Engineering supervisor jobs in WallsendCreate job alerts

We are recruiting an experienced CNC Setter/Operator to join an established engineering and manufacturing business. This is an excellent opportunity for a skilled machinist to work on precision-engineered components, ensuring high standards of quality, accuracy and production efficiency. The successful candidate will have experience setting and operating CNC machinery, working to tight tolerances and interpreting engineering drawings. Candidates with strong CNC turning experience who are keen to develop their milling skills will also be considered. Initial Shift Pattern Day Shift Monday to Thursday, 07:00 until 16:45 Pay rate: £16.46 - £18.46 per hour, depending on experience. Shift Opportunities - Once Fully Trained Following successful training and development, there will be opportunities to move onto enhanced shift patterns with increased pay rates. Day Shift Monday to Thursday, 07:00 until 19:00 17% shift allowance Example: £16.46 per hour increases to £19.26 per hour Night Shift Monday to Thursday, 19:00 until 07:00 36.29% shift allowance Example: £16.46 per hour increases to £22.43 per hour Key Responsibilities Set and operate CNC turning and milling machinery. Use Siemens CNC controls and demonstrate experience with relevant CNC control systems. Set up machines, tooling and workholding in line with setup sheets and production requirements. Interpret engineering drawings and manufacture components to specified dimensions and tolerances. Carry out first-off inspections and ongoing dimensional and visual quality checks. Use measuring equipment, including Vernier callipers, micrometers, PI tapes, CMM and inspection arms. Monitor machining processes, maintain cycle times and take corrective action where required. Create or amend setup sheets and ensure production requirements are clearly documented. Work safely with materials and components, including lifting and slinging where required. Operate forklift trucks where trained and authorised. Complete daily machine checks, routine maintenance and relevant production records. Maintain component identification and traceability, including cast numbers. Follow health and safety, housekeeping, environmental and 5S procedures. Communicate effectively with the Cell Leader and Supervisor to support production targets. Essential Skills and Experience Engineering apprenticeship or equivalent engineering qualifications and experience. Experience setting and operating CNC machinery. CNC turning and milling experience, or strong CNC turning experience with a willingness to learn milling. Experience using Siemens CNC controls. Experience machining components to demanding tolerances. Experience working with large components, including diameters of up to 2.3 metres. Ability to read and interpret engineering drawings. Experience using a range of precision measuring equipment in metric and imperial measurements. Understanding of quality procedures, inspection requirements and product traceability. A strong commitment to safety, quality and production efficiency. Desirable Experience Bespoke, one-off and low-volume manufacturing. Lifting and slinging. Benefits Company pension scheme with contributions matched up to 6%. Production bonus of up to £360 every quarter. Opportunity to increase earnings through enhanced shift working once fully trained. Opportunity to develop additional CNC milling skills and become multi-skilled across turning and milling. Kinetic plc is a Recruitment Consultancy with over 40 years' experience delivering staffing solutions to the engineering, manufacturing and technical industries. Kinetic plc treats all applications confidentially and we review all submissions. Those that do not meet the specification may not be contacted but their CV will be retained to be considered against future opportunities. IND1

Job Title: Systems & Compliance Manager. (Electrical Principal Duty Holder & Apprentice Coordinator) Direct Reports: Systems and Compliance Coordinator, apprentices and trainee engineers as assigned Main Purpose of the Role The Systems and Compliance Manager leads the Newcastle Office compliance function and provides independent assurance to the Operations Director that operational activities meet statutory requirements, company management systems and applicable industry standards. The role owns the local quality, health, safety and environmental management systems, coordinates audit and corrective action activity, supports electrical governance and NICEIC accreditation, oversees apprentice development and drives practical improvement across projects and office functions. Where the postholder is formally appointed and accepted as Principal Duty Holder or Qualified Supervisor, the relevant technical responsibilities form part of the role. Key Responsibilities Management Systems • Maintain and continually improve the local arrangements supporting ISO 9001, ISO 14001 and ISO 45001. • Ensure procedures, registers, records and controls remain current, proportionate and consistently applied. • Monitor changes in legislation, standards and client requirements and coordinate approved business actions. • Provide the Operations Director with clear compliance reporting, risks, overdue actions and recommended priorities. Electrical Governance and NICEIC • Maintain arrangements that support compliance with BS 7671, NICEIC scheme requirements and applicable electrical legislation. • Coordinate NICEIC assessment preparation, surveillance evidence, certification controls and follow-up actions. • Review electrical compliance performance and provide competent technical guidance within the authority of the role. • Verify that people undertaking electrical work are appropriately qualified, experienced, supervised and authorised. • Carry out Principal Duty Holder or Qualified Supervisor responsibilities only when formally appointed and accepted for those duties. Health Safety and Quality • Support implementation of company health, safety, environmental and quality policies. • Plan and undertake site inspections and compliance reviews, support company Health and Safety Manager • Lead or support incident and non-conformance investigations in line with competence and appointment. • Promote learning from audits, incidents, defects and client feedback. Project and Operational Assurance • Support project mobilisation and confirm that required compliance controls are established. • Review project documentation and evidence for compliance with company and client requirements. • Advise project teams on corrective action, document control and assurance priorities. • Identify recurring issues across projects and lead agreed improvement activity. Stakeholder Management • Work closely with the Operations Director, Operations Managers, project teams, commercial teams and group compliance functions. • Represent company professionally during audits, inspections, assessments and client meetings. • Maintain effective working relationships with NICEIC, certification bodies, the HSE, training providers, clients and main contractors where required. Authority and Accountability • Has direct access to the Operations Director for significant compliance and technical concerns. • May require corrective action, additional evidence or escalation where work does not meet approved requirements. • Must work within the limits of personal competence, formal appointment and company authority. • Must not undertake Principal Duty Holder or Qualified Supervisor duties unless the relevant appointment and external acceptance are in place. • Remains accountable for the accuracy of compliance reporting and for timely escalation of material risks. Essential Qualifications • NVQ Level 3 in Electrical Installation or an equivalent recognised qualification. • Current BS 7671 qualification. • Inspection and Testing qualification appropriate to the work undertaken. • ECS Gold Card. • SMSTS • IOSH Managing Safely, NEBOSH General Certificate or an agreed equivalent. • ISO 9001 internal auditor qualification or equivalent practical audit competence. • Full UK driving licence Desirable Qualifications • HNC or HND in Building Services Engineering, Electrical Engineering or a related discipline. • ISO 9001, ISO 14001 or ISO 45001 lead auditor qualification. • Membership of the IET, IOSH, CQI or another relevant professional body. • Teaching, assessing, coaching or mentoring qualification. Essential Experience • Managing compliance or assurance activity within building services, construction or a comparable regulated environment. • Maintaining and auditing ISO management systems. • Planning audits, writing clear reports and driving corrective actions to effective closure. • Applying electrical standards and supporting NICEIC accreditation or an equivalent certification scheme. • Providing credible advice to operational and project teams while maintaining independent judgement. • Mentoring apprentices, trainees or developing professionals. • Preparing management information and escalating significant risks to senior leaders. Knowledge • ISO 9001 quality management, ISO 14001 environmental management and ISO 45001 occupational health and safety management. • BS 7671 Wiring Regulations and relevant electrical safety legislation. • NICEIC scheme, certification and assessment requirements relevant to the business scope. • CDM Regulations and relevant duties under the Building Safety Act. • Internal audit methods, root cause analysis, corrective action and risk management. • Apprentice development, competence management and effective workplace mentoring. • Document control, common data environments and compliance management systems. Working Arrangements Based at the Newcastle Office with regular travel to project sites, regional offices, external assessments and training providers throughout the UK North region

Logistics Supervisor - Data Centre Construction Location: Blyth, UK Salary: £65,000-£75,000 per annum Sector: Data Centre / Mission-Critical Construction We're looking for an experienced Logistics Supervisor to join a growing team delivering large-scale data centre and mission-critical infrastructure projects in Blyth. This is a site-based role where you'll oversee day-to-day logistics operations, ensuring materials, deliveries, storage areas and site personnel are coordinated safely and efficiently. Working closely with subcontractors, suppliers and site management teams, you'll play a key role in keeping the project organised, minimising disruption and maintaining a safe working environment. Key Responsibilities Manage the site compound, including storage areas and material allocation. Schedule and coordinate deliveries to ensure materials arrive safely and on time. Liaise with subcontractors and suppliers regarding delivery requirements, access arrangements and off-site storage. Attend pre-start meetings to communicate site logistics procedures, storage limitations and delivery booking processes. Promote a just-in-time delivery approach to minimise congestion and maximise available storage space. Ensure loading and unloading activities are carried out safely within designated areas. Prevent congestion and obstructions on site access roads. Supervise site operatives, ensuring health and safety procedures and expected working standards are maintained. Monitor labour allocation, maintain records and prepare work reports. Support the wider project team in maintaining an organised and efficient site operation. Requirements Previous experience in a logistics or site supervision role, ideally within construction. A minimum of one year's experience in a similar position. Strong leadership skills, with experience managing operatives or site teams. Practical knowledge of delivery coordination, material handling, storage management and subcontractor liaison. A good understanding of construction site health and safety requirements. Strong organisational, communication and problem-solving skills. A third-level qualification in engineering or construction would be advantageous, although a strong trades background will also be considered. What's on Offer? £65,000-£75,000 annual salary. The opportunity to work on major data centre and mission-critical construction projects. Long-term career progression within a growing sector. Professional development opportunities. The chance to play a key role in the successful delivery of a large-scale construction project.Interested? If you have a background in construction logistics and are looking for your next opportunity within the data centre sector, get in touch to discuss the role in more detail. For more information please contact: (url removed) INDGLO

We are currently recruiting experienced Machine Operators to join our busy manufacturing environment located in Walker, Newcastle. Successful candidates will be responsible for setting up, operating, and monitoring production machinery while ensuring that all work is completed safely, efficiently, and in accordance with company quality standards. Temp to Perm opportunities Rotating 3-shift (Monday-Friday) Shift times: 6am-2pm / 2pm-10pm / 10pm-6am £15.71 per hour (38 hours) Location: Walker About You: Previous experience working in a similar Machine Operator or Manufacturing role. Practical experience operating a range of manufacturing or production machinery. Ability to read and follow Standard Operating Instructions, risk assessments, and technical procedures. Strong attention to detail and commitment to maintaining high-quality standards. Reliable, organised, and able to work effectively as part of a team. Flexible and willing to work a variety of shift patterns. Good understanding of Health & Safety procedures within a manufacturing environment. Key Responsibilities: Set up, operate, and monitor a range of manufacturing machinery. Carry out production activities in accordance with company procedures and quality requirements. Complete all relevant production, inspection, and quality documentation accurately. Comply with all Health & Safety regulations and company policies at all times. Follow Standard Operating Instructions (SOIs), risk assessments, and other relevant work procedures. Support assembly, testing, and other production activities as required. Ensure tools, equipment, and work areas are kept clean, organised, and returned to their designated locations after use. Report any equipment, quality, or safety issues to the appropriate supervisor. Work effectively as part of a team to meet production targets and deadlines. * Undertake any additional duties reasonably requested by the Shift Supervisor. If you are interested and have the necessary experience please apply via the link provided. Kinetic plc is a Recruitment Consultancy with over 40 years' experience delivering staffing solutions to the engineering, manufacturing and technical industries. Kinetic plc treats all applications confidentially and we review all submissions. Those that do not meet the specification may not be contacted but their CV retained to be considered against future opportunities. S&T1

Operations & Planning Coordinator Salary: £38,000 - £42,000, DOE Hours: 42.5 hours per week, Monday-Friday Location: Gateshead (Site-Based) Contract: Permanent Step Into a Key Operational Role. Are you an experienced operational professional looking to take the next step in your career? Do you have experience supervising teams, coordinating workloads, managing priorities and keeping operations running smoothly within a manufacturing, production, waste, recycling, logistics or industrial environment? We're recruiting on behalf of a well-established industrial business for an Operations & Planning Coordinator to play a central role in the day-to-day running of a busy site operation. This is a hands-on, site-based role offering genuine career progression into operational management. Working closely with production, engineering, transport, commercial, compliance and SHEQ teams, you'll help ensure plans are delivered safely, efficiently and in line with operational priorities. The Opportunity This role sits at the heart of the operation. You'll be responsible for coordinating activity across multiple departments, ensuring resources, labour, materials, transport and operational requirements are aligned to support the efficient running of the site. It's an ideal opportunity for someone who enjoys being out in the operation, building relationships with site teams, solving problems and making things happen, rather than being office-based all day. Key Responsibilities Coordinate daily operational and production activities across the site. Liaise with Plant Managers and operational teams to ensure priorities are understood and delivered. Work closely with Engineering regarding breakdowns, maintenance schedules and plant availability. Coordinate inbound and outbound transport activities with hauliers, suppliers and customers. Support operational planning to ensure resources are available to meet customer demand. Work with Commercial teams to align operational output with customer requirements. Liaise with Compliance and SHEQ teams to ensure safe and compliant operations. Monitor operational performance, downtime and site issues, escalating where required. Coordinate labour planning, holidays, absences, agency workers and shift cover requirements. Maintain accurate operational records, reports and documentation. Support stock management activities and communicate available volumes to relevant stakeholders. Act as a central point of contact for operational issues and ensure actions are completed. Support operational leadership during periods of absence and increased workload. You may currently be a Team Leader, Supervisor, Operations Coordinator, Production Coordinator or similar within a manufacturing, logistics, production or industrial setting. Essential Experience & Skills Experience working within a manufacturing, production, waste, recycling, logistics, transport or similar operational environment. Experience coordinating workloads, people and day-to-day operational activity. Strong communication and relationship-building skills. Ability to prioritise effectively in a fast-paced environment. Experience working with multiple departments and stakeholders. Strong organisational skills and attention to detail. Competent Excel, Outlook and general IT skills. A proactive approach, with the confidence to take ownership and solve problems. Full UK driving licence.Desirable Waste and recycling sector experience. Exposure to SHEQ or compliance processes. Experience supporting operational planning and resource allocation. IOSH qualification or similar operational health and safety training.Why Join This Company? Genuine route into Operations Management. Broad exposure across production, engineering, transport, commercial and compliance functions. Varied role combining planning, coordination and site-based operational activity. Stable and growing business operating within an essential industry sector. Supportive environment where development and progression are encouraged.This role has been created with succession planning in mind. We're looking for someone with the potential to grow into wider operational responsibilities over time. You'll gain exposure across all areas of the operation and have the opportunity to develop into an operational leadership role as your experience grows. Apply Today! Due to the high volume of applications we receive, we are unable to provide individual feedback. If you have not been contacted within 2 working days of submitting your application, please assume that on this occasion your application has been unsuccessful. If you require any reasonable adjustments during the recruitment process, please let us know. Office Angels is an employment agency and business. We are an equal-opportunities employer who puts expertise, energy and enthusiasm into improving everyone's chance of being part of the workplace. We respect and appreciate people of all ethnicities, generations, religious beliefs, sexual orientations, gender identities, abilities and more. By showcasing talents, skills and unique experiences in an inclusive environment, we help individuals thrive. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you. Office Angels acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. Office Angels UK is an Equal Opportunities Employer. By applying for this role your details will be submitted to Office Angels. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website

CBRE Global Workplace Solutions is a leading global provider of integrated facilities and corporate real estate management. We are seeking a highly motivated and experienced HVAC Technical Supervisor in Newcastle to oversee the operation of our managed facilities. The Engineering Supervisor will be responsible for managing the main building, ensuring preventative maintenance is performed, responding to client requests, and identifying and pursuing opportunities for facility improvements and additional service offerings. The Role Oversee and manage all aspects of facility operations, including but not limited to: Electrical, plumbing, fire safety, security systems, and building automation systems. Develop and implement preventative maintenance schedules and ensure adherence to these schedules. Respond to and resolve client requests and maintenance issues promptly and efficiently. Manage and oversee vendor relationships, including negotiating contracts, managing performance, and ensuring quality of service. Troubleshoot and diagnose issues with building systems. Read and interpret blueprints, schematics, and technical manuals. Develop and maintain strong relationships with existing clients, ensuring high levels of satisfaction and retention. Identify and pursue new business opportunities within assigned facilities and the surrounding area. Assist with the development of proposals and bids for new business. Opportunity to grow, supervisor and mentor a team of maintenance technicians and other facility staff. Prepare and submit regular reports on facility performance, maintenance activities, and financial metrics.Hours Monday - Friday 7am - 3pm / 9am - 6pm Overtime available Experience & Qualifications FM knowledge required F-Gas qualification Apprentice trained is advantageous Strong leadership skills Email for more information or apply online now! EQUAL OPPORTUNITIES We are an equal opportunities employer and do not discriminate on the grounds of gender, sexual orientation, marital or civil partner status, pregnancy or maternity, gender reassignment, race, colour, nationality, ethnic or national origin, religion or belief, disability or age

The Rewards and Benefits on Offer: A full-time and permanent role from day 1! A competitive basic salary Progression and development opportunities Free on-site parking Immediate start available A generous holiday entitlement Company Pension MTrec's New Opportunity: MTrec Recruitment are proudly representing our specialist manufacturing client in their recruitment for a Panel Wiring Supervisor. The role will lead a team of skilled operatives and oversee the day-to-day operations of the Panel Shop If you meet the person specification below, apply now for an immediate response! The Job you will do: Lead, motivate and manage a team of panel builders, wirers and manufacturing operatives, creating a positive culture of quality, safety and accountability. Be aware of daily workloads and targets to ensure the panel shop meets the agreed production schedule and delivery requirements. Monitor production progress throughout the day, identifying potential delays and taking corrective action early. Ensure panels are built accurately and consistently in accordance with drawings, wiring schematics, specifications and company procedures. Carry out regular in-process and final quality checks, ensuring workmanship meets company and customer requirements. Ensure the correct materials, components, tools and equipment are available to support production. Maintain high standards of housekeeping, organisation, health and safety and general shop-floor discipline. Work closely with Design, Engineering, Procurement, Project Management and Quality teams to resolve production and technical issues. Support the team with panel building and wiring activities where required, particularly during periods of high demand or on complex builds. Identify training and development requirements within the team and support the development of skills and future supervisors/leaders. Conduct regular 1:1s with team members, provide feedback and address performance or capability issues where required. Investigate recurring quality and production issues and support root cause analysis and corrective actions. Drive continuous improvement across productivity, quality, cost, lead times and manufacturing processes. Monitor agreed production KPIs and provide clear updates to the Production Manager on performance, issues, risks and resource requirements. Promote a right-first-time approach and ensure non-conforming work is identified, controlled and reworked appropriately. About you: 18th Edition IET Wiring Regulations – BS 7671 (desirable) HNC / HND in Electrical Engineering (desirable) NVQ (2356-99) Level 3 in Electrical Engineering or similar C&G 2391 Inspection & Testing. (desirable) Knowledge of ISO 9001 quality systems and manufacturing processes. Full UK driving licence. Proven experience working within an electrical panel manufacturing or electrical assembly environment. Previous experience supervising, leading or coordinating a production team. Good understanding of electrical panel construction, control panel wiring, components and manufacturing processes. Ability to read and understand electrical drawings, wiring schematics and technical documents TPBN1_UKTJ

Our client, a leading organisation operating within the EPC (Engineering, Procurement & Construction) sector, is currently seeking an experienced Subcontracts Supervisor to join their team in the Newcastle area. The successful candidate will be responsible for overseeing all subcontract administration activities throughout the project lifecycle, ensuring subcontractors deliver against commercial, contractual, safety, quality, and schedule requirements. This is an excellent opportunity to join a well-established business working on complex and high-value engineering and construction projects. • Manage and administer subcontract agreements from award through to project close-out., • Monitor subcontractor performance, ensuring compliance with contractual obligations and project requirements., • Review and process subcontractor applications for payment, variations, claims, and change orders., • Support tendering activities, including subcontractor prequalification, bid evaluations, and contract negotiations., • Maintain accurate subcontract records, correspondence, and reporting documentation., • Liaise with project, engineering, procurement, construction, and commercial teams to ensure effective subcontract management., • Identify and mitigate commercial and contractual risks., • Participate in subcontractor progress meetings and performance reviews., • Ensure all subcontract activities comply with company procedures, contractual requirements, and HSE standards., • Support the resolution of subcontract disputes and commercial issues., • Coordinate subcontract close-out activities, including final accounts and completion documentation., • Degree qualified in Engineering, Quantity Surveying, Construction Management, Business, Supply Chain, or a related discipline., • Significant experience in subcontract administration and management within EPC, construction, infrastructure, energy, power, or industrial projects., • Strong understanding of contract management principles and industry-standard forms of contract, including FIDIC., • Experience managing subcontract variations, claims, payments, and commercial negotiations., • Excellent communication, stakeholder management, and organisational skills., • Proficient in Microsoft Office and ERP/contract management systems #J-18808-Ljbffr

AtMETLEN Energy & Metals, we are catalysts for a sustainable future, positioned at the forefront of the energy transition while being a reference point for competitive green metallurgy at both the European and global levels. We are a global industrial and energy company operating across two highly interconnected and complementary sectors: Energy and Metals. With a consolidated turnover of €5,683 million and an EBITDA of €1,080 million, along with a workforce of over 7,627 dedicated individuals, we drive success through cutting-edge technology and diverse talent. We are committed to embracing new state-of-the-art technologies and advancements, propelling us towards a cleaner, brighter tomorrow. Our positive footprint extends across five continents, creating a lasting impact. At METLEN, we foster a culture of resilience, challenge, respect, excellence, andchange, empowering our diverse workforce to achieve remarkable outcomes. We are currently searching for a Project Planning Supervisor to join our Grid & Digital Solutions department, as part of the Thermal Power & HVDC division of Metlen, for the EGL1 Project, based in Newcastle upon Tyne. • Develop, implement, and maintain the overall project schedule and planning strategy, • Lead all planning and scheduling activities, including baseline schedule development and updates, • Coordinate with engineering, procurement, and construction teams to ensure schedule alignment and feasibility, • Monitor project progress, identify delays, and assess schedule impacts, • Develop recovery schedules and mitigation plans where required, • Ensure accurate progress measurement and reporting across all project phases, • Produce regular schedule reports, critical path analysis, and look-ahead plans for Project Management, • Interface with Cost teams to support integrated planning (time & cost alignment), • Manage planning tools, systems, and data quality across the project, • Support risk analysis exercises (e.g. schedule risk, delays, bottlenecks), • Master’s degree in a relevant field will be considered an asset, • Strong experience in project planning for large-scale EPC / energy projects, • Advanced use of Primavera (P6) is essential, • Excellent knowledge of planning methodologies, scheduling techniques, and critical path analysis, • Strong analytical and problem-solving skills, • Proficient in Microsoft Office (Excel, PowerPoint), • Experience in integrated project controls environments will be considered an asset, • Excellent command of the English language Follow us onLinkedIn and stay updated on our latest news We respect your personal data. All personal information in your application and CV will remain strictly confidential. At Metlen Energy & Metals we are proud to have Diversity and Inclusion at the centre of everything we do. We are committed to Equal Employment Opportunity regardless of race, colour, national origin, ethnicity, gender, age, disability, sexual orientation, gender identity or religion. #J-18808-Ljbffr

GM Performance Power Units (GM PPU) is seeking a highly skilled and motivated ESME Application Engineer to join our innovative engineering team in Concord, NC. This vital role focuses on safely building high-performance battery systems with the utmost quality. • Lead the design and optimization of the manufacturing process of the Energy Store (ES) and Energy Store Main Enclosure (ESME)., • Design and analyze production processes to ensure personnel safety at all times., • Work with the Quality Department to develop in-process and end-of-line quality procedures for various assembly processes including equipment planning, evaluation, and selection., • Actively contribute to the design process of the Energy Store (ES) and Energy Store Main Enclosure (ESME) to achieve Built-In Quality., • Conduct root cause analysis for any problems found throughout the build process and communicate findings to relevant team members while documenting learnings., • Create and maintain manufacturing operation work instructions., • Document and communicate assembly process developments and innovations clearly., • Work with the ERS Assembly Manager and High Voltage Safety Supervisor to ensure adherence to safety, quality, and operational standards., • Bachelor's degree in Engineering, Engineering Technology, or related field., • 2+ years of relevant industry experience in battery pack assembly engineering., • Experience programming industrial robots., • Proficient in 3D CAD software (CATIA, NX, SolidWorks, or similar)., • Excellent verbal and written communication skills with ability to work effectively in multidisciplinary teams., • Self-driven with a demonstrated ability to lead projects independently., • Experience in automotive, aerospace, motorsport, or other high-performance industries is a strong plus but not mandatory., • Proven experience in high-voltage system assembly, ideally in Formula 1, Formula E, or advanced automotive sectors., • Professional experience with one or more types of welding processes., • Knowledge of Design for Manufacture/Assembly (DFM/DFA) principles and tooling/jig design for motorsport or low volume high performance prototyping., • Knowledgeable about using PLCs for safety or automation related tasks., • Familiarity with F1 technical regulations, particularly those governing ESME components and power unit integration., • Strong, hands-on engineering mindset with a bias toward building, testing, and iterating., • Proactive, motivated, and able to take ownership of projects and contribute constructively to the team., • Excellent problem solver with strong analytical and critical thinking skills., • Effective communicator and collaborator, comfortable working in cross-functional environments., • Detail-oriented with commitment to high-quality work and continuous learning. Drive the Future of Motorsport with GM PPU! At GM Performance Power Units, we're more than an engineering team - we're shaping the future of Formula 1 technology. Join a culture where collaboration sparks creativity and innovation empowers breakthrough performance. Every contribution drives our competitive edge on the track. GM Performance Power Units and all affiliated companies are Equal Opportunity employer(s). Minorities, women, veterans, and individuals with disabilities are encouraged to apply. For more information regarding the EEOC, please visit We are not accepting calls, resumes or applications from recruiting firms at this time. #J-18808-Ljbffr

Experience of planning and supporting complex lifting operations and producing clear RAMS, lifting plans and supporting technical documentation. To provide strong, hands-on engineering leadership across JK Lifting’s lifting, inspection and site activities. Experience of heavy lifting, bespoke lift

Engineering Services Supervisor to lead engineering activities across lifting, inspection and site work.

Not Your Typical Supervisory Role. Not Your Typical Workplace. Afloat Services Supervisor Location: Balaena Tyne, with travel to project and customer sites as required. If you enjoy solving practical problems, leading from the front and delivering work where no two projects are the same, this could be your next move. We're looking for an Afloat Services Supervisor to help plan, mobilise and deliver ship repair projects at Balaena Tyne. You'll coordinate skilled people, equipment, materials and subcontractors, making sure every job is completed safely, efficiently and to the standard our customers expect. This is a role for someone who takes ownership. Someone who can turn a scope of work into a clear plan, keep teams focused under pressure and respond calmly when priorities change. Who are we? With a combined workforce of more than 2,000 employees and operations spanning Gibraltar, Padstow, Tyne, Birkenhead and Falmouth, Balaena is one of the UK's most dynamic and regionally anchored maritime groups. The integration of our facilities has created one of the world's most capable ship repair and shipbuilding groups, with a network of 12 dry docks and strategic reach across the UK and the Mediterranean. At Tyne, our Afloat Services team takes engineering expertise directly to vessels and customer locations. As we continue to grow as One Balaena, we need supervisors who combine strong trade knowledge with practical leadership, commercial awareness and an uncompromising approach to safety. What will you be doing? •Supervising afloat repair projects from preparation and mobilisation through to completion. •Visiting vessels, agreeing scopes with customers and helping to create clear, workable job packages. •Coordinating labour, subcontractors, equipment, materials and consumables. •Completing readiness checks and arranging transport to and from customer sites. •Keeping accurate job, cost and purchasing records, with the right purchase orders in place. •Recording, pricing and responding to customer enquiries, escalating technical or commercial queries when needed. •Keeping the Afloat Services Manager informed and working closely with colleagues to deliver for the customer. •Leading safe working practices, maintaining high standards of housekeeping and supporting HSEQ inspections and investigations. Who are we looking for? We're looking for a time-served tradesperson from a fabrication, marine or related engineering discipline who is ready to take responsibility for people, projects and customer delivery. This role will suit someone who: •Has experience in shipbuilding, ship repair, fabrication, marine or a similar engineering environment. •Can lead teams clearly and confidently, while remaining hands-on and approachable. •Is organised, methodical and able to manage changing priorities. •Communicates well with customers, colleagues, subcontractors and managers. •Understands that safety, quality and good housekeeping are fundamental to successful delivery. •Has previous supervisory or management experience, or is ready to take that next step. •Holds a full driving licence and can travel to customer and project locations as required. •Brings resilience, practical judgement and a positive outlook when challenges arise. What's in it for you? You'll join an experienced team that works together, supports each other and takes pride in delivering high-quality work. You'll have the opportunity to strengthen your project, commercial, purchasing and customer-management skills, with potential development towards Afloat Services Manager or Project Manager. If you'd like to get a feel for who we are, what we do and where we're heading, check us out online. Come and help us deliver something exceptional. TPBN1_UKTJ

We're looking for an MEP Technical Supervisor to join our Rail team based nationwide. Kier Rail is involved in some of the UK's most important rail infrastructure programmes, delivering everything from major station upgrades and accessibility schemes through to renewals and enhancement projects. With a growing pipeline of long-term work, multidisciplinary expertise and real opportunities for career progression, it's a fantastic place for people who want to make a tangible impact on the future of the UK's rail network. Location: Nationwide Hours: 42 hours per week - some flexibility on hours available if desired, just let us know when you speak to us. We are unable to offer certificates of sponsorship to any candidates in this role. What will you be responsible for? As an MEP Technical Supervior, you'll be working within the Rail team, supporting them in delivering high-quality M&E installations. This is an exciting opportunity to oversee the quality, safety, and compliance of mechanical and electrical installations on construction projects. As the client's on-site representative, you'll ensure that works are carried out to the required standards, specifications, and regulatory requirements, playing a vital role in delivering successful outcomes. Your day to day will include: Monitoring and inspecting M&E/E&P and SISS installations to ensure compliance with project drawings, specifications, and industry standards Conducting routine and ad hoc inspections, ensuring adherence to health, safety, and environmental regulations Maintaining detailed site records, including inspection reports, site instructions, and progress photos Overseeing, witnessing and verifying testing and commissioning activities to ensure system performance meets design intent Acting as the link between the Construction Responsible Engineer and subcontractors to ensure smooth coordination What are we looking for? This role of MEP Technical Supervisor is great for you if: You hold a technical qualification in Mechanical or Electrical Engineering (NVQ Level 3 or equivalent) Have extensive experience in M&E building services/E&P installation, inspection, testing and commissioning Possess strong knowledge of relevant building regulations, standards, and health & safety requirements * Hold a relevant Testing and Commissioning Qualification (C&G 2391 or similar) and CSCS card or equivalent site safety certification We're all about finding potential here at Kier, and transferrable skills are always welcome! So, even if you don't tick every box, please apply and we can have a chat. Rewards and benefits We're proud to be able to offer our brilliant people a wide variety of benefits that you can tailor to your needs. You can see more information of benefits here. Diversity and inclusion Making Kier a diverse and inclusive place to work is a huge priority for us. We're proud of the steps we've taken so far, but we know we must always do more. Our employees are key in shaping Kier's diversity and inclusion initiatives and our people have made a huge impact on how we work, by using their experiences to shape our policies. You can see our D&I action plan here. As a Disability Confident employer, we will ensure that a fair and proportionate number of disabled applicants that meet the minimum criteria for this role will be offered an interview. We look forward to seeing your application to #joinkier JBRP1_UKTJ

METLEN Energy & Metals in Newcastle upon Tyne seeks a Project Planning Supervisor to lead the Grid & Digital Solutions division on the EGL1 Project. You will develop, maintain, and manage the overall project schedule, coordinating with engineering, procurement, and construction teams. You will monitor progress, produce reports, analyze critical paths, and develop recovery plans to keep the project on track. Strong Primavera P6 skills and English proficiency are required. #J-18808-Ljbffr

Non-Negotiable Requirements of the Engineering Shift Supervisor. Desirable Requirements for the Engineering Shift Supervisor. The Engineering Shift Supervisor Will Benefit From.

Maintenance Manager (Hands-On) South Cumbria Salary: Base salary up to £50,000 per annum Days: Monday to Friday – No Weekend Working SimWest Engineering Recruitment is working with an established manufacturing business in South Cumbria to recruit a hands-on Maintenance Manager to lead it

We are looking for an experienced Regional Engineering Supervisor to lead and support multi-skilled engineering teams across the region. Manage engineering rotas and on-call coverage. You will be an experienced technical services professional with a strong background in hard services Facilities Mana

Maintenance Manager (Hands-On) South Cumbria Salary: Base salary up to £50,000 per annum Days: Monday to Friday – No Weekend Working SimWest Engineering Recruitment is working with an established manufacturing business in South Cumbria to recruit a hands-on Maintenance Manager to lead it

Maintenance Manager (Hands-On) South Cumbria Salary: Base salary up to £50,000 per annum Days: Monday to Friday – No Weekend Working SimWest Engineering Recruitment is working with an established manufacturing business in South Cumbria to recruit a hands-on Maintenance Manager to lead it

Seeking a motivated Engineering Supervisor for a market-leading manufacturer, reporting to the engineering manager.

Supervise an aerospace engineering workshop, leading a team, overseeing CNC operations, training personnel, and ensuring safety and quality standards.

Job Title: Engineering Supervisor. Clear progression pathway into Engineering Management and Reliability Leadership position.

Supervises engineering activities in a food manufacturing environment, focusing on safe, efficient operations, minimizing downtime, and maintaining food safety standards.

Do you have Engineering Supervisory experience in FMCG, Pharmaceutical, Food & Beverage, Chemical, Automotive, Plastics or Packaging environme. Job Title:Engineering Supervisor.

Weekend Engineering Supervisor. They are looking for a Weekend Engineering Supervisor to lead a team that carries out all PPM and reliability engine.

Lead a team of engineers and technicians to ensure plant and machinery are maintained, optimizing production uptime and team performance through proactive strategies and continuous improvement initiatives.

Supervise a busy service team in a global mechanical engineering company.

Supervise and manage the testing of fume and dust extraction systems, filtration, and related equipment.Involves office and field work, client interaction, and technical support.Requires P601 qualification and driving license.

Overseeing an Electrical Bias Engineer and building services operations, ensuring high standards of service, compliance, and client satisfaction in a commercial building.

Engineering Coordinator role reporting to Head of Engineering, managing two night shift teams.

Supervises daily assembly and testing operations in an R&D and prototype setting, focusing on team leadership, operational planning, process improvement, and safety.

Food manufacturing company seeks an Engineering Supervisor for a permanent, full-time role in Doncaster, UK.

Overseeing an Electrical Bias Engineer and building services operations, ensuring high standards of service, compliance, and client satisfaction in a commercial building.

Lead a hands-on engineering role in a fast-paced manufacturing environment, impacting production uptime and team performance.

Oversee day-to-day activities of assembly and test technicians, ensuring safe, timely, and quality delivery of work in a manufacturing environment.

Lead a team of engineers in an automated manufacturing setting, focusing on equipment reliability, proactive maintenance, and OEE improvement in a shift-based role.

Become a food delivery driver with Deliveroo and find work that suits you.Make money on your own schedule with your own vehicle (scooter, bike or car).Work when you want to, at the tap of a button.Scooter, bike or car (with license and insurance).Smartphone with iOS 12 / Android 6 or above.Proof of

Are you looking to benefit from a new career in Project Management?.If you are organised, competent, dependable and can communicate well and motivate those around you; you could have a truly rewarding future as a Project Manager.We do this using our specialised programme looking at placing candidate

Are you looking to benefit from a new career in Project Management?.Build a structured, high-earning career in Project Management – starting today.Looking for a career change? Naturally organised and good with people? Or ready to move into a leadership-focused role with real progression? ITOL Recr

Join the UK's Favourite Parcel Delivery Company!.Christmas Incentive 2026 - Earn an EXTRA 50p for every stop***.To qualify and be paid before Christmas Eve, simply:.Deliver parcels on our busiest days.At DPD, we provide the tech, start up support, and steady volume you need to build a high-earning r

The salary advertised is full time (35 hours per week, 52 weeks per year).Part-time hours / sessional posts will be pro-rated accordingly.This is a 40-week sessional post i.Monday - Thursday, 15:00-18:00.To assist in the provision of a high quality cleaning service within Council buildings.Please do