Trabajos environmental engineer en Reino Unido - Page 4

Job Title: Site Supervisor IR35 Status: Contract, 6 Months Expected Start Date: ASAP Expected Pay Rate: To be discussed Expenses: Fuel card & van provided Hours of Work: 37 hours per week Shift Pattern: Monday-Friday Flexible Working: Onsite Office Location: London Borough of Barking and Dageham Additional Travel: Required to additional sites Role Overview - Team / Projects / Key Challenges Site Supervisor - Domestic Retrofit Projects (ASHP & Solar Installations) We are seeking a hands-on Site Supervisor to support the delivery of domestic retrofit projects, primarily focused on replacing electric heaters with Air Source Heat Pumps (ASHPs) and installing solar PV systems in residential properties. This role would suit a qualified electrician, gas installer, or similar tradesperson looking to step into-or who has recently stepped into-a supervisory role. A valid CSCS card is essential, and experience working on the tools in a domestic setting is highly desirable. Key Responsibilities: Supervise operatives, subcontractors, and day-to-day site activities. Conduct site inductions, safety briefings, and toolbox talks, ensuring attendance is recorded. Monitor and enforce health and safety procedures in line with CDM 2015 and company RAMS and permit-to-work processes. Review and approve RAMS; issue permits for specific works as required. Display and enforce site rules and ensure welfare facilities are clean and operational. Undertake daily site safety inspections, including checks on waste management and general compliance. Support the Project Delivery Manager in coordinating work schedules and site activities. Manage site deliveries and logistics, ensuring minimal disruption to residents. Keep the Site File and project records updated. Ensure first aid provisions are in place and up to date. Lead daily briefings and accurately report incidents, including near misses. Liaise with internal teams and external stakeholders to address and resolve on-site issues promptly. Assist with external inspections (e.g., H&S inspectors) when required. Experience and Qualifications - Essential / Desirable: Experience in domestic construction, ideally involving retrofits, heating systems, or renewables. A positive, proactive attitude with a willingness to lead by example. CSCS card (essential). Trade qualification (e.g., electrician, gas installer, heating engineer) - highly beneficial. Knowledge of health and safety requirements; SMSTS, SSSTS or equivalent qualification is a plus. Strong communication and organisational skills. Ability to read and interpret construction drawings and specifications. First Aid trained (preferred). Understanding of legal responsibilities, welfare standards, and environmental compliance. Rullion celebrates and supports diversity and is committed to ensuring equal opportunities for both employees and applicants

Senior Engineer – Civil Engineering (Infrastructure) – Perm Opportunity Location: UK (Regional Projects) Job Type: Contract / Agency Hours: Full-time (45 hours per week) Duration: Long-term, secured work across major frameworks The Opportunity We are recruiting for an experienced Senior Engineer to join a leading civil engineering contractor delivering a wide range of infrastructure schemes across the UK. This is a long-term agency opportunity with secured work across major frameworks, covering highways, water, and reinforced concrete projects. The role offers involvement in complex, high-value schemes and the chance to work within a business that actively supports career development and internal progression. The Role The Senior Engineer will provide site engineering leadership across multiple projects within the region. The role includes supervising site engineers and trainees, ensuring accurate setting out, maintaining survey control, and supporting the wider site team in delivering projects safely, efficiently, and to specification. You will be involved from early project stages through to completion, contributing to planning, procurement, design coordination, and delivery. Key Responsibilities You will establish and maintain survey control for contracts and ensure that detailed setting out is completed in line with contract drawings and regularly checked for accuracy. You will oversee site engineers and support them in daily setting out activities, attending critical stages of the works where required. You will ensure compliance with health, safety, environmental, and quality standards, maintaining accurate records in line with organisational and legal requirements. You will support Site and Sub Agents in developing efficient construction methods and may deputise for them when required. You will take a leading role in quality management, including carrying out instrumental checks, completing quality audits, and producing Inspection and Test Plans along with Quality Management Plans. You will brief site teams on these processes and ensure that corrective actions are implemented where necessary. You will manage engineering resources, ensuring availability and suitability, while mentoring and developing junior engineers. You will contribute to recruitment activities and maintain accurate records relating to workforce and site activities. The role also includes preparing method statements, delivering toolbox talks, and maintaining strong working relationships with clients, subcontractors, and internal teams. You will support procurement activities through material take-offs and scheduling, assist in subcontractor scope development, and contribute to project planning and programme management. You will also support commercial performance by maintaining records, identifying risks and opportunities, and assisting in the management of variations. You will engage regularly with clients and stakeholders, attending meetings and ensuring that project delivery meets or exceeds expectations. Project Overview Initial works involve complex remediation packages within the water sector, including bridge and trunk sewer repairs across both rail and road interfaces. These projects are currently in the design phase, providing an opportunity to be involved from an early stage and contribute to innovative delivery solutions and temporary works planning. Requirements Candidates should have strong experience in setting out on civil engineering projects, particularly within infrastructure, highways, or reinforced concrete works. A degree or HNC in Civil Engineering or equivalent is required, along with a valid CSCS card. You should have a solid understanding of NEC contracts, CDM regulations, and project risk management. Experience using AutoCAD is expected, along with the ability to manage projects independently and maintain accurate reporting and records. Strong communication, leadership, and problem-solving skills are essential. Additional certifications such as SMSTS or IOSH Managing Safely, Temporary Works Coordinator, Confined Space Training, or Lift Supervisor qualifications would be advantageous, along with a proven track record of delivering similar large-scale infrastructure projects. What’s on Offer This role offers a competitive day rate depending on experience, long-term secured work, and the opportunity to contribute to major UK infrastructure projects. You will be part of a supportive working environment with clear opportunities for professional development and career progression. Apply Now If you are a Senior Engineer seeking a long-term contract role within major infrastructure projects, please apply or contact the recruitment team for further information

Job Title: Sub Agent – Roads and Networks, Location: Hinckley Point C, Somerset About Carmichael Recruitment: Carmichael Recruitment is a specialist recruitment agency supporting the construction and infrastructure sectors. We are known for delivering top-tier professionals for high-profile projects and are proud to play a key role in shaping the future of the UK’s infrastructure. Job Description: We are seeking a highly skilled Sub Agent with experience in roads, networks, highways, and drainage for an exciting role at Hinckley Point C, one of the UK’s most significant and complex nuclear projects. This is an excellent opportunity for engineers with a background in civil infrastructure to work on a cutting-edge, large-scale development. As a Site Engineer, you will be responsible for overseeing the day-to-day operations on site, ensuring quality, safety, and compliance with engineering standards for highways, drainage, and other key infrastructure works. You will work closely with the site management team and ensure that construction activities run smoothly and efficiently. Key Responsibilities: Manage and oversee the construction of roads, highways, and drainage systems on-site at Hinckley Point C. Ensure that all work is completed to the highest quality standards and in line with the project specifications. Provide technical support and advice to the site management team, subcontractors, and other stakeholders. Monitor and ensure compliance with health, safety, and environmental regulations. Supervise the day-to-day site operations and coordinate with surveyors, contractors, and other engineering teams. Perform setting out, surveying, and ensuring accurate construction of roads, drainage systems, and other civil infrastructure. Maintain detailed records, reports, and documentation of work progress and site activities. Address any technical issues or challenges that arise during construction and propose solutions. Liaise with the design team and ensure that designs are adhered to during the construction phase. Requirements: Proven experience as a Sub Agent with a focus on roads, highways, drainage, and civil infrastructure projects. Strong knowledge of civil engineering principles and construction processes. Experience in setting out and working with total stations and other surveying equipment. Familiarity with relevant industry standards, regulations, and health & safety practices. A relevant qualification in Civil Engineering or a related field (Degree/HNC/HND). Previous experience working on major construction projects, preferably in a nuclear, power, or large-scale infrastructure environment. Excellent communication, problem-solving, and organizational skills. Ability to work independently and as part of a collaborative team. A valid CSCS card and relevant safety certifications (e.g., SMSTS or SSSTS). Desirable Skills: Experience working at large-scale construction sites, ideally nuclear or power-related projects. Experience in managing teams of between 12 - 15 people Knowledge of 3D modelling and BIM (Building Information Modelling) would be advantageous. Familiarity with project management software and tools. Full UK driving license. If you are an experienced Sub Agent with expertise in roads, highways, drainage, and civil infrastructure, this is an exceptional opportunity to make your mark on a landmark project

Date Posted: 2026-01-26 Country: United Kingdom Location: Otis Vantage London, 10th Floor, Great West Road, Brentford, TW8 9AG, UK. Join OTIS - Moving People, Moving the World No one moves people like we do! Every day, we transport 2 billion people and maintain over 2.2 million customer units worldwide. You'll find our work in some of the world's most iconic buildings, including the Eiffel Tower, Empire State Building, and Burj Khalifa. This is your chance to join an industry that remains strong even during economic challenges-and learn from the best. Ready to get started? What Can You Expect? At OTIS, we offer one of the most comprehensive apprenticeship schemes in the lift industry. As an Engineer Apprentice, you'll work within a supportive team, combining hands-on experience with classroom-based learning to achieve an NVQ Level 3 qualification-essential for a career as a Lift and Escalator Engineer. Your training will be fully supported by OTIS and our trusted apprenticeship provider. Once qualified as a Service Lift Engineer, you'll manage a regular route, performing routine service visits and repairs. You'll diagnose electrical and mechanical issues and keep customers informed about the status of their equipment. Who Are We Looking For? We're seeking aspiring engineers with strong communication skills, a collaborative approach, and a proactive mindset. You should demonstrate: 5 GCSEs (or equivalent) at grade C/Grade 4 or above, including Maths, English, and a STEM subject A willingness to attend and complete all required training throughout the apprenticeship You will require your own laptop Salary Year 1: £16,416 Year 2: £21,888 Year 3: £30,096 Want to learn more? Click Here Otis Apprenticeship Programme ! At OTIS, we're committed to the ongoing development of every team member. We strongly support career progression and foster a culture that encourages innovation-because we know our people are the key to our success. If you live in a city, chances are we will give you a lift or play a role in keeping you moving every day. Otis is the world's leading elevator and escalator manufacturing, installation, and service company. We move 2.4 billion people every day and maintain approximately 2.4 million customer units worldwide, the industry's largest Service portfolio. You may recognize our products in some of the world's most famous landmarks including the Eiffel Tower, Empire State Building, Burj Khalifa and the Petronas Twin Towers! We are 72,000 people strong, including engineers, digital technology experts, sales, and functional specialists, as well as factory and field technicians, all committed to meeting the diverse needs of our customers and passengers in more than 200 countries and territories worldwide. We are proud to be a diverse, global team with a proven legacy of innovation that continues to be the bedrock of a fast-moving, high-performance company. When you join Otis, you become part of an innovative global industry leader with a resilient business model. You'll belong to a diverse, trusted, and caring community where your contributions, and the skills and capabilities you'll gain working alongside the best and brightest, keep us connected and on the cutting edge. We provide opportunities, training, and resources, that build leadership and capabilities in Sales, Field, Engineering and Major Projects and our Employee Scholar Program is a notable point of pride, through which Otis sponsors colleagues to pursue degrees or certification programs. Today, our focus more than ever is on people. As a global, people-powered company, we put people - passengers, customers, and colleagues - at the center of everything we do. We are guided by our values that we call our Three Absolutes - prioritizing Safety, Ethics, Quality in all that we do. If you would like to learn more about environmental, social and governance (ESG) at Otis click here . TPBN1_UKTJ

BMS Project Manager Central London Permanent £65,000 - £85,000 + Package + Car allowance Job Description: Our client is an established Building controls company and they are currently looking to expand their existing team and take on another BMS Project Manager. The majority of projects will be based in Central London, and there is option to work from home where needed. You will be required to: • Take responsibility for the attendance of regular contract meetings to establish project status and conditions, • Focus on site based customer requirements, • Provide technical assistance to both customers and colleagues, • Ability to manage and exceed yearly financial targets, • Maximisation of gross profit margins on individual contracts, • Manage the financial and monthly purchases of equipment to eliminate stock carrying, • Manage monthly contract ordering budgets with regards suppliers' equipment, • Ensure goods are delivered to site in the same month they are purchased to maximise the company cash flow, • Ensure a good and comprehensive knowledge of suppliers installed systems, • Keep up to date with technological & Environmental developments within our applied industry, • Have good sound knowledge of mechanical and electrical basic principles of operation and how to correctly apply them to required BMS Systems, • Provide general technical knowledge and assistance to both skilled and unskilled customers, in appropriate detail, • Must be willing to provide additional hours of work to satisfy workload requirements, • Take responsibility as lead engineer for each project allocated and implement internal contractual procedures, • Organisation and transition of contracts from handover to completion whilst achieving targets of quality, budget and timescale, • Design of control strategies, points' lists and system descriptions for commissioning team and operation and maintenance manuals Candidate Specification: • Excellent general & personnel management skills, • Knowledge of Project Financial Management, • Ability to accurately complete conversion of Project Design to Working System, • Personnel knowledge of BMS and ability to train others, • Good time keeping and smart appearance, • Health and safety awareness, • Flexible approach, • Good People skills, • Good Organisational skills, • BMS Systems knowledge to include Trend or Tridium systems, • Electrical knowledge, • Knowledge of contract law and standard forms of contract, • Excellent I.T. Skills

Mobile Chiller Engineer - FM service provider - London & M25 - Paying Up to £60,000+ Package CBW Staffing Solutions are currently recruiting for a Mobile Chiller Engineer to work on behalf of an Air Conditioning & Refrigeration company based in SE London/Kent. The successful candidate will be a fully qualified Chiller Engineer with NVQ Level 2/3 in Refrigeration & Air Conditioning, F-Gas Category, City & Guilds 2079, or equivalent and a have strong understanding in the installation, maintenance, and repair of commercial and industrial chiller systems. As the Chiller Engineer you will be required to attend a number of commercial sites, Universities, Hospitals and offices covering London & SE, where you will carry out PPM on diverse chiller systems, including air-cooled, water-cooled, absorption, and adiabatic chillers, to ensure optimal performance and longevity. You will be self-motivated, technically proficient, customer-focused, and possess excellent problem-solving abilities. In return the company is offering a competitive salary of up to £60,000, overtime, further training and a potential route into further career progression. Hours of work Monday to Friday - 08:00am to 17:00pm Key Responsibilities Preventative Maintenance (PPM): Conduct routine preventative maintenance on diverse chiller systems, including air-cooled, water-cooled, absorption, and adiabatic chillers, to ensure optimal performance and longevity. Diagnose complex mechanical, electrical, and refrigeration faults efficiently and accurately, performing effective repairs on components such as compressors, condensers, evaporators, control systems, pumps, and pipework. Carry out F-Gas leak detection, recovery, and recharging in strict compliance with current F-Gas regulations and environmental standards. Proactively identify opportunities for system optimization and efficiency improvements, advising clients on best practices and potential upgrades. Liaise professionally and directly with clients, providing clear explanations of work carried out, identifying any further required works, and building strong working relationships. Complete accurate service reports, timesheets, expense submissions, and other administrative tasks promptly and efficiently, utilizing mobile technology. Adhere strictly to all company and site-specific health and safety regulations, including risk assessments and method statements. Participate in an out-of-hours on-call rota for emergency breakdowns as required which is currently every 14 weeks. Provide technical guidance and support to junior technicians or apprentices when appropriate. In return, my client is offering a very competitive package including : 25 days holiday + Bank Holidays Van & Fuel Card provided Travel time: 1 hour each way Tablet & Work phone provided Full company uniform Lots of overtime available Qualifications & Experience NVQ Level 2/3 in Refrigeration & Air Conditioning, City & Guilds 2079, or equivalent Current F-Gas Category 1 certification (Essential). Strong track record of working on various commercial and industrial chiller manufacturers. Full, clean UK Driving Licence (Essential) Strong understanding of refrigeration cycles, thermodynamics, electrical control systems, and HVAC principles. Proven ability to read and interpret electrical schematics, wiring diagrams, and technical drawings to diagnose faults. TPBN1_UKTJ

Senior Mechanical Design Engineer - Water & Wastewater Location: Hybrid (minimum 3 days per week in office/site) Type: Permanent The Role An excellent opportunity has arisen for a Senior Mechanical Design Engineer to take a leading role within a growing design team, delivering high-quality mechanical solutions across a range of water and wastewater treatment projects. You will take technical ownership of mechanical design packages from concept through to completion, ensuring all systems meet regulatory, safety, and client requirements. Working closely with multidisciplinary teams, you will deliver fully integrated solutions while supporting project delivery through design, procurement, installation, and commissioning stages. This role also offers the opportunity to mentor junior engineers, influence best practice, and drive innovation and continuous improvement across projects. Key Responsibilities ·Lead the design and development of mechanical systems for water and wastewater treatment projects ·Take ownership of designs from concept through to detailed design and delivery ·Produce and review technical documentation, calculations, and specifications ·Collaborate with multidisciplinary teams to ensure integrated design solutions ·Conduct and support design reviews, risk assessments, and HAZOPs ·Provide technical support during procurement, installation, and commissioning ·Ensure compliance with industry standards, HSE requirements, and regulations ·Mentor and support junior engineers within the team ·Drive innovation, efficiency, and continuous improvement across projects Experience Required ·7-10 years' experience in mechanical design engineering ·Ideally within the water or wastewater sector ·Proven track record delivering mechanical designs on treatment or process-led projects ·Strong knowledge of mechanical equipment such as pumps, pipework, valves, blowers, and filtration systems ·Experience supporting commissioning, troubleshooting, and optimisation of systems Skills & Competencies ·Strong leadership and mentoring capabilities ·Excellent problem-solving skills with a practical, solution-focused approach ·Ability to manage multiple projects while maintaining quality and accuracy ·Strong communication skills with the ability to engage stakeholders at all levels ·Collaborative approach, working effectively across multidisciplinary teams ·Good understanding of mechanical design standards, HSE, and environmental regulations Qualifications ·Degree in Mechanical Engineering or a related discipline ·Chartered Engineer (CEng) status or working towards ·Proficiency in design software such as AutoCAD, SolidWorks, or similar

We are currently working alongside a civil enigneeirng and construction contractor to recruit an experienced Site Agent to be based on a civil highways project in Kent valued c£20m As a Site Agent you will be responsible for the management of various construction sites at the mid level value , in order to achieve required project delivery to the customers objectives, while maintaining standards of health and safety, quality, environmental impact and cost control. Responsibilities: • Be responsible for the successful delivery of projects • Supervise the delivery to the project programme • Understand and interpret drawings and specifications • Provide support to the project team • Ensure all staff, subcontractors and visitors are properly inducted, meet the competencies required of them and hold relevant qualifications and tickets • Undertake an ambassadorial role, representing the Business to customers, the public and official bodies • Comply with Company procedures and legal obligations at all times, promoting best practice • Establish safe working cultures and practices and environmental compliance • Maintain and manage construction sites and subcontractors, developing positive working relationships About You • Considerable experience in Civil Engineering • Working knowledge of JCT / NEC contract conditions, CDM regulations, design management, programme and risk management and cost control including forecasting, actual cost and value reporting • Good knowledge of specifications and testing regimes relevant to general civil engineering Requirements * Proven experience as a Site Agent or Senior Site Engineer * Strong background in civil engineering works * Excellent knowledge of health, safety, and environmental compliance * Strong leadership, communication, and problem-solving skills * Relevant engineering or construction qualification * Valid Safe Pass / CSCS (or equivalent) * Confined Spaces, Temporary Works, or EUSR cards (desirable)

Geotechnical Engineer – Watford An exciting opportunity has arisen for a Geotechnical Engineer to join a well-established, multidisciplinary engineering consultancy at its Watford office. This role offers the chance to work on a diverse range of projects across sectors including infrastructure, residential, commercial, and industrial developments. The Role You will be responsible for supporting and delivering geotechnical and geo-environmental assessments from initial site investigation through to design and reporting. The role involves both office-based analysis and site-based work, offering a balanced and engaging workload. Key Responsibilities Planning, supervising, and interpreting ground investigations Producing factual and interpretative reports Undertaking geotechnical design (foundations, earthworks, retaining structures) Liaising with clients, contractors, and internal teams Ensuring compliance with relevant standards and health & safety regulationsRequirements Degree in Civil Engineering, Geotechnical Engineering, Engineering Geology, or a related field Relevant experience in geotechnical engineering or ground investigation Working knowledge of UK standards and guidance Strong analytical and report-writing skills Ability to manage time effectively and work both independently and as part of a teamDesirable Progression towards chartership (ICE/GeolSoc or similar) Experience with geotechnical software packages Full UK driving licenceWhat’s on Offer Competitive salary and benefits package Support for professional development and chartership Exposure to a wide variety of projects Collaborative and supportive working environmentIf you are looking to develop your career within a dynamic consultancy environment, we would be keen to hear from you

Process Design Engineer - Water & Wastewater Location: Hybrid (minimum 3 days per week in office/site) Type: Permanent The Role An excellent opportunity has arisen for a Process Design Engineer to join a growing design team, supporting the delivery of high-quality process solutions across a range of water and wastewater treatment projects. You will play a key role in the planning, development, and delivery of process designs, working closely with multidisciplinary teams to ensure solutions are efficient, compliant, and fit for purpose. This role offers exposure across the full project lifecycle, from concept design through to project delivery and review. You will also contribute to technical documentation, design optimisation, and safety processes, helping to drive innovation, sustainability, and operational excellence within the team. Key Responsibilities ·Support the design and development of water and wastewater treatment processes ·Produce key process documentation including PFDs, mass balances, P&IDs, and control philosophies ·Work collaboratively with multidisciplinary teams to deliver coordinated design solutions ·Assist in design optimisation to improve performance, efficiency, and cost-effectiveness ·Participate in HAZOP studies, risk assessments, and technical reviews ·Ensure compliance with relevant regulations, standards, and best practice ·Contribute to project delivery across design, testing, and implementation stages ·Support continuous improvement and innovation within process design Experience Required ·3-5 years' experience in process engineering ·Ideally experienced within the water or wastewater sector ·Exposure to treatment plants or process-driven infrastructure projects ·Understanding of water quality standards and environmental regulations Skills & Competencies ·Strong analytical and problem-solving skills ·Practical, solution-focused approach to engineering challenges ·Good communication skills with the ability to work across teams ·Well-organised and detail-oriented ·Ability to manage workload independently ·Proactive mindset with a willingness to learn and develop ·Good understanding of water and wastewater treatment processes and technologies ·Awareness of relevant industry standards and regulations Qualifications ·Degree in Chemical Engineering, Process Engineering, Environmental Engineering, or a related discipline

Commissioning Engineer • Location: East of England (with travel to sites across the region) * Salary: £60,000 to £85,000 + package (depending on experience) * Permanent Turner Lovell are supporting a leading infrastructure services organisation with the recruitment of Commissioning Engineers to support the delivery of high voltage distribution projects across the East of England. The organisation is a major Independent Connection Provider (ICP), delivering essential infrastructure across the UK. They specialise in the installation, maintenance, and connection of electrical distribution networks, supporting reliable and efficient energy systems for customers. You will be part of a specialist substation build team working across 11kV, 33kV, and 132kV networks. We are seeking experienced Commissioning Engineers to play a key role in testing and commissioning high voltage plant and apparatus onto live distribution networks. This position will suit individuals who are technically strong, proactive, and confident working across multiple stakeholders within a project environment. Key Responsibilities Test and commission high voltage plant and apparatus, integrating with existing protection schemes Produce and implement commissioning plans in line with project requirements Provide technical support across projects, resolving design and site-based issues Attend client meetings and collaborate with project teams to ensure successful delivery Ensure all work is carried out in compliance with current legislation and safety standards Review and amend technical drawings where required Support and mentor junior team members, promoting technical development and best practice Requirements Proven experience in testing and commissioning on high voltage distribution networks (132kV) Experience delivering substation projects for an ICP Strong understanding of engineering standards, procedures, and legislation Knowledge of current Health, Safety, and Environmental regulations Excellent problem-solving skills and a proactive, methodical approach Ability to communicate effectively with clients, designers, and project teams Degree in Electrical Engineering or related discipline Full UK driving licence and willingness to travel This opportunity would suit candidates from power distribution, utilities, or infrastructure environments looking to take on a key role within a growing project delivery team. Experience working on UK distribution networks (132kV) would be highly advantageous. If you are looking to join a forward-thinking organisation delivering critical infrastructure projects and want to play a key role in commissioning and energising electrical networks, please apply to Turner Lovell for further information or contact Hope Brown on 020 3885 9505/ TPBN1_UKTJ

Company Profile A well-established engineering consultancy with an international presence, delivering innovative and sustainable solutions across infrastructure, development, and regeneration projects. The company has a strong geoenvironmental capability, supporting site investigation, risk assessment, and remediation strategies. Known for its collaborative culture and technical excellence, it offers exposure to complex projects and clear opportunities for career progression. The company combines technical excellence with a collaborative, people-focused culture, offering exposure to high-profile projects and clear opportunities for career development. Due to increase in workload our client is seeking a geoenvironmental engineer with a minimum of 4 years experience for there thriving London office and make a meaningful impact on the future of our environment. About the role As part of our growing geotechnical team, you'll have the opportunity to take ownership of projects and shape the direction of our environmental services. Join a lively, hard-working, and diverse practice that values individual enterprise, creativity, and disciplined team endeavour. • Permanent role with a supportive and inclusive team culture, • Opportunity to manage small/medium projects from inception to delivery, • Training and development opportunities to support your career growth. Preferred Requirements: Oversee contaminated land assessments and remediation strategies, liaising with client teams, regulators, and multidisciplinary project teams Support and deliver a wide range of contaminated land risk management services, from early-stage desk studies to site investigations, risk assessments, environmental due diligence, and material management Ensure that budget, programme, and quality requirements are met for the projects you manage Demonstrate expertise in contaminated land and environmental risk management Possess strong communication, reporting, and project management skills Minimum of 4 years experience ideally in a consultancy setup. Preferred Qualifications: Degree in environmental science, geology, earth sciences, or a related discipline Strong experience in Phase I and II assessments, site investigation, and remediation strategies Familiarity with UK environmental regulations and industry guidance, with chartered status (e.g., CEnv, CGeol) or working towards chartership desirable Benefits: Competitive salary with regular reviews Flexible / hybrid working options 25 days annual leave + bank holidays Company pension scheme Private healthcare or health cash plan Professional development & chartership support Exposure to high-profile, diverse projects Paid professional memberships Training and CPD support Collaborative, design-led working environment Diversity & Inclusion Statement We are committed to an inclusive workplace where everyone feels valued and supported. We welcome applications from all backgrounds and promote equal opportunities for all. TPBN1_UKTJ

A specialist independent building services consultancy has, due to planned expansion and a full workload, an immediate requirement for a high-end intermediate / senior level design engineer to join their design team in their London office. They work in a wide variety of project sectors including, commercial, residential, educational and industrial work. As a mechanical design engineer you would be expected to provide effective designs, conduct surveys, prepare feasibility reports, specifications, provide site supervision and management of mechanical services installations, following health and safety, QA and environmental policies and procedures. Your should be qualified to a minimum of HND level and have a minimum of 3 years' UK building services design experience. Your should have a demonstrable UK building services background. Your responsibilities would include: • Preparing AutoCAD drawings in accordance with company CAD standards and design calculations using industry leading software (i.e. Hevacomp)., • Assisting in preparing reports such as feasibility studies, design reports, specifications and contract administration following Quality Assurance and Health and Safety procedures and company administration policies., • Maintaining an up to date knowledge of current standards and legislation., • Attending site surveys and client meetings., • Implementing technical standards and supporting the business development. Compliance with CDM Regulations must be ensured., • Undertaking detailed site surveys and design reviews., • Understanding of engineering systems and the ability to report on both mechanical and electrical disciplines during meetings is essential., • You would need an appreciation of contract administration, project management and site supervision/inspections and assist with the financial control of project(s) liaising with Project Director., • Mentoring and assisting the graduate engineers. Skills and Experience • Proficiency in 2D and 3D CAD packages such as AutoCAD and Revit MEP or Bentley AECOsim., • Experience of IES modelling software would be advantageous (but not essential)., • Understanding of BIM Level 2 and BIM project deliverables structure., • Undertaking mechanical designs from inception to completion, sometimes within tight deadlines whilst maintaining accuracy and quality., • CEng qualified or working towards CEng., • Appropriate membership of professional body, i.e. CIBSE, IMECHE, IET

AC / Refrigeration Engineer The Opportunity We are seeking a skilled AC / Refrigeration Engineer looking to take the next step in their career. If you are passionate about delivering high-quality service, enjoy fault finding and problem solving, and take pride in your technical expertise, this is an excellent opportunity to join a professional and forward-thinking engineering team. This role offers variety, responsibility, and genuine career progression. You will work across a diverse portfolio of commercial sites, delivering planned preventative maintenance (PPM) and reactive maintenance on HVAC and refrigeration systems, while maintaining the highest standards of safety, compliance, and service delivery. About Us We are a safety-led, quality-driven engineering organisation trusted to maintain and support a wide range of commercial environments. Our engineers ensure the reliable operation of critical HVAC and refrigeration systems, delivering services in line with contractual KPIs and SFG20 maintenance standards. We are committed to continuous improvement, professional development, and maintaining a strong health, safety, and environmental culture across the business. Key Responsibilities Maintenance & Operations • Deliver Planned Preventative Maintenance (PPM) and reactive maintenance in line with contractual KPIs and SFG20 standards - Diagnose, repair, and maintain air conditioning and commercial refrigeration systems - Take ownership of tasks from initial call-out through to completion, ensuring accurate job documentation Technical & Compliance • Diagnose system faults using appropriate diagnostic tools and produce clear technical reports - Maintain F-Gas records, site logbooks, and compliance documentation - Ensure all work complies with industry regulations, company procedures, and health & safety standards - Upload completed job reports and documentation to the CAFM system Client & Team Engagement • Build and maintain strong working relationships with clients and site contacts - Collaborate with engineering colleagues and wider teams to achieve service objectives - Deliver a professional, customer-focused service at all times Efficiency & Continuous Improvement • Manage materials and spare parts efficiently, identifying shortages or improvement opportunities - Proactively identify risks, hazards, or system issues to maintain a safe working environment - Contribute ideas to improve engineering processes, operational efficiency, and service delivery Flexibility • Participate in overtime and additional works when required to support operational demands or urgent maintenance needs Requirements Experience & Qualifications • Minimum 2 years’ experience as an AC / Refrigeration Engineer - Relevant NVQ or City & Guilds Level 3 qualification (6187 or equivalent) - F-Gas Handling & Management (City & Guilds 2079) certification - Category 2 certification (or equivalent) Skills & Competencies • Strong fault-finding and diagnostic skills - Excellent verbal and written communication - Experience using CAFM systems, ideally via handheld devices - Strong time management and attention to detail - Ability to work independently and as part of a team - Customer-focused with a commitment to high service standards - Proactive, motivated, and keen to develop professionally Why Join Us? This is a fantastic opportunity to join a supportive, safety-focused organisation where your expertise is recognised and valued. We offer: • Stable, long-term career opportunities - Professional training and development - Exposure to varied and technically challenging commercial environments - A collaborative engineering team culture - The opportunity to make a real impact on client operation

Our environmental services contractor is seeking a Section engineer to join their Stratford based team on a permanent basis with site visits on London based projects. The Section Engineer will join a growing delivery team, supporting sewage and drainage infrastructure works across the UK. This role is to replace a key vacancy and will play a critical part in delivering projects from pre-construction through to final handover. Works include new sewer installations, construction of manholes (MH), drainage diversions, and associated civil engineering works, delivered on behalf of water companies and major principal contractors, including experience aligned with high-profile infrastructure projects such as HS2. Role Responsibilities The successful candidate will take ownership of a section of works and be responsible for: Pre-Construction Preparation and review of documentation including: RAMS (Risk Assessments & Method Statements) Permits to Work ITPs (Inspection & Test Plans) Temporary Works documentation Supporting programme development and buildability reviews Liaising with client representatives, water companies, and principal contractors Construction Phase Setting out for drainage and sewer works Managing Site Engineers and site teams Supervising groundwork, temporary works, and permanent works Construction of new manholes and sewer lines Ensuring compliance with specifications, quality standards, and H&S requirements Coordination with Temporary Works Coordinators and design teams Handover Preparation of as-built drawings Compiling QA documentation and handover packs Supporting client sign-off and completion procedures Skills/experience/qualifications Proven experience as a Section Engineer (or Site Engineer ready to step up) within sewage, drainage, or utilities infrastructure Strong background in groundwork, temporary works, and permanent works Experience constructing new manholes and sewer systems Competent in setting out Experience managing site engineers and site teams Strong documentation and QA experience (RAMS, ITPs, permits, as-builts) Confident working with water companies and principal contractors CSCS card Strong leadership and communication skills Proactive and solution-focused mindset Ability to manage works from design stage through to completion Strong understanding of UK health & safety regulations Organised, detail-oriented, and quality-driven Desirable: Experience working on major infrastructure projects (e.g. High Speed 2) Confined Space qualification Temporary Works Supervisor (TWS) or related qualification Appointed Person (AP) qualification (beneficial but not essential) Benefits Competitive salary circa £ 42k per annum Office based in Stratford with sites across London Company vehicle or allowance Pension scheme Career progression within a growing civil engineering contractor Opportunity to work on high-profile UK infrastructure projects

Role Overview Would you like to join a truly international, talent driven company that values Safety, Ethics, Quality, Innovation and Employee Opportunity? We are currently seeking an experienced Lift and or escalator engineer to join our Transport for London team, covering our London Underground escalator portfolio. Your priority is to ensure the safety of passengers and technical stakeholders by safely maintaining a portfolio of escalator units. On a typical day you will: Carry out breakdown and repair work on all equipment across site (lift & escalators) within the portfolio to achieve continual operation Work within London Underground network, managing the portfolio of escalator's within it Respond proactively and quickly to fix any breakdowns, aiming to achieve first time fix Liaise directly with the customer while on site to build a good working relationship What you will need to be successful You will be qualified to at least NVQ Level 3 in Lift and or Escalator Engineering with significant experience in service and maintenance of escalators To be able to work nights. You must be an experienced escalator engineer with in-depth knowledge of a variety of different brands of equipment Hold a valid UK drivers license Flexibility is important and overtime maybe required You have good skills in mechanical and electrical engineering You are a committed professional, with safety as your priority You are comfortable communicating to others You are curious, adaptable, and you know how to work alone or in a team You are comfortable using electronic and digital tools. What's In it For Me / Benefits You will receive a long-term employment contract with the world market leader in a crisis-proof industry On top of a competitive basic salary, you will have the opportunity to supplement your earnings with Overtime Benefits which include pension, Life Assurance, Childcare Vouchers, Paid Maternity, Paternity and Sick leave, reduced rate private medical insurance, and access to the Otis Rewards Scheme Employee Scholarship Scheme - Otis will support you through your studies if you wish to gain further qualifications including Bachelors and Masters Degrees We will train you intensively in the areas of technology, processes & soft skills and you can exchange ideas with experienced colleagues at any time. You will receive modern and high-quality work clothes, your own tools with an iPhone. The health and safety of our employees is our top priority. We promote this through regular training on the subject of occupational health and safety as well as through an employee support program. If you live in a city, chances are we will give you a lift or play a role in keeping you moving every day. Otis is the world's leading elevator and escalator manufacturing, installation, and service company. We move 2.4 billion people every day and maintain approximately 2.4 million customer units worldwide, the industry's largest Service portfolio. You may recognize our products in some of the world's most famous landmarks including the Eiffel Tower, Empire State Building, Burj Khalifa and the Petronas Twin Towers! We are 72,000 people strong, including engineers, digital technology experts, sales, and functional specialists, as well as factory and field technicians, all committed to meeting the diverse needs of our customers and passengers in more than 200 countries and territories worldwide. We are proud to be a diverse, global team with a proven legacy of innovation that continues to be the bedrock of a fast-moving, high-performance company. When you join Otis, you become part of an innovative global industry leader with a resilient business model. You'll belong to a diverse, trusted, and caring community where your contributions, and the skills and capabilities you'll gain working alongside the best and brightest, keep us connected and on the cutting edge. We provide opportunities, training, and resources, that build leadership and capabilities in Sales, Field, Engineering and Major Projects and our Employee Scholar Program is a notable point of pride, through which Otis sponsors colleagues to pursue degrees or certification programs. Today, our focus more than ever is on people. As a global, people-powered company, we put people - passengers, customers, and colleagues - at the center of everything we do. We are guided by our values that we call our Three Absolutes - prioritizing Safety, Ethics, Quality in all that we do. If you would like to learn more about environmental, social and governance (ESG) at Otis click here . TPBN1_UKTJ

Our client is seeking a Technical Superintendent to join their team on a full-time basis in London. The Technical Superintendent, working in close collaboration with the Operations and QHSE teams and supported by a Technical Officer or Purchaser, is responsible for overseeing maintenance planning, repairs, procurement, and reporting. This role provides leadership and technical guidance to onboard teams while representing the company in interactions with owners, auditors, and other external parties. THE SUCCESSFUL APPLICANT * Proven experience as a Vessel Manager or Technical Superintendent, with a solid background in the technical and operational management of vessels.(preferred) * Deep technical understanding of shipboard systems is essential. A Second Engineer (Class 2) CoC or higher is preferred. * Practical experience in RoRo or short-sea shipping operations, with knowledge of their specific maintenance, port turnaround, and regulatory requirements. * Familiarity with SOLAS, MARPOL, ISM, ISPS, and other international conventions governing vessel safety, environmental protection, and operational compliance. * Proficient in English, with strong leadership, communication, and interpersonal skills to engage effectively with ship and shore-based teams. * Flexibility to travel domestically and internationally to attend vessel dry dockings, client meetings etc. * Valid EU or UK driving license. JOB DESCRIPTION * Oversee the technical management of 3–5 vessels, ensuring safe, efficient operations in full compliance with international conventions, flag-state regulations, class requirements, and company standards. * Plan, coordinate, and supervise all maintenance and repair activities including dry-dockings, intermediate surveys, and major overhauls while ensuring that work scopes, budgets, and schedules are clearly defined and effectively executed. * Monitor vessel condition and performance, including machinery reliability, fuel efficiency, and planned maintenance (PMS) compliance, initiating corrective actions where required. * Conduct regular vessel inspections (typically quarterly) to assess technical condition, verify safety and environmental standards, and follow up on corrective actions from audits or inspections. * Prepare, justify, and manage vessel budgets, tracking actual expenditures and ensuring cost control within owner-approved limits; escalate significant variances to the Fleet Manager. * Coordinate procurement and logistics of spares, stores, and services through the assigned Technical Officer/Purchaser, ensuring timely and cost-effective supply chain support to vessels. * Ensure statutory and class survey compliance, maintaining awareness of due dates for certificates, surveys, and dry-dockings, and ensuring required work is planned and completed. * Close coordination with terminals and commercial operators to maintain schedule integrity and minimize service disruption. * Support incident response and investigations, performing root-cause analysis and implementing preventive measures to improve fleet safety and reliability. * Represent the company and owners’ interests in vetting inspections, third-party audits, and pre-purchase or pre-takeover inspections as required. * Provide clear and regular reporting to owners and the Fleet Manager on vessel condition, performance, incidents, and ongoing projects. * Work closely with the Operations and QHSE Managers, aligning technical, operational, and safety priorities for the assigned ships. * Maintain strong relationships with Masters and Chief Engineers, providing guidance, technical advice, and leadership to ensure onboard teams meet company expectations. REMUNERATION PACKAGE ON OFFER Competitive Salary and benefits package

Job Title: Legionella Risk Assessor Location: Watford, Greater London Salary/Benefits: £26k - £40k DOE + Training & Benefits This well-established Water Hygiene company is searching for a dedicated and loyal Legionella Risk Assessor, ideally with good access to London and the South East of England. Candidates will need the City and Guilds (WMSoc) in Legionella Risk Assessing and will be confident in performing risk assessments on cooling towers and process water systems. We are seeking someone who will need to hit the ground running, undertaking in-depth risk assessment reports with schematic drawings and providing technical advice to clients. This company can offer fuel cards, company van and phone, competitive salaries and reward schemes. Applicants will be considered from: Watford, Slough, St Albans, Maidenhead, Bracknell, Aylesbury, Reading, Wallingford, Didcot, Oxford, Abingdon, Wantage, Luton, Dunstable, Hounslow, Southall, Harrow, Wembley, High Wycombe, Kingston upon Thames, Woking, Camberley, Basingstoke, Aldershot, Farnham, Guildford, Beaconsfield, Cookham, Hazlemere. Experience / Qualifications: • Experience working as a Legionella Risk Assessor, • Well-rounded experience working on domestic, public sector and industrial sites, • Proficient in IT (i.e. Microsoft Word), • Must hold experience with Cooling Towers and process water systems, • Flexible to travel in line with company requirements, • Fully conversant in ACOP L8 and HSG 274 guidelines, • Must hold the City and Guilds (WMSoc) in Legionella Risk Assessing The Role: • Conducting legionella risk assessments on domestic hot and cold, cooling tower and closed systems, • Producing detailed risk assessment reports and schematic drawings, • Tailoring technical advice to clients, • Achieving personal targets and meeting deadlines, • Ad-hoc water sampling and temperature monitoring, • Reviewing and interpreting sample results, • Working on domestic hot and cold systems Alternative job titles: Water Risk Assessor, Legionella Consultant, Water Hygiene Risk Assessor, Water Hygiene Consultant, Environmental Consultant, Water Treatment Engineer, L8 Operative, Water Hygiene Technician, L8 risk assessor. Future Select are recruiting in the Water Treatment/Hygiene industry; we work with the best clients & candidates and supply the majority of permanent jobs in the market. We would be interested in speaking to candidates with experience in any disciplines from Risk Assessors, Service Engineers, Account Managers and Business Development/Operational Managers through to Director level. We are inundated with applications, we will endeavour to get back in touch, however if you have applied to Future Select and you have not heard from us after a week, on this occasion, you will not have been successful. Your details will be saved on our system and you will be contacted in the future if a vacancy matches your skills. Future Select Copyright 2026

Your new company Based in Richmond, a few minutes' walk from the station, their 60 strong team have developed a well-earned reputation for their work delivering civil and environmental engineering projects to meet the growing demands of our changing world. Currently undergoing a phase of growth, they work with a wide range of clients across the UK in both the public and private sectors, delivering civil and environmental projects with a heavy focus on sustainable development. Your new role Owing to a healthy pipeline of exciting highway drainage, flood alleviation and SuDS design projects, they are now looking for drainage design engineer in the water sector to assist with project delivery and management ensuring new commissions are delivered to the highest possible standard In short you will be able to • Help to ensure projects are delivered on time and to budget, • Work on the design and modelling of drainage designs, SuDS designs and hydraulic models, • Produce of drawings (AutoCAD) and (Civil3D), • Conduct site evaluations to assess existing drainage infrastructure and identify areas for improvement. About you We are seeking Drainage Design Engineer with the skillset to thrive in a small and dynamic team. You should demonstrate • A keen eye for detail is essential for identifying potential issues and ensuring plans are accurate., • Effective communication is crucial for collaborating with colleagues, clients, and contractors. Must be able to clearly explain technical concepts to both technical and non-technical audiences., • While collaboration is important, drainage engineers also need to be able to work independently and take ownership of their tasks., • Experience in highways drainage or in design of Sustainable Drainage Systems (SuDS), • Strong CAD skills (and Civils 3D experience preferred), • Experience in Micro Drainage or similar, • Chartership with the relevant body or working towards chartership Why apply? • They have proudly announced they are a gender balanced team, • Fully funded professional institution membership and professional development, • A growing international and welcoming team

MEP Coordinator High End Interiors Projects £50k - £60k (Dependent on Experience) Additional Travel Allowance Pension Scheme Employee Assistance Programme Cycle to Work Scheme Financial Planning Management Long service holiday loyalty days The Company My client is a leading Main / Principle Interiors Contractor, providing products and services to create high end luxury interior environments in the High End Residential, Leading Hotels and Restaurants in the London and the UK. The Building Services Engineer / Technical Services Engineer Role : Due to an exciting pipeline of new projects, they are looking to recruit an MEP Coordinator / Assistant MEP Building Services Manager as they prepare for what is expected to be a very busy period of growth over the coming years. This is a fantastic opportunity for someone to join a team of experienced MEP Building Services Managers, who will provide support, training and development, with the aim to progress you into a more senior level Building Services Manager. All the time working on complex refurbishment and interior fit-out projects, to an exclusive clientele, throughout Central London. The Building Services Engineer will provide support and assistance in the following areas: Provide Technical Services support across all aspects of the project(s) from Pre-tender through to Testing, Commissioning, Demonstrations, Handover and Practical Completion. Lead by example and take full ownership of the Technical Services (MEP) packages whilst reporting to the Contracts Manager, who has overall responsibility for the project(s). Lead in the production of MEP project programmes (Design, Pre-construction, Drawing Production, Procurement, Installation, Testing & Commissioning, Handover and Practical Completion). Maintain relationships with our MEP supply chain including contractors and suppliers regularly reviewing their performance on site and action, as necessary. Managing MEP sub-contractor works on site ensuring works are completed safely in line with the programme and to the required high quality that EES expects, Ensure Company Procedures, 14001 Environmental, 9001 Quality and Statutory H&S Regulations are maintained, The Successful Assistant MEP Building Services Coordinator Candidates should ideally come from a MEP Building Services Contractor, Main Contractor or Specialist Fit-Out Contractor background. Educated to HNC level or equivalent, in either Mechanical or Electrical engineering and with a solid, stable career to date. A minimum of 5 years related experience. A good understanding or working knowledge of software packages such as AutoCAD The desire to progress as an individual within the building services environment. Outgoing, motivated with a team player attitude. TPBN1_UKTJ

Contract Senior Civil Engineer (Data Centres) £40-£45 per hour Fully Remote Competitive Hourly Rate (Outside IR35) Long-Term Contract (Circa 2 Years) A leading engineering consultancy is looking to appoint an experienced Senior Civil Engineer on a contract basis to support a growing portfolio of data centre projects. This is a fully remote role, offering long-term stability and the opportunity to work on technically complex, large-scale developments. The Role You’ll play a key role in delivering civil engineering design across multiple data centre schemes, with a strong focus on drainage, levels and environmental compliance. Responsibilities include: Flood Risk Assessments (FRA) Drainage design (surface & foul water) Levels strategy and earthworks coordination Supporting the BREEAM assessment (POL 03 – Surface Water Run-off) Coordinating services and infrastructure layouts on drawings Working closely with multidisciplinary teams to deliver compliant, buildable designs Software MicroDrainage / InfoDrainage (essential) Civils 3D (beneficial not essential) AutoCAD About You Strong experience within UK civil engineering consultancy Proven background delivering infrastructure design on complex developments Experience producing Flood Risk Assessments and drainage strategies Understanding of BREEAM, particularly POL 03, is highly desirable Comfortable working remotely and managing your own workload Why Apply? Fully remote working Outside IR35 Long-term pipeline of secured work (circa 2 years) Opportunity to work on high-profile data centre projects If you’re a Senior Civil Engineer with strong drainage experience and looking for a long-term contract, get in touch to discuss further

Contract Senior Electronics / Firmware Engineer – Sensor Expertise Rate: £400–£425 per day + VAT IR35 Status: Outside IR35 Location: Greater London (3-4 days on site per week min) Contract Length: 3–6 months, with potential extension We’re working with an innovative technology business at the forefront of advanced sensing solutions, seeking a Senior Electronics / Firmware Engineer to support the development of next-generation products. This is an opportunity to join a highly collaborative, multidisciplinary team delivering cutting-edge solutions with real-world impact. In this role, you’ll take ownership of sensor characterisation and optimisation, with a particular focus on humidity and temperature sensing technologies. You’ll play a key part in refining performance, reliability, and integration within sophisticated systems, contributing directly to product development from concept through to validation. This is a hands-on engineering role suited to someone who enjoys solving complex technical challenges and working closely with hardware, software, and mechanical engineers in a fast-paced R&D environment. Key Responsibilities Characterise, test, and optimise sensor performance, particularly metal oxide and electrochemical sensors Design, develop, and iterate electronic circuits and PCB layouts Support firmware development for hardware interfacing and system integration Collaborate cross-functionally to ensure seamless integration across electronics, firmware, and mechanical components Contribute to prototyping, validation, and performance tuning of advanced sensing systems Core Skills & Experience Strong background in electronic engineering, including PCB design and development Experience working with electrochemical or metal oxide sensors Solid embedded firmware capability (not necessarily specialist level), including: Hardware interfacing Communication protocols (e.g. LoRaWAN or similar) Proven experience taking products from development through to testing or deployment Highly Desirable Experience working with volatile organic compounds (VOCs) Knowledge of air sampling systems or environmental sensing Background in healthcare, life sciences, or medical device development Why Apply? Work on cutting-edge sensing technologies with meaningful real-world applications Join a highly skilled, multidisciplinary team in a collaborative environment Opportunity to make a tangible impact on product performance and innovation Flexible working arrangements and a strong likelihood of contract extension

My Client, a market leading Civil Engineering Consultancy with offices based across the South East, is searching for a Flood Risk and Drainage Engineer to join their team in London. This exciting role will offer candidates the opportunity to join an innovative team who specialise in civil and structural engineering for both public and private sector clients. With a wide portfolio of projects you will have the chance to design flood risk and drainage solutions for Residential, Commercial, Industrial, Retail, Healthcare, Renewables and Education Sectors for both public and private sector clients. As a Flood Risk and Drainage Engineer you will be required to complete varied technical work including; -Flood Risk Assessments for flood zone 1,2 and 3. -Flood Risk Mapping using ArcGIS. -SuDS Strategies. -Drainage, attenuation and SuDS design using infodrainage and causeway flow. -Design of sustainable drainage solutions for residential, commercial, healthcare, retail and educational projects. -Client meetings to discuss project progress, on occasion. -Exposure to hydraulic modelling. -Support team members with designs. This role offers a competitive salary, friendly team, substantial benefits package, company benefits, hybrid working from London and career progression. It is essential that applicants have a strong BSc and/or MSc in Civil Engineering, Environmental Management, Hydrology or Environmental Engineering and experience working for a UK based Consultancy completing flood risk assessments, drainage strategies and design using infodrainage or causeway or AutoCAD. It is essential for applicants to have hydraulic modelling experience using flood modeller or Tuflow. If this role is of interest to you or you would like to discuss other opportunities, please contact Jordanna Morris at Aztrum

Think Recruitment are currently looking to recruit a professionally qualified Senior / Principal Civil Engineer to join our clients London team. In this role you will be part of a dynamic team and have the opportunity to work on a wide range of projects, from city-wide masterplans through to parks and public realm projects including educational, arts and leisure, commercial and residential developments. With previous design experience and the ability to think through complex problems and embrace creative and appropriate solutions, the successful candidate will have strong analysis, engineering design and communication skills, along with the following core experience: Technical design of key infrastructure systems including water, flood mitigation, drainage, highways and utilities. Digital design and systems optimisation tools such as parametric earth movement modelling and information systems and 3D modelling Site analysis including hydrology, utilities, ground condition and environmental conditions. Defining briefs, developing strategies and undertaking feasibility studies in response to client needs.With a sound technical base with good knowledge of relevant infrastructure standards, previous knowledge of Autodesk Civil 3D, AutoCAD, InfoDrainage (or similar) etc would be beneficial along with an understanding of sustainable development. Joining a team 70+ talented and committed civil and structural engineers, architects, designers, construction innovation consultants, strategists and sustainability experts, you will have the opportunity to develop and grow your skills in a variety of areas, while the overall package includes great benefits such as flexible working including 9-day fortnight scheme, private medical insurance, supported route to chartership, EAP, life assurance, comprehensive pension scheme plus much more, so for full details on this exciting opportunity please call or apply today

Job Title: Electrical Engineer Location: Greater London Salary: Depending on experince. Role and Responsibilities • Design, develop and maintain mechanical systems, components and equipment for commercial, industrial or construction projects., • Produce detailed engineering drawings, specifications and technical documentation using CAD software., • Carry out calculations, simulations and performance analysis to ensure systems meet operational requirements., • Collaborate with project managers, architects, electrical engineers and contractors throughout project lifecycles., • Prepare mechanical designs in line with relevant UK building regulations, industry standards and health & safety legislation., • Conduct feasibility studies, site inspections and technical assessments for new and existing installations., • Support the delivery of HVAC, piping, plumbing, ventilation and mechanical plant systems where required., • Develop cost-effective engineering solutions while maintaining quality, safety and efficiency standards., • Assist in preparing project programmes, budgets and procurement specifications for mechanical packages., • Review and approve technical submittals, supplier quotations and contractor proposals., • Liaise with clients and stakeholders to understand project requirements and provide technical guidance., • Monitor installation works on-site to ensure compliance with drawings, specifications and programme deadlines., • Troubleshoot mechanical issues and provide practical solutions to minimise downtime and project delays., • Conduct testing, commissioning and validation of mechanical systems and equipment., • Prepare risk assessments, method statements and maintenance procedures where necessary., • Ensure all mechanical systems comply with sustainability, energy efficiency and environmental standards., • Support preventative maintenance strategies and asset management planning., • Maintain accurate project records, reports and engineering documentation., • Participate in design reviews, technical meetings and progress updates with internal and external teams., • Assist junior engineers, apprentices or technicians with technical support and mentoring., • Stay up to date with new technologies, engineering trends and industry best practices., • Work closely with procurement teams to source suitable materials, equipment and suppliers., • Ensure quality assurance procedures are followed throughout design and installation stages., • Contribute to continuous improvement initiatives across engineering and operational processes., • Deliver projects within agreed timelines, budgets and performance expectations. If you are interested in the role contact me

PSR Solutions is recruiting for a Section Engineer to work on projects in London, with offices being in East and West London. Please see more info below! We are currently seeking an experienced Section Engineer to support the delivery of major water infrastructure projects across London. This is a fantastic opportunity to join a well-established contractor working on complex and high-value civil engineering schemes within the water sector. The Role As Section Engineer, you will be responsible for supporting the successful delivery of projects from site level, ensuring works are completed safely, efficiently, and to programme. The role will involve close coordination with site teams, subcontractors, and project stakeholders, with a strong focus on self-delivery operations. Key Responsibilities Managing day-to-day engineering activities on site Supporting the delivery of water and utilities infrastructure projects Coordinating self-delivery works and site operations Ensuring compliance with health, safety, environmental, and quality standards Producing and reviewing technical documentation including RAMS and ITPs Carrying out setting out, surveying, and quality assurance checks Monitoring progress against programme and reporting updates to management Liaising with subcontractors, suppliers, and project stakeholders Assisting with planning and problem-solving on site Requirements Proven experience working as a Section Engineer within civil engineering Previous water sector/project exposure is essential Strong self-delivery experience is required Experience working on utilities, infrastructure, or heavy civils projects Degree/HNC/HND in Civil Engineering or a related discipline Valid CSCS card Strong communication and organisational skills Ability to work effectively in fast-paced project environments What's on Offer Opportunity to work on major infrastructure projects across London Long-term career development and progression opportunities Competitive salary and benefits package Collaborative and supportive team environmentIf you are a motivated Section Engineer with water experience and a strong self-delivery background, we would be keen to speak with you. Contact Dan Confrey at PSR Solutions for more information

Senior Structural Engineer Central London £55k-£60k plus benefits Come join this award winning, independent engineering and environmental consultancy who operate across the UK. Their London office has an opening for a talented senior structural engineer who takes pride in their work and knows what is required to successfully deliver projects. You will play a key role in the delivery of a diverse portfolio of building structures projects, including residential, commercial, and retail developments, as well as more technically challenging schemes such as data centres and specialist infrastructure. The successful candidate will take responsibility for leading projects from concept through to completion, ensuring high-quality, efficient, and innovative design solutions. You will be expected to provide technical leadership, mentor junior engineers and technicians, and contribute to the continued growth and success of the structural engineering team. Key responsibilities will include: preparing and reviewing structural calculations, drawings, and specifications; managing design processes; coordinating with architects, clients, and other disciplines; ensuring all work complies with relevant design standards and codes. The role will involve both hands-on technical design and active participation in project management, client liaison, and quality assurance. Applicants should hold a degree in Civil or Structural Engineering and be chartered or working towards chartership with the ICE or IStructE. Strong technical knowledge across a range of materials-including steel, concrete, timber, and masonry-is essential, along with proficiency in industry-standard analysis and design software. Excellent communication, problem-solving, and team leadership skills are key to success in this position. This is an outstanding opportunity for a talented Senior Structural Engineer to take the next step in their career, contributing to high-profile projects and working within a forward-thinking, collaborative environment that supports professional development and innovation. Send your CV to Graham Ventham at Conrad Consulting to be considered and he will call you for a confidential chat

Job Title: Contracts Manager Location: London Region Sector: Groundworks & Reinforced Concrete (Infrastructure) Employment Type: Permanent Rate: £550 – £650 per day Role Overview An experienced Contracts Manager from an engineering background is required to oversee the delivery of groundworks and reinforced concrete packages on major infrastructure projects across the London region. This is a permanent, senior role suited to an individual who has progressed from an engineering pathway and possesses strong technical, commercial and leadership capability. The role requires a technically strong Contracts Manager who understands construction methodology, sequencing and design coordination, and who can manage complex civil engineering works from pre‑construction through to completion. The Contracts Manager will be responsible for the successful delivery of multiple projects, ensuring works are completed safely, on programme and within commercial targets. Key Responsibilities Take full responsibility for the management and delivery of groundworks and reinforced concrete packages across multiple infrastructure projects, applying strong engineering knowledge to drive buildability, sequencing and efficient delivery. Oversee and support site teams including Project Managers, Site Managers, Engineers and subcontractors, ensuring works are delivered in line with engineering requirements, programme, specifications and contractual obligations. Lead project planning, technical sequencing and construction methodology, ensuring engineering solutions are practical, safe and cost‑effective, particularly in constrained and complex environments. Ensure the highest standards of health, safety, environmental and quality compliance at all times. Review and approve engineering‑led risk assessments, method statements, temporary works designs and construction methodologies. Work closely with commercial teams to manage budgets, variations, valuations and final accounts, bringing strong technical input to support commercial decision‑making and change management. Liaise with clients, engineers, designers and key stakeholders, providing technical leadership and resolving engineering, design or programme challenges as they arise. Chair regular progress and technical meetings, producing clear and accurate reports for senior management covering programme, cost, risk and overall project performance. Support the development of engineering teams, systems and processes to drive continuous improvement, consistency and operational excellence across the business. Required Experience Proven experience working as a Contracts Manager on infrastructure projects involving groundworks and reinforced concrete. A strong engineering background, with previous experience as a Site Engineer, Senior Engineer, Project Engineer or technically led Project Manager prior to moving into contracts management. Excellent technical knowledge of RC structures, foundations, heavy civils, enabling works and temporary works. Demonstrated experience managing multiple projects simultaneously across the London region. Strong leadership, communication and decision‑making skills with the ability to manage multidisciplinary teams. Excellent understanding of health and safety management on major infrastructure schemes. Commercially astute with experience managing substantial project budgets, programmes and change. Qualifications Relevant civil engineering or construction qualification preferred. CSCS Card required. SMSTS required. Temporary Works experience or qualification advantageous

Hydraulic/Flood Modeller London (hybrid working available) An established, global Engineering and Environmental Consultancy is looking to strengthen its growing flood risk and water team in London with the addition of a Flood Modeller at Consultant or Engineer level. With a strong pipeline of secured work across both public and private sector clients, this is a great opportunity to join a well-regarded team delivering meaningful projects across the UK. This role sits within a collaborative and well-established water team, supporting the delivery of flood risk, drainage and wider water engineering projects. You will be involved across the project lifecycle, from early-stage optioneering through to detailed design, contributing to schemes that range from development-led work through to larger infrastructure and environmental projects. From a technical perspective, you will support the development and application of hydraulic and hydrological models, helping to assess flood risk and inform design solutions. This will include building and running models, interpreting outputs and contributing to clear, well-structured technical reports. You will also assist in the preparation of Flood Risk Assessments and drainage strategies, with exposure to SuDS and wider sustainable water management approaches. Working closely with more senior engineers and multidisciplinary teams, you will gain broad project exposure while developing your own technical capability. The wider team operates across a "one water" approach, meaning you will also have the opportunity to get involved in projects that consider the interaction between flood risk, drainage and wastewater systems. The role offers a good balance of technical work and project involvement. You will support delivery across multiple projects, contribute to client and stakeholder discussions, and gradually take on more responsibility as your experience grows, including managing smaller packages of work. To be considered, you should hold a degree in a relevant discipline and have some experience within flood risk, hydraulic modelling or water engineering. You will ideally have exposure to software such as Flood Modeller, TUFLOW or InfoWorks ICM, along with an understanding of UK hydrological methods such as FEH and the planning and regulatory environment. Experience with GIS tools such as ArcGIS and an appreciation of drainage design principles would also be beneficial. This is a strong opportunity for someone looking to continue developing their career within a supportive Consultancy, offering structured progression, a collaborative team environment and a clear pathway toward Senior level. For more information about this role, please contact Sam at Calibre or click apply. Calibre Search promote equality in the workplace and we welcome applications from all suitably skilled or qualified candidates regardless of their sex, race, disability, religion/beliefs, sexual orientation or age. We act as both an employment agency and employment business

Refrigeration Engineer London £60,000 per annum A refrigeration specialist focused on delivering low carbon climate control solutions for commercial and industrial environments. Over 20 years of experience, this company provide design, installation, and maintenance of refrigeration systems, with a strong emphasis on sustainable technologies such as CO2 and other natural refrigerants. Its in-house engineering team delivers bespoke HVAC solutions tailored to sectors ranging from offices and retail to data centres and healthcare, combining system performance with reduced energy consumption and environmental impact, while also offering ongoing maintenance and lifecycle support Key Responsibilities: Work as an individual, diagnosing and repairing a range of refrigeration systems. Be part of a regional service team. Communicate directly with our customers whilst on site. Cover standby duties on a rota. Package: £52,000 per annum Overtime, door to door & on-call pay 28 days annual leave Pension scheme Continuous training Opportunities What You'll Need: Strong understanding of Commercial refrigeration Experience with CO2 F-Gas certification (C&G 2079) Excellent communication and time management A strong work ethic, with Health & Safety awareness Interested in hearing more? Call Peter Caulfield on 023 9285 2310 or Email WR HVAC | M&E are #1 recruitment partner for HVAC jobs. Our customers include a range of large and small M&E companies, manufacturers and suppliers of heating, ventilation, air conditioning and refrigeration equipment. We recruit UK wide for sales, management and technical jobs. WR is acting as an Employment Agency in relation to this vacancy. TPBN1_UKTJ

Refrigeration Engineer London £60,000 per annum A refrigeration specialist focused on delivering low carbon climate control solutions for commercial and industrial environments. Over 20 years of experience, this company provide design, installation, and maintenance of refrigeration systems, with a strong emphasis on sustainable technologies such as CO₂ and other natural refrigerants. Its in-house engineering team delivers bespoke HVAC solutions tailored to sectors ranging from offices and retail to data centres and healthcare, combining system performance with reduced energy consumption and environmental impact, while also offering ongoing maintenance and lifecycle support Key Responsibilities: Work as an individual, diagnosing and repairing a range of refrigeration systems. Be part of a regional service team. Communicate directly with our customers whilst on site. Cover standby duties on a rota. Package: £52,000 per annum Overtime, door to door & on-call pay 28 days annual leave Pension scheme Continuous training Opportunities What You'll Need: Strong understanding of Commercial refrigeration Experience with CO₂ F-Gas certification (C&G 2079) Excellent communication and time management A strong work ethic, with Health & Safety awareness Interested in hearing more? Call Peter Caulfield on (phone number removed) or Email (url removed) WR HVAC | M&E are #1 recruitment partner for HVAC jobs. Our customers include a range of large and small M&E companies, manufacturers and suppliers of heating, ventilation, air conditioning and refrigeration equipment. We recruit UK wide for sales, management and technical jobs. WR is acting as an Employment Agency in relation to this vacancy

Job Title: Highways Technology Engineer Location: Bristol Salary: Up to £45k (depending on experience) This is an exciting opportunity to join a well-established engineering services provider with a strong reputation for quality, safety, and reliability. As the business continues to grow, we are seeking a skilled and motivated Technology Engineer to join the team. If you’re passionate about delivering high-quality technical solutions and enjoy working on diverse projects across the UK, we want to hear from you! The Role: Commissioning and installation of infrastructure technology Fault-finding, repairs, and rectification Compliance with Quality, Health, Safety, Lean, Training and Environmental standards About You: Background in Rail or Highways Independent working abilities Efficient response to fault diagnostics Strong punctuality and reliability Clean UK driving license Excellent organisation and communication skills Proficient in MS Office Suite What We Offer: Competitive salary (based on experience) Overtime and weekend work opportunities Company vehicle and fuel card 25 days holiday + bank holidays Employer pension contributions Funded training and career development opportunities Subsidised private healthcare Please note we cannot offer sponsorship for this opportunity. If interested please send over an updated CV

A highly respected engineering and technology organisation is seeking a Systems Engineer to support the delivery of complex, high-profile programmes within a secure and regulated environment. This is an excellent opportunity to join a multidisciplinary engineering team working on advanced integrated systems that support critical operational capabilities both in the UK and internationally. The Position The successful candidate will play a key role in delivering systems engineering activities across the full project lifecycle, from early requirements capture through to integration, validation and final delivery. Working closely with cross-functional engineering teams, you will help ensure technical solutions are delivered to the highest standards of quality, compliance and performance. Key Responsibilities Deliver systems engineering activities across multiple project phases Produce, review and maintain technical documentation and specifications Support major design reviews and engineering assurance activities Work with internal teams and external suppliers to ensure technical alignment and delivery Review technical requirements and provide engineering input throughout programme execution Collaborate with software, hardware, safety, verification and integration teams Contribute to technical planning, risk management and project estimation activities Ensure solutions are delivered in line with programme schedules, quality standards and customer expectations Skills & Experience Required Degree qualified in Systems Engineering, Electrical Engineering, Software Engineering or a similar discipline Previous experience within defence, aerospace, maritime or another regulated engineering sector Strong understanding of systems engineering principles including requirements management, integration and verification Experience with control systems, PLC/SCADA or operational technology environments Familiarity with model-based engineering tools such as Enterprise Architect Experience using requirements management tools such as DOORS Strong communication and stakeholder management skills Understanding of safety-critical or environmentally regulated systems Desirable Experience Exposure to verification and validation activities including EMC or environmental testing INCOSE accreditation or similar professional recognition Additional Information Due to the nature of the projects involved, applicants must be UK Citizens and eligible to obtain UK Security Clearance. Benefits Salary: £65,000 - £72,000 Performance-related bonus scheme Private healthcare Life assurance Hybrid and flexible working arrangements Compressed working pattern with additional time off Holiday buy/sell scheme Professional development and training support Relocation assistance may be available

Date Posted: 2026-01-21 Country: United Kingdom Location: 19 Schooner Park, Crossways Business Park, DA2 6NW,Dartford, Kent Escalator Service Engineer - London (Talent Pool) OTIS has recently secured a major long-term service project with London Underground , and we are building a talent pool of experienced Escalator Service Engineers to support this exciting new programme of work. As part of this project, you'll carry out routine and reactive maintenance on escalators across the LU network - helping keep millions of passengers moving safely and efficiently every day. What you'll be doing Servicing, maintaining, and fault-finding on a variety of escalator equipment across the network Reducing downtime through proactive maintenance Working with a wide range of modern and legacy technologies Collaborating with a close-knit engineering team focused on safety and reliability What's on offer Competitive salary and benefits package, including overtime opportunities The chance to work on one of the UK's most high-profile rail infrastructure environments Full OTIS training, professional development, and exposure to internal projects Long-term stability and progression within a global industry leader What we're looking for Qualified Escalator or Lift Engineers with NVQ Level 3 or 4 in escalator service, repair, maintenance, or installation A full UK driving licence Flexibility to work a range of shifts, including nights Experience within a safety-critical environment is beneficial, though not essential Interested? Register your interest today, and a member of our recruitment team will contact you to discuss: salaries shift patterns working hours project details You don't need to meet every requirement to submit an expression of interest - if you're an experienced engineer looking for your next step, we'd love to hear from you. If you live in a city, chances are we will give you a lift or play a role in keeping you moving every day. Otis is the world's leading elevator and escalator manufacturing, installation, and service company. We move 2.4 billion people every day and maintain approximately 2.4 million customer units worldwide, the industry's largest Service portfolio. You may recognize our products in some of the world's most famous landmarks including the Eiffel Tower, Empire State Building, Burj Khalifa and the Petronas Twin Towers! We are 72,000 people strong, including engineers, digital technology experts, sales, and functional specialists, as well as factory and field technicians, all committed to meeting the diverse needs of our customers and passengers in more than 200 countries and territories worldwide. We are proud to be a diverse, global team with a proven legacy of innovation that continues to be the bedrock of a fast-moving, high-performance company. When you join Otis, you become part of an innovative global industry leader with a resilient business model. You'll belong to a diverse, trusted, and caring community where your contributions, and the skills and capabilities you'll gain working alongside the best and brightest, keep us connected and on the cutting edge. We provide opportunities, training, and resources, that build leadership and capabilities in Sales, Field, Engineering and Major Projects and our Employee Scholar Program is a notable point of pride, through which Otis sponsors colleagues to pursue degrees or certification programs. Today, our focus more than ever is on people. As a global, people-powered company, we put people - passengers, customers, and colleagues - at the center of everything we do. We are guided by our values that we call our Three Absolutes - prioritizing Safety, Ethics, Quality in all that we do. If you would like to learn more about environmental, social and governance (ESG) at Otis click here . TPBN1_UKTJ

As UBY UK Limited continues to grow and enjoy commercial success we are looking to expand our team in London. This is a new role for an ambitious and career focussed engineer with experience in the instrumentation and monitoring system sector. UBY is a Constructech subsidiary of the Bouygues Group which uses the best of technology and Data to provide simple and unique smart solutions that meet the environmental, health, safety, productivity and sustainability challenges of construction players and infrastructure managers. By deploying its specialized sensors, software and algorithms, UBY offers environmental, structural, productivity and occupational health and safety monitoring in the construction and operation phases. UBY positions itself as a Constructech expert and co-pilot for operations managers, to enable them to manage their projects with the right information, at the right time to make the right decisions. UBY is convinced that Technology is an ally for more secure and sustainable constructions. About the Role We are looking for a motivated Instrumentation & Monitoring Technician to support our growing activities across major environmental and infrastructure projects. Under the supervision of our I&M Project Manager, you will install, maintain, and decommission a range of environmental monitoring instruments used to assess ground conditions, water and air quality, structural behaviour, and other key environmental parameters. You will operate on various worksites across the region, particularly on large public works and environmental monitoring programmes. After receiving full training on our tools, systems, and digital platforms, you will be responsible for deploying our dedicated monitoring solutions on construction and infrastructure sites. This hands-on role is ideal for someone who enjoys field work, has strong practical and problem-solving skills, and is eager to work with modern environmental and IoT monitoring technologies. Responsibilities & Duties Office-based activities Prepare materials, equipment, and documentation required for environmental instrumentation installations. Review project drawings, specifications, and method statements prior to mobilisation. Site-based activities Install and uninstall environmental monitoring equipment—such as groundwater sensors, vibration and noise monitors, air quality devices, and settlement or movement sensors—according to specifications and safe working procedures. Install, configure, and commission data loggers, telemetry units, and remote monitoring solutions. Maintain accurate installation records, ITPs, and site reports. Supervise subcontractors when monitoring activities are outsourced. Take manual readings and perform verification checks on instruments. Provide technical support for environmental and structural monitoring systems during operation. Perform routine maintenance and installations, including work at height, in confined spaces, or during night shifts when required. Uphold strong health, safety, and quality standards during all site operations. Profile: Profile & Skills You will be a great fit if you have: Experience related to the installation or maintenance of environmental and/or monitoring instruments (e.g., groundwater sensors, vibration monitors, noise monitors, data loggers, telemetry systems, settlement devices, etc.). Experience working with or supervising drilling or instrumentation subcontractors (a plus). A practical, hands-on approach and confidence using electromechanical tools. Curiosity, attention to detail, and strong self-motivation. The ability to work effectively as part of a team in an international and multicultural environment. Interest in technology, IoT devices, sensors, and the digitalisation of environmental and construction monitoring. Good adaptability and problem-solving skills in field environments. Why UBY Group Our teams deploy technically innovative solutions for a diverse range of challenging projects throughout the UK, Europe, North America, Asia and Australia. Day in day out our teams deliver some of the most technically innovative and challenging projects across the UK and the world. With a strong corporate culture our values reflect how we operate with Respect, Commitment, Pioneering, Sharing. We offer competitive basic salaries coupled with generous company benefits including: 26 days annual leave, increasing to 30 days 2 paid volunteering days a year Pension scheme Life insurance Private medical insurance Generous share scheme BY Extra – opt into lifestyle benefits UBY is part of the Bouygues Group, a diverse global business which operates in the construction, engineering, energy, media and telecommunications markets. With annual sales of over €56,887 (December 2025) billion and operations in 80 countries, the financial strength of our group is a key differentiator in these challenging economic times. Be Yourself! Here at Bouygues Group we value the creativity and innovation that our diverse workforce brings, encouraging people from all backgrounds, particularly those from under represented communities to apply. By joining us, you will be inspired to bring your full self to the workplace, speak up and share your unique ideas. We are an equal opportunities employer and encourages applications from suitably qualified and eligible candidates regardless of gender, race, disability, age, sexual orientation, gender reassignment, religion or belief, marital status, or pregnancy and maternity

Shift Engineer – Data Centre / Critical Facilities (Electrical / Mechanical) London Continental Shift Pattern (Days & Nights) Full-Time | Permanent Competitive Salary + Shift Allowance + Overtime + Training & Development Overview We are recruiting a Shift Engineer / Data Centre Engineer / Critical Facilities Engineer to join a high-performing team within a mission-critical data centre environment in London. This is an excellent opportunity for engineers with experience in electrical, mechanical, HVAC, or building services systems to build a long-term career within a fast-growing and highly resilient sector. As part of a 24/7 operational team, you will play a key role in maintaining uptime, reliability, and operational performance across critical infrastructure and essential building services systems. Role Overview As a Shift Engineer, you will be responsible for the operation, monitoring, maintenance, and fault response of critical electrical and mechanical infrastructure within a live data centre environment. You will gain hands-on experience working with: • LV/MV electrical distribution systems - UPS (Uninterruptible Power Supply) systems - Standby generators and critical power infrastructure - HVAC and cooling systems including CRAC/CRAH units - Mechanical plant and associated building services systems - BMS / PMS / CMS monitoring platforms This is a safety-critical position requiring strong technical ability, attention to detail, and the ability to respond effectively to alarms, faults, and operational incidents. Key Responsibilities Operations & System Management • Operate and monitor critical electrical and mechanical infrastructure - Carry out HV/LV switching operations in accordance with Safe Systems of Work (SSOW) - Monitor site performance using BMS, PMS, and CMS systems - Respond to alarms and faults, ensuring rapid diagnosis and resolution - Support operational resilience and uptime across all critical systems Maintenance & Fault Finding • Deliver Planned Preventative Maintenance (PPM) and reactive maintenance activities - Carry out fault finding, diagnostics, and repairs across M&E systems - Assist with continuous improvement and reliability initiatives - Support maintenance planning and engineering best practice Compliance & Contractor Management • Supervise subcontractors and specialist service providers on site - Ensure compliance with Health, Safety, Environmental & Quality (HSEQ) standards - Maintain accurate technical documentation, maintenance records, and incident reports - Follow statutory regulations, site procedures, and operational compliance standards Skills & Experience Essential • Engineering apprenticeship, NVQ, City & Guilds, or equivalent technical qualification - Experience within building services, facilities management, industrial, or critical environments, • Strong working knowledge of:, • Electrical systems (LV/MV) - Mechanical plant and HVAC systems, • Proven fault finding and problem-solving capability - Ability to work effectively within a shift-based 24/7 operational environment Desirable • Previous experience within data centres or mission-critical facilities - HV/LV Authorised Person (AP) status, or working towards certification - Knowledge of UPS systems, standby generators, and critical power systems - Relevant industry certifications such as NCC, REC, or equivalent What’s on Offer • Competitive salary with shift allowance and overtime opportunities, • Structured career progression into roles including:, • Senior Engineer - Authorised Person (AP) - Data Centre Specialist - Critical Facilities Supervisor, • Ongoing technical training and professional development - Opportunity to work within a recession-resilient, high-demand industry - Exposure to advanced mission-critical infrastructure and technologies - Supportive, safety-first, and high-performance team culture Why Join Us? • Be part of a growing and future-focused critical facilities sector - Work on advanced electrical and mechanical systems within a live data centre environment - Develop specialist technical skills in critical infrastructure and operations - Join a collaborative engineering team focused on safety, reliability, and operational excellence

Are you ready to take your career to the next level with a cutting-edge company specializing in high-impact digital signage? Our client is at the forefront of creating exceptional visual experiences across retail, hospitality, corporate spaces, and stadium environments. From eye-catching LED walls to engaging interactive displays, they are setting the standard for innovative solutions. About the Role As an AV Engineer, you'll play a crucial role in delivering seamless on-site installations across the UK and globally. You'll collaborate with dynamic Operations, Technical, and Project teams to execute projects with precision and meet service level agreements (SLAs). You’ll also have the opportunity to nurture the next generation of talent by supporting and mentoring Trainee AV Engineers, all while representing our brand with professionalism on-site. Key Responsibilities Install state-of-the-art AV solutions including screens, projectors, and LED displays. Ensure every project meets strict SLAs and uncompromising quality standards. Provide guidance and mentorship to Trainee AV Engineers. Create detailed installation reports to document your work with photos and insights. Uphold the highest levels of professionalism and Health, Safety, and Environmental (HSE) compliance on-site. Embrace travel opportunities across the UK and internationally as needed. What You’ll Bring Proven experience in a similar AV engineering role. In-depth knowledge of AV systems. Familiarity with digital signage, networking, and IP technologies. A valid UK driving licence to support your travel requirements. Why You Should Apply If you are hands-on, technically adept, and passionate about working on AV projects that make a difference, this is the opportunity for you! Join us and contribute to creating standout solutions that captivate audiences and elevate brand experiences. Take the leap and transform your career with us today

Role Overview Would you like to join a truly international, talent driven company that values Safety, Ethics, Quality, Innovation and Employee Opportunity? Otis are growing and we're looking for a repairs engineer for London.Your priority is to ensure the safety of passengers and technical stakeholders by safely maintaining a portfolio of elevator and escalator units. On a typical day you will: Carry out various repairs of mainly Otis equipment but other equipment as well. Work across the London area managing the portfolio of elevators within it Respond proactively and quickly to anything else found on the lifts being worked on. Carry out both minor and major repairs to achieve continual operation. Liaise directly with the customer while on site to build a good working relationship. What's In it For Me: A highly competitive salary. Exposure to a wide range of technical equipment. Work Monday -Friday 0800-1700 on site. What you will need to be successful: Hold a NVQ 3 or equivalent within lift service, repair and or maintenance. Hold a valid drivers license You have at least 5 years of experience in the elevator sector. You have good skills in electricity and electrical engineering You are a committed professional, with safety as your priority You are comfortable communicating to others You are curious, adaptable, and you know how to work alone or in a team You are comfortable using electronic and digital tools. We will train you intensively in the areas of technology, processes & soft skills and you can exchange ideas with experienced colleagues at any time. You will receive modern and high-quality work clothes, your own tools, an iPhone and a company car. The health and safety of our employees is our top priority. We promote this through regular training on the subject of occupational health and safety as well as through an employee support program. Apply today to join us and build what's next!. If you live in a city, chances are we will give you a lift or play a role in keeping you moving every day. Otis is the world's leading elevator and escalator manufacturing, installation, and service company. We move 2.4 billion people every day and maintain approximately 2.4 million customer units worldwide, the industry's largest Service portfolio. You may recognize our products in some of the world's most famous landmarks including the Eiffel Tower, Empire State Building, Burj Khalifa and the Petronas Twin Towers! We are 72,000 people strong, including engineers, digital technology experts, sales, and functional specialists, as well as factory and field technicians, all committed to meeting the diverse needs of our customers and passengers in more than 200 countries and territories worldwide. We are proud to be a diverse, global team with a proven legacy of innovation that continues to be the bedrock of a fast-moving, high-performance company. When you join Otis, you become part of an innovative global industry leader with a resilient business model. You'll belong to a diverse, trusted, and caring community where your contributions, and the skills and capabilities you'll gain working alongside the best and brightest, keep us connected and on the cutting edge. We provide opportunities, training, and resources, that build leadership and capabilities in Sales, Field, Engineering and Major Projects and our Employee Scholar Program is a notable point of pride, through which Otis sponsors colleagues to pursue degrees or certification programs. Today, our focus more than ever is on people. As a global, people-powered company, we put people - passengers, customers, and colleagues - at the center of everything we do. We are guided by our values that we call our Three Absolutes - prioritizing Safety, Ethics, Quality in all that we do. If you would like to learn more about environmental, social and governance (ESG) at Otis click here . TPBN1_UKTJ

Role Overview Would you like to join a truly international, talent driven company that values Safety, Ethics, Quality, Innovation and Employee Opportunity? We are currently seeking an experienced escalator call out and repair engineer to join our Transport for London team, covering our London Underground escalator portfolio. Your priority is to ensure the safety of passengers and technical stakeholders by safely maintaining a portfolio of escalator units. On a typical day you will: Carry out breakdown and repair work on all escalators within the portfolio to achieve continual operation Work within London Underground network, managing the portfolio of escalator's within it Respond proactively and quickly to fix any breakdowns, aiming to achieve first time fix Liaise directly with the customer while on site to build a good working relationship What you will need to be successful You will be qualified to at least NVQ Level 3 in Escalator Engineering with significant experience in service and maintenance of escalators You must be an experienced escalator engineer with in-depth knowledge of a variety of different brands of equipment Hold a valid UK drivers license Flexibility is important and overtime maybe required You have good skills in mechanical and electrical engineering You are a committed professional, with safety as your priority You are comfortable communicating to others You are curious, adaptable, and you know how to work alone or in a team You are comfortable using electronic and digital tools. What's In it For Me / Benefits You will be offered fantastic salary and benefits. 4 on 4 off 12 hour shifts (7PM - 7AM) On top of a competitive basic salary, you will have the opportunity to supplement your earnings with Overtime Benefits which include pension, Life Assurance, Paid Maternity, Paternity and access to the Otis Rewards Scheme Employee Scholarship Scheme - Otis will support you through your studies if you wish to gain further qualifications including Bachelors and Masters Degrees We will train you intensively in the areas of technology, processes & soft skills and you can exchange ideas with experienced colleagues at any time. You will receive modern and high-quality work clothes, your own tools with an iPhone The health and safety of our employees is our top priority. We promote this through regular training on the subject of occupational health and safety as well as through an employee support program. Apply today to join us and build what's next! If you live in a city, chances are we will give you a lift or play a role in keeping you moving every day. Otis is the world's leading elevator and escalator manufacturing, installation, and service company. We move 2.4 billion people every day and maintain approximately 2.4 million customer units worldwide, the industry's largest Service portfolio. You may recognize our products in some of the world's most famous landmarks including the Eiffel Tower, Empire State Building, Burj Khalifa and the Petronas Twin Towers! We are 72,000 people strong, including engineers, digital technology experts, sales, and functional specialists, as well as factory and field technicians, all committed to meeting the diverse needs of our customers and passengers in more than 200 countries and territories worldwide. We are proud to be a diverse, global team with a proven legacy of innovation that continues to be the bedrock of a fast-moving, high-performance company. When you join Otis, you become part of an innovative global industry leader with a resilient business model. You'll belong to a diverse, trusted, and caring community where your contributions, and the skills and capabilities you'll gain working alongside the best and brightest, keep us connected and on the cutting edge. We provide opportunities, training, and resources, that build leadership and capabilities in Sales, Field, Engineering and Major Projects and our Employee Scholar Program is a notable point of pride, through which Otis sponsors colleagues to pursue degrees or certification programs. Today, our focus more than ever is on people. As a global, people-powered company, we put people - passengers, customers, and colleagues - at the center of everything we do. We are guided by our values that we call our Three Absolutes - prioritizing Safety, Ethics, Quality in all that we do. If you would like to learn more about environmental, social and governance (ESG) at Otis click here . TPBN1_UKTJ

Multi Skilled Engineer - Hertfordshire Salary: £53,000 Shifts: 4 on 4 off days Commutable from; Harlow, Bishop's Stortford, Chelmsford, Cambridge, Stevenage, Hertford, Ware, Cheshunt, Enfield, Watford, St Albans, Luton, Hitchin, Braintree, Colchester Are you an electrically biased engineer or a multi skilled engineer looking for your next big move in manufacturing? We are partnering with a market leading FMCG company, working in a highly skilled, specialised engineering team. Key responsibilities: • Deliver planned preventative maintenance and respond efficiently to breakdowns in a timely manner to maximise equipment uptime * Carry out electrical and mechanical fault finding on a variety of equipment * Use system to record maintenance activity and planned maintenance and track KPI's * Work effectively with external contractors and production teams to ensure smooth running of the factory * Ensure full compliance with food safety, environmental and health and safety standards * Maintain a daily engineering report log * Ensure work orders are completed effectively and on time * Adhere to technical procedures and GMP Key skills & experience: • Time served or relevant level 3 engineering qualifications * 17th or 18th Edition electrical certification * Previous maintenance or engineering experience within the FMCG industry * Good communication and problem-solving skills * High attention to detail and health and safety standards * Flexibility to cover shifts if required. * Ability to work under pressure and meet tight deadlines * Experience in low and high care environments If this sounds like the right opportunity for you, please contact Alexa or Oli on (phone number removed). As you know over here at Zest we like to do things properly and always want to keep you, the candidate in the loop. Applying to this 'one of a kind' role you give Zest permission to hold your information. If you want to know more about how Zest look after your personal information please visit our privacy policy on the website (url removed)

Our client a well known building and civil engineering contractor are seeking a Drainage & Infrastructure Design Engineer to join their team. This role is responsible for supporting the project lead as part of a team of engineers and technicians producing design solutions for construction. You will have an ability to work effectively with a small team of graduate engineers and technicians and to deliver well considered, quality designs solutions in a manner which upholds the Visions and Values of the Company. You will be expected to use your Engineering, time / cost awareness and practical and technical knowledge to deliver design solutions that meet our contractual obligations, recognise current legislation, standards and codes of practice, prepare construction methodology and buildability, and ensure are of the right quality and are delivered to meet the proposed procurement and construction programmes. Responsibilities include, but are not limited to (and can vary from time to time based on business/project requirements): Production of designs that are right first time. Prepare designs in accordance with MDG Procedures Ensure that Health, Safety, Environmental and Sustainability considerations are adequately addressed. Be willing to follow instruction, but confident enough to ask for explanation if required Drive the solution and make a difference. Supervise graduate / design engineer(s) along with CAD technicians. Coordinate with other disciplines, either internally or externally depending on the project. Attend project meetings with both internal and external disciplines and clients and / or their representative. Provide support to the company in terms of relevant knowledge and experience. Rate- TBC Location- Hertfordshire

Building Services Engineer Location: Dartford, Kent (with travel throughout Southern England, primarily London and the Home Counties) Hours: 42.5 hours per week, Monday to Friday, 8:00 am – 5:00 pm Reporting to: Building Services Contract Manager Purpose of the Role The Building Services Engineer is responsible for delivering high-quality Planned Preventative Maintenance (PPM) and reactive repair services across client sites. The role ensures all works are completed safely, efficiently, and to the satisfaction of clients while maintaining compliance with statutory and company standards. Key Responsibilities Maintenance & Repairs Complete all planned and reactive maintenance tasks in line with schedules and service level agreements Diagnose faults and carry out effective repairs to building services systems Reporting & Documentation Produce clear, accurate reports, timesheets, and service documentation in a timely manner Identify defects, provide parts lists, and estimate repair timescales for the Building Services Contract Manager Emergency Response Attend reactive tasks and emergency callouts as directed by the helpdesk team Participate in the out-of-hours call-out rota as required Client & Professional Standards Maintain a professional image and approach at all times Build and maintain positive relationships with clients, colleagues, and subcontractors Health, Safety & Compliance Ensure a safe and healthy working environment in accordance with Health & Safety, Environmental Health, and COSHH regulations Comply with current legislation, industry standards, and company policies Accountabilities Adhere to company policies on Health & Safety, Environmental Management, and COSHH Maintain compliance with relevant legislation and company procedures Communicate effectively with supervisors, management, and specialist subcontractors to maintain service standards Report directly to the Building Services Contract Manager No direct line management or budgetary responsibility Skills & Requirements Technical & Professional Skills Strong background in mechanical building services maintenance Proven experience delivering PPM and reactive maintenance Proficient in fault finding and repair of control circuits Ability to work in accordance with statutory maintenance obligations Education & Qualifications Good basic education with strong written and spoken English and basic mathematical skills Recognised mechanical services qualification Health & Safety Sound understanding of Health & Safety regulations, environmental impacts, and risk assessments Experience working in compliance-led environments, including lone working procedures Communication & Teamwork Strong communication skills and ability to engage effectively at all levels Flexible, adaptable, and collaborative approach to teamwork Personal Attributes Resilient and effective under pressure Comfortable working at height Customer-focused with a commitment to delivering high levels of service Proactive, solution-oriented, and committed to continuous improvement Highly organised, self-motivated, and able to prioritise workloads to meet deadlines Takes ownership and responsibility for work delivery Additional Requirements Willingness to work overtime, including a minimum of two weekends per month Participation in an on-call rota Full, clean UK driving licence (essential) Desirable Experience & Skills Experience working with Building Management Systems (BMS) RAMS (Risk Assessment and Method Statement) training Ability and willingness to work outside core discipline when required IT literate, with experience using CAFM systems, Microsoft Office, and Project Membership of a relevant professional body This role offers a challenging and rewarding opportunity to work across multiple sites, delivering high standards of building services maintenance while developing professionally in a compliance-led environment.

Job Title: Lead Engineer - Join Our Winning Team at CBRE! Company Overview: CBRE is the world's leading real estate services firm, dedicated to meeting the commercial real estate needs of our clients globally. With over 70,000 employees operating in 48 countries, we are committed to transforming the workplace into a competitive advantage for our clients. Our Global Workplace Solutions (GWS) division is pioneering innovations in workplace strategies, offering a comprehensive range of services to corporate occupiers across various sectors, including office, retail, manufacturing, and data centres. Position Summary: Are you a skilled engineer with a passion for excellence in facility management? CBRE is seeking a Lead Engineer to join our dynamic team in London. In this pivotal role, you will leverage your expertise to ensure the optimal performance and maintenance of critical environments within commercial and retail settings. Key Responsibilities: * Effectively manage your time and delegate tasks to team members to enhance operational efficiency. * Control costs related to maintenance activities, ensuring alignment with budgetary guidelines. * Ensure all client services, including computer rooms and data networks, meet or exceed required service level agreements (SLAs). * Maintain and update plans for critical environments to ensure operational integrity. * Implement change control processes for business-critical areas. * Generate technical management reports as needed. * Provide emergency response standby/call-out support as required. * Oversee utilities management and environmentally sustainable practices. * Assist in technical audits related to critical environments. * Drive cost-effective procurement of engineering maintenance services. * Maintain accurate and retrievable engineering maintenance documentation. * Collaborate with the Facilities Management Team to address changes in critical environment requirements. * Plan and report on Statutory Compliance Maintenance and Testing. * Ensure all Planned Preventative Maintenance (PPM) activities are executed on schedule. * Regularly monitor and analyze environmental conditions, including the performance of critical equipment. * Work closely with the CBRE EHS specialist to ensure compliance with audit requirements. * Uphold CBRE Health & Safety procedures during maintenance activities, utilizing the permit to work system as necessary. * Escalate urgent issues to the Technical Services Manager promptly. Qualifications: * Recognized qualifications as an electrician (apprenticeship, HND, C&G). * Essential: 17th Edition Electrical Wiring Regulations certification. * Previous experience in managing data centres or critical environments is desirable. * Familiarity with emergency response protocols and utilities monitoring. * Excellent communication and facilitation skills across all levels. * Self-motivated, resourceful, and proactive in problem-solving. * Confident decision-maker with the ability to think critically. * Desirable: Understanding of water hygiene (L8) and experience with BMS Controls/HVAC. * Operational experience with UPS, Standby Power, and Critical Environment Cooling systems. Why CBRE? At CBRE, we invest in our employees' growth and well-being, offering competitive salaries, comprehensive benefits, and opportunities for professional development. Join a diverse and inclusive team that values innovation and collaboration. Ready to Elevate Your Career? If you are ready to make an impact and drive success in a leading global organization, apply now to become our next Lead Engineer

Job Title: Water Hygiene Technician/Water Hygiene Engineer Location: Barking and Dagenham £30000-£34000 + Van (private use) + Benefits Our client is a rapidly growing Building Services Consultancy and specialise in commercial sites in East & Central London. They are currently looking for an experienced Water Hygiene Technician/ Water Hygiene Engineer to join an existing team. This Water Hygiene Technician/Water Hygiene Engineer role will involve working on new and existing contracts across offices, health care, education and retail locations. Work is planned and will include - water sampling and temperature monitoring, basic plumbing and maintenance and descaling of taps and shower heads. Additional work to include • Maintaining and updating site logbooks in line with industry standards., • Working collaboratively within a team and independently., • Driving to locations in East & Central London, • Adhering to all safety protocols, maintaining the high standards of the business. To apply for the Water Hygiene Technician/Water Hygiene Engineer role, the following experience is required • 3+ years’ experience in water hygiene., • Able to work independently and manage time effectively., • Excellent communication and customer service skills., • Full UK driving licence. The Water Hygiene Technician/Water Hygiene Engineer role will come with full training and provide you with City & Guilds training in water hygiene, plumbing and legionella. In addition, a company van is provided which can be used for private use, a pension, health scheme and a company related bonus. For more information, please email Nick Lewis with a copy of your CV. Similar job titles and keywords - Water Hygiene Technician, Legionella Risk Assessor, Water Treatment Engineer, Water Quality Technician, Environmental Service Technician, Water Monitoring Technician, Water Systems Engineer, Field Service Engineer – Water Hygiene, Legionella Compliance Technician, TMV Servicing Engineer, Water Compliance Technician, Water Maintenance Operative, Plumbing & Water Hygiene Engineer, Environmental Compliance Engineer, Facilities Water Engineer, Legionella control, TMV servicing, Water sampling, Temperature monitoring, L8 compliance, ACOP L8, UKAS sampling, Chlorination, Disinfection works, Clean and disinfection of tanks, Water system flushing, Closed system monitoring, Risk assessments, Logbook maintenance, Remedial plumbing works, Pseudomonas testing, Bacterial sampling, HSG274 compliance. Suitable home locations - Dagenham, Barking, Ilford, Romford, Rainham, Hornchurch, Upminster, Chadwell Heath, Goodmayes, Seven Kings, Becontree, Elm Park, Collier Row, Rush Green, Purfleet-on-Thames, Aveley, Grays, Brentwood, Chigwell, East Ham

Overview We’re working with a specialist engineering organisation looking to appoint a Senior Design Engineer to support the delivery of complex electronic and mechanical design projects. This role sits at the heart of engineering and manufacturing, ensuring designs are robust, compliant, and optimised for production. You’ll play a key role in driving projects from concept through to delivery, while supporting cross-functional teams and mentoring junior engineers. Key Responsibilities Manage design projects to deliver against specification, budget, and timelines Work closely with sales and internal teams to translate technical requirements into deliverable designs Ensure compliance with design gate processes and provide status updates to stakeholders Produce and review system-level designs, schematics, and PCB layouts Carry out simulations, analysis, and component selection Generate and manage technical documentation including data packs and specifications Support production teams with design for manufacture, testing, and debugging Lead and participate in peer reviews to ensure design quality and compliance Oversee test verification activities including ATP, FAI, and FAT processes Maintain and manage component libraries and configuration control Drive continuous improvement across design and manufacturing processes Support cross-functional teams including quality, procurement, and project management Mentor and develop junior engineers, graduates, and apprentices Key Requirements Strong experience in electronic design engineering, particularly power supply design Experience with DC/DC and AC/DC power conversion (low and high power) Understanding of EMC/EMI, thermal management, and environmental considerations Proven experience with PCB design and schematic capture (Altium preferred) Knowledge of manufacturing processes including PCB assembly, testing, and mechanical integration Experience working within regulated or quality-driven environments Strong understanding of configuration management and design standards Ability to produce detailed technical documentation and specifications Experience supporting product testing and qualification Key Competencies Strong problem-solving skills with the ability to analyse complex technical data Clear and effective technical communication Ability to manage multiple priorities in a fast-paced environment Collaborative approach with strong interpersonal skills Leadership capability with experience mentoring and developing others Proactive and organised with a strong attention to detail Qualifications HNC/HND in a relevant engineering discipline (minimum) Degree qualified preferred (or equivalent experience) Experience within a relevant industry environment Why Apply? This is a great opportunity to work on technically challenging projects within a collaborative engineering environment, where you’ll have real influence over design, manufacturing, and continuous improvement initiatives

Job Requirements Quest Global is an organisation at the forefront of innovation and one of the worlds fastest growing engineering services firms with deep domain knowledge and recognised expertise in the top OEMs across seven industries. We are a twenty-five-year-old company on a journey to becoming a centenary one, driven by aspiration, hunger and humility. We are looking for humble geniuses, who believe that engineering has the potential to make the impossible, possible; innovators, who are not only inspired by technology and innovation, but also perpetually driven to design, develop, and test as a trusted partner for Fortune 500 customers. As a team of remarkably diverse engineers, we recognize that what we are really engineering is a brighter future for us all. If you want to contribute to meaningful work and be part of an organization that truly believes when you win, we all win, and when you fail, we all learn, then were eager to hear from you. We are looking to expand our civil engineer capability in all levels of experience and are keen to hear from you if you feel youre ready to take the next step in your career. You must be a Sole UK National and qualify for Security Clearance. Job Description The Civil Engineer Lead will work collaboratively with the Customer to provide technical support on non-nuclear and nuclear assets and facilities within the dockyard site; for example, refurbishments/renovation, new developments and listed building compliance. This role may include but is not limited to: supporting the customer in key delivery projects, providing professional and flexible technical support to the delivery of construction related projects, ensuring that all engineer aspects of construction modifications, redesigns and new infrastructure are scoped, developed and delivered to meet operational requirements, safety standards and compliance obligations. Key Responsibilities: Providing advice on construction related matters Providing input into various stages of the RIBA process Producing drawing information and specification Liaising with key customer stakeholders and design team Interfacing with statutory authorities Arrange Site and Ground Investigations, undertake condition surveys and interpret findings to create reports and remediation strategies where necessary. Alterations to existing structures including listed buildings, design of small scale new structures and Input into temporary support design Work Experience Qualifications & Experience Degree in related disciplines accredited by Institute of Civil Engineers (ICE). Relevant post-graduate civil engineering experience Proven track record in delivering projects from RIBA stages 3 to 5 Knowledge and experience working within RIBA stages 0 to 2 preferable Strong knowledge of Revit and/or similar BIM capable software and project delivery to BIM level 2 Proficiency in understanding/production of engineering drawings and specifications. Experience in checking and verification up to category 2 within civil/structure engineering. Ability to work in ambiguous environments, working with a customer-first approach and providing flexibility to changing requirements. Desirable Attributes: Good Communication skills - Makes clear and convincing oral presentations; listens effectively; clarifies information as needed. Understanding of nuclear industry and/or other safety critical environments. Experience in working in a dockyard, marine, Defence or MoD environments particularly with asset lifecycle support . Knowledge of commercial and industrial sector environment Experience with deliver projects in compliance environmental regulations Experience working with common data environment or data delivery platforms Experience working with various size projects to provide a broad range of skills TPBN1_UKTJ

Graduate Electrical Engineer 2026 About Ferrovial Construction UK&I Ferrovial Construction is the UK based engineering and construction arm of the Ferrovial Group. It is the largest private transport infrastructure operator in the world in terms of capital invested. We have a presence across 15 countries with over 60 years’ experience. It is a Spanish multinational company operating through 4 divisions; Airports, Highways, Construction and Building subsidiaries. Ferrovial are committed to developing sustainable and innovative solutions, with the aim to create value for society, and for clients, investors and employees. We design and construct some of the UK and Ireland’s most high-profile transport infrastructure projects. We have the strength and depth to deliver complex major projects in-house, drawing on international expertise and full asset lifecycle capability. We provide our clients with cost-effective, value-added solutions and design and build sustainable assets for people and places. We maximise potential through continuous professional development and create an equal, inclusive and diverse place to work to drive innovation. At Ferrovial, we have five core values: Excellence, Innovation, Collaboration, Integrity and Respect. We are proud of our work and values which we live by to achieve our goals. Whilst working on large complex projects, you will be encouraged to achieve your maximum, all the while having support and guidance. An ability to work well in a team is key to the delivery of our projects, so that effective communication skills are critical. Ferrovial prioritises the mobility of its employees as a means of fostering talent. The company has set up a Global Mobility Portal, which operates as an internal job board where employees can find all openings worldwide. The company is keen for graduates to move overseas and gain experiences of different cultures and business ways and methodologies. Please note this opportunity is an option after the Graduate Programme unless you have a civils background. The role Ferrovial Construction is looking for Graduate Electrical Engineers to assist with, and in some cases be responsible for, day to day activities on a variety of major UK infrastructure projects. The Ferrovial 2-year graduate development programme is designed to develop personal, professional and technical skills through a blended approach. You will work under the supervision of Section/Project Managers and in collaboration with the site team. Key Responsibilities Contribute to the achievement of Health and Safety in accordance with company policy and ensure quality on our projects is upheld. Key Accountabilities * To focus on electrical systems including developing polices, standards, inspection procedures, and evaluation tools for M&E matters. * To assist in the co-ordination of the team activities to ensure that the project is completed within the budget in line with the cost plan, and on time in line with the agreed construction process. * To work with the procurement team to ensure compliance with financial parameters. * To assist in ensuring the project complies with health, safety, environmental and quality requirements. * To assist the Project Manager on the management of the team, giving advice on appropriate resourcing levels, effective performance management, employee development and motivation. * Adopting and promoting Ferrovial Construction UK Vision and Values. Taking ownership of the work assigned to you. * Adhere to safe working practice regulations on site and ensure all staff comply with the requirement. Skills and Competence We are looking for graduates with: * Excellent communication skills and ability to interact at a variety of levels * Degree or Masters in Engineering (All disciplines considered) * Motivated to learn and add value to the team, the role and the Graduate programme * Analytical thinker who enjoys problem solving * A proven team player who can effectively work with others * Enjoys working under pressure to meet deadlines * Proactive approach to working and learning * Commercial awareness and an understanding of the industry * Familiar with all Microsoft packages Interpersonal Skills * Highly motivated * Logical thinker with a willingness to learn * Resilient and a flexible approach to working * Results driven with strong communication skills * Work independently with minimal supervision Desirable * Knowledge of Health and Safety Legislation * Engineering experience & CSCS Card Essential Must have right to work in the UK by the start of employment and for the duration of the Graduate Programme. What we offer On the Ferrovial Construction Graduate programme you will get: * 2-year development programme in line with the UK engineering framework. Exposure to a diverse range of engineering disciplines * Work with Contractors and Sub-contractors to develop effective partnerships * Attend a variety of blended training to develop your technical, professional and behavioural skills * You will start the process of becoming chartered with internal and external support * You will either be given a project to work on or be given a small “Package” to manage from start to finish * Gain an understanding of Ferrovial Construction from a global perspective, with mobility opportunities * Given the opportunity to participate in charity volunteering and innovation projects. And much more! Other details The position is scheduled to start in September 2026 at the latest, if you wish to start earlier, we can accommodate this. Please note that this job description does not represent a comprehensive list of activities and employees may be requested to undertake other reasonable duties. Ferrovial Construction UK is an Equal Opportunities employer and as such treats applications equally and recruits purely based on skills and experience. We are committed to building an inclusive team from a variety of different backgrounds, perspectives and skills so we encourage candidates from underrepresented groups to apply

Technical Sales Executive (OEM / Instrumentation) £28,000 - £32,000 + Uncapped Commission (OTE £40k-£45k) + Company Car + Training + Progression + Company Benefits Wiltshire (Office-Based with UK Travel) Are you a technically minded engineer or scientist looking to move into a varied technical sales role with full training and strong earning potential? You will be responsible for a mix of internal sales, customer demonstrations, and technical support, helping clients understand and implement innovative pollution analysis equipment. This role is primarily office-based, with regular UK travel to customer sites for demonstrations, training, and support. The company is a growing manufacturer of specialist environmental testing equipment, supplying into sectors such as waste management, infrastructure, and environmental consultancy. With cutting-edge technology and a small, agile team, they offer a dynamic environment where you can make a real impact. This role would suit a Technical Sales Engineer, Lab Technician, or Environmental/Scientific professional looking to transition into a customer-facing role, combining hands-on technical work with business development. The Role: Support internal sales and business development activities * Deliver product demonstrations and customer training across the UK * Provide technical support and respond to customer enquiries * Service, calibrate, and troubleshoot analytical equipment * Assist with product preparation and testing in the office * Build relationships with customers and identify new opportunities The Person: Background in engineering, chemistry, or environmental science * Full UK driving licence and willingness to travel If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. Reference Number: BBBH25009 Keywords: Technical Sales Engineer, Internal Sales Engineer, Scientific Sales, Environmental, Instrumentation, Analytical Equipment, Chemistry, Environmental Science, Lab Technician, Calibration, Technical Support, Business Development, Wiltshire We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. TPBN1_UKTJ