Trabajos environmental engineer en BirminghamCrear alertas

Assistant Geotechnical Engineer / Assistant Geo-Environmental Engineer Due to continued expansion, an abundant pipeline of works, and the recent award of a number of long-term major contracts, our client is now looking to appoint an Assistant Geotechnical Engineer or Assistant Geo-Environmental Engineer who will enjoy a challenging, demanding and varied role, and a fantastic opportunity working wi... ZIPC1_UKTJ

Senior Cable Design Engineer (HV / EHV) Transmission & Distribution Projects Salary: £dependent on experience + benefits Location: Remote / Hybrid (with occasional site travel) Type: Full-time The Opportunity ARCA Resourcing is partnering with a specialist engineering business delivering complex transmission and distribution projects across the UK. With increasing demand across HV and EHV cable systems, the business is investing in its in-house design capability. This hire will play a key role in delivering technically robust cable designs and shaping future design standards within the organisation. This isn’t just a design role, it’s a chance to influence how projects are engineered and delivered. Role Overview You’ll take ownership of HV/EHV underground cable system design from concept through to detailed design and construction support. Working across multidisciplinary teams, you’ll ensure solutions are technically sound, buildable, and aligned to programme and commercial constraints - while acting as a key technical interface with clients and stakeholders. Key Responsibilities Cable System Design • Deliver HV/EHV cable system designs (typically 33kV–400kV), • Undertake cable sizing, selection, and system configuration, • Produce detailed design packages including drawings, layouts, and specifications, • Define cable routes, installation methods, and system layouts, • Specify accessories including joints, terminations, and bonding systems Electrical Design & Calculations • Perform and review key cable calculations including ampacity (CYMCAP), thermal modelling, and short-circuit ratings, • Carry out sheath bonding and induced voltage calculations, • Assess losses, EMF, and overall system performance, • Ensure designs meet performance, safety, and reliability standards Installation Engineering • Develop installation methodologies for cable systems, • Assess pulling tensions, sidewall bearing pressures, and installation constraints, • Define requirements for trenching, ducting, HDD, or tunnelling, • Ensure designs are practical and aligned to site conditions Survey Definition & Integration • Define survey requirements (topographical, PAS128, GI, environmental), • Review and interpret survey outputs to inform routing and constructability, • Identify gaps or risks in survey data and specify further requirements, • Ensure survey data is fully integrated into design outputs Technical Compliance & Assurance • Ensure compliance with National Grid, DNO, IEC, and BS standards, • Support technical assurance processes, design reviews, and approvals, • Ensure alignment with CDM and regulatory requirements Project & Stakeholder Coordination • Work closely with civil, structural, and construction teams, • Align design outputs with programme and delivery constraints, • Act as a technical interface with clients, including National Grid and DNOs, • Support design approvals and technical queries Mentoring & Capability Building • Support and mentor junior engineers and designers Essential skills • Strong experience in HV/EHV underground cable design (33kV–400kV), • Proven track record delivering full cable design packages (concept construction), • Experience working on National Grid and/or UK DNO projects, • Strong capability in cable installation engineering and associated calculations, • Proficiency in tools such as CYMCAP, Cableizer, AutoCAD (or equivalent), • Strong understanding of cable systems, accessories, and bonding Desirable skills • Degree in Electrical Engineering (or related discipline), • Chartered Engineer status (or working towards), • Experience supporting construction or commissioning phases, • Experience in trenchless installation methods (HDD, microtunnelling) Development & Progression This role offers a clear route into Lead or Principal Engineer level, with increasing responsibility across technical leadership, design governance, and client engagement. For more information, please apply via the link below for immediate consideration!

Junior Project Manager – Tipton People Solutions are currently recruiting for a Junior Project Manager to join our well-established client based in Tipton. This is a fantastic opportunity for a motivated and ambitious individual to develop their career in project management, working alongside experienced Project Managers on high-value, technically complex engineering projects. This position is ideal for candidates looking to progress their career within an engineering or technically regulated environment. It would suit applicants who have previously worked as a Project Coordinator, Project Engineer or Operations Manager. Shifts: • Monday to Friday • 08:00 – 17:00 (39 hours per week) Salary: • £35,000 – £45,000 per annum (dependent on experience) Benefits: Your benefits as a Junior Project Manager will include: • Competitive salary with annual reviews • Company pension scheme • Free on-site parking • Training and career development opportunities • Exposure to major engineering and nuclear projects Day to Day Duties: As a Junior Project Manager, your day-to-day duties will include: • Supporting Project Managers in defining project strategy, scope, budget, and resource requirements • Assisting with the coordination of cross-functional teams to achieve project goals • Maintaining accurate project documentation in line with company, legal, and quality standards • Monitoring project progress and assisting with schedules, budgets, and forecasts • Supporting risk management by identifying issues and assisting with mitigation plans • Ensuring project change control processes are followed and scope variations are managed • Assisting with commercial and contractual administration, including variation management • Preparing internal and customer project reports, including monthly and quarterly reviews • Managing smaller projects or individual workstreams under senior supervision • Ensuring all activities comply with Health, Safety, and Environmental regulations Essential Skills: The skills required to be a Junior Project Manager are: • Strong understanding of core project management principles and processes • Awareness of contract requirements, scope management, and risk control • Minimum of two years’ experience in a similar role, ideally within nuclear, aerospace, oil & gas, or rail sectors • Understanding of project cost control and commercial awareness • Excellent communication, coordination, and teamwork skills • Ability to influence and motivate others • Proficiency in MS Excel, Word, and PowerPoint • Fluent written and spoken English Desirable Experience: • Formal qualification in Project Management (APM, PRINCE2, or similar) • Experience supporting technical or engineering-based projects • Exposure to cost forecasting, project reporting, and risk management tools Training Provided: • Comprehensive training and ongoing professional development • Clear career progression within the organisation Apply: If you are ready to take on this opportunity as a Junior Project Manager, please apply today or contact our recruitment team to find out more. People Solutions do not charge candidates any fees or request deposits at any stage of the recruitment process.

Your new companyYou'll be joining a well-established building services consultancy with a strong reputation across the wider built-environment sector. The business works with clients in public buildings, commercial developments, environmental projects, and education facilities. With a collaborative culture and a growing Midlands presence, the consultancy places real emphasis on professional development - giving early-career engineers the support, mentoring, and project experience they need to build a long-term technical career.Your new role As a Graduate / Early-Career Electrical Design Engineer, you'll support the delivery of electrical design and technical consultancy across a wide range of projects. Working under the guidance of senior engineers, you'll be involved in:Assisting with feasibility studies and early-stage design developmentSupporting the production of electrical services designs from RIBA Stages 0-4Preparing technical documentation, reports, and drawingsCompleting site-based surveys, condition assessments, and inspectionsHelping to review contractor information and technical submissionsCollaborating with multidisciplinary internal teams to deliver high-quality project outcomesThis role offers a strong balance of office, site, and client exposure, giving you early responsibility while still ensuring structured support.What you'll need to succeedWe're looking for someone motivated, eager to learn, and interested in building a career within electrical building services design. Ideally, you'll bring:A degree (or equivalent) in Electrical Engineering or Building Services EngineeringSome exposure to building services electrical design - from a placement, internship, or junior roleCompetence in AutoCAD; familiarity with CAD/BIM tools such as Bluebeam or Revit is beneficialStrong communication skills and the confidence to work with both colleagues and clientsA willingness to undertake site visits and travel across the MidlandsA genuine interest in the built environment and progressing toward professional accreditation (IEng/CEng)Don't worry if you don't tick every box - enthusiasm and a desire to develop are just as important.What you'll get in returnYou'll join a supportive consultancy that values flexibility, professional development, and employee wellbeing. Hybrid working is available, and you'll have access to tailored training, mentoring, and opportunities to work on high-impact regional projects. The role offers clear progression routes and the chance to make a genuine contribution to the development of the local M&E service - giving you both personal growth and long-term career potential.What you need to do nowYou'll join a supportive consultancy that invests heavily in its people. Expect:Hybrid working and genuine work-life balanceA structured development plan, including mentoring and funded trainingEarly exposure to a broad mix of electrical and multidisciplinary projectsClear progression opportunities as the Midlands M&E team continues to expandA friendly, collaborative environment where you can make a real impactIf you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now.If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

Plant Engineer – PPM & CalibrationErdington, BirminghamStarting salary £48,160 rising to £52,652 (Jan 2027, subject to successful review)Morning Shift: 6:00am – 2:00pm Client - A leading global manufacturer supplying high-performance components to the aerospace sector. To ensure the maintenance and development of manufacturing facilities, managing PPM schedule adherence, instrument and process tooling calibration, and insurance system compliance. You will also take ownership of on-site inspection and condition monitoring contracts, ensuring full internal and external audit compliance. Main Duties & Responsibilities • Ensure health, safety and environmental requirements are met at all times, • Manage all instrument and process tooling calibration contracts, maintaining the calibration database, • Manage condition monitoring contracts and associated systems, • Oversee insurance inspection contracts and certification systems, • Ensure internal and external PPM & calibration audit compliance, • Develop improvements across calibration and condition monitoring contracts, • Drive best practice and synergies across group sites, • Ensure legislative and insurance compliance, liaising with insurers for inspection schedules, • Establish and report on KPIs, • Support TPM and continuous improvement activities, • Benchmark against other organisations for best practice Must have: • Recognised qualification in Lifting Equipment Inspection, • Experience in Calibration Compliance, • Boiler operation and management Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.

Site Engineer / Project Engineer (Electrical, OHL, Transmission, National Grid) Transmission, Distribution, OHL Salary: £dependent on experience + benefits + site bonuses Benefits: Company vehicle (for site travel), professional memberships, support toward chartership Location: UK-wide (travel to project sites and office locations as required) Type: Full-time ARCA Resourcing is partnering with an ambitious and fast-growing engineering organisation within the UK construction and energy sector to recruit a Site / Project Engineer. This is a fantastic opportunity for an engineer looking to develop a well-rounded skillset across design, site delivery, and project engineering, working on high-voltage infrastructure and renewable energy projects across the UK. The Role This is a hybrid engineering role combining design coordination, CAD work, project support, and site-based responsibilities. You’ll gain exposure across the full project lifecycle - from early-stage surveys and design through to construction, commissioning, and close-out - supporting the delivery of substations, overhead lines, cable installations, and grid connection schemes. Key Responsibilities • Interface with clients including National Grid and UK DNOs, • Support communication between site teams, design teams, and project leadership, • Coordinate and support topographical, environmental, and utility surveys, • Produce and update 2D and 3D CAD drawings for design and construction use, • Assist with preparation of technical documentation, including method statements and construction phase plans, • Coordinate site logistics, deliveries, and supply chain interfaces, • Assist in managing site activities to ensure safe and efficient delivery, • Liaise with subcontractors, suppliers, and client representatives, • Support implementation of SHEQ (Safety, Health, Environment & Quality) standards, • Contribute to risk assessments, HAZIDs, and constructability reviews, • Ensure compliance with CDM Regulations and site safety requirements, • Proficiency in AutoCAD and relevant CAD software (e.g. Civil 3D, MicroStation), • Understanding of transmission & distribution or renewable energy projects, • Awareness of health & safety legislation, including CDM, • Good communication and stakeholder engagement skills Experience & Qualifications Essential: • Experience on live construction or infrastructure projects in an engineering or supervisory role, • Practical understanding of site-based project delivery, • Experience working on National Grid or DNO projects, • Familiarity with project controls (cost, programme, risk), • Exposure to substations, overhead lines, cables, or grid connections, • Progress toward or holding relevant authorisations (e.g. SR163, Competent Person, NSI8), • Experience with UAV surveys, GIS systems, or digital field tools Why Apply? • Work with a forward-thinking and growing organisation in the energy sector, • Gain exposure across design, site delivery, and project engineering, • Be involved in high-profile UK infrastructure and renewable projects, • Strong support for career development and professional progression, • Competitive salary, benefits, and performance-related bonuses Apply Now If you’re a motivated engineer looking to build a diverse career across project delivery and site engineering, we’d love to hear from you. Apply today through ARCA Resourcing. Please click on the link to apply.

Electrical Design Engineer, M&E and up to 33kV Distribution \n\nBirmingham, B2 5ST\n\n£70,000 to £90,000 plus car or allowance, plus pension\n\nWe need at least 3 Electrical Design Engineers for a prestigious Contractor in the M&E and Power Engineering space. \n\nYou will:\n\nUsing initiative and confidence to put forward solutions based on sound engineering principles.\nDesign and checking of engineering solutions\nProduction and/or review of clear, consistent, referenced calculations\nAct as the company's representative at interdisciplinary reviews\nEnsure the fitness and use of Inspection and Test Plans across the company\nEnsure HSE best practices are always followed.\nEnsure design risk assessment is compliant with installation parameters.\nProvide engineered solutions to key project problems\nEnsure all formal communication is undertaken and managed (Request For Information, Technical Queries, Early Warning Notices, ,Material Approval Requests Technical Deliverables, etc).\nDirect liaison with CAD/BIM team to ensure correct drawing modelling to BIM or other standards.\nDevelopment of scope documents for tenders and procurement processes.\nLiaison with manufacturers to determine product suitability, in partnership with procurement.\nDirect liaison with installation teams to ensure design suitability, works methodology and solve key installation issues/constructability.\nWorking with the commercial department to track technical or design change and variances.\nWorking with the planning department to plan design, installation and T&C works. Provision of accurate assessment on forecast works to complete and provide suitable readjustments to ensure project programme is maintained.You will be:\n\nExperienced within the construction industry from a Principle Contractor or Tier 2 Electrical & Mechanical contractor\n\nKnowledge of BIM and design modelling standards\nSustainability awareness\nAdvanced MS Office skills\nKnowledge of implications of offsite construction to design.\nRevit (or equivalent BIM product) or AutoCAD\nUtilisation of Mechanical or Electrical design packages (Amtech, HEVACOMP, IES Trimble, Dialux)\nA-Site or Sharepoint experience \nDesign using AutoCAD / MicroStation\nUtilisation of MS Project or P6 would be preferredQualifications:\n\nDegree in Engineering\nSMSTS or SSSTS and CSCS Card (AQP or PQP minimum)\nFull UK drivers license\nPrevious experience within an M&E Contractor and\nDetailed Design at RIBA Stage 4 or or after\nTemporary works designated individual competency - advantageousWould suit an M&E Engineer, Design Engineer, Design Manager, Design Coordinator\n\nTo apply, please speak to Gareth Bone\n\nWe also have have roles available for professional Groundworkers, Electricians, Fitters, Wirepeople, Supervisors, Machine Drivers, Authorised Persons, Competent Persons, Site Engineers, Site Managers, Site Agents, Project Managers, Commissioning Engineers, Senior Authorised Persons, Operations Managers, Maintenance Engineers, Commercial, Estimators, Health & Safety, Quality, Environmental staff and many more\n\n--- Fusion People are committed to promoting equal opportunities to people regardless of age, gender, religion, belief, race, sexuality or disability. We operate as an employment agency and employment business. You'll find a wide selection of vacancies on our website

Materials Engineer/ Metallurgist£40,000 - £45,000 + Excellent Industry Training + Career Progression + BenefitsLocation - Halesowen, Birmingham Are you a Materials Engineer or Metallurgist with experience in forging, heat treatment, process control, and metallurgical investigation looking to take the next step in your career within a specialist manufacturing environment, whilst having the opportunity to develop into a technical expert and progress into senior leadership roles? This is an excellent opportunity to join a well-established and ambitious company with advanced manufacturing capabilities, where you will play a key role in process control, metallurgical investigations, quality improvement, and technical support across a wide range of engineering operations. The company are well known for investing in their employees, offering long-term stability, training, and progression opportunities. The business is a market leader within its sector, delivering high-quality forged and heat-treated products to customers across demanding industries. Due to continued growth and expansion, they are looking to recruit a Materials Engineer / Metallurgist to strengthen their technical team. In this role you will provide metallurgical expertise across forging and heat treatment operations, investigate test failures, support quality and production teams, and contribute to continuous improvement projects. You will also work closely with customers, estimating, and internal departments to ensure technical excellence throughout the manufacturing process. The ideal candidate will be a Materials Engineer / Metallurgist with strong knowledge of metallurgical principles, manufacturing processes, and experience within a forging, heat treatment, or ferrous manufacturing environment who is looking to progress their career. This is a fantastic opportunity to join a niche and growing business where you can become a recognised technical specialist and progress into senior management in the future. The Role: * Process control across forging and heat treatment operations * Investigating mechanical test failures and producing corrective / rework plans * Monitoring trends, identifying root causes, and implementing preventative actions * Performing metallography for routine testing and failure investigations * Supporting quality with audits, non-conformance investigations, and SOP reviews * Providing technical support to customers, estimating, sales, and production teams * Assisting with R&D and continuous improvement projects * Ensuring compliance with HSE and environmental procedures The Person: * Metallurgical, Materials or Mechanical Engineering qualification (HNC / Degree or similar) * Experience within forging, heat treatment, or ferrous manufacturing environments preferred * Strong understanding of metallurgical principles and failure investigation techniques To apply for this role or to be considered for further roles, please click "Apply Now" or contact Christopher Palmer-White at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.

Job Title: Senior Product Safety Engineer Location: Coventry, hybrid We offer a range of hybrid and flexible working arrangements – please speak to your recruiter about the options for this particular role. Salary: Competitive Who we are Join BAE Systems and you’ll be part of something bigger. As a valued member of our global colleague network, you’ll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You’ll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there’s no limit to where a career at BAE Systems could take you. What you will be doing As a Senior Product Safety Engineer you will support the Engineering Delivery Manager in the development, delivery and maintenance of the Project Product Safety Management System and Product Safety Case. Your work will ensure that products are safe to own, operate and maintain, while meeting all legal and regulatory requirements. Core duties • Develop, implement and maintain the Safety Management System, ensuring safety processes are robust, compliant and aligned with engineering and programme requirements, • Support the production and maintenance of Project Safety Management Plans, ensuring safety activities are clearly defined and delivered throughout the project lifecycle, • Undertake Product Safety hazard and risk identification, management and assessment activities, considering the environmental and operational challenges the product will be exposed to, • Support the development of the Project Product Safety Case, including preparation of Safety Case Reports and clear, evidence-based technical safety arguments, • Administer and manage the Project Hazard Log, ensuring hazards are identified, recorded, assessed and appropriately managed, • Apply knowledge from a Science, Technology, Engineering or Mathematics (STEM) degree or equivalent experience to interpret and analyse technical data and support safety activities across design, manufacturing, assembly, commissioning and testing phases of the submarine lifecycle As well as a competitive pension scheme, BAE Systems also offers employee share plans and an extensive range of flexible discounted health, wellbeing and lifestyle benefits. These include a green car scheme, private health plans and shopping discounts. You may also be eligible for an annual incentive. The Integrated Combat Systems Team The Integrated Combat Systems team plays a key role in supporting submarine programmes by ensuring the safe design, development and operation of complex systems. As a Product Safety Engineer within the team, you will help ensure the delivery of robust safety management processes and safety cases that enable products to be owned and operated safely throughout their lifecycle. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. A place where everyone can thrive We’re committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. We welcome applications from people from all backgrounds and want to make sure our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism or an anxiety disorder) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role. Why BAE Systems? Here you’ll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You’ll be recognised for your contribution and enjoy rewards tailored to what’s most important to you and your family, supporting your financial and personal wellbeing as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and be proud of the difference you make. Closing Date: 13th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible. #LI-KP1 #LI-hybrid

Would you like to be part of Vital Energi’s Strategy of Growth? If so, we’re looking for a Skilled Commissioning Engineer to join our specialist team where they will take direct responsibility for the day-to-day operation and maintenance of a number of Vital Energi’s plantrooms/ solar farms and boiler rooms. The Company Vital Energi is a leading provider of renewable energy infrastructure and systems to the public and private sectors. We are supporting Hospitals, Universities, New Build developments, Towns and Cities as well as Industrial and Commercial clients to decarbonise their buildings. We have and continue to work on ground-breaking projects throughout the UK which are supporting the UK’s Net Zero targets, such as the recently announced £1 billion low-carbon infrastructure project for Westminster. With plans to double our headcount over the coming years, supported by offices opening in new locations across the country and our strong investment pipeline, coupled with our expansion into new markets such as industrial power generation with our very own Energy-from-Waste facility, there is no better time to join the family here at Vital Energi. The Role This role would suit an experience commissioning engineer with mechanical, electrical, or controls systems experience. It’s ideal for someone who enjoys hands-on work, problem-solving, and seeing energy projects come to life, the role will involve working within a number of Plant rooms, Solar Farms, Industrial plant rooms etc.. Key Responsibilities • Plan, manage, and carry out commissioning activities across solar farms, energy centres, and boiler houses., • Develop detailed commissioning plans, risk assessments, and method statements., • Conduct pre-commissioning inspections and functional testing of plant, equipment, and systems., • Verify that all systems meet operational and performance requirements before handover., • Identify, diagnose, and resolve commissioning issues, escalating where necessary., • Collaborate with project teams, subcontractors, and clients throughout the commissioning process., • Produce accurate and comprehensive commissioning records, test data, and reports., • Support handover to operations teams, ensuring all documentation is complete and training is provided., • Maintain compliance with health, safety, and environmental policies at all times., • Contribute to process improvement initiatives within the commissioning department. Qualifications & Experience • HNC/HND or equivalent in Electrical, Mechanical, or Building Services Engineering., • Proven experience in commissioning within the energy, utilities, or renewables sectors., • Strong understanding of control systems, instrumentation, and electrical safety., • Knowledge of/experience with Renewable Energy technologies such as Heat Pumps and Solar will be highly advantageous, • Experience with PLC's, • Full UK manual driving licence The Package: • Salary negotiable DOE, • Van and fuel card, • Contributory Company Pension Scheme, • Non-contributory death-in-service insurance, • Employee Assistance Programme, • 25 Days Holiday plus 8 days bank holidays., • Additional holidays awarded in line with length of service, • Option to purchase/sell additional holidays, • Onsite gym/wellbeing centre at our Blackburn Head Office, • Discounted gym membership across the UK, • EV charging points where possible Applications will be processed within 28 days of receipt. If you have not heard from us within this time period it will mean that your application has unfortunately been unsuccessful. The company is opposed to all forms of discrimination and will select for employment, training and promotion on the basis of suitability for the job and/ or merit. It is company policy that no job applicant or employee receives less favourable treatment than another on the grounds of sex, race, colour, age, ethnic or national origins, political affiliations, religious beliefs, marital status, physical disability or is disadvantaged by unjustifiable conditions or requirements. Only applicants who are legally entitled to work in the UK and are currently resident in the UK are invited to apply. Notice to Agency and Search Firm Representatives: Vital Energi Utilities Ltd is not accepting unsolicited CVs from agencies and/or search firms for this job posting. CVs submitted to any Vital Energi Utilities Ltd employee by a third party agency and/or search firm without a valid written & signed search agreement, will become the sole property of Vital Energi Utilities Ltd. No fee will be paid if a candidate is hired for this position as a result of an unsolicited agency or search firm referral. Thank you.

Location: England – West Midlands Contract Type: Permanent We are seeking an experienced Design Engineer to support our client in delivering 400kV high-voltage substation design projects, playing a key role in shaping the future of the UK’s energy infrastructure. What You’ll Be Doing • Design substations in line with client requirements, budgets, and project timelines, • Support tender submissions, contract documentation, and preparation of technical drawings, • Collaborate closely with internal teams and clients to ensure efficient project delivery, • Undertake regular site visits and maintain strong coordination with operations teams, • Mentor and support junior engineers and CAD technicians, • Participate in design reviews and contribute to continuous improvement initiatives, • Ensure compliance with safety, quality, and environmental standards (OHSAS 18001, ISO9001, ISO14001), • Communicate effectively and professionally with stakeholders at all levels What You’ll Bring • Degree or HND in Electrical/Electronic Engineering, • Minimum 5 years’ experience in power transmission and substation design, • Strong knowledge of National Grid standards, British Standards, and UK design regulations, • Proficiency in 2D CAD software (Autodesk preferred), • Ability to quickly adapt to new engineering tools and systems, • Experience with NGET Stage 4.4 design and earthing systems up to 400kV, • Understanding of related disciplines including overhead lines, civil design, protection & control, and HV cables Desirable • MSc or Chartered Engineer status, • Expertise in CDEGS, AutoCAD, and power system analysis tools

Site Engineer / Project Engineer (Electrical, OHL, Transmission, National Grid) Transmission, Distribution, OHL Salary: £dependent on experience + benefits + site bonuses Benefits: Company vehicle (for site travel), professional memberships, support toward chartership Location: UK-wide (travel to project sites and office locations as required) Full-time ARCA Resourcing is partnering with an ambitious and fast-growing engineering organisation within the UK construction and energy sector to recruit a Site / Project Engineer. This is a fantastic opportunity for an engineer looking to develop a well-rounded skillset across design, site delivery, and project engineering, working on high-voltage infrastructure and renewable energy projects across the UK. The Role This is a hybrid engineering role combining design coordination, CAD work, project support, and site-based responsibilities. You’ll gain exposure across the full project lifecycle - from early-stage surveys and design through to construction, commissioning, and close-out - supporting the delivery of substations, overhead lines, cable installations, and grid connection schemes. Key Responsibilities • Interface with clients including National Grid and UK DNOs, • Support communication between site teams, design teams, and project leadership, • Coordinate and support topographical, environmental, and utility surveys, • Produce and update 2D and 3D CAD drawings for design and construction use, • Assist with preparation of technical documentation, including method statements and construction phase plans, • Coordinate site logistics, deliveries, and supply chain interfaces, • Assist in managing site activities to ensure safe and efficient delivery, • Liaise with subcontractors, suppliers, and client representatives, • Support implementation of SHEQ (Safety, Health, Environment & Quality) standards, • Contribute to risk assessments, HAZIDs, and constructability reviews, • Ensure compliance with CDM Regulations and site safety requirements, • Proficiency in AutoCAD and relevant CAD software (e.g. Civil 3D, MicroStation), • Understanding of transmission & distribution or renewable energy projects, • Awareness of health & safety legislation, including CDM, • Good communication and stakeholder engagement skills Experience & Qualifications Essential: • Experience on live construction or infrastructure projects in an engineering or supervisory role, • Practical understanding of site-based project delivery, • Full UK driving licence and willingness to travel Desirable: • Experience working on National Grid or DNO projects, • Familiarity with project controls (cost, programme, risk), • Exposure to substations, overhead lines, cables, or grid connections, • Progress toward or holding relevant authorisations (e.g. SR163, Competent Person, NSI8), • Experience with UAV surveys, GIS systems, or digital field tools Why Apply? • Work with a forward-thinking and growing organisation in the energy sector, • Gain exposure across design, site delivery, and project engineering, • Be involved in high-profile UK infrastructure and renewable projects, • Strong support for career development and professional progression, • Competitive salary, benefits, and performance-related bonuses Apply Now If you’re a motivated engineer looking to build a diverse career across project delivery and site engineering, we’d love to hear from you. Apply today through ARCA Resourcing. Please click on the link to apply.

UK‑Wide Remediation Projects Looking to accelerate your career with one of the UK’s most respected remediation contractors? VertaseFLI is searching for a talented Environmental Engineer to join our technically driven, hands‑on team. If you’ve got a few solid years under your belt and want real responsibility, real variety and real progression, this is the role that will take you there. What You’ll Do You’ll play a key role across the full lifecycle of our remediation projects — from early design and investigation through to delivery, monitoring and verification. Expect a mix of office and site work, exposure to a wide range of technologies, and the chance to work closely with project managers, site teams, clients and regulators. You’ll get involved in: • Designing and delivering Phase 1 & Phase 2 site investigations, • Environmental monitoring, sampling and data interpretation, • Supporting remediation design, pricing and tender development, • Producing technical reports, deployment forms and validation documentation, • Risk assessments for human health and controlled waters, • Liaising with clients, suppliers and regulators, • Deputising for Site Managers or Project Managers when required This is a role where you’ll learn fast, contribute immediately and build a strong technical foundation for future progression. What You’ll Bring • Degree in a relevant environmental or engineering discipline, • Around 3–5 years’ experience in site investigation, monitoring or remediation, • Strong understanding of environmental regulations, • Experience with verification data, GIS and sampling techniques, • Confident communicator with excellent organisational skills, • Full UK driving licence + relevant CSCS card Why VertaseFLI? Because you’ll be joining a company that doesn’t subcontract its remediation work — meaning you get hands‑on experience with a huge range of technologies and project types. You’ll work alongside industry experts, gain exposure to major UK projects and have clear pathways to progress into senior technical, project management or specialist roles.

Senior / Principal Electrical Design Engineer\n\nLocation\n\nBirmingham, West Midlands (County) – Hybrid Working\n\nDescription\n\nSenior / Principal Electrical Design Engineer- Building Services\n\nConsultancy / Building Services / Senior / Principal Electrical Design Engineer / MEP\n\nThis is an exciting opportunity to join an established but growing consultancy, the successful candidate will be able to progress their career and develop with the growth and success of the business.\n\nMy client is an innovative, forward thinking building services consultancy, specialising in providing inspiring design, and advisory services to a wide range of sectors such as industrial, general commercial, residential, health and higher education. .\n\nThe Engineer will be a pivotal part of the electrical design and consultancy discipline helping them take their business forward. With a focus on growth and excellent client relationships, my client is looking for someone who is enthused by an aim to deliver the best outcome, is technically competent and who can lead and own end to end project management and act as a strong client interface.\n\nResponsibilities\n\n * You will take responsibility for design delivery and own the quality of work that you produce. Helping to Mentor and develop more junior engineers, as the business continues to grow.\n\n * Working alongside other Principal Engineers and Directors’, facing clients, responding to client needs, developing, and producing reports, specifications, undertaking site inspections and overseeing testing and commissioning activities, following legislation, standards and all health and safety, quality and environmental company policies and procedures.\n\n * To perform electrical engineering design and oversee and organise the work performed by others in your team.\n\n * To act as electrical discipline lead for projects and be responsible for the resourcing and quality of output produced for the project.\n\n * To provide technical leadership and support professional development of engineers within the electrical team.\n\n * To mentor more junior engineer and to ensure good engineering design delivery from drawing practices to document control and management.\n\n * To prepare and present designs, reports, calculations, and specifications.\n\n * To conduct technical review of projects.\n\n * Attending and/or arranging attendance to site, preparing clear and concise reports to summarise findings.\n\n * To support Directors in financial control of projects.\n\n * Travel and work flexible hours\n\nSkills and Experience Required\n\n * BEng or Meng., Chartered or working towards\n\n * Previous consultancy experience of a minimum of 5-7 years demonstrating a successful career trajectory over the years.\n\n * Excellent technical knowledge in Electrical Design Engineering\n\n * Ideally electrical design including administration, drawing and project document preparation (ability to do and also to delegate to others)\n\n * A good understanding of multi-disciplinary projects to coordinate/manage/undertake.\n\n * Experience of Site inspection, witness testing and supervision of contractors.\n\n * Ability to mentor and supervise graduates, engineers, and senior engineers.\n\n * Demonstrable track record of managing, leading and successfully delivering projects in an engineering design consultancy.\n\n * Understanding of Mechanical, Electrical and Public Health Engineering (MEP) and interdisciplinary design through all stages of the design process.\n\n * Ideally, but not essential, proficiency in report and specification writing, calculations (Dialux, Relux, Amtech), AutoCAD, REVIT and/or Microstation and developing designs from first principles

Job Title: Senior Product Safety Engineer\n\nLocation: Coventry, hybrid\n\nWe offer a range of hybrid and flexible working arrangements – please speak to your recruiter about the options for this particular role.\n\nSalary: Competitive\n\nWho we are\n\nJoin BAE Systems and you’ll be part of something bigger. As a valued member of our global colleague network, you’ll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You’ll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future for all of us.\n\nFrom the depths of the ocean to the far reaches of space, there’s no limit to where a career at BAE Systems could take you.\n\nWhat you will be doing\n\nAs a Senior Product Safety Engineer you will support the Engineering Delivery Manager in the development, delivery and maintenance of the Project Product Safety Management System and Product Safety Case. Your work will ensure that products are safe to own, operate and maintain, while meeting all legal and regulatory requirements.\n\nCore duties\n\nDevelop, implement and maintain the Safety Management System, ensuring safety processes are robust, compliant and aligned with engineering and programme requirements\n\nSupport the production and maintenance of Project Safety Management Plans, ensuring safety activities are clearly defined and delivered throughout the project lifecycle\n\nUndertake Product Safety hazard and risk identification, management and assessment activities, considering the environmental and operational challenges the product will be exposed to\n\nSupport the development of the Project Product Safety Case, including preparation of Safety Case Reports and clear, evidence-based technical safety arguments\n\nAdminister and manage the Project Hazard Log, ensuring hazards are identified, recorded, assessed and appropriately managed\n\nApply knowledge from a Science, Technology, Engineering or Mathematics (STEM) degree or equivalent experience to interpret and analyse technical data and support safety activities across design, manufacturing, assembly, commissioning and testing phases of the submarine lifecycle\n\nComplete peer reviews, checking, verification and assurance tasks to demonstrate the adequacy and robustness of the Project Safety Case and supporting documentation\n\nBenefits\n\nAs well as a competitive pension scheme, BAE Systems also offers employee share plans and an extensive range of flexible discounted health, wellbeing and lifestyle benefits. These include a green car scheme, private health plans and shopping discounts. You may also be eligible for an annual incentive.\n\nThe Integrated Combat Systems Team\n\nThe Integrated Combat Systems team plays a key role in supporting submarine programmes by ensuring the safe design, development and operation of complex systems. As a Product Safety Engineer within the team, you will help ensure the delivery of robust safety management processes and safety cases that enable products to be owned and operated safely throughout their lifecycle. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria.\n\nA place where everyone can thrive\n\nWe’re committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do.\n\nWe welcome applications from people from all backgrounds and want to make sure our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism or an anxiety disorder) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments.\n\nPlease be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role.\n\nWhy BAE Systems?\n\nHere you’ll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best.\n\nYou’ll be recognised for your contribution and enjoy rewards tailored to what’s most important to you and your family, supporting your financial and personal wellbeing as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and be proud of the difference you make.\n\nClosing Date: 13th May 2026\n\nWe reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.\n\n#LI-KP1 #LI-hybrid

For more information regarding this position, contact Lucas Ward at RGB Recruitment \n\nWe’re partnered with an award-winning engineering consultant with 40 years of engineering experience. They are looking for an Apprentice Civil Engineer to join their Birmingham team to support the company’s commitment to producing sustainable solutions for clients’ projects. \n \n They are a multi-disciplinary firm, covering:\n\nCivil Engineering\nStructural Engineering\nGeo-Environmental\nTransport\nWe are seeking an individual who’s enthusiastic about starting a career in engineering and is ambitious to learn. \n\n The role:\n\nWorking on a variety of challenging and interesting schemes from inception through to construction, to completion, across a range of sectors.\nProducing engineering drawings, reports and calculation with support from senior colleagues\n \nWhat you’ll need:\n\nWill need either an HNC/ HND/ Level 3 or a BTEC qualification\nAbility to commute to the office in Longbridge\nGood communication skills\nHave a drive to progress your career\n Be a problem solver, with the ability to work collaboratively with other team members.\n\nThey offer a Graduate Training Programme which will help to underpin your progression and give you the necessary skills to undertake the role. You’ll be encouraged to join their ICE training scheme and receive mentoring and support to work toward Incorporated or Member status.\n\n Benefits:\n\n25 days holiday plus bank holidays\nCompany Pension scheme\nHybrid working\nPaid training courses\nInteresting and challenging projects\nExcellent career progression potential

Site Engineer / Project Engineer (Electrical, OHL, Transmission, National Grid)\n\nTransmission, Distribution, OHL\n\nSalary: £dependent on experience + benefits + site bonuses\nBenefits: Company vehicle (for site travel), professional memberships, support toward chartership\n\nLocation: UK-wide (travel to project sites and office locations as required)\n\nType: Full-time\n\nARCA Resourcing is partnering with an ambitious and fast-growing engineering organisation within the UK construction and energy sector to recruit a Site / Project Engineer.\n\nThis is a fantastic opportunity for an engineer looking to develop a well-rounded skillset across design, site delivery, and project engineering, working on high-voltage infrastructure and renewable energy projects across the UK.\n\nThe Role\n\nThis is a hybrid engineering role combining design coordination, CAD work, project support, and site-based responsibilities.\n\nYou’ll gain exposure across the full project lifecycle - from early-stage surveys and design through to construction, commissioning, and close-out - supporting the delivery of substations, overhead lines, cable installations, and grid connection schemes.\n\nKey Responsibilities\n\n * Interface with clients including National Grid and UK DNOs\n\n * Support communication between site teams, design teams, and project leadership\n\n * Coordinate and support topographical, environmental, and utility surveys\n\n * Produce and update 2D and 3D CAD drawings for design and construction use\n\n * Assist with preparation of technical documentation, including method statements and construction phase plans\n\n * Coordinate site logistics, deliveries, and supply chain interfaces\n\n * Assist in managing site activities to ensure safe and efficient delivery\n\n * Liaise with subcontractors, suppliers, and client representatives\n\n * Support implementation of SHEQ (Safety, Health, Environment & Quality) standards\n\n * Contribute to risk assessments, HAZIDs, and constructability reviews\n\n * Ensure compliance with CDM Regulations and site safety requirements\n\n * Proficiency in AutoCAD and relevant CAD software (e.g. Civil 3D, MicroStation)\n\n * Understanding of transmission & distribution or renewable energy projects\n\n * Awareness of health & safety legislation, including CDM\n\n * Good communication and stakeholder engagement skills\n\nExperience & Qualifications\n\nEssential:\n\n * Experience on live construction or infrastructure projects in an engineering or supervisory role\n\n * Practical understanding of site-based project delivery\n\n * Full UK driving licence and willingness to travel\n\nDesirable:\n\n * Experience working on National Grid or DNO projects\n\n * Familiarity with project controls (cost, programme, risk)\n\n * Exposure to substations, overhead lines, cables, or grid connections\n\n * Progress toward or holding relevant authorisations (e.g. SR163, Competent Person, NSI8)\n\n * Experience with UAV surveys, GIS systems, or digital field tools\n\nWhy Apply?\n\n * Work with a forward-thinking and growing organisation in the energy sector\n\n * Gain exposure across design, site delivery, and project engineering\n\n * Be involved in high-profile UK infrastructure and renewable projects\n\n * Strong support for career development and professional progression\n\n * Competitive salary, benefits, and performance-related bonuses\n\nApply Now\n\nIf you’re a motivated engineer looking to build a diverse career across project delivery and site engineering, we’d love to hear from you. Apply today through ARCA Resourcing. Please click on the link to apply

Associate Electrical Design Engineer – Fully Remote Working. Can visit office if required.\n\nThis role is to join a highly successful firm of consulting engineers, specialising in mechanical, electrical and public health (MEP) engineering, you will be working on high-profile projects with leading architects, designers and contractors delivering quality services with minimum environmental impact.\n\nThis role has a strong team feel where you will be working alongside committed and enthusiastic engineers, and this is reflected in their working practices and supportive culture.\n\nYou will either be a principal electrical design engineer or an engineer already at associate level, within this role you will cover design and supervision of projects from inception to completion and be responsible for the supervision and organisation of other members of staff. You will also represent the company at meetings in connection with projects and liaise with clients and other professionals.\n\nResponsibilities include\n\n * Working as part of a design team delivering detailed design\n\n * Liaising closely with other professionals, including structural engineers, architects, surveyors, and contractors of in-house and external project teams\n\n * Preparing technical specifications and schedules and design development reports.\n\n * Develop and produce reports, specifications, guidance notes and general correspondence ensuring quality and technical quality standards are met\n\n * Reviewing and commenting on information provided by the client, contractors and other members of the professional team.\n\n * Attending design team meetings, client meetings, pre-contract and post-contract meetings.\n\n * Carry out site surveys for projects, to obtain all relevant information required for carrying out scheme design.\n\n * Attend site progress meetings as and when required, together with monitoring Contractor’s\n\nAssociate / Senior Electrical Design Engineer Skills/ Experience Required\n\n * Ideally, but not essential, degree qualified, either building services or electrical.\n\n * Experience of managing or mentoring a team of electrical design engineers within a building services consultancy.\n\n * Completed a number of projects from inception to competition as a Principal or Associate electrical design engineer.\n\nBenefits\n\n * Fully remote working, but can work in the office when required\n\n * Annual bonus\n\n * Flexible working hours\n\n * Excellent benefits and competitive salary

My Client is recruiting for a Technical Director - Clean Water Process Engineering\n\nThe Design & Advanced Technology (D&AT) Practice is seeking a Technical Director for Clean Water Process to join our team in the UK. We are looking for an energetic and experienced Clean Water Process Engineer that can both lead as technical expert in water treatment and driving forward business results.\n\nWe specialise in all aspects of process engineering within the Water Sector, including water, waste water and bioresources in the UK and internationally. Process Engineering project opportunities also stretch to other sectors such as nuclear and defence. We're committed to providing industry-leading engineering solutions right through the project lifecycle from feasibility to process commissioning, with value added through client-side support as well as construction phases.\n\nAs a key member of our technical leadership team, you'll play a vital role in shaping and delivering transformational programmes of critical UK infrastructure for our Water market clients - clients like Thames Water, Anglian Water, Environment Agency, Welsh Water, United Utilities, Scottish Water, and more.\n\nBy providing technical leadership across the organisation you'll drive results, by contributing to functional strategy, influencing senior stakeholders, and leading within the process group and multidisciplinary project teams, to deliver measurable outcomes. In this role, you will set direction for complex, high-impact projects and initiatives, anticipate business and regulatory challenges or changes, and develop innovative solutions and offerings that move the business forward.\n\nBeing a Technical Director with us involves UK wide travel. We offer hybrid working which involves 3 days per week travel/office based. This position can be based at any of our main locations: Surrey, London, Bristol, Exeter, Birmingham, Manchester, Newcastle, or Glasgow. It can also be based in our other offices but may require additional travel to main locations as needed: Peterborough, Cambridge, Cardiff, Swansea, Derby, Leeds, Belfast, Edinburgh.\n\nYour role\n\nAs a Clean Water Process Technical Director in the D&AT Practice, the successful candidate would have the following responsibilities:\nProvide Technical Leadership within discipline for the national D&AT practice.\nInfluence D&AT Practice wide initiatives and recommend best practices to improve internal process and services.\nServe as a recognised expert and technical authority in Clean Water Process Engineering across the D&AT Practice and wider business.\nProvide visible representation of your and Company's Clean Water Process Engineering technical expertise to our current and prospective clients.\nCollaborate with stakeholders at all levels, including internal and external clients, operational staff, project teams, or external stakeholders.\nRecommend and drive improvements to processes, services, and technical practices while ensuring robust engineering governance is consistently upheld.\nOversee technical input into bid proposals, defining the delivery strategy and working with cross‑functional teams to prepare high‑quality, compliant, competitive submissions.\nProactively identify opportunities for cross‑selling and business growth, using commercial insight to strengthen and expand client relationships and selling our value proposition to clients.\nGrow, develop, and manage the Clean Water Process engineering capability within the national practice, supporting talent development and succession planning.\nAnticipate emerging business, regulatory, and technology challenges, identifying risks and opportunities early and advising senior leadership.\nProvide strategic oversight across multiple complex, multidisciplinary projects, ensuring technical excellence, safe delivery, and alignment with client and practice objectives.\nWork independently even in the most challenging situations. Act as the point of escalation for the most complex technical matters and exercise personal judgement to find solutions.\n Experience and Qualifications:\n The ideal candidate would be a well-rounded and versatile individual who exemplifies the following key skills and attributes:\n\nA degree in Chemical Engineering or equivalent (e.g. Environmental, Water Engineering, etc.)\nChartered Engineer (preferably IChemE or CIWEM).\nExtensive experience in progressively senior technical roles, including significant leadership of complex, high‑risk, cross‑disciplinary projects and programmes.\nNationally or international recognised subject matter expertise in clean water treatment process and principles - conventional and advanced treatment technologies. Drinking water expertise would be essential.\nExperience in the UK Water market is essential.\nExpert knowledge of current design codes and standards as well as industry best practices including, including CDM Regulations.\nExtensive experience of design and delivery of projects with adherence to UK safety and environmental regulations, process safety techniques (e.g. HAZOP), knowledge of capital and operational costs - and risk assessments, as well as whole life carbon assessments.\nCommercially astute, with experience shaping winning proposals and driving practice and business growth.\nChampion continuous improvement, driving enhancements to processes, services, technical standards, and innovation across the practice.\nDemonstrates strong communication skills, with the ability to convey complex ideas with clarity, anticipating challenges and persuading senior stakeholders to adopt new perspectives, and navigate diverse, international and cross-cultural delivery.\nDemonstrable comprehensive knowledge in leading treatment process design and integrating elements as part of an existing or new treatment process with experience across all design phases, including construction.\nExperienced in identifying and promoting innovative solutions, challenges the status quo

Job Title: Water Hygiene Engineer\n\nLocation: Birmingham, West Midlands\n\nSalary/Benefits: £26k - £35k + Training & Benefits\n\nDue to recently winning new client contracts in the Midlands, our client is recruiting for a reliable and hardworking Water Hygiene Engineer to join their team. You will be conducting a wide range of ACOP L8 compliance duties, ensuring to maintain high standards of work and fostering strong relationships with clients. Our client provides the full range of water hygiene, legionella and plumbing services to their clients, so there are excellent further training opportunities and development. Salaries on offer are competitive and benefits include: company vehicle, overtime opportunities, pension scheme and annual leave allowance.\n\nYou will be travelling across: Birmingham, West Bromwich, Dudley, Walsall, Stourbridge, Kidderminster, Bromsgrove, Redditch, Solihull, Coventry, Nuneaton, Rugby, Tamworth, Lichfield, Burntwood, Cannock, Lichfield, Penkridge, Royal Leamington Spa, Leicester, Hinckley, Derby, Nottingham, Burton upon Trent, Rugeley, Telford, Bridgnorth, Worcester, Stafford.\n\nExperience / Qualifications:\n\n * Experience working as a Water Hygiene Engineer\n\n * Fully conversant in ACOP L8 and HSG 274 guidelines\n\n * It would be advantageous to hold plumbing experience / qualifications, but this is not essential\n\n * Hardworking attitude\n\n * Flexible to travel in line with company needs\n\n * Good literacy, numeracy and IT skills\n\nThe Role:\n\n * TMV servicing and maintenance\n\n * Showerhead disinfections\n\n * Cleans, disinfections and chlorinations on cold water storage tanks\n\n * Inspecting tanks\n\n * Basic flushing of little used outlets\n\n * Water sampling\n\n * Temperature monitoring\n\n * Producing regular service reports\n\n * Maintaining strong relationships with clients\n\nAlternative job titles: Water Treatment Engineer, Legionella Operative, Water Hygiene Operative, Legionella Service Technician, Environmental Service Technician.\n\nFuture Select are recruiting in the Water Treatment/Hygiene industry; we work with the best clients & candidates and supply the majority of permanent jobs in the market.\n\nWe would be interested in speaking to candidates with experience in any disciplines from Risk Assessors, Service Engineers, Account Managers and Business Development/Operational Managers through to Director level.\n\nWe are inundated with applications, we will endeavour to get back in touch, however if you have applied to Future Select and you have not heard from us after a week, on this occasion, you will not have been successful. Your details will be saved on our system and you will be contacted in the future if a vacancy matches your skills.\n\nFuture Select Copyright 2026

Reporting to the Director of Engineering, this is a key UK function, requiring the ability to inspire confidence from client briefings through to proposal preparation and design execution.\n\nYou will be required to lead and manage several disciplines and department heads which include Building Services, Civil & Structural and Electrical Instrumentation & Automation (EIA) as part of your overall UK leadership responsibility.\n\nResponsibilities\n\n * Take management ownership for the division and departments including direct line management of the Department Heads / sub teams including all HR issues, recruitment and development requirements.\n\n * Set the HOD targets through the PM Group Annual Engagement Conversation process which align with the Head of Engineering/Business needs.\n\n * Develop and deliver a ‘Group Development Plan’ for the Building Group aligned with the overall UK Business Strategy. Engage with PM Group technical leadership to ensure a Group mindset is adopted, facilitating the UK’s ability to be another Group delivery centre.\n\n * Develop the Building Group team ensuring on-going personal development needs. Manage, develop and mentor staff including supporting the UK graduate team.\n\n * Assist in the recruitment process with the Talent Acquisition team and HR – meeting both project and client demands.\n\n * Ensure that the department meets the utilisation targets set by the UK annual budget. Support the Buildings Group on resource management distribution and interaction with other offices for MOE growth.\n\n * Oversee and ensure flawless technical delivery working within resource budgets set by projects.\n\n * Identify areas for improvement for technical delivery, improved templates across the Group and efficiency of projects.\n\n * Support pre-sales and post business development activities including scoping, proposal, resource allocation, client visits, change control etc. Liaise with the wider PM Group business units globally to share best practice and resources to maximise utilisation\n\n * Support selected projects as Lead Engineer, SME or Design Manager and manage the teams’ capability so they can match the requirements of projects.\n\n * Develop and manage the compilation of the Building Groups master deliverable lists and adapt to suit individual project requirements.\n\n * Oversee the progress and quality of the Building Group deliverables.\n\n * Ensure compliance with PM Group and/or client quality procedures and approve project documents for issue. Ensure that all projects comply with applicable local, global and client codes and standards.\n\n * Promote Technical Excellence through PM Group’s Technology Group and SME development and links with relevant third level academic institutions\n\n * Ensure PM Group H&S Policies and Procedures are fully implemented. Ensure engineering design staff comply with health and safety requirements, European Directives, Environmental issues and CDM obligations in the home office and at client sites\n\n * Assist with developing project schedules and coordinate between all disciplines to ensure the design is in accordance with the agreed project schedule, track/report progress and implement resource controls.\n\nQualifications & Experience\n\n * Educated to degree level (preferably Masters) in a relevant engineering discipline or equivalent.\n\n * Fellow or Chartered member of an industry related professional body.\n\n * Specific building design expertise in Pharmaceutical, Food or Energy projects is preferred but as a minimum experience in Healthcare (such as operating theatres) or labs (including BSL labs) or healthcare/pharma research centres should be considered.\n\n * Experience of leading a multi-discipline team.\n\n * Proven commercial awareness and business acumen.\n\nPersonal Characteristics\n\n * Clear communicator with excellent and proven interpersonal, negotiation and influencing skills.\n\n * Ability to lead, manage and motivate a team.\n\n * Organised and adept at working to tight deadlines in a fast-moving environment.\n\n * A forward planner, who identifies and resolves project challenges effectively.\n\n * Display a positive ‘can do’ attitude towards tasks, colleagues and multi-disciplined teams.\n\n * A strong ethical approach to safety, quality, environmental protection and business.\n\n * Flexibility to travel as and when required to meet demands of clients and their projects

My client is seeking an Associate Director or Principal Engineer (OHL) to join their growing Transmission & Distribution team. You'll be part of an ambitious organisation delivering world-class engineering design on some of the most exciting and complex energy infrastructure projects in the country.\n\nThe Opportunity\n\nMy client's Transmission & Distribution Engineering division provides end-to-end services across power systems analysis, substations, cabling, overhead lines, and HVDC systems - supporting the UK's transition to a net zero grid.\n\nAs part of this team, you'll contribute to major national projects that form part of a multi-billion-pound programme to strengthen the UK grid, integrating renewable generation and enhancing long-distance power transmission capability.\n\nWhat You'll Do\n\nAs a senior member of the OHL team, you'll bring your expertise and leadership to a range of technically challenging and high-profile projects:\n\nLead the delivery of overhead line design on complex, multi-disciplinary projects (up to 400kV).\nCarry out detailed PLS-CADD modelling, line routing, structural analysis, and sag-tension calculations.\nDevelop design criteria, clearance reports, and conductor/insulator selection recommendations.\nManage scope, technical delivery, and client relationships for OHL elements within major schemes.\nSupport bids and proposals, contributing technical insight and innovative solutions.\nConduct feasibility studies and ensure all designs meet safety, environmental, and quality standards.\nProvide leadership in internal reviews and quality checks of designs, reports, and calculations.\nMentor junior engineers and support technical excellence across the wider team. \n\nAbout You\n\nWe're looking for an experienced OHL engineer who combines strong technical capability with the ability to inspire confidence in clients and colleagues alike.\n\nEssential skills and experience:\n\nDegree in Electrical or Civil Engineering (or equivalent technical discipline).\nChartered Engineer status (CEng) or working towards it, ideally via the IET.\nProven experience delivering overhead line projects up to 400kV.\nKnowledge of UK transmission system design standards and safety regulations.\nStrong communication, client engagement, and leadership skills. \n\nDesirable:\n\nExperience with transmission system operators (e.g. National Grid).\nLCDAE & CDAE certifications. \n\nWhy Join My Client?\n\nThis is an opportunity to join a forward-thinking organisation at the heart of the UK's energy transition. You'll work on landmark projects, collaborate with industry experts, and help shape the future of sustainable power transmission.\n\nIf you're ready to take the next step in your career and make an impact on the UK's clean energy future - I'd love to hear from you.\n\nApply today and power up your next career move.\n\nWe are an equal opportunity employer and value diversity in our company. We do not discriminate on the basis of race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status

Ready to find the right role for you?\n\nSalary: Competitive plus a 15% bonus and Veolia benefits\n \nGrade: 5.1\n \nHours: 33.6 hours per week, 12hr shifts days & nights \n \nLocation: Tyseley Energy Recovery Facility\n \nJames Road,\n \nBirmingham \n \nB11 2BA\n\nWhen you see the world as we do, you see the chance to help the world take better care of its resources and help it become a better place for everyone. \n\nAs a Shift Engineer you'll be pushing for innovative solutions to create a more sustainable future for all. We know that everyone here at Veolia can help us work alongside our communities, look after the environment, and contribute to our inclusive culture.\n\nWhat we can offer you;\n\n25 days of annual leave plus bank holidays\n \nAccess to our company/people's pension scheme\n \nDiscounts on everything from groceries to well known retailers\n \nAccess to a range of resources to support your physical, mental and financial health; so you can lean on us whenever you need to\n \n24 hour access to a virtual GP, 365 days a year, for you and family members in your household\n \nOne paid days leave every year to volunteer and support your community \n \nOngoing training and development opportunities, allowing you to reach your full potential\n\nWhat you'll be doing; \n\nLeading and managing a shift team to ensure the efficient and safe operation of the Energy Recovery Facility (ERF) and Clinical plant and equipment, adapting to operational demands as required\n \nFulfilling the role of Control Person, ensuring all contractors and maintenance teams are safely set to work in full compliance with Veolia ERF Safety Rules and site Environmental Permit requirements\n \nActing as the designated Senior Authorised Person during planned Plant Outages, representing the site management team in an out-of-hours capacity\n \nDriving the training, mentoring and development of shift staff, equipping them with the skills and knowledge needed for future career progression\n \nMaintaining accurate statutory and statistical records in line with Company Procedures and Policies, whilst liaising closely with maintenance teams to ensure efficient work scheduling and planning\n\nWhat we're looking for;\n\nRelevant electro-mechanical or power engineering qualifications are essential for this role\n \nA proven leader with strong people management skills and a demonstrable ability to coach, mentor and develop individuals within a high-performance operational environment\n \nPrevious experience working within an Energy from Waste facility, power station or similar electro-mechanical/power engineering setting is highly desirable\n \nAn unwavering commitment to health, safety and environmental compliance, with a no-compromise approach to maintaining the highest standards on site\n \nPrior experience working within a shift rota environment, with a clear understanding of the demands and responsibilities this brings\n \nStrong IT literacy, with working knowledge of Google Docs and Microsoft Office products, alongside a solid understanding of relevant industry legislation\n\nWhat's next?\n\nApply today, so we can make a difference for generations to come.\n\nWe're proud to have been named as one of The Sunday Times Best Places to Work for three consecutive years in 2023, 2024 and 2025. This consistent recognition reflects our commitment to our people, demonstrating that Veolia is not just transforming the environment, we're also transforming what it means to have a rewarding, purposeful career. \n\nWe're dedicated to supporting you throughout your application journey, offering adjustments where reasonable and appropriate. As a proud Disability Confident Employer, we will offer an interview to applicants with a disability or long-term condition who opt-in to the Disability Confident scheme, and meet the minimum criteria for our roles. \n\nWe're also committed to ensuring that all applicants and colleagues receive fair treatment without discrimination on any grounds, aiming to create a diverse and inclusive workplace where everyone can thrive.\n\nIf you are successful in securing a new role or promotion within the company, any offer to you may be subject to the acceptance of standardised terms and conditions. These new terms and conditions may differ from your current contract, if you have any questions about how this might affect you, please don't hesitate to contact your line manager or the HR team.\n\nJob Posting End Date:\n\nWhat's next?\n\nApply today, so we can make a difference for generations to come.\n\nWe're proud to have been named as one of The Sunday Times Best Places to Work for three consecutive years in 2023, 2024 and 2025. This consistent recognition reflects our commitment to our people, demonstrating that Veolia is not just transforming the environment, we're also transforming what it means to have a rewarding, purposeful career. \n\nWe're dedicated to supporting you throughout your application journey, offering adjustments where reasonable and appropriate. As a proud Disability Confident Employer, we will offer an interview to applicants with a disability or long-term condition who opt-in to the Disability Confident scheme, and meet the minimum criteria for our roles. \n\nWe're also committed to ensuring that all applicants and colleagues receive fair treatment without discrimination on any grounds, aiming to create a diverse and inclusive workplace where everyone can thrive

Senior Cable Design Engineer (HV / EHV) Remote or Hybrid\n\nTransmission & Distribution Projects\n\nSalary: £dependent on experience + benefits\n\nLocation: Remote / Hybrid (with occasional site travel)\n\nType: Full-time\n\nThe Opportunity\n\nARCA Resourcing is partnering with a specialist engineering business delivering complex transmission and distribution projects across the UK. With increasing demand across HV and EHV cable systems, the business is investing in its in-house design capability. This hire will play a key role in delivering technically robust cable designs and shaping future design standards within the organisation.\n\nThis isn’t just a design role, it’s a chance to influence how projects are engineered and delivered.\n\nRole Overview\n\nYou’ll take ownership of HV/EHV underground cable system design from concept through to detailed design and construction support.\n\nWorking across multidisciplinary teams, you’ll ensure solutions are technically sound, buildable, and aligned to programme and commercial constraints - while acting as a key technical interface with clients and stakeholders.\n\nKey Responsibilities\n\nCable System Design\n\n * Deliver HV/EHV cable system designs (typically 33kV–400kV)\n\n * Undertake cable sizing, selection, and system configuration\n\n * Produce detailed design packages including drawings, layouts, and specifications\n\n * Define cable routes, installation methods, and system layouts\n\nElectrical Design & Calculations\n\n * Perform and review key cable calculations including ampacity (CYMCAP, thermal modelling, and short-circuit ratings\n\n * Carry out sheath bonding and induced voltage calculations, assess losses, EMF, and overall system performance\n\n * Ensure designs meet performance, safety, and reliability standards\n\nInstallation Engineering\n\n * Develop installation methodologies for cable systems\n\n * Assess pulling tensions, sidewall bearing pressures, and installation constraints\n\n * Define requirements for trenching, ducting, HDD, or tunnelling\n\nSurvey Definition & Integration\n\n * Define survey requirements (topographical, PAS128, GI, environmental)\n\n * Review and interpret survey outputs to inform routing and constructability\n\n * Identify gaps or risks in survey data and specify further requirements\n\n * Ensure survey data is fully integrated into design outputs\n\nTechnical Compliance & Assurance\n\n * Ensure compliance with National Grid, DNO, IEC, and BS standards\n\n * Support technical assurance processes, design reviews, and approvals and ensure alignment with CDM and regulatory requirements\n\nProject & Stakeholder Coordination\n\n * Work closely with civil, structural, and construction teams\n\n * Align design outputs with programme and delivery constraints\n\n * Act as a technical interface with clients, including National Grid and DNOs\n\nMentoring & Capability Building\n\n * Support and mentor junior engineers and designers\n\nEssential skills\n\n * Strong experience in HV/EHV underground cable design (33kV–400kV)\n\n * Proven track record delivering full cable design packages (concept → construction)\n\n * Experience working on National Grid and/or UK DNO projects\n\n * Strong capability in cable installation engineering and associated calculations\n\n * Proficiency in tools such as CYMCAP, Cableizer, AutoCAD (or equivalent)\n\nDesirable skills\n\n * Degree in Electrical Engineering (or related discipline)\n\n * Chartered Engineer status (or working towards)\n\n * Experience supporting construction or commissioning phases\n\n * Experience in trenchless installation methods (HDD, microtunnelling)\n\nDevelopment & Progression\n\nThis role offers a clear route into Lead or Principal Engineer level, with increasing responsibility across technical leadership, design governance, and client engagement.\n\nFor more information, please apply via the link below for immediate consideration

We are recruiting for a Civil Design Engineer to work on the designs of railway assets on a large rail project in Birmingham. \n\nJob Requirements:\n\nProduce design deliverables, including drawings, reports, and specifications, in line with applicable Railway Group and Network Rail standards, as well as client requirements.\nCollaborate with construction teams to ensure designs are practical, buildable, and deliver value for money.\nWork closely with the wider design team to maintain consistency and quality across all project deliverables.\nDevelop and implement efficient, innovative, and value-driven design solutions that meet both technical and project requirements.\nPrepare and review engineering designs and calculations.\nProduce and verify technical documents and reports.\nEnsure compliance with all relevant health, safety, and environmental legislation, with particular focus on CDM Regulations.\nProvide project administration support to the Project Manager, including monitoring programme delivery, resources, and budgets.\nCarry out checks to ensure compliance with the Integrated Management System and contribute to its ongoing development.\nDemonstrate the ability to work independently, supervise others, review and approve work, and sign off design certificates on behalf of the company.\nUndertake conceptual, outline, and detailed design of engineering solutions, including the presentation of design options.\nDeliver work in accordance with agreed programme, budget, and specification.\nMaintain effective communication with clients and third parties

Location: England – West Midlands\nWe are seeking an experienced Design Engineer to support our client in delivering 400kV high-voltage substation design projects, playing a key role in shaping the future of the UK’s energy infrastructure.\nWhat You’ll Be Doing\n * Design substations in line with client requirements, budgets, and project timelines\n * Support tender submissions, contract documentation, and preparation of technical drawings\n * Collaborate closely with internal teams and clients to ensure efficient project delivery\n * Undertake regular site visits and maintain strong coordination with operations teams\n * Mentor and support junior engineers and CAD technicians\n * Participate in design reviews and contribute to continuous improvement initiatives\n * Ensure compliance with safety, quality, and environmental standards (OHSAS 18001, ISO9001, ISO14001)\n * Communicate effectively and professionally with stakeholders at all levels\nWhat You’ll Bring\n * Degree or HND in Electrical/Electronic Engineering\n * Minimum 5 years’ experience in power transmission and substation design\n * Strong knowledge of National Grid standards, British Standards, and UK design regulations\n * Proficiency in 2D CAD software (Autodesk preferred)\n * Ability to quickly adapt to new engineering tools and systems\n * Experience with NGET Stage 4.4 design and earthing systems up to 400kV\n * Understanding of related disciplines including overhead lines, civil design, protection & control, and HV cables\nDesirable\n * MSc or Chartered Engineer status\n * Expertise in CDEGS, AutoCAD, and power system analysis tools

Geotechnical Engineer\n\nLocation: Birmingham\n\nPermanent Opportunity\n\n£32000 to £38000 per Annum\n\nWe are looking for a talented Geotechnical Engineer to join a growing and collaborative engineering team based in Birmingham. This is an exciting opportunity for a Geotechnical Engineer with experience in either ground investigation or geotechnical design to work on a wide variety of projects across the UK.\n\nAs a Geotechnical Engineer, you will play a key role in delivering practical, high-quality engineering solutions. The role in Birmingham offers strong career progression, hands-on project involvement, and support from experienced professionals.\n\nKey responsibilities:\n\nInterpret ground investigation data and produce clear, concise reports\nUndertake geotechnical design including foundations, retaining structures, and earthworks\nLiaise with clients, contractors, and multidisciplinary teams\nSupport site activities and ensure technical quality\nContribute to innovative and cost-effective engineering solutionsAbout you:\n\nExperience as a Geotechnical Engineer or in a related field\nBackground in ground investigation or geotechnical\nLive within a commutable distance of Birmingham\nFull right to work in the UK permanentlyCompany Benefits:\n\nFlexible working\nHybrid working\nFull chartership support\nProfessional Memberships\nGenerous holiday allowance\nEnhanced pension schemeThis Geotechnical Engineer position in Birmingham is ideal for someone looking to develop their expertise within a supportive and forward-thinking environment. You will gain exposure to diverse projects while building a long-term career as a Geotechnical Engineer.\n\nInterested in this or other roles in Geotechnical or Geo-Environmental, please do not hesitate to contact William Lisle at or call (phone number removed). We have many more vacancies available on our website.\n\nThis is a permanent role. Penguin Recruitment is operating as a Recruitment Agency in respect to this position

Job Title: Lead Civil Engineer\n\nRate: £50 - £60 per hour (dependent on experience)\n\nLocation: Birmingham / Glasgow / Chester / Leeds (Flexible UK base / hybrid)\n\nType: Contract - Inside IR35, Hybrid\n\nAbout the Role:\nOur client is seeking Lead Civil Engineers to join their Delivery group, working on non-infrastructure UK water engineering projects. You will act as a technical specialist and/or in a lead role, developing and applying advanced engineering techniques, while guiding project teams to deliver high-quality outputs.\n\nAbout the Client:\nOur client is part of a global engineering and environmental group, delivering projects in over 100 countries. They combine innovation, sustainability, and technical excellence, offering employees opportunities to work on exciting projects worldwide while supporting flexible and hybrid working patterns in the UK.\n\nKey Responsibilities:\n\nProvide guidance on design guides, standards, systems, and engineering codes. \nPrepare calculations and develop civil engineering deliverables (models, drawings, reports) within budget, schedule, and quality standards. \nMentor and develop junior staff while promoting continuous improvement. \nCoordinate with internal and external teams on complex projects. \nDevelop recommendations for materials, construction techniques, and project specifications. \nServe as a technical specialist providing advice and guidance to project teams. \nEnsure compliance with all health & safety duties of designers. \n\nWhat Our Client is Looking For:\n\nCivil Engineering design and/or hydraulics/structural background. \nExperience in design and build, particularly non-infrastructure water/wastewater treatment works. \nProven ability to lead and manage a multidisciplinary team (civil, structural, geotechnical, hydraulics). \nStrong interpersonal skills to interface across disciplines and deliver engineering outputs efficiently. \n\nWhat Our Client Offers:\n\nFlexible, hybrid, part-time, and remote working patterns. \nExposure to international-scale projects across multiple sectors. \nSupportive and inclusive culture with career development opportunities. \nMentorship and training to enhance technical and leadership skills. \n\nEligibility:\nCandidates must be legally able to work in the UK and hold relevant engineering qualifications and experience.\n\nOpportunity for Growth:\nThis is a chance to advance your career in a respected, international engineering group, gain exposure to complex projects, mentoring opportunities, and potential pathways into permanent roles or further leadership responsibilities.\n\nWe are an equal opportunity employer and value diversity in our company. We do not discriminate on the basis of race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status

Mechanical Maintenance Engineer | Birmingham\n\nSalary: £52,000 + Overtime\n\nShifts: Continentals (Other shifts available – apply to discuss)\n\nAre you a proactive engineer with a "right first time" mindset? Due to significant site expansion, a leading international manufacturing giant is looking for several Mechanical Maintenance Engineers to join their Birmingham-based team.\n\nThis is a high-impact role within a heavy industry environment where your expertise in CNC equipment, hydraulics, and pneumatics will directly contribute to the site's continued growth and efficiency.\n\nThe Role\n\nWorking within a culture of continuous improvement, you will be a key player in the development and upkeep of both new and established machinery. This is a varied, hands-on role based on the shop floor, encompassing preventative, corrective, and reactive maintenance.\n\nKey Responsibilities:\n\n * Perform routine and non-routine maintenance across the plant and facilities.\n\n * Maintain a wide range of mechanical equipment, including Manual Lathes, Millers, Planers, and Bar Peelers.\n\n * Troubleshoot and repair complex Hydraulic and Pneumatic systems.\n\n * Participate in root cause analysis and problem-solving to drive long-term reliability.\n\n * Collaborate with production teams to minimize downtime and enhance productivity.\n\n * Ensure strict adherence to health, safety, and environmental standards.\n\nWhat We Are Looking For\n\nEssential:\n\n * Qualifications: Minimum ONC or NVQ Level 3 (or equivalent) in Mechanical Engineering.\n\n * Experience: Proven track record in maintaining machine tools (Manual or CNC).\n\n * Environment: Experience in heavy industry (e.g., metal, presswork, or CNC manufacturing) is highly preferred.\n\n * Technical Skills: Strong fault-finding abilities and hands-on experience with hydraulics and pneumatics.\n\n * Soft Skills: A dynamic team player with a proactive attitude toward preventative maintenance.\n\nDesirable:\n\n * Skilled in fitting, machining, and welding.\n\n * Experience in gearbox disassembly and rebuilds.\n\nWhy Join Us?\n\nThis is an opportunity to join a global leader that values innovation and invests in its people. Beyond a competitive base salary of £52,000, you will have access to overtime and the stability of working for a growing international business.\n\nNote: The individual must be comfortable working in a physically demanding, heavy-industry environment that requires high attention to detail and strict safety compliance.\n\nApply Today\n\nDemand for these positions is high, and interviews are being arranged immediately.\n\nTo apply, please click "Apply Now" or contact Clayton Cruise at Cruise Control Recruitment.\n\nCruise Control Recruitment – Global Partners in Engineering Talent Solutions.\n\nWe are an equal opportunities employer and welcome applications from all suitable candidates

Our client is one of the worlds leading Ground Engineering contractors and due to a number of large scale projects won, they are seeking an experienced Piling Project Manager. They offer Hybrid working with this role, however the project will be based around the Midlands therefore you must be able to speand a 2 - 3 days a week on site. As part of their global community of experts, you will be working on some of the world’s most exciting engineering projects.\n\nYour Role;\n\n- Act as the Project and Engineering management lead ensuring design and quality compliance.\n\n- Act as overall lead for Health, Safety, Wellbeing and Environment on site(s)\n\n- Develop and maintain customer, engineer and stakeholder relationships.\n\n- Understand the design intent and requirements and ensure construction is proceeding in accordance with both.\n\n- Maintaining records and dialogue with the designer regarding any variations.\n\n- Be responsible for day to day commercial management in collaboration with commercial team\n\n- Produce and maintain method statements, risk assessments and ITPs\n\n- Work collaboratively with BW and all other business functions to deliver ‘best for business’ outcomes\n\nAbout the candidate;\n\nfor Degree level qualification in a Civil Engineering subject or HND in Civil Engineering and vocational training in Engineering\n\n- Proven experience in a Senior project management role within piling disciplines such as rotary bored, CFA, Minipiling and associated works.\n\n- Solid understanding of Ground Engineering and Piling principles with detailed technical knowledge of construction techniques and best practice.\n\n- Health, safety & wellbeing and environmental management experience to current standards CEng MICE (desirable)\n\n- Relevant CSCS card\n\nFULL BENEFIT PACKAGE AND VERY COMPETITIVE SALARY OFFERED

SRT Marine Systems plc (SRT) is a market leader in the domain of international marine surveillance technology and systems. We are a respected, established, and an ambitious multi-national company headquartered in the UK with a global customer base.\n\nThe company has a worldwide impact in the marine sector by leading the next generation of maritime domain awareness technologies "MDA", products, and systems that significantly enhance security, safety, environmental protection, and sustainability. Our customers are global and range from the largest national coast guards to individual vessel owners.\n\nSRT is an exciting company where high-quality results are rewarded. We are ambitious and constantly seek to innovate in order to deliver better products and services to our customers. We strive to make SRT a rewarding and challenging place to work, where talented, hard-working individuals have the opportunity to make a real impact across the marine industry.\n\nRole overview of our Electrical Systems Project Engineer\n\nWe are seeking an experienced Electrical Systems Project Engineer to provide in-person and remote support to our field installation teams and subcontractors. Your role as an Electrical Systems Project Engineer will be to create, review and check electrical installation schematics and plans for a wide variety of equipment ranging from a maritime surveillance radar to a genset or CCTV security and building monitoring systems, along with hands-on electrical installation configurations.\n\nPlease note: The role of Electrical Systems Project Engineer is a role where you will travel globally for our projects, whether this is the Middle East, Far East, South East Asia, Africa's region - you will be expected to travel and live in country with an agreed rotation period up to 12 weeks in-country, 2 weeks home.\n\nResponsibilities (not exhaustive):\n \nReview and approve proposed electrical installation configurations for a variety of equipment that rely upon electrical utility and power systems \nPhysically oversee and or undertake installations with a "hands-on" approach and involvement \nTrain and coach field engineering teams to ensure high quality and consistent workmanship \nHelp build and maintain standard work procedures and standards \nReview equipment installations, identify issues and propose / rectify remedial work \nWhere relevant, deeply understand equipment installation and configuration requirements to enable correct commissioning \nEnsure all installations comply with technical standards, safety protocols, and project specifications \nConduct system testing, troubleshooting, and maintenance to ensure optimal performance of all integrated systems \nDocument installation procedures and generate detailed reports for project stakeholders \nHelp to devise and define long term maintenance programs that ensure systems and equipment are operate optimally and reliably \n\nRequirements\n \nESSENTIAL - Qualification: Time served apprenticeship or QBE with holding a minimum 17th Edition \nProven experience in electrical installations - for example integrated CCTV and building monitoring systems, building power systems and or communication towers \nStrong understanding of electrical standards, safety regulations, and networking fundamentals \nAbility to read and interpret electrical schematics, server rack layouts, and technical drawings, schematics, standards and specifications \nExcellent problem-solving skills and attention to detail \nMobile Platforms (e.g. onboard vessels, mobile command units, aerospace) \nAppreciation of cultural differences in overseas territories and ability to communicate well with overseas colleagues \n\nThe role encompasses both our MDA System and the physical building electrical infrastructure.\n\nBenefits of the Electrical Systems Project Engineer\n \nHighly competitive salary, fantastic accommodation and flights IAW company policy \nMatched company pension contributions up to 5% \nDevelopment opportunities \n\nSRT Marine Systems plc are an equal opportunity employer. We are committed to creating an inclusive working environment for all employees and actively encourage applications from all sectors of the community

Job Title: Geo-environmental Engineer\nSalary: £30,000 - £35,000\nLocation: Birmingham\n\nIf you are a geo-environmental engineer or come from a ground investigation company, looking to join a huge set up to work on large, exciting projects, then this is the perfect for you! Please read below:\nThis is a high level opportunity for a Birmingham based geo-environmental engineer to join one of the UK's leading engineering consultancies with a huge reputation in the geotechnical industry and take your career to the next level. The projects are exciting and the work conditions are excellent.\n\nGeo-environmental Engineer package:\n* Excellent salary £30,000 - £35,000\n* Generous pension scheme\n* Fantastic working conditions \n* Flexible benefits\n* Close support from seniors\n* Wide range of projects\n* Birmingham office\n\nThis Birmingham based opportunity offers typical geo-environmental engineer office and site duties, such as interpretive report writing and risk assessing, so you must have UK experience in this field, as well as a full driving licence and the right to work permanently in the UK.\n\nInterested in this or other geo roles? Please do not hesitate to contact Joel Bullen on (url removed). We have many more vacancies available on our website. This is a permanent role.\nPenguin Recruitment is operating as a Recruitment Agency in respect to this position

Graduate Civil Engineer\n\nBirmingham\n\nPermanent Role\n\nSalary: £26000 to £29000 per Annum\n\nWe are seeking a Graduate Civil Engineer to join an established civil and geotechnical consultancy based in Birmingham. This is an excellent opportunity for a recent graduate to begin their career within a design-focused environment, working on a wide range of infrastructure and development projects.\n\nAs a Graduate Civil Engineer, you will support the delivery of geotechnical designs, calculations, and technical reports under the guidance of experienced engineers. The role offers exposure to foundation design, earthworks, retaining structures, and ground improvement solutions.\n\nThis Graduate Civil Engineer role is ideal for someone with a strong academic background, an interest in engineering design, and a desire to develop practical and analytical skills within a collaborative consultancy setting in Birmingham.\n\nKey responsibilities\n\nAssisting with geotechnical design calculations and analysis\nSupporting the preparation of technical reports and drawings\nInterpreting ground investigation data and laboratory results\nCollaborating with engineers, technicians, and project managers\nDeveloping an understanding of relevant standards and best practiceThis Graduate Civil Engineer position offers competitive remuneration, structured training, and clear opportunities for career progression within a respected consultancy environment.\n\nCompany Benefits:\n\nCompany vehicle access\nPension scheme\nInternal and external training schemes\nClear progression path\nFlexible working\nGenerous holiday allowance\nChartership support \n\nCandidate Requirements:\n\nFull UK Driving Licence\nBackground within Geology/Earth Sciences/Civil Engineering\nFull Right to Work in the UK permanently \n\nInterested in this or other roles in Geotechnical or Geo-Environmental, please do not hesitate to contact William Lisle. We have many more vacancies available on our website.\n\nThis is a permanent role. Penguin Recruitment is operating as a Recruitment Agency in respect to this position

Job Title: Principal M&E Surveying Engineer\n \n Location: Birmingham (with nationwide travel) Employment Type: Full-Time\n \n Role Overview\n \n We are seeking an experienced Principal M&E Surveying Engineer to lead the delivery of comprehensive asset capture, lifecycle, condition, and dilapidation surveys. The successful candidate will act as a key technical lead, interfacing with a diverse range of clients, consultants, and construction partners to deliver high-quality project outcomes.\n \n Key Responsibilities\n \n Technical Delivery: Execute technical services to ensure projects are delivered on time, within scope, and to the highest quality standards.\n \n Team Leadership: Lead and manage multi-site survey commissions simultaneously. As the department scales, take on departmental leadership duties, including mentoring and developing graduate/junior surveyors.\n \n Site Surveying: Conduct on-site mechanical and electrical inspections. Record asset conditions and identify defects using specialist tablet-based software.\n \n Data Analysis & Reporting: Review existing maintenance and servicing records to inform accurate condition grading. Produce detailed, high-quality technical reports.\n \n Relationship Management: Liaise effectively with clients, professional bodies, contractors, and internal stakeholders.\n \n Versatility: Work autonomously on smaller, specialized projects or lead larger teams on complex commissions.\n \n Scope of Surveys\n \n You will be responsible for a variety of survey types across sectors including Healthcare, Education, Hospitality, and Commercial real estate:\n \n Asset Capture & Lifecycle: Identifying and grading all existing assets and prioritizing remedial works.\n \n Planned Preventative Maintenance (PPM): Developing 5–10 year maintenance budget projections.\n \n Defect & Dilapidation: Managing latent defect inspections and end-of-tenancy/lease dilapidation assessments.\n \n Environmental Validation: Performing testing (lighting lux, acoustics, ventilation, thermal performance, water services) to verify M&E systems against contract specifications and room data sheets.\n \n Required Skills & Experience\n \n Qualifications: HNC/HND or City & Guilds qualification in Mechanical or Electrical Engineering.\n \n Surveying Experience: Proven track record as a Senior/Principal M&E Surveyor, with experience in project delivery, team coordination, and client-facing progress meetings.\n \n Technical Knowledge: Strong understanding of British Standards, building regulations, and current M&E design/installation best practices.\n \n Communication: Excellent written and verbal communication skills; capable of producing precise, professional technical reports.\n \n Tech Proficiency: High level of IT literacy (Microsoft Office Suite). Experience with tablet-based surveying software (e.g., GoReport) is highly advantageous.\n \n Leadership: Demonstrated experience in training, mentoring, and developing junior staff.\n \n Working Conditions\n \n Flexibility: This role requires regular travel across the UK, including overnight stays (fully expensed).\n \n Initiative: Ability to work proactively under pressure and meet tight project deadlines, whether working alone or as part of a team

Legionella Risk Assessor - £35,000-£40000 + Company Vehicle + Fuel + Benefits\n\nLeading environmental water consultancy who specialise in commercial sites across the UK are specifically looking for a Legionella Risk Assessor to cover sites in the Midlands. The Legionella Risk Assessor role comes with specific training but ideally the successful applicant will have the following working knowledge\n\n * 4 years working as a Legionella Risk Assessor for a water consultancy\n\n * Previous knowledge in Water Hygiene or Water Treatment\n\n * A thorough understanding of ACOP L8 and HSG 274\n\n * Be within the Midlands\n\n * Have experience working on commercial and residential locations\n\n * Duties experience including – Inspecting water systems for legionella bacteria, producing comprehensive risk assessments, providing clients with guidance for current/further work, training/guiding junior engineers and assessors.\n\n * Hold a full driving license\n\n * Hold a City & Guilds (or similar) in Risk Assessment beneficial\n\nWorking to a 40-hour week, our client has unlimited overtime available (optional), ensures all staff are allocated time to write up reports, plus a company vehicle (private use), fuel card and a structured career path for personal development.\n\nFor more information, please email Nick Lewis with a copy of your CV\n\nSimilar job titles and keywords - Water Hygiene Technician, Water Treatment Technician, Legionella Compliance Technician, Legionella Consultant, Water Monitoring Technician, Legionella Technician, Legionella Surveyor, Water Risk Assessor, Water Systems Assessor, Environmental Risk Assessor, Water Treatment Engineer, Cooling Tower Specialist, Plumber, Water Hygiene Technician\n\nCommutable Locations - Birmingham, Leicester, Nottingham, Coventry, Stoke-on-Trent, Wolverhampton, Derby, Northampton, Lincoln, Dudley

Electronic / Hardware Engineer\n\nContract: 6 months, Outside IR35, 2 days a week on-site \n\nResponsibilities:\n\nDesign and develop analogue and digital electronic circuits for sonar and subsea systems\nDevelop mixed-signal hardware including sensor interfaces, signal conditioning, ADC/DAC stages\nDesign low-noise, high-sensitivity electronics for acoustic and underwater sensing applications\nWork across full product lifecycle from concept, schematic design, PCB layout through to prototype, test and production\nIntegrate hardware with embedded software and real-time processing systems\nConduct lab-based debugging, validation and performance testing of electronic systems\nSupport environmental testing for subsea deployment (pressure, temperature, vibration, corrosion)\nProduce technical documentation including schematics, design reports, and test proceduresEssential Skills:\n\nExperience with mixed-signal electronics and sensor interfacing\nPCB design experience using tools such as Altium or OrCAD\nUnderstanding of embedded systems and hardware/software integration\nHands-on experience with lab test equipment (oscilloscopes, spectrum analysers, logic analysers)\nStrong understanding of signal integrity and low-noise design techniques

Excellent opportunity for an experienced Production Engineer to join a well-established company based in Birmingham\n\nSalary: £40,000 – £45,000\nType: Full-time, Permanent\nLocation: Birmingham (B11)\n\nAbout the Role\n\nThe company is a UK-based manufacturer at the forefront of sustainable, reusable drinkware. They are growing and investing in their production capability, creating an opportunity for a hands-on Production Engineer to play a key role in shaping how they manufacture and innovate.\n\nThis is a high-impact role in a small, agile team, offering real variety and ownership. You’ll work across multiple production technologies and be directly involved in improving processes, solving problems, and bringing new ideas to life.\n\nIf you enjoy practical engineering, autonomy, and seeing your work translate into real products, this role offers exactly that.\n\nWhat You’ll Be Doing\n\nYou will take ownership of key production equipment and contribute to continuous improvement across the factory:\n\n * Set up and initiate production runs across multiple machine types\n\n * Maintain and optimise machinery, implementing preventative solutions\n\n * Diagnose faults and carry out hands-on repairs\n\n * Identify and resolve production bottlenecks\n\n * Design and develop new equipment, tooling, or components\n\n * Source, purchase, and install new machinery\n\n * Plan and manage maintenance schedules\n\n * Support R&D activity and maintain clear technical records\n\nEquipment You’ll Work With\n\n * Injection moulding machines\n\n * CNC screen printing machines\n\n * Rotary digital printing machines\n\nFull training will be provided where required.\n\nWhat We’re Looking For\n\n * Experience in a production or manufacturing engineering environment\n\n * Strong mechanical aptitude and practical problem-solving ability\n\n * Proactive, self-motivated approach\n\n * Clear communication skills and ability to work within a small team\n\nDesirable (Not Essential)\n\n * Injection moulding experience\n\n * Understanding of machine electrics\n\n * CAD/CAM capability\n\nWhy Join First Editions\n\n * Work on innovative, sustainable products including the Foamo Coffee Cup\n\n * Be part of a UK manufacturing success story supplying leading brands\n\n * Gain exposure to a wide range of engineering challenges and technologies\n\n * Operate in a flexible, low-bureaucracy environment where ideas are implemented quickly\n\n * Contribute directly to reducing environmental impact through product design and manufacturing\n\nIf you have the relevant skills/attributes to fulfil this role then please apply now for immediate consideration.\n\nThe employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need

Job Title: Fire Damper Engineer\n\nLocation: Birmingham, West Midlands\n\nSalary/Benefits: £26k - £40k DOE + Training & Benefits\n\nWe are recruiting on behalf of a growing company who specialises in Fire Damper services based in the West Midlands. They are seeking a tremendous Fire Damper Engineer, who can inspect, test and complete remedial works to Fire Dampers with completing work reports. This company is flexible and can consider candidates from other areas as long as they are happy to travel and have a Fire Damper Testing qualification. And can offer considerable benefits such as long-term training and career development with attractive salaries and many other benefit packages for a hardworking Fire Damper Engineer.\n\nApplicants can be considered from: Solihull, Coventry, Dudley, Nuneaton, Coventry, Kidderminster, Wolverhampton, Telford, Stafford, Royal Leamington Spa, Northampton, Leicester, Loughborough, Derby, Nottingham, Stafford, Worcester, Banbury, Redditch, Stourbridge, Rugby, Lutterworth, Cannock, Rugeley, Leicester, Market Harborough, Daventry, Droitwich Spa, Bromyard, Stafford-upon-Avon\n\nExperience / Qualifications:\n\n * Hands on experience as a Fire Damper Engineer\n\n * Fully conversant in BS9999 guidelines\n\n * Attention to detail\n\n * Great literacy, numeracy and IT skills\n\n * Obtained Fire Damper Testing qualification\n\n * Working to agreed deadlines and personal targets\n\nThe Role:\n\n * Performing thorough fire damper inspections and drop testing\n\n * Maintaining fire dampers\n\n * Completing pre and post work reports\n\n * Evaluating overall performance of systems\n\n * Advising and recommending to clients\n\n * Kitchen extract, canopy and ductwork cleans\n\n * Installing access doors and panels\n\nAlternative Job titles: Fire Damper Technician, Fire Technician, Air Hygiene Engineer, Fire Damper Remedial Engineer, Fire Damper Tester, Fire Damper Inspector, Ventilation Engineer, Smoke Ventilation Engineer, Fire Ventilation Engineer.\n\nFuture Select are recruiting in the Compliance / Environmental industry, including: LEV / Critical Air / Clean Air / Air Hygiene / Fire Safety; we work with the best clients & candidates and supply the majority of permanent jobs in the market.\n\nWe would be interested in speaking to candidates with experience in any disciplines from Risk Assessors, Service Engineers, Account Managers and Business Development/Operational Managers through to Director level.\n\nFuture Select Copyright 2026

Are you an Intermediate Electrical Design Engineer who would be interested in a challenging yet exciting role with plenty of variety? If the answer is YES, I may just have the perfect role for you!\n\nAs demand for my clients services continues to grow, they are now in the very envious position of looking to expand their already very talented and hardworking electrical team, with an Intermediate/Senior Electrical Design Engineer to work in their Birmingham office and help deliver innovative solutions for their client's.\n\nThere diverse projects will provide the opportunity to evolve your engineering skills. Working across the full spectrum of RIBA deliverable stages for new and refurbished facilities.\n\nThe team structure ensures quality mentoring and coaching, synchronised to your development as you grow your knowledge and working experience\n\nTheir projects cover all sectors of the construction industry creating great insight to cross pollination of ideas and solutions allowing you to re-think standards and deliver quality engineered responses.\n\nWhat you need to do to be effective in this role\n\n· Working as part of a design team delivering detailed designs\n\n· Proven experience in electrical design within a consultancy or similar environment, including a strong portfolio of delivered projects\n\n· Knowledge of relevant standards, codes, and regulations (e.g., BS 7671, Building Regulations)\n\n· Ideally knowledge of design software such as AutoCAD, Revit, and calculation tools (e.g., Electrical -OM, Amtech, Dialux)\n\n· Designing site-specific equipment as required\n\n· Liaising closely with other design professionals, including structural engineers, architects, surveyors, and contractors of in-house and external project teams\n\n· Directly advising clients and architects on energy use and conservation in a range of buildings and sites, aiming to minimise the environmental impact and reduce the carbon footprint\n\nThe skills and experience you need to have for this role\n\nTo be successful in this role you will ideally have an accredited Building Services degree or higher educational qualification and experience in a similar role. Ideally chartered or working towards chartered engineer status with a suitable institution. You will need to be an excellent communicator who can articulate complicated issues between our clients and our highly skilled project teams. You will also need to show a willingness to learn whilst demonstrating a high-level diligence and organisational skills.\n\nThe client operates a CIBSE accredited mentor scheme for registration to the Engineer Council to obtain CEng\n\nThe client\n\nA built Environment Consultancy. They help their clients transform the quality and sustainability of the built environment.\n\nTheir 1,000+ people bring a vast range of skills, delivering a professional mindset, gritty discipline, and a genuine passion to every one of the thousands of projects they undertake each year. They’re the foundation of the comapny's success - they drive their vision, embody their values, and separate them from the competition

Senior Mechanical Design Engineer\n\nBirmingham\n\n£50k–£60k\n\nA growing building services consultancy based in Birmingham is looking to appoint a Senior Mechanical Design Engineer to join its expanding team.\n\nSpecialising in mechanical, electrical, and environmental design, the business delivers energy-efficient, sustainable solutions across a wide range of sectors, supporting clients on their journey towards net zero and future-ready buildings.\n\nThe role:\n• Lead the design and delivery of mechanical building services across sectors including commercial, residential, healthcare, and mixed-use\n• Take projects from concept through to detailed design and construction stages\n• Produce technical drawings, specifications, and reports using industry-standard tools\n• Carry out engineering calculations to ensure systems are efficient, compliant, and cost-effective\n• Integrate low and zero carbon technologies into design solutions\n• Collaborate with clients, architects, and project teams, clearly communicating technical concepts\n• Provide technical leadership and support coordination across disciplines\n\nDesirable:\n• Chartered or working towards Chartership (CIBSE, IMechE or similar)\n• Experience with low-carbon technologies and renewable systems\n• Knowledge of building performance modelling\n • Previous mentoring or leadership experience\n\nWhat’s on offer:\n• £50,000–£60,000 salary\n• Hybrid and flexible working\n• Generous holiday allowance + Christmas shutdown\n• Early finish Fridays\n• Pension, life assurance, and wellbeing support\n• Support with professional development and Chartership\n• Clear progression pathway within a growing consultancy\n • Additional benefits including cycle to work and EV schemes\n\nThis is a great opportunity to join a forward-thinking consultancy delivering high-quality, sustainable building solutions, with strong support for career progression.\n\nInterested? Get in touch to find out more. Please apply now or speak to Callum via

We currently have an opportunity for an Technical Design Coordinator to join our growing engineering team. This position within our civil engineering team will suit a committed and ambitious engineer who can demonstrate strong leadership and interpersonal skills combined with commercial awareness and the ability to play their part in growing a dynamic high-performance team. \nWith a focus on the design of High Speed rail infrastructure the will also support other Product Lines in the UK and overseas, the post-holder will be part of a growing team of UK engineers delivering projects for a diverse portfolio of UK clients. \nThe Technical Design Coordinator will be accountable for the design delivery of allocated civil engineering work packages, ensuring:\n\nDelivery of all the specified project outcomes on time, within budget and to the client's specifications\nProject requirements are fully met\nTechnically sound design solutions are produced, including all associated reporting and cost estimating, to programme and within budget\nCompliance with all relevant technical standards\nAdvice and guidance is provided for staff, and professional development is actively pursued\nGood relationships are maintained with all external parties to enhance the reputation of the company\nResponsibilities: \nWorking in collaboration with our designers and contract partners, the Senior Design Coordinator will be involved in a variety of tasks such as:\n\nAdopt a cost effective, high quality, safe and environmentally responsible approach to design, construction, commissioning and other technical activities on relevant projects, compliant with all relevant legislation.\nDevelop design deliverables (drawings, reports, specifications) in accordance with appropriate Railway Group, Network Rail Company standards and other client requirements\nLiaise with construction teams to ensure designs are buildable and represent value for money\nDevelop and maintain hazard / risk registers for allocated design packages.\nLiaise with wider design team to ensure consistency and quality of deliverables across all projects.\nImplement effective, value for money and innovative design solutions to meet technical and project requirements\nEnsure project requirements are effectively communicated to the team\nPrepare and check engineering designs, calculations, and manage design production\nPrepare and check technical documents and reports and assist in the preparation of expressions of interest and tenders\nEnsure compliance with relevant health, safety and environmental legislation, particularly the CDM Regulations\nProject administration reporting to the Project Manager including monitoring programme delivery, resources and budgets\nChecks to ensure compliance with the Integrated Management System and assist in its development\nWhen required, to undertake the roles of Contractors Responsible Engineer (CRE), Task Manager, Designer, Checker or Approver for all various types of civil design.\nCompetent to work unsupervised, competent to check and approve the work of others\nConceptual outline and detailed design of engineering solutions, presentation of engineering options.\nDelivery of work to programme, budget and specification.\nTraining and development, mentoring of junior staff.\nClient and third party liaison.\nDevelop a strong focused client relationship\nEffective management of and response to project related correspondence\nAssist and support the Design and Engineering Managers where required\nQualifications:\nExperience managing designs within infrastructure projects\nDegree qualified within Civil Engineering\nDemonstrable Civil Engineering design experience in the infrastructure industry

Principal Civil Engineer - Digital\n\nMott MacDonald is a global engineering, management, and development consultancy with over 20,000 employees across more than 50 countries and 140+ offices.\n\nWe work across incredible global industries, delivering exciting work that is defining our future and making an important societal impact in the communities we serve. Our people power our performance – we succeed when they do. With countless opportunities to collaborate, learn, and grow, the possibilities for excellence are as varied as every individual.\n\nWhether you want to grow as a subject matter expert or broaden your experience with roles across our international community, you’re surrounded by global specialists who want to combine their expertise and champion you to be your best. As a proudly employee-owned business, we benefit our clients, our communities, and each other, investing in creating the right space for everyone to feel empowered, included, and valued. Whatever your ambition, Mott MacDonald is where people come to be brilliant.\n\nAbout the business unit\n\nWe help conceive, drive, and implement transport solutions for cities, regions, and asset owners/operators around the globe. From preparing the business case and advising on related issues - such as revenue, procurement, and environmental legislation - to delivering the completed infrastructure and helping maintain it. Our planning, engineering, environmental and management skills cover the whole project cycle. We play a major role in developing and delivering the Global Transport Sector Strategy.\n\nOverview of role\n\nYou’ll be a senior member of the team, leading the growth and development of our Information Management capability within Birmingham office. You’ll be responsible for growth targets, pipeline of work, training and development of the team whilst promoting the capability and service offering of the Information Management account\n\nThe Information Management account is a team of 40+ digital consultants driving digital transformation on all our major projects, mostly based in Croydon and London with aspirations of increasing our footprint.\n\nOutside of the leadership responsibilities, you’ll act as project lead driving digital transformation on major infrastructure projects. You’ll be involved with the development of strategies, planning of processes and implementation of tools to improve major project delivery. Sometimes this might be working directly with our clients, other times this might be supporting our internal delivery projects.\n\nYou will be an advocate for digital ways of working, a promoter of good information management and comfortable working closely with our clients to share our experience.\n\nYour responsibilities will include (but are not limited to):\n\n * Successful management of the client relationship, managing feedback, managing scope change and client expectations\n\n * Responsible for ensuring that projects are delivered successfully for the client and for Mott MacDonald, technically, commercially, and financially\n\n * Growth and development of the Birmingham team\n\n * Leading the technical delivery of consultancy services\n\n * Delivery of a programme of technical solutions as agreed with the client\n\n * Compliance with the Mott MacDonald management, quality, safety and environmental system requirements\n\n * Coordinate and manage contract requirements (industry standard & bespoke contracts)\n\n * Identification and management of the project delivery teams\n\n * Maintaining knowledge of the latest industry and company best practice in digitally-enabled project delivery\n\nCandidate specification\n\nYou will be a seasoned Digital professional with experience in the delivery of multi-disciplinary projects from concept to construction. You understand the impact that information management and digital tools has on the design and construction phase of built environment projects. You understand the design process, design risk management, construction programming, tendering process and quality assurance management. You will need to have strong leadership qualities.\n\nYou will also be able to demonstrate the following:\n\n * A degree in Civil/ Structural Engineering (or equivalent)\n\n * Experience project managing multi-disciplinary projects, ideally within transport and using the ISO 19650 suite of standards\n\n * Appetite and experience of management, growth and development of teams\n\n * Familiarity with industry standard tools and technologies used during the delivery phase\n\n * Strong communication, team working and problem-solving skills\n\n * Strong stakeholder engagement and influencing skills\n\nWe are actively recruiting a diverse workforce that is reflective of the communities we serve. We recognise that differences in ability, skills and experience are a strength and encourage applications from people of all backgrounds\n\nUK Immigration\n\nMott MacDonald Ltd. are not currently offering sponsorship to candidates under the Skilled Worker visa route in the UK. This decision is as a consequence of the changes made to the Skilled Worker route by the UK Government in April 2024. We continue to welcome applications from candidates who are eligible for alternative immigration routes in the UK, that do not require sponsorship as a Skilled Worker now or in future.\n\nAgile working\n\nAt Mott MacDonald, we believe it makes business sense for you and your manager to choose how you can work most effectively to meet your client, team, and personal commitments. We offer a hybrid working policy that embraces your well-being, flexibility, and trust.\n\nEquality, diversity, and inclusion\n\nWe put equality, diversity, and inclusion at the heart of our business, seeking to promote fair employment procedures and practices to ensure equal opportunities for all. We encourage individual expression in our workplace and are committed to creating an inclusive environment where everyone feels they can contribute.\n\nAccessibility\n\nWe want you to perform your best at every stage in the recruitment process. If you are disabled or need any support to enable you to apply or attend an interview, please contact us and we will talk to you about how we can support you.\n\nWe offer some fantastic benefits including:\n\nHealth and wellbeing\n\nPrivate medical insurance for all UK colleagues.\n\nHealth cash plan to support you with every day health costs and treatments.\n\nAccess to Peppy, providing free support from menopause experts for all UK colleagues.\n\nA variety of wellbeing support is available through our comprehensive wellbeing program, including access for you and your family.\n\nAbility to flex your salary to opt into a wide range of health benefits, many of which can be extended to your family too.\n\nFinancial wellbeing\n\nWe match employee pension contributions between 4.5% and 7%.\n\nLife assurance equal up to 4 x your basic salary, with an option to increase the level of cover to 6 x your salary.\n\nOur income protection scheme provides a financial benefit, as well as absence and return to work support due to long-term illness or injury.\n\nFlexible benefits, including increased life assurance cover, critical illness insurance, payroll saving and will writing.\n\nAs an independently owned business we share the financial success of the business with all our colleagues in various ways including annual bonus schemes.\n\nLifestyle\n\nA minimum of 33-35 days holiday each year, inclusive of public holidays and dependent on level, with the ability to buy or sell leave through our flexible benefits programme.\n\nHoliday entitlement increased to a minimum of 35 days after 5 years’ service.\n\nVariety of employee saving schemes and discounts from high-street retailers.\n\nEnhanced family and carers leave\n\nEnhanced family leave policies, including 26 weeks paid maternity and adoption leave, and two weeks paid paternity/partner leave.\n\nOur shared parental leave matches maternity leave meaning we pay up to 24 weeks at full pay.\n\nUp to five additional days leave are provided for those with significant caring responsibilities, two of which are paid.\n\nLearning and development\n\nPrimary annual professional institution subscription.\n\nA broad range of opportunities to enhance both technical and soft skills through mentoring, formal training, and self-development options.\n\nNetworks, communities, and social outcomes\n\nJoin a wide range of groups including our Advanced Employee Networks which support our LGBTQ+, gender, race and ethnicity, disability, and parents/carers communities.\n\nMake a difference within our communities through our social outcomes.\n\nApply now, or for more information about our application process, click apply

Shift Multi-Skilled Electrical Bias Engineer\n\nLocation: Birmingham\n \nEmployment Type: Full-Time\n\nAbout Us\n\nCBRE is the global leader in real estate services, operating in 48 countries with over 70,000 employees. We deliver integrated facilities and corporate real estate management solutions to some of the world's most respected companies. Our vision is to be the preeminent, vertically integrated, globally capable real estate service firm.\n\nThe Opportunity\n\nWe are seeking a skilled Electrical Bias Engineer to join our dynamic team. This role is ideal for someone with a strong electrical background and experience in critical environments such as data centres or trading floors. You'll be responsible for maintaining and upgrading electrical systems, ensuring optimal performance and safety across our client sites.\n\nKey Responsibilities\n\nRespond to breakdown maintenance requests within SLA timelines.\nMaintain and repair modular UPS systems and diagnose power quality issues.\nConduct risk-focused maintenance and monitor critical systems.\nProvide emergency response and escalate urgent issues.\nComplete reactive Helpdesk requests and ensure documentation is up to date.\nUndertake site surveys, produce method statements and risk assessments.\nInstall and upgrade plant equipment and interpret technical drawings.\nMonitor environmental conditions and equipment loading.\nEnsure compliance with financial and health & safety processes.\nPrepare incident reports and root cause analyses for system outages.\n\nWhat We're Looking For\n\nEssential:\n\n18th Edition Electrical Wiring Regulations certification.\n\nDesirable:\n\nExperience with BMS, HVAC systems, chilled water circuits, and chilled beams.\nUnderstanding of CDM processes and H&S procedures (COSHH, Risk Assessments, etc.).\nHealth & Safety qualifications (IOSH/NEBOSH).\nTesting and inspection of electrical systems.\nFamiliarity with emergency response protocols.\nAuthorised Person certification (e.g., AP15/12).\nWater hygiene knowledge (L8).\nStrong communication and customer service skills.\n\nWhy Join Us?\n\nWork with a global leader in real estate services.\nBe part of a supportive and professional team.\nOpportunities for career development and training.\nCompetitive salary and benefits package

Civil Site Engineer- Renewable Energy (Solar & Bess) Various location across the UK About the Company A Leading global EPC and industrial group with a strong presence across the energy and metals sectors. The company has built an excellent reputation in the renewable energy space, delivering large-scale solar, wind, and energy infrastructure projects worldwide. With a significant international project portfolio and a strong track record in engineering, procurement, and construction, they are recognised for executing complex energy projects and supporting the global transition toward cleaner power and redefining the future of energy and resource innovation. They are seeking a number of Site Engineers to support its expanding UK Renewable Energy division with a growing portfolio of utility-scale Solar and Battery Energy Storage (BESS) projects. About the Role We are looking for a proactive Civil Engineer to join our renewable energy team, focusing on the planning, design, and construction of large-scale solar PV projects (5 MW and above). The role involves managing site activities, ensuring compliance with safety, environmental, and quality standards and coordinating with contractors, surveyors, and multidisciplinary teams to deliver projects efficiently and successfully from construction through to commissioning. You will work closely with the Construction Manager, project team, and subcontractors to ensure electrical works are completed safely, on time, and to specification. Key responsibilities will include: • Oversee and manage day-to-day construction site activities to ensure project timelines are met., • Interpret engineering drawings, plans, and specifications to guide site operations accurately., • Ensure all work is carried out in compliance with health, safety, and environmental regulations., • Coordinate with contractors, subcontractors, and project managers to maintain workflow efficiency., • Conduct site inspections and quality control checks to ensure standards and specifications are met., • Monitor project progress and prepare regular reports on timelines, costs, and performance., • Manage site resources, including materials, equipment, and labour allocation., • Resolve technical issues and provide engineering solutions during construction phases. Qualifications required: • A Bachelor’s degree in Civil Engineering / Master’s degree in Civil Engineering The Successful candidate will have: • Minimum 1–3 years of experience in site engineering within the construction or infrastructure sector, • Proven experience working on large-scale infrastructure projects, • Previous employment with a reputable EPC contractor or major infrastructure developer, • Strong understanding of construction processes, site coordination, and engineering standards, • Understanding of health & safety regulations and construction standards., • Strong analytical, problem-solving, and technical reporting skill's, • Strong knowledge of MV/LV systems, earthing, cable installation, and grid connection works, • Excellent use of English, • Construction experience, • Technical competence, • and UK driving licence This is an excellent opportunity to join a growing renewable energy platform within a publicly listed global EPC, offering exposure and clear progression.

Job Description for Design Engineer (Mechanical/Chemical/Process) Environmental Control Systems Location: Remote (UK-based) with travel to client sites Grade: S4 – Intermediate Project/Design Consulting Engineer Salary: £42,000 – £48,000 per annum (dependent on experience) Contract: Permanent, full-time (40 hours/week, flexible) Reports to: Managing Director / Senior Engineer OUR COMPANY MECHON is an independent environmental control systems consultancy. We design ventilation, LEV, specialist HVAC, and air pollution control systems for manufacturing, defence, pharmaceutical, and R&D environments across the UK and internationally. Our clients include major defence contractors, automotive manufacturers, chemical companies, and research facilities. We are not a contractor or installer. We are the consulting engineers who assess the problem, design the solution, write the specifications, and oversee delivery. Our work combines chemical and mechanical engineering — from workplace exposure assessment and DSEAR risk analysis through to full system design, dispersion modelling, and commissioning support. We are looking for a Design Engineer to join our team at Intermediate level (Grade S4), with a structured 2–4 year development pathway toward becoming a fully independent consulting engineer. WHAT YOU'LL DO You will work under the guidance of senior engineers to deliver environmental control system designs from concept through to completion. This is a consulting engineering role — the primary outputs are engineering calculations, risk assessments, technical reports, and design specifications. We have a dedicated CAD team; drawing production is not your core function. Your responsibilities will include: • Engineering calculations for LEV and process HVAC systems (airflow, pressure drop, thermal loads, exposure benchmarking), • ite surveys and audits to assess existing systems and gather design information, • Risk assessment work including COSHH exposure assessment and DSEAR under senior supervision, • Technical report writing and design specifications for clients, • Client liaison - attending design meetings, presenting findings, managing technical relationships, • Supporting project delivery from concept through to commissioning and handover WHAT WE NEED FROM YOU We don't expect you to arrive as a ventilation specialist. We do expect a solid grounding in engineering fundamentals that we can build on. Essential: • Degree in Mechanical Engineering, Chemical Engineering, Process Engineering, or closely related discipline, • Minimum 3 years' post-graduation engineering experience (does not need to be in ventilation, • process engineering, chemical plant, risk assessment, building services, or similar are equally relevant), • Working knowledge of fluid dynamics, thermodynamics, and heat transfer applied in a professional setting, • Strong written English and the ability to produce clear, structured technical reports, • Full UK driving licence, • UK right to work Desirable: • Experience with risk assessment methodologies (HAZOP, DSEAR, COSHH, or similar), • Exposure to consultancy or client-facing technical roles, • Professional registration or working toward CEng/IEng, • Competence with CAD software (AutoCAD, Revit, or similar) THE KIND OF ENGINEER WHO DOES WELL HERE Our environment is different from a large consultancy. There's no layer of project managers between you and the client. You won't have a team of 20 around you. What you will have is direct responsibility, genuine autonomy, and senior engineers who will invest time in your development. Our most successful engineers share certain qualities: they take ownership of problems without waiting to be told, they communicate clearly under pressure, they're motivated by the quality of their work rather than their job title, and they have the patience to develop genuine expertise in a specialist discipline. Our most successful hires have come from a range of backgrounds including chemical engineering, process engineering, and mechanical engineering. What matters more than your specific discipline is how you think, how you communicate, and whether you take pride in producing work that stands up to scrutiny. WHAT WE OFFER • £42,000 – £48,000 depending on experience, • Fully remote working with UK-wide site visits, • Structured development programme with senior engineer mentoring, • Funded CPD and professional development (training courses, BOHS qualifications, chartership support) 22 days annual leave plus bank holidays, increasing to 25 at the next grade, • Pension with employer contribution, • Travel expenses for site visits fully reimbursed, • A specialist consultancy where your engineering skills are the product, not a support function HOW TO APPLY Please submit your CV and a brief covering statement (no more than 300 words) explaining why this role interests you and what you would bring to MECHON. We are particularly interested in the breadth of your professional experience and how you approach unfamiliar technical problems. We don't use automated screening. Every application is reviewed by the team.

Position: Refrigeration Design Engineer (Industrial Refrigeration) Contract: Permanent, Full Time Location: Remote - Based anywhere in the UK (Head office is based in Leicestershire) Salary: up to £75K plus company car or cash allowance & benefits & performance bonus Industry: Industrial Cooling & Refrigeration – Food/FMCG, Cold Storage & Logistics, Data Centre PRS Engineering has engaged with a key client and a leading Industrial Cooling & Refrigeration specialist operating and delivering high value projects across the UK with headquarters based in Leicestershire. Due to team expansion and winning new projects, we are seeking an Industrial Design Engineer with a background in Ammonia, CO2 Systems, Industrial Cooling Technologies &/or Industrial Refrigeration to support business requirements and oversee key projects. This is a remote working role with occasional attendance at the Leicester office will be required as will site visits and site surveys. The Role: To design and propose industrial refrigeration systems for food manufacturing facilities and logistics cold storage centres. Detailing costs and designs to customers while meeting legislative and customer-specific requirements. To create comprehensive designs from initial briefs and/or drawings, whilst adhering to the latest company and industry standards. Produce detailed design work, consisting of but not limited to: cold room and facility heat load calculations, equipment selections, pumped circulation system design, P&ID development and approvals, concept design presentations, sales stage design applications, engineering specification sheets, pipework isometric drawings, and pipe sizing for ammonia refrigeration systems. This is a remote working role, but attendance at the Leicester office will be required as will site visits, surveys, and client presentations. Main Responsibilities • Carry out site surveys where required, • Generate and update enquiry bank, • Attend customer scoping and design meetings where required, • Produce initial outline design/scope, • Produce Design File (electronic or hard copy) in line with ISO 9001 standard, • Produce detailed design post sales stage and convert into live project for delivery team, • Conduct heat load calculations, produce engineering sheets and pipework isometric, • drawings, equipment selections and pipe work sizing, • Produce supplier/sub-contractor enquiries for quotations, • Produce data for Design of Contracts project handover including: Equipment/supplier/sub-contractor procurement schedule, identify PED category of system and inform compliance team if CAT 4, calculate system refrigerant charge, produce high level program of works and high level phasing with support of delivery team, • Raise Contract Approval Form to enable project to be booked on system, • Mark up drawings and issue to CAD department to produce, • Attend site at least once during project installation period, to carry out design review, • Assist PM during delivery phase for design queries, • Maintain excellent service levels at all times, ensuring a “first Class” service to all customers, • Take on projects as and when required and see them through to successful completion Financial • Produce estimates in line with customer budgets and to agreed company margins, • Produce formal scope of works and formal quotations, • Assist CM with project variation design and costs All contracts over £500k to have contract/design review with senior member of staff, • To identify means of generating extra revenue through new initiatives (forward thinking) People • One to one session with line manager once a quarter, • To treat other colleagues, managers, customers and other stakeholders equally and with courtesy and respect at all times, • Where possible - to assist others with tasks that may be outside of the scope of your role, • To assist with coaching other colleagues/managers, for cross training purposed in your area of expertise Compliance • Ensure that all relevant company and legislative policies and best practices are adhered to and always maintained, • Inform the relevant Manager of non-conformances and ensure that corrective action is taken, • Ensure compliance with all procedures throughout within your remit, • Produce Design File (electronic or hard copy) in line with ISO 9001 standard, • To ensure Refrigeration industry codes and standards are upheld, • To comply with environmental policies and putting forward new ideas for, • improving environmental efficiencies., • Adhere to Group H&S procedures with due regard for business constraints and efficiency

Civil Engineer or Civil Design Engineer Water Sector Flexible location - Birmingham, Glasgow, Chester, Redhill, Swansea, Bradford, Wiltshire, Leeds Contract or staff CIVIL ENGINEER JOB SPEC About the Role Typically, you will organise and/or undertake civil engineering activities within multi-disciplinary teams, whilst potentially supporting and mentoring more junior engineers. The role involves responsibility for: • undertaking strategic studies, feasibility work, outline and detailed designs for a wide variety of water utilities projects including water and wastewater treatment, conveyance and reservoir dam safety,, • producing calculations and reports to support those designs,, • working directly with clients to understand their needs and develop solutions to their problems,, • producing business cases and proposals to enable our clients to fund their projects,, • working with our construction partners to improve safety of designs and understand and improve the construction process,, • ensuring our designs take account of buildability, sustainability, H&S and environmental requirements About You • Approaching or at Chartered or Incorporated Engineer status with the Institution of Civil Engineers or another relevant institution., • Previous experience in the water sector is not essential, we would look for technical skills transferrable to a civil engineering role in the water sector., • Desire to support and mentor more junior engineers towards achieving Chartered or Incorporated Engineer status., • Excellent written and verbal communications skills., • Self-motivated and effective team player. CIVIL DESIGN ENGINEER ROLE Key Responsibilities: • Provide guidance and direction on department design guides, standards, systems and applicable engineering codes and standards., • Preparing calculations and develop civil engineering deliverables (models, drawings and reports) whilst adhering to project budgets, schedules and quality systems., • Providing guidance to others and support continuous improvement, • Coordinate with internal and external team members on complex projects, • Prepare a variety of complex civil engineering deliverables for large or multiple projects., • Develop recommendations for materials and construction techniques., • Develop specifications for the identification, collection and management of data for engineering work., • Serve as a technical specialist and use knowledge and skill set to provide advice and guidance to project teams., • Mentor and develop junior staff, • Be fully conversant and comply with all aspects of health & safety duties of Designers Person Specification: • Civil Engineering Design and/or Hydraulics/Structural background, • Experience in design and build, • Knowledge & Experience in the design and checking of non-infrastructure water/wastewater treatment works design, • Ability to lead and manage a team of civil engineers and associated specialists (structural, geotechnical and hydraulics) and to interface with other disciplines in the production of engineering deliverables

Chief Engineer – Caribbean Resort Opportunity GAP Talent is partnering with a growing resort group in the Caribbean to appoint a Chief Engineer for one of their flagship properties. The portfolio includes five properties, with the lead resort comprising 300 rooms set along one of the region’s most sought-after beachfront locations. The Role The Chief Engineer will lead all engineering and maintenance operations across the property, ensuring optimal performance of all mechanical, electrical, and physical assets. This role oversees a team of approximately 30 technicians, alongside a Deputy Chief Engineer. You will be responsible for the full scope of engineering operations, covering both interior and exterior facilities, including electrical, HVAC, refrigeration, plumbing, structural systems, landscaping, and parking infrastructure. Key Responsibilities • Lead, plan, and manage all engineering and maintenance activities across the property, • Develop and implement energy efficiency and utility optimisation strategies, • Prepare and manage annual operating, capital expenditure, and utilities budgets, • Oversee troubleshooting and maintenance of all mechanical, electrical, HVAC, and plumbing systems, • Manage inventory of materials, spare parts, and tools, • Coordinate team performance, set objectives, and ensure timely project delivery, • Negotiate and manage contracts with external vendors and service providers, • Conduct quality control checks across all systems and installations, • Estimate project costs including labour, materials, and timelines, • Ensure full compliance with all safety, regulatory, and environmental standards Candidate Profile • Bachelor’s degree in Electrical, Mechanical, or Civil Engineering, • Minimum 4 years’ experience in a senior management role, • At least 5 years’ experience within the hospitality sector, • Experience in large-scale resort or hotel environments, ideally with 6+ F&B outlets, • Strong technical knowledge across MEP systems and facilities infrastructure, • Proven ability to read, interpret, and review engineering drawings and schematics, • Working knowledge of ASHRAE, NFPA, NEC and other relevant life safety standards, • CEM or CFM certification preferred, • Hands-on experience with chilled water systems, • Experience managing wastewater treatment and reverse osmosis plants Package • Attractive Base salary, • Housing, relocation, and work permit support, • Full expatriate benefits package circa $120,000 USD neg. on experierence.