Trabajos inspection engineer en BedfordCrear alertas

Role Purpose \n To provide day-to-day leadership and hands-on support within the Production team, helping ensure safe, efficient and consistent delivery of products to agreed quality and business requirements. \n The role will typically spend around 60% of its time working directly alongside the Production team, combining practical production activity with supervision and coordination. The balance of the role provides technical and manufacturing support, working closely with and taking lead from the Manufacturing Support Engineer. The precise balance will vary in line with operational and business needs. \n Daily \n Hands-on production activity and day-to-day supervision of the Production team. \n Production priorities, workload coordination and effective use of available resources. \n First-line technical guidance and practical problem solving within Production. \n Support for manufacturing engineering, product introduction, product change and lifecycle activities. \n Quality, safety, compliance and continuous improvement within the production environment. \n Coaching, development and capability of the Production team. \n Cross-functional collaboration to maintain production flow and resolve operational issues. \n Ensuring continuity of services; production, assembly, stores, inspection during times of absence. \n Key Accountabilities \n 1. Hands-on Production & Delivery \n Work as an active member of the Production team while helping coordinate day-to-day priorities, workload and resources to meet customer and business requirements. \n Support effective production flow and timely delivery, maintaining appropriate standards of safety, quality, service and efficiency and escalating significant constraints where required. \n 1. Team Supervision & Leadership \n Provide visible day-to-day leadership and supervision to the Production team, setting clear priorities, supporting performance and maintaining appropriate accountability. \n Coach and support team members to build capability, flexibility and effective ways of working, involving the Supply Chain & Production Manager where broader people-management action is required. \n 1. Technical & Manufacturing Support \n Provide first-line technical support within Production and liaise with the Manufacturing Support Engineer and Quality to investigate and resolve manufacturing, test or product issues. \n Support appropriate production aspects of new product introduction, product changes, technical documentation, work instructions, non-conformances and implementation of agreed improvements. \n 1. Cross-Functional Coordination & Support \n Work closely with Supply Chain, Stores, Engineering, Quality, Product Management, Customer Services and other relevant functions to support production priorities and successful implementation of change. \n Maintain clear communication on production status, technical issues, constraints and improvement opportunities, ensuring material matters are raised with the appropriate owner in a timely manner. \n Key Relationships / Contacts \n Supply Chain & Production Manager. \n Production team, Stores and Supply Chain colleagues. \n Manufacturing Support Engineer, Engineering and Quality. \n Product Management, Customer Services and other relevant business functions. \n Relevant suppliers, group colleagues and external partners where required. \n \n Essential \n Experience of production \n Experience of supervising a small team \n Experience of Reviews, appraisals, development of staff \n Experience of working with technical products \n Happy to be hands on as well and supervising. \n

We have an exciting opportunity for a Workshop Repair Engineer to join the engineering team at our Depot in Bedford. As a Workshop Repair Engineer you will be responsible for Repair depot fleet assets to company and legislative standards In return you will receive a Competitive Salary, 25 days annual holiday plus bank holidays, Westfield Health Cash Plan, Life Assurance, Auto enrolment pension scheme and Lifestyle benefits – Discount on selected high street store. Responsibilities include: Support the Workshop Service Manager in the effective running of the Depot workshop, ensuring that machines under repair KPIs are maintained at manageable levels. Undertake routine and complex repairs to machines at depot to ensure conformance with manufactures specification and company policy. Working with the depot team ensure the quantity and amount of time machines are under repair is kept a low as possible, in line with depot KPIs. Act as an ambassador for the company, providing a high standard of customer care and being polite at all times. Relay appropriate customer queries to depot staff as required. Accurately complete all relevant paperwork, using Company's engineering system/application. Update system on machine status change i.e. PDI/PHI carried out, Machine under repair, 6 monthly statutory Inspection completed, etc. Be an ambassador for and ensure compliance of Quality, Health & Safety standards, and policies. The ideal candidate will have/be: IPAF Operator Licence. Relevant general engineering maintenance qualification, preferably to NVQ level 3 or equivalent. Experience of completing complex engineering repairs. Have a mature outlook and the ability to prioritise tasks and work well under pressure. Understand the importance of excellent customer service. Experience in diesel engineering, auto electrics, hydraulics and diagnostics fault finding. Ability to use basic functions of the operating system (L-Vis) to complete tasks relevant to role. Ability to complete basic company administration processes in line with role. Use all equipment, tools and PPE as prescribed in a safe and proper manner. Part of the Loxam Group, Nationwide Platforms are the UK's leading specialist provider of Powered Access rental equipment, with the largest and broadest fleet, local depots spread across the country and our wealth of experience partnering with companies in a variety of sectors including Construction, Warehouse & Distribution, Aviation, Facilities Management, Industrial Services, Telecoms and Media, our customers can depend on us to provide the right solution to support their every working at height need. At Nationwide Platforms, your safety is absolutely our priority. Our award winning BlueSky Solutions and Training division offer our customers access to the latest and safest ways to work and through long standing partnerships with our manufacturers, we will always provide equipment that will lead the way to a safer industry. Some of our innovations include the award-winning secondary guarding systems and Harness ON™, a range of pioneering Material Handling Attachments (MHAs), and the SkySentry™ control and monitoring system. At Nationwide Platforms, we are dedicated to fostering a diverse, equitable, and inclusive workplace. We recognise that a variety of perspectives, experiences, and backgrounds is crucial to our success in the Powered Access industry. Our commitment is to ensure that every employee feels respected, valued, and supported in their work environment TPBN1_UKTJ

Permanent, 37.5h, 4 day working week Monday to Thursday Ampthill The Quality Assurance Engineer is responsible for ensuring products and processes meet customer, regulatory, and business requirements throughout the product lifecycle. Working closely with Engineering, Manufacturing, and Supply Chain teams, the role supports quality planning, non-conformance management, root cause investigations, and continuous improvement activities within an AS9100-regulated environment. • Generate and maintain Control Plans from engineering drawings, specifications, and customer requirements for parts and assemblies., • Review engineering drawings and technical documentation to identify critical quality characteristics and inspection requirements., • Manage the non-conformance process, including containment, quarantine, investigation, disposition, and closure., • Lead Root Cause Corrective Action (RCCA) activities using structured problem-solving tools including 8D, 5 Whys, and Fishbone analysis., • Participate in design reviews and drawing reviews to ensure quality requirements are effectively incorporated into product designs., • Support New Product Introduction (NPI) activities by defining and implementing quality requirements and controls., • Collaborate with Engineering and Manufacturing teams to resolve product and process quality issues., • Analyse quality data and metrics to identify trends, drive corrective actions, and support continuous improvement initiatives., • Support internal, customer, and third-party audits and ensure compliance with AS9100 quality management system requirements., • Maintain quality documentation, procedures, inspection plans, and records in line with company and customer requirements, • Strong understanding of quality assurance principles, non-conformance management, and root cause analysis techniques., • Experience working within an AS9100-regulated manufacturing environment., • Ability to interpret engineering drawings, technical specifications, and manufacturing documentation., • Experience with Control Plans, RCCA, and quality problem-solving methodologies., • Strong analytical, organisational, and communication skills., • Ability to work effectively within cross-functional teams., • Experience within Aerospace or Defence manufacturing., • Knowledge of AS9102 First Article Inspection requirements., • SAP experience or familiarity with similar ERP systems., • Understanding of Lean Manufacturing and Continuous Improvement tools., • Engineering, Manufacturing, or Quality-related qualification (HNC/HND, Degree, or equivalent)., • Knowledge of IPC610/620 or similar electrical experience #J-18808-Ljbffr

Cambridge Maintenance Services is a nationwide supplier of mechanical and electrical building services maintenance with over 34 years of experience in delivering its building services maintenance to the corporate, healthcare, education, retail, transport and manufacturing sectors. It also ensures optimum energy efficiency for every property portfolio it manages. We are experts in delivering compliant, safe, and efficient workplaces. Our nationwide building services maintenance solutions span the corporate, healthcare, education, retail, transport, and manufacturing sectors. Using advanced technology and data, we provide cutting‑edge maintenance services that are trusted by major managing agents and independent clients alike. As a multi-award‑winning business, our local teams are dedicated to providing personalised FM services that meet your specific needs. As a key member of our Electrical maintenance team, you'll play a vital role in delivering both planned and reactive maintenance across a range of electrical systems within our client portfolio. You'll be responsible for ensuring equipment operates safely and efficiently while providing an exceptional service that consistently exceeds customer expectations. Everything you need to do the job will be provided, including a company van, mobile phone, tablet and uniform. • Deliver exceptional service to our clients, ensuring all work is completed to the highest standards and in line with contractual requirements., • Carry out planned preventative maintenance (PPM) and respond promptly to reactive maintenance and equipment breakdowns., • Diagnose and rectify faults efficiently, arranging equipment replacements where required to minimise downtime., • Complete quality inspections and ensure all work meets recognised industry standards and best practices., • Effectively manage and maintain records through our Elogbooks facilities management system., • Work closely with the Lead Engineer and Support Desk Supervisor to coordinate maintenance schedules, priorities, and reporting requirements., • Participate in the out-of-hours emergency call‑out rota as required., • Undertake a variety of hands‑on and physically demanding tasks across client sites., • Ensure full compliance with company policies, health & safety legislation, and relevant industry regulations., • Take ownership of your professional development by participating in training and maintaining up‑to‑date technical knowledge and qualifications., • Build positive working relationships with clients and colleagues, representing the business professionally at all times., • Support the wider team by undertaking additional duties appropriate to the role when required. Bedford. 42.5 hours per week between Monday - Friday. Overtime starting after 47.5 hours. • Good understanding of M&E building services., • Relevant Electrical Installation qualification (e.g. City & Guilds Level 3 or equivalent)., • Inspection & Testing qualification (e.g. City & Guilds 2391-52)., • Full UK driving licence., • Strong electrical fault‑finding and diagnostic skills., • Ability to interpret and analyse electrical systems., • Self‑motivated with the ability to work independently and as part of a team., • Strong communication and interpersonal skills., • Methodical approach to record keeping and reporting., • Practical, hands‑on attitude with excellent problem‑solving skills., • City & Guilds / Plumbing / AC servicing / Gas., • 18th Edition., • LV Approved., • Eligible roles benefit from a bonus scheme and car allowance, • Enhanced Family‑Friendly Benefits, • Fertility Treatment Leave, • Pension scheme with Scottish Widows, • Salary Sacrifice Car Scheme, • Death in Service Cover, • Employee Referral Scheme, • Employee & Family 360 Wellbeing Support, • Employee of the Month Recognition Scheme, • Career development and internal mobility across the Mecsia Group #J-18808-Ljbffr

We are a well-established provider of engineering maintenance services to a world leading manufacturer of power solutions for the Commercial, Aviation, Marine and Military markets. In the past few years, we have grown our UK team from 7 staff to 29 with work shops in Bedford, Manchester and Gatwick. We now have an outstanding opportunity for a highly motivated Service Engineer to join our team. Located within an hour of Bedford, you will likely spend two days per week at our workshop here and the rest of the week travelling to customer sites across the country. You will work as part of a respected technical service team responsible for world class power related electronic equipment. This role will focus on the static inverters and aviation ground power units. Visiting customer sites, making sure all RAMS are completed and all customer requirements are in place before the visit. Recognising & diagnosing faults using technical experience and/or diagnostic equipment. Signing off on all units repaired at the workshop or customer's site. You will possess at least an NVQ Level 3 in Electrical Installation/Maintenance or a BTEC Level 3 Diploma in Electrical/Electronic Engineering ideally obtained during a formal apprenticeship. At least one formal Level 3 Electrical Testing and Inspection qualification such as the C&G 2391, 2391-10, or C&G 2394 & 5. 18th Edition IEE Wiring Regulations. Experience with Commercial or Emergency Lighting, Battery Solutions, UPS, Ground Power Units (Aviation) & Airport GSE or similar would be beneficial. Full UK Driving License. Ability to use, read and interpret electrical drawings. You are proficient with electrical testing equipment. You will have at least 2-3 years' experience in a similar role. Salary to £46,000. Vehicle. Private health. Work wear. Tools. - Remember: You should never send money to a prospective employer or disclose any financial information. Should you encounter any job listings requesting payments or financial details, please reach out to us immediately. For further guidance, visit jobsaware.co.uk. - Related Sectors: Engineering | Construction | IT | Manufacturing | Automotive | Science | Aviation | Energy | Oil & Gas | Agriculture | Part Time | Cleaning | Marketing | Retail | Civil Service. - Related by job title: Field Service Engineer Jobs | Maintenance Engineer Jobs | Project Engineer Jobs | Electrician Jobs | Engineering Buyer Jobs | Gas Engineer Jobs | Mechanical Design Engineer Jobs | Mobile Tail Lift Engineer Jobs | Service Engineer Jobs | Area Sales Manager Jobs. TPBN1_UKTJ

The Structural Integrity Engineer (SIE) is a senior technical specialist who analyses, develops, and validates the mechanical integrity of complex structural systems across light‑weight and heavy‑weight platforms. The role encompasses metallic, non‑metallic, and composite materials, covering design, production, testing, and maintenance phases. Core responsibilities include damage‑tolerance, durability, and structural modelling across dynamics, loads, stability, stress fatigue and thermal analyses. The duty cycle uses a broad array of engineering tools, notably MSC Nastran, MSC Marc, Siemens Simcenter, Beta CAE, ANSA, and PTC Creo. The Structural Integrity Engineer will be a Subject Matter Expert in structural analysis and integrity decision‑making, operating within the Structural Integrity Group, a sub‑function of the Engineering Department. A key requirement of this role is the ability to obtain and maintain a high‑level security clearance. If you do not currently hold the required clearance, we can support you through the application process. DV Clearance will eventually be required for the role - applicants should either already hold a DV or being prepared to go through an application immediately. This position will require an on-site presence in Ampthill, Bedfordshire. Core responsibilities will include: • Developing and validating high‑fidelity finite‑element models for metallic, composite and hybrid structures., • Executing static, dynamic, vibrational, thermal and fluid‑structure interaction analyses., • Performing damage‑tolerance and fatigue assessments., • Authoring concise strength‑summary reports and risk assessments that satisfy MoD and customer standards., • Translating analysis outcomes into manufacturing instructions and inspection plans., • Leading knowledge‑transfer workshops and maintaining model libraries., • Championing process improvement through new software, material databases and automation scripts., • Representing the Company at design reviews, client briefings and external audits., • Proven experience of industrial structural‑analysis experience on metallic and composite parts., • BEng (Hons) in Mechanical/Aerospace or equivalent., • Proficient in MSC Nastran and pre‑processors such as Patran, Apex, Simcenter, or ANSA., • Experienced in static, dynamic, linear and non‑linear analyses., • Skilled in hand‑based stress calculations and fatigue life prediction., • Extensive experience modelling aluminium, titanium, steel and high‑strength alloys for both light‑ and heavy‑weight systems., • Basic knowledge of composite lay‑up, ply‑by‑ply modelling and defect effects., • Capable of drafting clear, concise strength‑summary reports and risk assessments., • Comfortable working collaboratively with design, manufacturing, testing and quality teams., • Skilled in scripting (Python, batch) and use of high‑performance computing to streamline analyses., • Candidates must be able to undergo the process to achieve a Secret Clearance and be willing to go through the process to achieve a Developed Vetting Clearance. At Lockheed Martin our employees come first and therefore your physical, mental and financial wellbeing matters to us. On top of working in a highly supportive, friendly, respectful environment you can expect so much more. We are an employer in support of and offering Flexible working with the option to also work a 4 day week depending on business requirements, where you have the option of Fridays off. Lockheed Martin (UK) Ampthill is a rapidly changing, dynamic part of the Lockheed Martin Corporation with both domestic and international customers. It consists of three business areas focusing on Vehicles, Special Projects and Mission Support, which provide a variety of products and services to the MoD and other customers including the Scout and support to the Land Environment Air Picture Provision capability. We are looking for talented individuals to join the company, in return, we can offer an exciting and challenging career path. Please note that Lockheed Martin Ampthill work an 8 day fortnight with the site closed every Friday. Lockheed Martin recognises and actively promotes the benefits of a diverse workforce and is committed to treating all employees with dignity and respect regardless of race, gender, disability, age, sexual orientation, religion or belief. Discrimination on any of these grounds is expressly forbidden. We therefore welcome applications from all sections of the community. Lockheed Martin is committed to upholding principles of equal opportunity, fostering a work environment that is aligned with our core values of integrity, respect, and exceptional performance. We recognize the importance of leveraging the unique talents and experiences of all our employees to drive innovation, deliver superior solutions, and maximize value for our customers. Our focus is on identifying the most qualified candidate for each role, regardless of their background. If you are interested in a position, we invite you to share how your skills and perspectives could bolster our team and encourage you to apply, even if you feel your qualifications do not fully meet all the job criteria outlined in our advertisement. Furthermore, Lockheed Martin is dedicated to ensuring our recruitment process is inclusive for all individuals. We are prepared to accommodate reasonable adjustments for applicants as needed. #J-18808-Ljbffr

Bedford Head Office Salary to £46,000 plus vehicle, private health, work wear, tools and more We are a well-established provider of engineering maintenance services to a world leading manufacturer of power solutions for the Commercial, Aviation, Marine and Military markets. In the past few years, we have grown our UK team from 7 staff to 29 with work shops in Bedford, Manchester and Gatwick. We now have an outstanding opportunity for a highly motivated Service Engineer to join our team. Located within an hour of Bedford, you will likely spend two days per week at our workshop here and the rest of the week travelling to customer sites across the country. You will work as part of a respected technical service team responsible for world class power related electronic equipment. This role will focus on the static inverters and aviation ground power units and involve visiting customer sites, making sure all RAMS are completed and all customer requirements are in place before the visit, recognising & diagnosing faults using technical experience and/or diagnostic equipment and signing off on all units repaired at the workshop or customer's site. We invite applications from experienced Service Engineers with an electrical bias and the following skills: • Extensive knowledge of fixed power at head of stand 415 v in 200v X400HZ along with TRU knowledge 28 volt., • You will possess at least an NVQ Level 3 in Electrical Installation/Maintenance or a BTEC Level 3 Diploma in Electrical/Electronic Engineering ideally obtained during a formal apprenticeship, • At least one formal Level 3 Electrical Testing and Inspection qualification such as the C&G 2391, #removed#, or C&G 2394 & 5, • 18th Edition IEE Wiring Regulations, • Experience with Commercial or Emergency Lighting, Battery Solutions, UPS, Ground Power Units (Aviation) & Airport GSE or similar would be beneficial, • Full UK Driving License, • Ability to use, read and interpret electrical drawings, • You are proficient with electrical testing equipment, • You will have at least 2-3 years' experience in a similar role #J-18808-Ljbffr

Electrical Engineer Corsham £50,000 - £55,000 We're working with a client who is looking to add an Electrical Engineer to their team in Corsham. This is an exciting opportunity to work within a close-knit team and be able to work in a critical environment. Please note, this position is working on a Day shift pattern (7am - 7pm, continental pattern and will also require travelling to another site one/two times per month. Electrical Engineer Main Duties: • Conduct site inductions and issue relevant PTW, ATW, LOA, and dynamic risk assessments., • Carry out escort duties for all subcontractors on site., • Respond promptly to reactive maintenance and installation works., • Attend emergency reactive works, breakdowns, and remedial tasks as required., • Perform fault-finding activities and carry out necessary plant adjustments., • Record meter readings, monitor energy consumption, and identify opportunities for proactive energy savings., • Complete planned preventative maintenance (PPM) tasks in accordance with contract specifications., • Utilise Manager+ and MCIM systems to close out PPM tasks and maintain accurate asset data records., • Conduct monthly generator testing on a rotational basis with the Second Day Technician., • Carry out weekly fire alarm testing in accordance with site requirements., • Ensure full compliance with company policies and procedures., • Learn, understand, and effectively use our clients' SDSK system to ensure all reactive tickets are updated and closed within agreed SLA timeframes., • Maintain and update site logbooks where applicable., • Monitor building fabric conditions, report issues promptly, and ensure actions are completed in line with SLA requirements. Electrical Engineer Requirements:, • Minimum of 3 years experience in carrying out Electrical testing in a commercial environment, • City and Guilds / EAL / NVQ or equivalent in Electrical Installations / Engineering (Level 3 and regulations), • Desirable - hold the Test & Inspection (2391 or 2394 & 2395) Qualification Electrical Engineer Salary and Package:, • £50,000 - £55,000 per annum (Dependant on experience), • Continental Shift Pattern (Days only - 12 hour shifts, 7am - 7pm), • 20 days annual leave + Bank holidays, • Company pension scheme, • Internal progression, • Overtime available, • Additional training JBRP1_UKTJ

We are currently recruiting for an experienced Workshop-Based Pump Engineer / Mechanical & Electrical Engineer to join a growing engineering team in Bedford. This is a hands-on workshop position, ideal for an experienced engineer who enjoys getting stuck into the technical side of the job. You’ll be responsible for the inspection, fault-finding, strip-down, repair, rebuild and testing of pumps, motors, fans and other rotating equipment. You’ll become a key technical presence within the workshop, helping maintain high standards of repair quality and supporting the wider engineering team with your knowledge and experience. • Strip, inspect, repair and rebuild pumps, electric motors, fans and rotating equipment., • Diagnose mechanical and electrical faults and identify failed or worn components., • Assess incoming equipment and determine whether repair, rebuild or replacement is required., • Identify and specify parts including bearings, seals, couplings, impellers, shafts, gaskets and electrical components., • Rebuild equipment to a high standard, ensuring correct tolerances, alignment and assembly., • Carry out workshop testing following repairs to ensure equipment is safe and functioning correctly., • Produce accurate inspection, fault-finding and repair reports., • Support the wider workshop team with pump and equipment assembly., • Provide technical support to external engineers and internal teams when required., • Maintain a clean, organised and safe workshop environment., • Contribute to improving workshop efficiency, quality and repair processes. We're looking for an experienced engineer with at least 5 years' experience in a similar workshop-based role. You’ll ideally have strong experience working with: • Pumps and pumping equipment, • Electric motors, • Fans and rotating equipment, • Bearings, seals, couplings, shafts and impellers, • Mechanical assemblies, • Mechanical fault finding, • Basic electrical diagnostics, • Strip-down and rebuild work, • Workshop testing and repair, • Pump service and repair, • Water / wastewater, • Drainage, • Building services, • Rotating equipment, • Electro-mechanical engineering, • Lunches are unpaid breaks, • Drug testing is implemented during employment, • All offers are subject to DBS Formal qualifications in Mechanical, Electrical or Electro-Mechanical Engineering would also be beneficial. Experience with insulation and continuity testing, motor diagnostics, overhead cranes or forklift equipment would be an advantage. #J-18808-Ljbffr

To provide day‑to‑day leadership and hands‑on support within Casella's Production team, helping ensure safe, efficient and consistent delivery of products to agreed quality and business requirements. The role will typically spend around 60% of its time working directly alongside the Production team, combining practical production activity with supervision and coordination. The balance of the role provides technical and manufacturing support, working closely with and taking lead from the Manufacturing Support Engineer. The precise balance will vary in line with operational and business needs. To provide day‑to‑day leadership and hands‑on support within Casella's Production team, helping ensure safe, efficient and consistent delivery of products to agreed quality and business requirements. The role will typically spend around 60% of its time working directly alongside the Production team, combining practical production activity with supervision and coordination. The balance of the role provides technical and manufacturing support, working closely with and taking lead from the Manufacturing Support Engineer. The precise balance will vary in line with operational and business needs. • Hands‑on production activity and day‑to‑day supervision of the Production team., • Production priorities, workload coordination and effective use of available resources., • First‑line technical guidance and practical problem solving within Production., • Support for manufacturing engineering, product introduction, product change and lifecycle activities., • Quality, safety, compliance and continuous improvement within the production environment., • Coaching, development and capability of the Production team., • Cross‑functional collaboration to maintain production flow and resolve operational issues., • Ensuring continuity of services; production, assembly, stores, inspection during times of absence., • Work as an active member of the Production team while helping coordinate day‑to‑day priorities, workload and resources to meet customer and business requirements., • Support effective production flow and timely delivery, maintaining appropriate standards of safety, quality, service and efficiency and escalating significant constraints where required., • Provide visible day‑to‑day leadership and supervision to the Production team, setting clear priorities, supporting performance and maintaining appropriate accountability., • Coach and support team members to build capability, flexibility and effective ways of working, involving the Supply Chain & Production Manager where broader people‑management action is required., • Provide first‑line technical support within Production and liaise with the Manufacturing Support Engineer and Quality to investigate and resolve manufacturing, test or product issues., • Support appropriate production aspects of new product introduction, product changes, technical documentation, work instructions, non‑conformances and implementation of agreed improvements., • Ensure activities within the role are carried out in accordance with Casella's Quality Management System, health and safety requirements and agreed production standards., • Identify and support practical improvements in production methods, quality, productivity, waste reduction and team effectiveness, working with relevant specialists where required., • Work closely with Supply Chain, Stores, Engineering, Quality, Product Management, Customer Operations and other relevant functions to support production priorities and successful implementation of change., • Maintain clear communication on production status, technical issues, constraints and improvement opportunities, ensuring material matters are raised with the appropriate owner in a timely manner. Specific objectives and measures will be agreed through the business planning and performance‑management process and may change in line with business priorities. They will typically cover: • Production delivery, throughput and effective day‑to‑day coordination., • Product quality, rework, compliance and adherence to agreed production standards., • Timely identification, resolution or escalation of technical and operational issues., • Team capability, flexibility, engagement and supervisory effectiveness., • Safety, continuous improvement and contribution to wider operational performance., • Supply Chain & Production Manager., • Production team, Stores and Supply Chain colleagues., • Manufacturing Support Engineer, Engineering and Quality., • Product Management, Customer Operations and other relevant business functions., • Relevant suppliers, group colleagues and external partners where required., • The role requires a hands‑on presence within the production environment and flexibility to respond to changing production priorities., • Occasional flexibility in working arrangements or additional hours may be required to meet business needs., • The responsibilities described in this role profile are not exhaustive. The role holder is expected to undertake other duties, projects and accountabilities consistent with the level and purpose of the role and to adapt as business needs, structure and priorities evolve. #J-18808-Ljbffr

Bedford £40,000 £45,000 DOE Monday Friday 7:30am 4:30pm Full-time Permanent We are currently recruiting for an experienced Workshop-Based Pump Engineer / Mechanical & Electrical Engineer to join a growing engineering team in Bedford. This is a hands-on workshop position, ideal for an experienced engineer who enjoys getting stuck into the technical side of the job. You ll be responsible for the inspection, fault-finding, strip-down, repair, rebuild and testing of pumps, motors, fans and other rotating equipment. You’ll become a key technical presence within the workshop, helping maintain high standards of repair quality and supporting the wider engineering team with your knowledge and experience. • Strip, inspect, repair and rebuild pumps, electric motors, fans and rotating equipment., • Diagnose mechanical and electrical faults and identify failed or worn components., • Assess incoming equipment and determine whether repair, rebuild or replacement is required., • Identify and specify parts including bearings, seals, couplings, impellers, shafts, gaskets and electrical components., • Rebuild equipment to a high standard, ensuring correct tolerances, alignment and assembly., • Carry out workshop testing following repairs to ensure equipment is safe and functioning correctly., • Produce accurate inspection, fault-finding and repair reports., • Support the wider workshop team with pump and equipment assembly., • Provide technical support to external engineers and internal teams when required., • Maintain a clean, organised and safe workshop environment., • Contribute to improving workshop efficiency, quality and repair processes. We're looking for an experienced engineer with at least 5 years' experience in a similar workshop-based role. You’ll ideally have strong experience working with: • Pumps and pumping equipment, • Electric motors, • Fans and rotating equipment, • Bearings, seals, couplings, shafts and impellers, • Mechanical assemblies, • Mechanical fault finding, • Basic electrical diagnostics, • Strip-down and rebuild work, • Workshop testing and repair, • Pump service and repair, • Water / wastewater, • Drainage, • Building services, • Industrial engineering, • Rotating equipment, • Electro-mechanical engineering Formal qualifications in Mechanical, Electrical or Electro-Mechanical Engineering would also be beneficial. Experience with insulation and continuity testing, motor diagnostics, overhead cranes or forklift equipment would be an advantage. #J-18808-Ljbffr

QUALITY ENGINEER - Permanent Opportunity DIVISION: Civil Engineering LOCATION: Northern Ireland - with potential travel throughout the UK Benefits: Car Allowance, Subsidised Private Medical Cover, Life Assurance; Living away from home allowance (where appropriate), Contributory Pension, 35 Days annual leave (Including Public Holidays) Due to an exciting period of growth, we are looking to add an enthusiastic and knowledgeable Quality Engineer, to provide quality assurance support to the Site Management teams, on our Northern Ireland based projects. We are open to speaking with either; experienced Quality Assurance Engineers or Civil Engineers, who are looking for a new challenge. Excellent communication skills are key, as are stellar organisation skills, in order to plan and prioritise workload. This role may, on occasion, require your presence on other UK wide sites, so the willingness to travel is essential.Those with a Civil Engineer/Construction related degree would be held in high regard, as would candidates with recognised and approved Quality Management qualifications. Job Specifics: • Implement the QA/QC management system at site, • Coordinate with quality inspections with all the site sub-contractors and vendors coordinate all non-destructive testing on site, • Coordinate with the client's representative on all quality matters, • Distribute relevant QA/QC documentation to site subcontractors, • Verify that the quality related site activities are in accordance with the applicable codes and standards, • Participate in the site internal and external site audits, • Ensure all quality control documentation is compiled and competed for as-built hand over to client, • Control all non-conformance reports and undertake remedial action, • Compete site quality control instructions and action remedial responses, • Monitor the implementation of the approved site QC Plan, • Complete and coordinate the approval of the site's QC technical submittals to the customer, • Coordinate with the site construction manager on all quality issues Coordinate and chair the QA/QC site weekly meetings with the projects subcontractor's QC personnel, • Elaborating inspection and test programme, • Assure all technical documents relative to site quality control are currentThis job description is intended to give the post holder an appreciation of the role envisaged for the Quality Engineer and the range of duties to be undertaken. It does not attempt to detail every activity. Specific tasks and objectives will be agreed with the post holder at regular intervals. Our Commitment At GRAHAM, we are proud to say that we are a committed Equal Opportunities Employer and we aim to be the first choice for people from all backgrounds. We seek to promote respect for the individual and equality of opportunities. We believe that everyone should be treated solely on the basis of personal merit and contribution throughout their GRAHAM career journey and not on the value of artificial barriers, prejudices, or preferences. If you require any adjustments or accommodations during the application or interview process, please let us know. We welcome applicants from all backgrounds. We are dedicated to making our policies and guidance accessible to all applicants and employees. If you need this document in an alternative format, such as large print, audio, or braille, please reach out: Phone: 07384 916355 As a Disability Confident Employer, we guarantee an interview to disabled applicants who meet the minimum essential criteria for the role. If you would like to apply through the Disability Confident Interview Scheme, please reach out to Louise Hunter, Resourcing Manager, on: Phone: 07384 916355 We are only able to consider applications from individuals who are eligible to live and work in the UK, as per Home Office regulations. Please check your eligibility with the regulations before applying. Individuals with a current time restricted right to work in the UK, should contact the Human Resources team in the first instance. A basic disclosure may be requested if security clearance is required by 3rd party clients and a criminal record will not necessarily be a bar to obtaining a position. Our Access NI/Vetting and Barring Scheme Policy and Policy on the Recruitment of Ex-Offenders is available upon request. GRAHAM reserves the right to carry out checks to ensure the validity of an applicant's experience and/or qualifications and we expect all applicants to comply with any such requests for information. Failure to do so or evidence of any falsification of information will lead to either removal from the recruitment process or if already in employment potential termination of contract through the company disciplinary procedure. JBRP1_UKTJ

ARS Consultancy is seeking an experienced Civil Engineer to join our team in the United Kingdom. The candidate will work with project managers, engineers, contractors and other stakeholders to support the delivery of civil and structural projects from planning through to completion. The role involve

Seeking a Quality Engineer with hydraulics/supplier inspection experience, offering full training to become a Quality Manager with international travel opportunities.

Experienced Electrical Test and Inspection Engineer needed for a leading company.

An excellent opportunity for an experienced Inspection & Workshop Engineer to join a well-established company. The company are currently seeking an experienced Inspection & Workshop xdjnayx Engineer to join their dynamic team.

Carry out electrical inspections and testing on customer installations, including emergency lighting and fire alarms.

Seeking an HGV Vehicle Inspection Engineer for a field-based role across the UK, with a salary up to £38,212.

Previous service engineering background. Field Service Engineer (Healthcare). Are you an ambitious Service Engineer looking for the opportunity to upskill yourself, where you will increase your earnings through door to door overtime, combined with occasional stay aways and further technical training

There are a market leader in their industry and are now looking for an Electronically biased maintenance Technician / Engineer to join their team near Kempston, Bedford. As Maintenance Engineer, you will carry out scheduled preventative maintenance tasks and services, on predominantly electronic, el

Reference Number: BBBH27638 Keywords: Field Service Engineer, Service Engineer, Mechanical Engineer, Electrical Engineer, Packaging Machinery, Industrial Machinery, Commissioning, Maintenance, PPM, Breakdown Engineer, Wellingborough, Northamptonshire, UK Travel We are an equal opportunities employ

New Opportunity - Field Service Engineer Are you a qualified Refrigeration Engineer looking for a field-based role with no weekend or on-call work? A fantastic opportunity has arisen for a Field Service Engineer (Refrigeration) to join a Nottingham-based specialist manufacturer, covering custome

Mechanical – Servicing and maintenance · PLCs –fault finding · Recognised engineering qualification (electrical / electronic / mechatronics) · Shifts – Earlies, lates, nights rotating (8 hours) Company benefits – · £52,000 + Overtime + Great benefits package · Pension Scheme

Van Driver / Driver Technician (Ongoing Temporary) Location : Bedfordshire Pay Rate: £12.Essential: Full UK driving licence and a Valid DBS Check We are currently recruiting for a reliable and customer-focused Van Driver / Driver Technician to join our client's team on an ongoing temporary basis.Th

Candidates from an electrical, electronic, mechanical, medical engineering, scientific equipment, industrial engineering or current/ex-military engineering background will also be considered. You'll work closely with NHS hospitals, private healthcare providers, Service Managers and fellow engineers

Field Service Engineer Position Overview Diagnosing and resolving mechanical and electrical faults on industrial packaging machinery Carrying out planned preventative maintenance and servicing Attending customer sites to investigate and repair machinery breakdowns Installing, commissioning and setti

Reference Number: BBBH27638a Keywords: Junior Field Service Engineer, Graduate Engineer, Trainee Engineer, Service Engineer, Engineering Graduate, Engineering Apprentice, Commissioning, Maintenance, PPM, Wellingborough, Northamptonshire, UK Travel We are an equal opportunities employer and welcome

Role Overview Electrical & mechanical PPM, reactive and breakdown maintenance Working as part of a skilled, friendly engineering team Reporting into an experienced Maintenance Manager Maintaining fast-moving, high-volume industrial production equipment Involvement in CI/Kaizen projects and cross-fun

Job Title: Contract Maintenance Engineer Location: Bedford, Bedfordshire Salary: £35 per hour Shift: 2's and 3's Days and Nights Job Role of the Contract Maintenance Engineer We are currently recruiting for a Contract Maintenance Engineer to join a well-established and successful packaging manu

Join a well-established social housing contractor on a permanent contract as a Joiner , covering the E16 area of London.I'd love to hear from anyone with experience working as a Joiner , ideally within social housing or domestic properties.The Joiner role is offering: • £32,000 per year plus a

MULTI-SKILLED ELECTRICAL MAINTENANCE ENGINEER Job Title: Multi-Skilled Electrical Maintenance Engineer Location: Bedford Salary: £35,000 – £44,000 Shift: Days Job Role of the Multi-Skilled Electrical Maintenance Engineer A fantastic opportunity has arisen for a Multi-Skilled Electrical

Warehouse Operative – Reach Truck Driver Location: Flitwick Reports to: Warehouse Supervisor Salary: Up to £31,500 per annum Overall Purpose of the Job We are looking for a skilled and reliable Warehouse Operative with a valid, in-date Reach Truck Licence to support all aspects of our warehouse o

They are currently looking for a Multi-Skilled Maintenance Engineer to join their expanding team. Multi-Skilled Maintenance Engineer.

Warehouse Operative – Reach Truck Driver Location: Bedford Reports to: Warehouse Supervisor Salary: Up to £31,500 per annum Overall Purpose of the Job We are looking for a skilled and reliable Warehouse Operative with a valid, in-date Reach Truck Licence to support all aspects of our warehouse op

This is a senior leadership opportunity for an experienced electrical engineer who wants to influence technical strategy, shape project delivery and help develop the next generation of engineering talent. ABOUT THE ROLEAs a Senior Principal Electrical Engineer, you’ll provide strategic technical l

Brighton, England Permanent My Client is recruiting for a Principal Electrical Engineer in the Water SectorWe are seeking multiple Principal Electrical Design Engineers to lead technical delivery across major long‑term water industry frameworks UK‑wide. Skills, qualifications and experience: D

Requisition ID: 1505ERP Eligible?: YesERP amount: 1,800Type: ExemptShift: 1Clearance Prior to Start: SCFinal Clearance: DVExperience Level: Experienced ProfessionalFT/PT/Casual: FullTimeDepartment: MFC-LMUK AmpthillBusiness Unit: MFC-LMUK AmpthillAbout the roleReporting to the Design Team Lead, the�

You'll also help strengthen our engineering capability by sharing your knowledge, supporting colleagues and embracing innovative technologies that improve the quality and efficiency of project delivery. ABOUT YOUEssentialDegree qualified (or equivalent) in Electrical Engineering or a related discipl

Project, Process, Marine, Naval, Electrical, Electronic, Ex-forces, Renewable, Energy, Engineering, Engineer, Wirral, Liverpool, Birkenhead, MOD, Ships, Vessel, HV, LV, PLC, Switchgear, Offshore. This role would suit a Project Engineer with an ex-forces background, with experience working with elect

Chartered Engineer (CEng) or Incorporated Engineer (IEng), or equivalent experience. Experience mentoring and developing engineering teams. Proven experience leading multidisciplinary engineering projects.

The role requires a recognised engineering apprenticeship or Level 3 engineering qualification and experience in high-volume manufacturing. McCormick is seeking an experienced Maintenance Engineer for double day shift in Aylesbury, UK.

ABOUT THE ROLEAs an Electrical Engineer, you'll support the delivery of electrical and EICA designs across a wide variety of water infrastructure projects, working closely with senior engineers and multidisciplinary teams to develop high-quality engineering solutions. Experience in electrical engine

Eko Talent is seeking a Field Service Engineer in the United Kingdom. Successful candidates will have an engineering/technical background with an electrical bias and experience in maintenance of conveyors, pumps, motors, robotics and.

Launch regulatory inspections as per legal requirements whatever on GSE and material handling equipment as well as on workshop equipment.

Baltic Recruitment are partnering with a market-leading manufacturing organisation to recruit an experienced Multi Skilled Maintenance Technician with a strong electrical bias for a permanent day shift position at the Washington site.Role involves safe preventative maintenance, breakdown response, a

STILL Materials Handling Ltd is seeking a Field Service Engineer to service and maintain a range of STILL forklift and material handling equipment across customer sites in the SR/DH postcode areas. The ideal candidate has mechanical or electrical engineering experience, a valid UK driving licence, a

MARCH is seeking a mechanically minded Service Engineer to join our growing team across the UK.

Just Recruitment is seeking a Field Service Engineer to cover the South, ideally based in Bedfordshire and surrounding areas. The role requires a background in field service or technical support within capital equipment, with a Level 3+ electrical installation/engineering/maintenance qualification (