Marine engineer jobs in GlasgowCreate job alerts

12 Month Contract \n Rate open to negotiation (Inside IR35) \n Hybrid Working – 1 – 2 days per week on site with some flexibility as the contract progresses \n Job Role: \n The Senior Auxiliary Engineer will support the design, integration, and technical assurance of various auxiliary systems across a complex marine platform. They will apply deep expertise in system performance, capacity assessment, and optimisat... \n \n ZIPC1_UKTJ

Delivering major marine infrastructure demands accurate setting out, strong site control and an engineer who understands how civils work comes together on the ground. As a Site Engineer, you’ll work on a substantial Fort William project covering new slipways, berthing infrastructure, earthworks, drainage and concrete works. \n With accommodation provided alongside a vehicle and fuel card, this is particularly well suited to someone happy to work away during the week. The project has a 64-week programme, with an immediate start available and the initial contract expected to run for at least six months. \n What’s in it for you \n\n • £300–£400 per day, depending on experience\n, • Accommodation provided for the duration of the assignment\n, • Van or Jeep supplied, including a fuel card and use for travel to and from home\n, • Opportunity to work on a significant marine infrastructure and civils project\n, • Potential for the initial six-month contract to be extended\n, • Weekend overtime available, normally with a 1.5x uplift subject to agreement\n\n Your responsibilities as Site Engineer \n\n • Carry out accurate setting out using EDM and GPS equipment\n, • Monitor site works across earthworks, drainage, kerbing and reinforced concrete structures\n, • Support delivery of two new slipways, an overnight berthing structure and associated parking and marshalling areas\n, • Monitor works including dredging, sheet piling, concrete works and surfacing\n, • Complete QA documentation and raise RFIs and ITPs as required\n, • Help ensure work is delivered safely, accurately and in line with project requirements\n\n What we’re looking for in a Site Engineer \n\n • Previous experience working on civil engineering projects involving earthworks, drainage, kerbing or reinforced concrete structures\n, • Practical setting-out experience using EDM and GPS equipment\n, • Experience completing QA documentation, RFIs and ITPs\n, • Ability to monitor construction works against drawings, specifications and project requirements\n, • Relevant civil engineering or construction qualifications\n\n Working hours: Monday to Friday, with some Saturday working required. Weekend overtime arrangements to be agreed. \n Ready to get started? Apply now for this Site Engineer contract with an up-to-date CV for earliest consideration. \n Candidate Source Ltd is an advertising agency. Once you have submitted your application it will be passed to the third party Recruiter who is responsible for processing your application. This will include holding and sharing your personal data, our legal basis for this is legitimate interest subject to your declared interest in a job. Our privacy policy can be found on our website and we can be contacted to confirm who your application has been forwarded to.

Role: Embedded Software Engineer \n Location: Glasgow \n Onsite: 2-3 days a week \n Seeking £45,000 - £50,000 but negotiable \n \n This role is Exclusive to Cortech \n \n About the role: \n \n As Embedded Software Engineer, you design, build and debug the embedded software and firmware that run inside hardware sensor integration, control systems and communication for our stunning, monitoring and biomass products operating in demanding marine environments. \n You report to the Head of Software and work closely with the Head of Hardware/Devices’ engineering team, whose devices you bring to life in software, and with the Lead of ML & AI on integrating models at the edge. \n \n You’ll be involved across the full lifecycle from requirements through implementation, testing and field deployment working directly with hardware engineers, data scientists and aquaculture specialists. \n \n \n What you’ll be doing \n \n\n • Design, develop and debug embedded software and firmware for aquaculture monitoring and control systems sensor integration, automated systems, water quality and biomass monitoring devices.\n, • Write clean, efficient, well-documented code for embedded systems (Python and/or C/C++ as appropriate).\n, • Work with microcontrollers, microprocessors and real-time operating systems (RTOS).\n, • Implement communication protocols (MQTT, UART, SPI, I2C, Ethernet, Bluetooth, LoRaWAN) for data transmission and device control.\n, • Integrate software with hardware components including sensors, actuators and communication modules.\n, • Develop and run unit, integration and system tests to ensure embedded software quality and reliability.\n, • Troubleshoot and debug combined software and hardware issues, working with the Head of Hardware/Devices’ team.\n, • Support the full development lifecycle from requirements through implementation, testing and deployment.\n, • Stay current with embedded software and IoT best practice relevant to marine and industrial environments.\n\n \n You’ll ideally have: \n \n\n • A degree in Computer Science, Electrical Engineering or a related field, or equivalent practical experience.\n, • Proven experience (typically 2+ years) developing embedded software and firmware.\n, • Strong programming skills for embedded systems (Python and/or C/C++).\n, • Experience with microcontrollers and microprocessors (e.g. ARM Cortex-M, ESP32, NVIDIA Jetson).\n, • Solid understanding of communication protocols (UART, SPI, I2C, Ethernet, Bluetooth, LoRaWAN, MQTT, Modbus).\n, • Experience with embedded debugging tools and techniques (JTAG, oscilloscopes, logic analysers).\n, • Ability to read and work from hardware schematics and datasheets.\n\n \n It would be great if you also have: \n \n\n • Experience with cloud platforms (AWS, Azure, GCP) and IoT services.\n, • Familiarity with data acquisition and processing techniques, and control systems/algorithms.\n, • Experience with version control (Git) and agile development.\n, • Aquaculture, agri-tech or environmental monitoring sector experience.\n\n \n The successful candidate will be: \n \n\n • Comfortable working across the hardware/software boundary.\n, • A strong problem-solver, methodical in debugging combined hardware/software issues.\n, • Collaborative, working closely with hardware engineers and scientists.\n, • Self-starting and comfortable with ambiguity.\n\n \n \n What we offer: \n \n · Competitive salary, based on experience \n · 30 days annual leave (including bank holidays) \n · Death in service at 4 x your annual salary \n · Employee Assistance Programme \n · Enhanced parental leave policies \n · Birthday day off \n · Paid bereavement and sick leave \n · Company salary sacrifice pension scheme \n · Cycle to work scheme \n · Regular social breakfasts, lunches and team events \n \n \n How to Apply? \n \n Apply now or send your CV to danni@cortechtalentsolutions.co.uk

Delivering major marine infrastructure demands accurate setting out, strong site control and an engineer who understands how civils work comes together on the ground. As a Site Engineer, you’ll work on a substantial Fort William project covering new slipways, berthing infrastructure, earthworks, drainage and concrete works. With accommodation provided alongside a vehicle and fuel card, this is particularly well suited to someone happy to work away during the week. The project has a 64-week programme, with an immediate start available and the initial contract expected to run for at least six months. What’s in it for you £300–£400 per day, depending on experience Accommodation provided for the duration of the assignment Van or Jeep supplied, including a fuel card and use for travel to and from home Opportunity to work on a significant marine infrastructure and civils project Potential for the initial six-month contract to be extended Weekend overtime available, normally with a 1.5x uplift subject to agreement Your responsibilities as Site Engineer Carry out accurate setting out using EDM and GPS equipment Monitor site works across earthworks, drainage, kerbing and reinforced concrete structures Support delivery of two new slipways, an overnight berthing structure and associated parking and marshalling areas Monitor works including dredging, sheet piling, concrete works and surfacing Complete QA documentation and raise RFIs and ITPs as required Help ensure work is delivered safely, accurately and in line with project requirements What we’re looking for in a Site Engineer Previous experience working on civil engineering projects involving earthworks, drainage, kerbing or reinforced concrete structures Practical setting-out experience using EDM and GPS equipment Experience completing QA documentation, RFIs and ITPs Ability to monitor construction works against drawings, specifications and project requirements Relevant civil engineering or construction qualifications Working hours: Monday to Friday, with some Saturday working required. Weekend overtime arrangements to be agreed. Ready to get started? Apply now for this Site Engineer contract with an up-to-date CV for earliest consideration. Candidate Source Ltd is an advertising agency. Once you have submitted your application it will be passed to the third party Recruiter who is responsible for processing your application. This will include holding and sharing your personal data, our legal basis for this is legitimate interest subject to your declared interest in a job. Our privacy policy can be found on our website and we can be contacted to confirm who your application has been forwarded to

We are recruiting on behalf of a well-established engineering organisation in the Glasgow area for an experienced Hydraulic Fitter / Hydraulic Engineer. This is an excellent opportunity to join a growing business specialising in hydraulic systems, supporting a diverse range of marine, industrial and engineering projects. The successful candidate will have a strong background in hydraulic systems, mechanical fitting, and ideally the manufacture and assembly of hydraulic hose assemblies. A key part of this role will involve working on hydraulic cylinders/rams, hydraulic pumps and motors, and hydraulic power units (HPUs) across maintenance, overhaul and repair activities. The role offers varied and hands-on work, excellent overtime opportunities, and long-term career development within a respected engineering organisation. The position is primarily based in Glasgow; however, there may be occasional travel and short periods of working away on projects along the South Coast, typically involving only a few nights away at a time. Due to the nature of some projects, applicants must be eligible to obtain UK Security Clearance. Key Responsibilities Install, maintain and repair hydraulic systems and components to industry and customer standards. Manufacture, assemble and test hydraulic hose assemblies and related hydraulic equipment. Carry out hydraulic fault finding, diagnostics, root cause analysis and repairs. Read and interpret hydraulic schematics, engineering drawings and technical documentation. Assemble, overhaul and refurbish hydraulic cylinders/rams, pumps, motors, valves and related components. Carry out maintenance, servicing and repair of hydraulic power units (HPUs). Assist with the testing, commissioning and validation of hydraulic systems, HPUs and associated equipment. Support marine, industrial and engineering maintenance, installation and repair activities. Work closely with engineering and project teams to deliver high-quality solutions for customers. Complete maintenance records, job reports and associated documentation. Ensure all work is carried out safely and in accordance with company quality standards and procedures. Requirements Proven experience as a Hydraulic Fitter, Hydraulic Engineer, Mechanical Fitter or similar engineering role. Strong hands-on experience working with hydraulic systems and components. Proven experience maintaining, repairing and overhauling hydraulic cylinders/rams, pumps, motors and hydraulic power units (HPUs). Experience manufacturing and assembling hydraulic hose assemblies. Ability to diagnose and repair hydraulic faults effectively across complete hydraulic systems. Good understanding of hydraulic drawings, schematics and engineering documentation. Strong mechanical fitting and assembly skills. Full UK Driving Licence. Eligible to obtain UK Security Clearance (SC). Willingness to travel occasionally and work away from home for short periods when required. Desirable Marine engineering experience. Industrial, manufacturing or heavy engineering background. Experience commissioning hydraulic systems and equipment. Hydraulic qualifications or manufacturer training. Experience working within hydraulic hose assembly manufacturing or fluid power environments. Working Hours Monday to Thursday: 08:00 - 16:30 Friday: 08:00 - 13:30 Overtime Monday to Saturday: Time and a Half (1.5x) Sunday: Double Time (2x) Overtime paid following completion of standard contracted hours. Package Competitive salary, negotiable depending on experience and expertise. Excellent overtime earning potential. Opportunity to work on a varied range of hydraulic, marine and industrial engineering projects. Ongoing training and professional development. Long-term career progression within a growing engineering organisation. Company-supported travel and accommodation for any required working away assignments. About You You will be a practical, hands-on engineer with strong hydraulic experience and a proactive approach to problem solving. Previous experience working on hydraulic cylinders/rams, pumps, motors and hydraulic power units (HPUs) would be advantageous. Candidates from marine, industrial, manufacturing, heavy engineering or fluid power environments are encouraged to apply

\n Scotland | Hybrid Working | International Travel \n Competitive Salary + Annual Bonus + Excellent Benefits \n Escape Recruitment is delighted to be partnering with a global engineering organisation to recruit a Technical Sales Manager to join its expanding commercial team. \n This is an excellent opportunity to join a global manufacturer of highly engineered products, supplying customers across international markets. You'll take ownership of complex sales opportunities, build strategic customer relationships and play a key role in driving commercial growth. \n This newly created position forms part of the company's continued investment in its commercial function, providing the successful candidate with the opportunity to influence business development strategy while working alongside engineering, project management and international sales teams. \n The Role \n Reporting to the Sales Director, you'll be responsible for managing the full sales lifecycle, from identifying opportunities within existing accounts and developing new business through to preparing technical and commercial proposals, negotiating contracts and securing orders. \n This is a consultative sales role focused on understanding customer challenges, developing tailored engineering solutions and managing complex sales campaigns with customers around the world. \n This is primarily an office-based role to support collaboration with the wider commercial and engineering teams, with hybrid flexibility available once established in the role. International travel is expected, typically once or twice per month. \n Key responsibilities include: \n \n • Managing technical sales opportunities from initial enquiry through to contract award.\n, • Preparing commercially and technically robust quotations and proposals.\n, • Building long-term relationships with customers, OEMs, EPCs, distributors and international sales teams.\n, • Identifying and developing new business opportunities across existing and emerging markets.\n, • Managing long sales cycles and maintaining an accurate sales pipeline using CRM.\n, • Working closely with engineering, project management, purchasing and commercial teams to deliver customer-focused solutions.\n, • Negotiating commercial agreements for high-value engineered products and systems.\n, • Representing the business at customer meetings, exhibitions and international industry events.\n, • Gathering market intelligence to identify new commercial opportunities and support future product development.\n, • Supporting regional sales teams with technical and commercial expertise.\n \n About You \n You'll be an experienced Technical Sales Manager or Sales Engineer with a successful background selling engineered products or technical solutions into industrial markets. \n This is a hands-on, operational sales role with genuine scope to progress into a Sales Leadership position as the business continues to grow. \n We would welcome applications from candidates with backgrounds in: \n \n • Mechanical Engineering\n, • Pumps & Rotating Equipment\n, • Capital Equipment\n, • Oil & Gas\n, • Marine\n, • Industrial Manufacturing\n, • Process Industries\n, • Water & Wastewater\n, • Heavy Engineering\n \n You'll bring: \n \n • A proven track record in technical, consultative B2B sales.\n, • Experience selling complex engineered products or systems.\n, • The ability to understand technical specifications and translate customer requirements into commercial solutions.\n, • Strong commercial awareness with excellent negotiation skills.\n, • Experience managing lengthy sales cycles and multiple stakeholders.\n, • A proactive approach to business development and identifying new opportunities.\n, • Excellent relationship-building and communication skills.\n, • The willingness to travel internationally as required.\n \n

Senior Control System Engineer Base Location: Flexible UK, however our preference is that you will be based in one of our key UK sites, which includes but is not limited to: - Glasgow, Perth, Aberdeen, Inverness. Role Details: As a Control Systems Engineer, you will provide technical expertise within our Engineering Control Systems team, working primarily on Offshore & Onshore (when required) Renewable energy projects. Working closely with the Technical Authority and project teams, you'll be responsible for leading and coordinating the Control System design and development, overseeing the complete system integration from feasibility to project handover. You will also be accountable for driving Value and Innovation for the Controls Engineering team, identifying and implementing new technologies and best practices which reduce costs and/or improve performance of assets. Some other main accountabilities will include: Working with other engineering disciplines such as Civil, Mechanical and Electrical for coordination of works. Working across and supporting several offshore project packages including Marine, ESI, Turbines and Cables Travel to control centres and offshore installations to support construction and commissioning activities Drafting Employers Requirement Specifications for the Control System and support the project team during the supplier selection process. Reviewing supplier documentation for compliance with company technical standards. Attending various Factory Acceptance Tests and Site Acceptance Tests for the Control System and SCADA equipment. Designing and configuring PLC based Control Systems, SCADA platforms and the associated network architectures. Role Requirements: A good understanding of the development and construction of Renewable Energy projects. Experience in the design of PLC based control systems including hardware/panel design as well as software logic and database configuration using standardised control programming languages. Demonstrable experience with typical renewables offshore control and monitoring system including maritime aids to navigation, cable monitoring and protection systems, HV control and protection systems Working knowledge of mission critical communications systems such as DMR, TETRA, private LTE/5G/4G and associated infrastructure Experience of design, commissioning and operations of offshore substations and installations Knowledge of Ethernet and serial-based communication protocols, such as Modbus, DNP3, OPC, ODBC, IEC (phone number removed)-104 and IEC61850. An understanding of OT Cyber Security industry standards and current best practices such as IEC62443. Previous experience working with any of the major WTG SCADA systems, second tier SCADA systems, remote control centres or other Renewable Energy Control Systems is desirable. Current GWO and medical certification is desirableAn innovative mind-set and a flexible approach, along with excellent communication skills that allow you to engage effectively with varying levels of stakeholders across the business and beyond ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit

Control System Engineer Base Location: Glasgow, Perth or Aberdeen Role Details: As a Control Systems Engineer, you will provide technical expertise within our Engineering Control Systems team, working primarily on Offshore & Onshore (when required) Renewable energy projects. Working closely with the Technical Authority and project teams, you'll be responsible for leading and coordinating the Control System design and development, overseeing the complete system integration from feasibility to project handover. You will also be accountable for driving Value and Innovation for the Controls Engineering team, identifying and implementing new technologies and best practices which reduce costs and/or improve performance of assets. Some other main accountabilities will include: Working with other engineering disciplines such as Civil, Mechanical and Electrical for coordination of works. Working across and supporting several offshore project packages including Marine, ESI, Turbines and Cables Travel to control centres and offshore installations to support construction and commissioning activities Drafting Employers Requirement Specifications for the Control System and support the project team during the supplier selection process. Reviewing supplier documentation for compliance with company technical standards. Attending various Factory Acceptance Tests and Site Acceptance Tests for the Control System and SCADA equipment. Designing and configuring PLC based Control Systems, SCADA platforms and the associated network architectures. Role Requirements: A good understanding of the development and construction of Renewable Energy projects. Experience in the design of PLC based control systems including hardware/panel design as well as software logic and database configuration using standardised control programming languages. Demonstrable experience with typical renewables offshore control and monitoring system including maritime aids to navigation, cable monitoring and protection systems, HV control and protection systems Working knowledge of mission critical communications systems such as DMR, TETRA, private LTE/5G/4G and associated infrastructure Experience of design, commissioning and operations of offshore substations and installations Knowledge of Ethernet and serial-based communication protocols, such as Modbus, DNP3, OPC, ODBC, IEC (phone number removed)-104 and IEC61850. An understanding of OT Cyber Security industry standards and current best practices such as IEC62443. Previous experience working with any of the major WTG SCADA systems, second tier SCADA systems, remote control centres or other Renewable Energy Control Systems is desirable. An innovative mind-set and a flexible approach, along with excellent communication skills that allow you to engage effectively with varying levels of stakeholders across the business and beyond ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit

Our client, a key player in the Defence & Security sector, is seeking a Senior Engineer specialising in Mechanical Auxiliary Systems for a 12-month contract. The role is based in Scotstoun, with hybrid working available. This engaging position focuses on the design, integration, and technical assurance of auxiliary systems within a complex marine platform. Key Responsibilities: Prepare specifications and develop Stage 1 Auxiliary System design solutions, ensuring compliance with quality and technical standards. Support and participate in the Zonal Integration process, ensuring 3D model designs reflect design intent and meet relevant standards and requirements. Develop, maintain, and modify engineering processes and procedures in response to technical developments and operational needs. Conduct technical analyses and investigations, evaluating and selecting technical options, and preparing reports with recommendations. Serve as the specialist point of contact for customers and suppliers on engineering matters to resolve issues and align on priorities and objectives. Provide guidance to less experienced team members to support their effective work and development. Make informed engineering decisions within the scope of responsibility. Job Requirements: Experience in engineering within the Defence, Oil & Gas, Nuclear, or Building Services industries. Significant knowledge and experience of shipbuilding, operations processes, and modern build strategies. Proficiency in processes and tools used in Marine Engineering. Experience with supplier and customer engagements. Skilled in writing technical specifications. A degree in engineering or a related discipline is advantageous but not essential. Competencies: Engineering Theoretical Knowledge Developing Technical Solutions Understanding Requirements Solution Evaluation Interpersonal Skills If you possess expertise in mechanical auxiliary systems within the Defence & Security sector, and are looking for a contract role where you can make a significant impact, we would love to hear from you. Apply now to join our client's team in Scotstoun

Position: Electrical, Instrumentation & Automation Manager Location: Glasgow Department: Operations Providing Electrical, Instrumentation, Automation, and Navcom support to the assigned fleet. Managing EIA functions to ensure safe, cost‑effective, and environmentally compliant vessel operations. Attending vessels for dry dockings, projects, repairs, sea/gas trials, and surveys as required. • Maintain the highest standards of safety and environmental compliance across all electrical, instrumentation, automation and NavCom activities within operations., • Ensure full compliance with the company management system, HSErequirements, and maintenance philosophy., • Act as the subject matter expert for EIA systems related to LNG and/or NGL operations, representingSeapeakat industry events asrequired., • Develop, review, andmaintainfleet-wide EIA programs, policies, and standards, recommending improvements whereappropriate., • Monitor regulatory and legislative developments and advise on their impacttoexisting and future operations., • Review EIA andNavComwork scopes, repair and conversion specifications, and conduct inspections to verify adherence to approved maintenance strategies., • Participate in HSEmeetings, providing technical input and approving incident close-outs., • Ensure strict adherence to the engineering change management process for EIA systems., • Provide technical support and guidance on the company’s management systems, strategic programs, and approved software tools., • Serve as the primary technical interface for Vessel Managers and ship teams,providingoperational advice and troubleshooting support., • Lead and support assigned CAPEX projects, including modifications and upgrades,monitoringimplementationand providing feedback for future budget planning., • Support Marine HR with ETO technical interviews, onboarding, familiarization, and identification ofappropriate technicaltraining., • Participate in ship team operational meetings andassistwith the resolution of reported defects and operational issues., • Analyseoperational and maintenance data toidentifytrends, prepare summary reports, and recommend performance improvements., • Develop fleet-specific strategies and best practices for the operation and maintenance of EIA systems., • Manage assigned EIA projects, including major repairs, investigations, programs, and associated stakeholder engagement., • Supportnewbuildand project specification reviews, includingselectionand evaluation of EIA andNavComequipment and assessment ofnew technologiesfornewbuildsand retrofits., • Develop andmaintaindesign criteria for EIA systems., • The immediate right to live and work in the United Kingdom., • Education and training as an electrical engineer., • Knowledge of applicable electrical, instrumentation and automation systems., • Knowledge and experience in the marine industry., • Knowledge of technical operations., • Familiar with current technology and industry regulations., • Demonstrates teamwork, interpersonal and communications skills., • Ability to respond positively to customers in an effective manner., • Experience of LNG vessels or NGL vessels either in a seafarer or superintendency role., • Hybrid working. Although you are welcome to work in our Finnieston office full time, you are able to work from home up to 2 days per week after completing the probationary period., • 36 days’ annual leave inclusive of public holidays, raising to 41 with continued service., • Private health, dental, and travel cover., • Annual bonus programme., • Additional annual bonus used to promote employee wellbeing., • Up to 9% employer pension contributions., • Life assurance equivalent to four times your annual salary., • Enhanced family friendly and company sick leave/pay., • Cycle to work scheme., • Electric vehicle salary sacrifice car scheme., • Season ticket loan scheme., • Employee assistance programme., • Up to 3 additional days’ leave to promote Seapeak’s commitment to corporate social responsibility (CSR) – use these days for things such as volunteer work or to celebrate a significant life event or a religious/cultural holiday. Seapeak is one of the world’s largest independent owner-operators, with ownership interests in over 90 LNG, LPG, Ethane and multigas carriers, and an LNG regasification terminal. With investment from our sponsor, leading alternative investment firm, Stonepeak, there has been a positive repositioning for our company with focus on growth-based commercial diversification. Delivering on our goals to expand our fleet and diversify our portfolio, Seapeak has most recently acquired Evergas for $700 million, which primarily focuses its operations on the shipment of ethane – an even greener global fuel source. Our business is important – we are powering the day-to-day lives of so many – and we are looking to build our Team to support our growth through acquisition and newbuild orders. At Seapeak, we are committed to building successful careers and future leaders. Join us! For the chance to be empowered, to make decisions and be part of a supportive, high-achieving Team. We set the standard for industry. We are solution driven, accountable for results and measured by success. #WeSetTheCourse #J-18808-Ljbffr

Company description Waukesha Bearings are a leading designer and manufacturer of hydrodynamic fluid film bearings, active magnetic bearing systems and seals for high-performing turbomachinery and rotating equipment in oil & gas, power generation, marine and industrial markets. Part of Dover Precision Components, we are an integrated provider of performance-critical solutions for rotating and reciprocating machinery. Read on to fully understand what this job requires in terms of skills and experience If you are a good match, make an application. DOVER PRECISION COMPONENTS Dover Precision Components DPC (the Company) is part of Dover Corporations (the Parent Company) Pumps and Process solutions segment. DPC holds market leading positions globally and delivers performance-critical solutions across the oil & gas, power generation, marine, industrial, chemical and general processing markets. We design and manufacture mission-critical equipment components to deliver more affordable, cleaner energy solutions and enable manufacturers to operate more efficiently. Job description Based at our Waukesha Bearings manufacturing plant in Glasgow, as a Manufacturing Engineer you will be primarily responsible for the creating and planning of CNC programs, utilising CAM software to control contour path machining of metal parts on automatic machine tools, coordinate required tooling and fixturing, whilst supporting our continuous improvement initiatives to positively influence our lean manufacturing efforts. The facility has a broad range of multi-axis milling and turning centres and associated equipment, the workload being a high-mix of customised fluid-film bearings, seals and isolators with typical applications in turbo and industrial machinery, supplying customers throughout Europe and further afield. WHAT YOU WILL DO: Analyse drawings, sketches and design data of parts to determine dimension and configuration of cuts, selection of cutting tools and machine speeds and feed rates Determine reference points and direction of machine cutting paths Analyse routings during programming stage and updates processes to guarantee CNC machine tools are used to their fullest capability Compute angular and linear dimensions, radii and curvatures, and outlines sequence of operations required to machine parts Create CNC Programs in line with routed operations using available software Create set-up documents to supplement written programs Revise and edit programs as necessary to eliminate instruction errors or omissions Observe operation of machine on trial run as necessary to prove programmed instructions Liaise with Manufacturing Engineers and suppliers regarding required tooling and fixturing Develop and maintain standard programming guidelines for both processes and program creation Eliminate hazards through sound engineering practices Attend various operating meetings to support various functions throughout the organization. Actively participate in the improvement process with responsibilities of assisting with any preparation work and follow up activities/action items generated from Kaizen events Support Best Practices to achieve company goals for safety, delivery, cost and quality. Support Continuous Improvement initiatives on safety, quality, delivery, cost and productivity using Lean tools such as A3/A4, PDCA, Standard Work, etc. Required profile A technical or advanced trade qualification in Mechanical Engineering, or closely related field Over 5 years experience in a similar role, within a precision engineering work environment Working knowledge of Lean Manufacturing philosophies and tools Must be fluent in CNC programming and have strong skills in various Microsoft Office packages Experience and working knowledge of CNC Controls such as FANUC or HEIDENHAIN Established experience of CAD/CAM software such as FeatureCAM, EdgeCAM, Vericut What we offer WE DELIVER CUSTOMER SUCCESS Dover Precision Components delivers products and services that enhance performance, improve safety, reduce carbon emissions, and accelerate clean energy adoption, through collaborative customer relationships, expert engineering, and an innovative culture. Our strong Company portfolio is comprised of long products and services offered under Cook Compression, Cook Mechanical Field Services, Waukesha Bearings, Waukesha Magnetic Bearings, Inpro/Seal, Bearings Plus, and FW Murphy Production Controls. Our global footprint reaches more than twelve locations in the Americas and more than six locations in Europe and China. xrnqpay BUILDING POTENTIAL, SUSTAINING PERFORMANCE, BOOSTING FUTURES We are diligent in recognizing our employees needs and providing an enriching experience through professional developmental opportunities. Our authentic, collaborative company culture, combined with a competitive suite of health and welfare offerings, emulates who we are. We are Dover Precision Components, #LifeAtDPC #SWE

Part of the VolkerWessels UK Group, VolkerStevin is an industry-leading civil engineering business, providing complex and innovative engineering solutions across a wide range of sectors including maritime, flood risk management, defence, energy, water and regeneration. Collaborating with, and drawing on the specialist skills of the group's business units we deliver a truly integrated, multidisciplinary service. As we continue to expand our presence within the energy market, we are playing a key role in delivering major electricity transmission and grid infrastructure projects that support the UK's energy future. As such, we are seeking an ambitious Project Director to lead the successful delivery of major energy infrastructure projects. This is an opportunity to join a business with the capability, backing and ambition to deliver large-scale projects that leave a lasting legacy. Working alongside industry-leading professionals, you'll help shape the successful delivery of major National Grid, HVDC and energy infrastructure schemes. This role will have a national scope, covering multiple projects across the UK. About you We're looking for a proven leader with the credibility, commercial acumen and technical understanding to lead major infrastructure programmes at the highest level. • Degree-qualified in Civil Engineering, Electrical Engineering, Construction Management or a related discipline., • Chartered Engineer (CEng), MCIOB, ChPP or equivalent professional accreditation., • Significant experience delivering major infrastructure projects, including significant leadership experience within the energy sector., • Experience delivering National Grid transmission, HVDC, converter station, major cable or 275kV/400kV substation projects., • Proven accountability for project safety, programme delivery, commercial performance, quality and P&L responsibility., • Strong experience leading large multidisciplinary teams across project management, engineering, commercial and construction disciplines., • Excellent NEC3/NEC4 contract knowledge, with strong programme, risk and change management expertise., • The ability to build trusted relationships and influence senior clients, stakeholders, supply chain partners and executive teams., • A track record of driving safe delivery, programme certainty, commercial success and high-performing project cultures. If your past experience doesn't match perfectly with every requirement of the job description, we still encourage you to apply. You may be just the right candidate for us. Why work with us? VolkerStevin is under the umbrella of VolkerWessels UK which is a multidisciplinary contractor that delivers innovative engineering solutions across the civil engineering and construction sectors including rail, highways, airport, marine, energy, water, and environmental infrastructure. By utilising the specialist skills of each business unit within VolkerWessels UK, VolkerStevin are able to ensure our staff provide unrivalled resources and expertise to our clients. We offer competitive rewards and benefits, recognising the value we place on our employees. We offer a range of benefits, including: • Competitive salary, • Competitive annual leave and an additional day off on your birthday, • Option to buy additional annual leave, • Private medical care, • Pension, • Life Assurance, • Cycle to Work scheme, • Shopping and restaurants vouchers, rewards, and discounts, • Training and development opportunities-comprehensive skills-based training, • Family friendly polices including enhanced maternity benefits, • Employee Assistance, • Flexible working opportunities programme • Mental health, physical health, and financial support, • 24/7 Virtual GP service Fairness, inclusion and respect We believe in pushing boundaries in the pursuit of fairness, inclusion and respect. So, our teams can be comfortable that, whatever their background, VolkerWessels UK is a place where they can be themselves and thrive. If you need support with your application, please contact us at Additional information Note for Recruitment Agencies: Our preference is to hire directly, and we will reach out to our Preferred Supplier List (PSL) agencies if this particular role qualifies for release. We kindly request that you refrain from sending speculative CVs. In the event of speculative CV submissions, no fees will be applicable, and we kindly ask that all inquiries to be directed VolkerWessels UK is committed to maintaining healthy, safe and productive working conditions for its entire staff and therefore a drugs & alcohol screening is mandatory for all. JBRP1_UKTJ

Are you a Royal Navy Marine Engineer preparing to leave the Service, or an experienced Marine Engineer looking for your next challenge? Do you have hands-on experience servicing and repairing ABB/Accelleron, MAN or MET marine turbochargers? I am currently recruiting on behalf of my client for a Marine Field Service Engineer to join a specialist engineering business supporting the global shipping industry. This is a technically demanding, hands-on role where you'll be responsible for servicing, overhauling and repairing marine exhaust gas turbochargers both in the UK and across the globe. This opportunity will particularly suit engineers who thrive in a field service environment and enjoy worldwide travel. Due to the nature of the role, you should be comfortable spending extended periods away from home, working overtime when required and participating in an on-call rota to support customers. Overtime is paid, and all travel and accommodation expenses are covered whilst working away. Marine Field Service Engineer Responsibilities: • Service, overhaul and repair marine exhaust gas turbochargers., • Carry out planned maintenance, inspections and mechanical fault finding on customer equipment., • Work on turbochargers manufactured by ABB/Accelleron, MAN and MET., • Strip, inspect, measure and rebuild components to manufacturer specifications., • Produce accurate service reports and technical documentation., • Work both within the Southampton workshop and at customer sites throughout the UK and worldwide., • Respond to planned maintenance and breakdown support requirements., • Maintain the highest standards of health, safety and customer service. Marine Field Service Engineer Requirements: • Hands-on experience servicing and repairing ABB/Accelleron, MAN or MET marine turbochargers., • Previous experience within a marine engineering environment., • Strong mechanical engineering, overhaul and fault-finding skills., • Experience using precision measuring equipment and working to engineering tolerances., • Excellent written and verbal communication skills with the ability to produce technical reports., • Full UK driving licence., • A flexible approach to working, including extensive worldwide travel, regular overnight stays, overtime and participation in an on-call rota. Marine Field Service Engineer Benefits: • Overtime paid., • Company vehicle., • Company mobile phone., • Company tools, PPE and uniform., • Workplace pension., • Employee Health Plan., • 22 days annual leave plus Bank Holidays., • All business travel, accommodation and expenses covered whilst working away. NOTE: Our client encourages applications from both commercial and ex-military candidates. Due to the specialist nature of this position, applicants must have hands-on experience servicing and repairing ABB/Accelleron, MAN or MET marine turbochargers. JBRP1_UKTJ

Technical Sales Executive (Marine / Instrumentation).Company Car + Progression to Sales Leadership + Training + Company Benefits.South of England (Field Based).Are you a Sales Engineer or Marine Engineer looking to join a growing international engineering group where you can utilise your technical e

As Project Lead Engineer you drive engineering delivery for onshore and marine systems, ensuring designs are safe, compliant, and aligned with stakeholder goals.You guide multidisciplinary teams and support decision-making through the full lifecycle, from concept to completion.You’ll work with pro

James Fisher and Sons plc is seeking two Mechanical Engineers in Inchinnan, Hybrid, to deliver innovative design solutions and provide through-life engineering support across the JFD product range. A mechanical engineering degree or equivalent experience is required, with expertise in design calcula

Malin Marine Consultants is seeking a Senior Nuclear Safety Engineer to lead the delivery and technical oversight of nuclear safety across projects, ensuring requirements are embedded throughout the infrastructure lifecycle and providing expert assurance for other business units within Malin Group o

If you’re an ambitious engineer looking to make a real impact on complex, high‑profile civil engineering projects across the UK and internationally, this opportunity stands out. Our client is a specialist consultancy working at the forefront of major infrastructure and coastal/marine development

Fairhurst in Glasgow is seeking a Marine Engineer with Ports & Harbours Design experience. The successful candidate will engage in the design, assessment, and delivery of marine structures while supporting project management activities. Ideal applicants should hold a degree in Civil Engineering and

The Marine Engineer will contribute to the design, assessment, and delivery of marine structures and coastal infrastructure, supporting the technical and project management aspects of marine engineering work. This role offers an unparalleled opportunity to work alongside a dedicated team of engineer

As a Marine Engineer, you will respond to customer’s Marine repair and service requests. As a Marine Engineer, you will respond to customer’s Marine repair and service requests. As a Finning Engineer you will receive.

Launch your engineering career with one of Scotland’s leading marine and coastal engineering consultancies. At Wallace Stone, we have been delivering award-winning civil engineering solutions since 1973, specialising in marine infrastructure, coastal engineering and bridges across Scotland. Exposu

A marine engineering firm is seeking Detail Design Engineers for its Glasgow office.

We require a proactive, professional engineer with a HND in civil/construction and membership progress with the Engineering. Caledonian Maritime Assets Limited (CMAL) is recruiting Civil Engineers to deliver our portfolio of harbour infrastructure projects, adopting new technologies to upgrade facil

A major engineering firm in Glasgow is seeking a Principal Civil Engineer to lead and ensure technical delivery for projects in onshore and marine systems.This role requires strong civil/structural engineering expertise and experience in the UK nuclear sector.Ideal candidates will have a degree in C

Clyde Marine Recruitment is seeking a 2nd Engineer to join Cargo RoRo starting 9th October for a 10-week contract, with potential permanency. Must hold 2nd Engineer Unlimited COC, STCW and ENG1.

AERIUS Marine UK seeks an Electrical Systems Engineer to support tender responses and to develop HVAC operation and control systems across the full product lifecycle.You will produce design documentation and provide technical support through commissioning and upgrades.Role requires translating clien

Wallace Stone LLP in Glasgow is seeking a Graduate or Early Career Civil Engineer to join our team and contribute to marine and coastal infrastructure projects across Scotland, from harbours and piers to breakwaters and bridges.

Matchtech is seeking a Senior Engineer specializing in Mechanical Auxiliary Systems for a 12-month contract in Scotstoun, with hybrid working options. The role focuses on design, integration, and technical assurance of auxiliary systems within a marine platform project. Responsibilities include spec

Finning (UK) Ltd is seeking a Marine Engineer in the United Kingdom to respond to marine repair and service requests, diagnose problems and prepare comprehensive quotes for customers efficiently. Based in Scotland, you will work within Finning’s leading field service department on Caterpillar/MAK

Clyde Marine Recruitment is seeking an Engineering Officer (Third Engineer) to join chemical and products tankers on a 4-month contract. The role is based in Glasgow, United Kingdom, and offers a finite-term opportunity for experienced marine engineers.

Our client, a key player in the Defence & Security sector, is seeking a Senior Engineer specialising in Mechanical Auxiliary Systems for a 12-month contract. The role is based in Scotstoun, with hybrid working available. This engaging position focuses on the design, integration, and technical assurance of auxiliary systems within a complex marine platform. Key Responsibilities: Prepare specifications and develop Stage 1 Auxiliary System design solutions, ensuring compliance with quality and technical standards. Support and participate in the Zonal Integration process, ensuring 3D model designs reflect design intent and meet relevant standards and requirements. Develop, maintain, and modify engineering processes and procedures in response to technical developments and operational needs. Conduct technical analyses and investigations, evaluating and selecting technical options, and preparing reports with recommendations. Serve as the specialist point of contact for customers and suppliers on engineering matters to resolve issues and align on priorities and objectives. Provide guidance to less experienced team members to support their effective work and development. Make informed engineering decisions within the scope of responsibility. Job Requirements: Experience in engineering within the Defence, Oil & Gas, Nuclear, or Building Services industries. Significant knowledge and experience of shipbuilding, operations processes, and modern build strategies. Proficiency in processes and tools used in Marine Engineering. Experience with supplier and customer engagements. Skilled in writing technical specifications. A degree in engineering or a related discipline is advantageous but not essential. Competencies: Engineering Theoretical Knowledge Developing Technical Solutions Understanding Requirements Solution Evaluation Interpersonal Skills If you possess expertise in mechanical auxiliary systems within the Defence & Security sector, and are looking for a contract role where you can make a significant impact, we would love to hear from you. Apply now to join our client's team in Scotstoun

Delivering major marine infrastructure demands accurate setting out, strong site control and an engineer who understands how civils work comes together on the ground. As a Site Engineer, you’ll work on a substantial Fort William project covering new slipways, berthing infrastructure, earthworks, drainage and concrete works. With accommodation provided alongside a vehicle and fuel card, this is particularly well suited to someone happy to work away during the week. The project has a 64-week programme, with an immediate start available and the initial contract expected to run for at least six months. What’s in it for you £300–£400 per day, depending on experience Accommodation provided for the duration of the assignment Van or Jeep supplied, including a fuel card and use for travel to and from home Opportunity to work on a significant marine infrastructure and civils project Potential for the initial six-month contract to be extended Weekend overtime available, normally with a 1.5x uplift subject to agreement Your responsibilities as Site Engineer Carry out accurate setting out using EDM and GPS equipment Monitor site works across earthworks, drainage, kerbing and reinforced concrete structures Support delivery of two new slipways, an overnight berthing structure and associated parking and marshalling areas Monitor works including dredging, sheet piling, concrete works and surfacing Complete QA documentation and raise RFIs and ITPs as required Help ensure work is delivered safely, accurately and in line with project requirements What we’re looking for in a Site Engineer Previous experience working on civil engineering projects involving earthworks, drainage, kerbing or reinforced concrete structures Practical setting-out experience using EDM and GPS equipment Experience completing QA documentation, RFIs and ITPs Ability to monitor construction works against drawings, specifications and project requirements Relevant civil engineering or construction qualifications Working hours: Monday to Friday, with some Saturday working required. Weekend overtime arrangements to be agreed. Ready to get started? Apply now for this Site Engineer contract with an up-to-date CV for earliest consideration. Candidate Source Ltd is an advertising agency. Once you have submitted your application it will be passed to the third party Recruiter who is responsible for processing your application. This will include holding and sharing your personal data, our legal basis for this is legitimate interest subject to your declared interest in a job. Our privacy policy can be found on our website and we can be contacted to confirm who your application has been forwarded to

12 Month Contract Rate open to negotiation (Inside IR35) Hybrid Working – 1 – 2 days per week on site with some flexibility as the contract progresses Job Role: The Senior Auxiliary Engineer will support the design, integration, and technical assurance of various auxiliary systems across a complex marine platform. They will apply deep expertise in system performance, capacity assessment, and optimisation to deliver robust, compliant, and customer focused solutions throughout the shipbuilding lifecycle. The role ensures high engineering standards by driving improvements to processes, supporting technical investigations, and providing evidence-based decision making. Strong marine/auxiliary systems experience is essential to ensuring system reliability and capability across the platform. Key Responsibilities: Preparing specifications, develop Stage 1 Auxiliary System design solutions in line with specifications and all quality and technical standards. Support and participate within the Zonal Integration process ensuring 3D model design reflects design intent and achieves compliance to relevant quality, standards and requirements. Participating in developing, maintaining and modifying engineering processes and procedures in assigned areas in response to technical developments and operational need. Carrying out specialist technical analyses and investigations, including evaluation and selection of technical options, and prepare reports with suggested recommendations to support the resolution of problems and the improvement of engineering capability. Support the Principal engineer as the specialist point of contact with customers and/or suppliers in assigned areas on engineering matters, to resolve problems and issues and to maintain awareness in both parties of priorities and objectives. Provide help and direction to less experienced team members to support both their effective working and their development. Make engineering decisions within own sphere of responsibility. Key Attributes: Degree qualified in an engineering or other related discipline, although not essential. Experience in engineering or a defence related industry, and or Oil & Gas, Nuclear or Building Services. Knowledge and experience of shipbuilding, Operations processes and modern build strategies. Knowledge of processes and tools used in Marine Engineering. Experience with supplier & customer engagements. Experience writing technical specifications

Section Engineer (SC Cleared) | Marine Civils | Contract Role | Tier 1 Contractor A leading Tier 1 contractor is seeking an experienced Section Engineer with active SC Clearance and a strong background in Marine Civils to join a major infrastructure programme on a long-term contract basis. The role will support the delivery of complex marine and waterfront engineering works across a high-profile project environment. The Role Manage engineering activities across a designated section of works. Oversee setting out, surveying and engineering controls. Ensure quality assurance, inspections and ITP compliance. Coordinate subcontractors and site teams. Support programme delivery, productivity and technical problem-solving. Maintain engineering records, permits and site documentation. Requirements Current SC Clearance (essential). Previous experience as a Section Engineer, Senior Section Engineer, Site Engineer or Setting Out Engineer. Strong Marine Civils background including ports, harbours, quays, jetties, dockside developments, coastal defence or offshore infrastructure. Experience working for a Tier 1 contractor, major JV or large infrastructure project. Civil Engineering qualification (HNC/HND/Degree or equivalent). If you are an SC Cleared Section Engineer with proven Marine Civils experience and a background delivering major infrastructure projects, we'd like to hear from you

Control System Engineer Base Location: Glasgow, Perth or Aberdeen Role Details: As a Control Systems Engineer, you will provide technical expertise within our Engineering Control Systems team, working primarily on Offshore & Onshore (when required) Renewable energy projects. Working closely with the Technical Authority and project teams, you'll be responsible for leading and coordinating the Control System design and development, overseeing the complete system integration from feasibility to project handover. You will also be accountable for driving Value and Innovation for the Controls Engineering team, identifying and implementing new technologies and best practices which reduce costs and/or improve performance of assets. Some other main accountabilities will include: Working with other engineering disciplines such as Civil, Mechanical and Electrical for coordination of works. Working across and supporting several offshore project packages including Marine, ESI, Turbines and Cables Travel to control centres and offshore installations to support construction and commissioning activities Drafting Employers Requirement Specifications for the Control System and support the project team during the supplier selection process. Reviewing supplier documentation for compliance with company technical standards. Attending various Factory Acceptance Tests and Site Acceptance Tests for the Control System and SCADA equipment. Designing and configuring PLC based Control Systems, SCADA platforms and the associated network architectures. Role Requirements: A good understanding of the development and construction of Renewable Energy projects. Experience in the design of PLC based control systems including hardware/panel design as well as software logic and database configuration using standardised control programming languages. Demonstrable experience with typical renewables offshore control and monitoring system including maritime aids to navigation, cable monitoring and protection systems, HV control and protection systems Working knowledge of mission critical communications systems such as DMR, TETRA, private LTE/5G/4G and associated infrastructure Experience of design, commissioning and operations of offshore substations and installations Knowledge of Ethernet and serial-based communication protocols, such as Modbus, DNP3, OPC, ODBC, IEC (phone number removed)-104 and IEC61850. An understanding of OT Cyber Security industry standards and current best practices such as IEC62443. Previous experience working with any of the major WTG SCADA systems, second tier SCADA systems, remote control centres or other Renewable Energy Control Systems is desirable. An innovative mind-set and a flexible approach, along with excellent communication skills that allow you to engage effectively with varying levels of stakeholders across the business and beyond ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit

Senior Control System Engineer Base Location: Flexible UK, however our preference is that you will be based in one of our key UK sites, which includes but is not limited to: - Glasgow, Perth, Aberdeen, Inverness. Role Details: As a Control Systems Engineer, you will provide technical expertise within our Engineering Control Systems team, working primarily on Offshore & Onshore (when required) Renewable energy projects. Working closely with the Technical Authority and project teams, you'll be responsible for leading and coordinating the Control System design and development, overseeing the complete system integration from feasibility to project handover. You will also be accountable for driving Value and Innovation for the Controls Engineering team, identifying and implementing new technologies and best practices which reduce costs and/or improve performance of assets. Some other main accountabilities will include: Working with other engineering disciplines such as Civil, Mechanical and Electrical for coordination of works. Working across and supporting several offshore project packages including Marine, ESI, Turbines and Cables Travel to control centres and offshore installations to support construction and commissioning activities Drafting Employers Requirement Specifications for the Control System and support the project team during the supplier selection process. Reviewing supplier documentation for compliance with company technical standards. Attending various Factory Acceptance Tests and Site Acceptance Tests for the Control System and SCADA equipment. Designing and configuring PLC based Control Systems, SCADA platforms and the associated network architectures. Role Requirements: A good understanding of the development and construction of Renewable Energy projects. Experience in the design of PLC based control systems including hardware/panel design as well as software logic and database configuration using standardised control programming languages. Demonstrable experience with typical renewables offshore control and monitoring system including maritime aids to navigation, cable monitoring and protection systems, HV control and protection systems Working knowledge of mission critical communications systems such as DMR, TETRA, private LTE/5G/4G and associated infrastructure Experience of design, commissioning and operations of offshore substations and installations Knowledge of Ethernet and serial-based communication protocols, such as Modbus, DNP3, OPC, ODBC, IEC (phone number removed)-104 and IEC61850. An understanding of OT Cyber Security industry standards and current best practices such as IEC62443. Previous experience working with any of the major WTG SCADA systems, second tier SCADA systems, remote control centres or other Renewable Energy Control Systems is desirable. Current GWO and medical certification is desirableAn innovative mind-set and a flexible approach, along with excellent communication skills that allow you to engage effectively with varying levels of stakeholders across the business and beyond ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit

Scotland | Hybrid Working | International Travel Competitive Salary + Annual Bonus + Excellent Benefits Escape Recruitment is delighted to be partnering with a global engineering organisation to recruit a Technical Sales Manager to join its expanding commercial team. This is an excellent opportunity to join a global manufacturer of highly engineered products, supplying customers across international markets. You'll take ownership of complex sales opportunities, build strategic customer relationships and play a key role in driving commercial growth. This newly created position forms part of the company's continued investment in its commercial function, providing the successful candidate with the opportunity to influence business development strategy while working alongside engineering, project management and international sales teams. The Role Reporting to the Sales Director, you'll be responsible for managing the full sales lifecycle, from identifying opportunities within existing accounts and developing new business through to preparing technical and commercial proposals, negotiating contracts and securing orders. This is a consultative sales role focused on understanding customer challenges, developing tailored engineering solutions and managing complex sales campaigns with customers around the world. This is primarily an office-based role to support collaboration with the wider commercial and engineering teams, with hybrid flexibility available once established in the role. International travel is expected, typically once or twice per month. Key responsibilities include: Managing technical sales opportunities from initial enquiry through to contract award. Preparing commercially and technically robust quotations and proposals. Building long-term relationships with customers, OEMs, EPCs, distributors and international sales teams. Identifying and developing new business opportunities across existing and emerging markets. Managing long sales cycles and maintaining an accurate sales pipeline using CRM. Working closely with engineering, project management, purchasing and commercial teams to deliver customer-focused solutions. Negotiating commercial agreements for high-value engineered products and systems. Representing the business at customer meetings, exhibitions and international industry events. Gathering market intelligence to identify new commercial opportunities and support future product development. Supporting regional sales teams with technical and commercial expertise.About You You'll be an experienced Technical Sales Manager or Sales Engineer with a successful background selling engineered products or technical solutions into industrial markets. This is a hands-on, operational sales role with genuine scope to progress into a Sales Leadership position as the business continues to grow. We would welcome applications from candidates with backgrounds in: Mechanical Engineering Pumps & Rotating Equipment Capital Equipment Oil & Gas Marine Industrial Manufacturing Process Industries Water & Wastewater Heavy EngineeringYou'll bring: A proven track record in technical, consultative B2B sales. Experience selling complex engineered products or systems. The ability to understand technical specifications and translate customer requirements into commercial solutions. Strong commercial awareness with excellent negotiation skills. Experience managing lengthy sales cycles and multiple stakeholders. A proactive approach to business development and identifying new opportunities. Excellent relationship-building and communication skills. The willingness to travel internationally as required

We are recruiting on behalf of a well-established engineering organisation in the Glasgow area for an experienced Hydraulic Fitter / Hydraulic Engineer. This is an excellent opportunity to join a growing business specialising in hydraulic systems, supporting a diverse range of marine, industrial and engineering projects. The successful candidate will have a strong background in hydraulic systems, mechanical fitting, and ideally the manufacture and assembly of hydraulic hose assemblies. A key part of this role will involve working on hydraulic cylinders/rams, hydraulic pumps and motors, and hydraulic power units (HPUs) across maintenance, overhaul and repair activities. The role offers varied and hands-on work, excellent overtime opportunities, and long-term career development within a respected engineering organisation. The position is primarily based in Glasgow; however, there may be occasional travel and short periods of working away on projects along the South Coast, typically involving only a few nights away at a time. Due to the nature of some projects, applicants must be eligible to obtain UK Security Clearance. Key Responsibilities Install, maintain and repair hydraulic systems and components to industry and customer standards. Manufacture, assemble and test hydraulic hose assemblies and related hydraulic equipment. Carry out hydraulic fault finding, diagnostics, root cause analysis and repairs. Read and interpret hydraulic schematics, engineering drawings and technical documentation. Assemble, overhaul and refurbish hydraulic cylinders/rams, pumps, motors, valves and related components. Carry out maintenance, servicing and repair of hydraulic power units (HPUs). Assist with the testing, commissioning and validation of hydraulic systems, HPUs and associated equipment. Support marine, industrial and engineering maintenance, installation and repair activities. Work closely with engineering and project teams to deliver high-quality solutions for customers. Complete maintenance records, job reports and associated documentation. Ensure all work is carried out safely and in accordance with company quality standards and procedures. Requirements Proven experience as a Hydraulic Fitter, Hydraulic Engineer, Mechanical Fitter or similar engineering role. Strong hands-on experience working with hydraulic systems and components. Proven experience maintaining, repairing and overhauling hydraulic cylinders/rams, pumps, motors and hydraulic power units (HPUs). Experience manufacturing and assembling hydraulic hose assemblies. Ability to diagnose and repair hydraulic faults effectively across complete hydraulic systems. Good understanding of hydraulic drawings, schematics and engineering documentation. Strong mechanical fitting and assembly skills. Full UK Driving Licence. Eligible to obtain UK Security Clearance (SC). Willingness to travel occasionally and work away from home for short periods when required. Desirable Marine engineering experience. Industrial, manufacturing or heavy engineering background. Experience commissioning hydraulic systems and equipment. Hydraulic qualifications or manufacturer training. Experience working within hydraulic hose assembly manufacturing or fluid power environments. Working Hours Monday to Thursday: 08:00 - 16:30 Friday: 08:00 - 13:30 Overtime Monday to Saturday: Time and a Half (1.5x) Sunday: Double Time (2x) Overtime paid following completion of standard contracted hours. Package Competitive salary, negotiable depending on experience and expertise. Excellent overtime earning potential. Opportunity to work on a varied range of hydraulic, marine and industrial engineering projects. Ongoing training and professional development. Long-term career progression within a growing engineering organisation. Company-supported travel and accommodation for any required working away assignments. About You You will be a practical, hands-on engineer with strong hydraulic experience and a proactive approach to problem solving. Previous experience working on hydraulic cylinders/rams, pumps, motors and hydraulic power units (HPUs) would be advantageous. Candidates from marine, industrial, manufacturing, heavy engineering or fluid power environments are encouraged to apply

A specialist engineering company focused on the design, manufacture, and installation of bespoke handling systems for industrial and offshore applications is currently seeking a Controls Engineer to join their team. The company is known for delivering high-performance systems across a range of sectors, including energy and heavy industry. This is a customer facing role requiring excellent communication skills and the ability to present complex technical information clearly to both technical and non technical stakeholders. The position involves regular travel and extended periods of working away from home, both within the UK and internationally. Field Service Engineers - Earn £60k Control Systems & Mechanical/Multiskilled £40,000 - £43,000 OTE c£60,000 + Pension, Overtime, 33 Days Holiday, Tax Free Bonus Glasgow. Ref: 25347 The Role: Installation, commissioning, servicing and fault diagnosis of maritime handling systems and associated electrical and control equipment Advanced fault finding on electrical systems, PLC-controlled machinery and variable speed drive systems Modification, debugging and optimisation of PLC programs (primarily Ladder Logic) Configuration, commissioning and troubleshooting of VFDs across multiple manufacturers Interpretation of electrical schematics, control drawings and technical documentation Carry out preventative and reactive maintenance both onshore and offshore Produce detailed service reports, fault reports and technical documentation using MS Office Provide technical support and advice directly to customers on-site Support workshop, documentation and project preparation activities when not deployed Work independently in remote and high-pressure environments, managing faults through to resolution Act as a professional company representative, maintaining strong client relationships and high safety standards Regular UK and international travel with extended periods working away from home The Person: Strong electrically biased background within industrial or marine environments Proven experience with VFD installation, parameterisation and fault diagnosis Extensive PLC experience, particularly with Ladder Logic programming and troubleshooting Strong electrical fault-finding skills on complex electro-mechanical and control systems Good understanding of control panels, MCCs, motors, sensors and safety circuits The successful candidate will be self motivated and capable of working independently in demanding or remote environments. Flexible and willing to travel extensively, including offshore work and time away from home Located in Glasgow, this role would be commutable from East Kilbride, Hamilton and other surrounding areas. For further information call Sharon Hill

The Hydraulic Engineer will work closely with cross-functional teams to deliver high-quality engineering solutions that meet project requirements. The ideal candidate will have a strong background in hydraulic systems and a passion for innovative engineering solutions. Proven experience in hydraulic

You must have at least 112 months at sea as a Fourth Engineer on LNG Vessel.

As a Marine Engineering Training Instructor, you’ll be at the heart of delivering world‑class engineering training to the Royal Navy’s Submarine Service. This is a unique opportunity to share your specialist knowledge of nuclear propulsion and marine engineering systems with the next generatio

On behalf of our client, Northern Marine Manning Services are currently looking for an Hospital Infrastructure Engineer to join our clients' hospital vessel in November 2026 for three months. STCW Certificate of Competency (COC) Chief Engineer or Second Engineer. Support annual maintenance work requ

The Hydraulic Engineer will work closely with cross-functional teams to deliver high-quality engineering solutions that meet project requirements. If you are an innovative thinker with a passion for hydraulic engineering, we encourage you to apply for this exciting opportunity. We are seeking a skil

Northern Marine Manning Services are currently looking to recruit an experienced 2nd Engineer. You must have more than18 months at sea as a 2nd Engineer on Suezmax/VLCC to be considered for the position.

AERIUS Marine UK (a subsidiary of AERIUS Marine GmbH and part of the Heinen & Hopman Group) is considered a market leader in the provision of turnkey Marine Heating Ventilation and Air Conditioning (HVAC), Chilled Water, Refrigeration and Fixed Firefighting systems. With a portfolio of customers spa

Northern Marine Manning Services seeks a Hospital Infrastructure Engineer to join a hospital vessel for a three-month assignment starting in November 2026.