Trabajos technician en CanterburyCrear alertas

Job Title: IMI MET Technician\n Location: Canterbury Salary: £22 - £24 per hour \n Job Type: Full-Time, Permanent Working Hours: Monday to Friday About the Role\n Our client is a well-established automotive business with a busy workshop in Canterbury, and they are currently looking for an experienced IMI-qualified MET Technician to join their growing team. \n This role will focus on the mechanical, electrical and ... \n \n ZIPC1_UKTJ

Location: Canterbury, East Kent, CT4 6RY Salary: £36,000 £40,000 per annum + monthly bonus Hours: Monday to Friday, 8:00am 5:30pm Weekends: No weekendsWhy Work Here? £36,000 £40,000 salary , depending on experience.Bonus paid on monthly turnover targets OTE £42K.Monday to Friday, 8:00am 5:30pm .No weekend working.Excellent reputation for quality workmanship.Dealer-level diagnostic equipment for VW Group and JLR.Bosch KTS and OPUS Autologic diagnostic systems.4-wheel alignment and ADAS equipment.Outstanding workshop facilities and equipment.Strong team ethos and supportive working environment.Extensive technical experience within the team.Training provided through Bosch Car Service.Part of the Bosch Car Service Network with a 100% audit pass .Encouragement and support for staff development.Growing customer base and increasing demand.Management team with over 35 years' experience within the prestige vehicle sector .Future development plans focused on new automotive technology.About the Business An established independent vehicle workshop based in Canterbury with an excellent reputation for high-quality servicing, diagnostics, maintenance and repairs across all makes and models.The business specialises in prestige brands including Audi, Volkswagen, Jaguar Land Rover, Mercedes-Benz and BMW , and is part of the Bosch Car Service Network .The Role An exciting opportunity is available for an experienced Vehicle Technician with a minimum of 3 years' experience to join a highly skilled and supportive workshop team.You will work on a wide range of vehicles, carrying out servicing, diagnostics, mechanical repairs and maintenance using high-quality diagnostic equipment and workshop facilities.This is an excellent opportunity for a technician who enjoys solving complex problems, takes pride in their workmanship and is keen to continue developing their skills.Key Responsibilities Carry out servicing, maintenance and mechanical repairs.Diagnose and rectify mechanical and electrical faults.Use professional diagnostic equipment to identify faults.Carry out engine repairs and timing chain work.Complete vehicle inspections and identify additional work required.Work on a range of prestige and premium vehicles.Complete repairs efficiently and to a high standard.Work independently to diagnose and resolve technical problems.Maintain a clean, organised and professional workshop environment.Communicate effectively with colleagues, management and customers.Qualifications & Profile The ideal candidate will have:Minimum 3 years' experience as a Vehicle Technician.NVQ Level 3 minimum or equivalent automotive qualification.MOT Licence preferred but not essential.MOT training can be provided for the right candidate.Strong experience in vehicle diagnostics.Familiarity with professional diagnostic equipment.Ability to work independently and solve technical problems.Strong team-working skills.Excellent communication skills.Smart and presentable appearance.Full, clean UK driving licence.Own transport.Own tools.A willingness to develop and undertake further training.Desirable Experience Experience with Jaguar Land Rover (JLR) would be highly advantageous.Additional desirable experience includes:Engine repairs and timing chains.Electrical diagnostics.Previous experience as an independent technician.Previous manufacturer/dealer training.MOT testing preferred but not essential.TPBN1_UKTJ

Operations Engineer \n Canterbury, UK \n About Edina \n Established in 1985, Edina is a leading international power generation specialist, delivering low-carbon, cost-effective energy and battery storage solutions. Using diverse fuel sources like biogas, natural gas and landfill gas, Edina supports clients in improving energy efficiency, reducing emissions, and achieving net zero goals. \n With over 200 professionals and global operations, Edina combines innovative technology, in-house manufacturing, and strong customer values, including sustainability, flexibility, and integrity, to provide reliable, tailored power solutions and exceptional after-sales support across public and industrial sectors. \n At the core of our operations is a commitment to excellence and responsibility, where safety is our top priority, and our company values guide every decision we make: \n People – Our staff are our core asset. Individually and collectively, they are critical to the success of our vision. \n Organisation – We are engaged, loyal, and accountable in achieving our goals. \n Work – Working safely is not just a policy, it’s our responsibility. \n Ethics – We embrace honesty, integrity, and respect, doing the right thing every time. \n Reputation – We strive for excellence in our processes, enabling us to achieve best-in-class industry standards. \n We are currently looking for an Operations Engineer to join our team on a full-time, permanent basis. \n The Benefits \n • Competitive salary \n - Attractive overtime rates \n - 25 days’ annual leave plus bank holidays and public holidays \n - Enhanced Holiday Entitlement based on length of service \n - Company pension scheme with an attractive employer contribution percentage \n - Company van \n - Private healthcare scheme \n - Life Insurance \n - Employee Assistance Programme \n - Cycle to Work Scheme \n - Career development opportunities \n - Continued investment in employee training to further enhance knowledge, expertise and creativity \n This is an exciting opportunity for a skilled mechanical engineer with strong knowledge of gas/diesel engines to join our leading international organisation. \n You will play a vital role in maintaining and optimising installations that help clients improve energy efficiency, reduce emissions and move towards Net Zero goals. \n What is more, you will benefit from attractive overtime rates and a strong all-round rewards package, alongside the chance to build a rewarding long-term future with a company that combines innovation with real-world impact. \n So, if you are looking for a position where your experience will make a visible difference every day, read on and apply today. \n The Role \n As an Operations Engineer, you will carry out scheduled and unscheduled maintenance work on installations across Canterbury and the surrounding area. \n Ensuring that customer satisfaction is achieved, you will efficiently diagnose and implement all reactive maintenance work on our client’s installations, as well as other users’ installations. \n You will also oversee and work to optimise the operational processes of users’ systems to increase productivity and reduce their use of excess time and materials. \n About You \n To be considered as an Operations Engineer, you will need: \n • To hold a minimum of an ONC, NVQ Level 2 or City & Guilds Level 2 qualification in a mechanical-based discipline \n - To be a competent time-served technician, preferably with a minimum of three years’ industrial mechanical experience \n - To be a competent technician with considerable skills and in-depth knowledge of engine and/or generator fundamentals \n - To have effective IT skills and competency in the use of Microsoft Office packages \n - To hold a full, valid driving licence \n Hours of Work: Monday - Friday, 8.00am - 4.30pm. \n This role will involve weekend work and possible out-of-hours work. You will be required to participate in an established 24-hour callout programme based on a rota system. \n Other companies may call this role Installation Engineer, Field Service Engineer, Engine Maintenance Technician, Mechanical Engineer, Senior Field Service Technician, or Maintenance Technician. \n The closing date for applications is 4.00pm on Thursday, 10th September 2026. \n Due to a fast-moving market, applications may be filled on short notice, and the deadline date may be brought to a close early. Please apply early to avoid disappointment. \n We are an employer committed to equal opportunities, and our company is sponsored. (This position may not meet the requirements for sponsorship). \n So, if you are ready to join us as an Operations Engineer, please apply via the button shown. This vacancy is being advertised by Webrecruit. The services advertised by Webrecruit are those of an Employment Agency.

Mobile Vehicle Technician providing servicing, maintenance and repairs via pre-booked appointments at customers home addresses or places of work. This is a new and specialist division for the number one national breakdown company in the UK, with over 15 million members.\n \n \nMust have the right to work in the UK.\n \n Location:Canterbury\n Pay / salary: £40,170 OTE: Up to £52,000\n Job type: Permanent / full-time...\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n ZIPC1_UKTJ

Field Service Engineer (Diesel / Gas Engines) \n £38,477 (OTE £50,000 +) + Overtime + Company Van + Private Healthcare + 25 Days Holiday + Life Insurance + Training + Progression + Company Benefits \n Canterbury - Kent Patch \n Are you a Field Service Engineer with a background working on diesel or gas engines looking to join a market-leading power generation specialist, where you'll receive attractive overtime rates, industry-leading training, and work on critical energy infrastructure across Kent? \n This is an opportunity to join a leading international power generation specialist established in 1985. With over 200 employees, the business designs, manufactures, installs and maintains CHP, gas engine, biogas, landfill gas and battery storage systems that help industrial and public sector clients reduce emissions and improve energy efficiency. \n In this role, you will carry out scheduled and unscheduled maintenance on gas and diesel engine installations across Kent. You'll diagnose and implement reactive maintenance, optimise operational processes, and work closely with customers to maximise productivity and minimise downtime. \n This role would suit a Field Service Engineer with experience on diesel engines, gas engines or similar equipment, looking to join a well-established business offering excellent training, overtime and long-term career progression. \n The Role: \n\n • \n Carry out planned and reactive maintenance on gas and diesel engines \n • \n Diagnose and repair mechanical and electrical faults \n • \n Optimise engine performance and operational efficiency \n • \n Complete service reports and liaise with customers \n\n The Person: \n\n • \n Level 2+ engineering qualification \n • \n Strong knowledge of gas/diesel engines \n • \n Full UK Driving Licence \n\n Reference: BBBH26873 \n Engineer, Field Service, Generator, Gas, Engines, Diesel, Biogas, Maintenance, Canterbury, Kent, Field Service, Technician, Installation Engineer, Mechanical Engineer, Electrical Engineer, Ashford, Sittingbourne, Ramsgate \n If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. \n We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications and skill set. \n Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept our T&Cs, Privacy Policy and Disclaimers.

Join Our Team as a Lead Maintenance Technician!\n Location: Manchester – City Centre, M3 \n Position: Full Time \n Salary: Up to £48,500 (DOE), Plus Overtime and Benefits About Us\n At NG Bailey Facilities Services, we pride ourselves on being a market leader in the engineering and services sector. With a rich history dating back to 1921, we are committed to innovation and excellence. Join us and be part of a dynamic team that values your growth and development! Your Role\n We are seeking a proactive Lead Maintenance Technician to oversee the maintenance of five commercial buildings, all conveniently located within a five-minute walk of each other in the heart of Manchester. If you are a qualified Electrical or Mechanical Technician with a passion for delivering exceptional service, we want to hear from you! Key Responsibilities\n\n • Lead and coordinate a team to efficiently complete planned and reactive maintenance tasks, ensuring all client issues are resolved within agreed SLAs.\n, • Support the Site Supervisor in daily contract delivery and act as their deputy during absences.\n, • Maintain up-to-date statutory documentation and logbooks for inspections and audits.\n, • Manage contractors on-site through a Permit to Work scheme.\n, • Monitor plant performance using BMS and CAFM systems.\n, • Ensure adherence to engineering standards in line with the Health and Safety at Work Act (HASAWA).\n, • Oversee incident management and emergency response procedures.\n, • Maintain accurate shift logs, technical reports, and operational documentation.\n, • Support energy efficiency and continuous improvement initiatives.\n, • Ensure quality assurance procedures are followed for all electrical and mechanical systems.\nWhat We’re Looking For\n\n, • NVQ / City & Guilds Level 3 in Electrical or Mechanical Discipline.\n, • Recognized Electrical or Mechanical apprenticeship.\n, • IOSH Working or Managing Safely certification.\n, • 18th Edition of the IEE Wiring Regulations.\n, • City & Guilds 2391 – Inspection and Testing (desirable).\n, • Legionella Awareness Responsible Person certification (desirable).\n, • Knowledge of statutory compliance in water hygiene, pressure systems, and HVAC.\n, • Experience with building services PPM schedules and SFG20.\n, • Competent in Electrical and Mechanical Systems, Building Management Systems, and more.\n, • A client-facing commercial FM background.\nWhy Join Us?\n We believe in rewarding our team members with a comprehensive benefits package: \n\n • Competitive salary up to £48,500, plus overtime.\n, • 25 days of holiday plus public holidays.\n, • Pension plan with a leading provider and employer contributions.\n, • Sick pay and personal wellbeing days.\n, • Private medical insurance.\n, • Access to a 24/7 Employee Assistance Program for mental health support.\n, • Flexible benefits including dental insurance, gym memberships, and more.\n, • Personal development programs to help you grow.\nNext Steps\n We are committed to building a culture of inclusion and respect. If you require any accommodations during the application or interview process, please let us know, and we will work with you to meet your needs. \n Ready to take the next step in your career? Join us at NG Bailey Facilities Services and be part of something great!

We have a fabulous opportunity for a qualified and highly skilled Vehicle Technician/mechanic to join our friendly team.Our skilled vehicle technicians / mechanics are the backbone of our business and are required to diagnose, repair and service our customers vehicles. We are always looking for great vehicle technicians to contribute to the success of our business by carrying out servicing or repairs in a timely fashion in order to get the vehicle back on the road as quickly as possible. If you are a fully qualified (or time served) vehicle technician and ideally hold a current driving licence (so that you can carry out vehicle road testing) then please send us your CV.We offer a competitive salary with an outstanding bonus scheme, ongoing training and the opportunity to progress within the company for the right candidate.Current Vehicle Technician quotes :1. "Such a good bonus scheme, the BEST I have had from anywhere I have worked. It is more realistic here as it goes on your own productivity and not anyone else's" . Mechanic, Mr Clutch Autocentres, employed over 6 years.2. "Most places you have to hit a centre bonus, but here you can hit a bonus no matter what, as long as you are productive, it is achieveable. I know I am going to get my bonus because of what I do, not anyone else!" Mr Clutch Autocentres Mechanic, employed over 8 years.About UsMr Clutch is a national Autocentre network and is recognised as the leading clutch, brake, service, cambelt and MOT provider, with over 40 Autocentres throughout the UK.As an established, nationwide, family owned business we value and appreciate our greatest asset, our staff.About the JobAs a skilled vehicle technician/mechanic you will be responsible for repairing and servicing motor vehicles of all types in accordance with Company standards in a safe and efficient manner. Similarly, you will test and diagnose faults, providing written reports on component defects and/or systems with impending failure.Purpose of JobYou will be required to carry out repairs and servicing to the highest standards and to the appropriate specificationYou will be required to test and diagnose faultsYou will be required to examine vehicles, recognise and provide a written report on vehicle (or component) defects or systems of impending failureYou will be required to ensure all work is carried out observing safe working practices of self and othersYou will be required to act as a brand ambassadorHours: 48 (8.30-5.30 Mon to Fri & 8.30-5 Sat)About YouOnly vehicle technicians / mechanics with appropriate hands on experience and qualifications in the motor industry should apply. In return, we offer excellent earning potential, a good bonus scheme and working practices.Own tools required but a starter tool-kit can be providedBenefits/ Why Work for Us?We are committed to the development and career progression of all personnel and offer exceptional in-house training, along with an excellent bonus system that rewards both productivity and efficiency.Up to 44 days paid leave (including bank holidays)Excellent bonus schemePersonal developmentCareer progression opportunitiesTraining at our academies in Strood/ReadingUniformCompany discountPension schemeStrictly No AgenciesTPBN1_UKTJ

Job Description LGV FitterPlymptonPermanent, full-timeCompetitive salary + Company Van + BenefitsAs a Vehicle Technician, you will be responsible for servicing, maintaining and repairing a range of commercial vehicles, ensuring they remain safe, compliant and operational at all times. You will use modern diagnostic equipment to identify faults, carry out repairs efficiently, and maintain accurate records of all work completed. You will work on a fleet comprised of:Light Commercial Vehicles,Peugeot Boxers andFord Transit Vans.More about the role:Carry out routine servicing, maintenance and repairs on commercial vehicles.Diagnose mechanical and electrical faults using diagnostic equipment, including Texa and Bosch systems.Conduct vehicle inspections and identify repair requirements.Complete all work in line with manufacturer guidelines and company standards.Maintain accurate service records, inspection reports and job documentation.Ensure vehicles meet all safety and compliance requirements.Support workshop efficiency by working independently and collaboratively with colleagues.Qualifications About you:? NVQ Level 3 in Vehicle Maintenance and Repair or equivalent? Full UK Driving Licence? Minimum of 5 years' experience in a similar Vehicle Technician role? Experience servicing and repairing light commercial vehicles? Strong diagnostic and fault-finding experience using Texa and/or Bosch systems? Experience working with Ford and Peugeot vehicles? Competent IT skills? Confident using tablets, mobile devices and computer systems to complete job cards, service records, inspection reports and workshop paperwork accurately? Strong attention to detail and commitment to delivering high-quality workmanshipAdditional Information What we can offer you:Enhanced maternity,paternity and adoption pay and leaveCompany pensionLife assurance scheme (x4 salary)Medicare Cash Plan (includes cash payments towards dental, medical, therapeutic treatments) with the option to add up to 4 dependantsRefer a friend schemeEmployee assistance programme (access to GP appointments and mental health support)Competitive annual leave plus bank holidaysTraining and career progression opportunitiesCompany vanAdler and Allan are committed to fostering diversity and inclusion in our workplace. We proudly embrace equal opportunities for all applicants, regardless of race, colour, religion, sex, sexual orientation, gender identity or national origin.If you require any support with your application, whatever the circumstance, please let us know.TPBN1_UKTJ

Experienced and ready to develop your fast-fit career? Were hiring Vehicle Techs right now in our Centres. Come and work for an employer that really values your skills and will give you the rewards you deserve in great pay and benefits. Whether youre a brakes specialist or wizard auto service technician, if you can get stuck in and send every customer away happy and safe on the road, theres a long way you can go at Tyre Pros. Well help you every step of the way.The Day to DayYour daily life as a Vehicle Tech at Tyre Pros will depend on your specialism. If fixing brakes is your thing, you can join as an Autocare Technician. If youre more into servicing, then a Service Technician role might be for you. Either way, as well your specialist area, youll also get involved with the daily business of fitting tyres so that our customers can drive away with complete confidence. Its a team effort here, and your expertise will make you one of our key players.Who we're looking forWe want to meet Vehicle Techs who are full of energy and understand the importance of the work they do. Keeping customers safe on the road is serious business, and its our number one priority in Centres. If youre on board with that and can pitch in with your teammates in delivering it, youll go far. Be there for customers and colleagues and well help you build a career for life.The PerksWeve invested in an amazing benefits package for our team members. It includes: Discount at supermarkets and high street retailers Up to 50% off at Tyre Pros and Kwik Fit Wagestreamaccess your wages before payday Eyecarefree examinations and discounted/free glasses Easy-book appointments with a free online GP Cycle-to-work scheme Free mortgage advice Life assurance Employee Assistance Programme Full-pay paternity leave.About usTyre Pros is a tyre and car servicing retailer set up by one of the UKs largest tyre wholesalers, Stapletons. That means were extremely well placed to deliver some of the best service in our industryand weve got three Pirelli Performance Centre of the Year awards to prove we do just that. The quality of our service keeps customers safe on the road, and weve got careers to match. Thats why its always worth talking to the Tyre Pros.TPBN1_UKTJ

Carry out services, repairs and maintenance on customer vehicles. Level 3 NVQ Vehicle Maintenance qualification or equivalent. Level 2 NVQ Vehicle Maintenance level Technicians with experience will be considered.

The role offers a varied workload, working across a range of light commercial vehicles and fleet operations.

Are you an experienced Vehicle Technician seeking a new opportunity within a prestigious main dealer? Our client, a renowned dealership in Canterbury, Kent, is actively recruiting for a qualified Vehicle Technician to join their professional workshop team. Manufacturer accredited training, including

Mobile Vehicle Technician - Wembley. We are currently looking for a Mobile Vehicle Technician to service a customer with a large fleet of cars and vans.

Mobile Vehicle Technician - Milton Keynes. We are currently looking for a Mobile Vehicle Technician to service a customer with a large fleet of cars and vans.

GEV Wind Power is seeking experienced Blade Repair Technicians to support internal blade inspections and composite repair projects on SGRE wind turbines at onshore wind farms throughout the United States. This role requires extensive travel and offers the opportunity to work on a variety of projects while maintaining the highest standards of safety, quality, and workmanship. Location: 100% travel throughout the USA Job Type: Contract Job Responsibilities: Travel 100% on a rotational basis to wind farms throughout the U.S. - cross country travel by air or truck Perform composite blade repair up-tower via platforms, rope access and/or occasionally on the ground Epoxy and Polyester resin wet layup Vacuum infusion Balsa and foam sandwich materials Structural repair Completing detailed Daily Progress Reporting Documents and QAQC reports Completing onsite stock checks Assisting site lead and project coordinator as applicable We are looking for strong, reliable technicians with the following skillset and training: 2+ years of Composite repair experience Platform and/or rope access experience Knowledge of fiberglass reinforcement and structural repair methods. Ability to safely and properly use powered hand tools. Good finger dexterity, including precise use of hand and power tools Understanding of repair specifications Ability to read and interpret complex technical drawings and processes. IT literate, including email, internet, and iPad usage. Ability to work well in a team, take guidance, and provide leadership when required. Flexibility to adapt to changes in scope and work assignments. Physically capable of meeting strenuous job requirements, including climbing ladders and scaffolding, bending, crawling, stooping, and lifting up to 75 pounds. Ability to wear a respirator and work safely with protective equipment Good vision (with corrective lenses if necessary) to perform detailed inspections, read instructions, and safely operate equipment. Valid driver’s license, good MVR report, and must be 21 years of age or older to drive a company vehicle. Must successfully pass a criminal background check and maintain a drug-free status. To be considered for this role, candidates will need the following certifications: GWO BST (Basic Safety Training) – fire awareness, working at heights, manual handling, first aid GWO ART (Advanced Rescue Training Hub/Nacelle) GWO Slinger Signaller or Siemens Rigging Safety GWO Blade Repair or Advanced Blade Repair from any of the approved providers: AmuSyd, Team 1, Blade Repair Academy or Green SGBTCF Blade Technician Profile Spot Paint certification OSHA 10 General Industry (preferred; assistance available to obtain certification) EHS Regional Compliance (preferred; assistance available to obtain certification) Rigging Safety SGRE Blade C or Blade D certification (preferred but not required) What are the perks of working with GEV Wind Power? Upskilling trusted GEV technicians via GEV Academy Bespoke reporting system (time saving with training provided) Streamlined communications for our technicians with regular Business and Project updates via GEV technician engagement platform We listen to our technicians needs and value their feedback (consistent technician feedback surveys) Ongoing work for our top talent A little bit about us: A Career Enabling You to Make a Global Impact! You will have heard about the term ‘energy transition’ and perhaps wondered what this means and even how you can get involved. We can see fundamental changes in our daily lives from the electrification of motor vehicles to reducing our dependency on fossil fuels through the increased use of renewable energy sources. At GEV Wind Power, we are a key part of this transition and proud to be helping in a small way to accelerate the change. Our role is critical in supporting power generation from wind energy, where we are the market leader for maintaining one of the key components, the rotor blades. If the blades become damaged or simply lose their structural integrity through erosion from wind and rain, their efficiency and ability to produce power reduces dramatically. Our job is to ensure the blades keep their profile and are optimum for producing electricity. Your application has been successfully submitted! _ We appreciate your interest in this position. Unfortunately, you have already applied for this job.

Mobile Vehicle Technician - Swindon.HiQ is owned by Goodyear a well-known and respected Tyre brand in the automotive industry.Over the coming years we have plans to continuously grow the network and increase our retail stores and Mobile offering, meaning career progression, job security and a brand

Mobile Vehicle Technician - High Wycombe. We are currently looking for a Mobile Vehicle Technician to service a customer with a large fleet of cars and vans.

Join our dynamic and multidisciplinary Water team as a Senior CAD Technician in our rapidly growing Belfast office - whilst also taking advantage of our hybrid working set up. Lead the production of civil & structural engineering drawings using Civil 3D Revit & AutoCAD. Experience and confident usin

Are you an experienced Vehicle Technician seeking a new opportunity within a prestigious main dealer? Our client, a renowned dealership in Canterbury, Kent, is actively recruiting for a qualified Vehicle Technician to join their professional workshop team.This permanent role offers excellent prospec

VEHICLE TECHNICIAN Location: Canterbury Salary: Up to £37,000 Basic Salary | OTE Up to £45,000 Job Type: Full-Time, Permanent Looking for a role where your technical skills are recognised, your earning potential is rewarded, and your career can continue to progress? If you&#

Level 2 NVQ Vehicle Maintenance level Technicians with experience will be considered. Experience as a Vehicle Technician in a main franchised workshop or independent.

This is a fantastic opportunity for a qualified MET Technician looking for.

Dealer-level diagnostic equipment for VW Group and JLR. Bosch KTS and OPUS Autologic diagnostic systems.

We are pleased to offer a career-defining opportunity for a skilled automotive professional to join our client’s reputable dealership in Canterbury as a Vehicle Technician.This is a role tailored for experienced motor trade individuals seeking a forward-thinking environment with clear paths for ca

Are you a hands-on Maintenance Technician with strong mechanical skills, with some electrical knowledge, and experience within a manufacturing environment? Our client is seeking a proactive and solutions-focused engineer to support the reliability, performance, and continuous improvement of a busy p

Job Description Job Title: IMI MET Technician Salary: £22 - £24 per hour Job Type: Full-Time, Permanent Working Hours: Monday to Friday Our client is a well-established automotive business with a busy workshop in Canterbury, and they are currently looking for an experienced IMI-qualified MET Technician to join their growing team. This role will focus on the mechanical, electrical and ...

NVQ Level 3 minimum or equivalent automotive qualification. MOT Licence preferred but not essential. MOT training can be provided for the right candidate.

Job Description Job Title: IMI MET Technician Salary: £22 - £24 per hour Job Type: Full-Time, Permanent Working Hours: Monday to Friday Our client is a well-established automotive business with a busy workshop in Canterbury, and they are currently looking for an experienced IMI-qualified

About the Business An established independent vehicle workshop based in Canterbury with an excellent reputation for high-quality servicing, diagnostics, maintenance and repairs across all makes and models. The Role An exciting opportunity is available for an experienced Vehicle Technician with a min

This role will focus on the mechanical, electrical and.

Job Description Job Title: IMI MET Technician Salary: £22 - £24 per hour Job Type: Full-Time, Permanent Working Hours: Monday to Friday Our client is a well-established automotive business with a busy workshop in Canterbury, and they are currently looking for an experienced IMI-qualified

Job Description Job Title: IMI MET Technician Salary: £22 - £24 per hour Job Type: Full-Time, Permanent Working Hours: Monday to Friday Our client is a well-established automotive business with a busy workshop in Canterbury, and they are currently looking for an experienced IMI-qualified MET Technician to join their growing team. This role will focus on the mechanical, electrical and ...

Future development plans focused on new automotive technology. NVQ Level 3 minimum or equivalent automotive qualification. MOT Licence preferred but not essential.

Working as part of the Forensic Science and Chemistry technical team as Associate Technician, you will help provide a technical support service for staff and students within the School.

NVQ Level 3 minimum or equivalent automotive qualification. MOT Licence preferred but not essential. MOT training can be provided for the right candidate.

Future development plans focused on new automotive technology. NVQ Level 3 minimum or equivalent automotive qualification. MOT Licence preferred but not essential.

Future development plans focused on new automotive technology. NVQ Level 3 minimum or equivalent automotive qualification. MOT Licence preferred but not essential.

About the Business An established independent vehicle workshop based in Canterbury with an excellent reputation for high-quality servicing, diagnostics, maintenance and repairs across all makes and models. The Role An exciting opportunity is available for an experienced Vehicle Technician with a min

This role will focus on the mechanical, electrical and.

Job Description Job Title: IMI MET Technician Salary: £22 - £24 per hour Job Type: Full-Time, Permanent Working Hours: Monday to Friday Our client is a well-established automotive business with a busy workshop in Canterbury, and they are currently looking for an experienced IMI-qualified MET Techn

Our client is a well-established automotive business with a busy workshop in Canterbury, and they are currently looking for an experienced IMI-qualified MET Technician to join their growing team.

As a Roadside Technician at RAC, you'll get benefits that go the extra mile:- Strong base pay – £36,400 and realistic OTE of £61,000, with top-performers earning significantly more through bonuses and enhanced overtime rates- Share in our success – Join our colleague share scheme for free to b

Vehicle technician role at a new Halfords Garage Services Fusion centre, focusing on first-class customer experience.

Seeking an IT Technician in Canterbury, Kent to provide IT support and maintain infrastructure in schools. Responsibilities include equipment setup, server administration, cloud services management, and user support.

Electrical Maintenance Technician opportunity with a leading manufacturing business. Join a skilled engineering team carrying out fault finding, PPMs, mechanical repairs, hydraulics, pneumatics, machinery improvements and installation projects. Excellent long-term career prospects. Electrical Maintenance Technician Whitstable Excellent package including shift allowance Permanent role Hours - Rotating shift pattern of: Week 1: 6.00am – 2.00pm Monday – Friday. Week 2: 2.00pm – 10.30pm Monday – Thursday and 2.00pm – 7.30pm Friday. Are you a hands-on Maintenance Technician with strong electrical skills, with some mechanical knowledge, and experience within a manufacturing environment? Our client is seeking a proactive and solutions-focused engineer to support the reliability, performance, and continuous improvement of a busy production facility. The Role As a key member of the maintenance team, you will play an important role in ensuring equipment availability, reducing downtime, and supporting ongoing site improvement projects. This position offers a varied workload across production machinery, facilities maintenance, and capital improvement activities. Key Responsibilities • Diagnose electrical faults and carry out repairs to production equipment., • Complete planned preventative maintenance activities and condition-based monitoring., • Support reactive maintenance and breakdown response activities., • Work with hydraulic, pneumatic and automated machinery systems., • Assist with equipment installations, upgrades and site improvement projects., • Interpret mechanical drawings, schematics and technical documentation., • Utilise the CMMS system to manage maintenance activities and records., • Coordinate remedial actions identified through inspections and maintenance activities., • Support facilities maintenance across buildings and site services., • Liaise with contractors and assist with permits, RAMS reviews and safe systems of work., • Source components and support purchasing requirements., • Contribute to continuous improvement initiatives that enhance operational efficiency. Requirements Essential • NVQ Level 3 in an Engineering discipline or equivalent., • GCSE Maths and English Grade 5 or equivalent., • Additional qualifications such as 18th Edition Wiring Regulations., • Previous experience in a maintenance engineering role within manufacturing., • Strong mechanical fault-finding and problem-solving skills., • Experience working with hydraulics, pneumatics and industrial machinery., • Ability to interpret engineering drawings and technical documentation., • Good IT skills and experience maintaining accurate records. Desirable • Engineering apprenticeship., • IOSH Working Safely or similar safety qualification., • Knowledge of CNC machinery, injection moulding, automation or plating processes. Why Join Our Client? • Varied and technically challenging role., • Opportunity to work on improvement and installation projects., • Supportive engineering environment., • Long-term career development opportunities., • Stable and growing manufacturing business. Morgan Jones is committed to creating a diverse and inclusive environment and is proud to be an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, colour, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. About Morgan Jones: Morgan Jones Limited acts as an employment agency. By applying, you accept the Terms & Conditions as well as the Privacy, Cookie, and Data Retention Policy, which can be found on our website. Due to the high volume of applicants, we see that if you have not heard back from us within 72 hours, please assume that you have been unsuccessful on this occasion. To view other great opportunities, visit our website or follow Morgan Jones on your favourite social networks – Facebook, Instagram, Twitter, or LinkedIn

We are pleased to offer a career-defining opportunity for a skilled automotive professional to join our client’s reputable dealership in Canterbury as a Vehicle Technician. This is a role tailored for experienced motor trade individuals seeking a forward-thinking environment with clear paths for career progression. The Vehicle Technician role provides extensive exposure to diverse vehicle brands, modern facilities, and ongoing manufacturer training. Benefits: Competitive basic salary of £38,000 per annum, complemented by a bonus scheme with potential earnings of approximately £450/month. Ongoing manufacturer training and professional development programmes. Modern, well-equipped workshop with access to the latest technology and diagnostic tools. Opportunity to work on a variety of vehicle brands, enhancing technical versatility. Expansion plans within the business, offering future progression opportunities. Monday to Friday working hours, 08:30 – 17:00, with an inclusion of 1 in 2 Saturday mornings, 08:30 – 12:30.Duties of a Vehicle Technician: Performing routine vehicle servicing and scheduled maintenance on Stellantis vehicles. Conducting diagnostic procedures and warranty repairs according to manufacturer guidelines. Preparing both new and used cars to high-quality standards. Maintaining clear and professional communication with Service Advisors and Workshop Team Leaders. Processing Vehicle Health Check information and liaising effectively with customers. Contributing to a team dedicated to delivering high standards of customer service and satisfaction.Requirements of a Vehicle Technician: Certified qualification in motor vehicle repair and maintenance. Strong diagnostic skills with the ability to interpret technical data accurately. Proven commitment to delivering excellent customer care. Good organisational skills and a professional attitude. Full UK driving licence. Previous dealership experience is advantageous; MOT qualification is desirable.This Vehicle Technician role in Canterbury is ideal for technicians looking to enhance their career within a supportive and expanding dealership. The Vehicle Technician position offers variety, ongoing training, and considerable room for development. Contact Rhys Woods, Automotive Recruitment Specialist at Perfect Placement covering Canterbury and Kent, today to discover more about this fantastic opportunity. Perfect Placement are the UK’s Leading Automotive Recruitment Agency so if you are looking for a Job get in touch today

Operations Engineer Canterbury, UK About Edina Established in 1985, Edina is a leading international power generation specialist, delivering low-carbon, cost-effective energy and battery storage solutions. Using diverse fuel sources like biogas, natural gas and landfill gas, Edina supports clients in improving energy efficiency, reducing emissions, and achieving net zero goals. With over 200 professionals and global operations, Edina combines innovative technology, in-house manufacturing, and strong customer values, including sustainability, flexibility, and integrity, to provide reliable, tailored power solutions and exceptional after-sales support across public and industrial sectors. At the core of our operations is a commitment to excellence and responsibility, where safety is our top priority, and our company values guide every decision we make: People – Our staff are our core asset. Individually and collectively, they are critical to the success of our vision. Organisation – We are engaged, loyal, and accountable in achieving our goals. Work – Working safely is not just a policy, it’s our responsibility. Ethics – We embrace honesty, integrity, and respect, doing the right thing every time. Reputation – We strive for excellence in our processes, enabling us to achieve best-in-class industry standards. We are currently looking for an Operations Engineer to join our team on a full-time, permanent basis. The Benefits • Competitive salary - Attractive overtime rates - 25 days’ annual leave plus bank holidays and public holidays - Enhanced Holiday Entitlement based on length of service - Company pension scheme with an attractive employer contribution percentage - Company van - Private healthcare scheme - Life Insurance - Employee Assistance Programme - Cycle to Work Scheme - Career development opportunities - Continued investment in employee training to further enhance knowledge, expertise and creativity This is an exciting opportunity for a skilled mechanical engineer with strong knowledge of gas/diesel engines to join our leading international organisation. You will play a vital role in maintaining and optimising installations that help clients improve energy efficiency, reduce emissions and move towards Net Zero goals. What is more, you will benefit from attractive overtime rates and a strong all-round rewards package, alongside the chance to build a rewarding long-term future with a company that combines innovation with real-world impact. So, if you are looking for a position where your experience will make a visible difference every day, read on and apply today. The Role As an Operations Engineer, you will carry out scheduled and unscheduled maintenance work on installations across Canterbury and the surrounding area. Ensuring that customer satisfaction is achieved, you will efficiently diagnose and implement all reactive maintenance work on our client’s installations, as well as other users’ installations. You will also oversee and work to optimise the operational processes of users’ systems to increase productivity and reduce their use of excess time and materials. About You To be considered as an Operations Engineer, you will need: • To hold a minimum of an ONC, NVQ Level 2 or City & Guilds Level 2 qualification in a mechanical-based discipline - To be a competent time-served technician, preferably with a minimum of three years’ industrial mechanical experience - To be a competent technician with considerable skills and in-depth knowledge of engine and/or generator fundamentals - To have effective IT skills and competency in the use of Microsoft Office packages - To hold a full, valid driving licence Hours of Work: Monday - Friday, 8.00am - 4.30pm. This role will involve weekend work and possible out-of-hours work. You will be required to participate in an established 24-hour callout programme based on a rota system. Other companies may call this role Installation Engineer, Field Service Engineer, Engine Maintenance Technician, Mechanical Engineer, Senior Field Service Technician, or Maintenance Technician. The closing date for applications is 4.00pm on Thursday, 10th September 2026. Due to a fast-moving market, applications may be filled on short notice, and the deadline date may be brought to a close early. Please apply early to avoid disappointment. We are an employer committed to equal opportunities, and our company is sponsored. (This position may not meet the requirements for sponsorship). So, if you are ready to join us as an Operations Engineer, please apply via the button shown. This vacancy is being advertised by Webrecruit. The services advertised by Webrecruit are those of an Employment Agency

We are seeking a Multi Skilled Maintenance Engineer (electrical or mechanical bias) to work for a successful multinational manufacturing company in Whitstable. This is a day shift role working Monday to Friday. The rotation shift pattern - Shift A; Mon-Fri 6am-2pm; Shift B; Mon-Thu 2pm-10.30pm & Fri 2pm-7.30pm. Duties and responsibilities • Diagnose the failure and causes of asset/component breakdowns, repair or fit new parts and make sure the equipment is working correctly. • Complete PPM tasks including Condition Based Monitoring. Identify remedial works and coordinate the resolutions in a timely manner. • Utilise the CMMS system to prioritise works, lead discussions within the departmental morning meeting, balance resolving long term actions along with the short-term urgent actions. • Maintain and store maintenance tools and equipment to the standard required. • Provide a timely breakdown response to emergencies, unplanned problems, and repairs. • Work with specialist equipment such as programmable logic controllers (PLC), hydraulic and pneumatic systems, which control machinery in the machine shop, assembly and plating shop area. • Installation of electrical and / or mechanical plant and equipment i.e. Control panels, fixed electrical installations & testing, • Support with facilities maintenance i.e. Buildings, roadways, water systems (plant & operations), communication systems. • Interpreting electrical / mechanical drawings, schematics, and operating instructions to support the planned maintenance schedules. Person Specification • Must be able to interpret electrical wiring/hydraulic/pneumatic diagrams • Proven demonstratable experience in a similar role. • Knowledge of various engineering disciplines including but not limited to electrical/electronic systems, fluid dynamics such as hydraulics, pneumatics or water processes. Key words: maintenance engineer maintenance technician maintenance manager engineering technician engineering manager engineering supervisor electrical engineer electrical engineering mechanical engineer mechanical engineering workshop engineer workshop technician multi skilled engineer multi skilled maintenance engineer