Air methods jobs in Camden, New JerseyCreate job alerts

Career Fair! Come join us for in-person interviews, job offers will be given out on the spot! See below for details. \n Friday March 13th, 2026 \n 10:30 a.m. — 1:00 p.m. \n Philadelphia Navy Yard \n S. 19th & Kitty Hawk Ave Philadelphia, PA 19112 \n Follow Signs for Entrance \n What to bring: \n Valid form of I.D \n Multiple Resume \n \n Job Description \n The Environmental Engineer in the OSHE (Occupational Safety, Health and Environment) Office Branch is responsible for providing technical support to the Pollution Prevention Process Engineering Branch on all environmental matters including, but not limited to, air quality, water, wastewater, solid waste, hazardous waste, and hazardous materials. The incumbent is a technical consultant to analyze environmental discharges, emissions and waste streams in support of the reduction or prevention of pollution at the source through cost-effective changes in production, operation, and raw material use. \n Responsibilities include but are not limited to: \n Investigation, planning, scheduling, managing, executing, reporting, accomplishment and technical direction of broad and difficult environmental engineering studies and projects with a minimum of technical and supervisory direction. \n Prepares documentation (reports, procedures, technical specifications). \n Serve as Project engineer (develops, designs, justifies and implements projects) to acquire new systems, equipment, facilities, devices, methods or modify existing equipment, etc. to prevent pollution during operations. This includes coordinating efforts with other departments as well as contractors (reviews, evaluates and recommends changes in designs, projects, etc.). \n Acts as troubleshooter in identification and resolution of problems encountered during installation/testing of new equipment, foundry equipment and other environmental systems used in the facility (checkout, troubleshooting, development of detailed designs and plans for remedial action and monitoring repair efforts to ensure proper accomplishment and compliance with environmental regulations). \n Shall comply with all NFPC procedures for safety, fall protection and hazardous materials. \n Qualifications Required for the Position \n\n • Bachelor of Science Degree in Engineering. Area of expertise should reside in Environmental, Mechanical, Manufacturing or equivalent.\n, • Experience with air emissions.\n, • Wide range of mechanical engineering theories, concepts, principles, standards and methods sufficient to formulate, execute, advise on, and explain recommendations or solutions to modify standard practices, equipment, devices, processes, and techniques.\n, • Reviews material substitution and new material requests to determine the effect of any release to the environment, industrial wastewater treatment plant or the sanitary sewer system, as well as its pollution prevention potential.\n

Job Description At JEVS, we help the people we serve lead self-determined, connected, and hopeful lives that strengthen themselves, their families, and their communities. Our team is more than 1,000 strong, serving the Greater Philadelphia community tirelessly for over 80 years. Our programs are designed to help individuals have a better quality of life. We serve those with disabilities and people facing tough socio-economic conditions. We believe everyone deserves fulfilling jobs, educational opportunities, and access to vital services. JEVS Human Services has an exciting opportunity to join the team at our Orleans Technical College as a Refrigeration Instructor. The Instructor will be responsible for teaching students through hands-on projects and theory in safety, math, and other basics of air conditioning refrigeration and heating. Responsibilities: * Provide instruction, as specified in the curriculum, in the basics of air conditioning refrigeration and heating * Supervise students in hands-on trades tasks * Provide testing of students’ knowledge of theory * Prepare curricula materials * Utilize varying delivery methods and media to keep students engaged with the lesson for the full class day. * Maintain student attendance and grade rosters This position is part-time, 2 evenings per week, 5:30pm-10:15pm. Part-time instructor pay rate is $32.50. Qualifications: • 3+ years experience diagnosing, maintaining, and repairing residential and commercial systems; experience working with heat pumps, gas and oil-fired furnaces, ductwork, radiant heat, etc., • Must have EPA certification, • Knowledge of electrical theory and heating theory is a must At JEVS, we are committed to ensuring all our employees feel included, valued, appreciated and free to be who they are at work. We cultivate a culture where differences are valued, and we are putting resources and attention towards improving employee engagement, retention, and promotion of our talented staff. Diversity, inclusion, and equity are core principles that guide how we cultivate leaders, build our teams, and create an environment that is the right fit for JEVS Human Services’ employees, our community partners, and the individuals we serve. For more information about what it’s like to be a part of the JEVS team, visit our careers page at Qualified individuals with disabilities are encouraged to apply; reasonable accommodations will be provided. Please contact your recruiter if you are in need of an accommodation during the interview process. JEVS Human Services is committed to ensuring equal employment opportunities. The Agency will not engage in or tolerate unlawful discrimination (including any form of unlawful harassment) on account of a person’s gender, gender identity, age, race, color, religion, creed, sexual preference or orientation, marital status, national origin, ancestry, citizenship, military status, veteran status, disability, or membership in any other protected group. Qualified individuals with disabilities are encouraged to apply; reasonable accommodations will be provided.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Senior Specialist, Manufacturing Engineer Job Code: 36675 Job Location: Camden, NJ Schedule: 9/80 Job Description: This position is responsible for designing and developing manufacturing methods, processes, procedures, operational sequences and production layouts for the manufacture and testing of power switchboards, circuit breakers and power converters for the NAVY. The ideal candidate is well versed in modern manufacturing methods and techniques, and can implement efficient and rigorous process improvements with attention to applicable specifications and constraints. Essential Functions: \n • Recommends and implements equipment and process modifications to improve production efficiencies, manufacturing techniques and production yields for existing products. \n, • Estimates manufacturing costs, evaluates labor standards and makes recommendations for tooling and process requirements of new or existing product lines. \n, • Creates and maintains manufacturing documentation including but not limited to: work instructions, production routings, flow charts, time and motion studies, capacity and utilization studies, cycle time analysis, and line balancing. \n, • Adapts machine or equipment design as necessary to support production, safety, and ergonomic needs. \n\n Qualifications: \n • Bachelor of Science degree in Mechanical, Industrial, or related Engineering with minimum 6 years of prior related experience, or a graduate degree with minimum 4 years of prior relevant experience. In lieu of an engineering degree, minimum of 10 years of prior related experience. \n, • Experience with standard ERP, MRP and MES software. \n, • Experience in military or industry specifications and standards pertaining to design, testing, hardware, material, and processes. \n, • Advanced experience with Microsoft Office (Excel, Word, Powerpoint, PowerBI, Access). \n\n Preferred Qualifications: \n • Experience working with Power Switchboard or similar low/medium voltage/high-power type equipment. \n, • Experience with CAD software such SolidWorks. \n, • Skilled in design, prototyping and development of customized tooling. \n, • Trained or certified in motion time systems such as MTM and MOST. \n, • Ability to obtain and maintain a secret security clearance \n\n In compliance with pay transparency requirements, the salary range for this role is $84,500 - $157,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including relocation stipend, 401(k), EAP, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .

Job Description JEVS Human Services has an exciting opportunity to join the team at our Orleans Technical College as a HVAC Instructor. The Instructor will be responsible for teaching students through hands-on projects and theory in safety, math, and other basics of air conditioning refrigeration and heating. Responsibilities: * Provide instruction, as specified in the curriculum, in the basics of air conditioning refrigeration and heating * Supervise students in hands-on trades tasks * Provide testing of students’ knowledge of theory * Prepare curricula materials * Utilize varying delivery methods and media to keep students engaged with the lesson for the full class day. * Maintain student attendance and grade rosters This position is part-time, 2 evenings per week, 5:30pm-10:15pm. Part-time instructor pay rate is $32.50. Qualifications: • 3+ years experience diagnosing, maintaining, and repairing residential and commercial systems; experience working with heat pumps, gas and oil-fired furnaces, ductwork, radiant heat, etc., • Must have EPA certification, • Knowledge of electrical theory and heating theory is a must At JEVS, we are committed to ensuring all our employees feel included, valued, appreciated and free to be who they are at work. We cultivate a culture where differences are valued, and we are putting resources and attention towards improving employee engagement, retention, and promotion of our talented staff. Diversity, inclusion, and equity are core principles that guide how we cultivate leaders, build our teams, and create an environment that is the right fit for JEVS Human Services’ employees, our community partners, and the individuals we serve. For more information about what it’s like to be a part of the JEVS team, visit our careers page at Qualified individuals with disabilities are encouraged to apply; reasonable accommodations will be provided. Please contact your recruiter if you are in need of an accommodation during the interview process. JEVS Human Services is committed to ensuring equal employment opportunities. The Agency will not engage in or tolerate unlawful discrimination (including any form of unlawful harassment) on account of a person’s gender, gender identity, age, race, color, religion, creed, sexual preference or orientation, marital status, national origin, ancestry, citizenship, military status, veteran status, disability, or membership in any other protected group. Qualified individuals with disabilities are encouraged to apply; reasonable accommodations will be provided.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Packaging Designer Job Code: 37269 Job Location: Onsite Schedule: 9/80 Job Description: The Packaging Designer shall design packages for electronic parts and equipment that provides adequate protection during internal handling, storage and shipping. The designs must meet government and commercial standards for packaging and documentation. The successful candidate will use Pro Engineer and/or Creo to design and document all methods and produce the required documentation. The Packaging Designer will communicate designs verbally and in writing and will interface and support multiple organizations (Engineering, Purchasing, QA and Manufacturing) during the packing design process. Combine art, business and engineering into package design while considering the function, aesthetics, production costs and usability of shipping and transportation packaging design. Preferred Knowledge: \n • Adobe Creative Suite (InDesign, Photoshop, Illustrator, Acrobat Pro, etc.) \n, • Microsoft Office (Word, PowerPoint, Publisher, Excel, etc.) \n, • Email Marketing Virtual Meetings (Zoom, MS Teams) \n, • Determines requirements and designs packing for parts and equipment to provide adequate protection during internal handling, storage, and shipping. \n, • Reviews design of product to determine type of packing required, considering such factors as quantities involved, economy of packing and freight classification. \n, • Investigates possibility of using packing materials as part of the manufacturing or internal handling, adapting packing designs accordingly. \n, • Consults with product Engineering Sections to exchange design information. \n, • Investigates new packing materials and methods. \n, • Sketches design for sample. \n, • Obtains parts and makes up or arranges for construction of sample package. \n, • Participates in performing tests such as drop test to simulate shipping conditions. \n, • Determines requirements of container and packing aids such as liners, padding, braces, and other protective agents and lists packing requirements. \n, • Prepares and submits specifications or sketches of cartons, boxes and packing agents to drafting to have standard drawings made. \n, • Arranges for procurement of sample packing items through contact with packing vendors when required and checks samples for adherence to specifications. \n, • Checks packing drawings. \n, • Determines quantity and prepares list of packing material required for each unit. \n, • Assures adequacy of design for intended use such as production, handling, packing, and shipping, by discussing problems with personnel concerned. \n, • Participates in establishment of packing design standards. \n, • Supports manufacturing section by guiding the actual packing operation through assembly and inspection. \n, • Operates interactive computer graphic systems as required. \n\n Qualifications: \n • College degree in Graphic Design (preferred), fine arts, design and visual communication or any technical discipline from a fully accredited college or university. \n, • Practical use and knowledge ofMicrosoft Office Suite. Work independently with little direction on large projects. Organization and task prioritization. \n, • Position requires a minimum of 5 years background in the design of packaging for electronic parts. \n, • 5 years experience using a CAD tool. \n, • Associates degree or greater in Design. \n, • Proven ability to evaluate manufacturing capability of packing material from subcontractors. \n, • Proven ability to evaluate design capability of packing material subcontractors. \n, • The individual must be a self-starter. \n, • Knowledge of Government and Commercial standards concerning packaging and documentation is required. \n, • Proven ability to work with Engineering, Purchasing, QA and Manufacturing. \n\n In compliance with pay transparency requirements, the salary range for this role is $35,000- $80,000. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including relocation stipend, 401(k), EAP, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Operations Associate 2 - Paint and Coating Specialist Job Location: Camden Schedule: 9/80 L3Harris is dedicated to recruiting and developing diverse, high-performing talents who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. Job Description: Conformal Coating Specialist This position is a bargaining unit-represented position. We are seeking a skilled, detail-oriented Conformal Coating Specialist to join our manufacturing team. This role is responsible for applying conformal coatings to electronic assemblies and printed circuit boards (PCBs) to protect products from environmental damage. The ideal candidate demonstrates precision, strong attention to detail, and familiarity with coating materials and application techniques. On-the-job training will be provided. Key Responsibilities: \n • Train on and perform the application of conformal coatings to electronic assemblies and PCBs using methods such as spraying, brushing, and automated application systems.\n, • Inspect and prepare surfaces prior to coating application, ensuring cleanliness and proper adhesion.\n, • Operate, monitor, and maintain coating equipment including spray booths, curing ovens, and inspection tools.\n, • Perform visual and functional inspections to verify coating thickness, coverage, adhesion, and overall quality.\n, • Identify, troubleshoot, and resolve coating defects and process issues.\n, • Accurately document process steps, inspections, and results as required.\n, • Follow all safety procedures, ESD controls, and maintain a clean, organized work environment.\n, • Collaborate with engineering and production teams to improve coating processes and product quality.\n, • Obtain and maintain IPC-A-610 and/or IPC J-STD-001 certification.\n, • High school diploma or equivalent.\n, • U.S. Citizenship required with the ability to obtain and maintain a Secret Security Clearance.\n, • Familiarity with conformal coating materials such as acrylic, silicone, urethane, and epoxies.\n, • Familiarity with coating application equipment and techniques.\n, • Ability to perform detailed work under magnification when required.\n, • Ability to sit or stand for extended periods and handle small components with precision.\n, • Knowledge of ESD (Electrostatic Discharge) protection practices.\n, • Ability to obtain IPC-A-610 and IPC J-STD-001 certifications on the first attempt or within two attempts.\n, • Ability to read and interpret engineering drawings, schematics, and technical documentation.\n, • Strong attention to detail, manual dexterity, and quality-focused workmanship.\n, • Ability to work in environments with exposure to coating materials, solvents, fumes, and vapors associated with conformal coating application and compound mixing, while adhering to established safety and PPE protocols.\n, • Ability to safely wear and use required personal protective equipment (PPE), including respirators, during spray application and coating processes, in accordance with safety and fit-testing requirements.\n, • Effective communication skills and ability to work collaboratively in a team environment\n, • Experience in electronics manufacturing or high-tech production environments.\n, • Experience with mechanical assembly, hand soldering, and self-inspection.\n, • IPC-A-610, IPC -620, and/or IPC J-STD-001 certifications.\n, • Completion of a certified technical or vocational training program.\n, • Basic computer skills for documentation and record-keeping.\n, • Proven experience applying conformal coatings in an electronics manufacturing environment.\n L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .

Summary The Director, Technical Services, is responsible for launching, leading, and growing Willdan's technical services national business. This role focuses on helping organizations get more out of the facilities and assets they own, operate and/or maintain by optimizing air, power, water, and HVAC systems, and aligning solutions with clients' internal goals, including sustainability, which includes comprehensive commissioning and retro-commissioning services. Forward looking, this could also include light O&M style services such as HVAC filter replacement & maintenance, light electrical and controls upgrades, etc. The Director owns strategy, offering development, gotomarket, and delivery oversight for a portfolio of Assess-Improve-Sustain services that deliver healthier, lowercost, and more reliable building performance. Essential Duties and Responsibilities • Strategy & Business Leadership, • Define and own the vision, business plan, and growth strategy for Willdan's Building Optimization Solutions offering., • Translate the Assess-Improve-Sustain model into clear, standardized services and packages deployable across regions and markets., • Establish performance targets (revenue, margin, savings delivered, client outcomes) and report progress regularly to Regional Vice President for Rocky Mountain Region goals and Willdan leadership for additional national goals and KPIs., • Identify and prioritize target markets (K12, municipal, higher education, healthcare, commercial/industrial, water/wastewater) and align offerings with their internal goals., • Collaborate with other business development managers & divisions regularly to ensure cross-collaboration is happening to sell greater Willdan services, including comprehensive design-build and ESPC opportunities., • Offering Development and Technical Direction, • Develop and maintain the Building Optimization Solutions portfolio, including VPW (Ventilation, Power, Water) optimization, HVAC system optimization, and integration of renewable energy and advanced energy storage solutions., • Ensure offerings deliver on the core value promise: healthier environments, lower cost, and more reliable operations by optimizing existing systems first, and recommending equipment upgrades when they make financial and operational sense., • Incorporate relevant standards and guidance (e.g., ASHRAE 62.1, 241, wildfire smoke/IAQ guidance) into practical methods, tools, and playbooks for project teams., • Define criteria for when to prioritize optimization versus planning HVAC equipment replacements and upgrades., • Business Development and Market Positioning, • Partner with national business development and account teams to position Building Optimization Solutions & turnkey (design-build or ESPC) with existing and new clients., • Lead key client conversations to understand internal goals (e.g., sustainability, resilience, cost control) and frame tailored optimization roadmaps., • Develop proposal content, pricing approaches, and sales tools that clearly articulate the Assess-Improve-Sustain journey and associated value., • Represent Building Optimization Solutions at client meetings, conferences, webinars, and industry events., • Delivery Oversight & Quality, • Provide leadership and oversight to crossfunctional teams delivering Assess, Improve, and Sustain scopes., • Director must develop project in accordance with WPE process and guidelines., • All proposals and deliverables must be reviewed and approved by the VP of Business Development & Engineering before issuance to customers., • Establish delivery standards, templates, and QA/QC processes for assessments, optimization projects, and ongoing support to ensure consistency and quality., • Guide project teams on integrating HVAC equipment replacements and upgrades into optimization plans where warranted., • Support practical performance tracking and reporting thatdemonstrateimprovements in health, cost, and reliability., • Partnerships and Funding Integration, • Coordinate with internal teams to integrate Building Optimization Solutions into their qualified opportunities., • Collaborate with technology and equipment partners (e.g., HVAC and controls providers) when their solutions support systemlevel optimization outcomes., • Help design commercial structures that enable low and noupfrontcapital pathways for clients where appropriate., • Client Relationship Leadership, • Serve as an managerlevel point of contact and trusted advisor for strategic Building Optimization clients., • Lead periodic review conversations to revisit performance, refresh opportunities, and reinforce Willdan's role as a continuous improvement partner beyond the initial project., • 10+ years of experience in building systems, HVAC/MEP, energy engineering, performance contracting, or related fields., • Demonstrated experience developing and/or selling optimizationfocused solutions (e.g., controlsdriven savings, RCx, VPW, active energy management)., • Strong understanding of ventilation, power, water, and HVAC system operation in institutional and commercial facilities., • Proven ability to develop service offerings, set pricing strategies, and contribute to revenue and margin goals., • Excellent communication skills with experience engaging executivelevel decision makers and crossfunctional internal teams., • Ability to travel at least 50% of the time. Travel may include various means of transportation including automobile, public transportation, rail, and airplane., • Preferred Experience:, • Experience with publicsector and education markets (e.g., K12, municipalities, higher education, commercial facilities)., • Familiarity with relevant ASHRAE standards and IAQ/wildfire smoke guidance. Willdan Energy Solutions participates in E-Verify.

Job DescriptionChief Engineer Able Services Field – Engineering, Building Engineer /Full time /On-siteCompensation: $50.04 per hourLocation: Philadelphia, PA JOB SUMMARY: Responsible for the overall supervision of the engineering department within the facilityassigned. These duties include but are not limited to the installation, repair and maintenanceof the facility equipment. The oversight and upkeep of the physical plant, including grounds,utility services, HVAC, plumbing, electrical system, electronic equipment, yard and pavementupkeep in the best manner possible for the safety and health of all concerned, and tocoordinate these activities as needed.Responsible for the implementation and documentation of site safety plans and all AbleEngineering Services operational standards and guidelines as well as site specific standards,policies and procedures relating to the engineering department. Page 2 of 2 REPRESENTATIVE FUNCTIONS OR DUTIES:Provides supervision and is responsible for the implementation of all preventive maintenanceand repair operations at the facility. Schedules emergency repair activities according topriority and the abilities of assigned personnel. Provides technical advice, encouragement andinstruction to subordinates in such areas as electric theory, mechanical systems, hydraulicsystems, and safety procedures. Perform equipment inspections, noting equipment condition,ensuring that proper maintenance is being performed in accordance with AES standards. Responsible for the implementation of the quality assurance program for all work performed bythe department. Direct or participate in various facility programs and committees relating to assignedresponsibilities such as safety, disaster, fire, pollution control and civil defense. Formulates, recommends and implements site specific policies and procedures to improve thefacility physical plant and operations. Develops a plan and/or procedure for controlling, labeling, recording estimated life expectancy,maintenance and inspecting all capital and non-capital equipment within the facility. This planincludes a long-term engineering capital plan. Recommends equipment purchases to replace obsolete equipment items and provideassistance in formulating long-range equipment replacement requirements and coordinatesactions with contractors. Assists in the development and implementation of operating and extraordinary expensebudgets as required. Plans and schedules services of department. Establishes standards and work methods; takessteps to assure quality and quantity of performance and evaluates results. Establishes plansfor improving departmental work emphasizing efficiency and economy. Communicates policies and procedures, discusses job problems, and employee concerns withsupervisors and employees. Encourages development of habits and attitudes for improved performance and good employee attitudes. Direct, train, evaluate, and counsel all engineeringpersonnel. Ensures that general safety, fire prevention regulations are enforced, and safe working habitsare promoted throughout the facility. Ensures that all shop equipment is properly maintainedand conforms to safety standards. Promotes good housekeeping principles and superviseshousekeeping details. Responsible for ensuring that the building systems are operated in the most efficient andeffective manner especially as it relates to utility consumption and environmentalresponsibility. Implement a systematic program to promote energy awareness andconservation within the facility. Champion energy conservation programs to achieve maximumresults from tenants and staff. Maintains an on-going self-improvement program to keep abreast of new equipment,standards, codes, and maintenance procedures. Responsible for the implementation and promotion of the following:  Supports and follows Able Engineering Services’ operational policies and standards. Supports and follows Able Engineering Services’ safety program. Perform related duties as required – a “can do, will do” attitude. Reports to and collaborates with management of the facility related issues. Works with management on plant related and tenant related issues. Sets and maintains a professional work environment with staff. Assures good communication. Ensure standards of service and commitment. Ensure compliance with safe practices and standards. Develops goals for department, staff and self. Builds morale and a team approach. Complies with employment laws and Able Engineering Services employment practices. Supports growth opportunities and potential. SKILLS / EDUCATION / EXPERIENCE:  Experience that is commensurate with the specific facility for the position of ChiefEngineer. Prefer 5+ years progressive operations experience.  Strong employee relation skills, coaching skills and training skills. As required, highest-level relevant state/local license for Stationary Engineer and/orHVAC, plus universal level refrigerant recovery license. BOMA accredited courses desirable. Preferred: High-rise Fire Safety Director, Haz-Mat Certification, Indoor Air QualityCertification, LEED Certification.  Strong oral and written communication skills. Ability to work with MS Word, Excel, and Outlook.  Computer skills and building automation systems experience required. Certification meeting OSHA ACM awareness training requirements as required. Working knowledge of energy conservation required, formal training preferred. #200Essential Duties and ResponsibilitiesPay: $50.04 per hour The pay listed is the hourly range or the hourly rate for this position. A specific offer will vary based on applicant’s experience, skills, abilities, geographic location, and alignment with market data. Benefit Information:ABM offers a comprehensive benefits package. For information about ABM’s benefits, visit ABM ABM Employee Benefits \u007C Front Line Team Members \u007C ABM Employee Benefits \u007C Front Line Team Members \u007C (Programa de Beneficios de ABM) We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: • Our people are our #1 priority., • Teamwork is the best way to solve problems., • Safety is critical. Everyone is responsible for creating a safe work environment., • We strive to find new and better ways of doing things every day., • Clear expectations and directions are always given., • Frequent coaching and support lead to great performers and high quality for our customers., • A manager's job is to set each employee up for success every day., • We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together., • Performing arc and torch cutting and gouging., • Using generators, compressors, tuggers, blowers, grinders, and other power and air tools., • Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o’clock and “goat”/tractor)., • Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment., • Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment., • Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations., • Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment., • Operating forklifts, man lifts, boom lifts, and other large lifting equipment., • Knowledge of crane operations (including rigging and signaling), • Reading detailed erection and fabrication drawings., • Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks., • Completing job safety analysis, safety audits, site-specific training, and other safety training., • Follow directions and work professionally with other crew members. \, • Other duties as assigned. Requirements, • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development. BVrnBnrUVL

Job Description OCF Realty is a leading property management firm based in Philadelphia that is committed to providing exceptional services across a diverse portfolio of residential properties. We are currently seeking an Inspector to join our property management department. Reporting to our Inspection Manager, this role will collaborate closely with our maintenance team, conducting field visits to managed properties for routine inspections and assisting with documenting priority maintenance requests. This individual will be responsible for regularly uploading property inspections and submitting detailed reports to our property management platform, Appfolio. Since you will be using technology to expedite your work, computer knowledge is required. If you have a strong work ethic, are energized by problem-solving in the field, and find fulfillment in submitting detailed reporting, you may be an excellent fit. This position offers a salary of $40,000 - $50,000 commensurate with experience and includes a comprehensive benefits package that includes paid time off, medical and dental insurance, and 401(k) matching. Compensation: $40,000 - $50,000 yearly Responsibilities: • Perform detailed property inspections for OCF-managed properties., • Utilize Google Photos and company cell phones to document and organize inspections comprehensively, ensuring clear and accurate records of property conditions., • Report essential findings tied to photographic records in our property management software, Appfolio, facilitating efficient communication and documentation., • Perform minor repairs and routine maintenance requests such as air filter changes, pest control, light bulb changes, changing locks, etc., • Taking corrective action when possible in common spaces and vacant units, such as tidying mail, picking up trash, etc., • Support key management efforts by assisting with key testing, duplication, lock-outs, and drill-out locks when necessary., • Valid driver's license required., • Keen eye for spotting and diagnosing repair issues, and being able to quantify the problem., • Proficiency in Google Suite and experience collaborating in Google Docs, Google Sheets, and Google Photos., • Excellent time management and organizational skills., • Manual dexterity and problem-solving skills., • Knowledge of general maintenance processes and methods., • Prior experience in property management preferred. You will thrive in this position if you: • Are adaptable and flexible. You understand that things can evolve quickly in this industry and can pivot at a moment's notice without missing a step., • Are driven by deadlines. You take responsibility for your deadlines and understand how your role supports the team’s monthly and quarterly goals. OCF Realty is a neighborhood-focused real estate brokerage providing comprehensive services in property management, home buying and selling, and real estate development. With offices in South Philadelphia and Margate, NJ, our team consists of expert leasing and real estate Agents specializing in neighborhoods. We believe a thriving neighborhood is one where individuals and businesses have mutually beneficial relationships, and we are passionate about fostering that connection. We are committed to creating a healthy and vibrant community, and we are honored to be a part of it.

Job DescriptionCompany Description Eurofins Scientific is an international life sciences company, providing a unique range of analytical testing services to clients across multiple industries, to make life and our environment safer, healthier and more sustainable. From the food you eat, to the water you drink, to the medicines you rely on, Eurofins laboratories work with the biggest companies in the world to ensure the products they supply are safe, their ingredients are authentic, and labelling is accurate. Eurofins is dedicated to delivering testing services that contribute to the health and safety of society and the planet, and to its corporate responsibility to protect the environment and ensure diversity, equity, and inclusion across the entire network of Eurofins companies. Job Description The Sales Account Executive is a client facing outside sales role operating within an assigned region of the Mid-Atlantic states. This involves identifying and managing client accounts and business opportunities for Eurofins Built Environment Testing Division. Built Environment is a group of laboratories that provides Indoor Air Quality (IAQ) testing for things such as mold, asbestos, Legionella, etc. The Account Executive will travel throughout the region to meet with clients. This individual must be comfortable with cold calling and taking initiative to bring in new business as well as cultivate existing relationships. Knowledge and understanding of environmental laboratory testing is ideal, specifically in indoor air quality testing, USP797 testing or Legionella testing. This role will travel throughout the territory (New York, Pennsylvania, New Jersey). Approximately 50% travel. As part of the sales team, you will focus on: • Maximizing market share, profitability, competitive advantage and capacity utilization in the environmental analytical services market., • Establish and maintain productive relationships with Eurofins clients., • Provide vision and acquire new accounts to sustain growth of the business by representing Eurofins, clearly communicating Eurofins services to new customers and markets., • Identify opportunities and profitable work by following up on leads, negotiating, and closing., • Responsible for meeting individual revenue as well as the goal for assigned region., • Establishes and maintains a productive working relationship between the client and laboratory., • Ensures customer awareness of Eurofins Environment Testing capabilities and services to improve selling opportunities., • Provides sales plan forecast for assigned region., • Reviews credit status of both new and existing customers prior to submitting bids or proposals for new work., • Monitors accounts receivable status for accounts assigned and resolves collection issues as required., • Develops and recommends strategies to facilitate pricing and bid/no bid decisions, establish Master Service agreements and provide budgetary information., • Develops client profiles and determines potential and ability to fund work., • Develops, qualifies, tracks, and closes leads to increase revenue., • Reports sales activity within assigned area., • Updates customer databases to identify business opportunities., • Maintains productive relationships between customers and the Eurofins Environment Testing organization., • Develops and implements account plans detailing specific clients, revenue goals and related account objectives to attain regional revenue quotas., • Identifies key target markets and major accounts and develops strategies within assigned area of responsibility to attain market position for Eurofins Environment Testing and maintain profitability., • Establishes, coordinates, negotiates, and completes Master Service, • Agreements with customers which both defines customers’ specific needs and streamline processes., • Within area of market responsibility collects and documents information to establish pricing and evaluate Eurofins Environment Testing’s ability to meet customer requirements to meet win/loss ratios, average discount percentages and profitability., • Effectively communicates customer needs and wants to Eurofins Environment Testing, • Customer Service Managers and Project Managers to facilitate successful completion of work., • Completes summaries of sales development activities as directed by GM., • Communicates all business opportunities (e.g. bids, quotes, proposals, and pricing inquires) by providing copies or entering information into Eurofins Environment Testing’s database., • Follows up on all outstanding bids, quotes, proposals, and price inquiries in order to achieve successful completion of the sales cycle., • Negotiates pricing and contractual issues within area of responsibility with the approval of the GM., • Presents Environment Testing as a network of laboratories not limited to lab facilities within a geographical region to improve operational efficiencies., • Controls expenses with respect to the selling function pursuant to Eurofins Environment Testing’s policy and with approval by GM., • Assumes role as “sponsor” for National Accounts as needed., • Provides feedback on market conditions within area of responsibility to facilitate the development of new products and services., • Maintains relationship with one or more of Eurofins Environment Testing’s network facilities to sustain awareness of operational issues related to Eurofins Environment Testing’s ability to meet customer requirements., • Provides information concerning business opportunity outcomes with respect to win/lose ratios and future pricing strategies., • Provides forecasting information to Customer Service Managers to assist operational staff with resource and operational planning., • Assists with the development of sales materials., • Gathers and communicates intelligence information on competitors within area of responsibility., • Identifies and communicates opportunities for new products and services within assigned region.Qualifications Basic Minimum Qualifications: • Degree in Sciences or related field preferred but not required, • Minimum 2-3 years progressively successful sales experience in a service industry, • Ability and willingness to travel throughout the assigned territory. Approximately 50% travel. Some overnight travel may also be required., • Environmental industry knowledge., • Sales specific skills of identification of prospects, interviewing, negotiating, and closing, • Strong interpersonal skills, • Excellent written and verbal communication skills, • Sales acumen/sales skills, • Lab experience and exposure to environmental industry preferred., • Writing sales and account plans, • Working computer skills, • Familiarity with lab functions and terminology, • Analytical skills, • Planning skills, • Self-directed, • Ability to work in an unstructured environment Additional Information Requirements: • Authorization to work in the United States indefinitely without restriction or sponsorship Salary Range: minimum of $70,000/yr base + Commission with benefits, PTO and company matching 401K plan. **Salary range could be higher for candidates with specific sales experience in environmental testing, especially Indoor Air Quality (IAQ) testing. Eurofins Environment Testing (USA) provides a compensation range for informational purposes, the actual base salary may vary based upon, but not limited to, relevant experience and skill set, base salary of internal peers, business sector, and geographic location. As a Eurofins employee, you will become part of a company that has received national recognition as a great place to work. we offer excellent benefits including comprehensive medical coverage, life and disability insurance, 401(k) with company match, paid holidays, paid time off, and dental and vision options. *The benefits package offered will vary based on the employee's full-time or part-time regular status. To learn more about Eurofins, please explore our website . We support your development! Do you feel you don’t match 100% of the requirements? Don’t hesitate to apply anyway! Eurofins companies are committed to supporting your career development. We embrace diversity! Eurofins network of companies believe in strength and innovation through diversity, being an Equal Opportunity Employer. We prohibit discrimination against employees or applications based on gender identity and/or expression, race, nationality, age, religion, sexual orientation, disability, and everything else that makes employees of Eurofins companies unique. Sustainability matters to us! At Eurofins, we believe sustainability is at the heart of everything we do. Guided by our vision to be the Global Leader in “Testing for Life,” our mission to contribute to a healthier and safer world, and our core values, we are building a strong foundation for Environmental, Social, and Governance (ESG) initiatives. Eurofins’ commitment to sustainability begins within our own companies through a shared responsibility to people and the planet. With climate change posing an imminent threat, Eurofins and its many companies recognize their duty to proactively reduce or offset the environmental impact of essential operations while also helping our clients do the same—serving as a true ESG Enabler. Find out more in our career page: Company description: Eurofins Scientific is an international life sciences company, providing a unique range of analytical testing services to clients across multiple industries, to make life and our environment safer, healthier and more sustainable. From the food you eat, to the water you drink, to the medicines you rely on, Eurofins laboratories work with the biggest companies in the world to ensure the products they supply are safe, their ingredients are authentic and labelling is accurate. The Eurofins network of companies is the global leader in food, environment, pharmaceutical and cosmetic product testing and in discovery pharmacology, forensics, advanced material sciences and Eurofins Scientific 2/2 March 2023 agroscience contract research services. It is one of the market leaders in certain testing and laboratory services for genomics, discovery pharmacology, forensics, advanced material sciences and in the support of clinical studies, as well as having an emerging global presence in Contract Development and Manufacturing Organisations. It also has a rapidly developing presence in highly specialised and molecular clinical diagnostic testing and in-vitro diagnostic products. In over 35 years, Eurofins has grown from one laboratory in Nantes, France to 61,000 staff across a decentralised and entrepreneurial network of ca. 900 laboratories in 61 countries. Eurofins companies offer a portfolio of over 200,000 analytical methods to evaluate the safety, identity, composition, authenticity, origin, traceability and purity of biological substances and products. In 2025, Eurofins generated total revenues of EUR 7.296 billion, and has been among the best performing stocks in Europe over the past 20 years. Eurofins USA Environment Testing is a Disabled and Veteran Equal Employment Opportunity employer.

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Competitive salary, • Dental insurance, • Flexible schedule, • Health insurance, • Paid time off, • Parental leave, • Profit sharing, • Vision insurance HETI has a great opportunity for a Senior Geologist/Senior Environmental Scientist/Senior Engineer with 10+ years experience in the environmental field. This role will be responsible for providing technical and business skills and contribute to advanced solutions in the environmental, chemical, commercial, manufacturing, government, energy, financial, insurance, and/or legal sectors. This job is 100% remote. The candidate should have experience managing consulting assignments, must work effectively in multi-disciplinary teams, is expected to be proficient in the analysis and communication of information, and must be able to work cooperatively with agencies, organizations, and individuals to guide decision-making. The successful candidate is also expected to be proficient in all facets of project management. He/she must demonstrate collaboration with colleagues throughout the organization. Key Responsibilities include but are not limited to: Client Management & Communication: • Serve as the primary point of contact for clients and stakeholders, providing regular updates on project status and outcomes., • Collaborate with project teams, including environmental engineers, geologists, and technicians., • Interact and coordinate with regulatory agencies to obtain necessary approvals, permits, and closure documentation., • Prepare and submit comprehensive reports, including site investigation reports, risk assessment reports, remedial action plans, progress reports, and closure reports., • Develop and implement effective remediation plans based on the findings of site investigations and risk assessments., • Design and oversee the implementation of remediation strategies, which may include excavation, soil vapor extraction, groundwater treatment, in-situ bioremediation, or other appropriate methods., • Ensure compliance with all applicable regulations, guidelines, and permits during the remediation process.Insurance Claim Support, • Experience providing technical support to insurance claims professionals for environmental or energy related claims., • Understanding of insurance terminology and policy language., • Experience in assessing the source and timing of pollution events., • Diverse environmental consulting experience., • Excellent technical writing skills.Site Assessments:, • Manage/conduct comprehensive site investigations to identify potential sources of contamination, evaluate risks, and develop appropriate remediation strategies., • Collect soil, groundwater, and other environmental samples and analyze them in accordance with standard protocols and regulations., • Perform data interpretation, risk assessment, and modeling to determine the extent and nature of contamination and its potential impact on human health and the environment.Quality Control:, • Implement quality control and assurance measures to ensure accurate and reliable data collection, analysis, and reporting., • Conduct periodic audits and reviews of project activities to verify compliance with project plans and regulations., • Current PE or PG license, • Bachelors Degree in environmental science, geology, engineering, or a related field., • 10+ years experience conducting site investigations remediation and third party evaluations, • Solid understanding of environmental regulations, guidelines, and best practices related to contaminated site cleanup., • Excellent project management skills, including the ability to prioritize tasks, meet deadlines, and manage multiple projects simultaneously., • Strong communication and interpersonal skills, with the ability to collaborate effectively with clients, regulatory agencies, and project teams., • Attention to detail, critical thinking, and problem-solving abilities., • Knowledge of environmental sampling techniques and laboratory analysis methods. Founded in 1986, HETI is a full-service, nationwide environmental services company specializing in environmental and indoor air quality site assessment, site remediation, risk characterization, occupational health and safety services, and litigation/expert witness support. Through our network of offices throughout the U.S., we serve a variety of large and small businesses. We are an Equal Opportunity Employer and offer a competitive benefit package including base salary plus bonus opportunities and a friendly, flexible work environment. Flexible work from home options available.

Job Description About Mishimoto Mishimoto is the flagship brand of Resource Intl., the world leader in performance cooling products, and was created for automotive enthusiasts by automotive enthusiasts. Established in 2005, we have two decades of experience in working toward our goal of providing superior cooling system upgrades. Mishimoto has produced a line of upgrades to fit nearly any application, including sport compacts, powersports, trucks, Jeeps, muscle vehicles, daily drivers, and the classics. Mishimoto's corporate headquarters is located in a 67,610 sq. ft. office, warehousing facility, and state-of-the-art engineering studio, where we have assembled the industry's cutting-edge tools for evaluating Mishimoto test vehicles in Garnet Valley, PA. This one-of-a-kind facility allows us to maintain a leading position in our industry, with another office in Sparks, Nevada, as well as international locations in Stourbridge, UK, and Yangzhou City, China. We have built an unprecedented global infrastructure for the benefit of all our worldwide customers. Benefits and Perks Our employees love our workplace because: • It's a gearhead's dream – Design and develop performance automotive products for the car scene., • We make way for play – Attend Wine and Cheese gatherings and hit up our favorite events, from drift to autocross to classic car shows., • We take a breather – Enjoy an in-house gym, massage chair, and healthy snack vending machine., • Our workplace is beautiful – Work in an office designed to stimulate creative thinking., • The employee discounts rock – Get exclusive access to Mishimoto products and discounts from our partners., • The bennies – Medical, dental, vision, paid time off, 401(k) w/ 4% match, disability pay, and life insurance., • We score – bonus program is tied to overall company performance goals. What You'll Do: • Design and prototype of new aftermarket automotive parts using CAD software (e.g., SolidWorks)., • Perform product testing and validation activities (performance, durability, and fitment)., • Participate in design review and the engineering change process., • Create detailed Engineering Reports to describe test procedures and results both within the company and externally to customers., • Perform, document, and participate in consumer marketing content creation for the removal and installation of automotive components and systems., • Participate in supplier evaluations, quality inspection, and corrective actions., • Collaborate with the engineering team to support continuous improvement of our engineering and design processes. Better-designed products are a result of you and the team brainstorming ideas and then implementing the changes., • B.S. in Mechanical Engineering from an ABET-accredited university, or related degree., • 1 to 3 years of experience in Original Equipment Manufacturing, auto manufacturing, heat exchange, engine cooling, or air intake development., • Basic knowledge of 3D-modeling software, 3D scanning, 3D printing, and their application to the design process., • Basic knowledge in GD&T and 2D drawing creation., • Basic knowledge of automotive components and systems., • Understanding of fluid dynamics and thermodynamics., • Understanding of manufacturing and quality control processes, material selection, and assembly methods., • Hands-on experience working on vehicles., • Hands-on experience with sheet metal fabrication tools., • Timeliness and attention to detail are critical., • Electromechanical design experience building custom machinery or test rigs., • Bonus points for having a personal passion for auto products and the industry. You'll be able to take your consumer mindset and put it to work. Nobody knows what a car enthusiast wants in a product better than a car enthusiast., • Teamwork & Collaboration - you know your stuff, and you can engage with your colleagues in a positive, productive way., • Innovative - Capable of coming up with unique ideas and solutions to design new products., • Problem-Solving - Ability to break down complex problems, think critically, and devise creative solutions. Manufacturing issues happen. Your keen insight and troubleshooting will help Project Managers and Suppliers during the production process., • Communication - Excellent written and verbal communication skills to articulate technical concepts to both technical and non-technical stakeholders., • Adaptability - Willingness to learn and adapt to new technologies, industry trends, and evolving user needs., • Creating data analysis reports triggers the "engineering nerd" in you., • You have an eye for cleanliness and organization (We keep a clean shop)., • You are eager to assist in the presentation of product discussions for social media video clips and installation videos. You're proud of your work, and you want to be able to share it with others., • You approach product development with an uncompromising commitment to industry standards and OEM compatibility. Your goal is to deliver aftermarket parts that integrate seamlessly while offering real improvements., • You believe in getting your hands dirty and spending time with actual vehicles and parts — not just CAD files — to ensure that what we engineer works in the real world, not just on paper., • Role is on-site at Mishimoto's Garnet Valley, PA facility., • Requires flexibility, including hours availability to work outside a Monday–Friday 8:30 – 5:00 pm schedule as needed., • Must be comfortable being on camera for product marketing content (less than 5%)., • Must be able to lift 50 lb., • Must be capable of standing, maneuvering, and working on vehicles for up to 8 hours per day., • Must be comfortable working in a garage and machine shop environment (Points will not be deducted for fingernail grease on interview day!)., • Light travel (less than 10%) may be required., • Valid driver's license

Job DescriptionDescriptionSenior Field Technician – Air Quality and EmissionsPhiladelphia, Pennsylvania RWDI is a global climate and performance engineering consulting firm that helps its clients redefine what’s possible by overcoming design and operational challenges, while minimizing environmental, user, and resource impact. With deep technical expertise across a broad range of services, we drive success on ambitious building, industry, and infrastructure projects. We are a values-based organization, which means everything we do relates back to our three core values: innovation, integrity, and integration. So, when we look for new people to join our team, alignment to these values is a vital piece of our people puzzle. Here’s what this looks like: • You push the boundaries of what’s possible., • People know they can rely on you to follow through on your commitments. RWDI is seeking a Senior Field Technician – Source Emissions to direct and execute complex source testing projects across various industrial sectors. This role combines hands-on fieldwork with leadership and client-facing responsibilities. You will oversee field testing programs, ensure regulatory compliance, and mentor junior technicians, all while maintaining the highest standards of safety and data integrity. This posting represents a currently available full-time, permanent position. Key Responsibilities • In the field lead project team and perform on-site stack testing and source emissions monitoring in accordance with federal and regional regulatory methods (e.g., EPA Reference Methods, ECCC)., • Plan and manage assigned field deployments, including crew logistics, equipment preparation, and safety procedures., • Analyze collected data and ensure QA/QC protocols are strictly followed throughout testing and reporting processes., • Serve as a technical liaison with clients, regulators, and internal teams to communicate project scope, progress, and findings., • Train, mentor, and oversee junior field technicians and new team members on project assignments., • Troubleshoot and maintain analytical and sampling skills equipment, ensuring accuracy and reliability., • Support project scoping, scheduling, and budgeting in collaboration with project managers and senior leadership., • Keep current with evolving environmental regulations and industry best practices as a team., • Prepare high-quality technical reports, including regulatory documentation, emissions data summaries, and field observations. Skills, Knowledge and ExpertiseWe are accepting applications from candidates with the following qualifications: • Post-secondary education in Environmental Technology, Engineering, Chemistry or a related field., • Preferably, a minimum of 5-years experience working in the Air Quality field, • Ambient monitoring experience is an asset, • Strong computer and analytical technical “hands-on” skills, • An aptitude for practical problem-solving, • Field/site experience is a definite asset, • Must be legally eligible to work in the United States., • Must have a valid driver's license.Candidates should also possess:, • Excellent written and verbal communication skills, • Strong people and team skills as well as being highly motivated, • An ability to work in a fast-paced team environment with no supervision, • Exceptional organizational capabilities, coordination, and consultation skills, • Willingness to travel, and work outdoors including working long hours, evenings, and weekends, • Comprehensive Health Benefits, • Opportunities for career advancement, • Travel perks and adventure opportunities, • A supportive and inclusive workplace culture, • Learning Spending Account, • 401K Matching

Job Description Bacik Group is actively searching for a Senior Electrical Engineer - Medium - High Voltage Power Design - to support the FAA's Facilities Engineering Branch in Atlantic City, New Jersey. Candidate will provide expertise in the application of state-of-the-art technology to meet the mission requirements of the Customer with a primary focus on facility and site infrastructure and systems. The candidate must possess, at a minimum, a Bachelor’s degree in Electrical Engineering from an accredited college or university. Duties • Experience working on critical systems and technologies, including lightning and surge protection systems, lighting systems, electrical panels, arc flash hazards analysis, substations, switchgear, branch circuits, feeders, and transformers., • Conduct Electrical Power Surveys, • Design Electrical Modifications to buildings and equipment., • Provide estimates and support design and construction efforts., • Support the development of the electrical portion of the A/E SOW & cost estimates, design reviews/comments, progress meeting attendance, • Determine electrical loads requirements, and develop any documentation required to support the design., • Develops Scopes of Work., • Identify power panels, air conditioning units, etc. utilizing correct equipment name/designation, • Create a correct single line tracing all the electrical panels all the way up to the substation where they are connected. Identify transformer sizes, correct breaker sizes, and breaker amperage rating as well as breaker trip rating., • Gather electrical readings and add information to single line diagram. If drawings, single line diagrams, and layouts are already available, verify accuracy, correct any errors, and provide information., • Support design of Lightning and Surge Protection, Grounding, Bonding, and Shielding Requirements for Facilities and Electronic Equipment., • Communicate effectively with the FAA Electrical Engineering team and project stakeholders., • Support cable TV and internet connectivity initial installation and troubleshooting., • Identifies potential hazards and implements mitigation methods., • ·Maintains knowledge of current electrical and building codes and technologies through research and training., • ·Assures assigned projects comply with applicable codes and standards, including FAA Orders and directives., • ·Collaborates with other engineers and design professionals to create complete design packages., • ·Coordinates project activities with other agencies, contractors, utility companies, state and local government authorities, and the general public. Qualifications: • MUST HAVE a minimum of a Bachelors Degree in Electrical Engineering, • Must be eligible to work in the United States., • Must be able to obtain FAA Suitability / Public Trust Clearance Job Types: Full-time, Contract Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • 8 hour shift, • Monday to Friday Education:

Job Description Mitsubishi Electric Trane HVAC US LLC is looking for an Assistant Manager, Warehouse to support the outbound operation in Philadelphia, PA. This role is for 1st shift (7:00AM - 3:30PM, but may adjust based on seasonality of business) POSITION SUMMARY: This position is responsible for warehousing and distribution management in an HVAC Distribution Center (DC). It involves outbound fulfillment of inventory, training of resources, and recruiting. ESSENTIAL FUNCTIONS The essential functions of the position include, but are not limited to the following: * Execute a flawless DC operation for Mitsubishi Electric Trane HVAC. * Accomplishes warehouse human resource objectives by selecting, orienting, training, assigning, scheduling, coaching, counseling, and disciplining employees; communicating job expectations; planning, monitoring, appraising job contributions; recommending compensation actions; adhering to policies and procedures. * Meets warehouse operational standards by contributing warehouse information to strategic plans and reviews; implementing production, productivity, quality, and customer-service standards; resolving problems; identifying warehouse system improvements. * Conduct performance evaluations of subordinates and provide constructive and positive feedback as earned. * Approve time sheets and time off schedules. Schedule associates according to the needs of the business to meet the needs of our customers. * Lead and drive continuous improvement in various activities of the warehouse, including safety, audit readiness, and efficiencies. * Maintain working knowledge of all direct report responsibilities and provide coverage support when needed. * Assist DC Manager in meeting warehouse financial standards by providing annual budget information; monitoring expenditures; identifying variances; implementing corrective actions. * Effectively manage issues and evaluate continuous improvement opportunities with warehouse team, recommend, and implement departmental policies and procedures, processes and methods. * Moves inventory by scheduling materials to be picked, packed, and shipped from warehouse, manages dock schedule for all modes of transportation, coordinates movements of trailers within yard, coordinates inventory transfers with related departments. * Supervise warehouse associates, monitoring work, adherence to company policies/ standards, ensuring safe use of warehouse equipment, and engaging with EHS for safety audits and improvements. * Delivers supplies and equipment to departments by receiving and transferring items. * Maintains storage area by organizing floor space; adhering to storage design principles; recommending improvements. * Foster a strong Safety Culture by consistently enforcing safety policies, training team members, and holding them accountable. Actively support the Safety Committee, collaborate with warehouse leaders to address safety concerns, and work with the EHS Leader to identify and close gaps in safety practices. * Keeps equipment operating by enforcing operating instructions; troubleshooting breakdowns; requiring preventive maintenance; calling for repairs. * Assist with inspecting outbound to ensure current shipping standards are met as well as tracking any discrepancies. * Maintaining RF and portable printer stock levels and tracking/repairing damage equipment. * Working interdepartmentally to help identify and correct issues. * Perform other duties as assigned. QUALIFICATIONS: * High School Diploma or equivalent required. BS preferred * Bilingual in Spanish preferred * 5+ years of experience in a distribution environment * 5+ years managing a team * ERP/SAP experience required * Forklift certification/License required * Strong customer service orientation, distribution experience required. * Highly organized with a focus on meeting deadlines. * Strong communications skills, both oral and written * Ability to communicate effectively with customers, vendors and other employees of the organization without assistance * Ability to lift up to 50 pounds * MS Office Applications (Excel, PowerPoint, Word, Outlook) * Carry out supervisory responsibilities in accordance with the organization’s policies and applicable laws. Responsibilities include training employees; assigning and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. * Team player demonstrating METUS core values including a desire to win together, deliver excellence, drive sustainability, focus on execution and learn continuously. The base pay range for this position at commencement of employment is expected to be between $35.00 to $48.13 per hour however, base pay offered may vary depending on multiple individualized factors, including market location, job-related knowledge, skills, and experience. The total compensation package for this position may also include other elements, including target bonus plans and discretionary awards. Subject to the terms and conditions of the applicable plans then in effect, eligible employees may enroll in a 401(k) plan, as well as participate in Company-sponsored medical, dental, vision, and basic life insurance plans for the employee and the employee’s eligible dependents. Employees will also receive 80 hours of vacation per year, 56 hours of paid sick leave annually, and 13 paid holidays throughout the calendar year, depending on hire date. Employees may also take up to 12 weeks of paid or unpaid [parental/disability/emergency/etc.] leave, if eligible. ABOUT MITSUBISHI ELECTRIC TRANE HVAC US Formed in 2018, Mitsubishi Electric Trane HVAC US (METUS) is a leading provider of ductless and VRF systems in the United States and Latin America. A 50 percent – 50 percent joint venture between Ingersoll Rand plc and Mitsubishi Electric US, Inc., the company provides innovative products, systems and solutions capable of cooling and heating any application from a home to a large commercial building. METUS is a leading marketer of Zoned Comfort Solutions® and Variable Refrigerant Flow (VRF) air-conditioning and heating technology. Systems sold by the joint venture include a wide variety of technologically advanced products designed to deliver superior efficiency, comfort and control. The family of brands supported by METUS includes: Mitsubishi Electric Cooling & Heating, Trane® / Mitsubishi Electric and American Standard® Heating & Air Conditioning Mitsubishi Electric. More information is available at . We offer an excellent compensation and benefits package including 401(K). In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. We are an equal employment opportunity employer. All employment decisions are made without regard to race, color, religion, sex, pregnancy, breastfeeding or related medical condition, national origin, ancestry, citizenship, age, marital status, sexual orientation, gender identity, gender expression, domestic partnership, physical disability, mental disability, medical condition, genetic characteristic or information, military or veteran status or other legally protected status (except when one of these criteria is a legally permissible bona fide occupational qualification). The Company will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the Company, or (c) consistent with the Company’s legal duty to furnish information. Click here to view the EEO is The Law Poster and the supplement . Applicants with a disability who need assistance with the application process may contact Human Resources by email at or by calling 714.229.3813.