Aviation administration jobs in Inglewood, CaliforniaCreate job alerts

Through your training, you will develop the skills and experience to enjoy a civilian career with the Federal Aviation Administration, the National Aeronautics and Space Administration, or the National Weather Service. Must meet citizenship requirements (see NATIONALGUARD. Ask your Army National Gua

• Job Identification 115501, • Job Category Operations, • Posting Date 01/22/2026, 09:13 PM, • Locations 3000 W Lomita Blvd., Torrance, CA, 90505, US (On-site), • Job Schedule Full time General Summary: Personnel are directly involved in the inspection of product in the in-process and final inspection areas. The incumbent will use precision inspection tools and equipment, manufacturing drawings (blueprints), and procedures/instructions in their activities to ensure acceptance of product to specifications and requirements. Incumbent must know and perform all other inspections including; MRB inspection, receiving inspection, and final inspection. Specific Responsibilities: * Must be able to read and interpret work instructions, routers, blueprints, drawings and specifications * Prepare inspection documentation as required by work instructions * Ability to create, update, and populate inspection reports that correlate to associated drawings * Must be able to communicate with multiple departments including Engineering, Manufacturing, Planning, etc. * Train new employees in inspection positions as required * Perform Dimensional Inspection of all characteristics of manufactured products * Perform 1st Article inspection using appropriate drawings or specifications to verify part acceptability * Must be familiar with First Article requirements per AS9102 * Evaluate MRB (Material Review Board) disposition for accuracy and acceptability * Active involvement in process improvement initiatives, for example audit preparation, 5S, and Continuous Improvement * Comply with all safety policies, procedure, and practices. Report all unsafe activities to supervisor and/or Human Resources * Participate in proactive team effort to achieve departmental and company goals * Perform other duties as assigned * Routine duties are performed with minimal supervision * Prioritize and handle multiple tasks simultaneously , Basic Qualifications: * Minimum 3+ suggested years of total quality experience in manufacturing or relevant aerospace industry experience • Employee must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position. Be familiar with First Article requirements per AS9102, AS9100 * Understanding of Federal Aviation Administration requirements and impacts Benefits/Salary: The position includes competitive wages and a comprehensive benefits package available day one of hire, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. Howmet Aerospace curates a strong working environment through opportunities for career progression, community engagement activities, and flexible schedules contingent upon role and location. The salary range for this position is $21-$30. , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email

• Job Identification 116463, • Job Category Supply Chain, • Posting Date 03/05/2026, 03:50 PM, • Locations 3000 W Lomita Blvd., Torrance, CA, 90505, US (On-site), • Job Schedule Full time, • LinkedIn Recruiter Tag #LI-SH2 General Summary: The Sr. Procurement Operations Manager will oversee the purchase of activities, manage supplier relationships, and ensure efficient procurement processes to support organizational goals. Assigned areas of focus may include: systems, procurement operations, commodity management interfaces, materials, logistics, contract management, supplier management and contract administration. Job Duties and Responsibilities: • Lead and manage the procurement team; provide training material and feedback to direct reports as needed, • Performs and manages day-to-day data collection, implementation, supplier improvement and process improvement within Howmet and across the interface between Howmet and its suppliers in order to achieve effective competitive supply chains, • Redesigns as assigned and/or facilitates changes in procurement operations to enable creation of transactional center-ready work, through process improvements, • Identifies transactional improvement initiatives that can be driven through commodity management and supports their achievement, • Promotes communication across the organization to identify and drive toward common policies and best practices to achieve cost reductions, • Develop and maintain relationships with suppliers, negotiate contracts, and ensure compliance with contractual obligations., • Ensure compliance with company policies, procurement regulations, and legal requirements, while educating staff on procurement processes and best practices. Skills • Strong financial analysis skills, • Process oriented; familiar with Continuous Improvement methodology, • Excellent written and verbal communication skills; able to interface with Senior Management, • Strong problem solving skills, • Understanding of risk management, • Bachelor's degree in business administration, Supply Chain Management, and/or a related field required, • Minimum of 7 years' experience in procurement, sourcing, or supply chain management is required, with a proven track record in strategic sourcing and supplier management, • Minimum of 2 years' experience of leading a team with direct reports, • Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position, • This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items Preferred Qualifications • Master's degree or relevant certifications (CPM, APICS, CPIM, P.E.), • Experience with MRP/ERP business systems (Oracle preferred), • Experience within an aerospace, aviation, or automotive manufacturing environment., • Strong organizational skills, ability to manage multiple large projects and interact with all organization levels, • Experience in identifying and executing an optimized supply chain, including raw material, machining, material processing, inspection and logistics, • Technical knowledge in Aerospace Commodities (Machined components, forgings, castings, raw materials, etc.), • Strong proficiency with MS Office (Excel, PowerPoint, Word, Outlook) and related computer skills Additional Requirements: • Must be able to work on site in Torrance, California. Remote work not considered. Benefits/Salary: The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. Howmet Aerospace curates a strong working environment through opportunities for career progression, community engagement activities, and flexible schedules contingent upon role and location. The salary range for this position is $140k-$180k. , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email

FSB is a full-service Architecture and Engineering firm built on nearly 80 years of design excellence, technical innovation, and community impact. We're always on the lookout for architects who see beyond the expected - professionals who understand how thoughtful design can transform lives and elevate everyday experiences. We're growing and currently seeking mid-level Architects and Design Professionals in Los Angeles, CA with 5+ years of experience to join our collaborative studios. Whether you're driven by civic impact, aviation precision, or design for mission-critical environments, FSB offers the opportunity to work across a wide spectrum of projects that matter. What sets us apart is our deep commitment to cross-discipline collaboration. At FSB, architects work shoulder to shoulder with engineers, interior designers, and technical experts to shape solutions that are both visionary and buildable. If you're passionate about architecture that serves people and community - and you're ready to grow with a team that values both purpose and performance - we invite you to apply. • Collaborate on the design and documentation of a variety of project types including aviation, education, civic, tribal, commercial, and federal facilities., • Produce drawings, specifications, diagrams, 3D models, and reports that align with project goals., • Apply building codes, ADA, and zoning regulations to develop functional, compliant design solutions., • Participate in client meetings, design reviews, and team coordination efforts., • Coordinate with engineers, consultants, and internal team members to deliver integrated project outcomes., • Support QA/QC efforts and construction administration activities, including submittal reviews and site observations., • Lead portions of project documentation and guide junior staff in design development., • Strong communication and collaboration skills across disciplines and with clients., • Critical thinking and creativity in solving complex design challenges., • Time management and adaptability in a fast-paced, multi-project environment., • Mentorship mindset, with a willingness to guide and support junior team members., • Clear, professional writing and verbal communication skills., • Initiative in identifying solutions and improving workflow efficiencies., • Degree in Architecture or related design field from a NAAB-accredited program., • For licensed Architects: A valid architectural license in applicable state(s)., • For unlicensed professionals: Active pursuit of licensure and strong portfolio required., • 5+ years of experience on diverse architectural projects., • Proficiency in Revit, SketchUp, Adobe Creative Suite, and related design software., • Strong understanding of building codes, documentation standards, and interdisciplinary coordination. The expected salary range for this position is $73,000 to $109,500 USD per year. Actual compensation will be determined based on factors such as experience, education, licensure, skills, internal equity, and location. This role is eligible for a benefits package that may include medical, dental, vision, paid time off, paid holidays, and retirement plan options. Stated benefits are for regular full-time positions. Temporary and part-time roles eligible for limited benefits. At FSB Architects + Engineers, we believe great design comes from great teams. Whether you're a licensed architect or an emerging design leader, we welcome your unique perspective and passion. Join our inclusive community of architects, engineers, and creatives - and help us shape environments that serve people, inspire progress, and stand the test of time. Frankfurt-Short-Bruza Associates, P.C. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status, genetic information, or any other characteristic protected by federal, state, or local laws.

Description The National Airspace Systems Integration Support (NISC) program at Leidos is seeking a Telecommunications Engineering Technician to provide support to the Federal Aviation Administration (FAA) Central Service Area - Engineering Services Group located in El Segundo, CA. The ideal candidate will support the daily operations of the Telecommunications System. This new system will replace outdated infrastructure including radar, software, hardware and telecommunications networks to manage modern travel. Telecommunications Engineering Technician Job Duties Include: • Review FAA databases and provide input and or draft Site Survey Reports (SSR)., • Conduct site surveys to provide input and/or draft Site Survey Reports., • Coordinate schedules with SSC, ES, and vendor personnel., • Draft Project Risk Plans (PRP) and Operational Risk Management Plans (ORMP)., • Generate and/or update drawings, sketches, and artifacts., • Draft project plans for site preparation activities., • Coordinate scheduled outages with SSC, Air Traffic and Operations personnel., • Develop transition plans., • Resolve schedule conflicts., • Accompany unbadged personnel at facilities., • Work with LECs on schedules., • Develop briefings/information/reports on District status., • Work with other Districts/SSC on interstate service flows, transitions, cutovers, planning, etc., • Support District POC and SSCs with day-to-day work activities., • Review and provide comments on vendor Site Specific Implementation Plans (SSIP). Telecommunications Engineering Technician Required Qualifications: • Bachelor’s degree in Electronics Engineering and 4 to 8 years of relevant experience OR a Master's degree and 2 to 6 years. Additional experience may be substituted/considered/accepted in lieu of degree., • Ability to travel 75-100%., • Ability to obtain a Public Trust Security Clearance Suitability (To be eligible for Public Trust Security Clearance, one must be either a U.S. Citizen OR a U.S. Permanent Resident/Green Card holder who has resided in the U.S.A for the past 3 years of the past 5 years consecutively with no breaks)., • Proficiency in MS Office Suites. Desired Qualifications: • 2+ years of experience working with Telco systems performing Network Troubleshooting., • Proficient working with AutoCAD or similar tools., • Knowledge of National Electric Code (NEC), National Fire Protection Assoc (NFPA) standards, National Airspace System Equipment Tower., • Knowledge of OSHA and general construction and electrical safety standards., • Knowledge of NAS facilities such as ASR, ATCT, VOR, ARSR, RCAG. Leidos is a Fortune 500™ company aimed at embracing and solving some of the world’s most pressing challenges through science and technology. If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. March 27, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $73,450.00 - $132,775.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Responsibilities Howmet Fastening Systems (HFS) is seeking a Quality Inspector III for our Torrance, CA location. HFS is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment. General Summary: Personnel are directly involved in the inspection of product in the in-process and final inspection areas. The incumbent will use precision inspection tools and equipment, manufacturing drawings (blueprints), and procedures/instructions in their activities to ensure acceptance of product to specifications and requirements. Incumbent must know and perform all other inspections including; MRB inspection, receiving inspection, and final inspection. Specific Responsibilities: \n • Must be able to read and interpret work instructions, routers, blueprints, drawings and specifications\n, • Prepare inspection documentation as required by work instructions\n, • Ability to create, update, and populate inspection reports that correlate to associated drawings\n, • Must be able to communicate with multiple departments including Engineering, Manufacturing, Planning, etc.\n, • Train new employees in inspection positions as required\n, • Perform Dimensional Inspection of all characteristics of manufactured products\n, • Perform 1st Article inspection using appropriate drawings or specifications to verify part acceptability\n, • Must be familiar with First Article requirements per AS9102\n, • Evaluate MRB (Material Review Board) disposition for accuracy and acceptability\n, • Active involvement in process improvement initiatives, for example audit preparation, 5S, and Continuous Improvement\n, • Comply with all safety policies, procedure, and practices. Report all unsafe activities to supervisor and/or Human Resources\n, • Participate in proactive team effort to achieve departmental and company goals\n, • Perform other duties as assigned\n, • Routine duties are performed with minimal supervision\n, • Prioritize and handle multiple tasks simultaneously\n\n Qualifications Basic Qualifications: \n • Minimum 3+ suggested years of total quality experience in manufacturing or relevant aerospace industry experience\n, • Employee must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.\n, • Be familiar with First Article requirements per AS9102, AS9100\n The position includes competitive wages and a comprehensive benefits package available day one of hire, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. Howmet Aerospace curates a strong working environment through opportunities for career progression, community engagement activities, and flexible schedules contingent upon role and location. The salary range for this position is $21-$30. About Us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at . Follow: LinkedIn, Twitter, Instagram, Facebook, and YouTube. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email [email protected]

Description The National Airspace Systems Integration Support (NISC) program at Leidos is seeking a Telecommunications Engineering Technician to provide support to the Federal Aviation Administration (FAA) Central Service Area - Engineering Services Group located in El Segundo, CA. The ideal candidate will support the daily operations of the Telecommunications System. This new system will replace outdated infrastructure including radar, software, hardware and telecommunications networks to manage modern travel. Telecommunications Engineering Technician Job Duties Include: • Review FAA databases and provide input and or draft Site Survey Reports (SSR)., • Conduct site surveys to provide input and/or draft Site Survey Reports., • Coordinate schedules with SSC, ES, and vendor personnel., • Draft Project Risk Plans (PRP) and Operational Risk Management Plans (ORMP)., • Generate and/or update drawings, sketches, and artifacts., • Draft project plans for site preparation activities., • Coordinate scheduled outages with SSC, Air Traffic and Operations personnel., • Develop transition plans., • Resolve schedule conflicts., • Accompany unbadged personnel at facilities., • Work with LECs on schedules., • Develop briefings/information/reports on District status., • Work with other Districts/SSC on interstate service flows, transitions, cutovers, planning, etc., • Support District POC and SSCs with day-to-day work activities., • Review and provide comments on vendor Site Specific Implementation Plans (SSIP). Telecommunications Engineering Technician Required Qualifications: • Bachelor's degree in Electronics Engineering and 4 to 8 years of relevant experience OR a Master's degree and 2 to 6 years. Additional experience may be substituted/considered/accepted in lieu of degree., • Ability to travel 75-100%., • Ability to obtain a Public Trust Security Clearance Suitability (To be eligible for Public Trust Security Clearance, one must be either a U.S. Citizen OR a U.S. Permanent Resident/Green Card holder who has resided in the U.S.A for the past 3 years of the past 5 years consecutively with no breaks)., • Proficiency in MS Office Suites. Desired Qualifications: • 2+ years of experience working with Telco systems performing Network Troubleshooting., • Proficient working with AutoCAD or similar tools., • Knowledge of National Electric Code (NEC), National Fire Protection Assoc (NFPA) standards, National Airspace System Equipment Tower., • Knowledge of OSHA and general construction and electrical safety standards., • Knowledge of NAS facilities such as ASR, ATCT, VOR, ARSR, RCAG. Leidos is a Fortune 500 company aimed at embracing and solving some of the world's most pressing challenges through science and technology. If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo - because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 - and moving faster than anyone else dares. March 27, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $73,450.00 - $132,775.00 The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos' name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system - never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Description Looking for an opportunity to make an impact? At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers' success. We empower our teams, contribute to our communities, and operate sustainable. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. If this sounds like the kind of environment where you can thrive, keep reading! The Digital Modernization Sector brings together our digital transformation and IT programs, allowing us to better serve our customers through scale and repeatability. (Group Profile/Link to Group page) - ___ Your Next Great Adventure Awaits! Leidos is seeking an Electronics Engineer to join the National Airspace System Integration Support Contract (NISC IV) Team. This position will support the Federal Aviation Administration (FAA) Los Angeles Communications Engineering Center in El Segundo, CA. Primary Responsibilities: * The NISC IV program at Leidos is seeking Electronics Engineers to work in the Federal Aviation Administration (FAA) Regional Office in El Segundo, CA. * The Electronics Engineers will provide electronics engineering support to the FAA Los Angeles Communications Engineering Center with project engineering, management and planning for Brand New Air Traffic Control Systems (BNATCS) program related projects such as NEXCOM Radios, Air-to-Ground Protocol Converter and Airport Cable Loop, and other National Airspace System (NAS) modernization projects. Routine tasks may include: * Provide electronics engineering support for various Brand New Air Traffic Control System (BNATCS) related electronics projects and other NAS modernization projects throughout the FAA Western Service Area (WSA). * Provide engineering system design packages for installation including communications equipment, radar automation equipment, control and monitoring equipment, and weather communication equipment. * Prepare transition plans, testing plans, and training plans, and coordinate the implementation of transition plan elements with all affected stakeholders. * Assist in preparing Draft project scope agreements and project schedules. * Analyze project business and feasibility components from an engineering perspective and provide recommendations. * Prepare engineering risk assessments, and provide recommendations and proposals of actions or improvements to mitigate potential risks resulting from site, facility, and project/program changes. Please Note: Must be able to work onsite, El Segundo, CA. Required Qualifications: * Electrical and/or Electronic Engineering degree and 4+ years of prior relevant experience OR Master's with 2+ years of prior relevant experience. Additional years of relevant experience may be accepted / considered in lieu of degree. * Systems engineering experience integrating electronics components/systems together. * 4+ years' work experience in electrical and/or electronic engineering. * Ability to obtain a Public Trust Security Clearance Suitability (To be eligible for Public Trust Security Clearance, one must be either a U.S. Citizen OR a U.S. Permanent Resident/Green Card holder who has resided in the U.S.A for the past 3 years of the past 5 years consecutively with no breaks). Preferred Qualifications: * Familiarity with FAA and the National Airspace System (NAS). Please Note: The program budget salary for this role could fall anywhere between $105,000 to $125,000 with a slight wiggle room (no guarantees) based on relevant experience and assessment. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo - because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 - and moving faster than anyone else dares. February 11, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $87,100.00 - $157,450.00 The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos' name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system - never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Oversee Quarterhorse's transition from remotely piloted system to a fully autonomous system to meet program objectives. Federal Aviation Administration transport pilot rating or military equivalent. Military or civilian flight test experience, or test pilot school graduate.

Job DescriptionDescriptionAs a Quality Engineer (Kick Stage) at Impulse, you will own the connection between design intent, manufacturing execution, and flight performance for the Helios Kick Stage and supporting hardware. You will work hands-on with technicians, manufacturing engineers, and design teams to prevent defects before they occur, rapidly diagnose failures, and continuously improve hardware reliability across spacecraft builds. Responsibilities • Support Helios Kick Stage, Composites, Propulsion, and Welding sub-teams at Impulse, • Partner with design, manufacturing, and integration teams to ensure hardware is built reliably and repeatably from prototype through production, • Support early development test and build campaigns to characterize hardware performance, material properties, and design decisions, • Identify, investigate, and eliminate build defects through structured root cause analysis and corrective actions, • Evaluate cross-discipline kick stage vehicle requirements (propulsion, structures, avionics, etc.) to ensure component and system-level requirements align, • Develop inspection, acceptance, and quality control processes aligned with hardware reliability requirements, • Support hardware integration, test, and environmental campaigns by diagnosing anomalies and driving resolution to closure, • Provide design-for-reliability and manufacturability feedback during design reviews and build planning, • Develop and implement MRP/ERP improvements for improved hardware handling, trace, data collection, and overall reliability, • Develop and implement build quality metrics to heighten awareness and to improve quality landscape over time, • Audit production floor processes against process requirements, • Identify requirement gaps and write specifications to fill those gaps, • Implement projects to improve manufacturing reliability, • Own training and certification of elevated sign-off privileges for processes, • Bachelor’s degree in Mechanical Engineering, Aerospace Engineering, Manufacturing Engineering, or related field, • 3+ years of experience in hardware manufacturing, aerospace, automotive, or high-reliability systems, • Demonstrated experience supporting production builds, integration, or test of primary structures and/or complex mechanical or electromechanical systems, • 4+ years of demonstrated build reliability experience with spacecraft, launch vehicles, aviation, robotics, or defense hardware, • Familiarity with AS9100, ISO 9001, or similar quality systems (practical application preferred over documentation focus), • Demonstrated experience with reliability engineering concepts (FMEA, reliability growth, Weibull analysis), • Demonstrated background working closely with technicians and production teams, • Demonstrated experience supporting rapid development or prototype-to-production transitions Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Who Are We? FDH Aero is a trusted global supply chain solutions partner for aerospace and defense companies, helping to shape the industry by simplifying the supply chain. With over 60 years serving as a leading independent industry partner, FDH specializes in hardware, electrical, consumables and expendables, licensed products, and value-added services for global OEM and aftermarket customers. FDH is headquartered in Commerce, California, and has operations across the Americas, EMEA and APAC. FDH Aero – named a Best Places to Work in Aviation in 2024 – has locations in 14 countries across the globe, with more than 1,500 best-in-industry employees and over 650,000 square feet of inventory space. FDH is headquartered in Commerce, California, and has operations across the Americas, EMEA and APAC. FDH Aero – named a Best Places to Work in Aviation in 2024 – has locations in 14 countries across the globe, with more than 1,500 best-in-industry employees and over 650,000 square feet of inventory space. Why Work Here? At FDH Aero, we understand that the strength of our brand comes from our people. We invest in driven, diverse and experienced professionals who are naturally curious, courageous and motivated towards action. We value tempering confidence with humility, and a mission that always starts with service-first. Our values guide everything we do: We Are Service First - We act with agility and intelligence to solve our partner’s most pressing needs. We safeguard our trusted relationships by communicating with clarity and unmatched follow through. We Are Respectful - We behave with dignity, fairness, and acceptance. We thrive by prioritizing empathy, humility, and connection to our collective community. We are Amplifiers - We invest in driven, diverse and experienced professionals, businesses and partners. We fuel the entrepreneurial spirit by providing autonomy, authority and a clear mission. We Are Open-Minded - We communicate with intention, curiosity, and diversity of thought. By actively contributing with courage and candor, we challenge the status quo and innovate together. We Are Accountable - We own responsibility for our outcomes. We set expectations, embrace critique, and empower every employee to take immediate actions on challenges they encounter. We Value Our People - That’s why we offer competitive benefits, including medical, dental, vision, Flexible Spending Accounts (FSA), 401k matching, and wellness programs. We invest in training, mentorship, and career development to empower our employees to reach their full potential. Our commitment to culture and excellence has earned us recognition as one of Aviation Business News' Best Places to Work in Aviation. As a team member at FDH Aero you are trusted to deliver, to innovate, and to drive next-generation solutions for tomorrow’s supply chain demands. Ready to make an impact? We proudly pursue top talent with a diverse and global set of experiences and backgrounds. We Are Looking For The Senior Indirect Tax Analyst is responsible for managing the preparation and review of direct and indirect tax filings, ensure accurate tax accounting and reporting, perform technical tax research, and contribute to strategic tax initiatives across U.S. and international jurisdictions. The ideal candidate will have strong technical tax expertise, sound professional judgment, and the ability to collaborate cross‑functionally. What You'll Do (Responsibilities) • Manage direct and indirect tax filings, ensuring accurate and timely preparation and submission, • Maintain schedules related to deferred tax assets, intangible assets, tax payments, and tax notices, • Perform month-end review and reconciliation of tax accounts to ensure accurate tax reporting and proper financial statement presentation, • Maintain and manage the U.S. tax filing calendar to ensure timely submissions across jurisdictions, • Support tax audits and regulatory inquiries, including working with local tax authorities and external advisors, • Review indirect tax filings across multiple jurisdictions including United States, United Kingdom, Canada, and others, • Respond to indirect tax questions from customers and vendors as they arise, • Assist with other tax initiatives and support strategic tax optimization projects, • Promote tax awareness across the organization by providing training and guidance to internal stakeholders and collaborating with external tax advisors, • Stay current on tax legislation, regulatory changes, and industry trends, • Perform other duties as assigned What You Bring (Qualifications & Skills): • Bachelor’s degree in accounting, Finance, or a related field; a master’s in taxation, • 5 or more years of corporate tax experience, preferably in a large multinational corporation or public accounting firm with a focus on global tax matters, • CPA Certification is preferred, • Strong understanding of U.S. federal, state, local tax laws and regulations, • Experience with process automation and global tax technology solutions, • Ability to work effectively both independently and within a cross-functional global team, • Strong interpersonal skills to interact with diverse cross-functional teams and external global partners, • High level of integrity and confidentiality in handling sensitive tax information, • Strong understanding of U.S. federal, state, local, and international tax laws and regulations, • Experience with tax provisions under ASC 740 and strong knowledge of GAAP principles, • Proficiency in global tax preparation software and advanced Excel skills, • Ability to conduct tax research using tools, • Excellent analytical, organizational, and communication skills, • Strong attention to detail and the ability to manage multiple global tax tasks and deadlines Special Requirements: • U.S. Citizen, U.S. Permanent Resident (Green Card holder) or asylee/refugee status as defined by 8 U.S.C. 1324b(a)(3) required., • ITAR requirement FDH Aero is an Equal Opportunity Employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability status, protected veteran status, or any other characteristic protected by law.

Job DescriptionDescription: Who we are: Advanced Air, LLC is an innovative, service-oriented aviation company headquartered in Hawthorne, California. We were founded in 2005 by our President, Levi Stockton, as an FAA approved, Part 135, On-Demand Air Carrier focused on superlative aircraft management and on demand charter. Today Advanced Air, LLC, operates in both scheduled and on-demand service, and has a diversified portfolio of flying services in turboprop aircraft, business jets and regional passenger jets. Serving more than 12 communities in the southwestern United States, Advanced Air has a deep commitment to operational excellence and metered, sustainable growth. Our successful growth is driven by our adherence to our core values of: safety, security, teamwork and reliability. We are in this business for the long run and take a disciplined, thoughtful approach to growth opportunities. About the role and about you: This position is for Second in Command (SIC) of a turbo-prop Pilatus PC-12 based out of Hawthorne, CA and requires a strong ability to multi-task, making high level complex decisions while completing a variety of aviation related tasks. The flying for this position will support the Advanced Air Essential Air Service communities and on-demand charter. The main Objective is to provide Advanced Air travelers a world class experience in a fleet of Pilatus PC-12’s. While holding up to the standards of Advanced Air, LLC flight operations, interacting with all charter customers, aircraft owners, and airline passenger travelers. What you will do: • Assist the pilot-in-command during all phases of flight in accordance with operating policies and procedures, • Perform a visual pre-flight (walk-around) inspection prior to each flight, • Perform a visual post-flight (walk-around) after each flight, • Assume primary responsibility for the safety of the passengers, crewmembers, cargo, and the aircraft should the pilot-in-command become incapacitated or unable to perform his/her duties., • Have primary operational responsibility for successfully completing the customer service portions of each leg as outlined in the policies and procedures manual., • Review thoroughly and brief the pilot-in-command specifically on all customer service items including, but not limited to passenger pick up, passenger drop off, refueling, customs, private hangar pick up/drop off, private hangar communications requirements, and passenger catering., • Comply with all Federal Aviation Regulations, Company Operations Manual, Operations Specifications, Standard Operating Procedures, and Company Policies and Procedures, • INITIAL NEW-HIRE Consists of all ground training curriculum segments in their entirety, with the aircraft ground being specific to the type(s) of aircraft in which the airman is to qualify. The flight training will cover all required events and maneuvers with none being waived by the qualified flight instructor., • Update flight and duty records, determine eligibility for the next flight assignment and ensure any aircraft maintenance discrepancies are reported to the Captain and reported in accordance with operating policy and procedure What we are looking for: • High school diploma or GED., • 1000 hours total time, 500 PIC, 25 hours multi-engine fixed wing, Commercial Airplane Multi Engine Land, • 500 hours cross-country flight time; 100 hours night time, 75 hours instrumental flight time of which 50 were in actual flight, • CFI, CFII, MEI Certificates, preferred but not required., • Successfully pass oral/written exam administered by FAA approved Advanced Air, LLC Check Airman, or a representative of the Administrator within the preceding 12 calendar months as required by FAR 135.293(a), • Successfully complete competency check administered in the type of airplane within the preceding 12 calendar months conducted by a FAA approved Advanced Air, LLC Check Airman or an FAA Inspector, as required by FAR 135.293(b), • Must have completed the 6-month IFR proficiency check given by an FAA inspector or a FAA approved Advanced Air, LLC Check Airman (FAR 135.297), • Demonstrated enroute, arrival and departure procedures by completing an enroute check (FAR 135.299) with an FAA inspector or a FAA approved Advanced Air, LLC Check Airmen, • Must be Knowledge of Federal Aviation Administration rules and regulations., • Must be Knowledge of aircraft maintenance procedures., • Must have Customer/Client Focus, • Must be able to have ability to multi-task, • Must be proficient in MS Office suite (Word, Excel, and Outlook), • Must be able to work flexible schedule, including nights, weekends and holidays., • Must be able to pass FAA drug/alcohol screening, background checks and submit to random drug test when required, • Maintain a current medical certificate as required by the company, • Ability to work in confined spaces, • Ability to manipulate, push, pull, and lift heavy objects in excess of 150 lbs., • Ability to climb onto and off of an airplane wing as part of the preflight, post flight, or during an over wing emergency exit, • Digital dexterity for aircraft preflight and post flight, • Ability to execute flights of up to 4.5 hours up to a total flight time of 10 hours per day during a 14 hour duty period What you can expect: • SICs will a compensated at an annual salary rate of $55,000.00., • Training contract will be required for 12 months from date of completion of initial training, • Flight Crews will work a mixed schedule of Days ON and Days OFF that will generate 10 days off a month, • Flight Crews average 15 flying days a month and 8 to 12 nights away from base as the schedule allows. Pilots bid days off based on seniority 14 days in advance, which will generate a schedule of 10 meaningful hard days off a month. There are 13 schedule periods in a calendar year. Days that are listed as “On” flight crews will be available to work for Advanced Air. Days that do not have assigned flying will have a set On Call period to them. On Call periods will require flight crew to be within approximate two hours of the airport and in a fit to fly state. Days Off, the pilot will not be expected to be available for Advanced Air Why you should work with us: We can tell you all about how great we are, but you probably want to know what is in it for you, so we have compiled a list of our standout benefits: • 401k plan with dollar for dollar employer match up to 4%, • 100% Company Paid Health Insurance including Medical, Dental, Vision and $15,000 in life insurance for yourself, • KCM for your personal travel, • Day Off Pay at 200% ($200 per HDO flown), • Hourly Bonus for Flight hours over 65 in a month ($50 p/h 65+), • $2.45 Per Diem pay for all hours associated with Flight Duty May incur exposure to constant or intermittent sounds of a pitch or level significant enough to cause marked distraction or possible hearing loss while performing operations on the airfield ramp. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Environment fluctuates between work in extreme temperatures, including cold and heat. Environment is also exposed to work in altitudes higher than sea level. All pilots will train in a crew environment emphasizing checklist usage and crew standardization for normal, abnormal and emergency procedures.

Job DescriptionCompany Description Founded in 1952 and formerly known as Heery International Inc., the firm operates throughout the United States as part of Turner & Townsend. It specializes in project and program management for public sector organizations, with industry-leading experts in corporate, cultural, healthcare, justice, sports, K-12 education, higher education, aviation and government facilities. Recognized for service excellence by a broad spectrum of professional organizations and industry publications, the talented multidisciplinary team at Turner & Townsend Heery exceeds client expectations — adding value, best practice and expertise at every turn. The team's unique client-centric culture is integrated into each project and reflects a passion for the built environment and staying true to the client’s vision. Job Description Turner & Townsend Heery is seeking a highly experienced Senior Construction Project Manager to serve as the primary client-facing representative for a large, complex healthcare capital program in Southern California. This individual will lead project management efforts from early planning and programming through design and construction. The SPM will serve as the prime point of contact for the owner and will direct an integrated project management team supporting a major institutional development. The ideal candidate brings deep experience in healthcare facilities, complex regulatory environments, and alternative delivery methods such as Progressive Design-Build. Key Responsibilities Executive Leadership & Primary Contact • Serve as the lead representative and primary point of contact to the client, • Direct and manage the consultant project management team, • Integrate seamlessly with owner staff and stakeholders, • Support development of project scope, budget validation, and delivery strategy, • Assist in preparation of alternative delivery procurement documents, • Oversee design development to ensure compliance with regulatory, code, and owner requirements, • Review consultant deliverables for quality, constructability, and completeness, • Provide executive-level oversight of cost controls, change management, and forecasting, • Monitor project schedule performance and risk mitigation, • Ensure regulatory compliance and quality assurance protocols, • Oversee substantial completion, documentation turnover, and warranty administration, • Ensure financial reconciliation and project reporting requirements are satisfied Preferred Experience • Experience working with large public institutions or higher education clients, • Progressive Design Build experience, • Familiarity with “best value” selection processes, • Experience implementing Lean construction management principles, • Experience in highly regulated healthcare construction environments Key Competencies • Executive presence and strong client communication skills, • Strategic thinking and risk management capability, • Strong contract and procurement knowledge, • Ability to manage multiple stakeholders in complex institutional environments, • Ability to scale staffing resources as project needs evolveQualifications Required Credentials Candidate must meet one of the following: • Licensed Architect (California preferred), • Registered Professional Engineer (California preferred), • Bachelor’s degree in Construction Management and Certified Construction Manager (CCM) Minimum Qualifications • 15+ years of progressively responsible experience in project and construction management, • Demonstrated leadership of large capital projects exceeding $100M construction value, • Direct experience delivering licensed healthcare facilities (ambulatory, medical office, or acute care environments preferred), • Experience with Progressive Design-Build and traditional Design-Build delivery methods, • Experience managing fast-track, multi-phase construction programs, • Proven ability to manage complex project budgets, schedules, scope, and procurement strategies, • Working knowledge of California Public Contract Code and public-sector procurement processes, • Familiarity with healthcare regulatory authorities (e.g., state-level health facility oversight agencies), • Strong understanding of:, • California Building Code, • ADA compliance, • Fire and life-safety standards, • Environmental review processes (CEQA experience preferred) Additional Information The salary range for this full-time role is $170k-$220k per year. Ranges are determined by role and level and represent a good faith effort to provide a fair and equitable salary. This range is a reflection of base salary only, not of a total compensation package. Please note Turner & Townsend reserves the right to pay more or less than the posted range, depending on candidate’s experience and qualifications. Qualified candidates with arrest or conviction records will be considered for employment in accordance with LA County ordinance and CA law. Our inspired people share our vision and mission. We provide a great place to work, where each person has the opportunity and voice to affect change. We want our people to succeed both in work and life. To support this we promote a healthy, productive and flexible working environment that respects work-life balance. Turner & Townsend is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees and actively encourage applications from all sectors of the community. Please find out more about us at Turner & Townsend does not accept any speculative or unsolicited CV’s that have been sent to our internal recruitment team or hiring managers from agencies outside of our preferred supplier list or that have not followed due process. Any speculative or unsolicited CV’s will be treated as a direct application. All your information will be kept confidential according to EEO guidelines. #LI-JS3 Join our social media conversations for more information about Turner & Townsend and our exciting future projects: Twitter Instagram LinkedIn It is strictly against Turner & Townsend policy for candidates to pay any fee in relation to our recruitment process. No recruitment agency working with Turner & Townsend will ask candidates to pay a fee at any time. Any unsolicited resumes/CVs submitted through our website or to Turner & Townsend personal e-mail accounts, are considered property of Turner & Townsend and are not subject to payment of agency fees. In order to be an authorised Recruitment Agency/Search Firm for Turner & Townsend, there must be a formal written agreement in place and the agency must be invited, by the Recruitment Team, to submit candidates for review.

Job DescriptionDescriptionAs a Quality Engineer at Impulse, you will own the connection between design intent, manufacturing execution, and flight performance. You will work hands-on with technicians, manufacturing engineers, and design teams to prevent defects before they occur, rapidly diagnose failures, and continuously improve hardware reliability across spacecraft builds. Responsibilities • Partner with design, manufacturing, and integration teams to ensure spacecraft hardware is built reliably and repeatably from prototype through production, • Identify, investigate, and eliminate build defects through structured root cause analysis and corrective actions, • Develop risk-based inspection, acceptance, and quality control processes aligned with mission reliability requirements, • Support hardware integration, test, and environmental campaigns by diagnosing anomalies and driving resolution to closure, • Provide design-for-reliability and manufacturability feedback during design reviews and build planning, • Monitor hardware and supplier quality performance, using production and test data to drive continuous improvement Minimum Qualifications • Bachelor’s degree in Mechanical Engineering, Aerospace Engineering, Manufacturing Engineering, or related field, • 3+ years of experience in hardware manufacturing, aerospace, automotive, or high-reliability systems, • Demonstrated experience supporting production builds, integration, or test of complex mechanical or electromechanical systems, • Strong problem-solving skills with demonstrated root cause analysis experience Preferred Skills and Experience • 4+ years of demonstrated build reliability experience with spacecraft, launch vehicles, aviation, robotics, or defense hardware, • Familiarity with AS9100, ISO 9001, or similar quality systems (practical application preferred over documentation focus), • Demonstrated experience with reliability engineering concepts (FMEA, reliability growth, Weibull analysis), • Demonstrated background working closely with technicians and production teams, • Demonstrated experience supporting rapid development or prototype-to-production transitions Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescriptionAs a Quality Engineer (Composites) at Impulse, you will own the connection between design intent, manufacturing execution, and flight performance for the composites hardware. You will work hands-on with technicians, manufacturing engineers, and design teams to prevent defects before they occur, rapidly diagnose failures, and continuously improve hardware reliability across spacecraft builds. Responsibilities • Partner with design, manufacturing, and integration teams to ensure hardware is built reliably and repeatably from prototype through production, • Perform closeout inspections, • Support early development test and build campaigns to characterize hardware performance, material properties, and design decisions, • Identify, investigate, and eliminate build defects through structured root cause analysis and corrective actions, • Develop inspection, acceptance, and quality control processes aligned with hardware reliability requirements, • Provide design-for-reliability and manufacturability feedback during design reviews and build planning, • Develop and implement MRP/ERP improvements for improved hardware handling, trace, data collection, and overall reliability, • Develop and implement build quality metrics to heighten awareness and to improve quality landscape over time, • Audit production floor processes against process requirements, • Identify requirement gaps and write specifications to fill those gaps, • Implement projects to improve manufacturing reliability, • Own training and certification of elevated sign-off privileges for processes, • Bachelor’s degree in Mechanical Engineering, Aerospace Engineering, Manufacturing Engineering, or related field, • 3+ years of experience in hardware manufacturing, aerospace, automotive, or high-reliability systems, • Demonstrated experience supporting production builds, integration, or test of primary structures and/or complex mechanical or electromechanical systems, • 4+ years of demonstrated build reliability experience with spacecraft, launch vehicles, aviation, robotics, or defense hardware, • Familiarity with AS9100, ISO 9001, or similar quality systems (practical application preferred over documentation focus), • Demonstrated experience with reliability engineering concepts (FMEA, reliability growth, Weibull analysis), • Demonstrated background working closely with technicians and production teams, • Demonstrated experience supporting rapid development or prototype-to-production transitions, • Technical familiarity with composites materials and manufacturing Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description M.S. Aerospace Inc. (MSA) is an aerospace manufacturer of high strength specialty fasteners, including bolts, screws, studs, and pins. Our products are of the highest quality and very close tolerances. Our products support the US Government, including the ISS, Space Shuttle, and the most demanding defense equipment. We also support the most demanding OEMs in the commercial aviation industry. We offer a competitive benefits package including medical, dental, vision, and bonus. Join one of the fastest-growing aerospace companies by applying now ! Environmental Health and Safety Specialist Department: Human Resources Department/ Area: Manufacturing and Administration Position Summary: We are seeking a qualified and motivated individual to coordinate environmental, health, and safety programs, inspections, training, audits and hazard assessments related to CAL OSHA and environmental requirements in support of established safety policies and practices ensuring the wellbeing of employees, contractors and visitors. What You Will Do: · Works with the Human Resource Manager, General Manager, and Directors to continue to build and sustain a strong safety culture through loss analysis · Interact with all levels of the organization and uphold a positive safety and environmental work environment. · Handle safety related activity and initiatives in a collaborative manner to create a culture of interdependence and to create a high-performance workplace. · Ensure that EHS incidents and significant near misses are communicated appropriately and investigated with corrective actions monitored and tracked to closure. · Communicate and initiate improvements based on trends in audit findings, corrective actions, and best practices. · Ensure compliance to CAL OSHA, LA City/County CUPA, LA County Department of Public Health, SCAQMD and other safety regulations that apply to the facility. · Maintain training records & updates training materials, incident report tracking, and updates facility regulatory programs · Perform timely investigations of incidents identification of root cause and rapid correction · Provide guidance and technical expertise to ensure compliance with EHS regulations. · Perform all other duties as assigned to support manufacturing · Responsible for case management of workers’ comp claims and maintained ongoing communication with claim adjusters and attorney to minimize lost time, claim cost, and attended applicant’s deposition Minimum Qualifications: · At least 1 year of experience with safety or health systems in manufacturing and warehousing environment · At least 1 year of experience with environmental compliances in manufacturing and warehousing environment · Intermediate skills in Microsoft Word, Excel & PowerPoint · Workers' compensation experience. · Good working knowledge of CAL OSHA, LA City/County CUPA, LA County Department of Public Health, and SCAQMD · Strong demonstrated passion for safety, a willingness to learn and be developed in a fast-paced demanding environment · Experience leading training and development initiatives in the field of Environment, Health, or Safety · Experience in project leadership · Demonstrate team orientation; proactively communicate and willing to be flexible to meet business needs. · Excellent interpersonal and communication skills. Preferred Qualifications: · OSHA 40 Hour HAZWOPER Certificate · DOT 10 Hour Hazmat Transportation Certificate · Certification as a Safety Professional · Experience working in and driving continuous improvement · Bi-lingual (Spanish) preferred Reporting Relationships: Reports to General Manager and Human Resource Manager Working Conditions: 80% Manufacturing Environment and 20% Office Environment This job description in no way states or implies that these are the only duties to be performed by this employee. He or she will be required to follow any other instructions and to perform any other duties requested by his or her supervisor. M.S. Aerospace Inc. is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. M.S. Aerospace Inc. will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of Los Angeles Municipal Code, Chapter XVIII, Article 9. M.S. Aerospace Inc. 13928 Balboa Blvd Sylmar, CA 91342. Company DescriptionMSA is a leading manufacturer in the aerospace industry of high-quality specialty fasteners for aerospace, medical and other high performance, applications. M.S. Aerospace, Inc., a leading manufacturer of aerospace products and parts, has the following open degreed/experienced position(s) available in Sylmar, CA: Materials Engineer Evaluates materials and develops machinery and processes to manufacture materials for use in products to meet specialized designs and performance specifications. Performs manufacturing engineering duties such as: read blueprints, use various inspection gages (micrometer, caliper, indicator, comparator) test equipment (microscope, hardness tester, torque tester). Gathers and analyzes information skillfully. Develops alternative solutions as required under the circumstances. Prioritizes and plans work activities making use of time efficiently. Defines and analyzes problems in a timely manner and consistently meets project time deadlines. Performs engineering work related to planning, devising, or adapting methods to improve manufacturing production. Examines equipment, processes, operations, and assembly to determine time or quality revisions and suggests improvements. Responsible for carrying out changes and monitoring operations standards. Analyzes product failure date and laboratory tests results to determine causes of problems and develop solutions. Designs and directs testing or control of processing procedures, monitors material performance and evaluates deterioration. Conducts and supervises tests on raw materials or finished products to ensure their quality. Determines appropriate methods for fabricating and joining materials. Assists and guides technical staff in developing materials for specific uses in products and devices. Will accept a Master's degree or foreign academic equivalent in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Electrical Engineering or related field. 40 hours/week; $99,278.00 - $105,000.00/year Apply on-line w/ ref# at: Reference Number: HS-MSA EEO employer: including race, gender, disability & veteran status. We offer Medical, Dental, Vision, and 401K benefits.MSA is a leading manufacturer in the aerospace industry of high-quality specialty fasteners for aerospace, medical and other high performance, applications.\r\n\r\nM.S. Aerospace, Inc., a leading manufacturer of aerospace products and parts, has the following open degreed/experienced position(s) available in Sylmar, CA:\r\n\r\nMaterials Engineer\r\n\r\nEvaluates materials and develops machinery and processes to manufacture materials for use in products to meet specialized designs and performance specifications. Performs manufacturing engineering duties such as: read blueprints, use various inspection gages (micrometer, caliper, indicator, comparator) test equipment (microscope, hardness tester, torque tester). Gathers and analyzes information skillfully. Develops alternative solutions as required under the circumstances. Prioritizes and plans work activities making use of time efficiently. Defines and analyzes problems in a timely manner and consistently meets project time deadlines. Performs engineering work related to planning, devising, or adapting methods to improve manufacturing production. Examines equipment, processes, operations, and assembly to determine time or quality revisions and suggests improvements. Responsible for carrying out changes and monitoring operations standards. Analyzes product failure date and laboratory tests results to determine causes of problems and develop solutions. Designs and directs testing or control of processing procedures, monitors material performance and evaluates deterioration. Conducts and supervises tests on raw materials or finished products to ensure their quality. Determines appropriate methods for fabricating and joining materials. Assists and guides technical staff in developing materials for specific uses in products and devices.\r\n\r\nWill accept a Master's degree or foreign academic equivalent in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Electrical Engineering or related field.\r\n\r\n40 hours/week; $99,278.00 - $105,000.00/year\r\n\r\nApply on-line w/ ref# at:\r\n Number: HS-MSA\r\nEEO employer: including race, gender, disability & veteran status.\r\n\r\n\r\n\r\nWe offer Medical, Dental, Vision, and 401K benefits.

Job Description Who Are We? FDH Aero is a trusted global supply chain solutions partner for aerospace and defense companies, helping to shape the industry by simplifying the supply chain. With over 60 years serving as a leading independent industry partner, FDH specializes in hardware, electrical, consumables and expendables, licensed products, and value-added services for global OEM and aftermarket customers. FDH is headquartered in Commerce, California, and has operations across the Americas, EMEA and APAC. FDH Aero – named a Best Places to Work in Aviation in 2024 – has locations in 14 countries across the globe, with more than 1,500 best-in-industry employees and over 650,000 square feet of inventory space. FDH is headquartered in Commerce, California, and has operations across the Americas, EMEA and APAC. FDH Aero – named a Best Places to Work in Aviation in 2024 – has locations in 14 countries across the globe, with more than 1,500 best-in-industry employees and over 650,000 square feet of inventory space. Why Work Here? At FDH Aero, we understand that the strength of our brand comes from our people. We invest in driven, diverse and experienced professionals who are naturally curious, courageous and motivated towards action. We value tempering confidence with humility, and a mission that always starts with service-first. Our values guide everything we do: We Are Service First - We act with agility and intelligence to solve our partner’s most pressing needs. We safeguard our trusted relationships by communicating with clarity and unmatched follow through. We Are Respectful - We behave with dignity, fairness, and acceptance. We thrive by prioritizing empathy, humility, and connection to our collective community. We are Amplifiers - We invest in driven, diverse and experienced professionals, businesses and partners. We fuel the entrepreneurial spirit by providing autonomy, authority and a clear mission. We Are Open-Minded - We communicate with intention, curiosity, and diversity of thought. By actively contributing with courage and candor, we challenge the status quo and innovate together. We Are Accountable - We own responsibility for our outcomes. We set expectations, embrace critique, and empower every employee to take immediate actions on challenges they encounter. We Value Our People - That’s why we offer competitive benefits, including medical, dental, vision, Flexible Spending Accounts (FSA), 401k matching, and wellness programs. We invest in training, mentorship, and career development to empower our employees to reach their full potential. Our commitment to culture and excellence has earned us recognition as one of Aviation Business News' Best Places to Work in Aviation. As a team member at FDH Aero you are trusted to deliver, to innovate, and to drive next-generation solutions for tomorrow’s supply chain demands. Ready to make an impact? We proudly pursue top talent with a diverse and global set of experiences and backgrounds. We Are Looking For The Account Manager will thrive in a fast-paced environment. The successful candidate must be comfortable making outgoing calls, qualifying prospects, following up on leads, and closing sales. What You'll Do (Responsibilities) • Receive and process quotes, orders, pricing, availability, shipping costs, etc., • Communicate with customers and process RFQs, POs, Returns, order follow-ups, • Negotiate prices with customers for potential orders, • Effectively communicate with internal departments, • Work closely with outside sales team including quoting, reports and product availability, • Recommend products and services that best fit customer needs, • Review and accurately enter Purchase Orders (Contracts) to ensure customer’s Terms & Conditions, Quality and Customer Specific Requirements, • Be cooperative, positive, and respectful with customers, supervisors, and co-workers, • Pursues open non-conforming submittals for disposition with customer, • Capable of negotiating discounts with customer in order to complete the sale, • Responsible for maintaining export licensing with international customers, • Understanding of product both import/export and working with customs brokers, • Completely read and review purchase orders accurately, comparing information on the purchase order to the quotations to validate order specifics and transfer accurately the full details to sales orders in a timely manner, • Perform other duties as assigned What You Bring (Qualifications & Skills): • High School Diploma required; Bachelor’s Degree preferred, • 2-3 years of inside sales experience in the aerospace industry is preferred, • Proficiency in Quantum is a plus, • Proficiency in Microsoft Office, • Track record of achievement, • Ability to multi-task, prioritize and manage time effectively, • Accurate Data Entry, attention to detail, • Goal-oriented, • Strong Verbal and written competencies, • Ability to work within a team, influencing others, • Strong Work Ethic, • Ability to handle confidential matters, • Ability to work in a fast-paced, deadline-oriented environment, • Team player and ability to motivate the team members, • Excellent verbal & written communication skills Special Requirements: • U.S. Citizen, U.S. Permanent Resident (Green Card holder) or asylee/refugee status as defined by 8 U.S.C. 1324b(a)(3) required., • ITAR requirement FDH Aero is an Equal Opportunity Employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability status, protected veteran status, or any other characteristic protected by law.

Job DescriptionLong Wall Company was created in 2025 to accelerate missile defense technology for the U.S. and our allies. Building on the RS1 and GS0 launch systems, Long Wall develops containerized, mass-producible missile defense systems and offers rapid, low-cost flight testing. We believe that the future of global security and stability require defensive technology that is lower cost, higher performing, better tested, and more broadly distributed than is possible today. Join us. What we look forMission-Driven Problem Solvers. The aerospace frontier demands ingenuity. We want Team members who approach challenges with curiosity, embrace failure as a learning opportunity, and stay focused on delivering the best solution for the mission. Total Ownership. We seek staff and engineers who take full responsibility for contributing to and delivering flight-ready work while recognizing that no one succeeds alone. The best engineers, corporate professionals, and technicians make their teammates better. Knowing that complementary skills create force multiplication and drive mission success. DescriptionWe are looking for an experienced avionics technician (S4 or S5) who is excited about manufacturing development and production hardware for launch vehicles and defense systems. We seek team members who can think critically to improve hardware designs and manufacturing processes, and deliver high quality hardware to our programs. Avionics technicians build and test components and electrical assemblies our launch vehicles and defense systems. Avionics technicians are responsible for a broad range of responsibilities including PCB assembly and rework, electro-mechanical assemblies, sensors/transducers, cable and wire harnessing, final integration, operating thermal chambers, functional testing, and perform software driven tests.Responsibilities: • Assemble PCBs into product chassis and support final vehicle integration by installing electrical sub-assemblies and routing cables and harnesses, • Assemble electro-mechanical components along with the building of circuit boards and small electrical assemblies, • Fabricate high quality, high reliability cable and wire harnesses, • Operate complex automated equipment, including routine inspection, maintenance, and troubleshooting, • Document anomalies and non-conformities and associated rework to quickly return non-conforming product back into normal workflow, • Perform functional testing of built hardware, including setups, instrumentation, test execution, create/upload reports, and teardown, • Ensure lab equipment, tooling and consumables available and maintained to a high standard, • Work closely with manufacturing and test engineers to provide input and develop assembly processes and test procedures, • Assist with the development of production processes for first time production, • Instruct and mentor junior avionics techniciansBasic Minimum Qualifications:, • High School Diploma/GED or Equivalent, • Minimum 5+ years of relevant hands-on technician work experience in aerospace, aviation, military, telecommunications or similar industries. Including demonstrable working knowledge of, but not limited to:, • o PCB, cable harness fabrication, electro-mechanical, mechanical, integration assemblies and prototype developmentPreferred Skills and Other Experience:, • Ability to perform assembly operations including bending, crimping, grasping, pulling, reflowing, sitting, soldering, standing, stooping, stretching, stripping, and torquing, • Proficient usage of a PC; experience with Microsoft Windows, Microsoft Office Suite (Excel, Outlook, Power Point, Word), shop floor management software (ERP) and related programs, • Strong written and verbal communication, and organizational skills, and high level of attention to detail, • Ability to read/interpret and work from controlled technical documentation and processes such as engineering drawings, layout drawings, mechanical drawings, assembly procedures, manufacturing instructions, schematics, and parts lists, • Skills in operating and manipulating automated machinery and various mechanical and electronic hand and power tools requiring manual dexterity with minimal instruction, • Strong emphasis on safety, cleanliness, adherence to corporate policies and standards, a great attitude, and the ability to effectively work with a team, • Ability to rapidly change roles/responsibilities while working in a high-paced, challenging flight production clean room environment, • 1+ years of experience working at a rocket launch facility and supporting launch campaigns, • Associate Degree in electrical discipline., • Manufacture and soldering of electronic components to NASA workmanship standards using IPC-J-STD-001 and/or IPC-A-610 standards, • Manufacture electrical cable and harnesses to IPC-A-620 standard, • Current or past certification for NASA-STD-8739.4, NASA-STD-8739.6, IPC-A-610, IPC-A-620, IPC-J-STD-001 or equivalent, • Knowledge of ANSI S20.20 Electrostatic Discharge (ESD) standard and 5S methodologiesAdditional Requirements:, • Physical effort including carrying, lifting, and pushing moderately heavy materials or equipment (15 to 40 lbs.), • Ability to climb up and down ladders to work at elevated, • Work occasionally performed in an environment requiring exposure to fumes, odors, and noise, • Must be willing to work 50+ hours a week (overtime) including weekends when necessary to support launch and critical project timelines, flexibility required, • Must be willing to travel to other Long Wall sites or customer facilities as necessaryThis is the lowest to highest compensation range we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee’s pay position within the salary range will be based on several factors including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs. In addition to base pay and equity, we offer:· Heavily employer-subsidized medical, dental, and vision insurance plans· Long Wall paid life insurance and LTD coverage· 5% 401k match· Student loan repayment assistance program· Paid parental leave· Family planning assistance program· Long Wall paid financial wellness program· Paid time off for non-exempt employees and flexible vacation policy for exempt employeesITAR RequirementThis position requires access to information protected under US export control laws, including the International Traffic in Arms Regulations and/or the Export Administration Regulations. As such, US person status (including US citizens, U.S. permanent residents, individuals granted U.S. asylum status, or individuals admitted in U.S. refugee status) is a required qualification for this position. Equal Opportunity EmployerWe are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, protected veteran status, disability, genetics, or citizenship status (when otherwise legally authorized to work and access export-controlled data) and will not be discriminated against on the basis of such characteristics or any other status protected by the laws or regulations in the locations where we operate. We encourage applicants of all ages.

Job Description Role Overview: As an Electrical Engineer II, you will own the end-to-end design of complex electrical systems, from initial concept and architecture through hardware bring-up and testing. Joining a growing organization, you'll have the opportunity to guide technical decisions and tackle mission-critical challenges across projects in multiple industries, including commercial space, aviation, renewable energy, and medical devices. This role is ideal for engineers who are passionate about technical ownership, cross-functional collaboration, and building systems that matter. What You Will Do: • Support the design, architecture, and development of electronic systems, • Work closely with internal engineering teams and external customers to build solutions across multiple industries, • Take ownership from schematic capture and PCB layout through hardware bring-up and troubleshooting, • Bachelor's degree in Electrical Engineering, Computer Engineering, Physics, or a related field, • 3+ years of experience with end-to-end electronics design, including requirements generation, schematic design, board layout, design verification and acceptance testing, • Ability to collaborate effectively with an interdisciplinary team, • Demonstrated passion for engineering, • Strong problem-solving skills and initiative to overcome technical challenges, • Excellent written and verbal technical communication skills; ability to explain design decisions and component selections, • Master's Degree in Electrical Engineering, Computer Engineering, Systems Engineering, Physics, or a related field, • Experience in a team-based design and build project (e.g., Formula SAE, Solar Car, CubeSat, etc.), • Experience designing PCBs for high-reliability applications (e.g., aerospace, automotive, medical), • Compensation range of $132,070-$165,090 + equity incentive plan, • Flexible work hours and work from home policy, • 100% employer-paid health insurance (Medical, Dental, Vision) for employees + 50% dependent coverage, • Unlimited paid time off policy, 11x paid company holidays, 12x paid sick days, • 401(k) retirement account and employer matching (Safe Harbor 4%), • Generous paid parental leave, • Relocation assistance available if 50+ miles away from the office, • Electric Vehicle (EV) charging ports Second Order Effects practices a "first principles approach" to technical problems. We break down complex challenges to their most fundamental components. This enables us to find solutions across industries, use cases, and engineering functions. As an engineering consulting firm, we focus on solving the right problems and building teams to take them on. Going beyond just resolving tough issues, we want to answer impactful questions. Additional Requirements: • Applicant must be willing to work 40 hours a week on-site in El Segundo, California, USA, • Applicant must be eligible to work on export controlled projects If you don't meet 100% of the preferred skills and experience, we encourage you to still apply! Second Order Effects is proud to be an Equal Opportunity Employer; employment with SOE is governed on the basis of excellence and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability, or any other legally protected status.

Job DescriptionCompany Description Founded in 1952 and formerly known as Heery International Inc., the firm operates throughout the United States as part of Turner & Townsend. It specializes in project and program management for public sector organizations, with industry-leading experts in corporate, cultural, healthcare, justice, sports, K-12 education, higher education, aviation and government facilities. Recognized for service excellence by a broad spectrum of professional organizations and industry publications, the talented multidisciplinary team at Turner & Townsend Heery exceeds client expectations — adding value, best practice and expertise at every turn. The team's unique client-centric culture is integrated into each project and reflects a passion for the built environment and staying true to the client’s vision. Job Description Turner & Townsend Heery is seeking a Design Manager responsible for overseeing medium to large sized school projects in Los Angeles. Essential Duties and Responsibilities: • Plans, organizes, and directs the design activities for the School Upgrade Program and critical repair projects. Functions as the lead design professional in the Design Department providing quality review, implementation of policy and procedures and interface and coordinates with the Division of State Architects (DSA), • Manages, develops, and coordinates the District’s design process for the Facilities Planning and Development Division to ensure that plans are within functional program, budgetary, environmental and legal requirements, • Manages multiple projects through interaction with Architects, consultants, and District personnel from project conception, through draft to final review, approval, and handoff to Project Execution, • Oversees the building design process to ensure compliance with LAUSD’s standards and guidelines for the District by working with design professionals and various District administrators to ensure that new and modernized structures meet both educational and building standards requirements, • Establishes and follows a process to identify and select the architectural firm best suited for each project based on the firms’ qualifications and ability to meet performance standards, • Provides Architects with clear and consistent direction with regard to goals and objectives, standards, site, schedule, and budget for each project, • Establishes and follows an effective and efficient design review process to ensure that the design meets the overall goals and objectives for the project, provides maximum value for dollars budgeted, and are appropriate and enduring to meet the functional needs of the District, the local community, and the environment, • Ensures that decisions are made in a timely manner, • Ensures that all steps within the project are documented and that the documentation meets legal requirements, • Reviews design changes submitted to ensure project remains within budget, • Recommends architectural firm assignment from an established list of pre-qualified architectural firms, • Participates in community relations and outreach programs to create understanding and acceptance of District building projects design within the community, • Coordinates with a host of professional staff who support the design function for the District, • Develops continuing education opportunities, i.e., seminars and workshops, to learn and share-up-to-date information on working with architects and contractors, • Coordinates project activities with other District organizational branches and departments such as the Office of the Environmental Health and Safety, A/E Design Services, Maintenance and Operations, School Occupancy Transitional Unit, Asbestos Technical Unit and Local Districts, • Performs other duties as assignedQualifications, • Minimum 10 years full time paid professional experience managing the facilities design, or the planning and coordination of capital projects that includes the overall design, contract administration, cost estimating, and scheduling activities., • A valid Certificate of Registration as an Architect by the California State Architectural Board or Professional Engineer by the State Board for Professional Engineers and Land Surveyors., • DSA Experience. Additional Information The salary range for this full-time role is $120k-$155k per year. Ranges are determined by role and level and represent a good faith effort to provide a fair and equitable salary. This range is a reflection of base salary only, not of a total compensation package. Please note Turner & Townsend reserves the right to pay more or less than the posted range, depending on candidate’s experience and qualifications. Qualified candidates with arrest or conviction records will be considered for employment in accordance with LA County ordinance and CA law. Our inspired people share our vision and mission. We provide a great place to work, where each person has the opportunity and voice to affect change. We want our people to succeed both in work and life. To support this we promote a healthy, productive and flexible working environment that respects work-life balance. Turner & Townsend is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees and actively encourage applications from all sectors of the community. Please find out more about us at Turner & Townsend does not accept any speculative or unsolicited CV’s that have been sent to our internal recruitment team or hiring managers from agencies outside of our preferred supplier list or that have not followed due process. Any speculative or unsolicited CV’s will be treated as a direct application. All your information will be kept confidential according to EEO guidelines. #LI-JS3 Join our social media conversations for more information about Turner & Townsend and our exciting future projects: Twitter Instagram LinkedIn It is strictly against Turner & Townsend policy for candidates to pay any fee in relation to our recruitment process. No recruitment agency working with Turner & Townsend will ask candidates to pay a fee at any time. Any unsolicited resumes/CVs submitted through our website or to Turner & Townsend personal e-mail accounts, are considered property of Turner & Townsend and are not subject to payment of agency fees. In order to be an authorised Recruitment Agency/Search Firm for Turner & Townsend, there must be a formal written agreement in place and the agency must be invited, by the Recruitment Team, to submit candidates for review.

Job DescriptionCompany Description Founded in 1952 and formerly known as Heery International Inc., the firm operates throughout the United States as part of Turner & Townsend. It specializes in project and program management for public sector organizations, with industry-leading experts in corporate, cultural, healthcare, justice, sports, K-12 education, higher education, aviation and government facilities. Recognized for service excellence by a broad spectrum of professional organizations and industry publications, the talented multidisciplinary team at Turner & Townsend Heery exceeds client expectations — adding value, best practice and expertise at every turn. The team's unique client-centric culture is integrated into each project and reflects a passion for the built environment and staying true to the client’s vision. Job Description Turner & Townsend Heery is seeking a Senior Construction Project Manager for K-12 projects in Los Angeles. All of the duties associated with the Senior Project Manager, plus specialized experience and/or expertise required for the successful delivery of education projects. Oversees the fulfilment of LAUSD's overarching organizational goals by coordinating activities and interdependencies between multiple project teams with a focus on the strategy and delivery of the overarching program on behalf of LAUSD. Monitors key performance indicators for project and overall program progress, resources, budget, risks and opportunities. Collaborates and communicates with LAUSD leadership and project team leaders to review progress and tackle issues as they arise. Responsibilities: • Conduct periodic site visits to monitor the progress of construction., • Review status of work completed during the period covered., • Review that work is generally proceeding in a good and workmanlike manner and in general accordance with the approved drawings and specifications., • Review contractors' direct cost payment requisitions and budget status., • Review of subcontracts, bonds/subcontractor default insurance., • Review of change orders., • Review of Developer's monthly job cost reports and opine on adequacy of contingency., • Review of construction and disbursement schedules., • Review of lien waiver and other documentation submitted by the Developer., • Prepare project status reports and recommend the release of construction funds., • Review contract drawings and specifications and opine for completeness and general compliance with commonly accepted architectural /engineering best practices., • Analyze the Developer's direct and indirect cost budget including cost estimate back-up and coordinate with the Cost Advisory group performing parameter estimates, spot quantity take-offs and review of supporting documentation submitted by the Developer, contractor and subcontractors., • Review and make relevant comments concerning the terms of the construction agreement, the submitted subcontracts, architectural and engineering design agreements, building loan agreement as well as review both Contractor and Architect's qualification statements., • Review and comment on construction and disbursement schedules as well as other submitted documents including but not limited to:, • Zoning approvals, • Certified surveys, • Building permits and approvals, • Utility company approval letters, • Soil and foundation engineering reports, • Designer's certification of code and ADA compliance., • Prepare Construction Risk Assessment Reports., • SOX control responsibilities may be part of this role, which are to be adhered to where applicable., • Other duties as assigned. Qualifications • Excellent written and verbal communication skills., • Strong organizational and analytical skills., • Ability to provide efficient, timely, reliable and courteous service to customers., • Ability to effectively present information., • Requires in-depth knowledge of financial terms and principles., • Ability to calculate complex figures., • Ability to forecast and prepare budgets., • Conducts financial/business analysis including the preparation of reports., • Ability to solve advanced problems and deal with a variety of options in complex situations., • Requires expert level analytical and quantitative skills with proven experience in developing strategic solutions for a growing matrix-based multi-industry sales environment., • Draws upon the analysis of others and makes recommendations that have a direct impact on the company., • Intermediate skills with Microsoft Office Suite., • Ability to read and understand architectural drawings., • Knowledge in MS Project, leases, contracts, and construction practices., • Knowledge of the entitlement/permitting process and construction delivery methods and agreements., • Familiarity with construction best practices, general building codes, and various building types and systems., • Fifteen (15) years full time paid professional experience in Construction and/or a combination of Project and Construction Management of Public/Educational Facility Construction., • Five (5) of the fifteen (15) years should have full responsibility for coordinating complex projects with construction values in excess of $20M., • Bachelor's degree in Architecture, Engineering, Construction Management, or related field., • Education and K-12 experience is preferred, • Relevant Professional Licensure &/or Certifications are strongly preferred. Certifications may include PE, RA, CCM, AAAE, LEED, PMP, AICP, etc. Additional Information The salary range for this full-time role is $140k-$175k per year. Ranges are determined by role and level and represent a good faith effort to provide a fair and equitable salary. This range is a reflection of base salary only, not of a total compensation package. Please note Turner & Townsend reserves the right to pay more or less than the posted range, depending on candidate’s experience and qualifications. *Qualified candidates with arrest or conviction records will be considered for employment in accordance with LA County ordinance and CA law. Turner & Townsend is an Affirmative Action and Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Equal Employment Opportunity Posters If you’d like to view a copy of the company’s affirmative action plan, please email . If you are an individual with a disability and would like to request a reasonable accommodation as part of the employment selection process, please contact the Human Resources Department at 713-457-9400 or . This telephone line and email address is reserved solely for job seekers with disabilities requesting accessibility assistance or an accommodation in the job application process. Please do not call about the status of your job application if you do not require accessibility assistance or an accommodation. Messages left for other purposes, such as following up on an application or non-disability related technical issues, will not receive a response. #LI-JS3 Join our social media conversations for more information about Turner & Townsend and our exciting future projects: Twitter Instagram LinkedIn It is strictly against Turner & Townsend policy for candidates to pay any fee in relation to our recruitment process. No recruitment agency working with Turner & Townsend will ask candidates to pay a fee at any time. Any unsolicited resumes/CVs submitted through our website or to Turner & Townsend personal e-mail accounts, are considered property of Turner & Townsend and are not subject to payment of agency fees. In order to be an authorised Recruitment Agency/Search Firm for Turner & Townsend, there must be a formal written agreement in place and the agency must be invited, by the Recruitment Team, to submit candidates for review.

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Purpose We are seeking a highly-skilled and experienced Senior Program Manager to oversee Divergent's aerospace and defense (A&D) efforts. As one of the early hires in the A&D division, this individual will own defense programs focused on deploying Divergent's technology on new and legacy defense programs. This individual will also lead programs that focus on the expansion of Divergent's capabilities enabling the utilization of DAPS™ for a broader set of defense applications. The ideal candidate will have a strong technical background in aerospace structures, with a particular emphasis on aerial defense systems such as unmanned aerial systems or missiles. The Senior/Principal Program Manager will be responsible for leading programs with defense primes and Department of Defense (DoD) stakeholders to execute Divergent's programs efficiently and effectively. The Role • Manage all aspects of aerospace and defense programs, from inception to completion, ensuring on-time delivery of program deliverables and within cost, schedule, and performance requirements, • Lead cross-functional team by providing strategic technical guidance and programmatic constraints on cross-functional teams consisting of engineering, manufacturing, and customer personnel, • Set framework and analysis parameters with internal engineering teams and customer teams to characterize programmatic, technical, and risk trades, • Build and utilize Divergent program management tools, systems, and templates to draft proposals, write-up statements of work, and track program performance (cost, schedule, and performance), • Monitor program performance against established metrics and milestones, identifying areas for improvement and implementing corrective actions as necessary, • Formulate program strategy across a portfolio of customers, identifying new development opportunities, technology risks, and partnerships that Divergent should focus on, • Develop and maintain relationships with defense primes, subcontractors, and DoD stakeholders to facilitate program success and build new contracting opportunitiesBasic Qualifications, • Active Secret Clearance desired; Top Secret Clearance preferred., • Bachelor's degree in Aerospace Engineering, Mechanical Engineering, or related field, • Minimum of 10 years of experience in program management within the aerospace and defense industry, • Strong technical background in aerospace structures programs, including familiarity with basic structural analysis tools such as finite element analysis (FEA), • Knowledge of additive manufacturing applications and robotic assembly systems, • Excellent communication and interpersonal skills, with the ability to effectively engage and influence both internal and external stakeholders, • Proven track record of successfully managing complex programs with multiple stakeholders and dependencies, • Experience with DoD acquisition cycles and federal acquisition regulations (FAR), • Experience supporting analysis and completing documentations for airworthiness certifications. Experience engaging directly with DoD airworthiness stakeholders such as the Air Force Test Center (AFTC) or the Federal Aviation Administration (FAA), • Experience with fast iteration hardware prototyping programs Preferred Qualifications, • Advanced degree in degree in Aerospace Engineering, Mechanical Engineering, or related field, • Previous experience in technical leadership positions such as Chief Engineer or Integrated Product Team (IPT) Lead is preferred, • Senior / S05: $134,640 - $185,130, • Lead / S06: $155,540 - $213,840, • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job DescriptionSalary: $125,000 - $140,000 Relocation available for eligible candidates Helinet is a diversified helicopter service provider located in Van Nuys, California. We are a dynamic, fast-paced company that provides services to a wide range of markets, including VIP charter, air medical, electronic news gathering, motion picture production, utility, and public safety. Throughout the industry and around the world, we are known for an unparalleled quality of service, an outstanding safety record, and a highly respected staff of aviation professionals. Chief Inspector will assist, supervise, and direct all personnel assigned to the inspection department. DUTIES: • Ascertains that all inspections are properly performed on all completed work and that the proper inspection records, reports, and forms used by the maintenance department are properly executed on a timely basis, prior to releasing aircraft for return to service, • Coordinates with the FAA Certificate Holding District Office and other Federal Aviation Administration offices regarding Quality Assurance issues, • Oversees the proper tagging and identification of all parts and components, • Provides for continuity of inspection responsibility, assuring completion of required inspection when personnel shift or assignment changes occur, • Evaluates and processes changes in inspection and maintenance and avionics policies and procedures, • Ensures contractors who perform work on aircraft or appliances are in compliance with applicable FARs and Company policies and procedures, • Oversees the final acceptance of all incoming raw material, including new parts and supplies and the airworthiness of articles on which work has been performed outside Company maintenance by contract, • Assures the proper execution of FAA Form 337 and/or a maintenance release when required REQUIREMENTS: • A&P Certified Mechanic with IA, • Prior experience working for an FAA Part 145 Rotorcraft Repair Station, • Prior experience in coordinating with the FAA Certificate Holding District Office and other Federal Aviation Administration offices regarding Quality Assurance issues, • Experienced in submitting reports of failures, malfunctions or defects of an article in accordance with 14 CFR Part 145.221, • High School Diploma, • Proficient in computer systems (Microsoft Office), • Very strong organizational skills, • Extremely detail-oriented and maximizes time, • Must be a team player that collaborates well with others Bonus: Sign-on bonus $8,000 for successful candidates. Relocation assistance available for eligible candidates. Benefits: • Competitive pay, • Health, dental, vision, • 401k, • Cell phone reimbursement, • Employee assistance program, • Life Insurance, • Disability Income Benefits, • Flexible Spending Account, • Telemedicine, • Aflac, • Housing Assistance, • Travel reimbursement Helinet is an Equal Opportunity Employer. We believe that no one should be discriminated against for any reason. All Helinet employment decisions shall be made without regard to age, race, creed, color, religion, sex (including pregnancy and related conditions), national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by federal, state, or local law to include Los Angeles Fair Chance Initiative for Hiring (LCIHO)LCIHO Link. Helinet is also committed to providing veteran employment opportunities to members of the armed forces.

Job Description Job Summary: The Customer Service Manager will communicate and develop a business relationship with the customer’s management (Aviation Department Manager, Vice President, Chief Pilot, Pilots) to ensure aircraft reliability, cost of operations and product satisfaction that meets or exceeds expectations. Communications include customer visits, interfacing at company-sponsored events, telephone, email, etc. Total customer satisfaction with Dassault Falcon Jet (DFJ) is the primary goal of this position Principal Duties: Maintain liaison with customer’s management team Assist customer operations/maintenance of their aircraft as safely and economically as possible in accordance with standard industry practice; maintain manufacturer’s recommendations and government regulations Present “Welcome to the Family” presentations to all new Falcon operators or as requested Provide thorough briefing to customers on all administration functions that may affect relationship with DFJ. This includes and is not limited to spares/pre-owned/new aircraft warranty, spares terms and conditions policy, DOA, TBO, NFF and service report status Visits/contact with the customer facility include Chief Pilots, Directors, Chief of Maintenance, Parts Managers, Warranty Administrators and Accounting. Topics discussed during these visits shall include, but not be limited to, technical/reliability concerns, service bulletin status, maintenance budget recommendations, pilot operational issues, APRO/MAIC capabilities/benefits and ASC program/its benefits Track current location, phone numbers and main points of contact of customers for DFJ customer master file Ensure customer is aware/satisfied with all Dassault approved training organizations for both maintenance and pilot training; record, track and resolve any customer training issues Discuss and demonstrate benefits and cost of various technical publications/programs (CATS, FIELD 4, FIELD BASIC, OCIP, CREDDO, PETAL and PILOT) Carefully prepare and submit all reports (CCRs, contact reports, market/technical surveys, expense reports, incident reports) in a timely manner Be accountable for customer open invoice disputes, overdue CDIs, DFJ tech pub sales, spares parts volume, service related work accomplished at our Authorized Service Centers, open customer issues and total time to resolve Be familiar with/utilize Front Line Empowerment Policy Communicate on company email system for messages, download/upload files Adhere to “no pass on” policy of Field Service Track current locations/addresses of aircraft and operators for DFJ customer master files Non-Principal Duties: Participate in Falcon aircraft presentation flights to prospective customers/operators with the Regional Sales Manager and Field Service Representative Participate in Field Service Department meetings Attend initial/refresher maintenance training at DFJ approved training organization for airframe, engine and APU Assist customers to troubleshoot, analyze and recommend correction action for aircraft discrepancies when requested by operator Be familiar with various aircraft inspections cycles and ensure customer receives its maximum benefits When based at a remote field office, assist in maintaining the office in a professional manner; clean, organize, obtain supplies, update the technical library, and file with attention to quality and timeliness Attend/participate in local aircraft organizations (WAMA, PAMA, NBAA, AOPA, etc.) Provide on-site warranty adjudication when needed to help resolve open issues within guidelines and limits established by Director of Spares for DFJ. Encourage customer to complete warranty/service reports Aid customer in forecasting their spare parts/service bulletins and ground support requirements Minimum Qualifications: Associate’s degree or equivalent experience Demonstrated leadership skills and prior success establishing a relationship with customer’s management Five (5) to seven (7) years of business jet maintenance experience, Falcon aircraft preferred Excellent communications skills (written and verbal) Excellent presentation skills required Intermediate proficiency in PC, MS Office, database retrieval, etc. A&P license Flexibility of personal schedules Demonstrated strong customer service orientation Driver’s license Passport/proper travel documents required Additional Desired Qualifications: Pilot’s license Aircraft spare parts sales/warranty administration experience Teaching/instructor experience IA Bachelor’s degree Chief of Maintenance/management position and responsibilities experience preferred Working Conditions: Office environment 40-75% travel Compensation and Benefits The compensation for this position typically falls between $100,000 and $140,000 per year. This position is not eligible for overtime. Note, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift. Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more. We are committed to finding the best, brightest and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us.

Job Description Company Overview: We are seeking a highly experienced Senior Construction Manager to oversee major aviation infrastructure projects at Los Angeles International Airport (LAX). This role requires deep familiarity with complex, active airport environments and the ability to lead projects within one of the busiest airports in the world. Position Summary: The Senior Construction Manager will lead large-scale airside and landside projects at LAX, ensuring safe, compliant, and efficient project delivery within an active operating airport. The ideal candidate brings extensive aviation construction experience, strong cost control expertise, and a proven track record managing change orders in highly regulated environments. Key Responsibilities: · Manage all phases of aviation construction projects at LAX, from pre-construction through closeout · Coordinate closely with Los Angeles World Airports (LAWA), FAA representatives, contractors, and airport stakeholders · Ensure compliance with FAA regulations, LAWA standards, and strict airport operational constraints · Develop and manage project budgets, schedules, and risk mitigation plans · Lead cost control efforts, including detailed review, negotiation, and administration of change orders · Oversee safety, quality control, and security requirements specific to active airport construction · Provide executive-level reporting and stakeholder communication Qualifications: · Minimum 15 years of construction management experience, with substantial aviation project experience · Direct experience working at LAX or other large hub airports strongly preferred · Demonstrated expertise in cost management and change order negotiation · Strong understanding of airside/landside coordination and working in secure, high-traffic environments · Bachelor’s degree in Construction Management, Engineering, or related field preferred · Excellent leadership, communication, and stakeholder management skills Preferred Certifications: · PMP, CCM, or equivalent · OSHA 30-hour certification · Experience with LAWA project procedures and documentation systems Company DescriptionFounded in 1988 and privately held, TEC is most experienced and reputable African American contractors. For more than 30 years, TEC has performed general contracting, program management and construction management on private and public works projects, ranging from highway expansions, new school facilities, major airport tenant improvements and expansion projects to extensive hospital tenant improvement projects. TEC's mission is lasting relationships with clients by exceeding their expectations, gaining trust through exceptional performance, delivering projects within budget and on time, every time. TEC is an Equal Opportunity Employer (M/F/D/V) with a strong commitment to environmental awareness and a drug-free workplace.Founded in 1988 and privately held, TEC is most experienced and reputable African American contractors. For more than 30 years, TEC has performed general contracting, program management and construction management on private and public works projects, ranging from highway expansions, new school facilities, major airport tenant improvements and expansion projects to extensive hospital tenant improvement projects.\r\n \r\nTEC's mission is lasting relationships with clients by exceeding their expectations, gaining trust through exceptional performance, delivering projects within budget and on time, every time.\r\n\r\nTEC is an Equal Opportunity Employer (M/F/D/V) with a strong commitment to environmental awareness and a drug-free workplace.