Blueprint jobs in Rochester, New YorkCreate job alerts

Job Description Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning QS:9000, ISO:9002, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol-free working environment. General Job Description: Sets up and operates horizontal and vertical CNC mills. Requires only general supervision. Minimum Qualifications: • Job knowledge through suitable education or prior work experience, • Able to read blueprints, • 4th axis experience, • Programming a must, • Know correct speeds and feeds, tooling, design and manufacturing of fixtures Specific Duties: • Program and Set up horizontal & vertical CNC mills, • Make proper set-up to give rigidity to work piece, • Work with materials such as cast iron, steel, bronze, brass and other non-ferrous materials, • Hold tolerance of .003 inch, • Manufacture and inspect blueprint, • Upkeep daily preventative maintenance log Physical Demands: • Must be able to lift up to 50 lbs. regularly, • Requires frequent bending, stooping, squatting, pushing and pulling of parts and part containers, • May be required to stand for long periods of time, • May involve some repetitive motions, • Due to the open environment of the warehouse, must be able to work in various weather and temperature conditions to include extreme heat, humidity and cold This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Job Description Job Summary: Working from given instructions, will load programs into the controller, review the program and do intermediate setup of machine tools through first piece inspection approval. Essential Duties and Responsibilities: • Accountable for manufacturing complex parts and machine maintenance., • Able to control product quality during production runs using calipers, dial bore gages, micrometers, etc., • Measure and work with tight tolerance in accordance with control plan and blueprint., • Good working knowledge of proper machine operation and safety., • Manufacture product with tight tolerance in accordance with CAD models and blueprints., • May work with prototypes for potential future work., • Must be able to develop and machine basic fixtures with or without prints., • Keeps work area clean and organized., • Must be able to change tools and offsets. Additional Responsibilities: • When requested, may work on special projects and various related assignments., • May be required to edit programs at machine., • May be requested to instruct other personnel on the machine operation., • May be required to work in various areas of operations when necessary., • Performs other related duties and assignments as required. Physical Demands and Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. Must be able to stand for long periods of time. The employee is occasionally required to reach with hands and arms. The employee is required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 50 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from moderate to loud. Education, Skills and Experience: • Minimum of 5 years experience in a machine shop environment., • Knowledgeable on set-ups, lathes and mills., • Understand GD&T and shop math., • Ability to read and understand cad-cam software., • Familiar with G and M codes., • Good communication skills., • Must be a good team player. This job description in no way states or implies that these are the only duties to be performed by this employee. He/she will be required to follow any other instructions and to perform any other responsible duties as requested by his/her supervisor. Syntec Optics is an Equal Opportunity/Affirmative Action Employer. Applicants are free to apply without regard to race, color, religion, sex/gender, gender identity, sexual orientation, marital status, pregnancy, genetic information, citizenship status, national origin, age, disability or veteran status or any other Federal or State legally protected classes. Read our EOE Policy Statement.

Job DescriptionPEKO Precision Products: We Make Products That Matter PEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: CNC Machinist Your Role: The CNC Machinist is responsible for the setup and operation of a variety of CNC machines, including horizontal and vertical mills. You will set up, operate, and manufacture products according to blueprint specifications and customer requirements. Responsibilities Included • Setup and operate various CNC mill machines, adhering to the blueprint specifications, • Conduct first piece inspection to ensure the part is free of defects and ready for the next stage of production., • Comply with all aspects of 5S, • Assist with other duties as assigned by the Manager.Reports To: Machining Manager Qualifications Basic Qualifications: • Minimum education level of High School, GED, or its equivalent, • 3+ years experience in a machine shop environment, • 3+ years experience working with mill machines Preferred Qualifications:, • Associates in Precision Machining, • Experience with multi-axis CNC milling with FANUC controls, MAZAK, or similar, • Experience in horizontal mill machinesWork Authorization: US Persons PEKO Perks:, • Competitive Total Rewards, • Tuition Reimbursement (IRS Allowable pre-tax Max), • 401K, Medical, Dental, Vision, • Flexible Spending & Health Savings Accounts, • Life, Short and Long-Term Disability, • Recognition Awards & Discretionary BenefitsOur Core Values:, • Compassion: We care about our talented and loyal PEKO family., • Safety: We are committed to providing a safe, clean, and positive workplace., • Integrity: We believe in transparency, honesty, and respect for all stakeholders., • Agility: We are dedicated to maintaining an agile and financially prudent organization., • Endurance: We foster the belief that PEKO people are resilient problem-solvers impacting the future., • Get a glimpse of why we are #PEKOProud: #PEKOProud - YouTubeOther:, • This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice., • For more available opportunities at PEKO, please visit our website:Jobs & Career Opportunities | Rochester NY | PEKO Precision Products A reasonable estimate of the compensation range for this position is $20.00 - $32.00 per hour. The wage range for this role considers a wide range of factors when making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational requirements. PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. Powered by JazzHR BzLCMX8FIp

Job Description The CNC Set-Up Machinist is responsible for programming, setting up, and machining complete parts from detailed technical drawings using the most efficient processes and equipment available. This role requires strong technical expertise, independent problem-solving ability, and ownership of the machining process from print to finished part. This is a higher-skill role within the CNC Turning department and requires hands-on experience with program edits, setups, and process optimization. Compensation • $30 - $34 / hr Shift: • 1st Shift: 7:30 AM – 4:00 PM, • 2nd Shift: 3:45 PM – 12:30 AM (+10% shift differential), • Overtime: Available (including Saturdays) Responsibilities • Program and edit CNC lathe programs as needed, • Perform full machine setups including tooling selection and workholding, • Load parts, operate controls, and verify first-piece quality, • Read and interpret detailed blueprints and customer specifications, • Perform in-process inspections using precision measuring instruments, • Optimize machining processes for efficiency and quality, • Support engineers and customers during design and production stages, • Coach and assist operators when needed, • Maintain strict adherence to quality and safety standards, • Work independently with minimal supervision Requirements Qualifications • Minimum 3+ years CNC setup and programming experience (Turning / Lathe required), • Strong blueprint reading and shop math skills, • Proficient with measurement instruments (micrometers, calipers, indicators, etc.), • Thorough understanding of machining theory and shop procedures, • Ability to troubleshoot and solve problems independently, • High school diploma or equivalent preferred Benefits Benefits • Medical, dental, and vision insurance, • 401(k), • Paid time off and paid holidays, • Stable, full-time employment

Job DescriptionDescription: This is a B-Shift Position starting at 4:00 PM and includes a 10% premium on base rate Please apply on our website www.pgmcorp.com Position Summary Operates CNC (Computer Numerically Controlled) lathes and/or mills to machine metallic and nonmetallic workpieces to produce precision machined parts at acceptable levels of efficiency and quality on both new and existing production processes. Operates machining centers on repetitive production work involving skill and dexterity in the operating. Attention is required to prevent damaged product or damage to machine center. Making necessary minor machine adjustments to ensure satisfactory production. Inspect work for obvious defects and dimensional integrity Requirements: Essential Duties and Responsibilities In addition to adhering to the policies of the company outlined in the PGM Employee Handbook, an individual servicing in this capacity shall consistently be able to: This is a B-Shift Position starting at 4:00 PM and includes a 10% premium on base rate • Operate CNC mills and/or lathes, running new and existing production jobs of moderate complexity without assistance unless unusual problems occur. Must be able to make minor adjustments when necessary., • Monitor perishable tooling inventory for each assigned job., • Perform all required inspection duties to maintain acceptable quality levels., • Inform supervisor of any problems associated with equipment, processes or procedures and offer ideas or possible solutions., • Complete job-related paperwork accurately and completely which includes: expedite sheets, move tickets, and job cards., • Perform routine preventative maintenance, as required, including but not limited to daily preventative machine maintenance logs., • Analyzes blueprint and specifications manual for requirements such as dimensions and tolerances, tooling instructions on fixturing, gauging, print rev. level, and cutting instruments., • Computes unspecified dimensions and necessary machine settings as required by the work order., • Positions and secures tools in holders, lifts work piece manually or with hoist, and secures work piece in chuck or appropriate fixture., • Starts machine, turns or initiates software program and engages feed. Directs coolant flow to tool and work piece., • Observes material removal step(s) to verify process integrity and detect excessive wear or malfunction., • Verifies conformance of machined work pieces to specification tolerances., • Plots dimensional data on control charts and collects SPC Data. Initiates proper procedural action if control chart warning limits are identified or out-of-tolerance conditions are experienced., • Basic and Advanced Vantage training, • Follow company policies as outlined in the employee handbook and values, • Other duties may be assigned. Supervisory Responsibilities This job has no supervisory responsibilities. Education, Training and/or Experience High school diploma or general education degree (GED); and one to five years related experience and/or training or equivalent combination of education and experience. Internal Training Requirements • Company Practices & Policies, • Lock Out/Tag Out Video, • Company Benefits Orientation, • Personal Protection Equipment, • Mission, Vision & Values Training, • Right-to-Know Training, • Values Based Leadership, • Traveler Sign-Off, • Bloodborne Pathogen, • Hazardous Communication, • Fire Extinguisher Safety This is a B-Shift Position starting at 4:00 PM and includes a 10% premium on base rate

Job Description About Us Come work with the best! At Maine Drilling & Blasting (MD&B) we work like owners because we are owners. As a majority employee-owned ESOP Company, we work with the unity of family and the determination of business owners. Our standard is to achieve operational excellence at all levels of the organization, whether we are serving internal or external customers. We are fueled by success, because we are personally vested in the outcome. In addition to our employer-contributed Employee Stock Ownership Plan (ESOP) retirement program, we also have a traditional Company matched 401(k), health, dental, vision, life, and disability benefits. About The Opportunity If advancement is what you’re looking for, we offer that also. Our learning and development opportunities are industry leading, and the formula for our success is centered on promotion from within. Intrigued? Read on to learn more about specific opportunities to join our dedicated team. Do you have experience operating heavy construction equipment such as backhoe, skid steer, excavators, or loaders? Do you want to learn the drilling and blasting industry with a stable, growing, majority employee owned company? If you answered YES to these questions, then we want to meet you! Hourly Rate: $20 - $22 per hour, plus stipend for travel! Responsibilities • Ability to perform job specific instruction provided by Superintendents, Blasting Supervisor or Drill Operators., • Individuals must be safety-minded and able to work well in varying weather environments., • Out of town travel and overtime may be required., • Perform daily maintenance activities required for safe, efficient operation of assigned equipment, • Adhere to Company Safety Policies and Procedures, • Ability to learn drill patterns and terminology then execute drill pattern and layout as established by the Blaster Foreman, • Inventory accessories, understand cost of accessories, maintenance drill accessories, • Communicate problems and terrain conditions to the Blaster/Foreman, • Understand the Field Accounting system and accurately complete and submit timely paperwork: drill reports, hole sheets, and a signed timecard, • Physical agility, • Coordinate Supplies with Blaster, • Carry all tools and Supplies, • Participate in meetings as needed: Foreman's, Safety, Job Specific, and Daily Heads-Up, • Complete Driller I training within designated period, • Ability to work unsupervised while maintaining a sense of urgency, • Other duties as assigned About You Qualifications Equipment operating experience is helpful (earth moving construction equipment, farm equipment, timber harvesting equipment, etc.) Valid Driver's License with own transportation Experience as construction laborer Must hold a high level of common sense relative to equipment and machinery operation Mechanical aptitude based on past experience around equipment, motors, hydraulic, electrical systems, desired Must successfully pass ATF screenings Physical Requirements: Ability to perform essential functions of the position Ability to lift 50 – 100 lbs., 30 – 40% of the time Work on uneven and loose surfaces in varying weather conditions Stooping and bending 30-40% of the time Physical agility But honestly, this is not the only blueprint for success at MD&B. Dedication, enthusiasm, hard work, integrity, honesty, and responsibility are key indicators for us in any candidate interested in joining our world class team. Our team members are good communicators, highly competitive (we want to win!), and work together effectively to get the job done! Skeptical about advancement opportunities? Check out these videos: Dante (CST) talks about what it’s like to work at MD&B: https://www.youtube.com/watch?v=zrSWPW4Qbgo Jay (Service Supervisor) talks about his day to day at MD&B: (30) A Day In The Life of an Equipment Service Supervisor - Jay L. - YouTube Dan (CEO) talks about career advancement opportunities: https://www.youtube.com/watch?v=gvloIft9KPY Does this sound like you? If it does, then go ahead and hit that APPLY button because we cannot wait to meet you! Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. 41 CFR 60-1.35(c)

Job DescriptionDescription: Summary: To provide on-site coordination for all phases of DiMarco construction projects, including coordinating subcontractors, material and equipment, ensuring that specifications are being strictly followed, and work is proceeding on schedule and within budget. Superintendent shall be responsible for scheduling, inspections, quality control, and job site safety. Essential Functions / Major Responsibilities of Superintendent: • Schedule subcontractors, consultants, and vendors in critical path to ensure timely completion., • Perform quality control duties and responsibilities regarding the work being performed., • Communicate with project team regarding OCO, RFI’s, and Material Submittals., • Ensure that subcontractor is fully executing and complying with his contracted scope of work., • Coordinate required inspections with local jurisdictions., • Identify conflicts in construction progress and communicate them to project team for resolution., • Maintain daily log of activities on the jobsite., • Walk all areas on project daily to monitor activities and assist in future planning., • Facilitate at foreman, project management and owner meetings., • Issue notices of non-compliance to subcontractors in regards to quality of work or scheduling for safety, health, and environmental quality., • Ensure subcontractor has corrected all deficiencies identified by project team, • Ensure that the job site is always kept in a clean and organized manner., • Perform job progress and completion punch list identification and completion., • Assist in obtaining permits or approval of revisions., • Plan and maintain a submittal log in concert with the project documents. Secondary Functions: • Continuously evaluate and document existing conditions before and during constructions., • Identify areas of work that are in addition to or outside of subcontracted scope., • Opening the jobsite at beginning of the day and securing the jobsite at the end of the day., • Assist in hiring sub-contractor employees Supervisory Responsibility: • Superintendent shall supervise all subcontractors, consultants, and vendors on a daily basis. This supervision shall ensure adequate manpower is available for each task and compliant work performed. This position shall be responsible for monitoring project security personnel. Superintendent shall supervise all Assistant-Superintendents, Project Foremen, Engineers and Skilled Workforce. Knowledge, Skills and Abilities: • Provide direction to and resolve problems amongst various subcontractors and vendors., • Ability to identify deficient work and provide resolution., • Cloud based project management knowledge, Bluebeam, Microsoft office, Asta/Microsoft Project, • Communicate using the following tools: CMiC, telephone, scanning, email, computer, and camera., • Blueprint reading., • Physically lift up to 100 lbs., • Endurance and ability to visit entire job site, including stairs or other elevated structures., • Monitoring jobsite general health and safety., • Customer Service - Manages difficult or emotional customer situations; Responds promptly to customer needs; Solicits customer feedback to improve service; Responds to requests for service and assistance; Meets commitments., • Interpersonal Skills - Focuses on solving conflict, not blaming; Maintains confidentiality; Listens to others without interrupting; Keeps emotions under control; Remains open to others' ideas and tries new things., • Oral Communication - Speaks clearly and persuasively in positive or negative situations; listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings., • Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality., • Quantity - Meets productivity standards; Completes work in timely manner; Strives to increase productivity; Works quickly., • Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly., • Adaptability - Adapts to changes in the work environment; Manages competing demands; Able to deal with frequent change, delays, or unexpected events., • Attendance/Punctuality - Is consistently at work and on time; Ensures work responsibilities are covered when absent; Arrives at meetings and appointments on time., • Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals; Completes tasks on time or notifies appropriate person with an alternate plan., • Initiative - Volunteers readily; Undertakes self-development activities; Seeks increased responsibilities; Takes independent actions and calculated risks; Looks for and takes advantage of opportunities; Asks for and offers help when needed., • Written Communication - Writes clearly and informatively; Edits work for spelling and grammar; Varies writing style to meet needs; Presents numerical data effectively; Able to read and interpret written information., • Teamwork - Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone's efforts to succeed., • Planning/Organizing - Prioritizes and plans work activities; Uses time efficiently; Plans for additional resources; Organizes or schedules other people and their tasks; Develops realistic action plans., • Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments. Other Qualifications: · Must be able to travel to the jobsite(s) as assigned. Education and/or Experience: • Minimum of three years of verifiable experience, thorough knowledge of trades and be computer literate. Experience in CMiC is preferred. Office experience of MS Project is also preferred. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Language Skills: • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Mathematical Skills: • Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. Reasoning Ability: • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Qualifications: • To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • This position involves work at a construction site where duties will be performed both indoors and outdoors, • Overtime may be required to meet project deadlines, • Dexterity of hands and fingers to operate a computer keyboard, mouse and other business machines, • While performing the duties of this Job, the employee is regularly required to stand and walk;, • Use hands to finger, handle, or feel, • Reach with hands and arms, • Climb or balance; stoop, kneel, crouch, or crawl, • Talk or hear, • The employee is occasionally required to sit, • The employee must occasionally lift and/or move up to 100 lbs. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles; outside weather conditions; extreme cold and extreme heat. The employee is occasionally exposed to toxic or caustic chemicals; risk of electrical shock and risk of vibration. The noise level in the work environment is usually loud. Requirements:

Job DescriptionJob Summary The Electrical Panel Builder assembles, wires, and tests electrical control panels and sub-panels in accordance with ISO quality standards, engineering drawings, and work instructions. This role requires experience in control wiring, blueprint reading, and use of electrical testing equipment. Key Responsibilities • Read and interpret electrical schematics, wiring diagrams, and blueprints, • Lay out, drill, tap, and assemble electrical enclosures and sub-panels, • Perform control panel wiring, labeling, and component installation, • Test and troubleshoot electrical systems using voltmeters and other tools, • Follow work instructions, job packets, and material flow processes, • Complete production documentation and reports accurately, • Maintain a clean, safe, and organized work environment, • Perform other duties as assignedRequired Qualifications, • High School Diploma or GED, • 2–4 years of electrical assembly or panel building experience, • 3+ years of control wiring experience preferred, • Ability to read and interpret electrical schematics and technical documents, • Proficiency with hand and power tools (drills, saws, etc.), • Experience using measuring and testing tools (micrometer, voltmeter), • Basic computer skills (file navigation, time tracking systems), • Strong attention to detail and problem-solving skills, • Ability to work independently and meet production goals, • Must be authorized to work in the United StatesWork Environment & Physical Requirements, • Manufacturing/production environment with exposure to noise, moving machinery, and electrical components, • Ability to stand, walk, and use hands for extended periods, • Frequent reaching, handling, and tool use, • Occasional lifting up to 50 lbs, • Must be able to distinguish wire colors and adjust visual focusSafety Requirements, • Must follow all safety procedures and wear required PPE (safety glasses, hearing protection, gloves)

Job DescriptionPEKO Precision Products: We Make Products That Matter PEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: CNC Machinist Your Role: The CNC Machinist is responsible for the setup and operation of a variety of CNC machines, including horizontal and vertical mills. You will set up, operate, and manufacture products according to blueprint specifications and customer requirements. Responsibilities Included • Setup and operate various CNC mill machines, adhering to the blueprint specifications, • Conduct first piece inspection to ensure the part is free of defects and ready for the next stage of production., • Comply with all aspects of 5S, • Assist with other duties as assigned by the Manager.Reports To: Machining Manager Qualifications Basic Qualifications: • Minimum education level of High School, GED, or its equivalent, • 3+ years experience in a machine shop environment, • 3+ years experience working with mill machines Preferred Qualifications:, • Associates in Precision Machining, • Experience with multi-axis CNC milling with FANUC controls, MAZAK, or similar, • Experience in horizontal mill machinesWork Authorization: US Persons PEKO Perks:, • Competitive Total Rewards, • Tuition Reimbursement (IRS Allowable pre-tax Max), • 401K, Medical, Dental, Vision, • Flexible Spending & Health Savings Accounts, • Life, Short and Long-Term Disability, • Recognition Awards & Discretionary BenefitsOur Core Values:, • Compassion: We care about our talented and loyal PEKO family., • Safety: We are committed to providing a safe, clean, and positive workplace., • Integrity: We believe in transparency, honesty, and respect for all stakeholders., • Agility: We are dedicated to maintaining an agile and financially prudent organization., • Endurance: We foster the belief that PEKO people are resilient problem-solvers impacting the future., • Get a glimpse of why we are #PEKOProud: #PEKOProud - YouTubeOther:, • This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice., • For more available opportunities at PEKO, please visit our website:Jobs & Career Opportunities | Rochester NY | PEKO Precision Products A reasonable estimate of the compensation range for this position is $20.00 - $32.00 per hour, plus a 10% shift differential. The wage range for this role considers a wide range of factors when making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational requirements. PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. Powered by JazzHR L7Qgd8JhP4

Job Description Celebrating over 50 years of excellence, Precise Tool & Manufacturing Inc. is Our 280,000 sq. ft. facility houses over 160 state-of-the-art CNC machines. With 50 high-speed 4-axis horizontal machines, we deliver exceptional efficiency and accuracy for intricate, multi-sided machining, allowing us to meet the most demanding production requirements with speed and precision. We are a trusted supplier across industries such as aerospace, defense, medical, energy, and power generation, recognized for our dedication to quality, safety, and innovation. The Precise C.N.C. Machining Institute (PCMI) is facilitated by Precise Tool & Manufacturing Inc., a family-owned, Rochester-based leader in advanced CNC machining and custom manufacturing. PCMI is a 4-month PAID training program designed to give you the skills you need to start your career in CNC machining. Upon successful completion of the program, students have the opportunity to continue their career with a job at Precise Tool & Manufacturing. ABOUT PCMI: PCMI combines classroom instruction with hands-on learning, giving students practical experience and the functional knowledge required to launch their careers in advanced manufacturing. Topics covered throughout the program include: • CNC machining basics, • Blueprint reading, • Machine shop math, • Inspection techniques, • Differentiation between metals, • Cutting tools and their proper use We are looking for students who: • Enjoy working with their hands - whether it be taking equipment apart and putting back together, working on cars, doing carpentry or side jobs, etc., • Have strong mathematical skills, • Are mechanically inclined and curious about how things work, • Are comfortable using computers and working with technology, • Demonstrate excellent attendance and dependability, • Have reliable transportation, • High school tech classes and/or BOCES or vocational school classes are a plus! According to the New York Pay Transparency law, pay rate for this job is $17.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Precise Tool & Manufacturing Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Precise Tool & Manufacturing Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources at (585) 247-0700 Ext. 203.

Job Description Job Summary The CNC Operator is responsible for operating CNC equipment within the Turning, Milling, or Swiss department while ensuring all parts meet quality and customer specifications. This role requires strong blueprint reading skills, in-process inspection capabilities, and the ability to make minor machine adjustments to maintain precision and efficiency. Compensation • $25 - $28 / hr, • 10% shift differential on 2nd, • Overtime: Unlimited available (including Saturdays) Shift • 1st Shift: 7:30 AM – 4:00 PM, • 2nd Shift (Priority): 3:45 PM – 12:30 AM Responsibilities • Read and interpret blueprints and technical drawings, • Perform in-process inspections using appropriate measuring tools (micrometers, calipers, gauges, etc.), • Make tool offset adjustments as needed to maintain part accuracy, • Follow company procedures for tagging, inspection, and documentation, • Ensure all tools and gages are properly calibrated and up to date, • Work closely with supervisors and the Quality team to ensure compliance with customer specifications, • Follow lean manufacturing practices and established shop procedures, • Maintain a clean, safe, and organized workstation, • Perform basic preventative maintenance on machines as required, • Adhere strictly to all safety policies and procedures, • Remain flexible to support overtime needs when required Requirements Qualifications • 1–3 years of CNC machining experience (Turning, Milling, or Swiss preferred), • Ability to perform accurate in-process inspection, • Basic understanding of CNC controls and tool offset adjustments, • Strong attention to detail and commitment to quality, • Ability to work independently and as part of a team, • Willingness to work overtime as needed Benefits Benefits • Overtime opportunities available, • Medical, dental, and vision insurance, • 401(k), • Paid time off and paid holidays

Job Description Immediate Structural Concrete Foreman Position Available! Other Masonry Positions Available: Carpenters, Masons, Finishers, Laborers, Form Fitters LG Evans Construction, Inc. performs work on a mix of public prevailing rate and private commercial projects in the site and concrete construction market. Applicants with a versatile resume in the concrete trades are encouraged to apply. Reliability, a strong work ethic, and professionalism are a MUST. Work will be primarily in the Rochester and surrounding counties area with some minor travel required. The pay could range $20-$35/hr based on position, experience and is negotiable. We offer medical benefits, PTO, and a 401K plan with company match, along with an excellent working environment!! Apply today! There are a variety of ways: Website: www.lgevansinc.com - submit an application right from the career tab In person: Our main headquarters is located at 1823 Lakeville Road, Avon, NY, 14414 Summary As a Structural Concrete professional, you will be integral to the construction process, focusing on concrete forming, finishing, and installation. Reporting to the Site Supervisor, your role involves utilizing core skills such as hand and power tools to ensure high-quality work. Your premium skills in mechanical knowledge and construction estimating will enhance project efficiency, while relevant skills in blueprint reading and carpentry will support comprehensive project execution. Join our team to contribute to innovative construction projects and ensure structural integrity in a collaborative environment. Responsibilities • Oversee and direct designated concrete crew (Foreman), • Set up and dismantle concrete forms and scaffolding as needed., • Operate power tools and hand tools for concrete finishing and rebar installation., • Read and interpret blueprints to ensure accurate construction., • Collaborate with team members on construction site tasks and renovations., • Maintain safety standards and protocols while working on-site., • Estimate material requirements and assist in the mixing of concrete. Qualifications • Proficient in concrete forming and finishing techniques, • Skilled in using hand and power tools, • Experience in construction site operations and renovation projects, • Knowledge of blueprint reading and construction estimating, • Familiarity with rebar installation and concrete mixing, • Relevant experience in carpentry, drywall, and roofing tasksCompany DescriptionWelcome to LG Evans Construction Inc. We are a commercial site, concrete, and masonry contractor specializing in both private and public works. Driven by our CORE Values, we strive to exceed expectations on every project!Welcome to LG Evans Construction Inc. We are a commercial site, concrete, and masonry contractor specializing in both private and public works. Driven by our CORE Values, we strive to exceed expectations on every project!

Job DescriptionSt. John’s is leading and inspiring a shift in society’s views of elderhood. Join our family of dedicated, talented employees who are at the forefront of innovative senior services delivery in this community. St. John’s embraces living every day by fostering a culture that is friendly, respectful, responsive, compassionate, innovative, and fun for both employees and the elders and residents that call St. John’s home. If this description speaks to you, continue reading about the opportunity of Registered Dietitian. Position Summary: Assure residents balanced nutrition needs due to specific medical conditions with food preferences to achieve agreed upon goals. Qualifications & Education Required: • Bachelor’s Degree in Food and Nutrition or Dietetics required, • ADA registered or registration eligible required, • Certified Dietitian/Nutritionist in NYS preferred, • 1 year in long term care preferred, • Ability to interact with elders and care for their needs, • Ability to lead and coordinate team activities Position Competencies: • Interpersonal skills: support emotional, physical and social well-being of elders and Core Team, • Problem solving / decision making, • Technical expertise in Matrix Care, MS Office, and BluePrint Position Responsibilities: • Responsible for nutritional assessments and monitoring of assigned residents, • Collaborate with clinical teams to facilitate appropriate nutritional care and care planning on an as needed basis, • Provide diet counseling to residents and their family members as needed, • Act as a liaison for policy and procedures pertaining to clinical nutrition, • Serve as a liaison between foodservice and clinical nutrition needs; including menu updates, product updates and changes and coordination of therapeutic and mechanically altered dietary needs, • Help with other duties as needed that support the Core Team to fulfill St John’s mission vision and values Physical Requirements: • Walking, standing for lengthy periods of time. Exposure to Conditions: • May provide care to individuals with infectious diseases. May be subject or exposed to experiences that involve physical aggression. Occasional use of complex electrical equipment.

Job Description Job Summary: The Senior CMM Programmer is responsible for leading the development, optimization, and validation of complex CMM programs for precision measurement of intricate geometries. This role serves as a technical authority in metrology, driving best practices in inspection strategy, data integrity, and process efficiency. The Senior CMM Programmer collaborates cross-functionally to ensure accurate, timely inspection results while mentoring team members and supporting continuous improvement initiatives. This position operates with a high degree of autonomy and partners closely with Quality leadership to align metrology processes with organizational goals. Essential Duties and Responsibilities: • Lead the development, optimization, and validation of advanced CMM programs (online and offline) to meet complex customer specifications and tight tolerances., • Serve as the subject matter expert (SME) for CMM programming, inspection strategies, and metrology best practices., • Oversee program prove-outs, validation, and correlation studies to ensure measurement accuracy and repeatability., • Troubleshoot and resolve complex programming and measurement issues; approve final programs and first article inspections., • Drive continuous improvement initiatives focused on reducing cycle times, improving measurement accuracy, and increasing efficiency., • Establish and maintain standardized programming methodologies, templates, and best practices., • Lead statistical data collection strategies and ensure proper integration with manufacturing and quality systems., • Validate measurement results using secondary inspection methods and ensure compliance with industry standards., • Support and/or lead CMM calibration, maintenance, and system performance verification., • Develop, review, and maintain technical documentation, including work instructions, inspection plans, and operation sheets., • Provide technical leadership, mentorship, and training to CMM programmers and operators., • Coordinate inspection priorities and workflow to ensure timely feedback to production and engineering teams. Additional Responsibilities: • Partner closely with the Quality Manager and cross-functional teams to align metrology strategies with business objectives., • Act as a key liaison between Quality, Engineering, and Manufacturing to resolve technical issues and improve processes., • Lead or contribute to root cause analysis, corrective actions, and continuous improvement projects., • Support cost reduction, quality enhancement, and process optimization initiatives through data-driven analysis., • Interface with customers and auditors as a technical expert in metrology and inspection processes., • Participate in strategic planning for metrology equipment, software, and technology upgrades., • Lead special projects and departmental initiatives as assigned., • Provide backup support for quality assurance functions when needed. Physical Demands and Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. The employee is occasionally required to reach with hands and arms. The employee is occasionally required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 25 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from low, moderate to loud. Education, Skills and Experience: • Bachelor’s degree in Engineering, Manufacturing, or related field; or equivalent combination of education and extensive experience., • 5–10+ years of advanced CMM programming experience, preferably in a high-precision manufacturing environment., • Expert-level proficiency in CMM software (e.g., PC-DMIS, Calypso, or similar platforms)., • Strong understanding of GD&T (Geometric Dimensioning & Tolerancing) and blueprint interpretation., • Demonstrated ability to develop complex inspection strategies for tight-tolerance components., • Advanced knowledge of metrology principles, measurement uncertainty, and correlation techniques., • Experience with statistical analysis tools and data-driven decision-making., • Proven leadership, mentoring, and training capabilities., • Strong analytical thinking, problem-solving skills, and attention to detail., • Excellent communication and organizational skills., • Ability to work independently and lead initiatives with minimal supervision., • Good oral and written communication skills., • Strong organization skills., • Work independently with minimal supervision.

Job Description We are hiring a Machine Shop Quality Technician in Rochester, NY. This is a precision machine shop that manufactures tight-tolerance components for the aerospace and defense industries — parts that have to be right every time. As a Quality Technician, you'll be a critical line of defense in a high-mix, low-volume environment where no two days are the same and your eye for detail directly impacts mission-critical products. You'll work closely alongside engineers and machinists and have real ownership over inspection processes. What you'll do: • Perform first-piece, in-process, and final inspections on machined parts to the highest quality standards, • Interpret engineering drawings, GD&T callouts, and job specifications with confidence, • Conduct gage calibration and maintain accurate records in Gage Track software, • Audit production quality at every phase of manufacture and document findings clearly, • Partner with engineers and machinists on root cause analysis and continuous improvement, • Develop and maintain detailed in-process and final inspection reports, • Support AS9100 / ISO 9001 compliance and participate in internal audits Requirements • 5+ years of quality inspection experience in a machine shop or precision manufacturing environment, • Solid command of standard measurement tools: calipers, micrometers, CMM, height gauges, etc., • Strong blueprint reading skills including GD&T, • Familiarity with AS9100 / ISO 9001 quality management systems, • Organized, detail-obsessed, and able to manage multiple inspection queues under deadline pressure, • High school diploma or equivalent; internal auditing experience is a plus Benefits • Medical, dental & vision, • 401(k), • PTO, • Day & evening shifts available

Job DescriptionJob Description Celebrating over 50 years of excellence, Precise Tool & Manufacturing Inc. is a family-owned, Rochester-based leader in advanced CNC machining and custom manufacturing. We deliver exceptional efficiency and accuracy for intricate, multi-sided machining, allowing us to meet the most demanding production requirements with speed and precision. We are a trusted supplier across industries such as aerospace, defense, medical, energy, and power generation, recognized for our dedication to quality, safety, and innovation. At Precise Tool, we foster a collaborative work environment where employees are valued and supported. We offer competitive compensation, comprehensive benefits, and opportunities for professional development. Join our team as a Commercial Cleaner and be part of a company that combines cutting-edge technology with a commitment to excellence and employee success. Precise CNC Machining Institute (PCMI) is a 14-week, paid training program facilitated by Precise Tool & Manufacturing Inc. The program is designed to prepare individuals for careers in precision manufacturing by providing Students with full-time, hands-on training focused on developing the technical knowledge and practical skills needed to succeed in a modern manufacturing environment. The program curriculum includes shop math, blueprint reading, introductory GD&T, machining on mills and lathes, and manufacturing safety fundamentals. We are seeking a PCMI Instructor to educate, train, and mentor students throughout the program by delivering classroom instruction, providing hands-on machine training, reinforcing safety compliance standards, and preparing students for successful careers on the manufacturing floor. JOB REQUIREMENTS • Prepares daily lesson plans., • Provides hands on instruction for students operating machines., • Orders necessary raw materials for students to complete sample projects., • Manages budget for books, raw materials and any other course related expenses., • Sets students up with access to ToolingU, online software program., • Maintains inventory of tooling/tools., • Grades students’ performance on written tests and ability on machines., • Communicates with students concerning proper behavior and expectations., • Ensures students understand and follow all manufacturing safety procedures, OSHA guidelines, and safety compliance requirements expected on a production floor., • Provides ongoing support and mentorship to program graduates as they transition to the shop floor, helping reinforce skills, safety practices, and overall job success following completion of the 14-week program., • Other duties as assigned. KNOWLEDGE, SKILLS, AND ABILITIES • Extensive understanding of blueprint reading., • Knowledge of geometric dimensioning and tolerance., • Ability to demonstrate proper machining practices., • Ability to demonstrate proper work setups., • Demonstrate safe working habits., • Familiar with algebra, trigonometry, and geometry., • Knowledge of G and M code programming., • Knowledge of Mazatrol programming., • Experience using Microsoft Office (Word, PowerPoint, Excel)., • 20 years machining experience., • Education experience preferred., • NYS Journeymen Papers preferred. JOB BENEFITS • Vacation, • Sick Days, • Holidays, • Health Insurance, • Dental Insurance, • Vision Insurance, • Voluntary Disability Insurance, • Company-paid Life Insurance, • 401(k) Plan with Company Match According to the New York Pay Transparency law, pay range for this job is $32.00 - $38.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Precise Tool & Manufacturing Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Precise Tool & Manufacturing Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources at (585) 247-0700 Ext. 203.

Job Description JOB SUMMARY Under the direct supervision of the Quality Director, the Quality In-Process Inspector is responsible for assuring production parts are inspected by the machine operators in compliance with the frequency and methods determined by the IPR and the Quality Team. This is accomplished by travelling throughout the shop and working closely with the machine operators, supervisors, and plant manager to assure that the customer quality requirements are met. ESSENTIAL FUNCTIONS Requirements of this position include, but are not limited to: • Promote and support the requirements and principles of the Precise Quality Management System and AS9100., • Auditing of all jobs currently running on the shop floor to assure that all IPR`s and QCR`s are completed by the machinists as required per the job traveler and customer requirements., • The ability to assist the machinist with the measurement of parts per the QCR and IPR., • Understanding of measurement equipment used to verify parts are meeting the quality requirements / drawings., • Ability to run pre-programmed parts on the CMM for auditing purposes., • High level of integrity to be the “voice of the customer”., • Visual inspection of machined parts to customer requirements (deburred properly)., • Communicate with all departments pertaining to quality issues. KNOWLEDGE, SKILLS, AND ABILITIES • Basic understanding of the AS9100D Quality Management System., • Attention to detail is required., • Basic blueprint reading and understanding of work instructions per job requirements., • Use of standard Quality measurement tools such as calipers, micrometer, and dial indicators., • Communication skills are of an up most importance. Being able to communicate inspection results effectively is a must for this position., • Above average math skills a plus. EDUCATION AND EXPERIENCE • High School Diploma., • Minimum 5 years of experience working in Quality preferred., • Understanding of work instructions., • Machining experience a plus., • Minimum 5 years of experience in the metal industry and or parts manufacturing industry preferred. JOB BENEFITS • Vacation, • Sick Days, • Holidays, • Health Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Voluntary Disability Insurance, • 401(k) Plan with Company Match According to the New York Pay Transparency law, pay range for this job is $20.00 - $29.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Precise Tool & Manufacturing Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Gender/Sexual Orientation/Gender Identity/Religion/National Origin/Disability/Veteran Precise Tool & Manufacturing Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodation for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources at (585) 247-0700 Ext. 203.

Job DescriptionDescription: About Us: Founded in 1997, Vuzix (NASDAQ: VUZI) is a growing, dynamic company that specializes in the design, manufacturing and sale of smart glasses and augmented reality (AR) technologies and products for the enterprise and consumer markets. Company products include wearable displays and computing devices that offer portable, high-quality viewing experience for applications in augmented reality, digital information, utility, and entertainment. Position Summary: The Quality Technician, Level II will evaluate and report on the quality of products throughout both the Hendrix Road facility and Becker Road Waveguide division. They will participate in the support of the entire course in manufacturing wherever quality support is required. It is up to this position to perform inspections where needed, review work instructions, interpret the company quality standards, engineering diagrams, and specifications for the products. The position will assist in creating and executing appropriate quality inspections and processes according to those inputs. If there is an issue, they must compile data and report to the Quality Manager for discussion and make recommendations that help to bring about positive changes in quality processes. This position will support the functions of the Quality Department to meet the requirements of the relevant ISO 9001:2015 standards for quality based on the quality objectives established by Top Management. Essential Duties and Responsibilities: • Collaborates with both corporate internal and external customers, at both Hendrix and Becker Road facilities, taking part in the inspection of quality processes and operation of quality equipment where needed., • Assists with internal and external quality audits per the Quality Assurance Mangers discretion., • Maintains records of calibration of quality control equipment, and coordinates with other departments., • Evaluate inspection data noting relevant deviations from standards and prepare inspection sheets and advise on quality processes needed., • Promote continuous improvement by identifying areas for quality control improvement and help implement new methods., • Ability to use and teach others how to use measurement devices, at incoming inspection as well as in production., • Perform the incoming RMA process, collaborate with Customer support, and oversee inventory control of returned merchandise., • Write quality documents such as Inspection sheets, Deviations and Waivers, CAPAs, NCMRs, RMAs etc., • Update job knowledge with training opportunities both internal and external., • Follow instructions but also be a self-motivated team member working to achieve corporate goals., • Perform Particle counts, records, and report data to support the standards of the cleanroom at Becker Road., • Meets required ISO 9001:2015 standards and necessary training based on the relevant Quality Objectives. Competencies: To perform this job successfully, an individual should demonstrate the following competencies: • Written Communication – Read and interpret written information effectively, write clearly and concisely, adapt writing style for different audiences., • Verbal Communication – Give focused attention to what others are saying, take time to understand what and respond when appropriate without interrupting, speak clearly and effectively express ideas and opinions, adapt and react professionally in both positive and negative situations., • Teamwork & Collaboration – Balance team and individual responsibilities, consider others’ views objectively and with openness to changing your own, give and encourage feedback, contribute to a positive team dynamic, prioritize team success over personal interests, work effectively across departments toward company goals., • Professionalism – Interact with others in a considerate manner, follow through on commitments, react well under pressure, and preserve confidentiality, control emotions, and accept responsibility, maintain focus on solutions, and treat others with respect and consideration regardless of their status or position., • Motivation & Initiative – Demonstrate persistence and ability to adapt to changes in daily workflow and overcome obstacles, ask for, and offer help when needed, work independently when required, volunteer readily and look for ways to improve and create successful outcomes, positively contribute to overall work environment., • Respect & Integrity – Treat people with respect, work ethically and with honesty and integrity, inspire the trust of others, demonstrate appreciation and sensitivity for cultural differences, help promote inclusion and understanding of the value of diversity, embrace differences and support a harassment-free environment. Requirements: Minimum Qualifications: • Written and verbal communication skills., • Math, computer, and analytical skills., • Microsoft Office Word, Excel, etc., • Internal and external auditing abilities, • Attention to detail, blueprint reading., • Willingness to work in a team environment. Preferred Qualifications: • Associate’s degree or other 2-year degree, or equivalent firsthand practical experience., • 5-7 years’ experience with production inspection and GD&T knowledge., • Basic 6s and CPI methods. Supervisory Responsibilities: • Minimal monitoring and training quality inspectors when needed for incoming and in process inspection. Travel: Negligible. Physical Demands: Frequently required to sit, speak, hear, see, and perform repetitive motion (data entry). Occasionally required to lift or carry (30 lb. minimum). Adequate color vision and acuity. Reasonable accommodation will be made available if applicable. Vuzix Corporation is an Equal Employment Opportunity (EEO) Employer. We consider applicants without regard to race, color, religion, creed, gender, national origin, age, disability, marital or veteran status, or any other legally protected status. We are committed to recruiting and employing the best talent available.

Job DescriptionDescription: Position Summary Operates CNC (Computer Numerically Controlled) lathes or mills or to machine metallic and nonmetallic work pieces to produce precision machined parts to acceptable levels of efficiency and quality on both new and existing production processes. Works on the highest level, most complicated jobs. Operates machining centers on repetitive production work involving skill and dexterity in the operating. Attention is required to prevent damage product or damage to machine center. Makes necessary machine adjustments to ensure satisfactory production. Inspect work for obvious defects and dimensional integrity. Mentors and leads lower level employees. Essential Duties and Responsibilities In addition to adhering to the policies of the company outlined in the PGM Employee Handbook, an individual servicing in this capacity shall consistently able to: • Operate CNC mills and/or lathes running new and existing production processes using proper procedures and equipment to establish and ensure consistent and quality parts, optimum perishable tooling usage, and acceptable quality levels., • Work with Set-up Operators debugging and developing new production processes and learning set-up skills., • Perform routine preventative maintenance, as required., • Provide training and instruction as needed to CNC I, II, and III operators in the operation and preventative maintenance of CNC mills and/or lathes and proper usage of required inspection equipment., • Monitor and maintain perishable tooling inventory for each assigned job., • Establish and perform all required inspection duties to maintain acceptable quality levels., • Record Statistical Process Control (SPC) data, as required., • Inform supervisor of any problems associated with equipment, processes or procedures trying to explore, develop and recommend continuous improvement ideas., • Analyzes blueprint and specifications., • Complete job related paperwork accurately and completely, which includes: expedite sheets, move tickets, and job cards., • Advanced GD&T skills., • Basic and Advanced Vantage training., • Perform basic to complicated repeat set-ups, tear downs and organize perishable tool list – tool list to proper kit location., • Verifies spindle, feed rate, depth of cut and tool positions relative to work piece., • Follow company policies as outlined in the employee handbook., • Other duties may be assigned. Supervisory Responsibilities This position may have team leadership responsibilities. Education, Training and/or Experience High school diploma, general education degree (GED), and/or technical school, associates degree; and five to seven years related experience and/or training; or equivalent combination of education and experience. Requirements: Benefits: • Competitive Pay, • Medical effective on start date, • Dental, • Life Insurance (plus additional supplemental coverage), • 401(k) program, • Short & Long Term Disability, • Profit Sharing Program, • Vacation Program, • Educational Financial Assistance, • Flexible Spending Accounts, • Health Savings Accounts, • And others! EEO Statement PGM will consider all individuals for any position for which they are qualified and able to perform. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities and veterans to apply to all of our job openings. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, or national origin, age, disability status, Genetic Information & Testing, Family & Medical Leave, protected veteran status, or any other characteristic protected by law.

Job Description Commercial HVAC Technician & Sheet Metal Worker We are seeking experienced Commercial HVAC Technicians and Sheet Metal Workers to join our team in Rochester, NY. The ideal candidates will specialize in the installation, maintenance, and repair of HVAC systems and sheet metal components for commercial buildings. This position requires expertise in large-scale systems, attention to detail, and a commitment to safety and quality work. Key Responsibilities: • HVAC System Installation & Maintenance: Install, assemble, and repair commercial HVAC systems, including ductwork, air handlers, chillers, boilers, and ventilation systems., • Sheet Metal Fabrication & Installation: Measure, cut, assemble, and install sheet metal ductwork and components according to project specifications., • Blueprint & Code Compliance: Read and interpret blueprints, specifications, and building codes to ensure proper installation and compliance., • Welding & Fabrication: Perform welding, soldering, and cutting of HVAC ductwork and sheet metal using specialized tools and equipment., • Safety Adherence: Maintain a safe working environment and follow OSHA, company, and industry safety protocols. Qualifications: • Minimum of 3 years of experience as an HVAC Technician or Sheet Metal Worker, specifically in commercial construction., • Extensive knowledge of commercial HVAC systems, ductwork fabrication, and hydronic systems., • Ability to read and interpret commercial blueprints and schematics., • Proficiency in using HVAC-specific tools, including duct fabrication equipment, metal cutting tools/ machines, and welding tools., • Physical stamina to lift heavy materials, climb ladders, and work in challenging environments. Total Compensation up to $72.24 per hour including premium benefits. Company DescriptionGreat time to get involved with this rapidly growing company!Great time to get involved with this rapidly growing company!

Job Description CNC Machinist – West Henrietta, NY Hours: Mon–Fri | 7:00 AM – 3:30 PM Pay: $23.00 – $34.00/hour (depending on experience) + bonus Overview We’re looking for an experienced CNC Machinist with strong Swiss lathe expertise to handle both prototype and production work. You’ll program and run Tsugami Swiss Lathes, CNC lathes, and mills—owning jobs from setup through completion. What You’ll Do • Program and operate Tsugami Swiss Lathes, CNC mills, and lathes, • Machine precision parts to tight tolerances (< 0.0001”), • Read blueprints and determine tooling, speeds, and setups, • Handle prototype work with minimal supervision, • Inspect parts and maintain quality standards, • Support process improvements and train others as needed What You Bring • 5+ years Swiss lathe machining experience (Tsugami preferred), • 2+ years CNC programming (Mastercam, PartMaker), • Strong blueprint reading and advanced math skills, • Experience with tight-tolerance machining and prototype work, • Detail-oriented, self-driven, and safety-focused Be part of a team focused on precision, innovation, and meaningful impact—where your skills make a difference every day. Apply now for immediate consideration for this Machinist role in West Henrietta, NY. We look forward to connecting with you! Company DescriptionKelly helps companies recruit and manage skilled workers and helps job seekers find great work in industries such as accounting and finance, education, engineering, government, manufacturing and production, technology, and more. Since inventing the staffing industry in 1946, we’ve become experts in the many specialties and local and global markets we serve. With a network of suppliers and partners around the world, we connect 450,000+ people with work every year. We ensure companies have the people they need, when and where they’re needed most. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S.Kelly helps companies recruit and manage skilled workers and helps job seekers find great work in industries such as accounting and finance, education, engineering, government, manufacturing and production, technology, and more.\r\n\r\nSince inventing the staffing industry in 1946, we’ve become experts in the many specialties and local and global markets we serve. With a network of suppliers and partners around the world, we connect 450,000+ people with work every year. We ensure companies have the people they need, when and where they’re needed most.\r\n\r\nKelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S.

Job DescriptionDescription: Position Summary Operates CNC (Computer Numerically Controlled) lathes and/or mills to machine metallic and nonmetallic workpieces to produce precision machined parts at acceptable levels of efficiency and quality on both new and existing production processes. Operates machining centers on repetitive production work involving skill and dexterity in the operating. Attention is required to prevent damaged product or damage to machine center. Making necessary minor machine adjustments to ensure satisfactory production. Inspect work for obvious defects and dimensional integrity Requirements: Essential Duties and Responsibilities In addition to adhering to the policies of the company outlined in the PGM Employee Handbook, an individual servicing in this capacity shall consistently be able to: • Operate CNC mills and/or lathes, running new and existing production jobs of moderate complexity without assistance unless unusual problems occur. Must be able to make minor adjustments when necessary., • Monitor perishable tooling inventory for each assigned job., • Perform all required inspection duties to maintain acceptable quality levels., • Inform supervisor of any problems associated with equipment, processes or procedures and offer ideas or possible solutions., • Complete job-related paperwork accurately and completely which includes: expedite sheets, move tickets, and job cards., • Perform routine preventative maintenance, as required, including but not limited to daily preventative machine maintenance logs., • Analyzes blueprint and specifications manual for requirements such as dimensions and tolerances, tooling instructions on fixturing, gauging, print rev. level, and cutting instruments., • Computes unspecified dimensions and necessary machine settings as required by the work order., • Positions and secures tools in holders, lifts work piece manually or with hoist, and secures work piece in chuck or appropriate fixture., • Starts machine, turns or initiates software program and engages feed. Directs coolant flow to tool and work piece., • Observes material removal step(s) to verify process integrity and detect excessive wear or malfunction., • Verifies conformance of machined work pieces to specification tolerances., • Plots dimensional data on control charts and collects SPC Data. Initiates proper procedural action if control chart warning limits are identified or out-of-tolerance conditions are experienced., • Basic and Advanced Vantage training, • Follow company policies as outlined in the employee handbook and values, • Other duties may be assigned. Supervisory Responsibilities This job has no supervisory responsibilities. Education, Training and/or Experience High school diploma or general education degree (GED); and one to five years related experience and/or training or equivalent combination of education and experience. Internal Training Requirements • Company Practices & Policies, • Lock Out/Tag Out Video, • Company Benefits Orientation, • Personal Protection Equipment, • Mission, Vision & Values Training, • Right-to-Know Training, • Values Based Leadership, • Traveler Sign-Off, • Bloodborne Pathogen, • Hazardous Communication, • Fire Extinguisher Safety Benefits: • Competitive Pay, • Medical effective on start date, • Dental, • Life Insurance (plus additional supplemental coverage), • 401(k) program, • Short & Long Term Disability, • Profit Sharing Program, • Vacation Program, • Educational Financial Assistance, • Flexible Spending Accounts, • Health Savings Accounts, • And others!

Job DescriptionDescription: Position Summary Operates CNC (Computer Numerically Controlled) lathes or mills or to machine metallic and nonmetallic work pieces to produce precision machined parts to acceptable levels of efficiency and quality on both new and existing production processes. Operates machining centers on repetitive production work involving skill and dexterity in the operating. Attention is required to prevent damage product or damage to machine center. Makes necessary machine adjustments to ensure satisfactory production. Inspect work for obvious defects and dimensional integrity. Requirements: Essential Duties and Responsibilities In addition to adhering to the policies of the company outlined in the PGM Employee Handbook, an individual servicing in this capacity shall consistently be able to: • Operate CNC mills and/or lathes running new and existing production processes using proper procedures and equipment to establish and ensure consistent and quality parts, optimum perishable tooling usage, and acceptable quality levels., • Work with Set-up Operators debugging and developing new production processes and learning st-up skills., • Perform routine preventative maintenance, as required., • Provide training and instruction as needed to CNC I and CNC II operators in the operation and preventative maintenance of CNC mills and/or lathes and proper usage of required inspection equipment., • Monitor and maintain perishable tooling inventory for each assigned job., • Establish and perform all required inspection duties to maintain acceptable quality levels., • Record Statistical Process Control (SPC) data, as required., • Inform supervisor of any problems associated with equipment, processes or procedures trying to explore, develop and recommend continuous improvement ideas., • Analyzes blueprint and specifications., • Complete job related paperwork accurately and completely, which includes: expedite sheets, move tickets, and job cards., • Basic GD&T skills., • Basic and Advanced Vantage training., • Perform basic repeat set-ups, tear downs and organize perishable tool list – tool list to proper kit location., • Verifies spindle, feed rate, depth of cut and tool positions relative to work piece., • Follow company policies as outlined in the employee handbook., • Other duties may be assigned. Supervisory Responsibilities This position has no supervisory responsibilities. Education, Training and/or Experience High school diploma or general education degree (GED) and/or technical school, associates degree; and three to five years related experience and/or training; or equivalent combination of education and experience. Internal Training Requirements • Company Benefits Orientation, • Bloodborne Pathogen, • Company Practices & Policies, • Fire Extinguisher Safety, • Mission, Vision & Values Training, • Hazardous Communication, • Values Based Leadership, • Lock Out/Tag Out Video, • Traveler Sign-Off, • Personal Protection Equipment, • Right-to-Know Training

Job Description High‑Tolerance CNC Operator — Aerospace Components Rochester, NY | $20–$40/hr (DOE) | Overtime: 10+ hrs/week Is this you? • Do you thrive turning blueprints into flawless parts with tight tolerances?, • Are you confident setting up CNC equipment, changing tools, and dialing in offsets?, • Do you take pride in meticulous inspection using precision measuring tools? If you answered yes, TekPro’s aerospace manufacturing partner in Rochester wants to meet you. You’ll join a stable, precision‑focused team in an air‑conditioned environment where quality and safety drive every decision—and where consistent overtime boosts your earnings. What you’ll handle • Operate and set up CNC machines for aerospace‑grade components, • Read engineering drawings/blueprints and plan machining steps, • Perform tool changes, offsets, and adjustments to hold spec, • Inspect and validate parts with precision measurement instruments, • Maintain efficiency while meeting strict quality and safety standards, • Support continuous improvement initiatives on the shop floor What it takes, • 1+ year of CNC machine operation, • Blueprint literacy and proficiency with precision measuring tools, • Experience with setups, tooling, and offsets preferred, • An eye for detail and commitment to producing premium‑quality parts, • Dependable for a set shift with overtime opportunities Why you’ll want this role, • $20–$40 per hour based on experience, • 10+ hours of weekly overtime available, • Clean, high‑precision aerospace shop with air conditioning, • Long‑term opportunities with a stable precision manufacturer Ready to advance your CNC career? Apply through TekPro to explore next steps.

Job Description Description: Stop managing a capped book of business and start building your own. Best Version Media offers a high-performance, turn-key opportunity for sales professionals who thrive on the hunt. Own a local territory, drive new business, and build a multichannel marketing portfolio with no startup costs and no cap on your income. Your Role: • Prospect: Build a high-velocity sales pipeline through direct outreach to local decision-makers. You're the primary growth engine in your market., • Sell: As an independent contractor, you'll execute face-to-face marketing pitches. You'll offer a top-of-the-line product suite, including premium print, hyper-targeted digital ads, and online reputation tools that solve challenges for local business owners., • Launch: Follow our proven blueprint to hit your sales baseline and launch your publication. Most launch within 3-4 months, but top producers like you can go to print in as few as 13-25 days., • Scale: Our established infrastructure helps you build a durable, high-volume portfolio. Once your magazine is live, you focus on compounding your income by retaining existing accounts while hunting for new ones., • Dominate: Use our professional training and data-backed systems to become the go-to marketing authority in your local community. Earning Potential: This is a fully commission-based role for those who want to be paid exactly what they're worth. Unlike traditional 'hunt-and-kill' sales roles, our commission model is cumulative. Most achieve: Year 1: $65K – $100K (Target) Year 2+: $150K – $250K+ (High Performer) Top Producers: $1.5M – $3.9M+ total career earnings Relevant Experience: We value your track record of winning more than a specific degree. We train the product, but you bring the sales discipline. This role is for you if you are: • Entrepreneurial: You want the autonomy of business ownership with the backing of a major corporation., • Competitive: You have a "top of the leaderboard" mentality and a strong work ethic., • Self-starter: You don't need a manager to tell you to pick up the phone., • Resilient and driven: You view "No" as a stepping stone to the next "Yes.", • A proven closer: You have a background in B2B sales, business development, or high-ticket closing. Why Best Version Media? Join a marketing powerhouse with over 1,300 publications and 25,000+ clients across North America. Our back-end teams handle all the design, printing, and digital expertise, so you can focus on building relationships and making sales. Proudly recognized as a Glassdoor Best Place to Work, we're committed to a supportive, inclusive, and empowering culture. Our Top Sales Executives Have: Ability to meet with business owners face-to-face, and a professional home office setup: laptop, high-speed internet, and a mobile phone.

Job DescriptionDescription: DiMarco Constructors is seeking an experienced Project Superintendent to oversee field operations for commercial construction projects Summary: To provide on-site coordination for all phases of DiMarco construction projects, including coordinating and hiring subcontractors, material and equipment, ensuring that specifications are being strictly followed, and work is proceeding on schedule and within budget. Superintendent/On Site Project Manager shall be responsible for scheduling, inspections, quality control, and job site safety. Essential Functions / Major Responsibilities of Superintendent: • Schedule subcontractors, consultants, and vendors in critical path to ensure timely completion., • Perform quality control duties and responsibilities regarding the work being performed., • Communicate with project team regarding OCO, RFI’s, and Material Submittals., • Ensure that subcontractor is fully executing and complying with his contracted scope of work., • Coordinate required inspections with local jurisdictions., • Identify conflicts in construction progress and communicate them to project team for resolution., • Maintain daily log of activities on the jobsite., • Walk all areas on project daily to monitor activities and assist in future planning., • Facilitate at foreman, project management and owner meetings., • Issue notices of non-compliance to subcontractors in regards to quality of work or scheduling for safety, health, and environmental quality., • Ensure subcontractor has corrected all deficiencies identified by project team, • Ensure that the job site is always kept in a clean and organized manner., • Perform job progress and completion punch list identification and completion., • Assist in obtaining permits or approval of revisions., • Plan and maintain a submittal log in concert with the project documents. Secondary Functions: • Continuously evaluate and document existing conditions before and during constructions., • Identify areas of work that are in addition to or outside of subcontracted scope., • Opening the jobsite at beginning of the day and securing the jobsite at the end of the day., • Assist in pre-qualification of sub-contractors. . Supervisory Responsibility: • Superintendent shall supervise all subcontractors, consultants, and vendors on a daily basis. This supervision shall ensure adequate manpower is available for each task and compliant work performed. This position shall be responsible for monitoring project security personnel. Superintendent shall supervise all Assistant-Superintendents, Project Foremen, Engineers and Skilled Workforce. Knowledge, Skills and Abilities: • Provide direction to and resolve problems amongst various subcontractors and vendors., • Ability to identify deficient work and provide resolution., • Cloud based project management knowledge, Bluebeam, Microsoft office, Asta/Microsoft Project, • Communicate using the following tools: CMiC, telephone, scanning, email, computer, and camera., • Blueprint reading., • Physically lift up to 100 lbs., • Endurance and ability to visit entire job site, including stairs or other elevated structures., • Monitoring jobsite general health and safety., • Customer Service - Manages difficult or emotional customer situations; Responds promptly to customer needs; Solicits customer feedback to improve service; Responds to requests for service and assistance; Meets commitments., • Interpersonal Skills - Focuses on solving conflict, not blaming; Maintains confidentiality; Listens to others without interrupting; Keeps emotions under control; Remains open to others' ideas and tries new things., • Oral Communication - Speaks clearly and persuasively in positive or negative situations; listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings., • Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality., • Quantity - Meets productivity standards; Completes work in timely manner; Strives to increase productivity; Works quickly., • Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly., • Adaptability - Adapts to changes in the work environment; Manages competing demands; Able to deal with frequent change, delays, or unexpected events., • Attendance/Punctuality - Is consistently at work and on time; Ensures work responsibilities are covered when absent; Arrives at meetings and appointments on time., • Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals; Completes tasks on time or notifies appropriate person with an alternate plan., • Initiative - Volunteers readily; Undertakes self-development activities; Seeks increased responsibilities; Takes independent actions and calculated risks; Looks for and takes advantage of opportunities; Asks for and offers help when needed., • Written Communication - Writes clearly and informatively; Edits work for spelling and grammar; Varies writing style to meet needs; Presents numerical data effectively; Able to read and interpret written information., • Teamwork - Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone's efforts to succeed., • Planning/Organizing - Prioritizes and plans work activities; Uses time efficiently; Plans for additional resources; Organizes or schedules other people and their tasks; Develops realistic action plans., • Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments. Other Qualifications: · Must be able to travel to the jobsite(s) as assigned. Education and/or Experience: • Minimum of five years of verifiable experience, thorough knowledge of trades and be computer literate. Experience in CMiC and similar Project management software is preferred. Office experience of MS Project is also preferred. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Language Skills: • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Mathematical Skills: • Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. Reasoning Ability: • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Qualifications: • To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • This position involves work at a construction site where duties will be performed both indoors and outdoors, • Overtime may be required to meet project deadlines, • Dexterity of hands and fingers to operate a computer keyboard, mouse and other business machines, • While performing the duties of this Job, the employee is regularly required to stand and walk;, • Use hands to finger, handle, or feel, • Reach with hands and arms, • Climb or balance; stoop, kneel, crouch, or crawl, • Talk or hear, • ·he employee is occasionally required to sit, • The employee must occasionally lift and/or move up to 100 lbs. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles; outside weather conditions; extreme cold and extreme heat. The employee is occasionally exposed to toxic or caustic chemicals; risk of electrical shock and risk of vibration. The noise level in the work environment is usually loud. Requirements:

Job Description We are seeking a skilled and dependable Welder to join our production and fabrication team on B shift. The ideal candidate will have experience with TIG and MIG welding processes, blueprint reading, metal fabrication, and maintaining high production and quality standards in a fast-paced manufacturing environment. Essential Duties & Responsibilities • Set up and operate electric and gas welding machines to weld metal parts according to work orders, blueprint layouts, and verbal instructions., • Regulate gas flow and mixtures for proper welding applications., • Maintain records of welding settings from precision TIG control panels and power packs for repeat production applications., • Clean parts and materials to remove contamination prior to welding., • Set up and perform all phases of welding operations using clamps, fixtures, torches, and related equipment while working to specified tolerances., • Perform grinding and testing duties on fabricated products including drain pans, tanks, and other assemblies., • Assemble assigned parts and components in accordance with production guidelines and quality standards., • Move materials throughout the work area using forklifts, hand trucks, or other approved equipment as needed., • Complete standard job sheets and production documentation for each job., • Change weld cups, electrodes, and tooling as necessary to maintain quality and production standards., • Examine electrodes for sharpness and sharpen as needed., • Assist management by recommending tooling and equipment improvements., • Measure and set up jobs according to blueprints and production specifications., • Report discrepancies in materials, blueprints, or production requirements to management., • Notify management of equipment malfunctions or area repairs needed., • Maintain tools, gauges, and equipment in a clean, organized, and safe condition., • Follow all company policies and procedures with special attention to safety regulations and safe work practices., • Wear required protective clothing and personal protective equipment (PPE) in accordance with safety guidelines., • Perform additional duties as assigned.Qualifications, • Previous welding and fabrication experience required., • Experience with TIG welding preferred; MIG welding experience a plus., • Ability to read and interpret blueprints, work orders, and technical drawings., • Ability to use measuring tools and maintain specified tolerances., • Strong attention to detail and commitment to quality workmanship., • Ability to distinguish colors accurately., • Ability to work independently and as part of a team in a manufacturing environment.Physical Requirements, • Ability to stand for extended periods., • Ability to lift and move materials safely., • Ability to work in a manufacturing and welding environment with exposure to heat, sparks, fumes, and industrial equipment. 3:00 PM - 11:30 PM Monday - Friday

Job DescriptionDescription: General Job Summary: Responsible for assembly/packing of sheet metal components of small or medium sized parts, fitting and/or adjustment of inter-related parts and/or assembly based on written specifications. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Follows all safety processes and procedures in accordance with job and Company requirements., • Following specific written instructions and/or blueprints, assembles components into finished product., • Disassembles and re-builds products per specifications., • Conducts quality checks following quality process instructions., • Pack and labels product following packaging instructions., • Ensures that the work area is clean, orderly, and safe., • Work in packaging as needed, including packing large assemblies or parts., • Inspect parts for defects or damage prior to packing., • Make boxes, apply labels, verify counts, and follow packing instructions., • Follow directions on packing from Packaging Lead., • Assists with other duties as assigned by supervisor/manager. Supervisory Responsibilities: None Requirements: Education High school diploma or general education degree (GED) Experience 2-4 years related experience or training or equivalent combination of education and experience. Other Requirements: Additional mechanical training and/or blueprint reading a plus. Ability to use hand tools such as screw drivers, sockets, Allen wrench, air drivers, tape dispenser and material handling equipment such as tow motor. Ability to read and understand blueprints, quality and packing instructions. Computer Skills: None required. Language Skills: Intermediate Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or Associates of organization. Mathematical Skills: Basic Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate. Reasoning Ability: Intermediate Skills: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Physical Demands: The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to sit; walk, stand for extensive periods of time, maneuver through the office and factory; use hands to finger, handle, or feel; reach with hands and arms; grasp and twist; talk or hear; and lift and/or or move equipment/product weighing up to 50 pounds. Utilize lift assist or work with another associate to lift anything greater than 50Ilbs. Must pass physical abilities test because of weight of assemblies being worked on. Work Environment: The work environment characteristics described here are representative of those an Associate encounter while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. The work environment may include humid conditions and extreme heat and cold. While performing the duties of this job the noise level in the work environment is usually loud.

$50 - $80/hourpayBuilding code knowledgePlan review and blueprint readingAbout micro1micro1 connects domain experts to the development of frontier AI models. Real-world expertise is turned into training data, evaluations, and feedback loops that improve how models perform. AI labs and enterprises use micro1 to train models and build reliable AI agents through advanced evaluations and reinforcement learning environments. Experts contribute directly to how AI systems learn, reason, and perform across domains like finance, healthcare, engineering, and more. Our platform identifies and vets top talent through an AI recruiter, enabling high-quality contributions at scale.Our goal is to enable 1 billion people to do meaningful work by applying their expertise to AI. We’ve raised $40M+ in funding, and our AI recruiter has powered over 1 million AI-led interviews as our global network of experts grows into the human intelligence layer for AI. Job Title: Building Code Compliance Expert Job Type: Contractor Location: Remote (US only) Job Summary: In this role, you'll apply your expertise to help train next-generation AI systems. Your work will shape how models learn, reason, and perform through high-quality, real-world input related to building codes, permitting, inspections, and construction compliance. Key Responsibilities: • Conduct reviews of architectural and engineering plans to assess building code compliance., • Interpret blueprints, permit documents, zoning requirements, and construction documentation., • Analyze code-related scenarios and provide clear compliance reasoning and recommendations., • Identify permitting issues, code violations, and regulatory concerns across residential and commercial projects., • Collaborate with architects, engineers, contractors, inspectors, and permitting teams to resolve compliance questions., • Deliver clear written reports and explanations related to code interpretation and compliance findings., • Support AI training projects by providing accurate, real-world building compliance expertise. Required Skills and Qualifications: • Demonstrated experience in building codes, permitting, inspections, zoning, or plan review., • Strong ability to read and interpret construction drawings and technical documentation., • Experience working with residential and/or commercial construction projects., • Strong analytical, problem-solving, and communication skills., • Ability to work independently and remotely while managing multiple assignments., • Experience collaborating with cross-functional project teams. Preferred Qualifications: • Relevant certifications such as ICC, NFPA, or state-issued licenses., • Experience working with city/county building departments or municipal permitting offices., • Experience in code enforcement, plan review, virtual inspections, or compliance consulting., • Background in architecture, engineering, construction management, or land use development.

Job Description Build, join, and perfect the pipelines behind advanced automation Work location: Rochester, NY Imagine stepping into a facility where each project is different—a custom skid this month, a specialized machine next. As a journeylevel piping pro at Re:Build Optimation, you’ll turn drawings into robust, reliable systems that keep our customers’ operations running. Backed by Re:Build Manufacturing’s technology‑forward platform and strong operations, your craft helps restore and grow American manufacturing. Your mission From first cut to final inspection, you own the quality of every joint: • Select and use the right tool for each cut—hand tools, pipe cutters, cutting torches, or a pipe cutting machine, • Assemble tubes, fittings, and non‑metallic attachments to print, • Execute joints via threading, soldering, brazing, or cemented connections, • Inspect piping and machinery to identify malfunctions before they become downtime, • Operate material handling equipment to lift and position pipe, supports, and heavy machinery safely, • Partner with engineers, designers, programmers, planners, PMs, and customers to align on scope and quality, • Live our safety culture—adhere to NFPA 70E; join toolbox talks and safety audits; stop and correct hazards, • Lead by example: mentor junior teammates and uphold high craftsmanship standards, • Pitch in on related duties to keep projects moving What it takes to succeed, • Hands‑on pipefitting background with blueprint reading, plumbing code knowledge, and trade math, • Precision mindset—detail orientation and accuracy, • Strong communicator who collaborates well with clients and cross‑functional partners, • Physically capable of climbing/working at heights, entering confined spaces, and lifting/moving heavy items, • Comfortable working in hot, cold, and all‑weather conditions, • English reading/writing; basic computer and communication proficiency, • Regular full‑time role on a 40‑hour day schedule; able to flex for overtime and occasional travel Growth and compensation We’ll challenge you with diverse builds and support you with coaching so you can expand responsibility fast. Pay range: $27.00–$55.00 per hour depending on education and experience; eligible for the annual bonus plan and long‑term incentive plan. We believe in shared success—every employee participates in ownership and benefits when the company wins. About us Re:Build Optimation designs and fabricates custom automated equipment and process skids in Rochester, NY. Our parent, Re:Build Manufacturing, unites industrial businesses to apply enabling technologies and superior operations, rebuilding the U.S. manufacturing base and creating lasting opportunities for our people and communities. We want to work with people that reflect the communities in which we operate Re:Build Manufacturing is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, veteran status, marital status, parental status, cultural background, organizational level, work styles, tenure and life experiences. Or for any other reason. Re:Build is committed to providing reasonable accommodations for qualified individuals with disabilities in our job application procedures. If you need assistance or an accommodation due to a disability, you may contact us at accommodations.ta@ReBuildmanufacturing.com or you may call us at 617.909.6275.

Beyond TalentEdge has a direct hire opportunity for an Electrical Mechanical Assembler. Our client is a leader in manufacturing and distribution. The Electrical Mechanical Assembler is responsible for the assembly of control panels. Assembler utilizes stock electrical and mechanical components to build custom panels per job instructions. Works with little or no supervision. Interaction with Technicians or Engineering Department may be required depending on complexity of the design. Responsibilities: • Build or assemble non-electrified and electrified components by following the specified directions from the job paperwork, • Required to test and initial electrified components for function, • Submit requests for replacement tooling or supplies, • Debug and trouble shoot electrical problems, • Complete inventory cycle counts as needed, • Ensure all documents are filled out completely, • All other duties as assigned by management Desired Skills and Qualifications: • High school diploma or equivalent required, • Must be able to pass truck and crane certification with training upon hire, • Computer knowledge of Microsoft Windows, Word, Excel, and other computer programs, • Ability to read tape measure, • Ability to read a blueprint, • Ability to use hand tools requiring dexterity, • Must be able to communicate effectively with factory supervision, • Work Environment:, • ADA Physical/Mental/Workplace Requirements, • Able to lift and/or move up to 50 pounds., • Able to stand (75%); walk (20%); stoop, kneel or crouch (5%), as required., • Able to climb portable ladders, • Able to wear safety glasses and foot protection throughout shift., • Able to wear hearing protectors (ear plugs) throughout the shift while working in an environment with moderate noise levels. Salary: $17.00 – $26.00 per hour “Beyond TalentEdge is an Equal Opportunity Employer. It is the policy of Beyond TalentEdge to provide equal opportunity in employment and conditions of employment to all individuals regardless of age, race, color, religious beliefs, national origin, sexual orientation, gender identity, sex, veteran or military status, disability, pregnancy-related condition, predisposing genetic characteristics, genetic information, marital status, familial status, prior arrest, domestic violence victim status, non-job related convictions, participation in lawful activities outside of our workplace, or any other status protected by law.”

About the Company Precision. Performance. Parlec. Parlec is a proud member of Techniks Tool Group, and has been a trusted name in American-made tooling solutions since 1948. We serve manufacturers across North America with innovative, productivity-boosting products designed to meet the highest standards of performance and reliability. 4 ten hour days with Friday off Air conditioned manufacturing floor Benefits offered include: Medical/Dental/Vision/401k match/Company paid Short Term and Long Term disability/Company paid Life insurance About the Role Set up and make world class parts in an efficient manner. Must be a dependable, team player. Intermediate to advanced blueprint reading with GD&T. Must have good tooling and machining background. Set up and make world class parts in an efficient manner. Must be a dependable, team player. Responsibilities • Set up and operate any CNC horizontal and vertical mills safely and productively., • Perform first piece and in-process inspections., • Load parts into machines., • Able to work independently., • Keep area neat and clean., • Ability to resolve issues with minimal supervision., • Responsible for deburring parts and keeping them ding free. Qualifications High School Diploma or equivalent. Minimum of two years machining experience and/or training; or equivalent combination of education and experience. Required Skills • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Preferred Skills • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists., • Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. We are committed to diversity and inclusivity.

About the Role: Are you an experienced project manager with a passion for construction, facilities optimization, and driving operational excellence? We are looking for a driven professional to join our Facilities Management group. In this dynamic role, you will be the driving force behind our building renovations, capital infrastructure improvements, and equipment installations. You will manage projects from cradle to grave, partnering with contractors and internal teams to support the expansion and relocation of our personnel and assets. If you are metric-driven, customer-focused, and excel in a fast-paced environment, we want you on our team! What You Will Do: • Full-Lifecycle Project Management: Oversee all phases of facilities projects, including requirement evaluation, estimating, scheduling, budget management, design oversight, and project close-out., • Contractor & Stakeholder Coordination: Effectively manage and partner with contractors, vendors, and cross-functional teams (including Facilities Maintenance and Operations) to meet program requirements., • Design & Compliance Support: Provide architectural design, construction management, and code compliance support., • Drive Efficiency: Champion value engineering, cost improvements, and process efficiencies using business operating systems., • Financial Oversight: Support the development of capital and expense budgets for the corporation., • Portfolio Management: Manage multiple projects simultaneously, ranging from large sole-responsibility initiatives to collaborative team efforts. What You Bring to the Table: • Education & Experience: Bachelor’s Degree in Engineering (or a related field) with 6+ years of experience, OR a Graduate Degree with 4+ years of prior related experience., • Technical Expertise: Strong background facilitating the design and execution of architectural, electrical, and HVAC systems. Experience with both Design-Build and Design-Bid-Build projects., • Software Proficiency: Hands-on experience with AutoCAD, MS Project, Estimating software, and Microsoft Office., • Blueprint Literacy: Ability to work confidently with engineering blueprints, process specifications, and building layouts., • Regulatory Knowledge: Deep understanding of applicable laws and codes, including OSHA, ADA, NFPA, NEC, EPA, and local Building Codes., • Clear Communication: Exceptional organizational, interpersonal, and communication skills to navigate a diverse and changing environment., • Clearance & Travel: Must have the ability to obtain a US security clearance and be willing to travel up to 30% as needed.

Job Description Job Summary: Works from given instructions, will run various manual and CNC lathe/mill machines. Essential Duties and Responsibilities: • Accountable for manufacturing complex parts., • Able to control product quality during production runs using calipers, dial bore gages, micrometers, etc., • Measure and work with tight tolerance in accordance with control plan and blueprint., • Good working knowledge of proper machine operation and safety., • Keeps work area clean and organized. Additional Responsibilities: • May be required to edit offsets at machine and/or change tools., • When requested, may work on special projects and various related assignments., • May be required to work in various areas of operations when necessary., • Performs other related duties and assignments as required. Physical Demands and Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel and must be able to stand for long periods of time. The employee is occasionally required to reach with hands and arms. The employee is required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 50 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from moderate to loud. Education, Skills and Experience: • Minimum of 2 years experience in a machine shop environment., • Familiar with G and M codes., • Ability to read and understand blueprints., • Good communication skills., • Must be a team player. This job description in no way states or implies that these are the only duties to be performed by this employee. He/she will be required to follow any other instructions and to perform any other responsible duties as requested by his/her supervisor. Syntec Optics is an Equal Opportunity/Affirmative Action Employer. Applicants are free to apply without regard to race, color, religion, sex/gender, gender identity, sexual orientation, marital status, pregnancy, genetic information, citizenship status, national origin, age, disability or veteran status or any other Federal or State legally protected classes. Read our EOE Policy Statement.

Successful completion of a 52-week probationary period as a Trades Specialist Electrician Trainee 1; OR completion of 45 hours of technical math coursework and 15 hours of blueprint reading/schematics coursework or passage of an equivalency exam or proof of successful completion of equivalent traini

Trades Specialist Electrician Trainee 2, NS (equivalent to SG-11):Successful completion of a 52-week probationary period as a Trades Specialist Electrician Trainee 1; OR completion of 45 hours of technical math coursework and 15 hours of blueprint reading/schematics coursework or passage of an equiv

Assembler Job Duties: Prepares work to be accomplished by studying assembly instructions, blueprint specifications, and parts lists; gathering parts, subassemblies, tools, and materials

Job Description General Job Description: Sets up and operates punch press including blanking, drawing, forming, perforating, etc. Controls proper safety devices, feeds the material into dies and keeps stock well lubricated. Procures proper dies, sets up punch presses and feeds for all types of materials. All types of dies may be set up including compound, multiple, closing, trimming, shearing, drawing, perforating, cut-off, shimmy, coining, extruding, etc. Minimum Qualifications: • Ability to read blue prints a must., • Fluency in verbal and written English, • Ability to use shop math, • High school diploma, GED or equivalent, • Must supply own tools Specific Duties: • Ensure Punch Press is in full operation during the required work hours, • Inspect material; checking for type and measuring dimensions using a micrometer and a QA tag., • Shear material using a “Traveler”, • Make the part according to specifications on dimension and quantity, • Measure blank or strip using measurement tape or dial caliper, • Use shearing machine as per drawing or instructions, • Set up the punch press (under supervision if necessary) and punch first part, • Ensure that inspection of first and last piece is done by operator and QA, • Run job and check parts using SPC, • Tumble parts and remove burrs, • Spot weld parts, if necessary, • Inspect part according to print, • Get QA approval of part., • Manufacture and inspect part to blueprint, • Upkeep daily preventative maintenance log Required Tool List: • 6” Verniers, • Tape Measure, • Ball Peen Hammer, • Set Allen Wrenches This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Blueprint Technologies is seeking a Technical Project Manager specializing in supply chain operations.

ROLE SUMMARY The Senior Health Data Analyst builds the data layer that powers Blueprint's Rural Health Transformation Program (RHTP) engagements. Integrate claims data, APCDs, HEDIS measures, BRFSS, PRAPARE, and other sources into Blueprint's analytic environment.

Blueprint-Technologies is seeking an Applications Engineer focused on analytics solutions.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

Social security and healthcare contributions Additional benefits aligned with local market practices Why Blueprint? Work on cutting‑edge AI systems Be part of a global, multilingual team Build highly transferable AI evaluation skills Contribute directly to improving real‑world AI experienc

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo