Trabajos cabling en Austin, TexasCrear alertas

Job Description Project Focus: Mission-critical, data center, and commercial development projects Job Type: Full-Time Pay: DOE (hourly) + per diem when applicable + benefits Location: Lubbock, TX Position Summary Trinity Fire & Technology is hiring an experienced Fire Alarm Technician to support mission-critical work where standards are higher and expectations are clear. This role is for a technician with 3 to 5 years of commercial fire alarm experience who can deliver clean, code-compliant installations, troubleshoot efficiently, and support testing and turnover in high-accountability environments. If you take pride in workmanship, documentation, and finishing strong, you’ll fit in here. Responsibilities • Install and terminate fire alarm raceway/cabling, devices, modules, and power supplies per drawings and specifications, • Support VESDA installation and commissioning readiness, including detector mounting, sampling pipe layout/assembly, labeling, basic verification, troubleshooting, and filter maintenance best practices, • Troubleshoot and resolve system issues, including ground faults, device troubles, NAC/SLC issues, power problems, and intermittent faults, • Support pre-testing, point-to-point, witness testing readiness, documentation, and turnover requirements common to data centers, • Maintain redlines and as-builts, daily reporting, and clean work areas, and coordinate with other trades, • 3 to 5 years of commercial fire alarm installation and/or service experience, • Ability to read drawings, follow specifications, and work from BIM/layout direction, • Strong troubleshooting skills and comfortable using test equipment for verification and diagnostics, • Data center or mission-critical experience, including turnover-driven schedules and documentation discipline, • Texas FAL (or ability to obtain quickly), • NICET I/II/III in Fire Alarm Systems, • Experience with major platforms, including Simplex/Autocall, Notifier, EST, or similar, • Competitive hourly pay (DOE), • Per diem on qualifying travel assignments, • Paid holidays and PTO, • Sign-on bonus for qualified candidates (paid per agreement/milestones), • Relocation assistance available for the right candidate, • Benefit options, training support, and a clear growth path into lead and foreman roles for top performersCompany DescriptionTrinity Fire & Technology is a privately owned, rapidly expanding life-safety and technology contractor built for mission-critical delivery, with a major focus on data centers and other high-reliability facilities across West Texas and beyond. We are actively executing 85+ projects, supporting a 2,700+ client base, and monitoring 600+ accounts. That means steady work, real opportunity, and a team scaling fast with momentum you can feel. We are an Autocall and ANSUL dealer, and we self-perform the work that separates professionals from “device hangers.” Our teams deliver complete, accountable systems across fire alarm, suppression, and special hazards from design-assist and design-build support through submittals, procurement, installation, programming, testing, acceptance, commissioning support, and clean turnover. The goal is not to “get it in.” The goal is to deliver systems that pass, perform, and close out right the first time. What We Do Fire Alarm (Autocall platform): new construction, tenant improvements, service, inspections, troubleshooting, complex integration Suppression and Extinguishing Systems (ANSUL dealer): design, installation, inspection, service, recharges, repairs, and clean compliance documentation for kitchen hood, dry chemical, and Class A systems VESDA and Aspirating Detection (Xtralis): high-sensitivity early warning detection for data halls, electrical rooms, and critical infrastructure Special Hazards and Releasing Interfaces: pre-action releasing and sequence support, shutdown logic, aborts, and testing coordination (project-dependent) Gas Detection: monitoring and integration for mission-critical environments (project-dependent) Mission-Critical Integration: shutdown sequencing (CRAH/HVAC), relays, owner platform tie-ins, BMS/EPMS coordination, centralized monitoring (project-dependent) ERCES, BDA, DAS: public safety radio compliance support and in-building coverage solutions Integrated Low-Voltage: CCTV, access control, structured cabling, and A/V when it supports the client’s broader technology ecosystem Why High Performers Choose Trinity Mission-critical work is different, and that is exactly why the best technicians want it. You will operate at a higher standard with a commissioning mindset, disciplined documentation, and real accountability. If you want to sharpen your craft, this is the environment that will do it. You can build a specialty here and become harder to replace every year. Suppression, VESDA, releasing and shutdown sequencing, ERCES, integrated security, complex troubleshooting, high-level closeout. We put high performers on work that grows their value, not busywork that burns them out. We believe growth should be real, not promised. We invest in licensing and certifications and promote based on capability. If you perform, you will not be stuck behind layers of corporate red tape. Foreman, lead technician, field leadership, coordination, PM track. There is room to move and we are moving fast. Benefits Trinity offers competitive pay with performance-based bonuses and a benefits package designed for long-term stability. Depending on role and eligibility, this may include health, dental, and vision insurance, a 401(k) with company match (up to 3%), paid time off, and paid holidays. For qualifying field positions, we provide the tools to do the job right, which may include a company vehicle, phone, and laptop or tablet. Relocation assistance may be available for the right candidates. The Culture At Trinity, we keep it simple and we take it seriously. We do what we say we will do, we build it right the first time, and we document it clean because that is what separates real professionals from everyone else. We treat customers, general contractors, engineers, and AHJs with respect, and we protect our reputation by showing up prepared, communicating clearly, and finishing strong. Internally, we take care of our people. You will be supported by a team that answers the phone, solves problems, and has your back in the field. Expectations are clear, and training is not lip service. If you bring effort, integrity, and pride in your craft, you will earn more responsibility, better opportunities, and a real path into leadership on high-visibility projects in one of the most demanding segments of the industry.Trinity Fire & Technology is a privately owned, rapidly expanding life-safety and technology contractor built for mission-critical delivery, with a major focus on data centers and other high-reliability facilities across West Texas and beyond. We are actively executing 85+ projects, supporting a 2,700+ client base, and monitoring 600+ accounts. That means steady work, real opportunity, and a team scaling fast with momentum you can feel.\r\n\r\nWe are an Autocall and ANSUL dealer, and we self-perform the work that separates professionals from “device hangers.” Our teams deliver complete, accountable systems across fire alarm, suppression, and special hazards from design-assist and design-build support through submittals, procurement, installation, programming, testing, acceptance, commissioning support, and clean turnover. The goal is not to “get it in.” The goal is to deliver systems that pass, perform, and close out right the first time.\r\n\r\nWhat We Do\r\n\r\nFire Alarm (Autocall platform): new construction, tenant improvements, service, inspections, troubleshooting, complex integration\r\n\r\nSuppression and Extinguishing Systems (ANSUL dealer): design, installation, inspection, service, recharges, repairs, and clean compliance documentation for kitchen hood, dry chemical, and Class A systems\r\n\r\nVESDA and Aspirating Detection (Xtralis): high-sensitivity early warning detection for data halls, electrical rooms, and critical infrastructure\r\n\r\nSpecial Hazards and Releasing Interfaces: pre-action releasing and sequence support, shutdown logic, aborts, and testing coordination (project-dependent)\r\n\r\nGas Detection: monitoring and integration for mission-critical environments (project-dependent)\r\n\r\nMission-Critical Integration: shutdown sequencing (CRAH/HVAC), relays, owner platform tie-ins, BMS/EPMS coordination, centralized monitoring (project-dependent)\r\n\r\nERCES, BDA, DAS: public safety radio compliance support and in-building coverage solutions\r\n\r\nIntegrated Low-Voltage: CCTV, access control, structured cabling, and A/V when it supports the client’s broader technology ecosystem\r\n\r\nWhy High Performers Choose Trinity\r\n\r\nMission-critical work is different, and that is exactly why the best technicians want it. You will operate at a higher standard with a commissioning mindset, disciplined documentation, and real accountability. If you want to sharpen your craft, this is the environment that will do it.\r\n\r\nYou can build a specialty here and become harder to replace every year. Suppression, VESDA, releasing and shutdown sequencing, ERCES, integrated security, complex troubleshooting, high-level closeout. We put high performers on work that grows their value, not busywork that burns them out.\r\n\r\nWe believe growth should be real, not promised. We invest in licensing and certifications and promote based on capability. If you perform, you will not be stuck behind layers of corporate red tape. Foreman, lead technician, field leadership, coordination, PM track. There is room to move and we are moving fast.\r\n\r\nBenefits\r\n\r\nTrinity offers competitive pay with performance-based bonuses and a benefits package designed for long-term stability. Depending on role and eligibility, this may include health, dental, and vision insurance, a 401(k) with company match (up to 3%), paid time off, and paid holidays. For qualifying field positions, we provide the tools to do the job right, which may include a company vehicle, phone, and laptop or tablet. Relocation assistance may be available for the right candidates.\r\n\r\nThe Culture\r\n\r\nAt Trinity, we keep it simple and we take it seriously. We do what we say we will do, we build it right the first time, and we document it clean because that is what separates real professionals from everyone else. We treat customers, general contractors, engineers, and AHJs with respect, and we protect our reputation by showing up prepared, communicating clearly, and finishing strong.\r\n\r\nInternally, we take care of our people. You will be supported by a team that answers the phone, solves problems, and has your back in the field. Expectations are clear, and training is not lip service. If you bring effort, integrity, and pride in your craft, you will earn more responsibility, better opportunities, and a real path into leadership on high-visibility projects in one of the most demanding segments of the industry.

Job Description Job description Overview: We are seeking a skilled Low Voltage Technician to join our team. The ideal candidate will have expertise in low voltage cabling, computer networking, audio video, and security cameras. You will have the opportunity to learn computer networks and troubleshooting techniques to broaden you technical career. Responsibilities: • Install, terminate, maintain, and repair low voltage systems including audio, video, and data, phone networks, • Perform cabling and wiring installations for various systems, • Troubleshoot and diagnose issues with low voltage equipment, • Ensure compliance with NEC (National Electrical Code) standards, • Collaborate with team members to complete projects efficiently, • Test and configure computer hardware components, • Provide technical support for technical staff Qualifications: • Proficiency in low voltage systems and low voltage electrical work, • Knowledge of computer networking and telecommunication systems, • Mechanical aptitude for handling various tools and equipment, • Familiarity with Ethernet testing equipment, volt meters, cable tester, • Experience in working with fiber, access control, alarm systems is a plus If you are a detail-oriented individual with a passion for low voltage technology and possess the required qualifications, we encourage you to apply for this exciting opportunity. Company DescriptionAt our company, we value integrity, professionalism, and a passion for technology. We are dedicated to providing top-notch customer service, understanding our clients' unique needs, and delivering tailored solutions that exceed their expectations.At our company, we value integrity, professionalism, and a passion for technology. We are dedicated to providing top-notch customer service, understanding our clients' unique needs, and delivering tailored solutions that exceed their expectations.

Job Title: Data Center Technician Location: Austin, Texas Experience Level: 5+ Years Travel: Occasional (as needed) Overview: We are seeking an experienced Data Center Technician with 5+ years of hands-on experience to support data center operations in Austin, Texas. The ideal candidate will have strong technical troubleshooting skills, experience with enterprise infrastructure environments, and the ability to travel occasionally to support additional sites or project deployments. Key Responsibilities: • Install, configure, and maintain servers, storage, and network hardware, • Perform rack and stack, structured cabling, and hardware deployments, • Troubleshoot hardware, connectivity, and power/cooling issues, • Support incident response and resolve break/fix tickets within SLAs, • Conduct preventative maintenance and routine inspections, • Manage hardware inventory, asset tracking, and documentation, • Coordinate with network, systems, and security teams on infrastructure changes, • Assist with data center migrations, upgrades, and expansions, • Ensure adherence to safety, compliance, and security protocols Required Qualifications: • 5+ years of experience in a data center or enterprise IT infrastructure environment, • Strong knowledge of server hardware (Dell, HPE, Cisco, etc.), • Experience with structured cabling (copper & fiber), • Familiarity with networking fundamentals (TCP/IP, switches, routers), • Experience working with ticketing systems and change management processes, • Ability to lift up to 50 lbs and work in a physically demanding environment, • Strong documentation and communication skills Preferred Qualifications: • CompTIA A+, Network+, or similar certifications, • Experience with virtualization environments (VMware, Hyper-V), • Experience supporting cloud-connected or hybrid infrastructure environments Travel: Occasional travel (up to 10–20%) to support regional deployments or project-based work.

Job DescriptionQuantiq specializes in high frequency derivatives trading in the largest markets worldwide. Our approach is rigorous and pragmatic, driven by technological expertise and analytics informed by real-world experience. We value employees who love to learn and have the tenacity, curiosity and willpower to contribute to our continuing success. We are a small but passionate team, dedicated to enhancing and refining our tried and true methods as we commit to our ongoing growth and performance. Quantiq runs considerable "in-house" infrastructure (IPA realm) consisting of 50-100 computers ranging from high performance servers and varied datacenter hardware (switches, FPGAs, fiber optic cabling), to desktop computers with dedicated GPUs and an array of monitors and peripherals across offices. We control the majority of the stack and create, maintain, update, and monitor a variety of systems to keep the companys trading running smoothly. Our hardware infrastructure operates entirely on Fedora Linux and incorporates significant first- and third-party software requiring occasional maintenance. This complete infrastructure has high uptime requirements to support our critical trading operations. Job Description: As an IT Operations Engineer, you will be responsible for managing and maintaining the core IT infrastructure, ensuring that systems run smoothly and are consistently optimized. This role requires a mix of technical skills and the ability to troubleshoot a range of hardware, network, and software issues. You will work closely with both the Technical and Operations teams to provide support, implement solutions, and contribute to the overall success of our IT operations. If the following resonates with you, we would love to welcome you to our team. Job Responsibilities: • Monitor, maintain, and optimize IT infrastructure, including servers, networks, storage, and databases, • Oversee the full system lifecycle, including provisioning, installation, configuration, asset management, monitoring, maintenance, and decommissioning of various systems, • Work with vendors to procure and deploy new hardware, • 5+ years of experience in IT operations, systems engineering, or a related role, • Strong knowledge of networking protocols and tools (TCP/IP, DNS, DHCP, VPN), • Familiarity with scripting and automation tools (e.g., Bash, PowerShell, Python), • Exceptional capability debugging and solving complex issues related to both hardware, low level software, and networking, • -Knowledge of network architectureExcellent organizational skills and attention to detail in fast-paced environment, • Strong written and verbal communication skills, • You excel at diagnosing and resolving complex technical issues across hardware, software, and network layers, • You enjoy learning and working with new technologies and platforms, • You have experience with command-line tools for troubleshooting and system management (e.g., Bash, PowerShell), • You feel at home scripting and automating tasks, • You understand and can configure networking protocols (TCP/IP, DNS, DHCP) Attach the file in the "Cover Letter" section.

Job DescriptionWe are excited to announce we are expanding and looking to grow our team with a new Tier 1, Help Desk Support Technician! Our Company Culture: Our diverse workforce allows Centre to develop and leverage knowledge, skills, and experiences that impact our overall success. Within our collaborative environment, our team of consultants work to identify innovative solutions for our clients. Together, we guide our clients through the process of selecting, deploying, and managing IT solutions tailored to their specific business needs. Centre Company Benefits: • Hybrid Work Options, Paid Time Off, and Paid Holidays, • Medical, Dental, Vision, and 401(k) with employer match contributions, • Problem management and escalation of issues in a timely manner, • Prioritization of tasks and meeting of deadlines, excellent time management skills, • Excellent troubleshooting and assessment skills, • Excellent written/verbal communication skills, • Must be a team player with outstanding customer service skills, • Entry of time sheets, expense reports and documentation on or before deadline, • Keep up-to-date on market trends, theory and new ways of doing things; embrace change, • Assist with change-management activities, • Prepare and deliver complete and concise documentation for all projects, • Present progress reports to immediate supervisor and or Project Manager (if so assigned), • Help turn business problems into technical solutions, • Manage deployment of equipment in compliance with established technology policies., • Participate in after-hours on-call schedule serving as initial level of escalation for compute, storage, backup, automation and virtualization issues.Education/Experience/Certifications, • 2+ years experience in IT related study or field., • Must possess basic knowledge and experience with:, • Windows 7/8/10, • Microsoft Office suite, • Microsoft Windows Administration tools (AD Users and Computers, DHCP, DNS, Group Policy, Sites and Services, etc.), • Understanding of basic network concepts, • Understanding of application, desktop, and server virtualization, • Understanding of Desktop Deployment / Imaging, • Bachelor’s Degree a plus Desired Experience/Certifications, • Certifications, • CompTIA A+ Certification a plus, • MDAA, MCSA, • Windows Server 2008/ 2012/ 2016, • Microsoft Office 365 Admin portal, • Understanding of File Permissions (NTFS & Sharing), • High School Degree required, • Associate's Degree or higher preferredWork Environment and Physical Demands, • Work primarily in a climate-controlled environment with minimal safety/health hazard potential., • Occasional lifting (up to 50 pounds and occasionally lift and/or move up to 50 pounds) may be required, • Reasonable accommodations can be made to enable individuals with disabilities/injuries to perform the essential functions of this role., • The noise level in the work environment is moderate. ct7Fn33LOj

Job Description OUR COMPANY: EOS IT Solutions is a global technology and logistics company, providing Collaboration and Business IT Support services to some of the world's largest industry leaders, delivering forward-thinking solutions based on multi-domain architecture. Customer satisfaction and commitment to superior quality of services are our top business priorities, along with investing in and supporting our partners and employees. We are a true international IT provider and are proud to deliver our services through global simplicity with trusted transparency. WHAT YOU WILL DO: As a Network Field Technician - Tier 1, you will support the deployment and maintenance of networking hardware and infrastructure at customer sites around the world. Working under the guidance of experienced engineers and project managers, you will play a key role in helping ensure successful onsite installations, upgrades, and troubleshooting. This is an excellent opportunity for someone looking to build a career in network infrastructure and field support while gaining hands-on experience in diverse environments. KEY RESPONSIBILITIES: • Assist with the installation, racking, and cabling of network hardware (routers, switches, access points, etc.)., • Run and terminate copper and fiber optic cabling under supervision., • Conduct basic troubleshooting of physical connectivity issues., • Follow detailed instructions, network diagrams, and equipment layouts to perform installations accurately., • Support Wi-Fi survey teams with setup and equipment handling., • Perform equipment labeling, documentation, and site clean-up post-deployment., • Collaborate with project teams and escalate issues as needed., • Assist with site readiness surveys (e.g., rack space, power, cabling paths)., • 1–2 years of experience in IT, networking, field service, or a related technical role (internships and school programs considered)., • Basic understanding of networking hardware and cabling types (Cat5e/6, fiber)., • Ability to follow instructions and work well in a team setting., • Strong attention to detail, time management, and willingness to learn., • Comfortable using hand tools and working with hardware in various environments., • Ability to lift up to 50 lbs and work in physically active roles., • Willingness and ability to travel both domestically and internationally., • Relevant certifications (CompTIA Network+, CCT, or equivalent) or working toward certification., • Familiarity with networking concepts (IP addressing, ports, patching)., • Experience working in structured cabling, telecom, or data center environments. EOS is committed to creating a diverse and inclusive work environment and is proud to be an equal opportunity employer. We invite you to consider opportunities at EOS regardless of your gender; gender identity; gender reassignment; age; religious or similar philosophical belief; race; national origin; political opinion; sexual orientation; disability; marital or civil partnership status or other non-merit factor. #LI-MS2 #Remote

Job Description We are excited to announce we are expanding and looking to grow our team with a new Tier 1, Deskside Support Technician! Our Company Culture: Our diverse workforce allows Centre to develop and leverage knowledge, skills, and experiences that impact our overall success. Within our collaborative environment, our team of consultants work to identify innovative solutions for our clients. Together, we guide our clients through the process of selecting, deploying, and managing IT solutions tailored to their specific business needs. Centre Employee Benefits: • Paid Time Off, and Paid Holidays, • Medical, Dental, Vision, and 401(k) with employer match contributions The primary role for this position would be focused on implementing and supporting various IT Infrastructure technologies as mentioned below with an emphasis on matter resolution, on-boarding of new clients, racking, cabling, installation and removal of hardware, verbose documentation of projects or tasks, and other duties as assigned. To be considered for this position, please complete the 3-5 minute behavior assessment: Centre Technologies Online Assessment Education/Experience/Certifications • 2+ years experience in IT-related study or field., • Must possess basic knowledge and experience with:, • Windows 7/8/10, • Microsoft Office suite, • Microsoft Windows Administration tools (AD Users and Computers, DHCP, DNS, Group Policy, Sites and Services, etc.), • Understanding of basic network concepts, • Understanding of application, desktop, and server virtualization, • Understanding of Desktop Deployment / Imaging, • Certifications, • CompTIA A+ Certification a plus, • MDAA, MCSA, • Windows Server 2008/ 2012/ 2016, • Microsoft Office 365 Admin portal NDnm4IwTJI

Job DescriptionSalary: Who we are Over 600 employees strong, Asure sees Human Capital Management (HCM) through the lens of entrepreneurs and executives with an owners mentality. We help businesses develop their Human Capital to get to the next level, stay compliant, and allocate their time, money and technology toward growth. Our HCM platform empowers more than 100,000 clients to build great teams and better manage their people while staying compliant in an ever-changing HR legislative landscape. Asures HCM offering includes Payroll & Tax, HR, and Time & Attendance software and HR Services ranging from online compliance tools to a fully outsourced HR department. This is an on-site position located at our Austin, TX location. How you will contribute The IT Support Specialist serves as the primary point of contact for staff seeking technical support, overseeing troubleshooting, maintenance, account creation, and the configuration of workstations, printers, and associated hardware and software. Responsibilities include providing remote assistance and liaising with third-party vendors as necessary. This role may require availability outside of standard business hours to ensure executive meeting support. What Youll Do • Provide rapid, hands-on support for IT, mobile devices, A/V systems, and software, particularly during meetings., • Provide setup and live support for board meetings, virtual conferences, and town halls., • Handle onsite and remote technical support cases through phone, email, and ticket submission., • Create and maintain technical documentation., • Install, configure, and troubleshoot operating systems and applications., • Diagnose hardware problems with A/V systems, workstations, and printers., • Identify root causes of technical problems, including network, hardware, and cabling issues., • Administer M365, ensuring reliable operations, security, and performance across Exchange, SharePoint, Teams, OneDrive, and related services., • Manage user accounts, group permissions, and license assignments., • Maintain and support network infrastructure including switching, firewalls, and wireless equipment. What Were Looking For • Bachelors degree in computer science or related field and/or relevant professional experience., • Must be legally authorized to work in the United States without the need for employer sponsorship, now or at any time in the future., • Strong understanding of Microsoft 365 to include Exchange, SharePoint, Teams, OneDrive, Entra, and Intune., • Proficient knowledge of setting up A/V equipment., • Excellent written and oral communication skills., • Deliver top-tier technical support to the C-level team., • Occasionally work outside of normal business hours to be the technical contact for executive meetings., • The employee is frequently required to stand, walk, and to reach with hands and arms Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Benefits • Medical, Dental, Vision, HSA, FSA- All effective on day 1!, • Company paid Basic Life Insurance, A+D, Long-Term Disability, and Short-Term Disability, • 401K Program with 3% safe harbor contribution, • Employee Stock Purchase Program, • Fitness Reimbursement Program, • Self-Managed PTO Our Mission To provide Human Capital Management (HCM) software and services that help companies grow, while nurturing a culture of growth around us. • Helping our employees grow personally and professionally., • Helping customers grow by getting the most from their human capital., • Growing relationships in our communities that inspire goodness., • Do all of these things in a way that grows shareholder value. Our Vision Be the most trusted Human Capital Management resource to entrepreneurs everywhere. OurValues Reflect who we are and what we stand for as a company. • Embrace Change, • Lead with Integrity, • Own the Outcome, • Deliver Awesome, • Be a Good Human We are an equal opportunity employer. All candidates must be legally authorized to work in the US, as we are unable to sponsor or transfer Visas at this time. NO AGENCIES PLEASE Any unsolicited resumes sent to Asure Software from a third party, such as an Agency, including unsolicited resumes sent to Asures mailing address, fax machine or email address, directly to employees or hiring managers will be considered Asure property. Asure will not pay a fee for any placement resulting from the receipt of an unsolicited resume.

Job Description Field Specialist Full Time, Salary Job Family: HQ Support Location: Austin, TX - HQ Reports to: Why Join Crunch Fitness – Undefeated Tribe? We’re not just opening gyms, we’re building communities. Undefeated Tribe is the fastest-growing Crunch Fitness franchise group in the nation, proudly expanding across Texas, Oklahoma, New Mexico, Missouri, and Minnesota. Twice named Franchise of the Year (2021 & 2024), we’re on a mission to transform lives through fitness, wellness, and connection. With 100+ clubs planned by 2028, there’s never been a better time to grow your career with us! Here’s why you’ll love being part of the Tribe: Bold, High-Energy Culture At Crunch Fitness, Undefeated Tribe, you’re not just an employee, you’re part of a team that thrives on hustle, creativity, and collaboration. We celebrate individuality and want voices like yours at the table. Unbeatable Perks Competitive pay, career advancement opportunities, and yes, a free Crunch Fitness membership. You’ll work in an environment built around health, strength, and community. Unlimited Growth With our rapid expansion, opportunities are everywhere. We invest in our people, promote from within, and give you the tools to level up your career faster than ever. Join the Tribe. Find Your People. Build Your Future. Position Overview We are looking for a Field Specialist who will own the on-site readiness of new Crunch Fitness clubs in the critical final weeks after opening. In this role, you will be the bridge between Construction and Operations—verifying that all building systems, owner-supplied equipment, and infrastructure are fully operational and member-ready for Day 1. You will spend most of your time in the field, working hands-on with GCs, subcontractors, vendors, and the NCO team to commission systems, troubleshoot issues in real time, and close any final gaps that could impact the opening experience. This person is a versatile multiskilled professional, capable of handling a broad range of maintenance, repair and installation tasks during and throughout the New Club Opening process. What You’ll Do: The Field Specialist is responsible for executing a flawless turnover of new Crunch Fitness clubs from Construction to Operations. This role ensures all building systems, owner-supplied equipment, and critical infrastructure are fully operational and ready for Day-1 member use. You serve as the on-site construction-to-operations specialist during the final three weeks of each project, working hands-on with the GC, subcontractors, owner vendors, and NCO team to complete commissioning, resolve issues, and prepare the club for a seamless opening. This position requires extensive travel, a high degree of independence, strong technical skills, and the ability to problem-solve in real time. What Success Looks Like: • Opening Day Readiness: All systems operational with minimal post-opening issues., • Timeliness of Turnover: All checklist items completed within project schedule., • Documentation Accuracy: Clear, complete, and timely turnover documents., • Operations Satisfaction Score: Positive feedback from NCO teams on readiness and support., • White Glove Turnover: Clubs are handed over in pristine, “grand-opening ready” condition, with systems, equipment, and details exceeding operations’ expectations., • High Level Problem-Solving: Issues in the field are anticipated or resolved quickly with minimal escalation, keeping openings on track without disrupting timelines or member experience About You: • Highly organized, detail-oriented, and comfortable managing multiple projects, stakeholders, and deadlines in a fast-paced, sometimes high-pressure environment., • A strong communicator who can confidently interact with internal leaders, external partners, and vendors in both written and verbal formats., • A collaborative team player who enjoys supporting others, solving problems, and improving processes to make work more efficient and predictable., • Tech-savvy and eager to use project management and collaboration tools to keep information clean, current, and accessible. Responsibilities: Systems Readiness & Commissioning • Lead system commissioning using defined checklists and documentation templates., • Identify deficiencies, troubleshoot issues directly, and perform hands-on fixes when possible., • Fill operational gaps to ensure a flawless turnover and member-ready experience.Collaboration & On-Site Leadership, • Work alongside the General Contractor, Owner Vendors, Subcontractors, and NCO team as the on-site readiness specialist., • Maintain constant communication with construction leadership on status, risks, and required actions., • Float between sites as needed to support multiple active projects.Training, Documentation & Handover, • Complete all checklists, sign-offs, and turnover documentation accurately and on time., • Train club staff and operations leaders on new systems, equipment use, and troubleshooting basics., • Provide clear, concise turnover materials to operations to support day-one and first-month success. Required Qualifications: • Background in construction, facility maintenance, or general building trades., • Ability to perform light finish work (e.g., paint, drywall touchups)., • Strong mechanical and technical aptitude across HVAC, electrical, plumbing, Low voltage, A/V installation, • Comfortable with hands-on problem-solving and independent decision-making., • Ability to interpret construction drawings, equipment manuals, and MEP layouts., • Strong communication skills with GCs, trades, and operations teams., • Excellent follow-through and attention to detail. Preferred Experience • Experience opening or maintaining fitness centers, retail stores, hospitality, or similar facilities., • Understanding of low-voltage/IT systems (switches, routers, cabling, POS or access control)., • Procore proficiency; additional construction software experience preferred., • OSHA 10/30 or technical certifications (HVAC, low voltage, etc.) are a plus but not required. Travel: • 100% travel, typically on-site for the final three weeks of each project., • Travel costs covered; role includes a car allowance., • Work evenings or weekends as required by construction schedule and project deadlines. Benefits • Salaried Flexible PTO, • Paid Holidays, • Subsidized health insurance coverage (health, dental, vision) for full time positions, • Employer Paid Basic Life and AD&D, • HSA, • Short-term disability, • Voluntary Supplemental Life Insurance for employee, child, and spouse, • Free gym membership EQUAL OPPORTUNITY EMPLOYER UDT is an Equal Opportunity Employer, a drug-free workplace, and complies with ADA regulations as applicable. UDT provides equal employment opportunities to all employees and employment applicants and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Please note that Crunch Fitness - Undefeated Tribe does not offer visa sponsorship or support visa transfers for this position. Applicants must be authorized to work in the United States without the need for current or future visa sponsorship. At Crunch Fitness - Undefeated Tribe, we are always on the lookout for exceptional talent to join our team. Some of the roles listed are part of our evergreen hiring strategy, meaning we consistently seek to build a pipeline of qualified candidates. While not all positions may be actively hiring at this time, we encourage you to apply if the role aligns with your career goals. Your application will be considered as opportunities become available. Join us in making Crunch Fitness the talk of the town! Apply now and be a driving force in transforming lives through fitness.

Job DescriptionDescription: Who We Are Acumera is now Scale Computing! Scale Computing is a global leader in edge computing, hyperconverged infrastructure, and managed networking solutions. We deliver innovative, secure, and scalable technology that powers critical operations worldwide. We’re a growing company looking for motivated professionals to join our team! What We’re Looking For The Deployment Technician is responsible for executing scheduled nightly installations and migrations for Acumera’s customers. This role ensures deployments are completed efficiently, accurately, and fully documented in coordination with the U.S. deployment and vendor teams. Requirements:Responsibilities • Execute nightly installations and hardware migrations following Scale’s deployment SOPs., • Communicate directly with field vendors and technicians to coordinate site activities., • Validate network connectivity, VPN tunnel health, and device registration in our proprietary network management tool., • Update all deployment tickets in JIRA with accurate time, activity, and completion notes., • Report incomplete tasks or issues to the Senior Deployment Specialist for escalation., • Participate in end-of-shift handoff documentation in Slack., • Follow detailed checklists for each customer deployment type (restaurant, convenience store, retail locations), • Ensure quality and consistency across every deployment., • Support cross-training and peer mentoring to maintain team flexibility. Qualifications, • Associate degree or diploma in Networking, Information Systems, or equivalent experience., • 2–3 years of experience in IT deployment, helpdesk, or NOC operations., • Familiarity with network devices (routers, firewalls, switches) and structured cabling., • Experience with Firewalls, JIRA, Confluence, and Network management tools preferred., • Excellent attention to detail, communication, and documentation accuracy. Group medical insurance. Casual dress code. Hybrid Work schedule Paid company holidays. Cab Facilities. Fully stocked snacks at office. Vibrant and Inclusive Workplace Atmosphere. Flexible work environment and an opportunity to grow as we grow. Scale Computing is an equal opportunity employer. The final candidates will be subject to a pre-employment background check.

Job Description We are helping our client find a detail-oriented Hardware Integration Technician (Autonomous Systems) to join its team responsible for assembling, installing, and maintaining the complex sensor systems, computing modules, and support hardware that power our autonomous platforms. In this role, you will be at the intersection of automotive and consumer electronics, perfect for those who can fix an iPhone and build a workstation from parts. You will be able to blend skills from IT hardware assembly, electronics repair, and automotive integration. Rate: $22 to $30 per hour As a Hardware Integration Technician, you'll: • Build and install computer systems, sensors, and peripheral modules into vehicles., • Identify and fix hardware issues—whether it’s a faulty cable, a misconfigured BIOS, or a misaligned sensor., • Swap out and upgrade CPUs, GPUs, RAM, SSDs, and sensor modules as needed., • Manage neat and functional internal cabling (USB, Ethernet, CAN, power, video)., • Assist with basic BIOS/UEFI configuration and driver installation., • Test system functionality, verify connections, and apply ESD-safe practices. What You’ll Need Computer Hardware Experience: • Ability to assemble, upgrade, and troubleshoot desktops, laptops, or similar systems., • Basic Electronics Repair Skills: Comfort replacing screens, batteries, logic boards, and diagnosing electrical issues., • Familiarity with Sensors & Peripherals: Understanding of ports, connectors, and common sensor types (USB, Ethernet, CAN, etc.)., • Hands-On Assembly Skills: Precision and care when mounting and wiring hardware in confined spaces., • Troubleshooting Mindset: Strong problem-solving ability with basic knowledge of system-level debugging., • Attention to Detail: High standards for build quality, neatness, and reliability., • Basic Electrical Safety Knowledge: Use of ESD protection, safe handling of PSUs and power cabling., • Teamwork & Initiative: Able to work independently while communicating clearly within a multidisciplinary team. Benefits • Pre-tax commuter benefits, • Employer-subsidized healthcare benefits, • Flexible Spending Account for healthcare costs, • All costs covered for short- and long-term disability and life insurance, • 401k package Commitment: This is a full-time, ongoing contract position, open to candidates local to the Austin area. contract position, open to candidates local to the Austin, TX area.

Job Description At P. Terrys Burger Stand, we pride ourselves on serving high-quality burgers and fries using the freshest ingredientsall while creating a warm, welcoming experience for both our guests and employees. Behind the scenes, our IT team ensures that operations run smoothly across 41+ burger stands, a commissary, and our Home Office, keeping our technology, network infrastructure, and IT services in top shape. We are currently seeking an experienced IT Support Tech II with a background in the restaurant industry to join our team and provide advanced technical support to our staff and locations. What Youll do • Serve as a senior-level technical resource, providing advanced troubleshooting and support for IT-related issues, including hardware, software, and network problems., • Diagnose and resolve complex technical issues related to POS systems, restaurant management software, network connectivity, printers, and other restaurant-specific technologies., • Collaborate with IT Support Techs and IT Specialist to ensure timely resolution and appropriate escalation of high-priority issues., • Create and maintain thorough documentation, including incident reports, problem reports, troubleshooting steps, permanent solutions, and knowledge base articles within our ITSM., • Assist in the design, implementation, and management of IT infrastructure projects, such as system upgrades, network expansions, and security improvements., • Train and mentor junior IT support staff, sharing knowledge and best practices to promote professional development and continuous improvement within the team., • Monitor and analyze IT systems and networks for performance, stability, and security issues, recommending and implementing improvements as needed., • Collaborate with vendors and partners to ensure effective support, maintenance, and integration of third-party technologies., • Stay current with emerging technologies, industry trends, and best practices related to restaurant IT systems., • Perform other IT-related tasks and projects as assigned.What You Bring (Qualifications & Skills), • Associate or bachelors degree, in technology, • A minimum of 3 years of experience in IT support within the restaurant industry is preferred., • Relevant professional certifications (e.g., A+, Network+, Security+, ITIL 4 Foundations, ITIL 4 Create, Deliver, and Support) are a plus, • If no bachelors degree, then 3+ years of tech experience with relevant professional certifications: CompTia A+, Network+, Security+, ITIL 4 Foundations, ITIL 4 Create, Deliver, and Support, CCNA, CCNP, Fortinet Certifications, Microsoft Certifications, etc., is required, • Advanced knowledge of restaurant-specific hardware and software, such as POS systems, kitchen display systems, and restaurant management application is preferred., • Familiarity with Windows, macOS, and mobile operating systems, as well as common desktop and productivity applications., • Excellent problem-solving and troubleshooting skills, with the ability to diagnose and resolve complex technical issues in a timely manner., • Strong communication and interpersonal skills, with the ability to explain advanced technical concepts to both technical and non-technical users., • Ability to work independently and as part of a team, managing multiple tasks and priorities effectively., • A valid driver's license and reliable transportation for on-site support, as needed., • Ability to work non-traditional hours, including late nights, overnights, weekends, holidays, and long travel time as needed. Work Environment and Physical Demands, • Schedule: Monday Friday, 8:30 AM 5:00 PM, with flexibility for early mornings, late nights, weekends, and travel for projects and new stand openings., • Ability to give and receive detailed information through oral communication (frequently required to talk and hear) and have specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus., • Frequently required to sit and/ or stand for an extended period of time (7+ hours), look at a computer screen for an extended period of time, be on the phone for extended periods of time, use hands and fingers to handle, feel, or operate a computer, tools or controls, and reach with hands and arms., • Ability to walk, climb, and bend for long periods of time., • Must be able to lift up to 50 lbs and work on-site as needed (including hands-on installations, cabling, and hardware setup)., • Must have physical and mental ability to drive a vehicle for long enough to reach the home office and any location with reasonably short breaks.What we offer:, • Competitive salary and benefits package, including health insurance, dental, vision, and 401(k)., • Opportunity to work with a passionate, innovative team in a growing company., • Professional development opportunities and a supportive work environment.

Job DescriptionDescription: Who We Are Acumera is now Scale Computing! Scale Computing is a global leader in edge computing, hyperconverged infrastructure, and managed networking solutions. We deliver innovative, secure, and scalable technology that powers critical operations worldwide. We’re a growing company looking for motivated professionals to join our team! What We’re Looking For The Tier 1 Deployment Technician provides first-level technical support and performs the foundational tasks that keep Acumera’s overnight deployment operations running smoothly. This role focuses on ticket preparation, pre-cutover verification, documentation accuracy, and communication with field technicians during live deployments. Tier 1 technicians work closely with Tier 2 engineers and the Senior Deployment Specialist to ensure each customer site is ready for a successful network cutover. Requirements:Responsibilities • Prepare nightly deployment tickets and verify readiness for cutover., • Perform pre-deployment network checks and validation of IP addressing, configuration templates, and hardware serials. Monitor live deployments and provide first-line troubleshooting (basic connectivity, credential validation, ping tests). Communicate with field technicians and vendors during the installation window to confirm progress and escalate issues as needed. Update JIRA tickets in real time with accurate status notes, timestamps, and completion confirmations. Validate device status in our proprietary network management tool, after cutover and tag results for Tier 2 review., • Maintain accurate records in Confluence, including site notes, screenshots, and handoff documentation., • Participate in daily shift handoff meetings and report outstanding issues or dependencies., • Support continuous improvement by identifying documentation gaps and suggesting updates to deployment checklists.Qualifications, • Associate degree, diploma, or certification in Information Technology, Computer Networking, or a related field., • 1 – 2 years of experience in IT help desk, NOC operations, or basic network support., • Familiarity with routers, switches, firewalls, and structured cabling fundamentals., • Basic understanding of network topologies, IP subnetting, and VPN concepts., • Experience with JIRA, Confluence, and Slack preferred., • Strong written and verbal English communication skills., • Attention to detail and ability to follow step-by-step deployment procedures. Group medical insurance. Casual dress code. Hybrid Work schedule Paid company holidays. Cab Facilities. Fully stocked snacks at office. Vibrant and Inclusive Workplace Atmosphere. Flexible work environment and an opportunity to grow as we grow. Scale Computing is an equal opportunity employer. The final candidates will be subject to a pre-employment background check.

Job DescriptionBenefits: • Flexible schedule, • Opportunity for advancement Are you a hands-on I.T. or Telecom professional looking for something beyond the desk? AMG Tech Support is seeking skilled, driven technicians to support our growing national client base. This role goes far beyond basic helpdesk tasks one day you might be installing an operating system, the next you're drilling through walls and running structured cabling across entire buildings, or terminating a 66-block. If you're the kind of person who thrives in the field and loves the variety that comes with every job site, this opportunity is for you. Job Responsibilities • Perform a wide range of technical tasks including but not limited to:, • OS installations, hardware diagnostics, and software setup, • Structured cabling (including drilling, running, and dressing cables), • Telecom work (punch-downs, demarc extensions, etc.), • Work independently across various environments: retail, medical, restaurant, and corporate, • Maintain a high standard of professionalism with clients, • Be on call and ready to respond to service requests within your territoryPreferred Skills & Experience, • PC and printer troubleshooting experience (a strong plus), • At least 1 year of I.T. or Telecom experience, and one of the following:, • A+ Certification, • Network+ Certification, • OR 5+ years verifiable field experience in I.T./TelecomRequired Equipment & Qualifications, • Reliable personal vehicle (Public transportation not accepted), • Valid drivers license, • Must have a standard set of tools for basic I.T. and networking tasks (e.g., screwdrivers, cable testers, crimpers)., • Laptop with Ethernet port, • Smartphone with mobile hotspot, • Ability to accept job assignments based on your availability; being on-call 24/7 is a strong advantage., • Punctual, courteous, and presentableCompensation & Perks, • Paid hourly while on site, • 1099 contractor position, • Travel pay included (based on time travel; approx. 80-mile radius from home), • App-based tracking for job time and travel, • Exposure to new and exciting technologies and clients, • Opportunity to expand your skills and industry knowledgeAbout AMG Tech Support AMG is a trusted provider of I.T. and Telecom solutions to professional offices, medical facilities, restaurants, and retail operations nationwide. We specialize in structured cabling, point-of-sale configurations, and network infrastructure. Our mission is to deliver reliable, scalable, and efficient I.T. services that help our clients stay competitive and connected. Ready to take your I.T. career to the next level? Apply today and join a team that values flexibility, skill, and drive.

Job Description Bosch Building Technologies – Estimator - Security About Robert Bosch GmbH Headquartered in Germany, Robert Bosch GmbH is a premier global supplier with four primary business sectors: Automotive Technology, Industrial Technology, Consumer Goods, and Energy and Building Technology. Over 400,000+ associates generate sales of over €90 billion. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is “Invented for life.” Ninety-two percent of the share capital of Robert Bosch GmbH is held by Robert Bosch Stiftung GmbH, a charitable foundation. The special ownership structure guarantees the entrepreneurial freedom of the Bosch Group, making it possible for the company to plan over the long term and to undertake significant investments in safeguarding its future. In North America, Robert Bosch LLC supplies automotive original equipment and aftermarket products, industrial drive and control technology, power tool, security and building technology, thermo-technology, household appliances, solar energy, healthcare, and software innovations. Bosch established its regional presence in North America in 1906 and now employs 41,000 associates in more than one hundred locations. Bosch Building Technologies Integrator Business The regional system integration business called Bosch Building Technologies offers solutions and customized services for building security, energy efficiency, and building automation for commercial buildings and infrastructure projects Bosch started its Integrator Business in North America through the acquisition of Climatec in 2015. Climatec expanded Bosch’s role as a comprehensive supplier of energy, building automation and security solutions. Climatec is recognized in the building industry as an independent single-source integrator of critical building systems including energy services, building automation and security & life safety in the U.S. market. The company provides consulting, planning, implementation and 24/7 remote management. Climatec is active in several market segments and industries including data centers, commercial real estate buildings, and federal, state, and local government. Climatec has operated as an independent entity, maintaining its offices in Arizona, California, Nevada, Texas, New York, and New Jersey. Climatec continues to represent and integrate numerous leading manufactures’ product lines across its wide range of services, including Bosch products. In 2023, Bosch acquired Canadian-based security integrator Paladin Technologies. Merging Paladin Technologies and Climatec will significantly expand Bosch’s Integrator Business in North America. Today the combined entity of Bosch Building Technologies (previously Climatec and Paladin Technologies) represents over $800M in revenues and 2800 associates. Utilizing the strengths of both companies, Bosch offers its customers a complete portfolio of networked and efficient energy, building automation and security solutions. Job Summary: As an Estimator, your main responsibility will be to maximize the award of profitable contracts by leading estimating and bid administration activities. You will work closely with the Sales, Design, and Project Management team to ensure that our customers are provided with the highest quality service. Ideal candidates will represent Bosch in a professional manner that aligns with our values of leadership mindset, people development, team, and client-focused. A typical day could see you responding to an RFP, holding client meetings, working with project teams during installation, or planning for the closeout of a project. Responsibilities • Prepare cost budgets based on drawings, specifications, and other relevant materials, • Work closely with Engineering, Sales, and PMO to develop cost estimates for labor and logistics and detailed BOM, • Identify labor, material, and time requirements by studying proposals, blueprints, specifications, and related documents, • Compute and communicate costs through analysis of labor, material, and time requirements, • Engage subcontractors to augment Paladin’s areas of expertise to provide a complete solution, • Obtain best product prices from manufacturers, distributors, and subcontractors, • Maintaining technical knowledge by attending educational workshops, reviewing technical publications, establishing networks, • A minimum of three years of design experience in the information technology and integrated security systems., • A strong understanding of the physical security and/or IT industries, including an awareness of complimentary products, technologies, trends, and the general application of physical security technology, • An understanding of and experience with fundamental concepts pertaining to IP networks, low voltage electronics, power, and communications., • Ability to create and edit design drawings, spread sheets, program sheets and projects handover documentation., • A strong command of the English language supported by excellent written and verbal communication skills, • The ability to simultaneously handle multiple tasks and projects and be responsive to changing priorities in a fast-paced environment, • Highly developed analytical and problem-solving skills, • Previous and progressive experience as an Estimator in the low voltage industry with demonstrated success completing complicated estimates/designs involving access control, CCTV, intrusion detection, IP networks, intercom, duress, and/or structured cabling., • Experience estimating projects worth between $250K-$500K or larger, • Experience working with some or all the following systems is preferred:, • Access Control - LenelS2, Software House, Avigilon, Kantech, Genetec, AMAG, RBH, • CCTV – Milestone, Avigilon, Genetec,, • Intrusion – Bosch, DSC, DMP, Senstar, Southwest Microwave,, • Network Switching – Cisco, Ruckus, HPE,, • RTLS – Actall, Guard RFID,, • Programmable Logic Controllers (PLC) – Schneider, Omron, • Structured cabling - Belden, CommScope, Corning, Panduit, • Door Hardware - any- considered assets, • Experience in a technical sales role or system design would be considered an asset., • Strong computer skills, with advanced proficiency in Microsoft Office, Mac OS, and project / quoting software, • Post-secondary education in electronics, electrical, or equivalent would be considered an asset In general, the following physical demands are representative of those that must be met by an employee to successfully perform the essential functions of the job. • Must be able to effectively communicate, (i.e., see, hear, speak, and write clearly) in order to communicate with colleagues and/or customers; manual dexterity required for occasional reaching, lifting of light office objects, and operating office equipment In general, the following conditions of the work environment are representative of those that an employee encounters while performing the essential functions of this job. • The office is clean, orderly, properly lighted, and ventilated. Noise levels are considered low to moderate, • Compensation: $79,000 - $93,000 (DOE), • Working Hours: This position generally works Monday- Friday, overtime and on call when necessary, • Travel Requirements: N/A Benefits: Full Time Associates and their eligible family members are offered comprehensive medical, dental, and vision plan options as well as company-provided basic life insurance, AD&D, short-term and long-term disability, and access to the employee assistance program. Voluntary benefit options include supplemental life and AD&D insurance, accident, critical illness, and hospital indemnity insurance plans, identity theft protection, pet insurance, and HSA and FSA account options. Associates also have the option to enroll in the company’s 401(k) plan. In addition, associates receive PTO (paid time off), state-mandated sick leave, and 9 paid holidays. Benefits are effective on their first day of employment 401(k) employer match of $0.50 for every $1.00 contributed by the associate up to 6% of earnings. Equal Employment Opportunity Statement This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. Equal Opportunity Employer, including disability / veterans. All your information will be kept confidential according to EEO guidelines. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Reasonable Accommodations If you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, you can reach out to our HR team for support at 602-944-3330 or email . Please note our HR representatives do not have visibility of application or interview status. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization unavailable.

Job DescriptionJob Description: Lead Data Center Technician Position: Data Center Technician Company: The Archetype Strategy 5 Month Contract Pay: 30-40 (based on experience) Overview: The Archetype Strategy is seeking a detail-oriented and skilled Data Center Technician to join our team. In this role, you will be responsible for the critical infrastructure setup within data centers, including installing data cabinets, supporting pathways such as basket trays, and running pre-connectorized fiber. You will play a key part in ensuring that our data centers operate efficiently, reliably, and securely. Key Responsibilities: • Data Cabinet Installation: Install and align data cabinets and racks according to technical specifications and project requirements., • Pathway Support Setup: Design and install pathway support systems, such as basket trays and cable management solutions, ensuring optimal organization and efficiency., • Fiber Optic Installation: Run, terminate, and secure pre-connectorized fiber cables, ensuring accuracy and reliability in data transmission., • System Integration: Collaborate with engineering teams to ensure seamless integration of infrastructure with existing systems., • Quality Assurance: Conduct testing and inspections to ensure installations meet industry standards and company guidelines., • Documentation: Maintain detailed records of installations, configurations, and modifications within the data center., • Safety Adherence: Comply with all safety protocols and regulations, maintaining a safe and secure working environment.Qualifications:Required Skills and Experience:, • Demonstrated experience in data center installation or a related technical field., • Expertise in installing data cabinets, rack systems, and supporting infrastructure such as basket trays., • Hands-on experience with pre-connectorized fiber cable installation and management., • Familiarity with data center standards such as TIA/EIA-942 and BICSI guidelines., • Strong ability to read and interpret technical diagrams, blueprints, and layouts., • Excellent problem-solving skills and meticulous attention to detail., • Proven ability to lead and mentor a team of technicians, fostering a collaborative and productive environment., • Strong organizational and time-management skills to prioritize tasks and manage project timelines effectively., • Excellent communication (both written and verbal) and interpersonal skills to interact with team members, stakeholders, and clients., • Ability to delegate tasks effectively and provide clear instructions and guidance.Preferred Skills:, • Relevant certifications such as BICSI Technician, RCDD, or Fiber Optic Technician., • Experience working within operational data centers., • Knowledge of structured cabling systems and industry best practices.Physical Requirements:, • Capability to lift and handle equipment weighing up to 50 pounds., • Ability to work in confined spaces or at heights as required. Powered by JazzHR tjhHc49o8e

Job Description We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more. As part of the global ALTEN Group—57,000+ engineers in 30 countries—we deliver across the entire product development cycle, from consulting to full project outsourcing. When you join ALTEN Technology USA, you'll collaborate on some of the world's toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow. REMOTE 75% travel expected About the Role: Responsible for supervision during erection and construction, pre-commissioning and commissioning of a Water Treatment plant located near Odessa, TX. A supporting role during operations and through the warranty process will be evaluated upon completion of commissioning. Responsibilities: • Construction liaison between design engineering and construction during the erection of the Water Treatment Plant., • Provide technical instruction and assistance to customer representatives regarding installation, operation, calibration, repair and maintenance at customer's sites., • Manage activities of outside vendors and suppliers, assuring services and supplies meet project specifications and performance requirements., • Develop Standard Operating Procedures and log sheets to document and monitor equipment during storage, installation and/or initial operations., • Develop and execute installation, assembly and storage plans., • Perform quality inspections of electromechanical equipment/rotating equipment with Clients and client-designated representatives., • Maintain strong safety mindset to assure the executed work reflects the technical requirements within safety standards, • Prepare timely and accurate technical reports for customer records and a reference for future outages, • Figure out alignment issues and plumb adjustment figures. Plane Geometry, chemistry formulas., • Lead and/or assist customers with Electrical and/or Instrumentation requirements (space, labor requirements, tools, disposal of test water, etc..) to support commissioning activities, operational/startup spares and Operating and Maintenance Practices., • Participate in Customer Factory Acceptance Tests and related Control Systems reviews., • Perform on-site programming for Water Treatment Control Systems and assist with electrical installation and troubleshooting., • Work closely with Automation and E&I Leaders regarding project execution and continuous improvement. Education and Experience: • College Diploma with a minimum of 5 years of experience in Water Treatment field or 10 years of experience in Construction and/or Commissioning Qualifications: • Strong focus on customer relationships (both external and internal customers). Understands balance between customer and teams., • Knowledge of and/or demonstrated ability to learn equipment and process startup related to WTS products and systems including but not limited to Reverse Osmosis, Clarifiers, Thickeners, Pressure Filters, etc.., • Demonstrated ability to work independently and remotely with project teams., • Possess basic water treatment chemistry knowledge and communicate that information to others., • Electrical experience and know-how (hands on, reading and interpreting drawings, etc), particularly with electrical panels, junction box, cabling and grounding practices, etc.., • Familiarity with setup, installation, configuration, calibration and/or maintenance of instrumentation used in water treatment processes., • Strong oral and written communication skills, • Valid driver's license. Desired Qualifications: • Experience in Commissioning, Construction or Services., • Bachelor Degree in Engineering or Equivalent from an accredited University or College, • Oil and Gas experience, • Electrical experience and know-how (hands on, reading and interpreting drawings, etc.), particularly with electrical panels and water treatment equipment., • Ability to plan multiple priorities and focus on the most important ones., • Ability to adapt quickly to new problems, clients, and situations., • Training in Lock-Out/Tag-Out procedures preferred. Physical Demands: • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • The noise level in the work environment is usually moderate; possible exposure to loud noise level on site. The site assignments shall be in foreign countries and may involve accommodations at remote work camps. Many water treatment facilities are located outside and work activities will be outdoors. Location: REMOTE (75% travel expected) Salary Range: 0-5 years - $30hr - $38hr ($102,900) / 5-8 years - $40hr - $48hr ($164,640) ALTEN Technology is an Equal Opportunity Employer. Our Policy is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status. Please beware of job seeker scams and see this important notice on our careers page for more information about our recruiting process. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

Job Description At GFiber, we believe that great internet has the power to drive innovation, strengthen communities, enable the impossible, and do all the everyday things that make all of our world go round. And the job of creating better internet is never done - so we're growing! Our team is committed to building a place where people who want to make a difference can grow their careers and find their spot to belong. GFiber is an Alphabet company that brings Google Fiber and Google Fiber Webpass internet services to homes and businesses across the United States. Our teams are expanding as we connect more cities and people to exceptional internet. This role is not eligible for immigration sponsorship. The application window will be open until at least February 27th, 2026. This opportunity will remain online based on business needs which may be before or after the specified date. Role Description As the Field Operations Manager I, you will oversee all field support, splitting time between the central office and field, for local operations, including planning, coaching, scheduling, and coordination of all team activities. You'll oversee a team that includes Construction Technicians, OSP Plant Maintenance Technicians I and II, and Residential Installers. Using your experience of Fiber to the Home (FTTH), Gigabit Passive Optical Network (GPON), 10 Gigabit Passive Optical Network (XGS) network construction, you will ensure the internal team and vendors understand the proper methods for installation, maintenance, and repair of network infrastructure as well as safety standards like Occupational Safety and Health Administration (OSHA). In this management role, you'll also focus on resolving complex interactions between customers and team members, making sure everyone feels heard and process iteration occurs. In this role, you'll: Field Operations Leadership: • Lead and manage a team of technicians, overseeing all aspects of field operations including planning, scheduling, and coordinating construction, installation, repair, and maintenance activities., • Troubleshoot and resolve service issues across the network, from the central office to customer premises., • Navigate complex customer interactions with exceptional client service, professionalism, and thoroughness., • Communicate effectively with internal colleagues and external customers., • Execute operational processes and procedures with attention to detail., • Ability to work non-standard working hours, including nights, weekends, holidays, and varying shifts, and be willing to travel domestically up to 10% of the time. At a minimum we'd like you to have: • 5 years of experience in Fiber to the Home (FTTH)/ Gigabit Passive Optical Network (GPON)/ 10 Gigabit Passive Optical Network (XGS) network construction and/or large scale fiber network deployments., • 5 years of experience managing relationships with contractors and suppliers., • 3 years in a people manager position., • Experience with physical layer components of networking infrastructure, including twisted pair copper cabling (Category 5 or greater), 66 blocks, 110 blocks, patch panels, fiber optic cabling, etc., • Ability to lift/move up to 50lbs of equipment as required., • Valid driver's license and the ability to pass a motor vehicle record check that meets company standards. It's preferred if you have: • 5 years of experience in building and operating fiber networks for business-to-business (B2B) and enterprise environments., • Experience interfacing with local pole owners and utility companies, coordinating with city/local permitting offices, and subject matter expertise in outside plant Fiber to the Home (OSP FTTH) deployments with experience in service drop installations., • Experience troubleshooting Ethernet network issues related to routers, switches and hubs., • Experience with rack and stack work, assembling server stanchions, telemetry closet work (MPOE, DMARC, etc.), and patch panels., • Ability to operate Google Workspace and Salesforce applications. The US base salary for this full-time position is $92,000 - $101,000 + bonus + benefits. As pay varies by location, your recruiter will share more about the specific salary range for your targeted location during the hiring process. GFiber is committed to equal opportunity employment regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, gender identity, age, citizenship, marital status, disability or Veteran status. Disclosure is voluntary, and this information will be kept confidential in compliance with Google's Candidate Privacy Policy. For more information please refer to our Equal Employment Opportunity Policy and the EEOC's "Know your rights: workplace discrimination is illegal" (PDF). It's important to us to create an accessible, inclusive workplace for everyone. If you have a need that requires accommodation, please let us know by completing our accommodations for applicants form. Our candidate accommodations team will then connect with you to confidentially discuss your options.

Job Description Cable Technician Duties: · Pulling and terminating CAT 6, CAT6A, etc. cable in a Datacenter environment · Installing IT servers and patch cords. Cable Technician Requirements: · Recent experience performing low voltage / structured cabling installations in a commercial setting · Familiarity with BICSI, EIA, TIA, or NEC Standards · Rack and stack work, closet work, putting together server racks, patch panels · Fiber experience including Anaerobic Terminations, SC and LC Connectors, and Splicing is a huge plus · Your own basic telecom tools including punch downs, snips, wire strippers, cordless drill etc. PPE required · Impact / cut resistant Gloves · Type Two Hard Hat · Safety Glasses · Safety Vest · Steel Toed Boots Compensation: · Competitive starting pay $18-28/hr or depending on experience · Get paid weekly! · Option to enroll in Medical, Dental, Vision, and contribute to 401K · Referral Bonuses of up to $250 for referrals that result in a placement – simply click “REFER” below to share with a friend! Company DescriptionOutsource is the Nation's leading provider of low voltage, electrical, and plumbing talent. We work EXCLUSIVELY in electrical, plumbing, and low-voltage, and have been placing candidates of all levels with the right companies since 1998 so we know a thing or two about making a good match. Outsource is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, gender, sexual orientation, gender identity or expression, religion, national origin, marital status, age, disability, veteran status, genetic information, or any other protected status.Outsource is the Nation's leading provider of low voltage, electrical, and plumbing talent. We work EXCLUSIVELY in electrical, plumbing, and low-voltage, and have been placing candidates of all levels with the right companies since 1998 so we know a thing or two about making a good match. \r\n\r\nOutsource is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, gender, sexual orientation, gender identity or expression, religion, national origin, marital status, age, disability, veteran status, genetic information, or any other protected status.

Job DescriptionSystems Engineer About Sage Integration Holdings, LLC Sage Integration Holdings, LLC protects the people, facilities, and reputation of enterprise clients by advancing the intelligence and integration of security technology. Innovation at SAGE is foundational—not a department or an afterthought. Our culture is built around five core factors that drive proactive, client‑focused solutions every day. These factors guide our strategic decisions and ensure innovation is as essential to our work as turning on the lights. Job Summary The Systems Engineer is responsible for installing, servicing, and maintaining enterprise‑level security systems, including CCTV, access control, intrusion detection, and related technologies. This role requires strong technical expertise, excellent communication skills, and the ability to work independently in dynamic environments. Important: This role is not internal IT and does not involve help desk support, corporate networks, end-user devices, or software development. This position focuses on designing, configuring, and deploying physical security systems (access control, cameras, field hardware) at customer job sites. Essential Functions * Strong organizational, time‑management, troubleshooting, and problem‑solving skills * Excellent oral and written communication abilities * Ability to work independently with minimal supervision * Valid driver’s license with a clean driving record * Ability to pass a pre‑employment drug screen and background investigation * Flexibility to work extended hours, participate in an on‑call rotation, and travel overnight as needed * Commitment to safe work practices and protection of confidential information Major Duties & Responsibilities * Install, configure, and repair CCTV systems (analog and IP), access control systems, burglar alarms, and related security equipment * Perform system diagnostics, preventive maintenance, and troubleshooting on indoor and outdoor equipment * Document all installation, service, and maintenance activities * Pull wire, terminate cabling, and complete infrastructure work as required * Operate lifts and work safely at various heights * Follow all customer and company safety standards * Perform additional duties as assigned Physical Demands & Safety Requirements * Ability to lift and carry an 80‑lb extension ladder * Ability to climb stairs, ladders, and scaffolding * Ability to work at heights using man lifts, scissor lifts, and fall‑protection equipment * Ability to work in all weather conditions Education & Certifications * High school diploma or equivalent required * Manufacturer certifications preferred, including: Honeywell, Kantech, American Dynamics, Prowatch, Victor, VMS, or similar security platforms Skills & Experience * 5+ years of hands‑on experience in a similar systems installation or service role * Working knowledge of MS Office and general computer proficiency * Ability to effectively use hand and power tools * Experience with CCTV, access control, and security system technologies * Strong understanding of networked security systems and IP‑based devices Benefits * Competitive pay * Paid vacation and holidays * Health benefits * Life insurance * 401(k) plan with employer match * Incentive plan Equal Opportunity Employer Sage Integration Holdings, LLC is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin.

Job DescriptionSaronic Technologies is a leader in revolutionizing defense autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations for the Department of Defense (DoD) through autonomous and intelligent platforms. Job Overview: We are seeking a versatile Forward Deployed Hardware Engineer to join our technical team. You will have a strong mechanical and electrical background and be responsible for bringing our technology from the lab to the fleet. This is not a traditional engineering role. You will be responsible for deploying our systems into the real world, directly supporting maritime missions. You will integrate cutting-edge mechanical and electrical payloads, debug complex system-level problems, and iterate hardware designs in the field to ensure success. This is a highly hands-on and field-oriented role with time split between the lab, fabrication spaces, and the waterfront.Responsibilities • Serve as a multidisciplinary field engineer responsible for mechanical and electrical integration of novel systems and payloads onto our Autonomous Service Vessels (ASVs) and maritime platforms, • Lead rapid prototyping efforts to support field experimentation and platform evolution, • Perform system bring-up, integration, and troubleshooting of power, networking, sensors, and compute subsystems, • Own dockside and sea trials - prepare vessels, install new hardware packages, and perform system validation in operationally relevant environments, • Drive design-for-assembly and design-for-deployment feedback into hardware product development, • Work closely with cross-functional teams, including Mechanical, Electrical, Software, and Autonomy Engineers, to evolve and harden system designs, • Interface with suppliers and fabrication shops to support fast turnarounds of custom components and harnesses, • Contribute to documentation and training to support the scaling of deployment and manufacturingQualifications, • Bachelor's degree in Mechanical Engineering, Electrical Engineering, Mechatronics, or a related field. Master's degree is a plus, • 3+ years of experience working on integrated electromechanical systems, preferably in fielded or mission-critical environments, • Hands-on expertise in Mechanical assembly and fabrication (CNC, sheet metal, 3D printing, etc.), • Hands-on expertise in Electrical integration (power systems, cabling, connectors, PCB bring-up), • Hands-on expertise in rapid prototyping and system-level debugging, • Comfort working with tools such as CAD (SolidWorks, NX, or similar), basic electrical test equipment (multimeters, oscilloscopes), and field integration setups, • Experience working with a Linux-based operating system, • Understanding of networking protocols and distributed systems, including TCP/IP, UDP, and message-passing frameworks, • Willingness to work in dynamic, hands-on environments, including on and near the water, • Strong sense of ownership and bias for action, • You thrive in real-world environments, responsible for solving open-ended problems, • Experience working with autonomous systems, drones, or other robotic platforms is preferred, • Familiarity with maritime environments or naval platforms is preferred, • Ability to write basic software tools (e.g., Python, shell scripts) for hardware bring-up or test automation is preferred, • Exposure to ruggedized or IP-rated hardware design is preferred, • Experience in systems integration or test engineering is preferred Benefits, • Medical Insurance: Comprehensive health insurance plans covering a range of services, • Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care, • Saronic pays 100% of the premium for employees and 80% for dependents, • Time Off: Generous PTO and Holidays, • Parental Leave: Paid maternity and paternity leave to support new parents, • Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses, • Retirement Plan: 401(k) plan, • Stock Options: Equity options to give employees a stake in the company’s success, • Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage, • Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office Physical Demands, • Prolonged periods of sitting at a desk and working on a computer, • Occasional standing and walking within the office, • Manual dexterity to operate a computer keyboard, mouse, and other office equipment, • Visual acuity to read screens, documents, and reports, • Occasional reaching, bending, or stooping to access file drawers, cabinets, or office supplies, • Lifting and carrying items up to 20 pounds occasionally (e.g., office supplies, packages)This role requires access to export-controlled information or items that require “U.S. Person” status. As defined by U.S. law, individuals who are any one of the following are considered to be a “U.S. Person”: (1) U.S. citizens, (2) legal permanent residents (a.k.a. green card holders), and (3) certain protected classes of asylees and refugees, as defined in 8 U.S.C. 1324b(a)(3).

Job DescriptionQuantiq specializes in high frequency derivatives trading in the largest markets worldwide. Our approach is rigorous and pragmatic, driven by technological expertise and analytics informed by real-world experience. We value employees who love to learn and have the tenacity, curiosity and willpower to contribute to our continuing success. We are a small but passionate team, dedicated to enhancing and refining our tried and true methods as we commit to our ongoing growth and performance. Quantiq runs considerable "in-house" infrastructure (IPA realm) consisting of 50-100 computers ranging from high performance servers and varied datacenter hardware (switches, FPGAs, fiber optic cabling), to desktop computers with dedicated GPUs and an array of monitors and peripherals across offices. We control the majority of the stack and create, maintain, update, and monitor a variety of systems to keep the companys trading running smoothly. Our hardware infrastructure operates entirely on Fedora Linux and incorporates significant first- and third-party software requiring occasional maintenance. This complete infrastructure has high uptime requirements to support our critical trading operations. Role Description: As a DevOps Engineer, youll be at the forefront of transforming and enhancing our infrastructure. You will collaborate with the Operations and Technical teams to improve our deployment pipelines, automate processes, and elevate our infrastructure. This position requires strong Linux expertise, automation skills, and a deep understanding of network configurations and performance tuning for low-latency applications. If the following resonates with you, we would love to welcome you to our team. Job Responsibilities: • Analyze current systems, identify gaps, and spearhead improvements to optimize performance and scalability, • Fine-tune Linux systems (kernel and user-space) to minimize latency and improve reliability, • Design and manage real-time, low-latency networking configurations, adjusting kernel parameters, IRQ affinities, and CPU pinning as necessary, • Implement automation solutions using scripting languages (e.g., Bash, Python), • Work with specialized hardware (FPGAs, custom network cards, high-frequency switches) to optimize latency in trading systems, • Develop and document backup procedures and failover strategies, conducting drills to improve failure tolerance, • 5+ years of experience in a DevOps, Systems Engineering, or related role, • Proven ability to build, optimize, and scale Linux-based infrastructure, • Excellent organizational skills and attention to detail in fast-paced environment, • Strong written and verbal communication skills, • Ability to respond to occasional off-hour emergencies, • Strong scripting and automation skills (Python, C++, Bash), • Exceptional capability debugging and solving complex issues related to both hardware, low level software, and networking, • Knowledge of network architecture, • Basic networking tool experience (ping, ifconfig, telnet, wireshark, nmcli), • Experience with the following technologies:, • Computer hardware (such as Supermicro and Dell Servers), • Networking hardware, • Fedora Linux, • FreeIPA, OpenLDAP, OpenVPN, • DNS, • ZFS, • Gitea, Zulip, • GRUB, PXE*Note: You are not expected to know every technology listed but experience in all is a plus Please Apply If: • You are a problem solver who wants to understand the intricacies of a complex system, • Youre a scripting pro who automates everything, • You know the thrill of building, breaking, and re-building CI/CD pipelines Attach the file in the "Cover Letter" section.

Job Description Founded in 1985, with offices in Houston, College Station, Dallas, San Antonio, and Austin, Electra Link remains at the forefront of technology. Our professional capabilities range from one network cable drop to turnkey multi-building installations and off-shore rig projects, including full audiovisual systems. Our Registered Communication Distribution Designers (RCDD) have designed and installed thousands of structured cabling systems, and our AV systems integration teams have a depth of experience unmatched in the industry. The Audio-Visual Sales Engineer is an integral part of the AV team. This role will collaborate with the Design team to secure pre-sales and post-sales requirements, requiring a strong understanding of Audio-Visual principles, practices, and design. The Sales Engineer must have substantial communication skills to interface with clients, architects, contractors, project managers, and company staff. This role will work directly with Customers, Sales & AV Designers. Responsibilities: • Research, design, and engineering from simple to complex AV systems, • Attend sales meetings and job walks, • Create Project Closeout Documents, • Responsible for actively driving and managing the technology evaluation stage of the sales process, working in conjunction with the Sales team as the key technical advisor, • Acting as lead Sales Engineer during the presales process through solution implementation, • Providing support to the Design Team in requirement identification, solution design, and customer presentation for Audio-Visual Project Opportunities, • Providing discovery (on-site/remote) support to capture environmental details, • Architecting cost effect, reliable, supportable, Audio-Visual designs based on the client's needs analysis, • Meet with the client to develop a clear and concise project requirements document for each project, • Developing detailed Scope of Works for Audio-Visual Projects, • Creating and modifying documentation, Scopes of Works (SOW), line drawings (DRW), Bill of Materials (BOM), and Site Survey (SSRV) as required, • Interacting in person, by phone, &/or by e-mail directly with client management and end-users, • Responsible for articulating technology and product positioning to both business and technical users, • Identifying all technical issues of assigned accounts to assure complete customer satisfaction through all stages of the sales process, • Demonstrating continued technical education through vendor and/or industry certification achievement, • Minimum of 5 years experience within the audio visual industry, • Minimum of 2 years experience in engineering & design, • Extensive knowledge of signal flow for audio, video, control, and networking., • AVIXA, CTS, and CTS-D certifications preferred, • Certifications in Crestron, Extron, Shure, Planar, Biamp, AMX, QSC, Polycom, Cisco, and others, • Medical/Dental/Vision/Life, • 401K with company matching Jtg9fxbh2i

Job Description Bosch Building Technologies – Estimator II - Structured Cabling About Robert Bosch GmbH Headquartered in Germany, Robert Bosch GmbH is a premier global supplier with four primary business sectors: Automotive Technology, Industrial Technology, Consumer Goods, and Energy and Building Technology. Over 400,000+ associates generate sales of over €90 billion. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is “Invented for life.” Ninety-two percent of the share capital of Robert Bosch GmbH is held by Robert Bosch Stiftung GmbH, a charitable foundation. The special ownership structure guarantees the entrepreneurial freedom of the Bosch Group, making it possible for the company to plan over the long term and to undertake significant investments in safeguarding its future. In North America, Robert Bosch LLC supplies automotive original equipment and aftermarket products, industrial drive and control technology, power tool, security and building technology, thermo-technology, household appliances, solar energy, healthcare, and software innovations. Bosch established its regional presence in North America in 1906 and now employs 41,000 associates in more than one hundred locations. Bosch Building Technologies Integrator Business The regional system integration business called Bosch Building Technologies offers solutions and customized services for building security, energy efficiency, and building automation for commercial buildings and infrastructure projects Bosch started its Integrator Business in North America through the acquisition of Climatec in 2015. Climatec expanded Bosch’s role as a comprehensive supplier of energy, building automation and security solutions. Climatec is recognized in the building industry as an independent single-source integrator of critical building systems including energy services, building automation and security & life safety in the U.S. market. The company provides consulting, planning, implementation and 24/7 remote management. Climatec is active in several market segments and industries including data centers, commercial real estate buildings, and federal, state, and local government. Climatec has operated as an independent entity, maintaining its offices in Arizona, California, Nevada, Texas, New York, and New Jersey. Climatec continues to represent and integrate numerous leading manufactures’ product lines across its wide range of services, including Bosch products. In 2023, Bosch acquired Canadian-based security integrator Paladin Technologies. Merging Paladin Technologies and Climatec will significantly expand Bosch’s Integrator Business in North America. Today the combined entity of Bosch Building Technologies (previously Climatec and Paladin Technologies) represents over $800M in revenues and 2800 associates. Utilizing the strengths of both companies, Bosch offers its customers a complete portfolio of networked and efficient energy, building automation and security solutions. Job Summary: As an Estimator with Bosch, your main responsibility will be to maximize the award of profitable contracts by leading estimating and bid administration activities. You will work closely with the Sales, Design, and Project Management team to ensure that our customers are provided with the highest quality service. Ideal candidates will represent Bosch in a professional manner that aligns with our values of leadership mindset, people development, team, and client focused. A typical day could see you responding to an RFP, meeting with sales team members, working with service and project teams during installation, or working with clients to identify scope requirements. Responsibilities: • Prepare cost budgets based on drawings, specifications, and other relevant materials, • Work closely with Engineering, Sales, and PMO to develop cost estimates for labor and logistics and detailed BOM, • Identify labor, material, and time requirements by studying proposals, blueprints, specifications, and related documents, • Compute and communicate costs through analysis of labor, material, and time requirements, • Engage subcontractors to augment Paladin’s areas of expertise to provide a complete solution, • Obtain best product prices from manufacturers, distributors, and subcontractors, • Maintaining technical knowledge by attending educational workshops, reviewing technical publications, establishing networks, • Coordinating bid proposal development with all relevant stakeholders, • A minimum of 2 years of design and estimation experience in information technology and structured cabling systems, • A minimum of 5 years of technical field experience or project management of low voltage system installation, • Strong computer skills, with advanced proficiency in Microsoft Office, Bluebeam, Mac OS, and project / quoting software, • A strong understanding of network infrastructure, data center design, and IT industries, including an awareness of complimentary products, technologies, and trends, • An understanding of and experience with fundamental concepts pertaining to IP networks, low voltage electronics, power, and communications., • Ability to create and edit design drawings, spread sheets, program sheets and projects handover documentation., • A strong command of the English language supported by excellent written and verbal communication skills, • The ability to simultaneously handle multiple tasks and projects and be responsive to changing priorities in a fast-paced environment, • Highly developed analytical and problem-solving skills, • Previous and progressive experience as an estimator in the low voltage/structured cabling industry with demonstrated success completing complicated and complex estimates and designs, • Experience working with some or all the following systems is preferred:, • Structured cabling - Belden, CommScope, Corning, Panduit, • Telecom equipment racks, cabinets, and cable raceway, • Structured cabling support system and pathway equipment, • Access Control - LenelS2, Software House, Avigilon, Kantech, Genetec, AMAG, RBH, • CCTV – Milestone, Avigilon, Genetec,, • Intrusion – Bosch, DSC, DMP, Senstar, Southwest Microwave,, • Network Switching – Cisco, Ruckus, HPE, • RTLS – Actall, Guard RFID, • Programmable Logic Controllers (PLC) – Schneider, Omron, • Door Hardware - any- considered assets, • Audio Visual – Crestron, Extron, Neat, etc., • Experience in a technical sales role or system design would be considered an asset, • Post-secondary education in electronics, electrical, or equivalent would be considered an asset In general, the following physical demands are representative of those that must be met by an employee to successfully perform the essential functions of the job. • Must be able to effectively communicate, (i.e., see, hear, speak, and write clearly) in order to communicate with colleagues and/or customers; manual dexterity required for occasional reaching, lifting of light office objects, and operating office equipment In general, the following conditions of the work environment are representative of those that an employee encounters while performing the essential functions of this job. • The office is clean, orderly, properly lighted, and ventilated. Noise levels are considered low to moderate, • Working Hours: This position generally works Monday- Friday, overtime and on call when necessary, • Travel Requirements: N/A, • Benefits:, • Medical, • Dental, • Vision, • Flexible Spending Accounts, • 401K w/ company match, • Life/AD&D/LTD, • Paid Vacation/Sick/Holidays, • Employee Assistance Program This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. Equal Opportunity Employer, including disability / veterans. All your information will be kept confidential according to EEO guidelines. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Reasonable Accommodations If you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, you can reach out to our HR team for support at 602-944-3330 or email . Please note our HR representatives do not have visibility of application or interview status. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization unavailable.

Job Description Overview: The Archetype Strategy is seeking a detail-oriented and skilled Data Center Technician to join our team. In this role, you will be responsible for the critical infrastructure setup within data centers, including installing data cabinets, supporting pathways such as basket trays, and running pre-connectorized fiber. You will play a key part in ensuring that our data centers operate efficiently, reliably, and securely. Key Responsibilities: • Data Cabinet Installation: Install and align data cabinets and racks according to technical specifications and project requirements., • Pathway Support Setup: Design and install pathway support systems, such as basket trays and cable management solutions, ensuring optimal organization and efficiency., • Fiber Optic Installation: Run, terminate, and secure pre-connectorized fiber cables, ensuring accuracy and reliability in data transmission., • System Integration: Collaborate with engineering teams to ensure seamless integration of infrastructure with existing systems., • Quality Assurance: Conduct testing and inspections to ensure installations meet industry standards and company guidelines., • Documentation: Maintain detailed records of installations, configurations, and modifications within the data center. Required Skills and Experience: • Demonstrated experience in data center installation or a related technical field., • Expertise in installing data cabinets, rack systems, and supporting infrastructure such as basket trays., • Hands-on experience with pre-connectorized fiber cable installation and management., • Familiarity with data center standards such as TIA/EIA-942 and BICSI guidelines., • Strong ability to read and interpret technical diagrams, blueprints, and layouts., • Relevant certifications such as BICSI Technician, RCDD, or Fiber Optic Technician., • Experience working within operational data centers., • Capability to lift and handle equipment weighing up to 50 pounds., • Ability to work in confined spaces or at heights as required. At The Archetype Strategy, we focus on delivering tailored solutions that optimize and transform operational excellence for our clients. Our team thrives on collaboration, innovation, and a commitment to excellence. Joining us means being part of a forward-thinking organization that values expertise and growth. Powered by JazzHR 9umcn4Nukf

Job DescriptionSaronic Technologies is a leader in revolutionizing defense autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations for the Department of Defense (DoD) through autonomous and intelligent platforms. Position OverviewSaronic Technologies is seeking a Senior Electrical Engineer specializing in Radio Frequency (RF) systems to join our Electrical Engineering – Advanced Development group. This role will focus on the research, evaluation, and integration of RF communications and sensing technologies - including radio transceivers, radar systems, antennas, and related electronics - supporting autonomous vessel networks and situational awareness. The ideal candidate has extensive experience in RF system design, testing, and benchmarking, with a strong foundation in wireless communications, spectrum management, and signal propagation in marine environments. This is a technically demanding, research-focused position with opportunities to influence system architecture and future platform capabilities.Key Responsibilities • Lead R&D efforts in RF communications, radar, and electronic sensing technologies for autonomous surface vessels., • Evaluate and benchmark RF hardware and subsystems, including radios, antennas, and signal processing modules across multiple frequency bands (VHF/UHF, L/S/C/X bands)., • Conduct trade studies and comparative analyses of commercial and military-grade RF solutions to inform system selection and integration strategies., • Design, prototype, and test RF systems and supporting electrical architectures, including cabling, shielding, and power interfaces., • Model and analyze RF propagation and link performance in maritime and littoral environments., • Collaborate cross-functionally with autonomy, software, and mechanical teams to ensure seamless integration of communication and sensing systems., • Develop test procedures, perform validation trials, and analyze system performance under operational and environmental conditions., • Author detailed R&D documentation, including technical reports, design specifications, and performance evaluations., • Mentor junior engineers and contribute to Saronic’s RF technology roadmap and internal knowledge base., • Support field testing and vessel trials, including setup and troubleshooting of communication and radar systems.Required Qualifications, • B.S. or M.S. in Electrical Engineering, RF Engineering, or related discipline., • 7+ years of professional experience in RF system design, testing, and integration -preferably in maritime, automotive, aerospace, or defense applications., • Deep understanding of RF theory, antenna design, and signal propagation, including real-world marine effects (multipath, reflection, attenuation)., • Hands-on experience with RF instrumentation (spectrum analyzers, network analyzers, signal generators, power meters, etc.)., • Proven ability to conduct trade studies and technology benchmarking for RF components and systems., • Familiarity with communications protocols such as Ethernet, CAN, and serial interfaces, and with wireless standards (LTE, SATCOM, mesh networking)., • Strong documentation and communication skills; able to translate test results into actionable design insights., • Ability to work effectively in both lab and field test environments (dockside, at-sea, and range conditions).Physical Requirements, • Prolonged periods of sitting at a desk and working on a computer., • Occasional standing and walking within the office., • Manual dexterity to operate a computer keyboard, mouse, and other office equipment., • Visual acuity to read screens, documents, and reports., • Occasional reaching, bending, or stooping to access file drawers, cabinets, or office supplies., • Lifting and carrying items up to 20 pounds occasionally (e.g., office supplies, packages). Benefits, • Medical Insurance: Comprehensive health insurance plans covering a range of services, • Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care, • Saronic pays 100% of the premium for employees and 80% for dependents, • Time Off: Generous PTO and Holidays, • Parental Leave: Paid maternity and paternity leave to support new parents, • Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses, • Retirement Plan: 401(k) plan, • Stock Options: Equity options to give employees a stake in the company’s success, • Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage

Job Description GEOMETRICS is an airport planning, design, construction management & inspection, and program/project management firm, with specialized focus on complex airfield and facility improvement projects and programs at large, medium and small hub, commercial and general aviation airports across the United States. Since its inception in 2015, Geometrics has successfully completed over 55 airfield projects at 30 airports in the states of Arizona, California, Colorado, Florida, Hawaii, Idaho, Illinois, Michigan, New Mexico, Nevada, Ohio, Oklahoma, Oregon, Pennsylvania, Texas, and Washington. Our core competencies are: • Airfield Design, • Geotechnical & Pavement Engineering, • Owner's Representatives PM, CM, & QA, • Terminal, Airside, & Landside Facilities planning and design, • Hydrology & Hydraulics Summary Geometrics Engineering is seeking experienced Electrical QA Inspectors (Low Voltage or Medium Voltage) to support terminal, airfield, and campus-wide construction projects at Austin-Bergstrom International Airport (AUS). This position will support the Austin Expansion and Development Program and is critical to ensuring construction activities comply with contract documents, approved plans, applicable codes, FAA and airport standards, and quality assurance requirements. QA Inspectors will provide on-site field verification, documentation, coordination with contractors, and support to Construction Managers and airport stakeholders throughout the construction lifecycle. Electrical Inspector – Low Voltage The Electrical QA Inspector – Low Voltage will support the inspection of low-voltage building and terminal systems within the airport environment. This role ensures that low-voltage systems are installed, tested, and commissioned in accordance with contract documents and airport standards. Focus Areas and Responsibilities • Inspect low-voltage systems including communications, security, fire alarm, access control, and data cabling., • Verify compliance with contract documents, NEC, NFPA, and airport authority standards., • Witness testing, continuity checks, grounding verification, labeling, and system integration., • Prepare detailed inspection reports documenting deficiencies and corrective actions., • Support commissioning, closeout, and final acceptance documentation., • Minimum 10 years of construction inspection or electrical experience, preferably including aviation projects., • Experience inspecting low-voltage systems in vertical construction environments., • Strong working knowledge of NEC, NFPA, and low-voltage system standards., • Ability to interpret electrical drawings, specifications, and testing documentation. The Electrical QA Inspector – Medium Voltage will support the inspection of airfield and vertical construction medium-voltage systems. This role focuses on underground and above-ground electrical infrastructure supporting airport operations. Focus Areas and Responsibilities • Inspect medium-voltage systems ranging from 600V up to 35kV., • Inspect duct banks, feeders, grounding systems, transformers, switchgear, and protective devices., • Verify compliance with contract documents, NEC, IEEE standards, and airport authority requirements., • Witness testing, energization, and commissioning activities., • Document inspection findings, deficiencies, and corrective actions., • Minimum 10 years of electrical construction or inspection experience, preferably in aviation environments., • Demonstrated experience with medium-voltage underground and vertical electrical systems., • Strong understanding of NEC, IEEE, and airport electrical standards., • Ability to interpret drawings, specifications, and testing documentation. We believe every team member is a catalyst for our success. Don't meet every single requirement? Apply anyway. Studies show that great candidates often pass on opportunities because they don't check every box. At Geometrics, we value authenticity over "perfect" checklists. If you're excited about this role, we want to see your application—you might be exactly who we're looking for. Benefits • Geometrics' health and dental coverage. Geometrics covers our employees 100%, and if spouse or dependents are covered Geometrics provides supplemental support to cover a percentage of the annual premium, • STD/LTD/AD&D/Life are provided to all employees at no cost, • Generous PTO package, 10 company holidays, and 2 floating holidays to be taken at employees' discretion, • Yearly 401(k) contributions (3% of annual salary, not dependent on employee contributions), • Other benefits include:, • BYOD cellphone reimbursement, • Toll reimbursements if applicable, • Visa/PERM sponsorship if applicable Pay Range$52—$66 USD

Job DescriptionQuantiq specializes in high frequency derivatives trading in the largest markets worldwide. Our approach is rigorous and pragmatic, driven by technological expertise and analytics informed by real-world experience. We value employees who love to learn and have the tenacity, curiosity and willpower to contribute to our continuing success. We are a small but passionate team, dedicated to enhancing and refining our tried and true methods as we commit to our ongoing growth and performance. Quantiq runs considerable "in-house" infrastructure (IPA realm) consisting of 50-100 computers ranging from high performance servers and varied datacenter hardware (switches, FPGAs, fiber optic cabling), to desktop computers with dedicated GPUs and an array of monitors and peripherals across offices. Quantiq controls the majority of the stack and creates, maintains, updates, and monitors a variety of systems to keep the companys trading operational. Within our hardware infrastructure we run entirely on Fedora Linux and have significant first and third party software that requires occasional maintenance. This complete infrastructure has high uptime requirements to support our trading operations. Role Description: As a System Administrator, you will be responsible for keeping all internal infrastructure, both hardware and software, running smoothly and supporting the operations and software teams on a day-to-day basis. You will be responsible for full system life cycles: provisioning, install and setup, asset and inventory management, maintenance, monitoring, and decommission of a variety of systems. You will also deal with vendors to acquire new hardware and deploy it. You may occasionally find yourself setting up a desktop or monitor in addition to racking servers. If the following resonates with you, we would love to welcome you to our team. Job Responsibilities: • Troubleshoot and monitor proprietary frameworks/code and third-party systems, • Manage access credentials to a variety of applications and trading systems, • Exhibit cautious and responsible use of sysadmin privileges, • Make infrequent trips to our Austin and Chicago datacenters to maintain hardware, • Create, document, and enforce backup procedures and failovers in all systems, • Run drills/trials and improve failure tolerances across infrastructure, • Assist with onboarding new hires to in-house systems and infrastructure, • 5+ years of experience in a Linux-based admin role, or equivalent, • Attention to detail in a fast-paced environment, • Ability to respond to occasional off-hour emergencies, • Excellent organizational skills and strong written and verbal communication skills, • Exceptional capability debugging and solving complex issues related to both hardware, low level software, and networking, • Ability to perform Bash and Python scripting, • Basic networking tool experience (ping, ifconfig, telnet, wireshark, nmcli), • Knowledge of network architecture is a plus, • Experience with the following technologies:, • Computer hardware (such as Supermicro and Dell Servers), • Networking hardware, • Fedora Linux, • FreeIPA, OpenLDAP, OpenVPN, • DNS, • ZFS, • Gitea, Zulip, • GRUB, PXE*Note: You are not expected to know every technology listed but experience in all is a plus Please Apply If: • You run a home lab for fun and enjoy the sound of server fans, • You are a problem solver who wants to understand the intricacies of a complex system, • You are a distro hopper and can discuss the nuances of your preferred distribution, • You are the type of person to remember the IP address of a certain machine on your network, • You love to see nicely organized, color-coded, and labeled cables If you do not know C++, use another language and explain your decisions. Attach the file in the "Cover Letter" section.

Job Description Centric Fiber is a start-up telecommunications Company that is looking to disrupt the market and provide the fastest most reliable service for Cable, Internet, and TV service available. Centric Fiber partners with home builders to install superior fiber infrastructure directly in the ground during beginning phases of development. This means all homes in a community are already hardwired for high-speed fiber internet, without added costs or complications. The Fiber Splicer is responsible for the terminating, splicing, bonding/grounding, installing CPE into customer house, documenting, and testing of all fiber optic cables within the systems fiber optic networks and their related equipment with the end goal of providing maximum operating efficiency. RESPONSIBILITIES/ESSENTIAL FUNCTIONS: • This position will consist of FTTH daytime, but possibility of some night work., • Fusion splice, terminate and install assortment of fiber optic connectors and enclosures including both loose tube fiber and ribbon fiber up to an 288ct fiber cable., • Construct a splice case, including but not limited to bounding, slack storage and sealing., • Must know the fiber optic color code system (Must be able to discern colors)., • Prepare and maintain splicing records, schematics, and diagrams., • Proficient in using fiber tools and fiber optic test equipment including traffic meters, fusion splicer, power meter, VFL and OTDR., • Troubleshoot damaged fiber, effectively and efficiently., • Install and maintain CPE local area networks (LAN) and WiFi networks, • Install and maintain network interface devices (NID) and Optical Network Terminals (ONT), • Perform skilled troubleshooting from the MDF to the demarcation point including CPE, • Respond to trouble tickets within acceptable company timeframe standards, • Perform routine preventive maintenance and major repairs to distribution systems, • Locate buried copper and fiber optic cabling, • Record and report all record changes immediately, • Ensure that both he/she and all employees comply with proper safety standards/ procedures and work practices according to OSHA standards, Future Infrastructure and/or the customer, whichever standard is higher., • Able to participate in on-call rotation 24/7/365 and work overtime with/without prior notice. Equivalent Education/Experience: • High School Diploma or General Education Degree (GED), • At least 2 years of experience with Fiber Terminations, Fusion Splicing and Testing in an ISP and OSP environment., • Ideal candidate should also have experience as a fiber optic technician, fiber optic splicer, construction with fiber optic background, or fiber optic telecommunications., • Clean & Valid Driver's License, • Ability to travel up to 75% of the time throughout Austin, Dallas, Houston, and San Antonio., • Own hand tools drills, bits, cutters, etc. GrUilNM2jP

Job Description Job Title: Data Center Technician Location: Austin TX -Onsite Mode : Contract (6+ Months) (Could be extended) Mode of Interview:- Phone/Video GC and USC Qualifications: High school pass out – Minimum Technical Experience: Should know basic computer Hardware asset knowledge Experience Required: 6-8 Skills: MVS System Administration Description:- Rack, Build, cable, configure, and provision Servers • Rack, Cable, and Deploy Cisco layer 2 networking equipment, • Troubleshoot, test, quality assurance of Server hardware, • Professionally resolve hardware issues via trouble ticket, • Comfortable lifting weights [ ~50 lbs ], • Can stand for long hours on Ladders, • Ready to travel on need basis, • Basic Networking Knowledge, • Awareness on Safety requirements working at Data Center Desired experience: · Operating System Installation – Windows Server, Linux, Unix · Cabling knowledge beyond dressing or running cabling, such as confidently comprehending port mapping and ability to know the differences and purposes behind each cable type · Understanding of basic hardware troubleshooting and applying logical methods of resolution · Rack, cable, and deploy Cisco Layer 2 networking equipment a plus · Experience with RAID levels is a plus · Web Server and Database installation experience a plus · Must be able to work in this country without sponsorship · Must be willing to learn quickly, multitask, and work in a fast-paced environment

Job Description Job description Overview We are seeking a dedicated and skilled Data Technician to join our team. The ideal candidate will be responsible for supporting the installation, maintenance, and troubleshooting of data systems within our organization. This role requires a strong understanding of network installation and customer service, as well as experience with various technologies in a data center environment. If you have a passion for technology and a commitment to delivering high-quality service, we encourage you to apply. Responsibilities • Install and configure network equipment including switches, routers, and cabling (Cat5 and low voltage)., • Perform routine maintenance and troubleshooting on data center equipment., • Assist with the setup and management of CCTV systems., • Provide excellent customer service while interacting with clients during installations or repairs., • Telecommunicate with team members to coordinate project tasks and updates., • Ensure compliance with safety standards while using power tools during installations., • Document all work performed, including network diagrams and system configurations., • Previous experience in a data center environment or similar role is preferred., • Familiarity with network installation practices and protocols., • Knowledge of Avaya systems is a plus., • Strong customer service skills with the ability to communicate effectively with clients., • Experience working with LAN technologies and low voltage cabling is advantageous. Company DescriptionEco-Staff, LLC has made a commitment to our clients and employees to remain confidential as well as attentive to all needs. We believe that our customer's needs are of the utmost importance and our entire team is committed to meeting those needs. As a result, a high percentage of our business is from repeat customers and referrals. We welcome the opportunity to earn your trust and vow to do everything we can to meet your expectations.Eco-Staff, LLC has made a commitment to our clients and employees to remain confidential as well as attentive to all needs. We believe that our customer's needs are of the utmost importance and our entire team is committed to meeting those needs. As a result, a high percentage of our business is from repeat customers and referrals. We welcome the opportunity to earn your trust and vow to do everything we can to meet your expectations.

Job DescriptionSaronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. Job Overview:We are seeking a Mechanical Integration Engineer to join our multidisciplinary engineering team. This role is focused on the integration of complex subsystems within larger mechanical assemblies. You will work at the intersection of mechanical, electrical, optical, and sensing systems— ensuring cohesive, manufacturable, and reliable integration into the overall platform. Your work will involve everything from packaging sensitive electronics and routing cabling to designing payload interfaces, access panels, and mounting hardware. This is a critical role that connects disciplines, closes gaps between component and system-level thinking, and ensures functional harmony across subsystems. Responsibilities • Design, develop, and integrate mechanical solutions for electronics packaging, optical systems sensor mounts, payloads, and cabling infrastructure, • Own the mechanical interface and installation approach for subsystems and components into the larger vehicle or product assembly, • Drive layout of bulkheads, hatches, brackets, and access features, ensuring manufacturability, serviceability, and reliability, • Manage cable routing and support mechanical considerations for harness design in close coordination with electrical engineering, • Support system-level design reviews, integration planning, and cross-functional design efforts, • Create detailed design documentation including GD&T, stack-ups, assembly drawings, and integration procedures, • Provide tolerance studies, participate in environmental and vibration testing, and resolve integration-related design issues, • Contribute to prototype build support and hands-on problem solving during integration and test phases Qualifications, • Bachelor’s degree or greater in Mechanical Engineering, Aerospace Engineering, or related field, • 2+ years of experience integrating complex mechanical and electrical systems, • Demonstrated expertise in system-level integration and packaging of electronics, sensors, or similar subsystems, • Proficient in 3D CAD (e.g., SolidWorks, NX, or similar) and mechanical documentation practices, • Familiarity with EMI/thermal considerations and their mechanical implications, • Strong collaboration and communication skills across disciplines (electrical, software, manufacturing), • Experience with fast-paced prototyping environments or low-rate production is a plus, • Working or expert knowledge of GD&T a plus Benefits, • Medical Insurance: Comprehensive health insurance plans covering a range of services, • Saronic pays 100% of the premium for employees and 80% for dependents, • Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care, • Saronic pays 99% of the premium for employees and 80% for dependents, • Time Off: Generous PTO and Holidays, • Parental Leave: Paid maternity and paternity leave to support new parents, • Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses, • Retirement Plan: 401(k) plan, • Stock Options: Equity options to give employees a stake in the company’s success, • Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage

Job Description Overview We are seeking a skilled Cable Installer to join our team. The ideal candidate will have a background in low-voltage cabling. It is a plus if you have experience with fiber splicing, telecommunication systems, and mechanical knowledge. Responsibilities • Pull and terminate CAT5e/CAT6 cable for commercial clients, • Troubleshoot and repair cable and internet connections, • Provide excellent customer service during installations and service calls Requirements • Previous experience as a cable installer, • Knowledge of telecommunications systems and equipment, • Ability to work independently and as part of a team, • Excellent communication skills, • Reliable transportation (must have a truck or vehicle that can carry multiple cable boxes and a ladder to the job site) Job Type: Part-time Pay: From $24.00 per hour Expected hours: 15 – 35 per week Compensation Package: • 4 hour shift, • 8 hour shift

Job Description Bosch Building Technologies – BIM Manager About Robert Bosch GmbH Headquartered in Germany, Robert Bosch GmbH is a premier global supplier with four primary business sectors: Automotive Technology, Industrial Technology, Consumer Goods, and Energy and Building Technology. Over 400,000+ associates generate sales of over €90 billion. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is “Invented for life.” Ninety-two percent of the share capital of Robert Bosch GmbH is held by Robert Bosch Stiftung GmbH, a charitable foundation. The special ownership structure guarantees the entrepreneurial freedom of the Bosch Group, making it possible for the company to plan over the long term and to undertake significant investments in safeguarding its future. In North America, Robert Bosch LLC supplies automotive original equipment and aftermarket products, industrial drive and control technology, power tool, security and building technology, thermo-technology, household appliances, solar energy, healthcare, and software innovations. Bosch established its regional presence in North America in 1906 and now employs 41,000 associates in more than one hundred locations. Bosch Building Technologies Integrator Business The regional system integration business called Bosch Building Technologies offers solutions and customized services for building security, energy efficiency, and building automation for commercial buildings and infrastructure projects Bosch started its Integrator Business in North America through the acquisition of Climatec in 2015. Climatec expanded Bosch’s role as a comprehensive supplier of energy, building automation and security solutions. Climatec is recognized in the building industry as an independent single-source integrator of critical building systems including energy services, building automation and security & life safety in the U.S. market. The company provides consulting, planning, implementation and 24/7 remote management. Climatec is active in several market segments and industries including data centers, commercial real estate buildings, and federal, state, and local government. Climatec has operated as an independent entity, maintaining its offices in Arizona, California, Nevada, Texas, New York, and New Jersey. Climatec continues to represent and integrate numerous leading manufactures’ product lines across its wide range of services, including Bosch products. In 2023, Bosch acquired Canadian-based security integrator Paladin Technologies. Merging Paladin Technologies and Climatec will significantly expand Bosch’s Integrator Business in North America. Today the combined entity of Bosch Building Technologies (previously Climatec and Paladin Technologies) represents over $800M in revenues and 2800 associates. Utilizing the strengths of both companies, Bosch offers its customers a complete portfolio of networked and efficient energy, building automation and security solutions. Job Summary: The BIM Manager is a hybrid position, reporting to the Director of Design. This position will require the BIM Manager to perform BIM modeling and coordination tasks daily, while concurrently assisting to develop and maintaining the Revit standards, families, project templates, workflows, and procedures within Paladin Technologies. In addition to 3D BIM work, the BIM Manager is also expected to assist where needed with traditional 2D CAD work. The BIM Manager will work to support corporate objectives by maintaining the highest quality of service to the requestor, whether an internal Paladin Technologies employee or an external customer. Responsibilities: • Working in both 2D and 3D drafting programs, including but not limited to AutoCAD, REVIT, BIM360, and Navisworks, develop detailed models and subsequent drawings needed for the generation of Structured Cabling Systems, Outside Plant Infrastructure, Audio Visual Systems, Security Systems, DAS, and other technologies or low voltage disciplines., • Assist the Director of Design to develop and maintain BIM/ AutoCAD standards and processes as well as libraries, families, and templates., • Ability to lead and supervise modeling and documenting on project, • Ability to schedule and assign work to meet project deliverables and dates., • Clean and purge background drawings/models for use in PTI Models, • Ability to create models while incorporating all appropriate trades models., • Work with project Coordinators and detailers, • Supervise and back-check others work for accuracy before passing it on to the project team, • Make recommendations to the Director of Design and VDC Manager related to the development of the Paladin BIM/ AutoCAD program to include software, training, and hardware recommendations., • Provide 3D Renderings of Conference Rooms, Data Centers, and IDF/MDF rooms for customer proposal packages, utilizing assets provided by the project Architect or design team., • Develop the BIM Manager individual knowledge base of not just BIM, but also of the various technologies and systems that Paladin Technologies installs for their clients., • Attend BIM coordination meetings and work with architectural firms, real estate developers, MEP consultants, and other trade’s modelers using guidelines provided by the project design team or designated design managers. Be a project partner and an ambassador of Paladin Technologies and provide clear communications and support when addressing clash resolutions within the various project models., • Identification, review, and understanding of every project’s specific Design Intent, BIM Execution Plan, and/or Project Execution Plan is vital to the success of the BIM Manager., • Perform Electronic Takeoffs as required using Autodesk applications or Bluebeam Revu., • Excellent communication skills (both written and verbal) are required as well as the necessary range of soft skills. Additional qualities needed include approachability, personal skills, team-working ability, adaptability, creative thinking, problem solving, the ability to remain calm under pressure, and possess a willingness to teach others within the design group when those opportunities present themselves., • Develop and maintain individual skillsets related to AutoCAD, Revit, BIM360, ACC, Navisworks, Microsoft Office Suite, and Bluebeam Revu., • Perform other miscellaneous design, drafting, modeling or office tasks as directed by the Design Director. The BIM Model is expected to assist the overall design group’s efforts when requested to conduct work outside of their direct modeling work., • Ensure the timely and complete submittal of each drawing set in accordance with the BIM Execution Plan and Design Schedule for each project assigned. Understand all due dates and the remaining work required to meet the next deadline and reach out to a Paladin teammate for support when needed to meet the expected deliverables. In accordance with applicable Company policies/procedures and Federal/State laws, will perform the following supervisory responsibilities: planning, assigning, and directing work; coaching and appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. Professional Competencies: • Ability to function as an effective leader, and inspire, motivate and coach others, • Excellent time-management and organizational skills., • Ability to work in a high-volume atmosphere., • Ability to solve practical problems and carry out responsibilities with minimal supervision, • Excellent interpersonal skills, • Ability to finish projects on time, • Ability to organize workload for effective implementation, • Ability to clearly and concisely present information in one-on-one and small group situations, • Strong customer focus with a proven record of results, • Ability to interact effectively at all levels and across diverse cultures, • Bachelor’s degree in architecture, Engineering, Construction Management, or equivalent amount of experience., • A minimum of 5-7 years of drafting and design experience in the information technology, instrumentation and controls, electronics, and/or security industries, • Ability to create aesthetically pleasing, legible, and accessible drawings., • Experience with the following technologies is required:, • AutoCAD, Revit, Bluebeam Revu, IP networks, low voltage electronics, power and communications, Windows desktop operating system, Microsoft Office, • A strong understanding of the physical security and/or technology industries, including an awareness of complimentary products, technologies, trends, and the general application of physical security technology, • An understanding of and experience with fundamental concepts pertaining to IP networks, low voltage electronics, power, and communications, • A strong command of the English language supported by excellent written and verbal communication skills, • The ability to simultaneously handle multiple tasks and projects and be responsive to changing priorities in a fast-paced environment, • Highly developed analytical and problem-solving skills, • Self-motivated, proactive, and an effective team player, • Willingness to create training plans for all VDC reports., • Experience with the following technologies is an asset:, • Access Control, CCTV (IP and Analog), Intrusion Systems, Client-Server security applications, MS SQL databases, Servers and Storage Arrays, or Microsoft Visio, • Field experience in a construction environment is an asset, • The office is clean, orderly, properly lighted and ventilated. Noise levels are considered low to moderate, • Compensation: $100,00 - $115,00 (DOE), • Working Hours: This position generally works Monday- Friday, overtime and on call when necessary, • Travel Requirements: N/A, • Benefits:, • Medical, • Dental, • Vision, • Flexible Spending Accounts, • 401K w/ company match, • Life/AD&D/LTD, • Paid Vacation/Sick/Holidays, • Employee Assistance Program This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. Equal Opportunity Employer, including disability / veterans. All your information will be kept confidential according to EEO guidelines. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Reasonable Accommodations If you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, you can reach out to our HR team for support at 602-944-3330 or email . Please note our HR representatives do not have visibility of application or interview status. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization unavailable.

Job DescriptionTechnician II - SecurityProject ManagerAustin, TX, US Company Info: About Robert Bosch GmbH Headquartered in Germany, Robert Bosch GmbH is a premier global supplier with four primary business sectors: Automotive Technology, Industrial Technology, Consumer Goods, and Energy and Building Technology. Over 400,000+ associates generate sales of over €90 billion. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is “Invented for life.” Ninety-two percent of the share capital of Robert Bosch GmbH is held by Robert Bosch Stiftung GmbH, a charitable foundation. The special ownership structure guarantees the entrepreneurial freedom of the Bosch Group, making it possible for the company to plan over the long term and to undertake significant investments in safeguarding its future. In North America, Robert Bosch LLC supplies automotive original equipment and aftermarket products, industrial drive and control technology, power tool, security and building technology, thermo-technology, household appliances, solar energy, healthcare, and software innovations. Bosch established its regional presence in North America in 1906 and now employs 41,000 associates in more than one hundred locations. Bosch Building Technologies Integrator Business The regional system integration business called Bosch Building Technologies offers solutions and customized services for building security, energy efficiency, and building automation for commercial buildings and infrastructure projects Bosch started its Integrator Business in North America through the acquisition of Climatec in 2015. Climatec expanded Bosch’s role as a comprehensive supplier of energy, building automation and security solutions. Climatec is recognized in the building industry as an independent single-source integrator of critical building systems including energy services, building automation and security & life safety in the U.S. market. The company provides consulting, planning, implementation and 24/7 remote management. Climatec is active in several market segments and industries including data centers, commercial real estate buildings, and federal, state, and local government. Climatec has operated as an independent entity, maintaining its offices in Arizona, California, Nevada, Texas, New York, and New Jersey. Climatec continues to represent and integrate numerous leading manufactures’ product lines across its wide range of services, including Bosch products. In 2023, Bosch acquired Canadian-based security integrator Paladin Technologies. Merging Paladin Technologies and Climatec will significantly expand Bosch’s Integrator Business in North America. Today the combined entity of Bosch Building Technologies (previously Climatec and Paladin Technologies) represents over $800M in revenues and 2800 associates. Utilizing the strengths of both companies, Bosch offers its customers a complete portfolio of networked and efficient energy, building automation and security solutions. Job Summary: As a Bosch Building Technologies Project Manager, you will work closely with multiple teams within Bosch BT as well as clients and subcontractors to, scope, plan and build highly complex projects using the latest technology from the best vendors, including Lenel, Genetec, Axis, Milestone and Avigilon. Tasked with managing every aspect, from start to finish, of our major projects for new construction, you are responsible for delivering high-quality project results. You will manage the project team as efficiently as possible while representing Bosch BT in a professional manner in line with our values of a leadership mindset, people development, team, and client focused. Past experience managing large, multi-million-dollar projects will be a strong asset for this position. Stakeholder engagement across complex organizations and within Bosch will be an important part of this role as well. Responsibilities: • Develop and manage schedules for on-time delivery, monitor budgets to control costs and maintain financial health, • Develop and manage project plan: includes plans for client communication expectations, project resource requirements and availability, procurement and management of materials and reconciliation, project commissioning, development of risk management and mitigation strategies, scheduling to ensure efficiency, in-depth knowledge and understanding of stakeholder's expectations and requirements, • Provide accurate financial reports for performance targets to meet the desired profit margin, • Develop and maintain long-term client relationships that lead to repeat business and business development opportunities, • Create documentation and ensure it clear, easy to follow, updated as per communication schedule, and accessible to all stakeholders, • Control costs and maximize productivity through the implementation of best practices and standard processes, • Effectively manage and maintain all written and verbal project communications, both formal and informal, • Maintain client satisfaction and promptly resolve any concerns, • Develop relationships with subcontractors to build a pool of resources; manage selection of subcontracts for projects, where required, • 3+ years of experience in an administrative role, project management, or technical experience all in an Infrastructure Installation, Structured Cabling or security system or a system integration environment, • Valad driver's license, • Excellent written and verbal communication, as well as interpersonal skills, • Strong computer skills, with proficiency in Microsoft Office and project software, • Able to work independently, manage time effectively, and work with multiple deadlinesPreferred Qualifications:, • Associate’s degree (2 year) or bachelor's degree (4 year) in a technical capacity, • Project Management Professional (PMP) certification is beneficial but not required, • Professional Engineering designation is beneficial but not required, • BICSI certification / standards (strongly preferred)Physical Demands: In general, the following physical demands are representative of those that must be met by an employee to successfully perform the essential functions of the job., • Must be able to effectively communicate in English, (ie see, hear, speak and write clearly) in order to communicate with colleagues and/or customers, • Manual dexterity required for occasional reaching, lifting of light office objects, and operating office equipment, • Sitting, standing, walking in office environments and construction sitesWorking Conditions: In general, the following conditions of the work environment are representative of those that an employee encounters while performing the essential functions of this job., • Compensation: DOE, • Working Hours: This position generally works Monday- Friday, overtime and on call when necessary Associates and their eligible family members are offered comprehensive medical, dental, and vision plan options as well as company-provided basic life insurance, AD&D, short-term and long-term disability, and access to the employee assistance program. Voluntary benefit options include supplemental life and AD&D insurance, accident, critical illness, and hospital indemnity insurance plans, identity theft protection, pet insurance, and HSA and FSA account options. Associates also have the option to enroll in the company’s 401(k) plan. In addition, associates receive PTO (paid time off), state-mandated sick leave, and 9 paid holidays. Benefits are effective on their first day of employment 401(k) employer match of $0.50 for every $1.00 contributed by the associate up to 6% of earnings. Equal Employment Opportunity Statement This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. Equal Opportunity Employer, including disability / veterans. All your information will be kept confidential according to EEO guidelines. Reasonable Accommodations If you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, you can reach out to our HR team for support at 602-944-3330 or email . Please note our HR representatives do not have visibility of application or interview status. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization unavailable.

Familiarity with LV/data center systems (structured cabling, security, OOB networks) and integration to DCIM/BMS. Executive report accuracy and predictability; variance explanations supported by data. Only Oracle brings together the data, infrastructure, applications, and expertise to power everythi

Architecting, constructing, operating and innovating the telecommunications and structured cabling infrastructure within our data centers is fundamental to ensuring high availability, the capacity to meet our extreme growth demands and obtaining the most robust and cost effective online service in t

Job Description Bosch Building Technologies – BIM Specialist About Robert Bosch GmbH Headquartered in Germany, Robert Bosch GmbH is a premier global supplier with four primary business sectors: Automotive Technology, Industrial Technology, Consumer Goods, and Energy and Building Technology. Over 400,000+ associates generate sales of over €90 billion. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is “Invented for life.” Ninety-two percent of the share capital of Robert Bosch GmbH is held by Robert Bosch Stiftung GmbH, a charitable foundation. The special ownership structure guarantees the entrepreneurial freedom of the Bosch Group, making it possible for the company to plan over the long term and to undertake significant investments in safeguarding its future. In North America, Robert Bosch LLC supplies automotive original equipment and aftermarket products, industrial drive and control technology, power tool, security and building technology, thermo-technology, household appliances, solar energy, healthcare, and software innovations. Bosch established its regional presence in North America in 1906 and now employs 41,000 associates in more than one hundred locations. Bosch Building Technologies Integrator Business The regional system integration business called Bosch Building Technologies offers solutions and customized services for building security, energy efficiency, and building automation for commercial buildings and infrastructure projects Bosch started its Integrator Business in North America through the acquisition of Climatec in 2015. Climatec expanded Bosch’s role as a comprehensive supplier of energy, building automation and security solutions. Climatec is recognized in the building industry as an independent single-source integrator of critical building systems including energy services, building automation and security & life safety in the U.S. market. The company provides consulting, planning, implementation and 24/7 remote management. Climatec is active in several market segments and industries including data centers, commercial real estate buildings, and federal, state, and local government. Climatec has operated as an independent entity, maintaining its offices in Arizona, California, Nevada, Texas, New York, and New Jersey. Climatec continues to represent and integrate numerous leading manufactures’ product lines across its wide range of services, including Bosch products. In 2023, Bosch acquired Canadian-based security integrator Paladin Technologies. Merging Paladin Technologies and Climatec will significantly expand Bosch’s Integrator Business in North America. Today the combined entity of Bosch Building Technologies (previously Climatec and Paladin Technologies) represents over $800M in revenues and 2800 associates. Utilizing the strengths of both companies, Bosch offers its customers a complete portfolio of networked and efficient energy, building automation and security solutions. Job Summary: This position will require the BIM Specialist to perform BIM modeling and coordination tasks daily, while concurrently assisting to develop the Revit standards, families, project templates, workflows, and procedures within Paladin Technologies. In addition to 3D BIM work, the BIM Specialist II is also expected to assist where needed with traditional 2D CAD work. The BIM Specialist II will work to support corporate objectives by maintaining the highest quality of service to the requestor, whether an internal Paladin Technologies employee or an external customer. Responsibilities: • Working in both 2D and 3D drafting programs, including but not limited to AutoCAD, REVIT, BIM360, and Navisworks, develop detailed models and subsequent drawings needed for the generation of Structured Cabling Systems, Outside Plant Infrastructure, Audio Visual Systems, Security Systems, DAS, and other technologies or low voltage disciplines., • Assist the Director of Design and VDC Manager to develop and maintain BIM/ AutoCAD standards and processes as well as libraries and templates., • Make recommendations to the Director of Design and VDC Manager related to the development of the Paladin BIM/ AutoCAD program to include software, training, and hardware recommendations., • Provide 3D Renderings of Conference Rooms, Data Centers, and IDF/MDF rooms for customer proposal packages, utilizing assets provided by the project Architect or design team., • Develop the BIM Specialist II’s individual knowledge base of not just BIM, but also of the various technologies and systems that Paladin Technologies installs for their clients., • Attend BIM coordination meetings and work with architectural firms, real estate developers, MEP consultants, and other trade’s modelers using guidelines provided by the project design team or designated design managers. Be a project partner and an ambassador of Paladin Technologies and provide clear communications and support when addressing clash resolutions within the various project models., • Identification, review, and understanding of every project’s specific Design Intent, BIM Execution Plan, and/or Project Execution Plan is vital to the success of the BIM Specialist II., • Perform Electronic Takeoffs as required using Autodesk applications or Bluebeam Revu., • Excellent communication skills (both written and verbal) are required as well as the necessary range of soft skills. Additional qualities needed include: approachability, personal skills, team-working ability, adaptability, creative thinking, problem solving, the ability to remain calm under pressure, and possess a willingness to teach others within the design group when those opportunities present themselves., • Develop and maintain individual skillsets related to AutoCAD, Revit, BIM360, ACC, Navisworks, Microsoft Office Suite,and Bluebeam Revu., • Perform other miscellaneous design, drafting, modeling or office tasks as directed by the Design Manager. The BIM Specialist II is expected to assist the overall design group’s efforts when requested to conduct work outside of their direct modeling work., • Ensure the timely and complete submittal of each drawing set in accordance with the BIM Execution Plan and Design Schedule for each project assigned. Understand all due dates and the remaining work required to meet the next deadline and reach out to a Paladin teammate for support when needed to meet the expected deliverables., • A minimum of 3-5 years of drafting and design experience in the information technology, instrumentation and controls, electronics, and/or security industries, • Post secondary education from an accredited college, university or technical institution in Electronics, Information Technology or related field, • Ability to create aesthetically pleasing, legible, and accessible drawings., • Experience with the following technologies is required:, • AutoCAD, Revit, Bluebeam Revu, IP networks, low voltage electronics, power and communications, Windows desktop operating system, Microsoft Office, • A strong understanding of the physical security and/or technology industries, including an awareness of complimentary products, technologies, trends, and the general application of physical security technology, • An understanding of and experience with fundamental concepts pertaining to IP networks, low voltage electronics, power, and communications, • A strong command of the English language supported by excellent written and verbal communication skills, • The ability to simultaneously handle multiple tasks and projects and be responsive to changing priorities in a fast-paced environment, • Highly developed analytical and problem solving skills, • Experience with the following technologies is an asset:, • Access Control, CCTV (IP and Analog), Intrusion Systems, Client-Server security applications, MS SQL databases, Servers and Storage Arrays, or Microsoft Visio, • Compensation: $28.00 - $35.00/hour (DOE), • Working Hours: This position generally works Monday- Friday, overtime and on call when necessary, • Travel Requirements: N/A, • Benefits:, • Medical, • Dental, • Vision, • Flexible Spending Accounts, • 401K w/ company match, • Life/AD&D/LTD, • Paid Vacation/Sick/Holidays, • Employee Assistance Program This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. Equal Opportunity Employer, including disability / veterans. All your information will be kept confidential according to EEO guidelines. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Reasonable Accommodations If you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, you can reach out to our HR team for support at 602-944-3330 or email . Please note our HR representatives do not have visibility of application or interview status. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization unavailable.

Job Description KS Staffing Group is currently seeking experienced Cable Technicians long-term in a telecommunications and low voltage environment. This role is ideal for technicians with Level 2 (L2) experience who are comfortable working independently and within a team setting. Technician at a higher level are encouraged to apply to as opportunities are also available with a negotiable rate. Job Responsibilities • Install, terminate, and test low voltage cabling (Cat5e, Cat6, fiber as needed), • Perform cable routing, pulling, dressing, and labeling, • Install and wire low voltage panels and telecommunications equipment, • Rack and stack network equipment, • Read and interpret blueprints, schematics, and wiring diagrams, • Troubleshoot connectivity and performance issues, • Maintain clean and organized work areas, • L2 experience preferred, • 2+ years of structured cabling or telecommunications experience, • Experience with low voltage panel installation, • Ability to terminate RJ45, patch panels, and network drops, • Basic understanding of fiber is a plus, • Ability to work from ladders and lifts, • Reliable transportation, • ($25–$26/hour DOE), • Long-term stable opportunity, • Weekly pay Apply Today Submit your resume for immediate consideration. KS Staffing Group –512-843-0010 Equal Opportunity Employer KS Staffing Group provides equal employment opportunities without regard to race, color, religion, gender, national origin, age, disability unrelated to an individual’s ability to perform adequately, sexual orientation, marital status, or any other characteristic protected by law. Company DescriptionLet’s get started on starting your new career! Contact Us Today!! 281-815-4988Let’s get started on starting your new career!\r\nContact Us Today!! \r\n281-815-4988

Job DescriptionDescription:Senior Network Engineer(Full-Time) Circuit of The Americas (COTA) is a 365-entertainment destination for world-class events located in Austin, TX. The sports and entertainment portfolio at COTA is unmatched in the country with Formula 1 US Grand Prix, NASCAR and MotoGP attracting global fans during championship races on the famed Circuit and Live Nation producing over 30 headline concerts every year at the Germania Insurance Amphitheater. Opening in 2026, COTA’s amusement park, COTALAND, is on over 30-acres featuring two first of their kind Roller Coasters and 30 rides. Job Description: As the Senior Network Engineer, you will partner with our team to work on several projects including upgrading our networks at our campus. In this position, you assess our current operations, identify weaknesses, and install the hardware and software necessary to fix them. This may include tasks as simple as installing firewalls or a VPN, or completely revising our wireless internet system. This is a Full-Time onsite role. Essential Functions: • Support the IT infrastructure for major race events, • Responding to emergency outages promptly, • RJ-45 and Fiber Cabling and troubleshooting, • Configuring and troubleshooting wireless technologies like Office WLAN, BYOD, Guest Sponsor Portal, • Monitor Network equipment via SEIM, • Monitoring, investigating and retiring equipment alarms, • Excellent communication and conversation skills (Verbal and Written). Perform root cause analysis., • Should be willing to work extra hours / weekends during Major Events, i.e. Formula 1, NASCAR, MotoGP, Concerts and Track Events. Requirements: Knowledge, Skills, and Abilities • Experience supporting Cisco equipment. (Routing and switching); Cisco IOS, Nexus, WLC, Meraki, • Certifications: CompTIA Network+, CCNA, CCNP R&S, • Strong understanding of 802.11 radio frequency (RF) link performance, reliability, and quality, • Network Automation with Ansible, • Certificate based authentication, • Strong troubleshooting skills, • Strong documentation and organizational skills, • Must maintain composer in from of clients and vendors, • Strong interpersonal skills; can effectively communicate and relate to all levels within and outside the organization; create and build positive and productive relationships., • Hires outstanding candidates; has sound judgment in identifying strengths and weaknesses of others., • Drives the team and the organization for results in order to improve bottom line performance; able to make timely or planned decisions appropriate to the circumstances or situation., • Ability to make tough decisions, gains input from others and moves decisions forward in the organization., • Responds quickly and effectively to changing trends and circumstances; embraces change and welcomes fresh perspectives; learns from past mistakes and adjusts accordingly., • Ability to manage appropriate steps to get projects completed; has strong abilities to organize people and processes; can create a plan for resourceful workflow., • Bachelor’s degree in Computer Science, • CCNA Certification, • Several years of Network Engineering Experience, • Comfortable working with LAN and WAN Network, • Physical Demand & Work Environments:, • Ability to stand, sit, use of hands to handle, or feel, reach with hands and arms., • Ability to lift and/ or move up to 25 pounds., • Ability to squat, bend, twist, push/pull., • Ability to stand/walk for long periods., • Specific vision abilities required by this job include close vision and distance vision., • Work in extreme environments outdoors throughout the year., • The noise level in the work environment is usually moderate but can be loud during events. Salary commensurate with experience. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job. EQUAL EMPLOYMENT OPPORTUNITY: COTA strongly supports equal employment opportunity for all applicants regardless of race, color, religion, sex, gender identity, pregnancy, national origin, ancestry, citizenship, age, marital status, physical disability, mental disability, medical condition, sexual orientation, genetic information, or any other characteristic protected by state or federal law.

Job Description At GFiber, we believe that great internet has the power to drive innovation, strengthen communities, enable the impossible, and do all the everyday things that make all of our world go round. And the job of creating better internet is never done - so we're growing! Our team is committed to building a place where people who want to make a difference can grow their careers and find their spot to belong. GFiber is an Alphabet company that brings Google Fiber and Google Fiber Webpass internet services to homes and businesses across the United States. Our teams are expanding as we connect more cities and people to exceptional internet. The application window will be open until at least March 13th, 2026. This opportunity will remain online based on business needs which may be before or after the specified date. The Field Operations team is responsible for the installation, maintenance, and repair of residential and small business services. Within the Field Operations department, the Field Service Center team is responsible for dispatching and technical support of GFiber's Field Technicians, helping to expand and maintain GFiber's Wired and Wireless customer installations and network construction. Role Description The Field Services Center Technician II supports the dispatch and technical support of: installing and repair of GFiber services, repair and maintenance of Outside and Inside Plant, planned maintenance, and preventative maintenance. Your primary responsibilities will require the use of service support software such as Salesforce - Field Service Lightning (FSL), Oracle Field Service Cloud (OFSC), GIS mapping systems and understanding of how to diagnose and correct all service impacting root causes from the central office, remote terminal or hut location to the customer premise equipments such as: • Impairments to/with all connections, • Drop cabling, • Network interface units, patch panels, • Media cabinets, • ONTs, • Inside wiring (fiber, ethernet , including backup powering, UPS, etc.), • Media gateways, Modems, Routers, switches, • OSP Cabling, • Resolve complex issues by troubleshooting impacted residential and small business services., • Coordinates multiple repair and maintenance resources for Outside Plant (OSP) on concurrent incidents., • Coordinate install fulfillment dispatch including route optimization and handling calls from technicians., • Have knowledge of installation and test of Ethernet jacks, making cross connects in telecom spaces (MDF, IDF, HDF) working with fiber optic cables, installing radio mounts, tuning microwave point-to-point radios and performing installation/construction duties, maintenance and troubleshooting., • Navigate complex customer interactions with exceptional client service, professionalism, and thoroughness., • 3 years experience in Fiber to the Home (FTTH) / Gigabit Passive Optical Network (GPON) /10 Gigabit Passive Optical Network (XGS) network construction and/or large scale fiber network deployments., • 3 years of experience managing relationships with a variety of contractors and vendors., • 3 years of experience in GIS or equivalent mapping systems., • Ability to work non-standard working hours including nights, weekends, holidays, and differing work rotations/shifts., • Experience using a computer in a professional setting., • 3 years experience with field services dispatch in telecom or similar industry., • 3 years of experience in fiber splicing for both termination and midspan use cases, OTDR and Power Meter fiber optic testing., • 3 years of experience with fiber to the B2B/Enterprise level fiber network construction/operations., • Experience troubleshooting Ethernet network issues related to routers, switches and hubs., • Experience with rack and stack work, assembling server stanchions, telemetry closet work (MPOE, DMARC, etc.), and patch panels., • Experience operating Google Workspace, Oracle Field Services Cloud (OFSC), and/or Salesforce - Field Service Lightning (FSL). The US base salary range for this full-time position is between $74,000 - $81,000 + bonus + benefits. Your recruiter will share more about the specific salary range for your targeted location during the hiring process. GFiber is committed to equal opportunity employment regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, gender identity, age, citizenship, marital status, disability or Veteran status. Disclosure is voluntary, and this information will be kept confidential in compliance with Google's Candidate Privacy Policy. For more information please refer to our Equal Employment Opportunity Policy and the EEOC's "Know your rights: workplace discrimination is illegal" (PDF). It's important to us to create an accessible, inclusive workplace for everyone. If you have a need that requires accommodation, please let us know by completing our accommodations for applicants form. Our candidate accommodations team will then connect with you to confidentially discuss your options.

Job Description Arborist Account Manager Are you currently working in the tree care industry and looking to make a change? Want to work in a culture focused on safety and professionalism? Would you enjoy working for a growing company? Join us at Joshua Tree Experts, Austin's premier tree care company, as we are now accepting applications from qualified and skilled Arborist Account Managers. This pivotal role offers a golden opportunity to apply your expertise in Tree and Plant Health Care while enjoying an exceptional and rewarding earning potential. The Arborist Account Manager position is not just a job; it's a year-round adventure filled with challenges and rewards. Bring your knowledge and experience in tree care, tree evaluation, plant health care (PHC), and industry-approved practices to the forefront. We are seeking your hands-on proficiency in estimating and marketing tree services, along with a keen insight into the logistical essentials needed for the triumph of arboricultural practices. As the Arborist Account Manager, your main responsibilities include: • Using consultative sales techniques for sales prospecting and building lasting business relationships, • Proposing job costs and providing timely estimates to both prospects and clients, • Negotiating contracts and collaborating with office staff to schedule work, • Creating work orders and instructing crews on key job scope elements to ensure client expectations are met, • Setting up crews, communicating ongoing work, and ensuring job completion to client satisfaction, • Following up with customers promptly after job completion to address any concerns and ensure satisfaction, • Obtaining referrals, networking with peers, and actively seeking new business opportunities, • Demonstrating ethical behavior, integrity, and promoting a positive Company culture as a role model., • Accurately estimate time and costs for crews performing pruning, removal, cabling, stump grinding, and plant health tasks., • Conduct site inspections to prepare proposals., • Build and maintain long-term client relationships with timely follow-ups., • Maintain a neat, clean, and professional appearance on customers' properties, following the Joshua Tree Sales Standard., • Collaborate with the marketing team to develop and implement marketing campaigns and initiatives., • Attend industry events and conferences to build relationships and promote the Joshua Tree Experts brand., • Knowledge of tree identification and plant health care, including insect and disease management., • ISA Certified Arborist certification, • Effective pricing of tree care recommendations and other services., • Proven sales track record with the ability to meet sales goals., • Excellent customer service, telephone etiquette, and organizational skills., • Ability to multitask, prioritize, identify problems, and collaborate on solutions., • Attention to detail, analytical skills, and basic computer and math proficiency., • Strong listening, verbal, and written communication skills., • High school diploma., • 4 - 5 years working knowledge of arboriculture., • Certified as an Arborist., • Customer service, prospecting, and communication skills., • Strong persuasion, negotiation, and closing skills., • Flexibility to work varying hours to meet job demands., • Valid driver's license. Discover the endless possibilities that lie ahead with us! At Joshua Tree Experts, we firmly believe that the brilliance of our future is shaped by the exceptional talent within our team. If you yearn to be recognized for your hard work, thrive in an environment where you can contribute with minimal supervision, and aspire to make a real impact both for your company and the clients you serve, then we invite you to connect with us for an interview.

Job Description Bosch Building Technologies – System Designer III About Robert Bosch GmbH Headquartered in Germany, Robert Bosch GmbH is a premier global supplier with four primary business sectors: Automotive Technology, Industrial Technology, Consumer Goods, and Energy and Building Technology. Over 400,000+ associates generate sales of over €90 billion. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is “Invented for life.” Ninety-two percent of the share capital of Robert Bosch GmbH is held by Robert Bosch Stiftung GmbH, a charitable foundation. The special ownership structure guarantees the entrepreneurial freedom of the Bosch Group, making it possible for the company to plan over the long term and to undertake significant investments in safeguarding its future. In North America, Robert Bosch LLC supplies automotive original equipment and aftermarket products, industrial drive and control technology, power tool, security and building technology, thermo-technology, household appliances, solar energy, healthcare, and software innovations. Bosch established its regional presence in North America in 1906 and now employs 41,000 associates in more than one hundred locations. Bosch Building Technologies Integrator Business The regional system integration business called Bosch Building Technologies offers solutions and customized services for building security, energy efficiency, and building automation for commercial buildings and infrastructure projects Bosch started its Integrator Business in North America through the acquisition of Climatec in 2015. Climatec expanded Bosch’s role as a comprehensive supplier of energy, building automation and security solutions. Climatec is recognized in the building industry as an independent single-source integrator of critical building systems including energy services, building automation and security & life safety in the U.S. market. The company provides consulting, planning, implementation and 24/7 remote management. Climatec is active in several market segments and industries including data centers, commercial real estate buildings, and federal, state, and local government. Climatec has operated as an independent entity, maintaining its offices in Arizona, California, Nevada, Texas, New York, and New Jersey. Climatec continues to represent and integrate numerous leading manufactures’ product lines across its wide range of services, including Bosch products. In 2023, Bosch acquired Canadian-based security integrator Paladin Technologies. Merging Paladin Technologies and Climatec will significantly expand Bosch’s Integrator Business in North America. Today the combined entity of Bosch Building Technologies (previously Climatec and Paladin Technologies) represents over $800M in revenues and 2800 associates. Utilizing the strengths of both companies, Bosch offers its customers a complete portfolio of networked and efficient energy, building automation and security solutions. Job Summary: The System Designer III will be required to provide design, engineering, modeling, drafting, and budgeting support for projects throughout the organization, across all North American Geographies. Additionally, they will assist the Design Group Leadership and Colleagues in continuing to build our company design standards, templates, blocks, families, details, and processes. Responsibilities: • Coordinate and interact with customers (end users, architects, construction managers, general contractors, electrical engineers, and others) to understand their needs and then perform detailed designs Low Voltage technology systems such as Cabling, Security, Audio Visual and DAS., • A Systems Designer may specialize in one Low Voltage Trade, but all Systems Designers are expected to pursue cross training across disciplines., • Attend and host meetings independently on behalf of Paladin. Take and distribute accurate and timely notes to the team, follow up with action items assigned and communicate company commitments., • Coordinate and interact with estimators and engineers throughout the organization, including all geographies across North America, to develop project budgets, technical design requirements and scopes of work related to the design of all sub-disciplines of Low Voltage Technology Systems., • Coordinate and interact with the Sales team and other Project Sponsors to understand the needs and expectations of the client and project and to ensure the best possible client experience., • Prepare detailed and accurate budgets, utilizing technical estimating resources where necessary., • Perform electronic takeoffs using Bluebeam software as directed., • Manage the Designers assigned projects to include billing, cash flow, cost projections and schedule management., • Create technology systems flow line diagrams., • Develop Security riser diagrams, door details, and mounting diagrams., • Develop network diagrams., • Perform the Designer’s own drafting and modeling using Autodesk CAD and Revit software as needed and as practical., • Coordinate and collaborate closely with Paladin’s Drafters and BIM Modelers to provide clear CAD requests, feedback, and guidance for Drafting and modeling work related to the Designers projects that will be performed by the VDC team., • Provide supplemental Peer Reviews of designs and documentation prepared by others throughout the organization as directed., • Participate in both internal and external kickoff meetings as needed to support a smooth transition and exchange of information as a project passes from the design to the build phase., • Perform construction administration on design projects as assigned., • Provide advice, assistance and support to estimators, engineers, project managers and other Paladin employees when requested., • Provide support for existing or potential customers with the utmost professionalism at all times whether on the phone, in writing (email or text/direct message) or in person., • Effectively and professionally manage multiple communications platforms (email, collaboration/messaging (MS Teams), • Increase AV & Security Systems knowledge periodically throughout the year., • Increase Networking knowledge periodically throughout the year., • Maintain and increase industry recognized certifications like CTS, CSPM, etc., • Maintain and stay current with Voice/Data Cabling Systems knowledge periodically throughout the year., • Increase and maintain knowledge of current product offerings for Video Management Systems, Audio/Visual control and distribution systems, cameras, access control management platforms, and other low voltage technology components., • 5+ years of design experience, • 5+ year of experience in the low voltage or technology industry, primarily structured cabling, • Competency in various software platforms typical in the design industry, including (but not limited to): AutoCAD, Revit, MS Office Suite (Word, Excel, Outlook) MS Teams, MS Projects, etc., • Compensation: $118,000 - $135,000 (DOE), • Working Hours: This position generally works Monday- Friday, overtime and on call when necessary, • Travel Requirements: N/A This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. Equal Opportunity Employer, including disability / veterans. All your information will be kept confidential according to EEO guidelines. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Reasonable Accommodations If you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, you can reach out to our HR team for support at 602-944-3330 or email . Please note our HR representatives do not have visibility of application or interview status. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization unavailable.

Job Description We are hiring experienced Fiber Splicers for a high-priority project in San Antonio, TX. This is a contract-to-hire opportunity with a targeted start date of February 9th. Job Details • Pay: $37/hr, • +$2/hr night shift differential, • Schedule:, • Day and Night shifts available, • Monday–Friday 5x10s, • Location: San Antonio, TX, • Type: Contract-to-Hire Required Qualifications (Non-Negotiable) • Ribbon fiber splicing experience (must be hands-on and recent), • Minimum 1+ year of dedicated fiber splicing experience, • 3+ years of structured cabling experience, ideally in a data center / data warehouse environment, • Experience working in ISP & OSP environments, • Hands-on experience with high-count fiber (3,456–6,912 strand), • OSHA 10 certification

Job Description OUR COMPANY: EOS IT Solutions is a Global Technology and Logistics company, providing Collaboration and Business IT Support services to some of the world's largest industry leaders, delivering forward-thinking solutions based on multi-domain architecture. Customer satisfaction and commitment to superior quality of service are our top business priorities, along with investing in and supporting our partners and employees. We are a true International IT provider and are proud to deliver our services through global simplicity with trusted transparency. WHAT YOU WILL DO: As a Tier 2 Audio Visual Field Technician, you will play a key role in supporting our project delivery teams by installing and maintaining a wide variety of AV technologies across client sites. You will be responsible for ensuring high-quality installations, troubleshooting technical issues, and maintaining strong communication with project stakeholders. **THIS POSITION REQUIRES UP TO 70% TRAVEL. KEY RESPONSIBILITIES: • Provide daily reporting to the Project Management team., • Install a wide variety of AV technology in both existing and new build project sites., • Perform cable management and layout planning for 1st fix hardware, including bracketry and ceiling speaker hardware., • Ensure compliance with general contract requirements during installations., • Apply knowledge of low voltage electrical concepts., • Utilize basic carpentry and installation skills., • Operate power tools safely and effectively., • Diagnose, troubleshoot, and resolve technical problems., • Travel to other sites as needed to support projects and installations. ESSENTIAL CRITERIA: • Experience with AV systems such as Crestron, Extron, QSYS, or Cisco., • Understanding of signal flow and AV rack building to AVIXA standards., • Familiarity with AV industry cabling and connector termination., • Strong sense of urgency and agility in dynamic environments., • Excellent customer interaction skills and professionalism., • Ability to work independently in high-pressure, fast-paced settings., • Commitment to ongoing technical development., • Willingness and eligibility to travel and work globally., • Strong organizational and time management skills., • Effective written and verbal communication., • Critical thinking and problem-solving abilities., • Flexibility and adaptability to changing work hours and customer needs., • Team-oriented mindset., • 1–3 years of experience in the AV/VC industry., • Deeper knowledge of signal flow and AV installation., • Familiarity with Cisco, Extron, Crestron, or QSYS systems., • AVIXA CTS or CTS-I certification., • OSHA 10/30 or SST certification. EOS is committed to creating a diverse and inclusive work environment and is proud to be an equal opportunity employer. We invite you to consider opportunities at EOS regardless of your gender; gender identity; gender reassignment; age; religious or similar philosophical belief; race; national origin; political opinion; sexual orientation; disability; marital or civil partnership status or other non-merit factor. The EOS pay range for this job is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, experience, education, knowledge, skills, and abilities, as well as internal equity, market data, or other laws. #LI-CC1 Pay Range$32—$41 USD

Job Description Job Title: Low Voltage Cabling Technician (Full-Time) Location: Austin, TX (Work Across Data Centers in the USA) Position Overview: We are seeking a Low Voltage Cabling Technician to join our client's team and support the daily project life cycles in live data centers. In this role, you will be responsible for installing fiber optics and copper cables on predetermined routes within the data center. You will work closely with a team, and all tasks will be supervised and coordinated by the team leader. This position requires manual handling and often involves working at low heights using mobile working platforms (electric or non-electric). Key Responsibilities: • Unbox and unpack cables., • Scan cable barcodes using the provided client scanner., • Label cables according to the cable schedule., • Pull and route cables along designated paths., • Professionally dress cables with velcro wraparound ties., • Patch cables into the correct ports on switches., • Work safely using the provided Personal Protective Equipment (PPE) and mobile working platforms.Requirements:, • Experience in installing copper and fibre optic cables., • Strong attention to detail., • Ability to follow instructions and work as part of a team., • Basic understanding of data centre environments is preferred., • Capable of manual handling and working at low heights.Work Schedule:, • Monday to Friday, 8:00 AM - 5:00 PM (1-hour lunch break).Benefits:, • PPE provided when needed., • Opportunity to work on live data centre projects across the USA. By applying to this job, as part of our typical recruiting process, from time to time, we may contact you regarding positions that we feel are a good fit for you or engage with you during the recruiting process via SMS text message. Message and data rates may apply, depending on your mobile phone service plan. At any time you can get more help by replying HELP to these texts, or you can opt-out completely by replying STOP. Our Terms of Service are available at . Powered by JazzHR K43Pem5LqQ

Job Description NextGen Security LLC Job Summary Company NextGen Security, LLC Location Austin, TX Industries Security and Surveillance Job Type Full Time Employee Years of Experience 2+ years of installation experience in security industry Career Level Experienced (Non-Manager) Exemption Non-Exempt System Technician What we’re looking for: An experienced electronic security installation technician to join our fast growing and dynamic team. What you’ll be doing: • Physically installing Field cabling and field equipment, • Some System programming What you bring to the table: • Minimum of 2 years of experience with installing and maintaining:, • Electronic access control systems., • IP-Based video management systems, • Networking and IT knowledge., • Superior problem solving and communication skills., • Work independently with minimal supervision., • Familiarization with local electronic security codes and industry standards., • Understanding and ability to work safely in a chemical plant environment., • Experience with Microsoft products such as Outlook, Work, Excel Etc. Preferred • Access Control System Vendor Certifications in Software House, Genetec, ProWatch and/or Lenel or similar., • Video Management System Vendor Certifications in Genetec, OnSSI, MaxPro, and/or Milestone or similar., • Intrusion Detection System Vendor Certifications in Senstar/Optellios, and/or FFT., • Experience in computer operating systems, network design and implementation., • TWIC Cardholder. What we bring to the table: • An awesome, collaborative culture, • Salary based upon background and experience., • Company Vehicle, • Full benefits package, • Paid vacation, • Cellphone Allowance We are an equal opportunity employer and drug- free workplace. Pre-employment drug screens and background checks will be conducted. Employees are subject to appropriate routine drug screens, based on job classification. Application Process Please submit your resume, references and your requested salary range when applying for this position to . More About Us NextGen Security is an electronic security systems integrator that offers commercial and industrial companies best in class industry knowledge, engineering design, implementation, management and on-going maintenance services. Our company accomplishes this by hiring only the most experienced and best-qualified talent the security industry has to offer. Management team and staff members have 10-25 years of commercial and industrial security industry expertise with single site, multi-facility, plant-wide, campus-wide, regional, national and international security projects. If that wasn’t convincing enough, check out what our employees say about working at NextGen: Notice To Employment / Recruitment Agents Employment / Recruitment agents may only submit candidates for vacancies only if they have written authorization to do so from NextGen Security’s HR department. Any agency candidate submission may only be submitted to positions opened to the agency through openings available via NextGen Security’s website. NextGen Security will only pay a fee for candidates submitted or presented where there is a contract communication in place between the Employment / Recruitment agents and NextGen Security, and only if the candidate is submitted via approval from NextGen Security’s HR department. Candidates submitted or presented by Employment / Recruitment Agents without a full approval from NextGen Security’s HR department shall not be deemed to form part of any Engagement for which the Agency may claim remuneration.

Job DescriptionSalary: Base Pay + Quarterly Commission Why Pref-Tech? Voted "Top Workplaces" by Austin American Statesman, 3 years in a row! We aim to make family a core reason we attract incredible people, retain them, and collectively deliver unequaled quality and service to customers. If your heart and mind are pushing you to join a team who deeply desires to be the best in the world, has a long-game approach to business, prides itself on doing exceptional work, celebrates service to others, and is willing to invest in you, you should consider Pref-Tech. Position Overview: The Sales & Design Professional (SDP) at Pref-Tech will develop business opportunities, oversee the design-estimation process, and win profitable contracts that fit within the companys skill sets and roadmap. Required Qualifications: • Must have experience in the Security Integration Industry, • At least 3 years in Outside Sales, • High School Diploma or GED equivalent/Bachelors degree preferred, • Experience in creating estimates, proposals, and designs, • Strong client facing experience, • Experience in executive level selling, • Experience in owning accounts, • Fluency with Microsoft Office 365 software tools, • Exceptional analytical and conceptual thinking skills, • Capacity to work independently and collaboratively Key Responsibilities: • Develop, Identify and Cultivate sales opportunities with strategic clients for Structured Cabling Systems, Electronic Security Systems, A/V Systems and Perimeter Intrusion Systems., • Maintain and grow end user sales activity and potential business., • Achieve revenue and margin objectives., • Generate leads from speaking engagements, tradeshows, networking, and personal selling., • Build and maintain long-term relationships., • Develop customer needs via consultative selling., • Prepare strategic plans regarding daily activities, lead generation, customer contact and structure of calls and appointment and follow-up., • Prepare presentations and sales contracts., • Prepare proposals with detailed scope of work., • Facilitate bidding process with estimation/sales team using MS Outlook., • Engage directly and proactively with Design/Estimation and Operations teams to decisively shape and drive the direction of our product and service offerings., • Attend pre-bids, walk, and review jobsites., • Prepare and Coordinate Project Hand-Over Meetings with Operations., • Develop professionally (Classes, Certifications, Reading, and Training)., • You will be required to attend 2 training events a year., • Make face-to-face presentations., • Identify and resolve client concerns., • Knowledge and experience in design of Pref-Tech products and services., • In-depth knowledge of products and services that Pref-Tech offers., • In-depth knowledge of a rapidly changing market that comprises the products and services that Pref-Tech offers., • Self-starter with a positive outlook and a high level of enthusiasm., • Unwavering drive to develop and increase revenues., • Excellent presentation (development and delivery), verbal and written communication, and interpersonal skills., • Accurately and consistently input data and generate reports for future, current, and closed accounts in the CRM system., • Fully commit to company sales directives and actively participate in internal team exercises to enhance both personal and team growth in business performance Benefits: • Competitive salary with bonus structure plan, paid out quarterly, • 401k Safe Harbor Plan with up to 4% employer match (both Traditional and Roth options available), • Company Vehicle, • Health, dental, vision and other elective insurances (including STD/LTD, Life, etc. elective benefit options), • Laptop, Cellphone, Credit card Work Hours: Hybrid role. Standard workdays and times are Monday Friday, 8:00 a.m. to 5:00 p.m. About 60% of the SDP work can be done remotely. The remaining 40% will include in-person activities such as meetings, networking events, etc. Some travel will be required. Core Values: • Understand, internalize, and represent our PGRIT core values:, • Our expectations are high, we take great pride in our work, and we communicate well., • We thrive on challenges. We do what it takes to get the job done., • We know what right is and do it every time., • Intelligent Thought. We plan meticulously, execute decisively, and resolve issues effectively., • Trusted Advisors. We are experts. We continuously develop our knowledge and transfer that knowledge to each other, our customers, and our vendors., • Fulfill our purpose statement with all decisions and actions:, • Within a family culture, nurture and inspire our employees to creatively resolve customer pain using the highest level of craftsmanship and service. Physical Requirement: This position is primarily office-based and requires the ability to sit for extended periods, operate a computer and standard office equipment, and communicate effectively in person and electronically. Occasional light lifting (up to 15 lbs.) may be required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EEO Statement: Preferred Technologies, LLC is an Equal Opportunity Employer who is committed to workforce diversity. Minorities/Females/Disabled/Veterans are encouraged to apply. Qualified applicants will receive consideration without regard to age, race, color, religion, sex, sexual orientation, disability, or national origin. We offer a smoke-free and drug-free workplace. ADA Accommodation Statement If you require reasonable accommodation to apply for a position or to participate in the interview process, please contact Recruiting at . Candidate Screening: Employment is contingent upon successful completion of background investigation and pre-employment drug screen. Pref-Tech maintains a drug-free workplace and conducts random drug screenings as part of our commitment to safety and compliance. All applications and resumes are held in confidence. Only candidates whose profiles closely match requirements will be contacted for an interview.