Trabajos chemical engineer en Aurora, ColoradoCrear alertas

Aramco energizes the world economy. Aramco occupies a special position in the global energy industry. We are one of the world’s largest producers of hydrocarbon energy and chemicals, with among the lowest Upstream carbon intensities of any major producer. With our significant investment in technology and infrastructure, we strive to maximize the value of the energy we produce for the world along with a commitment to enhance Aramco’s value to society. Headquartered in the Kingdom of Saudi Arabia, and with offices around the world, we combine market discipline with a generations’ spanning view of the future, born of our nine decades experience as responsible stewards of the Kingdom’s vast hydrocarbon resources. This responsibility has driven us to deliver significant societal and economic benefits to not just the Kingdom, but also to a vast number of communities, economies, and countries that rely on the vital and reliable energy that we supply. We are one of the most profitable companies in the world, as well as amongst the top five global companies by market capitalization. We are seeking a Process Engineer specializing in Sulfur Recovery Unit (SRU) to join Jafurah Gas Plant Engineering Division (JGPED) within Jafurah Gas Plant Department (JGPD). JGPED is responsible for Processing Feed gas and producing Sales Gas, Condensate, and C2+NGL. Your primary role is to manage and handle the operations of Sulfur Recovery Units (SRU). As the successful candidate you will be required to perform the following: • Handle process activities such as studies and design modification in the operating facilities and develop simulation models for assigned operation facilities., • Develop & review and/or validate plant mass balances and check plant performance to ensure it is running up to its design., • Use the software simulation programs such as HYSYS and flow assurance., • Formulate and implement long-term strategies to improve operations and reduce costs., • Lead groups of engineers in the shutdown and startup phase of existing plants and participate in standards reviews to assure inclusion of requirements that are of practical benefit to field operation and maintenance in regard to safety and efficiency of the plant., • Provide guidance on standards development through technical committee participation. Interprets standards and recommenced changes to reduce costs associated with overly stringent requirements., • Lead unit performance and capacity tests and prepare testing procedures., • Conduct risk assessment and process equipment performance test., • Lead Process Hazard Analysis (PHA), Hazard and Operability (HAZOP), Energy optimization/conservation and process &equipment optimization & feasibility studies., • Develop implementation plan for critical recommendation and perform management of change (MOC), • Verify system operations and performance after implementing the recommendation., • Provide day to day technical support to operation and maintenance teams, to troubleshoot and fix process equipment., • Bachelor’s degree in Chemical Engineering from a recognized and approved program., • You should have a minimum of 10 to 15 years of professional engineering experience in Sulfur Recovery., • Confident with engineering and design principles related to process engineering., • Experience in process engineering and design applications., • Able to demonstrate a detailed knowledge of industry standards and procedures, such as American Petroleum Institute (API) and American Society of Mechanical Engineers (ASME) codes., • Required to support the review of company standards, projects reviews and implementation of plant modifications to process systems., • Experience with creating Process Flow Diagrams (PFDs) & Piping & Instrumentation Diagrams (P&IDs), troubleshooting process equipment and system failures, including pumps, compressors, pipe line/ piping and dehydration systems and Knowledge of Aspen HYSIS and other process simulation software is required. Work schedule: Full Time - To be specified in Job offer Job posting start date: 12/15/2025 Job posting end date: 12/15/2026 Working environment Our high-performing employees are drawn by the challenging and rewarding professional, technical and industrial opportunities we offer, and are remunerated accordingly. At Aramco, our people work on truly world-scale projects, supported by investment in capital and technology that is second to none. And because, as a global energy company, we are faced with addressing some of the world’s biggest technical, logistical and environmental challenges, we invest heavily in talent development. We have a proud history of educating and training our workforce over many decades. Employees at all levels are encouraged to improve their sector-specific knowledge and competencies through our workforce development programs – one of the largest in the world.

Aramco energizes the world economy. Aramco occupies a special position in the global energy industry. We are one of the world’s largest producers of hydrocarbon energy and chemicals, with among the lowest Upstream carbon intensities of any major producer. With our significant investment in technology and infrastructure, we strive to maximize the value of the energy we produce for the world along with a commitment to enhance Aramco’s value to society. Headquartered in the Kingdom of Saudi Arabia, and with offices around the world, we combine market discipline with a generations’ spanning view of the future, born of our nine decades experience as responsible stewards of the Kingdom’s vast hydrocarbon resources. This responsibility has driven us to deliver significant societal and economic benefits to not just the Kingdom, but also to a vast number of communities, economies, and countries that rely on the vital and reliable energy that we supply. We are one of the most profitable companies in the world, as well as amongst the top five global companies by market capitalization. We are seeking a corrosion engineer to join the Southern Area Asset Integrity Division (SAAID) of SAOP Technical Support Department. SAAID is responsible for providing effective and proactive corrosion management support to safeguard assets while adopting best industry practices and cutting-edge technologies. Your primary role is to perform integrity and corrosion analysis studies to assess current challenges and develop a mitigation plan by implementing cost effective solutions and deployment of advanced and proven technologies to prevent or significantly reduce the impact of corrosion. This is to be supported with benchmarking and implementation of strategies that will enhance the long-term reliability and assets efficiency of our assets. As the successful candidate you will be required to perform the following: • Perform periodical analytical study of corrosion assessment findings to overcome challenging inspection programs, • Research and Deploy emerging Technologies related to corrosion mitigation and non-metallic deployment., • Act as expert corrosion and asset integrity management resource for corrosion risk assessment and mitigation., • Develop Pipeline Integrity Plans (PIP) aligned with the organization integrity performance objectives, assigning responsibilities, and timeframes for the responsible stakeholder., • Develop annual condition assessment schedule in line with the PIP recommendations., • Review PIP trends and initiate detailed engineering studies accordingly (e.g. increase in internal corrosion features, encroachment to pipelines, low quality of ILI reports, failure investigations, etc.), • Facilitate the investigation of corrosion failure and deploy lesson learned from the root cause analysis to the system to avoid reoccurrence., • Perform periodical analytical study of assessment findings to overcome challenging inspection programs., • Evaluate the QA findings and perform periodical analytical study of assessment findings to overcome challenging inspection programs., • Provide consultation on specialized area related to corrosion control., • Perform integrity and corrosion analysis studies to assess current challenges., • Monitor the corrosion parameters such PH, O2, bacteria, residual of biocide chemical, and take corrective actions accordingly., • Review the inspection data and make corrosion control recommendations/reports accordingly., • Review laboratory data/parameters and issue the recommendations accordingly., • Apply corrosion monitoring system/program to ensure the integrity & reliability of the plant assets., • As the successful candidate you should hold a Bachelor’s degree in corrosion Engineering from a recognized and approved program. An advanced degree is preferred., • You will have 15 years-experience in corrosion engineering, including at least three years as senior corrosion engineer., • You must have a comprehensive knowledge of corrosion principles, including electrochemistry, material properties, corrosion mechanisms, and corrosion prevention methods, • You should also have sufficient background in various laboratory and field-testing techniques used to assess corrosion behavior, such as accelerated corrosion testing, electrochemical corrosion monitoring, and non-destructive testing methods., • Familiarity with corrosion prevention and control strategies, including material selection, protective coatings, cathodic protection, corrosion inhibitors, and corrosion monitoring systems is a requirement, • Understanding of industry standards and codes related to corrosion, such as National Association of Corrosion Engineers (NACE), American Society for Testing and Materials (ASTM) International standards, and API (American Petroleum Institute) standards, • Practical experience through entry-level positions or corrosion engineering roles in industries such as oil and gas, aerospace, chemical processing, marine, or infrastructure., • Demonstrate effective analytical and communication skills to collaborate with multidisciplinary teams, prepare technical reports, and present findings to stakeholders. Work schedule: Full Time - To be specified in Job offer Job posting start date: 12/15/2025 Job posting end date: 12/15/2026 Working environment Our high-performing employees are drawn by the challenging and rewarding professional, technical and industrial opportunities we offer, and are remunerated accordingly. At Aramco, our people work on truly world-scale projects, supported by investment in capital and technology that is second to none. And because, as a global energy company, we are faced with addressing some of the world’s biggest technical, logistical and environmental challenges, we invest heavily in talent development. We have a proud history of educating and training our workforce over many decades. Employees at all levels are encouraged to improve their sector-specific knowledge and competencies through our workforce development programs – one of the largest in the world.

Aramco energizes the world economy. Aramco occupies a special position in the global energy industry. We are one of the world’s largest producers of hydrocarbon energy and chemicals, with among the lowest Upstream carbon intensities of any major producer. With our significant investment in technology and infrastructure, we strive to maximize the value of the energy we produce for the world along with a commitment to enhance Aramco’s value to society. Headquartered in the Kingdom of Saudi Arabia, and with offices around the world, we combine market discipline with a generations’ spanning view of the future, born of our nine decades experience as responsible stewards of the Kingdom’s vast hydrocarbon resources. This responsibility has driven us to deliver significant societal and economic benefits to not just the Kingdom, but also to a vast number of communities, economies, and countries that rely on the vital and reliable energy that we supply. We are one of the most profitable companies in the world, as well as amongst the top five global companies by market capitalization. We are seeking an Instrumentation Engineer to join Abqaiq plants operation departments (APOD) specifically System support unit (SSU). SSU is responsible for providing effective and proactive instrumentations, control and safety systems support to safeguard assets while adopting best industry practices and cutting-edge technologies. Your primary role is to design, develop, and implement effective instrumentation solutions to assess current challenges and develop a mitigation plan by implementing cost-effective solutions and deployment of advanced and proven technologies to ensure the reliability and efficiency of our assets. As the successful candidate you will be required to perform the following: • Perform periodical analytical studies of instrumentation system performance to overcome challenging operational programs., • Research and deploy emerging technologies related to instrumentation and control systems., • Act as an expert instrumentation and control systems resource for asset integrity management and risk assessment., • Develop Instrumentation and Control Plans (ICP) aligned with the organization's integrity performance objectives, assigning responsibilities, and timeframes for the responsible stakeholders., • Develop annual maintenance schedules for instrumentation systems in line with the ICP recommendations., • Review instrumentation system trends and initiate detailed engineering studies accordingly (e.g., increase in instrument failures, degradation of system performance, etc.)., • Update the ICP based on the schedule maintenance and modifications., • Ensure instrumentation system obsolescence are addressed by the relevant process owners and track recommendations., • Facilitate the investigation of instrumentation system failures and deploy lessons learned from the root cause analysis to the system to avoid reoccurrence., • Coordinate the updating of the instrumentation system risk register and ensure timely review upon occurrence of incidents in the industry or other similar facilities to reflect that in the risk register and identify applicable systems., • Perform periodical analytical studies of assessment findings to overcome challenging operational programs., • Evaluate the maintenance findings and perform periodical analytical studies of assessment findings to overcome challenging operational programs., • Provide consultation on specialized areas related to instrumentation and control systems., • Perform instrumentation system analysis studies to assess current challenges., • Review instrumentation system data and make recommendations/reports accordingly., • Apply instrumentation system maintenance programs to ensure the integrity and reliability of the plant assets., • Oversee instrumentation system modifications, such as calibration, repair, and replacement, to prevent or minimize system threats., • As the successful candidate, you should hold a Bachelor's degree in Instrumentation Engineering, Electrical Engineering, or a related field from a recognized and approved program. An advanced degree is preferred., • You will have 15 years of experience in instrumentation engineering, including at least three years as a senior instrumentation engineer., • You must have a comprehensive knowledge of instrumentation principles, including measurement techniques, sensor technologies, and control systems., • You should also have sufficient background in various instrumentation technologies, such as distributed control systems (DCS), programmable logic controllers (PLC), and supervisory control and data acquisition (SCADA) systems., • Familiarity with instrumentation standards and codes, such as ISA (International Society of Automation) standards, API (American Petroleum Institute) standards, and IEC (International Electrotechnical Commission) standards, is a requirement., • You must have gained practical experience through entry-level positions or instrumentation engineering roles in industries such as oil and gas, aerospace, chemical processing, marine, or infrastructure., • You must be able to demonstrate effective analytical and communication skills to collaborate with multidisciplinary teams, prepare technical reports, and present findings to stakeholders., • Awareness of the latest advancements in instrumentation technologies through professional development courses, certifications, workshops, conferences, and memberships in relevant industry organizations. Work schedule: Full Time - To be specified in Job offer Job posting start date: 12/15/2025 Job posting end date: 12/15/2026 Working environment Our high-performing employees are drawn by the challenging and rewarding professional, technical and industrial opportunities we offer, and are remunerated accordingly. At Aramco, our people work on truly world-scale projects, supported by investment in capital and technology that is second to none. And because, as a global energy company, we are faced with addressing some of the world’s biggest technical, logistical and environmental challenges, we invest heavily in talent development. We have a proud history of educating and training our workforce over many decades. Employees at all levels are encouraged to improve their sector-specific knowledge and competencies through our workforce development programs – one of the largest in the world.

Process Engineer This role plays a key part in supporting, optimizing, and advancing aseptic liquid processing and packaging operations across multiple food manufacturing sites. You will provide technical expertise, drive improvements in Safety, Quality, and Reliability, and help shape the aseptic product strategy while ensuring all processes meet regulatory, food safety, and performance standards. Responsibilities Include: • Provide technical leadership in aseptic liquid processing and packaging for products including dairy, juices, blended products, concentrates, and pastes., • Troubleshoot, optimize, and maintain aseptic manufacturing lines to improve productivity, quality, and safety., • Develop process and packaging design concepts to support new aseptic products and expand existing lines., • Manage assigned capital and process projects, including budgeting, scheduling, equipment selection, and contractor coordination., • Evaluate and recommend new equipment and technologies; conduct feasibility studies and cost‑benefit analyses., • Prepare and analyze process data for continuous improvement and system optimization., • Participate in industry conferences to stay current on emerging aseptic innovations., • Ensure all solutions incorporate regulatory, personnel safety, and food safety requirements, supporting ongoing SQF system improvements., • Bachelor's degree in Chemical Engineering or related field., • Process Engineering experience in a heavily regulated environment, • Strong communication skills; proficiency in Microsoft Office, project scheduling, and technical reporting., • Demonstrated ability to lead projects through completion with defined results., • Aseptic experience strongly desired, • Experience with ESL, ultra‑clean, or hot‑fill technologies., • Capital project management experience, • Background in hygienic design, food safety, and beverage/dairy processing standards.

Aramco energizes the world economy. Aramco occupies a special position in the global energy industry. We are one of the world’s largest producers of hydrocarbon energy and chemicals, with among the lowest Upstream carbon intensities of any major producer. With our significant investment in technology and infrastructure, we strive to maximize the value of the energy we produce for the world along with a commitment to enhance Aramco’s value to society. Headquartered in the Kingdom of Saudi Arabia, and with offices around the world, we combine market discipline with a generations’ spanning view of the future, born of our nine decades experience as responsible stewards of the Kingdom’s vast hydrocarbon resources. This responsibility has driven us to deliver significant societal and economic benefits to not just the Kingdom, but also to a vast number of communities, economies, and countries that rely on the vital and reliable energy that we supply. We are one of the most profitable companies in the world, as well as amongst the top five global companies by market capitalization. We are seeking a Pilot Plant Process Engineer to join our Research & Analytical Services Department (RASD). RASD hosts sophisticated pilot plant facilities which support relevant research, technology and specialized technical services. RASD is committed to working collaboratively with its customers, building pilot plant assets and finding new ways of developing oil and gas resources, through innovative solutions, technology development and scale-up, and engineering support to corporate operation. Your primary role is to develop innovative solutions to complex technical problems, establish and evaluate design of pilot plants, develop process design basis, prepare detailed engineering packages for building new pilot plants to support R&D project requirements. You will also be developing innovative reactor and process configurations, scaling it up from laboratory scale to pilot and commercial scale using modeling and simulation techniques. As the successful candidate you will be required to perform the following: • Develop solutions to complex problems that require a high degree of innovation and ingenuity., • Participate in the design of pilot plants, including establishing process design basis, development of process options and optimization of selected design., • Participate in developing design of experiment required for R&D and commercial programs., • Prepare specifications (process flow diagram) and operating instructions for pilot plants., • Direct activities to ensure that new pilot plant project schedule, construction, cost estimate, installation and operational testing conform to functional specifications, recognized codes and standards and R&D projects requirements., • Develop kinetic and reactor models using pilot plant data, and scale up the catalyst performance to commercial scale reactors., • Develop innovative reactor and process configurations using kinetics, reactor modeling, process simulation and CFD modeling., • Manage and execute small to medium sized projects., • You will hold a Bachelor Degree in Chemical Engineering. An advanced degree is strongly preferred., • You will have 10+ years of experience in a plant operation or engineering role, with a minimum 5 to 8 years plant site or R&D experience in an oil refinery, chemical plant or similar hydrocarbon industry is desired. A pilot plant competency is a strong plus., • You must have strong skills on kinetics & reactor modeling, using software like MATLAB, Aspen Custom Modeler or gPROMS., • You must have strong skills on process simulation software e.g. Aspen Plus, Aspen HYSYS, Pro/II., • You will have experience in current statutory regulations, industry standards and recommended practices and a practical sense in applying such references., • You will be able to work in an unstructured environment to help develop new systems and infrastructure., • You will have an understanding of area classifications and specification of site equipment., • You will be able to demonstrate hands-on experience in supporting of operations and technical team. Work schedule: Full Time - To be specified in Job offer Job posting start date: 12/17/2025 Job posting end date: 12/31/2026 Working environment Our high-performing employees are drawn by the challenging and rewarding professional, technical and industrial opportunities we offer, and are remunerated accordingly. At Aramco, our people work on truly world-scale projects, supported by investment in capital and technology that is second to none. And because, as a global energy company, we are faced with addressing some of the world’s biggest technical, logistical and environmental challenges, we invest heavily in talent development. We have a proud history of educating and training our workforce over many decades. Employees at all levels are encouraged to improve their sector-specific knowledge and competencies through our workforce development programs – one of the largest in the world.

Application close date: Applications will be accepted on an ongoing basis until the requisition is closed. At Blue Origin, we envision millions of people living and working in space for the benefit of Earth. We're working to develop reusable, safe, and low-cost space vehicles and systems within a culture of safety, collaboration, and inclusion. Join our team of problem solvers as we add new chapters to the history of spaceflight! This role is part of the Lunar Permanence business unit, which develops Blue Origin's Blue Moon landers and related products. To further Blue Origin's mission of millions of people living and working in space for the benefit of Earth, we are building sustainable infrastructure for our transport of crew and cargo from Earth to the lunar surface. This role supports the development and operations of MK2 Crew Lander Materials & Processes.. As a Materials & Processes engineer, you will participate in a range of design reviews, sign engineering drawings, develop and qualify materials and processes, and perform verification activities in accordance with our Parts, Materials, and Processes Plan. Your broad experience in materials & processes for metallics (e.g. forging, forming, extrusion, plating, corrosion, coating, brazing, anodization, welding, passivation), and/or non-metallics (e.g. carbon fiber composites, adhesives, coatings, SOFI) will be impactful to the team as we refine processes and engineering designs. This position will directly impact the history of space exploration and will require your dedicated commitment and detailed attention to drive down the cost of safe and repeatable spaceflight We are looking for someone to apply their technical expertise, leadership skills, and dedication to quality to build the road to space. Passion for our mission and vision is required! Responsibilities include but are not limited to: * Reviews and approves drawings for conformance to the New Glenn Parts, Materials, and Process Plan. * Defines and implements test plans, specifications, and other documentation for the development of flight hardware. * Provides technical and design for manufacturability guidance to ensure producibility of new hardware. * Manages program-specific materials and process development & qualification. * Leads life cycle transitions from development into production. * Works with multi-functional teams that are responsible for selecting materials, manufacturing processes, and suppliers to produce aerospace hardware. * Addresses and dispositions nonconformances and implements corrective actions to solve the problem at the root. * Finds opportunities for improvements to quality, cost, and schedule. * Coaches, mentors, and technically assists other engineers. Minimum Qualifications: * Bachelor of Science in Material Science, Mechanical, Manufacturing, Industrial, Chemical, Aerospace Engineering or relevant field from ABET accredited school. * 8+ years' experience with metallic materials and processes used in the aerospace industry. * Experience with aircraft, launch vehicle, spacecraft, or satellite development, production, or operations. * Experience with design for manufacturing and engineering drawing review. * Experience working with external vendors. * Experience with defining, driving, and reporting material characterization activities. * Experience writing and authoring specifications and test plans. * Solid interpersonal and communication skills. * Ability to learn, grow and tackle new challenges in a fast-paced environment. * Excellent attention to detail and task ownership, someone who demonstrates pride in all work and willingness to perform low-level tasks when needed. * Strong organizational skills with the ability to prioritize and handle small and large projects with internal and external customers. * Ability to work cooperatively with multi-skilled teams across large geographic distances. Preferred Qualifications: * Experience with materials performance under extreme thermal environments (i.e. cryogenic and elevated temperatures) and compatibility with a range of fluids typically used in space vehicles. * Experience with a variety of metallic and nonmetallic material manufacturing technologies, particularly those required in the fabrication and performance of vehicle primary structure. * Experience with precision cleaning methods to meet propellant cleanliness requirements. * Experience leading technical projects and meeting critical achievements. * Experience with component definitions. * Experience validating component and assemblies for Parts, Material, and Process requirements Compensation Range for: CO applicants is $110,938.00 - $155,312.85 WA applicants is $121,023.00 - $169,432.20 Other site ranges may differ Culture Statement Don't meet all desired requirements? Studies have shown that some people are less likely to apply to jobs unless they meet every single desired qualification. At Blue Origin, we are dedicated to building an authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every desired qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. Export Control Regulations Applicants for employment at Blue Origin must be a U.S. citizen or national, U.S. permanent resident (i.e. current Green Card holder), or lawfully admitted into the U.S.as a refugee or granted asylum. Background Check * Required for all positions: Blue's Standard Background Check * Required for Certain Job Profiles: Defense Biometric Identification System (DBIDS) background check if at any time the role requires one to be on a military installation * Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. * Required for certain Job Profiles: Ability to obtain and maintain Merchant Mariner Credential, which includes pre-employment and random drug testing as well as DOT physical Benefits * Benefits include: Medical, dental, vision, basic and supplemental life insurance, paid parental leave, short and long-term disability, 401(k) with a company match of up to 5%, and an Education Support Program. * Paid Time Off: Up to four (4) weeks per year based on weekly scheduled hours, and up to 14 company-paid holidays. * Dependent on role type and job level, employees may be eligible for benefits and bonuses based on the company's intent to reward individual contributions and enable them to share in the company's results, or other factors at the company's sole discretion. Bonus amounts and eligibility are not guaranteed and subject to change and cancellation. Please check with your recruiter for more details. Equal Employment Opportunity Blue Origin is proud to be an Equal Opportunity/Affirmative Action Employer and is committed to attracting, retaining, and developing a highly qualified and dedicated work force. Blue Origin hires and promotes people on the basis of their qualifications, performance, and abilities. We support the establishment and maintenance of a workplace that fosters trust, equality, and teamwork. We provide all qualified applicants for employment and employees with equal opportunities for hire, promotion, and other terms and conditions of employment, regardless of their race, color, religion, sex, sexual orientation, gender identity, national origin/ethnicity, age, physical or mental disability, genetic factors, military/veteran status, or any other status or characteristic protected by federal, state, and/or local law. Blue Origin will consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state, and local laws, including the Washington Fair Chance Act, the California Fair Chance Act, the Los Angeles Fair Chance in Hiring Ordinance, and other applicable laws. For more information on "Know Your Rights," please see ___. Affirmative Action and Disability Accommodation Applicants wishing to receive information on Blue Origin's Affirmative Action Plans, or applicants requiring a reasonable accommodation in order to participate in the application and/or interview process, please contact us at___. Please note this is a publicly managed inbox. Please do not include any personal medical information in your request. California Applicant Privacy Notice If you are a California resident, please reference the CA Applicant Privacy Notice ___.

Aramco energizes the world economy. Aramco occupies a special position in the global energy industry. We are one of the world’s largest producers of hydrocarbon energy and chemicals, with among the lowest Upstream carbon intensities of any major producer. With our significant investment in technology and infrastructure, we strive to maximize the value of the energy we produce for the world along with a commitment to enhance Aramco’s value to society. Headquartered in the Kingdom of Saudi Arabia, and with offices around the world, we combine market discipline with a generations’ spanning view of the future, born of our nine decades experience as responsible stewards of the Kingdom’s vast hydrocarbon resources. This responsibility has driven us to deliver significant societal and economic benefits to not just the Kingdom, but also to a vast number of communities, economies, and countries that rely on the vital and reliable energy that we supply. We are one of the most profitable companies in the world, as well as amongst the top five global companies by market capitalization. Experienced Nonmetallic engineering specialist must have advanced knowledge and strong technical background in polymer and composite and their applications in Oil and Gas (O&G) and Building and Construction (B&C) sectors. Candidates must have good communication skills and be comfortable working both independently and with cross-departmental teams. Candidate will be responsible to support nonmetallic deployment, strategy implementation, design review, maintain and develop the company’s NM standards; provide technical support to the company’s operations, new projects development and evaluation. Provide consultation, review capital projects and introduce qualified nonmetallic products in the engineering design packages. Support research and pilot projects that will enhance unit performance. Develop new specifications and update existing standards, procedures and best practices. Perform technical assessment of new vendor facility, their qualification and approval and conduct periodic assessment to maintain regulated vendor list. Develop, introduce and/or implement viable new nonmetallic technologies (eg. oil and gas, building and construction) in Saudi Aramco facilities. Lead or participate in specialized tasks, such as incident investigation (e.g. failure analysis) teams, special audit teams, value engineering teams, organizational improvement teams, etc. Provide support in design and construction of the nonmetallic (e.g. pipe, composite repair, structural component, lining) product system. Act as a professional mentor to developing specialists and engineers. Demonstrate excellent technical writing and presentation skills. Bachelor’s Degree (Advanced Degree preferred) in Chemical, Materials, Polymers, or Mechanical Engineering with 20 years of professional experience as an engineer in the field of nonmetallic materials, specifically in oil and gas industry. Excellent knowledge in nonmetallic (eg. thermoplastic, thermosets) products (e.g. piping, tanks, valves, downhole tubulars, composite structures) qualification and testing, consultation, operation, technical support and technology management. Affiliation with professional societies is highly desirable such as ASME, API, ISO, NACE with In-depth knowledge in International Engineering Standards and Specifications. Work Location: Within Saudi Arabia – To be specified in Job offer Work Schedule: Full Time - To be specified in Job offer Job Posting Start Date: 1/6/2026 Job Posting End Date: 12/31/2026 Working environment Our high-performing employees are drawn by the challenging and rewarding professional, technical and industrial opportunities we offer, and are remunerated accordingly. At Aramco, our people work on truly world-scale projects, supported by investment in capital and technology that is second to none. And because, as a global energy company, we are faced with addressing some of the world’s biggest technical, logistical and environmental challenges, we invest heavily in talent development. We have a proud history of educating and training our workforce over many decades. Employees at all levels are encouraged to improve their sector-specific knowledge and competencies through our workforce development programs – one of the largest in the world.

Aramco energizes the world economy. Aramco occupies a special position in the global energy industry. We are one of the world’s largest producers of hydrocarbon energy and chemicals, with among the lowest Upstream carbon intensities of any major producer. With our significant investment in technology and infrastructure, we strive to maximize the value of the energy we produce for the world along with a commitment to enhance Aramco’s value to society. Headquartered in the Kingdom of Saudi Arabia, and with offices around the world, we combine market discipline with a generations’ spanning view of the future, born of our nine decades experience as responsible stewards of the Kingdom’s vast hydrocarbon resources. This responsibility has driven us to deliver significant societal and economic benefits to not just the Kingdom, but also to a vast number of communities, economies, and countries that rely on the vital and reliable energy that we supply. We are one of the most profitable companies in the world, as well as amongst the top five global companies by market capitalization. Engineering Services are seeking an Electrical Planning Engineer to join the Power & Utilities Facilities Planning Division (P&U FPD) of Facilities Planning. The Facilities Planning is responsible for providing development of Saudi Aramco Capital Program, long term plans that focus on value creation and optimal options for capital projects, as well as front-end planning. Power & Utilities Facilities Planning Division (P&U FPD) is responsible for planning and coordination Electrical power systems and Utilities for all Business Lines. Activities include developing Master Plans, Design Basis Scoping Papers (DBSPs), and conducting techno-economic studies. The Electrical Planning Engineer’s primary role is to develop and support Capital projects from feasibility assessment to commissioning and startup. This includes feasibility development, business case evaluation, master planning, alternative analysis, scope definition, and coordination with internal and external stakeholders to secure project funding, and support execution as needed. The specialist will develop a reliable, efficient, sustainable and low-carbon conventional and renewables power scope. Develop power systems Capital Projects from feasibility assessment to full funding, including studies, scope of work development, design basis scoping papers, economic justification and alternatives assessment, and value improvement. Lead the Integrated Project Team (IPT) during the study and scoping phases of the project. Develop the electrical systems scope for major crude, gas, and refining, and chemical programs. Identify investment opportunities, develop alternatives, and recommend optimal solutions. Conduct techno-economic studies to establish project business case and economic viability. Develop feasible and optimized alternatives for electrical power systems associated with projects. Review execution contractors for capital projects electrical engineering activities and provide guidance to carry out electrical activities such as power system studies, equipment specifications and selection. Perform project specification review during the details engineering phase to ensure economic design and conformance with Design Basis Scoping Papers. Develop executive level briefings, memos, presentations and documents on capital investment and other special study items to present findings to management and stakeholders Mentor junior and intermediate electrical engineers. Bachelor's degree in Electrical engineering, Power or Electrical Machines Engineering. An advanced degree in relevant field from a reputable institution is highly preferred. 20 years of experience in electrical engineering, scope development, design, economic evaluation, commissioning & start-up for major international Energy Companies or Consulting/EPC firms specialized in power generation, T & D systems, oil and gas and petrochemical fields. This includes of at least 3 years in business case evaluation and assessment for various power systems, leadership of major engineering studies and design packages. Participated in projects involving design and commissioning of HV equipment, GIS substations, power transformer systems, generation systems, renewable power systems, plant & utility electrical distribution systems and critical AC/DC systems. Experienced in using power system analysis software ETAP , Thermoflow (or equivalent) thermal engineering software for Cogeneration plants. Experienced in engineering practices, economic principles and sustainability. Knowledge of IEC or U.S. Codes, Standards and Specifications. PE / Professional Certification is an advantage. Ability to integrate engineering, financial and business judgment in decision-making. Strong stakeholder management and cross-functional coordination experience. Excellent communication and technical presentation skills. Work Location: Within Saudi Arabia – To be specified in Job offer Work Schedule: Full Time - To be specified in Job offer Job Posting Start Date: 1/6/2026 Job Posting End Date: 12/31/2026 Working environment Our high-performing employees are drawn by the challenging and rewarding professional, technical and industrial opportunities we offer, and are remunerated accordingly. At Aramco, our people work on truly world-scale projects, supported by investment in capital and technology that is second to none. And because, as a global energy company, we are faced with addressing some of the world’s biggest technical, logistical and environmental challenges, we invest heavily in talent development. We have a proud history of educating and training our workforce over many decades. Employees at all levels are encouraged to improve their sector-specific knowledge and competencies through our workforce development programs – one of the largest in the world.

Job Description Engineer/Maintenance Saturdays & Sundays Do you like making repairs and learning about how things work? Do you want to be a part of a team that creates a safe and enjoyable environment for our guests? We are hiring for a Maintenance Personnel! Could this be you? What We Offer: • Career advancement opportunities, • Employee discounts, • Competitive pay, • Daily Pay, • Flexible work schedule, • Comprehensive benefits for you and your family including (medical, vision, dental, 401k, Profit Sharing) Maintains and performs general repairs of buildings and maintains grounds by performing the following duties QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. ESSENTIAL JOB FUNCTIONS • Handle all equipment repairs – contacting vendors, gathering bids, presenting to Regional Engineer and Regional Director of Operations for approval, • Complete all warranty submittals to corporate maintenance staff, • Complete monthly maintenance inventory, submit supply orders to General Managers, • Conduct room PMs with support of maintenance personnel, • Track room PMs accurately, ensure both hotels complete all rooms every quarter, • Coverage of daily maintenance duties when call off occurs (and/or during vacation days), • Daily review of pool chemical logs and maintain and service pool and spa areas including testing and recording as stated by State and City regulations, • Must have CPO certification, • Point of contact during all Regional Engineer visits, the Chief Engineer should spend the entire visit with Regional Engineer, • Weekly property walks with General Manager, create list of repairs needed and delegate accordingly, • Weekly manager meeting participation, • Monitor Quore, ensure maintenance personnel is accurately using Quore (if applicable), • Actively monitor guest scores and make necessary adjustments to improve maintenance scores, • Track expenses vs monthly budget to ensure they are in line, • Be on-call for any and all after hours emergencies – responding promptly if needed, • Ensure QAs are PASS score for condition scores, • Oversee houseman at both hotels and train new maintenance personnel, • Complete any larger special projects needed by the hotel, • Receives written work orders or verbal instructions from supervisor, • Cleans internal areas of buildings, including sweeping and mopping, • Maintains cleanliness of public areas, storage areas, and parking lot, • Empties trash cans and consolidates trash for weekly pickup, • Repairs parking lot and sidewalks with asphalt, cold patching materials and concrete, • Operates snow removal equipment to maintain parking lots and sidewalks, • Maintains and repairs buildings’ plumbing and electrical systems, including replacing worn or defective parts such as switches and fuses, • Maintains all fixtures and equipment according to preventative maintenance schedule, and records such as maintenance in log book and Property Preservation Calendar, • Replaces worn or damaged parts such as hoses, wiring, and belts, in machines and equipment such as truck , street sweeper, and riding mower, • Assists other departments with moving furniture and unloading and storing supplies, • Keeps accurate records of key control changes, • All other duties as assigned What we are looking for: • 6 months – 1+ year of hotel maintenance experience preferred, • Passionate about hospitality and creating an exceptional guest experience, • Ability to performs Daily Maintenance Engineer Checklist, • Ability to maintain and repair buildings’ plumbing and electrical systems, including replacing worn or defective parts such as switches and fuses, • Ability to Identify and report needed repairs to the parking lot and sidewalks., • All other duties as assigned.

Job DescriptionDescriptionEquinox Engineering is an International EPCM leader known for innovative facility design and engineering across natural gas, oil, heavy oil, carbon capture, power generation, emerging energy, and brownfield Projects around the globe. We work with top energy producers in the USA, Canada, and internationally. We are committed to identifying and retaining the most talented employees to delivering high‑quality projects of all sizes and complexities that exceed client expectations. We are seeking a Junior Process Engineer with 2+ years of experience who is eager to grow their technical skills, contribute to multidisciplinary project teams, and support the design and optimization of energy facilities. This role offers hands‑on learning, exposure to diverse projects, and strong mentorship from experienced engineers. Why Join Equinox? • Meaningful work on a wide range of energy and processing projects, • Strong, people-focused culture emphasizing mentorship, collaboration, and technical growth, • Flexible and supportive work environment with long-term career development opportunities, • Assist in developing process simulations and models under senior guidance, • Support preparation of key engineering deliverables, including:, • Heat & Material Balances, • Process Flow Diagrams (PFDs), • Piping & Instrumentation Diagrams (P&IDs), • Engineering calculations, reports, and data sheets, • Conduct basic analyses of facility performance and help identify opportunities for optimization or debottleneckingCollaboration & Project Execution, • Work closely with multidisciplinary engineering teams, senior engineers, and project managers, • Interface with vendors to gather technical information and support equipment specification, • Support commissioning, start‑up activities, and field engineering tasks when requiredSafety, Quality & Compliance, • Participate in P&ID reviews, hazard assessments, and design verification activities, • Natural gas processing (sweet and sour gas), • Oil processing, including heavy oil, stabilization, and treating operations, • Power Generation, • Brownfield MOC’s, • Bachelor’s degree in Chemical Engineering, • 2+ years of experience in process engineering (EPC/EPCM experience preferred), • Familiarity with process simulation tools (e.g., Aspen HYSYS, ProMax, or similar), • Strong analytical, communication, and teamwork skills, • Ability to work effectively in a fast-paced project environmentReady to Apply?If you're looking to accelerate your process engineering career, contribute to impactful energy projects, and learn from industry-leading engineers, we’d love to hear from you.

Investing in You, join a 100-year-old, family-owned leader in Ag - and grow with us! Wilbur-Ellis invests heavily in our employees by offering skill development and training, competitive compensation and benefits, and a tradition of promoting from within for a broad range of career opportunities. And we foster a supportive, people-first work environment. "We know the confidence gap can get in the way of meeting spectacular candidates, so please don't hesitate to apply - we'd love to hear from you." Role Overview: The Sr. Process Engineer directly impacts how fertilizer, crop protection products, and seed move through the supply chain. This technical role is designed for professionals who have handson experience in bulk systems and are ready to elevate their impact across multiple facilities. You will partner closely with Operations, Sales, and Project teams to modernize, standardize, and optimize bulk storage, conveyance, and blending systems. Your work will directly influence facility performance, safety, and customer service. A Sample of What You'll Do in this Role: * Collaborate across Facilities, Operations, Sales, EHSS, and Business process teams to identify opportunities that increase throughput, reduce manual handling, and improve overall system performance. * Evaluate facility workflows, conduct system assessments, and define engineering recommendations that elevate safety, reliability, and consistency across sites. * Understand, develop, refine, and document system designs including PFDs, P&IDs, equipment layouts, and utility requirements-supporting scalable improvements across multiple locations. * Partner with vendors and internal stakeholders to bring forward new technologies in automation, controls, and conveyance. * Prepare clear, concise technical reports and capital recommendations that support project justification and decisionmaking. * Provide handson field support for project implementation, equipment commissioning, and troubleshooting during startup phases. * Experience with design and/or operations of bulk conveyance and blending systems of dry and liquid products. What You Bring to this Role: * Strong working knowledge of agricultural retail or manufacturing operations, including product storage, handling, conveyance, and blending systems * Ability to translate operational challenges into practical engineering solutions * Experience with pumps, conveyors, motors, electrical systems, controls, and chemical compatibilities, particularly in fertilizer and crop protection environments * Ability to influence outcomes and collaborate across operations and sales teams without direct authority * Proficiency with CAD/Bluebeam and the ability to produce and interpret engineering drawings * Experience applying process improvement principles to realworld facility challenges * Willingness to travel up to 35% * Familiarity with data analytics tools to support decisionmaking is preferred * Bachelor's degree in Agricultural, Mechanical, Chemical, or Industrial Engineering is preferred What Makes You a Great Fit: * You have a proactive mindset with strong analytical, troubleshooting, and problemsolving skills * You enjoy working collaboratively with crossfunctional teams while maintaining high attention to detail * You have strong written and verbal communication skills suited for both technical and nontechnical audiences * You can manage multiple concurrent projects while maintaining strong organizational discipline Compensation & Benefits: * In compliance with all states and cities requiring transparency of pay, the base compensation for this position ranges from $92,400 - $123,220. Note that salary may vary based on location, skills, and experience. * This position is eligible for an annual discretionary bonus and vacation, holidays, health, dental, vision, mental health, and retirement plan participation, including an employer contribution of up to 7% into your 401(k). Follow this link for more information regarding Wilbur-Ellis employee benefits: ___ Please note that salary ranges provided for this role on external job boards are salary estimates made by outside parties and may not be accurate. Our Commitment to Diversity & Inclusion: Diversity of people, cultures, opinions, and ideas makes us all stronger. From leadership commitment to employee buy-in, we know that creating an inclusive environment and providing opportunities for all employees to reach their full potential is a shared responsibility. Wilbur-Ellis is a company you can be proud to call your employer Wilbur-Ellis markets and distributes agricultural products, animal feed specialty chemicals, and food ingredients. A privately held and consistently profitable company, we employ more than 4,000 people throughout North America and Asia-Pacific. Wilbur-Ellis is for and about people Wilbur-Ellis has enjoyed over 100 years of success and growth, all thanks to our people. Our employees are both leaders and team players who thrive on creativity, entrepreneurial spirit, and a dedication to quality work, our customers, and each other. Wilbur-Ellis invests in the industry's best workforce Wilbur-Ellis invests heavily in our employees by offering skill development and training, competitive compensation and benefits, and a tradition of promoting from within for a broad range of career opportunities. And we foster a supportive, people-first work environment. Follow our career social media accounts! Instagram: ___ * TikTok: ___ * Facebook: ___ * LinkedIn: ___

Requisition ID: 180099 Job Level: Mid Level Home District/Group: Kiewit Industrial & Water Engineering Department: Design Engineering Market: Industrial Employment Type: Full Time Position Overview We are adding Mid to senior level Fire Life Safety Engineers to our Industrial Engineering team. Our Fire Life Safety Engineers are often the bridge between process safety, facility engineering and construction execution. They ensure that fire protection systems are not only code compliant but also aligned with operational risk, equipment layout and process hazards. If you are looking for an opportunity to grow your skills in Fire Protection and expand your knowledge to other industries - we want to talk with you. The Fire & Life Safety (FLS) Engineering Department primarily supports Kiewit's power generation, infrastructure, industrial and water work across all of North America. The FLS department is the go-to department within the Kiewit organization for all things fire protection and life safety related. This requires engineers within the FLS department to have a wide range of skills and knowledge ranging from site layout considerations, code and standard analysis, detailed design, to construction administration. These skills are then required to be applied across multiple project types and implementation methods from design-build to Engineering, Procurement, & Construction (EPC). What separates Kiewit's FLS department from other firms is integration with construction. The FLS engineers are involved on projects from estimate through award including creation of bid documents, selection of subcontractors, review of submittals, and project close out. During design and procurement the FLS engineers work with our Kiewit construction personnel to ensure constructability, schedule, and costs. During construction the FLS engineers manage and track the performance of the fire protection subcontractors and serve as the responsible engineer assigned on the project for that contract. Accountability, teamwork, and ownership are key themes in our work. We are one of North America's largest and most respected engineering and construction organizations with a combined staff of more than 3,600 engineers and design professionals with expertise spanning all major engineering disciplines. Backed by over 100 years of construction experience, our construction-driven engineering focuses on constructability and safety in the earliest phases of projects to ensure on-time and on-budget project delivery. District Overview Kiewit Industrial & Water Engineering is a full-service consulting and engineering firm serving the infrastructure and engineering markets. Our combined staff of more than 1,700 engineers and design professionals have expertise that spans all major engineering disciplines to serve transportation, power, water/wastewater, mining, building, and oil, gas & chemical markets. Backed by 130 years of construction experience, our construction-driven engineering focuses on constructability and safety in the earliest phases of projects to ensure on-time and on-budget project delivery. Our rapidly growing Industrial Design Group, which includes process, electrical, controls, structural, architectural, geotechnical, and civil disciplines, is a multi-faceted and leading-edge division of Kiewit with best-in-class technical expertise focused on EPC and design-build delivery of industrial projects in markets such as Data Centers, Mining, Industrial and Municipal Water/Wastewater and Campus Energy. In addition to our Industrial markets, our fire protection group provides direct support for Kiewit's Infrastructure and Power generation engineering and construction teams. In this capacity, engineers can expect to be exposed to various different project types and challenges. Location This position is based out of our either our Lenexa, Kansas or Lone Tree, Colorado office. Some consideration may be made for individuals located near other Kiewit offices in the US. We offer relocation to our district office in Lenexa Kansas. Responsibilities * Provide fire protection and life safety design, analysis, construction support for industrial facilities, which includes fire and smoke modeling, hazards analysis, risk assessments and scenario evaluations, smoke management plans, explosion protection stategies, and fire-area separation concepts. * Perform fire hazard analysis for the site to determine hazards and appropriate active and passive fire protection schemes in conjunction with the requirements of the applicable codes, standards, and contract requirements. * Generate calculations to size water supply, fire pumps, and underground pipe sizing. * Develop subcontractor scope of work packages based upon the fire hazard analysis and calculations. * Award and manage subcontractors based upon the scope of work packages developed. * Review subcontractor fire suppression and fire alarm system plans and calculations. * Review fire barrier and penetration seal requirements for specific hazards. * Perform life safety reviews for buildings and industrial equipment areas. Prepare system documentation, O&M requirements, emergency response procedures. * Travel is required (approximately 10% of the time) to meet with clients and/or job site personnel on an as-needed basis. Qualifications * Bachelor's or Master's degree in Fire Protection Engineering, Mechanical Engineering, Architectural Engineering or related engineering field. EIT preferred. * 3 years minimum relevant experience in Fire protection and life safety design/analysis and construction support for industrial, power or similar type facilities performing functions as outlined above. Individuals with more experience are encouraged to apply and will be evaluated accordingly. * Possess excellent written and verbal communication skills to ensure concepts and requirements are fully conveyed to the various team members and clients in a professional manner. * High level of self-discipline, motivation, ability to operate in a team environment, and willingness to do what it takes to get the job done right the first time. Willingness to travel to project sites to evaluate the job and see the job through construction/turnover. Experience with Data Centers, Water treatment, Power, or Nuclear highly desired * Proficiency with the following NFPA codes and standards: 13, 14, 20, 22, 24, 72, 101. * Proficiency with the International Building Code and International Fire Code. * Familiarity with NFPA 850 and NFPA 2001 preferred. * Ability to navigate local code requirements/amendments, other NFPA standards and criteria such as FM data sheets on an as-needed basis. * Construction administration experience preferred. * Work during normal operating hours to organize and complete work within given deadlines. Overtime is possible as needed. * Work productively and collaboratively to meet deadlines. Other titles: Fire Protection Engineer, Fire Protection Project Manager, Fire Safety Engineer, Fire Protection Systems Engineer, Fire Alarm Engineer, Special Hazards Engineer, Life Safety Engineer, Fire Science Engineer, Nuclear Fire Protection Engineer, Nuclear Fire Safety Engineer, Fire Hazards Analysis Engineer, Fire Risk Engineer - Nuclear, Fire Modeling Engineer #LI-JB1 * Regular, reliable attendance * Work productively and meet deadlines timely * Communicate and interact effectively and professionally with supervisors, employees, and others individually or in a team environment * Perform work safely and effectively. Understand and follow oral and written instructions, including warning signs, equipment use, and other policies. * Work during normal operating hours to organize and complete work within given deadlines. Work overtime and weekends as required. Base Compensation: $95,000 - $129,000 (Actual compensation is subject to variation due to such factors as education, experience, skillset, and/or location) This posting will be active from: 03/20/2026 - 07/27/2026 We offer our fulltime staff employees a comprehensive benefits package that's among the best in our industry, including top-tier medical, dental and vision plans covering eligible employees and dependents, voluntary wellness and employee assistance programs, life insurance, disability, retirement plans with matching, and generous paid time off. Equal Opportunity Employer, including disability and protected veteran status. Company: Kiewit

Job Description Job Title: Senior Cell Quality Engineer Location: Denver, Colorado or San Francisco Bay area, California Department: Cell Engineering Experience Level: Mid-Level (5+ years) Position Type: Full time Position Summary Peak Energy is seeking a Senior Cell Quality Engineer to establish and drive incoming quality inspection targets and standards for battery cells integrated into energy storage systems and raw materials used in cell manufacturing. This role is critical in ensuring that purchased cells meet performance and safety expectations while also setting quality metrics for electrode rolls and other essential cell components used in cell production. The ideal candidate will have deep expertise in cell quality assurance, particularly in cell integration for energy storage systems and cell manufacturing processes. This person will be responsible for defining, implementing, and managing inspection procedures and quality metrics to ensure high-performing and reliable sodium-ion battery systems. Key Responsibilities · Develop and implement incoming quality inspection standards for: o Purchased battery cells for system integration. o Raw materials, including electrode rolls, separators, electrolytes, and casings. · Establish quality targets, acceptance criteria, and inspection methods for purchased cells based on performance, reliability, and safety requirements. · Define and implement testing and inspection procedures for raw materials and components to ensure compliance with industry and internal standards. · Lead failure analysis and root cause investigations for non-conforming materials and cells, working with internal teams to drive corrective actions. · Support material qualification and process validation for manufacturing, particularly for incoming electrode rolls. · Develop and maintain statistical process control (SPC) metrics to monitor quality consistency in cell integration and manufacturing. · Collaborate with manufacturing and R&D teams to set quality benchmarks for new materials and processes. · Drive continuous improvement initiatives in material and cell quality within Peak Energy's manufacturing and integration processes. Qualifications & Experience · Bachelor's or Master's degree in Materials Science, Chemical Engineering, Mechanical Engineering, or a related field. · 5+ years of experience in quality engineering within battery manufacturing or cell integration for energy storage systems. · Strong background in battery cell quality assurance, including incoming cell inspections and material qualification. · Experience with electrode roll quality control, setting incoming material specifications, and ensuring quality consistency in manufacturing. · Deep understanding of battery manufacturing processes, failure modes, and quality control methodologies. · Proficiency in statistical analysis, Six Sigma, and SPC methods for process control and quality improvement. · Familiarity with industry standards and testing protocols for battery performance, safety, and reliability (e.g., UN 38.3, IEC, UL). · Hands-on experience with metrology, inspection tools, and analytical techniques used in battery quality evaluation. · Strong ability to collaborate across engineering and manufacturing teams to drive quality initiatives. Preferred Qualifications · Experience with sodium-ion, lithium-ion, or other advanced battery chemistries. · Knowledge of Jira, Smartsheet, and other quality tracking tools. · Certification in Six Sigma, Lean Manufacturing, or Quality Engineering (CQE) is a plus. The salary range for this role is $150,000 - $170,000, with actual pay varying based on work location, experience, and skills. Our competitive benefits package includes flexible time off, comprehensive medical, dental, and vision coverage, a strong 401(k) plan, and equity opportunities. Join us to thrive in a supportive environment while making a meaningful impact in the energy sector! At Peak Energy Technologies Inc., we believe that a diverse and inclusive workplace makes us a more capable, innovative, and competitive company. We welcome people who represent diversity in their backgrounds, ethnicities, cultures, and experiences. Peak Energy Technologies Inc. is an equal opportunity employer, aiming to reach our company's full potential by cultivating an inclusive workforce. We do not discriminate on the basis of race, color, ancestry, religion, national origin, sexual orientation, citizenship, marital or family status, disability, gender identity or expression, veteran status, or any other legally protected status.

Job Description Position: Fire & Explosion Engineer Reports To: Company Partners Job Type: Full-time / 40 hours per week expected Salary: $90,000 – 120,000 depending on experience Job Location: Golden, Colorado (Hybrid) Overview: We are looking for a qualified candidate to build and lead a nationwide thermal science practice with a focus in fire and explosion investigations. Location preference is Colorado. Join a growing forensic engineering and architecture firm that specializes in investigating and repairing damaged structures and infrastructure. Requirements: • Must have 8+ years of related experience., • Must have CFEI or CFI certification., • Qualified candidates will have a degree in a related field such as chemical engineering, electrical engineering, mechanical engineering, or fire protection engineering., • Master's or PhD preferred., • Relocation assistance possible., • Testimony experience preferred., • Must be able to travel nationally and perform site inspections., • Job based in Denver, CO with national travel. Benefits: • Insurance (Health, Vision, Life, Disability, Dental), • 6% employer 401k matching, • Maternity leave program, • Flexible schedule with work from home opportunity, • Vacation and Sick Pay, • Paid holidays, • Professional license and professional development costs paid by employer, • Colorado office with engineering testing laboratory

Job DescriptionCompany Description We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results – for our people, our clients, and our company. We're a people-centric firm, so it's no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. Job Description Olsson offers its clients a full spectrum of water and wastewater services, including a complete line of planning, design, permitting, and construction phase services. Maintaining water quality is Olsson's number one concern, and we are able to respond to a broad set of client demands in a timely and cost-effective manner. As a Wastewater Treatment Subject Matter Expert, you will be responsible for mentoring, quality, technical excellence, and design reviews. The Subject Matter Expert provides direction on design and development activities across the firm to improve or design new concepts and processes for services within the discipline, focusing on technical performance and production, technical innovation, and quality. Key Responsibilities: • Serves as a subject matter expert for the firm, acting as an advisor internally and externally and elevating the level of technical capabilities related to wastewater treatment., • Provides firmwide direction, internal consultation, and services to clients in a specialized service or discipline integral to the firm., • Ensure all processes and systems comply with local, state, and federal regulations. Prepare and review compliance documentation and reports., • Maintains a reputation as a technical expert outside of the firm; writes papers, gives technical presentations, and/or regularly represents the firm in professional and technical societies., • Promotes efficiencies in producing quality work and ensures quality control standards are maintained., • Researches and analyzes wastewater-related data, trends, and emerging technologies to provide insights and recommendations internally and externally., • Builds and maintains relationships with key stakeholders and industry partners to stay informed of developments and to identify opportunities for collaboration., • May represent the firm on governing bodies of professional organizations to elevate the profession and the firm's brand., • Working collaboratively with others., • Having ownership in the work you do., • Strong communication skills., • Ability to contribute and work well on a team., • Bachelor's degree in Engineering required. Master's degree in Chemical, Civil, Mechanical, or Environmental Engineering preferred., • Must be a licensed professional engineer (PE)., • 12+ years of experience in water/wastewater process engineering., • Strong technical background and experience in wastewater treatment, wastewater modeling, and regulatory compliance., • Experience in leading and mentoring others., • Innovative and proactive approach to problem-solving., • Strong organizational skills and attention to detail., • Commitment to continuous learning and professional development, including participation in professional organizations. #LI-DNI Actual compensation will vary based on factors such as experience, qualifications, geographic location, skills, education, and internal equity. Colorado Pay Range$156,000—$241,000 USDAdditional Information Olsson specializes in engineering and design, client advisory services, planning, field services, and environmental. Improving the world has been our mindset from the very beginning, back when Olsson first opened for business in 1956. And it will be our mindset for years to come. As an Olsson employee, you will: • Receive a competitive 401(k) match, • Be empowered to build your career with tailored development paths, • Have the possibility for flexible work arrangements, • Engage in work that has a positive impact on communities Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here.

Job DescriptionStanley Consultants is an award-winning and industry-leading global consulting engineering firm, with an unmatched commitment to culture, values, and ethics. We are dedicated to client experience and solve the most complex challenges to create a sustainable, connected, and enriched world for all. As the world changes, Stanley strategically evolves with it, integrating the latest technology, innovation, and resiliency practices. With over a century of experience serving the energy, federal government, transportation, and water sectors, we have helped improve lives and shape the infrastructure systems that connect us. As an employee-owned organization with a People First approach, we stand apart from other engineering consulting and services firms. At Stanley, your voice counts, your growth matters, and your success is our success. Stanley Consultants offers flexible work options, competitive pay and great benefits, a strong sense of community, and the chance to build a meaningful, long-term career! Job Title - Senior Water/Wastewater EngineerLocation - Austin, TX \u007C Baton Rouge, LA \u007C Cedar Rapids, IA \u007C Chicago, IL \u007C Denver, CO (Centennial) \u007C Minneapolis, MN \u007C Muscatine, IA \u007C Phoenix, AZ \u007C West Palm Beach, FLJob Type – HybridRequisition ID - 11162 Stanley Consultants is seeking a Senior Water/Wastewater Engineer to lead and deliver water, wastewater, and groundwater projects in any of our Water offices. This individual will be responsible for the planning, design, construction, and project management of water resources and municipal utility infrastructure, including drinking water sources, distribution systems, storage facilities, wastewater systems, and water treatment projects from technical development through construction services.The Senior Water/Wastewater Engineer will have expertise in one or more of the following: • Water distribution, transmission, and storage, • Water/Wastewater treatment, • Wastewater conveyance and peak weather flow infrastructure, • Wastewater treatment, • Water Reuse, • Pump Stations, • Hydraulic modeling, • Asset management, • Risk and resiliency consulting and design, • Smart water system planning, design, and implementationWhat You Will Be Doing:, • Leading team delivery of drinking water projects including evaluation and detailed design of intake structures, surface and ground water treatment plants, water reuse systems, storage, pumping, and transmission and distribution projects., • Preparing master planning reports and documentation required for grants and loans., • Self-motivated subject matter expert; demonstrated through participating in local professional organizations, preparing, and presenting market specific papers and presentations., • Ability to articulate and operate within the One Water paradigm., • Integration of smart water systems, process automation, and machine learning into overall water production and distribution design., • Use AutoCAD, Civil 3D, MicroStation and other applicable engineering design tools., • Work in collaboration with other disciplines (civil, mechanical, electrical, I&C, structural, and CAD) in producing plans and specifications., • Assisting in marketing business opportunities with key clients and development of responses to RFP/RFQs., • Providing marketing, technical leadership, and support during the procurement and execution of projects., • Developing and maintaining long-term relationships with clients., • Assisting clients with permitting, property acquisition, and stakeholder involvement., • Successfully collaborate with multi-disciplinary design teams., • Consistently managing and delivering projects on time and within budget., • Desire and ability to manage and mentor staff.Required Qualifications:, • Bachelor of Science (BS) degree in either Civil Engineering, Mechanical Engineering, Chemical Engineering, or Environmental Engineering., • At least 10 years of relevant experience., • Professional Engineer (PE) license; Illinois PE preferred or must be able to obtain within 6 months of hire date., • Illinois, Indiana, Michigan, and/or Wisconsin network of water/wastewater connections., • Regional expertise in one or more areas of water supply, treatment, storage, and/or distribution technical expertise., • Active participation in professional organizations., • Strong verbal, computer, and organizational skills., • Excellent technical writing skills., • Strong client relationship skills., • Excellent design team leadership skills.Preferred Qualifications: We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description The Dahill Group is pleased to be assisting our client, a major energy industry service provider across North America, in search of an exceptional Project Engineer Gas to join their team. This position is responsible for the safe and successful design, development and execution of natural gas facilities including compression, liquefaction, CNG or LNG storage solutions and pipeline connections/associated laterals to support various power projects across the US. Primary Responsibilities Project Design and Development · Coordinate with power team to provide preliminary engineering and planning estimates/timing for pipeline connections and backup storage solutions (CNG or LNG) on proposed power projects · Coordinate with business development and gas supply teams to plan and execute receipt point facility contracts with pipelines · Develop and present project execution plans (capital budget, timing, sourcing strategies, risk mitigation, etc.) for projects seeking FID Project Execution · Manage permitting, engineering, procurement, construction and commissioning phases of gas pipelines, CNG and LNG storage projects · Validate and approve invoices for project materials and services · Provide regular reports of milestones met, projected cost/schedule, and potential risks and mitigations for assigned projects Project Closeout · Ensure handoff to operations is organized, documented and complete · Organize and facilitate project lookbacks, document successes and learnings Qualifications & Requirements · Bachelor of Science in Chemical, Mechanical, Electrical or Petroleum Engineering · Recent experience managing the planning and execution of scheduled-driven projects of $30MM or more, preferably for oil and gas pipelines/facilities or power plants · Strong experience (10+ years) with pipeline and facility engineering, permitting, construction and commissioning. · Experience with LNG liquefaction or storage and virtual pipelines a plus Indicators & Attributes for Success • Effective and decisive decision-making skills, • Attention to detail, • Cultural awareness, • Business acumen, • Customer/Client focus, • Critical evaluation, • Positive attitude, • Organizational and prioritization skills, • Communication skills, • Accountability, • Ethical practice, • Patience, • Flexibility, • Must be sensitive to corporate needs, employee goodwill, and the business needs Working Conditions/Environment · Operate primarily in a professional and/or business casual office environment. Travel for field visits required as necessary. · Routinely uses standard office equipment such as laptops, photocopiers/scanners, and smartphones. · Evening and weekend work may be required as job duties demand. Salary & Benefits Base Salary: $180,000 - $220,000 - commensurate with experience Target Cash Bonus: 20% LTI – Qualifies for LTI in RSU’s with an anticipated target of 20% Benefits include: 401K Match Flexible PTO Health Insurance/vision/dental/short term-long term disability NOTE: This position will be based and required to work on-site in the Denver office.

Job DescriptionDescription: Is your passion designing complex mechanical systems? Do you enjoy working with clients and team members to solve problems? Our Mechanical Engineers have the opportunity to work on a variety of projects with high-profile clients who are passionate about their facilities and work in a collaborative process to find the right solutions for their unique needs. Swanson Rink’s Senior Mechanical Engineer’s partner with our clients and team members to execute complex projects. This position serves as the technical lead for assigned projects. At Swanson Rink, our Engineers are supported by Project Management and BIM staff allowing them to focus on developing engineering solutions for our clients. Get to Know Us:INTEGRITY | ENGINEERING EXCELLENCE | LEGACY Founded in 1949, Swanson Rink specializes in designing mechanical, electrical, fire protection, plumbing and technology infrastructure for data centers, airports and other complex buildings. Ranked among Building Design + Construction top Engineering Firms for both Airport and Data Center design four years running! Our Impact: Swanson Rink provides endowed scholarships to support engineering students, invests hundreds of hours a year in employee training and development, and we encourage our team to Cultivate Curiosity through a monthly presentation series led by team members on the latest issues and trends facing our clients. Follow us on LinkedIn! What Can We Offer You for All Your Hard Work? • The opportunity to work on complex, exciting projects for high profile clients, • Focused training and professional development, mentorship, professional career growth opportunities, • Paid professional membership fees, tuition reimbursement, prep and exam coverage for certifications and licenses, • EcoPass/Commuter benefits (Denver), • Stock purchase plan, • Company paid holidays, Paid Time Off, paid parental leave, • Vision, dental and medical insurance with employer HSA contributions, FSA options, • Monthly technology allowance, • Traditional and Roth 401(k) with immediate vesting on matching contributions Your Job Responsibilities: • Serve as the technical lead for the mechanical engineering and design of data centers, airport, aerospace and other industrial/commercial projects., • Demonstrate in-depth knowledge and design experience in the following: HVAC systems, including selection of HVAC equipment for building applications, central HVAC plant systems, plumbing and sprinkler fire protection systems, and fire suppression systems such as AFFF, dry chemical., • Demonstrate expert application of local and national building codes and all applicable safety codes and industry standards and International Building Codes, including building, mechanical, plumbing, fire, and fuel gas codes., • Provide mentoring and training to mechanical staff., • Proficiently delegate portions of design work to project engineers, designers, and BIM/CAD staff., • Provide leadership by functioning as a sought-after technical and project-procedures information resource. Requirements: Your Requirements and Qualifications: • A Bachelor's Degree in Mechanical Engineering or Architectural Engineering from an ABET accredited four-year college or university., • Successful performance at this career level typically requires 10 - 15 years of verifiable professional experience in the areas of relevant work experience., • Registration as a Professional Engineer., • Ability and willingness to obtain professional engineering licensure in multiple states., • Extensive experience and proficiency in conducting engineering projects through all phases of development., • Must be available to travel occasionally., • Requires the ability to pass background checks, security screenings or drug testing as required by our clients and/or Federal contracts., • Must be authorized to work in the United States. Salary range of $140,000 - $160,000 and will be based on several factors including experience, knowledge, skills, and abilities of the applicant. Equal Employment Opportunity/Veteran/Disability Note to Staffing Firms: To protect the interests of all parties, Swanson Rink does not accept unsolicited resumes from any source other than directly from an applicant or from an approved vendor with a fully executed written agreement. Swanson Rink is not responsible for any placement fees associated with unsolicited resumes.

Job Description The Fire Protection Engineer performs duties related to advising on, administering or performing research or other professional and scientific work in the investigation or development of fire protection projects. Assignments may include design, construction, inspection, testing, operation, maintenance of firefighting or fire protection apparatus, appliances, devices and systems, or the testing of fire-resistant materials. The position will conduct site visits and update life safety plans and act a subject matter expert, providing assistance, and consultation to facilities leadership. Key Responsibilities: · Develop training materials, and conduct training sessions on fire protection. · Prepare and write reports detailing specific fire prevention and protection issues such as work performed and proposed review schedules. · Provides technical assistance to architects, contractors and other private industry personnel in interpreting and complying with fire codes and standards. Recommends changes in fire codes. · Consult with authorities to discuss safety regulations and to recommend changes as necessary. · Design fire detection equipment, alarm systems, and fire extinguishing devices and systems. · Direct the purchase, modification, installation, maintenance, and operation of fire protection systems. · Inspect buildings or building designs to determine fire protection system requirements and potential problems in areas such as water supplies, exit locations, and construction materials. · Perform standard fire protection design tasks such as sprinkler design criteria specification, preliminary hydraulic calculations, fire pump selection, and fire alarm system layout · Edit HGI standard specifications for assigned projects · Review automatic fire sprinkler and fire alarm contractor shop drawings and provide written comments · Perform field surveys, fire protection system inspections, and acceptance testing · Review A/E drawings for conformance with model and local codes, as well as NFPA standards · Research model and local codes, as well as nationally recognized standards to assist in the development of alternate methods of code compliance · Perform hazardous materials assessments for storage and manufacturing facilities · Develop performance-based design analysis using computer fire modeling, egress calculations, and other available resources · Reviews construction site plans and building plans for compliance with fire protection codes and standards. · Evaluates the fire resistance of building and structures. · Monitor and conduct Fire Hazard Analysis and maintain record for technical evaluation. · Analyze and recommend improvements fire safety plan and prepare plan according to NEP rules, insurance firm and industry code for safety of property and life of humans from fire. · Identify dangerous and risky electrical areas depending on references and recommendations of NEPA and APL. Education, Experience and Skills: · Must be a U.S. citizen · Bachelor’s or Master’s degree in engineering (chemical, fire protection, mechanical, electrical, civil, etc.) from accredited college or university · State certificate of registration as a Professional Engineer (PE) in fire protection engineering required · Minimum five (5) years of relevant engineering experience required · Minimum three (3) years of fire alarm and fire suppression experience required · Hospital life safety code experience preferred · Experience with AutoCad preferred Knowledge & Abilities: · A solid understanding of engineering principles · Strong fire prevention knowledge and skills. · Working knowledge of all healthcare engineering requirements and NFPA · Communicates clearly and concisely, both orally and in writing, and establishes and maintains working relationships with those contacted in the course of work. · Comfortable interacting with all levels of management in multiple areas. · Sharp analytical and problem-solving skills with a high degree of detail · Fire hazard analysis – monitoring and examining potential fire hazards in buildings, water supplies, and construction sites is a key responsibility for fire protection engineers · Research skills – researching and testing fire retardants, ignition sources, and methods of extinguishing flames is another important responsibility · Fire safety equipment design – fire protection engineers help design alarm systems, fire prevention systems, and other detection devices · Technical writing – fire protection engineers document written procedures for other fire safety contractors ‘ Job Type: Full-time

Job DescriptionCompany Description CRB is a leading provider of sustainable engineering, architecture, construction and consulting solutions to the global life sciences and food and beverage industries. Our more than 1,100 employees provide best-in-class solutions that drive success and positive change for our clients, our people and our communities. CRB is a privately held company with a rich history of serving clients throughout the world, consistently striving for the highest standard of technical knowledge, creativity and execution. Job Description As an Automation, Instrumentation and Controls (AIC) Engineer II, you will play a vital role in designing and implementing high-performance automation systems that support manufacturing processes, equipment, critical systems, and facility infrastructure. You will work under the guidance of senior engineers, contributing to all phases of design—from initial programming and concept development to construction documentation and administration. This role involves executing intermediate-level tasks, mentoring junior staff, and coordinating with internal and external stakeholders. You will expand your expertise in control system design, including multi-controller configurations, workstation/server infrastructure, and regulatory compliance. Key Responsibilities • Collaborate with senior engineers to execute design tasks and develop automation system deliverables., • Design automation systems of basic complexity in compliance with codes and standards., • Perform engineering calculations for control elements, instrumentation selection, and sizing., • Develop technical documentation including narratives, reports, drawings, and diagrams., • Utilize platforms such as Microsoft Office, BIM software, and vendor-specific automation tools., • Conduct field investigations to integrate designs with existing systems and infrastructure., • Coordinate with architects, engineers, designers, vendors, and construction trade partners., • Support construction activities including RFIs, submittal reviews, punch lists, and progress reports., • Participate in professional development and industry events., • Mentor entry-level engineers and design staff., • Lead small projects or manage defined scopes of work on larger projects.Qualifications Minimum Qualifications • Bachelor’s degree in Chemical, Mechanical, or Electrical Engineering (ABET-accredited)., • Fundamentals of Engineering (FE) exam registration or completion., • Proficiency in AutoCAD, Revit, and Microsoft Office Suite., • Experience with instrumentation and controls engineering calculations., • Familiarity with control system schematics, panel fabrication drawings, and field wiring plans., • Ability to read and interpret Piping and Instrumentation Diagrams (P&IDs)., • Working knowledge of electrical codes, building codes, and industry standards., • Strong coordination skills across disciplines and with external partners., • Ability to perform design calculations under supervision of a Lead or Senior Engineer. #LI-JV1 Additional Information All your information will be kept confidential according to EEO guidelines. CRB is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. Employment is contingent on background screening. CRB does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of CRB without a prior written search agreement will be considered unsolicited and the property of CRB. Please, no phone calls or emails. CRB offers a complete and competitive benefit package designed to meet individual and family needs. If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Job DescriptionCompany Description CRB is a leading provider of sustainable engineering, architecture, construction and consulting solutions to the global life sciences and food and beverage industries. Our more than 1,100 employees provide best-in-class solutions that drive success and positive change for our clients, our people and our communities. CRB is a privately held company with a rich history of serving clients throughout the world, consistently striving for the highest standard of technical knowledge, creativity and execution. Job Description About the Role Process Utilities Engineers focus on the design of critical utility equipment and distribution (or collection) systems along with the facility infrastructure required to support the manufacturing operations. Typical tasks include the execution of engineering calculations including heat transfer and hydraulic pressure drop calculations. The Entry-Level Process Utilities Engineer is responsible for supporting the documentation of the design scope in coordination with other disciplines. The Entry-Level Process Utilities Engineer may support field installation teams and execute construction site observations. This role is expected to work closely with other architects, engineers and designers, as well as other internal and external team members to ensure a coordinated, constructible and complete design. Core Activities · Supports the documentation of the design scope in coordination with other disciplines. · Supports field installation teams and participates in construction site activities. · Works closely with other architects, engineers and designers, as well as other internal and external team members to ensure a coordinated, constructible and complete design. · Able to work on one or more projects concurrently and manage time effectively. · Solves complex problems under the direction and supervision of a mentor or supervisor Systems designed include: o Purified Water Generation, Storage and Distribution o Clean Steam Generation and Distribution o Compressed Air and Process Gas Generation and Distribution o Biological and Process Waste Collection, Inactivation and Neutralization o Clean in Place Systems o Bulk Chemical Storage and Distribution o Bulk Cryogenic Liquid Storage and Distribution · Produce engineering deliverables including: o Process Flow Diagrams o User Requirements Specifications o Equipment List o Equipment General Arrangements o Equipment Datasheets o Utility Summary o Piping and Instrumentation Diagrams (P&IDs) Qualifications Minimum Qualifications · ABET-accredited Bachelor’s degree in mechanical, chemical or bioprocess engineering · 0 to 3 years of experience, preferably in a design firm setting · Fundamentals of Engineering exam registration or completion · Proficiency in Microsoft Office · Strong verbal and written communication skills Preferred Qualifications · Fundamental experience with performing engineering calculations for fluid mechanics and heat transfer, developing and implementing systems designs · Fundamental experience with chemistry · Fundamental experience with process modeling, material and energy balances and basic sizing calculations · Proficiency in 2D / 3D design platforms (AutoCAD, Revit, Solidworks, etc. Additional Information All your information will be kept confidential according to EEO guidelines. CRB is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. Employment is contingent on background screening. CRB does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of CRB without a prior written search agreement will be considered unsolicited and the property of CRB. Please, no phone calls or emails. CRB offers a complete and competitive benefit package designed to meet individual and family needs. If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Job DescriptionCompany Description CRB is a leading provider of sustainable engineering, architecture, construction and consulting solutions to the global life sciences and food and beverage industries. Our more than 1,100 employees provide best-in-class solutions that drive success and positive change for our clients, our people and our communities. CRB is a privately held company with a rich history of serving clients throughout the world, consistently striving for the highest standard of technical knowledge, creativity and execution. Job Description We are seeking a skilled and experienced Process Engineer III/ IV or V with deep expertise in small molecule manufacturing to join our engineering consulting team. This role combines technical leadership with strategic client engagement, supporting process design, scale-up, optimization, and regulatory compliance across a variety of pharmaceutical and chemical industry projects. The Process Engineer III will lead the design and execution of process scopes—such as unit operations, systems, or facility areas—on small to medium-sized projects. You will manage scope, budget, and schedule, while maintaining clear communication with clients and internal teams. This role also includes mentoring junior staff, contributing to high-quality deliverables, and supporting capital project planning and regulatory alignment. This position can be based near any CRB location Key Responsibilities • Lead and support client projects focused on small molecule API process development, scale-up, and manufacturing optimization., • Conduct site assessments, gap analyses, and provide recommendations for process improvements and compliance., • Develop process flow diagrams (PFDs), piping and instrumentation diagrams (P&IDs), and mass/energy balances., • Translate client requirements into actionable design scope and document decisions, open issues, and action items., • Identify and escalate scope changes or design deviations to project leadership., • Collaborate with cross-functional teams including architecture, mechanical, electrical, and construction., • Prepare technical reports, proposals, and presentations for internal and client stakeholders., • Support capital project planning including feasibility studies, equipment selection, and facility design., • Ensure alignment with industry standards including cGMP, FDA, EMA, and ICH guidelines., • Participate in advanced project activities such as:, • Technical bid tabulations, • Vendor package management, • Factory acceptance testing, • Risk assessments (e.g., HAZOP, HACCP), • 3D model reviews and coordination, • Sequence of operations and functional specification reviews, • Mentor junior engineers and design staff., • Lead system design programming and planning with support from senior engineers., • Participate in cross-discipline squad checks and drive overall project quality.Qualifications Minimum Qualifications • Bachelor’s or Master’s degree in Chemical Engineering or a related discipline (ABET-accredited)., • Minimum of 5 years of experience in small molecule process engineering, preferably in a consulting or client-facing role., • Strong understanding of chemical synthesis, purification, and formulation processes., • Experience in design firm or operating company settings within a related industry., • Strong written and verbal communication skills., • Intermediate experience with applicable industry and regulatory guidance and building codes., • Advanced technical knowledge and experience with small molecule API manufacturing equipment and utility systems, such as chemical reactors, filters, centrifuges, dryers, vacuum pumps, scrubbers, purified water, process compressed gases, and engineered heat transfer fluid systems., • Experience designing and implementing engineering controls for containment of highly potent APIs., • EIT or PE certification., • Experience coordinating and managing design within project teams and with external partners., • Familiarity with commissioning, startup, qualification, and troubleshooting of process systems., • Experience with regulatory environments and validation documentation., • Prior experience in engineering consulting or client services., • Familiarity with process safety, risk assessments, and HAZOP studies. Additional Information All your information will be kept confidential according to EEO guidelines. CRB is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. Employment is contingent on background screening. CRB does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of CRB without a prior written search agreement will be considered unsolicited and the property of CRB. Please, no phone calls or emails. CRB offers a complete and competitive benefit package designed to meet individual and family needs. If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Job Description Crusoe is on a mission to accelerate the abundance of energy and intelligence. As the only vertically integrated AI infrastructure company built from the ground up, we own and operate each layer of the stack — from electrons to tokens — to power the world's most ambitious AI workloads. When you join Crusoe, you join a team that is building the future, faster. We're in the midst of the greatest industrial revolution of our time. The demand for AI compute is boundless, and power is a bottleneck. We're solving that — with an energy-first approach that makes AI infrastructure better for the world and faster for the people innovating with AI. We're looking for problem-solving, opportunity-finding teammates with a sense of urgency, who believe in the scale of our ambition and thrive on a path not fully paved — people who want to grow their careers alongside a team of experts across energy, manufacturing, data center construction, and cloud services. If you want to do the most meaningful work of your career, help our customers and partners advance their AI strategies, and be part of a high-performing team that believes in each other, come build with us at Crusoe. About the Role: Crusoe is seeking a well-rounded and experienced Sr. Manager, Air Compliance - Data and Systems to join our expanding Environmental team in our Denver office. This new role will be a critical partner to our Operations and Manufacturing teams, ensuring that all air quality compliance obligations are identified, obtained, and authorized in accordance with local, state, and federal regulations. The ideal candidate will have a deep technical understanding of environmental air regulations and will be a proactive, solutions-focused team member who can communicate effectively across all levels of the organization. This is a full-time position. What You’ll Be Working On: * Air Quality Subject Matter Expertise: Act as a Subject Matter Expert for Crusoe operations, with a focus on regulations related to emissions from engines, and other combustion sources. You will maintain awareness of new air quality requirements and manage them accordingly. * Emissions, Testing & Reporting: Develop and implement processes to track and report on emissions from our operations, ensuring that all required permits (Title V, PSD, minor. etc.), reports, and data are accurate and submitted to regulatory agencies (e.g., state environmental agencies, EPA). Verify accuracy of emission calculations and estimates for routine emissions as well as maintenance, startup, and shutdown emissions. Oversee stack testing programs, including managing contractor performance, reviewing test plans, ensuring compliance with regulatory methods, and performing Quality Control (QC) on all resulting stack test data * Environmental System Selection & Integration: Lead the development and implementation of a robust, enterprise-wide Env Management System (EMS) and training for new departmental systems and associated modules and functionalities. * Env Data and KPI Development: Support Env team needs with data collection, tracking, uploads, exports, dashboards, and metrics report design. * Internal & External Collaboration: Work with internal teams to ensure key stakeholders are aware of compliance, inspection, and reporting requirements related to air quality. You will also liaise with various regulatory agencies to facilitate compliance. * Audits and Investigations: Plan and assist with compliance audits and self-assessments. You will also facilitate air quality incident investigations and root cause analysis following any non-compliance events. * Training & Awareness: Coordinate and actively participate in the air quality training of personnel and ensure that all relevant documentation is maintained and available at the worksites. What You’ll Bring to the Team: * Education & Experience: A university degree in Engineering or related science degree (Chemical, Mechanical, or Environmental) or at least 15 years of relevant experience is required. A minimum of 10+ years of relevant experience is also a must. * Air Quality Expertise: Must have direct experience with air quality environmental programs, with a primary focus on Title V compliance and emissions reporting, stack testing, opacity, ozone depleting substances, tanks and environmental management systems. * Regulatory Knowledge: Deep technical knowledge of federal and state air quality rules and regulations (e.g., Clean Air Act, Title V, NSPS, NESHAP). * Communication Skills: Excellent communication skills, both written and verbal, for effective interaction across all levels of the organization and with external agencies. * Teamwork & Problem-Solving: The ability to work proactively and collaboratively as a solutions-focused team member. Bonus Points: * Professional Certifications: A professional certification, such as a Professional Engineer (PE) license or a Certified Environmental Professional (CEP) with an air specialty. * Power Generation Experience: Direct experience with environmental compliance in power generation, manufacturing, or oil and gas operations. * Continuous Emission Monitoring Systems (CEMs): Direct experience managing environmental compliance with CEMs and COMs. * Geographical Experience: Prior experience working with environmental regulations in the ERCOT, Texas, Rockies, or Gulf Coast regions. Benefits: * Industry competitive pay * Restricted Stock Units in a fast growing, well-funded technology company * Health insurance package options that include HDHP and PPO, vision, and dental for you and your dependents * Employer contributions to HSA accounts * Paid Parental Leave * Paid life insurance, short-term and long-term disability * Teladoc * 401(k) with a 100% match up to 4% of salary * Generous paid time off and holiday schedule * Cell phone reimbursement * Tuition reimbursement * Subscription to the Calm app * MetLife Legal * Company paid commuter benefit; $300 per month Compensation: Compensation will be paid in the range of $165,000-$180,000 + Bonus. Restricted Stock Units are included in all offers. Salary will be determined by the applicant’s education, experience, knowledge, skills, and abilities, as well as internal equity and alignment with market data. Crusoe is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.

Job Description Multidisciplinary design firm is seeking a Wastewater Treatment Engineer to join their Denver team as a subject matter expert! Responsibilities: • Advise internal/external teams on all wastewater treatment issues, • As the subject matter expert on wastewater treatment, provide firm-wide direction, internal consultation, and services to clients, • Ensure all processes/systems comply with local, state, and federal regulations, • Prepare/review compliance documentation and reports, • Maintain reputation as technical expert by writing papers, giving technical presentations, and/or regularly represent the firm in professional/technical societies, • Produce quality work and ensure QC standards are maintained, • Research/analyze wastewater-related data, trends, and emerging technologies, • Build/maintain client relationships, • Represent firm at professional organizations, • Lead/manage water/wastewater treatment projects from design through implementation, • Prepare detailed project plans, budgets, and schedules, • Mentor/train junior staff Requirements: • Bachelor’s degree in engineering, • Master’s degree in chemical, civil, mechanical, or environmental engineering preferred, • 10+ years of water/wastewater processing engineering experience, • PE License, • Strong technical background/experience in wastewater treatment, wastewater modeling, and regulatory compliance Salary is commensurate with experience. Successful applicants must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! 517-906-6926

Job Description BUILDING ENGINEER II Working Shift Sunday through Thursday or Tuesday through Sat 3:00 pm to 11:00 pm. JOB SUMMARY: The Building Engineer II apply trade skills to perform preventive maintenance and corrective repair of building systems for the safe, efficient and proper operation of the assigned property. The individual in this role must be capable of completing all tasks as directed by the Chief Engineer, Assistant Chief Engineer or property management staff with some supervision, taking ownership when assigned team projects and accepting responsibility for actions and results. DUTIES AND RESPONSIBILITIES: • Complies with all applicable codes, regulations and governmental agency and Company directives related to building operations and work safety., • Works in a constant state of alertness and safe manner., • Competent in all shift operations, satisfying work orders and/or providing some technical and procedural assistance for coworkers., • Electrical: Possesses a working knowledge of electrical systems, circuits and electrical safety procedures. Knowledgeable in troubleshooting, short circuits, grounding issues, etc. of single- or three-phase AC circuits. Competent in the replacement of outlets, switches, lighting ballasts, circuit breakers, motor control starters, motors, etc. Assists with the preventive maintenance program for all electrical equipment., • HVAC: Possesses a working knowledge of heating, ventilating and air conditioning (HVAC) systems and Central Plant operations to include troubleshooting of same. Assists with preventive maintenance for all building mechanical equipment such as air handlers, pumps, variable air volume units, etc. Knowledgeable in building automation systems (BAS). Responds to HVAC calls. Knowledgeable in chemical treatment. Performs inspections on chillers; adjusts and records findings. Replaces belts, motors, bearings, actuators and valves on all mechanical equipment. Knowledgeable in pneumatic or direct digital control (DDC) controllers and actuators for proper operation., • Life Safety: Proficient in the property’s life safety systems and all life safety recordkeeping. Identifies and responds to fire alarms and trouble calls; properly enables or disables points. Conducts inspections of emergency generator and fire pumps; records results. Makes recommendations for outside service as appropriate., • Miscellaneous: Maintains a basic understanding of mechanical drawings and wiring diagrams., • Repairs or replaces door closures, hardware and operators. Adjusts or repairs security systems., • Maintains adequate supplies and tools and orders materials necessary to complete all tasks., • Arranges for subcontractors when required., • Updates job knowledge at an appropriate level by participating in educational opportunities, reading professional publications, growing personal networks and possibly participating in professional organizations., • Performs and/or oversees the day-to-day efficient operation, maintenance and repair of all building and site systems for assigned properties. Building systems include but are not limited to HVAC, electrical, lighting, plumbing, energy management, water treatment, hardware, keying and fire protection., • Assist in the monitoring of contractors, inspecting work and generating deficiency lists., • Accurately complete tenant requests, repair work and related records for the respective site/buildings as required. Follow applicable government / local authority requirements and other records for assigned properties., • Available for various shifts, to fill in for other staff, and to work extended hours, nights, weekends and holidays to ensure adequate building coverage and perform necessary repairs as needed. Respond to afterhours emergencies such as fire, flooding, severe weather (including but not limited to snow and ice removal) power outage and other related situations including clean-up activities per on-call procedures or as requested in critical situations., • Assist in the monitoring and implementation of OSHA requirements., • Perform other duties as assigned. DESIRED SKILLS AND EXPERIENCE: • Solid ability to safely and properly use the following tools: ladders, lifts, basic hand tools, multimeters, amp probes, anemometers (airflow meter and hood), pressure gauges, drain augers, plungers, safety goggles, ear protection and fire extinguishers., • Knowledge of the operation of heavy equipment such as chillers, generators, switchgears, pumps, air handling units, etc., • Effective interpersonal and customer service skills to work with customers, co-workers and outside vendors., • Effective time management and personal organization skills; works with a sense of urgency; able to meet deadlines., • Solid understanding of computer technology including email systems, mobile smart phones, memos and spreadsheets., • Professional, effective written and verbal communication skills. Requires the ability to read, write and speak English to interact with co-workers and tenants, give and receive direction and complete tasks and work orders., • Ability to comprehend, analyze and interpret documents. Capable of defining problems, collecting information, establishing facts and drawing conclusions at a level appropriate for the position., • Ability to add, subtract, multiply and divide common units of measure and apply these concepts to practical situations. QUALIFICATIONS: • Valid driver’s license and clean driving record required, • High school diploma or equivalent, • Minimum 3 years’ experience in the building operation/maintenance field preferred, • Universal EPA Refrigerant Handler License required, • NATE Certified HVAC Technician, • Refrigeration Operating Engineer or Stationary Engineer License required

Job Description Unit8, founded in 2017, is a high-tech, dynamic Swiss leader in AI and data analytics consulting, renowned for solving complex challenges in traditional industries such as automotive, chemical, financial services, manufacturing, and pharma. Our esteemed partnerships with industry giants like Palantir, NVIDIA, and OpenAI underscore our commitment to excellence. With over 200 successful projects and a team of 150+ talented professionals across Switzerland, Poland, and Germany, we are now expanding our footprint to the USA. Unit8 is dedicated to driving AI adoption in non-digital industries, accelerating their digital transformation. We invest in projects that matter, including pro-bono initiatives and "engineering for good" causes. Requirements About You Following our remarkable growth in Switzerland, Poland, and Germany, Unit8 is expanding into the US market. We are seeking a Senior Forward Deployed Engineer who will work directly with customers, owning delivery strategy and implementation. You will act as a thought leader and strategic force in a technical domain that is critical for Unit8 and its clients. You will collaborate closely with Unit8 CTO, our clients, and the Business Development organization to be on the forefront of extending Unit8’s strategy into the US market. What You'll do As a core member of our agile project teams, you will be responsible for designing, building, and maintaining robust data solutions and infrastructure. You will work on cutting-edge data and AI topics to solve real-world business problems for our clients. Your responsibilities will include: • Developing, deploying, and troubleshooting complex data pipelines and processing systems using a variety of open-source and closed-source technologies, with a strong focus on Foundry., • Driving optimization, testing, and tooling to ensure exceptional data quality., • Collaborating with other software engineers, ML experts, and stakeholders in a cross-functional agile environment., • Working in multi-functional agile teams to continuously experiment, iterate and deliver on new product objectives. What You Bring The Experience • Deep Domain Expertise: Minimum 5 years of experience in software/data engineering or data science. You have deep expertise in at least one key domain (Data Engineering, Data Science, Cloud Engineering, or GenAI)., • Commercial Fluency: proven experience in pre-sales, proposal design, or technical advisory where you influenced executive decision-making., • GenAI/LLM Context: For relevant tracks, you have past experience building solutions with LLMs and a deep understanding of the overall GenAI landscape (Evaluation, Training, Problem Decomposition). The Mindset • You have an engineering mindset focused on delivering working solutions. You prioritize solving real business problems over theoretical perfection or academic benchmarks., • You are comfortable working in a dynamic environment with evolving objectives. You can collaborate efficiently with both technical engineers and non-technical business stakeholders., • You feel a sense of ownership over the company’s technical reputation and are eager to train those coming up behind you. The Essentials • Experience with programming/scripting, such as Python and/or SQL., • Proficiency in Palantir Foundry (nice-to-have), • Strong foundation in Computer Science, Mathematics, Physics, or related engineering fields., • Willingness to travel (min. 10%) to client sites to drive implementation success and build relationships. What we offer? • High-Stakes Work: You will work on critical projects that transform how major industries operate., • A "Builder" Culture: We are not a slide-deck consultancy. We build things that work. You will be surrounded by engineers and data scientists who share your passion for execution., • Pioneering role and autonomy: As a key member of our US growth, you will have the freedom to shape how we deliver value in this new market., • Groundbreaking Opportunity: You will play a pivotal role in establishing Unit8's footprint in the USA, driving the growth and impact of our operations in this emerging market., • Rewarding Package: The estimated base salary range for this position is $120,000 – $150,000. In addition to base pay, total compensation includes an annual bonus based on individual and company performance. We also offer a 401(k) retirement plan and comprehensive health insurance. Final compensation will be determined based on the candidate’s qualifications, experience, and skills. Unit8 is committed to creating a diverse and inclusive workplace where all individuals are valued and respected. We believe that diversity drives innovation and enhances our ability to serve our clients effectively. As an equal opportunity employer, we welcome applications from all qualified individuals regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other legally protected status. We are dedicated to fostering an environment where everyone can thrive and contribute to our mission. We look forward to hearing from you!

43489BR Requisition ID: 43489BR Business Unit: TSU Job Description: CDM Smith is seeking an experienced Engineer or Technical Construction Expert to serve as the Remedial Action Discipline Leader. This national leadership role is responsible for advancing remedial action strategies, ensuring the effective application of technology, fostering technical growth, supporting staff development, and enhancing CDM Smith's market distinction to drive sales growth and client retention. Key Responsibilities * Project Leadership: Oversee the design, implementation, and management of proven remedial actions for soil, groundwater, sediments, and surface water at complex industrial, commercial, and Superfund sites. Apply both conventional and innovative technologies to achieve optimal remediation outcomes. * Technical Excellence: Develop and refine conceptual site models (CSMs), evaluate remedial alternatives, and ensure the effective application of treatment technologies (e.g., contaminant capture or destruction, removal and stabilization/solidification for solids and in situ/ex situ water treatment systems). * Design Engineering Framework: Apply and champion CDM Smith's design engineering framework throughout all phases of remedial action projects, ensuring consistency, quality, and compliance with internal standards. Design experience is required. * Design-Build Experience: Lead or support the design-build of remediation systems, from concept through construction and commissioning, with a preference for candidates who have successfully implemented such projects. * Intellectual Property Management: Oversee the development, management, and curation of engineering design drawings, specifications, and templates as part of the discipline's intellectual property. Ensure these resources are maintained in the Technical Knowledge Portal (TKP) and accessible to project teams. * Business Development: Collaborate with sales and marketing teams to identify growth opportunities, support proposal development, and contribute to marketing materials such as fact sheets and project descriptions. Proactively position CDM Smith for new and existing client projects. * Mentoring and Staff Development: Mentor junior and mid-level staff, facilitate knowledge transfer, and support professional growth through the Technical Specialist Development Program. Encourage staff participation in conferences and publications. * Compliance and Best Practices: Ensure all project work adheres to firm policies, regulatory requirements (CERCLA, RCRA, state regulations), and industry best practices. * Thought Leadership: Present technical findings at conferences, client webinars, and internal discipline calls. Contribute to publications and R&D initiatives that advance the remedial action discipline. Job Title: Remedial Action Discipline Leader Group: ESO Employment Type: Regular Minimum Qualifications: Bachelor's degree in Civil, Environmental or Chemical Engineering or related discipline. Professional engineering (PE) license. 12 years of related experience. Domestic and/or international travel may be required. The frequency of travel is contingent on specific duties, responsibilities, and the essential functions of the position, which may vary depending on workload and project demands. Equivalent additional directly related experience will be considered in lieu of a degree. Preferred Qualifications: * Advanced degree (MS or PhD) in a relevant discipline. * Experience with advanced data analytics, modeling, and visualization tools. * Recognized industry thought leader with a strong history of conference presentations and publications. * Proven track record in mentoring and team leadership. * Demonstrated expertise in remedial technologies, regulatory frameworks, and project management. * Experience with the design-build of remediation systems preferred. * Experience managing engineering design drawings, specifications, and templates, and other intellectual property. EEO Statement: We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law. Why CDM Smith?: Check out this video and find out why our team loves to work here! () Join Us! CDM Smith - where amazing career journeys unfold. Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it's a priority that the company takes good care of you and your family. Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world. Job Site Location: United States - Nationwide Agency Disclaimer: All vendors must have a signed CDM Smith Placement Agreement from the CDM Smith Recruitment Center Manager to receive payment for your placement. Verbal or written commitments from any other member of the CDM Smith staff will not be considered binding terms. All unsolicited resumes sent to CDM Smith and any resume submitted to any employee outside of CDM Smith Recruiting Center Team (RCT) will be considered property of CDM Smith. CDM Smith will not be held liable to pay a placement fee. Amount of Travel Required: 20% Assignment Category: Fulltime-Regular Visa Sponsorship Available: No - We will not support sponsorship, i.e. H-1B or TN Visas for this position Skills and Abilities: * Support ongoing R&D, pilot studies, and implementation of innovative remedial technologies. * Maintain updates on promising technologies through technology transfer and their application to remedial designs. * Maintain and grow CDM Smith's reputation for technical excellence and client service. * Collaborate with multi-disciplinary teams to deliver successful project outcomes. * Drive business development and strategic growth for the remedial action discipline. Background Check and Drug Testing Information: CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing. Pay Range Minimum: $120,973 Pay Range Maximum: $211,723 Additional Compensation: All bonuses at CDM Smith are discretionary and may or may not apply to this position. Work Location Options: Hybrid Work Options may be considered for successful candidate. Driver's License Requirements: An appropriate and valid driver's license is required. Massachusetts Applicants: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job DescriptionJob Posting TitleSenior Project Manager - Engineering, Procurement, ConstructionJob Description Job Title: SENIOR PROJECT MANAGER - Engineering Procurement, Construction Location: Central Oregon or Denver, CO Company Overview ENERGYneering Solutions (ESI), a TransTech Energy Company, provides exceptional technical expertise in engineering and operations for both the renewable and traditional energy industries. Since 2007, ESI has specialized in the design, construction, and operations of biogas projects, collectively producing over one million MWh of renewable electricity and more than 50 million gallons of renewable vehicle fuel annually. Headquartered in scenic Central Oregon, at the foot of the Cascade Mountain Range, ESI embraces the region's quality of life and encourages a healthy, active lifestyle for its employees, aligning with its core principle of unmatched experience, flexibility, and follow-through for its clients. Job Overview The Senior Project Manager will provide outstanding project oversight and leadership, supporting the company’s consulting, EPC, and O&M projects. A successful candidate will foster a culture based on safety, quality, on-budget, and on-time completion of work. The position requires implementing sound management and engineering principles to ensure project teams are successful in executing their projects. The ability to collaborate across a multitude of professional disciplines, project types, operating assets, and clients is of the utmost importance to this position. A successful Project Manager will have the communication skills and breadth of experience to provide project direction in the face of uncertainty and will continuously solicit feedback from cross functional team members on ways that project execution plans can be optimized. Reports To The Senior Project Manager will report to the Executive Vice President, working collaboratively to deliver top notch technical services to both the renewable and traditional energy markets. This position is eligible for remote work with a preference given to individual within driving distance to Central Oregon or the greater Denver area. Responsibilities and Duties • Take responsibility for the quality, safety, budget, and schedule of assigned projects., • Develop and maintain project execution plans to include, among other things, schedules, budgets, key stakeholder lists, divisions of responsibility, and communication rosters., • Provide mentorship, training, and continuous feedback to Project Management team members., • Collaborate with other members of the Project and Engineering teams to ensure compliance with contractual requirements and technical specifications., • Provide regular project status updates and action plans to ESI and customer leadership., • Coordinate with Engineering Leads to prioritize deliverables and allocate resources accordingly., • Maintain relations with strategic vendors and sub-contractors., • Collaborate with Business Development and Legal to negotiate contracts and master service agreements with clients and contractors., • Lead change order negotiations with customers, vendors, and subcontractors., • Maintain client relationships before, during, and after close-out of projects., • Facilitate communication within the project management, asset management, and engineering teams to share lessons learned and foster an environment that rewards open discussion about mistakes and near-misses., • Facilitate project close-out meetings to review performance of project team against KPIs., • Participate in risk reviews (PHA, LOPA, HAZOP) of projects activities., • Support plant commissioning activities., • Seek ways to improve and promote quality, demonstrating accuracy and thoroughness in all work., • Communicate and collaborate with cross-functional partners such as Operations, Business, • Development, Project Management, HR, and IT., • Apply RACI principals to support an accountability framework for special projects., • Willingness and ability to respond to urgent issues outside normal business hours., • Willingness and ability to travel up to 25%., • This is a senior level position requiring 8+ years of project management-related experience in some of or all the following industries: Renewable Energy; Oil & Gas; Chemical; Power; Mining; Manufacturing., • Bachelor’s degree in engineering, construction management or equivalent work experience., • Proficiency in project management/scheduling software., • Proficient with the Microsoft Office suite of software. (Word, Excel, PowerPoint, etc.), • Excellent verbal and written communication skills., • Ability to deal with complex problems and present recommendations and findings in a clear, concise format; ability to interact effectively at all levels within and outside of ESI., • Ability to communicate effectively with team members, vendors, and clients., • Quick learner who adapts well to a fast-moving environment., • Highly motivated and willing to take on multiple responsibilities at once; strong organizational skills with the ability to multitask in an environment with changing priorities., • 5+ years’ experience as a Project Manager leading Engineer-Procure-Construct (EPC) projects valued at $10MM to $50MM., • Project Management Professional (PMP) Certification or progress towards one., • Free HSA health plan or traditional PPO, • 401(k) with generous company match (Safe Harbor), • Dental, vision, and optional coverage like accident & critical illness insurance, • HSA and FSA accounts to save on healthcare costs, • Company-paid Life, Long Term Disability, and AD&D insurance, • Confidential support for mental health, family matters, legal concerns, and more through our Employee Assistance Program, • Discounts on gyms, shopping & entertainment, • Unlimited Paid Time Off, • Paid Holidays ESI is located in beautiful Central Oregon, at the foot of the Cascade Mountain Range and the edge of the Deschutes National Forest, surrounded by world-class skiing, biking, hunting, fishing, hiking, climbing, and just about any other outdoor activity you can imagine. ESI elected to build its headquarters in Central Oregon because of the quality of life the region provides. The company takes pride in encouraging a healthy and active lifestyle for its employees. ESI’s core values include pride of ownership, a limitless desire to learn, and a relentless approach to solving any challenge. A successful ESI employee not only embraces these values but knows when to lean on the team for support and guidance. We acknowledge that our fast-paced and dynamic environment is not for everyone, but if you are looking for independence and new challenges, ESI will be a great fit. This organization provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. #ESI

Why join us? + Hybrid flexibility for better work-life balance + Competitive base salary $120,000–$150,000 annually + Comprehensive Medical, Dental, and Vision coverage (with employer contributions) + 401(k) with company match + Paid Time Off and Paid Holidays + Employee Assistance Program + Tuiti

Shift: Monday-Friday 5:00 AM-Finish Potential to earn over $1250.Compensation: $1000 - $1250 paid weekly DENVER CO Monday-Friday 5:00 AM-Finish Potential to earn over $1250.People want to work at Capstone because of our high-performance culture.We build strong relationships, challenge the status quo

Salary: $105,000 - $145,000 per year A bit about us: Based in the Denver area, we are a growing, but established engineering firm that is on the lookout for a talented Structural PM / Structural Design Project Manager! Why join us? As a Structural Design Engineering Project Manager / Structural Desi

Job Description Job Description Overview At SWI Excavating LLC, we are dedicated to transforming communities through safe and high-quality excavation services.Our goal is to complete over 1,000 projects by 2034, enhancing lives with better infrastructure.We are results-oriented, consistently focus

Coordinate with internal and external stakeholders, including engineers, contractors, vendors, and customers, to ensure that project requirements are met. Qualifications: Bachelor's degree in Engineering, Construction Management or related field.

Safeway - JobID: 685479 [Field Technician / Maintenance Mechanic] As a Maintenance Technician at Safeway, you'll: Ensure operation of electrical, mechanical, hydraulic & pneumatic equipment by completing preventative maintenance requirements.

Job Details Mechanical Design Engineer EIT/PE (Hybrid) We are seeking a Mechanical Design Engineer with 3-5+ years of experience in the HVAC Systems Design. Qualifications Bachelor of Science in Mechanical Engineering (or higher) 3–5 years of experience in the MEP industry EIT certification requir

Avenue5 Residential - - Responsibilities: Address an array of apartment and property maintenance duties as specified by the maintenance supervisor and/or property manager; Perform repairs to electrical, plumbing, appliances, flooring, carpentry, HVAC, grounds maintenance; Perform general carpentry

Bimbo Bakeries - - Responsibilities: Load and unload trailers, verify route loads, trailer reports, and maintain the shipping yard; Count and check products for accuracy and quality, maintain accurate records, report overages and shortages, and participate in cycle counts; Operate material handling

This Jobot Job is hosted by: Tiffany D'Angelo Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.Salary: $90,000 - $110,000 per year A bit about us: We are a collaborative, design-driven firm specializing in high-quality architectural and interior solutions a

Aerotek - - Responsibilities: Repair and maintain material-handling equipment, pneumatic systems, and automated conveyor systems across the facility; Install, maintain, troubleshoot, and repair automated packaging and distribution equipment; Perform mechanical, electrical, and controls-based repair

Bachelor's degree in Engineering, Business, or related field is preferred.

Marmon - - Responsibilities: Operate forklifts, remote control overhead cranes, and other equipment to handle metal pipe, tube, and bar products; Pick, pack, and stage materials for shipment with accuracy; Measure and cut pipe and tubing using automated band saws; Keep Things Safe Follow OSHA safe

Coordinate engineering, programming, execution, commissioning, and system integration activities. Analytical and problem-solving skills, including ability to troubleshoot technical issues with support from engineering/programming teams. Bachelor’s degree in Engineering, Construction Management, Co

Hyatt Hotels - - Responsibilities: Perform general maintenance and repairs throughout the hotel; Troubleshoot issues to determine necessary repairs; Perform routine maintenance and preventative maintenance programs; Assist with housekeeping duties as needed; Maintain the building exterior and respo

Responsibilities: Move between departments (Receiving, Picking, Packing, Shipping, and Returns) based on operational needs; Safely load, unload, and move furniture orders and inventory; Use scanners, handheld devices, and warehouse software to track inventory and orders; Perform quality control task

Dairy Farmers of America - - Responsibilities: Perform maintenance and/or repairs on production, processing, and packaging equipment as well as utility related equipment or systems; Perform preventative maintenance; perform routine inspections of equipment for assessment of reliability and performa

Ferguson - - Responsibilities: Accurately and safely pick product quantities or store product in assigned locations; Assemble containers and maintain supplies in an organized manner; Perform daily transactional tasks using a labor management system; Maintain inventory integrity and product safety a

Compass Group - - Responsibilities: Monitor and maintain boilers; Update work statuses in the CMMS via mobile device; Inspect fluids inside boilers and related equipment; Repair boiler machinery such as piping and valves; Read blueprints.