Chemical engineer jobs in Fort Worth, TexasCreate job alerts

Company Description Amtex Energy, Inc., founded in 1987 in Midland, Texas, is an upstream oil and gas company based in Fort Worth. With decades of experience in operational drilling, the company focuses on the exploration and development of high-quality assets. Amtex operates primarily in the resource-rich Permian Basin, leveraging its expertise to drive growth and innovation. The company is committed to delivering value through responsible and efficient energy production. Position Summary This is a full-time, on-site Production Engineer role located in Fort Worth, TX. The Production Engineer will be responsible for maximizing production performance, managing field operations, and executing well interventions. The role requires close collaboration with cross-functional teams to enhance productivity, address technical challenges, and develop efficient production strategies. The description of the position includes but is not limited to the following: Job Duties • Monitor daily production performance, including oil, gas, and water volumes, and identify downtime or underperformance, • Analyze well behavior and trends to diagnose issues and recommend corrective actions, • Work closely with field personnel to address operational issues and restore production quickly, • Optimize base production across the portfolio through continuous surveillance and adjustment, • Design and execute workover and recompletion programs, including candidate selection and economic justification, • Diagnose well failures (mechanical, reservoir, or operational) and develop remediation plans, • Track performance of workovers and apply learnings to improve future results, • Design, implement, and optimize artificial lift systems, including rod pump, ESP, and gas lift, • Monitor lift performance by optimizing efficiency and reducing downtime, • Manage chemical treating programs and conduct regular performance evaluation, • Coordinate with field personnel and travel to field locations as needed, • Provide hands-on technical support for day-to-day operations and troubleshooting, • Support early production and flowback activities, • Act as primary liaison with third-party drilling and completions providers to ensure alignment with production objectives, • Review and provide input on well plans and completions designs to support long-term production performance (e.g., artificial lift readiness, stage design considerations, flowback strategy), • Monitor drilling and completions progress at a high level, ensuring operations stay aligned with AFE, timeline, and company expectations, • Support flowback and early production, ensuring a smooth transition from completions to steady-state production, • Capture and apply lessons learned from drilling and completions to improve future well performance and intervention strategies, • Analyze production and operating data using ComboCurve, Excel, and other tools, • Develop production forecasts, type curves, and economic evaluations in coordination with reservoir engineering, • Prepare weekly and monthly production and operations reports for management, • Track and analyze LOE and identify cost drivers and savings opportunities, • Prepare AFEs for workovers, recompletions, and production-related capital projects, • Track actual costs against AFE and LOE budgets; identify and address variances, • Support development of annual operating budgets in coordination with accounting and management, • Coordinate with vendors to ensure service quality, cost control, and operational efficiency, • Review and approve field invoices in a timely manner, • Ensure compliance with Texas and New Mexico regulatory entities and support regulatory filings Qualifications • Bachelor’s degree in Engineering (Petroleum, Mechanical, Chemical, or related), • 10+ years of production/operations engineering experience in upstream oil and gas, • Ability to travel frequently to the Permian Basin area, • Strong experience with workovers, recompletions, artificial lift, and well optimization, • Working knowledge of completions and drilling sufficient to coordinate with third-party providers, • Experience managing LOE, AFEs, and operational budgets, • Experience in Permian Basin operations, • Proficiency in ComboCurve, Excel, and production analysis tools, • Strong field orientation and ability to troubleshoot real-time operational issues, • Organized, responsible, and dependable Benefits include: • Medical, dental, and vision healthcare, • Life insurance, • 401(k) with company match upon eligibility, • Paid time off

Company Description Wellascent Technologies specializes in creating innovative solutions that enable organizations to optimize their operational efficiency and productivity. With a focus on technological advancements and customer-centric approaches, the company delivers tailored solutions to meet the unique needs of its clients. Wellascent Technologies is committed to fostering growth and driving success by leveraging expertise in cutting-edge processes and engineering solutions. Based in Fort Worth, TX, the company values collaboration, innovation, and excellence in every project undertaken. Role Description This is a full-time on-site role for a Process Engineer located in Fort Worth, TX. The Process Engineer will be responsible for designing, developing, and optimizing industrial processes to improve efficiency and quality. Day-to-day tasks include overseeing process control systems, troubleshooting issues, and implementing innovative solutions. Collaborating with cross-functional teams to meet project objectives and ensure compliance with safety and regulatory standards are essential aspects of the role. The candidate will also be expected to analyze and interpret data to drive continuous improvement initiatives. Qualifications • Strong knowledge and experience in Process Design and Process Engineering, • Proficiency in Process Control systems and methodologies, • Exceptional Analytical Skills for data analysis and decision-making, • Bachelor’s degree in Chemical Engineering or a related engineering discipline, • Working knowledge of industry standards and safety regulations, • Effective communication and collaboration capabilities for cross-functional teamwork, • Problem-solving mindset with a focus on continuous improvement, • Prior experience in a manufacturing or production environment is an advantage

Job Description Company Overview: MP Materials (NYSE: MP) is rebuilding American industrial capability for a new era of autonomy, robotics, and electrification. We are the only U.S. company with a fully integrated rare earth supply chain—from mining and refining to advanced metal and magnet manufacturing. Our products include both the critical materials used to make permanent magnets and the finished magnets themselves—enabling next-generation technologies in robotics, automation, aerospace, transportation, defense, and energy systems. These materials are the foundation of physical AI—the convergence of computation, movement, and control. We hire ambitious, mission-driven people who want to tackle complex challenges and shape the future of strategic industries. Our culture is rooted in teamwork, resiliency, and integrity, with a deep commitment to operational excellence and national purpose. MP is rapidly evolving from a materials producer into a leading U.S. manufacturer—and our people are driving that transformation. Position Overview: We are seeking a hands-on Electrical Engineer to join our growing Electrical Engineering team. This role offers the opportunity to be at the forefront of a greenfield project where you’ll design, develop, and optimize complex electrical systems that support a wide range of chemical, mechanical, and thermal processes. You’ll work cross-functionally with controls, operations, and mechanical engineering teams to ensure safe, efficient, and reliable infrastructure. The ideal candidate has a strong foundation in power distribution, system design, and industrial electrical standards, with the ability to take projects from concept through construction, commissioning, and operation. Position Responsibilities: • Lead the design, development, and support of low-voltage and medium-voltage electrical systems for new facility construction, process expansions, and equipment upgrades—managing all phases from concept through commissioning to full operation., • Prepare comprehensive electrical 2D design documentation, including Single-line diagrams and schematics, Load and power distribution layouts, Grounding and lightning protection systems, Cable and conduit routing plans, Panel schedules, PLC/control panel layouts, Network diagrams and P&IDs. All using tools such as AutoCAD and AutoCAD Electrical., • Review and approve vendor and contractor submittals, ensuring alignment with project specifications, safety standards, and applicable electrical codes (e.g., NEC, IEEE)., • Collaborate with cross-functional engineering teams (process, mechanical, controls, and civil) to ensure electrical systems are integrated effectively and designed to meet all project, safety, and regulatory requirements., • Support other engineers by developing design documentation, electrical calculations, technical reports, and specifications as required., • Assist in system-level analysis, including load calculations, short-circuit studies, arc flash assessments, and protective device coordination using tools like SKM PowerTools., • Contribute to the creation and enforcement of internal electrical design standards, templates, and documentation protocols., • Provide field engineering support during construction, commissioning, and startup, including resolving RFIs, reviewing redlines, and ensuring as-built accuracy., • Develop and maintain maintenance and troubleshooting procedures for electrical infrastructure to support safe and efficient long-term operations., • Participate in interpreting and applying industry codes, standards, and best practices, such as NEC, IEEE, IEC, OSHA, and NRTL guidelines., • Bachelor’s degree in Electrical Engineering, Electrical Engineering Technology, or a related field., • 3+ years of relevant experience in electrical design, preferably in an industrial, chemical, or manufacturing environment., • Proficient with AutoCAD and AutoCAD Electrical for schematic and layout design., • Working knowledge of electrical codes and standards: NEC, IEEE, IEC, OSHA, NRTL, and UL., • Experience designing and reviewing control panels, distribution panels, and motor control systems., • Understanding of power system components, including transformers, switchgear, MCCs, VFDs, UPS, and backup generators., • Ability to read and interpret P&IDs, equipment specifications, and process flow diagrams., • Proficient in Microsoft Office (Excel, Word, PowerPoint)., • Strong communication and collaboration skills to work effectively across disciplines and with field technicians. Your Right to Work – In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment verification document form upon hire. For Assistance with Application - Alternative methods of applying for employment are available to individuals unable to submit an application through this site because of a disability. Contact Human Resources Department at 702-625-5679; 1700 South Pavilion Center Dr. 8th Floor, Las Vegas, NV 89135 to discuss reasonable accommodation.

Job DescriptionCompany Description We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results – for our people, our clients, and our company. We're a people-centric firm, so it's no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. Job Description Olsson offers its clients a full spectrum of water and wastewater services, including a complete line of planning, design, permitting, and construction phase services. Maintaining water quality is Olsson's number one concern, and we are able to respond to a broad set of client demands in a timely and cost-effective manner. As a Wastewater Treatment Subject Matter Expert, you will be responsible for mentoring, quality, technical excellence, and design reviews. The Subject Matter Expert provides direction on design and development activities across the firm to improve or design new concepts and processes for services within the discipline, focusing on technical performance and production, technical innovation, and quality. Key Responsibilities: • Serves as a subject matter expert for the firm, acting as an advisor internally and externally and elevating the level of technical capabilities related to wastewater treatment., • Provides firmwide direction, internal consultation, and services to clients in a specialized service or discipline integral to the firm., • Ensure all processes and systems comply with local, state, and federal regulations. Prepare and review compliance documentation and reports., • Maintains a reputation as a technical expert outside of the firm; writes papers, gives technical presentations, and/or regularly represents the firm in professional and technical societies., • Promotes efficiencies in producing quality work and ensures quality control standards are maintained., • Researches and analyzes wastewater-related data, trends, and emerging technologies to provide insights and recommendations internally and externally., • Builds and maintains relationships with key stakeholders and industry partners to stay informed of developments and to identify opportunities for collaboration., • May represent the firm on governing bodies of professional organizations to elevate the profession and the firm's brand., • Working collaboratively with others., • Having ownership in the work you do., • Strong communication skills., • Ability to contribute and work well on a team., • Bachelor's degree in Engineering required. Master's degree in Chemical, Civil, Mechanical, or Environmental Engineering preferred., • Must be a licensed professional engineer (PE)., • 12+ years of experience in water/wastewater process engineering., • Strong technical background and experience in wastewater treatment, wastewater modeling, and regulatory compliance., • Experience in leading and mentoring others., • Innovative and proactive approach to problem-solving., • Strong organizational skills and attention to detail., • Commitment to continuous learning and professional development, including participation in professional organizations. #LI-RS1 Actual compensation will vary based on factors such as experience, qualifications, geographic location, skills, education, and internal equity. Colorado Pay Range$156,000—$241,000 USD The typical annual salary range for this role is as listed below. Compensation may vary based on geographic location, experience, and qualifications. Employees in this role may be eligible for our performance‑based bonus and merit increases. National Pay Range$140,000—$241,000 USDAdditional Information Olsson specializes in engineering and design, client advisory services, planning, field services, and environmental. Improving the world has been our mindset from the very beginning, back when Olsson first opened for business in 1956. And it will be our mindset for years to come. As an Olsson employee, you will: • Receive a competitive 401(k) match, • Be empowered to build your career with tailored development paths, • Have the possibility for flexible work arrangements, • Engage in work that has a positive impact on communities Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here.

Job Description Company Overview: MP Materials (NYSE: MP) is rebuilding American industrial capability for a new era of autonomy, robotics, and electrification. We are the only U.S. company with a fully integrated rare earth supply chain—from mining and refining to advanced metal and magnet manufacturing. Our products include both the critical materials used to make permanent magnets and the finished magnets themselves—enabling next-generation technologies in robotics, automation, aerospace, transportation, defense, and energy systems. These materials are the foundation of physical AI—the convergence of computation, movement, and control. We hire ambitious, mission-driven people who want to tackle complex challenges and shape the future of strategic industries. Our culture is rooted in teamwork, resiliency, and integrity, with a deep commitment to operational excellence and national purpose. MP is rapidly evolving from a materials producer into a leading U.S. manufacturer—and our people are driving that transformation. Position Overview: MP Materials is seeking a Senior Engineer to join the Magnet Technology group to support development technologies for advanced manufacturing to produce high-performance rare earth permanent magnets. In this role, the Senior Engineer will lead R&D projects to optimize the materials and processing of magnets, including casting, powder processing, pressing, sintering, recycling, and more. Responsibilities include designing custom experimental setups, running experimental campaigns on pilot-scale equipment, and materials characterization using techniques such as magnetometry, microscopy, and chemical analysis. The Senior Engineer will manage and mentor a team of engineers and technicians to deliver new, scalable technologies for manufacturing rare-earth permanent magnets. This is a rare opportunity to play a key role in returning an essential manufacturing capability to the USA. Position Responsibilities: • Lead experimental projects, overseeing project planning, execution, and delivery of scalable new materials and processes for rare-earth permanent magnets., • Design and conduct experiments to optimize new materials and processes for rare[1]earth permanent magnets., • Leverage materials characterization techniques including SEM, XRD, LECO, etc. to fundamentally understand the underlying mechanisms of magnetic properties., • Supervise and mentor junior engineers and technicians, providing technical guidance in metallurgical materials and fostering a culture of continuous learning and professional development., • Collaborate with process and product development teams to leverage pilot equipment and scale new technologies., • Work closely with EHS to ensure that all work is done to ensure world-class health and safety, and full compliance with relevant environmental regulations., • Engage external institutions including university researchers, strategic partners, and government laboratories to add value from new technologies and applied research., • Represent MP Materials within the industry by publishing in technical and trade journals and presenting at conferences., • Ph.D. in Materials Science & Engineering, Metallurgy, Physics, or related field., • 5+ years of industry experience in casting, pressing, sintering, or heat treatment of metals and/or ceramics., • Experience with metallurgical manufacturing processes and materials characterization methods., • Deep understanding of materials, thermodynamics, and kinetics., • Agile researcher, adept at identifying untested questions about materials and the interactions between processing, structure, and performance., • Experience with manufacturing of rare earth materials and permanent magnets., • Experience leading technical development projects and direct reports, with the ability to prioritize and manage multiple concurrent projects., • Strong skills in analyzing experimental data using tools such as Python, MATLAB, or statistical software to draw actionable insights and guide decision-making. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law. Underrepresented groups/Women/Disabled/Veterans are encouraged to apply. Candidates whose disabilities make them unable to meet the position’s requirements will still be considered qualified if they can perform the essential functions of the job with reasonable accommodation. Your Right to Work – In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment verification document form upon hire. For Assistance with Application - Alternative methods of applying for employment are available to individuals unable to submit an application through this site because of a disability. Contact Human Resources Department at 702-844-6111; dial 7 when prompted for HR; 1700 South Pavilion Center Dr. 8th Floor, Las Vegas, NV 89135 to discuss reasonable accommodation.

Job DescriptionReady to make connectivity from space universally accessible, secure and actionable? Then you’ve come to the right place! E-Space is bridging Earth and space to enable hyper-scaled deployments of Internet of Things (IoT) solutions and services. We are building a highly-advanced low Earth orbit (LEO) space system that will fundamentally change the design, economics, manufacturing and service delivery associated with traditional satellite and terrestrial IoT systems. We’re intentional, we’re unapologetically curious and we’re 100% committed to innovate space-based communications and deliver actionable intelligence that will expand global economies, protect space and our planet and enhance our overall quality of life. We are seeking a skilled and detail-oriented Chemical Bath Deposition (CBD) Process Engineer to develop, operate, and optimize wet-chemical thin-film deposition processes within a roll-to-roll (R2R) manufacturing environment. This hands-on role requires strong expertise in chemistry, solution preparation, process control, wet deposition kinetics, and high-volume manufacturing techniques. The ideal candidate has experience with thin-film coating processes, chemical reaction control, and continuous-flow or R2R wet-processing equipment. What you'll be doing: • Develop, optimize, and maintain chemical bath deposition processes for thin-film layer formation on flexible substrates., • Operate and own R2R chemical coating equipment, including solution delivery, heating, mixing, agitation, web movement, and drying systems., • Prepare chemical solutions, adjust concentrations, control reaction kinetics, and maintain precise bath chemistry to ensure consistent film growth., • Monitor real-time process variables (temperature, pH, flow, concentration, deposition rate, web tension, alignment) and define control limits., • Perform routine inspections, calibrations, and preventive maintenance on CBD and R2R equipment., • Troubleshoot process deviations, identify root causes, and implement corrective actions., • Work closely with engineering, quality, and production teams to scale processes from lab/pilot to high-volume manufacturing., • Maintain accurate records of chemical usage, batch logs, deposition parameters, and production results according to SOPs., • Ensure full compliance with chemical handling, safety, and environmental protocols. What you will bring to this role:, • Advanced degree in Chemistry, Chemical Engineering, Materials Science, Engineering Technology, or related technical field., • Minimum 5 years of hands-on experience in chemical deposition processes for thin films (CBD, wet coating, electrochemical, plating, sol-gel, or similar)., • Strong understanding of wet-chemical reaction control, solution stability, stoichiometry, and bath kinetics., • Experience operating or developing roll-to-roll (R2R) or web-based chemical processing equipment., • Familiarity with process control, analytical measurements (pH, concentration, thickness), and statistical process methods., • Ability to work safely with chemicals, pressurized systems, heated baths, and cleanroom protocols. Extra points for the following:, • Experience scaling chemical processes from lab to pilot to production., • Knowledge of industrial chemical delivery systems, metering pumps, filtration, or recirculation systems., • Background in continuous wet-coating or immersion-based deposition systems. • An opportunity to really make a difference• Sustainability at our core• Fair and honest workplace• Innovative thinking is encouraged• Competitive salaries• Continuous learning and development• Health and wellness care options• Financial solutions for the future • Optional legal services (US only)• Paid holidays• Paid time off We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Company Overview: MP Materials (NYSE: MP) is rebuilding American industrial capability for a new era of autonomy, robotics, and electrification. We are the only U.S. company with a fully integrated rare earth supply chain—from mining and refining to advanced metal and magnet manufacturing. Our products include both the critical materials used to make permanent magnets and the finished magnets themselves—enabling next-generation technologies in robotics, automation, aerospace, transportation, defense, and energy systems. These materials are the foundation of physical AI—the convergence of computation, movement, and control. We hire ambitious, mission-driven people who want to tackle complex challenges and shape the future of strategic industries. Our culture is rooted in teamwork, resiliency, and integrity, with a deep commitment to operational excellence and national purpose. MP is rapidly evolving from a materials producer into a leading U.S. manufacturer—and our people are driving that transformation. Position Overview: The Senior Quality Systems Engineer will be a member of our new Magnetics Business headquartered in Fort Worth, Texas. This is an opportunity to be a part of building our team, our factory, our systems, and our culture as the Magnetics team helps to define the future of American manufacturing. The successful candidate will be a highly organized and detail-oriented professional with experience in the development, implementation, and sustaining of Quality Management Systems (QMS) in compliance with internal, customer, and certification body requirements. This is a rare opportunity to have a central role in designing and implementing an entire QMS for a greenfield advanced manufacturing facility that is the shaping future of American manufacturing. MP Materials is committed to re-establishing a domestic American supply chain for rare earth magnets, and the new Magnetics facility will perform a mix of chemical, electrical, mechanical, thermal, and machining processes. The Senior Quality Systems Engineer will need to engage with a broad range of internal technical specialists and gain a working understanding of the processes involved to effectively lead the development, implementation, and sustaining of the new QMS. The Senior Quality Systems Engineer will drive third party engagements to ensure that the QMS is integrated as needed with vendor and customer requirements and is compliant with required third party certifications. Position Responsibilities: • Leadership role in ensuring industry best-practices are incorporated into the development and implementation of the new Quality Management System (QMS) for MP Magnetics., • Ensure the new QMS is compliant with all required third party certifications, including ISO 9001 and IATF 16959 certifications (or equivalent)., • Manage internal audit program (scheduling, reporting, and conducting), and support all third-party certification and auditing processes., • Work closely with customer reps to ensure that MP Magnetics’ QMS are compliant with all customer requirements and integrated as needed with customer systems., • Work closely with suppliers to ensure that their QMS are compliant with MP Magnetics’ requirements and integrated as needed with MP Magnetics’ QMS., • Lead non-compliance corrective action activities from internal and external (customer, supplier, and certification) audits., • Ensure that all in-house systems and procedures are updated, revised, and modified as needed to meet the needs of both customers and external certification bodies, while ensuring the simplicity and ease of execution that facilitates their consistent use., • Lead in the development and implementation of Control Plans, FMEA and inspection documents for production analysis., • Participate in and facilitate FMEA and troubleshooting activities, and update quality documentation accordingly. Communicate resulting changes to relevant stakeholders and track outcomes to ensure lessons learned from quality events are carried forward., • BS or MS in engineering discipline., • 5+ years quality systems experience under relevant quality regimes., • ISO 9001 Lead Auditor Certified., • Trained and experienced with Core Tools, such as Control Plans, FMEA, SPC, APQP/PPAP., • Experience managing both Internal and External (customer and surveillance) audits., • Strong sense of process flow and practical requirements., • Good understanding of human factors., • Previous work in industrial settings and hands-on approach to projects., • Experience and management of root cause analysis, corrective and preventative actions programs., • Quality Core Tool (FMEA, APQP, PPAP, and SPC) Training certified., • Experience in materials science/metallurgy-driven manufacturing environments., • Experience with Tier 1 telecommunication supply., • Progressive responsibility growth in career., • Lean and Six Sigma certifications. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law. Underrepresented groups/Women/Disabled/Veterans are encouraged to apply. Candidates whose disabilities make them unable to meet the position’s requirements will still be considered qualified if they can perform the essential functions of the job with reasonable accommodation. Your Right to Work – In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment verification document form upon hire. For Assistance with Application - Alternative methods of applying for employment are available to individuals unable to submit an application through this site because of a disability. Contact Human Resources Department at 702-844-6111; dial 7 when prompted for HR; 1700 South Pavilion Center Dr. 8th Floor, Las Vegas, NV 89135 to discuss reasonable accommodation.

Job Description Company Overview: MP Materials (NYSE: MP) is rebuilding American industrial capability for a new era of autonomy, robotics, and electrification. We are the only U.S. company with a fully integrated rare earth supply chain—from mining and refining to advanced metal and magnet manufacturing. Our products include both the critical materials used to make permanent magnets and the finished magnets themselves—enabling next-generation technologies in robotics, automation, aerospace, transportation, defense, and energy systems. These materials are the foundation of physical AI—the convergence of computation, movement, and control. We hire ambitious, mission-driven people who want to tackle complex challenges and shape the future of strategic industries. Our culture is rooted in teamwork, resiliency, and integrity, with a deep commitment to operational excellence and national purpose. MP is rapidly evolving from a materials producer into a leading U.S. manufacturer—and our people are driving that transformation. Position Overview: The Senior Applications Engineer will have a technical background and will understand how customers use the unique properties of rare earth permanent magnets across a variety of end use applications. They will be familiar with the broad range of chemical, thermal, and mechanical, and thermal processes used to produce magnets, magnet assemblies, and electric motors. They will be experienced at working with customers in the design and quoting process. They will also have experience building the underlying tools and systems to support these processes. In addition to responding to requests from current and prospective customers, the successful candidate will play a critical role in identifying current and future product value by synthesizing customer needs and market trends. This is an opportunity to be a part of building our team, our factory, and our culture as the Magnetics team helps to define the future of American manufacturing. Position Responsibilities: • Act as the permanent magnet subject matter expert with existing and potential customers in reviewing requests for quotes and other requests for information; interpreting customer requests into well-defined product requirements., • Lead cross-functional project execution to integrate MP magnets into customer applications:, • Engage with customer technology teams to understand, communicate, and negotiate product requirements with customers., • Coordinate with cross-functional teams to provide customers with samples and prototypes., • Synthesize and communicate short and long duration customer project goals based on current business conditions and evolving customer and market needs., • Develop, deploy, and continuously improve tools for the effective and timely quoting of new products; train and support the sales team as needed in the use of the tools., • BS or higher in mechanical or electrical engineering, or other relevant engineering disciplines., • 5+ years in as an applications engineer., • Working knowledge of magnetic properties and experience specifying rare earth permanent magnet grades for applications such as traction motors, actuators, and sensors including end use applications and key performance metrics., • Experience working directly with external customers to understand technical needs and translate them into operational actions and product specifications., • Experience partnering with commercial teams to generate product specifications and quotations., • Ability to effectively communicate with a spectrum of different roles, from customers to senior leaders to manufacturing operators., • Excellent written and verbal communication skills, including the ability to prepare well-written documents for reporting to customers and leadership., • Entrepreneurial mindset, with the ability to prioritize and manage multiple concurrent projects., • Hands-on experience in materials manufacturing, ideally the manufacturing of rare earth materials, permanent magnets, and/or ceramic and metal powders., • Experience conducting market studies to evaluate, interpret and forecast design trends and component requirements for electric machines. Your Right to Work – In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment verification document form upon hire. For Assistance with Application - Alternative methods of applying for employment are available to individuals unable to submit an application through this site because of a disability. Contact Human Resources Department at 702-625-5679; 1700 South Pavilion Center Dr. 8th Floor, Las Vegas, NV 89135 to discuss reasonable accommodation.

Job Description Company Overview: MP Materials (NYSE: MP) is rebuilding American industrial capability for a new era of autonomy, robotics, and electrification. We are the only U.S. company with a fully integrated rare earth supply chain—from mining and refining to advanced metal and magnet manufacturing. Our products include both the critical materials used to make permanent magnets and the finished magnets themselves—enabling next-generation technologies in robotics, automation, aerospace, transportation, defense, and energy systems. These materials are the foundation of physical AI—the convergence of computation, movement, and control. We hire ambitious, mission-driven people who want to tackle complex challenges and shape the future of strategic industries. Our culture is rooted in teamwork, resiliency, and integrity, with a deep commitment to operational excellence and national purpose. MP is rapidly evolving from a materials producer into a leading U.S. manufacturer—and our people are driving that transformation. Position Overview: The new facility will contain a broad range of chemical, mechanical, and thermal processes, and the Senior Electrical Operations Engineer will be expected to oversee the safe and efficient operation of electrical infrastructure in a manufacturing environment, serving as the technical lead for troubleshooting, maintenance, and system upgrades. The Senior Electrical Operations Engineer will lead the efforts to constantly upgrade and improve site safety, operating efficiency, reliability, and redundancy of electrical systems, to outperform as a state-of-the-art facility. Position Responsibilities: • Lead as a subject matter expert in the safe, efficient, and reliable operation of electrical systems, driving OPEX and continuous improvement initiatives across the facility., • Identify, prioritize, and execute electrical projects aimed at reducing operating expenses, optimizing energy usage, and improving system performance., • Conduct operational assessments and system reviews to uncover inefficiencies, propose data[1]driven solutions, and implement performance-enhancing upgrades., • Collaborate cross-functionally with Operations, Engineering, Finance, and EHS teams to scope, justify, and implement electrical OPEX projects., • Champion a safety-first culture by enforcing adherence to electrical safety standards, participating in field reviews, and integrating risk-reduction strategies into project design and execution., • Drive root cause analysis (RCA) investigations for recurring electrical issues, inefficiencies, or unplanned costs—ensuring corrective actions are implemented and validated., • Develop, document, and deploy electrical engineering standards and procedures that support long-term operational excellence and cost-efficiency., • Support engineering, construction, and commissioning teams with real-time operational input to ensure new designs align with plant needs and long-term OPEX goals., • Monitor and report on the impact of implemented improvements, including KPIs such as energy savings, cost reductions, system uptime, and process optimization., • Deliver technical training and documentation to operations staff, ensuring consistent understanding of electrical system enhancements and energy efficiency practices., • Bachelor’s degree in Electrical Engineering or a related engineering discipline., • Minimum 10 years of experience in electrical engineering, with a strong background in industrial or manufacturing environments., • Proficient in ERP systems, Microsoft Office Suite, and electrical design and analysis tools such as AutoCAD, AutoCAD Electrical, and SKM PowerTools., • Hands-on experience in engineering, troubleshooting, and optimizing control voltage, low-voltage (LV), and medium-voltage (MV) electrical systems., • Skilled in performing power system studies, including load calculations, short-circuit analysis, arc flash assessments, and protective device coordination., • Solid understanding of electrical engineering principles with cross-functional knowledge of mechanical and process systems., • Professional certifications in Six Sigma, reliability engineering, manufacturing systems, or industrial automation are highly desirable., • Strong working knowledge of relevant industry standards and regulatory codes, including NEC, IEEE, NETA, OSHA, NRTL, and UL., • Experience with critical electrical infrastructure such as uninterruptible power supplies (UPS), diesel/gas generators, switchgear, power distribution units, VFDs, and automatic/static transfer switches., • Skilled in setting clear priorities and making sound, timely decisions in fast-paced, high-stakes operational environments., • Consistently dependable in meeting deadlines and delivering accurate, detailed technical documentation., • Demonstrated analytical and problem-solving strengths, with a continuous improvement mindset and drive for innovation. Your Right to Work – In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment verification document form upon hire. For Assistance with Application - Alternative methods of applying for employment are available to individuals unable to submit an application through this site because of a disability. Contact Human Resources Department at 702-625-5679; 1700 South Pavilion Center Dr. 8th Floor, Las Vegas, NV 89135 to discuss reasonable accommodation.

Job Description Company Overview: MP Materials (NYSE: MP) is rebuilding American industrial capability for a new era of autonomy, robotics, and electrification. We are the only U.S. company with a fully integrated rare earth supply chain—from mining and refining to advanced metal and magnet manufacturing. Our products include both the critical materials used to make permanent magnets and the finished magnets themselves—enabling next-generation technologies in robotics, automation, aerospace, transportation, defense, and energy systems. These materials are the foundation of physical AI—the convergence of computation, movement, and control. We hire ambitious, mission-driven people who want to tackle complex challenges and shape the future of strategic industries. Our culture is rooted in teamwork, resiliency, and integrity, with a deep commitment to operational excellence and national purpose. MP is rapidly evolving from a materials producer into a leading U.S. manufacturer—and our people are driving that transformation. Position Overview: The new facility will contain a broad range of chemical, mechanical, and thermal processes, including electrowinning, strip casting, powder production, pressing & sintering, machining, and assembly. Because of the broad range of processes in use, it is important that the Design Engineer have a diverse technical background with the ability to engage with a broad range of technical specialists and gain a working understanding of the physical processes, key control metrics, and potential hazards involved. The successful candidate will also be passionate about pairing design work with much of the actual “dirty hands” work to ensure that everything works as intended initially and over time. Position Responsibilities: • Works closely with broader process engineering, controls engineering, and manufacturing teams to create automated processes with an integrated process flow., • Supports and leads the design, manufacturing, installation, and commissioning activities to deliver projects from concept to fully operational in the plant., • Delivers finished designs, detailed drawings, and engineering specifications for supplier bidding, and leads vendor compliance efforts after purchase., • Ability to lead Design Engineering technician(s) to achieve required tasks., • Conducts and participates in technical design reviews, supplier evaluations and internal and external compliance audits to relevant industrial standards (ASTM, ISO etc)., • Perform CAD, FEA, and durability simulations as required of concept designs to provide recommendations for physical prototype candidates, execute testing, and ensure successful commissioning and ongoing operation., • Research and implement automation systems, detailed design, component sourcing, manufacture, and deployment of manufacturing equipment., • Works closely with EHS to ensure that all work is done to ensure world class health and safety, and full compliance with relevant environmental regulations., • Documents all work for seamless handoff to end users, prepares technical reports, and follows all corporate change management procedures., • Lead and support continuous improvement activities to produce ongoing, meaningful improvements to worker safety, process uptime, and product quality., • BS or MS in mechanical engineering, chemical engineering, or related field., • At least 5 years process design and automation experience within a manufacturing environment., • Knowledge in automation of industrial processes and materials handling., • Experience in machine design and testing., • Knowledge of statistical process control, and experience in designing control systems., • Broad knowledge and experience across multiple CAD tools., • Excellent spatial visualization and reasoning skills, with a history of conceiving of successful creative designs for bespoke problems., • Project Management and hands-on approach to projects., • Sound knowledge of Process Safety., • Good understanding of human factors in manufacturing., • At least 5 years equipment design and process automation experience in metals, semiconductor, or specialty chemicals industries preferred., • Ability to identify and solve problems, and effectively communicate and advocate for these solutions to others (from operators to management)., • Excellent written and verbal communication skills. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law. Underrepresented groups/Women/Disabled/Veterans are encouraged to apply. Candidates whose disabilities make them unable to meet the position’s requirements will still be considered qualified if they can perform the essential functions of the job with reasonable accommodation. Your Right to Work – In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment verification document form upon hire. For Assistance with Application - Alternative methods of applying for employment are available to individuals unable to submit an application through this site because of a disability. Contact Human Resources Department at 702-844-6111; dial 7 when prompted for HR; 1700 South Pavilion Center Dr. 8th Floor, Las Vegas, NV 89135 to discuss reasonable accommodation.

Job Description Multidisciplinary design firm is seeking a Wastewater Treatment Engineer to join their Fort Worth team as a subject matter expert! Responsibilities: • Advise internal/external teams on all wastewater treatment issues, • As the subject matter expert on wastewater treatment, provide firm-wide direction, internal consultation, and services to clients, • Ensure all processes/systems comply with local, state, and federal regulations, • Prepare/review compliance documentation and reports, • Maintain reputation as technical expert by writing papers, giving technical presentations, and/or regularly represent the firm in professional/technical societies, • Produce quality work and ensure QC standards are maintained, • Research/analyze wastewater-related data, trends, and emerging technologies, • Build/maintain client relationships, • Represent firm at professional organizations, • Lead/manage water/wastewater treatment projects from design through implementation, • Prepare detailed project plans, budgets, and schedules, • Mentor/train junior staff Requirements: • Bachelor’s degree in engineering, • Master’s degree in chemical, civil, mechanical, or environmental engineering preferred, • 10+ years of water/wastewater processing engineering experience, • PE License, • Strong technical background/experience in wastewater treatment, wastewater modeling, and regulatory compliance Salary is commensurate with experience. Successful applicants must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! 517-906-6926

Job Description Hazen and Sawyer is seeking a water engineer with a minimum of 10 years of experience to join our Dallas or Fort Worth office. Candidate to be involved with a wide range of water infrastructure projects, which can include treatment process design and construction, distribution systems, wastewater conveyance, including pumping and pipelines. In addition to the technical requirements, the position requires experience with project management or the desire to grow into a project management role. Position will include high level of client development and management, supported by our Texas offices. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • Participation in the evaluation, planning, and design of water, wastewater, stormwater, reuse, and infrastructure projects, • Participation in a project team from the initial study and conceptual design stages through to the construction of major water related infrastructure projects, • Fieldwork and site visits from design through construction may be required, • Other responsibilities may include:, • Project management of a large project or several small projects, • Client development and management supported by our local offices, • Bachelor’s degree in environmental, civil, chemical, or mechanical engineering, • PE license, • Strong interest in the water/wastewater industry, • Excellent communication skills, self-motivation, organization, and attention to detail, • Must be proficient in Microsoft Office Suite, • A minimum of 10 years of experience in planning, design, or construction of water-related projects, • Experience related to preparing conceptual/feasibility studies, development of construction drawings and specifications, bidding assistance, and support of office and field-related construction services, • Familiarity with engineering and construction management software, • Advanced degree (Master’s or Doctorate) in environmental, civil or mechanical engineering, • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job Description Company Overview: MP Materials (NYSE: MP) is rebuilding American industrial capability for a new era of autonomy, robotics, and electrification. We are the only U.S. company with a fully integrated rare earth supply chain—from mining and refining to advanced metal and magnet manufacturing. Our products include both the critical materials used to make permanent magnets and the finished magnets themselves—enabling next-generation technologies in robotics, automation, aerospace, transportation, defense, and energy systems. These materials are the foundation of physical AI—the convergence of computation, movement, and control. We hire ambitious, mission-driven people who want to tackle complex challenges and shape the future of strategic industries. Our culture is rooted in teamwork, resiliency, and integrity, with a deep commitment to operational excellence and national purpose. MP is rapidly evolving from a materials producer into a leading U.S. manufacturer—and our people are driving that transformation. Position Overview: MP Materials is seeking a dynamic and experienced Senior Applications Engineer for its Magnetics business located in Fort Worth, TX. The Applications Engineering team is responsible for working with our external customers and with MP Materials’ commercial, engineering, and manufacturing teams to ensure we are delivering the right products, on time, for each application at competitive costs. The Applications Engineering team will review customers’ technical needs, recommend the correct products (performance, cost, geometry), understand and be able to explain the competitive landscape internally and to the customer, and contribute to the design and development of the prototyping, measurement and production equipment needed to deliver on customer needs. The Senior Applications Engineer will be action-oriented, willing to get their hands dirty, and have experience in manufacturing. The successful candidate will play a critical role in identifying current and future product value by synthesizing customer needs and market trends, representing the voice of the customer within the broader engineering team, and have a deep understanding of relevant materials, properties and manufacturing processes required for permanent magnets. The successful candidate for this role will understand how customers use the unique properties of rare earth permanent magnets across a variety of end use applications, as well as the broad range of chemical, mechanical, and thermal processes used to produce magnets, magnet assemblies, and electric motors. Position Responsibilities: • Acts as the primary technical contact with existing and potential customers in designing, specifying, prototyping, and quoting products., • Works with customers to transition new products into manufacturing, and scale to high volume., • Develop models, tools, presentations, and documents to succinctly summarize and communicate with customers., • Manage the technical interfaces between customers and cross-functional MP Materials teams to design and manufacture rare earth magnets., • Act as a hands-on member of the engineering team, using excellent communication and organizational skills to guide and inform customer-related activities., • Interpret, understand, and negotiate product requirements and test methods (e.g., statement of requirements) between MP and customers., • Synthesize and communicate short and long duration customer project goals based on current business conditions and evolving customer and market needs., • Identify value opportunities for MP Materials products, to be realized through applications engineering, product or process development, continuous improvement activities, and/or long-term strategic initiatives., • BS or higher in mechanical, materials or electrical engineering, or in another relevant engineering discipline., • Working knowledge of rare earth magnets and/or use applications for permanent magnets (motors, sensors, etc.) and key performance metrics., • 5+ years’ experience in applications engineering or related activities., • Experience with materials manufacturing, particularly metals or metal powder., • Experience working directly with external customers to understand technical needs and translate them into operational actions and product specifications., • Experience partnering with commercial teams to generate product specifications and quotations., • Ability to effectively communicate across a spectrum of different roles internally and externally, from engineers, to procurement, to senior leaders, to manufacturing operators., • Excellent written and verbal communication skills., • Entrepreneurial mindset, with the ability to prioritize and manage multiple concurrent projects., • Deep working knowledge of the design of electric devices and/or magnets for electric devices., • Familiarity with rare earth permanent magnet grades and magnetic properties., • Deep working knowledge of the manufacturing processes for rare earth permanent magnets. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law. Underrepresented groups/Women/Disabled/Veterans are encouraged to apply. Candidates whose disabilities make them unable to meet the position’s requirements will still be considered qualified if they can perform the essential functions of the job with reasonable accommodation. Your Right to Work – In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment verification document form upon hire. For Assistance with Application - Alternative methods of applying for employment are available to individuals unable to submit an application through this site because of a disability. Contact Human Resources Department at 702-844-6111; dial 7 when prompted for HR; 1700 South Pavilion Center Dr. 8th Floor, Las Vegas, NV 89135 to discuss reasonable accommodation.

Job Description Suzhou Junchuang Auto Technologies, established in June 2005, is headquartered in Mudu Town, China - a historic town with a 2,500-year legacy on the shores of Taihu Lake. The company is committed to attracting top talent and fostering a culture that values family, innovation, and excellence. Our goal is to be the world-class automotive supplier, guided by our dedication to the highest standards of professionalism, technology, quality, and satisfaction. We prioritize not only our customers but also the well-being and satisfaction of our employees, ensuring a supportive and rewarding work environment. Benefits: • Full medical/health benefits, • 401k Retirement plan, • Salary: $70,000 to $75,000 per year Our work environment includes both modern office spaces and advanced manufacturing facilities specializing in plastic injection molding technology. In our contemporary office setting, you'll collaborate in a professional atmosphere featuring state-of-the-art IT infrastructure and ergonomic workstations. On the manufacturing floor, you'll find a cutting-edge plastic injection molding plant where precision and innovation come together. While we ensure top-notch quality in component production, you may occasionally notice mild odors and temperature variations typical of the manufacturing process. Safety is a top priority, with stringent protocols in place to ensure a secure workplace. The EHS Specialist/ Facility Engineer is responsible for developing, implementing, and maintaining environmental, health, and safety (EHS) management systems to ensure compliance with federal, state, and local regulations. This role involves overseeing EHS standards for construction, renovation, and operational activities, conducting safety audits, coordinating training, and maintaining compliance with relevant reporting requirements. The EHS Engineer also supports plant services management, ensuring the effective maintenance and operation of equipment and energy-efficient practices. Requirements/Responsibilities EHS Management Work • Develop and maintain company EHS flowcharts and management systems, • Oversee EHS requirements for new construction, renovation, and expansion projects, • Investigate workplace incidents/injuries and manage corrective action follow-up, • Coordinate EHS emergency drills and training programs, • Review and supervise high-risk work operations, • Conduct safety hazard audits with follow-up and closure management, • Liaise with regulatory agencies including EPA, Fire Department, and OSHA Plant Services Management Work Requirements: • Recent graduate, • Certified Safety Professional (CSP) certification required, • Proficient in Microsoft Office Suite Simply submit a ZippyApp application package which may include the Common Employment Application, Resume, and a Cover Letter. In your Cover Letter, please write a short paragraph describing yourself and why you would make a great addition to our team. ZippyApp is the Common Employment Application for online and mobile that allows you to apply for jobs with one click, and is being accepted at a growing number of businesses each day.

Location: Fort Worth, TX Salary: $81,000 - $83,000 per year with $62,130 Compensation at 100% plan (Uncapped bonus for exceeding plan) Who are we? Established in 1975, Shimadzu Scientific Instruments is one of the largest suppliers of analytical instrumentation, physical testing, and environmental monitoring systems in the world. Ground-breaking scientific research, manufacturing ideas, and results continue to propel Shimadzu's outstanding reputation and "Excellence in Science." People dedicated to our mission have the largest impact on Shimadzu's continued growth and success. Would YOU like to join a diverse team of professionals working together with researchers, scientists, and manufacturers to help better lives worldwide? What can Shimadzu offer YOU? • Our Culture: A work environment that values diversity, inclusion & belonging, • Competitive Compensation: Day 1 Benefits & Competitive Salary, • Retirement Benefits: Matching 401K & Profit-Sharing Program, • Professional Growth: Clear pathways for Career, Leadership, and Personal Development, • Health Benefits: Flexible Spending/Health Savings Accounts, • Work-Life Balance: Generous & Front-Loaded Paid Time Off Plan, • Education: Tuition Assistance Program for both graduate and undergraduate levels, • Insurance Perks: Pet Insurance, optional Identity theft, legal pre-paid and critical care buy-up insurance benefits, generous company-paid life insurance & short-term disability programs, • Work Flexibility: Business casual Dress Attire & casual (jeans) Friday!, • Employee Engagement: Employee Resource Groups to network, build a sense of community and enhance one's career and personal development ADDITIONAL COMPENSATION: * • For Service, Technical Support, Marketing & Sales Roles: Additional compensation is available through either an Incentive and/or Commission Plan. Shimadzu Scientific Instruments is seeking a highly motivated Field Sales Engineer to join our team! In this account-focused role, you will be responsible for selling and supporting Shimadzu's Analytical Instrument portfolio. As a trusted advisor, the Field Sales Engineer builds and maintains strong, long-term customer relationships, identifies opportunities for strategic growth, and collaborates cross-functionally to deliver an exceptional customer experience. Serving as the primary point of contact for assigned accounts, you will provide sales expertise, mentorship, and leadership across all account activities. Success in this role is defined by consistently meeting or exceeding sales targets while embodying our commitment to excellence. We value diverse backgrounds and perspectives and encourage all qualified individuals to apply. Market focus areas include Chemical Manufacturing, Semiconductor, Pharma QA/QC, Environmental, Industrial, Food Safety, and the Academic Sector. JOB FUNCTIONS INCLUDE, BUT ARE NOT LIMITED TO: Sales & Business Development: • Identify and prioritize new client opportunities; manage and grow existing accounts., • Develop and execute strategic sales plans to achieve revenue goals., • Provide consultative support and product guidance to customers., • Deliver technical presentations and represent Shimadzu at trade shows and industry events., • Coordinate with field application specialists and lab teams to deliver technical solutions., • Operate in a collaborative, team-based sales environment., • Generate quotes, negotiate terms, and manage the closing process., • Ensure compliance with procurement processes and purchasing protocols. EDUCATION AND QUALIFICATIONS: • Bachelor's degree in a life science discipline; Chemistry strongly preferred, • Minimum of 3 years of successful sales experience with relevant analytical instruments, including:, • Chromatography (GC and HPLC), • Mass Spectrometry (GCMS and LCMS Single Quadrupoles), • Spectroscopy (atomic and molecular) or similar technologies, • Strong technical knowledge of analytical instrumentation, with the ability to communicate complex concepts clearly, • Proven experience in developing and executing sales and/or field marketing strategies to drive growth and account expansion, • Proficient in the use of CRM systems for pipeline management, forecasting, and reporting, • Valid driver's license required, • Willingness to travel up to 50% overnight At Shimadzu Scientific Instruments, we believe in providing structured career paths that recognize and reward talent. If your expertise surpasses the level specified in the listed position, we offer the flexibility to upgrade positions to better suit your qualifications accompanied by a salary adjustment. COMPENSATION AND BENEFITS: This role is an exempt, full-time position that is benefits eligible. For a complete listing of our benefits, including a 401K matching program and discretionary yearly contributions, please visit ___. Detailed information on each benefit, including providers and costs, will be provided to candidates during the final interview stage. Shimadzu offers 10 paid vacation days, 8 paid personal days, 8 scheduled holidays, and 3 floating holidays in the first year of employment. (Note: Residents of California and Puerto Rico will have the 8 personal days substituted with state-required sick leave hours on a per-pay accrual basis.) After one year, employees are eligible for a generous short-term disability program, with 100% of the monthly premiums covered by the company. Employees are insured at 100% of their salary for the first 6 weeks and 66.67% of their salary for weeks 7-12. The starting salary range for this position is $81,000 to $83,000 annually, with compensation paid on a semi-monthly, exempt salaried basis. Additional variable compensation includes a commission plan based on sales territory performance, paid each payroll period. A discretionary year-end bonus may also be provided based on overall company performance. The offer package includes a company car with a fuel card, subject to a $55 per pay deduction for personal use. A company phone is also provided, fully paid by the employer, and can be used for personal purposes while remaining 100% company property. Shimadzu is not accepting unsolicited assistance from search firms for this employment opportunity. Please, no phone calls or emails. All resumes submitted by search firms to any employee at Shimadzu via email, the Internet or in any form and/or method without a valid written search agreement in place for this position (and agency was requested to work the requisition) will be deemed the sole property of Shimadzu. No fee will be paid in the event the candidate is hired by Shimadzu as a result of the referral or through other means. EEO Statement: Shimadzu Scientific Instruments (SSI) is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, citizenship, color, family or medical care leave, gender identity or expression, genetic information, immigration status, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran or military status, race, ethnicity, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable local laws, regulations and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application process, please ___. BehaviorsFunctional Expert - Considered a thought leader on a subject Innovative - Consistently introduces new ideas and demonstrates original thinking Detail Oriented - Capable of carrying out a given task with all details necessary to get the task done well Team Player - Works well as a member of a group Thought Provoking - Capable of making others think deeply on a subject EducationBachelors of Chemistry (required) Skills • Sales (required), • Instrument- HPLC (required), • Instrument- GC (required), • Instrument- LCMS (required), • Instrument- GCMS (required) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

Job Description: Process Engineer Huntsman is seeking a Process Engineer supporting the Polyurethanes Division located in Arlington, Texas. This position will report to the Plant Director. Job Scope The facility Process Engineer is responsible for troubleshooting problems with chemical manufacturing processes in the facility. Support facility projects and commission process improvements. Evaluate process equipment and processes to identify ways to optimize performance and ensure compliance with safety and environmental regulations. Design replacement equipment and plan layout of new equipment. Design monitoring and control systems improvements based on data trending and analysis. The facility Process Engineer directs process standardization, automation, and improvement for the Huntsman Building Solutions Facility. In summary, as the Process Engineer, you will: • Active, vocal participant and advocate for the facility safety culture. Act as an enthusiastic leader to ensure the safety of all facility employees., • Member of Facility Leadership team, working together to achieve plant level KPI., • Conducting research to develop and streamline processes for manufacturing., • Evaluating processes and equipment to ensure compliance with environmental and safety regulations., • Conducting inspections and identifying potential hazards. Devise and execute solutions to remove workplace hazards., • Implement a behavioral based safety culture and processes that will include 5S., • Designing and planning equipment layout., • Developing routines and best practices to ensure product quality., • Keeping abreast of the latest EHS trends, policies, regulations, and best practices., • Works with all plant functions to generate and maintain appropriate process documents and standard operating procedures. Drives MOC process as needed to address all plant activities., • Estimating production costs., • Lead and assist maintenance in resolving equipment malfunctions, troubleshooting process problems, and organize/implement preventative maintenance procedures., • Performing optimization tests., • Results-oriented problem solver in an ever-changing environment with strong troubleshooting skills., • Utilizes process simulation software to test and find the most appropriate production strategies., • Active leader in facility operations excellence objectives., • Drives facility automation and data acquisition strategies., • Works with leadership team to develop and monitor the capital and expense budgets., • Various duties as assigned. Qualifications You must possess the below minimum qualifications to be initially considered for this position. Preferred qualifications are in addition to the minimum requirements and are considered a plus factor in identifying top candidates. The candidate must have an unrestricted right to work for Huntsman in the United States. Minimum Qualifications • The position requires a Bachelor of Science (B.S.) degree in Chemical Engineering or related engineering degree. This position requires a minimum of 7+ years of experience in Process Engineering or Chemical Engineering applicable field experience., • Knowledge and experience with creating, reviewing, and implementing standard operating procedures., • Knowledge and experience with PLC and/or DCS driven operations., • Knowledge and experience in batch chemical blending operations., • Applicable experience in EHS standards related to specialty chemical manufacturing. Skills and knowledge • Knowledge of chemical composition and properties of the chemicals used and an understanding of chemical reactions they undergo., • Knowledge of raw materials, production processes, quality control, and costs., • Knowledge of design techniques, tools, and principles involved in the processing of chemicals from raw materials to final products., • An awareness of all assigned processes, including auxiliary units., • Knowledge of geometry, calculus, probability, statistics, and their applications., • Trained in or capable of learning Aspen simulation software, advanced Excel techniques, regression analysis, and developing and understanding PFDs and P&IDs., • Ability to lead and teach process improvement culture., • Ability to develop and conduct training programs related to general manufacturing processes for the facility workforce., • Strong leadership skills., • Able to communicate effectively and professionally at all levels of the business organization and plant., • Advanced knowledge of production machinery and processes., • General familiarity with applicable EHS standards related to specialty chemical manufacturing., • The ability to read and interpret safety data sheets. Preferred Qualifications • A challenge of the position is to assist in improving and optimizing operations at the facility., • The ability to tell when something is wrong or is likely to go wrong., • Choosing the right mathematical methods and formulas to solve a problem., • Applying general rules to specific problems to make sensible recommendations., • Combining pieces of information to form general rules and find hidden relationships., • Effectively communicate information and ideas to ensure clear understanding by others. Working Environment • Indoor manufacturing environment., • Working around dangerous chemicals., • Must be able to walk up and down flights of stairs, make repetitive movements, walk, stand, lift items overhead, and bend., • Position is on site, in person. Huntsman is proud to promote equal opportunity in the workplaceAll qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, national origin, disability, age, or any other protected characteristic. All unsolicited resumes presented by recruitment agencies are treated as pro bono information or service and will not be compensated. Huntsman is aware ofscamsinvolving fraudulent job offers. We do not make job offers until after a candidate hassubmittedajob application and hasparticipatedin an interview.Please be advised that anyjob offer that requires payment or requires you to deposit a check islikely ascam.If you have questions about any open positions at Huntsman or Rubison, please visit our Careers website at___. Additional Locations:

The Process Engineer will be responsible for designing, developing, and optimizing industrial processes to improve efficiency and quality. Bachelor’s degree in Chemical Engineering or a related engineering discipline. Wellascent Technologies is committed to fostering growth and driving success by

Job Description Company Overview: MP Materials (NYSE: MP) is rebuilding American industrial capability for a new era of autonomy, robotics, and electrification. We are the only U.S. company with a fully integrated rare earth supply chain—from mining and refining to advanced metal and magnet manufacturing. Our products include both the critical materials used to make permanent magnets and the finished magnets themselves—enabling next-generation technologies in robotics, automation, aerospace, transportation, defense, and energy systems. These materials are the foundation of physical AI—the convergence of computation, movement, and control. We hire ambitious, mission-driven people who want to tackle complex challenges and shape the future of strategic industries. Our culture is rooted in teamwork, resiliency, and integrity, with a deep commitment to operational excellence and national purpose. MP is rapidly evolving from a materials producer into a leading U.S. manufacturer—and our people are driving that transformation. Position Overview: We are seeking a Senior Electrical Engineer to lead electrical design and execution for our new advanced manufacturing facility. This is a leadership role overseeing a team of Electrical Engineers and Electrical Drafters, providing technical guidance, project oversight, and professional development support as MP expands its engineering capabilities. This position offers a rare opportunity to play a pivotal role in the development of a greenfield facility that integrates chemical, thermal, and mechanical processes—pushing the boundaries of American manufacturing and sustainability. Position Responsibilities: • Lead a team of Electrical Engineers and Drafters, setting priorities, assigning tasks, reviewing work, and conducting performance evaluations., • Provide technical leadership across the full project lifecycle—from concept design, procurement, and construction to commissioning and operational support., • Manage and develop electrical system designs, including low- and medium-voltage distribution, motor controls, lighting, grounding, and lightning protection systems., • Ensure all engineering deliverables are complete, high-quality, and compliant with applicable codes (NEC, IEEE, IEC) and internal standards., • Oversee and approve detailed electrical drawings and documentation (e.g., schematics, one-line diagrams, panel layouts, cable routing, and conduit schedules)., • Review and validate vendor submittals, ensuring conformance with design specifications and regulatory standards., • Support field engineering and commissioning efforts, resolving technical issues during construction, testing, and startup., • Drive implementation of power management and SCADA-integrated systems for site-wide load management and operational efficiency., • Mentor junior engineers and drafters, providing technical coaching, training, and career development support., • Collaborate with mechanical, controls, process, and OT teams to ensure seamless integration of electrical systems with plant operations., • Lead or support engineering standards development and ensure adherence to internal design and documentation best practices., • Champion electrical safety, regulatory compliance, and risk mitigation strategies across all project phases., • Bachelor’s degree in electrical engineering or electrical engineering technology., • Minimum of 10 years of progressive experience in electrical engineering, including at least 3 years in technical leadership or supervisory role., • Proficient in AutoCAD, AutoCAD Electrical, SKM PowerTools, and Microsoft Office Suite., • Strong understanding of medium-voltage (MV) distribution systems, power system design, load studies, and protective coordination., • Extensive knowledge of electrical codes and standards, including NEC, NESC, IEEE, IEC, OSHA, UL, and NRTL., • Broad engineering knowledge including electrical, mechanical, process, instrumentation, and their integration in industrial environments., • Experience with project management methodologies (e.g., PMI), capable of managing multiple engineers, drafters, and supporting staff across concurrent projects., • Demonstrated project leadership, organizational agility, and strong communication skills across teams and stakeholders., • Skilled in prioritizing work, managing deadlines, and delivering high-quality engineering documentation in fast-paced environments., • Awareness and application of occupational safety standards and electrical system hazard prevention., • Professional Engineer (PE) license preferred., • Experience with high-voltage (HV) electrical systems, industrial automation, and control systems., • Proficiency in 3D design tools, such as Navisworks and SolidWorks., • Proven ability to manage external design consultants and electrical contractors, ensuring quality and alignment with project goals., • Strong analytical, troubleshooting, and decision-making skills for resolving complex engineering challenges., • Demonstrated ability to communicate effectively with multidisciplinary teams and stakeholders at all levels., • Detail-oriented with a strong commitment to innovation, continuous improvement, and sustainable engineering practices., • Thrive in fast-paced, hands-on, cross-functional environments, balancing technical depth with practical execution., • Dependable in meeting deadlines and delivering high-quality, comprehensive design documentation. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law. Underrepresented groups/Women/Disabled/Veterans are encouraged to apply. Candidates whose disabilities make them unable to meet the position’s requirements will still be considered qualified if they can perform the essential functions of the job with reasonable accommodation. Your Right to Work – In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment verification document form upon hire. For Assistance with Application - Alternative methods of applying for employment are available to individuals unable to submit an application through this site because of a disability. Contact Human Resources Department at 702-844-6111; dial 7 when prompted for HR; 1700 South Pavilion Center Dr. 8th Floor, Las Vegas, NV 89135 to discuss reasonable accommodation.

Job Description Our client, a leading steel service center and fabrication organization, is seeking a Process Engineer to support enterprise-wide operational improvement initiatives across manufacturing, logistics, and fabrication operations. This role will focus on process optimization, continuous improvement, operational efficiency, and process standardization within a fast-paced industrial environment. The organization is actively modernizing operations through improved process discipline, data-driven decision-making, and operational transformation initiatives. This position offers the opportunity to work closely with plant leadership and cross-functional teams to drive measurable improvements in throughput, quality, safety, and cost performance. Position Summary The Process Engineer will design, improve, and optimize production and logistics processes while supporting continuous improvement efforts across operations. This individual will partner with operations, fabrication, maintenance, quality, distribution, and leadership teams to reduce waste, improve efficiency, and establish sustainable process controls and operational standards. The ideal candidate is comfortable balancing hands-on production floor engagement with analytical problem-solving and data analysis. This role is well-suited for someone who enjoys driving operational improvements through both technical expertise and strong collaboration with frontline teams. Key Responsibilities * Analyze current production and operational workflows to identify opportunities for improved throughput, safety, quality, and efficiency * Design and implement future-state processes, standard work procedures, and process controls * Lead continuous improvement initiatives including Lean, 5S, Kaizen, and waste reduction activities * Conduct root cause analysis and implement corrective actions for operational and process-related issues * Troubleshoot process bottlenecks and collaborate with maintenance and production teams to resolve equipment and workflow challenges * Develop time studies, labor models, and capacity analyses to support operational planning and throughput goals * Recommend process, staffing, tooling, equipment, and layout improvements to increase efficiency and productivity * Partner with operational technology and data systems teams to validate production data and support process improvement initiatives * Create and maintain SOPs, work instructions, visual management tools, and operator training materials * Support the implementation and sustainment of process controls and operational standards * Partner with quality teams to support compliance initiatives, audit readiness, and adherence to customer requirements * Monitor and report operational KPIs including OEE, scrap, rework, cycle time, yield, and throughput metrics * Present improvement initiatives, findings, and performance updates to plant leadership and cross-functional stakeholders Qualifications * Bachelor's degree in Industrial Engineering, Mechanical Engineering, Chemical Engineering, Process Engineering, or related field preferred * Experience in process engineering, manufacturing engineering, industrial engineering, or continuous improvement within a manufacturing environment * Strong understanding of process design, process optimization, and operational workflows * Experience with Lean manufacturing principles, continuous improvement methodologies, and process standardization * Strong analytical and problem-solving skills with proficiency in Excel or Google Sheets * Familiarity with statistical analysis, process control methods, and manufacturing performance metrics * Hands-on approach with the ability to work directly on the production floor and collaborate with operations teams * Strong communication and interpersonal skills with the ability to influence and train cross-functional teams * Ability to manage multiple projects and priorities in a fast-paced manufacturing environment Preferred Qualifications * Experience with Lean manufacturing, 5S, Kaizen, value stream mapping, or capacity planning * Exposure to PFMEA, control plans, and new process or equipment implementation * Experience within steel processing, fabrication, heavy manufacturing, or industrial production environments preferred * Familiarity with fabrication processes such as cutting, forming, welding, and material handling systems Work Environment * Daily interaction with manufacturing, fabrication, and industrial production environments * Ability to work on the production floor around active machinery, material handling equipment, noise, dust, and industrial operations * Must be comfortable collaborating directly with operators, supervisors, maintenance teams, and plant leadership Ideal Candidate The ideal candidate is a practical, data-driven engineer who enjoys solving operational challenges and improving manufacturing performance through collaboration, process discipline, and continuous improvement. This individual is comfortable working both on the shop floor and with operational data, and is motivated by driving measurable improvements in efficiency, safety, quality, and throughput. Company DescriptionW3Global was established in 2006 in Fremont, CA with a vision: simplify the recruiting process and develop an industry-disrupting platform to connect candidates with clients. Our cutting-edge Applicant Tracking System enables us to find the right person for the right job, creating value for job seekers and employers. While W3Global initially focused on IT staffing, we have expanded the business to serve many other industries, including accounting and finance, legal, engineering, human resources, government and more. We’re proud of the investments we’ve made in our team, having grown from four to 1000 employees and evolving into one of the leading recruitment and staffing solution providers in the industry. Our recruiters and account managers are passionate about connecting qualified professionals with the right positions in small, medium, and large companies. Our Services W3Global understands the natural ups and downs of an organization’s staffing needs. We are continuously adapting to industry and economic changes to find the right candidates. We specialize in placing permanent, direct, contract, and temporary positions for companies of any size. Our recruiting services include sourcing, recruiting, screening, interview management, salary negotiations, training, and onboarding. We are committed to helping organizations redefine their recruitment process by delivering our SaaS-based proprietary application tracking system software. Our Expertise W3Global has been delivering staffing solutions for nearly two decades; we know which recruiting strategies work best. Our expert team is committed to developing a customized solution to fit your company’s unique needs. As a W3Global client, you’ll also receive personalized assistance from a seasoned team of staffing specialists. We are committed to providing both technical support and industry expertise to simplify the hiring process. We know that your time matters. W3Global will help you streamline the hiring process, getting it done and getting it right.W3Global was established in 2006 in Fremont, CA with a vision: simplify the recruiting process and develop an industry-disrupting platform to connect candidates with clients. Our cutting-edge Applicant Tracking System enables us to find the right person for the right job, creating value for job seekers and employers. While W3Global initially focused on IT staffing, we have expanded the business to serve many other industries, including accounting and finance, legal, engineering, human resources, government and more.\r\n\r\nWe’re proud of the investments we’ve made in our team, having grown from four to 1000 employees and evolving into one of the leading recruitment and staffing solution providers in the industry. Our recruiters and account managers are passionate about connecting qualified professionals with the right positions in small, medium, and large companies.\r\n\r\nOur Services\r\nW3Global understands the natural ups and downs of an organization’s staffing needs. We are continuously adapting to industry and economic changes to find the right candidates.\r\n\r\nWe specialize in placing permanent, direct, contract, and temporary positions for companies of any size. Our recruiting services include sourcing, recruiting, screening, interview management, salary negotiations, training, and onboarding.\r\n\r\nWe are committed to helping organizations redefine their recruitment process by delivering our SaaS-based proprietary application tracking system software.\r\n\r\nOur Expertise\r\nW3Global has been delivering staffing solutions for nearly two decades; we know which recruiting strategies work best. Our expert team is committed to developing a customized solution to fit your company’s unique needs.\r\n\r\nAs a W3Global client, you’ll also receive personalized assistance from a seasoned team of staffing specialists. We are committed to providing both technical support and industry expertise to simplify the hiring process. We know that your time matters. W3Global will help you streamline the hiring process, getting it done and getting it right.

Job Description Hazen and Sawyer is seeking an entry-level engineer for our Fort Worth office. As part of our design and process teams, you will work on water and wastewater projects, including drinking water/wastewater/reuse treatment facility upgrades, conveyance systems, wellfields, stormwater management, water resources, and asset management. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • Assist in preparing engineering deliverables, including sampling studies, condition assessments, process modeling, hydraulics, and design reports, • Work directly with senior level engineering team providing mentoring opportunities to learn and develop, • Manage data for process modeling and design, • Attend client and internal project management meetings, • Coordinate with manufacturers and vendors to select equipment, • Support multiple projects from planning through construction, • Participate in fieldwork and site visits (mostly in-state), • B.S. in Environmental, Civil, Chemical, or Mechanical engineering, • Strong interest in the water/wastewater industry, • Strong communication skills, self-motivation, organization, and attention to detail, • Must be proficient in Microsoft Office Suite, • EIT certification, • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job Description The Finishing Engineer is responsible for overseeing all aspects of the finishing process, including powder coating, pretreatment, and curing. This role ensures high-quality finished products, regulatory compliance, process optimization, and efficient material management. The position also leads continuous improvement efforts while maintaining strict environmental and safety standards. Key Responsibilities * Develop, optimize, and document standard operating procedures (SOPs) for paint and pretreatment processes * Perform and monitor quality inspections and testing on finished products * Maintain and control pretreatment chemical concentrations through routine titration and system monitoring * Monitor powder paint storage conditions and manage inventory levels * Ensure wastewater documentation and regulatory compliance are maintained in accordance with environmental standards * Ensure adherence to safety and environmental health standards * Maintain quality control documentation, inspection records, and test results * Collaborate with suppliers to ensure optimal product performance for specific applications * Troubleshoot finishing defects such as orange peel, poor adhesion, flaking, improper curing, or contamination * Drive continuous improvement initiatives to increase efficiency, reduce defects, and minimize waste Education & Experience * Bachelor's degree in Manufacturing, Mechanical Engineering, or a related field * 3-5 years of relevant experience in finishing, powder coating, or similar manufacturing environment * Strong understanding of powder coat paint processes * Working knowledge of paint equipment, processes, and control systems * Familiarity with Lean Manufacturing principles * Understanding of workplace safety programs and objectives Skills & Competencies * Experience in powder coating, finishing engineering, or related manufacturing roles * Strong knowledge of powder application systems, cure ovens, and pretreatment systems * Ability to analyze paint defects and implement corrective actions * Experience with chemical titration and process control * Strong problem-solving and troubleshooting abilities * Ability to work independently and make data-driven decisions * Strong organizational and documentation skills * Ability to perform effectively in a fast-paced manufacturing environment Company DescriptionW3Global was established in 2006 in Fremont, CA with a vision: simplify the recruiting process and develop an industry-disrupting platform to connect candidates with clients. Our cutting-edge Applicant Tracking System enables us to find the right person for the right job, creating value for job seekers and employers. While W3Global initially focused on IT staffing, we have expanded the business to serve many other industries, including accounting and finance, legal, engineering, human resources, government and more. We’re proud of the investments we’ve made in our team, having grown from four to 1000 employees and evolving into one of the leading recruitment and staffing solution providers in the industry. Our recruiters and account managers are passionate about connecting qualified professionals with the right positions in small, medium, and large companies. Our Services W3Global understands the natural ups and downs of an organization’s staffing needs. We are continuously adapting to industry and economic changes to find the right candidates. We specialize in placing permanent, direct, contract, and temporary positions for companies of any size. Our recruiting services include sourcing, recruiting, screening, interview management, salary negotiations, training, and onboarding. We are committed to helping organizations redefine their recruitment process by delivering our SaaS-based proprietary application tracking system software. Our Expertise W3Global has been delivering staffing solutions for nearly two decades; we know which recruiting strategies work best. Our expert team is committed to developing a customized solution to fit your company’s unique needs. As a W3Global client, you’ll also receive personalized assistance from a seasoned team of staffing specialists. We are committed to providing both technical support and industry expertise to simplify the hiring process. We know that your time matters. W3Global will help you streamline the hiring process, getting it done and getting it right.W3Global was established in 2006 in Fremont, CA with a vision: simplify the recruiting process and develop an industry-disrupting platform to connect candidates with clients. Our cutting-edge Applicant Tracking System enables us to find the right person for the right job, creating value for job seekers and employers. While W3Global initially focused on IT staffing, we have expanded the business to serve many other industries, including accounting and finance, legal, engineering, human resources, government and more.\r\n\r\nWe’re proud of the investments we’ve made in our team, having grown from four to 1000 employees and evolving into one of the leading recruitment and staffing solution providers in the industry. Our recruiters and account managers are passionate about connecting qualified professionals with the right positions in small, medium, and large companies.\r\n\r\nOur Services\r\nW3Global understands the natural ups and downs of an organization’s staffing needs. We are continuously adapting to industry and economic changes to find the right candidates.\r\n\r\nWe specialize in placing permanent, direct, contract, and temporary positions for companies of any size. Our recruiting services include sourcing, recruiting, screening, interview management, salary negotiations, training, and onboarding.\r\n\r\nWe are committed to helping organizations redefine their recruitment process by delivering our SaaS-based proprietary application tracking system software.\r\n\r\nOur Expertise\r\nW3Global has been delivering staffing solutions for nearly two decades; we know which recruiting strategies work best. Our expert team is committed to developing a customized solution to fit your company’s unique needs.\r\n\r\nAs a W3Global client, you’ll also receive personalized assistance from a seasoned team of staffing specialists. We are committed to providing both technical support and industry expertise to simplify the hiring process. We know that your time matters. W3Global will help you streamline the hiring process, getting it done and getting it right.

Job Description Company Overview: MP Materials (NYSE: MP) is rebuilding American industrial capability for a new era of autonomy, robotics, and electrification. We are the only U.S. company with a fully integrated rare earth supply chain—from mining and refining to advanced metal and magnet manufacturing. Our products include both the critical materials used to make permanent magnets and the finished magnets themselves—enabling next-generation technologies in robotics, automation, aerospace, transportation, defense, and energy systems. These materials are the foundation of physical AI—the convergence of computation, movement, and control. We hire ambitious, mission-driven people who want to tackle complex challenges and shape the future of strategic industries. Our culture is rooted in teamwork, resiliency, and integrity, with a deep commitment to operational excellence and national purpose. MP is rapidly evolving from a materials producer into a leading U.S. manufacturer—and our people are driving that transformation. Position Overview: MP Materials is seeking a hands-on Senior Engineer to join the Magnet Technology group to support development technologies for advanced manufacturing to produce high-performance rare earth permanent magnets. The Senior Engineer will specialize in hands-on experimental development efforts related to front-end magnet-making processes, including but not limited to strip casting, powder processing, pressing, and sintering. Responsibilities include designing custom experimental setups, running experimental campaigns on pilot-scale equipment, and materials characterization using techniques such as magnetometry, microscopy, and chemical analysis. The role encompasses a broad range of initiatives, from designing materials for optimum performance to developing and optimizing manufacturing processes. This is a rare opportunity to play a key role in returning an essential manufacturing capability to the USA. Position Responsibilities: • Design and conduct experiments to optimize new materials and processes for rare-earth permanent magnets., • Leverage materials characterization techniques including SEM, XRD, particle size analysis, etc. to suggest actionable process improvements., • Collaborate with production teams to scale processes from pilot to manufacturing operations., • Generate technical reports and SOPs, document and communicate findings, and build team knowledge of current and future magnet prototyping., • Work closely with EHS to ensure that all work is done to ensure world-class health and safety, and full compliance with relevant environmental regulations., • Bachelor’s or Master’s degree in Materials Science & Engineering, Metallurgy, Mechanical Engineering, or related field., • Experience with materials processing in metals, ceramics or related systems., • Knowledge and experience of process development in areas such as casting, powder metallurgy, pressing or sintering., • Proficiency in materials characterization techniques such as XRD, SEM, and particle size analysis., • Demonstrated ability to design and execute experiments, analyze data and draw actionable conclusions., • Experience with manufacturing of rare earth materials and permanent magnets., • 2+ years of experience in manufacturing or R&D demonstrating successful process development across metals, ceramics, or related systems., • Strong troubleshooting skills with pilot plant equipment and process control., • Experience leading technical development projects, with the ability to prioritize and manage multiple concurrent projects., • Strong skills in analyzing experimental data using tools such as Python, MATLAB, or statistical software to draw actionable insights and guide decision-making. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law. Underrepresented groups/Women/Disabled/Veterans are encouraged to apply. Candidates whose disabilities make them unable to meet the position’s requirements will still be considered qualified if they can perform the essential functions of the job with reasonable accommodation. Your Right to Work – In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment verification document form upon hire. For Assistance with Application - Alternative methods of applying for employment are available to individuals unable to submit an application through this site because of a disability. Contact Human Resources Department at 702-844-6111; dial 7 when prompted for HR; 1700 South Pavilion Center Dr. 8th Floor, Las Vegas, NV 89135 to discuss reasonable accommodation.

Job Description Company Overview: MP Materials (NYSE: MP) is rebuilding American industrial capability for a new era of autonomy, robotics, and electrification. We are the only U.S. company with a fully integrated rare earth supply chain—from mining and refining to advanced metal and magnet manufacturing. Our products include both the critical materials used to make permanent magnets and the finished magnets themselves—enabling next-generation technologies in robotics, automation, aerospace, transportation, defense, and energy systems. These materials are the foundation of physical AI—the convergence of computation, movement, and control. We hire ambitious, mission-driven people who want to tackle complex challenges and shape the future of strategic industries. Our culture is rooted in teamwork, resiliency, and integrity, with a deep commitment to operational excellence and national purpose. MP is rapidly evolving from a materials producer into a leading U.S. manufacturer—and our people are driving that transformation. Position Overview: The Process Engineer – Powder will be an integral part of the team designing and building a new metal, alloy, and magnet-making facility. This is a rare opportunity to have a central role in the development of a greenfield advanced manufacturing facility and helping to define the future of American manufacturing. The ideal candidate will have hands- on experience in controlling metal powder production processes such as powder conveyance, hydrogen decrepitation, jet milling, classification, blending, quality control and other related powder processing techniques. The Process Engineer must be comfortable with equipment fault diagnosis, process development, PLCs, and P&ID. This position reports into a Senior Engineering Manager. The new facility will contain a broad range of chemical, mechanical, and thermal processes, including electrowinning, strip casting, powder production, pressing & sintering, machining, and assembly. Because of the broad range of processes in use, it is important that the Process Engineer be able to engage with a broad range of technical specialists and gain a working understanding of the physical processes, key control metrics, and potential hazards involved. The key aspect of this role is to provide technical coordination and support to the powder processing operation to meet customer requirements. Position Responsibilities: • Member of the Production Engineering team. Work with production team members of upstream and downstream processes to execute the products for customers., • Work with procurement, vendors, maintenance, operators, and other team members on equipment specification, design reviews, and commissioning of new plant., • Contribute to EHS risk assessments, HAZOP studies, and regulatory compliance., • Plan, execute, and assist with process, and procedure development for hydrogen decrepitation (HD) furnace, Jet milling, dry grinding and powder blending., • Work closely with the NPI team in new process development and deployment in industrial scale., • Provide technical training and support to the production team and technicians on process knowledge., • Evaluate customer requirements and work in partnership with broader manufacturing and engineering teams to define process control plans to meet customer specifications., • Monitors and directs changes to key operating parameters under area of responsibility driving to achieve high yield, consistent product quality, and minimal EHS impacts., • Supervise the daily use of quality control procedures, driving initiatives to ensure stable and efficient powder processing operations., • Investigate and resolve equipment and quality issues within HD furnace, Jet Milling and subprocesses, working with QA, production, and customer service to address any product quality or customer complaints., • Document and disclose intellectual property and assist in patent filing preparation and defense., • BS degree in Metallurgy/Materials Science, Mechanical, Chemical Engineering, Chemistry, or related field., • 3-5 years’ experience in metal powder processing with industrial scale processes and equipment., • Deep understanding of powder metallurgy processes for part manufacturing and powder quality control fundamentals such as particle size distribution (PSD), particle flowability, particle agglomeration, and more., • Knowledge and experience in gathering and tracking process control information for SPC., • Problem solving experience (FMEA, 8D, A3, Root Cause Analysis etc.)., • Excellent written and verbal communication skills., • Experienced user of Microsoft Office suite., • 5+ years of experience of industrial experience powder manufacturing, processing, and/or conducting powder metallurgy processes., • Deep technical knowledge of metal powder pulverization and hydrogen furnace operation., • Practical experience of the process safety associated with metal powder processing., • Experience with SAP., • Ability to identify and solve problems and convince others (management down to operators) that your solution is the right one. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law. Underrepresented groups/Women/Disabled/Veterans are encouraged to apply. Candidates whose disabilities make them unable to meet the position’s requirements will still be considered qualified if they can perform the essential functions of the job with reasonable accommodation. Your Right to Work – In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment verification document form upon hire. For Assistance with Application - Alternative methods of applying for employment are available to individuals unable to submit an application through this site because of a disability. Contact Human Resources Department at 702-844-6111; dial 7 when prompted for HR; 1700 South Pavilion Center Dr. 8th Floor, Las Vegas, NV 89135 to discuss reasonable accommodation.

Job DescriptionCompany Overview: MP Materials (NYSE: MP) is rebuilding American industrial capability for a new era of autonomy, robotics, and electrification. We are the only U.S. company with a fully integrated rare earth supply chain—from mining and refining to advanced metal and magnet manufacturing. Our products include both the critical materials used to make permanent magnets and the finished magnets themselves—enabling next-generation technologies in robotics, automation, aerospace, transportation, defense, and energy systems. These materials are the foundation of physical AI—the convergence of computation, movement, and control. We hire ambitious, mission-driven people who want to tackle complex challenges and shape the future of strategic industries. Our culture is rooted in teamwork, resiliency, and integrity, with a deep commitment to operational excellence and national purpose. MP is rapidly evolving from a materials producer into a leading U.S. manufacturer—and our people are driving that transformation. Position Overview: MP Materials is seeking a hands-on Senior Engineer to lead the development of advanced technologies for producing high-purity rare earth metal and alloys, critical for high-performance permanent magnets. This role focuses on developing and scaling electrometallurgical and pyrometallurgical technologies – including but not limited to molten salt electrolysis and metallothermic reduction The ideal candidate will bring deep expertise in extractive metallurgy, and apply a combination of experimental research, process modeling, and material science expertise to design, optimize, and scale metal making pathways. This position will play a pivotal role in restoring strategic manufacturing capabilities to the U.S. Position Responsibilities: • Lead the development and optimization of rare earth metal and alloy production processes., • Design and execute laboratory and pilot-scale experiments involving high-temperature reaction kinetics, molten salt systems, and reduction pathways., • Apply simulation tools to model the thermodynamics, transport phenomena, and electrochemical behavior in rare earth metal extraction and refining., • Translate lab and pilot-scale findings into scalable, production ready processes., • Collaborate cross-functionally with R&D, manufacturing, and quality teams to align process development with operational goals., • Characterize materials using techniques such as XRD, XRF, LECO, and SEM., • Utilize electrochemical instrumentation (e.g., galvanostats, potentiostats) and techniques (e.g., cyclic voltammetry, impedance spectroscopy) to tune and evaluate processes., • Document all projects, provide written guidance for model usage, and build team knowledge of current and future rare earth research., • Work closely with EHS to ensure that all work is done to ensure world-class health and safety, and full compliance with relevant environmental regulations ., • Engage with university researchers, strategic partners, and government laboratories involved in rare earth reduction research to bring value and knowledge to MP Materials., • Ph.D. in Materials Science & Engineering, Metallurgy, Chemical Engineering, Electrochemistry, or related field., • 3+ years of hands-on experience with molten salt electrolysis and/or metallothermic reduction processes., • Experience with electrochemical instrumentation and techniques., • Strong theoretical and experimental background in electrochemistry, transport phenomena, thermodynamics, and kinetics., • Agile researcher, adept at identifying untested questions about materials and processes., • Experience building furnace reactors, electrolysis cells, and custom experimental setups for electrometallurgy and/or pyrometallurgy processes., • Experience with rare earth metal, alloy, and/or magnet making processes., • Experience leading technical development projects, with the ability to prioritize and manage multiple concurrent projects., • Experience with thermodynamic modeling software such as FactSage and simulation tools such as finite element analysis and computational fluid dynamics., • Experience with programming, and the ability to apply those skills to automate routine analysis, data management, and process control operations. Your Right to Work – In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment verification document form upon hire. For Assistance with Application - Alternative methods of applying for employment are available to individuals unable to submit an application through this site because of a disability. Contact Human Resources Department at 702-844-6111; dial 7 when prompted for HR; 1700 South Pavilion Center Dr. 8th Floor, Las Vegas, NV 89135 to discuss reasonable accommodation.

Job Description Job Title: Environmental Program Manager II Location: Remote, USA with strong preference to candidates in Arkansas, Louisiana, New Mexico, Oklahoma, or Texas Description/Job Summary POSITION DESCRIPTION The Program Manager II is responsible for leading and managing the company’s Environmental Protection Agency (EPA) contracts within EPA Region 6 and other regions and ensuring all projects are executed in alignment with client expectations, contractual requirements, and company objectives. This role oversees EPA-related projects and project teams, provides strategic leadership, supports business development efforts within the EPA portfolio, and serves as a primary point of contact for client engagement. The Program Manager II also plays a key role in mentoring and developing staff, including program and project managers, to ensure consistent and successful project delivery. The Program Manager II has the potential to work fully remotely with occasional travel to project sites and HGL offices. If a candidate resides within commuting distance of an HGL office and would like to work hybrid, that option is also available to them. Preference is for candidates who reside within EPA Region 6 (Arkansas, Louisiana, New Mexico, Oklahoma, and Texas). Responsibilities/Duties WHAT YOU'LL BE DOING Program and Staff Management: • Support the EPA program and direct all EPA-related contracts and CLIN (Contract Line-Item Number) project managers within the region., • Manage and support a team of staff, including formal employee mentorship to provide guidance and professional development., • Communicate and connect with various departments (proposal development, contracts, chemistry, data management, etc.) to ensure that they are properly coordinating and functioning to support the region. Project Oversight and Delivery: • Ensure EPA projects are delivered on time, within budget, and in compliance with project scope of work and contract requirements and client expectations., • Conduct routine meetings with project managers to monitor project progress, review deliverables, and provide strategic direction., • Guide and enforce company best practices for consistent EPA project execution across teams., • Address and resolve project issues and challenges, including navigating complex client and team dynamics., • Serve as a Senior Project Manager., • Uphold contract and company required QA/QC and Health and Safety standards. Client and Stakeholder Engagement: • Serve as the liaison with EPA clients, fostering strong relationships to ensure satisfaction and repeat business., • Coordinate with external stakeholders for scope and cost sensitive items including EPA clients and state and local agencies as needed for specific projects., • Respond to client inquiries and proactively address client needs to maintain high levels of satisfaction. Proposal and Business Development: • Organize and lead proposal efforts for EPA-related opportunities, working closely with technical teams, HGL leadership, and teaming partners to submit high-quality and competitive proposals., • Assist in growing the company’s EPA portfolio, identifying new opportunities, and contributing to long-term client engagement strategies., • Evaluate potential project opportunities for profitability and alignment with company goals., • Support planning for and attendance of client sponsored Industry Day events and conferences. Process Improvement and Standardization: • Contribute to the development and refinement of internal guidelines and processes for program and project management to ensure consistency across teams., • Mentor project managers on best practices and standardized approaches to ensure high-quality service delivery. Minimum Requirements WHAT YOU NEED TO BE SUCCESSFUL • Bachelor’s degree in Science, Environmental Science, Engineering, or related field required., • Minimum of 10 years of experience managing large government contracts and multi-disciplinary teams, preferably in the environmental or engineering sectors., • Prior experience managing EPA Region 6 clients and working with state and local agencies in EPA Region 6., • Proficiency in Microsoft Office Suite, especially Microsoft Project for project scheduling and management., • Must have either a Project Management Professional (PMP) certification, Professional Geologist (PG) certification, or Professional Engineer (PE) certification., • Strong leadership and people management abilities, including mentoring and coaching staff., • Excellent communication skills, both verbal and written, to interact effectively with clients, team members, and executives., • Strong problem-solving and decision-making skills with the ability to manage complex situations and personalities., • Highly organized with the ability to manage multiple competing priorities., • Strategic thinker with the ability to see the big picture while focusing on project details. Desired Qualifications WHAT YOU NEED TO STAND OUT – Preferred, not required • Project Management Processional (PMP) certification a strong plus., • Experience using Ganttic or other resource management tools is a plus., • Microsoft software, including but not limited to Microsoft Project. Physical & Environmental Requirements PHYSICAL & COGNITIVE REQUIRMENTS • Analyzing and synthesizing data; Complex problem solving and decision making; Reading and interpreting technical documents or regulations; Writing reports, proposals, or technical documentation; Leading a team or coordinating multiple priorities; Communicating effectively with clients, team members, and stakeholders; Managing competing deadlines and shifting priorities WORK ENVIRONMENT REQUIREMENTS • Office and remote work environment; Must be able to travel up to 10% per year; May work in environments with loud noises, dust, or hazardous materials This description is not a comprehensive listing of activities, duties or responsibilities that may be required of the employee. Other duties, responsibilities and activities may be assigned or may be changed at any time with or without notice. Details Work Schedule: HGL office work is dictated by a 5-day work week; however, fieldwork schedules will deviate based on job requirements and may require longer hours and weekends. Office Type: Remote but candidate should reside within EPA Region 6 (Arkansas, Louisiana, New Mexico, Oklahoma, or Texas). Travel: 10% A favorable pre-hire drug test is required. All positions are subject to a pre-hire education and driving record verification. This specific role supports a U.S. Federal government contract which requires employees engaged on this contract to be U.S. citizens. MORE ABOUT HGL AND THE OPPORTUNITY At HGL, we share a drive and vision to restore natural resources and provide ongoing stewardship of our environmental to benefit present and future generations. We believe that we can make a difference in improving the world we live in through collaboration, teamwork, and a positive work environment. This unites and empowers us to strive for excellence in all our endeavors. HGL - WHO WE ARE The exceptional quality of our people is key to our strength. We value our employees as individuals and as important members of our team. We offer a work environment that is flexible, inclusive, and dedicated to creating a sustainable future. By cultivating a culture of innovation, we’re able to adapt and augment our services to solve complex environmental and natural resources challenges. Projects at HGL primarily span the United States and its territories, tackling problems associated with emerging contaminants (like PFAS), radiological contamination, and military munitions, along with chemical contamination in groundwater, surface water, sediments, and soil. With over 550 employees, HGL is large enough to execute high-profile projects, but small enough to develop personal working environments with our talented team members. By joining HGL, you will be working toward restoring the environment and protecting our future. HGL - WE INVEST IN YOU It’s not just a job, it’s your career. HGL provides career growth opportunities via mentoring, training, education, and support for your certifications and licenses. Achieve your career goals and help HGL achieve its mission of restoring the environment to beneficial use for our clients and communities. We are an Equal Opportunity employer. All applicants will receive consideration for employment without regard to race, color, religion, sex, age, national origin, disability, protected veteran status, or other protected category. Some positions may require U.S. citizenship. Applicants who wish to request a reasonable accommodation during the recruitment process should contact Human Resources directly at 703-478-5186. EEO notices: US Equal Opportunity Employment Poster, US Equal Opportunity Supplemental Poster, Know Your Rights, and Pay Transparency Notice. A full list of benefits is available at . The annual salary for this position ranges from $121,620 - $194,592. This position's final salary can be impacted by various factors including, but not limited to, contractual requirements, geographic location, job-related education, training, experience, and skills. If your desired salary falls outside of this range, we hope you'll still apply as there may be other positions that better align. #LI-Remote

Job Description Job Title: Environmental Program Manager I Location: EPA Region 6 (Arkansas, Louisiana, New Mexico, Oklahoma, or Texas) or Overland Park, KS Description/Job Summary POSITION DESCRIPTION The Program Manager I is responsible for supporting the EPA Director and CLIN 2 Program Manager in the leading and managing of the company’s Environmental Protection Agency (EPA) contracts within EPA Region 6 and other regions and ensuring all projects are executed in alignment with client expectations, contractual requirements, and company objectives. This role oversees EPA-related projects and project teams, provides strategic leadership, supports business development efforts within the EPA Region 6 portfolio, and serves as a primary point of contact for Region 6 client engagement. The Program Manager I also plays a key role in mentoring and developing staff, including project managers, to ensure consistent and successful project delivery. The Program Manager I has the potential to work fully remotely with occasional travel to project sites and HGL offices. If a candidate resides within commuting distance of an HGL office and would like to work hybrid, that option is also available to them. Preference is for candidates who reside within EPA Region 6 (Arkansas, Louisiana, New Mexico, Oklahoma, and Texas). Responsibilities/Duties WHAT YOU'LL BE DOING Staff Management: • Support HGL’s EPA program and direct all EPA-related contracts and CLIN (Contract Line-Item Number) project managers within region 6., • Support a team of staff, including formal employee mentorship to provide guidance and professional development., • Communicate and connect with various departments (proposal development, contracts, chemistry, data management, etc.) to ensure that they are properly coordinating and functioning to support the region. Project Oversight and Delivery: • Ensure EPA Region 6 projects are delivered on time, within budget, and in compliance with project scope of work and contract requirements and client expectations., • Conduct routine meetings with project managers to monitor project progress, review deliverables, and provide strategic direction., • Guide and enforce company best practices for consistent EPA project execution across teams., • Address and resolve project issues and challenges., • Serve as a Senior Project Manager on some Region 6 Task Orders., • Uphold contract and company required QA/QC and Health and Safety standards. Client and Stakeholder Engagement: • Serve as liaison with EPA Region 6 clients, fostering strong relationships to ensure satisfaction and repeat business., • Coordinate with external stakeholders for scope and cost sensitive items including EPA clients and state and local agencies as needed for specific projects., • Respond to client inquiries and proactively address client needs to maintain high levels of satisfaction. Proposal and Business Development: • Support, organize and lead proposal efforts for EPA-related opportunities, working closely with technical teams, HGL leadership, and teaming partners to submit high-quality and competitive proposals., • Assist in growing the company’s Region 6 EPA portfolio, identifying new opportunities, and contributing to long-term client engagement strategies., • Evaluate potential project opportunities for profitability and alignment with company goals., • Support planning for and attendance of client sponsored Industry Day events and conferences. Process Improvement and Standardization: • Contribute to the development and refinement of internal guidelines and processes for program and project management to ensure consistency across teams., • Mentor project managers on best practices and standardized approaches to ensure high-quality service delivery. Minimum Requirements WHAT YOU NEED TO BE SUCCESSFUL • Bachelor’s degree in Science, Environmental Science, Engineering, or related field required., • Minimum of 15 years of experience including 5 years managing large government contracts and multi-disciplinary teams, preferably in the environmental or engineering sectors., • Prior experience managing EPA Region 6 clients and working with state and local agencies in EPA Region 6., • Proficiency in Microsoft Office Suite, especially Microsoft Project for project scheduling and management., • Strong leadership and people management abilities, including mentoring and coaching staff., • Excellent communication skills, both verbal and written, to interact effectively with clients and team members., • Strong problem-solving and decision-making skills., • Highly organized with the ability to manage multiple competing priorities., • Strategic thinker with the ability to see the big picture while focusing on project details. Desired Qualifications WHAT YOU NEED TO STAND OUT – Preferred, not required • Project Management Professional (PMP) certification, Professional Geologist (PG) certification, or Professional Engineer (PE) certification a strong plus., • Experience using Ganttic or other resource management tools is a plus. Physical & Environmental Requirements PHYSICAL & COGNITIVE REQUIRMENTS • Prolonged sitting up to 70% of the time; Ability to interpret and analyze visual data (maps, graphs, warning indicators, etc.), • Analyzing and synthesizing data; Complex problem solving and decision making; Reading and interpreting technical documents or regulations; Writing reports, proposals, or technical documentation; Leading a team or coordinating multiple priorities; Communicating effectively with clients, team members, and stakeholders; Managing competing deadlines and shifting priorities WORK ENVIRONMENT REQUIREMENTS • Office and remote work environment; Must be able to travel up to 10% per year; May work in environments with loud noises, dust, or hazardous materials This description is not a comprehensive listing of activities, duties or responsibilities that may be required of the employee. Other duties, responsibilities and activities may be assigned or may be changed at any time with or without notice. Details Work Schedule: HGL office work is dictated by a 5-day work week; however, fieldwork schedules will deviate based on job requirements and may require longer hours and weekends. Office Type: Remote but candidate should reside within EPA Region 6 (Arkansas, Louisiana, New Mexico, Oklahoma, or Texas). Candidates may also work hybrid if near Overland Park, KS office. Travel: 10% A favorable pre-hire drug test is required. All positions are subject to a pre-hire education and driving record verification. This specific role supports a U.S. Federal government contract which requires employees engaged on this contract to be U.S. citizens. MORE ABOUT HGL AND THE OPPORTUNITY At HGL, we share a drive and vision to restore natural resources and provide ongoing stewardship of our environmental to benefit present and future generations. We believe that we can make a difference in improving the world we live in through collaboration, teamwork, and a positive work environment. This unites and empowers us to strive for excellence in all our endeavors. HGL - WHO WE ARE The exceptional quality of our people is key to our strength. We value our employees as individuals and as important members of our team. We offer a work environment that is flexible, inclusive, and dedicated to creating a sustainable future. By cultivating a culture of innovation, we’re able to adapt and augment our services to solve complex environmental and natural resources challenges. Projects at HGL primarily span the United States and its territories, tackling problems associated with emerging contaminants (like PFAS), radiological contamination, and military munitions, along with chemical contamination in groundwater, surface water, sediments, and soil. With over 550 employees, HGL is large enough to execute high-profile projects, but small enough to develop personal working environments with our talented team members. By joining HGL, you will be working toward restoring the environment and protecting our future. HGL - WE INVEST IN YOU It’s not just a job, it’s your career. HGL provides career growth opportunities via mentoring, training, education, and support for your certifications and licenses. Achieve your career goals and help HGL achieve its mission of restoring the environment to beneficial use for our clients and communities. We are an Equal Opportunity employer. All applicants will receive consideration for employment without regard to race, color, religion, sex, age, national origin, disability, protected veteran status, or other protected category. Some positions may require U.S. citizenship. Applicants who wish to request a reasonable accommodation during the recruitment process should contact Human Resources directly at 703-478-5186. EEO notices: US Equal Opportunity Employment Poster, US Equal Opportunity Supplemental Poster, Know Your Rights, and Pay Transparency Notice. A full list of benefits is available at . The annual salary for this position ranges from $107,830 - $167,137. This position's final salary can be impacted by various factors including, but not limited to, contractual requirements, geographic location, job-related education, training, experience, and skills. If your desired salary falls outside of this range, we hope you'll still apply as there may be other positions that better align. #LI-Remote