Offres close protection à Tacoma, WashingtonCréer des alertes d'emploi

Job DescriptionDescription: Red Dot Corporation, the leading producer of premium mobile HVAC units and components for heavy-duty commercial and military vehicles, is recruiting for the following position: Components Engineer II Full-Time, Fully On-site, Exempt position Summary Description: The Components Engineer will support the Components Engineering group by serving as the design-responsible engineer for electrical, electronic, and electromechanical components used in Mobile and Off-road HVAC products. This position is responsible for the selection, specification, design integration, validation support, and lifecycle management of components including (but not limited to) electronic actuators, water valves, switches, sensors, and other electrical/electronic HVAC components. The role requires cross-functional coordination with design engineering, manufacturing, quality, supply chain, and external suppliers to ensure components meet performance, reliability, cost, and manufacturability requirements. Job Duties and Responsibilities (Essential Functions): • Serve as the design-responsible engineer for electromechanical and electronic HVAC components including:, • Electronic actuators, • Water valves (electrically actuated), • Switches and operator controls, • Sensors, connectors, and related electrical/electronic components, • Define component requirements and specifications including functional, electrical, environmental, reliability, and packaging requirements., • Lead component selection and supplier evaluation efforts; develop and maintain approved component lists where applicable., • Develop and maintain engineering documentation including component specifications, drawings, test requirements, and change records., • Support system integration by working with mechanical design and electrical harness teams to ensure proper packaging, interfaces, routing, sealing, mounting, and serviceability., • Participate in design reviews and ensure component designs meet applicable standards and internal design guidelines., • Support component validation activities including:, • Test planning and coordination, • Bench testing and functional verification, • Environmental and durability testing support (temperature, vibration, moisture, corrosion, etc.), • Root cause investigation and corrective action for test or field failures, • Drive continuous improvement initiatives related to component cost reduction, quality improvement, and reliability enhancement., • Control complexity of the assigned components by right-sizing the released and validated catalog of parts., • Support prototype builds and troubleshooting in lab and manufacturing settings as needed., • Lead and/or support engineering change activities (ECR/ECO/ECN) for component-related updates, including impact assessment across product lines., • Coordinate with purchasing and supply chain to address component availability, obsolescence, alternate sourcing, and supplier performance issues., • Provide technical support for manufacturing and quality issues related to component installation, test, and field service concerns. Requirements: Required Qualifications: • Bachelor’s degree in Mechatronics Engineering, Electrical Engineering, Mechanical Engineering, or related discipline., • Minimum 5 years of experience working with electrical/electronic and electromechanical components in a product development environment., • Experience with component-level requirements definition and validation., • Demonstrated working knowledge of electromechanical systems including motors/actuators, gears, solenoids, switches, sensors, and wiring/connectors., • Ability to work independently as a design-responsible engineer and manage multiple active projects., • Strong analytical and problem-solving skills with experience in root cause analysis and corrective actions., • Strong written and verbal communication skills. ITAR / Export Control Requirement: This position involves access to information and/or technology subject to the International Traffic in Arms Regulations (ITAR). As a result, only U.S. Persons as defined by ITAR (U.S. citizens, U.S. lawful permanent residents, or individuals granted refugee or asylee status) are eligible for this position. Employment eligibility will be verified in accordance with federal law. The Company participates in E-Verify. Preferred Qualifications: • Experience in HVAC systems, thermal systems, or Mobile and Off-road equipment., • Familiarity with automotive or heavy equipment electrical architecture and component qualification expectations., • Experience with environmental qualification testing (vibration, thermal cycling, ingress protection, corrosion)., • Experience with DFMEA/PFMEA, DVP&R, and structured product development processes., • Experience with embedded electronics integration (basic understanding of control logic, feedback devices, PWM/analog signals, etc.)., • Experience supporting supplier design reviews and managing supplier technical deliverables., • Familiarity with applicable standards (e.g., IP ratings, ISO/SAE/IEC standards relevant to electrical components)., • Experience with multiphysics 1D simulation software – in particular control algorithm development. Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job: • While performing the duties of this job, the employee is regularly required to talk and/or hear. The employee is frequently required to sit, stand; walk; use hands to finger, handle or feel; and reach with hands and arms. Must have the ability to sit or stand at computer for extended periods of time, • The employee is occasionally required to climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus., • Sufficient manual dexterity and motor control to use common drafting implements and calculators., • Ability to work in both office and manufacturing/lab environments., • Ability to support prototype builds and testing activities, including occasional hands-on troubleshooting. Red Dot Corporation offers the following total compensation package for this role: • Personal Time Off (PTO), • Average of 14 paid holidays per year., • Employer sponsored PPO Medical Plans, with employer subsidized premiums of at least 70% for non-tobacco users., • Employer sponsored PPO Dental Plans dental, with employer subsidized premiums of at least 70% for non-tobacco users., • Employer sponsored Vision Plans., • Free Employee Assistance Program to all employees., • Free Benefit Advocate access for insurance benefit inquiries., • 401(k) employer contribution of 3% of annual salary*, regardless of participation., • 100% ESOP Company, with vesting beginning after 1,000 hours., • Employer Paid Basic Life and Accidental Death and Dismemberment (AD&D) premiums., • Employer Paid Long Term Disability Insurance premiums., • Employer Paid Washington State FML payroll taxes. Min: $90,000/annual Mid: $100,000/annual Max: $110,000/annual *Subject to all local, state and federal regulatory limits ** Salary grade levels and placement are all based on a number of factors, including but not limited to: applicable experience, education, skill set, market. Red Dot is an Equal Opportunity/Affirmative Action Employer.

At Safe Haven Security, we are more than just a home security company! We are a team of dedicated professionals who are passionate about making a difference in the lives of our customers and our employees. Our mission is to provide peace of mind and protection to families across the country, and we achieve this by offering cutting-edge security solutions and exceptional customer service. Safe Haven Security is currently seeking an Outside Sales Representative to join our outside sales team. This position will work within an assigned territory working directly with prospective customers on site. In this role you will: • Operate within a designated territory to engage with qualified leads and prospective customers., • Conduct in-home sales presentations to educate customers while developing customized security and automated alarm systems based on their needs, • Leverage sales tools to drive productivity and an efficient sales process, • Represent Safe Haven Security with professionalism and integrity, while adhering to company policies and values To be successful in this role, you should have: • Ability to demonstrate high level communication skills, • Strong problem-solving skills and ability to overcome objections and close sales, • Self-motivated with a results-oriented mindset, • Demonstrate accountability and enthusiasm for achieving financial goals, • Ability to work independently with minimal supervision What Safe Haven requires in a candidate: • High School diploma or equivalent, • Valid driver's license, auto insurance, and reliable transportation Compensation Structure:, • Uncapped comission only - paid weekly, • Top performers earn a range of $70,000 to $125,000., • Average compensation payout is $426 per package, with an average of 9 installs per month., • Additional sales bonuses range from $750 to $2,000 per month. Physical Abilities: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions: About Safe Haven At Safe Haven Security LLC, we are more than just a home security company. We are a team of dedicated professionals who are passionate about making a difference in the lives of our customers and our employees. Our mission is to provide peace of mind and protection to families across the country, and we achieve this by offering cutting-edge security solutions and exceptional customer service. When you join Safe Haven Security LLC, you become part of a dynamic and innovative organization that is committed to excellence. We believe in investing in our employees and providing them with the tools and resources they need to succeed. We offer comprehensive training programs, ongoing support, and opportunities for growth and advancement. At Safe Haven Security LLC, we foster a culture of teamwork, collaboration, and mutual respect. We believe that our employees are our greatest asset, and we strive to create a positive and inclusive work environment where everyone feels valued and appreciated. As a company, we are dedicated to staying at the forefront of the industry, constantly evolving and adapting to meet the changing needs of our customers. We embrace innovation and technology, and we are always looking for talented individuals who share our passion for excellence. If you are looking for a rewarding career in the home security industry, Safe Haven Security LLC is the place for you. Safe Haven has won several awards including being one of "America's Greatest Places to work" from Newsweek and is the 6-time winner of Inc. Magazine's America's Fastest-Growing Private companies. Join our team and be part of an organization that is committed to making a difference and creating a safe and secure environment for every home we serve. Safe Haven Security is an Equal Opportunity Employer / Veterans / Disabled. We celebrate diversity and are committed to creating an inclusive environment for all employees. Why Join Safe Haven • Weekly pay, fully commissioned role with uncapped earning potential, • Monthly bonuses, incentives, and paid vacations, • Paid Time Off (PTO) program and paid holidays, • Medical, Dental, Vision, 401k, and Life Insurance Coverage, • Employee Assistance Program (EAP), • Career Development, • Recognized by Newsweek's "America's Greatest Workplaces"!, • Safe Haven is the largest employee-based ADT Authorized Dealer

Want to build a brighter, bolder future and cultivate your career? Join Ecolab’s team and help create a world in which we all thrive. Our Pest Elimination team proudly serves our communities and customers by safeguarding public health, food safety and property from the damaging effects of pests. Focused exclusively on commercial pest solutions, we deliver science-based expertise and cutting-edge innovation to solve the industry’s most complex pest challenges. By partnering with our customers in these markets, you can be part of a team that helps protect facilities, employees, and brands at a time when it’s more important than ever. Ecolab is seeking a Pest Control Technician Trainee to join our team in Tacoma, WA. As a Pest Control Technician Trainee, you’ll be at the forefront of protecting public health and commercial businesses by delivering science-based pest elimination solutions. Through our industry-leading training program, you’ll gain the skills and certifications needed to build a long-term career in service, sales, or management. This is your opportunity to grow your career while helping others thrive. How You’ll Make an Impact: * Participate in a 5-week paid training program to learn pest detection, elimination, and prevention techniques * Establish effective working relationships with a variety of commercial customers, including those in the hospitality and foodservice industries * Partner with customers on best practices to identify and solve pest elimination needs * Maintain expertise in Ecolab’s product and service offerings to enhance service and sales * Use handheld computerized equipment to document structural, sanitation, and pest issues * Deliver timely, cost-effective, and high-quality service under close supervision * Obtain required pest control licensing and/or certification as mandated by state/local law Position Details: * Location: Tacoma, WA * Work Week & Shift: Day Shift; Monday - Friday, 9am - 5pm * Travel Requirement: Training in Eagan, MN for 1 week during training period (You are responsible to have the proper documentation to fly, such as a Real ID or other acceptable form of identification) What’s Unique About This Role: * Work independently in a flexible, field-based environment * Help protect customer brands and public health through science-based solutions Minimum Qualifications: * High school diploma or equivalent * Two years of work or military experience * Position requires a current and valid Driver’s License with no restrictions * Availability to work overnight shifts and be on call during off-hours and weekends as needed * Due to the nature and hours of the work, must be 18 years of age or older * Position requires obtaining pest certification and/or business licensing pursuant to state/local law * Ecolab conducts a background check on all candidates who receive a job offer * Due to federal contract requirements, this position requires a drug test including THC for all candidates who receive a job offer * Immigration sponsorship is not available for this role Physical Requirements of Position: * Lifting, pushing, pulling, and carrying up to 50 pounds chest high * Wearing and using a respirator * Working in a variety of conditions including confined spaces, damp/dusty areas, and extreme temperatures * Climbing ladders and performing physical tasks such as stooping, kneeling, crouching, reaching, and standing for extended periods * Driving a company vehicle as required (ongoing motor vehicle record checks will be performed) Ecolab is committed to providing reasonable accommodation to qualified individuals with a disability. Preferred Qualifications * Previous customer service experience * Experience selling value-added products to existing customers * Previous pest elimination industry or route experience preferred What’s in it for you: * Starting on Day 1: Access to our comprehensive benefits package including medical, dental, vision, matching 401K, company-paid pension, stock purchase plan, paid parental leave, select discounted childcare resources, and more! * The opportunity to take on some of the world’s most meaningful challenges, helping customers achieve clean water, safe food, and healthy environments * The ability to make an impact and shape your career with a company that is passionate about growth * The support of an organization that believes it is vital to include and engage diverse people, perspectives, and ideas to achieve our best About Ecolab: At Ecolab, we prioritize our talent-first philosophy by creating the most capable and diverse team to excel at our nearly three million customer sites. Building on a century of innovation, our 48,000 associates help deliver comprehensive science-based solutions, data-driven insights and world-class service to advance food safety, maintain clean and safe environments, and optimize water and energy use, and improve operational efficiencies and sustainability for customers in the food, healthcare, life sciences, hospitality and industrial markets in more than 170 countries around the world. Our solutions not only enhance operational efficiency but also contribute to sustainability and public health, making a positive impact on the world. We are committed to eliminating unnecessary complexities and embracing a beginner's mindset, continuously seeking new perspectives and innovative solutions to stay ahead in a rapidly changing world. Annual or Hourly Compensation Range: 53,600.00 - 66,900.00 - 80,300.00 USD Annual Many factors are taken into consideration when determining compensation, such as experience, education, training, geography, etc. We comply with all minimum wage and overtime laws. Benefits Ecolab provides the following benefits: medical, dental, vision, life insurance, accident insurance, critical illness insurance, hospital indemnity insurance, auto insurance, home insurance, pet insurance, identity theft protection, short-term and long-term disability, 401k, pension plans, retirement health care benefits, short-term incentives, vacation (12 days), holidays, parental leave, employee stock purchase plans (Full-Time Associates), discount on day care services and caregiver services, adoption assistance, group legal services, employee assistance program, employee discount program, and education assistance program, on-Site childcare and fitness facilities may be available at select Ecolab locations. ___ for additional benefits information. If you are viewing this posting on a site other than our Ecolab Career website, view our benefits at ___. Potential Customer Requirements Notice To meet customer requirements and comply with local or state regulations, applicants for certain customer-facing roles may need to: • Undergo additional background screens and/or drug/alcohol testing for customer credentialing., • Be fully vaccinated for COVID-19, including a booster if eligible, unless a religious or medical accommodation is requested by the applicant and approved by Ecolab. Americans with Disabilities Act (ADA) Ecolab will provide reasonable accommodation (such as a qualified sign language interpreter or other personal assistance) with our application process upon request as required to comply with applicable laws. If you have a disability and require accommodation assistance in this application process, please visit the Recruiting Support link in the footer of each page of our career website. Our Commitment to a Culture of Inclusion & Belonging At Ecolab, we believe the best teams are inclusive. We are on a journey to create a workplace where every associate can grow and achieve their best. We are committed to fair and equal treatment of associates and applicants and recruit, hire, promote, transfer and provide opportunities for advancement based on individual qualifications and job performance. In all matters affecting employment, compensation, benefits, working conditions, and opportunities for advancement, we will not discriminate against any associate or applicant for employment because of race, religion, color, creed, national origin, citizenship status, sex, sexual orientation, gender identity and expressions, genetic information, marital status, age, disability, or status as a covered veteran. In addition, we are committed to furthering the principles of Equal Employment Opportunity (EEO) through Affirmative Action (AA). We will consider for employment all qualified applicants, including those with criminal histories, in a manner consistent with the requirements of applicable state and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York City Fair Chance Act.

If you are a current associate, you will need to apply through our internal career site. Please log into Workday and click on the Jobs Hub app or search for Browse Jobs. SUMMARY OF JOB PURPOSE AND FUNCTION The Client Service Coordinator ("CSC") drives the flow of clients and pets through the hospital, maximizes the productivity of the veterinary medical team (in terms of numbers of clients and pets), ensures good communication with associates and clients, and coordinates the care of clients and pets in a happy, welcoming, friendly and efficient manner, influencing clients to return and refer their friends and families. Description - External ESSENTIAL RESPONSIBILITIES AND TASKS * Live and exemplify the Five Principles of Mars, Inc. within self and team. * Actively recruit new clients by promoting hospital services and route the flow of clients and pets to ensure superior client care and maximum productivity of the veterinary medical team. * Maximize the number of pets seen by the hospital team through through a productive and efficiently run hospital to support the needs of our wellness plan clients. * Provide professional, efficient and exceptional service at all times. This includes encouraging hospital visits, welcoming clients and pets, ensuring that they are comfortable in the hospital, and educating them about their pet's health. * Educate clients about Optimum Wellness Plans, preventative care, pet health needs and hospital services * Assist incoming clients by completing the required documentation, entering all pet information and history in the computer, utilizing proper collars and tags for identification, and ensuring prompt service. * Assist outgoing clients by providing all necessary instructions, information and invoices, dispensing prescription items per the veterinarian's instructions, selling retail products and scheduling future appointments. * Manage the finances by maintaining accurate balances and utilizing proper opening and closing procedures. * Conduct administrative functions as necessary. * Other job duties as assigned. THE FIVE PRINCIPLES * Quality - The consumer is our boss, quality is our work and value for money is our goal. * Responsibility - As individuals, we demand total responsibility from ourselves; as associates, we support the responsibility of others. * Mutuality - A mutual benefit is a shared benefit; a shared benefit will endure. * Efficiency - We use resources to the full, waste nothing and do only what we can do best. * Freedom - We need freedom to shape our future; we need profit to remain free. HIRING QUALIFICATIONS / COMPETENCIES Leadership - Customer Focus - Peer Relationships - Integrity & Trust CAPABILITIES AND EXPERIENCE (CAN DO) * Ability to multi-task- Manages multiple tasks at one time; quickly and accurately shifts attention among multiple tasks under distracting conditions without loss of accuracy or appearance of frustration. * Communication skills - Reads, writes and speaks fluent English, using appropriate grammar, style and vocabulary. Correctly spells commonly used English words and job specific terms. Demonstrates exceptionally strong written and verbal communication skills. * Organizational ability - Demonstrates a systematic approach in carrying out assignments. Is very orderly and excels at cutting through confusion and turning chaos into order. * Problem solving skills - Demonstrates a strong ability to identify, analyze and solve problems. Translates problems into practical solutions. * Client service skills - Consistently ensures the team provides the client with attentive, courteous and informative service. Gains and shows personal satisfaction from delivering great service. * Intellectual ability - Accurately and consistently follows instructions delivered in an oral, written or diagram format. Can provide directions. * Mathematical ability - Ability to add, subtract, multiply and divide, and to compute rate, ratio and percent; ability to convert units of measurement. * Computer skills - Comfortably and confidently uses a computer and specialized software. Microsoft Word, Excel, Access, Outlook, etc. ATTITUDES (WILL DO) * Initiative - shows willingness and aptitude to use own discretion in taking appropriate steps in finding solutions to problems; presents options and ideas to enhance current processes or procedures. Takes on additional responsibility when both big and small tasks need to be done. * Integrity - Firmly adheres to the values and ethics of Banfield Pet Hospitals. Exhibits honesty, discretion, and sound judgment. * Cooperativeness - Willing to work with others, collaborating and compromising where necessary; promptly share relevant information with others. * Flexibility - Is open to changing situations and opportunities and is willing to perform all tasks assigned. * Independence - Able and willing to perform tasks and duties without supervision. * Tolerance for Stress / Resiliency - Maintains a positive "can do" outlook, rebounds quickly from frustrations and unpleasantness, and maintains composure and friendly demeanor while dealing with stressful situations. SPECIAL WORKING CONDITIONS * Ability to work at a computer for long periods of time. * Ability to be confident around pets (i.e., dogs, cats, birds, reptiles, etc.) * Client needs and work volume may often require more than 40 hours per week to complete essential duties of this job. This position requires special hours including working weekends and evenings. * Must have mental processes for reasoning, remembering, mathematics and language ability (reading, writing, and speaking the English language) to perform the duties proficiently. * The noise level in the work environment is moderately high. * Requires sufficient ambulatory skills in order to perform duties while at hospital. * Ability to stand, walk, stoop, kneel, crouch, and climb as well as manipulate (lift, carry, move) up to 50 pounds. * Requires good hand-eye coordination, arm-hand-finger dexterity with the ability to grasp, and visual acuity to use a keyboard and operate equipment. * Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. * Associate is routinely exposed to a variety of pets that may bite or scratch, and on occasion, exposed to anesthesia, radiation, biological hazards and medication/controlled substances. EXPERIENCE, EDUCATION AND/OR TRAINING * High School Diploma or equivalent preferred. * Must be at least 18 years old to perform duties involving radiography (x-ray) and exposure to radioactive substances. * One year related experience required with customer service preferred. * Medical background (veterinary technician, human healthcare, pharmaceutical, etc.) with medical terminology training is preferred. WE ARE A DRUG-FREE, SMOKE-FREE, EQUAL OPPORTUNITY EMPLOYER. Banfield Pet Hospital strongly supports and values the uniqueness of all individuals and promotes a work environment where diversity is embraced. Banfield Pet Hospital is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, genetic information, status as a protected veteran, or status as a qualified individual with disability. Banfield Pet Hospital complies with all applicable federal, state and local laws governing nondiscrimination in employment in every Banfield location. The pay range for this role is $17.70 - $22.62 Hourly The pay range listed reflects a general hiring range for the area , with the specific rate determined based on the candidate's experience, skill level, and education, and may vary depending on location or applicable minimum wage laws. Here at Banfield, w e prioritize your well-being and professional growth by offering a comprehensive total rewards package, including health, wellness, and financial support for you, your family, and even your pets. Check out s ome of o ur " M eow-velous" benefits: * Comprehensive Medical, Dental, and Vision Insurance: Enjoy peace of mind knowing your health and wellness are our top priorities. We've got your essential medical, dental, and vision care covered . * Generous Retirement Plans (401(k) and Roth): Invest in your future and enjoy a generous company match to help you build a secure financial future.* * Best-in-Class Student Debt Relief Program (for Full-Time DVMs): At Banfield, we understand the significant financial burden of student debt on veterinarians. We are committed to supporting our veterinary professionals and believe that addressing student debt is crucial for the long-term health of the veterinary profession. * Paid Time Off and Holidays: Take a break , recharge your wellbeing , and celebrate days of personal significance with paid time off and holidays. * * Top-Tier Mental Health and Wellbeing Resources: Your mental health matters. Access our industry-leading resources, including free coaching and counseling sessions, to support your overall wellbeing and help you thrive.* * Associate Life Insurance (company-paid) & Supplemental Life Insurance: Protect your loved ones with our company-paid Associate life insurance and have the option to purchase additional coverage for extra peace of mind. * Company-Paid Short- and Long-Term Disability: Feel secure knowing that if you face a temporary or long-term disability, you'll have financial protection . * Flexible Spending Accounts (FSA): Save on healthcare and dependent care expenses by setting aside pre-tax money. It's a smart way to manage your budget and take care of your needs. * Health Savings Account (HSA): Make the most of your healthcare dollars with a tax-advantaged HSA, allowing you to pay for medical expenses with pre-tax funds. * Paid Parental Leave: We support growing families with paid parental leave for both birth and adoption, giving you precious time to bond with your new family addition. * Continuing Education Allowance (for Eligible Positions): Banfield is committed to supporting the professional growth of our Associates. This allowance provides financial assistance to pursue continuing education opportunities.* * Back-Up Child and Elder Care & Family Support Resources : When life's unpredictable moments arise, our backup care and family support benefits provide the help you need to keep things running smoothly.* * Fertility and Family Building Support: We're here for you on your journey to parenthood, offering comprehensive support for fertility treatments and family-building options. * Digital Exercise Therapy: Stay active and healthy with our digital exercise therapy program, designed to fit your busy lifestyle, and keep you moving. * Voluntary Protection Benefits: Get peace of mind with protection against the unexpected. You can purchase coverage to help support you financially during hospital stays, critical illness, and accidents.* * Legal Plan: Gain extra peace of mind with our affordable and accessible legal plan which includes coverage for a wide range of legal needs.* * Identity Protection: Identity Protection helps safeguard your personal information by alerting you to suspicious activity and providing support if your information is stolen.* * Commuter Benefits: Say goodbye to commuting stress with our commuter benefits, making your daily journey more convenient and cost-effective.* * Three Free Optimum Wellness Plans for Pets: We care about your furry friends too! Enjoy three free wellness plans to ensure your pets receive the best preventive and general care.* * Exclusive Discounts: Unlock a world of savings with our wide variety of exclusive discounts on products and services, making life more affordable and enjoyable. * Benefits eligibility is based on employment status. Full-time (FT) Associates are eligible for all benefit programs (Student Debt Program available for FT DVMs only); Part-time Associates are eligible for those benefits with an asterisk (*).

Job Description Job Unit: Production Position: Non-Exempt Salary: Hourly Summary Description: Responsible for starting and operating all machines and equipment applicable to the production line. The operator will ensure the appropriate materials are pulled from inventory and prepared for assembly and all product is within quality standard compliance. Essential Duties • Obtain work orders and production schedule, • Pull new material (foam, steel coil), • Assemble materials accordingly, • Operate pit area equipment including roll formers, glue machines, and steel press, • Preform forklift duties applicable to material/production change overs, • Assemble foam and glued steel sheets into a section, • Perform quality assurance inspection Education/experience: Any combination of education providing the required skill and knowledge for successful performance would be qualifying. Typical qualifications would be: • High School Diploma or GED., • One year of transferrable experience preferred, but not required, • Must be able to read a tape measure accurately, • Ability to work independently and with a team, • Ability to drive a forklift, • Ability to lift up to 50 lbs. without assistance and more than 50 lbs. using a team-lift, • Ability to stand for extended periods of time, • Good hand-eye coordination This position involves standing, walking and lifting for long periods of time throughout the day. It requires grasping and fine finger manipulation on both hands. The position requires stooping, kneeling, crouching and crawling. It requires grasping and fine manipulation on both hands. The plant is not climate controlled. Noise levels can become high. NWD provides and requires hearing protection in the department. The work is done in an area where moving mechanical machinery, parts or vibration are located. Specific vision requirements: This position requires close vision, distance vision, color vision, peripheral vision, depth vision s. and the ability to adjust focus. Machines & Equipment Used: Tape measure, mandrel, hydraulic press, wood grain mill, film rolls, roll former, conveyor belts, hand tools, automated equipment, computer The above information on this description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory or all duties, responsibilities, and qualifications required of employees assigned to this level. Who we are: Hörmann is a premier manufacturer of steel, aluminum and custom wood garage doors. We provide the building industry with high quality, innovative garage doors at competitive prices while maintaining a reputation of quality, reliability and integrity. We offer a team-centered environment, where each member’s unique knowledge, skills, abilities, and efforts define our success as a company. Hörmann is an Equal Opportunity Employer with a diverse employment environment. Hörmann is a drug-free workplace. A pre-employment drug test must be negative regardless of whether you live, test or plan to work in an area that permits legalized use of marijuana for either medical or recreational purposes. All offers of employment will be contingent on successfully passing a criminal background check and a pre-employment drug test. Job type: Full-time Pay: $21.00-$26.20 Benefits: • 401(k), • 401(k) matching, • Dental Insurance, • Health Insurance, • Health Savings Account, • Life Insurance, • Paid time off, • Tuition reimbursement, • Vision Insurance Schedule: • 2nd Shift, • Monday to Thursday

Job DescriptionBenefits: • Dental insurance, • Health insurance, • Paid time off, • Competitive salary, • Free uniforms, • Opportunity for advancement, • Training & development Our Ideal candidate is someone who is looking for a long-term position and to grow with our company. Job responsibilities include, but are not limited to: Service all CertaPro Painters customers with the objective of meeting their painting needs and building customers for life. Schedule and mange multiple projects and crews at one time. Develop a close working relationship with the Sales Associates and the Office Associate to ensure all expectations set forth with the customers are met and best executed. Develop a recruiting, development, and retention program for the Job Site Supervisors as well as properly onboarding them to setting them up for production success. Ensure that all field programs and systems are being executed. Responsible for providing ongoing training and inspections related to safety, as well as conducting safety meetings. Responsible for ensuring that all crews are following Occupational Safety and Health Administration (OSHA) guidelines, Environmental Protection Agency (EPA) guidelines around Lead Safety and possess and maintain the required Material Safety Data Sheets (MSDS) Core hours are 7:30 AM to 4:30 PM. Coverage days to be discussed and agreed on. Saturday coverage availability during peak season (April through October) required. Off-shift (evenings, nights) hours may be required for project management purposes. Qualifications • Experience in scheduling, • Knowledge of paint and/or painting experience is preferred, • Hands on construction trade experience a plus, • Valid drivers license and reliable transportation, • Self-motivation and ability to work efficiently without direction, • Basic computer and technology skills, • Not afraid to confront challenges head on, • A great eye for detail, • PTO, • Paid Holidays, • Health care package, • Cell phone and computer provided by CertaPro, • Paid training and travel when necessaryWe are a Tacoma based painting contractor looking for our next team member. Our Culture Continuous improvement is one of our core values and we work hard to enrich the lives of our employees and customers. Challenges are faced head-on, and we accept responsibility. We deliver what we promise, respect the individual, have pride in what we do and embrace possibilities! Our History CertaPro Painters of Tacoma is a locally owned franchise business that was started in 2014. We complete interior and exterior residential painting in Pierce and Kitsap counties. We pride ourselves on being a great employer as well as a customer-driven, quality painting company.

Job DescriptionEvergreen Fire & Security is seeking a hands-on Accounting Manager to safeguard the financial integrity of a growing, multi-state organization—partnering with leadership to strengthen controls, improve processes, and support long-term growth. Who We Are Evergreen Fire & Security (EFS) is a recognized leader in the life safety and security solutions industry. We are entrusted by the Federal Government and commercial customers to protect lives, critical infrastructure, and information by providing and maintaining technically advanced and innovative fire alarm, access control, intrusion detection, CCTV, mass notification, and other critical protection systems.The Key to Our Success Our success is largely driven by the experience, skills, and expertise of the best and brightest employees in the industry. Due to continued growth, we are seeking a qualified Accounting Manager to join the Evergreen team and play a key role in supporting our operations and leadership. Think you have what it takes? Great! We welcome you to submit your qualifications for this Evergreen Fire & Security career opportunity.The Opportunity This Accounting Manager opportunity is ideal for an experienced accounting professional who enjoys leading day-to-day accounting operations, mentoring a team, and partnering with leadership in a fast-paced, project-based, multi-state environment with billable labor and cost accounting considerations. The Responsibilities • Oversee and manage monthly, quarterly, and year-end close processes, • Ensure accurate general ledger maintenance, journal entries, accruals, and reconciliations, • Prepare and review financial statements and internal management reports, • Ensure compliance with GAAP and company accounting policies, • Assist with annual budgeting and periodic forecasting, • Analyze variances and provide explanations and insights to leadership, • Support operational leaders with financial insights related to projects, service contracts, billable hours, labor utilization, and cost controls, • Monitor and analyze labor costs, project margins, and cost drivers to support profitability, • Maintain documentation and proper retention of financial records, • Partner with leadership to improve accounting systems, workflows, and reporting, • Support ERP, payroll, and accounting software optimization, • Identify opportunities to streamline and scale accounting processes, • Ensure compliance with multi-state tax, payroll, and regulatory requirements, • Perform other related duties as assignedSupervisory Responsibilities Supervise and support accounting staff (AP, AR, payroll, or staff accountants, as applicable) * Provide training, guidance, and performance feedback to direct reports * Promote consistency, accuracy, and accountability within the accounting team * Oversee AP and AR processes to ensure timely payments and collections * Review aging reports and partner with operations to resolve discrepancies * Coordinate payroll processing and ensure accurate payroll-related entries * Maintain strong internal controls and support continuous process improvement * Assist with audits, tax filings, and external reporting requirements The Necessities • Bachelor’s degree in Accounting, Finance, or a related field, • 5+ years of progressive accounting experience, • Experience with month-end close and financial statement preparation, • Experience with cost accounting, including analysis of labor, overhead, and project or service-related costs, • Experience working in environments with billable hours, labor tracking, or service-based revenue models, • Proficiency with accounting and payroll systems (ERP experience preferred; Acumatica a plus), • Advanced Excel skillsGreat to Have, • 2+ years in a supervisory or managerial role, • Strong knowledge of GAAP and financial reporting, • Experience supporting project-based, field services organizations, or labor-driven organizations, • Experience in a multi-state operating environment, • Prior experience improving or scaling accounting processesEmployee Benefits Competitive pay * Paid Time Off (PTO) * Paid holidays * Medical, dental, and vision insurance plans * 401(k) plan * Up to 4% match available * 100% vested from day one * Healthcare flexible spending accounts * Dependent care flexible spending accounts * Employee Assistance Program (EAP) * Company-sponsored group term life insurance * Corporate perks program • Opportunities to participate in voluntary benefits such as pet insurance, voluntary life insurance, disability insurance, long-term care, hospital indemnity insurance, critical illness insurance, legal services, identity theft protection, and accident insuranceSalary Range: $95,000 to $110,000 We also offer opportunities for training and advancement in a fast-paced, inclusive, and rewarding working environment. Check us out on Facebook, LinkedIn, or at . Evergreen Fire & Security is a U.S. government contractor with sensitive access requirements. As an employee, you must be able to satisfy federal government requirements for access to government information. Unless otherwise stated in the requirements section of an individual job listing, U.S. citizenship may be required due to the level of access to sensitive information and/or restricted facilities. Evergreen Fire & Security is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, Powered by JazzHR z6Z0G5kNgb

Job Description Department: Production Position: Non-Exempt Salary: Hourly Summary Description This position uses the router to cut holes into the sections. Essential Duties • Read and interpret work orders/blueprints, • Check inventory and locate needed section, • Inserts parts into routing machine, • Unpack the sections, • Check sections for quality and size, • Using the motorized router, cut holes for the glass inserts., • Remove the metal cut outs, • Place routed out section on a cart for the Glazier to assemble Education/experience: Any combination of education providing the required skill and knowledge for successful performance would be qualifying. Typical qualifications would be: • High School Diploma or GED preferred, • Must be able to read a tape measure accurately, • Ability to work independently and with a team, • Ability to lift up to 50 lbs without assistance and more than 50 lbs using a team-lift, • Ability to stand for extended periods of time This position involves standing, walking and lifting for long periods of time throughout the day. It requires grasping and fine finger manipulation on both hands. The position requires stooping, kneeling, crouching and crawling. The plant is not climate controlled. Noise levels can become high. NWD provides and requires hearing protection in the department. The work is done in an area where moving mechanical machinery, parts or vibration are located. Specific vision requirements: This position requires close vision, distance vision, color vision, peripheral vision, depth vision and the ability to adjust focus. Machines & Equipment Used: Tape measure, router, tin snips, hand tools and computer The above information on this description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory or all duties, responsibilities, and qualifications required of employees assigned to this level. Who we are: Hörmann is a premier manufacturer of steel, aluminum and custom wood garage doors. We provide the building industry with high quality, innovative garage doors at competitive prices while maintaining a reputation of quality, reliability and integrity. We offer a team-centered environment, where each member’s unique knowledge, skills, abilities, and efforts define our success as a company. Hörmann is an Equal Opportunity Employer with a diverse employment environment. Hörmann is a drug-free workplace. A pre-employment drug test must be negative regardless of whether you live, test or plan to work iin an area that permits legalized use of marijuana for either medical or recreational purposes. All offers of employment will be contingent on successfully passing a criminal background check and a pre-employment drug test. Job type: Full-time Pay: $19.00-$23.58 Benefits: • 401(k), • 401(k) matching, • Dental Insurance, • Health Insurance, • Health Savings Account, • Life Insurance, • Paid time off, • Tuition reimbursement, • 2nd Shift, • Monday to Friday

Job Description Department: Production Position: Non-Exempt Salary: Hourly Summary Description: Prepare aluminum rails for assembly. Cut and drill aluminum rails for assembly according to production schedule. May be required to perform functions of other jobs within the department. Essential Duties: • Obtain work orders and production schedule and chose raw materials accordingly, • Perform quality assurance inspection to assure raw materials meet established standards, • Drill holes according to work order using the drill machine, • Inspect rail for accuracy, • Change the drill, blades or tape coil if needed, • Apply product and identification labels, • Scrap material and place it in the dumpster Education/experience: Any combination of education providing the required skill and knowledge for successful performance would be qualifying. Typical qualifications would be: • High School Diploma or GED preferred, • Must be able to read a tape measure, • Ability to work independent and with a team, • Ability to lift up to 50 lbs. without assistance and more than 50lbs using a team-lift, • Ability to stand for extended periods of time, • Good hand-eye coordination This position involves standing, walking and lifting for long periods of time throughout the day. It requires grasping and fine manipulation on both hands. The plant is not climate controlled. Noise levels can become high. NWD provides and requires hearing protection in the department. The work is done in an area where moving mechanical machinery, parts or vibration are located. Specific vision requirements: This position requires close vision, distance vision, color vision, peripheral vision, depth vision and the ability to adjust focus. Machines & Equipment Used: Tape measure, chop saw and drill The above information on this description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory or all duties, responsibilities, and qualifications required of employees assigned to this level. Who we are: Hörmann is a premier manufacturer of steel, aluminum and custom wood garage doors. We provide the building industry with high quality, innovative garage doors at competitive prices while maintaining a reputation of quality, reliability and integrity. We offer a team-centered environment, where each member’s unique knowledge, skills, abilities, and efforts define our success as a company. Hörmann is an Equal Opportunity Employer with a diverse employment environment. Hörmann is a drug-free workplace. A pre-employment drug test must be negative regardless of whether you live, test or plan to work in an area that permits legalized use of marijuana for either medical or recreational purposes. All offers of employment will be contingent on successfully passing a criminal background check and a pre-employment drug test. Job type: Full-time Pay: $20.00 - $25.15 Benefits: • 401(k), • 401(k) matching, • Dental Insurance, • Health Insurance, • Health Savings Account, • Life Insurance, • Paid time off, • Tuition reimbursement, • 2nd Shift, • Monday to Thursday

Job Description EXPEDITOR Department: Warehouse Position: Non-Exempt Salary: Hourly Summary Description This position supports the warehouse by identifying, collecting and sorting product for customer orders and prepare them for shipping. May pull orders from inventory, deliver production material and supplies, or stage finished product. Essential Duties • Retrieve Customer orders and locate products and communicate locations with team members, • Pull reports as needed from computer system and close out orders when complete, • Follow established standard operation procedures, • Sort and stack product accurately by type and size, • Daily housekeeping of inventory racks and staging areas, • Load and unload product manually, • Follow established safety procedures, • Package product as needed Education/Experience: • High school diploma or GED., • No previous experience required but previous warehouse work experience is preferred, • Must be able to read a tape measure accurately, • Good oral and written communication skills, • Ability to work independently and with a team, • Ability to multi-task, • Ability to lift up to 50 lbs without assistance and more than 50 lbs using a team-lift, • Ability to stand for extended periods of time This position involves standing, walking and lifting for long periods of time throughout the day. It requires grasping and fine finger manipulation on both hands. The position requires stooping, kneeling, crouching and crawling. It requires grasping and fine manipulation on both hands. The plant is not climate controlled. Noise levels can become high. NWD provides and requires hearing protection in the department. The work is done in an area where moving mechanical machinery, parts or vibration are located. Specific vision requirements: This position requires close vision, distance vision, color vision, peripheral vision, depth vision and the ability to adjust focus. Machines & Equipment Used: Computer, printer, ladder, forklift, pallet jack The above information on this description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory or all duties, responsibilities, and qualifications required of employees assigned to this level. Who we are: Hörmann is a premier manufacturer of steel, aluminum and custom wood garage doors. We provide the building industry with high quality, innovative garage doors at competitive prices while maintaining a reputation of quality, reliability and integrity. We offer a team-centered environment, where each member’s unique knowledge, skills, abilities, and efforts define our success as a company. Hörmann is an Equal Opportunity Employer with a diverse employment environment. Hörmann is a drug-free workplace. A pre-employment drug test must be negative regardless of whether you live, test or plan to work iin an area that permits legalized use of marijuana for either medical or recreational purposes. All offers of employment will be contingent on successfully passing a criminal background check and a pre-employment drug test. Job type: Full-time Pay: $18.50 - $22.52/hr Benefits: • 401(k), • 401(k) matching, • Dental Insurance, • Health Insurance, • Health Savings Account, • Life Insurance, • Paid time off, • Tuition reimbursement, • 2nd Shift, • Monday to Friday

Job Description Department: Warehouse Position: Non-Exempt Compensation: Hourly Summary Description: This position supports the warehouse by identifying, collecting and sorting product for customer orders and prepare them for shipping. May pull orders from inventory, deliver production material and supplies, or stage finished product. Essential Duties: • Retrieve Customer orders and locate products and communicate locations with team members, • Pull reports as needed from computer system and close out orders when complete, • Follow established standard operation procedures, • Sort and stack product accurately by type and size, • Daily housekeeping of inventory racks and staging areas, • Load and unload product manually, • Follow established safety procedures, • Package product as needed Education/Experience: • High school diploma or GED., • No previous experience required but previous warehouse work experience is preferred, • Must be able to read a tape measure accurately, • Good oral and written communication skills, • Ability to work independently and with a team, • Ability to multi-task, • Ability to lift up to 50lbs without assistance and more than 50lbs using a team-lift, • Ability to stand for extended periods of time This position involves standing, walking and lifting for long periods of time throughout the day. It requires grasping and fine finger manipulation on both hands. The position requires stooping, kneeling, crouching and crawling. It requires grasping and fine manipulation on both hands. The plant is not climate controlled. Noise levels can become high. NWD provides and requires hearing protection in the department. The work is done in an area where moving mechanical machinery, parts or vibration are located. Specific vision requirements: This position requires close vision, distance vision, color vision, peripheral vision, depth vision and the ability to adjust focus. Machines & Equipment Used: Computer, printer, ladder, forklift, pallet jack The above information on this description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory or all duties, responsibilities, and qualifications required of employees assigned to this level. Who we are: Hörmann is a premier manufacturer of steel, aluminum and custom wood garage doors. We provide the building industry with high quality, innovative garage doors at competitive prices while maintaining a reputation of quality, reliability and integrity. We offer a team-centered environment, where each member’s unique knowledge, skills, abilities, and efforts define our success as a company. Hörmann is an Equal Opportunity Employer with a diverse employment environment. Hörmann is a drug-free workplace. A pre-employment drug test must be negative regardless of whether you live, test or plan to work iin an area that permits legalized use of marijuana for either medical or recreational purposes. All offers of employment will be contingent on successfully passing a criminal background check and a pre-employment drug test. Job type: Full-time Pay: $18.50 - $22.50 Benefits: • 401(k), • 401(k) matching, • Dental Insurance, • Health Insurance, • Health Savings Account, • Life Insurance, • Paid time off, • Tuition reimbursement, • Day Shift, • Monday to Friday

Job Description Frontier Door and Cabinet is a premier provider of interior and exterior door products and high-quality cabinets for the commercial construction industry. With over 28 years of experience, we are the leader in commercial and multi-family residential doors, cabinets, and hardware. Our commitment to excellence, transparency, integrity, and respect guides everything we do. We offer a supportive work environment where personal growth and continuous improvement are encouraged. Join us in our mission to deliver top-notch products and customer service from concept to completion. POSITION SUMMARY The Machine Operator will operate machines in the production of cabinets or doors and millwork from raw materials to finished product. This is done by the configuration of equipment, loading the machines, all the while meeting the production demands. This role will need to work the assigned shift, including any mandatory overtime. SHIFT • Monday-Friday., • 1:30 p.m. - 10:00 p.m., • Feed material through machines or “catch” material and stack them accordingly using rollers., • Follow instructions from more experienced employees to operate machines, hold or supply materials and tools, and load and unload items from machines and assembly lines., • Keep manufacturing areas free of debris., • Use of hand tools, power tools, staple gun, glue gun throughout the workday., • Set out or put away tools to keep area neat for safety., • Locate parts, tag them with identifying text and numbers, and record information such as gauge readings, products produced and manufacturing times., • Assist with quality control by reporting defective products or equipment malfunctions to higher-level employees, and if necessary, assist with any fixes., • Follow all safety requirements., • Maintain regular and reliable attendance, arrive on time for scheduled shifts, and adhere to the company’s attendance policies and procedures., • High School diploma or GED., • Minimum 3-6 months related experience and/or training., • Basic mathematics., • Proficiency in reading a tape measure., • Utilize situational awareness in detecting any deviation in the functioning of the machine., • Ability to understand read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals., • Ensuring that safety is always top priority while working. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Standing approximately 8-10 hours, 5 days a week, depending on business need, may be required to work 6 days/week depending on business need., • Fine motor abilities are needed to handle or feel objects, tools, or controls., • Specific vision abilities might be required by this job that include close vision, particularly reading that may be very fine print., • Regular twisting, bending, squatting, pushing, pivoting, and moving or lifting 10-15 pounds., • Employees will frequently lift and/or move 10-25 pounds while occasionally lift and/or move up to 50 pounds., • Exposure to moving mechanical equipment., • Exposed to vibration from machines., • Noise level is loud and ear protection is available., • Employees may be exposed to hazardous chemicals in the workplace.

Job Description Department: Production Position: Non-Exempt Salary: Hourly Summary Description: Catch and paint springs for garage doors as they come from the oven cooling conveyer in a safe and efficient manner. Cone the springs with a large drill motor and coning holder. Palletize the finished springs. Essential Duties: • Catch and paint the springs as they come off the oven cooling conveyer in a safe and efficient manner, • Cut springs with cutting torch to needed length, • Check the quality and length of the springs, • Cone the springs with a large drill motor and coning holder palletize the finished springs, • Band the completed finished springs to the pallet., • Label the springs, • Close out the work orders via the computer as required., • Produce the springs at or above the set labor standards. Education/experience: Any combination of education providing the required skill and knowledge for successful performance would be qualifying. Typical qualifications would be: • High School Diploma or GED preferred, • Must be able to read a tape measure accurately, • Ability to work independently and with a team, • Ability to lift up to 50 lbs. without assistance and more than 50 lbs. using a team-lift, • Ability to stand for extended periods of time, • Ability to use a cutting torch, • Good hand-eye coordination Physical Environment/Working Conditions: This position involves standing, walking and lifting for long periods of time throughout the day. It requires grasping and fine manipulation on both hands. The plant is not climate controlled. Noise levels can become high. NWD provides and requires hearing protection in the department. The work is done in an area where moving mechanical machinery, parts or vibration are located. Specific vision requirements: This position requires close vision, distance vision, color vision, peripheral vision, depth vision and the ability to adjust focus. Machines & Equipment Used: Tape Measure, micrometer, drills, cutting torch, coning holder and assorted hand tools The above information on this description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory or all duties, responsibilities, and qualifications required of employees assigned to this level. Who we are: Hörmann is a premier manufacturer of steel, aluminum and custom wood garage doors. We provide the building industry with high quality, innovative garage doors at competitive prices while maintaining a reputation of quality, reliability and integrity. We offer a team-centered environment, where each member’s unique knowledge, skills, abilities, and efforts define our success as a company. Hörmann is an Equal Opportunity Employer with a diverse employment environment. Hörmann is a drug-free workplace. A pre-employment drug test must be negative regardless of whether you live, test or plan to work in an area that permits legalized use of marijuana for either medical or recreational purposes. All offers of employment will be contingent on successfully passing a criminal background check and a pre-employment drug test. Job type: Full-time Pay: $19.00 - $23.58 Benefits: • 401(k), • 401(k) matching, • Dental Insurance, • Health Insurance, • Health Savings Account, • Life Insurance, • Paid time off, • Tuition reimbursement, • 2nd Shift, • Monday to Friday

Job Description Department: Warehouse Position: Non-Exempt Compensation: Hourly Summary Description: This position supports the warehouse by identifying, collecting and sorting product for customer orders and prepare them for shipping as well as reviewing product that needs to be located and researched as to why it is being dispatched. May pull orders from inventory, deliver production material and supplies, or stage finished product. Essential Duties: • Retrieve Customer orders and locate products and communicate locations with team members, • Pull reports as needed from computer system and close out orders when complete, • Follow established standard operation procedures, • Sort and stack product accurately by type and size, • Daily housekeeping of inventory racks and staging areas, • Load and unload product manually, • Follow established safety procedures, • Package product as needed Education/Experience: • High school diploma or GED., • No previous experience required but previous warehouse work experience is preferred, • Must be able to read a tape measure accurately, • Good oral and written communication skills, • Ability to work independently and with a team, • Ability to multi-task, • Ability to lift up to 50lbs without assistance and more than 50lbs using a team-lift, • Ability to stand for extended periods of time This position involves standing, walking and lifting for long periods of time throughout the day. It requires grasping and fine finger manipulation on both hands. The position requires stooping, kneeling, crouching and crawling. It requires grasping and fine manipulation on both hands. The plant is not climate controlled. Noise levels can become high. NWD provides and requires hearing protection in the department. The work is done in an area where moving mechanical machinery, parts or vibration are located. Specific vision requirements: This position requires close vision, distance vision, color vision, peripheral vision, depth vision and the ability to adjust focus. Machines & Equipment Used: Computer, printer, ladder, forklift, pallet jack The above information on this description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory or all duties, responsibilities, and qualifications required of employees assigned to this level. Who we are: Hörmann is a premier manufacturer of steel, aluminum and custom wood garage doors. We provide the building industry with high quality, innovative garage doors at competitive prices while maintaining a reputation of quality, reliability and integrity. We offer a team-centered environment, where each member’s unique knowledge, skills, abilities, and efforts define our success as a company. Hörmann is an Equal Opportunity Employer with a diverse employment environment. Hörmann is a drug-free workplace. A pre-employment drug test must be negative regardless of whether you live, test or plan to work iin an area that permits legalized use of marijuana for either medical or recreational purposes. All offers of employment will be contingent on successfully passing a criminal background check and a pre-employment drug test. Job type: Full-time Pay: $18.05 - $22.52 Benefits: • 401(k), • 401(k) matching, • Dental Insurance, • Health Insurance, • Health Savings Account, • Life Insurance, • Paid time off, • Tuition reimbursement, • Day Shift, • Monday to Friday

Job DescriptionSalary: $34.00 - $38.00/hour Job Summary Cowlitz Clean Sweep (CCS) a Pacific Northern Environmental LLC division, is seeking a Foreman who thrives in a fast-paced, team environment with the ability to provide exceptional service and skills to our company, clients, and employees. Pacific Northern Environmental, LLC consists of five divisions including Advanced Electrical Technologies (AET), Taurus Power and Controls (Taurus), Cowlitz Clean Sweep (CCS), Pacific Northern Environmental Construction (PNEC), and WasteXpress Environmental (WXE). Together, we specialize in commercial and petroleum construction, industrial and commercial electrical, industrial cleaning, and hazardous waste disposal. PNE LLC is a multi-state organization with operating offices in Washington, Oregon, Idaho, and Hawaii. In addition, we carry out projects across the United States. CCS provides industrial cleaning and spill response to almost every pulp and paper mill in the Pacific Northwest. We also service major oil companies and a wide range of manufacturing and industrial clients. CCS has demonstrated its ability to complete large and complex industrial cleaning challenges on schedule, within budget, and in compliance with the most stringent industrial health & safety programs. No industrial cleaning job is too large or too small for CCS. The Foreman is responsible for assisting the Department Manager in pre-field duties, communicating with customers, completing daily project paperwork and assisting on-site teams. Education and Experience Qualifications • High School Diploma or GED, • Valid Drivers License required and ability to be insured under the companys driving insurance plan., • Must be 18 years or older., • 3-5 years of successful experience in field management and managing projects as well as managing health and safety for mobile workforce., • Experience in bulk disposal and hazardous waste handling., • 2-3 years of experience in confined space entry and rescue preferred., • 1-year minimum supervisory experience, • Strong interpersonal, organizational, analytical, decision-making, and problem-solving skills required., • Ability to manage projects within budget while continually identifying opportunities to improve efficiency and profitability., • Comfortable interfacing with clients to maintain, grow, and strengthen business relationships. Duties and Responsibilities The Foreman possessing the education and experience listed above performs the following: • Coordinating work according to priorities and plans., • Safely operate and maintain company vehicles as required for job duties, ensuring compliance with all traffic laws and company policies, • Must maintain the ability drive company vehicles., • Producing scheduled and monitor attendance of crew., • Allocating general and daily responsibilities., • Guarantee all safety precautions and quality standards are met., • Monitor expenditure and projects to ensure the remain within budget., • Resolve conflicts or miscommunications quickly and amicably when they arise., • Assist department manager in duties, such as but not limited to scheduling, estimates and bidding, daily safety and customer paperwork, complete and submit change orders, team management, safety, inventory etc., • Provide exceptional professionalism and customer service., • Other duties as assigned. Working Conditions and Physical Requirements The candidate must possess and be adaptable to the following physical abilities and working conditions: • Work in outdoor weather conditions., • Willing to get dirty and be in wet conditions at times., • Frequently moving hoses and other work-related equipment up to 50lbs for various needs., • Observe details at close range., • Communicate information and ideas so others will understand. Must be able to exchange accurate information., • Ascend/descend ladders, stairs, scaffolding and/or platforms., • Travel up to 25%, some overnight travel may be required, • Work in environments where there may be exposure to potentially hazardous conditions, including chemicals, fumes, hazardous substances., • Perform duties in an industrial environment where consistently high noise levels are present., • Perform tasks that may involve working in confined spaces such as tanks, tunnels, or enclosed structures, as well as at elevated heights using ladders, platforms, or scaffolding., • Required to meet facial hair standards in accordance with OSHAs Respiratory Protection standard (29 CFR 1910.34)., • Must be able to successfully complete and maintain a valid DOT physical examination, including baseline and annual/periodic recertification, as required for the role., • Must be able to successfully complete baseline and annual/periodic audiometric testing as a condition of employment., • Ability to wear required personal protective equipment (PPE), including respiratory protection, and successfully complete respirator fit testing. Employee Benefit Program Pacific Northern Environmental, LLC presently provides coverage for: • Medical, Dental & Vision options with low premiums for employees and eligible dependents, • Life AD&D - Voluntary and Company paid., • Specialty RX programs., • Group AFLAC options Hospital, Critical, Accident and short-term Disability Plans, • Pre-Tax Flexible Savings Account (FSA), • Pre-Tax Dependent Care Savings Account (DCSA), • Telehealth by Teladoc., • 401(k) with discretionary annual company matching contributions., • Employee Assistance Program (EAP), • Paid Trainings and Certifications, • Paid Time Off, • Paid Holiday for qualifying employees, • Up to $2,000 per year profit sharing for qualifying employees, • Annual company events, • Safety Incentives Please apply directly Pacific Northern Environmental, LLC is an Equal Opportunity Employer. Employee must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodations will be made to enable employees with disabilities to perform the essential functions of their job, absent undue hardship. This job description is a general description of essential job functions. It is not intended as an employment contract, nor is it intended to describe all duties someone in this position may perform. All employees of Pacific Northern Environmental, LLC (PNE, LLC) are expected to perform tasks as assigned by PNE supervisory/management personnel, regardless of job title or routine job duties. This position has been determined as safety sensitive, as defined as a position wherein an accident could cause human life, serious bodily injury, or significant property or environmental damage and is therefore subject to pre-employment drug screening including that of THC. We are a Drug and Alcohol-Free Workplace. All new hires are subject to testing in accordance with local, federal, and state guidelines.

Job Description Department: Production Position: Non-Exempt Salary: Hourly Summary Description Read blueprints and apply proposed design to a flush garage door using appropriate tools. Inspect finished product to ensure design is built to exact specifications. Essential Duties • Pull sections according to work order, • Read and interpret blueprints/drawings, • Inspect section for defects, • Stack sections on assembly machine per work order, • Apply design material to a flush door using a finish Nailer, glue, and drills, • Inspect finished door design to ensure that it was built to workorder specifications, • Route sections for glazing, • Maintain stock, • High School Diploma or GED preferred, • High School Diploma or GED preferred, • Must be able to read a tape measure accurately, • Ability to work independently and with a team, • Ability to lift up to 50 lbs without assistance and more than 50 lbs using a team-lift, • Ability to stand for extended periods of time This position involves standing, walking and lifting for long periods of time throughout the day. It requires grasping and fine finger manipulation on both hands. The position requires stooping, kneeling, crouching and crawling. It requires grasping and fine manipulation on both hands. The plant is not climate controlled. Noise levels can become high. NWD provides and requires hearing protection in the department. The work is done in an area where moving mechanical machinery, parts or vibration are located. Specific vision requirements: This position requires close vision, distance vision, color vision, peripheral vision, depth vision and the ability to adjust focus. Machines & Equipment Used: Who we are: Hörmann is a premier manufacturer of steel, aluminum and custom wood garage doors. We provide the building industry with high quality, innovative garage doors at competitive prices while maintaining a reputation of quality, reliability and integrity. We offer a team-centered environment, where each member’s unique knowledge, skills, abilities, and efforts define our success as a company. Hörmann is an Equal Opportunity Employer with a diverse employment environment. Hörmann is a drug-free workplace. A pre-employment drug test must be negative regardless of whether you live, test or plan to work iin an area that permits legalized use of marijuana for either medical or recreational purposes. All offers of employment will be contingent on successfully passing a criminal background check and a pre-employment drug test. Job type: Full-time Pay: $18.00 - $20.42/hr. Benefits: • 401(k), • 401(k) matching, • Dental Insurance, • Health Insurance, • Health Savings Account, • Life Insurance, • Paid time off, • Tuition reimbursement, • Day Shift, • Monday to Friday

Job Description Job Unit: Warehouse Position: Non-Exempt Salary: Hourly Summary Description: This position is responsible for teaming with the expeditor, shipping, and production teams to review product that needs to be located and researched as to why it is dispatched. Essential Duties: • Research and determine the root cause for items that can’t be found. Work with departments where items are manufactured and stored/pulled for loads, • Escalates damaged items to the warehouse supervisor and enters rejections when applicable, • Preforms root cause analysis for missing items, • Corrects quantity discrepancies with inventory control department, • Works closely with production and customer service to determine when missing sections are going to be produced and coordinate between departments to ensure items make shipment dates, • Communicates daily quantity discrepancies as it pertains to customer’s loads via email to multiple departments, • Attends daily Back Order briefing Education/experience: Any combination of education providing the required skill and knowledge for successful performance would be qualifying. Typical qualifications would be: • High School Diploma or GED preferred, • A minimum of 1-year experience in inventory control preferred, • Develop a working knowledge and skill set that centers around our Frontier system, • Ability to foster a collaborative work environment, • Intermediate knowledge in Microsoft Office Suite, • knowledge of inventory procedures in a manufacturing environment, • Mathematical skills, • Excellent attention to detail, • Ability to work independent and with a team, • Excellent oral and written communication skills, • Able to stand for extended periods of time (8-to-10-hour shifts), • Good hand-eye coordination, • Ability to become a certified Power Industrial Truck operator This position involves standing, walking and lifting for long periods of time throughout the day. It requires grasping and fine finger manipulation on both hands. The position requires stooping, kneeling, crouching and crawling. The plant is not climate controlled. Noise levels can become high. NWD provides and requires hearing protection in the department. The work is done in an area where moving mechanical machinery, parts or vibration are located. Specific vision requirements: This position requires close vision, distance vision, color vision, peripheral vision, depth vision and the ability to adjust focus. Machines & Equipment Used: Computer, Printer, Power Industrial Truck The above information on this description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory or all duties, responsibilities, and qualifications required of employees assigned to this level. Who we are: Hörmann is a premier manufacturer of steel, aluminum and custom wood garage doors. We provide the building industry with high quality, innovative garage doors at competitive prices while maintaining a reputation of quality, reliability and integrity. We offer a team-centered environment, where each member’s unique knowledge, skills, abilities, and efforts define our success as a company. Hörmann is an Equal Opportunity Employer with a diverse employment environment. Hörmann is a drug-free workplace. A pre-employment drug test must be negative regardless of whether you live, test or plan to work in an area that permits legalized use of marijuana for either medical or recreational purposes. All offers of employment will be contingent on successfully passing a criminal background check and a pre-employment drug test. Job type: Full-time Pay: $20.00 - $24.00 per hour Benefits: • 401(k), • 401(k) matching, • Dental Insurance, • Health Insurance, • Health Savings Account, • Life Insurance, • Paid time off, • Tuition reimbursement, • Day Shift, • Monday to Friday

Job Description Department: Production Position: Non-Exempt Salary: Hourly Summary Description Running Parts for Track Assembly. Essential Duties • Obtain work orders and production schedule and choose raw materials accordingly, • Perform quality assurance inspection to assure raw materials meet established standard, • Inspect track for accuracy, • Apply product and identification labels, • Adjust tooling to specific setting for multiple types of product and perform tool changes as needed., • Load and unload coil using the crane., • Down stacking finished parts into bundles for proper storage. Education/experience: Any combination of education providing the required skill and knowledge for successful performance would be qualifying. Typical qualifications would be: • High School Diploma or GED preferred, • Must be able to read a tape measure accurately, • Ability to work independently and with a team, • Ability to lift up to 50 lbs without assistance and more than 50 lbs using a team-lift, • Ability to stand for extended periods of time, • Good hand-eye coordination, • Skill in using power and/or hand tools This position involves standing, walking and lifting for long periods of time throughout the day. It requires grasping and fine finger manipulation on both hands. The position requires stooping, kneeling, crouching and crawling. It requires grasping and fine manipulation on both hands. The plant is not climate controlled. Noise levels can become high. NWD provides and requires hearing protection in the department. The work is done in an area where moving mechanical machinery, parts or vibration are located. Specific vision requirements: This position requires close vision, distance vision, color vision, peripheral vision, depth vision and the ability to adjust focus. Equipment Used: Tape measure, chop saw, drill press, band saw, cut down press, overhead crane, angle grinder and calipers The above information on this description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory or all duties, responsibilities, and qualifications required of employees assigned to this level. Who we are: Hörmann is a premier manufacturer of steel, aluminum and custom wood garage doors. We provide the building industry with high quality, innovative garage doors at competitive prices while maintaining a reputation of quality, reliability and integrity. We offer a team-centered environment, where each member’s unique knowledge, skills, abilities, and efforts define our success as a company. Hörmann is an Equal Opportunity Employer with a diverse employment environment. Hörmann is a drug-free workplace. A pre-employment drug test must be negative regardless of whether you live, test or plan to work in an area that permits legalized use of marijuana for either medical or recreational purposes. All offers of employment will be contingent on successfully passing a criminal background check and a pre-employment drug test. Job type: Full-time Pay: $21.00 - $26.20 Benefits: • 401(k), • 401(k) matching, • Dental Insurance, • Health Insurance, • Health Savings Account, • Life Insurance, • Paid time off, • Tuition reimbursement, • Vision Insurance Schedule: • 2nd Shift, • Monday to Thursday

Job Description Join Our Team at True North Group Position: Experienced Outside Sales Trainer Number of Openings: 1 Territory Representative Position Available The Role At True North Group, we believe great leaders don't just close sales they build people. We're looking for an experienced trainer who is passionate about developing others, leading by example in the field, and helping new sales representatives find their footing. If you find fulfillment in seeing others succeed and want to play a key role in shaping a growing team, this opportunity is built for you. What You'll Be Doing: * Supporting new agents with ride-alongs, field training, and hands-on guidance * Providing practical coaching that builds confidence and consistency * Encouraging a positive, team-focused culture rooted in growth * Balancing personal production with training and mentorship responsibilities * Providing business to business demonstrations for our supplemental insurance products What You'll Get: * Competitive uncapped commission, weekly draw pay, and performance incentives and bonuses * Ongoing leadership development and mentorship from senior leaders * A clear path for advancement in agency leadership * Recognition events, retreats, and incentive travel opportunities * The chance to make a lasting impact on both clients and teammates What We're Looking For: * Experience in sales, with a background in training or leadership preferred * Strong communicator who enjoys coaching and motivating others * Team-oriented mindset with a focus on collective success * Reliable, organized, and willing to lead in the field * Licensed (or willing to obtain) in life & health insurance, we will support you in obtaining licensure, and reimburse you after Why This Matters Families rely on us for protection during some of life's most difficult moments. By training and supporting new sales professionals, you help extend that protection to more people while shaping the next generation of leaders. Apply now at:

Job Description Department: Production Position: 500 Line - Assembler Salary: Hourly Summary Description Insert foam and packing sections. Essential Duties • Lift and organize sections, • Interpret and print orders, • Cut insulation/foam, • Insert foam in endcaps/sections, • Packing, banding and labeling the sections, • Down stack finished product to pallets or carts, • Maintain a clean and safe working area Education/experience: Any combination of education providing the required skill and knowledge for successful performance would be qualifying. Typical qualifications would be: • High School Diploma or GED., • Must be able to read a tape measure accurately, • Ability to work independently and with a team, • Ability to lift up to 50 lbs without assistance and more than 50 lbs using a team-lift, • Ability to stand for extended periods of time, • Good hand-eye coordination, • Ability to use a computer, keyboard and related software This position involves standing, walking and lifting for long periods of time throughout the day. It requires grasping and fine finger manipulation on both hands. The position requires stooping, kneeling, crouching and crawling. The plant is not climate controlled. Noise levels can become high. NWD provides and requires hearing protection in the department. The work is done in an area where moving mechanical machinery, parts or vibration are located. Specific vision requirements: This position requires close vision, distance vision, color vision, peripheral vision, depth vision and the ability to adjust focus. Machines & Equipment Used: Tape measure, glue/caulk gun, hand tools and line bander The above information on this description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory or all duties, responsibilities, and qualifications required of employees assigned to this level. Who we are: Hörmann is a premier manufacturer of steel, aluminum and custom wood garage doors. We provide the building industry with high quality, innovative garage doors at competitive prices while maintaining a reputation of quality, reliability and integrity. We offer a team-centered environment, where each member’s unique knowledge, skills, abilities, and efforts define our success as a company. Hörmann is an Equal Opportunity Employer with a diverse employment environment. Hörmann is a drug-free workplace. A pre-employment drug test must be negative regardless of whether you live, test or plan to work iin an area that permits legalized use of marijuana for either medical or recreational purposes. All offers of employment will be contingent on successfully passing a criminal background check and a pre-employment drug test. Job type: Full-time Pay: $19.00 - $20.42 Benefits: • 401(k), • 401(k) matching, • Dental Insurance, • Health Insurance, • Health Savings Account, • Life Insurance, • Paid time off, • Tuition reimbursement, • 2nd Shift, • Monday to Friday

Job Description Department: Production - Spring Shop Position: Non-Exempt Salary: Hourly Summary Description: Catch and paint springs for garage doors as they come from the oven cooling conveyer in a safe and efficient manner. Cone the springs with a large drill motor and coning holder. Palletize the finished springs. Essential Duties: • Catch and paint the springs as they come off the oven cooling conveyer in a safe and efficient manner, • Cut springs with cutting torch to needed length, • Check the quality and length of the springs, • Cone the springs with a large drill motor and coning holder palletize the finished springs, • Band the completed finished springs to the pallet., • Label the springs, • Close out the work orders via the computer as required., • Produce the springs at or above the set labor standards. Education/experience: Any combination of education providing the required skill and knowledge for successful performance would be qualifying. Typical qualifications would be: • High School Diploma or GED preferred, • Must be able to read a tape measure accurately, • Ability to work independently and with a team, • Ability to lift up to 50 lbs without assistance and more than 50 lbs using a team-lift, • Ability to stand for extended periods of time, • Ability to use a cutting torch This position involves standing, walking and lifting for long periods of time throughout the day. It requires grasping and fine manipulation on both hands. The plant is not climate controlled. Noise levels can become high. NWD provides and requires hearing protection in the department. The work is done in an area where moving mechanical machinery, parts or vibration are located. Specific vision requirements: This position requires close vision, distance vision, color vision, peripheral vision, depth vision and the ability to adjust focus. Machines & Equipment Used: Tape Measure, micrometer, drills, cutting torch, coning holder and assorted hand tools The above information on this description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory or all duties, responsibilities, and qualifications required of employees assigned to this level. Who we are: Hörmann is a premier manufacturer of steel, aluminum and custom wood garage doors. We provide the building industry with high quality, innovative garage doors at competitive prices while maintaining a reputation of quality, reliability and integrity. We offer a team-centered environment, where each member’s unique knowledge, skills, abilities, and efforts define our success as a company. Hörmann is an Equal Opportunity Employer with a diverse employment environment. Hörmann is a drug-free workplace. A pre-employment drug test must be negative regardless of whether you live, test or plan to work in an area that permits legalized use of marijuana for either medical or recreational purposes. All offers of employment will be contingent on successfully passing a criminal background check and a pre-employment drug test. Job type: Full-time Pay: $18.50 - $22.52 Benefits: • 401(k), • 401(k) matching, • Dental Insurance, • Health Insurance, • Health Savings Account, • Life Insurance, • Paid time off, • Tuition reimbursement, • Day Shift / 2nd Shift, • Monday to Friday

Job Description Frontier Door and Cabinet is a premier provider of interior and exterior door products and high-quality cabinets for the commercial construction industry. With over 25 years of experience, we are the leader in commercial and multi-family residential doors, cabinets, and hardware. Our commitment to excellence, transparency, integrity, and respect guides everything we do. We offer a supportive work environment where personal growth and continuous improvement are encouraged. Join us in our mission to deliver top-notch products and customer service from concept to completion. We are seeking an experienced Door Shop Employee to join our production team in Tacoma, Washington. The ideal candidate has a minimum of 5 years of hands-on experience in a pre-hung door production facility and is proficient in operating various Norfield door machinery including Magnums, Strike Routers, Eagles, or equivalent equipment. Experience with Weeke Point-to-Point CNC machines and familiarity with Wood WOP software is highly desirable. Responsibilities: • Set up and operate door machining equipment (Norfield Magnums, Strike Routers, Eagles), • Accurately machine and assemble pre-hung door units weighing up to 120 lbs to precise specifications, • Maintain machinery, troubleshoot issues, and ensure smooth operations, • Monitor product quality and ensure adherence to company standards, • Collaborate effectively with the production team to meet daily output goals, • Assist with inventory management and maintain accurate records, • Perform quality control checks and address issues promptly, • Maintain cleanliness and organization of work area and machinery, • Read and interpret Bill of Materials (BOMs) and production paperwork, • Minimum 5 years of experience in a pre-hung door production environment, • Proficient with Norfield door machinery or similar equipment, • CNC machinery experience, specifically Weeke Point-to-Points, is a strong plus, • Familiarity with Wood WOP software advantageous, • Detail-oriented with excellent organizational skills, • Ability to work effectively both independently and in a team environment, • Reliable and punctual with a strong work ethic, • Ability to lift and move materials up to 120 pounds regularly, • Experience with inventory management and control processes, • Strong communication skills and ability to coordinate with other departments effectively, • Proficiency in the use of various hand tools, • Strong math skills and ability to perform precise measurements, • Proficiency in basic mathematics and the ability to read a tape measure accurately., • Demonstrated situational awareness in detecting any deviations in the functioning of the machinery., • Ability to understand, read, and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals., • Standing approximately 8-10 hours per day, 5 days a week, with the possibility of working 6 days a week based on business needs., • Fine motor abilities required to handle objects, tools, and controls., • Specific vision abilities, including close vision for reading fine print., • Regular bending, squatting, pushing, and lifting objects weighing up to 80 pounds on and off the machine, which can occur up to 100 times per shift., • Exposure to moving mechanical equipment and vibration from machinery., • Loud noise levels in the production area; ear protection provided., • Potential exposure to hazardous chemicals in the workplace., • Demonstrated situational awareness in detecting any deviations in the functioning of the machinery., • Ability to understand, read, and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.