Trabajos construction labor en Bayonne, New JerseyCrear alertas

Job Description Job Title: Heating and Air Conditioning (HVAC) Maintainer Location: Various Full/Part Time: Full-Time Regular/Temporary: Regular Job Information: Last Date of Filing: Until Filled Authority: New York City Transit (TA) Department: Subway Division/Unit: Infrastructure Reports to: Maintenance Supervisor Work Location: Various Hours of Work: Various *This is a civil service position. Selected candidates must pass a civil service exam and be appointed from the resulting list to gain permanent status. Compensation: Salary Range: The current minimum salary for Heating and Air Conditioning Maintainer is $37.16 per hour for a 40-hour week increasing to $43.72 per hour in the sixth year of service. These rates are subject to change. The benefits of this position include, but are not limited to, night and weekend salary differentials, paid holidays, vacation and sick leave, a comprehensive medical plan and a pension plan. Responsibilities: Heating and Air Conditioning Maintainers, under supervision, maintain, install, inspect, test, alter, and repair heating and air conditioning systems and equipment of MTA New York City Transit structures, such as shops, stations, and buildings. They work on air conditioners and components, such as compressors, condensers, evaporators, fans, motors, electrical and electronic controls and valves. They work on boilers, furnaces and components, such as boiler sections, heaters, radiators, piping, pumps, motors, and electrical and electronic controls and valves. They solder and braze, keep records, write reports, and perform related work. Some of the physical activities performed by Heating and Air Conditioning Maintainers and environmental conditions experienced are: loading and driving light utility trucks; lifting equipment weighing up to 75 pounds; lifting equipment overhead; climbing and descending ladders; working at heights of up to 50 feet; crouching to reach equipment being repaired; making visual inspections of equipment; distinguishing colored wiring; and reading blueprints and schematics. Special Working Conditions: Heating and Air Conditioning Maintainers may be required to work various shifts including nights, Saturdays, Sundays and holidays. Education and Experience Requirements: You must meet one the following requirements: 1. Successful completion of a four-year, full-time apprenticeship in the construction, repair and maintenance of air conditioning and/or heating systems recognized by the New York State Department of Labor, the U.S. Department of Labor; or any apprenticeship council that is recognized by the U.S. Department of Labor; or, 2. Three years of full-time satisfactory experience at the journey level (i.e., fully-trained, knowledgeable, proficient and competent mechanic) in the installation, repair, and maintenance of industrial, commercial, or domestic air conditioning units, or commercial refrigeration equipment, or heating systems in buildings, and the electrical controls and wiring for such equipment; or, 3. Two years of full-time satisfactory experience at the journey level as described in paragraph “2.” above, plus completion of one of the following listed below before obtaining your journey-level experience: a. Two years of full-time satisfactory experience performing work described above in “2” as a mechanic’s helper, apprentice or trainee; or b. Graduation from a recognized trade school or technical school, with a major course of study in electromechanical, electrical or electronic technology, or a closely related field totaling 600 hours; or c. Graduation from a vocational high school, with a major course of study in electro-mechanical, electrical or electronic technology, or a closely related field; or d. An associate degree or a higher-level degree, from an accredited college or university with a major course of study in electro-mechanical, electrical or electronic technology, or a closely related field. If you have qualifying part-time experience, it will be credited on a prorated basis. The vocational high school, technical school, or trade school must be approved by a State’s Department of Education or a recognized accrediting organization. The college or university must be accredited by regional, national, professional or specialized agencies recognized as accrediting bodies by the U.S. Secretary of Education, and by the Council for Higher Education Accreditation (CHEA). How to Apply: If you meet the License Requirements above, you can submit an online application by clicking on the "APPLY NOW" button from either the CAREERS page or from the JOB DESCRIPTION page. If you have previously applied online for other positions, enter your Username and Password. If it is your first registration, click on the CLICK HERE TO REGISTER hyperlink and enter a User Name and Password; then click on the REGISTER button. Selection Method / Admission Letter: Candidates may be asked to complete an education and experience test paper and also participate in one or more of the following assessments: written, practical skills and/or structured interview. Applicants must keep their contact information (email, mailing, phone) up to date. The contact information you entered in your online profile with the MTA will be used to contact you. You can update your address and other contact information.by logging into your MTA profile or by sending an email to examsunit@nyct.com. Requirements to be Appointed: Driver License Requirement: At the time of appointment, you must have a Motor Vehicle Driver License valid in the State of New York with no disqualifying restrictions that would preclude the performance of the duties of this title. If you have serious moving violations, a license suspension or an accident record you may be disqualified. This license must be maintained for the duration of your employment in the title. Drug Screening Requirement: You must pass a drug screening in order to be appointed. Residency: New York City residency is not required for this position. English Requirement: You must be able to understand and be understood in English to perform the duties and responsibilities of the position. Proof of Identity: Under the Immigration Reform and Control Act of 1986, you must be able to prove your identity and your right to obtain employment in the United States prior to employment with MTA Bus Company. Additional Information Training: You may be required to undergo a formalized training course during your probationary period. Failure to successfully complete the training course may result in termination. Probationary Period: You will be required to complete a probationary period. If you do not successfully complete the probationary period, you may be terminated. Equal Employment Opportunity: MTA is an Equal Opportunity Employer, including veteran status and individuals with disabilities. The MTA encourages qualified applicants from diverse backgrounds and experiences, including military service members, to apply.

Job DescriptionLane Valente Industries is a Leading International construction and facility maintenance company with offices throughout the U.S. and Canada. We have a strong in-house group of field technicians that services top U.S. corporations and are supported by top notch managers in our offices. We are always looking for talented people driven to be highly productive members of the team with an emphasis on integrity and learning. CURRENT OPPORTUNITY: HVAC JR. MECHANIC JOB RESPONSIBILITIES & REQUIREMENTS As an HVAC Apprentice you will assist experienced technicians with installing, maintaining, and repairing heating, ventilation, and air conditioning systems for a company that handles service work and site maintenance for national accounts. • Assist in the servicing products and equipment on assigned projects and ensuring customer satisfaction, • Uses a variety of hand-tools, following blueprints or engineering specifications, to diagnose and repair units., • Identifies, analyzes, diagnoses, and repairs systems and products at customer’s location., • Performs preventative maintenance, site surveys, replacement, and modifications as needed or requested by customers., • Prepares for on-site installation and repairs by examining building layout, anticipating difficulties, gathering materials and coordinating on-site work, as necessary., • Inspects vehicles by checking vehicle condition and cleanliness, • Maintains vehicles by keeping records of service, scheduling, and complete repairs and maintenance service, • Maintains equipment by inspecting for signs of wear. Notifies customer and/or Operations Manager of findings., • Documents work by completing paperwork on each job and maintaining files, • Represents company by serving as a direct customer contact., • Determines parts to order for repairs and timeliness of need, • Documents work by completing paperwork on each job, including daily time, progress, and duration; and maintaining files., • Records parts, material, labor, subs and other cost data per assignment and returns unused resources, • Turns in all required paperwork and reports in a timely manner., • Keeps current on all products concerning installation, operation, maintenance, service and repair, • Read and interpret product specifications, • Provides technical support to customers, • A strong willingness to learn and a positive attitude are crucial, • Flexibility to work overtime/weekends as necessary, • Regular travel requirements with some overnight travel, as needed BENEFITS OFFERED:, • Medical Insurance, • Dental Insurance, • Paid Vacations, • 401(k) retirement plan with generous company match Powered by JazzHR m8l7Qhhtk3

If you are a Construction Litigation Attorney and looking to enjoy a promising work life balance, then please read on. Why join us? Do you want to work with some of the nations best Clients AND enjoy time at home w/ family? We do too! Meaningful and Impactful Work! Competitive Base Salary! Competiti

Job DescriptionJob Title: Electrician Location: NYC Pay: $20-$35 an hour Job Description This role supports multiple construction sites across New York City by assisting foreman in electrical new construction and renovation projects. You will perform a mix of general labor electrical tasks, including bending conduit, pulling wire, running cable, and reading blueprints to support early-stage and ongoing project activities. Responsibilities • Support foremen to multiple construction sites across New York City for electrical new construction and renovation projects., • Perform general labor tasks on jobsites in early stages, including site preparation, material handling, and assisting trades as needed., • Read and interpret blueprints and electrical schematics to understand layouts, routing, and installation requirements., • Assist lead electricians and other team members with electrical installations and related tasks as directed., • Use basic hand and power tools safely and effectively to complete daily assignments., • Follow all safety protocols on site, including proper use of PPE and adherence to OSHA 30 and SST requirements., • Maintain a clean, organized, and safe work area throughout the workday., • Communicate clearly with supervisors and team members to coordinate tasks and ensure work progresses on schedule. Essential Skills • Proficiency in pulling wire and running electrical cables., • Ability to bend and install conduit in various configurations., • Capability to read and interpret blueprints and electrical schematics., • Skilled in using basic hand and power tools safely and effectively., • Current OSHA 30 certification., • Current SST (Site Safety Training) certification., • Ability to consistently use and maintain appropriate personal protective equipment (PPE). APPLY TODAY!! Job Type & Location This is a Contract position based out of New York, NY. Pay and Benefits The pay range for this position is $20.00 - $35.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in New York,NY. Application Deadline This position is anticipated to close on Oct 12, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionJob Title: Electrical ForemanJob Description The Electrical Foreman oversees electrical construction activities on a large retail facility project, ensuring that all work is completed safely, efficiently, and in compliance with project specifications and electrical codes. This role coordinates field operations, guides electricians and helpers, and interprets blueprints to deliver high-quality electrical installations within established timelines. Responsibilities • Lead and supervise electrical construction work on a retail facility project from planning through completion., • Interpret and review electrical blueprints and construction drawings to plan daily work activities and ensure accurate installation., • Coordinate and assign tasks to electricians and other field personnel to meet project schedules and milestones., • Monitor the quality of electrical installations to ensure compliance with project specifications, industry standards, and applicable electrical codes., • Collaborate with other trades and site personnel to sequence work and resolve conflicts in the field., • Ensure proper use of tools, equipment, and materials for electrical construction activities., • Identify and communicate material, labor, or schedule needs to support uninterrupted project progress., • Promote and enforce safety practices and procedures on the job site, including safe electrical work methods., • Inspect completed work regularly and make adjustments or corrections as needed to maintain high standards., • Provide on-the-job guidance and direction to less experienced workers to support skill development and consistent performance.Essential Skills, • Hands-on experience in electrical construction within commercial or retail facility projects., • Ability to read, interpret, and work from electrical blueprints and construction drawings., • Strong understanding of electrical systems, components, and installation practices in a construction environment., • Demonstrated capability to oversee and coordinate electrical work in the field., • Knowledge of basic construction practices, sequencing, and coordination with other trades., • Attention to detail and commitment to delivering accurate, code-compliant electrical installations., • Effective communication skills for directing crews and collaborating with site personnel., • Strong organizational skills to manage multiple tasks and priorities on an active job site.Additional Skills & Qualifications, • Prior experience in a foreman or lead electrician role on construction projects., • Familiarity with retail or large commercial facility construction environments., • Ability to troubleshoot electrical issues and propose practical solutions., • Basic understanding of safety standards and best practices related to electrical construction., • Capability to document work progress and report issues or delays to project leadership.Why Work Here? Join a project-focused team that values high-quality workmanship, clear communication, and safe work practices. You will have the opportunity to take ownership of significant electrical construction activities, collaborate closely with experienced tradespeople, and contribute to a visible, large-scale facility build. The environment encourages professional growth through hands-on responsibilities and exposure to complex electrical installations. Work Environment This role is based on an active construction site within a large retail facility project. Work is primarily performed on-site, involving regular use of standard electrical tools, equipment, and materials. The position requires working in and around construction areas, including exposure to noise, dust, and varying temperatures. Hours typically follow standard construction shifts, with potential for extended or weekend work depending on project needs. Attire should be appropriate for a construction environment, including sturdy work clothing and required protective gear such as hard hats, safety glasses, and work boots. Job Type & Location This is a Contract position based out of Bronx, NY. Pay and Benefits The pay range for this position is $25.00 - $35.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Bronx,NY. Application Deadline This position is anticipated to close on Oct 12, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description HVAC Service Manager Highly respected Mechanical Contractor in Middlesex County seeks Service Manager: • 5+ years of HVAC Construction & Service experience, • Act as technical source for team, • Client interaction skills, • Select and order equipment, purchasing, • Dispatch, • Schedule labor and assist with payroll, • Assist with sales and estimates, • Service planning, • Invoicing, • Commercial and large retail project background desired Please send resume to Tony Gallagher, Liberty Personnel: #MechanicalGC #midsenior \nCompany Description Libertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move! Hundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month. Established in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on: Information Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists. Libertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move!\n\nHundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month.\n\nEstablished in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on:\n\nInformation Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.

Who You Are: \n You are a strategic Footwear costing leader who partners closely with Product Development, Supply Chain, Design, Merchandising, and factories to drive costing strategy, margin performance, negotiations, and team development. \n \n What You’ll Do: \n\n • Lead the end-to-end Footwear costing process from concept through final cost approval.\n, • Lead cross-functional alignment with Product Development, Design, Merchandising, and Materials team to achieve seasonal margin targets.\n, • Drive margin optimization by identifying cost drivers, mitigating risks, and implementing cost-saving opportunities.\n, • Lead factory cost negotiations and maintain accurate costing documentation and governance.\n, • Proactively manage costing calendars, systems, and processes to ensure timely decisions and business visibility.\n, • Educate and influence cross-functional teams on cost drivers, margin impact, and financial trade-offs.\n, • Monitor factors affecting product costs, including commodities, labor, duties, tariffs, freight, transportation, and foreign exchange.\n, • Partner with Planning, Finance, and Supply Chain to assess landed costs, tariff exposure, and margin implications.\n, • Develop executive-level reporting and presentations for leadership, highlighting margin performance, risks, and opportunities.\n, • Establish KPI reporting for factories and cross-functional partners, including performance against cost targets, variance analysis, and adoption of cost-effective solutions.\n, • Oversee costing systems, tools, and reporting to ensure accuracy, milestone readiness, and clear business visibility.\n, • Lead continuous improvement of costing processes, analytics, and reporting capabilities.\n, • Lead strategic costing and analytics projects that support business objectives.\n, • Manage two direct reports, Associate Manager and Manager of Footwear Costing.\n\n \n You’ll Need to Have: \n\n • 10+ years of Footwear costing, sourcing, manufacturing, gross margin management, or related experience, including people leadership.\n, • Deep knowledge of footwear construction, materials, labor, overhead, manufacturing processes, and key cost drivers.\n, • Proven ability to identify cost-saving opportunities and successfully negotiate costs with factories and suppliers.\n, • Strong understanding of footwear duty classifications, tariffs, landed cost impacts, and global sourcing dynamics.\n, • Advanced Excel and analytics skills, including complex formulas, macros, scalable tools, and executive-level reporting.\n, • Ability to estimate footwear costs from sketches, CADs, specifications, materials, and construction details.\n, • Demonstrated success reducing margin risk and driving profitability through strategic costing decisions.\n, • Strong leadership and communication skills\n\n \n We’d Love to See: \n\n • Proficiency in PLM, RLM, Tableau, or other reporting tools.\n, • Strong analytical and mathematical skills.\n, • A detailed oriented and organized mindset\n, • Strong planning and time management skills.\n, • Strong large-scale data analysis\n, • Excellent data organization, documentation, and follow-through.\n\n \n MK Perks: \n\n • Generous Paid Time Off & Holiday Calendar\n, • Summer Fridays\n, • Internal Mobility Across Brands\n, • Cross-brand Discount\n, • Exclusive Employee Sales\n, • Fav 5 Cards (MK Discount for friends and family)\n, • 401k Match\n, • Paid Parental Leave\n, • Thrive Wellness Program\n, • Commuter Benefits\n, • Gym Discounts\n\n \n The Company is an equal employment opportunity employer. The Company’s policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, military status, disability, genetic information or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. \n \n At Capri Holdings Limited, we are committed to providing a fair and accessible recruitment process. If you require a reasonable accommodation for the interview or application process, please contact our Talent Acquisition team at CapriTalentAcquisition@CapriHoldings.com. \n \n In compliance with certain Pay Transparency laws, employers are required to disclose a salary range. The salary for this position will vary based on role requirements, skill set and years of experience. \n \n About Us: \n Michael Kors is a world-renowned, award-winning designer of luxury accessories and ready-to-wear. His namesake company, established in 1981, currently produces a range of products under Michael Kors Collection, Michael Kors, and Michael Kors Mens, including accessories, ready-to-wear, footwear, watches, jewelry, and a full line of fragrance products. Michael Kors stores are operated in the most prestigious cities in the world, including New York, Los Angeles, Chicago, London, Milan, Paris, Dubai, Seoul, Tokyo, Hong Kong, Shanghai, and Rio de Janeiro. In addition, Michael Kors operates digital flagships across North America, Europe, and Asia, offering customers a seamless omnichannel experience. \n \n At the center of it all is a designer who has created an enduring and iconic luxury lifestyle brand with a distinctive point of view and global reach. Michael Kors has a sharp focus on providing his customers with accessories and clothes that are consistently polished, chic, relaxed, and glamorous. Kors has also been the recipient of numerous industry awards and accolades within the fashion industry. \n \n The fashion designer also focuses on giving back. For more than 35 years he has been a passionate supporter of God’s Love We Deliver, a New York-based non-profit organization that cooks and delivers nutritious meals to people living with serious illnesses in and around New York City. In 2013, in a move to broaden his philanthropic efforts, Michael Kors launched “Watch Hunger Stop,” partnering with the United Nations World Food Programme (WFP) to help fight world hunger. Proceeds from annual special-edition products and other targeted initiatives help provide food to children through WFP’s school meals program. To date, Michael Kors has helped WFP deliver over 35 million meals (and counting) to hungry children.

Job Description Pay: $22–$35 per hour (commensurate with experience) Job Type: Full-time Location: Brooklyn, NY 11207 (in person) Position: Fencing Installer Energy Fencing Inc. is New York’s premier fencing company, proudly operating under the motto “With energy, anything is possible.” Our commitment to excellence, reliability, and customer satisfaction drives us to deliver top-quality fencing installations, gates, and custom ironworks. We are seeking experienced Fencing Installers to join our field operations team. The ideal candidate will have hands-on experience installing commercial and residential fencing systems, a strong work ethic, and the ability to work safely and efficiently in a fast-paced construction environment. Key Responsibilities • Fence Installation: Install chain link, ornamental iron, vinyl, wood, and specialty fencing systems., • Site Preparation: Measure, layout, and prepare project sites for installation., • Equipment Operation: Safely operate hand tools, power tools, augers, and other installation equipment., • Quality Assurance: Ensure all installations meet company standards and project specifications., • Safety Compliance: Follow OSHA regulations and company safety policies at all times., • Team Collaboration: Work closely with supervisors and crew members to complete projects on schedule., • Customer Service: Represent Energy Fencing professionally while interacting with clients and site personnel. Qualifications • Previous fencing installation experience required., • Knowledge of chain link, ornamental iron, wood, vinyl, and commercial fencing systems., • Ability to read plans, measurements, and project layouts., • Ability to perform physically demanding outdoor work., • Valid driver's license preferred., • English proficiency (required)., • Must be located in NYC or within 25 miles of Brooklyn, NY 11207., • Ability to commute to Brooklyn, NY 11207 (required) and various job sites. Work Environment • Outdoor construction environment., • Work performed in various weather conditions., • Physical labor including lifting, digging, and equipment operation., • Compensation & Benefits, • Salary: $22–$35 per hour (commensurate with experience), • Compensation Package: Overtime opportunities, performance bonus, yearly bonus Benefits: • 401(k), • Paid time off (10 PTO days), • Professional development opportunities, • Schedule, • 8-hour shifts, • Day shift, Monday–Friday, • Occasional overtime as needed Energy Fencing Inc. is an equal opportunity employer. We encourage applicants from all backgrounds to apply.

Job Description Now hiring a Skilled Laborer to support commercial construction projects involving the installation and maintenance of commercial-grade pools and spas. This role will assist with new construction and renovation projects. OSHA 10 certification is required; training is provided for able-bodied candidates who are willing to learn. Candidates with concrete experience are strongly preferred. Responsibilities • Prepare construction sites for commercial pool and spa projects., • Handle and stage materials, tools, and equipment., • Assist with concrete work and related construction tasks., • Support the installation of commercial-grade pools and spas., • Assist with maintenance, renovations, and new construction projects., • Maintain clean and organized work areas through regular site cleanup., • Follow OSHA 10 requirements and applicable job-site safety practices., • Assist crew members with general construction activities. Required Qualifications • OSHA 10 certification., • Ability to perform physical construction labor., • Willingness to learn and receive training. Preferred Qualifications • At least 1 year of experience in commercial construction labor., • Experience with concrete work.\nCompany Description For more than 20 years, Tradeco Construction is and has been the premier choice for customers seeking additional manpower for their mechanical, electrical and plumbing services. This is because we only hire and retain the most reliable, safety-oriented, highly skilled electricians that pride themselves on the highest quality workmanship. All employees, including our Managers and Leadership Team, work hard each day to maintain a positive working environment while treating everyone with the highest level of professionalism, kindness, and respect. We invite you to experience what it's like to be part of an organization that cares! For more than 20 years, Tradeco Construction is and has been the premier choice for customers seeking additional manpower for their mechanical, electrical and plumbing services. This is because we only hire and retain the most reliable, safety-oriented, highly skilled electricians that pride themselves on the highest quality workmanship. All employees, including our Managers and Leadership Team, work hard each day to maintain a positive working environment while treating everyone with the highest level of professionalism, kindness, and respect. We invite you to experience what it's like to be part of an organization that cares!

Category Manager (Global Real Estate & Construction Procurement) \n New York, NY (Onsite) \n 24-Month Contract \n JPC - 20653 \n \n The Category Manager, Global Real Estate (Design & Construction) leads strategic sourcing, procurement, supplier management, and commercial contract activities supporting Client's global real estate portfolio. The role is responsible for developing and executing category strategies across architecture, engineering, project management, construction, furniture, technology infrastructure, and other workplace-related services. \n \n This position partners closely with Global Real Estate, Finance, Legal, Risk, and business stakeholders to ensure client projects are delivered through best-in-class procurement practices that optimize cost, quality, schedule certainty, supplier performance, sustainability, and risk management. The role supports the firm's Global Location Strategy through disciplined sourcing, vendor governance, and commercial leadership across a diverse global portfolio of projects and services. The role manages strategic supplier relationships and leverages enterprise buying power to establish scalable procurement programs and master service agreements. \n \n Qualifications: \n Required: \n\n • Bachelor's degree in Supply Chain Management, Business, Construction Management, Engineering, Architecture, Real Estate, or related field.\n, • 10+ years of strategic sourcing, procurement, or commercial management experience.\n, • Minimum 5 years of direct experience supporting corporate real estate, workplace, design, or construction programs.\n, • Demonstrated experience leading complex RFPs and global sourcing initiatives.\n, • Experience negotiating professional services agreements, construction contracts, consulting agreements, and master service agreements.\n, • Strong financial acumen, contract management expertise, and commercial negotiation skills.\n, • Strong stakeholder management capabilities within a matrixed global organization.\n, • Proficiency with sourcing intake, contract lifecycle, procurement workflow, and supplier management technology platforms, including Zip, Ariba, or comparable enterprise systems.\n\n \n Preferred: \n\n • Experience within asset management, banking, insurance, private equity, or other highly regulated financial services organizations.\n, • Experience supporting global office portfolios and enterprise workplace programs.\n, • Professional certifications such as CPSM, CIPS, PMP, MRICS, CCM, or LEED.\n, • Familiarity with construction delivery methods including Design-Bid-Build, CMAR, Design-Build, and Integrated Project Delivery.\n, • Experience working across North America, EMEA, APAC, and Latin America.\n\n \n Success Measures: \n\n • Savings and value creation versus approved budgets.\n, • Supplier performance and service quality metrics.\n, • Successful execution of global sourcing and procurement programs.\n, • Risk mitigation and contract compliance.\n, • Stakeholder satisfaction.\n, • Procurement cycle-time improvements and sourcing efficiency.\n, • Consistent adoption of ESO sourcing standards and technology-enabled processes, including accurate use of Zip, Ariba, and related procurement systems for pipeline tracking, sourcing execution, approvals, and reporting.\n, • Contribution to successful delivery of workplace client projects globally.\n\n \n Responsibilities: \n Category Strategy & Strategic Sourcing \n\n • Develop and execute global category strategies for design, construction, project management, furniture, workplace technology, facilities services, and related real estate spend categories.\n, • Conduct spends analysis, market intelligence, supplier benchmarking, and risk assessments to identify sourcing opportunities and category optimization initiatives.\n, • Translate spend analysis, supplier market intelligence, and total cost of ownership insights into quantified savings targets and measurable value creation opportunities.\n, • Establish multi-year sourcing roadmaps aligned with Client's global workplace and real estate objectives.\n, • Monitor industry trends, construction markets, labor conditions, material pricing, and emerging supplier capabilities.\n, • Maintain current supplier market maps and external benchmarking to inform sourcing strategies, negotiation positions, and supplier selection decisions.\n, • Identify opportunities for standardization, supplier consolidation, and improved commercial terms across regions.\n\n Design & Construction Procurement \n\n • Lead sourcing activities for client projects globally, including consultant selection, design services, owner's representative services, furniture procurement, general contractors, and specialty vendors.\n, • Develop and manage RFIs, RFQs, RFPs, bid evaluations, supplier interviews, and recommendation packages.\n, • Define structured RFx evaluation criteria, scoring methodology, decision documentation, and defensible award recommendations based on price, quality, delivery, risk, and stakeholder requirements.\n, • Facilitate competitive procurement processes while balancing cost, quality, schedule, risk, and stakeholder requirements.\n, • Partner with project teams to establish procurement strategies aligned with project delivery objectives.\n, • Support project budgeting and forecasting activities through market pricing, benchmarking, and procurement planning.\n\n Contract Negotiation & Commercial Management \n\n • Lead commercial negotiations and contract execution activities for design and construction-related agreements.\n, • Partner with Legal and Risk Management to establish contract standards and negotiate favorable commercial terms.\n, • Negotiate master service agreements, statement of work templates, rate cards, and project-specific agreements.\n, • Ensure appropriate risk allocation, insurance requirements, indemnification provisions, performance obligations, and service-level expectations.\n, • Drive measurable value through commercial negotiations, scope optimization, and contract governance.\n\n Supplier Relationship Management \n\n • Establish supplier governance programs for strategic design, construction, and workplace vendors.\n, • Conduct supplier performance reviews and business reviews with key vendors.\n, • Develop scorecards and performance metrics related to cost, quality, schedule, innovation, safety, sustainability, and service delivery.\n, • Collaborate with suppliers to drive continuous improvement initiatives and innovation opportunities.\n, • Manage supplier escalations and facilitate resolution of commercial or performance issues.\n\n Capital Project Support \n\n • Partner with Global Real Estate project managers, workplace planning teams, design leaders, and business stakeholders throughout the project lifecycle.\n, • Support project planning, budget development, procurement schedules, and risk management activities.\n, • Participate in design reviews, project governance meetings, and executive presentations as required.\n, • Provide commercial guidance related to change orders, contract modifications, claims management, and procurement-related decisions.\n, • Ensure procurement activities align with approved capital plans and governance requirements.\n\n Governance, Risk & Compliance \n\n • Ensure compliance with Client’s procurement policies, delegated authority requirements, and financial controls.\n, • Promote ethical sourcing practices and transparency throughout procurement activities.\n, • Support supplier diversity, sustainability, and corporate responsibility initiatives where appropriate.\n, • Apply ESO standard sourcing processes, workflows, and controls consistently across sourcing activities, including intake, competitive events, approvals, contracting, supplier onboarding, and documentation.\n, • Use enterprise procurement and sourcing technology platforms (including Zip for intake and Ariba for contract management and payments) and related systems of record, to manage sourcing pipeline visibility, event execution, approvals, supplier records, and audit-ready documentation.\n, • Maintain procurement documentation and audit-ready records.\n, • Identify and mitigate supplier, commercial, operational, and geopolitical risks.\n\n Leadership & Stakeholder Management \n\n • Build trusted partnerships with senior business leaders, project sponsors, and cross-functional stakeholders.\n, • Influence sourcing decisions through data-driven analysis and sound commercial judgment.\n, • Mentor procurement team members and contribute to the development of procurement best practices.\n, • Lead complex sourcing initiatives across multiple regions, business units, and stakeholder groups.\n\n \n Pay Range for CA, CO, IL, NJ, NY, WA, and DC: $103/hour to $103/hour. Starting rate of pay offered may vary depending on factors including but not limited to, position offered, location, education, training, and/or experience. \n \n Solugenix will consider qualified applicants with a criminal history pursuant to the California Fair Chance Act and Ordinance. Applicants do not need to disclose their criminal history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if we are concerned about conviction that is directly related to the job, applicants will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report.

Job Description Job Title: Yard Worker Job Description This entry-level yard worker role focuses on cleaning and preparing steel forms used for concrete projects worldwide. You will handle general labor tasks, including cleaning, assembling and disassembling components, and preparing forms for painting and repair. The position involves moving, stacking, bundling, and palletizing parts, as well as operating material handling equipment, while consistently following established operational procedures. Responsibilities • Clean and prepare steel forms used for concrete projects to ensure they are ready for painting and repair., • Assemble and disassemble steel form components and replace parts as needed., • Able to lift up to 50 lbs, • Move, stack, and organize parts in the yard and work areas according to instructions., • Operate material handling equipment safely to transport and position materials and products., • Count, stack, bundle, band, and palletize parts to meet production and shipping requirements., • Use hand tools and power tools to assist with assembly, disassembly, and general yard work., • Perform general cleaning tasks to maintain a safe, organized, and efficient work environment., • Follow all operational procedures, safety guidelines, and work instructions consistently., • Work outdoors approximately 70% of the time, adapting to varying weather conditions., • Complete tasks with minimal supervision while maintaining punctuality and reliability. Essential Skills • Ability to perform physical labor and handle strenuous tasks, including heavy lifting., • Experience or comfort with general labor, yard work, and general production activities., • Ability to use hand tools and power tools safely and effectively., • Capability to follow directions to move product and help assemble product accurately., • Strong attention to detail when cleaning, preparing, stacking, bundling, and palletizing parts., • Ability to work in all weather conditions, including outdoor work approximately 50% of the time., • Ability to work with minimal supervision and maintain productivity., • Punctuality and reliability in attendance and task completion. Additional Skills & Qualifications • Comfort working in a yard or industrial environment., • Willingness to learn new tasks and build practical, hands-on skills., • Basic mechanical aptitude for assembling and disassembling components., • Strong work ethic and commitment to following established procedures and safety rules. Why Work Here? Join a global organization where you can develop valuable hands-on skills and grow your experience in an industrial environment. You will have the opportunity to build a strong foundation in general labor, material handling, and equipment use, with exposure to large-scale projects and consistent work. The culture supports reliability, learning, and practical skill development, offering a solid pathway for long-term growth in a production or yard operations setting. Work Environment This role is based in a yard and production environment that involves both indoor and outdoor work, with approximately half of the time spent outside in varying weather conditions. You will work around steel forms, material handling equipment, and standard hand and power tools, following established safety and operational procedures. The work is physically demanding, including heavy lifting, standing for extended periods, and moving materials throughout the shift. Attire typically includes practical work clothing suitable for outdoor conditions, along with any required safety gear such as work boots, gloves, and protective equipment as directed. Job Type & Location This is a Contract position based out of Kenilworth, NJ. Pay and Benefits The pay range for this position is $21.00 - $22.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Kenilworth,NJ. Application Deadline This position is anticipated to close on Oct 7, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Join our team as a Landscape Laborer at Newark Airport. We are looking to hire immediately. The Landscape Laborer is responsible for keeping the entire outside perimeter of Newark Airport clean. This job is performed outside all year long. In this role you will pick up debris from the sides of the highway, taxi lot, uber lot and some parking garages using a picker. You will also trim hedges around airport signs on a as needed basis. You must be OSHA 30 certified for this job. The hours are Monday to Friday 7am to 3:30pm except Thursday 10am to 6:30pm. Responsibilities • Assist with keeping the perimeter of the airport clean by removing debris., • Support other team members, by working as a team player., • Operate hand tools and power tools safely when picking up debris, cutting shrubs, bushes or grass., • Conduct routine site inspections to ensure safety standards are met and report any issues requiring maintenance or repair Skills • Experience as general labor. OSHA 30 certification, mandatory., • Basics knowledge of landscape maintenance., • Proficiency with hand tools and power tools (chainsaws, blowers) used in landscaping., • Strong teamwork ethic with the ability to follow detailed instructions while working efficiently outdoors with other., • Commitment to safety protocols when handling equipment and working outdoors on very busy highways.\nCompany Description Capital Cleaning Service aka Flagg Labor supports general contractors and builders by sending general laborers and support trades to construction jobsite to keep the jobs running smoothly and efficiently. We also provide building maintenance threw our commercial cleaning/janitorial services. We are an industry leader in our field and have been doing this for over 15 years. Capital Cleaning Service aka Flagg Labor supports general contractors and builders by sending general laborers and support trades to construction jobsite to keep the jobs running smoothly and efficiently. We also provide building maintenance threw our commercial cleaning/janitorial services. We are an industry leader in our field and have been doing this for over 15 years.

Job Description For over 60 years, APEX Technical School has helped students get the training they need to go after the jobs they want through our unique program of both classroom and hands-on instruction. Your skills and passion can make a difference for the next generation of students. APEX is looking for a highly skilled Construction Instructor to teach hands-on work with a group of students who are eager to learn. ABSOLUTELY no teaching experience required. You supply the skills and we supply everything else, even the tools! Requirements • 3+ years hands-on fieldwork experience in the construction trade with experience in Carpentry, Plumbing, and Electric, • Kitchen and Bathroom remodel experience, • Experience in Framing, Sheetrock, Roofing, and Siding, • Basic branch circuit knowledge, • Experience in installing Plumbing Fixtures and DWV Qualifications • Proficient in reading blueprints, manuals, and electrical schematics, • Highly skilled in working with electrical equipment and hand tools, • Strong problem solving and critical thinking skills, • High School Diploma or GED Company Benefits • Salary pay, • Medical, Dental, and Vision insurance, • 403B (Retirement plan), • Extra Shifts available, • Paid Vacation and Holidays Shifts • Full-time Morning-Afternoon Shift\nCompany Description Mission: We are committed to improving the economic and social well-being of the impoverished and disadvantaged. For 85 years, The Fedcap Group has developed scalable, innovative and potentially disruptive solutions to some of society’s most pressing needs. The Fedcap Group is the parent company of a growing number of top-tier nonprofit agencies dedicated to serving over 300,000 children and adults each year across the United States and the United Kingdom. The Fedcap Group provides educational services to every age group, vocational training in high-growth labor industries, behavioral health services, work readiness skill-building and jobs—all targeted to helping people achieve long-term self-sufficiency. The work of The Fedcap Group is structured within four major practice areas: Education, Workforce Development, Occupational Health and Economic Development, which are strategically aligned for maximum impact. The Fedcap Group also invests its time and resources in broader systems change—working in partnership with federal, state and local government to improve the way services are designed, funded, and delivered. Mission: We are committed to improving the economic and social well-being of the impoverished and disadvantaged. \r\n\r\nFor 85 years, The Fedcap Group has developed scalable, innovative and potentially disruptive solutions to some of society’s most pressing needs. The Fedcap Group is the parent company of a growing number of top-tier nonprofit agencies dedicated to serving over 300,000 children and adults each year across the United States and the United Kingdom. The Fedcap Group provides educational services to every age group, vocational training in high-growth labor industries, behavioral health services, work readiness skill-building and jobs—all targeted to helping people achieve long-term self-sufficiency. \r\n\r\nThe work of The Fedcap Group is structured within four major practice areas: Education, Workforce Development, Occupational Health and Economic Development, which are strategically aligned for maximum impact. \r\n\r\nThe Fedcap Group also invests its time and resources in broader systems change—working in partnership with federal, state and local government to improve the way services are designed, funded, and delivered.

Job Description • Job Overview, • We are seeking a reliable and skilled Class A Truck Driver to join our team. The ideal candidate MUST HAVE ROLL OFF EXPERIENCE. Candidate must be familiar with operating various types of trucks, including roll-off trucks, dump trucks, flatbeds, tankers, and tractor-trailers. As a Truck Driver, you will be responsible for transporting freight safely and efficiently, delivering materials and equipment to & from job sites, while adhering to all traffic laws and company policies. Must know how to load & unload flatbeds. Must be able to work independently. NCCCO Crane Certification is a plus, but not required. This position involves a combination of commercial driving duties and yard or warehouse labor. Therefore candidate must be able to lift 80 lbs., • Equipment Operation: Safely drive specialized roll-off trucks to deliver empty dumpsters and pick up full ones using a hydraulic cable mechanism., • Safety & Inspections: Conduct thorough DOT pre-trip and post-trip vehicle inspections (e.g., brakes, tires, hydraulics) and document them., • Load Security: Ensure all hauled debris is evenly distributed and properly tarped to prevent materials from flying out during transit., • Compliance: Strictly adhere to all DOT, OSHA, and local traffic regulations., • Route & Site Navigation: Maneuver long and heavy vehicles into restricted spaces, such as tight alleyways, construction zones, and busy commercial properties., • Communication: Coordinate daily with dispatchers regarding day to day work. We are \nCompany Description We are a Roofing Contractor We are a Roofing Contractor

Job Description Senior Electrical Engineer – Project Manager Watch your work come to life in landmark projects around the world when you partner with Syska Hennessy Group! As a global leader in consulting, engineering, and commissioning services, we specialize in MEP, information and communication technology, architectural lighting, vertical transportation, and commissioning. We are seeking a Senior Electrical Engineer - Project Manager to join our team in New York, NY. Our team is looking for a candidate with significant electrical design experience, specifically with healthcare or Aviation/Transportation or Critical Facilities projects and 3 years of Project Management experience at a minimum. This candidate should also have the desire to help grow our team and manage and develop our young mechanical engineers. Our dynamic work environment provides the optimal setting to take your engineering career to the next level. From our supportive culture, diverse workforce, and competitive compensation to our flexible work schedule Monday to Thursday in the office for 9 hours and Friday for 4 hours remotely at home and fun social events, it is everything you will need for an exciting, challenging, and rewarding career. Job Responsibilities As a Senior Electrical Engineer-Project Manager, you will be responsible for representing the Firm in all interactions with clients, contractors, architects, and other project team members. You will be responsible for designing large projects, preparing reports and specifications, and providing a high level of technical leadership. Additional responsibilities include: • Establishing design standards, specifications, and criteria for projects, • Supervising preparation of reports and analysis of system options and building conditions, • Maintaining interdisciplinary coordination with other trades/projects consultants, • Monitoring all correspondence between staff, clients, contractors, owners, etc., • Supervising construction administrative duties such as field reports, responses to RFIs, processing bulletins and addenda, etc., • Periodic objective and comprehensive employee evaluations, • Participate in and contribute to business unit Technical Leadership Committee, • Assist Technical Manager and Chief Engineer in business unit technical training and staff mentoring Job Requirements • Bachelor's degree in Electrical engineering from an Accredited Institution, • 7 - 10 years' experience working in a consulting firm, this is a Senior level role that requires a background in the MEP Engineering Industry, • 3 years of supervisory experience, • Hands-on design and CAD/REVIT experience, required, as you will have a very strong technical role, • PE required Benefits As an employee with Syska Hennessy Group, you will be part of a global firm with an amazing history! We are committed to being the best, to advancing engineering design practice, and to supporting our clients with integrity. To make all of that happen, we rely on the talent, drive, enthusiasm, and the total job satisfaction of the great people who work here. As a member of our highly collaborative team, we provide you with a flexible benefits package that reflects our respect for your workplace contributions, professional goals, and personal priorities. The personal benefits program at Syska Hennessy Group includes: • Robust, comprehensive medical, dental, vision, life insurance and supplemental benefit plans, • 401(k) plan with a generous employer matching program, • Training and professional development courses, • Professional development incentive bonuses, • Dynamic Employee Resource Groups, • Competitive Paid Time Off (PTO) policy, • Transit/parking employer stipend, • ½ day work from home Fridays all year long At Syska, we promote an environment that is committed to embedding diversity and equality into the core of our business and culture. We empower our employees so they can take ownership for their work and development and strive to continually improve themselves and our firm. Syska is a place where you can build an exceptional career and have a lasting impact on the world. Syska Hennessy Group | Integrating the best minds and technology to help clients create exceptional environments. The salary range listed below is for this particular job posting. Actual pay range for candidates will be commensurate with candidate's experience, skillsets and competencies and may differ based on the cost of labor in their particular location. New York Pay Range $116,615—$169,922 USD

Job Description Sunkeeper Solar Overview Sunkeeper Solar designs and installs solar photovoltaics, cogeneration, and battery energy storage in standalone and hybrid configurations to offset fossil fuel consumption, provide off-grid resiliency, and equip buildings to partake in the clean energy transition. Comprised of an experienced team of installers, electrical workers, engineers, and technicians, with a deep understanding of the New York City clean-energy and construction landscapes, Sunkeeper Solar is an ideal partner for any and all distributed generation projects in the NYC Metro area. Solar Electrician: Responsibilities • Install electrical service equipment, wiring, and devices required for commercial solar PV and ESS systems., • Ensure electrical systems meet company standard job specifications, the National Electrical Code, and other relevant local codes., • Lead job safety, participate in Job Hazard Analysis, ensure proper PPE is maintained at all times, • Assist in solar crew support including staging materials, general site work support, as well as site preparation and clean up, • Maintain proper organization of company-provided tools and materials, ensuring that essential supplies remain in stock., • Communicate professionally and treat clients, contractors, tradespeople, coworkers, and the public with respect and kindness., • Troubleshoot electrical issues independently, • Operate various tools such a threader, core drill, conduit bender, • Read and understand all Sunkeeper drawings with the ability to accurately translate such documents into physical space, • Understand and teach all company policies, including company safety policy to crew, • Turn in receipts on time with proper notes, • Mark layouts neutrally for electrical equipment, plan and execute complex conduit runs, and lead wire pulls effectively., • Utilize Procore for managing daily photos, RFIs, punch lists, drawings, and inspections, while providing regular job status updates and completing necessary paperwork., • Perform quality inspections on electrical equipment, • Participate in electrical shutdown work during off hours if needed, • Utilizes good judgment in gray area situations, • Drive company vehicles and trucks when needed, • Maintain a clean driving record, if assigned driving duties, • Maintain a valid 40-hour SST Card pursuant to Local Law 196, • Maintain a Labor Utilization Rate of >89%., • Actively bring new ideas about improving corporate quality, efficiency, and safety, to the persons best-positioned to implement them Reporting: Solar Electrician will report directly to the Solar Lead Electrician. Requirements: • Minimum 5 years of relevant electrical experience on commercial jobsites, • Ability to travel to job sites within the NYC metropolitan area., • Able to read electrical and architectural plans, • Skilled in large-conduit and large-conductor installation, with hands-on experience operating wire tuggers, • Must be able to work outdoors in various weather conditions (hot and cold), repeatedly lift 50 lbs, climb ladders, and use standard hand tools., • Ability to follow verbal and auditory instructions during on-site work; must be able to meet all physical job requirements with or without reasonable accommodation., • Solar installation experience is preferred but not required., • Strong knowledge of the National Electrical Code (NEC) is required., • Ability to comprehend and execute the installation of electrical service equipment, including transformers, meter banks, and fuse switches., • Be skilled in critical path analysis for project planning and execution., • Capable of designing and explaining a fall rescue plan., • Ability to specify and implement a fall protection system., • Familiarity with cost-benefit analysis for project efficiency., • Proven ability to retain personnel on the crew., • Strong communication skills to coordinate effectively with project managers, clients, other trades, and Sunkeeper installers., • Must maintain a positive and professional attitude at all times Compensation: $28 - 35 / hour; commensurate with experience. Powered by JazzHR E2EGrfCs3T

Job Description Are you in search of a company that resonates with your proactive spirit and entrepreneurial mindset? Your search ends here with Premier Truck Rental! Company Overview At Premier Truck Rental (PTR), we provide customized commercial fleet rentals nationwide, helping businesses get the right trucks and equipment to get the job done. Headquartered in Fort Wayne, Indiana, PTR is a family-owned company built on a foundation of integrity, innovation, and exceptional service. We serve a wide range of industries—including construction, utilities, and infrastructure—by delivering high-quality, ready-to-work trucks and trailers tailored to each customer's needs. At PTR, we don't just rent trucks—we partner with our customers to drive efficiency and success on every job site. The Contract Driver is a vital member of our team, responsible for safely and efficiently transporting our fleet to and from customer locations and external yards across the United States. This role involves operating a Commercial Motor Vehicle (CMV), performing labor tasks as needed, and ensuring full compliance with all DOT regulations and safety guidelines. The contract driver will be expected to maintain the highest standards of safety, customer service, and excellence in every aspect of their work. LOCATION • Remote COMPENSATION • Compensation is based on a pay-per-mile structure, with earnings averaging $30 per hour. RESPONSIBILITIES • Safely operate motor vehicles, adhering strictly to all traffic laws and adjusting to various traffic and road conditions., • Ensure compliance with Federal Motor Carrier Safety Regulations and DOT guidelines, including maintaining accurate logbooks and undergoing required drug/alcohol screenings., • Deliver outstanding customer service throughout the transportation process to PTR customers., • Conduct thorough pre-trip and post-trip inspections to verify that vehicles are in safe operating condition., • Maintain cleanliness and operational integrity of vehicles and equipment, promptly reporting any necessary repairs or maintenance., • Accurately complete and maintain all required paperwork within the vehicle., • Properly secure cargo before transit in compliance with all applicable regulations., • Ensure that all equipment used is up-to-date and in optimal working condition (less than three years old). REQUIREMENTS MUST HAVE • A valid Class A Commercial Driver's License (CDL) with Airbrake endorsement., • At least 2 years of experience driving a Commercial Motor Vehicle., • High School Diploma, G.E.D., or equivalent., • Minimum age of 21 years., • Ability to lift 50 lbs. and perform physical tasks such as loading and unloading fleet., • Willingness to work a flexible schedule, including overnights and weekends., • Ability to work efficiently under tight deadlines., • Successful completion of a DOT Physical Examination and possession of a valid Medical Card., • Clean Motor Vehicle Record (MVR) and Driver History Report., • Proven understanding of proper loading and securing techniques to prevent freight movement and ensure safe transport., • Willingness to assist with loading/unloading as needed. NICE TO HAVE • Experience with car hauling., • Ability to work in diverse conditions, including inclement weather and other unforeseen circumstances., • Experience operating vehicles in various environments, including city traffic, highway traffic, and long-distance driving., • Strong communication skills, with the ability to maintain proactive and open communication with team members. Employee Benefits At Premier Truck Rental (PTR), we invest in our people by offering competitive benefits, wellness programs, and growth opportunities designed to support you both professionally and personally. Wellness & Fitness Take advantage of our on-site CrossFit-style gym, featuring a full-time personal trainer dedicated to helping you reach your fitness goals. Whether you're interested in group classes, virtual personal training, personalized workout plans, or nutrition coaching, we've got you covered. Exclusive Employee Perks Enjoy a variety of additional benefits designed to make life a little easier and more enjoyable: • PTR Swag & Uniform/Boot Allowance, • On-site Micro-Markets stocked with snacks and essentials, • Discounts on phone plans, supplier vehicles, mobile detailing, tools, and equipment, • Additional partner and vendor discountsPerformance Incentives (Commissions, Bonuses & Profit Sharing) At PTR, we believe in rewarding success. Certain roles offer commission structures, bonuses, or profit-sharing opportunities based on performance. Incentive eligibility varies by position, so be sure to ask your recruiter about the compensation opportunities available for your role. Comprehensive Benefits — Starting Day One ✔ Premium healthcare coverage (medical, dental, vision, mental health & virtual healthcare) ✔ 401(k) matching and long-term financial planning support ✔ Paid time off so you can recharge ✔ Life, accidental death, and disability coverage ✔ Ongoing learning and development opportunities Training, Growth & Recognition We partner with the Predictive Index behavioral assessment tool, which helps identify natural behavioral drives such as dominance, extraversion, patience, and formality. This tool supports hiring decisions, team development, and employee engagement throughout the entire employee lifecycle. Culture & Connection — More Than Just a Job At PTR, we don't just build relationships with our customers—we build them with each other. Our tech-forward, highly collaborative culture is rooted in our core values. Connect and engage through: ✔ PTR Field Days & Team Events ✔ The Extra Mile Recognition Program ✔ PTR Text Alerts & Open Communication Employment Classification Premier Truck Rental hires full-time, part-time, contractor, and intern positions, depending on business needs. Benefits eligibility varies by employment classification. Contractors, interns, and part-time employees are not eligible for the full-time employee benefits package. Equal Opportunity Employer Premier Truck Rental is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law

Job DescriptionBenefits: • Bonus based on performance, • Paid time off, • Training & development Home Work Renovation is a boutique, high-end residential renovation company. The owners/partners of the company are both highly experienced carpenters and builders with a combined 50+ years of experience in many different aspects of construction/renovation and project management. We love to share our knowledge and teach others via the projects we build together. We are a rapidly growing company working on several active projects in Brooklyn and Manhattan. We are seeking a High-End Rough + Finish Carpenter / Renovation Specialist with 10+ Years of Experience to work side-by-side with us. We work on a wide range of Projects including Custom Bathroom & Custom Kitchen Renovations, Full Apartment Renovations & Full Townhouse/Brownstone Renovation projects. We are looking for a reliable, responsible, efficient carpenter whose confident, has a positive/humble attitude, and is looking for long term growth. Requirements: • Must be a U.S. citizen OR have a work authorization card., • Able to autonomously foresee problems, come up with a viable solution and be able to work alone or with a team., • Pictures of past work required., • Must provide references., • Preferred but not required 40 hrs OSHA., • Able to perform various manual and skilled labor tasks including but not limited to flooring, framing, trim and various other carpentry., • Ability to lift at least 50 lbs. safely without any concerns., • Must be highly motivated, consistently punctual and able to accomplish tasks with a positive/humble attitude., • Must have proficient verbal and written communication skills., • Must have experience with high-end millwork installations., • Proficiency in reading plans., • Must be competent with email, text message and company communications/software., • Able to manage a project and keep said project on schedule on a daily basis., • Must have personal tools., • Able to comfortably take the lead when needed.

Job DescriptionCOMPANY OVERVIEW We are a premier high-end residential construction company specializing in luxury residential projects in New York and California. For over three decades, I-Grace has been recognized for our exceptional craftsmanship, innovative design, and unwavering commitment to delivering the highest quality for our discerning clients. Join our team to lead prestigious projects and make a lasting impact on the future of luxury design. At I-Grace, we value top talent and provide a supportive, collaborative environment that fosters professional growth. We offer competitive compensation, comprehensive benefits, and ample opportunities for career development. Our leadership team has grown from within, and we take pride in developing the next generation of project leaders. POSITION OVERVIEW We are seeking a highly skilled Finish Carpenter with experience in luxury residential construction to join our team. This role is ideal for a craftsman who takes pride in precision, detail, and white-glove execution within occupied, finished homes. You will be responsible for delivering exceptional finish work, including millwork, hardware installation, and fine carpentry, while maintaining the highest standards of professionalism in client-facing environments. This is a hands-on role requiring technical expertise, strong judgment, and the ability to operate seamlessly in high-end, furnished residences. KEY RESPONSIBILITIESCRAFTSMANSHIP & EXECUTION • Execute high-end finish carpentry, including trim, moldings, cabinetry, and custom millwork, • Install and adjust premium hardware and finish materials with precision, • Perform detailed layout work and interpret blueprints accurately, • Maintain exceptional quality standards aligned with luxury residential expectationsSITE PROFESSIONALISM, • Work effectively in occupied, finished, and furnished residences, • Maintain a clean, organized, and respectful job site at all times, • Communicate professionally with team members, supervisors, and clientsTOOLS & PERFORMANCE, • Operate hand tools and power tools with advanced proficiency, • Maintain personal tools and ensure safe working condition, • Plan and execute daily work efficientlyREQUIREMENTS, • 2 – 5 years of experience in high-end / luxury residential construction, • Proven expertise in finish carpentry, millwork, and hardware installation, • Cabinet-making experience preferred, • Ability to read blueprints and perform layouts, • Experience working in occupied, high-end residential environments, • Driver’s License a plus, • A Background check, Drug screening and References will be requiredCERTIFICATIONS & TRAINING, • OSHA 30-Hour, • SST Card (Blue) Eight Hour Fall Prevention Training, Two Hour Drug and Alcohol Awareness Training, • 4-Hour Supported Scaffold Certification, • Must complete within 90 days of hire:, • Scaffolding Training, • Asbestos Awareness, • Lead Awareness, • Mold Awareness, • Silica AwarenessTECHNICAL SKILLS, • Proficiency in Microsoft Office Suite (preferred), • Experience with Microsoft Project (preferred)WORK ENVIRONMENT While performing the duties of this role, the employee is frequently exposed to: • Fumes, airborne particles, and moving mechanical parts, • Vibrations and loud construction environments, • Outdoor conditions including heat, humidity, and inclement weather The position regularly involves working: • Near active construction equipment, • In finished residential environments, • In conditions with dust, noise, and site activityPHYSICAL DEMANDS This role requires the ability to: • Lift, push, pull, and carry heavy materials, • Stand and walk for extended periods, • Perform strenuous physical labor under field conditions, • Maintain strong stamina and endurance Additional requirements include: • Excellent manual dexterity and coordination, • Ability to move quickly and safely on active job sites, • Sustained use of core strength for lifting and stabilityWHY JOIN US, • Work on premier luxury residential projects, • Be part of a team committed to craftsmanship, integrity, and excellence, • Opportunity to grow within a high-performance construction environment If you are a detail-driven finish carpenter who thrives in high-end environments and takes pride in delivering exceptional work, we encourage you to apply. EQUAL OPPORTUNITY STATEMENT We are committed to providing equal employment opportunities and maintaining a professional, respectful, and inclusive workplace in alignment with company policies. Powered by JazzHR HJ9boQu7P5

Job Description Job Description We are seeking a highly organized, detail-oriented, and proactive individual to join our team. This role is essential to ensuring our projects move forward efficiently by navigating permitting and approval processes, assisting with bids and proposals, coordinating with suppliers and subcontractors, and supporting projects from the bidding stage through contract execution. Key Responsibilities Permitting & Project Coordination • Complete and submit permit applications both electronically and in person., • Review project plans to identify and apply for all required permits., • Track and follow up on permit applications to ensure timely approval., • Coordinate with project managers, engineers, and architects to gather documentation and resolve permitting issues., • Stay informed on changing regulations and permit requirements., • Visit local agencies and job sites as needed to obtain permits or meet with stakeholders., • Perform administrative tasks, maintain accurate records, and ensure all internal logs are up to date., • Conduct due diligence, create permit checklists, and assist in preparing job folders., • Monitor and report on changes to project timelines and statuses. Bidding & Estimating • Review bid invitations, bid specifications, drawings, plans, and project requirements., • Prepare material and labor takeoffs and assist in developing accurate project estimates., • Contact suppliers and subcontractors to obtain pricing, availability, lead times, and quotes., • Compare and evaluate supplier and subcontractor quotes to ensure competitive and accurate pricing., • Request updated pricing and verify that quotes meet project specifications., • Identify scope requirements, exclusions, allowances, and potential project risks., • Assist with preparing and submitting competitive bids by required deadlines., • Maintain organized bid files, pricing records, supplier quotes, and bid documentation., • Follow up on submitted bids and maintain a tracking system for bid status and results., • Prepare professional project proposals based on bid documents, takeoffs, pricing, and scope of work., • Review proposals to ensure all labor, materials, equipment, subcontractors, permits, and other project costs are properly accounted for., • Prepare scope-of-work descriptions, exclusions, inclusions, terms, and conditions for proposals., • Assist with preparing, reviewing, and organizing contracts, purchase orders, subcontractor agreements, and related project documentation., • Coordinate contract execution and ensure required documents, signatures, certificates, and insurance information are collected., • Maintain accurate records of proposals, contracts, purchase orders, and related correspondence., • Assist management with contract modifications, change orders, and other project documentation as needed. Qualifications • Strong administrative, organizational, and multitasking skills., • Excellent oral and written communication skills., • Proficiency in Microsoft Office Suite (Word, Excel, Outlook, etc.)., • Ability to read and understand construction plans, specifications, and project documents., • Strong attention to detail, particularly when reviewing drawings, specifications, quantities, and pricing., • Highly organized, detail-oriented, and deadline-driven., • Self-motivated with the ability to work independently and as part of a team., • Ability to manage multiple bids, permits, proposals, and projects simultaneously., • Comfortable working in a fast-paced construction environment., • Prior experience in construction estimating, bidding, takeoffs, permitting, project coordination, or working with contractors is preferred.

Job Description Position Summary Reporting directly to the Director of Talent Development and Workforce Innovation, the Job Developer will develop employer partnerships with employers who will afford OBT program participants the opportunity to apply for open positions. The Job Developer is expected to enter the position with a number of these partnerships already in hand and to develop additional partnerships that speak to the interest of OBT participants and the sectors in which the organization provides credential training: technology, construction, and health care. The Job Developer will work to prepare participants for these interviews, including resume development, cover letter development, and interviewing skills. Essential Job Functions and Responsibilities • Engage in biweekly employment services meeting and meetings with key youth employment staff from each youth employment program in order to share job orders, discussed work readiness preparation activities, provide feedback relative to job readiness, etc., • Conduct comprehensive intakes and assessments on participants designed to evaluate employment history, education, skills, qualifications, support service needs and vocational interests., • Prepare participants individually and in groups relative to job searching skills, resume writing, application completion, and interview readiness for job orders., • Complete weekly data entry, including but not limited to case notes, new intakes, employment verifications, etc., • Design and create recruitment strategies, such as hiring events and on-site employer events., • Assist in identifying and developing services and programs not currently being offered. Knowledge, Skills and Abilities • Possess a comprehensive job bank (Tech, Retail, Hospitality, Construction, and/or Healthcare) and the ability to leverage relationships with employers to meet the employment needs of OBT's client base., • Experience working directly with people from diverse racial, ethnic, and socioeconomic backgrounds., • A passionate commitment to OBT's mission and vision., • A track record tied to exceptional success in preparing individuals for entry into and persistence in both subsidized and unsubsidized employment. Preference given to those applicants with a cadre of employer partners already committed to working with them., • Knowledge of New York City labor market trends and employer-based tax incentives., • The ability to establish strong working relationships with team members, colleagues, participants, and external stakeholders., • Strong skill set in data management and data tracking; demonstrated experience managing data collection, analysis, and reporting., • Spanish or French language proficiency preferred. Education and Experience/Training • High School Diploma required, BA preferred, • A minimum of 3 years' experience in job development, workforce development, business development, marketing, or recruiting Salary: $60,000–$65,000 Powered by JazzHR 0nn1tXQCdn

This Jobot Job is hosted by: Jeremy Lee Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $100,000 - $150,000 per year A bit about us: We are a leading concrete contractor with roots dating back to the mid-1990s, founded by a group of professionals focused on creating stable, close-to-home careers in concrete construction. Over nearly three decades, we have grown into one of the leading concrete contractors in the nation. We consistently rank at the top among industry peers and have been recognized multiple times as a Best Company. Our culture emphasizes technical excellence, innovation, safety, and work-life balance, making us a preferred employer for professionals seeking both challenge and stability in the construction industry. Why join us? • Competitive pay ($100k-$150k+ depending on experience), • Bonus opportunities, • Health, dental, and vision insurance, • Paid time off/ Holidays, • 401(k) with company match Job Details We are seeking a skilled Concrete Estimator to join our team in the DC-Baltimore area. In this role, you will be responsible for preparing detailed and accurate estimates for structural concrete projects, including quantifying scope, analyzing alternates, and coordinating vendor and subcontractor pricing. You will work closely with project managers, engineers, and operations teams to ensure estimates are comprehensive and competitive. This position offers the chance to contribute to a company poised for significant expansion while enjoying stability, career support, and opportunity within a leading specialty contracting firm. Responsibilities: • Prepare detailed and accurate estimates for structural concrete projects, • Identify and quantify all necessary concrete scope, including alternates and general conditions, • Input correct vendor and subcontractor pricing and labor costs, • Collaborate with project managers, engineers, and operations teams to ensure estimates are comprehensive, • Analyze project requirements and provide recommendations for cost-effective solutions, • Maintain and update estimating databases and records, • Support bidding efforts by providing timely and accurate estimates Qualifications • 5+ years of experience in structural concrete estimating for large-scale self-perform General Contractors or concrete contractors, • Strong knowledge of concrete construction methods, materials, and industry standards, • Proficiency with estimating software and construction management tools, • Excellent analytical, communication, and problem-solving skills, • Ability to work independently and as part of a team, • Bachelor’s degree in Construction Management, Engineering, or related field preferred Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description:\n\nDOT Construction is seeking an experienced, hands-on Working Workshop Lead to oversee daily operations within our construction workshop and fabrication area while actively working alongside the crew. This is a working leadership position. The Workshop Lead is expected to remain on the tools, lead by example, lay out work, fabricate components, review drawings, train craftsmen, solve fabrication issues, inspect finished products, and ensure that everything produced in the workshop meets DOT Construction quality standards. The Workshop Lead will coordinate daily shop production, manpower, materials, tools, equipment, fabrication sequencing, quality control, safety, housekeeping, inventory, and preparation of completed work for delivery to active construction projects. The ideal candidate understands how to build high-quality work and how to lead others in producing it consistently. Hands On Workshop Leadership Lead the Shop From the Floor Take ownership of daily workshop operations and ensure fabricated products are completed safely, accurately, efficiently, and to a professional commercial-construction standard. Be a Working Lead Work alongside the crew and participate directly in the production activities required to meet project schedules and quality expectations, including: · Construction layout and measurement · Cutting, fitting, fabrication, and assembly · Finish carpentry, cabinetry, millwork, and architectural woodwork · Metal fabrication and miscellaneous steel work where applicable · Drilling, fastening, hardware installation, sanding, and surface preparation · Specialty construction assemblies, mockups, prototypes, and prefabricated field assemblies · Repairs, modifications, punch-list corrections, and preparation for field installation Lead by Example Set the standard for craftsmanship, accuracy, productivity, professionalism, safety, organization, cleanliness, material care, tool care, and accountability. The Workshop Lead should not accept work that fails to meet the approved drawings or DOT Construction quality standards. Craftsmanship and Quality Control Build It Right Before It Leaves the Shop DOT Construction expects a high level of craftsmanship from every product fabricated within the workshop. Quality must be maintained throughout the fabrication process, not checked only after production is complete. The Working Workshop Lead will establish and maintain a shop culture in which craftsmen take pride in the finished product. Responsibilities include: · Review drawings, details, and approved submittals before fabrication begins. · Verify dimensions before materials are cut and confirm field dimensions when required. · Verify material type, thickness, grade, finish, grain, and orientation. · Establish and enforce fabrication tolerances. · Check squareness, level, plumb, alignment, fit, joint quality, and consistent reveals. · Verify fastener type, spacing, placement, and attachment methods. · Inspect exposed finished surfaces and prevent scratches, dents, chips, gouges, poor cuts, glue residue, and excessive weld marks. · Verify hardware placement and confirm completed assemblies operate correctly. · Check finished dimensions before shipment and require immediate correction of deficient work. · Protect completed products from damage and perform a final quality-control inspection before release to the field. Nothing should leave the DOT Construction workshop unless it is ready to be installed and presented to the owner, architect, or client with confidence. Construction Drawing and Shop Drawing Review Know What You Are Building Before Cutting Material The Working Workshop Lead must be comfortable reading and interpreting construction information, including: · Architectural and structural drawings · Interior elevations, wall sections, and construction details · Finish, door, and hardware schedules · Millwork, shop, and fabrication drawings · Manufacturer instructions and approved product data · Submittals, RFIs, addenda, field sketches, and project specifications · Verified field dimensions and installation requirements The Workshop Lead must compare drawings, measurements, materials, and fabrication requirements before materials are cut or assemblies are built. When information appears incomplete, conflicting, or incorrect, follow this process: · Stop the questionable fabrication before material is wasted. · Verify the drawing, detail, field condition, or dimension. · Document the discrepancy clearly. · Notify the Project Manager or Superintendent. · Obtain direction or clarification before proceeding. · Resume fabrication after the requirement is understood and documented. The Workshop Lead is expected to identify problems before they become wasted material, rework, schedule delays, or field installation problems. Production Planning and Workflow Know What Needs to Be Built Next The Working Workshop Lead must understand what the crew is building today and what will be required over the coming weeks. Responsibilities include: · Review upcoming fabrication requirements and approved production information. · Establish daily and weekly production goals. · Prioritize fabrication according to project schedules and field installation needs. · Coordinate regularly with Project Managers and Superintendents. · Determine manpower needs and assign work according to employee skill level. · Confirm required materials, approved drawings, and field dimensions are available. · Identify long-lead materials and production constraints early. · Sequence fabrication, finishing, staging, and delivery efficiently. · Develop recovery plans when production begins falling behind. · Prevent field crews from waiting on shop-fabricated materials whenever reasonably possible. A successful Workshop Lead should understand tomorrow's workload and prepare the crew, materials, tools, and information required to execute it. Crew Leadership and Training The Working Workshop Lead will supervise craftsmen, helpers, laborers, and other employees assigned to the workshop. Responsibilities include: · Assign daily work and explain fabrication requirements clearly. · Demonstrate proper construction and fabrication techniques. · Train less experienced employees and develop their ability to work independently. · Inspect work during fabrication and correct poor workmanship immediately. · Establish reasonable production expectations and monitor employee productivity. · Teach proper tool usage and reinforce safe work practices. · Maintain professional conduct and accountability throughout the shop. · Identify employees capable of taking on greater responsibility. The Workshop Lead must be capable of teaching the work as well as performing it. When an employee does not understand how an item should be built, the Lead should demonstrate the correct method. Material Management Treat Materials Like Company Money Material waste directly affects project profitability. The Working Workshop Lead will maintain control of shop materials and ensure employees use them responsibly. · Review material requirements and quantities before fabrication. · Coordinate purchasing needs with Project Management. · Inspect incoming materials for damage, conformity, and usable condition. · Organize and protect lumber, sheet goods, metals, hardware, finished materials, and specialty products. · Maintain usable remnants when practical and plan cuts to maximize material yield. · Separate damaged, nonconforming, or rejected materials. · Track specialty materials and identify shortages early. · Prevent employees from cutting expensive material before dimensions and requirements are confirmed. Tools and Equipment The Workshop Lead will help maintain accountability for company tools, shop equipment, and fabrication machinery. Equipment may include: · Table saws, miter saws, track saws, circular saws, band saws, and chop saws · Drill presses, routers, sanders, planers, jointers, grinders, and metal-cutting equipment · Welding equipment, compressors, pneumatic tools, and cordless tools · Clamps, layout equipment, levels, lasers, jigs, and specialty fabrication equipment · Forklifts, pallet jacks, ladders, portable lifts, and other material-handling equipment Responsibilities include maintaining tools in safe operating condition, keeping machine guards in place, removing damaged tools from service, maintaining organized storage, preventing avoidable loss, coordinating maintenance, tracking consumables, and ensuring employees use the correct tool for each task. Prefabrication and Field Support A major function of the DOT Construction workshop is to support active project teams. The Workshop Lead may oversee fabrication of: · Custom blocking, backing assemblies, wood framing assemblies, and temporary construction components · Architectural trim, millwork, cabinetry, shelving, casework, and finish components · Door and hardware modifications, equipment supports, specialty brackets, and metal frames · Miscellaneous steel items, equipment stands, protective barriers, templates, and jigs · Mockups, prototypes, and project-specific fabricated assemblies Shop fabrication should make field installation faster, cleaner, safer, and more predictable. Completed work must be clearly identified, protected, and prepared for efficient installation. Mockups and Prototypes Before repetitive fabrication begins, the Working Workshop Lead may be required to produce a first-piece assembly, prototype, or mockup to verify: · Dimensions, materials, appearance, fit, and finish · Hardware, attachment methods, fabrication sequence, and installation requirements Once approved, the accepted mockup establishes the quality standard for the remaining production run. Repeated fabrication must remain consistent with that standard. Finish Quality Special attention must be given to items that will remain visible after construction is complete. Finished work should be exhibited: · Straight cuts, clean edges, tight joints, and smooth transitions · Consistent reveals, uniform spacing, proper alignment, and accurate dimensions · Correct fastener placement with minimal exposed fasteners where they are not intended · Professional surface preparation and a clean, consistent finish · Properly installed hardware and correct fit, function, and operation The completed work must withstand close review and reflect professional commercial-construction craftsmanship. Safety Management Maintain a Professional and Safe Workshop The Working Workshop Lead is responsible for maintaining a safe workshop environment. Responsibilities include: · Enforce DOT Construction safety requirements and applicable OSHA standards. · Require proper personal protective equipment and safe machine operation. · Maintain guards, electrical connections, clear walkways, access, and egress. · Control sawdust, sparks, fabrication debris, cords, hoses, and trip hazards. · Maintain safe material stacking, lifting practices, and material-handling operations. · Keep fire extinguishers accessible and store flammable materials correctly. · Remove damaged tools and equipment from service. · Conduct or participate in toolbox talks and correct unsafe conditions immediately. Production goals never justify unsafe work. The Workshop Lead is expected to plan the work so employees can meet quality and schedule requirements safely. Workshop Organization and Housekeeping The condition of the shop reflects the quality and discipline of the company. The Working Workshop Lead will maintain: · Clean workstations and defined fabrication areas · Organized tools, material racks, hardware storage, cords, and hoses · Clear aisles, access routes, exits, and loading areas · Proper scrap disposal and regular removal of waste · Protected finished-product storage and clearly identified staging areas · Orderly storage for ladders, portable equipment, and material-handling devices Housekeeping is part of daily production. Work areas should be reset throughout the day and ready for the next operation. Shipping Staging and Delivery Preparation Before fabricated materials leave the shop, the Working Workshop Lead will ensure they are properly prepared for transportation and field installation. Responsibilities include: · Complete the final quality-control inspection and verify quantities. · Confirm the project destination and installation location. · Label components and match loose hardware to the correct assemblies. · Protect exposed finishes and package items to prevent transportation damage. · Coordinate loading sequence, delivery timing, and field receiving requirements. · Provide applicable installation drawings, templates, or information with specialty assemblies. Products should arrive at the jobsite ready to be installed, with deficiencies corrected before shipment. Communication and Documentation The Workshop Lead will maintain regular communication with DOT Construction Project Managers and field Superintendents regarding: · Daily production status and completed quantities · Upcoming fabrication and delivery requirements · Material shortages, deliveries, and long-lead concerns · Drawing conflicts and outstanding field dimensions · Equipment issues and manpower requirements · Quality concerns, rework, and corrective action · Schedule concerns, change-order fabrication, and delivery readiness · Shop photographs and other required production documentation When a fabrication issue may affect project cost, quality, or schedule, the Workshop Lead must communicate it promptly and provide enough detail for Project Management to act. Extra Work and Change Management The Workshop Lead must recognize when requested fabrication may fall outside the original project scope. When additional work is requested: · Identify and describe the requested work. · Notify the Project Manager before proceeding whenever possible. · Document labor, materials, and equipment used. · Take photographs and maintain fabrication records when appropriate. · Obtain proper direction and track the work to completion. Shop labor and material have value and must be documented accurately. What We Look for inWhy Join DOT Construction in South Texas? \r\nThe South Texas commercial and industrial construction market continues to grow, and DOT Construction has a strong, multi-year project pipeline. We are looking for experienced craftsmen and construction professionals who want a long-term opportunity, steady work, and a defined career path with a growing contractor.\r\n\r\nOur workshop supports field operations by producing high-quality fabricated components, assemblies, architectural finishes, specialty items, and project-specific materials before they are delivered to the jobsite.\r\n\r\nQuality craftsmanship matters at DOT Construction. We are seeking a skilled construction professional who takes pride in producing clean, accurate work and understands that every item leaving the workshop represents the quality of our company.\r\n\r\nWorking in Texas also means zero state individual income tax and a competitive cost of living, providing an excellent opportunity for experienced construction professionals interested in relocating to South Texas.

Utility Superintendent \n Perfetto Contracting is a leader in premier heavy civil construction in the Greater NYC area. Our commitment to this vision keeps us on the cutting edge of technology and protocol so that we can continue to deliver the most important projects in infrastructure. PCC has serviced the tri-state area in sewer, water mains, roadwork and site work for over 39 years. PCC's clients include New York State and City agencies such as DOT, DEP, DDC, DPR, EDC, and SCA among others. \n \n We are currently seeking a qualified Heavy Civil Utility Superintendent to join our team for an exciting and highly visible project. \n The ideal candidate will be responsible for leading the field operations and on-site crews, as well as achieving budget productions, planning/executing work safely and installation of all work to a high-quality standard. To be successful, this candidate should feel comfortable taking on many tasks that require various skills and appropriately prioritize those tasks' completion. \n Responsibilities: \n\n • Thorough understanding and familiarity with utility work, waste/storm water sewer & watermain work.\n, • Familiar with standard Support of Excavation (SOE) methods for different circumstances, along with handling of dewatering means/methods.\n, • Comprehend and administer Perfetto’s corporate safety program which provides for a safe work environment for all self-performed and subcontracted operations.\n, • Scheduling private utilities resources, familiarity experience when working around private utilities (eg: Con Ed, CET items, etc) a plus\n, • Manhole inspections & exploratory test pitting knowledge\n, • Reviewing/Agreeing with inspector on bid item quantities\n, • Mark-out / Utility Survey Layout work for foreman & crew\n, • Ordering & receiving materials with shop / procurement dept\n, • Coordinating labor & equipment need\n, • Generate and/or adopt to Perfetto’s quality requirements and culture; that recognizes the effect of quality on all self-performed operations.\n, • Supervise and direct field foreman and multiple labor crews to ensure productivity, efficient use of materials & equipment, and contractual performance of the project are met; for all self-performed and subcontracted operations. Ability to schedule, plan & coordinate all work.\n, • Fully versed and familiar with all NYC Labor Union rules.\n, • Must be able to provide timely request for material and equipment needs necessary to support work schedule.\n, • Able to manage all self-perform craft on site, including subcontractors as required. General Contracting experience a must.\n\n Education, Certifications & Work Experience: \n\n • Minimum 10 year's heavy civil experience as a Utility Superintendent\n, • Heavy civil experience required\n, • Utility, water/sewer experience required\n, • Knowledge of Local NYC unions required\n, • NYCDDC a plus\n, • OSHA 30 required\n\n \n Knowledge, skills, and abilities \n\n • Thorough knowledge of all aspects of construction (technology, equipment, standard means & methods); owner procedures and standards; company policies, and union jurisdiction, labor agreements.\n, • Must have excellent communication, organizational, supervisory and planning skills required.\n, • Excellent management skills.\n\n Physical Demands \n\n • The employee frequently is required to stand, walk, sit & climb as necessary.\n, • The employee is occasionally required to lift and/or move up to 50 pounds.\n, • At times will be working around large construction equipment, must be safety conscience.\n, • Subject to outside working conditions.\n\n Additional Requirements/Skills \n\n • Team player who understands and supports corporate safety initiatives to ensure a safe work environment.\n, • Valid driver's license with acceptable driving record.\n, • Strong Computer skills.\n\n Base Salary \n $120,000 - $190,000 (varies on experience and other factors) \n We offer a competitive salary commensurate with experience, a comprehensive benefits package, opportunities for training and advancement and a positive work environment in which you can utilize and enhance your professional skills. \n PCC is an Equal Opportunity Employer. \n

Haugland Group, a privately owned Long Island, New York-based civil infrastructure and energy construction company, has an immediate opportunity for a Junior Estimator to join our team. \n \n Eastern Utility Services, a subsidiary of Haugland Group, specializes in trenchless construction, including horizontal directional drilling, tunneling, auger boring, and micro tunneling. \n \n The Junior Trenchless Estimator will support the estimating and preconstruction of trenchless projects by performing quantity takeoffs, reviewing plans and specifications, developing cost estimates, obtaining vendor and subcontractor pricing, and assisting with bid preparation. \n \n This position is remote, with travel to project locations, site walks, and meetings as needed. \n \n At Haugland, we understand that pushing the boundaries of what has been done is essential to developing the infrastructure of tomorrow. The journey won’t be simple, but what gets us there is. At Haugland Group, Our Word is Our Way. We are leaders in building what’s next because we see the path to get there, and we’re setting a new standard of exceptional along the way. \n \n Let’s build together! \n \n Key Functions \n \n\n • Perform labor, equipment, material, and quantity takeoffs from project plans, specifications, geotechnical reports, and contract documents\n, • Assist in preparing cost estimates and bid proposals for trenchless construction projects, including HDD, tunneling, auger boring, and microtunneling\n, • Assist with evaluating trenchless means and methods, equipment requirements, production rates, and project-specific constructability\n, • Obtain and track vendor and subcontractor quotes\n, • Prepare RFQs and assist with managing bid schedules and deadlines\n, • Organize estimate files, bid folders, and supporting documentation\n, • Utilize estimating and project management software, including B2W, HeavyBid, Procore, Excel, and Microsoft Project\n, • Review bid documents for discrepancies, missing information, constructability concerns, and potential project risks\n, • Collaborate with estimators, project managers, engineering, field personnel, vendors, and subcontractors throughout the estimating process\n\n \n Desired Qualifications \n \n\n • 2+ years of estimating, engineering, or construction experience; heavy civil or trenchless experience is a plus\n, • Associate or bachelor’s degree in Construction Management, Civil Engineering, Business Administration, or a related field preferred; equivalent industry experience may be considered\n, • Ability to read and interpret civil drawings, specifications, geotechnical reports, survey data, and construction documents\n, • Basic understanding of heavy civil construction methods, underground utilities, and construction estimating principles\n, • Strong mathematical, analytical, organizational, and problem-solving skills\n, • Strong attention to detail with the ability to maintain accuracy while meeting bid deadlines\n, • Excellent verbal and written communication skills with the ability to work effectively with project teams, vendors, subcontractors, and clients\n, • Proficiency in Microsoft Office, particularly Excel\n, • Experience with HCSS HeavyBid or other estimating software preferred, but not required\n\n \n Why Haugland? \n \n Compensation range for this role is $85,000–$125,000. \n \n At Haugland Group, our benefits are designed to convey company culture and values which have employees at its forefront. \n \n\n • Excellent benefits package including medical, prescription drug, dental, vision, Health Savings Account (HSA), short/long-term disability, and life insurance\n, • 401k with 5% employer match\n, • Employer funded Dependent Care FSA\n, • Potential for annual performance-based raise\n, • Paid Time Off\n, • Paid company observed holidays\n, • Educational and professional advancement opportunities\n, • Frequent company-sponsored events\n, • Relaxed, friendly office\n, • Fast-paced, exciting environment\n\n \n Haugland Group LLC and its operating divisions, affiliates, related entities, and subsidiaries (collectively, “the Company”) do not accept unsolicited resumes from search firms or employment agencies. Unsolicited referrals and resumes are considered property of the Company and therefore, the Company will not pay a fee for any placement resulting from the receipt of an unsolicited referral. Only upon the Company’s written request may preferred vendors may be invited to refer talent for specific open positions. In these cases, a fully executed agreement with the Company must be in place and current. \n \n We are an Equal Opportunity Employer.

Are you an experienced Cost Estimator with a passion for precision and excellence? \n \n We're on the lookout for a skilled professional like you to join our dynamic team. \n \n As a Cost Estimator II, you will prepare budgets, estimates, and pre-bid packages for design and construction projects, ensuring the seamless transformation of plans into reality for our valued clients. In this position, you'll play a crucial part in the accurate and timely preparation of material and labor estimates. Your responsibilities will extend to interacting with vendors, collaborating to compile responsible and precise estimates of costs for projects, all in alignment with the project plans and specifications. \n \n We are committed to fostering a work environment that balances professional excellence with personal well-being. TCT is proud to offer competitive benefits, including a generous PTO and holiday package, and the flexibility of a hybrid work schedule, allowing you to thrive both in and out of the office. \n \n Position Summary \n We are seeking a highly organized, detail-oriented individual who is bright, enthusiastic, and works comfortably in a team environment. You will assist in preparing cost estimates from the conceptual phase through construction documents. This is a great opportunity for an entry to mid-level estimator with an interest in private and public sector architectural and engineering design projects. This career-track position offers numerous opportunities for growth, leadership development, and mentorship with our project management team. \n \n About \n TCT Toscano Clements Taylor (TCT) is an independent, woman-owned small business specializing in cost estimation and project control consulting services for public and private sector projects. With offices in New York City and Washington, DC, we’re proud to work on projects that shape communities both locally and on a larger scale, all while fostering a collaborative and supportive team environment. \n \n At TCT, we combine the reach and capability of larger firms with the personal touch and adaptability of a smaller organization. We value teamwork, continuous learning, and maintaining a healthy work-life balance. \n \n If you enjoy solving challenges, collaborating with like-minded professionals, and taking pride in your work, TCT is the place for you. \n \n Essential Functions \n\n • Estimate Development: Analyze construction drawings, documentation, and relevant data to prepare accurate estimates for time, cost, materials, and labor, subject to review by a Senior Estimator. Support project management by preparing estimates that align with project goals for planning, scheduling, and organizing work.\n, • Cost Analysis and Monitoring: Assess cost-effectiveness by tracking actual costs against initial bids throughout the project lifecycle, providing updates and adjustments as necessary.\n, • Stakeholder Collaboration: Consult with clients, vendors, internal teams, and construction personnel to discuss and formulate estimates, address project concerns, and resolve issues as they arise.\n, • Communication: Maintain clear, professional communication with colleagues, clients, architects, engineers, contractors, and subcontractors to discuss updates, changes, and adjustments to cost estimates.\n, • Information Gathering & Problem-Solving: Take initiative to collect relevant information from various sources, proactively identify potential challenges, and escalate issues to supervisors for resolution.\n\n \n Requirements \n\n • Bachelor's Degree: Bachelor’s degree in engineering, architecture, or construction management preferred.\n, • Experience Requirement: Must have some experience working as a cost estimator, demonstrated through an internship or prior work experience.\n, • Familiarity with Estimating Software: Ability to learn in-house estimating programs such as On-Screen Takeoff, E-Takeoff, MII, and Sage.\n, • Problem-Solving Skills: Excellent problem-solving abilities, with the capability to analyze complex situations and propose effective solutions.\n, • Interpersonal Skills: Strong interpersonal, communication, and presentation skills, enabling effective collaboration with colleagues, clients, and stakeholders.\n, • Technology Proficiency: Proficient in the Microsoft Office suite, particularly MS Excel, for data analysis, reporting, and project management purposes.\n\n \n Why Choose TCT? \n\n • “Small Giant”: We’re large enough to work on exciting projects with renowned firms, but small enough to ensure that design teams can achieve excellence and projects can be built. Engage in diverse and challenging construction projects that will enhance your skills and expertise.\n, • Career Growth: We foster a culture of continuous learning, providing ample opportunities for career advancement. We want to discover the future leaders of our firm.\n, • Team Collaboration: Join a supportive and collaborative work environment where teamwork is celebrated. If you’re ready to bring your expertise to a firm that values precision, innovation, and people, we’d love to hear from you. Apply now and discover how you can grow with TCT! The above statements are intended to describe the essential job functions and level of work performed by individuals assigned to this classification. They are not to be construed as an exhaustive list of all duties performed by personnel occupying this position.\n\n \n About Toscano Clements Taylor LLC \n Toscano Clements Taylor, LLC (TCT) is an independent, certified women-owned small business providing advisory project controls consulting services, specializing in precise cost estimation and management, planning and scheduling, and risk management. We have a diverse staff of over 60 professionals, including Quantity Surveyors, CPM Schedulers, and a Cost Estimating team consisting of mechanical, electrical, civil, architectural, and structural trade cost experts. \n \n TCT prides itself on providing the cost data our clients need to make financially sound decisions. With in-depth expertise in Cost Planning and Estimating, CPM Scheduling, Document Controls, Risk Analysis, Earned Value Management, Life-Cycle Cost Analysis, and Phasing and Bid Alternates, we are committed to reducing unforeseen expenses, accurately tracking budgets, and exceeding expectations for quality, precision, and on-time project completion.

Our client is looking to add a Senior Commercial Liability Claims Consultant with strong New York Labor Law experience to manage and provide claims oversight for complex exposures. This person would be responsible for overseeing, identifying, evaluating, and mitigating commercial liability exposures while partnering with clients, carriers, and internal stakeholders to ensure effective risk management strategies are implemented across a broad range of industries. The ideal candidate will be well-versed in handling or overseeing construction-related general liability claims (premises liability, NY Labor Law) and reside within commutable distance to the New York City area. \n \n\n • Manage and oversee Commercial General Liability risk management programs for middle market to large commercial accounts.\n, • Analyze client operations, exposures, and loss trends to develop proactive risk mitigation strategies\n, • Conduct risk assessments, policy reviews, and coverage analysis to identify gaps and recommend solutions.\n, • Collaborate with underwriting, claims, and broker teams to improve account performance and reduce loss frequency/severity.\n, • Review and monitor claims activity and provide guidance on complex liability matters.\n, • Develop and deliver client presentations, training materials, and safety recommendations.\n, • Assist with contract reviews, certificates of insurance, and compliance requirements.\n, • Maintain strong relationships with clients, carriers, attorneys, and third party vendors.\n, • Ensure compliance with regulatory requirements and company best practices\n\n \n Requirements \n\n • 5 - 10+ years of Commercial General Liability claims, risk management, or brokerage experience\n, • Well versed in managing complex NY Labor Law is desired\n, • Strong knowledge in coverage analysis and risk transfer principle\n, • Experience working with middle market and/or large commercial account\n, • Excellent verbal and written communication skills with the ability to present to clients and executive leadership\n, • Construction and Contractor insurance knowledge highly preferred\n, • Strong analytical, organizational, and negotiation skills\n, • Bachelor’s Degree preferred\n, • Professional designations such as ARM, CPCU, or CRM are a plus\n\n \n Salary/Benefits \n\n • $115,000 - $135,000 annually depending on experience plus 10-20% bonus\n, • Growth opportunity with an established organization\n, • Generous PTO and paid holiday\n, • Professional development and advancement opportunities\n

Claims Manager \n Property and Casualty Insurance \n Kings County, NY \n \n Description: \n Risk and Claims Management - expanding our team! A specialized risk management brokerage and safety consulting firm is in search of a claims professional with experience to oversee active claims for clients. This role involves managing and monitoring the activities of third-party administrators and ensuring the proper handling of claims until they are settled and closed. The position serves as the primary advocate for general liability claims, facilitating relationships among the employer, insurance provider, and defense counsel for ongoing claims. The candidate will review and supervise the work of insurance adjusters on general liability claims, focusing on the quality of investigations, accuracy of reserves, litigation strategies, and settlement authority. The individual will analyze general liability claims to evaluate coverage, liability, and potential damages. Responsibilities also include coordinating vendor referrals for investigations, surveillance, expert engagement, and litigation management. The position requires tracking and reporting on the adequacy of reserves, claim trends, and loss developments related to the client's general liability portfolios. The claims professional will prepare summaries for clients and offer strategic recommendations for individual cases. They will identify opportunities for subrogation and recovery, including claims for contributions and the enforcement of contractual indemnification. Collaboration with the workers' compensation team will be necessary to address overlapping exposures. The role includes participating in the development of standard operating procedures for managing general liability claims. \n \n Requirements: \n Applicants should have one to three years of experience in handling general liability or bodily injury claims, whether on the insurance carrier, TPA, brokerage, or self-insured employer side. A solid grasp of liability analysis, damage evaluation, and reserve setting is essential. Strong skills in written and verbal communication are required as the candidate will be responsible for drafting claim summaries, client reports, and regular correspondence with adjusters. The candidate must be capable of working autonomously with minimal oversight in a small firm setting and should be comfortable with client interaction from the outset. Experience with general liability claims related to construction, including premises liability, construction defects, and Labor Law, is highly regarded. Familiarity with New York Labor Laws 200/240/241(6) (Scaffold Law) is also preferred. Experience with OCIP/CCIP wrap-up programs, disputes involving additional insureds, or scenarios involving subcontractor defaults is valuable. Multi-state claims experience across New York, New Jersey, Pennsylvania, Florida, and Nevada is advantageous. A bachelor's degree or relevant professional designations such as AIC, CPCU, or ARM are required.

About the Company \n \n At Harrison Green, we create landscapes that enrich daily life, foster connection, and bring enduring beauty to the places people call home. Our work spans city rooftops, townhouses, country estates, hospitality environments, and boutique commercial projects, each approached with the same commitment to thoughtful design, meticulous execution, and long-term stewardship. \n \n Operating out of our custom-retrofitted, light-filled commercial studio in Brooklyn, we have built a growing enterprise that has spent over a decade transforming the city's skyline. Because we operate in an ultra-luxury, highly customized design-build envelope, our commercial success relies on our ability to price complex creative concepts with analytical precision before construction begins, while maintaining complete visibility over project-level and department-level profitability. \n \n To bridge our creative vision with commercial performance, we are seeking a highly analytical Head of Commercial Estimating & Analytics. Reporting directly to the Chief Financial Officer, this individual will serve as the primary analytics engine of our project pipeline. You will lead end-to-end project cost estimation, partner with installation teams on subcontractor financial structures, perform "estimated vs. actual" post-project financial assessments, and oversee firm-wide KPI performance analytics to protect profit margins and drive sustainable growth. \n \n Responsibilities: \n \n Project estimating & client pricing \n\n • End-to-End Budgeting: Build comprehensive, line-item construction and design budgets for upcoming projects, modeling internal labor hours, trade subcontractor hours, materials, and NYC urban logistical fees.\n, • Creative Alignment: Partner closely with Design & Installation teams during schematic and construction documentation phases to ensure complex creative concepts are accurately captured in project budgets before client presentation.\n, • Proposal & Pitch Assembly: Apply strategic firm markups to generate clear, professional client proposals during competitive pitches and contract assemblies.\n, • Billing Alignment: Collaborate with Bookkeeping during active project phases to track billing milestones, document financial progress, and ensure project cash flow aligns with contract terms.\n\n \n Commercial Procurement support & subcontractor financials \n\n • Subcontractor Financial Structuring: Partner with the Director of Installation (who leads vendor/subcontractor relationships and vetting) to calculate required subcontractor target pricing and markups. Help Installation Managers draft performance-based subcontractor agreements aligned with firm profit targets.\n, • Master Pricing Library: Maintain and continuously update the firm’s central Vendor & Material Price Library, ensuring estimating formulas reflect live market pricing, inflation, and trade discounts.\n, • Supply Chain Feedback Loops: Feed real-world market pricing, supply chain bottlenecks, and material availability data back to Design and Estimating teams to keep future pitches grounded in realistic lead times and costs.\n\n \n Business analytics & KPI governance \n\n • Variance & Post-project Analytics: Lead post-project "Estimated vs. Actual" financial reviews to refine predictive pricing models, identify cost overruns, and eliminate hidden margin erosion.\n, • Departmental Profitability: Conduct regular financial analytics evaluating revenue growth, direct gross margins, and operating profitability at the departmental level (Design, Installation, Maintenance), delivering actionable insights to executive leadership.\n\n \n Required Skills \n \n\n • Education: Bachelor’s Degree in Business, Finance, Economics, Construction Management, or a related quantitative field is required. An MBA is highly preferred.\n, • Analytical Capability: Advanced proficiency in financial modeling, Excel/Google Sheets dataset analysis, and construction cost-estimation software.\n, • Industry Experience: 3–7+ years of progressive experience in commercial management, cost estimating, financial variance analysis, or business analytics—with experience in architecture, luxury design-build, general contracting, or commercial construction strongly preferred.\n\n \n Preferred Skills \n \n\n • Senior Analyst Background: Experience serving as a Senior Business Analyst, Financial Analyst, or Commercial Manager handling project P&Ls, cost-estimating databases, and executive performance dashboards.\n, • Urban Logistics Awareness: Familiarity with operations in New York City or dense metropolitan markets, understanding the specific logistical and pricing nuances of urban luxury projects.\n, • Cross-Functional Communication: Proven ability to collaborate effectively with creative designers, field managers, and executive leadership, translating technical data into clear financial recommendations.\n\n \n Equal Opportunity Statement \n \n We are committed to diversity and inclusivity. \n

Attorney — Construction Litigation Associate Manhattan, New York, NY | Full-Time | $115,000–$160,000 Position Overview Our client's Construction Litigation practice is on an upswing, and they're bringing on an Associate in Manhattan to grow with it — this is genuinely a hiring-for-growth seat, not a replacement for someone who left. The group handles construction disputes, Labor Law defense matters, and defect/property damage claims, work that rewards precision and a real grasp of the statutory landscape unique to construction litigation in New York. You'd be in depositions and court appearances early, advising clients directly on strategy and coverage questions, and drafting the pleadings and discovery work this kind of litigation runs on, where getting the details right actually matters to outcomes. Like the firm's other litigation seats, there's an expectation you can respond when something urgent comes up — a serious incident, a client needing guidance fast — so some flexibility beyond a typical 9-to-6 caseload is part of the deal. For someone who wants to specialize and grow alongside a practice that's actively expanding, rather than settle into a seat someone else built, this is a strong landing spot. What You'll Be Doing Appearing at depositions, court dates, and handling motion practice in state and federal court Advising clients directly on litigation strategy, risk, and insurance coverage questions tied to their matters Drafting pleadings, discovery requests, and other filings with the precision this work demands Partnering with colleagues and partners to build out case strategy and deliver strong client service Stepping up when something urgent hits — meeting clients directly and getting a defense strategy moving fast Bringing initiative and good judgment to the group's broader reputation for quality work What You Bring A J.D. from an accredited school, strong academics behind it Admission to the NY Bar (must-have); NJ Bar is a nice-to-have 2+ years litigating, ideally with some construction or Labor Law defense exposure, plus property damage matters Clear, confident communication — written and verbal — especially on complex issues Solid judgment and problem-solving instincts A proactive, resourceful streak and genuine care about quality work Someone who works well with others and carries themselves professionally with clients

Job DescriptionBenefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Vision insurance Position Overview: CAFCO Group seeks an Assistant Project Officer Level I to support school construction management projects on behalf of the New York City School Construction Authority (SCA). Under direct supervision of a Project Officer, the successful candidate will apply project management principles while learning SCA practices in the delivery of capital construction projects across New York City public schools. Required Qualifications: · Baccalaureate Degree from an accredited college or university with a major in Architecture, Construction Management, Engineering, Environmental Services, or a related field · Valid New York State driver's license required · Working knowledge of personal computers and standard software programs · Strong organizational skills with attention to detail · Ability to work effectively in a team environment under direct supervision · Excellent written and verbal communication skills Key Responsibilities: · Under direct supervision of a Project Officer, apply project management related principles while learning SCA practices and procedures · Assist in preparing activity schedules and reviewing consultant proposals, including scope of work, staffing charts, labor cost charts, and cost estimates, checking for inconsistencies and errors · Maintain management information systems to provide data for the planning and control of project development · Assist in the process of investigation and resolution of design and construction issues · Review design documents, change orders, punch lists, payment requisitions, and contracts · Gather information to be used in job status reports · Visit various job sites as required in the performance of assigned duties · Assist in ensuring quality and high standards of contract performance and compliance in both design and construction · Perform other related tasks as assigned Work Environment: · Professional office and field environment · Construction industry focus — NYC public school capital projects · Fast-paced, dynamic workplace across all five boroughs Benefit Package: · Paid PTO: 120 hours (3 weeks) · 8 Paid Holidays · Health, vision and dental insurance · 401K · Pre-tax benefits You can also visit our website https://cafcogroup.com/ click on Join Our Team tab and fill out Form Equal Employment Opportunity Statement: Equal Employment Opportunity Statement: "CAFCO Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, or any other characteristic protected by law. As a certified M/WBE firm, we are committed to fostering a diverse and inclusive workplace while maintaining compliance with all federal, state, and local equal employment opportunity laws and regulations. CAFCO Group participates in E-Verify and performs background checks in accordance with NY Article 23-A and applicable laws." CAFCO Group is not sponsoring visa H-1B at this time

Job Description Local 3 Long Island Electrical contractor- seeks experienced Project Managers for their growing business to work from the job site on the Upper West Side of Manhattan- Fire alarm and power - 3/4”-1”galvanized conduit for power and Fire Alarm system for one project they also have DEP waste water treatment work that involves heavy commercial infrastructure. The Electrical Project Manager is responsible for planning, coordinating, and overseeing electrical construction projects from inception through completion. This role ensures projects are completed safely, on time, within budget, and in accordance with company standards, client requirements, and applicable electrical codes. Key Responsibilities: • Manage all phases of electrical construction projects, including planning, scheduling, budgeting, and execution., • Develop project schedules and coordinate labor, materials, equipment, and subcontractors., • Monitor project progress, costs, and productivity to ensure profitability., • Review project drawings, specifications, and contracts to ensure compliance., • Communicate regularly with clients, engineers, architects, general contractors, and field personnel., • Prepare and submit project documentation, including RFIs, change orders, submittals, and progress reports., • Conduct site visits to monitor quality, safety, and adherence to project schedules., • Ensure compliance with OSHA regulations, NEC requirements, and company safety policies., • Resolve project issues, delays, and conflicts in a timely and professional manner., • Lead project meetings and provide direction to field supervisors and project teams., • Support estimating and preconstruction activities when required., • Manage project closeout, including punch lists, final documentation, and customer turnover.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Competitive salary, • Dental insurance, • Health insurance, • Opportunity for advancement, • Paid time off, • Vision insurance About the Job We currently have an opening for a Superintendent / Field Leader within our PM/CM group in New York City. We are seeking an experienced construction professional to oversee day-to-day site operations on a major NYC public realm / streetscape project. The ideal candidate will be responsible for managing field activities, coordinating subcontractors and utilities, and ensuring work is executed safely, efficiently, and in compliance with agency requirements. Key Responsibilities Project & Site Coordination • Organize, schedule, and oversee daily and weekly activities of subcontractors, vendors, and utility entities, • Coordinate work in active urban environments, including NYC utility companies and agency stakeholders, • Proactively identify and resolve field issues to maintain schedule and productivity Record-Keeping & Supervision • Maintain accurate daily reports, field logs, and site documentation, • Track labor, timekeeping, and cost-related field activities, • Supervise self-performed work and implement efficient construction means and methods Material & Submittal Management • Support submittal reviews and track long-lead materials, • Oversee material deliveries and ensure proper inspection, documentation, and storage, • Verify receiving tickets are signed, coded, and properly filed Reporting & Compliance • Support jobsite reporting requirements including daily reports, RFIs, change orders, weekly unit reports, two-week look-ahead schedules, and monthly schedule updates, • Review shop drawings and submittals in coordination with project management teams, • Ensure compliance with contract documents, agency standards, and company procedures Meetings & Quality Control • Attend and participate in required jobsite and agency meetings, • Maintain quality control and safety standards throughout all phases of construction Qualifications Education • Bachelor’s degree in Engineering, Construction Management, or a related field preferred Experience • 7+ years of relevant field experience on urban infrastructure, streetscape, or public works projects, • Experience working on NYC DDC and/or EDC projects strongly preferred, • Demonstrated experience with NYC utility coordination and work in active public rights-of-way, • Familiarity with NYC agency processes, filings, and construction requirements =

Job DescriptionPosition SummaryWe are seeking an experienced Conventional Dredge Operator for a potential long-term, full-time position. This opportunity is not tied to a specific project; we are hiring qualified candidates to support current and future assignments at various locations.The operator will be responsible for the safe and efficient mobilization, operation, assisting in general maintenance, and demobilization of dredging equipment. The ideal candidate has strong mechanical aptitude, basic Hypack knowledge, works effectively both independently and as part of a crew, and is willing to travel.Primary Responsibilities · Safely operate dredging equipment in accordance with project requirements and company procedures. · Mobilize, set up, operate, and demobilize dredging equipment. · Direct or assist crew members with placing shore anchors and cables. · Direct or assist with assembling, positioning, and laying pipe. · Verify dredge cuts. · Monitor depth gauges and other equipment to maintain the required excavation depth. · Perform daily equipment inspections and report mechanical or safety concerns. · Assist with equipment maintenance and troubleshooting. · Maintain a clean, organized, and safe jobsite. · Follow all company policies, safety procedures, and supervisor instructions. · Report to the project foreman and superintendent. Requirements · Previous dredge-operating experience. · Valid driver's license. · Authorization to work in the United States. · Ability to pass a background check and drug screening. · Ability to complete tasks with or without direct supervision. · Willingness to travel. · Availability to work out of town for extended periods, including weekends and holidays. · Ability to work approximately 75 hours per week, rotation-based. · Strong commitment to workplace safety and teamwork. Preferred Qualifications · Mechanical knowledge and equipment-maintenance experience. · Experience handling dredge pipe, anchors, cables, winches, and depth-monitoring equipment. · Construction, marine, or heavy-equipment experience. · HyPack/DredgePack Physical and Work Requirements · Ability to lift and carry up to 75 pounds. · Ability to perform physically demanding construction and general-labor duties for extended periods. · Ability to stand, walk, climb, bend, kneel, push, and pull throughout the workday. · Ability to work outdoors in heat, cold, rain, and other weather conditions. · Physical stamina to perform strenuous work for long periods. · Ability to work safely around water, heavy machinery, pipes, cables, and active construction equipment. Benefits Full-Time Traveling Position Schedule: Approximately 75 hours per week; rotation-based Compensation: Based on experience, $30.00 + Benefits: 401K, Medical/Dental/Vision; Life Insurance, STD, Accidental, PTO, Holiday Pay

Job Description Position: Labor & Employment Attorney Sign-on bonus: $20,000 Compensation range: $180,000-$300,000 Rapidly growing management-side labor and employment law firm seeks a highly motivated Labor & Employment Attorney to support and expand its nationwide private-sector practice. This opportunity is ideal for entrepreneurial attorneys who want substantial responsibility, direct client exposure, meaningful courtroom experience, and the ability to independently manage sophisticated matters rather than operate within a heavily layered institutional environment. The firm represents employers across a broad range of industries in complex labor relations, employment litigation, workplace investigations, compliance counseling, and strategic business advisory matters. Attorneys will work directly with leadership and clients on high-impact legal issues involving federal, state, and administrative employment laws. This position offers a unique opportunity for both experienced labor and employment attorneys seeking elevated responsibility and long-term growth, as well as exceptional early-career attorneys with strong litigation aptitude, academic credentials, and a demonstrated interest in management-side employment law. Responsibilities Include: • Defending employers in federal and state employment litigation matters involving claims arising under Title VII, ADA, ADEA, FLSA, FMLA, and related state and local employment statutes., • Handling traditional labor law matters, including collective bargaining negotiations, grievance arbitrations, union avoidance strategies, unfair labor practice proceedings, and NLRB matters., • Conducting and defending depositions, managing written discovery, drafting dispositive motions, and preparing cases for arbitration, mediation, and trial., • Drafting EEOC and administrative agency position statements, arbitration briefs, employment agreements, workplace policies, and compliance-related documentation., • Advising employers on employee relations matters, workplace investigations, disciplinary actions, reductions in force, wage and hour compliance, and risk mitigation strategies., • Managing client relationships and serving as a strategic advisor to business owners, executives, and HR leadership teams. Qualifications: • Juris Doctor from an accredited law school., • Active license and good standing in at least one U.S. jurisdiction., • 2–12+ years of labor and employment law experience, preferably on the management side, though exceptional entry-level attorneys with strong academic credentials, law review, clerkship, litigation, or employment law internship experience are encouraged to apply., • Demonstrated legal writing, analytical, advocacy, and oral communication skills., • Experience or familiarity with employment litigation, labor relations, administrative proceedings, or workplace counseling matters preferred., • Ability to independently manage multiple priorities in a fast-paced and entrepreneurial legal environment., • Deposition, hearing, arbitration, mediation, and federal court experience is highly valued for more senior candidates., • Industry experience involving healthcare, hospitality, transportation, aviation, manufacturing, construction, or multi-state employers is a plus., • Willingness to travel periodically for hearings, arbitrations, litigation, and client matters. Compensation & Opportunity: • Compensation structure designed to be highly competitive with major metropolitan labor and employment markets, with total compensation potential ranging from approximately $180,000–$280,000+ depending on experience, business development capabilities, litigation background, and overall qualifications., • Opportunity for substantial hands-on litigation experience, direct mentorship, accelerated career growth, and long-term leadership potential within a growing practice., • Ideal environment for attorneys seeking greater autonomy, meaningful client interaction, and sophisticated legal work without the bureaucracy of a large institutional firm.

Job Description Position: Labor & Employment Attorney Sign-on bonus: $20,000 Compensation range: $180,000-$300,000 Rapidly growing management-side labor and employment law firm seeks a highly motivated Labor & Employment Attorney to support and expand its nationwide private-sector practice. This opportunity is ideal for entrepreneurial attorneys who want substantial responsibility, direct client exposure, meaningful courtroom experience, and the ability to independently manage sophisticated matters rather than operate within a heavily layered institutional environment. The firm represents employers across a broad range of industries in complex labor relations, employment litigation, workplace investigations, compliance counseling, and strategic business advisory matters. Attorneys will work directly with leadership and clients on high-impact legal issues involving federal, state, and administrative employment laws. This position offers a unique opportunity for both experienced labor and employment attorneys seeking elevated responsibility and long-term growth, as well as exceptional early-career attorneys with strong litigation aptitude, academic credentials, and a demonstrated interest in management-side employment law. Responsibilities Include: • Defending employers in federal and state employment litigation matters involving claims arising under Title VII, ADA, ADEA, FLSA, FMLA, and related state and local employment statutes., • Handling traditional labor law matters, including collective bargaining negotiations, grievance arbitrations, union avoidance strategies, unfair labor practice proceedings, and NLRB matters., • Conducting and defending depositions, managing written discovery, drafting dispositive motions, and preparing cases for arbitration, mediation, and trial., • Drafting EEOC and administrative agency position statements, arbitration briefs, employment agreements, workplace policies, and compliance-related documentation., • Advising employers on employee relations matters, workplace investigations, disciplinary actions, reductions in force, wage and hour compliance, and risk mitigation strategies., • Managing client relationships and serving as a strategic advisor to business owners, executives, and HR leadership teams. Qualifications: • Juris Doctor from an accredited law school., • Active license and good standing in at least one U.S. jurisdiction., • 2–12+ years of labor and employment law experience, preferably on the management side, though exceptional entry-level attorneys with strong academic credentials, law review, clerkship, litigation, or employment law internship experience are encouraged to apply., • Demonstrated legal writing, analytical, advocacy, and oral communication skills., • Experience or familiarity with employment litigation, labor relations, administrative proceedings, or workplace counseling matters preferred., • Ability to independently manage multiple priorities in a fast-paced and entrepreneurial legal environment., • Deposition, hearing, arbitration, mediation, and federal court experience is highly valued for more senior candidates., • Industry experience involving healthcare, hospitality, transportation, aviation, manufacturing, construction, or multi-state employers is a plus., • Willingness to travel periodically for hearings, arbitrations, litigation, and client matters. Compensation & Opportunity: • Compensation structure designed to be highly competitive with major metropolitan labor and employment markets, with total compensation potential ranging from approximately $180,000–$280,000+ depending on experience, business development capabilities, litigation background, and overall qualifications., • Opportunity for substantial hands-on litigation experience, direct mentorship, accelerated career growth, and long-term leadership potential within a growing practice., • Ideal environment for attorneys seeking greater autonomy, meaningful client interaction, and sophisticated legal work without the bureaucracy of a large institutional firm.

Job Description Key Responsibilities: • Personally investigate and/or supervise outsourced investigations of CGL insurance claims and lawsuits, both bodily injury and property damage, arising out of construction projects in the greater New York City metropolitan area within New York State., • Obtain necessary information from every possible source, from claimant's counsel to insureds, construction workers, first responders, other witnesses, and from experts such as engineers, consultants, and health care practitioners, to fully and accurately assess the causes and extent of each loss and to maximize opportunities to transfer the loss via rights of additional insured status and contractual indemnification from others., • Use knowledge of construction and CGL insurance practices in the New York construction market, particularly as driven by risk transfer and avoidance strategies of insurers that are related to New York's Labor Law vicarious liability statutes, to successfully shift duty to defend and indemnify to downstream contractors and carriers., • Retain defense counsel and coverage counsel as necessary and work effectively with them., • Manage all phases of the claims for New York bodily injury and property damage lawsuits from intake and investigation through litigation and resolution by mediation or other settlement, • Participates in negotiations, conferences and mediations with adjusting companies, outside legal counsel, staff, claimants, brokers, insureds, carrier and other involved parties, • Conduct coverage analysis on new and existing matters. Draft coverage opinions in collaboration with Claims Counsel, • Establish appropriate loss estimates based on all relevant information and findings and recommend reserves., • Draft and complete claims management status reports or the equivalent to clients on a quarterly basis, or as needed., • Manage and gather data for reporting on monthly Bordereau., • Make timely and accurate file notes and time and expense records as required Education/Skills/Experience required: • 1 or more years of CGL insurance or risk management involving CGL and liability umbrella insurance experience, • Ideally background in handling CGL bodily injury and property damages claims, including bodily injury claims under New York Labor Law, • Bachelor's degree required. GL adjuster license required. J.D. preferred but not required, • Strong with MS Office applications (Outlook, Word, Excel, PowerPoint), • Strong client advocacy and interpersonal skills, • Demonstrated decision making and problem-solving skills, • Excellent organizational, project management and leadership skills., • Calm and level-headed under pressure, with a logical approach to problem solving., • Excellent communication skills, both written and verbal, with the ability to forge strong working relationships with key stakeholders at a range of levels., • Self-motivated and target driven., • Detail-oriented with the ability to multi-task and meet deadlines with minimal supervision, • Ability to work effectively in a fast-paced, team environment, • High level of commitment to quality work product and organizational ethics, integrity, and compliance Benefits: Medical, 401K Salary commensurate with experience.

Job Description A highly respected boutique personal injury law firm seeks an associate attorney with extensive experience in handling construction accident claims, Labor Law §200, 240 and 241, as well as motor vehicle and general negligence claims. QUALIFICATIONS: • Experience conducting court conferences, court and arbitration hearings, depositions, mediations, arbitrations, trials and appellate arguments., • Admission to the New York State Bar, • Litigation experience., • Tried cases to verdict is a plus., • Excellent Working knowledge of the CPLR, personal injury laws and personal injury treatment., • Excellent oral and written communication skills., • Strong research and analytical skills., • Ability to handle significant caseload and juggle multiple priorities & meet deadlines., • Proven excellent negotiations skills!, • Ability to work independently as well as in a team environment., • Strong technology skills including proficiency with Microsoft Office software and legal research platforms such as Lexis and Westlaw., • Understanding of medical, scientific, construction, products, engineering, and similar issues inherent in personal injury cases. QUALIFIED ATTORNEYS WILL BE CONTACTED FOR ADDITIONAL CREDENTIALS

Job Description Legal Administrative & Client Support Assistant – International Practice (Italy Group) Join a high-performing team at the intersection of law, global business, and innovation. Are you a proactive professional who thrives in dynamic, multicultural environments? Do you take pride in making things run smoothly, keeping people organized, and delivering exceptional client experiences? If so, we invite you to bring your talents to our growing International Team as a Legal Administrative & Client Support Assistant—with a primary focus on supporting our vibrant Italy Practice Group. In this role—you’ll be at the center of coordination for attorneys, clients, and international partners. From managing complex calendars and creating polished legal documents to navigating time zones and supporting high-stakes engagements, you’ll be a key contributor to a practice that spans continents and industries. You’ll work closely with the Chair, Co-Chair, and a team of attorneys, helping them stay focused, prepared, and responsive in a fast-paced, client-first environment. This is a role for someone who takes initiative, enjoys variety, and finds satisfaction in being indispensable. What sets this role apart: • Global scope: Work with international clients and legal professionals in a cross-border context., • Innovation mindset: Use cutting-edge technology—including AI-powered legal tools—to streamline workflows and increase impact., • High visibility: Play a pivotal role in supporting leaders and shaping the client experience., • Growth potential: Expand your skills and contribute to a practice area with ambitious goals and a strong reputation. Key responsibilities: Client & Practice Support • Serve as the first point of contact for clients, guests, and outside parties—via phone, email, and in person—with warmth, discretion, and professionalism., • Coordinate meetings across time zones, manage conference room logistics, and prepare relevant materials., • Create, edit, and format legal and business documents (engagement letters, memos, presentations, closing binders)., • Arrange domestic and international travel—from flights and hotels to local transportation and detailed itineraries., • Handle matter openings, maintain client files (electronic and hard copy), and ensure accuracy and compliance with firm protocols. Administrative & Billing Support • Manage attorney time entries, monthly billing, and expense submissions—ensuring accuracy and meeting key deadlines., • Prepare expense reports and credit card reconciliations in a timely and detail-oriented manner., • Support internal projects, marketing efforts, and business development initiatives as needed., • Proactively manage shifting priorities in a deadline-driven environment. What we’re looking for: • 3+ years of experience in a legal, executive assistant, or professional services support role., • Bachelor’s degree preferred., • High proficiency in Microsoft Office (Word, Excel, Outlook, PowerPoint), Adobe Acrobat, and legal platforms such as iManage., • Excellent written and verbal communication, organization, and proofreading skills., • Strong judgment and discretion in managing confidential information., • Team-oriented with the ability to work independently and prioritize effectively., • A flexible, client-service mindset and a polished, professional demeanor., • Comfort with (and curiosity about) learning new tools—including AI-based legal technologies., • Fluency in Italian (spoken and written) is required., • In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire. TKD is currently maintaining a hybrid schedule structured as Tuesdays, Wednesdays, and Thursdays in-office with alternating Mondays and the option to be remote Fridays. Why you'll love working here: This is an opportunity to build a career alongside accomplished professionals, contribute to international legal matters, and grow within a firm that values excellence, agility, and human connection. If you’re resourceful, ambitious, and ready to be part of something global, we’d love to meet you. Compensation & benefits: The good faith base annual salary range for this position is a minimum of $55,000 to a maximum of $110,000. The actual salary rate offered to candidates within that range will depend on a variety of factors, including without limitation, years of relevant experience, applicable education/certification(s), office location, and the candidate's overall qualifications for the position as assessed by the Firm. Market and Firm factors are also considered. Our generous benefits package includes medical, dental, vision insurance; 401K, disability, life insurance, and Paid Time Off (PTO). More about the Firm: TKD is a pre-eminent full-service firm focused on serving middle-market and larger business clients. We provide high-quality personalized service based on our client’s goals. The strength of the firm lies not only in its experienced attorneys and congenial atmosphere but also in our holistic approach to law – serving businesses and individuals through commercial litigation, general corporate, real estate, construction-related matters, trust and estates, employment & labor law, as well as more specialized areas, including securities, not-for-profit and education, taxation, business-related immigration matters, international law, intellectual property, and bankruptcy, among others. Our lawyers have also garnered several prestigious recognitions for their contributions to the profession and their clients. We have been selected by Crain’s NY Business as a Best Places to Work in New York City and listed on the National Law Journal’s Hot List of the top 20 mid-sized firms in the nation. Many of our lawyers are ranked in Chambers USA and included among Best Lawyers and Super Lawyers. TKD is an Equal Opportunity Employer. We embrace equal employment opportunity and inclusiveness. We prohibit discrimination based on, among other characteristics, race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, immigration or citizenship status, age, disability, genetic information (including family medical history), political affiliation, status as a veteran or active military service member, and pregnancy and lactation accommodations, in our employment practices including, but not limited to, recruiting, hiring, and promoting. TKD will not accept unsolicited resumes from search firms for this employment opportunity. All resumes submitted by search firms to any employee at TKD via mail, email, fax, the Internet, or in any other form and/or method without a valid written search agreement in place will be deemed the sole property of TKD. TKD will NOT pay a fee for any placement resulting from the receipt of an unsolicited resume.

Job Description We understand that healthcare careers are more than jobs—they are a calling. At Transformational Health Network, Inc. (TrHN), we partner with respected healthcare organizations to place highly skilled registered nurses, advanced practice providers, and physicians in roles where they can make a meaningful impact on patient care. Our mission is to help healthcare professionals find positions that offer growth, flexibility, competitive compensation, and supportive clinical environments. Employment Attorney – Counsel & Special Counsel Confidential Legal Recruiting Opportunity Locations: California | Florida | New York/New Jersey | Georgia | Arizona | Washington | Kentucky | Texas Work Arrangement: Virtual / Remote Position Types: Counsel | Special Counsel | Senior Counsel | Partner Practice Area: Labor & Employment / Employment Litigation About the Opportunity A leading national law firm is expanding its Labor & Employment practice and is seeking experienced attorneys for several virtual office opportunities. California remains the highest-priority market, with a particularly strong need for California-barred Counsel-level attorneys. Qualified attorneys in additional priority markets are also encouraged to apply. These opportunities are designed for experienced attorneys who want to practice at a high level while benefiting from a remote work environment, flexible billable-hour targets, and reduced business-development pressure. Current Recruiting Priorities Market Priority California Counsel & Special Counsel — Highest Priority Alabama Counsel; additional state bar admissions preferred Washington Counsel & Special Counsel Arizona Counsel & Special Counsel Texas Counsel with litigation experience New York / New Jersey Counsel & Special Counsel; NJ bar particularly needed Georgia Special Counsel with wage & hour experience Florida Counsel — passive need MA / NY / NJ / PA Counsel or Special Counsel with general liability/negligence experience Kentucky Counsel & Special Counsel opportunities CA-Licensed Virtual Office Attorneys California-barred attorneys are a top recruiting priority. Role 1,500 Hours 1,600 Hours 1,700 Hours 1,850 Hours VO Counsel $145,000 $155,000 $165,000 $180,000 VO Special Counsel $180,000 $190,000 $202,500 $217,500 Nationwide Virtual Office Attorneys Role 1,500 Hours 1,600 Hours 1,700 Hours 1,850 Hours VO Counsel $140,000 $150,000 $160,000 $175,000 VO Special Counsel $172,500 $182,500 $195,000 $210,000 Practice Areas of Interest The firm is particularly interested in attorneys with experience in: • Labor & Employment, • Employment Litigation, • Management-side Employment Law, • Wage & Hour, • General Liability, • Negligence, • Construction Litigation, • Employment Counseling, • Workplace Investigations, • Complex Litigation Virtual Office Business Immigration Attorney Remote | Counsel A separate virtual opportunity is available for an experienced Business Immigration Attorney with at least 3 years of experience. Preferred Experience • Nonimmigrant visa matters, • H-1B, • L-1, • E, • TN, • O classifications, • Employment-based immigration, • EB-1, EB-2, EB-3, • PERM, • I-140 petitions, • Requests for Evidence (RFEs), • Immigration compliance, • I-9 audits, • Employer counseling Qualifications • JD from an ABA-accredited law school, • Active bar membership in good standing, • Minimum of 3 years of business immigration experience, • Strong written and verbal communication skills, • Ability to work independently in a remote environment, • Strong client-service orientation Compensation $135,000–$170,000 annually, depending on experience, skills, qualifications, and selected billable-hour target. Employment Attorney Partner Opportunities The firm is also actively interested in Employment Law Partners, particularly: • California-based Partners, • Partners with $1M+ portable book of business, • Established management-side employment practices, • Attorneys with significant client relationships, • Partners interested in expanding their practice on a national platform Partner placements are compensated at a 25% placement fee. Why Consider a Virtual Office Opportunity? • Fully remote work environment, • Flexible billable-hour targets, • Greater work/life balance, • Reduced business-development pressure for Counsel/Special Counsel roles, • No requirement to independently source business for virtual office positions, • Opportunity to work with experienced legal professionals, • National client base, • Long-term career growth opportunities Interested Candidates Qualified attorneys should submit a current resume and indicate: • Current location, • Bar admissions, • Current title, • Practice specialty, • Years of experience, • Current billable-hour requirement, • Preferred billable-hour target, • Current compensation, • For Partners: approximate portable book of business Confidential Search: Client/firms names and detailed opportunity information will be disclosed to qualified candidates during the recruiting process. Ready to take the next step in your healthcare career? Apply today to be considered for this opportunity and others that match your background. Our recruiting team is here to support you throughout the process—from initial conversation to placement and beyond.

Job Description Summer 2027 Sales Intern National Corporate Housing | Home, Wherever You Are National Corporate Housing is looking for a qualified Sales Development Representative Intern to join our sales team. Our sales team is responsible for acquiring new customers and generating revenue in Corporate Housing, Travel Services, Rental Assistance, Sourcing Technology, and Talent Solutions. This intern will support the team by generating and qualifying leads and setting sales appointments for our Account Executives. At National, we don’t just provide housing—we create home-like experiences for global business travelers and relocating professionals. With 28+ offices worldwide, we’re a trusted leader in customized corporate housing and 360-degree services that make transitions seamless. Expectations for Success: • Work with sales management to develop target lists, call strategies, and messaging, • Identify and research prospects/leads within new accounts, • Respond to inbound requests and execute a high volume of outbound calls and emails daily, • Manage and maintain a pipeline of target prospects while gathering information and vetting interest, • Follow up and move leads forward in the sales process by setting appointments for Account Executives, • Engage with Account Executives to ensure timely handoff of leads for ongoing opportunity management, • Leverage the CRM platform (Salesforce) and be diligent about creating and managing all data and activities, • Participate in marketing and sales campaigns, • Collect and share feedback on lead quality to support demand generation, • Assist with the property referral program within the market What Makes This Role Unique?, • This role offers hands-on experience in the full sales cycle, from lead generation to relationship building, in a fast-paced corporate housing industry., • You will work directly with Account Executives and senior sales leaders, receiving mentorship and real-time feedback to sharpen your sales skills., • You’ll have the opportunity to contribute to high-impact projects that influence market growth and revenue while gaining exposure to multiple business lines including Corporate Housing, Travel Services, and Talent Solutions., • The position allows you to build a professional network across industries such as engineering, construction, technology, and professional sports, and includes competitive pay plus commission potential, rewarding you for your success.Who You Are:, • Customer-oriented with a high level of professionalism, • Strong desire to learn and succeed in sales, • Responsive, friendly, and thoughtful communicator, both written and verbal, • Coachable with the ability to accept feedback and make changes, • Quick learner who can adapt to a changing work environment and retain large amounts of information, • Collaborative mindset with the ability to help others succeed while meeting personal goals, • Comfortable making phone calls and not solely relying on electronic communication, • Experience with Microsoft Office Suite, • Experience with Salesforce CRM preferred, • Relevant major preferred Ability and willingness to drive throughout the local market as needed for property visits. Benefits: • $20/hour plus commissions, • One-of-a-kind culture dedicated to Diversity, Equity, and Inclusion, • Inclusive Awards and Recognition Program, • National is a drug & alcohol-free workplace. Please note that we conduct a background check and 5 panel drug screen after a contingent offer has been made. Possible Office Locations: Southern California, Minneapolis MN, Michigan, Seattle WA, Southern Virginia, Columbus, Georgia, Charlotte, Kansas, Houston, Indianapolis, Northern California, Cleveland, Chicago, Denver, Washington DC, Phoenix, Dallas Additional Information: We need someone to dedicate 40 hours per week from late May/early June to mid-late August 2026. Fair Labor Standards Act (FLSA): Non-Exempt Will not provide assistance with relocation costs National Corporate Housing is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, religion, or veteran status.

Job Description National, award winning results-driven plaintiff litigation firm that represents tens of thousands of clients in personal injury litigation, civil litigation, and mass torts including product liability, dangerous drugs and defective medical products is seeking a Construction Accident Litigation Attorney to join a growing construction accident practice in their New York, NY office. Ideal candidates will also have experience in New York Labor Law. The firm values independence, efficiency, and fierce advocacy for injured workers. As part of their team, you’ll enjoy the freedom of hybrid/remote work (based on performance and firm policy) while being fully supported by a collaborative and experienced legal staff. This position focuses on representing injured workers in complex personal injury cases stemming from construction site accidents, including falls, scaffolding and ladder incidents, falling objects and other site-related hazards. The successful candidate will be highly motivated and tech-savvy with moderate litigation experience, strong organizational skills, and the ability to manage a caseload with minimal supervision. Key Responsibilities Include: • Case Management: Independently handle a caseload of construction-related injury claims from intake through resolution, including discovery, motion practice, negotiations, and trial prep., • Client Representation: Advocate for clients throughout the legal process—draft pleadings, participate in depositions, attend hearings, and support or lead trial work when necessary., • Investigation & Strategy: Evaluate accident circumstances, gather and review evidence, identify safety failures, and build strong, fact-based legal strategies., • Legal Drafting: Prepare legal documents including complaints, motions, discovery responses, and settlement agreements with accuracy and timeliness., • Client Communication: Maintain frequent, professional communication with clients, providing updates, answering questions, and managing expectations., • Collaboration: Work closely with other attorneys, paralegals, and legal assistants—remotely and in person—to ensure smooth case progression and positive outcomes., • Technology: Utilize modern legal software and tools to manage cases, meet deadlines, and streamline workflows in both remote and in-office environments Qualifications • Must have a J.D. from an accredited law school, • Must be licensed and in good standing to practice law in New York, • Must have 3–5 years of litigation experience, preferably handling construction site or serious personal injury cases, • Must have familiarity with construction site safety standards and industry practices, • Bilingual (Spanish) is a plus but not required, • Must be self-motivated and capable of working without close supervision, • Must be detail-oriented and deadline-driven, • Must be a clear communicator and team collaborator, • Must be passionate about representing injured workers and achieving results Skills: • Strong writing, legal research, and oral advocacy, • Proficiency in legal tech platforms and cloud-based case management systems, • Comfortable working in a paperless environment utilizing the latest technology including AI, • Ability to prioritize, organize, and work efficiently in both remote and in-office settings Benefits: • Competitive salary based on experience, • Health, dental, and vision insurance, • 401(k) with employer match, • Paid time off and holidays, • Supportive work environment with growth opportunities

Job Description Fairstead is a purpose-driven real estate firm dedicated to building affordable communities across the country. Headquartered in New York, with offices in Colorado, Florida, and Washington DC, Fairstead owns and manages a portfolio of more than 30,000 apartments, including pipeline, across 28 states. As an integrated owner, operator, and innovator, Fairstead brings development, construction, and property management under one unified platform to deliver high-quality affordable housing that serves our residents at scale. At Fairstead, we believe affordable housing should be thoughtfully designed, professionally managed, and responsibly operated. We seek to create and preserve housing that serves residents while delivering long-term value to communities, partners, and stakeholders. Fairstead challenges industry norms through our tech-forward, entrepreneurial approach to affordable housing. In addition to core real estate capabilities, we operate innovative service lines designed to improve resident outcomes, strengthen communities, and drive operational efficiency. We embrace digital transformation, data-driven decision-making, and emerging technologies, including AI, to build scalable systems that support sustainable growth, grounded in a culture of entrepreneurship, innovation, partnership, dedication, and integrity. We're hiring a rare combination: a high-performing, full-cycle recruiter who is equally energized by building the systems that make recruiting scale. You'll design, build, and eventually run a modern, increasingly automated recruiting process for a property management organization with hundreds of team members across the country, while personally sourcing and closing standout talent along the way. You'll start hands-on. You'll recruit for our highest-priority and hardest-to-fill roles across our markets, and get close enough to the day-to-day pain points to know exactly what needs to be fixed. From there, you'll partner with our team to design the process, tools, and automation that let us consistently hire high performers, faster and more consistently, and then own that process going forward. As the function matures, you'll have the opportunity to build and lead a small recruiting team. RESPONSIBILITIES: Recruit • Run full-cycle recruiting for property management roles, from site-level and community teams up through regional and portfolio-level positions., • Source and close high-performing talent in every role, and define clearly what a high performer looks like for each role and market., • Build a real understanding of how our different markets differ (talent supply, compensation norms, competitive landscape, seasonality) and adjust sourcing and pitch accordingly., • Act as a strong partner to hiring managers and regional leaders, advising on hiring strategy rather than only filling open requisitions. Build the Process • Design and implement a scalable, increasingly automated recruiting process for the property management division, from requisition to offer., • Evaluate, recommend, and help implement recruiting technology (ATS, sourcing tools, screening/assessment tools, scheduling automation, workflow tools) that fits a multi-site workforce of hundreds of team members., • Build repeatable workflows for high-volume, high-turnover role categories (e.g., leasing, maintenance, community management) as well as more selective processes for senior hires., • Create the reporting and metrics layer (pipeline health, time-to-fill, source effectiveness, cost-per-hire, quality-of-hire) that lets the team and leadership see what's working., • Document the process well enough that it can run consistently across markets and, eventually, be handed off or delegated. Own and Evolve It • Once built, manage the recruiting process day-to-day: own the tools, refine the workflows, and keep improving time-to-fill and quality-of-hire., • Bring a point of view on what to automate next, and make the case for it., • Stay current on recruiting technology and multifamily/property-management hiring trends, particularly anything relevant to high-volume, multi-market hiring., • As volume and scope grow, make the case for and potentially hire, onboard, and lead additional recruiters or coordinators to support the process you've built. WHAT SUCCESS LOOKS LIKE • Consistently strong quality-of-hire and retention in the roles you fill, alongside fast fill times., • A documented, working recruiting process and tech stack that the team actually uses day to day., • Time-to-fill and cost-per-hire trending down as automation takes hold., • Hiring managers and regional leaders who see you as a strategic partner in hiring decisions., • A clear, credible roadmap for what gets automated or improved next., • If/when volume warrants it, a well-run small team built around the process you designed. QUALIFICATIONS • 5+ years of full-cycle recruiting experience, ideally including high-volume or multi-site hiring (property management, hospitality, retail, healthcare, or similar industries welcome)., • A track record of building or significantly overhauling a recruiting process or tech stack yourself, rather than only using one someone else built., • Hands-on experience with an ATS. We currently use Greenhouse, so direct experience there is a strong plus, along with a working knowledge of sourcing, scheduling, and workflow-automation tools., • Comfort with data: you can build and read a recruiting dashboard, and you make decisions from it., • The judgment to know what to automate, what still needs a human touch, and when a process is genuinely ready to scale., • Strong stakeholder management skills: you can influence regional and site-level leaders who don't report to you., • Understanding (or a fast ability to learn) how recruiting needs differ across geographic markets: labor supply, comp benchmarks, competitive dynamics. NICE TO HAVE • Experience recruiting specifically for multifamily, affordable housing, or property management roles., • Experience with Workday (or leading a Greenhouse-to-Workday integration or migration)., • Experience with AI-powered sourcing, screening, or scheduling tools., • Experience leading or co-leading an ATS/HRIS implementation or migration., • Experience recruiting across a large multi-state footprint., • Prior experience building and managing a small recruiting team. Exact compensation may vary based on skills, experience, and location. Salary Range $130,000—$160,000 USD Diversity in backgrounds and experiences is key to Fairstead's success. Being an equal opportunity employer is a central tenet of our philosophy that shapes who we are and the communities we serve. Our goal is to ensure competitive total compensation that is commensurate with experience, location, and other market benchmarks. For information about how we use your personal information, including information submitted for career opportunities, please review our Privacy Policy at https://fairstead.com/privacy-policy/

Job Description Project Accountant – Roma (Construction Industry) Project Accountant Location: Long Island City, NY Job Type: Full-Time About Us Founded more than 25 years ago, ROMA Scaffolding is known for delivering large and complex public projects ahead of schedule and within budget. We specialize in CIP projects involving interior and exterior renovations, flood elimination, masonry restoration, roofing, and window replacement. As a leading sidewalk shed and scaffolding installer in the New York City market, ROMA’s diversified construction experience allows us to provide unified solutions tailored to our clients’ specific needs. ROMA has grown to more than 100 employees, all committed to quality, collaboration, and safety. Our “safety first” approach has positioned us as a preferred contractor for public sector clients. Position Summary: We are seeking an experienced Project Accountant to join our growing construction team. The ideal candidate will have a minimum of five (5) years of accounting experience within the New York City construction industry and possess strong knowledge of project accounting, certified payroll, union reporting requirements, and public agency compliance. This position will work closely with project managers, estimators, field personnel, and senior management to ensure accurate financial reporting and contract compliance. Key Responsibilities • Manage all aspects of project accounting for multiple construction projects., • Prepare, review, and submit certified payroll reports in accordance with federal, state, and local prevailing wage requirements., • Process and reconcile union payroll, union benefit contributions, and union remittances., • Monitor project costs, budgets, commitments, and job profitability., • Prepare monthly project cost reports and work-in-progress (WIP) schedules., • Review subcontractor invoices, lien waivers, insurance certificates, and compliance documentation., • Assist with contract billing, including AIA billing and requisition preparation., • Track change orders, purchase orders, and subcontract agreements., • Ensure compliance with requirements of NYC public agencies and government-funded projects., • Coordinate audits related to prevailing wage, certified payroll, union benefits, and public agency contracts., • Support month-end and year-end closing processes., • Maintain accurate project records and accounting documentation., • Collaborate with project management teams to analyze project financial performance and identify cost-saving opportunities. Qualifications Required • Minimum of five (5) years of project accounting experience within the NYC construction industry., • Proven experience preparing and managing certified payroll., • Strong knowledge of prevailing wage regulations., • Experience working with union labor agreements and union benefit reporting., • Experience with NYC public agencies, including contract compliance and reporting requirements., • Strong understanding of construction accounting principles and job cost accounting., • Proficiency in Microsoft Excel and construction accounting software., • Excellent analytical, organizational, and communication skills., • Ability to manage multiple projects and deadlines in a fast-paced environment. Preferred • Extensive experience with agencies such as the NYC School Construction Authority (SCA), NYC Department of Design and Construction (DDC), NYC Housing Authority (NYCHA), Metropolitan Transportation Authority (MTA), Port Authority, or other public-sector entities., • Experience with AIA billing and WIP reporting., • Bachelor’s degree in Accounting, Finance, or a related field., • Knowledge of Sage300 Compensation & Benefits • Competitive salary commensurate with experience., • Health, dental, and vision insurance, life insurance, • Paid time off and holidays., • 401(k) retirement plan., • Professional development opportunities. Work Location Long Island City Employment Type Full-Time (In Office) Salary Range 75-85k

Job Description Watch your work come to life in landmark projects around the world when you partner with Syska Hennessy Group! As a global leader in consulting, engineering, and commissioning service, we specialize in MEP, information and communication technology, architectural lighting, vertical transportation, and commissioning. We are seeking an experienced Senior Plumbing Engineer to join our team in New York, NY office. Our dynamic work environment provides the optimal setting to take your engineering career to the next level. From our supportive culture, diverse workforce, and competitive compensation to our flexible work schedule Monday to Thursday in the office for 9 hours and Friday for 4 hours remotely at home and fun social events, it is everything you will need for an exciting, challenging, and rewarding career. Job Responsibilities: As a Senior Plumbing Engineer, you will perform design engineering and provide system design support by working closely with all MEP disciplines to assure well-coordinated designs. This dynamic role will also involve consulting and interfacing with clients, architects, vendors, contractors, and authorities having jurisdiction. Additional responsibilities: • Conduct field surveys, system assessments, and system commissioning, • Attend coordination meetings and job sites, • Perform calculations under Senior Engineer/Designer, • Produce clear and concise drawings consistent with client requirements and firm organization format and drawing standards, • Apply Codes and Standards to all designs (including working drawings and specifications), • Conducting peer reviews and provide QA/QC oversight, • Perform code interpretation, • Assist in business development by expanding on current client relationships, cross selling Syska services and by attending industry and clients events This is a great opportunity for a Senior Plumbing Engineer with a large variety of facility types including Commercial, Industrial, Institutional, and Governmental buildings experience, as well as experience in critical facilities, storage facilities design. In addition to your engineering experience, to succeed in this role, you will need a solid knowledge of fire protection systems design for various projects with the ability to communicate design concepts via drawings and specifications. Engineer requirements: • Bachelor's degree in mechanical engineering; exceptional candidates may substitute with significant years of experience, • Minimum of seven (7) to ten (10) years of relevant experience in the Plumbing Design field, • Experience with the latest version of REVIT is a must, • A working knowledge of the various applications of fire suppression systems gained through both formal training (NFPA 99) and project experience, • Solid knowledge of Mechanical / Plumbing trades, building codes, and drawings/documents, • Detailed knowledge of equipment from various manufacturers and the ability to make proper selections independently., • Ability to independently perform fire suppression hydraulic calculations to support design and estimate construction costs and evaluate the feasibility of construction, • Certified Plumbing Designer (CPD) Certification, highly preferred Benefits: As a Senior Plumbing/Fire Protection with Syska Hennessy Group, you will be part of a global firm with an amazing history! We are committed to being the best, to advancing engineering design practice, and to supporting our clients with integrity. To make all of that happen, we rely on the talent, drive, enthusiasm, and the total job satisfaction of the great people who work here. As a member of our highly collaborative team, we provide you with a flexible benefits package that reflects our respect for your workplace contributions, professional goals, and personal priorities. The personal benefits program at Syska Hennessy Group includes: • Robust, comprehensive medical, dental, vision, life insurance and supplemental benefit plans, • 401(k) plan with a generous employer matching program, • Training and professional development courses, • Professional development incentive bonuses, • Dynamic Employee Resource Groups, • Competitive Paid Time Off (PTO) policy, • Transit/parking employer stipend, • ½ day work from home Fridays all year long At Syska, we promote an environment that is committed to embedding diversity and equality into the core of our business and culture. We empower our employees so they can take ownership for their work and development and strive to continually improve themselves and our firm. Syska is a place where you can build an exceptional career and have a lasting impact on the world. Syska Hennessy Group | Integrating the best minds and technology to help clients create exceptional environments The salary range listed below is for this particular job posting. Actual pay range for candidates will be commensurate with candidate's experience, skillsets and competencies and may differ based on the cost of labor in their particular location. New York Pay Range $116,615—$169,922 USD

Job Description POSITION SUMMARY Reports to: Safety Manager (SM) The Safety Coordinator (SC) role centers on ensuring that all project activities comply with federal, state, and local safety regulations while fostering a proactive safety culture on-site. This position manages safety and security matters at the Work Site for the duration of the Contract and involves conducting risk assessments, developing and implementing safety protocols, and collaborating with project managers and site supervisors to mitigate hazards. The SC is responsible for training personnel, performing regular inspections, and investigating incidents to identify root causes and prevent recurrence. His expertise is critical in maintaining a safe working environment, reducing injury rates, and ensuring regulatory compliance throughout the project lifecycle. The SC plays also a strategic role in shaping safety policies and driving continuous improvement initiatives. By analyzing safety data and trends, he provides actionable insights to enhance operational efficiency and reduce risk exposure. The position demands strong communication skills, attention to detail, and the ability to influence behavior across diverse teams. Ultimately, the SC contributes to the successful delivery of the construction project by safeguarding the health and well-being of all stakeholders and reinforcing the organization's commitment to safety excellence. The SC shall be independent of the physical construction effort and shall be available fulltime to fulfill the requirements of the Contract. The SE shall have the authority to stop Work if they determine that Unsafe Conditions are present. The SC’s key responsibilities are: • Implementing the Health and Safety Management System (HSMS)., • Participating in the development and implementation of HASP., • Developing and implementing site-specific safety plans and procedures., • Conducting regular safety audits and inspections of construction sites., • Identifying potential hazards and recommending corrective actions., • Ensuring compliance with OSHA, local, and federal safety regulations., • Investigating accidents and incidents to determine root causes., • Performing safety inspection, documenting and maintaining records on safety findings, inspections, incidents, and corrective actions., • Documenting any near misses or incidents., • Providing safety training and orientation for new employees and contractors., • Monitoring the use of personal protective equipment (PPE)., • Collaborating with project managers to integrate safety into planning and execution., • Reviewing construction plans for safety implications., • Conducting toolbox talks and daily safety briefings., • Completing Daily Safety Reports, tracking and reporting safety performance metrics., • Coordinating emergency response plans and drills., • Ensuring proper signage and barricading on-site., • Evaluating subcontractor safety programs and compliance., • Recommending improvements to safety policies and procedures., • Staying current with industry safety standards and best practices., • Supporting environmental health and safety (EHS) initiatives., • Managing safety documentation and reporting systems., • Advising on ergonomic practices and injury prevention., • Conducting job hazard analyses (JHAs) and risk assessments., • Participating in pre-construction and progress meetings., • Promoting a culture of safety among all site personnel., • Responding to safety-related inquiries and concerns., • Coordinating with insurance and legal teams on safety matters., • Ensuring safe operation of heavy machinery and equipment., • Monitoring weather conditions and adjusting safety protocols accordingly., • Overseeing fire prevention and control measures., • Implementing fall protection systems and monitor compliance., • Supporting continuous improvement through feedback and lessons learned., • Competent to instruct on-site personnel., • Notifying the PM of any H&S related nonconformities that may arise., • Addressing the Corrective/Preventive Actions issued following Internal Audits or indications received from the client, responsible agencies and following up on their implementation., • Communicating with all designated Competent Persons before, during, and after completion of their work shifts., • Complying with all NYCT and Metro-North specific safety rules and requirements., • Complying with all other AHJ specific safety rules and requirements. EDUCATION AND QUALIFICATIONS • Bachelor’s degree in Occupational Health and Safety, Engineering, Construction Management, or a related field., • Minimum of 2 years of experience in construction safety or a similar role., • Experience in the construction industry, tunnel, large infrastructure projects, healthcare, and mental health field., • Shall have demonstrated relevant safety experience on at least one (1) tunneling project., • Successfully NYCT and MNR Track Safety trained., • Successful completion of the 40-hour NYC-Department of Buildings Site Safety Manager Course., • Successful completion of the 30-hour OSHA Construction Safety and Health (29 CFR 1926) Course., • Certification such as CSP (Certified Safety Professional), CHST (Construction Health and Safety Technician), or equivalent is preferred., • A minimum of ninety (90) days prior ROW experience including flagging and diversions of service., • Active member of American Society of Safety Professionals (ASSP)., • Possess and maintain the current New York State Department of Labor Asbestos Inspectors License., • Possess and maintain a current C-3/C-5 Supervisor / Competent Person Training for De-leading of Industrial Structures Certificate., • Deep knowledge of construction, occupational health and safety is a must., • Understanding the OSHA guidelines, ISO 45001 requirements and all federal, state, and local safety regulations., • Certified in risk management and health/safety management. ISO 45001 Internal Auditor certification is preferred., • Familiarity with the tools, machines and equipment used in the tunnel., • Attention to detail. Critical thinking, analytical and problem-solving skills., • Ability to teach others the established safety standards., • Ability to work well as a team and interact with different groups of people., • Ability to manage multiple tasks and priorities at the same time while meeting deadlines., • Extensive attention to detail to distinguish safety hazards., • Ability to provide detailed reports and develop safety procedures., • Good understanding of data analysis and risk assessment., • Ability to recognize when safety conditions need improvement., • Ability to prioritize tasks especially when handling an accident or incident., • Excellent verbal, written and interpersonal communication skills across all levels of organization., • Knowledge of construction safety management. Possessing in-depth knowledge of general safety guidelines such as Occupational Safety and Health guidelines is a must., • Must be able to prioritize and multi-task in the face of many safety responsibilities/duties., • Computer literacy skills and comfort with various types of technology used in the industry. Advanced Microsoft Office suite (Word, Excel, PowerPoint). JOB REQUIREMENTS • Ability to lead safety training sessions and toolbox talks for diverse teams. Able to read, write, and speak English fluently., • Skilled in incident investigation, root cause analysis, and corrective action planning., • Proficiency in safety management software and reporting tools., • Excellent communication and interpersonal skills to collaborate with project managers, contractors, and workers., • Ability to perform regular site inspections and audits to ensure compliance., • Strong analytical and problem-solving skills with attention to detail., • Capable of working in high-pressure environments and managing multiple priorities., • Commitment to promoting a culture of safety and continuous improvement across all project phases., • Prepare and maintain records, reports, and formulate correspondence relative to the job., • Organize and take part in assessing accident/injury reports and arranging accident/injury-related statistics., • Identify the training and development needs of project staff and ensure that the needs are met., • Inspect machinery used on the site to find out possible unsafe conditions., • Work together with the emergency medical services to provide and organize emergency services for injured and/or sick staff., • Be regularly aware of new developments in safety laws that are bound to impact on the project., • Regularly provide training and coaching across all staff levels as required by all safety rules and regulations., • Make sure that new employees are well-informed as regards safety instructions before they start work and emphasize and explain any form of possible environmental hazard, including applicable precautions. PHYSICAL DEMANDS • Work is primarily performed at active construction sites, including underground and surface environments., • Must be able to stand, walk, and climb for extended periods; navigate uneven ground, scaffolding, and ladders; and work around heavy equipment., • Exposure to noise, dust, vibration, confined spaces, and varying weather conditions are common., • Requires regular use of personal protective equipment (PPE), including hard hats, safety boots, high-visibility clothing, and eye/ear protection., • Ability to perform site inspections, monitor field activities, and respond quickly to safety or operational issues in physically demanding conditions., • Flexibility to work extended hours, nights, weekends, and rotating shifts as project demands require., • Occasional office-based work is required for reviewing documents, preparing reports, and coordinating with project management teams. WORK ENVIRONMENT FCC is dedicated to creating an inclusive workplace where diversity is valued and respected. As an Affirmative Action/Equal Opportunity Employer, we do not discriminate against any applicant for employment or employee because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, genetics, creed, veteran status, military status, or any other characteristic protected under Federal, State, or local laws. Reasonable accommodation will be provided to qualified individuals with disabilities in accordance with applicable law.

Job DescriptionCertified Of New York Inc. is a New York-based construction company specializing in high-level hospitality and high-end residential projects. We are looking for a full-time Junior Construction Estimator with at least 2 years of construction estimating experience to help review project documents, prepare cost estimates, request vendor pricing, and support our estimating and project management team. This is a strong opportunity for someone who is detail-oriented, organized, comfortable working with numbers, and interested in growing their estimating career in high-quality residential and hospitality construction. Compensation: $65,000–$75,000 per year, based on experience Job Type: Full-time Schedule: Monday to Friday Work Location: In person, New York, NY Responsibilities: • Review project drawings, specifications, scopes of work, photos, and bid documents., • Assist with preparing construction cost estimates and proposals., • Perform quantity takeoffs for materials, labor, and subcontractor scopes., • Request pricing from vendors, suppliers, and subcontractors., • Compare quotes and organize estimate information., • Help calculate material, labor, equipment, and subcontractor costs., • Track bid deadlines, revisions, addenda, and estimate updates., • Communicate with internal team members to clarify scope, quantities, and project requirements., • Maintain organized records of estimates, vendor pricing, and project documents., • Support project managers and senior team members as needed. Requirements: • Minimum 2 years of experience in construction estimating or a related construction role., • Experience reviewing drawings, specifications, scopes of work, and bid documents., • Ability to assist with quantity takeoffs and cost estimates., • Strong attention to detail and accuracy with numbers., • Good organizational and time-management skills., • Proficiency with email, spreadsheets, and general computer tools., • Strong communication skills., • Ability to manage multiple requests and deadlines., • Ability to work full-time in person in New York, NY. Nice to Have: • Experience with high-end residential, hospitality, interior construction, or luxury build-outs., • Experience with Excel, Google Sheets, Bluebeam, PlanSwift, Procore, or estimating software., • Ability to read architectural or construction drawings., • Familiarity with construction materials, trades, and subcontractor scopes., • Associate degree or bachelor’s degree in Construction Management, Engineering, Architecture, or a related field. If you have at least 2 years of construction estimating experience and want to grow your career working on high-end residential and hospitality projects, we encourage you to apply.

Job Description Summary A growing mechanical contractor is seeking an experienced Senior HVAC Estimator to lead estimating efforts across commercial mechanical construction projects. The company focuses heavily on commercial HVAC systems and design-build delivery for complex commercial environments. The ideal candidate has strong commercial HVAC estimating experience, understands mechanical systems in detail, and can lead estimates from conceptual budgeting through final bid submission. Key Responsibilities • Lead estimating efforts for commercial HVAC and mechanical projects, • Prepare conceptual budgets and hard-bid estimates, • Perform material and labor takeoffs from MEP drawings and specifications, • Review plans, specs, and scope documents to identify gaps and risk factors, • Coordinate with engineers, project managers, and operations teams, • Solicit, review, and level subcontractor and vendor pricing, • Develop proposals, budgets, and scope clarifications, • Support design-build preconstruction and value engineering efforts, • Review estimate accuracy, labor productivity, and cost history, • Assist with turnover and preconstruction planning with operations teamsRequirements, • 5–10+ years of HVAC estimating experience, • Strong background in commercial mechanical construction required, • Experience with large commercial HVAC systems and equipment, • Design-build estimating experience strongly preferred, • Ability to read and interpret MEP drawings and specifications, • Proficiency with Bluebeam, Excel, and estimating software, • Strong communication, leadership, and organizational skills, • Experience mentoring junior estimators is a plusCompensation & Benefits, • Medical, dental, and vision insurance, • 401(k), • Paid holidays and PTO, • Long-term growth within a stable mechanical contractor, • Strong pipeline of commercial HVAC projects