Dc government jobs in Inglewood, CaliforniaCreate job alerts

MANTECH seeks a motivated and detail-oriented Senior System Safety Engineer to join our team in El Segundo, CA. The Senior System Safety Engineer will help protect our national security while supporting the USSF Space Systems Command (SSC) Space Access Directorate at Los Angeles Air Force Base. This role is critical to National Security Space (NSS) launch system acquisition and operations, ensuring that mission-critical systems meet all safety and environmental requirements. You will serve as a technical expert, coordinating orbital safety products and providing essential oversight to identify, assess, and mitigate hazards across the launch lifecycle. Responsibilities include but are not limited to: • Evaluating and updating System Safety documentation, including System Safety Management Plans (SSMP) and Programmatic Environmental Safety and Health Evaluations (PESHE), to ensure compliance with DoD and Air Force requirements, • Drafting and coordinating orbital safety products for all NSS launches, including Space Debris Assessment Reports (SDARs) and Orbital Debris Mitigation Standard Practices (ODMSP) documentation, • Providing acquisition support by drafting and assessing safety-related content in Performance Work Statements, Contract Data Requirements List (CDRL) items, and System Performance Requirements Documents, • Assisting the Debris Characterization (DC) project manager with the coordination of airborne assets to collect data for root cause determination in the event of a catastrophic mishap, • Performing general system safety tasks, including the interpretation of requirements, assessment of contractor safety submittals, and the development of technical summary reports for customer presentation, • Interfacing with technical representatives from Range Safety, FFRDC (The Aerospace Corporation), Launch Service Providers, and other Government agencies to ensure mission alignment, • Conducting Day-of-Launch Mishap Control Center (MCC) operations, including the preparation of documentation, checklists, and real-time operational support Minimum Qualifications: • Bachelor’s degree in Engineering (relevant military or industry experience may be considered in lieu of degree), • 7+ years of STEM experience in relevant fields, with at least 3 years of NSSL, Launch/Range, DoD, NASA, or industry equivalent systems safety experience, • Proven experience interfacing with computer-based database and schedule tools, as well as Adobe Acrobat Preferred Qualifications: • Experience with DoD and Air Force system safety documents such as AFI 91-202, MIL-STD-882E, and AFSPCMAN 91-710, • Working knowledge of range safety requirements for Space Launch Delta 45 and 30, including Space Vehicle System Safety design and the SSC/AATS Safety Review process, • Experience with Environmental Compliance/NEPA, Orbital Debris Mitigation Standard Practices, and Nuclear or radiation safety, • Demonstrated proficiency in utilizing JIRA and Confluence for project management and documentation, • Excellent written and oral communication skills with the ability to present information effectively in virtual and in-person environments Clearance Requirements: • Must have or be able to obtain and maintain an active DoD TS/SCI security clearance with a current investigation. Physical Requirements: • Must be able to remain in a stationary position 50%., • Needs to occasionally move about inside the office to access file cabinets, office machinery, etc., • Constantly operates a computer and other office productivity machinery, such as a calculator, copy machine, and computer printer., • Frequently communicates with co-workers, management, and customers, which may involve delivering presentations. Must be able to exchange accurate information in these situations.

RELOCATION ASSISTANCE: No relocation assistance available CLEARANCE REQUIRED FOR START: No CLEARANCE TYPE: None TRAVEL: Yes, 25% of the Time Description At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work — and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Expand your horizons, advance your career, and contribute to a secure future for generations. Northrop Grumman's Space Sector invites you to bring your pioneering spirit to our collaborative teams. As a Supplier Performance Specialist – Level 3, you'll be a linchpin in missions of paramount importance, defining the art of the possible from day one. The position may be based onsite in one of the following locations: Dulles, VA Redondo Beach, CA This role serves as the primary interface between the Global Supply Chain Organization and key component supplier partners located in Dulles, VA, and the greater DC/Maryland/Virginia area or the Redondo Beach, CA area. We offer a hybrid work arrangement. Frequent local supplier partner site visits are required to monitor progress, attend reviews, and participate in meetings. Additionally, up to 25% travel beyond the local region is required for other supplier partner visits, all-hands meetings, etc. Relocation assistance will not be offered for this position. The Supplier Performance Specialist (SPS) is responsible for measuring, analyzing and managing the performance of critical and non-critical suppliers in an effort to reduce cost, alleviate risk and drive continuous improvement. In addition, the SPS shall be a lead for the integrated product team (IPT) for a given product line. The SPS shall be accountable through the Global Supply Chain Program Management team to the program office for the schedule performance, risk mitigation and failure resolution and business relations with his/her assigned suppliers. He/she will be responsible for the overall management of the performance of the assigned suppliers. The SPS shall be responsible for the coordination of all internal matters in order to preclude redundant or ambiguous communication with, or direction to his/her assigned suppliers. SPS are not warranted by the company to provide any contractual direction to the suppliers. Job duties: Supplier Performance Management to ensure the supplier provides a quality product, delivers on time to the contractual need date, and tracks delivery of hardware from award through green tag. This position does not have a Delegation of Procurement Authority. Any and all contractual directions must be handled by the designated Subcontract Administrator. Supplier Meetings: Will coordinate, attend and lead all Supplier Meetings as it relates to non-contractual direction. Facilitate the MRB/FRB activities with Suppliers. If a supplier is late on delivery, will work with supplier to develop a recovery plan. Program Status: Responsible for providing weekly program status based on supplier’s components, including attending internal program status meetings. Subcontract Data Requirement List (SDRL) Management, includes tracking of due SDRLs from suppliers, receipt, disposition and communication of disposition with supplier. Reviews Supplier’s Statement of Work (SOW) Development and Identification of alternative sources. SPS will have a knowledge of the market space for a given product line, including supplier fact finding trips and supplier capabilities assessment. Supplier Scorecards: Responsible for providing quarterly supplier scorecards to suppliers, including discussions/mitigation plan for any late deliveries. Coordinates with internal technical team to resolve supplier issues. Coordinates with Subcontract Administrator for any negotiations and/or contractual modifications. Key Performance Indicators: Responsible for Supplier On Time Delivery (OTD) metric. Basic Qualifications: Bachelor’s degree and 5+ years of experience in supply chain, contracts, and/or supplier performance. Or in lieu of a degree, 9 years of experience in supply chain, contracts, and/or supplier performance. Ability to travel at least 25% of time Preferred Qualifications: Aerospace experience Experience with Key Performance Indicators Experience with Supplier Scorecards Curious about all the exciting developments with the Northrop Grumman Space Sector? Click the link below: Primary Level Salary Range: $91,200.00 - $136,800.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit . U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

About the Role Miller Ink is looking to hire a full-time Account Executive in DC, New York or Los Angeles, who thrives in a collaborative, fast-paced, and growth-oriented work environment. This is a role with significant potential for advancement. We offer a competitive salary and benefits. Responsibilities • Account management: Serve as the lead client contact – and manage account teams to develop and implement strategic communications plans across multiple platforms that meet and exceed objectives., • Team management: Manage associates, creative service professionals, and other Miller Ink vendors., • Media: Manage and cultivate strong relationships with reporters; develop and implement media strategy., • Writing: Draft and edit op-eds, talking points, and social media content. Qualifications • Bachelor’s degree plus at least 4 years relevant professional experience in public relations, communications, journalism, government, political campaigns, media, or another related field., • Excellent organizational skills with a keen attention to detail., • Exceptional research, writing, and editing skills., • Experience in crisis management/crisis communications is a plus., • Strong knowledge of digital strategy., • First-rate interpersonal skills with the ability to connect well with clients and colleagues alike., • Proven ability to work independently and manage multiple projects simultaneously., • Strong working knowledge of the Microsoft Suite of applications required. Required Skills • Excellent organizational skills with a keen attention to detail., • Exceptional research, writing, and editing skills., • Strong knowledge of digital strategy., • First-rate interpersonal skills with the ability to connect well with clients and colleagues alike., • Strong working knowledge of the Microsoft Suite of applications required. Preferred Skills • Experience in crisis management/crisis communications is a plus. Equal Opportunity Statement Miller Ink is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

Our client, a fast-growing AI company utilizing the latest technology in supporting the aerospace and defense industries has exclusively engaged us to identify an Associate General Counsel, Government Contracts to join its growing legal team. Qualified candidates will have 10+ years of experience with government contracts and a deep working knowledge of FARS/DFARs, negotiating, advising on both prime contracts and subcontracts, as well as understanding of government contracting principles. This is an excellent ground floor opportunity with a growing company at the beginning of building out a legal team. Candidates coming from either a law firm or in-house environment will be considered. The role includes competitive compensation (including equity) and full corporate benefits. Note that the hire is expected to be in office – either in LA or DC. For immediate consideration, please apply here or submit your resume to (for a complete listing of our job posts, please visit us at ).

NOTE: This position must be performed in Washington, DC so relocation to Washington, DC will be required. Recruitment Incentive: Applicants may be eligible for a $75,000 recruitment incentive in accordance with regulatory requirements. Click apply to view full details and eligibility of this recruitment incentive. At their core, those who join the Secret Service are courageous, intelligent, strong and determined. A diverse team capable of balancing our investigative mission and fulfilling our protective legacy. Proven to be worthy of trust and confidence. Be tomorrow's Secret Service. Duties During the course of their careers, Secret Service Police carry out assignments in protection. Duties include: • Providing protection for The White House Complex, The Vice President's Residence, The Main Treasury Building and Annex, and foreign diplomatic missions and embassies in the Washington, D.C. area., • Traveling in support of the Presidential, Vice Presidential, and foreign heads of state/government missions., • U.S. citizenship is required., • Possess a current valid U.S. driver's license., • Must be at least 21 years old at the time of application and under 40 at referral. Exceptions may apply for those with current or prior service in federal law enforcement positions covered by special retirement provisions. The Secret Service has determined that age is essential to the performance of this position., • Carry and use a firearm. Maintaining firearm proficiency is also mandatory., • Possess uncorrected visual acuity of no worse than 20/100 binocular. Possess corrected visual acuity of 20/20 or better in each eye., • Hearing loss, as measured by an audiometer, must not exceed 25 decibels (A.S.A. or equivalent I.S.O.) in either ear in the 500, 1000, and 2000 Hz ranges. Applicants must be able to hear the whispered voice at 15 feet with each ear without the use of a hearing aid., • Submit to a drug test prior to your appointment and random drug testing while you occupy the position., • Complete 12 weeks of intensive training at the Federal Law Enforcement Training Center (FLETC) in Glynco, GA or Artesia, NM and 17 weeks of specialized training at the James J. Rowley Training Center in Laurel, MD., • Certify that you have registered with the Selective Service System or are exempt from having to do so, if you are a male applicant born after December 31, 1959.

NOTE: This position must be performed in Washington, DC so relocation to Washington, DC will be required. Want to apply Read all the information about this position below, then hit the apply button. Recruitment Incentive: Applicants may be eligible for a $75,000 recruitment incentive in accordance with regulatory requirements. Click apply to view full details and eligibility of this recruitment incentive. At their core, those who join the Secret Service are courageous, intelligent, strong and determined. A diverse team capable of balancing our investigative mission and fulfilling our protective legacy. Proven to be worthy of trust and confidence. Be tomorrow's Secret Service. Duties During the course of their careers, Secret Service Police carry out assignments in protection. Duties include: * Providing protection for The White House Complex, The Vice President's Residence, The Main Treasury Building and Annex, and foreign diplomatic missions and embassies in the Washington, D.C. area. * Traveling in support of the Presidential, Vice Presidential, and foreign heads of state/government missions. * Enforcing mandated protective responsibilities as described under Title 18, United States Code, Section 3056A. Requirements * U.S. citizenship is required. * Possess a current valid U.S. driver's license. * Must be at least 21 years old at the time of application and under 40 at referral. Exceptions may apply for those with current or prior service in federal law enforcement positions covered by special retirement provisions. The Secret Service has determined that age is essential to the performance of this position. * Carry and use a firearm. Maintaining firearm proficiency is also mandatory. * Possess uncorrected visual acuity of no worse than 20/100 binocular. Possess corrected visual acuity of 20/20 or better in each eye. * Hearing loss, as measured by an audiometer, must not exceed 25 decibels (A.S.A. or equivalent I.S.O.) in either ear in the 500, 1000, and 2000 Hz ranges. xibtplm Applicants must be able to hear the whispered voice at 15 feet with each ear without the use of a hearing aid. * Submit to a drug test prior to your appointment and random drug testing while you occupy the position. * Complete 12 weeks of intensive training at the Federal Law Enforcement Training Center (FLETC) in Glynco, GA or Artesia, NM and 17 weeks of specialized training at the James J. Rowley Training Center in Laurel, MD. * Certify that you have registered with the Selective Service System or are exempt from having to do so, if you are a male applicant born after December 31, 1959.

NOTE: This position must be performed in Washington, DC so relocation to Washington, DC will be required. If you want to know about the requirements for this role, read on for all the relevant information. Recruitment Incentive: Applicants may be eligible for a $75,000 recruitment incentive in accordance with regulatory requirements. Click apply to view full details and eligibility of this recruitment incentive. At their core, those who join the Secret Service are courageous, intelligent, strong and determined. A diverse team capable of balancing our investigative mission and fulfilling our protective legacy. Proven to be worthy of trust and confidence. Be tomorrow's Secret Service. Duties During the course of their careers, Secret Service Police carry out assignments in protection. Duties include: Providing protection for The White House Complex, The Vice President's Residence, The Main Treasury Building and Annex, and foreign diplomatic missions and embassies in the Washington, D.C. area. Traveling in support of the Presidential, Vice Presidential, and foreign heads of state/government missions. Enforcing mandated protective responsibilities as described under Title 18, United States Code, Section 3056A. Requirements U.S. citizenship is required. Possess a current valid U.S. driver's license. Must be at least 21 years old at the time of application and under 40 at referral. Exceptions may apply for those with current or prior service in federal law enforcement positions covered by special retirement provisions. The Secret Service has determined that age is essential to the performance of this position. Carry and use a firearm. Maintaining firearm proficiency is also mandatory. Possess uncorrected visual acuity of no worse than 20/100 binocular. Possess corrected visual acuity of 20/20 or better in each eye. Hearing loss, as measured by an audiometer, must not exceed 25 decibels (A.S.A. or equivalent I.S.O.) in either ear in the 500, 1000, and 2000 Hz ranges. xkddfxh Applicants must be able to hear the whispered voice at 15 feet with each ear without the use of a hearing aid. Submit to a drug test prior to your appointment and random drug testing while you occupy the position. Complete 12 weeks of intensive training at the Federal Law Enforcement Training Center (FLETC) in Glynco, GA or Artesia, NM and 17 weeks of specialized training at the James J. Rowley Training Center in Laurel, MD. Certify that you have registered with the Selective Service System or are exempt from having to do so, if you are a male applicant born after December 31, 1959.

Job DescriptionOF COUNSEL – TRANSACTIONAL ANTITRUST Locations: Atlanta, Austin, Baltimore, Boston, Chicago, Dallas, Houston, Los Angeles, Miami, New York, Palo Alto, Philadelphia, Reston, San Diego, San Francisco, Seattle, Short Hills, Washington, DC, Wilmington Direct Counsel is seeking an experienced Of Counsel, Transactional Antitrust Attorney to join a top-tier, global law firm with a nationally recognized Antitrust & Competition practice. This role is designed for a seasoned antitrust specialist with deep experience in Hart-Scott-Rodino (HSR) filings and transactional antitrust matters. The attorney will collaborate closely with a national team to support complex mergers, acquisitions, and joint ventures across industries. Key Responsibilities * Lead and prepare HSR filings and related antitrust submissions. * Advise clients on antitrust risks in connection with: * Mergers and acquisitions * Joint ventures * Strategic transactions * Collaborate with antitrust colleagues nationwide on transactional matters. * Supervise and mentor associates as needed. * Communicate directly with clients and provide strategic guidance. * Coordinate with economists, consultants, and other experts on antitrust issues. * Assist with fact development, regulatory inquiries, and depositions. * Review and draft discovery responses, briefs, motions, and memoranda. * Contribute to case strategy and regulatory planning. * Support global merger control processes and filings as applicable. Qualifications * JD from an accredited law school. * Active bar admission in at least one U.S. jurisdiction. * 8+ years of direct, applicable antitrust experience, ideally from an Am Law 100 firm. * Substantial experience preparing and managing HSR filings. * Familiarity with global merger control regimes. * Government antitrust experience is preferred but not required. * Strong legal research, analytical, and writing skills. * Excellent communication and interpersonal skills. * Ability to work independently with minimal supervision while collaborating effectively with teams. * Strong project management skills and attention to detail. * Ability to manage multiple priorities in a fast-paced environment. Location * Open to multiple U.S. offices, including major markets nationwide. * Hybrid work environment with regular in-office presence and flexibility for remote work. Compensation & Benefits * Highly competitive compensation, commensurate with experience and geographic market. * Comprehensive benefits package, including: * Medical, dental, and vision insurance * 401(k) and retirement benefits Additional Information * This position offers the opportunity to work on high-profile, sophisticated antitrust matters with a collaborative national team. * Role scope and responsibilities may evolve based on firm and client needs. * Equal opportunity employer.

Job DescriptionISSOEmployment Type: Full-Time, Experienced Department: Information Technology CGS is seeking an Information Systems Security Officer (ISSO) with DIACAP and/or RMF experience who has deep expertise in security assessment documentation to support Dept. of Commerce systems and efforts to achieve their Authorization to Operate (ATO). This position is located at the client site in the Herbert Hoover building in Washington, DC. The scope of this position includes full life-cycle Assessment and Authorization (A&A) management through all 6 Steps of the RMF process in support of the Government ISSM.In this role, you’ll conduct security assessment, and information system security oversight activities in accordance with NIST 800.53 that support systems from the perspective RMF requirements. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:- Review systems to identify potential security weaknesses and recommend improvements to amend vulnerabilities, implement changes, and document upgrades. - Maintain responsibility for managing cybersecurity risk from an organizational perspective. - Identify organizational risks, prioritize those risks, and maintain a risk registry for escalating and presenting those risks to senior leadership.- Provide security guidance and IS validation using the National Institute of Standards and Technology (NIST) RMF, DoC, and local security policies.- Providing configuration management (CM) recommendations for information system security software, hardware, and firmware and coordinating changes and modifications with the ISSM, Security Control Assessor (SCA), and Authorizing Official (AO).- Maintain vulnerability scanning tool compliance, such as HBSS or ACAS, and patch management, such as IAVM to ensure IT staff pushes patches to all systems in an effort to maintain compliance with all applicable directives, manage system changes, and assess the security impact of those changes.- Support security authorization activities, including transitioning from the legacy Information Assurance Certification and Accreditation Process (DIACAP) to compliance with the DoC RMF.- Provide subject matter expertise for cyber security and trusted system technology. - Apply advanced technical knowledge and analysis of specialized functional areas in task requirements to develop solutions to complex problems.- Research, write, review, disposition feedback, and finalize recommendations regarding cyber security policy, assessment and authorization assessments (A&As), security test and evaluation reports, and security engineering practices and processes. - Conduct research and write risk assessment reports to include risk thresholds, evaluation, and scoring.- Support analysis of the findings and provide expert technical guidance for mitigation strategies, including implementation advice on the cyber security risk findings, and other complex problems. Qualifications:- Bachelor’s Degree.- A minimum of five (5) years experience as an Information Assurance (IA) Analyst, ISSE, ISSO, or similar role in ATO package development, including generating security documentation for requirements, security control assessment, STIG and IAVA compliance, Standard Operating Procedures, test results, etc.- eMASS experience.- Professional security certification such as: CCNA Security, CySA+, GICSP, GSEC, CompTIA Security+ CE, SSCP, or higher.- Strong desktop publishing skills using Microsoft Word and Excel.- Experience with industry writing styles such as grammar, sentence form, and structure.- Ability to multi-task in a deadline-oriented environment. Ideally, you will also have:- CISSP, CASP, or a similar certificate is preferred.- Master's Degree in Cybersecurity or related field.- Strong initiative, detail orientation, organizational skills, and aptitude for analytical thinking.- Demonstrated ability to work well independently and as a part of a team.- Excellent work ethic and a high commitment to quality. Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work. Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.Health, Dental, and VisionLife Insurance401kFlexible Spending Account (Health, Dependent Care, and Commuter)Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation!Explore additional job opportunities with CGS on our Job Board: more information about CGS please visit: or contact:Email: #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description ABOUT GREENPEACE Greenpeace is a global, independent campaigning organization that uses peaceful protest, creative communication and people power to expose global environmental problems and promote solutions that are essential to a green and peaceful future. In just the past year, we've secured a Global Oceans Treaty to protect wildlife and people who depend on healthy oceans. We persuaded the Biden Administration to phase out single-use plastics from federal operations. And we safeguarded healthy spaces, from national marine sanctuaries to bans on seabed mining to stopping liquefied national gas terminals poisoning Gulf Coast communities. Our work spans more than 50 years of fights and successes. As an independent campaigning organization, Greenpeace does not accept funds from any corporations or government entities. The global Greenpeace network is headquartered in the Netherlands, with offices around the world in over fifty countries. Greenpeace USA is headquartered in Washington, DC. POSITION SUMMARY The Communications Specialist (12-month contract) will coordinate and implement communications strategies to connect Greenpeace's campaign messages and overall mission with key targeted audiences. This position requires the ability to work independently and in collaboration with Senior Communications Strategists and the Communications Director, Media. The Communications Specialist will support the media team with day-to-day communications — which may include internal/external messaging, responding to media requests, drafting content (e.g. press releases, talking points), coordinating events, and handling rapid response needs in consistent alignment with GPUS branding and messaging and organizational goals and mission. The Communications Specialist (12-month contract) is an exempt, full-time, benefits-eligible, contract position, and is represented by the Progressive Workers Union. This role may be based in any GPUS-authorized location (CA, DC, MD, VA, NY, NJ, CT), and will report to the Communications Director, Media. ROLE RESPONSIBILITIES Strategic Implementation: • Implement established communication plans and strategies that support campaign and organizational objectives, including in rapid response and breaking news scenarios., • Support and organize team efforts toward communication outputs across multiple platforms, including social, emerging, and traditional media., • Aid in the operations, organization, planning and responsiveness of the media team., • Track breaking news and current events, and assist with disseminating timely information to the team during rapid response moments, in collaboration with the media team., • Draft and edit materials including press releases, press advisories, op-eds, letters to the editor, fact sheets, and talking points., • Respond to media inquiries and coordinate interviews., • Track media coverage, pull analytics, and provide monthly reports., • Build relationships with reporters, producers, podcasters, and other news decision-makers in the United States., • Assist with briefing and training Greenpeace employees to act as spokespeople. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Other duties and responsibilities may be assigned by the manager, as organizational or team priorities arise and/or shift. ROLE REQUIREMENTS Knowledge and Experience: • Minimum 2 years experience working in PR, at a media outlet, or as a content creator with demonstrated ability to secure earned media., • B.A. or B.S. in a relevant communication field, or comparable communications experience, • Basic understanding of the main social media platforms., • Experience drafting and editing content (e.g. writing press releases, crafting posts/emails, assisting with campaigns), in alignment with brand and messaging guidelines., • Experience with basic workflows of a media relations team (e.g. monitoring media, managing editorial calendars)., • Basic understanding of media relations, crisis communications, and building public awareness., • High media-literacy and a strong news diet – having the ability to contextualize organizational goals within broader current events., • Strong writing/editing skills, with a focus on AP style., • Attention to detail, necessary for ensuring accuracy and consistency in all materials and resources., • Strong verbal communication and proficiency., • Problem-solving and creative thinking skills to resolve issues and handle challenges., • Organized and deadline-efficient with the ability to manage competing priorities and projects in a dynamic environment., • Adaptive and responsive to changing needs and technologies., • Resilience to work well in rapid response moments and in the public eye., • Strong interpersonal skills for building relationships with stakeholders, networking in coalition and understanding audience reactions., • Collaborative and able to work effectively within a diverse team and with independent thinkers., • Fluency in written and spoken English, • Spanish fluency preferred, but not required, • Willingness and ability to travel domestically and internationally, as needed. Greenpeace offers a competitive benefits package including medical, dental and vision coverage with low contributions from staff. We have options for pre-tax flexible spending accounts for medical and dependent care costs. Greenpeace employees enjoy generous 401K matching and time-off for vacation, sick, personal, and parental leave. After five years, staff are eligible for a paid sabbatical. To encourage public transportation use and biking, we offer subsidies for staff who choose to bike or ride mass transit to work. Greenpeace is committed to the growth and development of staff and fostering a creative workplace culture. For more information, check out our benefits plan. This role is graded at a level 2, and a salary within the range of $63,410 - $68,632 is anticipated to be provided to the successful candidate having met the minimum requirements for the position consistent with reflecting our commitment to maintaining competitive and fair compensation practices. If you want to save the world from climate change and believe in environmental and social justice, please submit an application on our careers page. Applications will be reviewed on a rolling basis and will conclude once we have found the best candidate. Greenpeace is an Equal Opportunity Employer and does not discriminate on the basis of race, color, class, sex, gender, sexual orientation, disability, family/marital status, religion or other protected classes. We strongly encourage applications from marginalized communities. If you require assistance applying to this opportunity, please contact . Only applicants eligible to work and live in the United States without any legal restrictions need apply for this opportunity.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are seeking a Senior Power Electronics Engineer I (2025225) to join our growing spacecraft payload development team. In this position, you will contribute across the entire development life cycle of next-generation power electronics hardware for satellites and space power systems payloads—from working to define power system architectures and trade studies to detailed circuit design, simulation, printed circuit board (PCB) layout, verification and integration testing, production transition, and manufacturing support. JOB DUTIES AND RESPONSIBILITIES • Define electrical power system architecture, and derive power subsystem requirements, • Design DC-DC power converters, power management and control circuits from concept to production release, • Perform detailed design for low to high complexity analog and power electronics circuits ranging from single DC-DC power converters to multi-output power supply modules, • Perform modeling and analysis of analog and power electronics designs including worst-case circuit analysis (WCA), stress analysis, small signal modeling analysis, failure modes and effects analysis (FMEA), reliability analysis, and power integrity analysis, • Develop design verification test plans, requirement compliance matrices, system integration and qualification test plans, and production acceptance test plans for power converters and power supply designs, • Perform board bring-up and design verification testing of analog and power electronics circuits, • Perform system integration, qualification testing, and production release of power supply modules and power systems, • Perform research and monitor power electronics industry trends to drive innovation and generate intellectual property in this area JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Bachelor of Science (BS) degree or higher in Electrical Engineering from an accredited university, • Minimum of 4 years of experience designing analog and power electronics, • Experience with power stage design ofcommon DC-DC power converter topologies (e.g. discrete linear regulators, Buck, Boost, Buck-boost, Flyback), • Experience with voltage mode control and peak current mode control modeling and characterization for DC-DC converters, • Knowledge of control theory and stability of power electronics, including experience characterizing control loops and impedances in the laboratory, • Experience designing power filters for low noise outputs and for power line electromagnetic compatibility (EMC), • Hands-on experience with testing and troubleshooting electronics and power converters using laboratory instruments such as oscilloscopes, impedance analyzers, spectrum analyzers, electronic loads, and signal generators, • Experience with electronics schematic capture and printed circuit board (PCB) layout tools such as Altium, OrCAD, Allegro or Xpedition, • Experience with analysis and simulation tools such as SPICE, LTSPICE, SIMetrix/SIMPLIS, PLECS, Simulink, MATLAB, MathCAD, ANSYS Q3D and SiWave, or HyperLynx, • Excellent written and verbal communication skills PREFERRED EXPERIENCE, • Master of Science or PhD in Electrical Engineering with research focus in power electronics, • Experience designing high-reliability analog and power electronics for automotive, space or defense applications, • Knowledge of space radiation environments and radiation effects in electronics, • Experience in power electronics applications utilizing GaN or SiC wide bandgap power semiconductor devices, • Experience developing design verification test plans, requirement compliance matrices, system integration and qualification test plans, and production acceptance test plans, • Experience performing worst-case circuit analysis (WCA), stress analysis, failure modes and effects analysis (FMEA), and reliability analysis for power supplies, • Experience running board-level power integrity simulation using tools such as Ansys SiWave, or HyperLynx, • Experience with power magnetics modeling, design and laboratory characterization, • Knowledge of soft switching and resonant power converter topologies (e.g. LLC, CLLC, series resonant, phase shifted full bridge, dual active bridge, etc.), • Knowledge of power stage design for inverters and motor drives, • Experience with advanced control schemes for DC-DC power converters (e.g. constant on-time control, boundary mode control, average current mode control)

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are seeking a Senior Power Electronics Engineer II (2025140)to join our growing spacecraft payload development team. In this position, you will contribute across the entire development lifecycle of next-generation power electronics hardware for satellites and space power systems payloads—from leading the definition of power system architectures and trade studies to detailed circuit design, simulation, printed circuit board (PCB) layout, verification and integration testing, production transition, and manufacturing support. DUTIES AND RESPONSIBILITIES * Define electrical power system architecture, and derive power subsystem requirements * Design DC-DC power converters, power conditioning, power management and control circuits from concept to production release * Perform detailed design for low to high complexity analog and power electronics circuits ranging from single DC-DC power converters to multi-output power supply modules * Perform modeling and analysis of analog and power electronics designs including worst-case circuit analysis (WCA), stress analysis, small signal modeling analysis, failure modes and effects analysis (FMEA), reliability analysis, and power integrity analysis * Develop design verification test plans, requirement compliance matrices, system integration and qualification test plans, and production acceptance test plans for power converters and power supply designs * Lead board bring-up and design verification testing of power electronics circuits and modules * Lead system integration, qualification campaigns, and release of analog and power electronics designs into production * Mentor younger engineers and foster knowledge sharing * Perform research and monitor power electronics industry trends to drive innovation and generate intellectual property in this area REQUIREMENTS AND MINIMUM QUALIFICATIONS * Bachelor of Science (BS) degree or higher in Electrical Engineering (or related) from an accredited university * Minimum of 6 years of experience designing analog and power electronics * Experience working with electrical power systems and subsystems, including developing power architecture and power requirements, performing trade studies for size, weight, power, and cost optimization (SWAP-C), selecting power converter topologies, and defining power management and control blocks * Experience with power stage design of common DC-DC power converter topologies (e.g. discrete linear regulators, Buck, Boost, Buck-boost, Flyback, Forward) * Experience with voltage mode control and peak current mode control modeling and characterization for DC-DC converters * Knowledge of control theory and stability of power electronics, including experience characterizing control loops and impedances in the laboratory * Experience designing power filters for low noise outputs and for power line electromagnetic compatibility (EMC) * Experience developing design verification test plans, requirement compliance matrices, system integration and qualification test plans, and production acceptance test plans * Experience performing worst-case circuit analysis (WCA), stress analysis, failure modes and effects analysis (FMEA), and reliability analysis for power supplies * Extensive hands-on experience with testing and troubleshooting electronics and power converters using laboratory instruments such as oscilloscopes, impedance analyzers, spectrum analyzers, electronic loads, and signal generators * Experience with electronics schematic capture and printed circuit board (PCB) layout tools such as Altium, OrCAD, Allegro or Xpedition * Experience with analysis and simulation tools such as SPICE, LTSPICE, SIMetrix/SIMPLIS, PLECS, Simulink, MATLAB, MathCAD, ANSYS Q3D and SiWave, or HyperLynx * Excellent written and verbal communication skills PREFERRED EXPERIENCE * Master of Science or PhD in Electrical Engineering with research focus in power electronics * Experience designing high-reliability analog and power electronics for automotive, space or defense applications * Knowledge of space radiation environments and radiation effects in electronics * Experience in power electronics applications utilizing GaN or SiC wide bandgap power semiconductor devices * Experience running board-level power integrity simulation using tools such as Ansys SiWave, or HyperLynx * Experience designing custom signal and power magnetics, and power filters for low noise and electromagnetic compatibility (EMC) * Knowledge of soft switching and resonant power converter topologies (e.g. LLC, CLLC, series resonant, phase shifted full bridge, dual active bridge, etc.) * Knowledge of power stage design for inverters and motor drives * Knowledge of modeling and control of inverters and motor drives * Experience with advanced control schemes for DC-DC power converters (e.g. voltage mode with feedforward control, constant on-time control, V2 constant on-time control, phase shift modulation, average current mode control) * Experience with isolation and grounding, failure mode effects analysis and fault tolerant design, and thermal management of power electronics * Programming skills to support hardware test and data processing (Python, MATLAB, etc.) CesiumAstro considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate’s work experience, education/training, and key skills. Full-time employment offers include company stock options and a generous benefits package including health, dental, vision, HSA, FSA, life, disability and retirement plans. CesiumAstro is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. Please note: CesiumAstro does not accept unsolicited resumes from contract agencies or search firms. Any unsolicited resumes submitted to our website or to CesiumAstro team members will be considered property of CesiumAstro, and we will not be obligated to pay any referral fees. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are seeking a Principal Power Electronics Engineer I to join our growing satellite communication (SATCOM) terminal development team. In this position, you will contribute across the entire development lifecycle of next-generation power electronics hardware for military and commercial power systems—from leading the definition of power system architectures and trade studies to detailed circuit design, simulation, printed circuit board (PCB) layout, verification and integration testing, production transition, and manufacturing support. JOB DUTIES AND RESPONSIBILITIES • Lead the development of power system architectures and derive power subsystem requirements, • Design DC-DC power converters, power supplies, and power distribution systems ranging from a few watts to more than 20 kW of power in the 0.8 V to 400 V range, • Design single-phase and three-phase AC-DC power supplies and power distribution systems ranging from a few kilowatts to more than 20 kW, • Perform comprehensive analysis of AC-DC and DC-DC power supplies including worst-case circuit analysis (WCA), stress analysis, small signal modeling analysis, failure modes and effects analysis (FMEA), reliability analysis, and power integrity analysis, • Develop design verification test plans, requirement compliance matrices, system integration and qualification test plans, and production acceptance test plans for power converters and power supplies, • Lead board bring-up and design verification testing of analog and power electronics circuits, • Lead system integration, qualification campaigns, and production release of power supply modules and power systems, • Mentor younger engineers and foster knowledge sharing, • Lead a small team of power electronics engineers to drive project execution JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Bachelor of Science (BS) degree or higher in Electrical Engineering from an accredited university., • Minimum of 9 years of experience designing analog and power electronics, • Experience working with electrical power systems and subsystems, including developing power architecture and power requirements, performing trade studies for size, weight, power, and cost optimization (SWAP-C), selecting power converter topologies, and defining power management and control blocks, • Experience designing, testing and qualifying single-phase and three-phase off-line AC-DC power supplies, and DC-DC power supplies for industrial, airborne, or military systems, • Knowledge of control theory and stability of power electronics, including experience characterizing control loops and impedances in the laboratory, • Experience designing power filters for low noise outputs and for power line electromagnetic compatibility (EMC), • Experience developing design verification test plans, requirement compliance matrices, system integration and qualification test plans, and production acceptance test plans, • Experience performing worst-case circuit analysis (WCA), stress analysis, failure modes and effects analysis (FMEA), and reliability analysis for power supplies, • Extensive hands-on experience with testing and troubleshooting electronics and power converters using laboratory instruments such as oscilloscopes, impedance analyzers, spectrum analyzers, electronic loads, and signal generators, • Experience with analysis and simulation tools such as SPICE, LTSPICE, SIMetrix/SIMPLIS, PLECS, Simulink, MATLAB, MathCAD, ANSYS Q3D and SiWave, or HyperLynx, • Experience with isolation and grounding, failure mode effects analysis and fault tolerant design, and thermal management of power electronics, • Experience designing and testing power electronics units to meet industry standards and requirements in the automotive, industrial, aircraft, or military markets (e.g., FCC, CISPR, UL safety standards, ECSS, NASA, MIL standards), • Excellent written and verbal communication skills PREFERRED EXPERIENCE, • Experience designing and testing isolated and non-isolated DC-DC power converters (e.g. discrete linear regulators, Buck, Boost, Buck-boost, Flyback, Forward), • Experience designing or specifying custom power magnetics for power supplies and power line filters, • Knowledge of power stage design and control methods for power factor correction (PFC) converters and active rectifiers, • Experience generating statements of work and requirements for external vendors, vendor selection, and vendor management for power supply and power system rack developments, • Experience with electronics schematic capture and printed circuit board (PCB) layout tools such as Altium, OrCAD, Allegro or Xpedition, • Experience running board-level power integrity simulation using tools such as Ansys SiWave, or HyperLynx, • Knowledge of soft switching and resonant power converter topologies (e.g. LLC, CLLC, series resonant, phase shifted full bridge, dual active bridge, etc.)

Job Description AnySignal is a startup whose mission is to usher in the next generation of RF products and services. For the most demanding space and defense missions, AnySignal provides a flexible platform with world-class performance that is easy to deploy, monitor, purchase, and upgrade. Our team has a diverse range of backgrounds that cover cloud computing to artificial intelligence, communications and sensing, embedded systems, and much more. As a Digital Electronics Engineer on the hardware team, you will be responsible for owning the design, manufacture, test and deployment of highly integrated PCBAs used by a large number of space customers. You will work with a small team of software, RF hardware, and FPGA engineers to shepherd the product from initial design to vehicle integration, taking a full-stack approach to building robust space communication systems. Responsibilities * Design high-speed digital hardware including processors, FPGAs, memory, interfaces, and supporting circuitry * Perform trades and analyses of board architecture and component selection * Schematic capture and layout of space-grade PCBs * Bring-up and testing of new designs * Partner with RF engineers, software, mechanical, thermal, manufacturing teams and production test teams to drive designs end-to-end * Work with mechanical engineers to ensure proper thermal dissipation of devices * Work with supply chain counterparts to enable rapid manufacture and iteration of components * Design for performance under space-grade acceptance, qualification, and compliance requirements Basic Qualifications * Bachelor’s degree in electrical engineering, computer engineering, physics, or other STEM discipline * 3+ years of professional experience designing high-speed digital circuitry * Proven experience designing boards using EDA tools such as Altium Designer Preferred Experience & Skills * Experience designing and debugging Xilinx RFSoC / MPSoC-based systems or equivalent platforms * Experience debugging SoCs across the bootup stack (baremetal/bootloader/linux) * Experience designing and implementing mixed-signal circuit boards from concept through production using processors, FPGAs, Ethernet, multi-GHz Serdes, DRAM interfaces (DDR4), I2C, SPI, operational amplifiers, analog to digital and digital to analog converters, and power supply components * Deep understanding with configuration and interfacing of memory, volatile and nonvolatile * Familiar with failure mode effects and criticality analysis (FMEA) * Experience designing power trees with complex sequencing requirements * Experience in modeling, simulation, and testing of digital and power electronics * Working experience in voltage and current mode control and compensation design * Strong grasp of DC-DC topologies, with ability to select optimal architectures and components * Familiarity with power supply testing and packaging for harsh environments * Experience selecting and monitoring components capable of performing in a radiation environment In order to comply with the space technology export rules of the U.S. Government, such as the International Traffic in Arms Regulations (ITAR), it is necessary to be a U.S. citizen, a lawful U.S. permanent resident, a protected individual as specified by 8 U.S.C. 1324b(a)(3), or possess eligibility to secure the necessary authorizations from the U.S. Department of State. For additional information on ITAR, please seek further details. AnySignal values and fosters an inclusive, accessible environment, where all employees and customers feel respected, supported and able to participate. We welcome applications from: women, Aboriginal persons, persons with disabilities, ethnic minorities, visible minorities, veterans, people who identify as LGBTQIA2S+ and others who may contribute to diversification in our environment. Should you have a need for accommodation, AnySignal will endeavor to meet your accommodation needs. At any stage of the recruitment and selection process you may make your needs for accommodation known through contacting our team, in confidence, by email to: . We aim to provide equal access to all applicants with disabilities, please do not hesitate to contact us about accommodations. Compensation Range: $130K - $185K

Job Description Bully Pulpit International is an outcomes agency made up of strategists, data scientists, and artists. We come from politics, brands, and government and we communicate without barriers and measure what matters. We have more than 350 team members in six countries and thirteen offices — Berlin, Brussels, Chicago, D.C., London, Los Angeles, New York, Oslo, San Francisco, and Zürich. We apply our unique expertise across strategic communications, public affairs, research, and digital marketing to create sophisticated and customized strategies that make change possible for both American and European clients. • Starting Salary Range: $90,000 - $100,000, • Location: Expectation to work from DC, New York, Chicago, SF or LA offices at least 3 days a week (LA Preferred) The Impact You Will Make We are seeking a full-time Associate Director, who will drive creator partnerships and activations for a diverse client portfolio spanning public affairs, nonprofit and advocacy campaigns, and electoral politics. Reporting to the Head of Creator Partnerships, you will lead end-to-end strategy and execution for your campaigns, harnessing a deep understanding of platforms like TikTok, Instagram, Substack, and Discord to shift key audiences’ attitudes and behaviors. While the Creator team sits on the Paid Media team, your work will integrate traditional paid creator programs and ongoing organic engagements into authentic partnerships that include short-form video, integrations, events, and more. You will be responsible for managing client work streams and delivering high-impact activations that meet rigorous campaign objectives. What the Day-to-Day Looks Like Strategy & Platform Expertise • Lead end-to-end creator campaign strategy and execution, using insights-driven approaches to identify the platforms, creators, and cultural moments that best align with client objectives and reach harder-to-reach audiences., • Serve as a platform expert, staying ahead of trends in social subcultures and emerging platforms to advise internal teams and clients on how to activate them through both organic and paid strategies., • Oversee the daily lifecycle of creator programs, including identification, relationship management, negotiation, contracting, and performance tracking across a tiered ecosystem of creators (ranging from micro-influencers to celebrities)., • Drive operational efficiency by utilizing technology platforms and innovative tools to improve workflows, identification, and campaign measurement., • Drive cross-functional delivery, working with Strategic Communications, Marketing, and Creative teams to ensure creator work is story-first and integrated into the broader campaign narrative., • Partner with Client Services to manage work streams and support pitching and reporting, using cultural fluency to influence client decision-making and articulate strategic value. Requirements • 7+ years of combined social media and creator marketing. Experience within public affairs, political advocacy, or nonprofit sectors is a strong plus., • Deep knowledge of the creator ecosystem from ideation to execution, including hands-on experience with platform-specific strategies., • Strong ability to pitch strategic recommendations and influence both internal stakeholders and senior-level clients., • Proven track record of managing complex client work streams and moving quickly in a high-pressure environment., • Proficiency in using technology platforms for creator identification, management, and workflow optimization. BPI offers a wide range of benefits to U.S.-based employees, including 100% company-paid medical, dental, and vision insurance, a 401(k) program with employer match up to 4%, generous time off for vacation, $50 monthly phone reimbursement, unlimited sick time, and 16 weeks of paid leave for new parents. BPI’s benefits prioritize employee wellness and progressive support to our diverse workforce. We’re looking for all kinds of people. BPI Group is an integrated public affairs agency that delivers outcomes for the top organizations and leaders around the world. With expertise in strategic communications, digital marketing, creative, research, and measurement, we offer a cohesive approach across corporate, policy, and public affairs strategy in today’s interconnected world. By combining incisive strategy and deep tactical expertise, we make change possible. Our transatlantic presence includes offices across eleven markets in the US and Europe. We are an equal opportunity employer and make employment decisions based on individual commitment to excellence. We want to have the best qualified people in every job. All qualified applicants will receive consideration for employment without regard to race, color, ancestry, national origin, religion or religious creed, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, age, marital status, status as a protected veteran, physical or mental disability, medical condition, genetic information or characteristics (or those of a family member) or any other consideration made unlawful by applicable federal, state or local laws. We also consider qualified applicants regardless of criminal histories, consistent with legal requirements. BPI is dedicated to building an inclusive, diverse, equitable, and accessible workplace that fosters a sense of belonging – so if you’re excited about this role but your past experience doesn’t align perfectly with every qualification in the job description, we encourage you to still consider submitting an application. We consider applications holistically and you may be just the right candidate for this role or another one of our openings! Let’s keep in touch. Follow us on LinkedIn and Twitter at bpigroup.com

Job DescriptionCompany Description At Coffman Engineers, we serve as both prime consultant and sub consultant on projects large and small, including commercial, retail, institutional, government, industrial, and project/construction management. Incorporated in 1979, we have employees in more than 23 locations serving clients across the United States and overseas. To meet client objectives and to integrate our many disciplines, we can create teams comprised of civil, structural, mechanical, electrical, fire protection, and corrosion control, as well as project/construction managers and professionals in a variety of specialty services. This ability has made us a leader in the engineering and construction communities, and has strengthened our reputation as being progressive, innovative, and a great place to work. Job Description The right team is more than an advantage, it’s a game changer! Come work with a team of engineering professionals dedicated to excellence at Coffman Engineers Woodland Hills Office. Coffman Engineers is seeking an Senior Electrical Engineer with 10+ years of experience who is passionate about their craft, wants to work on a high-functioning team, and looking for an environment that promotes professional growth. The successful candidate will be enthusiastic, have a desire to work and grow with a multi-discipline engineering team, and be willing to have fun. You would be providing our clients with electrical systems design including power, lighting, load calculations, and coordination with other disciplines. May plan, schedule, conduct or coordinate detailed phases of the professional work as part of a major project or for a total project of moderate scope. May supervise or coordinate the work of other professionals who assist in specific assignments. Compensation and Benefits: • Approximate Base Salary – $125,000 – $160,000 annually., • Paid overtime at 1.0 times hourly rate, • Competitive end of year discretionary bonus based on company/team/personal performance, • Hybrid Work Schedule (subject to change), • 401k with maximum of 5% Contribution Matching for 9% Employee Contribution, • This position is not eligible for sponsorship. Duties • Perform complete construction documents to include drawings, power system studies and specification documentation., • Perform and oversee execution of designs including medium and low voltage AC, DC, single line diagrams, electrical plans and equipment layout., • Perform and oversee execution of lighting design both interior and exterior, calculate foot-candle to ensure lighting design meets IESNA requirements., • Participate in meetings with internal and external customers and provide engineering support through design and construction phases including but not limited to reviewing/ approving shop drawings submittals, responding to RFI’s, and addressing AHJ comments., • Knowledge of Title-24 Part 6 California Energy Conservation Code., • Review deliverables and follow QA/QC process through design and construction phases., • Perform site visits and communicate with architects, contractors, and consulting teams., • Participate in and lead internal team meetings and external client meetings., • Present design approaches to authorities having jurisdictions., • Collaborate with multiple teams across multiple offices in a multi-discipline environment., • Work independently and supervise the efforts of a small team., • Participate in multiple projects simultaneously and profitably., • Maintain a working relationship with clients., • Define problems, collect data, establish facts, and draw valid conclusions., • Perform other duties as may be assigned.Qualifications Minimum Qualifications • BS in Electrical Power engineering or related field, • PE license in Electrical Engineering (licensed for at least 3 years), • Minimum 10 years of experience in electrical design, • Experience with AutoCAD/REVIT, • Experience with OSHPD/HCAi, • Knowledge of Title-24 Part 6 California Energy Conservation Code, • Experience with multi-family, commercial, institutional, and higher education projects, • Experience with Battery Energy Storage System., • Experience with SKM and/or ETAP programs, • Experience with PVsyst software, • Proficiency in Microsoft Outlook, Word, Excel and Adobe/Bluebeam software., • Project Management experience, • Strong problem-solving skills, • Perform project management duties for various MEP design projects., • Prepare design tasks assigned by department manager., • Perform complete construction documents, including drawings, power system studies, and specifications., • Perform and supervise the execution of designs, including medium and low voltage AC, DC, single line diagrams, electrical plans, and equipment layout., • Perform and supervise the execution of both interior and exterior lighting design and calculate footcandle to ensure lighting design meets IESNA requirements., • Participate in meetings with clients and provide engineering support through design and construction phases including responding to AHJ comments, shop drawing review, and responding to RFI’s., • Review of deliverables, including QA/QC through design and construction., • Attend site visits as necessary., • Serve as a technical resource to internal staff., • Able to multi-task and prioritize in a fast-paced environment (or demonstrate ability to develop such abilities)., • Possess strong critical thinking, organizational, and analytical abilities (or demonstrate ability to develop such abilities)., • Positive contributor to overall office and department goals, culture, and morale. Additional Information Why You Want To Work Here Coffman truly focuses on its employees. We support and encourage individually tailored professional and technical advancement as well as personal growth. We offer an excellent salary and comprehensive benefits package (including eligibility for annual discretionary bonuses), a desirable location, and a professional office environment with the opportunity to work with a collaborative team. Don’t take our word for it. Check out what others are saying: Coffman At A Glance: • 47 years in business., • 850+ employees serving clients throughout the U.S. and overseas from more than 23 locations., • Multi-discipline engineering services plus corrosion control, commissioning and project/construction management., • 70+ employees in 9 offices, providing Fire Protection services since 2014., • #34 Top 80 Engineering Firms, Building Design + Construction, 2022., • #29 Zweig Group Hot Firm List, Zweig Group, 2021., • #161 Top 500 Design Firms, Engineering News-Record, 2023. Applying You must apply online for this position. If you are unable to complete our online application process, or if you need assistance to do so, let us know so we can provide a reasonable accommodation. If you are experiencing problems applying through our system, please try again using a different browser or an updated version of your current browser. If that doesn't work, please contact us directly. This position is direct with Coffman Engineers; we are an Equal Opportunity Employer. We do not discriminate on the basis of any status protected under federal, state, or local law. Follow us! Twitter: @CoffmanEngineer Instagram: @CoffmanEngineers LinkedIn: Facebook: @CoffmanEngineers

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are seeking a Power Electronics Engineer II (2025417) to join our growing spacecraft payload development team. In this position, you will contribute across the entire development lifecycle of next-generation power electronics hardware for satellites and space power systems payloads—from helping define power system architectures and trade studies to detailed circuit design, simulation, printed circuit board (PCB) layout, verification and integration testing, and manufacturing support. JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS • Bachelor of Science (BS) degree or higher in Electrical Engineering from an accredited university, • Minimum of 2 years of experience designing analog and power electronics, • Experience with power stage design of basic DC-DC power converter topologies (e.g. discrete linear regulators, Buck, Boost, Buck-boost), • Knowledge of voltage mode control and peak current mode control theory for DC-DC converters, • Experience with electronics schematic capture and printed circuit board (PCB) layout tools such as Altium, OrCAD, Allegro or Xpedition, • Hands-on experience with testing and troubleshooting electronics and power converters using laboratory instruments such as oscilloscopes, spectrum analyzers, electronic loads, and signal generators, • Experience with analysis and simulation tools such as SPICE, LTSPICE, SIMetrix/SIMPLIS, PLECS, Simulink, MATLAB, MathCAD, ANSYS Q3D and SiWave, or HyperLynx, • Excellent written and verbal communication skills PREFERRED EXPERIENCE, • Master of Science or PhD in Electrical Engineering with research focus in power electronics, • Experience running board-level power integrity simulation using tools such as Ansys SiWave, or HyperLynx, • Experience with power magnetics modeling, design and laboratory characterization, • Experience with control loop modeling and laboratory characterization, • Knowledge of power electronics applications utilizing GaN or SiC wide bandgap power semiconductor devices, • Experience with laboratory characterization of power magnetics

Job Description VP of Marketing Remote (Los Angeles or Washington DC strongly preferred) About the Company A fast-scaling defense technology company that has eliminated traditional tooling — converting digital designs into precision metal parts in days across airframes, missiles, hypersonics, and advanced weapons programs. Backed by some of the most recognized names in aerospace, defense, and technology, already embedded in the most consequential U.S. defense programs running right now and building the infrastructure to scale further. If you want to work on hard problems that matter and see them fly, drive, and defend, this is the place. The Role Post Series C and scaling fast, this company is building the marketing function to match its ambitions. The VP of Marketing will inherit a small existing team and be responsible for evolving it into a high-performance organization — sharpening the brand, expanding defense sector presence, and building credibility with DoW stakeholders, Defense Primes, and government audiences. This is equal parts strategy and execution. The right person can set the vision and roll up their sleeves to get it done without a large support apparatus around them. What You'll Own • Build and scale the company's presence within the defense sector — developing credibility with Defense Primes, program offices, and government stakeholders through bold, targeted campaigns and strategic industry engagement, • Own company-level positioning, messaging architecture, and narrative — and keep it sharp as the company grows, • Scale marketing capabilities across brand, content, PR, events, digital, and field marketing, • Lead, develop, and expand the existing marketing team, • Partner closely with BD, Sales, Product, and Executive Leadership to support long-cycle defense and enterprise sales, • Drive awareness campaigns across strategic global accounts Background and Experience • 10+ years of progressive marketing leadership with VP-level responsibility or ready to step into it, • Proven experience building and executing marketing strategy within the defense sector — specifically with DoW audiences, Defense Primes, or government stakeholders, • Track record of building or scaling marketing organizations at a Series B, C, or high-growth defense tech company, • Experience owning positioning for complex, technical, or mission-critical technologies, • Comfortable operating in a fast-moving environment where strategy and execution are not separate jobs, • Strong instinct for what cuts through in the defense community — not legacy prime marketing, something bolder Preferred Qualifications • Current or recent experience at a high-growth defense tech startup or dual-use technology company, • Background in advanced manufacturing, robotics, AI, or industrial hardware, • Familiarity with automotive OEM or Tier 1 supplier marketing a plus, • Los Angeles or Washington DC based preferred Compensation $200,000 – $250,000 base | Stock Options | Medical, Dental, Vision | PTO Compensation determined based on experience, qualifications, and location.

Job DescriptionTelecom/Network installer Looking for a few dedicated team member who are intermediate/expert installer in California(northern and southern) and a few in East Coast. Familiarity with installing systems like Nortel, Genband, Ribbon, AT&T, and Verizon minimum 3 years experiences of hardware Installation Central office installers, Enterprise and government installers welcome. Please apply only if you are an experienced installer, and know how to do followings Lacing cables Wire-wrapping - you should already know the color codes for telco wires and can wire-wrap. Forming cables in bundles and stitching. DC power cabling - should already know how to properly crimp, heat shrink, terminate lugs on live BDFB. Mounting frames - Drilling, anchoring, leveling, positioning. Your role will also involve working with a range of Data Network and Communications equipment, such as routers, switches, voice gateways, and VOIP equipment. Your expertise will extend to managing Structured Cable Distribution Systems, patch panels, and support structures. minimum requirements • Valid drivers license and safe driving record, • 100% travel required. Must be able to travel outside of the local market and any state across the U.S., possibly for weeks at a time., • Must be able to work any shift, • Ability to distinguish colors in use of color-coded cable, • Ability to lift 50lbs and capable of working aloft, • Ability to successfully complete required safety training, • High School Degree or GED equivalent, • Ability to pass drug screens and background checks, • installation experience in telecommunications or IT field., • Able to follow instructions, • Professionally represent and protect the interest of tanicom in all interactions with customers, vendors, employees

Job DescriptionDescriptionAs a Senior Embedded Software Engineer at Impulse focused on Actuation & Control Systems, you will be responsible for developing embedded software that controls a variety of actuated systems across launch vehicles and spacecraft. These include rocket engine valves, satellite thrusters, thrust vector control actuators, and motor-driven devices such as reaction wheels and gimbals. You will collaborate with propulsion, avionics, and GNC teams to design high-performance, fault-tolerant firmware capable of operating reliably in harsh environments such as launch and space. Responsibilities • Develop real-time firmware for controlling: Rocket engine valves and thrust vector control actuators (TVCAs); Satellite propulsion systems, including cold gas and electric thrusters; and Motor-driven systems such as reaction wheels, gimbals, and momentum wheels, • Implement closed-loop control for: Position, velocity, torque, and pressure regulation; as well as Feedback via encoders, LVDTs, resolvers, current sensors, and pressure sensors, • Interface with motor drivers and redundant actuator systems using protocols like CAN, SPI, UART, Ethernet, RS-422, and BISS-C., • Design and implement safety-critical state machines for thrust sequences, valve actuation, pressurization, and safe shutdowns, • Participate in hotfire campaigns, environmental testing, and in-flight diagnostics, • Write unit-tested and reviewable production firmware for use in both testbeds and spacecraft Minimum Qualifications • Bachelor’s degree in Electrical Engineering, Computer Engineering, Mechanical Engineering, or a related field., • 12+ years of embedded C/C++ development experience for electromechanical control systems, • Experience using oscilloscopes, logic analyzers, hardware debuggers, and source-level debuggers to troubleshoot problems at all layers of the stack., • Experience implementing real-time control loops, motor commutation, and actuator calibration routines, • Proficiency working with servo motors, stepper motors, or brushless DC motors, • Strong understanding of low-level hardware and digital interfaces (I2C, SPI, CAN, UART) Preferred Skills and Experience • Prior work on rocket engine controller software, including valve sequencing and abort logic, • Experience with satellite attitude control systems (ACS), including reaction wheels, magnetorquers, and small thrusters., • Familiarity with redundant actuator architectures and fault detection/response algorithms Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description At WelbeHealth, we serve our communities' most vulnerable seniors through shared intention, pioneering spirit, and the courage to love. These core values and our participant-focus lead the way no matter what. The VP, Federal Government Affairs is accountable for developing and implementing bold federal advocacy strategies by directing contracted lobbyists and other consultants to advance the WelbeHealth PACE mission. The strategies will include cultivating effective relationships with regulators, elected officials, member associations, and other relevant key stakeholders. In addition, this role will proactively influence, initiate, monitor, and track policy changes relevant to WelbeHealth. This role is different because the VP, Federal Government Affairs at WelbeHealth: • Directly shapes the future of the PACE model at the federal level, partnering with CMS and policymakers to influence regulations that determine how care is delivered to our most vulnerable seniors, rather than advocating from the sidelines, • Medical insurance coverage (Medical, Dental, Vision), • Work/life balance - We mean it! 17 days of personal time off (PTO), 12 holidays observed annually, and 6 sick days, • 401K savings + match, • Comprehensive compensation package including base pay and bonus, • Develop and implement an effective federal engagement strategy that results in outstanding relationships with regulators and elected officials, • Direct government affairs advocacy efforts to facilitate timely approvals of PACE applications, resolve regulatory issues for operating PACE programs, and influence policy changes that support the WelbeHealth mission, • Establish a proactive strategy to maintain a high level of situational awareness on policy matters, identifying risks and opportunities for WelbeHealth, • Maintain positive relationships with key external stakeholders including trade associations, other healthcare entities, PACE organizations, workgroups, advocacy groups, relevant consumer groups, etc., • Identify, manage, and effectively leverage WelbeHealth lobbyists, consultants, or other resources to achieve WelbeHealth's advocacy goals, • Effectively track, synthesize, and communicate relevant government policy changes (laws, regulations, guidance) impacting WelbeHealth, • Master's degree in public policy or relevant field; professional experience may be substituted, • Minimum of seven (7) years of relevant experience engaging with federal regulators or elected officials required, • Minimum of seven (7) years of experience as a leader in healthcare, eldercare, or human services policy required, • Direct experience with Center for Medicare and Medicaid Services required; recent CMS experience highly preferred, • Located in Washington, DC highly preferred; alternatively, ability to travel to Washington D.C. on frequent, as-needed basis is required, • Ability to travel to WelbeHealth markets and other travel as needed, • Persuasion and rhetorical skills needed to successfully influence elected officials and regulators Salary/Wage base range for this role is $224,800 - $309,100 / year + Bonus. WelbeHealth offers competitive total rewards package that includes, 401k match, healthcare coverage and a broad range of other benefits. Actual pay will be adjusted based on experience and other qualifications. Compensation$224,800—$309,100 USD COVID-19 Vaccination Policy At WelbeHealth, our mission is to unlock the full potential of our vulnerable seniors. In this spirit, please note that we have a vaccination policy for all our employees and proof of vaccination, or a vaccine declination form will be required prior to employment. WelbeHealth maintains required infection control and PPE standards and has requirements relevant to all team members regarding vaccinations. Our Commitment to Diversity, Equity and Inclusion At WelbeHealth, we embrace and cherish the diversity of our team members, and we're committed to building a culture of inclusion and belonging. We're proud to be an equal opportunity employer. People seeking employment at WelbeHealth are considered without regard to race, color, religion, sex, gender, gender identity, gender expression, sexual orientation, marital or veteran status, age, national origin, ancestry, citizenship, physical or mental disability, medical condition, genetic information or characteristics (or those of a family member), pregnancy or other status protected by applicable law. Beware of Scams Please ensure your application is being submitted through a WelbeHealth sponsored site only. Our emails will come from @welbehealth.com email addresses. You will never be asked to purchase your own employment equipment. You can report suspected scam activity to

Job DescriptionDescriptionAs a Senior Embedded Software Engineer at Impulse focused on Actuation & Control Systems, you will be responsible for developing embedded software that controls a variety of actuated systems across launch vehicles and spacecraft. These include rocket engine valves, satellite thrusters, thrust vector control actuators, and motor-driven devices such as reaction wheels and gimbals. You will collaborate with propulsion, avionics, and GNC teams to design high-performance, fault-tolerant firmware capable of operating reliably in harsh environments such as launch and space. Responsibilities • Develop real-time firmware for controlling: Rocket engine valves and thrust vector control actuators (TVCAs); Satellite propulsion systems, including cold gas and electric thrusters; and Motor-driven systems such as reaction wheels, gimbals, and momentum wheels, • Implement closed-loop control for: Position, velocity, torque, and pressure regulation; as well as Feedback via encoders, LVDTs, resolvers, current sensors, and pressure sensors, • Interface with motor drivers and redundant actuator systems using protocols like CAN, SPI, UART, Ethernet, RS-422, and BISS-C., • Design and implement safety-critical state machines for thrust sequences, valve actuation, pressurization, and safe shutdowns, • Participate in hotfire campaigns, environmental testing, and in-flight diagnostics, • Write unit-tested and reviewable production firmware for use in both testbeds and spacecraft Minimum Qualifications • Bachelor’s degree in Electrical Engineering, Computer Engineering, Mechanical Engineering, or a related field., • 5+ years of embedded C/C++ development experience for electromechanical control systems, • Experience using oscilloscopes, logic analyzers, hardware debuggers, and source-level debuggers to troubleshoot problems at all layers of the stack., • Experience implementing real-time control loops, motor commutation, and actuator calibration routines, • Proficiency working with servo motors, stepper motors, or brushless DC motors, • Strong understanding of low-level hardware and digital interfaces (I2C, SPI, CAN, UART) Preferred Skills and Experience • Prior work on rocket engine controller software, including valve sequencing and abort logic, • Experience with satellite attitude control systems (ACS), including reaction wheels, magnetorquers, and small thrusters., • Familiarity with redundant actuator architectures and fault detection/response algorithms Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Broadata Communications, Inc. (BCI) is a privately held California-based corporation. BCI is a leading and innovative company specializing in the development of market-driven products for the transmission of digital multimedia (video, audio, and data) over fiber. Our clients are world leaders in their industries, spanning entertainment, broadcast, medical, professional audio/video, house of worship, education, government, military, and transportation sectors. We are ISO 13485 and ISO 9001 certified, with a strong commitment to quality, innovation, and continuous improvement. We are seeking a detail-oriented Senior Project Engineer to lead the design and development of advanced medical devices. The role involves driving electronics and embedded systems from concept to production while ensuring technical excellence, regulatory compliance ISO 13485, and successful product launches. The candidate must be able to communicate effectively with contract manufacturers (CMs) to support design transfer, production builds, and troubleshooting. This critical, hands-on role in Product Development and Engineering is based in Torrance, CA, and is not a remote or hybrid position. We offer a fast-paced, high impact and stimulating work environment with opportunities for professional growth within BCI. Veterans welcome! BASIC JOB RESPONSIBILITIES: • Lead electronics and embedded system development across the full product lifecycle — from concept, architecture, and design through to testing, validation, and manufacturing transfer., • Collaborating with Production, Marketing, and Sales for product requirements, releases, supports, and testing., • Conduct design review including schematics and PCB layouts and FW for embedded systems, video/audio signal chains, and power subsystems., • Work closely with contract manufacturers (CMs) daily to ensure product designs are implemented correctly and manufacturing aligns with specifications., • Validate conceptual problem solutions by performing trade studies and analyses., • Be a key contributor to the preparation of successful proposal designs, cost estimates, and technical volume write ups., • Support and drive root cause analysis and resolution for design, validation, and field issues., • Create and maintain documentation required for design history files (DHF).Job responsibilities within our organization are dynamic. This may not be a complete list of duties. Other responsibilities and duties may be assigned by your supervisor or upper management. EDUCATION, EXPERIENCE, & KNOWLEDGE: • Bachelor of Science in Electrical Engineering, or related field., • 7+ years of experience in electronic hardware and embedded systems design., • Knowledgeable in high-speed video/audio/data transmission, switching, and/or processing for products such as video analyzers, video scalers, video matrix switchers, video wall, etc. are highly desired., • Hands-on experience with schematics (Altium Designer or equivalent), and PCB layout., • Experience with CPLD, FPGA, and Microprocessor programming and coding, • Solid understanding of signal integrity, analog/digital design, and debugging using lab instruments (oscilloscope, spectrum analyzer, etc.)., • Prior experience in ISO 13485 environment. Demonstrable past capabilities in solving complex video design problems.PREFERRED EDUCATION, EXPERIENCE, & KNOWLEDGE, • Master’s in Electrical Engineering, Computer Engineering, or related field, preferred, • Prior experience in FDA-regulated product development., • Experience with medical-grade video and audio signal processing (e.g., HDMI, SDI, audio ADC/DAC, compression)., • Understanding of power system design, including DC-DC converters, LDOs, and isolated supplies for medical equipment., • Familiarity with real-time operating systems (RTOS) and/or low-latency firmware development., • Knowledge of Network configuration and setup., • Knowledge of Design for Manufacturing (DFM) and Design for Test (DFT) principles.SKILLS, ABILITIES, & ATTRIBUTES:, • Strong attention to detail, problem solving, organizational, time and risk management skills, and analytical abilities., • Proactive, detail-oriented, and capable of managing multiple priorities., • Comfortable working in a fast-paced, cross-functional team environment and work extended hours (as needed)., • Strong self-motivation and attitude for personal career growth, willingness to self-learn, and work in new technology domains, • Advanced proficiency in Microsoft Excel and working knowledge of Microsoft Office Suite.BENEFITS:, • Medical, vision and dental insurance, • 401(k) with company match (100% of the first 4% in eligible compensation), • Flexible Spending Account, • 2 weeks paid vacation, • 1 Week sick pay, • 10 company holidays, • Group Life InsurancePAY RANGE:, • 140,000 - $170,000 annual base salaryPay may vary depending on experience, qualifications, and other job-related factors. Powered by JazzHR kspJViDTqo

Project Manager II - Los Angeles, CA Project Manager II - Los Angeles, CA Full-Time | On-Site | Los Angeles, CA Why CMTS? Every day at CMTS, our team delivers infrastructure projects that positively impact lives and communities.With over 42 years of industry experience, CMTS has built a strong found

About the Luskin Center for Innovation (LCI): Our mission is to advance effective and equitable solutions to pressing environmental challenges through actionable research that engages UCLA scholars, policymakers, and communities.We often focus on California, one of the world’s largest economies, t

Work closely with CDC to support BOH operations and monitor labor costs.

University of California Los Angeles.Undergraduate Education Initiatives (UEI) collaborates with faculty and departments across campus to develop innovative, interdisciplinary educational programs for UCLA's 30,000 undergraduates and is supported by general funds as well as extramural funding source

We're currently looking for individuals across the country to take part in remote paid research, including remote focus groups, product trials, and consumer studies.Earn up to $750 a week in your free time by providing feedback on everyday products and services.If you're comfortable sharing your opi

Job position: Administrative Assistant.Shift: 5Days-8hours (8:00am-4:30pm).Highly preferred: Hospital administrative experience.Admin support for Period services including but not limited to reports, materials info research and presentation.Department Details: Surgery Central Scheduling and OR Billi

Loupiotte Kitchen is a cozy and charming French café in the heart of Los Feliz.Open seven days a week from 9:00am–2:30pm, we are a neighborhood restaurant built on warmth, consistency, and care — for our food, our guests, and our team.We are seeking a hands-on General Manager who

Work closely with CDC to support BOH operations and monitor labor costs.

Work closely with CDC to support BOH operations and monitor labor costs.

For 25 years, Clementine has built a business that is both demanding and humane —.We operate across retail and catering, with meaningful day-to-day variability.We are looking for a General Manager who wants to own that structure — and.The General Manager owns day-to-day operations across

Structural Engineering Project Manager / Great Place To Work! This Jobot Job is hosted by: Alex Console Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.Salary: $125,000 - $150,000 per year A bit about us: We are committed to providing a positive and suppor

Remote Sr Project Manager, Mergers and Acquisitions- 6+ Month Contract in Los Angeles, CA.This Jobot Consulting Job is hosted by: Robert Reyes Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.Salary: $60 - $70 per hour A bit about us: Prestige Hospital Syst

Every day, our team members do amazing things in pursuit of our shared purpose to build trust with our clients, partners, subcontractors, and teammates.No matter your background, education, or career path, if you share our vision to create extraordinary experiences, you belong at HITT.Commercial Con

MEP Project Manager - Hybrid This Jobot Job is hosted by: Tony Barhoum Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.Salary: $125,000 - $150,000 per year A bit about us: We are a Top Ranked, Award Winning, AEC Firm specializing in Engineering, Architectu

Position Title: Site Assessment Project Manager (School Facility Projects) – Owners Team Client / Program: Los Angeles Unified School District – Office of Environmental Health & Safety Position Location: LAUSD Headquarters Building in DTLA Position Start Date: Approximately May to June Salary $1

Hybrid Opportunity with Award Winning, Employee Owned Construction/Engineering Management Firm - MAJOR Career Growth Potential! This Jobot Job is hosted by: Kristin Ursua Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.Salary: $130,000 - $170,000 per year

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Administrative Assistant admin experience not required.Remote Work From Home Administrative Assistant Admin - Part Time Market Research Panelists

Administrative Assistant with Social Media experience, Transportation Industry, Downtown LA This Jobot Consulting Job is hosted by: David Hyon Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.Salary: $25 - $30 per hour A bit about us: We are a thriving smal