Design verification engineer jobs in Austin, TexasCreate job alerts

Job Title: Network Architect/Principal Network Engineer Location : Austin, TX Duration : 6 months Software-Defined Access (SD-Access) Fabric Migration Planning & Deployment Position Summary We are seeking a Senior Network Engineer to lead the planning, design refinement, configuration development, and deployment readiness activities for large-scale spine/leaf campus deployments. This is a strategic, onsite (Austin, TX headquarters) networking lead role responsible for developing standardized configurations, validating designs, building detailed runbooks, and ensuring field deployment teams are fully prepared for successful site migrations. The ideal candidate combines deep technical expertise with strong documentation discipline, a consultative mindset, and cross-functional coordination skills. Primary Responsibilities Deployment Planning & Strategy • Lead end-to-end deployment planning for SD-Access Fabric replacement network., • Translate High-Level Designs (HLDs) into detailed, deployment-ready Low-Level Designs (LLDs)., • Develop and execute phased IPv4-to-IPv6 migration strategies (dual-stack, phased transition, or full native IPv6)., • Develop scalable, repeatable site deployment models., • Identify technical risks and define mitigation strategies prior to cutovers., • Refine standardized configuration templates for:, • SD-Access Fabric, • Underlay and overlay routing, • Segmentation (VRFs, VLANs, policies), • QoS and application-aware routing, • Validate route redistribution and failover behaviours., • Author detailed Method of Procedure (MOP) documents for:, • SD-Access Fabric planning and migration, • IPv4 and IPv6 addressing changes, • Develop step-by-step deployment runbooks for field engineers., • Create standardized rollback procedures., • Define pre-cutover validation and post-cutover verification checklists., • Provide real-time remote support during site cutovers for initial pilots., • Review field deployment feedback and refine processes accordingly., • Validate as-built configurations against design intent., • Review and approve change requests for network deployments., • Ensure compliance with enterprise architecture and security standards., • Maintain master design documentation and configuration baselines., • 8+ years of enterprise networking experience., • 5+ years of SD-Access Fabric architecture experience., • Proven experience building deployment documentation and standardized configuration templates., • Demonstrated experience leading IPv6 migration initiatives in production environments., • Strong expertise in:, • BGP (policy design, route control, redistribution), • OSPF and multi-area design, • Underlay/overlay architecture, • EVPN-VXLAN or software-defined campus solutions, • WAN resiliency and failover strategies, • Experience supporting large-scale multi-site rollouts (50+ sites)., • Network automation experience (Python, Ansible, Terraform)., • Experience with routing, switching, wireless, and firewalls., • Experience in regulated or uptime-sensitive environments (industrial, manufacturing, utilities)., • Experience with Cisco, Arista, Palo Alto Networks, and Open Gear solutions., • Strong technical writing and documentation skills., • Systems-level thinking and architectural awareness., • Ability to anticipate deployment risks before execution., • Strong collaboration skills with PMs, field engineers, and vendors., • Analytical mindset with structured problem-solving approach., • Comfortable providing leadership without direct authority.

We have been retained by a handful of companies working on cutting-edge solutions across AI, IoT, and HPC. They are looking for a world-class Senior Design Verification Engineers with: • 10+ years of experience, • Strong experience in VLSI verification, • Proficiency in UVM and SystemVerilog, • Hands-on experience across at least two full block or system verification cycles Nice to have: • Experience working within a startup environment, • Strong individual contributors who can collaborate with cross-functional teams, • Experience with chip tape-out Benefits: • H-1B transfer, • Compelling equity options, • Full design ownership Please note: this role requires over 10 years of industry experience and is not suitable for entry-level candidates. These roles are all based in Austin, full-time, and with well-backed startups. Get in touch! Senior Verification Engineers

Job Title: Network Architect Software-Defined Access (SD-Access) Fabric Migration Planning & Deployment Position Summary We are seeking a Senior Network Engineer to lead the planning, design refinement, configuration development, and deployment readiness activities for large-scale spine/leaf campus deployments. This is a strategic, onsite (Austin, TX headquarters) networking lead role responsible for developing standardized configurations, validating designs, building detailed runbooks, and ensuring field deployment teams are fully prepared for successful site migrations. The ideal candidate combines deep technical expertise with strong documentation discipline, a consultative mindset, and cross-functional coordination skills. Primary Responsibilities Deployment Planning & Strategy • Lead end-to-end deployment planning for SD-Access Fabric replacement network., • Translate High-Level Designs (HLDs) into detailed, deployment-ready Low-Level Designs (LLDs)., • Develop and execute phased IPv4-to-IPv6 migration strategies (dual-stack, phased transition, or full native IPv6)., • Develop scalable, repeatable site deployment models., • Identify technical risks and define mitigation strategies prior to cutovers., • Refine standardized configuration templates for:, • SD-Access Fabric, • Underlay and overlay routing, • Segmentation (VRFs, VLANs, policies), • QoS and application-aware routing, • Validate route redistribution and failover behaviours., • Author detailed Method of Procedure (MOP) documents for:, • SD-Access Fabric planning and migration, • IPv4 and IPv6 addressing changes, • Develop step-by-step deployment runbooks for field engineers., • Create standardized rollback procedures., • Define pre-cutover validation and post-cutover verification checklists., • Provide real-time remote support during site cutovers for initial pilots., • Review field deployment feedback and refine processes accordingly., • Validate as-built configurations against design intent., • Review and approve change requests for network deployments., • Ensure compliance with enterprise architecture and security standards., • Maintain master design documentation and configuration baselines., • 8+ years of enterprise networking experience., • 5+ years of SD-Access Fabric architecture experience., • Proven experience building deployment documentation and standardized configuration templates., • Demonstrated experience leading IPv6 migration initiatives in production environments., • Strong expertise in:, • BGP (policy design, route control, redistribution), • OSPF and multi-area design, • Underlay/overlay architecture, • EVPN-VXLAN or software-defined campus solutions, • WAN resiliency and failover strategies, • Experience supporting large-scale multi-site rollouts (50+ sites)., • Network automation experience (Python, Ansible, Terraform)., • Experience with routing, switching, wireless, and firewalls., • Experience in regulated or uptime-sensitive environments (industrial, manufacturing, utilities)., • Experience with Cisco, Arista, Palo Alto Networks, and Open Gear solutions., • Strong technical writing and documentation skills., • Systems-level thinking and architectural awareness., • Ability to anticipate deployment risks before execution., • Strong collaboration skills with PMs, field engineers, and vendors., • Analytical mindset with structured problem-solving approach., • Primarily onsite at customer campus located in Austin, TX., • Occasional participation in after-hours migration bridge calls as escalation lead., • Limited travel; focused on planning, validation, and oversight rather than physical deployment.

We have been retained by a handful of companies working on cutting-edge solutions across AI, IoT, and HPC. They are looking for top-tier Mixed Signal Verification Engineer Engineers with: • 5+ years of experience, • Strong experience in behavioural modelling (BM), • Proficient in mixed-signal dynamic verification using digital design flows (non-AMS), • Strong Verilog/SystemVerilog skills for modelling and verification, • Experience with Cadence Virtuoso for schematic design and analysis Nice to have: • Experience working within a startup environment, • Strong individual contributor who can collaborate with cross-functional teams, • Experience with chip tape-out Benefits: • H-1B transfer, • Compelling equity options, • Full design ownership Please note: this role requires over 5 years of commercial experience and is not suitable for entry-level candidates. These roles are all based in Austin, full-time, and with well-backed startups. Get in touch! Senior Mixed Signal Engineers

Senior Product Validation Engineer 📍 Austin, TX (On-site) I’m working with a well-funded robotics company building next-generation robotic systems designed to operate alongside humans in real-world environments. Their platform is already gaining serious traction across industrial and logistics use cases, with a clear roadmap toward broader commercial deployment. They’re now looking for a Senior Product Validation Engineer to take ownership of validation strategy across a highly complex electro-mechanical robotics platform. The Role This is a high-impact position where you’ll own and drive the product validation roadmap for a cutting-edge robotics system. You’ll be responsible for ensuring performance, reliability, and safety as the product moves from development into scaled deployment. This isn’t just test execution. You’ll be shaping how validation is done across the company. What You’ll Be Doing • Lead the development of verification & validation (V&V) strategies, test plans, and traceability to system requirements, • Own validation of robot performance, reliability, and safety across development cycles, • Partner closely with systems, hardware, and design engineering teams to identify issues and drive corrective actions, • Build and scale test automation frameworks to improve efficiency and reduce cycle time, • Design and implement custom test rigs, fixtures, and methodologies, • Analyze and communicate complex test data to drive engineering decisions, • Work with external labs and certification bodies on compliance, safety, and regulatory validation, • Drive best practices across reliability engineering and root cause analysis What They’re Looking For • Strong experience leading verification & validation for electro-mechanical systems (robotics, automotive, aerospace, or similar), • Hands-on background in mechatronics, electronics, or hardware testing, • Proven track record in design verification, reliability testing, and failure analysis, • Experience with environmental and stress testing tools (thermal chambers, HALT/HASS, shaker tables, etc.), • Ability to operate in a fast-paced environment with high ownership and ambiguity, • Strong communication skills, able to translate technical findings into actionable insights Background • Bachelor’s degree in Engineering (Master’s preferred), • ~7+ years experience in relevant engineering / validation roles Why This Role • Work on one of the most advanced robotics platforms in the market, • High ownership and visibility in a company scaling toward production, • Real-world impact across industries like manufacturing, logistics, and beyond, • Competitive compensation, equity, and strong long-term upside Additional Notes • Must be eligible to work in the U.S. due to export control regulations, • On-site in Austin

We Are: At Synopsys, we drive the innovations that shape the way we live and connect. Our technology is central to the Era of Pervasive Intelligence, from self-driving cars to learning machines. We lead in chip design, verification, and IP integration, empowering the creation of high-performance silicon chips and software content. Join us to transform the future through continuous technological innovation. You Are: You are a dynamic, resourceful engineer with a passion for solving complex challenges in communications technology. Your expertise spans digital and analog communications, and you thrive in fast-paced environments where innovation is encouraged. You're comfortable engaging with customers, translating technical requirements into actionable solutions, and collaborating with cross-functional teams. You understand the nuances of semiconductor design and communications protocols, and you're always eager to stay ahead of industry trends. You believe in continuous learning and actively pursue opportunities to expand your technical skillset. You value diversity and inclusion, recognizing that innovative ideas come from a variety of perspectives. Your approach is both analytical and creative, allowing you to devise solutions that are not only technically sound but also user-friendly and scalable. You are motivated by making a tangible impact-whether it's improving product performance, supporting customer success, or mentoring junior engineers. You communicate effectively, can explain complex concepts to both technical and non-technical audiences, and are a collaborative team player. You take pride in delivering high-quality outcomes and are comfortable managing multiple priorities while maintaining attention to detail. Your commitment to excellence drives you to exceed expectations and help shape the future of communications technology. What You'll Be Doing: • Leads the coordination and execution of all technical activities throughout the lifecycle of a sales opportunity, e.g. technical discovery, negotiation of technical success criteria, product presentations, demonstrations, and evaluations. Works independently, results-oriented, across teams and organizations., • As a credible hands-on expert in the customer's application, you will work with customers to better understand their product development requirements and what they need to improve their performance metrics. You will address application-specific design and simulation requirements by utilizing the relevant product technologies and platforms that best meet the customer's needs. You will internalize the value proposition and convince the customer of the compelling reasons to use Synopsys tools., • Support the development of differentiating simulation solutions using the Synopsys platform and our products; implement our Synopsys solutions into your customers' design workflows. Expand your expertise and become a recognized expert in your field of application., • Collaborate with Product Development to translate customer requirements into new product features; participate in the testing of new Ansys product releases, develop application best practices., • Support the Field and Digital Marketing team by developing promotional materials and supporting events, author conference presentations., • Contribute to and lead professional service deliveries and conduct training classes. The Impact You Will Have: • Accelerate customer adoption of Synopsys communications solutions across diverse industries., • Enhance product performance and reliability through diligent technical support and feedback., • Bridge the gap between customers and internal teams for seamless product improvements., • Empower customers to achieve breakthrough innovations in communications and semiconductor design., • Foster a culture of collaboration and knowledge sharing within the Applications Engineering team., • Contribute to Synopsys' leadership in communications technology by enabling successful implementations and use cases., • Shape industry standards and best practices by representing Synopsys in external engagements., • Drive continuous improvement in customer satisfaction and product adoption rates. What You'll Need: • Required education and degree type: BS or MS or PhD in Mechanical, Aerospace, Materials Science Engineering or related field, • Required minimum years of professional experience in an engineering software environment: BS+5, MS+3, or PhD+0, • Strong fundamentals in continuum mechanics, nonlinear solid and structural mechanics, structural dynamics, numerical analysis for solids and structures, • Subject matter expert in computational solid and structural mechanics and is/will be sought out for advice by other Synopsys engineers, • Demonstrated use of relevant Synopsys software (e.g. Ansys Mechanical, LS-Dyna) or knowledge of other commercial or open source FEA software (e.g. Abaqus, NASTRAN, Marc, Moose etc), • Experience in automating engineering workflows and/or developing custom solver subroutines in Python/FORTRAN/C/C++, • Logical problem-solving, strong interpersonal and communication skills, fluent in writing and speaking English, • Strong organizational and time management skills, possesses a sense of urgency, • Working across different teams and stakeholders to progress projects effectively, • Projects a professional image and demonstrates business acumen, driven to succeed, • Ability to travel domestically up to 25% of time, • Preferred requirements:, • Demonstrated ability to study complex failure modes within electronics/semiconductor packaging using FEA or related numerical methods, • 2+ years experience in electronics/semiconductor applications focused on mechanical reliability at die/package level or in semiconductor manufacturing processes, • Understanding and/or demonstrated application of ML algorithms applied to solid and structural mechanics applications, • Demonstrated application of automation, statistical/ML based model order reduction methodologies to accelerate engineering predictions for product design, • Understanding of atomistic modeling methods applied to engineering applications, • Demonstrated history of presenting in highly regarded conferences and publishing in top-tier journals/conference proceedings Who You Are: • Excellent communicator-able to convey technical information clearly and concisely., • Collaborative team player who thrives in diverse, inclusive environments., • Analytical thinker with strong problem-solving skills., • Adaptable and able to manage multiple priorities in dynamic settings., • Customer-focused, with a commitment to delivering outstanding service and solutions., • Proactive learner, open to new technologies and approaches., • Empathetic and supportive, ready to mentor and guide others. The Team You'll Be A Part Of: You'll join a highly skilled Applications Engineering team specializing in communications technology. The team is dedicated to supporting customers, advancing product innovation, and driving technical excellence across Synopsys' communications portfolio. Collaboration is at the heart of our work, and we foster an environment where ideas are shared freely and every team member's contributions are valued. Together, we tackle complex challenges and enable customers to achieve their goals. Rewards and Benefits: We offer a comprehensive range of health, wellness, and financial benefits to cater to your needs. Our total rewards include both monetary and non-monetary offerings. Your recruiter will provide more details about the salary range and benefits during the hiring process. At Synopsys, we want talented people of every background to feel valued and supported to do their best work. Synopsys considers all applicants for employment without regard to race, color, religion, national origin, gender, sexual orientation, age, military veteran status, or disability. In addition to the base salary, this role may be eligible for an annual bonus, equity, and other discretionary bonuses. Synopsys offers comprehensive health, wellness, and financial benefits as part of a competitive total rewards package. The actual compensation offered will be based on a number of job-related factors, including location, skills, experience, and education. Your recruiter can share more specific details on the total rewards package upon request. The base salary range for this role is across the U.S. ___ Save

US base salary range: $76,000 - $95,000 DOE Bonterra exists to propel every doer of good to their peak impact. We measure that impact against our vision to increase the giving rate as a percentage of GDP from 2% to 3% by 2033. We know that this goal is lofty, but we are confident that the right technology and expertise will strengthen trust in the sector, allowing the social good industry to accelerate growth and reach peak impact. Bonterra's differentiated, end-to-end solutions collectively support a unique network of over 20,000 customers, including over 16,000 nonprofit organizations and over 50 percent of Fortune 100 companies. Learn more at bonterratech.com. As an Application Security Engineer at Bonterra, you will help support the security of our web applications and APIs by working closely with engineering, DevOps, and security teams. In this role, you'll focus on identifying and helping remediate application security risks, supporting secure development practices, and contributing to application security tooling and processes that enable teams to ship software safely and efficiently. This role is well suited for an application security engineer with a few years of hands-on experience who is comfortable executing security testing activities, analyzing findings, and collaborating with development teams, while continuing to grow depth in areas such as cloud security, automation, and secure design. This role is scoped as a mid-level Application Security Engineer position with opportunities to grow into senior application or product security roles over time. What You'll Do • Work with engineering teams to help integrate application security best practices into the software development lifecycle (SDLC), including secure coding guidance., • Support secure CI/CD pipelines by collaborating with DevOps and cloud teams on existing security controls and workflows., • Identify, assess, and help prioritize vulnerabilities in web and API-based applications, providing guidance to engineering teams on remediation., • Perform manual web application penetration tests using established methodologies and tools., • Assist with proof-of-concept demonstrations for select security findings to help teams understand impact and remediation., • Perform application code reviews as needed., • Review and triage SAST, SCA and DAST scan results., • Track and manage application security findings, supporting remediation efforts and verification of fixes., • Support incident response efforts related to application security issues., • Provide guidance to engineering teams on common web application vulnerabilities such as OWASP Top 10., • Develop and implement scripts and workflows to streamline operations and reduce manual effort., • Automating security processes and developing methods for analyzing and responding to security findings., • Assist with documenting secure coding standards and common remediation patterns., • Stay current on emerging threats, vulnerabilities, and application security trends. Requirements • 3+ years of experience in application security, product security, or secure software development., • Experience with manual web application penetration testing., • Experience securing modern web applications and APIs., • Strong understanding of web application vulnerabilities, their root causes, and common remediation approaches., • Ability to review application source code as needed to support vulnerability triage and testing activities., • Proficiency in at least one programming language (e.g., Java, Python, JavaScript/TypeScript, C#, or Go)., • Experience working with CI/CD pipelines and modern development workflows., • Familiarity with security testing tools such as SAST, DAST, and SCA., • Strong communication skills and ability to work collaboratively with engineering teams. What sets you apart • Exposure to threat modeling concepts and secure design practices., • Previous software development or application design experience., • Familiarity with cloud environments and basic AWS security concepts., • Basic knowledge of identity and access management concepts (OAuth, OIDC, JWT), • Exposure to PCI DSS or regulated environments. At Bonterra, we're building AI-powered tools to solve real human challenges-and we want teammates who share that enthusiasm.We value people who will champion AI and bring diverse perspectives from different industries, backgrounds, and cultures. Together, we create AI that breaks down barriers, empowers communities, and delivers better outcomes. At this time, we are unable to consider candidates who require current or future sponsorship for employment authorization. At Bonterra, we're innovating with a higher purpose: to increase giving to 3% of US GDP by 2033, creating $573 billion more in global impact every year. At Bonterra, we foster an inclusive, equitable culture where every team member belongs and contributes to meaningful impact. Read more about our values and culture ___ We offer a comprehensive benefits package that supports your health, well-being and growth - explore full details ___ Compensation and benefits for this role apply to full-time employees in the United States and may vary based on local standards, laws and norms. Pay is determined by location, skills, experience, and education, and is one part of Bonterra's total rewards package, which may also include bonuses, incentives, equity, and a comprehensive benefits program. At Bonterra, we are proud to be an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We provide equal employment opportunities without regard to race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, disability, veteran status, or any other characteristic protected by law. If you require a reasonable accommodation during the application process, please ___

Job Posting Title: Facilities Mechanical Engineer I or II, Texas Institute for Electronics Hiring Department: Texas Institute for Electronics Position Open To: All Applicants Weekly Scheduled Hours: 40 FLSA Status: To Be Determined at Offer Earliest Start Date: Ongoing Position Duration: Expected to Continue Location: AUSTIN, TX Job Details: About Us The___is a University of Texas at Austin-supported semiconductor consortium of state and local government, preeminent defense electronics and semiconductor companies, national labs and nationally recognized academic institutions. Our mission is to develop and execute a state-of-the-art 3D Heterogenous Integration manufacturing technology roadmap, and to provide critical pilot manufacturing capabilities to address national security needs and catalyze domestic economic growth. Join the Texas Institute for Electronics (TIE) and help us push the boundaries in critical semiconductor domains, including advanced packaging, with the aim of reestablishing U.S. prominence in semiconductor manufacturing. With over $1 billion in funding from the US DoD and the state of Texas, we're at the forefront of creating cutting-edge semiconductor manufacturing equipment and processes that will set the course for future advancements in semiconductor logic, memory, heterogeneous integration, chip cooling and more. Situated in the heart of Austin - named "America's Coolest City" by Expedia and "The Best Place to Live in the U.S." by U.S. News and World Report - the Texas Institute for Electronics embodies the city's innovative spirit. Benefits UT Austin, recognized by Forbes as one of ___, provides outstanding ___ and ___ packages that include: • Competitive health benefits (employee premiums covered at 100%, family premiums at 50%), • Voluntary Vision, Dental, Life, and Disability insurance options, • Generous paid vacation, sick time, and holidays, • Teachers Retirement System of Texas, a defined benefit retirement plan, with 8.25% employer matching funds, • Additional Voluntary Retirement Programs: Tax Sheltered Annuity 403(b) and a Deferred Compensation program 457(b), • Flexible spending account options for medical and childcare expenses, • Robust free training access through LinkedIn Learning plus professional conference opportunities, • Tuition assistance, • Expansive employee discount program including athletic tickets, • Free access to UT Austin's libraries and museums with staff ID card, • Free rides on all UT Shuttle and Austin CapMetro buses with staff ID card, • For more details, please see ___ and ___ and ___ What Starts Here Changes the World Texas Institute of Electronics (TIE) is looking for a Facilities Mechanical Engineer I or II to join our team. As a member of the TIE Facilities team, you'll be directly responsible for overseeing the safe design and operation of various mechanical systems for our semiconductor wafer fab and test facilities. TIE Facilities operates over 150 different utility systems that include chemicals, gases, variety of electrical systems, water systems, HVAC, waste, vacuum, and controls. Facilities works closely with TIE's manufacturing team to understand how the utility systems impact the process as well as how to reduce consumption. The successful candidate will be proficient in building mechanical systems design, operations and equipment to include chillers and boilers, cooling towers, pumps, heat exchangers, filtration systems, piping, HVAC and duct systems. The candidate will be able to execute projects in these areas and provide design, construction, and commissioning support as well as troubleshooting as needed for ongoing operations. It is expected that they have an understanding of requirements and limitations in the following key expertise areas. The Facilities Mechanical Engineer I or II is needed to oversee the safe design and operation of various mechanical systems for our semiconductor wafer fab and test facilities. • Building cooling and heating equipment design and operation including chillers, boilers, pumps, cooling towers and heat exchangers., • Design and operation of fluid distribution and HVAC systems including exhaust systems, HVAC equipment and humidification systems., • Troubleshoot system deficiencies, develop and implement robust maintenance strategies and identify opportunities to improve reliability and reduce cost., • Oversight of the building mechanical systems with a focus on safety, operational reliability, cost effective operations and a proactive maintenance program while ensuring compliance with local building codes and adherence to industry guidelines., • Other related functions as assigned., • Bachelor's degree in Mechanical Engineering or a related field, • At least two years' experience in building mechanical systems engineering, design and construction, • Master's degree in Mechanical Engineering or a related field, • More than two years' experience in building mechanical systems engineering, design and construction, • Familiarity with ASHRAE Fundamentals, cooling, heating and steam system design and operation, pump and piping system design and HVAC system equipment design and operation, • Experience in troubleshooting system deficiencies, developing and implementing robust maintenance strategies and identifying opportunities to improve reliability and reduce cost. Relevant education and experience may be substituted as appropriate. • Strong verbal and written communication skills, • Demonstrated strong analytical and problem-solving skills, • Ability to work in teams and collaborate effectively with people in different functions, • Ability to take the initiative and drive for results, • Strong time management skills that enable on-time project delivery, • Ability to work effectively in an interrupt-driven, fast-paced and rapidly changing environment, • Demonstrated ability to build strong, influential relationships, • Possess strong critical thinking and problem-solving skills, • Demonstrated strong customer service orientation and ability to take ownership for issue resolution, • Proficient with PC hardware, windows-based applications and AutoCAD Revit, • Ability to understand, review and provide input on construction drawings, • Ability to analyze existing systems and associated monitoring equipment to troubleshoot and resolve problems, • Ability to develop and update Process and Instrumentation Diagrams, Sequence of Operations, I/O lists, panel drawings and instrumentations lists, • Facilities Mechanical Engineer I: $120,000+ depending on qualifications, • Facilities Mechanical Engineer II:$140,000+ depending on qualifications, • Personal protection equipment (furnished), • On occasion, may work in all weather conditions, • May work around chemical fumes, • May work around standard office conditions, • May work around chemicals, • May work around electrical and mechanical hazards, • Repetitive use of a keyboard at a workstation, • Use of manual dexterity (ex: using a mouse), • Climbing of stairs, • Monday - Friday, typical office hours plus occasional after-hours work., • This is a 24x7 facility; there may be occasional nights/weekends to maintain production availability., • Resume/CV, • 3 work references with their contact information; at least one reference should be from a supervisor, • Letter of interest Importantfor applicants who are NOT current university employees or contingent workers:You will be prompted to submit your resume the first time you apply, then you will be provided an option to upload a new Resume for subsequent applications. Any additional Required Materials (letter of interest, references, etc.) will be uploaded in the Application Questions section; you will be able to multi-select additional files. Before submitting your online job application, ensure thatALLRequired Materials have been uploaded. Once your job application has been submitted, you cannot make changes. Important for Current university employees and contingent workers:As a current university employee or contingent worker, you MUST apply within Workday by searching for Find UT Jobs. If you are a current University employee, log-in to Workday, navigate to your Worker Profile, click the Career link in the left hand navigation menu and then update the sections in your Professional Profile before you apply. This information will be pulled in to your application. The application is one page and you will be prompted to upload your resume. In addition, you must respond to the application questionspresented to upload any additional Required Materials (letter of interest, references, etc.) that were noted above. Employment Eligibility: Regular staff who have been employed in their current position for the last six continuous months are eligible for openings being recruited for through University-Wide or Open Recruiting, to include both promotional opportunities and lateral transfers. Staff who are promotion/transfer eligible may apply for positions without supervisor approval. Retirement Plan Eligibility: The retirement plan for this position is Teacher Retirement System of Texas (TRS), subject to the position being at least 20 hours per week and at least 135 days in length. This position has the option to elect the Optional Retirement Program (ORP) instead of TRS, subject to the position being 40 hours per week and at least 135 days in length. Background Checks: A criminal history background check will be required for finalist(s) under consideration for this position. Equal Opportunity Employer: The University of Texas at Austin, as an ___,complies with all applicable federal and state laws regarding nondiscrimination and affirmative action. The University is committed to a policy of equal opportunity for all persons and does not discriminate on the basis of race, color, national origin, age, marital status, sex, sexual orientation, gender identity, gender expression, disability, religion, or veteran status in employment, educational programs and activities, and admissions. Pay Transparency: The University of Texas at Austin will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Employment Eligibility Verification: If hired, you will be required to complete the federal Employment Eligibility Verification I-9 form. You will be required to present acceptable and original ___ to prove your identity and authorization to work in the United States. Documents need to be presented no later than the third day of employment. Failure to do so will result in loss of employment at the university. E-Verify: The University of Texas at Austin use E-Verify to check the work authorization of all new hires effective May 2015. The university's company ID number for purposes of E-Verify is 854197. For more information about E-Verify, please see the following: • ___ [PDF], • ___ [PDF], • ___ [PDF] Compliance: Employees may be required to report violations of law under Title IX and the Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act (Clery Act). If this position is identified a Campus Security Authority (Clery Act), you will be notified and provided resources for reporting. Responsible employees under Title IX are defined and outlined in ___. The Clery Act requires all prospective employees be notified of the availability of the Annual Security and Fire Safety report. You may ___ or obtain a copy at University Compliance Services, 1616 Guadalupe Street, UTA 2.206, Austin, Texas 78701.

Job Posting Title: Linux Security Engineering Scientist Associate Hiring Department: Applied Research Laboratories Position Open To: All Applicants Weekly Scheduled Hours: 40 FLSA Status: Exempt Earliest Start Date: Immediately Position Duration: Expected to Continue Location: PICKLE RESEARCH CAMPUS Job Details: Develop, test, integrate and document information security in large modern TCP/IP Linux network systems in the Advanced Technology Laboratory (ATL) with ARL:UT. * Design and develop the information security of modern TCP/IP Linux network systems including security settings, audit mechanisms, compliance mechanisms and infrastructure mechanisms. * Design and develop information security automation of modern computer Linux network systems including security settings, audit mechanisms, compliance mechanisms and infrastructure mechanisms. * Test, troubleshoot, integrate, audit and profile information security mechanisms of Linux computer network systems to meet system requirements. * Document and configuration manage information security mechanisms of modern Linux computer network equipment. * Interact with security and technical personnel in support of information security implementation of modern Linux computer network systems. * Other related functions as assigned. * Bachelor's degree in Electrical Engineering, Computer Science or related degree. * Demonstrated knowledge designing, configuring, troubleshooting, testing, validating, auditing and documenting information security mechanisms for modern TCP/IP Linux computer network systems. * Knowledge and experience with information security principles, policies, compliance and documentation while maintaining high performance. * Experience with Linux and network security fundamentals. * Experience with security monitoring, profiling, auditing and documenting performance across the full network stack. US Citizen. Selected applicant is subject to government security investigation and must meet eligibility requirements for access to classified information at level appropriate to project requirements of the position. * Master's degree in Electrical Engineering or Computer Science with focus on information security as applied to Linux network computer systems. * Two or more years of professional experience as a Electrical Engineer or Computer Scientist. * Knowledge and experience with security and hardening Linux systems. * Linux, network, or information security certification * Eligibility for immediate access to classified information. * 3.0 minimum GPA requirement . An agency designated by the federal government handles the investigation as to the requirement for eligibility for access to classified information. Factors considered during this investigation include but are not limited to allegiance to the United States, foreign influence, foreign preference, criminal conduct, security violations, drug involvement, the likelihood of continuation of such conduct, etc. Please mark "yes" on the application question that asks if additional materials are required. Failure to attach all additional materials listed below may result in a delay in application processing. Visit our website (___) for additional information about Applied Research Laboratories. UT Austin offers a competitive benefits package that includes: • 100% employer-paid basic medical coverage, • Retirement contributions, • Paid vacation and sick time $88,500-$120,000+/negotiable depending on qualifications. * Standard office conditions * Repetitive use of a keyboard at a workstation * Use of manual dexterity * Some weekend, evening and holiday work * Possible interstate/intrastate travel * Resume/CV * 3 work references with their contact information; at least one reference should be from a supervisor * Letter of interest * Unofficial college transcripts Importantfor applicants who are NOT current university employees or contingent workers:You will be prompted to submit your resume the first time you apply, then you will be provided an option to upload a new Resume for subsequent applications. Any additional Required Materials (letter of interest, references, etc.) will be uploaded in the Application Questions section; you will be able to multi-select additional files. Before submitting your online job application, ensure thatALLRequired Materials have been uploaded. Once your job application has been submitted, you cannot make changes. Important for Current university employees and contingent workers:As a current university employee or contingent worker, you MUST apply within Workday by searching for Find UT Jobs. If you are a current University employee, log-in to Workday, navigate to your Worker Profile, click the Career link in the left hand navigation menu and then update the sections in your Professional Profile before you apply. This information will be pulled in to your application. The application is one page and you will be prompted to upload your resume. In addition, you must respond to the application questionspresented to upload any additional Required Materials (letter of interest, references, etc.) that were noted above. Employment Eligibility: Regular staff who have been employed in their current position for the last six continuous months are eligible for openings being recruited for through University-Wide or Open Recruiting, to include both promotional opportunities and lateral transfers. Staff who are promotion/transfer eligible may apply for positions without supervisor approval. Retirement Plan Eligibility: The retirement plan for this position is Teacher Retirement System of Texas (TRS), subject to the position being at least 20 hours per week and at least 135 days in length. Background Checks: A criminal history background check will be required for finalist(s) under consideration for this position. Equal Opportunity Employer: The University of Texas at Austin, as an ___,complies with all applicable federal and state laws regarding nondiscrimination and affirmative action. The University is committed to a policy of equal opportunity for all persons and does not discriminate on the basis of race, color, national origin, age, marital status, sex, sexual orientation, gender identity, gender expression, disability, religion, or veteran status in employment, educational programs and activities, and admissions. Pay Transparency: The University of Texas at Austin will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Employment Eligibility Verification: If hired, you will be required to complete the federal Employment Eligibility Verification I-9 form. You will be required to present acceptable and original ___ to prove your identity and authorization to work in the United States. Documents need to be presented no later than the third day of employment. Failure to do so will result in loss of employment at the university. E-Verify: The University of Texas at Austin use E-Verify to check the work authorization of all new hires effective May 2015. The university's company ID number for purposes of E-Verify is 854197. For more information about E-Verify, please see the following: • ___ [PDF], • ___ [PDF], • ___ [PDF] Compliance: Employees may be required to report violations of law under Title IX and the Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act (Clery Act). If this position is identified a Campus Security Authority (Clery Act), you will be notified and provided resources for reporting. Responsible employees under Title IX are defined and outlined in ___. The Clery Act requires all prospective employees be notified of the availability of the Annual Security and Fire Safety report. You may ___ or obtain a copy at University Compliance Services, 1616 Guadalupe Street, UTA 2.206, Austin, Texas 78701.

Job Posting Title: Infrastructure Software Engineer, Pestilli Lab Hiring Department: Department of Psychology Position Open To: All Applicants Weekly Scheduled Hours: 40 FLSA Status: Exempt Earliest Start Date: Immediately Position Duration: Expected to Continue Until Aug 31, 2025 Location: UT MAIN CAMPUS Job Details: The ___ in the Department of Psychology collaborates with scientists and developers across the globe. We develop standards and technology for the management and processing of brain and health data. Simplifying the way data is stored, processed, analyzed and shared can improve scientific understanding and education. The ___ promotes progress in psychological and brain science via the democratization of scientific research, methods, data and infrastructure. We strive to advance societal good by accelerating neuroscientific discovery and education via data-science applications and innovative technology. This is a one-year position with the chance to renew yearly based on performance. Dr. Franco Pestilli in the Department of Psychology is hiring an Infrastructure Software Engineer for the Pestilli Lab. • Database Design & Development: Architect and implement scalable and efficient database solutions to handle large volumes of neuroscience data. Ensure data integrity, security, and accessibility., • Cloud Infrastructure: Build and manage cloud-based infrastructure to support the storage, processing, and analysis of neuroscience data. Leverage cloud services to enhance data availability and performance., • Containerization & Orchestration: Utilize Docker for containerizing applications and Kubernetes for orchestrating and managing containerized applications in a cloud environment., • Documentation & Best Practices: Maintain comprehensive documentation for database systems, code, and processes. Implement and promote best practices for software development and data management., • Collaboration: Work closely with research teams to understand their data requirements and provide technical solutions that meet their needs. Communicate effectively with cross-functional teams to integrate data systems seamlessly., • Performance Optimization: Monitor and optimize database performance, addressing any issues related to scalability, latency, and data retrieval., • Education: Bachelor's degree in Computer Science, Software Engineering, or a related field. Advanced degrees or equivalent experience in relevant areas is a plus., • Experience: At least one year of experience in back-end software development with a strong focus on database infrastructure and cloud computing., • Technical Skills: Proficiency in database management systems (e.g., PostgreSQL, NoSQL). Experience with cloud platforms (e.g., AWS, Azure, Google Cloud). Hands-on experience with Docker for containerization. Understanding of Kubernetes for container orchestration. Understanding of networking, TCP/IP, HTTP, firewall. Knowledge of programming languages such as Python and JavaScript. Familiarity with data security and best practices for privacy. Relevant education and experience may be substituted as appropriate. • Experience: At least three years of experience in back-end software development with a strong focus on database infrastructure and cloud computing., • Soft Skills: Strong problem-solving skills and the ability to work independently. Excellent communication and teamwork abilities. Detail-oriented with a commitment to delivering high-quality work. $70,000+dependingonqualifications • May work around standard office conditions, • Repetitive use of a keyboard at a workstation, • Use of manual dexterity Resume/CV • 3 work references with their contact information; at least one reference should be from a supervisor, • Letter of interest Importantfor applicants who are NOT current university employees or contingent workers:You will be prompted to submit your resume the first time you apply, then you will be provided an option to upload a new Resume for subsequent applications. Any additional Required Materials (letter of interest, references, etc.) will be uploaded in the Application Questions section; you will be able to multi-select additional files. Before submitting your online job application, ensure thatALLRequired Materials have been uploaded. Once your job application has been submitted, you cannot make changes. Important for Current university employees and contingent workers:As a current university employee or contingent worker, you MUST apply within Workday by searching for Find UT Jobs. If you are a current University employee, log-in to Workday, navigate to your Worker Profile, click the Career link in the left hand navigation menu and then update the sections in your Professional Profile before you apply. This information will be pulled in to your application. The application is one page and you will be prompted to upload your resume. In addition, you must respond to the application questionspresented to upload any additional Required Materials (letter of interest, references, etc.) that were noted above. Employment Eligibility: Regular staff who have been employed in their current position for the last six continuous months are eligible for openings being recruited for through University-Wide or Open Recruiting, to include both promotional opportunities and lateral transfers. Staff who are promotion/transfer eligible may apply for positions without supervisor approval. Retirement Plan Eligibility: The retirement plan for this position is Teacher Retirement System of Texas (TRS), subject to the position being at least 20 hours per week and at least 135 days in length. Background Checks: A criminal history background check will be required for finalist(s) under consideration for this position. Equal Opportunity Employer: The University of Texas at Austin, as an ___,complies with all applicable federal and state laws regarding nondiscrimination and affirmative action. The University is committed to a policy of equal opportunity for all persons and does not discriminate on the basis of race, color, national origin, age, marital status, sex, sexual orientation, gender identity, gender expression, disability, religion, or veteran status in employment, educational programs and activities, and admissions. Pay Transparency: The University of Texas at Austin will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Employment Eligibility Verification: If hired, you will be required to complete the federal Employment Eligibility Verification I-9 form. You will be required to present acceptable and original ___ to prove your identity and authorization to work in the United States. Documents need to be presented no later than the third day of employment. Failure to do so will result in loss of employment at the university. E-Verify: The University of Texas at Austin use E-Verify to check the work authorization of all new hires effective May 2015. The university's company ID number for purposes of E-Verify is 854197. For more information about E-Verify, please see the following: • ___ [PDF], • ___ [PDF], • ___ [PDF] Compliance: Employees may be required to report violations of law under Title IX and the Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act (Clery Act). If this position is identified a Campus Security Authority (Clery Act), you will be notified and provided resources for reporting. Responsible employees under Title IX are defined and outlined in ___. The Clery Act requires all prospective employees be notified of the availability of the Annual Security and Fire Safety report. You may ___ or obtain a copy at University Compliance Services, 1616 Guadalupe Street, UTA 2.206, Austin, Texas 78701.

ABOUT ENOVIS Enovis Corporation (NYSE: ENOV) is an innovation-driven medical technology growth company dedicated to developing clinically differentiated solutions that generate measurably better patient outcomes and transform workflows. Powered by a culture of continuous improvement, global talent and innovation, the Company's extensive range of products, services and integrated technologies fuels active lifestyles in orthopedics and beyond.For more information about Enovis, please visit ___. What You'll Do At Enovis we pay attention to the details. We embrace collaboration with our partners and patients, and take pride in the pursuit of scientific excellence - with the goal of transforming medical technology as we know it. Because that's how we change the lives of patients for the better. And that's how we create better together. Why work at Enovis? ___. As a key member of the Surgical R&D Team you will play an integral part in helping Enovis drive the medical technology industry forward through transforming patient care and creating better patient outcomes. Job Title: Senior Product Development Engineer Reports To: Sr. Engineering Manager Location: Austin, TX Business Unit Description: Driven by Enovis' desire to create innovative products that help improve quality of life and restore movement to those suffering from degenerative arthritis, Enovis Surgical provides orthopedic surgeons with modern, patient-focused solutions for total joint arthroplasty.Enovis Surgical offers surgeons and their patients a full range of primary and revision implants for hip, knee, shoulder, and elbow reconstructive joint surgeries, in addition to the tools and digital health technology needed in today's changing healthcare environment. Job Title/High-Level Position Summary: Participates in all aspects of the projects from proposal to final design/release for the assigned project by performing the following duties. Works with a cross-functional product team consisting of product development engineers, marketing product managers, manufacturing engineers, regulatory and QA engineers in the design and development of surgical instruments and implants medical devices used in Total Shoulder Arthroplasty. Key Responsibilities: • Participates as an active member of the New Product Development Team:, • Identifies and incorporates surgeon design requirements and product characteristics, • Confers with cross-function teams (by way of example and not exclusion, Manufacturing Engineering, Purchasing and Regulatory); accepts and completes tasks as assigned, • Creates product designs and documentation used to substantiate those devices (i.e. risk assessments, verification / validation activities, design review documentation, etc.), • Uses 3-D Modeling to develop concepts and mechanism design (Solidworks), • Compiles Design Dossiers or Design History Files, • Assuring compliance to FDA and ISO regulations and internal procedures, • Establishing and maintaining project schedule and budget, • Reviewing designs for feasibility, accuracy and technical soundness, • Defining and implementing testing requirements associated with projects, • Participate in the evaluation of new concepts presented to Enovis Surgical by surgeons or other Enovis Surgical employees., • Collaborate / lead other engineering personnel in formulating project plans, designs, cost estimates, and specifications., • Assures proper preparation of documentation as required per project plans including user needs, surgeon feedback / IP, engineering drawings, test plans, manufacturing instructions, design verification and validation, engineering change notices, artwork and other supporting engineering documents., • Working with manufacturing, supply chain and quality assurance, reviews and monitors quality and process improvements for new product development., • Participates in surgeon symposia, focus groups and surgeon consultant meetings, • Assists product development engineers and the Engineering Manager or Director of Shoulder ProductDevelopmentwithNew Product Development projects, • Attends cadaver labs for learning purposes, • To perform the job successfully, an individual should demonstrate the following competencies:, • Analytical - Synthesizes complex or diverse information, • Design - Demonstrates attention to detail, • Problem Solving - Identifies and resolves problems in a timely manner; gathers and analyzes information skillfully; develops alternative solutions; uses reason even when dealing with emotional topics, • Project Management - Communicates changes and progress, • Technical Skills - Assesses own strengths and weaknesses; pursues training and development opportunities; strives to continuously build knowledge and skills, • Oral Communication - Speaks clearly and persuasively in positive or negative situations; listens and gets clarification, • Written Communication - Writes clearly and informatively; varies writing style to meet needs; able to read and interpret written information; writes detailed test protocols/reports, • Quality Management - Looks for ways to improve and promote quality; demonstrates accuracy and thoroughness, • Business Acumen - Understands business implications of decisions, • Diversity - Shows respect and sensitivity for cultural differences; promotes a harassment-free environment, • Judgment - Exhibits sound and accurate judgment; includes appropriate people in decision-making process, • Safety and Security - Observes safety and security procedures; reports potentially unsafe conditions; uses equipment and materialsproperly Currently, Enovis does not provide sponsorship for employment visas (e.g., H-1B) and will not offer such sponsorship in the future. Applicants must already have full-time work authorization in the United States, both now and in the future, without requiring sponsorship. Minimum Basic Qualifications: • A minimum of 8 years of design / development experience; engineering co-op or internships is strongly desirable, • BS in Mechanical Engineering, Biomedical Engineering, or equivalent, • Knowledge of Word Processing software; spreadsheet software; internet software; contact / change management systems, • Experience with 3D CAD packages (SolidWorks preferred) Desired Characteristics: • Experience in medical devices and/or orthopedics preferred, • Experience working in a regulated industry preferred, • Ability to present information and respond to questions from groups of managers, clients, and customers, • Ability to respond to common inquiries or complaints from customers, regulatory agencies, sales representatives, design surgeons, or members of the business community, • Ability to apply advanced mathematical concepts such as exponents, logarithms, quadratic equations, and permutations, • Ability to apply mathematical operations to such tasks as frequency distribution, determination of test reliability and validity, statistical analysis, • Ability to define problems, collect data, establish facts, and draw valid conclusions, • Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables Travel Requirements: • 10% Work Environment: • While performing the duties of this job, the employee is exposed to the manufacturing environment as required by local ordinance, • While performing the duties of this job, the employee is exposed to the office environment as required by local ordinance, • Employee is expected to work in varying environments, including office setting, mechanical testing lab, and cadaver lab, • The noise level in the work environment is usually moderate Physical Demands: • While performing the duties of this job, the employee is regularly required to sit, talk, and hear, • The employee frequently is required to sit and use hands to operate computer keyboard, and telephone., • The employee is frequently required to stand, walk, and reach with hands and arms, • This position works in a typical office/manufacturing/warehouse environment, • The employee must occasionally lift and/or move up to 30 pounds, • The noise level in the work environment is usually moderate, • This position works in a typical office environment, • Perform job duties for 8 or more hours a day, • Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus "Creating better together". It's the Enovis purpose, and it's what drives us and empowers us every day on a global scale. We know that the power to create better - for our customers, our team members, and our shareholders - begins with having the best team, pursuing common goals, operating at the highest levels, and delivering extraordinary outcomes. What does creating better together mean to us at Enovis? Discover the "why" behind our purpose, values and behaviors: We offer a comprehensive benefits package that includes: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Spending and Savings Accounts, • 401(k) Plan, • Vacation, Sick Leave, and Holidays, • Income Protection Plans, • Discounted Insurance Rates, • Legal Services ABOUT ENOVIS Enovis Corporation (NYSE: ENOV) is an innovation-driven medical technology growth company dedicated to developing clinically differentiated solutions that generate measurably better patient outcomes and transform workflows. Powered by a culture of continuous improvement, global talent, and innovation, the company's extensive range of products, services, and integrated technologies fuels active lifestyles in orthopedics and beyond. Visit ___ to learn more. EQUAL EMPLOYMENT OPPORTUNITY Enovis provides equal employment opportunities based on merit, experience, and other work-related criteria without regard to race, color, ethnicity, religion, national origin, sex, age, pregnancy, disability, veteran status, or any other status protected by applicable law. We also strive to provide reasonable accommodation to employees' beliefs and practices that do not conflict with Enovis policies and applicable law. We value the unique contributions that every employee brings to their role with Enovis. Join us in creating better together. EOE AA M/F/VET/Disability Statement All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, religion, color, national origin, sex, protected veteran status, disability, or any other basis protected by federal, state or local laws.

Job Posting Title: Casual Worker - Stagehand, Texas Athletics Hiring Department: Intercollegiate Athletics Position Open To: All Applicants Weekly Scheduled Hours: 5 FLSA Status: Non-Exempt Earliest Start Date: Immediately Position Duration: Expected to Continue Until May 31, 2022 Location: AUSTIN, TX Job Details: Serve as a stagehand and/or high and ground rigger to perform tasks required for the delivery of stage craft services in full-service multi-purpose public assembly facilities. Opportunities to be trained on specific equipment and advancement into skilled roles are available! Specific position and pay rate will be determined based on experience and qualifications of each applicant. • Participate in the setup and tear down of concerts, men's and women's basketball and other events, • Build and disassemble truss, hanging lights, audio arrays, running cable, scenic structures and laying deck, • Maintain and repair stage equipment, including theatrical lighting instruments, sound reinforcement systems, projection equipment, winch systems and curtains, • Operate all stage equipment required for the successful completion of professional entertainment events, private facility uses and maintenance projects, • Design, hang, focus and operate theatrical stage lighting systems. Set-up and operate sound reinforcement systems, projection and communication equipment, • Maintain inventory of expendable supplies (i.e., lamps, color filters, gaffer's tape, etc.), • Establish and maintain effective working relationships with co-workers and other University personnel, • Performs other related duties as required, • Consistently exemplify the core values and quality service standards of Texas Athletics. Always act ethically. Proactively seek guidance when unsure or unclear of a law, rule or policy applicable to you or your department/sport program. Actively participate in assigned education and training programs. Comply with all laws, policies, rules and regulations set forth by the Board of Regents of The University of Texas System, The University of Texas at Austin, NCAA, Conference, or other governing body, including state and federal laws.Annually obtain prior written approval and report all outside activities and outside income. Report knowledge of, or reasonable cause to believe, violation(s) of state or federal laws, policies, rules, or regulations of the University, Conference, or NCAA to IA ARMCS or IA HR.Fully cooperate with any investigation by providing complete and accurate information when requested to do so by Texas Athletics and/or the NCAA and do not influence others in any way during an investigation. In compliance with Title IX of the Education Amendments of 1972 and Texas Education Code Sec. 51.252, this position may be a Non-Confidential Employee as defined by University policies on Sex Discrimination, Sexual Harassment, Sexual Assault, Interpersonal Violence and Stalking. As a Non-Confidential Employee, individuals employed in this position will report incidents of such prohibited conduct to the University's Title IX Coordinator or Deputy Title IX Coordinator as required by applicable law or University policy. An employee who does not report an incident or who makes a false report is subject to termination and may be charged with a criminal offense (Class A or Class B misdemeanor). For more information about employee responsibilities under Title IX, including information about confidential employee reporting exceptions, please visit the Title IX website at ___., • Diploma (High School) or GED, • Any entry level experience in carpentry, electronics, construction or other manual labor., • Ability to collaborate with others and follow instructions., • Extensive knowledge in concert stage rigging for high and ground riggers. Relevant education and experience may be substituted as appropriate. • A completed apprenticeship would be advantageous., • Stagehands: Lift Operators (fork, scissor, boom, etc.) certification. Skills in audio, lighting, video and/or scenic carpentry. Experience as a live performance engineer/programmer., • Rigging: SPRAT/IRATA certification and rope access training. ETCP Certification. Starting stagehand: $15 per hour + depending on qualifications, certifications, and experience level • Long and varied hours., • Work performed on multiple projects concurrently, under pressure of rigid deadlines and time limitations at all times of the day and night and on weekends and holidays., • High rigger work may be performed on a gridiron one hundred feet above the arena floor., • Physically demanding work including walking for several hours at a time., • Stagehands and riggers must have the ability to lift at least 50 pounds., • Work is offered on an as-needed and sporadic basis., • Work opportunities occur at all times of the day and night and on weekends and holidays. Resume/CV • 3 work references with their contact information; at least one reference should be from a supervisor, • Letter of interest Importantfor applicants who are NOT current university employees or contingent workers:You will be prompted to submit your resume the first time you apply, then you will be provided an option to upload a new Resume for subsequent applications. Any additional Required Materials (letter of interest, references, etc.) will be uploaded in the Application Questions section; you will be able to multi-select additional files. Before submitting your online job application, ensure thatALLRequired Materials have been uploaded. Once your job application has been submitted, you cannot make changes. Important for Current university employees and contingent workers:As a current university employee or contingent worker, you MUST apply within Workday by searching for Find UT Jobs. If you are a current University employee, log-in to Workday, navigate to your Worker Profile, click the Career link in the left hand navigation menu and then update the sections in your Professional Profile before you apply. This information will be pulled in to your application. The application is one page and you will be prompted to upload your resume. In addition, you must respond to the application questionspresented to upload any additional Required Materials (letter of interest, references, etc.) that were noted above. Employment Eligibility: Regular staff who have been employed in their current position for the last six continuous months are eligible for openings being recruited for through University-Wide or Open Recruiting, to include both promotional opportunities and lateral transfers. Staff who are promotion/transfer eligible may apply for positions without supervisor approval. Retirement Plan Eligibility: The retirement plan for this position is Teacher Retirement System of Texas (TRS), subject to the position being at least 20 hours per week and at least 135 days in length. Background Checks: A criminal history background check will be required for finalist(s) under consideration for this position. Equal Opportunity Employer: The University of Texas at Austin, as an ___,complies with all applicable federal and state laws regarding nondiscrimination and affirmative action. The University is committed to a policy of equal opportunity for all persons and does not discriminate on the basis of race, color, national origin, age, marital status, sex, sexual orientation, gender identity, gender expression, disability, religion, or veteran status in employment, educational programs and activities, and admissions. Pay Transparency: The University of Texas at Austin will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Employment Eligibility Verification: If hired, you will be required to complete the federal Employment Eligibility Verification I-9 form. You will be required to present acceptable and original ___ to prove your identity and authorization to work in the United States. Documents need to be presented no later than the third day of employment. Failure to do so will result in loss of employment at the university. E-Verify: The University of Texas at Austin use E-Verify to check the work authorization of all new hires effective May 2015. The university's company ID number for purposes of E-Verify is 854197. For more information about E-Verify, please see the following: • ___ [PDF], • ___ [PDF], • ___ [PDF], • ___ [PDF] Compliance: Employees may be required to report violations of law under Title IX and the Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act (Clery Act). If this position is identified a Campus Security Authority (Clery Act), you will be notified and provided resources for reporting. Responsible employees under Title IX are defined and outlined in ___. The Clery Act requires all prospective employees be notified of the availability of the Annual Security and Fire Safety report. You may ___ or obtain a copy at University Compliance Services, 1616 Guadalupe Street, UTA 2.206, Austin, Texas 78701.

Job Posting Title: Senior/Principal EDA Engineer, Electronic Design Automation, Texas Institute for Electronics Hiring Department: Texas Institute for Electronics Position Open To: All Applicants Weekly Scheduled Hours: 40 FLSA Status: To Be Determined at Offer Earliest Start Date: Ongoing Position Duration: Expected to Continue Location: PICKLE RESEARCH CAMPUS Job Details: About TIE Texas Institute for Electronics (TIE) is a transformative, well-funded semiconductor foundry venture combining the agility of a startup with the scale of a national initiative. Our Mission A key part of our mission is to advance the state of the art in 3D heterogeneous integration (3DHI), chiplet-based architectures, and multi-component microsystems- catalyzing breakthroughs across microelectronics, artificial intelligence, quantum computing, high-performance computing, and next-generation healthcare devices. Our Impact Backed by $1.4 billion in combined funding from DARPA, Texas state initiatives, and strategic partners, we are building foundational capabilities in advanced packaging and integrated design infrastructure to restore U.S. leadership in microelectronics manufacturing. Our Technology Our 3DHI and chiplet integration platforms integrate novel thermal management and advanced interconnect solutions to deliver unprecedented performance and energy efficiency. Operating at the intersection of defense electronics and commercial markets, TIE offers a rare opportunity to reimagine an industry from the ground up and build transformative products with global impact. The Principal EDA Engineer will drive the hands-on implementation of electronic design automation (EDA) solutions for TIE's multi-component and chiplet integration platforms. The Principal Engineer will focus on developing and optimizing design kits, simulation methodologies, and reference flows from concept to deployment, acting as a key technical contributor and innovator. • Support the EDA implementation roadmap for TIE; multi-component and chiplet integration platforms, working hands-on with design kits, simulation tools, and reference flows., • Develop and maintain comprehensive process design kits (PDKs) and assembly design kits (ADKs), including modeling, verification, and enablement collateral to accelerate customer adoption., • Work directly with EDA tools (Synopsys, Cadence, Ansys, Siemens) and packaging design teams to integrate electrical, thermal, and mechanical simulation workflows. Serve as a technical resource in design reviews and customer engagements., • Work on Jira, Version Control tools to enable the Internal and External Development teams., • Apply AI based deployment of the EDA flows, PDK development., • Collaborate with engineering, packaging design, product marketing, and EDA vendors to ensure design enablement flows are validated, documented, and continuously refined., • Create detailed technical documentation, user guides, reference flows, and onboarding materials to support customer design teams., • Assist in program planning activities covering scope, schedules, risk mitigation, and resource allocation to support predictable execution., • Monitor EDA market trends and competitive developments, providing technical insights to guide tool integration decisions and platform improvements., • Support program transparency and accountability, ensuring technical deliverables are on track and stakeholders are informed of progress and risks., • Drive the strategic vision and implementation roadmap for EDA across TIE; multi-component and chiplet integration platforms-spanning design kits, simulation tools, and reference flows from concept to production deployment., • Lead technical development of comprehensive process design kits (PDKs) and assembly design kits (ADKs), including multi-physics modeling, qualification strategies, and customer enablement collateral. Own roadmap decisions and quality standards., • Set technical direction for EDA packaging workflows, establishing best practices and qualification criteria that span electrical, RF, thermal, and mechanical simulation domains. Represent TIE as a technical authority in industry working groups, customer design reviews, and ecosystem partnerships., • Manage relationships with TIE subcontractors, vendors, and EDA partners (Synopsys, Cadence, Ansys, Siemens). Define clear Statements of Work (SoW) with quantifiable metrics, monitor milestone progress, and adjust deliverables and payable milestones as needed to ensure accountability., • Drive cross-functional collaboration with engineering, packaging design, product marketing, and major EDA vendors to align design enablement flows, establish validation protocols, and continuously improve platform capabilities., • Develop and execute detailed program plans covering scope, schedules, risk mitigation, resource allocation, and customer communication. Deliver predictable outcomes in fast-paced, multi-stakeholder engagements., • Own the creation of comprehensive technical documentation, reference architectures, onboarding frameworks, and strategic collateral that position TIE as an EDA innovator and strengthen customer confidence., • Monitor EDA market trends, competitive developments, and emerging technologies. Provide actionable strategic insights to guide tool integration roadmap, design enablement priorities, and platform differentiation., • Champion a culture of accountability and transparency across all program workstreams. Ensure stakeholders are informed, expectations are clearly defined and communicated, and commitments are met. Mentor junior technical staff and build high-performing teams., • BS in Electrical Engineering, Computer Engineering, or related discipline., • 8+ years of experience in Electronic Design Automation (EDA), semiconductor design enablement, or advanced packaging workflows., • Deep technical expertise with Synopsys, Cadence, Ansys, or Siemens design flows for chiplet and heterogeneous integration., • Hands-on experience building and deploying packaging-related PDKs/ADKs. Strong understanding of modeling, simulation, and qualification across electrical, RF, mechanical, and thermal domains., • Exceptional communication skills. You can simplify the complex, create clear technical deliverables, and build trust with technical and business audiences., • Startup DNA. You are energized by ambiguity, act with urgency, and take personal ownership of technical outcomes., • Execution mindset. You have demonstrated experience working in a hands-on role driving technical progress across multiple initiatives., • Location. Austin, Texas is preferred for close collaboration with our engineering teams and partners. Hybrid work arrangements may be possible with travel up to 30-50%. Such arrangements are subject to University review and approval in relation to jurisdictional employment-related laws, rules, and regulations., • MS or PhD in Electrical Engineering, Computer Engineering, or a related discipline., • 12+ years of experience in Electronic Design Automation (EDA), semiconductor design enablement, advanced packaging workflows, or related technical leadership., • Demonstrated expertise with Synopsys, Cadence, Ansys, or Siemens design flows. Proven ability to guide tool strategy, qualification methodology, and integration roadmaps., • Proven track record of designing, deploying, and managing PDK/ADK programs at scale. Deep expertise in multi-physics modeling, simulation qualification, and cross-domain validation strategies., • Strong program management experience. Demonstrated success defining program scope, managing multi-stakeholder dependencies, holding teams accountable to milestones, and delivering results in complex environments., • Proven vendor and partner management skills. You can clearly define expectations, structure Statements of Work with quantifiable deliverables, and hold teams accountable to milestones and quality standards., • Exceptional communication and executive presence. You simplify the complex, inspire confidence in both technical and business audiences, and are a sought-after technical leader., • Entrepreneurial mindset and demonstrated ability to build technical programs and teams from the ground up. You thrive in ambiguous environments and drive results with urgency., • Location. Austin, Texas is preferred for close collaboration with our engineering teams and partners. Hybrid work arrangements may be possible with travel up to 30-50%. Such arrangements are subject to University review and approval in relation to jurisdictional employment-related laws, rules, and regulations., • MS or PhD in Electrical Engineering, Computer Engineering, or a related discipline., • Prior experience supporting program planning, milestone tracking, and cross-functional coordination in complex technical projects., • Exposure to vendor and partner collaboration on design enablement initiatives., • Prior experience as a technical leader or principal engineer in semiconductor, EDA, or advanced packaging contexts., • Demonstrated mentoring and team-building capabilities; you have developed junior technical talent and fostered high-performing engineering organizations., • Visibility in industry forums, standards bodies, or EDA vendor partnerships. Strong reputation as a technical innovator and thought leader in chiplet and heterogeneous integration. TIE Pays Industry Competitive Salaries • Uniforms and/or personal protection equipment (furnished), • May work in all weather conditions, • May work in extreme temperatures, • May work around chemical fumes, • May work around standard office conditions, • May work around biohazards, • May work around chemicals, • May work around electrical and mechanical hazards, • Repetitive use of a keyboard at a workstation, • Use of manual dexterity (ex: using a mouse), • Climbing of stairs, • Climbing of ladders, • Lifting and moving 25 pounds, • Resume/CV, • 3 work references with their contact information; at least one reference should be from a supervisor Importantfor applicants who are NOT current university employees or contingent workers:You will be prompted to submit your resume the first time you apply, then you will be provided an option to upload a new Resume for subsequent applications. Any additional Required Materials (letter of interest, references, etc.) will be uploaded in the Application Questions section; you will be able to multi-select additional files. Before submitting your online job application, ensure thatALLRequired Materials have been uploaded. Once your job application has been submitted, you cannot make changes. Important for Current university employees and contingent workers:As a current university employee or contingent worker, you MUST apply within Workday by searching for Find UT Jobs. If you are a current University employee, log-in to Workday, navigate to your Worker Profile, click the Career link in the left hand navigation menu and then update the sections in your Professional Profile before you apply. This information will be pulled in to your application. The application is one page and you will be prompted to upload your resume. In addition, you must respond to the application questionspresented to upload any additional Required Materials (letter of interest, references, etc.) that were noted above. Employment Eligibility: Regular staff who have been employed in their current position for the last six continuous months are eligible for openings being recruited for through University-Wide or Open Recruiting, to include both promotional opportunities and lateral transfers. Staff who are promotion/transfer eligible may apply for positions without supervisor approval. Retirement Plan Eligibility: The retirement plan for this position is Teacher Retirement System of Texas (TRS), subject to the position being at least 20 hours per week and at least 135 days in length. This position has the option to elect the Optional Retirement Program (ORP) instead of TRS, subject to the position being 40 hours per week and at least 135 days in length. Background Checks: A criminal history background check will be required for finalist(s) under consideration for this position. Equal Opportunity Employer: The University of Texas at Austin, as an ___,complies with all applicable federal and state laws regarding nondiscrimination and affirmative action. The University is committed to a policy of equal opportunity for all persons and does not discriminate on the basis of race, color, national origin, age, marital status, sex, sexual orientation, gender identity, gender expression, disability, religion, or veteran status in employment, educational programs and activities, and admissions. Pay Transparency: The University of Texas at Austin will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Employment Eligibility Verification: If hired, you will be required to complete the federal Employment Eligibility Verification I-9 form. You will be required to present acceptable and original ___ to prove your identity and authorization to work in the United States. Documents need to be presented no later than the third day of employment. Failure to do so will result in loss of employment at the university. E-Verify: The University of Texas at Austin use E-Verify to check the work authorization of all new hires effective May 2015. The university's company ID number for purposes of E-Verify is 854197. For more information about E-Verify, please see the following: • ___ [PDF], • ___ [PDF], • ___ [PDF] Compliance: Employees may be required to report violations of law under Title IX and the Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act (Clery Act). If this position is identified a Campus Security Authority (Clery Act), you will be notified and provided resources for reporting. Responsible employees under Title IX are defined and outlined in ___. The Clery Act requires all prospective employees be notified of the availability of the Annual Security and Fire Safety report. You may ___ or obtain a copy at University Compliance Services, 1616 Guadalupe Street, UTA 2.206, Austin, Texas 78701.

Job Posting Title: CADD Specialist Hiring Department: Applied Research Laboratories Position Open To: All Applicants Weekly Scheduled Hours: 40 FLSA Status: Non-Exempt Earliest Start Date: Immediately Position Duration: Expected to Continue Location: PICKLE RESEARCH CAMPUS Job Details: To provide technical and drafting skills in performing manual or computer-aided drafting and design (CADD) work. Responsible for compiling and organizing engineering and drafting data into usable form for the Advanced Technology Laboratory (ATL). * Time management, organization, and prioritization for timely completion of project tasks. * Work with other staff to achieve project goals and consistency of project documentation. * Specification of detailed technical assembly procedure documentation for mechanical and electrical components. * Assist designers and engineers with form-fit-function analysis. Knowledge of GD&T (geometric dimensioning and tolerancing). * Detailed modeling of mechanical and electrical components and assemblies. Creation and maintenance of library parts for use in assemblies and deliverable documentation. * Drafting of project documentation, drawing packages, and engineer design documentation. * Other related functions as assigned. * HS/GED * Three years of relevant experience. * Demonstrated knowledge in drafting and development of mechanical and electrical components using Solidworks computer-aided design (CAD) tools. * Demonstrated capability using and applying geometric dimensioning and tolerancing (GD&T) per ASME Y14.5. * Attention to detail. * Ability to produce clear, accurate, and easily interpretable documentation, and to quickly and correctly implement corrections to existing documents. * Critical thinking skills to produce clear and unambiguous documentation that conforms to ASME Y14.5 standards. * Ability to work several overlapping projects with various engineering teams. * Ability to work within an environment of rapidly changing priorities. Able to work under pressure, accept constructive criticism, and rapidly implement revisions with and without supervision. * Work with other staff as part of a multi-disciplinary team. * Regular and punctual attendance. * Demonstrated ability to maintain a professional demeanor, and work independently and as a team member. * Associate's degree in Engineering and Computer Aided Design - Mechanical Specialization with 1 year related experience. * Bachelor's degree in any discipline. * Experience in mechanical design, specification, fabrication and testing of mechanical assemblies, cable harness assemblies, and electronic printed circuit card assemblies. * Knowledge of manual milling, CNC milling and programming, general power tools, and the ability to inspect parts with calipers and micrometers. * Experience writing technical instructions. * Experience interfacing with vendors and machine shops to procure items. US Citizen: Subject to a government security investigation and must meet eligibility requirements for access to classified information at the level appropriate to the project requirements of the position. An agency designated by the federal government handles the investigation as to the requirement for eligibility for access to classified information. Factors considered during this investigation include but are not limited to allegiance to the United States, foreign influence, foreign preference, criminal conduct, security violations, drug involvement, the likelihood of continuation of such conduct, etc. Please mark "yes" on the application question that asks if additional materials are required. Failure to attach all additional materials listed below may result in a delay in application processing. Visit our website (___) for additional information about Applied Research Laboratories. UT Austin offers a competitive benefits package that includes: • 100% employer-paid basic medical coverage, • Retirement contributions, • Paid vacation and sick time $44,000-$50,000+/negotiable, depending on qualifications * Standard office conditions * Repetitive use of a keyboard at a workstation * Use of manual dexterity * Limited weekend, evening and holiday work * Possible interstate/intrastate travel * Resume/CV * 3 work references with their contact information; at least one reference should be from a supervisor * Letter of interest Importantfor applicants who are NOT current university employees or contingent workers:You will be prompted to submit your resume the first time you apply, then you will be provided an option to upload a new Resume for subsequent applications. Any additional Required Materials (letter of interest, references, etc.) will be uploaded in the Application Questions section; you will be able to multi-select additional files. Before submitting your online job application, ensure thatALLRequired Materials have been uploaded. Once your job application has been submitted, you cannot make changes. Important for Current university employees and contingent workers:As a current university employee or contingent worker, you MUST apply within Workday by searching for Find UT Jobs. If you are a current University employee, log-in to Workday, navigate to your Worker Profile, click the Career link in the left hand navigation menu and then update the sections in your Professional Profile before you apply. This information will be pulled in to your application. The application is one page and you will be prompted to upload your resume. In addition, you must respond to the application questionspresented to upload any additional Required Materials (letter of interest, references, etc.) that were noted above. Employment Eligibility: Regular staff who have been employed in their current position for the last six continuous months are eligible for openings being recruited for through University-Wide or Open Recruiting, to include both promotional opportunities and lateral transfers. Staff who are promotion/transfer eligible may apply for positions without supervisor approval. Retirement Plan Eligibility: The retirement plan for this position is Teacher Retirement System of Texas (TRS), subject to the position being at least 20 hours per week and at least 135 days in length. Background Checks: A criminal history background check will be required for finalist(s) under consideration for this position. Equal Opportunity Employer: The University of Texas at Austin, as an ___,complies with all applicable federal and state laws regarding nondiscrimination and affirmative action. The University is committed to a policy of equal opportunity for all persons and does not discriminate on the basis of race, color, national origin, age, marital status, sex, sexual orientation, gender identity, gender expression, disability, religion, or veteran status in employment, educational programs and activities, and admissions. Pay Transparency: The University of Texas at Austin will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Employment Eligibility Verification: If hired, you will be required to complete the federal Employment Eligibility Verification I-9 form. You will be required to present acceptable and original ___ to prove your identity and authorization to work in the United States. Documents need to be presented no later than the third day of employment. Failure to do so will result in loss of employment at the university. E-Verify: The University of Texas at Austin use E-Verify to check the work authorization of all new hires effective May 2015. The university's company ID number for purposes of E-Verify is 854197. For more information about E-Verify, please see the following: • ___ [PDF], • ___ [PDF], • ___ [PDF] Compliance: Employees may be required to report violations of law under Title IX and the Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act (Clery Act). If this position is identified a Campus Security Authority (Clery Act), you will be notified and provided resources for reporting. Responsible employees under Title IX are defined and outlined in ___. The Clery Act requires all prospective employees be notified of the availability of the Annual Security and Fire Safety report. You may ___ or obtain a copy at University Compliance Services, 1616 Guadalupe Street, UTA 2.206, Austin, Texas 78701.

This Jobot Job is hosted by: Holly Leahy Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $150,000 - $200,000 per year A bit about us: We are seeking a dedicated and detail-oriented Quality Technician to join our team. As a Quality Technician, you will play a critical role in ensuring the highest standards of quality in the manufacturing and assembly of cutting-edge electronics and components. This position will require you to collaborate closely with various teams to drive improvements and ensure products meet strict specifications and functional requirements. Why join us? premiere medical, dental, vision, and life insurance plans 401k Inclusive, flexible work environment. We offer healthy snacks and daily catered meals, in addition to family-friendly company events featuring our CEO’s famous BBQ! Job Details About the Role Join a world-class team building the next generation of high-performance compute hardware for artificial intelligence and machine learning applications. We’re developing industry-leading AI accelerators that push the limits of scale, speed, and efficiency—empowering researchers and enterprises to train and deploy the largest AI models with unprecedented ease. As a Senior Design Verification Engineer, you’ll own the end-to-end verification of a critical subsystem in our next-generation AI processor. You’ll collaborate with experts across architecture, RTL design, physical design, firmware, and validation to ensure flawless execution from concept to post-silicon bring-up. This is a high-impact role where your technical insight, leadership, and creativity will directly shape the success of our products. Key Responsibilities Own and drive the full verification lifecycle for a major IP block—from initial strategy through post-silicon validation. Define and implement advanced verification methodologies, test plans, and coverage metrics that ensure top-tier quality and performance. Develop and maintain UVM-based, constrained-random and directed testbenches. Collaborate closely with architecture and design teams to review specifications and ensure functional correctness and testability. Debug complex issues spanning simulation, emulation, and silicon. Enhance verification infrastructure and flows for improved scalability, coverage, and turnaround time. Mentor and guide junior engineers, promoting best practices and technical excellence. Provide clear communication and technical leadership on progress, risks, and schedules across teams. Qualifications 10+ years of design verification experience in complex ASIC/SoC projects. Deep proficiency in SystemVerilog and UVM. Strong understanding of verification planning, coverage closure, and constrained-random methodologies. Experience with industry-standard EDA tools, simulators, and debugging environments. Skilled in scripting languages (Python, Perl, or similar) for automation and productivity. Demonstrated success in cross-functional collaboration and problem-solving. Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, or a related field. Preferred Experience Verification of memory controllers, high-performance interconnects, or compute subsystems. Exposure to emulation, FPGA prototyping, or post-silicon bring-up. Contributions to developing scalable, reusable verification environments and methodologies. Proven ability to influence verification strategy and mentor others in advanced techniques. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Posting Title: Senior CADD Specialist Hiring Department: Applied Research Laboratories Position Open To: All Applicants Weekly Scheduled Hours: 40 FLSA Status: Non-Exempt Earliest Start Date: Immediately Position Duration: Expected to Continue Location: PICKLE RESEARCH CAMPUS Job Details: To provide advanced technical design and drafting skills in performing manual or computer-aided drafting and design (CADD) work. Responsible for preparing and organizing complex drawings and drawing trees for mechanical and electrical engineering data for the Advanced Technology Laboratory (ATL). * Time management, organization, and prioritization for timely completion of project tasks. * Work with other staff to achieve project goals and consistency of project documentation. * Assist other staff members in utilizing state of the art CAD tools. * Specification of detailed technical assembly procedure documentation for mechanical and electrical components. * Specification, verification, and procurement of system components. * Assembly, testing, and quality control inspection of electro-mechanical components. * Detailed review of technical drawings and their associated 3D models to ensure they meet all technical specifications and follow relevant standards. * Perform form-fit-function analysis with GD&T (geometric dimensioning and tolerancing) in mind. * Detailed design of mechanical and electrical components, assemblies and tools. * Creation and maintenance of library parts for use in assemblies and deliverable documentation. * Advanced drafting of project documentation, drawing packages, and engineer design documentation. * Other related functions as assigned. * HS/GED * Four years of relevant experience. * Demonstrated capability using and applying geometric dimensioning and tolerancing (GD&T) per ASME Y14.5. * Six months of related technical experience involving product development from conceptualization to manufacturing to final transition/delivery, including design, collaboration, execution, documentation, and revision. * Ability to produce clear, accurate, and easily interpretable documentation, and to quickly and correctly implement corrections to existing documents. * Professional experience interpreting and producing technical drawings per ASME Y14.5. * Ability to work several overlapping projects with various engineering teams. * Ability to work within an environment of rapidly changing priorities, and the ability to prioritize/resolve competing priorities. * Able to work under pressure, accept constructive criticism, and rapidly implement revisions with and without supervision. * Experience writing technical instructions. * Effectively communicate with a varied group of coworker and client personality types. * Ability to efficiently and promptly communicate through multiple channels including email and collaboration/messaging platforms. * Regular and punctual attendance. * Attention to detail. * Demonstrated ability to maintain a professional demeanor and work as a team member. * Associate's degree in Engineering and Computer Aided Design - Mechanical Specialization with 5 years related experience. * Bachelor's degree in any discipline. * Experience in mechanical design, specification, fabrication and testing of mechanical assemblies, cable harness assemblies, and electronic printed circuit card assemblies. * Knowledge of manual milling, CNC milling and programming, general power tools, and the ability to inspect parts with calipers and micrometers. * Experience using electronic assembly and diagnostic equipment including soldering irons, oscilloscopes and multimeters. * Experience with detailed design and analysis of system hardware and complex mechanical-electrical systems. * Demonstrated ability to interface with machine shops to procure mechanical components based on ARL documentation, and with vendors to procure commercial off-the-shelf (COTS) parts. An agency designated by the federal government handles the investigation as to the requirement for eligibility for access to classified information. Factors considered during this investigation include but are not limited to allegiance to the United States, foreign influence, foreign preference, criminal conduct, security violations, drug involvement, the likelihood of continuation of such conduct, etc. Please mark "yes" on the application question that asks if additional materials are required. Failure to attach all additional materials listed below may result in a delay in application processing. Visit our website (___) for additional information about Applied Research Laboratories. UT Austin offers a competitive benefits package that includes: • 100% employer-paid basic medical coverage, • Retirement contributions, • Paid vacation and sick time US Citizen: Subject to a government security investigation and must meet eligibility requirements for access to classified information at the level appropriate to the project requirements of the position. $50,000-$56,000+/negotiable depending on qualifications. * Standard office conditions * Repetitive use of a keyboard at a workstation * Use of manual dexterity * Limited weekend, evening and holiday work * Possible interstate/intrastate travel * Resume/CV * 3 work references with their contact information; at least one reference should be from a supervisor * Letter of interest Importantfor applicants who are NOT current university employees or contingent workers:You will be prompted to submit your resume the first time you apply, then you will be provided an option to upload a new Resume for subsequent applications. Any additional Required Materials (letter of interest, references, etc.) will be uploaded in the Application Questions section; you will be able to multi-select additional files. Before submitting your online job application, ensure thatALLRequired Materials have been uploaded. Once your job application has been submitted, you cannot make changes. Important for Current university employees and contingent workers:As a current university employee or contingent worker, you MUST apply within Workday by searching for Find UT Jobs. If you are a current University employee, log-in to Workday, navigate to your Worker Profile, click the Career link in the left hand navigation menu and then update the sections in your Professional Profile before you apply. This information will be pulled in to your application. The application is one page and you will be prompted to upload your resume. In addition, you must respond to the application questionspresented to upload any additional Required Materials (letter of interest, references, etc.) that were noted above. Employment Eligibility: Regular staff who have been employed in their current position for the last six continuous months are eligible for openings being recruited for through University-Wide or Open Recruiting, to include both promotional opportunities and lateral transfers. Staff who are promotion/transfer eligible may apply for positions without supervisor approval. Retirement Plan Eligibility: The retirement plan for this position is Teacher Retirement System of Texas (TRS), subject to the position being at least 20 hours per week and at least 135 days in length. Background Checks: A criminal history background check will be required for finalist(s) under consideration for this position. Equal Opportunity Employer: The University of Texas at Austin, as an ___,complies with all applicable federal and state laws regarding nondiscrimination and affirmative action. The University is committed to a policy of equal opportunity for all persons and does not discriminate on the basis of race, color, national origin, age, marital status, sex, sexual orientation, gender identity, gender expression, disability, religion, or veteran status in employment, educational programs and activities, and admissions. Pay Transparency: The University of Texas at Austin will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Employment Eligibility Verification: If hired, you will be required to complete the federal Employment Eligibility Verification I-9 form. You will be required to present acceptable and original ___ to prove your identity and authorization to work in the United States. Documents need to be presented no later than the third day of employment. Failure to do so will result in loss of employment at the university. E-Verify: The University of Texas at Austin use E-Verify to check the work authorization of all new hires effective May 2015. The university's company ID number for purposes of E-Verify is 854197. For more information about E-Verify, please see the following: • ___ [PDF], • ___ [PDF], • ___ [PDF] Compliance: Employees may be required to report violations of law under Title IX and the Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act (Clery Act). If this position is identified a Campus Security Authority (Clery Act), you will be notified and provided resources for reporting. Responsible employees under Title IX are defined and outlined in ___. The Clery Act requires all prospective employees be notified of the availability of the Annual Security and Fire Safety report. You may ___ or obtain a copy at University Compliance Services, 1616 Guadalupe Street, UTA 2.206, Austin, Texas 78701.

Job Posting Title: Product Engineer I - II or Sr. Product Engineer, Texas Institute for Electronics Hiring Department: Texas Institute for Electronics Position Open To: All Applicants Weekly Scheduled Hours: 40 FLSA Status: Exempt Earliest Start Date: Immediately Position Duration: Expected to Continue Location: PICKLE RESEARCH CAMPUS Job Details: The ___ is a public-private partnership of preeminent semiconductor systems and defense electronics companies, national labs, and academic institutions. Our mission is to advance the state-of-the-art in critical semiconductor domains such as advanced packaging, and in the process to help restore U.S. leadership in semiconductor manufacturing. We are developing cutting-edge semiconductor manufacturing equipment and processes that will define future roadmaps of semiconductor logic, memory, heterogenous integration, chip cooling, etc. We are seeking a number of motivated individuals to join our team and help us in achieving the above goals. TIE is part of the ___ at The University of Texas at Austin (UT Austin), a global leader in technology innovation and engineering education for over a century. With 11 undergraduate and 13 graduate programs, over 20 research centers and a faculty community that boasts one of the highest number of National Academy of Engineering members among U.S. universities, Texas Engineering has launched some of the nation's most accomplished leaders and pioneered world-changing solutions in virtually every industry, from space exploration to energy to health care. Situated in the heart of Austin - named "America's Coolest City" by Expedia and "The Best Place to Live in the U.S." by U.S. News and World Report - the Cockrell School embodies the city's innovative spirit. Major companies with Austin campuses, such as Dell, National Instruments, Apple, IBM, Samsung, Google, Tesla, and many others, continue to recruit Cockrell School students at a remarkable rate, launching thousands of successful careers and developing Texas Engineers into industry leaders. At UT Austin, we say "What starts here changes the world." As a member of the university community, you will be part of an organization that is internationally recognized for our academic programs and research. Your work will have meaning and make a difference not only in the lives of our faculty, staff, and students, but also those who are impacted by our first class academic and research programs. UT Austin, recognized by Forbes as one of ___, provides outstanding ___ and ___ packages that include: * Competitive health benefits (employee premiums covered at 100%, family premiums at 50%) * Voluntary Vision, Dental, Life, and Disability insurance options * Generous paid vacation, sick time, and holidays * Teachers Retirement System of Texas, a defined benefit retirement plan, with 7.75% employer matching funds * Additional Voluntary Retirement Programs: Tax Sheltered Annuity 403(b) and a Deferred Compensation program 457(b) * Flexible spending account options for medical and childcare expenses * Robust free training access through LinkedIn Learning plus professional conference opportunities * Tuition assistance * Expansive employee discount program including athletic tickets. * Free access to UT Austin's libraries and museums with staff ID card * Free rides on all UT Shuttle and Austin CapMetro buses with staff ID card Multiple vacancies available. This position may be filled at a higher-level title, relative to the experience and qualifications of the selected candidate. Applicants must be authorized to work in the United States on a full-time basis for any employer without sponsorship. Relocation assistance may be available. We are bringing advanced semiconductor 3DHI packaging/manufacturing back to the USA and looking for motivated individuals to join our team. Responsible for IC & Test Structure product validation and optimization of manufacturing & Design processes to improve 3DHI yield, performance, & reliability across a wide range of customer heterogenous materials and micro-systems. Work closely with circuit/layout design, process integration, and TEST teams to define and create work flow solutions, and methodologies to ensure products produced at TIE have the highest possible performance, quality, & reliability. • Product and test vehicle validation to specifications, development and optimization of manufacturing/test workflows, 2.5D/3D modeling accuracies, creation of BKM's (Best Known Practices) to comprehend and optimize Power/Thermal/Mechanical/Signal Integrity/RF impacts of multi-chiplet and multi-domain heterogeneous micro-systems., • Contribute to the design and development of 2.5D & 3D advanced packaging solutions for semiconductor devices. Develop and support TIE's 3D-ADK (Assembly Design Kit)., • Interpret fab metrology, defect, E-test yield, and evaluate silicon-to-simulation correlation accuracies to understand and quantify process variations and their impacts on performance, yield, and reliability., • Drive corrective actions across cross-functional teams to fix and identify root-cause systematic yield and reliability issues. Perform Failure analysis on products manufactured at TIE, • Collaborate with internal and external design teams to ensure package compatibility with semiconductor die and system-level requirements. Design and execute appropriate DOE's, • Stay current with industry trends and emerging technologies in semiconductor packaging and design integration to drive innovation and continuous improvement., • Define product DFT & DFM requirements and methodologies. Help with ATE Test plan definitions and requirements., • Bench/lab validation and characterization of various IC solutions and test structures to understand multi-physics impacts of our 3DHI processes., • Leverage data analytics to drive product yield and reliability optimization., • Own entire product life cycle from bring up, performance/yield/reliability optimization, to customer qualification., • Collaborate with customers to understand and resolve field failures., • Product Engineer I: Bachelor's degree in Electrical Engineering, Semiconductor Physics, Computer Science, Materials Science or relevant field., • Product Engineer II: Bachelor's degree in Electrical Engineering, Semiconductor Physics, Computer Science, Materials Science, and a minimum of three years of relevant industry experience., • Senior Product Engineer: Bachelor's degree in Electrical Engineering, Semiconductor Physics, or Materials Science, and a minimum of ten years of relevant industry experience., • Strong understanding of semiconductor device physics and mixed signal IC behaviors., • Proficient programming skills in languages such as Python, MATLAB, C/C++, or Perl... for data analysis, and automation., • Strong communication and teamwork skills, with the ability to collaborate effectively with cross-functional teams., • Excellent analytical and problem-solving skills, as well as attention to detail., • Ability to thrive in a fast-paced environment and manage multiple projects simultaneously., • (Eng II or Senior): Prior experience in semiconductor design, product engineering, process Integration/manufacturing, Test, or packaging required. Relevant education and/or industry experience may be substituted as appropriate. • Master's degree or PhD in semiconductor engineering fields such as Electrical Engineering, Materials Science, Semiconductor Physics or other relevant disciplines., • Experience or Interest in (for entry level) at least one of the following areas: IC/Micro-system Design, Product Validation, Test, Process or wafer fab Integration, Semiconductor Packaging manufacturing, Thermal/stress optimization, and/or quality assurance, ATE and/or Bench validation of IC's or process test structures, Semiconductor Failure analysis. (SEM/CSAM experience...), Materials packaging/stress/strain evaluations and process controls, Data analytics using scripting/programming putting results into tables/graphs/reports. (JMP, Power BI, Excel...), BIST definition and/or validation. Design & TEST BKM, and Apps engineering / Micro-system Product definition and requirements., • Experience in a startup or research and development (R&D) environment. TIE Pays Industry Competitive Salaries • Work is performed on-site in a scientific research environment and prototyping facility with dynamic work conditions collaborating simultaneously with many partners/customers in parallel., • Work outside standard office hours could be required on an occasional basis during peak periods and special events., • Resume/CV, • 3 work references with their contact information; at least one reference should be from a supervisor, • Letter of interest Important for applicants who are NOT current university employees or contingent workers: You will be prompted to submit your resume in the first step of the online job application process. Then, any additional Required Materials will be uploaded in the My Experience section; you can multi-select the additional files or click the Upload button for each file. Before submitting your online job application, ensure thatALLRequired Materials have been uploaded. Once your job application has been submitted, you cannot make changes. Important for Current university employees and contingent workers: As a current university employee or contingent worker, you MUST apply within Workday by searching for Find Jobs. Before you apply though, log-in to Workday, navigate to your Worker Profile, click the Career link in the left hand navigation menu and then update the sections in your Professional Profile. This information will be pulled in to your application. The application is one page and you will need to click the Upload button multiple times in order to attach your Resume, References and any additional Required Materials noted above. Employment Eligibility: Regular staff who have been employed in their current position for the last six continuous months are eligible for openings being recruited for through University-Wide or Open Recruiting, to include both promotional opportunities and lateral transfers. Staff who are promotion/transfer eligible may apply for positions without supervisor approval. Retirement Plan Eligibility: The retirement plan for this position is Teacher Retirement System of Texas (TRS), subject to the position being at least 20 hours per week and at least 135 days in length. Background Checks: A criminal history background check will be required for finalist(s) under consideration for this position. Equal Opportunity Employer: The University of Texas at Austin, as an ___,complies with all applicable federal and state laws regarding nondiscrimination and affirmative action. The University is committed to a policy of equal opportunity for all persons and does not discriminate on the basis of race, color, national origin, age, marital status, sex, sexual orientation, gender identity, gender expression, disability, religion, or veteran status in employment, educational programs and activities, and admissions. Pay Transparency: The University of Texas at Austin will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Employment Eligibility Verification: If hired, you will be required to complete the federal Employment Eligibility Verification I-9 form. You will be required to present acceptable and original ___ to prove your identity and authorization to work in the United States. Documents need to be presented no later than the third day of employment. Failure to do so will result in loss of employment at the university. E-Verify: The University of Texas at Austin use E-Verify to check the work authorization of all new hires effective May 2015. The university's company ID number for purposes of E-Verify is 854197. For more information about E-Verify, please see the following: • ___ [PDF], • ___ [PDF], • ___ [PDF] Compliance: Employees may be required to report violations of law under Title IX and the Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act (Clery Act). If this position is identified a Campus Security Authority (Clery Act), you will be notified and provided resources for reporting. Responsible employees under Title IX are defined and outlined in ___. The Clery Act requires all prospective employees be notified of the availability of the Annual Security and Fire Safety report. You may ___ or obtain a copy at University Compliance Services, 1616 Guadalupe Street, UTA 2.206, Austin, Texas 78701.

Job Posting Title: Senior Software Engineer, Texas Institute for Electronics Hiring Department: Texas Institute for Electronics Position Open To: All Applicants Weekly Scheduled Hours: 40 FLSA Status: To Be Determined at Offer Earliest Start Date: Ongoing Position Duration: Expected to Continue Location: AUSTIN, TX Job Details: About Us The___is a University of Texas at Austin-supported semiconductor consortium of state and local government, preeminent defense electronics and semiconductor companies, national labs and nationally recognized academic institutions. Our mission is to develop and execute a state-of-the-art 3D Heterogenous Integration manufacturing technology roadmap, and to provide critical pilot manufacturing capabilities to address national security needs and catalyze domestic economic growth. Join the Texas Institute for Electronics (TIE) and help us push the boundaries in critical semiconductor domains, including advanced packaging, with the aim of reestablishing U.S. prominence in semiconductor manufacturing. With over $1 billion in funding from the US DoD and the state of Texas, we're at the forefront of creating cutting-edge semiconductor manufacturing equipment and processes that will set the course for future advancements in semiconductor logic, memory, heterogeneous integration, chip cooling and more. Situated in the heart of Austin - named "America's Coolest City" by Expedia and "The Best Place to Live in the U.S." by U.S. News and World Report - the Texas Institute for Electronics embodies the city's innovative spirit. UT Austin, recognized by Forbes as one of ___, provides outstanding ___ and ___ packages that include: • Competitive health benefits (employee premiums covered at 100%, family premiums at 50%), • Voluntary Vision, Dental, Life, and Disability insurance options, • Generous paid vacation, sick time, and holidays, • Teachers Retirement System of Texas, a defined benefit retirement plan, with 8.25% employer matching funds, • Additional Voluntary Retirement Programs: Tax Sheltered Annuity 403(b) and a Deferred Compensation program 457(b), • Flexible spending account options for medical and childcare expenses, • Robust free training access through LinkedIn Learning plus professional conference opportunities, • Tuition assistance, • Expansive employee discount program including athletic tickets, • Free access to UT Austin's libraries and museums with staff ID card, • Free rides on all UT Shuttle and Austin CapMetro buses with staff ID card, • For more details, please see ___ and ___ and ___ Must be eligible to work in the United States on a full-time basis for any employer without sponsorship. The Senior Software Engineer will lead and contribute to software and controls development for advanced semiconductor manufacturing equipment and processes. This role emphasizes innovation in areas such as logic, memory, heterogeneous integration, chip cooling, and image processing technologies. • Lead software development for novel semiconductor manufacturing equipment, including control systems and automation software, • Design and implement software for image processing and computer vision applications in semiconductor inspection and metrology, • Collaborate with cross-functional teams to integrate hardware and software subsystems, • Develop and maintain software requirements, architecture, and documentation, • Support procurement and evaluation of equipment sub-systems, • Participate in research and development activities to advance semiconductor manufacturing capabilities, • Other related functions as assigned, • Bachelor's degree in Computer Science, Electrical Engineering, or a related discipline, • Minimum of 5 years of experience in software engineering or related fields, • Proficiency in programming languages such as C, C++, Python, and MATLAB, • Experience with control and simulation tools such as Simulink, • Strong understanding of software architecture, object-oriented programming, build systems, and version control, • Demonstrated experience with software requirements and specifications, • Hands-on experience with image processing or computer vision algorithms and tools, • Excellent written and verbal communication skills, • Master's degree or higher in a relevant technical field, • Experience in research or start-up environments, • Prior experience in software development for hardware control and instrumentation, • Experience with image processing libraries (e.g., OpenCV, MATLAB Image Processing Toolbox), • Familiarity with machine vision systems used in semiconductor or high-tech manufacturing, • Experience developing real-time or embedded software systems TIE Pays Industry-Competitive Salaries • Work is performed on-site in a scientific research environment, with dynamic work conditions and frequent interruptions., • May work around standard office conditions, • Repetitive use of a keyboard at a workstation, • Use of manual dexterity (ex: using a mouse), • Monday - Friday, flexible between 7am and 6pm, • Work outside standard office hours could be required on an occasional basis during peak periods and special events., • Resume/CV, • 3 work references with their contact information; at least one reference should be from a supervisor, • Letter of interest (optional) Importantfor applicants who are NOT current university employees or contingent workers:You will be prompted to submit your resume the first time you apply, then you will be provided an option to upload a new Resume for subsequent applications. Any additional Required Materials (letter of interest, references, etc.) will be uploaded in the Application Questions section; you will be able to multi-select additional files. Before submitting your online job application, ensure thatALLRequired Materials have been uploaded. Once your job application has been submitted, you cannot make changes. Important for Current university employees and contingent workers:As a current university employee or contingent worker, you MUST apply within Workday by searching for Find UT Jobs. If you are a current University employee, log-in to Workday, navigate to your Worker Profile, click the Career link in the left hand navigation menu and then update the sections in your Professional Profile before you apply. This information will be pulled in to your application. The application is one page and you will be prompted to upload your resume. In addition, you must respond to the application questionspresented to upload any additional Required Materials (letter of interest, references, etc.) that were noted above. Employment Eligibility: Regular staff who have been employed in their current position for the last six continuous months are eligible for openings being recruited for through University-Wide or Open Recruiting, to include both promotional opportunities and lateral transfers. Staff who are promotion/transfer eligible may apply for positions without supervisor approval. Retirement Plan Eligibility: The retirement plan for this position is Teacher Retirement System of Texas (TRS), subject to the position being at least 20 hours per week and at least 135 days in length. This position has the option to elect the Optional Retirement Program (ORP) instead of TRS, subject to the position being 40 hours per week and at least 135 days in length. Background Checks: A criminal history background check will be required for finalist(s) under consideration for this position. Equal Opportunity Employer: The University of Texas at Austin, as an ___,complies with all applicable federal and state laws regarding nondiscrimination and affirmative action. The University is committed to a policy of equal opportunity for all persons and does not discriminate on the basis of race, color, national origin, age, marital status, sex, sexual orientation, gender identity, gender expression, disability, religion, or veteran status in employment, educational programs and activities, and admissions. Pay Transparency: The University of Texas at Austin will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Employment Eligibility Verification: If hired, you will be required to complete the federal Employment Eligibility Verification I-9 form. You will be required to present acceptable and original ___ to prove your identity and authorization to work in the United States. Documents need to be presented no later than the third day of employment. Failure to do so will result in loss of employment at the university. E-Verify: The University of Texas at Austin use E-Verify to check the work authorization of all new hires effective May 2015. The university's company ID number for purposes of E-Verify is 854197. For more information about E-Verify, please see the following: • ___ [PDF], • ___ [PDF], • ___ [PDF] Compliance: Employees may be required to report violations of law under Title IX and the Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act (Clery Act). If this position is identified a Campus Security Authority (Clery Act), you will be notified and provided resources for reporting. Responsible employees under Title IX are defined and outlined in ___. The Clery Act requires all prospective employees be notified of the availability of the Annual Security and Fire Safety report. You may ___ or obtain a copy at University Compliance Services, 1616 Guadalupe Street, UTA 2.206, Austin, Texas 78701.

Job Posting Title: UT Health Austin Facilities Professionals Talent Pool Hiring Department: Dell Medical School Position Open To: All Applicants Weekly Scheduled Hours: 40 FLSA Status: To Be Determined at Offer Earliest Start Date: Ongoing Position Duration: Expected to Continue Location: AUSTIN, TX Job Details: We're The University of Texas at Austin, and we're building the future of healthcare. Together with MD Anderson Cancer Center, we're creating a $2.5B+ medical district-home to two state-of-the-art hospitals and a vision for what healthcare should be: connected, compassionate, and deeply human. This is more than a construction project. It's a once-in-a-generation opportunity to design and operate the most advanced academic medical center infrastructure the world has ever seen. Smart buildings. Seamless systems. Sustainable operations. All driven by people like you. You're a Facilities pro who doesn't just keep things running-you elevate them. You thrive in complex environments. You're curious about how buildings, people, and technology interact. You care about systems that serve a higher purpose, and you want your work to matter. You might be: * A planner or project manager with healthcare experience * A systems or HVAC specialist who knows the power of precise climate * A technician, engineer, or operations lead who thrives on big challenges * Someone who wants to see their work support healing, learning, and research Apply and help us: * Design and operate future-ready hospital infrastructure * Integrate smart tech, automation, and sustainability into the daily flow of care * Build the foundations of next-gen patient experiences * Maintain and evolve the systems that support health, safety, and innovation * Be part of a team where facilities, design, and care delivery come together seamlessly We're actively hiring for current roles-and continuously building our pipeline through 2030. This is your invitation to build something that will outlast all of us, and impact everyone. Be the system behind the care. Be the reason it all works. Join us. Employment Eligibility: Regular staff who have been employed in their current position for the last six continuous months are eligible for openings being recruited for through University-Wide or Open Recruiting, to include both promotional opportunities and lateral transfers. Staff who are promotion/transfer eligible may apply for positions without supervisor approval. Retirement Plan Eligibility: The retirement plan for this position is Teacher Retirement System of Texas (TRS), subject to the position being at least 20 hours per week and at least 135 days in length. Background Checks: A criminal history background check will be required for finalist(s) under consideration for this position. Equal Opportunity Employer: The University of Texas at Austin, as an ___,complies with all applicable federal and state laws regarding nondiscrimination and affirmative action. The University is committed to a policy of equal opportunity for all persons and does not discriminate on the basis of race, color, national origin, age, marital status, sex, sexual orientation, gender identity, gender expression, disability, religion, or veteran status in employment, educational programs and activities, and admissions. Pay Transparency: The University of Texas at Austin will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Employment Eligibility Verification: If hired, you will be required to complete the federal Employment Eligibility Verification I-9 form. You will be required to present acceptable and original ___ to prove your identity and authorization to work in the United States. Documents need to be presented no later than the third day of employment. Failure to do so will result in loss of employment at the university. E-Verify: The University of Texas at Austin use E-Verify to check the work authorization of all new hires effective May 2015. The university's company ID number for purposes of E-Verify is 854197. For more information about E-Verify, please see the following: • ___ [PDF], • ___ [PDF], • ___ [PDF] Compliance: Employees may be required to report violations of law under Title IX and the Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act (Clery Act). If this position is identified a Campus Security Authority (Clery Act), you will be notified and provided resources for reporting. Responsible employees under Title IX are defined and outlined in ___. The Clery Act requires all prospective employees be notified of the availability of the Annual Security and Fire Safety report. You may ___ or obtain a copy at University Compliance Services, 1616 Guadalupe Street, UTA 2.206, Austin, Texas 78701.

Job Posting Title: Stagehand, PTBE Hiring Department: Intercollegiate Athletics Position Open To: All Applicants Weekly Scheduled Hours: 20 FLSA Status: Non-Exempt Earliest Start Date: Immediately Position Duration: Expected to Continue Until Jul 01, 2033 Location: AUSTIN, TX Job Details: Serve as a stagehand and/or high and ground rigger to perform tasks required for the delivery of stage craft services in full-service multi-purpose public assembly facilities. Opportunities to be trained on specific equipment and advancement into skilled roles are available! Specific position and pay rate will be determined based on experience and qualifications of each applicant. • Participate in the setup and tear down of concerts, men's and women's basketball and other events, • Build and disassemble truss, hanging lights, audio arrays, running cable, scenic structures and laying deck, • Maintain and repair stage equipment, including theatrical lighting instruments, sound reinforcement systems, projection equipment, winch systems and curtains, • Operate all stage equipment required for the successful completion of professional entertainment events, private facility uses and maintenance projects, • Design, hang, focus and operate theatrical stage lighting systems. Set-up and operate sound reinforcement systems, projection and communication equipment, • Maintain inventory of expendable supplies (i.e., lamps, color filters, gaffer's tape, etc.), • Establish and maintain effective working relationships with co-workers and other University personnel, • Performs other related duties as required, • Consistently exemplify the core values and quality service standards of Texas Athletics. Always act ethically. Proactively seek guidance when unsure or unclear of a law, rule or policy applicable to you or your department/sport program. Actively participate in assigned education and training programs. Comply with all laws, policies, rules and regulations set forth by the Board of Regents of The University of Texas System, The University of Texas at Austin, NCAA, Conference, or other governing body, including state and federal laws.Annually obtain prior written approval and report all outside activities and outside income. Report knowledge of, or reasonable cause to believe, violation(s) of state or federal laws, policies, rules, or regulations of the University, Conference, or NCAA to IA ARMCS or IA HR.Fully cooperate with any investigation by providing complete and accurate information when requested to do so by Texas Athletics and/or the NCAA and do not influence others in any way during an investigation. In compliance with Title IX of the Education Amendments of 1972 and Texas Education Code Sec. 51.252, this position may be a Non-Confidential Employee as defined by University policies on Sex Discrimination, Sexual Harassment, Sexual Assault, Interpersonal Violence and Stalking. As a Non-Confidential Employee, individuals employed in this position will report incidents of such prohibited conduct to the University's Title IX Coordinator or Deputy Title IX Coordinator as required by applicable law or University policy. An employee who does not report an incident or who makes a false report is subject to termination and may be charged with a criminal offense (Class A or Class B misdemeanor). For more information about employee responsibilities under Title IX, including information about confidential employee reporting exceptions, please visit the Title IX website at ___., • Diploma (High School) or GED, • Advanced level experience in carpentry, electronics, construction or other manual labor., • Ability to collaborate with others and follow instructions., • Extensive knowledge in concert stage rigging for high and ground riggers. Relevant education and experience may be substituted as appropriate. • A completed apprenticeship would be advantageous., • Stagehands: Lift Operators (fork, scissor, boom, etc.) certification. Skills in audio, lighting, video and/or scenic carpentry. Experience as a live performance engineer/programmer., • Rigging: SPRAT/IRATA certification and rope access training. ETCP Certification., • Experience within Texas Intercollegiate Athletics Starting stagehand: $20 per hour + depending on qualifications, certifications, and experience level • Long and varied hours., • Work performed on multiple projects concurrently, under pressure of rigid deadlines and time limitations at all times of the day and night and on weekends and holidays., • High rigger work may be performed on a gridiron one hundred feet above the arena floor., • Physically demanding work including walking for several hours at a time., • Stagehands and riggers must have the ability to lift at least 50 pounds., • Work is offered on an as-needed and sporadic basis., • Work opportunities occur at all times of the day and night and on weekends and holidays. Resume/CV • 3 work references with their contact information; at least one reference should be from a supervisor, • Letter of interest Importantfor applicants who are NOT current university employees or contingent workers:You will be prompted to submit your resume the first time you apply, then you will be provided an option to upload a new Resume for subsequent applications. Any additional Required Materials (letter of interest, references, etc.) will be uploaded in the Application Questions section; you will be able to multi-select additional files. Before submitting your online job application, ensure thatALLRequired Materials have been uploaded. Once your job application has been submitted, you cannot make changes. Important for Current university employees and contingent workers:As a current university employee or contingent worker, you MUST apply within Workday by searching for Find UT Jobs. If you are a current University employee, log-in to Workday, navigate to your Worker Profile, click the Career link in the left hand navigation menu and then update the sections in your Professional Profile before you apply. This information will be pulled in to your application. The application is one page and you will be prompted to upload your resume. In addition, you must respond to the application questionspresented to upload any additional Required Materials (letter of interest, references, etc.) that were noted above. Employment Eligibility: Regular staff who have been employed in their current position for the last six continuous months are eligible for openings being recruited for through University-Wide or Open Recruiting, to include both promotional opportunities and lateral transfers. Staff who are promotion/transfer eligible may apply for positions without supervisor approval. Retirement Plan Eligibility: The retirement plan for this position is Teacher Retirement System of Texas (TRS), subject to the position being at least 20 hours per week and at least 135 days in length. Background Checks: A criminal history background check will be required for finalist(s) under consideration for this position. Equal Opportunity Employer: The University of Texas at Austin, as an ___,complies with all applicable federal and state laws regarding nondiscrimination and affirmative action. The University is committed to a policy of equal opportunity for all persons and does not discriminate on the basis of race, color, national origin, age, marital status, sex, sexual orientation, gender identity, gender expression, disability, religion, or veteran status in employment, educational programs and activities, and admissions. Pay Transparency: The University of Texas at Austin will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Employment Eligibility Verification: If hired, you will be required to complete the federal Employment Eligibility Verification I-9 form. You will be required to present acceptable and original ___ to prove your identity and authorization to work in the United States. Documents need to be presented no later than the third day of employment. Failure to do so will result in loss of employment at the university. E-Verify: The University of Texas at Austin use E-Verify to check the work authorization of all new hires effective May 2015. The university's company ID number for purposes of E-Verify is 854197. For more information about E-Verify, please see the following: • ___ [PDF], • ___ [PDF], • ___ [PDF], • ___ [PDF] Compliance: Employees may be required to report violations of law under Title IX and the Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act (Clery Act). If this position is identified a Campus Security Authority (Clery Act), you will be notified and provided resources for reporting. Responsible employees under Title IX are defined and outlined in ___. The Clery Act requires all prospective employees be notified of the availability of the Annual Security and Fire Safety report. You may ___ or obtain a copy at University Compliance Services, 1616 Guadalupe Street, UTA 2.206, Austin, Texas 78701.

Job Posting Title: Equipment Engineer, Plasma Etching and Ion Milling, Microelectronics Research Center Hiring Department: Office of the Vice President for Research, Scholarship and Creative Endeavors Position Open To: All Applicants Weekly Scheduled Hours: 40 FLSA Status: Exempt Earliest Start Date: Immediately Position Duration: Expected to Continue Location: AUSTIN, TX Job Details: General Notes The Microelectronics Research Center (MRC) laboratories serve users from both universities and corporations across many different fields: electronics, optics, physics, chemistry and astronomy, as well as chemical, mechanical and petroleum engineering. The MRC is more than a clean room with a comprehensive set of advanced nano-fabrication equipment; it is a community of scientists who work together to build advanced technology products and knowledge. UT Austin offers a competitive benefits package that includes: • 100% employer-paid basic medical coverage, • Retirement contributions, • Paid vacation and sick time, • Paid holidays Please visit our___to learn more about the total benefits offered. Purpose TheEtch Engineerleads development, optimization, and sustainment of advanced etch processes in a shared-user research cleanroom and is responsible for the performance, reliability, and sustainment of dry etching equipment, including plasma etching systems (RIE, ICP), atomic layer etching (ALE) tools, and ion milling systems, in a shareduser cleanroom environment. This role is expected to work as part of a team to ensure optimal tool performance by maintaining tool stability, uptime, safety, and repeatability through calibration, diagnostics, preventive maintenance support, and hardware troubleshooting. The engineer supports advanced microfabrication research and prototyping by ensuring etch tools operate within defined performance specifications and safety requirements, while working closely with process engineers, technicians, vendors, and users for recipe development, experimental design, data analysis, user training, and equipment diagnostics. Responsibilities Equipment Performance and Sustainment * Maintain and optimize the performance and availability of plasma etching, ALE, and ion milling tools to meet facility uptime and capability targets. * Troubleshoot process deviations and tool-related issues using structured root cause analysis. * Monitor and control key equipment performance metrics, including plasma stability, RF power delivery, pressure control, gas flow accuracy, temperature control, and endpoint system performance. * Perform routine equipment calibration, matching, and performance verification to ensure repeatable and stable operation. * Perform diagnostic testing and hardware troubleshooting in coordination with maintenance staff and vendors. * Support tool qualification, calibration, acceptance testing, and preventive maintenance activities. Diagnostics, Troubleshooting, and Repair * Diagnose and resolve equipment-related issues impacting etch performance using structured troubleshooting and root cause analysis. * Perform hands-on hardware diagnostics and repairs, including replacement of boards, RF components, sensors, valves, vacuum hardware, and mechanical assemblies. * Coordinate with vendors and service providers on advanced repairs, corrective maintenance, upgrades, and system modifications. * Support planning and execution of preventive maintenance activities to minimize downtime and performance drift. Process Development and Optimization * Assist users to develop, optimize, and document etch processes for a wide range of device structures and materials as needed. * Assist users in designing and executing experiments to push tool and process limits in resolution, sidewall quality, and pattern fidelity. * Assist users in etch optimization through systematic experimentation and modeling. Process Awareness and Metrology Support * Support process engineers and users by ensuring tools are properly configured and capable of meeting process requirements * Utilize metrology data (e.g., SEM, profilometry, ellipsometry, endpoint signals) to validate equipment performance and identify hardware-related trends. * Assist with tool qualification, requalification after maintenance, and acceptance testing for new or upgraded systems. * Analyze etch and metrology data to support process control and reproducibility. * Correlate etch results with up and downstream lithography or deposition outcomes to optimize process results. Safety Systems and Compliance * Oversee equipment-related safety systems associated with toxic and corrosive process gases (e.g., Cl, CF, SF), including gas cabinets, interlocks, exhaust, scrubbers, and leak detection systems. * Ensure etching equipment operates in compliance with institutional, regulatory, and cleanroom safety standards. * Participate in safety reviews, hazard analyses, and emergency response planning related to etch tool operation. Documentation and Operational Readiness * Develop and maintain equipment-focused documentation, including operating procedures, maintenance records, calibration logs, and performance baselines. * Track tool configuration changes, service history, and hardware modifications. * User training related to equipment operation, tool limitations, and safe use practices. * Provide technical consultation to researchers on etch strategy, design rules, and integration considerations. Collaboration and Integration * Work closely with researchers, engineers, technicians, and integration teams to align equipment performance with research and process needs. * Support downstream integration by ensuring etch tools perform consistently for lithography, deposition, and pattern transfer workflows. * Contribute to facility planning for tool upgrades, capacity expansion, and long-term equipment lifecycle management. * Collaborate with other process engineers, technicians, and researchers to support process transfer, yield improvement, and multi-step process integration. * Participate in interdisciplinary projects involving lithography, metrology, etching, and deposition. * Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, Physics, or a related field. * Minimum of 3 years of experience supporting semiconductor or microfabrication equipment, preferably plasma etching, ALE, or ion milling systems. * Strong understanding of etch tool subsystems, including RF power delivery, plasma sources, vacuum systems, gas delivery, temperature control, and motion systems. * Strong understanding of etch chemistry and process physics. * Demonstrated experience with equipment diagnostics, troubleshooting, and component-level repair. * Familiarity with cleanroom operations, vacuum systems, and hazardous gas safety infrastructure. Relevant education and experience may be substituted as appropriate. * Master's degree in Electrical Engineering, Mechanical Engineering, Materials Science, Physics, or a related field. * Experience supporting RIE, ICP, ALE, or ion milling tools in a research, pilot-line, or shared-user cleanroom environment. * Familiarity with etch performance metrics (e.g., stability, repeatability, endpoint behavior) from an equipment performance perspective. * Experience interfacing with vendors for service, upgrades, and performance optimization. * Training or certification in emergency response protocols for hazardous gas incidents. * Exposure to data analysis or scripting tools (e.g., Python) for equipment monitoring or performance trending. * Prior work in a shared-user research facility or academic cleanroom environment. * Demonstrated experience mentoring junior staff in technical or cleanroom environments. $90,000 + depending on qualifications * Uniforms and/or personal protection equipment (furnished) * May work in all weather conditions * May work in extreme temperatures * May work around chemical fumes * May work around standard office conditions * May work around biohazards * May work around chemicals * May work around electrical and mechanical hazards * Use of manual dexterity * Climbing of stairs * Climbing of ladders * Lifting and moving * Occasional weekend, overtime and evening work to meet deadlines * Field work as necessary * Cleanroom Environment * Yellow lighting in Lithography areas * Noisy environment Please mark "yes" on the application for required materials.Failure to attach all additional materials listed may affect candidates being considered for the position. * Resume/CV * 3 work references with their contact information; at least one reference should be from a supervisor. * Letter of interest Importantfor applicants who are NOT current university employees or contingent workers:You will be prompted to submit your resume the first time you apply, then you will be provided an option to upload a new Resume for subsequent applications. Any additional Required Materials (letter of interest, references, etc.) will be uploaded in the Application Questions section; you will be able to multi-select additional files. Before submitting your online job application, ensure thatALLRequired Materials have been uploaded. Once your job application has been submitted, you cannot make changes. Important for Current university employees and contingent workers:As a current university employee or contingent worker, you MUST apply within Workday by searching for Find UT Jobs. If you are a current University employee, log-in to Workday, navigate to your Worker Profile, click the Career link in the left hand navigation menu and then update the sections in your Professional Profile before you apply. This information will be pulled in to your application. The application is one page and you will be prompted to upload your resume. In addition, you must respond to the application questionspresented to upload any additional Required Materials (letter of interest, references, etc.) that were noted above. Employment Eligibility: Regular staff who have been employed in their current position for the last six continuous months are eligible for openings being recruited for through University-Wide or Open Recruiting, to include both promotional opportunities and lateral transfers. Staff who are promotion/transfer eligible may apply for positions without supervisor approval. Retirement Plan Eligibility: The retirement plan for this position is Teacher Retirement System of Texas (TRS), subject to the position being at least 20 hours per week and at least 135 days in length. This position has the option to elect the Optional Retirement Program (ORP) instead of TRS, subject to the position being 40 hours per week and at least 135 days in length. Background Checks: A criminal history background check will be required for finalist(s) under consideration for this position. Equal Opportunity Employer: The University of Texas at Austin, as an ___,complies with all applicable federal and state laws regarding nondiscrimination and affirmative action. The University is committed to a policy of equal opportunity for all persons and does not discriminate on the basis of race, color, national origin, age, marital status, sex, sexual orientation, gender identity, gender expression, disability, religion, or veteran status in employment, educational programs and activities, and admissions. Pay Transparency: The University of Texas at Austin will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Employment Eligibility Verification: If hired, you will be required to complete the federal Employment Eligibility Verification I-9 form. You will be required to present acceptable and original ___ to prove your identity and authorization to work in the United States. Documents need to be presented no later than the third day of employment. Failure to do so will result in loss of employment at the university. E-Verify: The University of Texas at Austin use E-Verify to check the work authorization of all new hires effective May 2015. The university's company ID number for purposes of E-Verify is 854197. For more information about E-Verify, please see the following: • ___ [PDF], • ___ [PDF], • ___ [PDF] Compliance: Employees may be required to report violations of law under Title IX and the Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act (Clery Act). If this position is identified a Campus Security Authority (Clery Act), you will be notified and provided resources for reporting. Responsible employees under Title IX are defined and outlined in ___. The Clery Act requires all prospective employees be notified of the availability of the Annual Security and Fire Safety report. You may ___ or obtain a copy at University Compliance Services, 1616 Guadalupe Street, UTA 2.206, Austin, Texas 78701.

Job Posting Title: Thermal Mechanical Modeling Engineer Hiring Department: Texas Institute for Electronics Position Open To: All Applicants Weekly Scheduled Hours: 40 FLSA Status: To Be Determined at Offer Earliest Start Date: Ongoing Position Duration: Expected to Continue Location: AUSTIN, TX Job Details: About Us The___is a University of Texas at Austin-supported semiconductor consortium of state and local government, preeminent defense electronics and semiconductor companies, national labs and nationally recognized academic institutions. Our mission is to develop and execute a state-of-the-art 3D Heterogenous Integration manufacturing technology roadmap, and to provide critical pilot manufacturing capabilities to address national security needs and catalyze domestic economic growth. Join the Texas Institute for Electronics (TIE) and help us push the boundaries in critical semiconductor domains, including advanced packaging, with the aim of reestablishing U.S. prominence in semiconductor manufacturing. With over $1 billion in funding from the US DoD and the state of Texas, we're at the forefront of creating cutting-edge semiconductor manufacturing equipment and processes that will set the course for future advancements in semiconductor logic, memory, heterogeneous integration, chip cooling and more. Situated in the heart of Austin - named "America's Coolest City" by Expedia and "The Best Place to Live in the U.S." by U.S. News and World Report - the Texas Institute for Electronics embodies the city's innovative spirit. UT Austin, recognized by Forbes as one of ___, provides outstanding ___ and ___ packages that include: • Competitive health benefits (employee premiums covered at 100%, family premiums at 50%), • Voluntary Vision, Dental, Life, and Disability insurance options, • Generous paid vacation, sick time, and holidays, • Teachers Retirement System of Texas, a defined benefit retirement plan, with 8.25% employer matching funds, • Additional Voluntary Retirement Programs: Tax Sheltered Annuity 403(b) and a Deferred Compensation program 457(b), • Flexible spending account options for medical and childcare expenses, • Robust free training access through LinkedIn Learning plus professional conference opportunities, • Tuition assistance, • Expansive employee discount program including athletic tickets, • Free access to UT Austin's libraries and museums with staff ID card, • Free rides on all UT Shuttle and Austin CapMetro buses with staff ID card, • For more details, please see ___ and ___ and ___ Must be eligible to work in the United States on a full-time basis for any employer without sponsorship. This role is to lead and execute comprehensive thermal and mechanical simulations for advanced 2.5D/3.0D heterogeneous integration and multi-material packages. The position will also collaborate with EDA vendors, OSATs, and foundries, and stay current with next-gen interface standards to guide technical strategy and mentor junior engineers. • Own and execute hands-on semiconductor package mechanical and thermal simulations for advanced 2.5D/3.0D heterogeneous integration and multi-material packages., • Perform modeling, extraction, and verification of high-speed interconnects, power delivery networks, thermal management, and mechanical stress across chiplets and advanced substrates., • Build and validate comprehensive ADK/PDK models (electrical, EM, thermal, mechanical) that accurately represent package-level behavior and enable system-level co-design., • Run end-to-end simulation workflows including thermal/structural reliability checks, and co-simulation across domains., • Collaborate directly with EDA vendors (Cadence, Ansys, Synopsys, Siemens, Keysight, etc.), OSATs, and foundries to develop, test, and refine package simulation flows., • Generate user guides, reference flows, scripts, and automation that make SI/PI/multiphysics enablement repeatable and accessible to design teams., • Stay current with next-gen interface standards (PCIe Gen6/7, CXL, UCIe, UALink, SerDes, HBM) and incorporate their requirements into package design methodologies., • Guide technical strategy for SI/PI flows, mentor junior engineers, and represent TIE in working groups, customer design reviews, and industry forums., • Other related functions as assigned., • BS in Electrical Engineering, Computer Engineering, Applied Physics, or related discipline., • 3 or more years of direct, hands-on experience in multiphysics simulations for advanced packaging, 2.5D/3DIC, or heterogeneous integration platforms., • Strong expertise with EDA/EM/multiphysics tools: Ansys HFSS/SIwave, Cadence Sigrity/Clarity, Synopsys RaptorX, Siemens HyperLynx, Keysight ADS, COMSOL, CST Studio., • Proven ability to extract/package-level models (dielectric/thermal constants, warpage/stress data) and integrate them into design enablement flows., • Hands-on scripting/automation skills (Python, Tcl, SKILL, etc.) to streamline simulation flows., • You're energized by ambiguity, act with urgency, and take personal ownership for outcomes. You make things happen., • Execution mindset. You have demonstrated experience working in a hands-on role driving progress across multiple initiatives without layers of management., • Location. Austin, Texas is required for close collaboration with our engineering teams and partners., • MS or PhD in Electrical Engineering, Applied Physics, or related discipline., • 5 or more years of direct, hands-on experience in multiphysics simulations for advanced packaging, 2.5D/3DIC, or heterogeneous integration platforms., • Deep experience with multi-material packages (Si, glass, organics, Cu, RDL, TSV, hybrid bonding, etc.)., • Expertise in system-level co-simulation spanning electrical, thermal, and mechanical domains for high-power/high-bandwidth-density packages., • Familiarity with industry standards (IEEE, JEDEC, OIF, UCIe, 3Dblox, JEP30) and experience contributing to working groups., • Background in high-speed interconnect modeling and compliance testing for PCIe, CXL, UCIe, SerDes, HBM, or similar standards., • Demonstrated experience creating and validating PDK/ADK simulation collateral spanning thermal, and mechanical domains., • Track record of technical publications, patents, or open-source contributions in SI/PI/multiphysics simulation and design enablement. TIE Pays Industry Competitive Salaries • Uniforms and/or personal protection equipment (furnished), • May work in all weather conditions, • May work in extreme temperatures, • May work around chemical fumes, • May work around standard office conditions, • May work around biohazards, • May work around chemicals, • May work around electrical and mechanical hazards, • Repetitive use of a keyboard at a workstation, • Use of manual dexterity (ex: using a mouse), • Climbing of stairs, • Climbing of ladders, • Lifting and moving 30 pounds, • Monday - Friday, • Occasional nights/weekends required, • Resume/CV, • 3 work references with their contact information; at least one reference should be from a supervisor, • Letter of interest Importantfor applicants who are NOT current university employees or contingent workers:You will be prompted to submit your resume the first time you apply, then you will be provided an option to upload a new Resume for subsequent applications. Any additional Required Materials (letter of interest, references, etc.) will be uploaded in the Application Questions section; you will be able to multi-select additional files. Before submitting your online job application, ensure thatALLRequired Materials have been uploaded. Once your job application has been submitted, you cannot make changes. Important for Current university employees and contingent workers:As a current university employee or contingent worker, you MUST apply within Workday by searching for Find UT Jobs. If you are a current University employee, log-in to Workday, navigate to your Worker Profile, click the Career link in the left hand navigation menu and then update the sections in your Professional Profile before you apply. This information will be pulled in to your application. The application is one page and you will be prompted to upload your resume. In addition, you must respond to the application questionspresented to upload any additional Required Materials (letter of interest, references, etc.) that were noted above. Employment Eligibility: Regular staff who have been employed in their current position for the last six continuous months are eligible for openings being recruited for through University-Wide or Open Recruiting, to include both promotional opportunities and lateral transfers. Staff who are promotion/transfer eligible may apply for positions without supervisor approval. Retirement Plan Eligibility: The retirement plan for this position is Teacher Retirement System of Texas (TRS), subject to the position being at least 20 hours per week and at least 135 days in length. This position has the option to elect the Optional Retirement Program (ORP) instead of TRS, subject to the position being 40 hours per week and at least 135 days in length. Background Checks: A criminal history background check will be required for finalist(s) under consideration for this position. Equal Opportunity Employer: The University of Texas at Austin, as an ___,complies with all applicable federal and state laws regarding nondiscrimination and affirmative action. The University is committed to a policy of equal opportunity for all persons and does not discriminate on the basis of race, color, national origin, age, marital status, sex, sexual orientation, gender identity, gender expression, disability, religion, or veteran status in employment, educational programs and activities, and admissions. Pay Transparency: The University of Texas at Austin will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Employment Eligibility Verification: If hired, you will be required to complete the federal Employment Eligibility Verification I-9 form. You will be required to present acceptable and original ___ to prove your identity and authorization to work in the United States. Documents need to be presented no later than the third day of employment. Failure to do so will result in loss of employment at the university. E-Verify: The University of Texas at Austin use E-Verify to check the work authorization of all new hires effective May 2015. The university's company ID number for purposes of E-Verify is 854197. For more information about E-Verify, please see the following: • ___ [PDF], • ___ [PDF], • ___ [PDF] Compliance: Employees may be required to report violations of law under Title IX and the Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act (Clery Act). If this position is identified a Campus Security Authority (Clery Act), you will be notified and provided resources for reporting. Responsible employees under Title IX are defined and outlined in ___. The Clery Act requires all prospective employees be notified of the availability of the Annual Security and Fire Safety report. You may ___ or obtain a copy at University Compliance Services, 1616 Guadalupe Street, UTA 2.206, Austin, Texas 78701.

Job Posting Title: Failure Analysis Engineer/Senior Failure Analysis Engineer, Texas Institute for Electronics Hiring Department: Texas Institute for Electronics Position Open To: All Applicants Weekly Scheduled Hours: 40 FLSA Status: To Be Determined at Offer Earliest Start Date: Ongoing Position Duration: Expected to Continue Location: PICKLE RESEARCH CAMPUS Job Details: This position may be filled at a higher level depending on the skills, education, and experience of the candidate. The___is a University of Texas at Austin-supported semiconductor consortium of state and local government, preeminent defense electronics and semiconductor companies, national labs and nationally recognized academic institutions. Our mission is to develop and execute a state-of-the-art 3D Heterogenous Integration manufacturing technology roadmap, and to provide critical pilot manufacturing capabilities to address national security needs and catalyze domestic economic growth. Join the Texas Institute for Electronics (TIE) and help us push the boundaries in critical semiconductor domains, including advanced packaging, with the aim of reestablishing U.S. prominence in semiconductor manufacturing. With over $1 billion in funding from the US DoD and the state of Texas, we'reat the forefront of creating cutting-edge semiconductor manufacturing equipment and processes that will set the course for future advancements in semiconductor logic, memory, heterogeneous integration, chip cooling and more. Situated in the heart of Austin - named "America's Coolest City" by Expedia and "The Best Place to Live in the U.S." by U.S. News and World Report - the Texas Institute for Electronics embodies the city's innovative spirit. UT Austin, recognized by Forbes as one of ___, provides outstanding ___ and ___ packages that include: * Competitive health benefits (employee premiums covered at 100%, family premiums at 50%) * Voluntary Vision, Dental, Life, and Disability insurance options * Generous paid vacation, sick time, and holidays * Teachers Retirement System of Texas, a defined benefit retirement plan, with employer matching funds * Additional Voluntary Retirement Programs: Tax Sheltered Annuity 403(b) and a Deferred Compensation program 457(b) * Flexible spending account options for medical and childcare expenses * Robust free training access through LinkedIn Learning plus professional conference opportunities * Tuition assistance * Expansive employee discount program including athletic tickets * Free access to UT Austin's libraries and museums with staff ID card * Free rides on all UT Shuttle and Austin CapMetro buses with staff ID card * For more details, please see: ___ and ___ We are seeking a highly skilled and motivated failure analysis engineer to join our team. The successful candidate will be responsible for surface characterization analytical tools for detailed characterization of complex 3D semiconductor packages. This role involves working closely with a varied range of customers and an active collaboration across cross-functional teams, including materials, process engineering and design. • Establish and responsible for surface science characterization tools for advanced package failure analysis & characterization., • Direct engagement with the setup of the characterization facility at the Montopolis campus, including planning, procurement, and setup of equipment and infrastructure., • Identify root cause of failures enabling process/recipe optimization and yield improvements in early production., • Stay updated on industry trends, emerging technologies, and advancements in surface characterization analytical metrologies., • Collaborate with external vendors and academic partners on the development of advanced characterization techniques to continuously improve lab capabilities and methodologies., • Lead efforts to document design processes, methodologies, and results through Metrology Capability Reports and establish Best Known Methodologies., • Perform other related functions as assigned., • Research Engineering/Scientist Associate IV: M.S. in Materials Science, Physics, Mechanical Engineering, or a related field with at least four years' of experience with surface science characterization tools., • Research Engineering/Scientist Associate V: M.S. in Materials Science, Physics, Mechanical Engineering, or a related field with at least six years' of experience with surface science characterization tools., • Proven track record of establishing and managing advanced research facilities., • Excellent problem-solving skills and the ability to work independently and collaboratively., • Strong communication skills to effectively interact with customers and team members., • Demonstrated ability to innovate and develop new metrologies., • Ph.D. in Materials Science, Physics, Mechanical Engineering, or a related field., • More than three years' of experience with surface science characterization tools., • Experience working with defense companies and commercial semiconductor firms., • Understanding of semiconductor technologies and wafer-level assembly processes. TIE Pays Industry Competitive Salaries • May work around chemical fumes, • May work around standard office conditions, • May work around chemicals, • May work around electrical and mechanical hazards, • Repetitive use of a keyboard at a workstation, • Use of manual dexterity (ex: using a mouse) Resume/CV 3 work references with their contact information; at least one reference should be from a supervisor Letter of interest Importantfor applicants who are NOT current university employees or contingent workers:You will be prompted to submit your resume the first time you apply, then you will be provided an option to upload a new Resume for subsequent applications. Any additional Required Materials (letter of interest, references, etc.) will be uploaded in the Application Questions section; you will be able to multi-select additional files. Before submitting your online job application, ensure thatALLRequired Materials have been uploaded. Once your job application has been submitted, you cannot make changes. Important for Current university employees and contingent workers:As a current university employee or contingent worker, you MUST apply within Workday by searching for Find UT Jobs. If you are a current University employee, log-in to Workday, navigate to your Worker Profile, click the Career link in the left hand navigation menu and then update the sections in your Professional Profile before you apply. This information will be pulled in to your application. The application is one page and you will be prompted to upload your resume. In addition, you must respond to the application questionspresented to upload any additional Required Materials (letter of interest, references, etc.) that were noted above. Employment Eligibility: Regular staff who have been employed in their current position for the last six continuous months are eligible for openings being recruited for through University-Wide or Open Recruiting, to include both promotional opportunities and lateral transfers. Staff who are promotion/transfer eligible may apply for positions without supervisor approval. Retirement Plan Eligibility: The retirement plan for this position is Teacher Retirement System of Texas (TRS), subject to the position being at least 20 hours per week and at least 135 days in length. This position may have the option to elect the Optional Retirement Program (ORP) instead of TRS, dependent upon the job profile you qualify for, and subject to the position being 40 hours per week and at least 135 days in length. Background Checks: A criminal history background check will be required for finalist(s) under consideration for this position. Equal Opportunity Employer: The University of Texas at Austin, as an ___,complies with all applicable federal and state laws regarding nondiscrimination and affirmative action. The University is committed to a policy of equal opportunity for all persons and does not discriminate on the basis of race, color, national origin, age, marital status, sex, sexual orientation, gender identity, gender expression, disability, religion, or veteran status in employment, educational programs and activities, and admissions. Pay Transparency: The University of Texas at Austin will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Employment Eligibility Verification: If hired, you will be required to complete the federal Employment Eligibility Verification I-9 form. You will be required to present acceptable and original ___ to prove your identity and authorization to work in the United States. Documents need to be presented no later than the third day of employment. Failure to do so will result in loss of employment at the university. E-Verify: The University of Texas at Austin use E-Verify to check the work authorization of all new hires effective May 2015. The university's company ID number for purposes of E-Verify is 854197. For more information about E-Verify, please see the following: • ___ [PDF], • ___ [PDF], • ___ [PDF] Compliance: Employees may be required to report violations of law under Title IX and the Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act (Clery Act). If this position is identified a Campus Security Authority (Clery Act), you will be notified and provided resources for reporting. Responsible employees under Title IX are defined and outlined in ___. The Clery Act requires all prospective employees be notified of the availability of the Annual Security and Fire Safety report. You may ___ or obtain a copy at University Compliance Services, 1616 Guadalupe Street, UTA 2.206, Austin, Texas 78701.

ABOUT ENOVIS Enovis Corporation (NYSE: ENOV) is an innovation-driven medical technology growth company dedicated to developing clinically differentiated solutions that generate measurably better patient outcomes and transform workflows. Powered by a culture of continuous improvement, global talent and innovation, the Company's extensive range of products, services and integrated technologies fuels active lifestyles in orthopedics and beyond.For more information about Enovis, please visit ___. What You'll Do As a key member of the Quality Assurance team, you will play an integral part in helping Enovis drive the medical technology industry forward through transforming patient care and creating better patient outcomes. Job Title: Principal Quality Engineer Reports To: Sr Director, Quality Assurance Location: Austin, TX Business Unit Description: Recon, Quality High Level Position Summary: In this senior role, you will leverage your extensive experience in medical device quality to lead projects improving product quality performance, drive cost-efficient quality initiatives, ensure patient safety through compliance, and support new product introductions from a quality standpoint. As a Principal Quality Engineer, you will serve as a key quality authority on cross-functional teams, mentoring others and guiding strategic quality improvements to help Enovis "create better together" in healthcare. Key Responsibilities: • Lead the development and execution of quality and validation master plans, protocols (IQ/OQ/PQ), and reports for equipment, utilities, software, and manufacturing processes., • Ensure validation activities comply with FDA QSR (21 CFR Part 820), ISO 13485, and ISO 14971 standards., • Lead Quality Improvement Projects: Identify and drive continuous improvement initiatives to enhance product quality and reliability (e.g. reducing defect rates, improving yield). Utilize data from audits, non-conformance reports, and process metrics to prioritize and implement improvements, • Drive Cost Efficiency in Quality Processes: Implement Lean Six Sigma methodologies to reduce the cost of poor quality (scrap, rework, warranty claims) and improve operational efficiency, • Ensure Patient Safety and Compliance: Champion rigorous risk management and quality assurance practices to ensure all products meet safety and regulatory requirements, • Support New Product Introduction (NPI): Collaborate with R&D and Operations on new product development teams to integrate quality at every phase. Lead quality planning for new products, including establishing design input requirements for quality, validating new manufacturing processes, and ensuring design transfer is executed with robust controls, • Cross-Functional Collaboration: Work closely with Manufacturing, Engineering, Supply Chain, and Product Development teams to drive quality objectives. Facilitate design and process reviews with cross-functional stakeholders, • Technical Leadership & Mentorship: Serve as a technical lead and mentor for the Quality Engineering team. Provide guidance on complex quality issues and share best practices in areas like root cause analysis, statistical process control, and validation, • Supplier Quality Assurance: Partner with Supplier Quality and Procurement teams to ensure suppliers meet Enovis' quality standards. Assist in developing incoming inspection requirements and supplier quality agreements, and provide quality engineering expertise for supplier process changes or new component qualifications, • Quality System Management: Author and revise quality system documents (procedures, work instructions) related to product quality, ensuring they reflect best practices and regulatory requirements Minimum Basic Qualifications: • Education: Bachelor's degree in engineering or related field (mechanical, biomedical, industrial engineering, or similar) required. An advanced degree (MS in Engineering or MBA) is a plus., • Experience: 10+ years of experience in Quality Engineering, Quality Assurance, or a related engineering role, with significant experience in validation engineering within medical devices or other regulated industries. Demonstrated track record of leading quality or process improvement projects and driving measurable improvements in product quality and compliance., • Quality & Regulatory Knowledge: In-depth knowledge of ISO 13485 quality management systems and FDA Quality System Regulation (21 CFR Part 820) requirements. Strong understanding of risk management (ISO 14971), design control requirements, and validation/verification processes for medical devices. Experience participating in FDA or ISO audits is highly desirable., • Technical Skills: Proficiency with quality engineering tools and methodologies: ability to perform root cause analysis (e.g., 5 Why, fishbone), lead Failure Mode and Effects Analysis (FMEA), and apply statistical techniques (SPC, DOE, Gage R&R) for problem-solving. Experience with validation of processes/equipment and change control in manufacturing. Comfortable using data analysis software and presenting data-driven insights., • Leadership & Communication: Excellent communication skills, both written and verbal, with experience writing clear technical reports/protocols and quality documentation. Proven ability to collaborate across multidisciplinary teams and to influence without direct authority., • Able to project manage multiple initiatives and meet deadlines, demonstrating a high level of organization and "ownership" of quality outcomes. Preferred Qualifications: • Advanced Credentials: Master's degree in Engineering or Quality Management. ASQ Certified Quality Engineer (CQE), Six Sigma Black Belt, or similar professional certification, • Industry Experience: Experience in orthopedic implants or surgical instruments quality engineering is a strong plus (familiarity with biomechanical product standards, sterilization processes, and biocompatibility considerations), • Process Improvement Leadership: Demonstrated leadership of Lean or Six Sigma projects resulting in significant quality, safety, or cost improvements. Participation in cross-site or global quality improvement initiatives. Recognition or awards for quality excellence or continuous improvement contributions would be advantageous., • Software/Tools: Working knowledge of quality system software (e.g., electronic QMS, statistical analysis tools) and general business software. Competency in reading engineering drawings and GD&T; experience with metrology for precision components is beneficial. "Creating better together". It's the Enovis purpose, and it's what drives us and empowers us every day on a global scale. We know that the power to create better - for our customers, our team members, and our shareholders - begins with having the best team, pursuing common goals, operating at the highest levels, and delivering extraordinary outcomes. EQUAL EMPLOYMENT OPPORTUNITY Enovis provides equal employment opportunities based on merit, experience, and other work-related criteria without regard to race, color, ethnicity, religion, national origin, sex, age, pregnancy, disability, veteran status, or any other status protected by applicable law. We also strive to provide reasonable accommodation to employees' beliefs and practices that do not conflict with Enovis policies and applicable law. We value the unique contributions that every employee brings to their role with Enovis.

Job Posting Title: Linux Network Engineering Scientist Associate Hiring Department: Applied Research Laboratories Position Open To: All Applicants Weekly Scheduled Hours: 40 FLSA Status: Exempt Earliest Start Date: Immediately Position Duration: Expected to Continue Location: PICKLE RESEARCH CAMPUS Job Details: Design, develop, test, integrate and document modern TCP/IP Linux network systems in the Advanced Technology Laboratory (ATL). * Design and develop TCP/IP Linux network systems including network, computing, storage and graphics equipment. * Design and configure Linux network systems equipment for high performance and security. * Test, troubleshoot, integrate and profile Linux network systems to meet system requirements. * Document and configuration manage Linux network systems equipment. * Provide local and remote technical support of Linux network system design and implementation. * Other related functions as assigned. * Bachelor's degree in Electrical Engineering, Computer Science, or other related discipline. * Demonstrated knowledge designing, configuring, troubleshooting, testing, validating and documenting TCP/IP model networks. * Knowledge and experience with network stack and principles, addressing, link-layer protocols, routing protocols, transport protocols and network services. * Experience with Linux and network security fundamentals. * Experience with network monitoring, profiling and load balancing. US Citizen. Selected applicant is subject to government security investigation and must meet eligibility requirements for access to classified information at level appropriate to project requirements of the position. * Master's degree in Electrical Engineering or Computer Science with focus on networked systems. * Two or more years of professional experience as a Electrical Engineer or Computer Scientist. * Knowledge and experience with network architecture variations, link aggregation, ECMP, BGP, VLANS and DNS. * Experience with Network Operating System (NOS) and network security devices and configurations. * Network certification. * Eligibility for immediate access to classified information. * Cumulative GPA of 3.0 and above. An agency designated by the federal government handles the investigation as to the requirement for eligibility for access to classified information. Factors considered during this investigation include but are not limited to allegiance to the United States, foreign influence, foreign preference, criminal conduct, security violations, drug involvement, the likelihood of continuation of such conduct, etc. Please mark "yes" on the application question that asks if additional materials are required. Failure to attach all additional materials listed below may result in a delay in application processing. Visit our website (___) for additional information about Applied Research Laboratories. UT Austin offers a competitive benefits package that includes: • 100% employer-paid basic medical coverage, • Retirement contributions, • Paid vacation and sick time $88,500-$120,000+/negotiable depending on qualifications. * Standard office conditions * Repetitive use of a keyboard at a workstation * Use of manual dexterity * Some weekend, evening and holiday work * Possible interstate/intrastate travel * Resume/CV * 3 work references with their contact information; at least one reference should be from a supervisor * Letter of interest * Unofficial college transcripts Importantfor applicants who are NOT current university employees or contingent workers:You will be prompted to submit your resume the first time you apply, then you will be provided an option to upload a new Resume for subsequent applications. Any additional Required Materials (letter of interest, references, etc.) will be uploaded in the Application Questions section; you will be able to multi-select additional files. Before submitting your online job application, ensure thatALLRequired Materials have been uploaded. Once your job application has been submitted, you cannot make changes. Important for Current university employees and contingent workers:As a current university employee or contingent worker, you MUST apply within Workday by searching for Find UT Jobs. If you are a current University employee, log-in to Workday, navigate to your Worker Profile, click the Career link in the left hand navigation menu and then update the sections in your Professional Profile before you apply. This information will be pulled in to your application. The application is one page and you will be prompted to upload your resume. In addition, you must respond to the application questionspresented to upload any additional Required Materials (letter of interest, references, etc.) that were noted above. Employment Eligibility: Regular staff who have been employed in their current position for the last six continuous months are eligible for openings being recruited for through University-Wide or Open Recruiting, to include both promotional opportunities and lateral transfers. Staff who are promotion/transfer eligible may apply for positions without supervisor approval. Retirement Plan Eligibility: The retirement plan for this position is Teacher Retirement System of Texas (TRS), subject to the position being at least 20 hours per week and at least 135 days in length. Background Checks: A criminal history background check will be required for finalist(s) under consideration for this position. Equal Opportunity Employer: The University of Texas at Austin, as an ___,complies with all applicable federal and state laws regarding nondiscrimination and affirmative action. The University is committed to a policy of equal opportunity for all persons and does not discriminate on the basis of race, color, national origin, age, marital status, sex, sexual orientation, gender identity, gender expression, disability, religion, or veteran status in employment, educational programs and activities, and admissions. Pay Transparency: The University of Texas at Austin will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Employment Eligibility Verification: If hired, you will be required to complete the federal Employment Eligibility Verification I-9 form. You will be required to present acceptable and original ___ to prove your identity and authorization to work in the United States. Documents need to be presented no later than the third day of employment. Failure to do so will result in loss of employment at the university. E-Verify: The University of Texas at Austin use E-Verify to check the work authorization of all new hires effective May 2015. The university's company ID number for purposes of E-Verify is 854197. For more information about E-Verify, please see the following: • ___ [PDF], • ___ [PDF], • ___ [PDF] Compliance: Employees may be required to report violations of law under Title IX and the Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act (Clery Act). If this position is identified a Campus Security Authority (Clery Act), you will be notified and provided resources for reporting. Responsible employees under Title IX are defined and outlined in ___. The Clery Act requires all prospective employees be notified of the availability of the Annual Security and Fire Safety report. You may ___ or obtain a copy at University Compliance Services, 1616 Guadalupe Street, UTA 2.206, Austin, Texas 78701.

Job Posting Title: Equipment Engineer, Photo and Ebeam Lithography Development, Microelectronics Research Center Hiring Department: Office of the Vice President for Research, Scholarship and Creative Endeavors Position Open To: All Applicants Weekly Scheduled Hours: 40 FLSA Status: Exempt Earliest Start Date: Immediately Position Duration: Expected to Continue Location: AUSTIN, TX Job Details: General Notes The Microelectronics Research Center (MRC) laboratories serve users from both universities and corporations across many different fields: electronics, optics, physics, chemistry and astronomy, as well as chemical, mechanical and petroleum engineering. The MRC is more than a clean room with a comprehensive set of advanced nano-fabrication equipment; it is a community of scientists who work together to build advanced technology products and knowledge. UT Austin offers a competitive benefits package that includes: * 100% employer-paid basic medical coverage * Retirement contributions * Paid vacation and sick time * Paid holidays Please visit our ___ to learn more about the total benefits offered. Purpose The Lithography Engineer leads development, optimization, and sustainment of advanced lithography processes in a shared-user research cleanroom. The role focuses on direct-write lithography techniques, including photolithography and electron-beam lithography, with strong integration of metrology to achieve precise linewidth control, overlay accuracy, and pattern fidelity. This role is also expected to work as part of a team to ensure optimal tool performance for photolithography and electronbeam lithography systems through calibration, diagnostics, maintenance coordination, and performance monitoring. The engineer supports microfabrication research and prototyping through maintaining tool availability, exposure accuracy, overlay performance, and system stability, while working in close coordination with process engineers, technicians, and users for recipe development, experimental design, data analysis, user training, and equipment diagnostics. Responsibilities * Maintain and optimize the performance of photolithography and electronbeam lithography equipment to meet facility capability and uptime targets. * Troubleshoot process deviations and tool-related issues using structured root cause analysis. * Monitor key tool performance metrics, including exposure stability, overlay accuracy, focus control, beam current stability, and stage performance. * Perform routine performance verification, tool matching, and calibration to ensure consistent and repeatable operation. * Perform diagnostic testing and hardware troubleshooting in coordination with maintenance staff and vendors. * Support tool qualification, calibration, acceptance testing, and preventive maintenance activities. * Diagnose and resolve equipment-related issues impacting lithography performance using systematic troubleshooting and root cause analysis. * Perform diagnostic testing and hands-on hardware troubleshooting, including replacement of boards, sensors, stages, vacuum components, and mechanical assemblies. * Support preventive maintenance planning and execution to minimize downtime and performance drift. * Assist users to develop, optimize, and document photolithography and electron-beam lithography processes for a wide range of device structures and materials as needed. * Assist users in designing and executing experiments to push tool and process limits in resolution, contrast, sidewall quality, and pattern fidelity. * Assist users to address proximity effects, resist behavior, exposure strategies, and process bias through systematic experimentation and modeling. * Utilize lithography-related metrology (e.g., optical inspection, SEM, AFM, overlay and CD measurements) to validate tool performance ensure precise linewidth control and overlay accuracy. * Correlate metrology results with tool settings and hardware condition to identify performance trends and degradation. * Support tool acceptance testing, requalification after maintenance, and periodic performance audits. * Analyze lithography and metrology data to support process control and reproducibility. * Correlate lithographic results with downstream etch or deposition outcomes to optimize pattern transfer. * Develop and maintain equipment-related documentation, including operating procedures, maintenance records, calibration logs, and performance baselines. * Ensure compliance with cleanroom safety standards, equipment interlocks, and chemical handling requirements. * Train and certify users on lithography tools and processes, ensuring safe and effective operation in a shared facility environment. * Provide technical consultation to researchers on lithography strategy, design rules, and integration considerations. * Work closely with researchers, engineers and technicians to align tool performance with process requirements. * Support downstream integration by ensuring lithography tools meet performance needs for etching, deposition, and liftoff processes. * Participate in facility planning related to tool upgrades, replacements, and capability expansion. * Collaborate with other process engineers, technicians, and researchers to support process transfer, yield improvement, and multi-step process integration. * Participate in interdisciplinary projects involving lithography, metrology, etching, and deposition. * Bachelor's degree in Electrical Engineering, Materials Science, Physics, or a related field. * Minimum of 3 years of experience in supporting lithography process development, with emphasis on direct-write techniques. * Strong understanding of lithography tool subsystems, including optics, electron optics, stages, vacuum systems, motion control, and electronics. * Strong understanding of lithographic resolution limits, proximity effects, overlay control, and resist chemistry. * Experience preparing and converting GDS or equivalent layout files for lithography tools. * Demonstrated experience with equipment diagnostics, troubleshooting, and component-level repair. * Familiarity with cleanroom operations, safety protocols, and vacuum-based systems. Relevant education and experience may be substituted as appropriate. * Master's degree in Electrical Engineering, Materials Science, Physics, or a related field. * Experience supporting photolithography steppers, mask aligners, or electronbeam lithography systems in a research or pilot-line environment. * Familiarity with overlay and CD performance metrics and their dependence on tool hardware and calibration. * Experience interfacing with vendors for service, upgrades, and tool performance optimization. * Exposure to data analysis or scripting (e.g., Python) for tool monitoring, performance trending, or log analysis. * Prior experience in a shareduser academic or national lab cleanroom environment. * Experience with multi-layer alignment strategies and advanced registration techniques. * Exposure to optical CD metrology, spectroscopic ellipsometry, or related thin-film characterization methods. * Proficiency in Python or similar scripting languages for data analysis, automation, or metrology workflows. * Prior work in a shared-user research facility or academic cleanroom environment. $90,000 + depending on qualifications * Uniforms and/or personal protection equipment (furnished) * May work in all weather conditions * May work in extreme temperatures * May work around chemical fumes * May work around standard office conditions * May work around biohazards * May work around chemicals * May work around electrical and mechanical hazards * Use of manual dexterity * Climbing of stairs * Climbing of ladders * Lifting and moving * Occasional weekend, overtime and evening work to meet deadlines * Field work as necessary * Cleanroom Environment * Yellow lighting in Lithography areas * Noisy environment Please mark "yes" on the application for required materials.Failure to attach all additional materials listed may affect candidates being considered for the position. * Resume/CV * 3 work references with their contact information; at least one reference should be from a supervisor. * Letter of interest Importantfor applicants who are NOT current university employees or contingent workers:You will be prompted to submit your resume the first time you apply, then you will be provided an option to upload a new Resume for subsequent applications. Any additional Required Materials (letter of interest, references, etc.) will be uploaded in the Application Questions section; you will be able to multi-select additional files. Before submitting your online job application, ensure thatALLRequired Materials have been uploaded. Once your job application has been submitted, you cannot make changes. Important for Current university employees and contingent workers:As a current university employee or contingent worker, you MUST apply within Workday by searching for Find UT Jobs. If you are a current University employee, log-in to Workday, navigate to your Worker Profile, click the Career link in the left hand navigation menu and then update the sections in your Professional Profile before you apply. This information will be pulled in to your application. The application is one page and you will be prompted to upload your resume. In addition, you must respond to the application questionspresented to upload any additional Required Materials (letter of interest, references, etc.) that were noted above. Employment Eligibility: Regular staff who have been employed in their current position for the last six continuous months are eligible for openings being recruited for through University-Wide or Open Recruiting, to include both promotional opportunities and lateral transfers. Staff who are promotion/transfer eligible may apply for positions without supervisor approval. Retirement Plan Eligibility: The retirement plan for this position is Teacher Retirement System of Texas (TRS), subject to the position being at least 20 hours per week and at least 135 days in length. This position has the option to elect the Optional Retirement Program (ORP) instead of TRS, subject to the position being 40 hours per week and at least 135 days in length. Background Checks: A criminal history background check will be required for finalist(s) under consideration for this position. Equal Opportunity Employer: The University of Texas at Austin, as an ___,complies with all applicable federal and state laws regarding nondiscrimination and affirmative action. The University is committed to a policy of equal opportunity for all persons and does not discriminate on the basis of race, color, national origin, age, marital status, sex, sexual orientation, gender identity, gender expression, disability, religion, or veteran status in employment, educational programs and activities, and admissions. Pay Transparency: The University of Texas at Austin will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Employment Eligibility Verification: If hired, you will be required to complete the federal Employment Eligibility Verification I-9 form. You will be required to present acceptable and original ___ to prove your identity and authorization to work in the United States. Documents need to be presented no later than the third day of employment. Failure to do so will result in loss of employment at the university. E-Verify: The University of Texas at Austin use E-Verify to check the work authorization of all new hires effective May 2015. The university's company ID number for purposes of E-Verify is 854197. For more information about E-Verify, please see the following: • ___ [PDF], • ___ [PDF], • ___ [PDF] Compliance: Employees may be required to report violations of law under Title IX and the Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act (Clery Act). If this position is identified a Campus Security Authority (Clery Act), you will be notified and provided resources for reporting. Responsible employees under Title IX are defined and outlined in ___. The Clery Act requires all prospective employees be notified of the availability of the Annual Security and Fire Safety report. You may ___ or obtain a copy at University Compliance Services, 1616 Guadalupe Street, UTA 2.206, Austin, Texas 78701.

Job Posting Title: Robotics and Autonomous System Engineering Associate Hiring Department: Applied Research Laboratories Position Open To: All Applicants Weekly Scheduled Hours: 40 FLSA Status: Exempt Earliest Start Date: Immediately Position Duration: Expected to Continue Location: PICKLE RESEARCH CAMPUS Job Details: As a Robotics and Autonomous System Engineer you will design, implement and test algorithms for autonomous decision making on Uncrewed Underwater Vehicles (UUVs) for the Advanced Technology Laboratory (ATL), at ARL. * Identify, research, and develop autonomy algorithms that use sonar data operating in complex environments to avoid obstacles, aid multi-agent decision making and dynamically replan current tasking and sorties. * Design target recognition algorithms for finding objects in the environment and increasing situational awareness. * Conduct data analysis across a range of acoustic systems, identifying anomalies and opportunities for improvement.. * Local in-water testing of generated algorithms, behaviors and capabilities. * Aid field tests for algorithms in ocean, littoral, harbor and riverine environments. * Document work for knowledge transfer, consistency and efficiency. * Travel in support of data collection, system evaluation testing and project meetings. * Other related functions as needed. * Bachelor's degree in Robotics, engineering, Computer Science, math or other applied sciences. * Demonstrated ability related to the development and application of robotics, autonomy or machine learning algorithms. * Demonstrated ability with implementation and testing of data processing algorithms. * Demonstrated ability using object-oriented programming languages. * Demonstrated ability with analysis software packages such as Matlab or Python and general programming languages such as C/C++ or Python. * Familiarity with Unix/Linux operating systems. Applicant must be highly organized, have excellent attention to detail, and possess sound scientific judgment. The position will require effective management of their own time with the ability to plan, coordinate, and execute multiple tasks simultaneously. Regular and punctual attendance in the workplace is required. US Citizen. Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information at the level appropriate to the project requirements of the position. * Advanced degree in Engineering, Math or Applied Sciences with emphasis in autonomous vehicles, robotics, learning systems, data analysis. * Related experience. * Cumulative GPA of 3.0. An agency designated by the federal government handles the investigation as to the requirement for eligibility for access to classified information. Factors considered during this investigation include but are not limited to allegiance to the United States, foreign influence, foreign preference, criminal conduct, security violations, drug involvement, the likelihood of continuation of such conduct, etc. Please mark "yes" on the application question that asks if additional materials are required. Failure to attach all additional materials listed below may result in a delay in application processing. Visit our website (___) for additional information about Applied Research Laboratories. UT Austin offers a competitive benefits package that includes: • 100% employer-paid basic medical coverage, • Retirement contributions, • Paid vacation and sick time $88,500-$120,000+/negotiable depending on qualifications * Standard office conditions * Repetitive use of a keyboard at a workstation * Use of manual dexterity * Some weekend, evening and holiday work * Possible interstate/intrastate travel * Resume/CV * 3 work references with their contact information; at least one reference should be from a supervisor * Letter of interest * Unofficial college transcripts Importantfor applicants who are NOT current university employees or contingent workers:You will be prompted to submit your resume the first time you apply, then you will be provided an option to upload a new Resume for subsequent applications. Any additional Required Materials (letter of interest, references, etc.) will be uploaded in the Application Questions section; you will be able to multi-select additional files. Before submitting your online job application, ensure thatALLRequired Materials have been uploaded. Once your job application has been submitted, you cannot make changes. Important for Current university employees and contingent workers:As a current university employee or contingent worker, you MUST apply within Workday by searching for Find UT Jobs. If you are a current University employee, log-in to Workday, navigate to your Worker Profile, click the Career link in the left hand navigation menu and then update the sections in your Professional Profile before you apply. This information will be pulled in to your application. The application is one page and you will be prompted to upload your resume. In addition, you must respond to the application questionspresented to upload any additional Required Materials (letter of interest, references, etc.) that were noted above. Employment Eligibility: Regular staff who have been employed in their current position for the last six continuous months are eligible for openings being recruited for through University-Wide or Open Recruiting, to include both promotional opportunities and lateral transfers. Staff who are promotion/transfer eligible may apply for positions without supervisor approval. Retirement Plan Eligibility: The retirement plan for this position is Teacher Retirement System of Texas (TRS), subject to the position being at least 20 hours per week and at least 135 days in length. Background Checks: A criminal history background check will be required for finalist(s) under consideration for this position. Equal Opportunity Employer: The University of Texas at Austin, as an ___,complies with all applicable federal and state laws regarding nondiscrimination and affirmative action. The University is committed to a policy of equal opportunity for all persons and does not discriminate on the basis of race, color, national origin, age, marital status, sex, sexual orientation, gender identity, gender expression, disability, religion, or veteran status in employment, educational programs and activities, and admissions. Pay Transparency: The University of Texas at Austin will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Employment Eligibility Verification: If hired, you will be required to complete the federal Employment Eligibility Verification I-9 form. You will be required to present acceptable and original ___ to prove your identity and authorization to work in the United States. Documents need to be presented no later than the third day of employment. Failure to do so will result in loss of employment at the university. E-Verify: The University of Texas at Austin use E-Verify to check the work authorization of all new hires effective May 2015. The university's company ID number for purposes of E-Verify is 854197. For more information about E-Verify, please see the following: • ___ [PDF], • ___ [PDF], • ___ [PDF] Compliance: Employees may be required to report violations of law under Title IX and the Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act (Clery Act). If this position is identified a Campus Security Authority (Clery Act), you will be notified and provided resources for reporting. Responsible employees under Title IX are defined and outlined in ___. The Clery Act requires all prospective employees be notified of the availability of the Annual Security and Fire Safety report. You may ___ or obtain a copy at University Compliance Services, 1616 Guadalupe Street, UTA 2.206, Austin, Texas 78701.

Job Posting Title: CAD/EDA Engineer I, CAD/EDA Engineer II, Senior CAD/EDA Engineer, Texas Institute for Electronics Hiring Department: Texas Institute for Electronics Position Open To: All Applicants Weekly Scheduled Hours: 40 FLSA Status: Exempt Earliest Start Date: Immediately Position Duration: Expected to Continue Location: PICKLE RESEARCH CAMPUS Job Details: The ___ is a public-private partnership of preeminent semiconductor systems and defense electronics companies, national labs, and academic institutions. Our mission is to advance the state-of-the-art in critical semiconductor domains such as advanced packaging, and in the process to help restore U.S. leadership in semiconductor manufacturing. We are developing cutting-edge semiconductor manufacturing equipment and processes that will define future roadmaps of semiconductor logic, memory, heterogenous integration, chip cooling, etc. We are seeking a number of motivated individuals to join our team and help us in achieving the above goals. TIE is part of the ___ at The University of Texas at Austin (UT Austin), a global leader in technology innovation and engineering education for over a century. With 11 undergraduate and 13 graduate programs, over 20 research centers and a faculty community that boasts one of the highest number of National Academy of Engineering members among U.S. universities, Texas Engineering has launched some of the nation's most accomplished leaders and pioneered world-changing solutions in virtually every industry, from space exploration to energy to health care. Situated in the heart of Austin - named "America's Coolest City" by Expedia and "The Best Place to Live in the U.S." by U.S. News and World Report - the Cockrell School embodies the city's innovative spirit. Major companies with Austin campuses, such as Dell, National Instruments, Apple, IBM, Samsung, Google, Tesla, and many others, continue to recruit Cockrell School students at a remarkable rate, launching thousands of successful careers and developing Texas Engineers into industry leaders. At UT Austin, we say "What starts here changes the world." As a member of the university community, you will be part of an organization that is internationally recognized for our academic programs and research. Your work will have meaning and make a difference not only in the lives of our faculty, staff, and students, but also those who are impacted by our first class academic and research programs. UT Austin, recognized by Forbes as one of ___, provides outstanding ___ and ___ packages that include: * Competitive health benefits (employee premiums covered at 100%, family premiums at 50%) * Voluntary Vision, Dental, Life, and Disability insurance options * Generous paid vacation, sick time, and holidays * Teachers Retirement System of Texas, a defined benefit retirement plan, with 7.75% employer matching funds * Additional Voluntary Retirement Programs: Tax Sheltered Annuity 403(b) and a Deferred Compensation program 457(b) * Flexible spending account options for medical and childcare expenses * Robust free training access through LinkedIn Learning plus professional conference opportunities * Tuition assistance * Expansive employee discount program including athletic tickets * Free access to UT Austin's libraries and museums with staff ID card * Free rides on all UT Shuttle and Austin CapMetro buses with staff ID card Multiple vacancies available. This position may be filled at a higher-level title, relative to the experience and qualifications of the selected candidate. Applicants must be authorized to work in the United States on a full-time basis for any employer without sponsorship. Relocation assistance may be available. We are bringing advanced semiconductor 3DHI packaging/manufacturing back to the USA and looking for motivated individuals to join our team. Implement automation and workflows for custom integrated circuit design and 3DHI modeling across the wide range of EDA IC design tools. Develop and maintain automation scripts in Linux environments, as well as Windows applications. Define design flows andprovide user support for TIE's Assembly Design Kits (ADK's), while helping to ensure interoperability with our partner PDK's. Work closely with EDA vendors and our internal Design and Processes engineering teams to develop and define TIE's preferred tool sets that will enable 3DHI system design for our potential customer base and our internal design/modeling teams. Senior positions will help set TIE's overall EDA/Design methodologies and process strategies. • Create and maintain scripts/automation to assure compatibility and integration with wide range of EDA IC design/modeling tools to enable simulation/emulation, physical verification, parasitic extraction, and 3DHI modeling., • Help develop, deploy, and maintain TIE's ADK (Assembly Design Kits)., • Maintain interoperability and compatibility of TIE's design kits with our partner PDK's, our internal PDK's & ADK's, and vendor EDA tool revisions., • Developing innovative physical design place & route methodology and flow solutions to meet current and future design challenges., • Help establish and validate physical design methodologies, flow automation and infrastructure for our internal 3D heterogenous micro-system modeling teams., • Automation of Test structure layouts to help drive next generation processing capabilities across a wide range of materials., • Support TIE's standard cell offerings and drive validation/simulation/emulation capability around those standard cells., • Facilitate and oversee project tapeouts., • Providing technical leadership, mentoring and customer support for our internal design and 3D modeling teams., • CAD/EDA Engineer I: Bachelor's degree in Electrical Engineering, Computer Science or closely related field., • CAD/EDA Engineer II: Bachelor's degree in Electrical Engineering, Computer Science or closely related field, Minimum of three years industry experience., • Senior CAD/EDA Engineer: Bachelor's degree in Electrical Engineering, Computer Science or closely related field, Minimum of ten years industry experience., • Experience in developing and customizing high performance semiconductor IC design, layout, & validation flows using industry-standard EDA tools ( Cadence, Synopsys, Ansys, Siemens...), • Excellent UNIX and scripting programming skills (Perl, Python, TCL or similar languages)., • Experience with software build automation and version control software., • Proficiency in both Linux and Windows environments., • Prior CAD support experience in semiconductor IC design, including oversight of product tapeouts., • Strong teamwork, collaboration, and communication abilities, with the ability to contribute to company-wide consensus on design flows, tools, and methodologies., • Ability to thrive in a fast-paced environment and manage multiple projects simultaneously. Relevant education and/or industry experience may be substituted as appropriate. • Master's or advanced degree in semiconductor engineering fields such as Electrical Engineering, Computer Science, or other relevant disciplines., • Previous experience in setting up and facilitating Design environments and maintaining design kit operability and coordination for cross functional design, modeling, and/or layout teams., • Previous experience integrating PDK and/or ADK's to enable 2.5D or 3D SoC's., • Experience evaluating EDA tool capabilities driving EDA vendors to make tool improvements or enable new functions to meet advanced or unique design requirements., • Experience in a startup or research and development (R&D) environment. TIE Pays Industry Competitive Salaries • Work is performed on-site in a scientific research environment and prototyping facility with dynamic work conditions collaborating simultaneously with many partners/customers in parallel., • Work outside standard office hours could be required on an occasional basis during peak periods and special events., • Resume/CV, • 3 work references with their contact information; at least one reference should be from a supervisor, • Letter of interest Important for applicants who are NOT current university employees or contingent workers: You will be prompted to submit your resume in the first step of the online job application process. Then, any additional Required Materials will be uploaded in the My Experience section; you can multi-select the additional files or click the Upload button for each file. Before submitting your online job application, ensure thatALLRequired Materials have been uploaded. Once your job application has been submitted, you cannot make changes. Important for Current university employees and contingent workers: As a current university employee or contingent worker, you MUST apply within Workday by searching for Find Jobs. Before you apply though, log-in to Workday, navigate to your Worker Profile, click the Career link in the left hand navigation menu and then update the sections in your Professional Profile. This information will be pulled in to your application. The application is one page and you will need to click the Upload button multiple times in order to attach your Resume, References and any additional Required Materials noted above. Employment Eligibility: Regular staff who have been employed in their current position for the last six continuous months are eligible for openings being recruited for through University-Wide or Open Recruiting, to include both promotional opportunities and lateral transfers. Staff who are promotion/transfer eligible may apply for positions without supervisor approval. Retirement Plan Eligibility: The retirement plan for this position is Teacher Retirement System of Texas (TRS), subject to the position being at least 20 hours per week and at least 135 days in length. Background Checks: A criminal history background check will be required for finalist(s) under consideration for this position. Equal Opportunity Employer: The University of Texas at Austin, as an ___,complies with all applicable federal and state laws regarding nondiscrimination and affirmative action. The University is committed to a policy of equal opportunity for all persons and does not discriminate on the basis of race, color, national origin, age, marital status, sex, sexual orientation, gender identity, gender expression, disability, religion, or veteran status in employment, educational programs and activities, and admissions. Pay Transparency: The University of Texas at Austin will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Employment Eligibility Verification: If hired, you will be required to complete the federal Employment Eligibility Verification I-9 form. You will be required to present acceptable and original ___ to prove your identity and authorization to work in the United States. Documents need to be presented no later than the third day of employment. Failure to do so will result in loss of employment at the university. E-Verify: The University of Texas at Austin use E-Verify to check the work authorization of all new hires effective May 2015. The university's company ID number for purposes of E-Verify is 854197. For more information about E-Verify, please see the following: • ___ [PDF], • ___ [PDF], • ___ [PDF] Compliance: Employees may be required to report violations of law under Title IX and the Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act (Clery Act). If this position is identified a Campus Security Authority (Clery Act), you will be notified and provided resources for reporting. Responsible employees under Title IX are defined and outlined in ___. The Clery Act requires all prospective employees be notified of the availability of the Annual Security and Fire Safety report. You may ___ or obtain a copy at University Compliance Services, 1616 Guadalupe Street, UTA 2.206, Austin, Texas 78701.

Job Posting Title: Senior/Principal TCAD Engineer Hiring Department: Texas Institute for Electronics Position Open To: All Applicants Weekly Scheduled Hours: 40 FLSA Status: To Be Determined at Offer Earliest Start Date: Ongoing Position Duration: Expected to Continue Location: AUSTIN, TX Job Details: Texas Institute for Electronics (TIE) is a transformative, well-funded semiconductor foundry venture combining the agility of a startup with the scale of a national initiative. A key part of our mission is to advance the state of the art in 3D heterogeneous integration (3DHI), chiplet-based architectures, and multi-component microsystems- catalyzing breakthroughs across microelectronics, artificial intelligence, quantum computing, high-performance computing, and next-generation healthcare devices. Backed by $1.4 billion in combined funding from DARPA, Texas state initiatives, and strategic partners, we are building foundational capabilities in advanced packaging and integrated design infrastructure to restore U.S. leadership in microelectronics manufacturing. TIE's 3DHI and chiplet integration platforms integrate novel thermal management and advanced interconnect solutions to deliver unprecedented performance and energy efficiency. Operating at the intersection of defense electronics and commercial markets, TIE offers a rare opportunity to reimagine an industry from the ground up and build transformative products with global impact. UT Austin, recognized by Forbes as one of ___, provides outstanding ___ and ___ packages that include: • Competitive health benefits (employee premiums covered at 100%, family premiums at 50%), • Voluntary Vision, Dental, Life, and Disability insurance options, • Generous paid vacation, sick time, and holidays, • Teachers Retirement System of Texas, a defined benefit retirement plan, with 8.25% employer matching funds, • Additional Voluntary Retirement Programs: Tax Sheltered Annuity 403(b) and a Deferred Compensation program 457(b), • Flexible spending account options for medical and childcare expenses, • Robust free training access through LinkedIn Learning plus professional conference opportunities, • Tuition assistance, • Expansive employee discount program including athletic tickets, • Free access to UT Austin's libraries and museums with staff ID card, • Free rides on all UT Shuttle and Austin CapMetro buses with staff ID card, • For more details, please see ___ and ___ and ___ Develop and validate multi-physics, silicon-calibrated TCAD models for 3DHI devices and interfaces to predict performance and reliability. Partners across teams and external vendors co-optimize designs, set modeling best practices, deliver reusable reference flows, and mentor engineers. • Develop and own TCAD modeling frameworks for advanced devices and interfaces relevant to 3DHI, including hybrid bonding contacts, TSVs, BEOL interconnects, and emerging device structures., • Perform multi-physics simulations (electrical, thermal, mechanical, and reliability) to predict performance, variability, and failure mechanisms across stacked, heterogeneous die systems., • Co-optimize devices, interconnect, and packaging designs by working closely with process integration, packaging, and circuit teams to close the loop between fabrication, measurement, and simulation., • Calibrate and validate TCAD models using silicon data from wafer-level test vehicles and process monitors; drive model-to-hardware correlation across corners and stress conditions., • Define simulation methodologies and best practices for 3D device and interface modeling (e.g., contact resistance, current crowding, electromigration, thermo-mechanical stress)., • Engage with foundry, EDA, and materials partners to influence next-generation TCAD tool features and process design enablement for 3D-stacked systems., • Author technical documentation, modeling guidelines, and reference flows to support ecosystem adoption of TIE's device and interface platforms., • Mentor junior engineers and technical staff, setting standards for modeling rigor and engineering judgment across the organization., • Ph.D. or M.S. in Electrical Engineering, Materials Science, Applied Physics, or a closely related field with strong emphasis on device physics and numerical simulation., • 8+ years (Senior) or 12+ years (Principal) of hands-on experience with TCAD for semiconductor devices or interconnects., • Deep understanding of semiconductor device physics (MOSFETs, diodes, contacts) and transport mechanisms relevant to nanoscale and 3D structures., • Proficiency with commercial TCAD tools such as Synopsys Sentaurus, Silvaco Atlas/Victory, or equivalent multi-physics simulation environments., • Experience correlating TCAD models with silicon data and extracting physical parameters from measurements., • Strong background in process integration effects (doping, defects, interfaces, stress, and materials)., • Experience modeling 3D integration features such as hybrid bonding interfaces, TSVs, or wafer-to-wafer/die-to-wafer stacks., • Familiarity with reliability physics (electromigration, TDDB, stress migration, thermal cycling) in advanced interconnects or contacts., • Exposure to advanced materials systems (Cu-Cu bonding, barrier/liner stacks, low-k dielectrics, compound semiconductors)., • Knowledge of compact model extraction and linkage between TCAD and SPICE-level models., • Publication or patent record in semiconductor device modeling, interconnect physics, or advanced packaging., • Strong technical writing and presentation skills for industry and defense-sector collaborations. TIE pays industry-competitive salaries • May work around standard office conditions, • Repetitive use of a keyboard at a workstation, • Use of manual dexterity (ex: using a mouse), • Location: Austin, Texas is preferred for close collaboration with our engineering teams and partners. Hybrid work arrangements may be possible, with travel up to 30-50% as needed. (Any flexible arrangement would be subject to university policies and approval regarding employment laws and regulations.) Monday - Friday • Resume/CV, • 3 work references with their contact information; at least one reference should be from a supervisor Importantfor applicants who are NOT current university employees or contingent workers:You will be prompted to submit your resume the first time you apply, then you will be provided an option to upload a new Resume for subsequent applications. Any additional Required Materials (letter of interest, references, etc.) will be uploaded in the Application Questions section; you will be able to multi-select additional files. Before submitting your online job application, ensure thatALLRequired Materials have been uploaded. Once your job application has been submitted, you cannot make changes. Important for Current university employees and contingent workers:As a current university employee or contingent worker, you MUST apply within Workday by searching for Find UT Jobs. If you are a current University employee, log-in to Workday, navigate to your Worker Profile, click the Career link in the left hand navigation menu and then update the sections in your Professional Profile before you apply. This information will be pulled in to your application. The application is one page and you will be prompted to upload your resume. In addition, you must respond to the application questionspresented to upload any additional Required Materials (letter of interest, references, etc.) that were noted above. Employment Eligibility: Regular staff who have been employed in their current position for the last six continuous months are eligible for openings being recruited for through University-Wide or Open Recruiting, to include both promotional opportunities and lateral transfers. Staff who are promotion/transfer eligible may apply for positions without supervisor approval. Retirement Plan Eligibility: The retirement plan for this position is Teacher Retirement System of Texas (TRS), subject to the position being at least 20 hours per week and at least 135 days in length. This position has the option to elect the Optional Retirement Program (ORP) instead of TRS, subject to the position being 40 hours per week and at least 135 days in length. Background Checks: A criminal history background check will be required for finalist(s) under consideration for this position. Equal Opportunity Employer: The University of Texas at Austin, as an ___,complies with all applicable federal and state laws regarding nondiscrimination and affirmative action. The University is committed to a policy of equal opportunity for all persons and does not discriminate on the basis of race, color, national origin, age, marital status, sex, sexual orientation, gender identity, gender expression, disability, religion, or veteran status in employment, educational programs and activities, and admissions. Pay Transparency: The University of Texas at Austin will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Employment Eligibility Verification: If hired, you will be required to complete the federal Employment Eligibility Verification I-9 form. You will be required to present acceptable and original ___ to prove your identity and authorization to work in the United States. Documents need to be presented no later than the third day of employment. Failure to do so will result in loss of employment at the university. E-Verify: The University of Texas at Austin use E-Verify to check the work authorization of all new hires effective May 2015. The university's company ID number for purposes of E-Verify is 854197. For more information about E-Verify, please see the following: • ___ [PDF], • ___ [PDF], • ___ [PDF] Compliance: Employees may be required to report violations of law under Title IX and the Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act (Clery Act). If this position is identified a Campus Security Authority (Clery Act), you will be notified and provided resources for reporting. Responsible employees under Title IX are defined and outlined in ___. The Clery Act requires all prospective employees be notified of the availability of the Annual Security and Fire Safety report. You may ___ or obtain a copy at University Compliance Services, 1616 Guadalupe Street, UTA 2.206, Austin, Texas 78701.

Job Posting Title: Software Development Engineer Hiring Department: Texas Institute for Electronics Position Open To: All Applicants Weekly Scheduled Hours: 40 FLSA Status: To Be Determined at Offer Earliest Start Date: Ongoing Position Duration: Expected to Continue Location: AUSTIN, TX Job Details: About Us The___is a University of Texas at Austin-supported semiconductor consortium of state and local government, preeminent defense electronics and semiconductor companies, national labs and nationally recognized academic institutions. Our mission is to develop and execute a state-of-the-art 3D Heterogenous Integration manufacturing technology roadmap, and to provide critical pilot manufacturing capabilities to address national security needs and catalyze domestic economic growth. Join the Texas Institute for Electronics (TIE) and help us push the boundaries in critical semiconductor domains, including advanced packaging, with the aim of reestablishing U.S. prominence in semiconductor manufacturing. With over $1 billion in funding from the US DoD and the state of Texas, we're at the forefront of creating cutting-edge semiconductor manufacturing equipment and processes that will set the course for future advancements in semiconductor logic, memory, heterogeneous integration, chip cooling and more. Situated in the heart of Austin - named "America's Coolest City" by Expedia and "The Best Place to Live in the U.S." by U.S. News and World Report - the Texas Institute for Electronics embodies the city's innovative spirit. UT Austin, recognized by Forbes as one of ___, provides outstanding ___ and ___ packages that include: • Competitive health benefits (employee premiums covered at 100%, family premiums at 50%), • Voluntary Vision, Dental, Life, and Disability insurance options, • Generous paid vacation, sick time, and holidays, • Teachers Retirement System of Texas, a defined benefit retirement plan, with 8.25% employer matching funds, • Additional Voluntary Retirement Programs: Tax Sheltered Annuity 403(b) and a Deferred Compensation program 457(b), • Flexible spending account options for medical and childcare expenses, • Robust free training access through LinkedIn Learning plus professional conference opportunities, • Tuition assistance, • Expansive employee discount program including athletic tickets, • Free access to UT Austin's libraries and museums with staff ID card, • Free rides on all UT Shuttle and Austin CapMetro buses with staff ID card, • For more details, please see ___ and ___ and ___ Must be eligible to work in the United States on a full-time basis for any employer without sponsorship. The Software Developer will design, develop, and integrate high-performance software for advanced semiconductor manufacturing equipment. This role focuses on hardware-software integration, motion control, sensor and camera systems, and real-time automation used across multiple equipment systems at the Texas Institute for Electronics (UT Austin). • Develop software for equipment control, automation, and data acquisition, • Implement C++ applications and develop Qt-based user interfaces, • Integrate sensors, cameras, motion stages, and other hardware devices, • Participate in software testing, code reviews, and CI/CD workflows, • Support system setup, hardware troubleshooting, and wiring when needed, • Collaborate with cross-functional engineering teams, • Other related functions as assigned, • Bachelor's degree in Mechatronics, Robotics, Computer Engineering, Computer Science, or a related discipline, • 1-2 years of software development experience, • Strong proficiency in C++ and object-oriented programming, • Experience developing software in Linux environments, • Familiarity with Qt for UI design and visualization, • Experience with sensors, cameras, motion stages, or other hardware interfaces, • Understanding of real-time programming, multi-threading, and concurrency, • Proficiency with Git/GitHub workflows and CI/CD pipelines, • Experience with unit-testing frameworks, • Strong problem-solving abilities and attention to detail, • Experience with hardware setup, cable fabrication, or system integration, • Excellent written and verbal communication skills, • Master's degree in in Mechatronics or Robotics, • Experience with advanced C++ development, including multi-threading, CMake, and Eigen, • Familiarity with GPU-based computing concepts such as CUDA, • Understanding of industrial communication protocols such as Ethernet, USB, Serial, CAN, Modbus, or ADS, • Experience using cloud services such as AWS S3 or EC2, • Experience with unit-testing frameworks such as GoogleTest TIE Pays Industry-Competitive Salaries • Work is performed on-site in a scientific research environment, with dynamic work conditions and frequent interruptions., • May work around standard office conditions, • Repetitive use of a keyboard at a workstation, • Use of manual dexterity (ex: using a mouse) Monday - Friday • Resume/CV, • 3 work references with their contact information; at least one reference should be from a supervisor Importantfor applicants who are NOT current university employees or contingent workers:You will be prompted to submit your resume the first time you apply, then you will be provided an option to upload a new Resume for subsequent applications. Any additional Required Materials (letter of interest, references, etc.) will be uploaded in the Application Questions section; you will be able to multi-select additional files. Before submitting your online job application, ensure thatALLRequired Materials have been uploaded. Once your job application has been submitted, you cannot make changes. Important for Current university employees and contingent workers:As a current university employee or contingent worker, you MUST apply within Workday by searching for Find UT Jobs. If you are a current University employee, log-in to Workday, navigate to your Worker Profile, click the Career link in the left hand navigation menu and then update the sections in your Professional Profile before you apply. This information will be pulled in to your application. The application is one page and you will be prompted to upload your resume. In addition, you must respond to the application questionspresented to upload any additional Required Materials (letter of interest, references, etc.) that were noted above. Employment Eligibility: Regular staff who have been employed in their current position for the last six continuous months are eligible for openings being recruited for through University-Wide or Open Recruiting, to include both promotional opportunities and lateral transfers. Staff who are promotion/transfer eligible may apply for positions without supervisor approval. Retirement Plan Eligibility: The retirement plan for this position is Teacher Retirement System of Texas (TRS), subject to the position being at least 20 hours per week and at least 135 days in length. This position has the option to elect the Optional Retirement Program (ORP) instead of TRS, subject to the position being 40 hours per week and at least 135 days in length. Background Checks: A criminal history background check will be required for finalist(s) under consideration for this position. Equal Opportunity Employer: The University of Texas at Austin, as an ___,complies with all applicable federal and state laws regarding nondiscrimination and affirmative action. The University is committed to a policy of equal opportunity for all persons and does not discriminate on the basis of race, color, national origin, age, marital status, sex, sexual orientation, gender identity, gender expression, disability, religion, or veteran status in employment, educational programs and activities, and admissions. Pay Transparency: The University of Texas at Austin will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Employment Eligibility Verification: If hired, you will be required to complete the federal Employment Eligibility Verification I-9 form. You will be required to present acceptable and original ___ to prove your identity and authorization to work in the United States. Documents need to be presented no later than the third day of employment. Failure to do so will result in loss of employment at the university. E-Verify: The University of Texas at Austin use E-Verify to check the work authorization of all new hires effective May 2015. The university's company ID number for purposes of E-Verify is 854197. For more information about E-Verify, please see the following: • ___ [PDF], • ___ [PDF], • ___ [PDF] Compliance: Employees may be required to report violations of law under Title IX and the Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act (Clery Act). If this position is identified a Campus Security Authority (Clery Act), you will be notified and provided resources for reporting. Responsible employees under Title IX are defined and outlined in ___. The Clery Act requires all prospective employees be notified of the availability of the Annual Security and Fire Safety report. You may ___ or obtain a copy at University Compliance Services, 1616 Guadalupe Street, UTA 2.206, Austin, Texas 78701.

Job Posting Title: Integration Engineer or Senior Integration Engineer, Texas Institute for Electronics Hiring Department: Texas Institute for Electronics Position Open To: All Applicants Weekly Scheduled Hours: 40 FLSA Status: To Be Determined at Offer Earliest Start Date: Ongoing Position Duration: Expected to Continue Location: PICKLE RESEARCH CAMPUS Job Details: This position may be filled at a higher-level title, relative to the experience and qualifications of the selected candidate. The ___ is a public-private partnership of preeminent semiconductor systems and defense electronics companies, national labs, and academic institutions. Our mission is to advance the state-of-the-art in critical semiconductor domains such as advanced packaging, and in the process to help restore U.S. leadership in semiconductor manufacturing. We are developing cutting-edge semiconductor manufacturing equipment and processes that will define future roadmaps of semiconductor logic, memory, heterogenous integration, chip cooling, etc. We are seeking a number of motivated individuals to join our team and help us in achieving the above goals. TIE is part of the ___ at The University of Texas at Austin (UT Austin), a global leader in technology innovation and engineering education for over a century. With 11 undergraduate and 13 graduate programs, over 20 research centers and a faculty community that boasts one of the highest number of National Academy of Engineering members among U.S. universities, Texas Engineering has launched some of the nation's most accomplished leaders and pioneered world-changing solutions in virtually every industry, from space exploration to energy to health care. Situated in the heart of Austin - named "America's Coolest City" by Expedia and "The Best Place to Live in the U.S." by U.S. News and World Report - the Cockrell School embodies the city's innovative spirit. Major companies with Austin campuses, such as Dell, National Instruments, Apple, IBM, Samsung, Google, Tesla, and many others, continue to recruit Cockrell School students at a remarkable rate, launching thousands of successful careers and developing Texas Engineers into industry leaders. At UT Austin, we say "What starts here changes the world." As a member of the university community, you will be part of an organization that is internationally recognized for our academic programs and research. Your work will have meaning and make a difference not only in the lives of our faculty, staff, and students, but also those who are impacted by our first class academic and research programs. UT Austin, recognized by Forbes as one of ___, provides outstanding ___ and ___ packages that include: * Competitive health benefits (employee premiums covered at 100%, family premiums at 50%) * Voluntary Vision, Dental, Life, and Disability insurance options * Generous paid vacation, sick time, and holidays * Teachers Retirement System of Texas, a defined benefit retirement plan, with employer matching funds * Additional Voluntary Retirement Programs: Tax Sheltered Annuity 403(b) and a Deferred Compensation program 457(b) * Flexible spending account options for medical and childcare expenses * Robust free training access through LinkedIn Learning plus professional conference opportunities * Tuition assistance * Expansive employee discount program including athletic tickets * Free access to UT Austin's libraries and museums with staff ID card * Free rides on all UT Shuttle and Austin CapMetro buses with staff ID card The Integration Engineer or Senior Integration Engineer will focus on processing of test and demonstration vehicles in advanced Heterogeneous Integration projects. This role will initially involve toolset installation/qualification and evolve into establishing best known method (BKM) flows, characterizing performance and executing improvements to enhance yield and reliability. • Drive unit process engineers and tool / material vendors towards achieving defined targets for integrated test vehicles., • Develop successful shortloop and full integrated processes to demonstrate various heterogeneous integration prototypes., • Significant hands-on role within the cleanroom is expected, initially with shared ownership of critical unit processes., • Define process window and resolve excursion through structured troubleshooting and investigation of failure modes., • Design and evaluate results of experiments on test vehicles for mechanical / electrical performance and reliability., • Able to work in a team environment, mentor junior engineers / students and communicate effectively., • Bachelor's degree in semiconductor engineering fields such as Electrical Engineering, Chemical Engineering, Materials Science or other relevant disciplines., • Five years of relevant experience to include experience with Cu BEOL interconnects, including hands on experience with copper DD unit processes., • Experience in W2W or D2WHB extremely preferred., • Master's degree or Doctoral degree in semiconductor engineering fields such as Electrical Engineering, Chemical Engineering, Materials Science or other relevant disciplines, • 3 years of experience in semiconductor process engineering., • Experience in W2W or D2WHB extremely preferred., • Working knowledge or experience with 3D ICs including various integration schemes., • Extensive familiarity with standard inline metrology and failure analysis techniques., • Experience with working on test vehicles to establish baseline processes., • Ability to work in a cleanroom for extended periods of time to inspect, oversee and debug processes. This includes the ability to gown to applicable clean room standards., • Experience with analysis and interpretation of BEOL parametric etest and reliability., • Strong data analytical skills (JMP, Python etc.) and communication skills. Relevant education and experience may be substituted as appropriate. • 3 or more years of experience with unit processes in Copper CMP, particle free wet cleans or bonding., • 10 or more years of experience in semiconductor process engineering., • Experience in a startup or research and development (R&D) environment, • Experience with advanced technology nodes., • Experience in test vehicle design, layout, and/or extraction of parametric results. TIE Pays Industry Competitive Salaries • Work is performed on-site in a scientific research environment, with dynamic work conditions and frequent interruptions., • Work is performed in a cleanroom environment, requiring the ability to gown to ISO Class 5 Clean Room standards., • Work outside standard office hours could be required on an occasional basis during peak periods and special events., • Resume/CV, • 3 work references with their contact information; at least one reference should be from a supervisor, • Letter of interest Importantfor applicants who are NOT current university employees or contingent workers:You will be prompted to submit your resume the first time you apply, then you will be provided an option to upload a new Resume for subsequent applications. Any additional Required Materials (letter of interest, references, etc.) will be uploaded in the Application Questions section; you will be able to multi-select additional files. Before submitting your online job application, ensure thatALLRequired Materials have been uploaded. Once your job application has been submitted, you cannot make changes. Important for Current university employees and contingent workers:As a current university employee or contingent worker, you MUST apply within Workday by searching for Find UT Jobs. If you are a current University employee, log-in to Workday, navigate to your Worker Profile, click the Career link in the left hand navigation menu and then update the sections in your Professional Profile before you apply. This information will be pulled in to your application. The application is one page and you will be prompted to upload your resume. In addition, you must respond to the application questionspresented to upload any additional Required Materials (letter of interest, references, etc.) that were noted above. Employment Eligibility: Regular staff who have been employed in their current position for the last six continuous months are eligible for openings being recruited for through University-Wide or Open Recruiting, to include both promotional opportunities and lateral transfers. Staff who are promotion/transfer eligible may apply for positions without supervisor approval. Retirement Plan Eligibility: The retirement plan for this position is Teacher Retirement System of Texas (TRS), subject to the position being at least 20 hours per week and at least 135 days in length. This position may have the option to elect the Optional Retirement Program (ORP) instead of TRS, dependent upon the job profile you qualify for, and subject to the position being 40 hours per week and at least 135 days in length. Background Checks: A criminal history background check will be required for finalist(s) under consideration for this position. Equal Opportunity Employer: The University of Texas at Austin, as an ___,complies with all applicable federal and state laws regarding nondiscrimination and affirmative action. The University is committed to a policy of equal opportunity for all persons and does not discriminate on the basis of race, color, national origin, age, marital status, sex, sexual orientation, gender identity, gender expression, disability, religion, or veteran status in employment, educational programs and activities, and admissions. Pay Transparency: The University of Texas at Austin will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Employment Eligibility Verification: If hired, you will be required to complete the federal Employment Eligibility Verification I-9 form. You will be required to present acceptable and original ___ to prove your identity and authorization to work in the United States. Documents need to be presented no later than the third day of employment. Failure to do so will result in loss of employment at the university. E-Verify: The University of Texas at Austin use E-Verify to check the work authorization of all new hires effective May 2015. The university's company ID number for purposes of E-Verify is 854197. For more information about E-Verify, please see the following: • ___ [PDF], • ___ [PDF], • ___ [PDF] Compliance: Employees may be required to report violations of law under Title IX and the Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act (Clery Act). If this position is identified a Campus Security Authority (Clery Act), you will be notified and provided resources for reporting. Responsible employees under Title IX are defined and outlined in ___. The Clery Act requires all prospective employees be notified of the availability of the Annual Security and Fire Safety report. You may ___ or obtain a copy at University Compliance Services, 1616 Guadalupe Street, UTA 2.206, Austin, Texas 78701.

Job Posting Title: Project Manager IV (PM4) Hiring Department: PDC Position Open To: All Applicants Weekly Scheduled Hours: 40 FLSA Status: To Be Determined at Offer Earliest Start Date: Ongoing Position Duration: Expected to Continue Location: AUSTIN, TX Job Details: The University of Texas at Austin is seeking to hire a senior project manager (PM4) to serve within Planning, Design and Construction (PDC). PM4 will provide professional project management and leadership for major Capital Improvement Program (CIP, > $10M TPC) projects at UT Austin for highly technical, mission critical, and sensitive project types. Position may also support or be assigned minor projects (TPC < $10M). PDC is actively managing more than $5 billion in major projects across the planning, design and construction phases, and this position is critical for the successful delivery of these projects. If you are experienced in project management, design, or construction and want to help transform facilities that engage the university community and advance UT's education, research, and public service missions, we encourage you to apply for rewarding career opportunities in PDC. You'll be working for a university that is internationally recognized for our academic programs and research. Your work will make a difference in the lives of students, staff, and faculty, thereby enhancing the student experience. If you're the type of person that wants to know your work has meaning and impact, you'll like working in our department and for UT Austin. UT Austin provides an outstanding benefits package. For more details, please see: and . Relocation incentive available. Provide professional project management of complex higher education academic, research and healthcare projects across multiple campuses. Project types include new construction, fit-out of shell spaces, renovations, and refurbishment of existing buildings and infrastructure. Manages project team in directing design professionals, collaborating with campus partners, and administering contracts necessary to meet project goals, while maintaining budget, schedule and timely reporting to leadership. * Lead complex projects involving planning, design and execution of major higher education capital projects by providing project leadership, communication, coordination and conflict resolution to ensure project goals are met. May also be responsible for managing select projects as assigned by the Associate Director depending on resource needs. * Responsible for project budget, schedule, and procurement of design and construction services. Assist Project Managers to drive progress of consultants to achieve expected functionality; and recommend alternatives to recover negative float. Facilitate timely decisions by campus representatives and report progress and issues impacting the project goals to stakeholders. Oversee project managers efforts to manage project from initiation through completion of construction. * Advocate with integrity for the campus contract negotiations. Review and approve design and construction contracts, changes, technical service contracts, Guaranteed Maximum Price submittals, bid documents, pay applications, etc.Facilitate UT Austin and UT System approvals as required. * During construction, direct and/or provide support to Project Team, Construction Administrators, and institution staff in management of construction activities and processes. Assist Project Managers in applying UT Austin Capital Planning and Construction project control processes to track progress; for consistency; to mitigate risks; and to assure compliance with Board of Regents Rules' Regulations and applicable State and Federal statutes and regulations. * Stay current in Codes and Regulations applicable to design and construction, including International Building Codes, NFPA 101, TDLR, OSHA, ADA, ASHRAE 90.1, SWPPP, and any special requirements of the building type (e.g., healthcare, research labs, special campus project types, etc.) or the local jurisdictions. * Support UT Austin in pre-project planning activities, including Capital Improvement Plan preparation and Board of Regents and Texas Higher Education Coordinating Board submittals and approval processes. * Participate in or lead process improvement initiatives as assigned by the Assistant Director. * Other related functions as assigned. Collaborate with other UT Austin colleagues to initiate and develop process improvements. • Bachelor's degree in Architecture, Engineering, Construction Management, Construction Science, or related discipline., • 10 or more years of experience providing project management of design and construction activities for renovations and new construction, including institutional or commercial facilities., • 3 or more years of experience providing project management of capital projects with a Total Project Cost of $10M or more., • Working knowledge of contract documents (plans, specifications)., • Experience negotiating construction contracts., • Working knowledge of life safety and building codes including, NFPA 101, IBC, ASHRAE, Texas Accessibility Standards, and the Americans with Disabilities Act, among others., • Experience using Excel, Microsoft Word, and scheduling software such as MS Project., • Excellent communication, collaboration and organizational skills, with an ability to manage multiple simultaneous activities in a varied and complex environment. Relevant education and experience may be substituted as appropriate. • Licensed Architect or Engineer in the State of Texas, or licensure in another state and eligible for reciprocity with the State of Texas, or ability to obtain professional licensure in the State of Texas within two years., • LEED-AP credentials., • Experience managing design and construction for projects in a higher education setting as the owner's representative., • 10 or more years of experience providing project management of major capital projects with a Total Project Cost of $10M or more., • Project Management Professional (PMP) certification, or other similar demonstration of formal project management training. This job requires a class "C" operator's driver's license. The applicant selected must provide a current three year driving record from the current state of residence. If not currently a Texas resident, a Texas driver's license must be obtained within 30 days of becoming a Texas resident. Employees who are required to have a CDL are subject to drug and alcohol testing (pre-employment, post-accident, reasonable suspicion, random, return-to-duty, and follow-up drug and alcohol testing). $132,000 + depending on qualifications • Uniform or PPE, • All weather conditions, • Extreme temperatures, • Occasional chemical fumes, • Standard office, • Keyboard, • Manual dexterity, • Climbing of stairs and ladders, • Electrical/mechanical, • Lifting and moving, • Will be working in an active construction site, • May require some after hours work depending on project needs, • Resume/CV, • 3 work references with their contact information; at least one reference should be from a supervisor, • Letter of interest Importantfor applicants who are NOT current university employees or contingent workers:You will be prompted to submit your resume the first time you apply, then you will be provided an option to upload a new Resume for subsequent applications. Any additional Required Materials (letter of interest, references, etc.) will be uploaded in the Application Questions section; you will be able to multi-select additional files. Before submitting your online job application, ensure thatALLRequired Materials have been uploaded. Once your job application has been submitted, you cannot make changes. Important for Current university employees and contingent workers:As a current university employee or contingent worker, you MUST apply within Workday by searching for Find UT Jobs. If you are a current University employee, log-in to Workday, navigate to your Worker Profile, click the Career link in the left hand navigation menu and then update the sections in your Professional Profile before you apply. This information will be pulled in to your application. The application is one page and you will be prompted to upload your resume. In addition, you must respond to the application questionspresented to upload any additional Required Materials (letter of interest, references, etc.) that were noted above. Employment Eligibility: Regular staff who have been employed in their current position for the last six continuous months are eligible for openings being recruited for through University-Wide or Open Recruiting, to include both promotional opportunities and lateral transfers. Staff who are promotion/transfer eligible may apply for positions without supervisor approval. Retirement Plan Eligibility: The retirement plan for this position is Teacher Retirement System of Texas (TRS), subject to the position being at least 20 hours per week and at least 135 days in length. This position has the option to elect the Optional Retirement Program (ORP) instead of TRS, subject to the position being 40 hours per week and at least 135 days in length. Background Checks: A criminal history background check will be required for finalist(s) under consideration for this position. Equal Opportunity Employer: The University of Texas at Austin, as an ___,complies with all applicable federal and state laws regarding nondiscrimination and affirmative action. The University is committed to a policy of equal opportunity for all persons and does not discriminate on the basis of race, color, national origin, age, marital status, sex, sexual orientation, gender identity, gender expression, disability, religion, or veteran status in employment, educational programs and activities, and admissions. Pay Transparency: The University of Texas at Austin will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Employment Eligibility Verification: If hired, you will be required to complete the federal Employment Eligibility Verification I-9 form. You will be required to present acceptable and original ___ to prove your identity and authorization to work in the United States. Documents need to be presented no later than the third day of employment. Failure to do so will result in loss of employment at the university. E-Verify: The University of Texas at Austin use E-Verify to check the work authorization of all new hires effective May 2015. The university's company ID number for purposes of E-Verify is 854197. For more information about E-Verify, please see the following: • ___ [PDF], • ___ [PDF], • ___ [PDF] Compliance: Employees may be required to report violations of law under Title IX and the Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act (Clery Act). If this position is identified a Campus Security Authority (Clery Act), you will be notified and provided resources for reporting. Responsible employees under Title IX are defined and outlined in ___. The Clery Act requires all prospective employees be notified of the availability of the Annual Security and Fire Safety report. You may ___ or obtain a copy at University Compliance Services, 1616 Guadalupe Street, UTA 2.206, Austin, Texas 78701.

Job Posting Title: Project Manager 4 (PM4) Hiring Department: Planning, Design, and Construction Position Open To: All Applicants Weekly Scheduled Hours: 40 FLSA Status: To Be Determined at Offer Earliest Start Date: Ongoing Position Duration: Expected to Continue Location: AUSTIN, TX Job Details: The University of Texas at Austin is seeking to hire a senior project manager (PM) with medical project management experience for the Planning, Design and Construction Department.PM will provide professional project management and leadership for major Capital Improvement Program (CIP, >$10M TPC) projects at UT Austin for highly technical, mission critical, and sensitive project types.PDC is actively managing a $1.3 billion hospital project, in partnership with the MD Anderson Cancer Center, as well as multiple time-critical enabling projects.This position is critical for the successful delivery of these projects.If you are experienced in project management, design, or construction and want to help transform facilities that engage the university community and advance the delivery of cancer medical services for central Texas, we encourage you to apply for the rewarding career opportunity with PDC. You'll be working for a university that is internationally recognized for our academic programs and research. Your work will make a difference in the lives of students, staff, and faculty, thereby enhancing the student experience.If you're the type of person that wants to know your work has meaning and impact, you'll like working in our department and for UT Austin. UT Austin provides an outstanding benefits package.For more details, please see: and . Relocation incentive available Provide professional management of and leadership for 2-5 project managers on multiple major, complex higher education academic, healthcare and research projects at UT Austin Campuses. Manage and oversee project managers in directing design professionals, campus departmental faculty and staff, and administer contracts necessary to meet project goals while maintaining project budget and schedule and timely reporting to leadership on project status. * Lead complex projects involving planning, design and execution of major higher education capital projects by providing project leadership, communication, coordination and conflict resolution to ensure project goals are met. May also be responsible for managing select projects as assigned by the Associate Director depending on resource needs. * Responsible for project budget, schedule, and procurement of design and construction services. Assist Project Managers to drive progress of consultants to achieve expected functionality; and recommend alternatives to recover negative float. Facilitate timely decisions by campus representatives and report progress and issues impacting the project goals to stakeholders. Oversee project managers efforts to manage project from initiation through completion of construction. * Advocate with integrity for the campus contract negotiations. Review and approve design and construction contracts, changes, technical service contracts, Guaranteed Maximum Price submittals, bid documents, pay applications, etc. Facilitate UT Austin and UT System approvals as required. * During construction, direct and/or provide support to Project Team, Construction Administrators, and institution staff in management of construction activities and processes. Assist Project Managers in applying UT Austin Capital Planning and Construction project control processes to track progress; for consistency; to mitigate risks; and to assure compliance with Board of Regents Rules' Regulations and applicable State and Federal statutes and regulations. * Stay current in Codes and Regulations applicable to design and construction, including International Building Codes, NFPA 101, TDLR, OSHA, ADA, ASHRAE 90.1, SWPPP, and any special requirements of the building type (e.g., healthcare, research labs, special campus project types, etc.) or the local jurisdictions. * Support UT Austin in pre-project planning activities, including Capital Improvement Plan preparation and Board of Regents and Texas Higher Education Coordinating Board submittals and approval processes. * Participate in or lead process improvement initiatives as assigned by the Assistant Director. * Other related functions as assigned. Collaborate with other UT Austin colleagues to initiate and develop process improvements. • Bachelor's degree in Architecture, Engineering, Construction Management, Construction Science, or related discipline., • 10 or more years of experience providing project management of design and construction activities for renovations and new construction, including institutional or commercial facilities., • 3 or more years of experience providing project management of capital projects with a Total Project Cost of $10M or more., • Experience managing design and construction for projects in the medical/healthcare industry as the owner's representative, • Working knowledge of contract documents (plans, specifications)., • Experience negotiating construction contracts., • Working knowledge of life safety and building codes including, NFPA 101, IBC, ASHRAE, Texas Accessibility Standards, and the Americans with Disabilities Act, among others., • Experience using Excel, Microsoft Word, and scheduling software such as MS Project., • Excellent communication, collaboration and organizational skills, with an ability to manage multiple simultaneous activities in a varied and complex environment. Relevant education and experience may be substituted as appropriate. • Licensed Architect or Engineer in the State of Texas, or licensure in another state and eligible for reciprocity with the State of Texas, or ability to obtain professional licensure in the State of Texas within two years., • LEED-AP credentials., • Experience managing design and construction for projects in a higher education setting as the owner's representative., • 10 or more years of experience providing project management of major capital projects with a Total Project Cost of $10M or more., • Project Management Professional (PMP) certification, or other similar demonstration of formal project management training. This job requires a class "C" operator's driver's license. The applicant selected must provide a current three year driving record from the current state of residence. If not currently a Texas resident, a Texas driver's license must be obtained within 30 days of becoming a Texas resident. Employees who are required to have a CDL are subject to drug and alcohol testing (pre-employment, post-accident, reasonable suspicion, random, return-to-duty, and follow-up drug and alcohol testing). $132,000 + depending on qualifications * Uniform or PPE * All weather conditions * Extreme temperatures * Occasional chemical fumes * Standard office * Occasional chemicals * Electrical/mechanical * Keyboard * Manual dexterity * Climbing of stairs and ladders * Lifting and moving * You will be working in an active construction site * 40 hours per week, may require some after hours work depending on project needs. * Resume/CV • 3 work references with their contact information; at least one reference should be from a supervisor, • Letter of interest Importantfor applicants who are NOT current university employees or contingent workers:You will be prompted to submit your resume the first time you apply, then you will be provided an option to upload a new Resume for subsequent applications. Any additional Required Materials (letter of interest, references, etc.) will be uploaded in the Application Questions section; you will be able to multi-select additional files. Before submitting your online job application, ensure thatALLRequired Materials have been uploaded. Once your job application has been submitted, you cannot make changes. Important for Current university employees and contingent workers:As a current university employee or contingent worker, you MUST apply within Workday by searching for Find UT Jobs. If you are a current University employee, log-in to Workday, navigate to your Worker Profile, click the Career link in the left hand navigation menu and then update the sections in your Professional Profile before you apply. This information will be pulled in to your application. The application is one page and you will be prompted to upload your resume. In addition, you must respond to the application questionspresented to upload any additional Required Materials (letter of interest, references, etc.) that were noted above. Employment Eligibility: Regular staff who have been employed in their current position for the last six continuous months are eligible for openings being recruited for through University-Wide or Open Recruiting, to include both promotional opportunities and lateral transfers. Staff who are promotion/transfer eligible may apply for positions without supervisor approval. Retirement Plan Eligibility: The retirement plan for this position is Teacher Retirement System of Texas (TRS), subject to the position being at least 20 hours per week and at least 135 days in length. This position has the option to elect the Optional Retirement Program (ORP) instead of TRS, subject to the position being 40 hours per week and at least 135 days in length. Background Checks: A criminal history background check will be required for finalist(s) under consideration for this position. Equal Opportunity Employer: The University of Texas at Austin, as an ___,complies with all applicable federal and state laws regarding nondiscrimination and affirmative action. The University is committed to a policy of equal opportunity for all persons and does not discriminate on the basis of race, color, national origin, age, marital status, sex, sexual orientation, gender identity, gender expression, disability, religion, or veteran status in employment, educational programs and activities, and admissions. Pay Transparency: The University of Texas at Austin will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Employment Eligibility Verification: If hired, you will be required to complete the federal Employment Eligibility Verification I-9 form. You will be required to present acceptable and original ___ to prove your identity and authorization to work in the United States. Documents need to be presented no later than the third day of employment. Failure to do so will result in loss of employment at the university. E-Verify: The University of Texas at Austin use E-Verify to check the work authorization of all new hires effective May 2015. The university's company ID number for purposes of E-Verify is 854197. For more information about E-Verify, please see the following: • ___ [PDF], • ___ [PDF], • ___ [PDF] Compliance: Employees may be required to report violations of law under Title IX and the Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act (Clery Act). If this position is identified a Campus Security Authority (Clery Act), you will be notified and provided resources for reporting. Responsible employees under Title IX are defined and outlined in ___. The Clery Act requires all prospective employees be notified of the availability of the Annual Security and Fire Safety report. You may ___ or obtain a copy at University Compliance Services, 1616 Guadalupe Street, UTA 2.206, Austin, Texas 78701.

Job Posting Title: Research Engineering/Scientist Associate I, II, or III Hiring Department: Department of Aerospace Engineering and Engineering Mechanics Position Open To: All Applicants Weekly Scheduled Hours: 40 FLSA Status: To Be Determined at Offer Earliest Start Date: Ongoing Position Duration: Expected to Continue Location: PICKLE RESEARCH CAMPUS Job Details: US permanent residency or citizenship is required due to sponsor requirements. About Us The Center for Space Research (___) is an Organized Research Unit of the Cockrell School of Engineering. Our mission is to carry out scientific research from spaceborne platforms, in service to society, while educating all. With over $10 million in annual funding from various federal sponsors, and working on four operating space missions, the CSR team is at the forefront of architecting, operating, and science analysis for space missions. These missions use tracking measurements of orbital motion or the measurements of the force field near the satellite to make inferences about planet Earth. For us, the satellite is the instrument, so that our understanding of the aerospace engineering of the space mission is intimately connected with our scientific data analysis. Our Earth science data products are recognized globally as setting the standard, and are utilized by geoscience investigators worldwide. Our staff and students engage and research the latest data science paradigms together with deep physical insights to carry out "parts-per-billion" discovery. Situated in the heart of Austin - named "America's Coolest City" by Expedia and "The Best Place to Live in the U.S." by U.S. News and World Report - UTCSR embodies UT Austin's pioneering history in spaceflight and discovery from space. Join us and work on the complete life-cycle of space missions, in operation, in implementation, and in formulation phases. CSR employees work with mission teams at national labs and with international partners for the implementation of flight missions and scientific data analysis. For an early career engineer, this job offers an excellent opportunity to learn, to contribute, and to gain a variety of aerospace skills in a collegial, informal environment while visibly making a mark in the profession. Benefits: UT Austin, recognized by Forbes as one of ___, provides outstanding ______ and ___ packages that include: * Competitive health benefits (employee premiums covered at 100%, family premiums at 50%), * Voluntary Vision, Dental, Life, and Disability insurance options, * Generous paid vacation, sick time, and holidays, * Teachers Retirement System of Texas, a defined benefit retirement plan, with employer matching funds, * Additional Voluntary Retirement Programs: Tax Sheltered Annuity 403(b) and a Deferred Compensation program 457(b), * Flexible spending account options for medical and childcare expenses, * Robust free training access through LinkedIn Learning plus professional conference opportunities, * Tuition assistance, * Expansive employee discount program including athletic tickets, * Free access to UT Austin's libraries and museums with staff ID card, * Free rides on all UT Shuttle and Austin CapMetro buses with staff ID card, * For more details, please see ___ and ___ ___ and ___. What Starts Here Changes the World UTCSR is looking for a "good, sound, forward looking aerospace engineer", at the title of RESA-I/II/III to join our team. The RESA I, II, or III is needed to carry out spaceflight engineering activities in support of our engagement with the GRACE Follow-On, GRACE-Continuity, and the QGG Pathfinder missions operated or in development by an international team led by Caltech/Jet Propulsion Lab. The needed work spans the gamut of spaceflight engineering including mission design, flight dynamics, requirements verification for flight systems, science traceability and requirements flowdown, and support for operations and science analyses. * Support spaceflight systems engineering activities, such as requirements development, interface definition, and verification & validation planning. * Perform data analysis of flight telemetry and housekeeping data to monitor spacecraft health, evaluate system performance, and assess impacts of the space environment (thermal, radiation, orbital dynamics, etc.). * Support the development of science data systems for upcoming missions, including data pipelines, analysis and visualization tools, quality analysis and quality control strategies, and integration with mission operations. * Conduct trade studies to evaluate alternative mission design approaches. * Prepare clear technical reports, presentations, and briefings to communicate results, recommendations, and project status to both technical and non-technical stakeholders. * Other related functions as assigned. • RESA I:Bachelor's degree in Aerospace Engineering or a related field., • RESA II:Master's degree in Aerospace Engineering or a related field or BS and two years' experience in Aerospace Engineering or related field., • RESA III:MS and two years' experience in Aerospace Engineering or a related field, or BS and four years' experience in Aerospace Engineering or related field. For all levels: • Familiarity with space flight environment and spaceflight systems engineering., • Strong foundation in aerospace systems and space flight dynamics., • Ability to carry out spaceflight analysis, including relevant data analysis., • Programming and data analytics skills. Relevant education and experience may be substituted as appropriate. Strong verbal communication and teamwork skills; technical writing skills; analytical, critical thinking and problem-solving skills; time-management skills to enable on-time project delivery. Ability to take the initiative and drive for results, and to work effectively in an interrupt-driven, fast-paced and rapidly changing environment. Proficiency in, or demonstrated ability to quickly become proficient in: • Systems engineering practices (requirements, verification & validation, interface control)., • Ability to analyze flight telemetry and housekeeping data to assess spacecraft health and space environment effects., • Proficiency in data analysis and programming (Python, MATLAB, FORTRAN, C++ or similar)., • Familiarity with database management systems, in particular TimescaleDB/PostgreSQL and/or MongoDB., • Familiarity with visualization interfaces such as Grafana and Plotly. RESA I: $70,000+ depending on qualifications RESA II: $80,000+ depending on qualifications RESA III: $90,000+ depending on qualifications * May work around standard office conditions * Repetitive use of a keyboard at a workstation * Use of manual dexterity (ex: using a mouse) * Climbing of stairs Monday - Friday, typical office hours plus occasional after-hours work. * Resume/CV * 3 work references with their contact information; at least one reference should be from a supervisor * Letter of interest Importantfor applicants who are NOT current university employees or contingent workers:You will be prompted to submit your resume the first time you apply, then you will be provided an option to upload a new Resume for subsequent applications. Any additional Required Materials (letter of interest, references, etc.) will be uploaded in the Application Questions section; you will be able to multi-select additional files. Before submitting your online job application, ensure thatALLRequired Materials have been uploaded. Once your job application has been submitted, you cannot make changes. Important for Current university employees and contingent workers:As a current university employee or contingent worker, you MUST apply within Workday by searching for Find UT Jobs. If you are a current University employee, log-in to Workday, navigate to your Worker Profile, click the Career link in the left hand navigation menu and then update the sections in your Professional Profile before you apply. This information will be pulled in to your application. The application is one page and you will be prompted to upload your resume. In addition, you must respond to the application questionspresented to upload any additional Required Materials (letter of interest, references, etc.) that were noted above. Employment Eligibility: Regular staff who have been employed in their current position for the last six continuous months are eligible for openings being recruited for through University-Wide or Open Recruiting, to include both promotional opportunities and lateral transfers. Staff who are promotion/transfer eligible may apply for positions without supervisor approval. Retirement Plan Eligibility: The retirement plan for this position is Teacher Retirement System of Texas (TRS), subject to the position being at least 20 hours per week and at least 135 days in length. Background Checks: A criminal history background check will be required for finalist(s) under consideration for this position. Equal Opportunity Employer: The University of Texas at Austin, as an ___,complies with all applicable federal and state laws regarding nondiscrimination and affirmative action. The University is committed to a policy of equal opportunity for all persons and does not discriminate on the basis of race, color, national origin, age, marital status, sex, sexual orientation, gender identity, gender expression, disability, religion, or veteran status in employment, educational programs and activities, and admissions. Pay Transparency: The University of Texas at Austin will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Employment Eligibility Verification: If hired, you will be required to complete the federal Employment Eligibility Verification I-9 form. You will be required to present acceptable and original ___ to prove your identity and authorization to work in the United States. Documents need to be presented no later than the third day of employment. Failure to do so will result in loss of employment at the university. E-Verify: The University of Texas at Austin use E-Verify to check the work authorization of all new hires effective May 2015. The university's company ID number for purposes of E-Verify is 854197. For more information about E-Verify, please see the following: • ___ [PDF], • ___ [PDF], • ___ [PDF] Compliance: Employees may be required to report violations of law under Title IX and the Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act (Clery Act). If this position is identified a Campus Security Authority (Clery Act), you will be notified and provided resources for reporting. Responsible employees under Title IX are defined and outlined in ___. The Clery Act requires all prospective employees be notified of the availability of the Annual Security and Fire Safety report. You may ___ or obtain a copy at University Compliance Services, 1616 Guadalupe Street, UTA 2.206, Austin, Texas 78701.

Job Posting Title: Lead R&D Software Engineer, Software/Hardware Integration Hiring Department: Applied Research Laboratories Position Open To: All Applicants Weekly Scheduled Hours: 40 FLSA Status: Exempt Earliest Start Date: Immediately Position Duration: Expected to Continue Location: PICKLE RESEARCH CAMPUS Job Details: Lead development and integration of sonar software applications with tactical hardware components to support the development of sonar systems for the US Navy in the Advanced Technology Laboratory (ATL). * Lead efforts to coordinate integration and configuration of software and hardware to facilitate the development of high-frequency tactical sonar systems. * Provide technical mentorship and supervision to junior engineers. * Work and communicate with a cross disciplinary team of engineers and scientists to meet project deadlines and milestones. * Develop, configure and maintain automated software tools to ensure reproducibility of final product. * Troubleshoot and debug issues observed in ARL developed sonar systems. * Document and present work performed. * Other related functions as assigned. * Master's degree in Computer Science, Computer Engineering, Electrical Engineering or other related discipline. * At least three years of professional experience developing or testing software in a Linux environment. * Ability to scope, organize, and translate high level project requirements into achievable technical tasks. * Exceptional analytical and problem-solving capability. * Thorough understanding of object-oriented programming concepts, data structures/design patterns/algorithm performance analysis. * Excellent communication skills and readiness to work with team leads and principle investigators to ensure technical execution matches design goals. * Aptitude and willingness to continually learn new technologies and apply new skills. Applicant must have a dynamic skill set, willing to work with new technologies, be highly organized and capable of planning and coordinating multiple tasks and managing their time. The position will require attention to detail, effective problem solving skills and excellent judgment. Ability to work independently with sensitive and confidential information, maintain a professional demeanor, work as a team member without daily supervision and effectively communicate with all groups of clients. Able to work under pressure and accept supervision. Regular and punctual attendance. US Citizen. Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information at the level appropriate to the project requirements of the position. * At least 10 years of professional experience integrating custom software applications with industrial embedded computational hardware * Experience configuring or maintaining multi-threaded, multi-process, multi-machine computational software applications in a Linux environment. * Expertise with open-source build tools such as CMake. * Expertise utilizing version control tools such as git to maximize code maintainability and reproducibility. * Proficiency utilizing common application debugging and performance profiling tools. * Understanding of common network protocols such as TCP/IP. * Expertise with interpreted scripting languages such as Python or Bash. * Knowledge of database concepts and/or familiarity with SQL. * Cumulative GPA of at least 3.0. An agency designated by the federal government handles the investigation as to the requirement for eligibility for access to classified information. Factors considered during this investigation include but are not limited to allegiance to the United States, foreign influence, foreign preference, criminal conduct, security violations, drug involvement, the likelihood of continuation of such conduct, etc. Please mark "yes" on the application question that asks if additional materials are required. Failure to attach all additional materials listed below may result in a delay in application processing. Visit our website (___) for additional information about Applied Research Laboratories. UT Austin offers a competitive benefits package that includes: • 100% employer-paid basic medical coverage, • Retirement contributions, • Paid vacation and sick time $104,000-$174,000+/negotiable depending on qualifications * Standard office conditions * Repetitive use of a keyboard at a workstation * Use of manual dexterity * Possible weekend, evening and holiday work * Possible interstate/intrastate travel * Resume/CV * 3 work references with their contact information; at least one reference should be from a supervisor * Letter of interest * Unofficial college transcripts Importantfor applicants who are NOT current university employees or contingent workers:You will be prompted to submit your resume the first time you apply, then you will be provided an option to upload a new Resume for subsequent applications. Any additional Required Materials (letter of interest, references, etc.) will be uploaded in the Application Questions section; you will be able to multi-select additional files. Before submitting your online job application, ensure thatALLRequired Materials have been uploaded. Once your job application has been submitted, you cannot make changes. Important for Current university employees and contingent workers:As a current university employee or contingent worker, you MUST apply within Workday by searching for Find UT Jobs. If you are a current University employee, log-in to Workday, navigate to your Worker Profile, click the Career link in the left hand navigation menu and then update the sections in your Professional Profile before you apply. This information will be pulled in to your application. The application is one page and you will be prompted to upload your resume. In addition, you must respond to the application questionspresented to upload any additional Required Materials (letter of interest, references, etc.) that were noted above. Employment Eligibility: Regular staff who have been employed in their current position for the last six continuous months are eligible for openings being recruited for through University-Wide or Open Recruiting, to include both promotional opportunities and lateral transfers. Staff who are promotion/transfer eligible may apply for positions without supervisor approval. Retirement Plan Eligibility: The retirement plan for this position is Teacher Retirement System of Texas (TRS), subject to the position being at least 20 hours per week and at least 135 days in length. Background Checks: A criminal history background check will be required for finalist(s) under consideration for this position. Equal Opportunity Employer: The University of Texas at Austin, as an ___,complies with all applicable federal and state laws regarding nondiscrimination and affirmative action. The University is committed to a policy of equal opportunity for all persons and does not discriminate on the basis of race, color, national origin, age, marital status, sex, sexual orientation, gender identity, gender expression, disability, religion, or veteran status in employment, educational programs and activities, and admissions. Pay Transparency: The University of Texas at Austin will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Employment Eligibility Verification: If hired, you will be required to complete the federal Employment Eligibility Verification I-9 form. You will be required to present acceptable and original ___ to prove your identity and authorization to work in the United States. Documents need to be presented no later than the third day of employment. Failure to do so will result in loss of employment at the university. E-Verify: The University of Texas at Austin use E-Verify to check the work authorization of all new hires effective May 2015. The university's company ID number for purposes of E-Verify is 854197. For more information about E-Verify, please see the following: • ___ [PDF], • ___ [PDF], • ___ [PDF] Compliance: Employees may be required to report violations of law under Title IX and the Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act (Clery Act). If this position is identified a Campus Security Authority (Clery Act), you will be notified and provided resources for reporting. Responsible employees under Title IX are defined and outlined in ___. The Clery Act requires all prospective employees be notified of the availability of the Annual Security and Fire Safety report. You may ___ or obtain a copy at University Compliance Services, 1616 Guadalupe Street, UTA 2.206, Austin, Texas 78701.

ENGINEERING/IT Multiple Open Positions: Samsung Austin Semiconductor, LLC has the following positions in Austin, Texas: Engineer (Job# R102576): Responsible for performing semiconductor engineering research, design, development, and testing for firm products and devices in conjunction with product development for use in the electronic communications industry. Staff Engineer (Job# R102577): To perform semiconductor engineering research, design, development, and/or testing for firm products and/or devices for use in the electronic communication industry. Design and implement features for a compiler back end targeting the Samsung GPU architecture from OpenGL-ES and OpenCL applications. Staff Engineer (Job# R102586): To perform semiconductor engineering research, design, development, and/or testing for firm products and/or devices for use in the electronic communication industry. Work with cross-functional teams to create and execute verification plans developed by reading high level design specification and RTL. Up to 10% domestic travel to other Samsung sites is required. All positions permit work from home on a hybrid schedule within commutable distance of work locations. All positions require related degree and/or experience and/or skills. For full information & to apply online, visit our careers page at

Identify and diagnose RTL issues quickly, working directly with designers to accelerate bring-up and resolve design defects efficiently. Professional RTL functional verification experience for FPGA or ASIC designs. We're working with one of the most prestigious high-frequency trading companies in th

Qualcomm Technologies, Inc. Engineering Group, Engineering Group > CPU Engineering General Summary: As a Physical Design Clock Engineer, you will work with microarchitecture, RTL design, CAD, block level and top level physical design teams to create best in class clocking solutions for next generation CPUs. * Experience in all aspects of construction and analysis of low skew and low power clock generation and distribution. * Experience in clock H-tree, mesh, spines and CTS implementations. * Good understanding of device physics, RC delay and electrical aspects. * Proficiency in SPICE simulation and analysis for circuit design and verification. * MS in Electrical Engineering; 8+ years of practical experience. * Skilled in chip physical design, standard cell optimizations, and clock construction. * Defined clock methodology across various designs. * Preferred experience in deep submicron process technology nodes. * Proficient in PLL specifications, clock skew estimation, and jitter measurements. * Strong communication skills for team collaboration and issue resolution. * Work with design teams to understand, implement and validate CPU clocking. * Drive overall clock generation and distribution methodology of CPU. * Work with CAD & block level designers to implement the clocking techniques for optimizing skew and power. * Perform jitter analysis and measurements and provide feedback to block level and top level physical design engineers on key fixes required. This position is open to both locations Austin and Santa Clara. The compensations will be adjusted based on the location. Minimum Qualifications: Qualcomm is an equal opportunity employer. If you are an individual with a disability and need an accommodation during the application/hiring process, rest assured that Qualcomm is committed to providing an accessible process. You may e-mail ___ or call Qualcomm's toll-free number found ___. Upon request, Qualcomm will provide reasonable accommodations to support individuals with disabilities to be able participate in the hiring process. Qualcomm is also committed to making our workplace accessible for individuals with disabilities. (Keep in mind that this email address is used to provide reasonable accommodations for individuals with disabilities. We will not respond here to requests for updates on applications or resume inquiries). To all Staffing and Recruiting Agencies: Our Careers Site is only for individuals seeking a job at Qualcomm. Staffing and recruiting agencies and individuals being represented by an agency are not authorized to use this site or to submit profiles, applications or resumes, and any such submissions will be considered unsolicited. Qualcomm does not accept unsolicited resumes or applications from agencies. Please do not forward resumes to our jobs alias, Qualcomm employees or any other company location. Qualcomm is not responsible for any fees related to unsolicited resumes/applications. EEO Employer: Qualcomm is an equal opportunity employer; all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, Veteran status, or any other protected classification. Qualcomm expects its employees to abide by all applicable policies and procedures, including but not limited to security and other requirements regarding protection of Company confidential information and other confidential and/or proprietary information, to the extent those requirements are permissible under applicable law. Pay range and Other Compensation & Benefits: $148,300.00 - $222,500.00 The above pay scale reflects the broad, minimum to maximum, pay scale for this job code for the location for which it has been posted. Even more importantly, please note that salary is only one component of total compensation at Qualcomm. We also offer a competitive annual discretionary bonus program and opportunity for annual RSU grants (employees on sales-incentive plans are not eligible for our annual bonus). In addition, our highly competitive benefits package is designed to support your success at work, at home, and at play. Your recruiter will be happy to discuss all that Qualcomm has to offer – and you can review more details about our US benefits at this ___. If you would like more information about this role, please contact ___.

Qualcomm Technologies, Inc. Engineering Group, Engineering Group > CPU Engineering General Summary: As a Senior Data Center Post Silicon Power and Performance Engineer, you will work to characterize, debug, and optimize the performance and power consumption of complex SoCs and systems. You will help set up methodologies, develop validation and benchmarking plans, recommend tuning optimizations, and verify that the newly arrived silicon meets the highest performance and power efficiency. You will also participate in architecture and product definition feedback for the next generation of server CPUs by closing the loop with real silicon analysis. Roles and Responsibilities • Characterize Data Center workloads on system to provide inputs into pre-Si modeling and projection, • Define and execute end-to-end performance and power analysis plans for complex server CPUs and systems, • Debug issues found during pre-silicon, bring-up, validation, and production phases of SOC programs, • Define an optimization strategy that delivers world class CPU workload performance, • Lead collaborative test approach with multiple teams, and tracking test execution to make sure all features are performant and optimized on time, • Work closely with supporting teams in design, architecture, emulation, firmware, design verification and software to ensure readiness for first silicon arrival, evaluation of CPU and system performance upon silicon arrival, and evaluation of critical Data Center workloads, • Develop deep knowledge of CPU architecture, SoC system architecture, system benchmarking techniques, and power reduction and optimization methods, • Drive technical innovation to enhance capabilities in CPU performance, system performance and power validation including tools and script development, technical and procedural methodology enhancement, and various internal and cross-functional technical initiatives Preferred Qualifications • Bachelor or Masters Degree in Computer or Electrical Engineering, • 12 to 20+ years of practical experience in post silicon performance and power analysis of SoCs, • Strong programming/scripting skills (C/C++, Python scripts), • Strong familiarity with Data Center workloads, including CPU, memory, and IO bound workloads, • Strong analytical skills for test plan creation and debug, • Strong communication and collaboration skills, • Must excel in a dynamic team working environment, • Must be a self-starter and be able to independently drive tasks to completion, • Proven understanding of CPU, memory hierarchy, system interconnects., • Knowledge and experience in ARM v8 and v9 specifications, • Solid grasp of ARM SoC concepts and architecture specifications like SMMU, GIC, Coresight-PMU and Timer architectures, • Extensive experience in the following technical areas:, • Proven understanding of critical industry CPU workloads and system interactions and dependencies, • Platform benchmarking and knowledge of performance workloads, • Performance analysis tools and analysis techniques, • Power analysis methods and comprehensive understanding of power consumption, • Power management methodologies and deep understanding of tuning and optimization, • Modern lab equipment, including DAQs, protocol/logic analyzers, oscilloscopes, • Computer hardware and architecture (experience with datacenter servers a plus) Minimum Qualifications: Qualcomm is an equal opportunity employer. If you are an individual with a disability and need an accommodation during the application/hiring process, rest assured that Qualcomm is committed to providing an accessible process. You may e-mail ___ or call Qualcomm's toll-free number found ___. Upon request, Qualcomm will provide reasonable accommodations to support individuals with disabilities to be able participate in the hiring process. Qualcomm is also committed to making our workplace accessible for individuals with disabilities. (Keep in mind that this email address is used to provide reasonable accommodations for individuals with disabilities. We will not respond here to requests for updates on applications or resume inquiries). To all Staffing and Recruiting Agencies: Our Careers Site is only for individuals seeking a job at Qualcomm. Staffing and recruiting agencies and individuals being represented by an agency are not authorized to use this site or to submit profiles, applications or resumes, and any such submissions will be considered unsolicited. Qualcomm does not accept unsolicited resumes or applications from agencies. Please do not forward resumes to our jobs alias, Qualcomm employees or any other company location. Qualcomm is not responsible for any fees related to unsolicited resumes/applications. EEO Employer: Qualcomm is an equal opportunity employer; all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, Veteran status, or any other protected classification. Qualcomm expects its employees to abide by all applicable policies and procedures, including but not limited to security and other requirements regarding protection of Company confidential information and other confidential and/or proprietary information, to the extent those requirements are permissible under applicable law. Pay range and Other Compensation & Benefits: $179,000.00 - $268,400.00 The above pay scale reflects the broad, minimum to maximum, pay scale for this job code for the location for which it has been posted. Even more importantly, please note that salary is only one component of total compensation at Qualcomm. We also offer a competitive annual discretionary bonus program and opportunity for annual RSU grants (employees on sales-incentive plans are not eligible for our annual bonus). In addition, our highly competitive benefits package is designed to support your success at work, at home, and at play. Your recruiter will be happy to discuss all that Qualcomm has to offer – and you can review more details about our US benefits at this ___. If you would like more information about this role, please contact ___.

Job Posting Title: Lead Data Engineer Hiring Department: Enterprise Technology - Data to Insights (D2I) Position Open To: All Applicants Weekly Scheduled Hours: 40 FLSA Status: Exempt Earliest Start Date: Immediately Position Duration: Expected to Continue Until Dec 19, 2026 Location: Texas Job Details: This is a fixed term position that is expected to continue for a 1-year limited term from start date with a possibility for extension. Flexible work arrangements are available for this position, including the ability to work 100% remotely. Remote work for individuals who reside outside Texas but within the United States and its territories will be considered and requires Central Office approval. This position provides life/work balance with typically a 40-hour work week and travel limited to training (e.g., conferences/courses). Enterprise Technology is dedicated to supporting the mission of the University of Texas at Austin of unlocking potential and preparing future leaders of the state. Your skills will make a difference. You'll be working for a university that is internationally recognized for research and the work you do will make a difference in the lives of our students, faculty and staff. If you're the type of person that wants to know your work has meaning and impact, you'll like working for our campus. The University of Texas at Austin and Enterprise Technology provide an outstanding benefits package to our staff. Those benefits include: * Competitive health benefits (Employee premiums covered at 100%; family premiums at 50%) * Vision, dental, life, and disability insurance options * Paid vacation, sick leave, and holidays * Teachers Retirement System of Texas (a defined benefit retirement plan) * Additional voluntary retirement programs: tax sheltered annuity 403(b) and a deferred compensation program 457(b) * Flexible spending account options for medical and childcare expenses * Training and conference opportunities * Tuition assistance * Athletic ticket discounts * Access to UT Austin's libraries and museums * Free rides on all UT Shuttle and Capital Metro buses with staff ID card For more details, please see: ___ and ___ Must be authorized to work in the United States on a full-time basis for any employer without sponsorship. This position requires you to maintain internet service and a mobile phone with voice and data plans to be used when required for work. The Lead Data Engineer for the UT Data Hub improves university outcomes and advances the UT mission to transform lives for the benefit of society by increasing the useability and value of institutional data. You will lead senior data engineers and data engineers to create complex data pipelines within UT's cloud data ecosystem in support of academic and administrative needs. In collaboration with our team of data professionals, you will help build and run a modern data hub to enable advanced data-driven decision making for UT. You will leverage your creativity to solve complex technical problems and build effective relationships through open communication within the team and outside partners. • Design, architect, and deliver production-grade, scalable data pipelines and AI-ready data platforms using Databricks,AWScloud-native services and modern data engineering frameworks., • Lead end-to-end implementation oflakehousedata pipelines, ensuring performance, reliability, and cost efficiency., • Championindustrybest practices for data engineering., • Conduct andparticipatein peer code reviews tomaintaincode quality and consistency across the team., • Proactivelyidentifyand resolve bottlenecks in data ingestion, transformation, and orchestration processes using Databricks Delta Live Tables, Spark optimizationtechniques, and workflow automation., • Implement systems for data quality, observability, governance, and compliance using tools such as Unity Catalog, Delta Lake, and data validation frameworks., • Lead technical knowledge-sharing sessions on topics such as AI/ML integration, datalakehousearchitecture, and emerging data technologies., • Define project milestones, timelines, and deliverables for data and AI initiatives, ensuringtimelyand high-quality outcomes., • Collaborate with both internal and external stakeholderssuch as data architects, system architects, business users, Agile teammembers, and other D2I internal groups., • Manage project priorities, sprint planning, and team workloads while balancing innovation with delivery., • Communicate risks, dependencies, and resource constraints effectively, and develop mitigation plans for on-time project delivery., • Supervise and mentor a team of Data Engineers (2-5 individuals) working on cloud, Databricks, and AI pipeline initiatives., • Foster a culture of continuous learning, experimentation, and technical excellence, encouraging engineers to explore AI and automation use cases., • Participate in recruiting, onboarding, and developing data engineering talent with strong Databricks and AI skillsets., • Conduct performance reviews, set development goals, and create individualized growth plans for team members., • Encourage collaboration across Data, AI/ML, Analytics, and Infrastructure teams to drive cross-functional success., • Provide regular updates on project progress, technical challenges, andprojectmilestones to both technical and business stakeholders., • Translate complex technical concepts related to Databricks, AI, and data architecture into clear narratives for non-technical audiences., • Foster a transparent communication culture and provide actionable feedback to promote a growth mindset., • Ensure all data engineering processes, architectures, and standards are well-documented for reuse, governance, andknowledgecontinuity., • Stay current with advancements in AI, data engineering, and Databricks ecosystem, evaluating new tools and frameworks for potential adoption., • Pilot and promote innovative solutions such as AI-assisted data quality checks, data observability automation, and intelligent pipeline optimization., • Perform other duties as assigned, contributing to the organization's data-driven and AI-enabled transformation., • Bachelor's orMaster's degree in Computer Science, Information Systems, Engineering, or equivalent professional experience., • 5+ years of experience designing, implementing, andoptimizingcomplex, production-grade datapipelinesor enterprise-scale data platforms., • 5 years of experience in cloud-based data engineering using Databricks and Amazon Web Services (AWS) (e.g., Glue, S3, Lambda, Redshift)., • 3+ years of experience managing or leading teams of data and/or software engineers, including mentorship, performance management, and project delivery., • Expertisein Python,PySpark, and SQL, withstrongunderstanding of data modeling, stored procedures, and scalable data transformations., • Proven experience architecting and implementing ETL/ELT solutions across relational, non-relational, andlakehouseenvironments (e.g., Delta Lake, Parquet, or Iceberg)., • Experience designing and managing CI/CD pipelines andinfrastructureascode(IaC) using tools such as Databricks Repos, CDK, Terraform, or GitHub Actions., • Demonstrated knowledge of test-driven development (TDD) and data quality frameworks, ensuring reliability and reproducibility across data workflows., • Deep understanding of data governance, security, and compliance standards in cloud environments., • Excellent analytical, problem-solving, and debugging skills across distributed data systems., • Proven ability to communicate complex technical concepts clearly to both technical and non-technical audiences., • Experience supervising, mentoring, and guiding junior team members on technical and professional development. Equivalent combination of relevant education and experience may be substituted as appropriate. • 8+ years of experience in Data Engineering or related fields, including 5+ years of hands-on experience building andoptimizingdata pipelines on Databricks or similar large-scale data platforms., • Proven experience implementinglakehousearchitectures leveraging Databricks Delta Lake, Delta Live Tables, and Unity Catalog for governance and scalability., • Experience designing AI-ready data platforms and integrating machine learning pipelines using tools such asMLflowor model registry frameworks., • 3+ years of experience managing or leading cross-functional technical teams, fostering collaboration between Data Engineering, Analytics, and AI/ML teams., • 5+ years of experience with Agile software development methodologies and project tracking systems such as JIRA., • Expertisein distributed data processing and streaming frameworks, such as Apache Spark, Kafka, Flink, or Airflow, for orchestration and automation., • Strong familiarity with data observability, cost optimization, and performance tuning in Databricks and cloud-nativearchitecture., • Professional certifications such as Databricks Certified Data Engineer Professional or AWS Solutions Architector AWSData Analytics Specialty are highly desirable., • Demonstrated ability to introducenew technologiesand best practices to modernize existing data environments and promote AI/analytics maturity across the organization., • Passion for continuous learning and staying current with emerging technologies in data engineering, AI integration, and Databricks ecosystem advancements. $125,000 - $143,712 • May work around standard office conditions, • Repetitive use of a keyboard at a workstation, • Use of manual dexterity (ex: using a mouse), • Monday - Friday 8am-5pm; Occasional nights or weekends may be required, • Resume/CV, • 3 work references with their contact information; at least one reference should be from a supervisor, • Letter of interest Importantfor applicants who are NOT current university employees or contingent workers:You will be prompted to submit your resume the first time you apply, then you will be provided an option to upload a new Resume for subsequent applications. Any additional Required Materials (letter of interest, references, etc.) will be uploaded in the Application Questions section; you will be able to multi-select additional files. Before submitting your online job application, ensure thatALLRequired Materials have been uploaded. Once your job application has been submitted, you cannot make changes. Important for Current university employees and contingent workers:As a current university employee or contingent worker, you MUST apply within Workday by searching for Find UT Jobs. If you are a current University employee, log-in to Workday, navigate to your Worker Profile, click the Career link in the left hand navigation menu and then update the sections in your Professional Profile before you apply. This information will be pulled in to your application. The application is one page and you will be prompted to upload your resume. In addition, you must respond to the application questionspresented to upload any additional Required Materials (letter of interest, references, etc.) that were noted above. Employment Eligibility: Regular staff who have been employed in their current position for the last six continuous months are eligible for openings being recruited for through University-Wide or Open Recruiting, to include both promotional opportunities and lateral transfers. Staff who are promotion/transfer eligible may apply for positions without supervisor approval. Retirement Plan Eligibility: The retirement plan for this position is Teacher Retirement System of Texas (TRS), subject to the position being at least 20 hours per week and at least 135 days in length. Background Checks: A criminal history background check will be required for finalist(s) under consideration for this position. Equal Opportunity Employer: The University of Texas at Austin, as an ___,complies with all applicable federal and state laws regarding nondiscrimination and affirmative action. The University is committed to a policy of equal opportunity for all persons and does not discriminate on the basis of race, color, national origin, age, marital status, sex, sexual orientation, gender identity, gender expression, disability, religion, or veteran status in employment, educational programs and activities, and admissions. Pay Transparency: The University of Texas at Austin will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Employment Eligibility Verification: If hired, you will be required to complete the federal Employment Eligibility Verification I-9 form. You will be required to present acceptable and original ___ to prove your identity and authorization to work in the United States. Documents need to be presented no later than the third day of employment. Failure to do so will result in loss of employment at the university. E-Verify: The University of Texas at Austin use E-Verify to check the work authorization of all new hires effective May 2015. The university's company ID number for purposes of E-Verify is 854197. For more information about E-Verify, please see the following: • ___ [PDF], • ___ [PDF], • ___ [PDF] Compliance: Employees may be required to report violations of law under Title IX and the Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act (Clery Act). If this position is identified a Campus Security Authority (Clery Act), you will be notified and provided resources for reporting. Responsible employees under Title IX are defined and outlined in ___. The Clery Act requires all prospective employees be notified of the availability of the Annual Security and Fire Safety report. You may ___ or obtain a copy at University Compliance Services, 1616 Guadalupe Street, UTA 2.206, Austin, Texas 78701.

Job Posting Title: Senior or Principal Signal Power Integrity and Multiphysics Engineer, Texas Institute for Electronics Hiring Department: Texas Institute for Electronics Position Open To: All Applicants Weekly Scheduled Hours: 40 FLSA Status: To Be Determined at Offer Earliest Start Date: Ongoing Position Duration: Expected to Continue Location: AUSTIN, TX Job Details: Applicants must be eligible to work in the United States on a full-time basis for any employer without sponsorship. The___is a transformative, well-funded semiconductor foundry venture combining the agility of a startup with the scale of a national initiative. A key part of our mission is to advance the state of the art in 3D heterogeneous integration (3DHI), chiplet-based architectures, and multi-component microsystems- catalyzing breakthroughs across microelectronics, artificial intelligence, quantum computing, high-performance computing, and next-generation healthcare devices. Backed by $1.4 billion in combined funding from DARPA, Texas state initiatives, and strategic partners, we are building foundational capabilities in advanced packaging and integrated design infrastructure to restore U.S. leadership in microelectronics manufacturing. Our 3DHI and chiplet integration platforms integrate novel thermal management and advanced interconnect solutions to deliver unprecedented performance and energy efficiency. Operating at the intersection of defense electronics and commercial markets, TIE offers a rare opportunity to reimagine an industry from the ground up and build transformative products with global impact. With over $1 billion in funding from the US DoD and the state of Texas, we'reat the forefront of creating cutting-edge semiconductor manufacturing equipment and processes that will set the course for future advancements in semiconductor logic, memory, heterogeneous integration, chip cooling and more. Situated in the heart of Austin - named "America's Coolest City" by Expedia and "The Best Place to Live in the U.S." by U.S. News and World Report - the Texas Institute for Electronics embodies the city's innovative spirit. UT Austin, recognized by Forbes as one of ___, provides outstanding ___ and ___ packages that include: * Competitive health benefits (employee premiums covered at 100%, family premiums at 50%) * Voluntary Vision, Dental, Life, and Disability insurance options * Generous paid vacation, sick time, and holidays * Teachers Retirement System of Texas, a defined benefit retirement plan, with employer matching funds * Additional Voluntary Retirement Programs: Tax Sheltered Annuity 403(b) and a Deferred Compensation program 457(b) * Flexible spending account options for medical and childcare expenses * Robust free training access through LinkedIn Learning plus professional conference opportunities * Tuition assistance * Expansive employee discount program including athletic tickets * Free access to UT Austin's libraries and museums with staff ID card * Free rides on all UT Shuttle and Austin CapMetro buses with staff ID card For more details, please see: ___ and ___ This role is to lead and execute comprehensive Signal Integrity (SI), Power Integrity (PI), and Multiphysics simulations for advanced 2.5D/3.0D heterogeneous integration and multi-material packages. The position will also collaborate with EDA vendors, OSATs, and foundries, and stay current with next-gen interface standards to guide technical strategy and mentor junior engineers. • Own and execute hands-on SI/PI and Multiphysics simulations for advanced 2.5D/3.0D heterogeneous integration and multi-material packages., • Perform modeling, extraction, and verification of high-speed interconnects, power delivery networks, thermal management, and mechanical stress across chiplets and advanced substrates., • Build and validate comprehensive ADK/PDK models (electrical, EM, thermal, mechanical) that accurately represent package-level behavior and enable system-level co-design., • Run end-to-end simulation workflows including EM extraction, S-parameter generation, PDN impedance analysis, crosstalk/eye diagram simulations, thermal/structural reliability checks, and co-simulation across domains., • Collaborate directly with EDA vendors (Cadence, Ansys, Synopsys, Siemens, Keysight, etc.), OSATs, and foundries to develop, test, and refine package simulation flows., • Generate user guides, reference flows, scripts, and automation that make SI/PI/multiphysics enablement repeatable and accessible to design teams., • Stay current with next-gen interface standards (PCIe Gen6/7, CXL, UCIe, UALink, SerDes, HBM) and incorporate their requirements into package design methodologies., • Guide technical strategy for SI/PI flows, mentor junior engineers, and represent TIE in working groups, customer design reviews, and industry forums., • Other related functions as assigned., • BS in Electrical Engineering, Computer Engineering, Applied Physics, or related discipline., • 8 or more years of direct, hands-on experience in signal integrity, power integrity, and multiphysics simulations for advanced packaging, 2.5D/3DIC, or heterogeneous integration platforms., • 12 or more years of direct, hands-on experience in signal integrity, power integrity, and multiphysics simulations for advanced packaging, 2.5D/3DIC, or heterogeneous integration platforms. For both titles:, • Strong expertise with EDA/EM/multiphysics tools: Ansys HFSS/SIwave, Cadence Sigrity/Clarity, Synopsys RaptorX, Siemens HyperLynx, Keysight ADS, COMSOL, CST Studio., • Proven ability to extract/package-level models (RLC, S-parameters, dielectric/thermal constants, warpage/stress data) and integrate them into design enablement flows., • Demonstrated experience creating and validating PDK/ADK simulation collateral spanning SI/PI, RF, thermal, and mechanical domains., • Hands-on scripting/automation skills (Python, Tcl, SKILL, etc.) to streamline simulation flows., • Startup DNA. You're energized by ambiguity, act with urgency, and take personal ownership for outcomes. You make things happen., • Execution mindset. You have demonstrated experience working in a hands-on role driving progress across multiple initiatives without layers of management., • Location. Austin, Texas is preferred for close collaboration with our engineering teams and partners. Hybrid work arrangements may be possible with travel up to 30-50%. Such arrangements are subject to University review and approval in relation to jurisdictional employment-related laws, rules, and regulations. Relevant education and experience may be substituted as appropriate. • MS or PhD in Electrical Engineering, Applied Physics, or related discipline., • Deep experience with multi-material packages (Si, glass, organics, Cu, RDL, TSV, hybrid bonding, etc.)., • Expertise in system-level co-simulation spanning electrical, thermal, and mechanical domains for high-power/high-bandwidth-density packages., • Familiarity with industry standards (IEEE, JEDEC, OIF, UCIe, 3Dblox, JEP30) and experience contributing to working groups., • Background in high-speed interconnect modeling and compliance testing for PCIe, CXL, UCIe, SerDes, HBM, or similar standards., • Track record of technical publications, patents, or open-source contributions in SI/PI/multiphysics simulation and design enablement. TIE Pays Industry Competitive Salaries • May work in all weather conditions, • May work in extreme temperatures, • May work around chemical fumes, • Climbing of stairs, • Climbing of ladders, • Lifting and moving 30 pounds, • Monday - Friday 8am to 5pm, • Occasional/frequent nights/weekends required, • Resume/CV, • 3 work references with their contact information; at least one reference should be from a supervisor, • Letter of interest Importantfor applicants who are NOT current university employees or contingent workers:You will be prompted to submit your resume the first time you apply, then you will be provided an option to upload a new Resume for subsequent applications. Any additional Required Materials (letter of interest, references, etc.) will be uploaded in the Application Questions section; you will be able to multi-select additional files. Before submitting your online job application, ensure thatALLRequired Materials have been uploaded. Once your job application has been submitted, you cannot make changes. Important for Current university employees and contingent workers:As a current university employee or contingent worker, you MUST apply within Workday by searching for Find UT Jobs. If you are a current University employee, log-in to Workday, navigate to your Worker Profile, click the Career link in the left hand navigation menu and then update the sections in your Professional Profile before you apply. This information will be pulled in to your application. The application is one page and you will be prompted to upload your resume. In addition, you must respond to the application questionspresented to upload any additional Required Materials (letter of interest, references, etc.) that were noted above. Employment Eligibility: Regular staff who have been employed in their current position for the last six continuous months are eligible for openings being recruited for through University-Wide or Open Recruiting, to include both promotional opportunities and lateral transfers. Staff who are promotion/transfer eligible may apply for positions without supervisor approval. Retirement Plan Eligibility: The retirement plan for this position is Teacher Retirement System of Texas (TRS), subject to the position being at least 20 hours per week and at least 135 days in length. This position has the option to elect the Optional Retirement Program (ORP) instead of TRS, subject to the position being 40 hours per week and at least 135 days in length. Background Checks: A criminal history background check will be required for finalist(s) under consideration for this position. Equal Opportunity Employer: The University of Texas at Austin, as an ___,complies with all applicable federal and state laws regarding nondiscrimination and affirmative action. The University is committed to a policy of equal opportunity for all persons and does not discriminate on the basis of race, color, national origin, age, marital status, sex, sexual orientation, gender identity, gender expression, disability, religion, or veteran status in employment, educational programs and activities, and admissions. Pay Transparency: The University of Texas at Austin will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Employment Eligibility Verification: If hired, you will be required to complete the federal Employment Eligibility Verification I-9 form. You will be required to present acceptable and original ___ to prove your identity and authorization to work in the United States. Documents need to be presented no later than the third day of employment. Failure to do so will result in loss of employment at the university. E-Verify: The University of Texas at Austin use E-Verify to check the work authorization of all new hires effective May 2015. The university's company ID number for purposes of E-Verify is 854197. For more information about E-Verify, please see the following: • ___ [PDF], • ___ [PDF], • ___ [PDF] Compliance: Employees may be required to report violations of law under Title IX and the Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act (Clery Act). If this position is identified a Campus Security Authority (Clery Act), you will be notified and provided resources for reporting. Responsible employees under Title IX are defined and outlined in ___. The Clery Act requires all prospective employees be notified of the availability of the Annual Security and Fire Safety report. You may ___ or obtain a copy at University Compliance Services, 1616 Guadalupe Street, UTA 2.206, Austin, Texas 78701.

Design Verification Engineers at Apple are responsible for verifying the functionality and performance of Apple's premier SOCs.

Job DescriptionWho We AreArrive Logistics is a leading transportation and technology company in North America, with plans to continue to significantly grow year over year. Our success is a testament to our remarkable team and what we are building together. We’re committed to providing employees with a meaningful work experience and have established an award-winning culture that supports personal and career development in a fun, casual, and collaborative environment. There has never been a more exciting time to get on board, so read on to learn more and apply today! Who We WantAs a Machine Learning Platform Engineer at Arrive Logistics, you will play a key role in maintaining and expanding Arrive's ML platform and product capabilities. This role requires driving and contributing to crucial roadmap projects while ensuring quality, maintainability and functionality. These initiatives may vary from serving models scalably to building ML-powered products focused on maximizing profit.What You’ll Do • Design, build, and maintain scalable ML systems and infrastructure using Python, Postgres, and Elasticsearch., • Partner closely with other Machine Learning Engineers, Product Managers, Data Scientists, Data Engineers, and Product Engineers to ensure the successful delivery of strategic and roadmap initiatives, • Own systems throughout the software development lifecycle, from design to development, deployment and monitoring., • Maintain and improve performance of existing data systems and processes while balancing maintainability, observability and readability., • Participate in an on-call rotation where you will support incidents and questions about service behavior from product managers., • Demonstrate a deep sense of ownership by developing a thorough understanding of a domain. At the same time, you must be able to explain the behavior of and contribute to code bases that may be outside your domain., • Proactively propose solutions to gaps in process, technology, software design and architecture, • Provide rigorous and detailed code reviews that uphold team standards, testing and software design best practices, • Foster a culture of constant improvement and growth, engineering excellence, humility, positivity and curiosity. Take a lead role in making our two days in the office productive and engaging, fostering face-to-face mentorship and collaborative whiteboarding sessions.Qualifications, • Bachelor’s degree in Computer Science, Engineering, or a related field or equivalent professional experience., • 3+ years of experience with ML ops (features stores, model registries and auto ML), model serving and optimization., • 3+ years of experience with Python and building highly scalable backend services, • Experience with frameworks like Sklearn, Pandas and Numpy. Plus if Huggingface, Tensorflow, Pytorch experience., • 2+ years of experience with relational databases, • 2+ years of experience designing maintainable and scalable systems, • System design experience with a focus on loosely coupled, distributed systems, microservices and event-driven architectures, • Experience developing cloud-native dockerized applications in Kubernetes, • Experience working with online experimentation and platforms like Statsig, • Understanding of both traditional machine learning and deep neural networks, • Strong communication skills with the ability to articulate, diagram and document complex ML or engineering concepts., • Strong analytical, problem-solving, decision-making, and interpersonal skills., • Strong project management and organizational skills with experience identifying project milestones to ensure timely project delivery, • You are a self-starter who can deliver projects independently, yet you also thrive in collaborative environments. You recognize the value of diverse perspectives in developing optimal solutions and consistently demonstrate a willingness to support colleagues as a strong team player., • You approach software engineering as a craft, balancing the pursuit of clean, maintainable code with the demands of a fast-moving, dynamic business environment. You collaborate effectively with product managers and leadership to choose development paths that minimize technical debt while ensuring the timely delivery of high-quality products. While you have a strong drive for innovation, you also recognize the critical need to stabilize and harden existing products and services., • You believe that while remote work is functional, in-person collaboration is where the "magic" happens. You are excited to help shape the energy of our physical workspace., • You take initiative to go beyond current responsibilities and actively seek new challenges., • You are passionate about building high impact ML and data driven products.The Perks of Working With Us, • Take advantage of our comprehensive benefits package, including medical, dental, vision, life, disability, and supplemental coverage., • Invest in your future with our matching 401(k) program., • Build relationships and find your home at Arrive through our Employee Resource Groups., • Enjoy office wide engagement activities, team events, happy hours and more!, • Leave the suit and tie at home; our dress code is casual., • Work in the booming city of Austin, TX – we are in a convenient location close to the airport and downtown., • Park your car for free on site!, • Start your morning with a specialty drink from our fully stocked coffee bar, Broker’s Brew., • Sweat it out with the team at our onsite gym., • Maximize your wellness with free counseling sessions through our Employee Assistance Program, • Take time to manage your physical and mental health - we offer company paid holidays, paid vacation time and wellness days., • Receive 100% paid parental leave when you become a new parent., • Get paid to work with your friends through our Referral Program!

Job DescriptionSaronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. Job Overview Saronic is seeking a Senior EWIS Engineer to own and drive EWIS architecture execution for a platform or major subsystem, translating schematic intent into manufacturable harness documentation and reliable vessel integration. This role leads technical decisions, supports production scale-up, interfaces directly with manufacturing and suppliers, and mentors junior EWIS engineers while ensuring compliance with applicable standards and program requirements.Responsibilities & Requirements • Develop and maintain EWIS architectures, schematics, and harness assembly drawings in Zuken E3 with a strong emphasis on design intent, configuration control, and manufacturability., • Lead complex 3D harness routing and packaging trade studies using NX (or equivalent), balancing integration constraints, serviceability, and production repeatability., • Independently size wiring, shields, and protection devices considering continuous/transient loads, voltage drop, derating, thermal environment, and fault conditions., • Identify and mitigate EMI/EMC risk through grounding/bonding strategy, routing/separation, shielding, and termination choices aligned to system architecture., • Review and approve EWIS designs produced by Level 1 engineers; mentor and raise documentation and design quality across the team., • Serve as a primary EWIS interface to manufacturing and external suppliers; drive build readiness, incorporate DFM feedback, and mitigate schedule/technical risk., • Plan and review EWIS verification & validation activities; lead root-cause analysis and corrective actions for complex wiring, EMI, and integration issues., • Interpret and enforce IPC/WHMA, ABYC, ABS, and applicable MIL standards within projects, ensuring consistent application across designs and releases.Qualifications & Skills, • Bachelor’s degree in Electrical Engineering, Mechatronics, or related field., • 5–12+ years of EWIS, harness engineering, or electrical integration experience with demonstrated ownership., • Proficiency with Zuken E3 (or equivalent) and 3D harness routing/integration tools (e.g., NX or equivalent)., • Deep expertise in EWIS integration and production support, including independent wire/shield/protection sizing and robust grounding/bonding/shielding strategies., • Strong ability to interpret and produce complex technical documentation (schematics, BOMs, harness/installation drawings) and ensure design intent carries through to installation., • Proven ability to lead cross-functional technical execution, improve workflows/documentation quality, and mentor engineers.Physical Requirements, • Prolonged periods of sitting at a desk and working on a computer., • Occasional standing and walking within the office., • Manual dexterity to operate a computer keyboard, mouse, and other office equipment., • Visual acuity to read screens, documents, and reports., • Occasional reaching, bending, or stooping to access file drawers, cabinets, or office supplies.

Job DescriptionJob OverviewSaronic is seeking a skilled Electrical Wiring Interconnection System Engineer, responsible for creating the interconnect architecture for marine platforms at scale. These designs serve as blueprints for manufacturing of harnesses. The role requires a strong understanding of manufacturing practices of individual harnesses and harness integration, excellent communication with electrical systems and mechanical engineers, and system schematic creation and change management. EWIS Engineers must also possess strong attention to detail, problem-solving skills, and the ability to work collaboratively with other team members to ensure that projects are completed efficiently and accurately.Responsibilities & Duties • Develop and maintain EWIS architectures, schematics, and harness assembly drawings in Zuken E3, ensuring drawings contain all information required for manufacturing and installation., • Use NX computer-aided design (CAD) software to route harnesses in 3D per design and installation standards., • Review and revise EWIS designs to meet project specifications and standards, including EMC/EMI, current-carrying capacity, voltage drop, and environmental/classification requirements., • Maintain up-to-date knowledge of industry and military standards such as IPC/WHMA-A-620, ABYC, ABS, and applicable MIL-STDs, and apply them consistently in design and documentation., • Provide technical support and troubleshooting during the construction of a harness, factory test, and integration into the vessel; lead root-cause analysis and corrective actions for nonconformances., • Plan and support verification and validation activities (continuity/insulation resistance, hipot, and harness test board checks) and document results for compliance and quality audits., • Communicate effectively with project managers, suppliers, and production stakeholders to coordinate build readiness, design-for-manufacture feedback, and schedule/risk mitigation.Qualifications & Skills, • Bachelor’s degree in Electrical Engineering, Mechatronics, or related field., • 5–10+ years of experience in EWIS design, harness engineering, or electrical integration within automotive, marine, or aerospace industries., • Proficiency in Zuken E3, Siemens Capital, or equivalent electrical design tools., • Experience using NX, CATIA, or SolidWorks Electrical for 3D harness routing and integration., • Strong understanding of electrical systems design principles, grounding/shielding practices, and connector standards., • Demonstrated ability to interpret and produce complex technical documentation, including schematics, BOMs, and installation drawings., • Deep familiarity with industry standards such as IPC/WHMA-A-620, ABYC, and ABS., • Proven ability to manage multiple projects and priorities in a fast-paced environment.Physical Requirements, • Prolonged periods of sitting at a desk and working on a computer., • Occasional standing and walking within the office., • Manual dexterity to operate a computer keyboard, mouse, and other office equipment., • Visual acuity to read screens, documents, and reports., • Occasional reaching, bending, or stooping to access file drawers, cabinets, or office supplies., • Lifting and carrying items up to 20 pounds occasionally (e.g., office supplies, packages). Benefits, • Medical Insurance: Comprehensive health insurance plans covering a range of services, • Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care, • Saronic pays 100% of the premium for employees and 80% for dependents, • Time Off: Generous PTO and Holidays, • Parental Leave: Paid maternity and paternity leave to support new parents, • Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses, • Retirement Plan: 401(k) plan, • Stock Options: Equity options to give employees a stake in the company’s success, • Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage, • Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office This role requires access to export-controlled information or items that require “U.S. Person” status. As defined by U.S. law, individuals who are any one of the following are considered to be a “U.S. Person”: (1) U.S. citizens, (2) legal permanent residents (a.k.a. green card holders), and (3) certain protected classes of asylees and refugees, as defined in 8 U.S.C. 1324b(a)(3).

Job Description Join our Team! We offer 100% employer-paid benefits and an opportunity to join a dynamic team working on cutting edge technologies! Acutronic is looking for a Systems and Mechanical Design Engineer III in Austin, TX. In this role, you will be responsible for ownership over customer-driven projects and New Product Introduction (NPI) efforts from proposal through qualification testing and production support. Our ideal candidate will have at least 7 years of relevant experience in a turbomachinery related field. Systems and Mechanical Design Engineer III Your Roles/Responsibilities: • Design, build, and test micro-turbine and turbo-generator systems, • Perform mechanical design and analysis of static and rotating hardware, utilizing metallic or composite materials, across both cold and hot sections of the engine, • Utilize Siemens Teamcenter and NX for modeling and drafting, adhering to the latest dimensional and tolerancing standards (ASME Y14.5), • Set up, execute, and review advanced analyses using tools like ANSYS, focusing on elastic or elastic-plastic behavior, blade and vane dynamics, rotor-dynamics, and thermals, • Iterate design concepts with a keen eye on driving cost reduction and enhancing value in the design, • Engage in customer-funded or internal projects, assisting in the drafting of proposals for customer projects, • Take on project management responsibilities for designing and producing engine systems, • Holistically manage component level and subsystem level hardware from digital (PLM) to physical (hardware test and verification), • Collaborate with other team members and subject matter experts to succeed in achieving program milestones, • Assist management in the prioritization of tasks and allocating resources; balancing project obligations, delivery milestones, and budget requirements while adhering to quality and functional specifications, • Provide expert advice to senior management on problem-solving and solution strategies Your Profile/Qualifications/Skills: • Bachelor of Science degree in Mechanical, Aerospace, and or equivalent Engineering from an accredited college or university required, • Masters degree, preferred, • At least seven years of experience in turbomachinery related field required, • A combination of education and experience will be considered We Offer: • Employer-paid medical, dental, and vision insurance, • 401k match, • Company-paid holidays and Paid-Leave Time, • 9/80 schedule About Acutronic: The Acutronic Group has a proud history of building technologies and teams that are crucial to the aerospace, defense, and transportation industries. Acutronic’s Simulation & Test Division is the global market leader in high-performance motion simulation and test equipment. Our rate tables and advanced centrifuges are used to test or calibrate inertial sensors, navigation systems, and stabilized electro-optics. Hardware-In-the-Loop motion simulators replicate the flight motion profiles and engagement scenarios of missiles. Geotechnical centrifuges and their related accessories are designed to study the behavior of structures, soil mechanics, and earthquakes. Our vibration test systems (shaker tables) allow users to carry out environmental tests to ensure the robustness or quality of manufactured products. The Division also develops and refurbishes stabilized or gimbaled-platforms utilized in applications such as tracking mounts, gun turrets, and directed-energy systems. Acutronic’s Aerospace Components Division manufactures specialty components for use on uncrewed aerial vehicles, land defense applications, and missile systems. These products are used on next-generation aerospace programs and include a range of electric power systems, servo-actuators, micro-turbines, and Hybrid-Electric-Propulsion-Systems. We offer standard products and excel at designing highly customized solutions for demanding mission requirements. The Acutronic Group employs approximately 300 employees across sites in Austin, Texas; Pittsburgh, Pennsylvania; Switzerland; Germany; France; and India. Acutronic Integrated Systems Inc. 3401 Ed Bluestein Blvd, Austin, TX 78721 acutronic.com +1 737 212 9013 Acutronic is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status. If you have a disability or special need that requires accommodation, please contact us at or phone 412.926.1200. Powered by JazzHR XjAMfzU0ef

Job DescriptionSaronic Technologies is a leader in revolutionizing defense autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations for the Department of Defense (DoD) through autonomous and intelligent platforms. Job OverviewThe Supplier Quality Engineer (Composites) is responsible for ensuring that composite hulls, structures, and components produced by suppliers meet Saronic’s quality, performance, and durability requirements. This role focuses on open-mold and closed-mold (e.g., hand layup, spray-up, vacuum infusion) composite manufacturing processes used in marine environments. The engineer will drive supplier quality performance, conduct audits and inspections, resolve nonconformance's, and implement data-driven improvements across the supply chain. Collaboration with internal teams, including design, engineering, quality, manufacturing, and supply chain, is essential to maintain high standards of workmanship and material integrity for mission-critical maritime systems.Responsibilities • Problem Solving & Root Cause Analysis and Corrective Actions, • Investigate supplier nonconformance's such as voids, delamination, resin-rich/lean areas, cosmetic defects, or dimensional deviations. Lead structured problem-solving using methods such as 8D, 5 Whys, Fishbone Diagrams, and FMEA to identify root causes and drive effective corrective and preventive actions. Verify corrective action effectiveness through follow-up inspections and process audits., • Technical Quality Control, • Validate and monitor supplier processes for composite part fabrication, including:, • Mold preparation, release application, and surface integrity, • Gelcoat and laminate layup consistency (resin-to-fiber ratios, air entrapment control), • Curing, demolding, trimming, and finishing, • Bonding and secondary assembly operations, • Dimensional and visual inspections (surface finish, thickness, weight verification) Implement and monitor key process metrics using statistical process control (SPC), • or capability studies. Ensure supplier adherence to Saronic workmanship and composite quality standards., • Supplier Quality Assurance (Audits & Assessments), • Plan and conduct supplier quality audits and process assessments for composite manufacturing operations. Evaluate compliance with relevant quality management standards (e.g., ISO 9001, AS9100) and marine composite best practices. Track supplier performance via scorecards (defect rates, on-time delivery, rework trends) and partner with suppliers to close quality gaps. Drive continuous improvement initiatives and verify corrective action completion., • Quality Documentation and Reporting, • Maintain detailed records of supplier audits, inspection results, corrective actions, and quality trends. Develop and deliver regular reports on supplier quality metrics and improvement status to management and cross-functional teams., • Cross-Functional Collaboration, • Work closely with engineering, procurement, and production teams to ensure material specifications, design requirements, and supplier capabilities are aligned. Provide technical guidance on composite layup strategies, bonding processes, and finishing methods. Support design for manufacturability (DFM) and quality (DFQ) reviews. Train internal and supplier personnel on composite quality standards, inspection techniques, and defect prevention., • Continuous Improvement Initiatives, • Lead or support Lean, Six Sigma, and Kaizen projects targeting improved composite process repeatability, reduced scrap, and enhanced material utilization. Collaborate with suppliers to implement standard work, visual controls, and other improved processes., • Risk Management and Compliance, • Identify potential risks in supplier quality or process capability and develop mitigation strategies. Ensure supplier adherence to Saronic’s material qualification, traceability, and documentation standards. Support compliance with applicable defense and marine quality requirements., • New Supplier Qualification, • Participate in the evaluation and qualification of new composite suppliers. Review manufacturing readiness, process control, material handling, and quality management systems. Conduct audits and first article inspections to ensure new suppliers meet Saronic’s standards for consistency, repeatability, and documentation.Qualifications, • Bachelor’s degree in Engineering, Materials Science, Manufacturing, or related field (or equivalent experience)., • 3+ years of experience in supplier quality, composites manufacturing, or marine production., • Strong understanding of open-mold composite manufacturing methods (hand layup, spray-up, vacuum infusion)., • Familiarity with marine composite materials such as fiberglass, carbon fiber, core materials, resins, and gelcoats., • Knowledge of quality management systems and methodologies (ISO 9001, AS9100, APQP, PPAP, FMEA, Control Plans)., • Demonstrated experience with supplier audits, process validation, and root cause analysis (8D, 5 Whys, Fishbone)., • Proficiency in SPC, inspection techniques, and data-driven quality metrics., • Excellent communication, problem-solving, and interpersonal skills for supplier and cross-functional engagement., • Proficiency with Microsoft Office Suite and familiarity with ERP or QMS software (SAP, Oracle, etc.)., • Ability to travel to supplier sites as needed.Preferred Qualifications, • Experience with advanced composite manufacturing methods (e.g., prepreg layup, autoclave, oven-cure, resin transfer molding)., • Certification in Quality or Supplier Management (CQE, Six Sigma Green/Black Belt, or similar)., • Experience in a regulated or defense-related industry (aerospace, marine, defense)., • Working knowledge of NADCAP, ASTM standards, or MIL-STD composite quality requirements.Physical Demands, • Prolonged periods of sitting at a desk and working on a computer., • Occasional standing and walking within the office., • Manual dexterity to operate a computer keyboard, mouse, and other office equipment., • Visual acuity to read screens, documents, and reports., • Occasional reaching, bending, or stooping to access file drawers, cabinets, or office supplies., • Lifting and carrying items up to 20 pounds occasionally (e.g., office supplies, packages).Benefits, • Medical Insurance: Comprehensive health insurance plans covering a range of services, • Saronic pays 100% of the premium for employees and 80% for dependents, • Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care, • Saronic pays 99% of the premium for employees and 80% for dependents, • Time Off: Generous PTO and Holidays, • Parental Leave: Paid maternity and paternity leave to support new parents, • Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses, • Retirement Plan: 401(k) plan, • Stock Options: Equity options to give employees a stake in the company’s success, • Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage

Job DescriptionAnalog/Mixed-Signal Verification Engineer focusing on high-performance analog-to-digital and digital-to-analog converters. Job responsibilities include the verification of analog and mixed-signal designs for high performance data converters, behavioral modeling, and customer support.Qualifications • 2+ years of experience in high-performance analog or mixed-signal IC development and verification in advanced CMOS processes, • Familiarity with high-speed, high-resolution analog-to-digital (ADC) or digital-to-analog (DAC) data converter design and building block circuits such as bandgap reference, op-amp, comparators, oscillators, DLL, PLL etc., • Strong intuitive and analytical understanding of transistor-level circuit design including noise and mismatch analysis, • Experience with analog and digital behavioral modeling and familiarity with behavioral Verilog / Verilog-A code, including wreals, • Familiar with Cadence schematic capture, virtuoso, Spectre and/or HSPICE circuit simulation tools, • Must be familiar with layout parasitic extraction tools and layout dependent impairments in advanced CMOS processes, • Must be able to work independently, create and adhere to schedules, • Must possess strong written and verbal communication skills with an ability to work with teams spread across geographic locations