Offres finishing à Anaheim, CaliforniaCréer des alertes d'emploi

Job Description Job Title: Drywaller Job Overview: The Drywaller is responsible for installing drywall panels to construct interior walls and ceilings. This includes measuring, cutting, installing, and finishing drywall materials to create smooth surfaces for painting or further finishing. A drywaller ensures that drywall is securely attached to framing and other structural components of the building. This is an onsite position, Monday- Friday and the hours are 6 AM- 2:30 PM Primary Responsibilities: • Install Drywall: Measure, cut, and install drywall sheets to walls, ceilings, or partitions., • Attach Drywall: Secure drywall panels to wood or metal framing using screws, nails, or adhesive., • Cut and Fit Drywall: Cut drywall to fit around doors, windows, outlets, and other openings., • Joint Finishing: Apply joint compound (mud) to seams and nail/screw heads to create a smooth surface., • Taping and Sanding: Apply drywall tape over seams, then sand and smooth compound to eliminate imperfections. When the need for drywalling is down, other duties will be assigned such as; • Frame walls and ceilings using appropriate construction materials, ensuring structural integrity and compliance with codes., • Painting interior walls, doors, cabinets., • Aluminum powder coat and stainless-steel food service assembly., • Hand tool use for assembling metal stud, trim, interior and exterior finishes and cabinetry., • Assist with inventory, receiving and shipping including palletizing, stacking, wrapping and moving material around the facility., • Available for installations when the rare need arises. 1-5 days over night., • Perform quality control checks on parts and materials entering or leaving the manufacturing facility., • Safety: Follow safety procedures and wear proper protective gear to avoid injury from tools and materials., • Experience: Prior experience in drywall installation or a related field is preferred., • Knowledge: Understanding of building codes, materials, and techniques for drywall installation., • Physical Stamina: Ability to lift heavy materials, work in awkward positions, and perform physical tasks for extended periods., • Attention to Detail: Precision in cutting, fitting, and finishing drywall to ensure quality results., • Tools Proficiency: Ability to use tools like utility knives, drills, sanding machines, and drywall lifts., • Teamwork: Ability to collaborate with other construction workers, such as carpenters and painters., • Standing, bending and lifting 50lbs+ of equipment at a time., • Positive attitude, reliability and willingness to work in a team environment as part of a growing company., • Clean driving record for 15% of travel a year for installations or service calls. Compensation: based on experience $22-$35 Applicants must be authorized to work in the U.S. and have proof to be considered for this position.

Job Description Position Description: Lube Technician Position Summary: Lube Technician is responsible for performing lube related services for customers in a professional and efficient fashion. Essential Duties and Responsibilities: • Devote himself/herself to insuring satisfaction to customers., • Determine management, production and quality requirements by asking questions and listening., • Attend company meetings as required., • Maintain a follow-up system that encourages follow through with assigned projects., • Establish personal performance goals that are consistent with company standards of productivity and devise a strategy to meet those goals., • Review and analyze actions at the end of each day, week, month, and year to determine how to better utilize time and plans more effectively., • Understand the terminology of the business and keep abreast of technology changes in products and services., • Know and understand the federal, state and local requirements which govern the company’s business., • Follow lawful directions from supervisors., • Understand and follow work rules and procedures., • Participate in performance management., • Interact well with others and be a positive influence on employee morale., • Uphold the company’s non-disclosure and confidentiality policies and agreements., • Work evening, weekend, and holiday work hours as required., • Performs lube oil filter services in a professional manner and performs vehicle inspections as required., • Provide excellent customer service for all customers whether external and internal, specifically offering dependable vehicle service., • Maintains equipment in good working condition and maintains the work area in a safe, clean and organized manner., • Receive service assignments from the service writer or service manager., • Have the 'lube' work finished within the allotted time. Set goals, develop skills and constantly increase efficiency skill level., • Maintain a clean, efficient work area and assist in keeping the shop neat and organized., • Make sure the proper paperwork is completed and filed after every job completion., • Keep your technical qualifications current by finishing any required training programs., • Take care that the vehicle is cleaner when the job is completed than when the customer dropped it off. Knowledge, Skills and Abilities Required: Educational: High school diploma or the equivalent. Experience: None. Special Skills (i.e., licenses, certifications, etc.): Ability to read and comprehend instructions and information. Professional personal appearance. Excellent communication skills. Ability to meet company's production and quality standards. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Demands and Working Conditions: Lube Technician will be required to move throughout the company facility throughout the shift, and may spend time outdoors in the weather and elements. Must be able to stand for prolonged periods, walk, bend/twist/stoop, kneel/squat, lift over 50 lbs., and reach overhead. THE ABOVE DECLARATIONS ARE NOT INTENDED TO BE AN “ALL-INCLUSIVE” LIST OF THE DUTIES AND RESPONSIBILITIES OF THE JOB DESCRIBED OR OF THE SKILLS AND ABILITIES REQUIRED TO PERFORM THE JOB. RATHER, THEY ARE INTENDED ONLY TO DESCRIBE THE GENERAL REQUIREMENTS OF THE JOB. Signature (Employee) Date Signature (Supervisor) Date

Job Description Job Title: CNC Operator – Furniture Manufacturing About the Role: A well-established custom furniture and manufacturing company in Fullerton is seeking an experienced CNC Operator skilled in both milling and lathe operations. This role is ideal for someone who takes pride in precision craftsmanship, enjoys hands-on work, and has a strong understanding of machining processes related to high-quality furniture components and metal parts. Position Overview: We are seeking a skilled CNC Operator to join our furniture manufacturing team. The CNC Operator will be responsible for setting up, programming, and operating CNC machinery to cut, drill, shape, and finish wood or composite materials used in furniture production. The ideal candidate will have hands-on CNC experience, strong attention to detail, and a commitment to quality craftsmanship. Key Responsibilities: • Set up and operate CNC machinery (routers, mills, saws, etc.) for furniture components., • Interpret blueprints, technical drawings, and CAD/CAM files to produce parts to specification., • Load raw materials and monitor machine operations to ensure accuracy and efficiency., • Perform routine maintenance, cleaning, and minor repairs on CNC equipment., • Inspect finished components for quality, accuracy, and proper tolerances., • Adjust machine settings and tooling to optimize production output., • Maintain detailed production records, including material usage and output., • Follow all safety procedures and maintain a clean, organized work environment., • Collaborate with designers, engineers, and production staff to resolve issues and improve processes. Qualifications: • High school diploma or equivalent (technical or trade school preferred)., • 2+ years of CNC machine operation experience, preferably in wood or furniture manufacturing., • Strong knowledge of CNC programming (G-code, CAM software, or related)., • Ability to read and interpret technical drawings, blueprints, and measurements., • Experience with woodworking tools, materials, and finishing processes is a plus., • Strong problem-solving skills and attention to detail., • Ability to lift 50 lbs. and stand for extended periods., • Commitment to workplace safety and quality standards. Preferred Skills: • Experience with cabinet/furniture production., • Familiarity with AutoCAD, SolidWorks, or other design software., • Knowledge of lean manufacturing and production efficiency methods. Schedule & Compensation: • Full-time, 1st Shift (Monday–Friday), • Competitive hourly rate based on experience, • Opportunity for overtime and long-term growthCompany DescriptionAt Partners Personnel, we deliver more to every employee and client we serve. Our team of staffing industry experts is dedicated to helping our employees advance their careers while connecting our clients with the nation’s top talent. Experience the difference of staffing made personal at Partners Personnel.At Partners Personnel, we deliver more to every employee and client we serve. Our team of staffing industry experts is dedicated to helping our employees advance their careers while connecting our clients with the nation’s top talent. Experience the difference of staffing made personal at Partners Personnel.

Job DescriptionSalary: $22-30 DOE POSITION: Production Technician Carpentry & Cabinetry Focus DESCRIPTION Capsule is hiring a Production Technician to join our team, reporting directly to the Director of Manufacturing. The primary responsibility of this role is woodworking, cabinetry, and laminate fabrication The ideal candidate will bring hands-on experience in carpentry and cabinet construction, with the ability to support secondary roles in general assembly, drywall, and food service equipment installation. This is a full-time onsite role, Monday through Friday, from 6:00 AM to 2:30 PM. Were looking for someone with a great work ethic, attention to detail, and a positive team-player attitude who can thrive in a dynamic production environment. PRIMARY RESPONSIBILITIES • Fabricate, assemble, and install custom cabinets and laminate surfaces using woodworking machinery and hand tools, • Cut, shape, and finish wood and laminate components according to technical drawings and shop specifications, • Perform edge banding, routing, and fitting of cabinet hardware, • Ensure high-quality fit and finish of all cabinetry and millwork, • Interpret and work from shop drawings and assembly diagrams ADDITIONAL RESPONSIBILITIES • General framing, wall board, insulation, and panel installation, • Aluminum powder coat and stainless-steel food service assemblies, • Installation of food service and commercial/residential appliances, • Measure, cut, and install drywall sheets, • Apply joint compound, sand, and prep surfaces for finishing, • Use of hand tools to assemble metal studs, trims, finishes, and cabinetry, • Perform basic warehouse support: shipping/receiving, palletizing, and material handling, • Conduct quality checks and final inspections on assemblies before shipment, • Maintain a clean and organized work area REQUIREMENTS • 25+ years of professional experience in carpentry, woodworking, or cabinet manufacturing, • Skilled in reading and interpreting construction drawings or shop plans, • Proficient in the use of woodworking tools, power tools, and measuring instruments, • Ability to stand, bend, and lift up to 50 lbs, • Positive attitude, reliability, and team-oriented mindset, • Valid drivers license with clean driving record for occasional travel (up to 15%) PREFERRED EXPERIENCE • Laminate fabrication and cabinet installation, • Plumbing, electrical, or tiling skills, • Experience with drywall, framing, and general construction NOTE: All applicants must be authorized to work in the U.S. and provide valid documentation upon request.

Job DescriptionSalary: $22-30 DOE POSITION: Production Technician Carpentry Finish & Painter Focus DESCRIPTION Capsule is hiring a Finish Carpenter / Production Technician to join our team, reporting directly to the Director of Manufacturing. The primary responsibility of this role is finishing carpentry and professional painting for custom-built units, service assemblies, and other customer projects. This position plays a critical role in delivering high-quality finishes that meet customer specifications and aesthetic standards. This is a full-time onsite role, Monday through Friday, from 6:00 AM to 2:30 PM. Were looking for someone with a great work ethic, attention to detail, and a positive team-player attitude who can thrive in a dynamic production environment. PRIMARY RESPONSIBILITIES • Perform high-quality finish carpentry, including trim work, cabinetry, doors, and detailed wood installations., • Apply professional-grade paint and finishes to wood, metal, drywall, and other surfaces to a clean, consistent standard., • Frame walls and ceilings using proper construction methods and materials., • Install tape, mud, sand, and prepare drywall surfaces for painting and finishing., • Interpret construction drawings and specs to complete detailed interior finish work., • Assist in fabricating and assembling interior and exterior architectural features., • Support general production needs, including:, • Aluminum powder coat and stainless-steel food service assemblies, • Commercial/residential appliance installation, • Measuring, cutting, and fitting materials, • Assist with facility needs as required: cleaning, organizing, assembly support, deliveries, etc., • Maintain clean, safe, and organized workspaces. REQUIREMENTS • 35+ years of finished carpentry and/or painting experience in a construction or manufacturing environment., • Strong attention to detail and craftsmanship in finishing work., • Comfortable with hand tools, power tools, and production machinery., • Ability to read and interpret construction plans or technical drawings., • Able to lift 50 lbs., stand for extended periods, bend, reach, and work in varied conditions., • Positive attitude, reliability, and strong communication skills., • Valid drivers license and clean driving record (some travel required up to 15%). PREFERRED SKILLS • Drywall repair and installation, • Cabinet installation or custom woodwork, • Light plumbing or electrical experience, • Tiling or flooring work, • Spray or brush painting expertise NOTE: All applicants must be authorized to work in the U.S. and provide valid documentation upon request. Production Technician

Job DescriptionSalary: 22-35 Job Title: Drywaller Job Overview: The Drywaller is responsible for installing drywall panels to construct interior walls and ceilings. This includes measuring, cutting, installing, and finishing drywall materials to create smooth surfaces for painting or further finishing. A drywaller ensures that drywall is securely attached to framing and other structural components of the building. This is an onsite position, Monday- Friday and the hours are 6 AM- 2:30 PM Primary Responsibilities: • Install Drywall: Measure, cut, and install drywall sheets to walls, ceilings, or partitions., • Attach Drywall: Secure drywall panels to wood or metal framing using screws, nails, or adhesive., • Cut and Fit Drywall: Cut drywall to fit around doors, windows, outlets, and other openings., • Joint Finishing: Apply joint compound (mud) to seams and nail/screw heads to create a smooth surface., • Taping and Sanding: Apply drywall tape over seams, then sand and smooth compound to eliminate imperfections. When the need for drywalling is down, other duties will be assigned such as; • Frame walls and ceilings using appropriate construction materials, ensuring structural integrity and compliance with codes., • Painting interior walls, doors, cabinets., • Aluminum powder coat and stainless-steel food service assembly., • Hand tool use for assembling metal stud, trim, interior and exterior finishes and cabinetry., • Assist with inventory, receiving and shipping including palletizing, stacking, wrapping and moving material around the facility., • Available for installations when the rare need arises. 1-5 days over night., • Perform quality control checks on parts and materials entering or leaving the manufacturing facility., • Safety: Follow safety procedures and wear proper protective gear to avoid injury from tools and materials., • Experience: Prior experience in drywall installation or a related field is preferred., • Knowledge: Understanding of building codes, materials, and techniques for drywall installation., • Physical Stamina: Ability to lift heavy materials, work in awkward positions, and perform physical tasks for extended periods., • Attention to Detail: Precision in cutting, fitting, and finishing drywall to ensure quality results., • Tools Proficiency: Ability to use tools like utility knives, drills, sanding machines, and drywall lifts., • Teamwork: Ability to collaborate with other construction workers, such as carpenters and painters., • Standing, bending and lifting50lbs+ of equipment at a time., • Positive attitude, reliability and willingness to work in a team environment as part of a growing company., • Clean driving record for 15% of travel a year for installations or service calls. Compensation: based on experience $22-$35 Applicants must be authorized to work in the U.S. and have proof to be considered for this position.

Job Description POSITION SUMMARY: Under the direction of the department Supervisor, the Masker is responsible for applying tape to product parts prior to applying metal finishing chemical and trim tape on parts with a variety of different equipment and tools. ESSENTIAL DUTIES & RESPONSIBILITIES: • Identifies, cuts and applies silicone, masking tape or other specialized tape to use during the masking of specific parts from work order forms., • Places parts on and off racks as needed., • Prepares and packages parts for shipping., • Adheres to safety regulations., • Performs other duties as assigned. QUALIFICATIONS & REQUIREMENTS: • Ability to pay attention to detail and follow precise instructions., • Ability to apply tape to all parts., • Comfortable using basic tools., • Comfortable around chemical environment. ITAR REQUIREMENT: Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident). PHYSICAL DEMANDS: • Sitting/Standing for prolonged periods of time, • Ability to lift up to 20 lbs., • Comfortable being exposed heat, noise and chemical fumes while in production areas., • Good hand and eye coordination and movement. We are an Equal Opportunity and Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state or local laws. 6:00AM - 2:30PM

Job Description KARMAN SPACE & DEFENSE: Karman is the market leading suppliers of metallic and composite flight hardware and sub-assemblies for the space, missile, and hypersonic markets. Karman offers an unprecedented capability set to customers, creating a supply chain solution in a historically fragmented supply base. The Karman team draws on in-house expertise in engineering & design, precision machining, large part forming, welding, heat age, finishing, assembly, ablative & insulative composites, and other capabilities to serve as a strategic partner to customers. Karman is headquartered in greater Los Angeles and currently has 5 locations in Southern California, 1 location in Mukilteo, Washington and 1 location in Wilsonville, Oregon. DUTIES/RESPONSIBILITIES: • Manage the implementation and management of EHS programs, processes, systems, compliance plans, and initiatives., • Lead investigation and response to all division incidents, near misses, and property damage incidents., • Drive corrective actions to completion to minimize future exposure and proper records/documents are maintained., • Coordinate and conduct compliance monitoring activities including storm water sampling, industrial hygiene monitoring, air quality monitoring, and hazardous waste monitoring., • Responsible for review and maintenance of SDS records and approval of new products before products are allowed in the plant, • Oversee Emergency Response Team during emergency evacuations and other plant emergencies, • Provide EHS solutions, programs, best practices and guidance to functional and operational teams, site operations management to effectively manage compliance assurance and EHS risk mitigation., • Be a resource for employees regarding EHS related concerns, providing guidance and recommendations for safety work practices., • Establish universal EHS training programs that support the operational needs at all employee levels., • Standardize inspection programs focused on eliminating safety, health, and environmental risk., • Develop and maintain EHS data retention procedures across the organization., • Oversee hazardous waste management programs and annual reporting requirements., • Support all external EHS audits and assessments., • Oversee third party EHS reporting requirements – generating reports and documentation as necessary., • Performs other related duties as assigned. REQUIRED SKILLSET: • Extensive knowledge of environmental safety regulations and policies, • Extensive knowledge of EHS laws and regulations (Cal OSHA, EPA, DTSC, SCAQMD, Waterboard, etc.), • Excellent analytical and problem-solving skills, • Excellent written and verbal communication skills, • Excellent organizational skills and attention to detail, • Proficient in technology and equipment used in safety and environmental inspections., • Proficient in Microsoft Office Suite or similar software EDUCATION & EXPERIENCE: • Bachelor's degree in safety science, industrial engineering, or industrial hygiene preferred or equivalent experience with specialized training., • Three to five years of related experience preferred., • HAZWOPER, CPR/First Aid training preferred. PHYSICAL REQUIREMENTS: • Standing/walking for extended periods (up to 6-8 hours per day) throughout manufacturing facilities during inspections and audits, • Ability to climb stairs and ladders to access equipment and work areas, • Occasional lifting and carrying of up to 40 pounds (equipment, sampling devices, etc.), • Bending, stooping, and kneeling to collect samples and inspect machinery, • Manual dexterity and hand-eye coordination to operate testing equipment and safety devices, • Ability to wear and tolerate personal protective equipment (PPE) for extended periods, • Visual acuity to detect safety hazards, read gauges, and identify potential issues, • Verbal communication skills to effectively convey safety instructions in potentially noisy environments ENVIRONMENTAL HAZARDS: • Exposure to manufacturing noise levels potentially requiring hearing protection, • Potential exposure to chemicals, dusts, fumes, and vapors (with appropriate PPE and monitoring), • Exposure to moving machinery and equipment, • Exposure to variable lighting conditions from bright outdoor areas to dimly lit confined spaces, • Possible work in confined spaces requiring specialized training and equipment, • Potential for slips, trips, and falls on wet or uneven surfaces, • Exposure to weather conditions when performing outdoor inspections Equal Opportunity Karman is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis (“protected class”) including, but not limited to race; color; religion; genetic information; national origin; sex; pregnancy, childbirth, or related medical conditions; age; disability; citizenship status; uniform servicemember status; or any other protected class under federal, state, or local law. Our management is dedicated to ensuring the fulfillment of this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, termination, recruitment advertising, pay, and other forms of compensation, training, and general treatment during employment.

Job Description POSITION SUMMARY: Under the direction of the department Supervisor/Manager, the Painter is responsible for coating surface parts, assembling and finishing products with protective or decorative materials such as paint, varnish, enamel, lacquer, dope or stain using spray gun. ESSENTIAL DUTIES & RESPONSIBILITIES: • Determines and selects correct mixes of coating material., • Applies paint to parts as directed by job orders., • Identifies and coats areas that are inaccessible to hand sprayer., • Identifies problems with equipment and will troubleshoot or repair paint guns., • Responsible for running ovens as needed., • Will complete visual inspection of masking on parts to ensure consistency as well as inspect for damaged product., • Completes necessary paperwork., • Works closely with the production team and assist as needed., • Adheres to safety regulations., • Performs other duties as assigned. QUALIFICATIONS & REQUIREMENTS: • Ability to communicate, read, and understand English., • Basic math skills., • Experience using and troubleshooting gravity spray gun., • Previous experience in aerospace industry or automotive repair, a plus., • Ability to effectively communicate both verbally and in writing with team members at all levels in the organization. ITAR REQUIREMENT: Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident). PHYSICAL DEMANDS: • Walking/Standing for prolonged periods of time, • Ability to lift up to 30 lbs, • Exposed heat, noise and chemical fumes while in production areas, • Good hand and eye coordination and movement We are an Equal Opportunity and Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state or local laws. 5:00AM -1:30PM

Job Description POSITION SUMMARY: Under the direction of the department Supervisor/Manager, the Painter is responsible for coating surface parts, assembling and finishing products with protective or decorative materials such as paint, varnish, enamel, lacquer, dope or stain using spray gun. ESSENTIAL DUTIES & RESPONSIBILITIES: • Determines and selects correct mixes of coating material., • Applies paint to parts as directed by job orders., • Identifies and coats areas that are inaccessible to hand sprayer., • Identifies problems with equipment and will troubleshoot or repair paint guns., • Responsible for running ovens as needed., • Will complete visual inspection of masking on parts to ensure consistency as well as inspect for damaged product., • Completes necessary paperwork., • Works closely with the production team and assist as needed., • Adheres to safety regulations., • Performs other duties as assigned. QUALIFICATIONS & REQUIREMENTS: • Ability to communicate, read, and understand English., • Basic math skills., • Experience using and troubleshooting gravity spray gun., • Previous experience in aerospace industry or automotive repair, a plus., • Ability to effectively communicate both verbally and in writing with team members at all levels in the organization. ITAR REQUIREMENT: Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident). PHYSICAL DEMANDS: • Walking/Standing for prolonged periods of time, • Ability to lift up to 30 lbs, • Exposed heat, noise and chemical fumes while in production areas, • Good hand and eye coordination and movement We are an Equal Opportunity and Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state or local laws. 7:00AM - 3:30PM

Job Description Express Lens Lab is currently seeking to hire lab technicians in both our surfacing and finishing departments. Responsibilities In this role, you will be responsible for performing optical laboratory duties, including adjusting, repairing, and fabricating eyeglassesAdjust, repair, and fabricate eyeglasses according to customer needsFollow technical instructions accurately and efficientlyMaintain up-to-date knowledge of optical laboratory processes and techniquesProvide excellent customer service and communication skillsUtilize appropriate tools and equipment to complete tasksEnsure accuracy of all products before releasing to customersMaintain a clean and organized working environmentAdhere to safety protocols and proceduresAssist other technicians with optical-related tasks, if needed | Job description We are currently seeking a highly motivated and detail-oriented Technician, Optical Laboratory to join our team at Express Lens Lab. In this role, you will be responsible for performing optical laboratory duties, including adjusting, repairing, and fabricating eyeglasses. The ideal candidate for this position will possess a combination of technical and customer service skills, as well as the ability to work in a fast-paced environment. If you have a passion for providing quality optical care and are ready to join a team of dedicated professionals, we encourage you to apply. Qualifications: Previous experience as an optical laboratory technician preferred Excellent customer service and communication skills Ability to work accurately and efficiently Working knowledge of optical laboratory processes and techniques Ability to read and follow technical instructions Ability to lift up to 25 pounds Responsibilities: Adjust, repair, and fabricate eyeglasses according to customer needs. Follow technical instructions accurately and efficiently. Maintain up-to-date knowledge of optical laboratory processes and techniques. Provide excellent customer service and communication skills. Utilize appropriate tools and equipment to complete tasks. Ensure accuracy of all products before releasing to customers. Maintain a clean and organized working environment. Adhere to safety protocols and procedures. Assist other technicians with optical-related tasks, if needed. Lift up to 25 pounds when necessary. Express Lens Lab, Inc. is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We do not discriminate based upon race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics

Job Description Pay: $50-60hr Work days - 1 day per week. Which day is negotiable. As a Hygienist at Nuvia Dental Implant Center you will The Dental Hygienist is a licensed oral health professional responsible for delivering preventive dental care, educating patients on oral hygiene, and supporting the dentist in diagnosing and treating oral conditions. The hygienist plays a key role in promoting lifelong oral health and ensuring a positive patient experience Responsibilities • Work in partnership with the doctor to capture exam information to be used for implant treatment planning, • Sets up the treatment area in accordance with patient procedures and established protocols., • Greets and comforts patients, assists them to the dental chair, and ensures they are properly covered and prepared for their hygiene appointment., • Responds to questions and requests from patients and staff, providing clear and helpful information., • Maintains dental hygiene instruments by sharpening, sterilizing, and selecting the appropriate tools for each procedure., • Chooses the necessary materials and equipment for each visit after assessing the patient’s oral health needs., • Performs dental cleanings by removing plaque, tartar, and stains from teeth, including areas below the gumline, around implant crowns/bridges, and beneath full-arch fixed implant restorations., • Screens for oral diseases by conducting oral cancer checks, palpating and visually inspecting gums and oral tissues, using probes to detect periodontal and peri-implant disease, assessing gum recession, and capturing and processing dental x-rays., • Prevents tooth decay by applying fluoride treatments and other cavity-preventing agents., • Supports patient comfort and function by creating temporary restorations, cleaning and polishing dentures and other removable appliances, placing and finishing amalgam fillings, and removing cement from crowns and bridges., • Assists the dentist in managing dental and medical emergencies by keeping CPR certification current, monitoring emergency medications and oxygen, and maintaining an up-to-date emergency contact list., • Instructs patients on oral hygiene practices, plaque control, and post-treatment care, and reminds them of upcoming hygiene appointments., • Records all dental hygiene services, including vital signs, medical and dental histories, and detailed chart notes in patient records., • Safeguards patient privacy and practice operations by keeping all information confidential., • Keeps the work area safe and sanitary by following all safety procedures and regulatory guidelines., • Upholds infection control standards to protect both patients and staff., • Ensures dental equipment is functioning properly by performing routine maintenance, following manufacturer guidelines, troubleshooting issues, arranging repairs, and monitoring equipment inventory and updates., • Manages dental supply inventory by tracking stock levels, anticipating needs, placing and following up on orders, and confirming deliveries., • Uses dental resources efficiently to achieve optimal results while minimizing waste., • Stays current in the field by attending continuing education courses, reading professional literature, building professional relationships, and participating in professional organizations., • Associate's or Bachelor's degree in Dental Hygiene from an accredited program, • Active state license to practice as a dental hygienist, • Deliver high-quality, transformative dental care that meets or exceeds patient expectations, • Achieve strong patient satisfaction, contributing to Nuvia’s 50,000+ 5-star Google reviews, • Generate consistent case outcomes through efficient workflows, • Contribute to the center’s clinical productivity, • Support Nuvia’s growth and reputation as a national leader in full arch dental implant services, • Foster a positive, collaborative work culture that aligns with Nuvia’s values of; patient obsession, operational excellence, MVP teamwork, radical responsibility and eagerness to invent.

Job Description Looking for skilled Drywall installer to add to our team. Applicant must have extensive drywall experience and be able to do all levels of drywall installation and finishing. Must have own truck and tools. Must have and be able to use a smart phone. Must be willing and able to pick up materials from store and deliver to job site and install. Must be willing to work alone if needed. Must be willing to follow company systems from start to finish of the project. Must be willing to travel from job to job if needed. High ethical attitude and transparency with the leadership team is a must. Being able to follow detailed instructions as well as being able to get things done without supervision in a timely manner. Looking forward to hearing from you. Farley construction & Drywall. Company DescriptionWe work hard to bring quality installations to all of our clients in a timely manor.We work hard to bring quality installations to all of our clients in a timely manor.

Job DescriptionSalary: $22 Assist with painting sign panels, posts, and poles. Responsible for color matching, applying finishes, and supporting sign assembly. This role also provides backup support to others in the department as needed. ESSENTIAL DUTIES AND RESPONSIBILITIES • Clean panels and other surfaces to remove dust, grease, and rough edges before painting, • Mix paint according to established formulas and job specifications, • Match and mix custom paint colors as needed for different jobs, • Apply graffiti coating and back-paint acrylic pieces when required, • Assist with moving sign panels to and from the painters wall, • Keep a clean and organized work area, including tools and equipment, • Properly dispose of used rags and materials following safety procedures, • Maintain records of paint colors used, including color samples, job names, and dates, • Notify the department lead when paint inventory is low or materials need to be restocked, • Attend company and department meetings as required, • Support and uphold company's Core Values in all work performed, • Perform other related duties as assigned. QUALIFICATIONS, KNOWLEDGE, AND ABILITIES • 1+ year of experience in painting, color mixing, or working in a production or fabrication environment. Experience with painting with automotive-style paint guns and techniques., • Basic understanding of paint mixing and surface preparation techniques., • Ability to follow paint formulas and match colors accurately., • Comfortable using hand tools and cleaning equipment., • Ability to follow safety procedures, including proper disposal of materials like paint and rags., • Strong attention to detail, particularly in maintaining color consistency and ensuring high-quality finishing work., • Capable of lifting, moving, and positioning sign panels safely., • Basic recordkeeping skills for tracking paint formulas and job details., • Reliable attendance and ability to work independently or as part of a team., • Willingness to cross-train and assist in other duties as needed. Ability to write and speak simple sentences. MATHEMATICAL SKILLS: Ability to add and subtract two digit numbers and to multiply and divide with 10's and 100's. Ability to perform these operations using units of American money and weight measurement, volume, and distance. REASONING ABILITY: Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. CERTIFICATES, LICENSES, REGISTRATIONS: None required. PHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle, or feel; reach with hands and arms, and talk or hear. The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT: While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts; high, precarious places; and fumes or airborne particles. The noise level in the work environment is usually loud.

Job Description POSITION SUMMARY: Under the direction of the department Supervisor, the Masker is responsible for applying tape to product parts prior to applying metal finishing chemical and trim tape on parts with a variety of different equipment and tools ESSENTIAL DUTIES & RESPONSIBILITIES: • Identifies, cuts and applies silicone, masking tape or other specialized tape to use during the masking of specific parts from work order forms., • Places parts on and off racks as needed., • Prepares and packages parts for shipping., • Adheres to safety regulations., • Performs other duties as assigned. QUALIFICATIONS & REQUIREMENTS: • Ability to pay attention to detail and follow precise instructions., • Ability to apply tape to all parts., • Comfortable using basic tools., • Comfortable around chemical environment. ITAR REQUIREMENT: Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident). PHYSICAL DEMANDS: • Sitting/Standing for prolonged periods of time, • Ability to lift up to 20 lbs., • Comfortable being exposed heat, noise and chemical fumes while in production areas., • Good hand and eye coordination and movement. We are an Equal Opportunity and Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state or local laws. 7:00AM - 3:30PM

Job Description SUMMARY: The Deburr Technician is part of the production and finishing team. You will typically work on the manufacturing floor as a piece of the post-production team. Your job is to perform an inspection and remove burrs from products after production so that you can finish these products properly. A burr is a ridge that is often left on a product by machines during the manufacturing process. About us: Karman Space & Defense provides concept-to-production solutions for mission-critical systems on spacecraft, launch vehicles, missiles, hypersonics, and integrated defense systems. We believe that solving the industry’s most complex and mission-critical challenges requires relentless determination and a willingness to push the boundaries of possibility. Karman Space & Defense brings to bear unparalleled production capabilities, unmatched engineering expertise, and unflinching analysis to render the impossible, possible. Location: Santa Ana, CA Compensation & Benefits • Medical, Dental, Vision, • Company Paid Life Insurance, • 401(k) Retirement Savings Plan, • Paid Time Off (PTO), • Paid Holidays, • Tuition Reimbursement* WHAT YOU WILL DO • Deburr and process machined valve components in post machining, • Chase machine cut threads to size if necessary, • Polish tight tolerance surface finishes and inspect with profilometer, • Wash parts that have gone through deburr process and passivate using citric passivation process when required, • Assist with material inventory and prep for machining processes, • Operate a mass finishing barrel tumbler using given recipes for specific parts and materials, • Meet expectations for productivity and production goals, • Maintain a clean and efficient work environment, • Constantly keep products moving and alert management when production is inhibited, • Provide continuous ideas for process improvements WHAT WE ARE LOOKING FOR • High school diploma or equivalency certificate, • 1+ years of professional work experience in a factory or production environment KNOWLEDGE & SKILLS • 1+ years of deburr experience using various deburr techniques using manual and automated equipment is preferred, • Experience working in a machine shop, • Experience with basic blueprint reading, • Knowledge of CNC machining, • Experience using various measuring instruments such as micrometers, calipers, profilometers, and borescopes PHYSICAL REQUIREMENTS • Operating machinery from a standing position, • Constantly positions self to operate machinery in a variety of configurations., • Constantly visually inspect parts, • Occasionally lifts and/or moves up to 30 pounds Equal Opportunity Employer Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. Karman is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis (“protected class”) including, but not limited to race; color; religion; genetic information; national origin; sex; pregnancy, childbirth, or related medical conditions; age; disability; citizenship status; uniform servicemember status; or any other protected class under federal, state, or local law.Our management is dedicated to ensuring the fulfillment of this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, termination, recruitment advertising, pay, and other forms of compensation, training, and general treatment during employment.

Job Description About us: Karman Space & Defense provides concept-to-production solutions for mission-critical systems on spacecraft, launch vehicles, missiles, hypersonics, and integrated defense systems. We believe that solving the industry’s most complex and mission-critical challenges requires relentless determination and a willingness to push the boundaries of possibility. Karman Space & Defense brings to bear unparalleled production capabilities, unmatched engineering expertise, and unflinching analysis to render the impossible, possible. We are looking for Assemblers! Pay: 16hr-17hr DOE Location: Brea, CA KNOWLEDGE AND SKILL REQUIREMENTS: • Ability to use hand tools, • Able to use appropriate measuring devices, such as calipers, micrometers, height gages, plug gages, etc., • Maintain a clean work area daily as required, • Must work closely with the CNC Programmer MUST BE ABLE TO TRAIN ON THE 1st SHIFT AND TRANSITION TO 2nd SHIFT COMPANY BENEFITS: • Medical, • Dental, • Vision, • Life, • 401k, • Tuition Reimbursement, • Paid Holidays, • Employee Referral Program If an exciting career in the Space & Defense Industry is for you, we'd LOVE to talk to you! KARMAN SPACE & DEFENSE: Karman is the market leading suppliers of metallic and composite flight hardware and sub-assemblies for the space, missile, and hypersonic markets. Karman offers an unprecedented capability set to customers, creating a supply chain solution in a historically fragmented supply base. The Karman team draws on in-house expertise in engineering & design, precision machining, large part forming, welding, heat age, finishing, assembly, ablative & insulative composites, and other capabilities to serve as a strategic partner to customers. Karman is headquartered in greater Los Angeles and currently has 5 locations in Southern California and 1 location in Mukilteo, Washington. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. Karman is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis (“protected class”) including, but not limited to race; color; religion; genetic information; national origin; sex; pregnancy, childbirth, or related medical conditions; age; disability; citizenship status; uniform servicemember status; or any other protected class under federal, state, or local law. Our management is dedicated to ensuring the fulfillment of this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, termination, recruitment advertising, pay, and other forms of compensation, training, and general treatment during employment.

Job Description QUALIFICATIONS: • Must be able to work from Mon–Fri from 7:00 am - 4:00 pm, • Bachelor’s degree (BS/BA) in Mechanical Engineering from an ABET-accredited., • Minimum of twelve (12) years of product design experience; minimum eight (8) years of engineering project management experience and six (6) years of engineering management experience supervising technical professionals; and, • Experience leading engineering teams responsible for designing engineered products for customers., • Demonstrated experience resolving technical problems associated with company products, managing multiple technical projects, and working with customer personnel in defining design parameters., • Experience working with metallic materials, metal fabrication processes, and metallic material finishing., • Maintain overall technical ownership/authority and lead the team engaged in the design and development of company products in accordance with customer requirements, specifications, and company policies., • Facilitate the communication and interaction among the team members and those outside the team by advocating and fostering cross-functional teamwork using team-based management and leadership concepts, such as open communication, concurrent engineering, and continuous improvement., • Plan, organize, schedule, and manage activities, and provide technical guidance to the team in the design and development of new products or the improvement of legacy products. This includes various engineering development activities to ensure that the goals, objectives, and deliverables of each program/project are accomplished., • Participate in activities to enhance the engineering department efficiency and productivity with a focus on improving product development speed and overall time to market. This may include conducting technical studies to develop improved and state-of-the-art engineering techniques, processes, policies, and standards in areas such as the design process, documentation, testing, fabrication methodology, and transfer to production., • Responsible for supporting the sale and marketing of company products by analyzing customer requirements, providing special technical analyses, and resolving special customer problems and requirements. In addition, work closely with the product team, Sales and Marketing, and customers to develop innovative, cost effective, producible product design solutions., • Participate in activities to enhance company productivity and improve overall company performance with a focus on improving speed and overall time to market to continue Hartwell’s reputation as a value-added partner., • Provide timely technical guidance and support to Operations on production issues with new and legacy products, and provide assistance in resolving difficult technical problems., • Assist in the preparation of periodic design meetings in accordance with the contract and/or other program or company requirements., • Determine the direction of highly complex design solutions and make decisions on standard and complex design approaches., • Review, analyze, and interpret the technical and administrative requirements contained in requests for proposal (RFP), requests for quotation (RFQ), requests for information (RFI), information for bid (IFB), etc., to prepare material used in the preparation of formal responses., • Write, edit, and review technical proposals in response to a RFP, RFQ, RFI, and IFB. Identify program tasks and prepare associated cost estimates., • Build and lead a dynamic team, and set the pace and example as the leader. Provide employee coaching, mentoring, and training and development to further build and strengthen the culture of the team., • Conduct performance appraisals, and provide recommendations on personnel placement, discipline, and wage increases., • Provide input to the engineering department CAPEX and expense budgets., • Assist in the preparation and managing of engineering manpower requirements., • Support the development of long and short-term goals and objectives within the engineering department and ensure they are aligned with the overall company goals and objectives., • Work with Operations to ensure product designs are producible (design for manufacturability)., • Identify new and/or opportunistic applications and ideas in addition to cultivating relationships with current and target customers. Create innovative and proprietary technology and product platforms using focused resources and cross-functional teamwork.Company DescriptionAmtec's Direct Hire Team provides specialized, in-depth expertise in sourcing and placing top talent. Leveraging decades of experience since 1959, we focus on aligning employees with companies' unique cultures and goals.Amtec's Direct Hire Team provides specialized, in-depth expertise in sourcing and placing top talent. Leveraging decades of experience since 1959, we focus on aligning employees with companies' unique cultures and goals.

Job Description Aluminum extrusion and building products manufacturing corporation with locations in 3 states is seeking a Corporate Controller to lead the closing process for several business units, work closely with other accounting personnel on quarterly corporate consolidations, and taking the lead on tax related special projects. Position requires a highly motivated and experienced team player with strong accounting management skills. Position will supervise preparation and review of monthly financial statements, AR/AP and payroll functions. Please forward salary expectations. Job Responsibilities: Monthly Closing of Books for Three Corporate Divisions · Preparation of financial package · Review of AP and Receiving Transactions · Review monthly inventories with cost accountant · Monthly bank reconciliations Collaborate with CFO and other accounting staff · Coordinate with team to resolve open accounting issues and close periods promptly · Assist more junior staff with account reconciliation and financial statement preparation · Work with Cost Accountant on material cost issues and year-end inventory results. · Review & Advise on Monthly Payroll Journals from Payroll Manager · Participate in multi-site physical inventory each Nov 30th. Assist Outside Auditor on Periodic Financial Issues · Review and advise on quarterly intercompany sales & purchases elimination · Reconcile year end and mid-year intercompany receivables and payables File Monthly & Quarterly Returns for Sales & Use Tax · Returns need to be filed in at least 5 states for multiple companies · Lead the response to any potential audits that arise Manage Special Projects as they arise · Liaison for state sales tax audits · Assist auditor with federal and state audits · Review annual property tax data for submission to property tax consultant · File periodic business license registration renewals at city and state level · Assist with system change overs and development of critical financial reports. Requisite skills should include: Experience in an automated financial environment, ERP and Cost Accounting programs Oracle E-Business Suite experience a plus Familiarity with personal property and sales/use tax return preparation Good communication skills & demonstrated ability to work well with others A Bachelors degree and accounting education is required Masters Degree in Accounting, CPA, CFA or another financial accreditation strongly preferred. Company DescriptionFOR MORE THAN 75 YEARS, Universal Molding Company has provided quality metal roll forming, fabrication, extrusion, and finishing to customers in a wide range of industries. We have earned a reputation for superior workmanship, competitive pricing, and incomparable service. Our "One-stop Shop" ensures that customer orders meet the highest expectations. We utilize equipment designed for the ultimate in accuracy and precision. This mix of dependable machinery, skilled engineering support, turnkey operations and friendly, knowledgeable customer service is how we deliver the best possible product, hassle free and on time. -\tFull modern production facilities -\tOne-stop operation- saves time, money and hassles -\tFriendly, knowledgeable people -\tAdvanced engineering, research, and development -\tRigid quality control -\tWarehousing service availableFOR MORE THAN 75 YEARS, Universal Molding Company has provided quality metal roll forming, fabrication, extrusion, and finishing to customers in a wide range of industries. We have earned a reputation for superior workmanship, competitive pricing, and incomparable service. Our "One-stop Shop" ensures that customer orders meet the highest expectations. We utilize equipment designed for the ultimate in accuracy and precision. This mix of dependable machinery, skilled engineering support, turnkey operations and friendly, knowledgeable customer service is how we deliver the best possible product, hassle free and on time.\r\n•\tFull modern production facilities \r\n•\tOne-stop operation- saves time, money and hassles \r\n•\tFriendly, knowledgeable people \r\n•\tAdvanced engineering, research, and development \r\n•\tRigid quality control \r\n•\tWarehousing service available

Job Description POSITION SUMMARY: Under the direction of the department Supervisor, the Masker is responsible for applying tape to product parts prior to applying metal finishing chemical and trim tape on parts with a variety of different equipment and tools ESSENTIAL DUTIES & RESPONSIBILITIES: • Identifies, cuts and applies silicone, masking tape or other specialized tape to use during the masking of specific parts from work order forms., • Places parts on and off racks as needed., • Prepares and packages parts for shipping., • Adheres to safety regulations., • Performs other duties as assigned. QUALIFICATIONS & REQUIREMENTS: • Ability to pay attention to detail and follow precise instructions., • Ability to apply tape to all parts., • Comfortable using basic tools., • Comfortable around chemical environment. ITAR REQUIREMENT: Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident). PHYSICAL DEMANDS: • Sitting/Standing for prolonged periods of time, • Ability to lift up to 20 lbs., • Comfortable being exposed heat, noise and chemical fumes while in production areas., • Good hand and eye coordination and movement. We are an Equal Opportunity and Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state or local laws. 7:00AM - 3:30PM

Job Description Summary: Reliable and hardworking laborer with experience in warehouse, manufacturing, and painting environments. Skilled in material handling, equipment support, and maintaining safety and cleanliness in fast-paced production settings. Committed to teamwork, quality, and workplace safety. Key Duties and Responsibilities 1. Painting & Finishing Support • Assist painters with preparation, painting, and finishing processes., • Rack, hang, and organize parts for coating, drying, and curing., • Work inside paint booths, following all safety and ventilation procedures., • Wear full PPE (respirator, coveralls, gloves, boots, and eye protection) at all times., • Clean and maintain painting booths, tools, and equipment after each shift. 2. Material Handling & Warehouse Tasks • Load and unload raw materials, components, and finished products., • Move materials safely using pallet jacks, carts, or forklifts (if certified)., • Organize and store items properly to support efficient workflow., • Prepare materials for production or shipment by labeling, wrapping, and stacking. 3. Production & Manufacturing Assistance • Supply raw materials and components to production lines., • Assist machine operators with setup, operation, and cleaning., • Perform basic quality checks on materials and finished goods., • Report defective or damaged products to supervisors. 4. Safety, Sanitation & Compliance • Follow all company safety policies, OSHA regulations, and PPE requirements., • Keep work areas clean, organized, and free of hazards., • Handle chemicals and paint materials safely according to company procedures., • Participate in safety meetings and follow all lockout/tagout or hazardous material protocols. 5. Teamwork & Communication • Work collaboratively with painters, warehouse staff, and supervisors to meet daily goals., • Communicate clearly about job status, material needs, or equipment issues., • Maintain a strong work ethic, punctuality, and positive attitude.Company DescriptionWe are a staffing agency dedicated to connecting top talent with leading companies in various industries.We are a staffing agency dedicated to connecting top talent with leading companies in various industries.

Job Description CertaPro Painters Responsibilities: • Wearing the proper professional Painter attire; white pants or white shorts and a CertaPro Painters shirt., • Keeping in regular communication with your Job Site Supervisor. This includes, but not limited to; know what jobs are next, what to do on days of inclement weather, etc., • Maintaining all equipment., • Dealing with or handling all reasonable requests from the customer., • Take care of all reasonable requests from your supervisor., • Attend all training sessions or company meetings as required., • Make sure you and the Team you are working with follow safe working practices., • Do good quality work and provide excellent service to all customers., • Prepares, primes, sands, seals, patches and paints furniture, surfaces, buildings, and fixtures utilizing all types of painting materials., • Tapes, flushes, repairs and applies texturing, acoustic layers on a variety of surfaces. Adjusts colors when necessary; utilizes enhanced finishing skills when appropriate., • Operates, cleans and maintains all painting equipment, including brush, roll, sprayers and electrostatic sprayers, pumps, etc. Safely stores and labels all materials., • Residential and Commercial Paint Projects

Job Description ROVING PAINTERS and PAINTER'S ASSISTANTS – ALL SKILL LEVELS WELCOME Company: Pan American Properties, Inc. Location: Roving – Orange County / Long Beach Region Department: Maintenance Employment Type: Full-Time, Non-Exempt Schedule: Monday – Friday, 8:00 AM – 4:30 PM Hourly Pay Range: $21.00 – $36.00/hour (Based on skill level – see breakdown below) Purpose Pan American Properties is a property management service provider, and we are actively seeking dependable Painters of all skill levels to join our growing roving maintenance team. This role plays a vital part in preserving the appearance, quality, and value of our residential properties throughout the Orange County and Long Beach region. Whether you're new to painting or bring years of hands-on experience, we’re looking for individuals who take pride in their craft, value precision, and are motivated to grow their skills. Duties and Responsibilities Painting Responsibilities * Prepare surfaces (sanding, patching, priming, taping, etc.) * Apply paint using brush, roller, or sprayer techniques * Mix and match paints for consistent finishes * Maintain and clean painting tools and equipment General Labor & Maintenance Support * Assist with job site setup and cleanup (drop cloths, scaffolding, etc.) * Support other minor maintenance or repair tasks as directed * Perform basic preventative maintenance when needed Safety & Work Order Execution * Use proper PPE and follow company safety procedures at all times * Safely handle and store paint and related chemicals * Complete assigned work orders on schedule and to quality standards * Communicate job progress and issues clearly to supervisor/team What We’re Looking For Experience * All experience levels encouraged to apply – from apprentice to master * Entry-level candidates should bring a willingness to learn and work hard * Experienced painters should demonstrate confidence in prep, finishing, and cleanup Skills & Traits * Strong attention to detail and a commitment to high-quality work * Ability to work independently with minimal supervision and contribute effectively as part of a team * Solid time management and organizational skills to prioritize and complete tasks efficiently * Basic knowledge of painting tools and techniques (advanced knowledge preferred for higher skill levels) * Ability to read, write, and speak in conversational English to follow work orders, communicate with team members, and interact with residents professionally Requirements * Must have valid CA driver’s license, reliable transportation, and proof of insurance * Must be legally authorized to work in the U.S. (E-Verify required) * Must pass background check and drug screening * Must be able to perform the physical demands of the role (lifting, bending, standing, reaching, etc.) Pay Breakdown (Hourly Rate Based on Experience & Proficiency): * Level 1 – Apprentice: $21.00–$24.00 * Level 2 – Assistant: $24.00–$26.00 * Level 3 – Pro: $27.00–$30.00 * Level 4 – Master: $31.00–$33.00 * Lead Painter (Crew Lead): $34.00–$36.00 Why Join Pan American Properties? At Pan American, you’re not just picking up a brush—you’re building a future. Whether you’re just starting out or bringing years of experience, you’ll be part of a trusted team that values craftsmanship, hard work, and the pride that comes from a job well done. 🎨 Sharpen Your Craft, Build Your Career Gain hands-on experience across a wide range of painting projects in occupied units, vacant turnovers, and property renovations. We promote from within and offer structured paths for advancement—your growth matters here. 🤝 Work with People Who Care Join a collaborative, supportive crew where teamwork isn’t just a buzzword. Our field leaders are responsive, respectful, and here to help you succeed. You’ll never be just a number. 💼 Enjoy Benefits That Have Your Back We offer a competitive benefits package designed to support your health, stability, and time away from the job: * Medical, Dental, and Vision Coverage * FSA & HSA Options * 401(k) with 4% Company Match * Paid Vacation, Sick Leave & Holidays * Paid Training & Skill Development * Employee Recognition Programs If you take pride in your work, show up ready to learn (or lead), and want to be part of a team that values effort and results—Pan American Properties is where your next chapter starts. Ready to Apply? If you're ready to grow your painting career and be part of a company that values hard work, attention to detail, and team collaboration, we want to hear from you. Apply today and bring your skills to a team that helps make communities feel like home. Pan American Properties, Inc. is proud to be an Equal Opportunity Employer. We are committed to fostering a diverse and inclusive workplace where every team member is valued and respected. Powered by JazzHR GBVVV8xazJ

Job Description Position: Paint Prepper Shop: Gabe’s GPS Location: Santa Ana, CA About Us Gabe’s Professional Auto Solutions is a high-end collision repair and aesthetic center, proudly serving as an authorized vendor for luxury EV brands in Orange County, CA. With over a decade of experience, Gabe’s is known for exceptional quality control, concierge-level service, and putting our customers first. For more information on Gabe’s GPS, visit our website at: Position Overview As a Paint Prepper, you’ll be a key member of the body shop team, tasked with preparing vehicles for paint repair and aesthetic finishing. This role is vital to achieving the flawless results that define Gabe’s reputation. Responsibilities · Surface preparation: Sanding, masking, taping, priming, and applying surface treatments to ensure vehicles are paint-ready. · Damage inspection & cleanup: Detecting imperfections, cleaning surfaces, and verifying readiness prior to paint application. · Material & tool handling: Managing prep materials (e.g., primers, masking supplies), using air tools safely, and maintaining an organized workspace. · Quality control: Collaborating with production colleagues to maintain high standards aligned with Gabe’s “eye for excellence” philosophy Gabe's Auto. · Safety & compliance: Adhering to all shop safety protocols, including use of PPE and handling of hazardous materials. · Documentation: Maintaining accurate prep logs and reporting any issues or deviations. Requirements · Experience in automotive paint preparation: Prior roles in auto body shops or collision centers strongly preferred. · Detail-Oriented: Able to spot and address minor flaws pre-paint. · Technically Proficient: Skilled in sanding, masking, taping, priming, and mixing for preparation. · Team Player: Comfortable coordinating with painters, detailers, and service crew. · Reliable & Responsible: On-time, safety-conscious, and committed to high standards. · Physical readiness: Ability to stand, kneel, and lift up to 50 lbs. Benefits · Paid Vacation · Paid Overtime · PTO according to California regulations · Competitive hourly pay · Paid training and continued development on high-end EV body work. · A company culture that values employee care, social initiatives, and exceptional customer experience

Job Description SPANISH: TÉCNICO DE DESBARBADO/ACABADO: (1er Turno) • Debe dominar el uso de una variedad de herramientas manuales como amoladoras, ruedas de banco y cuchillos desbarbadores., • Debe poder leer e interpretar dibujos., • Debe poder tabular en piezas de tolerancia estricta con alto acabado superficial. DEBURRING/FINISHING TECHNICIAN: (1st Shift) • Must be proficient using variety of hand tools such as grinder, benching wheel, deburring knives, • Must be able to read and interpret drawings, • Must be able to work on tight tolerance parts with high surface finish, • Familiar with different type of material including, Stainless Steel, and Aluminum.Company DescriptionWe are a Sheetmetal and CNC Maching Company that is AS9100 Certified.We are a Sheetmetal and CNC Maching Company that is AS9100 Certified.

Location: Huntington Beach, California Initial Contract Length: 6 - 12 Months with extension highly likely Contract Type: W2 – Inclusive of employment benefits Full-time contracted Hours: 8 Hours per day, 5 days per week + Optional Overtime Pay rate: Open & Flexible – Priority here is finding the right people As a Composites Technician, you’ll fabricate, assemble, and finish composite structures that make up our unmanned defence systems. You’ll support both rapid prototypes (where speed and adaptability are key) and production builds (where consistency and precision drive mission success). You’ll work shoulder-to-shoulder with engineers and fellow technicians, using advanced composite materials and processes to bring critical hardware to life. Key Responsibilities • Perform lay-up, bagging, curing, trimming, and finishing of composite parts using prepreg, wet layup, and resin infusion techniques., • Operate ovens and vacuum systems to cure composite structures., • Trim and machine cured composite assemblies to tight tolerances., • Drill, bond, fasten, and assemble composite substructures into final hardware., • Conduct in-process inspections, measuring tolerances and identifying defects., • Support prototype builds: adapting methods, iterating with engineers, and recording lessons learned., • Support production builds: following controlled work instructions, ensuring repeatability, and meeting takt time., • Handle sensitive materials and maintain clean work environments to prevent contamination., • Maintain tooling and fixtures, reporting wear, and supporting continuous improvement., • Uphold safety, quality, and documentation standards in line with defence hardware requirements. Basic Qualifications • High school diploma or equivalent, • 1+ years of hands-on composite fabrication in aerospace, defence, automotive, or marine applications., • Proficiency with hand tools, power tools, and precision measuring equipment., • Ability to read and interpret engineering drawings and work instructions., • Comfortable working in a fast-paced, high-expectation environment with tight tolerances., • Physical capability to lift 25+ lbs, stand for long periods, and work in cleanroom/controlled environments. Preferred Qualifications • Experience with prototype composite builds where processes are not fully defined., • Familiarity with structural bonding, secondary bonding, and composite repair., • Knowledge of defence or aerospace quality standards., • Cross-trained in related areas: paint, coatings, metallics, or assembly.

American Woodmark is one of the nation's largest cabinet manufacturers. By partnering with major home centers, builders, and dealers, we spark the imagination of homeowners and designer and bring their vision to life. Across our service and distribution centers, our corporate office and manufacturing facilities, you'll always find the same commitment to customer satisfaction, integrity, teamwork, and excellence. We are on a journey to encourage an inclusive Woodmark, and are taking meaningful actions to promote diverse representation across every part of the business. Together, every team member contributes to making American Woodmark a place where people can express who they are through what they do. POSITION PURPOSE: Overall coordination of all maintenance requirements to support meeting and/or exceeding established plant goals. IDEAL CANDIDATE PROFILE To perform this job successfully, an individual must be able to excel at the essential functions assigned. The requirements listed below are representative of the knowledge, skill and ability required. Experience • Minimum of 5 years of manufacturing maintenance experience; wood related preferred., • Minimum of 5 years of supervision experience; multiple departments, • Must have experience in material flows, continuous improvement practices; and process analysis. Skills • Excellent personal computer skills in a network environment; Microsoft products experience preferred - Outlook-Word-Excel, • Auto-Cad light proficient is a plus, • Track record of successful project management, • Experience in working in a team environment, • Management style must be consistent with CITE Principles, • Strong planning/Organization - Time Management skills, • Demonstrated problem solving skills Education • Undergraduate degree in Maintenance/Engineering or related discipline; extensive work experience may be considered in lieu of education. ESSENTIAL FUNCTIONS: • Overall coordination of Plant property and equipment maintenance., • Ensure the maintenance and safety of all assembly, milling, and finishing equipment., • Develops and maintains all preventive maintenance programs, • Maintains inventory of tools, parts, and supplies to support the plant and plant operations., • Plan and coordinate department's activities to support SQDC targets, and meet and/or exceed client and/or customer's expectations., • Actively participate on assigned teams and/or projects., • Ensure assigned departments perform tasks as outlined in Job Instruction Breakdowns, Quality Specifications, and Standard Operating Practices., • Participate in identifying hiring needs; employee selection and training process, • Provide communication on departmental expectations, motivates team members, and identifies opportunity for improvements., • Provide team leadership consistent with company vision, mission, CITE principles., • Ensures Policies are followed and provides guidance and discipline., • Effectively utilize all resources to maximum potential performance to achieve SQDC goals., • Establishes individual goals for team members in alignment with overall organization goals and performs periodic performance reviews to determine progress., • Support and represent company as a union-free environment, • Provide a safe and productive work environment, including housekeeping., • Participate in the identification and implementation of continuous improvement initiatives, • Role model CITE and Working in Teams principles, • Perform other tasks as directed by direct supervisor, • Supervisory Responsibilities:, • Will supervise hourly and salaried employees in the assigned department and/or departments. Is responsible for the overall direction, coordination, and evaluation of direct reports. Carries out supervisory responsibilities in accordance with the organization's policies and applicable laws. Responsibilities include interviewing, hiring, and training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employee; addressing complaints and resolving problems. SCOPE - EXPECTATIONS: • Communications Skills:, • Ability to read, analyze, and interpret common business and technical journals and financial reports., • Ability to listen and communicate effectively with customers/clients in an effort to respond to common inquires or complaints from customers/clients, regulatory agencies, or members of the business community and public., • Ability to develop presentations to be delivered to production team, plant level team, or public groups., • Mathematical Skills:, • Ability to apply basic mathematical concepts like addition, subtraction, multiplication or division to basic manufacturing performance recording or financial performance recording., • Ability to read and use a tape measure., • Reasoning Ability:, • Ability to define problems, collect data, establish facts, and draw valid conclusions., • Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables., • Physical Demands:, • While performing the duties of this job, the employee is regularly required to stand and walk and talk or hear. The employee frequently is required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to lift up to 20 pounds., • Working Environment:, • Typical indoor manufacturing environment. The noise level is usually moderate to high and hearing protection may be required on the production floor. Safety glasses are required on the production floor. Some out-of-town travel is required. Occasional weekend work required., • Reports to: Maintenance Manager, • Recruitment process may consist of any combination of phone, video and in person interviews., • Offers may be contingent upon successful completion of Background Check, Drug Screen, Physical Examination and/or potential Motor Vehicle Check. BENEFITS PACKAGE INCLUDES: • Competitive Compensation, • Health Care Benefits, • Paid Holidays, • Paid Vacation Days, • Paid Sick Days, • 401(k) Match, • Tuition Assistance, • Relocation Assistance when available AN EQUAL OPPORTUNITY EMPLOYER The American Woodmark Corporation does not discriminate on the basis of race, color, national origin, ancestry, age, religion, military and veteran status, sex, gender, gender identity, gender expression, sexual orientation, genetic information, marital status, medical condition, pregnancy, or any other legally-protected characteristic; and it will comply with all applicable state discrimination laws. No person shall be denied employment solely because of any disability which is unrelated to the ability to engage in the essential functions involved in the position for which application has been made either with or without reasonable accommodations.

Job Description Job Title: MECHANICAL INSPECTOR/ CMM Programmer (Machine Shop Inspector) Department: QUALITY Reports To: QUALITY MANAGER FLSA Status: FULL TIME HOURLY $25.00-$40.00 DOE ** Sign on bonus of $1,000 after 6 months of employment and ANOTHER $1,000 after first year completion. Position Summary: Perform precision mechanical inspection and documentation verification of complex machined parts in a fast-paced AS9100 environment. Perform mid and final inspection processes. Must have good understanding of GD&T, shop math, blueprint reading, MS Office, and machining knowledge. You will be expected to interpret customer drawings, specifications and follow Travelers. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. · Must have a demonstrated proficiency with surface plates, height gauges, calipers, micrometers, profilometers and any inspection equipment found within an aerospace machine shop · Blueprint reading ability · Machine shop math knowledge · Perform First Article Inspection in Accordance with AS9102 · Thorough knowledge of GD&T · Report safety concerns to Inspection team or quality Manager · In – process inspect First Articles from machines · Collect Measurement data for FAI reports · Review routers to ensure that upstream operations have been completed and signed off · Collect and provide data required for critical part Final Inspection Reports (IPIRS) · Complete Discrepant Red Tags any forms required for rejected parts · Inspect Incoming and Outgoing materials for compliance, specifications, and conformance requirements. · Perform surface plate and complex setups • CMM Operating, Programming and Romer arm experience Required -PCDMIS Competencies: To perform the job successfully, an individual should demonstrate the following. Communications - Exhibits good listening and comprehension. Expresses ideas and thoughts in written form. Expresses ideas and thoughts verbally. Keeps others adequately informed. Selects and uses appropriate communication methods. Customer Service - Displays courtesy and sensitivity. Manages difficult or emotional customer situations. Meets commitments. Responds promptly to customer needs. Solicits customer feedback to improve service. Dependability - Commits to doing the best job possible. Follows instruction. Keeps commitments. Meets attendance and punctuality guidelines. Responds to requests for service and assistance. Takes responsibility for own actions. Planning & Organization - Integrates changes smoothly. Plans for additional resources. Prioritizes and plans work activities. Sets goals and objectives. Uses time efficiently. Works in an organized manner. Quality - Fosters quality focus in others. Improves processes. Measures key outcomes. Sets clear quality requirements. Solicits and applies customer feedback. Use of Technology - Adapts to new technologies. Demonstrates required skills. Keeps technical skills up to date. Troubleshoots technological problems. Uses technology to increase productivity. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience: High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience.3-5 years in Manufacturing preferred. Repeat or basic CMM operation desired along with Romer arm (PC-Dmis software). Language Ability: Read a limited number of two- and three-syllable words and recognize similarities and differences between words and between series of numbers. Write and speak simple sentences in the English Language. Mathematical Ability: Calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference and volume. Apply concepts of basic algebra and geometry. Reasoning Ability: Apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Deal with problems involving several concrete variables in standardized situations. Computer Skills: Intermediate Certificates and Licenses: None required, above experience needed. Supervisory Responsibilities: None Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. *Must be comfortable working in a Manufacturing environment with loud equipment and various materials. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. *Must be able to lift up to 50 Lbs. Must be able to identify different colors to identity finishing defects. The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor. **Companies governed by ITAR (International Trade and Arms Regulations) reserve the right to background check/and random drug testing for all applicants Powered by JazzHR vEOG1dRlLQ

Lead and coordinate the workflow for wet processing (e. Minimum 5 years of hands-on experience in aerospace metal finishing operations, including wet processing and painting. Knowledge of chemical handling and safety protocols for wet processing environments.

Job Description Position: Auto Body Buffer Shop: Gabe’s GPS Location: Santa Ana, CA About Us Gabe’s Professional Auto Solutions is a high-end collision repair and aesthetic center, proudly serving as an authorized vendor for luxury EV brands in Orange County, CA. With over a decade of experience, Gabe’s is known for exceptional quality control, concierge-level service, and putting our customers first. For more information on Gabe’s GPS, visit our website at: Position Overview As a Buffer, you’ll be a key member of the finishing team, responsible for polishing and perfecting the vehicle’s final surface after painting. This role ensures the delivery of flawless, high-gloss finishes that meet Gabe’s standard of excellence. Responsibilities · Polishing & Correction: Buff and polish painted vehicle surfaces to remove imperfections, swirl marks, and achieve a consistent high-gloss finish. · Final Finish Quality Check: Inspect vehicles for clarity, texture, and surface uniformity prior to delivery. · Tool & Product Management: Use appropriate compounds, pads, and tools while keeping the buffing area clean and organized. · Collaboration: Work closely with painters, detailers, and production leads to ensure consistent quality and workflow. · Safety & Compliance: Follow shop safety protocols including PPE use and proper handling of chemical products. · Light Detailing: Assist with final vehicle presentation, including wiping surfaces and removing dust or residue. Requirements · Experience in Automotive Buffing: Prior experience in buffing, polishing, or post-paint correction preferred. · Detail-Oriented: Ability to identify and eliminate minor surface defects with precision. · Technically Proficient: Familiarity with rotary and dual-action buffers, pads, compounds, and paint finishes. · Team Player: Willing to coordinate with other technicians to ensure high-quality results. · Reliable & Responsible: Dependable, punctual, and committed to maintaining high standards. · Physical Readiness: Able to stand, bend, and lift up to 50 lbs in a fast-paced environment. Benefits · Paid Vacation · Paid Overtime · PTO according to California regulations · Competitive hourly pay · Paid training and continued development on high-end EV body work. · A company culture that values employee care, social initiatives, and exceptional customer experience

Controller - Experience with SAGE ERP is Required - Orange County CA.Salary: $130,000 - $160,000 per year.Our client is a premier metal finishing company and for decades now, they have been providing anodizing, chemical film, plating, coating and testing services that are widely used in the aerospac

Job Description High-quality fresh chocolate - that's what the Swiss chocolate manufacturer Läderach stands for. Founded in 1962, the family business now employs over 2500 people from more than 80 countries across the group, and the trend is rising. The company's headquarters are located in the canton of Glarus. Here, against a picturesque Alpine backdrop, we produce our fresh chocolates and are constantly developing new, innovative ideas in agile teams. The Retail business unit comprises more than 200 chocolateries in 21 countries. Here we offer our chocolate specialties and invite customers to experience fresh chocolate in ever new ways. Want to be part of it too? Come and join us. Seasonal Store Associate A Part-Time Läderach Seasonal Store Associate is a brand ambassador, passionate about providing a wonderful shopping experience for Läderach customers. The ideal Store Associate is a chocolate-lover with vibrant energy and a welcoming personality who enjoys a dynamic retail environment. What you can expect • You will deliver outstanding customer experience, as well as a similar environment for the in-house team, • You will ensure that production goals are met, including product-finishing projects, • You will execute product sales and register duties, including shop and shelf care, gift packaging and in-shop order fulfillment, • You will assist the store sales goals through helpful recommendations, • You will help to achieve in-store compliance and loss prevention standards, • You will follow merchandising and food safety protocols, • You have at least 1 year of experience in retail sales or similar fast-paced, customer-minded environment, with increasing levels of responsibility, • You are equipped with strong interpersonal skills and able to communicate effectively, • You are reliable and flexible with scheduling based on store needs, • You are quality-minded with keen attention to detail, • You are passionate about chocolate Physical Requirements: • Depending on the length of the shift, employees may need to have physical stamina to remain active and stand for long hours, often walking or standing in a fast-paced environment., • This position requires the ability to move quickly between tasks, assist multiple customers at once, or handle unexpected changes (like restocking or re-organizing displays)., • Multitasking requires physical agility and the ability to stay organized., • Employees may be required to bend, squat, or reach up high to organize or stock products., • Some retail positions require employees to maintain cleanliness in the store, which can involve bending down to clean floors or wiping down displays., • Restocking low shelves or accessing high displays may involve frequent bending or stretching., • Competitive Pay $18 Hourly, • Premium Holiday Pay (Time and a Half), • An exciting working environment with motivated colleagues, • A position with lots of personal responsibility, • The opportunity to contribute fresh ideas, • An open and respectful feedback culture, • In-house and external further training, • Unique career opportunities, • Generous discounts on our products, • Employee Assistance Program, • Chocolate at work Sounds interesting? Then come join us. Jennifer Kassaras, Recruiting and Onboarding Manager linkedin.com/in/jennifer-kassaras-b52b2144 will be happy to answer your questions. You can also visit our career site: My Job Search We are an Equal Opportunity Employer, committed to hiring a diverse workforce. All openings are filled based on qualifications without regard to race, color, sex, sexual orientation, gender identity, national origin, marital status, veteran status, disability, age, religion, or any other classification protected by law. Our success and momentum to expand is only possible through the passionate drive of our diverse 2,500 employees, who come from more than 80 countries and represent various backgrounds, religious beliefs, and lifestyles.

Aerotek - JobID: JP-005636483 [Construction Worker / Laborer] As a Construction Technician at Aerotek, you'll: Perform all aspects of construction demolition work, earthwork and excavations, and the placement and finishing of concrete; Work with remodels and new buildings; Prepare layouts and erect

The Surface Finishing Lead is responsible for overseeing daily operations in the finishing department including wet processing, painting, masking/unmasking, and part marking activities for aerospace metal fittings.This role ensures quality, safety, and production standards are met, while providing h

The Assistant Manager can become a Senior Assistant Manager followed by Theatre Manager or General Manager after finishing the Management Accreditation Program and working for a minimum of six months. Excellent time management, organizational skills, and attention to detail. Noise level may be moder

Job DescriptionESSENTIAL DUTIES & RESPONSIBILITIES: • Plans processes and sequence of the operation to complete plating with the following processes Anodize Type I, II, III. Class I, Class 2, Hard Anodize, • Reads and interprets blueprints, sketches or specification to set the voltage and amperage required., • Dips the metallic parts into acid tanks to clean parts., • Dips the metallic parts into finishing tanks and monitors parts., • Performs visual inspection of plated parts as well as inspection tools to ensure uniform plating on all surface areas are completed., • Racks parts before and after plating., • Logs data into computer for completed parts and processes., • Adheres to safety regulations., • Performs other duties as assigned. QUALIFICATIONS & REQUIREMENTS: • Ability to communicate, read and understand English., • Ability to interpret blueprints and purchase orders., • Ability to follow instructions, specifications and plating procedures., • Knowledge using calipers, micrometers, pin gauges., • Experience of procedures to run acid tanks and equipment set up for plating., • Possess good attention to detail to identify problems with parts., • Comfortable using a computer for data entry. ITAR REQUIREMENT: Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident). PHYSICAL DEMANDS: • Walking/Standing for prolonged periods of time., • Ability to lift up to 30 lbs., • Exposed to heat, noise and chemical fumes while in production areas., • Good hand and eye coordination and movement. We are an Equal Opportunity and Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state or local laws. 7:00AM - 3:30PM

Job Description POSITION SUMMARY: Under the direction of the department Supervisor, the Electroplater is responsible for performing the plating of metallic parts to enhance corrosion protection and/or abrasion resistance. ESSENTIAL DUTIES & RESPONSIBILITIES: • Plans processes and sequence of the operation to complete plating., • Reads and interprets blueprints, sketches or specification to set the voltage and amperage required., • Dips the metallic parts into acid tanks to clean parts., • Dips the metallic parts into finishing tanks and monitors parts., • Performs visual inspection of plated parts as well as inspection tools to ensure uniform plating on all surface areas are completed., • Racks parts before and after plating., • Logs data into computer for completed parts and processes., • Adheres to safety regulations., • Performs other duties as assigned. QUALIFICATIONS & REQUIREMENTS: • Ability to communicate, read and understand English., • Ability to interpret blueprints and purchase orders., • Ability to follow instructions, specifications and plating procedures., • Knowledge using calipers, micrometers, pin gauges., • Experience of procedures to run acid tanks and equipment set up for plating., • Possess good attention to detail to identify problems with parts., • Comfortable using a computer for data entry. ITAR REQUIREMENT: Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident). PHYSICAL DEMANDS: • Walking/Standing for prolonged periods of time., • Ability to lift up to 30 lbs., • Exposed to heat, noise and chemical fumes while in production areas., • Good hand and eye coordination and movement. We are an Equal Opportunity and Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state or local laws. 7:00AM - 3:30PM

Job Description POSITION SUMMARY: Under the direction of the department Supervisor, the Electroplater is responsible for performing the plating of metallic parts to enhance corrosion protection and/or abrasion resistance. ESSENTIAL DUTIES & RESPONSIBILITIES: • Plans processes and sequence of the operation to complete plating., • Reads and interprets blueprints, sketches or specification to set the voltage and amperage required., • Dips the metallic parts into acid tanks to clean parts., • Dips the metallic parts into finishing tanks and monitors parts., • Performs visual inspection of plated parts as well as inspection tools to ensure uniform plating on all surface areas are completed., • Racks parts before and after plating., • Logs data into computer for completed parts and processes., • Adheres to safety regulations., • Performs other duties as assigned. QUALIFICATIONS & REQUIREMENTS: • Ability to communicate, read and understand English., • Ability to interpret blueprints and purchase orders., • Ability to follow instructions, specifications and plating procedures., • Knowledge using calipers, micrometers, pin gauges., • Experience of procedures to run acid tanks and equipment set up for plating., • Possess good attention to detail to identify problems with parts., • Comfortable using a computer for data entry. ITAR REQUIREMENT: Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident). PHYSICAL DEMANDS: • Walking/Standing for prolonged periods of time., • Ability to lift up to 30 lbs., • Exposed to heat, noise and chemical fumes while in production areas., • Good hand and eye coordination and movement. We are an Equal Opportunity and Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state or local laws. 2:30PM - 11:00PM

Job Description Our Culture At Winonics, we foster a collaborative and innovative work environment where employees are valued and empowered. With a strong presence in the manufacturing industry, we are committed to excellence, safety, and continuous improvement. Our team-oriented approach ensures that every employee has the resources and support needed to succeed in their role. We pride ourselves on a structured yet dynamic workplace, where hands-on training and mentorship are key components of our culture. Our leadership team is approachable, encouraging open communication and professional growth. Whether through technical training, skill-building opportunities, or a focus on operational efficiency, we invest in our employees to help them thrive. Position: Lamination Operator Location: Brea, CA - Full-Time, Onsite Position Description We are currently seeking an experienced Lamination Operator with a strong background in operating copper and gold plating lines for the Printed Circuit Board (PCB) industry. The ideal candidate will be skilled in both automated and manual plating processes, have a solid understanding of plating chemistry, and be committed to safety, quality, and attention to detail in every task. Duties & Responsibilities: • Operate automated and manual plating lines for copper and gold processes per traveler instructions., • Monitor and control plating parameters (current, temperature, dwell time, etc.) to ensure quality results., • Perform chemical additions, maintain bath chemistry, and document all changes accurately., • Review and follow production travelers, blueprints, and customer specifications, • Conduct in-process inspections and identify plating defects or irregularities., • Complete and maintain plating logs, chemical records, and maintenance reports., • Perform preventive maintenance on plating tanks, filtration systems, and related equipment., • Maintain a clean and safe work environment by following all chemical handling and PPE procedures., • Support continuous improvement efforts and communicate issues or observations to supervisors or engineers., • Work overtime or weekend shifts as required by production schedules. Job Qualifications: • High school diploma or equivalent required; technical training in plating or chemistry preferred., • Experience with copper or gold plating in a PCB or metal finishing environment a plus., • Ability to read, write, and communicate effectively., • Ability to read and understand blueprints, customer specifications, and process procedures., • Proficient in basic math, problem-solving, and use of computers for logging and tracking process data., • Strong attention to detail and ability to maintain documentation with accuracy., • Must possess effective interpersonal and communication skills to work in a team environment., • Able to lift up to 50 pounds unassisted and stand for the duration of the shift., • Must strictly follow all safety measures, especially in the handling of chemicals and equipment. Hourly Pay: $19 - $24 per hour Compensation is based on relevant experience, education, certifications, and specialized skills. Benefits Winonics provides comprehensive medical, dental, and vision plans, employee life and accidental death, and disability, provides paid time off and paid holidays. Opportunities for professional development and career advancement. Why Join Winonics? At Winonics, we invest in both cutting-edge technology and our employees' professional growth. If you're looking for a role where you can make an impact, collaborate with top industry professionals, and be part of a company committed to excellence, we'd love to hear from you! Apply for this position at Winonics is an ITAR-compliant facility, and all employees must meet ITAR eligibility requirements. We are an Equal Opportunity Employer and comply with all federal, state, and local employment laws.

Job DescriptionSUMMARY Deflash & Deburr is the Finishing method used to remove burrs and sharp edges on parts created by our machines. They are responsible for Maintaining a safe, organized, and clean work area. Perform additional tasks as assigned. ESSENTIAL DUTIES AND RESPONSIBILITIES • Setup and removal of burrs or sharp edges., • Visual inspection of each part using calipers., • Read computerized work instructions., • Remove raised particles and shavings that appear on parts., • Repetitive filing or use of a grinder to smooth away nicks and fragments., • Sanding by hand or sanding with a pneumatic hand tool for more troublesome deformities., • Wash and polish parts prior to submitting for inspection., • Audit and order materials needed for deburring activities, • Ensure deburred parts are within tolerances and coincide to print specifications., • Measure and document when required that parts meet dimension requirements., • Send the first deburr article to quality control inspector., • Make any necessary adjustments per the inspector., • Receive final "buy-off" from inspector and debur remaining parts., • Upon completion of deburring, organize parts and send to next operation., • Maintain work area safe, organized and clean, • All other duties and responsibilities as assigned in support of the company's operations. REASONING ABILITY, • Ability to interpret a variety of instructions (written and oral)., • Critical Thinking skills required. COMMUNICATION SKILLS • Ability to communicate effectively and professionally. EDUCATION and EXPERIENCE • High school diploma or equivalent, • 1-2 plus years previous experience working in Manufacturing (Aerospace preferably)., • Must have basic computer skills, data entry is required to track the production floor., • Strong mechanical aptitude., • Team player., • Mechanically inclined and self-motivated., • Excellent work ethic and safety minded., • Excellent visual acuity and manual dexterity., • Requires working in ambient air temperature. Job Posted by ApplicantPro

Job Description Opening its doors over 45 years ago, FSSI is a leading document outsourcing company servicing Fortune 500 companies in the financial, banking, insurance and billing industries across the U.S. FSSI is currently looking for a Bindery Machine Operator to join our team in Santa Ana, CA. This position is responsible for setting up and operating a variety of bindery and print finishing machinery in a high-volume print and mail processing environment. Full-time Schedule: Monday – Friday, 10:00 am - 6:30 pm Overtime is scheduled as needed, and could require coming in earlier, staying later, and working weekend shifts during high-volume production cycles. ESSENTIAL DUTIES AND RESPONSIBILITIES • Operate and set-up machinery that performs print finishing operations, such as, inserting, folding, cutting, tabbing, stamping, UV coating, booklet making, and inkjet printing., • Learn and follow all established quality control procedures to consistently produce with accuracy., • Flexibility in work schedule, frequently 10 or more hours per day and some weekend shifts, is required on a recurring basis. EDUCATION, EXPERIENCE AND QUALIFICATIONS • Must have related experience in a fast-paced manufacturing, production, or related environment., • Bindery experience is highly preferred., • Knowledge of GEP Finishing Systems is a plus., • High School Diploma or equivalent preferred., • Flexibility in work schedule to work overtime when needed is required. PHYSICAL REQUIREMENTS Continuous standing, walking and movement of the upper body for up to 10 hours a day. Regularly required to use hands and/or fingers to grasp, handle or feel, reach with hands and arms, and talk and hear. Occasionally required to stoop, kneel, crouch, or crawl. Must frequently lift, move, pull, and push up to 40 pounds. Specific visions required by this job include close, distance, accurate color, peripheral vision, and focus adjustments. Benefits FSSI offers its employees competitive pay and benefits with opportunities for growth and advancement. Benefits include (subject to eligibility and plan terms): • 401(k) & Roth, • Participation in Employee Stock Ownership Plan, • Medical, Dental, and Vision Insurance coverage, • Life insurance provided, and voluntary additional life insurance options, • Paid holidays, • Paid sick leave, • Vacation time, • Employee Assistance Program Hiring Pay Range (hourly paid): $17 - $18

Job DescriptionPOSITION SUMMARY: Under the direction of the department Supervisor, the Electroplater is responsible for performing the plating of metallic parts to enhance corrosion protection and/or abrasion resistance. ESSENTIAL DUTIES & RESPONSIBILITIES: • Plans processes and sequence of the operation to complete plating., • Reads and interprets blueprints, sketches or specification to set the voltage and amperage required., • Dips the metallic parts into acid tanks to clean parts., • Dips the metallic parts into finishing tanks and monitors parts., • Performs visual inspection of plated parts as well as inspection tools to ensure uniform plating on all surface areas are completed., • Racks parts before and after plating., • Logs data into computer for completed parts and processes., • Adheres to safety regulations., • Performs other duties as assigned. QUALIFICATIONS & REQUIREMENTS: • Ability to communicate, read and understand English., • Ability to interpret blueprints and purchase orders., • Ability to follow instructions, specifications and plating procedures., • Knowledge using calipers, micrometers, pin gauges., • Experience of procedures to run acid tanks and equipment set up for plating., • Possess good attention to detail to identify problems with parts., • Comfortable using a computer for data entry. ITAR REQUIREMENT: Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident). PHYSICAL DEMANDS: • Walking/Standing for prolonged periods of time., • Ability to lift up to 30 lbs., • Exposed to heat, noise and chemical fumes while in production areas., • Good hand and eye coordination and movement. We are an Equal Opportunity and Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state or local laws. 7:00AM - 3:30PM

Job DescriptionAirstream Orange County is looking for some dynamic RV service technicians who want to work in a growing industry on some of the most iconic trailers in America. Skills in plumbing, carpentry, and aluminum fabrication are definite benefits and skills used throughout the RV industry. RVIA certification is recommended but not required. A successful Recreational Vehicle (RV) Technician will have strong attention to detail, be self-motivated, and be well-versed in all maintenance and repairs. Camping World will pay to certify individuals not already certified. Plumbing-Carpentry-HVAC-Electrical-Mechanical-RV Service. A successful Recreational Vehicle (RV) Technician will have strong attention to detail, be self-motivated, and be well-versed in all maintenance and repairs. The compensation range for this position is $50,000 to $78,000. This position has variable compensation in addition to the range provided Full-time associates are offered a comprehensive benefits package including medical, dental, vision, PTO, 401k, and more! Essential Job Functions: • Provide and document complete diagnostic tests and repair or replacement services to customers, • Perform electrical, plumbing, carpentry, and appliance maintenance, • Track all parts and materials used in repairs or replacements, • Keep supervisor appraised of work progress, • Ensure that the final work product meets quality standards and is inspected by the supervisor or designee, • Maintain a safe and clean work area for customers and coworkers Essential Job Skills:, • Certification from college or technical school in trade field (HVAC, Electrical, Plumbing, Maintenance, etc.) is certainly helpful but, we also consider applicable work experience, • Minimum of 1-year service technician experience or related fields preferred RVIA certification helpful but not required, • RVIA certification helpful but not required •, • May lift up to 25 lbs and/or move up to 50 lbs. with assistive devices, • Prolonged periods of standing, stooping, crawling, and bending, • Exposure to heights and hazards related to working with electrical and welding equipment, • Environmental conditions include heat, cold, humidity, noise, dust, and wetnessQualifications, • Someone who is passionate about fixing mechanical, plumbing, HVAC, electrical, and maintenance problems would be ideal, • A successful Recreational Vehicle (RV) Technician will have strong attention to detail, be self-motivated, and be well-versed in all maintenance and repairs, • Certification from college or technical school in a trade field (HVAC, Electrical, Plumbing, Maintenance, etc.) is certainly helpful but, we also consider applicable work experience, • Valid driver's license, • May lift up to 25 lbs and/or move up to 50 lbsJob-Specific Expectations, • Make 100 % productivity the goal and keep as close to that as possible., • Use factory specifications as the standard in all repair, service, and customization work., • Provide excellent customer service for all external and internal customers, specifically offering dependable vehicle service., • Receive service assignments from the service writer or service manager., • Have the repair work finished within the allotted time. Set goals, develop skills, and constantly increase efficiency skill level., • Submit your requested parts as soon as it is determined what is required for a particular job., • Keep the service writer or service manager informed of any additional work that may be required or of any delays to the estimated completion time as you make those determinations so the customer can receive up-to-date information., • Aid service writer as needed to write work orders, conduct test rides, interact with the customer, or in any other way you are able to guarantee customer satisfaction., • Maintain a clean, efficient work area and assist in keeping the shop neat and organized., • Make sure the proper paperwork is completed and filed after every job completion., • Keep your technical qualifications current by finishing any required training programs., • Take care that the vehicle is cleaner when the job is completed than when the customer dropped it off., • Make each job thorough and complete to reduce return repairs. If the vehicle should be returned for additional work complete it quickly, correctly, and cheerfully.

Job Description Rollem International is a leading distributor of print finishing and embellishment machinery sold nationally and internationally to printing and manufacturing companies. Conveniently located in Anaheim, CA, just one block off the 5 fwy. We are an established 62 year old family based company seeking a front office administrative assistant to perform a variety of responsibilities. Job Description: This individual will • Oversee all general office functions to ensure smooth daily operation of our Anaheim corporate headquarters, • Maintain office calendar, client visits, staff schedules, facilities, order supplies, etc. You will be responsible for handling purchase orders, and resolving customer order/service-related issues. *Daily duties will include handling a low volume of incoming calls, data entry, web portal updating, digital file organization, • Remote support for accounting manager. Process Credit card charges, • Coordinate with branch offices, • Support Sales team – type sales orders, sales quotations and send out literature or product samples as requested., • Handle customer service calls. You will be the first point of contact with current and potential customers so professional communication skills and courtesy are key requirements., • Coordinate International Shipping arrangements. Work with our international freight forwarding company to oversee all details of incoming shipments of machines to the U.S. Track shipments You will also be involved in maintaining records, coordinating shipments, communicating key information, and managing shipping documents., • Assist Marketing Manager with various duties including Social Media and Website marketingCompany DescriptionRollem International is a leading distributor of print finishing and embellishment machinery sold nationally and internationally to printing and manufacturing companies. Conveniently located in Anaheim, CA, just one block off the 5 fwy. We are an established 62 year old family based company seeking a front office administrative assistant to perform a variety of responsibilities.Rollem International is a leading distributor of print finishing and embellishment machinery sold nationally and internationally to printing and manufacturing companies. Conveniently located in Anaheim, CA, just one block off the 5 fwy. We are an established 62 year old family based company seeking a front office administrative assistant to perform a variety of responsibilities.

Job Description It is an exciting time at AAG as we work to achieve our vision of being the global leader in tailored cutting solutions as each machine sale marks the start of a long-term partnership with our clients. AAG is a leading global manufacturer of CNC router machines and knife systems. With over 350,000 standard machine configurations and over 30 decades of Experience, AAG specializes in matching machinery to customers' unique needs and budgets. Designed and built at our state-of-the-art factory in Burlington, Ontario and Tallmadge, Ohio, our Computer Numeric Control (CNC) machines are supplied and supported through a global network of sales and support offices and authorized dealers. We believe every job position is essential in contributing to the success of our company. Once you join our team, you become a critical part of the future of AAG. You'll play a vital role in the continued growth of our company. Overview: We are looking for a self-motivated, tenacious, and ambitious Field Service Technician at our Anaheim location to be part of our Service Team. The Router and Waterjet Service Specialist provides on-location service and support to our existing customers base. By providing timely, quality repair, including the execution of warranty repairs, maintenance, and installation of our products, this position plays a crucial role in ensuring our customers experience reliability and superior customer service. Successful candidates will have a minimum of 5 years of Experience performing repair and maintenance to equipment, preferably in a similar position or industry. Duties and Responsibilities: · Professional service and installation of CNC Router Machines. · Trains customers on CNC Router Machines. · Resolves product and service-related concerns · Provides customer telephone and online support. · Conducts on-site service calls · Provides guidance and support to customers. · Works with engineers on product development and system upgrades. · Other duties as assigned. Qualifications: · Degree or Diploma related to Electrical/Electronic Controls, or related field required. · Experience with CNC machinery. · Experience with CAD-based design software and computer science programs. · Valid license and passport and the ability to travel without restriction required. · Willing to travel up to 50% of work time. · Experience in a technical role, preferably troubleshooting electrical and mechanical systems. · Experience delivering vital customer service · Experience using a multimeter (or another voltage meter). · Strong communication skills, both written and verbal, are required. · Able to work under pressure to meet deadlines. · French and Spanish language skills are considered an asset. · Ability to make independent decisions and handle difficult workplace situations calmly. · Excellent organizational and time management skills with strong attention to detail. · Strong problem-solving skills. · Self-starter. · Positive attitude and eagerness to learn and grow in a dynamic environment. · Experience demonstrating a high level of discretion with confidential information. Company DescriptionAXYZ is a leading global manufacturer of CNC routers and waterjet cutting solutions. With more than 25 years of experience, we’ve built and installed thousands of CNC machines for industries including Aluminum and Metal Cladding, Signmaking, Graphics & Print Finishing, Cabinetry, General Woodworking, Plastic Fabrication, Metal Fabrication, Foam Packaging, Point of Purchase, Solid Surface and most recently, Glass and Steel. Fast – Flexible – Direct – this is our promise to you. With some of the shortest manufacturing lead times in the industry, the flexibility to configure a machine to suit specific manufacturing needs and sales/support offices throughout Canada, the United States, the UK, Poland and India, we’ll answer any questions you have and share industry knowledge with you. We’ve expanded our range of products to include innovative waterjet systems, customizable and able to cut through virtually any material. Our CNC routers can suit any project, and come in a variety of lengths and sizes, configured to your exact application requirements and budget. For parts, accessories and technical service, CNCShop.com is the one-stop shop for all things CNC-related.AXYZ is a leading global manufacturer of CNC routers and waterjet cutting solutions. With more than 25 years of experience, we’ve built and installed thousands of CNC machines for industries including Aluminum and Metal Cladding, Signmaking, Graphics & Print Finishing, Cabinetry, General Woodworking, Plastic Fabrication, Metal Fabrication, Foam Packaging, Point of Purchase, Solid Surface and most recently, Glass and Steel. Fast – Flexible – Direct – this is our promise to you. With some of the shortest manufacturing lead times in the industry, the flexibility to configure a machine to suit specific manufacturing needs and sales/support offices throughout Canada, the United States, the UK, Poland and India, we’ll answer any questions you have and share industry knowledge with you.\r\nWe’ve expanded our range of products to include innovative waterjet systems, customizable and able to cut through virtually any material. Our CNC routers can suit any project, and come in a variety of lengths and sizes, configured to your exact application requirements and budget. For parts, accessories and technical service, CNCShop.com is the one-stop shop for all things CNC-related.

Job Description Position is responsible for maintaining accurate inventories at multiple locations. Will occasionally travel between Anaheim and Downey locations. Must have good knowledge of Excel and computer systems. Employee must develop strong knowledge of inventory processes and engage with manufacturing, shipping, and receiving personnel to ensure inventory is being recorded accurately. Knowledge of Oracle is a strong plus. JOB RESPONSIBILITIES: · Perform Monthly Physical Inventory of Billet/Raw Materials at Downey and Anaheim locations. · Prepare Monthly Physical Inventory of Work in Process at Downey and Anaheim locations. · Prepare Monthly Physical Inventory of Scrap at Downey and Anaheim locations. · Send monthly inventory reports to Controller on a timely basis · Check physical counts against Oracle ERP System counts; research discrepancies as needed and report on findings to management. · Engage with manufacturing, shipping, and receiving personnel throughout the month to ensure that inventory is being recorded properly in Oracle. Provide assistance and training to personnel as needed. Company DescriptionFOR MORE THAN 75 YEARS, Universal Molding Company has provided quality metal roll forming, fabrication, extrusion, and finishing to customers in a wide range of industries. We have earned a reputation for superior workmanship, competitive pricing, and incomparable service. Our "One-stop Shop" ensures that customer orders meet the highest expectations. We utilize equipment designed for the ultimate in accuracy and precision. This mix of dependable machinery, skilled engineering support, turnkey operations and friendly, knowledgeable customer service is how we deliver the best possible product, hassle free and on time. -\tFull modern production facilities -\tOne-stop operation- saves time, money and hassles -\tFriendly, knowledgeable people -\tAdvanced engineering, research, and development -\tRigid quality control -\tWarehousing service availableFOR MORE THAN 75 YEARS, Universal Molding Company has provided quality metal roll forming, fabrication, extrusion, and finishing to customers in a wide range of industries. We have earned a reputation for superior workmanship, competitive pricing, and incomparable service. Our "One-stop Shop" ensures that customer orders meet the highest expectations. We utilize equipment designed for the ultimate in accuracy and precision. This mix of dependable machinery, skilled engineering support, turnkey operations and friendly, knowledgeable customer service is how we deliver the best possible product, hassle free and on time.\r\n•\tFull modern production facilities \r\n•\tOne-stop operation- saves time, money and hassles \r\n•\tFriendly, knowledgeable people \r\n•\tAdvanced engineering, research, and development \r\n•\tRigid quality control \r\n•\tWarehousing service available

Job Description About the Role: We’re looking for an experienced Cabinet Maker and General Woodworker to join our team. The ideal candidate has at least four years of woodworking experience, can read shop drawings, and is comfortable using both hand and power tools to create high‐quality custom pieces. Key Responsibilities: * Cut, shape, and prepare wood components using table saws, sliding saws, panel saws, routers, and other woodworking machinery. * Interpret cut lists and shop drawings accurately and efficiently. * Assemble cabinets, reception desks, corian surfaces, and other millwork items. * Apply laminate and veneer panels to fabricated pieces. * Install hinges, hardware, and ensure proper door alignment. * Maintain a clean, organized, and safe working environment. * Lift, move, and manipulate sheets of material as required. Qualifications: * 4+ years of professional woodworking experience. * Strong ability to read and follow shop drawings and cut lists. * Proficient with power hand tools (routers, belt sanders, jig saws, nail guns, etc.) and power machines (sliding table saw, edgebander, planer, miter saw, etc.). * Experience assembling and finishing cabinets and custom pieces with laminate and veneer. * Self‐motivated, dependable, and able to work well with a team. * Physical ability to lift and maneuver large sheets of material. Preferred Skills: * Experience with reception desk and custom millwork fabrication. * Familiarity with corian or solid‐surface materials.

Job Description J&S Construction is seeking a skilled foreman level trades-person with experience in form setting, rebar installation, and concrete finishing. We are a family-owned business that has been in the industry for 35 years and counting. The qualified candidate must be able to read blueprints, interpret elevations and do their own layout, set batter boards and string lines, set forms, and finish concrete. We are looking for a team player who is willing to do all parts of the project, as even the owner is at times out with the crew with a pick and shovel in hand. For this particular position we are offering, the selected candidate will come to the yard on a daily basis, load the truck with any other tools/materials needed for the day (if not on the work truck already), and drive the work truck out to the jobsite. The selected candidate will help to be responsible for company tools/materials, and will also pickup other items needed for the jobs as necessary (going to White Cap, home depot/lowes, or other local building supply yards). Qualifications: • At least 10 years of experience., • Masonry experience a plus!, • Able to take elevation and do your own layouts., • Set the forms that hold concrete to the desired pitch and depth, and align them., • Concrete Finishing required., • Able to read/interpret blueprints, • Come to the yard in North Orange County and pick up the work truck and tools and materials if needed., • Must be a team player, working well with others., • Must provide a quality product, our business is from returning clientele., • bi-lingual a plus. English and Spanish., • Paid holidays., • Above average pay within industry., • Benefits will be implemented.