General cleaning jobs in Rochester, New YorkCreate job alerts

Enhance the ALDI customer shopping experience in a collaborative team environment as an ALDI Cashier or Stocker. As a member of our team, you’ll be operating the registers or other machinery, stocking our shelves, keeping our stores looking their best, and serving our customers. Start a job that offers up something new each day. Position Type: Part-Time Average Hours: Fewer than 30 hours per week Starting Wage: $20.00 per hour Wage Increases: Year 2 - $20.50 | Year 3 - $21.00 | Year 4 - $21.00 | Year 5 - $22.00 Duties and Responsibilities: Must be able to perform duties with or without reasonable accommodation. • Collaborates with team members and communicates relevant information to direct leader, • Upholds the security and confidentiality of documents and data within area of responsibility, • Other duties as assigned Cashier Responsibilities: • Processes customer purchases, performs general cleaning duties, stocks shelves and merchandise displays neatly, • Provides exceptional customer service, assisting customers with their shopping experience, • Provides feedback to management on all products, inventory losses, scanning errors, and general issues, • Participates in taking store inventory counts according to guidelines and monitoring inventory for accuracy, • Adheres to cash policies and procedures to minimize losses Stocker Responsibilities: • Stocks shelves and rotates product properly to guarantee fresh product is available for the customer, • Follows merchandising planograms to create excellently merchandised displays, • Organizes new inventory, removes and breaks down empty boxes, • Operates machinery and follows all safety procedures Physical Demands: • Regularly required to sit, stand, bend, reach, push, pull, lift, carry, and walk about the store, • Stocker: Ability to stock merchandise from store receiving to shelving; ability to place product, weighing up to 45 pounds, on shelving at various heights Qualifications: • You must be 18 years of age or older, • Ability to provide prompt and courteous customer service, • Ability to perform general cleaning duties to company standards, • Ability to interpret and apply company policies and procedures, • Excellent verbal communication skills, • Ability to work both independently and within a team environment, • Effective time management, • Knowledge of products and services of the company, • Cashier: Ability to operate a cash register efficiently and accurately, • Cashier: Comply with state and local requirements for handling and selling alcoholic beverages, • Stocker: Ability to operate equipment safely and properly, including electric/manual hand jack, floor scrubber, and cardboard baler, • Stocker: ALDI Stockers must have morning availability to accommodate store operational responsibilities and be available to work morning shifts with start times as early as 5:00 a.m. Education and Experience: • High School Diploma or equivalent preferred, • Prior work experience in a retail environment preferred, • A combination of education and experience providing equivalent knowledge ALDI offers competitive wages and benefits, including: • 401(k) Plan, • Company 401(k) Matching Contributions, • Employee Assistance Program (EAP), • Medical, Prescription, Dental & Vision Insurance, • Generous Vacation Time & 7 Paid Holidays, • Up to 6 Weeks Paid Parental Leave at 100% of pay, • Up to 2 Weeks Paid Caregiver Leave at 100% of pay, • Short and Long-Term Disability Insurance, • Life, Dependent Life and AD&D Insurance, • Voluntary Term Life Insurance___ ALDI is committed to equal opportunity for all employees and applicants. As a proud Equal Opportunity Employer (EOE), we do not discriminate based on race, color, national origin, ancestry, citizenship status, religion, sex, sexual stereotyping, sexual orientation, gender, gender identity, gender expression, age, marital status, mental or physical disability, medical condition, genetic information, military or veteran status, pregnancy (which includes pregnancy, childbirth, and medical conditions related to pregnancy, childbirth, or breastfeeding), or any other protected characteristic. Employment may be contingent upon ALDI's receipt of an acceptable and job-related drug test, motor vehicle report, and/or reference check, as applicable and permissible by law.

Schedule: Part time Availability: Afternoon, Evening (Including Weekends). Age Requirement: Must be 18 years or older Location: Pittsford, NY Address: 3220 Monroe Ave Pay: $10.35/ hr. plus tips Job Posting: 09/24/2025 Job Posting End: 10/24/2025 Job ID:R0259807 Note: Candidates must be available for shifts beginning as early as 3:30pm, Tuesday through Saturday. As a server assistant at Next Door by Wegmans, you will play a vital role in delivering exceptional service by supporting the front of house team. You’ll ensure seamless communication between the kitchen and servers, helping deliver orders promptly while maintaining food quality. By assisting servers and expediters, you’ll help create a flawless dining experience, ensuring every guest leaves with a reason to return. What You'll Do • Assist server team as necessary to ensure guest needs are being met and servers can focus their time on interacting with guests, • Deliver dishes to the guests' tables with a sensitivity to time and an understanding of the importance of maintaining the integrity of the food, • Ensure a positive guest experience by maintaining tables and serving guests in an attentive and efficient manner, • Prepare the dining room and bars for service with exceptional attention to detail; ensure all areas are clean, organized and well-stocked, • Maintain a high level of awareness of the work being done by the front and back of house teams to provide proactive assistance, • Execute in-depth cleaning and sanitation of restaurant facility, • Continue to expand food and beverage knowledge by studying menu changes and attending beverage classes, • Learn about special events and general restaurant operations Requirements • Minimum 6 months service experience in a restaurant or other service industry setting, • Enthusiasm for and knowledge of relevant products and services Preferred Qualifications • Customer service experience in the hospitality industry At Wegmans, we’ve always believed we can achieve our goals only if we first fulfill the needs of our people. Putting our people first and offering competitive compensation, comprehensive benefits and a wide range of meaningful perks is just the beginning of what defines a rewarding career at Wegmans. Comprehensive benefits* • Paid time off (PTO) to help you balance your personal and work life, • Higher premium pay rates for working overtime, on Sundays, or on a recognized holiday, • Health care benefits that provide a high level of coverage at a low cost to you, • Retirement plan with a 401(k) match, • A generous scholarship program to help employees meet their educational goals *Certain eligibility requirements must be satisfied, and offerings may differ based upon area or the company and/or position. + At Wegmans, we’ve always believed we can achieve our goals only if we first fulfill the needs of our people. Putting our people first and offering competitive compensation, comprehensive benefits and a wide range of meaningful perks is just the beginning of what defines a rewarding career at Wegmans. • Paid time off (PTO) to help you balance your personal and work life, • Higher premium pay rates for working overtime, on Sundays, or on a recognized holiday, • Health care benefits that provide a high level of coverage at a low cost to you, • Retirement plan with a 401(k) match, • A generous scholarship program to help employees meet their educational goals *Certain eligibility requirements must be satisfied, and offerings may differ based upon area or the company and/or position.

Job Title: Dental Hygienist Department: Dental Location: Dental Group - Penfield Hours Per Week: Per Diem Schedule: Monday - Friday | Days SUMMARY: Provides comprehensive dental prophylaxis care, necessary radiographs, and dental education to patients of the Rochester Regional Health Dental Group. Works efficiently with leadership that may include all or some of the following: Chair of Dentistry, Director of Dentistry, General Practice Residency Director, Staff Dentists and Practice Manager in evaluation and development of our dental services. Provides high quality and efficient dental services. Patients include: children, adults, seniors, special needs, nursing home residents, hospital in-patients, and group home residents from various economic and social backgrounds RESPONSIBILITIES: * Cleans and sterilizes all dental instruments following proper procedures as outlined in the Dental Policy and Procedure Manual. * Works well with the Hospital Sterilization department in maintaining the flow of instruments between departments. * Review and confirm patient’s medical history and note changes in medical record and review with the staff dentist supervising the patient’s care * Maintains operatory equipment to run efficiently and smoothly by cleaning, oiling, and general maintenance of equipment. * Follows the manufacturer’s recommendations in maintaining hand pieces, chairs, suction equipment, and radiographic equipment and documents per department standards. * Demonstrates continued professional competence through continuing educational programs, journals, and educational experiences. * Provides complete dental oral prophylaxis removing calcareous deposits, accretions and stains, including scaling and root planning of exposed root surfaces, polishing teeth including existing restorations. This may include: applying topical agents, topical fluoride applications and topical anesthetic applications, and pit and fissure sealants. * Provides written documentation of all services rendered, treatment necessary, in the patient’s record/chart including the next appointment plan of care. Charting caries and periodontal conditions as an aid to diagnosis by the dentist. * Provides clear written directions in communicating treatment provided (charge-entry); next appointment to be scheduled (number of units and treatment to be scheduled); and treatment pre-determinations to the practice coordinator/billing access associate as directed by the Dentist. * Assist the Department Chief and GPR Director with the continuing review of general practice residents. REQUIRED QUALIFICATIONS: * A.A.S. Degree from an approved Dental Hygiene Program. * Current License or Permit to practice Dental Hygiene in NYS. PREFERRED QUALIFICATIONS * At least one (1) year experience in a dental office or clinic setting preferred * Must have Keyboarding skills and be familiar with the Windows environment * Ability to anticipate needs and multitask with excellent customer service * Exceptional attention to detail and cleanliness EDUCATION: AS: Dental Hygiene (Required) LICENSES / CERTIFICATIONS: DH - Licensed Dental Hygienist - New York State Education Department (NYSED)New York State Education Department (NYSED) PHYSICAL REQUIREMENTS: M - Medium Work - Exerting 20 to 50 pounds of force occasionally, and/or 10 to 25 pounds of force frequently, and/or greater than negligible up to 10 pounds of force constantly to move objects; Requires frequent walking, standing or squatting. For disease specific care programs refer to the program specific requirements of the department for further specifications on experience and educational expectations, including continuing education requirements. Any physical requirements reported by a prospective employee and/or employee’s physician or delegate will be considered for accommodations. PAY RANGE: $33.00 - $43.00 CITY: Penfield POSTAL CODE: 14525 The listed base pay range is a good faith representation of current potential base pay for a successful full time applicant. It may be modified in the future and eligible for additional pay components. Pay is determined by factors including experience, relevant qualifications, specialty, internal equity, location, and contracts. Rochester Regional Health is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, creed, religion, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender identity or expression, national origin, age, disability, predisposing genetic characteristics, marital or familial status, military or veteran status, citizenship or immigration status, or any other characteristic protected by federal, state, or local law.

Job Description Role Description - Warehouse / Equipment Maintenance Coordinator Reports To: General Superintendent The Warehouse/Equipment Maintenance Coordinator is responsible for organizing, maintaining, and managing the logistics of company-owned tools, equipment, and job site materials. The ideal candidate takes pride in keeping things running smoothly, ensuring that all equipment is inventoried correctly, serviced, and readily available when and where it's needed. This hands-on role plays a key part in the success of our project teams. Key Responsibilities: · Inventory Management: o Maintain organized storage of all equipment, tools, parts, and jobsite supplies. o Keep inventory tracking logs accurate and up to date. o Ensure proper handling, storage, and security of materials both in the warehouse and at job sites. o Maintain and update a list of miscellaneous building hardware; distribute to project managers and site superintendents monthly. o Fulfill hardware requests by pulling and delivering parts to job sites, updating inventory logs accordingly. · Equipment Transport: o Pick up and deliver company-owned equipment between storage facilities and job sites as needed. o Ensure safe and secure transportation and set up of equipment and supplies. · Maintenance & Repairs: o Perform routine preventive maintenance (PM) on all company-owned equipment, including but not limited to: § Oil changes § Greasing equipment § Cleaning condenser coils on commercial dehumidifiers § Replacing belts, capacitors, and switches on commercial air movers (fans) o Maintain a detailed maintenance and repair log for each piece of equipment, tracking: § Preventive maintenance schedules and procedures § Dates and descriptions of work performed § Equipment location at time of maintenance (jobsite, warehouse, or repair shop) § Equipment readiness for job site use o Coordinate with outside repair centers for major repairs beyond in-house capabilities. Skills and Qualifications · Strong mechanical aptitude and troubleshooting skills · Intermediate knowledge of: o Gasoline and diesel engine systems o Basic equipment for electrical repairs (e.g., switches, capacitors) o Equipment plumbing (e.g., check valves, condensate pumps) · Ability to lift and move 70+ lbs. as needed · Comfortable working in remote or outdoor job site environments with limited access to utilities · Ability to work independently and follow through on assigned tasks without constant supervision · Strong organizational skills and attention to detail · Additional Requirements: o Valid driver’s license o Personal pickup truck or equivalent vehicle capable of hauling equipment; includes a truck allowance and fuel card o Responsible for supplying own hand tools; Christa will assess and provide any specialty tools as necessary · OSHA 10 certification required at time of hire · Work Environment: o Field-based travel throughout the central, northern, southern tier, and western NY o Fast-paced and dynamic work environment; candidates must be able to work at “Christa speed” – efficiently and proactively Hours between 16 - 24 Occasionally 30 Company DescriptionChrista has completed over $7.0 billion worth of construction throughout New York State. We have experience in the construction of multi-family, senior and student housing, commercial offices, municipality work, medical facilities, warehouses, hotels and restaurants. Whether you see our Christa sign in front of a housing complex, on a college or hospital campus, or in front of a major athletic stadium, our goal is always the same—to build value for our clients, the facility’s end users and the communities these buildings will serve. That’s been the way since 1982.Christa has completed over $7.0 billion worth of construction throughout New York State. We have experience in the construction of multi-family, senior and student housing, commercial offices, municipality work, medical facilities, warehouses, hotels and restaurants.\r\n\r\nWhether you see our Christa sign in front of a housing complex, on a college or hospital campus, or in front of a major athletic stadium, our goal is always the same—to build value for our clients, the facility’s end users and the communities these buildings will serve. That’s been the way since 1982.

Job Description Overview We are seeking a skilled Maintenance Technician to join our team. Maintenance Technician's play a key role in the daily operations of the business by performing routine and preventative maintenance to always maintain the physical integrity of the property. The Maintenance Technician is responsible for maintenance duties including general upkeep and repairs (patching/painting, drywall, light plumbing). Key Responsibilities To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned. • Handle all work assignments in a timely, professional manner., • Refurbish vacancies (Turnovers) including hanging cabinetry painting, cleaning, and general maintenance repairs with some supervision., • Perform general repairs to buildings including, but not limited to interior/exterior painting, repair or adjusting entry doors, replacing light bulbs or fixtures., • Perform general repairs to apartments including but not limited to patching and painting of drywall, repairs or changing of locks, light plumbing of sinks and drains, electrical work such as changing outlets and fixtures with some supervision., • Diagnosis of HVAC service calls, repairing/diagnosis HVAC systems in timely fashion with supervision, • Maintain property appearance including maintaining grounds and dumpster areas daily., • On call rotation is required to answer afterhours service calls, • Ensure that all fire and building codes are adhered to; will notify supervisor immediately of any potential safety or building code violations. The requirements listed below are representative of the qualifications necessary to perform the job: • 1-3 yrs. apartment maintenance or related., • Valid driver's license and clean driving record required., • Prior experience in apartment maintenance is a plus., • General knowledge of electrical, plumbing, and HVAC systems., • Ability to meet established deadlines., • Personable, professional attitude., • Own basic hand tools., • Pay commensurate with experience and skillset level I, II, or III. Benefits • Paid Holidays, • Paid Time Off, • Health, Dental & Vision Insurance, • Life Insurance, • 401(k), • 401(k) Matching, • Rent Discount, • Tuition Assistance, • Professional Development, • Annual Bonus + Raise Glendale Development provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Glendale Development complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Job Description The Clearance Center Team Member is responsible for daily operations of bailers used for salvage textiles and equipment upkeep. They are also responsible for rotating and maintaining the schedules for product table rotations. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Greets customers in a prompt, friendly, and courteous manner; assist customers with prices, location, and information on merchandise, ensuring 100% customer delight., • Maintains interior and exterior of store in a neat, clean, organized manner (including but not limited to vacuuming, dusting, cleaning bathrooms, mopping floor)., • Responsible for the rotation of merchandise on sales floor., • Assist with quality control assurance., • Responsible for back room and floor recovery, cleaning as assigned., • Record sales using the cash register while properly packaging merchandise., • Asks every customer for a Round-up donation, maintains a minimum of 25% round up average., • Ensure accurate payment collection., • Maintain proper cash balance in assigned till per over/under policy., • Address customer concerns in a courteous and respectful manner, while following retail policies. Seek assistance of supervisor, when necessary, to resolve concerns., • Processes salvage and donations efficiently based on company needs and adapts to changes in commodities processing as assigned., • When applicable and as assigned, operates baler and other assigned equipment in a safe manner in accordance with organizational and safety policies and procedures., • As assigned, maintains accurate bale count., • Adhere to Goodwill’s Safety Standards while operating the Baler and while on duty as assigned, • Assist in efficient movement of goods in the warehouse to and from storage or production areas, and in the loading and unloading of trucks with general merchandise and donated goods with the aid of material handling equipment as needed., • Learns to operate assigned material handling equipment in a safe and prudent manner under general supervision, in accordance with the laws of the State of New York, organizational and safety policies and procedures., • Use of safe work procedures and personal protective equipment as required. (i.e. lifting, use of proper equipment, etc.). Reports incidents and injuries in a timely manner to the immediate supervisor., • Ensures that all items are processed accurately and that all saleable merchandise always makes it to the sales floor., • Performs any other duties as assigned. QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. At least 18 years of age. • Ability to work in non-climate controlled environments required, • Ability to exert maximum muscle force to lift, push, pull, or carry objects as required by job., • Ability to stand for extended periods of time, and to lift up to 40 pounds regularly, up to 60+ pounds occasionally. Might be required to lift up heavier goods with assistance., • Ability to work under general supervision. EDUCATION and/or EXPERIENCE: High school diploma or GED preferred. LANGUAGE SKILLS: Able to read and comprehend simple instructions, short correspondence and memos. Able to write simple correspondence. Communicate effectively with other employees of the organization. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to dust, molds and dirt particles. The employee regularly works in outside weather conditions. The noise level in the work environment is usually moderate to loud. Availability: Must have open and flexible availability, and be willing to work evenings and weekends. PHYSICAL DEMANDS While performing the duties of this job, the employee is regularly required to operate the baler, run the pallet truck and hydraulic lift; and stoop, kneel, crouch or bend in order to load and empty containers. Goodwill of the Finger Lakes and its subsidiaries encourage diversity in the workplace; we are an Equal Opportunity Employer. Minority/Female/Sexual Orientation/Gender Identity or Expression/Veteran/Disability

Job Description fairlife, LLC is a Chicago-based nutrition company that creates great-tasting, nutrition-rich and dairy products to nourish consumers. With over $3B in annual retail sales, fairlife's portfolio of delicious, lactose-free, real dairy products includes: fairlife® ultra-filtered milk; Core Power® High Protein Shakes, a sports nutrition drink to support post-workout recovery; fairlife® nutrition plan™, a nutrition shake to support the journey to better health. A wholly owned subsidiary of The Coca-Cola company, fairlife, LLC has been recognized by both Fast Company and Nielsen for its industry leading innovation. To learn more about fairlife and its complete line of products, please visit fairlife.com. The construction of fairlife's manufacturing facility in Webster, NY is underway. This state-of-the-art, 750k sq ft, greenfield plant is expected to be operational in late 2025 and will lay the foundation for fairlife's next phase of growth as the leading dairy nutrition provider. While coupling the industry's latest technologies and fairlife's operational excellence to build this world-class facility, fairlife plans to hire 250 new employees and bring in approximately 5 million lbs. of milk a day, with room to grow over the coming years. shift schedule: 12 Hour Nights: This is a night shift position, with hours from 6:00 PM to 6:00 AM. The role follows a rotating 2-2-3 schedule: two days on, two days off, three days on, followed by two days off, two days on, and three days off. Team members will work every other weekend, including Friday, Saturday, and Sunday. Shift Differential of $2 per hour for night shift. .job purpose: The Packaging Operator operates, sets up, changes over, troubleshoots, and cleans either sleeving, case packing, or palletizing equipment. This position ensures the manufactured products meet specifications, makes minor adjustments as necessary, clears any jams that may occur, and prepares the equipment for cleaning. They continuously feed various materials into the machines such as sleeves, corrugate, shrink film, glue, pallets, and stretch wrap. They adhere to food processing requirements verified by routine quality checks and maintain food safe practices for the entire duration of operation. responsibilities: • Follow all safety, working, and Good Manufacturing Practices (GMP) rules., • Report to and follow the directions of the Production Supervisors., • Demonstrate the ability to safely operate moving equipment and make the appropriate adjustments within process limits in order to package accurate and defect-free cases with sleeved bottles., • Observe machine operations to ensure quality conformity to specifications and standard operating procedures for all packaged products., • Inspect packaged product throughout the process including filled bottles, sleeved bottles, formed cases, shrink wrapped cases, and full pallets to verify all meet finished specifications then adjust the process as needed while escalating issues to a supervisor., • Supply packaging equipment with materials such as sleeves, corrugate, shrink film, glue, pallets, and stretch wrap., • Periodically count and record all finished or rejected materials., • Clean the packaging equipment, ancillary tools, conveyors, and surrounding areas. Maintain the entire packaging line in audit ready condition both during and after production., • Proactively monitor the production line, packaging equipment, and surrounding conveyors to watch for any problems including backups, jams, or rejects. Efficiently resolve stoppages and continue production in a timely manner while recording all downtime reasons., • Stop and address machines when faults occur, clear machine jams, then report malfunctions to the appropriate supervisor and/or technician., • Troubleshoot problems, perform minor repairs using the correct tools, and participate in Preventive Maintenance on the packaging equipment., • Demonstrate proactive monitoring skills, using visual observation of gauges and listening to mechanical sounds to ensure equipment is functioning properly. Inform maintenance of suspected issues if unable to correct., • Aid in the training of new personnel or upskilling of team members. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be provided to enable individuals to perform the essential functions. • A High School diploma or General Education Degree (GED) required., • Strong verbal and written communication skills., • Basic computational skills including simple math and reasoning required., • Must be able to operate the equipment effectively after the appropriate training period., • Must have the ability to troubleshoot small problems and escalate accordingly for those requiring additional expertise., • Must work in a safe, efficient manner while adhering to all safety procedures., • Must possess or be able to obtain an Industrial Truck Operator License., • Ability to handle ambiguity and work in a fast paced, entrepreneurial environment. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Sitting/Standing/Walking/Lifting/Carrying – The Packaging Operator stands throughout their shift and walks on uneven concrete or tile surfaces. They lift full packaged cases to conduct routine checks and load material onto the equipment infeed areas., • Pushing/Pulling/Bending/Stooping – The Packaging Operator pushes/pulls rolls of labels onto sleever and stacks collapsed boxes on a pallet or places into a recycling container. The Packaging Operator pushes/pulls while using brooms, dust mops, and brushes during cleanup duties. The Packaging Operator bends/stoops occasionally throughout the workday for varying lengths of time, especially to maintain the corrugate material feed level for the packer., • Squatting/Kneeling/Crawling/Twisting/Turning – The Packaging Operator may squat to pick up product from the floor, or during various cleanup duties. There will be occasional twisting and turning at the waist is used when loading material, or when performing routine responsibilities., • Climbing/Balancing/Reaching – The Packaging Operator steps on and off the platforms and climbs stairs to access equipment. The Packaging Operator reaches below and/or above shoulder level when removing or adding boxes to a pallet, loading materials, and dumping unfinished product components., • Notify supervision of any repairs or adjustments that are required that may affect product quality or food safety., • Understand, observe, and comply with the handling and usage of the color-coded container policy while in the Production Areas., • Perform all duties necessary to meet Company, Customer, and/or Government requirements and standards as prioritized by the Company., • Ability to initiate action to prevent the occurrence of nonconformities relating to food safety and the quality of the product, processes, quality system, or safety system., • Identify and record any problems relating to food safety and the quality of ingredients, processes, quality system, or safety system., • Control further processing or delivery of nonconforming products in terms of food safety and quality issues until the deficiency or unsatisfactory condition has been corrected. reports to: Packaging Supervisor travel requirements: little to none exempt/nonexempt: nonexempt This position is eligible for bonus. *Base pay offered may vary depending on geography, job-related knowledge, skills, and experience. A full range of medical, financial, and/or other benefits, dependent on the position, is offered. Base pay range:$25—$25 USD fairlife, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. All qualified applicants and employees will be given equal opportunity. Selection decisions are based on job-related factors. In addition to its nondiscrimination commitment, the Company will also provide reasonable accommodation of qualified individuals with known disabilities unless doing so would impose an undue hardship on the Company. If you have a disability and would like to request accommodation in order to apply for a position with us, please email . For Recruitment Agencies At fairlife, we manage the majority of our hiring internally through our dedicated Talent Acquisition team, which is actively engaged in direct candidate sourcing. Most of our roles are filled through applications submitted via our careers site or through direct outreach by our team. As our recruitment is primarily handled in-house, we work only occasionally with external agencies, and only those on our existing, pre-approved vendor list. At this time, we are not reviewing or expanding that list. Unsolicited resumes or submissions from external agencies not authorized by our Talent Acquisition team will be considered direct candidate applications. As such, fairlife will not assume responsibility for any placement fees associated with these submissions.

Job Description fairlife, LLC is a Chicago-based nutrition company that creates great-tasting, nutrition-rich and dairy products to nourish consumers. With over $3B in annual retail sales, fairlife's portfolio of delicious, lactose-free, real dairy products includes: fairlife® ultra-filtered milk; Core Power® High Protein Shakes, a sports nutrition drink to support post-workout recovery; fairlife® nutrition plan™, a nutrition shake to support the journey to better health. A wholly owned subsidiary of The Coca-Cola company, fairlife, LLC has been recognized by both Fast Company and Nielsen for its industry leading innovation. To learn more about fairlife and its complete line of products, please visit fairlife.com. The construction of fairlife's manufacturing facility in Webster, NY is underway. This state-of-the-art, 750k sq ft, greenfield plant is expected to be operational in late 2025 and will lay the foundation for fairlife's next phase of growth as the leading dairy nutrition provider. While coupling the industry's latest technologies and fairlife's operational excellence to build this world-class facility, fairlife plans to hire 250 new employees and bring in approximately 5 million lbs. of milk a day, with room to grow over the coming years. shift schedule: 12 Hour Days: This is a day shift position, with hours from 6:00 AM to 6:00 PM. The role follows a rotating 2-2-3 schedule: two days on, two days off, three days on, followed by two days off, two days on, and three days off. Team members will work every other weekend, including Friday, Saturday, and Sunday. job purpose: The Packaging Material Operator is responsible for the organization, storage, and supply of raw materials to filling and packaging equipment via an Industrial Truck for transportation. This position provides preforms that are fed to the blow molder, caps that are directed to the capper, and chemicals for cleaning in or around the filler. They maintain the cleanliness of their drive paths while assisting with operational activities to ensure minimal contributions to downtime. Duties also consist of chemical and material waste removal, including rejected packaging products. responsibilities: • Follow all safety, working, and Good Manufacturing Practices (GMP) rules., • Report to and follow the directions of the Production Supervisors., • Demonstrate the ability to safely operate a variety of forklifts for moving and staging material or material waste., • Be able to clean and sort all used material as part of normal operating procedures in a neat and orderly fashion., • Maintain proper First In First Out (FIFO) rotation of raw materials, inventory, or assigned items., • See that all materials for finished and non-finished goods are properly stored, all the necessary paperwork is comprehensively filled out, and computer documentation has been completed in a timely manner., • Communicate with supervisor and filler operator consistently about inventory availability or any risks associated with upcoming production orders., • Adhere to placement of inventory in designated, labeled locations. Verify all supplies and inventory remain 18" from the walls. Consult management to determine necessary action if proper space is not available., • Ensure packaging infeed areas stay clean, orderly, and clear of debris at all times during or between production. Store materials in an audit ready manner at all times., • Conduct monthly and yearly housekeeping audits, while executing follow up actions to remain in specifications., • Learn how to operate downstream packaging equipment, processing equipment, or palletizing equipment as needed., • Aid in the training of new personnel or upskilling of team members. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be provided to enable individuals to perform the essential functions. • A High School diploma or General Education Degree (GED) required., • Strong verbal and written communication skills., • Must be able to coordinate packaging material needs effectively after the appropriate training period., • Must have the ability to troubleshoot small problems and escalate accordingly for those requiring additional expertise., • Must work in a safe, efficient manner while adhering to all safety procedures., • Must possess or be able to obtain an Industrial Truck Operator License., • Ability to handle ambiguity and work in a fast paced, entrepreneurial environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Sitting/Standing/Walking/Lifting/Carrying – The Material Handler stands on and operates an industrial truck throughout the majority of their shift, sitting approximately one quarter of the time. The Material Handler walks on uneven concrete and tile surfaces in the packaging or material storage area. They may lift up to 60 pounds on a frequent basis and 80 pounds on an occasional basis. Two or more employees work together for lifts of greater than 80 pounds., • Pushing/Pulling/Bending/Stooping – The Material Handler pushes/pulls filled bags when re-stacking a pallet. They push/pull while using brooms, dust mops, and brushes during cleanup duties. The Material Handler bends/stoops occasionally throughout the workday for varying lengths of time., • Squatting/Kneeling/Crawling/Twisting/Turning – The Material Handler may squat to pick up product from the floor, or during various cleanup duties. There will be occasional twisting and turning at the waist when loading material, or when performing routine responsibilities., • Climbing/Balancing/Reaching – The Material Handler steps on and off the industrial truck and climbs stairs to access material pallets or infeed chutes. The Material Handler reaches below and/or above shoulder level when removing or adding bags to a pallet, loading materials, and dumping unfinished product components., • Notify supervision of any repairs or adjustments that are required that may affect product quality or food safety., • Understand, observe, and comply with the handling and usage of the color-coded container policy while in the Production Areas., • Perform all duties necessary to meet Company, Customer, and/or Government requirements and standards as prioritized by the Company., • Ability to initiate action to prevent the occurrence of nonconformities relating to food safety and the quality of the product, processes, quality system, or safety system., • Identify and record any problems relating to food safety and the quality of ingredients, processes, quality system, or safety system., • Control further processing or delivery of nonconforming products in terms of food safety and quality issues until the deficiency or unsatisfactory condition has been corrected. reports to: Packaging Supervisor travel requirements: little to none exempt/nonexempt: nonexempt This position is bonus eligible. *Base pay offered may vary depending on geography, job-related knowledge, skills, and experience. A full range of medical, financial, and/or other benefits, dependent on the position, is offered. Base pay range:$23—$23 USD fairlife, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. All qualified applicants and employees will be given equal opportunity. Selection decisions are based on job-related factors. In addition to its nondiscrimination commitment, the Company will also provide reasonable accommodation of qualified individuals with known disabilities unless doing so would impose an undue hardship on the Company. If you have a disability and would like to request accommodation in order to apply for a position with us, please email . For Recruitment Agencies At fairlife, we manage the majority of our hiring internally through our dedicated Talent Acquisition team, which is actively engaged in direct candidate sourcing. Most of our roles are filled through applications submitted via our careers site or through direct outreach by our team. As our recruitment is primarily handled in-house, we work only occasionally with external agencies, and only those on our existing, pre-approved vendor list. At this time, we are not reviewing or expanding that list. Unsolicited resumes or submissions from external agencies not authorized by our Talent Acquisition team will be considered direct candidate applications. As such, fairlife will not assume responsibility for any placement fees associated with these submissions.

Job Description fairlife, LLC is a Chicago-based nutrition company that creates great-tasting, nutrition-rich and dairy products to nourish consumers. With over $3B in annual retail sales, fairlife's portfolio of delicious, lactose-free, real dairy products includes: fairlife® ultra-filtered milk; Core Power® High Protein Shakes, a sports nutrition drink to support post-workout recovery; fairlife® nutrition plan™, a nutrition shake to support the journey to better health. A wholly owned subsidiary of The Coca-Cola company, fairlife, LLC has been recognized by both Fast Company and Nielsen for its industry leading innovation. To learn more about fairlife and its complete line of products, please visit fairlife.com. The construction of fairlife's manufacturing facility in Webster, NY is underway. This state-of-the-art, 750k sq ft, greenfield plant is expected to be operational in late 2025 and will lay the foundation for fairlife's next phase of growth as the leading dairy nutrition provider. While coupling the industry's latest technologies and fairlife's operational excellence to build this world-class facility, fairlife plans to hire 250 new employees and bring in approximately 5 million lbs. of milk a day, with room to grow over the coming years. shift schedule: 12 Hour Nights: This is a night shift position, with hours from 6:00 PM to 6:00 AM. The role follows a rotating 2-2-3 schedule: two days on, two days off, three days on, followed by two days off, two days on, and three days off. Team members will work every other weekend, including Friday, Saturday, and Sunday. Shift Differential of $2 per hour for night shift. job purpose: The Packaging Material Operator is responsible for the organization, storage, and supply of raw materials to filling and packaging equipment via an Industrial Truck for transportation. This position provides preforms that are fed to the blow molder, caps that are directed to the capper, and chemicals for cleaning in or around the filler. They maintain the cleanliness of their drive paths while assisting with operational activities to ensure minimal contributions to downtime. Duties also consist of chemical and material waste removal, including rejected packaging products. responsibilities: • Follow all safety, working, and Good Manufacturing Practices (GMP) rules., • Report to and follow the directions of the Production Supervisors., • Demonstrate the ability to safely operate a variety of forklifts for moving and staging material or material waste., • Be able to clean and sort all used material as part of normal operating procedures in a neat and orderly fashion., • Maintain proper First In First Out (FIFO) rotation of raw materials, inventory, or assigned items., • See that all materials for finished and non-finished goods are properly stored, all the necessary paperwork is comprehensively filled out, and computer documentation has been completed in a timely manner., • Communicate with supervisor and filler operator consistently about inventory availability or any risks associated with upcoming production orders., • Adhere to placement of inventory in designated, labeled locations. Verify all supplies and inventory remain 18" from the walls. Consult management to determine necessary action if proper space is not available., • Ensure packaging infeed areas stay clean, orderly, and clear of debris at all times during or between production. Store materials in an audit ready manner at all times., • Conduct monthly and yearly housekeeping audits, while executing follow up actions to remain in specifications., • Learn how to operate downstream packaging equipment, processing equipment, or palletizing equipment as needed., • Aid in the training of new personnel or upskilling of team members. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be provided to enable individuals to perform the essential functions. • A High School diploma or General Education Degree (GED) required., • Strong verbal and written communication skills., • Must be able to coordinate packaging material needs effectively after the appropriate training period., • Must have the ability to troubleshoot small problems and escalate accordingly for those requiring additional expertise., • Must work in a safe, efficient manner while adhering to all safety procedures., • Must possess or be able to obtain an Industrial Truck Operator License., • Ability to handle ambiguity and work in a fast paced, entrepreneurial environment. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Sitting/Standing/Walking/Lifting/Carrying – The Material Handler stands on and operates an industrial truck throughout the majority of their shift, sitting approximately one quarter of the time. The Material Handler walks on uneven concrete and tile surfaces in the packaging or material storage area. They may lift up to 60 pounds on a frequent basis and 80 pounds on an occasional basis. Two or more employees work together for lifts of greater than 80 pounds., • Pushing/Pulling/Bending/Stooping – The Material Handler pushes/pulls filled bags when re-stacking a pallet. They push/pull while using brooms, dust mops, and brushes during cleanup duties. The Material Handler bends/stoops occasionally throughout the workday for varying lengths of time., • Squatting/Kneeling/Crawling/Twisting/Turning – The Material Handler may squat to pick up product from the floor, or during various cleanup duties. There will be occasional twisting and turning at the waist when loading material, or when performing routine responsibilities., • Climbing/Balancing/Reaching – The Material Handler steps on and off the industrial truck and climbs stairs to access material pallets or infeed chutes. The Material Handler reaches below and/or above shoulder level when removing or adding bags to a pallet, loading materials, and dumping unfinished product components., • Notify supervision of any repairs or adjustments that are required that may affect product quality or food safety., • Understand, observe, and comply with the handling and usage of the color-coded container policy while in the Production Areas., • Perform all duties necessary to meet Company, Customer, and/or Government requirements and standards as prioritized by the Company., • Ability to initiate action to prevent the occurrence of nonconformities relating to food safety and the quality of the product, processes, quality system, or safety system., • Identify and record any problems relating to food safety and the quality of ingredients, processes, quality system, or safety system., • Control further processing or delivery of nonconforming products in terms of food safety and quality issues until the deficiency or unsatisfactory condition has been corrected. reports to: Packaging Supervisor travel requirements: little to none exempt/nonexempt: nonexempt This position is bonus eligible. *Base pay offered may vary depending on geography, job-related knowledge, skills, and experience. A full range of medical, financial, and/or other benefits, dependent on the position, is offered. Base pay range:$23—$23 USD fairlife, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. All qualified applicants and employees will be given equal opportunity. Selection decisions are based on job-related factors. In addition to its nondiscrimination commitment, the Company will also provide reasonable accommodation of qualified individuals with known disabilities unless doing so would impose an undue hardship on the Company. If you have a disability and would like to request accommodation in order to apply for a position with us, please email . For Recruitment Agencies At fairlife, we manage the majority of our hiring internally through our dedicated Talent Acquisition team, which is actively engaged in direct candidate sourcing. Most of our roles are filled through applications submitted via our careers site or through direct outreach by our team. As our recruitment is primarily handled in-house, we work only occasionally with external agencies, and only those on our existing, pre-approved vendor list. At this time, we are not reviewing or expanding that list. Unsolicited resumes or submissions from external agencies not authorized by our Talent Acquisition team will be considered direct candidate applications. As such, fairlife will not assume responsibility for any placement fees associated with these submissions.

Job Description fairlife, LLC is a Chicago-based nutrition company that creates great-tasting, nutrition-rich and dairy products to nourish consumers. With over $3B in annual retail sales, fairlife's portfolio of delicious, lactose-free, real dairy products includes: fairlife® ultra-filtered milk; Core Power® High Protein Shakes, a sports nutrition drink to support post-workout recovery; fairlife® nutrition plan™, a nutrition shake to support the journey to better health. A wholly owned subsidiary of The Coca-Cola company, fairlife, LLC has been recognized by both Fast Company and Nielsen for its industry leading innovation. To learn more about fairlife and its complete line of products, please visit fairlife.com. The construction of fairlife's manufacturing facility in Webster, NY is underway. This state-of-the-art, 750k sq ft, greenfield plant is expected to be operational in late 2025 and will lay the foundation for fairlife's next phase of growth as the leading dairy nutrition provider. While coupling the industry's latest technologies and fairlife's operational excellence to build this world-class facility, fairlife plans to hire 250 new employees and bring in approximately 5 million lbs. of milk a day, with room to grow over the coming years. shift schedule: 12 Hour Days: This is a day shift position, with hours from 6:00 AM to 6:00 PM. The role follows a rotating 2-2-3 schedule: two days on, two days off, three days on, followed by two days off, two days on, and three days off. Team members will work every other weekend, including Friday, Saturday, and Sunday. job purpose: The Packaging Operator operates, sets up, changes over, troubleshoots, and cleans either sleeving, case packing, or palletizing equipment. This position ensures the manufactured products meet specifications, makes minor adjustments as necessary, clears any jams that may occur, and prepares the equipment for cleaning. They continuously feed various materials into the machines such as sleeves, corrugate, shrink film, glue, pallets, and stretch wrap. They adhere to food processing requirements verified by routine quality checks and maintain food safe practices for the entire duration of operation. responsibilities: • Follow all safety, working, and Good Manufacturing Practices (GMP) rules., • Report to and follow the directions of the Production Supervisors., • Demonstrate the ability to safely operate moving equipment and make the appropriate adjustments within process limits in order to package accurate and defect-free cases with sleeved bottles., • Observe machine operations to ensure quality conformity to specifications and standard operating procedures for all packaged products., • Inspect packaged product throughout the process including filled bottles, sleeved bottles, formed cases, shrink wrapped cases, and full pallets to verify all meet finished specifications then adjust the process as needed while escalating issues to a supervisor., • Supply packaging equipment with materials such as sleeves, corrugate, shrink film, glue, pallets, and stretch wrap., • Periodically count and record all finished or rejected materials., • Clean the packaging equipment, ancillary tools, conveyors, and surrounding areas. Maintain the entire packaging line in audit ready condition both during and after production., • Proactively monitor the production line, packaging equipment, and surrounding conveyors to watch for any problems including backups, jams, or rejects. Efficiently resolve stoppages and continue production in a timely manner while recording all downtime reasons., • Stop and address machines when faults occur, clear machine jams, then report malfunctions to the appropriate supervisor and/or technician., • Troubleshoot problems, perform minor repairs using the correct tools, and participate in Preventive Maintenance on the packaging equipment., • Demonstrate proactive monitoring skills, using visual observation of gauges and listening to mechanical sounds to ensure equipment is functioning properly. Inform maintenance of suspected issues if unable to correct., • Aid in the training of new personnel or upskilling of team members. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be provided to enable individuals to perform the essential functions. • A High School diploma or General Education Degree (GED) required., • Strong verbal and written communication skills., • Basic computational skills including simple math and reasoning required., • Must be able to operate the equipment effectively after the appropriate training period., • Must have the ability to troubleshoot small problems and escalate accordingly for those requiring additional expertise., • Must work in a safe, efficient manner while adhering to all safety procedures., • Must possess or be able to obtain an Industrial Truck Operator License., • Ability to handle ambiguity and work in a fast paced, entrepreneurial environment. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Sitting/Standing/Walking/Lifting/Carrying – The Packaging Operator stands throughout their shift and walks on uneven concrete or tile surfaces. They lift full packaged cases to conduct routine checks and load material onto the equipment infeed areas., • Pushing/Pulling/Bending/Stooping – The Packaging Operator pushes/pulls rolls of labels onto sleever and stacks collapsed boxes on a pallet or places into a recycling container. The Packaging Operator pushes/pulls while using brooms, dust mops, and brushes during cleanup duties. The Packaging Operator bends/stoops occasionally throughout the workday for varying lengths of time, especially to maintain the corrugate material feed level for the packer., • Squatting/Kneeling/Crawling/Twisting/Turning – The Packaging Operator may squat to pick up product from the floor, or during various cleanup duties. There will be occasional twisting and turning at the waist is used when loading material, or when performing routine responsibilities., • Climbing/Balancing/Reaching – The Packaging Operator steps on and off the platforms and climbs stairs to access equipment. The Packaging Operator reaches below and/or above shoulder level when removing or adding boxes to a pallet, loading materials, and dumping unfinished product components., • Notify supervision of any repairs or adjustments that are required that may affect product quality or food safety., • Understand, observe, and comply with the handling and usage of the color-coded container policy while in the Production Areas., • Perform all duties necessary to meet Company, Customer, and/or Government requirements and standards as prioritized by the Company., • Ability to initiate action to prevent the occurrence of nonconformities relating to food safety and the quality of the product, processes, quality system, or safety system., • Identify and record any problems relating to food safety and the quality of ingredients, processes, quality system, or safety system., • Control further processing or delivery of nonconforming products in terms of food safety and quality issues until the deficiency or unsatisfactory condition has been corrected. reports to: Packaging Supervisor travel requirements: little to none exempt/nonexempt: nonexempt *Base pay offered may vary depending on geography, job-related knowledge, skills, and experience. A full range of medical, financial, and/or other benefits, dependent on the position, is offered. Base pay range:$25—$25 USD fairlife, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. All qualified applicants and employees will be given equal opportunity. Selection decisions are based on job-related factors. In addition to its nondiscrimination commitment, the Company will also provide reasonable accommodation of qualified individuals with known disabilities unless doing so would impose an undue hardship on the Company. If you have a disability and would like to request accommodation in order to apply for a position with us, please email . For Recruitment Agencies At fairlife, we manage the majority of our hiring internally through our dedicated Talent Acquisition team, which is actively engaged in direct candidate sourcing. Most of our roles are filled through applications submitted via our careers site or through direct outreach by our team. As our recruitment is primarily handled in-house, we work only occasionally with external agencies, and only those on our existing, pre-approved vendor list. At this time, we are not reviewing or expanding that list. Unsolicited resumes or submissions from external agencies not authorized by our Talent Acquisition team will be considered direct candidate applications. As such, fairlife will not assume responsibility for any placement fees associated with these submissions.

Job Description Position Summary: The Facilities Coordinator & Maintenance Technician will play a key role in managing both the operational coordination and hands-on maintenance activities across the organization’s facilities. This position will oversee the scheduling and execution of preventive and corrective maintenance tasks while also managing the day-to-day facilities operations. The individual in this role will be responsible for the upkeep and repair of building systems, equipment, and facilities, as well as coordinating the daily tasks of facilities support staff and ensuring that all facilities are maintained to the highest standards. The position will also require the individual to handle various errands and ensure effective communication with tenants, providing prompt responses to their requests and concerns. Key Responsibilities/Essential Job Functions: Maintenance & Repair: • Perform routine maintenance, troubleshooting, and repairs for building systems such as HVAC, electrical, plumbing, and lighting., • Conduct regular inspections to identify any maintenance issues or areas that require repairs, and initiate action to resolve them., • Perform minor construction, painting, and general repairs as needed to maintain the aesthetic and functional quality of the facilities., • Respond to urgent maintenance requests (e.g., equipment breakdowns, plumbing issues) and ensure timely resolution., • Develop, implement, and maintain a preventative maintenance program for all facilities, ensuring systems are regularly inspected and serviced to avoid costly repairs or breakdowns., • Schedule and perform regular inspections and preventative maintenance tasks on building systems (e.g., HVAC filters, plumbing checks, fire alarm systems, lighting)., • Coordinate and schedule daily maintenance activities, ensuring that staff members are assigned appropriate tasks and resources., • Work closely with the Facilities Manager to develop maintenance schedules and priorities, balancing urgent repairs with routine maintenance tasks., • Maintain communication with team members, vendors, and leadership regarding ongoing work, requests, and facility updates., • Manage relationships with external vendors and contractors for specialized maintenance tasks (e.g., HVAC, plumbing, electrical work), ensuring that service contracts are fulfilled and service quality is maintained., • Obtain quotes and assist with procurement for necessary materials and supplies for maintenance tasks, ensuring cost efficiency., • Assist in coordinating general facility operations, including space planning, cleaning schedules, and landscaping coordination., • Ensure that facilities are properly stocked with necessary maintenance supplies, cleaning products, and tools., • Aid in setting up for events or special projects as needed, ensuring the facility is prepared and operational., • Maintain accurate logs of all maintenance and repair activities, including details of completed work, service requests, and inventory use., • Provide regular reports to the Facilities Manager on the status of ongoing maintenance tasks, facility issues, and project timelines., • Ensure that all maintenance and repair work complies with safety regulations, building codes, and company policies., • Follow established safety protocols when performing maintenance work, including the use of protective equipment and proper disposal of hazardous materials., • Run errands such as trips to the bank and post office, ensuring that financial and mailing tasks are completed efficiently., • Perform airport trips for facility-related needs, such as picking up or dropping off company representatives, vendors, or contractors., • Serve as a primary point of contact for tenants at 987 East Avenue and Victor, addressing their questions, concerns, and complaints promptly., • Ensure that maintenance issues raised by tenants are responded to in a timely manner, with clear communication regarding expected resolution times., • Maintain a professional and customer-service-oriented approach when dealing with tenants to ensure high satisfaction levels., • Regularly update tenants on the status of ongoing maintenance requests or issues affecting their space. Education & Experience: • High school diploma or equivalent required; a technical certification (e.g., HVAC, plumbing, electrical) or Associate’s degree in Facilities Management, Maintenance, or a related field preferred., • Minimum of 3-5 years of experience in facilities maintenance or a similar role., • Experience in performing general building repairs and maintenance (HVAC, electrical, plumbing, painting, etc.)., • Strong technical knowledge of building systems, including HVAC, plumbing, electrical, and lighting systems., • Ability to troubleshoot and perform repairs on a variety of systems and equipment., • Excellent time management and organizational skills, with the ability to prioritize multiple tasks., • Ability to coordinate and schedule maintenance activities effectively, ensuring minimal disruption to facility operations., • Strong communication and interpersonal skills to work with internal teams, vendors, contractors, and tenants., • Familiarity with safety regulations and building codes, including OSHA requirements., • Detail-oriented with a proactive, problem-solving mindset., • Strong work ethic and ability to take ownership of tasks., • Ability to work independently with minimal supervision., • Willingness to be on call for emergency repairs or urgent maintenance requests., • Ability to perform physical tasks, including lifting up to 50 lbs, standing for long periods, and climbing ladders., • This position will primarily be based at 987 East Avenue, Victor, NY, and 973 East Avenue, Rochester, NY, with occasional travel to other sites for maintenance or repair needs., • The role involves both office work (scheduling, reporting) and hands-on tasks (repairs, inspections, physical labor)., • Competitive salary with performance-based incentives, • Comprehensive benefits package, including health, dental, and vision insurance, • Supplementary benefit plans for hospital indemnity, critical illness, and accident insurance, • Safe Harbor 401k program, • Opportunities for professional development and career growth within a leading multi-disciplinary practice, • A collaborative and supportive work environment dedicated to excellence in patient care and service The Facilities Coordinator & Maintenance Technician is a dynamic role that combines technical expertise in facilities maintenance with exceptional communication skills, ensuring that all tenants’ needs are met promptly and effectively. By handling both the operational aspects of facilities management and additional duties such as errands and tenant communication, this position is crucial in maintaining the smooth and efficient operation of all facilities managed by Rhino Administrative Service, LLC. All duties and responsibilities stated are essential job functions. Staff members may be required to perform additional job-related duties as assigned by management. It is the policy of Rhino Administrative Services, LLC, to provide equal employment opportunities without regard to race, color, religion, sex, national origin, age, disability, marital status, veteran status, sexual orientation, genetic information or any other protected characteristic under applicable law.

Job Description Title CMM Mechanical Programmer / Inspector Department Quality Assurance Reports to Quality Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join to RPO team! Job Summary: The position is responsible for operating and programming the Zeiss CMM. The individual will work with other inspectors to perform Receiving, In-process and Final Inspection of mechanical and other components and assemblies. The individual will be expected to train and assist others in the programming and operation of the CMM, and will perform the calibration of RPO equipment. You will: • Program and Operate a CMM to evaluate mechanical and other parts, • Use the CMM and other standard tools to evaluate mechanical and other parts for acceptance, • Perform Receiving, In-Process and Final Inspection of mechanical and other parts, • Perform First Article and PPAP and other Inspections, • Assist in the specification and design of CMM fixtures, • Perform calibration on various RPO measuring equipment You have: • CMM programming experience (Calypso Preferred), • CMM operating experience, • Ability to use hand measuring tools such as micrometers, calipers, drop gages, thread gages, etc., • Mechanical part inspection experience (Open Plate Layout), • Hand Tool calibration experience, • Ability to work with a great deal of independence, • Good team player, • Ability to train co-workers, • Ability to read, analyze and interpret part drawings, specifications and standards. Ability to communicate effectively to team members and management., • Ability to apply mathematical concepts such as algebra, geometry and trigonometry., • High School diploma. AAS or AS preferred You Are: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” Work environment & Physical Demands: • While performing the duties of this job, the employee is regularly required to stand: use hands to fingers, handle or feel: and reach with hands and arms. The employee frequently is required to stand, walk, stoop, kneel, crouch: and talk and hear., • The job may involve prolong periods of sitting/standing., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain), • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp., • The employee is frequently required to use the computer., • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally works in a clean environment and works to maintain the environment as such., • Safety Glasses are required, • May require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually loud., • The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles., • May work at different workstations as production needs require, or shifts from one station to another, during the production process. You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Culture: an energetic, caring, fun, value-driven team. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire.

Job Description Title Coating Technician I - B Shift Department Coating Reports to Coating Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join to RPO team! Job Summary: The Coating Technician plays a vital role in the production of high-quality precision optics by applying thin-film coatings to a multitude of different lenses and components. Using specialized vacuum deposition equipment, the technician ensures coatings meet strict performance and durability standards essential for optical clarity and functionality. This position requires careful attention to detail, consistency in process execution and a strong commitment to quality in our manufacturing environment. In addition to coating product, this position will support coating operations to include but may not be limited to; equipment maintenance and preventive maintenance, testing, failure analysis, process development, tooling design, and scheduling. You Will: • Prepare precision optical components for coating by cleaning, masking and inspecting for defects., • Operate and maintain vacuum deposition systems (e.g. e-beam, sputtering, thermal evaporation), • Monitor coating processes and parameters to ensure optimal film performance and uniformity., • Inspect coated optics using spectrophotometers, interferometers and microscopes., • Record process data, quality control metrics and maintenance logs with a strong attention to detail., • Troubleshoot and resolve issues with equipment or coating quality., • Collaborate with engineers and management staff to refine coating processes., • Maintain a clean, organized and safe work environment in accordance with ISO and cleanroom standards., • Measure optical spectra, prepare samples for environmental testing, and provide required data to QA personnel., • Keep accurate and complete coating records, • Daily coater cleanup and perform/ assist during routine large-scale cleanup., • Maintain equipment, tooling, adaptors and work area in accordance with Good Manufacturing Practices, ISO and HSE protocols., • Train Coating associates on job-specific tasks as well as mentoring in the area of coating, testing and spectral measurements., • Work closely with the Coating Manager to understand current capabilities and work toward strategic capability improvements., • Work closely with other functional areas at RPO to improve the flow and quality of components to Coating. You Have: • High School Diploma/GED Required; Associate degree or technical certification in optics, materials science or a related field a plus!, • 1-3 years of experience in optical coating or thin-film technology in a precision manufacturing environment., • Ability to read, analyze and interpret complex documents. Ability to communicate effectively to team members and management., • Strong mechanical aptitude and familiarity with vacuum or precision manufacturing equipment. You Are: • Results-Oriented: Motivated, hard-working and ready to level-up., • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge., • Process Oriented: Well organized, demonstrating attention to detail., • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude., • Accountable: Demanding the highest quality from yourself and team members., • Detail-Oriented: Have excellent time management and organizational skills., • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude., • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” Environment & Physical Demands: • While performing the duties of this job, the employee is regularly required to stand: use hands to fingers, handle or feel: and reach with hands and arms. The employee frequently is required to stand, walk, stoop, kneel, crouch: and talk and hear., • The job may involve prolong periods of sitting/standing., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain)., • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp., • The employee is frequently required to use the computer., • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally works in a clean environment and works to maintain the environment as such., • Safety Glasses are required, and may require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually loud. You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Culture: an energetic, caring, fun, value-driven team. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. B Shift: Monday - Friday, 2pm - 10:30pm. 5% Shift differential offered to B shift employees. Training will take place on A shift before transitioning to a B shift Schedule: Monday - Friday 6am - 2:30pm Compensation details: 20-26 Hourly Wage PI59bc98e6e823-25405-38685777

Job Description Schedule: Monday-Friday 9am-5pm, with some on call expectations. This is a building maintenance and repair position (not a maintenance cleaning role). Documented experience and a valid driving license with an acceptable driving history is required. This is a building maintenance and repair position (not a maintenance cleaning role). Under direction of Director, the technician is responsible for maintaining buildings and property in quality condition. Performs repairs and conducts preventive and regular maintenance of buildings, furniture, fixtures and equipment. Unless otherwise noted as non-driving, all facility workers are expected to know how to operate ODM fleet vehicles. The driver must have a clean driving record to be approved per insurance standards, which includes a check for DUI/DWI, history of a suspended license, and/or vehicular manslaughter. Fleet includes a box truck, a refrigerated van, 8- passenger and 12- passenger vans, and a pickup truck. DUTIES & RESPONSIBILITIES: • Performs all work orders as assigned by Director or Coordinator, • Ensure that premises and equipment are well maintained, clean and safe; inspecting work of technicians and providing feedback to director, • May be available after hours to respond to emergency situations pertaining to heating failure, water leaks, and inclement weather concerns and share on-call responsibilities with the director, • Administer approved procedures as it pertains to assignment of tasks, use of equipment, safety, preventative maintenance and repairs, • Ensure the efficient and prompt handling of all department work, • Perform from start to completion any and all of facilities related work orders, • Daily tasks may include but are not limited to: general carpentry, remodeling, electrical, plumbing, painting, safety, locks, repair of any and all types of appliances & equipment typical to all residential & commercial facilities., • Committed Christian with a commitment to and a passion for "restoring hope and changing lives", • Serve as a positive role model for students and guests, • Safety conscious with a good knowledge of facility operation and general maintenance, • Must be a self-starter, able to work well alone or with others, including volunteers and students, • Skilled with power tools, • Ability to work evenings and/or weekends, • Meet and deal tactfully and courteously with donors, employees, volunteers, students, guests and vendors, • Appropriately handles frequent changes, delays and unexpected events, • Remain calm in a crisis or emergency situation, • Able to read and write; and communicate via email, • Must hold a current and valid New York State Driver's License and be willing to authorize a driver's record and background check, • Physically fit, knowledge of safe handling and lifting techniques

Job DescriptionJob Overview: We are seeking a highly motivated and skilled Maintenance Mechanic who performs mechanical repairs on all production and non-production equipment. Key Responsibilities: • Follows all safety process and procedures in accordance with the job and Company policy., • Interprets machine operation manuals and identifies problem source., • Disassembles and removes, repairs and/or replaces defective components on manufacturing equipment., • Specifies and quotes replacement items for manufacturing equipment and facilities., • Performs preventative maintenance, including lubricating and cleaning of manufacturing equipment., • Performs simple repairs on building and grounds (windows, fences, doors, etc.) and plumbing., • Construct simple facility improvement projects (door frames, shelving, partitions, etc.)., • Visually inspects and tests machinery and equipment., • Listens for unusual sounds from machines or equipment to detect malfunction and discusses machine operation variations with supervisors or other maintenance workers to diagnose problem or repair machine., • Cleans and lubricates shafts, bearings, gears, and other parts of machinery., • Installs and repairs electrical apparatus, such as transformers and wiring, and electrical and electronic components of machinery and equipment., • Lays out, assembles, installs, and maintains pipe systems and related hydraulic and pneumatic. equipment, and repairs and replaces gauges, valves, pressure regulators, and related equipment., • Repairs and maintains the physical structure of the establishment., • Must possess own tools., • Installs, programs, or repairs automated machinery and equipment such as robots or programmable controllers and a firm grasp of Ladder Logic is required., • Be able to respond to call-backs in emergency break down situations on an as needed basis., • Intermediate Skills: Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry., • The noise level in the work environment is usually loud., • This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change at any time with or without notice.Hours:, • Full Time - 40 hours per week, • Monday - FridayBenefits:, • Competitive salary and benefits package., • Opportunity to work in a dynamic and innovative environment., • Professional growth and development opportunities., • Collaborative and supportive work culture.Contact Us:

Job DescriptionDescription: Position Purpose: Under the direction of the Site Director assumes full responsibility for the coordination and participation in the preparation, cooking and distribution of hot and cold foods to children and adults of Generations. The employee is responsible for following the menu, estimating food consumption and maintaining inventory. In addition, the employee has responsibility for cleaning the kitchen area, kitchen utensils, equipment and inspection of work area. Assumes full responsibility for the completion of general cleaning duties of Generations locations. Does related work as required. Essential Job Responsibilities: • Ensures that food is properly prepared on time in accordance with menus and recipes and distributes and delivers food tray to correct classrooms, • Ensures adherence to safety and sanitary procedures in accordance with OSHA, Monroe County Health Department, CACFP and accredited regulations, • Plans menus and makes adjustments & changes to menus only when necessary and reports these changes to the Site Director, • Estimates food consumption and maintains inventory of kitchen and serving supplies, • Ensures proper portioning of food by using the CACFP requirement guidelines, • Vacuums, mops and cleans glass in public areas of the building(s), • Ensure all trash is collected and container is sanitized, • Daily cleaning of all bathrooms- including disinfecting, mopping and replenishing toiletries, • Responsible for any other miscellaneous cleaning in the building(s), • Added duties would be at the discretion of the Site Director, • Ensure daily accurate recording of CACFP menu book to meet CACFP guidelines, • Ensures proper cleaning of kitchen utensils, equipment, including the cleaning and defrosting of refrigerators and freezers and inspection of work area for cleanliness and functional operation., • Receive and inspect all incoming food deliveries, sign all invoices and forward to Site Director Experience: 1 year of cooking/food prep experience. A combination of related training and experience may be substituted. Physical/Mental Abilities: Must be able to perform the job requirements for up to 170 children and adults in the building. Must be able to physically lift at least 50 lbs. Skills: • Flexible to varied assignments and willingness to take direction from others., • Ability to pay attention to details and follow instructions., • Positive attitude with the ability to integrate into a team to work towards the mission and goals of Generations., • Knowledge of how the kitchen works – equipment, tools and utensils, is preferred., • Ability to work effectively under pressure

Job Description Job Description Title Maintenance Mechanic Technician Department Facilities Reports to Facilities Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join to RPO team! Job Summary: The Maintenance Mechanic Technician plays a critical role in ensuring the smooth operation of all production and support equipment within the facility. This position is responsible for performing both mechanical and electrical maintenance tasks, diagnosing equipment issues, and executing timely repairs to minimize downtime. The technician also sources replacement components or devises effective solutions to restore damaged parts, contributing to the overall efficiency and reliability of plant operations. You will: • Troubleshoot and repair mechanical and electrical problems that occur on production and facility equipment, • Work with others as well as independently, • Read blueprints and set up procedures, • Operate several electrical test devices including digital multi-meters, amp meters, oscilloscope, etc., • Machine Programming, • Troubleshooting relay logic, control system devices, analog input/output devices, and similar equipment, • Perform calibration of precision devices related to measurement of process variables. (i.e. temperature, pressure, flow, etc..)., • Perform preventative maintenance on equipment including inspection, lubrication, and evaluation, • Maintain, troubleshoot and repair hydraulic, mechanical, pneumatic, and vacuum systems., • Must be able to read, understand, and create electrical and mechanical blueprints, assembly drawings, equipment manuals, control schematics, ladder logic and other technical manuals, • Must have a complete understanding of analog and digital control signals and power distribution systems – including but not limited to 0-10VDC, 4-20MA, 24 VDC, 120VAC control circuits, and 480VAC motor circuits, • Experience in programming and troubleshooting HMI and PLC controlled systems, • Process control experience, • Knowledge and understanding of Lock Out/Tag Out procedures, • Ability to work with 3 phase 240/480 and single phase 220/110 voltage systems, • Knowledge and understanding of induction heating equipment, • Ability to repair and maintain equipment with or without documentation, • Ability to document your own work and be able to generate repair manuals and preventative maintenance procedures for equipment, • Be able to respond immediately to equipment related problems and maintain, troubleshoot, and repair equipment to ensure minimal down time., • Maintains an organized, clean, safe work area., • Able to work independently in performing various equipment maintenance tasks. You Have: * Associate of Applied Science (AAS) in Electrical/Mechanical Technology or related field preferred. * Minimum of 5 years of hands-on experience in industrial maintenance required. * Strong ability to read, analyze, and interpret complex technical documents, schematics, and equipment manuals. * Effective verbal and written communication skills to collaborate with team members and management. * Proficient in applying basic mathematical concepts to troubleshoot and resolve equipment issues. * Demonstrated ability to diagnose mechanical and electrical problems and implement timely repairs. * Familiarity with sourcing and replacing parts or fabricating repair solutions for damaged components. * Commitment to safety protocols and preventive maintenance practices in a fast-paced manufacturing setting. You are: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Culture: an energetic, caring, fun, value-driven team Environment & Physical Demands: • While performing the duties of this job, the employee is regularly required to stand: use hands to fingers, handle or feel: and reach with hands and arms. The employee frequently is required to stand, walk, stoop, kneel, crouch: and talk and hear., • The job may involve prolong periods of sitting/standing., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain)., • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp., • The employee is frequently required to use the computer., • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally works in a clean environment and works to maintain the environment as such., • Safety Glasses are required and May require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually loud. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. Monday - Friday, 6am - 2:30pm

Job DescriptionDescription: General Description: Part-time Laborer will be responsible for performing routine duties associated with the day-to-day activities of the operations/maintenance department. Duties include but not limited to manual labor, event set-up and tear-down activities, compliance with equipment handling guidelines, equipment storage, operating mechanical equipment, equipment inspections, general housekeeping and custodial duties, and policing public areas. Position reports to Labor Foreman or MOD. Primary Responsibilities: • Works as scheduled; wears complete uniform including name badge., • To act in a professional manner at all times., • Maintain radio contact throughout entire shift., • Maintains service hall; keeps clean/clear of debris from North Promenade to RG&E., • Responsible for separating trash from recycling, as well as dumping trash in either dumpster or compactor., • Assist with keeping loading dock both upper and lower clean., • Lift moderate to heavy amounts of weight in the form of tables, chairs, stanchions, staging and step units, dance floor panels, and exhibition materials., • Push equipment carts, door panels, and staging/step units as required., • Cleaning dance floors, carpet, glass, stainless steel, painted surfaces, mirrors, concrete, woodwork, and terrazzo., • Mopping, stripping, waxing, and sealing vinyl tile and concrete floors., • Vacuuming and shampooing/extracting carpets., • Policing and cleaning restroom areas and public areas., • Dusting and vacuuming office furniture and draperies., • Walking, standing, sitting, stooping, pushing, pulling, and lifting objects as required., • Implementation of basic cleaning methods as required in the maintenance of exterior grounds and interior areas., • Completion of tasks assigned in compliance with basic safety guidelines., • Sweeping, mopping, and removing dirt, water, and ice as required., • Performing grounds maintenance during inclement weather as required., • Completion of tasks and daily assignments as assigned in a cooperative manner. 20. Perform general manual labor associated with set-up, custodial, maintenance, or housekeeping functions., 21. Maintain public image of the Operations/Maintenance Department and the Center at all times., 22. Maintain an irregular work schedule as required by the Labor Foreman for the servicing of scheduled events and routine assignments., 23. Such other duties, functions, special projects, and responsibilities as assigned by the Shift Leader of Labor Foreman. Additional Responsibilities: • The Part-time Maintenance Worker shall interact with other employees within established guidelines., • The Part-time Maintenance Worker shall follow instructions as required and be knowledgeable of policies regarding safety as to working procedures and conditions upon the premises of the Convention Center., • As a highly visible employee, the Part-time Maintenance Worker shall maintain the public image of the Convention Center as required., • Minimum high school education or equivalent required., • Up to one (1) year experience in a set-up or related position., • Up to one (1) year experience in a custodial/housekeeping position., • Ability to demonstrate basic set-up techniques with a working knowledge of set-up principles, procedures, and equipment use., • Ability to demonstrate basic cleaning techniques., • Ability to perform manual tasks requiring physical strength and perform reasonably heavy labor., • Ability to operate heavy mechanized equipment., • Ability to follow written and/or verbal instructions accurately and work independently., • Related training and experience gained which offers a further understanding of set-up, custodial house - and ground–keeping techniques is desirable.

Job Description The Country Club of Rochester is a prestigious Platinum Club of America and one of the country's oldest clubs with deep roots in the community. This is a great chance to be part of a devoted team who takes pride in providing excellent service. We are seeking qualified and dedicated individuals to fill the Steward Position! Duties/Responsibilities: • Ensure the kitchen is clean, well maintained and organized at all times, following all sanitation guidelines.., • Ensure floors are dry and clean at all times., • Operate dish machine., • Assist the Cooks and Servers as and when necessary., • Proactively collects and removes trash from all areas of the operation., • Ensure waste bin and loading dock area is kept clean and tidy., • Carry out general cleaning as directed to include sweeping, mopping up, etc., • Cleans and sanitizes pots, pans, utensils, and other equipment., • Cleans and sanitizes dishes and related ServiceWare following established procedures., • Cleans large equipment as assigned, following established procedures., • Consistently adheres to SDS (Safety Data Sheet) information related to the proper and safe use of chemicals in the workplace., • Ensure all equipment is clean and in good working order., • Wash, Wipe, Sort, stack dishes, and load/unload dishwasher., • Wash, Wipe, Sort, stack and store all cleaned items in an organized and safe manner., • Clean, sanitize and close workstations., • Uses and maintains all equipment according to manufacturer and department guidelines., • Report any maintenance or hazard issues to management., • Assist in light food preparation as directed by manager, such as washing and peeling vegetables., • Always Maintain a clean and safe work environment. Able to work at a rapid pace while maintaining attention to detail; ability to multi-task Be able to stand/walk for 8 hours; bend, push, pull; lift 30 lbs Advantages of being a CCR team member include: • Medical, Dental and Vision Benefits for Full Time employees!, • Free Long-Term Disability and Life Insurance for Full Time employees!, • 401k with up to 5% Employer Match available to both Full Time and Part Time Employees!, • Free Lunch and/or Dinner during your shift!, • Free Golf on Mondays!, • Many Employee Discounts through LifeMart!

Job DescriptionDescription: Supervisory Responsibilities: None Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. · Follows all safety process and procedures in accordance with the job and Company policy. · Interprets machine operation manuals and identifies problem source. · Disassembles and removes, repairs and/or replaces defective components on manufacturing equipment. · Specifies and quotes replacement items for manufacturing equipment and facilities. · Performs preventative maintenance, including lubricating and cleaning of manufacturing equipment. · Performs simple repairs on building and grounds (windows, fences, doors, etc.) and plumbing. · Construct simple facility improvement projects (door frames, shelving, partitions, etc.). · Visually inspects and tests machinery and equipment. · Listens for unusual sounds from machines or equipment to detect malfunction and discusses machine operation variations with supervisors or other maintenance workers to diagnose problem. or repair machine. · Cleans and lubricates shafts, bearings, gears, and other parts of machinery. · Installs and repairs electrical apparatus, such as transformers and wiring, and electrical and electronic components of machinery and equipment. · Lays out, assembles, installs, and maintains pipe systems and related hydraulic and pneumatic. equipment, and repairs and replaces gauges, valves, pressure regulators, and related equipment. · Repairs and maintains the physical structure of the establishment. · Must possess own tools. · Installs, programs, or repairs automated machinery and equipment such as robots or programmable controllers and a firm grasp of Ladder Logic is required. · Be able to respond to call-backs in emergency break down situations on an as needed basis. · Other duties as assigned. Requirements: Education High school diploma or general education degree (GED), or equivalent combination of education and experience. Experience 3-5 years related experience or training. Other Requirements Ability to read blueprints, interpret operation manuals; understanding of manufacturing equipment and facilities; ability to use hand and power tools and mechanical testing equipment; welding, machining and plumbing experience helpful. Computer Skills: Keyboarding Language Skills: Intermediate Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Mathematical Skills: Intermediate Skills: Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. Reasoning Ability: Intermediate Skills: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the employee is regularly required to stand; walk; sit; maneuver through the office and factory; use hands to finger, handle, or feel; reach with hands and arms; grasp and twist, climb or balance; stoop, kneel, crouch, or crawl; talk or hear; lift and/or move equipment/product weighing up to 50 pounds. Work with another associate to lift anything greater than 50lbs. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. While performing the duties of this job the employee is regularly exposed to humid conditions; moving mechanical parts; high, precarious places, extreme heat; extreme cold; risk of electrical shock; toxic or caustic chemicals and outside weather conditions. The noise level in the work environment is usually loud.

Job DescriptionDescription: JOSEPH A. FLOREANOROCHESTER RIVERSIDE CONVENTION CENTERJOB DESCRIPTIONDepartment: Food & BeveragePosition: Line Cook General Description: Individual will use appropriate standardized recipes and sanitation/safety procedures of the Center to prepare quality as designated by Executive and Sous Chef. This position reports to the Executive and Sous Chef and/or appropriate Manager on Duty. LOOKING FOR SOMEONE WILLING TO WORK INBETWEEN 20-60 HOURS PER WEEK. THE BETTER AVAIABLITY YOU HAVE, THE MORE HOURS YOU WILL RECEIVE! Primary Responsibilities: 1. Works as scheduled and in proper uniform/nametag., 2. Responsible for proper preparation, cooking, and plate-up of food in a timely and organized manner as outlined on prep list in accordance with designated food safety and sanitation procedures., 3. Responsible for verification of information provided on production sheet in your workstation and to clarify with supervisor ANY information that you are not familiar with., 4. Responsible for preparing food as listed on a production sheet, in proper amounts, in proper containers, with proper food, and at times designated within your area. This includes verifying the amount of food produced matches the amounts listed on the production sheets., 5. Responsible for preparation and storage of such foods in accordance with the established food sanitation and safety procedures., 6. Responsible for quality control; including personally inspecting every item of food leaving their area and any questions of quality will be brought to the attention of the supervisor., 7. Responsible for the gathering of supplies and movement of these supplies necessary to prepare food items on production sheets; and to return the items which are extra and will not be used., 8. Responsible to follow proper procedures for use of knives and all mechanical kitchen equipment., 9. Responsible for cleaning of all food preparation and related equipment., 10. Responsible for inventory of items as directed by Chefs. This may require exposure to extreme cold temperatures below 32 degrees for periods of one hour or more., 11. Responsible for organizing cooler, proper storage, and reduction of waste., 12. All other duties as designated by Management. Additional Responsibilities: 1. Obtain work schedule on a weekly basis., 2. Must punch in and out at your scheduled time including meal periods and be prepared in a properly cleaned and pressed uniform on time per schedule., 3. No excessive jewelry will be tolerated., 4. Individual is responsible for calling their supervisor at least two hours prior to their scheduled shift if they are sick. In addition, they must be prepared to produce a doctor's notification for illness., 5. Position requires individual stand throughout entire shift; and to reach, bend, stoop, wipe, lift, carry, climb, balance, kneel, crouch, walk, push, pull, and grasp. In addition, requires ability to exert up to 100 pounds of force occasionally and/or up to 30 pounds of force frequently. This includes carrying items up flights of stairs, and service corridor ramps. *This job description in no way states or implies that these are the only duties and responsibilities to be performed by the employee occupying this position. Individual will be required to follow any other instructions and to perform any other duties required by their supervisor. Requirements: Qualifications: 1. Minimum high school education or equivalent preferred. Individual should possess reading, writing, and math skills., 2. Individual with at least one (1) year experience in a restaurant/kitchen environment including ability to read and follow standardized recipes, and good working knowledge of hot food preparation. Individual must be able to demonstrate use of knives, all mechanical kitchen equipment, and a basic knowledge of food sanitation standards., 3. Position requires individual to work irregular work hours including day, evening, holidays, and weekends., 4. Individual should possess communication skills, especially when interacting with co-workers, and teamwork skills.

Job DescriptionDescription: JOSEPH A. FLOREANO ROCHESTER RIVERSIDE CONVENTION CENTERJOB DESCRIPTION Department: Food & Beverage Position: Utility General Description: Individual will use appropriate sanitation and safety procedures clean tableware, pots, pans, utensils, and maintain cleanliness throughout the dishroom and kitchen, as well as assist with setup and breakdown of food functions and coffee breaks. This position reports to Lead Utility, Executive Kitchen Steward, Executive Chef, and/or Food and Beverage managers. Primary Responsibilities: 1. Responsible for knowing weekly work schedule; must be in full uniform., 2. Responsible for proper use of dish machine to clean all dishes used within the Kitchen and for events., 3. Responsible for washing dirty pots and pans in potsink and potwasher., 4. Responsible for organized storage of dishes, glasses, silverware, pots, pans, utensils, etc. in appropriate areas., 5. Responsible for keeping dish machine and potwasher filled with clean water, and monitoring chemical usage during the course of the day. Including maintaining appropriate temperatures, i.e. final rinse at 180 degrees., 6. Responsible for keeping soiled dish area organized and clean between functions and at the end of the day., 7. Responsible for keeping room behind dish machine clean and organized., 8. Responsible to wipe down and sanitize all metal surfaces in dishroom/potroom between functions and at the end of the day., 9. Responsible for sweeping and mopping floors between functions and at the end of the day; also when asked by management., 10. Responsible for removing trash to the dumpster when trash cans are filled, and at the end of the day. This includes following designated recycling procedures. Must reline trashcans with clean bags., 11. Responsible for maintaining a clean and organized mop closet., 12. Responsible for assisting with kitchen plate-up, food service set-up and breakdown when needed., 13. Responsible for following proper breakdown procedures for dishroom and pot room on a daily basis. This includes proper breakdown of the dish machine and care of equipment., 14. Responsible for maintaining the sanitation of utility areas and equipment., 15. Responsible to prepare all hot/cold beverages as indicated by production lists. Also responsible for delivery of beverages to food service area, and cleaning of urns and cambro’s., 16. Responsible for maintaining sanitation, including but not limited to: hand towel dispenser, soap dispensers, cleanliness of all hand wash sinks, and proper levels of soap and rinse agent in dish machine and pot washer., 17. Set-up and removal of the food service equipment and tables for the services and breakdown area for banquet servers., 18. Responsible for reporting all breakage to management., 19. Additional duties as directed by Management. Other Responsibilities: 1. Obtain work schedule on a weekly basis., 2. Maintain proper uniform when working in public space., 3. Position requires individual to work late nights and then back again early morning., 4. To punch in for shift and be prepared in a properly cleaned and pressed uniform on time per schedule., 5. Must punch in and out at your scheduled time including breaks and lunchtime., 6. No excessive jewelry., 7. Individual is responsible for calling their supervisor at least two hours prior to their scheduled shift if they are sick. In addition they must be prepared to produce a Doctor's notification for illness., 8. Position requires individual stand throughout entire shift; and to reach, bend, stoop, wipe, lift, carry, climb, balance, kneel, crouch, walk, push, pull, and grasp. In addition requires ability to exert up to 100 pounds of force occasionally and/or up to 20 pounds of force frequently. This includes carrying items up flights of stairs, and service corridor ramps. • This job description in no way states or implies that these are the only duties and responsibilities to be performed by the employee occupying this position. Individual will be required to follow any other instructions and to perform any other duties required by their supervisor. Requirements: Qualifications: • Minimum high school education or equivalent preferred. Should be able to read and write and possess basic math skills., • Individual with at least (6) six months experience in dishwashing preferred., • Position requires individual to work irregular work hours including day, evening, holidays, and weekends., • Individual should possess communication skills, especially when interacting with co-workers, and teamwork skills.

Job Description Title Quality Engineer Department Quality Reports to Quality Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join the RPO team! Job Summary: The Quality Engineer will be responsible for providing high level technical support for RPO’s QC Inspection area. Performs and trains others in QC test and inspection processes and makes decisions on product and process acceptability. Recommends appropriate test and measurement equipment and arranges for equipment calibration. May work in a cleanroom environment and low-light areas. Provides Quality Assurance technical support for all aspects of the RPO ISO 9001 quality management system, including evaluation of requests for quotation, setting up the QA support for new jobs, supporting existing jobs, records management, and document writing. Participates in internal quality audits, interacts with suppliers, customers, external auditors, and co-workers to provide support as needed. You will: · Explain and interpret ISO 9001 QMS requirements as they pertain to RPO and its products, processes and services · Explain and interpret optical and mechanical drawings, specifications, standards, purchase orders and contracts extracting the essential information for QA support and risk analysis · Cleaning, inspection and evaluation of product to specifications and requirements · Lead and participate in internal audits · Functions as auditor escort during external audits · Provide QA Engineering support for production, prototype and engineering activities including risk analysis, quoting, quality and test plans, inspection and testing, data gathering and analysis, sample submissions, performance reporting, project close-out, etc. · Selection and calibration of inspection and test equipment, working with equipment and calibration suppliers · Assess gage system status and adequacy · Make final decisions on product acceptability · Review, disposition and process RMAs. · Lead and participate in DOEs, FMEAs, DFMs, DVT, DFM, Lesson’s Learned and other activities · Train others in the use of inspection and measuring equipment, testing, SPC and other subjects · Write inspection instructions and quality / test plans including test and measuring equipment usage procedures and procedures requiring customer approval · Perform / coordinate environmental, durability, reliability and other testing as needed · Assemble and submit FAI and other sample packages · Review and approve Supplier FAI and other sample Packages · Work with Supply Chain to improve and control RPO supply base · Issue, manage, validate and close CAPAs · Create, manage and participate in ECOs · Implement and manage RPO document control system · Interact professionally with Manufacturing, Sales, Purchasing, Engineering, customers, suppliers, and all other individuals as required · Identifies and recommends improvement opportunities · Other duties as assigned You have: · Familiarity with QC inspection equipment and techniques · Computer skills, including Microsoft Office. Minitab preferred · Ability to interpret optical and mechanical drawings, standards and specifications. · Familiarity with ISO 9001, AS-9100, AS9102, MIL-STD-810, MIL-PRF-13830, ISO 10-110 and other standards preferred. · Familiarity with control of government property preferred · Ability to use test equipment such as thermal, salt and humidity chambers and other test equipment preferred. · Understanding of APQP, PPAP, FMEA, DVT, DFM, DOE, Gage R&R, Measurement Analysis, SPC, Six Sigma, Lean Manufacturing, 5S, DMAIC, PDCA, FAI, etc. · Ability to work well with people · Self-starter, capable of working with very little direction · Good oral and written communication skills · Good Multi-Tasking skills · Ability to read, analyze and interpret complex documents. Ability to communicate effectively to team members and management. · Ability to apply advanced mathematical concepts. · 5 years’ experience in quality, manufacturing, optical or engineering fields. · A.A.S. in Quality, Engineering, Technology or Business discipline · B.S. Preferred · ASQ Certifications favorable You Are: · Results-Oriented: Motivated, hard-working and ready to level-up. · Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge. · Process Oriented: Well organized, demonstrating attention to detail. · Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude. · Accountable: Demanding the highest quality from yourself and team members. · Detail-Oriented: Have excellent time management and organizational skills. · A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude. · A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” Work environment & Physical Demands: · Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus and see colors. May involve prolonged periods of magnified inspection (eye strain) • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp. · Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided) · Generally works in a clean environment and works to maintain the environment as such. · Safety Glasses are required · May require area specific safety training • This position works in a manufacturing environment. The noise level in the work environment is usually moderate-loud., • The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles., • May work at different workstations as production needs require, or shifts from one station to another, during the production process. You Will Enjoy: · Growth: The opportunity to learn and advance your career, internal training and advancement opportunities, Tuition Reimbursement Program. · Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match, company contributions to medical savings plans. · Wellness: Health, Dental, Vision Insurance. Company provided Life Insurance and Disability Insurance. · Balance: 11 paid holidays, generous paid vacation and sick time · Culture: an energetic, value-driven team where you will experience the reward of meaningful work! Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. Monday-Friday 7am - 3:30pm

Job Description Title Optical Fabricator 1, C Shift Department Centering, Optics Fabrication Reports to Centering Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join to RPO team! Job Summary: The successful candidate will have a minimum of 3-5+ years of experience in Conventional & CNC Machining of Precision Optical Components; Produces machined parts by setting up, and operating a conventional optical equipment, as well as computer numerical control (CNC) machines - maintaining quality and safety standards; keeping records; maintaining equipment and supplies. You will: • Develop, lead and run programs of CNC machining by studying work orders, blueprints, engineering plans, materials, specifications, orthographic drawings, reference planes, locations of surfaces, and machining parameters; interpreting geometric dimensions and tolerances (GD&T)., • Responsible in reviewing final machining and sizing of components as required supporting prototype, pre-production, production programs and rework to include documentations., • Responsible for set-up and maintaining Nakamura-Tome Centering Machines., • Set-up and maintain process on CM-2/C-2/C-50 CNC Centering Machines. Center lenses to print specifications., • Maintains specifications by observing in process inspection methods adjusting and reprogramming controls’ sharpening and replacing worn tools; adhering to quality assurance procedures and processes., • Provide technical support for engineering services including process development and review, tooling design and labor estimates., • Provides training to production employees on key processes and procedures as applicable to their respective production area. Analyzes and resolves work problems, or assists workers in solving work-related issues., • Ensures quality of the finished product by continually reinforcing a strong and open working relationship between the quality and production departments., • Must be able to operate mechanical test equipment – calipers, micrometers, comparator and sag gauges., • Understand Lean Manufacturing Fundamentals including 5S standards and housekeeping., • Responsible to ensure department yield levels are kept over 85%., • Sizing, grinding, polishing of optical materials using conventional and/or CNC methods., • Maintain a neat and orderly work area., • Maintain tooling and equipment used during fabrication., • Follow Environmental Health and Safety procedures., • Maintain production records using Epicor tracking system., • Follow work instructions, • Common polishing processes and capable of setting up and running conventional polishing equipment., • Polishing carious radii from plano to strong radius., • Set-up and measure lens radius and surface irregularity using an interferometer., • Inspect and identify lens surface defects per optical industry standards., • Understand and interpret lens drawings and specifications., • Team player on projects, process improvement methods, solutions, and procedures to enhance quality, cost, and scheduling., • Good computer skills are required for lens data recording., • Ability to create tooling (from wax polishers) and support tooling for polishing process. You Have: • Ability to apply basic mathematical concepts. Competent shop math and algebra skills required., • Computer programing/CNC skills, • Ability to stand for extended periods of time., • Ability to be flexible. Shift adjustments and Overtime may be periodically required as business needs dictate., • Ability to read, analyze and interpret complex documents. Ability to communicate effectively to team members and management., • Apprenticeship or equivalent experience in related disciplines., • 3-5+ years’ experience, plus experience in Conventional and CNC Machining – precision optical equipment preferred., • Results-Oriented: Motivated, hard-working and ready to level-up., • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge., • Process Oriented: Well organized, demonstrating attention to detail., • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude., • Accountable: Demanding the highest quality from yourself and team members., • Detail-Oriented: Have excellent time management and organizational skills., • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude., • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career, internal training and advancement opportunities, Tuition Reimbursement Program., • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match, company contributions to medical savings plans., • Wellness: Health, Dental, Vision Insurance. Company provided Life Insurance and Disability Insurance., • Balance: 11 paid holidays, generous paid vacation and sick time, • Culture: an energetic, value-driven team where you will experience the reward of meaningful work! Work Requirements & Physical Demands: • While performing the duties of this job, the employee is regularly required to stand: use hands to fingers, handle or feel: and reach with hands and arms. The employee frequently is required to stand, walk, stoop, kneel, crouch: and talk and hear., • The job may involve prolonged periods of sitting/standing., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain), • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp., • The employee is frequently required to use the computer., • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally works in a clean environment and works to maintain the environment as such., • Safety Glasses are required, • May require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually moderate-loud., • The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles., • May work at different workstations as production needs require, or shifts from one station to another, during the production process. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. Monday- Friday, C Shift. 10:00pm-6:30am *10% Differential pay offered for C shift Training will take place on A shift before transitioning to a C shift Schedule: Monday - Friday 6am - 2:30pm

Job Description Title Injection Molding Clean Room Manager Department Plastics Reports to Director of Operations SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join the RPO team! Job Summary: RPO is seeking a driven, hands-on Injection Molding Clean Room Manager to lead and optimize our advanced plastics injection molding group. Our environment demands a trusted expert, a compassionate problem solver and a roll-up-your-sleeves leader. The ideal candidate brings exceptional operational experience, technical insight and an empowering leadership style that can guide and evolve a dynamic team through complex challenges toward excellence. This is a foundational leadership role – someone who can walk in, assess the landscape with discernment, and immediately begin implementing calculated changes to align performance with potential. You’ll be the go-to authority, the team mentor, and the strong presence our production floor deserves. This role is pivotal in helping us establish our first plastics clean room operation—from concept to execution—while also managing day-to-day molding operations and leading a high-performing team. You will: • Oversee daily production activities within the clean room-based plastic injection molding department, ensuring operations meet stringent safety, efficiency, and quality standards required by regulated environments., • Participate in the design, layout and processes of a new cleanroom facility, • Drive continuous improvement initiatives focused on throughput, cost reductions and waste minimization., • Build and implement standardized work instructions and preventative maintenance protocols., • Monitor and enforce compliance with ISO and clean room regulatory standards., • Oversee equipment selection, procurement, installation and qualification., • Provide expert-level support in troubleshooting, process optimization, and root cause analysis for molding and clean room issues., • Collaborate with engineering and quality teams on mold design changes, material evaluations, and validation activities., • Own the molding process parameters – responsible for consistent part quality and machine uptime., • Use data driven insights to identify and resolve production bottlenecks., • Inspire and develop production staff through coaching, training, and collaborative goal-setting., • Champion a culture of accountability. Safety and professionalism., • Resolve personnel issuers constructively while fostering growth and mutual respect., • Lead by example: visible, accessible, and always willing to step in and help when needed., • Manage department production capacity and layout, evaluate staffing levels and coordinate adjustments hiring or transfers with manager accordingly., • Review and approve timesheets and time off requests by required deadlines, adjust where necessary., • Maintain regular communication with Director of Operations providing team status, concerns or achievements both verbally and through status boards, IOI’s or reports at the established frequency., • Provide clear and prompt feedback to Sales / Engineering on quotes for new and recurring jobs, detailing all needs and requirements., • Actively participate in week-to-week and month-to-month scheduling, working closely with Planning., • Ensure that data entry is occurring daily at a minimum, and that all required information is being accurately entered by the staff in your area of responsibility., • Implement strategies that promote urgency and focus among production operators, resulting in improved cycle times and throughput., • Take ownership of product quality throughout the production process, fostering accountability across teams to meet internal and external requirements. You have: • 7+ years of experience in Plastic Injection Molding operations, with 3+ years in clean room operations., • Minimum 5 years’ experience in a manufacturing leadership role., • Deep understanding of mold design, machine specs, thermoplastics, tooling., • Bachelor’s degree in manufacturing, engineering or related discipline preferred., • Solid knowledge of all aspects, concepts and tools related to the department and the required disciplines., • Proficiency with interpreting blueprints or drawings for both mechanical and optical standards., • The capability of developing and understanding capacity modeling from available data., • Proficiency with Word, Excel, Power Point, Outlook, Epicor or equivalent MRP/ERP., • Excellent problem solving and communication skills both written and verbal., • Ability to work in a challenging, fast-paced and high-stress environment., • Good mental dexterity and decision making., • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Culture: an energetic, caring, fun, value-driven team. Work Environment & Physical Demands: • While performing the duties of this job, the employee is regularly required to stand: use hands to fingers, handle or feel: and reach with hands and arms. The employee frequently is required to stand, walk, stoop, kneel, crouch: and talk and hear., • The job may involve prolong periods of sitting/standing., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain), • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp., • The employee is frequently required to use the computer., • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally works in a clean environment and works to maintain the environment as such., • Safety Glasses are required, • May require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually loud., • The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles., • May work at different workstations as production needs require, or shifts from one station to another, during the production process. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. Monday - Friday 6am - 2:30pm

Job Description Title Coating Technician I Department Coating Reports to Coating Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join to RPO team! Job Summary: The Coating Technician plays a vital role in the production of high-quality precision optics by applying thin-film coatings to a multitude of different lenses and components. Using specialized vacuum deposition equipment, the technician ensures coatings meet strict performance and durability standards essential for optical clarity and functionality. This position requires careful attention to detail, consistency in process execution and a strong commitment to quality in our manufacturing environment. In addition to coating product, this position will support coating operations to include but may not be limited to; equipment maintenance and preventive maintenance, testing, failure analysis, process development, tooling design, and scheduling. You Will: • Prepare precision optical components for coating by cleaning, masking and inspecting for defects., • Operate and maintain vacuum deposition systems (e.g. e-beam, sputtering, thermal evaporation), • Monitor coating processes and parameters to ensure optimal film performance and uniformity., • Inspect coated optics using spectrophotometers, interferometers and microscopes., • Record process data, quality control metrics and maintenance logs with a strong attention to detail., • Troubleshoot and resolve issues with equipment or coating quality., • Collaborate with engineers and management staff to refine coating processes., • Maintain a clean, organized and safe work environment in accordance with ISO and cleanroom standards., • Measure optical spectra, prepare samples for environmental testing, and provide required data to QA personnel., • Keep accurate and complete coating records, • Daily coater cleanup and perform/ assist during routine large-scale cleanup., • Maintain equipment, tooling, adaptors and work area in accordance with Good Manufacturing Practices, ISO and HSE protocols., • Train Coating associates on job-specific tasks as well as mentoring in the area of coating, testing and spectral measurements., • Work closely with the Coating Manager to understand current capabilities and work toward strategic capability improvements., • Work closely with other functional areas at RPO to improve the flow and quality of components to Coating. You Have: • High School Diploma/GED Required; Associate degree or technical certification in optics, materials science or a related field a plus!, • 1-3 years of experience in optical coating or thin-film technology in a precision manufacturing environment., • Ability to read, analyze and interpret complex documents. Ability to communicate effectively to team members and management., • Strong mechanical aptitude and familiarity with vacuum or precision manufacturing equipment. You Are: • Results-Oriented: Motivated, hard-working and ready to level-up., • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge., • Process Oriented: Well organized, demonstrating attention to detail., • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude., • Accountable: Demanding the highest quality from yourself and team members., • Detail-Oriented: Have excellent time management and organizational skills., • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude., • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” Environment & Physical Demands: • While performing the duties of this job, the employee is regularly required to stand: use hands to fingers, handle or feel: and reach with hands and arms. The employee frequently is required to stand, walk, stoop, kneel, crouch: and talk and hear., • The job may involve prolong periods of sitting/standing., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain)., • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp., • The employee is frequently required to use the computer., • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally works in a clean environment and works to maintain the environment as such., • Safety Glasses are required, and may require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually loud. You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Culture: an energetic, caring, fun, value-driven team. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. Shift Schedule: Monday - Friday, 6am - 2:30pm

Job Description Title CNC Operator 1 - C Shift Department Diamond Turning Reports to Diamond Turning Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join to RPO team! Job Summary: A Diamond Turning Operator, level I is a highly skilled machinist/toolmaker that creates optical surfaces in a variety of materials using high precision machining centers. You will: • Operate and setup diamond turning/grinding machining centers., • Understand CNC programming and have the ability to create and/or modify CNC programs., • Operate and understand Optical test equipment such as interferometers and surface profilometers., • Operate tradition inspection equipment such as toolmaker’s microscope, micrometers, height gages, and vernier calipers., • Ability to read and understand both optical and traditional blue prints., • Possess computer skills. You have: • Ability to read, analyze and interpret complex documents. Ability to communicate effectively to team members and management., • Ability to apply basic mathematical concepts., • High School Diploma or equivalent., • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” Environment & Physical Demands: • While performing the duties of this job, the employee is regularly required to stand: use hands to fingers, handle or feel: and reach with hands and arms. The employee frequently is required to stand, walk, stoop, kneel, crouch: and talk and hear., • The job may involve prolong periods of sitting/standing., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain), • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp., • The employee is frequently required to use the computer., • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally works in a clean environment and works to maintain the environment as such., • Safety Glasses are required and May require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually loud., • The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles.May work at different workstations as production needs require, or shifts from one station to another, during the production process. You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Culture: an energetic, caring, fun, value-driven team. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. RPO offers a competitive work life balance with the opportunity to grow within a unique industry and along with a collaborative, motivated team to drive key programs. C shift hours: 10pm-6:30pm Training takes place Monday-Friday 6am-2:30pm

Job Description Career Strategies is hiring a full-time Apartment Maintenance Supervisor for an apartment community in Rochester, NY to start immediately! If you are available to start work immediately please reach out today and start work tomorrow! Apartment Maintenance Supervisor is responsible for general maintenance and will be responsible managing maintenance staff. Excellent customer service experience required. Successful candidates will work to ensure the highest level of resident satisfaction at all times. Job Title: Maintenance Supervisor Hours: Full-Time Must have a minimum of 2 year of Apartment Maintenance Supervisor Experience. Will be responsible for overseeing: · Electrical · Plumbing · HVAC (HVAC certification a plus but not required) · Carpentry · Drywall · Painting · Appliance repair and a variety of maintenance tasks, including cleaning up the grounds, at our communities. · Scheduling Vendors · Scheduling Turns · Overseeing Maintenance Team. · ON CALL ROTATION TO BE CONSIDERED FOR THIS POSITION PLEASE RESPOND TO THE POSTING WITH YOUR RESUME. Should you be interested in this opportunity and meet the requirements above please contact our office at 720-489-1053! Equal Opportunity Employer. Thorough background required. Company DescriptionFounded in 1989, Career Strategies has built its foundation on listening to the needs of candidates and clients and finding the ideal match. Our Property Management division has expanded across the nation with 20 office locations and a national division providing staffing solutions coast-to-coast. Specifically, our property management team provides temporary, temporary-to-hire and full-time talent to multi-family housing communities.Founded in 1989, Career Strategies has built its foundation on listening to the needs of candidates and clients and finding the ideal match. Our Property Management division has expanded across the nation with 20 office locations and a national division providing staffing solutions coast-to-coast.\r\n\r\nSpecifically, our property management team provides temporary, temporary-to-hire and full-time talent to multi-family housing communities.

Job Description The Residence Inn® by Marriott Rochester/ Henrietta is seeking a Houseperson to join their team! A Houseperson will be responsible for maintaining the cleanliness and general appearance of public areas (lobby, hallways, restrooms) of the hotel. Cleans rugs, carpets. Maintains storage closets with linens, towels, cleaning supplies. Assists in stocking the room attendants’ carts with supplies. Assists with various housekeeping and maintenance tasks as assigned by supervisor. About Buffalo Lodging Associates: Buffalo Lodging Associates, a hotel management company based out of Canton, MA has put an emphasis on true hospitality since being founded in 1996. While building an extensive portfolio of 50 hotels, we’ve partnered with the most respected hotel brands in the business including Marriott International, Hilton Worldwide, InterContinental Hotels Group, and Choice Hotel International hotels. Buffalo Lodging Associates is a community of welcoming, committed, and passionate associates driven to provide a best-in-class hospitality experience and operational excellence. Pay range: $16-$17 What You Bring: The ideal candidate is one who embodies Buffalo Lodging’s culture and core values: Excellence, Passion, Integrity, Inclusive. For the most success in this role, requirements are as follows: • Hotel housekeeping experience, • Flexibility to work weekends and holidays, • Great customer service skills What We Offer You: At Buffalo Lodging, we are committed to keeping our most important assets – our employees – healthy, happy and productive. To achieve this, we offer a variety of benefits including the following: • Paid Weekly (Every Friday!), • Medical, Dental & Vision Insurance, • Competitive 401 (k) Retirement Savings Plan with Generous Employer Match, • Paid Vacation and Sick Time, and holidays

Job Description Title Assembler Department Assembly Reports to Assembly Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join to RPO team! Job Summary An RPO Assembler will be responsible for producing high precision assemblies or components with strict adherence to established work instructions and specification sheets. The job requires a very high level of concentration and fine detail, along with the ability to maintain consistent process proven by frequent in process inspection. In addition to processing parts, an assembler will perform testing using various optical test equipment and will also maintain all required build records. This role will be performed in a class 10,000 clean room. You Will: • Use tools and equipment to produce high precision assemblies or components and meet daily production targets, • May require the use of test equipment to measurements of completed work and work in process, • Weight, properly label and transfer chemicals and adhesives for use in assembly, • Communicate with lead, supervisor or area manager about any issues or problems in production immediately, • Process parts or components on jobs in que 100% of your available time, • Ensure that all required data entry is occurring for each job and that all required information is being accurately entered, • Adhere to check good pass good inspection criteria and in process inspection for all jobs, this includes daily calibration and expiration checks for all areas work is to be done., • Strict adherence to trained process / work instruction and ownership of communicating any inconsistencies, questions or issues, • Clean and maintain tooling, machinery and work area daily, • Follow all company safety precautions, policies and procedures. You Have: • Minimum of 2 years’ experience in a fast-paced, production/manufacturing environment related to precision assembly or equivalent work experience desired, • Optical Assembly experience a plus!, • GED or High School diploma – prefer vocational education, • Familiarity with computers to include but not limited to Microsoft Office, • Proficient math skills, • Ability to follow, repeat and adhere to detailed instructions while maintaining an attention to detail, • Ability to work in a challenging, fast paced and high-stress environment, • Good mental dexterity and visual acuity, • Excellent communication skills, • Can maintain clean environment and works to maintain the environment as such., • Good time management skills You Are: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Culture: an energetic, caring, fun, value-driven team. Physical Demands: • While performing the duties of this job, the employee is regularly required to stand, reach with hands and arms and to use hands and fingers to handle, maneuver parts, • The employee frequently is required to stand, walk, stoop, kneel, crouch, talk and hear, • The job may involve prolong periods of sitting/standing, • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain), • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp, • The employee is frequently required to use the computer, • The job may require regular lifting of up to 50 lbs., • Job requires flexibility in schedule and potential overtime or weekend work Work Environment: • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally, works in a clean environment and works to maintain the environment as such., • Safety Glasses are required, • May require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually loud., • The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles., • May work at different workstations as needs require Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. B Shift Monday-Friday 2pm-10:30pm

Job Description ZAMBONI DRIVER GENERAL JOB DESCRIPTION: Under the supervision of the rink manager and supervisor, this position is responsible for driving the Zamboni correctly and safely to ensure and maintain acceptable ice conditions. Successful candidates will be trained completely on the operation and daily maintenance of the Zamboni. Additional job functions will include the following: • Add extra water to maintain ice as scheduled., • Participate in keeping all areas of the facility neat, clean and safe at all times. These duties include sweeping and mopping the rink restrooms, locker rooms, shower areas, lobby, meeting rooms, bleachers and removing trash, changing lights, cleaning rink glass, etc., • Making sure all entrances are clear and safe of debris and snow., • Offer excellent customer service to all patrons. Greet customers with a smile and respond to their needs in a kind and courteous manner., • Handle all phone inquiries in the same kind and courteous manner., • Sharpen skates. Full training in this area will be provided., • Sell rink related items. These items include tape, skate laces, mouth guards, etc., • Process all cash received accurately and complete all reports as required., • Open and/or close the facility as required by completing all security procedures., • Be available to work nights and weekends. SKILLS REQUIRED: • Must be able to work well in a team environment., • Must be highly motivated to learn new skills, (ice resurfacing, ice edging), that are essential for a successful rink operation., • Must have the ability to supervise and offer direction to rink attendants., • Must have the ability to solve problems as they arise and be able to perform tasks without supervision., • Must be able to assume a positive and active role at the rink, even while working under potentially stressful conditions (weather, upset or injured participants, etc.)., • Must have the ability to be firm with participants when necessary and make sound decisions in order to ensure the safety and well being of participants, facilities and equipment. An ability to interact and communicate well with others is essential., • Ability to understand and carry out verbal and/or written instructions efficiently and effectively. This will include the ability to complete daily reports. An understanding of basic mathematics is required to successfully complete these reports., • Be able to follow safety guidelines and exercise good judgment in all aspects of responsibility.

Job Description Title Assembler Department Assembly Reports to Assembly Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join to RPO team! Job Summary An RPO Assembler will be responsible for producing high precision assemblies or components with strict adherence to established work instructions and specification sheets. The job requires a very high level of concentration and fine detail, along with the ability to maintain consistent process proven by frequent in process inspection. In addition to processing parts, an assembler will perform testing using various optical test equipment and will also maintain all required build records. This role will be performed in a class 10,000 clean room. You Will: • Use tools and equipment to produce high precision assemblies or components and meet daily production targets, • May require the use of test equipment to measurements of completed work and work in process, • Weight, properly label and transfer chemicals and adhesives for use in assembly, • Communicate with lead, supervisor or area manager about any issues or problems in production immediately, • Process parts or components on jobs in que 100% of your available time, • Ensure that all required data entry is occurring for each job and that all required information is being accurately entered, • Adhere to check good pass good inspection criteria and in process inspection for all jobs, this includes daily calibration and expiration checks for all areas work is to be done., • Strict adherence to trained process / work instruction and ownership of communicating any inconsistencies, questions or issues, • Clean and maintain tooling, machinery and work area daily, • Follow all company safety precautions, policies and procedures. You Have: • Minimum of 2 years’ experience in a fast-paced, production/manufacturing environment related to precision assembly or equivalent work experience desired, • Optical Assembly experience a plus!, • GED or High School diploma – prefer vocational education, • Familiarity with computers to include but not limited to Microsoft Office, • Proficient math skills, • Ability to follow, repeat and adhere to detailed instructions while maintaining an attention to detail, • Ability to work in a challenging, fast paced and high-stress environment, • Good mental dexterity and visual acuity, • Excellent communication skills, • Can maintain clean environment and works to maintain the environment as such., • Good time management skills You Are: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Culture: an energetic, caring, fun, value-driven team. Physical Demands: • While performing the duties of this job, the employee is regularly required to stand, reach with hands and arms and to use hands and fingers to handle, maneuver parts, • The employee frequently is required to stand, walk, stoop, kneel, crouch, talk and hear, • The job may involve prolong periods of sitting/standing, • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain), • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp, • The employee is frequently required to use the computer, • The job may require regular lifting of up to 50 lbs., • Job requires flexibility in schedule and potential overtime or weekend work Work Environment: • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally, works in a clean environment and works to maintain the environment as such., • Safety Glasses are required, • May require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually loud., • The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles., • May work at different workstations as needs require Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. RPO offers a competitive work life balance with the opportunity to grow within a unique industry and along with a collaborative, motivated team to drive key programs.

Job Description Title Coating Technician I - C Shift Department Coating Reports to Coating Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join to RPO team! Job Summary: The Coating Technician plays a vital role in the production of high-quality precision optics by applying thin-film coatings to a multitude of different lenses and components. Using specialized vacuum deposition equipment, the technician ensures coatings meet strict performance and durability standards essential for optical clarity and functionality. This position requires careful attention to detail, consistency in process execution and a strong commitment to quality in our manufacturing environment. In addition to coating product, this position will support coating operations to include but may not be limited to; equipment maintenance and preventive maintenance, testing, failure analysis, process development, tooling design, and scheduling. You Will: • Prepare precision optical components for coating by cleaning, masking and inspecting for defects., • Operate and maintain vacuum deposition systems (e.g. e-beam, sputtering, thermal evaporation), • Monitor coating processes and parameters to ensure optimal film performance and uniformity., • Inspect coated optics using spectrophotometers, interferometers and microscopes., • Record process data, quality control metrics and maintenance logs with a strong attention to detail., • Troubleshoot and resolve issues with equipment or coating quality., • Collaborate with engineers and management staff to refine coating processes., • Maintain a clean, organized and safe work environment in accordance with ISO and cleanroom standards., • Measure optical spectra, prepare samples for environmental testing, and provide required data to QA personnel., • Keep accurate and complete coating records, • Daily coater cleanup and perform/ assist during routine large-scale cleanup., • Maintain equipment, tooling, adaptors and work area in accordance with Good Manufacturing Practices, ISO and HSE protocols., • Train Coating associates on job-specific tasks as well as mentoring in the area of coating, testing and spectral measurements., • Work closely with the Coating Manager to understand current capabilities and work toward strategic capability improvements., • Work closely with other functional areas at RPO to improve the flow and quality of components to Coating. You Have: • High School Diploma/GED Required; Associate degree or technical certification in optics, materials science or a related field a plus!, • 1-3 years of experience in optical coating or thin-film technology in a precision manufacturing environment., • Ability to read, analyze and interpret complex documents. Ability to communicate effectively to team members and management., • Strong mechanical aptitude and familiarity with vacuum or precision manufacturing equipment. You Are: • Results-Oriented: Motivated, hard-working and ready to level-up., • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge., • Process Oriented: Well organized, demonstrating attention to detail., • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude., • Accountable: Demanding the highest quality from yourself and team members., • Detail-Oriented: Have excellent time management and organizational skills., • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude., • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” Environment & Physical Demands: • While performing the duties of this job, the employee is regularly required to stand: use hands to fingers, handle or feel: and reach with hands and arms. The employee frequently is required to stand, walk, stoop, kneel, crouch: and talk and hear., • The job may involve prolong periods of sitting/standing., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain)., • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp., • The employee is frequently required to use the computer., • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally works in a clean environment and works to maintain the environment as such., • Safety Glasses are required, and may require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually loud. You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Culture: an energetic, caring, fun, value-driven team. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. C Shift: Monday - Friday, 10pm - 6:30am. 10% Shift differential offered to C shift employees. Training will take place on A shift before transitioning to a C shift Schedule: Monday - Friday 6am - 2:30pm

Job Description Job purpose This position is responsible for final processing of magnets received from our manufacturing floor. This can involve the following tasks: Cleaning and Visual inspection, Magnetizing, Calibration/Testing, and Packaging. Duties and responsibilities • Setup and operate the equipment per technical instructions., • Change machine fluids and clean machine and tanks per PM log., • Operate multiple machines at once., • Review Operation Sheet to assure all previous operations have been satisfactorily completed., • Sign off the operation sheet and note the quantity of good and bad pieces when the operation has been completed, • Maintain part and identification during processing., • Properly identify nonconforming material., • Verify completed operations match blue prints., • Maintains tooling to perform at maximum efficiency., • Report any wear and tear., • Maintain an immaculate work environment and machine work area., • Follow company written policy and documented procedures., • Must possess as a minimum a High School Diploma or Equivalent., • Previous experience in a manufacturing setting preferred., • Experience handling fragile materials., • Experience in lean manufacturing environment is desired., • Experience operating within AS9100 (preferred) or ISO systems., • Great communication skills, • Able to work in a small team setting., • May be exposed to industrial oils, toner, coolants, solvents, lubricants, adhesive and other chemicals. NOTE: All safety precautions will be used., • Plant wide climate control and air conditioning, • Could require intermittent and long periods of sitting and/or standing., • Required to do repetitive work. Monday - Thursday: 2:45pm - 12:15am Friday: 2:45pm-6:45pm Arnold Magnetic Technologies is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Minority/Female/Sexual Orientation/General Identity/Disability/Veteran

Job Description Job purpose This position is responsible for final processing of magnets received from our manufacturing floor. This can involve the following tasks: Cleaning and Visual inspection, Magnetizing, Calibration/Testing, and Packaging. Duties and responsibilities • Setup and operate the equipment per technical instructions., • Change machine fluids and clean machine and tanks per PM log., • Operate multiple machines at once., • Review Operation Sheet to assure all previous operations have been satisfactorily completed., • Sign off the operation sheet and note the quantity of good and bad pieces when the operation has been completed, • Maintain part and identification during processing., • Properly identify nonconforming material., • Verify completed operations match blue prints., • Maintains tooling to perform at maximum efficiency., • Report any wear and tear., • Maintain an immaculate work environment and machine work area., • Follow company written policy and documented procedures., • Must possess as a minimum a High School Diploma or Equivalent., • Previous experience in a manufacturing setting preferred., • Experience handling fragile materials., • Experience in lean manufacturing environment is desired., • Experience operating within AS9100 (preferred) or ISO systems., • Great communication skills, • Able to work in a small team setting., • May be exposed to industrial oils, toner, coolants, solvents, lubricants, adhesive and other chemicals. NOTE: All safety precautions will be used., • Plant wide climate control and air conditioning, • Could require intermittent and long periods of sitting and/or standing., • Required to do repetitive work., • Periodic lifting of materials not to exceed 50 pounds. Arnold Magnetic Technologies is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Minority/Female/Sexual Orientation/General Identity/Disability/Veteran

Job Description Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning QS:9000, ISO:9002, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: Performs custodial maintenance duties on a daily basis, including dusting, mopping, finishing and buffing floors, vacuuming and shampooing carpets, cleaning and restocking restrooms. Minimum Qualifications: • Must be able to stand, crouch, bend, stretch, creep and crawl, • Must be able to do occasional heavy lifting (50+ lbs.), • Must grasp with hands, have full range of motion with arms. Specific Duties: • Vacuum all carpeted areas, • Empty waste bins from offices and empty trash cans in the factory, • Water plants, • Add water to humidifiers, • Dust the office area and polish all office furniture, • Clean all plant and office room areas, • Sweep and mop lunchroom, • Use walk behind floor scrubber daily on factory floors, • Sweep, clean, mop restrooms in office and plant, • Clean interior windows of building, • Periodically clean light fixtures and ventilation ducts., • Maintain inventory on all cleaning supplies, • Empty and dispose of recycled material, • Clean and polish drinking fountains daily, • Sweep, mop and wax all hallway floors, • Keep outside building and fenced perimeter free of paper and trash, • Perform all duties in a professional manner This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Job Description Classification: Non-Exempt We are Alsco Uniforms. We’ve been working hard for our customers since 1889 when we invented the uniform and linen rental industry. Alsco Uniforms has grown into a worldwide leader serving over 350,000 customers in 13 countries. It’s our job every day to make every aspect of the customer experience better. Whatever our customers need, Alsco Uniforms finds the answers that work for them. Our employees are the heart and soul of Alsco Uniforms. As a result, we have a long history of strong financial performance, continuous improvement, and customer service. We’re seeking driven professionals with ambition to grow within our company. We’d love to talk to you about how you can fit into our team of diverse individuals and how your hard work will be rewarded with competitive pay and benefits and ongoing career development. Join our team and build your career with Alsco Uniforms! Job Summary: The Custodian is responsible for general maintenance and cleanliness of equipment, facilities and grounds. This position is also referred to as Janitor. Performs other tasks as required. Our full-time employees enjoy: • Medical, Dental, Vision, FSA/HSA, • Life Insurance, Disability Insurance, • Vacation, Sick Time, Holidays, • Choice of Global Cash Card or Direct Deposit, • Career Advancement, • Learning & Development Opportunities Essential Functions: • Performs heavy cleaning duties such as clean plant equipment using compressed air and other methods., • Scrub, sanitize, vacuum, sweep and mop., • Dispose of trash, clean up spills, replace air fresheners, change out light bulbs, lock doors, paint, maintain water coolers, prepare facilities for events such as meetings or banquets., • Clean offices, bathrooms, break rooms and other areas., • Move furniture, supplies, textiles or equipment within departments or into storage and assist other departments with other tasks., • Apply insecticides and fumigants, trim shrubbery and perform other outside maintenance, clear walkways of snow or leaves., • Participate in Safety programs such as committees or emergency contingency, use Personal Protective Equipment as needed, notify supervision of repair needs, spills, safety concerns or hazardous situations., • Keep records of maintenance, monitor cleaning supplies, restock supplies in bathrooms, break rooms and other areas., • Operate a powered industrial truck to move, transfer, load and unload., • Continuously meet efficiency and safety standards for the position., • Follow instructions as directed by supervision., • Keep work area neat and clean., • Perform other tasks as required. Additional Functions: • Work in other production positions as needed. Qualifications: • Recognize colors and sizes, count and sort accurately., • In some locations, be able and certified to safely operate a powered industrial truck., • Basic knowledge of cleaning products and procedures or willing to learn., • Ability to prioritize multiple tasks and work effectively with a team., • Work independently, comprehend and follow written or verbal direction. Education: • No requirement. Typical Physical Activity: • Physical Demands consist of standing, walking, bending, reaching, twisting, working in cramped areas, reaching overhead, pushing, pulling, grasping, lifting up to 90 lbs., carrying up to 50 lbs., and stooping. Typical Environmental Conditions: • Inside and outside areas of a typical industrial laundry facility, which includes working with and around large machinery, in general offices, outside grounds, variations in temperature, odors, humidity, lint and dust. Travel Requirements: • none., • Physical requirements consist of being able to meet the physical demands for the entire shift. For a general description of benefits that are being offered for this position, please visit alsco.com/benefits. Alsco Uniforms is an Equal Employment Opportunity Employer. Candidates are considered for employment with Alsco Uniforms without regard to their race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status (specifically status as a disabled veteran, recently separated veteran, armed forces service medal veteran, or active duty wartime or campaign badge veteran), or other classification protected by applicable federal, state, or local law. Revised: 04/29/2022

Job DescriptionDescription: General Description: Part-time Laborer will be responsible for performing routine duties associated with the day-to-day activities of the operations/maintenance department. Duties include but not limited to manual labor, event set-up and tear-down activities, compliance with equipment handling guidelines, equipment storage, operating mechanical equipment, equipment inspections, general housekeeping and custodial duties, policing public areas and such other duties as required by the Labor Foreman or Shift Leader on duty. Position reports to Labor Foreman or Shift Leader on duty. Primary Responsibilities: • Works as scheduled; wears complete uniform including name badge., • To act in a professional manner at all times., • Maintain radio contact throughout entire shift., • Lift moderate to heavy amounts of weight in the form of tables, chairs, stanchions, staging and step units, dance floor panels, and exhibition materials., • Push equipment carts, door panels, and staging/step units as required., • Cleaning floors, carpet, glass, stainless steel, painted surfaces, mirrors, vinyl tile, concrete, and woodwork., • Mopping, stripping, waxing, and sealing composition floors., • Vacuuming and shampooing/extracting carpets and chairs., • Policing and cleaning restroom areas and public areas., • Dusting and vacuuming office furniture and draperies., • Walking, standing, sitting, stooping, and lifting objects as required., • Implementation of basic cleaning methods as required in the maintenance of exterior grounds and interior areas., • Completion of tasks assigned in compliance with basic safety guidelines., • Sweeping, mopping, and removing dirt, water, and ice as required., • Performing grounds maintenance during inclement weather as required., • Completion of tasks and daily assignments as assigned in a cooperative manner., • Perform general manual labor associated with set-up, custodial, maintenance, or housekeeping functions., • Maintain public image of the Operations/Maintenance Department at all times while working., • Maintain an irregular work schedule as required by the Labor Foreman for the servicing of scheduled events and routine assignments. 20. Such other duties, functions, special projects, and responsibilities as assigned by the Shift Leader of Labor Foreman. Additional Responsibilities: • As a highly visible employee, the part-time maintenance worker shall maintain the public image of the Convention Center as required., • Position requires individual to work irregular work schedule including day, evening, holidays, and weekends; occasional overtime., • Minimum high school education or equivalent required., • Up to one (1) year experience in a set-up or related position., • Up to one (1) year experience in a custodial/housekeeping position., • Ability to demonstrate basic set-up techniques with a working knowledge of set-up principles, procedures, and equipment use., • Ability to demonstrate basic cleaning techniques., • Ability to perform manual tasks requiring physical strength and perform reasonably heavy labor., • Ability to operate heavy mechanized equipment., • Ability to follow written and/or verbal instructions accurately., • Related training and experience gained which offers a further understanding of set-up, custodial house - and ground–keeping techniques is desirable.

Job Description Building Custodian – Full Time, Monday-Friday 7:30AM – 4:30PM PURPOSE: Assist Building Manager with maintaining the physical condition of the property according to company operating and safety standards and with adhering to budget guidelines, consistent with the goals of the company by performing the following duties: Duties & Responsibilities: Essential Duties and Functions are numbered in the list below. Non-Essential Duties may also be listed if appropriate for the position description. Maintain the physical condition of the property according to company operating and safety standards Be vigilant of property condition in consideration of issues affecting curb appeal and safety. Immediately report to supervisor (or another manager if supervisor is unavailable) any physical condition of the property that jeopardizes safety or is otherwise needing repair. Organize, prioritize, and ensure that service requests and repairs are made correctly and in a timely manner (within 24 hours or per property policy.) Ensure that vacant suites are maintained in a show-ready condition. Be attentive of contractors performing work on property and report any unsafe or inappropriate observations to supervisor. Similarly, report activities by any parties that seem inappropriate or questionable to you. Assist with purchasing supplies by following established policies and procedures. Monitor inventory of parts and supplies. Maintain a high level of customer service, including communicating effectively with tenants and their employees, co-workers, vendors and supervisors. Assist with preventive program that minimizes emergency repairs, service requests and the use of outside contractors. Requires ability to serve on-call, except during approved vacation periods or otherwise formally excused. Extended working hours should be anticipated to meet challenging and inconsistent demands of property, including seasonal issues such as snow removal, emergency repairs, etc... Maintain polite and professional customer service and co-worker relationships. Attend and participate in technical training programs to maintain personal skill level. Maintain hazard communications program and promote safe work practices. Contract with outside vendors when necessary. Other duties as necessary or assigned. Supervision Provided: Reports directly to Building Manager and works independently most of the time. QUALIFICATIONS To perform this position successfully an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Education & Experience (minimum required to enter the position): No specific level of education is required. Minimum of one to two years of previous experience or comparable experience in property management maintenance, other building maintenance or a related trade. Required Skills or Knowledge: Must be able to diagnose problems with and repair the following: · Basic plumbing · Basic electrical · Dry wall · General carpentry · Painting/Staining · Snow/Ice removal · Carpet, vinyl and ceramic tile repair · Install and rekey locks · Cleaning / General housekeeping · Mold awareness · Asbestos awareness (when applicable) Technical Competencies: Valid Driver’s License, current automobile insurance and acceptable driving record. Other licenses and certifications as required by federal, state and local law. Language Skills: Ability to read and interpret documents in English, such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to understand safety rules and instructions by direction and physical observation. Mathematical Skills: Ability to perform basic math. Reasoning Ability: Ability to apply common sense understanding to carry out written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Physical Demands and Environmental Conditions: Spend 90% + of time performing hands on cleaning, snow removal & minor repairs/maintenance. Ability to transport or move a minimum of 50 lbs. variable distances; the mobility and flexibility to use ladders and to access and work in confined spaces or at heights in excess of eight to nine feet Ability to work outdoors in temperatures exceeding 90 degrees or below 10 degrees Fahrenheit. Ability to personally perform general maintenance repair tasks without endangering themselves, tenants or co-workers. Equipment Used: Employee is required to provide and maintain basic hand tools. This position may require the use of the employee’s personal vehicle. Ability to drive a vehicle without jeopardizing the safety of tenants and fellow co-workers. Ability to use general maintenance equipment, including but not limited to: hand tools, ladders, paint equipment, shampooers, snow blowers, power washer and required safety equipment. Requires individual to wear maintenance uniform and any necessary personal protective equipment (PPE.) WHAT WE OFFER – We offer competitive pay and benefit packages including medical, dental, vision, life insurance, 401k, paid holidays, vacation, PTO and many more THE NEXT STEP - We look forward to getting to you know you through our application process.

Job DescriptionDescription: About First Learning Starting in 2017, Care-a-lot expanded from 3 childcare centers to 13, including the acquisition of Generations Childcare. Now operating as First Learning, a parent company name which encompasses both brands, we mark a significant milestone in our continued growth trajectory. Our focus remains on our commitment to providing exceptional childcare services and has been recognized among North America's top 50 for-profit childcare organizations by Exchange Magazine. Position Purpose: Performs custodial duties to include overall building and grounds maintenance and repair functions. The cleaner is accountable for maintaining the cleanliness, sanitary conditions and general upkeep of the facilities, both inside and outside. Reports To: Facilities Manager Essential Functions: Follows and completes the center's daily, weekly and monthly cleaning schedule. These duties include: • Collects and bags all garbage from the center, and disinfects and cleans garbage and trashcans, • Washes and sanitizes bathrooms fixtures daily with germicidal solution., • Wet mops all washable floors daily including kitchen, bathroom, office and classroom., • Washes bathroom, kitchen, classroom and other windows (inside and outside) and as scheduled or needed., • Vacuuming carpets, • Sweeps and clears entrance spaces, • Dusts, washes and sanitizes other surfaces as specified., • Performs other cleaning duties as assigned., • Refills paper towel, tissue, toilet paper and hand soap in all dispensers., • Changes light bulbs, as needed., • Reports the following to the Director, or designated staff person: Presence of animals, vermin or insects, need for cleaning supplies or equipment repair in advance, water leaks, and other maintenance needs, all other health and safety hazards noticed., • Performs other custodial duties as assigned.Requirements: Qualifications: Education: Minimum of a high school diploma or equivalent, preferred. Experience: 1 year of custodial experience. A combination of related training and experience may be substituted. Physical/Mental Abilities: • Must be able to perform the job requirements for up to 170 children and adults in the building., • Ability to remain standing and moving for extended periods of time., • Indoors and outdoors in normal environment with some exposure to noise, dust, fumes, vibrations and temperature changes., • Mobility within the building including movement from floor to floor and outside the building., • Ability to lift up to 50lbs. on a repetitive basis., • Flexible to varied assignments and willingness to take direction from others., • Ability to pay attention to details and follow instructions., • Positive attitude with the ability to integrate into a team to work towards the mission and goals of the company, • Ability to work effectively under pressure

Job Description Responsibilities The Mobile Service Technician is responsible for maintaining the fleet for clients and to handle service calls at client locations. Provide service to our customers while maintaining exceptional customer service. This can include: cleaning, maintenance, visual inspection, and removal of parts and attachments. Installation with the help of proper manuals, report writing, disassembly, assembly, parts reuse evaluation, and reconditioning. Rush Truck Centers opens the door to the world of opportunity. We are the largest network of commercial vehicle dealerships across the US representing truck and bus manufacturers. Our franchises include Peterbilt, International, Hino, Isuzu, Ford, IC Bus and Blue Bird. We offer a rewarding career as a leader in the transportation industry. Grow with us as we continue to expand our network of locations and services. Responsibilities: • Maintain all aspects of equipment according to company standards., • Handle basic maintenance of the truck including filling tank with fuel, checking oil, keeping it clean, and making sure required inspections are performed and documented as assigned., • Manage inventory control on the service truck and for keeping the vehicle properly stocked., • Report to the Service Manager and will be assigned duties on a daily basis., • Maintain availability for after-hours service calls and be available for an open work schedule., • Maintain and inventory the supplied tools for the work required in maintaining diesel engine trucks and associated equipment, • Read job order and observes and listens to vehicle in operation to determine malfunction and to plan work procedures., • Utilize various diagnostic equipment to determine malfunction and utilize available technical information to determine and perform correct repair procedure., • Diagnosis, removal and replacement of injectors, pistons, liners, cam shafts, cylinder heads, rod and main bearings, oil pans, clutches, fan hubs, differentials, fifth wheels, brakes, changes or recharges batteries, and replaces transmissions and other parts., • Perform all necessary diagnostic and documentation functions on the company computer system., • Examine protective guards, loose bolts, and specified safety devices on trucks, and makes adjustments., • Lubricate moving parts and drives repaired vehicle to verify conformance to specifications., • Perform preventative maintenance work as requested., • Document and submit necessary paperwork or enter into mobile service program as work performed in an accurate and timely manner., • Respond to customer inquiries regarding the work. Foster positive customer relations., • Advise customer and/or service writer of any repairs or services which should be performed within the next 3 months., • Participate in training and utilize that training in the course of work. Benefits: • We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally Basic Qualifications: • High school diploma or general education degree (GED)., • 7 years' experience as a Class 7 & 8 technician in a dealership or related truck service facility., • Have a current and valid CDL and Medical card as required by the FMVS., • Mechanical aptitude and technical ability is a must., • Must possess a current and valid driver license with a driving record that meets the insurability guidelines set forth by the company’s insurance carrier. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader. RUSHINDTECH

Senior Lifestyle - JobID: 744000062485638 [Room Attendant / Cleaner] As a Housekeeper at Senior Lifestyle, you'll: Be responsible for maintaining the cleanliness of resident apartments and the common areas of the community; Perform general cleaning of resident apartments, hallways and other common a

Senior Lifestyle - JobID: 744000080538770 [Room Attendant / Cleaner] As a Housekeeper at Senior Lifestyle, you'll: Be responsible for maintaining the cleanliness of resident apartments and the common areas of the community; Perform general cleaning of resident apartments, hallways and other common a

Job Description • Assist with patient care as needed, including performing EKG’s., • Accept laundry delivery and put away as necessary., • Assist patients with activities of daily living., • Provide transportation of specimens to Frozen Section lab., • Assist in discharge of patients from the facility., • Clean beds between patients and remake and transfer beds to the Holding Area, as needed., • Responsible for maintaining stock in the PACU, Recovery Lounge, Recovery Lounge Bathroom and Visitor’s Bathroom., • Responsible for annual inventory, as directed by the Purchasing Coordinator., • Responsible for weekly cleaning of PACU and Recovery Lounge., • Responsible for copying of forms or articles, as directed., • Responsible for ordering and maintaining appropriate supply of patients’ nourishments., • Perform daily cleaning of facility as assigned by OR/PACU Charge Nurse or Clinical Manager., • Opening, unloading, and distributing freight., • Perform other duties as assigned by the Charge Nurse or Clinical Manager., • Check and remove laundry bags as they fill., • Discharge patients to car when asked., • Check and restock Recovery Lounge cupboards for day. PACU – Recovery Lounge Assistant Job Description – Page 2 • Restock refrigerator daily., • General cleaning as assigned., • Help out wherever needed in LCS., • Assume responsibility for personal growth by participating in scheduled and mandatory in-services., • Flex schedule to accommodate LCS., • Work late as assigned in advance., • Use good work safety habits., • Other duties as assigned. GENERAL EXPECTATIONS: • Effectively demonstrate concern for customers within or outside the organization., • Effectively and clearly communicate ideas/information both verbally and in writing with co-workers., • Capable of working effectively as a member of a team throughout organization while maintaining mutual cooperation., • Seeks to improve quality in all aspects of work performance., • Actively shows initiative in job position through collaboration, suggestion, self-starting and innovation., • Makes sound, logical decisions, maintains flexibility in changing situations and selects appropriate course of action to achieve desired results. QUALIFICATIONS: • High school diploma, • Health care experience preferred, • Demonstrated ability to communicate effectively

Job DescriptionBenefits: • Competitive salary, • Free uniforms, • Opportunity for advancement IF YOURE PASSIONATE ABOUT WORKING WITH KIDS, YOURE AT THE RIGHT PLACE! If you want a set schedule and want to work with fun folks, Goldfish Swim School is the place for you. APPLY TODAY!!! Goldfish Swim School is Looking for FUN, ENERGETIC individuals who like to splash and play in the pool! We provide the training so no previous instructor experience is required. You just need to LOVE working with children and the water!! We are dedicated to developing our children into confident, life-long swimmers. We would love to have you as part of our program and we hope to see you in our pools soon! Swim Instructors teach students ranging in ages 4 months - 12 years in a 90 degree pool! Looking to fill positions ASAP. Hiring process can take less than 1 week!! We offer: Indoor coaching and training so no experience needed Paid on-the-job training Weekly pay Consistent set schedules Part time and Full time employment opportunities Career Growth Opportunities Inclusive work environment Positive team culture General Requirements: Must have reliable transportation. Promote a positive environment that fosters fun, safety, and learning Treat every student fairly and equally regardless of circumstances and abilities, making each feel good about themselves and encouraging a fun environment. Arrive with ample time to report to position at the scheduled time. Be responsible and fulfill your commitments to scheduled shifts. Ensure the safety of swim lesson students at all times. Provides swim instruction based on the Goldfish Swim School curriculum. Evaluates students progress, and completes required paperwork in a timely manner. Interacts with parents/guardians on the activities and development of students swim skills. Acts as a GFSS ambassador to ensure parental satisfaction. Uses problem solving and creative thinking skills to identify and resolve challenges that students encounter. Inspects pool areas before and after each class for possible maintenance, cleanliness or damage issues. Reports issues to management as appropriate. Maintains and ensures proper storage of all pool equipment. Places and removes lane lines. Performs light cleaning duties such as window washing, deck mopping, trash removal etc. on occasion. Attend required/mandatory training, workshops and in-service training outside of regular working hours. Assume other responsibilities as given by a supervisor. Willingness to cross train as needed Job Qualifications and Skills Ability to work with children Excellent communication and organizational skills Time management skills High energy Strong work ethic

Job DescriptionAre you looking for a FUN and AMAZING place to work? Then look no further! IF YOURE PASSIONATE ABOUT WORKING WITH KIDS, YOURE AT THE RIGHT PLACE! If you want a set schedule and want to work with fun folks, Goldfish Swim School is the place for you. APPLY TODAY!!! Goldfish Swim School is Looking for FUN, ENERGETIC individuals who like to splash and play in the pool! We provide the training so no previous instructor experience is required. You just need to LOVE working with children and the water!! We are dedicated to developing our children into confident, life-long swimmers. We would love to have you as part of our program and we hope to see you in our pools soon! Swim Instructors teach students ranging in ages 4 months - 12 years in a 90 degree pool! Looking to fill positions ASAP. Hiring process can take less than 1 week!! We offer: Indoor coaching and training so no experience needed Paid on-the-job training Weekly pay Consistent set schedules Part time and Full time employment opportunities Career Growth Opportunities Inclusive work environment Positive team culture General Requirements: Must have reliable transportation. Promote a positive environment that fosters fun, safety, and learning Treat every student fairly and equally regardless of circumstances and abilities, making each feel good about themselves and encouraging a fun environment. Arrive with ample time to report to position at the scheduled time. Be responsible and fulfill your commitments to scheduled shifts. Ensure the safety of swim lesson students at all times. Provides swim instruction based on the Goldfish Swim School curriculum. Evaluates students progress, and completes required paperwork in a timely manner. Interacts with parents/guardians on the activities and development of students swim skills. Acts as a GFSS ambassador to ensure parental satisfaction. Uses problem solving and creative thinking skills to identify and resolve challenges that students encounter. Inspects pool areas before and after each class for possible maintenance, cleanliness or damage issues. Reports issues to management as appropriate. Maintains and ensures proper storage of all pool equipment. Places and removes lane lines. Performs light cleaning duties such as window washing, deck mopping, trash removal etc. on occasion. Attend required/mandatory training, workshops and in-service training outside of regular working hours. Assume other responsibilities as given by a supervisor. Willingness to cross train as needed Job Qualifications and Skills Ability to work with children Excellent communication and organizational skills Time management skills High energy Strong work ethic

Job Description The cashier is responsible for general store related duties including operating a cash register, providing excellent customer service, and maintaining a clean, neat and safe work environment. This position may also be cross-trained and responsible for duties including, but not limited to, sorting, pricing, and stocking merchandise. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Greet customers in a friendly and enthusiastic manner within 10 seconds of arrival., • Maintain a friendly, helpful attitude toward the customer. Must possess professional service oriented etiquette at all times., • Assist customers in locating and selecting merchandise., • Address customer concerns in a courteous and respectful manner, while following retail policies. Seek assistance of supervisor, when necessary, to resolve concerns., • Record sales using the cash register while properly packaging merchandise., • Asks every customer for a Round-up donation, maintains a minimum of 25% round up average., • Ensure accurate payment collection., • Maintain proper cash balance in assigned till per over/under policy., • Maintain the sales floor, merchandise displays and other inventory in a clean, neat, and safe manner., • Stocks the sales floor with newly processed merchandise, fitting room go-backs, and new good items as directed., • Maintains interior and exterior of store in a neat, clean, organized manner (including but not limited to vacuuming, dusting, cleaning bathrooms, mopping floor)., • Act as a positive member of the team at the store by receiving and providing ideas or concerns to coworkers and management in a timely and supportive fashion., • Perform other duties as assigned by supervisor. QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. This position is required to work nights, weekends, and holidays. EDUCATION AND/OR EXPERIENCE: High school diploma or GED preferred. Previous retail experience preferred LANGUAGE SKILLS: • Ability to read and understand documents such as receipts, time cards, policy manuals., • Ability to write routine reports., • Ability to speak effectively and communicate clearly to other employees and customers. MATHEMATICAL SKILLS: General math skills required. AVAILABILITY: Must have open and flexible availability, and be willing to work evenings and weekends. WORK ENVIRONMENT: While performing the duties of this job the employee is usually working in a comfortable and store environment. At times this employee may be exposed to the outside environment when receiving donations. The employee will also be exposed to the donation processing area which is a factory-like environment. PHYSICAL DEMANDS: Physical Demands- Cashier Frequency Never Rarely Occasionally Frequently Always Sitting X Standing X Walking X Bending over X Crawling X Reaching Overhead X Crouching X Kneeling X Balancing X Lifting and Carrying 10 lbs. or less X 11 to 25 lbs. X 26 to 50 lbs. X 51 to 75 lbs. X 76 to 100 lbs. X over 100 lbs. X Push/ Pull Max Force 0 to 20 lbs. X 21 to 39 lbs. X 40 to 59 lbs. X 60 to 100 lbs. X Goodwill of the Finger Lakes is an Equal Opportunity Employer. Minority/Female/Sexual Orientation/Gender Identity or Expression/Veteran/Disability

Job DescriptionShifts available 7 days a week - Qualified Applicants should be interested in growing their knowledge of dog training and behavior. Expressed interest in becoming a dog trainer preferred. Central Bark always looks to grow from within! Please send cover letter to Looking for a part-time Doggy Day Care Attendant and Enrichment Specialist to join Central Bark Henrietta! Summary: Responsible for the care and handling of playgroups. We operate 365 days a year; employees are expected to work weekends and holidays in all types of weather. Approximately 60% of your time will be standing on your feet supervising play groups and cleaning up waste indoors and outdoors, 20% will be crating, feeding and bringing dogs to and from owners, and the remaining 20% is spent on general cleaning of the facility. Levels of responsibility will increase according to the level of the employee. Essential Duties and Responsibilities include the follow (other duties may be assigned): • Caring for and supervising play groups of dogs including, playing with dogs, brushing, petting, holding, crating, leashing, collaring, clothing (when jackets are needed), applying first aid, feeding, medicating, cleaning up after dogs, etc., • Works as a team member with others and management in providing dog daycare programs and sleepover services., • Helps to ensure that customer satisfaction is consistently obtained. Helps to support the efficient and effective operation of the facility. Helps to maintain the highest company standards in the delivery of all services. Is directly responsible for duties as assigned by management., • Cleaning duties such as cleaning up dog waste, sweeping, mopping, dusting, disinfecting, shoveling, cleaning crates, and bathing dogs. Is directly responsible for maintaining a clean and safe environment at all times for the dogs in our care., • Is directly responsible for providing and documenting the appropriate information about individual dogs under his/her supervision on the shift change report., • Is responsible for reading and knowing all Company Policies and Procedures.Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Education and/or Experience: Dog-handling skills are preferred. Skills may be in the form of pet ownership, previous pet ownership, working with animals, and attending dog training and/or behavior seminars. Training sessions and seminars may be scheduled during non-working hours where your attendance may be required. Physical Skills: Ability to perform a variety of demanding physical activities, including lifting a minimum of 50 pounds (whether it is a bag of dog food, a crate, or a dog), standing for long periods of time, and enduring extreme outdoor temperatures. Grasping, pinching, and pulling skills are also needed to leash and collar dogs as well as control them. Health: It is required that all employees are current on their Tetanus vaccination. Language Skills. Ability to read dog information including names, medication and feeding instructions, schedules, and the like. Be able to communicate dog issues with management either via written or oral communication. Computer Skills: A basic understanding of Windows-based applications is helpful. Reasoning Ability: An ability to define problems, analyze emergencies, and think on your feet. Dogs can get into scuffles at any time and it is the employees job to keep everyone safe. Reading dogs behavior and catching key indicators of possible conflict is a must to ensure the safety and well-being of the playgroup. At Central Bark, we value our employees as much as we value our furry friends. Our inclusive STAFF culture will focus on: Safety and wellbeing of dogs AND staff Teamwork Accountability FUN Friendly Central Bark will always invest in our team to encourage our culture. With a transparent structure in place, our management team will coach and assist you in maximizing your earning potential. Central Bark Henrietta, NY | Doggy Day Care (centralbarkusa.com)