Gis jobs in El Paso, TexasCreate job alerts

Job Description Are we the road to your future? We are currently searching for an experienced Senior Drainage Project Engineer to support our Southwest Region located in Austin, Houston, McKinney, Rockwall, Round Rock, San Antonio, or Tyler, TX. To be considered for this position, applicants must have, at minimum, 10 years of progressive drainage/water resources and TxDOT experience. What you’ll be doing: • Collecting and analyzing data for inclusion in Project Plans and reports, • Using computer engineering software to design stormwater management and storm drain systems, as well as soil erosion and sediment control systems, • Analyzing and designing hydrologic and hydraulic models for Transportation Improvement projects, • Permitting with different Regulatory and Water Management agencies, • Assisting and preparing project plans using OpenRoads Designer, • Contributing to the preparation and/or modification of considerable scope and complexity engineering reports and calculations for a wide variety of projects, • Preparing and assisting in the preparation of project construction details, quantities, cost estimates and project specifications, • Reviewing project quantity estimates, details, and check calculations and drawings for compliance to project requirements, • Preparing and assisting with the preparation of project schedules, • Collaborating across multiple disciplines, subconsultants, and other professionals to successfully deliver quality projects within budget and schedule, • Overseeing project design activities, supervising production efforts, and mentoring junior level support staff and other designers, • Performing other professional, management, marketing and networking duties as assigned, • Assist with roadway project development and other misc. civil engineering tasks for project design and delivery What you need to have: • Bachelor’s of Science in Civil Engineering, • Valid Professional Engineering Licensure or the ability to acquire it within 6 months, • 10+ years of relative/progressive drainage/water resources and TxDOT experience, • Experience with OpenRoads Designer, Storm CAD, ICPR, HEC-RAS, GIS and/or SUDA software, • Previous TxDOT Drainage design experience and strong knowledge of TxDOT standards and procedures, • Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal regulations may differ from state-specific guidelines, • Valid driver’s license and a satisfactory motor vehicle report (MVR) Bonus points if you have: • Strong interpersonal and communication skills, • Master's in Water Resources field Why Volkert? Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. At Volkert, we pride ourselves on providing all of our employees with competitive compensation, positive work/life balance, and professional development opportunities, as well as fostering a diverse and inclusive workplace in all of our offices nationwide. Key Benefits: • Employee Stock Ownership Plan (ESOP), • Medical, Dental, & Vision, • 401(k) retirement savings plan + employer matching, • Paid Time Off (PTO) and holidays, • Employer-Paid Life/AD&D insurance, • Employer-Paid short-term disability and long-term disability, • Wellness incentives, • Student Debt Retirement Match, • Additional voluntary benefits The words from our Chairman of the Board and Chief Executive Officer, Thomas A. Hand, PE, capture best how you can make an impact while working for Volkert. “For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference.” – Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. #LI-SD1 Texas

Job Description Are we the road to your future? We are currently searching for an experienced Drainage Project Engineer to support our Southwest Region located in Austin, Houston, McKinney, Rockwall, Round Rock, San Antonio, or Tyler, TX. To be considered for this position, applicants must have, at minimum, 4 years of progressive drainage/water resources and TxDOT experience. What you’ll be doing: • Collecting and analyzing data for inclusion in Project Plans and reports, • Using computer engineering software to design stormwater management and storm drain systems, as well as soil erosion and sediment control systems, • Analyzing and designing hydrologic and hydraulic models for Transportation Improvement projects, • Permitting with different Regulatory and Water Management agencies, • Assisting and preparing project plans using OpenRoads Designer, • Contributing to the preparation and/or modification of considerable scope and complexity engineering reports and calculations for a wide variety of projects, • Preparing and assisting in the preparation of project construction details, quantities, cost estimates and project specifications, • Reviewing project quantity estimates, details, and check calculations and drawings for compliance to project requirements, • Preparing and assisting with the preparation of project schedules, • Collaborating across multiple disciplines, subconsultants, and other professionals to successfully deliver quality projects within budget and schedule, • Overseeing project design activities, supervising production efforts, and mentoring junior level support staff and other designers, • Performing other professional, management, marketing and networking duties as assigned, • Assist with roadway project development and other misc. civil engineering tasks for project design and delivery What you need to have: • Bachelor’s of Science in Civil Engineering, • Valid Professional Engineering Licensure preferred or the ability to acquire it within 6 months, • 4 - 6 years of relative/progressive drainage/water resources and TxDOT experience, • Experience with OpenRoads Designer, Storm CAD, ICPR, HEC-RAS, GIS and/or SUDA software, • Previous TxDOT Drainage design experience and strong knowledge of TxDOT standards and procedures, • Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal regulations may differ from state-specific guidelines, • Valid driver’s license and a satisfactory motor vehicle report (MVR) Bonus points if you have: • Strong interpersonal and communication skills, • Master's in Water Resources Why Volkert? Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. At Volkert, we pride ourselves on providing all of our employees with competitive compensation, positive work/life balance, and professional development opportunities, as well as fostering a diverse and inclusive workplace in all of our offices nationwide. Key Benefits: • Employee Stock Ownership Plan (ESOP), • Medical, Dental, & Vision, • 401(k) retirement savings plan + employer matching, • Paid Time Off (PTO) and holidays, • Employer-Paid Life/AD&D insurance, • Employer-Paid short-term disability and long-term disability, • Wellness incentives, • Student Debt Retirement Match, • Additional voluntary benefits The words from our Chairman of the Board and Chief Executive Officer, Thomas A. Hand, PE, capture best how you can make an impact while working for Volkert. “For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference.” – Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. TX Texas #LI-SD1

Job Description Lead Installer Tech About Conterra Conterra Networks creates custom technology-based network solutions for businesses of all sizes nationwide. For over 25 years our team of local professionals have been designing, building, and managing our 11,000+ mile owned and operated fiber network. We are committed to providing fiber-driven solutions for even the highest-bandwidth consuming organizations, and to employing and empowering highly qualified people to serve you better than any other provider. Fiber driven. People powered. Our slogan reinforces our customer commitment. Conterra delivers the network, but it is our people—and how much we care before, during, and after the build—that truly sets us apart. As we continue to expand our business, we are looking for talented people we a creative mindset, a knack for problem-solving, a collaborative work ethic, and a passion for customer service to join our team. And that’s where you come in. This position is based at EL Paso, TX area office The position is a unique opportunity to • Join a company that designs, builds, and operates new-technology-based telecom networks in the education, healthcare, enterprise, and carrier industries throughout the U.S., • Work in a challenging, environment that maintains the highest levels of integrity and reliability. What you will be doing • This role will perform tasks involving aerial and ground telecommunications work at construction/service sites and may operate aerial truck and associated equipment with handling telecom line components., • Lead and motivate crew to meet OSHA safety requirements, project specifications and daily production goals., • Safely operator boom truck, climb poles as needed and utilize standard tools of the trade., • Ability and willingness to follow direction from Supervision., • Willingness to work both individually and in a team environment., • Communicate professionally with co-workers, homeowners, and customers., • Troubleshoot, maintain, and repair overhead fiber lines., • Read and interpret engineering plans and specifications., • Understand separation and clearance regulations., • Install poles and place wires and cables., • Keep detailed record of work activity., • Basic tools required: Climbing tools (belt & gaffs), basic hand tools, etc., • Ability to utilize bucket trucks, crawl spaces, ladders, ceilings, tunnels, and trenches to access various installation and construction points as required., • Ability to work aloft, either from a ladder, aerial lift device or by gaffing., • Ability to climb numerous telephone poles daily, approx. 20’ in height., • Ability to lift and/or pull 100lbs several times per day., • Ability to endure long periods of standing, sitting, or walking., • Ability to bend, twist, squat and reach above the head several times per day., • Continuous use of both hands to operate hand tools and perform other duties., • Ability to work full-time, in an outdoor environment and in all weather conditions. What you will need • Technicians must have good attention to detail and reading comprehension skills, • Technicians must be able to follow geographical & driving directions and be able to apply those written directions to mapped locations and addresses, • GIS programming and background is a plus, • Customer Service skills and professional manner required, when dealing with contractors, • Memorize, focus, and pay attention to detail, • Multitask while maintaining integrity and service quality, • Effectively observe, listen, and understand, • Learn company specific software applications, • Strong problem solving/troubleshooting skills, • Strong map skills, • Must be able to efficiently use Outlook and manage emails, • Must be self-motivated, ale to work under pressure with little supervision, • Must be able to prioritize work schedule and workload efficiently, • High Scholl diploma or G.E.D; BS/BA degree at plus What we offer • Core values that embody teamwork, integrity, and excellence, • A super talented team who values hard work, success, and fun :), • Work/ Life Balance, • Premium health benefits (medical, dental, vision, flex spending, etc.), • Flexible and generous PTO schedule + paid holiday schedule, • 401K program Diversity & Inclusion Conterra celebrates and supports diversity for the benefit of our employees, our business, and our community. We are proud to be an equal opportunity employer and a workplace which leverages and thrives on the diversity and inclusion of everyone on our team to drive excellence throughout our organization.

Job Description Job Title: Temp Operations Support Senior Location: El Paso, TX Type: Contract Compensation: $19.00 - $22.50 Work Model: Onsite – onsite Hours: 40.0 Security Clearance: Not specified in the provided information Overview Leave placeholder text here for recruiter to input Responsibilities • Coordinate construction project closeout documentation., • Review, process, and reconcile contractor invoices., • Verify project records, compliance documentation, as-builts, leakage and repair logs, service line documentation, pipeline data, and invoice supporting documentation., • Compile, analyze, reconcile, and complete all tasks associated with closing a construction project and processing contractor invoices, including job orders and completion reports, designed versus constructed projects, and more., • Utilize business systems such as Maximo, Oracle, SharePoint, Excel, and others to enter or verify data, prepare reports, and maintain project records., • Prepare completion reports, invoice documentation, FERC account coding, debit memos, journal entries, and job-to-job material transfers., • Communicate effectively with Field Operations, Engineering, GIS, and Property Accounting on documentation quality and project status., • Assist with financial forecasting processes by analyzing project statuses and invoice timings. Requirements • Associate degree in Business, a related field, or equivalent work experience., • Experience supporting construction, utility, engineering, or capital projects., • Background in contractor invoice processing or project documentation., • Proficiency with Microsoft Excel and applicable software such as Oracle, Maximo, SharePoint, PowerPlant, TEAMS, etc., • Strong organizational, analytical, and communication skills., • Ability to interpret technical documents, reports, maps, and project records., • Demonstrated ability to read and write fluently in English. System One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M- #LI- Ref: #208-Rowland Tulsa

Job Description OSP Designer I About Conterra Conterra Networks creates custom technology-based network solutions for businesses of all sizes nationwide. For over 25 years our team of local professionals have been designing, building, and managing our 11,000+ mile owned and operated fiber network. We are committed to providing fiber-driven solutions for even the highest-bandwidth consuming organizations, and to employing and empowering highly qualified people to serve you better than any other provider. Fiber driven. People powered. Our slogan reinforces our customer commitment. Conterra delivers the network, but it is our people—and how much we care before, during, and after the build—that truly sets us apart. As we continue to expand our business, we are looking for talented people we a creative mindset, a knack for problem-solving, a collaborative work ethic, and a passion for customer service to join our team. And that’s where you come in. What you will be doing • Evaluate Field Survey Data:, • Compile the site provided information for OSP network design, including topography, utility locations, and potential obstacles., • Document field conditions and perform site evaluations to support accurate design and construction planning., • Use GPS and mapping tools to record data and create accurate network layouts., • Design:, • Assist in developing designs for OSP infrastructure, including aerial and underground fiber optic networks., • Prepare splice MOPs and ensure accurate data is recorded in IQGeo, • Create construction drawings, splice MOPS and route maps using design software such as CAD and GIS tools., • Prepare bill of materials and construction documents under the supervision of senior Designers., • Regulatory Compliance & Permitting:, • Assist in preparing CAD drawings for OSP construction permits to local authorities., • Ensure that all designs adhere to local, state, and federal regulations, as well as industry standards (e.g., NESC, NEC)., • Stay informed of regulatory changes that could impact network designs or project planning., • Project Coordination:, • Assist in resolving engineering or design-related problems that arise during project execution., • Documentation, • Ensure all documentation is loaded into the project. Job Environment The OSP Designer is responsible for supporting the design, planning, and implementation of outside plant (OSP) telecommunications networks. This entry-level engineering position involves collaborating field surveys, drafting design plans, and assisting with the coordination of construction activities. The OSP Designer I ensures all projects meet company standards, while gaining hands-on experience in network infrastructure design and project execution. Expect to work in a dynamic environment where priorities and duties may shift quickly. The ideal candidate for this position is expected to show eagerness to learn and grow to enhance skills and career goals. ** Job duties and responsibilities may be shifted as needed by Management to meet the needs of the business What you will need • Basic understanding of outside plant fiber., • Proficiency in using CAD, GIS, or other design and mapping tools., • Ability to read and interpret engineering drawings, construction plans, and maps., • Strong problem-solving skills with attention to detail., • Good communication skills and ability to work as part of a team., • 0-2 years of experience in telecommunications, construction, or engineering support preferred. Education: Bachelor’s degree in telecommunications, electrical engineering, or a related field is preferred. Associate’s degree with relevant experience may be considered. What we offer • Premium health benefits (medical, dental, vision, flex spending, etc.), • Vacation and Wellness/sick benefits + paid holiday schedule, • 401K program Diversity & Inclusion Conterra celebrates and supports diversity for the benefit of our employees, our business, and our community. We are proud to be an equal opportunity employer and a workplace which leverages and thrives on the diversity and inclusion of everyone on our team to drive excellence throughout our organization.

Job Description Who We Are: Headquartered in Washington, DC, Versar Global Solutions provides full mission lifecycle solutions for challenges faced by our government and commercial Customers in the natural, built, and digital environments. With team members around the world and a rich legacy spanning more than 50 years, Versar Global Solutions delivers a broad array of planning, analysis and risk management solutions, project and program management, operations and maintenance services, and information technology applications for environmental management and remediation projects, mission critical facilities and installations, and in support of readiness and contingency operations. Who You Are: The Versar Environmental Services Group is seeking a Principal Investigator/Project Archaeologist to join and strengthen its Cultural Resources Management (CRM) team in El Paso, Texas. Versar is seeking a highly motivated professional capable of supporting a diverse client base that includes federal, state, municipal, and commercial organizations throughout the Southwest. The successful candidate will possess demonstrated experience in archaeological research, technical writing, and project management, with the ability to direct field investigations and prepare high-quality technical reports. Responsibilities include managing cultural resources projects from proposal development through completion, supervising archaeological field crews, coordinating with clients and regulatory agencies, and ensuring compliance with applicable federal and state cultural resource regulations. Previous archaeological experience in the American Southwest is preferred but not required. The candidate must be capable of serving as a Principal Investigator, supervising field investigations, and overseeing all phases of project implementation. Demonstrated proficiency with GIS software, GPS data collection, and digital field documentation is required. Experience conducting cultural resources investigations under Section 106, as well as familiarity with state and federal permitting and compliance processes, is essential. Strong interpersonal, organizational, and technical writing skills are also required. What You’ll Do: • Manage cultural resources projects from planning through completion, including scope, schedule, budget, and quality standards., • Logistically plan, coordinate, and implement archaeological field projects., • Direct field crews and provide guidance on appropriate archaeological methods and documentation standards., • Conduct archaeological research, analysis, and field investigations, including Phase I inventory, Phase II evaluation, and Phase III data recovery efforts., • Assist, when needed, with manual excavation of shovel tests and test units., • Organize and maintain project data, complete archaeological site forms, and support accurate digital field documentation., • Prepare high-quality technical reports documenting methodology, findings, recommendations, and compliance considerations., • Collaborate with technical field staff, office staff, managers, and administrative teams to ensure project deliverables meet client and regulatory expectations. What You’ll Bring: • M.A. degree in Anthropology with 3–4 years of related professional experience., • Demonstrated experience directing field crews, producing quality technical reports, and applying cultural resources compliance regulations., • Knowledge of archaeological inventory, testing, excavation techniques, and cultural resources investigations under Section 106., • Proficiency with GIS software, GPS data collection, and digital field documentation., • Excellent writing, communication, interpersonal, organizational, and technical writing skills., • Ability to exercise professional judgment and discretion while managing complex tasks under pressure and stringent time constraints., • Ability to adapt to ambiguity and changing conditions, including weather, client demands, project priorities, and schedules., • Must be willing to travel and be physically capable of conducting field work., • Must possess and maintain an active and valid driver's license without restrictions., • Must be proficient in English, both written and verbal, to ensure effective communication and collaboration., • Successful completion of preemployment screenings, including federal background check, MVR, and drug screen., • Compliance with the company drug and alcohol policy., • Authorization to work in the U.S. by the successful candidate’s start date. Compensation Expected Salary: $65,000 - $80,000 per year Versar Global Solutions provides the compensation range and general description of other compensation and benefits that the Company in good faith believes it might pay and/or offer for this position based on the successful applicant’s education, experience, knowledge, skills, and abilities in addition to internal equity and geographic location. The Company reserves the right to ultimately pay more or less than the posted range and offer additional benefits and other compensation, depending on circumstances not related to an applicant’s status protected by local, state, or federal law. Location Requirements The position will primarily work onsite in El Paso, TX. EEO Commitment Versar Global Solutions is committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, genetic information, sexual orientation, gender identity, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state, and local laws. Versar Global Solutions complies with applicable state and local laws governing non-discrimination in employment in every location in which the company operates. This policy applies to all terms and conditions of employment, including hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Versar Global Solutions expressly prohibits any form of unlawful employee harassment based on race, color, religion, sex, national origin, age, disability, genetic information, sexual orientation, gender identity, marital status, amnesty, or status as a covered veteran. Improper interference with the ability of Versar Global Solutions employees to perform their job duties is not tolerated. #LI-FH1

Mid-Level Substation Engineer (Remote) About the Opportunity We are seeking a Mid-Level Substation Engineer to join a growing Power Delivery team supporting utility, renewable energy, and industrial clients across North America. This is an excellent opportunity for an engineer who enjoys both technical design work and project collaboration while working in a flexible remote environment. The ideal candidate will have hands-on experience with substation physical design and a strong understanding of utility standards, power delivery infrastructure, and multidisciplinary project execution. Responsibilities • Develop and review substation physical design packages for projects ranging from 12kV to 500kV+., • Prepare engineering deliverables including:, • General arrangements, • Elevations and sections, • Equipment layouts, • Grounding plans, • Conduit and cable routing, • Structural loading and foundations coordination, • Coordinate with Protection & Control, Civil/Structural, Transmission, and Project Management teams., • Perform engineering calculations and technical evaluations., • Review client specifications, utility standards, and project requirements., • Support project execution from conceptual design through construction., • Participate in client meetings, design reviews, and technical discussions., • Provide mentorship and guidance to junior engineers and designers. Qualifications • Bachelor's degree in Electrical Engineering from an accredited institution., • 4-8 years of substation engineering experience., • Experience supporting utility, consulting, EPC, or power delivery projects., • Strong knowledge of:, • AIS and/or GIS substations, • High-voltage equipment, • Grounding systems, • Physical layout design, • Industry codes and standards, • Proficiency with engineering and design software such as:, • AutoCAD, • MicroStation, • Bentley Substation, • Bluebeam, • Microsoft Office Suite, • Strong communication and coordination skills., • Ability to work independently in a remote environment. Preferred Qualifications • Professional Engineer (PE) License or ability to obtain one., • Experience with EHV projects (138kV-500kV+)., • Utility client experience., • Exposure to renewable interconnection, transmission, or EPC projects., • Previous experience leading small project teams or workstreams. What You'll Receive • Fully remote work environment., • Competitive base salary and annual bonus opportunity., • Comprehensive medical, dental, and vision coverage., • 401(k) with company contribution., • Career growth opportunities within a rapidly expanding power delivery practice., • Exposure to high-profile utility and energy infrastructure projects across North America.

Machine Control Field Technician – Autonomous Heavy Equipment Location and Territory - Remote - US Travel across the U.S. - Travel, around 75 - 90% Start Date - Immediate About the Company We’re working with a fast-growing construction technology business that is bringing automation, GPS machine control, and robotic retrofit technology into the heavy equipment world. Their systems are installed onto machines like excavators, pile drivers, and other construction equipment, helping contractors improve accuracy, productivity, and how work gets done on site. The business is growing quickly and needs more field-based technical people to support live projects across the U.S. Role Overview You’ll be out on customer job sites installing technology onto construction equipment, training operators on how to use it, and then staying close to the machine once it goes live to make sure everything is working properly. The role is built around three main areas: Install. Train. Support. This is not a desk-based GIS or survey role. It is field-based, hands-on, travel-heavy, and right at the point where GPS, machine control, construction equipment, and automation all come together. Where you will make a difference • Travel to customer job sites across the U.S., • Support installation of the company's machine control and automation technology onto heavy equipment, • Set up, calibrate, and support GPS machine control systems, • Carry out site localisations, calibrations, diagnostics, and base/rover setup where needed, • Work alongside mechanical field teams during installs and troubleshooting, • Train operators and site teams on how to use the technology properly, • Stay on-site after installation to monitor performance and answer customer questions, • Troubleshoot GPS, hardware, software, communication, and sensor-related issues in the field, • Work with operators, project managers, superintendents, site surveyors, and engineers, • Keep clear records of installs, support visits, troubleshooting, customer interactions, and training, • Help keep the technology running when customers are depending on it live on site Who you are • Experience in machine control, GPS, surveying, construction technology, or field-based technical support, • Comfortable working outdoors and around heavy equipment, • Mechanically practical - you know how to use tools and figure things out in the field, • Able to communicate well with customers, especially when something is not working and pressure is high, • Calm enough to troubleshoot problems without bluffing or overpromising, • Happy with a role that involves serious travel across the U.S., • Comfortable being on site for long stretches when required, • Able to work independently, but also alongside mechanical, engineering, service, and customer teams, • Willing to learn new technology, • Legally authorised to work in the U.S., • Able to pass required background checks Nice to have • Experience with Trimble, Leica, Topcon, or similar GPS / machine control systems, • Experience installing or calibrating GPS machine control systems on heavy equipment, • Survey, site layout, or construction staking experience, • Familiarity with site localisations and local coordinate systems, • Agriculture GPS / precision ag technology experience, • Background with heavy equipment dealers, machine control dealers, or survey equipment providers, • Military, aviation, HVAC, welding, or other mechanically technical field backgrounds may also fit well Compensation & Setup • Typical target range: $90,000 – $125,000 base salary, • Full company benefits - Fully funded Medical, Dental & Vision, • Front Loaded 10 Days PTO, 13 Paid Holidays, • Travel across the U.S., • Field-based setup with customer site work, remote support, and technical troubleshooting Why It’s Worth a Look • This is a good fit if you like being out in the field, solving problems in real time, and working with technology that is changing how construction equipment is used., • It is not a soft travel role. The travel is heavy, the pace is fast, and customers will expect answers when systems are live on site., • If you are practical, technically curious, strong with customers, and interested in machine control, GPS, automation, and heavy equipment, this is a chance to join a business that is still being built - not just step into a fixed corporate structure., • You’ll get exposure to modern construction automation, work directly with the people building the product, and be part of a team that is genuinely shaping how this technology is rolled out in the field.

Location Fully Remote Compensation $90,000 – $110,000 base salary + equity package About Safe Pro AI Landmines and explosive remnants of war contaminate 60 countries, killing civilians and inhibiting societal development. Ukraine is among the most affected, with an estimated 30% of its land unsafe to use. Safe Pro AI builds advanced aerial mapping and AI systems for humanitarian demining and defense, transforming drone and robotic sensor imagery into actionable 2D and 3D intelligence that saves lives. Our core mission is to protect civilians, deminers, and soldiers by detecting landmines and other explosive threats. Our flagship platform, SpotlightAI, is used by humanitarian demining organizations and military units globally. To date, our systems have detected over 50,000 explosive threats with more detected every day. The founders of Safe Pro AI have worked on cutting-edge landmine detection research since 2019 through their non-profit, the Demining Research Community. Safe Pro AI was founded in early 2023 to operationalize that research at scale, particularly in Ukraine. We are a small, highly technical, mission-driven team spanning remote sensing, computer vision, robotics, and machine learning. Position Overview Safe Pro AI is looking for a high-agency and meticulous QA Engineer to serve as the quality safeguard for our software products spanning cloud, desktop and embedded platforms. You will be the primary QA owner in a fast-moving, high-impact environment, ensuring stable and robust product deliveries while rapidly improving our testing standards through automation and targeted testing of common edge-cases. You will design and run automation suites, conduct manual tests, and work closely with our core engineering team to perform root-cause-analysis on defects across all of our products. You will also work directly with customers to quickly resolve technical issues in production, identify workarounds, and document defects for engineering to prevent recurrence. This role is ideal for a hands-on generalist who thrives with minimal direction, embraces extreme ownership, and wants their day-to-day work to directly protect lives. Key Responsibilities • Rapidly Improve QA Systems and Processes: Establish and formalize QA methodologies, test frameworks, release acceptance criteria, and regression test suites across our diverse product suite., • End-to-End & Automated Testing: Build and maintain reliable automated test suites using modern frameworks (Selenium or Playwright), pairing automated coverage with meticulous exploratory testing across edge cases., • Voice of Quality & User Feedback: Synthesize recurring customer friction points and QA metrics to help prioritize engineering roadmap items and UX improvements., • Hands-on testing of new features and product releases, systematically exploring use cases, documenting and investigating bugs, and serving as a critical release gate by rapidly prioritizing issues and confidently assessing feature readiness., • Technical Customer Support & Issue Triage: Help serve as the technical escalation point for customer-facing issues. Dig into logs, recreate user workflows, isolate root causes, and translate user reports into actionable bug reports for engineering. What We Look For • High Agency & Autonomy: You are comfortable being the primary QA resource. You do not wait for a checklist: you assess risks, build processes, prioritize test plans, and solve ambiguity independently., • Modern Test Automation: Practical experience building and maintaining functional test suites for modern web applications using Playwright or Selenium., • Agile Tooling Fluency: Hands-on experience managing sprint workflows, test cases, and bug tracking in Azure DevOps or Jira, • Work Authorization: Must be legally authorized to work in the United States without current or future sponsorship requirement Preferred Qualifications • Experience with drone-based mapping, GIS, or aerial survey workflows is a major bonus (but not required!), • Exposure to computer vision pipelines, photogrammetry, or 3D terrain reconstruction systems., • Experience working on products in the defense sector Compensation & Benefits • Base Salary: $90,000 – $110,000, commensurate with experience., • Equity: Generous stock options and ownership opportunities in a mission-driven company, backed by a publicly traded parent organization ($SPAI)., • Work Environment: 100% remote flexibility with modern tooling and high autonomy. What We Offer • High-Impact Mission: The chance to work on technology that directly saves lives, protects soldiers and civilians, and aids in the recovery of conflict zones like Ukraine., • Zero-to-One Impact: As our first dedicated QA professional, you have total latitude to define quality culture and testing architecture across the company., • Collaborative Culture: Work side-by-side with world-class experts in machine learning, computer vision, and geospatial engineering.

Company Overview Check out this video and find out why our team loves to work here! (https://www.cdmsmith.com/resources/videos/meet-cdm-smith) Join Us! CDM Smith - where amazing career journeys unfold. Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it's a priority that the company takes good care of you and your family. Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world. Job Description CDM Smith's Water Services Group is seeking an experienced Building Information Modeler to support site development and water infrastructure projects in Albuquerque, NM; Phoenix, AZ; or El Paso, TX. This role is intended for an appropriately experienced modeling professional who can independently develop, manage, and deliver Civil 3D models and construction plan sets across multiple disciplines with minimal guidance. This position supports both public- and private-sector projects and requires a candidate who is detail-oriented, self-directed, and comfortable working in a fast-paced, delivery-driven environment where modeling resources are often constrained and initiative is expected. Roles and responsibilities may include, but are not limited to the following regarding water infrastructure projects: • Develop and manage Civil 3D models from conceptual and preliminary layouts through fully developed IFC-level models, often using best available or incomplete data., • Independently establish and refine: horizontal alignments and vertical profiles; sample lines, section views, and cross-section production; complex surfaces using corridors, feature lines, grading objects, and breaklines., • Perform pressure and gravity pipe modeling for water, wastewater, and storm systems., • Generate automated plan, profile, and cross-section sheets in accordance with firm and client standards., • Produce coordinated, construction-ready plan sets throughout all phases of project delivery., • Perform earthwork determinations and volume analyses using modeled surfaces., • Develop quantities and calculations derived directly from models, ensuring consistency with project assumptions and design intent., • Maintain robust data management practices, including file structure, surfaces, references, and model integrity across project lifecycles., • Apply firm and client standards, workflows, and QC procedures to all modeling and sheet production., • Coordinate models with engineers, designers, surveyors, and other disciplines to ensure constructability and design intent are preserved., • Provide technical direction and review as required; while this role may guide others at times, it should not assume the routine availability of junior staff support. Skills & Abilities Notable experience and project examples demonstrating intermediate to expert-level proficiency in Autodesk Civil 3D, including: • Alignments, profiles, corridors, grading tools, feature lines, • Surface creation and management, • Gravity and pressure network modeling, • Plan/profile/cross-section sheet automation, • Direct experience supporting site development projects with an emphasis on water conveyance systems and buried utility infrastructure., • Proven ability to work independently with limited oversight; interpret sketch-level information and design intent; and manage multiple active models and deliverables concurrently., • Experience working on both public and private infrastructure projects within multidisciplinary teams., • Demonstrated self-starter mentality with strong attention to detail., • Ability to function effectively in a high-demand, deadline-driven environment., • Strong communication skills and the ability to collaborate across disciplines., • Commitment to quality, consistency, and defensible technical work products. Qualifications High School diploma or equivalent with vocational technical training in basic CADD drafting technology and intelligent modeling. 9 years of related experience. Domestic and/or international travel may be required. The frequency of travel is contingent on specific duties, responsibilities, and the essential functions of the position, which may vary depending on workload and project demands. Equivalent additional directly related experience will be considered in lieu of a degree. Preferred Qualifications • Experience developing federated models and surfaces with machine-grade or construction-tolerance considerations., • Survey or geomatics knowledge, including surface control and data validation., • Working familiarity with GIS concepts and tools and data interoperability., • Experience with data translation and coordination between commonly used industry platforms (e.g., ESRI products, MicroStation)., • Understanding of construction phasing, model-based quantities, and contractor use of models. Amount of Travel Required 10% or less EEO Statement We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith Inc. and its divisions and subsidiaries are an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, physical or mental disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law. Background Check and Drug Testing Information CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing. Massachusetts Applicants It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Additional Pay Range Information CDM Smith is committed to fair and equitable compensation practices. This pay range is a good faith estimate representative of all experience levels for the geographic location assigned to the position. In addition to geographic location, a candidate's salary is determined by several other factors including, but not limited to, the role, function and associated responsibilities, relevant work experience, skills, required certifications, and education/training. Additional Compensation All bonuses at CDM Smith are discretionary and may or may not apply to this position. Visa Sponsorship Available No-We will not support sponsorship in the United States, i.e. H-1B or TN Visas for this position Agency Disclaimer All vendors must have a signed CDM Smith Placement Agreement from the CDM Smith Talent Acquisition Manager to receive payment for your placement. Verbal or written commitments from any other member of the CDM Smith Inc. and its divisions and subsidiaries staff will not be considered binding terms. All unsolicited resumes sent to CDM Smith Inc. and its divisions and subsidiaries and any resume submitted to any employee outside of CDM Smith Talent Acquisition Team will be considered property of CDM Smith. CDM Smith Inc. and its divisions and subsidiaries will not be held liable to pay a placement fee. Pay Range Max USD $65.84 Pay Range Min USD $39.90

About the opportunity X4 Engineering is partnering with a growing engineering consultancy headquartered in Raleigh, North Carolina. They’re expanding their Energy business and are looking for a Senior/Lead Electrical Substation Engineer to take technical ownership of their substation design work. This is a lead role with real influence. You’ll shape how projects are delivered, guide other engineers, and work across a varied mix of transmission, distribution and renewables projects. You’ll have the flexibility to work fully remote, hybrid or from the Raleigh office. What you’ll be doing • Lead the electrical design for HV (4kV–230kV) and EHV (above 230kV) substations and switching stations, including AIS, GIS and FACTS., • Work across sectors: transmission and generator interconnection, power distribution (EV charging and microgrids), and renewables (solar PV, BESS and wind)., • Own the full design package:Drawings: one-line and three-line diagrams, protective relay and metering diagrams, AC/DC schematics, general arrangements, and grounding and raceway plans, • Specifications for major primary equipment, • Bills of materials, cable schedules and equipment lists, • Carry out the calculations and studies:Calculations: grounding, cable and conduit sizing, transformer and battery sizing, lightning protection and bus bracing, • Power system studies: load flow, short circuit, protective coordination and arc flash, • Lead projects through construction, start-up and commissioning., • Review the work of peers and consultants, and drive quality and continuous improvement., • Help identify key client needs and grow client relationships. What you’ll bring • A Professional Engineer (PE) license (required), • A BS in Electrical Engineering from an ABET-accredited university, • 7+ years of substation electrical design experience on US high-voltage projects, • Experience across transmission, distribution and/or renewables, • Working knowledge of NEC, NESC, NEMA, IEEE and ANSI standards, • Strong written and verbal communication skills What’s on offer • Fully remote, hybrid or office-based working, • Relocation assistance to Raleigh, NC, • Top-tier medical, dental and vision plans, • 401(k) matching, • Tuition reimbursement, • Life and disability insurance, • Generous paid time off Interested? Apply now or message Hugo Massa at X4 Engineering for a confidential conversation.

Sr Sales Executive – Utilities (Hunter) Techwave is an international Technology and Engineering Services firm headquartered in Houston, Texas. Our Engineering business unit has seen explosive growth and we’re looking for a new Sales Executive to capitalize on our success and grow the business practice in North America. As a Techwave Sales Executive, you will use your business development expertise to prospect and grow Techwave’s Engineering customer base by selling industry leading solutions and services to Utility providers throughout North America. This is a quota carrying, individual contributor role with a career path to building and managing Utility Sales for the North America team. Responsibilities: • Prospect and generate new business in the Utilities domain, • Develop and present services and solutions for sales proposals to potential clients, • Develop successful go-to-market strategies, working closely with competency and delivery teams, • Actively participate in customer marketing events and industry trade shows (drive attendance, attend events, follow-up with lead lists), • Develop strong relationships in the industry through thought leadership, • Ensure sales opportunities are accurately qualified and mapped to the customer budget cycle and aligned with Techwave’s Delivery and Competency teams, • Forecast and report sales/revenue projections to Sales Management and deliver a predictable pipeline to drive forecast accuracy Requirements: Proven record of establishing new markets and developing strategic relationships. Experience selling Utilities Engineering services including but not limited to: • Field Service Inventory: pole surveying, data collection and field auditing., • Engineering and Design: Transmission and Distribution engineering planning, design, and operating activities including projects that involve preparation of power system analysis, load flow, and related studies, etc., • Geospatial Services: Data maintenance of GIS data systems including business as usual work order postings, data analytics, field tool optimization support, etc. (Esri, Smallworld, IQGeo), • Grid Modernization: Electric utility grid modernization initiatives involving Distribution Automation (DA), Volt-VAR Optimization (VVO), Advanced Distribution Management Systems (ADMS) and Supervisory Control and Data Acquisition (SCADA), Distribution Energy Resources (DER), Battery Energy Storage Systems (BESS), or related technologies. Sales Executive: The Sales Director position is a key member of the management team responsible for selling high quality Engineering services and solutions. The Sales Executive will be part of an established team that provides consulting services to both public-owned and investor-owned utilities. These consulting services provide clients with various distribution and transmission planning tasks and projects nationwide. The Sales Director will work on a variety of new business and existing business projects for various clients. This position is responsible for account managing, leading, and executing a range of projects in relation to data management, planning, and design activities within the gas and electric utility sector. The position will require a mixture of new sales, client management and technical capabilities. These tasks will include, but are not limited to, an understanding of work being performed, hunting for new opportunities and new clients, as well as regular communication with existing clients regarding project performance, new opportunities and support of our project management teams around technical and commercial progress. Sales Executive Qualifications: • Familiarity with electric power industry and knowledge of business issues associated with gas and electric Utilities, • General knowledge of distribution and transmission operating systems and business units, • Some knowledge of relevant FERC, PUC, and NERC compliance standards to support industry trends, • Ability to review client RFP documents and develop cost estimates and detailed scope of work documents, • Ability to take direction from and discuss decisions with supervisor, and to coordinate with peers on projects, • Strong writing and presentation skills, • Strong problem-solving skills and attention to detail, • Excellent communication and interpersonal skills, • Proficiency in project management software and Microsoft Office Suite, • Periodic travel will be required Techwave Inc. is a trusted and future-focused solutions provider and technology firm. Utilities consistently come to Techwave for reliable power expertise, as reflected through our working with investor-owned utilities and municipals/cooperatives across the Globe as well as a growing number of local utility providers and private developers. Our project portfolio includes large energy projects for electric utilities, power generation owners, and industrial clients. In addition, Techwave works with an established group of industry-leading construction partners delivering meaningful energy delivery solutions.

Energy Erectors, Inc. (EEI) tackles terrain, technology, and timelines to construct transmission line projects up to 500 kV and has over 30 years of experience building substations and switchyards. With integrated in-house construction, engineering, procurement, and commissioning capabilities, Energy Erectors has the experience and resources to deliver world-class solutions to complex power transmission and distribution projects. Areas of expertise include GIS and VAR compensators. EEI's mission is to safely deliver the highest quality work, exceed client expectations, and relentlessly maintain a reputation for integrity. Energy Erectors is a purpose-driven company. Our core values guide our strategy, performance, and culture. We believe in maintaining an environment where team members can make an impact, grow, and thrive. A place where they find meaning and purpose in doing the important work of ensuring communities have the vital energy, light, and communications to prosper. Our culture is inclusive and welcoming. Our teams are empowered with abundant training, tools, and opportunities to follow their curiosity and ambitions. Everyone has an equal chance to advance. Everyone is supported, respected, and challenged to be their best. We're always looking for talented and dedicated people to join us and love where they work. Energy Erectors is a proud subsidiary of MasTec (NYSE: MTZ), a Fortune 500 Company ranked by Energy News-Record as one of the leading contractors in the country. EEI is part of the MasTec Power Delivery segment. We are certified as a minority-controlled company by the National Minority Suppliers Development Council (NMSDC). Our rich diversity of people and ideas makes us a stronger, more innovative organization. The Substation Equipment Operator works on various equipment related projects building high voltage power lines and substations. This role supports the construction of new substations as well as modifications and upgrades of existing substations. This is a traveling role that requires working in different job sites all over the state of New Mexico. Per diem is provided when applicable. Responsibilities: • Work safely while assisting in new/existing construction and various tasks such as demolition, site preparation, excavating, backfilling and landscaping, trenching, pole setting, cable labeling, and other substation related tasks such as construction clean-up., • Assist with installing transformer and transformer banks, bus structures and switchgear, lines (underground/overhead), ground grid, control buildings, and other related substation material tasks., • Will work with man baskets, skid steers, shovels, compactors, back hoes and other industry equipment., • Frequently work around energized high voltage systems requiring skill and care., • Maintain company tools in good working order., • Understands and complies with the Company's Code of Business Conduct and Ethics., • Other duties as assigned by Management. Qualifications: • Obtain and maintain a valid State Class C driver's license., • Ability to lift up to 50 pounds on a regular basis., • Ability to carry up to 50 pounds., • Ability to work on ladders and hydraulic lifts., • Ability to learn how to operate construction equipment and use hand tools., • Ability to work within a physically demanding work environment., • Physical activity including extended periods of standing and walking, frequent sitting, kneeling, bending, crouching, reaching, stopping and climbing., • Work is primarily performed both indoor and outdoor environments in all/extreme weather conditions. Physical Demands and Work Environment: This job operates in a field environment. This role routinely requires extended periods of bending, squatting, climbing, kneeling, pushing, pulling, lifting, lifting in awkward positions, standing, and twisting. Also, working in inclement weather conditions, such as extreme heat, extreme cold, rain, ice, snow, and wind. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. This position is physically active, with lifting required. Must be able to bend and lift and carry up to 50 pounds. Clarity of vision at 20 feet or more or 20 inches or less, with the ability to judge distance and space relationships. Precise hand-eye coordination. Ability to identify and distinguish colors. Equal Employment Opportunity: The Company's policy is not to unlawfully discriminate against any applicant or employee based on race, color, national origin, ethnicity, sex, gender, sexual orientation, religion, marital status, age, disability, genetic information, or any other basis protected by applicable law and EEOC regulations. The Company also prohibits harassment of applicants or employees based on any of these protected categories.

Energy Erectors, Inc. (EEI - A MasTec Company) tackles terrain, technology, and timelines to construct transmission line projects up to 500 kV and has over 30 years of experience building substations and switchyards. With integrated in-house construction, engineering, procurement, and commissioning capabilities, Energy Erectors has the experience and resources to deliver world-class solutions to complex power transmission and distribution projects. Areas of expertise include GIS and VAR compensators. EEI's mission is to safely deliver the highest quality work, exceed client expectations, and relentlessly maintain a reputation for integrity. Energy Erectors is a purpose-driven company. Our core values guide our strategy, performance, and culture. We believe in maintaining an environment where team members can make an impact, grow, and thrive. A place where they find meaning and purpose in doing the important work of ensuring communities have the vital energy, light, and communications to prosper. Our culture is inclusive and welcoming. Our teams are empowered with abundant training, tools, and opportunities to follow their curiosity and ambitions. Everyone has an equal chance to advance. Everyone is supported, respected, and challenged to be their best. The Substation Journeyman performs highly skilled, journeyman-level electrical work in the operation, construction, maintenance, and repair of high voltage electric substations, and other related electrical and mechanical equipment associated with high voltage electric substations. This role supports the construction of new substations as well as modifications and upgrades of existing substations for electrical utility companies. Core Responsibilities: • Works safely while performing new construction, maintenance or repair, testing, adjusting and troubleshooting work of substation equipment/systems which includes, but is not limited to, work involving the following:, • Ground grids and steel erection, • Buswork (High and Low Voltage), • Airbreak / Hookstick Switches, • Control Cable Terminations (High / Low Voltage), • Control Buildings, • Conduit and duck banks, • Capacitor bank installations 23kv- 230 kv, • Transformers, regulators and circuit breakers, • Circuit Switchers, motor-operated and manual switches, • During installation and or maintenance, trouble shoot and correct malfunctions of all substation equipment., • Safe operation of all company and related construction equipment used for substation, transmission, and distribution line construction., • Follow company and industry safety protocols within the construction of substations., • Any other tasks as directed., • Responsible for maintaining Company vehicles, test equipment and tools in good working conditions Frequently works with energized high voltage systems requiring skill and care to protect the lives of themselves and others. Understands and complies with the Company's Code of Business Conduct and Ethics. Other duties as assigned by Management. Minimum Qualifications: • Obtain and maintain a valid State Class C driver's license., • Must have previous substation experience, • Must be willing to travel around Central US. Preferred Qualifications: • OSHA 10., • 4+ years of substation experience Physical Demands and Work Environment: • This job operates in a field environment., • This role routinely requires extended periods of bending, squatting, climbing, kneeling, pushing, pulling, lifting, lifting in awkward positions, standing, and twisting., • Also, working in inclement weather conditions, such as extreme heat, extreme cold, rain, ice, snow, and wind., • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job., • This position is physically active, with lifting required. Must be able to bend and lift and carry up to 50 pounds., • Clarity of vision at 20 feet or more or 20 inches or less, with the ability to judge distance and space relationships., • Precise hand-eye coordination., • Ability to identify and distinguish colors. Benefits available include Medical, Dental, Vision, Disability and Life insurance, a 401k plan and Employee Stock Purchase plan. MasTec is a publicly traded company MTZ (NYSE). Equal Employment Opportunity: The Company's policy is not to unlawfully discriminate against any applicant or employee based on race, color, national origin, ethnicity, sex, gender, sexual orientation, religion, marital status, age, disability, genetic information, or any other basis protected by applicable law and EEOC regulations. The Company also prohibits harassment of applicants or employees based on any of these protected categories.

Energy Erectors, Inc. (EEI) tackles terrain, technology, and timelines to construct transmission line projects up to 500 kV and has over 30 years of experience building substations and switchyards. With integrated in-house construction, engineering, procurement, and commissioning capabilities, Energy Erectors has the experience and resources to deliver world-class solutions to complex power transmission and distribution projects. Areas of expertise include GIS and VAR compensators. EEI's mission is to safely deliver the highest quality work, exceed client expectations, and relentlessly maintain a reputation for integrity. Energy Erectors is a purpose-driven company. Our core values guide our strategy, performance, and culture. We believe in maintaining an environment where team members can make an impact, grow, and thrive. A place where they find meaning and purpose in doing the important work of ensuring communities have the vital energy, light, and communications to prosper. Our culture is inclusive and welcoming. Our teams are empowered with abundant training, tools, and opportunities to follow their curiosity and ambitions. Everyone has an equal chance to advance. Everyone is supported, respected, and challenged to be their best. We're always looking for talented and dedicated people to join us and love where they work. Energy Erectors is a proud subsidiary of MasTec (NYSE: MTZ), a Fortune 500 Company ranked by Energy News-Record as one of the leading contractors in the country. EEI is part of the MasTec Power Delivery segment. We are certified as a minority-controlled company by the National Minority Suppliers Development Council (NMSDC). Our rich diversity of people and ideas makes us a stronger, more innovative organization. The Substation Foreman supervises and assists with the day-to-day activities of the substation employees and the project to which they are assigned, reports directly to Project Manager assigned to the project. The Foreman must be able to perform the various duties while on the job from Groundman to Leadman. Create, maintain, and execute the project plan to schedule and ensure compliance with budget. Supervise and coordinate all construction activities. Track and communicate weekly project report and generates 3 weeks look ahead. Ensure project materials and workmanship meets the project quality standards and design requirements. Initiate and conduct project meetings with staff assigned to the project and management if necessary. Review and address plan details, resolve issues before they result in added budget expenditures. Advise Superintendent of any potential problems, work interferences or schedule difficulties while assisting in circumventing/resolving such conflicts. Enforce site specific plans and procedures that are in line with EEI's culture and safety requirements. Review and submit weekly time sheets to payroll for processing. Maintain the project's daily job diary. Minimum Working knowledge of Microsoft Office software, including Excel, Word, Outlook and internal operational systems. Ability to apply basic engineering principles to construction challenges. Ability to visualize the entire project and anticipate constructability issues and embed solutions in the construction plans and schedules. Must be able to schedule, monitor and forecast resources for optimum efficiency. Ability to manage others and many facets of the construction project and assume responsibility. Preferred Obtain and maintain a valid State Class A driver's license and/or hold and maintain a valid commercial driver's License. OSHA 30. This job operates in a field environment. This role routinely requires extended periods of bending, squatting, climbing, kneeling, pushing, pulling, lifting, lifting in awkward positions, standing, and twisting. Also, working in inclement weather conditions, such as extreme heat, extreme cold, rain, ice, snow, and wind. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. This position is physically active, with lifting required. Must be able to bend and lift and carry up to 50 pounds. Clarity of vision at 20 feet or more or 20 inches or less, with the ability to judge distance and space relationships. Precise hand-eye coordination. Ability to identify and distinguish colors. Benefits available include Medical, Dental, Vision, Disability and Life insurance, a 401k plan and Employee Stock Purchase plan. MasTec is a publicly traded company MTZ (NYSE). Equal Employment Opportunity: The Company's policy is not to unlawfully discriminate against any applicant or employee based on race, color, national origin, ethnicity, sex, gender, sexual orientation, religion, marital status, age, disability, genetic information, veteran status or any other basis protected by applicable law and EEOC regulations. The Company also prohibits harassment of applicants or employees based on any of these protected categories.

Energy Erectors, Inc. (EEI) tackles terrain, technology, and timelines to construct transmission line projects up to 500 kV and has over 30 years of experience building substations and switchyards. With integrated in-house construction, engineering, procurement, and commissioning capabilities, Energy Erectors has the experience and resources to deliver world-class solutions to complex power transmission and distribution projects. Areas of expertise include GIS and VAR compensators. EEI's mission is to safely deliver the highest quality work, exceed client expectations, and relentlessly maintain a reputation for integrity. Energy Erectors is a purpose-driven company. Our core values guide our strategy, performance, and culture. We believe in maintaining an environment where team members can make an impact, grow, and thrive. A place where they find meaning and purpose in doing the important work of ensuring communities have the vital energy, light, and communications to prosper. Our culture is inclusive and welcoming. Our teams are empowered with abundant training, tools, and opportunities to follow their curiosity and ambitions. Everyone has an equal chance to advance. Everyone is supported, respected, and challenged to be their best. We're always looking for talented and dedicated people to join us and love where they work. Energy Erectors is a proud subsidiary of MasTec (NYSE: MTZ), a Fortune 500 Company ranked by Energy News-Record as one of the leading contractors in the country. EEI is part of the MasTec Power Delivery segment. We are certified as a minority-controlled company by the National Minority Suppliers Development Council (NMSDC). Our rich diversity of people and ideas makes us a stronger, more innovative organization. The Substation Foreman supervises and assists with the day-to-day activities of the substation employees and the project to which they are assigned, reports directly to Project Manager assigned to the project. The Foreman must be able to perform the various duties while on the job from Groundman to Leadman. Create, maintain, and execute the project plan to schedule and ensure compliance with budget. Supervise and coordinate all construction activities. Track and communicate weekly project report and generates 3 weeks look ahead. Ensure project materials and workmanship meets the project quality standards and design requirements. Initiate and conduct project meetings with staff assigned to the project and management if necessary. Review and address plan details, resolve issues before they result in added budget expenditures. Advise Superintendent of any potential problems, work interferences or schedule difficulties while assisting in circumventing/resolving such conflicts. Enforce site specific plans and procedures that are in line with EEI's culture and safety requirements. Review and submit weekly time sheets to payroll for processing. Maintain the project's daily job diary. Minimum Working knowledge of Microsoft Office software, including Excel, Word, Outlook and internal operational systems. Ability to apply basic engineering principles to construction challenges. Ability to visualize the entire project and anticipate constructability issues and embed solutions in the construction plans and schedules. Must be able to schedule, monitor and forecast resources for optimum efficiency. Ability to manage others and many facets of the construction project and assume responsibility. Preferred Obtain and maintain a valid State Class A driver's license and/or hold and maintain a valid commercial driver's License. OSHA 30. This job operates in a field environment. This role routinely requires extended periods of bending, squatting, climbing, kneeling, pushing, pulling, lifting, lifting in awkward positions, standing, and twisting. Also, working in inclement weather conditions, such as extreme heat, extreme cold, rain, ice, snow, and wind. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. This position is physically active, with lifting required. Must be able to bend and lift and carry up to 50 pounds. Clarity of vision at 20 feet or more or 20 inches or less, with the ability to judge distance and space relationships. Precise hand-eye coordination. Ability to identify and distinguish colors. Benefits available include Medical, Dental, Vision, Disability and Life insurance, a 401k plan and Employee Stock Purchase plan. MasTec is a publicly traded company MTZ (NYSE). Equal Employment Opportunity: The Company's policy is not to unlawfully discriminate against any applicant or employee based on race, color, national origin, ethnicity, sex, gender, sexual orientation, religion, marital status, age, disability, genetic information, veteran status or any other basis protected by applicable law and EEOC regulations. The Company also prohibits harassment of applicants or employees based on any of these protected categories.

Energy Erectors, Inc. (EEI - A MasTec Company) tackles terrain, technology, and timelines to construct transmission line projects up to 500 kV and has over 30 years of experience building substations and switchyards. With integrated in-house construction, engineering, procurement, and commissioning capabilities, Energy Erectors has the experience and resources to deliver world-class solutions to complex power transmission and distribution projects. Areas of expertise include GIS and VAR compensators. EEI's mission is to safely deliver the highest quality work, exceed client expectations, and relentlessly maintain a reputation for integrity. Energy Erectors is a purpose-driven company. Our core values guide our strategy, performance, and culture. We believe in maintaining an environment where team members can make an impact, grow, and thrive. A place where they find meaning and purpose in doing the important work of ensuring communities have the vital energy, light, and communications to prosper. Our culture is inclusive and welcoming. Our teams are empowered with abundant training, tools, and opportunities to follow their curiosity and ambitions. Everyone has an equal chance to advance. Everyone is supported, respected, and challenged to be their best. We're always looking for talented and dedicated people to join us and love where they work. Energy Erectors is a proud subsidiary of MasTec (NYSE: MTZ), a Fortune 500 Company ranked by Energy News-Record as one of the leading contractors in the country. EEI is part of the MasTec Power Delivery segment. We are certified as a minority-controlled company by the National Minority Suppliers Development Council (NMSDC). Our rich diversity of people and ideas makes us a stronger, more innovative organization. The Substation Technician will provide engineering for the design of substation facilities for voltages up to and including 500 kV. Projects may be for the interconnection of Battery Energy Storage Systems (BESS), renewable generation, solar, wind, or other Distributed Energy Resources (DER). This includes new substations and switch yards, modifications, additions, and upgrades to existing facilities. Substation physical design responsibilities include overall engineering and analysis for new switch yards and substations, additions, and modifications. Includes equipment specifications and procurement support, layout and general arrangements for all major equipment and structures required for high voltage switch yards or substation. Responsibilities: • Work safely while assisting in new/existing construction and various tasks such as demolition, site preparation, excavating, backfilling and landscaping, trenching, pole setting, cable labeling, and other substation related tasks such as construction clean-up, • Read and understand system maps to become knowledgeable in general electric distribution system layout, system substation capacities and load areas, substation circuit feeds, and general system sectionalizing, • Assist with installing transformer and transformer banks, bus structures and switchgear, lines (underground/overhead), ground grid, control buildings, and other related substation material tasks, • Able to operate forklifts and maintain a valid forklift certification, • Will work with man baskets, skid steers, shovels, compactors, back hoes and other industry equipment, • Frequently work around energized high voltage systems requiring skill and care, • Maintain company tools in good working order, • Understands and complies with the Company's Code of Business Conduct and Ethics, • Other duties as assigned by Management Qualifications: • OSHA 10 and/or 30, • Obtain and maintain a valid State Class C driver's license, • Ability to carry and lift up to 50 pounds on a regular basis, • Ability to learn how to operate construction equipment and use hand tools, • Ability to work within a physically demanding work environment. MUST possess a Department of Labor (DOL) Journeyman completion certificate., • Preferred Qualifications:, • 3-5 years in Substation Tech experience Physical Demands and Work Environment: This job operates in a field environment. This role routinely requires extended periods of bending, squatting, climbing, kneeling, pushing, pulling, lifting, lifting in awkward positions, standing, and twisting. Also, working in inclement weather conditions, such as extreme heat, extreme cold, rain, ice, snow, and wind. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. This position is physically active, with lifting required. Must be able to bend and lift and carry up to 50 pounds. Clarity of vision at 20 feet or more or 20 inches or less, with the ability to judge distance and space relationships. Precise hand-eye coordination. Ability to identify and distinguish colors. Benefits available include Medical, Dental, Vision, Disability and Life insurance, a 401k plan and Employee Stock Purchase plan. MasTec is a publicly traded company MTZ (NYSE). Equal Employment Opportunity: The Company's policy is not to unlawfully discriminate against any applicant or employee based on race, color, national origin, ethnicity, sex, gender, sexual orientation, religion, marital status, age, disability, genetic information, or any other basis protected by applicable law and EEOC regulations. The Company also prohibits harassment of applicants or employees based on any of these protected categories.

SAM streamlines project delivery through a single, coordinated team, offering in-house capabilities across land surveying, aerial mapping, subsurface utility engineering (SUE), utility coordination (UC), GIS, BIM, and construction engineering inspection (CEI). Founded in 1994, Surveying And Mapping,

Cherokee Nation Defense Solutions (CNDS), part of Cherokee Federal, is seeking a GIS Scientist to deliver environmental compliance and remediation support, geospatial analysis, and mapping products for DoD-related projects. The successful candidate will manage tasks, produce GIS deliverables, and co

Cable One is seeking an OSP Designer II to design broadband plant extensions and support detailed engineering using CAD and GIS platforms.

Job Description VERSATILITY. EXPERTISE. With these two words, Vertex makes the promise that we will always be versatile in developing solutions to our clients’ unique needs and that we will always demonstrate expertise in our designated fields. Vertex is a leading North American provider of environmental services, assisting clients in achieving their development goals through our versatile suite of services. From the initial site selection, consultation and regulatory approval, through the construction, operation and maintenance phases, to conclusion and environmental cleanup, Vertex offers a diverse range of services throughout the life cycle of our clients’ projects. OVERVIEW Vertex Resources Services Inc. is currently accepting applications for an Environmental Field Technician to work in Carlsbad, New Mexico. The successful candidate will bring an understanding with basic practical experience with field work, report writing, client relationships and project coordination. The Environmental Field Technician will assist our environmental team in conducting environmental projects primarily within the oil and gas industry across North America. CANDIDATE QUALIFICATIONS • Bachelor’s degree in environmental studies, geology, ecology, biology, or closely related field, • Understanding of the environmental consulting industry, • Knowledge of upstream oil and gas, and infrastructure is an asset, • Understanding of technical and/or field experience preparing environmental documentation, • Experience working in field and office environments an asset, • Knowledge of applicable environmental and energy sector regulations, standards, and codes, • Strong environmental writing and communication skills, • Proficient MS Office experience (Word, Excel), • Ability to work independently and as part of a team, • Willing and able to travel RESPONSIBILITIES Provide technical field support on environmental projects within the oil and gas industry of the United States. Project types include but are not limited to: • Spill Response, • Environmental Planning & Permitting, • Environmental Monitoring & Inspection, • Remediation, • Reclamation, • Water Well & Groundwater assessments, • Regulatory Submissions, • Drilling Services, • Air Services Provide field level technician support including: • GIS Field Mapping Tools, • Soil Sampling, • Lab Analysis - Chain of Custody, • Water Sampling, • Responsible for both field and office execution of environmental projects with an emphasis on field work, • Perform other duties as needed LOCATION INFORMATION This position is based out of the Vertex office in Carlsbad, New Mexico ADDITIONAL INFORMATION • Compensation is commensurate with education and experience, • Medical and dental insurance, • Company Paid Time Off (PTO), • Retirement savings plans (401k), • Excellent company culture APPLY NOW With a track record of success, Vertex provides a fast-paced environment where people thrive. We recognize that each member brings a valuable skillset to the Vertex team and we make health, safety and community well-being a priority by supporting numerous endeavors at each of our locations across North America. At Vertex, we value teamwork through collaboration and provide support across the entire organization. If you think you have what it takes to play for the Vertex team, please apply. We would like to thank all applicants for their interest in this position, however only those selected for interviews will be contacted

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Seasonal Courier position with up to 12-week commitment, driving/operating company vehicles to provide delivery and pick-up of packages at customer locations.Essential Functions Provides courteous and efficient delivery and pick-up of packages.Checks shipments for conformance to FedEx features of se

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th