Heat jobs in San Diego, CaliforniaCreate job alerts

SEASONAL POSITION At SeaWorld, we're passionate about caring for animals. In fact, we've already rescued over 40,000 animals (and counting!). And we can save you from being stuck in just another job. Join us and help bring joy, excitement, and lasting memories to people from around the world. We're seeking enthusiastic, dedicated, and hard-working individuals to become our Ambassadors. Join us and play an important part on our incredible team! Locksmith At SeaWorld, we’re passionate about caring for animals. In fact, we’ve already rescued over 40,000 animals (and counting!). And we can save you from being stuck in just another job. Join us and help bring joy, excitement, and lasting memories to people from around the world. We’re seeking enthusiastic, dedicated, and hard-working individuals in a wide variety of roles. Join us and play an important part on our incredible team! What you get to do: • Maintain general purpose lock shop, • Perform preventive maintenance on all locking devices, • Process work orders as related to park locks/security, • Maintain Key Authorization Contracts/Lists for all parks, • Maintain high level of confidentiality and professionalism, • Provide support services to all department in matters of physical security, as related to locking hardware and mechanisms What it takes to succeed: • High school diploma or equivalent, • Possess a locksmith certification and have experience with Best Locking system, • Valid state driver’s license and able to obtain a company driver’s license, • Able to complete provided CPR training/certification, • Comfortable working around animals, • Excellent written and verbal communication skills, • Able to kneel, bend, and maneuver in tight spaces, • Able to stand/walk for extended periods of time, • Able to lift 30 pounds, • Able to push/pull 50 pounds, • Strong computer skills, • Working knowledge of all Microsoft Office applications, • Previous experience as a locksmith in a multi-site and complex work environment What else is important: • Must be able to lift, push, pull and/or carry up to 50 lbs, • Position engages in extensive walking and standing throughout entire work shift and climb/ascend heights, if needed, • Perform the following physical activities: kneeling, squatting, bend floor-to waist/waist-to-overhead, reach overhead, simple grasp and fine hand manipulation tasks (use of tools/keyboard/writing), • Must be able to work indoors and outdoors, in varying weather, to include extreme heat. Position may be exposed to fumes, dust, odors, and cold/heat temperature extremes, • Perform cleaning duties, including use of cleaning chemicals, • Work a flexible schedule/hour based on business need, to include opening, mid-, and closing shifts, nights, weekends, and holidays, • Must be flexible in work locations as placement will depend on business needs and career development opportunities Compensation: • 24.00 USD per hour The perks of the position: Ambassadors will enjoy a fun, fast-paced environment, and great teammates, as well as: • FREE park admission, • Discounts on park admission tickets and passes for family and friends, • Park discounts on food, merchandise, etc., • Scholarship opportunities, • Exclusive employee events and giveaways EEO Employer: SEAWORLD PARKS & ENTERTAINMENT IS AN EQUAL OPPORTUNITY EMPLOYER. ALL APPLICANTS WILL BE CONSIDERED WITHOUT REGARD TO AGE, RACE, COLOR, RELIGION, GENDER, NATIONAL ORIGIN, SEXUAL ORIENTATION, GENDER IDENTITY OR EXPRESSION, DISABILITY OR COVERED VETERAN STATUS.

Job DescriptionAs a valued member of our team, the yard worker will work in a company plant, or a facility used to store or produce premixed concrete or related aggregates. Under general supervision perform a variety of yard related duties, including cleaning and preventative maintenance activities to help keep production equipment and the yard in good working condition. Benefits: • PPO/HMO Health Insurance, Medical, Dental, Vision, Life, • PTO (Paid Time Off), • 401k Retirement Plan, • Overtime pay, • Direct Deposit, • Training Program, • Strong Safety Program, • Employee Assistance Program, • Employee Referral Bonus Pay:, • $18-$24 based on experience Essential Functions· Check, wash and perform minor repairs of equipment, plant, and other company assets. · Keep concrete loading area clean and organized. · Operate hydraulic lifting equipment, i.e., forklifts, front loaders, aerial lifts etc. · Operate front loader for loading or moving aggregates or concrete residues. · Check and clean the water-recycling system daily. · Inform plant manager or batch man of material usage throughout the day. · Report any problems found on equipment to Maintenance. · Operate service trucks or other company vehicles as needed. · Follow all safety rules, including the use of personal protective equipment applicable to the performance of his/her job duties. · Report safety hazards and incidents to appropriate management. · Conduct all assigned tasks according to procedures unless directed to do otherwise. · Safely load and unload equipment and materials onto vehicles/plant. · Assist in maintaining orderliness of yard. · Follow directives accurately and efficiently. · Effectively communicate with supervisor and co-workers.· Report potentially unsafe conditions.· Conduct facility maintenance and repairs as required.· Ability to lift, carry, push, and pull items weighing 10-45 lbs. when needed.· Will climb up and down ladders, stairs, and equipment throughout the course of a shift. Non-Essential Duties:· Safely operate hand and power tools, pumps, and electrical equipment.· Maneuver drivers/operators around and under the plant.· Assist in refilling water tanks on trucks.· Instruct drivers on the location to dump excess material.· Perform other duties as assigned by management. Core Competencies:· Attention to detail and excellent organizational skills.· Effective time management skills.· Use fine manipulation of controls and tools.Position Type/Expected Hours of WorkThis is a full-time position. Monday to Saturday from 6:00 am to 2:30 pm. Not eligible for remote work. Must be available 6 days a week and work overtime as job duties demand. Travel Required: Estimated 40%Preferred Education and Experience· Related experience preferred but not mandatory.· A valid driver’s license preferred. · Forklift, Loader or other equipment operator certificate is ideal.Additional Eligibility QualificationsAbility to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals. In addition, be able to communicate effectively with other personnel. Other DutiesPlease note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Physical Demands and Work EnvironmentThe work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts, hazardous chemicals, outside weather conditions and vibration. The employee is occasionally exposed to wet and/or humid conditions, high, precarious places, fumes or airborne particles, extreme heat and risk of electrical shock and elevated noise levels. Employees must wear required personal protective equipment; up to and including safety vest, hard hat, ear protection, gloves and safety glasses. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit for extended periods of time. The employee frequently is required to use hands to finger, handle or feel and reach with hands and arms. The employee is regularly required to stand, walk, climb, balance, stoop, kneel, crouch, crawl, talk or hear. The employee regularly assembles, disassembles, lifts, and carries chutes that can weigh up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Individuals must be able to pass a pre-employment physical and drug screen. This Organization Participates in E-VerifyEsta Organizacion Participa en E-Verify Associated Ready Mixed Concrete, Inc. is an EEO/AA (equal opportunity/affirmative action) company and does not discriminate on the basis of race, color, religion, religious creed, sex, sexual orientation, gender identity or expression, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, marital or familial status, military or veteran status, or any other characteristic protected by under federal, state or local law in the programs or activities which it operates. Associated Ready Mixed Concrete, Inc. es una compañía EEO/AA (igualdad de oportunidades/acción afirmativa) y no discrimina por motivos de raza, color, religión, credo religioso, sexo, orientación sexual, identidad o expresión de género, origen nacional, ascendencia, edad, condición física odiscapacidad mental, condición médica, información genética, estado civil o familiar, estado militar o de veterano, o cualquier otra característica protegida por la ley federal, estatal o local en los programas o actividades que opera. #zr

Job Description SIGN ON BONUS of $2000 for eligible external candidates & $1000 for eligible internal candidates. Paid in 2 increments: The first installment following 90 days of continuous employment. The second installment following 180 days of employment. The Territory Sales Representative role is an opportunity to channel your formidable energy and entrepreneurial swagger into extraordinary sales experiences, helping customers from the starting gate to the finish line with our cutting-edge products and services. In this consultative sales role, you will provide solutions by selling Cox data, video, & mobile services to residential customers while managing your assigned territory. Ambitious? To you, meeting new people and closing deals are second nature, and a little friendly competition is your favorite fuel. If this sounds like someone you see in the mirror each morning, then you may be a solid contender for a gig as a Territory Sales Representative. We are Cox Communications, part of the Cox family of businesses, and our teams are driving a wave of innovation and reimagining how we connect with our customers. What You’ll Do As a Territory Sales Representative, you’ll have the opportunity to generate new leads, sales, and upgrades. That means becoming a wiz at sales prospecting, referrals, partner relationships, and door-to-door canvassing and networking through an assigned territory. You’ll be the architect of your own face-to-face sales presentations, from creation to delivery, and you’ll be involved in touchpoints from assessing residential customer's needs to closing the sale. You’ll also: * Get to know and grow with homeowner associations, multi-dwelling unit managers, leasing agents and others to help generate sales. * Get to assist with training new hires, team with other departments, and partner with leadership to unearth new approaches to growth. * Work a shift that will include evening and weekend hours to maximize customer contact opportunities * Of course, you’ll need to maintain the highest ethical standards, follow company policy, and be professional when representing us, taking ownership of the customer experience. Sounds like a lot, huh? Well, with great responsibility comes…great rewards and recognition. What’s in it for you? Keep reading because this is important too! What’s In It For You As part of a customer loyalty-driven team, highly motivated individuals could receive a targeted annual amount of $76,754. This reflects the full-time salary base rate of at least $40,000 and target commission is $3,113 a month. Targeted total compensation may vary based on factors including, but not limited to: location, candidate experience level, and successful completion of minimum sales targets. There is potential to earn up to and beyond $109,968 annually as a high performer. Employees are provided with a two-month ramp-up period during which they earn full commission, allowing them time to adjust to their new role. Cox Communications rewards the talented, hard-working folks that help drive our growth. We’ve created an exceptional salary package, plus additional incentives including the highly-sought-after Winner’s Circle reward for top salespeople. We are an inclusive, pro-sales environment where different perspectives are valued and celebrated. Tools and training to up your game? We’ve got them. And we offer a work/life balance that allows you to enjoy things like family, friends, and lots of flexibility. We believe in taking good care of our team, so you’ll also have access to benefits like a 401(K) with company match, quality healthcare & life insurance, performance and recognition rewards for top salespeople, and coverage of travel expenses. We also know that everyone has unique concerns and priorities as we navigate life and manage our overall physical, mental and financial well-being, so we offer access to a lifestyle coach, paid time off to volunteer, employee discounts and even pet insurance (cool, right)? Bottom line, we take good care of our employees. Want to join us? Here’s who we are looking for… Who You Are You’re energetic; always on the move. You love a fast-paced work environment, and you like being outside and building relationships in the field. You relish new challenges, you’re competitive, and you’re ready to conquer the world. You’re also an ethical, organized and analytical person who enjoys meeting and working with diverse groups of people. Minimum Qualifications * High school diploma, GED or up to 2 years of relevant work experience * Ability to qualify for Certifications and licenses, as required by state and municipal laws, to sell Home Security * Proficient knowledge of and ability to operate a Smart Phone, iPad and a computer * Ability to work outside in all types of weather: heat, cold, rain, snow, etc * Ability to walk 1 ½ or more miles a day and up and down stairs within your residential territory * Must be able to carry an iPad with case and a light bag with marketing materials for 5 plus hours a day Preferred * Knowledge of local market with established local contacts * 1+ years of outside/field sales/door-to-door or related experience with quota requirements * Experience in residential direct sales, home security or telecommunications industry In California, we will consider non-driving candidates who use alternate means of transportation in accordance with applicable law Join the Cox family of businesses and make your mark today! Compensation: Compensation includes a base salary of $32,200.00 - $48,200.00. The salary rate may vary within the anticipated range based on factors such as the ultimate location of the position and the selected candidate's experience. In addition to the salary range identified herein, this role is also eligible for an annual incentive/commission target of $37,368.00. Benefits: The Company offers eligible employees the flexibility to take as much vacation with pay as they deem consistent with their duties, the company’s needs, and its obligations; seven paid holidays throughout the calendar year; and up to 160 hours of paid wellness annually for their own wellness or that of family members. Employees are also eligible for additional paid time off in the form of bereavement leave, time off to vote, jury duty leave, volunteer time off, military leave, and parental leave. Applicants must currently be authorized to work in the United States for any employer without current or future sponsorship. About Cox Communications Cox Communications is the largest private telecom company in America, serving six million homes and businesses. That’s a lot, but we also proudly serve our employees. Our benefits and our award-winning culture are just two of the things that make Cox a coveted place to work. If you’re interested in bringing people closer through broadband, smart home tech and more, join Cox Communications today! About Cox Cox empowers employees to build a better future and has been doing so for over 120 years. With exciting investments and innovations across transportation, communications, cleantech and healthcare, our family of businesses – which includes Cox Automotive and Cox Communications – is forging a better future for us all. Ready to make your mark? Join us today! Benefits of working at Cox may include health care insurance (medical, dental, vision), retirement planning (401(k)), and paid days off (sick leave, parental leave, flexible vacation/wellness days, and/or PTO). For more details on what benefits you may be offered, visit our benefits page. Cox is an Equal Employment Opportunity employer - All qualified applicants/employees will receive consideration for employment without regard to that individual’s age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. Statement to ALL Third-Party Agencies and Similar Organizations: Cox accepts resumes only from agencies with which we formally engage their services. Please do not forward resumes to our applicant tracking system, Cox employees, Cox hiring manager, or send to any Cox facility. Cox is not responsible for any fees or charges associated with unsolicited resumes. Company DescriptionCox Communications rewards the talented, hard-working folks that help drive our growth. We’ve created an exceptional salary package, plus additional incentives including the highly-sought-after Winner’s Circle reward for top salespeople. We are an inclusive, pro-sales environment where different perspectives are valued and celebrated. Tools and training to up your game? We’ve got them. And we offer a work/life balance that allows you to enjoy things like family, friends, and lots of flexibility.Cox Communications rewards the talented, hard-working folks that help drive our growth. We’ve created an exceptional salary package, plus additional incentives including the highly-sought-after Winner’s Circle reward for top salespeople. We are an inclusive, pro-sales environment where different perspectives are valued and celebrated. Tools and training to up your game? We’ve got them. And we offer a work/life balance that allows you to enjoy things like family, friends, and lots of flexibility.

Job Description SolarTech is hiring experienced Solar Installers AND FOREMAN for clients across the Los Angeles area. We offer consistent work, full benefits, and promote a team oriented culture. As a Solar Installer, you will work alongside experienced professionals to install, maintain, and service residential solar panel systems. If you are passionate about renewable energy and enjoy hands-on work outdoors, we want to hear from you! Key Responsibilities * Install photovoltaic (PV) solar panels, racking systems, and inverters on residential rooftops according to project plans and safety standards (Osha) * Assist with site preparation, including measuring, layout, and ensuring safe work conditions * Identify and address electrical, environmental, and safety hazards on-site. * Perform routine maintenance, troubleshooting, and repairs on installed solar systems * Maintain accurate records of work performed and update job status as needed. * Ensure compliance with OSHA, local, and company safety standards, including proper use of PPE. * Collaborate with project management and warehouse teams to coordinate materials and scheduling. * Provide excellent customer service and communicate effectively with clients and team members. * Attend ongoing training sessions to stay current on installation methods and safety procedures. Requirements * High school diploma or equivalent required; technical training or relevant certifications a plus. * 2+ years of experience in solar panel installation required * Familiarity with hand and power tools, conduit bending, and safe ladder use45. * Ability to work at heights and in various outdoor conditions, including heat and confined spaces5. * Physically able to lift and carry up to 50 pounds, and work on your feet for extended periods5. * Valid driver’s license, reliable transportation, and clean driving record required5. * OSHA 10-Hour Construction Certificate preferred. * Strong attention to detail, safety, and quality workmanship. * Good communication and teamwork skills. Compensation * Solely based on experience - Foreman will be above the stated pay range Benefits * Opportunities for advancement * Full dental, health, vision, and retirement plan * Ongoing training and professional development * Supportive team environment * Company vehicle and gas card will be given to Foreman Schedule * Full-time, Monday to Friday * Occasional weekends as needed * Overtime pay Company DescriptionWe are a premier solar energy provider dedicated to transforming lives through accessible clean energy solutions since 2001. Our strategic approach targets individuals actively seeking solar alternatives, ensuring optimal allocation of resources and maximizing impact where it matters most. We fundamentally believe that by reducing energy expenditures, we create expanded opportunities for individuals and families. This reduction in costs translates directly to increased resources for life's priorities—effectively creating "more room for good" in our clients' lives. We remain steadfastly committed to positioning clean energy not merely as an option, but as an accessible and economically viable reality for every customer we have the privilege to serve.We are a premier solar energy provider dedicated to transforming lives through accessible clean energy solutions since 2001. Our strategic approach targets individuals actively seeking solar alternatives, ensuring optimal allocation of resources and maximizing impact where it matters most. We fundamentally believe that by reducing energy expenditures, we create expanded opportunities for individuals and families.\r\n\r\nThis reduction in costs translates directly to increased resources for life's priorities—effectively creating "more room for good" in our clients' lives. We remain steadfastly committed to positioning clean energy not merely as an option, but as an accessible and economically viable reality for every customer we have the privilege to serve.

Job Description SolarTech is hiring experienced Solar Installers AND FOREMAN for clients across the Los Angeles area. We offer consistent work, full benefits, and promote a team oriented culture. As a Solar Installer, you will work alongside experienced professionals to install, maintain, and service residential solar panel systems. If you are passionate about renewable energy and enjoy hands-on work outdoors, we want to hear from you! Key Responsibilities * Install photovoltaic (PV) solar panels, racking systems, and inverters on residential rooftops according to project plans and safety standards (Osha) * Assist with site preparation, including measuring, layout, and ensuring safe work conditions * Identify and address electrical, environmental, and safety hazards on-site. * Perform routine maintenance, troubleshooting, and repairs on installed solar systems * Maintain accurate records of work performed and update job status as needed. * Ensure compliance with OSHA, local, and company safety standards, including proper use of PPE. * Collaborate with project management and warehouse teams to coordinate materials and scheduling. * Provide excellent customer service and communicate effectively with clients and team members. * Attend ongoing training sessions to stay current on installation methods and safety procedures. Requirements * High school diploma or equivalent required; technical training or relevant certifications a plus. * 2+ years of experience in solar panel installation required * Familiarity with hand and power tools, conduit bending, and safe ladder use45. * Ability to work at heights and in various outdoor conditions, including heat and confined spaces5. * Physically able to lift and carry up to 50 pounds, and work on your feet for extended periods5. * Valid driver’s license, reliable transportation, and clean driving record required5. * OSHA 10-Hour Construction Certificate preferred. * Strong attention to detail, safety, and quality workmanship. * Good communication and teamwork skills. Compensation * Solely based on experience - Foreman will be above the stated pay range Benefits * Opportunities for advancement * Full dental, health, vision, and retirement plan * Ongoing training and professional development * Supportive team environment * Company vehicle and gas card will be given to Foreman Schedule * Full-time, Monday to Friday * Occasional weekends as needed * Overtime pay Company DescriptionWe are a premier solar energy provider dedicated to transforming lives through accessible clean energy solutions since 2001. Our strategic approach targets individuals actively seeking solar alternatives, ensuring optimal allocation of resources and maximizing impact where it matters most. We fundamentally believe that by reducing energy expenditures, we create expanded opportunities for individuals and families. This reduction in costs translates directly to increased resources for life's priorities—effectively creating "more room for good" in our clients' lives. We remain steadfastly committed to positioning clean energy not merely as an option, but as an accessible and economically viable reality for every customer we have the privilege to serve.We are a premier solar energy provider dedicated to transforming lives through accessible clean energy solutions since 2001. Our strategic approach targets individuals actively seeking solar alternatives, ensuring optimal allocation of resources and maximizing impact where it matters most. We fundamentally believe that by reducing energy expenditures, we create expanded opportunities for individuals and families.\r\n\r\nThis reduction in costs translates directly to increased resources for life's priorities—effectively creating "more room for good" in our clients' lives. We remain steadfastly committed to positioning clean energy not merely as an option, but as an accessible and economically viable reality for every customer we have the privilege to serve.

Job Description Labor One is hiring Journey-Level Carpenters for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description:To perform this job an individual must be able to understand the full scope of work of any assigned job and successfully complete the required tasks with minimal supervision. Tasks include constructing, installing, repairing, and fabricating structures (primarily wood) to protect ship's equipment, outfitting the drydock with docking blocks, and outfitting ships in accordance with specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. High school degree or equivalent (GED), or vocational school degree. Must have six (6) years of related experience. QUALIFICATIONS, DUTIES, AND RESPONSIBILITIES -Must possess the skill sets of subordinate grades of the labor class. -Must be able to interpret and work from drawings, job specifications, instruction manuals, manufacturer's handbooks, change orders, and contract specifications. -Must possess a thorough understanding of equipment and work processes used in marine carpentry, joiner, and drydock blocking operations. -Must be able to operate and care for Carpenter Shop equipment, portable power tools, and hand tools. Layout, cut, and fabricate products from blueprints, owner specifications, and sketches. -Must be able to work with US standard and metric measurements and be able to add, subtract, multiply and divide. -Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor. -Carry out instructions furnished in written, oral, or diagram form. Deal with unexpected events related to your assigned task in a professional manner. -Accountable for completion of daily work assignments including the completion and signatures to work completion and quality. -Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor. Personnel are accountable for completion of daily work assignments. -Must comply with OSHA standards and the shipyards best safety practices. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) -Keep the work area clean and safe at all times, especially at the end of the shift. -Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. COMMUNICATION SKILLS The candidate must be able to read and comprehend basic instructions, short correspondence, and memos to the extent necessary to accomplish the work requirements. Must be able to interpret specifications and drawings and possess the ability to write comprehensive Condition Found Reports (CFR) describing the problem found, and corrective action required. Must be able to communicate hazardous conditions to other employees. WORK ENVIRONMENT -The work environment described are representative of those an employee will encounter while performing the essential functions of this job. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished from mechanical lifts. -The working environment in the shipyard varies from a normal office environment to outside weather conditions of precipitation, wind, extreme cold, and extreme heat and high humidity. When working inside of vessels the environment may be smoky, hot or cold, and low levels of illumination may be present. -The noise level in the shipyard environment is usually loud, especially inside of vessels. -----The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: -The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. -While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift 40 Hrs per Week OT per hiring Managers approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job DescriptionDescription: Shift: 2nd Schedule: Monday - Friday, 2:00 PM - 10:30 PM SUMMARY The role of a Manufacturing Associate I is crucial in maintaining the efficiency and effectiveness of the production process. They actively participate in meeting production targets and deadlines, which is essential in ensuring that the company can accurately and timely deliver customer orders. ESSENTIAL JOB FUNCTIONS • Monitor machinery and equipment used in manufacturing, such as molded parts, to ensure products are made to specification., • Remove the parts from the machine manually., • Conduct visual inspections of the parts to check for pre-prescribed defects., • Document inventory and quality management production data, including quantities produced, defects identified, and materials used., • Correct certain defects, such as flash, using general tools based on engineering and quality feedback., • Assemble subcomponents of products, following detailed assembly instructions., • Package finished products for shipping, including labeling and preparing items according to customer orders., • Maintain a clean and safe work environment by adhering to safety protocols and cleaning schedules., • Participate in team meetings to discuss production goals and continuous improvement strategies and address concerns about the manufacturing process., • Available to cover for other associates during their lunch and break times. SUPERVISOR RESPONSIBILITIES This role is purely as an individual contributor. Requirements: QUALIFICATIONS To succeed in this job, an individual must satisfactorily perform each essential job function. The requirements below represent the required knowledge, skill, and ability. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. EDUCATION and EXPERIENCE • A high school diploma or equivalent, e.g., vocational training, is required., • Familiarity with standard manufacturing practices and equipment preferred., • Experience in quality assurance (QA) and regulatory compliance preferred., • Experience in basic troubleshooting of manufacturing processes preferred., • Experience in the medical industries or molding businesses preferred. LANGUAGE REQUIREMENTS • Excellent verbal and written communication skills in English., • Conversational in any other language preferred. MATHEMATICAL SKILLS • Basic arithmetic: add, subtract, multiply, and divide whole numbers. JOB SKILLS • Familiar with Microsoft Office tools and SharePoint basics, eager to learn and expand proficiency., • Basic knowledge of Continuous Improvement, Lean Manufacturing, and the 5S Methodology., • Able to identify process deviations and product defects., • Able to effectively allocate resources to ensure timely product delivery that meets the required specifications., • Ability to set up, operate, and maintain equipment to ensure output meets established quality standards., • Dependable and willing to work overtime when necessary. PHYSICAL DEMANDS The employee will regularly engage in activities such as using hands to finger, handle, or feel and communicating verbally. Additionally, the employee will frequently need to reach with hands and arms while standing and walking as part of the role. Occasional lifting and movement of objects weighing up to fifty (50) pounds may be required. This position also demands specific vision capabilities, including close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. According to ADA regulations, reasonable accommodation will be provided to ensure that individuals with disabilities can perform the job's essential functions. WORK ENVIRONMENT A work environment in a plant is the physical and social setting where goods production occurs. Depending on the type of product, process, and plant, the work environment may vary in terms of noise, temperature, safety, and demand. Common characteristics of a work environment in a plant are the use of machinery and exposure to hazards such as chemicals, heat, dust, or noise, with a culture of teamwork, communication, and continuous improvement. ENVIRONMENTAL POLICY Providien Thermoforming is dedicated to identifying and reducing the environmental impact of its operations, activities, and products. We are committed to complying with all applicable laws and other environmental regulatory requirements. We are also committed to preventing pollution and improving our environmental performance in all our global operations. This will be achieved through a comprehensive Environmental Management System that provides the framework for setting and reviewing Providien Thermoforming’s environmental objectives and targets. PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTS • ASTM F–2412–2005, ANSI Z41–1999, or ANSI Z41–1991 rated safety toe shoes in specific areas., • Clear ANSI Z87.1 safety-rated glasses in specific areas., • Hearing protection in specific locations., • Ability to compile with JSA in specific areas. TRAVEL Travel is not required for this position. SALARY INFORMATION According to several states' laws, this position's salary range falls between $17.25 and $19.25 hourly/annually. However, this salary information is merely a general guideline. When extending an offer, Providien Thermoforming considers various factors such as the position's responsibilities, scope of work, candidate's work experience, education/training, essential skills, internal pay equity, and market considerations.

Job DescriptionDescription: The Pantry is responsible for the preparation of ingredients and stations used in the cooking process, as well as maintaining the kitchen and ensuring it is clean and sanitized. They help keep the kitchen organized and running efficiently. They ensure proper food handling, sanitation, and following food storage procedures. Requirements: • Minimum 6 months in a prep or cook position., • Knowledge of safety procedures, including safe temperatures at which ingredients must be kept and to which food must be prepared to avoid foodborne illness., • A desire to help where needed and the ability to work as part of a team., • Ability to work positively and maintain composure in a fast-paced environment., • Ability to follow direct orders and recipes and to correctly prepare dishes to the standards of the restaurant., • Manual dexterity and hand-eye coordination to handle tools, such as knives for chopping, slicing, cutting, and dicing., • Must be able to stand, walk, reach, bend, stoop, wipe, and handle extreme heat for extended periods of time., • Must be able to frequently lift up to 35 pounds and occasionally lift/move up to 50 pounds., • Excellent communication skills., • Exceptional attention to detail., • Exhibit a professional appearance and mannerisms., • Food Handler Certification.

Job Description The hours for this position are 10 hour shifts x 4 days per week between Monday - Friday. Exact days to be determined upon hire. JOB SUMMARY The Manufacturing Associate II, Cell Therapy is responsible for performing well regulated GMP aseptic cell culture activities including media preparation, cell thaws, cell expansion, cell harvesting, and cryopreservation using standard cell culture technologies in a cleanroom environment. The Associate will be responsible for following Batch Production Records, Standard Operating Procedures, and work instructions in manufacturing spaces. The Associate will be responsible for participating in the maintenance of critical supplies, equipment, product testing, product storage and product distribution. RESPONSIBILITIES • Experience in aseptic technique, clean room gowning and have knowledge of Good Manufacturing Practices (GMPs)., • Documenting of each task, understanding verifier versus operator functions, following cleaning procedures, and ensuring aseptic processing techniques., • Daily updating of Production spreadsheets, review of completed documents, addressing corrections, and communication of document readiness to management., • Responsible for documenting deviations and reporting deviations to department management, • Receipt and processing of blood, cord, blood, and tissue collection processes under cGMPs., • Execution of colony forming units assay procedures (CFUs), set up samples for sterility testing, performs flowcytometry assays for viability and cell identification., • Responsible for execution of cell culture manufacturing: cell thawing, cell passaging, cell feeding, harvesting, cell counting, cryopreservation, and stability testing., • Performs sample processing, intermediate formulations, storage, and distribution of product, • Operation of supporting equipment for daily manufacturing., • Train on and actively participate in revising of Standard Operating Procedures (SOPs), Batch Production Records (BPRs), Work Instructions, and Forms., • Supports environmental monitoring processes including personnel monitoring, suite monitoring as defined by the facility, • Assist with the weekly maintenance/cleaning of equipment and cleanroom to support GMP production., • Assist Subject Matter Expert (SME) with providing training for new and existing employees., • Assist with the ordering, stocking, release of supplies/materials to meet production demands, • Provides feedback and support in drafting and implementing documents and procedures for department development/process improvement., • Help identify potential equipment or process issues., • Supports the Excellos safety, GMP and Quality Plan., • Participates in department meetings, proficiency testing, and educational programs. WORKING ENVIRONMENT • Normal laboratory environment with biohazard precautions., • Must work with living human cells and various chemicals., • May be exposed to blood or bodily fluids that may be capable of transmitting diseases., • May be exposed to hazardous chemicals., • Will be working with liquid nitrogen., • May be called on to workdays or hours other than routinely scheduled hours, work overtime hours, or potentially work through breaks, if necessary. PHYSICAL REQUIREMENTS • Must be able to stand long hours., • Must be able to sit at biosafety cabinet for hours, while aseptically manipulating product., • Must be able to communicate clearly., • May be required to lift 50 pounds. EQUIPMENT USED • Laboratory processing equipment (examples include, but are not limited to: centrifuges, heat sealers, sterile connecting devices, biosafety cabinets, cell counters, flow cytometers, incubators, bioreactors, cell separators)., • Normal office equipment such as: telephone, computer, cell phone, printer, copier, fax, scanner., • General laboratory equipment (examples include, but are not limited to: barcode scanners, scales, shippers, refrigerators, freezers). QUALIFICATIONS Education: • Bachelor’s degree in cell biology or related field with 1 + years industry experience or • Associate degree in related area and/or a Biotech Program certificate from an accredited college with 2 + years industry experience. Skills: • Strong understanding of aseptic technique and Good Manufacturing Practices (GMP)., • Proficient in standard cell culture methods including cell counts using Hemocytometer, perform calculations including cell concentration determination, seeding densities, % viability, weight measurements, and volume., • Interpersonal skills to establish professional relationships both internally and externally., • Critical thinking, creativity, and innovative thinking., • Detail oriented with the ability to set priorities and organize daily work requirements., • Must be able to work both as a team member and independently, as required., • Proficient in professional communication both written and oral, which is clear and precise., • Must keep Management informed on any technical and/or operational issues that arise., • Must be flexible, as production priorities, timelines, and processes can change regularly., • Integrity and discretion – ability to maintain confidentiality., • Ability to perform under pressure and work under stressful situations. Certifications/Licenses: • Biotech certificate valued, not required

Job DescriptionDescription: Job Summary: The Dishwasher is responsible for washing all wares including pots, pans, dishes, utensils, and glasses, by hand or using dishwashers. Correctly places and stores clean equipment, dishes, and utensils in assigned areas. They help keep the kitchen clean, organized, and running efficiently. Compensation & Benefits: • $16-19 per hour plus tips, • Paid Sick Leave, • Medical, Dental, & Vision Insurance Available to Full-Time Employees, • Flexible schedule, • Discounts on meals, • Maintains the dish area ensuring that all dishware, glassware, utensils, pots, & pans are thoroughly cleaned & sanitized., • Cleans and organizes the back of house, including coolers, freezers, and storage areas., • Cleans floors and removes garbage in front of house and back of house, restrooms, and parking lot., • Maintain a clean and safe work area, including handling utensils, equipment, and dishes., • Maintain food safety and sanitation standards., • Accepting or rejecting ingredients from suppliers., • Execute opening and closing procedures., • Operate kitchen equipment such as broilers, ovens, grills and fryers., • Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Requirements: Qualifications/Requirements: • No experience required. We offer on the job training., • A desire to help where needed and the ability to work as part of a team., • Ability to work positively and maintain composure in a fast-paced environment., • Manual dexterity and hand-eye coordination to handle tools, such as knives for chopping, slicing, cutting, and dicing., • Must be able to stand, walk, reach, bend, stoop, wipe, and handle extreme heat for extended periods of time., • Must be able to frequently lift up to 30 pounds and occasionally lift/move up to 50 pounds., • Excellent communication skills., • Exceptional attention to detail., • Exhibit a professional appearance and mannerisms., • Food Handler Certification.

Company Overview: Allied Universal®, North America’s leading security and facility services company, offers rewarding careers that provide you a sense of purpose. While working in a dynamic, welcoming, and collaborative workplace, you will be part of a team that contributes to a culture that positively impacts the communities and customers we serve. We offer a comprehensive benefits package that may include medical, dental, and vision coverage, life insurance, a retirement plan, employee assistance programs, company discounts, and other perks, depending on the position and eligibility. Job Description: Pay Rate: $22.00/HR Full-Time Security Officer needed for a financial building located in La Jolla. Must have a California Guarrd Card and excellent customer service. Schedule: Monday - Friday, 6:45 AM - 3:15 PM. This position is responsible for the safety and security of the facilities they protect. Our Financial Center Officers allow us to accomplish our company’s core purpose which is “to service, secure and care for the people and businesses in our communities.” Financial Center Security Officers act as a visible deterrent to crime and client rule infractions; they detect and report suspicious, unsafe or criminal acts at or near their assigned posts which may be a threat to the property, clients, guests or employees at the site. RESPONSIBILITIES: • Ensure the facility is provided with high quality security services to protect people and property., • Maintains proficiency in the use of all assigned protective equipment, restraint devices and weapons., • Report safety concern, security breaches and unusual circumstances both verbally and in writing., • Preserves order and acts to enforce regulations and directives for the site pertaining to personnel, visitors and premises., • Monitors closed circuit television systems and alarms; Reports safety concerns, security breaches and unusual circumstances both verbally and in writing., • Maintains awareness and familiarity with the site-specific operations performance manual and post orders., • Meets and continues to meet any applicable state, county and municipal licensing and permit requirements for Armed Security Officers and specific protective device and weapons qualifications., • Build, improve, and maintain effective relationships with both client employees and guests., • Answer questions and assist guests and employees; Answer phones or greet guests/ employees in a professional, welcoming manner., • Patrols the facility on foot or in a vehicle., • High school diploma or equivalent required; at least 21 years of age, • Licensing requirements are subject to state and/or local laws and regulations and may be required prior to employment, • Be able to obtain a valid Guard License as required in the state for which you are applying, maintain current active status of all required License at all times, and must carry the License at all times while on duty. We provide free training for any hires who do not possess a card/license., • Current state driver’s license, clean driving record (no points in prior 3 years), minimum level of insurance as required by Company policy, and ability to safely operate a vehicle required., • As a condition of employment, employee must successfully complete a background investigation and a post-offer/pre-employment drug/alcohol test and may be required to pass a Driver’s Record check., • Energetic and focused personality with a demonstrated ability to take initiative, successfully handle and prioritize multiple competing assignments and effectively manage deadlines., • Ability to handle both common and crisis situations at the client site, calmly and efficiently., • Professional, articulate and able to use good independent judgment and discretion. Must have proven ability to maintain correspondence, discussions and materials in strictest confidence. Must be able to work overtime as needed., • Must possess effective oral and written communication and interpersonal skills. Ability to successfully interact at all levels of personnel and the general public in a professional and effective manner, including with clients, • Have intermediate computer skills to operate innovative wireless technology at client specific sites., • Highly organized and ability to follow procedures concisely and consistently; high level of compliance and unwavering integrity to oversee and ensure policies are enforced in a self-directed environment., • While performing the duties of this job, the employee is regularly required to use both hands, is frequently required to stand, sit, stoop, talk and hear (communicate verbally in person and via regular telephone equipment), and must be able to read computer screens, correspondence and reports in English., • The employee must constantly walk, stand, reach with both hands and arms, and must be able to drive a vehicle. The employee may occasionally lift and/or move up to 40 pounds. May be required to climb stairs on an intermittent basis at client sites., • Constant use of eyes (correctable vision to normal level required) to observe, read, interact with public and co-workers, view security monitors; includes hand/eye coordination, • Work in various environments including adverse outdoor conditions such as cold, rain or heat, • Must be able to focus and multi-task in a busy environment, with the ability to successfully handle stressful situations in a calm and professional manner. Includes being able to effectively manage multiple employees with diverse personalities and engage them to perform at optimum levels., • Remain flexible to ever changing environments; adapt well to different situations. If you have any questions regarding Equal Employment Opportunity, have difficulty using the online system and require an alternate method to apply, or require an accommodation at any time during the recruitment and/or employment process, please contact our local Human Resources department. To find an office near you, please visit: .

Job Description Labor One is hiring Journey-Level Pipe Welders for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: -This position is responsible for welding pipe of various metals on a ship or in a shop to support mechanical repairs and modernization of marine vessels including US Naval, Military Sealift Command, and commercial ships. The journeyman welder is also responsible for providing direction to assigned helpers. -The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE: 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information such as conditions found by writing condition reports that include recommended corrective action., 5. Must have a thorough knowledge of SMAW, FCAW, and GMAW theory., 6. Must be able to certify in P-3 joint with permanent backing ring, and P-14 socket weld joint:, 7. SMAW, 8. GTAW, 9. FCAW OR, 10. Silver Brazing, 11. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals., 12. Must possess a working knowledge of equipment and work processes used in marine pipe welding., 13. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 14. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 15. Must have four (4) years of pipe welding experience. DUTIES AND RESPONSIBILITIES: 1. Provide direction to a pipe welding helper, if assigned, as needed to complete the assigned tasks., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and pipe shop supervisor., 3. Work shifts and overtime as assigned., 4. Be accountable for completion of daily work assignments., 5. Comply with OSHA standards and the shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Ensure the work site is ready for hot work before commencing hot work. Communicate with the Fire Watch and provide direction as necessary., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 10. Confer with the supervisor to resolve unexpected events related to your assigned task. Carry out written or oral instructions. Work Tasks Include: a. Inspect and prepare the area for hot work, including gas free certifications and tag-outs, before commencing any hot work. b. Prepares work area for production welding by inspecting joints and cleaning as required. c. Inspect welds for defects. Confer with supervision before correcting deficiencies. d. Document existing conditions using Condition Found Reports. e. Ensure gas free certifications are accurate and up to date. f. Assist with Lock-out Tag-out for work being performed. WORK ENVIRONMENT: -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: -The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. -While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. -The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift only 40 hours a week / OT with approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job DescriptionCompany Description Welcome to CoreDux USA, a leading innovator in the machining industry located in the vibrant Sorrento Valley area of San Diego. As a rapidly growing company, we specialize in providing high-precision machining solutions that cater to a wide array of industries, including aerospace, automotive, medical devices, and consumer electronics. Our commitment to quality and excellence has earned us a reputation for delivering exceptional products and services to our clients. At CoreDux USA, we pride ourselves on our state-of-the-art facility, equipped with cutting-edge technology and advanced machinery, enabling us to meet the most demanding project requirements with unparalleled accuracy and efficiency. Our team of skilled professionals is dedicated to pushing the boundaries of innovation and delivering results that exceed expectations. As we continue to expand our operations, we are looking for talented and motivated individuals to join our team. We offer a dynamic work environment that fosters professional growth, collaboration, and creativity. If you're passionate and eager to be part of a company that values innovation and excellence, CoreDux USA is the perfect place for you. Join us on our exciting journey and contribute to shaping the future of the machining industry! Job Description Reporting To: Quality Manager Salary: $37- 41/hr Role Objective Primary duty is to conduct mechanical and visual inspections of machined parts, sub-assemblies, and assemblies from customer supplied blueprints and specifications. Key Responsibilities • Mechanical inspection of parts including first article, in-process, and final., • Verification of materials and processes; and verification of certifications from sub-tier vendors., • Completion of all applicable paperwork (working to AS 9100 standards)., • Performance of various other quality functions as required to ensure the timely delivery of precision machined parts to the customer., • Cleanliness of the work area and proper handling of tools, equipment, and stock to prevent damage or loss., • Assist in training other inspectors., • Related work includes calibration of inspection tools, and development and enforcement of quality systems procedures necessary to satisfy ISO, military, and customer specifications., • Perform other duties as requested. May require training in hazardous material handling depending on job assignment.Qualifications, • Minimum 8 years’ experience in mechanical inspection., • Must work to close tolerances in a high volume environment., • Ability to perform complex set-ups for part inspection., • Must be proficient with complicated blueprints and advanced job shop mathematical calculations., • Familiar with all facets of inspection techniques, including CMM operation, a wide range of inspection and measuring tools, and surface plate set-ups., • Must be able to follow written instructions and to work with no supervision., • Must have strong organizational skills and be familiar with documentation requirements for an ISO-based quality system., • Must have the ability to read, write, comprehend reading instructions and documentation in English, • Thorough understanding of true position tolerancing and application of Cartesian coordinate systems., • Proficient in advanced CMM programming using PC DMIS 4.2 or later Additional Information Physical Requirements • Ability to lift up to 50 pounds., • Ability to stand for long periods and move between different workstations., • Ability to wear required PPE for extended periods. Diversity, Equity, and Inclusion (DE&I) Statement At CoreDux USA, we are committed to fostering a diverse, equitable, and inclusive workplace. We believe that diversity in our workforce enhances creativity, innovation, and problem-solving. We strive to create an environment where every employee feels valued, respected, and empowered to bring their authentic selves to work. Equal Employment Opportunity (EEO) Statement CoreDux USA is an Equal Opportunity Employer. We do not discriminate on the basis of race, color, religion, sex (including pregnancy, childbirth, breastfeeding, and related medical conditions), gender, gender identity, gender expression, sexual orientation, marital status, national origin, ancestry, citizenship status, age, physical or mental disability, medical condition, genetic information, military or veteran status, or any other characteristic protected by applicable federal, state, or local laws. We are dedicated to providing reasonable accommodations for qualified individuals with disabilities and disabled veterans in our job application procedures. Benefits: • 401(k), • Dental insurance, • Employee assistance program, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Vision insurance, • Long Term Disability Benefits, • Short Term Disability Benefits, • Paid Time Off, • Birthday Lunches, • Company Paid Holidays, • School Visitation Leave Thank you for your interest in our job opening, but we are not engaging recruiters for this position and will not respond to recruiter / agency inquiries.

Job Description Location: San Diego, CA, US Company: Standard Ship Repair Additional Locations: Bremerton, WA, US Level of Experience: Experienced Reports to: General Manager Salary Status: Hourly / Non-Exempt Summary/Objective: A shipyard industrial hygienist job focuses on protecting workers from occupational health hazards in a maritime environment. This role involves identifying, assessing, and controlling risks associated with chemicals, physical agents (like noise and heat), and ergonomic issues. They conduct workplace assessments, collect samples, develop control measures, and provide training to ensure compliance with health and safety regulations. Duties include, but are not limited to: • Identify potential health hazards in the shipyard environment, including chemical exposures, physical agents like noise and vibration, and ergonomic factors., • Conduct independent worksite inspections for hazardous materials such as asbestos, lead and other substances in various shipyard settings., • Provide industrial hygiene expertise, surveys, and investigations to identify, evaluate, and control hazards affecting shipyard employees., • Conduct atmospheric testing for flammable, toxic, and oxygen-deficient or enriched atmospheres on confined spaces., • Develop and implement sampling plans for hazardous materials., • Analyze and interpret hazardous material sampling data., • Prepare and deliver reports on hazardous materials findings and recommendations., • Stay up to date on the latest hazardous materials regulations and bast practices. Education / Experience Required: • Demonstrated expertise within applicable trade with 1 to 2 years of relevant experience., • Understand the Naval Ship Repair requirements and working environment., • Experience utilizing industrial hygiene concepts and practices in ship repair and related industrial activities., • Experience recognizing and evaluating health hazards and implementing health hazard controls, • Experience administering occupational safety and health programs and performing industrial hygiene duties such as lead and asbestos sampling., • Proficiency in standard office computer software., • Must be able to work in the US. Position Type/Expected Hours of Work: This is a full-time position requires 40+ hours of work per week. M-F 0600 - 1430 (or as otherwise assigned by General Manager) with pre-scheduled overtime as needed. Work Environment: This job operates in an office environment and shipyard work environment. Travel: This position may require ability to travel. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be available to work at heights, confined spaces and have the ability to climb staircases and ladders of varying sizes. May involve carrying objects that weigh up to 50 lbs., frequent stooping, bending, crawling, reaching, and walking. Work Authorization/Security Clearance (if applicable) • Completion of a satisfactory background check, • Passing a drug test and physical examination, • Eligibility to work in the US. AAP/EEO Statement: Standard Inspection Services is an Equal Opportunity Employer: minority/female/disability/veteran/sexual orientation, encouraging diversity in the workplace and a drug-free workplace. Completion of a satisfactory background check. Must pass a drug test and physical examination.

Job Description JOB DESCRIPTION Employment Type: Full Time/Hourly/Non-Exempt Salary Information: $28.50 - $40.71/Hourly Who We Are Continental Maritime of San Diego, a Titan company, is a certified Master Ship Repair Contractor for the U.S. Navy. Our skilled professionals have performed hundreds of ship repairs for the Navy and Military Sealift Command. CMSD does repair on all types of major surface vessels including CVN, CG, and DDG, and all types of amphibious ships including LHD, LHA, LSD, LPD, and auxiliary ships. Our work also includes repairs and alterations to a wide range of Combatant, Hull, Mechanical and Electrical, and Habitability Systems. Position Specifics Continental Maritime of San Diego is currently seeking an Outside Machinist Journeyman to help support our operations. The Outside Machinist Journeyman is responsible for the overhaul, alignment, and adjustment of machinery equipment in place onboard ship; cut, shape, and drill various materials; assemble and disassemble mechanical parts according to technical manuals; clean and preserve parts; perform related tasks as assigned, some of which may become essential to the position. Minimum Requirements • Working knowledge of ship layout, • Trained in machine shop equipment, alignment process, and blueprint reading, • Ability to use hand tools and measuring devices, • Ability to work at heights and in confined spaces, • Must be able to access and move around ship safely, • Ability to read and comprehend technical manuals, • A minimum of 5 years of relevant experience in required, • US Citizenship is required, • The ability to obtain a DBIDS credential is required Physical Requirements • Most work is performed aboard ships or in industrial conditions. Shop, shipboard, warehouse, industrial environment, • May be exposed to fumes and irritants including welding/burning fumes, paints, oils, greases and various cleaning solutions and solvents, noise, high heat and humidity hazards while wearing the required Personal Protective Equipment (PPE), • Frequently moves throughout the shipyard, • Works at heights and in confined spaces, • Must be able to ascend/descend stairs/ladders/ramps, aboard ships in shipyards under industrial conditions and in confined spaces, • Must be able to move heavy equipment and boxes, weighing up to 50 pounds, • May be exposed to rapid changes in microclimates, industrial processes, and other environmental factors while collecting data, providing direction, and observing performance of task teams The Continental Maritime of San Diego Management Team is committed to providing the necessary structure, tools, and environment for our employees. We act in the economic best interests of our customers and our company, in a professional, honest and sincere manner. Our mission is accomplished through unwavering commitment to the following principles: • Teamwork, • Professional Conduct, • Integrity, • Total Quality, • Customer Satisfaction, • Open, honest communication at all levels, • Awareness of environmental issues Apply in person to: Continental Maritime of San Diego, LLC 1995 Bay Front Street, San Diego, CA 92113 Apply online:

Description: Position Summary: The RT Vent Field Clinician is a Respiratory Therapist providing respiratory patient care to Vent patients for optimal outcomes. Provides respiratory care to patients in alternate sites in accordance with AdaptHealth’s policies and procedures. Respiratory care will be preventative, rehabilitative, and palliative in nature. The RT will utilize all the resources available within the agency and community to accomplish care objectives. This position will provide education and care to the patient and communicate with team, physicians and referral sources and other patient agencies ensuring prompt attention to patient care issues. Essential Functions and Job Responsibilities: • Utilizes various sources of information to attain greater competence about his or her position, including attending educational events (including attending optional in-services) and asking questions., • Utilizes acquired knowledge to increase his or her competencies., • Consistently demonstrates ability to adequately complete all documentation and charting procedures in compliance with company policy and procedures., • Maintains complete and accurate patient files by updating all documents per company policy and procedures., • Reviews Plan of Treatments and Care Plans to assure they are accurate and up to date., • Documents procedures including how the patient tolerated a procedure, side effects and other pertinent information., • Assists with authorization for Ventilator referrals for patients., • Shows adequate knowledge of respiratory equipment and displays ability to utilize knowledge in the clinical setting., • Displays knowledge of assessment skills and demonstrates application of clinical skills during set-ups, follow-ups, and in-services., • Participates in discharge planning of highly technical cases., • Performs clinical assessments as needed and reports results and recommendations to the referral and physician., • Participates in highly technical discharges and prepares in advance to assure the patient and caregivers have a smooth transition to the home setting., • Performs in-services to hospital staff, referrals, other professionals regarding equipment & issues of clinical nature., • Follows up with physician and referrals regarding patient status and documents accurately and in a timely manner., • Retain knowledge of and consistently adhere to procedures for the use of Personal Protective Equipment (PPE), infection control and hazardous materials handling., • Works to promote AdaptHealth by new program development, operational backup, personal visits, coordination of educational activities, etc., • Assume on-call responsibilities during non-business hours in accordance with company policy., • Uses clinical expertise in evaluating vent patients records once a ventilator set up has been completed by the branch Respiratory Therapist., • Ensures accuracy of prescriptions and plan of care was followed and documented. Also reviews delivery tickets, home inspection, ventilator check, and patient equipment competencies are complete and documented., • Maintains proficient knowledge of ventilator patients including compliance software, new technology, units, and supplies supported by Adapthealth., • Ability to demonstrate and instruct on use of vent units and supplies. Ability to make decisions for patients based on compliance data and assessment., • Communicates with team, physicians and referral sources and other patient agencies ensuring prompt attention to patient care issues., • Maintains working knowledge of Medicare/Medicaid and other third-party payer guidelines related to ventilation., • Electronically documents patient care activity, intervention provided and all communication regarding the patient. Documentation is accurate, complete and follows company standards., • Appropriate steps taken to ensure recommendations and orders sent are acknowledged and followed up in a timely manner., • Responsible for accuracy, clarity, and timeliness of verbal and written communications as it relates to role., • Responsible for documentation that supports data collection to track and trend outcomes., • Assists in establishing clinical documentation when needed for third party reimbursement or justification., • Uses knowledge in working with referral sources to educate about best practice standards., • Works collaboratively and pro-actively with peers and other team members to resolve issues and assure optimum outcomes for patients, referral sources and staff., • Acts as a resource on practices and processes to provide appropriate guidance., • Develop and maintain working knowledge of current HME products and services offered by the company., • Maintain patient confidentiality and function within the guidelines of HIPAA., • Completes assigned compliance training and other educational programs as required., • Maintains compliant with AdaptHealth’s Compliance Program., • Experience with ventilator patients, • Competent in Ventilator, Airway Clearance, and Oxygen therapy administration and management, • Able to perform clinical assessments., • Equipment troubleshooting and maintenance skills., • Decision making skills., • Expert communication and interpersonal skills, • Ability to prioritize tasks and manage multiple projects., • Strong analytical and problem-solving skills with attention to detail, • Proficient use of Microsoft Office Suite – Excel, Word, and PowerPoint, • Solid ability to learn new technologies and possess the technical aptitude required to understand flow of data through systems as well as system interaction., • Knowledge of the regulatory requirements at the state, federal, and local level, • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form., • Associates degree from an AMA approved respiratory program,, • Valid and unrestricted RT clinical license in all states serviced by the branch., • Must be CPR certified,, • One (1) year of clinical experience as a Health Care RT, HME RT or clinical nursing with Vent experience., • Must be able to lift 50 pounds, stand, bend, stoop, and be able to sit at a computer for extended periods of time., • Must be able to perform one-man CPR., • Ability to perform repetitive movements of the upper extremities’ motions of wrists, hands, and/or fingers due to extensive computer use., • May be exposed to unsanitary conditions in some home settings., • Work environment may be stressful at times, as overall office activities and work levels fluctuate., • May be exposed to high crime areas within the service community., • Subject to long periods of sitting and exposure to computer screen., • May be exposed to hazardous materials, loud noise, extreme heat/cold, direct, or indirect contact with airborne, bloodborne, and/or other potentially infectious pathogen., • May be exposed to angry or irate customers or patients., • Must be able to drive and travel as needed., • Physical and mental ability to provide clinical assessments., • Requires travel throughout service area., • Mental ability to communicate both verbally and in writing., • Must be able to access the patient’s residence., • Ability to work outside of normal business hours., • Physical and mental ability to provide clinical assessments. PI8d412b18f2c2-37820-38558120

Job Description To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The qualifications listed below are representative of the knowledge, skill, and/or ability desired. The individual must have working knowledge of procedures, strong mechanical aptitude and ability, and be able to follow directions. The individual must possess experience in the trade; knowledge of ship terminology, blueprint reading, job specifications and manuals. Must be able to follow directions and work with limited supervision. Must be willing to work with and train subordinates. SAFETY Must comply with Company safety rules and OSHA standards. Must be physically and medically qualified to wear required personal protective equipment as prescribed under OSHA standards. ESSENTIAL QUALIFICATIONS, DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Technically proficient in tasks, work processes, and equipment operation. Accountable for completion of daily work assignments including the completion and signatures for work completion and quality. Creates a working environment for compliant with quality, safety, environmental, and health regulations and policies. Thorough knowledge of equipment used in rigging operations, included but not limited to lifting and moving equipment. Knowledge of rigging testing requirements, proper set up and operation of equipment. Selects cables, pulleys, winches, blocks, and sheaves, according to weight and size of load to be moved. Attaches pulley and blocks to fixed overhead structures such as beams and ceilings with bolts and clamps. Attaches load with lifting devices such as wires, nylon straps and chains to crane hook. Gives directions to crane operator engaged in hoisting and moving loads to ensure safety of workers and material handled. Sets up cranes hoisting equipment. Safe handling of anchors and chains. Lowers, handles and tests lifeboats. Tests ships cranes using various rigging. Ability to interpret all crane load charts and blueprints. Ability to work any assigned shift and ability to work assigned overtime. May be assigned tasks outside craft as required. Must comply with the Company’s “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be business like and free of bias, prejudice, and harassment EDUCATION and/or EXPERIENCE Must complete practical demonstration of skills listed above. LANGUAGE SKILLS Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations before customers, clients, or employees of organization. MATHEMATICAL SKILLS The ability to add, subtract, multiply, and divide all units of measure, whole numbers, common fractions, and decimals in U.S. and metric conversions. REASONING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems that may arise in certain situations. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. Specific requirements include the following: 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Demonstrate the ability to bend, squat crouch, crawl and kneel., 4. Demonstrate the ability to climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Perform prolonged standing (2-3 hours)., 6. Able to work at a variety of levels (ex. Waist, eye, above head)., 7. Demonstrate the ability to safely and appropriately use required tools and equipment., 8. Demonstrate good balance while working on uneven surfaces and maneuvering obstacles., 9. Posses sufficient handgrip and coordination to carry and operate tools and equipment., 10. Ability to utilize personal protective equipment (hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards., 11. Ability to withstand extreme temperatures (cold and hot)., 12. Ability to enter 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 13. Able to respond to verbal and audible sounds/commands., 14. Able to utilize adequate visual skills., 15. Ability to work at heights above 12’ while working from ladders, scaffolding and/or manlifts., 16. Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 17. Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers. 18. Ability to turn head from side to side and about on the vertical axis., 18. Ability to turn body at the waist from side to side and about the vertical axis. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the environment varies from normal office environment to wet and/or humid conditions, outside weather conditions, extreme cold, and extreme heat. The employee is occasionally exposed to moving mechanical parts and high places. The noise level in the shipyard environment is usually loud; office environment is usually low to moderate. The wearing of appropriate personal protective equipment mitigates risks associated with these conditions and is mandatory. 1st Shift 40 Hours a week / OT with approval Comments for Suppliers:

Job DescriptionDescription: POSITION SUMMARY The Tower Technician works with cell phone towers to provide wireless communications services. A Tower Technician may assist in setting support infrastructure to build towers from the ground up. They also conduct routine maintenance while also installing more delicate equipment antennas, lighting at the top of the towers which requires additional education, experience, and training. When at the telecom job sites, the focus is always on efficiency, quality, and safety. Responsibilities and Duties: As a Tower Technician the duties include, but are not limited to the following: • Participate in pre-project meetings and complete all required paperwork, • Assess safety hazards and ensure all work is performed following all safety rules and regulations, • Effectively work with and support fellow crew members crew members, • Successful completion of all scope of work assigned according to construction requirements and quality standards, and within the time frame allotted, • Provide troubleshooting and support for integration tasks, • Perform administrative tasks as required including timesheet submittals, daily reports, expense reports, materials list, etc., • Participate in punch-walks and submit close out package information, • Take responsibility and care for all company equipment, vehicles, and tools, • Ability to work with advanced hand/power tools and alignment tools, • Ability to work under pressure and meet deadlines, while maintaining a positive attitude, • Ability to work independently and to carry out assignments to completion within parameters of instructions given, prescribed routines, and standard best practices, • Basic computer skills, • Must be RF Awareness, CPR/FIRST AID, OSHA 10, Comtrain (or equivalent) certified, • Must be able to travel away from home for 3 - 6 weeks at a time, • Valid Driver’s License with a clean driving record, • Must have basic hand tools, full climbing gear, boots, work clothes, PPE, • Experience with all major carriers (TMOBILE, Verizon, AT&T), • NWSA TT1, TT2, • Rigging, • Knowledge and experience using test Equipment, ODM, PIM, Anritsu, OTDR, • Ability to read SA and other paperwork, • $19-$30/hour BOE, • Excellent health care benefits including medical, dental, vision and several supplemental offerings, • Company paid life insurance up to 1x annual salary, STD and LTD, • Must be able to climb and work on the towers, poles, buildings (no fear of heights), • Must be able to lift and carry at least 70 pounds, • Must be able to perform the essential job functions safely and successfully, • Must be able to work in inclement weather (snow, rain, heat, high winds, etc.), long hours and variety of shifts (including night work), • Must be able to pass ongoing drug screen testing

Job Description Labor One is hiring Firewatch for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for fire prevention and fire protection at the assigned work site. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Comprehend basic instructions and general correspondence., 2. Be able to clearly communicate verbally to warn others of fire or other danger., 3. Understand the hazards associated with fixed and portable fire protection systems and the manner in which the systems are activated., 4. Understanding of proper use and care of fixed and portable fire protection systems., 5. Understand the Shipyard Competent Person Report, and where to find it., 6. Know the types of fire, the materials involved, and the type of fire extinguisher needed to suppress the fire., 7. Possess a Fire Watch training card., 8. Be able to wear clothing appropriate for the task. No exposed jewelry shall be worn while working. Finger nails shall be short. Long hair shall be worn in pony tail or wrapped for protection and should not interfere with hard hat. Ability to wear PPE, especially respirators. DUTIES AND RESPONSIBILITIES 1. Have Fire Watch Training card with them at all times in the shipyard., 2. Carry out Fire Watch procedures to protect personnel and customer and BAE property from fire damage., 3. Ensure that designated hot work area is clean and free of combustible materials before hot work commences., 4. Keep your work area clean and safe at all times, especially at the end of the shift., 5. Warn other personnel of danger, or to evacuate, by verbal or other prearranged method of communication., 6. Show initiative and ownership of work and work area., 7. Adhere to all safety rules and good work ethics. Be accountable for completion of work assignments., 8. Arrive at the designated work site at the assigned time. End the shift as directed by the schedule and your supervisor or journeyman., 9. Work shifts and overtime as assigned the supervisor., 10. Comply with OSHA standards and the shipyards best safety practices. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 11. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. Work Tasks Include: a) Ensure that designated hot work area is clean and free of combustible materials before hot work is started. b) Carry an appropriately rated fire extinguisher to the assigned watch area. Make certain the fire extinguisher is in operable shape and not discharged prior to allowing hot work to start. c) Notify the person accomplishing the hot work if it is safe to proceed and when there is danger. d) Suppress fires when they occur. e) Report any uncorrected unsafe condition or working habits to the journeyman and supervisor. f) Assist with the hot work procedure and audits process making certain hot work notifications are in place and valid before hot work commences. WORK ENVIRONMENT -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: -The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. -While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS INCLUDE: (May be required to demonstrate any or all requirements.) 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 - 30 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head). 6. Good balance while working on uneven surfaces and maneuvering obstacles., 6. Sufficient handgrip and coordination to carry and operate tools and equipment., 7. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 8. Respond to visual, verbal, and audible sounds/commands., 9. Work at heights above 12' from ladders, scaffolding, and manlifts., 10. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 11. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 12. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 1st Shift 40 hours per week; Overtime with supervisor approval. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job DescriptionJOB DESCRIPTION Employment Type: Full Time/Hourly/Non-Exempt Salary Information: $23.97 - $34.24/Hourly Who We Are Continental Maritime of San Diego, a Titan company, is a certified Master Ship Repair Contractor for the U.S. Navy. Our skilled professionals have performed hundreds of ship repairs for the Navy and Military Sealift Command. CMSD does repair on all types of major surface vessels including CVN, CG, and DDG, and all types of amphibious ships including LHD, LHA, LSD, LPD, and auxiliary ships. Our work also includes repairs and alterations to a wide range of Combatant, Hull, Mechanical and Electrical, and Habitability Systems. Position Specifics Continental Maritime of San Diego is currently seeking an Outside Machinist 4 to help support our operations. The Outside Machinist 4 is responsible for the overhaul, alignment, and adjustment of machinery equipment in place onboard ship; cut, shape, and drill various materials; assemble and disassemble mechanical parts according to technical manuals; clean and preserve parts; perform related tasks as assigned, some of which may become essential to the position. Minimum Requirements • Working knowledge of ship layout, • Trained in machine shop equipment, alignment process, and blueprint reading, • Ability to use hand tools and measuring devices, • Ability to work at heights and in confined spaces, • Must be able to access and move around ship safely, • Ability to read and comprehend technical manuals, • A minimum of 4 years of relevant experience in required, • Most work is performed aboard ships or in industrial conditions. Shop, shipboard, warehouse, industrial environment, • May be exposed to fumes and irritants including welding/burning fumes, paints, oils, greases and various cleaning solutions and solvents, noise, high heat and humidity hazards while wearing the required Personal Protective Equipment (PPE), • Frequently moves throughout the shipyard, • Works at heights and in confined spaces, • Must be able to ascend/descend stairs/ladders/ramps, aboard ships in shipyards under industrial conditions and in confined spaces, • Must be able to move heavy equipment and boxes, weighing up to 50 pounds, • May be exposed to rapid changes in microclimates, industrial processes, and other environmental factors while collecting data, providing direction, and observing performance of task teams The Continental Maritime of San Diego Management Team is committed to providing the necessary structure, tools, and environment for our employees. We act in the economic best interests of our customers and our company, in a professional, honest and sincere manner. Our mission is accomplished through unwavering commitment to the following principles: • Teamwork, • Professional Conduct, • Integrity, • Total Quality, • Customer Satisfaction, • Open, honest communication at all levels, • Awareness of environmental issues Apply in person to: Continental Maritime of San Diego, LLC 1995 Bay Front Street, San Diego, CA 92113 Apply online:

Job Description Labor One is hiring Insulator Helpers for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for performing the installation and removal of insulation of any component onboard ships. A Helper works under the guidance of an Improver, Journeyman, and Supervisor to measure, cuts and fabricates materials for insulation application to bulkheads, overheads, piping, ducts, machinery, and equipment to minimize heat transfer, prevent moisture condensation, and to deaden sound. Work is accomplished in all phases of ship repair and modernization of maritime vessels including US Naval Vessels, Military Sealift Command, and commercial ships and barges. The position requires a basic knowledge of procedures and the insulation craft, and the drive to accomplish quality work and learn. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Musty have a basic understanding of ship repair terminology and ship compartment location nomenclature., 3. Must be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to write a report for the supervisor or journeyman describing the material condition of the ship as it pertains to the assigned work item., 5. Must be able to effectively confer job related information to the improver, journeyman, and supervisor., 6. Must have experience using hand and power tools associated with the trade in a safe manner., 7. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system., 8. Two (2) years of related experience, some of which must be in the maritime environment. DUTIES AND RESPONSIBILITIES 1. Must comply with OSHA standards and the shipyards best safety practices., 2. Must arrive at the designated work site at the assigned time and end the shift as directed by the supervisor., 3. Work shifts and overtime as assigned., 4. Must keep the work area clean and safe at all times, especially at the end of the shift., 5. Must follow the direction provided by the supervisor, improver, and journeyman., 6. Complete daily work assignments and provide status of unfinished work., 7. Use appropriate sections of NAVSEA, ABS, Coast Guard standards and manufacturer's tech manuals required to accomplish the insulation task., 8. Assist with providing Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 10. Carry out instructions furnished in written, oral, or diagram form. Work with the supervisor, journeyman, and Improver to resolve, in a professional manner, unexpected events related to your assigned task. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel. 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 4. Work at a variety of levels and positions (ex. Waist, eye, above head)., 5. Good balance while working on uneven surfaces and maneuvering obstacles., 6. Sufficient handgrip and coordination to carry and operate tools and equipment., 7. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 8. Respond to visual, verbal, and audible sounds/commands., 9. Work at heights above 12' from ladders, scaffolding, and manlifts., 10. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 11. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 12. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd shift 40 hours a week; overtime with supervisors approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Laborers for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for supporting mechanics in the accomplishing of production tasks, including the use of small mechanical and hand tools. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Comprehend basic instructions and general correspondence., 2. Be able to clearly communicate verbally to warn others of fire or other danger., 3. Possess the skills required of a Fire Watch., 4. Have experience using small power tools and hand tools in a production environment., 5. Be able to wear clothing appropriate for the task. No exposed jewelry shall be worn while working. Finger nails shall be short. Long hair shall be worn in pony tail or wrapped for protection and should not interfere with hard hat. Ability to wear PPE, especially respirators. DUTIES AND RESPONSIBILITIES 1. Arrive at the designated work site at the assigned time. End the shift as directed by the schedule and your supervisor or mechanic., 2. Work shifts and overtime as assigned the supervisor., 3. Comply with OSHA standards and the shipyards best safety practices. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 5. If assigned as a fire watch, carry out the duties of a fire watch as delineated in the Fire Watch Labor Category including having a fire watch training card at the work site at all times., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Warn other personnel of danger, or to evacuate, by verbal or other prearranged method of communication. WORK ENVIRONMENT -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. -----The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: -The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. -While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS INCLUDE: (May be required to demonstrate any or all requirements.) 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 - 30 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers. 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. work under the guidance of the Crane Operator and Tender. 1st Shift 40 Hours a week / OT on approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Firewatch for a shipyard in San Diego, California. Please contact our team for more information! Cell: (619)657-5507 or (858)717-1672 • Please send us a text if we don't answer* Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM Job Summary • Observes for sparks and flames during welding and works as a laborer to assist trades; sweeps, hoses and performs tasks related to clean up on-board ship, in drydock, on piers and throughout the shipyard., • Performs other related tasks as assigned, some of which may become essential to the position. Qualification Standards • High school graduate or GED with prior experience preferred., • Ability to read and write (in English) and understand verbal instructions required., • Requires observation skills, ability to respond quickly, housekeeping skills, good judgement and on-going safety awareness., • Must be able to access and move around ship safely, work at heights and in confined areas with limited visibility., • Must be clean shaven for respirator fit (modest mustache is fine). Essential Job Tasks • Assists in setting up equipment, including helping the welder running leads, hoses, operation of air an electric power tools; moves metal pieces for re-fitting; removes scrap from work area., • Moves fire bottle to areas of work; observes for sparks from welding and grinding;extinguishes fire when necessary., • Maintains a clean, hazard-free work area., • Sorts, inspects and stacks lumber and metal scaffold components. Materials, Tools Equipment, Work Aids Fire retardant material, hoses, leads, cleaning equipment and supplies, lights, fire bottle. Metal, wood, scaffold sub-section, bolts, clips, hand tools, cable lines and rope lines. Physical/Mental Involvement Lifting/carrying of objects weighing up to 50 lbs.; standing, walking, climbing/balancing, pushing/pulling, kneeling, crawling, stooping, crouching, reaching, handling, fingering, eye/hand/foot coordination, seeing, hearing and speaking. Understanding written and verbal directions, recognizing and avoiding potential safety hazards, following established procedures. Marginal Job Tasks None identified. Environmental Factors Works 50% of the time inside, 50% outside, on board ship, drydock, balanced on scaffolding in shipyard. Exposed to wind, heat, constant wet and humid conditions, vibrations; works near constantly moving machinery, mechanical parts and traffic from other trades. Exposed to fumes, odors, dust, toxic or caustic chemicals. Exposed to constant loud machinery noise. Labor One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Journey-Level Insulators for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for performing, with minimal supervision, the installation and removal of insulation of any component onboard ships. A journeyman measures, cuts and fabricates materials for insulation application to bulkheads, overheads, piping, ducts, machinery, and equipment to minimize heat transfer, prevent moisture condensation, and to deaden sound. Wok is accomplished in all phases of ship repair and modernization of maritime vessels including US Naval Vessels, Military Sealift Command, and commercial ships and barges. The position requires a working knowledge of procedures, comprehensive knowledge of the insulation craft and the drive to accomplish quality work on schedule. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Musty have a comprehensive understanding of ship repair terminology and ship compartment location nomenclature., 3. Must be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to write Condition Found Reports (CFR) describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action., 5. Must be able to effectively confer job related information to the supervisor, improvers, and helper., 6. Must have experience applying hullboard, Armaflex, Cal-sil, ventilation insulation, and insulation pads., 7. Must have experience fabricating insulation pads., 8. Must have experience using hand and power tools associated with the trade in a safe manner., 9. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system., 10. Must possess a basic understanding of the metric system., 11. Six (6) years of related experience, three (3) of which must be in the maritime environment. DUTIES AND RESPONSIBILITIES 1. Must comply with OSHA standards and the shipyards best safety practices., 2. Must arrive at the designated work site at the assigned time and end the shift as directed by the supervisor., 3. Work shifts and overtime as assigned., 4. Must keeping the work area clean and safe at all times, especially at the end of the shift., 5. Understand relevant work processes, operation of equipment, and complete tasks proficiently., 6. Complete daily work assignments and provide status of unfinished work for shift turnover., 7. Use appropriate sections of NAVSEA, ABS, Coast Guard standards and manufacturer's tech manuals required to accomplish the insulation task., 8. Provide guidance to Improvers and Helpers., 9. Provide Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 10. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 11. Carry out instructions furnished in written, oral, or diagram form. Resolve unexpected events related to your assigned task in a professional manner. WORK ENVIRONMENT -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. -----The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift 40 Hrs per Week OT per hiring Managers approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Firewatch for a shipyard in San Diego, California. Please contact our team for more information! Cell: (619)657-5507 , (858)717-1672, or (619)484-7267 • Please send us a text if we don't answer* Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM Job Summary • Observes for sparks and flames during welding and works as a laborer to assist trades; sweeps, hoses and performs tasks related to clean up on-board ship, in drydock, on piers and throughout the shipyard., • Performs other related tasks as assigned, some of which may become essential to the position. Qualification Standards • High school graduate or GED with prior experience preferred., • Ability to read and write (in English) and understand verbal instructions required., • Requires observation skills, ability to respond quickly, housekeeping skills, good judgement and on-going safety awareness., • Must be able to access and move around ship safely, work at heights and in confined areas with limited visibility., • Must be clean shaven for respirator fit (modest mustache is fine). Essential Job Tasks • Assists in setting up equipment, including helping the welder running leads, hoses, operation of air an electric power tools; moves metal pieces for re-fitting; removes scrap from work area., • Moves fire bottle to areas of work; observes for sparks from welding and grinding;extinguishes fire when necessary., • Maintains a clean, hazard-free work area., • Sorts, inspects and stacks lumber and metal scaffold components. Materials, Tools Equipment, Work Aids Fire retardant material, hoses, leads, cleaning equipment and supplies, lights, fire bottle. Metal, wood, scaffold sub-section, bolts, clips, hand tools, cable lines and rope lines. Physical/Mental Involvement Lifting/carrying of objects weighing up to 50 lbs.; standing, walking, climbing/balancing, pushing/pulling, kneeling, crawling, stooping, crouching, reaching, handling, fingering, eye/hand/foot coordination, seeing, hearing and speaking. Understanding written and verbal directions, recognizing and avoiding potential safety hazards, following established procedures. Marginal Job Tasks None identified. Environmental Factors Works 50% of the time inside, 50% outside, on board ship, drydock, balanced on scaffolding in shipyard. Exposed to wind, heat, constant wet and humid conditions, vibrations; works near constantly moving machinery, mechanical parts and traffic from other trades. Exposed to fumes, odors, dust, toxic or caustic chemicals. Exposed to constant loud machinery noise. Labor One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Requisition Number: 25582 Required Travel: 0 - 10% Employment Type: Full Time/Hourly/Non-Exempt Anticipated Salary Range: $54,755.00 - $67,662.40 Security Clearance: Ability to Obtain Level of Experience: Mid Meet HII's Mission Technologies Division Our team of more than 7,000 professionals worldwide delivers all-domain expertise and advanced technologies in service of mission partners across the globe. Mission Technologies is leading the next evolution of national defense - the data evolution - by accelerating a breadth of national security solutions for government and commercial customers. Our capabilities range from C5ISR, AI and Big Data, cyber operations and synthetic training environments to fleet sustainment, environmental remediation and the largest family of unmanned underwater vehicles in every class. Find the role that's right for you. Apply today. We look forward to meeting you. To learn more about Mission Technologies, click here for a short video: Summary For over a century, HII has built and maintained the U.S. Navy's most powerful warships. Join us as we continue to maintain the Navy's readiness! We are seeking a Journeyman level Marine Welder to provide support at South West Regional Maintenance Center (SWRMC) Product Family located in San Diego, CA. This Journeyman Welder will be responsible for welding tasks, provide structural and non-structural welding services in-shop and aboard ships. This includes hot work operations, component repair, fabrication and metal forming, pipefitting, and ship-fitting. Welder will also perform accommodation ladder/ship's gangway disassembly, assessment, and component repair to support U.S. Navy operations in San Diego, CA. What You Will Do • Conduct in-shop and on-board welding, including structural and non-structural tasks, hot work, and fabrication., • Repair and maintain accommodation ladders and ship's gangways to support U.S. Navy operations., • Responsible for interfacing with customers, managing subcontractors and ability to provide work direction to others., • May provide direction and lead others and May manage one or more multiple jobs., • Completes comprehension of specialty trades functions and tools. Performs a variety of complicated and non-routine tasks., • Develops and uses technical documents including controlled work packages, formal work processes and procedures, test documents, reports and task or trip reports. Schedules, reports and briefs customers and senior management., • May perform quality inspections on finished product. Performs duties outside of specialty in order to complete installation or work assignment.\n What You Must Have • High School education, or Trade School or equivalent, and 6 years of related experience., • Must have at least 6 years of experience with pipe bender, universal iron worker, plate shear, portable plasma cutter, oxygen/acetylene torch, drill press, horizontal band saw, vertical band saw, pipe notcher, finger brake, disc/belt sander, operated various GTAW/SMAW/GMAW welding machines, slip roll forming/bending machine, and portable electrical, pneumatic, and hand tools., • Must provide own hand tools as designated per trades specialty., • Must be able to obtain and maintain CAC ID base access and DoD Secret Security Clearance., • Must be able to obtain and maintain welding qualifications per the following list within ninety (90) calendar days of starting:, • GMAW aluminum plate 5356 in the vertical/horizontal/overhead positions., • SMAW steel plate 11018 in the vertical/horizontal/overhead positions., • GTAW aluminum plate 5356 in the vertical/horizontal/overhead positions., • GTAW 2-1/2" steel pipe 70S2 and RN-82 in the 6G position., • SMAW steel plate 8N12 in the vertical/horizontal/overhead positions., • As required by assignment: Grade III and Grade V Brazing in the vertical/horizontal positions, to include face-feed and insert type fittings., • Must be able to complete training and ceritifications within ninety (90) calendar days of starting:, • OHSA 10hrs, • CPR, • Fall protection training, • Low speed vehicle training (operation of carts), • PQS 301 Craftman qualification, • May be required to obtain forklift license depending on shop need., • Must obtain and maintain Marine Chemist Certification., • Start date contingent upon approval of base access which is required for this position and continued employment. \n Preferred: Bonus Points For • A current, valid DoD confidential clearance or higher., • MIG, TIG, ARC Welder and Brazing certifications. \n Physical Requirements Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces. Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels. May ride ships at sea for extended periods. May require wearing a respirator. Travel may be required within and outside of the continental United States. HII is more than a job - it's an opportunity to build a new future. We offer competitive benefits such as best-in-class medical, dental and vision plan choices; wellness resources; employee assistance programs; Savings Plan Options (401(k)); financial planning tools, life insurance; employee discounts; paid holidays and paid time off; tuition reimbursement; as well as early childhood and post-secondary education scholarships. Bonus/other non-recurrent compensation is occasionally offered for qualified positions, and if applicable to this role will be addressed by the recruiter at the screening phase of application. The listed salary range for this role is intended as a good faith estimate based on the role's location, expectations, and responsibilities. When extending an offer, HII's Mission Technologies division takes a variety of factors into consideration which include, but are not limited to, the role's function and a candidate's education or training, work experience, and key skills. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. Our workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to [email protected] and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this email address. Additionally, you may also call 1-844-849-8463 for assistance. Press #3 for HII Mission Technologies.

Epsilon Systems Solutions, Inc. is seeking a full-time Welder I in National City, CA. Summary: This position welds metal components together to design specifications or repair products, such as machine parts, shipboard equipment, according to layouts, blueprints or work orders, using approved welding and brazing procedures with a variety of arc and gas welding equipment. Duties and Responsibilities: \n • Provides welding support certified in Gas Tungsten Arc Welding (TIG), Gas Metal Arc Welding (MIG) and Gas Metal Arc Welding Pulse (GMAW-P) using 5356 filler wire.\n, • Uses hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.\n, • Welds components in flat, vertical, or overhead positions.\n, • Ignites torches or starts power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.\n, • Clamps, holds, tack-welds, heat-bends, grinds or bolts component parts to obtain required configurations and positions for welding.\n, • Detects faulty operation of equipment or defective materials and notify supervisors.\n, • Operates manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, carbon arc, plasma arc, shielded metal arc, resistance welding, submerged arc welding and pipe welding.\n, • Ensures shop safety and housekeeping are followed\n, • Ensures all materials and equipment are properly and safely stored, protected, and maintained\n, • Reports the status and progress of all work to the government supervisor\n, • Alerts the government supervisor of the causes of work delays\n, • Monitors the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.\n, • Examines work pieces for defects and measure work pieces with straight edges or templates to ensure conformance with specifications.\n, • Recognizes, set ups, and operates hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.\n, • Lays out, positions, aligns, and secures parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.\n, • Performs welding methods using a mirror.\n, • High School diploma or equivalent\n, • Minimum 1 - 2 years' work-related experience\n, • Minimum 1 - 2 years' specific experience as a qualified production welder\n, • Ability to obtain and maintain access to military and government installations and private shipyards\n, • Ability to communicate verbally and electronically\n, • Ability to read schematics, follow detailed instructions and be self-motivated\n, • Ability to read, interpret, and follow detailed oral and written instructions, schematics or drawings and to conduct activities in a safe manner\n, • Ability to see details at close range (within a few feet of the observer)\n, • Ability to concentrate on a task over a period of time without being distracted\n, • Ability to qualify to approved welding and brazing procedures\n, • Ability to make decisions using sound judgment while complying with policies, procedure appropriate principles and applicable state and federal laws and regulations\n, • Familiar with a variety of the field's concepts, practices, and procedures\n, • Knowledge of Qualify Craftsman 301 for civilians\n, • Knowledge of machines and tools, including their designs, uses, repair, and maintenance\n, • Production welder experience while in the Navy or working as a civilian production welder supporting Navy ship repair or new construction\n, • Completion of a formal course of vocational or Navy welding training and certification\n\n The pay range for this is $19.75 to $28.75 per hour. This is a reasonable estimate for this role. Individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications such as skills, education and experience. ADA Notifications: \n • Requires walking, reaching, sitting and concentration in the presence of occasional and loud noises\n, • Able to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways, and up and down antenna masts/yardarms (onboard ships).\n, • Able to lift, carry and move objects up to 50 lbs. in weight.\n, • Must have manual and finger dexterity; able to grasp, manipulate, assemble small objects.\n, • Able to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.\n, • Able to perceive and distinguish normal range of colors.\n\n, • May be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots.\n Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Job Description Watermill Express is the national leader in refill kiosks that provide affordable, sustainable, safe drinking water and ice in a convenient drive-up format. The Maintenance Representative is experienced in the proper maintenance, repair, and support for the refill station structure, equipment, and surrounding property. Tasks include, but are not limited to general cleaning initiatives, plumbing work, painting, basic mechanical/electrical repairs and troubleshooting, as well as some basic refrigeration system maintenance. This position works independently, and you must take pride in your work. You are eligible for: • Company Vehicle. Drive home daily, • Starting hourly rate is $18.25, • No Cost Employee Only Medical + $900 employer paid Health Savings Account, • Dental and Vision plans, • 401(k) and Roth with Company Match, • 8 days of accrued Paid Time Off the first year. Accrue up to 26 days per year., • Follow safety guidelines and act in safe manner., • Demonstrate and support the company’s Code of Conduct., • Paint refill stations (walls, pedestals, doors, protective posts, roofs)., • Pressure wash refill stations., • Maintain landscape at refill stations., • Maintain and repair parking lot and refill stations., • Replace signage, decals, and banners as needed., • Perform basic maintenance, repair, and troubleshooting of refill stations per company standards., • Support and assist with construction / development efforts as needed., • Repair water only and water-ice units as needed, • Properly maintain and care for company vehicle, inventory and equipment, • Drive company vehicle to company locations/units throughout assigned area*, • Team player with positive attitude, • Ability to work required schedule, • Painting skills, • Use and maintenance of hand tools, • Acceptable work attendance to perform job, • Ability to lift 50 pounds, • Capable of climbing ladders, stooping, walking, standing, and bending, • Ability to work safely in limited space inside water only and water-ice units, • Ability to work in heat, • Ability to safely operate a motor vehicle, • High school diploma or equivalent Right to Work/E-Verify Powered by JazzHR PszsJHq7pu

Job Description Job Title: Roadway Worker In Charge (RWIC) Location: San Diego, CA Job Type: Full-Time and Part-Time FLSA Status: Hourly; Non-Exempt Reports To: District Manager Travel: Yes, travel is expected for this position (50% - 85% on average). Supervisory Responsibility: No Compensation: Negotiable, based on skills and experience. Company Profile: National Railroad Safety Services, Inc. (NRSS) is a certified DBE/WBE firm primarily focused on providing safety services to the railroad industry. NRSS is the most trusted name in the railroad industry for providing qualified field safety staff and safety training. To best serve the railroad industry, NRSS provides all of these services in the continental United States, Canada, and Mexico. NRSS has the proven ability and the proven safety record to handle any project. Find the safety you have been missing today! Job Description: National Railroad Safety Services, Inc. (NRSS) is seeking a Roadway Worker In Charge (RWIC) to support railroad flagging services for Class 1 Railroads, Regional Short Lines, Transit Systems, State DOT's, as well as Railroad Suppliers, Contractors, and Consultants alike. Required Education: High School Diploma or Equivalent. Required Experience: Minimum 2 years of experience with a Class 1 Railroad, Regional Short Line, Transit System, State DOT Rail Division, Railroad Supplier, Railroad Contractor, and/or Railroad Consultant; preferably within the Maintenance Of Way (MOW) Department. Key Success Factors: • Accountability: Accept full responsibility for self and contribution as a team member., • Adaptability & Flexibility: Ability to consider a variety of issues that exist in the work place and change from one task to another as necessary., • Analytical Thinking: Ability to analyze and synthesize information to understand issues, identify options, and support sound decision making., • Attention to Detail: Ability to work in a conscientious, consistent, thorough manner, and attend to details while pursuing quality when accomplishing tasks., • Communication: Ability to clearly convey information and ideas through a variety of media to employees/clients in a clear and succinct manner., • Customer Service Focus: Ability to provide service excellence to internal and/or external clients., • Decision Making: Ability to identify/understand issues, problems, opportunities and take appropriate action based on available facts, constraints, and probable consequences., • Initiative: Ability to identify what needs to be done and take action before being asked., • Innovativeness: Ability to devise new plans for quality excellence., • Knowledge: Ability to navigate various rulebooks and/or regulations and demonstrate mastery., • Organization: Ability to maintain materials and/or records in a clean and ordered manner., • Planning: Ability to plan and prioritize work load to manage time effectively and accomplish assigned tasks., • Stress Tolerance: Ability to maintain stable performance under pressure or opposition (such as time pressure or job ambiguity)., • Teamwork: Promote cooperation and commitment within a team environment to achieve goals and deliverables., • Proficient computer skills in basic email, phone, and text message applications., • Proficient computer skills in Android OS; on tablet & smart phone., • Proficient computer skills in Citrix Applications., • Strong oral and written communication skills., • Strong technical knowledge in Railroad Engineering, Railroad Design, Railroad Construction, and Safety., • High level of accuracy and attention to detail; well organized., • Demonstrated ability to develop and maintain strong client relationships., • Ability to travel for extended periods of time; sometimes month(s) at a time., • Provide jobsite coordination., • Provide clear and concise communication with Dispatchers, Train Crews, other Railroad Personnel, and/or Contractor personnel., • Provide clear, concise, and thorough job briefings with all personnel on each job site., • Enforce all Railroad, State, and Federal Policies., • Identify rule violations and resolve in accordance with Railroad, State, and Federal Policies., • Enforce Contractor training requirements., • Submit daily field reports detailing Contractor and/or Railroad activities. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Must be able to hear, speak, read, and write clearly in English., • Must be able to drive long distances and/or travel by other modes as necessary., • Must be able to stand for long periods of time and/or walk on level/uneven ground., • Must be able to see up close, distances, colors and have use of peripheral vision and depth perception., • Must be able to tolerate extreme heat/cold temperatures., • Must be able to tolerate dusty/noisy conditions., • Medical, Dental, Vision, Life Insurance, • Short Term, Long Term Disability Insurance, • Paid Vacation and Holidays Safety Commitment: All employees of all levels are to remain committed to safety at all times while employed at National Railroad Safety Services, Inc. (NRSS). As such, no job is so important and no service is so urgent that we may not take time to perform all work safely. Simply put, safety is our way of life. By placing safety first, we not only ensure the wellbeing of our employees, customers, and communities, but we hold true our commitment to being the leader in safety throughout the Railroad Industry. Closing Statement: National Railroad Safety Services, Inc. (NRSS) is an Equal Opportunity/Affirmative Action Employer. Any candidate selected for this position must be able to successfully pass pre-employment/recurrent background checks, drug/alcohol testing, and classroom training. Job Posted by ApplicantPro

Job DescriptionOverview Company Overview: Join Allied Universal® Facility Management and Janitorial Services! We're committed to delivering exceptional cleaning, landscaping, and restoration services for commercial facilities. Be part of a welcoming and collaborative team where innovation meets excellence. We offer steady, reliable work in janitorial management, full-time and part-time janitorial roles, maintenance, landscaping, and metal restoration. If you want to make a meaningful impact and build a lasting career, we have opportunities for you. Join us and grow with a leader in the industry! We offer a comprehensive benefits package that may include medical, dental, and vision coverage, life insurance, a retirement plan, employee assistance programs, company discounts, and other perks, depending on the position and eligibility. Job Description: Job Description Allied Universal Janitorial Services is seeking the position of Janitor. As a Janitor for Allied Universal Janitorial Services, you will be responsible for cleaning and servicing our client's property to keep it in the best shape possible. You will also assist patrons or customers in a friendly and engaging manner when requested to do so. Wage: $16.50 / hour Qualifications/Requirements • Be at least 18 years of age with high school diploma or equivalent for full time positions., • Certain positions may require successful completion of a background investigation and a drug screen in accordance with all federal, state, and local laws., • Effective communication skills with customer, patrons, and employees- assisting others in a friendly and engaging manner at all times., • Knowledge of cleaning chemicals and supplies., • Strong attention to detail and reliability on completing tasks that can be repetitive., • Able to:, • Work in various working conditions and environments such as cold weather, rain/snow or heat for extended periods., • Ability to operate various cleaning equipment and machinery including scrubbers, pressure washer, and carpet extractor., • Ability to climb ladders, stand or walk on various surfaces for long periods of time., • Ability to lift and carry items and/or machinery up to 50 pounds. If you have any questions regarding Equal Employment Opportunity, have difficulty using the online system and require an alternate method to apply, or require an accommodation at any time during the recruitment and/or employment process, please contact our local Human Resources department. To find an office near you, please visit: . Requisition ID 2025-1434826

Job Description Priority consideration deadline: Wednesday, August 6, 2025. Under the supervision of the Aztec Student Union Building Services Coordinator, the Aztec Student Union Building Services Mechanic is responsible for assisting with maintenance and upkeep for the Aztec Student Union, Aztec Lanes, Children's Center and Scripps Cottage. Duties include but are not limited to; assessment and repairs of building HVAC systems, electrical systems and plumbing systems. This person will also assist with general carpentry throughout the facilities and perform routine preventative maintenance on all systems and equipment. This person will be trained to identify and troubleshoot issues at the Aztec Lanes Bowling Center. This person is to become an integral member of a hard-working team that is comprised of both full-time and part-time staff within the Student Union and Children's Center. The candidate should possess the ability to work both independently and as a team member. The mechanic shall demonstrate the ability to work effectively with a diverse population of building occupants, guests and staff. ESSENTIAL DUTIES & RESPONSIBILITIES Primary Functions • Maintain electrical systems, plumbing systems and mechanical systems, • Conducts general carpentry which includes flooring repairs, cabinet repairs, painting, walls and ceilings, • Performs regular servicing and preventative maintenance procedures on all equipment, • Inspects and diagnoses deficiencies in equipment and/or operations, • Identifies replacement parts and supplies, prepares and then submits orders to Building Services Coordinator via FMX, • Assist with performing major rebuilds and overhauls of equipment as needed, • Frequently assists with operations and maintenance of Aztec Lanes pinsetters, • Maintains accurate records of parts, costs, and machine performance, • Assists in training part-time student staff on maintenance and repairs, • Performs emergency and scheduled repairs to buildings as required, • Ensures that facility/equipment repair and storage areas are neat, clean and orderly, • Conducts regular walk-throughs of the facilities and inspects equipment for normal operations and reports any issues to supervisor, • Ensures preventative maintenance is performed in a timely manner utilizing CMMS software, • Conducts all work with the first priority being safety for all building occupants in accordance with safety policies and the Injury and Illness Prevention Plan, • Attends and participates in staff meetings to ensure quality control and training, possess knowledge of current events and general information regarding the Student Union, the Children's Center and Associated Students, • Demonstrates a commitment to achieving the mission and values of the Student Union and the Associated Students, • Operates and controls the building automation using the Niagara system, • Attends and participates in required assigned training and course work, • Assists with other relevant mechanical and facility duties as assigned, • Assist in assuring the Facilities are following LEED O&M guidelines MINIMUM & PREFERRED QUALIFICATIONS: Education: • Must possess 2 years of equivalent experience in basic plumbing, electrical, HVAC and mechanical, • Must possess 2 years of equivalent experience in general carpentry, • Possess thorough knowledge of methods, tools, and equipment necessary for the repair, alteration, maintenance, installation and operation of equipment and the facility, • Experience utilizing a CMMS software preferred, • Must have knowledge of building, fire, OSHA, and life safety codes and regulations This is a regular, full-time, hourly position. Willingness to work a flexible schedule as necessary in order to respond to emergency/urgent situations is required. This may include working extended hours, evenings, weekends and some holidays. PERFORMANCE EXPECTATIONS: KNOWLEDGE, SKILLS & ABILITIES: Communication/Knowledge • Ability to operate personal computer, proficiency with Microsoft Office Suite (i.e. Word, Excel, PowerPoint) and ability to learn utilize new software programs, • Must have strong English language skills and the ability to read, write and verbally communicate at a level appropriate to the duties of the position, • Punctual and regular in attendance: arrive on time and ready for the workday, • Complete tasks satisfactorily, • Ability to prioritize workload, • Work effectively with other employees/departments, • Attention to detail and accuracy, • Guarantees equipment is in good working order for occupants, • Ensures each occupant encounter is courteous, respectful and efficient, • Develops and maintains positive working relationships with SDSU Facility Services staff Starting range: $23.96 - $26 per hour BENEFITS A.S. offers a wide variety of generous benefits that include: • 15 Holidays, • Vacation & Sick Leave, • Medical, Dental and Vision, • Flexible Spending Plans, • Employer Paid Life Insurance, • Employer Paid Long Term Disability, • Employer Paid Employee Assistance Programs, • Retirement Plans with Employer Contribution, • Aztec Recreation Center Membership WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work conditions may vary depending upon the location of job tasks required; may occur indoors and outdoors, therefore requiring exposure to a variety of elements. While working indoors, the lighting and temperature are adequate. The work environment may involve exposure to various elements including but not limited to: chemicals, dust, fumes, cold, heat, noise, vibrations and dampness. While working outdoors, the work environment may involve exposure to various elements including but not limited to: sun, heat/cold, dust, pollens and other environmental risks. Some work may include exposure to moderate to extreme noise, limited lighting in areas, exposure to moving mechanical parts and exposure to high, precarious locations. This position may also call for occasional business-related driving. A valid California Drivers' License and proof of automobile insurance is required. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Physical requirements include but are not limited to: walking, walking over rough or uneven surfaces, bending, stooping climbing, working in confined space, lifting, pushing, pulling and carrying loads. Physical demands may require lifting or moving items up to 50 pounds; must acquire assistance for items 75 pounds or greater. SPECIAL CHARACTERISTICS: • Must be professional and courteous at all times, • Must be able to work well with different work styles, • Must be able to work efficiently and show initiative, • Ability to provide excellent customer service and work well with all part-time and full-time staff, • Ability to take the initiative for additional projects and be self-motivated to initiate interactions with guests Inside the Organization: • Reports to the Aztec Student Union Building Services Coordinator, • Collaborates and works closely with Aztec Student Union Building Services Engineer and Student Building Services staff A background check (including a criminal records check) must be completed satisfactorily before any candidate can be offered a position with Associated Students. Failure to satisfactorily complete the background check may affect the application status of applicants or continued employment of current Associated Students employees who apply for the position. Fingerprinting is required for all employee and volunteer positions that have direct contact with minor children. SU 1114 Job Posted by ApplicantPro

Job DescriptionOverview Company Overview: Join Allied Universal® Facility Management and Janitorial Services! We're committed to delivering exceptional cleaning, landscaping, and restoration services for commercial facilities. Be part of a welcoming and collaborative team where innovation meets excellence. We offer steady, reliable work in janitorial management, full-time and part-time janitorial roles, maintenance, landscaping, and metal restoration. If you want to make a meaningful impact and build a lasting career, we have opportunities for you. Join us and grow with a leader in the industry! We offer a comprehensive benefits package that may include medical, dental, and vision coverage, life insurance, a retirement plan, employee assistance programs, company discounts, and other perks, depending on the position and eligibility. Job Description: Job Description Allied Universal Janitorial Services is seeking the position of Janitor. As a Janitor for Allied Universal Janitorial Services, you will be responsible for cleaning and servicing our client's property to keep it in the best shape possible. You will also assist patrons or customers in a friendly and engaging manner when requested to do so. Wage: $16.50 / hour Qualifications/Requirements • Be at least 18 years of age with high school diploma or equivalent for full time positions., • Certain positions may require successful completion of a background investigation and a drug screen in accordance with all federal, state, and local laws., • Effective communication skills with customer, patrons, and employees- assisting others in a friendly and engaging manner at all times., • Knowledge of cleaning chemicals and supplies., • Strong attention to detail and reliability on completing tasks that can be repetitive., • Able to:, • Work in various working conditions and environments such as cold weather, rain/snow or heat for extended periods., • Ability to operate various cleaning equipment and machinery including scrubbers, pressure washer, and carpet extractor., • Ability to climb ladders, stand or walk on various surfaces for long periods of time., • Ability to lift and carry items and/or machinery up to 50 pounds. If you have any questions regarding Equal Employment Opportunity, have difficulty using the online system and require an alternate method to apply, or require an accommodation at any time during the recruitment and/or employment process, please contact our local Human Resources department. To find an office near you, please visit: . Requisition ID 2025-1429314

Job Description As a valued member of our team, you will be working for our well-established, medium-sized construction materials company with multiple production plants throughout California. The Ready-Mix Driver is responsible for driving a truck equipped with a concrete mixer to deliver concrete mix to job sites. The role requires the driver to operate the truck in a safe and efficient manner, following and adhering to all applicable Federal & State laws. • Paid training is available for candidates that have a Class A or B license with air brake and tank endorsements. To qualify, you must be able to drive manual transmission trucks (no automatic restriction on your license)., • Starting pay is $31.00 per hour after paid training. BENEFITS:, • PPO/HMO Health Insurance, Medical, Dental, Vision, Life, • PTO (Paid Time Off), • 401k Retirement Plan, • Overtime pay, • Direct Deposit, • Training Program, • Strong Safety Program, • Employee Assistance Program, • Employee Referral BonusEssential Functions:, • Drive truck safely and timely to location for unloading., • Drive truck under loading hopper to receive sand, gravel, cement, and water and starts mixer., • Move levers on truck to release concrete down truck chute into wheelbarrow or other conveying container or directly into area to be poured with concrete., • Perform all duties assigned by management in a timely manner., • Perform pre-trip and post-trip inspections of truck and reports repairs to personnel., • Assemble, disassemble, lift, and carry chutes., • Clean truck after delivery to prevent concrete from hardening in mixer and on truck., • Maintain a clean vehicle, always cleaning it while on duty (spray surfaces of truck with water and protective compounds for cleaning purposes), on company time., • Monitor trucks and other company equipment to ensure appearance, safety, and proper maintenance levels., • Maintain accurate work and driving records of daily activities., • Assist in yard functions, lifting materials and operating yard equipment., • Able to communicate effectively with other staff., • Able to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals. This is a full-time position. Hours of work may vary at plant or other location. Not eligible for remote work. Must be available 6 days a week and to work overtime as job duties demand. Travel Required: Yes Preferred Education and Experience • Possession of a valid unrestricted California Commercial Driver License (Group A or B) and comply with Department of Transportation regulations., • Must have Air Brake and Tanker Endorsement and a safe driving record., • Knowledge of road construction materials, road construction processes and industry. requirements. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Physical Demands and Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts, hazardous chemicals, outside weather conditions and vibration. The employee is occasionally exposed to wet and/or humid conditions, high, precarious places, fumes or airborne particles, extreme heat and risk of electrical shock and elevated noise levels. Employees must wear the required personal protective equipment; up to and including safety vest, hard hat, e r protection, gloves, and safety glasses. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit for extended periods of time. The employee frequently is required to use hands to finger, handle or feel and reach with hands and arms. The employee is regularly required to stand, walk, climb, balance, stoop, kneel, crouch, crawl, talk or hear. The employee regularly assembles, disassembles, lifts, and carries chutes that can weigh up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Individual must be able to pass a pre-employment physical and drug screen. This Organization Participates in E-VerifyEsta Organizacion Participa en E-Verify Associated Ready Mixed Concrete is an EEO/AA (equal opportunity/affirmative action) company and does not discriminate on the basis of race, color, religion, religious creed, sex, sexual orientation, gender identity or expression, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, marital or familial status, military or veteran status, or any other characteristic protected by under federal, state or local law in the programs or activities which it operates. Associated Ready Mixed Concrete es una compañía EEO/AA (igualdad de oportunidades/acción afirmativa) y no discrimina por motivos de raza, color, religión, credo religioso, sexo, orientación sexual, identidad o expresión de género, origen nacional, ascendencia, edad, condición física odiscapacidad mental, condición médica, información genética, estado civil o familiar, estado militar o de veterano, o cualquier otra característica protegida por la ley federal, estatal o local en los programas o actividades que opera. #zr

Overview: The Director of Engineering provides direction and supervision to maintenance staff. Maintains building structure and systems including life safety systems, building automation systems, preventive maintenance systems, electrical, refrigeration, plumbing, heating, cooling, structural, ground care, parking areas and kitchen area etc. Provides community project management oversight and ensures a safe environment for residents, staff and visitors. Vi is recognized as a Great Place to Work and one of Glassdoor's 100 Best Companies to work for. Learn from the best and accelerate your career with Vi. What We Offer: • Competitive pay, • Exceptional benefits, • Generous Paid Time Off - start accruing on day one, • 401k with company match, • Paid maternity and paternity benefits, • Award-winning training and development, • Tuition Reimbursement, • Luxury work environment, • Meaningful and rewarding work Vi at La Jolla Village is located at 8515 Costa Verde Blvd, San Diego CA 92122 Responsibilities: • Member of community Cabinet team. Works collaboratively with Executive Director and Cabinet team to ensure success in meeting and exceeding community goals in operations, human resources, sales and resident care., • Responsible for oversight of the Maintenance staff, which includes hiring, training and development, counseling, performance evaluation, functional development and disciplinary action., • Oversees training of all staff on maintenance policies and procedures., • Trains newly hired Directors of Engineering in other communities as requested., • Advances the employee relations strategy to build the right work environment to increase employee engagement and remain “issue” and union free., • Increases personal growth and development through formal and informal education programs., • Evaluates and recommends staff and physical resources required for operations., • Works with residents and staff to ensure needs are met and work is completed in a timely manner., • Plans, implements and administers an effective preventative maintenance program in accordance with approved company procedures and engineering practices., • Develops action plans for achieving community objectives., • Manages community work orders and preventative maintenance programs., • Manages all distribution systems for electricity, water, steam, gas, etc., • Manages and / or completes daily chemical testing of the following areas: boiler, cooling tower, condensate return system, closed loops, open loops, pool and spa., • Manages, inspects and responds to alarms within the building automation system and fire life safety system., • Manages and operates air conditioning, heating, ventilation and refrigeration systems., • Keeps all charts and records pertaining to heat, light, power and costs of the facility., • Maintains interior/exterior building(s) and grounds., • Implements the energy management program. Develops and monitors quality assurance initiatives, conducts building inspections and oversees compliance with regulatory authorities such as OSHA, NFPA, ACHA and Life Safety., • Ensures regulatory required testing and documentation is completed., • Develops a community capital improvement plan., • Prepares Requests for Proposals, monitors and coordinates the services performed by outside contractors in accordance with all company approved contracts, leases, service agreements, and warranties., • Oversees capital projects and upgrades as requested., • Manages and/or participates in community Safety Committee., • Assists in developing the community Disaster Plan., • May be required to use vehicle to pick up parts and supplies., • Supports the employee survey process and partners with Director of Human Resources and Cabinet team to develop and execute subsequent improvement programs Qualifications:, • Education: High school diploma or G.E.D. equivalent is required. Associate Degree in related field or equivalent years of experience in the field is required. Bachelor’s degree is preferred., • Work Experience: Minimum 10 years of progressive experience in Maintenance Management is required. Must have at least 3 years in a supervisory position., • Licensure / Certification: Certified Hospitality Facilities Executive (CHFE) is preferred, or successfully pass the CHFE within 18 months of employment is required. Association of Facility Engineers (AFE) Plant Supervisor certification is preferred. Licensure in Heating/Air Conditioning and Refrigeration, Electrical, EPA and Plumbing is preferred. Must possess a valid and current driver’s license, where applicable. Pay Range: USD $122,747.00 - USD $150,000.00 /Yr.

Job Description Labor One is hiring Shipfitter Helpers for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description:This position is responsible for assisting with steel and aluminum structural work in all stages of repair and modernization of marine vessels including US Naval Vessels, Military Sealift Command, and commercial ships and barges while under the supervision of a supervisor and/or journeyman / 1st Class shipfitter. The position requires a basic understanding of structural repair procedures and a strong aptitude and ability to follow directions. The individual must possess knowledge of ship terminology, measurements, and the ability to read job specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Ability to comprehend instructions and general correspondence., 2. Working understanding of ship repair terminology and ship compartment location nomenclature., 3. Be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Ability to effectively communicate issues encountered during the job that are in conflict with the directions provided by the supervisor or journeyman / 1st class fitter., 5. Ability to read and interpret structural drawings, including weld symbols., 6. Basic understanding of hand and power tools used by shipfitters including but not limited to mauls, grinders, circular and reciprocating saws, and hand and magnetic drill., 7. Ability to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system., 8. Up to one (1) year of experience in a heavy industry. DUTIES AND RESPONSIBILITIES 1. Must comply with OSHA standards and shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor., 3. Work shifts and overtime as assigned., 4. Keeping the work area clean and safe at all times, especially at the end of the shift., 5. Understand relevant work processes, operation of equipment, before commencing work., 6. Complete daily work assignments and provide status of unfinished work to the journeyman or supervisor., 7. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment. 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 8. Respond to visual, verbal, and audible sounds/commands., 9. Work at heights above 12' from ladders, scaffolding, and manlifts., 10. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 11. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 12. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 1st Shift 40 Hrs per Week OT per hiring Managers approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description OUR CORE PILLARS: Safety | Operational Excellence | Shareholder Value Propulsion Controls Engineering has a job openings for Outside Machinist Journeyman, with a minimum 5 years of marine and/or shipyard experience preferred; at our San Diego, CA location. PCE is a full service electro-mechanical repair and diesel repair contractor. PCE has garnered a wealth of extensive experience in successfully executing major system overhauls across numerous ports throughout the world on virtually every class of ship currently in operation. Job Summary / Outside Machinist: Capable of accomplishing the installation, maintenance, and repair of ship's propulsion and auxiliary systems including, but not limited to Steam, Gas Turbine, and Diesel propulsion systems, rudders and steering gear, elevators, and deck equipment without Supervision. Capable of accomplishing the installation repair, and maintenance of ship's fluid systems which include pumps, compressors, purifiers, heat exchangers, actuators and valves without Supervision. Analyze defects and adjusts or repairs electrical mechanical systems of outboard motors. Disassembles and inspects motor for defective parts, using mechanical hand tools. Replaces parts like gears., magneto points, piston rings and spark plugs and reassembles engine. Capable of accomplishing the testing of equipment to ensure systems meet 4E specifications, references and drawings without Supervision. Capable of accomplishing the installation and testing of various shop equipment. Must have ability to follow repair references and drawings and be proficient in the use of precision measuring equipment. Performs other related tasks as assigned, some of which may become essential to the position. Job Requirements and Experience / Outside Machinist: • Must be 18 years of age or older to apply., • Minimum 5 years of marine and/or shipyard experience preferred., • Health Insurance (medical, dental, vision, company paid life insurance, voluntary plans such as supplemental life insurance, critical illness, and hospital indemnity), • Paid Time Off, • Company paid holidays, • Retirement savings plan (401(k) plan with company matching and an Employee Stock Ownership Plan OUTSIDE MACHINIST JOURNEYMAN EEO/AA/Vet/Disabled #zr Copyright © 2024, ADP, Inc. All rights reserved.Privacy|Legal|Requirements|Artificial IntelligencePowered by

Job Description The Distribution Associate I is responsible for all incoming and outgoing products and orders. This position requires the inspection of pallets to ensure the product matches the SKU number. This position ensures accuracy through diligent inventory management and reporting. The Distribution Associate I is required to follow proper invoicing and pick-up protocol and as well as safely assisting clients and shipping providers with loading their orders. Essential Functions Distribution Associate I To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be available to enable individuals with disabilities to perform the essential functions of the role. Essential functions for this role include but are not limited to the following. • Pick, Pack and Ship daily orders, • Maintain an organized, clean, and safe warehouse environment, • Manage inventory, conduct cycle counts, and assist with corporate inventory counts, • Report any inventory discrepancies to manager, • Assist with the unloading of containers, • Keep a safe and c lean environment in the warehouse at all times, • Maintain warehouse damage list and report to manager weekly, • Inspect forklifts and other warehouse equipment daily and report any issues to management, • Communicate with Order Management staff regarding any order discrepancies or issues, • Uphold all warehouse safety protocol and instruction, • Work cooperatively in a team environment, • Follow proper receiving procedures, including thorough product Quality Control (QC) inspections, • Maintain high level of customer service and professionalism at all times, • Rework and process returned inventory, • Multitask and prioritize work through effective time management, • Pull stock orders and site transfers and process in timely manner, • Work within the framework of the Company's defined policies, procedures, goals, and directives, • High school diploma or equivalent, • Prior warehouse experience is a plus, • Effective verbal and written communication skills in English, • Strong interpersonal skills, ability to interact well with direct and cross-functional team members, • Excellent internal and external customer service, • Ability to multi-task in a fast-paced environment, • Close attention to details and high level of accuracy, • Self-motivated and proactive, • Possess a flexible work schedule, • Familiar with Standard Operating Procedures (SOPs), Work Instructions (WIs), Good Manufacturing Practices (GMP), Good Documentation Practices (GDP), and ISO and FDA regulated environments. The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. Reasonable accommodations may be available to enable individuals with disabilities to perform the essential functions of the position. • Ability to regularly lift and move up 40 pounds to a 36-inch height, • Regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear, • Frequently required to climb , balance, and stand for long periods of time, • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus Work Environment While performing the responsibilities of the job, these work environment characteristics are representative of the environment the employee will encounter. Reasonable accommodations may be available to enable individuals with disabilities to perform the essential functions of the position. Possible exposure to moving mechanical parts and risk of electrical shock. Occasionally exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; outside weather conditions; cold; heat; and vibration. The noise level in the work environment is considered normal.

Company Overview: Allied Universal®, North America’s leading security and facility services company, offers rewarding careers that provide you a sense of purpose. While working in a dynamic, welcoming, and collaborative workplace, you will be part of a team that contributes to a culture that positively impacts the communities and customers we serve. We offer a comprehensive benefits package that may include medical, dental, and vision coverage, life insurance, a retirement plan, employee assistance programs, company discounts, and other perks, depending on the position and eligibility. Job Description: Pay Rate: $21.00/HR Full-Time Security Officer for a corporate building located in Mission Valley. Must have a California Guard Card and a California Driver's License for more than 1 year. Schedule: Wednesday - Sunday, 10 PM - 6 AM. This position is responsible for the safety and security of the facilities they protect. Our Critical Facility Officers allow us to accomplish our company’s core purpose which is “to service, secure and care for the people and businesses in our communities.” Critical Facility Security Officers act as a visible deterrent to crime and client rule infractions; they detect and report suspicious, unsafe or criminal acts at or near their assigned posts which may be a threat to the property, clients, guests or employees at the site. RESPONSIBILITIES: • Ensure the facility is provided with high quality security services to protect people and property., • Maintains proficiency in the use of all assigned protective equipment, restraint devices and weapons., • Report safety concern, security breaches and unusual circumstances both verbally and in writing., • Preserves order and acts to enforce regulations and directives for the site pertaining to personnel, visitors and premises., • Monitors closed circuit television systems and alarms; Reports safety concerns, security breaches and unusual circumstances both verbally and in writing., • Maintains awareness and familiarity with the site-specific operations performance manual and post orders., • Meets and continues to meet any applicable state, county and municipal licensing and permit requirements for Armed Security Officers and specific protective device and weapons qualifications., • Build, improve, and maintain effective relationships with both client employees and guests., • Answer questions and assist guests and employees; Answer phones or greet guests/ employees in a professional, welcoming manner., • Patrols the facility on foot or in a vehicle., • High school diploma or equivalent required; at least 21 years of age, • Licensing requirements are subject to state and/or local laws and regulations and may be required prior to employment, • Be able to obtain a valid Guard License as required in the state for which you are applying, maintain current active status of all required License at all times, and must carry the License at all times while on duty. We provide free training for any hires who do not possess a card/license., • As a condition of employment, candidate must successfully complete a background investigation and a post-offer/pre-employment drug/alcohol test and may be required to pass a Driver’s Record check., • Demonstrated ability to take initiative, successfully handle and prioritize multiple competing assignments and effectively manage deadlines., • Ability to handle both common and crisis situations at the client site, calmly and efficiently., • Professional, articulate and able to use good independent judgment and discretion., • Must possess effective oral and written communication and interpersonal skills., • Ability to successfully interact at all levels of personnel and the general public in a professional and effective manner, including with clients., • Have intermediate computer skills to operate innovative wireless technology at client specific sites., • Highly organized and ability to follow procedures concisely and consistently; high level of compliance and unwavering integrity to oversee and ensure policies are enforced in a self-directed environment., • Must be able to frequently prepare reports and read and understand all operating procedures and instructions., • Must possess one or more of the following:, • 3 years civilian law enforcement, • 3 years private or corporate security experience, • 3 years military experience with a positive discharge, • Criminal Justice Degree or law enforcement related degree, Associates or higher, • While performing the duties of this job, the employee is regularly required to use both hands, is frequently required to stand, sit, stoop, talk and hear (communicate verbally in person and via regular telephone equipment), and must be able to read computer screens, correspondence and reports in English., • The employee must constantly walk, stand, reach with both hands and arms, and must be able to drive a vehicle. The employee may occasionally maneuver up to 40 pounds. May be required to climb stairs on an intermittent basis at client sites., • Constant use of eyes (correctable vision to normal level required) to observe, read, interact with public and co-workers, view security monitors; includes hand/eye coordination., • Work in various environments including adverse outdoor conditions such as cold, rain or heat., • Must be able to focus and multi-task in a busy environment, with the ability to successfully handle stressful situations in a calm and professional manner. Includes being able to effectively manage multiple employees with diverse personalities and engage them to perform at optimum levels. If you have any questions regarding Equal Employment Opportunity, have difficulty using the online system and require an alternate method to apply, or require an accommodation at any time during the recruitment and/or employment process, please contact our local Human Resources department. To find an office near you, please visit: .

Job Description Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices nationwide. We partner with businesses and jobseekers to place qualified individuals efficiently. Currently, CTS is reviewing resumes for Structural Welders in Sturgeon Bay, WI! Pay Rate: $30/hour and $660/week per diem Job Description: • Complete fillet and butt welds using the SMAW, GMAW, FCAW, and GMAW-P process (multi-pass) in 2G, 3G, and 4G positions., • Heat oxygen/propane heating torch., • Perform grinding and pick up work as needed., • Complete air carbon arc gouging., • Properly use fillet and butt gauges., • Minimum 8 years of naval/commercial welding experience., • Successfully pass several tests over a three-week period., • Must have reliable transportation., • Familiar with OSHA regulations relative to the shipbuilding industry., • Pass hair follicle test and background check., • Comfortable with heights and in confined spaces., • Lift 50lbs without assistance., • Must understand the layout of the ship and compartment identification., • Basic reading, writing and math skills required. CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Voluntary Life/Voluntary AD&D, • Short-Term Disability, • Long-Term Disability, • Hospital Indemnity, • Accident, • Critical Illness Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

Job Description This is a year-round open position for ongoing recruitment purposes. About The Bishop’s School Founded in 1909 and affiliated with the Episcopal Church, The Bishop’s School is an independent, all gender college-preparatory day school for 800 students in grades six through twelve located on a historic campus in the heart of La Jolla, just 10 miles north of downtown San Diego. With a student-teacher ratio of approximately 9 to 1, Bishop’s is known for academic, artistic, and athletic excellence while celebrating character development, diversity, inclusion, and belonging. Last year’s applicant pool drew from 72 zip codes and 168 middle and high schools throughout San Diego County and beyond. Fifty-one percent of the student population self-identify as students of color. Additionally, over $5 million in need-based grants is awarded annually. The Bishop’s School is looking for qualified Head Coaches and Assistant Coaches for our Varsity, JV, and Middle School teams. Sports currently offered at The Bishop’s School in various seasons and team settings include: Football, Cross country, Flag Football, Lacrosse, Volleyball, Basketball, Field Hockey, Soccer, Softball, Baseball, Tennis, Track, Water Polo, Equestrian, Sailing, Surf, Swimming, Golf. Please also see our Athletics website for the most up-to-date information on our program. Bishop’s coaches instruct and work with athletes to prepare them for competition. Coaches help athletes to play their best individually and as a team while instilling the School’s mission and values. They are experts on the rules, strategies, and techniques of their sports. Coaches must also know about sports equipment, physical fitness and safety. Anticipated Base Compensation Depending on Experience: $19 - $30/hour Qualifications: Proven job experience as a coach or experience in working with students 6-12 grades. Strong ability to adhere to regulations and standards. Outstanding communication and interpersonal skills. Excellent organizational and problem solving ability. Ability to inspire and motivate. Preferred Certifications: • NFHS Fundamentals of Coaching, • First Aid and CPR Training and certification, • NFHS Sudden Cardiac Arrest, • NFHS Concussion Training, • NFHS Heat Illness Training, • Dedicated work ethic: proactive, responsible, reliable and attentive to deadlines., • Knowledge of applicable team or individual sports and playing rules., • Demonstrated competitive coaching skills in area of sporting specialty., • Strong interpersonal and communication skills and the ability to work effectively with student-athletes and families., • Ability to communicate effectively, both orally and in writing., • Knowledge of strengthening and conditioning methods and techniques, • Motivated, highly organized, and a self-directed individual who can effectively multitask and handle a variety of matters independently in a professional, trustworthy and mature manner with tact, diplomacy, and appropriate judgment., • Ability to actively collaborate with all School constituencies., • Intermediate proficiency with Google Workspace and Microsoft Office, and a willingness to become proficient in new programs, learning management systems, collaboration and productivity apps as needed., • Embrace the special needs and requirements associated with an academic calendar and schedule which may necessitate fluctuations in workdays and hours., • Strong advocate of the School’s mission and school values of integrity, compassion, inclusion, intellect, excellence and justice., • Knowledge of applicable team or individual sports and playing rules., • Ability to organize and lead daily practices., • Demonstrated competitive coaching skills in area of sporting specialty., • Strong interpersonal and communication skills and the ability to work effectively with student-athletes., • Knowledge of strength and conditioning methods and techniques., • Ability to transport students in a school vehicle if necessary., • Communicate with student athletes to understand their goals and ambitions., • Assess the strengths of individual athletes and teach them to use them effectively and improve their skills overall., • Monitor and evaluate progress of student athletes., • Uphold the School’s core values., • Demonstrate professionalism, tact and an unwavering positive attitude., • Stay up to date on industry standards, trends, developments and legal updates., • Make timely and ethical decisions both systematically and under pressure., • Maintain a clean, safe, and organized work area., • Perform, with a team approach, other duties as assigned. Please do not contact the school directly. EEO The Bishop's School is an equal opportunity employer. We are a diverse community of professionals that broadly reflects the people of the San Diego area and the United States at large. We aim to align our hiring process with our mission and institutional goals. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion or religious practices, sex, gender identity or expression, sexual orientation, citizenship status, national origin, age, ability status, military status, unemployment status or any other category protected by applicable local, state, or federal laws. The Bishop's School takes affirmative action in support of its policy to employ and advance all qualified candidates. Powered by JazzHR lspR87a3It

Job Description Job Description SOUTH BAY SANDBLASTING & TANK CLEANING, INC. located in San Diego, CA shipyard related subcontractor looking to hire a Sand Blaster for our Preservation Department Job Summary A Sand Blaster has experience with the laborer job functions in the Preservation department and some painting experience. The ideal candidate knows how to perform sand blasting on underwater hulls, and tanks, ballast, fuel, and potable water. May be required to perform additional duties as deems necessary by the Production manager for the completion of the job in a safe and timely manner. Must be willing to travel. Responsibilities: • Remove dirt, paint, grease, and other built-up material from surfaces, • Set up and operate a blast booth or similar equipment, • Load and unload the blast equipment, • Operate and maintain blasting equipment, and ensure it is safe and efficient, • Assist with painting or coating as needed, • Apply and remove non-skid materials as needed, • Use proper PPE, including respirators, • Effectively using heavy and light equipment, depending on the jobsite/assignment, • Implement and follow the company's safety, quality, environmental policies, and OSHA shipbuilding regulations Qualifications: • Ability to read labels, safety warnings, and guidelines, • Attentive to detail and alert always to ensure safety, • Able to receive, and follow instructions and communicate with co-workers, • Excellent Verbal and written communication skills, • Ability to safely operate various vehicles and equipment, • Previous experience, especially in particular industry, 3 years preferred, • SSPC C7 Certification, • Available to work long shifts when needed 10+ hours Education Requirements: • High school diploma or GED, B.A., Technical/Vocational trade school, or apprenticeship Working Conditions and Physical Demands: Work is conducted indoors and outdoors frequently exposed to prevailing weather conditions. Work indoor or aboard vessel which may have fumes, chemicals, and heat as well as noise and dust present depending upon the location of work. Safety equipment required. The individual must be able to frequently climb inclined stairways and vertical. Work aboard the vessels can be strenuous and sometimes hazardous. Dynamic, fast-paced outdoor setting with moderate to loud noise levels from production activity in the shipyard. Must be able to stand and walk for long periods of time. Must be flexible to work varying schedules and hours as needed. The physical demands described above are representative of those that may be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Other requirements: All positions require a pre-employment medical test. This employer participates in E-Verify. Must be able to qualify for DBIDS security clearance. Ability to read technical English is a must. U.S. Citizenship is preferred (for some work locations it is required). Must be authorized to work in the U.S. To respond to this ad, you: Please respond to this ad on our website: Women, veterans, and their spouses are encouraged to apply. We are an Equal Opportunity Employer. EEO/AA M/F D/V Job Type: Full-time Job Posted by ApplicantPro

Job Description Job Description SOUTH BAY SANDBLASTING & TANK CLEANING, INC. located in San Diego, CA shipyard related subcontractor looking to hire a Painter for our Preservation Department Job Summary Under general supervision, a Painter will perform routine and preventive maintenance painting duties, and a full range of specialized painting projects including, painting large structures in severe environment; performs inspections, clean ups, storage, and disposal of paint products; and operates various tools and equipment. May be required to perform additional duties as deems necessary by the Production manager for the completion of the job in a safe and timely manner. Must be able to travel. Responsibilities: • Prepare a variety of routine and preventive maintenance painting duties, • Prepare and mix paint, specifically standard epoxies and UHS coatings, • Prepare and paint a variety of surfaces including, aluminum, ferrous metal, interior shop coat metal, uncoated metal, accessories, and other surfaces as specified; protect and prime surfaces as appropriate; apply finish coating to our standards, • Correct work as directed, any imperfections in the finish, • Clean up work areas, equipment, supplies and materials; apply standard safety practices and procedures, • Always follow manufacturers specification, • Assist in training other workers as necessary, • Use proper PPE, • Effectively using heavy and light equipment, depending on the jobsite/assignment, • Implement and follow the company's safety, quality, and environmental policies; and OSHA requirements in the shipbuilding industry Qualifications: • Ability to read labels, safety warnings, and guidelines, • Attentive to detail and alert always to ensure safety, • Able to receive, and follow instructions and communicate with co-workers, • Excellent Verbal and written communication skills, • Ability to safely operate various vehicles and equipment, • Previous experience, especially in particular industry, 3 years preferred, • SSPC C12 or C14 Certification Education Requirements: • High school diploma or GED, B.A., Technical/Vocational trade school, or apprenticeship Working Conditions and Physical Demands: Work is conducted indoors and outdoors frequently exposed to prevailing weather conditions. Work indoor or aboard vessel which may have fumes, chemicals, and heat as well as noise and dust present depending upon the location of work. Safety equipment required. The individual must be able to frequently climb inclined stairways and vertical. Work aboard the vessels can be strenuous and sometimes hazardous. Dynamic, fast-paced outdoor setting with moderate to loud noise levels from production activity in the shipyard. Must be able to stand and walk for long periods of time. Must be flexible to work varying schedules and hours as needed. The physical demands described above are representative of those that may be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Other requirements: All positions require a pre-employment medical test. This employer participates in E-Verify. Must be able to qualify for DBIDS security clearance. Ability to read technical English is a must. U.S. Citizenship is preferred (for some work locations it is required). Must be authorized to work in the U.S. To respond to this ad, you: Please respond to this ad on our website: Women, veterans, and their spouses are encouraged to apply. We are an Equal Opportunity Employer. EEO/AA M/F D/V Job Type: Full-time Job Posted by ApplicantPro

Job DescriptionBenefits: • 401(k) matching, • Company parties • Need to have a clean driving record., • Need to be available after hours if required. SD Expert Plumbing Inc. is a San Diego-based family-owned and operated plumbing & drain cleaning company. We are currently hiring an experienced Plumber. This position will perform routine preventive maintenance and repairs on plumbing systems. Responsibilities We are a residential and commercial service and repair plumbing company specializing in plumbing, drain repair, and maintenance. Responsibilities will include, but are not limited to: • Providing the best customer experience to our San Diego community, • Assembling and installing plumbing systems, • Troubleshooting and repairing pipe and pipeline systems and sewer systems., • Preparing written work cost estimates for clients, • Adhering to safety policies and procedures, • Repairing and servicing water heaters, conventional and tankless, • Minor and major plumbing service and repairs, including shower valves, disposals, fixtures (repair and replacement), gas lines, wall heaters, slab leak locations & repairs, • Each plumber/drain tech will report directly to the dispatcher or property maintenance tech.Qualifications, • At least 2-years of previous plumbing/drain experience preferred, • Previous experience in plumbing, • Ability to handle physical workload, • Strong troubleshooting and critical thinking skills, • Excellent written and verbal communication skills, • Knowledge of Uniform Plumbing Code preferred, • Strong customer service skills, • Clean DMV record and driver's license requiredCore Competencies, • The ability to interact positively and respectfully and establish and maintain cooperative working relationships., • Ability to display excellent customer service; to meet the needs and expectations of both internal and external customers., • Excellent listening and interpersonal communication skills to identify critical core competencies based on success factors and organizational environment., • Ability to effectively organize, prioritize, multi-task, and manage time., • Demonstrate accuracy and productivity in a changing environment with constant interruptions., • Demonstrate the ability to analyze information, problems, issues, situations, and procedures to develop effective solutions.Physical Requirements, • This role routinely uses construction equipment such as heavy machinery and hand and power tools., • While performing the job duties, the employee may work aloft, climb, bend, pull, reach overhead, stand/walk for long periods and lift over 50 lbs., • Frequently required to use hands & fingers to handle or feel objects, tools, or controls, and reach with hands and arms.Environmental Conditions, • Plumbers travel to a variety of worksites every day., • They may work in varying temperatures, both inside and outside, including inclement weather, heat, humidity, cold, and dampness., • May work in areas with exposure to moderate/high noise levels., • They may be exposed to fumes or airborne particles, including dust., • They may be required to work in confined spaces or from high heights., • They MUST be ok with getting DIRTY!!

Job Description Labor One is hiring Journey-Level Specialty Welders (Alum, CuNi, Stainless; TIG) for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for welding pipe of various metals on a ship or in a shop to support mechanical repairs and modernization of marine vessels including US Naval, Military Sealift Command, and commercial ships. The journeyman welder is also responsible for providing direction to assigned helpers. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information such as conditions found by writing condition reports that include recommended corrective action., 5. Must have a thorough knowledge of SMAW, FCAW, and GMAW theory., 6. Must be able to certify in P-3 joint with permanent backing ring, and P-14 socket weld joint:, 7. SMAW, 8. GTAW, 9. FCAW OR, 10. Silver Brazing, 11. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals., 12. Must possess a working knowledge of equipment and work processes used in marine pipe welding., 13. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 14. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 15. Must have four (4) years of pipe welding experience. DUTIES AND RESPONSIBILITIES 1. Provide direction to a pipe welding helper, if assigned, as needed to complete the assigned tasks., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and pipe shop supervisor., 3. Work shifts and overtime as assigned., 4. Be accountable for completion of daily work assignments., 5. Comply with OSHA standards and the shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Ensure the work site is ready for hot work before commencing hot work. Communicate with the Fire Watch and provide direction as necessary., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 1st shift 40 hours per week/OT per HM approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job DescriptionLabor One is hiring Journey-Level Riggers for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The qualifications listed below are representative of the knowledge, skill, and/or ability desired. The individual must have working knowledge of procedures, strong mechanical aptitude and ability, and be able to follow directions. The individual must possess experience in the trade; knowledge of ship terminology, blueprint reading, job specifications and manuals. Must be able to follow directions and work with limited supervision. Must be willing to work with and train subordinates. SAFETY Must comply with Company safety rules and OSHA standards. Must be physically and medically qualified to wear required personal protective equipment as prescribed under OSHA standards. ESSENTIAL QUALIFICATIONS, DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. -Technically proficient in tasks, work processes, and equipment operation. -Accountable for completion of daily work assignments including the completion and signatures for work completion and quality. -Creates a working environment for compliant with quality, safety, environmental, and health regulations and policies. -Thorough knowledge of equipment used in rigging operations, included but not limited to lifting and moving equipment. -Knowledge of rigging testing requirements, proper set up and operation of equipment. -Selects cables, pulleys, winches, blocks, and sheaves, according to weight and size of load to be moved. -Attaches pulley and blocks to fixed overhead structures such as beams and ceilings with bolts and clamps. -Attaches load with lifting devices such as wires, nylon straps and chains to crane hook. -Gives directions to crane operator engaged in hoisting and moving loads to ensure safety of workers and material handled. -Sets up cranes hoisting equipment. Safe handling of anchors and chains. Lowers, handles and tests lifeboats. -Tests ships cranes using various rigging. Ability to interpret all crane load charts and blueprints. -Ability to work any assigned shift and ability to work assigned overtime. May be assigned tasks outside craft as required. -Must comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be business like and free of bias, prejudice, and harassment EDUCATION and/or EXPERIENCE Must complete practical demonstration of skills listed above. LANGUAGE SKILLS Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations before customers, clients, or employees of organization. MATHEMATICAL SKILLS The ability to add, subtract, multiply, and divide all units of measure, whole numbers, common fractions, and decimals in U.S. and metric conversions. REASONING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems that may arise in certain situations. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. Specific requirements include the following: 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Demonstrate the ability to bend, squat crouch, crawl and kneel., 4. Demonstrate the ability to climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Perform prolonged standing (2-3 hours)., 6. Able to work at a variety of levels (ex. Waist, eye, above head)., 7. Demonstrate the ability to safely and appropriately use required tools and equipment., 8. Demonstrate good balance while working on uneven surfaces and maneuvering obstacles., 9. Posses sufficient handgrip and coordination to carry and operate tools and equipment., 10. Ability to utilize personal protective equipment (hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards., 11. Ability to withstand extreme temperatures (cold and hot)., 12. Ability to enter 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 13. Able to respond to verbal and audible sounds/commands., 14. Able to utilize adequate visual skills., 15. Ability to work at heights above 12' while working from ladders, scaffolding and/or manlifts., 16. Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 17. Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers. 18. Ability to turn head from side to side and about on the vertical axis., 18. Ability to turn body at the waist from side to side and about the vertical axis. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the environment varies from normal office environment to wet and/or humid conditions, outside weather conditions, extreme cold, and extreme heat. The employee is occasionally exposed to moving mechanical parts and high places. The noise level in the shipyard environment is usually loud; office environment is usually low to moderate. The wearing of appropriate personal protective equipment mitigates risks associated with these conditions and is mandatory. 1st Shift 40 hours a week / OT on approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Company Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is an industry leader, providing engineering and industrial services to the U.S. Navy, U.S. Coast Guard, Military Sealift Command, and other DoD organizations. At Continental Tide, we understand that a great company culture is one where employees know their voice is heard, no matter what their title is, and letting them grow in their role as the company does. We want to provide our employees with the opportunity to learn, be challenged and be in a position where they can succeed, develop new skills, and do things they wouldn't have the opportunity to do elsewhere. Our fast-paced and challenging environment, employees here at Continental Tide can catapult themselves to the top and we're looking for 'the best at what they do' to join our team and help us grow! *Please note due to the anticipated volume of responses, we will contact only those candidates who most closely match our requirements. Only local candidates will be considered. Veteran and retired candidates welcome! Job Overview: Continental Tide is seeking an experienced and skilled Pipefitter. The successful candidate will join our Fleet Services Group performing various ship repair, modernization and Alteration Installation Team (AIT) projects. Essential Duties & Responsibilities: • Apply craft for layout, fit up. Install and maintain piping systems on board ships, and submarines such as steam, heat, power, hydraulics, compressed air, sea water, freshwater and chilled water systems., • Braze various pipe items to support on-site installations, fits and assembles parts into complete assembly and verify dimensions and alignment of assembly., • Must possess knowledge and experience in planning layout of piping systems following blue prints allowing for conformance to specifications, holes, and obstructions., • Ability to measure cut and bore holes in bulkheads and decks for installation of piping., • Demonstrate strong procedural knowledge of pipe bending and shaping, and knowledgeable in operating shop machines to cut and thread pipe and pipe fittings., • Ability to test installed systems utilizing hydrostatic or other comparable pressure testing means for system integrity after repairs or installation., • Thorough knowledge of types of piping materials to be utilized for installations based on drawing or blue prints, • Performs other duties as assigned., • Must possess a high school, trade or vocational school degree, • 5-10 years of direct experience in ship repair and installation of Hull, Mechanical & Electrical (HM&E) systems and equipment., • Ability to read and interpret ship installation drawings, installation specifications and NAVSEA Standard Items is preferred., • Must have or have the ability to obtain a SECRET clearance, • Must have the ability to obtain base access and security credentials, • Ability to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs., • Ability to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces., • Travel may be required within and outside of the continental United States., • Due to export control regulations, this role is open to U.S. citizens only. Benefits: Benefits: Continental Tide offers an empowering professional environment in a culture that stresses teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Continental Tides Defense Systems, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. See all of our latest opportunities at or follow us on our LinkedIn page at . To be considered you must apply by going to .

Job Description Labor One is hiring Outside Machinist Improvers for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for removing, installing, and testing main and auxiliary shipboard equipment including but not limited to: Main Reduction Gears (MRG), pumps, valves, hydraulic equipment, steam equipment, valves, propellers, bearings, etc. on maritime vessels including US Navy, Military Sealift Command, and commercial. The work occurs in various stages of repair and modernization and requiring the ability to operate a wide variety of tools and machinery, and the ability to read and comprehend specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have basic print (drawing) reading and interpretation skills., 3. Must have a working understanding of ship repair terminology and ship compartment location nomenclature., 4. Must be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 5. Must be able to write reports describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action., 6. Must be able to work from Process Control Procedures (PCP)., 7. Must be able to use precision measurement tools., 8. Must be able to effectively confer job related information to the structural supervisor and small groups, and provide technical guidance to Helpers and Improvers., 9. Must have a basic understanding of drawings, sketches, tech manuals, and user manuals., 10. Must understand the NAVSEA standard items, especially 009-04 for tests, inspections, and check points; 009-23 for interferences; and 009-24 for blanking and match marks., 11. Must have a comprehensive understanding of Lock-out / Tag-out procedures., 12. Must understand the proper and safe use and operation of the hand and power tools required to accomplish the work., 13. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system and the metric system., 14. Three (3) years of machinist experience, preferably one (1) of which is in the maritime environment. DUTIES AND RESPONSIBILITIES 1. Comply with OSHA standards and the shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the supervisor., 3. Work shifts and overtime as assigned., 4. Keep the work area clean and safe at all times, especially at the end of the shift., 5. Complete work assignments as scheduled and provide status of unfinished work for shift turnover., 6. Assist with the preparation of Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 7. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which requires that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 8. Receive technical guidance and carry out directions from a Journeyman or Supervisor., 9. Carry out instructions furnished in written, oral, or diagram form. Resolve unexpected events related to your assigned task in a professional manner. Work Tasks Include: a. Prepare a safe work area especially as it relates to fire prevention. b. Assist in the coordinate work with other crafts to disconnect and remove equipment. c. Compile as-found reports identifying the status of equipment prior to work. d. Assist with in-place valve repairs. e. Assist with material take offs with adequate information for ordering. f. Assist with equipment alignment. g. Assist with operational tests. h. Keep blanking logs up to date. i. Run and remove lines and leads as required to accomplish work and in accordance with OSHA and the shipyards safety standards. j. Assist with Lock-out Tag-out activities for work being performed. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that personnel may encounter every day in the course of performing work on ships, piers, docks. While performing the duties of this position the employee is regularly required to: stand; walk; use hands and fingers to handle directly or work from touch; reach out with arms; climb; stoop; kneel; crouch; crawl; and communicate in a loud environment. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: Candidates may be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 1st Shift 40 hours a week. Overtime with Supervisors approval. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Company Profile: Congruex Congruex was formed in 2017 to take advantage of historic demand for digital connectivity. The digital networks we design and build for our clients enable everything in the modern world to operate, from healthcare and energy to transportation and social interactions. Few companies in our industry can operate at scale and self-perform services like our multinational team. Our clients choose Congruex to deliver turn-key digital networks under a single platform. Our unified vision is to become the best end-to-end provider of network design and build services in the U.S. We are the One Congruex Family. We are building tomorrow, together. Why Work at Congruex Opportunities We offer opportunities at all levels across the nation – from students to industry veterans – in areas of engineering, construction, and professional services. Wellbeing We value the wellbeing of our people and offer competitive compensation, health benefits, wellness resources, 401(k) retirement planning, and employee recognition and leadership development programs. Options may vary by geographic location. Culture The pillars of Congruex culture are GRIT, safety, inclusion, and family. • GRIT: Our GRIT values are part of our company DNA and the touchstone for our multinational workforce., • Guts - having the guts to do the right thing, • Reliability - being reliable to deliver what we promise, • Innovation - innovating every day, • Teamwork - embracing teamwork together as One Congruex, • Safety: We are committed to 24/7 safety practices on our jobsites, within our offices, and all the places our team exists in between., • Inclusion: Congruex embraces our team’s diversity and promotes an inclusive workplace for all., • Family: We are a family-oriented company committed to the long-term health and development of our people. Job Summary: Fielders report field conditions for design engineers to accurately design the network. Responsible for aerial and underground data collection while validating a viable cost-effective path for engineering. Fielders may be assigned to perform field inspections of cable/fiber placement, splicing, and construction work on job sites after completion. The majority of fieldwork is conducted outdoors along public right of way, utility easements, and private property. Job Responsibilities (Including, but not limited to): · Gather aerial attachment heights and clearances, checking for violations · Determine ideal locations for new above ground facilities and equipment · Conduct Underground/Buried Cable layout surveys · Develop accurate fiber/optical network construction surveys · Determine existing and new locations for fiber optic cables · Inspect the work of construction contractors · Accurately depict new construction route opportunities · Assure that personal vehicle and tools are maintained to company safety standards · Responsible for always conducting job in safe manner · Take pictures of job sites, pole conditions and other relevant structures or landmarks · Make hand drawn sketches of recommended engineering design while in the field or facility · Upload clear images, files, hand notes, and sketches, and edit for quality and cohesiveness • Inspect fiber optic cables and the work of construction contractors., • Assist with data preparation and documentation of reporting field results., • Attend field meetings with client’s field personnel as well as government agencies and construction contractors., • Operate and maintain field equipment and tools such as laptop, iPad, height stick, camera, personal protective equipment (PPE), etc., • Daily travel to job site(s) using company or personal vehicle, • At times, may be required to interface with customers/landowners, • Occasional extended travel out of assigned market may be requested Required Skills & Qualifications: General · High school diploma or GED equivalent · Excellent verbal and written interpersonal communication skills · Superior time management skills · Strong attention to detail · Ability to be flexible, take direction with ease, including changes to schedule and workflow priorities · Critical thinking skills; make assessments and provide solutions to problems · Ability to follow direction in maintaining all Field Safety standards · Physical requirements: o Ability to stand, stoop, squat and bend for extended periods of time o Ability to look up for extended periods of time o Ability to walk for extended periods of time and/or long distances o Ability to navigate through potential uneven walkways/terrain o Tolerant to extreme elements (heat, sun, wind, rain, snow, etc.) o Good vision and depth perception (corrective lenses OK) o Ability to sit and drive for extended periods of time o Ability to lift 10lbs minimum, and potentially up to 50lbs Technical · Ability to quickly learn new systems and databases Desired Skills & Qualifications: · Comprehensive understanding of telecommunications design and the ability to support engineering · Basic Knowledge of Make-Ready Construction · Knowledge and experience with telecommunications engineering standards and construction techniques · Associate’s or Bachelor’s degree in Science, Technology, Engineering or Mathematics is a plus · Experience in either the engineering, construction, architecture or telecommunications industries is a plus The Fine Print: We will determine salary based on skills and experience in relation to the function of the role, as well as equity to employees in similar roles. Some benefits have eligibility criteria. All requirements are subject to possible modification to reasonably accommodate individuals with disabilities. This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. This document does not create an employment contract, implied or otherwise, other than an “at-will” employment relationship.