Heat jobs in Rochester, New YorkCreate job alerts

Job Description The Louis S. Wolk Jewish Community Center of Greater Rochester is located alongside the Erie Canal in Brighton. It is a 200,000 square foot facility that houses our state-of-the-art fitness, wellness, and recreation programming, an aquatics center, a Professional Theatre, a Children’s Center, and our camping programs. We pride ourselves on providing our members with high-quality educational, cultural, and social programming, and we are an inclusive community center that welcomes people of all faiths, backgrounds, and ages. We are looking for a Full-Time/Part-Time Housekeeper to join our team who is responsible for ensuring the facility is clean and sanitized for all our members, guests, and staff. Schedule Monday - Friday, 40 Hours, Saturday and Sunday, 16 Hours • Night shift: 5:30 PM - 2:00 AM To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable an individual with disabilities to perform the essential job functions. • Clean locker rooms, shower stalls, and washrooms daily., • Sweep, vacuum, mop, scrub, wax, and polish floors using industrial vacuum cleaners and scrubbing and buffing machines., • Operate various mechanized cleaning equipment, such as vacuums, polishers, and buffers., • Wash windows on a regular schedule., • Completely strip and recoat all floor areas when necessary and as scheduled., • Use ladders, dust, and wash walls, clean shower areas, bathrooms, sink areas, common areas, office, and all areas of classrooms, clean ceiling fans and vents, dust all areas, furniture, light fixtures, and windowsills., • Move furniture and equipment to clean areas. May remove stains from such surfaces as rugs, walls, and floors using chemicals and cleaning solutions., • Empty trash containers daily and are responsible for the disposal of trash., • Must handle various cleaning solvents, chemicals, etc., • Plan work schedule for major tasks., • May sweep walks and remove snow or perform other incidental seasonal tasks., • Report any needed repairs immediately to the supervisor., • Communicate effectively with staff and members of the Facility., • May perform other duties as requested by management. The physical demands described here are representative of those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to: • Extensive work while standing, extensive walking, reaching with hands and arms, grasping and twisting, climbing, and balance, • Frequent stooping, kneeling, crouching, or crawling, • Bending and moving continually during working hours, • Lift and/or move up to 50 pounds, • Lift and/or move over 50 pounds with assistance The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. • Moving mechanical parts, extreme heat, extreme cold, • Risk of electrical shock, fumes, cleaning chemicals, and outside weather conditions., • While performing the duties of this job, the employee is regularly exposed to inclement weather conditions, i.e., shovel snow, salt, wash windows, pick up trash, and empty garbage., • Health, Dental, and Vision, • Retirement Plan, Life and Disability Insurance, • Employee Assistance Program, • Free membership to our Fitness and Aquatics Center

Job DescriptionDescription: Supervisory Responsibilities: None Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. · Follows all safety process and procedures in accordance with the job and Company policy. · Interprets machine operation manuals and identifies problem source. · Disassembles and removes, repairs and/or replaces defective components on manufacturing equipment. · Specifies and quotes replacement items for manufacturing equipment and facilities. · Performs preventative maintenance, including lubricating and cleaning of manufacturing equipment. · Performs simple repairs on building and grounds (windows, fences, doors, etc.) and plumbing. · Construct simple facility improvement projects (door frames, shelving, partitions, etc.). · Visually inspects and tests machinery and equipment. · Listens for unusual sounds from machines or equipment to detect malfunction and discusses machine operation variations with supervisors or other maintenance workers to diagnose problem. or repair machine. · Cleans and lubricates shafts, bearings, gears, and other parts of machinery. · Installs and repairs electrical apparatus, such as transformers and wiring, and electrical and electronic components of machinery and equipment. · Lays out, assembles, installs, and maintains pipe systems and related hydraulic and pneumatic. equipment, and repairs and replaces gauges, valves, pressure regulators, and related equipment. · Repairs and maintains the physical structure of the establishment. · Must possess own tools. · Installs, programs, or repairs automated machinery and equipment such as robots or programmable controllers and a firm grasp of Ladder Logic is required. · Be able to respond to call-backs in emergency break down situations on an as needed basis. · Other duties as assigned. Requirements: Education High school diploma or general education degree (GED), or equivalent combination of education and experience. Experience 3-5 years related experience or training. Other Requirements Ability to read blueprints, interpret operation manuals; understanding of manufacturing equipment and facilities; ability to use hand and power tools and mechanical testing equipment; welding, machining and plumbing experience helpful. Computer Skills: Keyboarding Language Skills: Intermediate Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Mathematical Skills: Intermediate Skills: Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. Reasoning Ability: Intermediate Skills: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the employee is regularly required to stand; walk; sit; maneuver through the office and factory; use hands to finger, handle, or feel; reach with hands and arms; grasp and twist, climb or balance; stoop, kneel, crouch, or crawl; talk or hear; lift and/or move equipment/product weighing up to 50 pounds. Work with another associate to lift anything greater than 50lbs. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. While performing the duties of this job the employee is regularly exposed to humid conditions; moving mechanical parts; high, precarious places, extreme heat; extreme cold; risk of electrical shock; toxic or caustic chemicals and outside weather conditions. The noise level in the work environment is usually loud.

Job Description RED-Rochester is a multi-utility generation plant and district energy supplier to one of the world’s most comprehensive industrial parks: the Eastman Business Park. Supporting a 1,200-acre campus, RED-Rochester has the utilities, infrastructure, technical services, support services, space and complementary regional resources to benefit a wide range of industry verticals. We are seeking a Utility Measurement Technician who enjoys the challenge of supporting utility services through inspecting, calibrating, installing and maintaining measurement equipment for a utility provider. Our infrastructure consists of a blend of classic and modern industrial assets and requires a person with broad industrial and utilities expertise – able to instruct and advise others; able to manage both up and down the organization; and able to work collaboratively with other departments to achieve success. Responsible for the installation, maintenance, calibration, and repair of various measurement equipment to accurately meter steam, water, thermal systems, and gases. Working directly with a wide variety of meters such as differential pressure, vortex, ultrasonic, positive displacement, and other types. Duties include interacting with customers on occasion to resolve measurement issues. Essential Duties and Responsibilities  Maintains and troubleshoots measurement equipment.  Performs calibrations on meters including blowing down and calibrating orifice plates.  Assists with new meter installations.  Performs and documents routine maintenance and checks of meters.  Inspects and calibrates instruments and test equipment periodically and adjusts calibration to ensure functioning within specified or established standards.  Install, repair, and replace insulation jackets and/or heat trace (both electric and steam) for impulse lines.  Interacts with engineering, project management, operations, customers, and other technical groups as required to resolve issues.  Assist other technical groups as needed.  The ability to effectively communicate, both verbally and in writing, with other individuals, teams, customers, and stakeholders of the business, at various levels of the organization, in a business-like and professional manner is required. Education and/or Experience: • High School Degree/GED (Required), • Relevant vocational school degree or certification (Preferred), • Experience working in a plant or utility environment (Required), • Experience working with steam systems (Preferred), • Experience working with pressure, flow, and/or temperature measurement (Required), • Utility metering experience (Preferred) Qualifications  Must have valid drivers’ license and proof of insurance  Must be able to operate a lift (working up to 40’ overhead) and ladders. (Lift training will be provided).  Ability to work in a variety of physical environments at varying temperatures (hot and cold).  Capable of lifting/carrying/pushing/pulling up to 50 lbs  Capable of vigorous outdoor activities and have manual dexterity with physical ability to work extended hours, climbing, bending, kneeling, squatting, working with arms extended above the head, twisting upper body, standing for long periods, walking on catwalks, working in confined spaces, exposure to extreme weather conditions, driving a vehicle, operation of forklifts and light industrial equipment Competencies: • Knowledge of utility measurement principles and meter technologies., • Knowledge and demonstrated practice of industrial safety/OSHA rules/regulations, including Lockout/Tagout, Confined Space Entry, Fall Protection, Electrical Safety, and others., • Familiarity with Microsoft Windows and Microsoft Office software., • Good communication skills in English., • Excellent problem solving and demonstrated trouble shooting skills., • Strong mechanical and electrical aptitude., • Ability to follow procedures, work instructions and environmental rules and regulations., • Ability to recognize opportunities for process improvements and assist in implementation., • Ability to work both independently and in a team environment., • Ability to consult manuals, read and interpret circuit diagrams, electrical schematics, and other drawings.

Job Description About Us: Turnbull Heating & Air Conditioning has been proudly serving the Rochester area for decades, providing top-tier residential HVAC services with a focus on quality, customer satisfaction, and technical excellence. We value our team members and invest in their continuous growth and development. Position Summary: We are seeking an experienced and motivated Residential HVAC Service Technician to join our team. The ideal candidate will be responsible for troubleshooting, repairing, and maintaining residential heating, ventilation, and air conditioning systems. This position requires strong technical skills, excellent customer service abilities, and a commitment to ensuring each homeowner’s comfort and satisfaction. Key Responsibilities: • Diagnose and troubleshoot HVAC equipment and systems (furnaces, air conditioners, heat pumps, ductless mini-splits, etc.)., • Perform preventative maintenance and repairs on residential HVAC systems., • Accurately complete service orders and maintain detailed service records., • Communicate effectively with homeowners regarding service issues, repair options, and recommendations., • Ensure all work complies with company standards, safety policies, and local HVAC codes., • Maintain a clean and organized work vehicle and manage inventory of parts and tools., • Provide emergency service as needed (rotating on-call schedule)., • High school diploma or equivalent required; technical school certification preferred., • Minimum 2 years of residential HVAC service experience., • EPA Universal Certification required., • Strong knowledge of HVAC systems, controls, and components., • Ability to read and interpret technical manuals, schematics, and wiring diagrams., • Excellent troubleshooting and problem-solving skills., • Strong customer service and communication skills., • Valid NY State Driver’s License with a clean driving record., • Ability to work independently and as part of a team., • Competitive hourly wage (based on experience)., • Overtime and performance-based bonuses., • Company vehicle, tools, and uniforms provided., • Health, dental, and vision insurance., • 401(k) with company match., • Paid time off and holidays., • Ongoing technical training and career advancement opportunities.

Job DescriptionDescription: At American Packaging Corporation (APC), you’ll find the packaging career you’ve been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC’s longstanding success is fueled from the inside out. We’re constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America’s awards for 12 years in a row. It’s how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Rochester, NY SUMMARY: Use experience and skills to troubleshoot, repair, adjust and maintain manufacturing and ancillary equipment. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: • Troubleshoot, repair, adjust and maintain manufacturing and ancillary equipment., • Troubleshoot, repair, adjust and maintain hydraulic, pneumatic, mechanical, electrical and electronic systems., • Possess an ability to use monitoring and testing equipment to facilitate in the troubleshooting, repairing, adjusting, and maintaining of manufacturing and ancillary equipment., • It is the responsibility of the maintenance individual to further his abilities, skills knowledge to expand his capabilities in troubleshooting, repairing, adjusting and maintaining existing as well as new equipment and technology., • Responsible for working safely, follow LO/TO and electrical safety policies. OR 8 hour 12 days on 2 days off schedule of 11pm - 7am OR 3pm - 11pm Requirements: QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE Two-year certificate from college or technical school with a focus in machining and/or electronics; or two years related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. REASONING ABILITY Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. PHYSICAL DEMANDS While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel. The employee frequently is required to stand; walk; reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear. The employee is occasionally required to sit, climb or balance, and taste or smell. The employee must occasionally lift and/or move more than 100 pounds. WORK ENVIRONMENT While performing the duties of this job, the employee is occasionally exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; extreme cold; extreme heat; risk of electrical shock; risk of radiation; and vibration. The noise level in the work environment is usually moderate. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: .

Job DescriptionJob Overview: We are seeking a highly motivated and skilled Maintenance Mechanic who performs mechanical repairs on all production and non-production equipment. Key Responsibilities: • Follows all safety process and procedures in accordance with the job and Company policy., • Interprets machine operation manuals and identifies problem source., • Disassembles and removes, repairs and/or replaces defective components on manufacturing equipment., • Specifies and quotes replacement items for manufacturing equipment and facilities., • Performs preventative maintenance, including lubricating and cleaning of manufacturing equipment., • Performs simple repairs on building and grounds (windows, fences, doors, etc.) and plumbing., • Construct simple facility improvement projects (door frames, shelving, partitions, etc.)., • Visually inspects and tests machinery and equipment., • Listens for unusual sounds from machines or equipment to detect malfunction and discusses machine operation variations with supervisors or other maintenance workers to diagnose problem or repair machine., • Cleans and lubricates shafts, bearings, gears, and other parts of machinery., • Installs and repairs electrical apparatus, such as transformers and wiring, and electrical and electronic components of machinery and equipment., • Lays out, assembles, installs, and maintains pipe systems and related hydraulic and pneumatic. equipment, and repairs and replaces gauges, valves, pressure regulators, and related equipment., • Repairs and maintains the physical structure of the establishment., • Must possess own tools., • Installs, programs, or repairs automated machinery and equipment such as robots or programmable controllers and a firm grasp of Ladder Logic is required., • Be able to respond to call-backs in emergency break down situations on an as needed basis., • Intermediate Skills: Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry., • The noise level in the work environment is usually loud., • This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change at any time with or without notice.Hours:, • Full Time - 40 hours per week, • Monday - FridayBenefits:, • Competitive salary and benefits package., • Opportunity to work in a dynamic and innovative environment., • Professional growth and development opportunities., • Collaborative and supportive work culture.Contact Us:

Job DescriptionSalary: Are you a skilled electrician with a passion for renewable energy? Do you enjoy troubleshooting complex systems and working outdoors? Join Energy Support Services, a subsidiary of New Energy Equity, as an O&M Technician Level 3! In this role, youll lead complex inspections, troubleshooting, and repairs on solar energy systems. As a technical expert, you'll provide guidance and training to junior technicians while ensuring our solar projects operate at peak efficiency. If youre passionate about renewable energy and ready to make an impact, we want to hear from you. Join us and help drive the future of clean energy! A $3,000 sign-on bonus is available to new hires who meet all eligibility requirements! ESSENTIAL FUNCTIONS: • Safety:, • Ensure work is performed in accordance with safety policies and procedures., • Review and ensure correct PPE is available and being used properly., • Create PLOTO and LOTO Switch plans for approval., • Work leader for Pre Job-Brief, Job Safety Analysis, Personal LOTO, and switch plan LOTO, • Inspections & Preventative Maintenance:, • Lead comprehensive inspections of solar power plants., • Develop and implement preventative maintenance programs., • Supervise and train junior technicians on inspection and maintenance procedures., • Troubleshooting:, • Diagnose and troubleshoot complex system issues, including grid integration and communication problems., • Utilize advanced diagnostic tools and software to diagnose and address system performance issues., • Develop and implement corrective action plans., • Documentation:, • Create and maintain comprehensive documentation of inspections, maintenance, and repairs., • Prepare technical reports and presentations for management., • Learning & Knowledge:, • Stay current on industry trends and emerging technologies., • Provide technical guidance and mentorship to junior technicians., • Contribute to the development of training materials and procedures., • Skilled in Work Order documentation and providing oversight and direction in documentation to junior technicians., • Able to travel on short notice and be available during non-traditional working hours., • Up to 50% travel may be expected at times., • Other duties as assigned. QUALIFICATIONS: • Associate's degree in electrical engineering or related field preferred., • 2-4 years of experience in the solar industry or related field., • OSHA 30-hour and NFPA 70e certification., • FAA Part 107 Certification., • Proficient operating Drones for Aerial Thermographic purposes., • Proficient knowledge of electrical systems, solar energy technologies, and grid-tied systems., • Proficient the use of diagnostic tools such as I/V Curve Tracers, Meggers, and Isolation testers., • Ability to read and interpret complex electrical schematics and engineering drawings., • Strong analytical, problem-solving, and decision-making skills., • Ability to lead junior technicians in the field., • Excellent communication, interpersonal, and presentation skills., • Valid driver's license and clean driving record. PHYSICAL REQUIREMENTS • Be able to drive a vehicle confidently and with a high degree of safety., • Be able to stand for long periods of time and walk distances up to three miles a day., • Be able to navigate ladders, stairs, scaffolding, ramps while maintaining 3 points of contact., • Have the visual acuity for depth perception, no field of vision issues, and to distinguish between colors., • Be comfortable working in a variety of climate conditions which may include but are not limited to, extreme heat (temperatures above 100F) or extreme cold (temperatures below 32F) for periods of more than one hour., • Be able to exert up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. Employer will not Sponsor Visas The expected annual compensation range for this position is $80,000 - $100,000, encompassing base pay and potential incentive target opportunity. This range is a good faith estimate based on the position's requirements. Specific compensation offered to the selected candidate may vary depending on factors such as relevant knowledge, skills, training, experience, and market conditions. Additionally, this position may qualify for a comprehensive benefits package, including Retirement Benefits, Medical, Dental & Vision, Health Savings Account, Flexible Spending Account, Life Insurance and Disability, Tuition Reimbursement, Voluntary Benefits, Paid Absences, and more. About Us: At New Energy Equity, a proud subsidiary of ALLETE, were leading the charge in transforming the energy landscape with innovative solar solutions. As a top player in the renewable energy sector, weve successfully developed over 600MW of solar projects and closed more than $1.2 billion in clean energy investments. Our projects deliver sustainable electricity to a wide range of clients, including commercial, industrial, municipal, and utility customers.But theres more to us than just impressive numbers. We pride ourselves on a dynamic and engaging work environment where teamwork, continuous learning, and environmental stewardship are at the core of what we do. Our inclusive and collaborative culture encourages creativity and innovation, making our office a place where every idea is valued, and growth is a priority.At New Energy Equity, youll join a passionate team that not only drives the clean energy future but also enjoys celebrating our successes together. With over 250 projects across the U.S., our supportive atmosphere ensures a balanced work-life dynamicand a fun, fulfilling career path.Join us and be part of a forward-thinking company where your contributions are celebrated, and your professional development is supported as we work towards a brighter, sustainable future. The statements above outline the essential functions, nature, and level of work expected as of the documents preparation date. They are not exhaustive lists of all duties and responsibilities. New Energy Equity reserves the right to modify this job description at any time, without notice. New Energy Equity is an equal opportunity employer. All applicants will be considered for employment without discrimination based on race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status, or any other basis prohibited by federal, state, or local law. If you are an individual with disabilities who needs accommodation or you are having difficulty using our website to apply for employment, contact our HR department at

Job Description Turnbull Heating & Air is a premier heating and air conditioning company dedicated to providing top-tier home comfort solutions to customers in Rochester and Batavia New York. We take pride in our high-quality workmanship, commitment to customer satisfaction, and a strong team-oriented work environment. We are one of the few remaining locally owned family businesses dedicated to our industry. Position Overview We are seeking a skilled and experienced Residential HVAC Installer with a minimum of two years of experience in the field. The ideal candidate will be responsible for installing, replacing, and upgrading home comfort systems, ensuring quality installations that meet safety and code regulations. This role requires technical expertise, attention to detail, and the ability to work independently or as part of a team. Key Responsibilities: • Take a lead role on projects, giving direction and support to the assigned team, working alongside our project managers., • Install, replace, and upgrade residential HVAC equipment, including gas furnaces, condensing units, heat pumps, tankless water heaters, boilers, ductless systems, IAQ products and VRF., • Read and interpret schematics, and technical specifications., • Perform layout, assembly, and installation of ductwork, piping, and controls for residential HVAC systems., • Ensure all installations comply with local building codes, safety regulations, and company standards., • Perform brazing, soldering, and pipe fitting as needed., • Coordinate with project managers and field supervisor., • Provide excellent customer service and maintain professional relationships with clients., • Complete required documentation, such as job reports and material orders., • Troubleshoot and resolve installation issues efficiently., • Maintain a clean and safe work environment. Qualifications & Requirements: • Minimum two years of experience in residential HVAC., • Strong conceptual and practical knowledge of HVAC systems., • Proficiency in reading wiring schematics and technical drawings., • Experience with ductwork installation, brazing, and pipe fitting., • Ability to use hand and power tools safely and effectively., • EPA Universal Certification preferred., • OSHA 10 or 30 certification is a plus., • Ability to lift 50+ lbs and work in various conditions, including heights and tight spaces., • Strong problem-solving skills and attention to detail., • Valid driver’s license with a clean driving record. Compensation & Benefits: • Competitive pay based on experience., • Health, dental, and vision insurance., • Retirement plan with company match., • Paid time off and holidays., • Company-provided vehicle, tools and uniforms., • Ongoing training and career growth opportunities.

Job Description Job Summary Performs the general maintenance repairs, apartment make ready execution, and preventive maintenance of an apartment community. This includes but is not limited to the daily operations at the property in the areas of landscaping, carpentry, painting, fencing and roofing repairs, plumbing, light electrical as well as the performance of all routine and preventative maintenance required to maintain the physical integrity of the property. Responsibilities include: (but are not limited to) • Vacant Unit Make-Ready Execution:, • Executes the maintenance required to prepare newly vacated units for new move-in to include painting, minor plumbing, electrical, appliance and carpentry repairs, • Work Request Fulfillment:, • Manages the process of completing work requests in a timely and effective manner, • Communicates status of work projects to supervisor and office management, • Overall Property Condition Maintenance:, • Conducts regular inspections of buildings, grounds, and vacant units to identify deficiencies and communicate concerns and issues with supervisor and office staff, • Performs snow removal duties and salting of properties on an as needed basis, • Customer Service:, • Provides customer service and supports the company’s commitment to go above and beyond residents’ expectations in a professional, can do manner, • Other duties as assigned Required Skills and Experience: Maintenance Technician I’s must possess at least three (3) of the following documented skills: • High competency in plumbing (sweat copper, install valves, rebuild stems, replum sinks, clear drains), • High competency in electrical (use multimeters, replace breakers, wire 3 way switches), • High competency in HVAC (ability to diagnose and compete a variety of repairs for Split Systems, Heat Pumps, and/or boilers), • High competency in carpentry (hang cabinets, hang sheetrock, finish & patch), • Ability to train peers, required, • Ability to work safely in challenging places: climb ladders and work on elevated surfaces (i.e. clean gutters or work on roof top units) and/or work in confined spaces (i.e. access crawl space to work on plumbing), required, • High level of customer service, required, • Attention to detail and quality control under tight timelines, • Initiative to identify and to positively solve problems within established processes, • Ability to effectively communicate and interact with managers, co-workers, vendors and residents sufficient to exchange or convey information and to give or receive work direction, • Excellent interpersonal skills, • Outstanding organizational and time management skills with the ability to multitask, • Ability to be at work regularly and on time Must have valid driver’s license & acceptable driving record Reliable transportation required Ability to work weekends or extended hours as required, including on-call rotation PHYSICAL REQUIREMENTS-

Job Description We're looking for Automotive Mechanics with a minimum of 1 year of professional automotive repair experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As a Brake & Tire Technician, you'll be expected to perform light maintenance or repairs, including changing brakes and tires and performing: • Technician services, such as routine inspections/maintenance, • Basic mechanical repair for brake pads/calipers/rotors, tire installations, and wheel alignments At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Pay Range: $19-$22 hourly Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs Not a match for this role? We have a variety of Technician roles in our Inspection Centers, depending on your level of experience - take a look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers: • Entry-Level Auto Technician (min 6 months professional experience): perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process., • Brake and Tire Technician (min 1 year professional experience): perform light maintenance or repairs, including changing brakes and tires, • Mid-Level (Mechanical Repair / Build / General) Technician (min 3 years of professional experience): perform light to medium automotive repairs and minimal diagnostics on our vehicles, • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold) To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job DescriptionDescription: General Job Summary: Responsible for assembly/packing of sheet metal components of small or medium sized parts, fitting and/or adjustment of inter-related parts and/or assembly based on written specifications. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Follows all safety processes and procedures in accordance with job and Company requirements., • Following specific written instructions and/or blueprints, assembles components into finished product., • Disassembles and re-builds products per specifications., • Conducts quality checks following quality process instructions., • Pack and labels product following packaging instructions., • Ensures that the work area is clean, orderly, and safe., • Work in packaging as needed, including packing large assemblies or parts., • Inspect parts for defects or damage prior to packing., • Make boxes, apply labels, verify counts, and follow packing instructions., • Follow directions on packing from Packaging Lead., • Assists with other duties as assigned by supervisor/manager. Supervisory Responsibilities: None Requirements: Education High school diploma or general education degree (GED) Experience 2-4 years related experience or training or equivalent combination of education and experience. Other Requirements: Additional mechanical training and/or blueprint reading a plus. Ability to use hand tools such as screw drivers, sockets, Allen wrench, air drivers, tape dispenser and material handling equipment such as tow motor. Ability to read and understand blueprints, quality and packing instructions. Computer Skills: None required. Language Skills: Intermediate Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or Associates of organization. Mathematical Skills: Basic Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate. Reasoning Ability: Intermediate Skills: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Physical Demands: The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to sit; walk, stand for extensive periods of time, maneuver through the office and factory; use hands to finger, handle, or feel; reach with hands and arms; grasp and twist; talk or hear; and lift and/or or move equipment/product weighing up to 50 pounds. Utilize lift assist or work with another associate to lift anything greater than 50Ilbs. Must pass physical abilities test because of weight of assemblies being worked on. Work Environment: The work environment characteristics described here are representative of those an Associate encounter while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. The work environment may include humid conditions and extreme heat and cold. While performing the duties of this job the noise level in the work environment is usually loud.

Job DescriptionSalary: Linear ft Sub-Contractor Industry leader seeking Sub-Contractors to complete fence installations. Typical work week is Monday to Friday. Work consists of building all types of fence, including vinyl, aluminum, wood, and chain-link. Pay can be paid on a per-foot rate.Consistent and stable work. Paid weekly. We Provide: • All materials including consumables Equipment when necessary, • jobs staged and ready to load, • parking for your employees Minimum Requirements: • MUST Possess Valid Driver's License, • MUST have Previous Fencing Experience, • Pass background check (no felonies or sex offenses), • Pass drug screening, • Have your own Truck/Trailer and Tools (if not renting them), • Physical fitness for heavy lifting, working in the heat, • MUST carry liability insurance and workers compensation insurance. The Superior candidate will: • Be organized and detail-oriented with a stable job history, • Have a positive attitude with excellent customer service skills If you are interested in the Sub Contractor position, please call the office at (585-351-2773) and we will send you a link to apply or apply directly at "We are an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status."

Job Description Position:Metal Finisher Reports to: Plant Manager Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning QS:9000, ISO:9002, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: Grinds and smooths surfaces of items, while also possessing the ability to read and comprehend simple instructions, short correspondence and memos. Ability to write simple correspondence. Minimum Qualifications: • High school diploma or general education degree (GED), • Minimum one year or more experience, • Fluent in verbal and written English Specific Duties: • Examines and feels surface of work piece for defects., • Move grinder over surface of work piece to remove scratches and imperfections, • Polish ground areas with finer abrasive to produce smooth, unmarred surface, • Replace worn abrasive disks, wheels, and belts, • Selects grade of abrasive belt, wheel, or disk according to specifications, • Ability to operate material handling equipment Physical Demands: • Must be able to lift up to 50 lbs regularly, • Requires frequent bending, stooping, squatting, pushing and pulling of parts and part containers, • May be required to stand for long periods of time, • May involve some repetitive motions, • Due to the open environment of the warehouse, must be able to work in various weather and temperature conditions to include extreme heat, humidity and cold This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Job DescriptionDescription: At American Packaging Corporation (APC), you’ll find the packaging career you’ve been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC’s longstanding success is fueled from the inside out. We’re constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America’s awards for 12 years in a row. It’s how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: COE SUMMARY: Provide engineering duties as assigned by Plant Engineer and/or Plant Manager. Responsible for overseeing new equipment installations as well as modifications to existing equipment as assigned by Plant Engineer. Maintain PLC, HMI, and Drive programming software. Provide detail drawings of parts that need to be manufactured in our shop or by an outside machine shop. Oversee plant engineering duties in the Plant Engineer’s absence. Troubleshoot and repair equipment problems that effect productivity of the manufacturing group. Be involved with process improvements providing input in production problem solving. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: • Providing detail drawings., • Active in troubleshooting electrical, electronic, and mechanical problems in a manufacturing environment., • Well versed in PLC and HMI programming., • Well versed in digital and analog AC/DC drive design, programming and installation., • Well versed in computer (PC) fundamentals, including communication protocols, Microsoft Operating systems and Microsoft Office software., • Manage new equipment installations and startups., • Design, install and startup equipment modifications., • Negotiate price and purchase equipment and services as needed., • Draft capital expenditure requisitions - gather information for justification of capital, obtain cost of capital items., • Fill out project item listings., • Provide managerial input to the maintenance department as well as outside contractors., • A fundamental understanding of regulations including OSHA, NFPA, NEC, EPA, and WDNR., • Responsible for working safely and being a safety leader. Directly supervises employees in the Maintenance Department in the absence of the Maintenance Manager. Carries out supervisory responsibilities as necessary in accordance with the organization's policies and applicable laws. Responsibilities include training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. Requirements: QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and EXPERIENCE: A bachelor's degree, Associate's degree, or equivalent in a related field is required. An additional year of relevant full-time experience and/or training is preferred. LANGUAGE SKILLS: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS: Ability to work with mathematical concepts such as Ohm’s Law, probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. REASONING ABILITY: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. PHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel. The employee frequently is required to sit and talk or hear. The employee is occasionally required to stand; walk; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and taste or smell. The employee must occasionally lift and/or move more than 100 pounds. WORK ENVIRONMENT: While performing the duties of this job, the employee is occasionally exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; extreme cold; extreme heat; risk of electrical shock; risk of radiation; and vibration. The noise level in the work environment is usually moderate. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: .

Job DescriptionCompany Description Rexel USA is one of the largest distributors of electrical products, data communication, and related supplies in the United States. Rexel USA operates its electrical distribution business in the United States through eight Regions that go to market under various banner and trade names, including Rexel, Rexel Automation, Gexpro, Mayer, and Platt Electric Supply. In addition to an online store, Rexel USA has a distribution network of over 460 warehouse storefront locations throughout the U.S. Job Description Summary: The Automation Product Specialist is responsible for assisting Outside sales to drive sales of automation products and solutions to customers. Responsible for understanding the features and benefits of the products and solutions, providing product knowledge and addressing customer inquiries. The Automation Product Specialist's goal is to build strong relationships with customers, identify their needs, and recommend the most suitable products and solutions to meet those needs. What You'll Do: • Meet or exceed sales goals of assigned technology offer, • Lead and support sales efforts with key targets, key customers, and key opportunities in assigned product and/or area/region, • Provide technical support for internal and external customers via on-site visit, phone, and email. This could include, but is not limited to troubleshooting products, finding technical documentation and specifications, product selection and, other requested activities, • Establish relationships with sales and customers to better understand sales potential, • Work with sales to establish joint strategies and activities, • Provide expert knowledge to Sales and Branch teams to facilitate quoting, order entry, and order expediting, • Create and present technical and commercial training for internal and external customers, • Describe or demonstrate product to customers, • Acquire, use, and continuously develop personal technical knowledge, • Provide oral and/or written quotations, proposals or estimates of prices, scope of work, terms, and delivery, • Work with prospective customers to move projects through the sales cycle to conclusion, • Properly prepare for sales calls, customers events, etc., • Work with Purchasing on proper inventory of high-tech products and identify any potential obsolesce problems, • Perform other duties as assigned Job Duties Disclaimer: The information contained in this job description is intended to describe the essential job functions required of those assigned to this job. It is not intended to be an exhaustive list of all responsibilities, duties, knowledge, skills, and abilities needed to perform the job. Please note that management retains the right to assign or reassign duties and responsibilities to this job at any time. The ability to competently perform all the essential duties of the position, with or without reasonable accommodation, demonstrate commitment to effective customer service delivery, integrity, and the ability to work productively as a member of a team or work group are basic requirements of all positions at Rexel USA. Qualifications • 5+ years of experience, • Electrical distribution industry or related experience required, • Valid Driver’s License, • High School or GED - Required, • 4 Year / Bachelor's Degree - Preferred, • Intermediate/advanced computer skills, specifically with Excel/Outlook/Word, • Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, blueprints, or governmental regulations, • Ability to write reports, business correspondence, and procedure manuals, • Ability to effectively present information and respond to questions from small groups of managers, clients, customers, and the general public, • Ability to practice good interpersonal relations, using tact, courtesy, a positive attitude toward customers and co-workers, pleasant communication etiquette, and a general attitude as a representative of goodwill on behalf of the company at work or during company travel, • Ability to develop and present specialized instruction concerning the specific high-tech equipment in the assigned area of responsibility Additional Information Physical Demands: • Sit: Must be able to remain in a stationary position - Frequently – 21% to 50%, • Walk: Must be able to move about inside/outside office or work location - Frequently – 21% to 50%, • Use hands to finger, handle, or feel: Operates a computer and other office machinery - Constantly – at least 51%, • Stoop, kneel, crouch, or crawl: Must be able to crouch down to stock shelves, pick up boxes, or position oneself to maintain computers in the lab/under desks/in server closet - Occasionally – up to 20%, • Climb or balance: Must be able to ascend/descend on a ladder, forklift, pallet jack, or other warehouse equipment - Occasionally – up to 20%, • Talk, hear, taste, smell: Must be able to use senses to effectively communicate with co-workers and clients and detect hazardous conditions - Constantly – at least 51% Weight and Force Demands: • Up to 10 pounds - Occasionally – up to 20%, • Up to 25 pounds - None, • Up to 50 pounds - None Working Environment: • Exposed to unpleasant or disagreeable physical environment such as high noise level and/or exposure to heat and cold - Occasionally – up to 20%, • Exposed to electrical hazards; risk of electrical shock - None, • Handles or works with potentially dangerous equipment - None Disclaimer: “Rexel USA (A VEVRAA Federal Contractor), and its affiliated companies, is an EEO/Disabled/Veterans employer. All qualified candidates will receive consideration for employment without regard to any characteristics protected by law.” Our Benefits Include: • Medical, Dental, and Vision Insurance, • Life Insurance, • Short-Term and Long-Term Disability Insurance, • 401K with Employer Match, • Paid vacation and sick time, • Paid company holidays plus flexible personal days per year, • Tuition Reimbursement, • Health & Wellness Programs, • Flexible Spending Accounts, • HSA Accounts, • Commuter Transit Benefits, • Additional Optional Insurance such as Pet Insurance, Legal Assistance, Critical Illness, Home and Auto Insurance to name a few., • Employee Discount Programs, • Professional Training & Development Programs, • Career Advancement Opportunities – We like to promote from within Our goal is to create a workplace where everyone feels respected, valued, and empowered to succeed as we understand that our success and innovation is enhanced by an inclusive and diverse workforce. Rexel USA (A VEVRAA Federal Contractor), and its affiliated companies, is an EEO/Disabled/Veterans employer. All qualified candidates will receive consideration for employment without regard to any characteristics protected by law.

Job DescriptionDescription: Advance Your Career in Environmental Science – Make a Real-World Impact Are you an Environmental Specialist, Environmental Scientist, or Environmental Engineer looking to take your career to the next level with hands-on, impactful work? Fisher Associates is seeking an Environmental Specialist II to join our mission-driven team dedicated to environmental consulting, site assessments, remediation, and regulatory compliance. In this role, you’ll lead and support Phase I and II Environmental Site Assessments (ESAs), oversee cleanup and remediation projects, and ensure compliance with local, state, and federal environmental regulations. Your expertise in environmental investigations, remediation strategies, and sustainability practices will directly protect natural resources and build stronger, more sustainable communities. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Plan and execute Phase I and II Environmental Site Assessments (ESAs), due diligence investigations, and environmental compliance audits in accordance with ASTM standards., • Design and implement site remediation programs including soil, groundwater, and vapor mitigation., • Prepare site characterization reports, corrective action plans, soil management plans and site-specific health and safety plans., • Perform field inspections, including sampling of soil, water, vapor, and air; well monitoring; and operation and maintenance of remediation systems., • Oversee field activities such as drilling, sampling, and remediation system installation with minimal supervision., • Coordinate effectively with laboratories for sample submission and chain-of-custody documentation., • Interpret environmental data and prepare technical reports, analytical data tables, plume mapping, and collaborate on GIS mapping for project documentation and regulatory submittal., • Monitor, collect data for, and optimize ongoing remediation systems., • Coordinate with regulatory agencies, subcontractors, and clients., • Serve as Site Safety Officer, ensuring projects comply with applicable environmental laws and health and safety standards, including any required training requirements., • Collaborate across multidisciplinary teams to deliver integrated environmental solutions., • Ensure QA/QC standards are met throughout the project lifecycle., • Provide technical support for proposals, cost estimates, and remediation planning., • Support abatement-phase construction administration., • Conduct compliant asbestos building inspections, quantifications, draft reporting, and project air monitoring., • Conduct compliant materials inspections for lead paint, PCB-caulk, mold, and universal waste. Your Impact Matters, Your Career Thrives. Work on engaging environmental projects as an Environmental Specialist II and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Eligible for Straight-time Overtime, • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promise any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid #LI-CA1 Requirements: What You Bring, Your Expertise as an Environmental Specialist II • B.S. in Environmental Science, Geology, Engineering, or related field., • Minimum of 5-10 years of relevant experience in site remediation and environmental consulting., • Knowledge of EPA and state remediation regulations (CERCLA, RCRA, NYSDEC, PADEP, etc.)., • Experience with remediation technologies (e.g. ISCO, SVE, bioremediation, excavation)., • Strong analytical and problem-solving skills., • Excellent communication and report-writing abilities., • OSHA HAZWOPER 40-Hour with current 8-Hour OSHA HAZWOPER annual refresher., • NYSDOL-Certified Asbestos Building Inspector strongly preferred., • NYSDOL certifications including Asbestos Air Monitor, Project Designer, or Mold Assessor a plus., • Willing to travel and work 10+ hour field days in peak season., • Proficient in Microsoft Office, AutoCAD, Bluebeam, PDF; experience with ArcGIS/View, Survey123 preferred., • Proven knowledge of sampling methods and environmental regulations and guide documents., • Ability to read plans and understand building systems (HVAC, insulation, products)., • Experience reading and understanding GIS mapping, contour mapping, and data driven plume mapping., • Ability to direct contractors, drillers, and other field subcontractors during field projects., • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Proven ability to deliver quality work and solve problems with critical thinking and sound judgment., • Driven to take ownership of projects, prioritize tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth, • Highly adaptable and proactive in meeting deliverables and deadlines, • Committed to building trust and collaboration through integrity, respect, and active listening., • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Must be able to lift up to 25 pounds at a time., • Ability to stand and walk for long periods of time and distance., • Must be able to travel to various project sites., • Must be able to access and navigate construction sites and job areas., • Must pass respirator medical clearance and respirator fit test., • Must be able to wear a respirator for required work, occasionally for extended periods of times., • Must be comfortable wearing project-specific level of Personal Protective Equipment (PPE) such as Tyvek suits, nitrile gloves, safety glasses, hard hat, and steel toe boots.

Job Description RED-Rochester is a multi-utility generation plant and district energy supplier to one of the world’s most comprehensive industrial parks: the Eastman Business Park. Supporting a 1,200-acre campus, RED-Rochester has the utilities, infrastructure, technical services, support services, space and complementary regional resources to benefit a wide range of industry verticals. We are seeking an Utility Systems Intern/COOP who enjoys the challenge of learning operation of Steam and Power generation while ensuring a safe and compliant work environment. Our infrastructure consists of a blend of classic and modern industrial assets and requires a person with an interest in industrial and utility systems – able to work collaboratively with mentors and employees to achieve success. Essential Duties and Responsibilities: • The successful candidate will get firsthand experience about how we produce steam to drive turbines and generate electricity., • The operation team is responsible for the safe, efficient operation of the boiler steam generation, turbine-generators, demineralized water, compressed air systems, along with all the auxiliary equipment associated with these systems., • RED is also currently involved in the design, specification, and refurbishment of a used, GE Frame 6 Gas Turbine Generator Unit, and Heat Recovery Steam Generator to increase EBP’s generation capacity., • Currently majoring in Electrical, Mechanical or Industrial Engineering, Power Systems Operations, Thermodynamics, or related field., • Eagerness to contribute to our team-oriented environment., • Excellent leadership, communication (written and verbal) and interpersonal skills., • While performing duties of job, Employee is occasionally required to bend, lift, walk, or carry equipment. May occasionally lift and or move up to 50 pounds.

Job Description Job Summary: Performs precision and intricate hand and machine assembly of finished product using equipment and methods. Essential Duties and Responsibilities: • Assembles complex components and inspects connections for correct tolerance and fit., • Fasten parts and subassemblies per specifications provided by customer., • Operates various assembly and packaging equipment including lathes, mills, sonic welders, hot stamper, heat stakers, auto baggers., • Will read and interpret customer prints and specifications., • Performs various types of machine and manual assembly., • Identifies and resolves assembly and packaging issues and notifies Floor Lead/Supervisor., • Inspects assembled parts for any imperfections as per customer specifications, may include software test., • When requested, may work on special projects and various related assignments., • May be required to compile various reports and data tracking., • May be required to work in various areas of operations when necessary. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee must have excellent hand/eye coordination, and able to handle a variety of size pieces. The employee is occasionally required to reach with hands and arms. The employee is occasionally required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 40 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from moderate to loud. Education, Skills and Experience: • High school diploma or GED required, • Minimum 2 years experience in small parts assembly or equivalent job experience, • Ability to read and interpret blueprints, • Familiar with various trade tools, • Attention to detail, • Math skills, • Work independently with minimal supervision Syntec Optics is an Equal Opportunity/Affirmative Action Employer. Applicants are free to apply without regard to race, color, religion, sex/gender, gender identity, sexual orientation, marital status, pregnancy, genetic information, citizenship status, national origin, age, disability or veteran status or any other Federal or State legally protected classes. Read our EOE Policy Statement.

Job Description Job Title: Repair Table Operator/ Titulo profesional: Operador de Mesa de Reparación Division: General Labor / Division: Trabajo General Department: Operations / Departamento: Operaciones Reports To: Shift Supervisor / Reportar a: Supervisor de Turno Summary: Repairs pallets using quality specifications by performing the following duties. Resumen: Reparar las paletas utilizando las especificaciones de calidad mediante la realización de las siguientes funciones: Duties and Responsibilities include the following. Other duties may be assigned. Funciones y Responsabilidades incluyen lo siguiente. Otras funciones pueden ser asignadas. 1. Operates repair equipment per standard operating procedures.* Operar equipo de reparación de acuerdo con los procedimientos operativos estandar.* 2. Meets production quotas within a reasonable training/retraining time period.* Cumplir con las cuotas de producción dentro de un entrenamiento razonable/ periodo de tiempo para re-entrenamiento.* 3. Ensures housekeeping of equipment and surrounding area is acceptable per standard operating procedure.* Asegurar la limpieza de los equipos y el área de los alrededores es aceptable por procedimiento operativo estándar.* 4. Follows safety standard operating procedures and maintain proper use of all personal protective equipment at all time of operation.* Seguir los procedimientos operativos de seguridad estándar y mantener el uso correcto de todos los equipos personales de protección en todo momento de la operación.* 5. Generates accurate production reporting for supervisor.* Generar informes de producción precisos para el supervisor.* 6. Maintains possession and good condition of assigned tools and nails.* Mantener posesión y la buena condición de herramientas y clavos asignados.* 7. Alerts supervisor of potential maintenance and/or safety concerns.* Alertar al supervisor de problemas potenciales de mantenimiento y/o de seguridad.* 8. Receives and follows designated job processes and safety trainings.* Recibir y seguir procesos designados de trabajo y entrenamiento de seguridad.* 9. Performs assigned preventive maintenance of equipment.* Llevar a cabo el mantenimiento preventivo de los equipos asignados.* 10. Performs other related duties as assigned. Realizar otras tareas afines que le sean asignadas.* Qualifications: / Cualificaciones To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Para realizar este trabajo con éxito, un individuo debe ser capaz de realizar cada función esencial satisfactoriamente. Los requisitos enumerados a continuación son representativos de los conocimientos, destrezas y/o la habilidad necesaria. Adaptaciones razonables se pueden hacer para permitir a las personas con discapacidad llevar a cabo las funciones esenciales. Language Ability: / Habilidad de Lenguaje: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Habilidad para leer y comprender instrucciones simples, correspondencia corta, y notas. Habilidad para escribir correspondencia simple. Habilidad para presentar con eficacia la información en uno – a – uno y grupos pequeños de situaciones para los clientes, clientes y otros empleados de la organización. Math Ability: /Habilidad de las Matemáticas: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Habilidad para sumar, restar, multiplicar, y dividir en todas las unidades de medida, usando números enteros, fracciones comunes, y decimales. Habilidad para calcular tarifas, relación, y el porcentaje y dibujar e interpretar graficas de barras. Reasoning Ability: / Habilidad de Razonamiento: Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Habilidad para aplicar sentido común y el entendimiento para llevar a cabo detallado pero no involucrado instrucciones escritas u oral. Habilidad para bregar con problemas envolviendo algunas variables concretas y situaciones estandarizadas. Education/Experience: / Educacion/ Experiencia: High school diploma or general education degree (GED); or equivalent combination of education and experience. Diploma de Escuela Secundaria o un grado en educación general (GED); o una combinación equivalente de educación y experiencia. Equipment: / Equipo: • Hammer / Martillo, • Nail gun / Pistola de clavos, • Sawzall / Sawzall, • Screw gun / Pistola de tornillos Physical Demands: / Demandas Físicas: *Essential Function © 2016 Millwood, Inc. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands, and reach with hands and arms. The employee is frequently required to walk and talk or hear. The employee is occasionally required to stoop, kneel, crouch or crawl. The employee must regularly lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, and ability to see color. Las demandas físicas descritas aquí son representativas de las que se deben cumplir por un empleado para realizar con éxito las funciones esenciales de este trabajo. Adaptaciones razonables se pueden hacer para permitir a las personas con discapacidad realizar las funciones esenciales. Mientras desempeñan los deberes del trabajo, se requiere regularmente del empleado pararse, usar las manos y alcanzar con los brazos y manos. Con frecuencia se requiere del empleado caminar, y hablar o escuchar. Se requiere del empleado ocasionalmente agacharse, arrodillarse, agacharse o arrastrarse. El empleado debe levantar regularmente y/ o mover hasta 75 libras. Habilidades específicas de visión requeridas para este trabajo incluye visión cerca, la visión de lejos, visión periférica, y la habilidad para ver el color. Work Environment: / Ambiente de Trabajo: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to work near moving mechanical parts. The employee is frequently exposed to fumes or airborne particles. The employee is occasionally exposed to wet or humid conditions (non-weather), outdoor weather conditions, extreme cold (non-weather), and extreme heat (non-weather). Las características del ambiente de trabajo que se describen aquí son representativas de las que un empleado encuentra en el desempeño de las funciones esenciales de este trabajo. Adaptaciones razonables se pueden hacer para permitir a las personas con discapacidad realizar las funciones esenciales. Mientras desempeñan los deberes del trabajo, el empleado es expuesto regularmente a trabajar cerca de partes mecánicas en movimiento. El empleado es expuesto frecuentemente a gases o partículas en el aire. El empleado es ocasionalmente expuesto a condiciones húmedas o mojadas (no el clima), condiciones climáticas externas, extremadamente frio (no el clima), y el calor extremo (no el clima). The noise level in the work environment is usually loud. El nivel de ruido en el ambiente del trabajo es usualmente alto.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Health insurance Job Title: Machinist/Fabricator Company: GH Induction Atmospheres, Rochester, New York About Us: We design and manufacture customized, turn-key induction heating systems for Industrial heat treating, brazing, welding, hardening and general-purpose heating. Job Summary: We are seeking a skilled Machinist to operate a variety of machines to perform precision machining operations. The ideal candidate will have experience with manual and conversational programmed machines (Prototrak). In addition, braze, solder and fabricate copper coils for our automated induction machines. Also, a little TIG welding is a plus. Responsibilities: • Set up and operate manual lathe and Prototraks to perform precision machining operations, • Braze and solder cooling plates for water cooled buss work., • Manufacture copper coils assemblies, • Read and interpret technical drawings and blueprints to determine machining requirements, • Select and install tooling and fixtures to ensure proper alignment and positioning of workpiece, • Monitor machine operation and adjust settings as necessary to ensure quality and accuracy of finished product, • Perform routine maintenance on machines to ensure optimal performance, • Inspect finished product to ensure compliance with specifications and quality standards, • Collaborate with other team members to identify and implement process improvements Requirements: • High school diploma or equivalent, • Completion of a machinist apprenticeship program or equivalent experience, • Experience with manual and conversational machines, • Ability to read and interpret technical drawings and blueprints, • Strong attention to detail and ability to work with precision, • Excellent problem-solving skills, • Ability to work independently and as part of a team, • Good communication and interpersonal skillsPhysical Demands:, • Ability to stand for extended periods of time, • Ability to lift up to 50 pounds, • Ability to work in a noisy environmentWork Environment:, • Manufacturing facility, • Exposure to machinery, noise, and dustWhat We Offer:, • Competitive salary: $25-$32 per hour depending on experience., • Comprehensive benefits package, including health and life insurance, HSA account, 401K match, 2 weeks paid vacation and 10 paid holidays per year., • We only run a daytime shift Mon-Fri from 8am to 4:30pm, with the possibility of overtime depending on workload., • We are an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status or disability status.

Job Description PROCESS ENGINEER Celebrating over 50 years of excellence, Precise Tool & Manufacturing Inc. is a family-owned, Rochester-based leader in advanced CNC machining and custom manufacturing. Our 280,000 sq. ft. facility houses over 160 state-of-the-art CNC machines. With 50 high-speed 4-axis horizontal machines, we deliver exceptional efficiency and accuracy for intricate, multi-sided machining, allowing us to meet the most demanding production requirements with speed and precision. We are a trusted supplier across industries such as aerospace, defense, medical, energy, and power generation, recognized for our dedication to quality, safety, and innovation. At Precise Tool, we foster a collaborative work environment where employees are valued and supported. We offer competitive compensation, comprehensive benefits, and opportunities for professional development. Join our team and be part of a company that combines cutting-edge technology with a commitment to excellence and employee success. JOB SUMMARY Under the direct supervision of the Engineering Manager, the Process Engineer is responsible for performing a variety of manufacturing processes and engineering functions. ESSENTIAL FUNCTIONS: • Write manufacturing processes and enter in Epicor software. Work with the engineering group on machine processes and tooling., • Interface with department supervisors and machinists on a regular basis., • Utilize customer supplied CAD files when available to process manufacturing plan., • Utilize CAD to create work holding and fixturing layouts., • Interface with CNC programmers., • Notify Tool Crib of upcoming jobs., • Develop queuing system for kits ready to set up., • Verify tooling is available for jobs and ensure back-ups are available., • Coordinate all projects as they progress through the shop., • Monitor profitability as jobs are running., • Expedite any materials and components for jobs to ensure jobs stay on schedule., • Complete routing for customer jobs., • Work with engineering group and manufacturing to develop tooling and fixturing concepts for all new work., • Update all processes during and after production., • Work with manufacturing to ensure processes are being followed, and to incorporate time saving methods when suggested., • Investigate and provide disposition on discrepant/quality issues for jobs assigned., • Review assigned jobs with department manager at hand-off and when ready to move to the floor., • With a quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved., • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes., • Excellent written and oral communication skills., • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible., • Familiarity with all aspects of manufacturing including material specifications, turning, milling, heat treat, welding, plating and painting., • Attention to detail., • Customer focus., • Analytical and reasoning skills., • Proficiency with 3-D modeling software packages, Autodesk Inventor., • High School Diploma or equivalent required, • College degree preferred, but not required, • 10 years of machining or manufacturing experience required, • Vacation, • Sick Days, • Paid Holidays, • Health Insurance, one plan is 100% employer paid!, • Dental Insurance, • Vision Insurance, • Life Insurance, also 100% employer paid!, • 401(k) Plan According to the New York Pay Transparency law, pay range for this job is $29.00 - $43.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Precise Tool & Manufacturing Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Precise Tool & Manufacturing Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources at (585) 247-0700 Ext. 203.

Job Description Responsibilities The following is a list of at least some of the essential job functions of the position. Management may assign or reassign duties and responsibilities at any time in its discretion. Procurement & Sourcing • Source and purchase raw materials, bar stock, and components based on production schedules and forecasts., • Identify, qualify, and manage suppliers for secondary services such as milling, grinding, sorting, plating, heat treat, and passivation., • Negotiate supplier contracts, pricing, and lead times to optimize cost and delivery performance., • Collaborate with engineering and operations to ensure materials meet specifications and certifications (ITAR, DFARS, RoHS, etc.)., • Maintain supplier performance metrics and ensure alignment with quality and delivery expectations. Production Planning & Scheduling • Create and manage daily, weekly, and monthly production and procurement plans using Epicor/Kinetic., • Review and analyze demand forecasts, capacity constraints, and lead times to optimize workflow., • Ensure inventory accuracy, monitor material shortages, and adjust schedules proactively., • Support continuous improvement initiatives in planning, material flow, and supplier efficiency. ERP & Data Management • Maintain accurate and current information within Epicor/Kinetic ERP, including part data, BOMs, purchase orders, and inventory transactions., • Develop and utilize ERP reports to support decision-making for production, purchasing, and cost control., • Coordinate with IT and operations teams to improve data accuracy and system utilization. Inside Sales & Quoting Support (as needed) • Collaborate with the inside sales team to provide timely cost data and material pricing for low-level quotes., • Support customer RFQs with vendor quotes and lead time information., • Assist with maintaining part and pricing data, quote history, and customer records in ERP or CRM systems., • Provide administrative and analytical support to the sales and estimating process as needed. Qualifications • Bachelor’s degree preferred, or equivalent experience (5–7 years) in manufacturing procurement and planning., • Strong proficiency with ERP/MRP systems—Epicor/Kinetic experience highly desired., • Demonstrated experience in sourcing raw materials and managing outside processes (milling, plating, heat treat, etc.)., • Knowledge of machining, manufacturing principles, and production scheduling., • Excellent communication, negotiation, and interpersonal skills., • High attention to detail and ability to manage multiple priorities in a fast-paced environment. Company DescriptionBuell is a family-owned company started in 1966 By Richard Lawton and Ernie Corts, providing turnkey solutions for customer looking for American made, high quality machine parts. Buell’s niche started out with Davenport Model B screw machines and we have expanded our operations to incorporate CNC turning services. In this new generation of Buell Leadership, it looks to grow and expand it's portfolio of capabilities with expanding business units.Buell is a family-owned company started in 1966 By Richard Lawton and Ernie Corts, providing turnkey solutions for customer looking for American made, high quality machine parts. Buell’s niche started out with Davenport Model B screw machines and we have expanded our operations to incorporate CNC turning services. In this new generation of Buell Leadership, it looks to grow and expand it's portfolio of capabilities with expanding business units.

Job DescriptionDescription: Fisher Associates, P.E., L.S., L.A., D.P.C. has created an internship program to engage college students that are ready to get their foot in the door and gain hands on experience! By using the skills and knowledge gained from academic study and combining with an internship, the student's transition from student to professional is enhanced. Students must be organized, self-motivated, and dependable. We have multiple sectors/service lines in which an internship can be completed as selected by the student. Under direct supervision, the student will perform routine tasks and work on a wide variety of projects gaining a well-rounded learning experience. Who: Students currently enrolled in a Civil Engineering degree program (or related field) What: Obtain hands-on professional work experience with our Transportation, Land Development or Energy groups in various tasks related to design, analysis, and implementation of projects. Where: At any of our office locations! When: Fisher Associates accepts internship applications year-round. Internship timeline is dependent on manager needs and student schedule. The primary function of this role is responsible for, but not limited to, the following: • Exhibit behaviors that align with the Fisher Values: Aspire to Excellence, Teamwork and Respect, Owning our Results and Empowered Employees., • Establish and maintain strong client relationships adhering to the Fisher Clientship philosophy., • Perform engineering analysis and design., • Prepare cohesive and organized engineering calculations., • Assist technical staff with day-to-day design tasks for several types of projects., • Conduct basic engineering functions including design calculations and cost estimating under supervision., • Collaborate as a member of the team to realize project deliverables and deadlines., • Prepare construction specifications under direct supervision., • Assist senior engineers or designers with organizing/preparing reports, studies, or bid packages., • Participate in site visits and field inspections to gather data and assess project conditions, as needed. Fisher Associates, P.E., L.S., L.A., D.P.C. is a consulting engineering and professional services firm serving the Transportation, Land Development and Energy market sectors. Our comprehensive services include landscape architecture, planning, engineering, environmental, survey, GIS and construction representation. Fisher Associates, P.E., L.S., L.A., D.P.C. is headquartered in Rochester NY, with eight offices throughout NY, PA and TX. The culture at Fisher is friendly, respectful, and a true team environment. We own our responsibilities and results, continuously seeking to improve and empower our employees. Requirements: Education & Experience • Currently pursuing a bachelor’s degree in Civil Engineering, Civil Engineering Technology or related field., • Strong academic performance in relevant coursework., • Aspire to excellence, consistently seek to improve, and demonstrate high quality work at all levels., • Team player: collaborate effectively at all levels; treat coworkers, clients and vendors with respect in all interactions; seek to listen effectively, understand others, and build trust., • Own and accept responsibility for results., • Honest, transparent, and trustworthy., • Proactive, self-motivated, and eager to learn., • Strong critical thinking and problem-solving skills., • Ability to consistently demonstrate sound judgement., • Excellent and professional communication skills both written and verbal., • Excellent organizational, project management and time management skills., • Ability to work in a fast-paced environment and manage multiple tasks simultaneously., • Strong attention to detail., • Exhibit flexibility with assignments, workflow, or project changes., • Listen and respond to feedback in a positive manner. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Prolonged periods sitting at a desk and working on a computer., • Must be able to lift to 15 pounds at a time., • Must be able to travel to various project sites., • Must be able to access and navigate construction sites and job areas., • Ability to transverse uneven grounds. Salary Range: $23/hour Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Fisher Associates embraces a family-feel culture and welcomes all newcomers with open arms. Fisher Associates does not discriminate in hiring or employment on the basis of age, race, creed, color, national origin (including ancestry), religion, gender or sex, sexual orientation (including transgender status, gender identity or expression), pregnancy (including childbirth, lactation, and related medical conditions), disability, reproductive health decision making (including, but not limited to, the decision to use or access a particular drug, device, or medical service), marital status, partnership status, caregiver status, domestic violence victim status, familial status, military status, unemployment status, genetic information (including genetic characteristics), citizenship or immigration status, or any other protected status under federal, state, or local laws.

Role Overview We are looking for an Electrical and Instrumentation Mechanic to Support our Advanced Material & Chemicals division in Rochester, NY. As an Electrical and Instrumentation Mechanic you will be responsible for the following job functions: • Electrician & Instrumentation skilled trade service to provide multi-discipline capability to repair, maintain, install and make improvements on film manufacturing equipment, complex processing equipment, chemical processing equipment, building general systems (includes instrumentation, pneumatics, hydraulics, controls (PLC's & distributed control systems (DCS), and a wide range of electrical components), • Ability to calibrate process control instruments tight tolerances using sophisticated calibration equipment., • Ability to achieve a high level of expertise to effectively troubleshoot and repair equipment, including root cause analysis., • Some experience or expertise in mechanical, piping, HVAC equipment and controls., • Includes maintenance of motors, breakers, starters, variable speed drives, process controls devices, heat tracing, lighting, etc., • Calibrate, align and make adjustments with test equipment and measurement equipment., • Installation of conduit, wiring, switches, relays, lighting, circuit breakers using power tools and hand tools, • Install upgrades to enhance or replace outdated control systems., • Execute preventive and predictive maintenance programs., • Data entry and report writing including ISO documentation., • Working knowledge of Microsoft Office and maintenance software tools., • Ability to change based on priorities Requirements: • Dependable, maintain good attendance, • Maintain a clean work area and operate in a safe manner at all times., • Detail orientated Team Player, • Strong electrical and/or instrumentation training and demonstrated skills/experience, • Must demonstrate effective analytical troubleshooting skills, • Able to read electrical, instrument and machine drawings, • Able to read/modify PLC programs to troubleshoot equipment problems, • Understanding of new electrical codes for hazardous environments (flammable liquids), • Ability to work effectively with minimal supervision, • Excellent safety record - places safety and environment as top priority in all work, • Knowledge of Lock Out / Tag Out, • Effective communication skills - daily communications with leaders, maintenance planner, technical staff, engineering and operations as needed., • Significant walking or other means of mobility., • Ability to work in a standing position for extended periods of time (up to 8 hours)., • Ability to work off of ladders or scaffolding, in some awkward positions, • Indoor and outdoor work assignments, • Wear protective clothing and/or Personal Protective Equipment required by the work environment or governmental regulations. Qualifications: • HS diploma, and a 2-year degree or some level of instrumentation, electrical or demonstrated trade experience., • Varying schedule to include evenings, holidays, weekends and extended hours as business needs dictate. EOE Policy Statement: All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or disability. Estimated Salary: $32.00 - $40.00 Experience Level: 5-10 Years Requisition ID: 1567

Job Description OVERVIEW: RTS Access is seekinga Full-Time bus Washer to join our team! This position is responsible for: • Cleaning and washing the interior and exterior of transit buses, • Fueling buses HOURLY RATE: $19.04 BENEFITS INCLUDE: • Staying Healthy: Medical, Dental,and Vision Care,Health Reimbursement Account (HRA), • Feeling Secure: Disability Insurance, Pension Plan, NY State Deferred Compensation Plan, Life & Accidental Death & Dismemberment (AD&D) Insurance, Accident Insurance, Group Specified Disease Insurance and Hospital Insurance, • Work-Life Balance: Paid Time Off (PTO), Employee Assistance Program, Paid Holidays, Verizon Wireless Discount, Wellness Center, Employee Wellness Program, Public Service Loan Forgiveness (PSLF), Culture & Inclusion Council, BJ's Wholesale Club Discount, and more! LOCATION:588 Trabold Rd. Rochester, NY 14624 CURRENT AVAILABLE SHIFT:Saturday to Wednesday 4:00 PM to 12:00 AM, Thursday & Friday off SCOPE OF WORK & PHYSICAL DEMANDS: Work is physically demanding, using power and hand tools. The work is performed in an outside environment regardless of the weather. Applicants must have the ability to: • Work in various temperatures, including thesummer heat and winter cold., • Work in a noisy work environment., • Hear oncoming vehicles, horns, and other verbal signals in and between buses without a line of sight., • Perform work at a high rate of speed., • Work in a dark and dimly lit work environment., • Work in a confined space., • Follow directions., • Work in wet and slippery conditions., • Stand for long periods of time on hard and uneven surfaces., • Move from a standing position to stooping multiple times, the ability to bend, squat, crouch, stretch, lift arms and hands over head., • Lift up to 50 pounds., • Kneel on wet, flat, hard surfaces., • Walk and move quickly through buses for several hundred feet., • Be dependable, arrive to work on time; honest, and be able to work as a team. REQUIREMENTS: • Valid Driver's license (will be required to obtain a Class B permit with passenger endorsement prior to your start date) Additional Information: Rochester Genesee Regional Transportation Authority (RGRTA) has a zero-tolerance drug and alcohol policy for all employees in accordance with state and federal law. All internal and external applicants will be required to undergo drug testing before employment and will be subject to further drug and/or alcohol testing throughout their employment in accordance with the Department of Transportation (DOT) and the Federal Transit Administration (FTA) regulatory requirements. Rochester Genesee Regional Transportation Authority (RGRTA) is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship and/or immigration status, sex, sexual orientation, gender identity, pregnancy, age, veteran status, disability, genetic information, or any other protected characteristic under applicable federal or state law. RGRTAwill make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities, unless the accommodation would impose an undue hardship on the operation of our business Pursuant to Federal Transit Administration regulations, all applicants for employment in safety-sensitive positions must be given a pre-employment drug test. An applicant may not be assigned safety-sensitive functions unless the individual has a verified negative test result. RTS is required by law to test for various substances, including cocaine, amphetamines, opioids, PCP, and marijuana metabolites. Please be advised that marijuana stays in the system for an extended period of time, sometimes more than 30 days, and can cause a positive test result long after use.

Job Description Team Member - Dave's Hot Chicken - Irondequoit, NY *** $17 an Hour Starting Wage, plus Huge Growth Opportunities Summary: The Team Member is responsible and accountable for performing specific tasks and duties assigned within the Restaurant including Guest Service, Food prep, Restaurant Cleanliness and Teamwork. Job Expectations: The Team Member will work productively in a fast-paced environment, maintain a fast speed of service, interact with Guests, work closely with other Team Members to complete tasks, follow all safety and security procedures, and conduct other duties assigned by the Restaurant Management Team. Duties: • Follow the steps outlined in the DHC Training Program to learn new skills, duties, and responsibilities, • Abide by the rules and direction given by the Restaurant Management Team and refrain from insubordination, • Communicate to their immediate supervisor when additional training guidance and practice is needed, • Understand how each job responsibility impacts Guests, the Team, and overall Restaurant Operations and success, • Greet Guests, record orders, and serve food and beverages with a consistently positive and helpful attitude, including answering questions, • Work together with other Teammates to prepare items on the DHC menu while following cooking instructions, safety procedures, and sanitary requirements, • Communicate effectively with Team Members and Management to resolve any interpersonal issues as needed, • Use specific kitchen machinery/equipment such as ice cream dispensers, fryers, warmers, etc., • Ensure Restaurant cleanliness daily by clearing tables, sweeping, and mopping floors, washing/sanitizing/disinfecting kitchen utensils and high touch-point areas, and servicing restrooms, • Handle Guests’ concerns and complaints professionally and calmly to resolve problems according to Restaurant Policy, • Maintain a neat and tidy appearance by wearing a uniform and adhering to the DHC Uniform Policy, • Follows all company guidelines for food and cash controls; follows all cost control guidelines to maintain and minimize Restaurant costs and effectively uses all products, supplies, and equipment facilities, • Current student or high school diploma/GED preferred, • Must be at least 18 years old, • Flexibility to work nights, weekends, holidays, opening and closing shifts, • Ability to stand for long periods of time and work in a fast-paced environment, • Ability to work in close quarters and around heat, • Positive attitude while conducting any and all duties, • Commitment to guest satisfaction. Looks at Restaurant operations from the Guest's point of view, • Effective communicator with Teammates and the Restaurant Management Team, • Must have reliable transportation to work, • Must have telephone or other reliable method of communicating with Restaurant Management Team and Teammates"About Dave's Hot Chicken Dave’s Hot Chicken was created by best friends Dave Kopushyan, Arman Oganesyan, and Tommy and Gary Rubenyan. Dave, a chef trained in Thomas Keller’s (French Laundry) organization set out to create the perfect Hot Chicken by searching, tasting, and frying. The four friends scrounged up $900 to put a tiny stand in an East Hollywood parking lot. The menu was simple, and the chicken was the star. And what chicken it is! Sourced and prepared to be the juiciest and most tender imaginable with each piece topped with Dave’s own mix of spices ranging from No Spice to “The Reaper.” Arman created Instagram buzz and the lines began to grow. Two nights later, Eater/LA showed up to see what the fuss was about. The next morning's headline read ""East Hollywood's Late Night Chicken Stand Might Blow Your Mind."" Almost instantly, the lines stretched around the block. A year later, the boys had the money to open a shop in a hip strip-mall with décor by local street artists, where the crowds continued to grow with wait-times of an hour and more. From there, the incredibly craveable “Hot and Spicy” varieties have created a cult following with rave reviews across the U.S. and Canada."

Job Description Dave's Hot Chicken in Henrietta Now Hiring Team Members Starting at $17 per hour with Immediate Growth Opportunities Summary: The Team Member is responsible and accountable for performing specific tasks and duties assigned within the Restaurant including Guest Service, Food prep, Restaurant Cleanliness and Teamwork. Job Expectations: The Team Member will work productively in a fast-paced environment, maintain a fast speed of service, interact with Guests, work closely with other Team Members to complete tasks, follow all safety and security procedures, and conduct other duties assigned by the Restaurant Management Team. Duties: • Follow the steps outlined in the DHC Training Program to learn new skills, duties, and responsibilities, • Abide by the rules and direction given by the Restaurant Management Team and refrain from insubordination, • Communicate to their immediate supervisor when additional training guidance and practice is needed, • Understand how each job responsibility impacts Guests, the Team, and overall Restaurant Operations and success, • Greet Guests, record orders, and serve food and beverages with a consistently positive and helpful attitude, including answering questions, • Work together with other Teammates to prepare items on the DHC menu while following cooking instructions, safety procedures, and sanitary requirements, • Communicate effectively with Team Members and Management to resolve any interpersonal issues as needed, • Use specific kitchen machinery/equipment such as ice cream dispensers, fryers, warmers, etc., • Ensure Restaurant cleanliness daily by clearing tables, sweeping, and mopping floors, washing/sanitizing/disinfecting kitchen utensils and high touch-point areas, and servicing restrooms, • Handle Guests’ concerns and complaints professionally and calmly to resolve problems according to Restaurant Policy, • Maintain a neat and tidy appearance by wearing a uniform and adhering to the DHC Uniform Policy, • Follows all company guidelines for food and cash controls; follows all cost control guidelines to maintain and minimize Restaurant costs and effectively uses all products, supplies, and equipment facilities, • Must be at least 16 years old, • Flexibility to work nights, weekends, holidays, opening and closing shifts, • Ability to stand for long periods of time and work in a fast-paced environment, • Ability to work in close quarters and around heat, • Positive attitude while conducting any and all duties, • Commitment to guest satisfaction. Looks at Restaurant operations from the Guest's point of view, • Effective communicator with Teammates and the Restaurant Management Team, • Must have reliable transportation to work, • Must have telephone or other reliable method of communicating with Restaurant Management Team and Teammates"About Dave's Hot Chicken Dave’s Hot Chicken was created by best friends Dave Kopushyan, Arman Oganesyan, and Tommy and Gary Rubenyan. Dave, a chef trained in Thomas Keller’s (French Laundry) organization set out to create the perfect Hot Chicken by searching, tasting, and frying. The four friends scrounged up $900 to put a tiny stand in an East Hollywood parking lot. The menu was simple, and the chicken was the star. And what chicken it is! Sourced and prepared to be the juiciest and most tender imaginable with each piece topped with Dave’s own mix of spices ranging from No Spice to “The Reaper.” Arman created Instagram buzz and the lines began to grow. Two nights later, Eater/LA showed up to see what the fuss was about. The next morning's headline read ""East Hollywood's Late Night Chicken Stand Might Blow Your Mind."" Almost instantly, the lines stretched around the block. A year later, the boys had the money to open a shop in a hip strip-mall with décor by local street artists, where the crowds continued to grow with wait-times of an hour and more. From there, the incredibly craveable “Hot and Spicy” varieties have created a cult following with rave reviews across the U.S. and Canada."

Job DescriptionCompany Description We are looking for a Branch Delivery Driver to join our Rexel, USA team in Rochester, NY! Rexel USA is one of the largest distributors of electrical products, data communication, and related supplies in the United States. Rexel USA operates its electrical distribution business in the United States through eight Regions that go to market under various banner and trade names, including Rexel, Rexel Automation, Gexpro, Mayer, and Platt Electric Supply. In addition to an online store, Rexel USA has a distribution network of over 460 warehouse storefront locations throughout the U.S. Job Description Summary: Employee’s level and pay will be dependent on their level of experience, knowledge, and capabilities.The Truck Driver - Combined is responsible for delivering products to/from customers, company branch/warehouse locations, and company suppliers in a delivery van or box truck (No CDL required). Responsible for ensuring that deliveries are prepared to meet customer requirements in the most efficient manner and materials are correct and free of damage. What You'll Do: • Inspect company vehicle for visual and operating defects; responsible for completing a daily inspection report, • Keep company vehicle clean, serviced, and maintained; alert supervisor of repair and/or service needed, • Must follow Department of Transportation (DOT), local and state driving laws and regulations, • Load or unload vehicle and ensure all material for each order is correct (quantity and type of material) and that material is free of damage before departure, • May assist in preparing orders for delivery, • Ensure all appropriate documentation is thoroughly completed at the time of delivery, including delivery receipt is signed by the customer, packing list and branch/warehouse manifest, • Pick up material returns from customers; responsible for inspecting the condition of the material and verifies quantities and catalog numbers, • Pick up material from company suppliers, • Senior Truck Driver will participate in the training of entry level Truck Drivers; and provides mentorship and coaching, • May be required to support other Warehouse duties such as preparing and filling orders and/or receiving, stocking, staging, and shipping material, • Perform other duties as assigned Job Duties Disclaimer: The information contained in this job description is intended to describe the essential job functions required of those assigned to this job. It is not intended to be an exhaustive list of all responsibilities, duties, knowledge, skills, and abilities needed to perform the job. Please note that management retains the right to assign or reassign duties and responsibilities to this job at any time. The ability to competently perform all the essential duties of the position, with or without reasonable accommodation, demonstrate commitment to effective customer service delivery, integrity, and the ability to work productively as a member of a team or work group are basic requirements of all positions at Rexel USA. Qualifications • In lieu of experience, must attend company driver training, • Must have a valid driver’s license, • Must be at least 21 years of age, • Must pass a pre-employment and annual review of the Motor Vehicle Record, • Must obtain verification of non-expired medical certificate as required by law within 60 days of hire, • Must not have had a suspended driver's license for a traffic accident/violation within the past 3 years, • Must not have any at fault accidents in the past 3 years, • Ability to handle loads with a combine weight not to exceed 26,000 GVW, • Ability to handle basic issues and problems, • Strong knowledge of safety regulations and be familiar with traffic and driver laws, • Willingness to adhere to assigned routes, schedules, safety procedures, and transportation laws, • Excellent organizational and time management skills; ability to meet deadlines, • Excellent customer service skills, • Good attention to detail, • Ability to meet deadlines, • Ability to work overtime as needed Additional Information Physical Demands: • Sit: Must be able to remain in a stationary position - Constantly – at least 51%, • Walk: Must be able to move about inside/outside office or work location - Occasionally – up to 20%, • Use hands to finger, handle, or feel: Operates a computer and other office machinery - Constantly – at least 51%, • Stoop, kneel, crouch, or crawl: Must be able to crouch down to stock shelves, pick up boxes, or position oneself to maintain computers in the lab/under desks/in server closet - Occasionally – up to 20%, • Climb or balance: Must be able to ascend/descend on a ladder, forklift, pallet jack, or other warehouse equipment - Occasionally – up to 20%, • Talk, hear, taste, smell: Must be able to use senses to effectively communicate with co-workers and clients and detect hazardous conditions - Constantly – at least 51% Weight and Force Demands: • Up to 10 pounds - Constantly – at least 51%, • Up to 25 pounds - Constantly – at least 51%, • Up to 50 pounds - Frequently – 21% to 50% Working Environment: • Exposed to unpleasant or disagreeable physical environment such as high noise level and/or exposure to heat and cold - Occasionally – up to 20%, • Exposed to electrical hazards; risk of electrical shock - Occasionally – up to 20%, • Handles or works with potentially dangerous equipment - Frequently – 21% to 50% Disclaimer: “Rexel USA (A VEVRAA Federal Contractor), and its affiliated companies, is an EEO/Disabled/Veterans employer. All qualified candidates will receive consideration for employment without regard to any characteristics protected by law.” Our Benefits Include: • Medical, Dental, and Vision Insurance, • Life Insurance, • Short-Term and Long-Term Disability Insurance, • 401K with Employer Match, • Paid vacation and sick time, • Paid company holidays plus flexible personal days per year, • Tuition Reimbursement, • Health & Wellness Programs, • Flexible Spending Accounts, • HSA Accounts, • Commuter Transit Benefits, • Additional Optional Insurance such as Pet Insurance, Legal Assistance, Critical Illness, Home and Auto Insurance to name a few., • Employee Discount Programs, • Professional Training & Development Programs, • Career Advancement Opportunities – We like to promote from within Our goal is to create a workplace where everyone feels respected, valued, and empowered to succeed as we understand that our success and innovation is enhanced by an inclusive and diverse workforce. Rexel USA (A VEVRAA Federal Contractor), and its affiliated companies, is an EEO/Disabled/Veterans employer. All qualified candidates will receive consideration for employment without regard to any characteristics protected by law.

Delivery Driver for our Rochester, NY location!. Our drivers provide a face-to-face delivery service to our customers. In addition to our full-time schedule & excellent benefits, our delivery vehicles are equipped with heat, A/C, and are regularly maintained!.

Job Description Department: Grounds Reports To: Director of Agronomy and E/W Superintendent Position Location: Rochester, NY Status: Seasonal Duration: Spring 2026 - Flexible start and end dates to accommodate school schedules/calendar. The Club: Oak Hill Country Club is a 36-hole facility located in Rochester NY. Both championship courses are designed by storied architect Donald Ross. The East Course is consistently ranked as a top 25 course in the country and known as one of the greatest venues for championship golf. With the success of the 2023 PGA Championship, Oak Hill has been selected to host the 2027 U.S. Amateur on both courses. The Oak Hill team is looking to fill intern positions for the summer of 2026. Grounds Intern Position Summary: Oak Hill seeks students who want to take their career and passion for turf management to the next level. Interns who are willing to learn and dedicate their time to our program will gain the skills and knowledge of turf management at the highest level. We pride ourselves on teamwork, embracing our motto "Be the Best," delivering championship conditions daily for our membership. We are looking to grow our team and mentor young turf professionals who will one day become successful superintendents nationwide using the knowledge they've gained through our program. Our team places a strong emphasis on promoting from within our organization. All our current assistants were once student interns who returned after graduating and have climbed the ladder within our ranks. In the past 20 years, 11 Superintendents have been placed across the country and have climbed the ranks of the organization. They have all moved into their own superintendent roles. Specific Duties: Individuals selected will have ample opportunities to advance their education at Oak Hill. Students who possess a great work ethic, a positive attitude, and the ability to work as team players will gain substantial experience not limited to: • Under the guidance of the Golf & Grounds leadership team, participate in the planning, execution, and follow-up of all agronomic practices., • Assist in all aspects of maintaining championship-level golf courses., • Water management., • Experience-based knowledge of how we manage both USGA Bent grass greens and Poa/Bent push-up greens., • Calibration, chemical, and fertilizer application. (Spray Hawking, Boom Spraying)., • Irrigation Troubleshooting and repair., • Candidate must possess a positive attitude, strong work ethic, attention to detail, eagerness to learn, and organizational skills., • High integrity, strong people skills, and effective communication skills., • Innovative thinker and self-starter with perseverance to work on a team to succeed., • Must have the ability to be present and active on the golf course for a minimum of 10 hrs per day., • Must be able to continuously stand, walk, and/or sit for a minimum of 8 hours., • Must be able to bend, kneel, push, and pull over the course of a shift., • Will be required to perform job functions outdoors and be exposed to sun, cold, heat, humidity, and other elements., • Must be able to work a flexible shift that includes early mornings, nights, weekends, holidays, split shifts, and extended shifts., • Must be 18 years of age., • Must have a reliable form of transportation to and from work., • Must be able to operate golf course/grounds-related equipment., • Ability to read, write, and communicate effectively in English, both written and oral., • Off-site housing will be provided., • Opportunity for intern swap with other high-caliber clubs., • Uniforms provided., • Golf shop discount., • Golf privileges., • Overtime available., • Opportunity for advancement within the organization.

Measuring and combining ingredients and using mixers, blenders, heat sources, and other equipment to make baked goods, such as cookies, bread, cakes, etc.

Boilermaker Job Duties: Design, install, and repair boilers used to heat water for generating electric power or providing heat in buildings and factories.Weld sections of boiler together using

Role Overview We are looking for an Electrical and Instrumentation Mechanic to Support our Advanced Material & Chemicals division in Rochester, NY. Job Duties: • Electrician & Instrumentation skilled trade service to provide multi-discipline capability to repair, maintain, install and make improvements on film manufacturing equipment, complex processing equipment, chemical processing equipment, building general systems (includes instrumentation, pneumatics, hydraulics, controls (PLC's & distributed control systems (DCS), and a wide range of electrical components), • Ability to calibrate process control instruments tight tolerances using sophisticated calibration equipment., • Ability to achieve a high level of expertise to effectively troubleshooting and repair equipment, including root cause analysis., • Some experience or expertise in mechanical, piping, HVAC equipment and controls., • Includes maintenance of motors, breakers, starters, variable speed drives, process controls devices, heat tracing, lighting, etc., • Calibrate, alignment and make adjustments with test equipment and measurement equipment., • Installation of conduit, wiring, switches, relays, lighting, circuit breakers using power tools and hand tools, • Install upgrades to enhance or replace outdated control systems., • Execute preventive and predictive maintenance programs., • Data entry and report writing including ISO documentation., • Working knowledge of Microsoft Office and maintenance software tools., • Ability to change based on priorities\n\n Requirements: • Dependable, maintain good attendance, • Maintain a clean work area and operate in a safe manner at all time., • Detail orientated Team Player, • Strong electrical and/or instrumentation training and demonstrated skills/experience, • Proficient in Math functions, • Must demonstrate effective analytical troubleshooting skills, • Able to read electrical, instrument and machine drawings, • Able to read/modify PLC programs to troubleshoot equipment problems, • Understanding of new electrical codes for hazardous environments (flammable liquids), • Ability to work effectively with minimal supervision, • Excellent safety record - places safety and environment as top priority in all work, • Knowledge of Lock Out / Tag Out, • Good communication skills - daily communications with leaders, maintenance planner, technical staff, engineering and operations as needed., • Team player - willing be flexible, often work in other areas and with other trades as needed., • Significant walking or other means of mobility., • Ability to work in a standing position for long periods of time (up to 8 hours)., • Ability to reach, bend, stoop, push and/or pull, and frequently lift up to 35 pounds and occasionally lift/move 40 pounds., • Ability to work off of ladders or scaffolding, in some awkward positions, • Indoor and outdoor work assignments, • The noise level in the work environment is usually moderate to loud., • Wears protective clothing and/or Personal Protective Equipment required by the work environment or governmental regulations.\n\n Qualifications: • HS diploma, and a 2-year degree or some level of instrumentation, electrical of demonstrated trade experience., • Varying schedule to include evenings, holidays, weekends and extended hours as business needs dictate. \n\n EOE Policy Statement: All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or disability. Estimated Salary: $28.00 - $32.00 Experience Level: 5-10 Years Requisition ID: 1000

Public retail store setting taking care of our customers; all public areas are climate controlled; some stock rooms may not be climate controlled; some outdoor work if assigned to retrieve shopping carts or while unloading trucks; Frame shop contains glass cutter and heat press; work hours include n

Don't let this sizzling opportunity slip through your fingers! Apply now to become our HVAC Operations Manager. We believe in turning up the heat when it comes to job perks! As our HVAC Operations Manager, you'll earn a competitive salary up to . The company's success lies in creating win-win-w

Job DescriptionDescription: Are you a skilled surveyor with a passion for precision and a knack for problem-solving? Fisher Associates is seeking a dynamic Project Surveyor to join our team! In this role, you’ll be at the heart of our projects, ensuring that our land surveying services are not only accurate but also aligned with our high standards. You’ll play a vital role in bridging the gap between different disciplines within our project teams, ensuring that every project runs smoothly from start to finish. If you’re ready to make a big impact on exciting and diverse projects, we want to hear from you! Who We Are: Fisher Associates, P.E., L.S., L.A., D.P.C. is a consulting engineering and professional services firm serving the Transportation, Land Development and Energy market sectors. Our comprehensive services include landscape architecture, planning, engineering, environmental, survey, GIS and construction representation. We are headquartered in Rochester NY, with eight offices throughout NY, PA and TX. Why a Career with Fisher Associates? • Be Heard, Be Valued: Our leadership team is accessible and welcomes your feedback and ideas., • There is No “I” in Team: Every team member matters and contributes to our success by owning their role on the team. Contribute your creative ideas and expertise to our exceptional groups., • Transparency Matters: We keep you informed with frequent communications and quarterly financial reviews., • Long-Term Client Relationships: Our goal is to build long-lasting client relationships while delivering high-quality solutions., • Community Service: We are passionate about giving back and creating a legacy of service that improves equity, access, dignity and joy for members of our diverse communities., • Work on Local Projects: Experience the positive change you create in our own community., • Diverse Project Opportunities: The diverse comprehensive services we offer translate into challenging and engaging learning & growth opportunities., • Growth is Your Journey: Advance your career with clearly defined career paths, tuition assistance and ongoing training to support your professional goals. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. The primary function of this role is responsible for, but not limited to, the following: • Supervises survey technicians, field crews, and CADD technicians on the project team., • Performs routine and complex survey calculations and control adjustments., • Performs, assigns, or assists with records research., • Performs, assigns, or assists with CADD drafting assignments., • Analyzes boundary evidence and parcel/ROW records to determine property boundaries and Rights of Way., • Determines and documents property boundaries, easements, and land ownership details to ensure compliance with legal regulations., • Creates detailed topographic maps and surveys to provide essential data for project planning and design., • Maintains positive client relationships, understanding project requirements, and facilitating all deliverables to ensure an outstanding customer experience using Clientship Philosophy., • Provides QA/QC on survey work completed for all sectors., • Associate or Bachelor's degree in surveying, geomatics, civil engineering, or a related field., • Experience in surveying software and equipment, including AutoCAD, GPS, total stations, and data collectors., • Previous experience in land surveying, • Must be knowledgeable in all aspects of Land Surveying, including boundary determinations, control adjustments, topographic surveying/mapping, NYSDOT Standards and Procedures, and ALTA requirements., • Proficiency in AutoCAD Civil 3D and MicroStation preferred., • Exhibit behaviors that align with the Fisher Values: Aspire to Excellence, Teamwork and Respect, Owning our Results and Empowered Employees., • Aspire to excellence, consistently seek to improve, and demonstrate high-quality work at all levels., • Team player: collaborate effectively at all levels; treat coworkers, clients, and vendors with respect in all interactions; seek to listen effectively, understand others, and build trust., • Own and accept responsibility for results., • Honest, transparent, and trustworthy. Ability to identify and handle priority and/or sensitive issues with discretion and a commitment to confidentiality., • Proactive, results-oriented, self-motivated, and eager to learn., • Strong critical thinking and problem-solving skills., • Ability to consistently demonstrate sound judgement., • Excellent organizational, project management and time management skills, • Ability to work in a fast-paced environment and manage multiple tasks simultaneously., • Strong attention to detail., • Exhibit flexibility with assignments, workflow, or project changes., • Listen and respond to feedback in a positive manner. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Ability to stand and walk for long periods of time and distance., • Prolonged periods sitting at a desk and working on a computer., • Must be able to lift up to 50 pounds at a time., • Traveling on an occasional basis to project sites located throughout New York, • Must be able to access and navigate construction sites and job areas, • Ability to transverse uneven grounds Fisher Associates does not discriminate in hiring or employment on the basis of age, race, creed, color, national origin (including ancestry), religion, gender or sex, sexual orientation (including transgender status, gender identity or expression), pregnancy (including childbirth, lactation, and related medical conditions), disability, reproductive health decision making (including, but not limited to, the decision to use or access a particular drug, device, or medical service), marital status, partnership status, caregiver status, domestic violence victim status, familial status, military status, unemployment status, genetic information (including genetic characteristics), citizenship or immigration status, or any other protected status under federal, state, or local laws.

Job Description As a Field Service Technician, you will utilize customer communication skills, and mechanical and electrical knowledge to repair, troubleshoot, modify and test complex technical problems on Mitsubishi Machining products. This position is a traveling position Monday through Friday, and home on weekends. While travel is mostly regionalized, Field Service Technicians typically stay in a hotel near the customers' facility Monday through Friday. Travel is primarily throughout the US but can be international in some cases as well. Our services are provided on-site at our customer’s facilities and via telephone if the situation permits. We train the right people for a successful career in the machinery industry and pride ourselves on customer retention. ESSENTIAL RESPONSIBILITIES: • Travel to customer locations to diagnose complex technical problems and perform on-site repair, • Examine machines mechanically and electrically to perform repairs by dismantling machines and rebuilding as needed, • Diagnose technical problems and troubleshoot via telephone, • Communicate professionally and effectively with customers, • Effectively interpret schematics and block diagrams to analyze and troubleshoot problems, • Document in detail product problems and resolutions, • Other duties as assigned KNOWLEDGE, SKILLS AND ABILITIES: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions • Working knowledge of machining and manufacturing processes, • Ability to use basic hand-tools, • Ability to operate a computer with windows operating systems, • Excellent oral and written communications skills, • Able to be comfortable working with heights, • Valid Driver’s License EDUCATION AND EXPERIENCE: • Associates or technical degree preferred, • Experience with electrical Measurement and inspection techniques (voltmeter, oscilloscope, and other measuring equipment), • Experience in troubleshooting and repairing mechanical problems (ball screws, bearings, gearing, and various way systems), • Experience in Mechanical measurement and inspection techniques (indicators, micrometers, gage blocks and optical comparator. Laser Interferometer and ball bar a plus) WORKING CONDITIONS: The job operates mainly indoors, but may be exposed to changing weather conditions, such as extreme heat or cold, rain, sun, wind, etc. This job also works near moving mechanical parts and the noise level is moderate to loud. This position generally involves a lot of driving and overtime work. The ability to operate a motor vehicle and possession of a valid driver’s license is required. PHYSICAL REQUIREMENTS: This job requires very frequent bending at the waist, twisting of the upper body, standing, speaking and hearing, and frequent kneeling. Repetitive use of the hands, squeezing, keyboarding, and crouching. Requires frequent lifting and carrying of 1-10 pounds, recurrent lifting of 11-20 pounds, and occasional lifting and carrying of 21-50 or more pounds. It also requires constant pushing and pulling of 1-50 pounds and infrequent pushing and pulling of over 50 pounds with the aid of handcarts or other wheeled devices. Good visual and color acuity are a must to perform this type of job. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job Description Join our Team of Employee Owners!Why work for a company, when you can own it?Siewert Equipment, a Division of Cummins-Wagner Co. Inc., specializes in the sale and service of pumps, heat exchangers, boilers, water heaters, cooling towers, and air compressors. With offices throughout upstate New York, Siewert Equipment has been New York State’s premier distributor of pumps, mixers, blowers, and process equipment for over 67 years.Job Title: Field Service Technician Department: Rochester ShopLocation: Rochester, New YorkReports To: Assistant Service ManagerJob OverviewThe Service & Repair Technician performs hands-on technical services for a wide variety of pumps, controls and other types of rotating equipment. This position requires a motivated professional with a high degree of technical aptitude to provide both in-shop and field service to support Industrial and Municipal customers throughout upstate NY. Essential characteristics include good communication skills, customer service skills, teamwork, attention to detail, ability to work independently and flexibility for reasonable travel.Our most successful Field Service Technicians: • Possess superior communication, analytical, and organizational skills, • Exhibit goal-oriented behaviors and time management principles, • Exude a customer-focused attitude, • Apply extensive attention to detail to all tasks, • Toggle between projects and responsibilities with ease, • Repair, maintenance and trouble-shooting of pumps, blowers, motors, and controls, • Equipment start-up commissioning and training, • Understand and adhere to all safety related policies, rules, and guidelines, • Prepare and maintain clear and accurate documentation for assigned work, • Maintain an organized, clean & resourceful work environment to include the shop, individual work areas, and service vehicle, • Possess basic experience with computers and wireless communication devices preferred, • Must be able to lift 50 lbs. unassisted and 100 lbs. assisted, • Possess a High school diploma / GED equivalent, • Possess a Minimum of 5 years pump or other rotating equipment maintenance & repair experience preferred, • Must be able to pass background and reference checks, as well as a drug test, • Must maintain an active driver’s license with a clean driving recordScope of Responsibility:, • Repair, maintenance and trouble-shooting of pumps, blowers, motors, and controls, • Equipment start-up commissioning and training, • Prepare and maintain clear and accurate documentation for assigned work, • Build and maintain positive relationships with customers, coworkers, and suppliers, • Maintain an organized, clean & resourceful work environment to include the shop, individual work areas, and service vehicle, • Understand and adhere to all safety related policies, rules, and guidelines, • Participate in on-call rotation for after-hours service, • Frequent day travel throughout upstate NY with some overnight travel required, • Perform all other duties as assignedSiewert Equipment, a Division of Cummins-Wagner Co, Inc, Gives Back to Employees:, • Employee Stock Ownership Program, • Bonus Program, • Paid time off and holidays, • 401k Match, • Flexible Spending Account, • Life Insurance, • Comprehensive Health Insurance

Job Description Position:CNC Mill Set-up Operator - PART TIME Reports to:Plant Manager Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning QS:9000, ISO:9002, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: Sets up and may operate horizontal and vertical CNC mills. Requires only general supervision. Minimum Qualifications: • Job knowledge through suitable education or prior work experience, • Able to read blueprints, • 4th axis experience, • Programming a must, • Know correct speeds and feeds, tooling, design and manufacture of fixtures Specific Duties: • Set up horizontal & vertical CNC mills, • Make proper set-up to give rigidity to work piece, • Work with materials such as cast iron, steel, bronze, brass and other non-ferrous materials, • Hold tolerances of .003 inch, • Manufacture and inspect part to blueprint, • Upkeep daily preventative maintenance log Physical Demands: 1. Must be able to lift up to 50 lbs regularly, 2. Requires frequent bending, stooping, squatting, pushing and pulling of parts and part containers, 3. May be required to stand for long periods of time, 4. May involve some repetitive motions, 5. Due to the open environment of the warehouse, must be able to work in various weather and temperature conditions to include extreme heat, humidity and cold This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Job DescriptionSalary: $70,000-$85,000/year About Brothers International Food Holdings, LLC: Brothers International brings the world's best fruit to its customers. Our Ingredients divisions supply every major food and beverage manufacturer in North America with the fruits from the best growing regions of the world. Our CPG division sells market-leading branded and private label freeze-dried fruits to retailers nationwide. We are seeking a full-time Manager, Domestic Transportation & Warehousing to join our talented team in our Rochester, NY headquarters! Position Summary: The Manager, Domestic Transport and Warehousing is responsible for the strategic development, optimization, and execution of all domestic logistics across the organization's multiple divisions. This role drives cost efficiency through rigorous carrier negotiation, ensures operational excellence across all FTL, LTL, and small package services, and establishes a compliant, long-term warehousing strategy. Essential Functions: • Engage with internal and external customers (including Divisional VPs) to understand the comprehensive warehousing needs of the company., • Gather volume data from all operating divisions regarding transportation needs., • Create and issue RFQs for all domestic transportation modes related to ambient, chilled and frozen warehouse needs. Vet responses, negotiate pricing and lead a cross-functional team to choose key service providers., • Develop and issue routing guide for all operating divisions., • Provide spot quotes and customized service options as needed., • Ensure all LTL freight is properly classified via National Motor Freight Classification (NMFC) standards., • Work with SLS team to develop sound audit processes for freight invoices., • Serve as point of escalation in resolving freight claims related to shrinkage or damage., • Develop KPIs and implement Quarterly Business Review (QBR) with all core providers., • Lead initiatives to integrate freight tender and shipment status updates into corporate ERP system, utilize EDI for all warehouse transactions., • Monitor shipments as required to ensure timely delivery and adherence to published transit time schedules., • Perform analyses (such as velocity studies and heat mapping) to identify optimal warehouse location and storage requirements., • Develop internal processes related to inventory control, including cycle count programs, physical inventory requirements, comparison/discrepancy reporting and reconciliation. Minimum Qualifications: • 4-year degree in applicable area of study (business, transportation management, supply chain management, etc.) or 2 year degree and applicable experience., • 3+ years of experience transportation and/or warehousing operations. Management of multi-site operations preferred., • Budget responsibilities in excess of $2MM annually., • Experience in the freight forwarding industry preferred. Knowledge, Skills, & Abilities: • Knowledge of domestic freight terms and NMFC classification., • Understanding of dimensional vs. actual weight calculations., • Understanding of all domestic transportation modes, including FTL, LTL, small package delivery, Multi-modal/TOFC, air freight and expedited shipping methodologies., • Knowledge of warehousing regulatory compliance requirements, including OSHA, GMP, FDA, USDA, NYS Agg and Markets, etc., • Knowledge of transportation regulatory compliance requirements, including DOT, FMSCA, SAFER, etc., • Strong analytical skills; critical thinking and problem-solving mindset. Knowledge of continuous improvement methodologies., • Knowledge of various transportation modes including air freight, LCL, FCL., • General knowledge of geography and transactions related to the warehousing and transportation industries., • Proficiency in general office computer skills Email, internet, Microsoft office products. ERP experience preferred., • Engaged team leader focused on employee development and conflict resolution., • Excellent interpersonal, written and oral communications skills., • Detail oriented with strong organizational skills. Ability to perform/prioritize multiple tasks to meet various deadlines., • Self-motivated; ability to work with minimal supervision. Brothers International is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, pregnancy, disability, age, veteran status, or other characteristics.

Job DescriptionAbout TravertineTravertine is a Climate Tech start-up based in Boulder, CO, that is rapidly scaling a technology for low-waste, carbon-negative production of critical elements, focusing on phosphoric acid production for our go-to-market application. Our electrochemical process converts phosphate rock into phosphoric acid for EV batteries and fertilizers, while simultaneously converting carbon dioxide captured from the air into a mineral addition to cement. Travertine was spun out of UC Berkeley in 2022 to scale this process to gigatons of permanent CDR while massively reducing industrial waste. Since its founding, Travertine has raised over $25M in capital, including over $5M in US Federal and State government grants. As one of the first companies to receive pre-purchases of CDR from the new Stripe-led $1B Frontier fund, and as founding members of the Carbon Removal Alliance, we are committed to industrial decarbonization at scale. We were named C&EN 10 startups to watch in 2022, a Bloomberg NEF Pioneer in 2023, and RMI Third Derivative 1st Gigaton Captured program participants in 2024. Today we are focused on scaling up commercial deployments of our technology, starting with a Demonstration Plant that is being installed in Ontario, NY. We believe in developing practical approaches to solving the climate crisis. The RoleTravertine is seeking a highly motivated and safety-conscious Operator to be part of the team operating our first-of-a-kind Demonstration Plant. This role involves close collaboration with other operators, engineers, and the R&D team to maintain steady operation while acquiring the critical data needed to verify carbon dioxide removal and inform the commercial design. Tasks will include equipment operation and maintenance, solution preparation, sample collection, sample analysis, waste neutralization and disposal, and other tasks as needed. Ability to troubleshoot process equipment and process issues is critical for this role. If you want to be part of a high-performing team starting up and operating a first-of-a-kind sustainable chemical process, this is the role for you. Key Responsibilities • Operate a wide range of chemical processing equipment, including but not limited to reactors, pumps, heat exchangers, and filtration systems., • Follow standard operating procedures (SOPs), batch records, and safety protocols to conduct chemical processes., • Monitor process variables and make adjustments to ensure safe and optimal operation., • Collect samples, perform chemical analyses, record accurate and detailed operational data and observations during runs., • Perform routine equipment maintenance, cleaning, and calibrations., • Collaborate with engineers, chemists, and other technical staff to execute test plans and experiments., • Assist in the setup and teardown of process equipment and systems for various campaigns., • Troubleshoot equipment and process issues and report findings to engineering staff., • Maintain a clean, organized, and safe working environment in compliance with company policies and regulatory standards., • Participate in safety audits, process hazard analyses, and continuous improvement initiatives.Qualifications, • Associate's degree in Process Technology, Chemical Technology, Industrial Technology, Chemistry, Materials Science, or related field, • 0-2 years’ experience as a technician building, maintaining, and operating chemical equipment, • Experience with wet chemistry laboratory work and sample analysis, • Strong mechanical aptitude and familiarity with chemical processing equipment., • Basic understanding of process control systems and instrumentation., • Ability to interpret technical documents such as P&IDs, batch sheets, and MSDSs., • Excellent attention to detail and strong organizational skills., • Ability to work independently and as part of a multidisciplinary team., • Flexibility to work shifts, nights, weekends, or extended hours as needed. Note the plant will operate 24/7.Benefits, • Competitive pay, • Health, Dental, Vision, Life Insurance, • 401k with 100% match up to 3% of salary

Job DescriptionDescription: General Job Summary: Using job production documentation, selects, loads, and aligns tools into press brake machines in order to produce metal parts from raw stock while ensuring the safety integrity of the tool and the quality of the finished part. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Ensure all safety processes and procedures are defined for the job., • Reviews job description (job traveler) and determines tool requirement., • Using material handling equipment, loads and aligns appropriate tool into press brake machine., • Sets up blanks for forming in machine., • Selects appropriate packaging material and sets up supply., • Make the first part to ensure quality., • Confers with toolmakers and quality personnel to resolve problems., • Inspects first run of the part. Submits to inspection for blue tag. Runs parts., • Instructs machine operator on part production., • Performs periodic quality checks., • Schedules work on various press brake machines to ensure daily/weekly production requirements are met., • May train new brake operators., • May assist in scheduling jobs in other presses., • Maintains inventory of tools and fixtures., • Assists with other duties as assigned by supervisor/ manager. Supervisory Responsibilities: None Requirements: Education High school diploma or general education degree (GED); or equivalent combination of education and experience. One year certificate from college or technical school preferred Experience 2-3 years related experience or training Computer Skills: None Other Requirements: Understanding and ability to use inspection gauges (verniers, micrometers, height stand, pins) and material handling equipment. Language Skills: Intermediate Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or Associates of organization. Mathematical Skills: Basic Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability: Intermediate Skills: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Physical Demands: The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to stand; walk; sit; maneuver through the office and factory; use hands to finger, handle, or feel; reach with hands and arms; grasping and twisting; talk or hear; lift and/or move equipment/product weighing up to 50 pounds. Work with another associate to lift anything greater than 50lbs. Work Environment: The work environment characteristics described here are representative of those an Associate encounter while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. While performing the duties of this job the Associate is regularly exposed to extreme heat; extreme cold; wet and/or humid conditions. While performing the duties of this job the noise level in the work environment is usually loud.

Job DescriptionDescription: At American Packaging Corporation (APC), you’ll find the packaging career you’ve been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC’s longstanding success is fueled from the inside out. We’re constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America’s awards for 12 years in a row. It’s how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Rochester, NY SUMMARY: The primary focus of the intern will be to assist the technical staff testing physical properties of flexible packaging, both for new development and production. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Work in the Corporate lab gathering data such as bond strength, seal strength, tensile strength, moisture/oxygen barrier, sustainability and other material testing., • Tasked with project work and analysis of the data they collect. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE Pursuing a Bachelor’s degree in Packaging Science. Experience with lab equipment such as tensile tester, heat sealer, etc. Experience with Microsoft Excel Ability to gather data competently into a report format Statistical Experience is optional LANGUAGE SKILLS Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the public. MATHEMATICAL SKILLS Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. REASONING ABILITY Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. PHYSICAL DEMANDS The physical demands described here are representatives of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee frequently is required to sit and reach with hands and arms. The employee is occasionally required to stand; walk; climb or balance; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 10 pounds. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: .

Job Description Shift Leader - Dave's Hot Chicken in Irondequoit, NY *** $19 an hour starting wage, plus Huge Growth Opportunity Summary: The Shift Leader is responsible and accountable for all Restaurant activities while on duty. The Shift Leader will work with the Restaurant Management Team to ensure all activities are consistent with and supportive of the Restaurant’s business plan. They will ensure all Team Members are performing their job responsibilities and meeting expectations. Job Expectations: The Shift Leader performs Leadership, Management, and Organizational tasks while supervising fellow Teammates, monitoring their performance, to ensure they comply with company and safety policies, and delegate tasks appropriately. Duties: • Follow the steps outlined in the DHC Training Program to learn and train new skills, duties, and responsibilities, • Abide by and enforce to the rules and direction given by the Restaurant Management Team and refrains from insubordination, • Communicate to their immediate Supervisor when additional training guidance and practice is needed, • Effectively and consistently does required Ops Walks and Q&A checks to correct areas of opportunity, • Organize shift schedules for Team Members and monitor attendance, tardiness, and time off, • Assign duties to specific Team Members based on role and skills, • Understand how each job responsibility impacts Guests, the Team, and overall Restaurant Operations and success, • Greet Guests, record orders, and serve food and beverages with a consistently positive and helpful attitude, including answering questions, • Ensure Team Members work together with their Teammates to prepare items on the DHC menu while following cooking instructions, safety procedures, and sanitary requirements, • Use specific kitchen machinery/equipment such as ice cream dispensers, fryers, warmers, etc., • Ensure Restaurant cleanliness is conducted daily by delegating the clearing of tables, sweeping, and mopping floors, washing/sanitizing/disinfecting kitchen utensils and high touch-point areas, and servicing restrooms, • Handle Guests’ concerns and complaints professionally and calmly to resolve problems according to Restaurant Policy, • Maintain a neat and tidy appearance by wearing a uniform and adhering to the DHC Uniform Policy, • Are performance-oriented and performance driven; understand performance expectations and are aware of performance results, • Provide direction, supervision, and feedback to maintain levels of high productivity and Team morale, • Communicate Team Member work performance to the Restaurant Management team and appropriately address performance issues, • Train new and current Team Members on tasks, • Balance cash drawers and prepare cash deposits as assigned by the Restaurant Management Team, • Effectively plan, organize, and implement all daily operational routines and activities, • Complete all required administrative duties and daily paperwork including required checklists, • Supervise and perform closing and/or opening activities as directed by the Restaurant Management Team, • Effectively plan, organize, and implement all daily operational routines and activities, • Establish an environment of trust to ensure honest, open, and direct communication, • Role model and set a positive example for the entire Team in all aspects of business and personnel practices, • Follows all company guidelines for food and cash controls; follows all cost control guidelines to maintain and minimize Restaurant costs; properly uses all products, supplies, and equipment facilities, • Current student or high school diploma/GED preferred, • Must be at least 18 years old and fluent in English, • Certified in all stations following the DHC Training Program, • Flexibility to work nights, weekends, holidays, opening and closing shifts, • Ability to stand for long periods of time and work in a fast-paced environment, • Ability to work in close quarters and around heat, • Positive attitude while conducting any and all duties, • Commitment to Guest satisfaction. Looks at Restaurant Operations from a Guest’s point of view., • Effective communicator with co-workers and the Restaurant Management Team, • Must have reliable transportation to work, a driver’s license and proof of insurance, • Must have telephone or other reliable method of communicating with supervisor and co-workers"About Dave's Hot Chicken Dave’s Hot Chicken was created by best friends Dave Kopushyan, Arman Oganesyan, and Tommy and Gary Rubenyan. Dave, a chef trained in Thomas Keller’s (French Laundry) organization set out to create the perfect Hot Chicken by searching, tasting, and frying. The four friends scrounged up $900 to put a tiny stand in an East Hollywood parking lot. The menu was simple, and the chicken was the star. And what chicken it is! Sourced and prepared to be the juiciest and most tender imaginable with each piece topped with Dave’s own mix of spices ranging from No Spice to “The Reaper.” Arman created Instagram buzz and the lines began to grow. Two nights later, Eater/LA showed up to see what the fuss was about. The next morning's headline read ""East Hollywood's Late Night Chicken Stand Might Blow Your Mind."" Almost instantly, the lines stretched around the block. A year later, the boys had the money to open a shop in a hip strip-mall with décor by local street artists, where the crowds continued to grow with wait-times of an hour and more. From there, the incredibly craveable “Hot and Spicy” varieties have created a cult following with rave reviews across the U.S. and Canada."

Job Description Dave's Hot Chicken in Henrietta Now Hiring Shift Leaders Starting at $19 an hour with Immediate Growth Opportunities Summary: The Shift Leader is responsible and accountable for all Restaurant activities while on duty. The Shift Leader will work with the Restaurant Management Team to ensure all activities are consistent with and supportive of the Restaurant’s business plan. They will ensure all Team Members are performing their job responsibilities and meeting expectations. Job Expectations: The Shift Leader performs Leadership, Management, and Organizational tasks while supervising fellow Teammates, monitoring their performance, to ensure they comply with company and safety policies, and delegate tasks appropriately. Duties: • Follow the steps outlined in the DHC Training Program to learn and train new skills, duties, and responsibilities, • Abide by and enforce to the rules and direction given by the Restaurant Management Team and refrains from insubordination, • Communicate to their immediate Supervisor when additional training guidance and practice is needed, • Effectively and consistently does required Ops Walks and Q&A checks to correct areas of opportunity, • Organize shift schedules for Team Members and monitor attendance, tardiness, and time off, • Assign duties to specific Team Members based on role and skills, • Understand how each job responsibility impacts Guests, the Team, and overall Restaurant Operations and success, • Greet Guests, record orders, and serve food and beverages with a consistently positive and helpful attitude, including answering questions, • Ensure Team Members work together with their Teammates to prepare items on the DHC menu while following cooking instructions, safety procedures, and sanitary requirements, • Use specific kitchen machinery/equipment such as ice cream dispensers, fryers, warmers, etc., • Ensure Restaurant cleanliness is conducted daily by delegating the clearing of tables, sweeping, and mopping floors, washing/sanitizing/disinfecting kitchen utensils and high touch-point areas, and servicing restrooms, • Handle Guests’ concerns and complaints professionally and calmly to resolve problems according to Restaurant Policy, • Maintain a neat and tidy appearance by wearing a uniform and adhering to the DHC Uniform Policy, • Are performance-oriented and performance driven; understand performance expectations and are aware of performance results, • Provide direction, supervision, and feedback to maintain levels of high productivity and Team morale, • Communicate Team Member work performance to the Restaurant Management team and appropriately address performance issues, • Train new and current Team Members on tasks, • Balance cash drawers and prepare cash deposits as assigned by the Restaurant Management Team, • Effectively plan, organize, and implement all daily operational routines and activities, • Complete all required administrative duties and daily paperwork including required checklists, • Supervise and perform closing and/or opening activities as directed by the Restaurant Management Team, • Effectively plan, organize, and implement all daily operational routines and activities, • Establish an environment of trust to ensure honest, open, and direct communication, • Role model and set a positive example for the entire Team in all aspects of business and personnel practices, • Follows all company guidelines for food and cash controls; follows all cost control guidelines to maintain and minimize Restaurant costs; properly uses all products, supplies, and equipment facilities, • Must be at least 18 years old and fluent in English, • Certified in all stations following the DHC Training Program, • Flexibility to work nights, weekends, holidays, opening and closing shifts, • Ability to stand for long periods of time and work in a fast-paced environment, • Ability to work in close quarters and around heat, • Positive attitude while conducting any and all duties, • Commitment to Guest satisfaction. Looks at Restaurant Operations from a Guest’s point of view., • Effective communicator with co-workers and the Restaurant Management Team, • Must have reliable transportation to work, a driver’s license and proof of insurance, • Must have telephone or other reliable method of communicating with supervisor and co-workers"About Dave's Hot Chicken Dave’s Hot Chicken was created by best friends Dave Kopushyan, Arman Oganesyan, and Tommy and Gary Rubenyan. Dave, a chef trained in Thomas Keller’s (French Laundry) organization set out to create the perfect Hot Chicken by searching, tasting, and frying. The four friends scrounged up $900 to put a tiny stand in an East Hollywood parking lot. The menu was simple, and the chicken was the star. And what chicken it is! Sourced and prepared to be the juiciest and most tender imaginable with each piece topped with Dave’s own mix of spices ranging from No Spice to “The Reaper.” Arman created Instagram buzz and the lines began to grow. Two nights later, Eater/LA showed up to see what the fuss was about. The next morning's headline read ""East Hollywood's Late Night Chicken Stand Might Blow Your Mind."" Almost instantly, the lines stretched around the block. A year later, the boys had the money to open a shop in a hip strip-mall with décor by local street artists, where the crowds continued to grow with wait-times of an hour and more. From there, the incredibly craveable “Hot and Spicy” varieties have created a cult following with rave reviews across the U.S. and Canada."

Leaf Home Bath is the nations fastest growing one day bath remodeling company.We are continuing to expand nationwide and we are looking for professional remodeling installers in your area now!.Stop spending time chasing down leads, bidding for work and hoping to get the call.Join us at Leaf Home Bat

Come join the best and the biggest team in HVAC: Service Experts Heating, Air Conditioning, & Plumbing!. Installs heating, air conditioning, ventilation, and refrigeration equipment, as well as accessories, in accordance with company requirements and manufacture specifications. Performs start-ups on

A Commercial HVAC Installer is responsible for installing, maintaining, and repairing heating, ventilation, and air conditioning systems in commercial buildings.