Heat jobs in Buffalo, New YorkCreate job alerts

Job DescriptionDescription: Primary Purpose: The Technician is responsible for the maintenance and repair and up-time of Admar Supply and customer equipment. Essential Functions: • Inspect and tag returned rental equipment noting any damage or other necessary repairs., • Using information on repair tag, and with input from Service Writer and Service Manager, troubleshoot equipment and make necessary repairs. Make sure equipment is properly repaired on a timely basis., • Report problems or issues with repairs to Service Manager. Provide detailed description of problem/issue and recommend solution, both short-term and long term., • Ensure all repairs have been fully and properly completed. Perform complete inspection of equipment to make sure no other repairs are needed; safety features are in place and working properly; equipment is clean and decals are readable and unit is rent-ready condition., • Complete all required paperwork on a timely basis; thoroughly complete all forms and reports making sure all entries are correct and legible., • Work in a safe manner obeying all safety rules; keep shop area clean and organized. Correctly use safety equipment and PPE as required., • Ability to define problems, collect data, establish facts. Identify root cause of failure(s), • Ability to interpret and follow instructions, solve problems involving concrete variables within well-defined situations., • Ability to read and understand drawings, schematics and diagrams necessary., • Complete internal and vendor training as assigned., • Be an integral part of “The Admar Experience” Requirements: To be successful in this role the following is preferred: • $18.00 - 22.00 per hour Technician Tier IV: Minimal relevant technician experience; qualified to perform work on a minimal number of products inscope for a technician at this location; primarily engaged in maintenance or basic repairs/diagnostics; requires direct supervision and review of workmanship quality, • $22.00 - 26.00 per hour Technician Tier III: Limited relevant technician experience; qualified to perform work on a moderate number of products inscope for a technician at this location; primarily engaged in maintenance or basic repairs/diagnostics; requires limited direct supervision and review of workmanship quality., • $25.00 - $30.00 per hour Technician Tier II: Relevant technician experience; qualified to perform work on an intermediate number of products inscope for a technician at this location; primarily engaged in moderately complex maintenance and repair; some exposure to moderate or complex diagnostics, requires limited direct supervision, may provide basic training or guidance to new technicians., • High school degree and 1+ years’ experience working in a service environment., • Experience working on construction related equipment preferred., • Experience with small engine repair preferred., • Knowledge of hydraulics and electrical systems preferred., • While performing the duties of this job the employee is regularly required to sit, stand and walk. Employee must be able to lift and carry up to 50 lbs., • The work environment is that of a typical Service Bay. Some exposure to cold, heat, noise, fumes and dust., • Specific vision requirements included close and distance vision, depth perception, peripheral vision and ability to distinguish colors PI4b34ce407c44-25405-40310355

Pride Health is seeking an Sterile Processing Technician supporting 35+ OR suites, AFC units, and clinics In Rochester, NY 14642. You’ll play a vital role in ensuring surgical instruments and equipment are properly decontaminated, sterilized, and ready for patient care using advanced systems like Getinge T-DOC barcode tracking. Key Responsibilities 🧼 Decontaminate, disinfect (HLD), assemble, and sterilize surgical instruments, trays, and equipment 📦 Inspect, package, and prepare surgical case carts per protocol ⚙️ Operate sterilizers and monitor time, temperature, and pressure for quality assurance 🧪 Perform biological testing, interpret results, and maintain documentation 🛠️ Check, adjust, and maintain medical equipment; send items for repair when needed 🚚 Manage inventory, receive supplies, maintain stock levels, and distribute as required 📊 Ensure quality assurance, sterility compliance, and accurate documentation daily 🏭 Equipment You’ll Work With Sterilizers | Ultrasonic washers | Heat sealers | Cart washers | Aerators | Steris units | Surgical tools & repair equipment Require Qualifications ✔️ Certified Sterile Processor (HSPA or CBSPD) ✔️ BLS (American Heart Association only) ❤️ ✔️ Minimum 3 years of Sterile Processing experience ✔️ Experience in a large hospital (500+ beds) ✔️ At least 6 months of travel SPT experience ✈️ ✔️ 2 professional references (recent roles) ⭐ Preferred Qualifications ➕ Level 1 Trauma Center experience ➕ Certified Endoscope Reprocessor (CER) ➕ Orthopedic tray experience Additional Information: Location: Rochester, New York, 14642 Shift Schedule:5x8 (Evenings, weekends, holidays + on-call/callback as needed) Contract Length:13 weeks with possible extension Pay Range:$28.00-$31.05 Interested? Apply now! Pride-Health offers eligible employee’s comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance and hospital indemnity), 401(k)-retirement savings, life & disability insurance, an employee assistance program, legal support, auto, home insurance, pet insurance and employee discounts with preferred vendors. Equal Employment Opportunity Pride-Health is an equal opportunity employer. We do not discriminate on the basis of the race, religious creed, color, national origin, ancestry, physical disability, mental disability, reproductive health decision making, medical condition, genetic information, marital status, sex, gender, gender identity, gender expression, age, sexual orientation, veteran or military status, or any other characteristic protected by applicable federal, state, or local law. Fair Chance Employment Pride-Health is a Fair Chance employer. We consider all qualified applicants, including those with criminal histories, in a manner consistent with applicable state and local Fair Chance laws and ordinances, including, the California Fair Chance Act and all applicable local Fair Chance ordinances. Accommodations We are committed to providing reasonable accommodations to applicants and employees with disabilities. If you require a reasonable accommodation to participate in the application or interview process, or to perform the essential functions of this role, please contact us. Only applicable for San Francisco Candidates: Under the San Francisco Lactation in the Workplace Ordinance, we will provide written notice of lactation accommodation rights, and this notice will automatically be given upon hiring, any inquiry of parental leave or lactation accommodation.

Job Description We're looking for Parts Associates with a minimum of 6 months of professional automotive parts experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As a Mid-Level Parts Associate, you'll be expected to help manage our inventory of parts by: • Sourcing and ordering complex automotive parts, • Managing parts returns and general inventory, • Communicating with dealers and suppliers, • Managing reconciliation and recording of payment for parts At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Pay Range: $18-$19 hourly Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs How To Get Started - Join the Carvana team by applying on this page! We also have a variety of other automotive roles available in one of our 18 locations across the country – take a look at our Careers site to apply for one of the following roles: • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold) To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Project Manager - Metals - Position and Responsibilities As a Project Manager (PM) with Middough, you will serve as a client account manager and will be the primary point of contact for the client and other outside consultants concerning the project(s). The PM is also responsible for the overall development and execution of a portfolio of metals industry projects (typically $1MM+ project fee) including project profitability, quality, safety, client satisfaction, controlling available resources, project scope, schedule, budget and contractual requirements. Additionally, the PM will provide leadership and organization to the project and instill confidence in the client regarding the project team's abilities. Responsibilities include, but are not limited to, the following: • Support business and relationship developments activities of the division., • Coordinate completion of defined work scope for a project between disciplines/locations involved., • Assist in preparation of project execution strategy and reviews progress as drawings and specifications are developed and prior to issue for permit and construction., • Monitor changes in scope/schedule and secures change authorizations, as required., • Manage project financials, pricing, invoicing, and cash flow., • Develop, review, and approve all project management documents including scope development, project costs and schedules, and internal/external communications., • Develop proposals, project specification/scopes and negotiate final contracts., • Monitor project costs and quality to ensure the profitability and technical performance of the project and develop innovative actions to correct variances to scope, budget and/or schedule., • Exercise cost efficient and innovative approaches in the design to save construction costs and improve productivity., • Anticipate, recognize and identify key project issues/problems and establishes objectives and priorities in solving them and determines solutions and directs their implementation., • Prepare periodic reports for the client to track cost, schedule, and quality performance., • Accredited Bachelor of Science degree in Engineering discipline., • 10+ years of project management experience in consulting organizations and within the Metals industry., • Professional Engineering License and/or PMP Certification preferred., • Broad knowledge, understanding and experience with the basic engineering and construction models including A/E, AEPCM, Design Build and/or CM., • Thorough understanding of contract administration, liability, and safety issues., • Working knowledge of Microsoft Office products and Navisworks., • Strong analytical, problem-solving, and attention to detail abilities., • Ability to multitask and organize for project efficiency., • Remain in a stationary position, often standing or sitting for prolonged periods., • Frequently walk, reach with hands and arms, climb stairs, balance, stoop or kneel, twist/bend, use repeating motions that may include the wrists/hands/fingers and talk and hear., • Frequently use up-close vision, distance vision, depth perceptions, and the ability to adjust focus., • Should not expect adverse environmental conditions within company offices., • May be exposed to adverse environmental conditions (such as climbing ladders and/or stairs, extreme heat and/or cold, and/or poor air quality) if or when on-site at a client facility. Safety protections to be provided by the client and/or company and are required to be used and followed., • May require occasional car or air travel to other company locations or client sites. What Middough Offers We offer a growth and learning culture which encourages and supports employee development through a wide variety of tools and resources such as the company Learning Management System, Middough Learning Center. Middough provides an opportunity to bring your talents and expertise to a successful and growing organization for your career advancement goals. Additionally, we offer a highly competitive compensation and the following comprehensive benefits package, based on eligibility and plan terms/changes: • A hybrid work model for work-life flexibility (based on business and client needs), • Medical, Dental, and Vision coverage, • Company paid Short/Long Term Disability, Life, AD&D, and Travel Insurance, • Health Saving and Flexible Spending Accounts, • 401(k) Plan, • Paid Time Off, Company Paid Holidays, • Flexible Start Times, • Tuition Assistance, • Paid Certifications and Registrations (as applicable) Equal Opportunity Employment We are an equal opportunity employer and value diversity at our company. We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, sex, gender identity, sexual orientation, pregnancy, status as a parent, national origin, age, disability (physical or mental), family medical history or genetic information, political affiliation, military service, or other non-merit based factors or any other protected characteristic under protected by federal, state, or local laws. Middough does not support sponsorship for any applicant that requires an employment visa (i.e., H-1B) to work lawfully in the US.

Job DescriptionBenefits: • Dental insurance, • Free uniforms, • Health insurance, • Paid time off, • Training & development, • Vision insurance, • 401(k) matching Duties and Responsibilities include the following: • Directs and controls the daily operations to ensure the school is running according to GSS standard operating procedures., • Helps the General Manager and department managers fulfill all daily tasks., • Manages the staff of GSS to ensure high productivity, excellent performance and positive employee satisfaction., • Oversees employee engagement to maintain a high level of employee satisfaction and company culture., • Oversee training and development of the aquatics department to provide superior swim instruction in accordance with GSS standards., • Interacts with all wet side staff on operational items including class scheduling, student progress, and customer experience., • Able to maintain and troubleshoot proper pool chemistry and pump room operation., • Gains a high level of knowledge and experience in the GSS pool operations necessary to maintain a safe and sanitary swim environment., • Completes evaluations on all teachers and conducts an assessment on all trainees prior to teaching independently., • Directs, trains, maintains and oversees the implementation of the Emergency Action Plan and all safety procedures that pertain to the GSS facility and EAP., • Interacts with the team members on issues related to class scheduling, student progress, customer service and employee performance and training., • Provides sales and marketing training to all qualified sales staff. Works with the Marketing Manager to ensure high levels of customer service and sales performance., • Provides direction in the retail and vending departments to ensure a proper mix of products and pricing is achieved. Assist GM with purchasing., • Trains and oversees private party staff to ensure that the GSS standard operating procedures are being maintained., • Work with GM and Marketing Manager to manage social media, book water safety presentations and events, and build partnerships with local, like-minded businesses., • Oversee monitoring of email, voice messages, and social media to ensure timely and appropriate responses., • Gains knowledge and experience in all technology platforms to achieve a high level of competence in bookings, class scheduling, reporting and administrative functions., • Gains a high level of knowledge of GSS pool operations to ensure understanding and ability to train front desk staff to sell the program and respond to customer concerns., • Initiates and oversees workplace culture and employee interaction. Maintain a high level of employee satisfaction., • Directs and oversees the implementation of the Emergency Action Plan and all safety procedures that pertain to the GSS facility and trains all current staff on the GSS EAP. Certificates and Licenses: Certified Pool Operator and Lifeguard Instructor certifications required. Both certifications must stay up-to-date and current. Work Environment: While performing this job, the employee is regularly exposed to heat and humidity. Noise level is usually moderate. Job Type: Full-time

Job Description Summary: The Assistant Manager supports the Assistant General Manager and General Manager in the daily responsibilities required to keep the business running smoothly. The Assistant Manager directs employees and ensures that work is being completed in a timely and effective manner. Job Expectations: The Assistant Manager performs Leadership, Management, and Organizational tasks while supervising fellow Teammates, monitoring their performance, to ensure they comply with company and safety policies, and delegate tasks appropriately. Duties: • Follow the steps outlined in the DHC Training Program to learn and train new skills, duties, and responsibilities, • Abide by and enforce to the rules and direction given by the Restaurant Management Team and refrains from insubordination, • Communicate to their immediate Supervisor when additional training guidance and practice is needed, • Effectively and consistently does required Ops Walks and Q&A checks to correct areas of opportunity, • Organize shift schedules for Team Members and monitor attendance, tardiness, and time off, • Assign duties to specific Team Members based on role and skills, • Understand how each job responsibility impacts Guests, the Team, and overall Restaurant Operations and success, • Greet Guests, record orders, and serve food and beverages with a consistently positive and helpful attitude, including answering questions, • Ensure Shift Leaders and Team Members work together with their Teammates to prepare items on the DHC menu while following cooking instructions, safety procedures, and sanitary requirements, • Use specific kitchen machinery/equipment such as ice cream dispensers, fryers, warmers, etc., • Ensure Restaurant cleanliness is conducted daily by delegating the clearing of tables, sweeping, and mopping floors, washing/sanitizing/disinfecting kitchen utensils and high touch-point areas, and servicing restrooms, • Handle Guests’ concerns and complaints professionally and calmly to resolve problems according to Restaurant Policy, • Maintain a neat and tidy appearance by wearing a uniform and adhering to the DHC Uniform Policy, • Are performance-oriented and performance driven; understand performance expectations and are aware of performance, • results, • Provide direction, supervision, and feedback to maintain levels of high productivity and Team morale, • Communicate Shift Leader and Team Member work performance to the Restaurant Management Team and appropriately address performance issues, • Train new and current Team Members, • Balance cash drawers and prepare cash deposits as assigned by the Restaurant Management Team, • Assist the Assistant General Manager & General Manager as directed, • Effectively plan, organize, and implement all daily operational routines and activities alongside the Shift Leader, • Complete all required administrative duties and daily paperwork including required checklists, • Supervise and perform closing and/or opening activities as directed by the Restaurant Management Team, • Establish an environment of trust to ensure honest, open, and direct communication, • Role model and set a positive example for the entire Team in all aspects of business and personnel practices, • Follows all company guidelines for food and cash controls; follows all cost control guidelines to maintain and minimize Restaurant costs; properly uses all products, supplies, and equipment facilities, • Current student or high school diploma/GED preferred, • Must be at least 18 years old and fluent in English, • Certified in all stations as a Shift Leader following the DHC Training Program, • Flexibility to work nights, weekends, holidays, opening and closing shifts, • Ability to stand for long periods of time and work in a fast-paced environment, • Ability to bend and stoop and lift 50 - 75 lbs. comfortably, • Ability to work in close quarters and around heat, • Positive attitude while conducting any and all duties, • Commitment to Guest satisfaction. Looks at Restaurant Operations from a Guest’s point of view, • Effective communicator with co-workers and the Restaurant Management Team, • Must have reliable transportation to work, a driver’s license and proof of insurance, • Must have telephone or other reliable method of communicating with Restaurant Management Team and co-workers"About Dave's Hot Chicken Dave’s Hot Chicken was created by best friends Dave Kopushyan, Arman Oganesyan, and Tommy and Gary Rubenyan. Dave, a chef trained in Thomas Keller’s (French Laundry) organization set out to create the perfect Hot Chicken by searching, tasting, and frying. The four friends scrounged up $900 to put a tiny stand in an East Hollywood parking lot. The menu was simple, and the chicken was the star. And what chicken it is! Sourced and prepared to be the juiciest and most tender imaginable with each piece topped with Dave’s own mix of spices ranging from No Spice to “The Reaper.” Arman created Instagram buzz and the lines began to grow. Two nights later, Eater/LA showed up to see what the fuss was about. The next morning's headline read ""East Hollywood's Late Night Chicken Stand Might Blow Your Mind."" Almost instantly, the lines stretched around the block. A year later, the boys had the money to open a shop in a hip strip-mall with décor by local street artists, where the crowds continued to grow with wait-times of an hour and more. From there, the incredibly craveable “Hot and Spicy” varieties have created a cult following with rave reviews across the U.S. and Canada."

Job Description We're hiring for entry-level automotive roles at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. In these entry-level roles, you'll have several positions to choose from: • Detailer: detailing vehicles, including washing, interior cleaning, and exterior buffing, • Lot Attendant: move vehicles from one department to the next in our Inspection Centers, • Photobooth Associate: take photos of our vehicles so customers can see our vehicles in our spinners, • Inspection Associate: inspect the interior and exterior of the vehicles and accurately identify any imperfections/defects General qualifications and requirements • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold) Pay Range: $17-$18 hourly Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs The starting pay range is $18-$19 hourly Schedule: We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started - join the Carvana team by applying on this page! We also have a variety of other automotive roles available in one of our many locations across the country – take a look at our Careers site to apply for one of the following roles: • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job DescriptionDescription: Department: Food & Beverage Job Status: Seasonal Reports To: Executive Chef/Sous Chef Position: Seasonal Cook (Pool/Golf Course) Work Schedule: Must be available to work weekdays, weekends, and holidays throughout the season. Season is from May to October Salary: $18-$20 per hour Job Summary We are looking for a reliable, high-energy Seasonal Line Cook to join our culinary team for the summer season. Park Country Club has two seasonal dining outlets located at our pool or on the golf course at our Halfway House as golfers transition from the front to back of the golf course. This dual-role position involves preparing fresh, high-quality menu items in a fast-paced poolside environment and/or managing food service at our golf course halfway house. The ideal candidate is a self-motivated professional who can work independently and maintain high standards of quality and cleanliness. There is the opportunity for a candidate to become a full-time non-seasonal staff member should they be deemed a good fit after the summer season. Essential Duties & Responsibilities • Food Preparation: Prepare, season, and cook menu items (e.g. sandwiches, burgers, salads, snacks) according to established recipes and presentation standards., • Station Management: Set up, stock, and break down the pool kitchen and/or halfway house stations daily., • Independent Operation: Manage food service at the halfway house, including cooking items like hot dogs and breakfast sandwiches and assembling "on the turn" sandwiches without main kitchen support., • Sanitation & Safety: Maintain a clean and sanitized workspace in accordance with ServSafe or health department regulations., • Inventory Control: Label, date, and rotate stock using the FIFO method; monitor ingredient freshness and notify supervisors of low stock., • Member Service: Interact professionally with club members and guests, providing attentive and friendly service in an open-kitchen or outdoor setting., • Availability: Must be available to work weekdays, weekends and holidays throughout the season., • Experience: 1+ years of line cook or short-order experience, preferably in a country club, hotel, or fast-paced resort environment., • Skills: Proficient knife skills and knowledge of various cooking methods (grilling, frying, sauteing)., • Physical Stamina: Ability to stand for 8-10 hours and work in an outdoor kitchen environment subject to summer heat., • Certification: Food Handlers card or ServSafe certification preferred., • Professionalism: Must be at least 18 years old and maintain a neat, well-groomed appearance.

Senior Structural Engineer - Position and Responsibilities As a Senior Structural Engineer with Middough, you will collect and prepare data/information and perform detailed engineering calculations. The Senior Structural Engineer will also perform basic engineering design for review and approval by senior department team members. The Senior Structural Engineer will also demonstrate technical/professional growth through active membership in professional organizations and participating in technical seminars/courses. Responsibilities include, but are not limited to, the following: • Collect and prepare data/information and perform detailed engineering calculations., • May serve as Project Lead for select single-discipline projects by estimating work hours, developing scope of work, making staffing recommendations, and checking drawings., • Assist with field work, checking installations, and problem-solving activities., • Interact and collaborate with internal departments and project teams as well as external suppliers to obtain required project information., • Manage the scope of the project work, address scope and work changes, adjust the project deliverables as necessary, and complete the project work based on the budget and scheduled time frame., • Bachelor of Science in Structural or Civil engineering required., • PE license preferred., • 10+ years of experience performing engineering analysis and design functions., • Experience in heavy industrial arenas such as Metals, Petroleum Refineries, Specialty Chemicals, Power, Food and Manufacturing Industries., • Experience with design of steel and concrete structures, STAAD structural analysis software, Revit building information modeling software, and Navisworks 3D design review software., • Knowledge of appropriate design codes (AISC, ACI, ASCE, International Building Code (IBC), OSHA etc.), • Working knowledge of Microsoft Office products., • Excellent analytical, problem-solving, and attention to detail abilities., • Excellent multitasking and organizational abilities for project efficiency., • Remain in a stationary position, often standing or sitting for prolonged periods., • Frequently walk, reach with hands and arms, climb stairs, balance, stoop or kneel, bend or twist, use repeating motions that may include the wrists/hands/fingers and talk and hear., • Frequently use up-close vision, distance vision, depth perceptions, and the ability to adjust focus., • Should not expect adverse environmental conditions within company offices., • May be exposed to adverse environmental conditions (such as climbing ladders and/or stairs, extreme heat and/or cold, and/or poor air quality) if or when on-site at a client facility. Noise levels may be moderate to high at various client sites, hearing protection may be required and/or provided. Safety protections provided by the client and/or company are required to be used and followed., • May require occasional car or air travel to other company locations or client sites. What Middough Offers We offer a growth and learning culture which encourages and supports employee development through a wide variety of tools and resources such as the company Learning Management System, Middough Learning Center. Middough provides an opportunity to bring your talents and expertise to a successful and growing organization for your career advancement goals. Additionally, we offer a highly competitive compensation and the following comprehensive benefits package, based on eligibility and plan terms/changes: • A hybrid work model for work-life flexibility (based on business and client needs), • Medical, Dental, and Vision coverage, • Company paid Short/Long Term Disability, Life, AD&D, and Travel insurance, • Health Saving and Flexible Spending Accounts, • 401(k) Plan, • Paid Time Off, Company Paid Holidays, • Tuition Assistance, • Paid Certifications and Registrations (as applicable) Equal Opportunity Employment We are an equal opportunity employer and value diversity at our company. We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, sex, gender identity, sexual orientation, pregnancy, status as a parent, national origin, age, disability (physical or mental), family medical history or genetic information, political affiliation, military service, or other non-merit based factors or any other protected characteristic under protected by federal, state, or local laws. Middough does not support sponsorship for any applicant that requires an employment visa (i.e., H-1B) to work lawfully in the US.

Electrical Engineering Manager - Position and Responsibilities As an Electrical Engineering Manager with Middough, you will direct and manage the work of a team to complete work on time, within budget, in accordance with applicable codes/standards, and per Middough work processes and guidelines. The Electrical Engineering Manager will also administer corporate policy as required, develop, and implement long term employee development plans and objectives, provide technical and management leadership, assists staff in solving complex problems through technology, lessons learned, development of best practices, and drives all related efforts in the advancement toward technical and project execution excellence. Responsibilities include, but are not limited to, the following: • Plan, develop, coordinate, and direct team members to the successful completion of projects., • Collaborate with senior management in coordinating work for projects., • Determine department technical staffing needs and collaborate with HR to recruit and interview candidates., • Coach and develop team members using best practices, performance management, supportive behavior, and training tools., • Participate in planning, cost-development, project management and scheduling for assigned projects, • Use company work processes to provide quality checks and reviews of all assigned projects., • Manage quality and accuracy standards for the electrical department and review and approve completed technical deliverables., • Perform technical analysis and solutions for complex or unique projects., • Secure peer review to help guarantee quality products are produced per client, industry, and company expectations., • Use scheduling and earned value tool(s) to help ensure forecasting is predictable and projects are completed on time and per budget., • Develop client rapport by providing valued technical and managerial solutions., • Take an active role as needed in support of business development activities to keep team productive., • Accredited Bachelor of Science degree in Electrical Engineering., • Professional Engineer license preferred., • 15+ years of experience in electrical engineering. Preferred areas of knowledge to include Power distribution, system modeling & analysis, protective relay coordination, energy audits, substation design, facility design, Class I, Division I & Division II design, equipment specification, equipment layout, lighting, lightning protection, energy management systems, start-up, and the application of NEC., • 5+ years of people management experience and project team management experience., • Experience with Front End Engineering and Design or Front-End Loading studies., • Working knowledge of Microsoft Office., • Excellent analytical, problem-solving, and attention to detail abilities., • Excellent multitasking and organizational abilities for project efficiency., • Remain in a stationary position, often standing or sitting for prolonged periods., • Frequently walk, reach with hands and arms, climb stairs, balance, stoop or kneel, bend or twist, use repeating motions that may include the wrists/hands/fingers and talk and hear., • Frequently use up-close vision, distance vision, depth perceptions, and the ability to adjust focus., • Should not expect adverse environmental conditions within company offices., • May be exposed to adverse environmental conditions (such as climbing ladders and/or stairs, extreme heat and/or cold, and/or poor air quality) if or when on-site at a client facility. Noise levels may be moderate to high at various client sites, hearing protection may be required and/or provided. Safety protections provided by the client and/or company are required to be used and followed., • May require occasional car or air travel to other company locations or client sites. What Middough Offers We offer a growth and learning culture which encourages and supports employee development through a wide variety of tools and resources such as the company Learning Management System, Middough Learning Center. Middough provides an opportunity to bring your talents and expertise to a successful and growing organization for your career advancement goals. Additionally, we offer a highly competitive compensation and the following comprehensive benefits package, based on eligibility and plan terms/changes: • A hybrid work model for work-life flexibility (based on business and client needs), • Medical, Dental, and Vision coverage, • Company paid Short/Long Term Disability, Life, AD&D, and Travel insurance, • Health Saving and Flexible Spending Accounts, • 401(k) Plan, • Paid Time Off, Company Paid Holidays, • Tuition Assistance, • Paid Certifications and Registrations (as applicable) Equal Opportunity Employment We are an equal opportunity employer and value diversity at our company. We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, sex, gender identity, sexual orientation, pregnancy, status as a parent, national origin, age, disability (physical or mental), family medical history or genetic information, political affiliation, military service, or other non-merit based factors or any other protected characteristic under protected by federal, state, or local laws. Middough does not support sponsorship for any applicant that requires an employment visa (i.e., H-1B) to work lawfully in the US.

Senior Piping Designer - Position and Responsibilities As a Senior Piping Designer with Middough, you will create and establish complex designs consistent with good practices, client requirements and conformance to Codes & Standards. In this role, you will also apply standard drafting techniques to generate and interpret drawings in support of assigned projects and provide guidance and leadership to drafters and designers to ensure that all established Company design standards and practices are followed. Responsibilities include, but are not limited to, the following: • Work with discipline leads to establish budgets for tasks and deliverables and make sure they are distributed and maintained., • Coordinate work of other lead designers assigned to the task., • CAD Design of basic equipment layouts, piping routings that are consistent with codes, standards, and client requirements., • Ensure that discipline leads have the correct project standards and checklists. Maintain and update the overall 3D model as required., • Participate in meetings with clients as requested by Project Manager., • Adhere to all QA / QC standards., • Associates Degree in drafting or design with 10+ years of relevant experience., • Hands-on experience in developing equipment, overall facility layouts, preparation of overall 3D piping model, preparation of orthographic drawings, isometrics, bill of materials, and selection and design of piping supports., • Strong understanding of piping systems for industrial systems., • Hands-on experience with 3D design products like CADWorx, Plant 3D or Autoplant., • Experience in designs of industrial facilities, natural gas treatment, oil and gas or power industries, • Working knowledge of Earned Value for project performance monitoring., • Working knowledge of Microsoft Office products., • Ability to multi-task and be highly organized for effective project planning., • Excellent attention to detail and written communication skills., • Remain in a stationary position, often standing or sitting for prolonged periods., • Frequently walk, reach with hands and arms, climb stairs, balance, stoop or kneel, bend/twist, use repeating motions that may include the wrists/hands/fingers and talk and hear., • Frequently use up-close vision, distance vision, depth perceptions, and the ability to adjust focus., • Should not expect adverse environmental conditions within company offices., • May be exposed to adverse environmental conditions (such as climbing ladders and/or stairs, extreme heat and/or cold, and/or poor air quality) if or when on-site at a client facility. Noise levels may be moderate to high at various client sites, hearing protection may be required and/or provided. Safety protections provided by the client and/or company are required to be used and followed., • May require occasional car or air travel to other company locations or client sites. What Middough Offers We offer a growth and learning culture which encourages and supports employee development through a wide variety of tools and resources such as the company Learning Management System, Middough Learning Center. Middough provides an opportunity to bring your talents and expertise to a successful and growing organization for your career advancement goals. Additionally, we offer a highly competitive compensation and the following comprehensive benefits package, based on eligibility and plan terms/changes: • A hybrid work model for work-life flexibility (based on business and client needs), • Medical, Dental, and Vision coverage, • Company paid Short/Long Term Disability, Life, AD&D, and Travel Insurance, • Health Saving and Flexible Spending Accounts, • 401(k) Plan, • Paid Time Off, Company Paid Holidays, • Tuition Assistance, • Paid Certifications and Registrations (as applicable), • Employee Assistance ProgramMiddough participates in the Department of Homeland Security (DHS) and Social Security Administration (SSA) E-Verify program to confirm work authorization. Equal Opportunity Employment We are an equal opportunity employer and value diversity at our company. We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, sex, gender identity, sexual orientation, pregnancy, status as a parent, national origin, age, disability (physical or mental), family medical history or genetic information, political affiliation, military service, or other non-merit based factors or any other protected characteristic under protected by federal, state, or local laws. Middough does not support sponsorship for any applicant that requires an employment visa (i.e., H-1B) to work lawfully in the US.

Senior Structural Designer - Position and Responsibilities As a Senior Structural Designer with Middough, you will create and establish simple designs consistent with good practices, client requirements and conformance to Codes & Standards. The Senior Structural Designer will also apply standard drafting techniques to generate and interpret drawings in support of assigned projects and provide guidance and leadership to drafters to ensure that all established company and client design standards and practices are followed Responsibilities include, but are not limited to, the following: • Collaborate with engineers to develop design drawings for steel supports, platforms, and concrete foundations using primarily 3D laser scanning (some field measurements) and CAD software's., • Complete design work on fast paced, smaller projects for a variety of industrial and chemical plant clients., • Serve as lead for select single-discipline projects by estimating work hours, developing scope of work, making staffing recommendations, and maintaining quality processes., • Interact with company departments/colleagues and suppliers to obtain pertinent design and project information., • Associate Degree in a technical discipline or equivalent required., • 8 - 15 years of relevant design work experience., • Proficient in computer functions required to perform 3-D CAD, and Revit design of structural steel and foundation design on a variety of commercial, institutional, and industrial facilities., • Design experience with masonry, concrete, steel, fiberglass, and wood structures is beneficial., • Working knowledge of Codes and Standards., • Working knowledge of reference documents and guides., • Working knowledge of Microsoft Office products., • Strong analytical, problem-solving, and attention to detail abilities., • Ability to multitask with organizational abilities for project efficiency., • Remain in a stationary position, often standing or sitting for prolonged periods., • Frequently walk, reach with hands and arms, climb stairs, balance, stoop or kneel, bend or twist, use repeating motions that may include the wrists/hands/fingers and talk and hear., • Frequently use up-close vision, distance vision, depth perceptions, and the ability to adjust focus., • Should not expect adverse environmental conditions within company offices., • May be exposed to adverse environmental conditions (such as climbing ladders and/or stairs, extreme heat and/or cold, and/or poor air quality) if or when on-site at a client facility. Noise levels may be moderate to high at various client sites, hearing protection may be required and/or provided. Safety protections provided by the client and/or company are required to be used and followed., • May require occasional car or air travel to other company locations or client sites. What Middough Offers We offer a growth and learning culture which encourages and supports employee development through a wide variety of tools and resources such as the company Learning Management System, Middough Learning Center. Middough provides an opportunity to bring your talents and expertise to a successful and growing organization for your career advancement goals. Additionally, we offer a highly competitive compensation and the following comprehensive benefits package, based on eligibility and plan terms/changes: • A hybrid work model for work-life flexibility (based on business and client needs), • Medical, Dental, and Vision coverage, • Company paid Short/Long Term Disability, Life, AD&D, and Travel insurance, • Health Saving and Flexible Spending Accounts, • 401(k) Plan, • Paid Time Off, Company Paid Holidays, • Tuition Assistance, • Paid Certifications and Registrations (as applicable) Equal Opportunity Employment We are an equal opportunity employer and value diversity at our company. We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, sex, gender identity, sexual orientation, pregnancy, status as a parent, national origin, age, disability (physical or mental), family medical history or genetic information, political affiliation, military service, or other non-merit based factors or any other protected characteristic under protected by federal, state, or local laws. Middough does not support sponsorship for any applicant that requires an employment visa (i.e., H-1B) to work lawfully in the US.

Senior Electrical Engineer - Position and Responsibilities As a Senior Electrical Engineer with Middough, you will perform engineering design within industrial power systems to include focus on AC power systems from 120V-15kV as well as PLC control systems with review/approval by a senior engineer. Responsibilities include, but are not limited to, the following: • Collect and prepare data/information and perform detailed engineering calculations (short circuit, voltage drop, cable/conduit/cable tray sizing, arc flash, lighting, heat trace, etc.)., • Design detailed drawing packages including electrical one-line diagrams, installation details, bills of material, panel schedules, lighting plans, motor schematics, conduit/cable plans, field wiring diagrams, etc., • Create specifications for various electrical equipment such as transformers, switchgear, motor control centers, etc., • Complete designs using the National Electric Code and other applicable standards., • Work with and provide direction to electrical designers., • Engineering Technology degree or Bachelor of Science in Electrical Engineering required with a focus in power systems., • 10+ years of Electrical Engineering experience., • PE license preferred., • Working knowledge of Microsoft Office products., • Strong analytical, problem-solving, and attention to detail abilities., • Strong organization and multitasking skills., • Remain in a stationary position, often standing or sitting for prolonged periods., • Frequently walk, reach with hands and arms, climb stairs, balance, stoop or kneel, bend or twist, use repeating motions that may include the wrists/hands/fingers and talk and hear., • Frequently use up-close vision, distance vision, depth perceptions, and the ability to adjust focus., • Should not expect adverse environmental conditions within company offices., • May be exposed to adverse environmental conditions (such as climbing ladders and/or stairs, extreme heat and/or cold, and/or poor air quality) if or when on-site at a client facility. Noise levels may be moderate to high at various client sites, hearing protection may be required and/or provided. Safety protections provided by the client and/or company are required to be used and followed., • May require occasional car or air travel to other company locations or client sites. What Middough Offers We offer a growth and learning culture which encourages and supports employee development through a wide variety of tools and resources such as the company Learning Management System, Middough Learning Center. Middough provides an opportunity to bring your talents and expertise to a successful and growing organization for your career advancement goals. Additionally, we offer a highly competitive compensation and the following comprehensive benefits package, based on eligibility and plan terms/changes: • A hybrid work model for work-life flexibility (based on business and client needs), • Medical, Dental, and Vision coverage, • Company paid Short/Long Term Disability, Life, AD&D, and Travel insurance, • Health Saving and Flexible Spending Accounts, • 401(k) Plan, • Paid Time Off, Company Paid Holidays, • Tuition Assistance, • Paid Certifications and Registrations (as applicable) Equal Opportunity Employment We are an equal opportunity employer and value diversity at our company. We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, sex, gender identity, sexual orientation, pregnancy, status as a parent, national origin, age, disability (physical or mental), family medical history or genetic information, political affiliation, military service, or other non-merit based factors or any other protected characteristic under protected by federal, state, or local laws. Middough does not support sponsorship for any applicant that requires an employment visa (i.e., H-1B) to work lawfully in the US.

Job Description We are seeking a mid‐level Assembly Technician to build custom and one‐of‐a‐kind heat transfer systems. This is not an assembly‐line position. Each unit is unique and requires hands‐on mechanical skill, attention to detail, and the ability to follow technical documentation. Assemblies are completed independently and in small teams using flow schematics, electrical drawings, photos, and other job aids. Work is performed using a variety of hand tools, electric tools, and pneumatic tools. Due to the specialized and custom nature of our products, training can b longer‐term and in‐depth. Unit completion expectations range from 10-80 hours per. Company Description70 years leading in Custom Heat Transfer. We do what most won't or can't do.70 years leading in Custom Heat Transfer. We do what most won't or can't do.

Job DescriptionDescription: Warehouse Associate – Buffalo, NY $18.00/hr - $24.00/hr + Monthly Bonus Opportunities Monday – Friday Schedule (No Weekends) Health, Dental, Vision, 401(k) w/Match, PTO and More! Join a Team that Powers Possibility! At Haun Welding Supply & Specialty Gases, we’ve been proudly supporting customers across New York and the Northeast since 1958 – delivering quality, safety, and service you can depend on. We’re more than a supplier; we’re a team driven by Helpfulness, Humility, Heart, and Honesty – the values that make us who we are. We’re looking for a dependable and detail-oriented Warehouse Associate to support our shipping and receiving operations. If you enjoy hands-on work, staying organized, and being part of a team that keeps things moving efficiently, this role could be a great fit. What You’ll Do In this role, you’ll play a key part in ensuring products are received, processed, and shipped accurately and on time. Responsibilities include: • Receive incoming shipments and verify product accuracy against packing slips, • Inspect goods for damage and report discrepancies, • Pick, pack, and prepare customer orders and branch transfers for shipment, • Load and unload trucks safely and efficiently, • Label, stage, and organize outgoing shipments, • Maintain accurate inventory through proper handling and system updates, • Keep the warehouse clean, organized, and compliant with safety standards, • Complete shipping/receiving paperwork with attention to detail, • Coordinate with team members and other departments to ensure smooth workflow, • Perform other general warehouse duties as neededRequirements: What You’ll Bring If you take pride in hands-on work, value safety and teamwork, and want to grow with a company that invests in its people, we’d love to hear from you. • You are 18 years or older, • High school diploma or equivalent, • Strong attention to detail and accuracy, • Ability to communicate clearly, both written and verbally, • Basic computer skills (email, data entry, simple navigation), • Ability to work independently and as part of a team, • Strong organizational and time-management skills, • Willingness to follow procedures and safety guidelines, • Valid NYS driver’s license (must be maintained throughout employment), • A commitment to uphold Haun values: Helpful, Humble, Heart-driven, and Honest, • Prior warehouse or shipping/receiving experience is a plus, but not required Physical Requirements • Ability to stand, walk, bend, reach and perform repetitive motions for extended periods of time, • Ability to lift, carry, push, and pull items weighing up to 50lbs, • Ability to operate production equipment, hand tools, and machinery safely, • Ability to perform tasks that require manual dexterity and attention to detail, • Ability to safely navigate the production areas, including stairs, platforms, and workstations, • Perform work in a fast-paced, safety-sensitive production environment including exposure to industrial conditions including heat, cold, noise, and varying temperatures, • Required PPE and adherence to strict safety procedures Haun Welding Supply & Specialty Gases is proud to be an Equal Opportunity Employer. We value diversity and are committed to fostering an inclusive workplace where all employees and applicants are treated with respect. We do not discriminate or tolerate harassment based on race, color, religion, national origin, sex, genetics, disability status, sexual orientation, gender identity or expression, protected veteran status, or any other characteristic protected by law. This policy applies to all employment-related activities, from application and hiring through ongoing employment.

Job Description Ready to grow your career with Complete Lawn & Yard Care, Inc., a high-rated landscaping company? Complete Lawn & Yard Care, Inc., a trusted name for over 29 years, is looking for a driven individual who is passionate about delivering top-notch service. We are looking to hire the right candidate ASAP! Job Description: Lawn maintenance worker & Landscaper Type: Seasonal Location: Cheektowaga Responsibilities: • Perform lawn care duties such as cutting grass, trimming edges, and blowing trimmings, • Assist with landscaping tasks such as weeding, planting, mulching, pruning and trimming small trees, shrubs, and hedges to maintain shape and promote healthy growth, • Operate equipment and tools safely and responsibly including lawn mowers, line trimmers, hedge trimmers, backpack blowers, shovels, and rakes, • Load and unload equipment as needed and assist with proper securement of equipment from service vehicles, • Assist in the setup and cleanup of job sites, ensuring all tools and materials are properly stored Requirements: • Valid driver’s license and reliable transportation are required, • Prior landscaping and lawn care experience is a plus, • Ability to work both independently with little supervision, and as part of a team, • Strong attention to detail and a commitment to quality work, • Excellent time management skills, • Must be able to work in a fast paced environment Work Environment: • Ability to perform physical labor in various weather conditions including heat, cold, and humidity. You will encounter fluctuating weather patterns and work in both wet and dry environments. This role also involves frequent exposures to high noise levels from equipment and machinery, as well as vibrations from the use of power tools, • Atmospheric conditions, such as dust, pollen, and fumes from machinery Physical Demands: • This position requires various physical activities including standing, bending, kneeling, lifting, carrying, pushing, pulling, and walking for extended periods of time, • Must be able to lift, pull, and push materials and equipment, • Able to lift 50 lbs What we offer: • The pay range for this position is $25-$30/hour and is dependent on your experience, • Clothing/uniforms provided (shirts and sweatshirts with company logo, gloves, and safety glasses), • Weekly pay on Fridays, • Flexible full-time or part-time seasonal scheduling, • Very little weekend work (except as needed for weather and workload), • Positive, team-oriented work environment If you are ready to work hard, take pride in your work, and be a part of a team that values respect, integrity, and excellence - we would love to hear from you!

Job DescriptionDescription: Snyder Industries, Inc., has openings for CNC Machinists. At Snyder Industries we are serious about our commitment to our employees. We are aligning ourselves to be an employer of choice among manufacturers and want to help you grow both personally and professionally. Available benefits include: Work/life balance with optional overtime Flexible schedule Double-time pay for all hours worked over 48 in a workweek 15% shift differential Quarterly Bonuses Medical ( 100% paid option available) Dental and Vision Life Insurance Paid Time Off A rewarding 401(k) program Annual work boot allowance Onsite Fitness Center Onsite Cafeteria Life Resources through our EAP Apply now to join our team of growing professionals and work for a company you’ll be proud of! An industry leader with over 50 years of experience, we specialize in providing high quality components for the heavy equipment industry utilizing our updated mills, lathes, gear and heat treating/induction machinery. If you desire a team atmosphere and want to excel, look no further! In our climate-controlled shop we offer OT instead of mandating it, making our employees and their needs a top priority to align with the realistic goals set by our customers. We set the bar high for both safety and cleanliness. Requirements: Objective: Produces machined parts by setting up and operating computer numerical controlled (CNC) machines, maintaining quality, efficiency, and safety standards as well as maintaining equipment and supplies. Role & Responsibilities: Plans machining by studying work orders, blueprints, engineering plans, materials, specifications, locations of surfaces, and machining parameters. Sets up mills and lathes by entering instructions, including zero reference points, setting tool registers, offsets, compensation and conditional switches, calculating requirements, including basic math, geometry, and trigonometry, proving part programs. Sets up mills and lathes by installing and adjusting three and four jaw chucks, tools, and attachments. Verifies settings by measuring first run parts and sample work pieces, adhering to established standards. Maintains specifications by observing drilling, grooving, and cutting, including turning, facing, knurling, and thread chasing operations, detecting malfunctions, troubleshooting processes, replacing worn tools, and adhering to quality assurance procedures and processes. Maintains equipment by completing minor preventive maintenance requirements, notifying maintenance of issues and completing maintenance request forms. Maintains continuity between shifts by communicating job status, irregularities, and continuing needs. Completes production and quality logs as required Maintains safe operations by adhering to safety procedures and regulations. Handles miscellaneous duties as required. Education & Experience: High School diploma or equivalency Skills & Abilities: Must be able to grasp conceptual items Must be able to follow G Code Participate in process improvement Must have good communication skills Possess a good mechanical aptitude Applies tooling coordination requirements Gives attention to detail Must be able to stand, stoop, bend, twist, reach, as well as wrench parts Ability to lift up to 50lbs occasionally Position Type/Expected Hours of Work: Hourly M-Th- 3 pm - 11: 30 pm, F 2:30 pm - 11 pm (2nd shift hours) Optional Overtime Equal Employment Opportunity Statement: Snyder Industries provides equal employment opportunity to all applicants and employees without regard to race, color, gender, age, disability, religion, creed, national origin, genetic predisposition, marital status, sexual orientation, victims of domestic violence, gender identity, gender expression, political belief or activity, veteran status, victims of domestic violence, familial status or any other status protected by law.

Ingersoll Rand is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Job Title: Centrifugal Assembler/Welder Location: Buffalo, NY Schedule: Monday - Friday 7:00AM - 3:30 PM Pay Range: Starting Pay will range between $27.00 - $32.00 per hour depending on qualifications and experience. This is a full-time, hourly position. About Us: Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: We are looking for a skilled Assembler with MIG and TIG welding experience to perform a variety of tasks in conjunction with the assembly of our products. This role is responsible for assembling components, performing MIG and TIG welding as required, and ensuring all parts fit correctly and meet quality specifications for the final product. The ideal candidate will safely perform high-level, continuous production work while maintaining strict adherence to quality and safety standards. Assignments may vary based on business demands. Responsibilities: • Perform assembly and testing of industrial machinery and compression equipment following standard work procedures., • Read and interpret blueprints, method sheets, diagrams, and specifications to assemble components accurately., • Operate pneumatic, power, and hand tools to complete assembly, welding, wiring, painting, and related tasks., • Inspect parts and finished products to detect quality defects and ensure compliance with safety standards., • Load and unload equipment using fork trucks and hoists; support material handling and inventory activities., • Maintain tools and equipment, initiate repair work orders as needed, and ensure proper upkeep., • Maintain a safe, clean work environment in compliance with all safety rules and procedures., • Collaborate with team members, support cross-functional tasks, and contribute to process improvement initiatives. Requirements: • High School Diploma or General Equivalent Diploma (GED) is required., • Familiar with and ability to utilize all hand tools including wrenches, sockets, hammers, tape measures, crimpers, cutters, and steel banding., • MIG & TIG welding., • 3+ years experience welding to exact ASME specifications., • Must know proper purging techniques for stainless steels., • Must be able to lift up to 25 pounds from floor to waist. Occasionally required to lift up to 50 pounds. Core Competences: • Knowledge of and willingness to comply with all general work rules, policies and procedures, including safety guidelines and procedures., • Able to rely on experience and judgment to plan and accomplish goals., • Ability to learn to operate all equipment associated with the job; including, but not limited to, power hand tools, forklifts, skyjacks, cranes, and measuring devices., • Ability to identify routine problem causation, and correct routine problems, and willingness to learn., • Broad working knowledge and experience with standard work instructions., • Team oriented, must have the ability to work cohesively with others., • Must possess ability to work well in a manufacturing environment., • Must be detail-oriented and self-motivated., • Must be able to work in a multi-tasked environment. Preferences: • 3+ years in manufacturing experience preferred., • Prior experience in mechanical assembly, electrical wiring, precision measurement, blueprint reading and pipefitting is preferred., • Ability to complete X-ray quality work to ASME B31.3, • Knowledgeable of and able to utilize computer systems., • Frequently required to sit, stand, and walk for extended periods., • Reaching and handling with high levels of dexterity., • Occasionally required to work near moving mechanical equipment., • Frequent exposure to various chemicals, sealants, and lubricants., • Occasionally required to work outside where weather conditions range from moderate cold to moderate heat., • Normal exposure to moderate noise levels. Occasional exposure to high noise, levels where hearing protection will be required. Pay Range: Starting Pay will range between $27.00 - $32.00 per hour depending on qualifications and experience. This is a full-time, hourly position. What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit . APPLY NOW

Ingersoll Rand is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Job Title: Centrifugal Assembler Location: Buffalo, NY Schedule: Monday - Friday 7:00AM - 3:30 PM Pay Range: Starting Pay will range between $28.00 - $32.00 per hour depending on qualifications and experience. This is a full-time, hourly position. About Us: Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: We are looking for a skilled Assembler with MIG and TIG welding experience to perform a variety of tasks in conjunction with the assembly of our products. This role is responsible for assembling components, performing MIG and TIG welding as required, and ensuring all parts fit correctly and meet quality specifications for the final product. The ideal candidate will safely perform high-level, continuous production work while maintaining strict adherence to quality and safety standards. Assignments may vary based on business demands. Responsibilities: • Perform assembly and testing of industrial machinery and compression equipment following standard work procedures., • Read and interpret blueprints, method sheets, diagrams, and specifications to assemble components accurately., • Operate pneumatic, power, and hand tools to complete assembly, welding, wiring, painting, and related tasks., • Inspect parts and finished products to detect quality defects and ensure compliance with safety standards., • Load and unload equipment using fork trucks and hoists; support material handling and inventory activities., • Maintain tools and equipment, initiate repair work orders as needed, and ensure proper upkeep., • Maintain a safe, clean work environment in compliance with all safety rules and procedures., • High School Diploma or General Equivalent Diploma (GED) is required., • Familiar with and ability to utilize all hand tools including wrenches, sockets, hammers, tape measures, crimpers, cutters, and steel banding., • MIG & TIG welding., • 3+ years experience welding to exact ASME specifications., • Must know proper purging techniques for stainless steels., • Knowledge of and willingness to comply with all general work rules, policies and procedures, including safety guidelines and procedures., • Able to rely on experience and judgment to plan and accomplish goals., • Ability to learn to operate all equipment associated with the job; including, but not limited to, power hand tools, forklifts, skyjacks, cranes, and measuring devices., • Ability to identify routine problem causation, and correct routine problems, and willingness to learn., • Broad working knowledge and experience with standard work instructions., • Team oriented, must have the ability to work cohesively with others., • Must possess ability to work well in a manufacturing environment., • Must be detail-oriented and self-motivated., • 3+ years in manufacturing experience preferred., • Prior experience in mechanical assembly, electrical wiring, precision measurement, blueprint reading and pipefitting is preferred., • Ability to complete X-ray quality work to ASME B31.3, • Knowledgeable of and able to utilize computer systems., • Frequently required to sit, stand, and walk for extended periods., • Reaching and handling with high levels of dexterity., • Occasionally required to work near moving mechanical equipment., • Frequent exposure to various chemicals, sealants, and lubricants., • Occasionally required to work outside where weather conditions range from moderate cold to moderate heat. What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit . What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. APPLY NOW

Job Description We're looking for automotive mechanics with a minimum of 3 years of professional automotive repair experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As an Experienced Auto Technician, you will perform a full range of automotive repairs—from light maintenance to heavy engine work—and diagnostics on our vehicles, including: • Performing general to complex repairs on all makes and models, ranging from timing belts and suspension systems to heavy engine work., • Diagnosing and repairing advanced vehicle electrical issues, including work on electric and hybrid vehicles. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs $4,000-$6,000 bonus depending on experience We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started Join the Carvana team by applying on this page, or call one of our recruiters by phone at (888) 508-4749, Monday through Friday, between 6 AM and 4 PM MST. Not a match for this role? We have a variety of Technician roles in our Inspection Centers, depending on your level of experience - take a look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers. • Entry-Level Auto Technician (min 6 months professional experience): perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process. General qualifications and requirements • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold) To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English

Job Description We're looking for Automotive Mechanics with a minimum of 1 year of professional automotive repair experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As a Brake & Tire Technician, you'll be expected to perform light maintenance or repairs, including changing brakes and tires and performing: • Technician services, such as routine inspections/maintenance, • Basic mechanical repair for brake pads/calipers/rotors, tire installations, and wheel alignments At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Pay Range: $20-$23 hourly Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment Schedule: We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started Join the Carvana team by applying on this page, or call one of our recruiters by phone at (888) 508-4749, Monday through Friday, between 6 AM and 4 PM MST. Not a match for this role? We have a variety of Technician roles in our Inspection Centers, depending on your level of experience - take a look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers: • Entry-Level Auto Technician (min 6 months professional experience): perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process., • Brake and Tire Technician (min 1 year professional experience): perform light maintenance or repairs, including changing brakes and tires, • Mid-Level (Mechanical Repair / Build / General) Technician (min 3 years of professional experience): perform light to medium automotive repairs and minimal diagnostics on our vehicles, • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold) To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description We're looking for Automotive Mechanics with a minimum of 1 year of professional automotive repair experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As a Brake & Tire Technician, you'll be expected to perform light maintenance or repairs, including changing brakes and tires and performing: • Technician services, such as routine inspections/maintenance, • Basic mechanical repair for brake pads/calipers/rotors, tire installations, and wheel alignments At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Starting Pay: $19 - $22 hourly Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment Schedule: We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started Join the Carvana team by applying on this page, or call one of our recruiters by phone at (888) 508-4749, Monday through Friday, between 6 AM and 4 PM MST. Not a match for this role? We have a variety of Technician roles in our Inspection Centers, depending on your level of experience - take a look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers: • Entry-Level Auto Technician (min 6 months professional experience): perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process., • Brake and Tire Technician (min 1 year professional experience): perform light maintenance or repairs, including changing brakes and tires, • Mid-Level (Mechanical Repair / Build / General) Technician (min 3 years of professional experience): perform light to medium automotive repairs and minimal diagnostics on our vehicles, • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold) To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job DescriptionDescription: Snyder Industries, Inc., has an opening for a Tool Crib Attendant. Snyder is an industry leader with over 50 years of experience, we specialize in providing high quality components for the heavy equipment industry utilizing our updated mills, lathes, gear and heat treating/induction machinery. If you desire a team atmosphere and want to excel with our newly restructured management team, look no further! In our climate-controlled shop we offer OT instead of mandating it, making our employees and their needs a top priority to align with the realistic goals set by our customers. With our newly installed LED lighting, you will quickly see we set the bar high for both safety and cleanliness. Requirements: Job Responsibilities: • Issuing Tools to operators, • Maintaining Inventories, • Restocking tooling, • Collecting tooling from machining areas, • Ensuring a safe working area, • Maintaining Accurate Records, • Must be able to grasp conceptual items, • Must be able to stand, stoop, bend, twist, reach, and lift up to 50lbs., • Must have good communication skills, • Work/life balance with optional overtime, • Flexible schedule, • Double time pay for all hours worked over 48 in a work week, • 15% shift differential, • Medical, Dental, and Vision, • Life and LTD, • Paid Time Off, • Paid Parental Leave, • A rewarding 401(k) program, • Annual work boot allowance, • Onsite Fitness Center Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Referral program, • Retirement plan, • 8 hour shift, • Day shift Job Type: Full-time Work Location: In person

Job Description We're looking for Automotive Mechanics with a minimum of 6 months of professional automotive repair experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As an Entry-Level Post-Production Auto Technician, you'll be expected to perform light maintenance, fluid checks, and/or conduct quality inspections on our vehicles to look for any imperfections or repairs that may be needed throughout the post production process. At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Pay Range: $19 - $22 hourly Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment Schedule: We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started Join the Carvana team by applying on this page, or call one of our recruiters by phone at (888) 508-4749, Monday through Friday, between 6 AM and 4 PM MST. Not a match for this role? We have a variety of Technician roles in our Inspection Centers, depending on your level of experience - take a look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers: • Entry-Level Auto Technician (min 6 months professional experience): perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process., • Brake and Tire Technician (min 1 year professional experience): perform light maintenance or repairs, including changing brakes and tires, • Mid-Level (Mechanical Repair / Build / General) Technician (min 3 years of professional experience): perform light to medium automotive repairs and minimal diagnostics on our vehicles, • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: LOF (Lube, Oil, and Filter), Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold) To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description We're looking for Automotive Mechanics with a minimum of 6 months of professional automotive repair experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As an Entry-Level Technician, you'll be expected to perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process. At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Starting Pay: $19-$21 hourly Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment Schedule: We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started Join the Carvana team by applying on this page, or call one of our recruiters by phone at (888) 508-4749, Monday through Friday, between 6 AM and 4 PM MST. Not a match for this role? We have a variety of Technician roles in our Inspection Centers, depending on your level of experience - take a look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers: • Entry-Level Auto Technician (min 6 months professional experience): perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process., • Brake and Tire Technician (min 1 year professional experience): perform light maintenance or repairs, including changing brakes and tires, • Mid-Level (Mechanical Repair / Build / General) Technician (min 3 years of professional experience): perform light to medium automotive repairs and minimal diagnostics on our vehicles, • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold) To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description We're looking for automotive mechanics with a minimum of 3 years of professional automotive repair experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As an Experienced Auto Technician, you will perform a full range of automotive repairs—from light maintenance to heavy engine work—and diagnostics on our vehicles, including: • Performing general to complex repairs on all makes and models, ranging from timing belts and suspension systems to heavy engine work., • Diagnosing and repairing advanced vehicle electrical issues, including work on electric and hybrid vehicles. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs Schedule: We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started Join the Carvana team by applying on this page, or call one of our recruiters by phone at (888) 508-4749, Monday through Friday, between 6 AM and 4 PM MST. Not a match for this role? We have a variety of Technician roles in our Inspection Centers, depending on your level of experience - take a look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers. • Entry-Level Auto Technician (min 6 months professional experience): perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process. General qualifications and requirements • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold) To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English

Job Description We're looking for Automotive Mechanics with a minimum of 6 months of professional automotive repair experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As an Entry-Level Technician, you'll be expected to perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process. At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs Schedule: We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started Join the Carvana team by applying on this page, or call one of our recruiters by phone at (888) 508-4749, Monday through Friday, between 6 AM and 4 PM MST. Not a match for this role? We have a variety of Technician roles in our Inspection Centers, depending on your level of experience - take a look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers: • Entry-Level Auto Technician (min 6 months professional experience): perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process., • Brake and Tire Technician (min 1 year professional experience): perform light maintenance or repairs, including changing brakes and tires, • Mid-Level (Mechanical Repair / Build / General) Technician (min 3 years of professional experience): perform light to medium automotive repairs and minimal diagnostics on our vehicles, • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold) To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description Pay Range: $17-$19 hourly Plus $1 Shift Differential We're looking for Cosmetic Inspectors with a of professional automotive prepping experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As an Entry-level Cosmetic Inspector, you'll be expected to identify cosmetic imperfections and/or repairs pre-reconditioning and post-paint process. May require additional tasks such as prepping, sanding, and masking of vehicles. At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started Join the Carvana team by applying on this page, or call one of our recruiters by phone at (888) 690-7853, Monday through Friday, between 6 AM and 4 PM PT (9AM to 7PM ET). Not a match for this role? We have a variety of paint roles available, depending on your experience - look below to see other roles available to help us get our low-mileage, late-model cars ready for our customers: • Paint Prepper (min 6 months professional experience): prepare vehicles for cosmetic paintwork, including sanding, masking, taping, bagging, unbagging/tear down, and buffing, • Entry-Level Painter (min 1 year professional experience): prime vehicles and perform final sanding before the vehicle is painted, along with buffing, touch-up, paint mixing, and airbrush., • Mid-Level Painter (min 3 years professional experience): match/mix paint color and use water-based paint to paint the vehicle inside our paint booths, • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold) To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Ingersoll Rand is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Job Title: Centrifugal Assembler/Welder Location: Buffalo, NY Schedule: Monday - Friday 7:00AM - 3:30 PM Pay Range: Starting Pay will range between $27.00 - $32.00 per hour depending on qualifications and experience. This is a full-time, hourly position. About Us: Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: We are looking for a skilled Assembler with MIG and TIG welding experience to perform a variety of tasks in conjunction with the assembly of our products. This role is responsible for assembling components, performing MIG and TIG welding as required, and ensuring all parts fit correctly and meet quality specifications for the final product. The ideal candidate will safely perform high-level, continuous production work while maintaining strict adherence to quality and safety standards. Assignments may vary based on business demands. Responsibilities: • Perform assembly and testing of industrial machinery and compression equipment following standard work procedures., • Read and interpret blueprints, method sheets, diagrams, and specifications to assemble components accurately., • Operate pneumatic, power, and hand tools to complete assembly, welding, wiring, painting, and related tasks., • Inspect parts and finished products to detect quality defects and ensure compliance with safety standards., • Load and unload equipment using fork trucks and hoists; support material handling and inventory activities., • Maintain tools and equipment, initiate repair work orders as needed, and ensure proper upkeep., • Maintain a safe, clean work environment in compliance with all safety rules and procedures., • High School Diploma or General Equivalent Diploma (GED) is required., • Familiar with and ability to utilize all hand tools including wrenches, sockets, hammers, tape measures, crimpers, cutters, and steel banding., • MIG & TIG welding., • 3+ years experience welding to exact ASME specifications., • Must know proper purging techniques for stainless steels., • Knowledge of and willingness to comply with all general work rules, policies and procedures, including safety guidelines and procedures., • Able to rely on experience and judgment to plan and accomplish goals., • Ability to learn to operate all equipment associated with the job; including, but not limited to, power hand tools, forklifts, skyjacks, cranes, and measuring devices., • Ability to identify routine problem causation, and correct routine problems, and willingness to learn., • Broad working knowledge and experience with standard work instructions., • Team oriented, must have the ability to work cohesively with others., • Must possess ability to work well in a manufacturing environment., • Must be detail-oriented and self-motivated., • 3+ years in manufacturing experience preferred., • Prior experience in mechanical assembly, electrical wiring, precision measurement, blueprint reading and pipefitting is preferred., • Ability to complete X-ray quality work to ASME B31.3, • Knowledgeable of and able to utilize computer systems., • Frequently required to sit, stand, and walk for extended periods., • Reaching and handling with high levels of dexterity., • Occasionally required to work near moving mechanical equipment., • Frequent exposure to various chemicals, sealants, and lubricants., • Occasionally required to work outside where weather conditions range from moderate cold to moderate heat. What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit . What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. APPLY NOW

Job Description Overview Catholic Charities of Buffalo is seeking a full‑time Facilities Maintenance worker to support the Facilities Department. This position works in a team‑oriented environment and is responsible for routine maintenance tasks, repairs, and general upkeep of agency facilities and grounds. The Facilities Maintenance role plays a vital role in ensuring that Catholic Charities locations remain safe, clean, and functional. This role offers an excellent opportunity to learn, grow, and develop skills in facilities maintenance while supporting the agency's mission. This position is scheduled for Monday through Friday, 7:00 a.m. to 3:00 p.m. (40 hours per week), with the potential for overtime as needed by the agency. Catholic Charities is non-profit human services agency that strives to empower individuals, children, and families across the eight counties of Western New York. For more than 100 years, Catholic Charities of Buffalo has provided HOPE to individuals and families of all faiths, backgrounds, and circumstances. As the most comprehensive provider of human services in Western New York, Catholic Charities delivers wide-ranging programs to address systemic poverty, sudden financial crisis, hunger, behavioral health, workforce readiness, family stability, legal immigration and resettlement, and help for older adults. As a trauma-informed agency, we strive to support the total wellbeing of clients and employees. Catholic Charities prioritizes wellness and diversity through various committees such as: CARE (Compassion, Acceptance, Respect for Everyone) Committee to create an inclusive environment where every individual feels seen, heard, and valued; Trauma-Informed Care (TIC) Committee to lead agency efforts in creating and maintaining a trauma-informed workplace; Wellbeing Committee to empower staff to reach their full potential through personal wellness and community support; and the Safety Committee to maintain a physically and psychologically safe and welcoming environment for all. Job Responsibilities * Pick up and deliver items using company vehicles, including donations, furniture, and food items for agency pantries. * Move and transport furniture between Catholic Charities locations as requested. * Maintain building exteriors and grounds, including removal of garbage and debris. * Remove snow and ice from roadways, parking lots, ramps, and walkways. * Perform lawn and grounds care including cutting, planting, watering, and fertilizing lawns, trees, and shrubs. * Set up and break down rooms for meetings and events across the organization. * Assist with building installations, repairs, and renovations, including electrical fixtures, switches, and semi‑skilled construction tasks. * Perform routine carpentry, painting, patching, and light plumbing duties based on skill level and experience. * Operate gasoline‑powered equipment including trucks, trailers, mowers, and weeders. * Assist other maintenance‑related tasks and departments as assigned. Qualifications * High school diploma or equivalent required. * Prior experience in general maintenance, facilities, or grounds keeping preferred. * Knowledge of tools and equipment commonly used in maintenance and building repair. * Ability to work independently and as part of a team in a fast‑paced, multi‑site environment. * Ability to lift and carry a minimum of 35 pounds and perform physical labor including standing, walking, bending, kneeling, and climbing for extended periods. * Ability to work both indoors and outdoors in varying weather conditions, including snow, heat, and rain. * Valid New York State Driver's License required; must be able to safely operate agency vehicles, trailers, and powered equipment. * Basic knowledge of carpentry, plumbing, electrical, or mechanical systems a plus. * Strong time‑management skills with the ability to prioritize tasks and respond to changing maintenance needs. * Reliable, dependable, flexible, and able to communicate effectively with staff and supervisors. Why You'll Love Working Here * 40 hours per week (With the possibility of overtime) * 13 paid holidays * 25 PTO days per year (pro‑rated first year) * Comprehensive health, dental & vision coverage for full‑time employees * Employer‑paid life insurance (full‑time) * Ancillary benefit offerings * Flexible Spending Account (FSA) option * Health Savings Account (HSA) option with HDHP enrollment * Employer‑paid Employee Assistance Program (EAP) * 403(b) Retirement Plan (eligible after first pay period) with employer contribution after six months Applicants must reside in New York State to be considered. Compensation range may vary based on factors including but not limited to skills, education, location and experience. Apply today at: As an Equal Opportunity Employer, Catholic Charities of Buffalo is committed to providing equal employment opportunities to all individuals, regardless of race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. Catholic Charities of Buffalo will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities, unless such accommodations would impose an undue hardship on the operation of the business. If you require reasonable accommodation during the application or interview process, please contact . Job Posted by ApplicantPro

Job DescriptionDescription: POSITION SUMMARY • Prepares all required items for service., • Sets up service units with needed items., • Serves items in accordance with established portions and presentation standards., • Notifies Sous Chef of expected shortages., • Ensures that assigned work areas and equipment are clean and sanitary., • Assists the Sous Chef in maintaining security and safety in the kitchen., • Maintains neat professional appearance and observes personal cleanliness rules at all times., • Sets up, maintains and breaks down station., • Requisitions items needed to produce menu items., • Adheres to state and local health and safety regulations., • Covers, dates and neatly stores all prepped products for service., • Maintains the highest sanitary standards., • Assists with other duties as assigned by Sous Chef. Requirements: POSITION QUALIFICATIONS Competency Statement(s) • Analytical Skills - Ability to use thinking and reasoning to solve a problem., • Communication, Written - Ability to communicate in writing clearly and concisely., • Detail Oriented - Ability to pay attention to the minute details of a project or task., • Goal Oriented - Ability to focus on a goal and obtain a pre-determined result. Competency Statement(s) • Responsible - Ability to be held accountable or answerable for one’s conduct., • Physical Abilities Lift /Carry, • Stand C (Constantly) 10 lbs. or less F (Frequently), • Walk C (Constantly) 11-20 lbs. F (Frequently), • Sit O (Occasionally) 21-50 lbs. F (Frequently), • Handling / Fingering C (Constantly) 51-100 lbs. O (Occasionally), • Reach Outward F (Frequently) Over 100 lbs. N (Not Applicable), • Reach Above Shoulder F (Frequently), • Climb F (Frequently), • Crawl N (Not Applicable), • Squat or Kneel F (Frequently), • Bend F (Frequently), • Push / Pull, • 12 lbs. or less F (Frequently), • 13-25 lbs. F (Frequently), • 26-40 lbs. F (Frequently) O (Occasionally) Occupation requires this activity up to 33% of the time (0 - 2.5+ hrs/day) F (Frequently) Occupation requires this activity from 33% - 66% of the time (2.5 - 5.5+ hrs/day) C (Constantly) Occupation requires this activity more than 66% of the time (5.5+ hrs/day) Other Physical Requirements • Vision (Near, Distance, Peripheral, Depth Perception), • Sense of Sound (Hear other people talking), • Sense of Smell The work environment characteristics described here are representative of those an employee may encounter while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to wet and/or humid conditions; moving mechanical parts, extreme cold (non weather) and extreme heat (non weather and weather related)

Job Description Location: Buffalo, NY Job Title: HVAC Install Technician Our company is looking for an experienced HVAC Installation Technician to join our growing team! People often come to us looking for a job, but they stay with us because they find a fulfilling career, room to grow, and opportunities to excel. Responsibilities and Expectations You will install residential heating and cooling systems, ensuring all installations meet high quality, safety, and code standards while delivering an excellent customer experience. Key Tasks • Install residential HVAC systems including furnaces, air conditioners, heat pumps, and mini-splits., • Replace old or inefficient systems with new energy-efficient models., • Fabricate, assemble, and install ductwork and piping as required., • Test and verify system performance, airflow, and calibration., • Review completed installations with homeowners and provide system operation instructions., • Maintain compliance with building codes, manufacturer specifications, and safety standards., • Collaborate with team members to ensure timely completion of projects., • Maintain organized tools, materials, and company vehicles. Requirements • Experience in residential HVAC installation with a minimum of 2–5+ years required., • Strong mechanical and electrical aptitude., • Ability to read and interpret blueprints and wiring diagrams., • Attention to detail and commitment to quality workmanship., • EPA Section 608 Certification., • Valid driver's license and clean driving record., • Experience utilizing Service Titan highly preferred. What Can We Do for You? • Competitive pay – Ranging from $20-$40/hr. with opportunities for commission based on experience and performance., • Benefits – we offer medical insurance with employer contribution, dental insurance, vision insurance, life insurance, short-term disability, and other additional supplemental insurances., • Earned Time Off., • Paid Holidays., • 401k Plan with company match, • On-the-job training., • Company supplied vehicle., • New company supplied iPad & access to integrated software., • State of the art parts and supplies. The compensation for this position is expected to range between $20.00 - $40.00 per hour. This range is a good-faith estimate, based on the qualifications necessary for the position, including experience, training, and other considerations permitted by law. Factors that may be used when making an offer may include a candidate's skills, experience, the expected quality and quantity of work, and internal pay alignment, as needed. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity or any other characteristic protected by law. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments.

Job Description Location: Buffalo, NY Job Title: HVAC Service & Maintenance Technician Our company is looking for an experienced HVAC Service & Maintenance Technician to join our growing team! People often come to us looking for a job, but they stay with us because they find a fulfilling career, room to grow, and opportunities to excel. Responsibilities and Expectations You will diagnose, repair, and maintain residential heating and cooling systems while ensuring our customers' homes remain comfortable and energy efficient. Key Tasks • Inspect, diagnose, and repair residential HVAC systems including furnaces, air conditioners, heat pumps, and thermostats., • Perform scheduled maintenance, tune-ups, and system performance checks., • Identify and communicate repair and replacement options to homeowners., • Respond to service calls promptly, providing courteous and efficient solutions., • Accurately document all service activities and customer interactions., • Educate homeowners on proper system care and energy efficiency practices., • Maintain company tools, vehicles, and equipment in clean and safe condition., • Adhere to all company, safety, and industry standards. Requirements • Prior Residential and Commercial HVAC experience with a minimum of 2 years residential., • Experience utilizing Service Titan highly preferred., • Effective communication and customer service skills., • Strong diagnostic and problem-solving abilities., • Ability to work independently and as part of a team., • Attention to detail and organizational skills., • EPA Section 608 Certification (if applicable)., • Valid driver's license with a clean driving record. What Can We Do for You? • Competitive pay – Ranging from $25-$35/hr. with opportunities for uncapped commission based on experience and performance., • Benefits – we offer medical insurance with employer contribution, dental insurance, vision insurance, life insurance, short-term disability, and other additional supplemental insurances., • Earned Time Off., • Paid Holidays., • 401k Plan with Company Match., • On-the-job training., • Company supplied vehicle., • New company supplied iPad & access to integrated software., • State of the art parts and supplies. The compensation for this position is expected to range between $25.00 - $35.00 per hour. This range is a good-faith estimate, based on the qualifications necessary for the position, including experience, training, and other considerations permitted by law. Factors that may be used when making an offer may include a candidate's skills, experience, the expected quality and quantity of work, and internal pay alignment, as needed. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity or any other characteristic protected by law. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments.

Job Description API Heat Transfer is looking for people who enjoy being part of transformation. We have a new mission, new leaders, and are accelerating our path to Lean Cultural Change. Our Operations Team is on the way to becoming a Lean Management powerhouse! If you like to fix things, and want to be part of a new API, we'd love to talk to you about our DFT Burner A/Grinder - 2nd shift position! At API we take our culture transformation seriously! To help find the best fit for our positions and organization, we ask that you complete our 10 minute Culture Index Survey. Simply follow the link after submitting your application to help us use our interview time to dive deeper into your job behaviors and work history. What We Offer You: • Starting wage $27.78/hour, incremental increases move to $30.12 after one year, • Be part of leading-edge technology for the heat transfer industry, • Career development and advancement, • Multi-site, global operations to learn!, • Ability to impact customers across multiple industries, • Only 20 minutes from the beautiful Buffalo waterfront and 45 minutes from Niagara Falls, • In house market style cafeteria with plenty of healthy selections, • Performs burning, punching and grind/cleaning operations to prepare shell pipe, cradles, nozzle or dome assemblies for final weld set-up or assembly. Use drawings and routing sheets to perform the following:, • Use Plasma Cutter, Oxy-fuel torch, hand plasma, or Iron worker to burn/punch/bevel nozzle, coupling, drain or mounting holes in shell pipe/tubing or other structural plate and bar., • Use computer to download and store drawings to program the Fixed Plasma Cutter., • Use plasma machine to burn elliptical shapes on dome and nozzle assembly ends to conform to shell diagram., • Use appropriate hand grinding tools to remove burning slag, rust, scale, or punching burrs to assembly or final weld set-up., • Use mechanical lifting equipment., • GED or High School diploma, • Read and work off of blue prints, • Good verbal and written communication skills, • 1-5 years experience in a manufacturing environment, • Detail orientated, • Ability to lift and carry heavy items, • Stand and walk for extended periods

Job Description We are seeking an experienced Journeyman HVAC R Technician to support commercial and industrial service operations in the Indiana market. This role is focused on maintaining and servicing complex mechanical systems across environments such as data centers, healthcare facilities, advanced manufacturing, and large commercial buildings. The Journeyman HVAC Technician will be responsible for diagnosing, repairing, and maintaining critical HVAC and mechanical systems to ensure reliability, efficiency, and uptime in high-performance environments. What We’re Looking For • Strong commitment to safety, quality, and compliance in regulated environments, • Excellent communication and teamwork skills, • High level of reliability and professionalism in client-facing situations, • Strong troubleshooting and problem-solving abilities, • Diagnose, service, and repair commercial and industrial HVAC systems without supervision, • Perform preventative maintenance and system inspections on critical equipment, • Service equipment including:, • Large RTUs and package units (50+ tons), • Boilers, heat exchangers, and hydronic systems, • Chillers and chilled water systems, • Control valves, actuators, and mechanical components, • Troubleshoot electrical, mechanical, and building automation/control systems, • Support system uptime in mission-critical environments such as data centers and healthcare facilities, • Read and interpret blueprints, schematics, and technical documentation, • Ensure all work is completed in compliance with local codes, safety standards, and client requirements, • Communicate effectively with customers, project teams, and internal leadership, • 5+ years of commercial or industrial HVAC service experience, • EPA Certification required, • Strong experience with complex mechanical systems and controls, • Ability to independently diagnose issues and execute repairs in the field, • Experience working in mission-critical environments (data centers, semiconductor, healthcare), • Familiarity with building automation systems and controls, • Experience with chiller maintenance, retrofits, or large-scale mechanical systems, • Background supporting high-tech or regulated facilities

Job Description MISSION STATEMENT Are you ready to give back to the community while pursuing your passion? For over 50 years, Acacia Network and its affiliates have been committed to improving the quality-of-life and wellbeing of underserved communities in New York City and beyond. We are one of the leading human services organizations in New York City and the largest Hispanic-led nonprofit in the State, serving over 150,000 individuals every year. Our programs serve individuals at every age and developmental level, from the very young through our daycare programs to mature adults through our older adults centers. Our extensive array of community-based services are fully integrated, bilingual and culturally competent. POSITION OVERVIEW The maintenance worker is responsible for the general maintenance of the facilities which include but are not limited to repairs on heating and air conditioning equipment, hardware repairs, repairing light fixtures, plumbing repairs, moving equipment/furniture, painting and plastering walls, driving company vehicles and general carpentry needs of the facilities. A basic familiarity with the facilities mechanical plant is required. KEY ESSENTIAL FUNCTIONS • Maintain the physical plant and facility in a safe and secure manner., • Assure that the building has adequate heat or air conditioning, light, water and sewage disposal at all times; be on duty during interruptions of any of these to coordinate repairs and emergency contingency plans., • Inspect, diagnose and repair physical plant problems as assigned., • Maintains inventory of all departmental tools; issues and records the distribution and return of all tools used for daily., • Adhere to Fire Safety / Emergency Regulations, Resident Rights and interests, general and special policies and procedures of the Facility., • Perform services as designed at the Facility Manager; maintains grounds and properties owned and/or operated by the organization in compliance with all applicable codes, rules and regulations., • Ensure that all garbage and trash, including hazardous materials, are disposed of properly., • Perform in a wide range of trades including but not limited to maintenance, test, repair, installation and replacement of parts and equipment involving general skills in carpentry, plumbing, masonry, electricity, HVAC, refrigeration, sanitation, grounds, painting, wall covering, cleaning transportation and the preventative maintenance program., • Maintain a clean, neat appearance wearing prescribed uniform at all times., • Cleans all dust, dirt and debris accumulated as a result of maintenance performed, equipment malfunction and resulting repair, construction or renovation., • High School diploma preferred., • 3-5 yrs Maintenance Worker experience required., • Current Boiler Operator Certificate., • Ability to communicate effectively orally and in writing., • Highly organized, motivated self-starter. Excellent time management skills., • Ability to organize and maintain detailed records; complete necessary paperwork and meet deadlines. Acacia Network provides a comprehensive and competitive benefits package to our employees. In addition to a competitive salary, our benefits include medical, dental, and vision coverage. We also offer generous paid time off, including vacation days and paid holidays, to support a healthy work-life balance. We prioritize the well-being of our employees both professionally and personally. As an Equal Opportunity Employer, we encourage individuals from all backgrounds to apply.

Job DescriptionDescription: Towne Housing Real Estate is actively seeking energetic, skilled, and customer-focused Apartment Maintenance Technicians to join our growing team! If you have experience in property maintenance, facilities management, building systems, and routine residential repairs, we want to hear from you. We are a multi-site property management company operating over 1,000+ rental units across Western New York, Greater Rochester, and Southtowns areas. Join a dynamic team where your expertise in maintenance and repair will make a real difference to our residents’ quality of life. The ideal candidate has a strong understanding of property systems such as basic plumbing, electrical, HVAC, and carpentry for all rental properties. Strong understanding of HVAC systems, parts, customer service are all highly required in this role. We manage a portfolio of over 1,000+ apartments in the Western New York and Springville, NY Area’s. Our team members are our most important asset to our operation and field technicians work daily to provide a great customer experience with the help and support of our in-house maintenance coordinating team. We offer competitive industry pay and employee benefits based on applicant experience with opportunities for training and future advancement over time following demonstration of expected tasks and job responsibilities. While working at Towne you are assisted by our maintenance coordinators in the office to manage your daily schedules, limit confusions while on jobs, allow for easy unit access and to assist in tenant communications. Schedules and jobs are Phone APP based and accessible on any smartphone. Schedules are posted well in advance to easily outline what tasks are being assigned. Benefits Include: • 1 Weeks Paid Vacation/PTO, • 1 Weeks Paid Sick Leave, • 3 Paid Holidays (Your Choice), • Health Insurance - Medical, Dental, Vision, Life, • 401(k) Retirement Plan & Profit Sharing Requirements: Tasks & Responsibilities: • Emergency calls such as no heat, no air conditioning when applicable and any related Furnace or Boiler needs., • Fix HVAC systems including both furnaces and boiler systems aging between 1 year – 2+ years., • Make necessary material runs as needed on a job-by-job basis, • Be okay to travel to multiple job sites regularly, • Have good note-taking skills, communication skills, organized, and works efficiently, • Have strong customer service techniques., • Have a positive and upbeat attitude and a willingness to help co-workers and residents in need., • To maintain a cleanly shaven, professional appearance for our residents and to maintain all required uniform standards on all service calls., • To organize, keep clean, keep stock and track on truck inventory when and where applicable., • Use, Keep Operable and always implement all necessary safety equipment and practices., • Driver's License (Required), • Work Location: On the road

Job DescriptionJob Description: Isaac Heating & Air Conditioning is currently in search of a Residential HVAC Installer to join their Buffalo, NY team. The ideal candidate for this position possesses a strong willingness to learn and grow, with a genuine desire to continue learning the skills necessary to become a proficient and highly effective Residential Installer. Summary: For over 75 years, Isaac Heating and Air Conditioning has worked diligently to meet the changing heating and air conditioning needs of homeowners and businesses in Upstate and Central New York. Isaac is one of the nation's largest privately held HVAC/R contractors and services over 35,000 clients a year. Creating an enjoyable experience met with anticipation results in an environment where our team, clients, and community can comfortably grow, prosper, succeed, and improve their quality of life. Isaac partners with leading HVAC and plumbing companies throughout the United States, providing the support and resources of a large national company. Responsibilities: • Perform installations of furnaces, boilers, heat pumps, fireplaces, AC units etc. for residential clients, • Interact with homeowners to educate, build relationships, and address HVAC concerns, • Ensure the HVAC equipment that was installed is clean and safe upon departure, • Safely operate hand tools, power tools, generators, and other equipment as required by the job, • High School diploma or equivalent required, • 2-5 years of HVAC experience preferred, • OSHA 10-hour Certificate and/or EPA Universal Certification preferred, • Excellent written, verbal, and active listening skills, • Exceptional customer service skills, • Technical knowledge, • Strong organizational skills, • Ability to work individually and as part of a team, • Customer focused, • Competitive base pay, • Comprehensive Medical, Dental, and Vision Insurance, • 401k Retirement Plan with Company Match, • Paid Vacation and Sick Time, • Annual Tool and Uniform Allowances The starting base range for this position is $25.00 to $30.00/hour. This is the range of the base pay only, it does not include other components that make up the total compensation package of the position. If offered a position, your total compensation package will be determined by experience, location, skills, and/or education which may result in a total compensation package that falls outside of the provided range. This employer participates in E-Verify to verify the employment eligibility of all new hires. E-Verify is a federal program that compares information from Form I-9 to government records to confirm employment eligibility. Isaac Heating & Air Conditioning (subsidiaries and affiliates) is an Equal Opportunity Employer committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to sex, race, color, age, national origin, religion, physical and mental disability, genetic information, marital status, sexual orientation, gender identity/assignment, citizenship, pregnancy, or maternity, protected veteran status, or any other status prohibited by applicable national, federal, state or location

Ingersoll Rand is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Job Title: Centrifugal Assembler/Welder Location: Buffalo, NY Schedule: Monday - Friday 7:00AM - 3:30 PM Pay Range: Starting Pay will range between $27.00 - $32.00 per hour depending on qualifications and experience. This is a full-time, hourly position. About Us: Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: We are looking for a skilled Assembler with MIG and TIG welding experience to perform a variety of tasks in conjunction with the assembly of our products. This role is responsible for assembling components, performing MIG and TIG welding as required, and ensuring all parts fit correctly and meet quality specifications for the final product. The ideal candidate will safely perform high-level, continuous production work while maintaining strict adherence to quality and safety standards. Assignments may vary based on business demands. Responsibilities: • Perform assembly and testing of industrial machinery and compression equipment following standard work procedures., • Read and interpret blueprints, method sheets, diagrams, and specifications to assemble components accurately., • Operate pneumatic, power, and hand tools to complete assembly, welding, wiring, painting, and related tasks., • Inspect parts and finished products to detect quality defects and ensure compliance with safety standards., • Load and unload equipment using fork trucks and hoists; support material handling and inventory activities., • Maintain tools and equipment, initiate repair work orders as needed, and ensure proper upkeep., • Maintain a safe, clean work environment in compliance with all safety rules and procedures., • Collaborate with team members, support cross-functional tasks, and contribute to process improvement initiatives. Requirements: • High School Diploma or General Equivalent Diploma (GED) is required., • Familiar with and ability to utilize all hand tools including wrenches, sockets, hammers, tape measures, crimpers, cutters, and steel banding., • MIG & TIG welding., • 3+ years experience welding to exact ASME specifications., • Must know proper purging techniques for stainless steels., • Must be able to lift up to 25 pounds from floor to waist. Occasionally required to lift up to 50 pounds. Core Competences: • Knowledge of and willingness to comply with all general work rules, policies and procedures, including safety guidelines and procedures., • Able to rely on experience and judgment to plan and accomplish goals., • Ability to learn to operate all equipment associated with the job; including, but not limited to, power hand tools, forklifts, skyjacks, cranes, and measuring devices., • Ability to identify routine problem causation, and correct routine problems, and willingness to learn., • Broad working knowledge and experience with standard work instructions., • Team oriented, must have the ability to work cohesively with others., • Must possess ability to work well in a manufacturing environment., • Must be detail-oriented and self-motivated., • Must be able to work in a multi-tasked environment. Preferences: • 3+ years in manufacturing experience preferred., • Prior experience in mechanical assembly, electrical wiring, precision measurement, blueprint reading and pipefitting is preferred., • Ability to complete X-ray quality work to ASME B31.3, • Knowledgeable of and able to utilize computer systems., • Frequently required to sit, stand, and walk for extended periods., • Reaching and handling with high levels of dexterity., • Occasionally required to work near moving mechanical equipment., • Frequent exposure to various chemicals, sealants, and lubricants., • Occasionally required to work outside where weather conditions range from moderate cold to moderate heat., • Normal exposure to moderate noise levels. Occasional exposure to high noise, levels where hearing protection will be required. Pay Range: Starting Pay will range between $27.00 - $32.00 per hour depending on qualifications and experience. This is a full-time, hourly position. What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit . APPLY NOW

About the Job COMPANY: Skyway Auto Parts Inc. JOB TITLE: Vehicle Processor REPORTS TO: Facility Manager and Facility Supervisor. JOB TYPE: Full-time, Non-Exempt. LOCATION: Skyway Auto Parts (637 Tifft Street Buffalo, NY 14220). HOURS: 40 Hour Work Week. COMPENSATION: $18-21/hr, based on experience & skills. PURPOSE: The purpose of the vehicle processor is to safely and efficiently prepare vehicles to be placed in the yard for customers to pull parts from and prepare end of life vehicles to be sent to the shredder. RESPONSIBILITIES: • Clean and prepare the job site and yard in a tidy and safe manner., • Prepare vehicle for dismantling, removes and properly disposes of fluids such as gas or oil from vehicles, disconnect battery, airbags, and any other electrical components., • Remove tires from vehicles., • Removes and properly handles catalytic converters., • Maintains tools and equipment and regularly inspects for discrepancies., • Adhere to safety regulations, environmental regulations, and company policies while performing job duties., • Wearing personal protective equipment (PPE)., • Use a variety of tools and machines: blowtorches, forklifts, lifts, power drills, grinders, saws, pressure washers, and water spraying equipment., • Other tasks/duties as assigned by management. QUALIFICATIONS:, • High School degree or equivalent preferred., • Being able to operate bobcats, forklifts, and loaders is a plus., • Ability to lift 50 lbs. and stand for long periods of time., • Quick learner who can follow directions., • Good communication skills., • Team player., • Organized, consistent, and good at multitasking. PHYSICAL DEMANDS & WORK ENVIRONMENT: The physical demands described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Reasonable accommodations may be made to enable qualified individuals with disabilities to perform essential functions., • Must be able to remain in and operate equipment in a shop or dismantling area., • Work in an area equipped with drain tables, forklifts, chain hoists, and other tools as needed., • Move about a salvage yard, • Ability to use both hands regularly with enough dexterity to safely operate basic hand and power tools., • Ability to lift, move, push, and carry objects and materials up to 50lbs. with or without assistance., • At times outside work in the yard is where temperature and weather extremes (heat, cold, rain) may be encountered., • Expected work hours are based on role and location., • Ability to work occasional overtime as needed as determined by the employee's supervisor. BENEFITS:, • Medical & Dental (70% employer paid)., • Flexible Spending Account (Out of pocket)., • Vision Insurance (Out of pocket)., • 401(k) (with 2.5% company match)., • Aflac Services (Out of pocket)., • Life Insurance (25k, 100% employer paid)., • 8.5 Paid Holidays., • Employee Referral $1000., • Safety Toe Boot and Safety Glasses Reimbursement Annually., • Paid Vacation., • Paid Sick Time. Metalico is an Equal Employment Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to that individual's race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender identity, age, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. About the Company Metalico is a leading full-service, broadly diversified scrap metal recycler, principally operating in the Northeastern United States. Our scrap operations source, buy, process, and sell four distinct groups of commodity metals for use in the manufacture of new products:We recycle scrap steel and iron, which is sold primarily to domestic mills and foundries.We recycle non-ferrous metals, principally aluminum, copper, lead, and nickel-based steel and high temperature alloys.These products are sold to domestic manufacturers and, to a lesser extent, to the export markets. Metalico today employs 600 people in 27 operating locations across 6 states. Metalico is headquartered in Cranford, New Jersey.

This Operator will use multi-head embroidery machines, each having individual procedures that must be followed. The Embroidery Machine Operator plays a vital role in the ongoing production functions of the Company. The Heat Press Machine Operator is primarily in a warehouse environment and may be ex

The Imagine Group is recruiting for a.The organization operates advanced production facilities that manufacture strips, sheet, and other semi-finished metal products used in electrical components, heat exchangers, and industrial applications.Known for its focus on innovation and sustainable manufact

The Embroidery Machine Operator plays a vital role in the ongoing production functions of the Company. The Heat Press Machine Operator is primarily in a warehouse environment and may be exposed to varying weather and temperature conditions. The Embroidery Machine Operator is responsible for producin

Job Description API Heat Transfer is looking for people who enjoy being part of transformation. We have a new mission, new leaders, and are accelerating our path to Lean Cultural Change. Our Operations Team is on the way to becoming a Lean Management powerhouse! If you like to fix things, and want to be part of a new API, we'd love to talk to you about our 2nd shift Fab S/U Welder position! At API we take our culture transformation seriously! To help find the best fit for our positions and organization, we ask that you complete our 10-minute Culture Index Survey. Simply follow the link after submitting your application to help us use our interview time to dive deeper into your job behaviors and work history. What We Offer You: • Starting wage $30.45/hour, incremental increases move to $32.67/hour after one year, plus shift differential of $1.50, • Be part of leading-edge technology for the heat transfer industry, • Career development and advancement, • Multi-site, global operations to learn!, • Ability to impact customers across multiple industries, • Only 20 minutes from the beautiful Buffalo waterfront and 45 minutes from Niagara Falls, • In house market style cafeteria with plenty of healthy selections • Check out material allocated for fabricating assignment with specifications given on Bill of Material or drawings., • Performs all necessary set-up operations preparatory to layout, cutting or beveling and also for welding when related to his job assignment., • Performs all layout operations relevant to his fabricating assignment, using such tools as may be necessary or required., • Performs all necessary burning, cutting and beveling operations necessary to establish the correctness of length, bevel, and size of hole as relating to his job assignment. Does own chipping and removal of slag from burning or beveling operations., • Uses proper tools, fixtures or other devices as may be necessary to set up and align such fittings as are necessary to set up and align from drawings within required specifications and tolerances., • Must be able to set up and operate coupling welder and tubesheet welder in the DFT line., • May be asked to assist lower grades., • Has necessary layout tools., • Exercises reasonable care and protection for all machines surfaces when welding or handling., • Checks out correctness of overall set-up (with inspector, if necessary)., • Notifies foreman of any questionable material that is allocated to a job he is assigned to, which appears to be defective and should not be used. Must remove work from rolls or positioner when completed., • Must be able to qualify for necessary ASME Section VIII & IX Code Welding requirements, using Metallic Arc, TIG (Heli-Arc) and Mig. What You Will Bring: • Must be able to pass a written competency skills test at time of interview., • Candidate will be required to pass a series of weld tests in order to be hired., • Must be able to qualify for necessary ASME Section VIII & IX Code Welding requirements, using Metallic Arc, Heli-Arc (TIG) and MIG., • Must be code qualified on shop welding procedures for carbon steel, stainless steel to carbon steel, stainless steel to stainless steel to include PED directive or other mandated customer welder qualification requirements for the listed metals., • Must be able to demonstrate consistent quality in both weld and fit up., • Productivity levels must be maintained to meet or exceed reasonable time estimates on a consistent basis., • Assessments to be evaluated by both department supervisor and Quality Control personnel on a periodic basis., • Cube Cooling for Frac Truck, • Turnkey Solutions for Nonalcoholic Beer & Wine

Job DescriptionDescription: The Manufacturing Deburr Leadman is a skilled deburr technician that can lead a team of deburr employees on quality and packaging of all CNC manufactured product at Snyder Industries. Oversees the shipping/receiving department to ensure correct product is shipping to meet on time delivery targets. Works with internal sales team to prioritize product flow through final inspection. Works with internal quality team on non-conformances found at final inspection. Uses blueprints, ship lists, and computer MRP software to meet customer requirements. Requirements:Essential Duties and Responsibilities The essential functions include, but are not limited to the following: · Blueprint reading, GD&T, Excel, ERP systems. · Understand manufacturing processes: Turning, Milling, Gear cutting, and Heat treating. · Works with Quality Manager on non-conformances found in department · Oversees final tapping operations · Prioritizes product for deburr employees with help with Sales department · Reviews final inspection checklists and visual inspections before packaging products · Performs visual inspection in accordance with customer specifications and ISO 9001:2015 requirements · Utilizes the ship list and working with production analyst to meet delivery needs · Performs diversified deburring and final inspection duties · Operates tools and equipment such as hand grinder, Bridgeport mill, polishing station, and tap tables · Works with engineering team on gauge needs, fixturing, tooling. · Works with quality department with calibration needs · Manages organization of inspection area and raw material warehouse · Complies with safety regulations in all aspects of performing job responsibilities. · Operates computer and enters inspection data · Other Misc. Deburr/Inspection functions Minimum Qualifications (Knowledge, Skills, and Abilities) · Experience and interest in a CNC machining job shop environment · Strong written and verbal communication skills · Attentive to detail; organized · Ability to supervise/lead team · Ability to take initiative, to maintain confidentiality, to meet deadlines, and to work in a team environment · Recommend: MS Office Suite (Outlook, Word, Excel, PowerPoint) · Recommend: Understanding of raw materials: castings, forgings, bar stock, plate materials · Recommend: Understanding of CNC turning, CNC milling, Heat treat (carburization, quench & tempering, induction hardening, welding), and gear cutting (Shaping & Hobbing) · Recommend: CNC Machining background Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. This position operates on the manufacturing floor. Employee will be responsible for looking at all angles of parts in the machine and on pallets. This role routinely uses standard office equipment such as computers, phones, cameras, copiers, and filing cabinets. While performing the duties of this job, the employee is regularly required to stand; walk; use hands; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear. The employee is occasionally required to sit. The employee must lift up to fifty (50) lbs. occasionally. Note This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an “at will” relationship.

Product & Engineering Development Support development and refinement of: Modular distillation systems, Separation and heat transfer solutions, Revamp and optimization methodologies. Team Leadership & Capability Building Lead and mentor a team of Process engineers and Design engineers. Process engi

Job DescriptionDescription: POSITION SUMMARY • Washes all wares in dishwashing machine or by hand according to the highest sanitation standards., • Collects trash from kitchen areas; empties garbage cans and washes and re-lines with new bags., • Breaks down boxes, crates and removes debris., • Examines garbage for misplaced silverware, dishes, glassware and other reusable items, • Washes all stainless steel in the kitchen including shelves, dish cabinets, ice machines, coffee area, refrigerators, walk-ins, etc., • Washes and cleans receiving, trash and other kitchen-related areas, • Sweeps and mops kitchen floors., • Stores all dishes and other wares in proper areas., • Cleans dish machine and dish area after each meal period., • Performs other tasks such as assisting in food preparation, storing foods after delivery and cleaning coolers, freezers and storerooms., • Maintains inventories of soap, chemicals and paper towels., • Transfer supplies and equipment between storage and work areas., • Handles all china and glassware carefully to minimize breakage., • Continuously inspects floors in kitchen areas to assure they remain clean, clear of debris and dry., • Assists in completing weekly kitchen cleaning and maintenance list., • Cleans and safely stores all brooms, mops and other cleaning equipment in their proper places. Requirements: POSITION QUALIFICATIONS Competency Statement(s) • Energetic - Ability to work at a sustained pace and produce quality work., • Enthusiastic - Ability to bring energy to the performance of a task., • Friendly - Ability to exhibit a cheerful demeanor toward others., • Loyal - The trait of feeling a duty to the employer., • Reliability - The trait of being dependable and trustworthy., • Self Motivated - Ability to be internally inspired to perform a task to the best of ones ability using his or her own drive or initiative., • Physical Abilities Lift /Carry, • Stand C (Constantly) 10 lbs. or less F (Frequently), • Walk C (Constantly) 11-20 lbs. F (Frequently), • Sit O (Occasionally) 21-50 lbs. F (Frequently), • Handling / Fingering C (Constantly) 51-100 lbs. F (Frequently), • Reach Outward C (Constantly) Over 100 lbs. O (Occasionally), • Reach Above Shoulder C (Constantly), • Climb O (Occasionally), • Crawl N (Not Applicable), • Squat or Kneel F (Frequently), • Bend F (Frequently), • Push / Pull, • 12 lbs. or less F (Frequently), • 13-25 lbs. F (Frequently), • 26-40 lbs. F (Frequently) O (Occasionally) Occupation requires this activity up to 33% of the time (0 - 2.5+ hrs/day) F (Frequently) Occupation requires this activity from 33% - 66% of the time (2.5 - 5.5+ hrs/day) C (Constantly) Occupation requires this activity more than 66% of the time (5.5+ hrs/day) WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee may encounter while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to work near moving mechanical parts, toxic or caustic chemicals, extreme cold (non weather) and extreme heat (non weather and weather related)

We are searching for friendly and energetic full-time Front of House (FOH) Team Members to join our Tim Hortons team at 6125 Main St in Williamsville, NY on morning shift (7am-3pm) including a weekend day. As a team member, your top priority is guest satisfaction. Whether you are the very first person our guests encounter, or you are producing quality food items that our guests have come to enjoy and love you will have the opportunity to deliver and create exceptional guest experiences. Your energy and passion for guest service are what make you a top team member in this fast-paced environment, while your ability to multi-task and communicate with your fellow team members will contribute to your success. In this position, delivering outstanding customer service will be your main objective. Additional responsibilities include processing food orders, cleaning public spaces, and preparing food and beverage orders. The ideal candidate will be friendly, with excellent communication and interpersonal skills. Job Description Hospitality & Customer Service: Create a positive first impression by maintaining a clean and inviting dining room, parking lot, and wearing proper attire. Ensure coffee and products are always fresh and accurate by following our REV procedures. Deliver exceptional customer service through a friendly attitude, attentive behavior, and in-depth product knowledge. Enhance the customer and employee experience by following the S.E.T. Principles: Smile, Eye Contact, Thank You. Use proper procedures to ensure accurate orders, such as repeating the customer's order and verifying what products are being delivered to each customer. Greet customers promptly and warmly within 5 seconds at the front counter and drive-thru. Maintain speed of service targets by working efficiently and meeting customers' needs. Restaurant Operations: Adhere to all operational standards and guidelines for product preparation. Prepare all products accurately by following the order monitor. Communicate showcase and product needs to ensure availability for customers. Regularly monitor and record temperatures of required products. Keep the front counter and drive-thru area clean, organized, stocked, and ready for rush periods. Policies & Procedures: Follow all restaurant policies, procedures, and standards. Practice proper hand washing techniques and adhere to sanitation guidelines. Complete all sanitation tasks as outlined. Health & Safety: Work in compliance with occupational health and safety legislation. Follow safe work practices and procedures. Use required personal protective equipment. Report any injuries, accidents, unsafe conditions, or contraventions of health and safety regulations promptly to the Restaurant Manager or Human Resources. Operate equipment and machinery safely to ensure the well-being of everyone. Qualifications: Excellent customer service skills with a friendly and welcoming attitude. Ability to work in a fast-paced environment with a sense of urgency. Strong communication and interpersonal skills. Ability to work on a team and with multiple employees. Attention to detail and ability to accurately process orders. Willingness to assist with training new employees. Physical Demands and Working Environment: The conditions herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions. Environment: Work is performed in a busy quick food service restaurant, where employees are communicating frequently with customers and other employees. Employees in this role must be able to prepare a variety of food and beverage items and work with/train other employees. There are frequent interruptions, tasks, and position changes. Physical: Primary functions require sufficient physical ability and mobility to work in a restaurant setting with multiple employees and customers; to stand for prolonged periods of time; to stoop, bend, kneel, crouch, reach, and twist; to lift, carry, push, and/or pull light to moderate amounts of weight from <5 50 lbs.; to operate cash register system requiring repetitive hand movement and fine coordination including use of electronic devices; occasional exposure to cold/freezing below temperatures and high heat temperatures, and to verbally communicate to exchange information. Vision: See in the normal visual range with or without correction. Hearing: Hear in the normal audio range with or without correction. Ability to use and wear a headset for long period of time to take and process customer orders. Other: Regular and predictable attendance is an essential function of this job. This job description in no way states or implies that these are the only duties to be performed by this employee. The company maintains the right to add or change these duties of this position at any time. NOTE: By applying for this position, you acknowledge and understand the above job description. This job description in no way states or implies that these are the only duties to be performed by an employee in this role. It is not exhaustive and may be subject to change. The company reserves the right to assign additional duties and responsibilities as needed. Clark Holdings Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.