Heat jobs in San Diego, California - Page 3Create job alerts

Summary You will serve as a RIGGER in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: if you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help \n • You will direct the operation of cranes and similar equipment and direct laborers and helpers.\n, • You will fabricate, install, and repair standing and running rigging and wire cable or fiber rope articles, such as slings, towing bridles, nets, rope ladders, and other ship and boat rigging and weight handling gear.\n, • You will assist in ship docking operations by laying out and handling lines and tackle, snubbing lines on cleats or bollards, hauling on lines with capstans, and performing similar duties.\n, • You will install beam clamps, gin poles, gallows frames, and other supporting structures; and use jacks, pulley blocks, chain falls, rollers, and similar equipment as necessary to move and position heavy items.\n, • You will perform and direct the placement, removal, or re-positioning of machinery, structural members of ships or buildings, heavy equipment, or other loads.\n, • You will estimate the size, weight, equipment capacity, and plans for clearance and safety factors.\n, • You will guide and direct apprentices and helpers in proper and safe rigging practices.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.\n, • This position may require exposure to high noise levels.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO DO THE WORK WITHOUT MORE THAN NORMAL SUPERVISION. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Summary You will serve as a MACHINIST LEADER in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: if you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help \n • You will set up and operate most types of conventional and computer numerical control machine tools such as lathes, vertical and horizontal boring mills; bench, milling machines; shapers; planers; grinders; thread cutters and drills.\n, • You will utilize many types of precision instruments and equipment such as vernier calipers, squares, protractors, micrometers, vee blocks, parallel bars, dial indicators, comparators, different gauges for accurate dimensions and tolerances.\n, • You will plan and lay out work from blueprints, work sheets, and drawings that may have missing or incorrect information.\n, • You will use shop mathematics and handbook formulas in computing and verifying dimensions in the planning, laying out, and final dimensional checking processes.\n, • You will produce desired cuts and finishes on various metals and other materials such as aluminum, brass, bronze, high carbon and alloy steels, chrome, nickel, titanium, molybdenum, super alloys, nylon, rubber, plastics, teflon, etc.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • This may be a Drug Testing position. If so, successful completion of a pre-employment drug test (including marijuana) is required.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.\n, • This position may require exposure to high noise levels.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Job Description Labor One is hiring Shipfitter Helpers for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description:This position is responsible for assisting with steel and aluminum structural work in all stages of repair and modernization of marine vessels including US Naval Vessels, Military Sealift Command, and commercial ships and barges while under the supervision of a supervisor and/or journeyman / 1st Class shipfitter. The position requires a basic understanding of structural repair procedures and a strong aptitude and ability to follow directions. The individual must possess knowledge of ship terminology, measurements, and the ability to read job specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Ability to comprehend instructions and general correspondence., 2. Working understanding of ship repair terminology and ship compartment location nomenclature., 3. Be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Ability to effectively communicate issues encountered during the job that are in conflict with the directions provided by the supervisor or journeyman / 1st class fitter., 5. Ability to read and interpret structural drawings, including weld symbols., 6. Basic understanding of hand and power tools used by shipfitters including but not limited to mauls, grinders, circular and reciprocating saws, and hand and magnetic drill., 7. Ability to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system., 8. Up to one (1) year of experience in a heavy industry. DUTIES AND RESPONSIBILITIES 1. Must comply with OSHA standards and shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor., 3. Work shifts and overtime as assigned., 4. Keeping the work area clean and safe at all times, especially at the end of the shift., 5. Understand relevant work processes, operation of equipment, before commencing work., 6. Complete daily work assignments and provide status of unfinished work to the journeyman or supervisor., 7. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment. 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 8. Respond to visual, verbal, and audible sounds/commands., 9. Work at heights above 12' from ladders, scaffolding, and manlifts., 10. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 11. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 12. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 1st Shift 40 Hrs per Week OT per hiring Managers approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

The Marine Electrician-Level IV Technician will provide troubleshooting, maintenance, repair and material assessment of various types of boat electrical systems and components in accordance with Navy guidance and OEM technical specifications in CONUS & OCONUS locations, as required. ROLES AND RESPONSIBILITIES: • Uses technical knowledge and experience to troubleshoot and identify causes for equipment/system failure to the component level., • Ability to perform services in accordance with applicable OEM tech manuals., • Maintain and repair boat electrical systems and communications equipment to include but not limited to:, • Running lights, • Battery system, • GENTEX communication boxes, • UHF and VHF tactical communications equipment, • Satellite communications (SATCOM), • 110A Alternators, • Battery Isolators, • Furuno radar displays and radome, • VIC 3 and VIC 5 Communications systems, • H.S. Diploma or equivalent., • Minimum of 5 years' general experience in their respective trade and at least 3 consecutive years of experience repairing and troubleshooting the aforementioned boat electrical systems and communication equipment., • Familiarity with Navy Boat Information Book (BIB) and drawings., • Comprehension & application of technical documentation - Manuals & drawings., • Knowledge of proper use of diagnostic equipment., • Possess basic computer skills with working knowledge of Microsoft Outlook, Word and Excel., • Possess organizational skills., • Possess effective oral and written communication., • Must be able to lift, carry and transport heavy equipment and boxes up to 50 lbs., • Ability to work in a field environment for extended periods (and in some cases, areas of extreme heat and humidity such as Guam, Djibouti, Bahrain, etc.)., • Ability to be able to work in maintenance shop environment, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions., • Possess or ability to obtain and maintain a secret clearance, • Travel requirement less than 25%, • Ability to travel overseas when required Please note: The annualized pay range referenced is a general guideline. Solvere Technical considers factors such as (but not limited to) the following when determining base pay: scope and responsibilities of the position, candidate's related work experience, education/training/certifications, key skills, internal peer equity/external market competitiveness, as well as other business considerations. BENEFITS Solvere offers a comprehensive and generous benefits package. The Solvere benefits package includes medical, dental, and vision insurance for the employee and/or families. Solvere also includes basic life insurance plus short- and long-term disability for the employee. Employees may elect to enroll in our company's 401k plan. Employees will also accrue paid time off and holidays. Additional voluntary options include supplemental insurance plans. About the Company Visit: Solvere Technical Group is committed to non-discrimination and equal employment opportunity. All qualified applicants will receive consideration for employment without discrimination based on disability, protected veteran status or any other characteristics protected by law.

Job Description Company Overview: Continental Tide Defense Systems Inc. (Continental Tide) is headquartered in Reading, PA with additional locations in Philadelphia; San Diego, CA; Bremerton, WA and Norfolk, VA. We specialize in providing engineering and industrial services to the US Navy, Coast Guard, Military Sealift Command, and other Department of Defense Organizations. At Continental Tide, we understand that a great company culture is one where employees know their voice is heard, no matter what their title is, and letting them grow in their role as the company does. We want to provide our employees with the opportunity to learn, be challenged and be in a position where they can succeed, develop new skills, and do things they wouldn't have the opportunity to do elsewhere. Our fast-paced and challenging environment, employees here at Continental Tide can catapult themselves to the top and we're looking for "the best at what they do" to join our team and help us grow in new ways. Strong attention to detail is essential as you will be fully engaged from the first day. We are always looking for top-talent and we look forward to new-thinkers and team-players joining our company! We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and a 401(k)-retirement plan with company match. Continental Tide is searching for skilled Marine Electricians for our Fleet Services Group - West. Candidates must possess a high school diploma, GED or industrial school certificate, a willingness to travel and a minimum of three (3) years of practical shipboard experience with HM&E systems and equipment. *Please note due to the anticipated volume of responses, we will contact only those candidates who most closely match our requirements. Only local candidates will be considered. Essential Duties & Responsibilities: \n • Practical shipboard experience with HM&E systems and equipment.\n, • Ability to troubleshoot and diagnose issues with shipboard electronic and electrical system and equipment.\n, • Understand and interpret electrical schematics and installation drawings.\n, • Experience with NAVSEA cableway and connectorization, certification is a plus.\n, • Technical expertise with power generation and transmission equipment, and motorized valve actuators.\n, • Programmable Logic Controllers (PLCs), fiber optics and integrated network system experience is preferred.\n\n Experience and Skills Requirements include: \n • Ability to read, interpret, and understand simple schematics and blueprints.\n, • Repair and replace cables and connectors.\n, • Work involves participating in the installation, maintenance of Combat Systems, PLCs, AC and DC generators, switchboards, distribution panels, lighting and alarm circuits.\n, • Troubleshoot, repair and install electronic and electronic equipment and cables.\n, • Applicant must be familiar with NAVSEA, standard concepts, practices, and procedures within the field of electrical repair, fabrication, and installation.\n, • Must have or have the ability to obtain a SECRET clearance and must be able to obtain DBIDS and be able to access local shipyards and US Navy bases.\n, • Must possess basic hand tools.\n, • Candidate must be able to walk, stand for long periods of time, sit, bend, stretch, reach, squat and twist.\n, • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs.\n, • Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces.\n, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels.\n, • Certified in "Multi-pin" Connectors IAW MIL-STD-20035A (SA) is a MUST.\n, • Certified in Fiber Optic: CFOS/O, CFOS/C, CFOS/S, CFOS/T, CFOS/FC is a PLUS.\n, • Minimum of three (3) years' experience as a marine electrician.\n, • Must be familiar with NAVSEA Standard Item requirements.\n, • Currently certified to accomplish wire way inspections in accordance with NAVSEA Standard Items.\n, • Microsoft Office knowledge is a plus.\n, • Pulling and splicing wires.\n, • Circuit Labeling.\n, • Circuiting testing and troubleshooting.\n\n Job Benefits Benefits: Continental Tide offers an empowering professional environment in a culture that stresses teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Continental Tides Defense Systems, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. See all of our latest opportunities at or follow us on our LinkedIn page at . To be considered you must apply by going to . "This contractor and subcontractor shall abide by the requirements of 41 CFR 60-300.5(a). This regulation prohibits discrimination against qualified protected veterans, and requires affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified protected veterans."

Requisition Number: 28242 Required Travel: 11 - 25% Employment Type: Full Time/Hourly/Non-Exempt Anticipated Salary Range: $49,289.00 - $55,120.00 Security Clearance: Ability to Obtain Level of Experience: Mid This opportunity resides with Global Security (GS). Mission Technologies' Global Security (GS) group comprises live, virtual, constructive (LVC) solutions; fleet sustainment; nuclear and environmental; and Australia business. As a trusted partner to our military customers, HII designs, develops and operates the largest LVC enterprise that prepares warfighters for cross-domain battle. With advanced technologies to enable mission readiness, HII understands that preparation requires full coordination-not readiness in piece-parts. For more than 40 years, the U.S. Navy has entrusted HII to maintain and modernize the vast majority of its fleet. With a holistic approach to life-cycle maritime defense systems-from small watercraft to submarines, surface combatants and aircraft carriers-HII ensures a high state of readiness. HII supports the Department of Energy's national security mission through the management and operation of its sites, as well as the safe cleanup of legacy waste across the country. HII meets clients' toughest nuclear and environmental challenges. Leadership Mindset at HII - Mission Technologies Leadership at HII is a mindset, not a title. Through our Leadership Capability Framework, we define how every team member contributes to our mission and culture: • \nKnow & Grow Your People - Commit to learning and supporting team success., • \nBuild Relationships - Communicate openly, collaborate well, and build trust., • \nTake Ownership - Deliver on commitments and take pride in your work., • \nCustomer First - Focus on the mission and those we serve., • \nShape the Future - Bring ideas, curiosity, and continuous improvement. Summary For over a century, HII has built and maintained the U.S. Navy's most powerful warships. Join us as we continue to maintain the Navy's readiness! We are seeking a Marine Electrician to serve on our SEMAT Combat Systems team located in San Diego, CA. This Marine Electrician will be responsible for performing maintenance and maintenance training to assist shipboard personnel in the operation, maintenance and repair of specific items of engineering systems/equipment onboard USN Surface Ships. *This role does not provide relocation assistance. What You Will Do • Master understanding of production and processes. Responsible for interfacing with customers, managing subcontractors and ability to provide work direction to others. May provide direction and lead others., • May manage one or more multiple jobs. Completes comprehension of specialty trades functions and tools. Performs a variety of complicated and non-routine tasks., • Develops and uses technical documents including controlled work packages, formal work processes and procedures, test documents, reports and task or trip reports., • Schedules, reports and briefs customers and senior management. May perform quality inspections on finished product. Performs duties outside of specialty in order to complete installation or work assignment., • Will be required to assist Ship's Force personnel with troubleshooting electrical and electronic components to determine all problems and assist with restoring Combat Systems equipment.\n What You Must Have • High School education, or Trade School or equivalent, and 4 years of related experience., • Must be able to obtain and maintain a DoD security clearance., • Must have experience as a shipboard electrician/electronics trades specialty with 4 or more years of shipboard maintenance and repair experience., • Must be able to read and interpret equipment and systems ship drawings and ship technical documents and manuals., • Must be competent in the use of shipboard electrical equipment and tools in corrective repair efforts in order to accomplish ship repairs., • Must provide own hand tools as designated per trades specialty., • Must be physically able to climb and work on ships in an industrial environment., • Start date contingent upon approved DBIDS for base access, which is required for this position and continued employment.\n Bonus Points For • Recent Marine Electrical/Electronic shipboard experience on USN ships., • Prefer former ET/IC/FC Navy ratings with shipboard troubleshooting and repair experience., • Prefer Fiber Optic and copper/connector wiring technical/professional certifications., • NAVSEA Cableway certification., • A current, valid DoD security clearance.\n Physical Requirements Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces. Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels. May ride ships at sea for extended periods. May require wearing a respirator. Travel may be required within and outside of the continental United States. The listed salary range for this role is intended as a good faith estimate based on the role's location, expectations, and responsibilities. When extending an offer, HII's Mission Technologies division takes a variety of factors into consideration which include, but are not limited to, the role's function and a candidate's education or training, work experience, and key skills. Meet HII's Mission Technologies Division Our team of more than 7,000 professionals worldwide delivers all-domain expertise and advanced technologies in service of mission partners across the globe. Mission Technologies is leading the next evolution of national defense - the data evolution - by accelerating a breadth of national security solutions for government and commercial customers. Our capabilities range from C5ISR, AI and Big Data, cyber operations and synthetic training environments to fleet sustainment, environmental remediation and the largest family of unmanned underwater vehicles in every class. Find the role that's right for you. Apply today. We look forward to meeting you. To learn more about Mission Technologies, click here for a short video: HII is more than a job - it's an opportunity to build a new future. We offer competitive benefits such as best-in-class medical, dental and vision plan choices; wellness resources; employee assistance programs; Savings Plan Options (401(k)); financial planning tools, life insurance; employee discounts; paid holidays and paid time off; tuition reimbursement; as well as early childhood and post-secondary education scholarships. Bonus/other non-recurrent compensation is occasionally offered for qualified positions, and if applicable to this role will be addressed by the recruiter at the screening phase of application. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. Our workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to [email protected] and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this email address. Additionally, you may also call 1-844-849-8463 for assistance. Press #3 for HII Mission Technologies.

Requisition Number: 28242 Required Travel: 11 - 25% Employment Type: Full Time/Hourly/Non-Exempt Anticipated Salary Range: $49,289.00 - $55,120.00 Security Clearance: Ability to Obtain Level of Experience: Mid This opportunity resides with Global Security (GS). Mission Technologies' Global Security (GS) group comprises live, virtual, constructive (LVC) solutions; fleet sustainment; nuclear and environmental; and Australia business. As a trusted partner to our military customers, HII designs, develops and operates the largest LVC enterprise that prepares warfighters for cross-domain battle. With advanced technologies to enable mission readiness, HII understands that preparation requires full coordination-not readiness in piece-parts. For more than 40 years, the U.S. Navy has entrusted HII to maintain and modernize the vast majority of its fleet. With a holistic approach to life-cycle maritime defense systems-from small watercraft to submarines, surface combatants and aircraft carriers-HII ensures a high state of readiness. HII supports the Department of Energy's national security mission through the management and operation of its sites, as well as the safe cleanup of legacy waste across the country. HII meets clients' toughest nuclear and environmental challenges. Leadership Mindset at HII - Mission Technologies Leadership at HII is a mindset, not a title. Through our Leadership Capability Framework, we define how every team member contributes to our mission and culture: • \nKnow & Grow Your People - Commit to learning and supporting team success., • \nBuild Relationships - Communicate openly, collaborate well, and build trust., • \nTake Ownership - Deliver on commitments and take pride in your work., • \nCustomer First - Focus on the mission and those we serve., • \nShape the Future - Bring ideas, curiosity, and continuous improvement. Summary For over a century, HII has built and maintained the U.S. Navy's most powerful warships. Join us as we continue to maintain the Navy's readiness! We are seeking a Marine Electrician to serve on our SEMAT Combat Systems team located in San Diego, CA. This Marine Electrician will be responsible for performing maintenance and maintenance training to assist shipboard personnel in the operation, maintenance and repair of specific items of engineering systems/equipment onboard USN Surface Ships. *This role does not provide relocation assistance. What You Will Do • Master understanding of production and processes. Responsible for interfacing with customers, managing subcontractors and ability to provide work direction to others. May provide direction and lead others., • May manage one or more multiple jobs. Completes comprehension of specialty trades functions and tools. Performs a variety of complicated and non-routine tasks., • Develops and uses technical documents including controlled work packages, formal work processes and procedures, test documents, reports and task or trip reports., • Schedules, reports and briefs customers and senior management. May perform quality inspections on finished product. Performs duties outside of specialty in order to complete installation or work assignment., • Will be required to assist Ship's Force personnel with troubleshooting electrical and electronic components to determine all problems and assist with restoring Combat Systems equipment.\n What You Must Have • High School education, or Trade School or equivalent, and 4 years of related experience., • Must be able to obtain and maintain a DoD security clearance., • Must have experience as a shipboard electrician/electronics trades specialty with 4 or more years of shipboard maintenance and repair experience., • Must be able to read and interpret equipment and systems ship drawings and ship technical documents and manuals., • Must be competent in the use of shipboard electrical equipment and tools in corrective repair efforts in order to accomplish ship repairs., • Must provide own hand tools as designated per trades specialty., • Must be physically able to climb and work on ships in an industrial environment., • Start date contingent upon approved DBIDS for base access, which is required for this position and continued employment.\n Bonus Points For • Recent Marine Electrical/Electronic shipboard experience on USN ships., • Prefer former ET/IC/FC Navy ratings with shipboard troubleshooting and repair experience., • Prefer Fiber Optic and copper/connector wiring technical/professional certifications., • NAVSEA Cableway certification., • A current, valid DoD security clearance.\n Physical Requirements Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces. Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels. May ride ships at sea for extended periods. May require wearing a respirator. Travel may be required within and outside of the continental United States. The listed salary range for this role is intended as a good faith estimate based on the role's location, expectations, and responsibilities. When extending an offer, HII's Mission Technologies division takes a variety of factors into consideration which include, but are not limited to, the role's function and a candidate's education or training, work experience, and key skills. Meet HII's Mission Technologies Division Our team of more than 7,000 professionals worldwide delivers all-domain expertise and advanced technologies in service of mission partners across the globe. Mission Technologies is leading the next evolution of national defense - the data evolution - by accelerating a breadth of national security solutions for government and commercial customers. Our capabilities range from C5ISR, AI and Big Data, cyber operations and synthetic training environments to fleet sustainment, environmental remediation and the largest family of unmanned underwater vehicles in every class. Find the role that's right for you. Apply today. We look forward to meeting you. To learn more about Mission Technologies, click here for a short video: HII is more than a job - it's an opportunity to build a new future. We offer competitive benefits such as best-in-class medical, dental and vision plan choices; wellness resources; employee assistance programs; Savings Plan Options (401(k)); financial planning tools, life insurance; employee discounts; paid holidays and paid time off; tuition reimbursement; as well as early childhood and post-secondary education scholarships. Bonus/other non-recurrent compensation is occasionally offered for qualified positions, and if applicable to this role will be addressed by the recruiter at the screening phase of application. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. Our workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to [email protected] and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this email address. Additionally, you may also call 1-844-849-8463 for assistance. Press #3 for HII Mission Technologies.

Job DescriptionLabor One is hiring Journey-Level Riggers for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (956)382-2631 (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The qualifications listed below are representative of the knowledge, skill, and/or ability desired. The individual must have working knowledge of procedures, strong mechanical aptitude and ability, and be able to follow directions. The individual must possess experience in the trade; knowledge of ship terminology, blueprint reading, job specifications and manuals. Must be able to follow directions and work with limited supervision. Must be willing to work with and train subordinates. SAFETY Must comply with Company safety rules and OSHA standards. Must be physically and medically qualified to wear required personal protective equipment as prescribed under OSHA standards. ESSENTIAL QUALIFICATIONS, DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Technically proficient in tasks, work processes, and equipment operation. Accountable for completion of daily work assignments including the completion and signatures for work completion and quality. Creates a working environment for compliant with quality, safety, environmental, and health regulations and policies. Thorough knowledge of equipment used in rigging operations, included but not limited to lifting and moving equipment. Knowledge of rigging testing requirements, proper set up and operation of equipment. Selects cables, pulleys, winches, blocks, and sheaves, according to weight and size of load to be moved. Attaches pulley and blocks to fixed overhead structures such as beams and ceilings with bolts and clamps. Attaches load with lifting devices such as wires, nylon straps and chains to crane hook. Gives directions to crane operator engaged in hoisting and moving loads to ensure safety of workers and material handled. Sets up cranes hoisting equipment. Safe handling of anchors and chains. Lowers, handles and tests lifeboats. Tests ships cranes using various rigging. Ability to interpret all crane load charts and blueprints. Ability to work any assigned shift and ability to work assigned overtime. May be assigned tasks outside craft as required. Must comply with the Company's Non-Discrimination and Anti-Harassment Policy which expects that all relationships among persons in the workplace will be business like and free of bias, prejudice, and harassment EDUCATION and/or EXPERIENCE Must complete practical demonstration of skills listed above. LANGUAGE SKILLS Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations before customers, clients, or employees of organization. MATHEMATICAL SKILLS The ability to add, subtract, multiply, and divide all units of measure, whole numbers, common fractions, and decimals in U.S. and metric conversions. REASONING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems that may arise in certain situations. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. Specific requirements include the following: 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Demonstrate the ability to bend, squat crouch, crawl and kneel., 4. Demonstrate the ability to climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Perform prolonged standing (2-3 hours)., 6. Able to work at a variety of levels (ex. Waist, eye, above head)., 7. Demonstrate the ability to safely and appropriately use required tools and equipment., 8. Demonstrate good balance while working on uneven surfaces and maneuvering obstacles., 9. Posses sufficient handgrip and coordination to carry and operate tools and equipment., 10. Ability to utilize personal protective equipment (hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards., 11. Ability to withstand extreme temperatures (cold and hot)., 12. Ability to enter 18 x 36 openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 13. Able to respond to verbal and audible sounds/commands., 14. Able to utilize adequate visual skills., 15. Ability to work at heights above 12 while working from ladders, scaffolding and/or manlifts., 16. Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 17. Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers. 18. Ability to turn head from side to side and about on the vertical axis., 18. Ability to turn body at the waist from side to side and about the vertical axis. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the environment varies from normal office environment to wet and/or humid conditions, outside weather conditions, extreme cold, and extreme heat. The employee is occasionally exposed to moving mechanical parts and high places. The noise level in the shipyard environment is usually loud; office environment is usually low to moderate. The wearing of appropriate personal protective equipment mitigates risks associated with these conditions and is mandatory. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job DescriptionDescription: POSITION TITLE: Career Services Coordinator REPORTS TO: Career Services Manager FLSA STATUS: Non-exempt COMPENSATION: $26.44-$32.50/Hr. LOCATION: San Diego, CA Who we are: Kitchens for Good (KFG) transforms lives through culinary arts. Position Summary: The Career Services Coordinator serves as a critical member of the team to support the apprentices in successfully completing the apprenticeship program by providing coaching, job searching assistance and case management support to address the needs of apprentices. Essential Functions & Responsibilities: • Serve as the primary contact for apprentices during their year-long apprenticeship, building and maintaining rapport to ensure they receive the support needed to fulfill apprenticeship requirements., • Individually meet with apprentices on a regular basis to provide coordination of career coaching, job searching support, and resource navigation services., • Facilitate and teach established career readiness curriculum, providing apprentices with the soft skills necessary to successfully obtain and maintain careers in the food service and hospitality industry. Curriculum includes but is not limited to: resume building, time management, teamwork, and effective communication., • Collaborate with Chef Instructors to provide ongoing feedback on apprentice skill development, ensuring clear evaluations that support growth., • Partner with Employment Coordinator to match apprentices with Transitional Employment or KFG Employer Network opportunities based on skillsets, job readiness evaluations, and workplace fit., • Provide apprentices with support on self-guided job search techniques, such as assistance with job applications and interview preparation, and assist apprentices with finding job opportunities that fit their skills, job readiness, and work style. As needed, provide support to alumni in identifying and securing employment opportunities., • Provide coaching to Transitional Employment apprentices, incorporating supervisor evaluations and collaborative meetings to monitor performance and skill development., • Maintain frequent communication with apprentices to ensure that they are receiving all the support they need to retain employment. Provide support and troubleshooting when an apprentice has performance issues at their job., • Work with social service agencies to make case management referrals and track progress, while initiating partnerships with organizations that support apprentice needs. Maintain an up-to-date agency contact directory., • In collaboration with the Programs team, support key performance outcomes, including completion of initial training, job placement, job retention, and program completion., • Maintain accurate records in applicant tracking and CRM systems., • Maintain confidentiality of sensitive information, ensuring case notes are accurately and efficiently documented in compliance with federal and state regulations., • Strong verbal and written communication skills. Comfortable with public speaking and be able to communicate ideas and feedback professionally and concisely in individual and group settings., • Person-focused, with the ability to relate to, empathize with, and support individuals from diverse backgrounds using a trauma-informed approach., • Ability to collaborate, communicate, and work effectively in a team., • Self-motivated and results driven., • Adaptable, with the ability to adjust to changing priorities, environments, and program needs., • Well-developed organizational skills together with ability to manage priorities and meet deadlines and timeframes. This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. In addition to the kitchen, this job operates in a kitchen environment, housed with equipment such as an oven, stove, dishwasher, slicer, coffee machine, steamer, mixer and chef’s knives. The employee is frequently exposed to heat steam, fire and noise. Physical Demands: The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is routinely required to sit, stand, reach, lift, bend, kneel, stoop, climb, push, and pull items weighing 25 pounds or less. The position requires manual dexterity; auditory and visual skills, and the ability to follow written and oral instructions and procedures. Position Type/Expected Hours of Work: This is a full-time non-exempt position with a working schedule of Monday – Friday 8:00am-4:30pm, however occasional evening and/or weekend may be required. Travel: Employee will be expected to travel to as needed, to additional KFG locations and employer partner sites. Employee must have driver’s license, reliable transportation, and the ability to work across multiple sites. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Benefits: • Medical, dental, and vision coverage, • 403(b) retirement savings, • Group-term life insurance coverage, • Professional development budget, • 13 paid holidays At Kitchens for Good, we are committed to pay transparency and equity. The base salary range for this position is provided to ensure clarity and fairness in our hiring process. The final salary offered will be determined based on a variety of factors, including your education, relevant experience, skills, and knowledge. We also take into account internal equity to ensure consistency and fairness across our team. Please note that the listed range reflects the full salary potential for the role. Offers at the top of the range are not typical, as we aim to support long-term growth and advancement within the organization. Acknowledgment: Qualified individuals must be able to perform the essential duties of the position with or without accommodation. A qualified person with a disability may request a modification or adjustment to the job or work environment in order to meet the physical requirements of the position. Kitchens for Good will attempt to satisfy requests as long as the accommodation needed is reasonable and no undue hardship would result. AT-WILL: The individual hired in this role will be at-will and will be subject to termination by the employee or the Company, with or without cause, with or without notice, and at any time. AMERICANS WITH DISABILITIES ACT (ADA) STATEMENT: The Company will provide reasonable accommodations (such as a qualified sign language interpreter or other personal assistance) with the application process upon your request as required to comply with applicable laws. If you have a disability and require assistance in this application process, please contact Juanita Atitsogbuie at 619-736-1873 or . To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. EQUAL EMPLOYMENT OPPORTUNITY (EEO) STATEMENT: The Company is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender or gender identity, national origin, disability status, protected veteran status or any other characteristic protected by state or federal law. Requirements: Education & Work Experience: • 4 years' work experience as a case manager, career coach, or relevant experience in a mentoring or advising role; or Bachelor’s degree + 2 years' work experience as a case manager, career coach, or relevant experience in a mentoring or advising role., • Demonstrates a people-centered coaching approach reflecting compassion, respect, and integrity., • Experience working with any or all of the following:, • Foster youth, • Ex-offenders/formerly incarcerated, • Addiction, recovery, and other life-challenges, • Job training, job placement, adult education, and adult literacy, • Relevant lived experience (highly desirable)., • Knowledge of workforce or industry trends in the food service and hospitality industry (desirable)., • Proficient in Microsoft office 365 programs (Excel, Word, Power Point, One Drive, and Share Point).

Job Description We're looking for Customer Advocates with at least 2 years of customer-facing experience to build an exciting career at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500! Whether it's delivering happiness to customers on the driveway or getting involved in the local community, our Customer Advocates are leading the charge in reintroducing happiness into the car-buying process. Ready to join the 'Hauler-Life'? Shift Requirement: The hours for this position are from 7am - 5pm, 9am - 7pm or 11am - 9pm. We ask that team members be available to work 7 days a week. Days off will rotate between weekdays and weekend days. Unlock Your Earning Potential! We offer a competitive starting hourly rate of $22/hr with significant growth opportunities based on performance. You can boost your earnings within a short timeframe: • Pay Range: $22-$24 hourly, • Starting Pay: $22/hr, • At 3 Months: $22.50/hr And that's not all! Market Operations may offer other performance-based incentive programs specific to your location, potentially unlocking even greater earnings. Benefits + Perks: We continually invest in our team members' success because when our team members grow, we grow. Here is how we invest in you: • Compensation: Competitive, Performance-Based Compensation PLUS 401(k) with Carvana match, opportunity for overtime during busy seasons, • Fast Track Advancement Opportunities: Stellar performers achieve higher pay rates sooner based on performance. Hard work and stellar performance won't go unnoticed., • Health & Wellness: 100% Company Paid Healthcare Premiums plus Dental + Vision benefits. Wellness program to support mental, physical and financial health. We know pets are family too! Benefit from our pet care savings program to keep your furry friends healthy and happy., • Time Off & Work-Life Balance: Generous paid time off (13 days for the first year, increases to 20 days thereafter), • Education Support: We support you depending on where you are at in your education journey - if you are looking to pursue a bachelor's degree, we offer tuition reimbursement. And if you already have your bachelors degree we have a student loan repayment program!, • Equity: Carvana Shares is something that we grant to our team members on an annual basis where you get to be an 'owner' in the company. We also offer an Employee Stock Purchase Plan discount!, • Professional Development: Extensive internal growth and professional development opportunities We're looking for enthusiastic, energetic, and self-motivated team players with at least 2 years of customer-facing experience to: • Deliver vehicles straight to customers' doors with our custom car haulers (don't worry - a commercial license is not required to drive the hauler and you will receive ample training), • Frequently load/unload vehicles onto the hauler (this part does require getting physical!) and regularly inspect the car-hauler to make sure the vehicle maintains safe to drive, • Complete customer paperwork and include thorough notes in our customer tracking system, • Consistently drive safe and maintain a clean driving record in accordance with Carvana's CMV Driver Qualification policy., • Candidates must have (or be able to obtain) a Notary in your local jurisdiction within the first 90 days of employment (process sponsored by Carvana). This process may involve satisfying state-specific requirements. For further details, candidates can review their local state notary requirements here: State Notary Requirements., • Candidates must be able to satisfy state-specific requirements related to access DMV/title and registration systems., • Illinois, Michigan, Louisiana, and Missouri employees must obtain a Chauffeur's license or any other state specialty license within the first two weeks of employment (process sponsored by Carvana)., • California employees must obtain a Vehicle Verifier license within the first 90 days of employment (Process sponsored by Carvana). General qualifications and requirements • Ability to perform physically demanding tasks like detailing vehicles and loading/unloading vehicles onto our haulers in indoor and outdoor conditions with occasional exposure to inclement/extreme weather (some markets may require deliveries to be made in the snow, while other markets require deliveries to be made in the summer heat)., • Ability to walk/stand and sustain physical activity for extended periods of time (8+ hours), • Must be able to read, write, speak and understand English, • Requires high and low levels of movement with the ability to reach with arms, twist, kneel, crouch, climb, balance, and squat, • Requires the grasping, carrying, lifting, pushing, and pulling of items of 50lbs. Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. All applicants must pass a drug test and obtain a DOT Medical Card. This roles is not eligible for visa sponsorship. Must be at least 21 years of age and possess a valid driver's license. Must be able to read, write, speak, and understand English."

Job Description Join our fast-paced and passionate team as a Principal Photonics Process Development Engineer with deep expertise in optical fiber processes. As we scale, you will play a critical role in building robust, production-ready fiber handling and integration capabilities from the ground up. This is a highly hand-on on role for a self-starter who thrives in a dynamic startup environment. You will work closely with device, optical, mechanical, and manufacturing engineers to turn fragile photonic designs into reliable, manufacturable products—with particular ownership over fiber-based processes and interfaces. You’ll have the opportunity to define best-in-class methods for fiber preparation, handling, and integration, while influencing tooling, automation, and overall process architecture. Key Responsibilities: Own and lead development of fiber-centric processes, including: • Precision fiber cleaving (single-mode, PM, specialty fibers), • Fusion splicing (including low-loss and polarization-maintaining alignment), • Fiber endcapping and thermal management strategies, • Fiber cleaning, preparation, and contamination control, • Fiber-to-device coupling and active alignment, • Integration of fibers into packages (TO, butterfly, micro-optic assemblies), • Die attach (epoxy, eutectic, solder), • Wire bonding (Au, Al; ball and wedge), • Design and execute DOE to improve coupling efficiency, yield, and reliability, • Transition processes from R&D to pilot and production environments, • Develop process flows, work instructions, and manufacturing documentation, • Perform root-cause analysis on optical loss, fiber damage, and reliability failures, • Work with equipment vendors on fiber tooling (splicers, cleavers, inspection systems), • Support qualification, reliability testing, and failure analysis, • BS or MS in Optical Engineering, Electrical Engineering, Materials Science, Mechanical Engineering, Physics, or related field, • Typically 8+ years of relevant experience in photonics or optoelectronic process development, • 5+ years with demonstrated hands-on expertise with fiber processes in a production or R&D environment Core Skills: • Fiber cleaving, stripping, and preparation across a range of fiber types, • Fusion splicing (including PM fiber alignment and loss optimization), • Fiber endcapping and high-power handling considerations, • Fiber inspection and failure analysis techniques, • Strong understanding of contamination control and cleaning methods, • Experience with fiber alignment and coupling optimization, • Die bonding and solder attach, • Wire bonding (ball or wedge), • Familiarity with vacuum reflow processes, • Strong understanding of process control, yield improvement, and manufacturability, • Comfortable working in lab and cleanroom environments, • Experience with high-power fiber systems or laser modules, • Familiarity with hermetic packaging (butterfly / TO-can / micro-optic packages), • Experience with active alignment systems and automated assembly platforms, • Reliability testing experience (thermal cycling, HTOL, damp heat), • Knowledge of statistical process control (SPC) and manufacturing metrics, • Hands-on, detail-oriented, and execution-focused, • Comfortable working in a fast-paced evolving environment, • Proactive in identifying problems and driving solutions The expected annual salary range for this position is $175,000-$225,000. As a full-time employee, you will be eligible for Monarch’s comprehensive benefits package, which includes: • Medical, Dental, and Vision insurance, • Fidelity 401(k) plan with 4% employer matching, • 20 paid time off (PTO) days per year, • 13 paid company holidays, • 9/80 work schedule (every other Friday off) Monarch Quantum is proud to be an equal opportunity employer and does not discriminate on the basis of race, color, citizenship status, national origin, ancestry, sex, sexual orientation, age, religion, creed, physical or mental disability, medical condition, marital status, veteran status or any other characteristics protected under applicable federal, state and local laws.

Job Description Join our fast-paced and passionate team as a Principal Photonics Process Development Engineer focused on advanced packaging and tooling. As we scale, you will be instrumental in building our manufacturing foundation from the ground up. This is a dynamic, hands-on role for a highly self-directed engineer who thrives in an ambiguous, fast-moving environment. You will play a critical role in establishing scalable photonic manufacturing processes that directly enable product performance, reliability, and cost targets. Your work will define how our technology transitions from prototype to production. You will collaborate closely with device, optical, electrical, mechanical, and manufacturing engineers to transform delicate photonic designs into robust, manufacturable, high-yield products. Impact: • Establish core assembly and packaging processes that enable company growth, • Define manufacturing strategies that scale from R&D to production, • Improve yield, reliability, and cost through process innovation and optimization, • Vacuum reflow soldering (AuSn, SAC, Indium, and related materials), • Wire bonding (Au and Al; ball and wedge), • Die bonding (epoxy, eutectic, and solder attach), • Optical assembly and active alignment (lenses, isolators, fiber arrays), • Fiber splicing and precision fiber handling (including PM alignment), • Hermetic sealing (laser welding, parallel seam sealing), • Adhesives and material characterization, • Process metrology and inspection (shear/pull testing, vision systems, interferometry, hermeticity testing), • Own end-to-end development of photonic assembly processes from concept through production release, • Define and execute the process development roadmap aligned with product and manufacturing goals, • Design statistically rigorous experiments (DOE) to optimize process windows, robustness, and yield, • Manage the process control limits, qualification criteria, and acceptance metrics, • Transition processes from R&D to pilot and full manufacturing scale, • Lead process transfer to production, including equipment qualification (IQ, OQ, PQ), • Drive yield improvement initiatives and root-cause investigations for failures and reliability issues, • Establish engineering standards, documentation, and best practices, • Develop process flows, work instructions, travelers, and training materials, • Determine appropriate Design for Manufacturability (DFM) principles and ensures tolerance analysis follows best practices, • Manages the improvement of process capability (Cp/Cpk), • Performs qualification, reliability testing, and failure analysis (including FMEA), • Design precision fixtures, tooling, and mechanisms to enable repeatable assembly and alignment, • Collaborate with mechanical engineers and equipment vendors to develop manufacturable solutions and automation, • Mentor junior engineers and technicians and provide technical leadership across cross-functional teams, • Ensure adherence to cleanroom protocols and contamination control practices, • BS or MS in Optical Engineering, Electrical Engineering, Materials Science, Mechanical Engineering, Physics, or a related field, • Typically 8+ years of relevant experience in photonics or optoelectronic process development, • Experience with laser diodes, PICs, modulators, detectors, or optical transceivers, • Familiarity with hermetic packaging (butterfly, TO, or micro-optical packages), • Experience with active alignment systems, • Reliability testing experience (thermal cycling, HTOL, damp heat), • Knowledge of statistical process control (SPC) and manufacturing metrics, • Experience supporting low- to medium-volume production environments, • Comfortable operating in an evolving environment with changing priorities, • Motivated by building new capabilities and infrastructure from the ground up, • Willing to take ownership across multiple technical domains, • Hands-on and resourceful, with a strong bias toward execution Benefits The expected annual salary range for this position is $150,000-$200,000. As a full-time employee, you will be eligible for Monarch’s comprehensive benefits package, which includes: • Medical, Dental, and Vision insurance, • Fidelity 401(k) plan with 4% employer matching, • 20 paid time off (PTO) days per year, • 13 paid company holidays, • 9/80 work schedule (every other Friday off) Monarch Quantum is proud to be an equal opportunity employer and does not discriminate on the basis of race, color, citizenship status, national origin, ancestry, sex, sexual orientation, age, religion, creed, physical or mental disability, medical condition, marital status, veteran status or any other characteristics protected under applicable federal, state and local laws.

Job DescriptionDescription: Compensation & Benefits: • $18.50 to $21.00 per hour plus tips, • Paid Sick Leave, • Flexible schedule, • Discounts on meals, • Career advancement opportunities, • Set up workstations with all needed ingredients and cooking equipment., • Prepare all food items in a timely manner following all company and food safety guidelines., • Follow recipes, controls, portion and presentation specifications as set by the restaurant., • Follow proper presentation of plates and garnishes., • Maintain high standard and consistency of food quality and presentation., • Maintain in-depth knowledge of nutrition, common allergies, dietary restrictions and food terminology., • Handle, store and rotate all food products to maintain quality and safety., • Track and report food waste., • Maintain clean and orderly service areas and complete side work duties., • Comply with established safety and sanitation standards., • Adhere to company policies and standard procedures., • Accommodate guest requests with a positive attitude., • Complete assigned sidework at the beginning, during, and at end of shift., • Minimum 1+ years’ experience on a fast-paced line, working all stations., • Knowledge of safety procedures, including safe temperatures at which ingredients must be kept and to which food must be prepared to avoid foodborne illness., • A desire to help where needed and the ability to work as part of a team., • Ability to work positively and maintain composure in a fast-paced environment., • Ability to follow direct orders and recipes and to correctly prepare dishes to the standards of the restaurant., • Manual dexterity and hand-eye coordination to handle tools, such as knives for chopping, slicing, cutting, and dicing., • Must be able to stand, walk, reach, bend, stoop, wipe, and handle extreme heat for extended periods of time., • Must be able to frequently lift up to 35 pounds and occasionally lift/move up to 50 pounds., • Excellent communication skills., • Exceptional attention to detail., • Exhibit a professional appearance and mannerisms., • Food Handler Certification.

Job Description If you have your Branch 2 license and are looking for the right new opportunity to grow and thrive, then Innovative Pest Solutions has the perfect position for you! We're hiring a full-time Licensed Pest Control Technician to help protect homes and businesses throughout San Diego County, CA. You'll enjoy variety in your workdays and perform fulfilling hands-on work that positively impacts every client! Licensed Pest Control Technician Compensation: • Pay: We're offering a salary of $50,000 – $85,000+ per year (base pay & performance/production bonuses)., • Schedule: You'll work flexible hours during the day shift. We cover locations throughout SoCal., • Benefits: Our team members enjoy medical, dental, vision, a company retirement plan, PTO, holidays, and opportunities for growth in a stable, expanding company. We also provide our pest control team with a company vehicle, a fuel card, paid training, and licensing support. What You'll Tackle: • Inspecting homes and businesses for signs of pests before performing safe and compliant removal and heat treatment services, • Following all regulations and company policies as you remove bed bugs, structural pests, and more, • Detailing your work in accurate service reports, • Keeping your work truck and equipment clean and well-maintained, • Treating every client and property respectfully You'll Need: • Valid California Branch 2 license, • Current CA driver's license and a clean driving record, • Strong knowledge of IPM principles and pesticide safety practices, • Ability to lift 50+ lbs. and work in confined and heated environments, • Ability to serve locations throughout San Diego County, CA, • Professional appearance and customer service-focused attitude Bonus Qualifications: • Bilingual communication skills (English/Spanish), • Commercial pest control experience, • Heat treatment experience Why People Like It Here: Founded in 1994, Innovative Pest Solutions is a trailblazer in integrated pest management. We offer a range of services, including solutions for birds, bed bugs, heat issues, rodents, termites, and weeds. Each specialized division tailors its approach to meet specific needs, demonstrating our dedication to top-notch management. Despite our expansion, we foster a familial environment and prioritize the well-being of our employees. Join us today and contribute to the safety and health of our community! Apply in Moments: No red tape, just real opportunity. Fill out our initial, mobile-friendly application to make a tangible difference as our Licensed Pest Control Technician! Job Posted by ApplicantPro

Job Description Veridiam is a strategic manufacturing partner with over 60 years of experience serving the aerospace, industrial, medical, and nuclear markets. Our roots were formed in the exacting nuclear and aerospace industries, expanded into Medical where we have supplied critical components to a global customer base. We currently provide elegant solutions across a broad range of customers and diverse markets. At Veridiam we recognize that talent is at the forefront of our organization and define who we are in today's industry. POSITION SUMMARY Plan, manage and coordinate manufacturing work activities and resources necessary for manufacturing products to ensure on-time and on-budget execution in accordance with cost, quality, and quantity specifications. Provide direct leadership and oversight to supervisors and employees in production processes. ESSENTIAL DUTIES AND RESPONSIBILITIES • Plan, manage, coordinate and ensure work activities necessary in manufacturing products in accordance with cost, quality, and quantity specifications., • Manage production processes and activities involved in performing metal fabrication, cold drawing, cold rolling, machining, welding, assembly, and thermal processing (heat treat)., • Ensure monthly budgeted top and bottom-line targets are achieved., • Lead and develop team of production supervisors throughout multiple shifts., • Ensure the delivery and quality of product meets or exceeds customer and on-time delivery requirements., • Establish performance goals and metrics for direct reports and team., • Evaluate, facilitate, and drive process improvement to reduce waste and improve labor and process efficiencies., • Prepare, maintain and report out production status and reports., • Recommend, initiate, or execute personnel actions, including terminations, and performance management., • Participate in the recruitment life cycle including interviewing, hiring, onboarding, and training employees., • Manage and monitor employees and performance through coaching, counseling, monitoring and appraising work performance., • Works with cross functional teams and collaborates with other members of management and contributes to a team effort., • Ensure environmental, health and safety policies are followed in accordance with company policies and procedures., • Conduct and perform training as needed or required., • Demonstrates ability to appear for work on time, follow directions from a supervisor, interact well with co-workers, understand, and follow work rules and procedures, comply with company policies and procedures, goals, and objectives, and accepts constructive feedback. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals to perform the essential functions. Education and Experience: • Bachelor’s degree or equivalent education and experience., • Knowledge of metal forming, and/or machining methods preferred., • Excellent written and verbal communication skills., • Intermediate understanding of manufacturing product life cycle., • Intermediate understanding of enterprise resource program systems, product planning and scheduling., • Ability to prioritize and handle workflow., • Read and comprehend verbal and written instructions. Pay Rate: The final salary offered to a successful candidate will be dependent on several factors that may include but are not limited to the type and length of experience within the job, type, and length of experience with the industry, education, geographic location, etc. Veridiam is an Equal Employment Opportunity/Affirmative Action Employer. Veridiam will recruit, hire, train and promote persons into all jobs without regard to age, race, color, religion, ancestry, medical condition, sex, sexual orientation, gender identity, national origin, status as a veteran or status as an individual with a disability or any other characteristic or classification protected by law. Access to our facility (and, therefore, employment) is restricted under the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR) to U.S. Citizens, lawful permanent residents of the United States and properly licensed foreign persons. Applicants receiving a conditional offer of employment will be required to provide information to determine whether they are subject to these regulations and, if so, to assess their country of chargeability for export control purposes.

Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, we're inspired by the opportunities to innovate and break boundaries. We're proud to play a part in protecting the world's democracies. And we're committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees across 33 manufacturing sites in 12 countries we serve over 90% of the world's aircraft and engine manufacturers and achieved sales of £3.35 bn.in 2023. There are no limits to where you can take your career. Job Summary This position is responsible for setting up and operating all conventional tool room and CNC tool room equipment in the manufacture and repair of tooling, fixtures and gauges necessary for manufacturing process. Job Responsibilities • Set up and Operate CNC and manual Mills, and Lathes, Jig Bore, grinders, shear, roll, etc., • Willing to learn basic programming and editing of CNC programs., • Willing to learn (on the job) TIG and MIG welding, acetylene torch cutting, heat treating., • Use of hand tools, hammers, grinders, files, punches, measuring devices, etc., • Assembles new and existing tools and gauges to ensure proper function., • Performs preventive and routine maintenance to maintain machine performance., • Performs daily housekeeping tasks to provide a safe, clean and orderly workplace., • Other duties as assigned. Job Qualifications Required Experience: • High school education or GED equivalent, • 5+ years of machining experience or courses in mechanical drawing, shop mathematics and machining practices, • 3+ years of experience with precision measuring equipment (calipers, micrometers, and height gauges) and reading blueprints. Preferred Experience: • GKN Experience, • Vocational school graduate with courses in mechanical drawing, shop mathematics and machining practices or equivalent training and experience, • Product Knowledge, • Excellent verbal and communication skills, • Ability to distinguish between different types of metals, • Close attention and care required to prevent damage to parts and machine tools. Physical Experience: • Requires standing and walking for long periods., • Frequently requires stooping, squatting, kneeling and climbing., • Reaching above shoulder level with hands and arms., • Pushing and pulling wheeled items weighing up to 150 lbs., • Lifting and/or moving up to 60 lbs. independently or up to 100 lbs. with assistance., • Repetitive actions includes simple grasping, firm grasping and fine manipulation., • Specific vision abilities required including close vision, peripheral vision, depth perception and ability to adjust focus. Compensation Range The compensation range for this role is between $35.00 - $40.00 per hour. We'll offer you fantastic challenges and amazing opportunities. This is your chance to be part of an organisation that has proven itself to be at the cutting edge of our industry; and is committed to pushing the boundaries even further. And with some of the best training on offer in the industry, who knows how far you can go? A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles we've created a culture where everyone feels welcome to contribute. It's a culture that won us 'The Best Workplace Culture Award'. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. We're also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology.

Job DescriptionDescription: Material Coordinator – Lathe 6721 Cobra Way, San Diego, CA, United States Full-time Company Description Welcome to CoreDux USA, a leading innovator in the machining industry located in the vibrant Sorrento Valley area of San Diego. As a rapidly growing company, we specialize in providing high-precision machining solutions that cater to a wide array of industries, including aerospace, automotive, medical devices, and consumer electronics. Our commitment to quality and excellence has earned us a reputation for delivering exceptional products and services to our clients. At CoreDux USA, we pride ourselves on our state-of-the-art facility, equipped with cutting-edge technology and advanced machinery, enabling us to meet the most demanding project requirements with unparalleled accuracy and efficiency. Our team of skilled professionals is dedicated to pushing the boundaries of innovation and delivering results that exceed expectations. As we continue to expand our operations, we are looking for talented and motivated individuals to join our team. We offer a dynamic work environment that fosters professional growth, collaboration, and creativity. If you’re passionate and eager to be part of a company that values innovation and excellence, CoreDux USA is the perfect place for you. Join us on our exciting journey and contribute to shaping the future of the machining industry! “At this time, we are unable to sponsor applicants for employment authorization. All candidates must be legally authorized to work in the United States without current or future need for employer sponsorship.” Job Description Material Coordinator – Lathe Reporting To CNC Lathe Supervisor Department Production Salary $21 – $29 per hour (DOE) Role Objective We are seeking a reliable Material Coordinator – Lathe to support the Lathe department by managing the flow of raw material, work-in-process (WIP), and job kits in and out of the lathe cell. This role keeps the machines running by ensuring the right material, tooling, and paperwork are at the right machine at the right time. Key Responsibilities · Pull and stage raw bar stock, billets, and material kits for lathe jobs based on production schedule. · Prepare and deliver job kits to lathe operators including drawings, routers, setup sheets, and tooling. · Move work-in-process parts between lathe operations, inspection, and downstream departments. · Maintain accurate real-time visibility of material status and location in the lathe area. · Update ERP/MRP system with material moves, issues, and operation completions. · Coordinate with Purchasing and the Material Control team to flag material shortages before they impact production. · Support the Lathe Supervisor in production scheduling by tracking material availability and job readiness. · Maintain cleanliness, organization, and 5S standards in the lathe area and staging zones. · Assist with cycle counts, audits, and inventory accuracy initiatives. · Follow all AS9100 requirements for material identification, segregation, and traceability. Qualifications · High school diploma or GED. · 2+ years of material handling, inventory control, or production coordination experience in a manufacturing environment. · Familiarity with ERP/MRP systems (SAP, Oracle, Epicor, NetSuite, or similar). · Basic understanding of machining operations, raw material types, and cut-to-length requirements. · Ability to read and follow written work instructions, routers, and drawings. · Basic computer skills including Microsoft Excel and email. · Strong organizational and communication skills. · Ability to read, write, and communicate in English. Additional Information Preferred Skills · Prior experience supporting CNC lathe or machining operations. · Prior experience in AS9100 or ISO 9001 certified environments. · Forklift and/or pallet jack certification. · Familiarity with bar feeders, bar pullers, and bar stock handling. Physical Requirements · Ability to lift up to 50 pounds. · Ability to stand for long periods and move between different workstations. · Ability to wear required PPE for extended periods. · Ability to work in a shop environment with exposure to noise, heat, and other manufacturing conditions. All your information will be kept confidential according to EEO guidelines. Diversity, Equity, and Inclusion (DE&I) Statement At CoreDux USA, we are committed to fostering a diverse, equitable, and inclusive workplace. We believe that diversity in our workforce enhances creativity, innovation, and problem-solving. We strive to create an environment where every employee feels valued, respected, and empowered to bring their authentic selves to work. Equal Employment Opportunity (EEO) Statement CoreDux USA is an Equal Opportunity Employer. We do not discriminate on the basis of race, color, religion, sex (including pregnancy, childbirth, breastfeeding, and related medical conditions), gender, gender identity, gender expression, sexual orientation, marital status, national origin, ancestry, citizenship status, age, physical or mental disability, medical condition, genetic information, military or veteran status, or any other characteristic protected by applicable federal, state, or local laws. We are dedicated to providing reasonable accommodations for qualified individuals with disabilities and disabled veterans in our job application procedures. Benefits: · 401(k) · Dental insurance · Employee assistance program · Flexible spending account · Health insurance · Health savings account · Life insurance · Vision insurance · Long Term Disability Benefits · Short Term Disability Benefits · Paid Time Off · Birthday Lunches · Company Paid Holidays · School Visitation Leave · Leave for Organ / Bone Marrow Donor Recruiters and Staffing Agencies Thank you for your interest in our job opening, but we are not engaging recruiters for this position and will not respond to recruiter / agency inquiries. Requirements:

Job Description Company Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is an industry leader, providing engineering and industrial services to the U.S. Navy, U.S. Coast Guard, Military Sealift Command, and other DoD organizations. At Continental Tide, we understand that a great company culture is one where employees know their voice is heard, no matter what their title is, and letting them grow in their role as the company does. We want to provide our employees with the opportunity to learn, be challenged and be in a position where they can succeed, develop new skills, and do things they wouldn't have the opportunity to do elsewhere. In our fast-paced and challenging environment, employees here at Continental Tide can catapult themselves to the top and we're looking for 'the best at what they do' to join our team and help us grow. Job Description: Continental Tide is seeking a motivated and energetic Project Lead / Site Foreman with AIT (Alteration Installation Team) experience to support ongoing operations in San Diego, CA. The ideal candidate will make an immediate positive impact by leading technical teams, ensuring quality project execution, and serving as a critical link between senior leadership and the project workforce. Essential duties & responsibilities include, but are not limited to the following: \n • \nProject Planning and Execution: Lead and oversee the planning, execution, and delivery of shipboard HM&E or electronic system projects, ensuring adherence to quality, budget, and timeline requirements.\n, • \nTechnical Expertise: Apply in-depth working knowledge of power generation, power transmission, and auxiliary machinery systems to provide technical guidance and ensure project specifications are met.\n, • \nTeam Leadership: Lead cross-functional project teams, fostering a collaborative and results-driven work environment. Provide mentorship and support to team members as needed.\n, • \nQuality Assurance: Implement and oversee quality assurance processes to guarantee the delivery of high-quality ship systems.\n, • \nReporting: Prepare and present regular project status reports to senior management, highlighting key achievements, challenges, and upcoming milestones.\n\n Experience and Skills \n • High school diploma or equivalent; additional certifications or training in ship repair or a related field preferred.\n, • Proven experience as a Site Foreman or similar role in AIT ship repair.\n, • Knowledge of shipboard systems and equipment.\n, • Familiarity with safety regulations and practices.\n, • Ability to work in a fast-paced environment and manage multiple priorities.\n, • Willingness to travel and work in various locations as required.\n, • Targeted Five (5) to Seven (7) years previous experience overseeing and directing 'Project-Level' initiatives.\n, • Proven ability to lead a ten (10) to fifteen (15) tradesperson Alteration Installation Team (AIT).\n, • Experience in directing daily production to attain schedule milestones.\n, • Knowledge of maintaining QAWB and OQE requirements.\n, • Experience communicating directly with management, subcontractors, and customers regarding project cost, staffing, and scheduling.\n, • Background in preparing status reports and ensuring plans adhere to contract specifications.\n, • Knowledge of ship alteration/installation processes and procedures\n, • Must be eligible to obtain and maintain a DoD security clearance to access military facilities, naval shipyards, private shipyards, and Naval installations.\n, • Occasional Travel- up to 10% within and outside of the continental United States.\n, • Exposure to open-air environments.\n, • Required to visit project sites aboard ships and rigs, both onshore and offshore.\n, • Wear various types of personal protective equipment (PPE), (i.e. ear plugs, safety glasses, hard-hat, steel-toed boots, gloves) as required.\n, • Site visits may involve standing on a variety of surfaces and angles, bending, crouching, and climbing over obstructions such as scaffolding, ladders, and internal barge or boat structural components.\n, • Exposure to sound levels exceeding 100 decibels.\n, • Must possess sufficient visual acuity, peripheral vision, depth perception, and night vision to inspect marine components and systems, identify defects or irregularities, and safely operate tools and equipment.\n, • May work in confined spaces with limited ventilation.\n, • Require prolonged periods of sedentary work, including sitting and/or standing.\n, • May be required to operate machinery, power tools, and/or heavy equipment.\n, • Must be able to communicate effectively to exchange and comprehend information.\n, • Frequent exposure to extreme weather conditions, including high heat and extreme cold.\n To perform this job successfully, an individual must perform the essential job duties satisfactorily with or without reasonable accommodation and without posing a direct threat to the safety or health of employee or others. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Job Benefits Continental Tide offers an empowering professional environment in a culture that emphasizes teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Apply Today: If you're ready to make a difference, we encourage you to apply and become a part of our mission to deliver quality solutions to the Fleet. To be considered you must apply by going to See all of our latest opportunities at or follow us on our LinkedIn page at . Continental Tide is an Equal Opportunity Employer and participates in E-Verify and U.S. citizenship is required for most positions. Continental Tide prohibits discrimination against any protected class from discrimination on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. These protections extend to all management practices and decisions, including recruitment and hiring, appraisal systems, promotions, training, and career development programs. Consistent with these obligations, Continental Tide also provides reasonable accommodations to employees and applicants with disabilities; known limitations related to pregnancy, childbirth, or related medical conditions; and for sincerely held religious beliefs, observances, and practices. Continental Tides Defense Systems, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran". "This contractor and subcontractor shall abide by the requirements of 41 CFR 60-300.5(a). This regulation prohibits discrimination against qualified protected veterans and requires affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified protected veterans."

Epsilon Systems Solutions is seeking a full-time Marine Electrician II in Imperial Beach, CA. Summary: The Marine Electrician Technician will provide troubleshooting, maintenance, repair and material assessment of various types boat electrical systems and components in accordance with Navy guidance and OEM technical specifications in CONUS & OCONUS locations, as required. Roles and Responsibilities: \n • Uses technical knowledge and experience to troubleshoot and identify causes for equipment/system failure to the component level.\n, • Ability to perform services in accordance with applicable OEM tech manuals.\n, • Maintain and repair boat electrical systems and communications equipment to include but not limited to:\n, • Running lights\n, • Battery system\n, • GENTEX communication boxes\n, • UHF and VHF tactical communications equipment\n, • Satellite communications (SATCOM)\n, • 110A Alternators\n, • Battery Isolators\n, • Furuno radar displays and radome\n, • VIC 3 and VIC 5 Communications systems\n, • LINK 16\n, • H.S. Diploma or equivalent.\n\n, • Minimum of 5 years' general experience in their respective trade and at least 3 consecutive years of experience repairing and troubleshooting the aforementioned boat electrical systems and communication equipment.\n, • Familiarity with Navy Boat Information Book (BIB) and drawings.\n, • Comprehension & application of technical documentation - Manuals & drawings.\n, • Knowledge of proper use of diagnostic equipment.\n, • Possess basic computer skills with working knowledge of Microsoft Outlook, Word and Excel.\n, • Possess organizational skills.\n, • Possess effective oral and written communication.\n, • Ability to work in a team environment and be flexible.\n, • Ability to travel overseas when required.\n, • Possess or ability to obtain and maintain a secret clearance.\n, • Ability to obtain a US Passport.\n The pay range for this role is $26.07-$32.30 hourly. This is a reasonable estimate for this role. Individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Preferred Qualifications: • Prior military expeditionary equipment maintenance experience.\n ADA Notations: \n • Must be able to lift, carry and transport heavy equipment and boxes up to 50 lbs.\n, • Ability to work in a field environment for extended periods (and in some cases, areas of extreme heat and humidity such as Guam, Djibouti, Bahrain, etc).\n, • Ability to be able to work in maintenance shop environment\n, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions.\n, • Travel may be required within and outside of the continental United States.\n, • Job may require bending, stooping, lifting, and will be in an environment of low and high temperatures.\n\n Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Epsilon Systems Solutions, Inc. has an opportunity available for full time CESE Heavy Equipment Mechanic Technician II in San Diego, CA. Summary: The Heavy Equipment Mechanic Technician II will provide troubleshooting, maintenance, repair and material assessment of various types of Heavy Equipment mechanical systems and components in accordance with OEM technical specifications in CONUS & OCONUS locations, as required. Roles and Responsibilities \n • Uses technical knowledge and experience to troubleshoot and identify causes for equipment/system failure to the component level.\n, • Works from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform testing, checkout and trouble-shooting functions.\n, • Performs Lay-ups and related maintenance checks of Heavy Equipment in mid-level storage program.\n, • Performs Start-ups and related maintenance checks of Heavy Equipment in mid-level storage program.\n, • Provides written reports for all work accomplished and completed action documentation.\n, • Operates air brake equipped vehicles during the course of troubleshooting, maintenance and repair.\n, • Performs other duties as assigned in support of maintenance/repair as required.\n, • Travels oversees when required\n, • Maintains shop equipment.\n, • Ford Power Stroke Engine\n, • Chevy Duramax Engine\n, • Cummins Diesel Engines\n, • John Deere Engines\n, • Kubota Engines\n, • Mercedes Engines\n, • Caterpillar Diesel Engine\n, • Duramax Turbo Diesel Engine\n, • Allison Transmissions\n, • 4L80E Transmission\n, • 15KW and 45KW Generators\n, • IGET HVAC System\n, • Hydraulic Systems for 55 ton Lowboy Trailers\n, • High school diploma or equivalent\n, • Minimum two years of experience repairing and troubleshooting the aforementioned Heavy Equipment\n, • Ability to obtain and maintain a DoD secret security clearance.\n, • Knowledge of proper use of diagnostic equipment.\n, • Possess basic computer skills with working knowledge of Microsoft Outlook, Word and Excel.\n, • Possess effective oral and written communication.\n, • Have extensive knowledge of technical requirements.\n, • Ability to identify complex problems and solutions.\n, • Ability to work in a team environment and be flexible.\n, • Ability to travel overseas when required.\n, • Pursuant to the various government contractual requirements, all applicants must be U.S. Citizens.\n, • Possess a current and valid Passport.\n The pay range for this role is $31.28 - $33.57 hourly. This is a reasonable estimate for this role. Individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. ADA Notations: \n • Must be able to lift, carry and transport heavy equipment and boxes up to 50 lbs.\n, • Ability to work in a field environment for extended periods (and in some cases, areas of extreme heat and humidity such as Guam, Djibouti, Bahrain, etc).\n, • Ability to be able to work in maintenance shop environment\n, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions.\n, • Travel may be required within and outside of the continental United States.\n, • Job may require bending, stooping, lifting, and will be in an environment of low and high temperatures.\n\n Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Job Description Company Overview: Continental Tide Defense Systems Inc. (Continental Tide) is headquartered in Reading, PA with additional locations in Philadelphia; San Diego, CA; Bremerton, WA and Norfolk, VA. We specialize in providing engineering and industrial services to the US Navy, Coast Guard, Military Sealift Command, and other Department of Defense Organizations. At Continental Tide, we understand that a great company culture is one where employees know their voice is heard, no matter what their title is, and letting them grow in their role as the company does. We want to provide our employees with the opportunity to learn, be challenged and be in a position where they can succeed, develop new skills, and do things they wouldn't have the opportunity to do elsewhere. Our fast-paced and challenging environment, employees here at Continental Tide can catapult themselves to the top and we're looking for "the best at what they do" to join our team and help us grow in new ways. Strong attention to detail is essential as you will be fully engaged from the first day. We are always looking for top-talent and we look forward to new-thinkers and team-players joining our company! We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and a 401(k)-retirement plan with company match. Continental Tide is searching for skilled Marine Electricians for our Fleet Services Group - West. Candidates must possess a high school diploma, GED or industrial school certificate, a willingness to travel and a minimum of three (3) years of practical shipboard experience with HM&E systems and equipment. *Please note due to the anticipated volume of responses, we will contact only those candidates who most closely match our requirements. Only local candidates will be considered. Essential Duties & Responsibilities: \n • Practical shipboard experience with HM&E systems and equipment.\n, • Ability to troubleshoot and diagnose issues with shipboard electronic and electrical system and equipment.\n, • Understand and interpret electrical schematics and installation drawings.\n, • Experience with NAVSEA cableway and connectorization, certification is a plus.\n, • Technical expertise with power generation and transmission equipment, and motorized valve actuators.\n, • Programmable Logic Controllers (PLCs), fiber optics and integrated network system experience is preferred.\n\n Experience and Skills Requirements include: \n • Ability to read, interpret, and understand simple schematics and blueprints.\n, • Repair and replace cables and connectors.\n, • Work involves participating in the installation, maintenance of Combat Systems, PLCs, AC and DC generators, switchboards, distribution panels, lighting and alarm circuits.\n, • Troubleshoot, repair and install electronic and electronic equipment and cables.\n, • Applicant must be familiar with NAVSEA, standard concepts, practices, and procedures within the field of electrical repair, fabrication, and installation.\n, • Must have or have the ability to obtain a SECRET clearance and must be able to obtain DBIDS and be able to access local shipyards and US Navy bases.\n, • Must possess basic hand tools.\n, • Candidate must be able to walk, stand for long periods of time, sit, bend, stretch, reach, squat and twist.\n, • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs.\n, • Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces.\n, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels.\n, • Certified in "Multi-pin" Connectors IAW MIL-STD-20035A (SA) is a MUST.\n, • Certified in Fiber Optic: CFOS/O, CFOS/C, CFOS/S, CFOS/T, CFOS/FC is a PLUS.\n, • Minimum of three (3) years' experience as a marine electrician.\n, • Must be familiar with NAVSEA Standard Item requirements.\n, • Currently certified to accomplish wire way inspections in accordance with NAVSEA Standard Items.\n, • Microsoft Office knowledge is a plus.\n, • Pulling and splicing wires.\n, • Circuit Labeling.\n, • Circuiting testing and troubleshooting.\n\n Job Benefits Benefits: Continental Tide offers an empowering professional environment in a culture that stresses teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Continental Tides Defense Systems, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. See all of our latest opportunities at or follow us on our LinkedIn page at . To be considered you must apply by going to . "This contractor and subcontractor shall abide by the requirements of 41 CFR 60-300.5(a). This regulation prohibits discrimination against qualified protected veterans, and requires affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified protected veterans."

Job Description Company Overview: Continental Tide Defense Systems Inc. (Continental Tide) is headquartered in Reading, PA with additional locations in Philadelphia; San Diego, CA; Bremerton, WA and Norfolk, VA. We specialize in providing engineering and industrial services to the US Navy, Coast Guard, Military Sealift Command, and other Department of Defense Organizations. At Continental Tide, we understand that a great company culture is one where employees know their voice is heard, no matter what their title is, and letting them grow in their role as the company does. We want to provide our employees with the opportunity to learn, be challenged and be in a position where they can succeed, develop new skills, and do things they wouldn't have the opportunity to do elsewhere. Our fast-paced and challenging environment, employees here at Continental Tide can catapult themselves to the top and we're looking for "the best at what they do" to join our team and help us grow in new ways. Strong attention to detail is essential as you will be fully engaged from the first day. We are always looking for top-talent and we look forward to new-thinkers and team-players joining our company! We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and a 401(k)-retirement plan with company match. Continental Tide is searching for skilled Marine Electricians for our Fleet Services Group - West. Candidates must possess a high school diploma, GED or industrial school certificate, a willingness to travel and a minimum of three (3) years of practical shipboard experience with HM&E systems and equipment. *Please note due to the anticipated volume of responses, we will contact only those candidates who most closely match our requirements. Only local candidates will be considered. Essential Duties & Responsibilities: \n • Practical shipboard experience with HM&E systems and equipment.\n, • Ability to troubleshoot and diagnose issues with shipboard electronic and electrical system and equipment.\n, • Understand and interpret electrical schematics and installation drawings.\n, • Experience with NAVSEA cableway and connectorization, certification is a plus.\n, • Technical expertise with power generation and transmission equipment, and motorized valve actuators.\n, • Programmable Logic Controllers (PLCs), fiber optics and integrated network system experience is preferred.\n\n Experience and Skills Requirements include: \n • Ability to read, interpret, and understand simple schematics and blueprints.\n, • Repair and replace cables and connectors.\n, • Work involves participating in the installation, maintenance of Combat Systems, PLCs, AC and DC generators, switchboards, distribution panels, lighting and alarm circuits.\n, • Troubleshoot, repair and install electronic and electronic equipment and cables.\n, • Applicant must be familiar with NAVSEA, standard concepts, practices, and procedures within the field of electrical repair, fabrication, and installation.\n, • Must have or have the ability to obtain a SECRET clearance and must be able to obtain DBIDS and be able to access local shipyards and US Navy bases.\n, • Must possess basic hand tools.\n, • Candidate must be able to walk, stand for long periods of time, sit, bend, stretch, reach, squat and twist.\n, • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs.\n, • Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces.\n, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels.\n, • Certified in "Multi-pin" Connectors IAW MIL-STD-20035A (SA) is a MUST.\n, • Certified in Fiber Optic: CFOS/O, CFOS/C, CFOS/S, CFOS/T, CFOS/FC is a PLUS.\n, • Minimum of three (3) years' experience as a marine electrician.\n, • Must be familiar with NAVSEA Standard Item requirements.\n, • Currently certified to accomplish wire way inspections in accordance with NAVSEA Standard Items.\n, • Microsoft Office knowledge is a plus.\n, • Pulling and splicing wires.\n, • Circuit Labeling.\n, • Circuiting testing and troubleshooting.\n\n Job Benefits Benefits: Continental Tide offers an empowering professional environment in a culture that stresses teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Continental Tides Defense Systems, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. See all of our latest opportunities at or follow us on our LinkedIn page at . To be considered you must apply by going to . "This contractor and subcontractor shall abide by the requirements of 41 CFR 60-300.5(a). This regulation prohibits discrimination against qualified protected veterans, and requires affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified protected veterans."

Job DescriptionCompany Description At Konecranes, we believe that great customer experience is built on the people behind the Konecranes name. Everything we do, we do with passion and drive. We believe diversity drives business success and is the foundation for our growth. We welcome different backgrounds and skills that enrich our community, and we promote a place where we can ALL be ourselves. This is what makes Konecranes a unique place to work. Job Description JOB POSITION: Industrial Technician Are you interested in becoming an experienced Overhead Crane Service Technician? Join Konecranes, one of the world’s largest material handling companies. We're seeking skilled individuals with electrical and mechanical expertise, comfortable working at extreme heights. Our service technicians, the heart of our industry, thrive in a safety-first environment. You'll troubleshoot 480 3-phase motors, address crane issues, and collaborate with clients and facility directors to meet service needs across the United States. Principal Responsibilities: • Conduct inspections, maintenance, and repairs on electric overhead traveling cranes and hoists at customer locations., • Provide on-call service as part of a rotation, including after-hours support., • Troubleshoot electrical, mechanical, structural, and electronic issues on-site., • Perform post-repair audits to ensure safety features are functional., • Document findings and recommend corrective actions, including safety notifications to customers., • Consult with customers on repair and safety issues, offering recommendations for material handling improvement., • Produce electronic documentation using company tools, obtaining customer signatures., • Stay updated on industry codes and regulations (OSHA, ANSI, CMAA, HMI)., • Complete service reports and other required documents accurately and promptly., • Communicate with the Field Operations Manager and Service Coordinator following established practices, • Maintain company-issued equipment, vehicles, and assets in proper working order., • Operate tools, equipment, and vehicles, reporting deficiencies to the supervisor., • Follow established safety rules and procedures, including customer guidelines., • Participate in monthly safety meetings., • Perform other responsibilities as assigned by the supervisor. Qualifications Education: High School Diploma required. Associate degree in Industrial Electrical and/or Mechanical Technology or related field preferred or equivalent vocational/technical training and experience. Experience: Minimum one (1) year experience involving electrical troubleshooting and mechanical repair. Some electronic experience but not necessary. Prior experience with cranes is a benefit, but not required. Other Requirements: Must have and maintain a good driving record, including a valid driver's license. Must be willing to work off the ground. Can work varied overtime, as needed by customer, be available for "on call" as part of the service office rotation and be able to travel and work out of town, on occasion. Must be able to frequently lift to 25 lbs. Must be able to lift up to 50 lbs. on a daily basis. Must be able to lift to 75 lbs. although not on a daily basis. Must be able to lift 100 lbs. on a rare basis. This position requires frequent climbing, balancing, stooping/crouching, and overhead reaching. This position requires occasional pushing, pulling, kneeling, and crawling. This position will be inside approximately 90% of the time and outside approximately 10% of the time. This position will be frequently exposed to heat, cold, noise and heights. • This is a safety sensitive position., • *KCN Additional Information What we offer: Salary: $22 - $48 an hour - Pay is determined based on skills, geographic location, internal equity, market/data analysis, number of years of prior relevant experience, degrees and/or certifications, technical assessment score, etc. Company Vehicle: Our Service Technicians get a work truck and a gas card to be used for business purposes. Candidates must pass a Motor Vehicle Record (MVR) check. Benefits: Medical Plan, Dental, Vision, 401k plan with a match from day one, identity theft protection, accident insurance, travel insurance and so much more! Vacation: 2 weeks of vacation per year (pro-rated for the first year depending on start date). 5-12 years of service, 3 weeks. 13+ years of service, 4 weeks. Sick Leave: 5 days of Sick Leave per year. Pro-rated the first year after 90 days of service Holidays: 10 paid holidays per year Konecranes moves what matters. Konecranes is a global leader in material handling solutions, serving a broad range of customers across multiple industries. We consistently set the industry benchmark, from everyday improvements to the breakthroughs at moments that matter most, because we know we can always find a safer, more productive and sustainable way. That's why, with 16 000+ professionals in over 50 countries, we are trusted every day to lift, handle and move what the world needs. Konecranes is committed to ensuring that all employees and job applicants are treated fairly in an environment which is free from any form of discrimination. We are an Equal Opportunity Employer - Minorities/Women/Protected Veterans/Disabled/Other Protected Category. Konecranes, Inc. and its affiliates will not accept resumes from external recruiters or agencies without a Service Agreement and Agency Portal submission. Any resumes sent without a Service Agreement and Agency Portal submission with Konecranes, Inc. are void of any fees and free for internal use. Applicable Konecranes data protection obligations are the responsibility of the agency.

Requisition Number: 28242 Required Travel: 11 - 25% Employment Type: Full Time/Hourly/Non-Exempt Anticipated Salary Range: $49,289.00 - $55,120.00 Security Clearance: Ability to Obtain Level of Experience: Mid This opportunity resides with Global Security (GS). Mission Technologies' Global Security (GS) group comprises live, virtual, constructive (LVC) solutions; fleet sustainment; nuclear and environmental; and Australia business. As a trusted partner to our military customers, HII designs, develops and operates the largest LVC enterprise that prepares warfighters for cross-domain battle. With advanced technologies to enable mission readiness, HII understands that preparation requires full coordination-not readiness in piece-parts. For more than 40 years, the U.S. Navy has entrusted HII to maintain and modernize the vast majority of its fleet. With a holistic approach to life-cycle maritime defense systems-from small watercraft to submarines, surface combatants and aircraft carriers-HII ensures a high state of readiness. HII supports the Department of Energy's national security mission through the management and operation of its sites, as well as the safe cleanup of legacy waste across the country. HII meets clients' toughest nuclear and environmental challenges. Leadership Mindset at HII - Mission Technologies Leadership at HII is a mindset, not a title. Through our Leadership Capability Framework, we define how every team member contributes to our mission and culture: • \nKnow & Grow Your People - Commit to learning and supporting team success., • \nBuild Relationships - Communicate openly, collaborate well, and build trust., • \nTake Ownership - Deliver on commitments and take pride in your work., • \nCustomer First - Focus on the mission and those we serve., • \nShape the Future - Bring ideas, curiosity, and continuous improvement. Summary For over a century, HII has built and maintained the U.S. Navy's most powerful warships. Join us as we continue to maintain the Navy's readiness! We are seeking a Marine Electrician to serve on our SEMAT Combat Systems team located in San Diego, CA. This Marine Electrician will be responsible for performing maintenance and maintenance training to assist shipboard personnel in the operation, maintenance and repair of specific items of engineering systems/equipment onboard USN Surface Ships. *This role does not provide relocation assistance. What You Will Do • Master understanding of production and processes. Responsible for interfacing with customers, managing subcontractors and ability to provide work direction to others. May provide direction and lead others., • May manage one or more multiple jobs. Completes comprehension of specialty trades functions and tools. Performs a variety of complicated and non-routine tasks., • Develops and uses technical documents including controlled work packages, formal work processes and procedures, test documents, reports and task or trip reports., • Schedules, reports and briefs customers and senior management. May perform quality inspections on finished product. Performs duties outside of specialty in order to complete installation or work assignment., • Will be required to assist Ship's Force personnel with troubleshooting electrical and electronic components to determine all problems and assist with restoring Combat Systems equipment.\n What You Must Have • High School education, or Trade School or equivalent, and 4 years of related experience., • Must be able to obtain and maintain a DoD security clearance., • Must have experience as a shipboard electrician/electronics trades specialty with 4 or more years of shipboard maintenance and repair experience., • Must be able to read and interpret equipment and systems ship drawings and ship technical documents and manuals., • Must be competent in the use of shipboard electrical equipment and tools in corrective repair efforts in order to accomplish ship repairs., • Must provide own hand tools as designated per trades specialty., • Must be physically able to climb and work on ships in an industrial environment., • Start date contingent upon approved DBIDS for base access, which is required for this position and continued employment.\n Bonus Points For • Recent Marine Electrical/Electronic shipboard experience on USN ships., • Prefer former ET/IC/FC Navy ratings with shipboard troubleshooting and repair experience., • Prefer Fiber Optic and copper/connector wiring technical/professional certifications., • NAVSEA Cableway certification., • A current, valid DoD security clearance.\n Physical Requirements Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces. Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels. May ride ships at sea for extended periods. May require wearing a respirator. Travel may be required within and outside of the continental United States. The listed salary range for this role is intended as a good faith estimate based on the role's location, expectations, and responsibilities. When extending an offer, HII's Mission Technologies division takes a variety of factors into consideration which include, but are not limited to, the role's function and a candidate's education or training, work experience, and key skills. Meet HII's Mission Technologies Division Our team of more than 7,000 professionals worldwide delivers all-domain expertise and advanced technologies in service of mission partners across the globe. Mission Technologies is leading the next evolution of national defense - the data evolution - by accelerating a breadth of national security solutions for government and commercial customers. Our capabilities range from C5ISR, AI and Big Data, cyber operations and synthetic training environments to fleet sustainment, environmental remediation and the largest family of unmanned underwater vehicles in every class. Find the role that's right for you. Apply today. We look forward to meeting you. To learn more about Mission Technologies, click here for a short video: HII is more than a job - it's an opportunity to build a new future. We offer competitive benefits such as best-in-class medical, dental and vision plan choices; wellness resources; employee assistance programs; Savings Plan Options (401(k)); financial planning tools, life insurance; employee discounts; paid holidays and paid time off; tuition reimbursement; as well as early childhood and post-secondary education scholarships. Bonus/other non-recurrent compensation is occasionally offered for qualified positions, and if applicable to this role will be addressed by the recruiter at the screening phase of application. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. Our workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to [email protected] and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this email address. Additionally, you may also call 1-844-849-8463 for assistance. Press #3 for HII Mission Technologies.

Description SAIC is seeking a TACNET CB-ISEA Senior Network Engineer (Fleet Support) to join our team in San Diego, CA. This role is REMOTE but MUST BE LOCAL TO AREA due to on site needs. This position requires frequent and regular onsite support aboard U.S. Navy ships. The engineer will work directly with Active Duty personnel and government staff to deliver high‑quality repair and technical support for Navy afloat networks, including systems such as ADNS, ISNS, CANES, CENTRIXS, Legacy SCI, VIXS, and WRBS. Travel within the U.S. and internationally may be required (approx. 25%), along with occasional after‑hours support. JOB DUTIES: • Provide break/fix IT support in a fast‑paced shipboard environment and troubleshoot LAN issues to determine effective resolutions., • Perform root‑cause analysis and recommend permanent configuration or system changes when needed., • Collaborate with external partners, consultants, vendors, and government agencies to resolve inter-system issues and support integration efforts., • Deliver server and network break/fix support, including remote troubleshooting of servers, networks, desktops, and peripheral devices., • Advise and guide Navy customers on best practices for maintaining afloat networks and associated components supporting data, voice, and communication services., • Participate in technical meetings, prepare progress updates, and deliver briefs and presentations as needed., • Support engineering and design reviews through participation in integrated product teams. Qualifications REQUIREMENTS: • Bachelors and five (5) years or more experience; Masters and three (3) years or more experience. (An additional 8 years of experience may substitute for a Bachelor’s degree.)., • 6+ years of experience supporting military network environments relevant to the listed responsibilities., • Must be a U.S. Citizen., • Must have an Active Secret Clearance to Start., • Must be able to obtain a TS/SCI after start., • Administration experience with Cisco switches/routers, Windows Server, or Linux., • Working knowledge of core networking concepts and protocols., • Current DoD IAT Level II certification (e.g., CompTIA Security+)., • Experience designing, deploying, and maintaining enterprise‑scale networks (LAN/WAN/MAN/datacenter)., • Proficiency with enterprise wireless technologies (802.11 standards, controller-based systems, RF design, tuning, and modern security such as WPA3/802.1X)., • Knowledge of high‑availability architectures including HSRP/VRRP, redundant WAN edges, load balancing, and resilient datacenter fabrics., • Hands‑on experience with next‑generation firewalls, segmentation approaches, and zero‑trust architectures across large networks., • Experience supporting hybrid infrastructures integrating on‑prem networks with Azure, AWS, or GovCloud and secure identity integration., • Strong troubleshooting skills, including performing root‑cause analysis and developing corrective actions that minimize operational impact., • Ability to collaborate with customers, partners, and engineering teams to resolve high‑severity issues and represent the team in cross‑functional forums., • 2+ years of experience with IT ticketing systems such as HEAT, TrackIT, Magic, Remedy, Peregrine, or HELIX., • Experience supporting Microsoft Office and Windows OS in enterprise environments., • Familiarity with afloat Navy systems including CANES, ADNS, CENTRIXS, ISNS/ORT, ONE‑NET, SCI-Networks, SUB‑LAN, VIXS, WRBS, CND, and SCIP‑IWF. Target salary range: $80,001 - $120,000. The estimate displayed represents the typical salary range for this position based on experience and other factors.

Join Kyocera International, Inc. We're hiring a Maintenance Specialist 2 at our San Diego, CA facility! Salary Range: $20-27 per hour (Final offer based on experience, education, skills, and market factors) Why Kyocera? With nearly 80,000 employees worldwide, Kyocera is a global leader in advanced ceramic technologies used in aerospace, automotive, medical, and semiconductor industries. Our materials power everything from smartphones to space shuttles - and we're just getting started. What Makes Us Stand Out? We don't just offer jobs - we offer careers with purpose, stability, and growth. Here's what you can expect: Generous Time Off • 3 weeks of vacation to start (120 hours/year), • Competitive pay, • 401(k) with company match, • Employer-paid pension plan Comprehensive Health Coverage • Medical, dental, and vision insurance, • Life insurance, • Flexible Spending Account (FSA), • Tuition reimbursement, • Paid time off to volunteer, • Onsite gyms, walking tracks, and employee gardens at larger locations, • Long-tenured team (many with 30+ years of service!), • Inclusive and diverse workforce Ready to Make a Difference? Apply today and become part of a team that's shaping the future - one innovation at a time. Maintenance Specialist 2 (FR3284) Exempt: No Safety Sensitive: No GENERAL DESCRIPTION OF POSITION The Maintenance Specialist 2 acquires job skills and learns company policies and procedures to complete routine tasks. They perform a range of Maintenance duties in the building and plant. They support the facility team on projects to include but not limited to, mechanical, hydraulic, electric, and electronic devices. These assignments are performed under close supervision of the facility's supervisor/manager and normally follow established procedures on routine work and requires instructions only on new assignments. The Maintenance Specialist 2 works on assignments that are semi-routine in nature but recognizes the need for occasional deviation from accepted practice. They may work with outside vendors and will be closely involved in P5S activities. (Tasks listed are intended to be descriptive and not restrictive. An employee in this position may perform any of the tasks listed; however, these examples do not include all the tasks which an employee may be expected to perform.) ESSENTIAL DUTIES AND RESPONSIBILITIES • Reports directly to Maintenance Supervisor, may take direction from production management and/or Maintenance mechanic., • Troubleshoots all process and facilities related equipment regarding electrical, electronic, hydraulic, pneumatic, and mechanical problems., • Assists with all monthly maintenance for all production and facilities equipment when requested., • Maintains all office and administrative maintenance requests in SAP and Outlook., • Performs 5S activities as required daily, weekly, and monthly., • Works in cooperation with other Managers, Engineers, and departmental supervisors on ensuring all equipment is maintained and operational., • Reports any safety problem immediately., • Willingness and open to learn new tasks., • Willing to work on a variety of machines or lines. This position generally works standard business hours; however, additional hours, including weekends and holidays, may be required at times. All overtime will be paid in compliance with applicable California wage and hour laws. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty mentioned satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. PHYSICAL ACTIVITIES The following physical activities described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. While performing the functions of this job, the employee is continuously required to stand, use hands to finger, handle, or feel, reach with hands and arms, talk or hear; frequently required to walk; and occasionally required to sit, climb or balance, stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 100 pounds, regularly lift and/or move up to 10 pounds, regularly lift and/or move up to 25 pounds, regularly lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, and color vision. ENVIRONMENTAL CONDITIONS The following work environment characteristics described here are representative of those an employee encounters while performing essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the functions of this job, the employee is occasionally exposed to work near moving mechanical parts, work in high, precarious places, fumes or airborne particles, extreme heat, risk of electrical shock. The noise level in the work environment is usually moderate. ADDITIONAL INFORMATION The above statements are intended to describe the work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required. The duties and responsibilities of this position are subject to change and other duties may be assigned or removed at any time. This position may require exposure to information subject to US Export Control regulations, i.e.: the International Traffic and Arms Regulations (ITAR) or Export Administration Regulations (EAR). All applicants must be US persons within the meaning of US regulations. Kyocera International, Inc. values diversity in its workforce, and is proud to be an AAP/EEO employer. All qualified applicants will receive consideration for employment without regard to race, sex, color, religion, sexual orientation, gender identity, national origin, protected veteran status, or on the basis of disability. If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, or are limited in the ability or unable to access or use this online application process and need an alternative method for applying, you may contact Kyocera International, Inc. Human Resources team directly. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

La Jolla 9500 Gilman Drive, San Diego, CA 92037, United States Filing Deadline: Wed 4/29/2026 ___ UC San Diego values and welcomes people from all backgrounds. If you are interested in being part of our team, possess the needed licensure and certifications, and feel that you have most of the qualifications and/or transferable skills for a job opening, we strongly encourage you to apply. UCSD Layoff from Career Appointment: Apply by 4/20/2026 for consideration with preference for rehire. All layoff applicants should contact their Employment Advisor. Reassignment Applicants: Eligible Reassignment clients should contact their Disability Counselor for assistance. Perform skilled journey level work in preventative maintenance, repairs, installation and/or replacement of on-campus refrigeration, heating and air conditioning equipment and components such as, but not limited to: split or packaged air conditioning systems or water source heat pumps from 1/8 to 10 tons in size, multi-circuit water chiller units up to 150 tons in size, centrifugal chillers up to 300 tons in size, natural gas furnaces, water source heat pumps, walk-in freezers and environmental rooms. Perform troubleshooting and repair on attached electrical, electronic, pneumatic and plumbed devices and subsystems. Troubleshoot and repair/replace according to National Electric Code (NEC) and Campus standards all air conditioning and refrigeration related electrical issues including electrical distribution systems, lighting, breakers, step down transformers, solenoid valves, electric motors, digital and analog control systems, printed circuit boards and thermostats. Respond to Air Conditioning / Refrigeration (A/C&R) and General Electrical System trouble calls anywhere on campus and at several off-campus locations. Make quick analysis of mechanical and/or electrical problems through proper troubleshooting techniques and use of various test equipment, tools and schematics. Check, test, diagnose, install, maintain, upgrade, and/or repair/replace components to a wide variety of refrigeration and air conditioning equipment to ensure systems and equipment are operating properly. Use proper techniques in the mechanical preservation and preventative maintenance of quality of output for A/C&R equipment and systems. Incumbents install, repair, calibrate and/or program control devices operating campus Air Conditioning, Refrigeration, & Heating (A/C-R & H) machinery. Incumbents safely work in confined spaces such as overheads and mechanical spaces and work safely on and around electrical equipment including exposed conductors and wiring in voltages from 24VAC to 460VAC. Follow established safety procedures. Act as on-site expert resource for outside contractors performing work as directed by Facilities Management (FM). Review contractor proposals and assist FM management in development of job scope documentation for the renewal, replacement, and/or upgrade of UCSD air conditioning and refrigeration equipment when needed. Use various types of techniques and materials to repair leaks in water and refrigerant lines. Effectively work with campus customers and co-workers to accomplish work with a high level of quality and efficiency. * Substantial skilled journey-level knowledge and experience in the installation, troubleshooting, service, repair and preventative maintenance of refrigeration and air conditioning systems, equipment, instrumentation and control systems. * Thorough practical and analytical knowledge and understanding of all types of refrigeration and air conditioning systems including: packaged or split air conditioning and water or air-cooled heat pump systems up to 20 tons in size, multi-circuit water chillers up to 150 tons in size, and air and/or water-cooled refrigeration systems up to 4 tons in size. * Experience with and thorough knowledge of refrigeration cycle including principles of heat transfer, superheat, subcooling, pressure/temperature relationships, and their effect on refrigeration systems. In depth knowledge of component use and functions including; compressors, heat exchangers, expansion devices, refrigerant pressure regulating valves, water regulating valves, refrigerant filter/dryers, packless refrigerant valves and solenoid valves. * Experience working within EPA regulations and laws pertaining to management of refrigerants such as: R-12, R-22, R-404A, R-410A, FR-12 (R-416A) and R-134A. Must have in-depth knowledge of refrigerant charging, recovery and evacuation requirements, techniques and procedures, use of refrigerant recovery equipment, and refrigerant tracking software. * Demonstrated ability to safely solder or braze component parts using acetylene, oxygen/acetylene, mapp gas or propane torches. Ability to make 100% leak tight joints on components such as: packless refrigeration valves, solenoid valves, TXV's, pressure switches, reversing valves, diaphragm type valve, compressors, etc., without destroying the integrity of the component. Ability to successfully braze dissimilar metals such as brass/copper, steel/copper. * In-depth knowledge of electrical theory, phasing and wiring as it applies to the refrigeration trade in voltages from 24VAC to 460VAC including but not limited to: single and three phase circuits, motors, and controllers. Demonstrated ability to troubleshoot electrical systems to the component level and service, repair or replace electrical components including motors, breakers, disconnects, transformers, contactors, relays, starters, capacitors, overloads, pressure switches, thermostats, defrost and lighting timers, circuit boards, lighting ballasts and GFCI receptacles. Proficiency in the use of electrical diagnostic tools such as meggers and multi-meters. * Ability to use wiring diagrams, As-Built drawings, and building plan archives to help diagnose and repair electrical and mechanical utility issues related to the function of the installed refrigeration and air conditioning systems and equipment. * Ability to work effectively in a service-oriented environment subject to frequently changing priorities. * Excellent interpersonal and communication skills, self-motivation, adaptability, tactfulness and decisiveness. * Must possess and maintain Environmental Protection Agency (EPA) TYPE I and TYPE II Certification. * Required to work overtime as needs demand. * Must possess and maintain a valid California Driver License. * Required to hold valid driver's license, have a driving record that is in accordance with local policies/procedures, and/or enroll in the California Employer Pull Notice Program. * DOJ/FBI background and DMV checks and clearances required prior to hire. * Ability to work in or around morgues, gross anatomy and pathological laboratories where human and animal bodies or parts thereof may be exposed to view of worker. Pay Transparency Act Annual Full Pay Range: $105,841 - $105,841 (will be prorated if the appointment percentage is less than 100%) Hourly Equivalent: $50.69 - $50.69 Factors in determining the appropriate compensation for a role include experience, skills, knowledge, abilities, education, licensure and certifications, and other business and organizational needs. The Hiring Pay Scale referenced in the job posting is the budgeted salary or hourly range that the University reasonably expects to pay for this position. The Annual Full Pay Range may be broader than what the University anticipates to pay for this position, based on internal equity, budget, and collective bargaining agreements (when applicable). If employed by the University of California, you will be required to comply with our Policy on Vaccination Programs, which may be amended or revised from time to time. Federal, state, or local public health directives may impose additional requirements. To foster the best possible working and learning environment, UC San Diego strives to cultivate a rich and diverse environment, inclusive and supportive of all students, faculty, staff and visitors. For more information, please visit ___. The University of California is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, protected veteran status, or other protected status under state or federal law. For the University of California's Anti-Discrimination Policy, please visit: ___ UC San Diego is a smoke and tobacco free environment. Please visit ___ for more information. Misconduct Disclosure Requirement: As a condition of employment, the final candidate who accepts an offer of employment will be required to disclose if they have been subject to any final administrative or judicial decisions within the last seven years determining that they committed any misconduct; or have filed an appeal of a finding of substantiated misconduct with a previous employer. a. "Misconduct" means any violation of the policies governing employee conduct at the applicant's previous place of employment, including, but not limited to, violations of policies prohibiting sexual harassment, sexual assault, or other forms of harassment, or discrimination, as defined by the employer. For reference, below are UC's policies addressing some forms of misconduct:

Why Join Our Team? At Vallen, we embrace what makes us unique. We thrive on the diversity of our associates and the different ways each of us contributes to Vallen's success. We pride ourselves on being an inclusive company that values the growth of our associates. When you join Vallen, you become part of our winning team. Our vast network of connections is here to help you transform your job into a career. Vallen is an industry leader in delivering flexible supply chain solutions while creating value for our customers, our supply partners, and our associates. Benefits at Vallen • Medical, Dental, and Vision Insurance, • Medical, Dental, and Vision Insurance for Single, Employee + Spouse or Children, and Family Coverage, • 401(k) with discretionary company match of $0.50 on the $1.00 up to 6% of pay (U.S. positions only), • Employer-paid Basic Life Insurance for Employee, Spouse, and Dependents, • Employer-paid Short-Term and Long-Term Disability Benefits and Parental Leave (and any leave required under federal, state, and local laws), • Health Care and Dependent Care Flexible Spending Accounts, • Paid Time Off (Vacation and Sick Days): 80-160 hours of vacation time based on seniority, accrued monthly and prorated from date of hire. 40-56 hours of sick time per year based on seniority and advanced upon hire., • Paid Time Off (Holidays): 8 scheduled holidays plus 2 floating holidays, • Employee Assistance Program, • Employee Resource Groups for networking and team building, • Tuition Reimbursement Program, • Employee Referral Program, • Safety shoe and safety glasses reimbursement (based on position), • Employee discounts through BenefitHub, • Advancement opportunities, • Vallen complies with all minimum wage laws Join our exciting & dedicated team at Vallen as a Customer Service Representative (CSR). In this position, you will work at a customer location and are responsible for providing exceptional service to Vallen's customers by purchasing products, goods, and materials that meet the organization's exceptional standards of price, quality, timing, and reliability of supply. Essential Job Duties and Responsibilities: • Perform procurement activities to ensure the customer's current and anticipated demand for products and materials (stock and/or non-stock, or spot buy) are met and in alignment with Vallen's purchasing strategies., • Assess existing orders to determine action for expediting or de-expediting for optimal delivery., • Place purchase requisitions and vendor purchase orders., • Research, assess, and make recommendations for vendors and/or specific items of request to ensure they comply with specifications and meet the customer's quality, pricing, and delivery standards., • Monitor the quality and timeliness of products and materials supplied; may coordinate the return of damaged goods and/or replacement items., • Follow-up on the status of purchase orders with vendors to ensure timely delivery; and communicate status of orders with customers., • Communicate with vendors to resolve problems with timeliness and product quality., • Maintain and cultivate relationships with one or more suppliers, vendors, and assigned customers., • Research and resolve account payables nonconformance with suppliers., • Identify opportunities for and document customer cost savings., • Follow all Vallen and customer Standard Operating Procedures., • Adhere to operating practices; ensure worksite is professional, clean and neat always., • High school diploma or equivalent. 1+ years of experience in the field of Procurement preferred., • Excellent customer service., • Computer skills and aptitude to learn the various Enterprise Resource Planning (ERP) and Inventory Management applications., • Self-starter with the ability to work independently., • Strong attention to detail and accuracy., • Demonstrated strong attention to detail, organizational and execution skills., • Proficiency with MS-Office products., • Strong verbal and written communication skills., • Long periods of time working on a computer and performing repetitive key-boarding activities., • Work may be in a manufacturing environment and could have exposure to dirt, smoke, heat, cold, etc., • Safety protection may be required while in the customer's facility (hand, foot, and eye or other as dictated by the customer's safety protocols)., • Overtime hours may be required with little advanced notice. Stay up to date with Vallen, and follow us on ___, ___ and ___. Equal Opportunity Employer - Ethnically and Culturally Diverse/Females/Veterans/Disabled/Sexual Orientation/Gender Identity

Scripps Institution of Oceanography 8622 Kennel Way, San Diego, CA 92037, United States Filing Deadline: Fri 5/8/2026 ___ UC San Diego values and welcomes people from all backgrounds. If you are interested in being part of our team, possess the needed licensure and certifications, and feel that you have most of the qualifications and/or transferable skills for a job opening, we strongly encourage you to apply. This is a UC San Diego Internal Recruitment open to UC San Diego Career Employees Only The R&D Engineer applies professional engineering principles to support the design, preparation, deployment, operation, and maintenance of specialized hydrometeorological observing systems. Under general supervision, the incumbent supports the implementation of observational infrastructure by assisting with integration of sensors and data loggers, testing of components, and field deployment activities. Responsibilities include routine and corrective maintenance of existing stations, troubleshooting equipment and communications issues, and supporting analysis of station data. Assignments require the application of engineering judgment and technical problem-solving across a range of field situations, with guidance provided for novel or complex challenges. The R&D Engineer 2 is expected to remain current with relevant field technologies and instrumentation used in hydrometeorological monitoring and to contribute constructively to team discussions on operational improvements. The engineer follows established design standards, protocols, and procedures, contributing to documentation related to station configuration, installation methods, and maintenance practices. The R&D Engineer 2 collaborates with senior engineers and researchers to implement observational plans and provides day-to-day technical guidance to junior staff, interns, and graduate students during laboratory and field activities. The R&D Engineer supports multiple projects simultaneously, adapting to changing field conditions, access constraints, and operational priorities. The role emphasizes dependable execution, collaboration, and technical proficiency * Working knowledge of engineering principles and methods in order to independently perform professional engineering design work of limited scope and complexity. Demonstrated knowledge and experience in materials selection, fabrication techniques, procurement procedures, assembly techniques, testing, troubleshooting, and calibration methods used in hydrometeorological instrument development and production. * Working knowledge necessary to begin independent application of principles, practices and procedures in the completion of assignments. Knowledge of hydrological measurement principles for streamflow, soil moisture, and other parameters. Demonstrated ability to develop new methods for scientific investigation and to translate data information requirements to hardware capable of collecting such information. * Knowledge of Matlab, Python, BASIC, or similar programming languages and ability to quickly become conversant in a variety of languages. * Experience in planning and performing laboratory work and fieldwork necessary to meet project objectives in a safe manner including when traveling with hazardous materials, in adverse conditions such as travel within mountain regions at high altitudes, travel to wet and dry regions; travel in extreme weather including extreme heat, extreme cold and extreme wet; travel in vulnerable areas during wildfire season; and travel to remote mountain areas in all seasons * Ability to read schematics, solder, operate equipment to test electronics. * Ability to work with various 3rd party sensors and data acquisition systems. * Experience with both PC and Unix operating systems. Ability to work with various operating systems and computer architectures. * Demonstrated experience of laboratory, shop, and fieldwork safety procedures. * Organizational abilities and decision-making to prioritize work assignments. Strong project management skills and ability to adhere to project timelines and deliverables. Demonstrated ability to adapt team tasks in response to changing priorities and deadlines in the laboratory and in the field. * Ability to work in a collaborative manner, to assist in identifying any challenges or barriers. Demonstrated experience in leading teams, identifying challenges, and implementing solutions * Strong analytical skills and attention to detail. * Demonstrated ability to use independent judgment and make responsible and safety-conscious decisions in the lab and in the field. Proven ability to work in ambiguous conditions and take relevant responsible action as required. * Proven ability to develop and maintain strategic relationships and partnerships with remote stakeholders and partners * Ability to operate instrument systems and laboratory test equipment. * Excellent interpersonal communication skills including thoughtfulness, diplomacy and flexibility with students, staff, faculty, collaborators, stakeholders, communities, and partners from diverse backgrounds and cultures. * Job offer is contingent upon satisfactory clearance based on Background Check results. * Must be willing to go in the field for up to two months per year for periods of up to three weeks throughout the year. Evenings and weekends and irregular hours may be required. * Must be willing to work with hazardous materials. * Must be able to work under adverse conditions and perform fieldwork in variable terrain. * Must be willing to perform fieldwork in variable terrain using rugged 4WD vehicles. * Must be able to use ladders, climb stairs, and be able to lift up to 60 pounds. * Will be required to hold valid driver's license and have a driving record that is in accordance with local policies/procedures. Pay Transparency Act Annual Full Pay Range: Unclassified - No data available (will be prorated if the appointment percentage is less than 100%) Hourly Equivalent: Unclassified - No data available Factors in determining the appropriate compensation for a role include experience, skills, knowledge, abilities, education, licensure and certifications, and other business and organizational needs. The Hiring Pay Scale referenced in the job posting is the budgeted salary or hourly range that the University reasonably expects to pay for this position. The Annual Full Pay Range may be broader than what the University anticipates to pay for this position, based on internal equity, budget, and collective bargaining agreements (when applicable). If employed by the University of California, you will be required to comply with our Policy on Vaccination Programs, which may be amended or revised from time to time. Federal, state, or local public health directives may impose additional requirements. To foster the best possible working and learning environment, UC San Diego strives to cultivate a rich and diverse environment, inclusive and supportive of all students, faculty, staff and visitors. For more information, please visit ___. The University of California is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, protected veteran status, or other protected status under state or federal law. For the University of California's Anti-Discrimination Policy, please visit: ___ UC San Diego is a smoke and tobacco free environment. Please visit ___ for more information. Misconduct Disclosure Requirement: As a condition of employment, the final candidate who accepts an offer of employment will be required to disclose if they have been subject to any final administrative or judicial decisions within the last seven years determining that they committed any misconduct; or have filed an appeal of a finding of substantiated misconduct with a previous employer. a. "Misconduct" means any violation of the policies governing employee conduct at the applicant's previous place of employment, including, but not limited to, violations of policies prohibiting sexual harassment, sexual assault, or other forms of harassment, or discrimination, as defined by the employer. For reference, below are UC's policies addressing some forms of misconduct:

Job Description Job Description COMPENSATION: Pay Rate: $23.00–$25.00 per hour This represents the good faith estimate of the hourly wage range we reasonably expect to pay for this position upon hire, depending on factors such as the selected candidate's experience, training, education, job-related skills, internal equity, and operational needs. In select cases, and depending on market conditions or exceptional candidate qualifications, compensation may exceed this range, provided it aligns with applicable law and our compensation policies. Additional information about our compensation scales is available at: SUMMARY: Supervises a staff of dishwashers. Assumes dishwashing responsibilities for all Back of House (BOH) areas. Responsible for all aspects of daily cleaning in the kitchens and catering events. Carries out supervisory responsibilities in accordance with the organization’s policies and applicable laws. Responsibilities include washing dishes, taking out trash, deep cleaning equipment in the kitchens and other food and beverage areas, cleaning of walk-in areas and floors and other duties as assigned, interviewing, hiring, training employees and inventory. ESSENTIAL DUTIES AND RESPONSIBILITIES DEPENDING ON LOCATION: NOTE: The duties listed below are examples of the variety and general nature of those performed by employees in this job description. The list is descriptive only and should not be used for any other purpose. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. This is not an all-encompassing list and additional duties may be assigned based on business needs. The responsibilities listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Ensuring all ware washing equipment is in working order * Maintaining cleanliness in all back of the house areas including kitchens and walk-ins * Help with delivery of food for banquet events and breakdown stations for the conclusion of events * Driving and maintaining the kitchen recycling program * Guides stewarding activities so as to provide for smooth, efficient, cost-effective operation of stewarding operation to include labor management, supervision of all aspects of work performed, inventory control * Communicates daily with Chef and Catering Operations Manager to obtain/provide information regarding current status of daily activities/functions and upcoming events * Maintains control over food and beverage porcelain, glass, silver, cookware, and service equipment inventories * Prepares department storeroom/purchase requisitions, ensures that operational cost is kept within forecasted budgetary guidelines * Reviews daily payroll report, maintaining labor cost within established budgetary limits * Must comply with and ensure continued, consistent compliance with all company policies, and federal, state, and local laws/regulations including but not limited to: employment, safety, and health. * Other duties as assigned. Job Requirements MINIMUM EDUCATION, TRAINING AND EXPERIENCE REQUIRED: The minimum requirement for applicants is a High School Diploma or a General Education Development (GED) degree; equivalent level of education and experience. At least two years as a Food & Beverage Supervisory experience required. Stewarding or kitchen related experience strongly preferred. Must possess basic computer skills. Knowledge of health codes as they apply to food preparation. Strong knowledge of soaps, chemicals, sanitation techniques and ware washing procedures. Ability to train staff in all specific areas of stewarding. Food Handler’s certificate from the County of San Diego is preferred. This position may involve operating a company vehicle and/or golf cart on university or company property. As such, candidates must have a valid driver’s license and have not been issued more than three moving violations or have been responsible for more than three accidents (or any combination of more than three thereof during the past 12-month period). Applicants must be at least 18 years of age and will be required to provide proof of driving eligibility upon hire. MINIMUM QUALIFICATIONS OR STANDARDS REQUIRED TO PERFORM ESSENTIAL JOB FUNCTIONS LANGUAGE SKILLS: Must be able to read, write and understand English. Second language in Spanish is helpful but not required. Requires the ability to follow verbal and written instructions, guidelines, and objectives. Requires the ability to effectively and respectfully present information one-on-one, small, and large group situations to customers, management, and employees of the organization. MATHEMATICAL SKILLS: Requires the ability to apply basic math concepts; calculating figures and amounts such as discounts, portions, percentages, and volume. REASONING ABILITY: Requires the ability to carry out general written or oral instructions. Must be able to multitask, prioritize work and pay attention to detail. MANUAL DEXTERITY: Must be able to utilize a computer. Requires the ability to use a variety of office machines and equipment. PHYSICAL COMMUNICATION: Must have the ability to talk/expressing and/or exchanging ideas and hear/perceiving sounds. PHYSICAL DEMANDS: Must be able to lift up to 50 lbs unassisted on a regular and continuing basis. Must be able to push and pull carts and equipment weighing up to 100lbs assisted. Must be able to bend, stoop, squat and stretch to fulfill cleaning/inspection tasks. Requires grasping, writing, standing, sitting, walking/moving, repetitive motions, bending and climbing. WORKING CONDITIONS AND HAZARDS Work is regularly performed in a loud dish room area. Will be exposed to hot and cold water. There may be exposure to loud noises, food fumes, chemical fumes, or airborne particles. The employee typically works inside a kitchen environment and can be exposed to extreme heat or extreme cold. Will occasionally work near moving mechanical parts and may be exposed to humid and hot conditions as well as cleaning chemicals. This position requires on-site presence due to the scope of the duties, and it would not be eligible for remote work. SUPPLEMENTAL INFORMATION: Candidates must be available to work a flexible schedule based on operational needs. This may include opening, mid-day, and closing shifts, as well as night shifts, weekends, and holidays throughout the year. BACKGROUND CHECK INFORMATION: A background check will be conducted after a conditional offer of employment is extended by the company and accepted by the applicant and must be satisfactorily completed prior to any applicant beginning work in a full-time, part-time non-student, or sensitive student capacity with Aztec Shops Ltd. Background checks will include, at minimum, verification of education and employment histories, criminal records, national sex offender registry check, and references. Additionally, based on the nature and scope of the position, the background check may also include a credit report, motor vehicle report, and verification of professional licenses. Failure to answer background check questions honestly, and satisfactorily complete the background check may affect the employment status of applicants or continued employment of current Aztec Shops employees who apply for promotional positions which require a background check. Aztec Shops Ltd. complies with all applicable federal, state and local laws, including California Fair Chance Act, when conducting background checks. Aztec Shops will consider qualified applicants with a criminal history pursuant to the California Fair Chance Act. You do not need to disclose your criminal history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Aztec Shops is concerned about criminal history that is directly related to the job, you will be given notice and an opportunity to respond and provide additional information such as rehabilitation efforts or mitigating circumstances, or information pertaining to the accuracy of the background report. Aztec Shops will consider all evidence of rehabilitation and mitigating circumstances. Find out more about the Fair Chance Act by visiting the Civil Rights Department Fair Chance Act webpage. Aztec Shops is a diverse community representing many perspectives, beliefs, and identities. We are committed to fostering an inclusive, respectful culture that promotes open communication, mutual respect, and a sense of belonging, to support the success of both our employees and students. All Aztec Shops programs and activities are open and accessible to all individuals, regardless of race, sex, color, ethnicity, or national origin, and other characteristics protected by law. Consistent with California and federal civil rights laws, Aztec Shops maintains a Nondiscrimination Policy that prohibits discriminatory preferential treatment, segregation, and all forms of unlawful discrimination, harassment, and retaliation in all programs, policies, and practices. Aztec Shops is dedicated to providing equal opportunity in employment and ensuring that no employee or applicant faces unlawful discrimination or preferential treatment based on race, sex, color, ethnicity, national origin or any other characteristic protected by law. This commitment applies to all aspects of employment, including but not limited to recruitment, hiring, promotion, compensation, benefits, training, job assignments, disciplinary actions, and terminations. Our commitment to equal opportunity ensures that every employee has access to the resources and support needed to thrive and succeed. Aztec Shops complies with Title VII of the Civil Rights Act of 1964, the Americans with Disabilities Act (ADA), Section 504 of the Rehabilitation Act, and other applicable state and federal anti-discrimination laws. For additional information about the SDSU campus policy please visit Affirming Equal Opportunity.

Job DescriptionDescription: Job Purpose Summary Prepare and keep all food products fresh and at proper temperature, according to Rubio’s guidelines. Maintain cleanliness in support of a productive and profitable restaurant, including product quality and presentation, portion control, speed and efficiency, and cleanliness. The Line Cook is seen as ‘the leader in the kitchen.’ S/he is supportive of the Management team for the Back-of-House Team by example and with integrity. Is personally accountable for following the C.O.R.E. 10. Essential Job Duties • Responsible for product quality and presentation. Properly prepares and holds products. Ensures products are dated, stored and rotated as needed., • Manages portion control. Restocks designated cook area. Counts and/or weighs delivered items. Works within established inventory and cost controls. Follows recipe and product item builds., • Works with speed and efficiency. Reads tickets and/or listens for direction to determine proper amount of food to prepare. Meets or exceeds Rubio’s service time standards., • Keeps the restaurant clean and maintains restaurant facilities as needed and/or directed by Management. Maintains personal hygiene as prescribed by law and Rubio’s Dress Code standards., • Follows all Company safety and security policies and procedures. Maintains proper temperature of food product. Complies with health code regulations, including but not limited to hairnet and glove usage., • Communicates effectively with the Team in order to ensure good operations in the back-of-house (BOH.) Performs similar and incidental duties as required. Requirements: Job Qualifications Education: High school degree or equivalent combination of education and experience preferred. Experience: Restaurant experience required. Previous kitchen experience preferred. Knowledge: Knowledge of all aspects in the restaurant industry. Ability to quickly make and execute decisions regarding food quality, quantity needed, and when to clean. Language Skills: Must be able to read and write in either English (abbreviations, kitchen tickets, job aids.) Ability to clearly communicate operational concerns with Management and co-workers. Bi-lingual Spanish a plus. Math Skills: Overall skills and knowledge of mathematical principles and practices. Ability to count, and perform simple mathematical calculations. Other: Ability to follow direction from Management, as well as provide direction to Back-of-House (BOH) Team. Requires assisting coworkers in other tasks or positions. Must have reliable transportation to arrive to work on time. Other Abilities: Ability to maintain a high level of patience with others and remain calm in stressful situations. Requires working closely with co-workers for long periods of time. Ability to provide leadership and foster a team environment. Ability to handle multiple priorities. Requires a high-level of concentration and attention to detail for extended periods of time to prepare food items and to maintain cleanliness standards. Reporting Relationships Reports to the General Manager, Assistant Manager and/or Shift Leader Major Business/Professional Contacts The Line 1/2 will have constant contact with Guests, managers (including shift leaders,) restaurant Team Members, and occasional contact with Restaurant Support Center staff. It is necessary for this person to conduct these relationships with professionalism and cooperation for the betterment of the Company. The Line 1/2 will regularly give suggestions to his/her managers regarding operations. The Line 1/2 is expected to follow the chain of command with respect to all communications (General Manager, District Manager, People Services Business Partner, and Regional Director.) Working and Environmental Conditions Works indoors and outdoors (for events, or to take trash to the dumpster.) Constant exposure to fumes from restaurant, food preparation equipment, and cleaning solvents (ex. flour dust, cooking fumes and gases.) Constant fluctuation in temperature and conditions (ex. heat, cold, humidity) due to movement from one cook area to another. Some noise and vibration exposure. If working an event, may work outdoors in varying temperatures and in different environments such as golf courses and beaches. If assisting with a delivery, may help carry food in catering bags to Guest’s cars or may be asked to make a delivery in own vehicle (only if approved to drive in advance with signed Driver Policy on file.) Physical Demands Must have the ability to lift 55 lbs. Requires standing for long periods of time. Performs fine hand manipulation during food preparation. Must be able to reach 5’6” minimum. Flexible hours, night and day, weekends and holidays. Ability to operate all kitchen-related tools and equipment, such as the dishwasher, food drill, fryer, rice cooker, etc. Must be able to taste food (including, but not limited to, seafood, chicken, and steak) to ensure the flavor profile and quality standards are met. Tools and Equipment Used Fryer, grills, knives, refrigerators (including walk-in refrigerator,) steam table, condiment table, microwave oven, stove, dishwasher, cleaning supplies & equipment (towels, broom, dust pans, mops, etc.,) cleaning solvents (bleach, cleanser, window cleaner, etc.,) kitchen supplies and utensils (prep safety glove, food totes, stock pots, tongs, spatulas, cutting boards, etc.,) and food processing equipment (food drill, etc.)

Job DescriptionDescription: POSITION SUMMARY The Facilities Technician I performs a broad range of facility maintenance, repair, and support activities to keep the facility safe, clean, functional, and compliant. This role handles general building systems and infrastructure while developing foundational knowledge in preventive maintenance, production equipment support, and life-safety systems. The Facilities Technician I works under the direction of the Facilities Manager and collaborates closely with operations, environmental health and safety, and other internal teams. ESSENTIAL JOB FUNCTIONS The following duties represent the primary responsibilities of this role. Other duties may be assigned as needed in support of the department and the company. • Log, create, and track work orders in the Computerized Maintenance Management System (CMMS); maintain accurate and up-to-date records for all facility-related activities., • Research parts, materials, and vendor options to support facility maintenance and repair needs; coordinate with purchasing to ensure adequate supply levels for janitorial and other facility services., • Manage spare parts inventory, including receiving, organizing, and tracking stock to support ongoing maintenance activities., • Perform general facility maintenance and repairs on buildings and infrastructure, including drywall, plumbing, basic electrical, and pneumatic systems., • Maintain the grounds in a clean and organized condition; keep trash and plastics off the ground and in designated waste containers., • Ensure facility and storage areas are clean, organized, and compliant with applicable safety standards., • Maintain and oversee hazardous waste storage areas, report containers ready for collection, and keep accurate records in accordance with regulatory requirements., • Ensure contractors and visitors adhere to company policies and safety requirements; provide Personal Protective Equipment (PPE) as applicable., • Assist with special projects such as office relocations, furniture setups, and event preparations., • Support scheduled preventive maintenance (PM) activities and assist senior technicians with unscheduled repairs as directed., • Collaborate with the Environmental Health & Safety team to maintain a safe and compliant work environment., • Identify and communicate facility improvement opportunities to meet functionality, cleanliness, and appearance standards., • Participate in continuous improvement projects and 5S-related performance teams and initiatives., • Adhere to all safety rules, regulations, and PPE requirements. Other duties as required in support of the department and the company. SUPERVISOR RESPONSIBILITIES The responsibilities of this role do not include supervising other employees. QUALIFICATIONS To succeed in this job, an individual must satisfactorily perform each essential job function. The requirements below represent the required knowledge, skill, and ability. Reasonable accommodations may be made to enable individuals with disabilities to perform basic functions. Education & Experience • High school diploma or equivalent required; vocational or technical training in a related field preferred., • 3 years of experience in facilities maintenance, building trades, or a related field preferred., • Basic knowledge of plumbing, electrical, drywall, and pneumatic systems., • Familiarity with CMMS software and work order management is a plus., • Experience in a manufacturing or industrial environment preferred, • Familiarity with 5S methodology and continuous improvement practices preferred. CERTIFICATES, LICENSES, REGISTRATIONS · Valid driver’s license. · Forklift certified. LANGUAGE REQUIREMENTS · Excellent verbal and written communication skills in English. · Conversational in any other language is a plus. Knowledge, Skills & Abilities -Basic proficiency in Microsoft Office Suite, including Word, Excel, and Outlook; comfortable with data entry, basic spreadsheet tracking, and email communication. -Familiarity with CMMS platforms for logging and tracking work orders; willingness to learn and adopt new software tools. -Comfortable using the internet and vendor portals to research parts, pricing, and availability. -Working knowledge of hand tools, power tools, and basic measurement instruments. -Basic understanding of facility systems including plumbing, electrical, drywall, and pneumatic systems. -Ability to follow work orders, maintenance instructions, and safety documentation; willingness to develop skills in reading schematics and OEM manuals over time. -Familiarity with safety protocols including PPE requirements, Lockout/Tagout (LOTO), and hazardous waste handling practices. -Basic awareness of Total Productive Maintenance (TPM) and 5S principles preferred. -Clear and effective communicator; able to relay information accurately in verbal and written formats. -Works well in a team environment and takes direction from senior technicians and supervisors. -Strong attention to detail and commitment to accurate recordkeeping and work order documentation. -Organized and able to manage multiple tasks and prioritize effectively throughout the workday. -Reliable, accountable, and proactive in identifying and reporting facility issues. PHYSICAL DEMANDS The physical requirements outlined below indicate those necessary to fulfill this position's core responsibilities. While performing job duties, the employee will regularly engage in activities such as using hands to finger, handle, or feel and communicating verbally. Additionally, the employee will frequently need to reach with hands and arms while standing and walking as part of the role. Occasional lifting and movement of objects weighing up to fifty (50) pounds and using a ladder may be required. This position also demands specific vision capabilities, including close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Reasonable accommodation will be provided according to ADA regulations to enable individuals with disabilities to perform the job's essential functions. WORK ENVIRONMENT Manufacturing environment: A work environment in a manufacturing plant is the physical and social setting where goods production occurs. Depending on the type of product, process, and plant, the work environment may vary in terms of noise, temperature, safety, and demand. Common characteristics of a work environment in a manufacturing plant are the use of machinery and exposure to hazards such as chemicals, heat, dust, or noise, with a culture of teamwork, communication, and continuous improvement. ENVIRONMENTAL POLICY Providien Thermoforming is fully committed to minimizing the environmental impact of its operations, activities, and products. To achieve this, we adhere to all applicable environmental regulations and laws, prevent pollution, and continuously improve our environmental performance in all our global operations. This is possible through an Environmental Management System that provides a framework for setting and reviewing our environmental objectives and targets. We aim to identify and reduce any negative environmental impact our business activities may have. PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTS • ASTM F–2412–2005, ANSI Z41–1999, or ANSI Z41–1991 rated safety toe shoes in specific areas., • Clear ANSI Z87.1 safety-rated glasses in specific areas., • Hearing protection in specific locations., • Ability to compile with JSA in specific areas. TRAVEL Travel is not required for this position. SALARY INFORMATION According to several states' laws, this position's salary range falls between $20 and $35 per hour. However, this salary information is merely a general guideline. When extending an offer, Providien Thermoforming considers various factors such as the position's responsibilities, scope of work, candidate's work experience, education/training, essential skills, internal pay equity, and market considerations. Requirements:

Job DescriptionDescription: Job Purpose Summary Prepare and keep all grilled and heated food products fresh and at proper temperature, according to Rubio’s guidelines. Maintain cleanliness in support of a productive and profitable restaurant, including product quality and presentation, portion control, speed and efficiency, and cleanliness. The Line 3/4 Cook leads by example and is accountable for following the C.O.R.E. 10. Essential Job Duties • Responsible for product quality and presentation. Properly prepares and holds grilled, fried and heated products. Ensures products are dated, stored and rotated as needed., • Manages portion control. Restocks grill and fryer area. Counts and/or weighs delivered items. Works within established inventory and cost controls. Follows recipe and product item builds., • Works with speed and efficiency. Reads tickets and/or listens for direction to determine proper amount of food to prepare. Works efficiently to meet or exceed Rubio’s service time standards., • Keeps the restaurant clean and maintains restaurant facilities and equipment as needed and/or directed by Management. Washes pots, pans, storage containers and utensils as needed. Maintains personal hygiene as prescribed by law and Rubio’s Dress Code standards., • Follows all Company safety and security policies and procedures. Maintains proper temperature of food product. Complies with health code regulations, including but not limited to hairnet and glove usage. Performs similar and incidental duties as required. Requirements: Job Qualifications Education: High school degree or equivalent combination of education and experience preferred. Experience: Restaurant experience required. Previous kitchen experience preferred, but not required. Knowledge: Knowledge of all aspects in the back-of-house (BOH) restaurant operations. Ability to quickly make and execute decisions regarding food quality, quantity needed, and when to clean. Language Skills: Must be able to read and write in either English or Spanish (abbreviations, kitchen tickets, job aids.) Ability to clearly communicate operational concerns with Management and co-workers. Math Skills: Overall skills and knowledge of mathematical principles and practices. Ability to count, and perform simple mathematical calculations. Other: Ability to follow direction from Management, as well as provide direction to Back-of-House (BOH) Team. Requires assisting coworkers in other tasks or BOH cook positions. Must have reliable transportation to arrive to work on time. Other Abilities: Ability to maintain a high level of patience with others and remain calm in stressful situations. Requires working closely with co-workers for long periods of time. Ability to foster a team environment. Ability to handle multiple priorities. Requires a high-level of concentration and attention to detail for extended periods of time to prepare food items and to maintain cleanliness standards. Reporting Relationships Reports to the General Manager, Assistant Manager and/or Shift Leader. Major Business/Professional Contacts The Line 3/4 will have constant contact with Guests, managers (including shift leaders,) restaurant Team Members, and occasional contact with Restaurant Support Center staff. It is necessary for this person to conduct these relationships with professionalism and cooperation for the betterment of the Company. The Line 3/4 will regularly give suggestions to his/her managers regarding operations. The Line 3/4 is expected to follow the chain of command with respect to all communications (General Manager, District Manager, People Services Business Partner, and Regional Director.) Working and Environmental Conditions Works indoors and outdoors (for events, or to take trash to the dumpster.) Constant exposure to fumes from restaurant, food preparation equipment, and cleaning solvents (ex. flour dust, cooking fumes and gases.) Constant fluctuation in temperature and conditions (ex. heat, cold, humidity) due to movement from one cook area to another. Some noise and vibration exposure. If working an event, may work outdoors in varying temperatures and in different environments such as golf courses and beaches. If assisting with a delivery, may help carry food in catering bags to Guest’s cars or may be asked to make a delivery in own vehicle (only if approved to drive in advance with signed Driver Policy on file.) Physical Demands Must have the ability to lift 55 lbs. Requires standing for long periods of time. Performs fine hand manipulation during food preparation. Must be able to reach 5’6” minimum. Flexible hours, night and day, weekends and holidays. Ability to operate all kitchen-related tools and equipment, such as the dishwasher, food drill, fryer, rice cooker, etc. Must be able to taste food (including, but not limited to, seafood, chicken, and steak) to ensure the flavor profile and quality standards are met. Tools and Equipment Used Fryer, grills, knives, refrigerators (including walk-in refrigerator,) steam table, condiment table, microwave oven, stove, dishwasher, cleaning supplies & equipment (towels, broom, dust pans, mops, etc.,) cleaning solvents (bleach, cleanser, window cleaner, etc.,) kitchen supplies and utensils (prep safety glove, food totes, stock pots, tongs, spatulas, cutting boards, etc.,) and food processing equipment (food drill, etc.)

Job DescriptionOverview Company Overview: Join Allied Universal® Facility Management and Janitorial Services! We're committed to delivering exceptional cleaning, landscaping, and restoration services for commercial facilities. Be part of a welcoming and collaborative team where innovation meets excellence. We offer steady, reliable work in janitorial management, full-time and part-time janitorial roles, maintenance, landscaping, and metal restoration. If you want to make a meaningful impact and build a lasting career, we have opportunities for you. Join us and grow with a leader in the industry! Job Description Allied Universal Janitorial Services is seeking the position of a Maintenance Technician. The main goal for this position is keeping rooms and facilities looking sharp and running smooth for guests. As a Maintenance Technician for Allied Universal Janitorial Services, you will be responsible for performing room refreshers, routine electrical, light plumbing, architectural features/finishes and systems' maintenance for the facility to the client's standards. The Technician will also approach work with a "safety first" attitude by following all safety practices, policies, and procedures, promoting safe working conditions, and ensuring the proper maintenance and organization of all equipment. Qualifications/Requirements • Be at least 18 years of age with high school diploma or equivalent for full time positions., • Certain positions may require successful completion of a background investigation and a drug screen in accordance with all federal, state, and local laws., • Effective communication skills with customer, patrons, and employees- assisting others in a friendly and engaging manner at all times., • Knowledge of cleaning chemicals and supplies., • A proactive approach in anticipating, listening to, understanding, and responding to customer needs, • Experience providing quality maintenance services in all trades - HVAC, electrical, plumbing, carpentry. Read and interpret schematics and building plans and have strong electrical background, • Knowledge of OSHA and safety standards for maintenance programs., • Possess basic computer proficiency., • Strong attention to detail and reliability on completing tasks that can be repetitive., • Able to:, • Work in various working conditions and environments such as cold weather, rain/snow or heat for extended periods., • Ability to operate various cleaning equipment and machinery including scrubbers, pressure washer, and carpet extractor., • Ability to climb ladders, stand or walk on various surfaces for long periods of time., • Ability to lift and carry items and/or machinery up to 50 pounds. If you have difficulty using the online system and require an alternate method to apply or require an accommodation, please contact our local Human Resources department. To find an office near you, please visit: . Requisition ID 2026-1580449

Job Description GENERAL JOB SUMMARY: Perform corrective maintenance, troubleshooting, and repairs for the U.S. Border Patrol (USBP) and Air and Marine Operations (AMO) facilities, systems, and associated grounds. The General Maintenance Worker is responsible for performing all types of building maintenance, construction, and repair tasks that require knowledge and application of a variety of trade practices associated with such occupations as electrical, carpentry, masonry, plumbing, ironwork, painting, HVAC, and fire protection. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Perform corrective maintenance and repair to facilities, associated grounds, and related structures, to include electrical work, carpentry, masonry, plumbing, ironwork, painting, concrete work, HVAC, fire protection, earthwork, irrigation and required repairs and other related duties., • Perform troubleshooting to determine underlying cause of issue(s) and identify the most effective and efficient manner in which to proceed to make necessary repairs., • Perform visual examination and operational tests to determine the need for, and the performance of, repair work for air conditioning/refrigeration, electrical, plumbing and related piping and ventilating tasks., • Must be able to work independently to support maintenance and repair activities by maintaining facilities, associated grounds, and related structures., • Must understand and incorporate blueprints, factory manuals, operating manuals, and CBP design standards., • Exhibit effective customer service skills by consistently communicating with Project Manager and customers to ensure complete customer satisfaction experience., • High school diploma or equivalent General Educational Development (GED) Certificate., • A minimum of 3 years' experience in the General Maintenance field., • Working knowledge of work practices, methods, processes, and skills within commercial facilities., • Skills in two or more trade areas (i.e. HVAC, plumbing, and electrical)., • Must have the ability to understand and comprehend technical manuals, drawings, diagrams, and any other technical data supplied by various manufacturers., • Must have a working knowledge and comply with Occupational Safety and Health Administration (OSHA) regulations., • Must possess a valid driver's license and driving history must meet company standards throughout employment. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Essential and marginal functions may require maintaining physical condition necessary for bending, stooping, sitting, walking, or standing for prolonged periods of time. This job is performed in a shop setting, various buildings and out of doors. This position requires driving and working out of doors in extreme heat/cold and possibly rainy weather. The employee may occasionally lift and/or move up to 50 pounds. Physical stamina and strength in all its forms (endurance, temperature/climate, stress, etc.) is necessary. IntegriWard, LLC is committed to providing reasonable accommodation as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or accommodation to complete your application, please contact us at or (210) 842-1535. Please provide your contact information and a description of your accessibility issue. We will make a determination on your request for reasonable accommodation on a case-by-case basis.

Job DescriptionBenefits: • Competitive salary, • Dental insurance Position Reports to: Kitchen Manager Basic Functions: A line cook is responsible for the daily preparation of food items in the pantry, fry and/or stations or other areas of the kitchen. Essential Functions: 1. Sets up station according to restaurant guidelines., 2. Prepares all food items ads directed in a sanitary and timely manner., 4. Cleans and maintains station in practicing good safety, sanitation, organizational skills., 5. Has understanding and knowledge to properly use and maintain all equipment in station., 6. Assists with the cleaning, sanitation, and organization of kitchen, walk-in coolers, and all storage areas., 8. Basic understanding of professional cooking and knife handling skills., 9. Understanding and knowledge of safety, sanitation and food handling procedures., 11. English language and professional communications skills are required., 12. Ability to take direction., 13. Ability to work in a team environment., 14. Ability to work calmly and effectively under pressure., 15. Must have problem solving abilities, be self-motivated, and organized., 17. This position will spend 100% of the time standing., 18. Occasional environmental exposures to cold, heat, and water., 19. The individual must be able to transport up to 50 pounds on occasion and up to 35 pounds regularly. 4. Must be able speak, read and understand basic cooking directions., 20. Must be able to hear with 100% accuracy with correction.

Job DescriptionJob Summary: The Landscape Irrigation and Enhancement Technician is responsible for the installation, maintenance, and repair of irrigation systems and landscape enhancements for residential properties. This position requires technical knowledge of irrigation systems, attention to detail, and the ability to provide high-quality customer service. The technician will work to ensure efficient water usage and aesthetically pleasing landscapes, contributing to the health and beauty of the environment. Duties/Responsibilities • Irrigation System Installation and Maintenance:, • Install, repair, and maintain various types of irrigation systems, including sprinklers, drip systems, and controllers., • Perform routine inspections and adjustments to ensure systems are functioning optimally., • Diagnose issues with irrigation systems, such as clogged lines, broken sprinkler heads, or electrical malfunctions, and make necessary repairs., • Program irrigation timers and controllers to ensure appropriate watering schedules., • Water Conservation:, • Evaluate irrigation systems for efficiency, ensuring proper water usage and conservation practices., • Recommend adjustments or upgrades to systems that improve water efficiency and reduce waste., • Landscape Enhancements:, • Assist with landscape enhancement projects, including planting beds, hardscaping as well as softscape. Also, lighting installations and other duties., • Install and maintain decorative features, including water features, lighting, and other aesthetic elements., • Advise on and implement upgrades to enhance the overall appearance of the landscape., • Troubleshooting and Problem Solving:, • Identify and resolve problems related to irrigation systems, plant health, and water distribution., • Provide quick solutions for issues such as poor drainage, system malfunctions, or plant over/underwatering., • Customer Interaction:, • Communicate with clients about their irrigation needs and enhancement options., • Provide recommendations for system upgrades or improvements based on site conditions and customer preferences., • Ensure customer satisfaction by maintaining high-quality service and addressing any concerns promptly., • Equipment Operation and Maintenance:, • Operate and maintain tools and equipment such as trenchers, pipe cutters, and pressure testers., • Ensure all equipment is kept in good working condition and report any needed repairs or replacements to supervisors., • Safety and Compliance:, • Follow all safety procedures and guidelines when handling equipment, chemicals, and materials., • Ensure compliance with local regulations regarding water usage and environmental impact., • Maintain a clean and organized work environment, adhering to company standards for safety and appearance., • Documentation and Reporting:, • Maintain accurate records of work performed, materials used, and any system issues or repairs., • Provide regular updates to supervisors or clients on system performance or enhancement progress., • Lead a team of landscape maintenance laborers, assigning tasks, and ensuring productivity., • Train and mentor team members on landscaping techniques, equipment usage, and safety protocols., • Maintain a positive and motivating work environment to maximize team performance., • Other duties may apply and as requested.Required Skills/Abilities:, • Good verbal communication skills., • Good understanding of groundskeeping and landscaping practices and procedures., • Ability to work efficiently and thoroughly., • Ability to follow directions., • Thorough understanding of how to care for various types of lawns, greenery, and plants., • Ability to operate various types of power equipment including lawn mowers, trimmers, hedge trimmers, leaf blowers, and other landscaping equipment., • Ability to use hand tools required for landscaping., • High school diploma or equivalent; relevant certifications (e.g., Irrigation Association Certification) preferred., • Minimum of 2-3 years of experience in landscape irrigation installation & maintenance or a related field., • Strong knowledge of irrigation systems, controllers, and water management principles., • Experience with landscape enhancement tasks, such as planting and hardscaping, is a plus., • Ability to troubleshoot and repair irrigation systems and equipment., • Strong communication skills and a customer-service-oriented mindset., • Ability to work independently and as part of a team., • Valid driver’s license (preferably with a clean driving record)., • Ability to lift and carry heavy equipment and materials (up to 50 pounds)., • Comfort with working outdoors in various weather conditions., • Valid driver’s license (preferably with a clean driving record).Physical Requirements:, • Outdoor work in varying weather conditions, including heat, rain, and cold., • Potential for early morning or weekend work depending on client needs., • May require working in confined spaces or areas with limited access.

Job Description Job Summary: We are looking for a skilled and experienced Refrigeration Technician to join our team! In this role, you will install, service, or repair refrigeration systems in commercial establishments. You should have past experience in a refrigeration service technician role and hold an EPA certification. A team player who is comfortable working independently, you love the feeling of a job well done and take pride in completing customer jobs with efficiency. A positive attitude is a must! Essential duties and Responsibilities: This job description gives an overview of the overall essential functions, competencies, skills, and abilities for the Service Technician role. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other duties may be assigned: • Able to respond to heavy workload of service calls in a professional manner., • Communicates effectively with customers, regardless of their level of technical knowledge: can explain to customer the cause of their problem and the remedy; if problem has not been repaired, offers explanation of situation and recommended next steps., • Able to follow and utilize troubleshooting guides to identify problems in a short period of time, • Consistently checks system operations and safety and limit controls before leaving job locations, • Ensures customers’ questions/concerns have been addressed before leaving the work site, • Uses proper tools and instruments while troubleshooting, • Incorporates solution techniques to assist other service representatives and helps resolve issues and customer problems, • Schedules arrival and departure with customers, • Communicates tactfully to offer suggestions if system problems are caused by the customer, • Demonstrates ability to determine priorities based on a call schedule, responding to inadvertent interruptions, carrying proper tools and materials, and scheduling vehicle maintenance, • Promptly and accurately completes all required paperwork, • Keeps supervisor and manager informed of new developments, changes, or customer complaints, • Completes service reports daily: obtains customer signature on all service reports, • Signs up for memberships and technical organizations to improve knowledge and skills, • Keeps technical knowledge current regarding equipment and concepts, • Searches out and reads applicable manuals Position Overview: We are seeking a technician who has either hands-on experience or has recently completed trade school training in one or more of the following areas: • HVAC systems, • Commercial kitchen equipment, • Commercial refrigerationAs a technician with Brian Despres Refrigeration, you’ll be trusted to provide high-quality service to our commercial clients. You’ll have the opportunity to work with a variety of systems and equipment, take on new challenges, and grow with our company.Qualifications:, • Flexible Scheduling, • Competitive Compensation, • Career Advancement Opportunities, • Health Insurance, • PTO, • Paid holidays, • 401K match Qualifications: • Experience in refrigeration, or commercial kitchen equipment service or recent graduation from a trade school in these fields, • EPA certification preferred (or willingness to obtain), • Strong troubleshooting and problem-solving skills, • Valid driver’s license and clean driving record, • Ability to work independently and as part of a team, • Excellent communication and customer service skillsWhy Work with Us?, • Family-owned and team-oriented environment, • Competitive pay based on experience, • Opportunities for growth as our company expands, • Training and support to help you sharpen your skills, • A culture that values quality work, relationships, and integrityIf you’re an experienced technician—or a recent trade school graduate—looking to join a growing company that values both its customers and its employees, we’d love to hear from you! Job Type: Full-time Pay: $18.00 - $50.00 per hour Expected hours: 40 – 55 per week Work Location: In person • Valid Drivers License, • EPA Certification, • Experience with operation and maintenance of chillers, heat pumps, air handlers, • The physical demands and work environment characteristics described here are representative of those that must be met by an associate to successfully perform the essential functions of this job., • Able to lift 75 lbs from floor to waist with possible repetition, • Able to lift 50 lbs from shoulder to overhead, • Able to work with both arms above head for minimum of 5 minutes, • Able to carry 50 lbs for a distance of 25 feet, • Able to push or pull 125 for a distance of 150 feet, • Able to climb stairs and ladders, • Able to carry 30 lbs while climbing stairs or a ladder, • Able to grip and operate hand tools, power tools, and safety equipment, such as chain falls, • Able to lift legs and step over obstacles up to 19 inches above the ground, • Able to perform work while in varying physical positions, such as lying on side, in a kneeling position, while standing on a ladder, • Able to access rooftop units and work at heights and in some cases tight or enclosed spaces, • Able to wear a respirator if conditions require; may have exposure to potentially harmful chemicals or materials, • Able to crawl for a distance of 25 feet, • Able to stoop, squat, or kneel for up to 10 minutes at a time

Job Description Position: Barista Our Blend: Born and brewed in Southern California since 1963, The Coffee Bean & Tea Leaf® has become one of the world’s largest specialty coffee and tea retailers. Today we have global presence with Cafés around the world and offices in California, Singapore and Malaysia. As we grow our brand, we are committed to maintaining our values, heritage and passion for our products. We have always had a creative and caring spirit. This energy embodied by our Team Members made us famous and beloved by our guests, first in Southern California and now around the world. We are a brand centered around passion. A passion for our premium products, our people and our customers. Passion is contagious, and we’ve got a serious case of it. If you are just as passionate as we are, come join our Brew Crew!! The position we are brewing: Do you love premium Coffee & Tea? Do you want to work for a socially responsible, guest service driven company? The Coffee Bean & Tea Leaf® Barista curates memorable experiences for our guests and the CBTL team daily. We are seeking friendly, dedicated, and creative Barista’s to provide our guests with the world’s finest quality coffee and tea experience. As a member of our team, you will have the opportunity to engage with guests while developing your skills in a variety of areas across the business. Many of our General Managers started off as Baristas! If you are looking for an opportunity where you can be yourself and have fun doing it, while creating a base of loyal CBTL fans out of the local community, we want to talk to you about joining our growing and diverse team. What you will Measure and Blend: • Be a warm host- guide guests through their coffee experience from beginning to end providing exceptional guest service throughout, • Create coffee moments- share your knowledge, our coffee, and our sustainability practices with guests., • Be a coffee & tea expert. You bring the passion, we provide the training, and you share it with the guest., • Generate new guests. Many guests shop online these days; however, the store is where we meet many of our guests for the first time., • Care about safety. Safe, healthy employees and guests are our number one priority., • Discounts on our Coffee and Tea, • Medical, Dental, Vision as applicable, • Pay Range: $20.00-$22.00 Hourly (Based on minimum wage ordinance and experience.), • Observed Holidays, • Sick Pay, • Referral bonus program, • Flexible Uniforms, • Retirement Plan, • Life Assistance Program, • 24 Hour Fitness Discount, • Flexible Schedule, • Fun Environment., • Climbing, • Balancing, • Stooping, • Kneeling, • Crouching, • Reaching, • Standing, • Walking, • Pushing, • Pulling, • Lifting, • Grasping, • Feeling (Tangible), • Talking, • Hearing, • Repetitive Motion, • Sitting, • Medium work - Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects., • The worker is subject to both environmental conditions. Activities occur inside and outside., • The worker is subject to extreme cold. Temperatures typically below 32 degrees for periods of more than one hour. Consideration should be given to the effect of other environmental conditions, such as wind and humidity., • The worker is subject to extreme heat. Temperatures above 100 degrees for periods of more than one hour. Consideration should be given to the effect of other environmental conditions, such as wind and humidity., • The worker is subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level., • The worker is subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts and moving vehicles. The Coffee Bean & Tea Leaf® provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, sex, color, religion, gender, sexual orientation, national origin, age, disability, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws. This policy was intended to comply, and The Coffee Bean & Tea Leaf® so complies, with applicable state and local laws governing non-discrimination in employment in every location in which the Company has facilities. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. We are dedicated to providing a work environment free from discrimination and harassment, and where employees are treated with respect and dignity. We use eVerify to confirm U.S. Employment eligibility.

Job Description "At J.T. Bros, our mission is to craft unforgettable sandwiches with chef-inspired creativity, scratch-made ingredients, and family-driven heart—bringing bold flavors and genuine hospitality to every guest, every time.Job descriptionJoin J.T. Bros Now Hiring: Cook Pay Rate: $17.75hr (Estimated Compensation with Tips $23.50-$25.00hr) Location: San Diego Airport Reports to: General Manager / Assistant General Manager Are you passionate about sizzling pans, bold flavors, and creating food that keeps people coming back for more. We're searching for a rock star cook who brings focus, flavor, and a strong sense of teamwork to the line. Why Join J.T. Bros? Competitive Pay & Generous Tips – Your hard work deserves great rewards! Comprehensive Health Coverage – Best-in-class health, telehealth, dental, and vision plans. Paid Time Off - Recharge with vacation, flexible days, and sick leave. Holiday Pay – Time-and-a-half pay for 7 paid holidays! Daily Meal Credit – Enjoy a $15 meal credit every shift. Career Growth & Training – We invest in YOU! What You'll Be Doing: • Prep, cook, and plate food with precision following recipes and company standards, • Taste-test your creations—quality control never tasted so good, • Coordinate with team members to hit ticket times and deliver legendary food fast, • Keep your station clean, organized, and stocked like a pro, • Operate kitchen equipment safely and skillfully, • Monitor food temperatures and handle items to meet all health and safety codes, • Follow food safety and sanitation procedures to the letter, • Stay flexible pitch in with tasks that keep the kitchen humming, • A positive attitude and strong work ethic—grit meets grace under pressure, • Minimum 1 year of kitchen experience (high-volume or quick service preferred), • Current Food Handler’s Card or ServeSafe Certification, • Comfortable using kitchen tools and working in a hot, fast-paced environment, • Solid communication and ability to follow instructions, • Walk and stand your whole shift, this is an active role, • Handle heat, steam, and heavy lifting (30 lbs or more), • Use protective gear and sharp equipment safely love to have you behind our line. Apply today & become part of the J.T. Bros Legacy

Job DescriptionDescription: SUMMARY The Manufacturing Maintenance and Facilities Lead is a senior technical role responsible for coordinating and performing preventive maintenance, troubleshooting, and repair of critical electrical, mechanical, vacuum, pneumatic, and hydraulic systems across a thermoforming manufacturing environment. This position serves as the technical lead for the maintenance team, directing work assignments, developing technician skills, and driving equipment reliability through CMMS oversight and continuous improvement. The role also supports building infrastructure, facility compliance, and contractor coordination in partnership with Maintenance and Facilities leader. ESSENTIAL JOB FUNCTIONS · Assign preventive maintenance and repair work to technicians based on production schedules, urgency, and individual skill levels. · Lead and perform preventive maintenance, troubleshooting, and repair on industrial manufacturing equipment, including thermoforming machines, temperature control units, vacuum pumps, die cutters, molds, air compressors, CNC machines, drying ovens, and material handling systems. · Troubleshoot and repair industrial electrical controls, hydraulic, vacuum, pneumatic, and mechanical systems. · Serve as the technical lead for the maintenance team; provide guidance and hands-on expertise for complex repairs and troubleshooting. · Develop the skills of other maintenance technicians through coaching, knowledge sharing, and mentorship. · Oversee and ensure the accuracy and completeness of equipment records and work orders in the CMMS. · Maintain and monitor the spare parts inventory; source and stock parts to support ongoing maintenance needs. · Maintain the integrity of equipment manuals and technical documentation. · Identify and implement process and procedural improvements with a focus on equipment reliability, efficiency, and longevity. · Perform maintenance, repairs, and support remodeling on building infrastructure, including drywall, plumbing, electrical, and pneumatic systems. · Oversee hazardous waste storage areas; conduct inspections, coordinate collection services, and maintain accurate records. · Coordinate with and support contractors during scheduled onsite work; monitor adherence to safety requirements and company policies. · Support facility service coordination, including building trades, uniform supplies, cafeteria vending, janitorial, and forklift services, as directed by the Maintenance and Facilities Manager. · Assist with facility compliance activities, including water testing, fire system inspections, and insurance audits, in support of the Maintenance and Facilities Manager. · Adhere to and promote all safety policies and procedures, including Lockout/Tagout (LOTO) protocols. · Promote and maintain a clean, organized, and safe work environment. Perform other duties as assigned in support of the department and the company. SUPERVISOR RESPONSIBILITIES This role does not carry formal supervisory authority. However, as the technical lead for the maintenance team, this position directs daily work assignments, provides hands-on guidance, and supports the development of other technicians. Work direction is provided in coordination with and under the oversight of the Maintenance and Facilities leader. QUALIFICATIONS To succeed in this job, an individual must satisfactorily perform each essential job function. The requirements below represent the required knowledge, skill, and ability. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. EDUCATION and EXPERIENCE · High school diploma or GED required; vocational or technical training in an electro-mechanical discipline preferred. · Journeyman-level certification in Electrical, HVAC, Machinist, or Tool and Die preferred; other electro-mechanical apprenticeship or equivalent education considered. · Valid driver's license required. · Six (6) or more years of experience troubleshooting and repairing electro-mechanical equipment in an industrial manufacturing environment. · Experience in a maintenance lead or technical lead role preferred. · Four (4) or more years of experience in a facilities maintenance role; experience may overlap with industrial maintenance experience. · Minimum two (2) years’ experience programming/modifying in RSLogix and Studio 5000 logic controllers. · Experience with robotics or other automated manufacturing systems is highly desirable (KUKA and KRL Language preferred). · Experience with TPM and Lean manufacturing principles a plus. · Project management experience desired. CERTIFICATES, LICENSES, REGISTRATIONS · Valid driver's license required. · Journeyman-level certification in Electrical, HVAC, Machinist, or Tool and Die preferred. · Other electro-mechanical apprenticeship credentials or vocational certifications considered in lieu of the above. LANGUAGE REQUIREMENTS · Excellent verbal and written communication skills in English. · Conversational in any other language is a plus. MATHEMATICAL SKILLS · Basic arithmetic: add, subtract, multiply, and divide whole numbers, fractions, decimals, and percentages. JOB SKILLS · Extensive knowledge of electrical controls, hydraulic, pneumatic, vacuum, and mechanical systems in an industrial manufacturing environment. · Advanced troubleshooting skills applicable to industrial equipment; ability to read and interpret electrical schematics, ladder logic, and OEM technical documentation. · Proficiency in PLC I/O troubleshooting and diagnosis. · Competency in hydraulics, pneumatics, and mechanical disassembly, repair, and reassembly. · Competency in facilities maintenance, including plumbing, electrical, drywall, and HVAC systems. · Experience with CMMS platforms; ability to manage, document, and ensure accuracy of work orders and equipment records. · Proficient in Microsoft Office (Word, Excel, Outlook). · Ability to recognize and proactively address worn or failing components to prevent unplanned downtime. · Strong attention to detail and organizational skills; ability to manage competing priorities and adapt to changing production demands. · Effective verbal and written communication skills; ability to communicate clearly across organizational levels with professionalism and respect. · Math skills sufficient to perform calculations involving whole numbers, fractions, decimals, rates, ratios, and percentages. · Ability to work both independently and collaboratively as part of a team. · Strong read, write, speak, and comprehension proficiency in English, including technical terminology used within the organization. PHYSICAL DEMANDS As part of their job duties, the employee must be able to sit, stand, and walk throughout the day while frequently using their hands to handle objects and communicate verbally. Additionally, they may need to reach, stretch, push, pull, crouch, stoop, and occasionally lift objects weighing up to fifty (50) pounds. This role requires specific vision abilities, including close, distance, color, peripheral vision, depth perception, and the ability to adjust focus. According to ADA regulations, reasonable accommodation will be provided to ensure that individuals with disabilities can perform the job's essential functions. WORK ENVIRONMENT Manufacturing environment: A work environment in a manufacturing plant is the physical and social setting where goods production occurs. Depending on the type of product, process, and plant, the work environment may vary in terms of noise, temperature, safety, and demand. Common characteristics of a work environment in a manufacturing plant are the use of machinery and exposure to hazards such as chemicals, heat, dust, or noise, with a culture of teamwork, communication, and continuous improvement. ENVIRONMENTAL POLICY Providien Thermoforming is fully committed to minimizing the environmental impact of its operations, activities, and products. To achieve this, we adhere to all applicable environmental regulations and laws, prevent pollution, and continuously improve our environmental performance in all our global operations. This is possible through an Environmental Management System that provides a framework for setting and reviewing our environmental objectives and targets. We aim to identify and reduce any negative environmental impact our business activities may have. PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTS · ASTM F–2412–2005, ANSI Z41–1999, or ANSI Z41–1991 rated safety toe shoes in specific areas. · Clear ANSI Z87.1 safety-rated glasses in specific areas. · Hearing protection in specific locations. · Ability to compile with JSA in specific areas. TRAVEL Approximately 5% of travel is expected. SALARY INFORMATION: According to several states' laws, this position's salary range falls between $35 and $55 hourly/annually. However, this salary information is merely a general guideline. When extending an offer, Providien Thermoforming considers various factors such as the position's responsibilities, scope of work, candidate's work experience, education/training, essential skills, internal pay equity, and market considerations. Providien Thermoforming does not accept unsolicited resumes from staffing agencies or recruiting firms. Any resumes submitted without a prior written agreement will not be considered, and no fee will be honored. Requirements:

Job DescriptionLine Cook Job Description Reporting Relationships Position Reports to: Kitchen Manager Basic Functions: A line cook is responsible for the daily preparation of food items in the pantry, fry and/or stations or other areas of the kitchen. Essential Functions: 1. Sets up station according to restaurant guidelines., 2. Prepares all food items ads directed in a sanitary and timely manner., 4. Cleans and maintains station in practicing good safety, sanitation, organizational skills., 5. Has understanding and knowledge to properly use and maintain all equipment in station., 6. Assists with the cleaning, sanitation, and organization of kitchen, walk-in coolers, and all storage areas., 8. Basic understanding of professional cooking and knife handling skills., 9. Understanding and knowledge of safety, sanitation and food handling procedures., 11. English language and professional communications skills are required., 12. Ability to take direction., 13. Ability to work in a team environment., 14. Ability to work calmly and effectively under pressure., 15. Must have problem solving abilities, be self-motivated, and organized., 17. This position will spend 100% of the time standing., 18. Occasional environmental exposures to cold, heat, and water., 19. The individual must be able to transport up to 50 pounds on occasion and up to 35 pounds regularly., 20. Must be able speak, read and understand basic cooking directions., 21. Must be able to hear with 100% accuracy with correction.

Job DescriptionSalary: $22.00-$24.00 per hour (based upon experience) + tips Set against the sparkling backdrop of the Pacific Ocean, JRDN is a modern, 10,000-square-foot award-winning restaurant inside the iconic Tower23 Hotel. Known for our casually sophisticated steak and seafood menu, stunning ocean views, and sleek California vibes, we serve lunch, dinner, and weekend brunchwhere every visit feels like a mini vacation. Were looking for passionate, skilled Part Time Line Cooks to join our back-of-house team. If youre experienced in high-volume, high-quality kitchens and ready to work with fresh ingredients in a fast-paced environmentwe want to hear from you. What Youll Do: • Prepare a variety of meats, seafood, poultry, vegetables, and sauces using various methods including broiling, grilling, frying, and sauting, • Follow exact recipes and plate presentations for every dish, • Maintain proper portion control and food prep procedures, • Keep your station clean, stocked, and organized at all times, • Assist in prepping ingredients and closing the kitchen per JRDN standards, • Collaborate with the team to ensure smooth, consistent service, • Uphold food safety and sanitation standards consistently What Were Looking For: • Experience: 2+ years in a professional kitchen (not fast food); fine dining or upscale restaurant preferred, • Certifications: Valid San Diego Food Handlers Card (or willingness to obtain one after hire with company support), • Communication: Clear and professional interaction with chefs, kitchen staff, and FOH, • Stamina: Able to stand for long periods and lift and carry up to 40 lbs, • Skillset: Knowledge of cooking techniques, prep, timing, and cleanliness, • Professionalism: Adheres to grooming and hygiene standards, • Availability: Flexible schedule including weekends and holidays Why Youll Love It Here: • Competitive hourly pay ($22.00-$24.00 per hour)+ tips, • Paid sick time after 90 days, • Calsavers Retirement Savings Option, • Flexible scheduling, • Discounts at all Eat, Drink and Sleep venues located in California and Arizona, • Access to the Employee Assistance Program (EAP), • A gorgeous oceanfront kitchen setting Ready to Turn Up the Heat? If you're a team player who thrives in a dynamic kitchen environment and takes pride in every plateJRDN wants you on the line. Please apply either via this ad or in person at 723 Felspar Street, San Diego, CA 92109 TOWER23 Hotel is San Diego's only luxury, lifestyle hotel on the beach. TOWER23 Hotel derives its name from lifeguard tower 23 positioned on Pacific Beach by the hotel. The exclusive resort community of La Jolla is just north of the hotel, while downtown San Diego, the airport, major business centers and popular area attractions are just minutes away. San Diego's vibrant beach life sets the stage for TOWER23's distinctive architecture and style. Our Company prohibits discrimination and harassment of any type and provides equal employment opportunities to all employees and applicants without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, transfer, leaves of absence, compensation and training.

Job Description We are a premier commercial HVAC company based in the heart of San Diego (Kearny Mesa), proudly serving the community for over 42 years. We are seeking an experienced Senior Commercial HVAC Service Technician to join our team in a secure, long-term career position. This is a stable, year-round opportunity, not a seasonal or summer role. This is an excellent opportunity for a highly skilled technician ready to elevate their career. The ideal candidate brings advanced technical expertise, strong diagnostic and troubleshooting abilities, and a commitment to delivering exceptional customer service. In this role, you will support field operations, mentor junior technicians, and ensure the reliable, efficient performance of complex commercial HVAC systems. If you are passionate about your trade and looking for a long-term, rewarding career with a respected company, we encourage you to apply today. Key Responsibilities As a Senior Service Technician, you will independently diagnose, service, repair, and maintain a wide range of commercial HVAC equipment, including: • Water Source Heat Pump systems (Horizontal and Vertical), • Cooling towers (40 to 250+ tons), mechanical yards, boilers, pumps, and VFD systems, • Air-cooled and water-cooled chillers (small to large tonnage), • Hydronic piping systems: condenser water, chilled water, hot water, refrigeration, and condensate systems, • Ventilation systems, including 100% outside air (OA), exhaust systems (general, environmental, chemical, and process), • Four-pipe systems (chilled water and heating hot water), • Rooftop packaged units, split systems, and conventional DX systems, • VRF / VRV systems, including heat recovery systems (installation and service experience preferred), • VAV systems and associated hot water heating systems, • Duct systems including S&D, TDC, stainless steel, coated PVS, and custom sheet metal fabrication Additional responsibilities include: • Perform advanced diagnostics and troubleshooting of mechanical, electrical, and control systems, • Lead service calls independently and provide technical guidance when needed, • Support installation, repair, and preventive maintenance programs, • Mentor and assist junior technicians in troubleshooting and best practices, • Communicate professionally with customers regarding system conditions and recommendations, • Accurately complete service reports and documentation using mobile applications, • Maintain safety standards and company quality expectations Requirements • Minimum 7+ years of commercial HVAC service experience, • Strong experience with chillers, boilers, cooling towers, pumps, and advanced HVAC systems, • Proficient in electrical diagnostics, piping systems, and controls troubleshooting, • Ability to work independently with minimal supervision, • Strong customer service and communication skills, • Valid driver’s license and clean driving record, • Ability to lift up to 50 pounds and work on ladders and rooftops, • Basic trade tools required, • Ability to use mobile service applications and digital reporting tools Preferred (but not required): • VRF / VRV certifications, • HVAC technical school or formal training, • Experience mentoring technicians, • Sheet metal fabrication experience Compensation • 401(k) Retirement Plan, • Comprehensive Health, Dental, and Vision Insurance, • Life Insurance Coverage, • Paid Time Off (PTO), • Six Paid Holidays, • Pet Insurance Options, • Overtime opportunities available Schedule • Full-time position, • 8-hour shift, • Optional overtime, including nights and weekends Why Join Our Team? With over four decades of service in San Diego, we offer stability, growth opportunities, and a professional environment where experienced technicians are valued and supported. Senior technicians have the opportunity to expand their leadership role while working on diverse, complex commercial HVAC systems. Company DescriptionWe are a well-established commercial HVAC company based in Kearny Mesa, proudly serving San Diego for over 43years. Our reputation is built on technical excellence, customer trust, and long-term employee growth. We care about each other and promote a positive environment.We are a well-established commercial HVAC company based in Kearny Mesa, proudly serving San Diego for over 43years. Our reputation is built on technical excellence, customer trust, and long-term employee growth.\r\nWe care about each other and promote a positive environment.

Job Description If you’re a problem-solver with a can-do attitude and a proven record of experience in the field, you might be perfect for our HVAC service technician position. Our growing HVAC company needs a service tech to meet clients at their home or place of business to troubleshoot, diagnose, and fix HVAC equipment. Strong interpersonal skills are a must in this dynamic role. You have the technical skills to identify HVAC problems, and the communication skills to explain what needs to be repaired, installed, or replaced, and why. If this sounds like the perfect fit for you, apply now! Compensation: $40 - $65 hourly Responsibilities: • Estimate costs of installation, repairs, and services to customers, • Check newly installed components to make sure they work, • Interpret and apply electrical schematics, diagrams, blueprints, and wiring diagrams, • Enter completed projects and the parts used into the database, • Water Source Heat Pump systems (Horizontal and Vertical), • Cooling towers (40 to 250+ tons), mechanical yards, boilers, pumps, and VFD systems, • Air-cooled and water-cooled chillers (small to large tonnage), • Hydronic piping systems: condenser water, chilled water, hot water, refrigeration, and condensate systems, • Ventilation systems, including 100% outside air (OA), exhaust systems (general, environmental, chemical, and process), • Four-pipe systems (chilled water and heating hot water), • Rooftop packaged units, split systems, and conventional DX systems, • VRF / VRV systems, including heat recovery systems (installation and service experience preferred), • VAV systems and associated hot water heating systems, • Duct systems, including S&D, TDC, stainless steel, coated PVS, and custom sheet metal fabrication Additional Responsibilities Include: • Perform advanced diagnostics and troubleshooting of mechanical, electrical, and control systems, • Lead service calls independently and provide technical guidance when needed, • Support installation, repair, and preventive maintenance programs, • Mentor and assist junior technicians in troubleshooting and best practices, • Communicate professionally with customers regarding system conditions and recommendations, • Accurately complete service reports and documentation using mobile applications, • Ability to lift 50 lbs or 100 lbs with aid, • Certification or associate’s degree from an HVAC program at a technical school or 1+ years experience in the field as an HVAC helper or equivalent, • Able to communicate clearly and effectively, and an exceptional problem-solver, • Applicant must have high school diploma or equivalent, • Candidate must obtain required state and local HVAC technician licenses, • Minimum 7+ years of commercial HVAC service experience, • Strong experience with chillers, boilers, cooling towers, pumps, and advanced HVAC systems, • Proficient in electrical diagnostics, piping systems, and controls troubleshooting, • Ability to work independently with minimal supervision, • Strong customer service and communication skills, • Valid driver’s license and clean driving record, • Ability to lift up to 50 pounds and work on ladders and rooftops, • Basic trade tools required, • Ability to use mobile service applications and digital reporting tools Preferred (but not required): • VRF / VRV certifications, • HVAC technical school or formal training, • Experience mentoring technicians We are a leading commercial HVAC company based in the heart of San Diego (Kearny Mesa). Rooted in our family-owned traditions, we have been serving San Diego for over 42 years. With dedication to excellence and a commitment to innovation, we strive to deliver exceptional results for clients. Benefits: • Comprehensive medical benefits – the company covers up to 100% of employee health insurance premiums, depending on the selected plan, • Dental and vision insurance, • 401(k) retirement plan with company matching, • Life insurance, • Paid time off, • Flexible schedule

Job DescriptionDescription: Why join us? Our Vision – To provide outstanding garage door repair service, complete customer satisfaction and a program that rewards excellence from our franchisees, technicians, and staff. Our Mission – To establish Precision Door Service as the public standard and national household name in garage door repair service. Our Values – Culture, Reliable People, Career Oriented, Industry Standard Training and Safety, Competitive Salaries & Benefits, Garage Door Leaders The Residential Installer serves as the door installer for residential garage doors and related components. The installer interacts with customers daily providing them with excellent customer service. Work assignments are received from the call center or Customer Service Managers (CSM’s.) Any problems, questions, or issues will be referred to the Branch Manager for clarification or resolution. The Residential Garage Door Installer is the first line of support for customers and is expected to maintain a neat and clean appearance, and to treat all customers with decency and respect. Job Description - • Remove and haul existing garage door., • Installation of new garage doors., • Attend and participate in all required safety meetings and training sessions, • Learn the basics of track alignment, track adjustment, adequate back hangs, operator arm, photo eye setting, and other door and operator repairs, • Learn basic door and operator maintenance skills and review new products when appropriate, • Retain an appropriate level of product knowledge for products offered, • Ensure installation is performed to the customer’s satisfaction and resolve issues or problems, • Review Work Order/Invoice information for accuracy and completeness before departing the job, • Promote Precision Door Service products and services wherever possible, • Ensure truck is fueled, serviced, and ready for operation prior to beginning of workday, • Ensure truck is restocked with appropriate material daily, • Assist in unloading of trucks when requested, • Maintain timecards for compensation, • Perform a variety of secondary support tasks as requested by the Branch ManagerRequirements:, • Must possess a valid driver’s license, • Must be able to pass a standard drug test upon request, • Must have good mechanical aptitude and demonstrated ability to understand and work with common power tools, • Must be able to lift up to 100 pounds and carry for up to 50 feet, • Must be able to read and write legibly and accurately, • Must be able to walk and carry items on uneven ground, • Must be able to climb and work from a 12’ step ladder, • Customer-focused and Customer Service Orientation – Works with clients and customers to assess their needs, provides information or assistance, resolves their problems or satisfies their expectations; knows about available products and services; is committed to providing quality products and services; honors all of the franchise’s commitments to customers by providing helpful, courteous, accessible, responsive, and knowledgeable customer service., • Effective Communications – Practices meaningful two-way communication by speaking clearly, paying close attention and seeking to understand others, listening attentively and clarifying information attending to nonverbal cues, and responding appropriately; influences and ensures support for proposed ideas., • Service Focus and Teamwork – Values and delivers high quality, professional, responsive, and innovative service while cooperating with others to accomplish common goals; works with others within and across the company to achieve shared goals; treats others with dignity and respect and maintains a friendly demeanor; values the contributions of others., • Interpersonal Skills – Shows understanding, friendliness, courtesy, tact, empathy, concern, and politeness to others; develops and maintains effective relationships with others; may include effectively dealing with individuals who are difficult, hostile, or distressed; relates well to people from varied backgrounds and different situations; is sensitive to cultural diversity, race, gender, disabilities, and other individual differences., • Able to work a flexible schedule including weekends, holidays and evenings to accommodate phone calls from customers., • Must be able to sit for extended periods of time (driving and travel time.), • Medium to heavy work – as an installer, must be able to lift up to 100 pounds and carry for up to 50 ft. As well as walk and carry items on uneven ground; and have manual dexterity in both hands, which allows the use of a hand tool., • Talking – expressing and exchanging ideas and advice by means of spoken word. Those activities in which they must convey detailed or important spoken instructions to other workers and customers accurately, loudly, or quickly., • Hearing – perceiving the nature of sounds at normal speaking levels or without correction. Ability to receive detailed information through oral communication and make fine discriminations in sound. Our company's pay period is Sunday through Saturday, with WEEKLY payroll! That means payday is EVERY Friday!

Job Description At Smashburger, we don’t just make burgers—we create crave-worthy moments that keep guests coming back for more. We’re driven by a shared commitment to excellence, working as one team and taking bold action to deliver unforgettable experiences. Here, you’ll be part of a group that works hard and genuinely cares—where passion and dedication matter just as much as skill. At Smashburger, we live by our values: Taste Obsessed – Bring flavor into every shift Premium Experience – Lead Boldly. Deliver Flawlessly Stay Hungry – Literally & Figuratively One Team! One Smash! – Smash Together Do What’s Right – Act with honesty and consistency. If this sounds like your kind of place, we’d love to have you on the team! What You’ll Do As a Cook, you’re at the heart of delivering our signature experience: • Prepare and cook menu items to recipe standards, • Ensure food quality, accuracy, and efficiency, • Work closely with teammates in a fast-paced kitchen, • Maintain cleanliness and food safety standards, • Operate kitchen equipment (grills, fryers, knives), • Follow systems for prep, stocking, and closing, • Support team members and assist in the dining area as neededWhat We’re Looking For, • No experience required—we’ll train you!, • Must be 16 years or older, • Ability to stand for long periods and lift up to 50 lbs, • Comfortable working in a fast-paced, high-heat environment, • Reliable and flexible schedule (nights, weekends, holidays), • Team-oriented with strong communication skills, • Able to follow safety, cleanliness, and company standards Why Join Us? Better Benefits for a Better You: • Earn extra with tip share (up to $2/hr), • 50% off meals, • Flexible, team-friendly schedules, • Referral bonuses, • Medical, dental & vision coverage*, • Paid time off*, • 401(k) match (21+), • Career growth and fast-track opportunities The Company is dedicated to the principles of equal employment opportunity and to providing a professional work environment free from discrimination and harassment. We prohibit unlawful discrimination against applicants, prospective applicants or employees on the basis of any legally recognized basis including but not limited to: race (inclusive of traits associated with race, including but not limited to hair texture and protective hairstyles), sex (including pregnancy, lactation, childbirth or related medical condition), color, religious creed, marital status, national origin or ancestry, age, citizenship status, physical or mental disability, genetic information, sexual orientation, gender, gender identity, gender expression, military or veteran status, status as a victim of crime or abuse, or any other applicable status protected by federal, state, provincial or local law. Our commitment to equal opportunity employment applies to all persons involved in our operations and prohibits unlawful discrimination by any employee, including supervisors and coworkers. We use eVerify to confirm U.S. Employment eligibility.

Job Description Amtec Staffing has partnered with a growing HVAC and mechanical services contractor to find an experienced HVAC Service Technician/Manager to support their expanding service operations. This is an excellent opportunity to join a respected company known for delivering high-quality heating, ventilation, air conditioning, and refrigeration services across commercial and residential projects. HVAC Systems Commercial • Industrial • HVAC Service & Repair • Preventative Maintenance • Mechanical Systems • Refrigeration • Heating & Cooling Systems About the Role: As an HVAC Service Technician, you will be responsible for servicing, maintaining, troubleshooting, and repairing HVAC systems across commercial and residential properties. This role requires a strong technical background in heating and cooling systems, excellent customer service skills, and the ability to work independently in the field while maintaining high standards for safety and quality. Responsibilities • Service & Repair, • Diagnose, troubleshoot, and repair residential and commercial HVAC systems including air conditioning units, furnaces, heat pumps, rooftop units, split systems, and ventilation equipment, • Perform preventative maintenance, inspections, filter replacements, and system tune-ups, • Identify equipment malfunctions and recommend repair or replacement solutions, • Assist with installation and startup of HVAC equipment when needed, • Maintain accurate service records including labor hours, materials used, and follow-up recommendations, • Field Coordination & Customer Service, • Respond to service calls in a timely and professional manner, • Communicate directly with customers regarding system issues, repair recommendations, and preventative maintenance needs, • Coordinate with dispatchers, project managers, and senior technicians to prioritize service requests, • Maintain a clean and organized service vehicle, tools, and equipment, • Ensure all work is completed in accordance with company standards and customer expectations Safety & Compliance • Follow all safety procedures and company policies while working in residential, commercial, and industrial environments, • Work safely around electrical systems, refrigerants, moving equipment, ladders, and confined spaces, • Wear appropriate PPE including gloves, safety glasses, hearing protection, hard hats, and safety boots, • Maintain compliance with EPA regulations, OSHA standards, and local building codes, • Leadership & Professional Development, • Support and mentor junior technicians or apprentices in the field, • Continue to develop technical knowledge through training, certifications, and hands-on experience, • Stay current on HVAC technologies, controls, energy efficiency solutions, and new equipment offerings Qualifications • 5+ years of experience servicing and repairing residential and/or commercial HVAC systems, • Experience with air conditioning units, furnaces, heat pumps, ventilation systems, refrigeration systems, and rooftop units preferred, • Strong troubleshooting and diagnostic skills across mechanical, electrical, and HVAC controls systems Education • High school diploma or equivalent required, • Completion of an HVAC technical program, trade school, or apprenticeship preferred, • EPA Certification required or ability to obtain within a specified timeframe, • Technical Skills, • Knowledge of HVAC systems, refrigerants, electrical components, controls, and preventative maintenance procedures, • Ability to read blueprints, wiring diagrams, and equipment specifications, • Experience using gauges, meters, recovery machines, vacuum pumps, and other HVAC diagnostic tools, • Basic computer skills for work orders, scheduling, and service documentation