Trabajos lift operator en Austin, TexasCrear alertas

Job Description At HVAC RNTL, we move fast—delivering commercial HVAC rental solutions when and where they're needed most. From one-ton spot coolers to large-scale chillers and cooling towers, our team responds with speed and precision, whether it's a planned project or a 24/7 emergency. If you're wired for problem-solving and thrive in a fast-paced environment, you'll fit right in. Our people set us apart—and with locations across the U.S., there's room to grow, take on big challenges, and make an immediate impact. HVAC Installation Technician Reports to: National Service Leader FLSA Status: Non-Exempt The Opportunity We are seeking an HVAC Installation Technician to perform installation of applied equipment and depot maintenance. This is a full-time opportunity for an energetic go-getter. An ideal candidate will be customer service oriented and work well with others. This position requires strong problem solving skills, the ability to prioritize and multitask, along with the ability to work in diverse working conditions. Responsibilities • Perform installation of all applied equipment with direction but limited supervision., • Assist with depot maintenance and testing of applied equipment with supervision., • Assist with depot cleaning and inventory., • Troubleshoot low suction pressure and high discharge pressure diagnostics on applied equipment., • Install and commission cooling towers., • Perform refrigerant leak check on applied equipment., • Complete log sheets on all installed equipment., • Perform condenser coil cleaning on trailer mounted chillers on customer job sites., • Perform tube maintenance on water-cooled chillers., • Navigate chiller control panels to collect data. The Required Profile • High School Diploma or equivalent, • Must have valid driver's license with good driving record, • Must have current HVAC certification and OSHA 10 Training, • Previous experience of 1 to 5 years in chiller/HVAC maintenance, mechanical engineering, or other related fields., • Electrical knowledge required and EPA Certification Preferred (i.e. HVAC Journeyman, Boiler Operator, Gas Installer, etc.), • Strong problem solving and critical thinking skills., • Ability to prioritize and multitask., • Good analytical skills, attention to detail, and ability to train junior technicians., • Excellent customer service skills with desire to exceed customer expectations., • Ability to work independently with minimal supervision in a timely manner, making sure job is done correctly the first time., • Operating knowledge of Microsoft office software and working proficiency with handheld computer (i.e. Smartphone, iPad), • Ability to work in diverse conditions including but not limited to mechanical equipment rooms with exposure to noisy operating equipment, exposure to extreme weather conditions, risk of electrical shock (high voltage), climbing/working at elevated heights, etc., • Must be able to climb, crawl, stoop, kneel and must regularly lift and/or move up to 50 pounds, frequently lift and/or move up to 75 pounds Other Skills & Abilities Language Skills Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Mathematical Skills Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret graphs. Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Mental stamina for problem solving and prioritizing multiple tasks. Environmental Requirements Will be required to work in a field environment, multiple customer sites on a daily basis. Physical Demands While performing the duties of this job, the employee is regularly required to use hands to operate computer keyboard reach with hands and arms. The employee frequently is required to stand, walk, and sit. The employee is continually required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 50 pounds, frequently lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. NOTE: This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization. HVAC RNTL is an Equal Opportunity Employer Employment practices will not be influenced or affected by an applicant's or employee's race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Reasonable accommodations will be made for qualified individuals with disabilities unless doing so would result in an undue hardship. Salary ranges listed are dependent upon a candidate's qualifications, experience, internal equity, and the budgeted amount for the specific role and location.

Job Description At HVAC RNTL, we move fast—delivering commercial HVAC rental solutions when and where they're needed most. From one-ton spot coolers to large-scale chillers and cooling towers, our team responds with speed and precision, whether it's a planned project or a 24/7 emergency. If you're wired for problem-solving and thrive in a fast-paced environment, you'll fit right in. Our people set us apart—and with locations across the U.S., there's room to grow, take on big challenges, and make an immediate impact. Lead HVAC Mechanic Reports to: National Service Leader FLSA Status: Non-Exempt The Company From a single spot cooler, to a fully-customized chiller system, and everything in between – HVAC RNTL delivers the results our partners need when and where they need them. Whether it's a planned shutdown or 24/7 emergency services, our expert rental specialists work with customers every step of the way to get their HVAC system back up and running. Our team is growing – and we're looking for fast-thinking problem solvers who are unrelentingly responsive and thrive in an ever-changing environment. With locations across the US, our people are what set us apart from the competition and our team is constantly seeking to add talented individuals. Interested in joining us? The Opportunity We are seeking an experienced Lead HVAC Mechanic with advanced technical skills and the ability to layout and install applied HVAC equipment independently, with little to no direction. The Lead HVAC Mechanic will supervise a team of installation technicians on customer job sites while performing maintenance, testing and repairs of applied equipment. The position requires a high level of correspondence with Project Managers, Service Coordinators and customers. Responsibilities • Ability to layout and install applied HVAC equipment independently, with little to no direction., • Supervise team of installation technicians on customer job sites., • Perform startup of applied equipment and complete log sheet after completion of startup., • Communicate directly with end user customers on installation and startup of applied equipment with the ability to answer customer questions as needed., • Perform depot maintenance, testing and repairs including refrigerant removal, evacuation, system charging and refrigerant piping leak repairs., • Perform limited electrical troubleshooting while following all lockout/tagout and PPE procedures., • Ability to read and use wiring diagrams to point out all components and use meter to confirm all input and output voltages., • Collect superheat and sub-cooling data on all applied equipment., • Navigate equipment control panels using keypad to start/stop, reset and change setpoints on all applied equipment., • Ability to lead a team of installers on a multiple chiller application. The Required Profile • High School Diploma or equivalent, • Must have valid driver's license with good driving record, • Must have current HVAC certification and OSHA 10 Training, • Previous experience of 5+ years in chiller/HVAC maintenance, mechanical engineering, or other related fields., • Electrical knowledge required and EPA Certification Preferred (i.e. HVAC Journeyman, Boiler Operator, Gas Installer, etc.), • Familiarity with manufacturing designs or schematics., • Strong problem solving and critical thinking skills., • Ability to prioritize and multitask., • Good analytical skills, attention to detail, and ability to train junior technicians., • Excellent customer service skills with desire to exceed customer expectations., • Ability to work independently in a timely manner, making sure job is done correctly the first time., • Operating knowledge of Microsoft office software and working proficiency with handheld computer (i.e. Smartphone, iPad), • Ability to work in diverse conditions including but not limited to mechanical equipment rooms with exposure to noisy operating equipment, exposure to extreme weather conditions, risk of electrical shock (high voltage), climbing/working at elevated heights, etc., • Must be able to climb, crawl, stoop, kneel and must regularly lift and/or move up to 50 pounds, frequently lift and/or move up to 75 pounds, • Ability to work independently with minimal supervision and balance requirements of multiple and varied duties Other Skills & Abilities Language Skills Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Mathematical Skills Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret graphs. Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Mental stamina for problem solving and prioritizing multiple tasks. Environmental Requirements Will be required to work in a field environment, multiple customer sites on a daily basis. Physical Demands While performing the duties of this job, the employee is regularly required to use hands to operate computer keyboard reach with hands and arms. The employee frequently is required to stand, walk, and sit. The employee is continually required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 50 pounds, frequently lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. NOTE: This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization. HVAC RNTL is an Equal Opportunity Employer Employment practices will not be influenced or affected by an applicant's or employee's race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Reasonable accommodations will be made for qualified individuals with disabilities unless doing so would result in an undue hardship. Salary ranges listed are dependent upon a candidate's qualifications, experience, internal equity, and the budgeted amount for the specific role and location.

Job DescriptionDescription: Who We Are At Poolie, we started with a simple goal: make pool maintenance reliable, professional, and hassle-free. From day one, our mission has been to raise the bar in pool service, combining expertise, integrity, and a commitment to customer satisfaction. Today, we’re one of the fastest-growing pool service companies in the area, trusted by hundreds of residential and commercial customers. Our team is built on collaboration, respect, and pride in a job well done, and we believe that when our people succeed, our customers do too. What We Offer • Competitive Pay: $16–$23/hour based on experience and expertise, 40 hours per week guaranteed!, • Full Benefits Package: Health, dental, and vision insurance, short & long-term disability, PTO, and 10 paid holidays, • Career Growth: Clear paths to Lead Tech, Trainer, or Supervisor roles, • Paid Training & Certifications: Paid on-the-job training and certifications like CPO, • Supportive Team Environment: We set you up for success from Day 1, • Job Perks: Take home truck after training completion (Includes gas card) Schedule • Full-time: Monday to Friday, 8:00 AM – 5:00 PM, • In-office start and end at your assigned branch location What You’ll Do As a Pool Maintenance Technician, you’ll be responsible for keeping our customers’ pools clean, safe, and functioning at their best. This includes: Pool Maintenance & Equipment Care • Service a daily route of residential and/or commercial pools (50–60 per week), • Skim, vacuum, brush, and clean pool surfaces and floors, • Test and balance water chemistry (chlorine, pH, alkalinity, etc.), • Maintain filters, pumps, baskets, and other basic equipment, • Inspect and confirm the function of pool equipment (heaters, lights, motors, etc.), • Diagnose and perform minor repairs (bags, baskets, o-rings), • Report major issues to your Supervisor and assist with troubleshooting Customer Service & Communication • Greet customers professionally and answer basic pool care questions, • Provide updates on service performed and note any recommendations, • Educate customers on basic maintenance practices to keep their pool in top condition Safety & Compliance Follow all safety protocols when handling chemicals and equipment Use proper protective gear (goggles, gloves, etc.) Maintain compliance with company and industry standards Join Us! If you’re ready to grow your skills, work with a supportive team, and keep pools in perfect shape, we’d love to hear from you. Apply today and dive into a career that makes a splash! Requirements: What We’re Looking For Must-Haves: • Valid driver’s license with authorization to operate a motor vehicle, • Comfortable working outdoors in all weather conditions, • Able to lift 50 lbs and perform repetitive movements, • Comfortable using a smartphone or tablet for work tasks Nice-to-Haves: • Previous pool service or outdoor maintenance experience, • Certified Pool Operator (CPO) license, • Familiarity with pool equipment and repairs

Job Description Pay: $18.00 - $20.70 per hour Job description: Production Operator – Semiconductor Manufacturing Location: Southeast Austin, TX 78741 Pay: $18.00/hr day shift $20.70/hr night shift We are hiring Production Operators to support a semiconductor manufacturing facility in Southeast Austin. This is a great opportunity for reliable, detail-oriented candidates who are comfortable working in a cleanroom environment, following procedures, and supporting production in a fast-paced manufacturing setting. Schedule Options: A Shift – Days Sunday, Monday, Tuesday, every other Wednesday 7:00 AM – 7:00 PM Pay: $18.00/hr B Shift – Nights Sunday, Monday, Tuesday, every other Saturday 7:00 PM – 7:00 AM Pay: $20.70/hr C Shift – Days Thursday, Friday, Saturday, every other Wednesday 7:00 AM – 7:00 PM Pay: $18.00/hr D Shift – Nights Wednesday, Thursday, Friday, every other Saturday 7:00 PM – 7:00 AM Pay: $20.70/hr Hours: • Compressed 12-hour shift schedule, • Short week: 3 days / 35.25 total hours, • Long week: 4 days / 47 total hours, including overtime, • Overtime paid at time and a half, • Additional overtime may be available after training Job Responsibilities: • Work in a fast-paced semiconductor manufacturing environment while maintaining strong attention to detail and quality, • Set up, operate, and coordinate workstation activities in a wafer manufacturing or test area, • Perform repetitive machine operations including loading, unloading, and pushing materials or equipment as needed, • Monitor manufacturing processes and equipment to support quality production output, • Follow cleanroom procedures, safety guidelines, and production standards, • Work with team members to solve problems and support daily manufacturing goals, • Participate in continuous improvement efforts within the production team, • Assist with training other employees as needed Requirements: • Must be 18 years or older, • Must have a high school diploma or GED, • Must be able to complete a background check, drug test, and physical, • Must be comfortable working in a cleanroom environment, • Must be able to wear a full cleanroom suit from head to toe, • Must be able to lift 5–8 lbs repeatedly, • Must be able to work a compressed schedule alternating between 3 and 4 consecutive 12-hour shifts each week, • Must be dependable, punctual, and able to follow detailed instructions Apply now and one of our recruiters will reach out to you! Balance Staffing is proud to be an equal-opportunity workplace. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, Veteran status, or any other characteristic protected by federal or state law. Benefits: • Dental insurance, • Health insurance, • Vision insurance Work Location: In person Company DescriptionBalance Staffing is proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, Veteran status, or any other characteristic protected by federal or state law.Balance Staffing is proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, Veteran status, or any other characteristic protected by federal or state law.

Job DescriptionCompany description Terry Soot Management Group (TSMG) is a field data collection company founded in 2017 in Europe. We collect data where automation is not possible. We count features, take pictures, make videos, record speech, and scan areas for every detail you need to make more informed decisions. Our field data collection teams are spread across Europe and North America, ready to accept new challenges. Role Overview:The Autonomous Vehicle Test Operator is responsible for operating and evaluating a self-driving vehicle in autonomous mode, including collecting data and providing feedback, and offering ride hail service to the general public.Eligibility: • Must be at least twenty-one (21) years old, possess a valid Class C driver’s license, and have at least three (3) years of experience as a Class C licensed driver to operate Class C vehicles.Key responsibilities:, • Operate/Drive autonomous vehicles on both defined and undefined routes, including a variety of environmental conditions - driving (some manual driving but primarily monitoring the vehicle's behavior in autonomous mode) and (ii) software monitoring and logging responsibilities and providing verbal feedback/directions about the autonomous vehicles (AV) environment., • Test other aspects of our autonomous vehicles, • Complete timely and detailed ride reports for our operations and engineering teams, • Must be able to work specific shifts, including early mornings, evenings, and/or weekends, as well as overnight shifts, • Maintain high standard of safety, inside and outside of the vehicle.Necessary skills:, • Proficiency with a laptop and Office apps (i.e., Gmail, Sheets and Docs), • Proficiency using a handheld device/touchscreen smartphone, • Must have good attention to detail and be able to quickly and concisely describe their thoughts.Physical requirements:, • Occasional standing, walking, and long periods of sitting., • Use hands to finger; handle or feel; and talk or hear; climb stairs and/or ladders., • Occasionally required to reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl., • Must be able to occasionally lift and/or move up to 45 pounds., • Must use close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus., • Most work is accomplished outdoors in a vehicle.We would be happy to get to know you and your skills better and see how we can support each other's growth. Please apply and let's meet! We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Position Summary At UPLIFT Desk, we’re not just building ergonomic workstations—we’re shaping how people work and live. As the ecommerce industry leader in height-adjustable desks, we’ve grown by delivering innovative, customer-focused solutions that promote health, productivity, and well-being. Our success is rooted in our core values: Customer Obsession, Innovation, Accountability, and Results Oriented. As a Warehouse Forklift Operator, you will be primarily responsible for safely operating Crown extended-reach trucks to move, store, and retrieve inventory throughout our Ferguson warehouse. This includes placing and retrieving pallets from rack locations approximately 32 feet high and working within double-deep and quad-deep racking systems. Although forklift operation is the primary responsibility, this is not a forklift-only position. Successful team members are willing to support all warehouse operations as business needs require, including picking, shipping, loading and unloading containers and trailers, manually handling products, cleaning, organizing, and completing other warehouse-related tasks. We are looking for an experienced operator who values safety, accuracy, reliability, flexibility, teamwork, and a positive attitude. What You'll Bring Minimum of two years of recent reach-truck operating experience in a warehouse or distribution environment. Recent experience operating Crown extended-reach trucks and safely placing and retrieving pallets from rack locations approximately 32 feet high. Experience operating within double-deep and quad-deep racking systems. Strong commitment to safety, accuracy, dependable attendance, teamwork, and proper equipment operation. Ability to lift up to 50 pounds, remain on your feet throughout an eight-hour shift, and perform general warehouse duties as needed, including picking, shipping, unloading containers, product handling, cleaning, and organizing. Bonus Points For Current forklift certification. Experience operating sit-down forklifts and cherry pickers. Experience using RF scanners or warehouse inventory systems. Experience working in a high-volume distribution or manufacturing warehouse. Experience loading and unloading trailers and shipping containers. What You’ll Do Safely operate Crown extended-reach trucks to transport, store, and retrieve inventory throughout the warehouse. Safely place and retrieve pallets from rack locations approximately 32 feet high within double-deep and quad-deep racking systems. Load and unload trailers and shipping containers while maintaining product accuracy and minimizing damage. Move and stage pallets between receiving, storage, picking, and shipping locations. Replenish warehouse inventory to support daily picking and shipping operations. Pick, stage, and prepare products for shipment based on operational needs. Perform daily forklift inspections and promptly report equipment or safety concerns. Follow OSHA and company safety procedures at all times. Maintain clean, organized, and safe pallet locations, aisles, equipment, and work areas. Perform manual product handling, cleaning, organizing, and any other warehouse-related duties assigned by leadership. Assist warehouse leadership in maintaining an efficient flow of inventory throughout the facility. Benefits A merit-based environment that rewards growth and accomplishment regardless of seniority Generous paid time off 4% 401K company matching with instant vesting (after one year) Excellent group health insurance available to employees and dependents, including domestic partners (medical plan, 2 dental plans, and a vision plan to choose from) Flexible spending account (FSA) for health care and child care costs Company-paid & Supplementary Life Insurance; Long-term & Short-term disability Free UPLIFT Desk (after one year) 50% discount on all UPLIFT products Free healthy (and not so healthy) snacks and drinks On-the-job training and skills development A supportive and engaging work culture that promotes healthy living Position Details Compensation: $21.00 + DOE Type: Full-time Employee Status: Regular Work Schedule: Monday - Friday, 8am-5pm, 40 hours per week Location: Austin, Texas About UPLIFT Desk As a fast growing, mid-sized Direct To Consumer (DTC) brand company, it’s our mission to deliver sincere, world-class customer service. We provide optimally designed, quality office solutions to customers. We focus on happier & healthier customers and employees! UPLIFT Desk has revolutionized the way people shop for office furniture. It all starts with our award winning UPLIFT Standing Desk, made even better when accessorized with our entire UPLIFT office furniture line. Our product line includes most furniture an office could need. We design office products that optimize customers’ comfort, health, and productivity. Our Product Development team focuses on designing the highest quality ergonomic office furniture. Then our Content team's ecommerce website offers customers the ability to configure products specifically to their needs. Our amazing Order Processing and Warehouse teams make sure we have inventory and ship orders the same day. Customers receive award winning support from our Sales and Customer Service and Warranty teams. We offer the best 15 year warranty in the business! Our Interior Design and Contract Sales teams specialize in large office furniture layouts for commercial buildings that serve most Fortune 500 companies. Award winning UPLIFT Desk is loved globally! Rated Best Standing Desk by New York Times Wirecutter 9 years in a row Hundreds of thousands of happy customers around the world sit and stand at an UPLIFT Desk Google reviews - 4.9 rating with thousands of reviews We value our environment: We plant 5 new trees in U.S. National Forests for every solid wood desk sold. By partnering with the National Forest Foundation, we're able to plant tens of thousands of new trees each year Solar powered operations: Our Austin facilities produce over a megawatt of electricity through roof-mounted solar panels on three large warehouses We use sustainable materials in our products. Some examples are: Bamboo Desktops, Drawers, & Motion Boards: The world's fastest-growing plant, Moso bamboo is a grass that grows as quickly as an inch an hour Eco Curve Desktops: Eco Curve desktops use 100% recycled MDF and have the lowest carbon footprint in the industry due to not using edgebanding, backer boards, adhesives, or solvents Rubberwood Desktops: Pará rubber trees produce 99% of the world's natural rubber latex. The rubber production lifespan of these trees is exhausted after about 25-30 years. Our rubberwood desktops give the trees a second life Equal Opportunity Employer (EEO) UPLIFT Desk believes in building an organization whose staff reflects the true diversity of our community. We hire, promote, and reward employees based on results and professional performance. UPLIFT Desk provides equal employment opportunities to all employees and applicants without regard to religion, sex, age, sexual orientation, gender identity, race, creed, color, national origin, alienage or citizenship status, marital status, partnership status, ancestry, disability, or veteran status. To all recruitment agencies: We do not accept agency resumes. UPLIFT Desk is not responsible for any fees related to unsolicited resumes. #UPDHP

Job DescriptionDescription: Athena Manufacturing, LP is a career-minded company that cares about our employees and their success. We invest in all employees by providing the training and skills they need to not only be successful in their occupation but also the opportunity to grow and advance within the company. Overview: Laser Operator I, manage the CNC laser cutting machine and support the production team by assembling parts, operating machinery, bending, punching or sawing of metal products as instructed by supervisors. Perform as general operator on a laser machine. Operate the CNC laser cutting machine and other machinery used in the production process, or assist other machine operators. Select and set up lenses based on material type and thickness, load programs and set machine parameters to ensure optimal performance of the equipment. Key Responsibilities: (include but not limited to): Essential duties and functions, pursuant to the Americans with Disabilities Act, include and are not limited to the following: • Work in a fast paced environment with fast changing priorities, • Keep work area clean and organized., • Provide a great level of attention to detail and focus on the given task., • Follow all company rules and policies., • Follow all safety rules and quality standards., • Work with team members to maximize productivity and efficiency, • Documents completion of work or inspection operations on travelers., • Performs set-up and first piece / cut inspections., • Coordinates with department manager to ensure work scopes are accurately defined., • Performs periodic maintenance to equipment in accordance with QMS procedures., • Records set-up and run time data into M2M system., • Handles material in accordance with QMS procedures., • Identifies cost reduction and productivity improvement opportunities to supervisor., • Knowledge about shield gases used during laser cutting operation., • Monitor fill level of bulk tank system and report reordering levels to the supervisor., • Work with automated storage system., • Assemble items as instructed by shift leader or floor supervisor., • Prepare product for shipment., • Lift raw materials, final products, and items packed for shipment, manually, or using hoist., • Operate machinery used in the production process, or assist machine operators., • Uphold all ISO and OSHA standards applicable to the responsibilities above. Requirements: Qualifications: Minimum Preferred Qualifications, pursuant to the Americans with Disabilities Act, include and are not limited to the following: • High School diploma or equivalent plus 2 years of related experience. One year of related experience may substitute for one year of education up to a maximum of 4 years., • 2+ years of experience on Trumpf, Amada or similar CNC laser cutting machines (TruDisk/TruFlow preferred)., • High school diploma or GED is preferred., • Solid background working with sheet metal. PHYSICAL REQUIREMENTS: Essential physical requirements pursuant to the Americans with Disabilities Act, include and are not limited to the following: • Strength — (Heavy)- Exert up to 100 lbs. of force occasionally, and/or up to 50 lbs. of force frequently, and/or up to 20 lbs. of force constantly to move objects., • Movement- climbing, balancing, stooping, kneeling, crouching, reaching, handling, twisting, bending, • Auditory- talking and hearing, • Vision-near acuity, far acuity, depth perception, color vision, field of vision, • Environment conditions and physical surroundings-noise, vibration, atmospheric conditions PREFERRED TOOLS AND TECHNOLOGY: • Personal computers, • Comfortable with Technology, open to learning/coachable, • Made2Mange (M2M and SFM), • Warehouse and inventory systems REQUIRED WORK CLOTHING AND PPE: Attire should not interfere with job performance or safety. • Safety glasses are provided by Athena, • Closed toe safety shoes are required Athena Manufacturing supports commercial, aerospace, and government customers and is committed to maintaining compliance with applicable information security, export control, and government contract requirements, including the Cybersecurity Maturity Model Certification (CMMC) program. Certain roles may require access to controlled information, systems, or programs that are subject to U.S. government regulations, including export control requirements. As a result, access to specific work, systems, or data may be restricted to individuals who meet applicable regulatory eligibility requirements, including U.S. Person requirements as defined by federal regulations. Eligibility for such access will be determined prior to assignment and may be re-evaluated as business or regulatory needs change At Athena Manufacturing, we are dedicated to fostering a culture of continuous improvement through the principles of 2 Second Lean. This approach encourages all team members to identify and implement small, daily improvements that streamline processes, reduce waste, and enhance overall efficiency. We believe that by empowering our employees to take ownership of their workspaces and share their ideas, we can drive innovation, increase productivity, and create a more enjoyable work environment for everyone. Join us as we strive to improve every day, 2 seconds at a time!

Job DescriptionCompany description Terry Soot Management Group (TSMG) is a field data collection company founded in 2017 in Europe. We collect data where automation is not possible. We count features, take pictures, make videos, record speech, and scan areas for every detail you need to make more informed decisions. Our field data collection teams are spread across Europe and North America, ready to accept new challenges. Role Overview: The Autonomous Vehicle Test Operator is responsible for operating and evaluating a self-driving vehicle in autonomous mode, including collecting data and providing feedback, and offering ride hail service to the general public. Eligibility: • Must be at least twenty-one (21) years old, possess a valid CDL driver’s license, and have at least three (3) years of experience as a Class C licensed driver to operate Class C vehicles.Key responsibilities:, • Operate/Drive autonomous vehicles on both defined and undefined routes, including a variety of environmental conditions - driving (some manual driving but primarily monitoring the vehicle's behavior in autonomous mode) and (ii) software monitoring and logging responsibilities and providing verbal feedback/directions about the autonomous vehicles (AV) environment., • Test other aspects of our autonomous vehicles, • Complete timely and detailed ride reports for our operations and engineering teams, • Must be able to work specific shifts, including early mornings, evenings, and/or weekends, as well as overnight shifts, • Maintain high standard of safety, inside and outside of the vehicle.Necessary skills:, • CDL Driver's License, • Proficiency with a laptop and Office apps (i.e., Gmail, Sheets and Docs), • Proficiency using a handheld device/touchscreen smartphone, • Must have good attention to detail and be able to quickly and concisely describe their thoughts.Physical requirements:, • Occasional standing, walking, and long periods of sitting., • Use hands to finger; handle or feel; and talk or hear; climb stairs and/or ladders., • Occasionally required to reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl., • Must be able to occasionally lift and/or move up to 45 pounds., • Must use close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus., • Most work is accomplished outdoors in a vehicle. We would be happy to get to know you and your skills better and see how we can support each other's growth. Please apply and let's meet! We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Shifts: M-F 6:00am - 2:30pm // 2:00pm - 10:30pm // - 10:00pm - 6:30am. Compensation: $14 - $15 // $15 – $16 // $15.50 – $16.50 - DOE POSITION SUMMARY To assist in the operation of various machinery to produce specific products in accordance with specs, instructions, measurements or prototypes. A degree of skill, technique and mechanical knowledge is required. May be assigned to different types of machines as production needs require. KEY RESPONSABILITIES • Load and unload materials onto or into machine by pushing, pulling, lifting, or stacking, either by hand or with equipment provided., • Move products, tools, pumps, hoses etc. to operate machines., • Inspect material during production run and report defective materials or questionable conditions to the lead operator., • Responsible for the functionality of the assigned coating station by maintaining mix level and pump pressure, rod speed and replacing filter bags as needed, • Relate with all co-workers in congenial manner., • Maintain the work area and equipment in a clean and orderly condition., • Always follow prescribed safety regulations., • Assist the team in cleaning machines, tools and department, • Other duties may be assigned to meet business needs., • Support the Lead/Supervisor in line operations, inspection activities, and demonstrate initiative in continuous learning and skill development., • Always maintain cleanliness of the department and all equipment., • Other duties may be assigned as business demands. QUALIFICATIONS KNOWLEDGE AND SKILLS • Basic comfort with mechanical applications to become familiar with basic machine functions., • Ability to apply common sense understanding to carry out simple one or two step instructions., • Must read and follow written instructions and add and subtract simple fractions., • Ability to work independently or in teams while maintaining a favorable working relationship with other company employees. EDUCATION Graduation from high school or GED equivalent preferred. One (1) year relevant experience or any equivalent combination of education and experience that demonstrates the ability to do the job. PHYSICAL DEMANDS • Regularly required to stand, stoop, kneel and/or crouch., • Capable to lift or move 50 lbs., • Occasionally required to climb or balance., • Ability to use hands to finger, handle or feel objects, tools or controls: reach with hands and arms; stoop, kneel, or crouch. WORKING CONDITIONS The work is performed in a warehouse temperature-controlled environment. Workers are regularly exposed to dust, odor and noise. The employee works with moving mechanical parts and machinery. BENEFITS • Medical, dental, and vision coverage., • 401(k) retirement plan., • Paid holidays and generous PTO., • Career growth and promotional opportunities., • And much more! The Marco Group is an equal-opportunity employer and complies with all applicable federal, state, and local non-discrimination laws. We provide equal employment opportunities regardless of race, color, religion, sex, national origin, age, disability, marital status, sexual orientation, gender identity, genetic information, military/veteran status, or any other protected status. If you believe you have been discriminated against or have concerns about our compliance, please contact our Human Resources department.

Job Description Full job descriptionJob Title Tow Operator — 1099 (Independent Contractor) — Overnight Shift (7:00 PM–7:00 AM) Company & Location Parking & Towing Enforcement — Austin, TX Job Type Contract (1099 Independent Contractor) Overview Parking & Towing Enforcement is looking for professional and dependable tow truck operators to handle roadside assistance calls and private property impounds (PPI). This role is well-suited for individuals who are comfortable operating commercial vehicles, and providing professional service in fast-paced environments. If you’re calm under pressure, safety-minded, and documentation-focused, we’d like to connect. Responsibilities • Conduct private property impounds in accordance with state law and property authorization, • Safely load and secure vehicles; use dollies and required safety equipment, • Complete required photos and service documentation, • Communicate professionally with dispatch, motorists, property staff, and law enforcement when needed, • Identify vehicle makes, models, drivetrains, license plates, and VINsPay, • Training pay (no towing experience): $100 per day, • Earning potential after training: $70,000 – $110,000 per year, based on per-vehicle pay, • Weekly payoutsSchedule, • Overnight shift: 7:00 PM – 7:00 AM, • Weekends/holidays as neededRequirements, • Valid Texas Driver License, • Clean driving record within the last 5 years, • Ability to pass initial drug screening and random drug testing, • Ability to pass state background checks conducted by law enforcement, • Experience driving trailers, box trucks, or other commercial vehicles, • Ability to pass required state tow operator license exam (training provided), • Must pass a towing skill test (hookups, dollies, clear and consistent documentation), • Able to lift 75 lbs and work outdoors at night, • Basic knowledge of vehicles including makes, models, and drivetrains, • Ability to work overnight hours reliablyPreferred, • Veterans are encouraged to apply, • Bilingual (English/Spanish), • Prior towing or roadside assistance experience is a plus but not required, • TDLR Tow Operator License (Private Property / Incident Management)Training & Licensing, • Paid training provided, • Licensing exam preparation providedJob Types: Full-time, Contract Pay: $70,000.00 - $110,000.00 per year Benefits: • On-the-job training, • Opportunities for advancement, • Paid trainingApplication Question(s):, • Have you had any accidents or traffic violations within the past 5 years?License/Certification:, • TDLR Private Property or Incident Management License (Required)Shift availability:, • Overnight Shift (Required)Ability to Commute:, • Austin, TX 78744 (Required)Work Location: In person

Job Description Join Adecco and elevate your career as a Forklift Operator / Material Handler in a dynamic warehouse environment in Austin, TX. We are seeking experienced professionals who are dedicated to safety, accuracy, and team collaboration to keep our operations running smoothly. This is an excellent opportunity to develop your skills while earning competitive pay: $22.00–$27.60/hour (based on experience). About the Role As a vital part of our warehouse team, you will operate powered industrial vehicles (PIV), manage inventory with precision, and support daily operations with your expertise. Your commitment to safety and efficiency will ensure the success of our logistics processes. Responsibilities: Safely operate forklifts, wire-guided trucks, and order pickers to move, store, and stage materials for inbound and outbound shipments. Utilize RF scanners and handheld devices to process and track inventory, maintaining detailed and accurate records. Perform cycle counts and assist with physical inventory audits to ensure inventory accuracy. Operate equipment at heights up to 30 feet, adhering to all safety protocols. Maintain a clean and organized work area, supporting overall warehouse operations. Assist with general warehouse tasks as needed, contributing to a collaborative team environment. Qualifications: High School Diploma or GED. Minimum of 2 years forklift operating experience. Certified PIV operator (including forklifts, wire-guided trucks, and order pickers). Proficient in using RF scanning devices. Strong attention to detail and a focus on safety. Ability to perform repetitive warehouse duties while standing/walking/carrying/reaching/pushing/pulling for approximately 80%–95% of the shift Ability to lift up to 35 lbs. independently and up to 75 lbs. with team assistance Ability to safely work at heights up to 30 feet Must be able to work independently and as part of a team. Work Schedules & Shifts We offer flexible shift options to fit your lifestyle: 12-hour shifts: 1A (Days): 6:00 AM – 6:30 PM, Sunday–Tuesday and alternating Wednesday 1B (Days): 6:00 AM – 6:30 PM, Thursday–Saturday and alternating Wednesday 2A (Nights): 6:00 PM – 6:30 AM, Sunday–Tuesday and alternating Wednesday 2B (Nights): 6:00 PM – 6:30 AM, Thursday–Saturday and alternating Wednesday Traditional shifts (8–10 hours): Day Shift: Start times between 5:00 AM and 9:00 AM Swing Shift: Start times between 1:00 PM and 5:30 PM Night Shift: Start times between 6:00 PM and 9:00 PM Traditional shifts are Monday–Friday, with occasional weekend work as needed. Mandatory overtime may be required based on business needs. Why Choose This Opportunity? Competitive pay based on experience: $22.00 to $27.60/hour Multiple shift options to match your availability Opportunity to develop your warehouse skills in a safety-focused environment Supportive team culture that values accuracy and teamwork If you’re a seasoned forklift professional seeking a reliable, rewarding position in Austin, apply today with Adecco. Take the next step in your career and join a company that values your skills and dedication! Pay Details: $22.00 to $27.60 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.adecco.com/en-us/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description About Circular Services: Circular Services is a leading developer and operator of circular economy infrastructure and services and the largest private recycling company in the U.S. with operations across the country. We help businesses and municipalities reduce and divert waste, lowering disposal costs and fueling local supply chains by ensuring materials are recovered, recycled, and reused. About the Role: We are seeking a skilled and dedicated CDL Class A Truck Driver to join our team. Shift: M-F, Occasional Saturday's 3am-2pm, 5am-3pm (Job Type: Full-Time) | Location: Austin, TX Benefits: • Health, Dental, Vision insurance, • FSA, • Vacation Time, • 401k matching, • Employee Assistance Program, • Paid Parental Leave, • Tuition Reimbursement Responsibilities: Reasonable accommodation may be made to enable individuals with disabilities to perform these essential functions. • Operate vehicle in accordance with OSHA and DOT requirements, as well as all local, state and federal laws, • Operate and drive different types of trucks, including tanker trucks, roll-off trucks, flatbeds, and tractor-trailers, • Conduct pre-trip and post-trip inspections of vehicles to ensure safety and compliance with regulations, • Plan routes effectively to ensure timely delivery of goods while adhering to traffic laws, • Maintain accurate records of deliveries, vehicle maintenance, and fuel usage, • Communicate with dispatchers regarding delivery schedules and any issues encountered on the road, • Ensure compliance with all local, state, and federal transportation regulations Minimum Job Qualifications: • A valid Class A Commercial Driver’s License, • Must be 21 years of age, • At least three (2) years of experience, proven experience in commercial driving with a valid Class A Commercial Driver's license, • Successfully complete pre-employment DOT drug screen, physical and 7-year background check, which will include previous employment check, criminal history and motor vehicle review, • Must be able to verify and maintain accurate daily records, • Be able to lift up to 65 lbs. and push/pull 200 lb. recycling containers Other Duties: All job requirements in this job description provided indicate the minimum level of knowledge, skills, and/abilities deemed necessary to perform the job competently. Job descriptions are an overview of the duties, responsibilities, and requirements of the position. Employees may be required to perform other job-related assignments as requested. Working Conditions and Physical Requirements:

Job DescriptionDescription: COTA Grounds Landscaper (Seasonal - Part Time) Circuit of The Americas (COTA) is a 365-entertainment destination for world-class events located in Austin, TX. The sports and entertainment portfolio at COTA is unmatched in the country with Formula 1 US Grand Prix, NASCAR and MotoGP attracting global fans during championship races on the famed Circuit and Live Nation producing over 30 headline concerts every year at the Germania Insurance Amphitheater. Opening in 2026, COTA’s amusement park is a 20-acre theme park featuring two first of their kind Roller Coasters and over three dozen rides. Job Description: The Seasonal Part Time COTA Grounds Landscaper performs semi-skilled work in the maintenance, care, and modification of COTA’s Campus grounds and landscapes, which includes the operation of electrically powered and gasoline-powered groundskeeping equipment and machines, and the use of small hand and power tools or equipment in planting, cultivating, and trimming grounds and landscaping. The Landscaper also performs maintenance on groundskeeping equipment and tools and makes minor repairs (within demonstrated capability) as directed. Additionally, the Landscaper assists as needed to: changes light bulbs, paints walls, woodwork, furniture, and equipment, makes minor carpentry, plumbing, and electrical repairs, delivers supplies, materials, and equipment as needed, retrieves and documents transfer of accountability of surplus property, provides custodial services, etc. The position requires the use of power equipment, small to large maintenance equipment, as well as large machinery. This is a Seasonal Part-Time on Campus position, Monday through Friday with weekends as needed. Requirements: Requirements & Essential Functions: • Performs tasks common to the care of grounds and landscapes by seeding, watering, mulching, fertilizing, and applying chemicals to outside plantings, lawns and turf, as well as inside flowers and cuttings used in transplanting; inspecting plant materials for insects, disease, physical and mechanical damage and identifying replacements; transplanting, pruning, trimming, and cultivating trees, shrubs, ground cover, and flowers; and storing and caring for bulbs and cuttings in the winter season., • Performs regular and directed grounds and landscape maintenance by mowing lawns with riding or push mowers; trimming and edging around trees, shrubs, ground cover, flowers, sidewalks, and buildings; weeding, thinning, and cleaning flower beds and other grounds by hand or utilizing proper tools and equipment; and setting up, adjusting, repairing, and cleaning irrigation systems., • Provides a record of grounds and landscape watering and chemical spraying by keeping daily logs of areas watered and duration of watering and the application of chemicals, including areas sprayed, amount and type of chemicals used, substances sprayed and reason, and the wind speed and direction at time of spraying., • Performs campus-wide general maintenance and repairs by installing, removing, repairing, and maintaining landscape lighting, parking meters, signs, cables, chains, barricades, gates, bicycle racks, feeders, posts, fences, and rock walls; and repairing streets, parking lots, and omni turf, as applicable., • Removes unsightly trash and debris from public areas by regularly inspecting grounds, drains, utility hole covers, etc., for debris; raking, sweeping and bagging leaves, debris, dirt and trash from streets, sidewalks, parking lots, tunnels, and transporting the trash to designated central collection points daily., • Reduces the likelihood for the spread of diseases and unsightly appearance of trash containers in public areas by emptying, cleaning, and disinfecting trash and cigarette receptacles on a regular basis, and removing, repairing, and installing trash and cigarette receptacles on COTA’s property on an as needed basis., • Assists in preventing accidents resulting from snow- or ice-covered walkways by removing mowing decks and installing snow removal equipment on riding mowers and tractors; operating snow blowers, tractors or mowers with blades and using shovels to remove snow and spread sand, chat, and salt on snow- or ice-covered surfaces., • Prepares outdoor locations for use by visitors, vendors, and the public as needed by campus operations and, if applicable, painting and marking athletic fields, moving bleachers, and seating, and erecting portable goals or other athletic equipment., • Applies chemicals used in groundskeeping (horticulture, turf management, and floriculture) properly and safely by wearing prescribed protective clothing, masks, and/or rubber gloves and boots, following either written or verbal directions for mixing chemical compounds according to specifications, applying the chemicals properly on grounds and landscapes designated for their use, and disposing of residual chemical products as directed or storing and labeling them for future use., • Safely operates light vehicles such as pick-up trucks, tractors, street sweepers or riding mowers and portable power tools and equipment such as saws, grass trimmers, snow/leaf blowers, sprayers, paint machines and other groundskeeping equipment by obeying applicable traffic laws and following operator instructions, and wearing appropriate safety items such as goggles, gloves, or other appropriate protective clothing., • Ensures that ground maintenance equipment and building maintenance equipment are operational by performing routine and preventative maintenance and cleaning of tools, equipment, and machines within reasonable capabilities., • Performs delivery services by identifying supplies, materials, and equipment to be delivered from invoices or order forms, safely loading items on the delivery vehicle, safeguarding items during transit, delivering items to the correct department, and obtaining the appropriate signature for the receipt of the delivered items., • Assists with management and accountability of surplus property items by retrieving surplus property items as directed, recording the transfer of accountability for the items, and returning the surplus property items to the COTA’s warehouse(s)., • Performs custodial services following established procedures and guidelines in buildings, classrooms, offices, lavatories, restrooms, etc. including their furnishings, using manual tools and powered machines., • Contributes to a work environment that encourages knowledge of, respect for, and development of skills to engage with those of other cultures or backgrounds., • Contributes to the overall success of the campus by performing all other related duties as assigned., • Performs miscellaneous job-related duties as assigned. Knowledge, Skills, and Abilities: • Knowledge of safety guidelines, policies, procedures, and practices, such as, OSHA, and others., • Knowledge of tools, equipment, and materials common to the building and grounds environment., • The ability to read English language sufficiently to understand written work orders and instructions., • Able to follow directions for the proper mixture, use, and disposal/storage of cleaners, solvents, chemicals, fertilizers, and comparable products used in groundskeeping (landscaping)is required., • Skilled in the proper operation and maintenance of ground maintenance tools, equipment, and machinery is required., • Ability to work independently., • The ability to develop knowledge of, respect for, and skills to engage with those of other cultures or backgrounds is required., • Ability to manage appropriate steps to get projects completed; has strong abilities to organize people and processes; can create a plan for resourceful workflow., • Can be trusted to act in a manner that is truthful and values direct, honest communication at all levels of the organization. Required Qualifications: • High School Diploma., • At least 1-3 years’ experience., • Associate degree from an accredited institution may be substituted for experience on a year for year basis., • Valid Drivers’ License preferred., • Strong written and verbal communication skills required., • Must pass a pre-employment criminal background check and drug screening. Physical Demand & Work Environments: • Ability to stand, sit, use of hands to handle, or feel, reach with hands and arms., • Ability to lift and/ or move up to 50 to 100 pounds., • Ability to squat, bend, twist, push/pull., • Ability to stand/walk for long periods., • Use of manual dexterity and fine motor skill., • Specific vision abilities required by this job include close vision and distance vision., • Work may involve moderate exposure to unusual elements, such as extreme temperatures, dirt, dust, fumes, smoke, unpleasant odors, and/or loud noises., • The work environment involves some exposure to hazards or physical risks, which require following basic safety precautions., • Work in extreme environments outdoors throughout the year., • The noise level in the work environment is usually moderate but can be loud during events., • This job description is generic in nature but describes the essential functions of the job. It is not necessarily an exhaustive list of all duties and responsibilities. The essential duties, functions and responsibilities, and overtime eligibility may vary based on the specific tasks assigned to the position. Salary commensurate with experience Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job. EQUAL EMPLOYMENT OPPORTUNITY: COTA strongly supports equal employment opportunity for all applicants regardless of race, color, religion, sex, gender identity, pregnancy, national origin, ancestry, citizenship, age, marital status, physical disability, mental disability, medical condition, sexual orientation, genetic information, or any other characteristic protected by state or federal law.

Job Description As a Hydrovac Truck Operator at Pro-Vac... You will work with one of the largest Vac Truck fleets in the U.S to bring sustainable environmental services to our communities. Every day, you will travel somewhere new, build relationships with current and potential clients, and receive comprehensive training to be the best in the industry. To thrive in this job, you must demonstrate excellent customer service, be a self-motivated “go-getter”, and an efficient problem-solver. If this sounds like you, apply today! When you join team Pro-Vac, YOU GET... • To work with an employee-centric work culture with an amazing team!, • Hourly Pay Range: $29-34 per hour, • Up to $4000 sign on bonus, • Full range of Benefits (Medical, Vision, LTD, Life, EAP), • 401k with up to 4% match, • PTO, • Assistance in purchasing Personal Protective Equipment (including safety boot & eyewear), • In-house training, • A company that will invest in your future!, • And more! You MIGHT be a good fit on our AWESOME team if you are... • A licensed Class A or Class B CDL Driver with Tanker & Air Brake Endorsements, • Must be able to drive a standard (manual transmission) truck., • Enjoy traveling!, • A positive and motivated self-starter!, • An experienced CDL operator looking to expand your career., • Able to successfully pass drug, MVR & background screenings., • Can work more than regularly scheduled hours when necessary, including nights, weekends, and on-call., • Can lift 80lbs and complete daily physical activity. What you'll LOVE doing... • Traveling is required in this role., • Driving and operating equipment, including Eductor/Vacuum/Pump trucks, in a safe and efficient manner., • Practicing proper housekeeping by keeping job sites & trucks clean, putting tools away, and ensuring an organized workspace., • Performing pre-trip & post-trip vehicle inspections., • Demonstrating professionalism and excellence during customer relations and services provided. Physical & Working Conditions If you thrive working outdoors and hands-on, here's what this role demands: • Lifting, carrying, pushing, and pulling up to 50 lbs; frequent bending, kneeling, climbing, and working at heights, • Standing and moving for extended periods; operating vehicles across varied terrain, • Perceiving auditory safety signals, verbal warnings, and radio communications in active field environments, • Wearing all required PPE including OSHA-compliant respirators, hearing protection, eye protection, gloves, and safety footwear, • Reading site documentation and accurately operating equipment controls, • Working outdoors in heat, cold, rain, and wet conditions, • Maintaining situational awareness around active traffic, heavy machinery, and underground utilities, • Working in confined spaces per applicable safety protocols Reasonable accommodations will be considered for qualified individuals with disabilities. If you require an accommodation during the application or hiring process, please contact HR@pro-vac.com. What is Pro-Vac? We deliver safe, efficient, and innovative subsurface solutions to support the maintenance and construction of our communities’ critical infrastructure through our expansive fleet and the most talented, highly skilled team in the industry. Prior employment verification is an intricate part of this hiring process. Your prior employer can be contacted to verify your employment. We appreciate your interest in our company and considering us for your next career destination. Powered by JazzHR EXnyFu5BRr

Job DescriptionCompany Description $5,000 Sign on Bonus Veolia has acquired Clean Earth. As Clean Earth completes its integration into Veolia, recruiting and hiring for this role is being managed in partnership with the Clean Earth talent acquisition team. Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description This position requires 2-4 overnights per week (Mon-Fri). You will be provided with a company card to pay for a hotel and given a daily stipend to cover food and other expenses. Occasional Saturdays are required. Job Details Package and transport waste safely according to all federal, state, and local rules and regulations. Complete required paperwork in accordance with appropriate regulations and customer policies, practices, and procedures. Load and secure materials and waste or unload truck at various customer sites or Clean Earth locations. Prepare and load truck with necessary supplies. Provide the highest level of customer service to assigned accounts daily while communicating any issues to the Manager or Dispatcher for resolution. Perform a documented pre-trip and post-trip check on assigned truck prior to leaving and closing each day. Plan schedule/route based on customer needs by reviewing daily paperwork (e.g. manifests, route sheets, etc.). Follow routing software route schedule. Follow all DOT guidelines while driving. Perform other duties and responsibilities as needed. • Other duties and responsibilities as assigned. Qualifications Basic Requirements: High School diploma or General Educational Development (GED) required At least 21 years of age Understand, read, and write English Able to repeatedly lift and carry up to 75 lbs. Able to stand, bend, and walk for extended periods of time Basic knowledge of Windows-based software (Word, Excel, etc) Willing and able to wear company-provided personal protective equipment such as eye protection, foot protection, Tyvek coveralls, and respirator (as needed) Valid Class B Commercial Driver’s License (CDL) Able to pass a DOT physical, drug test, and DEA background check Preferred Requirements: Hazmat and Tanker endorsements (candidates will be expected to obtain as a condition of employment after hire) Valid TWIC Card Knowledge of hazardous materials and OSHA regulations Additional Information Benefits: Comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, tuition reimbursement, paid volunteering and more. In addition, commencing no later than January 1, 2027, benefits package will include participation in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law

Job DescriptionFlatbed Tow Truck Operator (Class C) Location: Austin, TX Pay: $27.50/hour Job Type: Full-Time | Contract Join a Professional Vehicle Recovery Team We're hiring an experienced Flatbed Tow Truck Operator to safely recover, transport, and relocate vehicles throughout the Austin area. If you have professional flatbed towing experience, a clean driving record, and enjoy working in a fast-paced environment, we'd like to hear from you. This role is ideal for dependable professionals who take pride in safe vehicle handling and exceptional operational support. Responsibilities • Safely operate a flatbed tow truck to recover and transport vehicles, • Perform vehicle loading, unloading, and securement using proper recovery techniques, • Transport vehicles between designated operational locations, • Conduct pre-trip, post-trip, and daily vehicle inspections, • Ensure compliance with all DOT regulations and Hours of Service (HOS) requirements, • Maintain accurate driving, inspection, and delivery logs, • Communicate effectively with dispatch and operations teams, • Perform roadside vehicle recovery when required, • Operate winching and recovery equipment safelyPerform basic vehicle servicing, including:, • Fueling, • Fluid checks, • Tire pressure inspections, • Reporting maintenance issues, • Maintain assigned equipment in clean, safe working condition, • Work collaboratively with logistics and operations teamsQualifications, • Valid Class C Driver's License required, • Clean driving record with no major moving violations, • Minimum 2 years of professional flatbed towing or vehicle recovery experience preferred, • Experience operating rollback or flatbed tow trucks preferred, • Ability to meet DOT medical and physical requirements, • Strong knowledge of vehicle loading, securement, and recovery procedures, • Ability to lift up to 35 pounds, • Excellent communication and teamwork skills, • Flexible schedule availability, • High school diploma or GED preferred, • Must successfully pass a background check and drug screeningWhy Join Us?, • Competitive pay of $27.50 per hour, • Full-time schedule, • Stable, growing operation, • Modern equipment, • Opportunity to work with advanced vehicle technology, • Supportive team environment Powered by JazzHR WB7HHkd7sY

Job Description Openwork is currently engaged in a search to find a lumber grader in South Austin. The lumber grader will be responsible for the safe and efficient movement of materials and products within the warehouse. The primary function will involve operating a sit-down forklift to load, unload, transport, and organize inventory. As a lumber grader you’ll be responsible: • Operate a sit-down forklift to transport materials throughout the warehouse, loading and unloading trucks, moving goods to designated storage areas, and stacking materials., • Making sure that different wood is cataloged correctly and stored in the proper place. Cut selected sizes of lumber and grade them and then stack all sizes on pallets to be shipped., • Assist with inventory control by ensuring that materials are moved to the correct locations and tracked accurately within the warehouse management system., • Safely move and handle materials of various sizes, weights, and shapes. Ensure materials are stored properly to prevent damage or deterioration., • Adhere to all safety regulations and company policies while operating forklifts and performing other duties. Ensure that all safety equipment is used and that work areas remain clear of hazards., • Assist in receiving incoming shipments, checking the materials for accuracy, and organizing them within the warehouse. Prepare outgoing shipments for delivery to customers or other locations., • Utilize forklifts to load and unload trucks, ensuring that items are properly secured and, • Work closely with other warehouse and production team members to ensure smooth and efficient operations. Communicate effectively regarding inventory levels, orders, and any material handling concerns. What you’ll need:, • Previous experience as a lumberyard worker, warehouse worker, or similar role, with at least 1-2 years of sit-down forklift operation experience., • Valid forklift operator certification (preferred), • Ability to lift and move heavy materials (up to 50 lbs), and stand for extended periods., • Strong attention to detail and organizational skills., • Good communication skills to work effectively with team members., • Ability to operate a sit-down forklift safely and efficiently., • Knowledge of safety protocols and best practices for warehouse operations. Perks:, • Healthcare, vision and dental benefits, • Monday-Friday 8am-5pm and Monday-Friday 6:30am-3:30pm, • Pay is $16-$18 depending on experience Click on Apply Now to be considered for this lumber grader job in South Austin, or visit our website www.openwork.com to search for other opportunities that are currently available. About Openwork: Openwork is a talent-first staffing company on a mission to bring ease and thoughtfulness to an industry we’ve held a footing in for 50+ years. We believe there’s more to life than livelihood, but that finding your dream career or team is a really good place to start. Our family of companies also includes QS Nurses, and Aerospace Solutions. Looking for your dream job or hire? Visit us at www.openwork.com to say hello and start building your future together. EOE

Job Description Lumber Yard Worker Openwork is currently engaged in a search to find a lumber yard worker in South Austin. The lumber yard worker will be responsible for the safe and efficient movement of materials and products within the warehouse. The primary function will involve operating a sit-down forklift to load, unload, transport, and organize inventory. As a lumber yard worker you’ll be responsible for: • Operate a sit-down forklift to transport materials throughout the warehouse, loading and unloading trucks, moving goods to designated storage areas, and stacking materials., • Making sure that different wood is cataloged correctly and stored in the proper place. Cut selected sizes of lumber and grade them and then stack all sizes on pallets to be shipped., • Assist with inventory control by ensuring that materials are moved to the correct locations and tracked accurately within the warehouse management system., • Safely move and handle materials of various sizes, weights, and shapes. Ensure materials are stored properly to prevent damage or deterioration., • Adhere to all safety regulations and company policies while operating forklifts and performing other duties. Ensure that all safety equipment is used and that work areas remain clear of hazards., • Assist in receiving incoming shipments, checking the materials for accuracy, and organizing them within the warehouse. Prepare outgoing shipments for delivery to customers or other locations., • Utilize forklifts to load and unload trucks, ensuring that items are properly secured and, • Work closely with other warehouse and production team members to ensure smooth and efficient operations. Communicate effectively regarding inventory levels, orders, and any material handling concerns. What you’ll need:, • Previous experience as a lumberyard worker, warehouse worker, or similar role, with at least 1-2 years of sit-down forklift operation experience., • Valid forklift operator certification (preferred), • Ability to lift and move heavy materials (up to 50 lbs), and stand for extended periods., • Strong attention to detail and organizational skills., • Good communication skills to work effectively with team members., • Ability to operate a sit-down forklift safely and efficiently., • Knowledge of safety protocols and best practices for warehouse operations. Perks:, • Healthcare, vision and dental benefits, • Monday-Friday 8am-5pm and Monday-Friday 6:30am-3:30pm, • Pay is $16-$18 depending on experience Click on Apply Now to be considered for this lumber yard job in South Austin, or visit our website www.openwork.com to search for other opportunities that are currently available. About Openwork: Openwork is a talent-first staffing company on a mission to bring ease and thoughtfulness to an industry we’ve held a footing in for 50+ years. We believe there’s more to life than livelihood, but that finding your dream career or team is a really good place to start. Our family of companies also includes QS Nurses, and Aerospace Solutions. Looking for your dream job or hire? Visit us at www.openwork.com to say hello and start building your future together. EOE

Job Description$5,000 Sign On Bonus Veolia has acquired Clean Earth. As Clean Earth completes its integration into Veolia, recruiting and hiring for this role is being managed in partnership with the Clean Earth talent acquisition team. Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. This position requires 2-4 overnights per week (Mon-Fri). You will be provided with a company card to pay for a hotel and given a daily stipend to cover food and other expenses. Occasional Saturdays are required. Job Details: • Package and transport waste safely according to all federal, state, and local rules and regulations., • Complete required paperwork in accordance with appropriate regulations and customer policies, practices, and procedures., • Load and secure materials and waste or unload truck at various customer sites or Clean Earth locations., • Prepare and load truck with necessary supplies., • Provide the highest level of customer service to assigned accounts daily while communicating any issues to the Manager or Dispatcher for resolution., • Perform a documented pre-trip and post-trip check on assigned truck prior to leaving and closing each day., • Plan schedule/route based on customer needs by reviewing daily paperwork (e.g. manifests, route sheets, etc.)., • Follow routing software route schedule., • Follow all DOT guidelines while driving., • Perform other duties and responsibilities as needed., • Other duties and responsibilities as assigned. Basic Requirements: • High School diploma or General Educational Development (GED) required., • At least 21 years of age., • Understand, read, and write English., • Able to repeatedly lift and carry up to 75 lbs., • Able to stand, bend, and walk for extended periods of time., • Basic knowledge of Windows-based software (Word, Excel, etc)., • Willing and able to wear company-provided personal protective equipment such as eye protection, foot protection, Tyvek coveralls, and respirator (as needed)., • Valid Class B Commercial Driver’s License (CDL)., • Able to pass a DOT physical, drug test, and DEA background check. Preferred Requirements: • Hazmat and Tanker endorsements (candidates will be expected to obtain as a condition of employment after hire)., • Valid TWIC Card., • Knowledge of hazardous materials and OSHA regulations. Benefits: Comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, tuition reimbursement, paid volunteering and more. In addition, commencing no later than January 1, 2027, benefits package will include participation in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law

Job Description The Logistics Trainer will assist in road testing driver applicants for both CDL and non-CDL driving positions as well as providing training for current drivers as needed. When not conducting training tasks, the Logistics Trainer will be assigned normal driving duties within the Transportation Department operating a tractor trailer truck, box truck, or light van/pick-up to and from pickup and delivery points in a safe manner. Roles and Responsibilities • Partner with leadership to translate the organization's strategic plan into actionable human capital strategies that support business objectives and organizational success., • Conduct road testing for driver applicants and assist in the onboarding process., • Conduct individual and group training for current drivers as instructed by Logistics Manager., • Collaborate with Safety Team and Logistics Manager to provide regular training and instruction for drivers including post-incident corrective training., • Neatly and accurately complete required paperwork to include manifest, vehicle inspection report, driver logs, donation count sheets, and truck seals., • Accurately report incidents and accidents to supervisor., • Perform operator-level maintenance on assigned equipment to include daily checks for fuel, oil, lubricants, water, antifreeze, and vehicle condition., • Ensure safety of truck and equipment at dock to include chocking of tires., • Present neat and professional Goodwill Central Texas image to customers, stores, and the public., • Attend all scheduled meetings., • Provide excellent customer service., • Meet attendance and punctuality requirements., • Load and unload trailers by-hand/pallet jack., • In between pick up and drop offs, assist in material handling duties in warehouse as needed. This could include emptying boxes, moving pallets, sweeping trailers, docks, or areas around trailers to keep trash clear or other debris that may impact trailers., • Experience and/or familiarity with telematics, fleet routing software, and electronic duty logs., • Experience and/or familiarity with Smith System defensive driver training., • Other duties as assigned. Supervisory Responsibility • This position does not have supervisory responsibilities., • Required Qualifications, • Must be at least 21 years of age., • Must possess a valid Texas Class A Commercial Driver's License (CDL) with an acceptable driving record., • Must possess a valid Department of Transportation (DOT) Medical Examiner's Certificate., • Must be able to pass all applicable DOT physical and drug screening requirements., • Minimum of 2 years of commercial driving experience operating tractor-trailers or equivalent commercial vehicles., • Knowledge of DOT regulations, Hours of Service (HOS) requirements, and driver safety practices., • Ability to effectively communicate, read, write, and understand English., • Ability to accurately complete required reports, driver logs, manifests, and inspection documentation., • Basic computer skills and ability to use electronic logging devices (ELDs), telematics systems, and fleet management software., • Ability to conduct training, coaching, and performance evaluations for new and existing drivers., • Strong interpersonal, customer service, and presentation skills. Preferred Qualifications • Previous driver trainer, mentor, or instructor experience., • Experience conducting road tests and driver evaluations., • Familiarity with Smith System defensive driving principles., • Experience using fleet routing software, telematics platforms, and transportation management systems., • Warehouse, logistics, or distribution center experience., • Forklift or pallet jack experience., • Recommended Physical Requirements, • Ability to safely lift, carry, push, and pull up to 50 pounds on a regular basis., • Ability to occasionally lift or move items weighing more than 50 pounds with assistance or appropriate equipment., • Ability to stand, walk, bend, stoop, squat, kneel, reach, and twist throughout the workday., • Ability to climb into and out of commercial vehicles, trailers, and loading docks repeatedly during a shift., • Ability to sit for extended periods while operating commercial vehicles., • Ability to use hands and fingers to operate vehicle controls, mobile devices, and electronic logging equipment., • Ability to safely load and unload freight using manual pallet jacks and other material handling equipment., • Ability to work indoors and outdoors in varying weather conditions and in non-climate-controlled environments., • Ability to safely perform duties in warehouse, dock, yard, and roadway environments., • Ability to meet all DOT physical qualification standards and maintain required certifications., • Ability to visually inspect vehicles, read gauges and instruments, and maintain situational awareness while operating equipment., • Ability to work flexible schedules, including early mornings, evenings, weekends, or overtime as business needs require. Equal Employment Opportunity Statement: Goodwill Central Texas is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all Team Members. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability status, protected veteran status, gender identity, sexual orientation, or any other characteristic protected by law. Background Check Requirement: Employment is contingent upon the successful completion of a pre-employment background check. This may include verification of employment history, education, criminal background, and other information relevant to the position. #IND2

Compensation Base Pay: $19.65/ hour Available Schedules Schedule 1 Monday: 6:00AM-11:00AM Tuesday: OFF Wednesday: OFF Thursday: 6:00AM-11:00AM Friday: 6:00AM-11:00AM Saturday: OFF Sunday: 6:00AM-11:00AM Schedule 2 Monday: 2:00PM-10:00PM Tuesday: 2:00PM-10:00PM Wednesday: 2:00PM-10:00PM Thursday: 2:00PM-10:00PM Friday: 2:00PM-10:00PM Saturday: OFF Sunday: OFF The Freight Handler (Forklift Operator) is responsible for the safe, accurate, and efficient loading, unloading, staging, scanning, and movement of freight. As certified forklift operators within the operation, they provide safe, accurate, and efficient loading, unloading, movement, and documentation of cargo/freight within a multimodal transportation terminal, intermodal yard, warehouse, or dock environment, directly contributing to productivity, workflow coordination, and freight integrity. As the most experienced team members without direct reports, they often assist with mentoring, guiding, and onboarding new Material Handlers and solving complex operational problems on the floor. Responsibilities Load and unload freight using sit-down/stand-up forklifts and reach trucks, along with other appropriate Material Handling Equipment (MHE), such as pallet jacks, carts, and dollies, and approved physical lifting techniques. Move, stage, sort, and position freight between dock doors, trailers, and designated warehouse areas in accordance with operating procedures. Pick, pack, and prepare items for shipping and delivery. Assist drivers with loading and unloading activities following dock and safety procedures. Label, scan, and track freight using handheld scanning devices and company systems to ensure accuracy and documentation integrity. Identify damaged freight and promptly report issues, unsafe conditions, or equipment concerns to supervisory personnel. Abide by all company safety policies, OSHA requirements, and PPE standards. Maintain a clean, safe, and organized dock environment, including work areas, tools, and MHE. Perform tasks under appropriate supervision while learning equipment operation, safety protocols, and job procedures (for developing roles). Support dock productivity, workflow efficiency, and overall operational goals. Work assigned schedules, including nights, weekends, holidays, and overtime based on business needs. Safely and accurately handle oversized, high‑value, or complex freight. Assist with dock coordination, workflow management, and problem resolution. Prioritize freight and coordinate task assignments, sometimes acting in a lead capacity (without direct supervisory responsibility). Serve as a subject matter expert on dock operations, equipment, and procedures. Train, mentor, and support the development of other Material Handlers. All other duties as assigned to meet evolving business needs. Qualifications Education: High School Diploma or General Education Development (GED)/equivalent preferred but not required. Certification/Licensure: Valid forklift certification/licensure (or ability to obtain before operating equipment) required. Experience: 3+ years of dock or warehouse experience required. Communication: Ability to communicate effectively in English, verbally and in writing, to understand safety and operational instructions, work assignments, and freight documentation. Ability to recognize numbers, labels, barcodes, and freight markings accurately, and to perform basic arithmetic to verify freight counts, quantities, and weights. Basic arithmetic skills to verify freight counts, quantities, and weights. Technology: Willingness and ability to learn and use basic computer systems, handheld scanners, and freight-tracking devices. Equipment: Ability to safely operate material handling equipment (MHE) such as pallet jacks, dollies, hand trucks, order pickers, pallet riders, conveyors, dock plates, dock levelers, sit-down/stand-up forklifts and reach trucks (with company-assisted certification/training), and/or other specialized MHE as required by the site. Ability to maintain regular and predictable attendance. Physical Demands: Extensive standing, walking, bending, stooping, kneeling, crouching, reaching, and twisting for 8-12 hours per/shift, with the ability to lift, push, pull, and carry freight up to 50lbs without assistance, with occasional lifting of freight up to 75lbs with assistance or mechanical aids throughout each 8-12 hour shift, multiple times per/week. Vision, hearing, and verbal communication skills sufficient to work safely in a noisy dock environment. Environment: Ability to work safely around moving equipment, vehicles, and freight in a non-climate-controlled environment, including frequent exposure to temperature extremes (both hot and cold), occasional outdoor work and/or exposure to precipitation (rain, sleet, snow, etc.), regular exposure to moving equipment, vehicle traffic, exhaust, dust, and moderate to loud noise. -- #LI-KK1 | #LI-Onsite

Job Description About Circular Services Circular Services is a leading developer and operator of circular economy infrastructure and services and the largest private recycling company in the U.S. with operations across the country. We help businesses and municipalities reduce and divert waste, lowering disposal costs and fueling local supply chains by ensuring materials are recovered, recycled, and reused. About the Role: The recycling Sorter works in a fast-paced warehouse setting, separating recyclable materials on a conveyor line to ensure proper sorting and quality standards. This role helps operation by removing non-conforming items and performing general housekeeping and equipment cleanup throughout the facility. Benefits: • Comprehensive Medical, Dental, and Vision coverage, • Company-paid Life Insurance, • Flexible Spending Account (FSA), • 401k with company match, • Paid Parental Leave, • Paid Time Off (PTO), • Employee Assistance Program (EAP), • Tuition Reimbursement Program Responsibilities: • Stand at a station along a conveyor belt to inspect and sort recycling materials, • Identify and remove non-conforming or prohibited materials from the sorting line., • Perform general housekeeping and clean processing equipment at the end of each shift., • Maintain a safe and organized work area throughout the shift., • Follow all safety policies, procedures, and proper use of personal protective equipment (PPE)., • Work efficiently in a fast-paced warehouse and recycling environment while meeting productivity and quality expectations., • Report equipment issues, safety concerns, or operational problems to the appropriate supervisor., • Perform additional duties and responsibilities as assigned. Minimum Job Qualifications: • Previous experience in a warehouse, manufacturing, recycling, or industrial environment preferred., • Familiarity with the use of basic Personal Protective Equipment like a hard hat, reflective vest, steel toe boots, ear and eye protection, utility gloves, and arm preferred., • Ability to work safely in a fast-paced warehouse and recycling environment., • Comfortable working at elevated heights., • Ability to work around moving conveyor systems and rotating equipment without experiencing motion sickness., • Ability to work in varying environmental conditions, including extreme heat and cold., • Strong attention to detail with the ability to quickly identify and remove non-conforming materials., • Reliable attendance and the ability to work assigned shifts, including overtime as needed. Working Conditions and Physical Requirements: • Regularly use hands and fingers to handle or operate objects, tools or controls, and reach with hands and arms, • Frequently required to sit, walk, stand, climb, balance, stoop, squat, kneel, crawl, speak and hear., • Must frequently lift and/or move up to 40 pounds, • Must be able to stand for long period of time, • Vision abilities include close, distance, color, and peripheral vision, depth perception and ability to adjust focus, • The noise level in the work environment is moderate to loud EEOC: Circular Services is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind: Circular Services is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at Circular Services are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. Circular Services will not tolerate discrimination or harassment based on any of these characteristics. Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions.

Job DescriptionDal-Tile is currently seeking an exceptional Warehouse Associate to join our TEAM! As the Warehouse Associate, we need someone who will own a variety of material handling duties such as receiving, loading/unloading material, pulling/assembling customers’ orders, and performing inventory checks. This position involves daily use of forklift equipment. Primary Objective:Performs various material handling duties associated with the warehouse. Primary Function and Scope: • Performs a variety of warehouse duties such as pulling/assembling customer orders, checking outbound orders for accuracy/completeness, inventory stock checks, restocking and labeling vendor product, maintaining displays (tools, caulk, etc.), moving, storing, and replenishing material, and conducting daily cycle counts., • Performs receiving duties such as receiving and unloading inbound material, processing inbound shipments, stocking material, processing customer returns, and notifying management of damaged shipments for freight claims., • Operates forklift equipment., • Maintains a clean and organized facility by sweeping, removing trash, performing restroom and general office maintenance, etc., • May wait on customers and prepare sales slips., • Maintains a safe working environment by obeying all safety rules as outlined in the Safety Program and by reporting all accidents, unsafe conditions, and acts to Management., • Performs other related duties as required. Experience and Knowledge Required:, • High School diploma or equivalent experience., • Certified Forklift Operator., • 3+ years of previous warehouse experience preferred. Competencies:Basic math skills, organization skills, customer service skills, fluency in English, detail-oriented, and safety-conscious. Other Pertinent Job Information:While performing the duties of this job, the employee is regularly required to stand, use hands, and reach with hands and arms. The employee is required to walk, stoop, kneel, crouch, or crawl. The employee may sit, climb, balance, talk or hear. The associate must be able to regularly lift up to 15-30 lbs and, at times, safely lift up to 70 lbs. Tile boxes or other materials that are longer than 36 inches or more than 70 lbs. in weight require a team lift. Specific vision abilities required by this position include close vision, peripheral vision, and the ability to adjust focus. Reasonable accommodations may be made to enable individuals with disabilities.

Job DescriptionDescription: TAK Broadband is a leading end-to-end U.S. fiber broadband network construction contractor operating in 42 states. It builds more than just networks; it connects communities to new valuable digital opportunities. TAK offers comprehensive service solutions, from construction to drops to fulfillment. TAK’s ecosystem of partners allows it to successfully complete every project starting from the first point of conception. This includes engineering teams, distributors, and more than 100 qualified construction crews with extensive experience across all ISP types and markets; over 300 experienced bury drop crews; and more than 700 professional technicians. We are seeking a Warehouse Assistant to join our team in Humble, TX. In this role you will be responsible for ensuring that the warehouse remains cleaned, organized and inventory is tracked and organized. Why TAK? • Full Time, • Paid Weekly, • Compensation: $18 - $25 per hour, DOE, • Full Benefits Package (Medical, Dental & Vision), • Paid Time Off, • 401(k) with Company Match!, • 25K Company Paid Life Insurance, • Independent Work & Team Collaboration, • Career Development & Advancement Opportunities! The Role • Maintain warehouse, ensuring it remains cleaned and organized, • Track and maintain inventory for all equipment & parts, keeping items locked and organized, • Place orders and manage intake of deliveries, stocking shelves, • Issue/return equipment to Technician’s on a daily and weekly basis, • Complete a daily reconciliation of technician equipment levels, • Participate in company vehicle management: clean and detail vehicles, deliver vehicles requiring repair to the repair shop, • Assign uniforms, tools, and safety gear to all technicians; ensuring invoices are signed, • Other duties as assignedRequirements:, • At least 6 months of warehouse experience preferred, • Experience working in telecommunications a plus, • Ability to work a rotating Saturday schedule, • Ability to operate a pallet jack and certified forklift operator preferred, • Experience working with Microsoft Office products, specifically Outlook and Excel a plus, • Excellent customer service, time management, problem-solving and troubleshooting skills, • Ability to build and maintain positive relationships with internal and external customers, • Ability to work independently, • Ability to complete work indoors, outdoors, in tight spaces and elevated by bending, reaching, twisting, climbing, and working while standing up to 70% of the time, • Ability to safely navigate various terrains, managing equipment and tools, • Ability to lift and carry up to 50lbs on occasion, • Must provide a valid government-issued photo ID for verification; a driver’s license is required if the role involves driving, • Passing of all pre-employment requirements (MVR, Background Check, Drug Screen) The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. TAK is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, protected veteran status, or any other characteristic protected by law. We maintain full compliance with the Americans with Disabilities Act and are committed to providing equal access throughout our employment practices. Individuals with disabilities may request reasonable accommodations during the application and hiring process by contacting TAKRecruiter@takbroadband.com.

Job Description Location: Austin, TX, 78754 Job Type: Full-Time (40 hours/week) Pay: $20.00 per hour Schedule: Day Shift In-Person Role Job Summary: We are seeking a skilled and safety-conscious Standing Forklift Driver to join our team in Austin, TX. In this role, you will be responsible for operating a forklift to safely move, load, unload, and organize products within the warehouse. You’ll play an essential role in supporting warehouse operations, maintaining accuracy in product movement, and ensuring a safe and clean work environment. Key Responsibilities: Operate a standing forklift to load, unload, move, and stack materials safely and efficiently. Perform daily equipment inspections and report any maintenance issues. Accurately move products to designated storage or staging areas. Verify and maintain product accuracy for inventory and orders. Load and unload goods from trucks, pallets, and shelves as needed. Maintain a clean and organized warehouse, including trash removal and general upkeep. Follow all safety procedures and company policies to prevent accidents and injuries. Assist with inventory counts and other warehouse tasks as assigned. Requirements: High school diploma or equivalent. Valid forklift operator certification required. Proven experience operating standing forklifts in a warehouse or distribution environment. Ability to lift up to 50 lbs and work on your feet for extended periods. Strong attention to detail and commitment to safety. Reliable, punctual, and able to work independently or as part of a team. Flexible schedule, including weekends and overtime as needed. Experience with Warehouse Management Systems (WMS) is a plus. Benefits: 401(k) Health, Dental, and Vision Insurance Paid Time Off Opportunities for advancement On-the-job training If you’re a dependable and safety-focused professional who enjoys working in a fast-paced warehouse environment, we’d love to hear from you!

Job DescriptionDescription Four Hands is looking for a Warehouse Associate to join our growing warehouse team! The Warehouse Associate will perform a variety of duties to manage the flow of reverse logistics materials including, but not limited to, inbound processing, product inspection, and product disposition. In This Role • Handle equipment such as a power saw, table saw, and radial arm saw to cut wood at a precise length, • Ability to use and read a measuring tape, • Assemble pallets using air powered nail guns, • Handle finished materials and move them to appropriate storage areas within the warehouse, • Ability to identify items on all paperwork – including, but not limited to:, • Customer orders and labels, • Manifest documents, • Packing list, • Stock receipts, • Bill of ladings as needed, • Meet productivity requirements as needed, • Maintain an exceptionally clear and safe work environment, • Comfortable working independently and in a team environment, • Uphold our Core Values and be a valuable member of the Four Hands team, • Other duties as assigned by Management The Ideal Person • 1+ years of experience in warehouse/distribution center operations, • Forklift operator experience/certification a plus, • Ability to work independently or in a team environment, • Experience in metric reporting using Microsoft Excel desired, but not required, • Ability to creative problem solve, • Willingness to acquire new knowledge, skills and abilities, • Ability to effectively manage ambiguity and changing priorities in a fast-paced environment, • Ability to lift and carry up to 50 lbs. without assistance, • Ability to stand/lift for up to 8 hours Benefits • Competitive hourly wages, • Generous flexible time off program – 2 weeks a year!, • Free Employee Medical, Dental and Vision Benefits and 401(k) + match, • $200 sign on bonus, • Up to $200 monthly attendance bonus, • Paid parental leave for both Moms and Dads!, • Free lunch every Friday

At Texstar Enterprises, LLC, as a Telecom Drill Bores Operator, you’ll be responsible for operating drill equipment to install underground telecommunications cables and infrastructure. • Weekly Paychecks, • Paid Time Off, Parental Leave, and Holidays, • Insurance (including medical, prescription drug, dental, vision, disability, life insurance), • 401(k) w/ Company Match, • Stock Purchase Plan, • Education Reimbursement, • Legal Insurance, • Discounts on gym memberships, pet insurance, and much more!, • Determine bore path and locate utilities, • Safely operate and control all necessary equipment to complete assigned tasks, • Verify existing utilities by potholing to determine bore path, • Utilize “Mud” mixing systems, • Develop and maintain a bore schedule, • Responsible for site set-up, clean-up, and equipment maintenance, • Perform work in all weather conditions, • Other duties as assigned IND1 • To be 18 years of age or older, • Authorization to work in the United States for this company, • High School Diploma, GED equivalent, or relevant work experience, • Valid state driver's license (cannot be Provisional), including an acceptable driving record, • Valid Class A Commercial driver's license with tanker endorsement or willingness to obtain it, • Experience with drilling equipment, including their capabilities, limitations, and drill setup and design processes Physical abilities & exposures • Routinely: work with arms above shoulder level, in confined space and remote locations, operate vehicle and heavy machinery, squeeze, fine hand motion, bend, stoop, stand, walk, climb stairs and lift greater than 55 pounds, • Occasionally: use ladder, keyboard and mouse Why grow your career with us Your career here is more than just a job — it's your pathway to opportunity. Our hands-on training, supportive environment, and responsive leadership connect you to work with purpose. Our commitment to you extends beyond professional development to a safety-first culture that ensures you can do what you do best, with peace of mind. Building stronger solutions together Our company is an equal-opportunity employer — we are committed to providing a work environment where everyone can thrive, grow, and feel connected. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

At Texstar Enterprises, LLC, as a Telecom Drill Bores Operator Foreman, you’ll oversee and coordinate the drilling operations for telecommunications infrastructure, ensuring efficient and safe installation of cables and equipment. You'll serve as the on-site expert, offering guidance and support to less experienced team members. • Weekly Paychecks, • Paid Time Off, Parental Leave, and Holidays, • Insurance (including medical, prescription drug, dental, vision, disability, life insurance), • 401(k) w/ Company Match, • Stock Purchase Plan, • Education Reimbursement, • Legal Insurance, • Discounts on gym memberships, pet insurance, and much more!, • Lead new site Job Safety Analysis, • Read engineering drawings, prints and technical documents for OSP facilities, • Draw prints or sketches and provide field notes describing OSP facilities, • Safely operate and control all equipment necessary to complete tasks assigned to crew, • Determine bore path and locate utilities, • Utilize “Mud” mixing systems, • Ensure accurate drilling and utility protection, • Schedule, maintain equipment & tooling, and perform site set-up and clean-up, • Resolve property owner complaints and document work, • Perform work in all weather conditions, • Other duties as assigned IND1 • To be 18 years of age or older, • Authorization to work in the United States for this company, • High School Diploma, GED equivalent, or relevant work experience, • Valid state driver's license (cannot be Provisional), including an acceptable driving record, • Valid Class A Commercial driver's license with tanker endorsement or willingness to obtain it, • At least 3 years of experience operating drill bores equipment within the telecommunications or construction industry Physical abilities & exposures • Routinely: work with arms above shoulder level, in confined space and remote locations, operate vehicle and heavy machinery, squeeze, fine hand motion, bend, stoop, stand, walk, climb stairs and lift greater than 55 pounds, • Occasionally: use ladder, keyboard and mouse Why grow your career with us Your career here is more than just a job — it's your pathway to opportunity. Our hands-on training, supportive environment, and responsive leadership connect you to work with purpose. Our commitment to you extends beyond professional development to a safety-first culture that ensures you can do what you do best, with peace of mind. Building stronger solutions together Our company is an equal-opportunity employer — we are committed to providing a work environment where everyone can thrive, grow, and feel connected. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Job Description Job Title: Assistant QC Technician Department: Production Reports To: Supervisor Location: 301 W. Howard Lane, Austin, TX 78753 Job Type: Full-time FLSA Status: Non-Exempt Shift: Mo-Fri 2:30pm to 11pm Compensation: $16 - $18 DOE POSITION SUMMARY Perform inspection at all levels for raw and coated materials (as determined by the QC Department) to ensure quality standards are met. KEY RESPONSABILITIES • Assist the quality technician in performing daily inspection., • Clean, prepare, and assemble product., • Inspect the quality of coated material before and during production., • Ensure quality of final product., • Maintain the work area and equipment in clean and orderly condition., • Report defective material or questionable condition to the department QC technician on duty, • Contribute and adhere to safety and quality., • Communicate status of operation in a timely manner to the quality technician on duty including any safety and/or process problems., • Must be able to sit or stand for long periods of time., • Focus on work and minimize interruptions., • Prioritize, work well under time pressure, and focus on work in midst of noise., • Comply with safety laws and regulations., • Other duties may be assigned to meet business needs. EXPERIENCE & QUALIFICATIONS • Familiarity with quality principles; experience testing product quality, • Hands-on experience with efficient preparation, execution, gathering/storing/interpreting relevant data; and preparing reports, • Printer machine operator experience is preferred EDUCATION • High school or GED PHYSICAL REQUIREMENTS • Regularly required to stand, stoop, kneel and/or crouch, • Capable to lift or move 50 lbs or more through out the shift, • Occasionally required to climb or balance, • Ability to use hands to finger, handle or feel objects, tools or controls: reach with hands and arms, stoop, kneel, or crouch. WORKING CONDITIONS Work performed in a warehouse environment with exposure to moderate noise, moving equipment, and temperature variations. BENEFITS • Medical, dental, and vision coverage., • 401(k) retirement plan., • Paid holidays and generous PTO., • Career growth and promotional opportunities., • And much more! The Marco Group is an equal-opportunity employer and complies with all applicable federal, state, and local non-discrimination laws. We provide equal employment opportunities regardless of race, color, religion, sex, national origin, age, disability, marital status, sexual orientation, gender identity, genetic information, military/veteran status, or any other protected status. If you believe you have been discriminated against or have concerns about our compliance, please contact our Human Resources department.

Job Description MGC Contractors, Inc. is a 100% Employee Owned Corporation. We specialize in all forms of water and wastewater general contracting including Job Order Contracting, Construction Manager at Risk, Design-Bid-Build, and Design-Build throughout Arizona, Texas, Utah, and New Mexico. MGC Contractors, Inc is looking for a licensed Crane Operator to join our Texas Division, in the Austin area. The crane operator will safely operate rough terrain hydraulic cranes to transfer heavy objects from one location to another. An RT crane, or rough terrain crane, is a mobile crane designed to work in challenging conditions like uneven ground or tight spaces. PRIMARY RESPONSIBILITIES AND DUTIES • Operate RT hydraulic cranes., • Setup machinery based on complex manuals. Calculate load capacity, determine weight of loads in relation to the manufacturer's load chart specifications, whether it's on a construction jobsite or in a facility., • Inspecting the crane to ensure its safety on a daily basis for defects, wear and maintenance prior to operation. Report deficiencies promptly to supervisor., • Inspect and assess ground conditions to ensure the crane is set up safely., • Inspect clearances, overhead lines and other objects to ensure no accidents or damages occur., • Hoist, position and place machinery, equipment or other large objects at construction sites and industrial facilities., • Work within precise limits and standards of accuracy., • Coordinate with ground crew and other operators to interpret all forms of signal-hand, verbal and radio., • Maintain activity logs and records of service., • Inspect rigging and remove damaged equipment from service., • Wear required PPE at all times., • Willingness to travel as work dictates, • Any and all other duties assigned. PHYSICAL DEMANDS AND WORK ENVIRONMENT • This position operates at professional construction sites, requiring the ability to communicate with verbally others on site, in person and over the telephone, ability to read printed materials, signs and directions, stamina to maintain attention despite interruptions, ability to lift, push, pull, carry, handle or feel objects, supplies, tools, machinery and/or controls weighing up to 50 pounds and reach with hands and arms; climb stairs and/or ladders; balance, bend, stoop, kneel, crouch, crawl, lift overhead, traverse around or otherwise position one's self around the required work and safety requirements to navigating and perform activities on various construction sites in a safe manner. The position requires working outside, frequently for long periods of time in all weather, including extreme hot and cold temperatures. While working, the employee might be exposed to various chemicals, vapors, pollutants, virus or other pathogens, gases, uneven surfaces, loud noises, moving vehicles or machines and dust/debris. POSITION TYPE/EXPECTED HOURS OF WORK • This is a full-time position. Occasional overtime, weekend work may be required as job duties demand. MINIMUM QUALIFICATIONS • High School Diploma or GED required., • NCCCO certification or equivalent is required., • Minimum of five(5) years of experience operating RT mobile Cranes is required., • Rigging expertise., • Experience working around plant construction jobsites., • Accuracy and attention to details., • Knowledge of OSHA Regulations and ANSI Standards in Crane Operations., • Proficient in oral and written communication. AAP/EEO STATEMENT MGC Contractors is an equal employment opportunity employer and, as such, we consider individuals for employment according to their abilities and performance. Employment decisions are made without regard to age, race, religion, sex, national origin, physical or mental disability, genetic information or any other classification protected by law. All employment requirements mandated by state and federal regulations will be met. Discriminatory or harassing conduct in the workplace, whether committed by management or non-management employees or outside person (vendors, customers, etc.) is prohibited. This job description is not meant to encompass all tasks and or job responsibilities, but rather it is meant to provide the employee with a general summary of what the position entails. MGC Contractors has the right to amend or revise this job description at any time. Reasonable accommodations may be made when it does not impose an undue hardship on the company to do so. Job Posted by ApplicantPro

Job Description Utility Equipment Operator Austin, TX | Full-Time | Onsite/Field-Based | Travel Required The Opportunity Infravision is looking for a hands-on Utility Equipment Operator to operate, transport, set up, and support Infravision’s smart tension puller and related systems used in pre-stringing operations. This role is critical to safe and efficient field execution on commercial projects, demonstrations, and customer deployments. The Transmission Stringing Equipment Operator will work closely with field teams, technical teams, project managers, contractors, and internal stakeholders to ensure equipment is properly prepared, transported, operated, maintained, documented, and ready for project needs. This is a field-based role in a fast-moving operations environment. The right candidate will bring strong equipment operation skills, safety discipline, mechanical and electrical aptitude, professional communication, and the flexibility to support a broad range of responsibilities in remote and active project environments. About Infravision Infravision is a high-growth, technology-enabled services company specializing in aerial robotics and software solutions for the transmission industry, with a focus on increasing grid capacity and automating power line construction. Infravision’s mission is to deliver solutions that modernize and decarbonize the power grid and accelerate the world’s transition to renewable energy. Trusted by some of the world’s largest electric utility companies, Infravision’s technologies and services are at the cutting edge of transmission and power grid modernization. Infravision operates across Australia, the United States, and India, and continues to scale globally. Find out more about Infravision and our work at: https://infravision.com.au/ Why Work For Infravision At Infravision, you will be part of a mission-driven technology company helping transform how high-voltage transmission infrastructure is built. Our work is hands-on, field-based, and directly connected to grid modernization, renewable energy growth, and critical infrastructure delivery. You will work alongside operations, field, safety, aviation, engineering, and customer teams to support safe and successful deployments of specialized transmission construction technology. This is a role for someone who enjoys operating equipment, solving field problems, supporting logistics, working outdoors, traveling to project sites, and helping build a new way of delivering transmission infrastructure. What You’ll Do • Operate Infravision’s smart tension puller and related transmission stringing systems in support of pre-stringing operations, customer projects, demonstrations, and deployments., • Transport, load, unload, set up, operate, and break down equipment safely and efficiently at project sites., • Perform pre-trip, post-trip, pre-operation, and post-operation inspections of equipment, vehicles, systems, and associated components., • Monitor system functionality before and during deployment, including power, cooling, communication, mechanical, and operational systems., • Coordinate equipment transport, setup, deployment, and scheduling with internal teams, contractors, project managers, field crews, and external stakeholders., • Support onsite configuration, inventory checks, equipment readiness, and project-specific setup needs., • Troubleshoot operational issues related to generators, batteries, communication equipment, mechanical components, and power distribution systems., • Perform routine maintenance, inspections, and basic repairs to help prevent equipment downtime., • Maintain accurate records of transport logs, setup details, equipment inspections, maintenance activities, repairs, incidents, and project updates., • Support safety and compliance requirements by conducting equipment checks, following company procedures, using appropriate PPE, and supporting safe work execution., • Communicate clearly and professionally with field teams, technical support, contractors, project managers, customers, and internal stakeholders., • Work outdoors in field-based environments, including construction sites, remote locations, urban project sites, rugged terrain, and challenging weather conditions., • Travel as required and support flexible schedules, including evenings, weekends, extended hours, or on-call needs when required., • Support other field, operational, safety, documentation, logistics, equipment, and startup needs as assigned. What We’re Looking For • High school diploma or equivalent required., • Technical training or certification in equipment operation, heavy equipment, mechanical systems, electrical systems, commercial driving, or related fields preferred., • Experience operating, transporting, setting up, maintaining, or supporting field-based equipment, heavy equipment, utility equipment, construction equipment, or similar systems., • Experience with transmission stringing equipment, tensioners, pullers, generators, power distribution units, communication systems, or similar field equipment preferred., • Basic understanding of mechanical, electrical, power, communication, and equipment systems used in field operations., • Strong problem-solving skills with the ability to troubleshoot equipment issues, system failures, and operational challenges in the field., • Valid commercial CDL A license and clean driving record required., • Ability to operate large vehicles, equipment, systems, or heavy field assets safely., • Strong safety mindset and ability to follow safety protocols, equipment procedures, emergency procedures, and site requirements., • Strong communication and coordination skills with the ability to work effectively with multiple teams and stakeholders., • Ability to work under pressure in remote, active, or challenging field environments., • Ability to work outdoors in varying weather conditions and potentially hazardous environments while following strict safety guidelines., • Ability to lift and carry tools and equipment, including objects over 50 lbs. when required., • Ability and willingness to travel, work flexible hours, and support weekend, evening, extended-hour, or on-call needs as required., • Flexibility to support a broad range of responsibilities in a growing startup environment. Diversity and Inclusion At Infravision, diversity and inclusion are integral to our culture. We welcome applicants from all backgrounds and are committed to fostering an inclusive environment where unique perspectives are valued. We believe different experiences, skills, and ways of thinking strengthen our teams and help us solve complex problems. We encourage applications from candidates who meet the core requirements of the role and are excited to contribute to a growing, mission-driven technology company. Infravision is a proud veteran employer, with up to 40% of our workforce being from former armed forces backgrounds.

Job Description Hyliion is committed to creating innovative solutions that enable clean, flexible and affordable electricity production. The Company's primary focus is to develop distributed power generators that can operate on various fuel sources to future-proof against an ever-changing energy economy. Job Purpose The Metrology Engineer is Hyliion's technical authority on dimensional measurement across internal operations and the supply base. KARNO functionality depends on precision machined components and sub-assemblies held to micron-level form and finish, and this position sits within the Quality function as the interface between Design Engineering, the supply base, Manufacturing, and Quality. The role owns the measurement system end to end: the metrology lab and equipment roadmap, inspection programs and fixtures, the calibration and gage control system, and the measurement standards to which both supplier and internal inspection are held. The position is accountable for the integrity of dimensional data wherever it is generated — at a supplier's machine, at receiving inspection, or in process on Hyliion's floor — and for ensuring that results from those sources agree within defined, documented tolerances. The balance between supplier-facing and internal work shifts with the maturity of the supply base and the product portfolio; both are permanent responsibilities of the role. AI at Hyliion At Hyliion, AI is core to how we work. We equip every team member with leading AI tools and count on you to use them — to move faster, solve harder problems, and help us realize the full potential of KARNO technology for the world. Duties and Responsibilities Supplier Metrology and Source Inspection • Serve as Hyliion's technical lead for dimensional verification at key suppliers, including additive manufacturing partners, precision machining sources, and the magnetic assembly supply chain., • Assess supplier measurement capability: equipment, environment, programs, fixtures, operator competency, and calibration integrity. Document findings and drive corrective action to closure., • Design, specify, and validate inspection fixtures and holding methods for supplier-produced components; ensure fixture datum schemes replicate the drawing datum structure., • Author, review, and approve supplier CMM and scanning programs, verifying that each program measures the characteristics as specified on the drawing., • Lead First Article Inspection per AS9102 (or equivalent), including drawing ballooning, characteristic accountability, and disposition of nonconforming results., • Conduct gage correlation and round-robin studies between Hyliion and supplier measurement systems; establish and maintain the accepted correlation offsets and their control., • Qualify suppliers for documented, auditable self-certification and maintain periodic surveillance of those approvals., • Support supplier PPAP-style qualification packages and the measurement evidence required for production part approval. Design Engineering Interface — Measurability by Design • Participate in design reviews as the voice of measurement: challenge datum schemes, tolerance callouts, and inaccessible features before drawings release., • Perform and review GD&T application per ASME Y14.5; identify callouts that are ambiguous, unmeasurable, or measurable only at unreasonable cost., • Support tolerance stack-up analysis on critical interfaces such as heater-to-chiller joints, bearing clearances, stator and translator concentricity, and pressure vessel sealing surfaces., • Define Critical-to-Function and Key Characteristics with Design Engineering, and ensure every one has a documented, capable measurement method before production release., • Advance Model-Based Definition and PMI adoption so that measurement intent flows from CAD to inspection program without manual reinterpretation. Internal Metrology Capability • Own the metrology equipment roadmap and capital justification across Hyliion sites: CMMs, structured-light and laser scanning, CT inspection for internal additive geometry, form and roundness measurement, surface finish, and hand gaging., • Own the controlled metrology environment — thermal stability, isolation, and fixturing infrastructure — including the specification and commissioning of new capability., • Develop and maintain internal inspection programs, work instructions, and inspection plans; train Quality Inspectors and Manufacturing personnel to execute them consistently., • Own the calibration and gage control program: traceability to NIST, calibration intervals, recall system, out-of-tolerance investigation, and impact assessment on previously accepted product., • Advance the organization from reactive inspection toward in-process measurement, statistical process control, and capability-based release. Measurement Systems Analysis and Data Integrity • Plan and execute Gage R&R, bias, linearity, and stability studies on all measurement systems used for product acceptance; drive systems that fail to meet criteria to remedy or replacement., • Establish and maintain measurement uncertainty budgets for critical characteristics, and define acceptance decision rules that account for them., • Own the dimensional data architecture — collection, storage, retrieval, and analysis — so that measurement results are traceable to serial number, revision, operator, equipment, and date., • Apply SPC and capability analysis (Cp/Cpk, Pp/Ppk) to characteristics driving yield and warranty risk; translate measurement data into process improvement. Manufacturing and Quality Support • Support root cause investigation of dimensionally-driven nonconformances and field issues; provide the measurement evidence that separates a real defect from a measurement artifact., • Contribute measurement capability inputs to PFMEA and Control Plans across product value streams., • Support facility moves, new line bring-up, and capacity expansion with layout, equipment, and inspection method planning., • Maintain dimensional traceability on serialized assemblies so that every unit has a complete, retrievable measurement history. Additional duties and responsibilities as assigned, needed, or required for the business. Qualifications Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Qualifications include: • Education, Experience and Certifications, • Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, Industrial Technology, or a related technical discipline. Equivalent combination of technical training and directly relevant metrology experience will be considered., • Five or more years of hands-on dimensional metrology experience in a precision manufacturing environment — aerospace, defense, medical device, energy equipment, semiconductor capital equipment, or comparable., • Experience working directly with external suppliers, including on-site assessment, source inspection, and corrective action., • Experience in AS9100, ISO 9001, or NADCAP-governed quality systems is preferred., • Electric machine or precision electromechanical assembly experience (stator, rotor, magnet assembly, or air gap control) is preferred., • Experience supporting a product through the transition from prototype to serial production is preferred., • ASQ CQE, CCT, or CMI certification is preferred, as is NIST or A2LA metrology training., • Skills and Abilities, • Demonstrated expertise in GD&T per ASME Y14.5, including datum structure design and tolerance interpretation, not just callout reading., • Direct programming and operating experience with coordinate measuring machines (PC-DMIS, Calypso, Polyworks, Modus, or equivalent)., • Working command of Measurement Systems Analysis — Gage R&R, bias, linearity, stability — and the ability to defend a measurement system to a customer or auditor., • Experience designing or specifying inspection fixtures and holding methods for complex geometry., • Practical knowledge of calibration systems and traceability requirements (ISO/IEC 17025, ANSI/NCSL Z540, or equivalent)., • Ability and willingness to travel to supplier and Hyliion sites, primarily domestic with some international travel. Travel is typically 20-25% and runs higher during new supplier qualification or capability build-out., • Experience measuring additively manufactured components, including internal geometry verification by CT or industrial radiography, is preferred., • Structured-light or blue-light scanning experience (ATOS, Zeiss, Creaform) and point cloud to CAD comparison methods are preferred., • A form and surface metrology background (roundness, cylindricity, straightness, and profilometry on bearing-class surfaces) is preferred., • Familiarity with AS9102 First Article Inspection and AIAG PPAP submission requirements is preferred., • Model-Based Definition and PMI implementation experience is preferred. Role Classification and Working Conditions This is a salaried, exempt-level position. This position typically works in an office environment; and given the nature of our business is also exposed to operations/warehouses/production environments. Physical/Other Requirements • Split time across office, metrology lab, production floor, and supplier manufacturing environments., • Required use of personal protective equipment in shop, laboratory, and supplier facility settings., • Ability to lift and position fixtures and components up to 40 lbs., • Extended periods of standing, and occasional work in confined or elevated positions during equipment setup and inspection., • Ability to travel by air 25–50% of the time, primarily domestic with occasional international travel., • Ability to travel internationally is an essential requirement of this position. Candidates must possess or be able to timely obtain and maintain valid documentation necessary for required international business travel. Benefits: • Medical Plans, with PPO or HDHP options, • Dental Plans, with buy-up option, • Vision Plan, • Life Insurance and Accidental Death & Dismemberment Plans, with buy-up options, • Short Term Disability, paid for by the company, • Long Term Disability, paid for by the company, • Flexible Spending Accounts (FSA), • Health Savings Account (HSA), • 401k/Roth 401k, • Voluntary Accident Plans, • Voluntary Critical Illness Plans, • Hospital Indemnity Plan Hyliion is proud to be an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, age, disability, veteran status. If a reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to otherwise participate in the employment selection process, please direct your inquires to Hyliion's human resources department at HR@hyliion.com.

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description This position is located at a Semiconductor Manufacturing Facility. Position Purpose: Work is performed in industrial settings including: assembly plants, metal fabrication plants, refineries, and power train plants. Collect, sort and transport disposables and recyclables including: trash, hazardous waste, scrap metal and other waste streams throughout a facility to designated container and location. Primary Duties/Responsibilities: • Perform job duties in a safe manner compliant with policies, procedures and practices., • Maintain a safe, neat and clean work environment this includes: work area, equipment, locker rooms, break rooms, and office areas., • Model professional behavior at all times; report to work as scheduled, on time and prepared to work., • Collect trash, recyclables and hazardous waste from various locations throughout the facility., • Breakdown scrap parts for repair or recycling., • Transport waste/recyclables to disposal container and/or storage location., • Load semi-trailers and roll-off boxes for shipment to landfill or recycling center., • Maintain storage areas, and drum pads in accordance to regulations., • Document and inform the manager or designated person of any contamination in recycling containers., • Complete reports and documentation correctly and submit timely as directed., • Participate in meetings to access the work environment for safety and effectiveness., • Operate equipment safely and compliant with policies including: fork-trucks, tuggers, and transport carts., • Perform preventive maintenance (PM) and safety checks on mobile equipment before and after operating; report any defects appropriately and timely., • Demonstrate a commitment to learning and development; stay current of safe work practices, policies and regulations., • Work effectively in a team environment and provide support and assistance to others., • Commitment to promoting and creating a safety culture and positive work environment., • Perform other job duties as requested to support the business operations. Work Environment: Must be able to work in loud, cold, hot, wet, and dry environments. Qualifications Education/Experience/Background: • High School diploma or GED., • Experience operating a forklift or similar equipment desired. Knowledge/Skills/Abilities: • Able to read and understand instructions in English. Required Certification/Licenses/Training: • Must have a valid driver’s license., • Successfully complete drug screen and pre-employment physical, safety sensitive background check. Physical Requirements: • Push/pull and frequently lift and carry up to 40 lbs., • Manual dexterity to manipulate small hand tools, pick up and sort small parts., • Lift, carry, push or pull equipment of various size, shape, and weight., • Able to sit periodically and for extended periods of time, climb ladders/stairs, reach below knees and above shoulders, kneel and crawl to access work areas., • Frequent standing, walking, bending, and stooping, able to reach forward and grasp equipment, • Ability to balance and walk on wet and slick surfaces, metal grates, narrow platforms, and uneven surfaces. Additional Information Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Description About Rugiet Rugiet is a fast-growing, Austin-based direct-to-consumer telemedicine company reinventing men's health. We combine clinical rigor, luxury service, and a modern digital experience to deliver personalized, compounded treatments at scale. We're not here to blend in. We're building the future of healthcare and we move fast. Role Summary Rugiet is a leader in modern men's health, known for disrupting the industry with patented, clinical solutions like Ready. As we scale into new categories — from sleep and hair loss to weight management — we need a Senior Growth Marketing Manager to own the strategy for one of our largest channels, Paid Social, with oversight of emerging performance channels including AppLovin, CTV, and TV. This is not a role for someone who wants to live inside Ads Manager. As AI-driven automation increasingly manages day to day campaign tuning, the job has shifted: less time in the weeds of manual channel management, more time architecting the testing agenda, proving what's actually working through incrementality and lift testing, and shaping the creative strategy that drives performance. You think like a strategist first and a channel operator second. You'll manage an 8-figure annual budget across Meta, TikTok, and emerging placements, with a relentless focus on efficient CAC — but at Rugiet, growth isn't just about spending well. It's about building a machine that turns rigorous testing into insight, and insight into scalable revenue. Key Deliverables • Full-Funnel & Cross-Channel Ownership: Own the end-to-end strategy for Paid Social (Meta, TikTok) as the core channel, plus oversight of emerging channels — AppLovin, CTV/TV — building test-and-learn programs as each matures into a scalable spend line., • AI-Native Operator: You're AI-pilled and use automation to eliminate the manual, repetitive work that used to define this role, freeing you to focus on strategy, testing design, and creative direction instead of bid-level micromanagement., • Budget & Efficiency at Scale: Manage an 8-figure annual budget with a relentless focus on CAC targets, while thinking beyond platform-reported efficiency to true incremental impact., • Tight Creative Strategy Partnership: Partner closely with creative strategists as a genuine thought partner — not just a requester of assets. Bring performance data, audience insight, and channel-specific attention dynamics into the creative process, and guide how "thumb-stopping" creative logic should flex across paid social, CTV, and other emerging formats, each with fundamentally different attention economics., • Testing & Measurement Rigor: Design and run conversion lift tests and incrementality tests to validate true channel and campaign impact — independent of platform-reported attribution. Maintain fluency across attribution methodologies (MTA, MMM, geo-holdout, ghost ads/PSA tests) and know when each is the right tool for the question at hand., • Data Integration: Work with our Analytics team to refine attribution models and build a measurement framework that holds up as the channel mix and privacy landscape keep shifting., • Scale a Multiproduct Portfolio: Drive new product go to market testing via Paid Social, and own the evolution of campaign structure to scale both core and new products., • Landing Page Strategy: Collaborate with the Digital Product team to optimize post-click experiences, ensuring landing pages convert at peak efficiency., • Compliance Stewardship: Ensure all creative and targeting strategies adhere to healthcare regulations (FDA, FTC, and HIPAA).Culture Fit, • Solutions-First Mindset: When platform changes (like iOS updates) happen, you don't just report the drop in performance; you engineer a workaround., • Radical Accountability: You own your numbers. You are the first to flag a performance dip and the first with a plan to fix it., • Urgency is the Default: We move fast. You thrive in an environment where a testing cycle lasts days, not months., • Strategic Curiosity: You are constantly exploring emerging platforms and channels — AppLovin, CTV, and beyond — to keep Rugiet at the cutting edge of D2C growth.Requirements, • Experience: 6+ years of hands-on experience in performance marketing, with at least 3+ years directly owning strategy for high-scale Paid Social accounts (D2C subscription and/or telehealth preferred)., • Testing & Measurement Fluency: Demonstrated experience designing and interpreting conversion lift and incrementality tests (Meta Conversion Lift, geo-holdout, ghost ads, or similar), and working knowledge of multiple attribution frameworks — comfortable explaining why platform-reported ROAS and MMM/incrementality results diverge, and which to trust when., • Strategic Over Tactical: Platform fluency in Meta and TikTok Ads Manager is expected, but this role is evaluated on testing strategy and creative judgment, not manual optimization skill. Experience leveraging automation or AI tooling to reduce time spent on channel mechanics is a strong plus., • Creative Partnership Track Record: Proven experience pairing closely with creative teams or strategists to shape, not just request, high-performing creative, with a clear point of view on how creative logic should differ by channel (social feed vs. CTV vs. app-install contexts)., • Analytical Prowess: Advanced skills in Excel/Google Sheets and BI tools (Looker, Tableau). Comfortable building your own performance dashboards., • Scale Capability: Experience managing annual spend in the 8-figure range while maintaining strict efficiency goals., • Emerging Channel Curiosity: Experience with or strong interest in CTV, AppLovin, or TV — you don't need to be an expert on day one, but you need to want to build this muscle., • (Ideal) Healthcare Experience: Previous experience in a regulated industry or telemedicine is a big advantage.To Apply If you are a performance-obsessed marketer excited by the opportunity to scale a high-growth healthcare brand by architecting data-driven, cross-channel growth strategies and running a rigorous testing agenda rather than just managing budgets, we want to hear from you. Please submit your resume and a cover letter detailing your experience in incrementality/lift testing, your approach to creative strategy partnership, and why you are the right person to drive Rugiet's next phase of growth.

Job Description The Building Engineer is responsible for the operation, maintenance, repair, and monitoring of building systems, including HVAC, electrical, plumbing, mechanical, and life safety systems. This role ensures facilities operate safely, efficiently, and in compliance with company standards and regulatory requirements. The Building Engineer performs preventive maintenance, responds to service requests, and supports overall building performance to provide a safe and comfortable environment for occupants. Pay: $30- $35 per hour. The pay listed is the hourly range or the hourly rate for this position. A specific offer will vary based on applicant’s experience, skills, abilities, geographic location, and alignment with market data. 401(k) – You become eligible to make personal contributions beginning the first of the month following 30 days of employment. You become eligible for the ABM match beginning the first of the month following six months of employment. ABM matches your pre-tax and/or Roth contributions, dollar for dollar, for the first 3%. For the next 2%, ABM contributes $0.50 for each dollar you contribute. Your contributions and match are immediately vested. Benefits: ABM offers a comprehensive benefits package. For information about ABM’s benefits, visit ABM Employee Benefits: Staff & Mgmt Responsibilites • Operate, maintain, troubleshoot, and repair building systems, including HVAC, electrical, plumbing, lighting, and mechanical equipment., • Perform preventive maintenance inspections according to established schedules and procedures., • Monitor building automation systems (BAS) and respond to system alarms and abnormalities., • Inspect equipment, identify deficiencies, and recommend corrective actions., • Respond promptly to tenant and facility service requests., • Coordinate and oversee work performed by third-party contractors and vendors., • Maintain accurate maintenance records, work orders, and equipment documentation., • Conduct routine building inspections to ensure operational efficiency and regulatory compliance., • Support emergency response efforts and participate in after-hours on-call rotations as required., • Ensure compliance with OSHA regulations, local building codes, environmental standards, and company safety policies., • Assist with capital improvement projects, equipment upgrades, and energy management initiatives., • Monitor utility consumption and identify opportunities for energy conservation and cost reduction., • Maintain inventory of maintenance supplies, tools, and replacement parts.Qualifications Required, • High school diploma or GED required., • 3+ years of experience in commercial building maintenance, facilities management, or a related field., • Working knowledge of HVAC, electrical, plumbing, mechanical, and building automation systems., • Ability to read and interpret blueprints, schematics, and technical manuals., • Strong troubleshooting and problem-solving skills., • Proficiency with computerized maintenance management systems (CMMS) and Microsoft Office applications., • Ability to lift up to 50 pounds and perform physical tasks, including climbing ladders and working in confined spaces., • Excellent customer service and communication skills.Preferred, • Associate degree or technical certification in Engineering, Facilities Management, HVAC, Electrical Technology, or related field., • Universal EPA Certification., • Stationary Engineer, Building Operator Certification (BOC), or similar industry credential., • Experience with commercial office, healthcare, industrial, or multi-tenant facilities., • Knowledge of energy management and sustainability practices.Skills & Competencies, • Mechanical aptitude, • Preventive maintenance expertise, • HVAC systems knowledge, • Electrical troubleshooting, • Safety awareness, • Vendor management, • Customer service orientation, • Time management and organization, • Critical thinking and problem-solving, • Attention to detailWork Environment, • Primarily works within commercial or industrial building environments., • May require occasional evening, weekend, holiday, or emergency response coverage., • Exposure to mechanical equipment, electrical systems, varying temperatures, and noise levels. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.Privacy PolicyTerms of UseCalifornia Privacy RightsEmployee Privacy Notice EnglishEmployee Privacy Notice Spanish

Job Description About LegalZoom LegalZoom has been providing accessible and affordable online legal services for over 20 years. Since 2001, we’ve helped millions of customers launch, run, and grow their businesses, secure their intellectual property, and protect their loved ones with estate planning documents. As the industry leader in business formations, innovation remains at the center of all we do. LegalZoom employees are creative thinkers and problem-solvers who thrive on collaboration and embrace diversity, equity, and inclusion. Together, we’re working to make a positive impact on the world. Where we work In an effort to foster a better work-life balance, LegalZoom is committed to a remote-first work environment. Our Austin, Beaverton, Frisco, LA Metro, and SF Bay Area offices allow our Zoomers to collaborate with teammates and offer special onsite events, lunches, and more. Overview The Sr. Performance Marketing Manager will own all aspects of both in-house and agency-executed Programmatic campaigns — from strategy and planning through execution, measurement, and executive reporting. You will plan and execute Programmatic media campaigns across multiple platforms (e.g. Google Ads, The Trade Desk), independently developing media strategy, creative briefs, and a testing roadmap grounded in data. You will serve as the internal subject matter expert for Programmatic, driving a multi-quarter channel roadmap and representing the channel confidently to cross-functional partners and senior leadership. This role requires a proactive, strategic operator who can manage complex workstreams, communicate with clarity at all levels of the organization, and leverage AI and automation to increase speed and analytical rigor. You will Campaign Planning & Execution Plan and execute paid acquisition campaigns across all Programmatic channels (Display, Video, CTV, Native, Audio, etc.) on platforms including Google Ads, The Trade Desk, and others, with full accountability for CPA and ROAS goals Manage a combination of in-house executions, agency-led campaigns, and Direct IO partnerships Ensure campaigns are set up for successful execution end-to-end — including tagging, creative briefs, measurement frameworks, and QA Strategy & Channel Ownership Independently develop and own the Programmatic channel roadmap, translating business objectives into a prioritized, quarter-over-quarter plan Identify whitespace opportunities, make investment recommendations, and proactively bring forward strategic proposals — without waiting to be asked Stay current on industry trends, emerging platforms, and best practices; bring a point of view on where Programmatic is going and how LegalZoom should respond Testing & Optimization Prioritize and execute a continuous testing calendar across audiences, creatives, placements, and partners to generate actionable insights and improve performance Build, monitor, and report on all relevant KPIs (sessions, engagement, conversions, revenue, CPA, ROAS), using data-driven insights to optimize campaigns and make strategic recommendations Demonstrate deep understanding of advanced attribution models — including multi-touch attribution (MTA) and marketing mix modeling (MMM) — and apply that knowledge to campaign measurement strategy and investment decisions Design and interpret incrementality tests (e.g. geo holdouts, conversion lift studies) to validate channel impact and inform budget allocation beyond last-touch signals Leverage brand lift studies to measure awareness and consideration impact of upper-funnel Programmatic investments, connecting brand signals to performance outcomes Partner with Data Science and Analytics teams to advance MTA, MMM, incrementality, and brand lift capabilities at scale Stakeholder Communication & Reporting Own reporting cadences for Programmatic performance — preparing clear, executive-ready updates that translate data into narrative, highlight business impact, and surface decisions that require leadership input Communicate proactively and confidently with senior stakeholders, both in written updates and verbal presentations; tailor communication style and altitude to the audience Maintain and evolve reporting templates with insights across campaign, tactic, audience, and inventory dimensions Project Management & Cross-Functional Execution Manage multiple concurrent workstreams with rigor — tracking milestones, flagging risks early, and holding yourself and partners accountable to deadlines Drive cross-functional initiatives with Creative, Data Science, Product Marketing, Dev, and other Growth Marketing teams; own your part of collaborative projects from briefing through delivery Proactively identify blockers and dependencies before they become problems; surface solutions, not just issues AI & Marketing Technology Actively leverage AI tools (e.g. Claude, ChatGPT, platform-native AI features) to accelerate analysis, improve creative iteration, and automate repeatable workflows Evaluate, pilot, and advocate for new AI-enabled capabilities within the Programmatic stack; help build team fluency by sharing what works Drive martech best practices including trafficking workflows, data and API integrations, and platform-specific tagging requirements You have 7-9+ years of hands-on Performance Marketing experience, with a track record of owning channel strategy — not just executing against it Recent hands-on-keys experience with Google Ads (Display and YouTube) and The Trade Desk required; experience on additional DSPs and Paid Social platforms (Meta, TikTok, Reddit, LinkedIn) preferred Demonstrated ability to independently build and communicate a multi-quarter channel roadmap to senior stakeholders — including written briefs, executive presentations, and performance narratives Strong project management skills: experience managing complex, multi-workstream projects with clear milestones, stakeholder accountability, and on-time delivery Excellent written and verbal communication skills; proven ability to present performance results and strategic recommendations to senior leadership clearly and with confidence A proactive operating style — you identify gaps, raise opportunities, and move work forward without waiting for direction Hands-on experience using AI tools (generative AI, automation, platform-native AI features) to improve marketing output and efficiency; interest in building new AI-enabled workflows

Job DescriptionCNC Machine OperatorJob Description For over 20 years, Apparent Technologies has been a leading engineering and manufacturing company supporting the semiconductor industry. We are currently seeking Full-Time CNC Machine Operators to join our team at our Austin, TX facility. We are hiring for both Second Shift (3 PM – 11:30 PM) and Third Shift (Friday to Sunday 7 am-7 pm) positions. Competitive hourly pay is based on experience and qualifications, along with the comprehensive benefits listed below. Candidates with experience in CNC machining, precision manufacturing, semiconductor manufacturing, aerospace, or medical device manufacturing will be given priority during the interview process. We offer ongoing training, advancement opportunities, and the chance to build a long-term career in a growing, technology-driven manufacturing environment. Benefits of the CNC Machine Operator Position • Paid Time Off, • Career Growth Opportunities, • Health Insurance, • Vision Insurance, • Dental Insurance, • 401(k), • Various benefits through the ADP Marketplace, including discounts on shopping, travel, and even pet insuranceResponsibilities (Included, but not limited to), • Machine Operation: Set up, operate, and monitor CNC mills, lathes, and other CNC equipment to manufacture precision components according to engineering drawings and customer specifications., • Blueprint Interpretation: Read and interpret blueprints, engineering drawings, work instructions, and GD&T requirements to ensure accurate part production., • Machine Setup: Load raw materials, fixtures, tooling, and workholding devices while ensuring proper machine setup prior to production., • Program Execution: Load and execute CNC programs, verify machine operations, and make approved offsets or adjustments to maintain dimensional accuracy and maximize efficiency., • First Article & In-Process Inspection: Perform first-piece inspections and routine in-process measurements using precision measuring equipment including calipers, micrometers, indicators, gauges, and other inspection tools., • Quality Assurance: Verify finished parts meet customer specifications, identify nonconforming parts, and communicate quality concerns to supervisors or programming personnel., • Machine Monitoring: Continuously monitor machine performance, tool wear, coolant levels, and production output while making adjustments as needed to maintain quality and productivity., • Preventative Maintenance: Perform daily machine maintenance, cleaning, lubrication, and basic troubleshooting to keep equipment operating efficiently., • Safety & Housekeeping: Maintain a clean, organized, and safe work environment while following all company safety procedures and PPE requirements., • Team Collaboration: Work closely with programmers, machinists, quality inspectors, engineering, and production leadership to improve processes and support on-time delivery.Qualifications, • Experience: Minimum of 2 years operating CNC machining equipment in a manufacturing environment., • Education: High school diploma or equivalent required. Technical certification or degree in Precision Machining, Manufacturing Technology, Engineering Technology, or a related field is preferred., • Technical Knowledge:, • CNC machine operation, • Blueprint reading, • GD&T (Geometric Dimensioning & Tolerancing), • Precision measuring equipment, • Shop mathematics, • Machine setup and tooling, • Understanding of machining practices, • Basic CNC programming knowledge, • CAD/CAM experience preferred, • Mastercam experience is a plus, but not required, • Skills:, • Strong mechanical aptitude, • Excellent attention to detail, • Effective communication and teamwork skills, • Strong troubleshooting and problem-solving abilities, • Ability to work independently while maintaining production quality, • Willingness to continuously learn and help train others, • Additional Qualifications:, • Completion of a machining apprenticeship or equivalent hands-on machining experience preferred.Physical Requirements, • Ability to lift up to 50 pounds, • Ability to stand, walk, bend, and work throughout an entire shift, • Manual dexterity required to safely operate machinery and precision measuring instruments, • Ability to work safely around moving machinery while wearing required Personal Protective Equipment (PPE), • Comfortable working in a fast-paced manufacturing environmentAbout Us Founded in 2004, Apparent Technologies, Inc. provides precision machining, engineering, design, orbital welding, and high-purity manufacturing services for the semiconductor industry. We specialize in Hastelloy HC22, stainless steel fabrication, and complex UHP gas delivery systems. As an ISO 9001-certified manufacturer with a Class 100 Cleanroom, we utilize patented, state-of-the-art welding and monitoring technologies that distinguish us from other manufacturers. Our experienced team proudly serves local, regional, and international customers from our Austin, Texas facility while maintaining an unwavering commitment to quality, innovation, and continuous improvement.

Job Description Galls® proudly serves America’s Public Safety and Military professionals by combining the broadest selection of uniforms, equipment and solutions in the industry with relentless customer service. With a national footprint of more than 160 locations and over 1,800 associates, Galls is the largest retailer specializing in Public Safety. Over one million Law Enforcement, Firefighting, Emergency Medical, Federal, Military, Corrections, Security, Postal, Public Transportation, and other essential workers each year trust Galls as their service provider. As a Seamstress and Embroidery Operator at Galls you will be hands-on altering our nation’s Public Safety professionals’ uniforms and equipment. You will ensure all measurements and fittings are done properly, accurately, and efficiently – so that they can wear that uniform proudly and utilize embroidery machine(s) to place logos and personalization on garments, hats, and name-strips. At Galls, we are P.R.O.U.D. to Serve, and it all starts on our Production and Value-Added Service Team. WHAT YOU WILL DO • Read and accurately identify the customer’s needs per the Work Instruction Document, • Take necessary measurements and mark garments for alterations with ability to problem solve individual sizing issues, • Operate a heat press safely and efficiently, • Perform uniform sewing, alternations, and embellishments with accuracy and efficiency to include taking up stride, lengthening/shortening tails on shirts, tapering shirts, adjusting waists, hemming trousers, mending tears, replacing zippers, applying patches, applying name strips, applying striping, and applying patches, • Complete adjustments to embroidery set ups., • Operate embroidery machines and Perform minor machine repairs if needed., • Operate industrial sewing machinery and meet production deadlines, • Inspect merchandise against order specifications, • Other duties may be assigned to meet business needs WHAT YOU WILL BRING • High school diploma or GED equivalent required, • Previous experience in Alterations and with embroidering preferred., • Well-versed in industrial Sewing machines preferred., • Ability to effectively read/receive work instructions in English, • Extremely detail-oriented and quality-focused – you’re not happy with mistakes, • Solid communication (both written and verbal) and interpersonal skills, • Ability to stand or sit for long periods of time, bend, stretch, twist, and lift, with or without reasonable accommodation WHAT YOU SEND OUR WAY • Your resume, highlighting your education, experience, and skills WHAT WE OFFER • Excellent medical/dental and vision coverage—Eligible 1st day of the month after start date, • 401(k) retirement plan with company contribution (because you will retire someday), • Flexible benefits—choose what you like, ignore the rest, • Generous employee discount, • Vacation and Personal Time, • Paid Holidays, • Tuition reimbursement, • Daily Pay: up to 50% of your pay EOE/Disability/Vets

Cleanliness and Friendliness! The MCR standard is to provide clean, friendly, well-organized and safe hotels for our guests. Areas of Excellence: • Happy Guests, • Spotless Cleanliness, • Product Consistency & Quality, • Teamwork Duties and Expectations: 1. Happy Guests • Guest Relations: Greet guests happily upon arrival and throughout their stay with a smile., • Name Use: Use the guests' names whenever possible, ensuring they feel properly welcomed., • Guest Satisfaction: All Team Members work together to contribute to great guest satisfaction scores., • Recovery: Ability to handle challenging guest situations with hospitality and a sense of urgency., • Hotel Knowledge: Strong knowledge of all features of the hotel facility and amenities., • Events: Awareness and support for all groups and events at the hotel., • Technology: Understanding of relevant technology for each role., • Phone Etiquette: Answer all incoming calls with friendly service using the approved greeting. 1. Spotless Cleanliness • Sparkling Clean Workspaces: All areas, both front and back of the house, should be kept clean and well-organized., • Pitching In: Cleanliness is a team effort! Everyone may expect to pitch in to clean guest rooms and public spaces as needed, to ensure the hotel is well-organized and safe., • Hospitality While Cleaning: Always greet every guest happily with a smile, by name if possible, while cleaning. 1. Product Consistency & Quality • Checklists to 100% Accuracy: All operational checklists are completed accurately and at the designated times, every shift., • Shift Handover Reports: Handover reports must be accurate and on time, for effective shift-to-shift communication., • Flawless Uniform: All Team Members must wear a clean, approved uniform and be well-groomed per the Team Member Handbook, while wearing a nametag and smiling at all times. 1. Teamwork • Communication: Communication between Team Members should be clear, honest, and professional., • Can Do Attitude: Willing to stretch beyond traditional role to meet the needs of the business and MCR's guests., • Collaboration: All Team Members at all levels must be committed to working together to create a welcoming environment for guests and an effective, positive workplace. Other Duties and Expectations: • Audit Management: All hotel audit-related reports must be completed and sent out by the designated time on the overnight checklist., • Security: Overnight security measures should be followed to ensure a safe environment for all team members and guests including, but not limited to locking exterior entrances at the designated times, following protocols for late arriving guests, following procedures for handling safety and security issues., • Incoming Mail: Receive and note all incoming mail as required per the daily shift checklist. Success Metrics: Happy Guests: • Management Performance Ratings, • Guest Satisfaction Scores/Intent to Return Spotless Cleanliness: • GM/AGM Spot Checks, • Leadership Walk-throughs (RVP, etc.), • Guest Ratings/Reviews Product Consistency & Quality: • Checklist Tracking, • Management Performance Ratings, • Guest Ratings Teamwork: • Management Performance Ratings Qualifications & Requirements: • Experience in a hospitality, service, consumer-facing franchise or related field preferred., • Can-Do Attitude: Must have a positive attitude and willingness to learn., • Ability to Follow Guidelines: Must be able to understand and follow established guidelines and procedures., • Handle Pace and Pressure: Must work well in stressful, high-pressure situations., • Listening, Conflict Resolution: Must be effective at listening to, understanding, clarifying, and resolving the concerns and issues raised by co-workers and guests., • Communication Skills: Must be able to convey information and ideas clearly., • Hospitality and Guest Service: Must have a desire to serve all guests., • Age Requirement: Must be 18 years of age or older to perform this job., • Schedule and Travel: Must be willing to work a varied schedule that may include evenings, nights, weekends, and holidays based upon the demands of the hotel., • Clock-in/Out: Arrive and clock in on time for every shift worked and clock out at the scheduled shift ending time, unless otherwise directed by your immediate supervisor. Never work while off the clock., • Breaks: Clock in/out for breaks at the designated time on your schedule., • Call Outs: Provide sufficient notice as directed by your supervisor when calling out for a scheduled shift. Physical Working Demands & Working Environment: The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to: • Stand or remain in a stationary position for long periods of time (3-4 hours at a time)., • Type on and operate computers and other office machinery or devices, do 10-key operation and data entry, dial a telephone, manually manipulate objects, handles, tools, and/or controls., • Bend, stoop, crouch, lift and transport supplies of up to 25 pounds throughout the hotel, and move throughout the hotel and the rooms., • Inspect and visually observe details at close range (within a few feet) and from long range. The noise level in the work environment is usually moderate (phone ringing, and heavy communication between co-workers and customers). Language + Reasoning Skills: • Read, write, understand and communicate with others effectively using the English language. Note: This job description in no way states or implies that these are the only duties to be performed by the employee(s) of this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. Employee must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodations will be made to enable employees with disabilities to perform the essential functions of their job, absent undue hardship. The Employer retains the right to change or assign other duties to this position. This document does not create an employment contract, implied or otherwise, other than an at-will relationship. Our Company: • MCR is the 3rd-largest hotel owner-operator in the United States., • Founded in 2006, our company has offices in New York City, Dallas, Chicago, and Richmond, Virginia., • MCR has a $5.0 billion portfolio of 148 premium-branded hotels containing more than 22,000 guestrooms across 37 states and 106 cities., • MCR has more than 7,000 team members across the country and operates hotels under 9 Marriott brands, 8 Hilton brands and a number of unflagged independent hotels., • MCR was named one of Fast Company's 10 Most Innovative Travel Companies of 2020., • MCR is a three-time recipient of the Marriott Partnership Circle Award, the highest honor Marriott presents to its owner and franchise partners, and a recipient of the Hilton Legacy Award for Top Performer., • For the TWA Hotel at New York's JFK Airport, MCR won the Development of the Year (Full Service) Award at The Americas Lodging Investment Summit (ALIS), the Urban Land Institute New York Excellence in Hotel Development Award and the American Institute of Architects national Architecture Award, the highest

Service Technician Greystar is a leading, fully integrated global real estate platform offering expertise in property management, investment management, development, and construction services in institutional-quality rental housing. Headquartered in Charleston, South Carolina, Greystar manages and operates over $350 billion of real estate in more than 260 markets globally with offices throughout North America, Europe, South America, and the Asia-Pacific region. Greystar is the largest operator of apartments in the United States, managing over one million units/beds globally. Across its platforms, Greystar has nearly $79 billion of assets under management, including over $34 billion of development assets and over $36.5 billion of regulatory assets under management. Greystar was founded by Bob Faith in 1993 to become a provider of world-class service in the rental residential real estate business. This position performs technical and mechanical work that ensures the physical aspects of the buildings, grounds, amenities, and common areas of the property meet the Company's standards for cleanliness, appearance, safety, and overall functionality. Essential Responsibilities: • Completes assigned work orders generated from resident requests for service, as well as preventative maintenance on the property by diagnosing the source or cause of the defect or problem, and making repairs in accordance with established policies, procedures, safety standards, and code requirements., • Completes the "make-ready" process to prepare vacant apartment homes for leasing and new move-ins by completing the pre-move-out inspection, creating a "punch" list of maintenance work needed, scheduling vendors and contractors as needed, obtaining needed supplies and materials, completing all maintenance tasks, and inspecting completed work., • Follows procedures for accessing and obtaining materials, supplies, equipment, tools, and other items from the property's maintenance department by tracking inventory used, returning unused items to the established location, and notifying the maintenance supervisor about re-ordering needs., • Completes documentation and other paperwork in a timely, accurate, and complete fashion so that service requests can be appropriately documented and tracked., • Assists in maintaining the grounds, common areas, and amenities by picking up trash and debris, pressure-washing breezeways and pool areas, performing general cleaning, and painting curbs and signage as needed., • Supports cost-cutting and expense control programs by fixing rather than replacing parts when possible, not being wasteful with materials and supplies, and practicing the correct use for tools and equipment. Physical Demands: • Incumbents need to be able to stand, walk, and/or sit for extended periods of time and bend, stoop, climb ladders, reach, carry objects, and crawl in confined areas., • Incumbents must be able to work inside and outside in all weather conditions (rain, snow, heat, hail, wind, sleet)., • Incumbents must be able to push, pull, lift, carry, or maneuver weights of up to twenty-five (25) pounds independently and fifty (50) pounds with assistance., • Rare or regular travel may be required to assist other properties as needed, attend training classes, business meetings, or other situations necessary for the accomplishment of some or all of the daily responsibilities of this position., • Incumbents must be able to work a flexible work schedule, which includes taking "call" during evenings, weekends and holidays. Required Licenses or Certifications: • Incumbents must have EPA certifications Type 1 and II or Universal for refrigerant recycling. (Applies to Certified Service Technicians.), • Incumbents must have all certifications as required by State and Local jurisdictions. (Applies to all Service Technicians.), • Incumbents must have valid driver's license to operate a golf cart on property depending on the property size, if applicable. The hourly range for this position is $22.79 - $23.79. Additional Compensation: • Many factors go into determining employee pay within the posted range including business requirements, prior experience, current skills and geographical location., • Corporate Positions: In addition to the base salary, this role may be eligible to participate in a quarterly or annual bonus program based on individual and company performance., • Onsite Property Positions: In addition to the base salary, this role may be eligible to participate in weekly, monthly, and/or quarterly bonus programs. Robust Benefits Offered*: • Competitive Medical, Dental, Vision, and Disability & Life insurance benefits. Low (free basic) employee Medical costs for employee-only coverage; costs discounted after 3 and 5 years of service., • Generous Paid Time off. All new hires start with 15 days of vacation, 4 personal days, 10 sick days, and 11 paid holidays. Plus your birthday off after 1 year of service! Additional vacation accrued with tenure., • For onsite team members, onsite housing discount at Greystar-managed communities are available subject to discount and unit availability., • 6-Week Paid Sabbatical after 10 years of service (and every 5 years thereafter)., • 401(k) with Company Match up to 6% of pay after 6 months of service., • Paid Parental Leave and lifetime Fertility Benefit reimbursement up to $10,000 (includes adoption or surrogacy)., • Employee Assistance Program., • Critical Illness, Accident, Hospital Indemnity, Pet Insurance and Legal Plans., • Charitable giving program and benefits. *Benefits offered for full-time employees. For Union and Prevailing Wage roles, compensation and benefits may vary from the listed information above due to Collective Bargaining Agreements and/or local governing authority. Greystar will consider for employment qualified applicants with arrest and conviction records. Greystar is an equal opportunity employer and does not discriminate in employment on the basis of race, color, religion, sex (including pregnancy, sexual orientation, and gender identity), national origin, age, disability, genetic information, military or veteran status, or any other characteristic protected by applicable law. Important Notice: Greystar will never request your banking details or other sensitive personal information during the interview process. Greystar does not conduct any interviews via text or messaging, and all communication will come from official Greystar email addresses (@greystar.com). If you receive suspicious requests, please report them immediately to AskHR@greystar.com.

Greystar is a leading, fully integrated global real estate platform offering expertise in property management, investment management, development, and construction services in institutional-quality rental housing. Headquartered in Charleston, South Carolina, Greystar manages and operates over $350 billion of real estate in more than 260 markets globally with offices throughout North America, Europe, South America, and the Asia-Pacific region. Greystar is the largest operator of apartments in the United States, managing over one million units/beds globally. Across its platforms, Greystar has nearly $79 billion of assets under management, including over $34 billion of development assets and over $36.5 billion of regulatory assets under management. Greystar was founded by Bob Faith in 1993 to become a provider of world-class service in the rental residential real estate business. This position performs technical and mechanical work that ensures the physical aspects of the buildings, grounds, amenities, and common areas of the property meet the Company's standards for cleanliness, appearance, safety, and overall functionality. Essential Responsibilities: • Completes assigned work orders generated from resident requests for service, as well as preventative maintenance on the property by diagnosing the source or cause of the defect or problem, and making repairs in accordance with established policies, procedures, safety standards, and code requirements., • Completes the "make-ready" process to prepare vacant apartment homes for leasing and new move-ins by completing the pre-move-out inspection, creating a "punch" list of maintenance work needed, scheduling vendors and contractors as needed, obtaining needed supplies and materials, completing all maintenance tasks, and inspecting completed work., • Follows procedures for accessing and obtaining materials, supplies, equipment, tools, and other items from the property's maintenance department by tracking inventory used, returning unused items to the established location, and notifying the maintenance supervisor about re-ordering needs., • Completes documentation and other paperwork in a timely, accurate, and complete fashion so that service requests can be appropriately documented and tracked., • Assists in maintaining the grounds, common areas, and amenities by picking up trash and debris, pressure-washing breezeways and pool areas, performing general cleaning, and painting curbs and signage as needed., • Supports cost-cutting and expense control programs by fixing rather than replacing parts when possible, not being wasteful with materials and supplies, and practicing the correct use for tools and equipment. Other Responsibilities: • Complies with Greystar's safety and risk-management policies by attending and participating in the property's routine safety meetings, completing required training on OSHA and other safety related laws and requirements, and by reporting accidents and incidents promptly and accurately., • May periodically inspect work performed by contractors, vendors and other service providers to verify the work, materials and services meet quality standards, scope and specifications as required., • Assists in conducting routine and periodic property inspections to identify safety and risk management concerns, keep the property in good repair, and communicate concerns about the physical needs of the property to management. Physical Demands: • Incumbents need to be able to stand, walk, and/or sit for extended periods of time and bend, stoop, climb ladders, reach, carry objects, and crawl in confined areas., • Incumbents must be able to work inside and outside in all weather conditions (rain, snow, heat, hail, wind, sleet)., • Incumbents must be able to push, pull, lift, carry, or maneuver weights of up to twenty-five (25) pounds independently and fifty (50) pounds with assistance., • Rare or regular travel may be required to assist other properties as needed, attend training classes, business meetings, or other situations necessary for the accomplishment of some or all of the daily responsibilities of this position., • Incumbents must be able to work a flexible work schedule, which includes taking "call" during evenings, weekends and holidays. Required Licenses or Certifications: • Incumbents must have EPA certifications Type 1 and II or Universal for refrigerant recycling. (Applies to Certified Service Technicians.), • Incumbents must have all certifications as required by State and Local jurisdictions. (Applies to all Service Technicians.), • Incumbents must have valid driver's license to operate a golf cart on property depending on property size, if applicable. The hourly range for this position is $22.00 - $24.00 Additional Compensation: • Corporate Positions: In addition to the base salary, this role may be eligible to participate in a quarterly or annual bonus program based on individual and company performance., • Onsite Property Positions: In addition to the base salary, this role may be eligible to participate in weekly, monthly, and/or quarterly bonus programs. Robust Benefits Offered*: • Competitive Medical, Dental, Vision, and Disability & Life insurance benefits. Low (free basic) employee Medical costs for employee-only coverage; costs discounted after 3 and 5 years of service., • Generous Paid Time off. All new hires start with 15 days of vacation, 4 personal days, 10 sick days, and 11 paid holidays. Plus your birthday off after 1 year of service! Additional vacation accrued with tenure., • For onsite team members, onsite housing discount at Greystar-managed communities are available subject to discount and unit availability., • 6-Week Paid Sabbatical after 10 years of service (and every 5 years thereafter)., • 401(k) with Company Match up to 6% of pay after 6 months of service., • Paid Parental Leave and lifetime Fertility Benefit reimbursement up to $10,000 (includes adoption or surrogacy)., • Employee Assistance Program., • Critical Illness, Accident, Hospital Indemnity, Pet Insurance and Legal Plans., • Charitable giving program and benefits. *Benefits offered for full-time employees. For Union and Prevailing Wage roles, compensation and benefits may vary from the listed information above due to Collective Bargaining Agreements and/or local governing authority. Greystar will consider for employment qualified applicants with arrest and conviction records. Greystar is an equal opportunity employer and does not discriminate in employment on the basis of race, color, religion, sex (including pregnancy, sexual orientation, and gender identity), national origin, age, disability, genetic information, military or veteran status, or any other characteristic protected by applicable law. Important Notice: Greystar will never request your banking details or other sensitive personal information during the interview process. Greystar does not conduct any interviews via text or messaging, and all communication will come from official Greystar email addresses (@greystar.com). If you receive suspicious requests, please report them immediately to AskHR@greystar.com.

At Dover Fueling Solutions (DFS), we are taking fueling and convenience retail to the next level. We are passionate about cultivating excellence in everything we do, but what really fuels us is our people. They're the heart of our company. As an employee, our promise to you is that you'll work on new and innovative products and solutions, be mentored by managers and teammates who are collaborative, caring, and act with integrity, and have the opportunity to grow in ways that are meaningful to you. Unique and interesting projects both locally and globally will challenge you and allow you to pursue different and rewarding career paths. DFS is part of a legacy of leadership that spans back generations, made up of some of the most trusted, leading-edge brands in the industry. As part of Dover Corporation and with our talented, innovative, outstanding people, we are doing great things and redefining what is possible in fueling and convenience retail. Providing advanced fuel-dispensing equipment, including clean energy solutions, systems and payment, automatic tank gauging and wet stock-management solutions, DFS comprises the product brands of Wayne Fueling Systems, OPW Fuel Management Systems, ClearView, Tokheim, ProGauge, Fairbanks, LIQAL, AvaLAN, and Bulloch Technologies. Headquartered in Austin, TX, DFS has a significant technology development and manufacturing presence worldwide, including facilities in Brazil, China, India, Italy, Poland, the Netherlands, the United Kingdom and the United States. The Test Operator II will work in a team-based manufacturing environment performing a wide variety of semi-repetitive or unique precision assembly operations where methods and sequence of assembly are described by production drawings or detailed written instructions. Responsibilities: • Perform troubleshooting activities related to wiring or assembly, • Advance in their job duties and abilities through on-the-job experience, • Perform the full range of duties necessary to test and diagnose units from other zones, • Work with Zone Team Members to execute daily tasks that are consistent with achieving the daily Task, • Promote Zone Safety Hazard avoidance according to training provided, PPE usage, • Execute and engage other peers in housekeeping responsibilities (6S experience) that are consistent with manufacturing initiatives, • Drives Quality and Continuous Improvement initiatives as they relate to the tasks in their respective zone, • Demonstrated ability to grasp and execute process-related activities, • Fully engaged in the Employee Suggestions Program driving not only suggestions in the respective zone but also engage other team members to provide suggestions as well., • Fully understand and engaged in the Zone Metrics Indicators to drive continuous improvement / problem solving in the zone; actively identifies detractors and records them on the Tier Production Boards., • Perform diagnostics using test stands and test protocols., • High School Diploma, GED or equivalent education level, • At least 1 year of experience in wiring assembly, • At least 1 year of experience in troubleshooting products, • Previous Technical electrical / electronic experience is preferable, • 3+ years of experience in Manufacturing environment is required, • Ability to understand and read working instructions, • Have experience using Lean Tools (A3, 5Why, Fishbone diagram, etc.) is preferable, • Have experience in managing the 7 Elements of Waste is preferable, • Familiarity with Engineering Drawings is preferable, • Ability and willingness to stand for a minimum of 10 hours per day, and lift up to 40lbs unassisted as required, • Ability to handle additional PPEs required for the Test Stand activities, • Experience using hand and torque driven tools, • Intermediate PC skills and ability to navigate programs used by the Company for training and/or communication purposes, • Ability to provide effective testing reports to the Test Engineering teams., • Ability to work collaboratively in a fast-paced team environment, • High level of accuracy; keen attention to detail, • A personality style that is inclusive, communicative and respects others, • Recognized by peers as a contributor to achieving the daily Task, • Customer focused, both internal and external, • Ability to communicate effectively Working schedule:, • Day shifts - Monday - Thursday. Willingness to work weekends if necessary. Benefits offered: • Bi-weekly Pay, • Full range of medical benefits, dental, vision, • Health saving account, • Company payed Life Insurance, • Paid Holidays & Vacation, • Matching 401K, • Sickness and Accident Short-Term Disability, • Optional Long-Term Disability, • Opportunity for career advancement Job Type: Full-time This position is eligible to earn a discretionary bonus based on performance metrics and other criteria outlined in our applicable bonus plan. We consider several job-related, non-discriminatory factors when determining the pay rate for a position, including, but not limited to, the position's responsibilities, a candidate's work experience, a candidate's education/training, the position's location, and the key skills needed for the position. Pay is one of the Total Rewards that we provide to compensate and recognize employees for their work. All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law. Fraudulent Recruiting Disclaimer: Dover Corporation and our affiliated operating companies want to alert applicants to internet job posting fraud, where parties posing as Dover employees, recruiters, or other agents, try to engage with online candidates in an attempt to steal personal and/or financial information. We do not endorse or engage in any recruitment practices that involve payment or personal information outside of our official application and hiring process. Please verify the authenticity of an invitation to apply for a job, or for a job offer by contacting us directly through our Dover and affiliated operating company websites at https://careers.dovercorporation.com/. To learn how you can protect yourself, review our Recruitment Fraud Notice on our careers site.

Job Description Electrical ITS Technician CDL Required | Intelligent Transportation Systems (ITS) / Traffic Signalization Location Austin, Texas Department Intelligent Transportation Systems (ITS) Employment Type Full-Time Schedule Day, night, weekend, travel, and paid on-call assignments may be required based on project and operational needs. CDL Required / NCCCO Crane Operator Desired This position requires a valid CDL because the employee may need to drive and operate bucket trucks, digger derricks, aerial lifts, and other company vehicles or equipment for traffic signalization, electrical, and similar ITS field work. NCCCO Crane Operator certification is preferred, as the employee may occasionally be required to operate a digger derrick for lifting operations associated with field construction and maintenance activities. Position Summary SICE is seeking a skilled and safety-focused Electrical ITS Technician to perform installation, maintenance, troubleshooting, repair, testing, and support of Intelligent Transportation Systems (ITS), traffic signal systems, roadway communications infrastructure, and related electrical equipment. This role involves hands-on field work in roadway, construction, and transportation environments and requires safe operation of bucket trucks, lifts, service vehicles, tools, and equipment. The successful candidate must be able to work safely around active traffic, construction operations, electrical systems, elevated work areas, and varying weather conditions while complying with company, OSHA, DOT, client, and project-specific requirements. Essential Duties and Responsibilities • Install, maintain, troubleshoot, repair, and test ITS devices, traffic signal systems, illumination poles and related field equipment., • Perform electrical wiring, conduit installation, cabinet installation, equipment replacement, terminations, and field repairs., • Install, inspect, and maintain traffic signal components, vehicle detection systems, CCTV cameras, dynamic message signs, communication devices, fiber optic infrastructure, network devices, and other ITS field assets., • Operate bucket trucks, aerial lifts, service vehicles, and other company equipment required for traffic signalization and ITS work., • Operate digger derricks, boom trucks for lifting operations (if NCCCO certified), • Read and interpret electrical drawings, schematics, plans, specifications, work orders, and maintenance instructions., • Perform preventive maintenance, corrective maintenance, emergency repairs, and field diagnostics to identify and resolve system or equipment issues., • Support system testing, commissioning, inspection, acceptance, and closeout activities., • Assist with traffic control setup, roadway work zone safety, mobilization, demobilization, site housekeeping, materials handling, and inventory control., • Maintain accurate records, work orders, inspection notes, maintenance reports, equipment logs, and other required documentation., • Coordinate with supervisors, engineers, contractors, subcontractors, clients, and project team members as needed., • Respond to service calls, outages, incidents, and project needs, including after-hours support when assigned., • Follow all company policies, safety expectations, quality requirements, confidentiality obligations, client-site rules, and applicable regulations., • Perform other related duties as assigned based on business, project, or operational needs. Educational / Experience Requirements Preferred Education and Experience, • High School Diploma, GED, or equivalent specialized training required., • Technical training in electrical, ITS, traffic signals, electronics, telecommunications, construction, or a related field preferred., • Minimum of 2 years of experience in electrical, ITS, traffic signal, roadway technology, utility, or construction field work preferred., • Experience working on transportation, roadway, municipal, DOT, tolling, utility, or infrastructure projects preferred.Licenses, Certifications, and Work Authorization, • Valid Class A or Class B CDL required., • NCCCO Crane Operator desired., • Valid driver’s license and acceptable driving record required., • Must be capable of legally and safely operating bucket trucks, aerial lifts, service vehicles, and assigned company equipment., • Must be authorized to work in the United States., • Must satisfy company, client, project, background check, drug/alcohol screening, driving record, badging, and site-access requirements, as applicable., • IMSA Traffic Signal Certification preferred., • Fiber optic certification, MOT/traffic control certification, or related technical certifications preferred. Safety Requirements, • OSHA 10 Certification preferred., • Candidates who do not currently possess OSHA 10 Certification must successfully complete OSHA 10 training upon hire within the timeframe established by the company., • Must comply with OSHA, DOT, company, client, and project-specific safety requirements at all times., • Must properly use required PPE and follow safe work practices around electricity, elevated work areas, moving traffic, heavy equipment, power tools, and active construction zones., • Must participate in toolbox talks, daily safety briefings, job hazard analyses (JHAs), near-miss reporting, and incident reporting as required., • Must promptly report unsafe conditions, injuries, incidents, equipment damage, hazards, compliance concerns, or policy concerns through appropriate company channels. Schedule, On-Call, Travel, and Night Work, • May be required to participate in an on-call rotation to support service calls, emergencies, outages, maintenance needs, or project requirements., • On-call assignments will be compensated in accordance with company policy and applicable law., • Travel may be required to project sites, client locations, branch locations, yards, warehouses, or field work areas., • Night work may be required, including scheduled maintenance windows, traffic signal work, lane closure operations, emergency response, and project-specific activities., • Weekend, holiday, overtime, or shift work may be required based on operational needs. Knowledge, Skills, and Abilities, • Knowledge of electrical systems, traffic signal systems, ITS field devices, communications infrastructure, and troubleshooting practices., • Ability to use electrical testing equipment, hand tools, power tools, ladders, lifts, and field equipment safely and effectively., • Ability to read and interpret electrical drawings, plans, schematics, specifications, and technical instructions., • Strong troubleshooting, problem-solving, documentation, and communication skills., • Ability to work independently and as part of a crew in field, roadway, and construction environments., • Ability to follow instructions, meet deadlines, and maintain professionalism when interacting with team members, clients, contractors, and the public. Working Conditions and Physical Requirements, • Work is performed primarily outdoors and in field environments, including roadways, intersections, construction zones, tolling/ITS sites, yards, warehouses, and equipment areas., • May work near active traffic, construction equipment, lifts, ladders, energized or low-voltage equipment, fiber/communications infrastructure, dust, noise, heat, rain, humidity, and uneven terrain., • Ability to stand, walk, bend, kneel, crouch, climb, reach, and work at heights or in confined spaces as needed., • Ability to lift and carry up to 50 pounds regularly and heavier materials with assistance or proper equipment., • Ability to work from bucket trucks, ladders, aerial lifts, and elevated platforms., • Must maintain tools, vehicles, equipment, materials, and work areas in a clean, organized, and safe condition. Benefits

Job Description Purpose Statement: The Print Operator is responsible for the set- up, operation and maintenance of our print machinery, while adhering to a specified set of blueprints or schematics to create unique stationary, cards, invitations, books, and other such items. Read instructions from order invoice, verify the correct quantities of components and quality check completed items, manage inventory and use hand tools and mechanical equipment to produce structurally sound products that are functional and beautiful. This individual needs to have a high energy, hands-on style; a desire to work at the detail production and technology levels. The ability to keep pace with rapidly growing demand and a fast-paced environment. Duties and Responsibilities: • Copying/printing equipment (Xerox 800 Color Press, DocuColor 560, DocuTech 6180, Xerox 4127, Freeflow/Digipaths, Xerox Makeready application, etc.), • Operate and maintain iGEN press., • Tracks and records all consumables and through put of equipment, documents, and maintenance issues., • Coordinates open tickets for more serious maintenance issues., • Keeps color profiles necessary for consistency through daily calibration., • Sets up and operates digital presses in the most cost-effective and efficient manner while maintaining image quality., • Completes in-process inspections; follows work instructions and control plan in a timely manner., • Knowledge of how to calibrate the iGEN press to maintain optimal color output., • Perform machine maintenance to ensure the proper functioning of digital press equipment., • Minor maintenance functions include cleaning, replenishing consumables, and replacing parts as needed., • Knowledgeable of all variables print stocks., • Ensure that the work area is kept neat, clean, safe, and organized at all times., • Demonstrate proficiency in reading and interpreting work orders., • Ensuring that all products are in compliance with QA standards., • Consistently meet minimum required production, accuracy or quality standards for the work performed., • Other duties as assigned by Manager. Experience & Qualifications Required • Ability to speak and read English., • Must be punctual and reliable., • Ability to perform tasks that are repetitive., • Must be deadline oriented and have the ability to prioritize work., • Must be able to work in an environment with a high level of noise., • Must be able to multitask., • Must be able to focus in a high activity environment., • Must be able to tolerate working in a fast-paced environment., • Must be able to accurately follow specific instructions for multiple detailed assembly processes., • Must be available to work overtime as needed., • Must be able to work flexible hours depending on business demands. Preferred • Experience in manufacturing environment., • Ability to work individually and in a team environment., • Bilingual English - Spanish, • Can perform basic mechanical applications., • Analytical Skills., • Problem solving skills., • Critical thinking. Education • High School Diploma, GED. Relevant experience may be substituted for education. Physical Requirements The physical demands described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with qualified disabilities to perform the essential functions. • While performing the duties of this job, the employee is regularly required to use hands and fingers to handle or feel, reach for, and carry objects with hands and arms., • Must be able to lift items that weigh up to 50 lbs. and are 60" in height on a daily basis., • Communicate verbally with co-workers and management., • The employee is required to stand for prolonged periods of time, walk, stoop, kneel, crouch or crawl., • The employee is occasionally required to sit, climb, or balance., • Specific vision abilities required by this job include the ability to see up close, differentiate between colors, proper depth perception, ability to adjust focus and keen eye for detail. Working Conditions Work performed in a warehouse environment with exposure to moderate noise, moving equipment, and temperature variations. Benefits: • Medical, dental, and vision coverage, • 401(k) retirement plan, • Paid holidays and generous PTO, • Career growth and promotional opportunities, • And much more! We are an equal opportunity employer and are committed to fostering an inclusive and diverse workplace. We do not discriminate based on race, color, religion, national origin, gender, sexual orientation, age, marital status, veteran status, disability, or any other characteristic protected by law.

Job Description 5K Specialty Systems Position: BAS Controls Technician Location: Austin, TX Reports To: General Superintendent, 5K Specialty Systems Employment Type: Full-Time 5K Specialty Systems is a low-voltage systems and building automation company delivering structured cabling, security and access control, audio/visual, and BAS integration solutions for commercial, industrial, and specialty facilities. Part of the 5K Holdings family, 5K Specialty Systems is built on a foundation of technical precision, reliability, and client focus — delivering systems that perform. Position Summary The BAS Controls Technician installs, wires, calibrates, and tests building automation controls hardware in the field, then supports static and dynamic commissioning of the programming once it's in. This is the hands-on role that turns an approved BAS design into a working, calibrated system — and the technician who represents 5K Specialty Systems directly to the customer when servicing installed equipment. Key Responsibilities • Install BAS field devices, controllers, sensors, and actuators per approved drawings and specifications, • Run and terminate low-voltage control wiring in accordance with project standards and code requirements, • Calibrate systems using basic electronic test equipment (multimeters, network terminals, laptop), • Support static (stand-alone) and dynamic (network-interactive) commissioning of software programming, • Set up operator workstations with associated software as needed, • Track and record job progress; keep the Project Foreman informed and complete paperwork on time (time sheets, work orders, on-site documentation, status reports), • Label and document installed devices and wiring for as-built accuracy, • Serve as a direct customer contact when servicing installed equipment on assigned accountsQualifications & Skills Required • 1–3 years of experience in low-voltage or controls installation, electrical work, or a related trade, • Basic understanding of building automation devices and wiring practices, • Ability to read basic control drawings and wiring diagrams, • Comfortable working at heights, in mechanical rooms, and above-ceiling spaces, • Valid driver's license and reliable transportation to job sitesPreferred, • Trade school training or certification in electrical, low-voltage, or HVAC controls, • Experience with BAS platforms such as Tridium/Niagara, Distech, or Delta Controls hardware, • OSHA 10 or OSHA 30 certificationWork Environment & Physical Requirements This is a field-based role requiring regular travel between active construction sites. The BAS Controls Technician must be able to lift up to 50 lbs, work at heights using ladders or lifts, work in confined or above-ceiling spaces, and comply with all jobsite safety requirements including PPE use. Why Join 5K Specialty Systems? At 5K Specialty Systems, you're joining a ground-floor opportunity with the backing of an established, financially strong parent organization. You'll have the resources to do your best work, a team invested in your success, and a culture built on accountability, collaboration, and excellence. If you're ready to build hands-on skills with a company on the rise, we want to hear from you. Benefits Include: • Competitive pay with a performance-based bonus opportunity, • Comprehensive health, dental, vision, and long- and short-term disability insurance, • Paid travel and expenses when applicable, • Opportunities for professional growth and advancement within a rapidly scaling organization5K Specialty Systems is an Equal Opportunity Employer and does not discriminate based on any status protected by applicable law. This job description is not intended to be all-inclusive. Duties, responsibilities, and activities may change at any time with or without notice. Powered by JazzHR c8gB1fksXE

Job Description Southland Holdings is currently accepting resumes for highly motivated construction workers to join our team as a Loader Operator... Duties: • The Operator's primary function is to operate a Finish Blade, Blade, Roller, and/or Loader at the site of work to construct, maintain, or repair highway, heavy civil, or building type structures; equipment operators are also expected to assist in other duties around the jobsite as needed, • Operates a Blade, Roller, Loader, and/or Finish Blade to complete tasks such as grading and move and/or transport materials such as dirt, rocks, and other types of aggregate, • Must have knowledge of operating procedures as it pertains to loading and unloading materials, • May oil, grease, service, and make normal maintenance adjustments on equipment; perform daily safety and maintenance checks; complete paperwork and other documentation as needed, • May perform other related duties as required Requirements: • DOT Experience REQUIRED, • 1-3 YEARS Operating Experience, • Must be able to lift up to 75 lbs. may be required to work in adverse weather conditions, • Requires the ability to comply with all safety policies and procedures; communicate effectively with co-workers and supervisors to ensure projects are completed properly, • This job requires the ability to perform essential job tasks in less than favorable job conditions. These may include, but are not limited to: Performing strenuous work in varying temperatures, humidity, sand, wind, or other extreme inclement weather conditions for extended periods of time. Location: Austin, TX Housing and per diem will be provided for operators only Full-Time Employee Benefits: Competitive pay, Health/Dental/Vision/Life & 401K company match. Paid holidays/vacation. Employee Referral program. Powered by JazzHR 9Sxg7EXCM0

Job DescriptionDescription: Company Overview: Diamond D Industries, LLC is the nation’s leading women-owned heavy construction specialist. Based in South Louisiana, DDI offers clearing, access, site preparation, logistics, and storm response services throughout North America. Heavy Equipment Operator: The Heavy Equipment Operator is responsible for operating and maintaining various types of heavy equipment such as skidsteers, excavators, and loaders. This full-time position has competitive compensation and benefits. Key Responsibilities: • Operate heavy equipment in a safe and efficient manner, • Perform routine maintenance and repairs on equipment, • Follow project plans and specifications, • Ensure compliance with all safety regulations and company policies, • Complete daily logs and reports, • Communicate with team members and supervisors effectively, • Follow all operating procedures and guidelines, • Any additional tasks or projects assigned by their supervisor Requirements: Required Skills and Qualifications: • High school diploma or equivalent, • Minimum of 3 years of experience operating heavy equipment, • Valid driver's license and clean driving record, • Experience with various types of heavy equipment such as bulldozers, excavators, and loaders, • Excellent hand-eye coordination and depth perception, • Strong attention to detail and ability to follow instructions, • Ability to work independently and as a part of a team, • Willingness to work in all weather conditions, • Knowledge of safety regulations and procedures, • Strong work ethic and dedication to completing tasks efficiently, • Ability to lift up to 50 pounds, • Successful candidates must complete a drug screening and background check prior to employment

Job DescriptionStore Manager (Full-Time)Location: Barton Creek, Austin, TX - Barton Creek Square Reports to: Area Manager Role Overview As a Store Manager, you are more than just a retail leader—you are a brand ambassador and business driver. You’ll be responsible for delivering an exceptional customer experience, leading a high-performing team, and ensuring operational excellence in-store. This is a full-time position that plays a key role in shaping the success of our retail presence. What Makes a Great Store Manager? • Customer-Obsessed Prioritizes delivering a best-in-class experience Builds meaningful connections with regulars and new customers, • Team-First Mentality Leads by example, motivates through coaching—not just direction Invests in team development and celebrates team wins, • Commercially Driven Strong understanding of KPIs, stock flow, and profitability Uses data to drive decisions and maximize daily sales opportunities, • Detail-Oriented Operator Maintains high standards across VM, stockroom, and shopfloor execution Confident in managing opening/closing, scheduling, and loss prevention, • Agile & Solutions-Oriented Thrives in fast-paced retail with shifting priorities Takes initiative, stays calm under pressure, and adapts quickly, • Authentic & Positive Communicator Confident, open communicator who embodies the brand's friendly and genuine tone Builds trust and loyalty with customers and team alike, • Passionate About the Brand Wears and loves the product—understands the importance of Fit, Fabric, Foundation Embodies denim lifestyle and represents the brand proudly in and out of the store Key Responsibilities, • Lead and inspire a team to deliver exceptional customer experiences and meet sales targets, • Maximize store profitability through effective scheduling, payroll, and expense management, • Recruit, onboard, and develop store talent aligned with brand values and standards, • Ensure operational excellence, including cleanliness, back-of-house organization, and visual standards, • Drive performance through weekly/monthly business reviews and KPI tracking, • Bring the brand story to life on the sales floor through Fit, Fabric, Foundation, • Manage local marketing activations and build community engagement, • Liaise with HQ teams including HR, Merchandising, Operations, IT, and Marketing, • Maintain full access to all store systems; responsible for opening and closing procedures Required Skills & Qualifications, • Previous retail management experience required, preferably in the fashion or lifestyle retail sector., • Proven track record of meeting or exceeding sales targets and KPIs, • Strong team management, coaching, and talent development skills, • Excellent communication, interpersonal, and organizational abilities, • Solid understanding of retail operations including scheduling, payroll, inventory, and visual merchandising, • Passion for fashion, styling and a genuine interest in denim, • Flexible availability, including evenings, weekends, and holidays, • Proficient computer skills including Microsoft Office (Excel, Word, Outlook)., • Ability to stand for extended periods of time and lift/move objects weighing up to 40 pounds. Requirements added by the job poster • 3+ years of work experience with Retail Management • 2+ years of work experience with Microsoft Office