Machine jobs in Paterson, New JerseyCreate job alerts

Job DescriptionDescription: Summary/Objective: The Cook is responsible for prepping, cooking & assembling a variety of food products and meals, complying with all applicable sanitation, health and personal hygiene standards and following established food production processes and procedures. The Cook ensures the preparation and execution of the Key Success Factor of Premium Broad Product and deliver ticket times of 10 minutes. Positioning: The Cook is positioned in the kitchen performing essential role duties, as well as in the prep/storage area (where applicable). Essential Functions/Responsibilities: Ownership: ? Contributes positively to the team environment, working cohesively with the team to deliver exceptional experiences to locals. ? Understands and consistently complies with standard portion sizes, cooking methods, quality standards and kitchen processes and procedures. ? Prepares, cooks and assembles all food correctly, following standard recipes and special diet orders as required. Spend through Service: ? Work closely with front of house teammates to ensure accurate & efficient food orders to achieve food placement within 10 minutes of ordering. ? Preps ingredients accordingly to prepare for peak trade and deliver 10-minute ticket times. Human Connection: ? Build relationships and work cohesively with the back of house & front of house teams to ensure a seamless experience for locals. ? Communicates effectively with back of house and front of house teammates in order to understand and increase local satisfaction. Premium Broad Product: ? Uses standard Bluestone Lane recipes for preparation and portioning of all products. ? Stores food properly and safely, marking the date and item. ? Plans food production to coordinate with meal serving hours so that excellence, quality, temperature and appearance of food are preserved. ? Follows all procedures and meets food hygiene regulations. Cook Cafes 11.2019 Page 1 of 2 happiness ambassador – fair go – ride the wave - mateship ? Receives and unpacks all kitchen & food deliveries. Beautiful Spaces: ? Maintains a clean and hygienic workstation area including but not limited to; tables, shelves, walls, grills, broilers, fryers, ovens, cooktops and refrigeration equipment. ? Closes the kitchen properly and follows closing procedure for kitchen stations. ? Reports equipment and food quality problems or product shortages to General Manager in a timely manner ? Always maintains grooming & uniform guidelines. Measures of Success: ? Good communication & working environment with Teammates – working together to service local efficiently and effectively. ? Consistently deliver Key Success Factor Premium Broad Product. ? Achieve operational goals of 10-minute ticket times. ? DOH and food safety compliance. Skills, Knowledge & Experience: ? Minimum of one yeas’ prep/line cook experience, preferably in a high-volume cafe environment. ? DOH accreditation or Safe Serve Certified. ? Attention to detail. ? A team player and have proven experience working on a team to achieve great performance. ? Can work in a high stress, fast paced work environment. ? Can stand for extended periods and lift up to 50lbs. Work Environment: This position operates in a kitchen environment with equipment such as an oven, stove, dishwasher, slicer, coffee machine, steamer, mixer and chef’s knives. The employee is frequently exposed to heat, steam, fire and noise. The position occasionally requires the team member to sit, stand, reach, lift, bend, kneel, stoop, climb, push and pull items weighing 50 pounds or less. The position requires manual dexterity; auditory and visual skills; and the ability to follow written and oral instructions and procedures. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Requirements:

Job DescriptionDescription: Position Summary: Responsible for the set up and operation of tubular stranding machines to manufacture wire rope (mechanical cable) and to ensure wire rope and strand is produced within specification. Essential Responsibilities: · Perform any necessary adjustments at set ups and to check accuracy during production. · Ensure the quality production of their assigned jobs at expected production level. · Operate and monitor multiple machines as assigned. · Perform routine maintenance such as cleaning, oiling and lubricating machines. · Check machine operation and report faults to the supervisor or lead person. · Demonstrate continuous effort to improve operations, decrease turnaround times, streamline work process, and work cooperatively and jointly to provide quality seamless customer service. Requirements: Education and Experience: ·High school diploma or GED preferred ·Some mechanical experience preferred. Job Knowledge, Skills and Abilities: · Basic knowledge of mechanical processes and measurement. · Good communication skills. · Ability to work with and handle very small wire · Ability to understand and follow oral or written instructions; Ability to accurately prepare documents, production sheets and other reports and related paperwork as required by our procedures. Physical Demands: · The position is in the factory and involves walking, standing for long periods of time throughout the day in a noisy environment. · Fast-paced environment, usually work standard 40-hour weeks, but overtime maybe necessary as workload dictates. Hours: · Monday through Friday 6:00 a.m. to 2:30 p.m. · Overtime shifts available on an “as needed" basis. The starting rate is $17 per hour.

Job DescriptionDescription: Operates an upright stranding machine or Bartell machine to strand wire onto a spool. Supervises the general quality of the wire/cable. Maintains and cleans the machines and area as required. Duties and Responsibilities: • Measures wire/cable for size using micrometers., • Clears area of other wire materials. Completes job cards and wire log sheets., • Sets up the machines by threading wire through machine guides. Secures materials according to job being run., • Respools wire/cable using respooling machines., • Any other duties as assigned by supervisor.Requirements:, • Demonstrates ability to self-motivate and to problem solve in a fast-paced setting., • Excellent organizational skills and attention to detail, • Must have good documentation practice., • A proven understanding of part workmanship., • Ability to read a micrometer and basic computer skills. Education and Experience: • High school diploma or equivalent. Working conditions: • While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasional exposed to wet and/or humid conditions, ambient air, fumes or airborne particles., • The noise level in the work environment is usually high, safety equipment is mandatory. Physical requirements: • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job., • Candidate must be able to perform the physical responsibilities of the job utilizing arms, hands, and fingers to perform complex functions of manufacturing parts and performing other duties of the job; e.g., standing, sitting, walking throughout the facility and stairs, bending, squatting, and kneeling, etc., • ·Ability to lift items weighing 10-15 lbs. Pay: $17.00-$17.00/hour Benefits: Eligible after 1st day: • Paid holidays, • Employee Assistance Program Eligible after 90-day probation period: • Medical, Dental, Vision, Basic Life/AD&D Insurance, Voluntary Term Life/AD&D Insurance, • Health Savings Account (HSA), Flexible Spending Account (FSA), Dependent Care Account, Commuter Transportation Management Account, • Vacation time, • Sick time Eligible after 1 year of service: • 401(k) with Employer Match, • Potential for discretionary bonus The final pay offered to a successful candidate wil l be dependent on several factors that may include but are not limited to the type and years of experience within the job, the type of years and experience within the industry, education, etc. We’re proud to be an equal opportunity employer. This means we actively pursue ways to celebrate our differences and don’t discriminate based on an individual’s race (including traits historically associated with race, such as hair texture, hair type, and protective hairstyles including braids, locks, and twists), creed, national origin, nationality, religion, ancestry, age (40 or over), sex (including pregnancy), familial status, marital status, civil union or domestic partnership status, affectional or sexual orientation, gender identity or expression, mental or physical disability (including perceived disability, AIDS, and HIV status), atypical hereditary cellular or blood trait, genetic information, because of liability for service in military, status as a smoker or non-smoker, status as a registered medical marijuana user, or any unlawful criterion existing under applicable federal, state, or local laws. If you need assistance or an accommodation due to a disability, contact us at HR@Bairdindustries.com.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Health insurance Rubber & Silicone Products has been a manufacturer of various rubber and silicone products for over 70 years. We are looking for a dependable individual who is willing to learn various manufacturing duties on our manufacturing floor, such as sand blasting, painting of manufactured parts, and operation of various manufacturing machinery. We are willing to train the right person. This is a full-time position, 40 hours per week, Monday - Friday from 7:50am to 4:20 pm. JOB RESPONSIBILITIES: • Will be trained in the operation of various manufacturing and Urethane Machines, • Also will be trained on cleaning/trimming molded parts and packing it according to company standards, • Inspect product constantly to maintain highest quality parts, • Maintain and handle tools and equipment used for production and quality procedures, • Record production output and machine efficiency, • Assist in operation of other machines and tasks which the business demands in the other production areas, • Must follow all the safety procedures, company rules and regulations, use of dust masks, gloves, eye protection and other safety equipmentJOB QUALIFICATIONS:, • Ability to handle physical workload of lifting up to 50 lbs, • Previous experience in a manufacturing environment is a plus, • Previous experience in Urethane is a plus, • Will provide on the job training for the right individual

Job DescriptionJob Title: Fabrication Machine Operator (Pharmaceutical) Location: West Caldwell, New Jersey Type: Contract Compensation: $20 - $24/Hour (based on shift and experience) Contractor Work Model: Onsite Hours: Mon-Fri 1st shift: 6:15 AM - 2:30 PM 2nd shift: 2:15 PM -10:30PM 3rd Shift: 10:15 PM - 6:30 AM Duties and Responsibilities: • Operate vial filling machines, fabrication machines, and/or secondary packaging equipment including labels and semi-automatic packaging equipment.., • Meet established scrap rate goals., • Clean and set up manufacturing/packaging equipment., • Assure appropriate calibration stickers are current., • Record all necessary documentation in appropriate logbooks and batch records., • Communicate with IPC Operator and Supervisor on all issues concerning quality, components, and machine performance., • Palletize completed work and transport to warehouse as necessary., • Complete downtime log accurately and contemporaneously., • Assure that all reconciled labeling; e.g. pouch stock, inserts, shipper labels and waste is properly accounted for., • Communicate mechanical issues and other Production information with incoming and outgoing shifts., • Knowledgeable of all appropriate SOP’s and their practical application. Qualifications: • Must be able to successfully pass a respirator fit test to wear periodically, • Prior Pharma packaging experience required, • Ability to be gowned for manufacturing – wear safety glasses, hearing protection, full face/half mask respirator, latex gloves, Tyvek suit, • Must possess good manual dexterity and visual acuity, basic reading, writing, verbal and math skills, • Must be able to lift and move 25-49lbs throughout shift, • High School Diploma or equivalent System One, and its subsidiaries including Joulé, ALTA IT Services, and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M1 Ref: #562-Joule Staffing - Edison

Job Description Fabrication Operator Fairfield, NJ Full Time Entry Level Fabrication Operator in Fairfield, NJ 1st Shift Pay $17.50 per hour – $19.75 Based on experience Fulltime, Benefits, and Weekly Pay iBoost Talent is hiring for a Full-Time Fabrication Operator with Turret Punch Press experience in Fairfield, NJ. Impact is proud to offer an industry leading benefits and wellness package, with eligibility for some programs beginning Day 1! Our positions are full-time, year-round employment with paid training. We offer: • 5 Days of PTO, • 6 Paid Holidays, • Paid Sick Leave, • Up to 50% of health insurance premiums paid, • Access to a retirement plan, financial fitness, and employee savings programPay $17.50 – $19.75 per hour based on experience 1st Shift Hours - 6:00am – 2:30pm Mon – Fri Job Summary: This position is responsible for safely setting up, operating, and shutting down various CNC fabricating, forming & VMC Machines. This position will have the responsibility to ensure the machine parts and production units are meeting or exceeding the required quality standards. Work assignments will be scheduled based on training proficiency. Duties and Responsibilities: • Set up and inspect the first piece against engineering drawings, ensuring accurate information transfer for efficient production runs., • Conduct routine quality control checks during setup and production, addressing any issues promptly., • Collaborate with the Supervisor and Team Leader to prioritize tasks according to the job board., • Organize, sharpen, and maintain tools and dies as needed., • Train operators based on Supervisor's instructions and plan for upcoming jobs by preparing materials and paperwork in advance., • Perform routine setup, troubleshooting, and machine maintenance, including cleaning and checking tools., • Communicate with management regarding any issues and the priority of upcoming setups., • Conduct basic quality checks and make necessary adjustments to ensure parts meet specifications., • Load and unload machines, verifying correct part processing., • Perform lower-level tasks such as filing and sanding as required., • Adhere to safety rules and maintain good housekeeping practices., • Report hazardous situations and participate in safety programs., • Lead or participate in Continuous Improvement Teams and maintain a clean workstation according to 5S procedures., • Support overall departmental and corporate goals by performing additional duties as assigned.Job Requirements:, • Basic math, communication, and troubleshooting skills., • Proficiency in using measurement tools (e.g., tape measure, calipers) and interpreting engineering drawings and BOMs., • Ability to follow directions and work independently with minimal supervision., • Flexibility to adapt to changing priorities and tasks., • Mechanical aptitude and problem-solving skills., • Experience in setting up and operating CNC equipment., • Team-oriented with the capability to train others in CNC techniques., • Reliability in attendance and punctuality., • Understanding of basic lean principles (5S, Kanban)., • Proficiency in English is preferred.Education and Experience:, • High school diploma, GED, or technical certification preferred., • Minimum of 4 years of experience operating specialized equipment or 3 years of CNC setup experience.Working Conditions/Physical Demands:, • Stand for 8 hours a day, performing coordinated hand movements and frequently lifting up to 50 lbs., with occasional lifting up to 100 lbs., • Tasks may involve repetitive motions, overhead reaching, bending, and exposure to sharp edges, dust, and high noise levels., • Work in a non-temperature-controlled environment; steel-toed shoes are required.

Job DescriptionEdge Band Operator – 2nd ShiftPay: Starting at $25.00/hour Location: Carlstadt, NJ Schedule: Monday–Friday, 3:15 PM–11:30 PM Employment Type: Full-Time Department: Production Reports To: Production SupervisorJob SummaryWe are looking for an experienced Edge Band Operator to join our Production team in Carlstadt, NJ.The Edge Band Operator will be responsible for setting up and operating the edge banding machine to apply edge banding to wood doors while ensuring finished parts meet company quality and dimensional standards.The ideal candidate will have 3+ years of experience operating an edge banding machine and a strong background in door or cabinet manufacturing.Key Responsibilities • Set up and operate the edge banding machine for door production., • Load materials and select the correct edge band tape/material for each job., • Adjust machine settings, including speed, glue temperature, and trimming, for different materials and thicknesses., • Inspect finished edges for glue lines, chipping, gaps, proper adhesion, and accurate trimming., • Perform routine machine cleaning, minor maintenance, and troubleshooting., • Stage and safely move completed parts to the next production station., • Read and follow basic cut lists, production tickets, and work orders., • Report material shortages, machine issues, and quality concerns to the Production Supervisor., • Maintain a clean, organized, and safe work area., • Follow all company safety and quality standards.Requirements, • Minimum 3 years of experience operating an edge banding machine., • Door or cabinet manufacturing experience required., • Ability to read and understand basic cut lists, tickets, and work orders., • Strong attention to detail and commitment to quality., • Ability to work efficiently in a fast-paced production environment., • Reliable attendance and punctuality., • Ability to work effectively as part of a team.Physical Requirements, • Ability to stand for extended periods., • Ability to lift and move materials up to 50 lbs., • Ability to bend, reach, and use hands and arms repetitively., • Ability to safely perform the physical requirements of a manufacturing environment.

Job DescriptionConverting Line Operator — Laminating, Slitting & Sheeting Location: Fairfield, NJ 07004 Schedule: Full-time with overtime opportunities; All Shifts Available A Day in the Life You clock in at our Fairfield manufacturing facility and review the day’s work orders. After a quick safety check, you and your assigned helper stage materials and prepare a laminator, sheeter, or slitter for the first run. Throughout the shift, you monitor controls, watch web paths, verify specifications, and make small, approved adjustments to keep production running smoothly. You continually scan for surface defects, measure output against job requirements, and document production counts, material usage, and any downtime. If something sounds off or a roll isn’t tracking correctly, you stop the machine and alert a supervisor or maintenance right away. Between jobs, you handle basic cleaning and operator-level care so the next run starts efficiently. You keep your area organized, communicate clearly with helpers and teammates, and support the team by taking overtime when it’s available. What You’ll Handle • Start up, run, monitor, and shut down laminators, sheeters, slitters, and related equipment with a focus on safety., • Work from work orders and standard procedures to meet production requirements., • Track equipment performance during runs and make routine adjustments within guidelines., • Partner closely with your assigned helper to move materials efficiently—large lines are not run alone., • Inspect in-process materials and finished goods for visible defects and confirm they meet job specs., • Record production data, including quantities, materials, and downtime., • Stay alert for unusual sounds, motion, or conditions; stop machines and report issues promptly., • Perform routine cleaning and basic operator maintenance., • Maintain housekeeping and follow all machine guarding, PPE expectations, and safety rules., • Collaborate with helpers, supervisors, quality, maintenance, and fellow operators., • Support production needs by working overtime when available.Required Qualifications, • Comfort operating or working around large production/industrial equipment., • Ability to follow written and verbal instructions., • Strong focus on safety, quality, and detail., • Reliable attendance and on-time performance., • Capacity to stay attentive while monitoring running equipment., • Team-oriented communication skills., • Willingness to learn laminating, sheeting, and slitting operations., • Openness to overtime when available or required., • High school diploma or equivalent.Preferred Qualifications, • Experience in machine operation, production, manufacturing, or heavy equipment., • Exposure to laminators, sheeters, slitters, printing, converting, or roll-fed machinery., • Mechanical aptitude and an eye for abnormal machine behavior., • Comfort with work orders, quality checks, and manufacturing documentation.Training & Onboarding We provide hands-on training covering: • Laminators, sheeters, slitters, and related production systems, • Machine controls and standard operating procedures, • Safe operating practices, • Product and material specifications, • Basic quality inspection techniques, • Production documentation and recordkeeping, • Communication and teamwork with assigned helpers No prior experience on Unifoil’s specific equipment is required—if you’re reliable, mechanically aware, and ready to learn, you’ll fit right in. Physical & Work Environment • Active manufacturing setting around large, moving equipment., • Standing and walking for extended periods., • Regular bending, reaching, and material-handling tasks., • Use of required personal protective equipment., • Working around typical manufacturing noise and motion., • Overtime based on production needs and availability.About Unifoil Unifoil is a global leader in laminating, coating, and metallizing technologies. For over 50 years, we’ve delivered innovative specialty substrates, products, and solutions to brand owners, packaging designers, printers, and other customers worldwide. Our team blends manufacturing expertise, technical innovation, and a commitment to environmentally conscious solutions to help customers create distinctive packaging and specialty applications.

Job DescriptionBenefits: • Dental insurance, • Flexible schedule, • Health insurance, • Paid time off, • Profit sharing, • Vision insurance Job description: Responsibilities: • 7+ years of sewing experience in bridal gowns or evening alterations, • Specialty in handling lace and silks and fine fabrics, • Able to operate industrial sewing machines and pressing tables., • knowledge of all aspects of the fitting: Machine sewing, hand finishing, bustling, and pressing,, • Expert knowledge of garment construction., • Able to do fittings and have strong communication skills., • Knowledge of garment construction in order to communicate correctly with the client, • Ability to work in a fast paced environment and a positive attitude, • **If selected for the interview, you will be required to do a sewing test.Job Type: Full-time Benefits: • Dental insurance, • Flexible schedule, • Health insurance, • Paid time off, • Vision insuranceSchedule:, • 8 hour shiftAbility to commute/relocate:, • Rutherford, NJ 07070: Reliably commute or planning to relocate before starting work (Required)Experience:, • Sewing: 8 years (Required)Work Location: In person

Job DescriptionFrimpeks Inc. needs a mixing operator for UV coating materials production. The Operator helper must have basic reading and math skills. Mechanical and problem solving abilities are necessary. Must be proficient with reading a scale. Must be able to interpret the product formulations. Basic computer skills are a plus. Strong work ethics and being a team player are important. Primary Responsibilities: • The Mixing Machine Operator helper supports machine operator to dump or pour specified amounts of materials into machinery and equipment., • The Mixing Machine Operator helper observes production and clean the working area for safety., • The Mixing Machine Operator helper job function is to also stop mixing or blending machines when specified product qualities are obtained, and open valves and start pumps to transfer mixtures., • Getting the material to be ready packed. Forklift driving experience is required. Job Types: Contract, Full-time

Job Description Job Title: Slitting Operator Location: West Caldwell, NJ Type: Contract Compensation: $25.00 - $27.00 per hour Work Model: Onsite Hours: 6:15 a.m. - 2:30 p.m. (with potential for OT) Responsibilities • Operate slitting and rewinding equipment to process raw materials, medical tapes, and coated laminates and films. • Complete in-process checks and batch record documentation accurately according to manufacturing orders. • Set up equipment correctly, including wind direction and tension settings, in accordance with SOPs. • Use slitting tools and machine components safely and effectively, including scissors, crush, and razor knives. • Label, package, and prepare finished materials for transfer or shipment as required. • Clean equipment and maintain the work area in compliance with safety, environmental, and housekeeping standards. • Complete all aspects of the slitting operation, including in-process control activities and batch record documentation accordance with manufacturing orders. • Follow manufacturing procedures and support safe, efficient production operations as needed. Requirements • High school diploma or equivalent. • 4-5 years of production or manufacturing experience. • Ability to read, write, and communicate clearly in a manufacturing environment. • Basic math skills and ability to complete production documentation accurately. • Comfort using basic tools, equipment, and manufacturing machinery. • Able to wear safety glasses, hearing protection, full face/half mask respirator, latex gloves, tyvek suit, and other safety equipment as needed. System One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M1 Ref: #562-Joule Staffing - Edison

Job Description At 4over, we are committed to building a diverse and inclusive workplace welcoming to people of all backgrounds. Providing our employees with job training and opportunities for growth, development, and advancement. We take pride in fostering a safe environment for all employees in our climate-controlled plants. Summary: The Assistant Press Operator assists the Press Operator and Lead Press operator in the basic setup and maintenance of the presses verifying proper paper sheet sizes and types. They are also responsible for ensuring that all presses are supplied and fed with required quantities of paper and other consumables. Schedule: 2nd shift, Monday - Friday, eight or more hours per day, five days per week based on business needs. Primary schedule will be 2:00 PM – 10:00 PM, or similar. Training may occur at other times. Salary Range: $19.00 To 25.00 Hourly Compensation commensurate with experience. At time, we are not engaging with agencies or third-party recruiters. Thank you for understanding. DUTIES AND RESPONSIBILITIES • Assist press operators in setting up, adjusting, and maintaining printing presses to ensure optimal performance., • Load and unload paper, ink, and other materials onto the press, ensuring that stock is properly aligned and ready for printing., • Monitor print runs for quality, ensuring color consistency, proper alignment, and overall print quality. Report any issues to the press operator immediately., • Assist in mixing ink and maintaining proper ink levels for consistent color reproduction throughout production runs. Ensure that inventory levels for materials are regularly checked and maintained., • Identify minor technical issues with the press and assist in troubleshooting and resolving them under the guidance of the press operator., • Clean presses, rollers, and other equipment regularly to ensure optimal printing conditions and prevent malfunctions., • Provide general support to the production team, including preparing materials for upcoming jobs, organizing job orders, and ensuring that all tools and equipment are properly prepared and cleaned., • Actively remove waste items for recycling, • Complete and process all required paperwork, records, documents, etc., • Regularly perform general housekeeping duties in your work area(s), • Adhere to all safety policies and protocols and maintain a safe working environment, • Assist in cultivating an interdependent safety culture by reporting workplace hazards, related injuries, illnesses and or/near misses to management immediately, • Attend all department/company meetings, • Wear all assigned Personal Protective Equipment (PPE) when required, • Other duties as assigned For an extensive list of responsibilities, duties and physical demands/work environment please refer to the attached Job Description. EXPERIENCE AND QUALIFICATIONS EDUCATION, LICENSES, CERTIFICATIONS, EXPERIENCES: • 1 year experience of working within a fast-paced production or manufacturing environment, • High School Diploma or GED equivalency, preferred CRITICAL KNOWLEDGE, SKILLS, AND ABILITIES REQUIREMENTS: • Problem-Solving and Adaptability: Strong problem-solving skills when faced with unexpected challenges, such as machine malfunctions, material shortages, or errors in print quality. Ability to adapt to new printing technologies or changes in production schedules, ensuring smooth operations despite changes., • Time Management & Efficiency: Ability to manage multiple print jobs simultaneously, ensuring deadlines are met without sacrificing quality. Organizing workflows, preparing materials in advance, and optimizing print runs for efficiency and cost-effectiveness., • Attention to Detail: Precision in monitoring print jobs to ensure all details, such as color accuracy, image sharpness, and print placement, meet the required standards. Detecting small defects or inconsistencies during production and taking corrective action immediately.

Job DescriptionPackaging Technician Pay: $20.00 - $24.00/hour Job Overview We are seeking a Packaging Technician with pharmaceutical packaging experience to support manufacturing and packaging operations. In this hands-on role, you will operate packaging and filling equipment, complete production documentation, and help maintain quality standards throughout the packaging process. This opportunity is ideal for candidates who enjoy working in a fast-paced manufacturing environment and take pride in accuracy, quality, and teamwork. Responsibilities • Operate vial filling machines, fabrication equipment, and secondary packaging machinery, • Clean, set up, and prepare manufacturing and packaging equipment for production, • Verify calibration stickers are current and equipment is ready for operation, • Complete batch records, logbooks, and production documentation accurately, • Palletize finished products and transport materials as needed, • Track and document equipment downtime accurately, • Communicate quality, component, and machine performance issues to production teams, • Assist with shift-to-shift communication regarding production status and equipment performanceQualifications, • High school diploma or equivalent, • Minimum 3 years of pharmaceutical packaging experience required, • Ability to stand for the majority of the workday, • Ability to lift and move up to 49 pounds, • Ability to work in a manufacturing gowning environment, • Basic reading, writing, verbal communication, and math skills, • Knowledge of standard operating procedures (SOPs) and manufacturing practices Job Type & Location This is a Contract to Hire position based out of Caldwell, NJ. Pay and Benefits The pay range for this position is $20.00 - $24.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Caldwell,NJ. Application Deadline This position is anticipated to close on Sep 29, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. \nCompany Description We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow. We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Job Title: Registered Dental Assistant Department: Operations Reports to: Dental Practice Manager FLSA Status: Non-Exempt Company Overview ProSmile is the fastest growing dental organization on the East Coast and Midwest. Our premier DSO is led by world class dentists who understand what highly skilled dentists and dental professionals need to grow a practice while focusing on delivering the best-in-class clinical care to their patients. We offer up-to-date equipment and technology, experienced and friendly staff, and dentists who truly care about their patients, as well as competitive pay and, where applicable, a benefits package that includes medical, dental, vision, 401(k), training, and career growth opportunities. Position Summary As a Registered Dental Assistant, you will help support the clinical needs of our patients and doctors. The duties of a Dental Assistant are very important for the functionality of our dental offices. These duties can include patient care, recordkeeping, and appointment scheduling. As a Registered Dental Assistant, you will work under the supervision of dentists and work closely with dental hygienists in their day-to-day activities. Duties and Responsibilities The duties include, but are not limited to: • Clearly demonstrate knowledge of dental instruments and assist the dentist in rendering patient care chairside., • Maintaining inventory control in the operatories where treatment is rendered by the Provider, • Adhering to OSHA, HIPAA, and CDC guidelines, • Deliver world class patient interactions related to scheduling, follow up treatment, post-surgical information and record keeping, • Be able to perform basic lab procedures such as taking impressions, pour models, and preparing cases for external labs., • Remove excess cement from crowns or other restorations and orthodontic appliances;, • Fabricate and cement temporary crowns and bridges after preparation of tooth (teeth) by a dentist., • Placing and removing rubber dam and clamp., • This does not include intra-oral occlusal adjustment;, • Trial size (pre-select) orthodontic bands, wires, stainless steel crowns and temporary crowns intra-orally or on diagnostic models;, • Place and remove arch wires and ligature wires, • Remaining items that are within the scope of Registered Dental assistant., • Maintaining public area appearance, • Performs miscellaneous job-related duties as assignedQualifications, • High School diploma or GED required, • Easily able to learn new technologies and systems required and demonstrates a desire to learn, • Applicable licensing required for the state in which you will work:, • For NJ - Dental Radiologic Technologist (DRT) license or willing to pursue licensure immediately required., • Certified Dental Assistant certificate preferred, • Registered Dental Assistant License preferred, • 1+ years work experience as a Dental Assistant preferred, • Ability to work in a fast-paced environment, • Requires some flexibility in scheduling, such as the ability to work evenings and weekends as needed, • X-ray License required, • Current NJ Registered Dental Assistant license, • Active CPR Certification is required.Knowledge and Skills/Expected Competencies, • Knowledge of dental instruments and patient care., • Ability to clearly communicate medical information to professional practitioners and/or the general public., • Excellent organization, prioritization, follow up, analytical and time management skills with ability to handle multiple priorities and deadlines. Benefits Summary At ProSmile, we are committed to supporting the health and well-being of our employees and their families. We offer the following benefits for Full Time Benefits Eligible Positions (35+ hours per week) and Part Time Benefits Eligible Positions (30-35 hours per week): • Medical Insurance: Choice of five comprehensive Aetna medical plans, including options with low copays, deductible-sharing, and national provider networks., • Dental Insurance: MetLife plans offering preventative, basic, major, and orthodontic coverage options., • Vision Insurance: Davis and UHC vision plans with annual exams, eyewear allowances, and contact lens benefits., • Flexible Spending & Health Savings Accounts: Pre-tax savings accounts for medical, dependent care, and healthcare expenses., • Life & Disability Insurance: Employer-paid basic life and AD&D insurance, with voluntary life, short-term, and long-term disability plans., • Additional Perks:, • Employee Assistance Program (EAP), • Identity Theft & Fraud Protection, • Legal Support Services, • Discount Programs (including pet insurance, travel, theme parks, electronics, etc.), • Wellness Programs, • Financial Wellness and Planning Tools, • Eligible Dental Assistant team members may also have access to company-supported reimbursement for certain licenses and certifications, subject to role eligibility and company guidelines. Physical/Mental Demands and Work Environment The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, walk and use hands and arms to operate general office equipment (PC, telephone, file cabinets, copier, fax machine and printer). The employee may occasionally lift and/or move between 10 and 25 pounds. Specific vision abilities required by this job include close vision and ability to adjust focus. The employee may need to travel to healthcare practices. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is usually low to moderate. The Company reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between the Company and the employee. Equal Employment Our culture encourages individual development, embraces an inclusive environment, rewards innovative excellence, and leads in provider and patient satisfaction. Prosmile values diversity, inclusion, and equity as matters of fairness and effectiveness. We are committed to hiring and retaining a staff that reflects the diversity of the communities we serve, fostering an inclusive working environment where staff of all backgrounds feel welcomed and engaged. ProSmile is an Equal Opportunity Employer and encourages applications from individuals underrepresented in the medical sector, including people of color, and persons with non-traditional work and educational experience. All who believe they meet the stated qualifications are invited to apply. Company Safety We believe that the best care for our patients starts with the best care for our employees. ProSmile is committed to proactively creating and maintaining an environment that is safe for our team and patients. Employees are required to wear Personal Protective Equipment (PPE) including face masks, gloves, gowns, and more as needed and in accordance with CDC standards. Powered by JazzHR 2F2rtkqGr4

Job Description Job Title: Dental Assistant w/ X-ray Department/Location: Operations Reports to: Dental Practice Manager FLSA Status: Non-Exempt Company Overview ProSmile is the fastest growing dental organization on the East Coast and Midwest. Our premier DSO is led by world class dentists who understand what highly skilled dentists and dental professionals need to grow a practice while focusing on delivering the best-in-class clinical care to their patients. We offer up-to-date equipment and technology, experienced and friendly staff, and dentists who truly care about their patients, as well as competitive pay and, where applicable, a benefits package that includes medical, dental, vision, 401(k), training, and career growth opportunities. Position Summary As a Dental Assistant, you will help support the clinical needs of our patients and doctors. The duties of a dental Assistant are very important for the functionality of our dental offices. These duties can include patient care, recordkeeping, and appointment scheduling. As a Dental Assistant, you will work under the supervision of dentists and work closely with dental hygienists in their day-to-day activities. Duties and Responsibilities The duties include, but are not limited to: • Clearly demonstrate knowledge of dental instruments and assist the dentist in rendering patient care chairside., • Maintain inventory control in the operatories where treatment is rendered by the Provider., • Adhering to OSHA, HIPAA, and CDC guidelines., • Deliver world class patient interactions related to scheduling, follow up treatment, post-surgical information and record keeping., • Be able to perform basic lab procedures such as take impressions, pour models, and prepare cases for external labs., • Performs miscellaneous job-related duties as assigned. Qualifications • High School diploma or GED required., • Easily able to learn technologies and systems required and demonstrates a desire to learn, • Applicable licensing required for the state in which you will work:, • For NJ- Dental Radiologic Technologist (DRT) license or willing to pursue licensure immediately required., • For MD- Dental Radiologic Technologist (DRT) license or willing to pursue licensure immediately required., • For PA- Radiation Health and Safety certificate or willing to pursue licensure immediately required., • Certified Dental Assistant preferred., • 1+ years work experience as a Dental Assistant preferred., • Ability to work in a fast-paced environment., • Requires some flexibility in scheduling, such as the ability to work evenings and weekends as needed., • X-ray License required., • Active CPR Certification is required. Knowledge and Skills/Expected Competencies • Knowledge of dental instruments and patient care., • Ability to clearly communicate medical information to professional practitioners and/or the general public., • Excellent organization, prioritization, follow up, analytical and time management skills with ability to handle multiple priorities and deadlines. Benefits Summary At ProSmile, we are committed to supporting the health and well-being of our employees and their families. We offer the following benefits for Full Time Benefits Eligible Positions (35+ hours per week) and Part Time Benefits Eligible Positions (30-35 hours per week): • Medical Insurance: Choice of five comprehensive Aetna medical plans, including options with low copays, deductible-sharing, and national provider networks., • Dental Insurance: MetLife plans offering preventative, basic, major, and orthodontic coverage options., • Vision Insurance: Davis and UHC vision plans with annual exams, eyewear allowances, and contact lens benefits., • Flexible Spending & Health Savings Accounts: Pre-tax savings accounts for medical, dependent care, and healthcare expenses., • Life & Disability Insurance: Employer-paid basic life and AD&D insurance, with voluntary life, short-term, and long-term disability plans., • Additional Perks:, • Employee Assistance Program (EAP), • Identity Theft & Fraud Protection, • Legal Support Services, • Discount Programs (including pet insurance, travel, theme parks, electronics, etc.), • Wellness Programs, • Financial Wellness and Planning Tools Physical/Mental Demands and Work Environment The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, walk and use hands and arms to operate general office equipment (PC, telephone, file cabinets, copier, fax machine and printer). The employee may occasionally lift and/or move between 10 and 25 pounds. Specific vision abilities required by this job include close vision and ability to adjust focus. The employee may need to travel to healthcare practices. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is usually low to moderate. The Company reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between the Company and the employee. Equal Employment Our culture encourages individual development, embraces an inclusive environment, rewards innovative excellence, and leads in provider and patient satisfaction. Prosmile values diversity, inclusion, and equity as matters of fairness and effectiveness. We are committed to hiring and retaining a staff that reflects the diversity of the communities we serve, fostering an inclusive working environment where staff of all backgrounds feel welcomed and engaged. ProSmile is an Equal Opportunity Employer and encourages applications from individuals underrepresented in the medical sector, including people of color, and persons with non-traditional work and educational experience. All who believe they meet the stated qualifications are invited to apply. Company Safety We believe that the best care for our patients starts with the best care for our employees. ProSmile is committed to proactively creating and maintaining an environment that is safe for our team and patients. Employees are required to wear Personal Protective Equipment (PPE) including face masks, gloves, gowns, and more as needed and in accordance with CDC standards. Powered by JazzHR eG26m8Xb6w

Job Description Unit Pack is a family-owned and operated company with over 60 years of experience in packaging liquids, creams, gels, serums, oils, and pastes in single-use flexible packages. Our packaging solutions include customized designs, classic sachets, and affordable and high-quality pouches showcasing your brand. At our Certified Organic and FDA-registered facility, we maintain rapid changeover ability and consistent on-time delivery, ensuring that customer needs are always met. Our long-standing partnerships in cosmetics, pharmaceuticals, and industrial industries have made us a trusted name in the business for three generations. Job Summary: As a Production Line Operator, you will be responsible for operating and maintaining the machines to ensure efficient production of high-quality goods. Your primary focus will be on inspecting packages, monitoring machine performance, and maintaining a clean and organized workstation. Attention to detail, physical strength, and technical skills are essential for this role. Requirements: ● The job requires the ability to lift up to 30 pounds without assistance. ● You must stand for prolonged periods of time. ● Climbing tall equipment to replace parts in a safe manner. ● You will be working in a loud production floor environment, and proper hearing protection is mandatory. ● You must have a strong eye for detail to continuously inspect and focus on small details of produced goods. ● Inspect 100% of packages during production, including checks on print quality, welds, and fill volume. ● Maintain the correct position at all times while operating the machine. ● Keep the workstation clean and organized, properly arranging tool trays, scale tables, and roll tables. ● Keep the work station stocked with necessary supplies: cleaning supplies, wipes, gloves, etc. ● Assemble boxes and fill them with the correct number of packages while adhering to designated weight requirements. ● Replenish raw materials, while also disposing of waste properly ● Replace wear parts to maintain a high level of quality in production ● Check boxes for leaks and perform leak tests. ● Clean the production line at required times following work instructions to prevent downtime, interruptions, and defective packages ● Identify and replace defective parts on the machine. ● Accurately complete all quality control paperwork, following instructions and performing necessary checks. Report issues with paperwork to the quality control team promptly. ● Record all machine stoppages using the Down Time Log, communicating with mechanics to accurately document stations and actions performed. ● Complete all tasks outlined in the Machine Operators Work Instructions on a daily basis. ● Attend weekly Machine Operator meetings to stay updated on any changes or improvements. ● By diligently executing these responsibilities, you will contribute to the overall efficiency and productivity of the production process and ensure the delivery of high-quality goods to customers. *Please note that this job description is subject to change as needed based on the evolving requirements of the role and the production environment. \nCompany Description Unit Pack is a family-owned and operated company with over 60 years of experience in packaging liquids, creams, gels, serums, oils, and greases in single-use packages. Our packaging solutions include customized designs, classic sachets, and affordable and high-quality pouches showcasing brands. At our Certified Organic and FDA-registered facility, we maintain rapid changeover ability and consistent on-time delivery, ensuring that customer needs are always met. Our long-standing partnerships in cosmetics, pharmaceuticals, and industrial industries have made us a trusted name in the business for over three generations. Unit Pack is a family-owned and operated company with over 60 years of experience in packaging liquids, creams, gels, serums, oils, and greases in single-use packages. Our packaging solutions include customized designs, classic sachets, and affordable and high-quality pouches showcasing brands.\r\n\r\nAt our Certified Organic and FDA-registered facility, we maintain rapid changeover ability and consistent on-time delivery, ensuring that customer needs are always met. Our long-standing partnerships in cosmetics, pharmaceuticals, and industrial industries have made us a trusted name in the business for over three generations.

Job DescriptionBenefits: • 401(k), • Health insurance, • Paid time off We are currently hiring for an experienced Electro-Mechanical Assembler for their Defense and Aerospace manufacturing company. The Electro Mechanical Assembler will assemble quality electro-mechanical motion application parts with the requirements of schematic drawings, technical data packages, statements of work, and/or other work instructions. This is a Direct Hire opportunity. Electro-Mechanical Assembler Responsibilities: • Independently assemble electro-mechanical motion application parts according to blueprint/schematic drawings, • Ensure proper ESD equipment is in place, • Perform visual, functional, and dimensional inspections, • Support other departments (machine shop and warehouse) when needed, • Generate reports and data entry as required for a work order, • Raise flags to the appropriate personnel whenever a nonconformance is suspected, • Set up and monitor the assembly room, • Ensure compliance to the prescribed QMS processes Electro-Mechanical Assembler Requirements • Must have Electro-Mechanical Assembler experience, • Experience assembling motion applications such as bearings, O-rings, soldering, magnets, etc., • Use of precision measuring tools such as micrometers, calipers, and gauges, • Interpret blueprint/schematic drawings Electro-Mechanical Experience & Abilities Desired • IPC-J-STD-001 Certified, Requirements for Soldered Electrical and Assemblies, • IPC-A-610 Certified, Acceptability of Electronics Assemblies, • IPC-A-620 Certified, Requirements and Acceptance for Cable and Wire Harness Assemblies Schedule: Monday-Friday 8am until 4:30pm (Overtime & Saturday availability when needed) Pay: $25-$30

Job DescriptionDescription: Job Summary: We are seeking full-time Safety Cable Assemblers to support multiple stages of our production process, including ferrule loading, cable grinding, crimping, and related assembly tasks. Assemblers will be trained on Safety Cable part numbers, specifications, quality requirements, and proper procedures for each operation. This role involves operating automated and pneumatic equipment, assembling components, and performing routine quality checks to ensure products meet all dimensional, visual, and safety standards. Assemblers are expected to maintain accuracy, consistency, and efficient workflow across all assigned tasks. Essential Job Functions: Equipment Operation: Safety Cable Assemblers may perform any of the following based on assignment: Ferrule Loading • Operate automated equipment to load ferrule magazines to the correct quantity., • Monitor equipment to verify proper operation and conduct periodic checks for ferrule count and orientation., • Respond promptly to abnormal machine behavior and notify supervision or maintenance when needed. Grinding • Grind Safety Cable ends to required finished dimensions using manual-guided grinding equipment., • Perform grinding disc changeovers and monitor equipment performance., • Inspect cable ends throughout the process to ensure compliance with dimensional and visual specifications. Crimping • String ferrules on cable using automated equipment, ensuring proper orientation and feed., • Operate pneumatic presses to crimp ferrules to specification, performing visual and dimensional inspections., • Set up and adjust crimping equipment according to part numbers, tooling, and required lengths. Material Identification and Tracking • Identify and correctly handle various Safety Cable materials, including ferrules, cable types, and sleeves., • Verify part numbers, materials, and job specifications before beginning production., • Maintain accurate batch counts and document completed work as required. Communication & Collaboration: • Communicate effectively with management regarding production status, non-conformances, and material or equipment concerns., • Work cooperatively with team members to support production flow and meet daily goals. Quality & Safety Compliance: • Follow production drawings, work instructions, and part specifications for each product type., • Conduct in process inspections to ensure accuracy, consistency, and compliance with quality standards., • Immediately report any out of spec conditions, material issues, or equipment problems., • Maintain a clean, organized, and safe work area, adhering to all safety procedures.Requirements: Qualifications: • Strong attention to detail required, • Ability to safely operate automated, pneumatic, and mechanical equipment required, • Ability to read and interpret part numbers, basic measurements, and technical instructions required, • Ability to follow written and verbal instructions required, • Demonstrated commitment to quality, accuracy, and consistency required, • Ability to work efficiently in a fast paced manufacturing environment required, • Ability to stand and/or sit for long periods required, • Must be able to lift a minimum of 30 lbs. required, • Shift Differential available Management reserves the right to assign or reassign duties and responsibilities to this job at any time. EOE, including disability/vets

Job Description Job Summary Royal Master grinders is looking to hire an individual to work in our electrical assembly department. We are a manufacturer of machine tool that is shipped worldwide. We rare rapidly growing are expanding our electrical assembly department. Your responsibilities would include wiring panels for machines and integrating them into the mechanical assemblies of the machine. Duties include: • Assemble electrical components according to specifications and schematics., • Perform wiring tasks, including soldering and connecting wires to various devices., • Fabricate parts as needed for assembly using tools such as calipers and other measuring instruments., • Test assembled products using Ohmmeters and other testing equipment to ensure functionality., • Troubleshoot and resolve any issues related to electrical assemblies or components., • Collaborate with team members to improve assembly processes and product quality., • Maintain a clean and organized work area, adhering to safety protocols at all times. Experience • Proven experience in electrical assembly or a related field is preferred., • Strong understanding of electrical wiring, logic controllers, and PCB assembly techniques., • Familiarity with reading and interpreting schematics is essential., • Mechanical knowledge is a plus, including the ability to use hand tools effectively., • Experience with soldering techniques is highly desirable.\nCompany Description We are a family owned business that is quickly growing. We manufacture a machine tool that is used in many different fields worldwide. We are a family owned business that is quickly growing. We manufacture a machine tool that is used in many different fields worldwide.

Job Description Do you like building things and seeing how machines work? If so, our fast-paced machine assembly shop may be the right place for you to advance your skills. In this position, you will assemble electrical and mechanical assembly controls and integrate them into components from start to finish. You will also be testing components to ensure quality standards are met. Attention to detail and good organizational skills are key for this position. Requirements • Hands-on experience with electrical and mechanical assembly, • Experience with electrical wiring, control panels, electrical components, and machine wiring, • Ability to assemble and integrate electrical controls into machinery and equipment, • Ability to read and work from mechanical drawings, electrical schematics, and wiring diagrams, • Troubleshooting experience, • Occasional travel to service our customer units, • Machine shop or industrial equipment assembly experience preferred, • PLC programming experience helpful, • 2-year degree, technical school training, or equivalent work-related experience, • Must be highly organized and detail-oriented, • A team player who enjoys working with people Benefits • Competitive base + bonus structure., • Comprehensive benefits: medical, dental, life, 401(k), profit sharing., • Paid time off and holidays., • Travel expense reimbursement., • Collaborative culture with community involvement. This is a full-time position, Monday – Friday 7:30 am – 4:00pm Why Join Us? We’re a company built on technical excellence and strong customer partnerships. Our members are at the core of what makes us successful. Many of our team members have been with us for years. We believe in competitive pay, long-term stability, a professional high-performance environment, and an environment where people enjoy working together. AZCO Corp., established in 1983, manufactures simple-to-use, reliable feeding, cutting, inserting, and dispensing units for the converting, packaging, food, and medical industries. We specialize in providing solutions for complex and unique custom applications. Our experience has provided us with valuable insight and the ability to identify the exact, field-proven techniques and methods best suited for each operation. \nCompany Description AZCO Corp has over 40 years of experience developing solutions for a wide range of feeding, cutting, and dispensing applications. It offers cutting-edge, field-proven systems and components. AZCO Corp has over 40 years of experience developing solutions for a wide range of feeding, cutting, and dispensing applications. It offers cutting-edge, field-proven systems and components.

Job Description Overview Your next adventure starts here! At Lucky Strike Entertainment, great times and exciting opportunities go hand in hand. Join us as a Mechanic and become part of a vibrant atmosphere filled with dynamic experiences and endless possibilities. Start making your own luck today! Applicants must be at least 18 years of age to qualify for a position. WHAT OUR MECHANICS DO Our Experienced Mechanics make sure our lanes, pinspotters/pinsetters, and other building equipment are all in tip-top shape by performing preventative maintenance and making emergency repairs when necessary. If you’ve got a strong mechanical aptitude and a history of exceptional performance, you’ll thrive as a member of our team. A MECHANIC’S DAY-TO-DAY: • Abide by and maintain all safety procedures as required by Lucky Strike Entertainment and OSHA., • You are responsible for keeping the center equipment in full working order., • Fully understand how to operate all bowling equipment in the center, • Adhere to all outlined preventative maintenance programs and monitor and perform daily center maintenance as instructed., • Take charge and ensure the shop and machine area is clean and organized., • Assisting the Senior Mechanic with the training of new Mechanics. WHAT IT TAKES: • At least 1 year of Mechanical experience, • High School Diploma with a strong emphasis on algebra, geometry, and applied mathematics (Optional), • Excellent communication skills, • Ability to train new mechanics, • Availability to work nights, weekends, holidays, and extended workdays, • Proven team player PERKS (MORE REASONS YOU’LL LOVE YOUR JOB) • Free Bowling!, • $1 Arcade Play, • 20% off Events, • 50% off Food & Beverages WORK ENVIRONMENT/ PHYSICAL DEMANDS: • Typical entertainment environment where you will walk, bend and stand for periods of time, and may lift objects with some assistance. Job Type: Part-time Shift: • Evening shift, • Night shift Weekly day range: • Weekend availability Work Location: One location Responsibilities Lucky Strike Entertainment, formerly Bowlero Corp, is one of the world’s premier location-based entertainment platforms. With over 360 locations across North America, Lucky Strike Entertainment provides experiential offerings in bowling, amusements, water parks, and family entertainment centers. The company also owns the Professional Bowlers Association, the major league of bowling and a growing media property that boasts millions of fans around the globe. For more information on Lucky Strike Entertainment, please visit ir.luckystrikeent.com. The pay range for this position is $17.00 to $19.00 / hour Lucky Strike Entertainment offers performance-based incentives and a competitive total rewards package which includes healthcare coverage and a broad range of other benefits. Incentives and/or benefit packages may vary depending on the position. More details regarding benefits are available here: www.bowlerocorp.com/careers/benefits

Job Description Automotive and Truck Technicians / Mechanics Wanted! Light and Medium Duty – Full Time Established in 1930, Frank's Truck Center is an award-winning dealership serving our clients with high quality customer service. We're looking for energetic, experienced mechanics to add to the growing team in our world-class Service Department. We are looking for experienced mechanics who are ready to move their career forward. Our customers’ needs range from preventative maintenance to repairs of all levels on all variety of vehicles and we rely on our experienced technicians to keep our customers’ vehicles in shape and on the road. Your skills and experience are recognized, and you’ll get to work on lots of different types of equipment—including GMC, Freightliner, Hino & Isuzu. We work hard to get the job done, but we also make sure you have the time you need to do the job right. Safety and reliability are our top priorities. And we don’t stop there. We want our techs to be at the top of their game, so we make sure you are continuing to get the training you need to advance in your career. We offer a full benefits package including: • Competitive hourly salary – $20-$40 per hour, depending on experience, • Top pay for A-Level Technicians, depending on experience, • Increase earnings potential with Efficiency Bonuses, ongoing training and opportunities for overtime, • Opportunities for advancement with factory paid training!, • Union Shop - Annual union scale salary increases, • Health, Dental, Vision insurances, • 401(k) AND Pension Plan, • Paid Time Off and Sick Time, • Uniform Service, Work Boot allowance & Tool Allowance, • Closed on Sundays, • Weekly pay days Some Job Responsibilities are: • We are looking for experienced Diesel Mechanics with the knowledge and leadership to grow our business., • The day-to-day duties include diagnosing and preparing vehicles for repairs, performing repair work with the utmost of skill and accuracy and completing all duties in a timely manner., • Operate various manufacturer computer programs to run diagnostic tests., • Perform work specified on the repair order with efficiency and in accordance with dealership, • Test-drive vehicles, and test components and systems, using diagnostic tools and special service equipment, • Diagnose, maintain, and repair vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc., • Perform routine maintenance on trucks: rotating tires, changing engine oil, replacing oil and fuel filters, inflating tires, replacing worn brake pads and shoes, replace clutches., • Communicate directly with the Service Advisor so that customers are informed if any additional service is needed., • Provide an estimate of time needed for additional repairs, • Execute repairs under warranty to manufacturer specifications, • Willingness to contribute to the team by participating in ongoing training, • Perform all work adhering to all safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice., • Regular, predictable attendance is an essential function of the job Qualifications needed are: • High school diploma or equivalent, • 2-5+ years of Service Technician experience required, • A or B level qualification including Diagnostic, Electrical and Engine Repair preferred and a PLUS, • ASE Certification preferred and a BIG PLUS, • Technical Training preferred and a PLUS, • Mechanical and troubleshooting skills and ability to learn new technology, repair and service procedures and specifications, • Ability to lift 50-75 lbs. or more with or without assistance, • Ability to work independently and as part of a team, • Basic written and verbal communication skills, • Valid driver's license and clean driving record, • Ability to work in a shop environment that is affected by frequently changing temperatures., • Excellent customer service skills and basic computer competencies, • Positive, friendly attitude, along with an eagerness to continue to learn and keep up with certifications and training Family owned and operated for over 90 years Frank's Truck Center and Frank's GMC is a proud GMC franchise in addition to representing Hino, Freightliner & Isuzu commercial trucks. Our dealership is located in Lyndhurst, New Jersey and also has service, parts & financing departments on site. We specialize in commercial trucks and have a large commercial truck parts department that serves New Jersey, New York City and more. We are an equal opportunity employer and drug-free workplace. Frank’s Truck Center prohibits discrimination and harassment in regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Position Description: Electro/Mechanic Company History: Dr. Praegers was founded in 1994 with the mission to bring delicious frozen food to everyone. Its not every day that two heart surgeons get into the food business, but over 20 years ago thats exactly what our dads did. Motivated by what they saw in their practice, our parents set out on a mission to encourage sensible eating. They knew ingredients had to be nutritious and simple, that everything had to be delicious, and that their products needed to be super simple to make. While the world has changed since our little family business first got started, our focus remains true to our dads vision and we work every day to make them proud. To learn more visit: https://drpraegers.com/our-story/our-history/ Responsibilities: \tEnsures operation of machinery and mechanical equipment by completing preventive maintenance requirements on motors, pneumatic tools, conveyor systems, and production machines; following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications; troubleshooting malfunctions. \tLocates sources of problems by observing mechanical devices in operation; listening for problems; using precision measuring and testing instruments. \tRemoves defective parts by dismantling devices; using hoists, cranes, and hand and power tools; examining form and texture of parts. \tDetermines changes in dimensional requirements of parts by inspecting used parts; using rulers, calipers, micrometers, and other measuring instruments. \tAdjusts functional parts of devices and control instruments by using hand tools, levels, plumb bobs, and straightedges. \tControls downtime by informing production workers of routine preventive maintenance techniques; monitoring compliance. \tFabricates repair parts by using machine shop instrumentation and equipment. \tMaintains equipment, parts, and supplies inventories by checking stock to determine inventory level; anticipating needed equipment, parts, and supplies; placing and expediting orders; verifying receipt. \tConserves maintenance resources by using equipment and supplies as needed to accomplish job results. \tProvides mechanical maintenance information by answering questions and requests. \tPrepares mechanical maintenance reports by collecting, analyzing, and summarizing information and trends. \tMaintains technical knowledge by attending educational workshops; reviewing technical publications; establishing personal networks. \tMaintains continuity among work teams by documenting and communicating actions, irregularities, and continuing needs. \tMaintains safe and clean working environment by complying with procedures, rules, and regulations. \tContributes to team effort by accomplishing related results as needed. \tTroubleshoot PLC hardware, and programing. \tWorking knowledge of control circuits, software knowledge, and relay logic/schematics. \tAbility and or working knowledge of High voltage power. \tRemove place and or program VFD, HMI, and electrical components as needed. \tMaintain cleanliness of the work area, including sweeping, using a squeegee, and properly disposing of trash, bad product, cardboard, and plastic in designated bins. \tClean up after completing repairs, ensuring equipment and tools are cleaned and properly stored to keep the shop organized and safe. \tRegularly clean and organize maintenance tools and workspaces, especially after repairs, quality issues or equipment servicing to uphold a safe and efficient work environment. Qualifications/requirements \tMin 5 years experience \tTechnical or University degree or on-the-job experience a plus Strong bilingual communication skills (English and Spanish) to effectively interact with a diverse team and workforce \tKnowledge of packing equipment is a plus \tFreezer knowledge a plus \tStrong Sense of Safety \tAbility to walk, bend, stoop, reach, squat and lift up to 50lbs is required. \tColor Vision required. Food safety and quality responsibilities \tEnsure proper functioning of equipment necessary to support proper identification, control, monitoring, and documentation of Critical Control Point \tEnsure quality and safety specifications are met \tDemonstrate food safety and quality, SSOP and GMP policies and procedures \tIdentify employees, processes, and refresher training needed to appropriate management Disclaimer: Employee must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodation will be made to enable employees with disabilities to perform the essential functions of their job, absent undue hardship. Dr. Praeger's Sensible Foods is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, creed, color, religion, alienage or national origin, ancestry, citizenship status, age, disability or handicap, sex, marital status, veteran status, sexual orientation, genetic information, arrest record, or any other characteristic protected by applicable federal, state or local laws. Our management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities and general treatment during employment. $25.00 - $30.00 Hourly

Job Description Join Our Growing Dental Team! Are you a dedicated and experienced Dental Assistant looking to be part of a dynamic team? At our state-of-the-art dental practice, we are on a mission to provide outstanding dental care that consistently exceeds our patients' expectations. We pride ourselves on creating a welcoming and safe environment for both our team and patients. In this full-time role, you will play a crucial part in our daily operations. Your responsibilities will include assisting in various dental procedures, utilizing the Itero Machine, performing X-rays, and creating temporaries, all while maintaining our high standards of cleanliness and safety. We are seeking candidates with 3-5 years of dental assisting experience who are enthusiastic about their work and keen to expand their skills in a supportive setting. Your expertise will be valued as we foster a collaborative atmosphere that promotes personal and professional growth. We offer a competitive hourly rate of $20-$25, commensurate with experience, as well as comprehensive insurance benefits. Join us in our commitment to creating a brighter, healthier future for our patients and the communities we serve. Don't miss this opportunity to be a part of our trusted dental practice! \nCompany Description We are a multi-specialty dental practice with two locations serving an affluent, discerning community that expects the very best. Built on cutting-edge technology, clinical excellence, and a luxury patient experience, we offer everything from cosmetic and restorative dentistry to complex implant and full-mouth cases — all under one roof. But beyond the treatments we provide, our mission is simple: to make a real difference in our patients' lives — caring deeply for their health, their quality of life, and their longevity. We are ambitious, fast-growing, and building the team and systems to take us to the next level. We are a multi-specialty dental practice with two locations serving an affluent, discerning community that expects the very best. Built on cutting-edge technology, clinical excellence, and a luxury patient experience, we offer everything from cosmetic and restorative dentistry to complex implant and full-mouth cases — all under one roof. But beyond the treatments we provide, our mission is simple: to make a real difference in our patients' lives — caring deeply for their health, their quality of life, and their longevity. We are ambitious, fast-growing, and building the team and systems to take us to the next level.

Job Description Position Description: Dr. Praegers was founded in 1994 with the mission to bring delicious frozen food to everyone. Its not every day that two heart surgeons get into the food business, but over 20 years ago thats exactly what our dads did. Motivated by what they saw in their practice, our parents set out on a mission to encourage sensible eating. They knew ingredients had to be nutritious and simple, that everything had to be delicious, and that their products needed to be super simple to make. While the world has changed since our little family business first got started, our focus remains true to our dads vision, and we work every day to make them proud. To learn more visit: Dr. Praeger's HistoryResponsibilities: \tResponsible for compliance with all GMPs, Food Safety procedures, and regulatory standards that are established by OSHA, FDA, USDA, and Dr. Praegers Sensible Foods. \tKeep the work area clean. \tResponsible for keeping pallets neat and orderly. \tTransport trash and debris away from production areas. \tMonitor the efficiency of the production line to ensure timely load and shipment. \tAssemble and prepare goods for shipment. \tAbility to follow directions. \tOperate heavy-duty equipment. \tUtilization of Redzone software \tFill out all documentation completely. \tSupport Machine operators as needed. \tStart and stop equipment. Physical requirements: \tAbility to lift and carry at least 50 lbs. \tMust be able to stand/walk for extended periods of time and frequently push, pull, bend, and reach. Skills (required): \tStrong communication skills. \tAbility to work in a team environment. \tBilingual preferred. Disclaimer: Employee must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodation will be made to enable employees with disabilities to perform the essential functions of their job, absent undue hardship. Dr. Praeger's Sensible Foods is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, creed, color, religion, alienage or national origin, ancestry, citizenship status, age, disability, or handicap, sex, marital status, veteran status, sexual orientation, genetic information, arrest record, or any other characteristic protected by applicable federal, state or local laws. Our management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities, and general treatment during employment. $16.00 - $16.00 Hourly

Job DescriptionDescription: Jimmy's Gourmet Bakery is looking for dependable and motivated Production Associates to join our production team. In this role, you will help package finished products, ensure quality standards are met, and support daily production operations in a fast-paced food manufacturing environment. If you're a team player who enjoys hands-on work and takes pride in producing quality products, we'd love to hear from you. Requirements: • Pack products according to company specifications and customer requirements, • Inspect products for quality and remove any items that do not meet standards, • Ensure the correct labels are applied to cartons and verify label accuracy, • Keep packaging equipment supplied with boxes and bag stock, • Monitor and operate packaging equipment, including box erectors, label applicators, case sealers, and palletizers, • Assist with basic equipment troubleshooting and clearing minor jams, • Maintain a clean and organized work area, • Follow all Good Manufacturing Practices (GMPs), food safety, and company policies, • Assist with the sanitation of production areas and equipment, • Wrap pallets manually when required, • Support production goals while maintaining quality and safety standards Qualifications • Previous manufacturing, production, assembly, warehouse, or machine operator experience preferred, • Food manufacturing experience is a plus, • Ability to work in a fast-paced environment, • Strong attention to detail and quality, • Reliable attendance and punctuality, • Ability to follow instructions and work as part of a team Physical Requirements • Ability to stand for extended periods on concrete floors, • Frequent bending, stooping, twisting, and reaching, • Ability to lift up to 40 pounds occasionally, • Ability to push and pull heavy objects as needed Our Commitment to You At Jimmy's Gourmet Bakery, we believe our team's success starts with feeling valued and supported. That's why we offer: • Competitive pay and performance bonuses, • 401(k) with company match, • Health, dental, and vision insurance, • Company-paid life insurance and EAP support, • Generous PTO and career growth opportunities Join a team that values your contributions and well-being.

Job Description Position Description: Dr. Praegers was founded in 1992 with the mission to bring delicious frozen food to everyone. Its not every day that two heart surgeons get into the food business, but over 20 years ago thats exactly what our dads did. Motivated by what they saw in their practice, our parents set out on a mission to encourage sensible eating. They knew ingredients had to be nutritious and simple, that everything had to be delicious, and that their products needed to be super simple to make. While the world has changed since our little family business first got started, our focus remains true to our dads vision, and we work every day to make them proud. To learn more visit: Dr. Praeger's HistoryResponsibilities: \tResponsible for compliance with all GMPs, Food Safety procedures, and regulatory standards that are established by OSHA, FDA, USDA, and Dr. Praegers Sensible Foods. \tKeep the work area clean. \tResponsible for keeping pallets neat and orderly. \tTransport trash and debris away from production areas. \tMonitor the efficiency of the production line to ensure timely load and shipment. \tAssemble and prepare goods for shipment. \tAbility to follow directions. \tOperate heavy-duty equipment. \tUtilization of Redzone software \tFill out all documentation completely. \tSupport Machine operators as needed. \tStart and stop equipment. Physical requirements: \tAbility to lift and carry at least 50 lbs. \tMust be able to stand/walk for extended periods of time and frequently push, pull, bend, and reach. Skills (required): \tStrong communication skills. \tAbility to work in a team environment. \tBilingual preferred. Disclaimer: Employee must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodation will be made to enable employees with disabilities to perform the essential functions of their job, absent undue hardship. Dr. Praeger's Sensible Foods is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, creed, color, religion, alienage or national origin, ancestry, citizenship status, age, disability, or handicap, sex, marital status, veteran status, sexual orientation, genetic information, arrest record, or any other characteristic protected by applicable federal, state or local laws. Our management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities, and general treatment during employment. $16.00 - $16.00 Hourly

Job Description At Phillip Jeffries, we’re on a mission to make the world more beautiful, one wall at a time. What started in a family garage in 1976 has grown into a global leader in luxury wallcoverings, known for our exceptional products, elevated service, and passion for design. We believe in building strong relationships and creating standout experiences for our clients around the world. If you’re inspired by thoughtful design, meaningful relationships, and being part of a team that’s shaping extraordinary interiors, we invite you to apply for Sample Manufacturing Associate. In this role, you’ll be responsible for picking and packing our wallcovering with precision, reporting to the Sample Manufacturing Assistant Manager and based at our Fairfield, NJ location with the working shift Monday – Friday 6am-2:30pm What You’ll Be Doing • Manually glue Phillip Jeffries samples, meeting daily production metrics (expected output of approximately 200 samples per hour), • Select master samples based on daily picking lists and provide them to machine operators as needed, • Refile master samples accurately at the end of each shift and upon completion of sample runs, • Receive incoming product and properly store materials in designated warehouse locations, • Become cross‑trained on the guillotine and other equipment as needed, • Assist with sample gluing and related production tasks, • Maintain and clean all necessary equipment, • Keep work areas clean, organized, and free of debris, • Support the Sample Manufacturing Assistant Manager with additional tasks as assigned What You Bring to the Table • Previous warehouse experience preferred, • Ability to multi-task and prioritize tasks, • Good attendance & punctuality, • Respectful and courteous, • Strong attention to detail and follows through skills., • Excellent time management and follow up skills, • Strong communication skills - both verbal and written, • Ability to work in a team or as a single individual, • Basic computer skills, • Possess high integrity, • Able to work in a fast-paced, team-oriented environment, • Experience with WMS systems, a plus Physical Requirements • Ability to stand for extended periods, • Capable of lifting 50–100 pounds The Phillip Jeffries Experience At Phillip Jeffries, we believe exceptional work deserves exceptional care. Our commitment to creating a more beautiful world extends to how we support our team, offering thoughtfully designed benefits and meaningful perks that reflect our appreciation for your talent and time. Your Compensation Journey • Hourly rate starting at $19.25 an hour, based on your experience and technical expertise, • Annual bonus opportunity to reward your performance, • Cost of Living increases that honor your growth and commitment, • Generous retirement plan with an automatic company contribution of approximately 10 percent with no employee match required Health Benefits That Take Care of You • Comprehensive medical coverage with employee premiums as low as $40 per month, • Coverage options for spouse, domestic partner, civil union partner, and family, • Health Reimbursement Account (HRA) to offset medical expenses, • Prescription, dental, and vision coverage to support whole-person wellness, • Flexible Spending Accounts (FSAs) for healthcare and dependent care, • Employee Assistance Program that supports your mental, financial, and physical well-being, • Pet insurance for your four-legged companions Time to Recharge • 16 paid personal days each year to relax, recharge, or travel, • Paid holidays including New Year’s Day, Martin Luther King Jr. Day, Memorial Day, Independence Day, Labor Day, Thanksgiving Day, the day after Thanksgiving, Christmas Eve, Christmas Day, and New Year’s Eve, • Additional paid time off during our annual company closure between Christmas and New Year’s, • Earn extra paid time off by completing your annual wellness physical, • Up to three paid days each year to give back through volunteer work Career Elevation • Structured onboarding with clear 30, 60, and 90-day milestones and continued training for long-term success Perks at Work • Exclusive employee discount on Phillip Jeffries wallcoverings to elevate your home, • Access to Working Advantage with discounts on travel, entertainment, and everyday purchases Phillip Jeffries is an Equal Opportunity Employer committed to diversity, inclusion, and equality in the workplace. All qualified applicants will receive consideration for employment without regard to sex, race, color, age, national origin, religion, physical and mental disability, genetic information, marital status, sexual orientation, gender identity/assignment, citizenship, pregnancy or maternity, protected veteran status, or any other status prohibited by applicable national, federal, state or local law.

Job Description1. Standing Majority of Day 1. Ability to lift or move 25-49 pounds, 2. Business Travel Not Required, 3. Ability to Gown for Manufacturing, 4. Operate vial filling machines, fabrication machines, and/or secondary packaging equipment including labels and semi-automatic packaging equipment.., 5. Meet established scrap rate goals., 6. Clean and set up manufacturing/packaging equipment., 7. Assure appropriate calibration stickers are current., 8. Record all necessary documentation in appropriate logbooks and batch records., 9. Communicate with IPC Operator and Supervisor on all issues concerning quality, components, and machine performance., 10. Palletize completed work and transport to warehouse as necessary., 11. Complete downtime log accurately and contemporaneously., 12. Assure that all reconciled labeling; e.g. pouchstock, inserts, shipper labels and waste is properly accounted for., 13. Communicate mechanical issues and other Production information with incoming and outgoing shifts., 14. Knowledgeable of all appropriate SOP"s and their practical application. Hours are 1st Shift 6:15 am - 2:30pm 2nd shift 2:15pm - 10:30pm $20 to $24 per hour. QUALIFICATIONS/REQUIREMENTS: *High School graduate or equivalent *Minimum of 3 years of Pharmaceutical packaging experience required *Basic reading, writing and verbal skills *Basic mathematic skills *Able to wear safety glasses, hearing protection, full face/half mask respirator, latex gloves, Tyvek suit and other safety equipment as needed *Basic use of tools and equipment *Must possess good manual dexterity and visual acuity By applying for this job, you agree to receive calls, Al-generated calls, text messages, or emails from Synerfac Technical Staffing and our contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undeliverable messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at www.synerfac.com/privacy/

Job DescriptionWe're looking for entrepreneurial minded people to manage and operate a Scream Truck! We provide the infrastructure and the truck, you become your own boss (a "Scream Truck Pro"), managing the daily operations of a state-of-the art, tech forward food truck. If you've been looking to start and operate your own business, but don't want to take on the risk, this role is for you! Minimum earning potential is $60,000/year, but we offer multiple commission and rev share opportunities to reach $80,000+/year. This opportunity is not easy, but it is REALLY fun and rewarding! What feels better than being a part of a community and doing something that makes people happy? The Scream Truck Pro is responsible for managing all daily operations for a single truck. This includes prepping the truck (cleaning and stocking), preparing premium, aesthetically pleasing ice cream treats, and delivering the Scream Truck experience to excited customers. You will also be responsible for reviewing and meeting revenue goals, training and supervising other operators ("co-ops") for your truck, following strict food safety and driver safety standards,A "Scream Truck Pro" is the customer facing leader of the brand and must ensure exceptional service standards are consistently met. SCHEDULE • Five (5) days per week (typically, but not limited to Wednesday-Sunday) year-round operating a Scream Truck vehicle, • Typical operating hours are 1:00PM-10:00PM, but can vary based on the season or day of the week, • One FULL weekend off per month between May and August, • One weekend day off per month OR one FULL weekend off every other month between September AprilCOMPENSATION+ Annual base salary of $60,000 paid weekly ($48,000 base + $12,000 guaranteed gratuity)+ 10%-15% commission on events you sell to new clients anywhere in our service area+ Very achievable 10% rev share bonus for all revenue earned above your annual revenue goal+ Paid vacation/PTO+ Company subsidized medical/dental/vision benefits (Optional)+ Phone Stipend + Complimentary annual Scream Truck event RESPONSIBILTIES • Service customers via reserved routes, private events, “pop-up” events, corporate events, and community events within the assigned territory, • Stocking and cleaning the truck for each day’s operations, • Training and evaluating full and part-time “Co-Op(s)” that will assist the Scream Truck Pro complete all duties, • Regular meeting with Regional Manager to set a monthly operating schedule and review revenue goals, • Weekly deep clean of your ice cream machine to ensure compliance with health and safety regulations, • Monitoring weather conditions to ensure the truck operates on the most opportune days, • Alongside the Regional Manager, managing truck and equipment repairs & maintenance, • Review monthly financial information such as sales and costs versus budget, • Document and discuss current co-op staff performance and staffing needs or changes., • Expectation to work some holidays (Closed Thanksgiving + Christmas Day), • Executing special routes or event experiences (Santa on the truck, Free Scream for Mom on Mother's Day, New Year's Eve events, etc.)PERKS, • Be your own boss!, • Work mobile and OUTDOORS (not stuck behind a desk), • Free Scream Truck Treats + Free Annual Event + Discounted Events, • Be a part of an exciting startup that is just starting to expand nationally, • Upbeat and FRIENDLY Staff (find your new BFF), • Deliver to HAPPY customers (it makes us happy to see them so excited for Scream Truck)REQUIRED QUALIFICATIONS, • Squeaky clean driving record and ability to safely drive a large vehicle (think UPS or FEDEX truck). NO CDL required, we train you!, • Over 21 years of age (due to driving/insurance restrictions), • Upbeat, friendly, and outgoing personality, eager to happily serve customers, • Available to work with a flexible schedule including weekends and holidays, • Strong work ethic with a “CAN-DO” attitude, • Excellent communication skills, • Tech savvyPREFERRED QUALIFICATIONS, • Food service experience, • Comfortable driving a truck or large vehiclePHYSICAL REQUIREMENTS, • Ability to alternate between sitting and standing frequently during shift, • Ability to travel through a cabin of approximately 2.5 feet wide efficiently, • Ability to operate equipment such as an ice cream machine, shake blender and point of sale, • Ability to reach above head for items on shelves, • Ability to occasionally lift up to 25lbsABOUT SCREAM TRUCKOur mission is simple. We give people something to look forward to.Click here for a 360 view of truck!Scream Truck is the world's first fleet of experiential, personalized food trucks! We operate a fleet of 15+ ice cream trucks in New Jersey and recently started franchising. Scream Truck was founded in 2020 with a team of 3 (we were just an idea pre-covid) and quickly developed an exceptional reputation for delivering happiness. Yes, we serve delicious ice cream and other treats, but there's so much more to the experience Scream Truck delivers. We've developed proprietary software to help us efficiently navigate through various neighborhoods and maintain a profitable and predictable business model. WHAT WE DOReserved Routes - home delivery service. We text customers when we're coming to their neighborhood!Private Events - Private events are booked online in advance with a specific date, time and number of people. Personalized message on our LED screens and custom menus for birthday parties, showers, mitzvahs, corporate teams and more!Community Pop Ups - Pay-per-item public events for big or small group (festivals, school fundraisers, office buildings). HOW IT WORKSSign up for Reserved Routes at www.screamtruck.com - we'll text you whenever we service your neighborhood! Simply reply Y to request a stop. Pre-order, pre-pay and voila! Book events instantly online at www.screamtruck.com

Job Description Overview SP+, a Metropolis company, is an artificial intelligence company for the real world. We use computer vision to enable checkout-free parking experiences. So there’s no fumbling with tickets, machines, apps, or credit cards. You just “drive in and drive out.” We are the largest parking network in America, with over 23,000 employees powering mobility at over 4,000 locations across North America and Europe. Today, we are reinventing parking. Because it’s important, it's everywhere and impacts everyone. Tomorrow, we will power checkout-free experiences anywhere you go to make the everyday experiences of living, working, and playing remarkable - giving us back our most valuable asset, time. Responsibilities Utilizes a quality customer service orientation, receives payment from customers for parking services and facilitates the flow of traffic through the gate by performing the following duties: • Responsible for being at work every scheduled day, on time and in uniform., • Counts “bank” of revenue at beginning of shift to ensure starting total is correct., • Collects cash and/or validations and maintains security of cash., • Makes change and issues receipts or tickets to customer for each transaction., • Computes or recomputes bill from ticket showing amount due per customer., • Operates cash register after time calculation (manually or by machine), calculates cost or transaction and displays cost of customer transaction on cash register., • Quotes prices for parking services for which money is received upon customer receipt., • Gives directions to customers to various locations in the city., • Completes lost ticket forms when original tickets cannot be located., • Resolves customer complaints independently or with the aid of a supervisor., • Answers telephone in a prompt and courteous manner., • Maintains cleanliness of booth and picks up trash in the surrounding area., • Conducts timely checks to see if a proper inventory of necessary work aids and supplies are located in booth., • Verifies log of shift transactions against bank of “revenue” on hand., • Compiles “bank” of collected revenue during the day once a predetermined amount of money has been collected., • Record amounts received, cars in/out of facility, cars left in a facility (if applicable) while preparing shift report of transactions., • Any other duties that may be assigned by the supervisor. Qualifications Qualification Requirements: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Education and/or Experience: less than high school education or up to one month related experience or training or equivalent combination of education and experience. Availability to Work: Special shift requirements, if any, will vary depending on a location's hiring needs. If applicable, availability to work 2nd shift, 3rd shift and/or week-ends may be required. License Requirement: The employee will be required to have and maintain a valid state-issued driver’s license with a current address and acceptable driving record. Mathematical skills: ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Ability to make change. Language skills: ability to read and comprehend simple instructions, short correspondence and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, supervisors and other employees of the organization. Reasoning ability: ability to apply common sense understanding to carry out detailed but standard written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Other skills and abilities: ability to use clock (standard/military time), calculator (optional) or credit card machine to handle transactions. Ability to maintain a pleasant and mannerly demeanor when speaking on the telephone and with the public. Ability to effectively respond to customer problems or complaints. Physical demands: the physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, use hands to finger, handle, or feel objects, tools, or controls and reach with hands and arms. The employee is occasionally required to walk and sit. Specific vision abilities required by this job include close vision. Salary Range: $16.00/hr Benefits: Eligible employees will participate in the various benefits plans including medical, dental, vision, flexible spending accounts, long/short term disability, life insurance, accident insurance, 401k and paid time off. SP+ is an equal opportunity employer committed in policy and practice to recruit, hire, train, and promote, in all job classifications, without regard to race, color, ancestry, religion, sex, age, national origin, citizenship status, marital status, sexual orientation, veteran status, gender identity, disability or other classes protected by federal or state law. SP+ does not tolerate harassment or retaliation against any employee or applicant based on these characteristics or because the individual exercised their EEO rights. Right to Work Poster SP+, a Metropolis Company, may utilize an automated employment decision tool (AEDT) to assess or evaluate your candidacy for employment or promotion. AEDTs are used to assist in assessing a candidate’s application relative to the required job qualifications and responsibilities listed in the job posting. As part of this process, SP+ retains data relevant to your candidacy, including personal information, for a period that is reasonably necessary for the use of the tool. If you are hired for the position, your data may become part of your employee records. If you are an applicant to a New York City job posting and wish to request an alternative selection process accommodation or have questions about our data retention policy, please contact Recruit@spplus.com. We are here to assist you.

Job DescriptionCompany Description Sea Breeze manufactures and distributes premium beverages on tap in the Metro New York—New Jersey area. Since 1925, we have provided customized design, installation, and repair of bar guns and beverage dispensing systems to hospitality, educational, and healthcare facilities. We also manufacture a variety of chocolate syrups, pancake syrups, cocktail mixers, and other flavored syrups for retail distribution in the US and globally. Job Description Assist lead soda machine mechanic at customer’s locations to install new beverage dispensing systems and possibly do repair work as well. The coverage area is the Metro New York / New Jersey area. Approximately your first two weeks of work will be training at our headquarters in Northern New Jersey. Professional team environment. HOURS: Monday to Friday 8:00 AM - 5:00 PM, but flexibility needed Pay/Benefits: $19.00/hr Medical/Dental/Life Insurance (after three months) - **100% free medical insurance (extra cost for +spouse, +child or + family) Generous roll-over vacation and sick time (after three months) with Health Pay Bonus Bonuses for recruiting new accounts Company provided: Van, phone, uniform, boots & jacket. Consistent year round work Qualifications • Valid and clean driver’s license -- Pass drug test -- Great mechanical aptitude -- Ability to “take charge” -- Good people skills -- Good technology skills Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description This job post is collecting resumes for manufacturing shop clerks in our Garfield, NJ warehouse. It does not necessarily mean we currently have an opening. Once you apply your application will be saved in our database for future openings. Positions on the manufacturing shop floor include assemblers, engravers, laminators, screen press operators, packaging and floaters. SOME ESSENTIAL DUTIES AND RESPONSIBILITIES OF EACH ROLE ARE: ASSEMBLER • Review products for quality control and to ensure they meet expectations, • Disassemble, modify, and reassemble products, • Examine connections for correct fit of parts and subassemblies, • Maintain a safe and clean environment, comply with safety regulations, • Troubleshoot malfunctions, alert supervisors if repairs are needed, • Maintain inventory, expedite supply orders when inventory levels are low, • Minimize waste by conserving materials and resources ENGRAVER • Monitor equipment operation to ensure that products are not flawed., • Set equipment controls to meet cutting specifications., • Engrave and print patterns, designs, etchings, trademarks, or lettering onto flat or curved surfaces of a wide variety of metal, glass, plastic, or paper items, using hand tools or hand-held power tools., • Mount materials or workpieces onto production equipment., • Examine engraving for quality of cut, burrs, rough spots, and irregular or incomplete engraving., • Clean workpieces or finished products., • Insert cutting tools or bits into machines and secure them LAMINATOR • Receive production orders and job assignments from supervisor, • Verify the materials supplied for production are correct to produce job., • Set up press by hanging the proper roll of film, setting up feeder and delivery and setting the correct timing and tension required., • Pull proof sheets to confirm material position, adhesion and appearance and secure an approval prior to the production run., • Complete job maintaining optimum production rate while maintaining all quality standards according to customer specifications or company guidelines monitoring for defects SCREEN PRESS OPERATOR • Inspect printed material to ensure the correctness in all areas of color, registration, stock, and all other customer specifications., • Adjust and maintain registration, color, perforations, and other customer specific printing specifications, • Conduct a visual inspection prior to printing of all material stock and ink for defects or noncompliance with job specifications., • Carry out the final inspection to ensure the material, ink, plates or screens, cylinder/rollers, tension, and all other necessary customer specifications are correct prior to the start of the running the job., • Adjusts all press machine parts and equipment: feeders, grippers, guides, feed wheels, cameras, and other machines parts, using proper equipment. PACKAGING • Scan product bar codes into computer system and sure the correct product items are as described per order., • Ensure quality control of orders and that they are packaged properly for outgoing shipping including the correct quantity, weight, and item numbers/custom., • Sort and count products before packaging., • Operate assembly machines such as product sealing and laminating machines., • Gather and obtain finished products throughout the warehouse from assemblers, engravers, laminators, screen press operators, and digital printing teams to then package for shipping., • Load products onto rolling cards and send them to the shipping team. EXPERIENCE AND QUALIFICATIONS • High school diploma/GED, • 1-2 years of experience or specialized training in general assembly preferred, • Ability to read, write, and understand English, • Ability to stand for long periods of time, • Ability to lift up to 50 pounds, • Ability to bend, reach, and stoop, • Skilled in operating hand and power tools preferred, • Strong attention to detail, may work on assignments that are routine in nature, • Respectfully take direction from supervisors, overall positive attitude, • Follow standard practices and procedures when directed

Job DescriptionEHS, QMS & Regulatory Specialist Specialty Chemical Manufacturer | Carlstadt, NJ | Full-Time, On-Site About the Role Our client, an established specialty chemical manufacturer, is looking for an EHS, QMS & Regulatory Specialist to take ownership of environmental health & safety, the quality management system, and product regulatory affairs at their Carlstadt manufacturing facility. This is a hands-on, build-it role. In your first year, you'll help lead our facility through ChemStewards® and ISO 9001:2015 certification - then own and continuously improve both systems going forward. We're looking for someone with strong systems-building instincts and the drive to build this function from the ground up. Prior certification experience is a plus, but not required - what matters most is your ability to create structure where none exists and earn buy-in from people who don't report to you. What You'll Do Certification & Management Systems (First 6-12 Months) Lead the ChemStewards implementation - gap assessment, corrective action planning, documentation, and preparation for third-party verification Lead ISO 9001:2015 implementation - process mapping, internal audits, management reviews, and registrar/certification audits Build the document and record control architecture (SOPs, work instructions, forms, revision control) underlying both systems Environmental, Health & Safety Own EHS compliance across federal, New Jersey, and local requirements (OSHA, HazCom/GHS, LOTO, machine guarding, PPE, and more) Manage environmental permits and reporting (NJDEP, RCRA, NJPDES, EPCRA, TSCA) and DOT/PHMSA hazmat compliance Run chemical safety programs, incident investigations, OSHA 300 logs, training, safety meetings, and facility inspections Serve as the primary point of contact for regulatory inspections, insurance visits, and customer EHS audits Product Regulatory Affairs Verify and certify product/ingredient regulatory status (Prop 65, TSCA, SARA 313, and more) and track evolving chemical regulations Manage SDS creation/updates, product labeling, customer regulatory inquiries, and vendor documentation requests Prepare USMCA certifications, Certificates of Origin, and required regulatory filings Quality Own the quality management system across raw materials, in-process, and finished goods Partner with R&D and Operations on specs, test methods, and the nonconforming material process Run the internal audit program, manage the customer complaint process, and oversee supplier quality What You Bring Bachelor's degree in chemistry, chemical engineering, environmental science, occupational safety, or a related field 2-4 years of combined EHS and/or quality experience in chemical, specialty chemical, polymer, coatings, adhesives, or similar batch manufacturing Working knowledge of ISO 9001:2015 and OSHA/EPA/state environmental programs for chemical manufacturing Experience with internal audits, root cause analysis, and corrective/preventive action Strong SOP-writing and training skills, with solid MS Office and ERP/quality systems proficiency Comfort driving compliance across teams without direct authority - and the initiative to own ambiguous, build-from-scratch work Nice to have: direct experience with ChemStewards or a comparable EHS&S system (Responsible Care®, RC14001); experience in dispersion, emulsion, or polymer manufacturing; prior work at a growing or newly acquired manufacturer where systems were being built, not inherited. Work Environment This is an on-site role in an active chemical manufacturing facility. You'll spend time in production areas requiring PPE (safety glasses, footwear, gloves, and periodic respiratory protection), and should be comfortable standing/walking for extended periods, climbing stairs and ladders, and occasionally lifting up to 50 lbs. Bachelor's degree in chemistry, chemical engineering, environmental science, occupational safety, or a related field 2-4 years of combined EHS and/or quality experience in chemical, specialty chemical, polymer, coatings, adhesives, or similar batch manufacturing Working knowledge of ISO 9001:2015 and OSHA/EPA/state environmental programs for chemical manufacturing Experience with internal audits, root cause analysis, and corrective/preventive action Strong SOP-writing and training skills, with solid MS Office and ERP/quality systems proficiency Comfort driving compliance across teams without direct authority - and the initiative to own ambiguous, build-from-scratch work. By applying for this job, you agree to receive calls, Al-generated calls, text messages, or emails from Synerfac Technical Staffing and our contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undeliverable messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at www.synerfac.com/privacy/

Job Description Industrial Machine Builder Position Summary The Industrial Mechanical Assembler is responsible for assembling, fitting, and installing mechanical components and subassemblies used in industrial equipment and machinery. This role requires the ability to read technical drawings, use hand and power tools, and ensure that all assemblies meet quality and safety standards. Location: Fairfield, NJ 07004 Pay: $20 - $30 Shift: Monday to Friday , 6:30am – 3pm Open to entry level or junior candidates! Key Responsibilities: • Assemble mechanical components, subassemblies, and complete systems according to blueprints to build industrial packaging machines, • Read and interpret engineering drawings, schematics, and specifications to ensure proper assembly, • Drilling, tapping, and mounting of equipment and enclosures, • Align, fit, and secure parts using hand tools, power tools, and measuring instruments, • Perform precision measurements using calipers, micrometers, and gauges to verify tolerances, • Inspect finished assemblies to ensure quality standards and specifications are met, • Troubleshoot and resolve assembly issues, making adjustments or repairs as needed, • Maintain accurate documentation of work completed, including production and quality records, • Follow all safety procedures and maintain a clean, organized work environment Job Type & Location This is a Permanent position based out of Clifton, NJ. Pay and Benefits The pay range for this position is $65728.00 - $65728.00/yr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. • Medical/Dental, Life, and Disability Insurance- 80 hours of PTO (accrued)- 401k plan participation Workplace Type This is a fully onsite position in Clifton,NJ. Application Deadline This position is anticipated to close on Sep 25, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. \nCompany Description We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow. We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionCedar Bean’s Coffee Joint is growing. We’re an independent neighborhood coffee shop built around great coffee, genuine hospitality, creativity, and community. As we get busier, we’re looking for a few exceptional people to join our barista team. This isn’t a job where you’ll simply stand behind an espresso machine. Our baristas make drinks, prepare food, take orders, clean, restock, solve problems, learn our customers’ names, and help keep a busy coffee shop moving. We’re looking for people who take that responsibility seriously — and enjoy it. What You’ll Do • Prepare espresso drinks, brewed coffee, cold brew, tea, and specialty beverages consistently and accurately, • Learn and follow Cedar Bean’s recipes and drink standards, • Take customer orders and operate our Clover point-of-sale system, • Prepare breakfast sandwiches and other café food, • Provide friendly, attentive service to both new customers and regulars, • Work quickly and accurately during busy periods, • Maintain a clean, organized, and well-stocked bar, • Wash dishes, clean equipment, wipe tables, sweep, mop, and perform routine café cleaning, • Restock milk, cups, food, coffee, and supplies, • Complete opening and/or closing responsibilities, • Communicate clearly with coworkers and management, • Notice what needs to be done and help without waiting to be askedWhat We’re Looking For Previous specialty-coffee experience is key, but it isn’t our only consideration. Restaurant, café, retail or other fast-paced customer-service experience is also valuable. More importantly, you should be: • Dependable and punctual, • Friendly and comfortable talking with customers, • Able to stay calm and organized when we’re busy, • Comfortable working quickly without sacrificing quality, • Able to learn and remember a large drink and food menu, • Detail-oriented, • Comfortable receiving feedback and following established recipes and procedures, • Willing to clean and maintain the café — cleaning is part of everyone’s job, • Comfortable working as part of a team, • Able to work independently when necessary, • Someone who sees something that needs doing and does itThis Job May Not Be For You If… We’re a busy independent coffee shop, and we want applicants to understand the job before applying. This probably isn’t the right position if you’re looking primarily for a quiet place to hang out, don’t enjoy interacting with customers, dislike cleaning, have difficulty arriving on time, or aren’t comfortable working quickly when several orders come in at once. Coffee experience is key. Reliability, hospitality, and work ethic are essential. Schedule We are looking for team members who can commit to a consistent schedule. Please include your actual weekly availability when applying. Compensation $16/hour + tips Average total hourly compensation is approximately $20-22/hour, depending on tips. • Paid training, • Employee discounts, • Supportive, creative, independent coffee shop environment, • Opportunity to learn specialty coffee and develop barista skillsAbout Cedar Bean’s Cedar Bean’s Coffee Joint is an independent neighborhood coffee shop in Cedar Grove, New Jersey. Since 2018, we’ve worked to create something more than a place to buy coffee. Cedar Bean’s is a gathering place for our community, with local art, live music, open mics, events and a team that genuinely gets to know the people who walk through the door. We’re proud of the coffee we make. We’re equally proud of the way we treat people. To Apply Please send us: • Your résumé or brief work history, • Your current weekly availability, • Your earliest possible start date, • A few sentences answering: What does great customer service look like when a coffee shop is extremely busy? Applications that don’t include availability and an answer to the question above may not be considered. By applying to this job, you agree to receive periodic text messages from this employer and Homebase about your pending job application. Opt out anytime. Msg & data rates may apply. Powered by Homebase. Free employee scheduling, time clock and hiring tools.

Job Description Come join us, this position may be eligible for a sign on bonus. In person on site interviews will be conducted with our Hiring Managers. Come in to see our State of the Art Manufacturing Facility. We are making offers on the spot if you qualify after the interview. Come start your Career with us! Because of the need for consistent, in-person collaboration and/or the requirement to perform all work onsite due to the nature of this particular role, it will be performed full-time on site. This means work will be conducted on location at a BAE Systems facility 100% of the time. This position is first shift working a 9/80 schedule with every other Friday off! You don t see it, but it s there. Our employees work on the world s most advanced electronics from saving emissions in the City of Lights to powering the Mars Rover to protecting the F-35 fighter jet. At Electronic Systems, you ll be among the brightest minds, working on the aerospace and defense industry s most difficult problems. Drawing strength from our differences, we re innovating for the future. And you can, too. Our flexible work environment provides you a chance to change the world without giving up your personal life. We put our customers first exemplified by our missions: We Protect Those Who Protect Us and We Innovate For Those Who Move The WorldTM. Sound like a team you want to be a part of? Come build your career with BAE Systems. C4ISR:In Command, Control, Communications, Computers, Intelligence, Surveillance, and Reconnaissance (C4ISR) solutions, you ll help develop systems that sense, control, exploit and disseminate actionable information to warfighters supporting a variety of missions. 1. Assembles electronic components, assemblies, subassemblies and modules by working from samples, visual aids, prints, wiring lists and diagrams, routing instructions and process sheets using appropriate tooling and machinery. Assembles parts using fasteners in the build-up of electronic assemblies. Verifies results to ensure conformance with requirements and performs rework as needed. 2. Performs mechanical assembly operations in the build of electronic assemblies using standard measuring tools and techniques. 3. Performs electronic assembly operations such as wire termination, and installation of wire harness, cable assemblies, relays, transformers, capacitors, resistors or other electronic components. 4. Fabricates wires on a Jig Board (Harness Board) in accordance with specifications. Continuous laces, flat laces and spot ties wire into bundles and routings according to drawing requirements. 5. Prepares wires by performing the following tasks: routes, dresses and terminates conductors to specific dimensions as specified by instructions. 6. Pre-stages circuit card kits and forms components by use of machine and hand devices, which meet general requirements and Manufacturing Control Specifications (MCS). 7. Performs masking operations prior to wave soldering or coating of circuit card assemblies (CCA). Cleans boards per Manufacturing Control Specifications (MCS). 8. Performs other duties and responsibilities as required. Required Education, Experience, & Skills Required education: High School/GED Requires at least 2 year of electronic assembly experience, preferably soldering cables and connector assemblies. Required Training or certification in IPC-J-STD-001 Able to interpret and understand the instructions on process sheets, prints or route cards. Able to use hand tools (cutters, pliers, preformers, screw drivers, etc.). Able to identify electronic components and properly orient them into a circuit board according to polarity. Able to use measurement tools such as scales, micrometers and calipers. May be required to achieve specified solder certification in various assembly/soldering techniques per Company and customer standards. Pay Information Full-Time Salary Range: $45649 - $73038 Please note: This range is based on our market pay structures. However, individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At BAE Systems, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 20 hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance. We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance. Our leave programs include paid time off, paid holidays, as well as other types of leave, including paid parental, military, bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Other incentives may be available based on position level and/or job specifics. Electronic Assembler II First Shift 125269BR EEO Career Site Equal Opportunity Employer. Minorities . females . veterans . individuals with disabilities . sexual orientation . gender identity . gender expression

SUPPLY CHAIN SPECIALIST www.versa-valves.com Are you an experienced, passionate pioneer in supply chain sourcing and procurement? Do you like the ability to share new ideas with your colleagues - without the extensive demands of travel? If so, consider an opportunity with VERSA. This is a challenging opportunity with a global pneumatic valve manufacturing company as a Supply Chain Specialist. We are seeking an analytical, organized, and motivated Supply Chain Specialist to work across Production Control, Purchasing, and Inventory Control. Using ERP systems, operational reports, and cross-functional collaboration, this position helps maintain material availability, establish production priorities, strengthen supplier performance, and improve supply-chain processes. Responsibilities Production Planning and Scheduling • Schedule and prioritize work for the Machine Shop and Assembly departments based on customer demand, production capacity, material availability, inventory levels, and delivery requirements., • Monitor production schedules and address material shortages, capacity constraints, and other issues that may affect customer delivery., • Communicate production priorities, schedule changes, and corrective actions to affected departments. Purchasing and Supplier and Commodity Management • Create, place, monitor, and expedite purchase orders., • Communicate with suppliers regarding pricing, delivery schedules, shortages, quality concerns, and order status., • Negotiate with suppliers to improve pricing, lead times, delivery performance, and purchasing terms., • Identify and qualify new suppliers in partnership with Quality, Engineering, and other departments., • Expand the capabilities of existing suppliers by qualifying them to manufacture additional parts., • Maintain accurate purchasing and supplier information in the ERP system and assist with supplier-performance monitoring. Reporting, Systems, and Process Improvement • Become proficient in the ERP applications and reporting tools used by the Supply Chain department., • Read, interpret, and act upon reports supporting production planning, purchasing, inventory management, and supplier performance., • Prepare recurring reports and performance metrics using Excel and ERP data., • Identify supply-chain trends, risks, shortages, and improvement opportunities., • Help develop and improve reports, workflows, data accuracy, and supply-chain processes., • Participate in special projects and continuous improvement initiatives., • Perform other related duties as necessary to support Supply Chain and manufacturing operations. Qualifications • Bachelor’s degree in Supply Chain Management or a related field., • One to three years of experience in supply chain or a related field., • Proficiency in Microsoft Excel, including the ability to organize, analyze, and present data., • Strong analytical, organizational, and problem-solving skills., • Ability to manage multiple priorities, exercise sound judgment, and meet deadlines., • Strong written and verbal communication skills., • Ability to work independently and collaborate effectively across departments., • Professionalism, attention to detail, and commitment to accuracy. Preferred Qualifications • Advanced Excel skills, including pivot tables, lookup functions, formulas, charts, and data analysis., • Experience in a manufacturing environment., • Experience with Epicor Kinetic or another manufacturing ERP system., • Familiarity with production scheduling, material requirements planning, purchasing, and inventory management., • Experience preparing operational reports or performance dashboards., • Familiarity with supplier sourcing, qualification, and performance management. Fluency in Chinese, a plus Benefits • Medical, dental, and vision coverage, • 401(k) retirement program, • Paid time off, • Tuition reimbursement, • Training and professional-development opportunities For more than 75 years, VERSA has built its reputation on quality, innovation, reliability, and the contributions of its employees. You will join a stable, team-oriented manufacturing company that offers meaningful responsibility, cross-functional experience, and opportunities to grow within Supply Chain.

Maintenance Mechanic - Electromechanical This is a long-term temp/contract position and could manifest into a “perm” role in the future with our client, an established and successful company in the chemical manufacturing spac e. We're looking for strong electromechanical skills, ideally within an industrial setting (manufacturing, warehouse, etc.), but any candidates who have the right technical experience will be considered. We’re looking for someone who is comfortable working the overnight shift Full Ti me. If you are qualified for the position and interested in pursuing it, please answer the questions posed at the end of the description and be sure to attach your resume. You will receive a reply in a timely fashion either via phone or email if your background is determined to be a good ma tch. Responsibili ties: Responsibil ities:- The Maintenance Technician will provide support to the plant primarily working with production machinery / equ ipment- Troubleshoot & repair equipment and machinery within the plant as needed and with u rgency- Follow preventive maintenance schedules on all equ ipment- Reconstruct equipment such as pumps, meters, valves and motors- Provide documentation of work as re quired- Ability to work in challenging enviro nments Required Expe rience:- electromechanical repair experience within an industrial envi ronment- Strong communication skills, verbal and written- Experience with motors, compressors, pumps, drive shafts, and basic machine repairs- Electrical troubleshooting exp erience The below experience is not required, but it's considered a 'plus':- PLC troubleshooting ex perience- Experience within process manufacturing such as chemical, food, pharmaceutical, cosmetic or other process manufacturing in dustries- Experience with 3 Pha se Power- Experience with ventilation systems- Experience with developing or following established plant PM schedules p referred IMPORTANT - IF INTERESTED AND QUALIFIED PLEASE ANSWER THE BELOW QUESTIONS 1. Are you comfortable working in a long-term temp / con tract role?2. What are your hourly pay requirements in order to accept a new position? (a ran ge is fine)3. Are you comfortable commuting to the South Hackensac k, NJ area?4. Are you open to working on the overn ight shift? Please send your resume and answers to the above q uestions to:sharper@hir e-source.comsharper(at)hire-so urce(dot)com Your resume will be held with strict confidence and will NEVER be forwarded to any of our clients without you r permission. If you are NOT interested or unqualified, please send us a referral. This is an immediate and urgent need for our valued client and therefore, we are offering a $1000.00 refer-a-friend fee to anyone who leads us to a candidate who is hired for this positi _ om/listings.html HireSource recruiters are dedicated to working with the finest technical professionals throughout the country. We know the market. We know the hiring managers. We have the knowledge, resources, and contacts to make your search more complete and efficient. Whether you are looking for more opportunity, a shorter commute, better benefits, or a higher salary, we're the best chance there is to uncovering that position you never even kn ew was available.

Press Brake Operator | Pembroke, NH | Global Food Processing Equipment Manufacturer This Jobot Job is hosted by: Andrew Kraig Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $20 - $30 per hour A bit about us: Founded over seven decades ago and based in Pembroke, NH, with other offices and facilities worldwide, we are a global leader in designing and manufacturing industrial food processing and packaging equipment. We build customized production lines (from frying and baking systems to conveyors and inspection technology) that help major food brands produce safe, consistent, and high-quality products efficiently. Why join us? • Competitive Compensation: Excellent hourly pay (DOE), • 401(k), • Comprehensive Benefits: Medical, Dental, Vision, Life Insurance, • Generous PTO, Sick Time, Vacation, Paid Holidays & Your Birthday Off, • Stable Employer: Decades of steady growth with a strong backlog, • Consistent Day Shift: Typical hours 7:00am–3:30pm (shop 5:00am–5:30pm) Job Details Key Responsibilities: • Set up and operate CNC press brake machines to bend, form, or punch metals, • Interpret technical drawings, blueprints, and schematics to complete jobs accurately, • Select and install tooling, adjust machine settings, and ensure precision alignment, • Measure and inspect finished parts using calipers, micrometers, and other tools, • Perform rework or fitting adjustments on pieces that fail inspection, • Handle and move materials safely, occasionally lifting up to 70 lbs, • Maintain clean, safe, and organized work area in accordance with safety standards You should have most of the following: • High School Diploma or GED required, • Minimum 1–2 years of experience operating a press brake or similar CNC machinery, • Strong ability to read and interpret blueprints and technical drawings, • Hands-on experience using measuring tools such as calipers and micrometers, • Physical ability to stand for long periods and lift up to 70 lbs, • Experience in sheet metal, food processing, or sanitary manufacturing industries preferred, • Proven ability to work independently while maintaining quality and accuracy Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description Pay: Starting from $18.00 per hour Job description: A self adhesive paper manufacturer needs a slitting operator helper to support the operator who slits the master rolls to the customer requested sizes. Strong work ethics and being a team player are important. Primary Responsibilities: • Prepare the machine for slitting and getting the material ready to be packed., • Put the master roll to the machine, • Release the rolls from machine and palletize it., • Responsible to follow safety procedures, • Must exhibit knowledge and competency of quality and manufacturing process requirements., • Forklift experience desired., • Work authorization is mandatory.Job Types: Temporary, Contract, Part-time, Full-time Benefits: • 401(k)Schedule:, • 8 hour shift, • Day shift, • Monday to FridaySupplemental Pay:, • Bonus payEducation:, • High school or equivalent (Preferred)Experience:, • Warehouse: 1 year (Preferred)Work Location: In person

Job Description QC / Packaging Operator – 2nd Shift $25.00/Hour | Monday–Friday | 3:15 PM–11:30 PM | Temp-to-Hire Location: Carlstadt, NJ Job Description We are currently hiring an experienced QC / Packaging Operator for our client, a manufacturing company located in Carlstadt, NJ. The QC / Packaging Operator will be responsible for performing final quality checks and packaging finished wood doors prior to shipment. The right candidate will have strong attention to detail, experience operating packaging equipment, and the ability to work efficiently in a fast-paced production environment. Responsibilities • Operate the plastic/bubble wrap packaging machine to protect finished doors., • Read and interpret job tickets and production paperwork., • Perform final quality inspections for finish, dimensions, and defects., • Verify product count, sizing, and order accuracy., • Identify and report defective or non-conforming products before packaging., • Label and stage packaged doors for shipment., • Monitor packaging materials and notify the Supervisor when supplies are low., • Maintain a clean, organized, and safe work area., • Follow all company safety and quality procedures., • Maintain production pace and meet shipping requirements. Requirements • 3+ years of experience operating a plastic/bubble wrap packaging machine required., • Manufacturing or production experience preferred., • Ability to read and understand job tickets and production paperwork., • Strong attention to detail and quality-control skills., • Basic math skills for measurements and counting., • Ability to work in a fast-paced production environment., • Reliable attendance and punctuality., • Ability to work well independently and as part of a team. Physical Requirements • Ability to stand for extended periods., • Ability to lift and move finished doors up to 75 lbs. with assistance as needed., • Ability to bend, reach, and use hands and arms repetitively., • Ability to safely perform the physical requirements of a manufacturing environment.

Company Description Granite Countertops and Cabinets is a specialized provider of custom stone surfaces and cabinetry for residential and commercial projects. The company focuses on precision craftsmanship, high-quality materials, and reliable installation services to deliver durable and visually appealing results. Team members collaborate closely to meet client specifications and project timelines, working with modern fabrication tools and equipment. The work environment emphasizes safety, attention to detail, and consistent quality in every job. \n Role Description This is a full-time, on-site CNC Operator/Programmer role based in Hawthorne, NJ. The CNC Operator/Programmer will set up, operate, and maintain CNC machinery used to cut, shape, and finish granite and other countertop materials. Daily tasks include programming CNC machines based on design specifications, loading materials, monitoring machining processes, and adjusting settings to ensure accurate dimensions and smooth finishes. The role involves inspecting finished pieces for quality, performing basic machine maintenance, and following safety procedures and shop guidelines. The individual will work closely with fabrication and installation teams to ensure that parts meet project requirements and are ready on schedule. \n Qualifications \n \n\n • Strong skills in Machine Operation and Machinery handling, with experience operating CNC equipment in a fabrication or manufacturing environment.\n, • Hands-on experience in Machining and Milling, including reading and interpreting technical drawings or CAD files to program CNC machines.\n, • Knowledge of Quality Control practices, including measuring components, checking tolerances, and documenting inspection results.\n, • Ability to work safely with stone and related materials, including proper use of PPE and adherence to shop safety protocols.\n, • Basic mechanical aptitude for troubleshooting minor machine issues and performing routine maintenance.\n, • Effective communication and teamwork skills, with the ability to follow instructions and coordinate with fabrication and installation staff.\n, • Prior experience in countertop fabrication, cabinetry, or related trades is preferred.\n, • High school diploma or equivalent; technical or vocational training in CNC machining or manufacturing is a plus.\n

Chefler Foods / Mike’s Amazing \n Saddle Brook, NJ \n Full-Time — On-Site \n \n Chefler Foods is seeking a hands-on EHS Specialist who enjoys working directly with employees, supervisors, and operational teams. \n \n This role is designed for someone who wants to be present in production and warehouse areas, identify hazards, coach safe behaviors, support training, and help prevent incidents before they happen. \n \n WHAT YOU’LL DO \n • Maintain a strong and consistent Safety presence throughout production, warehouse, shipping, and receiving areas \n • Conduct routine Safety walks, observations, inspections, and follow-up reviews \n • Identify unsafe acts, unsafe conditions, and potential workplace hazards, and address serious concerns promptly \n • Coach employees and supervisors on safe work practices and reinforce established Safety expectations \n • Monitor PPE compliance and support corrective action when repeated or serious violations occur \n • Support forklift and powered industrial truck Safety, including observations, retraining, and operator evaluations \n • Respond to injuries, first-aid cases, near misses, property damage events, and other Safety incidents \n • Assist with incident investigations, employee interviews, photographs, video review, root-cause analysis, and corrective-action tracking \n • Support new-hire Safety orientation, toolbox talks, refresher training, and other floor-based training activities \n • Assist with programs involving Lockout/Tagout, machine guarding, PPE, Hazard Communication, ergonomics, material handling, and emergency response \n • Participate in emergency drills and facility inspections and support Safety Champions and First Responders \n • Maintain accurate Safety inspection, training, observation, and corrective-action records \n \n WHAT WE’RE LOOKING FOR \n We want someone who is comfortable walking onto the floor, engaging employees, asking questions, identifying risk, speaking up when something does not look right, and who is motivated by preventing injuries and strengthening workplace Safety. \n • Approachable and comfortable working directly with employees \n • Confident addressing unsafe behaviors and conditions \n • Observant, detail-oriented, and proactive \n • Strong communicator with employees, supervisors, and management \n • Organized and capable of maintaining accurate documentation \n • Able to work independently while supporting a larger operational team \n \n QUALIFICATIONS \n • High school diploma or GED required \n • One to three years of experience in Safety, EHS, manufacturing, warehousing, food production, distribution, or a related environment preferred \n • Working knowledge of OSHA workplace Safety requirements preferred \n • Experience conducting workplace inspections or Safety training preferred \n • Strong written and verbal communication skills \n \n PREFERRED QUALIFICATIONS \n • OSHA 10-Hour or OSHA 30-Hour certification \n • Forklift Trainer or Train-the-Trainer certification \n • CPR, First Aid, and AED certification \n • Experience with workplace incident investigations \n • Familiarity with Lockout/Tagout, machine guarding, PPE, Hazard Communication, and powered industrial truck requirements \n • Bilingual English/Spanish communication skills are highly desirable \n \n WORK ENVIRONMENT \n This is primarily a floor-based Safety position, not a desk-based role. \n Candidates should be comfortable standing and walking for extended periods, working around forklifts and manufacturing equipment, wearing required PPE, and responding to Safety concerns throughout the facility. \n \n Schedule flexibility may occasionally be required to support multiple shifts, training, investigations, or operational needs. \n \n BENEFITS \n • Health insurance \n • Dental insurance \n • Vision insurance \n • 401(k) retirement plan \n \n JOIN THE CHEFLER FOODS SAFETY TEAM \n If you are looking for an opportunity where you can be visible, involved, and make a direct impact on employee Safety every day, we would like to hear from you. \n\n • Chefler Foods is an Equal Opportunity Employer.\n

Singer Equipment Company is not just a seller of food equipment – we cultivate partnerships and amplify success. Singer isn't just a place to work; it's a place to thrive. We empower our employees, fostering an environment where they can grow professionally and contribute to something larger than themselves. We are the proud, 3-time recipient of the Foodservice and Supplies Dealer of the Year Award. Our commitment to our customers has earned us an unbeatable reputation within our industry. This is your opportunity to join a winning team! At Singer Equipment Company, we value each and every one of our dedicated staff and therefore are pleased to offer a competitive starting wage, a comprehensive benefits package including: medical, dental, vision, short term and long-term disability, 401K with company match, group life insurance, flexible spending, paid time off, and paid holidays. Why You'll Love Working Here: • Make a Difference: Work with enthusiasm and integrity while ensuring communication, coordination and collaboration., • Collaborative Spirit: Be part of a supportive and dynamic team environment., • Growth Opportunities: Develop your skills and advance your career in a dynamic industry., • Competitive Compensation & Benefits: Enjoy a rewarding package that reflects your contributions. We are seeking a detail-oriented and proactive Inventory Control Associate to join our warehouse team. The ideal candidate will be responsible for maintaining accurate inventory records, overseeing inventory levels, and ensuring efficient utilization of warehouse space. This role requires strong organizational skills, keen attention to detail, and the ability to work effectively in a fast-paced environment. • Conduct daily cycle counts to ensure accuracy and reconcile discrepancies., • Communicate with individuals from other departments on product quality issues and other requests, as needed., • Implement and maintain inventory management procedures and protocols., • Utilize inventory management software to track and update inventory records in real-time., • Analyze data to identify inventory discrepancies, aging stock, and opportunities for process improvements., • Maintain organized storage areas and ensure goods are stored efficiently to optimize warehouse space., • Generate reports on inventory levels, adjustments, and variances for management review., • Ensure compliance with safety regulations and maintain a clean and orderly warehouse environment., • High school diploma or equivalent required; Associate degree in logistics, supply chain management, or a related field preferred., • Previous experience in inventory control or a related field is highly desirable., • Proven experience as an Inventory Control Associate or similar role, preferably in a warehouse setting., • Proficiency in inventory management software and MS Office applications, particularly Excel., • Strong analytical skills and the ability to interpret data and trends., • Excellent organizational and time management skills with the ability to prioritize tasks., • Attention to detail and accuracy in data entry and record keeping., • Effective communication skills and the ability to collaborate with cross-functional teams., • Knowledge of warehouse operations and inventory control best practices., • Ability to work independently and handle multiple tasks simultaneously. Working Conditions: • This position typically operates in a warehouse environment and does include the use of a cherry picker, often going high into the air on the machine., • May require lifting and carrying items weighing up to 50 pounds., • Regular exposure to moving mechanical parts and loud noise levels. Candidates are encouraged to apply even if they do not meet all listed requirements. We recognize that skills and potential can take many forms, and we value diverse experiences that may not align perfectly with traditional qualifications. Are you ready to take your career to the next level? Apply today and let's cook up some success! Singer Equipment Company is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, veteran status, or any other protected status under applicable law.

Job Description Providing Engineering and Manufacturing solutions since 1955, Triangle specializes in the precision engineering and manufacturing of highly complex, tight-tolerance machined parts and assemblies. Triangle continues to thrive in more than 107,000 square feet over four state-of-the-art facilities at our Upper Saddle River, NJ campus. As a family-owned company, we foster a workplace that supports customer-driven, growth-oriented values and has a passion for surpassing expectations. We invest in our associates and create a supportive, team-based environment for learning, innovation, and advancement. Triangle is not only a family-run business; it's also a place where our associates feel like family. We believe in the same values and bring the same passion to our work each day to make a difference in people's lives. SUMMARY Responsible for meeting customer requirements of on-time delivery and quality through the effective operation of conventional and/or CNC equipment while adhering to the Quality Management System, all applicable regulations and company standards, and Lean Manufacturing Principles, and performing the following duties. 2nd Shift - 3:15 PM to 11:45 PM ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Understands job specifications and blueprints, as instructed. Independently operates conventional and CNC machining centers. Tests and inspects products during the manufacturing operation to determine if items meet specifications, complying with established standards and methods for inspection, testing, evaluation, and calibration. Understands and follows all written instructions as per tool sheets, inspection plans, etc., and accurately completes all required documentation at the time of the task, as well as provides required data for established metrics in the area. Examines defective machinery to determine problems and reports the need for machine repairs. Inspects and measures tools and equipment for defects and wear, and corrects damage. Recommends process improvements to TC or management. Completes all required documentation on a timely basis. Understands and complies with company policy, safety guidelines, quality system procedures, and housekeeping standards. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience High school diploma or general education degree (GED) and 1-2 years CNC machinist experience. Mechanical inspection background. Language Skills Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to update job-related documentation. Ability to effectively present information one-on-one to other employees of the organization. Mathematical Skills Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Triangle does not sponsor for employment visa status. Triangle is proud to be an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. Powered by JazzHR Kg4CF4QVfB

Job Description Our Client in Fairfield NJ is seeking a skilled Tool & Die Maker to join their team! Schedule: Monday - Friday (Full time flexible hrs) Pay: DOE RESPONSIBILITIES: • Construct, alter, and repair a variety of tools, dies, jigs, fixtures, and gauges to very close tolerance., • Develops strategies for fabricating die components using the most efficient machining methodology., • Demonstrated ability for using shop mathematics, handbook of geometric and trigonometric formulas., • Ability to work from drawings and sketches., • Ability to use all types of precision measuring instruments., • Thorough knowledge of machine shop practices, principles of mechanics, machine shop operations, and the working generalities of material, • Previous experience working with Progressive or Compound Dies REQUIREMENTS: • HS diploma required. Benefits Include: Medical, Dental and Vision, 401 (k) with company match, Holiday, Vacation and Sick Time, Health Savings Accounts (HAS), Short Term Disability, and more! \nCompany Description PrideStaff is a 16 time Best of Staffing Award Winning full-service staffing company. PrideStaff is a 16 time Best of Staffing Award Winning full-service staffing company.

Job Description Job Title: CNC Machinist / Machine Operator (Full-Time or Part-Time) Location: Carlstadt, NJ Schedule: 7:00 AM – 4:30 PM (Part-time hours flexible | Optional OT available) Pay: Competitive (Commensurate with experience) About Us We are a high-volume, precision machine job shop in Carlstadt, NJ. We take pride in quality craftsmanship, a clean work environment, and supporting our team with steady work and strong support. Whether you're looking for full-time stability, a flexible part-time schedule, or are a retired machinist wanting to keep your skills sharp, we’d love to have you on board. What You’ll Do • Machine Setup & Operation: Perform setups and operate precision equipment, including Mazak CNC 2-axis lathes, HAAS VF2, and Bridgeport Torq-Cut 22 3-axis Machining Centers., • Blueprint Interpretation: Read, analyze, and execute setups directly from technical blueprints and engineering drawings., • Quality Assurance: Conduct first-piece and in-process inspections using micrometers, calipers, and gauges, documenting measurements accurately., • (Bonus) CNC programming skills are a plus, though not required! What We’re Looking For • Experience: 3+ years in a professional machine shop environment., • Work Ethic: Reliable, punctual, and attentive to precision detail., • Flexibility: Open to full-time or part-time schedules (retirees are highly welcome to apply!). Why Join Us? • Flexible full-time or part-time arrangements., • Consistent day shifts with optional overtime opportunities., • A respectful, team-oriented shop floor.