Trabajos machine en Poughkeepsie, New YorkCrear alertas

Job Description BASIC FUNCTIONS AND RESPONSIBILITIES: Repair and maintain residential and commercial buildings and their components and equipment. ESSENTIAL JOB FUNCTIONS: -Perform a variety of work in the maintenance, repair, and preventative maintenance within the hotel and on the property including carpentry, electrical, plumbing, painting and appliance repair in an effort to meet and exceed established standards. -Conduct corrective service and repair/restoration works where and when necessary. -Perform daily technical inspection rounds and checks on the proper functioning of equipment and installations. -Carry out inspection of public areas on a daily basis in case of problems arising unexpectedly. -Use hand tools, power tools, and general equipment in a correct and safe manner such as but not limited to radial arm saw, jig saw, circular saw, table saw, router, sewing machine, multimeter, pipe threader, flaring tool, blow torch, sewer snake, powered drill, belt sander, palm sander, grinder, paint shaker, paint sprayer, personal lift, ladder, steamer, scaffold, safety belt, harness, etc. -Maintain a written and/or computerized record of mechanical system status as needed. -Respond promptly to emergency calls involving all Mohonk Mountain House systems and components, as well as outbuildings. -Highlight any other matters that need future upgrading work. -Assist in HVAC unit repair projects. -Assist in remodeling and construction of new projects as may be required. -Perform Pool/Spa maintenance. -Keep all mechanical areas in a neat and orderly condition. -Manage an inventory record of parts and supplies, tools and equipment. -Diagnose mechanical problems to identify the root cause of problems. Then develop and implement effective solutions to problems. -Work together with Operations Managers and communicate any aspect of operations which will involve the maintenance department. -Communicate results of completed tasks and work in progress clearly to appropriate departments. -Demonstrate technical knowledge and experience in residential and commercial heating systems (geothermal, hydronic, electric and steam), electrical wiring (including electrical theory and circuit design), kitchen appliances, HVAC Systems, fire sprinkler and other fire suppression systems, and commercial and institutional laundry equipment. -Demonstrate technical knowledge and experience in motors and pumps, electromechanical assemblies and controls, refrigeration principles, high pressure boilers and pools. -Demonstrate technical knowledge and experience in fasteners and fastening systems, door/window/locks and screens, and application of paints/stains and other protective coatings. -Demonstrate excellent time management skills and work productively and efficiently with or without supervision when performing routine tasks. -Adhere to all OSHA guidelines and standards including but not limited to lock out-tag out, confined space, hot-work, SDS, Personal Protective Equipment, etc. -Operate both automatic and manual transmission vehicles safely while driving and/or parking in compliance with Mohonk Mountain House Traffic Rules and Regulations. -Monitor and evaluate work-related conditions to determine compliance with prescribed operating, safety regulations and Department guidelines. -Inform supervisor of hazardous situations, emergencies or threats to the security of guests, employees or hotel assets. -Act calmly and effectively in emergency situations. -Demonstrate proficiency with Windows-based operating systems and use software including MS Word, MS Outlook. -Perform basic mathematical functions such as addition, subtraction, multiplication, and division. -Read and comprehend technical manuals, diagrams, and blue prints. -Learn and utilize new methods, materials, procedures, and systems. -Inspect work and work areas by touch, sight, sound and smell for conformance to prescribed standards. -Speak, read and write the English language and communicate in a clear and congenial manner, with our guests, visitors and employees. Hear verbal instructions, directions and warnings. -Reach with hands and arms, bend, kneel, stoop, twist and flex arms, walk up and down stairs/inclines, sit, climb up/down ladders or stand for up to 5 hours at a time. -Lift up to 75 pounds from ground level to shoulder and carry a distance of up to 50 feet with/ without assistance. Walk up to 15 miles per day. -Perform work duties up to 80 feet above the ground. -Maneuver carts or dollies safely with loads up to 200 pounds up and down stairs, elevators, through passageways or outdoors up to 750 feet. -Pass through and work in tight, enclosed, and confined spaces. -Drive automatic and standard transmission vehicles. -See close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. -Carry a two-way portable radio and earpiece to communicate and enable immediate response to emergency situations. -Work under stress from contact with public, demanding deadlines and changing priorities and conditions. -Work outdoors and exposed to natural elements. -Adhere to Mohonk Mountain House’s Dress and Grooming Standards; presenting a neat, clean and well-groomed appearance and maintaining a positive, professional image to our customers. -Learn and successfully demonstrate the Mohonk Mountain House Service Steps with Service Strategies with guests and staff. -Learn and retain knowledge of historical facts and information about Mohonk Mountain House. -Maintain a flexible work schedule including days/nights, overnights, weekdays/weekends, holidays, and during peak periods of business. -Work additional hours beyond regularly scheduled work day (evenings and weekends) as necessary. -Work extended hours or on short notice in emergency situations. -Develop and maintain positive working relationships with other staff. -Answer questions with accurate information and demonstrate a friendly and helpful personality by smiling, eye contact, initiating conversation and engaging with others. QUALIFICATIONS: -Valid Driver’s License and at least 21 years of age, or 20 years of age with at least two years of licensed driving experience. -Technical knowledge and experience in residential and commercial heating systems (geothermal, hydronic, electric and steam), electrical wiring (including electrical theory and circuit design), kitchen appliances, HVAC Systems, fire sprinkler and other fire suppression systems, and commercial and institutional laundry equipment. -Technical knowledge and experience in motors and pumps, electromechanical assemblies and controls, refrigeration principles, high pressure boilers and pools. -Technical knowledge and experience in fasteners and fastening systems, door/window/locks and screens, and application of paints/stains and other protective coatings. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Job DescriptionOverview We are seeking a skilled and dedicated Industrial Maintenance Technician to join our team in Poughkeepsie, NY. In this role, you will play a crucial part in ensuring the smooth operation of our manufacturing facility. Your expertise in maintenance, troubleshooting, and repair will help us maintain high productivity and safety standards. If you are passionate about industrial maintenance and thrive in a dynamic environment, we want to hear from you! Responsibilities • Perform routine and preventive maintenance on machinery and equipment., • Develop and implement preventive maintenance plans to minimize downtime., • Troubleshoot and repair plumbing, electrical, and mechanical issues., • Conduct machine safety inspections and ensure compliance with safety regulations., • Set up and operate various machines for production runs, including labeling systems and packaging machines., • Maintain and repair heavy equipment, including forklifts and conveyor systems., • Utilize manual machining skills for custom repairs and modifications., • Collaborate with team members to improve processes and equipment reliability., • Document maintenance activities and maintain accurate records of repairs and inspections. Qualifications, • Proven experience as an Industrial Maintenance Technician or similar role in a manufacturing environment., • Strong skills in plumbing, electrical troubleshooting, and mechanical troubleshooting., • Experience with heavy equipment repair and facilities maintenance., • Familiarity with machine safety inspections and setups for production runs., • Hands-on experience with labeling systems, packaging machines, liquid fill pumps, palletizers, conveyor systems, and servo motors., • Ability to meet physical requirements of the job, including lifting and standing for extended periods., • Excellent communication skills and the ability to work collaboratively with team members., • Welding experience is a plus., • Plumbing, • Creating Preventive Maintenance Plans, • Industrial and Manufacturing Engineering, • Heavy Equipment Repair, • Equipment Troubleshooting, • Facilities Maintenance Experience, • Electrical Troubleshooting Skills, • Mechanical Troubleshooting Skills, • Electrical Troubleshooting, • Welding Setups for Production, • Machine Safety Inspections, • Machine Setups for Production Runs, • Manual Machining Skills, • Meets Physical Requirements, • Excellent Communication Skills, • Labeling Systems, • Packaging Machines, • Liquid Fill Pumps and Equipment, • Palletizer, • Conveyor Systems, • Servo Motors, • Forklifts

Job Description BASIC FUNCTIONS AND RESPONSIBILITIES: Repair and maintain residential and commercial buildings and their components and equipment. ESSENTIAL JOB FUNCTIONS: -Perform a variety of work in the maintenance, repair, and preventative maintenance within the hotel and on the property including carpentry, electrical, plumbing, painting and appliance repair in an effort to meet and exceed established standards. -Conduct corrective service and repair/restoration works where and when necessary. -Perform daily technical inspection rounds and checks on the proper functioning of equipment and installations. -Carry out inspection of public areas on a daily basis in case of problems arising unexpectedly. -Use hand tools, power tools, and general equipment in a correct and safe manner such as but not limited to radial arm saw, jig saw, circular saw, table saw, router, sewing machine, multimeter, pipe threader, flaring tool, blow torch, sewer snake, powered drill, belt sander, palm sander, grinder, paint shaker, paint sprayer, personal lift, ladder, steamer, scaffold, safety belt, harness, etc. -Maintain a written and/or computerized record of mechanical system status as needed. -Respond promptly to emergency calls involving all Mohonk Mountain House systems and components, as well as outbuildings. -Highlight any other matters that need future upgrading work. -Assist in HVAC unit repair projects. -Assist in remodeling and construction of new projects as may be required. -Perform Pool/Spa maintenance. -Keep all mechanical areas in a neat and orderly condition. -Manage an inventory record of parts and supplies, tools and equipment. -Diagnose mechanical problems to identify the root cause of problems. Then develop and implement effective solutions to problems. -Work together with Operations Managers and communicate any aspect of operations which will involve the maintenance department. -Communicate results of completed tasks and work in progress clearly to appropriate departments. -Demonstrate technical knowledge and experience in residential and commercial heating systems (geothermal, hydronic, electric and steam), electrical wiring (including electrical theory and circuit design), kitchen appliances, HVAC Systems, fire sprinkler and other fire suppression systems, and commercial and institutional laundry equipment. -Demonstrate technical knowledge and experience in motors and pumps, electromechanical assemblies and controls, refrigeration principles, high pressure boilers and pools. -Demonstrate technical knowledge and experience in fasteners and fastening systems, door/window/locks and screens, and application of paints/stains and other protective coatings. -Demonstrate excellent time management skills and work productively and efficiently with or without supervision when performing routine tasks. -Adhere to all OSHA guidelines and standards including but not limited to lock out-tag out, confined space, hot-work, SDS, Personal Protective Equipment, etc. -Operate both automatic and manual transmission vehicles safely while driving and/or parking in compliance with Mohonk Mountain House Traffic Rules and Regulations. -Monitor and evaluate work-related conditions to determine compliance with prescribed operating, safety regulations and Department guidelines. -Inform supervisor of hazardous situations, emergencies or threats to the security of guests, employees or hotel assets. -Act calmly and effectively in emergency situations. -Demonstrate proficiency with Windows-based operating systems and use software including MS Word, MS Outlook. -Perform basic mathematical functions such as addition, subtraction, multiplication, and division. -Read and comprehend technical manuals, diagrams, and blue prints. -Learn and utilize new methods, materials, procedures, and systems. -Inspect work and work areas by touch, sight, sound and smell for conformance to prescribed standards. -Speak, read and write the English language and communicate in a clear and congenial manner, with our guests, visitors and employees. Hear verbal instructions, directions and warnings. -Reach with hands and arms, bend, kneel, stoop, twist and flex arms, walk up and down stairs/inclines, sit, climb up/down ladders or stand for up to 5 hours at a time. -Lift up to 75 pounds from ground level to shoulder and carry a distance of up to 50 feet with/ without assistance. Walk up to 15 miles per day. -Perform work duties up to 80 feet above the ground. -Maneuver carts or dollies safely with loads up to 200 pounds up and down stairs, elevators, through passageways or outdoors up to 750 feet. -Pass through and work in tight, enclosed, and confined spaces. -See close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. -Carry a two-way portable radio and earpiece to communicate and enable immediate response to emergency situations. -Drive automatic and standard transmission vehicles. -Work under stress from contact with public, demanding deadlines and changing priorities and conditions. -Work outdoors and exposed to natural elements. -Adhere to Mohonk Mountain House’s Dress and Grooming Standards; presenting a neat, clean and well-groomed appearance and maintaining a positive, professional image to our customers. -Learn and successfully demonstrate the Mohonk Mountain House Service Steps with Service Strategies with guests and staff. -Learn and retain knowledge of historical facts and information about Mohonk Mountain House. -Maintain a flexible work schedule including days/nights, weekdays/weekends, holidays, and during peak periods of business. -Work additional hours beyond regularly scheduled work day (evenings and weekends) as necessary. -Work extended hours or on short notice in emergency situations. -Develop and maintain positive working relationships with other staff. -Answer questions with accurate information and demonstrate a friendly and helpful personality by smiling, eye contact, initiating conversation and engaging with others. QUALIFICATIONS: -Valid Driver’s License and at least 21 years of age, or 20 years of age with at least two years of licensed driving experience. -Technical knowledge and experience in residential and commercial heating systems (geothermal, hydronic, electric and steam), electrical wiring (including electrical theory and circuit design), kitchen appliances, HVAC Systems, fire sprinkler and other fire suppression systems, and commercial and institutional laundry equipment. -Technical knowledge and experience in motors and pumps, electromechanical assemblies and controls, refrigeration principles, high pressure boilers and pools. -Technical knowledge and experience in fasteners and fastening systems, door/window/locks and screens, and application of paints/stains and other protective coatings. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Job Description Small local business is looking for a general laborer who can work independently.. Excellent opportunity for the right person in an industrial machine shop assisting in the service and production of heavy machine parts. Duties include, but are not limited to: Helping maintain Equipment and Custom Parts. Assist during deliveries by loading and unloading of shipments. Heavy Lifting Required. Must be able to lift at least 75lbs. Carry out heavy cleaning tasks and special projects. Clean, stock and supply designated facility areas. Follow all health and safety regulations. Skills Needed: Ability to follow instruction. Ability to use a forklift a plus, but will train. Mechanical Knowledge a plus. Ability to walk, bend, push, pull and lift repetitively during working hours. Excellent communication skills with the ability to work as a team. Must be self-motivated with the ability to identify and complete needed tasks without direct supervision. Current Valid Driver's License Required First Shift, Full Time or Part Time Positions available-Daytime M-F, 7:30-4:00. Possible weekends. Starting rate is $23.00 per hour. Overtime possible during busy season. 401K benefits available after minimum hour requirement met. Must send Resume and/or Cover letter via website. Furlani Machine Shop Highland, NY Company DescriptionLocal, well established machine shop in business for 20+ years. Large 54,000 square foot facility offering a complete welding and fabrication shop specializing in the Mining and Aggregate as well as Heavy Duty Marine machine part service, repair and fabrication.Local, well established machine shop in business for 20+ years. Large 54,000 square foot facility offering a complete welding and fabrication shop specializing in the Mining and Aggregate as well as Heavy Duty Marine machine part service, repair and fabrication.

Job Description Shape precision. Build quality. Own your day. Picture starting your morning with a review of shop drawings, then moving seamlessly from cutting PVC/CPVC on a saw and router to setting up a CNC for a short run. After lunch, you’ll switch gears—assemble components, spot-check quality with calipers and micrometers, and help the team hit a production milestone before closing out accurate production records. That’s a typical day for our PVC/CPVC Fabrication & CNC Assembly Technician. Location, Schedule & Pay • Title: Manufacturing Technician, • Location: PoughKeepsie, NY - SSI Aeration (4 Tucker Dr Poughkeepsie, NY 12603), • Shift: 1st Shift, Monday - Friday (8am - 5pm), • Operate saws, drills, routers, and related tools to cut, drill, and assemble PVC pipe., • Assemble parts manually and via semi-automatic/automatic equipment, including CNC and plastic injection molding machines., • Interpret shop drawings, blueprints, and work orders to complete builds., • Measure, cut, fit, and assemble PVC & CPVC components to specification., • Load and unload shipments for the factory and production floor., • Set up machines and perform routine maintenance on fabrication equipment., • Inspect finished work to verify it meets company quality standards., • Maintain accurate production records; report material usage and issues., • Keep the work area safe, clean, and organized while following all safety protocols., • Collaborate with teammates to meet production schedules and deadlines., • Assist with inventory management and purchasing., • Pick and pack parts orders when needed. Minimum Qualifications, • High School Diploma or GED, • 1+ year in manufacturing, fabrication, or assembly Core Strengths, • Comfort reading drawings and using a computer., • Strong time management with keen attention to detail., • Good problem-solving skills and commitment to quality workmanship., • Basic familiarity with hand tools, power tools, and machine operation., • Clear communicator and dependable team contributor., • Adaptable and eager to learn as production priorities evolve. Preferred Background, • Pipe fabrication, plumbing, or plastics manufacturing experience., • Knowledge of PVC solvent welding and mechanical fittings. The pay range takes into account a wide range of factors that are considered in making compensation decisions including, but not limited to, skills; experience and training; licensure and certifications; and other business and organizational needs. The disclosed pay range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At Ingersoll Rand, it is not typical for an individual to be hired at or near the top of the pay range for their role and compensation decisions are dependent on the facts and circumstances of each case. Benefits & Ownership Culture We embrace personal ownership—for our company, communities, environment, and individual well-being. Our benefits are designed so you can perform at your best at work and beyond, including health care (medical with prescription, dental, vision), wellness programs, life insurance, a strong 401(k), paid time off, and an employee stock grant, among other offerings. Proficiencies That Help You Succeed • Equipment Troubleshooting; Mechanical Troubleshooting Skills, • CNC Tooling; CNC Programming; Troubleshooting CNC Machines, • CNC Machine Repair; CNC Machine Installation, • Machine Building/Assembling; Mechanical Assembly Skills, • Manual Machining Skills; Tool/Die/Mold Setup & Repair Skills, • Blueprint Reading; Excellent Communication; Basic Computer Skills, • Experience in a Manufacturing Environment; High School / GED Equipment You May Use, • CNC Mill (3-4 axis VMC), CNC Mill (5+ axis VMC), • Horizontal Machining Center (3-4 axis) and (5+ axis), • CNC Lathe (2-4 axis) and CNC Lathe (5+ axis), CNC Swiss Lathe, • CNC Grinder, Manual Grinder, Manual Lathe, Manual Vertical Mill, • CNC Automation Solutions

Job DescriptionCNC Machinist – Direct Hire Location: Poughkeepsie, NY Shift: 1st or 2nd Shift Available Our client, a well-established global manufacturer, is expanding and seeking a skilled CNC Machinist to join their team. This is a great opportunity to grow your career in a stable, fast-paced environment. Experience with CNC multi-axis equipment is required, and editing capabilities are a strong plus. CNC Machinist Qualifications: • High school diploma or GED, • Mastercam and SolidWorks proficiency or certification preferred, • Strong communication and interpersonal skills, • Proven problem-solving abilityCNC Machinist Responsibilities:, • Operate both manual and CNC machinery, • Perform machine setups for both legacy and new production components, • Execute offsets and tool changes to maintain production efficiency, • Conduct visual and dimensional inspections using tools such as microscopes, micrometers, calipers, pin gages, thread gages, comparators, micro-hite, CMMs, and vision systems, • Complete routine preventive maintenance on equipment, • Troubleshoot complex machine or process issues, • Accurately document inspection results and maintain quality standards, • Ensure material control, identification, and traceability are upheld throughout the manufacturing processIf you're looking to join a company that values precision, teamwork, and continuous improvement, this could be the right move for you. Apply today to learn more. #Recruitment2025 #ZRCompany DescriptionEthan Allen Workforce Solutions offers job seekers and employers the most complete, leading-edge employment services in the Hudson Valley. Whether you are looking for employment opportunities, quality employees or off-site personnel services such as payroll, employee benefits or risk management, we are experts in meeting the needs of workers and companies across the Hudson Valley!Ethan Allen Workforce Solutions offers job seekers and employers the most complete, leading-edge employment services in the Hudson Valley.\r\n\r\nWhether you are looking for employment opportunities, quality employees or off-site personnel services such as payroll, employee benefits or risk management, we are experts in meeting the needs of workers and companies across the Hudson Valley!

Texas Roadhouse - 2323 South Road [Busser / Porter / Cleaning] As a Dishwasher at Texas Roadhouse, you'll: Operate the dish machine; Supervise proper rinse and wash temperatures; Change water, storing and using dish chemicals properly; Set up and organize the dish racks, and remove trash; Exhibit te

Job Description MD Imaging, a Rezolut partner, is seeking an MRI Technologist to join our team! Who is Rezolut? Rezolut is a national emerging platform of diagnostic medical imaging services. With focus on four key platforms, our vision is to provide topnotch patient care partnered with innovative technology — to achieve better health outcomes. We provide high-quality, cost-effective, fixed-site outpatient diagnostic imaging as well as mobile imaging and health services. In each of our regions, we are the best in radiology, offering all radiology services! Job Summary: Under general supervision and according to established policies and procedures, the MRI Technologist will perform all required diagnostic scanning procedures to produce consistent, high-quality examinations. Essential Functions of an MRI Technologist: • Performs all required diagnostic MRI exams in a timely manner., • Positions patients for exams, ensuring comfortable and accurate positioning., • Monitors the condition of patients in the department and assists the radiologist or other physicians in performing needed medical attention., • Interprets physician instructions and select software options and imaging parameters when adjusting an MRI machine, • Assures all exams include accurate clinical and demographic information and high quality, complete images, • Screens patients for any precautions or contraindications prior to them entering the magnetic field and thoroughly research all implants, devices, etc., • Possesses a skilled level and working knowledge of MRI scanning technology., • Communicates with radiologists and other healthcare providers about images and patient care., • Initiative to obtain additional scans, views, or extremely technical factors to provide maximum information for the radiologist to make an accurate diagnosis., • Maintain sensitivity to physical and psychological needs of patients, • ARRT/ ARMRIT Certification, • Prolonged periods of sitting at a desk and working on a computer., • Must be able to lift up to 15 pounds at times., • PTO for full-time employees, • 6 Observed Holidays, • Medical, Dental, Vision, Life and other voluntary insurances, • 401(k) Retirement Plan, • PRN, • Onsite

Job Description JOB TITLE: Cross Country Ski Trail Groomer/Snowmaker DEPARTMENT: Ski DATE: July 30, 2023 BASIC FUNCTIONS AND RESPONSIBILITIES: Assist the Ski Manager with meeting specific operational goals by performing general and specific snowmaking, ski trail and snow tube hill maintenance procedures. ESSENTIAL JOB FUNCTIONS: • Maintain safe, quality ski trails and snow tubing conditions for guests., • Promote Mohonk Mountain House’s unique cross-country skiing snowshoeing, and snow tubing experience while interacting with guests., • Organize and communicate to Ski Manager all information relating to guest needs and potential skiing and snow tubing condition problems or concerns., • Maintain safe and professional operation of grooming snowmobiles, grooming UTV, and grooming implements., • Interact cordially and professionally with all guests and co-workers., • Communicate clearly and effectively with the ski and activities staff and all other Mohonk Mountain House service staff., • Perform minor equipment maintenance “on-the-spot” to grooming equipment and snowmobiles so facility preparation may continue., • Perform trail and sign maintenance as needed., • Operate and monitor SMI Snow Guns powered by independent compressors, high pressure water, and high voltage electricity in a safe and effective manner., • Operate a snowmobile safely at speeds up to 20 m.p.h. on narrow paths and roads during daytime and nighttime hours; Maneuver a snowmobile out of a ditch., • Operate a UTV vehicle with track system., • Perform preventative and routine maintenance of machinery, pipe and valve systems, and hoses associated with snowmaking/grooming equipment., • Assist with attachment changes of the power tiller and tuber shaper devices for the snow groomer machine., • Use basic hand and power tools, such as but not limited to: ratchet, wrenches, screwdrivers, hand sledge, bow saw, winch, cable puller, tow strap, drill, impact drill, chainsaw, pump jack and battery powered grease gun., • Perform daily maintenance to the tube lanes, walk up lanes and ending zone of the tube hill operation along with safety fencing, cones, and signage., • Shovel/sweep deep heavy snow with shovel/broom and operate snow blowers., • Report equipment issues to supervisor or manager., • Inspect trail conditions and make recommendations for usage and maintenance., • Make ski trail recommendations to guests with safety and skier ability being the primary determining factors of each recommendation., • Demonstrate an outgoing and friendly personality., • Interact cordially and professionally with all guests and co-workers., • Communicate clearly and effectively with the ski and activities staff and all other Mohonk Mountain House service staff., • Work productively and efficiently with or without supervision when performing routine tasks., • Work in a manner that will not endanger self or others., • Inspect the work of others by touch, sight, sound and smell for conformance to prescribed standards., • Reach with hands and arms, bend, kneel, stoop, twist and flex arms, walk up and down stairs/inclines, sit, climb up/down ladders or stand for up to 5 hours at a time., • Lift up to 75 pounds from ground level to waist level and carry a distance of up to 100 feet with/ without assistance. Walk up to 5 miles per day. Reach areas as high as 8 feet from a standing position with use of a step ladder., • Walk in snow up to 3 feet deep., • Maintain a flexible work schedule including days/evenings, weekdays/weekends, holidays, as well as overnight shifts as needed and during peak periods of business., • Work outdoors and expose self to natural elements including rain, sleet, snow, wind, and weather extremes including below freezing temperatures., • Handle change, adversity, and pressure situations in a calm and levelheaded manner., • Analyze problems and develop and implement action plans to address problems., • Carry a two-way portable radio and earpiece to communicate and provide immediate response to emergency situations., • See close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus., • Speak, read and write the English language and communicate in a clear and congenial manner, with our guests, visitors and employees. Hear verbal instructions, directions and warnings., • Speak clearly and in front of groups of people, up to 15 people., • Listen well, communicate effectively and establish effective working relationships with other staff, management, vendors and guests that have a variety of cultural backgrounds and values., • Adhere to Mohonk Mountain House’s Dress and Grooming Standards; presenting a neat, clean and well-groomed appearance and maintaining a positive, professional image to our customers., • Learn and successfully demonstrate the Mohonk Mountain House Service Steps with Service Strategies with guests and staff., • Learn and retain knowledge of historical facts and information about Mohonk Mountain House., • Maintain a flexible work schedule including days/evenings, weekdays/weekends, holidays, QUALIFICATIONS: • Valid Driver’s License and at least 21 years of age, or 20 years of age with at least two years of licensed driving experience., • CPR and First Aid Certification preferred. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. ACKNOWLEDGEMENT: Recipient’s signature below constitutes recipient’s understanding of the requirements and ability to perform the essential functions of the position of with the revision date of . Print Name Signature Date Print Name (MMH Representative) Signature

Job DescriptionBenefits/Perks • Competitive Compensation, • Great Work Environment Responsibilities • Safely operate a variety of large, heavy machinery safely, such as excavators, loaders, dozers, and more, • Maintain all equipment used, including cleaning and regular maintenance, • Follow best digging practices for all projects, • Work closely with the rest of the team on each project to ensure successQualifications, • Must hold the proper license to operate heavy machinery in the state, • Previous construction or heavy equipment experience desired, • Strong communication skills, • Strong attention to detail, • The ability to work well within a team environment

ShopRite - ShopRite of New Paltz [Grocery Clerk / Team Member] As a Deli Clerk at ShopRite, you'll: Use a slicing machine and related equipment; Replenish Appy/Deli product; Prepare Appy/Deli product for sale; Follow approved procedures for receiving, code dating, preparing, storing, and price marki

Job Description • We have an opening for full time and part time DISHWASHER positions., • Location: Culinary Institute of America - 1946 Campus Drive, Hyde Park, NY 12538 Note: online applications accepted only., • Schedule: Full and part time schedule. Days and hours may vary. More details upon interview., • Requirement: No experience is necessary. Willing to train!, • Pay Range: $15.50 per hour to $16.50 per hour. We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1449014. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: This position is eligible for an Employee Referral Bonus! If you know someone that is qualified for this role, please use the ‘job search’ in PeopleHub to refer your referral and email them a link to apply. Your referral will be able to apply by clicking the link in the email. You can check the status through your profile, accessible via Careers in PeopleHub, by clicking on ‘referral tracking.’ For Employee Referral guidelines, FAQs and the Compass Employee Referral Policy, email . Become part of Restaurant Associates, the industry’s leading provider of dining and event catering for some of the nation's most prestigious museums, performing arts centers and corporations! Voted Glassdoor's Employee Choice Awards- Best Places to work This is R/A ! Job Summary Summary: Maintains dishes, pots, pans, trays, kitchen, work areas, equipment and utensils in orderly and sanitary condition. Essential Duties and Responsibilities: • Scrapes and rinses food from dirty dishes and washes them by hand or places them in racks or on conveyor to dishwashing machine depending on assigned equipment. Ensures complete cleanliness and sanitation., • Washes pots, pans and trays based on assigned procedures. Ensure complete cleanliness and sanitation., • Polishes silver using burnishing machine tumbler, chemical dip, buffing wheel and hand cloth depending on assigned equipment and procedures. Ensures complete cleanliness and sanitation., • Ensures compliance with outlined safety procedures., • Maintains temperatures and chemical levels as outlined by provided standards., • Keeps dish area orderly and in compliance with safety standards., • Sweeps and mops kitchen floors to ensure compliance with safety and sanitation standards., • Washes worktables, walls, refrigerators, meat blocks and other food prep surfaces., • Removes trash and places it in designated containers. Steam cleans or hoses out garbage cans., • Transfers supplies and equipment between storage and work areas., • Helps load and unload supplies and product. Both full-time and part-time positions offer the following benefits to associates: • Retirement Plan, • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Medical, • Dental, • Vision, • Life Insurance/AD, • Disability Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs) Abides by all Company policies and procedures including but not limited to: • The use of a medium weight cut gloves when handling or using knives, peelers, choppers, mandolins or cleaning a slicer., • The use of oven mitts, fryer gloves or steamer gloves when handling hot pans from ovens, warmers or steamtables., • The use of slip-resistant shoes and proper lifting techniques. Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act.

As a Machinist Trainee, you will be responsible for working within the framework of a team and performing the following activities: Learn the required skills to work within the Pilot Metals Development team Follow safety rules, manufacturing instructions, work rules and other manufacturing guideline

Adecco Staffing is hiringMachine Operators for a manufacturing company specializing in lighting fixtures. Schedule:** 4x10-hour shifts (Monday-Thursday) - Enjoy a 3-day weekend everyweek! Job Summary: Operate a variety of machinery in a fast-paced manufacturing environment producing lighting

Neptune Retail Solutions has immediate availability for a Part-time Retail Merchandiser who will specialize in the installation and maintenance of the iconic Instant Coupon Machine, at-the-shelf advertisements, and shopping cart ads. Demonstrate adaptability to the needs of our clients, retailers, c

Job Description Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufactures of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. Summary of Responsibility: A Field Service Technician is a key member of the Customer Support Department and is primarily responsible for the installation, preventive maintenance, solving and repair of Computer Numerically Controlled (CNC) Lathe, Milling and Multi-Functional Machining Centers. We are seeking customer focused professionals who have a positive attitude, a high interest in learning and great Customer service skills. This opportunity is an above average platform for technical advancement and compensation growth. What You Will Contribute: The CNC Field Service Technician must have or be willing to learn through training on the job and classroom an understanding of mechanical drawings, electrical/pneumatic/hydraulic schematics, PLC ladder diagrams and testing equipment required to effectively diagnose and resolve issues with electrical/mechanical components, as well as electro-mechanical and machine control systems. • Daily travel from home to Customer facilities with occasional overnight hotel stays required when servicing remote Customer locations within the designated coverage territory or when participating in remote training programs., • Demonstrating a willingness to help others and be a team member, • Install, commission, calibrate, maintain, tackle, diagnose, and repair CNC equipment and accessory CNC equipment at customer facilities. Service calls also include operator training, networking between systems, software applications, preventive maintenance, major assembly replacements and alignments, overhauls/refurbishments, upgrades/retrofits, and un-installation services., • Provide a direct communication link between the Customer and the Service Group of the Robert E. Morris Company., • Provide voice of Customer feedback., • Through service and Customer relationships, build brand dedication., • Conduct travel and work in a safe manner, constantly learning new technology and soft skills., • Apply machine tool manuals, technical documents, as well as internal and external authorities to optimally diagnose and resolve CNC equipment issues., • Proficient verbal and written communication and Customer relation skills., • Able to interact and effectively communicate in person and over the phone with customer and co-workers., • Present a professional image., • Must be adaptable to changes and able to deal with change, delays, or general work-related issues., • Basic digital literacy and shown understanding of MS Word, Excel, and Outlook., • Must have, and/or be willing/capable of being trained to develop, electro-mechanical skills (motors, drives, transformers etc.)., • Knowledge of machine tool manufacture, installation, operation, maintenance & repair and/or a broad shop background – is a plus., • Basic mechanical and logical solving skills are a must., • Rational decision making and problem-solving skills. Work Environment • Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated or manual machinery. General office and training environment experienced at the Robert E. Morris Company. Other Functions: What’s in it for You: • We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work:Competitive starting salary, • Market competitive comprehensive health benefits including a zero premium medical plan offering, vision, dental, and company paid life insurance, • 3+ Weeks’ Vacation to Start, • 10 Company Paid Holidays, • 401(k) retirement plan with company contributionTuition reimbursement, • Employee appreciation events and perksEmployee Assistance Program Mental and Physical Requirements: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Must be highly mobile, able to access all areas of the premises., • Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects., • Ability to sit for prolonged period of times., • Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees., • Ability to frequently use hands and arms., • Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. Requisition #: 1222B - Poughkeepsie, NY

Job Description Overview: We are seeking a skilled and experienced Seamstress with formal wear experience to join our team. As a Thimble Seamstress, you will be responsible for providing excellent customer service and performing alterations and repairs on garments at your home workspace. Requirements: * You must own a sewing machine at home, as this is a work from home position. * At least 3 Years experience as a seamstress/performing formal dress alterations. * Proven experience working with Bridal, Prom or Evening Dresses is preferred. * Proficiency in using sewing machines and other alteration tools. * Strong knowledge of garment construction techniques. * Excellent attention to detail and ability to perform precise measurements. * Basic math skills for measuring and calculating fabric requirements. * Ability to maintain high-quality standards. * Strong communication and customer service skills. Responsibilities: * Perform alterations and repairs on garments, including hemming, taking in or letting out seams, working with multiple laters and replacing buttons or zippers. * Use sewing machines, hand tools, and other equipment to complete tailoring tasks. * Provide exceptional customer service by assisting our customers with fitting and ensuring their satisfaction with the finished product. * Take accurate measurements from customers during fittings. * Maintain a clean and organized work area at home where the work is done. If you have a passion for fashion, excellent sewing skills, and enjoy working with customers, we would love to hear from you. Join our team as a work from home Seamstress and contribute to improving garments for our valued customers.

Aerotek - JobID: JP-005595461 [Production Operator / Machinist] As a Machine Operator at Aerotek, you'll: Operate equipment and/or second-operation machines through various tasks ; Perform inspecting, trimming, testing, fixturing, assembling, and packaging products; Perform other duties as assigned

As a Machinist Trainee, you will be responsible for working within the framework of a team and performing the following activities: Learn the required skills to work within the Pilot Metals Development team Follow safety rules, manufacturing instructions, work rules and other manufacturing guideline

Pratt Industries - JobID: 116-20341 [Production Operator / Machinist] As a Machine Operator at Pratt Industries, you'll: Safely operate production machines including setup, operation, cleanup, and recommending improvements to operations to meet customer demand; Maximize the utilization of equipment

Aerotek - JobID: JP-005606890 [Production Operator / Machinist] As a Machine Operator at Aerotek, you'll: Operate equipment and/or second-operation machines through various tasks ; Perform inspecting, trimming, testing, fixturing, assembling, and packaging products; Perform other duties as assigned

Manpower - JobID: 5777230 [Production Operator / Assembly Line Worker] As an Assembly Technician at Manpower, you'll: Assemble products according to specifications; Inspect finished products for quality assurance; Operate machinery and tools to complete tasks; Follow safety protocols and guidelines

Aerotek - JobID: JP-005597680 [Production Operator / Machinist] As a Machine Operator at Aerotek, you'll: Operate equipment and/or second-operation machines; Inspect, trim, test, fixture, assemble, and package products; Perform other duties as assigned.

Manpower - JobID: 5769727 [Production Operator / Assembly Line Worker] As a Manufacturing Technician at Manpower, you'll: Operate machinery to assemble products; Inspect finished goods for quality control; Maintain a clean and organized work area; Troubleshoot equipment issues and perform routine ma

Troubleshoot production quality issues and demonstrate a good working knowledge of converting machinery and automated systems.

Cintas Corporation - JobID: 1331265200 [Production Operator / Assembly Line Worker] As a Production Associate at Cintas, you'll: Be responsible for preparing bundles for delivery as required by the customer; Perform product folding manually by hand or through use of an industrial garment folding mac

Do you like to work on your feet and keep things neat and organized? Our merchandising & stocking associates connect all of the dots to make sure members can find everything they have on their shopping list.From every day needs to special occasions, members need you, as their mini tour guide, to tak

Cintas Corporation - JobID: 1331265000 [Production Operator / Assembly Line Worker] As a Production Associate at Cintas, you'll: Be responsible for preparing bundles for delivery as required by the customer; Perform product folding manually by hand or through use of an industrial garment folding mac

At Adams, we prioritize creating a warm and welcoming environment for both our customers and team members.We believe exceptional customer service goes beyond meeting needs-it's about treating everyone with genuine respect, kindness, and appreciation.Each team member is expected to greet customers pe

Cintas Corporation - JobID: 1322556000 [Production Operator / Assembly Line Worker] As a Production Associate at Cintas, you'll: Be responsible for preparing bundles for delivery as required by the customer; Perform product folding manually by hand or through use of an industrial garment folding mac

Maintenance Mechanics 2nd and 3rd Shifts Starting Hourly Range : $29.Based on qualifications and/or experience.Rochelle Foods LLC has openings for Industrial Maintenance Mechanics.Successful candidates will work in our food processing production facility located in Rochelle, IL and enjoy competiti

Sam's Club - JobID: WD129156 [Meat Clerk / Butcher] As a Meat Cutter at Sam's Club, you'll: Provide Meat products to Members by processing (cutting, slicing, grinding, and wrapping) meat products based on Company specifications Operate, repair, and sanitize equipment; Assist Members with purchasing

Assembler Job Duties: Prepares work to be accomplished by studying assembly instructions, blueprint specifications, and parts lists; gathering parts, subassemblies, tools, and materials

We are seeking a reliable and detail-oriented Water Spider to join our team.In this role, you will be responsible for ensuring the efficient flow of materials within the production area.The Water Spider will work closely with assemblers and supervisors to keep production lines stocked and organized,

In this role, the right candidate will build, wire, and test electrical apparatus and control equipment, using your skills to follow technical drawings and procedures.You'll contribute to products that support cutting-edge research, healthcare, and environmental progress.Join a team that's building

Machine Operator has the ability to run multiple machines effectively and efficiently on a continuous basis and can identify problems during the production run, position work pieces, and inspect parts on a daily basis using various types of inspection equipment. Must be able to run parts to spec on

In this role, the right candidate will build, wire, and test electrical apparatus and control equipment, using your skills to follow technical drawings and procedures.You'll contribute to products that support cutting-edge research, healthcare, and environmental progress.Join a team that's building

CNC Machine Repair; CNC Machine Installation. Assemble parts manually and via semi-automatic/automatic equipment, including CNC and plastic injection molding machines. Set up machines and perform routine maintenance on fabrication equipment.

Machine Operator has the ability to run multiple machines effectively and efficiently on a continuous basis and can identify problems during the production run, position work pieces, and inspect parts on a daily basis using various types of inspection equipment. Performs required operations on EDM m

PROGRAMMING EXPERIENCE Key Responsibilities Set up and calibrate CNC machines according to specifications. Monitor machine operations and make adjustments to maintain quality standards. Document setup procedures and machine performance.

Machine Operator has the ability to run multiple machines effectively and efficiently on a continuous basis and can identify problems during the production run, position workpieces, and inspect parts on a daily basis using various types of inspection equipment. Performs required operations on EDM ma

Perform advanced troubleshooting, repair, and maintenance on a wide range of industrial machinery and equipment, including hydraulic, pneumatic, and mechanical systems. Install, inspect, and upgrade production machinery and infrastructure.

Knowledge of safety protocols, building codes and utilization of related machinery and tools is required.

Join a family-owned food manufacturer with deep roots in the community and a reputation for quality and stability.This hands-on role is critical to keeping operations running efficiently and safely.Perform routine, preventive, and corrective maintenance on production and facility equipment.Troublesh

Meyer Tool currently has close to 1500 electrical discharge machining (EDM) machines (wire, ram, and fast hole drilling) including waterjet machining, conventional machining, abrasive grinding, laser machining, welding, EB welding, coating, airflow testing and other processes required to be the trus