Machine jobs in San Antonio, TexasCreate job alerts

Essential Duties and Responsibilities include the following. Other duties and tasks may be assigned. • Demonstrate effective use of supplies and staff labor hours., • May assist with billing log preparation and updates., • Perform duties as assigned to meet the patient care or operational needs of the clinic, • Obtain blood samples for laboratory analysis as required to complete physician orders., • Complete and document monthly review of patient medication profiles., • Knowledge of and comply with applicable health care professionals practice act requirements., • Perform duties at all times under the supervision of a Charge Nurse and within limitations established by and in accordance with company policy and procedures, applicable state and federal laws and regulations, • Maintain thorough, accurate, and appropriate documentation in the patient record of all treatments, activities, and communication with the patient, physician and other healthcare professionals to include progress reports., • Report any significant information or change in patient condition to the Charge Nurse., • Report machine problems to Biomedical Technician and Administrator., • Participate in staff meetings as required. Attend in-service and continuing education offerings in compliance with company policy and procedure., • Assist with staff training as requested. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Requirements include: • Current LVN/LPN license in applicable state. License must be maintained as current and in good standing., • CPR certification required within 90 days of hire., • Confirmation of ability to distinguish all primary colors., • Previous dialysis experience preferred., • Successful completion of USRC training program approved by the Medical Director, including demonstrated competency, within 8 weeks of hire., • Demonstrated working knowledge of the English language and ability to communicate verbally and in writing., • Must be able to organize time and tasks well., • Must have basic computer skills; proficiency in all USRC clinical applications required within 90 days of hire., • Must meet any practice requirement(s) for the applicable state. All Full Time employees are eligible for the following benefits: * Medical / Pharmacy * Dental * Vision * Voluntary benefits * 401k with employer match * Virtual Care * Life Insurance * Voluntary Benefits * PTO All Part Time employees are eligible for the following benefits: * 401k with employer match * PTO

Overview: Company Overview MasTec Industrial, along with sister companies Casey Industrial and Phoenix Industrial, has served the power industry since 1947. We support utilities, developers, and municipalities with EPC services and project development expertise. Ranked by ENR as the #1 Power Contractor, we specialize in natural gas, oil, biomass, and waste-to-energy projects. Our team brings over 30 years of experience in utility and industrial systems, including simple and combined cycle plants and reciprocating engines. We’re committed to delivering quality, safety, and value at every project phase, from concept to operations. At MasTec Industrial, we invest in top talent and foster a respectful, inclusive environment where employees thrive as innovative leaders. The MasTec Industrial operating group is part of the MasTec Clean Energy & Infrastructure (CE&I) business segment. The CE&I segment generates over $4.5 billion in annual revenue, providing construction services across our renewables, industrial, infrastructure, and general building operating groups. Sustainability and safety are foundational to our culture and influence everything we do. MasTec, a minority-owned Fortune 500 company, has shaped the construction industry for more than 90 years. With over 35,000 employees and 400 offices nationwide, we provide flexibility and career growth in dynamic work environments. POSITION SUMMARY: Responsible for laying out, fabricating, assembling, installing and maintaining piping and piping systems, fixtures and equipment for steam, hot water, heating, cooling, lubricating, sprinkling and industrial processing systems. $3/HOUR COMPLETION BONUS FOR PIPE CREW Eligibility for completion bonus: Effective April 27, 2026, eligible hourly employees will receive an additional $3.00 for each hour worked. Hours eligible for this bonus exclude holiday pay, paid time off (PTO), and any leave of absence. Employees must be actively employed and in good standing at the time of payout to receive the bonus. Forfeiture of Eligibility: Employees who voluntarily resign or are terminated for cause prior to payout will forfeit all accrued bonus amounts. Responsibilities: ESSENTIAL JOB FUNCTIONS: • Promote and comply with all Company and safety policies and procedures, • Select type and size of pipe and related materials according to job specifications, • Inspect worksite to determine presence of obstructions and to determine that holes will not cause structural weakness, • Plan sequence of installation to avoid obstructions and activities of other construction workers, • Cut pipe using hacksaw, pipe cutters, hammer and chisel, cutting torch and pipe cutting machine, • Thread pipe using threading machine, • Bend pipe by hand or with pipe-bending machine, • Assemble and install a variety of metal and nonmetal pipe and pipe fittings, including: brass, copper, lead, glass and plastic, • Join pipe by means of threaded, caulked, wiped, soldered, brazed, fused or cemented joints, • Use hand tools to secure pipe to structure with clamps, brackets and hangers, • Install and maintain refrigeration and air-conditioning systems, including: compressors, pumps, meters, pneumatic and hydraulic controls and piping, • Test piping system for leaks by increasing pressure in pipes and observing gauges attached to pipes for indication of leaks, • Weld holding fixtures to structural steel members, • May be required to travel to different jobsites on limited notice, • 4+ years related experience and/or training or equivalent combination of education and experience, • High school diploma or GED Certification (preferred), • Be knowledgeable of MIC Health and Safety programs and project specific regulations., • When on-site, actively participate in daily toolbox meetings with crews and subcontractors., • Set a personal example of safe behavior., • Read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals, • Add and subtract two-digit numbers, multiply and divide with 10's and 100's and ability to perform these operations using units weight measurement and volume, • Common sense understanding to carry out instructions furnished in written or oral form, • Ability to work within precise standards of accuracy and follow set procedures and standards, • Other may duties may be assigned, • Work up to a 12-hour shift doing hard physical work in varying temperatures and outside conditions., • May need to maintain physical strength and stamina; Use arms, hands, and legs fully; Push, pull, and frequently lift and carry objects weighing up to 50 pounds; and stoop, kneel, balance, crouch, crawl, and climb to perform job tasks., • Stamina to perform this task repetitively and continuously for several hour intervals., • Uncontrolled environmental conditions: Constant change in weather and site conditions., • This work environment may involve moderate exposure to unusual elements, such as extreme temperatures, dirt, dust, fumes, smoke, unpleasant odors and/or loud noises., • Ability to wear personal protective equipment is required (including but not limited to- safety toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.)., • Move in and around confined, cluttered, and uneven areas., • May need to work at heights and must be able to abide by all safety and fall-protection requirements; must be able to wear and utilize all safety equipment required for work at heights., • Evaluate information based on measurable standards; and see details in objects or drawings and recognize slight differences in shapes and shadings., • Visualize objects in three dimensions from drawings., • Keep good balance and work at heights., • See well (either naturally or with correction)., • Hear well (either naturally or with correction.) This position is a Full-Time position scheduled to work typically 50 hours per week. Schedule is subject to projects requirements. TRAVEL: Travel required up to 90%. Position requires presence directly on the Project Site location with intermittent travel to residence of record. What's in it for you: Financial Wellbeing • Compensation $0-$0 / hour, commensurate with experience, • Competitive pay with ongoing performance review and merit increase, • 401(k) with company match & Employee Stock Purchase Plan (ESPP), • Medical, Dental, and Vision insurance (plan choice) - coverage for spouse, domestic partner, and children, • Diabetes Management, Telehealth Coverage, Prescription Drug Plan, Pet Insurance, • Short and long-term disability, life insurance, and accidental death & dismemberment, • Voluntary life insurance, accident, critical illness, hospital indemnity coverage, • Emergency Travel Assistance Program, • Group legal plan Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need accommodation as part of the employment process, contact . Due to the high volume of applications received, we are unable to respond to individual requests regarding application status. Please log into your candidate profile for up-to-date information. MasTec, Inc. is an Equal Employment Opportunity Employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. MasTec Clean Energy & Infrastructure and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. Appcast (For Export): #appflash

Description Introduction Are you passionate about the patient experience? At HCA Healthcare, we are committed to caring for patients with purpose and integrity. We care like family! Jump-start your career as a(an) IR Tech VascularCardio PRN today with Methodist Hospital. Benefits Methodist Hospital, offers a total rewards package that supports the health, life, career and retirement of our colleagues. The available plans and programs include: • Comprehensive medical coverage that covers many common services at no cost or for a low copay. Plans include prescription drug and behavioral health coverage as well as free telemedicine services and free AirMed medical transportation., • Additional options for dental and vision benefits, life and disability coverage, flexible spending accounts, supplemental health protection plans (accident, critical illness, hospital indemnity), auto and home insurance, identity theft protection, legal counseling, long-term care coverage, moving assistance, pet insurance and more., • Free counseling services and resources for emotional, physical and financial wellbeing, • 401(k) Plan with a 100% match on 3% to 9% of pay (based on years of service), • Employee Stock Purchase Plan with 10% off HCA Healthcare stock, • Family support through fertility and family building benefits with Progyny and adoption assistance., • Referral services for child, elder and pet care, home and auto repair, event planning and more, • Consumer discounts through Abenity and Consumer Discounts, • Retirement readiness, rollover assistance services and preferred banking partnerships, • Education assistance (tuition, student loan, certification support, dependent scholarships), • Colleague recognition program, • Time Away From Work Program (paid time off, paid family leave, long- and short-term disability coverage and leaves of absence), • Employee Health Assistance Fund that offers free employee-only coverage to full-time and part-time colleagues based on income. Note: Eligibility for benefits may vary by location. Come join our team as a(an) IR Tech VascularCardio PRN. We care for our community! Just last year, HCA Healthcare and our colleagues donated $13.8 million dollars to charitable organizations. Apply Today! Job Summary and Qualifications Qualifications: Minimum Education, Experience, Training, Required Knowledge, Skill, Abilities and Other Job-Related Characteristics: 1. Education: Graduate of accredited Radiologic Sciences program, 2. Experience: One year minimum in Radiology, 3. Employee completes initial and ongoing training and competencies as defined by service line, facility and department/unit which are specific to the needs of the patient population served (if applicable). Minimum License, Certificates, or Registrations Required: 1. Required: • American Registry of Radiologic Technologist • Texas Medical Board certified • Basic Life Support (BLS), 2. Preferred: • Vascular Interventional Certified. ARRT (VI) What you will do in the Role: 1. Performs interventional radiologic procedures (primarily Angiography) under the direction of a physician, utilizing ionizing radiation and other diagnostic methods: Assists the physician as required and responsible for processing all documentation., 2. Demonstrate competency in all diagnostic, standard and neurological Interventional radiology procedures, procedural scrub, room preparation and setup to include power injector., 3. Follows established standards and practices under the direction or a credentialed radiologist and/or vascular surgeon., 4. Competency in assisting with complex Invasive Vascular and Therapeutic Imaging procedures including but not limited to, diagnostic body and neuro angiograms, vascular and carotid stenting, embolization, Stroke intervention, Cerebral Aneurysms., 5. Participate in on-call schedule and for neurological cases must live within 30 minutes of the hospital to meet required response time., 6. Holding pressure and placement of closure devices. Operation of ultrasound machine, Operation and processing of 3D Imaging. Assisting in preparation of embolic material for embolization, various catheters, angioplasty balloons, vascular stents and coils Additional Job Roles: 1. Supports the mission and vision of the Methodist Healthcare System. Understands and is committed to helping the Methodist Healthcare System and its associated facilities achieve its goals., 2. Must learn and comply with System and facility safety policies and rules; must use appropriate safety equipment and procedures at all times; must immediately report all unsafe conditions to supervisors; must be familiar with all safety features of equipment, tools or materials encompassed by job duties; and must check with supervisors (prior to job performance) if there is a question as to the safe procedure to be used for any job function., 3. Adheres to the MHS Code of Conduct and demonstrates ethical behavior as expected by our patients, colleagues and the community. Understands the personal obligation to report any activity that appears to violate applicable laws, rules regulations or the Code of Conduct itself., 4. Completes other duties as assigned. • Basic Cardiac Life Support must be obtained within 30 days of employment start date, • Associate Degree, • Certified Medical Radiologic Technologist, or State Registered Radiologic Technician, • Registered Radiographer (ARRT) Methodist Hospital opened in 1963 as the first hospital in the now internationally acclaimed South Texas Medical Center. With over 900 beds, Methodist Hospital offers a broad range of specialties including cardiology, oncology, bone marrow transplants, emergency medicine, neurosciences, maternity care, gynecology and orthopedics. We are proud to be the largest provider of the lifesaving ECMO Program in San Antonio, are home to the largest robotics program in the world, and our Adult Blood Cancer and Stem Cell Transplant unit has become the first program to receive FACT Accreditation in North America. As the flagship hospital, and most comprehensive medical care facility of Methodist Healthcare, we appreciate the support and recognition we receive from the community. We’ve recently been named the No.1 Best Regional Hospital by the U.S. News and World Report for 2019-20. We pride ourselves on providing the highest quality of care possible for our patients, which is proven by our consecutive Grade A Leapfrog Hospital Safety scores. In addition, Methodist Hospital not only received a Primary Stroke Center designation from The Joint Commission, but has also received a Comprehensive Stroke Center Certification from DNV GL Healthcare, designating the facility as offering the most advanced stroke treatment available in a given geographic area. For more information, please visit our website at and select Methodist Hospital under Locations. "The great hospitals will always put the patient and the patient's family first, and the really great institutions will provide care with warmth, compassion, and dignity for the individual."- Dr. Thomas Frist, Sr. HCA Healthcare Co-Founder If you are looking for an opportunity that provides satisfaction and personal growth, we encourage you to apply for our IR Tech VascularCardio PRN opening. We promptly review all applications. Highly qualified candidates will be contacted for interviews. Unlock the possibilities and apply today! We are an equal opportunity employer. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Introduction Are you passionate about the patient experience? At HCA Healthcare, we are committed to caring for patients with purpose and integrity. We care like family! Jump-start your career as a(an) IR Neuro Tech today with Methodist Hospital. Benefits Methodist Hospital offers a total rewards package that supports the health, life, career and retirement of our colleagues. The available plans and programs include: • Comprehensive medical coverage that covers many common services at no cost or for a low copay. Plans include prescription drug and behavioral health coverage as well as free telemedicine services and free AirMed medical transportation., • Additional options for dental and vision benefits, life and disability coverage, flexible spending accounts, supplemental health protection plans (accident, critical illness, hospital indemnity), auto and home insurance, identity theft protection, legal counseling, long-term care coverage, moving assistance, pet insurance and more., • Free counseling services and resources for emotional, physical and financial wellbeing, • 401(k) Plan with a 100% match on 3% to 9% of pay (based on years of service), • Employee Stock Purchase Plan with 10% off HCA Healthcare stock, • Family support through fertility and family building benefits with Progyny and adoption assistance., • Referral services for child, elder and pet care, home and auto repair, event planning and more, • Consumer discounts through Abenity and Consumer Discounts, • Retirement readiness, rollover assistance services and preferred banking partnerships, • Education assistance (tuition, student loan, certification support, dependent scholarships), • Colleague recognition program, • Time Away From Work Program (paid time off, paid family leave, long- and short-term disability coverage and leaves of absence), • Employee Health Assistance Fund that offers free employee-only coverage to full-time and part-time colleagues based on income. Note: Eligibility for benefits may vary by location. Come join our team as a(an) IR Neuro Tech. We care for our community! Just last year, HCA Healthcare and our colleagues donated $13.8 million dollars to charitable organizations. Apply Today! Job Summary and Qualifications General Statement of Duties: The Interventional Radiologic technologist performs routine and complex Invasive Vascular and Therapeutic Imaging procedures as requested by a physician and under the direct supervision of a Radiologist or vascular surgeon for the diagnosis and treatment of organ and vascular disease in accordance with established protocols. The technologist must be able to effectively explain the procedure to the patient and be sure they are comfortable and at ease during the exam and provide care to the patients while obtaining diagnostic quality imaging for interpretation. What you will do in this Role: 1. Performs interventional radiologic procedures (primarily Angiography) under the direction of a physician, utilizing ionizing radiation and other diagnostic methods: Assists the physician as required and responsible for processing all documentation., 2. Demonstrate competency in all diagnostic, standard and neurological Interventional radiology procedures, procedural scrub, room preparation and setup to include power injector., 3. Follows established standards and practices under the direction or a credentialed radiologist and/or vascular surgeon., 4. Competency in assisting with complex Invasive Vascular and Therapeutic Imaging procedures including but not limited to, diagnostic body and neuro angiograms, vascular and carotid stenting, embolization, 5. Participate in on-call schedule and for neurological cases must live within 30 minutes of the hospital to meet required response time., 6. Holding pressure and placement of closure devices. Operation of ultrasound machine, Operation and processing of 3D Imaging. Assisting in preparation of embolic material for embolization, various catheters, angioplasty balloons, vascular stents and coils Other Job Functions: 1. Supports the mission and vision of the Methodist Healthcare System. Understands and is committed to helping the Methodist Healthcare System and its associated facilities achieve its goals., 2. Must learn and comply with System and facility safety policies and rules; must use appropriate safety equipment and procedures at all times; must immediately report all unsafe conditions to supervisors; must be familiar with all safety features of equipment, tools or materials encompassed by job duties; and must check with supervisors (prior to job performance) if there is a question as to the safe procedure to be used for any job function., 3. Adheres to the MHS Code of Conduct and demonstrates ethical behavior as expected by our patients, colleagues and the community. Understands the personal obligation to report any activity that appears to violate applicable laws, rules regulations or the Code of Conduct itself., 4. Completes other duties as assigned. Minimum Education, Experience, Training, Required Knowledge, Skill, Abilities and Other Job-Related Characteristics: • Basic Cardiac Life Support must be obtained within 30 days of employment start date, • Associate Degree, • (RT) Radiologic Technologist/Radiographer, • (ARRT-R) Radiography Methodist Hospital opened in 1963 as the first hospital in the now internationally acclaimed South Texas Medical Center. With over 900 beds, Methodist Hospital offers a broad range of specialties including cardiology, oncology, bone marrow transplants, emergency medicine, neurosciences, maternity care, gynecology and orthopedics. We are proud to be the largest provider of the lifesaving ECMO Program in San Antonio, are home to the largest robotics program in the world, and our Adult Blood Cancer and Stem Cell Transplant unit has become the first program to receive FACT Accreditation in North America. As the flagship hospital, and most comprehensive medical care facility of Methodist Healthcare, we appreciate the support and recognition we receive from the community. We’ve recently been named the No.1 Best Regional Hospital by the U.S. News and World Report for 2019-20. We pride ourselves on providing the highest quality of care possible for our patients, which is proven by our consecutive Grade A Leapfrog Hospital Safety scores. In addition, Methodist Hospital not only received a Primary Stroke Center designation from The Joint Commission, but has also received a Comprehensive Stroke Center Certification from DNV GL Healthcare, designating the facility as offering the most advanced stroke treatment available in a given geographic area. For more information, please visit our website at and select Methodist Hospital under Locations. "The great hospitals will always put the patient and the patient's family first, and the really great institutions will provide care with warmth, compassion, and dignity for the individual."- Dr. Thomas Frist, Sr. HCA Healthcare Co-Founder If you are looking for an opportunity that provides satisfaction and personal growth, we encourage you to apply for our IR Neuro Tech opening. We promptly review all applications. Highly qualified candidates will be contacted for interviews. Unlock the possibilities and apply today! We are an equal opportunity employer. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Introduction Are you passionate about the patient experience? At HCA Healthcare, we are committed to caring for patients with purpose and integrity. We care like family! Jump-start your career as a(an) IR Neuro Tech today with Methodist Hospital Stone Oak. Benefits Methodist Hospital Stone Oak offers a total rewards package that supports the health, life, career and retirement of our colleagues. The available plans and programs include: • Comprehensive medical coverage that covers many common services at no cost or for a low copay. Plans include prescription drug and behavioral health coverage as well as free telemedicine services and free AirMed medical transportation., • Additional options for dental and vision benefits, life and disability coverage, flexible spending accounts, supplemental health protection plans (accident, critical illness, hospital indemnity), auto and home insurance, identity theft protection, legal counseling, long-term care coverage, moving assistance, pet insurance and more., • Free counseling services and resources for emotional, physical and financial wellbeing, • 401(k) Plan with a 100% match on 3% to 9% of pay (based on years of service), • Employee Stock Purchase Plan with 10% off HCA Healthcare stock, • Family support through fertility and family building benefits with Progyny and adoption assistance., • Referral services for child, elder and pet care, home and auto repair, event planning and more, • Consumer discounts through Abenity and Consumer Discounts, • Retirement readiness, rollover assistance services and preferred banking partnerships, • Education assistance (tuition, student loan, certification support, dependent scholarships), • Colleague recognition program, • Time Away From Work Program (paid time off, paid family leave, long- and short-term disability coverage and leaves of absence), • Employee Health Assistance Fund that offers free employee-only coverage to full-time and part-time colleagues based on income. Note: Eligibility for benefits may vary by location. Come join our team as a(an) IR Neuro Tech. We care for our community! Just last year, HCA Healthcare and our colleagues donated $13.8 million dollars to charitable organizations. Apply Today! Job Summary and Qualifications General Statement of Duties: The Interventional Radiologic technologist performs routine and complex Invasive Vascular and Therapeutic Imaging procedures as requested by a physician and under the direct supervision of a Radiologist or vascular surgeon for the diagnosis and treatment of organ and vascular disease in accordance with established protocols. The technologist must be able to effectively explain the procedure to the patient and be sure they are comfortable and at ease during the exam and provide care to the patients while obtaining diagnostic quality imaging for interpretation. What you will do in this Role: 1. Performs interventional radiologic procedures (primarily Angiography) under the direction of a physician, utilizing ionizing radiation and other diagnostic methods: Assists the physician as required and responsible for processing all documentation., 2. Demonstrate competency in all diagnostic, standard and neurological Interventional radiology procedures, procedural scrub, room preparation and setup to include power injector., 3. Follows established standards and practices under the direction or a credentialed radiologist and/or vascular surgeon., 4. Competency in assisting with complex Invasive Vascular and Therapeutic Imaging procedures including but not limited to, diagnostic body and neuro angiograms, vascular and carotid stenting, embolization, 5. Participate in on-call schedule and for neurological cases must live within 30 minutes of the hospital to meet required response time., 6. Holding pressure and placement of closure devices. Operation of ultrasound machine, Operation and processing of 3D Imaging. Assisting in preparation of embolic material for embolization, various catheters, angioplasty balloons, vascular stents and coils Other Job Functions: 1. Supports the mission and vision of the Methodist Healthcare System. Understands and is committed to helping the Methodist Healthcare System and its associated facilities achieve its goals., 2. Must learn and comply with System and facility safety policies and rules; must use appropriate safety equipment and procedures at all times; must immediately report all unsafe conditions to supervisors; must be familiar with all safety features of equipment, tools or materials encompassed by job duties; and must check with supervisors (prior to job performance) if there is a question as to the safe procedure to be used for any job function., 3. Adheres to the MHS Code of Conduct and demonstrates ethical behavior as expected by our patients, colleagues and the community. Understands the personal obligation to report any activity that appears to violate applicable laws, rules regulations or the Code of Conduct itself., 4. Completes other duties as assigned. Minimum Education, Experience, Training, Required Knowledge, Skill, Abilities and Other Job-Related Characteristics: • Basic Cardiac Life Support, • (ARRT-R) Radiography one year minimum, • Associate Degree Methodist Hospital Stone Oak is equipped with the most modern technology available. With over 280 beds, services include emergency care, general surgery, obstetrics and gynecology, neonatology, oncology, neurosurgery, orthopedics, and acute rehab services. Methodist Hospital Stone Oak is accredited by the Joint Commission as a Primary Stroke Center and Chest Pain Center. The stroke rehabilitation program has received the Joint Commission's Gold Seal of Approval® for Disease-Specific Care Certification of Stroke Rehabilitation. We belong to the Texas Institute for Robotic Surgery. Our surgeons and technology offer minimally invasive options to patients. Surgeons from around the country come to train under our world class team. The hospital has been recognized by Leapfrog’s Hospital Safety Grade A and by Modern Healthcare as one of the Top 100 Best Places to Work in Healthcare. We have also been recognized as a Joint Commission Top Performer on Key Quality Measures®. Finally, by Medicare.gov as #1 in San Antonio and #6 in the entire nation. The hospital is 1 of only 102 hospitals to receive Medicare.gov’s 5-star rating. Join our team to be part of the innovation. "The great hospitals will always put the patient and the patient's family first, and the really great institutions will provide care with warmth, compassion, and dignity for the individual."- Dr. Thomas Frist, Sr. HCA Healthcare Co-Founder If you are looking for an opportunity that provides satisfaction and personal growth, we encourage you to apply for our IR Neuro Tech opening. We promptly review all applications. Highly qualified candidates will be contacted for interviews. Unlock the possibilities and apply today! We are an equal opportunity employer. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Introduction Are you passionate about the patient experience? At HCA Healthcare, we are committed to caring for patients with purpose and integrity. We care like family! Jump-start your career as a(an) IR Tech PRN today with Methodist Hospital Stone Oak. Benefits Methodist Hospital Stone Oak offers a total rewards package that supports the health, life, career and retirement of our colleagues. The available plans and programs include: • Comprehensive medical coverage that covers many common services at no cost or for a low copay. Plans include prescription drug and behavioral health coverage as well as free telemedicine services and free AirMed medical transportation., • Additional options for dental and vision benefits, life and disability coverage, flexible spending accounts, supplemental health protection plans (accident, critical illness, hospital indemnity), auto and home insurance, identity theft protection, legal counseling, long-term care coverage, moving assistance, pet insurance and more., • Free counseling services and resources for emotional, physical and financial wellbeing, • 401(k) Plan with a 100% match on 3% to 9% of pay (based on years of service), • Employee Stock Purchase Plan with 10% off HCA Healthcare stock, • Family support through fertility and family building benefits with Progyny and adoption assistance., • Referral services for child, elder and pet care, home and auto repair, event planning and more, • Consumer discounts through Abenity and Consumer Discounts, • Retirement readiness, rollover assistance services and preferred banking partnerships, • Education assistance (tuition, student loan, certification support, dependent scholarships), • Colleague recognition program, • Time Away From Work Program (paid time off, paid family leave, long- and short-term disability coverage and leaves of absence), • Employee Health Assistance Fund that offers free employee-only coverage to full-time and part-time colleagues based on income. Note: Eligibility for benefits may vary by location. Come join our team as a(an) IR Tech PRN. We care for our community! Just last year, HCA Healthcare and our colleagues donated $13.8 million dollars to charitable organizations. Apply Today! Job Summary and Qualifications General Statement of Duties: The Interventional Radiologic technologist performs routine and complex Invasive Vascular and Therapeutic Imaging procedures as requested by a physician and under the direct supervision of a Radiologist or vascular surgeon for the diagnosis and treatment of organ and vascular disease in accordance with established protocols. The technologist must be able to effectively explain the procedure to the patient and be sure they are comfortable and at ease during the exam and provide care to the patients while obtaining diagnostic quality imaging for interpretation. What you will do in this Role: 1. Performs interventional radiologic procedures (primarily Angiography) under the direction of a physician, utilizing ionizing radiation and other diagnostic methods: Assists the physician as required and responsible for processing all documentation., 2. Demonstrate competency in all diagnostic, standard and neurological Interventional radiology procedures, procedural scrub, room preparation and setup to include power injector., 3. Follows established standards and practices under the direction or a credentialed radiologist and/or vascular surgeon., 4. Competency in assisting with complex Invasive Vascular and Therapeutic Imaging procedures including but not limited to, diagnostic body and neuro angiograms, vascular and carotid stenting, embolization, 5. Participate in on-call schedule and for neurological cases must live within 30 minutes of the hospital to meet required response time., 6. Holding pressure and placement of closure devices. Operation of ultrasound machine, Operation and processing of 3D Imaging. Assisting in preparation of embolic material for embolization, various catheters, angioplasty balloons, vascular stents and coils Other Job Functions: 1. Supports the mission and vision of the Methodist Healthcare System. Understands and is committed to helping the Methodist Healthcare System and its associated facilities achieve its goals., 2. Must learn and comply with System and facility safety policies and rules; must use appropriate safety equipment and procedures at all times; must immediately report all unsafe conditions to supervisors; must be familiar with all safety features of equipment, tools or materials encompassed by job duties; and must check with supervisors (prior to job performance) if there is a question as to the safe procedure to be used for any job function., 3. Adheres to the MHS Code of Conduct and demonstrates ethical behavior as expected by our patients, colleagues and the community. Understands the personal obligation to report any activity that appears to violate applicable laws, rules regulations or the Code of Conduct itself., 4. Completes other duties as assigned. Minimum Education, Experience, Training, Required Knowledge, Skill, Abilities and Other Job-Related Characteristics: • Basic Cardiac Life Support must be obtained within 15 days of employment start date, • (ARRT-R) Radiography, • Associate Degree Methodist Hospital Stone Oak is equipped with the most modern technology available. With over 280 beds, services include emergency care, general surgery, obstetrics and gynecology, neonatology, oncology, neurosurgery, orthopedics, and acute rehab services. Methodist Hospital Stone Oak is accredited by the Joint Commission as a Primary Stroke Center and Chest Pain Center. The stroke rehabilitation program has received the Joint Commission's Gold Seal of Approval® for Disease-Specific Care Certification of Stroke Rehabilitation. We belong to the Texas Institute for Robotic Surgery. Our surgeons and technology offer minimally invasive options to patients. Surgeons from around the country come to train under our world class team. The hospital has been recognized by Leapfrog’s Hospital Safety Grade A and by Modern Healthcare as one of the Top 100 Best Places to Work in Healthcare. We have also been recognized as a Joint Commission Top Performer on Key Quality Measures®. Finally, by Medicare.gov as #1 in San Antonio and #6 in the entire nation. The hospital is 1 of only 102 hospitals to receive Medicare.gov’s 5-star rating. Join our team to be part of the innovation. "The great hospitals will always put the patient and the patient's family first, and the really great institutions will provide care with warmth, compassion, and dignity for the individual."- Dr. Thomas Frist, Sr. HCA Healthcare Co-Founder If you are looking for an opportunity that provides satisfaction and personal growth, we encourage you to apply for our IR Tech PRN opening. We promptly review all applications. Highly qualified candidates will be contacted for interviews. Unlock the possibilities and apply today! We are an equal opportunity employer. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Join Our Mission At Resort Lifestyle Communities (RLC), serving seniors isn’t just a job, it’s a calling. When you join our team, you become part of a close-knit, servant-hearted community guided by our Core Values: Respect, Honesty, Kindness & Compassion, and Service Excellence. Together, we work toward four essential goals that guide our success: • Happy Employees, • Happy Residents, • Full Occupancy, • On-Budget Operations About the Role As our Sous Chef, you’ll play a vital role in creating moments that matter for our residents. You’ll ensure smooth, efficient, and safe kitchen operations while maintaining high standards of quality and cleanliness. Beyond cooking, you’ll help turn meals into meaningful experiences, building connections with residents and team members to make every dining moment feel special. What We’re Looking For, • Must be at least 21 years of age or older., • Flexibility: Your primary schedule is lunch and dinner Tuesday-Saturday. Additional availability is needed to support holidays and events., • Previous leadership in culinary preparation and cooking preferred., • High school diploma or equivalent (GED) required; culinary degree or other higher education preferred., • Basic computer skills required; data entry experience preferred. Key Responsibilities, • Own the quality and presentation of every dish while showcasing your culinary skills by preparing a wide variety of meats, seafood, poultry, vegetables, and other items using diverse cooking methods such as broiling, grilling, frying, and sautéing., • In the Executive Chef’s absence, you will step in to provide leadership, guiding the culinary team and preparing scratch-made dishes that are not only flavorful and beautifully presented but also personalized to residents’ preferences., • Play a key role in resident satisfaction by assisting and helping train team members using structured RLC training programs., • Maintain clean, sanitary, and well-stocked workstations and Chef’s Pantry for smooth meal service; receive, handle, store, and rotate products properly to ensure freshness, safety, and presentation., • Monitor and log food, refrigeration, and dish machine temperatures; follow closing checklists and assist other team members., • Actively participate in meetings, share innovative ideas, and respond to feedback professionally to enhance the dining experience. Benefits for Full-Time Employees, • Competitive compensation and benefits, • Access your pay anytime, • $341 benefit stipend per pay period to apply toward:, • Health, Dental, Vision, • Life Insurance, • Short- & Long-Term Disability, • HSA, FSA, LSA, • Accident & Hospital Indemnity, • Legal & Identity Theft Protection, • Paid Time Off, • 401(k) with employer match Why RLC?, • Fast-growing, family-owned company with 60+ communities nationwide., • Supportive leadership in a beautiful, resort-style environment., • A purpose-driven role where you make a difference every day. Ready to Create with Heart? Bring your servant heart to a place that feels like family. Apply today, and our Team will follow up soon! EOE/ADA #urgent

As a Patient Care Technician (PCT) at US Renal Care, you will be an integral part of a cross-functional team providing care and delegated activities of treatment to patients. The PCT will work under the supervision of a Registered Nurse (RN) or Charge Nurse (CN) for patients with renal failure. Patient care. You will work directly with patients to provide safe, comfortable, and high-quality dialysis treatment. Responsibilities include gathering patient stats before and after treatment, initiating treatment, monitoring patients during treatment, terminating treatment, and collecting patient blood samples per physician orders. Technician Duties. You will ensure quality comes first by preparing machines for hemodialysis treatments, cleaning and disinfecting machines after treatment, and conducting machine safety checks and logging results for quality control, ensuring all protocols and regulations are followed. Safety and Quality. You will use appropriate safety measures, including personal protective equipment. Working under the supervision of a Charge Nurse, you will adhere to all company policies, procedures, and state/federal laws and regulations. You will participate in all required staff meetings and continuing education offerings. • High school graduate or equivalent., • Desire to work in healthcare and care for patients., • Previous healthcare experience in dialysis, phlebotomy, or as a CNA is a plus., • Must be comfortable mixing acids and bicarbonate according to protocol., • Ability to distinguish all primary colors. Other requirements • Successful completion of USRC training program approved by the Medical Director, including demonstrated competency; this includes successful completion of USRC training course in the theory and practice of hemodialysis within 8 weeks of hire., • CPR certification required within 90 days of hire or as required by the state. We're here to change the lives of people with kidney disease and shape the future of kidney care. We still have much work ahead. If you desire to make a positive impact in the life of others and pursue a fulfilling career in healthcare, we invite you to join our team at U.S. Renal Care! Are you with US? Apply today! All Full Time employees are eligible for the following benefits: * Medical / Pharmacy * Dental * Vision * Voluntary benefits * 401k with employer match * Virtual Care * Life Insurance * Voluntary Benefits * PTO All Part Time employees are eligible for the following benefits: * 401k with employer match * PTO

Champions Do More As one of the fastest-growing and most exciting brands in the industry, Crash Champions is the largest founder-led multi-shop operator (MSO) of high-quality collision repair service in the U.S. The company, which also operates the growing Crash Champions LUXE | EV Certified brand of highline and luxury EV repair centers, services customers at more than 650 state-of-the-art locations in 38 states across the U.S. Crash Champions was founded in 1999 as a single Chicago repair center by industry veteran and 2023 EY Entrepreneur of the Year Midwest award winner Matt Ebert . For more than 25 years, our vision has been anchored by the belief that delivering superior collision repair service is about People First. Welcome to Crash Champions. We Champion People. Responsibilities • Examines damaged vehicle and efficiently plans repair process., • Works and communicates with others on vehicle repair status., • Performs quality repairs while keeping on-time status in mind., • Makes decisions on repair vs. replace considering safety, cost, and cycle time., • Removes upholstery, accessories, electrical and hydraulic window operating equipment, and trim to gain access to vehicle and fenders., • Participates in all required safety meetings., • Files, grinds, and sands repaired surfaces, using power tools and hand tools., • Directs the work of an apprentice in the performance of tasks when needed, i.e., unusual problems or questions and explains procedures to assistant. Qualifications • Ability to use frame machine., • Certification in body repair preferred., • Knowledge of vehicle repair process by manufacturer., • I-CAR welding certified., • Skill in analyzing and interpreting measuring data., • Ability to supervise repair personnel., • Must be able to pass thorough background check Benefits The Company offers the following benefits for this position, subject to applicable eligibility requirements and annual updates: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Group Life Insurance, • Disability Insurance, • 401k Retirement Plan with match, • Referral Bonus (“Cash From Crash”) This position is paid on a commission/ flag rate structure. Flag pay is guaranteed to meet local minimum wage requirements for all hours worked each week. The compensation range listed is the average flag pay range for a typical full-time employee in this position. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Submit a Referral Posted Min Pay Rate USD $65,000.00/Yr. Posted Max Pay Rate USD $162,720.00/Yr. ID 2026-20059 Category Body Technician Position Type Regular Full-Time Location : Postal Code 78228 Location : Address 5003 Wildflower Drive Remote No Posted Min Pay Rate USD $65,000.00/Yr. Posted Max Pay Rate USD $162,720.00/Yr. Prioritization Tier 1 – Priority

Job Description * * Job Descriptions - Human Resources Department Position: Operations Manager Department/Campus: Campus Reports to: Principal FLSA Status: Exempt Pay Grade: Band 5 Job Type Full Time Work Hours Normal School hours JOB GOAL The School Operations Manager is responsible for assisting the School Principal with assigned responsibilities to ensure that all students meet or exceed the State Standards by implementing the policies, regulations and procedures of the School Board. Inherent in the position are the responsibilities for general operations of the school. POSITION QUALIFICATIONS: • Bachelor’s Degree from an accredited college or university, or a minimum of 2 years SST Schools experience. DUTIES AND RESPONSIBILITIES: • The maintenance of the school building, • Make sure that Attendance is taken according to the policies and procedures everyday, • Purchase materials and supplies for the school, • Be responsible for child nutrition programs and its implementation according to rules and regulations, • Oversee timely and accurately processing of free/reduced lunch applications, • Oversee student withdrawal process and its proper documentation, • Supervise office staff to make sure they fulfil their duties and responsibilities, • Arrange bus transportation for certain school events, • Be responsible for after school snacks, • Maintain valid building permits, • Gather quotes for improvements, • Oversee registrar in admission of new students and re-enrollment of current students, • Oversee registrar in maintaining student’s files, • Oversee registrar for timely processing of Records/T-rex requests, • Help principal in preparation for the Lottery, • Ensure timely completion of work orders from school principals and administrative office for building and ground maintenance and construction work., • Regularly review assignment of job priorities and work orders with foremen., • Keep accurate record of materials ordered or readily available., • Assign work schedules of renovation, remodeling and repairs of school district building and ground facilities., • Accurately estimate cost of projects., • Coordinate district budget requests and projected district-wide maintenance and construction needs with district officials., • Appropriately requisition district expenditures for building and ground maintenance and repair work., • Suggest and implement an effective program for upgrading district facilities., • Be familiar with the financial procedures and policies manual, help correct compliance issues before delegating to central office., • Being able to use the accounting software effectively, • Be able to pull and interpret reports to keep track of school’s financial status., • Oversee the school’s purchasing/procurement process (requisition, purchase order, receiving goods and services, invoice processing), and work with related people as needed., • Make sure the campus work with the vendors that provide the most competitive pricing for commonly purchased items, and the best value is obtained., • Overseeing and ensuring that the vendors are paid timely and clean credit history is maintained., • Process reimbursements timely., • Prepare and submit monthly payroll change forms (time sheets, insurance paperwork, etc.), • Maintaining current agreements for all contracted services. Following bidding process as necessary., • Be responsible for the activity fund. Oversee the deposits, withdrawals, and monthly reconciliations. Encourage fundraising activities campus-wide. Oversee uniform sale., • Maintaining time and effort documents, and submitting timely to the central office. Being familiar with grant programs’ allowable activities, and resolving issue as possible before sending documents to the central office., • Helping the principal in the development of the Campus Improvement Plan (CIP), being familiar with the budget items listed., • Be familiar with the grant budget/balance, and provide regular information to the program stakeholders in order to assure timely spending., • Maintain/oversee maintenance of purchase orders (PO); clean-up cancelled/unused items, fulfill used ones in order to help with accurate forecasting of future expenditures., • Coordinate correction/reclassification of grant expenditures with the grants department., • Inform grants department immediately regarding position/duty changes of grant paid employees., • Ensure timely completion of work orders from school principals and cluster office personnel for finance related work., • Make sure that an accurate record of financial transactions is kept orderly and readily available for review in soft and hard copy format contemporarily., • Responsible for sorting, distributing and uploading receipts-invoices for the cluster accountant in the cluster office., • Work directly with the school secretary to adequately achieve the finance department's goals and objectives., • Prepare materials (e.g. Activity fund monthly reconciliation, reports analyses, collect revenue in compliance with accounting procedures, etc.) for the purpose of documenting activities, making presentations and/or providing supporting materials for requested actions., • Prepare monthly activity fund reconciliation according to Activity fund guideline., • Review daily cash receipts., • Communicate with the payroll department regarding issues about employees’ payroll (employee shall under any circumstances not contact the payroll department directly), • Review and approve timesheets for non-exempt employees on bimonthly basis, • Keep records of extra duty payments for exempt employees, • Keep records of work days for substitute teachers, • Submit exempt employees’ extra duty and substitute teacher records on monthly basis with the Principals approval (currently submitted on paper based Payroll Change Forms, will be converted to online format), • Review the paystubs each month and check extra duty payments, active employees, and terminated employees, • Enter stipend payment information for qualified teachers on the HR Portal, • Enter leaves for employees with absences on the HR Portal, • Communicate with payroll department about payroll related issues, • Review and approve timesheets and payroll change forms, • Performs other job-related duties as assigned. SKILLS AND ABILITIES: • Ability to communicate effectively in both written and oral forms with all levels of management, both internal and external to the district., • Ability to establish and maintain effective working relationships both internal and external to the district., • Ability to organize special programs for assigned location(s)., • Ability to use computer including software, database used by the district, spreadsheet and word processing software, calculator, copy machine and telephone., • Ability to analyze data, • Ability to use effective interview techniques, effective public speaking skills, and problem-solving skills WORK ENVIRONMENT AND PHYSICAL REQUIREMENTS: • Light Work: may require occasional light lifting., • Position is in office setting and may involve prolonged work at a desk in one location., • Moderate travel is required.

Job Description Position Summary: We are seeking a highly skilled and proactive CNC Maintenance Technician to join our manufacturing team. The CNC Maintenance Technician is responsible for troubleshooting, repairing, and maintaining CNC Lathes and Vertical Turret Lathes (VTLs) with Fanuc controls. This includes resolving mechanical, electrical, programmatical, and hydraulic issues, as well as performing preventive maintenance. This role will also support other facility and production equipment maintenance when CNC-related work is not required. The CNC Maintenance Technician will participate in training activities and support knowledge transfer as part of IPP’s Knowledge Sharing Program. This is a hands-on, working position requiring heavy use of tools and on-call availability. Essential Functions: • Diagnose and resolve program communication issues between CNC machines and network systems., • Troubleshoot Fanuc control alarm codes, program errors, and parameter faults., • Assist with program backups, edits, and restoration of control settings., • Perform mechanical maintenance on components including ball screws, spindles, gearboxes, and tool changers., • Conduct inspections and repairs on mechanical failures including axis movement, backlash, and lubrication issues., • Diagnose and repair electrical systems such as motors, servo drives, encoders, relays, I/O modules, and wiring harnesses., • Perform voltage checks, continuity testing, and component replacement using diagnostic tools., • Inspect and service hydraulic and pneumatic systems including pumps, valves, cylinders, solenoids, and hoses., • Execute preventive maintenance routines including lubrication, coolant checks, filter replacement, and system calibration., • Maintain accurate service logs and maintenance records., • Interpret technical documents, wiring diagrams, and machine schematics., • Assist in equipment installations, upgrades, and retrofits as directed., • Maintain compliance with all OSHA regulations and internal safety policies., • Maintain a clean, safe, and organized work area., • Provide support to the broader Maintenance Team., • Perform maintenance on production equipment and systems beyond CNC scope as directed., • Participate in knowledge transfer activities with fellow technicians., • Offer flexible availability for after-hours and weekend support when necessary. Education & Experience: • High school diploma or GED preferred, technical certification a plus., • Minimum 2 years of experience troubleshooting and maintaining CNC Lathes and VTLs., • Strong working knowledge of Fanuc controls and CNC machine diagnostics., • Experience in hydraulic, pneumatic, and electrical systems maintenance., • Experience maintaining and troubleshooting other industrial equipment is a plus. Knowledge, Skills, and Abilities: • Proficient in interpreting electrical and mechanical schematics., • Skilled in using diagnostic tools such as multimeters, pressure gauges, and test probes., • Strong problem-solving skills and technical knowledge., • Ability to work independently and prioritize multiple tasks., • Strong organizational and documentation skills., • Management of tools required to perform assigned duties., • Forklift, crane, and scissor lift operation experience preferred., • Availability to support after-hours operations and occasional weekends. Physical Conditions: • Must be able to lift 75 lbs., bend, kneel, and climb onto and under equipment., • Regular exposure to temperature extremes and industrial environment., • Use of PPE and adherence to safety standards required. Note: This job description outlines the primary responsibilities and requirements for the position and is not intended to be an exhaustive list. Duties may be added or modified as needed to support company objectives. Equal Opportunity Employer: We are an equal opportunity employer and welcome applicants from all backgrounds and experience to apply. Job Type: Full-time Benefits: Work Location: In person Company DescriptionImproved Piping Products, Inc. (IPP) was founded in 1979 and is a privately held family business. Our Production plant, Corporate Offices, and Warehouse are all located in San Antonio, Texas. IPP's fittings are sold to customers world-wide in various industries.Improved Piping Products, Inc. (IPP) was founded in 1979 and is a privately held family business. Our Production plant, Corporate Offices, and Warehouse are all located in San Antonio, Texas. IPP's fittings are sold to customers world-wide in various industries.

Job DescriptionImmediately hiring a CNC Maintenance Technician for a machine shop on the north side of San Antonio. The CNC Maintenance Technician will be responsible for maintenance, troubleshooting and servicing of CNC equipment and other industrial production equipment. Position requires proficiency in vertical and horizontal mills, lathes, three, four, and five axis mills. Pay is up to $30/hr. depending on experience Shift is Mon-Thurs 7am-6pm, Fri 7am-3pm Duties: • Performs troubleshooting and repairing of machining equipment and related equipment that performs milling, drilling, and grinding functions., • Analyzes, troubleshoots and repairs a variety of CNC and multi-purpose electronic and/or electro-mechanical control systems for industrial and precision equipment., • Tests, analyze malfunctions, modifies, repairs, adjusts, and maintains mechanical portions of automatic control instruments and related recording devices used in the operation of industrial manufacturing equipment., • Operates machines through necessary cycles to check mechanical portion of electronic and/or electro-mechanical systems and detects any variations from specifications., • Analyzes results of the tests to locate and determine the cause of the malfunction., • Modifies and adjusts settings to related equipment in order to properly align mechanical systems., • Repairs faulty components, re-tests system or systems as necessary., • Utilizes various electrical and mechanical measuring equipment and conducts operational tests as necessary., • Manage historical records of operation and repair for life-cycle management of the assets.Requirements:, • High School or equivalent technical degree from accredited Vocational School., • Minimum 5 years equipment maintenance experience, preferably with Mazak CNC mills and lathes., • Position requires physical dexterity and handling of equipment and hardware that often exceeds 50lbs.Please call/text 210-664-2680 #vipstaffing#zrsat

Job Description Facility Technician QUALIFICATIONS: To perform this job satisfactorily, an individual must be able to perform each essential performance requirement satisfactorily. The requirements listed below are representative of the training, experience, knowledge, and skills required for this job. Reasonable accommodation may be made to enable an individual with disabilities to perform the essential functions listed above. Education/Training/Experience: • High school diploma or equivalent., • At least one (1) year of facility maintenance experience required., • Knowledge of facilities management for multiple locations., • Knowledge of grounds care., • Knowledge of basic construction techniques., • Ability to use hand tools, power tools, power washer, painting equipment and related items, and extension ladder to height of 15 ft., • Proper use of safety equipment (PPE) to include goggles, safety shoes, face shield, long sleeve shirt, hat, dark glasses, leather apron and other items required by manufacturer equipment suggestions., • Product knowledge of the following: panic hardware, door and door frames, flooring, painting, minor electrical, suspended ceiling install/repair, lawn care, hand tools, power tools, cabinet repair, electrical water heaters, dish machine maintenance., • Ability to read a map and formulate routes for deliveries., • Ability to use email for correspondence and work orders., • Must have reliable transportation., • Proficiency in use of 16’ trailer to include towing, backing, loading of equipment, and hooking/unhooking preferred., • Fluent in English and Spanish (read, write, and speak) desirable., • Staff will be required to submit proof of their vaccination status or may request to be exempt from vaccination due to a religious and/or medical accommodation, • Certificate or license, as applicable, by the appropriate State agency as a qualified practitioner., • State of Texas vehicle operator’s license and proof of liability insurance., • Ensures that clients have access, as needed, to all five pillars of the social determinants of health with a trauma informed lens through Agency services and/or community partners., • Inspect and provide grounds care to include mowing, trimming, debris removal, lot stripping, playground surface maintenance, tree trimming, and power washing as required., • Inspect and provide repairs and general maintenance for the use of space and facilities to include water heaters, ceiling, A/C filters, dish machine supply, sinks, lavatories, wall repair, door repair, lockset repair, panic hardware repair, light fixture repair, and ballast replacement., • Assist with equipment installation and preventative maintenance., • Perform building inspections to meet Quality Assurance and Agency reporting; and detect and report defective materials or questionable conditions to the Manager, Facilities., • Responsible for delivery and distribution of mail and various purchased items to the satellite centers, schools and offices supported within the Agency., • Maintain work areas and equipment in a clean and orderly condition and follows prescribed safety regulations., • Attend agency staff and support meetings as required., • Maintain good relationships with stakeholders (including current and potential clients, community and co-workers) focusing on providing excellent and culturally sensitive customer service and always presenting a positive image of the agency., • Maintain a working environment which encourages mutual respect, promotes respectful and congenial relationships between employees and is free from all forms of harassment., • Perform other duties as assigned, including presentations to community groups and organizations, in accordance with the agency’s “team” philosophy. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. 41 CFR 60-1.35(c) Company DescriptionEmpowering individuals and families to transform their lives and strengthen our communities.Empowering individuals and families to transform their lives and strengthen our communities.

Job DescriptionImmediately hiring Industrial Maintenance Technicians for a large manufacturing plant on the southside of San Antonio. Pay is up to $30/hr. based on experience and shift 12HR AM: 615am – 630pm12HR PM: 615pm – 630am Industrial Maintenance Tech duties: • Diagnose, troubleshoot, and repair manufacturing production machinery and systems, • Conduct scheduled preventative maintenance to prevent downtown and streamline production process, • Maintain and update maintenance records and work orders using the CMMS system., • Identify recurring issues and assist in developing root-cause analysis and corrective actions., • Extensive hands-on work with control panels, high-voltage circuits (up to 480V), and transformers, • Perform repairs and preventive maintenance on motors, drives, gearboxes, pumps, actuators, and conveyors, • Locate and identify faults and/or hazards, repair as required, • Troubleshoot and repair control circuits, sensors, relays, VFDs, and PLC-controlled systems, • Wire, build, and modify electrical control panels according to schematics and engineering drawings, • Inspect, test, and replace transformers, breakers, fuses, and wiring harnesses, • Run hydraulic hoses, repair leaks as necessary and run electrical conduit throughout production floor, • Read and interpret electrical schematics, wiring diagrams, and PLC ladder logic, • Testing systems using multimeters, meggers, oscilloscopes, and other electrical diagnostic tools, • Perform post-repair audits to ensure safety features are functional, • Contribute to automation and controls maintenance projects as a critical member of the Maintenance Department, • Perform calibration, parameter adjustments, and software backups on CNC controllers and HMIs, • Collaborate with automation engineers to install and commission new CNC and robotic systems, • Diagnose issues with CNC machine control systems including Pilot Bench Machine, Ellis Drill Press, Allen-Bradley, and similar machinery/platforms.Requirements:, • Seeking at least 4 yrs. Industrial Maintenance or Manufacturing Maintenance experience, • Electrical and mechanical background is preferred, • Ability to document maintenance logs and write electrical maintenance reports, • Proven experience with mechanical systems including hydraulics, pneumatics, bearings, conveyors, and pumps, • Must be able to read and interpret technical and electrical blueprints/drawings, • Proficient in use of multimeters, meggers, and oscilloscopes, • Adhere to all electrical and machine safety protocols, including proper PPE, and lockout/tagout proceduresPlease call/text 210-664-2680 #vipstaffing#zrsat

Job Description DESCRIPTION The SSD Technician is responsible for the installation, adjustment and maintenance of all types of detention related equipment. RESPONSIBILITIES • Install and maintain equipment including, but not limited to, cylindrical, mortise, and rim locks, motor and manually driven detention equipment, detention locks, slider service and maintenance, • Install and maintain frames, doors, hardware, locks, sliders, furniture and door closers, • Install wire mesh, security ceilings and wall panels, • Install glazing and caulking, • Plan, install, service and test mechanical and electronic locking systems, • Make emergency repairs to detention and security locking systems, • Layout detention equipment for proper locations from construction documents and shop drawings, • Handle and distribute construction materials including doors, frames, glass, hardware, steel furniture and steel assemblies, • Troubleshooting hardware and Mechanical problems associated with Detention, • Be available for on call assignments, • All other related duties as assigned or required by Service Manager and/or Coordinator, • Open, repair and change the combination of all types of locking devices and makes keys for same, • Repair and maintain all types of doors, door closers, exit devices, panic hardware and related hardware, • Operate manual key coding/cutting machine, • Log keys that are issued and returned, • Assist with building maintenance tasks, such as plumbing, electrical or other essential building functions, • Lift up to 50lbs, • Communicate regularly and effectively as appropriate, • Maintain the standards, culture and values of CML Security, • High school diploma or GED required, • 3 Years of related experience preferred, • Welding experience preferred, • Alarm tech- intrusion systems preferred, • CCTV experience preferred, • Door access control preferred, • Data cable installations preferred, • Electronics experience preferred Pay: $25-$50 an hour Expected fill date: Ongoing hiring into 2026 Employment may be contingent upon successful completion of a background check and drug screen Company DescriptionOur team works alongside General Contractors and Architects to provide the best solutions for construction and design of detention facilities, often helping owners narrow down particular solutions needed for their individual project. Total Rewards include wages, eligibility for the company’s bonus program, medical insurance benefits, as well as more unique programs, including a 401k match, fitness reimbursement, tuition reimbursement, cell phone provider discount, employee referral bonus, employee assistance program, Elevations Credit Union membership, CML apparel reimbursement and access to CML’s Top Golf platinum membership. CML is an Equal Opportunity Employer We promote a safe workplace and provide regulatory compliance training as well as CML offers safety credential advancement.Our team works alongside General Contractors and Architects to provide the best solutions for construction and design of detention facilities, often helping owners narrow down particular solutions needed for their individual project.\r\n\r\nTotal Rewards include wages, eligibility for the company’s bonus program, medical insurance benefits, as well as more unique programs, including a 401k match, fitness reimbursement, tuition reimbursement, cell phone provider discount, employee referral bonus, employee assistance program, Elevations Credit Union membership, CML apparel reimbursement and access to CML’s Top Golf platinum membership.\r\n\r\nCML is an Equal Opportunity Employer We promote a safe workplace and provide regulatory compliance training as well as CML offers safety credential advancement.

Job Description Make a Difference in YOUR Career! Our vision is both simple and ambitious: to put our drinks on every table. We are the leading global independent beverage solutions provider. We serve a broad range of national and international retailers as well as Global, National and Emerging (GNE) brands. Our products are distributed worldwide from our production sites in Europe, North America, and Australia. Although our own branding may not appear on the labels of the beverages we produce, there is a good chance you are reading this while sipping one of our drinks. Our ambition is to continually improve, and it’s what keeps us at the top of our game. We are solutions-based. We are innovative. We seek out new challenges and conquer them. This is our company ethos, but it’s our people’s too: Refresco is at the cutting edge of a fast-moving industry because we have passionate people pushing the boundaries of what’s best. Stop and think: how would YOU put our drinks on every table? Essential Job Functions: • Adhere to all health and safety policies/procedures, Good Manufacturing Practices (GMPs) and wear the required personal protective equipment (PPE) while in the warehouse or production areas (including but not limited to hairnets/beard nets, safety glasses, hearing protection, steel toe boots and seatbelts while operating forklifts), • Responsible to adhere to food quality and food safety as per quality standards and/or Safe Quality Food requirements., • Follows department plans and performs complex corrective and preventative maintenance requiring a thorough knowledge of mechanical theories and principles., • Assist in ensuring all upgrades for equipment are compliant with Occupational Health & Safety Act., • Minimize down time ensuring replacement/spare parts are available through proper preventative maintenance management by adhering to manufacturer’s guidelines., • Assist in scheduling maintenance personnel to cover production line maintenance needs., • Contributes to measurable improvements in scheduled, unscheduled and break down maintenance related down time and the costs associated with these events to contribute to CPC (cost per case) goals for each plant and shares best practices across and within the enterprise., • Review daily preventative maintenance (PM) sheets and assist in ensuring work is being completed., • Review any changes made to production line and make necessary changes to work orders., • Coordinate and address equipment failure in a timely manner, in order to minimize the downtime., • Support Electricians and Mechanics with machine issues on the production floor., • Assist in training of Electricians/Mechanics on production equipment and maintain Lockout/Tag out Program., • Coordinate parts requirement with Parts Coordinator., • Participate in Continuous Improvement Projects, and support initiatives with technical expertise. Required Skills: • Thorough technical knowledge in the field of industrial maintenance, including relevant regulations, standards and codes., • Understanding of maintenance practices., • Objective judgment and fact-based decision-making approach., • Initiate the escalation process when downtime exceeds plant targets and issue is unresolved., • Participate in Continuous Improvement projects, and support initiatives with technical expertise., • Proficient in SAP. Competencies: • Multi-Tasking Ability: Skilled at managing multiple tasks simultaneously while maintaining attention to detail and efficiency., • Proactive and Self-Motivated Problem Solver: Takes initiative to identify and resolve issues independently, making decisive choices and managing tasks effectively without supervision., • Customer-Focused Adaptability: Prioritizes internal customer needs and adapts to the dynamic demands of the business., • Communication: Clear and concise communication with production staff and management., • Problem-Solving Skills – ability to troubleshoot machinery and production issues efficiently, collaborating with others to resolve complex issues, adaptability to changing circumstances and willingness to implement new procedures., • Minimum high school diploma or equivalent required., • Electrician or Millwright (Dual Ticket – Electrician/Millwright an asset)., • 3-5 years production/line machine maintenance experience required., • Line maintenance within a food and beverage production environment preferred. Working Conditions: • Work Schedule: Weekdays, weekends, afternoon, evening, and overnight may be required. Overtime scheduled as needed., • Work Environment: Operating in a fast-paced production plant with numerous moving parts. Noise levels require hearing protection and temperatures can get very hot and/or relatively cold). The environment is structured and supervised. Travel Requirements: • Travel anticipated: Rarely Physical Requirements: R = Rarely (0-15%) O = Occasionally (16-45%) F = Frequently (46-100%) Physical Demand R O F Stand or Sit X Stoop, kneel, crouch, or crawl X Lifting 50 lbs. (minimum lbs. lifted 5 lbs.) X Carry weight, lift X Walking X Driving X Climb (stairs/ladders) or balance X • Visual/Sensory: This position requires attention to detail, requiring attention with one or two senses at a time., • Coordination and Dexterity: Excellent hand-eye coordination and manual dexterity for precise control of equipment., • Mental Stress: There is pronounced pressure from deadlines, production quotas, accuracy, or similar demands. Other Duties: • This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. A Career with Refresco Refresco Beverages US, Inc. offers competitive pay and comprehensive benefits, which include: • Medical/Dental/Vision Insurance, • Health Savings Accounts and Flexible Spending Accounts, • Life and AD&D Insurance, • Pet Insurance, • Legal Benefits, • 401(k) Savings Plan with Company Match, • 12 Paid Holidays, Vacation, and Paid Time Off, • Well-being Benefits, • Discount and Total Reward Programs Join Refresco TODAY and enjoy a rewarding CAREER! Any employment agency, person, or entity that submits a résumé to this career site or a hiring manager does so with the understanding that the applicant's résumé will become the property of Refresco Beverages US, Inc. Refresco Beverages, US Inc., will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person, or entity. Employment agencies that have agreements with Refresco Beverages US, Inc., and have been engaged in a search shall submit a résumé to the designated Refresco recruiter or, upon authorization, submit a résumé to this career site to be eligible for placement fees. Refresco Beverages US, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity, gender expression, Veteran status, or any other classification protected by federal, state, or local law Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job DescriptionGlazing Saddles, Krispy Kreme A cashier is on the front line of the Krispy Kreme doughnut experience--keeping the customers happy and the store running smoothly. You make the magic happen by taking dozen orders, making coffee and working the cash register--and all with a smile. This position requires a friendly, outgoing personality and the ability to multitask on busy days (and nights!) Overview of Position: A Retail Cashier/Doughnut Decorator exceeds customer expectations by providing fast, genuinely friendly customer service and by ensuring doughnuts are fresh and meet company standards of “Freakin’ Awesome Doughnuts”. Experience isn’t necessary, but a great attitude and a smile are. If you are friendly, we can train you in our procedures and processes. They demonstrate competency in a variety of store practices and procedures and adhere rigorously to store standards. If you are high energy, clean and love to work in a teamwork environment this job may be a great fit for you. A commitment to teamwork, a clean and professional appearance, enthusiasm, and a high energy level are necessary throughout the shift. Position Responsibilities: • Greet customers as quickly as possible with a sincere smile and listen carefully to their needs., • Maintain a pleasant and courteous demeanor., • Fill customer orders quickly and accurately, including products, condiments, and change., • Record customer product selections in the Point of Sale system efficiently and accurately., • Follow all company established cash handling procedures including checks, cash, receipts, and credit cards., • Inspect all doughnuts and remove any that are misshapen, too small, or otherwise imperfect. Be our last line of defense for Quality Assurance., • Apply fillings, icings, and other toppings following Krispy Kreme product specifications., • Stock and rotate product on carts, filling and icing hoppers and display cases to ensure freshness and proper appearance., • Consistently model all store policies, standards, and practices., • Fulfill wholesale orders by packaging, dating, and safety sealing the product., • Be familiar with the operations of all front-of-the-house equipment. Espresso machine, coffee equipment, commercial oven, chiller machine., • Bake assorted pastry items using a commercial oven., • Work to minimize waste as much as possible., • Help us raise funds thru our cause marketing efforts that help non-profit organizations., • Learn and share key facts about Krispy Kreme and the Hot Light story to customers., • Host birthday party events, family night activities, and conduct school Krispy Kreme factory tours., • Practice "clean-as-you-go" techniques to maintain a clean work area. Everything we do is visible!, • Company provides uniform of 1-Cap, 1-Tee Shirt, and 1-Apron to an employee to be worn during shift. Employee must wear blue jeans (no holes, washout or rips) and black belt. Non-slip shoes must be worn at all times. Maintain a clean, neat Glazing Saddles issued uniform at all times., • Exhibit suggestive selling behavior such as: additional dozens, up-selling larger sizes, special promotions., • Thank customers for their purchase and encourage a return visit., • Demonstrate safety consciousness always and report all incidents to a supervisor., • Assist in maintaining a high level of store sanitation and cleanliness., • Follow all Krispy Kreme standards for Food Safety Program and HACCP Plans., • Report any equipment failure or issues to supervisor in a timely manner., • Report suspicious employee/customer behavior to a supervisor., • Perform other related duties as assigned. Essential Skills and Experience: • Pleasant disposition, friendly, sociable, accommodating nature, and enthusiastic, • Customer Service skills, • Must be able to read and communicate using the English language, • Ability to make simple mathematical calculations, • Ability to handle difficult customer situations professionally Valued but not required skills and experience: • Food Service experience, • Hot Schedules experience, • Bakery/Cake decorating experience Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing duties of the job, employee is occasionally required to stand, walk, climb; handle objects, tools or controls; reach with extremities; hear, see and communicate with employees and customers. Must be able to lift up to 50 pounds, occasionally overhead; push or pull carts up to 100 pounds. Must be able to fill two (2) doughnuts at one time.

Job DescriptionGlazing Saddles, Krispy Kreme A cashier is on the front line of the Krispy Kreme doughnut experience--keeping the customers happy and the store running smoothly. You make the magic happen by taking dozen orders, making coffee and working the cash register--and all with a smile. This position requires a friendly, outgoing personality and the ability to multitask on busy days (and nights!) Overview of Position: A Retail Cashier/Doughnut Decorator exceeds customer expectations by providing fast, genuinely friendly customer service and by ensuring doughnuts are fresh and meet company standards of “Freakin’ Awesome Doughnuts”. Experience isn’t necessary, but a great attitude and a smile are. If you are friendly, we can train you in our procedures and processes. They demonstrate competency in a variety of store practices and procedures and adhere rigorously to store standards. If you are high energy, clean and love to work in a teamwork environment this job may be a great fit for you. A commitment to teamwork, a clean and professional appearance, enthusiasm, and a high energy level are necessary throughout the shift. Position Responsibilities: • Greet customers as quickly as possible with a sincere smile and listen carefully to their needs., • Maintain a pleasant and courteous demeanor., • Fill customer orders quickly and accurately, including products, condiments, and change., • Record customer product selections in the Point of Sale system efficiently and accurately., • Follow all company established cash handling procedures including checks, cash, receipts, and credit cards., • Inspect all doughnuts and remove any that are misshapen, too small, or otherwise imperfect. Be our last line of defense for Quality Assurance., • Apply fillings, icings, and other toppings following Krispy Kreme product specifications., • Stock and rotate product on carts, filling and icing hoppers and display cases to ensure freshness and proper appearance., • Consistently model all store policies, standards, and practices., • Fulfill wholesale orders by packaging, dating, and safety sealing the product., • Be familiar with the operations of all front-of-the-house equipment. Espresso machine, coffee equipment, commercial oven, chiller machine., • Bake assorted pastry items using a commercial oven., • Work to minimize waste as much as possible., • Help us raise funds thru our cause marketing efforts that help non-profit organizations., • Learn and share key facts about Krispy Kreme and the Hot Light story to customers., • Host birthday party events, family night activities, and conduct school Krispy Kreme factory tours., • Practice "clean-as-you-go" techniques to maintain a clean work area. Everything we do is visible!, • Company provides uniform of 1-Cap, 1-Tee Shirt, and 1-Apron to an employee to be worn during shift. Employee must wear blue jeans (no holes, washout or rips) and black belt. Non-slip shoes must be worn at all times. Maintain a clean, neat Glazing Saddles issued uniform at all times., • Exhibit suggestive selling behavior such as: additional dozens, up-selling larger sizes, special promotions., • Thank customers for their purchase and encourage a return visit., • Demonstrate safety consciousness always and report all incidents to a supervisor., • Assist in maintaining a high level of store sanitation and cleanliness., • Follow all Krispy Kreme standards for Food Safety Program and HACCP Plans., • Report any equipment failure or issues to supervisor in a timely manner., • Report suspicious employee/customer behavior to a supervisor., • Perform other related duties as assigned. Essential Skills and Experience: • Pleasant disposition, friendly, sociable, accommodating nature, and enthusiastic, • Customer Service skills, • Must be able to read and communicate using the English language, • Ability to make simple mathematical calculations, • Ability to handle difficult customer situations professionally Valued but not required skills and experience: • Food Service experience, • Hot Schedules experience, • Bakery/Cake decorating experience Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing duties of the job, employee is occasionally required to stand, walk, climb; handle objects, tools or controls; reach with extremities; hear, see and communicate with employees and customers. Must be able to lift up to 50 pounds, occasionally overhead; push or pull carts up to 100 pounds. Must be able to fill two (2) doughnuts at one time.

Job Description Part Time/ Full Time positions available. Part Time Shift is 3pm-7pm. Candidates applying must have weekend and Holiday availability. Independence Hill is an upscale retirement resort located in the heart of the Stone Oak area. We are passionate about compassionate people and the care we provide our residents. Come join our team! Candidate will work in a restaurant-like setting, in a non-tipping environment, perfect for those seeking steady hours and income. Flexibility is essential in this role, including occasional weekends and holidays. Favorable working hours as no late nights are required. Essential Job Responsibilities • Prepare beverages before meals and serve beverage of choice to each resident., • Prepare foods assigned by the cook, using daily menus and for special events., • Set tables for upcoming meals and reset for the following meal., • Take orders from the residents and assist them as needed., • Inform residents what foods are available if they are unable to read menu., • Participate in plating and serving meals., • Provide customer service to residents to allow high level of resident satisfaction., • Know residents by name and their food beverage likes and dislikes., • Offer second helpings to residents who may desire more food., • Keep water glasses and coffee cups and/or carafes filled., • Clear tables, as needed, throughout meal and bus tables after the meal is finished., • Maintain confidentiality of verbal and written information pertaining to residents, community operations and personnel., • Report any on-the-job injuries to the supervisor before the end of the work shift on the day the injury occurs., • Other duties as assigned Education and Experience Required • Must be age 16 or older, • Ability to read, write and comprehend the English language Knowledge, Skills, and Abilities Required • Promote teamwork in providing services to residents., • State food-handling and kitchen regulations, • Operation of kitchen appliances (dishwasher, garbage disposal, microwave, coffee maker, ice machine, blender, food processor, meat slicer, mixer, etc.) and office equipment (FAX, photocopier, and telephone), • Working 3-3.75 hours standing, walking, and moving about without the need to sit down Preferred Qualifications • Willingness to learn and help others, • Enjoyment in working with older adults, • Some experience in food preparation is preferred, • Food Handlers Certificate Perks and Benefits: • Birthday & Anniversary PTO, • PTO accrual on Day ONE, • Referral Bonus, • Pay Advance Program, • Generous benefit offerings to include: Medical/ Dental/Vision/ Accident/ STD/LTD, • Employer paid Life policy, • Free meal during certain shifts

Job Description At TRDI, we proudly support the AbilityOne Program, a federal initiative dedicated to providing employment opportunities for individuals with disabilities. Through this program, we promote an inclusive and accessible workplace where employees receive the necessary accommodations and support to succeed. If you have a disability, we encourage disclosure so we can ensure you have the resources needed to thrive in your role Hourly Rate: $18.40 Schedule: TBD Must be able to work a flexible schedule to include weekends, evenings and holidays as needed. POSITION SUMMARY: The Cashier performs cashiering duties, including making cash transactions, verifying cash drawer, giving change, counting cash receipts and completing cash reports. May also perform general food service work. Maintains sanitation standards in the service and dining room area. The general responsibilities of the position include those listed below, but the organization may identify other responsibilities of the position. These responsibilities may differ according to business necessities and client requirements. PRIMARY DUTIES AND RESPONSIBILITIES: • Verify cash at beginning of shift., • Operate cash register, receives cash from customers or employees in payment for goods or services and records amounts received., • Computes or re-computes bills, itemized lists, and tickets showing amount due using adding machine or cash register, makes change, cashes checks and issues receipts or tickets to customers., • Control, organize, monitor, & maintain cash levels in drawer., • Prepares reports of transactions, reads and records totals shown on cash register tape and verifies against cash on hand., • May make credit card transactions and may be required to know value and features of items for which money is received., • May give cash refunds or issue credit memorandums to customers for returned merchandise, operate ticket-dispensing machine., • Complete customer purchases by scanning merchandise or inputting price into register quickly/accurately., • Ensure all items are input into cash registers and menu boards., • Ensure facility is opens 15 minutes prior to meal open., • Practices good sanitation techniques., • Ensure facility is secure at close of meal., • Comply with energy conservation and recycling programs., • Complies and follows appropriate Food Handlers Safety Components. Attends all allergy and foodborne illness in-service training. • Complies with all HACCP policies and procedures., • Reports all accidents and injuries in a timely manner., • Complies with all company safety and risk management policies and procedures., • Participates in regular safety meetings, safety training and hazard assessments., • Attends training programs (classroom and virtual) as designated., • Pass and maintain any required security clearance requirement and comply with Drug Free Workplace policy., • Adheres to Operations Security (OPSEC) standard operations procedures., • Adheres to Property Control Plan for management of Government Furnished Property (GFP). Adheres to the safety and health program that complies with EM 385-1-1 and applicable OSHA, DOD, Armed Forces Branch(s), Federal, state, and local safety, environmental and health requirements. • Maintain a site-specific Accident Prevention Plan (APP) in accordance with Appendix A, EM 385-1-1., • Other tasks as may be directed by the Project Manager/Supervisor. QUALIFICATIONS AND REQUIREMENTS: • Ability to communicate orally and in writing in a clear and concise manner., • Ability to maintain confidentiality of information., • Ability to make decisions and solve problems while working under pressure., • Detail oriented and strong organizational skills., • Must have experience as a cashier., • Must complete ServSafe Food Handler Certification within 30 days of employment., • Must be able to Work a Flexible Work Schedule. EDUCATION, SKILLS AND EXPERIENCE: • High school education or GED., • Experience using the ALOHA point of sale system preferred., • Ambitious and target focused with a drive to succeed., • Ability to manage time effectively and handle both internal and external conflicts. TRDI hires many individuals with and without disabilities, especially those that are transitioning out of the Armed Services:

Job DescriptionGlazing Saddles, Krispy Kreme A cashier is on the front line of the Krispy Kreme doughnut experience--keeping the customers happy and the store running smoothly. You make the magic happen by taking dozen orders, making coffee and working the cash register--and all with a smile. This position requires a friendly, outgoing personality and the ability to multitask on busy days (and nights!) Overview of Position: A Retail Cashier/Doughnut Decorator exceeds customer expectations by providing fast, genuinely friendly customer service and by ensuring doughnuts are fresh and meet company standards of “Freakin’ Awesome Doughnuts”. Experience isn’t necessary, but a great attitude and a smile are. If you are friendly, we can train you in our procedures and processes. They demonstrate competency in a variety of store practices and procedures and adhere rigorously to store standards. If you are high energy, clean and love to work in a teamwork environment this job may be a great fit for you. A commitment to teamwork, a clean and professional appearance, enthusiasm, and a high energy level are necessary throughout the shift. Position Responsibilities: • Greet customers as quickly as possible with a sincere smile and listen carefully to their needs., • Maintain a pleasant and courteous demeanor., • Fill customer orders quickly and accurately, including products, condiments, and change., • Record customer product selections in the Point of Sale system efficiently and accurately., • Follow all company established cash handling procedures including checks, cash, receipts, and credit cards., • Inspect all doughnuts and remove any that are misshapen, too small, or otherwise imperfect. Be our last line of defense for Quality Assurance., • Apply fillings, icings, and other toppings following Krispy Kreme product specifications., • Stock and rotate product on carts, filling and icing hoppers and display cases to ensure freshness and proper appearance., • Consistently model all store policies, standards, and practices., • Fulfill wholesale orders by packaging, dating, and safety sealing the product., • Be familiar with the operations of all front-of-the-house equipment. Espresso machine, coffee equipment, commercial oven, chiller machine., • Bake assorted pastry items using a commercial oven., • Work to minimize waste as much as possible., • Help us raise funds thru our cause marketing efforts that help non-profit organizations., • Learn and share key facts about Krispy Kreme and the Hot Light story to customers., • Host birthday party events, family night activities, and conduct school Krispy Kreme factory tours., • Practice "clean-as-you-go" techniques to maintain a clean work area. Everything we do is visible!, • Company provides uniform of 1-Cap, 1-Tee Shirt, and 1-Apron to an employee to be worn during shift. Employee must wear blue jeans (no holes, washout or rips) and black belt. Non-slip shoes must be worn at all times. Maintain a clean, neat Glazing Saddles issued uniform at all times., • Exhibit suggestive selling behavior such as: additional dozens, up-selling larger sizes, special promotions., • Thank customers for their purchase and encourage a return visit., • Demonstrate safety consciousness always and report all incidents to a supervisor., • Assist in maintaining a high level of store sanitation and cleanliness., • Follow all Krispy Kreme standards for Food Safety Program and HACCP Plans., • Report any equipment failure or issues to supervisor in a timely manner., • Report suspicious employee/customer behavior to a supervisor., • Perform other related duties as assigned. Essential Skills and Experience: • Pleasant disposition, friendly, sociable, accommodating nature, and enthusiastic, • Customer Service skills, • Must be able to read and communicate using the English language, • Ability to make simple mathematical calculations, • Ability to handle difficult customer situations professionally Valued but not required skills and experience: • Food Service experience, • Hot Schedules experience, • Bakery/Cake decorating experience Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing duties of the job, employee is occasionally required to stand, walk, climb; handle objects, tools or controls; reach with extremities; hear, see and communicate with employees and customers. Must be able to lift up to 50 pounds, occasionally overhead; push or pull carts up to 100 pounds. Must be able to fill two (2) doughnuts at one time.

Job DescriptionGlazing Saddles, Krispy Kreme A cashier is on the front line of the Krispy Kreme doughnut experience--keeping the customers happy and the store running smoothly. You make the magic happen by taking dozen orders, making coffee and working the cash register--and all with a smile. This position requires a friendly, outgoing personality and the ability to multitask on busy days (and nights!) Overview of Position: A Retail Cashier/Doughnut Decorator exceeds customer expectations by providing fast, genuinely friendly customer service and by ensuring doughnuts are fresh and meet company standards of “Freakin’ Awesome Doughnuts”. Experience isn’t necessary, but a great attitude and a smile are. If you are friendly, we can train you in our procedures and processes. They demonstrate competency in a variety of store practices and procedures and adhere rigorously to store standards. If you are high energy, clean and love to work in a teamwork environment this job may be a great fit for you. A commitment to teamwork, a clean and professional appearance, enthusiasm, and a high energy level are necessary throughout the shift. Position Responsibilities: • Greet customers as quickly as possible with a sincere smile and listen carefully to their needs., • Maintain a pleasant and courteous demeanor., • Fill customer orders quickly and accurately, including products, condiments, and change., • Record customer product selections in the Point of Sale system efficiently and accurately., • Follow all company established cash handling procedures including checks, cash, receipts, and credit cards., • Inspect all doughnuts and remove any that are misshapen, too small, or otherwise imperfect. Be our last line of defense for Quality Assurance., • Apply fillings, icings, and other toppings following Krispy Kreme product specifications., • Stock and rotate product on carts, filling and icing hoppers and display cases to ensure freshness and proper appearance., • Consistently model all store policies, standards, and practices., • Fulfill wholesale orders by packaging, dating, and safety sealing the product., • Be familiar with the operations of all front-of-the-house equipment. Espresso machine, coffee equipment, commercial oven, chiller machine., • Bake assorted pastry items using a commercial oven., • Work to minimize waste as much as possible., • Help us raise funds thru our cause marketing efforts that help non-profit organizations., • Learn and share key facts about Krispy Kreme and the Hot Light story to customers., • Host birthday party events, family night activities, and conduct school Krispy Kreme factory tours., • Practice "clean-as-you-go" techniques to maintain a clean work area. Everything we do is visible!, • Company provides uniform of 1-Cap, 1-Tee Shirt, and 1-Apron to an employee to be worn during shift. Employee must wear blue jeans (no holes, washout or rips) and black belt. Non-slip shoes must be worn at all times. Maintain a clean, neat Glazing Saddles issued uniform at all times., • Exhibit suggestive selling behavior such as: additional dozens, up-selling larger sizes, special promotions., • Thank customers for their purchase and encourage a return visit., • Demonstrate safety consciousness always and report all incidents to a supervisor., • Assist in maintaining a high level of store sanitation and cleanliness., • Follow all Krispy Kreme standards for Food Safety Program and HACCP Plans., • Report any equipment failure or issues to supervisor in a timely manner., • Report suspicious employee/customer behavior to a supervisor., • Perform other related duties as assigned. Essential Skills and Experience: • Pleasant disposition, friendly, sociable, accommodating nature, and enthusiastic, • Customer Service skills, • Must be able to read and communicate using the English language, • Ability to make simple mathematical calculations, • Ability to handle difficult customer situations professionally Valued but not required skills and experience: • Food Service experience, • Hot Schedules experience, • Bakery/Cake decorating experience Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing duties of the job, employee is occasionally required to stand, walk, climb; handle objects, tools or controls; reach with extremities; hear, see and communicate with employees and customers. Must be able to lift up to 50 pounds, occasionally overhead; push or pull carts up to 100 pounds. Must be able to fill two (2) doughnuts at one time.

Job Description Job Summary Will be transfering Sharps Containers and hazardous and non hazardous material throughout facility. Supports Waste Management Sustainability Services onsite program, including manual labor associated with medical waste, nonhazardous pharmaceutical waste, sharps and hazardous pharmaceutical waste collection, handling, packaging, transporting, and installing containers. Also, assisting when extra personnel are needed, and other duties as assigned. This is a position focused on hospital waste. I. Essential Duties and Responsibilities Ensure waste types are properly segregated, regulatory shipment windows are met, proper container labeling is adhered to, good housekeeping is maintained, and accurate tracking logs are kept. Identify best practices that assist customers in reducing waste volumes, increasing operational efficiencies, identifying optimal equipment usage, and generating cost savings. Perform labor intensive activities such as collecting waste throughout the facility. May provide support or direction to less experienced Technicians. Wears required personal protective equipment. Participates and cooperates in safety process, including following written procedures, attending required training and scheduled meetings. Immediately reports any unsafe conditions, incidents, injuries, or property damage to supervisor. Follows Environmental and Quality Management System (ISO 14001/9001) policy, procedures, and operational controls related to job responsibilities. Maintains compliance with applicable environmental, safety and transportation regulations (EPA, OSHA, and DOT). Displays good customer service and de-escalation skills. II. Supervisory Responsibilities This job has no supervisory duties. III. Qualifications The requirements listed below are representative of the qualifications necessary to perform the job. • Education: Associate's Degree (accredited), or in lieu of degree, High School Diploma or GED (accredited) and two (2) years of relevant work experience., • Certificates, Licenses, Registrations or Other Requirements: 24-hour HAZWOPER preferred. IV. Work Environment Listed below are key points regarding environmental demands and the work environment of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job: Required to use motor coordination with finger dexterity (such as keyboarding, machine operation, etc.) most of the workday. Required to exert physical effort in handling objects up to 30 pounds most of the workday. Required to exert physical effort in handling objects up to 50 pounds occasionally. Required to be exposed to physical occupational risks (such as cuts, burns, exposure to toxic chemicals, etc.) most of the workday. Required to be exposed to physical environment which involves dirt, odors, noise, weather extremes or similar elements most of the workday. Ability to perform tasks in inclement weather. Note: The level of physical effort may vary from site to site and in some cases be greater or less than documented here.

Job DescriptionCompany Description BMW of San Antonio, located in San Antonio, TX has immediate opportunities for technicians to become part of the BMW family! Job Description As a BMW Technician, you will be responsible for performing diagnoses, repairs, and maintenance work for customer and dealership vehicles. You’ll be at the forefront of innovative automotive diagnostic technologies. • Receiving and carrying-out Repair Orders as dispatched., • Performing diagnostic services and troubleshooting to determine repair needs., • Providing labor, time, and parts estimates for repair services., • Performing high quality and efficient repair services for various automotive systems, including engine, steering, suspension, brakes, and air conditioning in accordance with Center and Factory standards., • Performing Quality Control checks for repaired vehicles to ensure repairs are complete., • Completing all required paperwork and documentation for repair services., • Maintaining organized, clean workspace and accounting for dealership and personal tools at all times., • Communicating directly and efficiently with Service Advisors and Parts Department Employees., • Participating in continual BMW proprietary training/education programs to hone skills and develop expertise in industry-leading BMW automotive technologies and processes., • Demonstrating behaviors consistent with Employer's values in all interactions. You’re a passionate, skilled, and dedicated individual who is excited by the opportunity to work on The Ultimate Driving Machine. You’re highly self-motivated and detail-oriented with solid organizational and time-management skills. You’re excited about innovative technologies, ideally have previous European brand service repair experience, and are committed to Fix it Right the First Time to provide the ultimate customer experience. Qualifications • About You, • High school diploma or equivalent., • Possess great mechanical, electrical, and computing skills., • Be 18 years of age or older., • Own a valid driver’s license., • At least 2+ years previous of hands on automotive repair experience in a professional environment or equivelant., • Previous European automotive technician experience a plus, • ASE certifications a plus, • Must be authorized to work in the USA., • Must perform duties and responsibilities in a safe manner., • Must be able to demonstrate ability to pass pre-employment testing to include background check, MVR check, and maintenance of a valid driver's license. Additional Information All your information will be kept confidential according to EEO guidelines. #automotive #technician #mechanic #BMW #ASE

Job Description Would you like to work in a fun and exciting environment with unbelievable artifacts, fun interactives and room for career growth? Ripley Entertainment Inc. is a global leader in the attractions industry with more than 13 million people visiting our 95-plus attractions in 10 countries each year. JOB DESCRIPTION Position Title: Cashier Basic Function: A Cashier is responsible for maintaining Guest Service as per company standard, generating sales, cash register operations (POS), Moving Theater operations, housekeeping, and adherence to all Company Policy/Attraction standards. This position is part-time and may include shifts scheduled between 8am – midnight, every day of the year including holidays. Principal Responsibilities: • Ensure that each Guest receives outstanding Guest Service by providing a friendly environment which includes greeting and acknowledging every Guest, maintaining outstanding standards, museum exhibit knowledge and all other components of Guest Service., • Actively sell tickets, guidebooks, mirror maze glasses, and other retail items as assigned in a positive and friendly manner., • Accurately and efficiently complete all sales transactions and maintain proper cash and media accountabilities at POS registers., • Greet and load/unload Guests as they enter/exit the 7D Moving Theater, explain ride and safety rules, observe Guests while riding for any safety issues, and ensure the proper flow and control of crowds., • Maintain a clean and safe environment for our Guests and employees. Museum show quality and presentation should be maintained at the highest level., • Communicate Guest requests to management., • Adhere to all Company policies, procedures and practices, including safety., • Any other duties as assigned by management. JOB DESCRIPTION Position Title: Operations Associate Essential Skills / Requirements: • Proficiency in cash handling., • Ability to handle high levels of point-of-sale processing., • Must be energetic, courteous and professional., • Must be knowledgeable of all Ripley attractions., • Ability to retain information on all promotions, events, and discounts that affect ticketing prices., • Ability to operate and use all equipment necessary to run the store., • Ability to lift up to 50 pounds., • Ability to stand for periods of 7-8 hours., • Ability to bend, stoop, kneel in order to address machine needs (printer paper, ticket control, etc.)., • Must be able to perform the essential functions of the job with or without reasonable accommodation., • 0-2 years in a ticket sales background, preferably in the Attractions industry., • Excellent communication skills., • Working knowledge of point-of-sale and cash handling systems. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties, skills, or working conditions.

Job Description Quick Lube Service Technician Shottenkirk Toyota San Antonio Shottenkirk Automotive Group is family-owned and has been in business for over 60 years. We currently operate 27 Automotive Dealerships in 6 states and employ over 2,500 people. We believe culture makes a difference and we strive to build lasting relationships with our employees, customers, and the community. This role will mainly be focused on fluid checks and basic maintenance. Typically, a Quick Lube Service Technician will change a vehicle's oil, check the transmission fluid and other fluid levels, inspect various belts and filters, and check air levels and gauges. Responsibilities: * Test to check whether systems and components are secure and working properly * Isolate the systems or components that might have caused the problem * Drive the vehicle for testing purposes * Maintain efficiency and accuracy in diagnosing as well as repairing vehicles * Repair or replace worn parts ahead of the vehicle’s breakdown or damage * Use power tools, machine tools, and common hand tools to perform various tasks Requirements: * Ability to identify the problem quickly * Knowledge of automobiles * Strong reading, computer, and mathematics skills * Ability to learn new technology and repair and service procedures and specifications * Comfortable operating electronic diagnostic equipment * High school diploma or GED * Technical degree preferred * ASE certifications preferred * Minimum of 1 year in service department * Ability to lift 50 pounds and work on your feet for extended periods of time * Ability to work in a fast-paced environment * Basic computer skills * Positive, friendly attitude What we offer: • Relocation assistance for out of area candidates, • Competitive pay + bonus potential, • Ongoing training and career advancement opportunities, • Full benefits package: Medical, Dental, Vision, 401 (k) and paid time off, • Supportive leadership and strong team culture

Job Description Classification: Non-Exempt Reports to: Export Production Manager Company Overview Brook Valley Salvage is a family built salvage textile business that has grown to be one of the premier textile graders in the United States. Brook Valley Salvage processes many millions of pounds annually playing an important role in recycling and creating many micro economic opportunities and providing jobs in third world countries. Job Summary As a Brook Valley Export team member, your primary responsibility is to perform your duties according to company procedures and in a way that exceeds our customers’ expectations as their satisfaction is our #1 objective. Duties and Essential Job Functions: • Ensures smooth operation of baler, • Collects and stores scrap boxes suitable for cap sheets, • Assists in overall housekeeping throughout the warehouse, • Ties and removes all bales from baler, • Maintaining scrap boxes, • Maintain adequate supply of baling wire and shrink wrap to meet needs, • Maintain the cleanliness of bale press, • Overall housekeeping including mopping, sweeping and trash removal, • Position bales safely and per warehouse protocols for storage, • Ability to meet quotas as scheduled, • Ability to work in a fast paced environment, • Ability to communicate with floor supervisors and co-workers, • Demonstrated ability to meet deadlines, • Ability to stand up at least 8 hours a day, • Ability to lift up to 50 pounds and push/pull up to 100 pounds when necessary, • Certification on packing machine and/or forklift, • Ability to speak conversational English, • Adhering to company attendance requirements

Job DescriptionDescriptionThis position is responsible for the safe transportation of engine components, parts, and similar loads. Assists the engine builders during engine overhauls, perform vehicle inspections, and local pick-up and delivery. The incumbent in this position is expected to model the following practices on a daily basis: 1) Demonstrate alignment with the company's mission and core business values; 2) Collaborate with key internal/external resources; 3) Participate in ongoing self-development. Essential Functions· Delivery and pick-up of engine components in a safe and timely, efficient, and courteous manner · Assist the shop service technicians with engine rebuilds and maintenance · Secure components and other equipment, by means of chaining, strapping, and blocking under the strict accordance and established procedures · Perform pre- and post- vehicle inspections; Inspects vehicles for defects and safe operating condition, before, during, and after delivery trips · Report vehicle defects, accidents, traffic violations, or damage to the vehicles · Perform basic vehicle maintenance tasks, such as adding oil, fuel, or radiator fluid or performing minor repairs · Complete DOT required drivers daily log and trip sheets accurately and without misrepresentation · Obtain required signatures on pick-up and exchange forms · Assist other departments whenever required in an efficient manner · Performs other duties as assigned Knowledge, Skills, and Abilities· Basic knowledge of industrial engine rebuild, transportation, and safe driving procedures · Demonstrates proficiency with current computer software, related hardware, and machine electronic systems · Knowledge of forklift, scissor lift, and overhead crane operation · Knowledge and understanding of Motor Carrier Safety Regulations/DOT guidelines · Knowledge of machines and tools, including their designs, uses, repair, and maintenance · Knowledge of principles and processes for providing customer and personal services. This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction · Quality control analysis skills - conducting tests and inspections of products, services, or processes to evaluate quality or performance · Operation and control skills - controlling operations of equipment or systems · Equipment selection skills - determining the kind of tools and equipment needed to do a job · The ability to quickly and repeatedly adjust the controls of a machine or a vehicle to exact positions · Ability to read maps and operate GPS systems · Ability to maintain a clean driver’s record and diligent attention to safety · Ability to operate hand tools, power tools, and equipment used in mechanical repair · The ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble small objects · The ability to read and understand information and ideas presented in writing · The ability to listen to and understand information and ideas presented through spoken words and sentences RequirementsEducation and Experience: · One or more years’ driving experience preferred, with verifiable over-the-road experience operating combination commercial vehicles · One or more years’ industrial engine rebuild skills, knowledge, or experience is preferred · High school or equivalent diploma preferred · Valid Driver’s license with Class A or B - CDL certification, DOT Physical Examination (Medical card) · Possess knowledge of and/or previous experience in driving delivery trucks, towing tandem axle utility trailers, and operating safely within high traffic or congested city zones and in small areas Supervisory Responsibilities: · None Travel: · Travel up to 50% Physical Requirements: · Must be able to remain in a stationary position up to 100% of the time · Must be able to move objects, and use abdominal and lower back muscles to provide support over time without fatigue. · Frequently moves materials or equipment weighing up to 50 pounds · Constant movement and use of limbs; this position requires good manual dexterity, coordination, and stamina · Ascend/descend with gradual or continuous progress by oneself, using both hands and feet and climb up and down ladders · Be able to safely maneuver and work underneath equipment · Routinely reacts to visual, auditory, and other signals, including alarms and instructions, and is required to visually inspect work Work Environment: · Requires working in a closed vehicle or equipment · Requires wearing common protective or safety equipment · Requires working outdoors, exposed to all weather conditions including extreme conditions such as heavy rain, wind, or excessive temperatures · Includes exposure to sounds and noise levels that are distracting or uncomfortable · Exposure to small quantities of chemicals, steam, high-pressure water, and high speed rotating equipment · Significant time spent in confined spaces and/or high places · Exposure to computer screens Disclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed.

Job DescriptionImmediately hiring Food Machine Operator for a large food warehouse on the north side of San Antonio (airport area). This is a cold environment at 42-45 degrees daily. Pay is $17/hr. Shift is Mon-Fri 5am start (8-10 hr. shifts, until finished) Food Production Worker details: • Operate machines used for mixing, cooking, slicing, filling, or packaging food, • Load/unload materials onto production lines or into machines, • Assemble food products recipes or batches according to company specs, • Pack finished food items into boxes or containers, • Seal and label packaging for distribution, • Stack and move pallets using pallet jacks, • Clean and sanitize work areas, tools, and equipment following food safety guidelines, • Quality inspection of food products, • Remove defective products or packages from the production lineRequirements:, • Must be able to work in a cold environment (42-45 degrees), • Previous experience in food Machine Operation is required., • Seeking punctual, reliable, and energetic individuals, • Ability to stand be active for entire shift, • Lifting up to 50 pounds regularly, • Willingness to work in multiple departments to advance and grow with company, • Excellent communication skills and ability to work well on a team

Job DescriptionWe’re hiring a Punch Wire Operator to run binding equipment and ensure finished products meet quality standards every time. If you’re someone who stays focused, works efficiently, and catches the small details others might miss, we want to hear from you! Responsibilities: • Setting up and operating punch and binding machines for Wire-O or spiral products, • Preparing and aligning materials for accurate punching and binding, • Adjusting machine settings such as hole spacing, wire size, and tension, • Inspecting finished products for quality issues like misalignment or loose binding, • Troubleshooting minor machine issues and performing routine cleaning and maintenance, • Tracking production counts, material usage, and job details accurately Requirements:, • Previous machine operating experience required (binding or punch equipment preferred), • Strong attention to detail and ability to perform repetitive tasks with accuracy, • Mechanical aptitude and ability to make basic adjustments or troubleshoot equipment, • Ability to read and follow production orders and specifications, • Comfortable standing for long periods and lifting up to 50 lbs, • Must pass background check and drug test Schedule:, • 7 AM - 3:30 PM, • Overtime as needed Pay Rate:, • $16-$17/Hour Location:, • Near Downtown!

Job DescriptionKIMURA LEAD COOK WE ARE SAN ANTONIO’S #1 RAMEN SHOP, LOCATED NORTH OF DOWNTOWN. WE SERVE ALL SCRATCH MADE TRADITIONAL JAPANESE CUISINE JOB DESCRIPTION/RESPONSIBILITIES/QUALIFICATIONS: *MUST BE FLEXIBLE ;MUST BE AVAILABLE FRIDAY AND SATURDAY (AM OR PM) BASED ON NEEDS OF THE COMPANY, AND EXPECT 5 DAY WORK SCHEDULE (NOT LIMITED TO) WE GET OUT LATE *KEYHOLDER POSITION, OPENS OR CLOSES RESTAURANT *FOLLOWS OPENING AND CLOSING CHECKLISTS, ADHERES TO DAILY DEEP CLEANS *RESPONSIBLE FOR MAINTAINING/COMMUNICATING NEEDS NECESSARY EQUIPMENT TO MAKE THE MACHINE FUNCTION *MONITORS TIME OF TASKS DELEGATED ,AND MANAGES OTHER STAFF IN THEIR DEPARTMENT DURING SHIFT, MONITORS SALES VS LABOR, FOOD QUALITY, TICKET TIMES, CLEANLINESS AND ORGANIZATION, DISCIPLINED, ADHERES TO SAFETY AND SANITATION REQUIRED BY HEALTH CODE AND OTHER INSPECTIONS *WRITES AND FILLS OUT PREP LIST SHEET ACCURATELY NIGHTLY. WEEKLY INVENTORY. *PROBLEM SOLVER, AND FIXES THINGS *COMMUNICATES EFFECTIVELY WITH STAFF, GUESTS, AND OTHER LEADS/ SUPERVISORS(FOH MGMT) *WORKS A LINE COOK POSITION DURING SHIFT AND A LEADER WORTH FOLLOWING. *MANAGES THE DISHWASHER STAFF AND ANY OTHER POSITIONS RELATIVE TO THE BACK OF THE HOUSE. *TRAINS STAFF AS NEEDED *WILL RECEIVE TRAINING FOR A WIDE RANGE OF JOB QUALIFICATIONS: MANAGER FOOD HANDLERS LICENSE.(MUST BE CURRENT) 5 YEARS EXPERIENCE W// HIGH VOLUME IN A PROFESSIONAL KITCHEN PAY$19/$20 Powered by JazzHR br1Gaullng

Job DescriptionDescription: Essential Functions and Responsibilities • Receive direction from supervisor and work from prescribed procedures, oral instructions and close direction., • Work involves a variety of simple manual tasks, working as a team member of a group, receiving guidance and instructions as to what to do, when to do it, and how to do it., • Operate forklift truck, bob cats, and other machinery., • Clean and inspect machinery and other equipment., • Move or rearrange equipment, and materials as directed., • Assist in maintenance projects such as concrete, oiling and greasing equipment., • Clean production area using shovels, brooms, etc., • Ability to work in fast paced environment, • Ability to meeting attendance schedule with dependability and consistency, • Follow all safety procedures/policies, • Willingness to cross-train in other areas Additional Functions/Job Duties: • Able to lift up to 35 lbs, • Other duties as assigned. Benefits • Wages in accordance with experience level, • Bonuses quarterly based on performance, • Health Insurance, • Dental and Vision, • 401k, • Life Insurance, • PTO, • PPE provided Requirements:

Job Description Warren Oil has an immediate need for Line Operator at our San Antonio manufacturing facility! • Fulltime opportunity, • Competitive pay, • Benefits, • Days Machine Operator Duties: • Responsible for operating various manual and automated equipment in the production process., • Set up machinery and ensure all production materials are available., • Operate and monitor equipment and replenish materials as needed., • Visually inspect production run and document results., • Determine and report malfunctions to appropriate parties., • High School diploma or GED, • 1-3 year of general work experience required., • Must be able to lift up to 50 lbs consistently, • Prior production/manufacturing machine operation experience preferred., • Previous experience within high-speed industrial environment., • Ability to operate manufacturing equipment., • Knowledge of industrial technology a plus. Warren Oil is the largest independent blender and packager of lubricants to the automotive, agriculture, commercial and heavy duty markets in North America. The company operates six manufacturing and packaging facilities, located in North Carolina, Alabama, Arkansas, Texas, Illinois, and Pennsylvania. Warren Oil markets its lubricants, both conventional and synthetic, domestically and internationally to over forty countries, under the WARREN brand, the LUBRIGUARD brand, the LUBRIGOLD brand and the ITASCA brand. Warren Oil also manufactures and markets private label products for a number of Fortune 500 companies in addition to manufacturing and marketing a full line of automotive and heavy duty chemicals, including anti-freeze and brake fluids, under its proprietary AUTOGUARD brand name. Warren Oil is an Equal Opportunity/Affirmative Action employer and will consider all qualified applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Job DescriptionSalary: Hourly Bore Machine Operator BROADBAND TELECOM SERVICES, INC. Broadband Telecom Services is a full-service telecommunications construction contracting company with multiple locations throughout the state of Texas. JOB DESCRIPTION This position will require set up and operating boring machine to bore, drill, tap, spot face, groove, mill or ream metal work pieces according to specifications, tooling instructions, and standard charts, applying knowledge of boring procedures and machining methods. This position will require heavy labor digging, lifting, working on ladders, and teamwork. This position requires the employee to work out in the elements. PREFERRED QUALIFICATIONS Experience with a trencher or other construction equipment is a plus ESSENTIAL JOB FUNCTIONS- INCLUDE, BUT ARE NOT LIMITED TO THE FOLLOWING: Must be able to dig trenches and run heavy construction equipment ex: Ditch Witch & Vermeer Directional Operators Move drilling equipment to construction location ex: driving or loading and unloading the machine Set up drilling and hoisting machinery ex: connecting drill pipe sections Locators to run underground facility location equipment Drill operator (any size & any brand) locate cables and drill heads Connect power cables or hoses for water or air supply Operate the drilling machinery ex: regulating pressure of tools, controlling the speed of rotary tables and air flows Operate slush pumps in order to ensure circulation and consistency of drilling fluid/mud in well Correct problems in drilled holes caused by mechanical breakdowns or by harmful natural conditions Locate and recover lost or broken bits, casings, drill pipes etc. from wells using special tools Maintain records of footage drilled, materials and tools used Report information about drilling process to the supervisor on site Ensure safety guidelines are enforced and weekly safety topics are followed EDUCATION & LICENSES/CERTIFICATES: • High school diploma or equivalent preferred., • Must possess a valid Drivers License and a safe driving record. LANGUAGE/MATHEMATICAL SKILLS & REASONING ABILITY • Must be able to use written and verbal communications in English language. REASONING ABILITY & PHYSICAL DEMANDS • Ability to work aloft., • Must have manual dexterity and the ability to utilize various hand tools and test equipment., • Must be able to drive a truck or van including a truck/van with an aerial lift, • Must be able to lift up to 50 pounds., • Must be able to type on a computer, and utilize a smart phone to read and update prints., • Must be able to kneel, crawl, push, pull, bend, stoop, lift and dig. BENEFITS • Paid Time Off (Holiday/Vacation/PTO), • Benefits Package, • 401K Retirement plan with company match Please visit our website at apply online and learn more about our company. Broadband Telecom Services is an equal opportunity employer and does not unlawfully discriminate against employees or applicants for employment on the basis of an individuals race, color, religion, creed, sex, national origin, age handicap, disability, marital status, veteran status, reserve or National Guard status, or any other status protected by applicable law. Broadband Telecom Services, Inc. participates in the E-Verify Program.

We are seeking a highly skilled and innovative.The Data Scientist will play a critical role in leveraging advanced data analytics, machine learning, and statistical modeling to support intelligence, surveillance, and reconnaissance (ISR) operations.This position requires expertise in data science me

Koniag Data Solutions, a Koniag Government Services company, is seeking an Endpoint Engineering Services (Cyber IT Business Process Engineer III) to support KDS at Joint Base, San Antoino, TX. This position requires the candidate to be able to obtain a Public Trust. This position is for a Future New Business Opportunity. We offer competitive compensation and an extraordinary benefits package including health, dental and vision insurance, 401K with company matching, flexible spending accounts, paid holidays, three weeks paid time off, and more. Essential Functions, Responsibilities & Duties may include, but are not limited to: Provides advanced expertise and leadership in identity engineering and management services for the Defense Health Agency's extensive and complex IT infrastructure. Serves as a key specialist responsible for designing, implementing, and optimizing identity and access management (IAM) solutions across DHA's global network of military hospitals, medical clinics, and dental clinics. Leads the development and implementation of comprehensive identity engineering strategies that align with DoD cybersecurity requirements, Risk Management Framework (RMF), NIST guidelines, and various DoD strategies including Zero Trust, ICAM (Identity, Credential, and Access Management), and Digital Modernization. Ensures these strategies are effectively implemented across approximately 250,000 end-user devices, 3,000 physical and virtual servers, and 250 sites worldwide. Designs and oversees the implementation of advanced IAM architectures, including single sign-on (SSO), multi-factor authentication (MFA), privileged access management (PAM), and identity governance and administration (IGA) solutions. Ensures seamless integration of these systems with DHA's existing IT infrastructure and security controls. Develops and implements identity lifecycle management processes, ensuring efficient and secure onboarding, modification, and offboarding of user identities across all DHA systems and applications. This includes both internal users and external partners accessing DHA resources. Leads initiatives to implement attribute-based access control (ABAC) and role-based access control (RBAC) models, ensuring that access to sensitive information and systems is strictly controlled based on user attributes, roles, and the principle of least privilege. Collaborates with cybersecurity teams to integrate identity management solutions with broader security operations, including security information and event management (SIEM) systems, user and entity behavior analytics (UEBA), and threat intelligence platforms. Oversees the implementation and management of Public Key Infrastructure (PKI) and certificate management systems, ensuring secure authentication and encryption across DHA's IT environment. Develops and implements identity federation strategies to enable secure information sharing and access between DHA and other DoD entities, federal agencies, and healthcare partners. Leads efforts to automate identity management processes, developing scripts and leveraging AI and machine learning technologies to enhance efficiency, reduce human error, and improve security in identity-related operations. Provides expert guidance on identity engineering best practices to IT and security teams across DHA. Develops and delivers training programs to ensure all relevant personnel understand and adhere to established identity and access management policies and procedures. Collaborates with compliance and risk management teams to ensure that identity management practices meet all relevant regulatory requirements, including HIPAA, FISMA, and DoD-specific mandates. Generates regular reports on the state of identity management within DHA, including metrics on access control effectiveness, identity-related security incidents, and compliance status. Presents findings and recommendations to leadership for continuous improvement. Stays abreast of emerging technologies and methodologies in identity engineering, particularly those relevant to large-scale, complex healthcare IT environments. Recommends and implements improvements to enhance efficiency, security, and user experience. Education: Master's degree in Computer Science, Cybersecurity, Information Systems, or a related field. Relevant certifications (e.g., CISSP, CISM, CCSP, or equivalent) are required. Identity management-specific certifications (e.g., CIAM, CIDPRO) are highly desirable. Experience: 8-10 years of experience in identity engineering and management, with at least 5 years focused on large-scale, complex environments. Should have demonstrable experience in implementing and managing comprehensive IAM solutions, preferably in military or healthcare settings. Familiarity with DoD security regulations and identity management frameworks is essential. Requirements: Ability to obtain a Public Trust Our Equal Employment Opportunity PolicyThe company is an equal opportunity employer. The company shall not discriminate against any employee or applicant because of race, color, religion, creed, ethnicity, sex, sexual orientation, gender or gender identity (except where gender is a bona fide occupational qualification), national origin or ancestry, age, disability, citizenship, military/veteran status, marital status, genetic information or any other characteristic protected by applicable federal, state, or local law. We are committed to equal employment opportunity in all decisions related to employment, promotion, wages, benefits, and all other privileges, terms, and conditions of employment. The company is dedicated to seeking all qualified applicants. If you require an accommodation to navigate or apply for a position on our website, please get in touch with Heaven Wood via e-mail at or by calling 703-488-9377 to request accommodations. Koniag Government Services (KGS) is an Alaska Native Owned corporation supporting the values and traditions of our native communities through an agile employee and corporate culture that delivers Enterprise Solutions, Professional Services and Operational Management to Federal Government Agencies. As a wholly owned subsidiary of Koniag, we apply our proven commercial solutions to a deep knowledge of Defense and Civilian missions to provide forward leaning technical, professional, and operational solutions. KGS enables successful mission outcomes for our customers through solution-oriented business partnerships and a commitment to exceptional service delivery. We ensure long-term success with a continuous improvement approach while balancing the collective interests of our customers, employees, and native communities. For more information, please visit . Equal Opportunity Employer/Veterans/Disabled. Shareholder Preference in accordance with Public Law 88-352

Koniag Data Solutions, a Koniag Government Services company, is seeking an Endpoint Engineering Services (Cyber IT Business Process Engineer III) to support KDS at Joint Base, San Antonio, TX. This position requires the candidate to be able to obtain a Public Trust. This position is for a Future New Business Opportunity. We offer competitive compensation and an extraordinary benefits package including health, dental and vision insurance, 401K with company matching, flexible spending accounts, paid holidays, three weeks paid time off, and more. Essential Functions, Responsibilities & Duties may include, but are not limited to: Provides advanced expertise and leadership in endpoint engineering and management services for the Defense Health Agency's extensive and diverse IT infrastructure. Serves as a key specialist responsible for designing, implementing, and optimizing endpoint management solutions across DHA's global network of military hospitals, medical clinics, and dental clinics. Leads the development and implementation of comprehensive endpoint engineering strategies that align with DoD cybersecurity requirements, Risk Management Framework (RMF), NIST guidelines, and various DoD strategies including Zero Trust, ICAM, and Digital Modernization. Ensures these strategies are effectively implemented across approximately 250,000 end-user devices, including desktops, laptops, mobile devices, and medical equipment. Designs and oversees the implementation of advanced endpoint management architectures, including mobile device management (MDM), enterprise mobility management (EMM), and unified endpoint management (UEM) solutions. Ensures seamless integration of these systems with DHA's existing IT infrastructure and security controls. Develops and implements robust endpoint security measures, including endpoint detection and response (EDR), advanced threat protection, data loss prevention (DLP), and encryption technologies. Ensures that all endpoints maintain a strong security posture against evolving cyber threats. Leads initiatives to standardize and optimize endpoint configurations across the DHA network, developing and maintaining secure baseline configurations for various device types and use cases. Implements automated processes for configuration management and compliance checking. Collaborates with cybersecurity teams to integrate endpoint management solutions with broader security operations, including security information and event management (SIEM) systems, vulnerability management platforms, and incident response workflows. Oversee the implementation and management of patch management processes for all endpoints, ensuring timely application of security updates and maintaining compliance with DoD security standards. Develops and implements strategies for secure remote access and telework capabilities, ensuring that off-site endpoints maintain the same level of security and compliance as on-premises devices. Leads efforts to automate endpoint management processes, developing scripts and leveraging AI and machine learning technologies to enhance efficiency, reduce human error, and improve security in endpoint-related operations. Provides expert guidance on endpoint engineering best practices to IT and security teams across DHA. Develops and delivers training programs to ensure all relevant personnel understand and adhere to established endpoint management policies and procedures. Collaborates with clinical engineering teams to develop secure management strategies for medical devices and other specialized endpoints, balancing security requirements with clinical functionality and regulatory compliance.Generates regular reports on the state of endpoint management within DHA, including metrics on device compliance, security incidents, and operational efficiency. Presents findings and recommendations to leadership for continuous improvement. Stays abreast of emerging technologies and methodologies in endpoint engineering, particularly those relevant to large-scale, complex healthcare IT environments. Recommends and implements improvements to enhance security, user experience, and operational efficiency. Education: Master's degree in Computer Science, Cybersecurity, Information Systems, or a related field. Relevant certifications (e.g., CISSP, CISM, CompTIA Security+, or equivalent) are required. Endpoint management-specific certifications (e.g., Microsoft 365 Certified: Enterprise Administrator Expert, VMware Certified Professional - Digital Workspace) are highly desirable. Experience: 8-10 years of experience in endpoint engineering and management, with at least 5 years focused on large-scale, complex environments. Should have demonstrable experience in implementing and managing comprehensive endpoint management solutions, preferably in military or healthcare settings. Familiarity with DoD security regulations and endpoint management frameworks is essential. Requirements: Ability to obtain a Public Trust Our Equal Employment Opportunity PolicyThe company is an equal opportunity employer. The company shall not discriminate against any employee or applicant because of race, color, religion, creed, ethnicity, sex, sexual orientation, gender or gender identity (except where gender is a bona fide occupational qualification), national origin or ancestry, age, disability, citizenship, military/veteran status, marital status, genetic information or any other characteristic protected by applicable federal, state, or local law. We are committed to equal employment opportunity in all decisions related to employment, promotion, wages, benefits, and all other privileges, terms, and conditions of employment. The company is dedicated to seeking all qualified applicants. If you require an accommodation to navigate or apply for a position on our website, please get in touch with Heaven Wood via e-mail at or by calling 703-488-9377 to request accommodations. Koniag Government Services (KGS) is an Alaska Native Owned corporation supporting the values and traditions of our native communities through an agile employee and corporate culture that delivers Enterprise Solutions, Professional Services and Operational Management to Federal Government Agencies. As a wholly owned subsidiary of Koniag, we apply our proven commercial solutions to a deep knowledge of Defense and Civilian missions to provide forward leaning technical, professional, and operational solutions. KGS enables successful mission outcomes for our customers through solution-oriented business partnerships and a commitment to exceptional service delivery. We ensure long-term success with a continuous improvement approach while balancing the collective interests of our customers, employees, and native communities. For more information, please visit . Equal Opportunity Employer/Veterans/Disabled. Shareholder Preference in accordance with Public Law 88-352

Job DescriptionDescription: About Us: At Tomball Controls, we specialize in manufacturing custom fuel tanks, custom sound attenuated enclosures, and access platforms for emergency power generators. We are proud to serve clients across various industries, providing them with high-quality power packaging solutions to meet their specific requirements. With years of experience among our team members and a commitment to excellence, we have built a reputation for delivering reliable, durable products on time and within budget. Job Description: We are seeking an experienced and highly motivated P4 / S4 Salvagnini Operator to join our manufacturing team. The ideal candidate will have hands-on experience in sheet metal fabrication, a strong understanding of quality systems, and a proactive approach to continuous improvement. Key Responsibilities: Machine Operation & Setup • Safely load and unload sheet metal materials., • Interpret work orders, blueprints, and engineering drawings for accurate part production., • Inspect finished parts using measuring tools (calipers, tape measures, micrometers, gauges), • Identify, troubleshooting, and resolve quality issues, report deviations to supervisors and quality teams., • Adhere to OSHA and company safety procedures, including proper use of PPE, lockout/tagout procedures., • Maintain a clean, organized, and safe work environment at all times., • Perform routine machine inspections, cleaning, lubrication and minor maintenance., • Monitor production flow and coordinate with upstream/downstream operations for efficiency., • Maintain organized tooling, workstations, and material staging areas. Work Environment • Manufacturing floor environment with exposure to machinery, noise, and metalworking processes., • PPE required (safety glasses, steel-toe boots, gloves, hearing protection, etc.). Requirements: Required Qualifications: • HS Diploma or GED., • Strong knowledge of sheet metal fabrication principles., • Ability to read and interpret technical drawings and blueprints., • Proficiency with measurement tools and basic quality inspection processes., • Strong mechanical aptitude and attention to detail., • Ability to lift to 50lbs and stand for extended periods., • Commitment to safety and quality standards. Preferred Qualifications: • Experience with Salvagnini, AMADA, Trumpf, or other CNC fabrication machinery., • Familiarity with automated manufacturing and lean production environments., • Basic understanding of CNC programming or software used with Salvagnini machines (e.g., SDD, S4CAM)., • Forklift or overhead crane operation certification. Equal Opportunity Employer/Minorities/Women/Veterans/Disabled Tomball Controls is an Equal Opportunity and Affirmative Action Employer. Tomball Controls is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.

Job Description Join Our Team as a Class A CDL Driver! Average Weekly Pay: $1,650 Why Drive with Us? • Home Every Day: Enjoy the comfort and convenience of returning home daily., • Generous PTO: Start with 144 hours of paid time off in your first year., • Bonuses: Unlock exciting bonus opportunities., • Comprehensive Benefits:, • Company-paid medical insurance, • Health Saving Account and Flexible Spending Account available, • Family and pet benefits, • Extra Earnings: Opportunities to earn more if you pick up extra routes., • Exclusive Discounts: Receive discounts on vehicle purchases., • Stay Connected: We provide a company-paid phone., • Career Growth: Explore numerous growth opportunities within our dynamic team. Job Responsibilities: • Inventory Movement: Safely transport customer cars between inspection centers and vending machine locations., • Professionalism: Maintain courteous behavior and professional appearance., • Vehicle Handling: Load and secure vehicles on a 9-car hauler., • Safety Compliance: Follow safety procedures and keep an accurate driver log., • Driving Standards: Maintain a clean driving record with a valid Class A CDL., • License: Valid CDL with Med Card., • Age: Minimum 21 years old., • Language: Proficient in English (reading, writing, speaking)., • Mobility: Walk around 2,000+ steps daily, climb a 10-foot ladder., • Flexibility: Bend, kneel, twist, squat, stand, and climb to secure loads., • Activity: Stand, stretch, walk, stoop, push/pull outdoors., • Skills: Excellent visual acuity and manual dexterity., • Safety Gear: Use non-slip shoes, gloves, and protective garments. Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Please note this job description is not designed to contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description Make a Difference in YOUR Career! Our vision is both simple and ambitious: to put our drinks on every table. We are the leading global independent beverage solutions provider. We serve a broad range of national and international retailers as well as Global, National and Emerging (GNE) brands. Our products are distributed worldwide from our production sites in Europe, North America, and Australia. Although our own branding may not appear on the labels of the beverages we produce, there is a good chance you are reading this while sipping one of our drinks. Our ambition is to continually improve, and it’s what keeps us at the top of our game. We are solutions-based. We are innovative. We seek out new challenges and conquer them. This is our company ethos, but it’s our people’s too: Refresco is at the cutting edge of a fast-moving industry because we have passionate people pushing the boundaries of what’s best. Stop and think: how would YOU put our drinks on every table? Essential Job Functions: • Adhere to all health and safety policies/procedures, Good Manufacturing Practices (GMPs) and wear the required personal protective equipment (PPE) while in the warehouse or production areas (including but not limited to hairnets/beard nets, safety glasses, hearing protection, hard toe and slip/oil resistant shoes, appropriate safety gloves, and seatbelts while operating forklifts), • Responsible to adhere to food quality and food safety as per the standard(s) provided by corporate, customer, and/or governing bodies (ex. SQF)., • Ability to read, understand, and adhere to a production manufacturing schedule and communicate issues or deviations with the appropriate parties., • Maintain production flow on machinery by monitoring downstream and upstream issues, supplying raw materials to the equipment, and performing minor servicing if and when needed., • Follow all Quality Assurance and Production line standard operating procedures., • Follow standard operating procedures to perform equipment changeovers; ability to read imperial and metric measurements., • Record all necessary information for production and quality records. Keep accurate downtime reports and documentation., • Responsible for performing equipment and general sanitation in your work area or as assigned by leadership., • Work closely with all departments to improve quality, increase efficiencies, and reduce waste., • Ability to understand visual and auditory cues to identify production or machine related issues., • Perform minor machine maintenance., • Experience in a high-speed beverage production environment, beverage production experience preferred., • Demonstrates the ability to gain a firm understanding of production machinery/forklifts, including an awareness of technical issues., • Ability to work quickly and accurately under pressure., • Adeptness in basic mathematical abilities., • Skill in understanding and interpreting gauges, thermometers, and weight measurements., • Formal training in areas such as WHIMIS, HACCP, Hygiene etc. preferred., • Forklift certification may be required. Competencies: • Problem-Solving Skills – ability to troubleshoot machinery and production issues efficiently, collaborating with others to resolve complex issues., • Teamwork – Collaboration with coworkers to achieve production targets, support for team members, and contribution to a positive work environment., • Documentation Skills – accurate recording of production data, completion of required paperwork or electronic documentation, and maintenance of organized records., • Safety Awareness – knowledge of safety protocols, hazard identification, and adherence to safety regulations at all times. Timely and accurately completes all required monthly training., • Communication Skills – Effective verbal and written communication with team members and supervisors, reporting issues accurately, and collaborating to ensure smooth workflow. Follows equipment down-time escalation process schedule. Education and Experience: • High School Certification or equivalent., • 1-3 years relevant work experience in a manufacturing environment preferred. Working Conditions: • Work Schedule: Weekdays, weekends, afternoon, evenings, overnight and holidays may be required. Overtime scheduled as needed., • Work Environment: Operating in a fast-paced production plant with numerous moving parts. Noise levels require hearing protection and temperatures can get very hot and/or relatively cold. The environment is structured and supervised, with clear production targets and schedules to meet. Travel Requirements: • 0% travel anticipated. Physical Requirements: R = Rarely (0-15%) O = Occasionally (16-45%) F = Frequently (46-100%) Physical Demand R O F Stand X Stoop, kneel, crouch, or crawl X Lifting 50 lbs. (minimum lbs lifted 15lbs) X Carry weight, lift X Walking X Push/Pull X Driving (Forklift) X Climb (stairs/ladders) or balance X • Visual/Sensory – This position requires attention to detail, requiring attention with one or two senses at a time., • Coordination and Dexterity: Excellent hand-eye coordination and manual dexterity for precise control of equipment., • Mental Stress – There is pronounced pressure from deadlines, production quotas, accuracy, or similar demands. Other Duties: • This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. A Career with Refresco Refresco Beverages US, Inc. offers competitive pay and comprehensive benefits, which include: • Medical/Dental/Vision Insurance, • Health Savings Accounts and Flexible Spending Accounts, • Life and AD&D Insurance, • Pet Insurance, • Legal Benefits, • 401(k) Savings Plan with Company Match, • 12 Paid Holidays, Vacation, and Paid Time Off, • Well-being Benefits, • Discount and Total Reward Programs Join Refresco TODAY and enjoy a rewarding CAREER! Any employment agency, person, or entity that submits a résumé to this career site or a hiring manager does so with the understanding that the applicant's résumé will become the property of Refresco Beverages US, Inc. Refresco Beverages, US Inc., will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person, or entity. Employment agencies that have agreements with Refresco Beverages US, Inc., and have been engaged in a search shall submit a résumé to the designated Refresco recruiter or, upon authorization, submit a résumé to this career site to be eligible for placement fees. Refresco Beverages US, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity, gender expression, Veteran status, or any other classification protected by federal, state, or local law Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description Sterling Foods is NOW HIRING Machine Operators at our centrally located food bakery plant. Mechanical Skills necessary. Must pass background check and drug test. We offer: • Stable full-time employment with choice of two shifts, • Competitive pay, • Opportunities for advancement, • Overtime pay, shift differential, • Retention bonus starting at $200 at 30 days, and up to $900 at Six Months, • Paid holidays, sick days, and two weeks of vacation after the first year!, • Medical, dental, vision, and life insurance plans Duties: • Set up machine, • Make necessary adjustment to avoid down time, • Thread appropriate film, • Maintain corrective down time log This Organization participates in E-Verify. Equal Employment Opportunity is THE LAW

Job DescriptionPrecision CNC Programmer/Operator (Fanuc/HAAS) San Antonio, TX | 2nd Shift Ready to level up your machining career? • Do you enjoy switching between mill-turn, VMC, and live-tooled lathe work?, • Can you read complex prints and tweak programs right at the control?, • Want a team culture with events, recognition, and room to grow?Role snapshot, • Set up and run mill-turns, 3–4 axis VMCs, and lathes with live tooling, • Edit and refine programs at the machine using Fanuc & HAAS controls, • Perform in-process and final inspections to verify tolerances, • Interpret blueprints for dimensions, GD&T tolerances, and operation notes, • Choose and secure fixtures, tooling, and workholding, • Complete daily maintenance on assigned machinesWhat you’ll need, • 2+ years operating CNC Mill-Turn machinery (or robust experience on mills and lathes), • Comfort editing programs at the control (Fanuc & HAAS), • Measurement expertise: micrometers, calipers, indicators, etc., • Strong pace and focus in a fast-moving shop environment, • Curiosity and drive to learn and progressProficiencies, • Troubleshooting Skills, • CNC Machine Setup & ChangeoverEquipment you’ll operate, • CNC Mill (3–4 axis VMC): Haas, Doosan, • CNC Lathe (2–4 axis): Haas, DoosanWhat’s in it for you, • PTO and vacation time, • Paid holidays, • Medical, Dental, and Vision coverage, • 401K with company match, • Holiday-season annual shutdown, • Potential year-end bonuses tied to individual and company performance

Job DescriptionWe’re hiring for a Cutter & Bindery Machine Operator who is comfortable handling setup, adjustments, and keeping production on track in a fast-paced environment.If you’re mechanically inclined, detail-oriented, and like staying hands-on throughout your shift, this is a solid opportunity to put your skills to work! Responsibilities: • Setting up and operating folding machines based on job specifications, • Monitoring production runs and making adjustments to maintain quality and efficiency, • Troubleshooting minor mechanical issues and clearing jams to minimize downtime, • Completing end-of-run cleaning and basic preventative maintenance, • Recording production data, counts, and run details accurately, • Assisting with other equipment or tasks as needed to support production goals Requirements:, • 1–2 years of machine operating experience required, • Strong mechanical aptitude and ability to troubleshoot basic equipment issues, • Ability to read measurements (ruler/tape measure) accurately, • Comfortable lifting up to 50 lbs and standing for extended periods, • Ability to follow written and verbal instructions with attention to detail, • Must be able to pass background check and drug test Schedule:, • 7 AM - 3:30 PM, • Overtime as needed Pay Rate:, • $17-$18/Hour Location:, • Near Downtown!

Job Description * This opening is on 3rd (Graveyard) Shift, scheduled Sunday night through Thursday night, with potential for overtime on Friday night or Saturday. Must be available at 6pm on Sunday. * The Maintenance Technician II performs skilled maintenance and repair of complex mechanical, electrical, HVAC, and other physical structures. Maintains, troubleshoots, and repairs facilities mechanical components and electrical systems in accordance with SOPs (standard operating procedures), internal requirements, manufacturer's specifications, and safety policies. Develops, maintains, and secures a spare parts inventory of basic maintenance hand and power tools. Recommends purchase of maintenance tools, equipment and supplies as required. Assists Maintenance Lead in developing methods and procedures to improve facility efficiency and workflow. Oversee and review the work of lower-level technicians. ACCOUNTABILITIES • Locate, identify, and resolve any safety issues with mechanical or electrical devices, • Proactively investigate needs, evaluate issues, and present/recommend alternatives to decrease overall facility operational downtime thus increasing operational effectiveness., • Develop and maintain purchasing/inventory controls for repair parts and tool inventories., • Support existing and future projects during installations, start-up, and long-term operation., • Support daily/weekly asset usage, • Assist in daily/weekly training warehouse personnel, • Assist with special projects as directed by management, • Continuously seeking to improve upon existing methods of operation, by research and development., • 3-5 years of experience in general maintenance machine operations, facility maintenance, and maintenance for high volume conveying systems, etc., • 3 years of experience in PLC and advanced electrical operational maintenance/repair, • Experience in/around: high volume conveying operations, water systems, large volume washers, motors, electrical, PLC controls, • Previous experience with the following: welding, pipe installation/ repair, and heating/ boiler units., • 3-5 years of experience in general maintenance machine operations, facility maintenance, and maintenance for high volume conveying systems, etc., • 3 years of experience in PLC and advanced electrical operational maintenance/repair, • Experience in/around: high volume conveying operations, water systems, large volume washers, motors, electrical, PLC controls, • Previous experience with the following: welding, pipe installation/ repair, and heating/ boiler units., • Previous experience with general facility maintenance functions including doors, office, forklifts, etc.

Job Description Provide maintenance services involving several craft skills (including electrical, plumbing, carpentry, and painting) necessary for the upkeep of campus facilities. May be assigned to evening or weekend schedule. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Replaces electrical and plumbing components, such as light bulbs and ballasts, ceiling fans, wall switches, electrical outlets, toilet fixtures, flush valves, lavatory, and shower faucets., • Troubleshoots and replaces electric circuits, breakers and fuses, electric motors on in-line circulator pumps and room exhaust fans., • Proficient with electrical test instrument: voltmeter, ammeter, and ohmmeter., • Repairs minor plumbing components such as faucets, shower valves, traps, toilet seats., • Repairs/replaces deteriorated wooded building components by measuring, cutting, nailing, gluing and sanding wood., • Repairs seams in carpets and replace thresholds., • Measures, cuts, reams, and threads water pipes; Measures, cuts, and solders copper water pipe up to 1 ½"., • Unstops sink and shower drains, sewer lines. Uses drain cleaning equipment and chemicals safely., • Performs routine installations of shelving and hang picture frames; replaces window glass., • Performs routine maintenance and repair of built-up roofs., • Applies paint using roller and brush., • Uses power tools such as electric drill, power saw, and thread cutting machine., • Works in Cooperative manner with other maintenance staff members., • Performs routine duties with high degree of autonomy while referring questionable cases to supervisor., • Maintains satisfactory and harmonious relationships with the public, and fellow employees each day to assure/sustain quality service and appropriate interactions with others., • Carries a cell phone (rotating schedule) to respond to after hour emergencies., • Performs other duties as assigned. QUALIFICATIONS: • High School Diploma or GED required., • One year of work related experience., • Must have an Electrical Technician Permit or able to acquire within 3 months, • Must clear and maintain a favorable background investigation and clearance, • Must maintain a valid driver's license, motor vehicle liability insurance and personal injury insurance, and complete the University Van Driver Training within 90 days of employment date., • Must be able to work evenings and/or weekends as needed, • Must have the ability to demonstrate basic skills in MS Office (Word, Excel, and Outlook) and common office equipment to include: computer, copier, and Ipad., • Must be proficient in speaking, reading, and writing English; must have ability to read written instructions, warning labels, MSDS Sheets in English, understand blueprints and technical drawings., • Must possess legible handwriting, possess eyesight in both eyes corrected to 20/20 and normal hearing ability (may be corrected); must successfully pass a PIPIC test for color blindness., • Must possess mathematical ability to add, subtract, multiply, and divide in order to compute material costs as required for completion of work order form., • Must be able to successfully handle frustrating conditions such as limits on time and limited access to equipment., • Ability to communicate effectively and display good judgment when providing customer service., • Able to successfully handle conditions such as limits on time, limited access to equipment, and dealing with uncomfortable customer. PHYSICAL DEMANDS: • Able to carry 50 pounds up and down stairs, • Frequent standing, kneeling/squatting, bending/ stooping, pushing/pulling, and twisting, • Frequent walking, climbing stairs/ladder/scaffolding, grasping/squeezing, wrist flexion/extension, and overhead reaching; frequent driving ; frequent handling or working with potentially dangerous equipment, • Frequent exposure to unpleasant or disagreeable physical environment such as high noise level and exposure to heat and cold, frequent handling or working with potentially dangerous equipment, • Work outside and inside, on slippery or uneven walking surfaces; frequent exposure to extreme hot and cold temperatures, inclement weather, insects, dust, toxic chemicals and fumes, noise, vibration, and electrical hazards; work around gas lines; work around machinery with moving parts; may work in tight or enclosed spaces; may work alone; may work irregular hours The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. St. Mary's University is a Hispanic-Serving Institution and an Equal Opportunity Employer. Job Posted by ApplicantPro

Job DescriptionJob Title: Machine OperatorSchedule: Full-time, with potential overtime.Shift work (days, evenings, or weekends) may be required depending on production needs. Pay Rate: $13.00-$15.25 (depends on schedule and shift)Shifts:Monday-Friday (8hr shifts)1st Shift Schedule: 6:15am- 2:45pm2nd Shift Schedule: 2:45pm- 11:15 am3rd Shift Schedule: 9:45pm- 6:15amCentennial Schedule (12hr shift)12 hr AM 6:30a-6:30p:3 DAY (M/TH/F) 4 DAY (T/W/S/S)12 hr PM 6:30p-6:30a:3 DAY (M/TH/F) 4 DAY (T/W/S/S)Overview:We are looking for a dedicated and detail-oriented Manufacturing Associate to join our team. In this role, you will be responsible for operating machinery and ensuring the efficient and safe manufacturing of high-quality parts.The ideal candidate will have a solid understanding of manufacturing processes and a commitment to maintaining safety standards. Key Responsibilities: • Must have 6 months plus experience as an INDUSTRIAL MACHINE OPERATOR., • Operate and monitor manufacturing equipment and machinery according to company standards., • Inspect products for defects and report any issues to supervisors or quality control teams., • Adhere to schedule and meet productivity goals., • Assist in troubleshooting and resolving minor mechanical issues.Qualifications:, • Previous experience in a manufacturing or production environment., • Basic understanding of manufacturing processes and quality control standards., • Strong attention to detail and problem-solving skills.

Job Description Job Summary: Produces HDPE pipe fittings/flanges using Compression Molding manufacturing. Position requires continuous presence at Production Plant to operate machinery as part of a team of operators. Required Experience: • Manufacturing: minimum 1 year, • Forklift: minimum1 year Essential Functions: • Follows sequence of operations with specific phases for production., • Accurately records production data of all finished parts., • Manually assembles and disassembles cast molds to remove produced parts., • Operates crane to maneuver part to and from press, machinery, and cooling and holding areas. Education & Experience: • High School Diploma or equivalent preferred., • At least 1 year of related work experience with manufacturing/machining equipment in an industrial or related setting preferred. Knowledge, Skills and Abilities: • Ability to learn compression extrusion process, which includes setup, operation, control screen, and reporting of various alarms and malfunctions., • Safe use of hand and pneumatic/electrical tools which may include impact guns, compressed air gun, jib crane, cutting blade, clamp machine, ratchet, temperature gun, thermometer, steel spatula, open speed wrench, screwdriver, air nozzle gun, rubber mallet, and putty knife., • Ability to perform basic mathematical functions such as reading measurements., • Written and verbal communication skills to read, understand and take instructions, correctly complete all documentation and communicate issues to supervisor., • Experience operating a forklift is highly preferred. Physical Requirements: Position requires constant standing, raising and lowering of arms, and use of hand tools. Regular pushing, pulling, lifting and/or maneuvering of up to 70 lbs. Exposure to high temperature in facility. Overtime may be required on occasion. Compensation and Benefits: • Competitive Salary, • Medical, Dental, and Vision Insurance, • Paid time off, • 401-K Note: This is a summary of duties and tasks and is not an exhaustive list. Duties and tasks are subject to change based on company needs. Equal Opportunity Employer: We are an equal opportunity employer and welcome applicants from all backgrounds and experience to apply. Job Type: Full-time Work Location: In person Company DescriptionImproved Piping Products, Inc. (IPP) was founded in 1979 and is a privately held family business. Our Production plant, Corporate Offices, and Warehouse are all located in San Antonio, Texas. IPP's fittings are sold to customers world-wide in various industries.Improved Piping Products, Inc. (IPP) was founded in 1979 and is a privately held family business. Our Production plant, Corporate Offices, and Warehouse are all located in San Antonio, Texas. IPP's fittings are sold to customers world-wide in various industries.

Job DescriptionImmediately hiring Production Machine Operators for a large manufacturing company on the southside of San Antonio. Start ASAP! Pay is $14-$15.25/hr. 1st AM shift - 6:15am-6:30pm Night PM shift - 6:15pm-6:30am Production Machine Operator Duties: • Set up and operate production machinery according to work instructions, • Document production and machine output to track production, • Feed raw materials or components into automated machines and monitor output for quality, • Perform routine quality checks following standard operating procedures, • Maintain clean, organized work areas and follow 5S workplace standards, • Report unsafe conditions or equipment issues immediatelyRequirements:, • Seeking at least 2-3 months manufacturing or machine operating experience, • Ability to follow safety and quality procedures, • Data recording and interpretation skills Please call/text 210-664-2680 #vipstaffing#zrsat