Trabajos manual en Syracuse, New York - Page 2Crear alertas

Microbiologist 6 Months Contract East Syracuse, NY Work Arrangement: 100% onsite Shift: First Shift (8:00 AM – 5:00 PM) Qualifications Knowledge/Skills: • Knowledge of aseptic technique, environmental monitoring, and microbiological Quality Control testing and procedures preferred., • Has excellent manual dexterity and aseptic technique., • Has ability to complete sampling or testing assignments in a timely and compliant manner, with minimal supervision., • Perform limited interpretation of data., • Demonstrate ability to handle multiple assignments simultaneously and complete assignments in a timely and compliant manner, with minimal supervision., • Knowledge of cGMPs and compendia testing required., • Must have effective verbal and written communication skills. Ideal candidates will have some experience or knowledge with the following skills and/or experience: • Aseptic Technique, • BioSafety Cabinets (BSC), • Knowledge about bioburden or endotoxin testing, • GDP and GLP exp, • PCR or Molecular chain testing Education/Experience/Licenses/Certifications • B.S. degree in Biological Sciences or related field with 0-3 years of QC microbiology laboratory experience preferred Responsibilities Other Requirements: • OT may be requested on an ad hoc basis., • Candidate will be required to report onsite., • Some weekend and Holiday time required as needed. Role Overview: The Microbiological Control (MC) Laboratory supports the onsite small scale commercial manufacturing facility. The QC Microbiology Laboratory Technician conducts routine microbiological laboratory testing of raw materials and products for in-process, release and stability samples in compliance with methods, procedures, protocols and regulatory requirements. The QC Microbiology Laboratory technician performs lab analysis of environmental and utility samples and identification of microorganisms according to defined procedures. Duties/Responsibilities • Perform laboratory analysis of samples, using aseptic technique, following established procedures and in full compliance with official compendia, health authority regulations, and established policies., • Conduct qualification of methods and/or other laboratory studies, according to scientific protocols., • Maintains accurate records of work performed and documents results, according to good documentation practices and established procedures as well as perform data entry into LIMS., • Assist with review of worksheets, as assigned., • Assists in the investigation of OOS results in areas of assigned responsibility., • Operates and maintains laboratory instruments, while ensuring the reliability of instrumentation through proper maintenance, with ability to troubleshoot minor issues., • Must analyze, evaluate, and interpret data, notifying clients of results, and assisting to resolve issues, if applicable. Identify opportunities for workflow and procedural improvements., • Promotes quality, safety and health, by ensuring clean work area, and adherence to procedures and safety culture., • Must participate in continuous improvement using lean principles to assist with streamlining and making the laboratory efficient., • Work schedule includes weekends and holidays. Comments / Special Instructions • This position will be 100% onsite at the Client East Syracuse location., • Aseptic Technique, • BioSafety Cabinets (BSC), • Knowledge about bioburden or endotoxin testing, • GDP and GLP exp, • PCR or Molecular chain testing

JOB TITLE: Microbiologist Location: East Syracuse, NY (100% onsite) Duration: 12 months initial (potential extension/potential right to hire) Conducts routine microbiological analyses of environmental monitoring and a variety of clean utility samples using aseptic technique and in compliance with established procedures and regulatory requirements. Must be capable of maintaining laboratory documentation associated with testing and investigations in areas of assigned responsibility. Must analyze, evaluate, and interpret data, notifying clients of results and assisting to resolve issues, if applicable. Identify and report any discrepancies from normal procedures or practices. Maintains a level of technical knowledge and understanding in the assigned area of responsibility, including use of equipment and instrumentation and is able to troubleshoot problems, if they occur. Support the implementation of new methods and equipment/instrumentation by performing required testing in support of validations, qualifications, or suitability testing. Must update and write new procedures, protocols, and reports, as requested. This position is a team-based position that requires rotating shift work, weekends, holidays and overtime. Quals-- Knowledge of aseptic technique, environmental monitoring, and microbiological Quality Control testing and procedures preferred. Has excellent manual dexterity and aseptic technique. Has ability to complete sampling or testing assignments in a timely and compliant manner, with minimal supervision. Perform limited interpretation of data. Demonstrate ability to handle multiple assignments simultaneously and complete assignments in a timely and compliant manner, with minimal supervision. Knowledge of cGMPs and compendia testing required. Must have effective verbal and written communication skills. If hired, you will enjoy the following Eclaro Benefits: • 401k Retirement Savings Plan administered by Merrill Lynch, • Commuter Check Pretax Commuter Benefits, • Eligibility to purchase Medical, Dental & Vision Insurance through Eclaro If you feel you are qualified with the required skills and if you are interested, please free to send your word version most updated resume TAILORED to the job description above to or call (212)804-7476. Equal Opportunity Employer: Eclaro values diversity and does not discriminate based on Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status, in compliance with all applicable laws.

The Aspen Group (TAG) is one of the largest and most trusted retail healthcare business support organizations in the U.S. and has supported over 16,000 healthcare professionals and team members at more than 1,200 health and wellness offices across 46 states in four distinct categories: Dental care, urgent care, medical aesthetics, and animal health. Working in partnership with independent practice owners and clinicians, the team is united by a single purpose: to prove that healthcare can be better and smarter for everyone. TAG provides a comprehensive suite of centralized business support services that power the impact of five consumer-facing businesses: Aspen Dental, ClearChoice Dental Implant Centers, WellNow Urgent Care, Chapter Aesthetic Studio, and Lovet clinics. Each brand has access to a deep community of experts, tools, and resources to grow its practices and an unwavering commitment to delivering high-quality consumer healthcare experiences at scale. Job Overview: We are looking for a passionate and detail-oriented Software Quality Assurance Test Engineer to join our team. As a Test engineer, you will play a crucial role in ensuring the quality of our products by designing, developing, and maintaining automated tests, and working closely with cross-functional teams to deliver high-quality software. You will be involved in the complete software development lifecycle, helping us build reliable, scalable, and efficient applications. Key Responsibilities: • Test Automation Development: Design, implement, and maintain automated tests/framework for API-based applications using Python/Java/.net and deploy those tests as part of the build. Strong testing experience using SQL Server and performance testing, • Test Planning and Execution: Develop test plans, test cases, and test strategies for new and existing features. Execute manual and automated tests, ensuring the software meets both functional and non-functional requirements., • Collaboration: Work closely with developers, product managers, and other stakeholders to understand features and ensure testability. Collaborate with cross-functional teams to define, design, and ship new features while ensuring the highest quality., • Continuous Integration: Implement and maintain automated test suites in a continuous integration/continuous delivery (CI/CD) pipeline to ensure regular, consistent testing., • Performance Testing: Develop and execute performance and load tests to ensure that the product performs well under various conditions., • Defect Management: Identify, report, and track defects through resolution. Work with development teams to ensure timely resolution and retesting of bugs., • Monitoring: Monitor deployments. Work closely with SREs to collect this data and how the application works in “the real world”., • Best Practices: Promote quality engineering practices, including test-driven development (TDD), automation best practices and tools. Required Skills and Qualifications: • Strong experience with programming languages such as Java, Python, JavaScript, etc., • Strong experience testing against relational database (SQL, PostgreSql, SQL Server, DBeaver, Azure studio, MSSMS, etc.), • Experience with test automation frameworks (e.g., Pytest, Postman, Requests library, Playwright, TestNG, JUnit, Cypress, Appium)., • Knowledge of API testing tools (e.g., Postman, RestAssured, SoapUI)., • Familiarity with continuous integration tools like Jenkins, GitLab, or similar., • Available on an as-needed basis for non-working hours to support the deployment, • Testing Knowledge:, • Strong understanding of software testing methodologies, including unit, integration, functional, regression, and performance testing., • Experience in developing and maintaining test cases and automated test scripts., • Strong experience in SQL Server and API testing and automation., • Problem-Solving and Analytical Skills: Strong troubleshooting and analytical skills to find root causes of issues., • Collaboration: Ability to work in an agile team, collaborating with developers, business analysts, and other stakeholders., • Communication: Excellent verbal and written communication skills, with the ability to clearly document test results and defects. Preferred Qualifications: • 5+ years of experience in software quality assurance and testing., • Experience with cloud-based platforms (e.g., GCP,AWS, Azure)., • Familiarity with test management tools like Jira, Zephyr, etc., • Knowledge of performance testing tools (e.g., JMeter, LoadRunner)., • Experience in SQL and performance testing, • Familiarity with containerization and virtualization (e.g., Docker, Kubernetes)., • Bachelor's or Master's degree in Computer Science, Engineering, or a related field (or equivalent experience)., • Annual pay range: $80,000 - 110,000/year, • A generous benefits package that includes paid time off, health, dental, vision, and 401(k) savings plan with match, • This role is onsite in our Syracuse, NY office 4 days/week

POSITION TITLE Account Manager - Syracuse, NY and Surrounding Territory. This position directly reports to the President 📍 Note: Candidates must reside within the designated territory, have a valid driver’s license, and access to their own vehicle to travel to customer accounts. Relocation assistance is not available for this position. COMPANY OVERVIEW Bus Parts Warehouse (BPW) is a leading national distributor of critical, next-day replacement parts for school buses. Owned by private equity firm CoBe Capital for over 20 years, BPW serves school districts across the U.S. with a strong focus on safety, reliability, and speed. BPW has evolved from a traditional catalog-based aftermarket business to a modern e-commerce-focused enterprise with a state-of-the-art IT environment built on NetSuite's Suite Commerce platform. With a brand-new website and a robust operational foundation, BPW is poised to capitalize on its competitive advantages, including superior one-day UPS shipping capabilities from its planned new primary warehouse in Allentown, Pennsylvania, and its satellite location in Syracuse, New York. We invite you to learn more about our company by visiting . buspartswarehouse.com FUNCTIONS AND RESPONSIBILITIES The Account Manager will serve as the primary contact for a portfolio of school district and transportation clients, managing daily account activities, addressing inquiries, resolving issues, and ensuring high levels of customer satisfaction. This role involves building strong relationships, providing tailored solutions, and collaborating with internal teams to deliver excellent service. As BPW expands its e-commerce platform, the Account Manager will also play a key role in shaping customer engagement in a fast-paced, technology-driven environment. Specific Responsibilities include: • Manage and grow customer accounts and serve as the primary point of contact for day-to-day communications, • Build strong, lasting relationships with school districts, transportation directors, fleet managers, and procurement teams, • Understand client needs and recommend tailored solutions from our wide range of OEM and aftermarket school bus parts, • Respond to inquiries, resolve issues, and ensure on-time delivery and satisfaction, • Collaborate with internal teams to ensure seamless execution of orders and on-time delivery, • Track account performance, prepare activity reports, and identify growth opportunities, • Support adoption of BPW’s digital ordering platform and help clients transition from manual to e-commerce-based ordering PROFESSIONAL QUALIFICATIONS The ideal candidate will have 3–5 years of sales experience, with a proven track record in both acquiring new customers and growing existing client relationships. Additional/Preferred Experience: • Strong account management, relationship-building, and client satisfaction skills, • Excellent communication, problem-solving, and organizational skills, • Initiative to drive new sales and maintain strong relationships, • Experience in preparing reports and coordinating with internal teams., • Proficiency in Salesforce and CRM or ERP systems, (experience with NetSuite is a plus), • Ability to work independently and manage multiple tasks in a high-volume environment, • Experience in the automotive or parts industry is a plus EDUCATION Bachelor’s degree in Business Administration, Marketing, Sales, or related field preferred

Local Commercial Roll-Off Drivers In The Syracuse & Geneva, NY Area Make Up To $75,000 Per Year & $2,500 Sign On Bonus Must Have A Valid Class A or B CDL & 1 Year of Verifiable Driving Experience Must Have or Be Willing To Obtain A DOT Medical Card Manual Transmission Experience REQUIRED

HumanEdge Travel Healthcare is seeking a travel Radiology Technologist for a travel job in Syracuse, New York. • Specialty: Radiology Technologist, • Discipline: Allied Health Professional, • Start Date: 10/06/2025, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, • Employment Type: Travel Travel Radiologic Technologist – CT Location: Syracuse, NY Start Date: 10/6 Assignment Length: 13 weeks Shift: Evenings, 5x8s A facility in Syracuse, NY is seeking a Radiologic Technologist – CT with GE or Toshiba CT experience. Duties: * Perform radiographic examinations under the direction of departmental radiologists * Greet patients, explain procedures, position patients, and set appropriate exposure factors to obtain quality studies * Apply appropriate radiation safety and protection measures to minimize exposure * Operate imaging equipment efficiently and effectively; report equipment malfunctions to supervisor * Process films and input data into the Radiology Information System (RIS) for documentation and billing * Follow departmental procedures and protocols as outlined in the Policy and Procedure Manual * Provide radiologic examinations based on referring physician and radiologist needs Qualifications: * A.A.S. in Radiologic Technology or equivalent * NYS license/registration required * Minimum of 1 year CT/MRI experience as a Radiologic Technologist required * GE or Toshiba CT experience preferred For more information, contact HumanEdge Health: humanedgealliedhealth.com HumanEdge Travel Healthcare Job ID #12518. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Radiologic Technologist HumanEdge Allied Health is a full-service nursing and allied health staffing agency that has lived and breathed staffing for more than 30 years, making us one of the most trusted in the industry!

Local Commercial Roll-Off Drivers In The Syracuse & Geneva, NY Area Make Up To $75,000 Per Year & $2,500 Sign On Bonus Must Have A Valid Class A or B CDL & 1 Year of Verifiable Driving Experience Manual Transmission Experience REQUIRED What We Offer: Home Daily $2,500 Sign-on Bonus 401k Heal

Job Description Job Description Job Title: Warehouse/Delivery Employee Reports To: Currently to VP of Ops FLSA Status: Non-Exempt Summary: Responsible for maintaining stock inventory, pulling orders and making deliveries according to designated work orders by performing the following duties. Duties and Responsibilities include the following. Other duties may be assigned. 1. Assists in maintaining all stock inventories for warehouse. Marks and labels stock., 2. Follows flow chart procedures., 3. Fills work orders by obtaining the required merchandise and completing appropriate paperwork., 4. Assists with product and or material staging to include lifting and carrying cartons and placing them on appropriate shelves., 5. Maneuvers heavy materials with the use of fork lift, pallet and hand truck as required., 6. Unloads shipping trucks as required. Loads and unloads material., 7. Reports any concerns or material discrepancies to supervisor., 8. Delivers materials to job sites in a timely manner., 9. Operates company vehicle in a professional, safe and courteous manner., 10. Ensures delivery vehicles are clean and maintained in good working condition., 11. Maintains tools and equipment in a clean, orderly and safe manner., 12. Complies with company policies and procedures giving special attention to safety regulations., 13. Assists with warehouse maintenance including but not limited to groundskeeping, snow removal and basic building and equipment repair., 14. Performs other related duties as assigned. (Details regarding the above duties and responsibilities will be provided separately.) Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of employees or with customers. Mathematical Skills: Ability to add subtract, multiply and divide using whole numbers, common fractions and decimals. Ability to compute ration and percent. Ability to apply simple concepts of algebra and geometry. Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in oral, written, diagram or schedule form. Knowledge, Skills and Other Abilities: Oral Communication Skills Written Communication Skills Reading Skills Customer Relations Customer Service Math Aptitude Organization Time Management Dexterity Skills MS Office Applications Education/Experience: High School Diploma or Equivalent. Prior experience in warehouse and delivery preferred. Valid and clean driver’s license. Must be 21 or over and have had a driver’s license for 3 years to drive company vehicles. CDL license preferred but not mandatory. Must be able to pass a DOT physical every two years. Certificates and Licenses: · Valid driver's license, OSHA 10 hour card, Lull certification, Forklift certification (company will assist in obtaining these certifications if applicant doesn’t currently have them). Equipment: · Forklift · Pallet Jack · Electric Pallet Jack · Carpetcutting machine · Snowblower · Lawnmower · Weedwhacker · Lull Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to walk, use hands, reach with hands and arms, stoop, kneel, crouch or crawl, and talk or hear. The employee is frequently required to stand, sit, climb or balance. The employee must regularly lift and/or move 75 or more pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, ability to adjust focus, and ability to see color. Work Environment: While performing the duties of this job, the employee is regularly exposed to fumes or airborne particles, outdoor weather conditions, and vibration. The employee is occasionally exposed to toxic or caustic chemicals. The employee is occasionally exposed to risk of electrical shock. The noise level in the work environment is usually moderate. Additional notes, details or general expectations: I understand the job description of Warehouse/Delivery employee as described above and feel I can meet the requirements. I also understand company vehicles may not be driven at any time for personal use. Employee Name: _________________________ Signature:_____________________________________Date ________________ Job Summary We are seeking a reliable and motivated Local Driver to join our team. The ideal candidate will be responsible for transporting goods and materials to various locations while ensuring timely deliveries and maintaining high standards of customer service. This role requires a strong commitment to safety, efficiency, and professionalism. Responsibilities • Operate box trucks and other delivery vehicles safely and efficiently., • Load and unload goods, ensuring proper handling of items to prevent damage., • Follow designated routes for deliveries while adhering to traffic regulations., • Provide excellent customer service during interactions with clients and recipients., • Maintain accurate delivery logs and documentation., • Perform routine vehicle inspections and report any maintenance issues., • Assist in warehouse duties as needed, including inventory management and organization., • Proven experience as a delivery driver or in a similar role is preferred., • Familiarity with commercial driving regulations and practices is essential., • Experience in warehouse operations is a plus, including skills in heavy lifting and moving items efficiently., • Ability to operate manual transmission vehicles is advantageous., • Strong customer service skills with the ability to communicate effectively with clients., • Previous experience with route driving or as a courier is beneficial. Join our team as a Local Driver where your skills will contribute to our commitment to excellence in service delivery!

Job Description Job Overview HMD Trucking is hiring experienced CDL Class A drivers for Dry Van positions. We offer steady freight, strong pay, and full support for every mile. Qualifications * Active CDL Class A license * Minimum of 1 year of verifiable OTR driving experience * No DUI/DWI in the last 5 years * No excessive speeding (over 21 mph) in the last 3 years * No more than 3 moving violations or 3 preventable accidents Compensation and Bonuses Solo Drivers * Base pay: 60 cents per mile * Safety and productivity bonus: up to 10 cents per mile * Home time: 2 weeks out - 2 nights at home * 99% no touch * Weekly pay range: $1320-$2100 Team Drivers * Base pay: 77 cents per mile * Safety and productivity bonus: 5 cents per mile * Home time: 2 weeks out - 2 nights at home * 99% no touch * Weekly pay range: $3200-$4500 (split) Benefits * Medical, dental, and vision insurance * 401k retirement plan * Paid vacation and holidays * Orientation, clean inspection, and referral bonuses * Flexible home time * 24/7 support team * Ongoing training and development Equipment Drivers operate late-model trucks, including Peterbilt 579 and Freightliner Cascadia models, all less than 3 years old. Features include: * Automatic or manual transmission * High-roof sleeper cabins * Inverters and diesel-powered APUs * Mini fridges and storage * Comfortable combo sleeper * Removable rider seat HMD has an in-house maintenance team to ensure reliability and quick service turnaround. For pay details and benefits, visit: hmdtrucking.com/paydetails.

Job Description Job Overview HMD Trucking is hiring experienced CDL Class A drivers experienced with load securement and tarping for Flatbed positions. We offer steady freight, strong pay, and full support for every mile. Qualifications * Active CDL Class A license * Flatbed experience * Minimum of 1 year of verifiable OTR driving experience * No DUI/DWI in the last 5 years * No excessive speeding (over 21 mph) in the last 3 years * No more than 3 moving violations or 3 preventable accidents Compensation and Bonuses * Base pay: 65 cents per mile * Safety and productivity bonus: up to 5 cents per mile * Pay for every load,regardless of whether a tarp is needed * Home time: 2 weeks out - 2 nights at home * Weekly pay range:$1430-$2100 Benefits * Medical, dental, and vision insurance * 401k retirement plan * Paid vacation and holidays * Orientation, clean inspection, and referral bonuses * Flexible home time * 24/7 support team * Ongoing training and development Equipment Drivers operate late-model trucks, including Peterbilt 567 and Freightliner Cascadia models, all less than 3 years old. Features include: * Automatic transmission (manual also available) * Mid-roof sleeper cabins * Inverters and diesel-powered APUs * Mini fridges and storage * Comfortable combo sleeper * Removable rider seat HMD has an in-house maintenance team to ensure reliability and quick service turnaround. For pay details and benefits, visit: hmdtrucking.com/paydetails.

Job DescriptionDescription: JOB SUMMARY: Will provide technical customer support to new and existing customer base, establish relationships with customers while providing support related to technical design, system design, and document design and troubleshooting. Will work closely with and develop relationships external our sales team and perform administrative functions for warranty returns. ESSENTIAL JOB DUTIES: • Responsible for maintaining manuals, catalogs, brochures and other literature for the Sales/Marketing Department, as directed, • Provide technical assistance for the Airport, LIR FAM product lines as direct, • Research and develop new product application proposals, current product redesign and prototype proposals, • Provide technical representation for the Sales/Marketing Department. This will require travel to consultants, job site, contractors or regional FAA offices, • Interpret plans, specifications and drawjngs to determine product requirements and develop bills of materials, • Represent the Company at trade shows and other related marketing events., • Facilitates customer visits and/or visits customer sites to resolve technical issues., • Provide technical assistance for departmental and manufacturing personnel, • Responsible for working safely and being conscious of safety for co-workers, • Minimum two years of college in mechanical technology or related degree, • Must have ability to read and interpret drawings and blueprints, • Possess and demonstrate positive mentoring and leadership qualities., • Possess and practice superior oral and written communication skills., • Treat all co-workers with dignity and respect., • Possess and utilize basic math skills and exercise superior organizational skills, • Ability to work independently Advanced computer skills that include AutoCAD, CNC programming, _______, _______, and the ability to send/receive e-mail. Must be able to read, create and change blueprints and drawings. May be required to operate Printer, Copier, Fax Machine, Telephone, Scanner, and calculator, micrometers and gages, power tools, hand tools, forklifts and pallet jacks. SUPERVISORY RESPONSIBILITIES The Inside Sales – Customer Service Rep. does not have any direct reports or supervisory responsibilities. PHYSICAL ACTIVITIES AND DEMANDS: Moderate Lifting: Exerting up to 10 pounds of force frequently and/or up to 25 pounds of force occasionally and/or a negligible amount of force frequently to move objects. MENTAL AND VISUAL DEMAND: Close mental and visual attention to prepare and analyze data and figures, work on a computer, read, or control machines or processes at a rapid pace that requires close coordination and fine adjustment. Moderate mental and visual attention to direct manual work, machine operations, set-ups, inspections, and adjustments that require frequent decisions to detect and adjust for variance from proper operation. ENVIRONMENTAL CONDITIONS: Occupational Hazards – Work in an office environment where there is little exposure to changing temperatures, hazardous chemicals of moving parts. Safety Equipment - May wear a variety of PPE when visiting the production floor, including safety glasses with side shields, safety shoes and other PPE in accordance with work tasks. Production Environment – May visit the manufacturing environmental where the employee may encounter directly or indirectly, a variety of production machinery, transport equipment, welding work, and computerized equipment. During hot weather, work processes can produce condensation on the floor resulting in slippery conditions. Employees are required to wear steel toed, slip resistant shoes while working in production areas. EMPLOYER'S DISCLAIMER: • All requirements are subject to possible modification to reasonably accommodate individuals with disabilities., • This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor. Furthermore, the company reserves the right to add to or revise an employee's job duties at any time at its sole discretion., • This document does not create an employment contract, implied or otherwise, other than an “at will” employment relationship.

Apply or call today! Job Details: Solo Lease Purchase Positions Home time is up to you Bonus home time in short periods with CRST Get Thru Home program Driving lower 48 states Manual or Automatic Transmission trucks Driver assist position - loading and unloading freight Compensation & Benefits: Toll

The Welder is responsible for very precise TIG Welding / Fabrication of custom chambers and/or components using customer supplied drawings and/or blueprints while holding tolerances of +/-.Primary Responsibilities: Must be able to meet or exceed the requirement of the project through manual fabrica

Responsibilities can include duties aligned with shipping and/or receiving, processing incoming stock and materials, picking and filling orders from stock, packing and shipping orders, or managing, organizing and retrieving stock in the warehouse. Operate a manual/powered equipment to transport prod

The Welder is responsible for very precise TIG Welding / Fabrication of custom chambers and/or components using customer supplied drawings and/or blueprints while holding tolerances of +/-.Primary Responsibilities: Must be able to meet or exceed the requirement of the project through manual fabrica

By joining Numotion, you will be a part of the nation's leading provider of Complex Rehabilitation Technology.Numotion is helping thousands of people with individually configured, medically necessary mobility products and services.From manual and powered wheelchairs to disposable medical supplies th

Collaborating with department leaders and senior leadership, you’ll identify performance improvement opportunities and implement scalable solutions that reduce manual work and optimize operations.

Local Commercial Roll-Off Driver!.Earn up to $75,000 annually plus a $2,500 sign-on bonus!.Our ideal candidate will have:.At least 1 year of verifiable driving experience.A DOT medical card (must obtain if not currently held).Experience with manual transmissions.Health, dental, and vision insurance.

Local Commercial Roll-Off Drivers In The Syracuse & Geneva, NY Area.Make Up To $75,000 Per Year & $2,500 Sign On Bonus.Must Have A Valid Class A or B CDL & 1 Year of Verifiable Driving Experience.Must Have or Be Willing To Obtain A DOT Medical Card .Manual Transmission Experience REQUIRED!!!.Quar

To be successful as a Mover you must have stamina to perform manual duties that often require strength.You should also be able to plan the most efficient ways to pack items into the moving truck.Mover Responsibilities: Wrap furniture in protective material.Load, pack and unload items with care.Ensur

Job Description TITLE: Night Warehouse Manager SUPERVISOR: Operations Manager SHIFT: Sunday – Thursday, 4 pm – 1 am SALARY RANGE: $60,000 - $80,000 OBJECTIVE: Responsible for supervising the night functions of the warehouse, including managing proper order picking for the next day and proper loading and unloading of retail trucks. Ensuring employees are working in a manner that maximizes safety and productivity. RESPONSIBILITIES: • Directing workflow of order selectors, • Administer proper use of voice-pick application, • Supervision of staff in loading procedures, ensuring that all products are shipped accurately, • Communicate daily safety, service, and productivity statistics to hourly staff, • Account for all bulk orders as well as liquor orders and ensure that they are loaded properly, • Monitor and record all shift breakage and report to Inventory Manager, • Manpower and equipment planning of operations personnel for the upcoming week, • Ensure that accident/injury reports are filed promptly and accurately, • Ensure the proper upkeep of the warehouse, • Supervise and direct the activities of drivers in the warehouse, • Responsible for recording equipment defects, • Strong working knowledge of OSHA regulations and company SOPs, • Other duties as assigned ESSENTIAL JOB REQUIREMENTS: • Bachelor’s Degree in Business Management preferred, • Ability to work independently, • Ability to supervise 5 to 15 subordinates, • Excellent computer and Excel skills, • Strong communication skills, • Strong computer skills, • A willingness and ability to work flexible hours and weekends as needed, • Previous experience in a warehouse environment, • High attention to detail, • Self-motivated CRITICAL PHYSICAL DEMANDS: • Sufficient manual dexterity to operate business equipment including, but not limited to, computer keyboard, telephone, adding machine and copier, on an occasional basis, • Walking on hard surfaces, Climbing stairs and inclined surfaces frequently, • Frequent exposure to temperatures ranging from 30 - 100 degrees F on a seasonal basis, • Two-handed lifting of up to 40 pounds from floor to shoulder height on an occasional basis, • Two-handed lifting of kegs up to 160 pounds from floor to waist. Why join us? • Annual Salary Range: $60,000 - $80,000, • Medical/Dental/Vision Insurance - $0 in-network deductible, low premium contribution, • Paid Time Off, • Employee Assistance Program with Work-Life Services, • Tuition Assistance Program, • 401k Savings Plan with company match (after service requirement), • Discounted Pet Insurance, • Computer and cell phone plan discounts, • Supplemental Plans available: Disability, Life Insurance, Legal & Identity Protection, • This description is not intended as a written or implied contract and may be revised by the company at any time. Furthermore, no verbal contract by the supervisor or other company representative is binding and employment is at the will of the company. The Sheehan Family Companies are proud to be an equal opportunity employer. We believe in an inclusive culture that provides mutual respect with salary advancement based on merit and individual performance. Sheehan Family Companies is committed to equal employment opportunities and does not discriminate against any protected class. We do not discriminate on the basis of race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. #donotsponsor

FedEx - JobID: PDX_FEC_75B4D4CC-78D8-4E3A-AC9F-47EA4D758972_238748 [Warehouse Associate / Material Handler] As a Freight Handler at FedEx, you'll: Perform freight handling using appropriate motorized and manual equipment; Verify documentation matches freight description, using current electronic or

Reviews, interprets, and validates the loan documentation for each unique loan, assuring key provisions are documented as per M&T Legal guidance and as advised in the Outside Counsel Manual.

The Welder is responsible for very precise TIG Welding / Fabrication of custom chambers and/or components using customer supplied drawings and/or blueprints while holding tolerances of +/-.Primary Responsibilities: Must be able to meet or exceed the requirement of the project through manual fabrica

Individuals selected must be able to respond to emergency callout within 1 hour during inclement weather, including all snow and ice conditions, to be considered for this position.Duties include but are not limited to: Perform routine manual tasks requiring medium to heavy physical effort involving

Job Description Seeking a highly dependable Commercial Industrial Boiler Technician Apprentice to join our Syracuse, New York team! Our Company: Blake Thermal Sales & Service Inc. is the manufacturer's rep for Cleaver Brooks and Camus boilers. Blake Thermal Sales & Service Inc. is a full-service thermal solutions company that supplies engineered products, services, and complete systems. Blake Thermal has a 98-year history of providing an array of products and services supporting steam, hot water for process and domestic heat for commercial, industrial, medical, educational and manufacturing facilities. Headquartered in East Windsor, CT, Blake Thermal maintains multiple locations across New York and New England. • Sole focus on integrating and supplying engineered products, services, and complete thermal systems, • Longstanding relationship as a manufacturer's representative with a 98-year history Ideal Candidates will be in alignment with Blake Thermal's Core Values: • Customer Focused, • Opportunity is Earned, • Solutions Provider, • Trustworthy, • Driven to Succeed You're smart, love to learn your trade, aren't afraid of hard work, and believe that with the right training and support, you could become a highly qualified professional. For this position, we are seeking an exceedingly ambitious apprentice to be trained for the role of Commercial Industrial Boiler Technician. Ideal candidates are eager to gain education and develop practical skills, participate in training on and off the jobsite, observe all safety codes, complete assessments, and carry out as assigned. To be successful as an apprentice, you must have great customer service skills as well as a drive for high-quality results. Outstanding apprentices are those who are quick-learners, excellent communicators and take pride in representing themselves and Blake in the most professional way. Responsibilities: • Actively participate in a variety of training and educational opportunities with interim assessments., • Assist within the department, developing new skills and capabilities within the Thermal Energy and Manufacturers Representative industry., • Observe and adhere to all safety procedures., • Complete all assessments, presentations, and other required evaluations of an apprentice., • Keep an open mind when receiving feedback and constructive criticism., • Communication with manager and colleagues on a day to day basis., • High school diploma or GED., • Must maintain a valid Driver's License to drive rental vehicles & be able to pass a DOT physical for driving fleet vehicles as required. A CDL is not required., • Maintain company provided equipment, tools, and/or fleet vehicle as per company policy., • Possess a can-do attitude when approaching new and exciting challenges., • Ability to multitask., • Attention to detail., • Must be at least 18 years old., • Pass a pre-employment drug test and criminal background check., • Moderate to occasional heavy physical demand with exposure to dust in the warehouse, hot and cold climates, inside and outside exposure when on the job, odors and noise may also be present., • Ability to lift up to 75 pounds., • Stand, reach, bend, squat, push, pull and move about the facility or job-site., • Walk or stand at least 8+ hours per day, often ascends/descends ladders or steps on job-site., • Professional experience within the trade of Commercial Industrial Boiler Technician., • Opportunity to build a career in this industry., • Compensation commensurate with experience., • Periodic compensation increases with completion of advanced training modules. Blake Thermal Sales & Service, Inc. is an equal opportunity and affirmative action employer. We do not discriminate by race, color, gender, sexual orientation/ gender identity, religion, ethnic or national origin, sex, age, disability status, or status as a covered veteran. Blake Thermal Sales & Service, Inc. is a proud drug-free workplace.

Local Commercial Roll-Off Drivers In The Syracuse & Geneva, NY Area.Make Up To $75,000 Per Year & $2,500 Sign On Bonus.Must Have A Valid Class A or B CDL & 1 Year of Verifiable Driving Experience.Must Have or Be Willing To Obtain A DOT Medical Card .Manual Transmission Experience REQUIRED!!!.Quar

Cardinal Health - Warehouse Associate II. What Warehouse Operations Contributes to Cardinal Health. Warehouse Operations is responsible for performing a combination of manual or automated tasks necessary for the receipt, storage, and shipment of product.

Individuals selected must be able to respond to emergency callout within 1 hour during inclement weather, including all snow and ice conditions, to be considered for this position.Duties include but are not limited to:.Perform routine manual tasks requiring medium to heavy physical effort involving

Local Commercial Roll-Off Drivers In The Syracuse & Geneva, NY Area.Make Up To $75,000 Per Year & $2,500 Sign On Bonus.Must Have A Valid Class A or B CDL & 1 Year of Verifiable Driving Experience.Must Have or Be Willing To Obtain A DOT Medical Card .Manual Transmission Experience REQUIRED!!!.Quar

CDL Class A or B license; Hazmat and Tanker Endorsement preferred; Must be able to operate a manual transmission (10-speed or higher).

Perform freight handling using appropriate motorized and manual equipment, including but not limited to: forklift, pallet jack and hand truck.

Individuals selected must be able to respond to emergency callout within 1 hour during inclement weather, including all snow and ice conditions, to be considered for this position.Duties include but are not limited to: Perform routine manual tasks requiring medium to heavy physical effort involving

Job Description At Danforth, we are committed to fostering education and growth by offering an immersive learning experience for students eager to explore and gain practical experience in project management within the mechanical contracting industry. Kick-Start Your Career Are you ready to embark on an exciting journey in mechanical contracting? As a Construction Management Intern at Danforth, you will be part of our Project Management group and report directly to an assigned Project Manager/Mentor. You’ll gain hands-on exposure to real projects while learning and applying JW Danforth Standard Operating Procedures outlined in our Project Management Manual. Your responsibilities will include supporting the Project Team in the execution of project tasks and milestones—ranging from pre-construction planning and document control to installation status monitoring and labor productivity measurement. Program Highlights As an intern, you will: • Support Foremen and Field Teams by coordinating tools, materials, equipment, and schedules., • Gain exposure to Lean construction principles and learn how time, materials, and milestones impact project success., • Collaborate with Shops on fabrication opportunities and improve scheduling/planning processes., • Identify project inefficiencies and assist with performance tracking., • Participate in project, client, and internal process activities (Procurement, CAD, Document Control, Change Proposals, Closeout). Experience & Competencies • Willingness and ability to learn., • Strong organizational skills., • Integrity, punctuality, and enthusiasm to represent Danforth to our customers., • Excellent communication and collaboration skills., • Enrollment in an accredited 2- or 4-year Construction Management degree program. Why Join Us? This internship is designed to empower you with the knowledge, skills, and confidence to thrive in the mechanical contracting field. By working on meaningful projects and gaining hands-on experience, you’ll build a solid foundation for your future career. If you’re ready to take the first step toward a rewarding career, we’d love to welcome you to our team! John W. Danforth Company is an equal opportunity employer and is committed to a workplace free from discrimination. All employees and applicants for employment will be considered without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description 3rd Shift Assembler Days: Monday-FridayHours: 10:30pm until 7:00am ( hours may change)Pay: $16.50 per hour Staffworks is seeking a reliable 3rd Shift Assembler to join their award-winning team! What's in it for you? • Temp to Hire, • Weekly Pay, • Performs mechanical and electrical assemblies and subassemblies, using hand tools and other necessary equipment., • Responsible for using appropriate gauging equipment as directed., • Completes all required paperwork including work cards indicating how many parts are made and appropriate job number., • Fills out scrap tickets by following the proper company procedure., • Verifies parts in bin against the applicable shop order methods., • Sorts parts as required., • Detects and reports defective material, machine defects, or questionable conditions to the Line Leader/Section Leader., • Maintains work area and equipment in a clean and orderly fashion, abiding by company rules and safety regulations., • Ability to read, write, and communicate in English., • Ability to follow and execute detailed processes/directions., • Ability to work effectively in a team environment in a culturally diverse workplace., • Hand-eye coordination and bi-manual dexterity sufficient to work with small parts, • A normal range of hearing and eyesight to focus on tasks, • The ability to stand and/or sit for long periods of time

Job DescriptionBenefits/Perks • Flexible Schedule, • Competitive Pay, • Read and understand complex manuals, drawings, and schematics, • Precisely measure components to ensure fit, • Modify components to meet required specifications, • Put parts together to create more complex pieces, • Maintain a high level of quality control, • Keep detailed records, • Perform routine maintenance tasks to keep equipment in working condition, • Report on any equipment issues or defective partsQualifications, • High school diploma or GED, • Certification or diploma from a technical school is preferred but not required, • Previous experience as an Assembler or in a similar role, • Ability to read and understand blueprints and schematics, • Ability to operate machinery and use hand tools, • Strong understanding of quality control principles, • Excellent manual dexterity and hand-eye coordination

Job DescriptionAssemblerHours: 1st shift: 8:00 a.m. - 4:30 p.m. with 4 hours overtime on SaturdaysPay: $15.00-$18.00/hour depending on experience What's in it for you?Temp to HireGreat Starting RateWeekly Pay Assembler Details: • The Assembler will be doing small iron soldering & resistance soldering for the process of circuit board assembly., • Coil handling (stripping, shaping, winding), • Electro/Mechanical Assembly, • Will follow instructions provided on the assembly process., • Candidates need to have good manual dexterity, • Ability to manipulate parts of 20 lbs. or less, • Must be able to use all equipment available such as lift tables, carts, and hand trucks, • Ability to read and comprehend instructions written in English (safety checklists, procedures, assembly drawings, etc.), • Working knowledge of hand tools (taps, drills, burrs, collets), • Ability to measure by steel rule and calipers (fractions & decimals)

Job Description United Radio is an employee-centric organization. We are building a team of people who share core values of positivity, exceptional work ethic and a commitment to working smarter to get the job done. With over 100 years in the industry with a reputation for technical expertise and the ability to offer customized solutions, United Radio delivers a variety of applications across a diverse mix of over 40 end markets in the US. United Radio’s headquarters are in Syracuse, NY with a secondary location in Peachtree City, Georgia. Summary Become part of the world standard in electronics remanufacturing by performing software updates, replace components, and test electronic modules to ensure complete repair on the latest electronic technologies. Full-time, Monday-Friday, 8:30am-5:30pm. $16.50-$18.50 an hour Essential Duties and Responsibilities include the following. Other duties may be assigned. • Some soldering of SMT (Surface Mount Component) chip components may be required., • Performs quality control test, manual or automated, on unit to the specification of the manufacturer., • Promote and adhere to United Radio’s Core Values., • Comply with United Radio's policies and procedures, and quality systems. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or experience • Excellent organizational skills and attention to detail., • Excellent written and verbal communication skills., • Basic knowledge of the Microsoft Office Suite or similar software., • Basic understanding of mathematical concepts., • Define problems, collect data, establish facts, and draw valid conclusions., • Ability and desire to learn new skills., • Detail oriented., • Ability to work independently as well as with a team., • Prioritize duties and responsibilities appropriately. United Radio is proud to be an equal opportunity workplace free from discrimination and harassment. We seek to recruit and retain the most talented people from a diverse candidate pool and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other disability protected by law. All employment is decided based upon qualifications, merit, and business need.

Job DescriptionSalary: $31.46-$34.48 Who is CenTrio? CenTrio is a fully integrated, innovative and sustainable energy services provider to a wide range of industries such as higher education & healthcare campuses, cities, and communities. It serves more with utility infrastructures serving more than 170+ million square feet of space and operations in 10 cities across the United States and growing. In each community, the company operates highly efficient and innovative utility infrastructures that produce and distribute electricity, steam, hot water and/or chilled water to customer buildings and campuses. Customers connected to these systems enjoy multiple benefits including reduced operating costs, lower emissions and unmatched reliability. CenTrio is a wholly owned subsidiary of a global Infrastructure Investment Consortium with unmatched financial wherewithal and manages a portfolio of long-life, high quality infrastructure assets with high barriers to entry that generate stable and growing cash flows. Job Summary The Operator will be a key member of the Companys Operations team, reporting directly to the Operations and Maintenance Manager. The group operates under a flat structure, and the successful candidate will have regular visibility and direct access to the Director of Operations. The successful candidate will be a critical member of the team, ensuring the successful execution of providing our customers with steam and chilled water on a 24/7/365 basis. Operators work 12-hour shifts alternating every two weeks between days and nights and include weekends. The successful candidate will be expected to work well as part of a team, be a self-starter that enjoys working in a fast-paced environment, have strong commitment to deadlines and team, is process oriented with a high sense of ownership in their work, possesses a high degree of intellectual curiosity, and has a superior knowledge of steam and chilled water systems. Core Responsibilities • The Operator will perform all duties as assigned - Operates, maintains, and troubleshoots equipment of a steam and chiller plant and the distribution systems, • Works with management and peers to Identify and scope out opportunities to maximize production, minimize operating costs and eliminate downtime, • Maintains proper documentation, including operating logs, maintenance records and safety & environmental reports, • Keeps Manager, control room and other operators and peers are fully informed of unusual plant conditions and current job progress as the job relates to facility operations when assigned on-shift and transitioning shift., • Commitment to following all applicable company and client policies, procedures and work rules, and modeling appropriate actions and behaviors, • Participates in training on operating policies and procedures, • Performs chemical tests on boilers, condensate and cooling water and adjust to designated test levels, • Regenerate softeners, • Work in confined spaces, such as boilers, vaults and work from ladders, scaffolds, catwalks, etc., • Transferring chemicals into storage tanks, • Monitors the plant control system via computer screens and equipment gauges, • Perform continuous improvements on the appearance of the plant facility including snow removal as needed., • Additional duties include, but are not necessarily limited to starting and stopping plant equipment as needed; diagnosing and correcting problems in equipment and auxiliaries; changing oil, lubricating bearings and filling station logs, receiving deliveries Working Style to Be Successful in This Role: • Highly analytical with a keen attention to detail, • Demonstrates exceptional initiative and execution skills, • Strong oral and written communication abilities, • Collaborative with excellent interpersonal skills, • Capable of developing and maintaining positive relationships internally and externally, • Adapts quickly in a dynamic, complex, and fast-paced environment, managing changing priorities effectively, • Delivers high-quality work with speed and accuracy, • Self-motivated and proactive, able to work independently with minimal supervision Professional Experience & Knowledge: • Undergraduate degree with relevant technical discipline with 1 year of experience in operating and/or maintaining of combined or simple cycle power plant or other heavy industrial energy plant or High School Diploma with 3 years plant experience, • Individuals having served in the United States Navy for a period of 4 (four) or more years as a boiler technician, machinist's mates, or engineering lab technicians will be considered eligible by the company for a Shift Operator position., • Knowledge of the purpose and function of electronic and pneumatic control panels, and ability to read and interpret charts, tables, measuring equipment, and gauges are required, • Highly analytical with great attention to detail, • Collaborative and interpersonal skills, • A process-focused individual with a passion to drive and deliver effective change, • Self-motivated and proactive, with respect to both managing workload and professional development, • Ability to work in a dynamic, complex, fast-paced environment, to adapt quickly and to manage changing priorities Physical Requirements: • Must be able to work in tight spaces and elevated positions: twisting, turning, bending, and holding arms at / above the head are all common movements; able to lift up to 50lbs., • Requires sitting at computer screens for long periods of time, • Capable of operating heavy equipment such as a forklift and variety of hand and power tools, • Must be able to clearly see and differentiate all colors, • Must be able to maintain standard threshold of hearing to safely perform job duties, • Must have good eyesight, hearing and manual dexterity, • Wear all types of PPE including hearing protection, eye protection, all types of hand protection, steel toe foot wear, head protection, wear fall-protection, half-face and full-face respirators Conditions of Employment: • Valid New York State Drivers License, • Only authorized employees are permitted to use company vehicles, this includes Industrial trucks (forklifts, scissor lifts, etc.) and electric vehicles/golf carts. To be an authorized employee, you must be at least 21 years old, hold a current valid State Drivers' license and demonstrate a clean driving record. The driver must be on an approved list for company insurance purposes. Your driving record will be screened as part of the pre-employment process and annually in December., • All certifications/licenses must be up to date, • CenTrio strives to create a culture of health and wellness. As of December 1, 2021, and consistent with applicable state law, CenTrio will decline to hire individuals who use nicotine products. (WASHINGTON, COLORDAO, MICHIGAN, and TEXAS) Why Join CenTrio? CenTrio offers a dynamic and friendly work environment, dedicated to nurturing a top-notch team culture! Additionally, CenTrio offers an array of fabulous benefits and perks. • Medical Benefits first day of hire, • Medical, dental, vision, Life & AD&D benefits, • Option of supplemental Life & AD&D benefits, • Company paid High-Deductible Healthcare Benefit Plan, • 401k plan with % match, • Training Opportunities and career progression, • Competitive salaries that reflect the value of skills and experience, • Dynamic and friendly work environment in a rapidly expanding industry with a national presence, • Remote, Hybrid, and In Office schedules available dependent on job responsibilities, • 24-hour Employee Assistance Program/Hotline, • Corporate discounts (Travel, Entertainment, Home, Auto, Apparel, Health and Wellbeing, and other various retail options) Health, Safety & Environment (HSE) CenTrio maintains a steadfast commitment to a proactive safety culture, with HSE being a collective responsibility throughout the organization. Your HSE accountability also encompasses: • Promote, ensure, and maintain a safe and healthy environment for your fellow workers and yourself so that everyone goes home injury-free, • Work in compliance with the provisions of the Occupational Health and Safety Act, Industrial Regulations, Environmental Protection Act and Regulations and HSE policies, programs, and procedures, • Responsible for identifying and reporting workplace HSE hazards and concerns to your supervisor immediately and providing solutions (if aware of any) to address these concerns as requested, • Immediate reporting of all work-related injuries/illness to your supervisor, • Adhere to various PPE requirements of the position which may include hearing protection, eye protection, hand protection, steel toe footwear, head protection, fall-protection, respirators (half-face and full-face) DISCLAIMER The preceding position description is intended to provide the general nature and level of work to be performed by employees within this classification. It is not intended to be a detailed description of the position or be interpreted as a comprehensive listing of all duties, responsibilities, and qualifications required for this position. DIVERSITY STATEMENT We know that our greatest strengths come from the people who make up our team. CenTrio is committed to the creation and nurturing of a diverse community of individuals through inclusive excellence. Diversity involves recognizing the value of differences and the inclusion of all members of the community including those that experience discrimination or under representation. This is a core value of the organization as we strive for a culturally diverse work force that reflects the multicultural nature of the nation and our world and brings unique strengths and abilities which contribute to CenTrio.

Job DescriptionAssembly Days: Monday-Friday, Hours: 1st Shift - 6:00am-2:30pm2nd Shift - 3:45pm-12:15pm3rd Shift - 10:30pm- 7:00am (Must train on 1st Shift) Pay: $15.00/hour Staffworks is seeking a reliable Insert job title to join their award-winning team! What's in it for you?Weekly PayBenefits once hired onGreat starting rate Assembler Details: Performs mechanical and electrical assemblies and subassemblies, using hand tools and other necessary equipment. Responsible for using appropriate gauging equipment as directed. Completes all required paperwork including work cards indicating how many parts are made and appropriate job number. Fills out scrap tickets by following the proper company procedure. Verifies parts in bin against the applicable shop order methods. Sorts parts as required. Detects and reports defective material, machine defects, or questionable conditions to the Line Leader/Section Leader. Maintains work area and equipment in a clean and orderly fashion, abiding by company rules and safety regulations. Performs all other duties as assigned. Assembler Qualifications Ability to read, write, and communicate in English. Ability to follow and execute detailed processes/directions.Ability to work effectively in a team environment in a culturally diverse workplace. Working Conditions: Work is normally performed in a loud manufacturing environment subject to fluctuations in temperature. Physical Demands: Physical requirements needed to perform the job are eye-hand coordination and bi-manual dexterity sufficient to work with small parts, a normal range of hearing and eyesight to focus on task, the ability to stand and/or sit for long periods of time, and the ability to lift, push and pull up to 25 pounds of material. We are an Equal Opportunity Employer and celebrate diversity at all levels of our organization. How to Apply: (315) 455-9675

Job Description INTRODUCTION Company Overview: This position is available with Upstate HomeCare, a BioMatrix company. BioMatrix is a nationwide, independently-owned infusion pharmacy with decades of experience supporting patients on specialty medication. Our compassionate care team helps patients navigate the often-challenging healthcare environment. We treat our patients like family and get them started on therapy quickly. We work closely with them as well as their family and their healthcare providers throughout the patient journey, staying focused on optimal clinical outcomes. At BioMatrix the heart of our Inclusion, Diversity, Equity, & Access (IDEA) philosophy is the commitment to cultivate a welcoming space where everyone’s contributions are acknowledged and celebrated. Our goal is to draw in, develop, engage, and retain talented, high-performing individuals from diverse backgrounds and viewpoints. We believe that both respecting and embracing diversity enriches the experiences and successes of our patients, employees, and partners. Schedule: Monday Through Friday From 8:30am Eastern Standard Time To 5pm Eastern Standard Time Work schedule is subject to change based on business needs. Location: Upon successful completion of on-site training, it is anticipated that an incumbent in this role will work in a hybrid capacity in the Syracuse, NY-area with occasional travel required. Work location is subject to change based on business needs. Job Description: The Nursing Administrative Coordinator will provide various supportive services within the Nursing Department. This position involves maintaining accurate and timely deposits, confirming delivery tickets with month end goals, maintaining office supply inventory for nursing, and assembling set up packets. Performing support and assistance as requested. QUALIFICATION REQUIREMENTS • High school diploma or GED required, • Minimum of two (2) years of professional clerical/receptionist experience required, • Excellent time management, communication, interpersonal communication, organizational and analytical skills, • Skills with prioritization and multi-tasking, • Proficiency with problem resolution, • Self-motivated and self-disciplined, • Computer aptitude, • Associate’s degree preferred, • Providing excellent duties by:, • Answering calls within three rings and properly introducing self in a pleasant clear voice, • Returning phone messages or other communications promptly, avoiding personal calls (or minimizes) to allow customer access to, • business lines, • Taking messages, following special requests as given, • Provides efficient and productive company support by:, • Understanding task requirements, • Completing duties thoroughly, professionally and efficiently, • Maintaining correspondences/requests in confidence, • Enter, update, and maintain all nursing schedules, • Manage nursing visits to include care plans and appropriate visit forms, • Keeping appropriate files (electronic/paper) as requested, • Maintaining office supply inventory for Infusion office and nursing needs, • Track, manage, and fax all Clinical Plans of Treatment, • Manage billing out of AlayaCare and into CPR for all nursing service visits, • Track completion of all nursing forms, • Setting up patients in AlayaCare documentation system, • Coordinating receipt of completed admission information with appropriate clinical/delivery staff; scan documents to CPR+, • Maintaining a level of proficiency in CPR+ computer program for sufficient support to all departments as needed, • Special projects support requested by various departments, • Other projects/tasks as assigned by Nurse Manager and/or Supervising Pharmacist, • Assisting with maintaining Clinical Patient Census List for all branches/locations, • Responsible for tracking and submitting to billing nursing delivery tickets for infusion, • services, • Improve departmental productivity and efficiency by:, • Complying with requests, memos and/or policy changes, • Volunteering or initiating assistance in other activities (not listed in JD) when it is beneficial to the company, • Participating in proactive team efforts to achieve departmental and company goals, • Communicating clearly and effectively verbally and in writing, • Demonstrating ability to efficiently manage multiple tasks, • Exhibits exceptional work ethics by:, • Not being wasteful or abusing branch/region resources (vehicles, buildings, equipment, supplies, phones, utilities, time at work and time absent from work, etc.), • Presenting fair and honest reports of expenses (travel, gas, on call, etc.), • Following through timely with commitments, • Presenting ideas and solutions to customers and/or operating problems, • Allowing others to speak without interruption, • Asking clarifying questions and showing consideration of others’ comments, • Using proper grammar, a respectful tone and language free of prejudice, harassment, profanity or ill will connotations, • Returning phone messages promptly, responding calmly to angry or upset callers, • Attempting to resolve conflict without 3rd party intervention, refraining and discouraging gossip, and portraying the company in a positive light to customers and co-workers, • Follows departmental/ company policies by:, • Adhering to policy and procedure set up company wide and interdepartmentally Communication Skills • Oral Communication - Speaks clearly and persuasively in positive or negative situations; listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings., • This position requires constant sitting with occasional walking, standing, kneeling or stooping., • This position requires the use of hands to finger, handle or feel objects and the ability to reach with hands and arms., • This position requires constant talking and hearing., • Specific vision abilities required by this job include close vision and the ability to adjust focus., • This position must occasionally lift and/or move up to 20 pounds, • Required to move/lift physical hardware. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. If needing a reasonable accommodation within the application process, please contact the BioMatrix People & Culture team at or 954.385.7322 x 1425. While performing the duties of this job, the employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop, kneel, crouch or crawl; talk or hear; taste or smell. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. OTHER • Will participate in legal and ethical compliance training each year., • Will consistently behave in compliance with the BioMatrix, LLC’s legal and ethical policies and procedures., • Will abide by the policies of BioMatrix, LLC as set forth in the Compliance Manual., • Will not participate in any conduct considered to be unethical or illegal. EXPECTATION FOR ALL EMPLOYEES Supports the organization's mission, vision, and values by exhibiting the following behaviors: integrity, dedication, compassion, enrichment and enthusiasm, places patients first, is all-in with stacked-hands, and is focused on relentless consistency wins. GENERAL INFORMATION: The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this position. They are not intended to be an exhaustive list of all duties, responsibilities, and skills required of personnel so classified. The incumbent must be able to work in a fast-paced environment with demonstrated ability to juggle and prioritize multiple, competing tasks and demands and to seek supervisory assistance as appropriate. Incumbents within this position may be required to assist or find appropriate assistance to make accommodations for disabled individuals in order to ensure access to the organization's services (may include: visitors, patients, employees, or others). All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job Description INTRODUCTION Company Overview: This position is available with Upstate HomeCare, a BioMatrix company. BioMatrix is a nationwide, independently-owned infusion pharmacy with decades of experience supporting patients on specialty medication. Our compassionate care team helps patients navigate the often-challenging healthcare environment. We treat our patients like family and get them started on therapy quickly. We work closely with them as well as their family and their healthcare providers throughout the patient journey, staying focused on optimal clinical outcomes. At BioMatrix the heart of our Inclusion, Diversity, Equity, & Access (IDEA) philosophy is the commitment to cultivate a welcoming space where everyone’s contributions are acknowledged and celebrated. Our goal is to draw in, develop, engage, and retain talented, high-performing individuals from diverse backgrounds and viewpoints. We believe that both respecting and embracing diversity enriches the experiences and successes of our patients, employees, and partners. Schedule: Monday Through Friday From 8:30am Eastern Standard Time To 5pm Eastern Standard Time Work schedule is subject to change based on business needs. Location: Upon successful completion of on-site training, it is anticipated that an incumbent in this role will work in a hybrid capacity from our location in Syracuse, NY on Mondays, Wednesdays, & Fridays while working from home on Tuesdays & Thursdays. Work location is subject to change based on business needs. Job Description: The Enteral Admission Coordinator is responsible for the processing and coordination of all new referrals with the main objective being to clear all patients prior to service in order to ensure proper payment in compliance within all legal and regulatory parameters. This person will ensure accurate, efficient and timely processing of new referrals for Enteral services to include, but not be limited to, obtaining all necessary supporting documentation, confirming insurance coverage, coding and pricing of products, documenting patient in applicable computer system, submitting for pre-authorization and coordinating of initial “pushing” of the referral. The Enteral Admission Coordinator provides support and works collaboratively with referral sources, hospital liaisons, the pharmacy, nursing, and billing and branch personnel. QUALIFICATION REQUIREMENTS • High school diploma or GED required, • Minimum of one (1) year of call center experience required, • Excellent management, communication, interpersonal, leadership, organizational and analytical skills, • Skills with prioritization and multi-tasking, • Proficiency with problem resolution, • Self-motivated and self-disciplined, • Computer aptitude, • Prior enteral or home Infusion experience on the provider or payer side preferred, • Minimum of two (2) years of experience with a home care company preferred, • Receiving new requests for services via phone, fax or other means, • Obtaining all information necessary to accurately process the referral according to established procedures, • Completing referral process within time frame required to meet the needs of the patient, family and referral source, • Accurately completing the patient record in applicable computer system to include all required demographics, insurance and clinical information; recording appropriate progress notes and alerts to present a clear concise picture of patient data, • Confirming insurance coverage for services requested; gathering detailed information regarding, but not limited to, eligibility, deductible, out of pocket, authorization requirements and patient obligations, • Communicating with referral source or liaison regarding, but not limited to, insurance coverage, information limitations and status of referral, • Obtaining insurance authorization when necessary; entering and documenting authorization according to established procedure; tracking authorizations due to expire and obtaining renewals as needed, • Assuring accurate and complete billing information is obtained and recorded to allow for timely claim submission and payment, thus reducing accounts receivable days outstanding, • Communicating any financial obligations to the patient or his/her designee; assuring their understanding and agreement to pay; establishing a payment method up-front, i.e. credit card, • Maintaining the pending referral log on a daily basis; attending rounds each morning prepared to discuss status of each patient, • Responding to requests for assistance from pharmacy billing and clinical personnel, • Remaining familiar with specific payer guidelines, requirements, • Consulting with VP of Clinical & Financial Services when faced with unfamiliar situations and when decisions outside of the Intake Representative’s scope need to be made, • Assisting with special projects and perform other duties at the discretion of the VP of Clinical & Financial Services, • Maintaining monthly Referral Census Log, • Serving as a company resource with regards to service processing and reimbursement, • Demonstrating a professional, cooperative and friendly attitude toward all internal and external customers and co-workers; demonstrating excellent customer service skills, • Using discretion in handling confidential matters, • Adhere to departmental/company policies and procedures by:, • Adhering to policies and procedures, • Adhering to regulations set forth by Medicare and Medicaid, • Adhering to regulations set forth by insurance carriers, • Adhering to regulations set forth in established company contracts, • Exhibits exceptional work ethics by:, • Not being wasteful or abusing branch/company resources (vehicles, building, equipment, supplies, phone, utilities time at work, time absent from work, etc.), • Presenting fair and honest reports of expense, • Following through timely on commitments, • Returning phone calls and e-mails promptly, • Being flexible and having the ability to prioritize, • Allowing others to speak without interruption, • Using proper grammar, a respectful tone and language free of prejudice, harassment, profanity or ill will connotations Communication Skills • Oral Communication - Speaks clearly and persuasively in positive or negative situations; listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings., • This position requires constant sitting with occasional walking, standing, kneeling or stooping., • This position requires the use of hands to finger, handle or feel objects and the ability to reach with hands and arms., • This position requires constant talking and hearing., • Specific vision abilities required by this job include close vision and the ability to adjust focus., • This position must occasionally lift and/or move up to 20 pounds, • Required to move/lift physical hardware. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. If needing a reasonable accommodation within the application process, please contact the BioMatrix People & Culture team at or 954.385.7322 x 1425. While performing the duties of this job, the employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop, kneel, crouch or crawl; talk or hear; taste or smell. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. OTHER • Will participate in legal and ethical compliance training each year., • Will consistently behave in compliance with the BioMatrix, LLC’s legal and ethical policies and procedures., • Will abide by the policies of BioMatrix, LLC as set forth in the Compliance Manual., • Will not participate in any conduct considered to be unethical or illegal. EXPECTATION FOR ALL EMPLOYEES Supports the organization's mission, vision, and values by exhibiting the following behaviors: integrity, dedication, compassion, enrichment and enthusiasm, places patients first, is all-in with stacked-hands, and is focused on relentless consistency wins. GENERAL INFORMATION: The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this position. They are not intended to be an exhaustive list of all duties, responsibilities, and skills required of personnel so classified. The incumbent must be able to work in a fast-paced environment with demonstrated ability to juggle and prioritize multiple, competing tasks and demands and to seek supervisory assistance as appropriate. Incumbents within this position may be required to assist or find appropriate assistance to make accommodations for disabled individuals in order to ensure access to the organization's services (may include: visitors, patients, employees, or others). All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.