Medical physics jobs in Scottsdale, ArizonaCreate job alerts

Job Description Position Overview The Calibration Technician A will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, Electrical -- DC/Low Frequency, Electrical, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy. The Calibration Technician Apprentice will identify and utilize appropriate manual and automated measurement procedures. This position will normally receive detailed instructions on work, acquire job skills, learn company policies and procedures to complete routine tasks, and work on assignments that are routine in nature where limited judgment is required. The Calibration Technician Apprentice will perform laboratory housekeeping and may be required to report opinions and interpretations. The position .is not required to modify methods, develop new methods or validate new methods. Responsibilities and Duties · Calibrate inspection, measurement, and test equipment (IM&TE) in one or more of the following disciplines – Acoustical, Chemical, Dimensional, Electrical -- DC/Low Frequency, Electrical -- RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, Time & Frequency, to ensure compliance with published specifications. · Collect, compile, measure, summarize, and record data gathered during calibration. · Identify IM&TE out-of-tolerance conditions and perform corrective action via adjustments, component replacement, correction factors, etc. Managers, and customers. · Identify and correct measurement errors, as applicable. · Prepare calibration reports and certificates. · Interact with other technicians, Customer Service Representatives, Account Managers, and customers · Other duties and responsibilities as may be assigned. Qualifications • Basic ability to troubleshoot repair, align and optimize precision equipment., • Must be able to perform general math and algebra functions., • Must have good interpersonal and customer service skills, • Knowledge of MS Office applications, • Must be a self-starter with innovation, integrity, and attention to detail with the ability to follow written procedures, • Ability to work in a fast-paced environment within multiple departments, • No previous calibration training required, • Minimum High School diploma or equivalent Physical Demands Must be able to lift up to 45 pounds without assistance. Occasional standing and bending are required and repetitive computer work. Working Environment Working primarily in a laboratory or manufacturing environment at a SIMCO location and/or customer site. Travel may be required to other domestic and possibly international locations What We Offer Full-time, exempt position, sign on bonus eligible Excellent benefits package Employer paid medical, dental, vision, disability, life insurance, retirement plan, employee funded pre-tax health, childcare spending accounts and tuition reimbursement Paid time off with vacation, sick and holiday leave SIMCO provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, SIMCO complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation, and training. About Us SIMCO Electronics is the leading provider of calibration and software services for test and measurement instruments used in technology organizations. To learn more about SIMCO Electronics please site our home page at: https://www.simco.com/. For the second year in a row, SIMCO has been named #1 on a list of "The Best Places to Work" in the Bay Area by the Silicon Valley Business Journal and San Francisco Business Times.

Job DescriptionShape the Future of Flight—Engineer Solutions That Keep Aircrafts Moving PDS Tech Commercial is partnering with a leading name in aviation to hire a skilled Product Review Engineer who thrives in fast-paced production environments. If you’re passionate about solving complex engineering challenges and ensuring the highest quality standards in aircraft systems, this is your opportunity to make a measurable impact on aviation excellence. Your Role & Impact As a Product Review Engineer, you will play a critical role in maintaining production momentum by evaluating and resolving discrepancies in electrical systems—specifically wire harnesses—during fabrication and installation. Your decisions will directly support aircraft quality, safety, and delivery timelines within a high-performance manufacturing environment. Location & Schedule Location: Mesa, AZ Schedule: 1st Shift – Friday through Sunday, 5:00 AM – 5:30 PM (3x12 schedule) Job Type: Full-time Consultant (12-month contract) Pay Rate: Starting at $52.46/hour What You’ll Do Apply Aviation Design Principles and Material Review Board (MRB) processes to resolve nonconforming products Review and disposition discrepancies in electrical wire harness fabrication and installation Provide on-site, real-time engineering support to production and operations teams Interpret and analyze electrical drawings, schematics, and technical specifications Collaborate cross-functionally to drive timely and effective engineering solutions Ensure compliance with design standards, quality requirements, and safety expectations Support production continuity by making accurate, detail-oriented engineering decisions Required Qualifications Bachelor’s degree (or higher) in Engineering, Computer Science, Mathematics, Physics, Chemistry, or related field Approximately 5+ years of relevant engineering experience Strong ability to interpret electrical diagrams, schematics, and specifications Knowledge of engineering principles in a production or manufacturing environment Willingness to work a 3x12 weekend shift (Friday–Sunday) in an operations setting Preferred Qualifications Experience with electrical fabrication and wire harness installation Familiarity with Commercial or Defense systems Knowledge of VC-25 or 747 aircraft design principles Prior Material Review Board (MRB) experience Strong troubleshooting and decision-making skills in a production environment Why Join Us At PDS Tech Commercial, you’ll work alongside industry leaders on cutting-edge aviation programs. We offer: A chance to contribute to high-profile aircraft production programs A focused 3-day work week, giving you more flexibility and work-life balance Competitive pay and the opportunity to grow your technical expertise A collaborative, innovation-driven culture where your contributions matter A commitment to quality, safety, and engineering excellence in everything we do Take Your Engineering Career to New Heights If you’re ready to apply your engineering expertise to real-world aviation challenges and make an immediate impact on production success, we want to hear from you. Apply today and join PDS Tech Commercial—where innovation meets flight. This position requires use of information or access to facilities subject to the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). These regulations may limit access of controlled technologies: 1) to U.S. Persons, including U.S. Citizens, lawful permanent residents, and other narrow categories including refugees and asylees, or 2) to certain foreign nationals that have received an export license. Pay Details: $52.46 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.pdstech.com/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job DescriptionSalary: If you love game programming and have a passion for education, UAT is the place for you! WhoWe Are: University of Advancing Technology(UAT) isan elite intimate private college in Tempe, AZ focused oneducating students in advancing technologywho desire to innovate in the areas ofemerging technology disciplines including Advancing Computer Science, Information Security, Game and New Media technologies. Living on campus, students are surrounded by a true living-learning technology environment that incubates their ideas into innovations that students can patent and take to market. Students must create an innovation project to graduate. We are an entrepreneurial, results-oriented company recognized for delivering high standards of innovation and service. As an organization designed to change the lives of some of the brightest young minds, we rely on the excellence of every member of our family to continuously exceed our own standards and our students expectations. WhoYouAre: Have you ever wanted to teach others about game programming? We aresearching for an addition to ourastounding team of faculty. You must be an expert in various programming languages and development techniques associated with game applications. An exemplary UAT instructor can relate their knowledge and experience in using both object oriented and scripting languages, while guiding our students through industry standard game engines such as Unreal and Unity. The instructor should be a wizard of many wands and be a master in PC, iOS, console and Android platforms. The instructor needs to be able to present on the theoretical aspects of game programming that include topics such as: game AI, collisions, input device integration, 2D graphics, 3D graphics, object transformations, database integration and optimization. The individual that joins the UAT family must be able to relate to our technophile, high performing, all-things-geek students, best practices associated with application development processes, such as agile models, along with documentation. We need a game-changing (pun intended) professor that will inspire our students and arm them with the skills theyll need to stay ahead of the game design industry. Don't have teaching experience - that's where we come in. UAT's team of faculty and staff will work with you as you: Essential Duties: • Facilitation of innovative student game projects, • Mentoring geeky technology driven students, • Development and delivery of collegiate learning experiences related to game programming, • Development of course materials related to college level game programming courses Skills and Education Required: • Industry experience developing computer game applications, • Skills in developing applications using both object oriented and script based tools, • Experience with application development approaches, • Game application documentation, • Development experience in PC, console and mobile platforms, • Experience working within game engines such as Unity, Unreal, etc., • Experience applying computer game concepts such as rendering, transformations, lighting, collisions, AI, UI and gameplay, • Experience with database integration into game applications, • Master's degree in Game Programming or related field with 18credit hours in game programming required, • 3+ years viable work/industry experience and academic credentials Key Responsibilities: • Develop and maintain game systems and mechanics for a variety of game genres and platforms., • Implement core gameplay features such as AI, character controls, physics, animations, and multiplayer systems., • Collaborate with designers and artists to create smooth, engaging, and immersive gameplay experiences., • Write clean, maintainable, and well-documented code in languages like C++, C#, or Python., • Optimize game performance for both high-end and low-end platforms, ensuring smooth frame rates and minimal loading times., • Design and implement efficient algorithms to solve complex in-game problems (e.g., pathfinding, AI decision-making)., • Use game engines such as Unity, Unreal Engine, or proprietary engines to implement gameplay features and tools., • Conduct unit testing, debug code, and perform integration testing to ensure stability and quality., • Stay up-to-date with emerging technologies in the game industry, including VR/AR, AI, and cloud-based gaming solutions. Preferred Skills & Qualifications: Note: A combination of the following skills is preferred; not all are required. • Proficiency in C++, C#, or other programming languages commonly used in game development, • Experience with game engines such as Unity, Unreal Engine, or Godot, • Strong understanding of 3D mathematics (linear algebra, vector operations, matrix transformations), • Knowledge of game physics, collision detection, and optimization techniques, • Familiarity with shader programming (GLSL/HLSL) and rendering pipelines, • Understanding of AI programming for games (pathfinding, decision trees, finite state machines), • Experience with multiplayer game programming and networking (client-server architectures, data synchronization), • Comfortable with version control systems (e.g., Git, SVN) and agile development methodologies, • Ability to work collaboratively in a multidisciplinary team, with strong communication skills, • Experience in VR/AR development and/or mobile game development is a plus Pedagogy: UAT's Synchronic Learning model is designed especially for students of advancing technology. Tailored to both undergraduate and graduate students, Synchronic Learning provides an education framework that prepares superior graduates to become tomorrows innovators. This model embodies UATs methodologies, curricula, and people dedicated to fostering an environment of innovation that promotes demonstrated mastery and job readiness. An integral part of this framework is SyncFlex, a flexible learning approach with an emphasis on mentored education that provides real project experience to cultivate superior graduates. Important Notes: Location Requirements: This is not a remote position; candidates must be willing to work in-person at our campus in Tempe, AZ. Adjunct Pay: $3,000 for in-person courses; $2,400 for hybrid/online courses Part-Time Pay: $42,500 - $55,000 dependent on Education and Experience Full-Time Salary + Benefits: $85k-$110k dependent on Education and Experience. • Medical insurance option with UAT covering 60% of the premium cost, depending on coverage selection., • UAT has your BACK, by covering 100% of the monthly premium for Short-Term and Long-Term coverage., • Dental, Vision, 401k, Life Insurance, and AD&D Options, • Over 15 Paid Holidays - we work hard, but give you that extra time to play hard as well!, • Competitive Employee and Dependent Scholarship Programs; we take pride in your educational background and look forward to supporting your families academic goals and endeavors., • Meal Benefit at University Caf. HANGRY? Never heard of here. Come get your lunch at the caf, on us, YUM!, • University Store Discount amongst other Discount Programs., • Positive, open, and transparent Work Environment and culture that includes Kudos Program, Casual Fridays and Select Work Weeks, Employee Wellness Activities, Bring your Pet to Campus, along with Summer and Winter Happiness Events., • Employee Training and Development: Essential Skills Modules are scheduled on the job, allowing for learning, working, and implementation. We do not discriminate on the basis of race, color, religion, national origin, sex, age, or disability. It is our intention that all qualified applicants be given equal opportunity and that selection decisions be based on job-related factors. UAT does not sponsor foreign visa's. Thank you for your understanding.

Job Description POSITION SUMMARY: Design Engineer position requires a knowledge of strain gages, Wheatstone bridge, and associated electronics including compensation techniques and use of signal conditioning. Also requires some familiarity with the different basic transducer designs and materials selection, a basic knowledge of machining capabilities and joining technologies. This position requires excellent communication skills for interaction with sales, engineering, manufacturing, and customers. The position will develop force and torque measurement solutions to meet customer needs. ESSENTIAL FUNCTIONS: • Responsible for all steps from concept thru production release of products for customer force and torque measurement requirements., • Production release will include variants of existing designs up thru the development of new models., • Participant and contributor to design review and design for manufacturability sessions., • Proposes improvements to existing force and torque measurement products including design changes, manufacturing methods, and materials used., • Responsible for the evaluation of new opportunities. Evaluates both financial and technical feasibility. Determines cost and non-recurring engineering charges for new product versions., • Supports production, repair, machining, and quality departments as a technical resource for various processes (welding, assembly, calibration) as well as part root cause failure analysis and the development of corrective actions., • Provides technical guidance to other engineers in product design, materials selection, bills of materials (BOMs), component stress analysis (FEA), electronic concepts associated with load cell and torque transducer compensation and signal conditioning., • Supports Sales with technical information and concept proposals., • Aides in the development of qualification plans and qualification testing of new products and processes. Analyzes data and reports on findings. COMPETENCIES: • Software: Excel, Word, CAD, FEA, and ERP software., • Excellent communication skills both verbal and written., • Able to tactfully and effectively communicate with key customers and those in the midst of resolving conflicts and product concerns., • Interpersonal skills to establish and maintain effective working relationships with customers, vendors, and across departmental lines., • Solid background of engineering mechanics and materials. REQUIRED EDUCATION/EXPERIENCE: • BS in Engineering, Physics, Chemistry, • 5 years minimum direct experience in design of strain gage-based measurement products., • Experience in both low (or prototype) and high-volume manufacturing environments. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear. The employee must be able to lift and/or move items over 35 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. AAP/EEO STATEMENT: All qualified applicants will receive consideration for employment without regard to race, color, religion, religious creed, sex, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, military and veteran status, marital status, pregnancy, gender, gender expression, gender identity, sexual orientation, or any other characteristic protected by local law, regulation, or ordinance. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Employment is contingent upon passing a background check and a drug screen. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice About Interface, Inc. Interface, Inc. leads the world in force measurement solutions; designing, manufacturing, and we guarantee the highest quality performance load cells, torque transducers, multi-axis sensors, and related instrumentation available. Our plant includes corporate offices, state of the art manufacturing facility, accredited calibration laboratory and multi-faceted machine shop. Our engineering team provides force measurement solutions to the aerospace, automotive, energy, factory automation, medical which includes the test and measurement industries as well. Interface products can measure from grams to millions of pounds in hundreds of models and physical sizes. By maintaining the entire process, from design, machining, strain gage manufacturing and assembly, and in our own facilities, we can ensure the highest degree of performance possible. Our reach and influence is global as the preeminent force measurement solutions supplier to Fortune 100 companies worldwide, including Boeing, Airbus, NASA, Ford, GM, Johnson & Johnson, National Institute of Standards and Technology (NIST), and National Metrology Institute of Germany (PTB) and thousands of certified calibration labs. Our in-house calibration labs, certified to ISO-17025 and ANSI Z540.1, support a variety of test standards including ASTM E74, ISO-376, and many others.

Job Description POSITION SUMMARY: Design Engineer position requires a knowledge of strain gages, Wheatstone bridge, and associated electronics including compensation techniques and use of signal conditioning. Also requires some familiarity with the different basic transducer designs and materials selection, a basic knowledge of machining capabilities and joining technologies. This position requires excellent communication skills for interaction with sales, engineering, manufacturing, and customers. The position will develop force and torque measurement solutions to meet customer needs. ESSENTIAL FUNCTIONS: • Responsible for all steps from concept thru production release of products for customer force and torque measurement requirements., • Production release will include variants of existing designs up thru the development of new models., • Participant and contributor to design review and design for manufacturability sessions., • Proposes improvements to existing force and torque measurement products including design changes, manufacturing methods, and materials used., • Responsible for the evaluation of new opportunities. Evaluates both financial and technical feasibility. Determines cost and non-recurring engineering charges for new product versions., • Supports production, repair, machining, and quality departments as a technical resource for various processes (welding, assembly, calibration) as well as part root cause failure analysis and the development of corrective actions., • Provides technical guidance to other engineers in product design, materials selection, bills of materials (BOMs), component stress analysis (FEA), electronic concepts associated with load cell and torque transducer compensation and signal conditioning., • Supports Sales with technical information and concept proposals., • Aides in the development of qualification plans and qualification testing of new products and processes. Analyzes data and reports on findings. COMPETENCIES: • Software: Excel, Word, CAD, FEA, and ERP software., • Excellent communication skills both verbal and written., • Able to tactfully and effectively communicate with key customers and those in the midst of resolving conflicts and product concerns., • Interpersonal skills to establish and maintain effective working relationships with customers, vendors, and across departmental lines., • Solid background of engineering mechanics and materials. REQUIRED EDUCATION/EXPERIENCE: • BS in Engineering, Physics, Chemistry, • 5 years minimum direct experience in design of strain gage-based measurement products., • Experience in both low (or prototype) and high-volume manufacturing environments. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear. The employee must be able to lift and/or move items over 35 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. AAP/EEO STATEMENT: All qualified applicants will receive consideration for employment without regard to race, color, religion, religious creed, sex, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, military and veteran status, marital status, pregnancy, gender, gender expression, gender identity, sexual orientation, or any other characteristic protected by local law, regulation, or ordinance. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Employment is contingent upon passing a background check and a drug screen. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice Company DescriptionAbout Interface, Inc. Interface, Inc. leads the world in force measurement solutions; designing, manufacturing, and we guarantee the highest quality performance load cells, torque transducers, multi-axis sensors, and related instrumentation available. Our plant includes corporate offices, state of the art manufacturing facility, accredited calibration laboratory and multi-faceted machine shop. Our engineering team provides force measurement solutions to the aerospace, automotive, energy, factory automation, medical which includes the test and measurement industries as well. Interface products can measure from grams to millions of pounds in hundreds of models and physical sizes. By maintaining the entire process, from design, machining, strain gage manufacturing and assembly, and in our own facilities, we can ensure the highest degree of performance possible. Our reach and influence is global as the preeminent force measurement solutions supplier to Fortune 100 companies worldwide, including Boeing, Airbus, NASA, Ford, GM, Johnson & Johnson, National Institute of Standards and Technology (NIST), and National Metrology Institute of Germany (PTB) and thousands of certified calibration labs. Our in-house calibration labs, certified to ISO-17025 and ANSI Z540.1, support a variety of test standards including ASTM E74, ISO-376, and many others.About Interface, Inc.\nInterface, Inc. leads the world in force measurement solutions; designing, manufacturing, and we guarantee the highest quality performance load cells, torque transducers, multi-axis sensors, and related instrumentation available. Our plant includes corporate offices, state of the art manufacturing facility, accredited calibration laboratory and multi-faceted machine shop.\nOur engineering team provides force measurement solutions to the aerospace, automotive, energy, factory automation, medical which includes the test and measurement industries as well. Interface products can measure from grams to millions of pounds in hundreds of models and physical sizes. By maintaining the entire process, from design, machining, strain gage manufacturing and assembly, and in our own facilities, we can ensure the highest degree of performance possible.\nOur reach and influence is global as the preeminent force measurement solutions supplier to Fortune 100 companies worldwide, including Boeing, Airbus, NASA, Ford, GM, Johnson & Johnson, National Institute of Standards and Technology (NIST), and National Metrology Institute of Germany (PTB) and thousands of certified calibration labs. Our in-house calibration labs, certified to ISO-17025 and ANSI Z540.1, support a variety of test standards including ASTM E74, ISO-376, and many others.

Job Description THIS POSTION IS FOR ACTIVE-DUTY MILITARY CANDIDATES ONLY The Department of Defense SkillBridge program is an opportunity for service members to gain valuable civilian work experience during their last 180 days. SkillBridge connects service members with companies in providing real-world job experiences. Position Overview The Calibration Technician C will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy. The Calibration Technician C will identify and utilize appropriate manual and automated measurement procedures. This position will normally receive no instruction on work, applying job skills and company policies and procedures to complete a wide range of difficult tasks, and working on assignments that are moderately complex in nature where judgment is required in resolving problems and making routine recommendations. The Calibration Technician C will perform laboratory housekeeping and may perform some administrative duties. The Calibration Technician C may be asked to report opinions and interpretations. Responsibilities and Duties • Calibrate inspection, measurement, and test equipment (IM&TE) in one or more of the following disciplines – Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency, in order to ensure compliance with published specifications, • Maintain primary and/or intrinsic calibration standards, • Maintain secondary and/or working calibration standards, • Perform maintenance, troubleshooting and repair of precision equipment, • Develop calibration procedures and methods, according to detailed specifications, blueprints, drawings, and other technical requirements, • Collect, compile, measure, summarize, and record data gathered during calibration., • Identify IM&TE out-of-tolerance conditions and perform corrective action via adjustments, component replacement, correction factors, etc, • Identify and correct measurement errors, as applicable, • Prepare calibration reports and certificates, • Adapt existing calibration equipment, standards, and techniques to accomplish unique measurements tasks for which they are not principally used, • Perform uncertainty evaluation and analysis for measurement standards and associated measurement processes, • Train subordinates in calibration concepts and procedures, • Interact with other technicians, Customer Service Representatives, Account Managers, and customers, • Other duties and responsibilities as may be assigned Qualifications • Minimum High School diploma or equivalent, • Must be able to perform general math and algebra functions, • Understanding of Basic Statistics, • Must possess good written and oral, communication skills, • Technical writing ability, • Intermediate ability to troubleshoot repair, align and optimize precision equipment, • Intermediate computer skills, • Proficient in use of MS Word and Excel, • Minimum three years of calibration experience some of which can be offset with formal metrology training, • Knowledge of Quality Management system (ISO 9001, ISO 17025 and ANSI Z540), • Must have great interpersonal and customer service skills, • Strong attention to details, • Must be a self-motivator, work as a team player, and follow written procedures Physical Demands • Must be able to lift up to 45 pounds without assistance, • Occasional standing and bending are required Working Environment Works primarily in a laboratory or manufacturing environment at a SIMCO location and/or customer sites Travel may be required to other domestic and possibly international locations What We Offer • Full - Time, non-exempt position, • Excellent benefits package includes; medical, dental, vision, disability, life insurance, 401(k) with company matching, employee funded pre-tax health, child care spending accounts and tuition reimbursement, • Vacation, sick and paid holidays SIMCO provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, SIMCO complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation and training. For the second year in a row, SIMCO has been named #1 on a list of "The Best Places to Work" in the Bay Area by the Silicon Valley Business Journal and San Francisco Business Times. To all recruitment agencies: SIMCO Electronics does not accept agency resumes. Please do not forward resumes to our jobs alias, SIMCO Electronics employees or any other company location. SIMCO Electronics is not responsible for any fees related to unsolicited resumes.

Job Description Position Overview The Calibration Technician C will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy. The Calibration Technician C will identify and utilize appropriate manual and automated measurement procedures. This position will normally receive no instruction on work, applying job skills and company policies and procedures to complete a wide range of difficult tasks, and working on assignments that are moderately complex in nature where judgment is required in resolving problems and making routine recommendations. The Calibration Technician C will perform laboratory housekeeping and may perform some administrative duties. The Calibration Technician C may be asked to report opinions and interpretations. Responsibilities and Duties • Calibrate inspection, measurement, and test equipment (IM&TE) in one or more of the following disciplines – Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency, in order to ensure compliance with published specifications, • Maintain primary and/or intrinsic calibration standards, • Maintain secondary and/or working calibration standards, • Perform maintenance, troubleshooting and repair of precision equipment, • Develop calibration procedures and methods, according to detailed specifications, blueprints, drawings, and other technical requirements, • Collect, compile, measure, summarize, and record data gathered during calibration., • Identify IM&TE out-of-tolerance conditions and perform corrective action via adjustments, component replacement, correction factors, etc, • Identify and correct measurement errors, as applicable, • Prepare calibration reports and certificates, • Adapt existing calibration equipment, standards, and techniques to accomplish unique measurements tasks for which they are not principally used, • Perform uncertainty evaluation and analysis for measurement standards and associated measurement processes, • Train subordinates in calibration concepts and procedures, • Interact with other technicians, Customer Service Representatives, Account Managers, and customers, • Other duties and responsibilities as may be assigned Qualifications • Minimum High School diploma or equivalent, • Must be able to perform general math and algebra functions, • Understanding of Basic Statistics, • Must possess good written and oral, communication skills, • Technical writing ability, • Intermediate ability to troubleshoot repair, align and optimize precision equipment, • Intermediate computer skills, • Proficient in use of MS Word and Excel, • Minimum three years of calibration experience some of which can be offset with formal metrology training, • Knowledge of Quality Management system (ISO 9001, ISO 17025 and ANSI Z540), • Must have great interpersonal and customer service skills, • Strong attention to details, • Must be a self-motivator, work as a team player, and follow written procedures Physical Demands • Must be able to lift up to 45 pounds without assistance, • Occasional standing and bending are required Working Environment • Works primarily in a laboratory or manufacturing environment at a SIMCO location and/or customer sites, • Travel is required to other domestic and possibly international locations What we offer • Full - Time, non-exempt position, • Excellent benefits package includes; medical, dental, vision, disability, life insurance, 401(k) with company matching, employee funded pre-tax health and tuition reimbursement, • Vacation, sick and paid holidays SIMCO provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, SIMCO complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation and training. About Us SIMCO Electronics is the leading provider of calibration and software services for test and measurement instruments used in technology organizations. To learn more about SIMCO Electronics please site our home page at: https://www.simco.com/. For the second year in a row, SIMCO has been named #1 on a list of "The Best Places to Work" in the Bay Area by the Silicon Valley Business Journal and San Francisco Business Times.

Position Overview The Calibration Technician C will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy. The Calibration Technician C will identify and utilize appropriate manual and automated measurement procedures. This position will normally receive no instruction on work, applying job skills and company policies and procedures to complete a wide range of difficult tasks, and working on assignments that are moderately complex in nature where judgment is required in resolving problems and making routine recommendations. The Calibration Technician C will perform laboratory housekeeping and may perform some administrative duties. The Calibration Technician C may be asked to report opinions and interpretations. Responsibilities and Duties • Calibrate inspection, measurement, and test equipment (IM&TE) in one or more of the following disciplines – Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency, in order to ensure compliance with published specifications, • Maintain primary and/or intrinsic calibration standards, • Maintain secondary and/or working calibration standards, • Perform maintenance, troubleshooting and repair of precision equipment, • Develop calibration procedures and methods, according to detailed specifications, blueprints, drawings, and other technical requirements, • Collect, compile, measure, summarize, and record data gathered during calibration., • Identify IM&TE out-of-tolerance conditions and perform corrective action via adjustments, component replacement, correction factors, etc, • Identify and correct measurement errors, as applicable, • Prepare calibration reports and certificates, • Adapt existing calibration equipment, standards, and techniques to accomplish unique measurements tasks for which they are not principally used, • Perform uncertainty evaluation and analysis for measurement standards and associated measurement processes, • Train subordinates in calibration concepts and procedures, • Interact with other technicians, Customer Service Representatives, Account Managers, and customers, • Other duties and responsibilities as may be assigned Qualifications • Minimum High School diploma or equivalent, • Must be able to perform general math and algebra functions, • Understanding of Basic Statistics, • Must possess good written and oral, communication skills, • Technical writing ability, • Intermediate ability to troubleshoot repair, align and optimize precision equipment, • Intermediate computer skills, • Proficient in use of MS Word and Excel, • Minimum three years of calibration experience some of which can be offset with formal metrology training, • Knowledge of Quality Management system (ISO 9001, ISO 17025 and ANSI Z540), • Must have great interpersonal and customer service skills, • Strong attention to details, • Must be a self-motivator, work as a team player, and follow written procedures Physical Demands • Must be able to lift up to 45 pounds without assistance, • Occasional standing and bending are required Working Environment • Works primarily in a laboratory or manufacturing environment at a SIMCO location and/or customer sites, • Travel is required to other domestic and possibly international locations What we offer • Full - Time, non-exempt position, • Excellent benefits package includes; medical, dental, vision, disability, life insurance, 401(k) with company matching, employee funded pre-tax health, child care spending accounts and tuition reimbursement, • Vacation, sick and paid holidays SIMCO provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, SIMCO complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation and training. About Us SIMCO Electronics is the leading provider of calibration and software services for test and measurement instruments used in technology organizations. To learn more about SIMCO Electronics please site our home page at: https://www.simco.com/. For the second year in a row, SIMCO has been named #1 on a list of "The Best Places to Work" in the Bay Area by the and .

Primary City/State: Mesa, Arizona Department Name: Banner Staffing Services-AZ Work Shift: Varied Job Category: Clinical Care A rewarding career that fits your life. Banner Staffing Services offers a world of opportunities to make an impact on one of the country’s leading health systems. If you’re looking to leverage your abilities – you belong at Banner Staffing Services. Location: Banner Estrella Medical Center - 9201 W Thomas Rd Phoenix, AZ 85037 Schedule: Varied Days and Shifts. STAFF MUST BE ABLE TO WORK ROTATING WEEKENDS, HOLIDAYS AND TAKE ONCALL SHIFTS, AS REQUIRED. Banner Staffing Services (BSS) offers Registry/Per Diem opportunities within Banner Health. Registry/Per Diem positions are utilized as needed within our facilities. These positions are great way to start your career with Banner Health. As a BSS team member, you are eligible to apply (at any time) as an internal applicant to any regular opportunities within Banner Health. As a valued and respected Banner Health team member, you will enjoy: • Competitive wages, • Paid orientation, • Flexible Schedules (select positions), • Fewer Shifts Cancelled, • Weekly pay, • 403(b) Pre-tax retirement, • Employee Assistance Program, • Employee wellness program, • Discount Entertainment tickets, • Restaurant/Shopping discounts, • Auto Purchase Plan Registry/Per Diem positions do not have guaranteed hours and no medical benefits package is offered. Completion of post-offer Occupational Health physical assessment, drug screen and background check (includes; employment, criminal and education) is required. Banner Estrella Medical Center was built in 2005 in west Phoenix to meet the health care needs of a growing West Valley community. A full-service medical campus, the 317 all-private bed hospital offers an array of medical services, including heart care, emergency services, general surgery, weight loss surgery, medical imaging, orthopedic surgery and a comprehensive maternity services program. We are committed to providing families with excellent care and service. We work hard at Banner Estrella to create an environment that offers comfort and healing to our patients and visitors. We strive to care with kindness, compassion, dignity and respect. POSITION SUMMARY This position performs procedures by following and verifying referring providers’ orders. Uses independent judgment and applies learned methodologies according to established policy and procedures for one Ultrasound certification. CORE FUNCTIONS 1. Performs all exams by following and verifying referring providers’ orders. Adheres to established protocols and provides all pertinent patient information utilized by Radiologist for complete dictation. Uses independent judgement and applies learned methodologies according to established policy and procedures for all ultrasound exams. Scanning competencies should include, at a minimum, all patient ages, acuity levels and classes, independently and without quality issues. Performs ultrasound guided procedures and works closely with radiologist or provider., 2. Educates patients and families about procedure and/or treatment to be performed. Demonstrates professional behavior and conduct in all interactions. Fosters teamwork, ensures efficient use of resources and advocates for quality patient outcomes., 3. Performs and evaluates equipment quality control measurements. Performs troubleshooting as needed and notifies appropriate personnel to maintain equipment performance. Maintains a safe environment for patients, personnel, and visitors. Adheres to safety policies. Ensures imaging areas and equipment are in a constant state of "Ready"., 4. Demonstrates competence in performing prescribed invasive/interventional procedures if applicable and in accordance with established policies. Maintains proficiency and competencies signed off for all studies related to certification(s). Performs high quality imaging and in accordance with training received., 5. Accountable for the ethical, legal, professional and certification responsibilities related to the practice. Maintains confidentiality of all work information., 6. Assures the efficient operation of workflow in the department through patient triage and prioritization. Monitors and maintains an adequate inventory of supplies and material to ensure uninterrupted services., 7. Internal customers: All levels of medical imaging and nursing management and staff, medical staff, and all other members of the interdisciplinary health care team. External Customers: regulatory and health agencies, patients, and family members. MINIMUM QUALIFICATIONS Requires national certification in one area of specialty from the American Registry of Diagnostic Medical Sonographers (ARDMS), Cardiovascular Credentialing International (CCI) or American Registry of Radiologic Technologists (ARRT). Uncertified new hires who are Registry eligible must obtain certification within 12 months of hire and image with an experienced technologist until they become fully proficient. BLS certification required. Successful completion of education and competencies via a clinical rotation with sign-off. Must also attain physics and body part exam. This position requires clinical knowledge typically achieved by 0-3 years of experience. Must demonstrate effective communication skills, human relations skills, ability to analyze data and solve problems. PREFERRED QUALIFICATIONS Additional related education and/or experience preferred. EEO Statement: EEO/Disabled/Veterans Our organization supports a drug-free work environment. Privacy Policy: Privacy Policy

Job Title: Oceanography Category / Component: Officer • Both Overview Oceanography (OCEANO) Officers, also called METOC, are the Navy's geophysical experts who understand and apply all facets of meteorology, oceanography, hydrography, bathymetry, geophysics, and precise time and astrometry. Their mission is to define and apply the physical environment, from the bottom of the ocean to the stars, to ensure the U.S. Navy has the freedom of action to deter aggression, maintain freedom of the seas, and win wars. Key Responsibilities Provide timely and relevant support to fleet and joint operations by leading the collection, processing, prediction, exploitation, and dissemination of environmental data. Ensure safety of navigation, access to denied waters, freedom to maneuver at will, and increase the lethality of Navy forces. Lead teams ranging from small 3-4 person deployable units to large commands of over 400 personnel. Serve as the one-of-one geophysical expert at an operational command. What to Expect Serve in a variety of challenging operational billets with increasing scope and responsibility, both at sea and ashore. The career path interweaves sea, shore, and educational tours. Sea duty may include leading small team detachments on U.S. and foreign vessels, serving as the embarked OCEANO Officer on an aircraft carrier or amphibious ship, or serving on a Strike Group or Joint Task Force staff. Shore tours include assignments at major production commands, forecast centers, headquarters, Joint commands, the Navy Data Center, and Naval Research Labs. Work Environment Assignments are worldwide, including Europe, Hawaii, Asia, and the Middle East. Work environments range from being at sea on surface combatants, survey vessels, aircraft carriers, and amphibious ships to being ashore at major production commands, forecast centers, headquarters, and research facilities. Pathways, Training & Advancement Initial training includes the 3-week Information Warfare Basic Course (IWBC) and the 7-week Basic Oceanography Accession Training (BOAT). Officers may also attend Division Officer Leadership Course (DIVOLC). Postgraduate education at the Naval Postgraduate School is required for officers at the LCDR level and senior, typically as mid-grade Lieutenants. Promotions to LTJG and LT occur at 2 and 4 years of service, with competitive promotion opportunities to LCDR, CDR, CAPT, and Flag Officer ranks. Requires a Baccalaureate degree, preferably in a technical field, with a cumulative GPA of 2.8 or greater. Must have completed a full college calculus series (I and II) with a minimum 'C' average, and a college-level calculus-based physics series (I and II) with a minimum 'B' average. A desired degree is in physics, physics-based oceanography, meteorology, hydrography, earth science, engineering, or mathematics. Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy as an Officer, including United States citizenship A bachelor's or qualifying professional degree Meeting age limits that vary by program and are set in law and Navy policy. Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores on the Officer Aptitude Rating exam Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter. Additional qualifications for this job may include: Must be qualified for sea duty, world-wide assignable, and eligible for a Top-Secret security clearance. Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities. Specific options depend on the Sailor's status, training, and current Navy policy. Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options. Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance. Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed. Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source. Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community. It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes. Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.