Trabajos paid training programming en Houston, TexasCrear alertas

Job Description Econolite® is an innovator of Intelligent Transportation System (ITS) solutions, products, and services. Our technology is helping save lives and making the Smart City a reality. If you want to be at the forefront of this intelligent technology revolution, we want to talk to you about being part of our team. Econolite is committed to employing the best talent that will make significant contributions to building a safer, connected world. Econolite’s ITS solutions ease traffic congestion, provide safer mobility, and improve quality of life. As the one-stop-shop leader for traffic management systems, sensor products, and services, Econolite is committed to the advancement of connected and autonomous vehicles, smart cities, and cybersecurity. Under general direction, lead and support the ITS performing skilled work in the installation, troubleshooting and maintenance of traffic signals and other Intelligent Transportation System (ITS) devices. DUTIES • Installation, maintenance, replacement, programming, repair and troubleshooting of ITS equipment, including CCTV cameras, video detection, radar detection, loop detectors, dynamic message signs, connected vehicle RSU’s, poles, etc. and associated cabinets, cabling, etc. Also to include communications equipment such as managed field ethernet switches, fiber, copper, etc., • Field implementation of traffic control devices as needed (signs, cones, etc.), • Includes driving / operation of a bucket truck for traffic signal and ITS maintenance duties, • Perform all job functions of ITS Technician and any other assignments as requested, • May require on-call on-site response for customer call outs, including nights and weekends, • May include travel within Florida and / or within the US, • Serves as a proactive customer service & quality ambassador of The Econolite Group, Inc. by representing the organization in a positive, professional manner to support The Brand Promise, • Five (5) years of related experience, • IMSA Level II or IMSA Level III certification preferred; FDOT Temporary Traffic Control Certification preferred; Electrician License preferred., • Knowledge of Occupational Safety and Health Administration (OSHA) regulations, • Knowledge of tools, equipment, practices, and methods used in installing, maintaining, and repairing traffic signals, ITS devices and associated equipment, • Knowledge of fiber optic cable & networking equipment, Fiber training preferred, • Ability to interpret design schematics, site plans, maps, and engineering drawings, • Must have a valid Driver’s License and an acceptable DMV record; commercial driver’s license preferred, • Ability to exert moderate physical effort, typically involving, some combination of climbing and balancing, stooping, kneeling, crouching, and which may involve some lifting, carrying, pushing and/or pulling of objects and materials of moderate weight (up to 50 pounds.), • 100% travel to project locations and company facilities across the various counties within the Tampa, FL area., • Must be able to stand, walk, squat, and bend at the waist for extended periods of time, • Safety sensitive position—will be required to work at busy traffic intersections, • Required to drive up to five hours a day; ability to lift and carry up to 40 pounds All candidates who accept employment will be subject to a background investigation and drug screening. For applicable roles, candidates who accept employment will also be subject to a Motor Vehicle/Driving Record screening. BENEFITS This role is eligible for benefits: weekly pay, weekly PTO accrual, paid holidays. Various medical plans, dental, vision, flexible spending accounts, direct deposit. Basic life, LTD, 401k discretionary match. Other voluntary benefits include: identity theft protection. DISCLAIMER The above statements are intended to indicate the general nature and level of work performed by employees within this classification. They are not designed to contain or be interpreted as an exhaustive list of all duties, responsibilities, skills, and qualifications required of employees assigned to this job. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities and veterans to apply to all of our job openings. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, marital status, lactation, ancestry/national origin, citizenship, age, disability, arrest and court records, military & veteran's status, Genetic Information & Testing, Family & Medical Leave, or any other classification protected by state or federal law. We prohibit Retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination. An Equal Opportunity Employer - Non-Smoking Facility

Join Our Mission to Build Healthier Communities! Position: Board Certified Behavior Analyst Organization: MyCHN – A nonprofit healthcare leader with 100+ providers and 15+ locations in the Greater Houston and Gulf Coast area What You’ll Do: • Conduct assessments and develop individualized ABA treatment plans, • Supervise and mentor Behavior Technicians (BTs) and Registered Behavior Technicians (RBTs), • Train parents, teachers, and professionals on behavior support strategies, • Lead functional behavior assessments and implement evidence-based interventions, • Monitor data collection and adjust programming based on analysis, • Ensure compliance with documentation standards and maintain communication with families and agencies, • Stay current with research and maintain BCBA certification through continuing education What You’ll Need: • BCBA Certification, • Master's degree in Special Education, Psychology, or a related human services field, • Texas licensure as a Behavior Analyst, • Experience working with Children with autism in home or center-based settings, • Strong leadership, communication, and organization skills, • Proficiency in ABA methodologies including DTT and natural environment training, • Reliable transportation and flexible availability Why You’ll Love Working With Us: • 100% Paid Employee Health & Dental Insurance, • 401(k) with 4% Match, • Paid Time Off + Birthday Leave + Sick Time, • $1500 Annual CE Stipend, • Career Growth & Flexible Schedules, • Make a Real Impact in Underserved Communities Location: MyCHN Silverlake 9430 Broadway St, Pearland, TX 77584, USA If you're ready to take the next step in your career and make a meaningful impact, apply now!

Intero Integrity is a fast-growing global company offering inspection, industrial and environmental services to the energy industry. We develop our own high-tech equipment and software and use this technology to execute projects worldwide. We support the energy industry to use natural resources efficiently, safely, and responsibly. Together we get the job done and contribute to a safer and more sustainable world. Position Summary To support our Americans Region Ultrasonic (UT) Data Analysis growth, we are adding a newly created UT Data Analysis Manager position located in our Region. This role is pivotal to ensure our data analysis contributes effectively to the success of projects by ensuring timely delivery, maintaining high standards, fostering collaboration, and ensuring regulatory compliance. Are you ready to build and lead a talented team and make a significant impact on overall global business success? We are looking for an experienced, passionate, and skilled leader to join our team in Mexico City, Mexico. Leadership • Manage, coach, and inspire the UT data analysis team for the Americas region, fostering a collaborative and high-performing team., • Drive the growth & development of the team through Intero’s Talent Management Plan -- regular check-ins, annual performance evaluations, goal setting, and providing continuous development., • Conduct workforce planning to address short and long term capacity for the region to the DA UT Management team. Customer Orientation • Be the go-to expert for customers, handling communications via in-person meetings, phone calls, emails, and video conferences., • Stay updated on American regulatory frameworks (DOT, PHMSA, etc.) to continuously develop customer profiles., • Collaborate and support the UT DA pre-sales and after-sales teams, in the acceptance of scope of work from tenders, and the resolution of investigation from customer inquiries, respectively. Cross-Functional Collaboration • Work closely with Sales, Operations, and Integrity Engineering departments to ensure data analysis is integral to project success., • Partner with integrity engineers for advanced analysis reporting, including fitness for service (FFS) and corrosion growth assessments (CGA). Project Management & Presentations • Coordinate project priorities and deadlines to ensure quality and timely delivery of reports., • Support Project Managers with final report presentations and ensure data analysis contributes to project milestones. Quality Assurance • Oversee the quality control and approval of all reports, ensuring accuracy and reliability., • Provide quality control for non-standard and complex data analysis cases. Data Analysis Excellence • Perform and support data analysis for tool specification validation., • Assist in data analysis-related activities. Standards and Procedures • Contribute to the alignment and establishment of Data Analysis QA standards with the Data Analysis management team. Training and Development • Assist in developing and maintaining training materials to meet industry standards (API 1163 and ANSI/ASNT ILI-PQ-2023). Required Skills • Superior collaborative communication skills to effectively deliver technical messages to a variety of stakeholders, • Above average presentation skills to effectively create technical content in support of storytelling to engage audiences, • Expertise in American Regulatory framework (DOT, PHMSA) is required, • Strong understanding of industry codes and standards, • Deep understanding of compression wave UT Data life cycle, • Strong and extensive track record in the analysis of UT compression wave data and geometry (GEO) for pipelines, • Experience in the analysis of UT compression wave data and geometry (GEO) for Heaters/Furnaces is a plus, • Understanding of ILI tool specifications in the market, • Deep understanding correlating analysis results to inspection data from previous inspections, other technologies, and verification digs, • Self-driven capacity to produce quality work with minimal supervision, • Above average skills in Microsoft Word, Excel, and PowerPoint, • Strong analytical and interpretive skills required, • 10+ years data analysis experience with compression wave UT technology, • 5+ years of experience in management/supervisory roles with strong track record of developing technical teams, • Experience in data management role Education & Certifications • ANSI/ASNT ILI-PQ-2023 Level 3 UT/GEO, Data Analysis certification is necessary., • ANSI/ASNT ILI-PQ-2023 Level 2 / Level 3 Mapping, Data Analysis certification is preferred., • Academic background with proven proficiency in basic physics and mathematics is needed., • Bachelor’s degree in engineering preferred, other bachelor’s degrees will be considered or requisite related technical experience., • Master’s degree in exact sciences is a plus. Additional Skills • Ability to travel as needed for customer meetings, • Experience in analysis of inertial mapping (IMU) pipeline inspections is a plus, • Previous experience leading and collaborating across a global organization, • Proficiency in programming, and/or database administration is a plus, • Above average, professional-level, English communication skills (written & verbal) is required, • Proficiency in Spanish and Portuguese (Brazil) is a plus, • Quality improvement experience or Six Sigma certification is a plus We Offer • A professional and challenging work environment in a growth business., • Competitive wages and a bonus system based on company & individual performance., • Engaging company culture that encourages teamwork and rewards both team and individual achievements., • Competitive benefits package and paid time off (PTO)., • Opportunities for career advancement based on performance, qualifications, leadership, and collaboration skills.

Job DescriptionSalary: $1,000 each week + $2 per key commission HNS Recovery is an equal opportunity employer seeking driven and experienced professionals to join us in a fast-paced, casual, and fun environment as we expand throughout Texas. The company supports numerous top-tier lenders and financial institutions with collateral recovery. As an Automotive Locksmith Technician on our team, You: • Are at least 25 years of age, • Have a high-school diploma or equivalent, • Have a minimum of 2 years experience Locksmithing, • Are punctual and responsible, • Are detail-oriented and a team player, • Are motivated and can work without constant supervision, • Are organized and driven to meet deadlines, • Have a valid Texas Drivers license without a suspension in the last two years, • Have reliable transportation, • Have a clean background, • Can pass pre-employment screening and unannounced drug screening throughout your employment, • Can thrive in a multi-cultural and multi-generational environment You should: • Have knowledge of automotive electrical systems, key duplication and transponder programming, • Have ignition removal experience, • Have 1 -2 years lishing experience, • Have all keys lost experience, • Have basic computer experience and typing skills, • Have a smartphone with a good quality camera, • Be an excellent communicator (verbal and written), • Be comfortable using various technologies (phones, tablets, computers, cameras etc.) The Job: • Maintain all Customer and Company policies and procedures required to meet compliance, • Maintain equipment and inventory within an assigned company vehicle, • Accurately submit photos, invoices, and work orders into an invoicing system on a timely basis, • Using Lishis to decode locks, • Cut and program new vehicle keys The Pay: (Hourly Rate depends on experience) • $1,000 each week + $2.00 per key commission (151+ keys cut monthly= $3.00 per key) The Benes: (Begin after 90 days of employment unless otherwise noted.) • 5 days paid Vacation (after 1 year of employment), • 5 days paid Sick leave, • 11 paid Holidays, • 3 days of paid Bereavement leave, • Medical/Dental/Vision, • 401K + 10% Company Match (after 1 year of employment), • CARS Certification, • Job training and advancement opportunities Apply now to join an amazing team in a very fast-paced, challenging industry with a trend setting company. Begin your new tomorrow, TODAY!

Job Description Do you want to grow with us? At DXP we are passionate about what we do and driven to be the best solution for our industrial customers. Since 1908 DXP has been dedicated to the highest quality of customer service through our expertise of the products we distribute and the technical services we perform with a sense of individual pride and company spirit. Throughout your career with DXP, we will encourage and empower you to take an active role in identifying and driving your development, so you feel total confidence in your ability to achieve ongoing success. We aspire to be the best solution for the Industrial customers' needs for MROP products and services through our Innovative Pumping Solutions, Metal Working, Supply Chain Services and Service Centers. Check out our many videos to learn more! Summary: The Machine Shop Programmer will be creating 2, 3, and 5 axis Esprit programs from SolidWorks models and modifying posts for Mazak machines. Responsibilities include collaborating with engineering and manufacturing to optimize processes, assisting CNC operators with setups, documenting tooling, and creating macro programs for part inspection while staying updated on cutting technology. Currently seeking a Machine Shop Programmer to join our Hobby Airport location Responsibilities of the Machine Shop Programmer include, but are not limited to: • Create efficient, accurate, run ready 2, 3 & 5 axis Esprit programs from SolidWorks models, • Modify Esprit Posts for Mazak Machines, • Milling - 3 Axis - HCN 6800 - Pallet changer with B axis, • Turning - 2 axis - STN 500M with live tooling, • Turning - 2 axis - QTN 350MY with live tooling, • Work closely with engineering, manufacturing and QC to streamline product line process, • Assist CNC operators with machine setups, • Create tooling and setup documentation for each CNC program, • Create macro programs for probe inspection of each part, • Work with tooling vendors to stay current with tool cutting technology #LI-JA1 #zrja Qualifications of the Machine Shop Programmer include, but are not limited to: • 5+ years of machine shop experience, • 5+ years of CNC EIA programming, • 5+ years programming with Esprit Version 2012 or greater, • CMM experience/programming is a plus, • Must be a team player that is able to work in a fast pace multitasking environment Physical Demand: Must be able to lift up to 50lbs unassisted. Working Conditions: Warehouse Environment Training/Certifications: N/A Shift Time/Overtime: Standard Business Hours Travel: N/A Education: GED or HS Diploma Location: USA:TX:Houston DXP is always looking for individuals who want to join a team of employees who have the desire to achieve remarkable accomplishments together. The culture of the organization is supportive and goal oriented with high expectations, yet it is an environment where the team spirit inspires everyone to do their best. All DXP employees play a vital part in the organization and are treated with respect. By applying to DXP, you will have the opportunity to speak with some of the most respected professionals in the industry. DXP offers a comprehensive benefits package for full-time regular employees, normally working a minimum of 30 hours per week including: Medical, Dental, Vision, Flexible Spending, 401(k), paid holidays, Life and Disability Insurance, and additional supplemental products. All part-time and temporary employees are eligible for 401(k). Minimum Required Salary and benefits commensurate with experience. We are an equal opportunity employer. Except where prohibited by state law, all offers of employment are conditioned upon successfully passing a drug test. This employer uses E-Verify. EOE/M/F/D/V

Job DescriptionCompany Description Location: 4001 Fair Dr., Pasadena, TX 77507 Walk-ins welcome! Meet our hiring team, tour the facility, and interview onsite. Eligibility: To attend, you must have CNC Machinist experience or formal training. John Crane, a business of Smiths Group, is a global leader in mission-critical flow control solutions for energy and process industries that enable efficient and sustainable operations. Our products include mechanical seals and systems, couplings, bearings, filtration systems, and predictive digital monitoring technologies. We have a global network of more than 200 sites in over 50 countries and employ more than 6,000 people worldwide. We partner with our customers to help them keep their operations safe, reduce downtime, improve efficiency, and meet the latest environmental standards. John Crane is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, helping to create a safer, more efficient, productive, and better-connected world across four global markets: energy, security & defense, space & aerospace, and general industrial. Listed on the London Stock Exchange, Smiths employs approximately 16,000 colleagues in over 50 countries. Job Description Sets up, writes programs and edits existing programs, and operates numerically controlled machinery. These include but are not limited to lathes, mills, drills, and other machinery as required. • Maintains quality and tolerances within .0003”., • Follow written and verbal procedures for machining and other duties., • Work from work order routings, prints, sketches, layout sheets, written and verbal instructions., • Working knowledge of programming languages and the ability to learn / adapt per machine., • Must be able to recognize and understand functions of machine parameters with the ability to modify as required per supervisor’s instructions., • Utilize knowledge of working properties for a variety of materials such as stainless steel, alloy steel, cast iron, brass, exotics, etc., • Presets tools and may be required to re-sharpen., • Inspect work produced using micrometer; bore gage, venire calipers, or other measuring instruments to verify conformance to specifications., • Follow preventative maintenance procedures on equipment as prescribed by supervisor and report operating difficulties of equipment to supervisor., • Perform duties in accordance with company safety policies, reports unsafe conditions to supervisor., • Make proper labor and time reports., • Perform other duties as required., • Keep machine(s) / work area clean and orderly., • Perform additional duties and responsibilities based upon individual branch requirements., • Additional duties as assigned.Qualifications, • High school diploma or equivalent with a technical school education and working machinist knowledge or equivalent., • CNC machine tool Programming & Operating experience preferred., • 2 years of Integrex experience is highly preferred., • Numerical control machining skills experience and ability to read and interpret work related machine drawings., • Make average to complicated mathematical calculations and resolve elementary technical problems., • CNC Programmer/Operator will be compensated in accordance with defined expertise, experience and production efficiency., • Can operate a minimum of 2 CNC machine tools., • Possesses previous experience as a Manual machinist., • Must be detail oriented; be able to work independently using sound judgment., • Good verbal, written, problem solving and organization skills required., • Capable of handling multiple priorities., • 2nd Shift: Monday–Friday, 4:30 PM – 3:30 AM, • Weekend Shift: Friday–Sunday, 6:00 AM – 6:00 PM (36 hrs paid as 40) lunch included Additional Information With colleagues stretching across the globe, we are proud of our diversity. To foster inclusivity, we run employee resource groups (ERGs) to provide a safe space for employees to connect and support each other. Our cross-business ERGs include Veterans, Pride Network, Black Employee Network, Women@Work Network, and Neurodiversity. Across our company, we recognize excellence, culminating in the Smiths Excellence Awards, our annual celebration of the most extraordinary activities, people, and projects that best showcase our strengths and help drive our business forward. We announce these on our annual Smiths Day, a global celebration of Smiths around our network. Join us for a great career with competitive compensation and benefits, while helping engineer a better future. We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Job Description Petrotech, Inc. is currently looking for Mid to Senior Level Field Engineers. This role is responsible for traveling to customer sites to manage the commissioning of Petrotech Turbomachinery Control Systems, overseeing on-site activities, troubleshooting technical issues with the machinery, ensuring proper operation of control systems, and providing exceptional customer service, all while maintaining detailed documentation and communicating effectively with both customer personnel and internal Petrotech teams. Essential Duties: · Travel to customer sites and manage activities related to the installation, pre-commission, and commissioning of Petrotech equipment. · Control system logic expertise to troubleshoot units in the field and/or ensure that the control system is set up for proper operation of Petrotech equipment. · Technical expertise in complex failure modes on rotating equipment for either mechanical, electrical, or process-related failure modes. · Preparation of project documentation including Factory and Site Acceptance Test (FAT/SAT) Protocols, Operations Manuals, and Functional Design Specifications. · Perform FATs/SATs to demonstrate to the customer the hardware and software compliance to the control system drawings/specifications. · Development and Implementation of customer training programs. · Interface effectively with other engineering functions, project management, procurement, sales/proposals, panel shop, and field personnel. · Participate in project meetings and represent Petrotech in technical discussions with customers and vendors. · Loop checks and startup assistance. · Conduct work in accordance with Health, Safety, Environmental and Quality systems. Successful Candidate: • Experience with PLC programming., • Previous experience with Rockwell, Allen Bradley, or Siemens control systems., • Knowledge of rotating equipment/mechanical experience required., • Knowledge of process control equipment, cause-and-effect diagrams, and reading P&ID drawings to troubleshoot issues in the field., • Previous experience with international travel and field service trips., • Excellent people skills with the ability to communicate and act professionally., • Self-directed with the ability to work independently and have a high level of self-confidence., • Ability to train and mentor junior FSEs. · 4-year college degree in Engineering or a technical field with 6+ years of field experience in industrial automation control systems. · 2-year technical degree in a related field with 8 years of field experience in industrial automation control systems. · Minimum 10 years experience with non-degree. · Knowledge of rotating equipment/mechanical experience required. · Experience with PLC and control logic. · Up to 75% travel is required. Job Type: Full-time Pay: From $75,000.00 per year Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Retirement plan, • Vision insurance Schedule: • 8 hour shift, • Monday to Friday Work Location: In person

Job Description About the Role: We are seeking a highly skilled CNC Lathe Machinist to join our team at RVO MANUFACTURING LLC. As a CNC Lathe Machinist, you will be responsible for setting up and operating CNC lathes to produce high-quality precision parts. Your attention to detail and ability to interpret technical drawings will be essential in ensuring that all parts meet the required specifications. You will work closely with our engineering team to troubleshoot any issues that arise during the production process, and you will be responsible for maintaining the machines to ensure optimal performance. Minimum Qualifications: • High school diploma or equivalent, • Experience with Mazak CNC lathe, • Experience with programming CNC lathes, • Set up and operate CNC lathes to produce precision parts according to technical drawings and specifications, • Perform quality checks on finished parts to ensure they meet required specifications, • Troubleshoot any issues that arise during the production process, • Maintain machines to ensure optimal performance, • Collaborate with engineering team to continuously improve production processes, • Responsible for Process Control related to the Machine assigned to by the Machine Shop Supervisor., • Responsible for the in-process inspection, handling, and inventory control of equipment flowing through the assigned machine., • Responsible for receiving material, engineering print, set-up, programming, and production of machine., • Responsible for hitting target efficiencies established by the Machine Shop Supervisor and Manufacturing Manager., • Responsible for assisting and training other employees when asked by Supervisor., • Promote a team environment within the department. Cooperate and assists all departments in resolving issues as related to jobs. As a CNC Lathe Machinist (Mazak Lathe), you will use your technical skills and attention to detail to produce high-quality precision parts, CNC Programming, set up Lathe. You will also use your problem-solving skills to troubleshoot any issues that arise during the production process. Your ability to work independently and as part of a team will be essential in ensuring that production goals are met. Additionally, your experience with programming will be beneficial in optimizing production processes. Finally, your knowledge of Lean Manufacturing principles will help us continuously improve our processes and increase efficiency. You have ability to read an engineering print, Set-Up and Program CNC Machine Tools, perform advanced mathematical computations, apply concepts such as fractions, percentages, ratios and proportions to practical situations, use proper measuring tools to perform quality inspections, move or transfer products with an overhead crane. You have Ability to lift 50 lbs. when required. While performing the duties of the job, the employee is regularly required to stand, walk and reach with hands and arms. Specific vision abilities required by this job include close vision, distance vision, colour vision, depth perception, and ability to adjust focus. Good communication skills to effectively communicate and understand job instructions both verbally and written. Ability to effectively interpret and translate instructions to other employees in a professional and respectful manner. Benefits: Dental insurance Health insurance, 401 k Paid time off Parental leave Vision insurance • Day Shift (Preferred) 10-12 hour shift Weekends as needed

Job Description Shape the future of industrial automation at a world-class Center of Excellence! Were seeking a Senior Automation Engineer to lead the design, development, and integration of advanced robotic systems for a global leader in analytical testing services. This is a high-impact role where you'll drive innovation, optimize performance, and implement cutting-edge automation technologies across a growing $800M+ division with 40+ business units. If you're passionate about robotics, thrive in multidisciplinary teams, and want to build and lead your own team in the near future, this is your opportunity. Key Responsibilities Robotic System Design & Optimization * Architect and enhance robotic automation systems across mechanical, electrical, and software domains. * Drive improvements in speed, precision, scalability, and cost-efficiency. Programming & Control Systems * Develop, test, and maintain control algorithms for robotic motion and task automation. * Code in C++, Python, and other languages for customized automation use cases. * Utilize ROS (Robot Operating System) for robotic frameworks. System Integration & Connectivity * Integrate automation into laboratory/industrial environments with LIMS and other platforms. * Design communication interfaces for seamless equipment interoperability. * Troubleshoot integration and performance challenges. User Interface (UI) Development * Create intuitive UIs to simplify robot control and real-time system interaction. Testing, Validation & Compliance * Conduct thorough system testing for performance, reliability, and safety. * Ensure compliance with safety protocols and regulatory requirements. * Analyze performance data and refine designs as needed. Documentation & Support * Maintain detailed system documentation, user guides, and technical manuals. * Support operational teams with training, troubleshooting, and ongoing updates. Required Qualifications * Bachelors degree in Robotics, Mechanical Engineering, Electrical Engineering, Computer Science, or a related field. * 10+ years of automation/robotics experience, including leadership of full-cycle project delivery. * Expert knowledge of robotics principles, control theory, and kinematics. Technical Expertise * Proficient in C++, Python, and familiar with Robot Operating System (ROS). * Experience with PLC and SCADA programming is a strong advantage. * Proficient in CAD design, control systems, and hardware/software integration. * Strong analytical, problem-solving, and communication skills. * Adaptable to fast-paced environments with evolving priorities. Why This is a Great Opportunity * Build Your Own Team: Once established, youll grow and lead a team of 35 engineers. * Strategic Impact: Drive automation innovation across a high-growth $800M division. * Comprehensive Support: Relocation assistance, bonus eligibility, and career growth opportunities. * Innovation at Scale: Work at the forefront of robotics and automation in commercial labs. Life in Houston, TX Houston is a vibrant city known for its thriving energy sector, space and medical research institutions, and diverse culture. Enjoy no state income tax, a low cost of living, top-tier dining, and easy access to Gulf Coast recreation. A great place to live and grow both professionally and personally. Compensation & Benefits * Base salary: $140,000 $170,000 + performance bonus * Relocation assistance available * Comprehensive medical, dental, vision, and life insurance * 401(k) with generous company match * Paid vacation, holidays, and personal time off * Dynamic, innovative culture that values growth and collaboration Apply Now Join a global leader that invests in innovation and people. If youre ready to take your automation career to the next level, apply today and lead the charge in robotic system transformation. Relevant Keyword Cloud Senior Automation Engineer, Robotics Engineer, Industrial Automation, Robotic Systems, PLC, SCADA, C++, Python, ROS, Mechatronics, Control Systems, Houston Engineering Jobs, Laboratory Automation, Automation Architect, Center of Excellence, Engineering Jobs in Texas

As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet. Join our winning team and pave the way for a bright future. With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing. Join the Johnson Controls family and thrive in a culture that values your voice and ideas. Your next incredible opportunity is just a few clicks away! Here's what we have to offer: • Competitive pay., • Paid vacation, holidays, and sick time - 10 days of vacation for the first year (plus sick time)., • Comprehensive benefits package, including 401K, medical, dental, and vision care - available from day one., • Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources., • Encouraging and collaborative team environment., • Dedication to safety through our Zero Harm policy., • Scheduling and management support., • JCI Employee discount programs (The Loop by Perk Spot). What you will do Asthe leader in the fire protection and security industry, we've been keeping buildings safe for decades. But we're always looking for ways to do more. And as we look to make our systems and technologies even smarter and more connected, it's vital that we have talented Installation and Service Technicians on hand to make sure our solutions are always at their best. This is your opportunity to contribute to the world around you, to add real value to our customers, and to help us deliver solutions that will have a lasting impact. Our extensive training program includes on the job training online courses and instructor led certification courses by manufacturer. How you will do it • This skilled position involves troubling shooting and repairing installed systems. Including panel repair/reprogram, device replacement/repair, resolving low voltage circuit troubles and system testing., • Organize and effectively utilize technical resources, information, material, and support to assure efficient execution of all assigned tasks., • Candidate must possess excellent written/verbal communication and outstanding customer service skills., • Position involves the programming of fire alarm, security, and access control system panels., • Complete and submit all required task-related, activity, productivity, and other documentation in a timely manner., • CCNA, A+ and Network+ certifications a plus., • On-call and after-hours work required on occasion at customer need. What we look for Required • High school diploma or equivalent required., • 4+ years’ experience with fire alarm, access control, security intrusion, sound, and communications systems., • Fire Alarm License., • Programming experience., • Must be able to interpret blueprints, diagrams, and specifications., • A good working knowledge of computers is necessary., • Ability to follow verbal and written instructions., • Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs. Able to work in unusual and sometimes difficult position such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc., • Ability to work flexible hours including weekends to meet customer requirements., • Overnight travel may be required., • Demonstrate a high level of customer service., • Maintain truck inventory to ensure timely response to customer needs., • Ability to adhere to, implement, and always follow safety guidelines and procedures., • Strong organizational skills, positive attitude, and ability to learn quickly., • Possess a valid driver’s license and driving record that meets company requirements., • Retain any licenses that are required by National, State and Local codes. Preferred • Technical training preferred., • NICET II preferred or ability to acquire within the first year. HIRING HOURLY RANGE: $21.63 - $29.32 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, location, and alignment with market data.) This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at ___ HIRING HOURLY RANGE: $21.63 - $29.32 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, location, and alignment with market data.) This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at JCI employees are valued members of the Johnson Controls family. They are dedicated, skilled, and passionate individuals who contribute to the success and growth of our company. We prioritize creating a positive and inclusive work environment that fosters collaboration, innovation, and personal development. Our employees are encouraged to voice their ideas and opinions, knowing that they will be heard and valued. We believe in investing in our employees' well-being, providing competitive salaries, comprehensive benefits packages, and opportunities for career advancement. With a strong emphasis on safety and a commitment to sustainability, JCI employees play a crucial role in shaping a smarter, healthier, and more sustainable future for buildings and communities worldwide. #LI-Onsite #TechHiring

As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet. Join our winning team and pave the way for a bright future. With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Join the Johnson Controls family and thrive in a culture that values your voice and ideas. Your next incredible opportunity is just a few clicks away! Here's what we have to offer • Competitive pay and bonus plan., • Paid vacation, holidays, and sick time., • Comprehensive benefits package, including 401K, medical, dental, and vision care - available from day one., • Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources., • Encouraging and collaborative team environment., • Dedication to safety through our Zero Harm policy., • Company vehicle, tools, and equipment provided to complete all jobs., • Scheduling and management support., • JCI Employee discount programs (The Loop by Perk Spot). What you will do This skilled position involves installing field devices, programming, troubleshooting, configuring and commissioning Fire Alarm Systems at commercial customer sites. Position is mainly focused on programming fire alarm systems but will include field installation of devices as needed. How you will do it • Perform tasks and training as previously described., • Read and interpret blueprints, diagrams, submittals, specifications, software/systems programs, schematics, and operational/product manuals., • Knowledge of sequence of operations relating to the operation of Fire Alarm Systems and other systems interfaced with Fire Alarm Systems. What we look for Required • At least 5 years of documented experience in Fire Alarm Systems, • High School Diploma or equivalent required, • Experience in reading and interpreting blueprints, submittals, and operational/product manuals, • Experience with hand tools test equipment, multi-meter usage, digital analyzer and commissioning devices, • Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs., • Able to work in unusual and sometimes difficult position such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc., • Able to work flexible hours including weekends to meet customer requirements, • Overnight travel may be required, • Demonstrate a high level of customer service, • Ability to lead & work well with team members, • Ability to adhere to, implement, and always follow safety guidelines and procedures, • Strong organizational skills, positive attitude, and an ability to learn quickly, • Possess a valid driver’s license and driving record that meets company requirements, • Able to pass a pre-employment background and drug test, • Able to obtain and retain any licenses that are required by National, State and Local codes, • Basic understanding of Network concepts and architectures., • Extended knowledge of DOS and Windows, • Ability to multitask and prioritize in a short period of time Preferred • Two-year associate’s degree in electronics, network, computer science or related field, • Nicet Level II or the ability to obtain in the first year HIRING HOURLY RANGE: $27.40 - $34.61 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, location and alignment with market data.) This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at ___ JCI employees are valued members of the Johnson Controls family. They are dedicated, skilled, and passionate individuals who contribute to the success and growth of our company. We prioritize creating a positive and inclusive work environment that fosters collaboration, innovation, and personal development. Our employees are encouraged to voice their ideas and opinions, knowing that they will be heard and valued. We believe in investing in our employees' well-being, providing competitive salaries, comprehensive benefits packages, and opportunities for career advancement. With a strong emphasis on safety and a commitment to sustainability, JCI employees play a crucial role in shaping a smarter, healthier, and more sustainable future for buildings and communities worldwide. #LI-Onsite #TechHiring

As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet. Join our winning team and pave the way for a bright future. With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience focused on supporting their physical, financial, and emotional wellbeing. Join the Johnson Controls family and thrive in a culture that values your voice and ideas. Your next incredible opportunity is just a few clicks away! Here's what we have to offer • Competitive pay, • Paid vacation, holidays, and sick time, • Comprehensive benefits package, including 401K, medical, dental, and vision care - available from day one, • Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources, • Encouraging and collaborative team environment, • Dedication to safety through our Zero Harm policy, • JCI Employee discount programs (The Loop by Perk Spot) What you will do • Work Shift: 7:00 to 4:00 with one hour lunch. Dependent on job/customer schedule, • Performs assigned system commissioning using Johnson Controls configuration and commissioning tools., • Troubleshoots and resolves electrical and control problems., • Responds to basic warranty calls. How you will do it • Loads system-level controller software. Performs commissioning/sequence verification on system level controllers to end devices (i.e., sensors, actuators, etc.) and completes all required commissioning documentation., • Keeps management and JCI contractor or customer informed of job progress and issues., • Calibrates system components using electronic test equipment., • Completes administrative tasks, including but not limited to time sheets, expense reports, and on-site documentation., • Documents change and provide information for as built documentation., • Communicates with the JCI contractor or customer upon arrival and before leaving the work site., • Follows all safety standards and attends required safety training. High degree of regard to employee and subcontractor safety. What we look for Required • Demonstrated technical aptitude., • Able to use hand and power tools (i.e., drills, saws, etc.), • Computer/BAS programming skills required., • Attention to detail., • Effective communication and listening skills., • Depending on location, the mounting and termination of low-voltage devices may have special licensing requirements., • Demonstrated knowledge of HVAC systems., • At least 5-7 years of prior BAS programming skills. HIRING HOURLY RANGE: $21.63 - $27.40 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, location, and alignment with market data.) This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at ___ HIRING HOURLY RANGE: $21.63 - $27.40 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, location, and alignment with market data.) This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at JCI employees are valued members of the Johnson Controls family. They are dedicated, skilled, and passionate individuals who contribute to the success and growth of our company. We prioritize creating a positive and inclusive work environment that fosters collaboration, innovation, and personal development. Our employees are encouraged to voice their ideas and opinions, knowing that they will be heard and valued. We believe in investing in our employees' well-being, providing competitive salaries, comprehensive benefits packages, and opportunities for career advancement. With a strong emphasis on safety and a commitment to sustainability, JCI employees play a crucial role in shaping a smarter, healthier, and more sustainable future for buildings and communities worldwide. #LI-Onsite #TechHiring

As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet. Join our winning team and pave the way for a bright future. With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing. Join the Johnson Controls family and thrive in a culture that values your voice and ideas. Your next incredible opportunity is just a few clicks away! Here's what we have to offer: • Competitive pay., • Paid vacation, holidays, and sick time -10 days of vacation for the first year (plus sick time)., • Comprehensive benefits package, including 401K, medical, dental, and vision care - available from day one., • Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources., • Encouraging and collaborative team environment., • Dedication to safety through our Zero Harm policy., • Company vehicle, tools, and equipment provided to complete all jobs., • Scheduling and management support., • JCI Employee discount programs (The Loop by Perk Spot). What you will do The purpose of this position is to troubleshoot and be a service expert working on alarm panels, CCTV systems, and Card access systems; all the while maintaining positive relations with the customer. How you will do it • Locate and alleviate trouble with damaged equipment or wiring., • Service, install, troubleshoot, repair, and perform maintenance and inspections on Tyco Integrated Fire & Security products., • Capable of working on customers' networks in conjunction with their IT personnel., • Testing and commissioning of systems., • Service, Installation, and programming of Access Control, CCTV, and Intrusion systems., • Training of end-users on TIFS systems., • Such other duties as may be assigned by the Supervisor/Manager. What we look for Required • Texas Private Security License, • Fire Alarm License or the ability to acquire in the first 6 months of hire., • Electronic Technician Certificate., • Valid driver’s license., • Security installation and/or service experience or equivalent., • Must be computer literate, have networking ability, and have a good knowledge of Computer operating systems., • Mechanical aptitude and be able to use hand and power tools., • Fluency in the English language, with strong written and verbal skills, is essential., • Telephone skills, excellent organizational skills, and the ability to work well under pressure., • The ability to meet deadlines and commitments and to adjust/adapt to new ideas and procedures is necessary., • Commitment to upgrading and continuing their education., • Flexibility with hours expected to work., • Criminal record checks and driver’s abstracts are required. Preferred • Computer Networking Courses., • NICET, • Genetec Certification, • Software House HIRING HOURLY RANGE: $24.52 - $31.25 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, location, and alignment with market data.) This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at ___ HIRING HOURLY RANGE: $24.52 - $31.25 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, location, and alignment with market data.) This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at JCI employees are valued members of the Johnson Controls family. They are dedicated, skilled, and passionate individuals who contribute to the success and growth of our company. We prioritize creating a positive and inclusive work environment that fosters collaboration, innovation, and personal development. Our employees are encouraged to voice their ideas and opinions, knowing that they will be heard and valued. We believe in investing in our employees' well-being, providing competitive salaries, comprehensive benefits packages, and opportunities for career advancement. With a strong emphasis on safety and a commitment to sustainability, JCI employees play a crucial role in shaping a smarter, healthier, and more sustainable future for buildings and communities worldwide. #LI-Onsite #TechHiring

Job Description Position Title: Director of Community Resilience Location: 11821 East Freeway, Suite 500, Houston, TX 77029 Employment Type: Full-time, Exempt Work Mode: In-Person Reports to: Community Impact Officer Salary Range: $70,000 - $80,000 annually Why This Job Matters East Harris County Empowerment Council (EHCEC) is committed to stabilizing families, building resilient communities, and advancing equity in East Harris County. The Director of Community Resilience plays a mission-critical role in designing, scaling, and sustaining impactful programs that prepare communities for disasters and connect residents to essential services like housing, food, health, and wellness. As the architect of the Community Resilience Program Center and Social Services Hub, this leader ensures EHCEC’s ability to respond to crises while proactively building systems that enable long-term community stability. You’ll lead the team that ensures residents don’t just survive—but thrive—before, during, and after a crisis. What You’ll Be Responsible For Launch a High-Performing Program Team • Hire and onboard all core team members within the first 90 days., • Implement weekly team meetings, establish individual performance scorecards, and launch 30/60/90-day plans for 100% of team members within 60 days., • Fully operationalize a 5-day/week Social Services Hub offering direct walk-in and scheduled support., • Serve a minimum of 2,500 unduplicated residents annually., • Oversee 12 monthly food distributions in collaboration with regional food providers., • Facilitate rental and utility assistance for at least 75 households annually., • Provide strategic oversight to the Disaster Recovery Coach and broader team to ensure delivery of 12 annual disaster preparedness trainings in high-risk neighborhoods., • Lead the development and approval of at least 2 Memorandums of Understanding (MOUs) with emergency response or relief partners to formalize collaboration and expand service reach., • Oversee the development and implementation of 2 or more behavioral health or healthcare navigation programs in partnership with internal team members and external providers., • Set program targets and evaluate progress toward referring at least 500 residents to healthcare, with a 75% follow-up completion rate, ensuring staff are equipped and supported to meet these goals., • Host 6 cross-sector partner convenings annually., • Recruit 25 active LINK partners committed to shared goals, standards, and referrals., • Increase the division’s operating budget by 30% through grants, contracts, and public/private partnerships., • Submit at least 4 competitive grant proposals aligned with strategic outcomes. ✅ Strategic program leaders passionate about community impact and systems change. ✅ Equity-driven professionals with experience in multi-service delivery and cross-sector partnerships. ✅ Resilient and adaptable thinkers who thrive in fast-paced, evolving environments. ✅ Leaders ready to coach teams, manage grants, and operationalize a vision. ✅ Collaborative change-makers who listen deeply, act with integrity, and center resident voice. Who This Job is NOT For ???? People who prefer to work in silos or without collaboration. ???? Those who avoid fast-paced or adaptive environments. ???? Leaders uncomfortable navigating ambiguity and building from scratch. ???? Individuals focused solely on direct service without systems thinking. ???? Anyone unwilling to be held accountable to measurable results. What You Bring ✅ Proven leadership in community resilience programming, with direct experience overseeing initiatives in disaster preparedness, housing stabilization, food security, or public health. ✅ A track record of building strong multi-sector collaborations—including with local governments, nonprofits, healthcare providers, and funders—to deliver coordinated, high-impact services. ✅ Demonstrated commitment to equity-driven strategies that center resident voice and improve access for historically underinvested communities. ✅ Advanced communication, facilitation, and public engagement skills—you know how to represent a mission externally while fostering trust internally. ✅ Strong data and performance management skills, including experience with outcome tracking, KPI dashboards, and using insights to drive program design and continuous improvement. ✅ Creative problem-solving and systems thinking abilities—you can align people, processes, and policies to build infrastructure that scales and sustains impact. ✅ Experience managing complex, multi-funded initiatives, including grants, contracts, and budgets, while meeting deliverables on tight timelines. ✅ The ability to lead, coach, and retain high-performing teams, setting clear expectations while supporting individual growth and accountability. What Success Looks Like - 30, 60 ,90 day First 30 Days – Learning & Orientation • Conduct a full program audit and submit a written summary identifying key gaps and immediate priorities., • Meet with 10+ external partners (food, housing, disaster, and health) to assess collaboration opportunities., • Draft and implement initial performance scorecards and weekly meeting structures for existing team members., • Complete hiring for 100% of core team roles and launch 30/60/90-day onboarding plans for each., • Launch the Social Services Hub with operations 5 days/week and services available on-site., • Oversee the first food distributions and schedule the first 3 disaster preparedness trainings., • Host the first LINK partner convening and confirm participation of at least 10 active partners., • Initiate 1 new behavioral health or healthcare navigation service, with referral tracking activated., • Finalize 2 new signed MOUs, one for emergency preparedness and one for health or food access. We know that great work comes from happy, supported employees. That’s why we offer: • Competitive Salary – We recognize and reward talent., • Comprehensive Benefits – 100% employer-sponsored medical, dental, and vision coverage., • Generous PTO – 30 days plus 6 health and wellness days of paid time off annually., • 401(k) Match – We match dollar-for-dollar up to 5%., • Employee Assistance Program (EAP) – Confidential support for mental health, financial counseling, and personal wellness., • Employee Snack Bar – Complimentary snacks and refreshments to keep you energized throughout the day., • Career Advancement Opportunities – Ongoing professional development, mentorship, and leadership training to support your growth., • True Team Atmosphere – A culture built on collaboration, inclusivity, and shared success. The staff person must be able to attend meetings on nights and weekends as needed. EHCEC is a collaborative work setting. Employees pitch in to help each other with responsibilities as needed. Team members will be expected to contribute to teamwork and a sense of collaboration. Disclaimer: This job description may not be inclusive of all assigned duties, responsibilities, or aspects of the job described, and may be amended at any time at the sole discretion of the employer. EHCEC provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job DescriptionAbout the Company Our client is a publicly traded company at the forefront of the AI revolution, offering an AI-centric cloud platform that's reshaping the landscape of artificial intelligence. The company provides cutting-edge infrastructure, including large-scale GPU clusters, cloud platforms, tools, and services for developers to service the explosive growth of the global AI industry for Fortune 1000 companies, top-tier innovative startups, and AI researchers. * Company type: Publicly traded * Industry: AI/ML, Cloud Computing, Infrastructure-as-Code * Candidate Location: Remote U.S. Their mission is to democratize access to AI infrastructure and empower organizations to create, optimize, and deploy AI solutions at any scale. They aim to simplify the complexities of AI development by providing a full-stack AI platform that combines powerful hardware with user-friendly tools and services. The Opportunity We are seeking a Senior AI/ML Specialist Solutions Architect to join our client's team. This role offers the chance to design and implement scalable AI solutions for AI-focused customers, working with state-of-the-art technologies and contributing to one of the most powerful commercially available supercomputers. What You'll Do * Architect and optimize distributed training and inference systems for large-scale AI models * Design and deliver customer-focused solutions that maximize performance and business value * Lead the transition of ML pipelines from POC to scalable production systems * Build long-term customer relationships, ensuring satisfaction and alignment with strategic goals * Create whitepapers, deliver technical presentations, and host webinars to share insights and best practices * Provide technical leadership and mentor teams on AI infrastructure and deployment strategies * Collaborate with engineering and product teams to prioritize customer feedback and influence product roadmaps What You Bring * 5+ years of experience with cloud technologies and infrastructure, ideally in senior MLOps or Solutions Architect roles * Proven expertise in scaling and optimizing AI workloads across multi-node and multi-GPU environments * Demonstrated success delivering ML products, scaling from POC to production * Deep knowledge of ML frameworks like PyTorch and JAX * Strong background in the NVIDIA HPC ecosystem (CUDA, NCCL, Infiniband) * Exceptional communication skills to engage both technical teams and business stakeholders * Legal authorization to work in the United States on a full-time basis without sponsorship Preferred Technical Skills * Programming Languages: Python, Go, Java, C++ * Infrastructure as Code (IaC): Terraform, Ansible * Orchestration: Kubernetes (K8s), Slurm * DevOps Tools: Git, Docker, Helm * Big Data Frameworks: Spark, Kafka, Hadoop * Databases: SQL, NoSQL, and vector databases * ML Frameworks: PyTorch, TensorFlow, JAX, HuggingFace, Scikit-learn Why Join? * Competitive compensation: $180,000 - $300,000 per year (negotiable based on experience and location) * Full medical benefits: 100% company-paid medical, dental, and vision coverage for employees and families * 401(k) plan with a 4% match program * Stock options plan * Flexible remote work environment * Company-paid short-term, long-term disability, and life insurance coverage * 20 weeks paid parental leave for primary caregivers, 12 weeks for secondary caregivers * Up to $85/month for mobile and internet * Work with state-of-the-art AI and cloud technologies, including the latest NVIDIA GPUs * Be part of a team that operates one of the most powerful commercially available supercomputers * Contribute to sustainable AI infrastructure, with energy-efficient data centers that recover waste heat to warm nearby residential buildings Interviewing Process * Level 1 - Interview with Talent Acquisition * Level 2 - Interview with the Hiring Manager * Level 3 - Technical Assessment * Reference and Background Checks: conducted after successful interviews * Job Offer: provided to the selected candidate We are proud to be an equal opportunity workplace and are committed to equal employment opportunity regardless of race, color, religion, national origin, age, sex, marital status, ancestry, physical or mental disability, genetic information, veteran status, gender identity, or expression, sexual orientation, or any other characteristic protected by applicable federal, state or local law. Compensation Range: $180K - $300K

Job Description Digi Security Systems is an industry leader in the design, installation and support of custom video surveillance, electronic access control, and intrusion detection solutions for companies of all sizes. We've built our reputation on innovation and reliable service, and we're known as the industry's experts. Position Overview We are seeking a Lead Technician to join our operations in the Houston, TX area. This person will be responsible for performing skilled security system installations and assisting with supervising others with access control and CCTV installation. This individual must have at least 3 years of direct experience in installing and servicing Access Control, CCTV, and Burglar and Fire Alarms in a commercial setting. Digi's hourly rates are structured based on skill set and experience - Lead Technicians (complete commercial install knowledge, assistant supervisors): $28+ /hour Project Leads (site supervisors with complete commercial install knowledge and some programming skills): $31+ /hour Main Responsibilities • Installation: Responsible for the professional installation of cabling, access control components, CCTV systems, and motion/intrusion/alarm systems. Lead by example by upholding the highest installation standards in the industry, and is expected to hold their team accountable to professional standards., • Hand Tools and Inventory: Safely operate various hand tools, work at heights on ladders and lifts, keep accurate truck inventory, and maintain safety standards on-site and off., • Documentation: Perform computer program entry as required and prepare documentation for the purpose of providing written support in compliance with regulations and/or conveying information., • Communication: Respectfully communicates with all coworkers and Project Lead on daily progress and documents all necessary information., • Work Planning: Responsible for reading and understanding technical drawings, assigned project documentation and work orders including scope of work., • 30 hours PTO plus 2 weeks vacation accrual rates, • 3 weeks vacation accrual rate after first year of employment, • 7 company-wide paid holidays throughout the year, • On-call and Travel pay bonuses, • 401k plan w/corporate matching structure, • Full health benefits-medical, dental and vision, • Included life insurance, additional available for purchase, • Accident/critical illness insurance available for purchase, • Full set of Hilti tools, • All hand tools and consumables paid for by company, • Ample paid training and professional development opportunities, • Company laptop, company phone, uniforms and gear, • Yearly stipend for steel-toed boots and work pants, • Ability to lift/move equipment and tools weighing up to 50 lbs., • Ability to work from ladders or man lifts at extended heights., • Must be able to differentiate colors., • Must be comfortable standing for long periods of time and complete overhead work for long periods of time. #LI-TW1

Job Description We want to bring on several experienced WIFI Network Installers to join our team. Our installation team travels throughout the US, installing new systems for hotels, resorts, casinos, student housing, etc. This position requires Travel within the United States. The company pays for all travel, including food per diems. Key Responsibilities for this role: • Implement wired and wireless network infrastructure for hospitality clients, • Install and configure wireless networks, • Perform network troubleshooting and diagnosis of wireless connectivity issues throughout the installation process, • Design and implement VLANs, subnets, and routing to support wireless infrastructure, • Configure firewalls and routers to secure wireless networks, • Configure managed switches (HP & Cisco specific experience preferred), • Install low-voltage cabling for wireless infrastructure, • Provide onsite support and training for hotel staff and management, • CCNA certification or equivalent level of knowledge is required, • Experience in installing and configuring wireless networks, • Experience in VLAN design and configuration, • Experience in subnetting and routing, • Experience in firewall and router configuration, • Experience in configuring managed switches, • Experience in low-voltage cable running, termination, testing, and management, • Strong communication skills and comfortable with client interaction, • Ability to work independently or as part of a team Additionally, experience with any of the following types of equipment would be ideal: Ruckus, HP ProCurve, Aruba, Brocade, Meraki, RG Nets, pfSense, or Cisco. We are headquartered in Clearwater, FL, but we have installers located throughout the US. If you are located near an airport for ease of travel, feel free to apply. We are a stable, well-established company in business for 20 years. We promote from within, offer many avenues of advancement, and provide continued education and training. We offer competitive pay and have an excellent benefits package, including: • Health Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Flex Spending Account, • Paid Vacations, • Paid Holidays, • 401KCompany DescriptionOur company was founded back in 2003. We have over 150,000 guestrooms that we support with WIFI and TV services. Our proprietary OTT / IPTV Casting TV System, best-of-breed WIFI equipment, propriety hospitably gateway and excellent installation & support services all greatly differentiate us from our competition.Our company was founded back in 2003. We have over 150,000 guestrooms that we support with WIFI and TV services. Our proprietary OTT / IPTV Casting TV System, best-of-breed WIFI equipment, propriety hospitably gateway and excellent installation & support services all greatly differentiate us from our competition.

Job Description North American Automation is looking for skilled controls engineers with a strong programming background to expand the electronic control systems team. Controls Engineers are responsible for developing, testing, and troubleshooting control and HMI software, predominantly for Red Lion devices. You’ll be developing for and supporting products at every step of the process: scoping, prototyping, development, testing, and deployment. There’s plenty to do – your only limitations will be your enthusiasm and desire to learn. Qualifications Programming experience is critical to this role, C strongly preferred unless the candidate can demonstrate sufficient proficiency in another language and the capacity to transfer that experience to a C-like codebase Highly skilled in communicating issues and working with a team to complete projects and implement corrective actions Direct experience with design and implementation of fault-tolerant PLC-based systems that incorporate error handling and recovery Proven ability to create novel and robust solutions to existing problems Proven ability to work accurately while under time pressure Working knowledge of industrial control networks, including but not limited to Ethernet/IP, Modbus, and Serial communication Working knowledge or willingness to learn HMI development with an emphasis on user experience Familiarity with cloud-based telemetry systems and interfaces, including MQTT-based telemetry, satcom, and/or IOT cellular systems Accredited Bachelor of Science Degree in Electrical Engineering, Computer Engineering, Software Engineering, Mechatronics Engineering, Computer Science, or equivalent experience Responsibilities and duties Work with a team to develop, implement, and test software for Red Lion control systems that control industrial equipment – predominantly electrohydraulic systems. Support deployment of new control systems as the system subject matter expert – to include troubleshooting, training of field personnel, and on-site support. Work with a team to identify, troubleshoot, and resolve equipment failures, bugs, and customer complaints in real time. Implement improvements to and solutions for existing systems that minimize code complexity and added risk Travel up to 20% is possible to support product deployment Job Type: Full-time Benefits: • Dental insurance, • Health insurance, • Life insurance, • Paid time off

Job DescriptionStructural Integrity Associates, Inc. (SIA) is currently looking for a Mechanical Engineering Consultant to join our Process Pressure Vessels team. This role would participate as part of a dynamic team in the engineering analysis, condition assessment, and life prediction of pressure vessels, piping, and auxiliary equipment used in upstream and downstream petroleum refining, petrochemical, and chemical industries. The position requires the individual to develop the skills to manage and coordinate the technical and administrative aspects of the work. They are expected to actively participate in both internal and external training, development programs, conferences, and trade shows. This position can be remote or based in one of SIA's offices. Responsibilities and Qualifications: Technical: • Perform evaluations related to design, life assessment, and root cause failure analysis of stationary equipment such as pressure vessels, piping, and storage tanks. Knowledge in the analysis of rotating equipment is a plus., • Perform thermal heat transfer and structural stress analysis of pressure vessels, piping systems, and other plant structures using both classic and finite element analysis methods. Knowledge in fluid mechanics is a plus., • Perform simple pressure vessel calculations using commercial software such as PV-Elite and/or Compress., • Perform calculations for fatigue, corrosion, and crack initiation and growth mechanisms and fracture mechanics concepts employed for serviceability assessment of damaged or flawed components., • Knowledge in materials, welding, and nondestructive examination techniques is preferred., • Assist with field inspections of plant equipment and development of risk-based inspection methods., • Mentor and train entry level engineers in stress analysis and life assessment techniques., • Mentor and train entry level engineers in application of various codes and standards including ASME & API, • Prepare and oversee the preparation of written technical reports and presentations., • Perform all work in accordance with SI’s Commercial Quality Procedures and with an acute awareness of client requests., • Develop and expand business opportunities with existing Structural Integrity clients and develop new clients., • Develop proposals for identified opportunities., • Support project managers in execution of large-scale projects., • Develop the skills to independently manage small-scale projects., • Ensure quality and enhance job skills by seeking peer review and appraisal., • B. S. or M.S. in Mechanical Engineering or similar discipline with 5-10 years or more industry related experience, • ASME Boiler and Pressure Vessel and Piping Code, specifically, Section VIII, Div. 1 through 3 and B31.3 Design & Analysis Experience is a plus., • Knowledge of SolidWorks CAD software, Abaqus FE software, and general fracture mechanics concepts. Piping stress analyses experience using CAESAR II is a plus., • Computer Programming experience is a plus., • Excellent written and oral communication skills are essential, as well as a working knowledge of computer software including Microsoft Office. About Us: SIA is an engineering consulting firm serving various industries including Nuclear Power, Energy Services, Pipeline Integrity, and Critical Infrastructure. Join a team of internationally recognized experts in a culture based on knowledge, excellence, and respect for one another. Our employees are members of a distinct community of internationally respected professionals committed to quality, engineering innovation and a shared goal of building a safer world Why Work at SIA? SIA offers a competitive salary and performance-based bonus program. Our retirement benefits include a Traditional 401k, Roth 401k, and an employer match. To help employees maintain a work-life balance, SIA also offers various paid time off including vacation, floating holidays, sick time, and parental leave. Our employees also enjoy a comprehensive benefits program that includes the following: • Medical, dental, and vision insurance, • Life Insurance and AD&D, • Short-term and long-term disability, • Health Savings Account with employer contribution, • Flexible Spending Account for health care and dependent care SIA does not welcome third-party recruiters, employment agencies, headhunters, etc. Please do not reach out to SIA employees requesting a call, sit down, meeting, or email response. Powered by JazzHR Ari0vO9Exp

Job Description Building Automation Programmer - Tridium & Distech Location: Houston, TX (Field & Remote Work) We're seeking an experienced BAS Programmer with deep expertise in Tridium Niagara and Distech Controls. In this role, you'll focus on programming, commissioning, and optimizing BAS devices, both onsite and remotely. You'll bring control sequences to life, integrate systems for peak efficiency, and ensure building environments operate exactly as designed. You'll be hands-on in the field for startups, troubleshooting, and commissioning, as well as working from a remote setup to fine-tune logic, graphics, and system performance. This role combines technical problem-solving, precise programming, and collaborative work with project teams and clients. Key Responsibilities * Program, configure, and commission Tridium Niagara and Distech BAS controllers and front-end software. * Create and optimize graphics, dashboards, and trends for user interfaces. * Integrate BAS with third-party systems (BACnet, Modbus, etc.). * Troubleshoot programming logic, device communications, and network integration issues. * Perform remote diagnostics and fine-tuning to ensure system performance meets project specifications. * Conduct onsite startup, functional testing, and commissioning of HVAC and control systems. * Collaborate with engineering teams to translate sequences of operation into effective control programs. * Maintain clear project documentation, backups, and version control of programs. * Support service teams in resolving complex controls issues in the field or remotely. * Ensure all work meets industry standards, project timelines, and customer expectations. Requirements * Proven experience programming BAS systems with Tridium Niagara and Distech Controls. * Strong understanding of HVAC sequences, control theory, and system integration protocols (BACnet/IP, MSTP, Modbus). * Ability to read and interpret control drawings, wiring diagrams, and sequences of operation. * Proficient in remote access and troubleshooting tools. * Field commissioning experience for new construction or retrofit projects. * Excellent problem-solving and communication skills. * Capable of independent work and time management in both field and remote environments. * Familiarity with other BAS platforms (Alerton, Siemens, JCI, Automated Logic, etc.) is a plus. Compensation & Benefits • Salary: $90,000 to $120,000 per year, depending on experience, certifications, and a successful interview Medical, Dental, and Vision insurance * 401(k) with company match * Paid Vacation, Sick Time, and Holidays Why Join Us? Joining our team means working with cutting-edge BAS technologies on high-profile projects while enjoying the flexibility of both field and remote programming work. You'll be part of a collaborative and highly skilled group that values innovation, technical excellence, and problem-solving. We offer competitive pay, comprehensive benefits, and ongoing opportunities for professional growth, including advanced training in Tridium Niagara and Distech systems. If you're looking to take your BAS programming expertise to the next level in an environment that supports your success, we'd love to have you on board.

Job DescriptionSalary: $28/hr.-$33/hr. The Field Service Associate is responsible for installing, maintaining, and troubleshooting automated machinery and equipment at greenhouse sites in the US and Canada. This is an entry-level field-based position with significant travel requirements and excellent opportunities for career growth. Who We Are AdeptAg LLC is a leader in the controlled environment agriculture industry as an integrator of growing solutions for our customers both domestic and international. AdeptAg is constantly helping to meet the challenges of todays growers with innovative and cost-efficient solutions. Why Work for Us Competitive Compensation Package, including Generous 401K (with Company Paid Contribution), Medical, Dental, Vision, Company Paid Life Insurance, Voluntary Life Insurance, Voluntary Accident Insurance and Disability Insurance. Responsibilities: • Install, maintain, and troubleshoot automated machinery and equipment in greenhouses and nurseries (including conveyors, hoppers, potting machines, transplanters), • Diagnose hardware and programming issues, and collaborate with appropriate teams to implement corrective actions, • Perform repairs, upgrades, and preventive maintenance on automation systems, • Provide technical support to clients, including onsite training on equipment operations, • Collaborate with engineering teams to identify areas for improvement and assist in the development of new automation solutions Promptly and accurately document all repairs, upgrades, and maintenance activities Minimum Qualifications (Knowledge, skills, and abilities required) • Associates degree in Electronics, Mechatronics, Automation, Engineering, or a related field; or equivalent work experience or trade certification., • 1-3 years of hands-on experience with electro-mechanical systems including installing, maintaining, and/or troubleshooting systems., • Basic understanding of electrical circuits (including VFDs, PLCs, photo-eyes, encoders) and mechanical systems (including pneumatic actuators, motors, gear boxes, chain drives)., • Proficiency in reading and interpreting technical drawings and schematics, • Excellent problem-solving and methodical troubleshooting skills Proactive communication with home office Remote Support staff. • Ability to clearly explain the root cause of an issue and the corrective action to the customer, • Effective time management skills and the ability to work unsupervised at customer locations, • Flexibility to travel up to 100% to different client sites and work flexible hours as needed. Travel is typically within the work week, but occasional weekend work/travel will be required based on customer requirements and project location. remote work

Job Description Job Description Controls Engineer - Houston, Texas - Hybrid Company Overview ENERGYneering Solutions (ESI), a TransTech Energy Company, provides exceptional technical expertise in engineering and operations for both the renewable and traditional energy industries. Since 2007, ESI has specialized in the design, construction, and operations of biogas projects, collectively producing over one million MWh of renewable electricity and more than 50 million gallons of renewable vehicle fuel annually. Headquartered in scenic Central Oregon, at the foot of the Cascade Mountain Range, ESI embraces the region's quality of life and encourages a healthy, active lifestyle for its employees, aligning with its core principle of unmatched experience, flexibility, and follow-through for its clients. Job Overview The Controls Engineer works closely with project engineers, project managers, and ESI’s O&M teams to provide industrial control system design for the company’s ongoing biogas utilization projects. The position requires implementing sound engineering principles to ensure project designs are at the industry’s cutting edge. An ability to work independently, self-motivate, and communicate effectively with team members is of the utmost importance to this position. Reports To The Controls Engineer reports to the Lead Controls Engineer as a member of the Instrumentation and Controls group. Location Hybrid Remote/Office based out of the Houston, TX Office Full remote option available for Senior Controls Engineers with at least 10+ year experience. Responsibilities and Duties • Design and review control system documentation including Process Flow Diagrams (PFDs), equipment and instrumentation specifications, data sheets, Piping and Instrumentation Diagrams (P&IDs), control narratives, I/O list, electrical drawings, and operation manuals., • Specify measurement and analysis instrumentation and control components for automated industrial process control and plant safety., • PLC programming and SCADA design., • Prepare and review UL panel drawings for fabrication., • Participate in project HAZOP studies., • Support the review and response to contractor RFIs., • Support Field Service work with through remote and on-site process troubleshooting and optimization., • Plan and participate in on-site startup and commissioning activities., • Interact with other engineering disciplines and departments throughout the company., • Seek ways to improve and promote quality, demonstrating accuracy and thoroughness in all work., • This is a mid-level position requiring 3+ years of control engineering-related experience in some of or all the following industries: Renewable Energy; RNG - Renewable Natural Gas and Biogas-to-Energy; Gas Processing; Chemical; Power; Waste Management; Environmental Air Quality Control System, Other Industrial Process Automation., • Bachelor’s degree in engineering or a similar technical field from an accredited university., • Working knowledge of ISA, NFPA, UL, safety codes, fire codes, and other industry standards., • Proficiency in process control instrumentation and common data communication protocols including Modbus & HART., • Proficiency in Studio 5000 PLC programming software., • Experience tuning control loops., • Proficient with the Microsoft Office suite of software. (Word, Excel, PowerPoint, etc.), • Excellent verbal and written communication skills., • Proficiency with Rockwell Automation, GE and Automation Direct products and ignition software., • Proficiency in SCADA design., • Proficiency in Gas Analysis., • Proficiency in UL panel design., • E.I.T. certification or ability to obtain certification within 6 months of hire., • Experience in maintenance planning and preventative maintenance strategies., • Advanced optimization, trouble shooting, and/or process design skills in a process simulation package., • Experience in process optimization, troubleshooting, and root cause analysis (RCA) in an energy or manufacturing environment., • Experience with process metrics and reporting key performance indicators (KPI). Ideal Candidate • Excellent verbal and written communication skills. Ability to deal with complex problems and present recommendations and findings in a clear, concise format; ability to interact effectively at all levels within and outside of ESI. Ability to communicate effectively with team members, vendors, contractors, and leadership., • Quick learner who adapts well to a fast-moving environment and gets things done, combines creativity, problem-solving skills, and a can-do attitude to overcome any obstacle., • Free HSA health plan or traditional PPO, • 401(k) with generous company match (Safe Harbor), • Dental, vision, and optional coverage like accident & critical illness insurance, • HSA and FSA accounts to save on healthcare costs, • Company-paid Life, Long Term Disability, and AD&D insurance, • Confidential support for mental health, family matters, legal concerns, and more through our Employee Assistance Program, • Discounts on gyms, shopping & entertainment, • Unlimited Paid Time Off, • Paid Holidays ESI’s core values include pride of ownership, a limitless desire to learn, and a relentless approach to solving any challenge. A successful ESI employee not only embraces these values but knows when to lean on the team for support and guidance. We acknowledge that our fast-paced and dynamic environment is not for everyone, but if you are looking for independence and new challenges, ESI will be a great fit. This organization provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. #ESI

Job DescriptionBenefits: • Competitive salary, • Health insurance, • Opportunity for advancement Primary Responsibilities: • Is responsible for the overall supervision and daily class functions of a group of children., • Observes all rules and regulations at Primrose School of Kingwood and the local, state or national regulatory agencies pertaining to the health, safety and care of children., • Assesses each child's developmental needs on an ongoing basis., • Implements the approved lesson plans and daily classroom schedule in accordance with the Primrose Balanced Learning curriculum and programming., • Plans with a member of the Leadership Team the parent-teacher conferences and student evaluations., • Maintains an attractive, well-kept classroom that encourages children to create, explore and make decisions with confidence., • Provides verbal recognition and acceptance to children while providing clear and consistent expectations for the children's behavior., • Accepts responsibility for maintenance and necessary housekeeping duties of the classroom, common use areas and playgrounds., • Attends all required staff meetings, workshops and/or school functions., • Maintains overall professional personal appearance adhering to the guidelines offered in the Primrose School of Kingwood Employee Handbook, • Must meet basic requirements of local child care regulatory agency, • Previous teaching or assistant teaching position in a licensed early childhood program preferred, • Knowledge of the social, emotional and creative needs of young children, • Must be able to lift up to 35 lbs. in connection with the handling of children for the facilitation of programs, child safety, and potential emergency situations. For Infant and Young Toddler teachers, must be able to properly lift infants into and out of a crib., • Infant - Preschool Teachers: 2 year degree in early childhood or related field preferred, • Pre-Kindergarten Lead Teachers: 4 year degree in early childhood or related field required, assistants do not need degree, • Kindergarten Teacher: 4 year degree in early childhood and certified to teach in the state in which the school operates required Primrose Schools and its Franchise Owners are equal opportunity employers. Each Primrose school location is a privately owned and operated franchise. The following locations are happily owned and operated by John and Andrea Schoel: Primrose School at Fall Creek, Primrose School of Kingwood, and Primrose School of Kingwood at Oakhurst. All Staff working at these Primrose locations will enjoy the following benefits: Competitive salaries based on experience Discounted tuition for staff children Full-time hours every week Lower teacher to student ratios, most classes have three full-time teachers Dynamic Leadership team that is supportive to staff Positive, professional and mature co-workers On-site continuing education and professional development Opportunities for growth and advancement Health insurance available after 90-day probationary period Nine paid holidays per year after 90-day probationary period Paid time off/ Vacation time begins accruing after one year of service Anniversary bonus of $100/year per every year of service Weekends off (except Spring Carnival)

Job DescriptionSalary: Ethos Wellness is seeking a dynamic and compassionate Program Director/Coordinator of Children and Adolescent Services to join our team. This role will oversee the development and delivery of comprehensive outpatient services designed to support long-term healing and resilience in children, adolescents, and their families. This position will report directly to the Executive Director. About Us: Ethos Wellness provides outpatient services rooted in Dialectical Behavior Therapy for Children (DBT-C), enhanced by diverse therapeutic modalities including psychoeducation, skills-based groups, experiential interventions, and recovery concepts. Our multidisciplinary team is committed to fostering connection, empowerment, and lasting change through high-quality mental health care. Work Schedule: Monday to Friday, Full-Time, Evenings required (*based on group schedules/availability for crisis management) Key Responsibilities: Program Oversight & Development • Lead, manage, and expand child and adolescent programming, including DBT-C groups, play therapy groups, and Adolescent Intensive Outpatient Programs (IOP), • Drive program innovation aligned with clinical best practices and community needs, • Coordinate with the Ethos Wellness Testing Team to integrate assessment-informed treatment plans Leadership & Supervision • Recruit, hire, and support high-quality clinical staff and interns, • Provide regular supervision and case consultation to team members, including master's-level interns and fellows through the Ethos Training Institute, • Oversee management of team members and patients, including coverage planning, time-off tracking, audit of clinical charts and documentation, and facilitation of team staffings, • Facilitate internal trainings and participate in speaking engagements on relevant clinical topics Clinical Services • Maintain a part-time clinical caseload (1215 direct service hours/week) to stay engaged with client care, • Provide individual, family, and group therapy as appropriate Community Engagement • Build and sustain relationships with community partners, referral sources, and school professionals, • Represent Ethos Wellness in outreach and collaborative efforts to strengthen community connections Operations & Compliance • Assist with policy development, implementation, and quality assurance, • Ensure all services comply with state regulations and ethical guidelines, • Participate in strategic planning and growth of service offerings Qualifications: • Current licensure in Texas as an LPC, LCSW, or LMFT, • Strong Clinical Background in child and adolescent mental health, including play therapy, • Experience providing group therapy, particularly DBT or DBT-C, strongly preferred, • Highly organized, proactive, and collaborative leader, • Comfortable working in a fast-paced, dynamic environment, • Afternoon and evening availability required to support after-school programming Why Join Ethos Wellness? • Ongoing coaching and mentoring for both clinical and professional development, including several hours of free and exclusive CEU opportunities., • Successful marketing provided by the agency; constant flow of new child and adolescent clients seeking both individual and family psychotherapy., • Heart-centered, relational culture; loads of support, encouragement and compassion for this challenging and meaningful work, • Well-run agency with strong leadership and detailed policies and procedures., • Competitive salaried compensation which will be negotiated individually with each applicant, • Excellent Medical, Dental, Vision and Prescription Drug Plan, • Paid Time Off Application Instructions: To apply, please upload your resume and a thoughtful cover letter. Resumes should reflect your clinical training, licensure, and professional experience. In your cover letter, please share your clinical orientation, interest in child and adolescent mental health, and what draws you to this role and to Ethos. We value authenticityyour letter helps us get to know who you are beyond your credentials. Note: Cover letters are reviewed with care and intention they often speak louder than resumes! Please do not call regarding the status of your application. Background checks are required upon hire.

Job Description Take the next step in your career with Morrison Healthcare as a DIETITIAN SPECIALIST in Houston, TX! Location: Morrison Healthcare at Houston Behavioral Healthcare Setting: Behavioral Schedule: M-F Requirement: Must be a Registered Dietitian with a valid CDR # Salary: $65K-$70K We go the extra mile for our Dietitians with benefits designed to support education, career growth, and professional success! Special perks include: • Education Reimbursement – Financial support for advanced learning, • Career Advancement – Growth programs tailored to RDNs, • Board Certifications – Financial rewards for obtaining specialty certifications, • Relocation Assistance – Support when moving 50+ miles (based on location), • Professional Membership Dues, CDR, & Licensure Coverage – We cover your professional fees, • Free CEUs – Through our nutrition education webinar series Why Choose a Career as a Compass Group Dietitian? Compass Group employs over 3,000 RDNs across the United States, making us one of the nation’s largest employers of Dietitians in a variety of settings: • Hospitals and healthcare systems, • Senior living communities, • Schools and universities, • Corporate wellness programs, • Food service operations We offer unmatched opportunities for professional growth: • Specialization, • Leadership development, • Cross-functional career paths The company has earned significant recognition, including being named one of Modern Healthcare's "Top 100 Best Places to Work in Healthcare" for five consecutive years, and appearing on Training Magazine’s Top 125 Organizations list for six straight years. At Compass Group, we prioritize your well-being, work-life balance, and career growth with a comprehensive benefits package: • Health & Wellness – Medical, dental, and vision plans for you and your family, • Financial Security – Life insurance, AD&D, and disability coverage, • Retirement Ready – 401(k) and retirement plans to invest in your future, • Time Off – Flexible/Paid Time Off and holiday pay (varies by site/state), Paid Parental Leave, Personal Leave, • Exclusive Perks – Shopping discounts, commuter benefits, and more, • Wellness & Support – Employee Assistance Program, FSAs, and health programs Key Responsibilities: • Provides /Lead nutrition services in identified specialty area for a minimum of 70% of workload/responsibilities. Specialty areas include NICU, bariatric, renal, cardiac, diabetes, nutrition support, pediatrics, oncology, transplant, geriatrics, and outpatient services. Assesses the nutritional status of patients/ residents through documentation in the medical record, • Trains and mentor’s patient/resident services staff and interns as applicable, • Fosters teamwork and establishes effective strategies to implement innovative programs which leads to optimal clinical nutrition and financial outcomes, • Complies with regulatory standards, including federal, state, and accrediting agencies while adhering to facility confidentiality, HIPAA regulations, and patient/resident rights policies, • Participates in patient/resident satisfaction programs, departmental meetings, and facility wide Quality Assurance/Performance Improvement programs Qualifications: • Credentialed as a Registered Dietitian by the Commission on Dietetic Registration (CDR), • Licensed by the State Dietetics Licensing Board, in states where required, • Two (2) years of experience in area of specialty required, • Specialty certification when applicable Click here to Learn More about the Compass Story Associates may be eligible for additional paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. We encourage applicants with a criminal history (and driving history) to apply. Applications are accepted on an ongoing basis. Compass Group maintains a drug-free workplace.

Job Description Are you an experienced salesperson with a passion for the beverage industry? Do you have a knack for developing strategic sales plans and fostering strong customer relationships? Yerba Madre is seeking a dynamic Key Account Manager to drive sales and expand our market presence within the Non-Traditional channel in the Central region. We're looking for a dedicated, hardworking Key Account Manager (KAM) to oversee and nurture Yerba Madre's non-traditional foodservice business with (Compass/ Aramark/ Sodexo). The role is driving distribution, volume, and execution of programming through the food service channel via the Big Three contract feeders. This role will develop business plans with assigned accounts with the purpose of growing Yerba Madre's consumer pull within foodservice/ vending segments. Your efforts will play a pivotal role in harmonizing our mission with the customers' strategy, creating a win-win partnership. What you'll do for Yerba Madre: • Build an annual business plan (BP) for each customer to deliver against revenue, volume, profit, share goals through a joint business planning process with assigned KAs., • Deliver business plan goals across region and directly managed KA accounts; proactively monitor and manage any adjustments anticipated to have operational/financial impacts., • Develop and maximize ad hoc opportunities as they arise including development of execution plan, expected impact, and budget/investment criteria., • Manage in-store execution and activation through close collaboration with the distribution partner managers (DPM), third party merchandising partners, self-distribution teams, along with our field marketing teams., • Develop and implement promotional programs that are aligned with retailer strategy and Yerba Madre BP, including utilization of data, an understanding of key drivers and customer dynamics to maximize ROI., • Develop and deliver fact-based customer presentations, including annual planning, business reviews, product assortment updates, activation/promotion recaps, and issue/resolution plans (where required). Important to convey company mission and impact work for all customers., • Work collaboratively with distribution, category management, and marketing teams to translate consumer and shopper insights into comprehensive and actionable sell stories to support market and store level execution.Here's what you'll bring to the table:, • 3+ years of CPG industry (beverage preferred) experience working with Compass, Sodexo, Aramark, and Vistar (PFG) at both the HQ and sector levels, • 5+ years' experience in key non-traditional channels such as vending, collegiate, healthcare, and at work, • Current Driver's License with clean driving record and meet DOT driving standards., • Various routes to market experience in DSD (preferably beer and non-alcoholic), Direct warehouse, Broadline Distributors (Vistar, US Foods, Sysco, Dot Foods, • Other relevant experience like office coffee service, connections with specialty retail HQ (Home Depot, Lowes, Ace Hardware, etc.), • Exceptional communication, presentation, planning, negotiation, and analytics skills., • Advanced level Microsoft PowerPoint and excel skills. Here's how you'll be successful:, • Strategic Business Planning: Success in this role involves the ability to build comprehensive annual business plans for each customer, in collaboration with assigned Key Accounts (KAs). These plans should effectively deliver on revenue, volume, profit, and market share goals through a well-structured joint business planning process., • Goal Achievement and Adaptation: Achieving business plan goals is essential. Successful candidates should demonstrate the capability to consistently deliver on objectives across the region and directly managed KA accounts. Additionally, being proactive in monitoring and managing any necessary adjustments to mitigate operational or financial impacts is key., • Proactive Opportunity Utilization: Success is also achieved by actively identifying and maximizing ad hoc opportunities as they arise. This includes the development of execution plans, assessing expected impacts, and applying budget and investment criteria to make sound decisions, contributing to overall growth and profitability.Physical Requirements:, • Ability to lift 15 lbs., • Travel requirements: 20-30%., • Full-time, remote position available to candidates in the US. Salary Range$100,000—$115,000 USD Yerba Madre—formerly Guayakí Yerba Mate—is the nearly 30-year pioneer of regenerative yerba mate [yer-bah ma-tay] and the category leader in ready-to-drink mate beverages across North America. The name Yerba Madre, meaning "Mother Herb," is a tribute to Mother Earth and the ancestral wisdom of the Indigenous communities who have cultivated yerba mate for generations —a reflection of the values the brand has championed since day one. Headquartered in Sebastopol and Venice, California, Yerba Madre sources organic, shade-grown yerba mate in direct partnership with 255 family farmers and Indigenous communities across Argentina, Brazil, and Paraguay. Using its Market Driven Regeneration™ model, every purchase helps reforest the Atlantic Forest, support fair trade premiums, and build long-term economic resilience for grower communities. In 2025, the brand became the world's first yerba mate to achieve Regenerative Organic Certified™ Gold® status——setting a new global standard for ecological integrity, cultural respect, and environmental restoration. As an original founding member of the B Corp community and a founding member of the Purpose Pledge, Yerba Madre is committed to ethical business practices across ten key pillars, including climate positivity, living wages, circularity, and inclusion. Yerba Madre is available in over 45,000 retail locations across the U.S. and Canada. To learn more, visit . Yerba Madre is an equal-opportunity employer committed to creating a diverse and inclusive workplace. All qualified applicants will be treated with respect and receive consideration for employment without regard to race, color, creed, religion, sex, gender identity, genetic information, sexual orientation, national origin, disability, uniform service, Veteran status, age, or any other protected characteristic per federal, state, or local law, including those with a criminal history, in a manner consistent with the requirements of applicable state and local laws, including the CA Fair Chance Initiative for Hiring Ordinance.

Job Description Founded in 1984, Firetrol is the national leader in fire protection & life safety services. We are currently seeking skilled Fire Alarm Technicians for our industrial division to join our team of over 1200 of the best fire protection professionals in the industry. • Perform routine inspections, testing, and preventative maintenance of fire alarm systems with minimal supervision., • Diagnose and evaluate systems that require servicing as well as troubleshoot issues that arise., • Installation of fire alarm equipment and the service, repair and maintenance of fire alarm systems., • Interact with customers, contractors, vendors and other employees in a respectful, professional manner., • 2 to 3 years work experience, training or education in the inspection, installation, maintenance, programming and repair of fire alarm and detection systems., • Experience or training with a variety of fire alarm systems (Notifier, Fire-lite, Silent Knight, etc.), • Texas FAL Required. (Combined with an FEL-A is preferred), • Must possess or be willing to obtain any other applicable state licenses., • Proven record of providing excellent customer service and care. Firetrol offers competitive wages and top-of-the-line benefits that include health, dental vision, life insurance, short and long term disability, generous paid time off practice and a 401(k) plan with a generous company match and immediate vesting. Additionally, sponsors training and education opportunities. Finally, Firetrol offers career growth opportunities, not just a job.

Job Description Founded in 1984, Firetrol is the national leader in fire protection & life safety services. We are currently seeking a skilled Fire Alarm Service Technician to join our team of the best fire protection professionals in the industry. This opening is for the Houston, Texas office. Requirements • Work experience, training or education in the installation, maintenance, programming, inspection, and repair of Fire Alarm systems., • Preference given to those with experience and certification in Notifier., • Exhibit strong verbal communication skills to effectively work with customers, other technicians, sales personnel, and managers., • Ability to work independently and with other team members., • Able to work in a variety of businesses and institutions including commercial, industrial, construction, manufacturing, healthcare, education, and government facilities. Firetrol offers competitive wages and top-of-the-line benefits that include health, dental vision, life insurance, short and long term disability, generous paid time off practice and a 401(k) plan with a generous company match and immediate vesting. Additionally, sponsors training and education opportunities. Finally, Firetrol offers career growth opportunities, not just a job.

Job DescriptionBenefits: • 401(k), • Dental insurance, • Free uniforms, • Health insurance Key Responsibilities: • Operate laser robotic drilling systems to perform precise drilling operations on steel pipes., • Human Machine Interface, • Monitor machine performance, troubleshoot issues, and perform minor mechanical adjustments as needed, • New part number changing over and setting up., • Perform quality checks using inspection tools (calipers, gauges, measuring tape, and microscopes) to ensure parts meet specifications., • Read and interpret blueprints, technical drawings, and production work orders., • Maintain a clean, safe, and organized work area in compliance with company safety policies., • Perform routine preventative maintenance on equipment and report malfunctions to maintenance or engineering., • Record production data and complete all required documentation accurately and on time., • Collaborate with team members, engineers, and supervisors to continuously improve processes and machine performance., • Follow all standard operating procedures (SOPs), safety protocols, and company policies., • Create "Lesson Learned" cards or documentation whenever a problem is solved to capture corrective actions and help reduce future downtime., • Manage spare parts inventory and usage, ensuring critical components are available to prevent production line stoppages due to part shortage, • Take ownership of daily production output and defect rate, ensuring performance targets are met or exceededQualifications:, • High school diploma or GED is required, and technical or vocational training in manufacturing a plus., • Must have HMI experience, • 13 years of experience in a production, CNC, or robotic equipment operation role preferred., • Familiarity with automated manufacturing systems or laser drilling machinery is strongly preferred., • Ability to read and understand mechanical drawings and specifications., • Basic understanding of machine programming is a plus., • Strong attention to detail and commitment to producing high-quality work., • Comfortable working in a fast-paced, hands-on manufacturing environment., • Ability to lift to 40 lbs. and stand for extended periodsSkills and Attributes:, • Mechanically inclined with strong problem-solving skills, • Dependable, punctual, and safety-conscious, • Excellent communication and teamwork abilities, • Willingness to learn and adapt to new technology and processes

Job DescriptionDescription: Job Description: • Candidate must be able to work independently., • Have Working Knowledge of 1 or more of the following controls: Fanuc, Siemens, PLC Programming, Mechanical and Electrical systems on CNC Mills and Lathes. Must be able to Troubleshoot and Identify Parts required to complete repair. Candidate with prior CNC machine operating experience is a plus., • Develop best methods that are in line with the innovative approach that TECH CNC LLC holds as a standard., • Paid Holidays, • Medical, Vision, and Dental, • Career growth, college reimbursement, onsite and outside training, • Bonus program At TECH CNC, we promote diversity and a cross-training mentality to strengthen our team, make them more flexible, and help them gain knowledge through regular company meetings and social team-building events. TECH CNC sets the bar high and invests our time and expertise into our team and clients. We believe that each of our team members has a say and is an integral part of the success and growth of our organization. Advancement is not only an opportunity but an expectation. Position Headquartered in HOUSTON TEXAS. Requirements: Travel Requirements: The majority of the work is in the Houston Metro Area. Must be able to Travel a minimum of 25% throughout the USA. Physical Requirements: Must be able to lift up to 50 lbs., bend, jump, and climb in and out of machines using all safety measures and protocols. Education Requirements: B.A Degree in either Mechanical or Electrical Engineering or Equivalent Preferred but not required with proper experience.

Job DescriptionBenefits: • Competitive salary, • Employee discounts, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development Founded in 1990, FERPA Precision Machine, Inc. is a family-owned business with 35+ years of precision manufacturing expertise. Known for our high-performance plastic seals and oilfield components, weve expanded into small- to medium-sized precision metal parts with a growing focus on aerospace. We blend advanced technology with a client-focused, quality-driven approach, and value each team members contribution in continuing our tradition of excellence. Learn more about FERPA here: Position Summary: We are seeking a Lead CNC Programmer to lead programming, estimating, and process improvement across our shop. This hands-on leader will collaborate with sales to validate manufacturability and quoting, own CNC programming for complex parts, and mentor machinists through setups and prove-outs. By combining estimating accuracy, advanced programming, and process leadership, this role will elevate FERPAs technical capabilities and enable us to deliver increasingly complex, high-performance components. Key Responsibilities: Estimating & Technical Sales Support • Partner with sales and production to lead the technical side of quoting., • Review prints, 3D models, and specifications to confirm manufacturability., • Estimate setup and cycle times for CNC lathes, multi-axis lathes, and multi-axis mills using MasterCAM or equivalent knowledge.Programming & Prove-Outs, • Identify tooling, cutting strategies, and workholding solutions., • Create, verify, and optimize programs for 3-, 4-, and 5-axis mills, lathes, live-tooling lathes, and Swiss machines., • Match job requirements with machine capability and machinist expertise., • Assist with challenging setups, prove-outs, and first-run validation., • Troubleshoot complex machining challenges to ensure dimensional and quality requirements.Process Leadership & Mentorship, • Act as the shops technical authority for CNC programming., • Drive ownership across estimating, programming, and production., • Mentor machinists and programmers to elevate technical capability., • Collaborate with quality, production, and management to resolve issues.Continuous Improvement & Compliance, • Lead process improvement initiatives, including tooling optimization, setup reduction, and workflow efficiency., • Support compliance with industry standards (ISO 9001, AS9100D, or equivalent)., • Lead process improvement (tooling optimization, setup reduction, workflow efficiency)., • Extensive CNC machining experience (10+ years typical) with expertise in programming and estimating., • Proficiency in MasterCAM., • Familiarity with FANUC-controlled CNC machines and G-code programming., • Expert knowledge of milling, turning, tooling, and workholding., • Hands-on machining and setup ability for prove-outs and troubleshooting., • Strong GD&T and 3D CAD model interpretation skills., • Experience machining plastics, stainless steels (300 series, Nitronic 60), PH stainless (15-5, 17-4), aluminum bronze, MP35N, Inconel., • Familiarity with broaching, tailstock setups, gun-drilling, sub-spindle second ops, and angled lockwire drilling., • Experience working with tight tolerances and SAE aerospace standards.

Clean Harbors is searching for a licensed, reliable and safety oriented I&E Technician to join our Deer Park, TX team! The Electrical and Instrumentation Technician will be responsible for performing hands-on instrument checks, calibrations, and PLC Ladder Logic, along with diagnosing issues with control circuitry and assisting the electrical and maintenance departments with various tasks as needed. * Must be a licensed journeyman electrician or equivalent * Why work for Clean Harbors? * Health and Safety is our #1 priority and we live it 3-6-5! * Competitive pay and benefits * Comprehensive health benefits coverage after 30 days * Group 401K with company matching component * Employee Stock Purchase Plan * Generous paid time off, company paid training and tuition reimbursement * Positive and safe work environments * Opportunities for growth and development for all the stages of your career RESPONSIBILITIES * Ensures that Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and always acting in a safe manner * Troubleshoots instrument and control malfunctions * Performs preventative maintenance checks and calibrations * Maintains accurate records and logs as required * Installs new system controls (including power wiring) * Installs cabling, power distribution systems, and motor control centers * Services and replaces motors and lighting * Performs general electrical maintenance * Other duties as assigned QUALIFICATIONS What does it take to work for Clean Harbors? * HS Diploma OR Equivalent required * Texas Journeyman Electrician License * PLC Ladder Logic * VFD (Variable Frequency Drive) Programming knowledge preferred * Experience reading blueprints, and electronic schematics * Proficiency reading process and instrumentation diagrams (PIDs) * Knowledge of Data Control Systems (DCS) * Experience with 480v and below * Lift up 50lb, climbing ladders, stooping, bending, standing for long periods of time * Must be able to work in all weather conditions Clean Harbors is an equal opportunity employer. Clean Harbors is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact or 1-844-922-5547. Clean Harbors and its subsidiaries are a Military & Veteran friendly company. *CH #LI-MM1

Job Description Digi Security Systems is an industry leader in the design, installation and support of custom video surveillance, electronic access control, and intrusion detection solutions for public and private partners. We've built our reputation on innovation and reliable service, and we're known as the industry's experts. Position Overview We are seeking an experienced Field and Service Engineer to join our operations in the Houston, TX area. Hourly rate for this position is dependent on experience. This person will be responsible for performing the most skilled security technician work in the service, troubleshooting, alternation and programming of all security related systems. Field Engineers, also known as Elite Resource Technicians at Digi, are service providers who support Digi's internal and external operations by providing custom programming, training, and technical advisement. This individual must have a expert background in installing and servicing Access Control, CCTV, and Burglar/Intrusion Alarm Systems and at least seven (7) years of experience working in the commercial security systems field. Main Responsibilities: • Service: Responsible for the professional service of access control, CCTV, and burglar/intrusion alarm systems., • Programming: Ensures project systems are programmed to the highest standard and organized to work well for the client. Often includes customized programming to meet specific Partner needs., • Networking: Complete high level integration and programming of systems, using both networks and servers., • Quality Control: Complete internal audits of Digi's projects, and ensures that highest standard of installation is upheld. Write course content and provide technical expertise for Digi's internal learning and development initiatives., • Leadership: Provide on-the-job training and mentoring on-site to technicians on their team. Collaborate with other Elite Resources to create standard operating procedures, work exemplars, and training sessions., • Communication: Respectfully communicates with all local Partner and internal staff on daily progress and all necessary information on any service call or project., • 2 weeks vacation accrual rate and PTO rate, • 3 weeks vacation accrual rate after first year of employment, • 7 company-wide paid holidays throughout the year, • On-call bonuses, • 401k plan w/corporate matching structure, • Full health benefits offered - medical, dental and vision, • Included life insurance, additional available for purchase, • Accident/critical illness insurance available for purchase, • Full set of Hilti tools, • All hand tools and consumables paid for by company, • Required training/licensing paid for by company, • Voluntary professional development opportunities, • Company laptop, company phone, uniforms and gear, • Company vehicle or personal vehicle allowance, • Yearly stipend for steel-toed boots and work pants, • Ability to lift/move equipment and tools weighing up to 50 lbs., • Ability to work from ladders or man lifts at extended heights., • Must be able to differentiate colors., • Must be comfortable standing for long periods of time and complete overhead work for long periods of time.

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you're searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve's position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: We are seeking a Maintenance Mechanic for one of our manufacturing plants. The Maintenance Mechanic will be responsible for maintaining, troubleshooting and repair of a variety of CNC machines, test equipment, parts washers, and others. Emphasis will be placed on electrical repair aptitude, as the Maintenance Mechanic will need to effectively troubleshoot items such as servo drives and electrical switches. This is a First Shift Opportunity- Monday-Friday 6:00am-2:30pm. Responsibilities & Requirements: • Troubleshoot, operate, install, and program panel views and HMI devices, • Troubleshoot and repair valve testing equipment, • Diagnose and repair mechanical failures on ovens, blowers, and fans, • Verifies alignment and tolerances of moving parts, tests operations of assemblies, • Layout, measure, size, bend and install electrical conduit, • Troubleshoot and program AC/CD drives and motors, • Effectively troubleshoot relay logic circuits - requires experience with gas train circuitry, • Effectively troubleshoot, size, and install transformers, • Effectively lays out, measures, threads, and installs pipe, • Troubleshoot and repair processed water system, • Troubleshoot and repair hydraulic systems, • Troubleshoot and repair injection molding equipment, • Use precision measuring tools, voltmeters, ammeters, and oscilloscopes, • Apply knowledge and understanding of machining controls, troubleshooting, and programming skills, • Troubleshoot ladder logic programs, • Troubleshoot machine heating controls, i.e. controllers, heaters, molds and solid-state relays, • Technical training in electrical maintenance, • Able to read blueprints and specifications, • Hands-on experience in the manufacturing industry, • Experience diagnosing/repairing mechanical industrial equipment, such as lathes, milling machines, CNC etc.; includes use of precision measuring tools and testing equipment, • Good understanding of electrical systems including 3 phase, • Basic knowledge of plumbing and pneumatic controls, • Must be willing to learn new skills, • Ability to determine material needs and specifications for projects, • Creates detail bill of materials (BOMs) for project, • Experience operating machines, • Background with PLC, • Experience with machine heating controls Req ID : R-15454 Job Family Group : Operations Job Family : OP Maintenance Mechanic EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers.com as result of your disability. You can request a reasonable accommodation by sending an email to [email protected]. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

DOVER PRECISION COMPONENTS: Dover Precision Components is part of Dover Corporation's Pumps and Process solutions segment. DPC holds market leading positions globally and delivers performance-critical solutions across the oil & gas, power generation, marine, industrial, chemical and general processing markets. We design and manufacture mission-critical equipment components to deliver more affordable, cleaner energy solutions and enable manufacturers to operate more efficiently. WE DELIVER CUSTOMER SUCCESS Dover Precision Components delivers products and services that enhance performance, improve safety, reduce carbon emissions, and accelerate clean energy adoption, through collaborative customer relationships, expert engineering, and an innovative culture. Our strong Company portfolio is comprised of long products and services offered under Cook Compression, Cook Mechanical Field Services, Waukesha Bearings, Waukesha Magnetic Bearings, Inpro/Seal, Bearings Plus, and FW Murphy Production Controls. Our global footprint reaches more than twelve locations in the Americas and more than six locations in Europe and China. BUILDING POTENTIAL. SUSTAINING PERFORMANCE. BOOSTING FUTURES. We are diligent in recognizing our employees' needs and providing an enriching experience through professional developmental opportunities. Our authentic, collaborative company culture, combined with a competitive suite of health and welfare offerings, emulates who we are. We are Dover Precision Components, #LifeAtDPC Summary: Skilled to setup, adjust and operate CNC lathes and/or mills and special types of machine tools. Performs diversified machining operations largely on standard work having tolerance and finish specifications requiring a general knowledge of machining practices and techniques. This position must have the ability to perform the following: Responsibilities: • Works from drawings, sketches and specifications in completing various machining operations., • Ability to edit CNC programs to manufacture parts per blueprint/drawings., • Performs machine set ups to obtain close tolerances, fitting and alignment of machined parts., • Obtains required inspections on first pieces of a run according to prescribed procedure and performs inspections on work-in-progress using a wide variety of measuring devices., • Completes and maintains all necessary records of time, part counts, first piece inspections, and requisition forms, etc. for each job., • Makes jigs, fixtures or other specialized non-production devices as qualified and assigned., • Acquires raw material, supplies, tools, etc. when necessary., • Maintains a clean orderly work area, works safely, and conforms to all quality procedures and standards., • Performs first piece inspections on basic product for other machinists, as qualified and assigned., • Grinds tools when necessary., • Performs routine preventative maintenance of machines according to PM schedule., • Trouble shoots drawings, machining, tooling, programming, material, etc. and making competent decisions pertaining to job at hand., • Maintains and monitors machine shop equipment. Safeguards against improper use and incorrect set ups to prevent extensive damage to machine or specific sections., • Detects errors with frequent tolerance/quality checks., • High school diploma or equivalent required., • Technical training in shop math and blueprint reading, • Clear communication, both oral and written, • Organization skills; keep area clean to 5S standards, • Exposure to normal machine shop environment with periodic noise. Limited disagreeable factors present.We consider several job-related, non-discriminatory factors when determining the pay rate for a position, including, but not limited to, the position's responsibilities, a candidate's work experience, a candidate's education/training, the position's location, and the key skills needed for the position. Pay is one of the Total Rewards that we provide to compensate and recognize employees for their work. Benefits: Our total rewards package for eligible team members also includes: a 401(k) savings plan with employer contributions; medical, dental and vision insurance; wellness programs; health savings account, health care and dependent care flexible spending accounts; company paid short-term disability and long-term disability; company paid employee basic life and AD&D insurance; supplemental employee and dependent life insurance; optional accident, hospital indemnity and critical illness insurance; adoption, surrogacy, and fertility benefits and assistance; commuter benefits; parental, military, jury duty, and bereavement leaves of absence; paid time off, including 9 paid holidays and 2 floating holidays per calendar year, paid vacation days, 24 paid sick leave hours annually, tuition assistance; wellness reimbursement; business travel services; employee discounts; and an employee assistance program that includes company paid counseling sessions and legal services. Eligibility for benefits is governed by applicable plan documents and policies. All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law. Attention Applicants: If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, please let us know. Likewise, if you are limited in the ability to access or use this online application process and need an alternative method for applying, we will determine an alternate way for you to apply. Please contact [email protected] assistance with an accommodation. Kindly specify Job Requisition Number / Job Title and Location in response. Nearest Major Market: Houston Job Segment: CNC, Machinist, Environmental Engineering, Industrial, Engineer, Manufacturing, Engineering

JOB DESCRIPTION If you're a Lean-minded engineer with a strong electrical and automation background, Emerson has an outstanding opportunity for you at our Crossridge Manufacturing Facility in Houston, Texas. As an Electrical Manufacturing Engineer, you will drive both operational excellence and technical expertise in manufacturing. You will improve production processes and layouts, support advanced electrical/mechanical assemblies, and ensure seamless integration of controls and communication systems. By combining your Lean leadership with hands-on technical knowledge, you'll help us achieve our goals of Best Customer Service and Perfect Execution. What You'll Do \n • Lead the deployment of Lean practices across manufacturing operations to improve flow, reduce waste, and standardize work.\n, • Work hands-on with electrical and electromechanical assemblies, including PLCs, controls, PCBA, motors, and power cards.\n, • Support firmware, configuration, and communication protocol troubleshooting of products during manufacturing.\n, • Apply working knowledge of industrial communication protocols (Profibus, Modbus, HART, MQTT, etc.) to support product and process integration.\n, • Collaborate with production teams to ensure robust automation and controls systems are implemented, tested, and sustained.\n, • Facilitate Kaizen, SMED, and continuous improvement events that strengthen safety, quality, delivery, and cost performance.\n, • Actively participate in Daily Management and GEMBA to identify issues, coach teams, and implement corrective actions.\n\n Who You Are: \n • A hands-on engineer with both Lean transformation experience and deep technical expertise in automation/controls.\n, • A strong communicator who works effectively across functions and levels.\n, • A problem solver who can simplify complexity, create repeatable processes, and deliver sustainable improvements.\n, • Someone energized by both continuous improvement and technical innovation.\n\n For This Role, You Will Need: \n • Bachelor's degree in Engineering (Electrical, Mechanical, Aerospace, Automation, or related technical field).\n, • \n3+ years of Lean implementation experience with measurable, sustainable results.\n, • Strong knowledge of PLC programming, controls, and automation systems.\n, • Experience with electrical/mechanical assemblies, including firmware flashing, configuration, and validation.\n, • Working knowledge of industrial communication protocols (Profibus, Modbus, HART, MQTT, etc.).\n, • Demonstrated use of Lean tools such as VSM, 5S, Standard Work, Continuous Flow, and Material Flow.\n, • Ability to travel domestically and internationally up to 15%.\n\n Preferred Qualifications That Set You Apart: \n • Experience with PCBA, power cards, and motors.\n, • Familiarity with Toyota Production System (TPS) principles.\n, • Prior experience supporting automation integration within a high-mix manufacturing environment.\n\n Our Culture & Commitment to You: At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives-because we know that great ideas come from great teams. Our dedication to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results. We recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet you and your family's physical, mental, financial, and social needs. We provide a variety of medical insurance plans, with dental and vision coverage, Employee Assistance Program, 401(k), tuition reimbursement, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave. Learn more about our Culture & Values! ABOUT US WHY EMERSON Our Commitment to Our People At Emerson, we are motivated by a spirit of collaboration that helps our diverse, multicultural teams across the world drive innovation that makes the world healthier, safer, smarter, and more sustainable. And we want you to join us in our bold aspiration. We have built an engaged community of inquisitive, dedicated people who thrive knowing they are welcomed, trusted, celebrated, and empowered to solve the world's most complex problems - for our customers, our communities, and the planet. You'll contribute to this vital work while further developing your skills through our award-winning employee development programs. We are a proud corporate citizen in every city where we operate and are committed to our people, our communities, and the world at large. We take this responsibility seriously and strive to make a positive impact through every endeavor. At Emerson, you'll see firsthand that our people are at the center of everything we do. So, let's go. Let's think differently. Learn, collaborate, and grow. Seek opportunity. Push boundaries. Be empowered to make things better. Speed up to break through. Let's go, together. Work Authorization Emerson will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1(including those with OPT or CPT) , H-1, H-2, L-1, B, J or TN, or who need sponsorship for work authorization now or in the future, are not eligible for hire. Equal Opportunity Employer Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment. Accessibility Assistance or Accommodation If you have a disability and are having difficulty accessing or using this website to apply for a position, please contact: [email protected]. ABOUT EMERSON Emerson is a global leader in automation technology and software. Through our deep domain expertise and legacy of flawless execution, Emerson helps customers in critical industries like life sciences, energy, power and renewables, chemical and advanced factory automation operate more sustainably while improving productivity, energy security and reliability. With global operations and a comprehensive portfolio of software and technology, we are helping companies implement digital transformation to measurably improve their operations, conserve valuable resources and enhance their safety. We offer equitable opportunities, celebrate diversity, and embrace challenges with confidence that, together, we can make an impact across a broad spectrum of countries and industries. Whether you're an established professional looking for a career change, an undergraduate student exploring possibilities, or a recent graduate with an advanced degree, you'll find your chance to make a difference with Emerson. Join our team - let's go! No calls or agencies please.

Company Description Location: 4001 Fair Dr., Pasadena, TX 77507 Walk-ins welcome! Meet our hiring team, tour the facility, and interview onsite. Eligibility: To attend, you must have CNC Machinist experience or formal training. John Crane, a business of Smiths Group, is a global leader in mission-critical flow control solutions for energy and process industries that enable efficient and sustainable operations. Our products include mechanical seals and systems, couplings, bearings, filtration systems, and predictive digital monitoring technologies. We have a global network of more than 200 sites in over 50 countries and employ more than 6,000 people worldwide. We partner with our customers to help them keep their operations safe, reduce downtime, improve efficiency, and meet the latest environmental standards. John Crane is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, helping to create a safer, more efficient, productive, and better-connected world across four global markets: energy, security & defense, space & aerospace, and general industrial. Listed on the London Stock Exchange, Smiths employs approximately 16,000 colleagues in over 50 countries. Job Description Sets up, writes programs and edits existing programs, and operates numerically controlled machinery. These include but are not limited to lathes, mills, drills, and other machinery as required. \n • Maintains quality and tolerances within .0003".\n, • Follow written and verbal procedures for machining and other duties.\n, • Work from work order routings, prints, sketches, layout sheets, written and verbal instructions.\n, • Working knowledge of programming languages and the ability to learn / adapt per machine.\n, • Must be able to recognize and understand functions of machine parameters with the ability to modify as required per supervisor's instructions.\n, • Utilize knowledge of working properties for a variety of materials such as stainless steel, alloy steel, cast iron, brass, exotics, etc.\n, • Presets tools and may be required to re-sharpen.\n, • Inspect work produced using micrometer; bore gage, venire calipers, or other measuring instruments to verify conformance to specifications.\n, • Follow preventative maintenance procedures on equipment as prescribed by supervisor and report operating difficulties of equipment to supervisor.\n, • Perform duties in accordance with company safety policies, reports unsafe conditions to supervisor.\n, • Make proper labor and time reports.\n, • Perform other duties as required.\n, • Keep machine(s) / work area clean and orderly.\n, • Perform additional duties and responsibilities based upon individual branch requirements.\n, • Additional duties as assigned.\n\n Qualifications \n • High school diploma or equivalent with a technical school education and working machinist knowledge or equivalent.\n, • CNC machine tool Programming & Operating experience preferred.\n, • 2 years of Integrex experience is highly preferred.\n, • Numerical control machining skills experience and ability to read and interpret work related machine drawings.\n, • Make average to complicated mathematical calculations and resolve elementary technical problems.\n, • CNC Programmer/Operator will be compensated in accordance with defined expertise, experience and production efficiency.\n, • Can operate a minimum of 2 CNC machine tools.\n, • Possesses previous experience as a Manual machinist.\n, • Must be detail oriented; be able to work independently using sound judgment.\n, • Good verbal, written, problem solving and organization skills required.\n, • Capable of handling multiple priorities.\n, • 2nd Shift: Monday-Friday, 4:30 PM - 3:30 AM\n, • Weekend Shift: Friday-Sunday, 6:00 AM - 6:00 PM (36 hrs paid as 40) lunch included\n Additional Information With colleagues stretching across the globe, we are proud of our diversity. To foster inclusivity, we run employee resource groups (ERGs) to provide a safe space for employees to connect and support each other. Our cross-business ERGs include Veterans, Pride Network, Black Employee Network, Women@Work Network, and Neurodiversity. Across our company, we recognize excellence, culminating in the Smiths Excellence Awards, our annual celebration of the most extraordinary activities, people, and projects that best showcase our strengths and help drive our business forward. We announce these on our annual Smiths Day, a global celebration of Smiths around our network. Join us for a great career with competitive compensation and benefits, while helping engineer a better future. We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation - including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career's website (Careers - Smiths Group plc)

JOB DESCRIPTION Are you ready to take the next step in your technical career? We're looking for a Quality Inspector to join our team in Stafford, TX. In this role, you'll play a key part in ensuring our products meet the highest standards of quality and reliability. You'll perform detailed inspections using precision and non-precision measurement tools, follow established procedures and standards, and help maintain our dedication to excellence in every product we deliver! In This Role, Your Responsibilities Will Be: \n • Responsible for the evaluation of a finished product for quality and reliability\n, • Performs inspection tasks anywhere in the facility or outside of the facility as directed\n, • Troubleshoots rejected materials and communicates with the Quality Manager or Quality Supervisor\n, • Determines and documents findings of inspection tasks (i.e. accepts or rejects)\n \n Who You Are: You quickly and decisively act in fact-changing, unexpected situations. You adjust communication content and style to meet the needs of diverse collaborators. You build and implement plans that allocate resources accurately. You understand that different situations may call for different approaches. You find common ground and acceptable alternatives that satisfy the needs of multiple partners. You serve as a strategic partner to build, grow, and maintain profitable and long-lasting relationships with key accounts. For This Role, You Will Need: \n • High School Diploma or equivalent experience or GED required\n, • Minimum of 3-5 years previous experience as a Quality Inspector in an industrial manufacturing environment\n, • Understands quality management systems\n, • Ability to read and understand complex manufacturing drawings\n, • Understands and is proficient with micrometers, dial bore gauges, snap ring gauges, plug gauges, thread gauges and other measurement tools and equipment\n, • Communicates effectively; good oral/written communication skills \n, • Understands CMM programming (preferred)\n \n Our Culture & Commitment to You: At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives-because we know that great ideas come from great teams. Our dedication to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results. We recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet you and your family's physical, mental, financial, and social needs. We provide a variety of medical insurance plans, with dental and vision coverage, Employee Assistance Program, 401(k), tuition reimbursement, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave. Learn more about our Culture & Values! ABOUT US WHY EMERSON Our Commitment to Our People At Emerson, we are motivated by a spirit of collaboration that helps our diverse, multicultural teams across the world drive innovation that makes the world healthier, safer, smarter, and more sustainable. And we want you to join us in our bold aspiration. We have built an engaged community of inquisitive, dedicated people who thrive knowing they are welcomed, trusted, celebrated, and empowered to solve the world's most complex problems - for our customers, our communities, and the planet. You'll contribute to this vital work while further developing your skills through our award-winning employee development programs. We are a proud corporate citizen in every city where we operate and are committed to our people, our communities, and the world at large. We take this responsibility seriously and strive to make a positive impact through every endeavor. At Emerson, you'll see firsthand that our people are at the center of everything we do. So, let's go. Let's think differently. Learn, collaborate, and grow. Seek opportunity. Push boundaries. Be empowered to make things better. Speed up to break through. Let's go, together. Work Authorization Emerson will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1(including those with OPT or CPT) , H-1, H-2, L-1, B, J or TN, or who need sponsorship for work authorization now or in the future, are not eligible for hire. Equal Opportunity Employer Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment. Accessibility Assistance or Accommodation If you have a disability and are having difficulty accessing or using this website to apply for a position, please contact: [email protected]. ABOUT EMERSON Emerson is a global leader in automation technology and software. Through our deep domain expertise and legacy of flawless execution, Emerson helps customers in critical industries like life sciences, energy, power and renewables, chemical and advanced factory automation operate more sustainably while improving productivity, energy security and reliability. With global operations and a comprehensive portfolio of software and technology, we are helping companies implement digital transformation to measurably improve their operations, conserve valuable resources and enhance their safety. We offer equitable opportunities, celebrate diversity, and embrace challenges with confidence that, together, we can make an impact across a broad spectrum of countries and industries. Whether you're an established professional looking for a career change, an undergraduate student exploring possibilities, or a recent graduate with an advanced degree, you'll find your chance to make a difference with Emerson. Join our team - let's go! No calls or agencies please.

JOB DESCRIPTION If you are a Senior CNC Programmer looking for an opportunity to grow, Emerson has an exciting opportunity for you! Based in Houston, TX, the Senior CNC Programmer is responsible for operating CNC machines which include Mazak Mill and Haas Mills. In This Role, Your Responsibilities Will Be: \n • Able to interpret drawings, manuals, specifications or first article parts to determine dimensions and tolerances of finished work pieces, sequence of operations and set up requirements \n \n \n • Follow documented policies and procedures as designated by the company's Quality System \n \n \n • Communicates with production leads, supervisors or Manager, for assignments and to resolve machining or quality issues \n \n \n • Maintain a safe working environment for all machine shop employees \n \n \n • Perform CNC operations or any other task assigned to produce quality parts that meet all print requirements \n \n \n • Determine setup requirements and select tooling speeds and feeds for optimized tool life and program efficiency. \n \n \n • Analyze engineering drawings, specifications, and work orders to determine the best tooling and machining process. \n \n \n • Responsible for completing changes to existing CNC programs including set-ups and edit programs with minimum assistance from shop leads \n \n \n • Follow detailed operation instructions, processes and procedures \n \n \n • Able to safely and correctly operate hand and power tools and machinery, including forklifts, semi-automated material handling equipment, and overhead cranes \n \n \n • Participate in training and continuing education \n \n \n • Work overtime as required\n \n Who You Are: \n • You identify and seize new opportunities. You persist in accomplishing objectives despite obstacles and setbacks. You work cooperatively with others across the organization to achieve shared objectives. \n \n \n For This Role, You Will Need: \n • High School Diploma or GED \n \n \n • Minimum of 5 years' experience in set up, operation and programming of CNC Mills \n \n \n • Experience writing and editing computerized numerical control programs \n \n \n • Experience setting up and operating CNC machines with understanding of cutting tool selection and application. \n \n \n • Knowledge of G & M code \n \n \n • Experience blueprint reading skills and GD&T understanding. \n \n \n • Able to use precision measuring instruments. Instruments should include but are not limited to calipers, ID and OD micrometers, depth gauges, indicators and scales \n \n \n • Knowledge and experience with horizontal milling and vertical milling \n \n \n • Basic math skills needed for CNC programming calculations \n \n \n • Must be able to work with little or no supervision in a safe and efficient manner \n \n \n • Experienced in the proper and safe use of hand and light power tools \n \n \n • Able to lift parts weighing in excess of 50 pounds (assistance when needed) and to work in a bending, standing, or squatting positions for long periods of time (excess of one hour)\n, • Legal authorization to work in the United States (sponsorship is not available for this position)\n \n Preferred Qualifications That Set You Apart: \n • Effective communication skills: verbal and written (English) \n \n \n • Follow written and/or oral instructions in English \n \n \n • Pass forklift certifications and requirements to operate forklifts \n \n Our Culture & Commitment to You: At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives-because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results. We recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet you and your family's physical, mental, financial, and social needs. We provide a variety of medical insurance plans, with dental and vision coverage, Employee Assistance Program, 401(k), tuition reimbursement, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave. #LI-CB3 ABOUT US WHY EMERSON Our Commitment to Our People At Emerson, we are motivated by a spirit of collaboration that helps our diverse, multicultural teams across the world drive innovation that makes the world healthier, safer, smarter, and more sustainable. And we want you to join us in our bold aspiration. We have built an engaged community of inquisitive, dedicated people who thrive knowing they are welcomed, trusted, celebrated, and empowered to solve the world's most complex problems - for our customers, our communities, and the planet. You'll contribute to this vital work while further developing your skills through our award-winning employee development programs. We are a proud corporate citizen in every city where we operate and are committed to our people, our communities, and the world at large. We take this responsibility seriously and strive to make a positive impact through every endeavor. At Emerson, you'll see firsthand that our people are at the center of everything we do. So, let's go. Let's think differently. Learn, collaborate, and grow. Seek opportunity. Push boundaries. Be empowered to make things better. Speed up to break through. Let's go, together. Work Authorization Emerson will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1(including those with OPT or CPT) , H-1, H-2, L-1, B, J or TN, or who need sponsorship for work authorization now or in the future, are not eligible for hire. Equal Opportunity Employer Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment. Accessibility Assistance or Accommodation If you have a disability and are having difficulty accessing or using this website to apply for a position, please contact: [email protected]. ABOUT EMERSON Emerson is a global leader in automation technology and software. Through our deep domain expertise and legacy of flawless execution, Emerson helps customers in critical industries like life sciences, energy, power and renewables, chemical and advanced factory automation operate more sustainably while improving productivity, energy security and reliability. With global operations and a comprehensive portfolio of software and technology, we are helping companies implement digital transformation to measurably improve their operations, conserve valuable resources and enhance their safety. We offer equitable opportunities, celebrate diversity, and embrace challenges with confidence that, together, we can make an impact across a broad spectrum of countries and industries. Whether you're an established professional looking for a career change, an undergraduate student exploring possibilities, or a recent graduate with an advanced degree, you'll find your chance to make a difference with Emerson. Join our team - let's go! No calls or agencies please.

JOB DESCRIPTION If you are a CNC Set-Up & Edit looking for an opportunity to grow, Emerson has an exciting opportunity for you! Based in Houston, TX, the CNC Set-Up and Edit Operator is responsible for operating CNC machines to produce quality products. The CNC Operator is able to edit and set-up machines such as Mazak Mill and Haas Mill. In This Role, Your Responsibilities Will Be: \n • Perform CNC operations or any other task assigned to produce quality parts that meet all print requirements \n \n \n • Able to interpret drawings, manuals, specifications or sample parts to determine dimensions and tolerances of finished work pieces, sequence of operations and set up requirements \n \n \n • Perform setup requirements and select tooling speeds and feeds for optimized tool life and program efficiency. \n \n \n • Follow detailed operation instructions, processes and procedures \n \n \n • Able to safely and correctly operate hand and power tools and machinery, including forklifts, semi-automated material handling equipment, and overhead cranes \n \n \n • Participate in training and continuing education \n \n \n • Perform shop environment duties as assigned \n \n \n • Work overtime as required \n \n Who You Are: \n • You identify and seize new opportunities. You persist in accomplishing objectives despite obstacles and setbacks. You work cooperatively with others across the organization to achieve shared objectives. \n \n For This Role, You Will Need: \n • High School Diploma or GED \n \n \n • Minimum of 2 years' experience in set up, operation and programming of CNC Mill machines \n \n \n • Able to use precision measuring instruments. Instruments should include but are not limited to calipers, ID and OD micrometers, depth gauges, indicators and scales \n \n \n • Ability to read & Comprehend engineering drawings \n \n \n • Understanding of writing and editing computerized numerical control programs milling and turning. \n \n \n • Understanding of setting up and operating CNC machines with knowledge of cutting tool selection and application. \n \n \n • Understanding of G&M Codes \n \n \n • Understand blueprint reading skills and GD&T understanding. \n \n \n • Basic math skills needed for CNC programming calculations \n \n \n • Must be able to work with little or no supervision in a safe and efficient manner \n, • Experienced with proper PPE requirements/ selection and safe use of hand and light power tools\n \n \n • Able to lift parts weighing in excess of 50 pounds (assistance when needed) and to work in a bending, standing, or squatting positions for long periods of time (excess of one hour)\n, • Legal authorization to work in the United States (sponsorship is not available for this position)\n \n Preferred Qualifications That Set You Apart: \n • Effective communication skills: verbal and written (English) \n \n \n • Follow written and/or oral instructions in English \n \n \n • Pass forklift certifications and requirements to operate forklifts \n \n Our Culture & Commitment to You: At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives-because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results. We recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet you and your family's physical, mental, financial, and social needs. We provide a variety of medical insurance plans, with dental and vision coverage, Employee Assistance Program, 401(k), tuition reimbursement, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave. #LI-CB3 ABOUT US WHY EMERSON Our Commitment to Our People At Emerson, we are motivated by a spirit of collaboration that helps our diverse, multicultural teams across the world drive innovation that makes the world healthier, safer, smarter, and more sustainable. And we want you to join us in our bold aspiration. We have built an engaged community of inquisitive, dedicated people who thrive knowing they are welcomed, trusted, celebrated, and empowered to solve the world's most complex problems - for our customers, our communities, and the planet. You'll contribute to this vital work while further developing your skills through our award-winning employee development programs. We are a proud corporate citizen in every city where we operate and are committed to our people, our communities, and the world at large. We take this responsibility seriously and strive to make a positive impact through every endeavor. At Emerson, you'll see firsthand that our people are at the center of everything we do. So, let's go. Let's think differently. Learn, collaborate, and grow. Seek opportunity. Push boundaries. Be empowered to make things better. Speed up to break through. Let's go, together. Work Authorization Emerson will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1(including those with OPT or CPT) , H-1, H-2, L-1, B, J or TN, or who need sponsorship for work authorization now or in the future, are not eligible for hire. Equal Opportunity Employer Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment. Accessibility Assistance or Accommodation If you have a disability and are having difficulty accessing or using this website to apply for a position, please contact: [email protected]. ABOUT EMERSON Emerson is a global leader in automation technology and software. Through our deep domain expertise and legacy of flawless execution, Emerson helps customers in critical industries like life sciences, energy, power and renewables, chemical and advanced factory automation operate more sustainably while improving productivity, energy security and reliability. With global operations and a comprehensive portfolio of software and technology, we are helping companies implement digital transformation to measurably improve their operations, conserve valuable resources and enhance their safety. We offer equitable opportunities, celebrate diversity, and embrace challenges with confidence that, together, we can make an impact across a broad spectrum of countries and industries. Whether you're an established professional looking for a career change, an undergraduate student exploring possibilities, or a recent graduate with an advanced degree, you'll find your chance to make a difference with Emerson. Join our team - let's go! No calls or agencies please.

Job DescriptionBenefits: • Competitive salary, • Dental insurance, • Health insurance, • Training & development As an Infant Teacher at Primrose School of Kingwood at Oakhurst, located at 19514 Northpark Drive, Kingwood Texas 77339 you will help young minds explore, discover and understand the world around them. We are seeking an experienced and enthusiastic Teacher to plan and implement an ongoing program of activities that promote the social, emotional, cognitive and physical development of each child, in accordance with the Primrose Balanced Learning approach to teaching and learning. This position requires caregiving for 6 weeks to 14 months age children. Primrose School of Kingwood at Oakhurst is an accredited private preschool that provides a premier educational childcare experience. We offer year-round programs for children from infant through elementary-aged school age. Primary Responsibilities: • Is responsible for the overall supervision and daily class functions of a group of children., • Observes all rules and regulations at Primrose School of Kingwood at Oakhurst and the local, state or national regulatory agencies pertaining to the health, safety and care of children., • Implements the approved lesson plans and daily classroom schedule in accordance with the Primrose Balanced Learning curriculum and programming., • Maintains an attractive, well-kept classroom that encourages children to create, explore and make decisions with confidence., • Provides verbal recognition and acceptance to children while providing clear and consistent expectations for the children's behavior., • Accepts responsibility for maintenance and necessary housekeeping duties of the classroom, common use areas and playgrounds., • Maintains overall professional personal appearance adhering to the guidelines offered in the Primrose School of Kingwood at Oakhurst Employee Handbook, • Assists in other capacities that Director, or designee, determines is necessary. Desired skills and experience: • Must meet basic requirements of local child care regulatory agency, • Previous teaching or assistant teaching position in a licensed early childhood program preferred, • Knowledge of the social, emotional and creative needs of young children, • Competitive salaries based on experience, • Discounted tuition for staff children, • Full-time hours every week, • Lower teacher to student ratios, classes have three full-time teachers, • Dynamic Leadership team that is supportive to staff, • Positive, professional and mature co-workers, • On-site continuing education and professional development, • Opportunities for growth and advancement, • Health insurance available after 90-day probationary period, • Nine paid holidays per year after 90-day probationary period, • Paid time off/ Vacation time begins accruing after one year of service, • Anniversary bonus of $100/year per every year of service, • Weekends off (except Spring Carnival)

Job DescriptionBenefits: • Competitive salary, • Dental insurance, • Health insurance, • Opportunity for advancement Primary Responsibilities: • Is responsible for the overall supervision and daily class functions of a group of children., • Observes all rules and regulations at Primrose School of Kingwood and the local, state or national regulatory agencies pertaining to the health, safety and care of children., • Assesses each child's developmental needs on an ongoing basis., • Implements the approved lesson plans and daily classroom schedule in accordance with the Primrose Balanced Learning curriculum and programming., • Plans with a member of the Leadership Team the parent-teacher conferences and student evaluations., • Maintains an attractive, well-kept classroom that encourages children to create, explore and make decisions with confidence., • Provides verbal recognition and acceptance to children while providing clear and consistent expectations for the children's behavior., • Accepts responsibility for maintenance and necessary housekeeping duties of the classroom, common use areas and playgrounds., • Attends all required staff meetings, workshops and/or school functions., • Maintains overall professional personal appearance adhering to the guidelines offered in the Pirmrose School of Kingwood Employee Handbook., • Must meet basic requirements of local child care regulatory agency, • Previous teaching or assistant teaching position in a licensed early childhood program preferred, • Knowledge of the social, emotional and creative needs of young children, • Must be able to lift up to 35 lbs. in connection with the handling of children for the facilitation of programs, child safety, and potential emergency situations. For Infant and Young Toddler teachers, must be able to properly lift infants into and out of a crib., • Infant - Preschool Teachers: 2 year degree in early childhood or related field preferred but NOT required, • Pre-Kindergarten Teachers: 4 year degree in early childhood or related field required Each Primrose school location is a privately owned and operated franchise. All Staff working at these Primrose locations will enjoy the following benefits: • Competitive salaries based on experience, • Discounted tuition for staff children, • Full-time hours every week, • Lower teacher to student ratios, must classes have three full-time teachers, • Dynamic Leadership team that is supportive to staff, • Positive, professional and mature co-workers, • On-site continuing education and professional development, • Opportunities for growth and advancement, • Health insurance available after 90-day probationary period, • Nine paid holidays per year after 90-day probationary period, • Paid time off/ Vacation time begins accruing after one year of service, • Anniversary bonus of $100/year per every year of service, • Weekends off (except Spring Carnival)

Job Description Reports To - Ticketing Director Direct Reports - N/A Status - Regular Full-Time Exempt Location - On site in Downtown Houston, Texas, with flexibility for occasional remote work Schedule - Frequent nights and weekends, plus some holidays OVERVIEW The Ticketing Manager serves as the primary ticketing contact for Zilkha Hall clients, performing all ticketing functions related to Zilkha Hall performances including building and maintaining events in ticketing software, managing inventory, reporting, ensuring excellent patron and client service, and maximizing ticket sales revenue. In addition, the Ticketing Manager helps support ticketing operations for Sarofim Hall and Live at the Founders Club performances. The Ticketing Manager has a strong commitment to working collaboratively in a dynamic team environment. MAJOR FUNCTIONS Zilkha Hall • Serves as primary ticketing contact for clients renting Zilkha Hall for performances, • Maintains close relationships with Hobby Center Arts Partners, • Works on building Zilkha Hall events and subscriptions in ticketing software and placing on-sale, • Maintains events in ticketing software including but not limited to, processing complimentary tickets, building new promo codes/offers, pricing changes, inventory management, and reporting, • Monitors events on a consistent basis to ensure tickets are selling correctly and inventory is properly managed including following release schedule for all holds to ensure maximum revenue, • Maintains strong working relationships with clients/promoters including returning clients while providing high level customer service, • Maintains good relationships with front of house staff and all departments including production, • Works closely with the Ticketing Director and the Ticketing Operations Manager to better understand and implement features of Tessitura software, • Builds and maintains non-event tickets such as parking vouchers and ticketing for special events, • Builds system infrastructure for upcoming seasons, • Maintains organized files pertaining to Zilkha Hall performances to assist Marketing, Programming, Finance, and other departments with repeat client information and ticket sale information, • Maintains detailed knowledge of house scaling for Zilkha Hall, assisting clients with price levels, • Works with Sarofim Hall clients and staff to build and maintain events in ticketing software, process complimentary tickets, build offers, and assist with group sale requests, • Works with Ticketing Director and Ticketing Operations Manager to prepare night of show and weekly settlements, • Serves as occasional primary contact for night of show including settlement, • Prepares and assists with reports to internal staff and external clients, • Supports the Ticketing Director and Ticketing Operations Manager with the development of an effective and efficient staff of Ticket Associates including interviewing, hiring, and training new employees as well as weekly scheduling as necessary, • In conjunction with the Ticketing Director and Ticketing Operations Manager, supports and advises ticket staff with any needs, • Oversees all aspects of Ticketing operations in absence of the Ticketing Director and the Ticketing Operations Manager, • Prepares/assists preparation of instruction manual and how to guides for staff, • Maintains Ticketing Website for Zilkha Hall performances and assists in maintaining Sarofim Hall, Live at Founders Club, and special events information, • Works with Accounting to ensure daily balancing, • Performs ticket selling functions as needed including answering patron phone calls and emails as well as helping in-person sales, • Works with Access Team to assist patrons with accessibility needs, • Assists in pulling, processing, and organizing sponsor tickets, • Assists customers with customer service and ticketing issues that need elevation beyond the Ticket Associates, • Keeps shared ticketing inbox emails organized and easily accessible to answer questions, • Records messages for phone system including holiday venue closing message TRAITS & CHARACTERISTICS • Knowledge of ticketing with proficiency in Tessitura and understanding of Ticketmaster/Archtics, • Ability to provide excellent customer service in high pressure situations, • Detail oriented, • Proficient in Microsoft Office and Google Suite products, • Basic knowledge of HTML, • Ability to work long hours including nights, weekends, and holidays COMPENSATION The Hobby Center offers a competitive compensation and benefits package including medical, dental, and vision insurance, a 403b savings plan with matching employer contributions, and paid time off. The anticipated hiring range for this position is $55,000 - $65,000. ABOUT THE HOBBY CENTER FOR THE PERFORMING ARTS The Hobby Center for the Performing Arts serves as a connector, convenor and incubator for all Houston audiences, artmakers and arts organizations. Opened in 2002, the campus houses two theaters and welcomes over 400,000 audience members annually to a wide range of arts experiences including the Memorial Hermann Broadway at the Hobby Center series. The Hobby Center is also home to a full season of musical theatre produced by Principal Resident Company Theatre Under the Stars, as well as a variety of diverse performances from both Houston-based and touring artists and companies. Education and accessibility initiatives are central to the Hobby Center’s impact in Houston through programs like the ExxonMobil Discovery Series, sensory inclusive performances, tactile tours, talkbacks, specialized audience services, and master classes for artists and students. The ExxonMobil Discovery Series creates access to engaging arts experiences for thousands of Houston-area students each year. All ExxonMobil Discovery Series performances are offered free of charge to schools, including transportation. The Hobby Center for the Performing Arts is an equal opportunity employer dedicated to building an inclusive, diverse, equitable, and accessible workplace.

Job DescriptionBenefits: • 401(k), • Dental insurance, • Free uniforms, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development, • Vision insurance Perks and Benefits: • Discounted childcare, • Health, Vision, Dental, and Life insurance, • 401k, • Paycheck Advance program, • Generous paid time off, • No nights or weekends, • competitive pay, • Teacher Referral Program, • Continued Professional Development, • Opportunity for AdvancementPrimary Responsibilities:, • Is responsible for the overall supervision and daily class functions of a group of children., • Observes all rules and regulations at Primrose School at Crossroads Park and the local, state or national regulatory agencies pertaining to the health, safety and care of children., • Implements the approved lesson plans and daily classroom schedule in accordance with the Primrose Balanced Learning curriculum and programming., • Maintains an attractive, well-kept classroom that encourages children to create, explore and make decisions with confidence., • Provides verbal recognition and acceptance to children while providing clear and consistent expectations for the children's behavior., • Accepts responsibility for maintenance and necessary housekeeping duties of the classroom, common use areas and playgrounds., • Maintains overall professional personal appearance adhering to the guidelines offered in the Primrose School of/at (school name) Employee Handbook, • Assists in other capacities that Director, or designee, determines is necessary. Desired skills and experience:, • Previous teaching or assistant teaching position in a licensed early childhood program preferred, • Knowledge of the social, emotional and creative needs of young children

Job Description Digi Security Systems is an industry leader in the design, installation and support of custom video surveillance, electronic access control, and intrusion detection solutions for public and private partners. We've built our reputation on innovation and reliable service, and we're known as the industry's experts. Position Overview We are seeking an experienced Project Lead Technician to join our operations in the Houston area. Rate of pay is dependent on experience, starting at $31 + /hr. This person will be responsible for leading a team who performs skilled security technician work in the installation, service, troubleshooting, alternation and programming of all security related systems. Project Leads are site supervisors and installation managers, who oversee and plan installation tasks that are completed by Digi technicians. This individual must have a strong background in installing and servicing Access Control, CCTV, and Burglary/Intrusion Alarm Systems and at least five (5) years of experience in the commercial security systems field. Our office space is located in Cypress, with regular travel expected during the week to the College Station area for projects. Main Responsibilities: • Planning: Establish and communicate daily project installation goals with their team and the Project Coordinator. MUST understand and adhere to project timelines and associated hours., • Inventory Management: Receive and track project equipment from the branch Inventory Coordinator., • Installation: Responsible for the professional installation of cabling, access control components, CCTV systems, and motion/intrusion/alarm systems. Lead by example by upholding the highest installation standards in the industry, and is expected to hold their team accountable to professional standards., • Programming: Ensures project systems are programmed to the highest standard and organized to work well for the client., • Leadership: Provide on-the-job training and mentoring on-site to technicians on their team. Ensure all safety requirements are met by their team. Ensure equipment and materials on job sites at partner locations are accounted for and the project site is cleaned and secured each day before closing work., • Communication: Respectfully communicates with all local Partner staff on daily progress and all necessary information. Updates the Project Coordinator daily on the progress for their projects, as well as report project revenue goals and progress to the Project Coordinator., • 30 hours PTO plus 2 weeks vacation accrual rate, • 3 weeks vacation accrual rate after first year of employment, • 7 company-wide paid holidays throughout the year, • On-call and Travel pay bonuses, • 401k plan w/corporate matching structure, • Full health benefits-medical, dental and vision, • Included life insurance, additional available for purchase, • Accident/critical illness insurance available for purchase, • Full set of Hilti tools, • All hand tools and consumables paid for by company, • Required training/licensing paid for by company, • Voluntary professional development opportunities, • Company laptop, company phone, uniforms and gear, • Yearly stipend for steel-toed boots and work pants, • Ability to lift/move equipment and tools weighing up to 50 lbs., • Ability to work from ladders or man lifts at extended heights., • Must be able to differentiate colors., • Must be comfortable standing for long periods of time and complete overhead work for long periods of time. #LI-TW1

Job DescriptionBenefits: • 401(k), • Dental insurance, • Free uniforms, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development, • Vision insurance Perks and Benefits: • Discounted childcare, • Health, Vision, Dental, and Life insurance, • 401k, • Paycheck Advance program, • Generous paid time off, • No nights or weekends, • competitive pay, • Teacher Referral Program, • Continued Professional Development, • Opportunity for AdvancementPrimary Responsibilities:, • Is responsible for the overall supervision and daily class functions of a group of children., • Observes all rules and regulations at Primrose School at Crossroads Park and the local, state or national regulatory agencies pertaining to the health, safety and care of children., • Assesses each child's developmental needs on an ongoing basis. Knowledge of the social, emotional and creative needs of young children, • Plan and implements the approved lesson plans and daily classroom schedule in accordance with the Primrose Balanced Learning curriculum and programming., • Plans with a member of the Leadership Team the parent-teacher conferences and student evaluations., • Maintains an attractive, well-kept classroom that encourages children to create, explore and make decisions with confidence., • Provides verbal recognition and acceptance to children while providing clear and consistent expectations for the children's behavior., • Accepts responsibility for maintenance and necessary housekeeping duties of the classroom, common use areas and playgrounds., • Attends all required staff meetings, workshops and/or school functions., • Maintains overall professional personal appearance adhering to the guidelines offered in the Primrose School of Copperfield Employee Handbook, • Assists in other capacities that Director, or designee, determines is necessary., • Previous teaching position in a licensed early childhood program preferred, • Must be able to lift up to 35 lbs. in connection with the handling of children for the facilitation of programs, child safety, and potential emergency situations. Desired skills and experience:, • Previous teaching position in a licensed early childhood program preferred, • Knowledge of the social, emotional and creative needs of young children, • Must be able to lift up to 35 lbs. in connection with the handling of children for the facilitation of programs, child safety, and potential emergency situations. For Infant and Young Toddler teachers, must be able to properly lift infants into and out of a crib.

Job Description Territory: Must reside within 25 miles of one of the following cities: Houston, TX; Oklahoma City, OK; Ada, OK; Palm Beach/Fort Lauderdale, FL Are you a visionary leader passionate about empowering the next generation and creating systemic change in health education? HealthCorps is seeking a dynamic Director of Programs to join our team. This is a single position that may be based in one of our five southern hub cities: Houston, TX, Oklahoma City, OK, Ada, OK, Palm Beach/Fort Lauderdale, FL. The Director of Programs will oversee a portfolio of sites and provide leadership to regional staff, with the exact region finalized once the strongest candidate is selected. This role is a critical driver of HealthCorps’ mission to expand access to innovative, community-wide wellness programming. Who We Are We're HealthCorps – a national non-profit organization committed to improving lives by addressing health challenges in communities through programming that includes innovative and engaging experiences for teens in education, leadership, and service learning. We empower teens by encouraging them to become change agents within their families, schools and neighborhoods. Our program is grounded in the understanding that limited access to health education can lead to a lifetime of social, emotional and physical challenges. Our values drive the work we do here at HealthCorps; we're mission obsessed, have an entrepreneurial mindset, value that our people are our power, know that teamwork makes the dream work and believe that there is empowerment in influencing change, both within our teams as well as the communities we serve. Where You Fit In We're seeking an experienced, hands-on leader to oversee and support 4-6 Regional Program Managers across multiple cities, driving program excellence, community engagement, and sustainable impact in our school-based wellness programming. You'll be instrumental in building relationships at the district and funder level while ensuring our programs reach their full potential through exceptional team leadership and strategic partnerships. As Director of Programs, you will serve as a catalyst for maximizing impact in existing programs while supporting strategic growth opportunities, working collaboratively with a national team of directors to scale HealthCorps' proven school-based programming model while maintaining local relevance and community connection. What You'll Do Team Leadership & Development • Lead, coach, and support 4-6 Regional Program Managers to achieve ambitious program goals and professional growth objectives through hands-on management and regular oversight, • Provide direct coaching on program implementation, community partnerships, and stakeholder engagement, • Conduct regular site visits to program locations for coaching, feedback, and stakeholder relationship building, • Build and maintain high-level relationships with school districts, funders, community organizations, and key stakeholders, • Support Regional Program Managers in identifying and securing program growth opportunities, • Support funder relationship management, including grant reporting and submission activities, • Collaborate with a national team of directors to develop synchronized systems, resources, and best practices, • Contribute to the development and implementation of standardized program delivery models, • Share regional insights and innovations to inform national program strategy, • Ensure consistent, high-quality program delivery across all Regional sites, • Monitor program outcomes and impact metrics to drive continuous improvement, • Support the development and execution of regional program expansion strategies, • Serve as a key point of contact for regional funders and major community partners, • Support community engagement initiatives and public representation of HealthCorps Qualifications • Education: Bachelor's degree or equivalent experience in a related field, • Experience: 7-10 years of relevant experience in health education, health promotion, or other youth serving organization with 3-5 years of experience leading programs and teams., • Team Management: Proven track record managing multiple direct reports and driving results through others, • Youth Programming: Significant experience in youth development, school-based programming, or education-focused initiatives, • Strategic Leadership: Ability to develop and execute multi-site regional strategies with measurable outcomes, • Team Development: Strong coaching and mentoring skills with experience developing high-performing teams, • Partnership Building: Exceptional relationship management skills with diverse stakeholders including educators, funders, and community leaders, • Grant Management: Experience with funder relations, grant reporting, and funding development activities, • Communication: Outstanding written, verbal, and presentation skills for diverse audiences, • Systems Thinking: Ability to work collaboratively within national frameworks while adapting to local needs, • Problem-Solving: Proven ability to navigate complex challenges in resource-limited environments, • Travel: Approximately 10-15% travel time across the regional territory, • Transportation: Valid driver's license and reliable vehicle for local and regional travel, • Technology: Proficiency with Microsoft Office Suite, data management systems, and virtual collaboration tools, • Physical Demands: Ability to lift up to 15 pounds and work extended hours as needed for events and site visits At HealthCorps, we believe our team members are our greatest asset. That’s why full-time employees enjoy a comprehensive benefits package designed to support your health, financial security, and overall well-being. Our offerings include: • Generous Paid Time Off (PTO) to relax, recharge, and take care of what matters most, • Medical, Dental & Vision Insurance to keep you and your family healthy, • Life Insurance coverage for added peace of mind, • A 401(k) with company match to help you plan for the future Competitive Salary This is a full-time, salaried position and you will be offered a comprehensive benefits package. Yearly compensation for the role ranges from $60,000-$70,000 depending on several factors, including a candidate’s qualifications, skills, competencies, experience and location. While this is currently the solo position in Development, it is performance-driven with room for growth. Remote Oppurtunity with Occasional Travel You will be a remote employee. Preference given to employees that live in one of our hub areas: Houston, TX, Oklahoma City, OK, Ada, OK, Palm Beach/Fort Lauderdale, FL. Position may require some evening hours. Anticipate occasional overnight travel throughout the year. Equity, Belonging & Opportunity at HealthCorps Ensuring a diverse and inclusive workplace where we learn from each other and our communities is core to HealthCorps’ values. We welcome people of different backgrounds, experiences, abilities, and perspectives and are seeking individuals that align with these same core beliefs. We are an equal opportunity employer and aim to provide a sense of belonging for everyone. HealthCorps, Inc.is an Equal Opportunity Employer. HealthCorps provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics, and in compliance with all state and federal law requirements. HealthCorps, Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. HealthCorps, Inc. reserves the right to conduct background investigations and/or reference checks on all its potential employees. Your job offer is contingent upon a clearance of a background investigation and/or reference check. Note: HealthCorps reserves the right to assign additional duties, as needed. All HealthCorps employees are encouraged to be flexible and responsive to changes in scope of duties.

Job Description About Us! Founded in 2002, Raptor has partnered with more than 60,000 schools in 55 different countries, including 5,300+ K-12 US school districts, to provide integrated visitor, volunteer, attendance, dismissal, emergency management, and safeguarding software and services covering the complete spectrum of school and student safety. We are passionate about our mission to protect every child, every school, every day! About the Role The Senior Software Engineer will be a key member of a high-functioning, collaborative, agile team, working closely with our Technical Lead and Architect. The Senior brings deep expertise in multitenant SaaS platforms, distributed architectures, and microservices, with the ability to build modern solutions in .NET 6+ while maintaining and evolving our legacy .NET Framework 4.7.2 monolith. They understand software architecture well enough to design solutions that are powerful enough to solve immediate problems, adaptable to our changing market, and simple enough to maintain for long-term success — while ensuring high-performance RESTful APIs and scalable enterprise-grade software. Responsibilities • Design, develop, and maintain scalable, multitenant SaaS applications using .NET 6+ and microservices-based distributed architectures., • Support, maintain, and modernize legacy .NET Framework 4.7.2 monolithic applications while planning and executing migration strategies., • Build high-performance, secure, and well-documented RESTful APIs and integrations with third-party APIs., • Apply industry-standard architecture patterns, best practices, and clean code principles to ensure maintainability and scalability., • Collaborate with the Technical Lead and Architect to ensure alignment with architectural direction, coding standards, and system design goals., • Work closely in a fully remote, cross-functional Agile team to deliver business-critical software solutions., • Write and maintain unit tests to ensure software quality and reliability., • Own the end-to-end delivery of significant features or projects, including technical design, implementation, and deployment., • Troubleshoot, debug, and optimize application performance in production and staging environments., • Participate in Agile ceremonies (backlog refinement, sprint planning, standups, retrospectives, demos) and act as a technical lead when needed., • Mentor and coach less senior engineers, fostering technical excellence and knowledge sharing across the team., • Contribute to continuous improvement of development processes, tooling, and deployment pipelines., • 10+ years of professional experience in software engineering with strong expertise in C#/.NET and object-oriented programming principles., • Proven experience designing, building, and scaling multitenant SaaS platforms., • Strong hands-on experience with .NET 6+ for new development and .NET Framework 4.7.2 for legacy system maintenance., • Deep knowledge of distributed architectures, microservices, and service-oriented design patterns., • Expert in designing and implementing RESTful APIs that are performant, secure, and maintainable., • Solid experience with SQL databases (query optimization, schema design, stored procedures)., • Experience working in an Agile SaaS development environment with CI/CD pipelines., • Understanding of cloud platforms (Azure or AWS) for deployment, monitoring, and scaling distributed applications., • Familiarity with front-end frameworks such as Vue.js (preferred, not required)., • Strong problem-solving skills with the ability to debug complex distributed systems., • Excellent communication skills and proven ability to work collaboratively in a remote, cross-functional team., • Prior experience mentoring other developers and leading technical initiatives. What's in it for you?, • You join the gold standard in school safety software., • You will join a company where innovation and customer collaboration are part of what drives new product development to help keep kids safe., • You will work with diverse teams made up of some of the best minds in the industry., • You will exposure to strong mentorship and leadership that have supported a long history of career advancement opportunities for our employees., • You will have access to a robust benefits package that includes:, • Remote-first philosophy, • Flexible paid time off, • Paid parental leave, • 11 Paid holidays per year, • Workplace flexibility, • Affordable health coverage (medical, dental, vision), paid 100% for employee only medical, • 401(k) employer contribution to help you plan for the future, • Company paid life insurance, STD, and LTD, • Pet insurance If you are a resident of California, Colorado, New Jersey, New York or Washington, please reach out to for a reasonable estimate of annual base compensation and any eligible incentive compensation. The actual compensation offered to successful candidates for roles may be higher or lower, based on non-discriminatory criteria including but not limited to relevant professional experience, geographic location, knowledge, skills, and abilities. This range will be reviewed on a regular basis. Raptor Technologies is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, veteran status, or any other characteristic protected by applicable federal, state, or local law. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, compensation, training, promotion, transfer, leaves of absence, and termination.