Trabajos part time mechanic en Rochester, New YorkCrear alertas

If you are currently an employee of Herc Rentals, please apply using this link: ___ Founded in 1965, Herc Rentals is one of the leading equipment rental suppliers in North America with 2025 total revenues reaching approximately $4.4 billion. Herc Rentals’ parent company, known as Herc Holdings Inc., listed on the New York Stock Exchange on July 1, 2016, under the symbol “HRI.” Herc Rentals serves customers through approximately 602 locations and has about 9,600 employees in North America as of December 31, 2025. As a Mechanic B, you are an expert technician and will assume an influential role in product knowledge and standards of quality within the branch. Mechanic B’s understand the standard operating procedures at the branch, region, and national level and serve as a mentor to C level mechanics. The primary focus of a Herc Rentals Mechanic B is to utilize their mechanical knowledge to support fleet maintenance operations needed to keep Herc Rentals equipment on the rental “ready line”. This goal can be achieved safely and professionally through an effective preventative and corrective maintenance program. • Maintain a consistent schedule of performing preventative maintenance of all Herc owned fleet at your branch, • Operate and test equipment to ensure it passes Herc Rentals quality and efficiency standards, • Perform routine maintenance and repairs on all Herc fleet equipment and trucks with minimal supervision, • Diagnose internal combustion engines, DC electrical systems, propane systems, hydraulics, and fuel systems, • Perform major repairs to maintain fleet equipment using diagnostic tools, hand tools, and measuring instruments with minimal supervision, • Conduct oil changes, lubrication of equipment, tire replacements, hose repairs, battery replacements and assorted services, • Utilize warranty repairs timeframes to save and mark parts, correct parts and labor on a work order, or contact vendor when necessary, • Enter work orders and complete part ordering via fleet management system, • Recondition and replace assorted parts of the heavy equipment, • Diagnoses problem areas for any significant wear or tear on the equipment, • Maintain work area in a clean and organized manner, • Produce timely and detailed service reports and repair logs, • Assist in training “C” Mechanics while taking direction from the shop lead, • Follow all company’s filed procedures and protocols, • Perform additional duties as assigned, • 2 years of experience in heavy equipment repair, • Ownership of sufficient selection of hand and air/electric tools to complete most repairs and services, • Ability to safely lift up to 50 LBs, • Ability to understand detailed technical schematics, owner manuals, and product warning labels, • Ability to operate and test equipment such as boom lifts, forklifts, compressors, portable and stationary generators, hydraulics, pumps and assorted tools and equipment, • Computer skills to support entering information into systems, • Ability to communicate effectively and efficiently, • Ability to drive/operate multiple types of vehicles and equipment, • Ability to follow up with customers in a timely manner, • Ability to handle assorted tools properly and safely, • Attention to detail, • Must possess solid written and verbal communication skills, • Understanding the importance of time management Req #: 63771 Pay Range: $24hr to $27.50 Please be advised that the actual salary offered for any position is subject to the company's sole discretion and may be influenced by various factors, including but not limited to the candidate's qualifications, experience, location, and overall fit for the role. Herc Rentals values its employees and provides excellent compensation and benefits packages which are not limited to the following. Keeping you healthy Medical, Dental, and Vision Coverage Life and disability insurance Flex spending and health savings accounts Virtual Health Visits 24 Hour Nurse Line Healthy Pregnancy Program Tobacco Cessation Program Weight Loss Program Building Your Financial Future 401(k) plan with company match Employee Stock Purchase Program Life & Work Harmony Paid Time Off (Holidays, Vacations, Sick Days) Paid parental leave. Military leave & support for those in the National Guard and Reserves Employee Assistance Program (EAP) Adoption Assistance Reimbursement Program Tuition Reimbursement Program Auto & Home Insurance Discounts Protecting You & Your Family Company Paid Life Insurance Supplemental Life Insurance Accidental Death & Dismemberment Insurance Company Paid Disability Insurance Supplemental Disability Insurance Group Legal Plan Critical Illness Insurance Accident Insurance Herc does not discriminate in employment based on the basis of race, creed, color, religion, sex, age, disability, national origin, marital status, sexual orientation, citizenship status, political affiliation, parental status, military service, or other non-merit factors. #Appcast

Overview: WHY COOLSYS? At CoolSys, we offer more than just a job—we provide stability, growth, and industry-leading benefits for our employees. No wonder Newsweek named CoolSys one of America’s Greatest Workplaces! As a large company serving diverse customers, we invest in our team with: • Competitive Compensation: $28-46/HR, • Ongoing Education & Training: Access to state-of-the-art facilities and paid online training., • Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match., • Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing., • Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more. Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: · Ability to report to work in a timely manner as scheduled by supervisor. · Repair and overhaul equipment such as compressors, water pumps, air handlers, electrical and mechanical control devises and other similar machinery. · Test malfunctioning systems and components using electrical and/or mechanical skills. · Maintain legible corporate and personal records of work history. · Provide general repair work on refrigeration, heating and ventilation equipment such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors and electric motors. · Provide preventative maintenance activities; diagnose equipment malfunctions and operating efficiency of mechanical equipment. · Perform work on minor construction and remodeling projects including startups of new installations. · Other duties as assigned. Qualifications: · 6 years plus of commercial refrigeration experience required. · Equivalent passing grade, 80% or better, on Tek Skills Level 3 test. · Experience working on refrigeration equipment in convenience stores or supermarkets a strong plus. Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful. · Must have a good driving record and be able to work independently. · Emergency on-call availability is a basic requirement. · Must be able to lift up to 60 lbs. with no assistance and also be able to sit and/or stand for several hours at a time. Join Us: Today, there are 27 different companies that make up the CoolSys family of brands. Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth! Connect with us on ___ and ___. CoolSys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR for driving positions) and drug testing are required for all positions. CoolSys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance. Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

Job Description The Army National Guard uses a wide range of systems that help protect and serve the force, and as a Quartermaster and Chemical Equipment Repairer, you’ll be in charge of making sure those systems keep running at peak performance. As a Quartermaster and Chemical Equipment Repairer, you will support the maintenance of chemical decontamination equipment and quartermaster machinery. In order to perform these functions, you will train to maintain laundry and bath equipment, pumps, engines, burners, filter units, and water purification units. Your skills will contribute to maintaining special purpose equipment, decontamination and protective filter systems, smoke generator systems, and chemical electrical systems. Job Duties • Service internal combustion engine ignition/fuel/cooling/electrical systems • Perform damage assessment and repair Some of the Skills You’ll Learn • Internal combustion engine theory Helpful Skills • Interest in shop mechanics, fixing engines, and machinery Through your training, you will develop the skills and experience to enjoy a civilian career with the marine transportation, commercial fishing, oil exploration, or oil drilling industries. You’ll be able to consider a future as a marine engine mechanic. Earn While You Learn Instead of paying to learn these skills, get paid to train. In the Army National Guard, you will learn these valuable job skills while earning a regular paycheck and qualifying for tuition assistance. After 10 weeks of Basic Training, where you will learn fundamental Soldiering skills, you will attend 12 weeks of Advanced Individual Training (AIT), which will include a combination of hands-on and classroom training where you will learn marine engine maintenance and repair, as well as internal combustion engine theory, and the use and care of hand and power tools. Benefits/Requirements Benefits Paid training A monthly paycheck Montgomery GI Bill Federal and State tuition assistance Retirement benefits for part-time service Low-cost life insurance (up to $400,000 in coverage) 401(k)-type savings plan Student Loan Repayment Program (up to $50,000, for existing loans) Health care benefits available VA home loans Bonuses, if applicable Most non-prior service candidates will earn between $200 and $250 per drill weekend, subject to change Requirements Military enlistment in the Army National Guard Must be at least a junior in high school, or have a high school diploma or a GED certificate Must be between the ages of 17 and 35 Must be able to pass a physical exam and meet legal and moral standards Must meet citizenship requirements (see NATIONALGUARD.com for details) Requires military enlistment. Programs and benefits are subject to change. Ask your Army National Guard recruiter for the most up-to-date information. Actual MOS assignment may depend on MOS availability. Email me jobs like this

About LiDestri Foods LiDestri Foods has grown from our roots as a pasta sauce and salsa manufacturer to become an R&D engine, formulating and producing innovative food products for our national and retailer brand partners. A family-run company based in Rochester, NY, LiDestri employs over 1,000 people across three U.S. locations. We have decades-long partnerships with some of the most respected consumer packaged goods (CPG) companies and the most highly inventive retailer brands. Excellent Pay and Benefits: • Great career-pathing, • Professional development, including unlimited online training courses, • Health insurance with premium contributions, • Dental, vision, HSA, • 100% company paid life insurance and long-term disability, • 401k - with employer match, • Paid time off to include- vacation, sick pay, wellness time off, and 10 holidays, • Company bonuses, • The primary role of the Mechanic/Electrician I is to work as a key maintenance team contributor to support company objectives with respect to maintaining equipment to support production requirements using strong mechanical and electrical aptitude., • Setup, repair, install, maintain machinery equipment including; mechanical, electrical, pneumatic and hydraulic systems, special projects, measuring and calibrating equipment, performing preventive maintenance duties;, • Performs all production equipment setups as required to meet operational needs;, • Supports and completes Preventive and Planned maintenance of mechanical and utilities equipment including but not limited to; cleaning, inspecting, setup, diagnosing, replacement, testing and continuous improvements;, • Assists in the diagnoses of electrical and mechanical malfunctions in machinery and equipment. Inspect visually and listen to machines and equipment to locate causes of malfunction;, • Identifies and reports the need for repairs/major repairs to Maintenance Management;, • Crossover with previous shifts' maintenance and production employees to review the schedule and current runs, identifying what needs repair and plan product changeovers;, • Effectively communicate with other departments in a professional manner at all times to communicate on equipment and repair status;, • Works within the maintenance team to accurately communicate/document events so that others have the most effective information to solve problems;, • Assists with the installation of new equipment and enhancing equipment through continuous improvements and upgrades;, • Some basic fabrication skills and use of tools associated with cutting, welding, grinding, soldering;, • Enhances knowledge and skills of mechanical and electrical systems with on the job training;, • Work closely with Engineering, Maintenance Managers and Master Mechanics on projects, continuous improvement and annual plant shut-down maintenance;, • Completes all tasks while strictly adhering to all required industry guidelines but not limited to; Plant Safety, Food Safety, SQF and all internal/external audits;, • High School Diploma or GED required;, • Basic computer literacy as evidenced by the ability to go online and conduct basic searches on the Internet, check email, create and send with attachments and use basic email features;, • Ability to read, write and interpret documents in English such as safety rules, procedure manuals, operating and maintenance instructions;, • Ability to add, subtract, multiply and divide all units of measure, using whole numbers, common fractions and decimals;, • Ability to solve practical problems and deal with a variety of variables in situations where only limited standardization exists;, • Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form;, • Experience working with manufacturing equipment including 3 phase motors, control wiring, 24VDC, 120VAC, 208/220VAC, 480VAC;, • Experience with Controls for Conveyor Systems, Pneumatics, Hydraulics, Pumps and Valves;, • Knowledge of and ability to comprehend and troubleshoot production machinery (i.e. Fillers, Rinsers, Cappers, Case Packers, Case Formers, Coolers and Pasteurizers);, • Familiarity with Lock-Out Tag-Out Authorized, Hot Work, Confined Space and HECP Training preferred;, • Ability to read and interpret electrical schematics;, • Ability to use a variety of measuring tools and test equipment;, • Ability to work independently, with limited supervision;, • Requires mechanical aptitude;, • Knowledge of Drill Press, Chop Saw, Port-a-Band, Sawzall and other maintenance tools preferred;, • Knowledge or experience with Multi-Meters, Amp Probes, Meger Ohm Meter, Panelview;, • LiDestri experience 2+ years and familiarly with 85% of plant machinery;, • Manlift, Powertools, Hand tools, Panelview Controls, Production Machines, X-Ray Equipment, all types of Photo Eyes, Light Curtains, and Conveyors;, • Kitchen equipment and Pumps, Milling Machine, Lathes and Drill Press;, • Lock-Out Tag-Out Equipment, Gear and HECPS;, • Computer and Printer;, • Ability to climb ladders and use carts;, • Ammeters, ohmmeters, voltmeters, oscilloscopes and motor megger;, • Digital Multimeter and clamp-on AC current reader. Ability to work in a manufacturing environment with exposure to: • Long periods of standing/moving, working around moving mechanical parts/conveyors, • Loud environment, hot/cold, wet/dry conditions, • Lifting/carrying

Job Description As a Light-Wheel Vehicle Mechanic for the Army National Guard you’ll ensure that anything that moves on wheels is ready to hit the road. In this role, you will primarily be responsible for supervising and performing maintenance and recovery operations on wheeled vehicles in the field and in the shop. Your duties will include inspecting, servicing, maintaining, repairing, testing, adjusting, and replacing of systems and components; performing recovery operations, and servicing electrical systems; including wiring harness and charging systems. Job Duties • Maintain wheeled vehicles associated trailers and material handling equipment systems, • Service automotive electrical systems, including wiring harness, and starting and charging systems Helpful Skills • Interest in troubleshooting and repairing mechanical problems, • Interest in automotive engines and how they work Through your training, you will develop the skills and experience to enjoy a civilian career with service stations, auto dealers, farm equipment companies, and state highway agencies. You’ll be able to pursue a career as a mechanic who works on carburetors, transmissions, radiators, construction equipment, or endless track vehicles. Earn While You Learn Instead of paying to learn these skills, get paid to train. In the Army National Guard, you will learn these valuable job skills while earning a regular paycheck and qualifying for tuition assistance. Job training requires 10 weeks of Basic Training, where you'll learn basic Soldiering skills, and 13 weeks of Advanced Individual Training (AIT). Part of this time is spent in the classroom and part in the field. Benefits/Requirements Benefits • Paid training, • A monthly paycheck, • Montgomery GI Bill, • Federal and State tuition assistance, • Retirement benefits for part-time service, • Low-cost life insurance (up to $400,000 in coverage), • 401(k)-type savings plan, • Student Loan Repayment Program (up to $50,000, for existing loans), • Health care benefits available, • VA home loans, • Bonuses, if applicable, • Military enlistment in the Army National Guard, • Must be at least a junior in high school, or have a high school diploma or a GED certificate, • Must be between the ages of 17 and 35, • Must be able to pass a physical exam and meet legal and moral standards, • Must meet citizenship requirements (see NATIONALGUARD.com for details) Requires military enlistment. Programs and benefits are subject to change. Ask your Army National Guard recruiter for the most up-to-date information. Actual MOS assignment may depend on MOS availability. Email me jobs like this

Job Locations US-NY-Rochester ID 2025-5961 Category Service / Technician Type FT Non-Union (FTN) Milton Rents (a division of Milton CAT) is seeking an Equipment Service Technician to perform preventative maintenance on a variety of equipment, and to inspect, diagnose and repair damaged rental equipment to correct working order. Milton Rents offers challenging career opportunities, extensive training and employee development along with an opportunity to grow your career and thrive under our reputation for excellence. Whether you're looking for a steady job with great benefits, or an exciting place to start your career and grow within the organization, Milton CAT can meet your needs! We offer excellent benefits and supply you with the tools you need to maximize your potential. Pay Range: $22.00-$30.80 per hour depending on experience. Benefits include: Paid Time Off + 8 company paid holidays • Medical, Dental and Vision insurance options for Employee and Family, • Disability & Life Insurance Packages, • Competitive Retirement Plan, • Tuition Reimbursement - available to FT employees with 1 year+ of service, • Additional supplemental offerings and discount programs, • Employee Referral Program, • Inspect, service, and repair a wide variety of construction rental equipment to correct working order. Repairs may be done in the shop or in the field. When in the field repairs are required, a company service truck will be provided and used., • Perform rental check-ins, safety checks, and inspections as per company guidelines assuring equipment is Rent Ready, • Diagnose and repair hydraulic systems, electrical systems, drive components, and typical mechanical failures., • Exhibit positive and effective interaction with customers, fellow employees, management and equipment manufacturers., • Uphold safety practices and standards, • Maintain accurate records as it relates to repair orders, parts ordering, and time keeping., • Must be both efficient and thorough with all repairs and rental check-in., • Maintain a clean work area and keep tools in proper working condition., • Maintain and wear all required Personal Protective Equipment (PPE), • Complete and submit all paperwork required by shop management in the requested timeframes., • High-school diploma or GED is required, • Experience as a rental equipment mechanic or a similar role in the repair industry is desired., • Knowledge of safe operation of Construction Rental Equipment., • Good written and verbal communication skills., • Strong Mechanical aptitude and troubleshooting skills; proficient in mechanical systems (transmissions, engines, hydraulics, etc.), • Able to lift 30 lbs regularly, and occasionally up to 80 pounds independently or with assistance., • Must have a valid driver's license and maintain a safe driving record. This job description is not intended to be all-inclusive. Your supervisor may request and assign similar duties. Resumes that are mailed, emailed or hand-delivered to Milton CAT or any employee will not be considered. You must apply online. A background check and drug test are required as part of our pre-employment process. Milton CAT is an equal opportunity employer that values the strength diversity brings to the workplace. We encourage applications from individuals with disabilities, minorities, veterans, and women. Applicants receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, sexual orientation, gender identity, handicap, disability, veteran status, genetic data, or other legally protected status. We base all employment decisions to further this principle of equal employment opportunity. VEVRAA Federal Contractor. EEO/AA employer. Milton CAT is a Drug-Free workplace. Keyword: equipment, diesel, technician, mechanic, aerial lift, boom, heavy equipment, small engine, hydraulic, rental

Full Jobs List Full Exams List.Maintenance Mechanic I, Part-Time.Title: Maintenance Mechanic I, Part-Time.This is a skilled position responsible for efficient and workmanlike performance of a variety of building, installation, maintenance and repair tasks requiring a good knowledge of one or more of

Job DescriptionCompany Description TOMRA North America, is a top International Reverse Vending and Recycling Company. At Tomra transformation is at the heart of everything we do. We transform ideas & technology to create intelligent and pioneering tools to support a sustainable future. TOMRA, an international recycling company is looking to fill the role of Maintenance Mechanic at our Farmington NY facility. $30.00-$35.00/Hr Based on experience Job Description • Perform preventative and corrective maintenance on industrial machinery and buildings to include, but not limited to:, • Conveyors (All types), • Power transmission systems (direct, belt, and chain driven), • Hydraulic balers, • Granulators, • Air compressors and associated systems, • Docks, doors, and dock levelers, • Must be able to repair and/or replace motors, speed reduction/gear boxes, chain drives, rollers, belt lacing and belts utilizing industry standard methods for installation (e.g. alignment and tensioning)., • Make repairs or replacements to air handling systems utilizing blowers of various types., • Must be able to fabricate, repair, and install all types of guarding on material handling equipment at the plant., • Must be able to repair building plumbing systems and their components., • Must be able to fit, install and repair all type of piping and tubing systems, to include black iron, plastic, brass, copper and rubber piping and tubing systems., • Must be able to troubleshoot and replace electric circuits and systems to include but not limited to motors, fuses, circuit breakers, contactors, sensing switches and devices, control wiring, and transformers., • Proficient in reading schematics and drawings., • Must be able to repair and replace failed lighting circuits and components., • Must be able to use chain falls, hoists, forklifts, and tele-handlers to safely rig and move equipment and parts or components for installation or replacement., • Must know how to safely strap and use chains to secure equipment or material for lifting., • Proficient in the safe and appropriate use of electrical test devices.Qualifications, • Minimum 3-5 years of experience in the field of industrial maintenance is required., • Preferred Qualifications, • A.S. Engineering Technology or equivalent or Vocational School training in a related field, • Welding certification, • Prior certifications as an operator of material handling equipment (forklifts, telehandlers, loaders, etc.), • Experience rigging and moving equipment., • Training in electrical safety and/or NFPA 70E, • Experience maintaining and repairing material handling equipment and powered industrial trucks (forklifts and loaders) Additional Information All your information will be kept confidential according to EEO guidelines. • Full benefits package including medical, dental, and vision, • 401k, • Generous Paid Time Off #farmm

Job Description Bus Technician / Mechanic I (3rd Shift - Thursday & Friday Off) Starting Pay: $33.17per hour Top Rate Within 3 Years: $41.48per hour Schedule: Monday, Tuesday, Wednesday, 11:00 pm-7:30 am, Saturday &Sunday, 5:00 pm-2:00 am (Thursday and Friday off) Union Representation: ATU Local 282 At Regional Transit Service (RTS), we keep our community moving. With more than 1,000 employees across 8 counties, we provide safe, reliable, and sustainable transportation for nearly 8 million riders every year. Join our team and be part of one of the nation's best-run transit systems. Why Work With Us • Excellent pay and union security advance to $40.27/hour within 3 years, • Stable, consistent work no flat rate; steady weekly pay, • Training provided stay current with the latest technology, • Tool Allowance provided, • Strong benefits package medical, dental, vision, tool and boot allowance, fitness center, and more, • Maintain, repair, and overhaul RTS buses and fleet vehicles, • Perform inspections, diagnostics, and preventive maintenance, • Replace and adjust parts; complete necessary test drives, • Operate diagnostic equipment (e.g., Cummins InSite, Allison), • Perform welding, brazing, cutting torch work, and operate tow truck as needed, • Report safety concerns and equipment issues to supervisor Education/Experience • Must have own tools, • Must obtain NYS CDL Class B permit with passenger & air brake endorsements prior to start; CDL-B license required within 90 days, • Must obtain CDL Class A permit & towing endorsement (may be after hire); CDL-A required within 90 days of permit, • Must pass post-offer physical The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to stand, walk, use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to sit, climb, or balance and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move up to 20 pounds and occasionally lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee frequently works in outside weather conditions. The employee is occasionally exposed to wet and/or humid conditions, fumes, or airborne particles, toxic or caustic chemicals and vibration. The employee works near moving mechanical parts. The employee is occasionally exposed to risks. The noise level in the work environment is usually moderate to loud. ADDITIONAL INFORMATION Rochester Genesee Regional Transportation Authority (RGRTA) has a zero-tolerance drug and alcohol policy for all employees in accordance with state and federal law. All internal and external applicants will be required to undergo drug testing before employment and will be subject to further drug and/or alcohol testing throughout their employment in accordance with the Department of Transportation (DOT) and the Federal Transit Administration (FTA) regulatory requirements. Rochester Genesee Regional Transportation Authority (RGRTA) is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship and/or immigration status, sex, sexual orientation, gender identity, pregnancy, age, veteran status, disability, genetic information, or any other protected characteristic under applicable federal or state law. RGRTAwill make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. Pursuant to Federal Transit Administration regulations, all applicants for employment in safety-sensitive positions must be given a pre-employment drug test. An applicant may not be assigned safety-sensitive functions unless the individual has a verified negative test result.RTS is required by law to test for various substances, including cocaine, amphetamines, opioids, PCP and marijuana metabolites. Please be advised that marijuana stays in the system for an extended period of time, sometimes more than 30 days, and can cause a positive test result long after use.

Job Description Bus Technician / Mechanic I - (3rd Shift) Starting Pay: $33.17per hour Top Rate Within 3 Years: $41.48per hour AVAILABLE SHIFT:Sunday-Thursday, 11:00 pm-7:30 am (Friday and Saturday off) Union Representation: ATU Local 282 At Regional Transit Service (RTS), we keep our community moving. With more than 1,000 employees across 8 counties, we provide safe, reliable, and sustainable transportation for nearly 8 million riders every year. Join our team and be part of one of the nation's best-run transit systems. Why Work With Us • Excellent pay and union security advance to $40.27/hour within 3 years, • Stable, consistent work no flat rate; steady weekly pay, • Training provided stay current with the latest technology, • Tool Allowance provided, • Strong benefits package medical, dental, vision, tool and boot allowance, fitness center, and more, • Maintain, repair, and overhaul RTS buses and fleet vehicles, • Perform inspections, diagnostics, and preventive maintenance, • Replace and adjust parts; complete necessary test drives, • Operate diagnostic equipment (e.g., Cummins InSite, Allison), • Perform welding, brazing, cutting torch work, and operate tow truck as needed, • Report safety concerns and equipment issues to supervisor Education/Experience • Must have own tools, • Must obtain NYS CDL Class B permit with passenger & air brake endorsements prior to start; CDL-B license required within 90 days, • Must obtain CDL Class A permit & towing endorsement (may be after hire); CDL-A required within 90 days of permit, • Must pass post-offer physical The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to stand, walk, use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to sit, climb, or balance and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move up to 20 pounds and occasionally lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee frequently works in outside weather conditions. The employee is occasionally exposed to wet and/or humid conditions, fumes, or airborne particles, toxic or caustic chemicals and vibration. The employee works near moving mechanical parts. The employee is occasionally exposed to risks. The noise level in the work environment is usually moderate to loud. ADDITIONAL INFORMATION: Rochester Genesee Regional Transportation Authority (RGRTA) has a zero-tolerance drug and alcohol policy for all employees in accordance with state and federal law. All internal and external applicants will be required to undergo drug testing before employment and will be subject to further drug and/or alcohol testing throughout their employment in accordance with the Department of Transportation (DOT) and the Federal Transit Administration (FTA) regulatory requirements. Rochester Genesee Regional Transportation Authority (RGRTA) is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship and/or immigration status, sex, sexual orientation, gender identity, pregnancy, age, veteran status, disability, genetic information, or any other protected characteristic under applicable federal or state law. RGRTAwill make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. Pursuant to Federal Transit Administration regulations, all applicants for employment in safety-sensitive positions must be given a pre-employment drug test. An applicant may not be assigned safety-sensitive functions unless the individual has a verified negative test result.RTS is required by law to test for various substances, including cocaine, amphetamines, opioids, PCP and marijuana metabolites. Please be advised that marijuana stays in the system for an extended period of time, sometimes more than 30 days, and can cause a positive test result long after use.

Job Description Bus Technician / Mechanic I - (Evenings & Weekends) Starting Pay:$ 33.17 per hour Top Rate Within 3 Years:$41.48 per hour AVAILABLE SHIFT:Sunday, Monday, Thursday 3:00 pm 11:30 pm. Friday and Saturday 5:00 pm 2:00 am. With Tuesday and Wednesday OFF Union Representation:ATU Local 282 At Regional Transit Service (RTS), we keep our community moving. With more than 1,000 employees across 8 counties, we provide safe, reliable, and sustainable transportation for nearly 8 million riders every year. Join our team and be part of one of the nation's best-run transit systems. Why Work With Us • Excellent pay and union security advance to $40.27/hour within 3 years, • Stable, consistent work no flat rate; steady weekly pay, • Training provided stay current with the latest technology, • Tool Allowance provided, • Strong benefits package medical, dental, vision, tool and boot allowance, fitness center, and more, • Maintain, repair, and overhaul RTS buses and fleet vehicles, • Perform inspections, diagnostics, and preventive maintenance, • Replace and adjust parts; complete necessary test drives, • Operate diagnostic equipment (e.g., Cummins InSite, Allison), • Perform welding, brazing, cutting torch work, and operate tow truck as needed, • Report safety concerns and equipment issues to supervisor Education/Experience • Must have own tools, • Must obtain NYS CDL Class B permit with passenger & air brake endorsements prior to start; CDL-B license required within 90 days, • Must obtain CDL Class A permit & towing endorsement (may be after hire); CDL-A required within 90 days of permit, • Must pass post-offer physical The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to stand, walk, use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to sit, climb, or balance and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move up to 20 pounds and occasionally lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee frequently works in outside weather conditions. The employee is occasionally exposed to wet and/or humid conditions, fumes, or airborne particles, toxic or caustic chemicals and vibration. The employee works near moving mechanical parts. The employee is occasionally exposed to risks. The noise level in the work environment is usually moderate to loud. ADDITIONAL INFORMATION Rochester Genesee Regional Transportation Authority (RGRTA) has a zero-tolerance drug and alcohol policy for all employees in accordance with state and federal law. All internal and external applicants will be required to undergo drug testing before employment and will be subject to further drug and/or alcohol testing throughout their employment in accordance with the Department of Transportation (DOT) and the Federal Transit Administration (FTA) regulatory requirements. Rochester Genesee Regional Transportation Authority (RGRTA) is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship and/or immigration status, sex, sexual orientation, gender identity, pregnancy, age, veteran status, disability, genetic information, or any other protected characteristic under applicable federal or state law. RGRTAwill make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. Pursuant to Federal Transit Administration regulations, all applicants for employment in safety-sensitive positions must be given a pre-employment drug test. An applicant may not be assigned safety-sensitive functions unless the individual has a verified negative test result.RTS is required by law to test for various substances, including cocaine, amphetamines, opioids, PCP and marijuana metabolites. Please be advised that marijuana stays in the system for an extended period of time, sometimes more than 30 days, and can cause a positive test result long after use.

Job DescriptionJoin Our Team as a Forklift Mechanic/Technician! Are you a skilled mechanic with a knack for problem-solving? At Arnold Industrial Equipment Service Incorporated, located in Rochester, NY, we’re looking for a dedicated Forklift Mechanic/Technician to join our team. If you’re passionate about machinery and want to work in a supportive environment, we’d love to hear from you! What You’ll Do As a Forklift Mechanic/Technician, you’ll play a key role in ensuring our clients’ equipment runs smoothly and efficiently. Your responsibilities will include: • Diagnosing, repairing, and maintaining forklifts and other industrial equipment., • Performing routine maintenance to prevent breakdowns and extend equipment life., • Troubleshooting mechanical, electrical, and hydraulic systems., • Documenting repairs and maintenance tasks accurately., • At least 1 year of experience in forklift or industrial equipment repair., • Strong mechanical and technical skills, with the ability to troubleshoot and solve problems., • Knowledge of hydraulic, electrical, and mechanical systems., • A proactive attitude and a commitment to delivering high-quality work., • Paid Time Off (PTO) to recharge and relax. By applying to this job, you agree to receive periodic text messages from this employer and Homebase about your pending job application. Opt out anytime. Msg & data rates may apply. Powered by Homebase. Free employee scheduling, time clock and hiring tools.

Job Description Lifetime Assistance – Fleet Mechanic Make an Impact. Create Joy. Shape the Future. At Lifetime Assistance, our mission is to foster independence, dignity, and respect for individuals with intellectual and developmental disabilities. Working with us goes beyond just a job—it’s a chance to transform lives, including your own. Position Overview: Job Title: Mechanic Location: Rochester, NY, 14624 Department: Transportation Reports To: Fleet Coordinator Employment Type: Non-Exempt Pay Range: $21.55 - $23.50 per hour Why You Should Work for Lifetime Assistance? • No-Premium Health Insurance: Access comprehensive healthcare without added cost., • Education Support: Tuition assistance, scholarships — 50% off tuition for two courses per semester plus up to $3,000 scholarship per semester — plus micro-credential stipends up to $750 and SUNY partnerships., • Paid Training & Coaching: Receive hands-on onboarding with a Success Coach, immersive learning, e-learning, and ongoing paid training., • Career Growth: Clear pathways to advancement, leadership training, and coaching support., • Work-Life Harmony: Generous paid time off and supportive scheduling., • Perform scheduled maintenance and repairs on agency vehicles., • Complete all required documentation for each repair job., • Develop and follow maintenance schedules based on mileage and time intervals., • Maintain and secure all shop tools and the maintenance facility., • Drive transportation routes as assigned by the Transportation Director or designee., • Minimum of 5 years of experience as an automotive mechanic., • Ability to perform all essential duties satisfactorily., • May require a valid Commercial Driver’s License (CDL)., • Must meet Lifetime Assistance’s Vehicle Operator Requirements., • Strong organizational skills and attention to detail., • Mission-Driven Work: Empowering individuals to live with independence and purpose—here, your work truly matters., • Inclusive & Supportive: A workplace built on respect, dignity, and a shared vision of inclusion. If you’re a compassionate leader ready to take the next step in your human services career, apply today and join us in building lives of independence—one person at a time. Equal Opportunity Employer Lifetime Assistance is proud to be an Equal Employment Opportunity employer. We celebrate diversity and are committed to inclusive hiring practices without regard to race, religion, gender, age, disability, or other protected characteristics. “I am part of something bigger… Being a Lifetime Assistance employee means everything to me.” — Kimberly C, Family Coordinator of Community Services, celebrating her 30th year with us

Job Description We are seeking an experienced and dependable Heavy-Duty Service Technician to join our growing team in Avoca, NY. We are a premier truck repair and fabrication shop for all heavy-duty vehicles. We specialize in trucks, farm equipment, dump trucks, construction equipment, all mechanical and fabrication modifications, and more. This position is located at our facility in Avoca, NY. You must be able to commute to our location or relocate to within 30 miles of Avoca. Responsibilities: • Perform maintenance, diagnostics, and repairs on heavy-duty trucks and equipment., • Troubleshoot mechanical, electrical, and hydraulic issues., • Conduct inspections to ensure safety and compliance standards are met., • Maintain accurate service records and work orders., • Proven experience as a heavy-duty technician or diesel mechanic, • Must be dependable, detail-oriented, and take pride in quality workmanship, • Own tools required, • Valid driver’s license (CDL preferred, but not required), • Ability to work full-time in a fast-paced, team-oriented environmentCompany DescriptionAs a family-owned business, we have years of experience in the industry. We opened our Avoca, NY service shop in 1995, but have been in the industry since 1976. When you work with our team you can expect quality service, great work, and reliability. We know how important it is to you to get your vehicle working right and back on the road, so our team provides fast turn around service to all our customers. What sets us apart from the competition is our quality workmanship and dependable service.As a family-owned business, we have years of experience in the industry. We opened our Avoca, NY service shop in 1995, but have been in the industry since 1976. When you work with our team you can expect quality service, great work, and reliability. We know how important it is to you to get your vehicle working right and back on the road, so our team provides fast turn around service to all our customers. What sets us apart from the competition is our quality workmanship and dependable service.

Job Description -Full and part time positions available. No weekends or holidays. -Established in 1986, with our focus on quality and customer service. We service most foreign & domestic vehicles. -We are seeking a motivated individual with a mechanical aptitude and detail oriented. -Capable of diagnosing and repairing steering, suspension, tires, exhaust, brakes, engine mechanical, routine maintenance, but not limited to. -2+ years of experience as a mechanic and knowledge of shop equipment. -A valid New York State driver`s license. -On going training & ASE certification available. (potential reimbursement) -Room for advancement/growth.

Job DescriptionJob Description: Isaac Heating & Air Conditioning is seeking an experienced Commercial Install Plumbing Mechanic for their Rochester Location. An ideal candidate should have a background in commercial plumbing, demonstrating proficiency in executing repairs and maintenance tasks with meticulous attention to detail. Summary: For over 75 years, Isaac Heating and Air Conditioning has worked diligently to meet the changing heating and air conditioning needs of homeowners and businesses in Upstate and Central New York. Isaac is one of the nation's largest privately held HVAC/R contractors and services over 35,000 clients a year. Creating an enjoyable experience met with anticipation results in an environment where our team, clients, and community can comfortably grow, prosper, succeed, and improve their quality of life. Isaac partners with leading HVAC and plumbing companies throughout the United States, providing the support and resources of a large national company. Responsibilities: • Work with install teams to complete installation of plumbing systems at commercial project sites, • Independently perform installation of commercial plumbing equipment and piping in accordance with company requirements, manufacturer specifications and industry standards, • Maintain extensive knowledge of commercial plumbing equipment and piping, • Layout and properly install underground plumbing systems, • Provide accurate as-built drawings to Project Managers, • Perform and participate in onsite equipment start-ups, • Maintain accountability for condition of company tools onsite, • Maintain constant communication with Project Managers and Field Supervisors to ensure project schedule and client needs are being met, • Perform other duties as assigned by your manager Job Qualifications: • High school diploma or equivalent required, • Minimum of 5 years of experience in plumbing required, • OSHA 10 certification will be required upon hire, • Valid driver’s license / clean driving record Competencies: • Excellent written, verbal, and active listening skills, • Exceptional customer service skills, • Technical knowledge, • Strong organizational skills, • Ability to work individually and as part of a team, • Customer-focused, • Problem-solving skills What can we offer you? • Medical, dental, and vision insurance, • Competitive base pay, • Paid vacation and sick time, • Paid holidays, • 401k retirement plan, • Tool Allowance The starting base range for this position is $30 to $40 per hour based on experience. This is the range of the base pay only, it does not include other components that make up the total compensation package of the position. If offered a position, your total compensation package will be determined by experience, location, skills, and/or education which may result in a total compensation package that falls outside of the provided range. This employer participates in E-Verify to verify the employment eligibility of all new hires. E-Verify is a federal program that compares information from Form I-9 to government records to confirm employment eligibility. Isaac Heating & Air Conditioning (subsidiaries and affiliates) is an Equal Opportunity Employer committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to sex, race, color, age, national origin, religion, physical and mental disability, genetic information, marital status, sexual orientation, gender identity/assignment, citizenship, pregnancy, or maternity, protected veteran status, or any other status prohibited by applicable national, federal, state, or local law.

Job Description Trailer Service Mechanic Brad’s of New York – Rochester, NY Full-Time | $16–$28 per hour + Benefits Brad’s of New York is looking for a dependable Trailer Service Mechanic to join our team in Rochester, NY. This role focuses primarily on trailer maintenance and basic repairs, including tires, brakes, lighting, and general service work. If you enjoy working with your hands, solving mechanical problems, and being part of a reliable service team, this is a great opportunity to build a long-term career. What You’ll Do * Install and repair trailer tires and wheels * Service and replace trailer brake systems * Diagnose and repair trailer lighting and wiring issues * Perform basic trailer maintenance and safety inspections * Replace parts such as hubs, bearings, lights, wiring, and couplers * Use shop tools and equipment safely and efficiently * Ensure trailers meet road safety and compliance standards * Maintain a clean and organized work area What We’re Looking For * Mechanical or hands-on experience (automotive, trailers, equipment, or similar) * Comfortable using hand tools and shop equipment * Ability to troubleshoot basic mechanical or electrical issues * Strong work ethic and reliability * Ability to lift up to 50 lbs and work on your feet throughout the day * Willingness to learn trailer-specific repairs Pay & Benefits * $16–$28 per hour (based on experience) * Health and dental insurance * Paid time off * 401(k) retirement plan * Stable full-time schedule * Opportunity to grow your mechanical skills

Dashing with DoorDash is a great earnings opportunity for anyone looking for part-time, seasonal, flexible, weekend, after-school, temporary, steady delivery gig. Whether you’re looking for a side hustle or a full-time gig, delivering with DoorDash gives you the opportunity to earn extra cash on y

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly. Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary). Delivering with Uber i

Dashing with DoorDash is a great earnings opportunity for anyone looking for part-time, seasonal, flexible, weekend, after-school, temporary, steady delivery gig. Whether you’re looking for a side hustle or a full-time gig, delivering with DoorDash gives you the opportunity to earn extra cash on y

Respond to work orders in a timely manner, ensuring tenant satisfaction. Order and stock necessary parts for repairs and maintenance tasks.

Dashing with DoorDash is a great earnings opportunity for anyone looking for part-time, seasonal, flexible, weekend, after-school, temporary, steady delivery gig. Become a Shopper and deliver grocery, convenience, retail, alcohol and more—DoorDash offers diverse earning opportunities so you can ma

Schulte Companies - - Responsibilities: Oversees the property grounds, public areas and hotel guest rooms; Conducts preventative maintenance to prevent breakdowns in hotel accommodations; Responds to maintenance orders in a timely manner; Fulfills work orders in a timely manner; Completed daily rou

Island Hospitality Management - - Responsibilities: Perform routine and preventative maintenance on resort facilities; Complete minor repairs to rental homes and facilities; Inspect irrigation systems, playgrounds, pool/spa, and recreational amenities; Maintain resort pool(s) and test chemical leve

Howmet Aerospace - 181 McKee Road - Responsibilities: Perform routine preventative maintenance to ensure that machines continue to run smoothly, building systems operate efficiently, and the physical condition of the building does not deteriorate; Visually inspect and test machinery and equipment; T

Nesco Resource - - Responsibilities: Maintain and repair equipment, pumps, and motors; Assist with pipe installations; Assist with electrical installations; Perform routine maintenance; Troubleshoot equipment.

Spectrum - - Responsibilities: Maintain and repair wires providing Spectrum Internet services from hub sites to customer connections; Monitor and report signal leakages and repairs; Provide 24/7 coverage day and night; Work independently outside; Communicate effectively with peers, customers, and s

Nesco Resource - - Responsibilities: Picking, packing, and preparing customer orders.

Aerotek - - Responsibilities: Perform routine and preventative maintenance of compressors, manufacturing equipment, and general building systems; Troubleshoot and repair production and molding equipment; Work closely with machine operators to ensure equipment is producing the correct product qualit

Cintas Corporation - - Responsibilities: Unload soiled products from company trucks; Load clean uniforms, floor mats and additional customer products onto trucks based on routes; Maintain the cleanliness of the work area; Meet or exceed a standard for quantity and quality of products loaded and unl

Home Depot - - Responsibilities: Oversees, maintains, and repairs building support systems in a warehouse environment.Performs maintenance-related functions in support of warehouse operations.

Pierce Road - Responsibilities: Loading and unloading warehouse items; Selecting and sorting inventory; Palletizing and repacking; Auditing and housekeeping; Lift and carry 25-75lbs.

Suburban Propane - - Responsibilities: Install, maintain, troubleshoot and repair fuel systems and appliances; Maintain the service vehicle including inspections and reporting conditions; Provide superior customer service; Bill customers for services rendered and account for funds and inventory; De

Savers Value Village - 980 Ridge Road - Responsibilities: Coordinate daily warehouse operations to ensure efficient stocking and production flow.

Aerotek - - Responsibilities: Prepare units for new tenants.Complete drywall work, including patching, sanding, and finishing.Perform minor carpentry projects and basic electrical repairs.Evaluate and test systems including appliances, plumbing lines, electrical components, and HVAC.Assist with sno

Compass Group - 8 Roberts Lane - Responsibilities: Responds to dispatch calls for machine repairs using company-owned vehicle; Calls on existing customers to determine adequacy of service; listens to and resolves service complaints; Visually inspects and listens to machines to determine causes of ma

National Church Residences - - Responsibilities: Perform routine inspections, preventive maintenance, and necessary repairs; Diagnose and repair HVAC, plumbing, electrical, and mechanical system issues; Maintain interior and exterior common areas, ensuring safety and cleanliness; Complete minor car

Tradesmen International - - Responsibilities: Perform regular inspections and routine maintenance of building systems and equipment; Perform routine inspections and preventive maintenance on plumbing, electrical systems, and other facility equipment to ensure optimal performance and prevent breakdo

Focus Workforce Management - - Responsibilities: Picking, packing, warehousing, and shipping product or merchandise to individual consumers or clients; Maintain excellent attendance; Follow all safety procedures; Communicate effectively; Maintain and assist keeping the facility clean.

Carrols Restaurant Group - - Responsibilities: Prioritize and complete needed repairs as they occur in a timely fashion; Work with the R&M Budget to implement preventive maintenance procedures; Develop a work schedule to minimize the impact on customer service and restaurant operations; Respond to

Johnson Controls - - Responsibilities: Receive service calls from the Service Resource Center and identify equipment problems; Perform service and repairs on sprinkler systems for commercial, industrial, and residential applications; Read and interpret blueprints, submittals, and manuals to diagnos

Carrols Restaurant Group - - Responsibilities: Prioritize and complete needed repairs as they occur; Develop a work schedule to minimize the impact on customer service and restaurant operations; Work with the R&M Budget to implement preventive maintenance procedures as defined by company representa

ALDI - - Responsibilities: Receives inbound or selects outbound incoming stock to fulfill orders from stores; Relocates merchandise throughout the warehouse according to product handling guidelines; Sorts, organizes and loads merchandise for shipment and unloads incoming shipment from trucks/back-h

ALDI - - Responsibilities: Receives (Inbound) or selects (Outbound) incoming stock efficiently to effectively fulfill orders received from stores; Relocates merchandise throughout the warehouse according to product handling guidelines; Sorts, organizes and loads merchandise strategically in prepara