Trabajos part time welder en New York, New YorkCrear alertas

Job Description Role Snapshot Picture your day: you start with a safety huddle, review work orders, and step onto the track to bring railcars back to life. You’ll diagnose issues by sight, touch, and training; rebuild critical car components; and verify every repair against stringent rail industry standards. By the end of your shift, you’ll have logged precise repair notes via an electronic keyboard system and seen the direct impact of your craftsmanship on North America’s freight network. What You’ll Do • Repair, modify, and upgrade freight railcars to spec., • Rebuild key components, including bolsters, side framers, hitch heads, and boxcar doors., • Weld, fabricate, and use a cutting torch (welding up to 30% of your time; hands-on mechanical work approximately 95%)., • Use blueprints and technical specifications to perform mechanical repairs with hand and power tools and precision measuring instruments., • Inspect equipment by visual checks and tactile assessment using your specialized knowledge and training to pinpoint root causes., • Operate a forklift to move, align, and position components accurately., • Measure, cut, and thread pipe; replace air lines using appropriate hand tools., • Assemble subassemblies and major components; function-test to ensure proper operation., • Repair broken parts using hand tools and welding equipment., • Enter repair details and codes via an electronic keyboard system. Also Part of the Job, • Keep the work area orderly and clean., • Set up and operate metalworking tools (e.g., welder or grinder) as needed., • Pitch in on other tasks assigned by your supervisor. Performance & Quality Benchmarks, • Meet established time standards for each task., • Deliver work that meets customer and governing requirements (AAR, FMO, FRA, TTX, etc.)., • Follow all work rules and procedures., • Work safely at all times to protect yourself and your team. Tools & Equipment You’ll Use, • Circular saw., • Air impacts (1/2", 3/4", 1"); air grinders (4", 7", 9"); air or hydraulic portable power pump and ram (regular use)., • Common hand tools (frequent use)., • Cutting torch (frequent cutting); heating torch for bending (regular); side grinder for grinding (regular); hoist for lifting (regular); winch for pulling (regular). Required PPE, • Steel-toe shoes, hard hat, earplugs, safety glasses, welding shield, burning goggles, grinding shield, and proper clothing (long-sleeved shirt and long pants while welding). Physical Demands, • Approximate activity times (vary slightly by location): standing, hearing, and seeing for 8–10 hours; handling for 6 hours; walking, stooping, kneeling, crouching, and fingering for 5 hours; reaching below waist, twisting, and feeling for 2 hours; sitting, climbing, balancing, crawling, reaching overhead, and talking for 1 hour., • Frequent: standing, kneeling, stretching, reaching, gripping tools/objects, bending at the waist., • Regular: walking, crouching, twisting while standing. Occasional: sitting, crawling, twisting while sitting for 1 hour or less., • Lifting railcar parts from 1–80 lbs throughout the day (10–25 lbs frequently; 25–50 lbs regularly; over 50 lbs occasionally)., • Use wrenches up to 10 lbs to tighten bolts (occasionally—up to 4 hours)., • Pulling forces: 10–25 lbs frequently; 25–50 lbs regularly; over 50 lbs occasionally; carry 50–75 lbs. Work Environment, • Outdoors 8–10 hours/day with exposure to heat and cold/humidity; regular work at heights; occasional work near moving machinery., • Frequent exposure to welding/burning fumes, odors, dust, gases, and elevated noise (up to 10 hours/day); regular hot temperatures; occasional cold; occasional driving of automotive equipment; regular exposure to oil/grease and vibration; occasional solitary work., • Hazards include mechanical (tools), electrical (welders), and radiant energy (torches), frequently up to 10 hours/day. Schedule & Training, • 8–10 hour shifts; work hours and rest days may change regularly., • Flexibility to work shifts, nights, weekends, and holidays., • Mandatory 4-week training program after hire. Reporting Line & Pay, • Reports to the line supervisor or work group supervisor., • Starting pay: $28/hour; rate based on Carman/Journeyman status. Qualifications, • Mechanical aptitude and experience., • Welding and cutting skills., • Ability to make sound decisions and reason through repairs; intermediate short-term memory and information gathering; limited planning/scheduling. About TTX TTX Company provides railcars and freight car management services across North America. Our diverse fleet supports intermodal, automotive, paper and forest products, metals, machinery, wind energy, and other markets where flatcars, boxcars, and gondolas are essential. We offer a robust Total Rewards package with Paid Time Off, Health, Dental, and Vision benefits, and a 401(k) with company match. This position participates in Railroad Retirement. Our Team Mission • Deliver reliable, cost-effective, and innovative railcar solutions., • Prioritize an injury-free workplace., • Develop a deep bench of subject matter experts and leaders at every level., • Drive product and process innovation for the railcar industry., • Continuously improve products, processes, and systems using modern design techniques and data analytics, aligned with TTX’s mission. Apply Posting Link: https://ejjc.fa.us6.oraclecloud.com/hcmUI/CandidateExperience/en/sites/CX/job/6545/?utmmedium=jobshare&utmsource=External+Job+Share Preferred Proficiencies • Heavy Equipment Repair, • Mechanical Troubleshooting Skills, • Pneumatics Troubleshooting, • Maintenance and Repair Skills, • Lift Truck Repair & Maintenance, • Diesel & Heavy Equipment Systems, • Equipment Diagnostics & Troubleshooting, • Mechanical Systems & Component Repair, • Equipment Repair & Maintenance, • Automotive Manufacturing Systems, • Automotive Repair & Service Systems, • Aircraft Maintenance Legal TTX Company is an Equal Employment Opportunity Employer. Note Management reserves the right to modify or adjust duties and essential functions at any time based on operational needs. The frequency of essential and marginal functions, use of equipment/tools, physical requirements, and working conditions may vary depending on railcar type, weather, and location-specific restrictions. However, all Maintenance Specialists are expected to perform the same core responsibilities.

Job DescriptionDescription: The Welder sets up and operates welding equipment, reviews drawings, and leads welders to ensure quality production standards are met. Key Responsibilities Not Limited To: • Weld ferrous and non-ferrous materials (MIG/TIG/Stick), • Set up jobs, tools, and materials; fabricate jigs/fixtures as needed, • Lead and train welders on quality and production methods, • Read and interpret blueprints and specifications, • Work independently to complete assignments and meet schedules, • Perform inspections and quality checks, • Communicate job status and support needs to the Shop ForemanRequirements: Skills & Qualifications • Basic math and strong attention to detail, • Knowledge of safety standards, • Willingness to be cross-trained, • Strong organization and communication skills, • Able to stand for extended periods and lift, push, or pull up to 40lbs unassisted, • Works in a typical production environment; must be flexible to work additional hours as needed, • High school diploma, GED, or equivalent experience, • 2–3 years of welding experience in a machine shop (preferred), • 1 year of supervisory or lead experience, • Bilingual in Spanish is a plus --------------------------------------------------------------------------------------------------------------------------- NJ UNION BENEFITS: • Medical, Dental and Vision insurance, • Life Insurance, • Pension, • Paid Time Off, • 12 Company-Paid holidays, • A Solid Wellness Program to support your personal health goals, • Development opportunities Join our team and build a rewarding career where your contributions are valued and your growth is supported. Be a part of a fast-growing, technology-driven manufacturing company — APPLY TODAY! ---------------------------------------------------------------------------------------------------------------------------- We provide equal employment opportunities to all applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic.

Job Description We are seeking a part-time Welding Instructor to work alongside the senior instructor, follow the welding curriculum, and support students in the classroom and welding lab. Schedule: Monday-Thursday 4:30pm to 9:30pm Duties and Responsibilities • Assist with student instruction in both the classroom and welding lab, • Guide and support student learning in a safe, structured environment, • Demonstrate welding, cutting, fitting, and fabrication techniques, • Prepare materials and projects for instruction, • Weld, fabricate, cut, and visually inspect welds on a variety of materials and processes, • Work with mild steel, stainless steel, and aluminum, • Facilitate workshop sessions as needed, • Enforce all shop and lab safety procedures, • Perform other duties as assigned Qualifications • Current welding certification or completion of an AWS program, trade school, 900-hour welder/fabricator program, or equivalent training., • and/or 5-7 years of documented industry experience, • Strong knowledge of welding theory, welding code requirements, and certification standards, • Demonstrated commitment to workplace and lab safety, including the ability to follow and enforce safety protocols, • Ability to work effectively with students of diverse backgrounds, skill levels, and learning needs, • Ability to pass a multi-process welding and cutting evaluation, • Minimum of 5 years of experience in fabrication, fitting, ironwork, welding, CNC, pipe, or related metalworking industries, whether civilian or military, • Comfortable demonstrating and instructing SMAW, GMAW, FCAW, GTAW, plasma cutting, and oxy-fuel cutting in multiple positions, • Minimum of 3G certification or equivalent skill level in at least two welding processes Certifications • Destructive test certification, • OSHA certification, • Torch and fire watch certification, • DOT certification Candidate must pass a practical welding test. The completion of a background check will be required for the selected candidate. Compensation: The hourly pay for this position is $28. Benefits: • New Jersey Sick Leave: Earn 1 hour of sick leave for every 30 hours worked with a maximum of 40 hours of leave per benefit year. (Eligible to use after successful completion of probationary period.), • Employee Assistance Program provides free, confidential, limited counseling services, work-life assistance, legal and financial guidance., • Commuter Benefits: Free parking access is provided on site. An optional Transit Pre-Tax Plan is available which allows employees to use pre-tax dollars to purchase eligible transit expenses., • NJ Defined Contribution Retirement Program provides eligible members with a tax-sheltered, defined contribution retirement benefit, along with life insurance and long-term disability coverage. (Must meet eligibility requirements.)

Job Description About PTS: Trusted, Responsive, and Nationwide Phillips Tank & Structure (PTS) is a growing, team-oriented, nationwide tank construction company with headquarters in Braddock, Pennsylvania, just outside of the City of Pittsburgh. We have over 190 employees and branch offices in Texas, California, Kentucky, and Hawaii. We specialize in designing, engineering, repairing, and constructing above-ground metal storage tanks and related structures, including welded tanks, bolted tanks, and geodesic domes. We have active projects in various industries, such as petroleum, power, chemical, and renewable fuels. At PTS, our commitment to our customers shapes everything we do. We have served companies across an array of industries, handling new tanks, repairs, and modifications. Our collective methodology, industry knowledge, and exhaustive range of abilities permit us to meet one-of-a-kind needs of our customers as they react to industry expectations. We believe in good quality and on-time delivery. We provide an excellent working relationship based on integrity and professionalism. Why Choose PTS? • Positive Work Culture: PTS employees experience a healthy blend of creativity, accountability, motivation, and improvement through team-based interactions with peers and other group members., • Professional Development: PTS is a growing company with many opportunities for advancement. PTS' systems-based approach to training and development helps employees quickly find the path to success in our company., • Intellectual Satisfaction: Being part of a team that executes unique and challenging projects throughout the country and actually builds something is an exciting endeavor. Our Core Principles • Service: The primary expectation for all employees at PTS is to focus on service. We are called to serve our customers as well as our co-workers and suppliers. We endeavor to build a cohesive team of employees who care about the well-being of the group., • Planning and Problem Solving: Planning and problem solving should be utilized to achieve productivity. We will strive every day to be organized and efficient in our approach. We will always look for better ways to achieve results rather than propagating inefficient or inaccurate methods., • Personal Development: Every employee should assist in the development of co-workers just as each employee should pursue their own personal development. Mentor and teammate relationships lay the groundwork for future growth and rewards. We are currently looking to hire a full-time Foreman/Tank Builder Job Duties: • Foreman are responsible for providing site supervision and site-based senior leadership of a PTS construction project. • Acts as point of contact with customer, vendors and subcontractors on site., • Works to maintain Safety, Quality and Productivity., • The Field Foreman is responsible for understanding the contract scope of work and for the identification of field-initiated scope changes (change orders). • Provides leadership regarding Safety on the jobsite. Fosters a Safety Culture within the crew., • Provides leadership regarding Quality on the jobsite. Eliminates “go-backs”, rejected or sloppy work. • Enhances field productivity. Consistently perform projects under budget and on time., • Balances customer satisfaction with profitability of the project. Keeps customers happy yet protects the company regarding scope changes and barrier time. • Provides craft knowledge and experience to the crew. Expertise in several areas of PTS specialty work (welding, structural erection, tank repair, new tank construction, rigging etc.) • Evaluates field employees and identifies those who are candidates for promotion. Provides guidance and training to assist in their development. Communicates the employee evaluation information to Construction Managers and HR. • Assists Construction Managers and HR in recruiting field workers., • Responsible for the care and maintenance of all tooling and equipment, and immediately calling equipment off rent when no longer needed • Utilizes experience and skills to identify opportunities for improvement of company practices and resources. • Represents PTS in a professional, positive light to customers and employees., • Provides a positive contribution to pre-construction planning effort., • Communicates well with the support staff (i.e. Design, Purchasing, PM, Admin), • Knows and understands the estimated manhours and scope on projects prior to job start. Works with PM in tracking progress weekly (Field Labor Reports). • Works with Safety Specialist, Construction Administration and HR to assure that employees assigned to upcoming or ongoing work have received the necessary training and certifications. This may include safety training, DOT, OQ, welder testing, and site-specific requirements. • Completes all necessary paperwork i.e. – daily time sheets, safety and quality audits, customer required paperwork, equipment inspections etc., • Advises Project Management of potential problems, work interferences, and schedule difficulties; assists in resolving such problems, as required. • Provides complete, final, project paperwork to Design Group at end of projects for creating of the Final QC Book. Requirements • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development., • Paid Time Off (accruing immediately), • You’ll be part of a team where YOU matter To Apply: If interested, complete the job application from our website at www.phillipstank.com/careers. We are an Equal Employment Opportunity employer. Powered by JazzHR 9fV7OtpanF

Location: Various Full/Part Time: Full-Time Regular/Temporary: Regular Work Location: Various Hours of Work: Various If you are hired into this position, you must pass the next Civil Service Exam and be hired from the resulting list for this title to obtain permanent civil service status Compensation: Salary Range: The current minimum salary for Structure Maintainer - Group E is $37.16 per hour for a 40-hour week increasing to $43.72 per hour in the sixth year of service. These rates are subject to change. The benefits of this position include, but are not limited to, night and weekend salary differentials, paid holidays, vacation and sick leave, a comprehensive medical plan and a pension plan. Responsibilities: Structure Maintainers Group E, under general supervision, perform plumbing work in MTA New York City Transits subway, surface and elevated structures, including stations, enclosures, tunnel and related buildings. They install, maintain and repair plumbing fixtures in toilets, sink rooms and heating systems; clean, test, dismantle, install and repair pipes, fixtures, vents and hot water heaters; keep records, perform other structural work when necessary, including incidental painting; may serve as a flagger and respond appropriately to signals on the tracks; load, unload and drive vans and trucks; and perform related work. Some of the physical activities performed by Structure Maintainers Group E and environmental conditions experienced are: crouching while working in confined spaces; climbing and descending ladders and stairs; distinguishing colors of lights; making visual and tactile inspections; using hand tools; responding to sounds and warning bells; lifting and carrying heavy tools and equipment; wearing a respirator; and working outdoors in all weather conditions. Special Working Conditions: Structure Maintainers Group E may be required to work various shifts including nights, Saturdays, Sundays and holidays. Education and Experience Requirements: You must meet one of the following requirements: • Graduation from a four-year full-time apprenticeship program in the plumbing trade recognized by the N.Y. State Department of Labor, U.S. Department of Labor, or any state apprenticeship council which is recognized by the U.S. Department of Labor; or, • Four years of full-time journey-level experience (i.e. fully-trained, knowledgeable, proficient and competent) as a plumber in the plumbing trade; or, • Two years of full-time journey-level experience (i.e. fully-trained, knowledgeable, proficient and competent) as a plumber in the plumbing trade, plus completion of one of the following listed below before obtaining your journey-level experience:, • Two years of full-time experience as a helper, apprentice or trainee performing or assisting in the plumbing trade; or, • Graduation from an approved trade school or technical school, with a major course of study in plumbing or a closely related field, totaling 600 hours; or, • Graduation from a vocational high school with a major course of study in plumbing; or, • An Associate degree or a higher degree in plumbing, or a closely related field, from an accredited college or university., • Some examples of acceptable experience include: Pipe Welder, Pipefitter, Master Plumber, Plumbing Installer, Residential Plumber, Service Plumber, • Some examples of unacceptable experience include: Maintenance Technician, Handyman, Porter, Drain and Sewer Cleaner, Contractor, • If you have qualifying part-time experience, it will be credited on a prorated basis., • The vocational high school, technical school, or trade school must be approved by a States Department of Education or a recognized accrediting organization. The college or university must be accredited by regional, national, professional or specialized agencies recognized as accrediting bodies by the U.S. Secretary of Education, and by the Council for Higher Education Accreditation (CHEA). How to Apply: If you meet the License Requirements above, you can submit an online application by clicking on the "APPLY NOW" button from either the CAREERS page or from the JOB DESCRIPTION page. If you have previously applied online for other positions, enter your Username and Password. If it is your first registration, click on the CLICK HERE TO REGISTER hyperlink and enter a User Name and Password; then click on the REGISTER button. Selection Method / Admission Letter: Candidates may be asked to complete an education and experience test paper and also participate in one or more of the following assessments: written, practical skills and/or structured interview. All selected candidates will be subject to a full background investigation that includes employment and education. Discrepancies may lead to dismissal. Applicants must keep their contact information (email, mailing, phone) up to date. The contact information you entered in your online profile with the MTA will be used to contact you. You can update your address and other contact information by logging into your MTA profile or by sending an email to examsuit@nyct.com. Requirements to be Appointed: Driver License Requirement: At the time of appointment, you must possess either: • A Class A or Class B Commercial Driver License (CDL) valid in the State of New York with no restrictions that would preclude the performance of the duties of a Structure Maintainer Group E; or, • A Motor Vehicle Driver License valid in the State of New York and a Learner Permit for a Class B CDL valid in the State of New York with no restrictions that would preclude the performance of the duties of a Structure Maintainer Group E If you qualify under 2 above, your appointment will be subject to the receipt of a Class B CDL valid in the State of New York with no restrictions no later than six months into the probationary period. If you fail to successfully receive the Class B CDL, valid in the State of New York, with no disqualifying restrictions, your employment will be terminated. Commercial Motor Vehicle Driving Experience in the Military or New York National Guard: If you are an active member or former member (discharged in the past year) of the military or New York National Guard and have experience driving a Commercial Motor Vehicle in the military or New York National Guard, you may be eligible for a waiver of the New York State commercial driving skills test through the New York State Department of Motor Vehicles. If you believe that you may be eligible for this waiver, you must apply for the waiver through the New York State Department of Motor Vehicles. Medical Requirement: Medical guidelines have been established for the position of Structure Maintainer Group E. You will be examined to determine whether you can perform the essential functions of the position. Where appropriate, a reasonable accommodation will be provided for a person with a disability to enable him or her to perform the essential functions of the job. Drug Screening Requirement: You must pass a drug screening in order to be appointed, and if appointed, you will be subject to random drug and alcohol tests for the duration of your employment. Additionally, if you have tested positive on a drug or alcohol test or had a refusal to test during pre-employment or while employed by a Federal DOT-regulated employer during the applicable period, you must have completed the Substance Abuse Professional (SAP) evaluation, referral and education/treatment process required by federal law in order to be appointed to this safety-sensitive position. Residency: New York City residency is not required for this position. English Requirement: You must be able to understand and be understood in English to perform the duties and responsibilities of the position. Proof of Identity: Under the Immigration Reform and Control Act of 1986, you must be able to prove your identity and your right to obtain employment in the United States prior to employment with MTA Bus Company. Additional Information Training: You may be required to undergo a formalized training course during your probationary period. Failure to successfully complete the training course may result in termination. Probationary Period: You will be required to complete a probationary period. If you do not successfully complete the probationary period, you may be terminated. Equal Employment Opportunity: MTA is an Equal Opportunity Employer, including veteran status and individuals with disabilities. The MTA encourages qualified applicants from diverse backgrounds and experiences, including military service members, to apply.

Job Description Our client is a ommercial and industrial boiler contractor serving building owners, property managers, hospitals, universities, manufacturers, and process facilities across New Jersey and the greater New York metropolitan area. Our work spans new boiler and boiler room installations, code repairs and alterations to pressure-retaining equipment, burner and controls retrofits, preventive maintenance agreements, emergency service, and efficiency upgrade projects. We are seeking a General Manager to take full operational and financial ownership of the business. This is a true P&L role. You will run service, construction, and shop operations day to day, own the numbers that ownership sees every month, protect and advance our code certifications, and build a durable leadership culture in a trade where skilled labor is scarce and loyalty is earned rather than bought. The right person is equal parts operator, financial thinker, and people leader — comfortable in a boiler room at 2 a.m. and in front of a spreadsheet the next morning. This role exists to professionalize how the business runs without breaking what already works. You will inherit experienced field technicians and long-standing customer relationships. Your job is to raise margin, tighten execution, and modernize systems while keeping the crew intact and the phone answered. Core Responsibilities Profit & Loss Ownership You own the P&L outright — top line, gross margin, overhead, and net. You will be accountable for annual budgeting, monthly forecasting, and the variance conversations that follow when actuals miss plan. • Build and defend the annual operating budget across every revenue line: service labor, preventive maintenance agreements, projects and retrofits, parts and equipment sales, rental, and shop work., • Own gross margin by division and by job. Understand where margin is made and where it leaks — mispriced service calls, unbilled work, warranty rework, unmanaged overtime, change orders never captured., • Manage work-in-progress and percentage-of-completion reporting on project work, including over/under billings, cost-to-complete accuracy, and backlog quality., • Drive cash performance: billing velocity, DSO, retainage recovery, unbilled revenue, and vendor terms., • Approve pricing, quoting standards, labor rates, and markup structures; make the call on which work is worth chasing and which is not. Financial Reporting & Analysis Produce the monthly financial package that ownership relies on to make decisions. This is not accounting support work — you are expected to build the reporting, interpret it, and act on it. • Assemble and present a monthly package including P&L with budget variance, gross margin by revenue line, backlog and WIP schedules, cash flow and aging, and KPI dashboards with commentary on what moved and why., • Build the operating metrics that run the business: technician billable utilization and labor efficiency rates, revenue per technician, first-time fix rate, callback percentage, average service ticket, quote-to-close conversion, PM agreement renewal and attachment rates, and overtime as a percentage of field labor., • Prepare capital request business cases for fleet, tooling, shop capacity, and headcount, with payback and return expectations stated plainly., • Develop customer-facing financial proposals for capital projects — installed cost, projected fuel and efficiency savings, simple payback and lifecycle cost, and applicable utility incentive and rebate capture. Operations, Code Compliance & the R Stamp Program You are the executive owner of our quality and code program. You are not expected to personally perform inspections or weld, but you are expected to understand what our certifications require and to make sure the organization never puts them at risk. • Maintain the integrity of the company’s National Board R Certificate of Authorization: enforce the Quality Control Manual in daily practice, support the designated QC Manager, manage the relationship with our Authorized Inspection Agency, and lead preparation for triennial National Board review and renewal audits., • Ensure repairs and alterations to pressure-retaining items are performed and documented to NBIC (NB-23) requirements, including R-1 and R-2 form execution, proper nameplate and stamping practice, and complete traceability of materials and welder qualifications., • Govern the welding program: ASME Section IX WPS, PQR, and welder performance qualification currency; continuity logs; and NDE coordination with third-party testing partners., • Apply ASME Section I, Section IV, and Section VIII Division 1 requirements appropriately across power boilers, heating boilers, and pressure vessels., • Enforce ASME CSD-1 controls and safety device requirements and NFPA 85 combustion safety practice on automatically fired equipment., • Own field execution across service dispatch, project scheduling, manpower planning, procurement and equipment lead times, subcontractor management, fleet, and shop throughput., • Own safety outcomes and the metrics that follow the company into every bid: TRIR, DART, and Experience Modification Rate. Lockout/tagout, confined space entry for boiler and vessel work, hot work, and respiratory protection are non-negotiable disciplines. Team Leadership & Change Management The technical problems in this business are solvable. The people problems are the hard part, and they are the reason this role exists. We are looking for high emotional intelligence — someone who reads a room, hears what a technician is actually saying under a complaint, and can hold a hard line without humiliating anyone. • Lead a multi-disciplinary team spanning field service technicians, boilermakers and welders, project managers, estimators, dispatch, and administrative staff., • Introduce process, measurement, and accountability into an environment that has historically run on relationships and tribal knowledge — and do it in a sequence the team can absorb. Sequencing and communication matter more than the changes themselves., • Build the succession bench: recruit, develop, and retain technicians in a labor market where the experienced boiler mechanic pool is shrinking and every competitor is fishing in the same pond. Own the apprenticeship and mentoring pipeline., • Set clear performance expectations, run consistent one-on-ones and reviews, coach the willing, and move decisively on the unwilling., • Serve as the escalation point for customer conflict, jobsite disputes, and internal friction — de-escalating without conceding margin. Commercial Growth & Customer Retention • Grow recurring revenue through preventive maintenance agreements and full-coverage service contracts; improve renewal rates and expand scope within existing accounts., • Support estimating and bid strategy on larger installations and retrofits; sit at the table on the accounts that matter., • Position the company on efficiency-driven work — burner and controls upgrades, condensing economizers, boiler plant optimization, fuel conversions, and decarbonization retrofits — where regulatory pressure is generating demand., • Maintain relationships with OEMs, distributors, engineering firms, mechanical contractors, and property management groups. Requirements Required Qualifications • Ten or more years of progressive operations leadership in commercial or industrial boiler, mechanical HVAC, power generation, or process piping contracting, including at least five years with direct P&L accountability., • Demonstrated experience operating inside an R Stamp certified organization — you have lived under a Quality Control Manual, worked alongside an Authorized Inspector, and been through a National Board review., • Working command of ASME Boiler and Pressure Vessel Code and the National Board Inspection Code as they apply to repair, alteration, and new installation., • Track record of improving gross margin and operating income in a service-and-project business, with specific numbers you can speak to., • Proven ability to build financial reporting from operational data and present it credibly to an owner, board, or private equity sponsor., • Experience leading fifteen or more employees across field and office functions, including hiring, development, and performance management., • Fluency with service management and ERP platforms and the discipline to make a team actually use them., • Bachelor’s degree in engineering, construction management, business, or a related field — or an equivalent combination of trade credentials and operating experience., • Valid driver’s license and willingness to be present in the field and at customer sites throughout the NJ/NY territory. Preferred Qualifications • Direct experience managing or holding responsibility for an R Stamp quality program, including manual authorship or revision and audit preparation., • Additional ASME certifications in the organization’s scope, such as S, U, PP, or A stamps, and National Board VR experience., • Prior background as a boiler technician, boilermaker, welder, or field service engineer before moving into management., • Experience with combustion analysis, boiler efficiency testing, stack loss and thermal efficiency measurement, O2 trim, turndown optimization, and heat recovery., • Union contract administration experience in the NJ/NY market., • Formal change management, Lean, or continuous improvement training., • Experience integrating an acquired business or standing up new systems and processes post-acquisition. Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Short Term & Long Term Disability, • Compensation: $100,000 - 150,000 base salary + bonues and car allowance

Job Description About PTS: Trusted, Responsive, and Nationwide Phillips Tank & Structure (PTS) is a growing, team-oriented, nationwide tank construction company with headquarters in Braddock, Pennsylvania, just outside of the City of Pittsburgh. We have over 190 employees and branch offices in Texas, California, Kentucky, and Hawaii. We specialize in designing, engineering, repairing, and constructing above-ground metal storage tanks and related structures, including welded tanks, bolted tanks, and geodesic domes. We have active projects in various industries, such as petroleum, power, chemical, and renewable fuels. At PTS, our commitment to our customers shapes everything we do. We have served companies across an array of industries, handling new tanks, repairs, and modifications. Our collective methodology, industry knowledge, and exhaustive range of abilities permit us to meet one-of-a-kind needs of our customers as they react to industry expectations. We believe in good quality and on-time delivery. We provide an excellent working relationship based on integrity and professionalism. Why Choose PTS? • Positive Work Culture: PTS employees experience a healthy blend of creativity, accountability, motivation, and improvement through team-based interactions with peers and other group members., • Professional Development: PTS is a growing company with many opportunities for advancement. PTS' systems-based approach to training and development helps employees quickly find the path to success in our company., • Intellectual Satisfaction: Being part of a team that executes unique and challenging projects throughout the country and actually builds something is an exciting endeavor. Our Core Principles • Service: The primary expectation for all employees at PTS is to focus on service. We are called to serve our customers as well as our co-workers and suppliers. We endeavor to build a cohesive team of employees who care about the well-being of the group., • Planning and Problem Solving: Planning and problem solving should be utilized to achieve productivity. We will strive every day to be organized and efficient in our approach. We will always look for better ways to achieve results rather than propagating inefficient or inaccurate methods., • Personal Development: Every employee should assist in the development of co-workers just as each employee should pursue their own personal development. Mentor and teammate relationships lay the groundwork for future growth and rewards. We are currently looking to hire a full-time Foreman/Tank Builder Job Duties: • Foreman are responsible for providing site supervision and site-based senior leadership of a PTS construction project. • Acts as point of contact with customer, vendors and subcontractors on site., • Works to maintain Safety, Quality and Productivity., • The Field Foreman is responsible for understanding the contract scope of work and for the identification of field-initiated scope changes (change orders). • Provides leadership regarding Safety on the jobsite. Fosters a Safety Culture within the crew., • Provides leadership regarding Quality on the jobsite. Eliminates “go-backs”, rejected or sloppy work. • Enhances field productivity. Consistently perform projects under budget and on time., • Balances customer satisfaction with profitability of the project. Keeps customers happy yet protects the company regarding scope changes and barrier time. • Provides craft knowledge and experience to the crew. Expertise in several areas of PTS specialty work (welding, structural erection, tank repair, new tank construction, rigging etc.) • Evaluates field employees and identifies those who are candidates for promotion. Provides guidance and training to assist in their development. Communicates the employee evaluation information to Construction Managers and HR. • Assists Construction Managers and HR in recruiting field workers., • Responsible for the care and maintenance of all tooling and equipment, and immediately calling equipment off rent when no longer needed • Utilizes experience and skills to identify opportunities for improvement of company practices and resources. • Represents PTS in a professional, positive light to customers and employees., • Provides a positive contribution to pre-construction planning effort., • Communicates well with the support staff (i.e. Design, Purchasing, PM, Admin), • Knows and understands the estimated manhours and scope on projects prior to job start. Works with PM in tracking progress weekly (Field Labor Reports). • Works with Safety Specialist, Construction Administration and HR to assure that employees assigned to upcoming or ongoing work have received the necessary training and certifications. This may include safety training, DOT, OQ, welder testing, and site-specific requirements. • Completes all necessary paperwork i.e. – daily time sheets, safety and quality audits, customer required paperwork, equipment inspections etc., • Advises Project Management of potential problems, work interferences, and schedule difficulties; assists in resolving such problems, as required. • Provides complete, final, project paperwork to Design Group at end of projects for creating of the Final QC Book. Requirements • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development., • Paid Time Off (accruing immediately), • You’ll be part of a team where YOU matter To Apply: If interested, complete the job application from our website at www.phillipstank.com/careers. We are an Equal Employment Opportunity employer. Powered by JazzHR W4Lutc4VSo

Full-time casual package delivery drivers work eight to ten hours per day and workdays can vary (Monday - Friday) or (Tuesday - Saturday) depending on the business needs. A seasonal job is a great place to start at UPS, and it might even lead to a permanent role that offers even more advantages and

Dashing with DoorDash is a great earnings opportunity for anyone looking for part-time, seasonal, flexible, weekend, after-school, temporary, steady delivery gig. Whether you’re delivering meals, groceries, or retail orders, DoorDash offers diverse earning opportunities so you can maximize your ti

You’ll be part of a collaborative team that works together to keep operations running smoothly.

Dashing with DoorDash is a great earnings opportunity for anyone looking for part-time, seasonal, flexible, weekend, after-school, temporary, steady delivery gig. Whether you’re delivering meals, groceries, or retail orders, DoorDash offers diverse earning opportunities so you can maximize your ti

Dashing with DoorDash is a great earnings opportunity for anyone looking for part-time, seasonal, flexible, weekend, after-school, temporary, steady delivery gig. Whether you’re delivering meals, groceries, or retail orders, DoorDash offers diverse earning opportunities so you can maximize your ti

Dashing with DoorDash is a great earnings opportunity for anyone looking for part-time, seasonal, flexible, weekend, after-school, temporary, steady delivery gig. Whether you’re delivering meals, groceries, or retail orders, DoorDash offers diverse earning opportunities so you can maximize your ti

Dashing with DoorDash is a great earnings opportunity for anyone looking for part-time, seasonal, flexible, weekend, after-school, temporary, steady delivery gig. Whether you’re delivering meals, groceries, or retail orders, DoorDash offers diverse earning opportunities so you can maximize your ti

Dashing with DoorDash is a great earnings opportunity for anyone looking for part-time, seasonal, flexible, weekend, after-school, temporary, steady delivery gig. Whether you’re delivering meals, groceries, or retail orders, DoorDash offers diverse earning opportunities so you can maximize your ti

Access to third party tools to explore individual health insurance options and personalized recommendations based on your needs (Insurance options are provided through thirdparty partners and are not sponsored, endorsed, or paid for by Walmart. Walmart+ members save 10 cents per gallon on fuel at Wa

Dashing with DoorDash is a great earnings opportunity for anyone looking for part-time, seasonal, flexible, weekend, after-school, temporary, steady delivery gig. Whether you’re delivering meals, groceries, or retail orders, DoorDash offers diverse earning opportunities so you can maximize your ti

Access to third party tools to explore individual health insurance options and personalized recommendations based on your needs (Insurance options are provided through thirdparty partners and are not sponsored, endorsed, or paid for by Walmart. Walmart+ members save 10 cents per gallon on fuel at Wa

Access to third party tools to explore individual health insurance options and personalized recommendations based on your needs (Insurance options are provided through thirdparty partners and are not sponsored, endorsed, or paid for by Walmart. Walmart+ members save 10 cents per gallon on fuel at Wa

Access to third party tools to explore individual health insurance options and personalized recommendations based on your needs (Insurance options are provided through thirdparty partners and are not sponsored, endorsed, or paid for by Walmart. Walmart+ members save 10 cents per gallon on fuel at Wa

Dashing with DoorDash is a great earnings opportunity for anyone looking for part-time, seasonal, flexible, weekend, after-school, temporary, steady delivery gig. Whether you’re delivering meals, groceries, or retail orders, DoorDash offers diverse earning opportunities so you can maximize your ti

Dashing with DoorDash is a great earnings opportunity for anyone looking for part-time, seasonal, flexible, weekend, after-school, temporary, steady delivery gig. Whether you’re delivering meals, groceries, or retail orders, DoorDash offers diverse earning opportunities so you can maximize your ti

Access to third party tools to explore individual health insurance options and personalized recommendations based on your needs (Insurance options are provided through thirdparty partners and are not sponsored, endorsed, or paid for by Walmart. Walmart+ members save 10 cents per gallon on fuel at Wa

Dashing with DoorDash is a great earnings opportunity for anyone looking for part-time, seasonal, flexible, weekend, after-school, temporary, steady delivery gig. Whether you’re delivering meals, groceries, or retail orders, DoorDash offers diverse earning opportunities so you can maximize your ti

Access to third party tools to explore individual health insurance options and personalized recommendations based on your needs (Insurance options are provided through thirdparty partners and are not sponsored, endorsed, or paid for by Walmart. Walmart+ members save 10 cents per gallon on fuel at Wa

Dashing with DoorDash is a great earnings opportunity for anyone looking for part-time, seasonal, flexible, weekend, after-school, temporary, steady delivery gig. Whether you’re delivering meals, groceries, or retail orders, DoorDash offers diverse earning opportunities so you can maximize your ti

Hogsalt is seeking a Full Time . This role requires a strong attention to detail and the ability to work independently or as part of a team. Respond to maintenance requests from restaurants in a timely fashion.

Access to third party tools to explore individual health insurance options and personalized recommendations based on your needs (Insurance options are provided through thirdparty partners and are not sponsored, endorsed, or paid for by Walmart. Walmart+ members save 10 cents per gallon on fuel at Wa

About the Company: Capstone is a North American supply chain solutions partner with more than 650 operating locations, 19,000 associates, and 60,000 carriers. Our integrated, end-to-end logistics solutions uniquely position us to help partners reduce warehousing and transportation costs.