Offres parts manager à Fullerton, CaliforniaCreate job alerts

Job Description All American Racers, Inc. Welder/Fabricator Department: Fabrication Job Status: Full Time FLSA Status: Non-Exempt Reports To: Fabrication Manager Job Type: Regular Work Schedule: 6am – 2:30pm. Work Location: Fabrication Department - Santa Ana, CA Additional as required. POSITION SUMMARY The Welder/Fabrication position requires skillful, efficient, quality custom fabrication within demanding scheduled time periods. The candidate must have strong communication & problem-solving skills, be able to read & interpret printed CAD Drawings and be able to accurately measure, cut and detail materials. The candidate must be effective with time management and work area organizational skills. POSITION DUTIES/RESPONSIBILITES • Proficient in various weld processes, GMAW, GTAW., • Experience welding various materials: Steel, Stainless Steel, Aluminum, Titanium., • Ability to read, understand, and work with engineering drawings., • Perform simple mathematics, be familiar with fractional and decimal measurements and effectively use and understand measuring devices., • Be adept at performing Quality Control on finished products, ensuring that they meet specified performance standards and tolerances., • Be detail oriented and have ability to fabricate quality parts/ structures within specified dimensional tolerances., • Ability to work in a fast-paced environment, multitask, and pivot between different projects as necessary., • Ability to work well with others and be a team player., • Be self-motivated, self-starting, and able to meet deadlines with minimal supervision., • Flexible schedule, ability to work overtime as necessary. SKILLS & ABILITIES · Excellent communication skills. · Excellent interpersonal skills. · Excellent organizational skills and attention to detail. · Excellent time management skills with a proven ability to meet deadlines. · Ability to function well in a high-paced and at times stressful environment. Education and Experience Education: High school diploma or equivalent or technical school. Experience: At least 5 years metal fabrication experience Experience in manufacturing Knowledge of aerospace processes PHYSICAL DEMANDS N (Not Applicable) Activity is not applicable to this position. O (Occasionally) Position requires activity up to 33% of the time (0 - 2.5+ hrs/day) F (Frequently) Position requires activity from 33% - 66% of the time (2.5 - 5.5+ hrs/day) C (Constantly) Position requires activity more than 66% of the time (5.5+ hrs/day) Physical Demands: Lift/Carry • 10 lbs or less F, • 11-20 lbs F, • 21-50 lbs F, • 51-100 lbs O, • Over 100 lbs N Push/Pull • 12 lbs or less F, • 13-25 lbs F, • 26-40 lbs F, • 41-100 lbs O Other Physical Requirements · Must be able to lift and carry items weighing up to thirty-five pounds on a repetitive basis. · Must be able to stand, walk, bend, squat, climb, kneel, twist, and work at heights on an intermittent basis for up to twelve (12) hours. · Requires hand manipulation including simple grasping, pushing, and pulling materials. · Must be able to reach and work above and below the shoulder level. · Must be able to work with and around forklifts and hazardous machinery. · Must be able to remain in a stationary position such as working at a desk on a computer for prolonged periods of time. · Visual acuity skill to detect any flaws in the parts being inspected. · Ability to wear Personal Protective Equipment (PPE) - Required Safety Glasses WORK ENVIRONMENT This position requires an on-site presence. The majority of the work is performed on the production floor, requiring standing for long periods of time. This job description is not an exhaustive list of all responsibilities, skills, efforts or working conditions associated with the job. It is intended, however, to be an accurate reflection of those principal job elements essential for making decisions related to job performance, employee development and compensation. As such, the incumbent may perform other duties and responsibilities as required. Company DescriptionApex Space and Defense prides itself on delivering the highest quality, large- and small-scale composite structures for our aerospace, defense, and commercial customers. APEX, Santa Ana, has over 50 years of experience from our roots in auto racing through years of supporting aerospace and defense. The key to our success is largely dependent on our dedicated family of hard-working team members with a can-do attitude. We’re currently searching for a Service Technician to join our ranks and continue our tradition of success.Apex Space and Defense prides itself on delivering the highest quality, large- and small-scale composite structures for our aerospace, defense, and commercial customers. APEX, Santa Ana, has over 50 years of experience from our roots in auto racing through years of supporting aerospace and defense. The key to our success is largely dependent on our dedicated family of hard-working team members with a can-do attitude. We’re currently searching for a Service Technician to join our ranks and continue our tradition of success.

Job DescriptionJob Description: Lexus or Toyota Automotive Service Technician MASTER Automotive Service Technician Top Tier Pay for Top Tier Techs Lexus - the name says it all! Now, Lexus of Westminster, located in Orange County, California, is offering a RARE opportunity for a professional TECHNICIAN to grab the reins of our growing team and lead it to the next level! The right candidate will have a proven track record of performing technical repairs and maintenance, control and have the ability to lead and motivate others to provide their best effort. Are you ready to take your game to the top with the best automotive manufacturer in the world? Here's a quick list of reasons to consider this amazing opportunity: We are a family-owned dealership and not affiliated with a major auto group or a nation of stores. Ownership loyalty and commitment to employees: dealership has several employees that have worked here for over 25 years! Modern service and parts center More technician racks and offices are available to accommodate future growth Massive state-of-the-art waiting area for our customers; one of the top facilities in the Western Region. Well-maintained equipment All the latest software and computer terminals in our shop ASE and Lexus master certified technicians and service consultants Our customers trust our shop so we always have plenty of good tickets year-round Elite of Lexus Award for 25 consecutive years! The only Lexus store in the area that can make this claim Lexus service technicians will be responsible for performing vehicle services, maintenance, and repair work. Experience working on Lexus and Toyota vehicles is a plus. Our team is one of the leading customer satisfaction dealers in the area!! Let Lexus of Westminster take your skills and talent to the next level! Responsibilities: Primary Responsibilities: o Correctly troubleshoot customer concerns using the latest administrative and technical tools provided o Ensure that common courtesy is shown toward all individuals you come into contact with o Keep up to date with technical publications o Make every reasonable effort to ensure safe and honorable vehicle service is delivered as promised the first time o Address all original customer concerns as indicated on the repair order o Inspect every vehicle, ensuring that the vehicle is properly maintained to the highest safety standards o Participate in Lexus or in-house sponsored training programs offered to you o Complete all paperwork completely and correctly and ensure all required shop forms are attached to the RO hard copy o Perform any other duties assigned by the Service Manager, Diagnostic Specialist, or Group Leader Be ready to have fun and enjoy the journey. Lexus of WEstminster - There's no WE without YOU! Job Requirement:Ideal candidates will have: Experience in performing warranty and non-warranty inspections, diagnostic, maintenance, and repair service on Lexus vehicles m Proven track record of achieving or over-achieving goals Outstanding communication skills Professional appearance and work ethic Great attitude and personality Superior customer service skills Ability to read and comprehend technical repair guides Ability to exercise good judgment Valid State drivers license and good driving record Required Education: High school diploma or equivalent Technical or trade school degree preferred ASE achievement for certain work levels may be required Compensation: We offer competitive pay, health, paid vacation, paid holidays, and a professional work environment. Become a member of our winning team that offers growth opportunity, excellent earning potential, and leadership that appreciates your drive, skills, and ability. And, YOU'LL HAVE FUN!! When you join our organization, you'll enjoy comprehensive training, competitive compensation, and unparalleled benefits. Simply put, you'll experience the best that a career in the automotive service industry has to offer. The above statements are intended to describe the general nature and level of the work being performed by people assigned to this work. This is not an exhaustive list of all duties and responsibilities. We reserve the right to amend and change responsibilities to meet business and organizational needs as necessary. We are an Equal Opportunity Employer and a drug-free workplace. It's Time To Make The Most Important Move Of Your Career! Apply Now!

Job DescriptionJob Description: Lexus Automotive Service Technician MASTER Automotive Service Technician Top Tier Pay for Top Tier Techs Lexus - the name says it all! Now, Lexus of Westminster, located in Orange County, California, is offering a RARE opportunity for a professional TECHNICIAN to grab the reins of our growing team and lead it to the next level! The right candidate will have a proven track record of performing technical repairs and maintenance, control and have the ability to lead and motivate others to provide their best effort. Are you ready to take your game to the top with the best automotive manufacturer in the world? Here's a quick list of reasons to consider this amazing opportunity: We are a family-owned dealership and not affiliated with a major auto group or a nation of stores. Ownership loyalty and commitment to employees: dealership has several employees that have worked here for over 25 years! Modern service and parts center More technician racks and offices are available to accommodate future growth Massive state-of-the-art waiting area for our customers; one of the top facilities in the Western Region. Well-maintained equipment All the latest software and computer terminals in our shop ASE and Lexus master certified technicians and service consultants Our customers trust our shop so we always have plenty of good tickets year-round Elite of Lexus Award for 25 consecutive years! The only Lexus store in the area that can make this claim Lexus service technicians will be responsible for performing vehicle services, maintenance, and repair work. Experience working on Lexus and Toyota vehicles is a plus. Our team is one of the leading customer satisfaction dealers in the area!! Let Lexus of Westminster take your skills and talent to the next level! Responsibilities: Primary Responsibilities: o Correctly troubleshoot customer concerns using the latest administrative and technical tools provided o Ensure that common courtesy is shown toward all individuals you come into contact with o Keep up to date with technical publications o Make every reasonable effort to ensure safe and honorable vehicle service is delivered as promised the first time o Address all original customer concerns as indicated on the repair order o Inspect every vehicle, ensuring that the vehicle is properly maintained to the highest safety standards o Participate in Lexus or in-house sponsored training programs offered to you o Complete all paperwork completely and correctly and ensure all required shop forms are attached to the RO hard copy o Perform any other duties assigned by the Service Manager, Diagnostic Specialist, or Group Leader Be ready to have fun and enjoy the journey. Lexus of WEstminster - There's no WE without YOU! Job Requirement:Ideal candidates will have: Experience in performing warranty and non-warranty inspections, diagnostic, maintenance, and repair service on Lexus vehicles m Proven track record of achieving or over-achieving goals Outstanding communication skills Professional appearance and work ethic Great attitude and personality Superior customer service skills Ability to read and comprehend technical repair guides Ability to exercise good judgment Valid State drivers license and good driving record Required Education: High school diploma or equivalent Technical or trade school degree preferred ASE achievement for certain work levels may be required Compensation: We offer competitive pay, health, paid vacation, paid holidays, and a professional work environment. Become a member of our winning team that offers growth opportunity, excellent earning potential, and leadership that appreciates your drive, skills, and ability. And, YOU'LL HAVE FUN!! When you join our organization, you'll enjoy comprehensive training, competitive compensation, and unparalleled benefits. Simply put, you'll experience the best that a career in the automotive service industry has to offer. The above statements are intended to describe the general nature and level of the work being performed by people assigned to this work. This is not an exhaustive list of all duties and responsibilities. We reserve the right to amend and change responsibilities to meet business and organizational needs as necessary. We are an Equal Opportunity Employer and a drug-free workplace. It's Time To Make The Most Important Move Of Your Career! Apply Now!

Job DescriptionCompany Description At Buena Park Honda, a Sonic Automotive family dealership, you'll find the opportunities, resources, and support you need to grow and develop professionally. Our 100+ dealerships are concerned with more than moving inventory; they're committed to your success and invested in your future. So read on, and consider a rewarding career with Sonic Automotive, Inc. Salary: $33 - $38 per flat hour (The Technician Position has a Pay Scale consisting of the following elements and ranges. Wages include Base Hourly Compensation of between $16.00 and $38.00.) Our associates are happy to work here because: • We boast the lowest turnover in the industry., • We provide award-winning training (Training Magazine Top 125, and Brandon Hall Awards)., • We are committed to developing and promoting within the company., • Our benefits are extremely competitive with Medical, dental, vision, HSA, 401k and PTO., • We encourage peer to peer teamwork and recognition., • Special benefits to purchasing and leasing a car. We're proud of what we're doing here. Come and join us! Job Description The Automotive Service Technician is responsible for performing vehicle repair and maintenance work as assigned in accordance with dealer and factory standards. S/he also will oversee the work of any apprentice technician assigned to him/her. Duties and Responsibilities: · Receive repair orders from dispatcher and take to stall area. · Perform work as outlined on repair order with efficiency and accuracy, in accordance with dealership and factory standards. · Diagnose cause of any malfunction and perform repair. · Communicate with parts department to obtain needed parts. · Save and tag parts if the job is under warranty or if requested by the customer. · Examine the vehicle to determine if additional safety or service work is required. · Notify service advisor immediately if additional work outlined is not needed or required. · Notify service advisor immediately if repairs cannot be completed within the time promised. · Document work performed. · Road-test vehicles when required or refer to the test technician, keeping in mind that the customer vehicle should not be used for personal errands. · Supervise work of any apprentice technicians as assigned. · Attend factory-sponsored training classes. · Keep abreast of factory technical bulletins. · Ensure that customers’ cars are kept clean. · Keep shop area neat, clean, and be able to account for all dealership-owned tools at all times. · Understand and follow federal, state and local regulations, such as those governing the disposal of hazardous wastes. · Must follow all company safety policies and procedures, and immediately report any and all accidents to a manager or supervisor. Qualifications · High CSI is a must. · ASE or manufacturing training. · High school diploma or the equivalent. · Valid driver’s license and a good driving record. · Manual dexterity. · Good Judgment. · All applicants must be authorized to work in the USA. · All applicants must perform duties and responsibilities in a safe manner. · All applicants must be able to demonstrate ability to pass pre-employment testing to include background checks, MVR, drug test, and valid driver license. Additional Information It's time to make the most important move of your career. From our cooperative, team-based approach, to our more than 1,000 internal advancements each year, it's easy to see the difference. When you join our organization, you'll enjoy comprehensive training, competitive compensation, and unparalleled benefits. Simply put, you'll experience the best that a career in the automotive industry has to offer. All your information will be kept confidential according to EEOC guidelines

Job Description POSITION SUMMARY: Under the direction of the department Supervisor/Manager, the Helper/Laborer is responsible for putting parts on and off the racks so that they may be prepped and ready for plating process, prepare and package parts, as well as perform general duties within the department. ESSENTIAL DUTIES & RESPONSIBILITIES: • Places parts on and off racks as needed., • Performs bending of aluminum wires on racks to ensure parts are secure and adequately placed., • Tightens bolts and screws with equipment and tools on saddle racks to ensure they are secure., • May assist the Plater in cleaning tanks., • Performs visual inspection of parts to ensure no over plating., • Use air hose to dry parts upon completion of plating cycle., • Prepares and packages parts for shipping., • Adheres to safety regulations., • Performs other duties as assigned. QUALIFICATIONS & REQUIREMENTS: • Comfortable using basic tools (i.e. wire cutters and air hose)., • Comfortable working on a platform with tanks of acid and chemicals., • Ability to pay attention to detail and follow precise instructions. ITAR REQUIREMENT: Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident). PHYSICAL DEMANDS: • Walking/Standing for prolonged periods of time., • Ability to wear a respirator., • Moderate pushing and pulling., • Ability to lift up to 30 lbs., • Exposed heat, noise and chemical fumes while in production areas., • Good hand and eye coordination and movement. We are an Equal Opportunity and Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state or local laws. 2:30PM - 11:00PM

Job Description POSITION SUMMARY: Under the direction of the department Supervisor/Manager, the Helper/Laborer is responsible for putting parts on and off the racks so that they may be prepped and ready for plating process, prepare and package parts, as well as perform general duties within the department. ESSENTIAL DUTIES & RESPONSIBILITIES: • Places parts on and off racks as needed., • Performs bending of aluminum wires on racks to ensure parts are secure and adequately placed., • Tightens bolts and screws with equipment and tools on saddle racks to ensure they are secure., • May assist the Plater in cleaning tanks., • Performs visual inspection of parts to ensure no over plating., • Use air hose to dry parts upon completion of plating cycle., • Prepares and packages parts for shipping., • Adheres to safety regulations., • Performs other duties as assigned. QUALIFICATIONS & REQUIREMENTS: • Comfortable using basic tools (i.e. wire cutters and air hose)., • Comfortable working on a platform with tanks of acid and chemicals., • Ability to pay attention to detail and follow precise instructions. ITAR REQUIREMENT: Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident). PHYSICAL DEMANDS: • Walking/Standing for prolonged periods of time., • Ability to wear a respirator., • Moderate pushing and pulling., • Ability to lift up to 30 lbs., • Exposed heat, noise and chemical fumes while in production areas., • Good hand and eye coordination and movement. We are an Equal Opportunity and Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state or local laws. 6:00AM - 2:30PM

Job DescriptionPOSITION SUMMARY: Under the direction of the department Supervisor/Manager, the Helper/Laborer is responsible for putting parts on and off the racks so that they may be prepped and ready for plating process, prepare and package parts, as well as perform general duties within the department. ESSENTIAL DUTIES & RESPONSIBILITIES: • Removes excess material from parts using a blast cabinet., • Places parts on and off racks as needed., • Performs bending of aluminum wires on racks to ensure parts are secure and adequately placed., • Adheres to safety regulations., • Performs other duties as assigned. QUALIFICATIONS & REQUIREMENTS: • Comfortable using basic tools (i.e. wire cutters and air hose)., • Ability to pay attention to detail and follow precise instructions. ITAR REQUIREMENT: Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident). PHYSICAL DEMANDS: • Walking/Standing for prolonged periods of time., • Ability to wear a respirator., • Moderate pushing and pulling., • Ability to lift up to 25 lbs., • Exposed heat, noise and dust while in production areas., • Good hand and eye coordination and movement. We are an Equal Opportunity and Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state or local laws. 7:00AM - 3:30PM

Job DescriptionSalary Range: $20.00 To 24.00 Hourly Waev Inc. is an electric mobility OEM founded in 2021 to manufacture, distribute, market, and support the GEM, Taylor-Dunn and Tiger brands. GEM was the first commercially-produced, street-legal low-speed vehicle in the United States. GEMs shuttle people and goods across city centers, residential communities, government campuses, colleges and universities, and other micro-environments. Founded in 1949, Taylor-Dunn burden carriers, personnel carriers, and stockchasers have been trusted solutions in a broad range of commercial environments and provide premium reliability, safety features, and all-electric efficiency for industrial grade applications. Tiger heavy-duty tow tractors have been towing cargo, baggage, parcel, and other equipment in ground support applications since 1981. Waev's headquarters and factory are located in Anaheim, California. JOB SUMMARY The Lead Assembler is responsible for both performing and coordinating a wide variety of assembly tasks, including preparing, building, and installing vehicle parts, sub-systems, and components onto custom vehicles. In addition to hands-on assembly, this role provides guidance and support to team members, ensures compliance with established processes, and monitors quality throughout production. The Lead Assembler plays a key role in maintaining safety, efficiency, and exceptional product quality. Essential functions of the role are outlined below and must be performed with or without reasonable accommodations Duties and Responsibilities: • Accurately complete paperwork required for production records., • Perform duties assigned by Supervisor and/or Manager, • Participate in continuous improvement process., • Work overtime as required and mandated by production schedules., • Support and reinforce company policies, procedures, and safety rules., • Maintain regular, reliable attendance., • Other duties as assigned Physical Requirements: • Ability to lift up to 40 lbs and push/pull up to 100 lbs., • Ability to bend, twist, turn, kneel, and squat., • Stand and walk for the duration of assigned shift and reach overhead continuously., • Use air/power/vibrating tools and do strong, pincher gripping., • Work safely around moving equipment, power tools, and industrial vehicles., • Repetitive use of upper extremities. It may be necessary to perform any of these functions up to twelve hours a day. Skills & Knowledge • Basic knowledge of computers., • Basic knowledge of power, air, torque, and manual tools., • Strong communication, problem-solving, and organizational skills. EEO Statement Waev Inc is an Equal Opportunity Employer and will make all employment-related decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, national origin, age, disability, marital status, familial status, status with regard to public assistance, membership or activity in a local commission, protected veteran status, or any other status protected by applicable law.

Job DescriptionDescription: The Quality & Operations Manager works with various internal departments, as well as external customers and vendors to ensure smooth, profitable, quality compliant execution of orders. Responsibilities include but are not limited to: Production Management • Management and oversight of the production process by ensuring efficient and successful movement of open orders throughout the entire process. • Manage staff which provide support to the sales team in production, logistics and inventory management functions. • Act as liaison between all departments including sales, production, accounting, warehousing, & inventory management during open orders process. Manage the transition and flow of materials & information between departments. • Follow best practices and protocols to achieve efficient execution across all production roles., • Manage the production process with live, real-time updates., • Assist in oversight of processing purchase orders, repair orders and payment requests to the accounting department. • Ensure warranties, returns and customer order issues are tracked and actioned appropriately. Operational QA • Oversee and work with the production and sales department to ensure Quality standards are being met, and paperwork and processes are in accordance with the current quality system in place. • Maintain data integrity and compliance for current and future software and file systems., • Review and approve the quality documentation for parts purchased to support SASI open orders. Quality System Management • Oversee all elements of Skytower Aviation Services Inc. Quality Management System in accordance with ASA-100 / FAA-0056 accreditation standards. • Prepare for and manage ASA-100 audits, audit schedules, and action items/corrective actions resulting from ASA- 100 audits and their associated self-audits. • Identify, create and implement quality process improvements. Develop quality training standards, assist in the creation and maintenance of training materials. • Foster an environment in which quality, safety, and compliance is everyone's concern. Inventory Management • Develop and manage the inventory control processes and procedures., • Oversee the execution of periodic inventory audits., • Manage Staff responsible for maintaining inventory, warehouses and facilities.

Job DescriptionYARD ASSOCIATE Pacific States Petroleum, Inc. is an on-site fueling company servicing California and Reno, focusing on delivering products like diesel, unleaded, and propane. It all started in May of 2001 with one fuel truck, a small location in Pleasant Hill, and a big idea. The idea was to deliver smaller than usual quantities of fuel to customer locations while providing unparalleled customer service. Part of the formula to provide meaningful customer service was by giving a voice to our team members, because we believe that nothing resonates better than a team member who is invested in the process. This helps to provide a positive customer experience, where a dedicated team and highly responsive solutions are only a call away. REPORTS TO: YARD MANAGER OR SUPERVISOR KEY RESPONSIBILITIES: • Interacts positively with customers and other employees., • Assists customers with will-call orders which includes loading vehicles and safely securing their load., • Unloads delivered product, equipment and materials. Prior to stocking, reviews vendor packing slip to verify quantity, product accuracy and condition, and turns into receiving. Keeps inventory up to date, safely stored, organized and accurate., • Keeps all yard and warehouse areas clean, neat, safe, and secure to maintains a safe and clean work environment. This includes minimizing safety, theft and security risks., • Prepares and loads products for delivery to customers on boom truck or other company vehicles., • Assembles, cleans, restores and verifies functionality of rental equipment to ensure quality control both when it is to go out to a customer site and when equipment is returned to the yard., • Travels to customer and company sites to repair/troubleshoot company equipment., • Ability to become forklift certified and operate a forklift safely and properly., • Attends safety meetings regularly., • Washing/cleaning trucks as needed, • Repairing and/or replacing serviceable components on trucks. (Example: nozzles/swivels), • Travels to pick up parts, product or any other requested item from Operations or Maintenance., • Maintain inventory of camlocks and seals. Distribute and track as needed, • Light internal office maintenance and repairs as needed., • Performs other duties as assigned by the Yard Manager/Supervisor.Knowledge/Skills, • High School Diploma or equivalent preferred., • 1 year of Customer Service experience required., • Knowledge of safety and OSHA standards., • Reliable and Self Motivated., • Must have a valid drivers license and a clean driving record., • Ability to communicate efficiently and effectively., • Familiarity with app-based programs, • Forklift experience preferred. Ability to take and pass forklift class is required., • Familiarity with power and hand tools, • Frequently lifting 50 pounds; occasionally lifting up to 100 pounds., • Regular exposure to extreme weather, loud noise, dust, gas and fumes., • Ability to climb ladders, • Ability to pass a pre-employment drug test Nvvo7LEVS9

Job Description Overview ABOUT AMERICAN GOLF American Golf is a distinguished leader and pioneer in the golf industry, renowned for its innovative and unparalleled approach to golf course management. With over 50 years of experience as an owner, lessee, and manager of golf courses and country clubs, American Golf has established itself as an authority in maximizing the potential of any golf opportunity. Throughout its rich history, American Golf has been involved with more than 325 golf courses, serving diverse private entities and public agencies with its expertise. Presently, American Golf oversees the management of over 70 premier facilities across the United States, providing exceptional service and experiences to avid golfers and enthusiasts alike. We pride ourselves on our commitment to excellence, continually striving to exceed expectations and set new standards in the golf industry. Our team of skilled professionals is dedicated to delivering exceptional service and maintaining the highest standards of course upkeep, ensuring that each visitor to our facilities has an unparalleled experience. Responsibilities Job Purpose The Greens Keeper is responsible for ensuring the golf course greens, tees, fairways, and roughs are in top condition for daily play. The position requires a high level of attention to detail, physical labor, and a passion for maintaining a pristine playing surface for golfers. Part-Time Weekend availability. $17/Hour DOE Responsibilities • Mow and maintain golf course greens, tees, fairways, and roughs using specialized equipment such as greens mowers, fairway mowers, rough mowers, and trimmers, • Maintain bunkers, including raking and edging sand and repairing damaged areas, • Install and repair irrigation systems as needed, • Monitor and adjust chemical applications for fertilizers, pesticides, and herbicides as directed, • Assist with course set-up for tournaments and events, including flag placement, tee marker placement, and course markings, • Maintain equipment and tools used in daily tasks, • Work collaboratively with other greenskeepers and golf course staff to ensure the course is always ready for play, • Follow all safety guidelines and regulations, including the proper handling and storage of chemicals and equipment Qualifications Qualifications • High school diploma or equivalent, • Prior experience in golf course maintenance preferred, • Knowledge of golf course equipment and machinery, • Ability to lift heavy objects and perform physically demanding tasks in all weather conditions, • Excellent attention to detail and ability to identify and repair problem areas on the course, • Knowledge of safe chemical handling and application techniques, • Good communication and teamwork skills Skills/Abilities/Personal Characteristics • Multitasking, • Time Management, • Organization, • Communication, • Teamwork, • Dexterity, • Thoroughness Working Conditions • Days and hours of work vary by schedule and business needs., • Evening, weekend, and holiday work will be required., • While performing the duties of this job, the employee may be required to stand for long periods of time, to walk, read, hear, talk, balance, climb, use hands, use fingers, reach, stoop, kneel, crouch, crawl, smell, taste, push or pull. The employee may be required to lift and carry objects weighing up to 50 pounds. Specific vision abilities required for this position include close vision, distance vision, peripheral vision, color vision and the ability to adjust focus., • While performing the duties of this job, the employee may be exposed to outside weather conditions, moving mechanical parts, toxic or caustic chemicals, fumes or airborne particles, risk of electrical shock, or sharp objects. The noise level in the work environment is usually moderate., • Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. American Golf Corporation is committed to equal employment opportunities for all. We will not discriminate against employees or applicants for employment on any legally recognized basis, (protected class), including but not limited to race, color, religion, genetic information, national origin, sex, pregnancy, childbirth, medical conditions, age, disability, citizenship status, uniform service member status, or any other protected class under federal, state, and/or local law.

Job DescriptionThe General Helper assists shop personnel with a variety of support tasks that are based on department placement. Under direct supervision the General Helper assists in various shop activities by performing the following duties:Job Summary: • Assist the operators in conducting the shop processes, • Loads & unloads materials, parts, or products onto or from pallets, skids, conveyors, or trucks, • Transport aircraft/aerospace parts to various designated work areas for processing, • Assist operators in conducting the various shop processes, such as, racking parts, washing parts, striping masking, drill work holes in raw stock, and clean the various hardware such as hooks, chains, shackles, placing tooling on parts, • Provide support to shop personnel where needed, • Operate hand tools and handling equipment when instructed, • Read traveler or work instructions necessary to assist in operational process, • Move materials and supplies for department personnel, • Assist with housekeeping and cleanup operations, • Lifts metal part or stock onto machine and secures it on machine table, in chuck, or holding fixture to assist in setting up machine, • Perform light mechanical assembly, • Responsible for the proper handling and management of hazardous waste generated in their work area, • Performs other duties as assignedRequired Skills and Qualifications:, • Ability to read and comprehend simple directions, traveler or work instructions, MSD Sheets, part numbers., • Ability to effectively present information in one-on-one., • Ability to apply common sense understanding to carry out simple one- or two-step instructions., • Ability to deal with standardized situations with only occasional or no variables., • Critical thinking skills and good decision making thought processes., • Understanding and application of directions provided by lead/supervisor/manager., • Adhere to company policies and procedures.Required Experience and Education:, • H.S. Diploma or GEDPay Range: $16.00 - $18.00 (hourly estimate) 2nd Shift will receive 10% shift differential

Job DescriptionThe General Helper assists shop personnel with a variety of support tasks that are based on department placement. Under direct supervision the General Helper assists in various shop activities by performing the following duties.Job Summary: • Assist the operators in conduct the shop processes, • Loads & unloads materials, parts, or products onto or from pallets, skids, conveyors, or trucks, • Transport aircraft/aerospace parts to various designated work areas for processing, • Assist operators in conducting the various shop processes, such as, racking parts, washing parts, striping masking, drill work holes in raw stock, and clean the various hardware such as hooks, chains, shackles, placing tooling on parts, • Provide support to shop personnel where needed, • Operate hand tools and handling equipment when instructed, • Read traveler or work instructions necessary to assist in operational process, • Move materials and supplies for department personnel, • Assist with housekeeping and cleanup operations, • Lifts metal part or stock onto machine and secures it on machine table, in chuck, or holding fixture to assist in setting up machine, • Perform light mechanical assembly, • Responsible for the proper handling and management of hazardous waste generated in their work area, • Performs other duties as assignedRequired Skills and Qualifications:, • Ability to read and comprehend simple directions, traveler or work instructions, MSD Sheets, part numbers., • Ability to effectively present information in one-on-one., • Ability to apply common sense understanding to carry out simple one- or two-step instructions., • Ability to deal with standardized situations with only occasional or no variables., • Critical thinking skills and good decision making thought processes., • Understanding and application of directions provided by lead/supervisor/manager., • Adhere to company policies and procedures.Required Experience and Education:, • H.S. Diploma or GED Pay Range: $16.00 - $18.00 (hourly estimate)

Job Description POSITION SUMMARY: Under the direction of the department Supervisor/Manager, the Helper/Laborer is responsible for putting parts on and off the racks so that they may be prepped and ready for plating process, prepare and package parts, as well as perform general duties within the department. ESSENTIAL DUTIES & RESPONSIBILITIES: • Places parts on and off racks as needed., • Performs bending of aluminum wires on racks to ensure parts are secure and adequately placed., • Tightens bolts and screws with equipment and tools on saddle racks to ensure they are secure., • May assist the Plater in cleaning tanks., • Performs visual inspection of parts to ensure no over plating., • Use air hose to dry parts upon completion of plating cycle., • Prepares and packages parts for shipping., • Adheres to safety regulations., • Performs other duties as assigned. QUALIFICATIONS & REQUIREMENTS: • Comfortable using basic tools (i.e. wire cutters and air hose)., • Comfortable working on a platform with tanks of acid and chemicals., • Ability to pay attention to detail and follow precise instructions. ITAR REQUIREMENT: Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident). PHYSICAL DEMANDS: • Walking/Standing for prolonged periods of time., • Ability to wear a respirator., • Moderate pushing and pulling., • Ability to lift up to 30 lbs., • Exposed heat, noise and chemical fumes while in production areas., • Good hand and eye coordination and movement. We are an Equal Opportunity and Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state or local laws. 6:00AM - 2:30PM

Job DescriptionPOSITION SUMMARY: The primary responsibility of the Certified Non-Destruct Test Technician Level 2 is to test and inspect parts and assemblies for defects using automated and manual methods and techniques including radiography, ultrasound, penetrant, eddy current, laser shearography and magnetic particle. ESSENTIAL DUTIES & RESPONSIBILITIES: Essential functions are the core duties or tasks that the employee will perform. List the duties that are central to performing the most basic functions of the job. • Adherence to safety procedures/guidelines at all times., • Maintain safety precautions at all times., • Keep work area in a clean and orderly condition., • Perform specific inspections and specific evaluations for acceptance or rejection determinations according to written instructions and to record results., • Perform NDT Examinations in conjunction with receipt and in-process inspections on material purchased for use in fabrication., • Familiar with the tools and equipment and shall have demonstrated proficiency in their use., • Capable of determining the calibration status of inspection and measuring equipment is in proper condition for use, and that inspection, examination and test procedures are approved., • Capable of assisting production in the set-up of material and/or components for receipt inspection, as required., • Train other individuals as required by management. PHYSICAL DEMANDS & ABILITIES: • Must demonstrate the ability to read the equivalent of the size and letters of the Jaeger I chart at a minimum distance of 12 inches and distinguish and differentiate the contrasts between colors illustrated on an Ishihara Test Chart., • Inspection personnel shall be able to lift, carry, push, pull or otherwise move objects weighing up to 50 pounds., • May work alone with minimal supervision or with other personnel., • Inspection personnel shall possess fundamental written and verbal communication skills., • Inspection personnel shall be fluent (written and verbal) in the English language., • Computer skills, especially familiarity with MS Office applications, are necessary., • Comfortable working in fast paced team environment. SUPPORTS: Quality Control Manager, Shop Managers, Production Supervisors, Product Line Managers. REQUIRED EDUCATION: Required: High School diploma or equivalent with at least 2 years of inspection related experience. Preferred: 2 years of inspection related experience. MINIMUM AND PREFERRED QUALIFICATIONS: • Must be qualified to be certified as a Level 2 to NAS 410 in one or more of the following NDT Methods that will be utilized:, • Fluorescent Penetrant Inspection (FPI)., • Magnetic Particle Inspection (MPI)., • Certifications MUST be current., • Ability to communicate, read, and understand English., • Ability to read blue prints/drawings, • Ability to follow precise instructions., • Ability to work around hazardous chemicals., • Must have excellent hand/eye coordination., • Ability to work well with others as part of a team., • Able to multi-task and open to working overtime. ITAR REQUIREMENT: Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident). We are an Equal Opportunity and Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state or local laws. 6:00AM - 2:30PM

Job Description POSITION SUMMARY: The primary responsibility of the Certified Non-Destruct Test Technician Level 2 is to test and inspect parts and assemblies for defects using automated and manual methods and techniques including radiography, ultrasound, penetrant, eddy current, laser shearography and magnetic particle. ESSENTIAL DUTIES & RESPONSIBILITIES: Essential functions are the core duties or tasks that the employee will perform. List the duties that are central to performing the most basic functions of the job. • Adherence to safety procedures/guidelines at all times., • Maintain safety precautions at all times., • Keep work area in a clean and orderly condition., • Perform specific inspections and specific evaluations for acceptance or rejection determinations according to written instructions and to record results., • Perform NDT Examinations in conjunction with receipt and in-process inspections on material purchased for use in fabrication., • Familiar with the tools and equipment and shall have demonstrated proficiency in their use., • Capable of determining the calibration status of inspection and measuring equipment is in proper condition for use, and that inspection, examination and test procedures are approved., • Capable of assisting production in the set-up of material and/or components for receipt inspection, as required., • Train other individuals as required by management. PHYSICAL DEMANDS & ABILITIES: • Must demonstrate the ability to read the equivalent of the size and letters of the Jaeger I chart at a minimum distance of 12 inches and distinguish and differentiate the contrasts between colors illustrated on an Ishihara Test Chart., • Inspection personnel shall be able to lift, carry, push, pull or otherwise move objects weighing up to 50 pounds., • May work alone with minimal supervision or with other personnel., • Inspection personnel shall possess fundamental written and verbal communication skills., • Inspection personnel shall be fluent (written and verbal) in the English language., • Computer skills, especially familiarity with MS Office applications, are necessary., • Comfortable working in fast paced team environment. SUPPORTS: Quality Control Manager, Shop Managers, Production Supervisors, Product Line Managers. REQUIRED EDUCATION: Required: High School diploma or equivalent with at least 2 years of inspection related experience. Preferred: 2 years of inspection related experience. MINIMUM AND PREFERRED QUALIFICATIONS: • Must be qualified to be certified as a Level 2 to NAS 410 in one or more of the following NDT Methods that will be utilized:, • Fluorescent Penetrant Inspection (FPI)., • Magnetic Particle Inspection (MPI)., • Certifications MUST be current., • Ability to communicate, read, and understand English., • Ability to read blue prints/drawings, • Ability to follow precise instructions., • Ability to work around hazardous chemicals., • Must have excellent hand/eye coordination., • Ability to work well with others as part of a team., • Able to multi-task and open to working overtime. ITAR REQUIREMENT: Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident). We are an Equal Opportunity and Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state or local laws. 2:30PM - 11:00PM

Job Description Job Title: MECHANICAL INSPECTOR/ CMM Programmer (Machine Shop Inspector) Department: QUALITY Reports To: QUALITY MANAGER FLSA Status: FULL TIME HOURLY $25.00-$40.00 DOE ** Sign on bonus of $1,000 after 6 months of employment and ANOTHER $1,000 after first year completion. Position Summary: Perform precision mechanical inspection and documentation verification of complex machined parts in a fast-paced AS9100 environment. Perform mid and final inspection processes. Must have good understanding of GD&T, shop math, blueprint reading, MS Office, and machining knowledge. You will be expected to interpret customer drawings, specifications and follow Travelers. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. · Must have a demonstrated proficiency with surface plates, height gauges, calipers, micrometers, profilometers and any inspection equipment found within an aerospace machine shop · Blueprint reading ability · Machine shop math knowledge · Perform First Article Inspection in Accordance with AS9102 · Thorough knowledge of GD&T · Report safety concerns to Inspection team or quality Manager · In – process inspect First Articles from machines · Collect Measurement data for FAI reports · Review routers to ensure that upstream operations have been completed and signed off · Collect and provide data required for critical part Final Inspection Reports (IPIRS) · Complete Discrepant Red Tags any forms required for rejected parts · Inspect Incoming and Outgoing materials for compliance, specifications, and conformance requirements. · Perform surface plate and complex setups • CMM Operating, Programming and Romer arm experience Required -PCDMIS Competencies: To perform the job successfully, an individual should demonstrate the following. Communications - Exhibits good listening and comprehension. Expresses ideas and thoughts in written form. Expresses ideas and thoughts verbally. Keeps others adequately informed. Selects and uses appropriate communication methods. Customer Service - Displays courtesy and sensitivity. Manages difficult or emotional customer situations. Meets commitments. Responds promptly to customer needs. Solicits customer feedback to improve service. Dependability - Commits to doing the best job possible. Follows instruction. Keeps commitments. Meets attendance and punctuality guidelines. Responds to requests for service and assistance. Takes responsibility for own actions. Planning & Organization - Integrates changes smoothly. Plans for additional resources. Prioritizes and plans work activities. Sets goals and objectives. Uses time efficiently. Works in an organized manner. Quality - Fosters quality focus in others. Improves processes. Measures key outcomes. Sets clear quality requirements. Solicits and applies customer feedback. Use of Technology - Adapts to new technologies. Demonstrates required skills. Keeps technical skills up to date. Troubleshoots technological problems. Uses technology to increase productivity. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience: High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience.3-5 years in Manufacturing preferred. Repeat or basic CMM operation desired along with Romer arm (PC-Dmis software). Language Ability: Read a limited number of two- and three-syllable words and recognize similarities and differences between words and between series of numbers. Write and speak simple sentences in the English Language. Mathematical Ability: Calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference and volume. Apply concepts of basic algebra and geometry. Reasoning Ability: Apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Deal with problems involving several concrete variables in standardized situations. Computer Skills: Intermediate Certificates and Licenses: None required, above experience needed. Supervisory Responsibilities: None Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. *Must be comfortable working in a Manufacturing environment with loud equipment and various materials. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. *Must be able to lift up to 50 Lbs. Must be able to identify different colors to identity finishing defects. The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor. **Companies governed by ITAR (International Trade and Arms Regulations) reserve the right to background check/and random drug testing for all applicants Powered by JazzHR vEOG1dRlLQ

Job DescriptionPOSITION SUMMARY: The primary responsibility of the Certified Non-Destruct Test Technician Level 2 is to test and inspect parts and assemblies for defects using automated and manual methods and techniques including radiography, ultrasound, penetrant, eddy current, laser shearography and magnetic particle. ESSENTIAL DUTIES & RESPONSIBILITIES: Essential functions are the core duties or tasks that the employee will perform. List the duties that are central to performing the most basic functions of the job. • Adherence to safety procedures/guidelines at all times., • Maintain safety precautions at all times., • Keep work area in a clean and orderly condition., • Perform specific inspections and specific evaluations for acceptance or rejection determinations according to written instructions and to record results., • Perform NDT Examinations in conjunction with receipt and in-process inspections on material purchased for use in fabrication., • Familiar with the tools and equipment and shall have demonstrated proficiency in their use., • Capable of determining the calibration status of inspection and measuring equipment is in proper condition for use, and that inspection, examination and test procedures are approved., • Capable of assisting production in the set-up of material and/or components for receipt inspection, as required., • Train other individuals as required by management. PHYSICAL DEMANDS & ABILITIES: • Must demonstrate the ability to read the equivalent of the size and letters of the Jaeger I chart at a minimum distance of 12 inches and distinguish and differentiate the contrasts between colors illustrated on an Ishihara Test Chart., • Inspection personnel shall be able to lift, carry, push, pull or otherwise move objects weighing up to 50 pounds., • May work alone with minimal supervision or with other personnel., • Inspection personnel shall possess fundamental written and verbal communication skills., • Inspection personnel shall be fluent (written and verbal) in the English language., • Computer skills, especially familiarity with MS Office applications, are necessary., • Comfortable working in fast paced team environment. SUPPORTS: Quality Control Manager, Shop Managers, Production Supervisors, Product Line Managers. REQUIRED EDUCATION: Required: High School diploma or equivalent with at least 2 years of inspection related experience. Preferred: 2 years of inspection related experience. MINIMUM AND PREFERRED QUALIFICATIONS: • Must be qualified to be certified as a Level 2 to NAS 410 in one or more of the following NDT Methods that will be utilized:, • Fluorescent Penetrant Inspection (FPI)., • Magnetic Particle Inspection (MPI)., • Certified Level 2 Magnetic Particle Inspector is a MUST., • Ability to communicate, read, and understand English., • Ability to read blue prints/drawings, • Ability to follow precise instructions., • Ability to work around hazardous chemicals., • Must have excellent hand/eye coordination., • Ability to work well with others as part of a team., • Able to multi-task and open to working overtime. ITAR REQUIREMENT: Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident). We are an Equal Opportunity and Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state or local laws. 7:00AM - 3:30PM

Job DescriptionSalary: $22- $26 Hourly/DOE About AmeriPharma AmeriPharma is a rapidly growing healthcare company where you will have the opportunity to contribute to our joint success on a daily basis. We value new ideas, creativity, and productivity. We like people who are passionate about their roles and people who like to grow and change as the company evolves. AmeriPharmas Benefits • Full benefits package including medical, dental, vision, life that fits your lifestyle and goals, • Great pay and general compensation structures, • Employee assistance program to assist with mental health, legal questions, financial counseling etc., • Comprehensive PTO and sick leave options, • 401k program, • Plenty of opportunities for growth and advancement, • Company sponsored outings and team-building events, • Casual Fridays Job Summary AS an Inventory Technician at AmeriPharma, you will be responsible for assisting with the ambulatory pump maintenance, pump testing, and labeling of pump and IV pole supplies. Pharmacy Technician license, preferred. Position will report to the Pharmacy Production Manager. Schedule Details • In-Person (Orange, Ca.), • Monday-Friday 9:30am-6:00pm Duties and Responsibilities • Inspect pumps and maintenance certificates, • Add pumps to inventory, • Maintain adequate inventory and appropriate storage of pumps, • Label pump and IV pole supplies, • Perform pump testing, • Review, notate in the patient profile, and communicate with PCCs when pump maintenance is due, • Call patients to follow up on pump pickups that have not been returned to the Pharmacy, • Inspect returned pumps for damage or missing parts, • Process Return Goods Authorization (RGA), • Package pumps for return, • Clean IV poles, • Assists in ordering and receiving medication and supplies, • Assist with medication inventory, • Adds medication lot numbers and quantity to inventory, • Reports pumps not returned after three attempts, • Other duties as assigned Required Qualifications • Customer service skills, • Well organized with and strong attention to detail, • Multitasker with the ability to handle multiple projects at once Education Requirements • High School Diploma or equivalent AmeriPharmas Mission Statement Our goal is to achieve superior clinical and economic outcomes while maintaining the utmost compassion and care for our patients. It is our joint and individual responsibility daily to demonstrate to outpatients, prescribers, colleagues, and others that We Care! Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is continuously required to sit and talk or hear. The employee is occasionally required to stand; walk; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; and stoop, kneel, crouch or crawl. The employee must regularly lift and/or move up to 20 pounds and occasionally lift/or move up to 30 pounds. Specific vision abilities required by this job include close vision, peripheral vision, depth perception and the ability to adjust focus. EEO Statement The above statements are intended to describe the work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required. The duties and responsibilities of this position are subject to change and other duties may be assigned or removed at any time. AmeriPharma values diversity in its workforce and is proud to be an AAP/EEO employer.All qualified applicants will receive consideration for employment without regard to race, sex, color, religion, sexual orientation, gender identity, national origin, age, protected veteran status, or based on disability or any other legally protected class.

Job Description We Empower the Fighting Spirit in You! We Offer • Compensation package: Competitive base salary plus bonus., • Comprehensive health benefits: Full coverage for medical, dental, and vision., • Free membership perks: Complimentary access to all our fitness centers., • Employee discounts and special offers: Exclusive deals on fitness products and wellness services., • A fitness-focused workplace vibe: On-site fitness classes, wellness programs, and a supportive community., • Ongoing in-house training: Regular workshops and training sessions., • Conducts a daily safety walk-through of the Facility to identify and address any immediate safety concerns., • Works on special projects as directed by the General Manager and Operations Manager., • Maintains the history file on all equipment., • Procure repair parts, materials, tools, and equipment., • Performs monthly OSHA safety checks as required on the OSHA / PM guidelines., • General knowledge of HVAC and/or electrical equipment, • The ultimate Big Gym experience, UFC GYM raises the bar of what big-box gyms should offer their members.

Job Description NO EXTERNAL RECRUITERS PLEASE No Sponsorship/Transfer Available Company Summary: For over 60 years, MeriCal has been at the forefront of innovation in the dietary supplement industry, delivering custom manufacturing and packaging solutions with passion and precision. With state-of-the-art facilities in Southern California and Ogden, UT, we transform ideas into high-quality products—from research and development to the finished products. Our team, with over 230 years of combined experience, is dedicated to crafting exceptional gummies, probiotics, tablets, capsules, chewables, and powders using clinically backed ingredients. At MeriCal, we don’t just meet expectations—we exceed them, every time. Join us and be part of a dynamic, forward-thinking team shaping the future of nutrition! The Opportunity: As the Maintenance Mechanic Supervisor, you will oversee and support the maintenance team to ensure safe, efficient, and reliable production operations. This role is responsible for supervising and training mechanics, implementing and monitoring the preventative maintenance program, and coordinating with production leaders to minimize downtime and maximize productivity. You’ll manage parts inventory, troubleshoot and resolve equipment issues, enforce safety standards, and maintain a clean, organized shop environment. Reporting directly to the Maintenance Manager, you’ll play a key role in driving efficiency, compliance, and continuous improvement across all maintenance activities. What You’ll Do: • Supervise and delegate all maintenance projects to the mechanics as needed to support production., • Responsible for implementing and monitoring the Preventative Maintenance (PM) program and training subordinates on the correct and efficient method to complete the PM’s., • Responsible for keeping track of parts inventory and maintenance supplies. Alert the DOE for ordering replacement parts to avoid running out of any keep component or part that, • supports production or janitorial supplies., • Will train other mechanics and assist them when needed to maximize efficiencies and minimize down time., • Coordinate with the Manufacturing Manager and Production Supervisors to determine which production lines or other projects are needed necessary to support production activities., • Ensure the Maintenance Shop is kept clean, organized, keeping the safety of all mechanics as a priority one training them on all potential safety hazards as they pertain to machines, welding, cutting, drilling, milling or any other mechanical activity in the Maintenance Shop., • Assists workers in troubleshooting malfunctions on all machinery and equipment in an efficient and effective manner to minimize down time and maximize productivity., • Directs other mechanics on the most efficient way to dismantle and assemble equipment to maximize productivity., • Calculates the time it takes to troubleshoot, repair and re-set up the machine(s) to maximize productivity., • Enforces all safety rules to the mechanics and will report all unsafe acts to the Plant Director for possible disciplinary actions as indicated in the Company Employee Handbook., • Recommends methods of improvements in equipment performance or tooling to maximize quality and minimize down time., • Analyzes and resolves work problems as it pertains to employee issues or solving work related problems., • Follows company policies and enforces same policies among the maintenance team., • Including: safety, SOP’S, GMP’S, attendance, meal breaks and harassment., • The Maintenance Mechanic Supervisor Reports Directly to the Plant Director. What You’ll Bring: • Associate degree (AA) or equivalent from a two-year college, or technical school or 5 years related experience working in a Engineering Mechanical Maintenance Department., • Must understand both electrical and pneumatic schematics and other critical maintenance documentation associated with working in Maintenance., • Must have through working knowledge of all machinery and equipment in the facility., • Must have prior experience working as a Supervisor/Lead directing, motivating, and training maintenance mechanics., • Must have the ability to coordinate, schedule and plan all maintenance activities to all affective departments necessary to support production The Perks: • No-cost vision insurance (yes, you read that right!), employer-paid life insurance, paid company holidays, generous paid time off, sick leave, employee assistance program, and a comprehensive wellness program., • Affordable medical and dental insurance plans are tailored for you and your dependents., • Exceptional supplemental benefits, including Accident, Critical Illness, Hospitalization indemnity plans, and pet insurance., • 401(k) matching plan and more! A reasonable estimate of the current base pay range for this position is $100,000 - $110,000. The compensation offered may vary depending on the candidate’s geographic region, job-related knowledge, skills, and/or education. MeriCal is an equal opportunity employer and is committed to providing a workplace that is inclusive and free of discrimination and harassment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status, or any other characteristic protected by law. We encourage individuals of all backgrounds to apply. We believe in creating a diverse and inclusive workplace where all employees feel valued and respected, and where differences are embraced as strengths. We are dedicated to fostering an environment that promotes equality and celebrates diversity. Qualified applicants with disabilities may be entitled to reasonable accommodation under the terms of the Americans with Disabilities Act and/or certain state or local laws. Please contact if you need an accommodation due to a disability to complete an application, job interview, and/or to otherwise participate in the hiring process. This email does not respond to non-accommodations related requests. MeriCal uses E-Verify to confirm authorization to work in the United States. For more information on E-Verify, please visit the following website: For more information about the categories of personal information we collect from you and how we use, sell, and share that information, please see our Privacy Notice for California Contractors and Privacy Notice for California Employees. 2:00PM-10:30PM

Job Description At Satellite Management Co. we understand that it is our associates who provide the services that our customers rely upon, and who will enable us to create new opportunities in the years to come. Our Beautiful Apartment Community, located in Fullerton & Midway City, is looking for a qualified Maintenance Technician to join our team. Pay Scale: $19.00 - $25.00 per hour Benefits Include: Wellness • Medical – Blue Cross and Kaiser Permanente Offered, Dental, Vision, including Telehealth support, • Company paid Life, AD&D, Short-Term Disability and Long-Term Disability Insurance, • Option of Health Savings Account (HSA), and Flexible Spending Accounts (FSA), • PTO Program (10 days, annual accrual), • 7 Company Paid Holidays, • 401(k) match program 4%, • 401(k) Immediate vesting, • Referral Bonuses, • Professional development and training opportunities, • Cross training opportunities, • Tuition reimbursement for courses related to real estate licensing for selected positions, • Annual performance reviews The Maintenance Technician is responsible for diagnosing maintenance issues, making repairs, and completing maintenance requests in a timely manner. The Maintenance Technician will also be responsible for maintaining the overall condition of the apartment community including the grounds and common areas and to provide a quality living environment for residents. Successful Maintenance Technicians will be customer service focused, possess a sense of urgency, and be responsive to resident and team member needs. Primary Duties and Responsibilities: • Performs maintenance duties including work orders and preventative maintenance activities, with minimal supervision consistent with company policies and procedures and direction from supervisor(s), completes documentation and necessary paperwork in a timely, accurate, and complete manner to document and track maintenance activities, • Ensure that apartments are ready for occupancy by performing various and as needed electrical, HVAC, plumbing, carpentry, and other miscellaneous maintenance and repairs necessary or directed, • Maintenance of grounds, common areas, and amenities by picking up trash and debris, pressure washing breezeways and commons areas, general cleaning as needed and other areas as directed, • Compliance with company standards and applicable laws including but not limited to; Fair Housing, OSHA, Landlord Tenant, Local Building Codes, OSHA, and EEOC. Attend and participate in company safety meetings and required trainings and other safely related laws and requirements, and by reporting accidents and incidents promptly in an accurate manager, • Report known safety hazards, equipment, and customer concerns to supervisor, • Respond quickly to emergency situations during work hours and on-call coverage on site location where living when housing agreement applicable, • Follows established process for inventory of supplies and materials at the community, by tracking inventory used, returning unused inventory, and notifying supervisor about re- ordering needs. Supports cost saving initiatives by fixing rather than replacing parts when possible and not being wasteful with materials and supplies, • Maintains high levels of customer service for prospects, residents, vendors, and associates, • Perform other duties as assigned Skills: • Ability to effectively communicate with residents, vendors, and individuals across the organization, includes ability to communicate effectively in English, • Proficient knowledge of electrical, plumbing, appliance repair, and basic hand/power tools, • Knowledge of environmental hazards including asbestos, lead based paint, moisture intrusion, and radon, • Ability to be “on-call” at work site location where housing agreement applicable when requested and respond promptly to service emergencies, • Basic Computer Skills required to place online orders, respond to emails, take company trainings, access timecards, and access company-wide emails *For On-Site Maintenance Associates: Depending on the size of the property a Maintenance Associate may be required to live on-site as a condition of employment. Housing agreements will be provided with additional information and requirements for on-site employees.

Job DescriptionBenefits: • 401(k), • Employee discounts Primary Duties and Responsibilities: This document is no way states or implies that these are the only duties to be performed by the individual occupying this position. This is a representative list of the general duties, and is not intended to be all-inclusive. The following requirements may change depending on the individual property and may change over time. People Excellence: Exhibit a Heard of Service for the Guests and Team Members with a dedication to great customer service and teamwork. Product Excellence: Repair and Maintain the property as outlined in the Maintenance Standard Operating Procedure (SOP) which includes the following: Complete duties as outlines in the Preventative Maintenance Program Conduct routine maintenance orders as scheduled in PMS system. Complete Maintenance Request Forms Record and keep required maintenance records Maintain swimming pool Perform paint and drywall repair Maintenance and repair common areas Perform routine electrical and plumbing maintenance throughout the property Maintain and make adjustments to the climatic control systems Install and program television sets Keep work shop in order and tool kit inventory in place. Report par stock needs to manager Maintain tools and equipment Notify Management where major repairs are needed Partner with any assigned vendors performing work on the property including Regional Maintenance Guest Excellence: Assist guests with maintenance problems related to their stay at the property in order to create a positive guest experience Partner Excellence: Partner with Clean Team and Welcome Team to ensure a quality product and experience for the guest. May perform duties from other positions as needed or assigned in order to maintain proper operations of the property. Other Duties: Participate in all training and safety meetings. Miscellaneous other tasks as required and assigned by the General Manager or any other member of Management which may include cross functional job duties. All Team Members are expected to always act in a safe manner and report any unsafe conditions to your supervisor immediately. MINIMUM QUALIFICATIONS AND REQUIREMENTS Basic reading and writing skills Basic communication skills Able to pass a property maintenance assessment Prior experience with property maintenance, preferably in the hospitality environment Ability to work with minimal supervision and follow written and verbal work instructions Working safely is a condition of employment. Safety is everyones responsibility. New hires must meet all Motel 6 employment qualifications in place of time of hiring ESSENTIAL FUNCTIONS: The individual occupying this position must be able to perform essential job functions and the general duties and responsibilities with or without reasonable accommodation. The physical demand level for this position is Heavy. The following requirements may change depending on the individual property and according to the confines of the workspace available for any required task: Constant Activity (2/3rds or more of work time) Move about property to inspect for necessary repairs at a moderate pace Walk about property to inspect for necessary repairs at a moderate pace Simple grasping at a moderate pace Firm power grasping at a moderate pace Reaching of all levels Pushing and pulling (for example, using cart to transport supplies, tools, or equipment such as a power washer) Lift clipboard, hand tools, light bulbs up to 20 lbs. Frequent Activity (1/3rd to 2/3rd of work time) Stand to paint, inspect rooms, record data Manipulation skills Lift and carry bags of garbage, boxes of supplies, ladders, and other items between 11 and 40 pounds Kneel, crouch, and reach as necessary to repair plumbing and air conditioning units, paint, maintain property Bend and stoop at waist/torso at a moderate pace Occasional Activity (Up to 1/3rd of work time) Sit to record data in the computer and for meetings Climb stairs and ladders Balance to climb Lift 5-gallon pails of paint, a/c units, and other items between 40 and 100 lbs. Bend and twist neck and head Additional Critical Functions Use of Senses: Ability to communicate, smell, near and far acuity, depth perception, color vision and field of vision Cognitive Factors: Reading and writing comprehension, basic math/calculations, complex problem solving, computer work, (i.e., electronic email, typing notes, data entry, accessing company systems) Environmental Factors: Working around equipment and mechanical moving parts, walking on uneven ground, exposure to weather and extreme temperatures, exposure to cleaning and chemicals.

Job DescriptionJob Description: Automotive Internet Sales Consultant So, you want to sell automobiles that are known for their quality, reliability and beauty? You've come to the right place! We're looking for amazing Internet sales professionals to sell the best cars on the planet, in our dealership. If you believe being an Internet Sales Manager is a true craft -- one built on charisma, communication and thorough product knowledge, we want to talk to you! As an Internet Sales Consultant at our dealership, you’ll be responsible for managing Internet sales activities. From generating and managing Internet sales leads, you’ll be instrumental in helping our team continue our success. Join Our Team! Responsibilities: Contact customers and perform a needs analysis including make, type, and features of vehicle desired. Explain features and demonstrates operation of vehicle in showroom or on road. Researches availability of models and optional equipment using computer database. Works with Sales and F&I Managers to negotiate sales price, including tax, trade-in allowance, license fee, and discount, and requirements for financing or lease payment of vehicle. Walks the lot and visually inspects inventory. Completes all paperwork and arranges for delivery and registration of vehicle. Delivers and familiarizes the customer with vehicle. Attends/completes required training and department meetings. Regular and predictable attendance. Job Requirement:One year of related Internet sales Management experience and/or training; or equivalent combination of education and experience. Minimum 2 yrs experience automotive Internet sales experience Sales skills, great communication, and excellent customer service skills are a must. Organization and thorough follow-up skills are necessary for staying in touch with the client prior to and after the sale. Current valid driver’s license is required for all employees. Mathematical skills including ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals Benefits Include: Our team members enjoy a positive working environment with opportunities for professional growth through training and advancement from within the organization. Our team members also enjoy a comprehensive benefits program including: Medical, Employee discounts on vehicle purchases, parts and service Paid-time-off Comprehensive employee recognition programs. Continued training through the manufacturer. Opportunities for career advancement. When you join our organization, you'll enjoy comprehensive training, competitive compensation, and unparalleled benefits. Simply put, you'll experience the best that a career in the automotive industry has to offer. The above statements are intended to describe the general nature and level of the work being performed by people assigned to this work. This is not an exhaustive list of all duties and responsibilities. We reserve the right to amend and change responsibilities to meet business and organizational needs as necessary. We are an Equal Opportunity Employer and a drug free workplace. We Would Love To Talk With You! Apply By Clicking The 'Apply Now' Button

Job Seekers can review the Job Applicant Privacy Policy by clicking here () . Job Description : BUILD ON YOUR CAREER WITH A COMPANY THAT HAS A FUTURE At Ryder, our most important competitive advantage is our people. CULTURE- INTEGRITY- FAMILY . As an Operations Supervisor, you’ll be part of a fast-paced team, driven to succeed and empowered to develop your operations & managerial career. This is an essential industry and we’ve been in the game since 1933! Position Summary The “ Ops Supervisor ” assists the Ops Manager/Sr. Ops Manager with the operations and personnel for a shift of a particular location. The Operations Supervisor may have supervisory duties of employees on a shift, including but not limited to: Technicians-In· Charge, Customer Service Coordinators, Technicians, and Service Employees. The Operations Supervisor must be able to accomplish results and ensure business objectives and labor requirements are met. The Ops Supervisor is responsible for ensuring the customers' needs are being met while balancing financial, operating, quality, safety and asset targets against the requirements of the business. This position is responsible for the management of the location performance against metrics to meet and/or exceed assigned objectives. The Ops Supervisor will be cross functionally trained in order to be able to back up others within the shop. As with all Ryder shop positions, the Ops Supervisor, or “ Shift Supervisor ”, is responsible for adhering to all Ryder Maintenance Operations policies and procedures. This role may be a developmental position to prepare incumbents for the Ops Manager role because w_ e allow you to carve out your own career path and promote from within_ , based on performance. The continuous, on-the-job experience here at Ryder opens up other opportunities and provides a long-lasting career. This position comes with a competitive salary and yearly bonus. We also offer a full benefits package, 401k employer match, PTO, and a discount on shares! Shop Location: Orange, CA Schedule: Monday - Friday Shift: 6:00am to 2:30pm Salary - Bonus Salaries may be supplemented with a bonus as applicable and/or as business conditions allow. Salary is determined based on internal equity; internal salary ranges; market data/ranges; applicant’s skills; prior relevant experience; certain degrees or certifications, etc. Ryder offers comprehensive health and welfare benefits, to include medical, prescription, dental, vision, life insurance and disability insurance options, as well as paid time off for vacation, illness, bereavement, family and parental leave, and a tax-advantaged 401(k) retirement savings plan. Experience working in a heavy-duty truck or automotive repair shop is a plus! You thought that was it? Take a look at a few of these: Ryder's most recently been named "Top Company for Women to Work for in Transportation () " by Women in Trucking, one of Fortune Magazine ’s “World’s Most Admired Companies () ”, & one of “Reader's Choice Excellence Awards () ” by Inbound Logistics. What about our green initiative…? We have the largest EV footprint in the U.S. In addition to that, Verizon has recognized Ryder with their "Supplier Environmental Excellence Award () " Here is from people that work here! This is Ryder: Essential Functions • Workflow Management:Responsible for work analysis, planning and scheduling, scheduling and assigning work to technicians, productivity tracking and optimization, shift and shop meetings, and RO review and approvalEnsures all warranty policies and procedures are executedResponsible for Triage of unscheduled customer drive-ins, and for communicating with customers and assigning work to technicians as appropriateResponsible for conducting yard checks to ensure proper work scheduling and prioritization, • Labor ManagementProvides management, training and development of all personnel assignedResponsible for Performance Management of all assigned personnel, • Customer Management:Responsible for customer relationship management to include issue resolutions, customer satisfaction and retention, as well as ensuring vehicle uptimeResponsible for customer communication protocol as it pertains to PM Scheduling & follow-up, breakdowns and vehicle status updatesConduct customer visits as required by the Customer Care Plan, • Asset Management:Directs his/her direct reports in maintaining the appearance and maintenance of assigned location, including sustaining 65 standards in all relevant shop areas of responsibilityEvaluates needs and makes recommendation for shop tooling and equipment requirementsAssist in the management and oversight of vehicle specifications and vehicle in· service/out-service processAssist in ensuring all vehicles have required specifications in SAMResponsible for Parts Inventory management, policies and procedures, • Quality Management:Responsible for Quality Inspections of PM & repairs, as well as performing In Process Reviews of non-PM workPerform breakdown root cause analysis, implement corrective actions locally, and when necessary, communicate issues to Technical Assistance CenterEnsure Cleanliness and quality of repair for all maintained vehiclesWork with Service Manager to ensure all technicians are properly trained and qualified, and TOPS plan is prioritized based upon Breakdown, Rework and Running Cost trendsMaintain control/visibility over shop floor activities to ensure proper root cause diagnosis by technicians and that the yield on all parts/components is optimizedAssist in the development and ensure implementation of Quality Assurance Audit Corrective Action plans and Continuous Improvement programsAccountable for maintenance of all relevant documentation required to meet and/or exceed local, state, federal, as well as customer requirementsEnsure Employee compliance with Safety and EPA regulations and requirements, • Ability to professionally represent Ryder and competently interact with customer management, • Strong vehicle diagnostics/repair knowledge (preferred), • H.S. diploma/GED required, • Associate's degree preferred or 1-3 years or more experience in a maintenance operations environment required. Demonstrated success in a Ryder role may be substituted for this requirement, • Bachelor's degree preferred or 1-3 years or more experience in a maintenance operations environment required. Demonstrated success in a Ryder role may be substituted for this requirement, • Maintenance and Technical experience in a shop environment required, • Supervisory experience preferred, • Experience with a Shop Management System preferred LI-RL INDexempt FB Job Category: Maintenance Compensation Information : The compensation offered to a candidate may be influenced by a variety of factors, including the candidate’s relevant experience; education, including relevant degrees or certifications; work location; market data/ranges; internal equity; internal salary ranges; etc. The position may also be eligible to receive an annual bonus, commission, and/or long-term incentive plan based on the level and/or type. Compensation ranges for the position are below: Pay Type : Salaried Minimum Pay Range: $65K Maximum Pay Range: $65K Benefits Information: For all Full-time positions only : Ryder offers comprehensive health and welfare benefits, to include medical, prescription, dental, vision, life insurance and disability insurance options, as well as paid time off for vacation, illness, bereavement, family and parental leave, and a tax-advantaged 401(k) retirement savings plan. Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Important Note : Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Security Notice for Applicants: Ryder will only communicate with an applicant directly from a [@ryder.com] email address and will never conduct an interview online through a chat type forum, messaging app (such as WhatsApp or Telegram), or via an online questionnaire. During an interview, Ryder will never ask for any form of payment or banking details and will never solicit personal information outside of the formal submitted application through . Should you have any questions regarding the application process or to verify the legitimacy of an interview or Ryder representative, please contact Ryder at or 800-793-3754. Current Employees : If you are a current employee at Ryder, please click here () to log in to Workday to apply using the internal application process. Job Seekers can review the Job Applicant Privacy Policy by clicking here () . wd

Job Description Cerritos, CA | Onsite |Full time| $160k-$220k| Schedule: Varied Norm Reeves Auto Group is a nationally-recognized group of privately-owned retail automotive dealerships located in Southern California, Texas, and Florida including the #1 RETAIL DEALER IN THE NATION. With a history dating back to 1963, our group has established a reputation for innovation, integrity, and customer-centric services. We are expanding rapidly and are looking for talented individuals who are eager to grow their careers while the company continues to expand! As a Finance Manager, you’re one of the most important team members at Norm Reeves Genesis. You’re responsible for creating a super Norm Reeves Genesis experience for our guests by using your unwavering ethics, previous experience as a Finance Manager and existing relationship with Prime/Mid-Prime/Sub-Prime lenders. Your work will ensure guests are our primary focus and leave 100% satisfied with their Norm Reeves Hyundai experience. This role is a great way for a competitive person with exceptional follow through skills to launch your career with us! What You’ll Do: • Sell all of the tangible/in-tangle back-end products using a menu (Service Contracts, GAP, Paint/Fabric Sealants), • Manage Contracts in Transit on a daily basis, • Use your prior experience with credit challenged sub-prime auto loan lending and complete understanding of sub-prime automotive business, • Demonstrate resilience to work with lenders that specialize in poor credit profiles and sub-prime lending., • Pay attention to detail and collect all stipulations that go with a subprime credit file, • Take a transaction from A-Z, from the inception of the initial lead inquiry to delivery of the vehicle and funding of the loan., • A valid driver’s license and acceptable driving record, • Salesperson License, • MINIMUM of 2 YEARS in a finance manager role, • Ability to effectively rehash deals with Prime/Mid-prime/Sub-prime lenders, • Ability to average OVER $1,800 PRU, • Excellent organizational and follow up skills, • Unlock Your Potential – Free Training & Limitless Advancement Opportunities to Skyrocket Your Career Growth., • Invest in Yourself – Tuition Reimbursement, • Health and Wellness First – Comprehensive Medical, Dental, and Vision Plans to Keep You and Your Family Thriving., • Enjoy Complimentary Group Life Insurance for Added Peace of Mind., • Your Network, Your Success – Employee Referral Bonus Program - Earn While Building a Stronger Team., • Shop and Save with our generous discounts on Sales, Service, and Parts at Any Norm Reeves Location., • Secure Your Future - Build Wealth with 401k Matching, • Smart Savings, Smart Choices – Section 125 Cafeteria Plan & Flexible Spending Account - Save on Taxes for Qualified Expenses.

Job Description Position: Maintenance Supervisor Department: Operations Reports to (Position): Community Manager Employment Classification: Non-Exempt GENERAL SUMMARY: The Maintenance Supervisor is responsible for supervising maintenance technicians, diagnosing maintenance issues, making repairs, and completing maintenance requests and unit turns in a timely manner. The Maintenance Supervisor will also be responsible for maintaining the overall condition of the apartment community including the grounds and common areas and to provide a quality living environment for residents. Successful Maintenance Supervisors will be customer service focused, possess a sense of urgency, and be responsive to resident and team member needs. JOB DESCRIPTION: PRIMARY DUTIES AND RESPONSIBILITIES • Actively supervise and monitor maintenance technician team members within assigned property in coordination with the Community Manager., • Manages organization’s physical operations including but not limited to heating, ventilation and air conditioning, kitchen equipment, plumbing, and electric systems., • Performs maintenance duties including work orders and preventative maintenance activities, with minimal supervision consistent with company policies and procedures and direction from supervisor(s), completes documentation and necessary paperwork in a timely, accurate, and complete manner to document and track maintenance activities, • Ensure that apartments are ready for occupancy by performing various and as needed electrical, HVAC, plumbing, carpentry, and other miscellaneous maintenance and repairs necessary or directed, • Maintenance of grounds, common areas, and amenities by picking up trash and debris, pressure washing breezeways and commons areas, general cleaning as needed and other areas as directed, • Interfaces with appropriate staff/managers to receive information regarding maintenance needs; ensures timely response to requests., • Interfaces with outside contractors; coordinates communication with and work of outside contractors., • Monitors and maintains proper inventory levels; authorizes purchase orders for supplies and equipment., • Ensures all fire and safety inspections are completed and any discrepancies corrected; ensures property is following all safety and sanitation policies, procedures, and regulations., • Supervises and assists staff in maintenance and repair of equipment, buildings, and property as needed., • Compliance with company standards and applicable laws including but not limited to; Fair Housing, OSHA, Landlord Tenant, Local Building Codes, OSHA, and EEOC. Attend and participate in company safety meetings and required trainings and other safely related laws and requirements, and by reporting accidents and incidents promptly to management in an accurate manner, • Respond quickly to emergency situations during work hours and on-call after hours as needed., • Follows established process for inventory of supplies and materials at the community, by tracking inventory used, returning unused inventory, and notifying supervisor about re-ordering needs. Supports cost saving initiatives by fixing rather than replacing parts when possible and not being wasteful with materials and supplies, • Maintains high levels of customer service for prospects, residents, vendors, and associates, • Travel maybe required to assist other properties as needed, attend required training classes, respond to emergency after hours maintenance or other situations as necessary, • Perform other duties as assigned SUPERVISORY RESPONSIBILITIES: • Directly supervises maintenance technicians assigned to the property, • Carries out supervisory responsibilities in accordance with the organization's policies and applicable laws., • Responsibilities include interviewing, hiring, and training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. SPECIAL POSITION REQUIREMENTS: • Must have and maintain a valid California driver’s license, vehicle insurance coverage limits, and driving record in compliance with Company policy, • Ability to travel within and outside the county as needed. QUALIFICATIONS: • High School Diploma or equivalent required, • Three to five years industry or maintenance related experience, • One to two years of Supervisory experience, • Relevant certification preferred (EPA, HVAC, CPO), • Valid California driver’s license and Proof of Insurance per Company Policy, • Bilingual skills a plus SKILLS: • Ability to effectively communicate with residents, vendors, and individuals across the organization., • Outstanding orientation for customer-service with the ability to stay calm when addressing customer problem., • Ability to prioritize demands, organize time and resources to deliver solid and consistent results for the business and bring assignments to successful completion, • Ability to be “on-call” when requested and respond promptly to service emergencies, • Punctuality and regular attendance as scheduled, • Ensure compliance with time management policies including meal and rest periods, • Ability to effectively communicate with residents, vendors, and individuals across organization, • Ability to read and write English, speak, and understand spoken English, • Basic computer skills required PHYSICAL ABILITIES AND WORK ENVIRONMENT • Constant activity that requires intermittent bending, crouching, pushing/pulling, lifting/moving/carrying (light to heavy weight materials) up to twenty-five (25) pounds independently and fifty (50) pounds with assistance, and climbing ladders/stairs., • Requires manual dexterity to operate small motorized equipment or other tools., • Must have normal range of hearing, vision, and perception for proper operation of machines and equipment, • Must be able to work inside and outside in all weather conditions (rain, snow, heat, hail, wind, sleet), • Requires the use of appropriate safety equipment as required including back belts, goggles, masks, and gloves, • The noise level in the work environment is usually moderate. Requires occasional work where the sounds and noise levels are distracting or uncomfortable. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities, or physical requirements. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time.

Job Description POSITION SUMMARY: Under the direction of the department Supervisor/Manager, the Painter is responsible for coating surface parts, assembling and finishing products with protective or decorative materials such as paint, varnish, enamel, lacquer, dope or stain using spray gun. ESSENTIAL DUTIES & RESPONSIBILITIES: • Determines and selects correct mixes of coating material., • Applies paint to parts as directed by job orders., • Identifies and coats areas that are inaccessible to hand sprayer., • Identifies problems with equipment and will troubleshoot or repair paint guns., • Responsible for running ovens as needed., • Will complete visual inspection of masking on parts to ensure consistency as well as inspect for damaged product., • Completes necessary paperwork., • Works closely with the production team and assist as needed., • Adheres to safety regulations., • Performs other duties as assigned. QUALIFICATIONS & REQUIREMENTS: • Ability to communicate, read, and understand English., • Basic math skills., • Experience using and troubleshooting gravity spray gun., • Previous experience in aerospace industry or automotive repair, a plus., • Ability to effectively communicate both verbally and in writing with team members at all levels in the organization. ITAR REQUIREMENT: Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident). PHYSICAL DEMANDS: • Walking/Standing for prolonged periods of time, • Ability to lift up to 30 lbs, • Exposed heat, noise and chemical fumes while in production areas, • Good hand and eye coordination and movement We are an Equal Opportunity and Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state or local laws. 7:00AM - 3:30PM

Job Description Job Title: Territory Manager, Southern California Reporting to: Regional Sales Manager Location: Remote Website: Company Summary: As a rapidly growing global manufacturer of residential and commercial products, Greenworks is leading the charge toward a more powerful and sustainable future. With over 20 years of research and development, including over 1000 patents in outdoor power equipment, power tools, and lifestyle products, we're pushing the limits of what battery technology can do to improve the quality of work and life. Position Summary: The Territory Sales Manager (TSM) will create and develop relationships with Independent Dealers and large end users such as municipalities, educational facilities, hospitality, etc. with the purpose of selling Greenworks Professional Outdoor Power Equipment and raising brand awareness within the commercial OPE segment. This Manager will work closely with both the Regional Sales Manager (RSM) by developing opportunities to pursue new relationships to establish new commercial sales to expand our professional dealer base. The Territory Sales Manager will play a key role in the growth, development, and sales of our Brand within the independent dealer channel. The successful candidate will have strong industry knowledge of the professional handheld and wheeled outdoor power equipment business. Candidate should have good understanding the channels listed within the job requirements and the necessary sales skills to be successful within these customer bases. Candidate should have experience understanding the independent servicing dealer and their role within the channel. The ability to work independently and maintain relationships with business stakeholders will be critical to the success of this role. Essential Duties and Responsibilities: • Ownership of this business segment and the achievement of assigned goals and objectives., • Ownership of company issued demo equipment., • Perform product training to Distributor Staff and Key Dealer personnel, • Prospecting, lead generation, and acquisition of new accounts for Greenworks' distribution within these business areas., • Lead role within tradeshows and key marketing events within the channel., • Develop new product launch initiatives within assigned geography., • Work cross functional with other departments such as Marketing, Product Management, and Field Sales Personnel., • Performs other duties as assigned. Required Skills and Experience: • Positive attitude, • Strong attention to detail, • Excellent organizational and time management skills, • Excellent communication skills, including both written and verbal., • Ability to work in a team and independently., • Customer-centric attitude with the ability to deal with cross functional teams., • Demonstrated ability to collaborate with and influence senior level management and key business stakeholders. Position Type/Expected Hours of Work: • This is a full-time position, and hours of work and days are Monday through Friday, 8 a.m. to 5 p.m. Occasional evening and weekend work may be required as job duties demand. Required Education and Experience: • Bachelor's (Preferred), • 5+ years of experience working within an OPE or OPE Parts Manufacturer., • 5+ years of field sales experience within an OPE or OPE Parts Manufacturer., • Bilingual Preferred: English/ Spanish Compensation and Benefits: • Health, dental, and vision coverage, • Assistance with fertility treatment and adoption, • 401k company match plan Greenworks is an Equal Employment Opportunity (EEO) employer and does not discriminate on the basis of race, color, national origin, religion, gender, age, veteran status, political affiliation, sexual orientation, marital status, or disability (in compliance with the Americans with Disabilities Act) with respect to employment opportunities.

Job Description We are part of Premier Automotive, a successful dealer group with over 33 stores nationwide! We represent top brands such as Chevrolet, Honda, Toyota, Nissan, Kia, Dodge, Chrysler, Jeep and Ford. Premier is actively involved in giving back to our community in a HUGE way with our "Giving Hope Foundation." Job Summary: The responsibilities of a Service Advisor include greeting customers, listening to their needs, and scheduling appointments as needed. They may also set up loaner cars and verify insurance before maintenance is scheduled. What We Offer • Competitive compensation plan, • Medical, Dental and Vision Insurance, • 401(k) with company match, • Matching Christmas Club Savings, • Potential Signing Bonus, • Matching Christmas Club Savings, • Premium, ongoing professional development, • Participate in Giving Hope Community Service days, • Employee Programs for referral bonus, vehicle acquisition, and automotive purchases, • Greet customers promptly, • Obtain customer and vehicle information, • Clearly report all vehicle symptoms as described by the customer, • Determine and recommend maintenance base on age, mileage and history of vehicle, • Prepare a complete and accurate estimate of cost for labor and parts, • Establish follow up time, • Monitor the progress of each vehicle throughout the day, and update customers frequently, • Verify that the final invoice reconciles with the work performed on the repair order, • Proven record of achieving exceptional customer satisfaction, • Past experience as a service advisor, assistant lane manager or service consultant, • Very energetic personality, • A desire for a long-term career with a growing organization, • Personal and professional integrity

Job Description Job Title: CNC SET UP MACHINIST Department: MACHINE SHOP Reports To: MACHINE SHOP MANAGER FLSA Status: FULL TIME HOURLY Position Summary: CNC machinist must possess excellent attention to detail and will be responsible to follow out machining of parts in accordance with prints, and Company procedure requirements. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. · Create CNC/Lathe and Mill setup sheets · Able to setup/operate complex (+/-.010 or lower, TP <=.024,) CNC machining jobs · Perform complex Grind setup’s. · Complex GD&T measurement using calipers, height gage, bore gages etc. · Advanced shop math · Advanced Blueprint reading · Understand Geometric Dimensioning and Tolerances. · Must own basic inspection equipment (0-6” Caliper). Competencies: To perform the job successfully, an individual should demonstrate the following. Communications - Exhibits good listening and comprehension. Expresses ideas and thoughts in written form. Expresses ideas and thoughts verbally. Keeps others adequately informed. Selects and uses appropriate communication methods. Customer Service - Displays courtesy and sensitivity. Manages difficult or emotional customer situations. Meets commitments. Responds promptly to customer needs. Solicits customer feedback to improve service. Dependability - Commits to doing the best job possible. Follows instruction. Keeps commitments. Meets attendance and punctuality guidelines. Responds to requests for service and assistance. Takes responsibility for own actions. Planning & Organization - Integrates changes smoothly. Plans for additional resources. Prioritizes and plans work activities. Sets goals and objectives. Uses time efficiently. Works in an organized manner. Quality - Fosters quality focus in others. Improves processes. Measures key outcomes. Sets clear quality requirements. Solicits and applies customer feedback. Use of Technology - Adapts to new technologies. Demonstrates required skills. Keeps technical skills up to date. Troubleshoots technological problems. Uses technology to increase productivity. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience: High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. 5 years related experience or training preferred. Language Ability: Read and comprehend simple instructions, short correspondence and memos. Write simple correspondence. Effectively present information in one-on-one and small group situations to customers, clients and other employees. Mathematical Ability: Calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference and volume. Apply concepts of basic algebra and geometry. Reasoning Ability: Apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Deal with problems involving a few concrete variables in standardized situations. Computer Skills: Basic Supervisory Responsibilities: None. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be comfortable working in a Manufacturing facility. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to lift up to 40 Lbs. Must be able to work in a standing position up to 8 hours per day. The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor. Job Type: Full-time Pay: $25.00 - $35,0000 Hr Companies governed by ITAR (International Trade and Arms Regulations) reserve the right to background check/and random drug testing for all applicants Powered by JazzHR jnYbXJAPaE

Job Description About the job About the Company: Mission Microwave Technologies was founded in 2014 to revolutionize the next generation of Solid-State Power Amplifiers (SSPAs) and Block Upconverters (BUCs). We utilize advanced GaN transistors, unique power combining technology, and novel full-system designs to create the industry’s most efficient, lightweight, and compact high-power SSPAs. Our management team has more than 100 years of combined experience supplying high-performance, high-reliability SSPAs to commercial, military, and space customers. We’ve achieved significant growth in only 10 years and are currently owned by a private equity firm. We are proud to be listed as #28 in Fortune Best Workplaces in Manufacturing & Production, and certified a Great Place to Work for since 2022. Mission Microwave’s headquarters are located at 6060 Phyllis Drive, Cypress, CA 90603. Purpose/Summary: As a Manufacturing Engineer you will play a crucial role in ensuring the efficient production of our high-reliability RF electronics. Working closely with cross-functional teams, you will be responsible for optimizing manufacturing processes, improving product quality, and driving continuous improvement initiatives. This position will maintain quality procedures and documentation in order to guarantee the highest quality, reliability, repeatability, and efficiency of all products in production. Essential Duties and Responsibilities: * • Process Optimization: Identify opportunities for process improvement within manufacturing operations to enhance efficiency, reduce cycle times, and minimize waste., • New Product Introduction: Collaborate with R&D and Product Development teams to ensure smooth transition of new products from design to production. Develop and implement manufacturing processes for new products, considering factors such as scalability, cost-effectiveness, and quality., • Quality Assurance: Work closely with the Quality Manager to implement and maintain quality control procedures to ensure compliance with industry standards and customer requirements. Perform root cause analysis and implement corrective actions to address manufacturing issues and defects., • Production Support: Provide technical support to production teams, troubleshoot manufacturing issues, and resolve production bottlenecks to meet production targets and delivery schedules., • Documentation and Reporting: Maintain accurate documentation of manufacturing processes, including work instructions, standard operating procedures (SOPs), and quality records. Generate reports to track key performance indicators (KPIs) and provide regular updates to management., • Continuous Improvement: Lead and participate in continuous improvement initiatives to drive operational excellence and achieve cost savings. Required Qualifications: * • Bachelor's degree in Mechanical Engineering, Electrical Engineering, or related field, • Minimum of 6 years of direct experience, • Know and understand IPC 610, IPC 620, MIL-STD-883, • Know and understand ISO and AS9100 controls and regulations, • Know and understand ESD procedures, • Experience with small to medium RF parts and components, • Skilled in manufacturing operations such as general mechanical assembly of electronics, soldering, wire bonding, epoxy attach, die attach, machining, plating, PCBAs, etc., • Knowledge of various materials and processes; metals, ceramics, electronics, thermoplastics, semiconductors, etc., • Working knowledge of Microsoft Office, • Must be able to read and understand engineering, process, assembly, and traveler documentation, • Excellent problem-solving skills and ability to apply analytical methods to resolve technical challenges Preferred Qualifications: * • Master’s degree in a related field, • Experience with ERP/MRP systems for production planning and inventory management, • Strong communication skills, both verbal and written, and ability to communicate at all levels of the organization, • Self-motivated, • Ability to work in a fast paced environment, • Sense of ownership and responsibility, • Ability to work with discretion and confidentiality Physical Demands, Working and Environmental Conditions: * • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • The noise level in the work environment is usually moderate., • This role requires to be on-site during assigned hours 100% of time; less PTO, FML/STD/LTD.

Job Description NO EXTERNAL RECRUITERS PLEASE No Sponsorship/Transfer Available Company Summary: For over 60 years, MeriCal has been at the forefront of innovation in the dietary supplement industry, delivering custom manufacturing and packaging solutions with passion and precision. With state-of-the-art facilities in Southern California and Ogden, UT, we transform ideas into high-quality products—from research and development to the finished products. Our team, with over 230 years of combined experience, is dedicated to crafting exceptional gummies, probiotics, tablets, capsules, chewables, and powders using clinically backed ingredients. At MeriCal, we don’t just meet expectations—we exceed them, every time. Join us and be part of a dynamic, forward-thinking team shaping the future of nutrition! The Opportunity: As the Maintenance Mechanic Supervisor, you will oversee and support the maintenance team to ensure safe, efficient, and reliable production operations. This role is responsible for supervising and training mechanics, implementing and monitoring the preventative maintenance program, and coordinating with production leaders to minimize downtime and maximize productivity. You’ll manage parts inventory, troubleshoot and resolve equipment issues, enforce safety standards, and maintain a clean, organized shop environment. Reporting directly to the Maintenance Manager, you’ll play a key role in driving efficiency, compliance, and continuous improvement across all maintenance activities. What You’ll Do: • Supervise and delegate all maintenance projects to the mechanics as needed to support production., • Responsible for implementing and monitoring the Preventative Maintenance (PM) program and training subordinates on the correct and efficient method to complete the PM’s., • Responsible for keeping track of parts inventory and maintenance supplies. Alert the DOE for ordering replacement parts to avoid running out of any keep component or part that, • supports production or janitorial supplies., • Will train other mechanics and assist them when needed to maximize efficiencies and minimize down time., • Coordinate with the Manufacturing Manager and Production Supervisors to determine which production lines or other projects are needed necessary to support production activities., • Ensure the Maintenance Shop is kept clean, organized, keeping the safety of all mechanics as a priority one training them on all potential safety hazards as they pertain to machines, welding, cutting, drilling, milling or any other mechanical activity in the Maintenance Shop., • Assists workers in troubleshooting malfunctions on all machinery and equipment in an efficient and effective manner to minimize down time and maximize productivity., • Directs other mechanics on the most efficient way to dismantle and assemble equipment to maximize productivity., • Calculates the time it takes to troubleshoot, repair and re-set up the machine(s) to maximize productivity., • Enforces all safety rules to the mechanics and will report all unsafe acts to the Plant Director for possible disciplinary actions as indicated in the Company Employee Handbook., • Recommends methods of improvements in equipment performance or tooling to maximize quality and minimize down time., • Analyzes and resolves work problems as it pertains to employee issues or solving work related problems., • Follows company policies and enforces same policies among the maintenance team., • Including: safety, SOP’S, GMP’S, attendance, meal breaks and harassment., • The Maintenance Mechanic Supervisor Reports Directly to the Plant Director. What You’ll Bring: • Associate degree (AA) or equivalent from a two-year college, or technical school or 5 years related experience working in a Engineering Mechanical Maintenance Department., • Must understand both electrical and pneumatic schematics and other critical maintenance documentation associated with working in Maintenance., • Must have through working knowledge of all machinery and equipment in the facility., • Must have prior experience working as a Supervisor/Lead directing, motivating, and training maintenance mechanics., • Must have the ability to coordinate, schedule and plan all maintenance activities to all affective departments necessary to support production The Perks: • No-cost vision insurance (yes, you read that right!), employer-paid life insurance, paid company holidays, generous paid time off, sick leave, employee assistance program, and a comprehensive wellness program., • Affordable medical and dental insurance plans are tailored for you and your dependents., • Exceptional supplemental benefits, including Accident, Critical Illness, Hospitalization indemnity plans, and pet insurance., • 401(k) matching plan and more! A reasonable estimate of the current base pay range for this position is $115,000 - $120,000. The compensation offered may vary depending on the candidate’s geographic region, job-related knowledge, skills, and/or education. MeriCal is an equal opportunity employer and is committed to providing a workplace that is inclusive and free of discrimination and harassment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status, or any other characteristic protected by law. We encourage individuals of all backgrounds to apply. We believe in creating a diverse and inclusive workplace where all employees feel valued and respected, and where differences are embraced as strengths. We are dedicated to fostering an environment that promotes equality and celebrates diversity. Qualified applicants with disabilities may be entitled to reasonable accommodation under the terms of the Americans with Disabilities Act and/or certain state or local laws. Please contact if you need an accommodation due to a disability to complete an application, job interview, and/or to otherwise participate in the hiring process. This email does not respond to non-accommodations related requests. MeriCal uses E-Verify to confirm authorization to work in the United States. For more information on E-Verify, please visit the following website: For more information about the categories of personal information we collect from you and how we use, sell, and share that information, please see our Privacy Notice for California Contractors and Privacy Notice for California Employees.

Job Description Job Description Summary Polishing/Deburr Operator uses a variety of equipment/ tools to de-burr or polish precious metal/ plastic parts. Essential Duties · Responsible for using different types of tools, such as buffers, grinders, sanders, tumbling, and/or hand-held tools to remove rough edges, improve surface finish of various metal/plastics parts to meet blueprint and job traveler’s requirements · Operate equipment in deburr and cleaning/tumbler areas · Visual inspection cosmetic result to ensure products meet specific requirements · Wash or Clean parts as necessary · Responsible for identifying any issues and immediately informing manager to resolve the issue if needed · Follow priorities set per schedule · Follow process for accurate data collection · Keep workplace clean and well-organized Other Responsibilities · Assist Shipping and/or Assembly department as needed · Additional duties as assigned Computer / Technical Skills · Using computer terminals to enter data collection data Qualifications · Degree required High School Diploma or GED completion · Good communication skills with ability to be clear · Excellent organizational skills and attention to detail · Excellent time management skills with a proven ability to meet deadlines · Must be able to work in a fast-paced environment · Ability to multitask effectively Other Requirements · Must be a U.S. citizen as defined by ITAR (i.e. U.S. citizen, U.S permanent resident, or a protected individual as defined by 8 U.S.C. 1324b(a)(3)). · Must follow AS9100/IS9100 quality standard and processes · Must be able to read, write, and speak English fluently · Knowledge of proper safety procedures and best practices in manufacturing environment Physical Requirements Physical demands of the job that must be met by an employee to successfully perform the essential functions are represented below. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Frequently required to use manual dexterity, • Required to stand; walk; reach with hands and arms; climb or balance; and stoop, or kneel, • Required to stand or sit, possibly for an extended period, • Occasionally required to lift and/or move up to 30 pounds, • Specific vision abilities required by this job include close vision, peripheral vision, and ability to adjust focus, • Noise level is moderate for office, • Production floor noise level can be loud

Job DescriptionJob Description: Automotive Internet Sales Consultant So, you want to sell automobiles that are known for their quality, reliability and beauty? You've come to the right place! We're looking for amazing Internet sales professionals to sell the best cars on the planet, in our dealership. If you believe being an Internet Sales Manager is a true craft -- one built on charisma, communication and thorough product knowledge, we want to talk to you! As an Internet Sales Manager at our dealership, you’ll be responsible for managing Internet sales activities. From generating and managing Internet sales leads, you’ll be instrumental in helping our team continue our success. Join Our Team! Responsibilities: Contact customers and perform a needs analysis including make, type, and features of vehicle desired. Explain features and demonstrates operation of vehicle in showroom or on road. Researches availability of models and optional equipment using computer database. Works with Sales and F&I Managers to negotiate sales price, including tax, trade-in allowance, license fee, and discount, and requirements for financing or lease payment of vehicle. Walks the lot and visually inspects inventory. Completes all paperwork and arranges for delivery and registration of vehicle. Delivers and familiarizes the customer with vehicle. Attends/completes required training and department meetings. Regular and predictable attendance. Job Requirement:One year of related Internet sales Management experience and/or training; or equivalent combination of education and experience. Minimum 2 yrs experience automotive Internet sales experience Sales skills, great communication, and excellent customer service skills are a must. Organization and thorough follow-up skills are necessary for staying in touch with the client prior to and after the sale. Current valid driver’s license is required for all employees. Mathematical skills including abillity to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals Benefits Include: Our team members enjoy a positive working environment with opportunities for professional growth through training and advancement from within the organization. Our team members also enjoy a comprehensive benefits program including: Medical, Employee discounts on vehicle purchases, parts and service Paid-time-off Comprehensive employee recognition programs. Continued training through the manufacturer. Opportunities for career advancement. When you join our organization, you'll enjoy comprehensive training, competitive compensation, and unparalleled benefits. Simply put, you'll experience the best that a career in the automotive industry has to offer. Flexible schedule with every other weekend off. The above statements are intended to describe the general nature and level of the work being performed by people assigned to this work. This is not an exhaustive list of all duties and responsibilities. We reserve the right to amend and change responsibilities to meet business and organizational needs as necessary. We are an Equal Opportunity Employer and a drug free workplace. We Would Love To Talk With You! Apply By Clicking The 'Apply Now' Button

Job DescriptionPOSITION SUMMARY: Under close supervision and in accordance to level of knowledge and experience, the Grinder is responsible for the set-up and operation of precision cylindrical machine. Will perform precision cylindrical grinding of parts per customer specification. Will perform required quality workmanship through the use of precision measuring instruments and a variety of machinists hand tools. Interprets blueprints, sketches and engineering specifications; fits and assembles precision parts into grind machine and determines material, parts, and equipment required. Follows scheduled workflow assignments in order to meet customer demands and production requirements. ESSENTIAL DUTIES & RESPONSIBILITIES: • Grinds metal parts according to customer specifications and established performance standards., • Performs quality workmanship through the use of precision measuring instruments, enters data into the Statistical Process Control (SPC) system., • Refers to Tech Sheets, blue prints or Purchase Orders to ensure parts are grind to correct specified dimensions., • Follows scheduled workflow according to assigned priorities and communicates deviations to department manager, • Works toward increased performance and makes adjustments to equipment and set-ups as needed., • Monitors equipment maintenance with the guidance of Lead Grinder, Machinist, or Sr. Specialist., • Adheres to safety regulations., • Performs other duties as assigned. QUALIFICATIONS & REQUIREMENTS: • High school diploma or equivalent., • Basic math skills and English reading skills., • Ability to read and interpret blue prints, tech sheets and purchase orders., • Ability to use precision measuring/inspection equipment such as micrometer and height gages., • Has full knowledge and experience working with grind machines (i.e., Cincinnati Centerless Grinder, CNC Studer grinder)., • Aerospace industry experience preferred., • Must be willing to work overtime (including weekends) as needed. ITAR REQUIREMENT: Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident). We are an Equal Opportunity and Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state or local laws. 5:00AM - 1:30PM

Job DescriptionInterstate Advanced Materials (IAM) is looking for a Sales Pro – our Business Development Managers make top salaries, enjoy unlimited commission programs geared for company growth and personal wealth building, and cover geographies with literally every possible industry present. We are a wholesale distributor, fabricator/machinists of high performance plastic sheet, rod, tube and film supporting various industries including aerospace, defense, lumber manufacturing, semiconductor, medical, food processing, automotive, agriculture and more. We are a family owned business, with a corporate office in Sacramento, CA, and facilities in seven states. If you are passionate about life, curious about what’s out there, responsive to those in need, constantly looking to improve, and honest and integral to your core – IAM may be the next best thing for you to consider. Don’t let opportunity pass you by! We’re well known in the Industrial Plastics supply world and this opportunity won’t last long. We offer a car allowance, outstanding health benefits, vacation, and a 401(k). Apply now for an opening based out of our Norwalk, CA facility. Come build the future with us.. At IAM, we support the professional growth of our employees while providing exceptional services to our customers. An environmentally sustainable, award-winning organization, IAM is committed to solving customer challenges with innovation, dedication and collaboration. What’s the job all about? As a Business Development Manager (BDM) your primary focus would be on new business development and growth opportunities within existing accounts, spending 80-90% of their time on new business development with the remaining 10-20% through organic growth in existing accounts. Experience in industrial sales or plastics sales is required, but if you’re autonomous, self-driven, self-managed, and an industrial sales business driver looking for more – money, responsibility, freedom, opportunity, and fun…send us your resume and tell us why we shouldn’t overlook you. Responsibilities include: • Managing projects from start to finish, • Prospecting and targeting development versus maintenance, • Selling machined parts, sheet, tube, and rod, and industrial plastics machining solutions and services. Requirements:, • Overnight stays as needed to maximize itinerary, • Plastics industry or similar required, • Technical aptitude required Powered by JazzHR 1lyTZpeJhX

Job DescriptionDescription: About the Role We are seeking a highly skilled and motivated Machine Shop Manager to lead and oversee all operations within our machine shop. This role requires a hands-on leader with a solid background in machining, CNC programming, metal fabrication, and automation, coupled with proven experience in team supervision and continuous improvement initiatives. If you’re passionate about driving operational excellence, fostering a safe and efficient work environment, and leading a high-performing team, we want to hear from you! Key Responsibilities • Manage day-to-day machine shop operations to meet production schedules and quality standards., • Lead and support a team of machinists, CNC operators, and fabrication technicians., • Collaborate with engineering and production teams to ensure accurate blueprint interpretation and manufacturing execution., • Develop and implement shop floor procedures to boost productivity, efficiency, and quality., • Oversee preventive maintenance, troubleshoot equipment issues, and coordinate necessary repairs., • Ensure compliance with OSHA safety regulations and company policies., • Maintain and manage inventory of raw materials, tools, and supplies., • Train, mentor, and evaluate staff to improve performance and technical capabilities., • Identify and resolve workflow inefficiencies and quality concerns., • Track and report key performance indicators (KPI's) including throughput, scrap rate, and machine downtime., • Drive continuous improvement using Lean Manufacturing and 5S methodologies., • Assess and recommend capital investments and automation solutions. Qualifications • Minimum 5 years of experience in machining and metal fabrication, with at least 2 years in a supervisory or management role., • Expertise in CNC programming, machining processes, tooling, and automation equipment., • Strong knowledge of blueprint reading, GD&T, and precision measuring tools., • Proven ability to lead and develop a diverse team., • Experience with steel products and architectural metalwork is a plus., • Excellent problem-solving, organizational, and communication skills., • Proficiency in Microsoft Office Suite and shop management software., • Working knowledge of OSHA standards and workplace safety practices Requirements: Education • High School Diploma or equivalent required., • Technical certification or degree in Manufacturing Technology, Mechanical Engineering, or related field preferred Physical Requirements • Ability to stand and move throughout the shop floor for extended periods., • Use of hands and arms to operate tools, handle parts, and perform shop tasks., • Must occasionally lift and carry up to 50 pounds., • Exposure to typical machine shop conditions including varying temperatures, noise, dust, and fumes.

Job Description Overview: The Lead Security Technician plays a pivotal role in the installation of security systems, ensuring projects meet Premise One's quality standards and customer satisfaction. This position requires proficiency in Card Access, CCTV, and Intrusion Detection systems, along with strong communication and leadership skills. PLEASE NOTE: THIS IS A CLIENT SPECIFIC POSITION THAT REQUIRES OFF-SHIFT WORK, TYPICALLY 12:30AM – 7:30AM, MONDAY – FRIDAY. CANDIDATES MUST BE FLEXIBLE IN ADJUSTING WORKING HOURS, AS NEEDED. Responsibilities: • Installation & Direction:, • Execute project installations as directed by the Project Manager., • Follow project drawings and manufacturer specifications for all installations., • Team Collaboration:, • Communicate professionally with field staff and customers., • Collaborate effectively with the Project Manager, Field Technicians, and other team members., • Safety Compliance:, • Adhere to company safety guidelines and requirements consistently., • Technical Expertise:, • Troubleshoot and resolve technical issues as they arise., • Demonstrate a thorough understanding of security technology and installation processes., • Representation:, • Act as the primary on-site contact for clients, representing Premise One professionally., • Attend site meetings, as required and provide updates on project progress., • Training & Development:, • Proficient in installing Card Access, CCTV, and Intrusion Detection systems., • Self-motivated, positive attitude, and professionalism in all interactions., • Ability to work at heights, in confined spaces, and lift up to 50 pounds., • Willingness to travel at least 60% of the time within the designated work location or regional territory., • Experience with Lenel, Software House, Axis, or Avigilon systems is a plus., • Availability to work off shift work, overtime, weekends, and out-of-town assignments, as needed., • Ability to handle physical workloads effectively. Qualifications: • Minimum 2 years of relevant experience in AV, Security, Access Control, or Infrastructure Cabling., • Proven experience in leading project teams and reporting to a Foreman/Project Manager., • Must possess basic hand tools necessary for project completion., • Strong mechanical aptitude and troubleshooting capabilities. Interaction with Others: Must be able to follow Company policies; receive directions from others; work effectively with co-workers in a constructive and positive manner; listen to and objectively consider ideas and suggestions for improvement; keep others informed of work progress, deadlines, or other pertinent issues; address problems constructively to find acceptable solutions; keep commitments; and always respect the diversity of the Company's work force in actions, words and deeds. Experience: Three to Five years related experience and/or training required. Language Skills: Ability to read and interpret documents, write correspondence, and communicate effectively with others and third parties, preferably, and sometimes exclusively, in English. Mathematical Skills: Competent ability to add, subtract, multiply and divide using whole numbers, common fractions, and decimals. Competent ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Reasoning Ability: Competent ability to define problems, collect data, establish facts, and draw valid conclusions in situations where only limited standardizations exists. Certificates, Licenses, Registrations: Driving is a requirement for this position therefore A valid driver's license is required. The employee's motor vehicle record will be subject to the policies and provisions contained in the company's Fleet Safety Program. First-Aid and CPR Certification a plus Manufacturer Certifications a plus Industry Certifications a plus Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable employees with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, squat or crawl; identify (colored) wires by sight; talk or hear; and use a ladder and possibly a scaffold, or A-frame. The employee frequently is required to sit. The employee must occasionally lift and/or move up to 25 pounds, and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. It is required to Look at computer monitors for long periods of time. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; risk of electrical shock; and vibration. The noise level in the work environment is sometimes loud. Safety: This position is deemed safety-sensitive and drug-free. Anyone considered for this position must adhere to the company’s safety policies, manuals, and other documents, including safety-related materials promulgated or required under applicable federal or state law. Powered by JazzHR BLU4MwgNhH

Job DescriptionJob Description: Automotive Finance Manager If you're serious about your career, then rest assured you've come to the right place. You'll find the opportunities, resources, and support you need to grow and develop professionally. We are committed to your success and invested in your future. Finance & Insurance Manager is responsible for coordinating the sale of finance and insurance programs to customers. The Finance and Insurance Manager works with lenders and financial institutions to provide financial services to dealership customers. Essential Duties and Responsibilities include the following. Other duties may be assigned. Sells financing and insurance to customers. Responsible for the attainment and gross production of financial services’ goals and objectives. Reviews customer credit applications. Makes extended service contracts and other owner protection programs available to customers. Assesses profitability to dealership of financing arrangements. Utilizes the menu selling process. Ensures necessary documentation for each deal is complete by utilizing a deal checklist. Maintains Customer Satisfaction scores at or above company standards. Works closely with sales team. Ensures compliance with all laws and regulatory obligations relative to financial services and products. Supports the dealership’s initiative in Safeguard and Transaction compliance programs. Complies with all Safeguard and Transaction compliance rules and regulations. Ensures that all organizational activities and operations are carried out in compliance with organizational guidelines and local, state, and federal regulations and laws governing business operations. Oversees completion and submission of all financing documents. Acts as liaison between the customer and the lending institution. Reinforces company policies and adheres to company standards. Encourages compliance with applicable laws and regulations. Ensures adherence to F&I reporting requirements of company. Attends weekly manager meetings. Maintains effective employee relations. Promotes and maintains good ESI. Job Requirement: At least '3' years automotive dealership F&I producer experience required Finance and Insurance Management training preferred Proven track record Strong record of positive Customer Satisfaction results Team-oriented Submit to and successfully complete MVR, background check, and pre-employment drug test Valid driver's license with good driving record Benefits Include: Our team members enjoy a positive working environment with opportunities for professional growth through training and advancement from within the organization. Our team members also enjoy a comprehensive benefits program including: Medical, Employee discounts on vehicle purchases, parts and service Paid-time-off Comprehensive employee recognition programs. Continued training through the manufacturer. Opportunities for career advancement. When you join our organization, you'll enjoy comprehensive training, competitive compensation, and unparalleled benefits. Simply put, you'll experience the best that a career in the automotive industry has to offer. The above statements are intended to describe the general nature and level of the work being performed by people assigned to this work. This is not an exhaustive list of all duties and responsibilities. We reserve the right to amend and change responsibilities to meet business and organizational needs as necessary. We are an Equal Opportunity Employer and a drug free workplace. We Would Love To Talk With You! Apply By Clicking The 'Apply Now' Button

Job Description POSITION SUMMARY: Under the direction of the department Supervisor/Manager, the Painter is responsible for coating surface parts, assembling and finishing products with protective or decorative materials such as paint, varnish, enamel, lacquer, dope or stain using spray gun. ESSENTIAL DUTIES & RESPONSIBILITIES: • Determines and selects correct mixes of coating material., • Applies paint to parts as directed by job orders., • Identifies and coats areas that are inaccessible to hand sprayer., • Identifies problems with equipment and will troubleshoot or repair paint guns., • Responsible for running ovens as needed., • Will complete visual inspection of masking on parts to ensure consistency as well as inspect for damaged product., • Completes necessary paperwork., • Works closely with the production team and assist as needed., • Adheres to safety regulations., • Performs other duties as assigned. QUALIFICATIONS & REQUIREMENTS: • Ability to communicate, read, and understand English., • Basic math skills., • Experience using and troubleshooting gravity spray gun., • Previous experience in aerospace industry or automotive repair, a plus., • Ability to effectively communicate both verbally and in writing with team members at all levels in the organization. ITAR REQUIREMENT: Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident). PHYSICAL DEMANDS: • Walking/Standing for prolonged periods of time, • Ability to lift up to 30 lbs, • Exposed heat, noise and chemical fumes while in production areas, • Good hand and eye coordination and movement We are an Equal Opportunity and Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state or local laws. 5:00AM -1:30PM

Job DescriptionPOSITION SUMMARY: Under close supervision and in accordance to level of knowledge and experience, the Grinder is responsible for the set-up and operation of precision cylindrical machine. Will perform precision cylindrical grinding of parts per customer specification. Will perform required quality workmanship through the use of precision measuring instruments and a variety of machinists hand tools. Interprets blueprints, sketches and engineering specifications; fits and assembles precision parts into grind machine and determines material, parts, and equipment required. Follows scheduled workflow assignments in order to meet customer demands and production requirements. ESSENTIAL DUTIES & RESPONSIBILITIES: • Grinds metal parts according to customer specifications and established performance standards., • Performs quality workmanship through the use of precision measuring instruments, enters data into the Statistical Process Control (SPC) system., • Refers to Tech Sheets, blue prints or Purchase Orders to ensure parts are grind to correct specified dimensions., • Follows scheduled workflow according to assigned priorities and communicates deviations to department manager, • Works toward increased performance and makes adjustments to equipment and set-ups as needed., • Monitors equipment maintenance with the guidance of Lead Grinder, Machinist, or Sr. Specialist., • Adheres to safety regulations., • Performs other duties as assigned. QUALIFICATIONS & REQUIREMENTS: • High school diploma or equivalent., • Basic math skills and English reading skills., • Ability to read and interpret blue prints, tech sheets and purchase orders., • Ability to use precision measuring/inspection equipment such as micrometer and height gages., • Has full knowledge and experience working with grind machines (i.e., Cincinnati Centerless Grinder, CNC Studer grinder)., • Aerospace industry experience preferred., • Must be willing to work overtime (including weekends) as needed. ITAR REQUIREMENT: Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident). We are an Equal Opportunity and Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state or local laws. 2:30PM - 11:00PM

Job Description Professional Search Group OC is partnering with a client to source an experienced Electronic Test Operator / Test Assembler to join their engineering production team. This role is hands-on and requires experience with circuit testing, soldering, and troubleshooting in a low-volume RF production environment. This organization has been around for over 30 years providing defense technology solutions. They offer a a great working environment, opportunity for growth, & stability. Read to be a part of something great???! Apply! Electronic Test Operator / Test Assembler Responsibilities: • Perform DC and RF circuit card tests and assemblies per schematic drawings., • Set up and change out test fixtures for various test operations., • Input test and assembly data into a PC., • Conduct troubleshooting on RF and DC test fixtures as needed., • Solder 0402 SMT chip components and other small electronic parts., • Ability to read, write, and speak English., • Experience handling Printed Circuit Board Assemblies (PCBAs) in an ESD-safe environment., • Ability to read and interpret assembly instructions, AC/DC test instructions, and electronic schematics., • Proficient with test equipment: DMM, watt meter, spectrum analyzer, signal generator, and vector network analyzer., • Skilled in RF test fixture setup (cable and wire connections)., • Strong visual inspection ability for SMT components, cable, and wire connections., • Troubleshooting skills down to the component level., • Ability to solder 0402 SMT components., • J-STD-001 or IPC 610 soldering certification (current or past)., • A.S. degree in Electronics Engineering or equivalent. Apply with Professional Search Group OC today! Donovan Aranda Division Manager 562-378-0027

Job Description Position Summary: Reporting into the Chief Executive Officer, the Director of Quality is responsible for developing, coordinating, and implementing quality and regulatory strategies and quality programs required for the development, regulatory approval, successful manufacture, commercialization, and post-market surveillance of its products. Responsible for interacting, influencing, and collaborating with all levels of the organization. This position serves as the company’s senior advisor, implementer and administrator for regulatory strategies and regulatory compliance. Also serves as the Management Representative, Person Responsible for Regulatory Compliance 21 CFR Part 111 and 117. Provides leadership and development to assigned teams and staff. Key Accountabilities · Establishes, implements, and manages the overall regulatory, quality assurance, quality control, and complaint handling functions to ensure the quality, safety, and reliability of all company products. This includes monitoring the complete manufacturing and QA/QC process to ensure conformance and compliance, as well as management of the Quality System, ensuring compliance with applicable local and federal regulatory requirements and/or programs including but not limited to the regulatory requirements of the U.S. · Provides sound advice and guidance regarding the impact of regulatory and quality issues on overall corporate strategy and operations. · Continuously identifies opportunities to improve the Quality System, product quality, simplify processes and/or reduce of the costs of quality. · Manages the quality and regulatory staff and departmental resource needs. · Provides leadership and management to ensure that the mission and core values of the company are put into place. · Creates and leads a high-performing, innovative, management team that attracts, recruits, develops, and retains exceptional staff. Competencies · People Manager competencies: Building talent, Driving for results, Customer focus, Driving for innovation, Emotional intelligence. · Strategic thinking · Leadership, coaching, and mentoring · Communication and influence · Business acumen · Financial management · Technical Capacity · Analysis and problem solving Education, Experience, Skills, and Knowledge · Bachelor’s degree in life sciences or related field required, advanced degree or certification in Quality or Regulatory preferred. · 10 plus years of experience in the Nutraceutical industry, including management experience required. · Quality, regulatory and dietary and supplement industry experience required, with extensive knowledge of strategic planning of the USA and worldwide regulations, quality and regulatory processes, and experience interfacing with regulatory bodies, such as FDA, Notified Bodies and Competent Authorities required. · Excellent knowledge of Quality Systems Regulations, cGMP, and 21 CFR Part 11, 111, and 117 regulations as they apply to nutraceutical manufacturing required. · Extensive experience interfacing with FDA and/or regulatory auditors required. · Excellent working knowledge of statistics, teamwork environments, workplace safety and complaint handling systems required. · Outstanding verbal and written skills, utilizing critical thinking and organizational talents are required. · Track record of success at building and leading high-performing, complex teams. Work Environment: · The work environment characteristics described here are representative of those employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. · While performing the duties of this job, the employee is occasionally exposed to work near moving mechanical parts, fumes, or airborne particles and risks of electrical shock. · The noise level in the work environment is usually moderate. · While in the plant, the employee must utilize the required personal protective equipment. Physical Demands: · An employee must meet the physical demands described here to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. · Physical demands require sitting for extended periods, walking, bending, reaching, carrying, and occasionally lifting and/or moving objects up to 25 pounds. While performing the duties of this job, the employee is occasionally required to use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. Specific vision abilities required by this job include close vision, peripheral vision, and the ability to adjust focus.

Job Description Company Website: Great Place to Work-Certified: Interview with Francis Auricchio, our President & CEO: Visit our Youtube Channel: Our Mission: Mission Microwave Technologies was founded in early 2014 to provide state-of-the-art solid-state transmit infrastructure to the satellite communication industry. Our customers provide satellite links to a host of spaces, both commercial and military. Since the end of 2020, Mission Microwave’s product profile has grown to provide many unique offerings! We inspire passion, foster innovation, build collaboration, and reward excellence. Mission Microwave Technologies is dedicated to a work environment that encourages your growth and supports the mutual success of our people and our company. As a full-time employee, you will enjoy a competitive salary, the opportunity to work with a talented and diverse group of professionals, and a robust benefits package including medical, dental, vision plans, life and AD&D, paid time off, and 401(k). Summary: The Quality Assurance (QA) Manager is responsible for ensuring the highest quality RF electronic products are produced and that all internal and external requirements are met prior to shipping products to our customers. The QA Manager must have experience dealing with ISO, AS, IPC and MIL-STD requirements. Ability to lead a team in executing the quality standards and processes for the company. Support the procedures in use to ensure quality, reliability, repeatability and efficiency of all products in production. Will be responsible for ensuring that all incoming, in-work and final inspections are in compliance with the appropriate quality standards. Perform defect analysis and corrective action documentation and implementation. Able to prep and perform AS9100/ISO9001 internal audits. Ongoing efforts to continually improve quality in the manufacturing area. Essential Duties and Responsibilities: • Supervise and motivate the Quality staff as well as other staff members to produce the highest quality products, • Ensure manufacturing compliance to quality standards and Mission policies/procedures, • Compliance to customer requirements, skilled at customer interactions and reporting, • Responsible for supplier evaluations, interactions and audits, • Maintain records of quality reports, statistical reviews, and relevant documentation, • Provide detailed in-process inspections and establish processes to verify conformance to design requirements, • Oversight of corrective actions and prevent non-conformances, • Drive continuous improvement; assist Engineering in root cause analysis and corrective action, • Communicate and help resolve quality issues in a timely manner, • Observe technical operations and offer guidance/recommendations as they relate to quality, • Minimum of 7 years of QA experience, • Knowledge and understanding of IPC 610, MIL-STD-883, MIL-STD-750, MIL-STD-1580, • Knowledge and understanding of ISO 9001, AS9100 and AS9102 regulations, • Knowledge and understanding of ESD procedures, • Creating, reviewing and processing; NCMRs, CARs, SCARs, PARs, etc., • Knowledge of various materials and processes; metals, ceramics, electronics, plastics, semiconductors, etc., • Knowledge in the use of epoxies and bonding materials, • Able to read and understand engineering, process, assembly and traveler documentation, • Comfortable with working and communicating with various engineers and managers, • Experience with training and certification, • Knowledge of airborne, avionics, RF, analog and digital products, • Work well in a fast paced environment, • Detail-oriented, • Self-motivated with the ability to motivate and lead a team, • Sense of ownership and responsibility, • High school diploma or equivalent, • Technical or college diploma a plus, • Quality certifications a plus, • Prior supervisory experience, • Ability to read and interpret documents, • Ability to write routine reports and correspondence, • Strong communication skills, both verbal and written, and ability to communicate at all levels of the organization, • Ability to add, subtract, multiply, and divide in all units of measure, common fractions and decimals, • Ability to compute rate, ratio, and percent and to draw and interpret bar graphs, • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form, • Ability to define problems, collect data, establish facts, and draw valid conclusions The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee frequently is required to sit. The employee is occasionally required to stand; walk; climb or balance; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts, fumes or airborne particles, and toxic or caustic chemicals. The employee is occasionally exposed to risk of electrical shock. The noise level in the work environment is usually moderate. This role requires to be on-site during assigned hours 100% of time; less PTO, FML/STD/LTD. Mission Microwave Technologies considers a variety of factors to determine individual base salary offers to candidates, including: • Role and related responsibilities, • Prior work experience, • Education, training, skills and certifications, • Internal equity with other Mission employees in similar roles Pay: $85,000.00 - $95,000.00 per year Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Parental leave, • Referral program, • quality assurance or quality engineering: 1 year (Required)

Job DescriptionDescription: SUMMARY: Emergency Vehicle Group, Inc. is a leading emergency vehicle dealer and service center for fire apparatus, ambulances, command and specialty vehicles that is adding to our service operations. We are seeking highly skilled heavy truck mechanic to work on fire apparatus, ambulances and other emergency vehicles. Experience with air brakes, heavy truck components, hydraulics, water pumps, and aerial devices, complex electrical systems is expected. Please submit resume, employment and salary history. Qualified Applicants Only. ESSENTIAL JOB FUNCTIONS: • Repair and maintain various types of emergency vehicles, such as pumpers, aerials, ambulances and other vehicles., • Perform preventative maintenance and inspections on heavy truck chassis and fire components., • Major repairs on fire pumps, aerials, hydraulic systems, air brakes and electrical systems., • Travel to customers sites for repairs as needed., • Perform work as directed by Service Manager, • Other duties as assigned and can vary daily, • Ensures shop cleanliness and maintenance on a regular basis., • Processes and tracks repair orders., • Performs road tests on vehicles in order to assure roper operating levels., • Operates computer to document repair work and maintenance on a daily basis., • Monitors and advises all safety related issues related the shop area, vehicles and wherever maintenance is being performed., • Available to perform emergency repair work after hours including nights, weekends and holidays.Requirements:, • Reads and follows simple to complicated instructions, schematics and other information contained in repair manuals or the diagnosis and repair of fire and EMS vehicles and equipment., • Performs calculations and works with numbers to solve problems., • Reads and understands reference books and complicated procedures and manuals., • Pays attention to detail while ensuring crews observe safety precautions., • Knowledge of safety hazards and precautions., • High School Diploma or GED and 2+ year mechanical repair and maintenance work or equivalent combination of education and experience., • Class B or A CDL Driver’s License, • ASE Mechanic certification preferred, • Must obtain Emergency Vehicle Technician (EVT)certification within 1 year of hire date., • Work is performed in an automotive repair shop and on customer’s sites., • May be subject to bending, twisting, reaching, kneeling and lifting such as retrieving and replacing materials, supplies and inventory or when performing preventative maintenance and repair of vehicles and heavy equipment., • May be subject to exposure to extreme weather conditions, hazardous chemicals and fumes common to automotive repair shops., • Operates various emergency vehicles and equipment on an as-needed basis (for testing purposes), • Operates volt ohm meter, ampmeter, pressure gauges, nozzle and valve repair kits, calibrating tools for engines, rakes, micrometers and dial calipers, welders, grinders, torch, brazing rod, precision gauges, inspection and diagnostic equipment., • Must have own tools.

Job Description Chiropractor – Part-Time Location: Yorba Linda, CA A better way to deliver care starts here! The Joint Chiropractic is revolutionizing access to care by delivering high-quality, affordable chiropractic services in a convenient retail setting. As the largest operator, manager, and franchisor of chiropractic clinics in the U.S., The Joint delivers more than 12 million patient visits annually across nearly 1,000 locations. Recognized by Forbes, Fortune, and Franchise Times, we are leading a movement to make wellness care more accessible to all. Position Summary We are seeking a dedicated and patient-centered Chiropractor to join our clinic team. This part-time role focuses on delivering exceptional patient care in a supportive, streamlined environment, allowing you to focus on what you do best, improving lives through routine chiropractic care. Key Responsibilities • Consult with patients by reviewing health and medical histories, examining, and evaluating neuromusculoskeletal systems, • Perform manual adjustments to the spine and other joints to correct musculoskeletal conditions, • Educate patients on the benefits of routine chiropractic care and recommend treatment plans, • Maintain accurate and timely patient records, • Arrange for diagnostic imaging when medically necessary and analyze results, • Build positive doctor-patient relationships, • Doctor of Chiropractic (D.C.) degree from an accredited college, • Valid DC license in the applicable state, • Passing scores for NBCE Parts I–IV or recent SPEC exam, • Eligibility for malpractice insurance This role requires availability Monday thru Saturday Compensation and Benefits • $38 to $45 per hour, depending on experience, • Company-paid malpractice insurance Business Structure You are applying to work with a franchisee of The Joint Corp. If hired, the franchisee will be your only employer. Franchisees are independent business owners who set their own terms of employment, including wage and benefit programs, which may vary. Ready to Join the Movement? Apply today and start moving your career in the direction you want. For more information, visit , or follow the brand on Facebook, Instagram, Twitter, YouTube and LinkedIn. Powered by JazzHR NEAZk49Xbm

Job DescriptionSalary: $21-32/hour DOE At Winchester Interconnect, we always do the right thing, the right way. Winchester Interconnect is committed to inspiring the most innovative teams. We foster a dynamic, inclusive environment that thrives on collaboration and continuous growth. We hire exceptional people, celebrate wins, empower employee growth, and provide opportunities to thrive. Winchester is where potential transforms into purpose, and every team member plays a vital role in shaping our shared success. Position Summary: As our Buyer, you will be a part of a knowledgeable and well-diverse engineering team who loves to have fun and get stuff done! You will play a key role in purchasing and scheduling activities. This position supports all operational locations. Qualifications & Requirements: • Minimum of 5-year experience in purchasing is required, • Must possess excellent written, oral, and presentation skills as well as solid math skills, • Must be able to multitask, • Must have strong telephone skills and be very organized, • Must be a team player, • Must be able to work independently, • Must be able to work with Microsoft Office and Google Workspace as well as the company's MRP/ERP system Our core values - Accountability, Collaboration, and Empowerment (ACE) - are the foundation of how we operate and drive success. You will take ownership of your contributions, collaborate with a team that gets stuff done, and be empowered to innovate and pursue bold initiatives that drive our business forward. Are You Our Next ACE? • Make daily purchases within allotted programs based on requisitions and analyze the quality, specifications and delivery requirements, • Send out quotations for bid on non-contracted items and negotiates best price, • Enter purchase orders into system and issue to supplier via fax or email, • Review purchase orders on a weekly basis via our reporting system and follow up on past due items plus requirements due in coming weeks, • Highlight any problem areas and report them to the manager, • Interact with Planning and Production to ensure any changes in production requirements are flowed down to suppliers, • Liaise with planners to control scheduling of parts to ensure stock levels meet demands while staying within stock level buffers, • Review Non-Conformance Reports (NCRs)/Withhold tags written against suppliers and relays such information to them with corrective action, • Update suppliers with engineering changes and drawings Systems Youll Use: • Google Enterprise, • BambooHR, • Paycom & ADP Pay Transparency: Winchester Interconnect Corporation is committed to pay transparency. The pay range for this position is $21 to $32 per hour. Exact salary will be contingent upon your experience, education, skills, and any other factors Winchester Interconnect Corporation considers relevant to the hiring decision. For a sneak peek into some of our benefits and to learn more about our career opportunities, click here. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. In addition to federal law requirements, Winchester Interconnect complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. Winchester Interconnect expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status.