Pipe welder jobs in Houston, TexasCreate job alerts

Job Description Welder / Fitter Location: Houston, TX 77032 Pay Rate: $22/hr to $24/hr DOE Schedule: 8 AM to 5 PM , Monday to Friday Seeking a determined and professional for carrying out basic tasks to perform assembly and welding operations of fabricated metal products. This candidate must have the ability and desire to function as part of a team and to also perform well independently. The candidate must have good communication skills, a positive attitude, be prepared to multitask, and adapt well to change. Responsibilities: • Ability to read and interpret engineering drawings as they pertain to welding of parts. Ability to complete routine reports., • Ability to calculate figures and amounts such as area, circumference and volume. Ability to apply concept of basic algebra and geometry., • Good communication skill., • Ability to work without close supervision and exercise individual initiative., • Set up and operate multiple hydraulic and electric drive bending machines., • Set up and operate a variety of manual machines. Ability to use the following hand or powered hand tools, including but not limited to, drill, file, grinder, hammer, pliers and screwdrivers., • Use the following measuring tools: tape meter, caliper, square., • Set up and weld parts using welding equipment following welding procedures., • Operate the following plant equipment: forklift, hand cutting torch, pendant jib, gantry and overhead cranes (also radio controlled)., • Read and accurately interpret specifications from cut sheets to determine material type and size. Read detailed production orders to determine product specifications including dimensions and tolerances., • Work with a variety of materials to include, but not limited to, raw pipe of varying sizes, bar stock, flanges, flat bars and sheet metal part template., • Potentially move for a short period of time to the Italian Headquarter facility for training with each internal department, mastering the overall concept of practice., • Other duties as assigned. Requirements and Qualifications: • High school graduate. Welding school or technical courses preferred., • 1-3 years’ work experience preferred., • 1-3 years’ experience TIG and MIG welding, • Must have valid proof of eligibility to work in the USA., • Bilingual English/Spanish speaking is a plus., • Open availability to travel both within the USA and internationally. Physical Demands • While performing this job, the successful candidate will be regularly required to stand; use hands to finger, handle, or feel; and reach with hands and arms. The employee frequently is required to walk and stoop, kneel, crouch, or crawl. The employee is occasionally required to climb., • The employee must occasionally lift and/or move up to 50 lbs. The employee must occasionally push and/or pull a maximum force of 200 ft-lb.Company DescriptionToday’s job market is ultra-complex. Placing just the right people into just the right jobs doesn’t happen by chance. It’s a science. At PrideStaff, we’ve mastered the art of staffing to help our clients and candidates achieve their goals. Whether you’re a company looking for a true partner, or a job seeker looking to land a new position, PrideStaff experts eliminate guesswork and get results.Today’s job market is ultra-complex. Placing just the right people into just the right jobs doesn’t happen by chance. It’s a science. At PrideStaff, we’ve mastered the art of staffing to help our clients and candidates achieve their goals. Whether you’re a company looking for a true partner, or a job seeker looking to land a new position, PrideStaff experts eliminate guesswork and get results.

Job DescriptionVessel Welder- Shop Work- Local Job Title: Vessel Welder Job Description We are seeking skilled vessel welders to join our team. You will be responsible for welding on storage tanks, spheres, and water towers, ranging from 23ft to 43ft. The primary welding techniques used include stick and flux core, with occasional use of MIG welding. You will be working on carbon steel up to 3 inches thick, and knowledge of back gouging is essential as these are 100% X-ray welds. Responsibilities • Perform welding on storage tanks, spheres, and water towers., • Utilize stick and flux core welding techniques, with some MIG welding., • Work with carbon steel materials up to 3 inches thick., • Execute back gouging for 100% X-ray welds., • 3+ years of experience as a vessel welder., • Ability to pass 2G and 3G weld tests., • Proficiency in flux core and stick welding., • Experience with vessel components and fabrication., • Any fitting experience is a plus., • Ability to read prints and isometric drawings., • Experience fabricating storage tanks, vessels, and towers., • Ability to do own layouts and fit-ups. This position offers a long-term opportunity in a very safe working environment. We prioritize the safety and well-being of our employees, providing a stable and secure workplace. Job Type & Location This is a Contract to Hire position based out of Houston, TX 77064. Pay and Benefits The pay range for this position is $27.50 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionJob Title: Vessel WelderJob Description We are seeking skilled vessel welders to join our team. You will be responsible for welding on storage tanks, spheres, and water towers, ranging from 23ft to 43ft. The primary welding techniques used include stick and flux core, with occasional use of MIG welding. You will be working on carbon steel up to 3 inches thick, and knowledge of back gouging is essential as these are 100% X-ray welds. Responsibilities • Perform welding on storage tanks, spheres, and water towers., • Utilize stick and flux core welding techniques, with some MIG welding., • Work with carbon steel materials up to 3 inches thick., • Execute back gouging for 100% X-ray welds., • Operate overhead cranes as required.Essential Skills, • 3+ years of experience as a vessel welder., • Ability to pass 2G and 3G weld tests., • Proficiency in flux core and stick welding., • Capability to perform back gouging.Additional Skills & Qualifications, • Experience with vessel components and fabrication., • Any fitting experience is a plus., • Ability to read prints and isometric drawings., • Experience fabricating storage tanks, vessels, and towers., • Ability to do own layouts and fit-ups. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Houston,TX 77064. Application Deadline This position is anticipated to close on Mar 31, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Description About Austin Industrial Austin Industrial provides premier self-perform maintenance, construction, and soft craft service to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries. To learn more about us, visit . Welder Foreman The purpose of this job is to provide supervision and coordination of workers (both skilled and unskilled) engaged in various types of construction projects, such to join metal parts, such as pipe or metal plates as specified by layout, blueprints, work orders, welding procedures or oral instructions through the application of heat or electric arc-welding equipment, etc. The goals of this position include scheduling work to meet timetables in a safe manner, per the plans and specifications, and to meet estimated cost. This position may be required to maintain a good working relationship with inspectors, developers, vendors, subcontractors, etc. Other duties may be assigned. Supervisory Responsibilities * Indirectly supervises the work of welders in the Operations Department. * Carries out supervisory responsibilities in accordance with the Austin Industrial's policies & procedures and applicable laws. * Responsibilities include interviewing, hiring, and training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. Competencies * Perform the job successfully, an individual should demonstrate the following competencies. * Problem Solving - Identifies and resolves problems in a timely manner; gathers and analyzes information skillfully; develops alternative solutions; works well in group problem solving situations; uses reason even when dealing with emotional topics. * Other duties as assigned. Functional Areas of Responsibility * Manage a small amount of onsite equipment fleet * Recruit hourly trade personnel * Execute "Look Ahead" schedules * Manage craftsmen, equipment, and material resources * Logistics planning * Execute project Work Plans * Work crews productively and efficiently; meet daily cost objectives * Training * Purchasing of unincorporated materials, tools, supplies * Safe workplace * Quality of work Specific Duties and Responsibilities: * Performs daily construction surveillance at project site, including welding, structural and civil inspections. * Observe and report construction progress. * Writes daily reports based on observations made. * Reports discrepancies to Project Manager. * Coordinates code compliance inspections per client specifications and State laws. * Maps welds to be performed. * Flags welds for Non-Destructive Examination (NDE) * Performs NDE's when required * Fully inspects all welds prior to and immediately after hydro. * Witness hydro of welded piping and/or vessel - Effectively interfaces with client QA personnel Planning * Review contract documents, submittals, shop drawings, and schematics to determine the nature and scope of the work, the materials to be utilized, and manpower requirements (by craft) for each construction phase * Execute Work Plans for major components of work and monitor adherence to Work Plans * Execute established procedures for the ordering self-perform materials, supplies, and small tools from approved suppliers. Ensure timely requisition is made for needed materials and equipment. * Applicants must be legally authorized to work for ANY employer in the United States. Austin is unable to sponsor or take over sponsorship of an employment visa for this position. Cost Performance * Monitor daily labor costs and production rates for accuracy and conformance with established budgets. Take corrective action to improve productivity when labor costs exceed expected norms. * Encourage craftsmen to develop innovative methods for increasing efficiency, productivity, and profitability in their particular operation and to provide feedback and coaching on how the work is proceeding * Execute hourly time card reporting * Maintain all equipment assigned to crew and conduct preventive maintenance training for operator(s). Also responsible for various hand tools and the proper storage of all equipment at the end of each day. Scheduling * Provide a detailed construction plan for each day and general plan for one week. Manage work to stay within schedule. * Manage scheduling of all QA/QC inspections of work necessary to obtain owner acceptance of the work. Quality Management Ability to manage crew into an effectively coordinated working unit, promoting a motivating atmosphere * Foster and promote the training and development of subordinates through various on-the-job training opportunities, company-sponsored training programs * Recommend personnel actions, such as promotions, discharges, disciplinary measures, initiate and suggest plans to motivate workers to achieve goals * Supervise the work of subcontractors to ensure compliance with plan, specifications, and schedules. Safety * Conduct Tool Box and JHA Safety Meetings with employee-owners to instruct them on topics for accident prevention * Enforce all safety regulations and company policies, and is constantly alert to all safety conditions. Technical * Investigate alternative work methods and materials to improve efficiency and work quality; works to resolve issues * Ensure compliance with plans and specifications * Perform a variety of tasks associated with project completion, including closeout punch lists, demobilization, etc. * Maintain a detailed and accurate daily report of all activity associated with field construction activities * Ensure that equipment is being used for its intended purpose in the correct manner * Interpret company policies to workers and disseminates Equal Employment Opportunity Policy by covering these topics in conjunction with Safety Meetings * Conduct on-the-job training for qualified personnel and records and reports hours on Foreman's Daily Control * Fill out Foreman's Daily Control correctly with employee-owners' hours, job number, cost codes, quantities, etc. * Other duties as assigned. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit; use hands to finger, handle, or feel and reach with hands and arms. The employee is frequently required to stand; walk; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and taste or smell. The employee must regularly lift and /or move up to 25 pounds and may frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. Qualifications Required for this Position : To inspect welds must be an AWS CWI or ASNT Level II Technician. Flags welds for Non-Destructive Examination (NDE) Must be familiar with * PT (Liquid Penetrant Testing) * VT (Visual Testing) * UT (Ultrasonic Testing) * RT (Radiography Testing) * MT (Magnetic Particle Testing) Education - no minimum education requirements. Experience - 5+ years of Industrial and Supervisory experience preferred Certifications/ Licenses: NCCER, a valid Driver's License and TWIC Card. Austin Industrial is an Equal Opportunity Employer. See the "Know Your Rights" poster available in English () and Spanish () . No Third-Party Inquiries Please This Company does not accept and will not consider unsolicited resumes or any other unsolicited candidate information submitted to the Company or any of its employee-owners by staffing agencies, search firms, or third-party recruiters in response to a posted vacancy. The Company will not pay any placement fee(s) without a written agreement to do so ( i.e. , payment must be required pursuant to the terms of a written agreement). Any unsolicited resumes or candidate information submitted to this Company or any of its employee-owners becomes the property of the Company. Accessibility Note If you are a job seeker with a disability and require a reasonable accommodation to apply for one of our jobs or have accessibility concerns, please contact the People Services Team at (877) 831-1217. Qualifications Licenses & Certifications Required * TWIC Card * Valid Driver's License Experience Required This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights () notice from the Department of Labor.

Welder Job Duties: Expertly welds small, medium, and large bore pipe of various metals and alloys.

Welder Job Duties: Expertly welds small, medium, and large bore pipe of various metals and alloys.

Job Description Custom Air Products & Services, Inc. is an aggressively growing company always looking for qualified individuals with a strong work ethic, a commitment to excellence and a desire to join a winning team. We have been proudly serving the Houston and surrounding areas, providing quality service and customized installation of commercial and industrial HVAC systems. Job Description: Work under the supervision of the Lead Welder to complete brazing on copper pipes according to specified standards. Plan, lay-out, weld, install test and repair all types of copper pipe in accordance with all applicable plans, specifications, codes, and industry standards. Job Duties: • Regarding that portion of the work assigned, develop complete understanding of contract plans and specifications. Plan, lay-out, install and/or repair all types of copper pipe in accordance with those plans and specifications., • Follow established job-site safety and regulations and maintain a safe and clean work area. Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards., • Use appropriate hand and power tools to properly measure, cut, assemble, braze, and install all types of copper pipe., • Tests installed piping systems and install all other related items in accordance with the applicable plans and specifications., • Bolt, clamp or braze parts to secure in position for brazing; braze components according to specific process and code., • Install all other items in accordance with the applicable plans and specifications., • 1 Year brazing copper

Job Description Lead Welder/Fabricator Founded in 1934, Griffin Fluid Management is the leader in dewatering and groundwater control. We are guided by an unwavering commitment to our core values and we aim to lead the dewatering and groundwater control industry through a continual improvement process, leading to our profitable growth. We diligently cultivate relationships with clients to help determine their dewatering, groundwater control and pumping related needs, tailor an engineered, cost–effective, first–class solution to meet the needs and deliver the solution in a safe, timely, courteous and professional manner. We recognize that our past and future success heavily relies on the efforts of our empowered, knowledgeable, experienced, dedicated and valued employees. We constantly strive to build lasting relationships with our clients and stakeholders through integrity, respect and performance providing a solid foundation for all of our projects. More information about our company is available at or by following us on LinkedIn. Job Purpose If you are a great employee, looking for a great Company, then come join our Team! The lead welder/fabricator reports directly to the GPE Vice President and will fabricate new and provide preventative and repair services to current equipment owned by Griffin. This may include work on both electric and diesel-powered equipment, engines, centrifugal pumps, vacuum pumps, pipe, fittings, etc. Duties & Responsibilities · Complete all daily reporting and project specific paperwork daily. · Set daily project progress goals, in accordance with project labor budget, for crew and report progress or issues to Floor Manager. · Ensure all work is being performed safely, site safety procedures are being followed, all Griffin personnel are utilizing proper PPE, and all work is being performed in accordance with Griffin’s SOPs. · Effectively communicate with and supervise co-workers. · Determine the appropriate welding equipment or method based on requirements. · Operate angle grinders to prepare the parts that must be welded. · Align components using calipers, rulers etc. and clamp pieces for welding together. · Weld components in various positions (vertical, horizontal or overhead). · Repair machinery and other components by welding pieces and filling gaps. · Test and inspect welded surfaces and structure to discover welding flaws. · Maintain equipment in a condition that does not compromise safety. · Complete daily paperwork including equipment tear down reports, inventory reconciliations, equipment repair estimates, material list outbound and inbound checks. · Assist the Floor Manager in training and maintaining an effective workforce. · Safe operation of hand and power tools, pumps, welding machines, and electrical equipment. · Safe operation of diesel and electric powered lifting equipment. · Follow directives accurately and efficiently. Skills · Proven experience as welder and fabricator. · Experience using a variety of welding equipment and procedures (MIG, TIG, MMA etc.) · Experience in using electrical or manual tools (saws, squares, calipers etc.). · Welding, up to ½” steel, aluminum, & stainless steel, flat and round. · Metal preparation (torch, plasma, drill press, band saw, grinders, etc). · Measuring / assembling. · Knowledge of relative safety standards and willingness to use protective clothing (face-shield, gloves etc.). · Deftness and attention to detail. · Proficient in English. Qualifications/Requirements · Legal to work in US. · Pass required drug and background screens. · Minimum High School diploma, GED or equivalent. · Minimum 3-5 years’ experience of welding and fabricating. Preferred Experience · 5+ years’ welding experience. · Read blueprints and drawings and take or read measurements to plan layout and procedures · Welding certificates · Pump repair experience · OSHA 10 Certified. · TWIC Card · Valid driver’s license and safe driving record · Ability to read and interpret technical documents and drawings Physical Demands · Ability to stoop, kneel, bend and stand. · Must be able to lift 50 - 80 pounds daily. · Must be able to load, unload, and move large equipment and tools. · Continuous walking, stair climbing, and lifting. Compensation · Title and/or Salary may be adjusted based experience or skills All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Job Description Position Summary: This position is primarily responsible for a certified welder for welding and assembly/fabrication of Headworks products for the water industry. Essential Job Functions • Performs MIG or TIG welding duties, • Welds steel and stainless steel fabricated parts consistent with Headworks standards and specifications., • Records all time on the appropriate job orders at a high degree of accuracy., • Performs all job duties at a high level of efficiency and with minimal rework., • High School Diploma or equivalent., • Proficient at MIG and or TIG welding processes., • Must have 3+ years TIG/MIG welding (including using a turntable) of Pipe and structural components., • Has passed at least one of HWI’s approved AWS D1.6 welding qualification tests and understands fabrication drawings., • Able to read drawings, weld notations, and fabricate parts to specification. Headworks® is an equal opportunity employer, offering a great work environment, challenging career opportunities, professional training and competitive compensation. Our shop employees have Fridays off. The work days are Monday through Thursday, 10 hours plus lunch break each day.

Job DescriptionSalary: Work Authorization No calls or agencies please. Tranter will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. Equal Opportunity Employer Tranter is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment. Inclusion & Diversity: At Tranter-LHE Group, we strive for a true inclusive environment where everyone is encouraged to be the best version of themselves and bring their distinct aspects of diversity to the workplace. Tranter-LHEs Vision is to create an inclusive workplace where diversity is essential to achieving the companys objectives. We believe that diversity maximizes the potential of all individuals and the organization. Job Summary:A Welder, or Brazer, is responsible for assembling pieces of metal together or repairing damage in metal components using heavy machinery that emits high heat, melting the metal into shape. Accountabilities: • Follow HSE (Health, Safety and Environment) regulations and policies, • Follow and provide input to all work instructions, • Achieve team goals and objectives for achievement of operational results: Safety; Quality; Delivery; and Productivity (SQDP), • Follow and provide input to the lean enterprise system in all phases of the production process, • Meet the department objectives/KPIs Principle Duties and Responsibilities: • Must maintain required ASME Welding certifications., • Repairs and fabricates various items and equipment using cutting, burning, and welding techniques and equipment., • Ability to apply ASME code quality welds using all types of metals (stainless steel, carbon steel, titanium, etc.), • Read blueprints and drawings and take or read measurements to plan layout and procedures prior to starting a project, • Determine the appropriate welding equipment or method based on requirements, • Obtain the materials to be used in the project, • Set up components for welding according to specifications, cut material with hand tools (powered and manual) as required to meet requirements., • Prepare joints properly prior to welding., • Layout job as required using calipers, rulers etc. and clamp pieces., • Properly prepare, assemble, and tack weld parts and surfaces to be welded., • Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal or overhead), • Properly follow assigned WPS., • Monitors the welding, burning, and fitting process to ensure parts are not overheated or damaged by warping, distortion, expansion, or shrinkage., • Checking finished work to make sure that it falls within the tolerances marked on the blueprints, • Perform VT/PT on work to identify any flaws., • Maintain equipment in a condition that does not compromise safety and ensures continued proper functionality (preventive maintenance), • Repair machinery and other components by welding as needed., • Maintains, organizes, and cleans equipment and the work area., • Notifies supervisor when faulty equipment or defective materials are discovered, • Work overtime as needed, • Other duties as assigned Skills/Competencies Required: • Must pass 3G plate test and 6G pipe test (to be considered for hire)., • Proven experience as an ASME code welder, • Must consistently demonstrate code quality work., • Ability to make proper code weld repairs., • Thorough understanding of machines and tools used in welding including designs, uses, maintenance and repair., • Basic understanding of design techniques, principles, and tools necessary for the precise production of technical plans, drawings, models and blueprints., • Ability to read and interpret technical documents and drawings, • Knowledge of relative safety standards and willingness to use required protective clothing (face-shield, gloves etc.), • Attention to detail, • Basic understanding of mathematics as related to welding assignments, • Effectively communicate with internal and external business partners, English preferred, • Maintain compliance with organizational Core Values, • Exhibit and develop organizational Leadership Competencies, • Comply to Production SOPs, • Work effectively in a team-based environment Education, Qualifications and Experience: • 3 years welding experience preferred, • High School Education, diploma, or equivalent, • Must pass 3G plate test and 6G pipe test as a condition of employment or internal move into this role., • LEAN experience in manufacturing environment, • Experience using a variety of welding equipment and procedures (GTAW, GMAW, FCAW, etc.), • Experienced in welding various metals (e.g. stainless steel, carbon steel, titanium, etc.), • Experience in using electrical or manual tools (saws, squares, calipers etc.) Physical Requirements: • Must be able to sit/stand/walk for up to 10 hours/day, • Must be able to weld components that are vertical, flat, or overhead., • Must have enough manual dexterity and stability as required for precision work., • Must be able to see details at close range., • Must be able to lift up to 50 pounds at times., • Must be able to traverse facilities and machinery by climbing, balancing, lifting, walking, stooping, and carrying materials

Job DescriptionDescription: About U.S. Bellows U.S. Bellows, a division of Piping Technology & Products, Inc. (PT&P), is a leading manufacturer of engineered expansion joints and bellows for piping systems. Serving industries such as oil & gas, power generation, and chemical processing, U.S. Bellows is known for precision fabrication, quality workmanship, and reliable solutions that protect critical infrastructure. Position Summary The Fitter/Welder – TIG & Flux Core is responsible for fitting, aligning, and welding metallic bellows, expansion joints, and related components in accordance with engineered drawings, Welding Procedure Specifications (WPS), and applicable codes. This role requires strong fitting skills, proficiency in TIG and Flux Core welding, and a high level of attention to detail to produce high-quality, code-compliant assemblies. Key Responsibilities • Fit, assemble, and weld bellows and expansion joint components, including convolutions, pipe ends, flanges, liners, and hardware, • Read and interpret fabrication drawings, blueprints, weld symbols, tolerances, and specifications, • Perform proper fit-up for welding, including joint preparation, alignment, and root openings, • Weld using GTAW (TIG) and FCAW (Flux Core) in accordance with approved WPS, • Produce high-quality, multi-pass welds meeting ASME and customer requirements, • Measure, mark, cut, grind, and prepare materials for fabrication, • Maintain required preheat and interpass temperature controls when applicable, • Support and pass NDE inspections (PT, MT, RT, UT as required) and perform approved weld repairs, • Verify dimensional accuracy and alignment before and after welding, • Safely operate hand tools, power tools, fixtures, forklifts, and overhead cranes, • Complete travelers, weld logs, and traceability documentation, • High school diploma or GED required, • Must pass company-administered welding and fitting tests, • Must pass company-administered measuring tape skills test, • 3+ years of welding and fitting experience in a manufacturing or fabrication environment, • Proficient in TIG (GTAW) and Flux Core (FCAW) welding, • Experience welding carbon steel and stainless steel (Inconel a plus, if applicable), • Ability to read, write, and interpret fabrication drawings and production documentation in English, • Strong attention to detail, safety awareness, and teamwork skills, • Ability to stand for prolonged periods (8+ hours), • Ability to lift, push, pull, or carry up to 50 lbs independently, • Frequent bending, stooping, reaching, and manual handling of materials, • Good hand-eye coordination and manual dexterity, • Visual acuity to read measuring tools, drawings, and identify weld or fit-up defects, • Ability to wear required PPE, including steel-toe boots, gloves, safety glasses, and hearing protection Manufacturing shop environment with exposure to moving mechanical parts, sharp materials, heat, dust, and moderate to loud noise. Work schedules may include overtime or weekend shifts based on production demands.

Job Description Overview We are seeking a skilled Structural Welder to join our team. The ideal candidate will have extensive experience in welding and fabrication, with a strong focus on safety and quality. As a Structural Welder, you will be responsible for constructing and repairing metal structures, ensuring compliance with industry standards and specifications. Your expertise in various welding techniques and tools will be essential in delivering high-quality workmanship on construction projects. Responsibilities • Perform MIG, TIG, FCAW, and stick welding on various materials including sheet metal and structural steel., • Read and interpret blueprints, schematics, and technical drawings to determine project specifications., • Utilize hand tools, power tools, and welding equipment to fabricate and assemble metal components., • Conduct inspections of completed work to ensure adherence to ASME codes & standards., • Operate cranes and forklifts safely to move materials and equipment as needed., • Execute pipe threading, ductwork installation, and other mechanical tasks as required., • Maintain a clean and organized work area while adhering to safety protocols at all times., • Proven experience in construction site environments with a focus on welding and fabrication., • Proficiency in using calipers, micrometers, plasma cutting equipment, press brake machines, and other machining tools., • Strong mechanical knowledge with the ability to perform basic math calculations related to measurements and angles., • Familiarity with rigging techniques for lifting heavy materials safely., • Ability to work independently as well as part of a team in a fast-paced environment., • Excellent attention to detail with a commitment to producing high-quality work., • Previous experience in manufacturing or assembly roles is preferred but not mandatory. Join us in building the future through your skills as a Structural Welder!

Job Description Job Position: Metal Fabrication Location: Houston, TX 77017 Pay Rate: $24.00/hr Shift: 1st Description: Sheet Metal Fabricator / Welder III Responsible for the layout, fit-up, fabrication, and welding of moderate to complex structural and sheet metal components. This role requires the ability to interpret technical drawings and fabricate both heavy structural weldments and precision sheet metal parts while maintaining tight tolerances and quality standards. Key Responsibilities Layout, fit, and fabricate structural steel and sheet metal components using blueprints and technical drawings Perform tack welding and full welding of structural weldments using GMAW (MIG), FCAW (Flux Core), and GTAW (TIG) processes Fabricate components from light gauge sheet metal to heavy plate up to 2 inches thick Work with angle, pipe, tube, structural shapes, and sheet metal assemblies Cut, shape, and form sheet metal using equipment such as press brakes, shears, rollers, and ironworkers Perform bending, forming, punching, and layout work for sheet metal components Generate cut lists, stretch-outs, and flat pattern developments from prints Read and interpret blueprints, weld symbols, fractional and decimal dimensions, and work to specified tolerances Weld carbon steel, alloy steel, and stainless-steel components (aluminum welding experience is a plus) Inspect finished work to ensure it meets dimensional and quality requirements Grind, finish, and prepare weldments for final inspection or painting Set up and operate fabrication tools and welding equipment safely and efficiently Maintain a clean and organized work area while following all safety procedures Assist with assembly and installation of fabricated components when required Qualifications 7+ years of fabrication and welding experience (structural and/or sheet metal fabrication preferred) Experience with MIG, Flux-Core, and TIG welding processes Strong ability to read and interpret technical drawings and weld symbols Experience operating press brakes, shears, rollers, and other sheet metal fabrication equipment Familiarity with AWS welding codes and quality standards Ability to work with both light gauge sheet metal and heavy structural steel Strong measuring and layout skills Welding certification preferred Technical training or trade school education a plus High School Diploma or GED preferred but not required Must be able to pass a weld test in all required processes Must have strong Math Skills Must be able to pass drug screen and background case by case 7 years Pay DOE 24+ #38206649 @IN2049 @ZR5049 @TAL5049 Company DescriptionA True Partner in Your Success: Ascend staffing has been connecting great people with great opportunities for over 50 years. Many of our talented workers stay with us for years because they like what they get from Ascend. What We Offer: Weekly Pay Direct Deposit and Debit Card Payment Options Medical, Dental, and Vision Coverage Life and Short-term Disability Insurance Our Purpose Statement: Our purpose is to partner with employees, clients, and the community to create opportunities for growth and mutual success. The Ascend Difference: We do what we say we will do. We are direct and transparent. We find real opportunities with great employers. We support our talent every step of the way. We make a difference in people’s lives. How We Help You: Our recruiters aren’t just about filling jobs. They are about helping you achieve your goals. We put thousands of people to work every year in temporary, temporary-to-hire and direct hire placements. We are always looking for great people. Apply today!A True Partner in Your Success:\r\nAscend staffing has been connecting great people with great opportunities for over 50 years. Many of our talented workers stay with us for years because they like what they get from Ascend. \r\n\r\nWhat We Offer:\r\nWeekly Pay\r\nDirect Deposit and Debit Card Payment Options\r\nMedical, Dental, and Vision Coverage\r\nLife and Short-term Disability Insurance\r\n\r\nOur Purpose Statement:\r\nOur purpose is to partner with employees, clients, and the community to create opportunities for growth and mutual success.\r\n\r\nThe Ascend Difference:\r\nWe do what we say we will do.\r\nWe are direct and transparent.\r\nWe find real opportunities with great employers.\r\nWe support our talent every step of the way.\r\nWe make a difference in people’s lives.\r\n\r\nHow We Help You:\r\nOur recruiters aren’t just about filling jobs. They are about helping you achieve your goals. We put thousands of people to work every year in temporary, temporary-to-hire and direct hire placements.\r\n\r\nWe are always looking for great people. Apply today!

Job Description Pipefitter / Industrial Pipe Technician (Night Shift) Houston, TX $25–$35/hour + 10% Shift Differential Full-Time | Night Shift | Overtime Available Schedule: Monday–Saturday | 6:00 PM – 5:30 AM About the Opportunity We are hiring experienced Pipefitters / Industrial Pipe Technicians to join a high-performance manufacturing team in Houston. This role is ideal for skilled professionals with strong blueprint reading and fabrication experience who are comfortable working night shifts and long hours. You’ll play a key role in building and assembling piping systems used in industrial applications, with consistent overtime and competitive pay. Key Responsibilities • Select proper pipe types, sizes, and materials based on specifications, • Cut, thread, and bend pipe using hand tools, cutting equipment, and pipe machines, • Assemble and install metal and non-metal piping systems (including steel and stainless steel), • Interpret blueprints, P&IDs, and technical drawings to execute builds accurately, • Perform MIG welding setups and assist with fabrication as needed, • Manage and track material inventory; coordinate with warehouse for replenishment, • Support inventory audits and maintain accurate material records, • Maintain a clean, organized workspace following 5S standards, • Follow OSHA safety standards and company safety procedures at all times, • Participate in safety training and proactively identify/report hazards Required Qualifications • 5+ years of pipefitting experience in a manufacturing or industrial environment, • Ability to read and interpret blueprints and pipe & instrumentation drawings (P&IDs), • Strong knowledge of pipe schedules, materials, and fittings, • Experience using pipe cutting, threading, and bending equipment, • Basic MIG welding setup experience, • Proficiency with hand tools, power tools, and measuring devices, • Solid math skills for measurements and layout, • Strong attention to detail and quality workmanship, • Good communication skills (English, written and verbal) Preferred Qualifications • Technical training or certification in pipefitting, • Experience with automated pipe fabrication equipment, • Forklift or crane certification, • Familiarity with lean manufacturing principles, • Advanced fabrication and installation experience Work Environment & Physical Requirements • Manufacturing/shop environment (non-climate controlled), • Standing for extended periods (10+ hours per shift), • Frequent lifting up to 50 lbs, • Regular bending, reaching, twisting, kneeling, and climbing as needed, • Required PPE: safety glasses, steel-toe boots (hearing protection recommended) Compensation & Schedule • $25–$35/hour, based on experience, • +10% shift differential (night shift), • 11–12 hour shifts, Monday–Saturday, • Consistent overtime available To apply send your resume to or call 346-550-6374! Company DescriptionAt KODIAK, we are dedicated to helping craft professionals build successful and rewarding careers in the construction industry. Whether you’re an experienced electrician, welder, millwright, or you’ve honed your skills in another trade, we can provide access to steady local and travel-dedicated employment, competitive pay, and opportunities to work on large-scale, high-profile construction projects across the U.S.At KODIAK, we are dedicated to helping craft professionals build successful and rewarding careers in the construction industry. Whether you’re an experienced electrician, welder, millwright, or you’ve honed your skills in another trade, we can provide access to steady local and travel-dedicated employment, competitive pay, and opportunities to work on large-scale, high-profile construction projects across the U.S.

Job Description Area Zip Code 77045 Job description: MIG and FLUX 6g Welders Pay - $26 - $36 - Night shift Hours - 60+ South Houston - Fabrication Shop POSITION OVERVIEW: The Pipe Welder is responsible for various types of weld preparations, welding and weld finishing operations to manufacture product to customer drawings, specifications, or other forms of instruction. KEY JOB RESPONSIBILITIES: Proficient in assigned welding techniques Interpretation of mechanical drawings, including the ability to read weld symbols Knowledge of wire and filler materials applications for various steel alloys, aluminum, and some exotic materials Working knowledge of fixturing and weld set up parameters (amps, volts, etc.) Conventional and precision measuring instruments Process inspection, certification, and documentation Welding equipment maintenance and inspection Finish grinding applications using manual and power tools Safety and Housekeeping Other duties as assigned by the area supervisor Text 346-870-9966 or send your email to Job Type: Full-time Work Location: In person Company DescriptionAt KODIAK, we are dedicated to helping craft professionals build successful and rewarding careers in the construction industry. Whether you’re an experienced electrician, welder, millwright, or you’ve honed your skills in another trade, we can provide access to steady local and travel-dedicated employment, competitive pay, and opportunities to work on large-scale, high-profile construction projects across the U.S.At KODIAK, we are dedicated to helping craft professionals build successful and rewarding careers in the construction industry. Whether you’re an experienced electrician, welder, millwright, or you’ve honed your skills in another trade, we can provide access to steady local and travel-dedicated employment, competitive pay, and opportunities to work on large-scale, high-profile construction projects across the U.S.

Job DescriptionPer Diem Pipe Welder Newport News, VA / Goose Creek, SC $140 per diem! + $50/hr Job Description As a Pipe Welder, you will perform welding processes on aluminum and steel parts and assemblies to required tolerances, using various welding metals and metal alloys. You will determine layouts and weld parts and assemblies according to engineering drawings and specifications. Quality monitoring and verification may also be part of your responsibilities, ensuring all work aligns with statistical process or other control procedures. Responsibilities • Perform welding processes on aluminum and steel parts and assemblies to required tolerances., • Determine layouts and weld parts and assemblies according to engineering drawings and specifications., • Proficiency in welding processes on aluminum and steel parts and assemblies., • Ability to determine layouts and perform welding according to engineering drawings., • Submarine or carrier experience. This is a Contract position based out of Houston, TX. Pay and Benefits The pay range for this position is $50.00 - $50.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Houston,TX. Application Deadline This position is anticipated to close on Apr 10, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description We are seeking an experienced Pipe Welder to perform fit-ups and pressure-containing welds on carbon steel pipe and fittings in a fast-paced production shop environment. Candidates must have strong welding experience and the ability to produce high-quality, code-compliant welds. Duties and Responsibilities • Read and interpret work orders, modification procedures, and weld procedures., • Perform fit-ups, structural welds and pressure containing welds on carbon steel pipe and fittings, • Weld procedures including GMAW, FCAW, GTAW, SAW, • Welder qualification required as part of application process., • Familiar with ASME code requirements a plus., • Able to produce “x-ray quality” welds., • Able to read and interpret Prints, WPS, Specifications, Work Instructions., • Fabrication & Mechanical skills a plus., • Ability to stand, crouch, bend for 8-10 hour shifts., • Must be able lift up to 40 Lbs. on occasion., • Basic computer skills., • Experience operating a forklift., • Problem solving skills., • Ability to work as a team., • Strong attention to detail., • High School or GED required., • Minimum 5+ years of welding/fabrication experience., • Must be able to read, write and speak English.

Job Description About the Job We are seeking skilled and motivated Pipefitters/Welder to join our growing team. In this role, you’ll install, assemble, and maintain piping systems for industrial, commercial projects. We’re looking for dependable professionals who take pride in quality workmanship, safety, and teamwork. Qualifications * Welding experience * Minimum [2] years of pipefitting experience required. * Strong understanding of pipe materials, fittings, and installation techniques. * Valid driver’s license and reliable transportation.

Must have experience welding multiple types of pipe including, but not limited to carbon steel, stainless steel, and chrome. Must be qualified on GTAW, GMAW and FCAW processes on 2" and above pipe in all positions.

Will assist in all areas of the Pipe & Metal hose shop including machine shop, fitting, Hydro test, inspection and related product. Industrial TIG Pipe welding experience required. The successful candidate will use various tools and/or machines to weld or fit Pipe.

The welder's job duties are to properly weld structure or pipe to construct a drilling deck. Perform welding processes assigned for structural, pipe, and welding projects. Expertly weld small, medium, and large structural and pipes of various metals and alloys.

As a Pipe Welder you are responsible for fabricating, installing, and repairing piping systems that transport fluids and gases throughout marine vessels. This role involves reading and interpreting blueprints, schematics, and work orders to accurately weld various pipe types, including carbon steel,

This role involves reading and interpreting blueprints, schematics, and work orders to accurately weld various pipe types, including carbon steel, stainless steel, and copper-nickel, in challenging conditions such as confined spaces and at heights. The welder must use methods like TIG, MIG, and stic

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

PrideStaff - - Responsibilities: Unload Containers; Move Product to Warehouse.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Golden Nugget - - Responsibilities: Execute assigned tasks and projects within given time frame; Keep logs and records up to date prior to shift completion; Respond to guest or management work requests promptly and record actions taken; Report maintenance requests not completed by end of shift; Uti

Advance Services Inc - - Responsibilities: Loading and unloading material by hand onto pallets; Loading raw material into the batch operation for manufacturing; Assisting on the production line as well as shipping and receiving; Operate equipment and machinery which may include Forklifts; Shift wor

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Advance Services Inc - 1530 West Sam Houston Parkway South - Responsibilities: Maintain and repair production equipment (die cutters, web and sheet-fed presses, inserting machines, folders, conveyor systems, and bindery equipment); Perform mechanical and electrical troubleshooting; Ensure optimal pe

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Avenue5 Residential - - Responsibilities: Perform repairs to electrical, plumbing, appliances, flooring, carpentry, HVAC, and grounds maintenance as directed; Carry out general carpentry tasks such as wallboard repair, countertop/cabinet replacement, finish carpentry, window/glass repair, door/lock

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Aerotek - - Responsibilities: Operate forklifts, side-loaders, and overhead cranes to move heavy metal and products within the manufacturing environment.Track and manage inventory as parts are moved across different departments.Ensure accuracy in part placement and delivery.Assist in shipping and r

Crane Worldwide Logistics - 13320 John F.Kennedy Boulevard - Responsibilities: Sign off bill of lading (BOL); Cross check packing list, picking, put away; Loads and unloads materials onto or from pallets, trays, racks, and shelves by hand forklift, or other warehouse equipment; Scans freight via war

FedEx - - Responsibilities: Operate equipment for movement of packages and pallets; Assist in buildup and breakdown of pallets containing heavyweight freight; Communicate effectively in noisy environment; Maintain safety and adhere to drug screening requirements; Complete training and possess valid

Crane Worldwide Logistics - 1500 Rankin Road - Responsibilities: Check vendor accuracy and create bill of ladings; Validate cargo is undamaged and label correctly; Operate forklift and other warehouse equipment; Load and unload materials and secure with straps; Scan freight using warehouse managemen