Trabajos product testing en Cicero, New YorkCrear alertas

Job DescriptionReceiving Operations Driver Why Byrne At Byrne, we foster a culture built on teamwork, excellence, and professionalism. Our greatest strength lies in the exceptional talent and dedication of our team members across every part of the organization. We value their contributions and ensure they’re recognized, rewarded, and compensated in ways that reflect their impact and expertise. Pay and Benefits • Hourly Range – $31.00 - $42.00 per hour, • Competitive bonus programs, • Medical, Dental, Vision benefits available day 1 of employment, • Supplemental benefits available on day 30 of employment, • Eligible for 401 (k) with a company match available on day 90 of employment, • Educational Support via tuition reimbursement and scholarship program Work Shift and Location 6750 Benedict Road W East Syracuse, NY 13057 Tuesday – Saturday 7pm-End of Shift Job Overview The CDL-A Bulk Tank Wash Tech plays a key role in executing assigned Bulk Tank tasks. This includes cleaning equipment such as pumps and valves, using drop-in spray balls, brushes, and tools necessary to properly clean the interior and exterior of tank trailers, product pumps, and hoses. Key Responsibilities • Clean all tractors, tanks, milk pumps, tools, and equipment., • Ensure each tank is ready for operation, including proper reinstallation of milk pumps., • Receive, test, and determine compliance with all incoming raw dairy and cream trucks, bulk sugars, oils, and CIP chemical trucks., • Wash the outsides of cream trucks and maintain valves and gaskets on trucks., • Manage farm samples as required by the site., • Monitor silos for testing and proper rotation by coordinating with shift managers/supervisors., • Maintain cleanliness of alcove rooms, CIP room, tanker bays, and raw lab per cleaning checklists., • Verify, inspect, and maintain cleanliness of tankers, silos, tanks, and lines., • Disassemble and assemble sanitary lines and CIP equipment, and monitor CIP systems., • Maintain raw material records in accordance with company procedures and regulatory requirements., • Monitor and ensure quality standards for all products being received and tested., • Identify and label any foreign materials found during unloading or inspecting in-line screens., • Maintain the Receiving Log for the shift worked., • Always assist and maintain professionalism with tanker drivers., • Maintain communication between additional departments, promoting excellent customer service., • Demonstrate the ability to operate the internal HMI system. Min. Qualifications • A minimum GED or High School diploma is required., • Must possess a valid CDL A w/Air Brake to include a Tanker Endorsement., • Working knowledge of all Federal DOT Safety., • 1 - 2 years of manufacturing/machine operation experience in the dairy/food industry preferred., • SQF or similar quality systems experience preferred., • NYS Raw Lab Receiver license preferred. Byrne Headquartered in LaFayette, Byrne is a Central New York-based dairy company with a legacy spanning over 90 years. Its operations include an extended shelf-life (ESL) and ultra-high temperature (UHT) pasteurization plant in DeWitt, as well as an ESL manufacturing facility in Cortlandville. Byrne also maintains warehouse facilities in Syracuse and East Syracuse, along with a dedicated ice cream center in Syracuse. As a recognized industry leader, Byrne continues to drive innovation at the forefront of dairy processing and product development.

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25/hr. and $45/hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. Online Consumer Panels America is a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. • Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.), • Take care of the product being tested and use it responsibly, • Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.), • Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses), • There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm, • Write reviews as requested in the In-Home Usage Test Daily Schedule for each project, • Ability to follow specific instructions, • Excellent attention to detail and curious spirit, • Be able to work 15-25 hours per week and commit to a certain routine, • Have access to a computer and a reliable internet connection, • Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. • Very competitive pay rate, • Weekly pay, • Work around your own schedule, • Learn about an exciting industry, • Telecommute (you can work from home, work or school), • Most of the time you can keep the product you tested

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25/hr. and $45/hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. Online Consumer Panels America is a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. • Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.), • Take care of the product being tested and use it responsibly, • Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.), • Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses), • There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm, • Write reviews as requested in the In-Home Usage Test Daily Schedule for each project, • Ability to follow specific instructions, • Excellent attention to detail and curious spirit, • Be able to work 15-25 hours per week and commit to a certain routine, • Have access to a computer and a reliable internet connection, • Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. • Very competitive pay rate, • Weekly pay, • Work around your own schedule, • Learn about an exciting industry, • Telecommute (you can work from home, work or school), • Most of the time you can keep the product you tested

Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.

Job Description Sr Reliability EngineerLocation: Syracuse, NYClearance Required: Secret ClearanceThis position is contingent upon contract awardJob Description and Responsibilities:Experience supporting the system engineering process associated with materiel development in all phases of the weapon system life cycle across the following disciplines: test, quality, production, reliability, and product assurance.Experience developing and reviewing of test plans and procedures using statistically design test methods, test planning, test execution, test oversight, and test reporting to support technical recommendations for future decisions as requested. Experience preparing of Government-coordinated test plans IAW appropriate Army regulations and analysis/evaluation of test results.Ability to support engineering, developmental, operational and acceptance test requirements. Participate in test events conducted at YPG, AZ, with potential for additional testing in other geographical locations such as the White Sands Missiles Range, NM; Aberdeen Test Center, MD; Fort Huachuca, AZ; and Syracuse, NY.Qualifications:A minimum of ten (10) years of Reliability Engineering experience is requiredBachelor's Degree in EngineeringAbout Semper Valens Solutions:Semper Valens Solutions, Inc. (SVS) is a Service-Disabled Veteran Owned Small Business (SDVOSB) providing Cost Effective Software and Systems Engineering, Field Support, Training and Full Life cycle Support Management to the DOD and VA community.At Semper Valens, our vision is to remain a creative, cutting edge and cost-effective solutions provider where our shared intellect, industry experience, and technology excellence, make a positive difference in our customer's success. Our solutions help bridge the gap between IT and business prioritizations to optimize budgets, risks and operational processes.We search for outstanding technical professionals, hiring at all levels of the experience spectrum; intermediate, journeyman and senior. Consider us for your career plan.Semper Valens Solutions is an Equal Opportunity EmployerSemper Valens Solutions proactively fulfills its role as an equal opportunity employer. We do not discriminate against any employee or applicant for employment because of race, color, sex, religion, age, sexual orientation, gender identity and expression, national origin, marital/parental status, pregnancy/childbirth, or related conditions, physical or mental disability, genetic information, status as a Disabled Veteran, Recently Separated Veteran, Active-Duty Wartime or Campaign Badge Veteran, Armed Forces Services Medal, or any other characteristic protected by law.If you require a reasonable accommodation to apply for a position with Semper Valens Solutions through its online applicant system, please contact Semper Valens Solutions Human Resources Department at (830) 899-6870.Semper Valens Solutions is an affirmative action/equal opportunity employer - minorities, females, disabled, and protected veterans are urged to apply. Applicants have rights under Federal Employment Laws.All Jobs at Semper Valens Solutions: https://sempervalens.com/careers

Job Description Computer Engineer/Electrical Engineer Intern – Summer 2027 At Hidden Level, we’re building the future of airspace awareness through cutting-edge RF sensing technology. Our mission is to make the world safer—whether it’s protecting troops, securing infrastructure, or enabling smarter cities. We design, manufacture, and deploy advanced sensor systems that deliver real-time insights for defense and commercial applications. Position Overview: As we expand, we're looking for a Computer / Electrical Engineer for Summer 2027. As an intern you will gain hands-on experience with our custom hardware and software products. You can expect to grow meaningful technical experience while helping us accelerate our product development, production, and deployment of our state-of-the-art sensor network. Location: Learn, innovate, and grow alongside the team! This internship is onsite in Syracuse, NY, offering hands-on R&D experience and opportunities to collaborate closely with experienced engineers. As a Computer/Electrical Engineering Intern, you will… • Evaluate next generation hardware, analyze results and make recommendations to the design team., • Collaborate across engineering disciplines to develop and test advanced sensor products., • Work in a motivated, cross-disciplinary team passionate about solving challenging problems and delivering results., • Receive mentorship, guidance, and constructive feedback from experienced engineers. Responsibilities: • Support the design team by performing design verification testing of our next generation prototype hardware., • Make enhancements to software used to characterize and calibrate custom hardware components and complex sensor systems., • Work in a lab environment using digital scopes, signal generators, network analyzers, and temperature chambers., • Interface with lab equipment to automate testing., • Perform analysis of data collection results and make recommendations to the design team., • Support next generation sensor integration, test, and design verification activities including field test events centered around evaluation of drone target detection and tracking performance. Required Qualifications: • Enrolled in an accredited degree program majoring in Computer Engineering or Electrical Engineering., • Completed Sophomore year or greater by Summer 2027., • A minimum grade point average of 3.4. Recent transcript is required with application (unofficial transcripts are acceptable), • Ability to work in a fast-paced environment and overcome technical challenges through teamwork and collaboration., • Strong desire to learn and great communication skills., • Some experience working in one or more of the following languages: Python, MATLAB, C, C++, or VHDL. Hourly Rate Range: The hourly rate range for this position is estimated at $23 to $26 per hour. Please note that the salary information is a general guideline only. Hidden Level considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer. Equal Opportunity Employer: Hidden Level is an Equal Opportunity Employer. We consider all qualified applicants for employment without regard to race, color, religion, national origin, sex, pregnancy, sexual orientation, gender identity, age, veteran status, disability, or any other status protected by applicable federal, state, or local law. Security Note: Due to the nature of Hidden Level’s technology, only U.S. citizens can be considered for this position. Hidden Level Employees must be able to obtain and maintain a U.S. Government Security Clearance, if required for the position. Please click here to review the National Security Clearance Adjudicative Guidelines.

Job Description Senior Embedded Hardware Engineer Location: Onsite Salary: $145,000–$160,000 Position Summary We are seeking a Senior Embedded Hardware Engineer to lead the design and development of embedded electronic control hardware for HVAC and industrial control products. This individual will own hardware development from concept through production and work closely with cross-functional engineering teams to deliver reliable, high-quality products. Key Responsibilities • Create detailed electrical schematics for embedded electronic control hardware. This is a core responsibility of the role., • Lead the electrical design of embedded hardware from concept through production., • Design analog, digital, and mixed-signal circuits for microcontroller-based control systems, including power supplies, sensor interfaces, relay/triac drivers, and communication circuits., • Select electronic components and define PCB layout requirements., • Review PCB layouts to ensure functionality, reliability, thermal performance, manufacturability, and EMC performance., • Perform feasibility studies, engineering calculations, cost analyses, and technical risk assessments., • Build, test, troubleshoot, and refine prototype hardware., • Develop and execute hardware verification and validation testing, including performance, environmental, reliability, and compliance testing., • Participate in design reviews, FMEA activities, root cause analysis, and corrective action efforts., • Collaborate with firmware, mechanical, manufacturing, test, quality, and operations teams throughout product development, product launch, and sustaining engineering., • Support existing products through product improvements, component changes, cost reduction initiatives, and production issue resolution., • Provide technical guidance and mentor junior engineers. Required Qualifications • Must have proven experience creating electrical schematics for embedded electronic hardware. Candidates without hands-on schematic design experience will not be considered., • Bachelor's degree in Electrical Engineering or a related technical discipline., • 5+ years of embedded hardware design experience supporting production products., • Strong experience with analog, digital, and mixed-signal circuit design., • Experience with component selection, PCB layout review, hardware validation, and troubleshooting., • Ability to support products throughout the full development lifecycle—from concept and prototype through production launch and sustaining engineering., • Strong communication skills and the ability to work effectively on cross-functional engineering teams. Preferred Qualifications • Experience designing embedded control systems for HVAC, industrial controls, appliances, or similar products., • Experience with power supply design, sensor interfaces, relay/triac drivers, communication interfaces, and microcontroller-based control systems., • Familiarity with UL, CSA, FCC, or similar regulatory standards., • Experience with FMEA, reliability testing, component qualification, and design verification., • Background in product improvements, cost reduction initiatives, sustaining engineering, and technical leadership. Compensation • Base Salary: $145,000–$160,000, • Comprehensive benefits package, • Opportunity to lead the development of innovative embedded control products while working alongside a collaborative engineering team. Experience: • electrical schematics : 5 years (Required) Location: • Syracuse, NY 13215 (Required)

Job Description Hidden Level is transforming airspace safety with innovative, scalable drone detection and airspace technology. We provide real-time, actionable data to enhance security across various environments. Hidden Level is rapidly expanding our capacity and production infrastructure to support the next stage of the company’s growth. The Director of Manufacturing will lead Hidden Level’s manufacturing operations and play a critical role in scaling production to meet increasing demand. The leader will be responsible for manufacturing execution, Manufacturing and Service Engineering, production capacity, manufacturing technology, test capability and infrastructure, and the continued development of scalable, repeatable production processes for complex RF and electromechanical products. The Director will lead efforts to increase throughput, strengthen production readiness, remove manufacturing constraints, and develop the people, processes, equipment, tooling and systems required to support sustained growth. The role will work closely with Engineering, Quality, Supply Chain, Product Management, and other cross-functional teams to ensure products can be produced efficiently, reliably, and at increasing scale while maintaining Hidden Level’s high standards for quality, performance, and customer responsiveness. Location: This position is on-site in East Syracuse, NY. Responsibilities: Manufacturing Operations & Leadership: • Oversee all manufacturing activities, ensuring operational efficiency, quality, and safety., • Manage Manufacturing Engineering functions, including process optimization, tooling, and automation initiatives., • Lead a team of Technicians and Assemblers, ensuring productivity and adherence to best practices., • Develop and implement manufacturing strategies to meet production goals and business objectives., • Ensure compliance with industry regulations, quality standards, and company policies., • Work with the supply chain and production planning team to develop and implement capacity planning strategies., • Oversee PCBA (Printed Circuit Board Assembly) testing processes to ensure product functionality, quality, and reliability., • Implement best practices in PCBA testing, including functional testing, in-circuit testing (ICT), and automated test procedures., • Responsible for the implementation, maintenance and improvement of the Quality Management System in conformation to ISO 9001. Production Optimization & Process Improvement: • Focus on optimizing production processes to improve efficiency and reduce costs., • Identify and implement continuous improvement initiatives to enhance manufacturing performance., • Implement Lean Manufacturing, Six Sigma, and other best practices to optimize production., • Collaborate with cross-functional teams to drive process improvements and technological advancements. Quality Assurance: • Ensure that manufacturing processes meet stringent quality standards and industry best practices., • Work closely with Quality teams to maintain and improve product reliability. Cost Reduction & Efficiency: • Identify and implement cost-reduction initiatives without compromising quality or performance., • Develop strategies to enhance operational efficiency while maintaining high product standards. New Technology Implementation: • Champion research and investment in new areas of technology across the manufacturing function., • Oversee implementation planning and execution to ensure successful new capability and technology rollout. Safety Compliance: • Ensure that all manufacturing operations adhere to safety regulations and best practices., • Promote a culture of safety and risk management across the manufacturing floor. Team Development & Leadership: • Lead and mentor a team of manufacturing professionals, fostering a culture of collaboration and excellence., • Recruit, mentor, and develop a high-performing manufacturing team., • Foster a culture of continuous learning and improvement among team members., • Implement training programs to enhance skills and knowledge within the manufacturing team. Collaboration & Cross-Functional Support: • Work closely with R&D Engineering, Quality, Supply Chain, and other departments to ensure seamless production. Work with Manufacturing Program Management to align production schedules and resources., • Support new product introductions and transition products from development to full-scale production., • Drive collaboration between engineering and manufacturing to enhance product manufacturability. Required Qualifications: • Bachelor's degree in engineering or a related technical field 12+ years of experience in technical manufacturing leadership roles within a complex, highly regulated, or advanced-technology environment, Strong understanding of manufacturing processes used to to produce complex electromechanical systems, electronic products, sensors, or similar hardware., • Experience applying Lean Manufacturing, Six Sigma, and other continuous improvement methodologies., • Lean Six Sigma Belt certification., • Demonstrated ability to lead, mentor, and develop engineering and production teams., • Strong problem-solving, decision-making, and analytical skills., • Excellent communication and collaboration abilities. Preferred Qualifications: • Master’s degree is engineering, business, operations or a related field., • Experience in aerospace, defense, RF technology, radar, electronic warfare, sensing systems, or a related industry. ` Compensation and Benefits: Hidden Level offers a competitive salary and a comprehensive benefits package, including health insurance, paid parental leave, flexible time off, 401(k) with employer contributions, life insurance, disability insurance, and potential stock options. Salary Range: The anticipated salary range for this position based out of Syracuse, NY is estimated at $140,000 to $190,000 annually. Please note that the salary information is a general guideline only. Hidden Level considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer. Equal Opportunity Employer: Hidden Level is an Equal Opportunity/ Affirmative Action employer. All qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category. Security Note: Due to the nature of Hidden Level’s technology, only U.S. citizens can be considered for this position. Hidden Level Employees must be able to obtain and maintain a U.S. Government Security Clearance, if required for the position. Please click here to review the National Security Clearance Adjudicative Guidelines.

Job Description Staff Electrical Engineer - Digital Hardware At Hidden Level, we’re building the future of airspace awareness through cutting-edge RF sensing technology. Our mission is to make the world safer—whether it’s protecting troops, securing infrastructure, or enabling smarter cities. We design, manufacture, and deploy advanced sensor systems that deliver real-time insights for defense and commercial applications. Position Overview: As we expand, we're looking for a Staff Electrical Engineer - Digital Hardware with a proven track record of leading complex hardware development efforts and delivering advanced digital systems. This role provides technical leadership across multiple products and programs while driving the architecture, development, integration, and deployment of custom hardware and FPGA-based solutions supporting next-generation sensor and communication systems. Location: This position is located in the Syracuse, NY office with the potential for hybrid arrangements. Responsibilities: • Lead the architecture, design, and lifecycle support of digital hardware products and subsystems, • Collaborate across engineering disciplines to define requirements, develop technical solutions, and deliver product capabilities, • Serve as a technical leader and mentor, providing guidance on hardware architectures, FPGA development, verification, and design practices, • Architect custom multi-layer PCB and FPGA-based solutions utilizing modern Xilinx FPGA and SoC platforms including Ultrascale+ and RFSoC devices, • Lead technical reviews and provide design oversight across multiple programs, • Identify technical risks, integration challenges, and performance limitations, developing solutions that improve capability, reliability, manufacturability, and scalability, • Design and implement solutions supporting data acquisition, digital signal processing, command and control, external hardware interfaces, and high-speed communication protocols, • Drive adoption of new technologies, tools, and development methodologies that improve engineering efficiency and product quality, • Perform hardware, FPGA, subsystem, and system-level integration, verification, and validation activities, • Support customer engagements, proposal efforts, and long-term technology roadmap planning What We’re Looking For: • Proven track record of leading complex technical projects and influencing engineering direction, • Strong system-level thinking and architectural decision-making skills, • Excellent problem-solving, communication, and collaboration abilities, • Commitment to continuous learning and technical excellence Required Qualifications: • Bachelor's degree in Electrical Engineering, Computer Engineering, or related field, • 10+ years of related professional experience, • Extensive experience designing digital and mixed-signal hardware including FPGAs, SoCs, microcontrollers, memory interfaces, and high-speed data converters, • Strong experience developing FPGA-based solutions using VHDL and/or Verilog, • Experience with modern Xilinx FPGA technologies and Vivado design tools, • Applied experience testing and validating analog and digital hardware using oscilloscopes, network analyzers, logic analyzers, spectrum analyzers, and related laboratory equipment, • Demonstrated experience providing technical leadership, design oversight, and engineering mentorship, • Ability to travel 10% Preferred Qualifications: • Experience with Altium Designer, • Experience with Communication and Sensor Systems, Digital Signal Processing, Software Defined Radios, and RF System Design, • Experience with MATLAB, Python, Bash, and Linux, • Experience supporting product transition to manufacturing, • Experience contributing to technology roadmaps and product strategy Compensation and Benefits: Hidden Level offers a competitive salary and a comprehensive benefits package, including health insurance, paid parental leave, flexible time off, 401(k) with employer contributions, life insurance, disability insurance, and potential stock options. Salary Range: The salary range for this position is estimated at $134,000 to $174,000 annually. Please note that the salary information is a general guideline only. Hidden Level considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer. Equal Opportunity Employer: Hidden Level is an Equal Opportunity Employer. We consider all qualified applicants for employment without regard to race, color, religion, national origin, sex, pregnancy, sexual orientation, gender identity, age, veteran status, disability, or any other status protected by applicable federal, state, or local law. Security Note: Due to the nature of Hidden Level’s technology, only U.S. citizens can be considered for this position. Hidden Level Employees must be able to obtain and maintain a U.S. Government Security Clearance, if required for the position. Please click here to review the National Security Clearance Adjudicative Guidelines.

Job DescriptionLaboratory Technician Why Byrne At Byrne, we foster a culture built on teamwork, excellence, and professionalism. Our greatest strength lies in the exceptional talent and dedication of our team members across every part of the organization. We value their contributions and ensure they’re recognized, rewarded, and compensated in ways that reflect their impact and expertise. Pay and Benefits • Salary Range – $25.00 - $37.00 per hour, • Competitive bonus programs, • Medical, Dental, Vision benefits available day 1 of employment, • Supplemental benefits available on day 30 of employment, • Eligible for 401 (k) with a company match available on day 90 of employment, • Educational Support via tuition reimbursement and scholarship program Work Shift and Location 6750 Benedict Road W East Syracuse, NY 13057 Back Half Nights - 6pm-630am Job Overview The Laboratory Technician plays a key role in executing assigned quality tasks. This includes setting up, operating, cleaning, and troubleshooting production equipment in accordance with standard operating procedures. Key Responsibilities • Perform microbiological testing on raw milk, finished dairy products, and processing equipment to detect harmful bacteria such as Salmonella, E. coli, and Listeria while conducting plate counts, pathogen screening, and shelf-life studies to ensure products meet safety standards and regulatory requirements., • Conduct chemical and physical analyses including fat content, protein levels, moisture content, pH measurements, and acidity testing using laboratory instruments such as spectrophotometers, titrators, and analytical balances to verify product specifications and nutritional labeling accuracy., • Collect samples from various production stages including incoming raw materials, in-process products, and finished goods following proper sampling protocols and chain of custody procedures while maintaining sample integrity and traceability throughout the testing process., • Operate and maintain laboratory equipment such as incubators, autoclaves, microscopes, and chromatography systems while performing routine calibrations, quality control checks, and preventive maintenance to ensure accurate and reliable test results., • Document all test results, observations, and non-conformances in laboratory information management systems (LIMS) and prepare detailed reports for quality assurance teams, regulatory agencies, and production management while maintaining compliance with FDA and USDA documentation requirements., • Investigate product quality issues and customer complaints by conducting root cause analysis, performing additional testing protocols, and collaborating with production teams to identify corrective actions while ensuring all testing procedures follow established standard operating procedures and Good Laboratory Practices. Min. Qualifications • Minimum of GED or High School Diploma is required., • Associates degree in dairy/food sciences or equivalent highly preferred, • 1-2 years’ experience in similar food industry lab setting highly preferred. Byrne Headquartered in LaFayette, Byrne is a Central New York-based dairy company with a legacy spanning over 90 years. Its operations include an extended shelf-life (ESL) and ultra-high temperature (UHT) pasteurization plant in DeWitt, as well as an ESL manufacturing facility in Cortlandville. Byrne also maintains warehouse facilities in Syracuse and East Syracuse, along with a dedicated ice cream center in Syracuse. As a recognized industry leader, Byrne continues to drive innovation at the forefront of dairy processing and product development

Job DescriptionCompany Description INFICON is a leading provider of innovative instrumentation, critical sensor technologies, and Smart Manufacturing/Industry 4.0 software solutions that enhance productivity and quality of tools, processes, and complete factories. These analysis, measurement and control products are essential for gas leak detection in air conditioning/refrigeration and automotive manufacturing. They are vital to equipment manufacturers and end-users in the complex fabrication of semiconductors and thin film coatings for optics, flat panel displays, solar cells and industrial vacuum coating applications. Other users of our vacuum-based processes include the life sciences, research, aerospace, packaging, heat treatment, laser cutting and many other industrial processes. We also leverage our expertise in vacuum technology to provide unique, toxic chemical analysis products for emergency response, security, and environmental health and safety. Job Description We are seeking a skilled and driven Senior Mechanical Engineer with deep expertise in new product design. This role is central to the development of robust, manufacturable, and environmentally sealed products across our portfolio. The ideal candidate combines a rigorous engineering foundation with hands-on experience in design for manufacturability, environmental protection standards, and advanced simulation methods. You will collaborate closely with electrical, firmware, and systems teams to deliver high-quality hardware from concept through production. Lead full-lifecycle mechanical design and analysis for sealed electronics enclosures, vacuum-compatible assemblies, and precision sensor platforms. Design products to meet IP67 (and up to IP68) ingress protection standards, including gasket selection, sealing geometry, and validation testing protocols. Develop thermal control strategies for sensitive electronic components and sensor assemblies requiring tight temperature regulation, including active heating, cooling, and stabilization circuits. Perform steady-state and transient simulation using FEA tools (e.g., ANSYS ) to validate designs and predict performance prior to prototyping. Design for thermal management in vacuum environments, including conduction-dominant heat transfer paths, radiation considerations, and material selection for low-outgassing and high thermal conductivity. Collaborate with cross-functional teams (electrical, firmware, manufacturing, quality) to integrate mechanical solutions into complete product architectures. Collaborate with electrical engineers to co-design PCB layouts, component placement strategies, and power dissipation budgets that align with thermal constraints. Define and execute mechanical validation plans including environmental testing, sealing verification, and structural load testing. Support sustaining engineering efforts including field failure analysis, component obsolescence management, and cost-reduction initiatives. Participate in Agile sprint planning and cross-functional design reviews, providing clear technical status updates and driving issues to resolution. Qualifications • Bachelor's degree in Mechanical Engineering or a related field., • 10+ years of relevant experience. Additional Information The expected salary range for this position is between $100,000 and $140,000 per year. The actual compensation will be determined based on experience, location, and other factors permitted by law. In addition, INFICON employees are eligible for a profit-sharing bonus with a target of 10% as well as 401K match up to 8% (vesting schedule). INFICON provides a dynamic work environment that promotes diversity, equity, and inclusion. Our employees experience ongoing green initiatives, flexible work hours, and a variety of health and wellness programs. INFICON’s forward-thinking approach offers countless opportunities to design, support, and manufacture a diverse product portfolio that expands globally. Our Lean and Agile work environment offers competitive compensation, relocation assistance, a discretionary bonus, and generous employee benefits; major medical, dental, health, vision, 401K, vacation and sick time, tuition reimbursement, and more! INFICON is committed to ensuring that our online application process provides an equal opportunity to all job seekers that apply without regard to race, religion, ethnicity, national origin, citizenship, gender, age, protected veteran status, disability status, genetic information, sexual orientation, or any other protected characteristic. A notice describing Federal equal employment opportunity laws is available here to reaffirm this commitment. Any contact that would like to request a reasonable accommodation to participate in the application process should contact us.careers@inficon.com. INFICON, Inc. strictly complies with all aspects of the Export Administration Regulations ('EAR'), including those sections dealing with deemed exports to foreign nationals.

Job Description Senior Embedded Firmware Engineer Salary: $139,500 – $163,700 + 12% Bonus Position Summary We are seeking an experienced Senior Embedded Firmware Engineer to lead the design, development, integration, and testing of embedded firmware for advanced electrical wiring devices, including lighting controls, connected devices, and protection products. This role will focus on developing high-quality firmware for resource-constrained microcontroller platforms while collaborating with cross-functional engineering teams to deliver innovative products. Key Responsibilities • Lead and participate in the planning, design, development, debugging, and integration of embedded firmware for new and existing products., • Design firmware for resource-constrained microcontrollers used in electrical wiring devices such as switches, dimmers, receptacles, GFCIs, AFCIs, and other connected products., • Collaborate closely with hardware engineers on schematic reviews, hardware/firmware partitioning, board bring-up, and troubleshooting mixed hardware/software issues., • Develop firmware that interfaces with low-rate wireless communication protocols, including IEEE 802.15.4 (Zigbee or similar)., • Utilize Azure DevOps or comparable development tools to manage software planning, development, testing, and deployment within Agile or Kanban environments., • Develop and execute comprehensive firmware validation strategies, including automated and manual testing, debugging, root-cause analysis, and regulatory compliance verification., • Support existing production products through firmware maintenance, issue resolution, design improvements, and lifecycle management., • Work collaboratively with Engineering, Product Management, Systems Engineering, and Design teams to ensure projects align with product roadmaps and business objectives., • Communicate technical designs, project updates, and task status effectively with both technical teams and engineering leadership. QualificationsEducation • Bachelor's degree in Electrical Engineering, Computer Science, or a related engineering discipline. Experience • Minimum of 5 years of embedded firmware development experience., • At least 5 years of experience developing firmware for new product development., • Experience working with embedded microprocessor development environments and firmware testing. Required Technical Skills • Strong proficiency in embedded C programming for microcontroller-based systems., • Experience debugging firmware and working with low-level hardware interfaces and peripherals., • Experience using Azure DevOps or equivalent development lifecycle tools within Agile or Kanban methodologies., • Ability to interpret and work directly with Altium design files, including schematics, PCB layouts, and assembly drawings., • Solid understanding of analog and digital circuit design, including power management, signal integrity, interfaces, and sensors/actuators., • Experience with wireless communication technologies such as Zigbee, IEEE 802.15.4, or similar protocols., • Experience developing products requiring regulatory compliance (UL, FCC, or similar)., • Experience supporting production firmware through maintenance, troubleshooting, and continuous improvement., • Familiarity with serial communication protocols, including RS-232 and I²C., • Understanding of IP-based communication protocols., • Proficiency with Microsoft Office applications and the ability to effectively leverage AI and web-based resources., • Excellent written and verbal communication skills. Additional Requirements • Strong analytical and problem-solving abilities with excellent debugging skills., • Ability to present technical concepts and project status to engineering leadership and cross-functional teams., • Willingness to travel internationally up to 25% as needed. Compensation & Benefits • Competitive salary: $139,500 – $163,700 plus bonus, • Comprehensive benefits package, • Opportunities for professional growth and advancement, • Collaborative engineering environment focused on innovation Work Location: Hybrid remote in Syracuse, NY 13209

Job DescriptionCompany Description INFICON is a leading provider of innovative instrumentation, critical sensor technologies, and Smart Manufacturing/Industry 4.0 software solutions that enhance productivity and quality of tools, processes, and complete factories. These analysis, measurement and control products are essential for gas leak detection in air conditioning/refrigeration and automotive manufacturing. They are vital to equipment manufacturers and end-users in the complex fabrication of semiconductors and thin film coatings for optics, flat panel displays, solar cells and industrial vacuum coating applications. Other users of our vacuum-based processes include the life sciences, research, aerospace, packaging, heat treatment, laser cutting and many other industrial processes. We also leverage our expertise in vacuum technology to provide unique, toxic chemical analysis products for emergency response, security, and environmental health and safety. Job Description As a Mobile Application Developer (Software Developer) on our Engineering team, you will build and evolve the iOS and Android apps that HVAC/R technicians rely on in the field. You will design features that pair phones with our service tools over Bluetooth Low Energy (BLE), and Wi-Fi, and NFC, capture and visualize live sensor data (pressure, temperature, refrigerant mass, micron levels, combustion readings), and embed AI capabilities that turn raw data into clear, actionable guidance for the technician. This role sits at the intersection of mobile engineering, embedded device communication, and applied AI. You will partner closely with firmware engineers, product managers, UX designers, and — most importantly — working HVAC/R technicians whose feedback shapes every release. Mobile Application Development Design, build, and maintain features for our iOS (Swift / SwiftUI) and Android (Kotlin / Jetpack Compose) apps, with selective use of cross-platform frameworks (React Native or Flutter) where appropriate. Build clean, intuitive UIs optimized for one-handed use in attics, mechanical rooms, on rooftops, and in gloves — not in a quiet office. Implement an offline-first architecture so technicians can keep working in basements, walk-in coolers, and remote sites with no connectivity, then sync cleanly when they’re back online. Write well-tested, maintainable code with strong attention to performance, battery life, and crash-free sessions on a wide range of devices. Make AI-assisted development a core part of how you work. Use AI coding assistants and agentic tools to accelerate everyday development, while keeping a high bar for code quality, security, and maintainability Phone-to-Tool Communication Own and extend the mobile-side stack that pairs and communicates with HVAC/R service instruments over Bluetooth Low Energy (BLE), Wi-Fi Direct, and NFC, including connection management, reconnection logic, and firmware-version compatibility. Implement reliable streaming and logging of live sensor data — system pressures, superheat/subcool, vacuum levels, refrigerant charge, temperature differentials, combustion readings, and leak-rate data. Collaborate with firmware engineers on BLE GATT profiles, message schemas, OTA firmware updates pushed through the app, and diagnostic flows for field troubleshooting. Integrate with adjacent ecosystems used in the trade: refrigerant tracking and reporting platforms, EPA Section 608 compliance workflows, dispatch / field service management (FSM) systems, and customer-facing report delivery (PDF, email, e-sign). Help evolve our SDK so third-party HVAC/R apps can talk to our tools the same way our first-party app does. Cross-Functional Collaboration Partner with product managers, UX designers, firmware engineers, and cloud/back-end engineers to ship end-to-end features. Participate in field visits and ride-alongs with HVAC/R technicians to observe real installs, start-ups, and service calls, and translate what you see into product improvements. Contribute to code reviews, architecture discussions, sprint planning, and engineering hiring. Qualifications Education • Bachelor's degree in Computer Science, Software Engineering, or equivalent experience. Required Qualifications • 3+ years of professional mobile application development experience, • Experience building and shipping iOS and/or Android applications, • Experience with Swift, Kotlin, Flutter, React Native, or similar modern mobile development technologies, • Experience integrating mobile applications with connected devices, sensors, or hardware products, • Familiarity with Bluetooth Low Energy (BLE) or similar wireless communication technologies, • Experience working with APIs, local data storage, and real-time or streaming data, • Strong software engineering fundamentals including testing, source control, and CI/CD, • Strong communication and collaboration skills Preferred Qualifications • Experience with AI/ML, LLM integrations, or intelligent application features, • Experience supporting HVAC, industrial, field service, or technician-focused applications, • Experience generating reports, workflows, or customer-facing documentation from mobile applications Additional Information The expected salary range for this position is between $90,000 and $130,000 per year. The actual compensation will be determined based on experience, location, and other factors permitted by law. In addition, INFICON employees are eligible for a profit-sharing bonus with a target of 10% as well as 401K match up to 8% (vesting schedule). INFICON provides a dynamic work environment that promotes diversity, equity, and inclusion. Our employees experience ongoing green initiatives, flexible work hours, and a variety of health and wellness programs. INFICON’s forward-thinking approach offers countless opportunities to design, support, and manufacture a diverse product portfolio that expands globally. Our Lean and Agile work environment offers competitive compensation, relocation assistance, a discretionary bonus, and generous employee benefits; major medical, dental, health, vision, 401K, vacation and sick time, tuition reimbursement, and more! INFICON is committed to ensuring that our online application process provides an equal opportunity to all job seekers that apply without regard to race, religion, ethnicity, national origin, citizenship, gender, age, protected veteran status, disability status, genetic information, sexual orientation, or any other protected characteristic. A notice describing Federal equal employment opportunity laws is available here to reaffirm this commitment. Any contact that would like to request a reasonable accommodation to participate in the application process should contact us.careers@inficon.com. INFICON, Inc. strictly complies with all aspects of the Export Administration Regulations ('EAR'), including those sections dealing with deemed exports to foreign nationals.

Job Description At Solvay Bank, our formula for success combines the traditions of our culture and a sharp strategic vision. We are a growth-oriented community bank that fosters excellence, pride, teamwork and engagement in our workplace. Consider an opportunity as part of our finance team. VP, Director of Finance We are seeking an experienced Director of Finance to lead the financial management, strategy, and planning of the bank. This role oversees budgeting, forecasting, asset/liability management (ALM), revenue growth strategies and regulatory financial reporting, while providing strategic insights to executive leadership. The Director ensures the bank maintains strong financial health, regulatory compliance, and sustainable profitability. The successful candidate will have a blend of financial strategy, regulatory compliance and strong leadership skills. They will have a graduate degree in Accounting or Finance. A minimum of 15 years’ progressive experience required. Prior financial institution experience and CPA strongly preferred. For over 109 years Solvay Bank has been dedicated to our customers and community. Join us and enjoy the many rewards; matched 401(k) retirement savings, health and dental coverage, and more. Internal applications must be submitted by 06/24/2026 Solvay Bank is an EOE/AA/Disability/Veteran https://dol.ny.gov/system/files/documents/2023/06/p690-your-rights-as-an-employee-to-express-breast-milk-at-work-.pdf https://dol.ny.gov/system/files/documents/2022/02/ls740_1.pdf Job Title: Director of Finance Position Summary The Director of Finance is responsible for supporting the financial strategy, planning, and performance management of the bank. This role oversees budgeting, forecasting, asset/liability management (ALM), revenue growth strategies and regulatory financial reporting, while providing strategic insights to executive leadership. The Director ensures the bank maintains strong financial health, regulatory compliance, and sustainable profitability. Key Responsibilities Financial Strategy & Executive Partnership • Partner with the CFO, to develop and execute financial strategies aligned with the bank’s growth objectives, • Provide actionable insights on profitability, liquidity, capital planning, and balance sheet optimization, • Support strategic initiatives including loan growth, deposit strategies, and product pricing Financial Planning & Analysis (FP&A) • Lead the annual budget, multi-year financial plan, and rolling forecasts, • Analyze key drivers of bank profitability, including net interest margin (NIM), non-interest income, and expense management, • Develop and maintain financial models to support lending, deposit growth, and investment strategies, • Prepare and present financial performance reports to executive leadership and the Board of Directors Asset/Liability Management (ALM) • Oversee ALM processes, including interest rate risk analysis and balance sheet positioning, • Monitor liquidity, funding strategies, and capital adequacy, • Partner with Treasury and ALCO to optimize earnings while managing risk, • Utilize ALM models and scenario analysis to inform decision-making and investment strategies Accounting & Financial Reporting • Oversee preparation of accurate and timely financial statements in accordance with GAAP, • Ensure integrity of the general ledger and financial reporting systems, • Manage month-end, quarter-end, and year-end close processes, • Manage oversight of all reserves, Allowance for Credit Losses (ACL) and loan modifications and accounting considerations Regulatory Reporting & Compliance • Ensure timely and accurate completion of all required regulatory filings (e.g., Call Reports), • Oversee all monthly, quarterly and annual financial reporting requirements, • Maintain compliance with applicable banking regulations and internal controls, • Oversee internal and external audits and regulatory examinations, • Stay current on changes in banking regulations and accounting standards Capital & Liquidity Management • Monitor capital ratios and support capital planning strategies, • Oversee liquidity management, cash flow forecasting, and funding sources, • Provide analysis on dividend strategy, capital deployment, and stress testing Team Leadership • Lead and develop the finance and accounting team, • Establish clear goals, accountability, and performance expectations, • Promote a culture of collaboration, accuracy, and continuous improvement Process & Systems Optimization • Evaluate and enhance financial systems, reporting tools, and data analytics capabilities, • Drive automation and efficiency in financial reporting and planning processes Qualifications Education & Experience • Bachelor’s degree in Finance, Accounting, or related field (MBA preferred), • CPA strongly preferred, • 15+ years of progressive finance experience, with significant experience in banking or financial services, • Demonstrated experience with ALM, regulatory reporting, and bank financial performance management Skills & Competencies • Deep understanding of banking financial metrics (NIM, ROA, ROE, efficiency ratio), • Strong knowledge of banking regulations, Call Reports, and compliance requirements, • Expertise in financial modeling, tax planning, forecasting, and balance sheet analysis, • Experience with ALM software and financial reporting systems, • Strong leadership, communication, and presentation skills, • Ability to translate complex financial data into actionable insights Preferred Experience • Experience working directly with Asset/Liability Committee (ALCO), • Familiarity with CECL (Current Expected Credit Loss) methodology, • Experience in community or regional banking environments, • Exposure to loan portfolio analytics and deposit pricing strategies

Job Description At G&C Foods, everyone has a place to contribute and grow. We believe great companies are built by great people, which is why we foster high‑quality work habits and a culture where every individual is valued. As a 100% employee‑owned company, the value created is shared with the people who make it possible. With our flagship in Syracuse, NY, and a state‑of‑the‑art facility in Alachua, FL, G&C Foods serves partners across nearly 30 states and more than 30 countries. As a leading redistributor of refrigerated, frozen, and dry foods, our team plays a direct role in strengthening the resilience of the food supply chain and supporting retailers and foodservice operators who feed communities every day. G&C Foods is currently looking for a professional and dynamic QA Technician I located in our Syracuse, NY. Schedule: Monday through Friday, 9:00 AM - 6:30 PM Reports to: Director of NE Warehousing Managers Others: No Location: Syracuse, NY (On-Site) Travel: 5% Annually Job Summary: The QA Tech I main function is to perform inspections to ensure food safety and quality compliance across all operational areas at G&C Foods. Essential Functions: • Continual inspection of all operational areas for cGMP compliance., • Verifies that tasks and paperwork related to the SQF system are being completed; gathers, reviews and files quality and food safety records, as applicable., • Supports site Food Safety program, HACCP plans and CCPs., • Places nonconforming product on hold; provides guidance for products to be reworked; and releases product., • Provides confirmatory checks of all Critical Control Points (CCPs)., • Performs inspections with production / warehouse and ensures that all deficiencies are rectified before operation commences, as needed., • Ability to handle all types of raw/unpackaged food products that may contain food allergens as described in the work environment section of this job description., • Gathers production samples and organizes them for easy retrieval for any investigations., • Verifies ATP testing swabbing to verify the effectiveness of cleaning before production begins., • Performs thermometer calibrations weekly, or as needed., • Performs incoming inspections on products used in the production areas; approves or reject shipments; generates supplier corrective actions if rejected., • Supports Production and Warehouse staff in the application and/or monitoring of the SQF rules and controls., • Serves as a resource to Production and Operations regarding food safety and quality issues., • Generates and informs the immediate supervisor of all non-conformities to the SQF rules; accepts corrective and preventive actions; and closes nonconformances., • Reviews, organizes and files documents in a timely manner., • Assists with regulatory and 3rd party audits, as needed., • Serves as liaison from QA Manager to Production and Operations personnel., • Escalates any issues that can’t be resolved to the QA Manager., • Performs other duties as assigned. Minimum Position Qualifications/Education Requirements: • High school diploma or equivalent., • Must have the ability to read, write legibly and understand simple verbal & written instructions., • Must have basic computer knowledge and basic Microsoft Office skills., • Food manufacturing or distribution experience., • HACCP certified or the ability to become HACCP certified. Why Build Your Career at G&C Foods? At G&C, we believe exceptional people deserve exceptional rewards. When you join our team, you’re not just taking a job; you’re stepping into a career with a company that invests in your growth, values your contribution, and celebrates your success. Our Benefits Package Includes: • Competitive Health Coverage – We offer a wide range of medical plans to meet the diverse needs of our employees, with coverage starting at an affordable weekly rate. Plus, comprehensive dental, vision, and a 401(k) with company match to help you plan for the future., • Company-Paid Life Insurance – Because your peace of mind matters., • Performance-Based Bonuses – Earn up to the equivalent of five additional weeks’ pay each year based on your impact and results., • Onsite Fitness & Wellness Centers – Stay active and healthy without leaving the workplace., • Flexible Scheduling Options – Designed to support your life outside of work., • Company Culture Perks – From team cookouts and appreciation events to seasonal holiday gifts, we celebrate our people year-round., • Exclusive Employee Product Discounts – Access unbeatable prices on a wide range of products, available only to our team., • Career Advancement – Clear pathways to grow within the company, backed by leadership who invest in your success., • Open-Door Leadership – Access to decision-makers who listen, act, and value your input., • Annual Flu Clinics – Convenient, no-cost health support right at work., • …and much more – A workplace where respect, teamwork, and opportunity come standard. Join a company that’s growing, innovating, and leading the way in foodservice redistribution—while keeping our people at the heart of everything we do. Contact/Application Information: If you’re interested, please apply through Indeed. If you have any questions, you can email recruiting@gcfoods.com. Thank you for your interest, and we look forward to meeting you! #ADP1

Job Description At Hidden Level, we’re building the future of airspace awareness through cutting-edge RF sensing technology. Our mission is to make the world safer—whether it’s protecting troops, securing infrastructure, or enabling smarter cities. We design, manufacture, and deploy advanced sensor systems that deliver real-time insights for defense and commercial applications. Position Overview: As we expand, we're looking for a Senior Software Test Engineer to participate in our testing efforts and enforce quality across embedded and cloud-based systems. You'll collaborate closely with cross-functional teams to ensure testing is proactive, reliable, and aligned with development goals. Location: The position is located in the Syracuse, NY office with the potential for hybrid arrangements. Responsibilities: • Participate in the design, execution, and maintenance of testing methodologies across embedded and cloud-based systems., • Develop, document, and maintain test plans, test cases, and standardized QA processes., • Perform exploratory testing for new features and complex scenarios., • Build and maintain reliable automated regression test suites integrated into GitLab CI/CD pipelines using modern frameworks., • Organize and execute build and release activities, including versioning, packaging, and coordinating with DevOps and engineering teams., • Collaborate closely with developers, DevOps, and product teams to ensure quality throughout the software development lifecycle., • Maintain high standards of documentation for test processes, defect tracking, and release validation., • Participate in design reviews to ensure testability of new features., • Help establish testing best practices across the engineering team. What We’re Looking For: • Ownership of technical tasking from ideation through implementation, • Demonstrated ability to foster and facilitate a culture of learning and collaboration across hybrid (in-person and remote) teams., • Strong verbal and written communication skills and the ability to work effectively in a team-oriented environment., • Ability to think creatively to overcome technical challenges., • Passion to drive software test engineering process improvements and stay abreast of industry trends and emerging technologies. Required Qualifications: • Bachelor’s Degree in Computer Science, Software Engineering, or a related field., • 5+ years of experience in software testing including hands-on experience testing embedded systems and cloud-based platforms., • Proven experience with GitLab CI/CD and integrating tests into DevOps pipelines., • Proficiency with Linux-based systems, including command-line tools and shell scripting., • Strong scripting skills (e.g., Python, Bash) for test automation and tool creation., • Experience using issue tracking and documentation tools (e.g., JIRA, Confluence)., • Experience with software written in C++ and Python., • Excellent problem-solving skills and attention to detail., • 10% travel. Preferred Qualifications: • Experience with performance testing and API testing frameworks., • Experience testing distributed systems and data processing pipelines., • Knowledge of performance, security, or system-level testing techniques. Compensation and Benefits: Hidden Level offers a competitive salary and a comprehensive benefits package, including health insurance, paid parental leave, flexible time off, 401(k) with employer contributions, life insurance, disability insurance, and potential stock options. Salary Range: The salary range for this position is estimated at $112,500 to $140,000 annually. Please note that the salary information is a general guideline only. Hidden Level considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer. Equal Opportunity Employer: Hidden Level is an Equal Opportunity Employer. We consider all qualified applicants for employment without regard to race, color, religion, national origin, sex, pregnancy, sexual orientation, gender identity, age, veteran status, disability, or any other status protected by applicable federal, state, or local law. Security Note: Due to the nature of Hidden Level’s technology, only U.S. citizens can be considered for this position. Hidden Level Employees must be able to obtain and maintain a U.S. Government Security Clearance, if required for the position. Please click here to review the National Security Clearance Adjudicative Guidelines.

Job Description SRC Inc. is seeking Engineering Interns for spring 2027 who will be working onsite, 40 hours a week. As an engineering intern, you will contribute to the design, development, implementation and testing of state-of-the-art radar and electronic warfare products. Based on your interests, you will be selected to work in one specialization from Embedded Design, Machine Intelligence, Integration & Test Engineering, or Software Engineering. You will work closely with senior engineers and gain experience in creating innovative solutions tailored to our products and customer needs. You will bring your unique perspective to our multi-department teams of engineers and collaborate on designs aligned with project goals and requirements. What You'll Do Embedded Design: • Design, develop, implement, test and optimize firmware using VHDL/Verilog, • Work with FPGAs and System-on-Chips (SoCs) to develop electronic warfare and radar systems, • Learn and apply FPGA design principles including RTL design, verification, logic synthesis, prototyping, and timing analysis, • Use Python, TCL and other scripting languages to automate continuous development, continuous integration (CI/CD) workflows Software Engineer:, • Design and develop high-quality software solutions using an Agile workflow, • Write clean, efficient code and participate in code reviews to ensure delivery of quality products, • Communicate proposed software solutions with multi-department engineering teams., • Develop sound software engineering principles using tools such as Git, Bamboo, Sonarqube, • Adapt to new technologies and languages including Docker, Kubernetes, Rust as program needs allow Machine Intelligence Engineer:, • Develop machine learning algorithms and models to enhance product capabilities, • Analyze data to identify patterns and optimize decision-making processes, • Work with software and hardware teams to integrate AI/ML solutions into products Integration & Test Engineer:, • Participate in design requirements reviews to ensure the requirements can be tested, • Coordinate integration of subsystems and components into full systems., • Develop, execute and troubleshoot test plans and procedures to validate system functionality., • Increase testing efficiency by utilizing Python-based automated test suite., • Utilize model-based tools to define test strategies and verifications against system designs What You'll Bring, • Completion of two years of college and current enrollment in a bachelor’s degree in a relevant engineering field (e.g., Electrical, Computer, Computer Science, or Software), • A minimum grade point average of 3.3. Most recent transcripts are required with application (unofficial transcripts are acceptable), • A strong understanding of your engineering fields foundational concepts, • Knowledge of design, testing, and debugging techniques relevant to your field, • Ability to take initiative and proactively address challenges, • Familiarity with applicable tools and methodologies, • Ability to work collaboratively in a team environment with excellent communication skillsWhat Sets Us Apart? SRC, Inc., a not-for-profit research and development company, combines information, science, technology and ingenuity to solve “impossible” problems in the areas of defense, environment and intelligence. Across our family of companies, we apply bright minds, fresh thinking and relentless determination to deliver innovative products and services that are redefining possible®. When you join our team, you’ll be a part of something truly meaningful — helping to keep America and its allies safe and strong. You’ll collaborate with more than 1,400 engineers, scientists and professionals — with 20 percent of those employees having served in the military — in a highly innovative, inclusive and equitable work environment. You’ll receive a competitive salary and comprehensive benefits package that includes four or more weeks of paid time off to start, 10 percent employer contribution toward retirement, and 100 percent tuition support. Total compensation for this role is market competitive. The anticipated range for this position based out of Syracuse, NY is estimated at $22.00 to $26.00/hour. The actual salary will vary based on applicant’s experience, skills, and abilities, geographic location as well as other business and organizational needs. SRC offers competitive benefit options, for more details please visit our website.

Job DescriptionCompany Description INFICON is a global leader in instrumentation, sensor technologies, and Smart Manufacturing solutions that help customers improve productivity, quality, and operational performance across semiconductor, industrial, life science, and advanced manufacturing markets. Job Description About the Role We are seeking an experienced people leader and Electrical Engineering Manager who is passionate about developing talented engineers and building high-performing teams. You will lead INFICON's Electrical Engineering team in Syracuse, NY, which designs the precision electronics at the heart of our sensor and instrumentation products. The team works across the full spectrum of electronics: high-precision analog circuits, digital systems, RF electronics, power supplies, PCB layout, component selection, and prototype testing — from breadboard-level MVPs delivered directly into customer hands to series production designs. We measure currents in the nanoampere range and capacitances in the femtofarad range, and we ship these circuits into products used in fabrication of the most advanced semiconductors, medical devices, automotive, energy and security applications, space exploration, and more. As the team matures, you'll help shape how we adopt AI tools in electronics workflows, lead lean product discovery with customers, and help support component lifecycle and supply chain strategy — but your foundation is building an exceptional team and providing senior technical leadership. Key Responsibilities • Lead, mentor, and coach a team of electrical engineers spanning analog, digital, power, and RF design., • Build individual development plans with every team member and support their growth on either the professional engineering or the leadership career track., • Foster psychological safety, a growth mindset, and a culture where experimentation, including experiments that don't work out, is celebrated., • Conduct regular 1:1s, give meaningful feedback, and champion your team's professional development across the organization., • Provide hands-on technical guidance in high-precision analog design, digital electronics, RF systems, signal processing, precision power supplies, embedded systems, PCB layout, and compliance., • Review and approve engineering designs, test plans, and documentation., • Champion a lean, hypothesis-driven approach: build breadboard MVPs, get them into customers' hands, validate assumptions, and iterate., • Drive Agile practices (Scrum or Kanban) and communicate effectively across hardware, software, mechanical, and product functions., • Stay current with emerging technologies, including AI-enabled tools, new component technologies, and design methodologies, and help the team evaluate how they could change how we work.Qualifications Education • Bachelor's or Master's degree in Electrical Engineering or a related field Required Skills & Experience • 7+ years of experience in electronics engineering, with 2+ years in a leadership or senior technical lead role., • Hands-on experience in analog and digital circuit design, RF design, and/or high-precision measurement., • Experience taking products from concept through production and maintaining the product lifecycle., • Familiarity with Agile methodologies (Scrum, Kanban, or similar)., • Strong communication, collaboration, and problem-solving skills. Preferred Skills & Experience • Experience with precision analog electronics design., • Curiosity about what's beyond electronics: You are excited about working with physicists, chemists, materials scientists, software and mechanical engineers to bring a product vision to life., • A genuine passion for developing people as professionals and future leaders, not just technically. Additional Information The expected salary range for this position is between $140,000 and $180,000 per year. The actual compensation will be determined based on experience, location, and other factors permitted by law. In addition, INFICON employees are eligible for a profit-sharing bonus with a target of 10% as well as 401K match up to 8% (vesting schedule). For the right candidate, this role could be eligible for a sign on bonus and/or relocation reimubrsement. INFICON provides a dynamic work environment that promotes diversity, equity, and inclusion. Our employees experience ongoing green initiatives, flexible work hours, and a variety of health and wellness programs. INFICON’s forward-thinking approach offers countless opportunities to design, support, and manufacture a diverse product portfolio that expands globally. Our Lean and Agile work environment offers competitive compensation, relocation assistance, a discretionary bonus, and generous employee benefits; major medical, dental, health, vision, 401K, vacation and sick time, tuition reimbursement, and more! INFICON is committed to ensuring that our online application process provides an equal opportunity to all job seekers that apply without regard to race, religion, ethnicity, national origin, citizenship, gender, age, protected veteran status, disability status, genetic information, sexual orientation, or any other protected characteristic. A notice describing Federal equal employment opportunity laws is available here to reaffirm this commitment. Any contact that would like to request a reasonable accommodation to participate in the application process should contact us.careers@inficon.com. INFICON, Inc. strictly complies with all aspects of the Export Administration Regulations ('EAR'), including those sections dealing with deemed exports to foreign nationals.

Job Description SRCTec, LLC is actively searching for a dedicated Senior Test Engineer to design, develop, and test innovative solutions that tackle complex, nationally significant challenges. We leverage cutting-edge technologies to craft advanced manufacturing processes, enabling the construction and testing of sophisticated systems in domains such as radar surveillance, electronic warfare, and unmanned aircraft systems (UAS). Join us as you build your engineering career while helping shape the future of engineering excellence. What You’ll Do • Support the development of manufacturing test systems for radar surveillance, electronic warfare, and UAS technologies, • Apply sound engineering principles to support the introduction of new designs into production, • Assist in developing and maintaining test hardware to increase capability, reliability, and throughput, • Modify and maintain software such as LabVIEW and Python, • Utilize SQL queries and engineering tools (MATLAB, Minitab, etc.) to support data-driven decisions and continuous improvement efforts, • Work with multidisciplinary teams to solve technical challenges, • Diagnose and resolve hardware, software, and system-level issues within manufacturing test environments, • Provide engineering support to manufacturing during new product introductions and ongoing production, • Ensure test documentation, requirements, and records meet technical, quality, and schedule requirements What You’ll Bring • Bachelor’s or Master’s degree in electrical engineering, computer engineering, electrical engineering technology, or related discipline and 2+ years of relevant experience, • Basic understanding of radar, RF, and electronic warfare systems, • Familiarity with how product requirements translate into manufacturing and test solutions, • Exposure to design-for-test or manufacturing test requirements development is a plus, • Knowledge of programming tools like LabVIEW, TestStand, or Python, • Familiarity with databases and data analysis tools, • Knowledge of structured problem solving and root cause analysis techniques, • Experience with hardware or software troubleshooting, • Strong communication and teamwork skills, • Willingness to learn new technologies and take on technical challenges, • Strong organizational skills and attention to detail, • Ability to manage multiple assignments in a fast-paced environment Ways to Stand Out • Exposure to manufacturing or production test tools, fixtures, and hardware systems, • Programming experience in languages such as Python or Matlab, • LabVIEW certifications (CLA, CLAD, CLD), • Hands-on experience with RF measurements, high-speed digital systems, or PCA-to-system-level testing, • Eagerness to learn and use a data-driven mindset, • Experience with structured problem solving, root cause analysis, and hardware/software troubleshooting What Sets Us Apart? SRCTec, LLC is a manufacturing and life cycle management company specializing in the cost-effective production of high-quality, high-reliability, advanced military electro-mechanical products. SRCTec is a wholly owned subsidiary of SRC, Inc. SRC is a not-for-profit research and development company that combines information, science, technology and ingenuity to solve “impossible” problems in the areas of defense, environment and intelligence. Across our family of companies, we apply bright minds, fresh thinking and relentless determination to deliver innovative products and services that are redefining possible®. When you join our team, you’ll be a part of something truly meaningful — helping to keep America and its allies safe and strong. You’ll collaborate with more than 1,400 engineers, scientists and professionals — with 20 percent of those employees who have served in the military — in a highly innovative, inclusive and equitable work environment. You’ll receive a competitive salary and comprehensive benefits package that includes four or more weeks of paid time off to start, 10 percent employer contribution toward retirement, and 100 percent tuition support. Total compensation for this role is market competitive. The anticipated salary range for this position based out of Syracuse, NY is estimated at $92,000 to $112,000 annually. The actual salary will vary based on applicant’s experience, skills, and abilities, geographic location as well as other business and organizational needs. SRC offers competitive benefit options, for more details please visit our website.

Job DescriptionSRC Inc. is seeking Engineering Interns for summer 2027 who will be working onsite, 40 hours a week. As an engineering intern, you will contribute to the design, development, implementation and testing of state-of-the-art radar and electronic warfare products. Based on your interests, you will be selected to work in one specialization from Systems Engineering, Embedded Design, Digital Hardware Engineering, Mechanical Engineering, RF Engineering, Machine Intelligence, Integration & Test Engineering, or Software Engineering. You will work closely with senior engineers and gain experience in creating innovative solutions tailored to our products and customer needs. You will bring your unique perspective to our multi-department teams of engineers and collaborate on designs aligned with project goals and requirements. What You'll Do Systems Engineer: • Assist in system-level design and architecture for complex engineering projects, • Support system development, integration, validation, and troubleshooting in laboratory and operational environments, • Develop and document technical specifications and system requirements, • Model, simulate, and analyze system functionality and performance using MATLAB, Python, and/or other toolsEmbedded Design:, • Design, develop, implement, test and optimize firmware using VHDL/Verilog, • Work with FPGAs and System-on-Chips (SoCs) to develop electronic warfare and radar systems, • Learn and apply FPGA design principles including RTL design, verification, logic synthesis, prototyping, and timing analysis, • Use Python, TCL and other scripting languages to automate continuous development, continuous integration (CI/CD) workflows Digital Hardware Engineer:, • Contribute to the design, simulation, and testing of digital hardware systems, • Design circuit schematics in PADS Designer or Altium and write test firmware for boards with programmable logic using VHDL/Verilog., • Create test plans for, validate, and troubleshoot digital hardware prototypes using oscilloscopes, signal generators, logic analyzers, and other lab equipment Mechanical Engineer:, • Aid in the creation of complex mechanical drawings, parts, and assemblies, • Analyze mechanical designs to ensure they meet system-level design requirements, • Collaborate closely with engineers and technicians from multiple disciplines to develop and test mechanical designs for both our prototyping and manufacturing businesses RF Engineer:, • Support the RF design, development, assembly, test, and integration of advanced radar and communication systems, • Perform requirements analysis, RF architecture trades, specification development, simulation and modeling, schematic capture, PCB layout (using PADS Designer / Altium), hardware assembly, and integration and testing, • Design and characterize RF transmitters, receivers, exciters, antennas, and feed networks in the lab and in an anechoic chamber Software Engineer:, • Design and develop high-quality software solutions using an Agile workflow, • Write clean, efficient code and participate in code reviews to ensure delivery of quality products, • Communicate proposed software solutions with multi-department engineering teams., • Develop sound software engineering principles using tools such as Git, Bamboo, Sonarqube, • Adapt to new technologies and languages including Docker, Kubernetes, Rust as program needs allow Machine Intelligence Engineer:, • Develop machine learning algorithms and models to enhance product capabilities, • Analyze data to identify patterns and optimize decision-making processes, • Work with software and hardware teams to integrate AI/ML solutions into products Integration & Test Engineer:, • Participate in design requirements reviews to ensure the requirements can be tested, • Coordinate integration of subsystems and components into full systems., • Develop, execute and troubleshoot test plans and procedures to validate system functionality., • Increase testing efficiency by utilizing Python-based automated test suite., • Utilize model-based tools to define test strategies and verifications against system designs What You'll Bring, • Completion of two years of college and current enrollment in a bachelor’s degree in a relevant engineering field (e.g., Electrical, Computer, Computer Science, Software, Mechanical, or Systems Engineering), • A minimum grade point average of 3.3. Most recent transcripts are required with application (unofficial transcripts are acceptable), • A strong understanding of your engineering fields foundational concepts, • Knowledge of design, testing, and debugging techniques relevant to your field, • Ability to take initiative and proactively address challenges, • Familiarity with applicable tools and methodologies, • Ability to work collaboratively in a team environment with excellent communication skillsWhat Sets Us Apart? SRC, Inc., a not-for-profit research and development company, combines information, science, technology and ingenuity to solve “impossible” problems in the areas of defense, environment and intelligence. Across our family of companies, we apply bright minds, fresh thinking and relentless determination to deliver innovative products and services that are redefining possible®. When you join our team, you’ll be a part of something truly meaningful — helping to keep America and its allies safe and strong. You’ll collaborate with more than 1,400 engineers, scientists and professionals — with 20 percent of those employees having served in the military — in a highly innovative, inclusive and equitable work environment. You’ll receive a competitive salary and comprehensive benefits package that includes four or more weeks of paid time off to start, 10 percent employer contribution toward retirement, and 100 percent tuition support. Total compensation for this role is market competitive. The anticipated range for this position based out of Syracuse, NY is estimated at $22.00 to $26.00/hour. The actual salary will vary based on applicant’s experience, skills, and abilities, geographic location as well as other business and organizational needs. SRC offers competitive benefit options, for more details please visit our website.

Job Description SRC, Inc. is seeking a talented Intermediate Software Developer to join our Applications Engineering team. In this full‑stack development role, you’ll support the complete software development lifecycle—analysis, design, development, testing, deployment, and maintenance—of internal business applications. You’ll work in critical domains such as Configuration Management/Product Lifecycle Management (PLM) and Cost & Pricing systems, building scalable, secure applications that streamline operations and support enterprise growth. This role combines hands-on development with regular collaboration with internal business partners to translate requirements into high-quality technical solutions. What You’ll Do • Design, develop, test, deploy, and maintain business‑critical applications using C#, TypeScript/JavaScript, HTML, CSS, and SQL, and other languages, • Build and enhance web applications and services using ASP.NET, ASP.NET Core, MVC, Entity Framework, and other technologies, • Analyze system requirements and collaborate with internal users to define functional and technical specifications, • Translate business requirements into clear, scalable technical designs, • Partner with senior developers to grow expertise in platform architecture, software design patterns, and domain knowledge, • Troubleshoot and resolve issues requiring code fixes or configuration updates, • Collaborate across IT and business teams on application integration, data management, and technical debt reduction, • Support PLM/Configuration Management and Cost & Pricing systems, with opportunities to contribute to additional business domains, • Recommend modern technologies and best practices to improve system performance, reliability, and user experience, • Work with software vendors to resolve technical issues and optimize system capabilities, • Build strong relationships with business stakeholders to understand processes, challenges, and improvement opportunities What You’ll Bring • Education: Bachelor’s degree in computer science, engineering, or related field, or equivalent experience, • Experience: 2+ years of professional experience developing software solutions, • Proficiency with Visual Studio or comparable IDEs, • Strong hands‑on experience with C#, JavaScript/TypeScript, HTML, CSS, SQL, • Experience developing full‑stack web applications and web services using ASP.NET/ASP.NET Core/MVC and Entity Framework, • Strong communication, problem‑solving, and analytical skills, • Ability to work independently and collaboratively in a fast‑paced, evolving environment Ways to Stand Out • Experience with Git and Azure DevOps, • Experience with React, Node.js, and front-end libraries such as jQuery or Bootstrap, • Familiarity with build tools such as NPM, Webpack, Gulp, or Grunt, • Experience with unit testing frameworks like NUnit or Jest, • Strong understanding of software development best practices, CI/CD, and version control workflows What Sets Us Apart? SRC, Inc., a not-for-profit research and development company, combines information, science, technology and ingenuity to solve “impossible” problems in the areas of defense, environment and intelligence. Across our family of companies, we apply bright minds, fresh thinking and relentless determination to deliver innovative products and services that are redefining possible®. When you join our team, you’ll be a part of something truly meaningful — helping to keep America and its allies safe and strong. You’ll collaborate with more than 1,400 engineers, scientists and professionals — with 20 percent of those employees who have served in the military — in a highly innovative, inclusive and equitable work environment. You’ll receive a competitive salary and comprehensive benefits package that includes four or more weeks of paid time off to start, 10 percent employer contribution toward retirement, and 100 percent tuition support. Total compensation for this role is market competitive. The anticipated salary range for this position based out of Syracuse, NY is estimated at $93,000 to $110,000 annually. The actual salary will vary based on applicant’s experience, skills, and abilities, geographic location as well as other business and organizational needs. SRC offers competitive benefit options, for more details please visit our website. #CJ

Job Description Hidden Level is transforming airspace safety with innovative, scalable drone detection and airspace technology. We provide real-time, actionable data to enhance security across various environments. As we expand, we're looking for a Production Test Engineer to play a crucial role in designing, developing, and implementing manufacturing processes and systems through all stages of the product lifecycle. Location: This position is onsite in the East Syracuse, NY office. Responsibilities: • Develops and leads PCA and System level test plans and fixtures, qualifying product and manufacturing requirements, • Provides troubleshooting and technical support for production activities, • Develops and maintains manufacturing work instruction methods, operation sequences, and processes from creation to release via the change control processes, • Analyzes processes, production data, and quality indicators using statistical methods to determine root causes and improves workflows with corrective and preventive actions, • Qualifies test fixtures and equipment to ensure accurate result to requirements, • Utilizes lean principles to formulate and implement strategies that streamline operations, improves productivity, and reduces manufacturing cost, • Collaborates with cross-functional teams and coordinates new product releases, • Performs time studies and estimates manufacturing costs; provides and executes solutions for relevant tooling and process improvements, • Performs process validation and qualification activities, • Creates and maintains process documentation and production work instructions for new and existing products, • Investigates and resolves production, quality, and equipment issues What We’re Looking For: • Strong analytical and problem-solving skills, • Excellent communication and teamwork driven, • Experience with tooling and fixtures for testing RF and digital printed circuit boards Required Qualifications: • Bachelor of Science (BS) degree in Electrical, Mechanical, Manufacturing, or Industrial Engineering (Electrical preferred), • 3+ years of experience, some exposure to a manufacturing or related environment required, • Proficiency in MATLAB and Python Scripting/Programming, • Ability to interpret and navigate mechanical CAD drawings, 3D models, and schematics, • Experience with tooling and fixtures for testing RF and digital printed circuit board assemblies (Spectrum Analyzers, Power Supplies, Signal Generators), • Knowledge of PCBA (RF and Digital), wire/cable, and final assembly processes, • Ability to travel 10% Preferred Qualifications: • Lean/Six Sigma Black Belt or Green Belt certification preferred, • Familiarity with Manufacturing Execution Systems, preferably TIP QA/SFE Compensation and Benefits: Hidden Level offers a competitive salary and a comprehensive benefits package, including health insurance, paid parental leave, flexible time off, 401(k) with employer contributions, life insurance, disability insurance, and potential stock options. Salary Range: The salary range for this position is estimated at $94,000 to $114,000 annually. Please note that the salary information is a general guideline only. Hidden Level considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer. Equal Opportunity Employer: Hidden Level is an Equal Opportunity Employer. We consider all qualified applicants for employment without regard to race, color, religion, national origin, sex, pregnancy, sexual orientation, gender identity, age, veteran status, disability, or any other status protected by applicable federal, state, or local law. Security Note: Due to the nature of Hidden Level’s technology, only U.S. citizens can be considered for this position. Hidden Level Employees must be able to obtain and maintain a U.S. Government Security Clearance, if required for the position. Please click here to review the National Security Clearance Adjudicative Guidelines.

Job Description Mechanical Engineer Intern – Summer 2027 At Hidden Level, we’re building the future of airspace awareness through cutting-edge RF sensing technology. Our mission is to make the world safer—whether it’s protecting troops, securing infrastructure, or enabling smarter cities. We design, manufacture, and deploy advanced sensor systems that deliver real-time insights for defense and commercial applications. Position Overview: As we expand, we're looking for a Mechanical Engineer for Summer 2027. As an intern you will gain hands-on experience with our custom hardware products. You can expect to gain meaningful technical experience while helping us accelerate our product development, production, and deployment of our state-of-the-art sensor network. Location: This position is onsite in the Syracuse, NY office. As a Mechanical Engineering Intern, you will… • Evaluate next generation hardware, analyze results and make recommendations to the design team., • Collaborate across engineering disciplines to design and develop advanced sensor products., • Work in a motivated, cross-disciplinary team passionate about solving challenging problems and delivering results., • Receive mentorship, guidance, and constructive feedback from experienced engineers. Responsibilities: • Use 3D solid modeling to design mechanical solutions for tightly controlled enclosures and fixtures, • Assist with or perform structural, thermal, and other failure analyses to meet environmental and structural requirements, • Optimize designs for feasibility, manufacturability, cost, thermal performance, strength-weight efficiency, and ease of assembly, • Create and maintain cable assemblies/harnesses and other peripheral interface designs, • Solve design challenges using a variety of materials and fabrication methods including plastics, composites, metals, 3D-printing, machining, etc., • Define, maintain, and communicate requirements to 3rd-party fabrication houses and work closely with them through component and product delivery, • Perform design verification and integration of new components and support field testing, • Author assembly instructions and drawings in support of in-house production, • Aid with the management of bills of material (BOM) and other production and fabrication artifacts, • Review hardware parts for obsolescence and identify suitable replacements, • Assist with or provide information in support of project planning, execution, and oversight Required Qualifications: • Enrolled in an accredited degree program majoring in Mechanical Engineering., • Completed Sophomore year or greater by Summer 2027., • A minimum grade point average of 3.4. Recent transcript is required with application (unofficial transcripts are acceptable), • Ability to work in a fast-paced environment and overcome technical challenges through teamwork and collaboration., • Strong desire to learn and great communication skills., • Some experience using 3D CAD modeling tools such as SolidWorks Hourly Rate Range: The hourly rate range for this position is estimated at $23 to $26 per hour. Please note that the salary information is a general guideline only. Hidden Level considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer. Equal Opportunity Employer: Hidden Level is an Equal Opportunity Employer. We consider all qualified applicants for employment without regard to race, color, religion, national origin, sex, pregnancy, sexual orientation, gender identity, age, veteran status, disability, or any other status protected by applicable federal, state, or local law. Security Note: Due to the nature of Hidden Level’s technology, only U.S. citizens can be considered for this position. Hidden Level Employees must be able to obtain and maintain a U.S. Government Security Clearance, if required for the position. Please click here to review the National Security Clearance Adjudicative Guidelines.

Job Description Senior Manager, Manufacturing, Test & Service Engineering At Hidden Level, we’re building the future of airspace awareness through cutting-edge RF sensing technology. Our mission is to make the world safer—whether it’s protecting troops, securing infrastructure, or enabling smarter cities. We design, manufacture, and deploy advanced sensor systems that deliver real-time insights for defense and commercial applications. Position Overview: The Senior Manager, Manufacturing, Test & Service Engineering leads the engineering functions that support production, test, installation, service, and repair of Hidden Level products. This leader is accountable for the performance, capability, and continuous improvement of these functions, including ensuring the processes, tools, documentation, and technical resources required to scale effectively are in place and operating effectively. This role is accountable for the technical transition of products from development into repeatable production and for sustaining those products throughout their operational lifecycle. The Senior Manager drives manufacturing and test readiness, quality, throughput, troubleshooting, serviceability, and lifecycle support while providing both leadership and hands-on technical contribution as needed. Success requires the ability to coach teams, build scalable processes, solve complex technical problems, develop procedures and tooling, and support deployments. The Senior Manager is accountable for outcomes regardless of whether work is performed directly, delegated, or delivered cross functionally, and must retain the technical capability, judgment, and willingness to engage directly when it improves outcomes or strengthens team capability. Location: This position is located onsite in East Syracuse, NY Responsibilities: Manufacturing Engineering • Lead the Manufacturing Engineering function supporting Hidden Level hardware products from new product introduction through full-rate production., • Own manufacturing readiness and production engineering activities associated with new products, product revisions, and engineering changes., • Ensure effective development, maintenance, and continuous improvement of manufacturing processes, routings, work instructions, assembly methods, tooling, fixtures, and production test processes. Partner with Development Engineering Teams to support designed for manufacturability, assembly, testability, and serviceability., • Participate in Design for Manufacturing, Assembly, Test, and Service (DFM/DFA/DFT/DFS) reviews., • Establish manufacturing readiness criteria and ensure required documentation, tooling, equipment, software, training, and test capability are available prior to production release., • Support configuration management and Engineering Change Order implementation to ensure changes are introduced into production in a controlled manner., • Analyze production constraints, defects, test failures, and process variation and implement sustainable corrective actions., • Support capacity and production planning through analysis of labor content, equipment capacity, test capacity, takt time, cycle time, and process constraints., • Partner with Supply Chain and suppliers on manufacturing issues involving PCBAs, mechanical assemblies, components, and other critical hardware. Production Test & Tooling • Working with development engineering, own the manufacturing readiness and lifecycle management of manufacturing tooling, fixtures, test equipment, and associated technical documentation., • Develop and improve production test strategies that efficiently verify product performance while maintaining appropriate quality controls., • Ensure test stations, fixtures, and tooling are scalable, maintainable, calibrated where required, and appropriately controlled., • Identify opportunities to automate manufacturing and test processes where automation improves quality, repeatability, throughput, or traceability., • Establish standard methods for troubleshooting production failures and capturing failure information., • Work with Engineering teams to improve diagnostic capability and reduce time required to isolate manufacturing defects. Service & Depot Engineering • Establish and lead the technical processes supporting depot repair, field returns, troubleshooting, refurbishment, and product service activities., • Establish and maintain a structured service and depot triage process, including unit inspection, power on evaluation, diagnostic execution, configuration verification, and functional testing to efficiently identify and resolve known failure modes., • Establish tiered troubleshooting and escalation processes for units that cannot be resolved through initial triage., • Ensure troubleshooting guides, diagnostic procedures, repair instructions, test procedures, and service documentation are developed and maintained to enable consistent diagnosis and resolution of known issues., • Establish repair and disposition criteria for known failure modes, including repair, rework, return-to-vendor, and escalation to development engineering for evaluation, and other appropriate dispositions., • Establish standardized failure codes, repair codes, and service data collection practices to ensure recurring failure modes are identified and communicated effectively., • Drive improvements in diagnostic coverage and serviceability by translating recurring failure modes and service data into actionable feedback for Quality, Product and Engineering teams., • Own the field validation, documentation, and lifecycle management of specialized deployment/installation tools, fixtures, test equipment, and installation aids., • Define standardized deployment/installation tool kits/BOMs, including required quantities, calibration requirements, spares, consumables, packaging, and replenishment requirements., • Develop and control installation procedures, assembly instructions, torque requirements, cable/connector practices, sensor alignment methods, mounting methods, and other engineering-controlled installation requirements., • Develop and maintain configuration-controlled installation, commissioning, troubleshooting, acceptance test, tooling, and training documentation necessary to enable Hidden Level personnel and authorized third-party installers to safely and consistently deploy Hidden Level products., • Establish installer qualification requirements, technical boundaries, required installation evidence, and escalation criteria to ensure third-party installations meet Hidden Level engineering and quality standards., • Provide engineering escalation when the deployment/installation team encounters hardware, integration, installation, test, or configuration problems that cannot be resolved through standard procedures., • With Technical Support, define how as-deployed hardware configuration, serial numbers, firmware/software versions, modifications, and other configuration attributes are captured and maintained., • Support root cause investigations for significant or recurring field failures. Quality & Continuous Improvement • Partner with Quality to investigate manufacturing and field failures using structured root cause and corrective action methodologies., • Support Nonconformance, Material Review Board, Corrective Action, and Preventive Action processes as required., • Analyze manufacturing and service data to identify recurring failure modes, systemic issues, and improvement opportunities., • Drive Lean and continuous improvement initiatives across manufacturing and service engineering., • Establish standardized work and engineering controls that reduce process variation and improve repeatability., • Support Hidden Level’s ISO 9001 Quality Management System and applicable configuration, documentation, and process-control requirements., • Ensure manufacturing and service engineering processes generate appropriate objective evidence and traceability. Systems, Data & Metrics • Ensure manufacturing and service processes are appropriately represented within Hidden Level's enterprise systems and production workflows., • Partner with Operations, Supply Chain, Quality, Configuration Management, and IT on integration of engineering processes with Deltek Costpoint MRP, shop-floor execution, PLM, and related systems., • Develop dashboards and metrics that provide visibility into manufacturing and service performance., • Use operational data to prioritize engineering resources and continuous improvement activities. Leadership Responsibilities • Build, develop, and lead a high-performing Manufacturing & Service Engineering organization., • Establish clear roles, responsibilities, priorities, and technical ownership across the team., • Develop engineering standards and repeatable processes that enable Hidden Level to scale without creating unnecessary operational complexity., • Balance production support, service support, new product introduction, and longer-term process improvement priorities., • Develop staffing, tooling, equipment, and capital requirements necessary to support production and service growth., • Coach engineers and technicians in structured problem solving, root cause analysis, manufacturing engineering, and troubleshooting methodologies., • Establish strong working relationships across Operations, Engineering, Quality, Supply Chain, Configuration Management, Programs, Deployment, and Customer Service., • Serve as an escalation point for significant manufacturing and service-related technical issues. Required Qualifications: • Bachelor's degree in mechanical engineering, Electrical Engineering, Manufacturing Engineering, Industrial Engineering, Systems Engineering, or a related technical discipline., • 7+ years of experience in manufacturing engineering, hardware engineering, production engineering, service engineering, or related technical operations., • 7+ years of experience leading engineers in a manufacturing environment, • Demonstrated experience supporting the transition of complex hardware products from engineering development into production., • Experience developing manufacturing processes, work instructions, tooling, fixtures, and production test methods., • Strong troubleshooting and root cause analysis experience involving complex electromechanical or electronic systems., • Experience supporting engineering changes and configuration-controlled hardware., • Demonstrated ability to use manufacturing and service data to identify problems and drive measurable improvements., • Strong cross-functional leadership and communication skills., • Ability to operate effectively in a fast-growing environment where production systems and organizational capabilities are being developed concurrently., • Experience with radar, RF, aerospace, defense, telecommunications, or other complex electronic hardware. Preferred Qualifications: • Master's degree in systems engineering, • Experience with printed circuit board assemblies and electronics manufacturing., • Experience supporting depot repair, RMA, field service, or product lifecycle support operations., • Experience with ERP/MRP and product lifecycle management systems; Deltek Costpoint experience is beneficial., • Experience with Lean Manufacturing, Six Sigma, or structured continuous improvement methodologies., • Experience working within an ISO 9001-certified Quality Management System., • Familiarity with DoD manufacturing environments and applicable FAR/DFARS requirements., • Experience developing automated test systems, diagnostic tools, or manufacturing software., • Experience scaling manufacturing operations from low-rate production toward significantly higher production volumes. Compensation and Benefits: Hidden Level offers a competitive salary and a comprehensive benefits package, including health insurance, paid parental leave, flexible time off, 401(k) with employer contributions, life insurance, disability insurance, and potential stock options. Salary Range: The salary range for this position is estimated at $134,000 to $175,000 annually. Please note that the salary information is a general guideline only. Hidden Level considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer. Equal Opportunity Employer: Hidden Level is an Equal Opportunity Employer. We consider all qualified applicants for employment without regard to race, color, religion, national origin, sex, pregnancy, sexual orientation, gender identity, age, veteran status, disability, or any other status protected by applicable federal, state, or local law. Security Note: Due to the nature of Hidden Level’s technology, only U.S. citizens can be considered for this position. Hidden Level Employees must be able to obtain and maintain a U.S. Government Security Clearance, if required for the position. Please click here to review the National Security Clearance Adjudicative Guidelines.

Job Description Hidden Level is transforming airspace safety with innovative, scalable drone detection and airspace technology. We provide real-time, actionable data to enhance security across various environments. Hidden Level is seeking a mission-driven, technically adept Solutions Architect to join our growing Products and Programs team. This individual will serve as a cross-functional force multiplier, combining domain expertise in sensor technologies and concepts with sharp communication skills to drive high-quality proposals, technical demonstrations, mission architectures, and customer engagements. This role includes a dynamic and mission-critical travel component, with approximately 25%–30% travel annually (roughly 12–15 weeks per year). In partnership with Program Management, you will serve as the technical lead for product demonstrations and live flight events. You’ll often be on-site as the subject matter expert, ensuring technical solution integrity, supporting execution, and representing Hidden Level in customer-facing environments. Location: Syracuse, NY (Hybrid preferred). Fully remote candidates will also be considered. Responsibilities: Technical Solutioning and Proposal Development • Lead technical solutioning and mission architecture development for customer opportunities, including authorship of technical volumes for RFI/RFP responses, white papers, and other customer-facing deliverables., • Translate complex technical concepts into compelling, customer-aligned solutions., • Collaborate with Sales, Marketing, Engineering, and Product to shape win themes, technical discriminators, and architecture narratives. Demo & Engagement Leadership • Lead technical solution planning for emerging product demos, live flight events, and customer trials, ensuring the architecture and configuration align with customer objectives and product roadmap., • Serve as a front-line technical expert during DoD, federal, and enterprise customer engagements., • Provide technical direction and system requirements to cross-functional teams in support of demonstration readiness., • Partner with the Program Managers to prepare for events, define technical success criteria, and ensure readiness for execution. Capture & Pre-Sales Engineering • Provide technical support to business development efforts, from early shaping to final proposal submission., • Participate in customer discovery conversations and requirements definition efforts. Internal Coordination & Enablement • Be the bridge between Products, Engineering, and Sales, ensuring solution integrity, feasibility, and alignment with roadmap., • Independently own technical solutioning for Hidden Level products, coordinating with Product Managers, Engineering, and others as necessary. Required Qualifications: • Bachelor's or Master’s degree in Engineering, Computer Science, Physics, or a related technical discipline., • Minimum 7+ years of experience with at least 3 years in RF sensing, ground-based radar, C-UAS, ISR, or related technology domains., • Proven success in technical proposal writing and solution architecture., • Strong technical leadership skills with the ability to influence cross-functional teams and drive solution alignment., • Experience with in-field testing, validation, and demonstration of technical articles, • Excellent verbal communication with comfort and capability of interfacing with senior government customers., • Eligible for a U.S. security clearance (or current clearance preferred)., • Ability to travel 25-30% domestic & international Compensation and Benefits: Hidden Level offers a competitive salary and a comprehensive benefits package, including health insurance, paid parental leave, flexible time off, 401(k) with employer contributions, life insurance, and disability insurance. The company also provides a remote or hybrid work environment and potential stock options. Salary Range: The salary range for this position is estimated at $140,000 to $180,000 annually. Please note that the salary information is a general guideline only. Hidden Level considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer Equal Opportunity Employer: Hidden Level is an Equal Opportunity Employer. We consider all qualified applicants for employment without regard to race, color, religion, national origin, sex, pregnancy, sexual orientation, gender identity, age, veteran status, disability, or any other status protected by applicable federal, state, or local law. Security Note: Due to the nature of Hidden Level’s technology, only U.S. citizens can be considered for this position.

Job Description We are looking for a Senior R&D Engineer to join our Research & Development team at Bluefors in Syracuse, NY. In this role, you will contribute to the design, development, and testing of advanced cryogenic systems that operate at extremely low temperatures and enable groundbreaking innovations in quantum computing, aerospace, healthcare, energy, and scientific research. This is an exciting opportunity for an experienced engineer who enjoys solving complex technical challenges, conducting hands-on laboratory work, and collaborating with multidisciplinary teams to bring next-generation cryogenic technologies from concept to reality. Interested? Keep reading! Your responsibilities will include designing and developing cryogenic products and scientific instruments using CAD software such as SolidWorks while translating research concepts into functional prototypes and production-ready designs. You will conduct research to advance cryogenic technologies, perform detailed thermal, hydraulic, and structural analyses, and develop engineering solutions based on experimental data. In this role, you will build, assemble, validate, and test complex cryogenic mechanical and electrical systems, develop and execute comprehensive test plans, and generate engineering drawings utilizing GD&T principles. You will also create Bills of Materials (BOMs), Standard Operating Procedures (SOPs), and technical reports while operating, troubleshooting, and maintaining cryogenic equipment including dilution refrigerators, vacuum pumps, cryocoolers, and compressors. Working closely with scientists and cross-functional engineering teams, you will support project planning, ensure compliance with applicable safety and engineering standards, and contribute to continuous improvement initiatives. We are looking for a candidate with a Master's degree in Mechanical Engineering, Chemical Engineering, Physics, or a related field, with a Ph.D. strongly preferred. You should have a minimum of three years of hands-on laboratory or industrial experience in cryogenics or a closely related field. The ideal candidate will possess a strong understanding of thermodynamics, fluid mechanics, heat transfer, and materials science at cryogenic temperatures. Experience with CAD software, engineering simulation tools, and laboratory instrumentation—including oscilloscopes, multimeters, network analyzers, vacuum systems, and P&ID—is essential. Experience working with dilution refrigerators or similar cryogenic systems is highly desirable. You should demonstrate excellent analytical, problem-solving, communication, and collaboration skills while maintaining a strong commitment to quality and safety. We also appreciate candidates who possess experience with cryogenic system prototyping, pressure systems, laboratory safety programs, or relevant engineering certifications such as OSHA. Experience working in multidisciplinary R&D environments, managing technical projects, and presenting research findings will help you stand out. A proactive approach to innovation, strong organizational skills, and a passion for continuous learning are highly valued. Candidates who embody Bluefors' workplace competencies—including teamwork, attention to detail, dependability, adaptability, diversity, organizational effectiveness, and safety—will thrive in this role. We offer you an interesting, challenging, and responsible position, along with the support of a highly skilled and growing organization. This is an excellent opportunity for your professional growth in a dynamic, enthusiastic, and collaborative team where we work together to develop innovative cryogenic technologies that advance science and industry. We foster a multicultural work environment with room to grow, where you can apply your expertise while continuing to develop your technical and professional skills. We offer a generous benefits package including health, dental, vision, 401(k), long- and short-term disability, life insurance, training, tuition reimbursement, and Paid Time Off (PTO). Location: Syracuse, NY Salary Range: Level I - $68K - $98K Level II - $98K - $128K Main Responsibilities include the following: Design and develop cryogenic products and scientific instruments using CAD software (SolidWorks) Translate research concepts into functional prototypes and production-ready designs Conduct research to advance cryogenic technologies and evaluate emerging concepts Perform thermal, hydraulic, structural, and engineering analyses to support product development Build, assemble, validate, and test cryogenic mechanical and electrical systems Develop and execute test plans to verify system performance, reliability, and safety Create detailed engineering drawings utilizing GD&T principles Generate Bills of Materials (BOMs), technical reports, and Standard Operating Procedures (SOPs) Operate, troubleshoot, and maintain cryogenic equipment including dilution refrigerators, cryocoolers, compressors, and vacuum systems Diagnose system failures and implement corrective actions Collaborate with scientists and cross-functional engineering teams including mechanical, electrical, and software engineering Support project planning, scheduling, and resource allocation for R&D initiatives Ensure compliance with OSHA, ASME, and other applicable engineering and safety standards Promote safe laboratory practices and continuous improvement initiatives Perform additional duties as assigned What We Expect from You Master's degree in Mechanical Engineering, Chemical Engineering, Physics, or a related field required Ph.D. strongly preferred Minimum of three years of laboratory or industrial experience in cryogenics or a related engineering field Strong understanding of thermodynamics, fluid mechanics, heat transfer, and materials science at cryogenic temperatures Proficiency with CAD software such as SolidWorks Experience using engineering simulation and analysis tools Experience with laboratory equipment including oscilloscopes, multimeters, and network analyzers Knowledge of vacuum systems and P&ID documentation Experience developing engineering drawings using GD&T Strong analytical and problem-solving skills Excellent written and verbal communication skills Ability to effectively communicate technical concepts and research findings Ability to work independently and collaboratively within multidisciplinary teams Strong organizational and project management skills Commitment to workplace safety and engineering excellence Excellent command of English, both written and spoken We Also Appreciate Experience with dilution refrigerators or similar cryogenic systems Experience with cryogenic product development and laboratory testing Industry safety certifications such as OSHA Experience with pressure systems and related engineering certifications Experience managing technical research projects Strong presentation and technical documentation skills Passion for innovation and continuous learning Adaptability in a fast-paced research and development environment Strong alignment with Bluefors workplace competencies including teamwork, safety, diversity, organizational effectiveness, and continuous improvement Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk, reach with hands and arms, and use hands and fingers for laboratory, engineering, and testing activities. The employee is regularly required to communicate verbally and visually inspect equipment and test results. The employee may occasionally stoop, kneel, or crouch. The employee must frequently lift and/or move up to 10 pounds, occasionally lift and/or move up to 25 pounds in laboratory or office environments, and occasionally lift and/or move up to 50 pounds in manufacturing settings. Specific vision abilities required include close vision, color vision, depth perception, and the ability to adjust focus. Work Environment This position operates in both professional office and laboratory/manufacturing environments. The role regularly collaborates with internal and external stakeholders while maintaining confidentiality as appropriate. Daily work includes the use of computers, engineering software, laboratory instrumentation, quality measurement equipment, and cryogenic systems. Employees working in manufacturing or laboratory settings may be exposed to moving mechanical parts, temperature extremes, airborne particles, vibration, and electrical hazards. Mandatory personal protective equipment (PPE) must be worn as required. Employees are expected to maintain a safe, clean, and organized work environment while adhering to all company safety policies and applicable engineering standards. This role does not offer sponsorship for work authorization. Bluefors Cryocooler Technologies, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration regardless of disability status, veteran status, or any other New York State or federally protected characteristic.

Job Description SRCTec LLC, is seeking a Principal Systems Test Engineer. As a Principal Systems Test Engineer, you will play an integral role in the production, test, and sustainment for radar, CUAS, and electronic warfare systems as part of Advanced Manufacturing. You will work closely with experienced engineers and guide junior engineers to develop and sustain accurate, repeatable, and stable manufacturing test capabilities. You will collaborate with diverse, cross-functional teams of hardware, software, and manufacturing, and product engineers and stay at the cutting-edge of electronics manufacturing. What You’ll Do • Design test strategies, test architectures, and test plans that ensure repeatability and robustness, driven from, and in alignment with, system requirements, • Leverage strong proficiency in statistical analysis and data modeling to interpret test results, identify root causes, quantify variation, and validate performance margins. This includes familiarity with DOE, regression, multivariate analysis, and statistical process control, • Use capability in measurement system analysis (MSA), including GR&R, calibration strategy, uncertainty quantification, and sensor/instrument selection to maximize test coverage and performance, • Interpret specification flow-downs and trace system performance requirements to measurable, testable parameters for manufacturing tests, including a translation of how subsystem behavior, component tolerances, and environmental factors influence end‑to‑end system performance, • Develop system and subsystem test procedures while ensuring subsystem test coverage minimizes system level failures, • Evaluate trade studies, system architectures, algorithms, system requirements, and design specifications to improve product and process accuracy, repeatability, and yield, • Troubleshoot system‑level issues using advanced root‑cause analysis techniques; drive corrective actions across engineering and manufacturing teams, • Perform system simulations, modeling, and data analysis (via MATLAB and/or Python) to identify product and process improvement opportunities, • Develop production test software using NI LabVIEW, TestStand, and Python, • Maintain knowledge of and proficiency with the latest systems engineering technologies and tools, • Provide technical leadership and mentorship to junior engineers, fostering their growth and development in production systems engineering What You’ll Bring • Bachelor's degree in Electrical Engineering, Systems Engineering, or related technical field; Master's degree preferred, • 12+ years of experience in system-level testing, integration, and/or verification within aerospace, defense, or other highly regulated industries, • Deep understanding of systems engineering principles and a corresponding ability to develop test strategies for complex RF products, • Hands-on experience with automated test systems, data analysis, system debug, and performance optimization, • Familiarity with model-based systems engineering, digital threads, and digital test environments, • Ability to work collaboratively in a cross-functional team environment, with excellent written and verbal communication skills, • Some travel (<10%) may be required to provide support for field tests, demonstrations, and customer meetings What Sets Us Apart? SRC, Inc., a not-for-profit research and development company, combines information, science, technology and ingenuity to solve “impossible” problems in the areas of defense, environment and intelligence. Across our family of companies, we apply bright minds, fresh thinking and relentless determination to deliver innovative products and services that are redefining possible®. When you join our team, you’ll be a part of something truly meaningful — helping to keep America and its allies safe and strong. You’ll collaborate with more than 1,400 engineers, scientists and professionals — with 20 percent of those employees who have served in the military — in a highly innovative, inclusive and equitable work environment. You’ll receive a competitive salary and comprehensive benefits package that includes four or more weeks of paid time off to start, 10 percent employer contribution toward retirement, and 100 percent tuition support. Total compensation for this role is market competitive. The anticipated salary range for this position based out of Syracuse, NY is estimated at $155,000 to $165,000 annually. The actual salary will vary based on applicant’s experience, skills, and abilities, geographic location as well as other business and organizational needs. SRC offers competitive benefit options, for more details please visit our website.

Job Description Bluefors is the industry standard for ultra-low temperature cooling solutions used in quantum technology. Our systems empower companies to solve the world’s greatest challenges — and help transform the future. We offer reliable, industry-leading cryogenic measurement systems, cryocoolers and groundbreaking cryogenic products that allow physicists and scientists to consistently work at cryogenic temperatures. Interested? Keep reading! We’re seeking a hands-on, technically skilled and detail-oriented Engineering Technician – R&D to join our growing team. This position provides an exciting opportunity to work alongside engineers and plant leadership in the development of new cryogenic products and prototypes. The ideal candidate enjoys hands-on technical work, troubleshooting, precision measurement and working collaboratively in a fast-paced manufacturing and R&D environment. As an Engineering Technician – R&D, you will report to the Specialty Projects Manager while working with guidance from engineering and plant leadership. You will support the development, assembly, testing and troubleshooting of new cryogenic products and prototypes, while helping bridge the gap between engineering and production. We offer you an interesting, challenging, and responsible position, along with the support of a highly skilled and growing organization. This is an excellent opportunity for your professional growth in a dynamic, enthusiastic, and collaborative team where we work together and support each other. We foster a multicultural work environment with room to grow, where you can use your potential and further develop your engineering skills. We offer a generous benefits package including health, dental, vision, 401(k), long- and short-term disability, life insurance, training, tuition reimbursement, and Paid Time Off (PTO). Location: Syracuse, NY Pay range: $22-$38/hr. (DOE) Main responsibilities include the following: • Assemble, test and troubleshoot new cryogenic products and prototypes, • Set up and verify measurement equipment and various test beds, • Correspond with engineers to revise drawings and recommend assembly processes, • Work with Production to build prototypes and perform training during new product handoffs, • Review documentation of test results for assigned projects with engineers and suggest changes to improve system performance, • Report on progress, problems and solutions for assigned projects, • Perform additional responsibilities as assigned What we expect from you • Associate degree in Engineering, Technology or a related field required; or certification from a trade school, • Minimum 10 years of applicable manufacturing experience required, • Minimum 2 years of TIG welding experience required, • Two years of cryogenic manufacturing, assembly, test or repair experience preferred, • Advanced ability to read and interpret engineering drawings, • Basic manual machining and precision measurement abilities, • Basic wiring and electrical assembly experience, • Advanced mathematical skills, including algebra, trigonometry and graphing, • Excellent problem-solving and analytical capabilities, • Strong attention to detail, • Excellent verbal and written communication skills, • Strong teamwork and communication skills for cross-functional collaboration, • Ability to clearly present research findings and technical information, • Ability to work effectively in a fast-paced, change-oriented environment We also appreciate • Welding and fabrication experience, • Hands-on experience with cryogenic manufacturing and equipment, • Strong mechanical aptitude, • Ability to work independently while collaborating effectively with others, • Positive and hands-on attitude, • Strong commitment to quality and safety, • Desire for continuous learning and technical development Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk, reach with arms and hands, and have hand and finger dexterity. The employee is regularly required to see, talk and hear. In an office setting, the employee may occasionally stoop, kneel or crouch. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. In the manufacturing setting, the employee may occasionally lift and/or move up to 50 pounds. Work Environment This position operates in a manufacturing environment and interacts mostly with internal customers in a professional, courteous and cooperative manner. Mandatory PPE must be worn as required. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to humid conditions, fumes or airborne particles, heat, cold, risk of electrical shock and vibration. The noise level in the work environment is usually moderately loud. This role does not offer sponsorship for work authorization. Bluefors Cryocooler Technologies, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration regardless of disability status, veteran status, or any other New York State or federally protected characteristic

Job Description We are looking for a Mechanical Engineer to join our engineering team at Bluefors in Syracuse, NY. In this role, you will support the engineering, manufacturing, and quality organizations by developing products, improving existing designs, and creating and maintaining critical engineering and production documentation. This is an excellent opportunity for an engineer who enjoys hands-on problem-solving, product development, CAD design, and working closely with manufacturing teams in a high-tech environment. Interested? Keep reading! Your responsibilities will include creating and maintaining engineering documentation such as product manuals, production work instructions, bills of materials (BOMs), engineering project folders, product models, and technical drawings. You will assist with and lead design projects for Bluefors' core product lines, including product improvements and new product development, while supporting product life cycle management. You will generate, modify, and maintain 3D models, 2D CAD schematics, P&IDs, and 2D drawings using Autodesk Inventor and other Autodesk products. In addition, you will support drafting and design activities, conduct validation and verification testing of products and prototypes, evaluate products at various stages of production, and compile and analyze statistical data to support product quality and reliability. You will also maintain a presence on the manufacturing floor and serve as an important communication link between Engineering and Production. You will work closely with Engineering, Production, and Quality teams to ensure documentation and drawings are complete, current, and properly maintained in accordance with Bluefors' Quality Management System. You will participate in manufacturing quality audits, support corrective actions, and help resolve engineering and production issues in a timely manner. We are looking for a candidate with a bachelor's degree in Mechanical Engineering or Manufacturing Engineering from an accredited university or college. A minimum of three years of experience in a manufacturing environment is preferred. You should be proficient with CAD programs such as Autodesk Inventor, SolidWorks, or AutoCAD and be able to read and interpret technical engineering drawings. Strong proficiency with Microsoft Office and 3D modeling software is expected. The ideal candidate will have strong attention to detail, excellent troubleshooting and problem-solving skills, and the ability to manage multiple priorities in a changing environment. Strong written and verbal communication skills, initiative, and the ability to plan, organize, and prioritize work are also important for success in this role. We also appreciate candidates who have experience with electrical systems, machining equipment, ISO, UL, or PED compliance requirements. Strong knowledge of GD&T and ASME standards will help you stand out. Experience working directly with manufacturing and quality teams, as well as hands-on experience using a variety of tools and equipment, is highly valued. The ideal candidate will be a self-starter who enjoys taking ownership of projects, solving technical problems, and continuously improving products and processes. Candidates who align with our values of quality, collaboration, dependability, adaptability, diversity, and safety will thrive in this role. We offer you an interesting, challenging, and responsible position, along with the support of a highly skilled and growing organization. This is an excellent opportunity for your professional growth in a dynamic, enthusiastic, and collaborative team where we work together and support each other. We foster a multicultural work environment with room to grow, where you can use your potential and further develop your engineering skills. We offer a generous benefits package including health, dental, vision, 401(k), long- and short-term disability, life insurance, training, tuition reimbursement, and Paid Time Off (PTO). Location: Syracuse, NY Pay range: $73,000-$110,000 annually (DOE) Main Responsibilities include the following: • Create and maintain engineering documentation, including product manuals, production work instructions, BOMs, engineering project folders, product models, and drawings, • Assist with and lead design projects for Bluefors core product lines, including product improvements and product development, • Support product life cycle management activities, • Generate, modify, and maintain 3D models, 2D CAD schematics, P&IDs, and 2D drawings using Autodesk Inventor and other Autodesk products, • Assist drafting and engineering teams in developing product designs using Autodesk Inventor, • Conduct validation and verification testing for selected products and prototypes, • Test selected products at specified stages of the production process to evaluate performance and adherence to specifications, • Compile and evaluate statistical data to support product quality and reliability, • Support Engineering and Production teams with technical and documentation needs, • Ensure engineering and production documentation and drawings are complete, current, and stored appropriately in accordance with the Quality Management System, • Maintain a regular presence on the manufacturing floor, • Serve as a communication link between Engineering and Production, • Participate in Manufacturing Quality audits, • Work with Engineering, Production, and Quality teams to resolve corrective actions in a timely manner, • Troubleshoot technical issues and support continuous product and process improvement, • Perform additional duties as assigned What We Expect from You • Bachelor's degree in Mechanical Engineering or Manufacturing Engineering from an accredited university or college, • Minimum of three years of experience in a manufacturing environment preferred, • Proficiency with CAD programs such as Autodesk Inventor, SolidWorks, or AutoCAD, • Ability to read and interpret technical engineering drawings, • Excellent command of Microsoft Office Suite and 3D modeling software, • Strong attention to detail and ability to manage multiple priorities, • Strong troubleshooting and problem-solving skills, • Ability to work effectively in a change-oriented environment, • Ability to plan, organize, and prioritize tasks effectively, • Self-starter with initiative, drive, and determination, • Strong written and verbal communication skills, • Proficiency using a variety of hand tools, • Machining equipment experience is a plus, • Ability to collaborate effectively with Engineering, Production, and Quality teams, • Ability to align with company Leadership Principles and workplace competencies We Also Appreciate • Electrical experience or background, • Knowledge of ISO, UL, or PED compliance requirements, • Strong working knowledge of GD&T, • Knowledge of ASME standards, • Experience with product development and product life cycle management, • Experience supporting manufacturing quality audits and corrective actions, • Hands-on manufacturing or machining experience, • Experience developing and maintaining technical documentation, • Experience working in a high-tech or precision manufacturing environment, • A proactive approach to troubleshooting and continuous improvement, • Strong organizational and project management skills, • A collaborative, team-oriented mindset, • A positive and hands-on attitude Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, and walk, reach with arms and hands, and use hand and finger dexterity. The employee is regularly required to see, talk, and hear. In an office setting, the employee may occasionally stoop, kneel, or crouch. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. In the manufacturing setting, the employee may occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, depth perception, and the ability to adjust focus. Work Environment This job operates in and out of a professional office environment and may involve work in both office and manufacturing settings. This position interacts with internal and external customers in a professional and courteous manner while maintaining confidentiality as needed. The role routinely uses standard office equipment such as computers, phones, filing cabinets, and copiers. When working in the manufacturing environment, the employee is frequently exposed to moving mechanical parts and may occasionally be exposed to humid conditions, fumes or airborne particles, heat, cold, electrical shock hazards, and vibration. The noise level in the work environment is usually moderately loud. Mandatory personal protective equipment (PPE) must be worn as required. This role does not offer sponsorship for work authorization. Bluefors Cryocooler Technologies, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration regardless of disability status, veteran status, or any other New York State or federally protected characteristic.

Job Description At Hidden Level, we’re building the future of airspace awareness through cutting-edge RF sensing technology. Our mission is to make the world safer—whether it’s protecting troops, securing infrastructure, or enabling smarter cities. We design, manufacture, and deploy advanced sensor systems that deliver real-time insights for defense and commercial applications. Position Overview: As we expand, we're looking for a Senior Mechanical Engineer to join our team to help us accelerate our product development initiatives. Location: We do our best work together! This role is primarily onsite in Syracuse, NY, with some flexibility to work remotely when the role and schedule allow. Responsibilities: • Derive and document Mechanical system requirements working collaboratively with multiple technical disciplines, • Use 3D solid modeling to design mechanical solutions for tightly controlled enclosures and fixtures, • Perform structural, thermal, and other failure analyses to meet environmentaland structuralrequirements, • Optimizedesigns for feasibility, manufacturability, cost, thermal performance, strength-weight efficiency, and ease of assembly, • Create andmaintaincable assemblies/harnesses and other peripheral interface designs, • Solve design challenges using a variety of materials and fabrication methods including plastics, composites, metals, 3D-printing, machining, etc., • Define,maintain, and communicate requirements to 3rd-party fabrication houses and work closely with them throughcomponentand product delivery, • Perform design verification and integration of new components and support in-field testing, • Author assembly instructions and drawings in support of in-house production, • Aid with the management of bills of material (BOM) and other production and fabrication artifacts, • Review hardware parts for obsolescence andidentifysuitable replacements, • Develop and provide information in support of project planning, execution, and oversight What We’re Looking For: • A desire to own project assignments and work creatively and collaboratively on cross-disciplinary teams to deliver solutions that impress our customers and move our industry forward., • An open-minded approach to solving challenges, and proactive development of backup plans to ensure the team can hit the mark even whenencounteringthe unexpected., • A mindset trainedonlong-term goals andobjectives, balanced with making demonstratable incremental steps along the way to meet the pace of our industry., • Excellent written and verbal communication skills to efficiently convey complex ideas, coupled with an ability to listen, question, and understand stakeholder needs. Required Qualifications: • Bachelor's degree in Mechanical Engineering, • 5+years of professional experience, • Proficiencywith 3D CAD modeling tools, • Proficiencywith performing thermal and structural analysis, detailed tolerance studies, dimensional fits and clearances analysis, and environmental hardening, • ProficiencyinutilizingGeometric Dimensioning and Tolerancing (GD&T) to convey requirements on drawings, • Ability to work in a fast-paced environment and overcome technical challenges through teamwork and collaboration Preferred Qualifications: • Experience with the design and development ofhardened electronics enclosures, • Experience providing design oversight and detailed mechanical design review feedback, • Experience with strict configuration management and design control, • Experience with the following (or similar):, • Design and implementation of radar, communication, and other sensor systems, • SolidWorks 3D modeling software, • FEA simulation using ANSYS software, • Configuration management systems such as SolidWorks Product Data Management (PDM) Compensation and Benefits: Hidden Level offers a competitive salary and a comprehensive benefits package, including health insurance, paid parental leave, flexible time off, 401(k) with employer contributions, life insurance, disability insurance, and potential stock options. Salary Range: The salary range for this position is estimated at $113,000 to $140,000 annually. Please note that the salary information is a general guideline only. Hidden Level considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer. Equal Opportunity Employer: Hidden Level is an Equal Opportunity Employer. We consider all qualified applicants for employment without regard to race, color, religion, national origin, sex, pregnancy, sexual orientation, gender identity, age, veteran status, disability, or any other status protected by applicable federal, state, or local law. Security Note: Due to the nature of Hidden Level’s technology, only U.S. citizens can be considered for this position. Hidden Level Employees must be able to obtain and maintain a U.S. Government Security Clearance, if required for the position. Please click here to review the National Security Clearance Adjudicative Guidelines.

Job Description Position Overview: Hidden Level is transforming airspace safety with innovative, scalable drone detection and airspace technology. We provide real-time, actionable data to enhance security across various environments. As we expand, we're looking for a Mechanical Engineer to join our team to help us accelerate our product development initiatives. Responsibilities: • Use 3D solid modeling to design mechanical solutions for tightly controlled enclosures and fixtures, • Assist with or perform structural, thermal, and other failure analyses to meet environmental and structural requirements, • Optimize designs for feasibility, manufacturability, cost, thermal performance, strength-weight efficiency, and ease of assembly, • Create and maintain cable assemblies/harnesses and other peripheral interface designs, • Solve design challenges using a variety of materials and fabrication methods including plastics, composites, metals, 3D-printing, machining, etc., • Define, maintain, and communicate requirements to 3rd-party fabrication houses and work closely with them through component and product delivery, • Perform design verification and integration of new components and support field testing, • Author assembly instructions and drawings in support of in-house production, • Aid with the management of bills of material (BOM) and other production and fabrication artifacts, • Review hardware parts for obsolescence and identify suitable replacements, • Assist with or provide information in support of project planning, execution, and oversight What We’re Looking For: • A desire to own project assignments and work creatively and collaboratively on cross-disciplinary teams to deliver solutions that impress our customers and move our industry forward., • An open-minded approach to solving challenges, and proactive development of backup plans to ensure the team can hit the mark even when encountering the unexpected., • A mindset trained on long-term goals and objectives, balanced with making demonstratable incremental steps along the way to meet the pace of our industry., • Excellent written and verbal communication skills to efficiently convey complex ideas, coupled with an ability to listen, question, and understand stakeholder needs. Required Qualifications: • Bachelor's degree in Mechanical Engineering, • 0 - 5 years of professional experience, • Proficiency with 3D CAD modeling tools, • Ability to work in a fast-paced environment and overcome technical challenges through teamwork and collaboration, • 10% travel Preferred Qualifications: • Experience with the design and development of hardened electronics enclosures, • Experience providing detailed mechanical design review feedback, • Proficiency with performing thermal and structural analysis, detailed tolerance studies, dimensional fits and clearances analysis, and environmental hardening, • Experience with strict configuration management and design control, • Experience with the following (or similar):, • Design and implementation of radar, communication, and other sensor systems, • SolidWorks 3D modeling software, • FEA simulation using ANSYS software, • Geometric Dimensioning and Tolerancing (GD&T), • Configuration management systems such as SolidWorks Product Data Management (PDM) This position is located in the Syracuse, NY office with the potential for hybrid arrangements. Compensation and Benefits: Hidden Level offers a competitive salary and a comprehensive benefits package, including health insurance, paid parental leave, flexible time off, 401(k) with employer contributions, life insurance, and disability insurance. The company also provides a remote or hybrid work environment and potential stock options. Salary Range: The anticipated salary range for this position based out of Syracuse, NY is estimated at $84,000 to $90,000 annually. Please note that the salary information is a general guideline only. Hidden Level considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer. Equal Opportunity Employer: Hidden Level is an Equal Opportunity/ Affirmative Action employer. All qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category. Security Note: Due to the nature of Hidden Level’s technology, only U.S. citizens or Green Card holders can be considered for this position.

Online Consumer Panels America is a consulting firm that specializes in product testing and product development work. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products wou

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25/hr. and $45/hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. Online Consumer Panels America is a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. • Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.), • Take care of the product being tested and use it responsibly, • Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.), • Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses), • There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm, • Write reviews as requested in the In-Home Usage Test Daily Schedule for each project, • Ability to follow specific instructions, • Excellent attention to detail and curious spirit, • Be able to work 15-25 hours per week and commit to a certain routine, • Have access to a computer and a reliable internet connection, • Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. • Very competitive pay rate, • Weekly pay, • Work around your own schedule, • Learn about an exciting industry, • Telecommute (you can work from home, work or school), • Most of the time you can keep the product you tested

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25/hr. and $45/hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. Online Consumer Panels America is a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. • Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.), • Take care of the product being tested and use it responsibly, • Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.), • Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses), • There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm, • Write reviews as requested in the In-Home Usage Test Daily Schedule for each project, • Ability to follow specific instructions, • Excellent attention to detail and curious spirit, • Be able to work 15-25 hours per week and commit to a certain routine, • Have access to a computer and a reliable internet connection, • Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. • Very competitive pay rate, • Weekly pay, • Work around your own schedule, • Learn about an exciting industry, • Telecommute (you can work from home, work or school), • Most of the time you can keep the product you tested

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25/hr. and $45/hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. Online Consumer Panels America is a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. • Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.), • Take care of the product being tested and use it responsibly, • Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.), • Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses), • There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm, • Write reviews as requested in the In-Home Usage Test Daily Schedule for each project, • Ability to follow specific instructions, • Excellent attention to detail and curious spirit, • Be able to work 15-25 hours per week and commit to a certain routine, • Have access to a computer and a reliable internet connection, • Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. • Very competitive pay rate, • Weekly pay, • Work around your own schedule, • Learn about an exciting industry, • Telecommute (you can work from home, work or school), • Most of the time you can keep the product you tested

Job DescriptionDescription: Perform various types of welding operations and weld a variety of standard and Customized product weldments from prefabricated sheet metal components. BENEFITS: • Health Insurance, • Life Insurance, • Flexible Spending Account, • 401K, • 401K Matching, • 80 hours PTO Vacation, • 40 hours PTO Sick, • 11 Paid Holidays, • Up to $700 reimbursement for Vision or Dental claims for employee or immediate family member. SCHEDULE: M-F 6:00am-2:30pm or M-Thurs 1:00pm-11:30pm ESSENTIAL JOB FUNCTIONS: • Perform welding operations based on interpreting shop records and drawings and assemble and measurement details., • Work from shop drawings and sketches to set up workstation for specific jobs., • Manipulate welding gun and lay proper fill or bead to meet and satisfy pressure testing requirements., • Follow quality control standards to ensure meeting quality and quantity requirements., • Obtain first piece inspection approval and periodically visually inspect and/or gauge work for quality appearance and dimensional accuracies., • Perform grinding operations to dress the appearance of weldments., • To maintain continuous movement of work, use hand truck, lift truck, lift hoist or overhead crane to move material to and from storage, staging areas, or workstation., • Perform daily lift truck inspections, • Read and accurately interpret measuring devices, • Act as authorized employee for the lock out / tag out program, • Adhere to established safety rules and policies., • Perform other duties as assigned.Requirements:, • High school diploma or general education degree (GED) and 3 years work experience., • Meet production quantity requirements., • Possess and demonstrate positive mentoring and leadership qualities., • Good oral and written communication skills., • Successful participation in training events (ie; Lockout/Tagout; HazCom; and overhead crane training), • Treat all co-workers with dignity and respect., • Possess basic math skills., • Possess basic organizational skills.

Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25/hr. and $45/hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. Online Consumer Panels America is a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. • Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.), • Take care of the product being tested and use it responsibly, • Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.), • Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses), • There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm, • Write reviews as requested in the In-Home Usage Test Daily Schedule for each project, • Ability to follow specific instructions, • Excellent attention to detail and curious spirit, • Be able to work 15-25 hours per week and commit to a certain routine, • Have access to a computer and a reliable internet connection, • Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. • Very competitive pay rate, • Weekly pay, • Work around your own schedule, • Learn about an exciting industry, • Telecommute (you can work from home, work or school), • Most of the time you can keep the product you tested

We're Looking For \n\n • Experience: 8+ years in product certification, regulatory compliance, verification/validation, or test engineering.\n, • Education: Bachelor’s degree in Electrical Engineering, Electronics Engineering, or a related discipline.\n, • Core Expertise: Strong hands-on background in UL product safety standards, pre-compliance testing, and technical report writing.\n, • Preferred Bonus Skills: Experience with UL 60730-1, NEC codes, FCC/IC/CE requirements, test fixture/jig development, and US-based manufacturing environments.\n\n \n Key Responsibilities \n\n • Lead Certification & Compliance: Drive product certification strategies, perform gap analysis, and manage end-to-end compliance for electrical/electronic systems.\n, • Lab & Agency Coordination: Own relationships with external certification and testing laboratories (UL/CSA) and support formal testing.\n, • Test Engineering & Strategy: Develop test plans, execute environmental/reliability testing, and support End-of-Line (EOL) electrical testing and production test setups.\n, • Root-Cause Troubleshooting: Investigate test failures, debug PCBA and system-level issues, and collaborate closely with Hardware, Embedded, Mechanical, and Quality teams.\n\n \n

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25/hr. and $45/hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. Online Consumer Panels America is a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. • Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.), • Take care of the product being tested and use it responsibly, • Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.), • Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses), • There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm, • Write reviews as requested in the In-Home Usage Test Daily Schedule for each project, • Ability to follow specific instructions, • Excellent attention to detail and curious spirit, • Be able to work 15-25 hours per week and commit to a certain routine, • Have access to a computer and a reliable internet connection, • Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. • Very competitive pay rate, • Weekly pay, • Work around your own schedule, • Learn about an exciting industry, • Telecommute (you can work from home, work or school), • Most of the time you can keep the product you tested

Online Consumer Panels America is a consulting firm that specializes in product testing and product development work. Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries,

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25/hr. and $45/hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. Online Consumer Panels America is a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. • Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.), • Take care of the product being tested and use it responsibly, • Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.), • Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses), • There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm, • Write reviews as requested in the In-Home Usage Test Daily Schedule for each project, • Ability to follow specific instructions, • Excellent attention to detail and curious spirit, • Be able to work 15-25 hours per week and commit to a certain routine, • Have access to a computer and a reliable internet connection, • Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. • Very competitive pay rate, • Weekly pay, • Work around your own schedule, • Learn about an exciting industry, • Telecommute (you can work from home, work or school), • Most of the time you can keep the product you tested

Sysco has immediate job openings for dependable CDL A Shuttle Delivery Truck Drivers to safely and efficiently operate a tractor-trailer and transport doubles (potentially triples) between Sysco facility and shuttle yards. You may be required, on an as-needed basis, to unload/deliver various products to customer locations on an assigned route schedule. Requirements • 21+ years of age., • Pass employment testing, • Commercial Vehicle Drivers must have the ability to read and speak the English language sufficiently to converse with the general public, to understand highway traffic signs and signals in the English language, to respond to official inquiries, and to make entries on reports and records. Certificates, Licenses, and Registrations • Valid Class A Commercial Driver license with a driving record that meets company insurability standards., • Doubles/Triples Endorsement preferred Physical Demands • Touch freight may need to lift, push or move product weighing an average of 40-60 pounds and as much as 100 pounds occasionally., • CDL A Shuttle Delivery Truck Drivers are home daily., • Excellent pay., • Paid vacation and holidays., • Comprehensive healthcare benefits., • Generous retirement benefits., • Employee discount programs., • Discounts on Sysco stock (SYY) where applicable, • Ongoing training and career growth opportunities., • Uniforms., • More benefits, too many to name. Sysco is more than just a place to work. Our passion for food and our customers has made us the industry leader. To remain on top, we will continue to think bigger, work harder and never give up. Are you ready to drive success as a Sysco CDLA Shuttle Delivery Truck Driver? Apply today! Sysco is the global leader in foodservice distribution. With over 71,000 colleagues and a fleet of over 13,000 vehicles, Sysco operates approximately 333 distribution facilities worldwide and serves more than 700,000 customer locations. We offer our colleagues the opportunity to grow personally and professionally, to contribute to the success of a dynamic organization, and to serve others in a manner that exceeds their expectations. We're looking for talented, hard-working individuals to join our team. Come grow with us and let us show you why Sysco is at the heart of food and service. Applicants must be currently authorized to work in the United States. We are proud to be an Equal Opportunity and Affirmative Action employer, and consider qualified applicants without regard to race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, disability, veteran status or any other protected factor under federal, state or local law. This opportunity is available through Sysco Corporation, its subsidiaries and affiliates.

Prior experience as a Staff QA Engineer, Lead QA Engineer, Quality Engineering Lead, SDET Lead, Founding QA Engineer, or QA Architect. We are hiring a Senior QA Engineer / Quality Engineering Lead to own quality assurance, testing strategy, product validation, and release readiness across ARBI and A

Our rigorous approach to product design, testing, and data science leads to accurate assessments of our outcomes and challenges us to constantly improve our tools. Collaborate cross-functionally with product, research, and data science teams to develop features from participation in requirements def

Job DescriptionCompany Description INFICON is a leading provider of innovative instrumentation, critical sensor technologies, and Smart Manufacturing/Industry 4.0 software solutions that enhance productivity and quality of tools, processes, and complete factories. These analysis, measurement and control products are essential for gas leak detection in air conditioning/refrigeration and automotive manufacturing. They are vital to equipment manufacturers and end-users in the complex fabrication of semiconductors and thin film coatings for optics, flat panel displays, solar cells and industrial vacuum coating applications. Other users of our vacuum-based processes include the life sciences, research, aerospace, packaging, heat treatment, laser cutting and many other industrial processes. We also leverage our expertise in vacuum technology to provide unique, toxic chemical analysis products for emergency response, security, and environmental health and safety. Job Description The Manufacturing Technician plays a key role on the production floor, performing hands-on assembly, testing, and rework with a focus on quality, accuracy, and on-time delivery. Assemble and repair products that meet or exceed quality, customer, and company goals. We're open to candidates interested in either 1st shift, 2nd shift, or a weekend shift. Essential Job Duties Assemble, repair, and rework assemblies and circuit boards efficiently with minimal supervision, producing thorough and exact output Assemble and test mechanical components using test equipment, fixtures, engineering drawings, and Manufacturing Assembly Procedure (MAP) instructions Perform in a fast-paced manufacturing environment while maintaining high quality and on-time delivery Perform functional testing on products using specialized test equipment Support all areas of the production floor as required Perform data collection using Microsoft Office products and current data collection methods Maintain inventory and perform transactions accurately using our inventory control system Qualifications Basic Job Skills Mechanical aptitude or hands-on experience in a similar environment a plus, but not required Familiarity with hand tools, measuring devices, or electrical equipment a plus Strong fine motor skills Ability to follow written and verbal instructions High attention to detail Ability to work in a cleanroom environment with an understanding of cleanliness standards Basic computer skills a plus Behaviors & Ways of Working Strong work ethic — this is our most important requirement Willingness to learn, grow, and develop new skills Works well both independently and as part of a team Dependable and consistent daily attendance Drive to meet and exceed established goals Education and/or Experience We encourage candidates at all experience levels to apply. We value what you bring to the table — whether that is formal education, hands-on experience, or simply a proven track record of hard work and reliability. Experienced Level: · Associate degree in Mechanical Technology or a related field preferred · 3+ years of experience in a manufacturing environment may be considered in lieu of a degree · Also helpful, though not required: · 1+ years of experience in mechanical and/or electrical assembly · Soldering experience or certification · SAP or inventory system experience Entry Level: · Entry-level candidates are welcome and encouraged to apply, no prior manufacturing experience required · What matters most: strong work history, a positive attitude, and a genuine willingness to learn and grow · Acceptance at this level is subject to interviewer discretion based on demonstrated work ethic and potential. This level begins in our introductory program, which includes an assessment period with the potential for increased compensation upon successful completion Certifications / License Mechanical Technology Certification preferred but not required Physical Requirements Requires standing and/or sitting for extended periods Must be able to lift, carry, or move up to 20 pounds frequently Additional Information A reasonable estimate of the current range is: $18.50-$24.00 per hour. In addition, INFICON employees are eligible for a profit-sharing bonus with a target of 10% as well as 401K match up to 8% (vesting schedule). The actual compensation will be determined based on experience, location, and other factors permitted by law. INFICON provides a dynamic work environment that promotes diversity, equity, and inclusion. Our employees experience ongoing green initiatives, flexible work hours, and a variety of health and wellness programs. INFICON’s forward-thinking approach offers countless opportunities to design, support, and manufacture a diverse product portfolio that expands globally. Our Lean and Agile work environment offers competitive compensation, relocation assistance, a discretionary bonus, and generous employee benefits; major medical, dental, health, vision, 401K, vacation and sick time, tuition reimbursement, and more! INFICON is committed to ensuring that our online application process provides an equal opportunity to all job seekers that apply without regard to race, religion, ethnicity, national origin, citizenship, gender, age, protected veteran status, disability status, genetic information, sexual orientation, or any other protected characteristic. A notice describing Federal equal employment opportunity laws is available here to reaffirm this commitment. Any contact that would like to request a reasonable accommodation to participate in the application process should contact us.careers@inficon.com. INFICON, Inc. strictly complies with all aspects of the Export Administration Regulations ('EAR'), including those sections dealing with deemed exports to foreign nationals.

Position Overview:As we expand, we're looking for a Senior Software Test Engineer to participate in our testing efforts and enforce quality across embedded and cloud-based systems. Collaborate closely with developers, DevOps, and product teams to ensure quality throughout the software development li

At ABB, we help industries run leaner and cleanerand every person here makes that happen. You'll be empowered to lead, supported to grow, and proud of the impact we create together. Join us and help run what runs the world. This position reports to: Area Field Services Manager As a Senior Field Service Technician, you will be responsible for delivering high-quality technical support and service to our customers. You will perform installations, maintenance, and repairs on equipment, ensuring optimal performance and customer satisfaction. The work model for this role is: Remote. Our Team Dynamics Our teams support each other, collaborate, and never stop learning. Everyone brings something unique, and together we push ideas forward to solve real problems. Being part of our team means your work matters - because the progress we make here creates real impact out there. Key Responsibilities • Ensure Safety & Compliance: Follow all ABB HSE, ABB Way, Safety Manual, and product warranty policies while maintaining up?to?date knowledge of relevant safety standards and procedures., • Technical Execution & Expertise: Perform hands?on project workincluding startup, commissioning, troubleshooting, design, and repairacross power delivery equipment while continually developing technical and industry knowledge., • Quality, Standards & Customer Satisfaction: Contribute to improving installation and field service standards, adhere to engineering procedures, and deliver exceptional customer satisfaction in all interactions., • Administrative & Cost Management: Complete required technical reports, job status updates, material orders, quotations, time and expense reports, and exercise sound judgment in controlling costs and maintaining company assets. Qualifications • High School Diploma with a minimum of 8 years of engineering / field experience. Additional formal education may substitute for required experience on a year?for?year basis., • Technical skills in testing of power distribution and delivery to include Low Voltage and Medium Voltage Breakers, Switchgear, Relays and Transformers. Experience in the repair and refurbishment of LV and MV circuit breakers, • Ability and willingness to travel approximately 70+% as required., • Ability and willingness to possess and maintain a valid driver's license., • Any offer of employment is conditioned upon the successful completion of a background investigation and drug screen., • Candidates must already have work authorization that would permit them to work for ABB in the US. What's in it for you We want you to bring your full self to workyour ideas, your energy, your ambition. You'll have the tools and freedom to grow your skills, shape your path, and take on challenges that matter. Here, your work creates impact you can see and feel, every day. ABB is an Equal Employment Opportunity and Affirmative Action employer for protected Veterans and Individuals with Disabilities at ABB. All qualified applicants will receive consideration for employment without regard to their- sex (gender identity, gender expression, sexual orientation), marital status, citizenship, age, race and ethnicity, inclusive of traits historically associated with race or ethnicity, including but not limited to hair texture and protective hairstyles, color, religious creed, national origin, pregnancy, physical or mental disability, genetic information, protected Veteran status, or any other characteristic protected by federal and state law. For more information regarding your (EEO) rights as an applicant, please visit the following websites: https://www.eeoc.gov/sites/default/files/2023-06/22-088EEOCKnowYourRights6.12ScreenRdr.pdf While base salary is determined by things such as the successful applicant's qualifications and experience, this position is expected to pay between $83,300 and $133,280 annually. ABB Benefit Summary for eligible US employees [excludes ABB E-mobility, Athens union, Puerto Rico] Go to MyBenefitsABB.com and click on "Candidate/Guest" to learn more Health, Life & Disability • Choice between two medical plan options: A PPO plan called the Copay Plan OR a High Deductible Health Plan (with a Health Savings Account) called the High Deductible Plan., • Choice between two dental plan options: Core and Core Plus., • Vision benefit., • Company paid life insurance (2X base pay)., • Company paid AD&D (1X base pay)., • Voluntary life and AD&D 100% employee paid up to maximums., • Short Term Disability up to 26 weeks Company paid., • Long Term Disability 60% of pay Company paid. Ability to "buy-up" to 66 2/3% of pay., • Supplemental benefits 100% employee paid (Accident insurance, hospital indemnity, critical illness, pet insurance., • Parental Leave up to 6 weeks., • Employee Assistance Program., • Health Advocate support resources for mental/behavioral health, general health navigation and virtual health, and infertility/adoption., • Employee discount program. Retirement • 401k Savings Plan with Company Contributions., • Employee Stock Acquisition Plan (ESAP). Time off ABB provides 11 paid holidays. Vacation is provided based on years of service for hourly and non-exempt positions. More about us ABB's Service Division partners with our customers to improve the availability, reliability, predictability and sustainability of electrical products and installations. The Division's extensive service portfolio offers product care, modernization, and advisory services to improve performance, extend equipment lifetime and deliver new levels of operational and sustainable efficiency. We help customers keep resources in use for as long as possible, extracting the maximum value from them, and then recovering and regenerating products and materials at the end of their useful life. Join us. Be part of the team where progress happens, industries transform, and your work shapes the world. Run What Runs the World. #ABBCareers #RunwithABB #Runwhatrunstheworld