Production technician jobs in Piscataway, New JerseyCreate job alerts

Job Description BAS / HVAC Controls Technician HVAC Controls - BAS – HVAC- Building Automation Systems- DDC Controls Our New Jersey-based full service mechanical contracting/BAS/HVAC Controls client is actively seeking to add an experienced BAS/HVAC Controls Service Technician with the ability to install, service, trouble shoot and repair building automation systems. Programming & commissioning experience a plus. Compensation is competitive & commensurate with experience. Geographic service areas include Central and Northern New Jersey Benefits: Medical, Dental and Vision Insurance, Basic Life, Short-Term and Long-Term Disability, 401(k) with Employer Matching contributions, Paid Time Off, Paid holidays, company vehicle and additional incentives! Qualifications • Two or more (2) years of BAS/DDC control systems experience installing, troubleshooting and repair of HVAC/ automated control systems which control HVAC equipment such as AHUs, VAVs, chillers, boilers, and VRF systems, • Interpret control drawings, wiring diagrams, and sequences of operation, • Ability to read & interpret mechanical & electrical blueprints, • Program and modify controllers i.e. (Niagara, JCI, Siemens, Honeywell, etc.), • Support retrofits, upgrades, and service calls, • Strong understanding of HVAC systems, DDC controls, energy management systems, • Experience with common BAS platforms, • Valid driver’s license and ability to travel locally, • Programming or commissioning Distech DDC controllers a plus, • Familiar with BACnet architecture, • Niagara exposure Alex Showers Liberty Personnel Services #Controls #Associate LI-AS1 Key Words: (HVAC, Building Automation, Controls, Field Service Technician, Installation, Maintenance, Service, Commercial systems, Distech, Tridium Automated Logic, Carrier, Johnson Controls, Trane, Andover Building Automation, BAS, DDC, BAC, BAU, Direct Digital Controls, MRI, LON, LonWorks, BACnet, MODbus, Johnson Controls, Delta Controls, Honeywell, Tridium, Alerton, Building Automation Technician, Building Automation Service, Building Automation Engineer, Staefa, Solidyne, Andover Controls, Siemens, Carrier, Trane, York, ME, Mechanical Engineering, HVAC, HVAC Controls, ASHRAE, Boiler, Boilers, Chillers, RTU’s, Roof Top Units, Split Systems, MEP, Project Engineer, Project Manager, LEED, CEM, CEP, Certified Energy Manager, Certified Energy Professional, ATC, ATC Controls, Automatic Temperature Controls, Invensys, Metasys, Automated Logic, Schneider Electric, TAC, Siemens, Niagara AX, Building Automation Graphics, EBI, Symmetre, EMS, BMS, temperature controls) Company DescriptionLibertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move! Hundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month. Established in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on: Information Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.Libertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move!\n\nHundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month.\n\nEstablished in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on:\n\nInformation Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.

Job DescriptionAbout Us: We are a rapidly-growing food manufacturer specializing in ready-to-eat meals, salads, and side dishes. With our most recent expansion to a new facility, we are seeking a talented Maintenance Mechanic/Technician to secure uninterrupted production processes and provide technical support to the production staff. This position is for the first shift starting at 7.30pm and ending around 5pm. As a company committed to delivering high-quality food products to our customers, we are looking for a dynamic individual who can effectively manage multiple tasks and set correct priorities. Knowledge, skills, tasks, responsibilities: • Ability to familiarize yourself with existing machinery as well as connect/setup new machinery as required, • Fix basic breakages such as walls, leaking pipes, connectors, bearings, lights and other mechanical issues, • Experience with basic Industrial Electricity, able to trace and identify electrical sources and identify voltage. Experienced changing Motor, Contactors, Starters, Relays, and other electrical components frequently used in an industrial environment., • Knowledge and basic understanding of PLC’s, VFD’s, and Servo Motors., • Experience with Pneumatic and Hydraulic systems, including understanding of basic system components., • Basic Welding Skills, • Basic Plumbing Skills, • Must be able to read Technical Manuals and Mechanical and Electrical Drawings/Schematics., • Proficient in the use of hand and power tools commonly found in typical maintenance shops., • Experience of Safe Work Practices of an Industrial Mechanic. Familiarity of OSHA safety standards and regulations., • Must be able to stand for 8 hours, able to lift heavy objects (50 lbs), use ladders, work in hot or cold conditions., • Must be able to conduct business in a professional manner with internal and external contacts., • Spanish language knowledge is a plus., • Must have a valid Driver’s License.

Job Description About CompoSecure Founded in 2000, CompoSecure is a technology partner to market leaders, fintechs and consumers, enabling trust for millions of people around the globe. The company combines elegance, simplicity, and security to deliver exceptional experiences and peace of mind in the physical and digital world. CompoSecure's innovative payment card technology and metal cards with Arculus security and authentication capabilities deliver unique, premium branded experiences, enable people to access and use their financial and digital assets, and ensure trust at the point of a transaction. For more information, please visit and . Position Overview: With the direction of the Pre-Lam Supervisor and the support of the Pre-Lam Team Lead, the Pre-Lam Technician II (PLT II) will be responsible for performing various tasks to set up, operate, monitor, and troubleshoot, and perform preventive maintenance for assigned machines (i.e. Roll Laminators, Cutting equipment, Test Equipment, etc.). The PLT II will be responsible for inspecting parts to specifications and making adjustments or tool changes as necessary to maintain quality specifications. This position will participate in the specification, test and acceptance of additional equipment for Pre-Lam. Key Responsibilities: • Technician monitors equipment daily, performs basic cleaning, resets equipment for the next day and completes repairs for continued production., • Ability to read and follow work order operations to produce products that meet approved quality standards., • Assist in developing preventive and corrective maintenance programs., • Ensure daily, weekly and monthly periodic maintenance is completed., • Support the Lead in training of all technicians on all Pre-Lam equipment., • Properly maintains working files to ensure correct operation of equipment., • Assists the Team Lead in estimating materials, labor and equipment hours to accomplish a project., • Provides root cause analysis and resolves problems., • Maintains in-process inventory at work centers by delivering and opening materials and supplies., • Interface with scheduling to determine schedules for production., • Ensure full adherence to 5S practices at all times., • Track the achievement of production throughput against stated capacity targets., • Ensures that non-conforming material is clearly identified and segregated., • Escalate any issues to Leads immediately Other Important Responsibilities: • Engage and support companywide Safety and Cleanliness programs., • Handle related email correspondence, • Will be required to perform other job functions, as assigned. Qualifications: • A minimum 3 years (or more) of experience in a manufacturing environment, • Education, Certifications; Associate degree preferred, High School Education a must., • Proven successful history in driving organizational and departmental changes., • Experience with Visual ERP is preferred., • Excellent communication skills, both oral and written., • Strong attention to detail and ability to self-check own work., • Excellent problem-solving skills., • Microsoft Office Computer skills including solid excel skills required. Physical requirements and work environment: • Must be able to lift 50 lbs., • Must be able to sustain office work including the following:, • Sitting in an office chair, • Typing, • Reaching for the telephone, • Standing at office equipment, • Hearing for phone use, • Sight for computer use, • Must be able to sustain factory work as needed including the following:, • Standing at machinery, • Reaching and pulling to operate machinery, • Sight for machinery operation, • Walking through shop, • Office environment is of moderate noise level., • Medical, Dental & Vision Coverage, • Flexible Spending Accounts (FSA), • Company-Paid Life and Disability Insurance, • 401(k) with Company Match, • Paid Time Off & Paid Holidays, • Annual Bonus Opportunities, • Employee Assistance Program (EAP), • Career Advancement Opportunities Benefits eligibility and details will be shared during the hiring process. We're excited to support you in building a rewarding career with us. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to . CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Job DescriptionDescription: The Plant Engineer position will be responsible for leading engineering and maintenance activities at a site. Working under limited supervision, the Plant Engineer maintains production and quality by ensuring operation of machinery and the condition of the site. This position oversees skilled Technicians to maintain the facility, including grounds, buildings, equipment, and assets. The Plant Engineer will need to ensure compliance with safety, regulatory, and plant reliability to align equipment availability with operating requirements. Essential Functions: • Create a high level of equipment availability through Planned Maintenance to minimize unscheduled repairs or equipment failures as measured by the departments KPI’s., • Through daily huddles and technician coaching sessions, maintain consistent communications with plant operations for scheduling, planning, and training purposes. Meet or exceed agreed KPI’s and individual goals., • Ensures Maintenance and Project expenses and objectives under span of control are met and on budget., • Use Lean concepts to identify and implement continuous improvement and systematic problem solving to remedy root causes for improved plant performance., • Coordinates activities with management to review planned maintenance, projects, objectives, timelines, and communications within the plant., • Responsibilities may include performing research, designing smaller or large projects within financial and operational scope, and implementing these projects, or sub-sets of complex projects., • Mentor and support the development of facility operations and maintenance personnel., • Delivery and support of cost saving initiatives to accomplish productivity targets., • Active support and participation in driving reliability and safety initiatives through root cause analysis, idea generation and task execution., • Oversees Maintenance Technicians and provides ongoing training to maximize the efficiency of the work force and meet operational requirements., • Process safety stewardship in all aspects; change management, hazard analysis and abnormal situation management., • Provides mechanical maintenance information by answering questions and requests and ensures operation of machinery by completing preventive maintenance requirements by following diagrams, sketches, manuals, manufacturer's instructions, and engineering specifications and troubleshooting malfunctions., • Maintains a safe and clean working environment by complying with site level Environmental and OSHA procedures, rules, and regulations. Upholds site level Environmental and OSHA records and reports as appropriate., • Strong leadership and interpersonal skills, project management, organization, decision making ability, relationship building and interfaces well with others. Specific skill-based competencies required to satisfactorily perform the functions of the job include adhering to safety practices; and operating equipment used in technical maintenance trades., • Ability to present information to others. Specific knowledge-based competencies required to satisfactorily perform the functions of the job include safety practices and procedures, and advanced fundamentals of MEP and general building preservation., • The ability to stand, sit and/or walk repeatedly throughout most of the workday., • When in the plant, subject to the outside environment with possible exposure to extreme temperatures (heat, cold, humidity, etc.)., • Position is occasionally exposed to fumes, odors, dust, mists, airborne particles, chemicals, heights, cramped quarters, oil, grease and dirt., • Normal lifting of up to 50 pounds is possible., • Mobility is necessary in order to perform assigned functions., • Noise level is moderate to heavy as the work area is a production environment., • Position requires the ability to occasionally work different shifts to monitor plant performance., • BS in Engineering preferred with a minimum of Five years’ experience in manufacturing systems or Ten plus years of experience leading a Technical team in a manufacturing environment., • Black Seal High-Pressure Boiler Operator license., • This position requires the knowledge of hydraulics, pneumatics, electrical, electronics (PLC), hydraulics, heating ventilation, air conditioning, carpentry, welding, machining and fabricating. The position also requires proficiency in troubleshooting the before listed categories., • Technical knowledge of maintenance equipment and capital project activities and experience leading associates of various skill levels required. This description does not state or imply that the duties listed above are the only duties to be performed by the Associate. Associates are required to follow job-related instructions and perform other job-related activities requested by their supervisor. All requirements are subject to possible modifications in order to provide a reasonable accommodation to individuals with physical or mental disabilities as defined in the Americans with Disabilities Act. Some requirements may exclude individuals who pose a direct threat or significant risk to the health and safety of themselves or other Associates. Nixon Medical is an equal opportunity employer. #IND1 Requirements:

Job Description Location: New Brunswick, NJ Pay: $100,000 annually + bonus potential Type: Full-Time, Non-Exempt Shift: Third Shift (Overnight) Overview We’re searching for an experienced Maintenance Supervisor to lead a skilled team of technicians in a high-volume food production facility. This role is perfect for a hands-on leader who knows how to balance immediate troubleshooting needs with long-term reliability and preventive maintenance priorities. What You’ll Do * Lead and mentor a team of maintenance technicians on the 3rd shift. * Coordinate and assign maintenance activities through the CMMS system to ensure completion of preventive and corrective work orders. * Troubleshoot mechanical and electrical issues related to processing and packaging systems, conveyors, motors, and drives. * Apply root cause analysis and continuous improvement tools to prevent recurring issues. * Manage spare parts inventory, ensuring availability of critical components while controlling costs. * Maintain detailed maintenance logs, downtime reports, and shift handoff notes. * Ensure compliance with GMP, OSHA, and food safety standards. * Collaborate with operations, engineering, and QA to minimize downtime and maximize efficiency. Qualifications * Minimum 5 years of industrial maintenance experience, including 2+ years in a supervisory or lead role. * Strong working knowledge of CMMS systems (MP2, Fiix, eMaint, or similar). * Skilled in mechanical and electrical troubleshooting; PLC familiarity preferred. * Proven track record in root cause problem solving and data-driven maintenance. * Experience managing parts inventory and coordinating vendor support. * Excellent communication, planning, and leadership skills. * Flexibility to work 3rd shift and occasional weekends. * Background in food, beverage, or other CPG manufacturing environments preferred. Why This Role Stands Out * Modern, automated facility with expanding production lines. * Strong leadership support for maintenance improvements. * Opportunity to help shape systems, processes, and technician development. * Competitive salary, full benefits, and bonus potential. Powered by JazzHR QRvaZMWSJq

Job Description Production Dumper Interview Process: On site interview (1 round or 2 round based on the candidate's performance in interview) Purpose: The Production Dumper is responsible for loading and unloading raw materials into large bins (Hopper) to feed product into feeding conveyors according to customer specifications. Job Responsibilities: Responsible for loading the equipment (Hopper) with raw products to start production safety by using correct lifting techniques. Ensures the product flow at an optimal level at all times. Adhere to safe work practices, follow GMPs, maintain sanitary conditions, and ensure that product quality is maintained. Report to Machine Operator or Supervisor or QA/QC Technician any conditions or practices that may adversely affect food safety, food quality, or personnel safety Perform duties in accordance with Hazard Analysis Critical Points (HACCP) and Safe Quality Food (SQF) policies and procedures and follow all company guidelines. Effectively communicating relevant information to fellow employees on the shift and to on-coming employees at shift change. Must be able to stack pallets and load box feeder. Responsible for maintaining the cleanliness of the area including understanding the different types of cleanings based on the production run. Other related tasks during production operation as assigned by Supervisor, including packing when assigned Job Requirements: Education/ Certifications: (Required & Preferred) High School Diploma/GED and/or equivalent related experience Experience: Experience in a manufacturing Production environment preferred but not required System Implementation Preferred Knowledge: Understands Safety guidelines Knowledge of applicable production management system (prod) Skills/ Abilities: Must be able to work in an environment containing Tree nuts, Peanuts, Soy, Wheat, Sesame, Milk and different spices like pepper, chili, etc. Good judgment is required for this position as there may be times when direct supervision may not be immediately available Detail-oriented, good organizational skills Ability to effectively communicate with co-workers and supervisors including verbal and written instructions. Ability to operating powered equipment Dependable, responsible team player; good attendance Have an understanding of procedures in other areas of production for a more global understanding of all processes. Perform repetitive motions throughout shift such as push/pull/lift, bend continuously throughout the shift, lift up to 50 pounds, and be able to climb stairs or step up onto a platform several times throughout the shift. Ability to stand for a long period of time (duration of the shift (8 hours +). All qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity or expression, national origin, disability, or protected veteran status. UNFI is an Equal Opportunity employer committed to creating an inclusive and respectful environment for all. - M/F/Veteran/Disability. Vevraa Federal Contractor. Additional Information Schedule: Full-time

The Lead Maintenance Technician performs corrective and preventative maintenance, installation, repair and service of all mechanical and electrical systems. The Lead Maintenance Technician performs continuous improvements initiatives, troubleshooting, and mentoring/lead junior technicians. The lead Technician helps foster a culture of safety, accountability, and operational excellence across all plant maintenance activities. Essential Functions • Follow, without exception, all safety policies /safety rules, and procedures., • Follow all work instructions, both written and oral., • Required to keep shop and work areas in a safe and tidy condition, following 6S standards., • Required to perform all facility maintenance., • Ability to perform work in a mature and professional manner, demonstrate personal responsibility, and perform all assigned duties., • Ability to trouble shoot/solve mechanical breakdowns in areas consisting of old and new equipment, while communicating with production and maintenance manager., • Perform mechanical repairs and replace parts on machines such as bearings, valves, filters, gauges, switches, etc., • Perform routine preventive maintenance on all production equipment and machinery, such as a resistance welder, seamer, automated paint booth, conveyors, curing ovens, etc., • Assist in machine changeovers and start-up of machines for production needs when required., • To identify improvements, advise and correct potential problems., • Assist in maintaining safety; reduce downtime; decrease scrap; improve quality production; and improve plant efficiency., • Perform and oversee electrical troubleshooting (AC/DC motors, controls panels motor drivers, etc.), • Ability to use ladders, scissor lift, forklift, milling machine, lathes, drill presses, welder and hand tools to complete repairs., • Ability to use precision measuring devices including amp meters, electric meters, hydraulic gauges, Etc., • Lead/coach and mentor maintenance technicians fostering skilled development and productivity., • Assign daily tasks and prioritize maintenance work orders in alignment with production needs., • Teach expertise of equipment in diagnostics and trouble shoot while providing guidance and training for all maintenance techs, • Recommend process and equipment improvements and enhance safety, efficiency, and product quality., • Collaborate with management and other departments on cross functional initiatives., • Industrial Maintenance Millwright Certificate or Qualified Mechanic., • 10 years of direct hands-on experience with production equipment maintenance and repair with 3-5 of those years in a lead role., • At least 3 years of stable work history, • Electrical knowledge of 3 phase and DC systems., • Knowledge of industrial electrical, control, and instrumentation systems. Examples include control relay logic; voltage control schemes; photo-eyes; distance and pressure transducers; etc., • Ability to operate a forklift safely to eliminate personal injury and material damage., • Ability to lift 55 lbs. overhead, climb, bend, stoop, push and pull., • Must possess excellent communication skills, professional maturity, and a proactive mindset., • Requires good eye/hand/foot coordination., • Good visual acuity – cannot be colorblind., • Must be able to stand for extended periods., • Must be able to work in cold, heat and dusty environment; it includes occasional work outside in the elements., • Ability to safely operate all equipment and tools. Mauser Packaging Solutions offers a comprehensive benefits package, including medical, dental , paid time off, and other competitive benefits. Do you want to work with people who are dedicated to innovation and making the world a better place? Do you want to build a career with a company that provides opportunities for growth and development? Mauser Packaging Solutions is that company. Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team. At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers better—and help them be better stewards of the environment. Whether you’re a seasoned professional—or just beginning your career—there’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. Benefits: Mauser Packaging Solutions offers a comprehensive benefits package, including medical, dental, paid time off, and other competitive benefits.

Job Description We're looking for Autobody Preppers with a minimum of 3 years of professional automotive bodywork experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As a Experienced Auto Body Repair Technician, you'll be expected to perform bodywork on multiple panels, including: • Heavy plastic welding, • Minor metal pulling, • Roof and rocker panel repair At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Pay Rate is $23-$30 per hour DOE. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs Not a match for this role? We have a variety of prep roles available, depending on your experience - look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers: • Entry-Level Prepper (min 1 year professional experience): perform light bodywork, including prepping, sanding, and buffing vehicles, removing and installing bumpers, single panel repair (including Bondo repair), and minor plastic welding, • Mid-Level Prepper (min 3-5 years professional experience): perform bodywork on multiple panels, including heavy plastic welding, minor metal pulling, roof and rocker panel repair, stud welding, and large area heavy bodywork (including Bondo repair), • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold) To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description We're looking for Paintless Dent Repair Technicians with a minimum of 3 years of professional automotive PDR experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history, and one of the four fastest companies to make the Fortune 500. As a Mid-Level PDR Technician, you'll be expected to have experience accessing panels, use glue-pulling techniques, and repair smaller-sized dents on both steel and aluminum vehicle panels. At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs We also have a variety of other automotive roles available in one of our 18 locations across the country – take a look at our Careers site to apply for one of the following roles: • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold) To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job DescriptionAre you a highly motivated, detailed, and reliable Production Manager? Are you looking for a collision repair company that values People and Processes while working alongside those with a Passion for auto repair? This is your opportunity! If you are tired of the mediocre shop, give Don us an opportunity to take you out of the average and put you into the future of the collision repair business. Each teammate is a valued part of the repair process. We support our team with the tools and technology needed to be successful: state-of-the-art collision repair equipment, tools, and all the training you can handle. You will expand your skills while being paid! What’s in it for you? • Day one Medical, Dental, and Vision insurance options for you and your family (this includes domestic partners), • $50,000 employer-paid life insurance policy, • 401K plan with an employer match, • Employee Assistance Program includes confidential assistance in the following areas, • Counseling from relationships to stress and substance abuse, • Work/Life benefits, including personal, financial, and legal issues, • Self-Help benefits, • Peak performance coaching, • Lifestyle saving benefits for wellness, shopping, travel, • Personal development and training, • Heath savings account to assist with medical bills, • Paid time off to promote work-life balance, • 8 paid holidays, including Black Friday, and get your Birthday as a floating holiday!, • Growth opportunities within our company, • Paid training including industry certifications, I-Car & OEM The specific pay rate/salary offered to a candidate may be influenced by several factors including experience, education, specialized certifications from OEMs, and where the job is located. Job Requirements: • Plan daily collision repair production schedule to maximize efficiency and maintain cycle time, • Provide daily supervision and direction to all production staff, • Responsible for all repairs being completed correctly and following all OEM procedures, • Schedule all sublet work on time, • Maintain information within estimating software to reflect vehicles' current repair status, • Quality control all work and provide feedback and coaching to both the technician team and paint team, • Estimate drive in appointment as well as "walk in" customers and complete repair plans Skills, Qualifications & Requirements: • Must be at least 18 years of age, • Minimum of 3 years experience in automotive collision repair, • Ability to effectively communicate with others, • Ability to read and understand instructions, written estimates, and work orders, • Multi-tasking; adapt easily to fast-paced environments, • PA Appraisers License We are an equal opportunity employer and consider all qualified applicants equally without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, or disability status.

Job Description Join OEG Building Materials as an Industrial Lift Truck Service Technician OEG Building Materials, a steel manufacturing company, is looking for a hands-on technician who knows propane and diesel forklifts inside and out. If you thrive in a fast-moving plant, diagnose problems quickly, and take pride in safe, high-quality work, you’ll feel right at home here. Role Snapshot Company: OEG Building Materials Job Type: Full-time Reports To: Department Manager Location: Warehouse/industrial setting Schedule: Full-time (schedule may vary based on operational needs) Job Level: Experienced technician FLSA Status: Non-Exempt A Day in the Life Your morning may start with a planned preventive maintenance round—inspecting propane and diesel lift trucks, checking fluids, brakes, steering, and critical safety items. Midday brings a call from production: a truck is down on the floor. You arrive, quickly troubleshoot electrical or hydraulic issues, and get the unit back online to minimize downtime. In the afternoon, you might pull a transmission, swap worn components, or document work performed with precise service notes. Throughout, you communicate clearly with your manager about repair priorities and parts needs while following OSHA and company safety protocols. What You’ll Do • Diagnose, repair, and perform preventive maintenance on propane and diesel forklifts, • Troubleshoot mechanical, electrical, hydraulic, and fuel system faults, • Conduct routine inspections to ensure equipment is safe and ready for operation, • Repair or replace engines, transmissions, brakes, steering systems, and related components, • Maintain accurate service logs and maintenance records, • Comply with OSHA and company safety standards at all times, • Respond quickly to breakdowns to reduce production downtime, • Provide clear repair recommendations and status updates to management Qualifications, • Proven background as a forklift or heavy equipment mechanic, • Hands-on experience with propane and diesel forklifts (required), • Strong understanding of mechanical, hydraulic, and electrical systems, • Ability to read and interpret service manuals and schematics, • Valid driver’s license; forklift certification a plus, • Able to lift up to 50 lbs and work in warehouse or outdoor environments, • Detail-oriented with strong diagnostic and problem-solving abilities Preferred, • Trade school or technical certification in mechanical repair, • Experience across multiple forklift brands, • Welding or light fabrication experience Compensation & Benefits, • Pay: $25.00 - $32.00 per hour (non-exempt), • Health Insurance (details provided upon hire), Medical, Vision, Dental, • 401(k) with 4% company match, • Company Holidays + Jewish Paid Holidays, • 5 Sick Days (accrued annually), • 5 Vacation Days (after 3 years of service)

Job Description Card Finishing Technician About CompoSecure Founded in 2000, CompoSecure (Nasdaq: CMPO) is a technology partner to market leaders, fintechs and consumers enabling trust for millions of people around the globe. The company combines elegance, simplicity, and security to deliver exceptional experiences and peace of mind in the physical and digital world. CompoSecure's innovative payment card technology and metal cards with Arculus security and authentication capabilities deliver unique, premium branded experiences, enable people to access and use their financial and digital assets, and ensure trust at the point of a transaction. For more information, please visit and . Position Overview: This position is responsible for the set-up, repair, preventative maintenance, and operation of equipment to achieve production goals with a high level of detail and accuracy. Key Responsibilities: • Primary trainer for new hires in machine operation including documenting the training., • Lead the productivity, maintenance, and quality of the Muhlbauer equipment., • Complete responsibility of machine start-up, shut down and changeover., • Understand what the expectations are of a work order., • Set up machines as required for specific jobs including new programs, as needed., • Observe machine operations to verify accuracy of machine settings while producing a top-quality product., • Detect malfunctions or out-or-tolerance conditions., • Use precision measuring instruments such as drop gauges and push testers when setting up or adjusting machines., • Inspect "first part" and inspect work pieces throughout the production run for out-or-tolerance conditions., • Ensure Preventative Maintenance is completed and spare parts inventories are maintained., • Pull required fixtures, holding devices and materials, as required., • Minor repairs of machine within capability., • Ensure all documentation is completed properly including, computer logs, maintenance logs and accountability logs. Other Important Responsibilities: • Must be able to operate assigned equipment safely and efficiently., • Must be able to keep record of time spent and materials used., • Must be able to use precision measuring tools and equipment, read schematics, and is familiar with common measuring tools., • Timely Corrective Action response and resolution to relevant situations., • Engage and support companywide Safety and Cleanliness Programs., • Must maintain adequate levels of performance and motivation despite job tasks that are routine, repetitive and/or non-stimulating., • As part of the EMS- Environment Management System, will meet compliance obligations and accountability by contributing but not limited to the company's recycling guidelines, proper waste and other environmental performance practices, • As part of the EMS- Environment Management System, will meet compliance obligations and accountability by contributing but not limited to the company's recycling guidelines, proper waste and other environmental performance practices, • Will be required to perform other job functions, as assigned Qualifications: • A minimum 5 years or more of relevant experience, • High School or GED Diploma required, Technical School Certification/Degree Preferred, • Ability to independently troubleshoot mechanical and electrical problems using schematics and diagnostic equipment., • Must have knowledge of mathematical skills with all units of measure, using whole numbers, common fractions and decimals, • Must be capable of programming, setting up and maintaining various equipment, • Competencies with pneumatic technology and hydraulics, • Must be able to work with limited supervision and function as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved, • Must hold themselves accountable for doing whatever is needed to meet customer commitments, • Must be able to understand and carry out oral and written directives, • Must have the ability to work under pressure and to adhere to deadlines and to have the ability to be flexible, • Task oriented, ability to prioritize work load, • Enthusiastic attitude, cooperative team player, adaptable to new or changing circumstances, professional demeanor, self-motivated, creative and innovative Physical requirements and work environment: • Must be able to lift 50 lbs, • Must be able to sustain physical work for up to 12 hours per day including the following:, • Standing for up to 12 hours per day, • Reaching and pulling, • Sight, • Walking through shop, • Bending, climbing and crouching., • Shop noise levels are such that protective ear-coverings are recommended, • Short notice, overtime and some weekend demand according to production needs CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Job Description Position Summary: The Production Technician – Chemical Reagents and Kit Assembly will be responsible for manually building and assembling chemical reagents and kits. This role requires a hands-on, detail-oriented individual capable of following precise production protocols to ensure product quality and consistency. Key Responsibilities: • Kit Assembly: Manually assemble chemical reagent kits according to detailed instructions and quality standards., • Preparation of Reagents: Measure, mix, and prepare chemical reagents, adhering to all safety and quality procedures., • Quality Control: Perform routine checks to ensure that products meet specified quality standards and report any inconsistencies., • Inventory Management: Track inventory levels of materials, report shortages, and assist in ordering supplies as needed., • Documentation: Maintain accurate records of production processes, quality control checks, and inventory use., • Safety Compliance: Follow safety protocols for handling and storage of chemicals; participate in safety training. Skills Required: • Excellent attention to detail and manual dexterity., • Ability to follow precise instructions and adapt quickly to new processes., • Strong organizational skills and ability to work in a structured, process-oriented environment., • Other Requirements: Must be comfortable working with chemicals and handling materials according to safety protocols.Why Join Us?, • Competitive salary and benefits package., • Opportunity to work in a growing company with a collaborative team.

Job DescriptionJob Title: Quality Control TechnicianJob Description As a Quality Control Technician, you will play a crucial role in ensuring the effectiveness of our production processes. You will train new employees, maintain high housekeeping standards for a clean and safe workplace, and collaborate closely with Production Supervisors for seamless production handovers. Responsibilities • Train new workers to ensure they are equipped with the necessary skills and knowledge., • Maintain housekeeping standards to ensure a clean and safe workplace environment., • Collaborate with Production Supervisors to ensure effective production handovers.Essential Skills, • Bilingual in Spanish for effective communication with production staff., • Positive attitude and pleasant personality with the ability to effectively communicate with diverse populations., • Self-motivated with a results-oriented approach., • Understanding of principles, practices, and procedures in a food manufacturing environment., • Ability to lead and motivate others to achieve productivity goals.Additional Skills & Qualifications, • Experience in quality control and assurance., • Experience in food manufacturing and packaging quality. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in East Brunswick,NJ. Application Deadline This position is anticipated to close on Feb 21, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Job Description Date 10/2025 Location 1200 Airport Road, North Brunswick NJ Title Technician, R&D Formulation Department Research & Development Reports to Director, Research & Development FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Formulation Technician is responsible for supporting the formulation and manufacturing processes by accurately weighing, mixing, and processing raw materials in accordance with Standard Operating Procedures (SOPs), Good Manufacturing Practices (cGMP), and batch documentation requirements. This role involves hands-on operation and maintenance of various pharmaceutical production equipment and requires close adherence to quality, safety, and regulatory standards. Areas of Responsibility Technician, R&D -Level 1, Works under close supervision; learns formulation procedures, documentation, and equipment operation. Technician, R&D -Level 2 Works independently on complex formulation and scale-up activities; may train junior staff Technician, R&D -Level 3 Operates with minimal supervision; recognized technical expert and mentor within the R&D team. Develops and updates SOPs, batch records, and training materials. Oversees equipment readiness, preventive maintenance, and calibrations. Mentors’ technicians and ensures high-quality documentation and compliance. Supports technology transfer and production readiness reviews Key Responsibilities Level 1, 2 & 3 • Accurately weigh and transfer raw materials using calibrated balances and scales in accordance with approved batch records and formulation guidelines., • Perform formulation and manufacturing activities for pilot, scale-up, and commercial batch production., • Operate equipment for mixing, blending, granulation, and other material processing functions in support of pharmaceutical product development and manufacturing., • Complete and maintain accurate, compliant, and timely documentation, including Batch Manufacturing Records (BMRs), Logbooks, Protocols, and related forms in accordance with cGMP and SOP requirements., • Assist in the development and optimization of formulations for various dosage forms such as tablets, capsules, and granules, under the direction of senior formulation scientists or supervisors., • Independently execute and monitor benchtop, pilot-scale, and manufacturing scale-up batches with minimal supervision., • Set up, operate, clean, and perform changeovers on R&D and pilot-scale manufacturing equipment, including but not limited to:, • Tablet Presses, • Capsule Filling Machines, • Coating Machines, • Granulators, • Fluid Bed Dryers (FBDs), • Ensure equipment is properly maintained, sanitized, and operated in compliance with SOPs, safety protocols, and current Good Manufacturing Practices (cGMP)., • Proactively identify and troubleshoot issues during formulation development, demonstrating strong problem-solving skills and an ability to anticipate potential risks or failures., • Adhere strictly to all company policies, safety guidelines, and regulatory requirements., • Participate in routine housekeeping, equipment cleaning, and 5S/continuous improvement initiatives to maintain a safe and efficient working environment., • Perform additional duties and responsibilities as assigned by management to support departmental and organizational goals. Requirements Education & Qualification: Technician, R&D -1 • Requires High School diploma or GED, Associate degree preferred., • 1 to 4 years of experience working in a nutraceutical/pharmaceutical, biotech, or food manufacturing environment, regulated by GMP standards and requirements., • Specific experience in oral solid dosage manufacturing, blending, compression, pan coating, fluid bed, or encapsulation manufacturing processes will be a plus. Technician, R&D -2 • Requires High School diploma or GED, Associate degree preferred., • 6 to 10 years’ experience working in a nutraceutical/pharmaceutical, biotech, or food manufacturing environment, regulated by GMP standards and requirements., • Specific experience in oral solid dosage manufacturing, blending, compression, pan coating, fluid bed, or encapsulation manufacturing processes. Technician, R&D -3 • Associate’s or Bachelor’s degree in Chemistry, Biology, Engineering, or related scientific field, • 3 to 12 years’ experience working in a nutraceutical/pharmaceutical, biotech, or food manufacturing environment, regulated by GMP standards and requirements., • Requires hands-on experience or knowledge to set-up & operate Tablet, Capsule, Granulation manufacturing process equipment such as Tablet Press, Capsule Filling, Coating, Granulator, Fluid Bed Dryers, etc. and the ability to troubleshoot this equipment., • Utilizes problem-solving skills to investigate and troubleshoot product issues and recommend solutions for issues such as sticking, picking, capping, chipping, compressibility, delamination, etc., • Works independently or in a team assisting others., • Performs basic math calculations and follow written instructions with accuracy and pay attention to detail., • Able to follow and understand cGMP, OSHA standards etc., • Able to distinguish different shades of colors., • Intermediate user of MS Office, Excel, Word, and Outlook, • Complies with all regulatory/ in-house requirements (may include but not be limited to safety, housekeeping, laboratory chemical waste, cGMP’s, GLP, documentation) when performing the assigned activity., • The employee is frequently required to sit (50%), stand, and walk (50%) at a lab bench., • Able to lift up to 35 lbs.; occasionally lift and move up to 50 pounds., • Able to stand and walk on the production floor a minimum of 6 hours per shift., • Uses hands to finger, handle or feel, or to operate or to control objects. Able to lift up to waist height and/or above shoulder height, frequent bending from waist, or squatting, walking short distances., • Able to occasionally work on a rolling ladder or step stool, or to lean over equipment as well as kneeling on the floor to clean under the equipment., • Work is regularly performed inside a laboratory environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Employee discounts, • Free food & snacks This position is for someone whos most comfortable with tools in hand and panels opentracking down failures, replacing components, rebuilding assemblies, and getting equipment back online quickly and safely. Youll work on conveyors, motors, pumps, sensors, pneumatics, and automated equipment, and youll also handle electrical troubleshooting across 120V/208V/240V/480V systems. PLC/VFD familiarity is important, but the core need is a technician who can fix whats broken and prevent it from breaking again. Electrical license/certification is a plus. Job Summary Were seeking an experienced Electrical & Mechanical Technician to support day-to-day production by diagnosing issues, repairing equipment, and performing preventive maintenance. You will be the person who responds when a line is downlocating the fault, repairing or replacing the failed part, verifying safe operation, and documenting the fix. Youll work closely with operations and maintenance to improve reliability, reduce downtime, and keep equipment operating safely and consistently in a food manufacturing environment. The ideal candidate is practical, calm under pressure, and confident working independently on mechanical and electrical repairs in a fast-paced facility. Responsibilities • Diagnose, troubleshoot, and repair electrical and mechanical issues on food manufacturing equipment., • Work with PLCs, VFDs, motors, sensors, and automation controls to maintain and improve production efficiency., • Perform electrical installations, modifications, and upgrades for systems operating at 120V, 208V, 240V, and 480V., • Ensure compliance with all applicable electrical codes, safety standards, and best practices., • Collaborate with cross-functional teams to implement new machinery and automation projects., • Maintain detailed maintenance records and electrical schematics., • Provide technical support to production and maintenance staff., • Assist in developing preventive and predictive maintenance programs for electrical and automation systems. Qualifications • Bachelors or Masters degree in Electrical Engineering or equivalent technical training with relevant manufacturing experience., • Strong knowledge of industrial electrical systems and codes, including 120/208/240/480V applications., • Hands-on experience with PLC programming, troubleshooting, and integration., • Familiarity with VFDs, motors, conveyors, packaging machinery, and related food manufacturing equipment., • Ability to read and interpret electrical schematics and mechanical diagrams., • Electrical license or certification strongly preferred., • Strong organizational and problem-solving skills., • Ability to multitask and prioritize in a dynamic production environment.

Job Description The CNC Engineering Technician I is part of the Advanced Machining department and supports Prototype, Process Development, and other departments in bringing new products and processes from concept through validation (IQ/OQ/PQ) to customer acceptance. This role utilizes CNC equipment for all pre-Production Release (APQP Phase 3) engineering activities. After Production Release, production setup and operation transfers to union CNC personnel. This position also provides post-release troubleshooting, diagnostics, and process optimization support as needed. JOB OUTCOMES The Engineering Technician I is expected to: · Engineering Development Support – Support the development and validation of new products and processes utilizing CNC equipment under the direction of senior technicians and engineering staff · Process Documentation – Assist with documentation of engineering development processes including setup sheets, inspection data, and validation records as directed · Equipment Readiness – Perform pre-production routine equipment maintenance tasks including lubrication, chip management, and coolant system upkeep under supervision · Quality Verification – Perform inspections using precision measurement tools to verify part conformance during development and validation activities ESSENTIAL DUTIES AND RESPONSIBILITIES Engineering Project Support · Assist in monitoring progress and performance against engineering project plans; promptly report issues or delays to supervisor · Support validation activities for new tools and processes; assist in compiling validation packages for new parts, design modifications, and process changes · Work with engineering and Operations to support Production Release (APQP Phase 3), including process documentation packages and training support for union personnel · Maintain project documentation and status updates in company systems Engineering Technician Role (Pre-Production Release: Prototype, Process Development, Validation) · Set up and operate CNC equipment with Fanuc controls for prototype, process development, and product development activities prior to Production Release (APQP Phase 3), under the direction of senior technicians · Read and interpret G-code programs; make work/tool offset adjustments as directed by engineering staff to support pre-Production Release development runs · Assist with managing cutting tools, workholding fixtures, and machine parameters for pre-Production Release engineering development work under supervision · Perform precision inspections using measurement tools including comparators, micrometers, calipers, and pin gages; conduct visual inspections under microscope for surface finish and defect identification during development and validation phases · Support engineering during process validation phases including IQ, OQ, and PQ development runs by running parts and recording data as directed by senior technicians. Upon Production Release (APQP Phase 3), ongoing production setup and operation for that product/process becomes the responsibility of union personnel · Provide post-Production Release technical support to Operations including troubleshooting, diagnostics, and process optimization assistance on CNC equipment and processes as needed · Perform pre-production routine equipment maintenance including lubrication, chip management, and coolant system upkeep · Assist with maintaining engineering documentation including setup sheets, inspection reports, and process development records · Maintain 5S standards for work areas, materials, tooling, and fixtures · Support and maintain the SupplyPro inventory management system None QUALIFICATIONS EDUCATION AND EXPERIENCE · High school diploma or GED required; Associates degree or technical certification preferred · 1-3 years of hands-on CNC machining experience required · Multi-axis CNC experience preferred · Experience in medical device or highly regulated manufacturing environment preferred · Must be open to and have the ability to learn Mastercam software TECHNICAL SKILLS - REQUIRED COMPETENCIES · Knowledge of CNC equipment setup and operation with Fanuc controls · Reading and interpreting G-code programs · Blueprint reading including Geometric Dimensioning and Tolerancing (GD&T) · Proficiency with precision measurement tools: comparators, micrometers, calipers, pin gages · Visual inspection techniques including microscope use · Understanding of cutting tool selection, tooling management, and tool offset adjustments · Statistical Process Control (SPC) · Computer skills including MS Office Suite and ERP systems ADDITIONAL SKILLS (PLUS) · CAD/CAM software · Measurement Systems Analysis (MSA, GR&R) · Design of Experiments (DOE) · Minitab or similar statistical software · Six Sigma training NO Travel 10% or less. While performing the duties of this Job, the employee is regularly required to sit; and talk and hear. The employee is frequently required to stand; walk; use hands to touch, handle, or feel and reach with hands and arms. The employee must lift, push, pull, carry and/or move up to 30 pounds frequently, and between 30 and 50 pounds occasionally. While performing this Job, the employee is regularly required to demonstrate manual and spatial dexterity sufficient to operate machinery for precision work. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to vibration. The employee is occasionally exposed to wet and/or humid conditions; risk of electrical shock; and odors, dusts, mists, fumes and/or airborne particles. The noise level in the work environment is usually moderate.

Job Description The Product Technician 3 is responsible for operating production machinery in accordance with established procedures and guidelines to produce products based on the specifications outline in the Job Book The Product Technician 3 is expected to: · Produce products that meet MICRO’s quality standards and customer specifications consistently Machine Operation 60% · Operates a variety of production equipment and machinery. · Manufacture, test, inspect, package, and label products according to defined procedures and instructions as appropriate. · Uses computer-controlled equipment to select, position and secure automatic or semi-automatic machines. · Verifies material, lubricants, solvents and packaging material are correct. · Produces products that conform to all of the requirements outlined in the job book · Monitors production process during the production run · Performs maintenance activities where applicable · Stops production when product is not in conformance and follows the nonconformance procedure. Product Inspection and Nonconformance Process 40% · Reads and interprets prints located in the job book. Verifies dimensions of finished product visually and/or by using inspection equipment per customer specifications. · Keeps inspection data based on the requirements of the job book. · Completes all necessary documentation. · Uses SPC to verify conformance of products · Identifies production or quality issues and reports it to the appropriate group. This position has no talent management responsibilities. EDUCATION AND EXPERIENCE · High school diploma or general education degree (GED) is preferred. · 0-2 years of experience in a manufacturing environment or equivalent combination of education and experience is preferred LICENSE AND CERTIFICATION · None TECHNICAL SKILLS · SPC · Blueprint OTHER SKILLS · WIP tracking · Multitasking · Personal Accountability · Problem solving · Spatial dexterity · Manual dexterity · Attention to detail · Organizational skills · Basic computer skills While performing the duties of this Job, the employee is regularly required to stand; walk; sit; use hands to touch, handle, or feel; reach with hands and arms; and talk and hear. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must lift, push, pull, carry and/or move up to 10 pounds constantly, between 10 and 25 pounds frequently, and between 25 and 50 pounds occasionally. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing this Job, the employee is regularly required to demonstrate manual and spatial dexterity sufficient to operate machinery for precision work. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts and vibration. The employee is frequently exposed to risk of electrical shock and odors, dusts, mists, fumes and/or airborne particles. The employee is occasionally exposed to wet and/or humid conditions. The noise level in the work environment varies from moderate to loud, based on the department/work area.

Job DescriptionJob Title: Card Finishing Technician Work directly for a leading specialty manufacturing company in Somerset County, NJ! We are seeking a skilled Card Finishing Technician to lead machine operations, training, and quality production efforts on advanced Muhlbauer equipment. If you are mechanically inclined, quality-driven, and thrive in a hands-on manufacturing environment, this is your opportunity to grow with a stable and innovative organization. Pay: $16.83 - $33.65 per hour Key Responsibilities Train and document new hires in machine operation Lead productivity, maintenance, and quality of Muhlbauer equipment Perform machine start-up, shutdown, changeovers, and programming Inspect first-piece and in-process production for quality standards Troubleshoot mechanical and electrical issues Complete preventative maintenance and minor machine repairs Maintain logs (production, maintenance, accountability) Ensure safety, cleanliness, and environmental compliance (EMS) Use precision measuring instruments (drop gauges, push testers, etc.) Requirements Minimum 5+ years of relevant manufacturing experience High School Diploma or GED Ability to troubleshoot mechanical and electrical systems using schematics Experience programming, setting up, and maintaining production equipment Knowledge of pneumatic systems and hydraulics Strong math skills (fractions, decimals, measurements) Ability to lift up to 50 lbs Ability to work independently and meet production deadlines Strong communication and documentation skills Preferences Technical School Certification or Degree Experience training machine operators Experience working in customer-driven quality environments Prior experience with Muhlbauer or similar specialty manufacturing equipment Benefits Our employees can make an informed decision about the compensation and benefits plan that is most suitable for their current and future life needs. Competitive compensation PTO and paid holidays 401(k) with company contribution Stable, supportive work environment If you are a motivated technician ready to take ownership of equipment performance and quality output, apply today and take the next step in your manufacturing career! Disclaimer: By applying for this job, you agree to receive calls, Al-generated calls, text messages, or emails from Synerfac Technical Staffing and our contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undeliverable messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at #ZRSS

Job Description About CompoSecure Founded in 2000, CompoSecure is a technology partner to market leaders, fintechs and consumers, enabling trust for millions of people around the globe. The company combines elegance, simplicity, and security to deliver exceptional experiences and peace of mind in the physical and digital world. CompoSecure's innovative payment card technology and metal cards with Arculus security and authentication capabilities deliver unique, premium branded experiences, enable people to access and use their financial and digital assets, and ensure trust at the point of a transaction. For more information, please visit and . Position Overview: In this position, the CNC Technician is responsible for setup, troubleshooting and diagnosing problems on HAAS Vertical Machining Centers and DMG-MORI Horizontal Machining Centers. The position requires working with various CNC machines to complete setups to ensure proper machine operation and troubleshooting when machine malfunctions, to correct issues. Key Responsibilities: • Troubleshoot and diagnose problems on CNC machinery, • Strong familiarity with HAAS and DMG-MORI CNC Machining Centers, • Sets up / change over jobs on CNC mills , changes tooling , adjusts offsets and calibrate probes to ensure parts are accurate and machine is functioning correctly, • Assist team members with quality related questions / concerns, • Ensures equipment and process are qualified when released to operators, • Communicate status of machine activities to supervision, • Inspect tool holders and machine function and schedule preventative maintenance, • Understand how to troubleshoot from a technical standpoint. Work with machine tool dealer and technical manuals to correct issues their not familiar with, • Provide training regarding basic safety, machine operation, quality., • Instruct on machine fault resolution, • Work with mechanics and do some light mechanical work, • Document machine issues, • Assist in normal production by operating equipment as directed Other Important Responsibilities: • Must be able to operate assigned equipment safely and efficiently, • Have a strong work ethic and the ability to work cooperatively, • Good organizational and communication skills, • Must be able to keep record of time spent and materials used, • Timely Corrective Action response and resolution to relevant situations, • Engage and support companywide Safety and Cleanliness Programs, • Other miscellaneous duties as assigned. Qualifications: • High School or GED Diploma required, • Minimum 2 years of CNC Programming experience, • Minimum 3 years or "VERY" strong HAAS experience including skilled operation of CNC Mills, • Experience in G & M Code, • Experience in programming and setting up 3 & 4 axis Vertical and Horizontal Machining Centers, • Experience with CadCam software and Autocad or similar a plus, • Good working knowledge and understanding of tooling and proper usage, as well as speed & feed calculation. Materials Aluminum, Stainless, Plastics, and Steel., • Task oriented, ability to prioritize work load, • Enthusiastic attitude, cooperative team player, adaptable to new or changing circumstances, professional demeanor, self-motivated, creative and innovative Physical requirements and work environment: • Must be able to lift 50 lbs, • Must be able to sustain physical work for 8+ hours per day including the following:, • Standing for 8+ hours per day, • Reaching and pulling, • Sight, • Walking through shop, • Bending, climbing and crouching., • Shop noise levels are such that protective ear-coverings are recommended, • Medical, Dental & Vision Coverage, • Flexible Spending Accounts (FSA), • Company-Paid Life and Disability Insurance, • 401(k) with Company Match, • Paid Time Off & Paid Holidays, • Annual Bonus Opportunities, • Employee Assistance Program (EAP) Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to . CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Job Description The HORIBA Group of worldwide companies provides an extensive array of instruments and systems for applications ranging from automotive R&D, process and environmental monitoring, in-vitro medical diagnostics, semiconductor manufacturing and metrology, to a broad range of scientific R&D and QC measurements. Proven quality and trustworthy performance have established widespread confidence in the HORIBA Brand. Inspired by our unique motto, "JOY and FUN," we focus on social responsibilities by building state-of-the-art products for scientific advancement, especially for protecting health, safety, and the environment. "HORIBARIANs," the HORIBA employees all over the world, look forward to working with additional creative and entrepreneurial self-starters. To learn more about our unique culture, visit our culture page. Culture - HORIBA Essential Job Functions: SUMMARY: Working on in-house repairs and support the testing and QC of service accessory orders, the Electronics Technician aligns, calibrates, tests, troubleshoots, modifies and repairs customer instrumentation. By following the procedures that define the way our products must operate, the Electronics Technician minimizes the performance aspects of our products so that they perform the way the customer needs them to perform to achieve research and production objectives, which are the reason the purchaser has purchased the product in the first place. Skills/Experience Required: • Hands-on, advanced troubleshooting skills, • Mechanically inclined, quick learner, • Previous customer service repair support experience, • Associate's degree {A.S.) or equivalent in science or technology from a two-year college or technical school, • 2-4 years of related experience and/or training or equivalent combination of education and experience, • Knowledge of computers, electronics and optics, • Ability to read and interpret documents professionally, • Ability to collect and analyze data, • Basic electronics circuit theory comprehension, • Ability to interpret basic electronic schematics, • Ability to solder and desolder components using proper tools, • Ability to work with small components without damage to adjacent components and without cold solder joints, • Ability to use hand tools and equipment such as multimeters and snap clamps, • Knowledge of hazards, health and safety, • May handle customer phone calls and support, • Write procedures as needed, • Work on ways to improve instrument quality or reliability where possible through engineering change requests Compensation Package: HORIBA Instruments offers a competitive compensation package that includes a 401(k) plan with match; employee group dental, vision, life, and disability (short and long-term) paid for by the company; medical insurance, family dental and vision insurance, and supplemental life insurance available with reasonable employee contributions; employee assistance program; paid holidays, vacation, and sick time; flexible spending accounts; and educational reimbursement and commuter benefit programs. If you are an individual with a disability and need an accommodation during the application/hiring process, please call (732)494-8660 for assistance. HORIBA will provide reasonable accommodations, upon request, to support individuals with disabilities to be able to participate in the hiring process. HORI BA is committed to making our workplace accessible for individuals with disabilities. EEO/Affirmative Action/Veteran Status/Disabilities.

Job Description The Product Technician 3 is responsible for operating production machinery in accordance with established procedures and guidelines to produce products based on the specifications outline in the Job Book The Product Technician 3 is expected to: · Produce products that meet MICRO’s quality standards and customer specifications consistently Machine Operation 60% · Operates a variety of production equipment and machinery. · Manufacture, test, inspect, package, and label products according to defined procedures and instructions as appropriate. · Uses computer-controlled equipment to select, position and secure automatic or semi-automatic machines. · Verifies material, lubricants, solvents and packaging material are correct. · Produces products that conform to all of the requirements outlined in the job book · Monitors production process during the production run · Performs maintenance activities where applicable · Stops production when product is not in conformance and follows the nonconformance procedure. Product Inspection and Nonconformance Process 40% · Reads and interprets prints located in the job book. Verifies dimensions of finished product visually and/or by using inspection equipment per customer specifications. · Keeps inspection data based on the requirements of the job book. · Completes all necessary documentation. · Uses SPC to verify conformance of products · Identifies production or quality issues and reports it to the appropriate group. This position has no talent management responsibilities. EDUCATION AND EXPERIENCE · High school diploma or general education degree (GED) is preferred. · 0-2 years of experience in a manufacturing environment or equivalent combination of education and experience is preferred LICENSE AND CERTIFICATION · None TECHNICAL SKILLS · SPC · Blueprint OTHER SKILLS · WIP tracking · Multitasking · Personal Accountability · Problem solving · Spatial dexterity · Manual dexterity · Attention to detail · Organizational skills · Basic computer skills While performing the duties of this Job, the employee is regularly required to stand; walk; sit; use hands to touch, handle, or feel; reach with hands and arms; and talk and hear. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must lift, push, pull, carry and/or move up to 10 pounds constantly, between 10 and 25 pounds frequently, and between 25 and 50 pounds occasionally. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing this Job, the employee is regularly required to demonstrate manual and spatial dexterity sufficient to operate machinery for precision work. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts and vibration. The employee is frequently exposed to risk of electrical shock and odors, dusts, mists, fumes and/or airborne particles. The employee is occasionally exposed to wet and/or humid conditions. The noise level in the work environment varies from moderate to loud, based on the department/work area.

Job DescriptionCompany Description Lawn Specialties is a family owned and operated business with treating all employees like family at the core of our values. Our employees provide innovative, safe, and high-quality infrastructure/maintenance contracting services to State DOTs, railroads, and other commercial/residential customers across the entire United States. Employees receive generous compensation packages, employee engagement events & career development programs, just to name a few of the perks of being part of the DCS family! To provide quality service, we need top-of-the-line employees. That is why we offer great compensation, awesome benefits, and a work environment worth bragging about! Job Description Lawn Specialties is seeking a motivated and dependable Lawn Technician who brings a positive attitude and a strong commitment to customer service. In this role, technicians work with both residential and commercial clients to provide timely lawn and tree care services. Responsibilities include applying treatments, addressing customer questions and concerns through service calls and other communication channels, and supporting company growth by recommending and upselling services to new and existing customers. Lawn Technicians are also expected to clearly communicate product and service information, troubleshoot technical issues as they arise, and maintain accurate daily documentation. This includes completing production reports, new sales forms, customer invoices, and vehicle inspection reports. Key Duties and Responsibilities • Measure and properly mix lawn care products according to specifications, • Apply fertilizers, weed control, and insect control treatments, • Safely operate lawn care equipment and machinery, • Complete customer invoices and maintain organized application records, • Perform lawn evaluations, including identifying grass types and weeds, • Respond to customer inquiries with professionalism, enthusiasm, and a willingness to learnQualifications EDUCATION: A High School Diploma or equivalent is required. EXPERIENCE: • Valid driver’s license with at least five years of clean driving experience., • Ability to safely operate trucks up to one ton (CDL not required)., • Pesticide license preferred but not required., • Strong customer service skills with the ability to identify and support sales opportunities., • Ability to lift and carry 50–100 pounds as required., • Availability to work Monday through Friday, with occasional weekend work as needed., • Excellent attention to detail and a strong willingness to learn., • Strong communication, organizational, and interpersonal skills. Additional Information Benefit Highlights: • Challenging and rewarding work environment, • Competitive Compensation, • Excellent Medical, Dental, Vision and Prescription Drug Plan, • 401(K), • Generous Paid Time Off Come be a part of the DeAngelo family, today! DCS is an equal opportunity employer and complies with all hiring and employment regulations. In the event an ADA accommodation is needed, DCS is happy to help all employees achieve gainful employment in an atmosphere where they are appreciated and respected. DCS offers subcontracting services to government agencies as such, candidates may be subject to pre-employment screenings such as criminal background checks, pre-employment, post-accident & reasonable impairment drug screenings, motor vehicle record checks, etc. as such, DCS complies with all federal and state regulatory guidelines including the FCRA.

Laboratory Technician Contract for 12 Months with potential to extend Monday - Thursday, 8:00AM - 4:00PM EST Onsite in Piscataway, NJ The individual will be working in an industry lab setting, namely, Oral Care Product Development. The candidate’s main responsibility will be the production of lab batches for toothpaste on a daily basis, the running of in-vitro assays, the creation of stability protocols in LabNet and the organization and tracking of samples for testing and aging analysis. The candidate will support other lab personnel with the functional testing of products as required per protocols. Additionally, proper documentation of work and results are very important.

About USS: United Site Services is the industry leader in comprehensive site services, committed to creating partnerships that help enable our customers’ project and event success. Our deep industry expertise, excellence in process management, and dedication to corporate responsibility are pillars of our value proposition; each supported by tangible, best-practice programs. Our success is fueled by the dedication and collaboration of our diverse team, which includes field technicians, customer care representatives, sales professionals, and functional experts. Each member of our team plays a vital role in ensuring a seamless and reliable experience for our customers. By joining United Site Services, you will be part of an organization that values continuous improvement, teamwork, and excellence in every aspect of our business. Overview: Technician-Fence (Fence Technicians) loves to drive a truck filled with fencing materials to designated work sites. Our customers expect fast and timely service, so it's important you are customer focused. You will also install the fence into the ground using a "kittyhawk." Responsibilities: • Conduct daily inspection of all tools assigned to the truck to ensure safety and proper working condition, • Check loads to ensure that truck has all material (fence panels, poles, etc.) and tools needed to complete service tickets, • Conduct daily pre-shift vehicle inspection & report deficiencies to shop immediately, • Operate fence vehicle to and from pre-designated work sites, • Unload all fence materials and install fence panels, with appropriate tools, at work site in accordance with pre-determined specifications. Locate, measure and mark location for placement of panels & installation, • Coordinate the workload and the efforts of the Fence Helper. Examine and inspect work progress, equipment & work site to ensure that specifications are met, • Meet with site superintendent (or other designated representative) to confirm work order. Maintain telephone or radio contact with supervisor to receive additional instructions, changes to work locations, etc, • Record information such as personnel, production and operational data on specified forms and submit to Fence Manager at end of each shift, • Train Fence Helper on proper installation procedures, safety protocol, etc, • Perform other duties as assigned Qualifications:, • Minimum two years of commercial driving experience., • Valid Commercial Driver's license (CDL Class C)., • Excellent time management, customer service and communication skills., • Strong problem-solving and decision-making skills., • Ability to meet deadlines. Physical Requirements:, • Sit while driving and stand while servicing products, • Use hands and fingers to handle, control or feel objects tools or controls, • Repeat the same movements, • See details of objects that are less than a few feet away and also at greater distance, • Speak clearly so customers can understand, • Understand the speech of another person, • Hear sounds and recognize the difference between them, • Walk up to 30 minutes at a time without exertion, • Enter and exit equipment by stepping and kneeling, • Lift up to 40lbs from your waist to your shoulders, • Lift 30lbs from the floor to your head, • Crouch and squat, • Holiday & Paid Time Off (pro-rated for Part-Time employees), • Medical/Pharmacy, • Dental, • Vision, • Employer-Paid Short-Term Disability, • Employer-Paid Employee Basic Life & Accidental Death and Dismemberment, • Voluntary Employee Life & Accidental Death and Dismemberment, • Voluntary Spousal Life, • Voluntary Dependent Life, • Hospital Indemnity, Accident and Critical Illness, • Commuter/Transit Account, • Healthcare Flexible Spending Account, • Dependent Care Flexible Spending Account, • Health Savings Account, • 401(k) with employer match, • Employer-Paid Employee Assistance Program (EAP), • Employee Discounts Salary Range: $20.42 – $27.57 / hour Pay Transparency Statement: At United Site Services, our salary ranges reflect the minimum and maximum base pay for the posted position applicable to all locations across the US. Within the posted salary range, individual pay is determined by the geographic location, job related skills, experience, education, and certifications. Our total compensation package includes base pay plus a comprehensive benefits program. EEO Statement: Some positions may require secure site access and/or domestic air travel. All candidates for positions which require secure site access and/or domestic air travel must possess an acceptable form of identification to comply with state and federal regulations, such as REAL ID-compliant driver’s license or state ID, or U.S. passport. This statement is not intended to require documentation beyond what is acceptable under the federal I-9 form process administered by the U.S. Citizenship and Immigration Services (USCIS); and should not be construed as creating additional employment eligibility verification requirements. United Site Services is an equal opportunity employer. In accordance with applicable law, we prohibit discrimination against any applicant or employee based on any legally-recognized basis, including, but not limited to: race, color, religion, sex (including pregnancy, lactation, childbirth or related medical conditions), sexual orientation , gender identity , age (40 and over), national origin or ancestry, citizenship status, physical or mental disability, genetic information (including testing and characteristics), veteran status, uniformed servicemember status or any other status protected by federal, state or local law. Our commitment to equal opportunity employment applies to all persons involved in our operations and prohibits unlawful discrimination by any employee, including supervisors and co-workers.

Job Description Maintenance Technician – Manufacturing Location: New Brunswick, NJ Pay: $35.00 per hour Type: Full-Time, Non-Exempt Shifts Available: Multiple (day, evening, and overnight) Overview We’re seeking experienced, hands-on Maintenance Technicians to support production reliability, equipment repair, and preventive maintenance in a high-volume food manufacturing environment. Ideal candidates are mechanically and electrically skilled, detail-oriented, and thrive in fast-paced operations where uptime is critical. Key Responsibilities * Perform preventive maintenance and repairs on production and packaging equipment. * Troubleshoot mechanical, electrical, and PLC-related issues to minimize downtime. * Read and interpret blueprints, wiring diagrams, and equipment manuals. * Maintain accurate maintenance records through a CMMS system. * Follow all safety, GMP, and company policies while maintaining a clean and safe workspace. * Collaborate with operations and engineering teams to identify and implement process improvements. * Support installation, calibration, and testing of new machinery and components. * Participate in shift hand-offs and team meetings to ensure communication and continuity. Qualifications * Minimum 5 years of experience in industrial maintenance or manufacturing equipment repair. * Solid understanding of AC/DC motors, sensors, drives, and control systems. * Working knowledge of PLC troubleshooting (Allen-Bradley preferred). * Ability to use precision measurement tools (calipers, micrometers, etc.). * Familiarity with CMMS software and preventive maintenance programs. * Excellent communication and problem-solving skills. * Flexibility to work different shifts and occasional weekends or overtime as needed. Benefits * $35.00 per hour base pay * Annual performance bonus potential * Comprehensive medical, dental, and vision insurance * 401(k) with company match * Paid time off and holidays * Growth and advancement opportunities in a stable, team-oriented environment Powered by JazzHR GnuiYp1MQv

Job DescriptionDescription: We are searching for Industrial Maintenance Technician to join our Maintenance Team! Our Associates enjoy full-time hours, job stability and job growth. We take care of you, as you help us take care of thousands of medical patients and providers. What You'll Do: Ensures operation of machinery and mechanical equipment by completing preventive maintenance requirements on motors, pneumatic systems, conveyor systems, and production machines; following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications; troubleshooting malfunctions. Electrical & Controls: Troubleshoot, repair, and maintain industrial electrical systems up to and including 480 VAC, including motors, VFDs, motor starters, relays, sensors, and control panels. Diagnose control circuit failures using schematics and electrical prints. Perform advanced troubleshooting on PLC-controlled equipment, including I/O diagnostics and basic logic review (no programming required) Verify proper operation of safety circuits, interlocks, E-stops, and guarding systems in accordance with OSHA and NFPA standards. Mechanical Systems: Perform advanced mechanical troubleshooting and repair on conveyors, gearboxes, bearings, shafts, couplings, pumps, dryers, presses, and other industrial production equipment. Conduct precision alignment, tensioning, and adjustment of mechanical components to manufacturer specifications. Fabricate or modify components as required to support repairs and equipment improvements. Steam & Boiler Systems: Troubleshoot and maintain steam distribution systems, including steam traps, valves, condensate return systems, heat exchangers, and piping. Support safe operation of boiler and thermal systems in compliance with applicable codes and permits. Identify steam-related inefficiencies and failures that impact production, safety, or energy usage. Plumbing, Hydraulics & Pneumatics: Diagnose and repair industrial plumbing systems, including water, wastewater, chemical dosing, and process piping. Troubleshoot and maintain hydraulic and pneumatic systems, including pumps, cylinders, valves, regulators, and compressors. Identify pressure, flow, or contamination issues affecting equipment performance. Welding & Fabrication: Perform MIG/TIG/Stick welding to support equipment repair and improvements. Maintenance Systems & Documentation • Execute preventive and corrective maintenance tasks using the CMMS, including accurate work order documentation., • Maintain equipment history, parts usage, and maintenance records to support data-driven decision-making., • In-depth knowledge of industrial maintenance practices, reliability principles, and preventive maintenance strategies., • Working knowledge of industrial equipment, boilers, wastewater systems, and industrial utilities. High School Diploma or GED 3 or more years mechanical maintenance experience in an industrial manufacturing environment. Demonstrated knowledge of mechanical equipment, troubleshooting & repair, and safe work practices. Experience working in production environment. Be able to read building and electrical schematics. Basic math skills along with excellent organizational and decision-making skills. Must be able to work independently and efficiently in an often fast-paced environment. Why Work with Us? Competitive Starting Wage Comprehensive Benefits including: Medical, Dental, and Vision Insurance 401k with Company Match Paid Time Off & Paid Holidays Quarterly Customer Service Bonus Program Company Paid Life Insurance Employee Assistance Program Nixon Medical is proud to partner with WorkStep, a cutting-edge text messaging-based associate feedback platform, to drive an amazing culture of associate engagement and continuous improvement. We believe to grow and create opportunities that enrich each other’s lives, opportunities must be available to all. Our commitment to having a diverse, equitable, and inclusive workforce will strengthen our progress to continue offering long-term career opportunities while providing best-in-class solutions for our customers. Nixon Medical is an equal opportunity employer

Job Description Maintenance Technician – Manufacturing Location: New Brunswick, NJ Pay: $35.00 per hour Type: Full-Time, Non-Exempt Shifts Available: Multiple (day, evening, and overnight) Overview We’re seeking experienced, hands-on Maintenance Technicians to support production reliability, equipment repair, and preventive maintenance in a high-volume food manufacturing environment. Ideal candidates are mechanically and electrically skilled, detail-oriented, and thrive in fast-paced operations where uptime is critical. Key Responsibilities • Perform preventive maintenance and repairs on production and packaging equipment., • Troubleshoot mechanical, electrical, and PLC-related issues to minimize downtime., • Read and interpret blueprints, wiring diagrams, and equipment manuals., • Maintain accurate maintenance records through a CMMS system., • Follow all safety, GMP, and company policies while maintaining a clean and safe workspace., • Collaborate with operations and engineering teams to identify and implement process improvements., • Support installation, calibration, and testing of new machinery and components., • Participate in shift hand-offs and team meetings to ensure communication and continuity. Qualifications • Minimum 5 years of experience in industrial maintenance or manufacturing equipment repair., • Solid understanding of AC/DC motors, sensors, drives, and control systems., • Working knowledge of PLC troubleshooting (Allen-Bradley preferred)., • Ability to use precision measurement tools (calipers, micrometers, etc.)., • Familiarity with CMMS software and preventive maintenance programs., • Excellent communication and problem-solving skills., • Flexibility to work different shifts and occasional weekends or overtime as needed. Benefits • $35.00 per hour base pay, • Annual performance bonus potential, • Comprehensive medical, dental, and vision insurance, • 401(k) with company match, • Paid time off and holidays, • Growth and advancement opportunities in a stable, team-oriented environment

Job Description About CompoSecure Founded in 2000, CompoSecure is a technology partner to market leaders, fintechs and consumers, enabling trust for millions of people around the globe. The company combines elegance, simplicity, and security to deliver exceptional experiences and peace of mind in the physical and digital world. CompoSecure's innovative payment card technology and metal cards with Arculus security and authentication capabilities deliver unique, premium branded experiences, enable people to access and use their financial and digital assets, and ensure trust at the point of a transaction. For more information, please visit and . Position Overview: This position is responsible for performing a wide range of semi-skilled and skilled maintenance, repair, and restoration work across manufacturing, office, and support areas. This role supports the installation and relocation of production and office equipment, monitors and performs minor upkeep of major utility systems, and ensures general building, grounds, and facility operations are maintained in a safe and functional condition. Key systems supported include air compressors, furnaces, chillers, vacuum pumps, HVAC equipment, plumbing, and general building infrastructure. This position plays a critical role in maintaining production readiness and overall facility reliability. Key Responsibilities: • Support daily operations of manufacturing plants, buildings, and office areas under the direction of the Facilities Director and Facilities Supervisor, • Install, relocate, and remove production equipment using rigging, forklifts, pallet jacks, equipment skates, and similar tools, • Connect equipment to facility utilities including water, coolant, compressed air, vacuum, and wastewater drainage, • Maintain and repair building systems and components including doors, turnstiles, plumbing fixtures, leaks, locks, stairs, racking, guardrails, monitors/TVs, wastewater pumps, and related infrastructure, • Relocate office furniture and equipment; install or remove cubicles, signage, shelving, worktables, and filing cabinets as needed, • Serve as the first line of response to facility and production support issues prior to engaging external contractors for major system repairs (e.g., air compressors, vacuum pumps, furnaces, chillers, RODI systems, nitrogen systems), • Technician is not expected to perform major equipment repairs but must understand system operation and provide temporary solutions and guidance, • Conduct daily facility and property inspections to identify safety concerns and take immediate corrective action, • Perform a broad range of skilled maintenance tasks over extended periods, • Complete work in compliance with OSHA regulations and safety practices, including lockout/tagout procedures, • Read and interpret sketches, diagrams, and blueprints, • Fill in for janitor/custodial functions, when necessary., • Source parts for repairs and regular maintenance., • Coordinate with external service providers for equipment and facilities repair, when required., • Timely Corrective Action response and resolution to relevant situations., • Engage and support companywide Safety and Cleanliness Programs., • As part of the EMS- Environment Management System, will meet compliance obligations and accountability by contributing but not limited to the company's recycling guidelines, proper waste and other environmental performance practices., • A minimum of 7 years of Maintenance Experience. Including methods, practices and equipment used in facilities management and activities, including a variety of building trades work., • High School Graduate required. College or Trade School preferred., • Electrical, Mechanical, Welding, Electro-Mechanical and equipment training, a plus., • Knowledge of tools and equipment used in building maintenance, reconstruction and repair work., • Experience with a virtual work order and spare parts management system preferred., • Strong analytical skills., • Task oriented excellent organizational skills, ability to prioritize work load., • Versatile "jack-of-all-trades" maintenance skill set, • Plumbing experience required, primarily PVC socket weld and occasional threaded pipe, • HVAC experience strongly preferred, • General mechanical aptitude, • General construction knowledge (e.g., wall repair, painting), • Must be able to lift 70 lbs, • Must be able to sustain physical work for 8+ hours on a standard 3 shift operation or 12+ hours per day on 24/7 operation. Also includes the following:, • Standing, • Reaching and pulling, • Sight, • Walking through shop, • Bending, climbing and crouching., • Office environment is of moderate noise level., • Shop noise levels are such that protective ear-coverings are recommended., • Sometimes subject to external weather conditions., • Short notice, overtime demand according to equipment or facility breakdowns., • Repair work on heavy equipment often in a seated or standing position., • Grease, oil, water exposure., • Majority of facilities are air-conditioned year-round At CompoSecure, we believe in supporting our employees with a comprehensive benefits package that promotes health, financial well-being, and work-life balance. Our full-time team members enjoy access to: • Medical, Dental & Vision Coverage, • Flexible Spending Accounts (FSA), • Company-Paid Life and Disability Insurance, • 401(k) with Company Match, • Paid Time Off & Paid Holidays, • Annual Bonus Opportunities, • Employee Assistance Program (EAP), • Career Advancement Opportunities

Job DescriptionJob Type: Full-time Restoration Technician About the Company SERVPRO of East Brunswick/Princeton Meadows is a trusted leader in the restoration industry, providing 24/7 emergency services for water damage, fire damage, mold remediation, and more. Locally owned and operated, we proudly serve our community with professionalism, speed, and compassion helping homes and businesses recover from unexpected disasters. As part of the nationally recognized SERVPRO network, we combine the strength of a national brand with the care and personal attention of a local business. Our team is highly trained, certified, and committed to delivering top-quality service using the latest equipment and industry best practices. If you're looking to build a rewarding career in a fast-paced environment where no two days are the same, join our team and help make a difference in peoples lives when they need it most. Benefits: • 401(k) matching, • Health insurance, • Paid time off, • Overtime Pay, • Bonus Pay, • Competitive compensation, • Paid training, • Career progression, • Personal and professional developmentOverall Responsibilities:, • Perform and evaluate restoration activities including but not limited to, water, sewer, fire & mold cleanup, set-up of specialty equipment and demolition., • Load, inventory, and maintain work vehicles with tools, equipment, and all necessary supplies for each project., • Effectively communicate safety hazards, job site findings, equipment and tool requirements for the worksite with supervisors., • Learn and develop restoration skills to elevate the SERVPRO Brand and grow within the company., • Prepare rooms/areas for work activities. Set up staging area and equipment for each project., • Communicate with management and other technicians to maintain efficient production processes., • Perform production processes as directed, including other tasks/duties as required by employer., • Perform end-of-day/end-of-job cleanup and breakdown. Leave jobsite with a clean and orderly appearance, • Adhere to safety and risk management guidelines at all times., • Other tasks/duties as required by employer. Position Requirements, • Effective written and oral communication, • Valid drivers license, • High school diploma/GED, • Because we provide 24-hour emergency services, must be willing to be on call when needed., • Some night and weekend work is required. Flexibility is a necessity.Skills/Physical Demands/Competencies, • Ability to lift a minimum of 50 pounds regularly, occasionally up to 100 pounds with assistance, • Ability to climb ladders, work at ceiling heights, work in tight spaces (e.g., crawl spaces, attics), • Ability to repetitively push/pull/lift/carry objects, • Ability to work with/around cleaning agents

The Lead Maintenance Technician performs corrective and preventative maintenance, installation, repair and service of all mechanical and electrical systems. The Lead Maintenance Technician performs continuous improvements initiatives, troubleshooting, and mentoring/lead junior technicians. The lead Technician helps foster a culture of safety, accountability, and operational excellence across all plant maintenance activities. \n Essential Functions \n\n • Follow, without exception, all safety policies /safety rules, and procedures. \n, • Follow all work instructions, both written and oral.\n, • Required to keep shop and work areas in a safe and tidy condition, following 6S standards.\n, • Required to perform all facility maintenance.\n, • Ability to perform work in a mature and professional manner, demonstrate personal responsibility, and perform all assigned duties.\n, • Ability to trouble shoot/solve mechanical breakdowns in areas consisting of old and new equipment, while communicating with production and maintenance manager.\n, • Perform mechanical repairs and replace parts on machines such as bearings, valves, filters, gauges, switches, etc.\n, • Perform routine preventive maintenance on all production equipment and machinery, such as a resistance welder, seamer, automated paint booth, conveyors, curing ovens, etc.\n, • Assist in machine changeovers and start-up of machines for production needs when required.\n, • To identify improvements, advise and correct potential problems.\n, • Assist in maintaining safety; reduce downtime; decrease scrap; improve quality production; and improve plant efficiency.\n, • Perform and oversee electrical troubleshooting (AC/DC motors, controls panels motor drivers, etc.)\n, • Ability to use ladders, scissor lift, forklift, milling machine, lathes, drill presses, welder and hand tools to complete repairs.\n, • Ability to use precision measuring devices including amp meters, electric meters, hydraulic gauges, Etc.\n, • Lead/coach and mentor maintenance technicians fostering skilled development and productivity.\n, • Assign daily tasks and prioritize maintenance work orders in alignment with production needs.\n, • Teach expertise of equipment in diagnostics and trouble shoot while providing guidance and training for all maintenance techs\n, • Recommend process and equipment improvements and enhance safety, efficiency, and product quality.\n, • Collaborate with management and other departments on cross functional initiatives.\n, • Industrial Maintenance Millwright Certificate or Qualified Mechanic.\n, • 10 years of direct hands-on experience with production equipment maintenance and repair with 3-5 of those years in a lead role.\n, • At least 3 years of stable work history\n, • Electrical knowledge of 3 phase and DC systems.\n, • Knowledge of industrial electrical, control, and instrumentation systems. Examples include control relay logic; voltage control schemes; photo-eyes; distance and pressure transducers; etc.\n, • Ability to operate a forklift safely to eliminate personal injury and material damage.\n, • Ability to lift 55 lbs. overhead, climb, bend, stoop, push and pull.\n, • Must possess excellent communication skills, professional maturity, and a proactive mindset.\n, • Requires good eye/hand/foot coordination.\n, • Good visual acuity – cannot be colorblind.\n, • Must be able to stand for extended periods.\n, • Must be able to work in cold, heat and dusty environment; it includes occasional work outside in the elements.\n, • Ability to safely operate all equipment and tools.\n Mauser Packaging Solutions is that company. Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team. At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers better—and help them be better stewards of the environment. Whether you’re a seasoned professional—or just beginning your career—there’s a place where you can help make a difference at Mauser Packaging Solutions. Join us!\n\n \n\n\n Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. \n Benefits: Mauser Packaging Solutions offers a comprehensive benefits package, including medical, dental, paid time off, and other competitive benefits.

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit . Your Impact The Advanced Solar Field Service Technician (Operations and Maintenance) in the PEARCE Renewables Solar Operations and Maintenance Division performs tasks involving physical labor at solar energy sites near New Brunswick, New Jersey. The Solar Field Service Technician is responsible for the operation and maintenance (O&M) of solar power plants in accordance with established preventative and corrective maintenance standards while always maintaining safety and professionalism. These are local sites-candidates should reside within 50 miles of the New Brunswick, New Jersey areas. Core Responsibilities • Conduct preventative and corrective maintenance of Solar Utility and Sub-Station equipment., • Responsible for documentation including, but not limited to, work orders, time logs, inventory control, and emergency information schedules., • Provide a working knowledge of troubleshooting electrical components with help and use of digital multi-meters, meggers, amp clamps, and similar equipment., • Testing/troubleshooting installed solar equipment and ensuring proper working order., • Must have a strong safety background with experience in Lock Out Tag Out (LOTO) and Job Hazard Analysis (JHA)., • Able work in a solo as well as a group environment. Core Experience • 2+ years' experience in Commercial/Industrial operations and maintenance (O&M) on solar power plants is preferred., • Preventative Maintenance experience on Solar Utility equipment is preferred., • Candidates should possess strong mechanical and electrical experience with troubleshooting and installation skills., • Specific solar experience with Inverters, Tracker Systems, or Sub-Stations Equipment (TMEIC/SMA/Sungrow/Nextracker/ATI, etc.) is preferred., • Takes initiative to escalate issues at site., • Ability to train, mentor, and develop laborers into Apprentices. At Pearce safety is our number one concern. Candidates must be able to comply with OSHA Standards. • Must live within approximately 50 miles of the New Brunswick, New Jersey areas., • Be exposed to ambient temperatures while working outdoors., • Lift and move equipment as needed (up to 50 pounds)., • Employment may require working on weekends and holidays, including an "on call" service availability via telephone/text message. At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range$30—$42 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at !

With our most recent expansion to a new facility, we are seeking a talented Maintenance Mechanic/Technician to secure uninterrupted production processes and provide technical support to the production staff. Fix basic breakages such as walls, leaking pipes, connectors, bearings, lights and other mec

Job Description We're looking for Auto Painters with a minimum of 3 years of professional automotive painting experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As a Mid-Level Painter, you'll be expected to match/mix paint color and use water-based paint to paint the vehicle inside our paint booths. At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Pay Range: $23-$30/hr. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment Schedule: We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started Join the Carvana team by applying on this page, or call one of our recruiters by phone at (888) 690-7853, Monday through Friday, between 6 AM and 4 PM PT (9AM to 7PM ET). Not a match for this role? We have a variety of paint roles available, depending on your experience - look below to see other roles available to help us get our low-mileage, late-model cars ready for our customers: • Paint Prepper (min 6 months professional experience): prepare vehicles for cosmetic paintwork, including sanding, masking, taping, bagging, unbagging/tear down, and buffing, • Entry-Level Painter (min 1 year professional experience): prime vehicles and perform final sanding before the vehicle is painted, along with buffing, touch-up, paint mixing, and airbrush., • Mid-Level Painter (min 3 years professional experience): match/mix paint color and use water-based paint to paint the vehicle inside our paint booths, • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold) To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job DescriptionCompany Description Cornerstone Building Brands is a leading manufacturer of exterior building products for residential and low-rise non-residential buildings in North America. Headquartered in Cary, N.C., we serve residential and commercial customers across the new construction and Repair & Remodel (R&R) markets. Our market-leading portfolio of products spans vinyl windows, vinyl siding, stone veneer, metal roofing, metal wall systems and metal accessories. Cornerstone Building Brands’ broad, multi-channel distribution platform and expansive national footprint includes more than 18,800 team members at manufacturing, distribution and office locations throughout North America. Corporate stewardship and Environmental, Social and Governance (ESG) responsibility are embedded in our culture. We are committed to contributing positively to the communities where we live, work and play. For more information, visit us at cornerstonebuildingbrands.com. Job Description JOB DETAILS Base Pay: $23.00 to $28 per hour 3rd Shift: 11pm-7:30am Monday-Friday DUTIES AND RESPONSIBILITIES We are looking for an experienced, hands-on Extrusion Production Team Lead to manage daily production operations, ensure product quality, support team members, and maintain‑ a safe and efficient manufacturing environment. If you thrive in a fast-paced industrial setting and enjoy leading people, this role is for you. Responsibilities • Perform Gemba walk to assess safety, 5S, equipment readiness, labor needs, and line status., • Communicate with outgoing leadership regarding any issues or updates., • Review email for important information for the shift kickoff meeting., • Lead the daily T1 meeting using the WIT Board (Safety, Quality, Operations, Cost, Teamwork, Opportunities)., • Complete quality and process audits: stat-trackers, weight-per-foot checks, and QC measurements using calipers and gauges., • Monitor Andon lights and respond quickly to quality or operational issues., • Approve first-piece parts following standard work guidelines., • Manage operator and technician break/lunch schedules., • Meet with team members to review NCR (non-conforming product) rejections., • Assist in troubleshooting equipment and process issues, coach and train employees., • Print production labels as needed., • Review and adjust production schedule based on changing needs., • Address employee concerns and provide day-to-day support., • Participate in continuous improvement using QPS, 5 Why analysis, and PDCA methodology., • Ensure all employees follow safety rules and company policies., • Conduct full shift handoff with incoming leadership and maintain floor coverage until shift change., • Transfer T1 meeting data to charts, logs, and audit records., • Complete all required shift paperwork and submit it on time.Qualifications, • Experience in extrusion or manufacturing environment is preferred., • 2 - 3 years of leadership experience is a plus., • Ability to use measuring tools (calipers, gauges, etc.)., • Strong communication and coaching skills for a diverse work team, • Problem-solving through critical thinking ability using structured improvement tools (5 Why, PDCA)., • Strong commitment to workplace safety and product quality. Additional Information Site Location: 1 Silverline Dr. North Brunswick Township, NJ 08902 Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. You can also join one of our Employee Resource Groups which help support our commitment to providing a diverse and inclusive work environment. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. All your information will be kept confidential according to EEO guidelines. Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at 281-897-7788 or . If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or . This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. All your information will be kept confidential according to EEO guidelines. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Property Maintenance Service Technician. A successful Property Maintenance Service Technician is expected to visit properties, perform interior and exterior property maintenance. A top-level Lead Service Technician efficiently manages all service calls, providing high-quality service and maintenance

Supervise multiple production/service crews. Production Field Supervisor Roofing (Commercial/Industrial Roofing). CentiMark Corporation, a national leader in the commercial/industrial roofing industry, has an exceptional opportunity for a Field Supervisor (Production) in the NJ/NY (5 Boroughs) area.

The technician will be responsible for assembling, testing, troubleshooting, and maintaining electronic equipment and systems used in the growth, fabrication and testing of optical materials and components in a laboratory production environment. We are seeking a detail-oriented and hands-on Electron

Production Associate (Cylinder Filler).

We are seeking a detail-oriented and hands-on Electronics Technician to join a multi-faceted team supporting production of materials for optical isolators at our Hillsborough, NJ manufacturing facility. The technician will be responsible for assembling, testing, troubleshooting, and maintaining elec

Transfer materials from staging area(s) to the respective production line(s). Remove raw materials / semi-finished goods / finished goods from production lines to their respective staging area and/or warehouse locations in a secure and consolidated manner. Perform multiple inventory storage replenis

The technician will be responsible for assembling, testing, troubleshooting, and maintaining electronic equipment and systems used in the growth, fabrication and testing of optical materials and components in a laboratory production environment. We are seeking a detail-oriented and hands-on Electron

The Maintenance Technician is responsible for keeping our clubs well maintained and safe; making certain all mechanical systems are working properly including routine maintenance and repairs of basic plumbing, lighting, millwork repairs, door hardware and more to provide a positive experience for ou

A top-level Lead Service Technician efficiently manages all service calls, providing high-quality service and maintenance for any job size.

Full-Time Maintenance Technician. The Maintenance Technician ensures senior housing facilities remain safe, functional, and visually appealing.

We are seeking a detail-oriented and hands-on Electronics Technician to join a multi-faceted team supporting production of materials for optical isolators at our Hillsborough, NJ manufacturing facility. The technician will be responsible for assembling, testing, troubleshooting, and maintaining elec

The Lead Production worker is responsible for the smooth operation and coordinates the day to day work for their lines, satisfying production needs, and maintaining consistent levels of service. Packers and Dumpers and provide direction to satisfy production needs. Assist in the cleaning of machines