Qa jobs in Buffalo, New YorkCreate job alerts

Job DescriptionSalary: $22-$26/hr Position Summary: Responsible for the routine oversight of manufacturing operations to ensure compliance with cGMP, Pine Policies and Procedures, and good aseptic technique. Essential Functions: Cleanroom Oversight & Aseptic Compliance • Conduct routine auditing of cleanroom suites, including personnel practices, equipment, environment, and materials., • Perform real-time and retrospective assessments to ensure adherence to cGMP and aseptic techniques., • Observe and verify execution of manufacturing activities as documented in batch records., • Serve as an expert reference for aseptic operators, providing real-time verification of compliance with cGMP and internal procedures., • Audit media fill process runs to verify aseptic technique and regulatory adherence., • Conduct in-process assessments of deviations and non-conformances, including immediate risk evaluation and remediation., • Support cross-departmental investigations by providing information on aseptic and cleanroom processes., • Coach production operators on aseptic behavior, proper gowning, and procedural adherence., • Collaborate with the Training Department to address skill gaps and reinforce best practices., • Ensure components issued to batches are approved and within expiration limits., • Monitor and verify raw materials and in-process components for suitability and integrity, including:, • Container/closure system issues, • Faulty components, • Provide oversight of materials entering cleanrooms to ensure compliance and suitability., • Audit aseptic cleaning activities for consistency and effectiveness., • Support changes dictated by SOP or policy updates to ensure compliance with cGMP and regulatory standards., • Additional tasks inside and outside the cleanroom as required by management. Education and Experience: • Minimum of one year in aseptic manufacturing/cGMP experience, • Knowledge of computer software desired: Microsoft Word, Excel, Sharepoint, Outlook, MasterControl Knowledge, Skills and Abilities: • Strict attention to detail, • Quality-based mindset, • Ability to identify and address deviations from policy and procedure, • Ability to perform risk-based assessment of events, • Strong communication skills and ability to advise operators for corrections when deviations are identified, • Excellent time management and ability to balance multiple responsibilities within the confines of one shift, • Ability to work independently and as a team, • Ability to identify process or procedure flaws and propose pathways to improvement (i.e., problem solving skills)

Job Description The mission of Speechify is to make sure that reading is never a barrier to learning. Over 50 million people use Speechify's text-to-speech products to turn whatever they're reading – PDFs, books, Google Docs, news articles, websites – into audio, so they can read faster, read more, and remember more. Speechify's text-to-speech reading products include its iOS app, Android App, Mac App, Chrome Extension, and Web App. Google recently named Speechify the Chrome Extension of the Year and Apple named Speechify its Design award winner for inclusivity for 2025. Today, nearly 200 people around the globe work on Speechify in a 100% distributed setting – Speechify has no office. These include frontend and backend engineers, AI research scientists, and others from Amazon, Microsoft, and Google, leading PhD programs like Stanford, high growth startups like Stripe, Vercel, Bolt, and many founders of their own companies. Overview With the growth of our Android app, being the most used text-to-speech app in the Play Store, we find the need for a Senior Android Engineer to help us support the new user base as well as work on new and exciting projects to push us forward. This is a key role and ideal for someone who thinks strategically, enjoys fast-paced environments, passionate about making product decisions, and has experience building great user experiences that delight users. We are a flat organization that allows anyone to become a leader by showing excellent technical skills and delivering results consistently and fast. Work ethic, solid communication skills, and obsession with winning are paramount. Our interview process involves several technical interviews and we aim to complete them within 1 week. What You'll Do • Owning major features and working closely with our design team - take ownership of features inside the app and become responsible of delivering high quality features, • Shape the future of our Android team, • Own, maintain and improve reliability metrics for key features, • Participate in discussions across different teams - Product, Design, Engineering, • Review pull requests, and support other teammates, • Handle critical issues or cope with unexpected challenges, • 5+ years of software engineering experience, • Familiarity with Android components, • Experience building or contributing to at least one Android app, • Product design intuition and user empathy, • Drive to push the boundaries of Android UI/UX, • Understanding of the importance of tests and how to approach writing tests, • Self-drive to improve the app and codebase above and beyond what's outlined in the spec, • Rock solid experience with Kotlin, Kotlin Coroutines, Kotlin Flow, Dagger 2, MVVM, Clean Architecture, Background Services, Music Player Service, Android Animations, Jetpack Navigation, JUnit tests, • Excellent communication skills, • User oriented problem solving approach, • Experience building, maintaining, or otherwise contributing to open source projects in Android, • Kotlin, • Kotlin Coroutines, • Kotlin Flow, • Jetpack Navigation, • Dagger 2, • Room, • Custom Views, Canvas & Paint, • Jetpack Compose, • A fast-growing environment where you can help shape the company and product., • An entrepreneurial-minded team that supports risk, intuition, and hustle., • A hands-off management approach so you can focus and do your best work., • An opportunity to make a big impact in a transformative industry., • Competitive salaries, a friendly and laid-back atmosphere, and a commitment to building a great asynchronous culture., • Opportunity to work on a life-changing product that millions of people use., • Build products that directly impact and support people with learning differences like dyslexia, ADD, low vision, concussions, autism, and more. Think you're a good fit for this job? Tell us more about yourself and why you're interested in the role when you apply. And don't forget to include links to your portfolio and LinkedIn. Not looking but know someone who would make a great fit? Refer them! Speechify is committed to a diverse and inclusive workplace. Speechify does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

Job Description SENIOR ENGINEER- TRANSPORTATION Why This Role Matters: As the Sr. Engineer Transportation, you will work independently on projects of large size and high complexity. You will be the subject matter expert and highly technically competent. You will coordinate with multi-disciplined professionals on a wide range of projects for local municipalities, NYSDOT and private sector clients. What You'll Do: • Work with Project Managers to ensure all projects are completed on time and within budget., • Independently coordinates the work of a multi-disciplined team (internal or external) throughout each step of a given project., • Maintain control of project documents, planning design efforts with the project team, • Evaluate, select, and execute standard engineering techniques, procedures and criteria., • Make independent decisions regarding engineering complexities and methodologies., • Prepare maps, plans, reports, and forms as necessary., • Perform QA/QC on other's work, verifying calculations, outcomes, etc. What You Bring: • You earned a BS in Civil Engineering or a related field and have at least eight (8) years of relevant experience – or an equivalent combination of education and experience., • Professional licensure (PE), • You’re proficient in AutoCAD, MicroStation, Civil 3D, Revit, Open Roads and/or other industry best programs, as well as the Microsoft Office Suite, • You have strong interpersonal skills and communicate effectively both verbally and via written correspondence., • You have an aptitude for juggling multiple projects concurrently without losing sight of crucial details., • You can understand and carry out complex technical oral or written instructions. What You'll Be Part Of: As the Sr. Engineer Transportation, you will make significant contributions to the successful execution of our civil engineering and infrastructure projects. What We Offer: CPL cares about your future with us! That’s why we offer the following benefits to you and your family: • Internal Mobility & Career Advancement, • Healthcare for you and your family including spouse coverage: Medical, Dental, Vision & Prescription insurances. Single Plans with 100% paid premium, • Flexible Time Off + 8 Holidays a year, • Retirement Savings Plan - Contribution from CPL to grow your retirement funds., • Tuition Assistance: You may be eligible for continuing education assistance., • Student Loan Assistance Program: CPL will contribute up to a maximum of $100 a month for 5 years ($6,000 total) towards student loan debt., • Licensure Assistance, • Long-Term Disability Insurance Company/team member premium sharing, • Flexible Spending Account $5,000 dependent childcare annually paid 100% by team member pre-taxes., • FREE Life Insurance and AD+D Insurance, • Voluntary Short-Term Disability Insurance What does it look like working here? We believe that building a strong community is about establishing a prevailing sense of fellowship among our team members, friends, and neighbors. • Collaboration – working with others towards the best solution, placing great emphasis on the collective wisdom of our internal teams., • Family – celebrating others’ successes, genuinely caring about the happiness and well-being of our team members and recognizing their own families as extensions of the CPL family., • Fun – not taking oneself too seriously, fully understanding that fun at work is conducive to productivity., • Inspiration – contributing to an uplifting workplace that facilitates growth and success by maintaining a positive, upbeat attitude., • Integrity – doing what is ethically right and providing reliable follow-through on commitments. CPL does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. CPL will not be responsible for any fees arising from the use of resumes submitted by recruiting professionals or agencies that do not have a current placement fee agreement with CPL. All initial communication with recruiting professionals or agencies must go through our Talent Acquisition Team.

Job Description Who We Are: OneBridge Benefits was founded in 2013 with the vision to create better technology to support account-based health plans. Fast forward to today and we continue to be in growth mode, as a premier healthtech company servicing over 250,000 participants with over 2 billion dollars in health accounts. In becoming part of the OneBridge Benefits team you would be joining a group of bright, driven, and creative individuals. We have built an environment that creates opportunities for our people to serve greater roles within specialized teams as we never lose sight of the pursuit of individual passions. We strive to go above and beyond, and embrace open communication, collaboration, and flexibility to achieve our mission. Check out our careers page for more information on the Company and our Core Values: onebridgebenefits.com/careers/ The Person We’re Looking For: Our Quality Assurance Analyst II plays an important role to help ensure our product releases are error-free while meeting the business requirements. This is a results-oriented, metric-driven, technical role focused on ensuring data integrity and functional performance of overall product and integrated customer facing systems. The role’s primary responsibility is to perform risk based functional, performance, and regression software testing within an evolving product development environment that is flexible based on delivery expectations and customer demand. Expected Job Duties: • Test core products and new initiatives, • Collaborate with designers, developers, and stakeholders to understand business logic, • Document specifications and maintain test matrices, • Prepare environments and execute regression and UAT testing, • Validate releases and reconcile results, • Mentor junior QA team members, • Strong problem-solving and risk assessment skills, • Experience with Selenium or similar automation tools, • Proficient in SQL and relational databases, • Excellent communication and organizational skills, • Team-oriented with strong interpersonal skills, • Knowledge of SDLC (Waterfall, Agile, Lean), • Bachelor’s degree in Computer Science, Mathematics, Business, Technology or related discipline or an equivalent combination of related education and work experience, • 2-5 years of experience in QA testing, auditing, or implementation of software solutions On-Site, Buffalo, NY Full-Time; Monday-Friday

Job DescriptionQuality Control Technician (2nd Shift – 3:30 - Midnight) Also known as: Quality Inspector, QC Inspector, QA Technician, Quality Assurance Technician, Manufacturing Quality Technician, Welding Inspector, Metal Fabrication Inspector, Structural Steel Inspector, Production Quality Technician Location: Buffalo, NY Schedule: Monday–Friday, 3:30 PM–12:00 AM GTI Fabrication manufactures custom modular structures, energy storage enclosures, and container-based systems for military, defense, energy, and commercial industries. We specialize in metal fabrication, welding, assembly, structural steel, and modular construction at our Buffalo, NY facility. We are hiring a 2nd Shift Quality Control Technician (Quality Inspector / QC Inspector) to perform inspections on welded, fabricated, and assembled components throughout the manufacturing process. Responsibilities * Perform incoming, in-process, and final inspections on fabricated metal parts, welds, and assemblies * Conduct visual weld inspections and dimensional inspections * Read and interpret blueprints, weld symbols, fabrication drawings, and mechanical prints * Maintain accurate QC reports, inspection logs, and test data * Calibrate and maintain measurement tools and QC equipment * Identify nonconformities (NCRs) and communicate issues to supervisors * Support continuous improvement for quality assurance and welding quality * Work closely with fabrication, welding, assembly, and engineering teams Qualifications * 2–5 years of experience as a Quality Control Technician, Quality Inspector, QC Inspector, Welding Inspector, or Manufacturing Quality Technician * Experience with weld inspection and metal fabrication inspection * Proficiency using calipers, gauges, tape measures, squares, and weld inspection tools * Ability to read and interpret mechanical drawings, fabrication prints, and electrical diagrams * Strong math skills (fractions, decimals, tolerances) * Ability to lift 50 lbs and work in a shop-floor production environment * High school diploma or GED Preferred: * AWS CWI certification or working toward certification * Experience in welding, structural steel, modular manufacturing, or industrial fabrication GrowTech Industries, LLC is an equal opportunity employer.

Job Description Company Overview: GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more. The GTI team consists of more than 50 professionals spanning from fabrication and engineering to government and military specialists. Our combination of expertise allows us to provide top quality solutions and customer service for various industries and missions. The QC Technician is responsible for the inspection and testing of materials and finished products at various stages of the manufacturing process to ensure they comply with all applicable laws, industry codes & standards, as well as Company and Customer specifications/standards. Job Responsibilities: • Develop and maintain inspection reports., • Ensure compliance with federal and state laws, as well as company standards and specifications., • Maintain calibration of quality control equipment., • Perform inspections across all stages of production., • Prepare and maintain test data for review., • Evaluate data and draft reports, noting any relevant deviations from existing standards., • Identify areas for quality control improvement and implement new methods accordingly., • Communicate quality or compliance concerns with urgency., • High school diploma or general education degree (GED) required., • Solid understanding of measuring, inspection and test equipment., • Minimum of 2-5 years of inspection and/or production experience in the metals fabrication industry., • Visual weld and welding inspection experience., • Proficiency with Microsoft Office programs, specifically Excel., • Strong working knowledge of various mathematical concepts including fractions, ratios, and proportions., • Ability to lift and/or move up to 50 pounds occasionally., • Specific vision abilities required include close vision, color vision, and the ability to adjust focus. (minimum required visual acuity - 20/20 corrected or uncorrected), • Demonstrated ability to work independently with minimal supervision., • Excellent organizational skills., • Demonstrated ability to analyze and interpret information., • Associate or bachelor’s Degree in a related field., • AWS Certified Welding Inspector - CWI. GrowTech Industries, LLC is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Job DescriptionDescription: Precast Engineer - Civil/Structural Join Our Team as a Precast Engineer – Shape the Future of Concrete Design & Innovation! Fisher Associates is hiring a full-time Precast Engineer to design and engineer high-quality precast concrete components for a variety of civil and structural engineering projects. You’ll ensure every element meets structural codes, safety standards, and project specs—delivering safe, reliable, and cost-effective solutions. Collaborate with a skilled, supportive team and grow your engineering career in a flexible, impact-driven environment. Apply now and engineer the future with us! About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Execute precast engineering and design tasks efficiently., • Collaborate with project teams to deliver structurally sound, cost-effective, and visually appealing precast concrete designs., • Perform structural analysis and calculations to ensure safety under various loads and conditions., • Select materials and components for precast concrete production that meet strength, durability, and sustainability standards., • Create accurate drawings, plans, and specifications for precast projects aligned with industry design standards., • Support cost estimation for materials., • Support Project Managers and Designers throughout the project lifecycle., • Promote, utilize and support QA/QC processes to guarantee quality deliverables. What We Offer Your Impact Matters, Your Career Thrives. Work on engaging precast engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promise any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Precast Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 0 - 5 years minimum of transportation/structural experience preferred, • Concrete design engineering course or design experience preferred, • EIT or ability to obtain it, • Proficiency in AutoCAD & RISA 3D, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver high quality work and solve problems with critical thinking and sound judgment., • Driven to take ownership of your projects, prioritize your tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth, • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships, • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset

Job DescriptionDescription: Advance Your Career | Shape the Infrastructure of Tomorrow Fisher Associates is seeking a Bridge Design Engineer (Civil/Structural) with 5–10 years of experience to join our growing Bridge and Transportation Engineering team. Whether you're already licensed or on the path to PE certification, you'll gain mentorship and work on meaningful bridge and transportation infrastructure projects that enhance safety, sustainability, and connectivity in the communities we serve. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Support bridge design engineering, including load rating, structural analysis, and foundation design., • Develop design plans, construction documents, specifications, and cost estimates for bridge and transportation structures., • Maintain detailed records of bridge design documents, reports, and budgets., • Support project managers with schedules, documentation, and presentations., • Ensure designs adhere to state and local standards, regulations and safety codes., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • Conduct field inspections and prepare detailed bridge inspection reports and analyze foundation design., • Provide technical support during construction, respond to RFIs and attend site visits. Your Impact Matters, Your Career Thrives. Work on engaging bridge design engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Bridge Design Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5-10 years of transportation experience, structures/bridge design engineering experience preferred, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in MicroStation, STAAD and Bridge Design Software, • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred), • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Demonstrated high-quality work and ability to problem solve applying critical thinking, and sound judgment to challenges, • Driven to take ownership of projects, prioritize tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth, • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships, • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset

Job DescriptionSalary: $20/hr DOE Position Summary: Performs various microbiological sampling and testing in an FDA regulated environment, including personnel and environmental monitoring. Essential Functions: • Perform and review environmental monitoring of ISO5/ISO7/ISO8 manufacturing areas (viable air, viable surface, personnel, and non-viable particulate) as well as inspection for compliance., • Perform and support Media Fill Validations, Engineering Validations and Cleaning Validations., • Accurate/legible completion of records and documents for tests performed, and accurate computer data entry/trending/presentation., • Raw Material/Prefiltration Bioburden/Water sample/Filter integrity testing., • Media check in and growth promotion., • Equipment preparation and autoclaving., • Preparation of microbial ID samples., • Off testing of incubated environmental monitoring media, testing samples, and Media Fills., • Use standard laboratory equipment including but not limited to balance, incubator, autoclave, pipettes, and water bath., • In-process/finished product sample inspection and submission to in-house/third party laboratories., • Stocking/ordering lab supplies., • Assist with revision of microbiology/laboratory procedures and documentation., • Maintenance of close communication and interaction with QC/QA/Production management., • Utilization of programs for daily workflow (e.g. LIMs)., • Utilization of a Quality Management System (QMS) for training and document review/ improvements., • Potential involvement in procedural/policy improvements within the department., • Support microbiology laboratory investigations including NONC/EE/Issue reviews/OOS/OOT/No Tests/CAPA., • Responsible for promoting and maintaining safe and healthy working conditions in his/her assigned work area; instructs and enforces compliance with established safe work practices and procedures; ensures assigned trainees receive appropriate training and information necessary to conduct their activities in a safe and healthy manner., • Responsible for cleaning and upkeep of the laboratory and testing areas., • Support gown assessments as needed., • May perform other duties as qualified/assigned, including but not limited to Sterility , Endotoxin , MET testing, NONC issuance., • Any additional activities as dictated by updates to Standard Operating Procedure and Policies to ensure compliance with cGMP and regulatory bodies. Education and Experience: • A bachelors degree (science related field preferred) or associates degree is preferred., • In lieu of a degree, a high school diploma or equivalent and a minimum of 2 year experience in a regulated environment or Pharmaceuticals may be considered. Knowledge, Skills and Abilities: • Must successfully complete training on aseptic gowning procedures and demonstrate the ability to aseptically gown upon completion., • Accurate/legible completion of records and documents for tests performed, and accurate computer data entry., • Good time management skills, attention to detail, ability to adhere to implemented standard operating procedures/policies, ability to communicate professionally with contract laboratories regarding sample testing, communication with others, and flexibility for new opportunities/tasks., • Works well independently and in a team orientated environment., • Experience in microbiological principles and applications related to microbial ID, validation, or clean room technology., • Experience with standard laboratory equipment including balance, incubator, autoclave, pipettes, or water bath is preferred., • Knowledge of ISO, USP or GMPs standards is a plus., • Knowledge of computer skills (e.g. Windows, Word, Excel, Power Point) Physical Requirements / Working Conditions: • Must have a reliable method of transportation for work travel., • Ability to wear high level full body aseptic gowning with face mask for long periods of time is required., • Ability to stand for long periods of time.

Job DescriptionMission The mission of Speechify is to make sure that reading is never a barrier to learning. Over 50 million people use Speechify's text-to-speech products to turn whatever they're reading – PDFs, books, Google Docs, news articles, websites – into audio, so they can read faster, read more, and remember more. Speechify's text-to-speech reading products include its iOS app, Android App, Mac App, Chrome Extension, and Web App. Google recently named Speechify the Chrome Extension of the Year and Apple named Speechify its 2025 Design Award winner for Inclusivity. Today, nearly 200 people around the globe work on Speechify in a 100% distributed setting – Speechify has no office. These include frontend and backend engineers, AI research scientists, and others from Amazon, Microsoft, and Google, leading PhD programs like Stanford, high growth startups like Stripe, Vercel, Bolt, and many founders of their own companies What You'll Do • Lead the design, architecture, and development of native Windows desktop applications using Windows App SDK, WinUI (or related UI frameworks), C#, XAML, and — when needed — C++., • Define and enforce best-practices for Windows desktop development across the codebase: code architecture, performance, memory usage, responsive UI, cross-version compatibility (Windows 10/11+), and maintainability., • Drive accessibility efforts: integrate and validate support for accessibility APIs (e.g. Microsoft UI Automation or other relevant Windows accessibility frameworks), ensure UI controls, focus management, keyboard navigation, screen-reader support, and usability for users with disabilities., • Collaborate closely with product designers, UX researchers, QA, and other stakeholders to shape feature planning, UI/UX architecture, and long-term roadmap for the Windows platform., • Take ownership of full lifecycle of features: conception → design → implementation → testing → release → maintenance. Ensure quality, reliability, and consistency across releases., • 3+ in Windows desktop application development using Windows App SDK, WinUI (or similar), C#, XAML — and ideally additional experience with native Windows code (C++, Win32/WinRT/COM)., • Deep understanding of Windows application architecture, including interop between managed code (.NET) and native code., • Proven track record of designing, building, and shipping production-quality desktop applications, with an emphasis on reliability, performance, scalability, and maintainability., • Strong experience with accessibility APIs on Windows (e.g. Microsoft UI Automation or similar), and a dedication to building accessible and inclusive software., • Excellent software engineering fundamentals: OOP, design patterns, data structures, algorithms, memory management, multi-threading or asynchronous programming (where relevant)., • Experience leading technical design, mentoring other engineers, conducting code reviews, and making architecture-level decisions., • Strong communication skills; ability to articulate tradeoffs, collaborate with cross-functional teams, and drive consensus., • Experience with writing automated tests for UI — unit tests, integration tests, UI automation tests; familiarity with relevant testing frameworks., • Experience with performance optimization for desktop apps (memory usage, startup time, rendering performance, high-DPI support, responsiveness under load)., • Experience with localization/globalization, right-to-left UI support, internationalization, accessibility for multiple regions., • Familiarity with telemetry, analytics, crash reporting, logging, and error monitoring in desktop applications., • Previous experience in shaping CI/CD workflows, release pipelines, and deployment strategies for desktop applications., • A high-impact role: you will define architecture, shape the future of our Windows product, and directly influence what millions of users see and experience., • A collaborative, flat-structure engineering culture — you are not just a coder, but a builder and a decision-maker., • Opportunities to lead — mentor others, steer technical direction, and grow into broader technical leadership (e.g. Tech Lead, Architect)., • Flexibility, autonomy, and responsibility: you define how to solve problems, own features end-to-end, and contribute to long-term product vision. Think you're a good fit for this job? Tell us more about yourself and why you're interested in the role when you apply. And don't forget to include links to your portfolio and LinkedIn. Not looking but know someone who would make a great fit? Refer them! Speechify is committed to a diverse and inclusive workplace. Speechify does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

Job Description Quality Control Technician (1st Shift – 7:00 AM to 4:00 PM) Also known as: Quality Inspector, QC Inspector, QA Technician, Quality Assurance Technician, Manufacturing Quality Technician, Welding Inspector, Metal Fabrication Inspector, Structural Steel Inspector, Production Quality Technician Location: Buffalo, NY Schedule: Monday–Friday, 7:00 AM – 4:00 PM GTI Fabrication manufactures custom modular structures, energy storage enclosures, and container-based systems for military, defense, energy, and commercial industries. We specialize in metal fabrication, welding, assembly, structural steel, and modular construction at our Buffalo, NY facility. We are hiring a 1st Shift Quality Control Technician (Quality Inspector / QC Inspector) to perform inspections on welded, fabricated, and assembled components throughout the manufacturing process. Responsibilities • Perform incoming, in-process, and final inspections on fabricated metal parts, welds, and modular assemblies, • Conduct visual weld inspections and dimensional checks, • Read and interpret blueprints, weld symbols, fabrication drawings, and mechanical prints, • Maintain accurate QC inspection reports, logs, test data, and documentation, • Calibrate and maintain measurement tools and weld inspection equipment, • Identify nonconformities (NCRs) and communicate findings to supervisors and engineering, • Support continuous improvement activities for quality assurance and welding quality, • 2–5 years of experience as a Quality Control Technician, Quality Inspector, QC Inspector, Welding Inspector, or Manufacturing Quality Technician, • Experience with weld inspection, metal fabrication inspection, and structural steel products, • Proficiency using calipers, gauges, tape measures, squares, weld inspection tools, and measurement devices, • Ability to read and interpret mechanical drawings, fabrication prints, electrical diagrams, and weld symbols, • Strong math skills (fractions, decimals, tolerances), • Ability to lift 50 lbs and work on the production floor, • AWS CWI certification (or actively pursuing) Job Type: Full-time Pay: $20.00 - $28.00 per hour Benefits: • 401(k), • Dental insurance, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off

Job Description Quality Control Technician (2nd Shift – 3:30 - Midnight) Also known as: Quality Inspector, QC Inspector, QA Technician, Quality Assurance Technician, Manufacturing Quality Technician, Welding Inspector, Metal Fabrication Inspector, Structural Steel Inspector, Production Quality Technician Location: Buffalo, NY Schedule: Monday–Friday, 3:30 PM–12:00 AM GTI Fabrication manufactures custom modular structures, energy storage enclosures, and container-based systems for military, defense, energy, and commercial industries. We specialize in metal fabrication, welding, assembly, structural steel, and modular construction at our Buffalo, NY facility. We are hiring a 2nd Shift Quality Control Technician (Quality Inspector / QC Inspector) to perform inspections on welded, fabricated, and assembled components throughout the manufacturing process. Responsibilities • Perform incoming, in-process, and final inspections on fabricated metal parts, welds, and assemblies, • Conduct visual weld inspections and dimensional inspections, • Read and interpret blueprints, weld symbols, fabrication drawings, and mechanical prints, • Maintain accurate QC reports, inspection logs, and test data, • Calibrate and maintain measurement tools and QC equipment, • Identify nonconformities (NCRs) and communicate issues to supervisors, • Support continuous improvement for quality assurance and welding quality, • Work closely with fabrication, welding, assembly, and engineering teams Qualifications • 2–5 years of experience as a Quality Control Technician, Quality Inspector, QC Inspector, Welding Inspector, or Manufacturing Quality Technician, • Experience with weld inspection and metal fabrication inspection, • Proficiency using calipers, gauges, tape measures, squares, and weld inspection tools, • Ability to read and interpret mechanical drawings, fabrication prints, and electrical diagrams, • Strong math skills (fractions, decimals, tolerances), • Ability to lift 50 lbs and work in a shop-floor production environment, • High school diploma or GED Preferred: • AWS CWI certification or working toward certification Job Type: Full-time Pay: $20.00 - $28.00 per hour Benefits: • 401(k), • Dental insurance, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Professional development assistance

Job Description The following responsibilities outline the Christa Construction experience and skill set requirements for an individual holding the position of project superintendent. Key Responsibilities • Jobsite Safety, • Schedule Management, • Daily Reporting, • Jobsite Communication and Coordination, • Entrepreneurial Spirit (Leading job with Authority), • Delivering the project High Level of Quality, • Thorough technical knowledge and understanding of all structural trades (Mandatory)., • Read and comprehend all Contract Documents (Mandatory), • Understands geotechnical, structural and materials testing requirements and procedures., • Thorough knowledge and understanding of crew size required for various levels of productivity in every critical path trade., • Knowledge of soil types and their properties along with the ability to read and comprehend a soils report., • Experience managing the installation of public utilities. Fully understands the timeframe for design, approval, and easement processes., • Knowledge of Sediment and Erosion Control. SWPPP, • Thorough technical knowledge and understanding of site development trades., • Thorough technical knowledge and understanding of all building envelope trades., • Thorough technical knowledge and understanding of all mechanical, electrical, plumbing and fire protection trades., • Thorough technical knowledge and understanding of all finish trade work., • Thorough understanding of plumbing, sprinkler, HVAC, and electrical, fair housing and ADA codes., • Experience managing, coordinating, and obtaining close-in inspections and certificate of occupancy., • Can perform a full submittal review, • Ability to prepare and maintain accurate and professional as-built drawings., • Manages the commissioning of the building. (If not officially commissioned then manage the MEP engineers’ inspections, punch lists, and mechanical startups and schedule and document all owner training.), • Ability to effectively manage and chair weekly subcontractor meetings and take notes to track and update accordingly., • Ability to work closely with the Project Manager to ensure project harmony., • Makes project status presentations at owner meetings., • Completes and maintains accurate and thorough daily reports., • Completes and maintains weekly and incident safety reports., • Manages and maintains an up-to-date, posted, and accurate set of contract documents., • Maintains accurate submittal files on the project., • Performs accurate takeoffs (lumber, trim, doors, etc.), • Is proficient and experienced with FTP sites, F-drive server access, use, and similar computer abilities., • Responsible for coordinating and documenting all required project inspections with the Town, Utilities, Third Party Agencies, insurance representatives, etc., • Thorough understanding of the critical path on a project, sequence of construction, project phasing and various trade durations., • Schedules and manages the project mock-up., • Ability to create and maintain an accurate “three-week look ahead schedule"., • General knowledge of the duration and crew size required to complete various tasks., • Thorough understanding of lead time requirements for materials, selections, and work to be performed by others., • Ability to assist the Project Manager in creating an accurate buyout schedule, and the ability to provide accurate dates for the submittal log to avoid late contract awards or material submittals, • Holds Preconstruction meetings, • Soils handling, placement, and testing, • Civil utilities (storm, sanitary, water) and public utility (Gas, electric, Phone, Cat) installations., • Concrete and Masonry preparation, placement, and testing., • Structural - steel / decking / joists and LG framing installation, details, layout, and structural review, • Wood framing practices, inspections, and structural and dimensional review, • MEP rough in practices, coordination, details, and inspection., • Life safety — Fire walls / Smoke walls / Fire caulking / UL assembly, • Insulation (Thermal and Sound) and Vapor barrier, • All Interior finishes (Drywall — carpet), • Exterior -Waterproofing / weather barrier / moisture barrier / air barrier, • Roofing installation, details, and inspections, • Siding and flashing, installation, details, and inspections., • Holds an OSHA 30 Hour certificate, • Obtains and maintains a first aid/CPR certification, • Consistently sets a good example for others (wears hardhat, boots, safety glasses, etc.), • Demonstrates the ability and willingness to maintain a safe jobsite including disciplining subcontractors as necessary, • Maintains easily accessible, up to date site specific Christa Construction safety manual., • Collects site specific subcontractor safety manuals from all subcontractors prior to them starting work on site., • Equipment, • Oracle Primavera Cloud - Intermediate, • Microsoft Excel - Intermediate, • Procore - Intermediate, • Note Vault - Intermediate Whether you see our Christa sign in front of a housing complex, on a college or hospital campus, or in front of a major athletic stadium, our goal is always the same—to build value for our clients, the facility’s end users and the communities these buildings will serve. That’s been the way since 1982.Christa has completed over $7.0 billion worth of construction throughout New York State. We have experience in the construction of multi-family, senior and student housing, commercial offices, municipality work, medical facilities, warehouses, hotels and restaurants.\r\n\r\nWhether you see our Christa sign in front of a housing complex, on a college or hospital campus, or in front of a major athletic stadium, our goal is always the same—to build value for our clients, the facility’s end users and the communities these buildings will serve. That’s been the way since 1982.

Job DescriptionDescription: A Bridge Engineer– Civil/Structural Full-Time | Hybrid Buffalo, NY Launch Your Career & Structural Engineering | Design the Bridges of Tomorrow Are you a civil or structural engineering graduate or early-career bridge engineer looking to gain hands-on experience in infrastructure design? Fisher Associates is seeking a Bridge Engineer I or II (Civil/Structural) with 0–5 years of experience to join our collaborative Bridge and Transportation team. In this hybrid role you’ll work on impactful bridge design and transportation infrastructure projects that improve safety and mobility in the communities we serve. This is an exciting opportunity to launch your engineering career with mentorship, professional development, and a clear path to PE licensure. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Support bridge design engineering, including load rating, structural analysis, and foundation design., • Develop design plans, construction documents, specifications, and cost estimates for bridge and transportation structures., • Maintain detailed records of bridge design documents, reports, and budgets., • Support project managers with schedules, documentation, and presentations., • Ensure designs adhere to state and local standards, regulations and safety codes., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • Assist with field inspections and prepare detailed bridge inspection reports and analyze foundation design., • Provide technical support during construction, respond to RFIs and attend site visits. Your Impact Matters, Your Career Thrives. Work on engaging bridge design engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Bridge Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 0-5 years of transportation experience, structures/bridge design engineering experience preferred, • EIT preferred or ability to obtain it, • Proficiency in MicroStation, STAAD and Bridge Design Software, • Familiarity with state DOT design standards (NYSDOT or PennDOT) preferred, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to take ownership of projects, prioritize effectively, and thrive in a dynamic, fast-paced environment., • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening., • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset

Job Description Company Overview CME Associates, Inc. (CME) is an engineering technology firm providing comprehensive Construction Materials Evaluation and Technical Support Services. Our experts specialize in geotechnical engineering, construction materials evaluation, special inspections, geological sciences, subsurface exploration, and investigative engineering. Summary Perform material testing services for concrete and asphalt at producer plants in accordance with established testing methods and standards. Responsibilities • Test construction materials such as concrete and asphalt for quality control/quality assurance in material plants, • Read construction documents and specifications and correctly interpret test results, • Record and report test results in a clear, concise manner, • Complete each testing assignment accurately and in accordance with the appropriate standards, • Turn in field data records and completed reports for each project daily, • Communicate regularly with direct supervisor to provide updates on project details, • High School Diploma required, • Desirable Certifications for this position are ACI Grade 1 Concrete, NYCMA QC/QA Certification; CME will provide full support in obtaining these certifications if do not currently possess, • Possess ability to maintain effective working relationships with managers, co-workers and clients through clear communication and proactive progress reporting, • Familiarity with construction materials, procedures and documents a plus, • Must possess and maintain a valid driver’s license Benefits CME offers competitive wages and benefits such as: Health, Dental, Vision, 401K, Health Savings Account, Supplemental Insurance Products, and Paid Time Off (including Holiday, Vacation, Sick and Personal) for full time employees. This is an Equal Employment Opportunity. All qualified applicants will be afforded equal employment opportunity without regard to race, color, sex, age, marital status, sexual orientation, gender identity, religion, national origin, disability, status as a protected veteran, or any other characteristic protected by federal, state, and local laws. CME Associates, Inc. is an Affirmative Action Employer. A New York State Certified Woman Owned Business Enterprise (WBE). Powered by JazzHR j01xX0l5iu

Job DescriptionDescription: Precast Project Engineer - Civil/Structural Precast Project Engineer – Shape the Future of Concrete Design and Mentor the Next Generation Are you a precast concrete expert ready to lead and inspire? Fisher Associates is seeking a Precast Project Engineer to serve as a Subject Matter Expert (SME) and guide our team in designing and delivering advanced precast and prestressed concrete structures. In this key role, you’ll mentor junior engineers, ensure design excellence, and drive innovation across diverse civil and structural projects. Working with multidisciplinary teams, you’ll develop efficient, sustainable, and code-compliant precast solutions that shape the built environment. Join Fisher Associates, where your leadership, expertise, and passion for precision fuel impactful projects and professional growth. Apply today to advance your career as a leader in precast concrete engineering and help shape the future of infrastructure design About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Lead and execute precast engineering and design tasks efficiently., • Collaborate with project teams to deliver structurally sound, cost-effective, and visually appealing precast concrete designs., • Perform and review structural analysis and calculations to ensure safety under various loads and conditions., • Select materials and components for precast concrete production that meet strength, durability, and sustainability standards., • Create accurate drawings, plans, and specifications for precast projects aligned with industry design standards., • Support cost estimation for materials, • Support Project Managers and Designers throughout the project lifecycle., • Maintain up-to-date knowledge of codes, technologies, and advancements in the precast-prestressed field., • Promote, utilize and support QA/QC processes to guarantee quality deliverables. Your Impact Matters, Your Career Thrives. Work on engaging precast engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promise any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-HYBRID Requirements: What You Bring, Your Expertise as a Precast Project Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 10 plus years of experience in precast concrete design engineering for transportation infrastructure and underground structures (utility vaults, manholes, drainage structures and pump stations)., • Familiarity with ACI 318, ACI 350, ASCE-7, AASHTO, • Familiarity with IBC codes a plus, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in AutoCAD & RISA 3D, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines., • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions

Job Description Join a team that nourishes life from farm to table! Upstate Niagara Cooperative, proudly owned by 200+ local family farms, is one of America’s largest and most stable dairy cooperatives. Guided by farmer- and employee-led values, we process and market high-quality milk, yogurt, dips, sour cream, cottage cheese, and more under our trusted brands: Upstate Farms®, Bison®, Milk for Life®, and Intense Milk®. Here, you’ll support sustainable farming, strong communities, and the mission to deliver fresh, local dairy to families every day. Position Summary We are seeking a dedicated Cheese Processing Supervisor to oversee daily operations within the Cheese Room, ensuring efficient, safe, and high-quality production. Working within established company policies, regulatory requirements, and the limits of assigned authority, this position provides leadership across Processing/Production, Maintenance coordination, and Quality Control activities. This role is essential to driving product quality, production efficiency, employee development, and adherence to safety and sanitation standards. While the role will begin on day shift, the Cheese Processing Supervisor must be able to flex hours to support second shift, night shift, weekend operations, sanitation validation, training needs, and special cheese projects as required. Essential Duties & Responsibilities Production & Operational Oversight • Achieve departmental goals for production volume, product quality, safety, shrink reduction, and cost control., • Coordinate daily production activities to meet business objectives and customer demand., • Oversee the cottage cheese blending process and coordinate production flow with the Filling Room., • Monitor Cheese Room cooks to ensure all procedures, temperatures, and processing parameters are followed., • Lead and support Preventive Maintenance efforts for all cheese-processing equipment., • Submit Work Orders for safety issues, quality concerns, equipment repairs, and process improvements., • Learn and apply the Pasteurized Milk Ordinance (PMO) as it pertains to plant operations, including understanding both HTST and batch pasteurization systems., • Obtain and maintain a Milk Receiver’s License., • Actively lead and enforce Food Safety, GMPs, sanitation requirements, and plant rules during all shifts., • Partner with QA to identify, escalate, and correct non-compliances; drive continuous improvement in product quality., • Provide clear leadership, direction, and coaching to employees to promote a positive working atmosphere and professional growth., • Assign job duties based on production needs, employee qualifications, and safe operating practices., • Monitor employee morale and address issues proactively to maintain a healthy department culture., • Lead onboarding, job training, cross-training, safety training, and ongoing developmental coaching., • Maintain employee records including attendance, tardiness, overtime, scheduling, and safety documentation., • Conduct accident investigations and document follow-up actions., • Prepare the weekly schedule and job assignments; must learn and work within the Teamsters Local 264 CBA., • Plan weekend coverage and ensure adequate staffing for production, sanitation, and project work., • Maintain an up-to-date knowledge and qualification matrix for all employees., • Lead and participate in CI activities focused on reducing safety incidents, improving operational efficiencies, optimizing cheese yields, and lowering costs., • High School Diploma or equivalent., • Minimum 1 year of experience in dairy manufacturing (cultured dairy experience preferred)., • Demonstrated leadership ability with experience motivating and developing employees., • Strong analytical thinking and problem-solving skills across multiple process areas., • Strong written and verbal communication skills., • Ability to manage multiple priorities in a fast-paced, 24/7 manufacturing facility., • Proficiency in MS Windows, Word, and Excel., • Must demonstrate initiative, enthusiasm, and a commitment to the organization’s mission. This is a salaried supervisory role. While the position will initially be assigned to day shift (Monday–Friday), the supervisor must be able to adjust hours as needed to support operational demands, including night or second shift presence, weekend coverage, sanitation verification, cheese project work, equipment commissioning, and training employees across shifts. Pay: $72K-$80K/Year* *The salary range indicated in this posting represents the minimum and maximum of the salary range for this position. Actual salary will vary depending on factors including, but not limited to, budget available, prior experience, knowledge, skill and education as they relate to the position’s qualifications, in addition to internal equity. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays. Upstate Niagara Cooperative, Inc. is committed to equal employment opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Job DescriptionJob Title: General Manager & Principal EngineerLocation: Amherst, NYHire Type: Direct HirePay Range: $175,000 - $225,000 Work Type: Full-timeWork Model: OnsiteWork Schedule: Monday – Friday, 8am – 5pm (flexible) Nature & Scope:Positional OverviewThe Imagine Group is recruiting for a General Manager & Principal Engineer on behalf of our client, a leading national provider of business and technology solutions, specializing in engineering, IT and healthcare services in Buffalo, NY.In this role, you will be responsible for the overall strategic direction, operational management and financial performance of a particular division of the company. This includes overseeing delivery, managing client relationships, driving business development, and supervision of engineering staff. The General Manager ensures projects are completed on time, within budget and to the highest quality standards while also fostering a culture of innovation, safety and continuous improvement. Role & Responsibility:Tasks That Will Lead To Your Success • Develop and execute transformation strategy: Create and implement a comprehensive plan to transition the firm from a primary focus on process engineering to offering a full range of engineering services, including mechanical, electrical, instrumentation, civil/structural, and project management capabilities., • Identify new service opportunities within existing core business and clients., • Promote engineering services for local and regional industrial and chemical sectors., • Strategic hiring and upskilling: Identify staffing and skill gaps necessary for the transition and develop a strategy to address them. This will involve coordinating with other engineering offices and recruiting experienced engineers from various disciplines and creating professional development programs to cross-train existing staff and build the firm's new capabilities., • Create and implement change management: Communicate the strategic vision and manage the organizational changes required for the transformation. Build a culture that embraces new challenges and fosters collaboration across different engineering disciplines., • Manage operational change: Establish the new internal processes, workflows, and procedures required for a full-service firm, such as integrating multi-disciplinary teams on projects and managing a broader scope of services., • Business Development & Client Relations, • Represent the firm's new capabilities: Act as the external face of the company. Represent its expanded capabilities to clients, industry groups, and at conferences to generate interest and new business., • Manage strategic partnerships: Identify and secure partnerships with other firms or contractors to augment capabilities during the transition phase, ensuring the firm can deliver on its new "full-service" promises., • Marketing and Sales: With sales staff direct identification of new market opportunities, grow the client base, and expand the firm's service offerings., • Trade Events and Outreach: With key engineering staff and sales team represent the firm in professional organizations, with clients, and at industry events to build and maintain positive relationships.Operational & Financial Leadership, • Strategic Planning: Develop and execute short-term and long-term strategic business plans to achieve company goals for growth, revenue, and profitability., • Budget and Financial Management: In coordination with the CFO and his team prepare and oversee departmental budgets, manage financial forecasting, and review profit and loss reports., • Project Contracting: Supervise and assist as needed Projects Managers and the Proposal Manager to manage contracts, prepare proposals and bids, and negotiate agreements with clients and partners. Team Leadership & People Development, • Provide mentorship, coaching, and professional development opportunities to team members to foster growth and improve performance., • Conduct performance reviews, set clear goals, manage resource allocation to maximize team efficiency, and promote professional development and cross-training to build a versatile engineering team., • Recruit, mentor, and cultivate a positive and collaborative work environment that encourages teamwork, high morale, and technical excellence. Technical & Quality Oversight • Maintain a deep understanding of the firm's technical services and industry trends to guide strategic decisions and drive innovation., • Direct and review engineering designs and changes, ensuring technical accuracy and soundness of methods used by staff., • Oversee quality assurance and quality control (QA/QC) processes for all project deliverables, ensuring the team's work complies with all relevant industry standards, regulations, and safety codes. Skills & ExperienceQualifications That Will Help You Thrive, • Bachelor's degree in an engineering discipline (e.g., Civil, Mechanical, Electrical, or related). Master’s degree in engineering management or an MBA is preferred., • Minimum 15+ years of progressive experience in an engineering field, including 5-7 years in managerial or leadership roles with P&L responsibility., • Professional Engineering (P.E.) license is required, in addition to proven experience in managing engineering operations, project delivery, and resource allocation., • Demonstrated success in business unit leadership, client development, and organizational transformation., • Expert-level technical knowledge relevant to the firm's specific engineering services., • Proficiency with industry-standard software, such as computer-aided design (CAD) programs, project management software (e.g., MS Project)., • Strong analytical skills for evaluating technical information and complex problems.

Job DescriptionDent Neurologic Institute is committed to excellence in all we do. Our culture is built on 4 key pillars: respect, quality, productivity, and well-being. By remaining dedicated to these values and the overall mission, we are dedicated to making a difference for both patients and colleagues. When you join the Dent team in a full-time or pat-time status, you can take advantage of a variety of benefits: • Work-Life Balance(no overnight shifts), • Medical, Dental& Vision Plans, • Life Insurance, • 401(k) Retirement Plan, • Critical Illness, Accident, & Legal Plans, • Wellness Program, • Learning &Development Opportunities, • Paid Time Off, • Paid Holidays, • Free Onsite Parking at All Locations Working Shift: Full-Time, Part-Time, Per-Diem Full-Time: Weekdays 2:30pm - 11pm, will include weekends, a regular Saturday shift 8am-4pm/6pm Imaging Department Hours: Monday-Friday, 6am - 11pm Saturday 8am - 6pm Sunday 8am - 4pm Location: Amherst & Williamsville Office Responsibilities: • Performs high quality MRI studies as ordered for expedited and accurate interpretation, recognizing needs for immediate medical intervention and reporting those studies accordingly., • Screens patients and communicates with patients regarding the scan, properly informs them of what to expect, potential side effects, next steps, etc., • Operates a variety of sophisticated medical equipment including Phillips and Siemens MRI Systems, Medrad Power Injector, AGFA Drystar film printer, computers, printers and recording devices., • Consults with Neuroimaging physicians at Dent in matters of departmental and equipment issues with a high degree of planning and initiative. Ensures proper function and maintenance of MRI equipment by consulting with service technicians under contract with Dent., • Coordinates scheduling of examinations with outside physician group referral sources to meet the needs of the patient and physician., • Independently problem solves and utilizes resources to obtain patient information when patient is unable to communicate. Assists in clerical duties as needed, functioning as a member of the health care team., • Maintains proper and appropriate records, logs and statistics of all patients seen in imaging centers. Develops and maintains monthly QA reports for imaging equipment., • Potentially may participate in clinical research studies in cooperation with outside referring physicians, maintaining valid data for Department of Neuroimaging. Develops and maintains educational case studies as requested, maintaining teaching files and lecture presentation materials. Under direction of Dent Neuroimaging physicians, assists in the education and training of Neuroimaging residents and fellows in performance of MRI studies., • Continually becomes educated on necessary protocols and/or changes to ensure all patient needs and ACR accreditation needs are met., • Administers IV contrast, injection and oral medications as per written/verbal MD order and imaging policy., • Maintains acceptable working conditions, assisting in development and implementation of policies and procedures that promote a safe, effective, quality driven work environment. Maintains competence through continuing education and in-service training., • Interacts calmly, respectfully and in a friendly manner with other representatives of services at the Dent., • Refers patients to proper clinical resources for health care questions and to proper personnel for Dent policies such as billing and or financial support. Maintains confidentiality of patient information. Requirements: • Associates Degree in Radiologic Technology, • Licensed in NY State in Diagnostic Radiology Preferred: • Board Certified in Magnetic Resonance Imaging, • Prior experience working on an MRI machine Here's what our current MRI Tech's have to say! "Working for Dent Imaging means holidays off with a generous amount of PTO." "Dent has a supportive and positive work environment, with easy access to management." "There are opportunities to learn many specialty scans, different scanner platforms, and research, such as fMRI." "There is a radiologist on site and available to answer any questions." "Dent is dedicated to stellar patient care." Compensation: • Most candidates will start within the first quartile of the pay range, • Rates are commensurate with experience EEO Statement Dent Neurologic Institute offers an inclusive work environment built on kindness and respect for all. Dent provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws as the basis for an employment decision. All qualified individuals are encouraged to apply and will receive consideration. 2:30pm - 11:00pm, will include weekends, a regular Saturday shift 8am-4pm/6pm

Job Description Southtowns Radiology, a Rezolut company, is seeking an MRI Technologist to join our team! Who is Rezolut? Rezolut is a national emerging platform of diagnostic medical imaging services. With focus on four key platforms, our vision is to provide topnotch patient care partnered with innovative technology — to achieve better health outcomes. We provide high-quality, cost-effective, fixed-site outpatient diagnostic imaging as well as mobile imaging and health services. In each of our regions, we are the best in radiology, offering all radiology services! Job Summary The MRI Tech will perform diagnostic testing by effectively and efficiently completing all MRI and MRA exams. The MRI Tech will be required to work at both Southtowns Orchard Park and Hamburg locations. Our ideal teammate: • Is a self-directed learner who is willing to apply direct feedback and continuously and humbly self-assess in order to grow personally and professionally., • Will work under general guidance with some expectation of autonomy., • Has excellent verbal and written communication skills and strong attention to detail., • Has the ability to prioritize tasks and to delegate them when appropriate., • Operate closed and open scanners., • Interpret physician instructions, select software options and imaging parameters when adjusting an MRI machine., • View images during exams and report anomalies to radiologists and document them., • Properly send images to PACs and archive images; print CDs., • Make sure comparison images are available for reading physicians., • Communicate effectively with radiologists to determine exam protocols, etc., • Maintain sensitivity to physical and psychological needs of patients., • Monitor and continually communicate with patients throughout the MR exam., • Work with Center Director to document incidents that occur at the facility., • Screen patients for any precautions or contraindications prior to them entering the magnetic field and thoroughly research all implants, devices, etc., • Perform daily QA for each magnet; maintain patient log; enter clinical information., • Perform injections as needed., • Maintain patient confidentiality in compliance with HIPPA guidelines., • ARRT Certification, • Bachelor’s degree in related field, or combination of education and experience., • Immediately accrue PTO as you work! (Full Time), • 6 Observed Holidays, • Medical, Dental, Vision, Life and other voluntary insurances for full-time employees, • 401(k) Retirement plan, • Employee Assistance Program, • Rezolut University, a career pathways program to help further your career!

Job Description Hazen and Sawyer is seeking entry-level engineers for our Buffalo and Rochester offices. As part of our design and process teams, you will work on water and wastewater projects, including drinking water/wastewater/reuse treatment facility upgrades, conveyance systems, wellfields, stormwater management, water resources, and asset management. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK., • A flexible hybrid work schedule supports today's busy professionals., • Assist in preparing engineering deliverables, including sampling studies, condition assessments, process modeling, hydraulics, and design reports., • Work directly with senior level engineering team providing mentoring opportunities to learn and develop., • Manage data for process modeling and design., • Attend client and internal project management meetings., • Coordinate with manufacturers and vendors to select equipment., • Support multiple projects from planning through construction., • Bachelor’s degree in environmental, civil, chemical, or mechanical engineering, • Strong interest in the water/wastewater industry, • Strong communication skills, self-motivation, organization, and attention to detail, • EIT certification, • Advanced degree (Master’s or Doctorate) in environmental, civil, chemical, or mechanical engineering, • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job Description Job Title: PET/Nuclear Medicine Technologist Reports to: Nuclear Medicine Manager Pay: To determine our range, we consider as many of the following data points as are available to us: external market salary survey data, internal data in terms of comparable roles and our budget for the position. What we have posted is our good faith estimate of what we expect to pay: $34-$42 an hour. Summary: The Nuclear Medicine Technologist works as a member of the Nuclear Medicine Team, reporting to the Nuclear Medicine Manager. This role provides Nuclear Medicine based imaging to patients and supports the patient experience throughout their time at GLMI. Effective communication between departments and exemplary patient care must be maintained. This role performs a variety of tasks beyond Nuclear Medicine imaging including; patient calls, documentation in charts, and assisting with both patient and other co-worker needs. Our Values: As a member of the team at GLMI it is expected that you embody the Great Lakes Way in your daily actions here. Personalize the Experience • Greet with eye contact and share a smile., • Create a tone of friendliness and warmth in conversations with patients, peers, and associates., • Respectfully interact with patients, peers, and associates at their pace and level., • Take time to listen to and understand others., • Demonstrate patience and compassion when interacting with patients, peers, and associates., • Do what you say you will do., • Anticipate and prevent potential problems., • Be responsible and efficient with Great Lakes resources (time, scheduling, property, equipment, etc.)., • Follow up on inquiries promptly and accurately., • Take personal responsibility for your work area and the quality of your work., • Speak positively about Great Lakes, team members, and patients., • Demonstrate respect and attentiveness to team members when communicating., • Recognize and share successes of the Great Lakes Way in action., • Proactively offer to help others., • Be flexible and embrace change with a positive attitude., • Contribute to a fun, energetic, and positive work environment., • Share information, knowledge, and expertise., • Be relentless about acting on opportunities to learn and improve., • Ask for, accept, and use feedback., • Accurately prepares, documents, dispenses and administers radiopharmaceuticals in accordance with the NYS DOH., • Effectively performs daily, weekly and monthly QC on the nuclear medicine and PET/CT cameras. Compiles and maintains accurate QC information., • Performs daily QA on Hot Lab equipment, to include the dose calibrator, well counter and survey meter. Maintain up to date QA documentation and dose administration records, complying with all State and Federal regulations., • Positively identifies patient by at least two forms of identification, • Demonstrates proficiency in starting intravenous catheter line and injecting isotopes., • Performs diagnostic exams on patients as prescribed by physician and per protocol manual, resulting in high quality exams., • Utilizes RIS/PACS Computer system to maintain patient information maintaining confidentiality., • Ensures all pertinent history is complete and accurate., • Responsible for the care and safety of patients undergoing exams. Performs all aspects of patient care in an environment that optimizes patient safety and reduces the likelihood of errors. Accurately documents all incidents utilizing the appropriate forms., • Consistently maintains a clean and safe working environment. Ensures equipment is cleaned between patient uses and keeps work areas in order., • Maintains proper inventory on all supplies and ensure no shortages of supplies that cause delay in patient care., • Practices medical aseptic techniques. Ensures appropriate PPE is used at all times., • Effectively performs other duties as assigned by management and/or leadership., • Uses computer and software relative to position effectively and efficiently in the working environment., • Must be able to assist patients on/off tables and wheelchairs as needed., • Communicates clearly and effectively both orally and written., • Must be licensed by NYS DOH, • Certified or Registered NMT-American Registry of Radiologic Technologists (RT, N) OR Nuclear Medicine Technology Certification Board (CNMT), • May be asked to lift up to 50 pounds, • Standing, walking, sitting, keyboard use for long periods of time, • Ability to listen and communicate with patients face to face or over the phone, • Will be required to read, write, work in a fast-paced office setting, • Ability to make decisions and think quickly, • Must have mental and physical capabilities to perform all tasks listed above Job Posted by ApplicantPro

Job DescriptionDescription: Precast Design Engineer - Civil/Structural Join Our Team as a Precast Design Engineer – Innovate and Lead in Concrete Design Are you ready to take your engineering career to new heights? Fisher Associates is seeking a skilled Precast Design Engineer to join our dynamic team, where your expertise in designing precast concrete components will make an impact on diverse civil and structural projects. Join Fisher Associates and bring your talents to a team that values innovation, collaboration, and your unique contributions. Apply now to advance your career and play a key role in impactful projects within a supportive and dynamic environment! About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Lead and execute precast engineering and design tasks efficiently., • Collaborate with project teams to deliver structurally sound, cost-effective, and visually appealing precast concrete designs., • Perform and review structural analysis and calculations to ensure safety under various loads and conditions., • Select materials and components for precast concrete production that meet strength, durability, and sustainability standards., • Create accurate drawings, plans, and specifications for precast projects aligned with industry design standards., • Support cost estimation for materials, • Support Project Managers and Designers throughout the project lifecycle., • Promote, utilize and support QA/QC processes to guarantee quality deliverables. Your Impact Matters, Your Career Thrives. Work on engaging precast engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promise any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Precast Design Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5 -10 years minimum Precast concrete design engineering experience, • Experience in precast concrete design engineering for transportation infrastructure and underground structures (utility vaults, manholes, drainage structures and pump stations) preferred, • Familiarity with ACI 318, ACI 350, ASCE-7, AASHTO, • Familiarity with IBC codes a plus, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in AutoCAD & RISA 3D, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines., • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions

Job DescriptionSalary: $22.00/hr Position Summary: As the QA Document Control Associate, you will support Quality Assurance (QA) activities. Activities include but are not limited to: Maintenance and organization of the Central File system, Issuance of documents, Review and Release of Batch Records, and Support of MasterControl tasks (such as Document Collaborations). All in accordance with current Good Manufacturing Practices and 21 CFR 210/211. Essential Functions: • Generation and Issuance of controlled documents, including but not limited to Batch Record documents/forms, specification, and logbooks., • Review of lot specific documentation for Batch Production Records (including raw data, batch record associated pages, release specifications, and test results) to confirm accuracy, completeness, and compliance to ensure prompt batch disposition and release., • Confirm disposition of batch-associated nonconformances and quality events prior to batch release., • Identification and routing of documents (both paper and electronic) for corrections in cases of missing or incorrect documentation., • Work with company personnel to correct any mistakes identified during review., • Use ERP system to select the proper disposition of individual batches and notification of availability for distribution., • Generation of controlled labels utilized throughout the manufacturing and packaging process., • Review of logbooks, as needed., • Maintain and control the Central File system utilized for the storage of all paper-based documents needed for retention., • Maintain department for readiness for internal and external audits., • Retrieval of documents from filing systems during times of internal or external audits., • Control of department inventory needs, regarding supplies needed for batch record and document issuance, and the central filing system., • Support Document Collaboration and Set Dates for all document creation/revisions., • Support the maintenance and control of electronic document archival within the MasterControl Software., • Build and maintain collaborative working relationships within the organization., • Effective communication throughout all facets of the organization., • Follow and solicit good manufacturing and documentation practices., • Support QA activities as needed., • Support Quality management System continual improvement initiatives., • Triage workflow to ensure first in-first out or priority release of finished product or product dependent documents according to distribution needs., • Other activities/tasks as dictated by departmental and organizational needs. Education and Experience: • A High School diploma or equivalent and a minimum1 year experience in a regulated environment, Pharma or other medical preferred., • Or an Associate degree or Bachelor degree in Science/Life Sciences preferred., • Must be proficient with computers. Knowledgeable with standard Microsoft Office suite, email, document scanning, and strong Excel and Word experience. Knowledge, Skills, and Abilities: • Knowledge of GMPs., • Knowledge & experience with organization and filing of controlled documents., • Knowledge & experience with use of electronic Quality Management Systems., • Excellent interpersonal communication skills., • Must be able to work independently and as part of a team., • Must have attention to detail., • Self-motivated and organized.

Job DescriptionDescription: Highway Design Engineer – Civil/Structural | Shape the Future of Transportation Ready to build the highways of tomorrow? Are you a skilled Highway Design Engineer with a passion for designing safe, efficient, and innovative transportation systems? Join our dynamic team of civil and structural engineering professionals where your expertise in roadway design, highway infrastructure, and transportation engineering will directly impact the communities we serve. In this role, you’ll play a key part in designing highways, roadways, intersections, and other critical transportation infrastructure projects. You’ll collaborate with multidisciplinary teams to solve complex engineering challenges and ensure all designs meet industry standards, environmental requirements, and safety regulations. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Demonstrated ability to efficiently manage highway design projects, including drainage, alignments, and related tasks., • Prepare and maintain comprehensive design plans, detailed specifications, technical reports, and accurate cost estimates., • Ensure designs adhere to state and local standards, regulations and safety codes., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • Collaborate with internal teams, clients, subconsultants and agencies to ensure seamless project delivery., • Proactively support project managers with schedules, documentation, and presentations. Your Impact Matters, Your Career Thrives. Work on engaging Highway Design Engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Highway Design Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5-10 years of transportation experience Highway Design Engineering experience preferred, • EIT required, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in MicroStation, STAAD, OpenRoads, and Bridge Design Software preferred., • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred), • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines., • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions

Job DescriptionDescription: Shape the future of infrastructure through innovative highway and bridge engineering Are you an experienced Transportation Project Manager ready to lead high-impact civil engineering and transportation infrastructure projects? Fisher Associates seeks a motivated professional to manage and deliver innovative highway and bridge design solutions. Whether you’re a licensed Professional Engineer (PE) or an EIT nearing licensure, this is your opportunity to advance your leadership career and drive critical infrastructure projects that improve mobility and safety. At Fisher Associates, we support your growth, leadership, and innovation—your success is our priority. Ready to advance your career and shape the future of infrastructure? Apply now to join Fisher Associates! About Fisher Associates Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Proactively pursue new business with existing and prospective clients by delivering exceptional service, promoting Fisher’s capabilities, and building lasting relationships., • Successfully lead mid-to-large-scale transportation projects from initial setup through planning, safety analysis, and project kick-off., • Manage project budgets, scope, schedule, and staffing to ensure successful and timely project delivery., • Lead design strategy and collaborate with teams, clients, partners, and stakeholders to align with client goals and ensure seamless project delivery., • Oversee project billing, client updates, QA/QC of deliverables, and project closeout., • Provide clear direction, motivation, and mentorship to team members., • Prepare winning project proposals and serve as primary client contact throughout the process., • Successfully navigate and implement complex public processes and municipal approvals., • Represent Fisher Associate’s in professional organizations, business boards, and community activities. Your Impact Matters, Your Career Thrives. Work on engaging projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid #LI-CA1 Requirements: What You Bring, Your Expertise as a Senior Transportation Project Manager • B.S. degree in Civil Engineering (Master’s preferred), • 10+ years in civil transportation engineering, including project management of DOT-funded highway and bridge projects, • Professional Engineering License (PE) preferred or ability to obtain it, • Proven client relationship and business development skills in transportation sector, • Proficiency in MS Office; MicroStation preferred, • Familiarity with NYDOT or PennDOT design standards preferred, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines, • Foster trust and collaboration through integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions

Job DescriptionDescription: Are you ready to take the next step in your project management career? Fisher Associates is seeking a motivated Transportation Project Manager with a strong foundation in civil engineering, infrastructure design, and quality control to join our growing team. In this role, you’ll play a key part in ensuring the technical accuracy, functional quality, and creative problem-solving that define our project success. You’ll work collaboratively with internal teams and directly with clients—managing deliverables, maintaining client satisfaction, and driving projects forward from concept through completion. If you're passionate about project delivery, client service, and continuous improvement, we want to hear from you. Join a firm where your voice matters and your growth is a priority. Ready to join us? Apply today and start leading projects that shape your community. About Fisher Associates Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Collaborate with internal teams, clients, subconsultants and agencies to ensure seamless project delivery., • Successfully lead projects from initial setup through planning, safety analysis, and project kick-off., • Manage project budgets, scope, schedule, and staffing to stay on plan., • Oversee project billing, client updates, QA/QC of deliverables, and project closeout., • Lead transportation design projects, ensuring compliance with industry, regulation, and safety standards., • Support the preparation of project proposals by collaborating with senior staff and technical teams., • Coordinate with design teams to develop detailed plans, specifications, drawings and bid packages., • Perform technical reviews and provide guidance to resolve design challenges., • Manage a project team, fostering a collaborative and productive work environment., • Assign tasks, monitor progress, and provide guidance to ensure project milestones are met. Your Impact Matters, Your Career Thrives. Work on engaging transportation engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid #LI-CA1 Requirements: What You Bring, Your Expertise as a Transportation Project Manager • B.S. degree in Civil Engineering, Master’s preferred, • 7+ years transportation design engineering and project management experience, • Ability to manage transportation projects including highways, structures and traffic., • Professional Engineering License (PE) preferred or ability to obtain it, • Proven Client relationship and business development experience, • Proficiency in MS Office programs and MicroStation (preferred), • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred), • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Demonstrated high-quality work and ability to problem solve applying critical thinking, and sound judgment to challenges, • Driven to take ownership of projects, prioritize tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth, • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships, • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset

Job Description Come join John W. Danforth Company, one of the largest mechanical contractors in the Northeast! We are an employee-owned company and believe our greatest asset is our people. We are looking for team members who are passionate about delivering industry-leading experiences to our customers and supplying turn-key solutions for any HVAC, refrigeration, critical environment, custom metal fabrication, energy performance, or specialty mechanical project. Are you passionate about cutting-edge technology and driven by innovation? Do you thrive in a collaborative environment where your work makes a direct impact on both the company and the community? We’re seeking a VDC Piping Manager who is ready to take full ownership of project execution and team development. In this role, you will be responsible for assigning project work, mentoring your team, and ensuring all VDC piping efforts are completed on time and within scope. You'll play a critical role in managing VDC hours and deliverables while driving success through clear communication, technical expertise, and strategic oversight. Our VDC team is continuing to grow, and this is an exciting opportunity to be part of shaping its future. What We Offer: • Danforth invests in you and your future with directed employee engagement, team support, career development, and mentoring., • We are a professional organization offering quality benefits including:, • Medical, dental, disability, and life insurance, • 401(k), and ESOP with generous profit-sharing/matching contributions., • Competitive PTO, holidays, and other financial incentives What We Ask of You: • Lead and manage the VDC Piping team by assigning project work and ensuring project specifications are accurately executed, • Keep projects on track by effectively managing VDC hours and meeting key milestones, • Develop and model piping systems in Revit, and collaborate with Project Managers to establish and maintain VDC schedules, • Conduct training sessions for the piping team, uphold QA/QC standards, and foster a supportive, high-performing team environment Experience & Competencies: • AAS/BA in a related field or equivalent industry experience; certifications may be required, • Excellent written and oral communication skills, integrity, and enthusiasm, • Technical Proficiency in Piping, • 7+ years in HVAC VDC, • 7+ years in 3D modeling and coordination, • Experience with Navisworks, Revit and Stratus, • Familiarity with Trimble Connect and Vic Tools, • Ability to manage complex projects and work collaboratively to create a results-driven environment Danforth offers a competitive benefits package for eligible employees including medical, dental, vision, life, disability, paid time off, 401(k), with company match, and participation in our Employee Stock Ownership Plan (ESOP). The estimated compensation range for this role is $75,000 - $110,000. This range is based on several factors, including individual education, qualifications, training, prior work experience, and work location. John W. Danforth Company is an equal opportunity employer and is committed to a workplace free from discrimination. All employees and applicants for employment will be considered without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

At Labcorp, we believe in the power of science to change lives. We are a leading global life sciences company that delivers answers for crucial health questions -because we know that knowledge has the potential to make life better for all. Through our unparalleled diagnostics and drug development capabilities, we provide insights and accelerate innovations that not only empower patients and providers but help medical, biotech, and pharmaceutical companies transform ideas into innovations. Here, you can join our more than 70,000 employees, serving clients in more than 100 countries, as we work together to make a real impact on people's lives. Join us in our pursuit of answers. OmniSeq by Labcorp in Buffalo, NY is seeking a licensed Medical Laboratory Scientist (CLS/MLS/MLT/CLT) to join our Biopharma services team. No previous molecular experience necessary. Extensive hands-on training will be provided. We're offering the opportunity to work within a supportive, team-oriented, and engaging environment. Apply now to make a tangible impact in the field of cancer diagnostics and treatment. We are currently offering a 1st shift position . PRIMARY DUTIES • Support testing as part of clinical trial assays and contract research agreements., • Process blood and tissue samples provided to the laboratory as needed for various projects., • Perform macrodissection on FFPE., • Record and analyze data to ensure QA/QC at each workflow step; ensures completeness and accuracy of data, • Extract and quantify RNA and DNA using manual and automated processes., • Prepare extracted RNA and DNA to be tested with Next-Generation Sequencing (NGS)., • Perform NGS testing using manual and automated processes., • Interact with other departments, collaborators, and clients in a professional manner., • Perform instrument maintenance and troubleshooting when necessary., • Maintain a clean, safe, well stocked work environment in accordance with molecular standards and wear appropriate personal protective equipment., • Utilize Laboratory Information Management Systems for tracking and documenting patient samples and processes., • Other duties as needed. REQUIRED LICENSURE, EDUCATION • Associates or higher in Medical Laboratory Technology or related discipline required, • Must have an appropriate, valid NYS professional license prior to starting Pay Range: $32.00 - $39.00 All job offers will be based on a candidate's skills and prior relevant experience, applicable degrees/certifications, as well as internal equity and market data. Benefits: Employees regularly scheduled to work 20 or more hours per week are eligible for comprehensive benefits including: Medical, Dental, Vision, Life, STD/LTD, 401(k), Paid Time Off (PTO) or Flexible Time Off (FTO), Tuition Reimbursement and Employee Stock Purchase Plan. Casual, PRN & Part Time employees regularly scheduled to work less than 20 hours are eligible to participate in the 401(k) Plan only. For more detailed information, please click here . Labcorp is proud to be an Equal Opportunity Employer: Labcorp strives for inclusion and belonging in the workforce and does not tolerate harassment or discrimination of any kind. We make employment decisions based on the needs of our business and the qualifications and merit of the individual. Qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), family or parental status, marital, civil union or domestic partnership status, sexual orientation, gender identity, gender expression, personal appearance, age, veteran status, disability, genetic information, or any other legally protected characteristic. A dditionally, all qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable law. We encourage all to apply If you are an individual with a disability who needs assistance using our online tools to search and apply for jobs, or needs an accommodation, please visit our accessibility site or contact us at Labcorp Accessibility. For more information about how we collect and store your personal data, please see our Privacy Statement .

Job Description Filling Operator Lornamead is currently seeking a Filling Operator to join our team! Lornamead, Inc. manufactures and supplies, hair care, skin care, oral care, and bath products in America. The company offers toothpastes, teeth whitening products and oral analgesics for drug chains, and national food retailers. The company is headquartered in Tonawanda, New York. Your Challenge: • Operate filling & packaging line in a cGMP Manufacturing plant, • Perform & document start-ups, operations, and in-process QA checks, • Record operating parameters, material usage, test results, scrap, and production output, • Verify and reconcile material lots and consumption, • Perform setups and changeovers on filling machines, • Work directly with maintenance and supervisors to pinpoint problem areas with equipment, • Perform operational adjustments as needed to ensure high quality product, • Perform basic cleaning of production change parts and pumps, • Complete documentation for cleaning for all parts and vessels, managing daily usage and cleaning log book and any other documents needed for the area, • Oversee packaging associates (2-5 people) on assigned line, • 2+ years of applicable experience operating filling / packaging equipment in food, pharmaceuticals, or similar industry, • Good mechanical abilities, • Good math skills, • Good documentation skills, • Attention to detail, • Experience leading a production line team 3:00 p.m. - 11:30 p.m. Mon. - Fri.

A company is looking for a Disability Claims QA specializing in Long Term Disability.Key Responsibilities: Assess the quality of physician reports to ensure compliance with client and jurisdictional standards Verify claims support for physicians' determinations in long-term disability cases Prov

A company is looking for a Pega QA Test Engineer / Automation Tester (Mid/Senior).Key Responsibilities Create test plans, test cases, and test automation for Pega workflows and integrations Perform functional testing, regression testing, UAT support, and defect tracking Validate business rules,

What We Love About This Job: \n\n • Pay - $85k - $130k Depending on experience\n, • Unbelievable Benefits From Day 1 - unlimited PTO, onsite clinic with physicians, opticians, dieticians, physical therapists, pharmacy, etc\n, • Brand New Facility - 100k+ sqft state-of-the-art manufacturing space\n, • Leading, developing and coaching high-performing teams of employees.\n, • Leading through influence and partnering with cross-functional teams to develop and deliver tactical plans that achieve operation objectives.\n, • Effectively leading through organizational changes.\n, • A continuous improvement mindset, with a proven track record of enacting lean manufacturing strategies and implementing process/programming improvements.\n, • Excellent written and verbal communication skills.\n, • A strong ability to find opportunities to lean out processes including inspection equipment and inspection work holding techniques.\n, • Lead a team of direct reports that include inspection programmers.\n, • Be part of the manufacturing quality leadership team which will include the Inspection manager and the PQE manager.\n, • Collaborate with a cross-functional staff demonstrating Moog Culture and Values\n, • The ability to work tactically to complete the day to day activities and a focus on continuous improvement to set ourselves up for the future.\n, • Standardize programming techniques and inspection tools to reduce programming time.\n, • Facilitate resolution of all issues that may impact objectives for quality, cost, delivery and safety.\n, • Coordinate functions to ensure all required support services are effectively and efficiently planned, provided, and utilized.\n, • Champion and foster a culture of collaboration, results-based operational excellence, customer orientation, strong awareness of quality, process orientation and continuous improvement and safety.\n, • Recognize future inspection issues or constraints and develop a plan to avoid them before they become a problem.\n, • Ensure that relevant, accurate, and timely communication and reports are acquired from and delivered to stakeholders.\n \n EOE/AA Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran \n Moog is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, please contact us

Key Responsibilities Update and maintain website pages for accuracy, accessibility, and SEO alignment Manage website CMS and collaborate with cross-functional teams to optimize site performance Conduct webpage QA, monitor performance, and assist in troubleshooting technical issues Required Qual

Job DescriptionWelding Inspector (CWI) | GTI Fabrication – Buffalo, NYCompany Overview GTI Fabrication specializes in the design, engineering, and fabrication of custom modular structures, ballistic metal fabrication, and shipping container-based solutions. We serve a wide range of industries, including DOD contractors, military, disaster relief, and commercial markets. Our Buffalo, NY facility houses all aspects of manufacturing, welding, and quality control, ensuring top-tier craftsmanship and compliance with industry standards. Position Overview We are seeking a Certified Welding Inspector (CWI) to oversee QA/QC for our welding operations, ensuring compliance with customer specifications, ASME codes, and safety regulations. This role works independently from the welding team while collaborating closely with the Quality Assurance Department to maintain high standards in welding inspection and defect prevention. Key ResponsibilitiesWelding Inspection & Quality Assurance • Welding Inspector must be able to interpret and inspect blueprints, drawings, and customer specifications., • Ensure compliance with ASME WPS (Welding Procedure Specifications) and welder/welding operator qualifications., • Conduct visual inspections and penetrant testing (PT) per ASME Code., • The Welding Inspector will approve incoming materials, verifying specifications and conducting visual and measurement tests., • Oversee in-process and final product inspections, ensuring welds meet required standards., • Identify defects and recommend corrective actions to management.Quality Control & Documentation, • Maintain inspection records and quality reports to track compliance., • The Welding Inspector will ensure reworks are completed to standard before final approval., • Assist in developing solutions to improve inspection processes and welding quality. GTI Fabrication is an equal opportunity employer and welcomes applicants from all backgrounds.

Mercor is looking for a STEM Expert with experience in biology / physics / chemistry theory and problem-solving to develop and refine high-quality reasoning questions that evaluate AI models. Your knowledge in biology / physics / chemistry will ensure the accuracy, rigor, and instructional quality of these test items. * * * ### Job Details: - Design and Optimize STEM-Based Prompts: Create detailed prompts with multiple constraints and scientific instructions. - Define and Document Evaluation Standards: Establish high-level expectations for correct responses in STEM contexts, and develop comprehensive rubric. - Conduct Model Testing and Grading: Run prompts through models and assess preliminary outputs against expectations. - Support Benchmarking and Quality Assurance: Collaborate in QA review processes to ensure prompt tasks and rubrics meet scientific rigor, maintaining consistency and reliability before integration into official benchmarks. ### Minimum Qualifications: - BS or BA in Biology / Physics / Chemistry - Familiarity with undergraduate-level biology / physics / chemistry topics - Strong writing and critical thinking skills. - Ability to work independently and meet deadlines. ### Preferred Qualifications: - 2+ years of experience in teaching, research, or applied STEM discipline field. ### Application & Onboarding Process: - Complete an AI-led interview, this should take around 15 minutes. - Complete a 45-minute written assessment that will guide you through writing rubrics. - If selected, you will be invited to work on the project. ### More Details About This Role: - This is a remote and asynchronous role — work on your own schedule. - Expect to contribute at least 20 hours per week. - Expect a commitment of around 1 month. - You’ll be working in a structured project environment with clear goals and tools. * * * ### About : - Our team is based in San Francisco, CA - We [ in recruiting experts for top AI labs - Our investors include Benchmark, General Catalyst, Adam D’Angelo, Larry Summers, and Jack Dorsey

Mercor is partnering with a top AI research organization to evaluate and improve how coding assistants reason, act, and communicate during development workflows. We’re seeking technically sharp experts (especially those with experience in code review, testing, or documentation) to assess full transcripts of user–AI coding conversations. This short-term, fully remote engagement helps shape the future of developer-assisting AI systems. Key Responsibilities • Review long-form transcripts between users and AI coding assistants • Analyze the AI’s logic, execution, and stated actions in detail • Score each transcript using a 10-point rubric across multiple criteria • Optionally write brief justifications citing examples from the dialogue • Detect mismatches between claims and actions (e.g., saying “I’ll run tests” but not doing so) Ideal Qualifications Top choices: • Senior or Staff Engineers with deep code review experience and execution insight • QA Engineers with strong verification and consistency-checking habits • Technical Writers or Documentation Specialists skilled at comparing instructions vs. implementation Also a strong fit: • Backend or Full-Stack Developers comfortable with function calls, APIs, and test workflows • DevOps or SRE professionals familiar with tool orchestration and system behavior analysis Languages and Tools: • Proficiency in Python is helpful (most transcripts are Python-based) • Familiarity with other languages like JavaScript, TypeScript, Java, C++, Go, Ruby, Rust, or Bash is a plus • Comfort with Git workflows, testing frameworks, and debugging tools is valuable More About the Opportunity • Remote and asynchronous — complete tasks on your own schedule • Must complete each transcript batch within 5 hours of starting (unlimited tasks to be done) • Flexible, task-based engagement with potential for recurring batches Compensation & Contract Terms • Competitive hourly rates based on geography and experience • Contractors will be classified as independent service providers • Payments issued weekly via Stripe Connect Application Process • Submit your resume to begin • If selected, you’ll receive rubric documentation and access to the evaluation platform • Most applicants hear back within a few business days About Mercor • Mercor is a talent marketplace that connects top experts with leading AI labs and research organizations • Our investors include Benchmark, General Catalyst, Adam D’Angelo, Larry Summers, and Jack Dorsey • Thousands of professionals across law, engineering, and research contribute to frontier AI projects via Mercor

Job Description Role Overview: The 2nd Shift Foreman is responsible for the management and coordination of all production activities, operations and staff for their departments. The Foreman will ensure conformance to established procedures, implement practices that maximize production efforts, improve overall effectiveness of assigned operations, create a safe working environment for all staff members, and ensure project timelines and deliverables are met. *2nd shift schedule is Monday-Friday, 3:30pm-12:00am Job Responsibilities: • Reviews, analyzes, modifies, and implements efficient and effective department processes, policies, and procedures., • Interfaces with QA Manager to ensure highest degree of final quality and develop new and better quality methods., • Ensures approved manufacturing methodology is being followed., • Develops and communicates goals and key initiatives to improve plant performance and success., • Develops, monitors, and provides access to daily production requirements., • Maintains knowledge of the skills of the labor force to manage in time of employee absence or unexpected peak demands., • Interfaces with Operations Manager to control operating costs., • Maintains knowledge of machine capacity and develops solutions for efficient utilization., • Ensures all safety rules and regulations are followed; investigates accidents in a timely, accurate, and complete manner., • Coordinates and manages all safety training., • Prepares all required reports and correspondence., • Develops, implements, and monitors department budget; manages expenses within approved budget constraints., • Identifies, documents, and implements opportunities for continuous improvement., • Hires, trains, supervises, motivates, and develops production staff; manages schedules and workflow., • Assigns duties and monitors quality of work; assures staff conforms to organizational policies and procedures and government regulations., • Provides day-to-day guidance and oversight of subordinates; actively works to promote and recognize performance., • Keeps up to date on overall activities of the team, identifying problem areas and taking corrective actions., • Directly supervises employees assigned to their departments and carries out supervisory responsibilities in accordance with organizational policies and procedures., • Two to four years related experience or equivalent., • Demonstrated proficiency in supervising and motivating direct reports, • Commitment to excellence and high standards, • Excellent written and oral communication skills, • Basic competence in direct reports duties and tasks, • Strong organizational, problem-solving, and analytical skills, • Ability to manage priorities and workflow, • Versatility, flexibility, and a willingness to work within constantly changing priorities with enthusiasm, • Ability to work independently and as a member of various teams and committees, • Proven leadership skills, • Proven ability to handle multiple projects and meet deadlines, • Strong interpersonal skills., • Ability to deal effectively with a diversity of individuals at all organizational levels., • Good judgement with the ability to make timely and sound decisions, • Ability to understand any and all safety requirements and cautions, • Ability to perform the physical labor necessary, • Ability to effectively communicate with people at all levels and from various backgrounds.

Remote Digital Analytics Manager Job: Contract Pay Rate Range: $40-47.50 per hour based on experience, education, geographic location and other factors. This role blends product ownership with delivery management, you will lead a GA4/GTM implementation, govern event taxonomy, audit data quality, and ensure measurement is aligned to business goals. The Digital Analytics Manager will influence both the implementation of data capture and the output derived from that data, ensuring integrity and usefulness end-to-end. You’ll be responsible for defining, refining, and reporting on KPIs that measure both platform health and business performance, while producing actionable insights for Marketing, Merchandising, and leadership. Remote Responsibilities of the Digital Analytics Manager Job: • Lead GA4 + GTM implementation (including server-side where applicable)., • Translate business objectives into measurable KPIs and reporting requirements., • Write Features, Epics, and User Stories in Azure DevOps, define acceptance criteria, and manage analytics delivery through development sprints., • Partner with Engineering, UX, and Product teams to ensure analytics instrumentation aligns with key user journeys and funnels., • Build and manage executive and operational dashboards (Looker Studio/Tableau/BigQuery) for ongoing KPI tracking., • Establish measurement standards and KPI definitions across global regions., • Audit event collection and funnel integrity; open and track data issues with development teams., • Own documentation for tagging guides, measurement frameworks, KPI definitions, and QA protocols., • Partner closely with Marketing (campaign attribution, channel ROI, conversion lift) and Merchandising (product performance, catalog optimization, search/browse effectiveness) teams., • Provide polished reporting and presentations with actionable insights for cross-functional stakeholders., • Deliver weekly/monthly performance reviews with clear storylines: what’s happening, why, and what action is recommended., • Lead the analytics perspective in planning sessions for campaigns, promotions, merchandising changes, and new feature launches. Remote Qualifications of the Digital Analytics Manager Job: • 2–4+ years in digital/web/product analytics with GA4 + GTM experience., • Ability to define, refine, and report on KPIs that drive business decisions., • Working knowledge of BigQuery/SQL and GA4 exports with commerce/order data., • Experience creating dashboards in Looker Studio/Tableau with solid data storytelling skills., • Demonstrated collaboration with Marketing and Merchandising teams to optimize performance., • Clear communication skills, both written and verbal; comfortable presenting findings to teams and leadership. For more information or to be considered for the Digital Analytics Manager Job please contact Equal Opportunity Employer/Veterans/Disabled Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, an EAP program, commuter benefits, and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs that are direct hires to a client. To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit ___.

Role Overview: We are seeking an experienced Business Analyst with strong expertise in Payments and Wires systems to join our team. The ideal candidate will analyze business requirements, design system solutions, and ensure seamless integration of wire transfer and payment functionalities across various financial platforms. Key Responsibilities: • Gather, analyze, and document business and functional requirements for domestic and international payments (ACH, SWIFT, Fedwire, SEPA, CHAPS, RTP, etc.)., • Translate complex business needs into clear functional and technical specifications., • Work closely with Product Managers, Developers, QA, and Operations teams to design and implement enhancements to payment and wire systems., • Conduct gap analysis, impact analysis, and root cause analysis for existing payment processes., • Support end-to-end payment processing lifecycle — initiation, validation, authorization, clearing, and settlement., • Partner with stakeholders to ensure compliance with regulatory requirements (e.g., ISO 20022, SWIFT standards, AML, OFAC, and KYC)., • Define and manage UAT test plans, test cases, and coordinate with business users for validation., • Create process flows, data mappings, and use case documentation for payment applications., • Identify opportunities for automation, process improvement, and system optimization., • Support production releases and post-implementation reviews to ensure stability and compliance. Required Skills and Experience: • 5+ years of experience as a Business Analyst in the financial services or banking domain, with a focus on Payments or Wire Transfers., • Strong knowledge of payment rails (SWIFT, Fedwire, CHIPS, RTP, SEPA, ACH)., • Experience with ISO 20022 message formats and payment processing standards., • Understanding of payment life cycle, settlement processes, and reconciliation., • Exposure to Treasury systems, Core Banking, or Payment Hubs., • Experience working in Agile/Scrum environments., • Excellent communication, analytical thinking, and stakeholder management skills., • Proficiency in SQL and data analysis tools (preferred)., • Familiarity with API integrations and FinTech payment platforms (a plus). Preferred Qualifications: • Bachelor’s degree in Finance, Business, Computer Science, or related field., • Certifications such as CBAP, PMI-PBA, or Agile/Scrum., • Experience with SWIFT Alliance Access, Temenos, FIS, Finastra, or Bottomline systems.

**NO 3rd Parties or Sponsorship! Role Title- IT Operations Lead- Incident Management Duration- 12+ months Location- Buffalo NY Preferred or remote with travel. Role Description: The IT Operations Lead is responsible for planning and orchestrating releases across environments, safeguarding production stability, and driving continuous improvement through disciplined Incident and Problem Management. This role partners closely with Test Management, Change Management/Comms, Governance, and Service Management to deliver reliable outcomes for strategic portfolios and regulatory commitments. Key Responsibilities Release Management • Own the release calendar, scope, and readiness criteria across dev, test, UAT, and production environments., • Chair Scoping and Go/No-Go Tollgate meetings; ensure controls, sign offs, and rollback plans are in place., • Coordinate deployments with engineering, QA, business SMEs, and Change Management; align with governance and risk requirements., • Maintain deployment runbooks, environment plans, and dependency maps; drive automation and CI/CD best practices., • Track release outcomes (defect leakage, change failure rate, MTTR, deployment frequency) and report to leadership., • Incident Management, • Lead major incident response (P1/P2): mobilize resolvers, manage comms, and restore service quickly., • Operate the incident command process war room facilitation, real-time decisioning, stakeholder updates, and post-restoration verification., • Ensure high-quality incident records, accurate impact/time-to-recover metrics, and effective business communication., • Problem Management, • Drive root cause analysis (RCA) and corrective actions (CA) for recurring issues., • Maintain the Known Error Database (KEDB) and trend analysis; proactively eliminate failure modes and reduce risk., • Partner with engineering and testing to prioritize fix-forward items and embed learnings into release plans., • Governance, Controls & Compliance, • Align releases and service restoration activities with SOX/GLBA, auditability standards, and internal governance., • Ensure adherence to Change Management policies, risk assessments, and production deployment controls., • Provide quarterly control attestations and evidence for audits., • Stakeholder Engagement & Communication, • Serve as the single point of contact for portfolio leaders on release readiness and service stability., • Draft executive-ready communications (pre-release advisories, outage notifications, post-incident reports)., • Build transparent, trust-based relationships with Finance, Operations, PMO, and vendor partners. Requirements: • Bachelor's degree in Information Systems, Computer Science, Engineering, or equivalent experience., • ITIL 4 (Managing Professional or Strategic Leader)., • DevOps certifications (e.g., DASA, DevOps Institute) or SRE training., • Project/program certifications (PMP, SAFe, Scrum) are a plus., • Key Performance Indicators (KPIs), • Change Failure Rate, Change Related Defects and Incidents., • Time-to-Respond, Time-to-Restore, Recurring Incidents., • % of releases with complete controls & evidence; audit findings remediated on time., • Stakeholder satisfaction scores and communication effectiveness., • Tools & Technologies, • ITSM: ServiceNow, JIRA Service Management, • CI/CD: GitHub Actions, • Reporting: PowerBI, • Documentation & collaboration: Microsoft Teams, SharePoint, Confluence, • What Success Looks Like (First 6-12 Months), • A predictable, well-governed release cadence with clear readiness criteria., • Faster restoration through a major incident playbook and trained responders., • Fewer repeat incidents due to actionable RCA/CA and KEDB adoption., • Automation of deployment and evidence capture for audit-ready releases., • Clear, proactive communications that build stakeholder confidence.

Role Overview Mercor is partnering with a frontier AI lab to support the evaluation of AI-generated videos. We are seeking detail-oriented video rating experts to assess whether visual outputs from large language models accurately reflect the prompts they were given. This project aims to enhance video generation models by ensuring visual consistency and prompt adherence. This is a short-term, remote contract opportunity. ### Key Responsibilities - Evaluate AI-generated videos for visual accuracy and prompt alignment - Identify and flag visual errors or inconsistencies - Determine whether specific prompt instructions (e.g., object, motion, or style changes) were followed correctly ### Ideal Qualifications - Based in the U.S. or Canada (required) - 1+ years of experience in video production, editing, QA, or related review work - Bachelor's degree in any field - Strong attention to visual detail and pattern recognition - Ability to interpret prompts and assess visual fidelity - Experience working with AI tools, media content, or annotation platforms is a plus - Reliable communication and self-directed work habits ### More About the Opportunity - Remote and fully asynchronous - Flexible hours with an expected commitment of ~20–40 hours/week - Short-term engagement (~2 weeks) with potential for follow-on projects ### 5\. Compensation & Contract Terms - Competitive hourly rate depending on experience and location - You’ll be classified as an independent contractor - Payments issued weekly via Stripe Connect ### 6\. Application Process - Submit your resume to get started - Candidates may be asked to complete a brief evaluation task to demonstrate visual review skills ### 7\. About Mercor - Mercor is a talent marketplace that connects top experts with leading AI labs and research organizations. - Our investors include Benchmark, General Catalyst, Adam D’Angelo, Larry Summers, and Jack Dorsey. - Thousands of professionals across domains like law, creatives, engineering, and research have joined Mercor to work on frontier projects shaping the next era of AI.

Job Description The Project Manager’s responsibilities will include successfully managing projects from start to finish by ensuring all submittals, procedures, specifications, QA documents and schedules are followed per the contract documents. They will ensure all drawings are 100% accurate prior to any drawing submittals to our customers. They will also go over all final drawings, prior to start of fabrication, to ensure that there are no errors, and that the practicality of the drawings are such as to ensure a successful build in the shop. ESSENTIAL FUNCTIONS · Strong drawing comprehension. · Examines engineering drawings of water control gates & hoists, assemblies, and fabrications to detect errors in design documents: Compares figures and lines on production drawing or diagram with production layout, examining angles, dimensions, bend allowances, and tolerances for accuracy. · Determines practicality of design, material selection, available tooling, and fabrication process, applying knowledge of drafting and manufacturing methods. · Reviews customer specifications and drawings to ensure project adherence and acceptance. · Compiles, reviews, and submits customer submittal packages as required by the projects. · Works with engineering, quality & fabrication personnel to submit and resolve RFI’s. · Confers with design personnel to resolve drawing and design discrepancies. · Specialize in checking specific types of designs, such as mechanical assemblies. · Study and review product pricing and change or modify pricing with the current trends. · Create and maintain customer and production schedules. · Be the point of contact for assigned projects with Linita’s customers. · Assist Chief Operating Officer and Plant Manager in resolving customer problems, complaints, etc. · Liaise between shop, foreman, quality department and engineering to resolve project issues. · Perform other duties as may be required by the Chief Operating Officer of Linita. · Meet Linita’s budgets and schedules as required. · Always maintain a high degree of customer satisfaction. · Prioritize purchasing based upon lead times and project schedule requirements. · Reliability and Attendance – begin work on time and conform to work hours and schedule. · Work overtime when required to meet schedules and deadlines. · Assist engineers with bidding process (pricing materials, machining, and transportation). OTHER JOB DUTIES Other duties and/or projects as assigned by a member of the Management Team. REQUIREMENTS/QUALIFICATIONS Technical Skills · Minimum of 5 years’ experience in Project Management/Detailing/Drafting in the steel fabrication industry. · Knowledge of: o Drafting practices. o Fabrication and manufacturing practices, including methods of cutting, forming, and machining. · Some proficiency in 2D Auto-cad. · Associates Degree in drafting preferred. · Strong verbal and written communication skills. · Able to use Microsoft Office Outlook, Excel, and Word. Personal Characteristics · Meticulous, methodical, high attention to detail, and extremely organized. · Goal Oriented. · Able to work in a multitasking environment of a small company and maintain self-motivation. · Positive and open-minded approach to problem solving. · Able to manage multiple projects, respond to rapid change, and organize, prioritize, and perform work with minimal supervision. · Able to work independently as well as in a team environment. EXPERIENCE Five to 10 years of experience in complex steel fabrication products required Company DescriptionLinita Design & Manufacturing specializes in the manufacturing of Water Control Equipment such Intake Gates, Bulkhead Gates, Stoplogs, Trashracks. Cranes, Hoists, etc. We are also a heavy custom fabrication shop.Linita Design & Manufacturing specializes in the manufacturing of Water Control Equipment such Intake Gates, Bulkhead Gates, Stoplogs, Trashracks. Cranes, Hoists, etc. We are also a heavy custom fabrication shop.

Travel as needed (some overnights).

Be part of our success story as a Netflix QA Tester to perform daily responsibilities with dedication.

To deliver a great customer experience while safely and efficiently maintaining a neat, clean and organized Back Room.To perform responsibilities that will ensure accurate receiving of all deliveries to protect Company assets.To perform other tasks Dance, Customer Experience, Operations, Retail, QA.

QA Analyst Remote Job Duties: • Partner with the product and engineering team to understand project objectives, gather requirements, troubleshoot issues, and implement scalable test solutions • Design

Job DescriptionDescription: Project Manager – Precast Transportation and Underground Structures Design | Civil Engineering Lead Precast Infrastructure Projects That Shape Communities Are you an experienced Civil Engineering Project Manager skilled in precast concrete design, transportation infrastructure, and underground structure projects? Fisher Associates is seeking a dynamic Project Manager to oversee precast engineering projects from initial design through completion ensuring excellence in project delivery, client service, and technical quality. At Fisher, you’ll join a collaborative, people-first culture where your leadership drives innovation, strengthens client relationships, and delivers lasting infrastructure solutions that move communities forward. Apply today to lead meaningful projects and bring innovative transportation solutions to life. About Fisher Associates Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Collaborate with internal teams, clients, subconsultants and agencies to ensure seamless project delivery., • Successfully lead projects from initial setup, design, planning, safety analysis, and project kick-off., • Create accurate drawings, plans, and specifications for precast projects aligned with industry design standards., • Manage project budgets, scope, schedule, and staffing to stay on plan., • Oversee project billing, client updates, QA/QC of deliverables, and project closeout., • Lead transportation and underground structures precast design projects, ensuring compliance with industry, regulation, and safety standards., • Support the preparation of project proposals by collaborating with senior staff and technical teams., • Coordinate with design teams to develop detailed plans, specifications, drawings and bid packages., • Perform technical reviews and provide guidance to resolve design challenges., • Manage a project team, fostering a collaborative and productive work environment., • Assign tasks, monitor progress, and provide guidance to ensure project milestones are met. Your Impact Matters, Your Career Thrives. Work on engaging precast engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Precast Project Manager • B.S. degree in Civil Engineering, Master’s preferred, • 8+ years’ experience in precast concrete design engineering for transportation infrastructure and underground structures (utility vaults, manholes, drainage structures and pump stations)., • Precast project management experience, • Professional Engineering License (PE) preferred or ability to obtain it, • Familiarity with ACI 318, ACI 350, ASCE-7 and AASHTO codes, • Familiarity with IBC codes a plus, • Proficiency in AutoCAD & RISA 3D, • Proven Client relationship and business development experience, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines., • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions