Shipyard repair jobs in San Diego, CaliforniaCreate job alerts

Job Description Location: San Diego, CA, US Company: Standard Ship Repair Level of Experience: Any Level Reports to: Foreman Salary Status: Hourly - Non-Exempt Summary/Objective: Structural Fitters fabricate and join metal plates and shapes, and layout from installation from prints, diagrams, work orders, and/or verbal instructions using hand and powered hand tools, and welding equipment. They must be familiar with OSHA requirements for safety and hot work onboard naval vessels. Duties include, but are not limited to: • Successfully completion of welding qualification requirements using Shielded Metal Arc Welding (SMAW) and Flux-Cored Arc Welding (FCAW) processes., • Setup and adjust various welding equipment and associated accessories., • Ability to interpret and fabricate components using prints, written and/or verbal directions in a shop environment., • Accomplish removals, preparation, and installation of new materials onboard naval vessels. Education / Experience Required: • Must be 18 years old., • High School Diploma or equivalent., • Completed a structured welding program., • Must have a valid California driver's license., • A plus, previous experience in a ship repair environment. Work Environment: This job operates in a shipyard work environment. Travel: This position does require ability to travel. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be available to work at heights, confined spaces and have ability to climb staircases and ladders of varying sizes. May involve carrying objects that weigh up to 50 lbs., frequent stooping, bending, crawling, reaching, and walking. Work Authorization/Security Clearance (if applicable) • Completion of a satisfactory background check, • Passing a drug test and physical examination, • Eligibility to work in the US., • Obtaining DBIDS level security clearance. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. AAP/EEO Statement Standard Ship Repair is an Equal Opportunity Employer: minority/female/disability/veteran/sexual orientation, encouraging diversity in the workplace and a drug-free workplace. Completion of a satisfactory background check. Must pass a drug test and physical examination.

Job Description Location: San Diego, CA, US Company: Standard Inspection Services Level of Experience: Any Level Reports to: Foreman Summary/Objective: Pipe Welders II join pipes. valves and fitting components as specified by layout, prints, diagrams, work orders, or verbal instructions, using hand and powered hand tools, and welding equipment. They must be familiar with OSHA requirements for safety and hot work onboard naval vessels. Duties include, but are not limited to: • Successfully completion pipe welding qualification requirements using Shielded Metal Arc Welding (SMAW) and Gas Tungsten Arc Welding (GTAW) in the restricted 6G position on ferrous and nonferrous materials., • Setup and adjust various welding equipment and associated accessories., • Ability to interpret welding symbols-based on the AWS Welding Symbols., • Familiarity with the workmanship requirements of the following:, • MIL-STD-22, Welded Joint Design,, • S9074-AR-GIB-010_278, Requirements for Fabrication Welding and Inspection, and Casting Inspection and Repair for Machinery, Piping, and Pressure Vessels, • MIL-STD-1689A, Fabrication, Welding, and Inspection of Ships Structure. Education / Experience Required: • Must be 18 years old., • High School Diploma or equivalent., • Completed a structured welding program., • Must have a valid California driver's license., • A plus, previous experience in a ship repair environment., • Understand the Naval Ship Repair requirements and working environment. Work Environment: This job operates in a shipyard work environment. Travel: This position does require ability to travel. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be available to work at heights, confined spaces and have ability to climb staircases and ladders of varying sizes. May involve carrying objects that weigh up to 50 lbs., frequent stooping, bending, crawling, reaching, and walking. Work Authorization/Security Clearance (if applicable) • Eligibility to work in the US., • Obtaining DBIDS level security clearance. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. AAP/EEO Statement Standard Inspection Services is an Equal Opportunity Employer: minority/female/disability/veteran/sexual orientation, encouraging diversity in the workplace and a drug-free workplace. Completion of a satisfactory background check. Must pass a drug test and physical examination.

Job Description Company Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is an industry leader, providing engineering and industrial services to the U.S. Navy, U.S. Coast Guard, Military Sealift Command, and other DoD organizations. At Continental Tide, we understand that a great company culture is one where employees know their voice is heard, no matter what their title is, and letting them grow in their role as the company does. We want to provide our employees with the opportunity to learn, be challenged and be in a position where they can succeed, develop new skills, and do things they wouldn't have the opportunity to do elsewhere. In our fast-paced and challenging environment, employees here at Continental Tide can catapult themselves to the top and we're looking for 'the best at what they do' to join our team and help us grow. NDT Inspector II Purpose: • The Level II NDT Tech will play a critical role in ensuring compliance with customer and government contractual requirements related to NDT by preparing, maintaining, and reviewing procurement and contractual documents. Interface with customer representatives for relevant quality/technical issues. This includes Statements of Work, Specifications, Quality Plans, and other relevant documentation. The ideal candidate will possess a deep understanding of NDT processes and standards related to working knowledge of NAVSEA Standard Items and shipboard QA inspections, coupled with strong attention to detail. A history of performing shipboard surveillances of structural, piping, ventilation, electrical installation, and generating Quality Assurance reports. You will evaluate, record, and maintain the history of quality metrics. Analysis of quality data using statistical methods to drive process and design improvements. Interface with customer representatives for relevant quality/technical issues. You will collaborate closely with internal teams and external stakeholders to ensure that all NDT activities meet the highest standards of quality and compliance. Qualifications: • High school Diploma or equivalent in Vocational and US military schools., • Must have an ASNT NDT Certification with a nondestructive testing background., • Five (5) to Ten (10) years of experience as an NDT QA Inspector., • Certifications: PLC, WAF, VT II and PT II, • Prior experience in performing Quality Assurance support tasks associated with mechanical and structural/piping/electrical repair and upgrades and installation of electronic systems on US Navy Ships., • Previous hands-on experience with shipboard electrical/structural installation including Cable, Connectors, power Modifications, and structural modification. Must be able to read and understand Ship Installation Drawings., • Experience with JFMM, 9090-310, NAVSEA Standard Items, NAVSSES 4790.2 Series Installation documentation, WAF/TUMS., • Understanding of shipboard/shipyard environment is a must., • Five (5) years of experience with US NAVY ships Structural, Mechanical & Electrical (HM&E) systems and equipment including shipboard electric, power generation and transmission equipment., • Experience in Programmable Logic Controllers (PLCs), cableway, fiber optics, integrated network systems., • Proficiency in Microsoft Office is a mandatory requirement., • Must have experience in evaluation of subcontractors and vendors assessing they meet quality assurance requirements., • Occasional Travel- less than 10%, • Performs physical inspections and writes procedures/standards for Quality Control., • Remaining in a stationary position, often standing, or sitting for prolonged periods., • Moving about accomplishing tasks or moving from one worksite to another., • Light work that includes moving objects up to 20 pounds. Benefits: Benefits: Continental Tide offers an empowering professional environment in a culture that stresses teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Continental Tides Defense Systems, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. See all of our latest opportunities at or follow us on our LinkedIn page at . To be considered you must apply by going to . Please note: The salary range referenced is a general guideline. Continental Tide considers factors such as (but not limited to) the following when determining base pay: scope and responsibilities of the position, candidate’s related work experience, education/training/certifications, key skills, internal peer equity/external market competitiveness, as well as other business considerations.

Job Description Labor One is hiring Journey-Level Pipe Welders for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: -This position is responsible for welding pipe of various metals on a ship or in a shop to support mechanical repairs and modernization of marine vessels including US Naval, Military Sealift Command, and commercial ships. The journeyman welder is also responsible for providing direction to assigned helpers. -The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE: 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information such as conditions found by writing condition reports that include recommended corrective action., 5. Must have a thorough knowledge of SMAW, FCAW, and GMAW theory., 6. Must be able to certify in P-3 joint with permanent backing ring, and P-14 socket weld joint:, 7. SMAW, 8. GTAW, 9. FCAW OR, 10. Silver Brazing, 11. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals., 12. Must possess a working knowledge of equipment and work processes used in marine pipe welding., 13. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 14. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 15. Must have four (4) years of pipe welding experience. DUTIES AND RESPONSIBILITIES: 1. Provide direction to a pipe welding helper, if assigned, as needed to complete the assigned tasks., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and pipe shop supervisor., 3. Work shifts and overtime as assigned., 4. Be accountable for completion of daily work assignments., 5. Comply with OSHA standards and the shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Ensure the work site is ready for hot work before commencing hot work. Communicate with the Fire Watch and provide direction as necessary., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 10. Confer with the supervisor to resolve unexpected events related to your assigned task. Carry out written or oral instructions. Work Tasks Include: a. Inspect and prepare the area for hot work, including gas free certifications and tag-outs, before commencing any hot work. b. Prepares work area for production welding by inspecting joints and cleaning as required. c. Inspect welds for defects. Confer with supervision before correcting deficiencies. d. Document existing conditions using Condition Found Reports. e. Ensure gas free certifications are accurate and up to date. f. Assist with Lock-out Tag-out for work being performed. WORK ENVIRONMENT: -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: -The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. -While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. -The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift only 40 hours a week / OT with approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Lead Marine San Diego, CA, USA Full Time $28.00 to $38.00/hr Open to all shifts :1stShift (6:00am-2:30pm), 2ndShift (3:00pm-11:30pm) Lead Marine has immediate openings for Journeymen Pipe Welders for the Shipyard Industry here in San Diego. This Welding job will be working on Naval Bases & Shipyards from 6:00am to 2:30pm and overtime as needed. DBIDs badge in hand is a plus. Must have 5 years of navy repair/marine welding experience. Pay is dependent on skills and capability. Qualified candidates please apply now! Responsibilities: • Must be able to read and comprehend basic instructions, drawings, and general correspondence in English., • Must have a thorough knowledge of SMAW, FCAW, GMAW, and GTAW theory., • Must be able to certify in multiple welding qualifications., • Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals., • Must possess a working knowledge of equipment and work processes used in marine pipe welding., • Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., • Must have five(5) years of pipe welding experience., • Must comply with OSHA & NAVSEA standards, • Structural welders must have at least 5 years of pipe welding experience, • Must have own hood, leathers, and hand tools., • Structural welders must be able to read and interpret welding symbols, prints, drawings, and prints., • Copper Nickel Brazing, • SMAW (Shielded Metal Arc Welding) process in 2G, 3G, & 4G positions, • FCAW (Flux Core Arc Welding) process in 2G, 3G, & 4G positions, • GMAW (Gas Metal Arc Welding) process, • Air Carbon Arc Gouging proficiency test Benefits: • Health insurance, • Paid holidays, • Paid sick leave To see a list of more available jobs, please visit About LEAD Staffing Lead Staffing, established in 2010, specializes in Construction, Industrial and Marine Staffing of Skilled Tradespeople throughout the United States of America. Our goal is to work with regional and national contractors that share our commitment towards safety and to provide long term rewarding work assignments for our valued employees. LEAD is proud to be an Equal Opportunity and Affirmative Action Employer. LEAD is committed to providing an environment of mutual respect where employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy (including childbirth, lactation and related medical conditions), national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information (including characteristics and testing), military and veteran status, and any other characteristic protected by applicable law. We believe that diversity and inclusion among our teammates is critical to our success as a growing national company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool. Company DescriptionOur mission is to be the Best In Class manpower support company by operating on the principals of delivering the highest level professionalism, integrity, honesty, and safety to our valued employees and clients. Lead Staffing, established in 2010, specializes in Construction, Industrial and Marine Staffing of Skilled Tradespeople throughout the United States of America. Our goal is to work with regional and national contractors that share our commitment towards safety and to provide long term rewarding work assignments for our valued employees. Our success in consistently filling our customer's orders is directly related to the tenure of our sales and recruiting staff, all of whom on average have in excess of 10 years industry experience. LEAD is proud to be an Equal Opportunity and Affirmative Action Employer. LEAD is committed to providing an environment of mutual respect where employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy (including childbirth, lactation and related medical conditions), national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information (including characteristics and testing), military and veteran status, and any other characteristic protected by applicable law. We believe that diversity and inclusion among our teammates is critical to our success as a growing national company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool.Our mission is to be the Best In Class manpower support company by operating on the principals of delivering the highest level professionalism, integrity, honesty, and safety to our valued employees and clients.\r\n\r\nLead Staffing, established in 2010, specializes in Construction, Industrial and Marine Staffing of Skilled Tradespeople throughout the United States of America. Our goal is to work with regional and national contractors that share our commitment towards safety and to provide long term rewarding work assignments for our valued employees.\r\n\r\nOur success in consistently filling our customer's orders is directly related to the tenure of our sales and recruiting staff, all of whom on average have in excess of 10 years industry experience.\r\n\r\nLEAD is proud to be an Equal Opportunity and Affirmative Action Employer. \r\n\r\nLEAD is committed to providing an environment of mutual respect where employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy (including childbirth, lactation and related medical conditions), national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information (including characteristics and testing), military and veteran status, and any other characteristic protected by applicable law. We believe that diversity and inclusion among our teammates is critical to our success as a growing national company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool.

Job Description Labor One is hiring Shipfitter Helpers for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description:This position is responsible for assisting with steel and aluminum structural work in all stages of repair and modernization of marine vessels including US Naval Vessels, Military Sealift Command, and commercial ships and barges while under the supervision of a supervisor and/or journeyman / 1st Class shipfitter. The position requires a basic understanding of structural repair procedures and a strong aptitude and ability to follow directions. The individual must possess knowledge of ship terminology, measurements, and the ability to read job specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Ability to comprehend instructions and general correspondence., 2. Working understanding of ship repair terminology and ship compartment location nomenclature., 3. Be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Ability to effectively communicate issues encountered during the job that are in conflict with the directions provided by the supervisor or journeyman / 1st class fitter., 5. Ability to read and interpret structural drawings, including weld symbols., 6. Basic understanding of hand and power tools used by shipfitters including but not limited to mauls, grinders, circular and reciprocating saws, and hand and magnetic drill., 7. Ability to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system., 8. Up to one (1) year of experience in a heavy industry. DUTIES AND RESPONSIBILITIES 1. Must comply with OSHA standards and shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor., 3. Work shifts and overtime as assigned., 4. Keeping the work area clean and safe at all times, especially at the end of the shift., 5. Understand relevant work processes, operation of equipment, before commencing work., 6. Complete daily work assignments and provide status of unfinished work to the journeyman or supervisor., 7. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment. 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 8. Respond to visual, verbal, and audible sounds/commands., 9. Work at heights above 12' from ladders, scaffolding, and manlifts., 10. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 11. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 12. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 1st Shift 40 Hrs per Week OT per hiring Managers approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job DescriptionLabor One is hiring Facilities Mechanic Journeyperson for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description:Must be able to work unsupervised on a daily basis maintaining, trouble shooting and repairing mechanical, piping and electrical systems, share weekend watch responsibilities, and work up to 30 hours when necessary for dry-docking evolutions. Other job duties include: Work under direction of Dockmaster. Supervise and schedule tasks and work items for other dock mechanics to complete. Operation of POSD/POCA control console. Operation of POSD/POCA trolley systems, capstans, anchor windlass. Operation of switchboards, motor controllers, and other control and automation systems. Qualified line handler. Welding and gas burning. Maintain preventative and corrective maintenance files on POSD/POCA. Operate diesel generators and paralleling switchboards on POSD/POCA. Support yard trades with ships in POSD/POCA as needed. Operate forklifts and aerial lifts. Inspect, service, and maintain POSD/POCA mooring grippers. Possess and maintain all appropriate shipyard safety and environmental certifications. Hook up and disconnect dock and ships temporary services in POSD/POCA. Assist Dockmaster in creating docking and undocking schedules for POSD/POCA. Knowledge of safe rigging practices. Interpret blueprints, schematic drawings, and dock layouts. General understanding of marine terminology. Possess computer skills in Microsoft Office. Minimum of 5 years related experience within ship yard repair and or Navy vessels. 1st shift 40 hours a week / OT on approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description ship repair company now hiring MARINE electricians. This is a full-time job opening for the qualified applicant. The ideal candidate has served in the Navy, Coast Guard, Merchant Marine or Military Sea-lift Command as an electrician. Prior service is a plus but not an absolute requirement. Qualifications and other job requirements include the following: • A minimum of 5 years practical, hands-on experience in a shipyard or other marine repair company is preferred. Successful service in the military (E6 and above) as an electrician also qualifies., • Has a proven ability to read and interpret blueprints and SWRMC work specs., • Connect wires to circuit breakers, transformers, or other components., • Diagnose malfunctioning systems, apparatus, or components, using test equipment and hand tools to locate the cause of a breakdown and correct the problem., • Inspect electrical systems, equipment, or components to identify hazards, defects, or the need for adjustment or repair, and to ensure compliance with codes., • Prepare sketches or follow blueprints to determine the location of wiring or equipment and to ensure conformance to safety requirements for shipboard use., • Fasten electrical switches or outlets., • Plan layout and installation of electrical wiring, equipment, or fixtures, based on job specifications., • Route cables through in a shipboard environment using existing or newly place wire-ways. Place conduit, pipes, or tubing, inside designated partitions, walls, or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes., • Perform physically demanding tasks, such as lifting heavy objects., • Install ground leads and connect power cables to equipment, such as motors., • Advise management on whether continued operation of equipment could be hazardous., • Direct or train workers to install, maintain, or repair electrical wiring, equipment, or fixtures., • Provide preliminary sketches or cost estimates for materials or services., • Repair or replace wiring, equipment, or fixtures, using hand tools or power tools., • Test electrical systems or continuity of circuits in electrical wiring, equipment, or fixtures, using testing devices, such as ohmmeters, voltmeters, or oscilloscopes, to ensure compatibility and safety of system., • Work from ladders, scaffolds, to install, maintain, or repair electrical wiring, equipment, or fixtures., • Assemble, install, test, or maintain electrical or electronic wiring, equipment, appliances, apparatus, or fixtures, using hand tools or power tools.

Job Description Marine Electricians (San Diego, CA) Lead Marine San Diego San Diego, CA, USA Full Time $27.00 to $40.00/hour 1st Shift – 6:00am – 2:30pm & 2nd Shift - 3:00pm - 11:00pm Lead Marine has immediate openings for 1st Class Marine Electricians in the San Diego Naval Shipyard Industry. Must have navy repair/marine electrical or prior military electrical experience. Must be DBIDs Badge eligible to gain access to Naval Bases. Responsibilities: • Understand basic Electrical and Electronic fundamentals., • Understand shipboard electrical systems to include both 115- and 450-volt ungrounded systems, • Can perform connect and disconnect of electrical gear to include pumps, motors, and controllers., • Be capable of Preventative Maintenance Requirements (PMS) on 3000 Series MIPS for shipboard systems., • Accomplish inspections and assessment of electrical equipment to include inspections of damaged or deranged electrical systems., • Open, pack and close MCT., • Accomplish all facility electrical repairs to include install conduit, electrical boxes jay boxes, light switches light fixtures, circuit breakers, wrong wire, repair controllers as needed., • Trouble shoot fundamental electrical components in support of AC /heating and ventilation systems repair., • Familiar with NAVSEA STD Items 009-22, 009-23 and 009-73, • Accomplish electrical hook-up IAW disconnect sheets/drawings, • Ability to read isometric wiring, block and cable routing drawings, • Accomplish lay-out of electrical equipment, • Able to fill out CFR, • Accomplish banding of cableways, packing MCT’s and stuffing tubes., • Familiar with WAF/Tag-out procedures, • Familiar with electrical test equipment Benefits: • Health insurance, • Paid holidays, • Paid sick leave To see a list of more available jobs, please visit Company DescriptionOur mission is to be the Best In Class manpower support company by operating on the principals of delivering the highest level professionalism, integrity, honesty, and safety to our valued employees and clients. Lead Staffing, established in 2010, specializes in Construction, Industrial and Marine Staffing of Skilled Tradespeople throughout the United States of America. Our goal is to work with regional and national contractors that share our commitment towards safety and to provide long term rewarding work assignments for our valued employees. Our success in consistently filling our customer's orders is directly related to the tenure of our sales and recruiting staff, all of whom on average have in excess of 10 years industry experience. LEAD is proud to be an Equal Opportunity and Affirmative Action Employer. LEAD is committed to providing an environment of mutual respect where employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy (including childbirth, lactation and related medical conditions), national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information (including characteristics and testing), military and veteran status, and any other characteristic protected by applicable law. We believe that diversity and inclusion among our teammates is critical to our success as a growing national company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool.Our mission is to be the Best In Class manpower support company by operating on the principals of delivering the highest level professionalism, integrity, honesty, and safety to our valued employees and clients.\r\n\r\nLead Staffing, established in 2010, specializes in Construction, Industrial and Marine Staffing of Skilled Tradespeople throughout the United States of America. Our goal is to work with regional and national contractors that share our commitment towards safety and to provide long term rewarding work assignments for our valued employees.\r\n\r\nOur success in consistently filling our customer's orders is directly related to the tenure of our sales and recruiting staff, all of whom on average have in excess of 10 years industry experience.\r\n\r\nLEAD is proud to be an Equal Opportunity and Affirmative Action Employer. \r\n\r\nLEAD is committed to providing an environment of mutual respect where employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy (including childbirth, lactation and related medical conditions), national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information (including characteristics and testing), military and veteran status, and any other characteristic protected by applicable law. We believe that diversity and inclusion among our teammates is critical to our success as a growing national company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool.

Job DescriptionMarine Electrician (Repair) - Career Opportunity - San Diego, CA Job Description • Prepare work areas, drill holes, and grind metal surfaces., • Install welds and hook up equipment., • Lay out, pull, rip out, repair, and install cable and conduit., • Test electrical equipment., • Read composite blueprints, computer printouts, and Navy standards manual., • Remove scrap and perform general cleanup., • Complete 6-10 hook ups a day., • Knowledge of electrical, mechanical, and shipbuilding practices., • Ability to use power and hand tools., • Ability to read composite blueprints, computer printouts, and Navy standards manuals., • Two years marine electrical experience and/or four years electrical experience., • Ability to work at heights and in confined spaces., • Availability to work 1st and 2nd shifts (6:30am - 3:00pm and/or 2:30pm - 11:00pm). The pay range for this position is $25.00 - $40.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in San Diego,CA. Application Deadline This position is anticipated to close on Sep 26, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Job Summary Installs, repairs and hooks up equipment for all electrical services on the ship. Lays out, pulls, lifts out and installs cable and conduit. Prepares work area, drills holes and grinds metal surfaces, and welds mounting equipment. Tests electrical equipment. Performs other related tasks as assigned, some of which may become essential to the position. Qualification Standards Must have knowledge of electrical, mechanical, and shipbuilding practices. Ability to use power and hand tools and read composite blueprints, computer printouts, and Navy standards manuals are required. Must pass NASSCO assessment. Must have two years marine electrical experience and/or four years electrical experience. Must be able to work at heights and in confined spaces and to access and move around the ship safely. Essential Job Tasks • Prepare work areas, drill holes and grind metal surfaces, • Install welds and hook up equipment, • Lay out, pull, rip out, repair and install cable and conduit, • Test electrical equipment, • Read composite blueprints, computer printouts and Navy standards manual, • Removes scrap and performs general clean up, • Other tasks as may be assigned relevant to the trade Assesment Criteria: The electrical assessment entails a knowledge assessment as well as a practical assessment. Throughout the assessment, the candidate must follow all safety procedures and requirements. Deviation from these requirements will result in disqualification. Materials, Tools Equipment, Work Aids Measuring equipment, hammers, drills, grinder, welding equipment, hand tools, cable cutters, electrical tape, screwdrivers, electrical test equipment, blueprints, and Navy standards manual, and cleaning equipment. Personal protective equipment required. Physical/Mental Involvement Frequent lifting, carrying, pulling and pushing cable and equipment to rip out or install. Frequent standing, balancing, walking, climbing ladders or equipment, reaching above shoulder or out in front, manual dexterity, pushing, pulling, kneeling, bending, seeing in full colors, hearing and occasionally lowering self into confined spaces, crawling through small openings and working in reclined positions, as needed. Works in all areas of the shipyard and on board ships. Hearing warning signals and reading and comprehending safety instructions. Must be able to maintain general safety awareness and avoid hazards commonly present in employee’s work area. Marginal Job Tasks

Job Description Structural Welders (San Diego, CA) Lead Marine San Diego, CA, USA Full Time $27.00 to $35.00 Open to all shifts :1st Shift (6:00am-2:30pm), 2nd Shift (3:00pm-11:30pm) Lead Marine has immediate openings for Journeymen Structural Welders for the Shipyard Industry here in San Diego. This Welding job will be working on Naval Bases & Shipyards from 6:00am to 2:30pm and overtime as needed. DBIDs badge in hand is a plus. Must have 5 years of navy repair/marine welding experience. Pay is dependent on skills and capability. Qualified candidates please apply now! Responsibilities: • Multi-pass. All position fillet and butt welds using the following processes: SMAW, GMAW, and FCAW, • Heating - Oxygen/Propane Heating Torch., • Experience working in a physically demanding environment (shipboard, sub-assemblies, ladders, staging, etc.)., • Familiarity with OSHA regulations relative to the shipbuilding industry., • Air Carbon Arc Gouging., • Ability to properly use fillet and butt weld gauges · Must comply with OSHA & NAVSEA standards • Structural welders must have at least 5 years of structural welding experience, • Must have own hood, leathers, and hand tools., • Structural welders must be able to read and interpret welding symbols, prints, drawings, and prints., • SMAW (Shielded Metal Arc Welding) process in 2G, 3G, & 4G positions, • FCAW (Flux Core Arc Welding) process in 2G, 3G, & 4G positions, • GMAW (Gas Metal Arc Welding) process, • Air Carbon Arc Gouging proficiency test Benefits: • Health insurance, • Paid holidays, • Paid sick leave To see a list of more available jobs, please visit Company DescriptionOur mission is to be the Best In Class manpower support company by operating on the principals of delivering the highest level professionalism, integrity, honesty, and safety to our valued employees and clients. Lead Staffing, established in 2010, specializes in Construction, Industrial and Marine Staffing of Skilled Tradespeople throughout the United States of America. Our goal is to work with regional and national contractors that share our commitment towards safety and to provide long term rewarding work assignments for our valued employees. Our success in consistently filling our customer's orders is directly related to the tenure of our sales and recruiting staff, all of whom on average have in excess of 10 years industry experience. LEAD is proud to be an Equal Opportunity and Affirmative Action Employer. LEAD is committed to providing an environment of mutual respect where employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy (including childbirth, lactation and related medical conditions), national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information (including characteristics and testing), military and veteran status, and any other characteristic protected by applicable law. We believe that diversity and inclusion among our teammates is critical to our success as a growing national company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool.Our mission is to be the Best In Class manpower support company by operating on the principals of delivering the highest level professionalism, integrity, honesty, and safety to our valued employees and clients.\r\n\r\nLead Staffing, established in 2010, specializes in Construction, Industrial and Marine Staffing of Skilled Tradespeople throughout the United States of America. Our goal is to work with regional and national contractors that share our commitment towards safety and to provide long term rewarding work assignments for our valued employees.\r\n\r\nOur success in consistently filling our customer's orders is directly related to the tenure of our sales and recruiting staff, all of whom on average have in excess of 10 years industry experience.\r\n\r\nLEAD is proud to be an Equal Opportunity and Affirmative Action Employer. \r\n\r\nLEAD is committed to providing an environment of mutual respect where employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy (including childbirth, lactation and related medical conditions), national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information (including characteristics and testing), military and veteran status, and any other characteristic protected by applicable law. We believe that diversity and inclusion among our teammates is critical to our success as a growing national company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool.

Job Description CTR Group is currently seeking Outside Machinists for a Shipyard in the San Diego, CA. Transitioning or former Navy members and current Reservists are also encouraged to apply for these positions. Seeking local personnel. 30 Positions Available! Pay Range: $28-50/hour plus benefits RESPONSIBILITIES: · Capable of accomplishing the installation, maintenance, and repair of ship's propulsion and auxiliary systems including, but not limited to Steam, Gas Turbine, and Diesel propulsion systems, rudders and steering gear, elevators, and deck equipment without Supervision · Capable of accomplishing the installation repair, and maintenance of ship's fluid systems which include pumps, compressors, purifiers, heat exchangers, actuators and valves without Supervision · Analyze defects and adjusts or repairs electrical mechanical systems of outboard motors REQUIREMENTS: · Must be 18 years of age or older to apply · This position may require access to U.S. government or military sites · As such, candidates must be eligible to obtain base access clearance, which includes passing a background check and presenting valid government-issued identification. Must be DBIDS-eligible. Veterans are strongly encouraged to apply. CTR Group has been a leader in its industry for over 30 years and is rated highly on Google, Indeed and Facebook for being a great company to work for. If you enjoy being a part of a great team, apply today and check out our website for more information. CTR Group is an equal employment opportunity employer. Candidates are selected based on qualifications and defined requirements of the job, not on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin or any other protected status. Further, CTR Group encourages United States' Veterans and persons with disabilities to apply for positions for which they are qualified. Company DescriptionCTR group is a full-service employment & recruiting firm, matching the strengths and skills of thousands of candidates with employers. group is a full-service employment & recruiting firm, matching the strengths and skills of thousands of candidates with employers.

Job Description Job Posting End Date: Untill filled Shift: 3rd (3AM - 11AM) Security Clearance: No Clearance 1 opening SKILLS AND QUALIFICATIONS • Minimum two (2) years of shipyard experience and possess the following certifications:, • Current Shipyard Competent Person Certificate, • OSHA 10 Hour 1915 Maritime Safety Certificate, • DBIDS, • Must have basic knowledge of technical principles, theories and concepts in the field and their practical applications to problems and situations ordinarily encountered including:, • Applicable Federal and State OSHA regulations;, • Applicable NFPA standards;, • Techniques used to recognize health and safety hazards;, • Working with hazardous materials;, • Ship configuration;, • Shipyard operations;, • Safe operation of tools and machinery;, • Use of computer software programs (MS Office, iOS applications), • Ability to provide solutions to routine technical problems, • Must be able to pass pre-employment drug screening and background check, • Safety sensitive position will require random drug and alcohol testing, • Must be able to obtain access to Department of Defense sites (DBIDS), • Ability to communicate effectively, in both oral and written applications in order to successfully interact with safety representatives, management and employees While performing the duties of this position, the employee must be able to work at heights and in confining or restricted spaces aboard vessels under construction/repair. Daily inspections require climbing ladders, working at heights, walking on scaffolding, observing use of tools and operation of equipment/machinery. Physical dexterity must allow for bending, reaching, climbing, crawling, and working on ladders and scaffolding. Must be physically able to walk to all yard locations. Must be able to handle stressful situations. Must be able to lift up to 50 pounds of weight. Visual abilities required include close, distance and peripheral vision, depth perception and color recognition. While performing the duties of this job, the employee is occasionally exposed to vapors, gases, dust, welding/burning fumes, and smoke. Must be able to spend up to 70% of time in an outdoor shipyard environment in all climates.

Job Description Location: San Diego, CA, US Company: Standard Ship Repair Additional Locations: Bremerton, WA, US Level of Experience: Experienced Reports to: General Manager Salary Status: Hourly / Non-Exempt Summary/Objective: A shipyard industrial hygienist job focuses on protecting workers from occupational health hazards in a maritime environment. This role involves identifying, assessing, and controlling risks associated with chemicals, physical agents (like noise and heat), and ergonomic issues. They conduct workplace assessments, collect samples, develop control measures, and provide training to ensure compliance with health and safety regulations. Duties include, but are not limited to: • Identify potential health hazards in the shipyard environment, including chemical exposures, physical agents like noise and vibration, and ergonomic factors., • Conduct independent worksite inspections for hazardous materials such as asbestos, lead and other substances in various shipyard settings., • Provide industrial hygiene expertise, surveys, and investigations to identify, evaluate, and control hazards affecting shipyard employees., • Conduct atmospheric testing for flammable, toxic, and oxygen-deficient or enriched atmospheres on confined spaces., • Develop and implement sampling plans for hazardous materials., • Analyze and interpret hazardous material sampling data., • Prepare and deliver reports on hazardous materials findings and recommendations., • Stay up to date on the latest hazardous materials regulations and bast practices. Education / Experience Required: • Demonstrated expertise within applicable trade with 1 to 2 years of relevant experience., • Understand the Naval Ship Repair requirements and working environment., • Experience utilizing industrial hygiene concepts and practices in ship repair and related industrial activities., • Experience recognizing and evaluating health hazards and implementing health hazard controls, • Experience administering occupational safety and health programs and performing industrial hygiene duties such as lead and asbestos sampling., • Proficiency in standard office computer software., • Must be able to work in the US. Position Type/Expected Hours of Work: This is a full-time position requires 40+ hours of work per week. M-F 0600 - 1430 (or as otherwise assigned by General Manager) with pre-scheduled overtime as needed. Work Environment: This job operates in an office environment and shipyard work environment. Travel: This position may require ability to travel. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be available to work at heights, confined spaces and have the ability to climb staircases and ladders of varying sizes. May involve carrying objects that weigh up to 50 lbs., frequent stooping, bending, crawling, reaching, and walking. Work Authorization/Security Clearance (if applicable) • Completion of a satisfactory background check, • Passing a drug test and physical examination, • Eligibility to work in the US. AAP/EEO Statement: Standard Inspection Services is an Equal Opportunity Employer: minority/female/disability/veteran/sexual orientation, encouraging diversity in the workplace and a drug-free workplace. Completion of a satisfactory background check. Must pass a drug test and physical examination.

Job Description Job Description SOUTH BAY SANDBLASTING & TANK CLEANING, INC. located in San Diego, CA shipyard related subcontractor looking to hire an Outside Machinist. Job Summary Support tank cleaning and flushing operations onboard Navy ships by performing mechanical disassembly, assembly, and adjustment of piping systems and related equipment. Duties include opening/closing systems, removing and reinstalling valves, fittings, and pumps, aligning equipment, performing leak checks, and assisting with line-ups for flushing operations. Work requires use of hand tools and measuring devices, following technical manuals and blueprints, and complying with all Health, Safety, and Environmental policies and procedures. Requirement • Knowledge of methods and standards of the machinist trade, • Strong understanding and interpretation of blueprints, sketches, or other description of parts to be fabricated, • Train, instruct, and supervise the workforce so that each employee puts in their best effort while increasing efficiency, productivity, and output of excellent work product., • Strong leadership and customer service skills., • Shipyard/industrial skills preferred. Familiar with Navy Ships configuration, • Knowledge of supervisory techniques, personnel policies, and procedures, • Familiar with Wafs and Tag Out process., • Must be able to perform according to both commercial and military standards and specifications, • Demonstrate excellent verbal and written communication skills. Qualifications: • 2+ years or more of experience, • Demonstrate knowledge and utilization of production quality processes, methods, technology, and equipment., • Self- motivated, proactive with strong interpersonal skills and good oral and written communication skills, ability to write reports and conduct small briefings for workers under their command, • Possess knowledge in Navy Ship Repair workload departments such as: Tank Cleaning and Technical Flush. Other areas of Naval Ships expertise will be considered. Education Requirements: • High school diploma Working Conditions and Physical Demands: Work is conducted indoors and outdoors frequently exposed to prevailing weather conditions. Work indoor or aboard vessel which may have fumes, chemicals, and heat as well as noise and dust present depending upon the location of work. Safety equipment required; some will be provided. The individual must be able to frequently climb inclined stairways vertically. Work aboard the vessels can be strenuous and sometimes hazardous. Dynamic, fast-paced outdoor setting with moderate to loud noise levels from production activity in the shipyard. Must be able to stand and walk for long periods of time. Must be flexible to work varying schedules and hours as needed. The physical demands described above are representative of those that may be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Other requirements: All positions require a pre-employment medical test. This employer participates in E-Verify. Must be able to qualify for DBIDS security clearance. Ability to read technical English is a must. U.S. Citizenship is preferred (for some work locations it is required). Must be authorized to work in the U.S. To respond to this ad, you: Please respond to this ad on our website: Women, veterans, and their spouses are encouraged to apply. We are an Equal Opportunity Employer. EEO/AA M/F D/V Job Type: Full-time Job Posted by ApplicantPro

Job Description Labor One is hiring Journey-Level Specialty Welders (Alum, CuNi, Stainless; TIG) for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for welding pipe of various metals on a ship or in a shop to support mechanical repairs and modernization of marine vessels including US Naval, Military Sealift Command, and commercial ships. The journeyman welder is also responsible for providing direction to assigned helpers. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information such as conditions found by writing condition reports that include recommended corrective action., 5. Must have a thorough knowledge of SMAW, FCAW, and GMAW theory., 6. Must be able to certify in P-3 joint with permanent backing ring, and P-14 socket weld joint:, 7. SMAW, 8. GTAW, 9. FCAW OR, 10. Silver Brazing, 11. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals., 12. Must possess a working knowledge of equipment and work processes used in marine pipe welding., 13. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 14. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 15. Must have four (4) years of pipe welding experience. DUTIES AND RESPONSIBILITIES 1. Provide direction to a pipe welding helper, if assigned, as needed to complete the assigned tasks., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and pipe shop supervisor., 3. Work shifts and overtime as assigned., 4. Be accountable for completion of daily work assignments., 5. Comply with OSHA standards and the shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Ensure the work site is ready for hot work before commencing hot work. Communicate with the Fire Watch and provide direction as necessary., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 1st shift 40 hours per week/OT per HM approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Location: San Diego, CA Company: Standard Ship Repair Additional Locations: Bremerton, WA, US Level of Experience: Level 2 Reports to: Quality Assurance Supervisor/Manager Salary Status: Hourly - Non-Exempt Summary/Objective: Quality Assurance 2 reports to Quality Assurance Manager. Quality Assurance 2 performs duties associated with the administration of the quality assurance provisions of contracts by designing, implementing, and maintaining documentation control. Write check points, check TIP's, call outs, understand specs, and understand standard items. Duties include, but are not limited to: • Get familiarized with NAVSEA Std Items, • Fill out and call out inspections/checkpoints, • Attend onsite checkpoints after shadow senior team members, • Follow documentation control, • Create and Review Formal Work Packages (FWP) following templates., • Conduct Surveillances (after completing Workmanship Training), • Execute quality control measures (after completing QCI Training), • Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Education / Experience Required: • High School Diploma or equivalent, • Must possess an excellent knowledge of ship repair procedures and test requirements, • Excellent (English) verbal and written communication skills, • Must be capable of independent, complex analysis, concept formation, and new method identification, • Must possess in depth knowledge of quality related contract documentation, • Microsoft Office 3 years Required Training: • Fill out, call out and inspections., • Quality Management System & ISO requirements, understanding., • Attends onsite checkpoints (ship/shop)., • Documentation Control, • Create and review FWP's, • Complete Workmanship Training Travel: This position may require the ability to travel. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The physical demands for this position are light to moderate. This position requires standing and walking for extensive periods of time. Requires the ability to walk over uneven surfaces and occasionally climb ladders and other ship elements. Work Authorization/Security Clearance (if applicable) • Completion of a satisfactory background check, • Passing a drug test and physical examination, • Eligibility to work in the US., • Obtaining DBIDS level security clearance., • OSHA 10 Maritime Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. AAP/EEO Statement Standard Ship Repair is an Equal Opportunity Employer: minority/female/disability/veteran/sexual orientation, encouraging diversity in the workplace and a drug-free workplace. Completion of a satisfactory background check. Must pass a drug test and physical examination.

Job DescriptionOutside Machinist - Career Opportunity - San Diego, CA Job Description • We are seeking a skilled Outside Machinist capable of performing installation, maintenance, and repair of ship's propulsion and auxiliary systems.Responsibilities, • Install, maintain, and repair propulsion and auxiliary systems on ships., • Repair, troubleshoot, and perform maintenance on boilers, pumps, and valves., • Work on board ships on auxiliary equipment, pumps, valves, and boiler systems., • Perform major and specialized mechanical overhaul and repair work on gasoline and marine engines, outboard motors, and related marine equipment., • Establish and maintain a preventive maintenance program for marine engines and related equipment., • Test marine engines and equipment to determine the need for repairs or adjustments., • Repair and maintain hydraulic equipment and valves., • Operate hand and power tools associated with marine engine and equipment repair., • Assist in the fabrication of equipment.Essential Skills, • Experience in the shipyard or Navy as an Outside Machinist or Machinist Mate., • Over 5 years of experience as an Outside Machinist (Journeyman Level) is ideal, but 3+ years will be considered.Additional Skills & Qualifications, • Proficiency in ship repair, diesel engines, and valve repair., • Experience with blueprint reading and machining., • Familiarity with hydraulics and marine mechanics.Why Work Here, • Enjoy long-term stability with consistent work in a contract-to-hire opportunity. We provide excellent benefits, including a 401K, medical/dental insurance, life insurance, and opportunities for growth.Work Environment, • The work will take place at shipyards including NASSCO, BAE, CMSD, and NBSD. The position requires flexibility to work on the 1st shift from 6 am to 2:30 pm, with potential for overtime Monday through Sunday. Ten-hour workdays may be required if needed.Job Type & Location The pay range for this position is $25.55 - $36.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in San Diego,CA. Application Deadline This position is anticipated to close on Sep 23, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Job Summary: The Shipyard Competent Person (SCP) is responsible for ensuring a safe working environment in shipyard spaces where employees may be exposed to hazardous conditions, including confined spaces, toxic materials, and fire hazards. The SCP performs inspections, atmospheric testing, and certifications in accordance with OSHA 29 CFR 1915 regulations and company safety policies. Key Responsibilities: • Conduct inspections of confined and enclosed spaces (e.g., tanks, voids, double bottoms) prior to worker entry., • Test atmospheric conditions using calibrated monitoring equipment to check for oxygen levels, flammable gases, and toxic vapors., • Determine and document whether spaces are safe for hot work, cleaning, painting, or entry., • Complete and maintain records of space certifications, permits, and inspection reports., • Collaborate with the Safety Department to ensure compliance with all relevant OSHA maritime regulations., • Identify and mitigate hazards through hazard recognition and effective communication with supervisors and workers., • Stop work and take corrective actions if unsafe conditions are identified., • Provide training and guidance to workers and supervisors on confined space safety and hot work practices., • Participate in safety audits, incident investigations, and toolbox talks., • Ensure that protective equipment and engineering controls are in place and properly used. Required Qualifications: • High School Diploma or GED., • Certification as a Shipyard Competent Person (in accordance with OSHA 29 CFR 1915.7)., • Minimum 2 years of experience in shipyard operations or maritime industry safety., • Familiarity with confined space entry procedures, gas testing equipment, and hot work protocols., • Ability to read and interpret blueprints and ship drawings., • Strong communication skills and attention to detail., • Physically able to work in tight spaces and climb ladders and scaffolding. Preferred Qualifications: • Additional safety certifications (e.g., OSHA 10/30 Maritime, First Aid/CPR, HAZWOPER)., • Experience in ship repair, marine construction, or naval operations., • Bilingual in English and Spanish is a plus. Working Conditions: • Exposure to outdoor elements, shipboard environments, confined spaces, and high-noise areas., • Use of personal protective equipment (PPE) including hard hats, respirators, gloves, and protective clothing., • May require weekend or shift work based on project needs. Compensation: • Competitive hourly wage or salary based on experience., • Benefits package includes health insurance, 401(k), paid time off, and training opportunities.

Job Description Labor One is hiring Journey-Level Pipefitters for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: A pipefitter journeyman is responsible for removing, repairing, targeting, laying out, fabricating, installing, and testing marine piping systems such as Auxiliary Salt Water, Fire Main, Potable Water, Hydraulic, Compressed Air, Fuel Oil, Lube Oil, Engine Exhaust etc. in accordance with work item specifications, NAVSEA/Military standards and drawings or other regulatory body standards such as ABS, Military Sealift Command, etc. Repair and fabrication include the use of various shop equipment such as table saws, pipe threading machines, bending machines (power as well as hand operated), drill presses and brazing equipment. Additional tasks associated with this position include blanking and pressure testing of tanks (structural boundary testing). The journeyman is also responsible for providing direction to improvers and helpers as directed by the supervisor. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a comprehensive knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information such as conditions found reports in writing that include recommended corrective action., 5. Must have a thorough knowledge of experience with P-73 joint fit-up., 6. Must have a comprehensive knowledge of Silver Brazing theory., 8. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals., 9. Must possess a comprehensive knowledge of equipment and work processes used in marine pipe fabrication, repair, and targeting., 10. Must be able to operate and care for equipment, portable power tools, and hand tools used to accomplish assigned work., 11. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 12. Must have six (6) years of pipefitting experience, four (3) of which in the maritime repair environment. DUTIES AND RESPONSIBILITIES 1. Provide direction to a pipefitter Improver and Helper if assigned., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and pipe shop supervisor., 3. Work shifts and overtime as assigned., 4. Be accountable for completion of daily work assignments., 5. Comply with OSHA standards and shipyard's best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Ensure the work site is ready for hot work before commencing hot work. Communicate with the Fire Watch and provide direction as necessary., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 10. Confer with the supervisor to resolve unexpected events related to your assigned task. Carry out written or oral instructions. Work Tasks Include: a. Inspect and prepare the area for work, taking special care if hot work is required. Verify gas free certifications and tag-outs, before commencing any work. b. Run lines and leads required to accomplish work. Accomplish drop test if using flammable or oxygen depleting gases. c. Inspect work for defects before turning the job over to welders. Correct fit-ups as required.. Confer with supervision before correcting deficiencies. d. Document existing conditions before commencing work using Condition Found Reports (CFR). e. Remove damaged pipe in accordance with drawings and specifications. f. Measure or template pipe for fabrication. g. Blank systems in accordance with standard Item 009-24 or other applicable safety standards. h. Fit up new pipe using the proper fit up type in accordance with specifications. i. Ensure a strain free fit-up to pumps or other connecting equipment. j. Blank tanks and accomplish boundary air tests. k. Accomplish or verify Lock-out Tag-out requirements before commencing. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 75 lbs on an occasional basis (0-25% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (25-75% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift only 40 hours a week / OT with approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Location: San Diego, CA Company: Standard Inspection Services Additional Locations: Bremerton, WA, US Level of Experience: Level I Reports to: Quality Assurance Supervisor/Manager Salary Status: Hourly - Non-Exempt Summary/Objective: Quality Assurance I report to Quality Assurance Manager. Quality Assurance I perform duties associated with the administration of the quality assurance provisions of contracts by designing, implementing, and maintaining documentation control. Write check points, check TIP's, call outs, understand specs, and understand standard items. Duties include, but are not limited to: • Get familiarized with NAVSEA Std Items, • Fill out and call out inspections/checkpoints, • Attend onsite checkpoints after shadow senior team members, • Follow documentation control, • Create and Review Formal Work Packages (FWP) following templates., • Conduct Surveillances (after completing Workmanship Training) Education/Experience Required: • High School Diploma or equivalent, • Must possess an excellent knowledge of ship repair procedures and test requirements, • Excellent (English) verbal and written communication skills, • Must be capable of independent, complex analysis, concept formation, and new method identification, • Must possess in depth knowledge of quality related contract documentation Preferred: • Microsoft Office 3 years Required Training • Fill out, call out and inspections., • Quality Management System & ISO requirements, understanding., • Attend on sight checkpoint (ship/shop)., • Documentation Control, • Create and review FWP's, • Complete Workmanship Training Travel: This position does not require ability to travel. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The physical demands for this position are light to moderate. This position requires standing and walking for extensive periods of time. Requires the ability to walk over uneven surfaces and occasionally climb ladders and other ship elements. Work Authorization/Security Clearance (if applicable) • Completion of a satisfactory background check, • Passing a drug test and physical examination, • Eligibility to work in the US., • Obtaining DBIDS level security clearance., • OSHA 10 Maritime Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. AAP/EEO Statement Standard Inspection Services is an Equal Opportunity Employer: minority/female/disability/veteran/sexual orientation, encouraging diversity in the workplace and a drug-free workplace. Completion of a satisfactory background check. Must pass a drug test and physical examination.

Job Description OUR CORE PILLARS: Safety | Operational Excellence | Shareholder Value Propulsion Controls Engineering has a current opening at our San Diego, California location for an Estimator III, with a minimum of 4-8 years experience in ship repair / shipyard industry preferably from a common trade (i.e. Outside Machinist, Pipefitter, etc.). PCE is a full service electro-mechanical repair and diesel repair contractor. PCE has garnered a wealth of extensive experience in successfully executing major system overhauls across numerous ports throughout the world on virtually every class of ship currently in operation. Job Summary: Estimator III, develops and submits labor and material estimates for Fixed Price and Time & Material requests for quote (RFQ). This will include large scale projects, analyzing specifications and request for proposals to prepare time, cost and labor estimates for products, projects and services. Essential Functions / Estimator III / Ship Repair: • Possesses a superior knowledge of all common trades and their capabilities (i.e., welding, outside/inside machinist, electrician, structural, pipe, rigging, etc., • Ability to read and understand Request for Pricing/Request for Quote (RFP/RFQ) solicitation documents as necessary to interpret and convey requirements., • Reads and effectively interprets all types of blueprints, drawings, sketches, and work specifications., • Develops and Maintains up-to-date contact listing of clients, subcontractors and suppliers as necessary to facilitate timely submission of quotes and/or bids. Education: • Minimum 4-8 years experience in ship repair / shipyard industry preferably from a common trade (i.e. Outside Machinist, Pipefitter, etc.), • Must possess extensive knowledge of ship repair specifications commensurate with ship-wide/multi-system repair initiatives and Standard Items.., • Possess extensive knowledge of all ship systems to include propulsion, auxiliary systems, motors, power generation, fluid systems and deck equipment., • Must have good communication skills required to effectively communicate with associated ship’s personnel, contractors, subcontractors, vendors, customers and employees., • Must be familiar with standard concepts, practices, and procedures in bid estimates., • Health Insurance (medical, dental, vision, company paid life insurance, voluntary plans such as supplemental life insurance, critical illness, and hospital indemnity), • Paid Time Off, • Company paid holidays, • Retirement savings plan (401(k) plan with company matching and an Employee Stock Ownership Plan) ESTIMATOR III EEO/AA/Vet/Disabled #zr

Job Description Labor One is hiring Journey-Level Structural Welders for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for accomplishing, with minimal supervision, production welding on a ship or in a shop to support structural repairs and modernization of marine vessels including US Naval Vessels, Military Sealift Command, and commercial ships. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information to the supervisor., 5. Must understand SMAW, FCAW, and GMAW., 6. Must be able to certify in all positions: • SMAW Full Penetration weld with permanent backing (ceramic and metal), • FCAW Full Penetration weld with permanent backing (ceramic and metal), • GMAW Full Penetration weld with permanent backing (ceramic and metal) 7. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standards manuals., 8. Must possess a working knowledge of welding equipment and work processes used in marine welding., 9. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 10. Be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals., 11. Must understand the US customary and metric measurement system., 12. Must have up to four (4) years of welding experience in a related field. DUTIES AND RESPONSIBILITIES 1. Communicate with and provide direction to the welding helper and fire watch as needed to complete the assigned tasks., 2. Communicate explicitly with the Fire Watch and do not commence hot work until the area is ready in accordance with fire prevention protocol. ., 3. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor., 4. Work shifts and overtime as assigned., 5. Be accountable for completion of daily work assignments. 6. Comply with OSHA standards and the shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 8. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 9. Carry out written or oral instructions. Confer with the supervisor to resolve unexpected events related to your assigned task. Work Tasks Include: a. Prepare work area for hot work, including checking hot work certifications at the work site and adjacent areas. b. Prepare surfaces for production welding by inspecting joints and cleaning as required. c. Inspect welds for defects. Confer with supervision before correcting deficiencies. d. Document existing conditions. e. Become familiar with applicable safety requirements before commencing work. f. Ensure Lock-out Tag-out has been correctly accomplished. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day). 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day). 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel. 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps). 5. Work at a variety of levels and positions (ex. Waist, eye, above head). 6. Good balance while working on uneven surfaces and maneuvering obstacles. 7. Sufficient handgrip and coordination to carry and operate tools and equipment. 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day). 9. Respond to visual, verbal, and audible sounds/commands. 10. Work at heights above 12' from ladders, scaffolding, and manlifts. 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down. 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers. 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 3rd Shift 40 Hours a week / OT with approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Outside Machinist Improvers for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for removing, installing, and testing main and auxiliary shipboard equipment including but not limited to: Main Reduction Gears (MRG), pumps, valves, hydraulic equipment, steam equipment, valves, propellers, bearings, etc. on maritime vessels including US Navy, Military Sealift Command, and commercial. The work occurs in various stages of repair and modernization and requiring the ability to operate a wide variety of tools and machinery, and the ability to read and comprehend specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have basic print (drawing) reading and interpretation skills., 3. Must have a working understanding of ship repair terminology and ship compartment location nomenclature., 4. Must be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 5. Must be able to write reports describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action., 6. Must be able to work from Process Control Procedures (PCP)., 7. Must be able to use precision measurement tools., 8. Must be able to effectively confer job related information to the structural supervisor and small groups, and provide technical guidance to Helpers and Improvers., 9. Must have a basic understanding of drawings, sketches, tech manuals, and user manuals., 10. Must understand the NAVSEA standard items, especially 009-04 for tests, inspections, and check points; 009-23 for interferences; and 009-24 for blanking and match marks., 11. Must have a comprehensive understanding of Lock-out / Tag-out procedures., 12. Must understand the proper and safe use and operation of the hand and power tools required to accomplish the work., 13. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system and the metric system., 14. Three (3) years of machinist experience, preferably one (1) of which is in the maritime environment. DUTIES AND RESPONSIBILITIES 1. Comply with OSHA standards and the shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the supervisor., 3. Work shifts and overtime as assigned., 4. Keep the work area clean and safe at all times, especially at the end of the shift., 5. Complete work assignments as scheduled and provide status of unfinished work for shift turnover., 6. Assist with the preparation of Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 7. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which requires that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 8. Receive technical guidance and carry out directions from a Journeyman or Supervisor., 9. Carry out instructions furnished in written, oral, or diagram form. Resolve unexpected events related to your assigned task in a professional manner. Work Tasks Include: a. Prepare a safe work area especially as it relates to fire prevention. b. Assist in the coordinate work with other crafts to disconnect and remove equipment. c. Compile as-found reports identifying the status of equipment prior to work. d. Assist with in-place valve repairs. e. Assist with material take offs with adequate information for ordering. f. Assist with equipment alignment. g. Assist with operational tests. h. Keep blanking logs up to date. i. Run and remove lines and leads as required to accomplish work and in accordance with OSHA and the shipyards safety standards. j. Assist with Lock-out Tag-out activities for work being performed. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that personnel may encounter every day in the course of performing work on ships, piers, docks. While performing the duties of this position the employee is regularly required to: stand; walk; use hands and fingers to handle directly or work from touch; reach out with arms; climb; stoop; kneel; crouch; crawl; and communicate in a loud environment. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: Candidates may be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 1st Shift 40 hours a week. Overtime with Supervisors approval. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Journey-Level Outside Machinists for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for removing, installing, and testing main and auxiliary shipboard equipment including but not limited to: Main Reduction Gears (MRG), pumps, valves, hydraulic equipment, steam equipment, valves, propellers, bearings, etc. on maritime vessels including US Navy, Military Sealift Command, and commercial. The work occurs in various stages of repair and modernization and requiring the ability to operate a wide variety of tools and machinery, and the ability to read and comprehend specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have comprehensive understanding of ship repair terminology and ship compartment location nomenclature., 3. Must be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to write comprehensive Condition Found Reports (CFR) describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action., 5. Must be able to work from Process Control Procedures (PCP)., 6. Must be able to use precision measurement tools., 7. Must be able to effectively confer job related information to the structural supervisor and small groups, and provide technical guidance to Helpers and Improvers., 8. Must be able to interpret drawings, sketches, tech manuals, and user manuals to the extent necessary to remove, repair, and install equipment., 9. Must understand the NAVSEA standard items, especially 009-04 for tests, inspections, and check points; 009-23 for interferences; and 009-24 for blanking and match marks., 10. Must have a comprehensive understanding of Lock-out / Tag-out procedures., 11. Must understand laser alignment., 12. Must understand reverse indicator alignment procedures., 13. Must understand the proper and safe use and operation of the hand and power tools required to accomplish the work., 14. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system and the metric system., 15. Six (6) years of machinist experience, two (2) of which in the maritime environment. DUTIES AND RESPONSIBILITIES 1. Comply with OSHA standards and the shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the supervisor. 3. Work shifts and overtime as assigned., 3. Keep the work area clean and safe at all times, especially at the end of the shift., 4. Complete work assignments as scheduled and provide status of unfinished work for shift turnover., 5. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 6. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which requires that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that personnel may encounter every day in the course of performing work on ships, piers, docks. While performing the duties of this position the employee is regularly required to: stand; walk; use hands and fingers to handle directly or work from touch; reach out with arms; climb; stoop; kneel; crouch; crawl; and communicate in a loud environment. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: Candidates may be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift 40 hours a week / OT on approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description OUR CORE PILLARS: Safety | Operational Excellence | Shareholder Value Propulsion Controls Engineering has a job opening for an Outside Machinist Journeyman Diesel Mechanic, with a minimum of 5 years diesel experience preferred. PCE is a full service electro-mechanical repair and diesel repair contractor. PCE has garnered a wealth of extensive experience in successfully executing major system overhauls across numerous ports throughout the world on virtually every class of ship currently in operation. Job Summary / Outside Machinist: Diesel Mechanic Perform major and specialized mechanical overhaul and repair work on diesel marine engines and related marine equipment and systems using work specifications and technical manuals. Duties and Responsibilities • Maintain detailed records of maintenance and repair work performed., • Maintain open communication with the management team regarding job status, updates, and changes., • Communicate effectively with customers regarding repair needs and solutions., • Provide guidance and training to junior mechanics and apprentices., • Order and manage inventory of parts needed for repairs., • Must be 18 years of age or older to apply., • Minimum 5 years of marine and/or shipyard experience preferred., • Health Insurance (medical, dental, vision, company paid life insurance, voluntary plans such as supplemental life insurance, critical illness, and hospital indemnity), • Paid Time Off, • Company paid holidays, • Retirement savings plan (401(k) plan with company matching and an Employee Stock Ownership Plan OUTSIDE MACHINIST JOURNEYMAN DIESEL MECHANIC EEO/AA/Vet/Disabled #zr Copyright © 2024, ADP, Inc. All rights reserved.Privacy|Legal|Requirements|Artificial IntelligencePowered by

Job DescriptionLabor One is hiring Journey-Level Specialty Welders (Alum, CuNi, Stainless; TIG) for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information This position is responsible for welding pipe of various metals on a ship or in a shop to support mechanical repairs and modernization of marine vessels including US Naval, Military Sealift Command, and commercial ships. The journeyman welder is also responsible for providing direction to assigned helpers. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information such as conditions found by writing condition reports that include recommended corrective action., 5. Must have a thorough knowledge of SMAW, FCAW, and GMAW theory., 6. Must be able to certify in P-3 joint with permanent backing ring, and P-14 socket weld joint:, 7. SMAW, 8. GTAW, 9. FCAW OR, 10. Silver Brazing, 11. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals., 12. Must possess a working knowledge of equipment and work processes used in marine pipe welding., 13. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 14. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 15. Must have four (4) years of pipe welding experience. DUTIES AND RESPONSIBILITIES 1. Provide direction to a pipe welding helper, if assigned, as needed to complete the assigned tasks., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and pipe shop supervisor., 3. Work shifts and overtime as assigned., 4. Be accountable for completion of daily work assignments., 5. Comply with OSHA standards and the shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Ensure the work site is ready for hot work before commencing hot work. Communicate with the Fire Watch and provide direction as necessary., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 10. Confer with the supervisor to resolve unexpected events related to your assigned task. Carry out written or oral instructions. Work Tasks Include: a. Inspect and prepare the area for hot work, including gas free certifications and tag-outs, before commencing any hot work. b. Prepares work area for production welding by inspecting joints and cleaning as required. c. Inspect welds for defects. Confer with supervision before correcting deficiencies. d. Document existing conditions using Condition Found Reports. e. Ensure gas free certifications are accurate and up to date. f. Assist with Lock-out Tag-out for work being performed. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd shift only 40 hours a week / OT on approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job DescriptionLabor One is hiring Journey-Level Riggers for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The qualifications listed below are representative of the knowledge, skill, and/or ability desired. The individual must have working knowledge of procedures, strong mechanical aptitude and ability, and be able to follow directions. The individual must possess experience in the trade; knowledge of ship terminology, blueprint reading, job specifications and manuals. Must be able to follow directions and work with limited supervision. Must be willing to work with and train subordinates. SAFETY Must comply with Company safety rules and OSHA standards. Must be physically and medically qualified to wear required personal protective equipment as prescribed under OSHA standards. ESSENTIAL QUALIFICATIONS, DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. -Technically proficient in tasks, work processes, and equipment operation. -Accountable for completion of daily work assignments including the completion and signatures for work completion and quality. -Creates a working environment for compliant with quality, safety, environmental, and health regulations and policies. -Thorough knowledge of equipment used in rigging operations, included but not limited to lifting and moving equipment. -Knowledge of rigging testing requirements, proper set up and operation of equipment. -Selects cables, pulleys, winches, blocks, and sheaves, according to weight and size of load to be moved. -Attaches pulley and blocks to fixed overhead structures such as beams and ceilings with bolts and clamps. -Attaches load with lifting devices such as wires, nylon straps and chains to crane hook. -Gives directions to crane operator engaged in hoisting and moving loads to ensure safety of workers and material handled. -Sets up cranes hoisting equipment. Safe handling of anchors and chains. Lowers, handles and tests lifeboats. -Tests ships cranes using various rigging. Ability to interpret all crane load charts and blueprints. -Ability to work any assigned shift and ability to work assigned overtime. May be assigned tasks outside craft as required. -Must comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be business like and free of bias, prejudice, and harassment EDUCATION and/or EXPERIENCE Must complete practical demonstration of skills listed above. LANGUAGE SKILLS Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations before customers, clients, or employees of organization. MATHEMATICAL SKILLS The ability to add, subtract, multiply, and divide all units of measure, whole numbers, common fractions, and decimals in U.S. and metric conversions. REASONING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems that may arise in certain situations. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. Specific requirements include the following: 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Demonstrate the ability to bend, squat crouch, crawl and kneel., 4. Demonstrate the ability to climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Perform prolonged standing (2-3 hours)., 6. Able to work at a variety of levels (ex. Waist, eye, above head)., 7. Demonstrate the ability to safely and appropriately use required tools and equipment., 8. Demonstrate good balance while working on uneven surfaces and maneuvering obstacles., 9. Posses sufficient handgrip and coordination to carry and operate tools and equipment., 10. Ability to utilize personal protective equipment (hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards., 11. Ability to withstand extreme temperatures (cold and hot)., 12. Ability to enter 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 13. Able to respond to verbal and audible sounds/commands., 14. Able to utilize adequate visual skills., 15. Ability to work at heights above 12' while working from ladders, scaffolding and/or manlifts., 16. Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 17. Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers. 18. Ability to turn head from side to side and about on the vertical axis., 18. Ability to turn body at the waist from side to side and about the vertical axis. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the environment varies from normal office environment to wet and/or humid conditions, outside weather conditions, extreme cold, and extreme heat. The employee is occasionally exposed to moving mechanical parts and high places. The noise level in the shipyard environment is usually loud; office environment is usually low to moderate. The wearing of appropriate personal protective equipment mitigates risks associated with these conditions and is mandatory. 1st Shift 40 hours a week / OT on approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Outside Machinist Mechanic (San Diego, CA) Lead Marine San Diego National City, CA, USA Full Time Must be open to 1st Shift (6:00am – 2:30pm) or 2nd Shift (3:00pm – 11:30pm) Lead Marine has immediate openings for Marine/Navy Mechanics in the San Diego Naval Shipyard Industry. Must have navy repair/marine mechanic or prior military experience. Must be DBIDs Badge eligible to gain access to Naval Bases. Responsibilities: • Must have at least 4 years of naval ship mechanical experience, preferably on fire suppression systems and damage control systems., • Install, adjust, set and repair or replace various control. Regulating or safety devices such as meters, gauges, valves, governors and automatic alarms. Test or assist in testing of shipboard machinery., • Lays out passage holes on bulkheads, decks, and other surfaces for connections, for example shafting and steam lines., • Must have knowledge of NAVSEA Standard Items applicable to position, • Manage and ensure that daily required tasks are completed on time and in a safe manner., • Detect and locate grounds, open circuits and short circuits in distribution generators and systems. Maintain and repair telephones, circuits, and associated equipment., • Prior Naval experience a plus, • Utilize smart device applications to manage / schedule inspection documentation., • Complete all required paperwork and upload to database., • Document required deficiencies and items required for repair., • Must be able to read and interpret blueprints, drawings and schematics., • Valve & auxiliary maintenance/repair, • Candidates must be able to work as part of a team and may be asked to work weekends and overtime. Benefits: • Health insurance, • Paid holidays, • Paid sick leave To see a list of more available jobs, please visit Company DescriptionOur mission is to be the Best In Class manpower support company by operating on the principals of delivering the highest level professionalism, integrity, honesty, and safety to our valued employees and clients. Lead Staffing, established in 2010, specializes in Construction, Industrial and Marine Staffing of Skilled Tradespeople throughout the United States of America. Our goal is to work with regional and national contractors that share our commitment towards safety and to provide long term rewarding work assignments for our valued employees. Our success in consistently filling our customer's orders is directly related to the tenure of our sales and recruiting staff, all of whom on average have in excess of 10 years industry experience. LEAD is proud to be an Equal Opportunity and Affirmative Action Employer. LEAD is committed to providing an environment of mutual respect where employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy (including childbirth, lactation and related medical conditions), national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information (including characteristics and testing), military and veteran status, and any other characteristic protected by applicable law. We believe that diversity and inclusion among our teammates is critical to our success as a growing national company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool.Our mission is to be the Best In Class manpower support company by operating on the principals of delivering the highest level professionalism, integrity, honesty, and safety to our valued employees and clients.\r\n\r\nLead Staffing, established in 2010, specializes in Construction, Industrial and Marine Staffing of Skilled Tradespeople throughout the United States of America. Our goal is to work with regional and national contractors that share our commitment towards safety and to provide long term rewarding work assignments for our valued employees.\r\n\r\nOur success in consistently filling our customer's orders is directly related to the tenure of our sales and recruiting staff, all of whom on average have in excess of 10 years industry experience.\r\n\r\nLEAD is proud to be an Equal Opportunity and Affirmative Action Employer. \r\n\r\nLEAD is committed to providing an environment of mutual respect where employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy (including childbirth, lactation and related medical conditions), national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information (including characteristics and testing), military and veteran status, and any other characteristic protected by applicable law. We believe that diversity and inclusion among our teammates is critical to our success as a growing national company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool.

Job Description JOB DESCRIPTION Employment Type: Full Time/Hourly/Non-Exempt Salary Information: $20.17 - $28.81 Who We Are Continental Maritime of San Diego, a Titan company, is a certified Master Ship Repair Contractor for the U.S. Navy. Our skilled professionals have performed hundreds of ship repairs for the Navy and Military Sealift Command. CMSD does repair on all types of major surface vessels including CVN, CG, and DDG, and all types of amphibious ships including LHD, LHA, LSD, LPD, and auxiliary ships. Our work also includes repairs and alterations to a wide range of Combatant, Hull, Mechanical and Electrical, and Habitability Systems. Position Specifics Continental Maritime of San Diego is currently seeking a Shipfitter Journeyman to help support our operations. The Shipfitter Journeyman is responsible for the assembly, cutting, grinding metal structural parts to include plates, bulkheads, and strong-backs. The Shipfitter Journeyman also aligns parts in relation to each other, fit-up and tacks foundations and structural members, performs layout according to blueprints or reference lines, marks locations of holes to be drilled, drives wedges, and installs temporary fasteners to hold parts in place for welding or riveting. Minimum Requirements • Must possess a T1 certification, • Knowledge of blueprint reading, ship terminology and different metals, • Must be able to demonstrate proficient burning, welding, and craftmanship skills, • Must have a minimum of 3 years of shipfitting experience, • Must be able to work 1st & 2nd shift, • US Citizenship is required, • Most work is performed aboard ships or in industrial conditions. Shop, shipboard, warehouse, industrial environment, • May be exposed to fumes and irritants including welding/burning fumes, paints, oils, greases and various cleaning solutions and solvents, noise, high heat and humidity hazards while wearing the required Personal Protective Equipment (PPE), • Frequently moves throughout the shipyard, • Work at heights and in confined spaces, • Must be able to ascend/descend stairs/ladders/ramps, aboard ships in shipyards under industrial conditions and in confined spaces, • Must be able to move heavy equipment and boxes, weighing up to 50 pounds, • May be exposed to rapid changes in microclimates, industrial processes, and other environmental factors while collecting data, providing direction, and observing performance of task teams The Continental Maritime of San Diego Management Team is committed to providing the necessary structure, tools, and environment for our employees. We act in the economic best interests of our customers and our company, in a professional, honest and sincere manner. Our mission is accomplished through unwavering commitment to the following principles: • Teamwork, • Professional Conduct, • Integrity, • Total Quality, • Customer Satisfaction, • Open, honest communication at all levels, • Awareness of environmental issues Apply online at: cmsd-msr.com/careers 1995 Bay Front Street, San Diego, CA 92113

Job Description Labor One is hiring Journey-Level Sheetmetal Fitters for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description:This position is responsible for performing, with minimal supervision, sheet metal repairs and installation on maritime vessels such as Navy Ships, Military Sealift Command ships, and commercial vessels. Repairs and installation include shipboard and shop tasks required to plan, layout, fabrication, and assemble various sheetmetal structures throughout the ship. The position requires a comprehensive understanding of ship terminology, blueprint reading, measurements, and the ability to interpret job specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a comprehensive understanding of ship repair terminology and ship compartment location nomenclature., 3. Must be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must possess the ability to write comprehensive Condition Found Reports (CFR) describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action., 5. Must be able to effectively confer job related information to the structural supervisor, improvers, and helpers., 6. Must be able to read and interpret structural drawings, sketches, and specifications., 7. Must be able to interpret appropriate sections of NAVSEA, ABS, Coast Guard standards and manufacturer's tech manuals., 8. Must have experience repairing and installing shipboard habitability spaces including: berthing equipment; galley equipment; ventilation ducting (heating and cooling); and joiner doors in accordance with drawings, specifications, and sketches., 9. Must understand the principle of balancing air systems including taking proper readings and documenting the results., 10. Must have experience using hand and power tools and understand the operation of fabricating machines such as shears, brakes, presses, forming rolls and routers., 11. Must have experience tack welding using SMAW or GMAW., 12. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 13. Six (6) years of related experience, three (3) of which were in the maritime environment. DUTIES AND RESPONSIBILITIES 1. Must comply with OSHA standards and the shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor. 3. Work shifts and overtime as assigned., 3. Keeping the work area clean and safe at all times, especially at the end of the shift., 4. Complete daily work assignments and provide status of unfinished work for shift turnover., 5. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 6. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 7. Carry out written and verbal instructions., 8. Resolve unexpected events related to your assigned task in a professional manner. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift 40 hrs per week/ OT available per HM approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description JOB DESCRIPTION Employment Type: Full Time/Hourly/Non-Exempt Salary Information: $22.01 - $31.44/Hourly Who We Are Continental Maritime of San Diego, a Titan company, is a certified Master Ship Repair Contractor for the U.S. Navy. Our skilled professionals have performed hundreds of ship repairs for the Navy and Military Sealift Command. CMSD does repair on all types of major surface vessels including CVN, CG, and DDG, and all types of amphibious ships including LHD, LHA, LSD, LPD, and auxiliary ships. Our work also includes repairs and alterations to a wide range of Combatant, Hull, Mechanical and Electrical, and Habitability Systems. Position Specifics Continental Maritime of San Diego is currently seeking a Tank Cleaner Journeyman to help support our operations. The Tank Cleaner Journeyman is responsible for Cleaning interior of storage tanks (fuel tanks), bilges, piping systems using high pressure hoses, acids, and hand tools; drain tanks to flush residue such as oil, fuel; sludge through tank openings; removes residue from bottom of tank using pump. Minimum Requirements • Working knowledge of fuel tanks, machinery, ship bilges, and piping systems; tank cleaning techniques; ship configuration; hand tool operation; basic mechanical and plumbing skills., • Must maintaining Shipyard Competent Person (SYCP) certification, • Minimum of 5 years of relevant experience is required, • Must be able to work any shift, • US Citizenship is required, • The ability to obtain a DBIDS credential is required Physical Requirements • Most work is performed aboard ships or in industrial conditions. Shop, shipboard, warehouse, industrial environment, • May be exposed to fumes and irritants including welding/burning fumes, paints, oils, greases and various cleaning solutions and solvents, noise, high heat and humidity hazards while wearing the required Personal Protective Equipment (PPE), • Frequently moves throughout the shipyard, • Works at heights and in confined spaces, • Must be able to ascend/descend stairs/ladders/ramps, aboard ships in shipyards under industrial conditions and in confined spaces, • Must be able to move heavy equipment and boxes, weighing up to 50 pounds, • May be exposed to rapid changes in microclimates, industrial processes, and other environmental factors while collecting data, providing direction, and observing performance of task teams The Continental Maritime of San Diego Management Team is committed to providing the necessary structure, tools, and environment for our employees. We act in the economic best interests of our customers and our company, in a professional, honest and sincere manner. Our mission is accomplished through unwavering commitment to the following principles: • Teamwork, • Professional Conduct, • Integrity, • Total Quality, • Customer Satisfaction, • Open, honest communication at all levels, • Awareness of environmental issues, • Empowerment to every level Continental Maritime of San Diego is an Equal Opportunity/Vets and Disabled Employer. U.S. Citizenship may be required for certain positions. We offer excellent company-paid benefits and savings plan. Apply in person to: Continental Maritime of San Diego, LLC 1995 Bay Front Street, San Diego, CA 92113 Apply online at

Job Description Labor One is hiring Journey-Level Shipfitters for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for performing, with minimal supervision, steel and aluminum structural work in all stages of repair and modernization of marine vessels including US Naval Vessels, Military Sealift Command, and commercial ships and barges. The position requires a working knowledge of procedures, strong mechanical aptitude and ability and be able to follow directions. The individual must possess experience in the trade, knowledge of ship terminology, blueprint reading, measurements, and the ability to interpret job specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Ability to comprehend instructions, drawings, and general correspondence., 2. Comprehensive understanding of ship repair terminology and ship compartment location nomenclature., 3. Be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Ability to write comprehensive Condition Found Reports (CFR) describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action., 5. Ability to effectively confer job related information to the structural supervisor and small groups., 6. Ability to read and interpret structural drawings (including weld symbols), sketches, specifications, and NavSea standard items and Navy damage control diagrams., 7. Experience fabricating templates, squaring plates, scribing in structures, and installing perpendiculars on ships in accordance with drawings, specifications, or sketches., 8. Experience using oxy-acetylene torch for cutting and washing., 9. Welding experience: SMAW (S-11A) (fillet) FCAW (S-1) (fillet) GMAW (S-25) (fillet), 10. Experience using hand and power tools safely including but not limited to mauls, grinders, circular and reciprocating saws, and hand and magnetic drill., 11. Understand the proper use and operation of structural shop fabrication equipment, including shears, punches, and brakes., 12. Possess a working understanding of the aluminum 5XXX process., 13. Ability to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system., 14. Possess a working knowledge of, and be able to take measurements using the metric system., 15. Four (4) years of related experience. DUTIES AND RESPONSIBILITIES 1. Must comply with OSHA standards and the shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor., 3. Work shifts and overtime as assigned., 4. Keeping the work area clean and safe at all times, especially at the end of the shift., 5. Understand relevant work processes, operation of equipment, and complete tasks proficiently., 6. Complete daily work assignments and provide status of unfinished work for shift turnover., 7. Use appropriate sections of NAVSEA, ABS, Coast Guard standards and manufacturer's tech manuals., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 10. Carry out instructions furnished in written, oral, or diagram form. Resolve unexpected events related to your assigned task in a professional manner. Work Tasks Include: a. Prepare the work area for hot work. Coordinate efforts with the fire watch. b. Measure, lay out, and mark structures to be removed using drawings, specifications, shop sketches, or direction from the structural supervisor. c. Cut out existing structures as required by the drawings or specifications, or as directed by the supervisor. d. Construct templates and fabricate foundations or other structures. e. Install prefabricated foundations and structures in accordance with drawings and specifications. f. Install aluminum in accordance with 5XXX standards. g. Direct and monitor the activities of assigned helpers or improvers. h. Remove remnants flush in preparation for new structures or succeeding production tasks. i. Run and remove lines and leads as required to accomplish work and in accordance with OSHA and the shipyards safety standards. j. Implement Lock-out Tag-out for work being performed. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 3rd Shift 40 Hours a week / OT with approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Journey-Level Shipfitters for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for performing, with minimal supervision, steel and aluminum structural work in all stages of repair and modernization of marine vessels including US Naval Vessels, Military Sealift Command, and commercial ships and barges. The position requires a working knowledge of procedures, strong mechanical aptitude and ability and be able to follow directions. The individual must possess experience in the trade, knowledge of ship terminology, blueprint reading, measurements, and the ability to interpret job specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Ability to comprehend instructions, drawings, and general correspondence., 2. Comprehensive understanding of ship repair terminology and ship compartment location nomenclature., 3. Be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Ability to write comprehensive Condition Found Reports (CFR) describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action., 5. Ability to effectively confer job related information to the structural supervisor and small groups., 6. Ability to read and interpret structural drawings (including weld symbols), sketches, specifications, and NavSea standard items and Navy damage control diagrams., 7. Experience fabricating templates, squaring plates, scribing in structures, and installing perpendiculars on ships in accordance with drawings, specifications, or sketches., 8. Experience using oxy-acetylene torch for cutting and washing., 9. Welding experience: SMAW (S-11A) (fillet) FCAW (S-1) (fillet) GMAW (S-25) (fillet), 10. Experience using hand and power tools safely including but not limited to mauls, grinders, circular and reciprocating saws, and hand and magnetic drill., 11. Understand the proper use and operation of structural shop fabrication equipment, including shears, punches, and brakes., 12. Possess a working understanding of the aluminum 5XXX process., 13. Ability to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system., 14. Possess a working knowledge of, and be able to take measurements using the metric system., 15. Four (4) years of related experience. DUTIES AND RESPONSIBILITIES 1. Must comply with OSHA standards and the shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor., 3. Work shifts and overtime as assigned., 4. Keeping the work area clean and safe at all times, especially at the end of the shift., 5. Understand relevant work processes, operation of equipment, and complete tasks proficiently., 6. Complete daily work assignments and provide status of unfinished work for shift turnover., 7. Use appropriate sections of NAVSEA, ABS, Coast Guard standards and manufacturer's tech manuals., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. WORK ENVIRONMENT -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: -The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. -While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. -The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift Only 40 hours a week / OT on approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description JOB DESCRIPTION Employment Type: Full Time/Hourly/Non-Exempt Salary Information: $18.50 - $26.43/Hourly Who We Are Continental Maritime of San Diego, a Titan company, is a certified Master Ship Repair Contractor for the U.S. Navy. Our skilled professionals have performed hundreds of ship repairs for the Navy and Military Sealift Command. CMSD does repair on all types of major surface vessels including CVN, CG, and DDG, and all types of amphibious ships including LHD, LHA, LSD, LPD, and auxiliary ships. Our work also includes repairs and alterations to a wide range of Combatant, Hull, Mechanical and Electrical, and Habitability Systems. Position Specifics Continental Maritime of San Diego is currently seeking a Tank Cleaner3 to help support our operations. The Tank Cleaner 3 is responsible for Cleaning interior of storage tanks (fuel tanks), bilges, piping systems using high pressure hoses, acids, and hand tools; drain tanks to flush residue such as oil, fuel; sludge through tank openings; removes residue from bottom of tank using pump. Minimum Requirements • Working knowledge of fuel tanks, machinery, ship bilges, and piping systems; tank cleaning techniques; ship configuration; hand tool operation; basic mechanical and plumbing skills., • Must maintaining Shipyard Competent Person (SYCP) certification, • Minimum of 3 years of relevant experience is required, • Must be able to work any shift, • US Citizenship is required, • The ability to obtain a DBIDS credential is required Physical Requirements • Most work is performed aboard ships or in industrial conditions. Shop, shipboard, warehouse, industrial environment, • May be exposed to fumes and irritants including welding/burning fumes, paints, oils, greases and various cleaning solutions and solvents, noise, high heat and humidity hazards while wearing the required Personal Protective Equipment (PPE), • Frequently moves throughout the shipyard, • Works at heights and in confined spaces, • Must be able to ascend/descend stairs/ladders/ramps, aboard ships in shipyards under industrial conditions and in confined spaces, • Must be able to move heavy equipment and boxes, weighing up to 50 pounds, • May be exposed to rapid changes in microclimates, industrial processes, and other environmental factors while collecting data, providing direction, and observing performance of task teams The Continental Maritime of San Diego Management Team is committed to providing the necessary structure, tools, and environment for our employees. We act in the economic best interests of our customers and our company, in a professional, honest and sincere manner. Our mission is accomplished through unwavering commitment to the following principles: • Teamwork, • Professional Conduct, • Integrity, • Total Quality, • Customer Satisfaction, • Open, honest communication at all levels, • Awareness of environmental issues, • Empowerment to every level Continental Maritime of San Diego is an Equal Opportunity/Vets and Disabled Employer. U.S. Citizenship may be required for certain positions. We offer excellent company-paid benefits and savings plan. Apply in person to: Continental Maritime of San Diego, LLC 1995 Bay Front Street, San Diego, CA 92113 Apply online at

Job Description Labor One is hiring Journey-Level Insulators for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for performing, with minimal supervision, the installation and removal of insulation of any component onboard ships. A journeyman measures, cuts and fabricates materials for insulation application to bulkheads, overheads, piping, ducts, machinery, and equipment to minimize heat transfer, prevent moisture condensation, and to deaden sound. Wok is accomplished in all phases of ship repair and modernization of maritime vessels including US Naval Vessels, Military Sealift Command, and commercial ships and barges. The position requires a working knowledge of procedures, comprehensive knowledge of the insulation craft and the drive to accomplish quality work on schedule. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Musty have a comprehensive understanding of ship repair terminology and ship compartment location nomenclature., 3. Must be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to write Condition Found Reports (CFR) describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action., 5. Must be able to effectively confer job related information to the supervisor, improvers, and helper., 6. Must have experience applying hullboard, Armaflex, Cal-sil, ventilation insulation, and insulation pads., 7. Must have experience fabricating insulation pads., 8. Must have experience using hand and power tools associated with the trade in a safe manner., 9. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system., 10. Must possess a basic understanding of the metric system., 11. Six (6) years of related experience, three (3) of which must be in the maritime environment. DUTIES AND RESPONSIBILITIES 1. Must comply with OSHA standards and the shipyards best safety practices., 2. Must arrive at the designated work site at the assigned time and end the shift as directed by the supervisor., 3. Work shifts and overtime as assigned., 4. Must keeping the work area clean and safe at all times, especially at the end of the shift., 5. Understand relevant work processes, operation of equipment, and complete tasks proficiently., 6. Complete daily work assignments and provide status of unfinished work for shift turnover., 7. Use appropriate sections of NAVSEA, ABS, Coast Guard standards and manufacturer's tech manuals required to accomplish the insulation task., 8. Provide guidance to Improvers and Helpers., 9. Provide Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 10. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 11. Carry out instructions furnished in written, oral, or diagram form. Resolve unexpected events related to your assigned task in a professional manner. WORK ENVIRONMENT -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. -----The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift 40 Hrs per Week OT per hiring Managers approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Insulator Helpers for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for performing the installation and removal of insulation of any component onboard ships. A Helper works under the guidance of an Improver, Journeyman, and Supervisor to measure, cuts and fabricates materials for insulation application to bulkheads, overheads, piping, ducts, machinery, and equipment to minimize heat transfer, prevent moisture condensation, and to deaden sound. Work is accomplished in all phases of ship repair and modernization of maritime vessels including US Naval Vessels, Military Sealift Command, and commercial ships and barges. The position requires a basic knowledge of procedures and the insulation craft, and the drive to accomplish quality work and learn. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Musty have a basic understanding of ship repair terminology and ship compartment location nomenclature., 3. Must be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to write a report for the supervisor or journeyman describing the material condition of the ship as it pertains to the assigned work item., 5. Must be able to effectively confer job related information to the improver, journeyman, and supervisor., 6. Must have experience using hand and power tools associated with the trade in a safe manner., 7. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system., 8. Two (2) years of related experience, some of which must be in the maritime environment. DUTIES AND RESPONSIBILITIES 1. Must comply with OSHA standards and the shipyards best safety practices., 2. Must arrive at the designated work site at the assigned time and end the shift as directed by the supervisor., 3. Work shifts and overtime as assigned., 4. Must keep the work area clean and safe at all times, especially at the end of the shift., 5. Must follow the direction provided by the supervisor, improver, and journeyman., 6. Complete daily work assignments and provide status of unfinished work., 7. Use appropriate sections of NAVSEA, ABS, Coast Guard standards and manufacturer's tech manuals required to accomplish the insulation task., 8. Assist with providing Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 10. Carry out instructions furnished in written, oral, or diagram form. Work with the supervisor, journeyman, and Improver to resolve, in a professional manner, unexpected events related to your assigned task. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel. 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 4. Work at a variety of levels and positions (ex. Waist, eye, above head)., 5. Good balance while working on uneven surfaces and maneuvering obstacles., 6. Sufficient handgrip and coordination to carry and operate tools and equipment., 7. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 8. Respond to visual, verbal, and audible sounds/commands., 9. Work at heights above 12' from ladders, scaffolding, and manlifts., 10. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 11. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 12. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd shift 40 hours a week; overtime with supervisors approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Job Description: The selected candidate shall report directly to the Supervisory Planner/Estimator and shall be responsible for planning, conducting ship checks, writing repair work items/specifications, and estimating labor, material and subcontractor work at the paragraph and line-item level for U.S. Navy Ship repair work, alterations, and modifications. Candidates shall be capable of assessing ship’s material condition, by conducting ship checks, researching ships documents, analyzing ships conditions and tests, and determining scope of work required by reviewing and validating Work Notifications (2-Kilos). Candidates shall also be capable of interpreting and using all technical and material information available in Navy, Shipbuilder and Manufacturer drawings, technical manuals, documents, or Equipment Manufacture’s data and/or other pertinent commercial data to identify repair and modification requirements and to identify, price and order materials. Candidates will develop work items/specifications in accordance with NAVSEA 4-E requirements by utilizing NAVSEA instructions and pertinent NAVSEA Standard Items, and Class and Local Standard Work Templates. Candidate should be familiar with working in the Navy Maintenance Database (NMD) and using available application programs to develop work items/specifications and labor, material, and cost estimates in accordance with NAVSEA instructions and directives. All Planner/Estimators will conduct ship checks when required. Job Requirements/Skill Sets: Candidates must have knowledge of U.S. Navy ship construction, shipboard systems, equipment, and their operations, and have some experience with developing production planning documents and estimates for work executed at U.S. Navy depot level surface ship maintenance and modernization facilities. Candidates must have strong oral and written communication skills. Trade Journeyman work experience or equivalent in a Naval Repair Facility or Commercial Shipyard that specializes in U. S Navy Ship repairs and alterations is preferred. Experience as a Planner, Estimator or Shipbuilding Specialist at Supervisor of Shipbuilding, Conversion and Repair (SUPSHIP) commands, Regional Maintenance Centers (RMCs), Navy Central Planning Activities, Planning for Engineering and Repair Activities at public or private shipyards or other ship repair companies is preferred. U.S. Navy active-duty experience is preferred. Education Requirements: Individual shall have a high school diploma/GED. An Associate’s degree or higher is preferred. Security Clearance/Naval Facility Access: U.S. citizenship required. Must be eligible for and be able to maintain a U.S. Secret Clearance. Must be able to access military facilities, naval shipyards, and private shipyards. Q.E.D. offers competitive benefits such as: Paid Leave, Medical, Dental, Vision, Short/Long Term Disability, 401(k) retirement plan, Basic Life Insurance, supplemental insurances, and Employee Assistance Program. EOE, including disability/vets: QED is an equal opportunity employer.

Job Description Job Description: QED Systems, Inc., a ship repair company, has an opening for a Marine Welder/Brazier. The individual will report directly to the Project Supervisor who is leading a team of tradesmen installing Ship Alterations on U.S Navy ships. Job Requirements/skill sets: • Minimum of 5 years of shipyard Welding or Brazing experience., • The candidate must have a current or prior NAVSEA, ABS, or AWS certification in at least two welding processes (SMAW, FCAW, GMAW, or GTAW) and two base metals (OSS, HY, SS, AL, or CuNi)., • The candidate must pass a welding practical test and workmanship written exam which will be administered prior to hire., • The candidate must be able to interpret NAVSEA technical drawings and understand welding symbols on drawings., • Must be able to carry heavy equipment up to 50 pounds, such as welding machines, gas bottles, and fire extinguishers., • Must have experience using hand tools, power tools, and shop machinery., • Experience with a plasma cutter is a plus., • Must be able to work aboard ships and under industrial repair conditions, work in confined spaces, climb vertical & inclined ladders, and follow safety regulations., • Will be required to wear personal protective equipment (PPE), such as eye protection, hard hat, hearing protection, and safety shoes., • Must provide own set of welder’s personal protective equipment (PPE). Security Clearance/Naval Facility Access: U.S. citizenship required. Must be able to access military facilities, naval shipyards, and private shipyards. Must have a government issued ID card (such as a REAL ID or a U.S. passport or passport card). Q.E.D. offers competitive benefits such as: Paid Leave, Medical, Dental, Vision, Short/Long Term Disability, 401(k) retirement plan, Basic Life Insurance, supplemental insurance, and Employee Assistance Program. EOE, including disability/vets: QED is an equal opportunity employer.

Job DescriptionOUR CORE PILLARS: Safety | Operational Excellence | Shareholder Value Propulsion Controls Engineering has a job openings for an Outside Machinist Lead, with a minimum 6 years of marine and/or shipyard experience preferred; at our San Diego, CA location. PCE is a full service electro-mechanical repair and diesel repair contractor. PCE has garnered a wealth of extensive experience in successfully executing major system overhauls across numerous ports throughout the world on virtually every class of ship currently in operation. Job Summary / Outside Machinist Lead: Installs, maintains, and repairs ship’s main propulsion and auxiliary systems including, but not limited to: Steam, Gas Turbine, Diesel propulsion, propulsion shafting, propellers, rudders, Air Conditioning and Refrigeration, and steering systems. Installs, maintains, and repairs ship’s sub-systems including, but not limited to: pumps, compressors, purifiers, heat exchanges, hydraulic/electric motor operators, valves, fluid control components/assemblies, and fluid/air/hydraulic systems. Tests installed equipment to ensure system meets specifications. Installs and tests various shop equipment. Essential Functions: • Provides organization and leadership for crew(s) within PCE’s facility and/or at assigned work-sites., • Ensures/provides training to junior personnel in shop/shipboard procedures, inspection, operation, and repair/overhaul of related equipment and/or systems., • Interfaces with associated trades, contractors, sub-contractors, vendors, customers and schedulers as necessary to ensure effective and efficient accomplishment of assigned task(s) and milestones., • Ensures proper identification and availability of necessary equipment and material to accomplish scheduled work and meet all milestones., • Attends daily production, planning, and/or progress meetings as assigned, providing accurate, up-to-date, and knowledgeable planning or status inputs in a clear and concise manner., • Ability to accurately write Condition Found Reports, detailing results of inspections, tests, noted discrepancies, and recommendations as necessary to include pricing of associated parts and labor., • Accurately interprets and preforms work in accordance with designated Process Control Procedure(s) (PCP)., • Knowledgeable in Navy WAF and Tag Out systems; able to develop, submit, and / or close out WAFS, to include verification and concurrence of all tag out requirements necessary to safely perform work., • Able to effectively read and comprehend work specifications, technical manuals and standards, NAVSEA Standard Items, blueprints, and drawings., • Able to communicate effectively in both verbal and written forms. Education: • Minimum 6-10 years experience in ship repair., • Extensive knowledge of shipboard equipment, systems and subsystems., • Knowledge of NAVSEA Standard Items and applicable NSTMs., • Efficient in machinery alignment processes using laser and dial indicator methods. OUTSIDE MACHINIST LEAD EEO/AA/Vet/Disabled #zr

Job Description AUTHORITIES / RESPONSIBILITIES: * Supports Project Management with the coordination and completion of quality inspections. * Directs aspects of quality management associated with specific area of assigned responsibility. * Supports resolution of quality issues that may arise between installation team members, sub-contractors, and shipyard and government personnel. * Provides input into the development of test index plans, QA workbooks, and process control procedures. * Implements and maintains vessel specific inspection plans and requirements per applicable contract requirements or as assigned. * Monitors task performed by sub-contractors or Quality Department employees assigned to west coast projects for short-term assignment. * Monitors craft work to ensure workmanship is in accordance with regulatory, NAVSEA standard Items and shipbuilding standards. * Conducts quality assurance checks, inspections, and final product inspections as assigned. * Performs in-process quality assessments, including compliance audits prior to customer inspection utilizing visual or other inspection methods. * Generates, maintains and audits documentation related to inspections performed, e.g. call outs, sign-off sheets, test procedures, objective quality evidence (OQE). * Complies with the employee handbook general guidelines, company procedures and policies. * Complies with Quality Management direction and reporting requirements as directed; performs auditing of the Quality Management System in accordance with ISO 9001: 2015 or similar. * This position description is not intended to be all-inclusive. Incumbent will perform other tasks as assigned. * Offsite travel could potentially be in excess of 35%. Training to support this position may also include travel. QUALIFICATIONS / KNOWLEDGE / EXPERIENCE: * Completion of trade school or apprentice program in electrical or fabrication preferred. * Five (5) or more years of experience working in a related trade with three (3) being in shipbuilding/ship repair. * Five (5) years’ experience in QC/QA inspections, four (4) years’ experience maintaining current Level II Visual Testing (VT) accepted. * Must be NDT Level II VT qualified within 90 days. * Must be NDT Level II Penetrant Testing (PT) qualified within 120 days. * Familiar with NAVSEA standard items. * Strong leadership and organization skills. * Computer skills utilizing Microsoft Word, Excel and Outlook. *

Job Description Location: San Diego, CA, US Company: Standard Ship Repair Level of Experience: Any Level Reports to: Foreman Salary Status: Hourly - Non-Exempt Job Description: Structural Welders join metal components as specified by layout, blueprints, diagram, work order, welding procedures, or verbal instructions, using hand and powered hand tools, and welding equipment. They must be familiar with OSHA requirements for safety and hot work onboard naval vessels. Duties include, but are not limited to: • Successfully completion welding qualification requirements using Shielded Metal Arc Welding (SMAW) and Flux-Cored Arc Welding (FCAW) using ceramic backing., • Setup and adjust various welding equipment and associated accessories., • Ability to interpret welding symbols-based on the AWS Welding Symbols., • Familiarity with the workmanship requirements of MIL-STD-1689A, Fabrication, Welding, and Inspection of Ships Structure. Education / Experience Required: • Must be 18 years old., • Must be able to work in the US., • High School Diploma or equivalent., • Completed a structured welding program., • Must have a valid California driver's license., • Must be able to obtain a DBIDS credentials., • A plus, previous experience in a ship repair environment. Work Environment: This job operates in a shipyard work environment. Travel: This position does require ability to travel. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be available to work at heights, confined spaces and have ability to climb staircases and ladders of varying sizes. May involve carrying objects that weigh up to 50 lbs., frequent stooping, bending, crawling, reaching, and walking. Work Authorization/Security Clearance (if applicable) • Completion of a satisfactory background check, • Passing a drug test and physical examination, • Eligibility to work in the US., • Obtaining DBIDS level security clearance. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. AAP/EEO Statement Standard Ship Repair is an Equal Opportunity Employer: minority/female/disability/veteran/sexual orientation, encouraging diversity in the workplace and a drug-free workplace. Completion of a satisfactory background check. Must pass a drug test and physical examination.

Job DescriptionLabor One is hiring Journey-Level Pipefitters for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (956)382-2631 (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM Position Overview: As a Pipefitter Journeyperson, you will be responsible for the layout, fabrication, installation, repair, and testing of various marine piping systems such as Auxiliary Salt Water, Fire Main, Potable Water, Hydraulic, Compressed Air, Fuel Oil, Lube Oil, and Engine Exhaust systems. You will work according to specifications, NAVSEA/Military standards, and other regulatory standards like ABS and Military Sealift Command. Key Responsibilities: -Remove, repair, target, fabricate, and install marine piping systems in accordance with regulatory standards. -Use equipment such as table saws, pipe threading machines, bending machines (power and hand-operated), drill presses, and brazing equipment. -Perform blanking and pressure testing of tanks (structural boundary testing). -Interpret and follow instructions, drawings, and work item specifications. -Provide direction and guidance to helpers and improvers as assigned by the supervisor. Qualifications & Experience: -5-10 years of experience in pipefitting, with at least 6 years of experience in maritime pipefitting. -Strong knowledge of P-73 joint fit-up and Silver Brazing theory. Ability to certify in: -MT Braze (B-1) -MT Braze (B-2) -Thorough understanding of marine pipe fabrication, repair processes, and targeting. -Capable of interpreting drawings, specifications, and Navy/MSC/ABS standard items and manuals. -Proficiency in basic math (addition, subtraction, multiplication, division) and familiarity with both U.S. customary and metric measurement systems. -Physically and medically capable of wearing all required PPE, including hard hats, respirators, safety harnesses, and other safety gear as per OSHA standards. Work Environment: You will work in shipyards, aboard vessels, or industrial settings, performing pipefitting tasks on complex marine systems. The role demands precision, adherence to safety standards, and the ability to collaborate effectively with a team. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description OUR CORE PILLARS: Safety | Operational Excellence | Shareholder Value Propulsion Controls Engineering has a job openings for Outside Machinist Journeyman, with a minimum 5 years of marine and/or shipyard experience preferred; at our San Diego, CA location. PCE is a full service electro-mechanical repair and diesel repair contractor. PCE has garnered a wealth of extensive experience in successfully executing major system overhauls across numerous ports throughout the world on virtually every class of ship currently in operation. Job Summary / Outside Machinist: Capable of accomplishing the installation, maintenance, and repair of ship's propulsion and auxiliary systems including, but not limited to Steam, Gas Turbine, and Diesel propulsion systems, rudders and steering gear, elevators, and deck equipment without Supervision. Capable of accomplishing the installation repair, and maintenance of ship's fluid systems which include pumps, compressors, purifiers, heat exchangers, actuators and valves without Supervision. Analyze defects and adjusts or repairs electrical mechanical systems of outboard motors. Disassembles and inspects motor for defective parts, using mechanical hand tools. Replaces parts like gears., magneto points, piston rings and spark plugs and reassembles engine. Capable of accomplishing the testing of equipment to ensure systems meet 4E specifications, references and drawings without Supervision. Capable of accomplishing the installation and testing of various shop equipment. Must have ability to follow repair references and drawings and be proficient in the use of precision measuring equipment. Performs other related tasks as assigned, some of which may become essential to the position. Job Requirements and Experience / Outside Machinist: • Must be 18 years of age or older to apply., • Minimum 5 years of marine and/or shipyard experience preferred., • Health Insurance (medical, dental, vision, company paid life insurance, voluntary plans such as supplemental life insurance, critical illness, and hospital indemnity), • Paid Time Off, • Company paid holidays, • Retirement savings plan (401(k) plan with company matching and an Employee Stock Ownership Plan OUTSIDE MACHINIST JOURNEYMAN EEO/AA/Vet/Disabled #zr Copyright © 2024, ADP, Inc. All rights reserved.Privacy|Legal|Requirements|Artificial IntelligencePowered by

Job Description Location: San Diego, CA, US Company: Standard Ship Repair Additional Locations: Bremerton, WA, US Level of Experience: Experienced Reports to: General Manager Salary Status: Hourly / Non-Exempt Summary/Objective: A shipyard Marine Chemist focuses on ensuring safe work environments for hot work, confined space entry, and other tasks involving potentially hazardous materials. Marine Chemist analyze the air quality, identify potential hazards, and certify spaces as safe before work can begin. Marine Chemist have a critical role in preventing fires, explosions, and toxic exposures in shipyard settings. Duties include, but are not limited to: • Identify air quality using specialized equipment to test air in confined spaces for the presence of harmful gases, vapors, and other contaminants., • Certify tanks and spaces as safe to enter after use, ensuring they are gas-free before hot work (Welding, etc.) can begin., • Identify potential hazards, including chemicals, flammable materials, and environmental risks, to ensure compliance with regulations., • Collect and analyze samples from ships and shipyards to assess air quality, identify contaminants, and ensure compliance with regulations., • Assist in developing and implementing safety protocols and procedures, including emergency response plans., • Maintain detailed records of work, prepare reports, and communicate findings to relevant parties., • Will be involved in training personnel on proper safety procedures and providing consultation on hazardous materials management. Education / Experience Required: • While a bachelor's degree in chemistry or a related field is often preferred, a strong background in chemistry and industrial hygiene, along with 1-2 years work experience, can be sufficient., • Understand the Naval Ship Repair requirements and working environment., • Experience in shipyards, particularly with confined space entry, hot work, or industrial hygiene, is highly valued., • Strong analytical, problem-solving, and communication skills are essential., • Proficiency in standard office computer software. Work Environment: This job operates in an office environment and shipyard work environment. Travel: This position may require ability to travel. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must have the ability to enter confined spaces and work in potentially hazardous environments requires physical stamina and the ability to wear personal protective equipment. Work Authorization/Security Clearance (if applicable) • Completion of a satisfactory background check, • Passing a drug test and physical examination, • Eligibility to work in the US., • Obtaining DBIDS level security clearance. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. AAP/EEO Statement Standard Inspection Services is an Equal Opportunity Employer: minority/female/disability/veteran/sexual orientation, encouraging diversity in the workplace and a drug-free workplace. Completion of a satisfactory background check. Must pass a drug test and physical examination.

Job Description Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices all over the country. We partner with businesses as well as jobseekers to place individuals into positions efficiently. We are currently in need of Outside Machinists to join our team in San Diego, CA. Pay Rate: $25-35/hour Responsibilities: • Install equipment on naval vessels in a safe and productive manner., • Disassemble, fault find, repair and reassemble shipboard equipment as directed by the supervisor., • Inspection of work, identification of potential problems, initiation of corrective actions., • Increase awareness of quality procedures within department, • Ensure adherence to correct work procedures., • Continuously improve communications and flexibility within the team., • Contribute to innovation/productivity improvements., • Read technical bulletins and diagrams in relation to work being performed., • Work towards the team goal of delivering the vessel on time., • Minimum 2 years of shipyard or Naval (machinist mate) experience., • DBIDS eligibility required., • Must have reliable/own transportation., • Must be fire watch certified., • 11 panel Drug Screen, • Comfortable with heights, • Lift 50lbs without assistance, • Must understand the layout of the ship and compartment identification., • Basic reading, writing and math skills required., • Strong mechanical aptitude required., • Knowledge of ship terminology required., • Proven ability to interpret engineering drawings., • Demonstrated ability to safely operate all fixed and non-fixed machinery., • Ability set up machinery to meet flatness tolerance requirements., • Demonstrated ability to interpret job specifications., • Ability to perform work on marine vessels., • Must be able to follow directions and work with limited supervision. CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Voluntary Life/Voluntary AD&D, • Short-Term Disability, • Long-Term Disability, • Hospital Indemnity, • Accident, • Critical Illness Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

Job Description Pipefitter (San Diego, CA) Lead Marine San Diego San Diego, CA, USA Full Time $28.00-$42.00 per hour (Per Diem available for non-locals) Must be open to all shifts Lead Marine has immediate openings for Journeymen Pipefitters for the Shipyard Industry here in San Diego. This Pipefitter job will be working on Naval Bases & Shipyards. DBIDs badge in hand is a plus. Pay is dependent on skills and capability. Qualified candidates please apply now! Responsibilities: • The pipefitters will be responsible for removing, repairing, targeting, laying out, fabricating and testing marine piping systems such as auxiliary salt water, fire main, potable water, hydraulic, compressed air, fuel, oil, engine exhaust in accordance with NAVSEA/Military standards and drawings., • Run lines and leads required to accomplish work and accomplish drop test if using flammable or oxygen depleting gases., • Repair and fabricate by using various shop equipment such as table saws, pipe threading machines, bending machines (power and hand), drill presses and brazing equipment., • Pipefitters must able to read and interpret marine blueprints, drawings and schematics., • Pass and preform Silver Brazing on Copper Nickel, • Must have a comprehensive knowledge of ship repair terminology and ship compartment., • Must possess a comprehensive knowledge of equipment and work processes used in marine pipe fabrication, repair, and targeting. Benefits: • Health insurance, • Paid holidays, • Paid sick leave To see a list of more available jobs, please visit Company DescriptionOur mission is to be the Best In Class manpower support company by operating on the principals of delivering the highest level professionalism, integrity, honesty, and safety to our valued employees and clients. Lead Staffing, established in 2010, specializes in Construction, Industrial and Marine Staffing of Skilled Tradespeople throughout the United States of America. Our goal is to work with regional and national contractors that share our commitment towards safety and to provide long term rewarding work assignments for our valued employees. Our success in consistently filling our customer's orders is directly related to the tenure of our sales and recruiting staff, all of whom on average have in excess of 10 years industry experience. LEAD is proud to be an Equal Opportunity and Affirmative Action Employer. LEAD is committed to providing an environment of mutual respect where employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy (including childbirth, lactation and related medical conditions), national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information (including characteristics and testing), military and veteran status, and any other characteristic protected by applicable law. We believe that diversity and inclusion among our teammates is critical to our success as a growing national company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool.Our mission is to be the Best In Class manpower support company by operating on the principals of delivering the highest level professionalism, integrity, honesty, and safety to our valued employees and clients.\r\n\r\nLead Staffing, established in 2010, specializes in Construction, Industrial and Marine Staffing of Skilled Tradespeople throughout the United States of America. Our goal is to work with regional and national contractors that share our commitment towards safety and to provide long term rewarding work assignments for our valued employees.\r\n\r\nOur success in consistently filling our customer's orders is directly related to the tenure of our sales and recruiting staff, all of whom on average have in excess of 10 years industry experience.\r\n\r\nLEAD is proud to be an Equal Opportunity and Affirmative Action Employer. \r\n\r\nLEAD is committed to providing an environment of mutual respect where employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy (including childbirth, lactation and related medical conditions), national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information (including characteristics and testing), military and veteran status, and any other characteristic protected by applicable law. We believe that diversity and inclusion among our teammates is critical to our success as a growing national company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool.