Small electrical jobs in Inglewood, California - Page 2Create job alerts

Job DescriptionDescription: What we do Wescom Solutions provides systems engineering, construction management, and operations support services to the rail transit industry. Our mission is to help transit authorities enhance their system capabilities, capital program execution and operational efficiencies in the safest, and most time- and cost-efficient manner. Why Wescom Solutions At Wescom Solutions we're not just offering a job; we're inviting you to be a crucial part of our dynamic culture. Here's why working with us is a unique and rewarding experience: Make a Real Impact: Position Summary Wescom Solutions is seeking a Traction Power Engineer for support on major rail construction projects. Essential Duties and Responsibilities • Support our clients and assist in solving issues related to traction power and high voltage electrical systems including but not limited to design, construction, testing and commissioning, and operations, • Coordinate with a variety of stakeholders throughout the design process and come up with acceptable solutions as the design evolves, • Review and provide input into project requirements as they relate to scope, specifications, schedule and cost estimates, • Develop complete electrification systems as requested by the client, including operations, system requirements, plans and specifications, • Review contractor’s product submittals and shop drawings and respond contractor’s request for information, • Inspect the condition of electrical equipment in the field and make recommendations related to required electrical upgrades, • Perform site investigations, undertaking site surveys and quality assurance inspection, • Assist with equipment installation, testing and commissioning efforts, • Support troubleshooting, evaluate, and provide solutions, • Assist with the creation of proposals, scope and cost estimates, • Ensure that engineering work complies with relevant local safety standards, project procedures and the quality assurance plan, • A Bachelor’s degree in Electrical Engineering or related technical discipline, • Minimum 5+ years of Electrical Engineering experience with 2+ years of experience designing ac and/or dc traction power electrification systems, • Professional Engineering License preferred, • Experience with Traction Power systems for Light Rail and Third rail systems, and Streetcar projects, • Extensive knowledge and experience with the design and implementation of DC systems (600/750/1000/1500V), AC systems (12.5/25KV), grounding and EMI/EMC systems including but not limited to traction power and substation design, modeling and simulations, preliminary design, detailed design, engineering support services during construction, field testing, and traction power equipment commissioning, • Strong electrical analysis experience performing traction power and AC power load flow, short circuit calculations, protection coordination, relay coordination studies, arc flash calculations, ground grid calculations, cable sizing and cable pulling tension calculations using ETAP and/or SKM Power Tools, • Knowledge of industry/regulatory codes and standards (CSA, OPSS, NEC, NFPA, AREMA and IEEE or other applicable standards), • Experience in using CAD design software (AutoCAD, Civil 3D, Revit or equivalent), • Strong interpersonal, written and oral communication skills when interacting with others, ability to explain project technical information to both technical and non-technical audience, • Proficient self-leadership with attention to detail, accuracy, and prioritization of responsibilities in a dynamic work environment, • Ability to learn new techniques, perform multiple tasks simultaneously, follow instruction, and comply with company policies, • Ability to work independently with minimal supervision, as well as part of a team to meet business objectives Wescom Solutions is an Equal Opportunity Employer, drug free workplace, and complies with ADA regulations as applicable.

Job Description Icarus was founded on the belief that the Stratosphere is the Forgotten Frontier and that reclaiming it will define the next era of aerospace and what is possible from the sky. We build solar-powered aircraft that fly at 60,000 ft for weeks at a time, delivering persistent, affordable, and scalable presence from this layer of the atmosphere. Mission Re-establish and maintain dominance in the Stratosphere. What you'll do • Design and fly high-reliability avionics for stratospheric aircraft, • Own electrical subsystems from concept to flight, • Build, bring up, debug, and iterate fast, • Support integration, production, and flight ops, • Work closely with mechanical, GNC, RF, and software teamsWhat we're looking for, • 2+ years building real electronic hardware, • Strong fundamentals in EE and first-principles thinking, • Experience with power electronics, avionics, or high-reliability systems, • Comfortable moving fast, owning outcomes, and debugging in the fieldWhy Icarus, • Meaningful equity, • Top market salary and bonuses, • Health, dental, and vision insurance, • Factory in El Segundo, • Real ownership, real hardware, real flight, • Small team, massive responsibility, • High signal (engineering) to noise (management) culture, • Dream desk setup, • Daily lunch, • Unlimited celsiusThis is not a normal engineering job, • We are pioneers, not corporate managers. Icarus deliberately optimizes for a high signal (engineers) to noise (management) ratio, where engineering, flight, and execution matter more than process, politics, or management overhead, • You will work side by side with the CEO and a small team of world-class builders. You will own your subsystem end to end. Design it. Build it. Break it. Fix it. Validate it in the desert. Fly it. Then do it again, faster, • We expect full extreme ownership. This is a high-trust, no-BS team, and everyone pulls their weight, • We are hiring across the stack: mechanical, aerodynamics, RF, GNC, electrical, avionics, power electronics, energy storage, software, and systems, • We want builders. No hand-holding. No fluff. No fake projects. No slide decks. No sitting in meetings all day. Just raw engineering, real hardware, and real flight, • You must thrive under pressure, learn fast, troubleshoot in the field, and push hardware to its limits. We move fast. We go to Mojave at 4 am in the morning. We expect results and an obsession with quality and speed, • Technical interview, • One-on-one with CEO The salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are considered part of Icarus' total compensation package. We're an equal opportunity employer. We welcome all applicants without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

Job DescriptionDescriptionAs a Test Automation Engineer at Impulse, you will own all aspects of test and automation software design, implementation and operation while working closely with a fast paced, agile team. Responsibilities • Work on a full spectrum of software, including near-real time data acquisition and control software to user-facing GUI’s and tools., • Actively work with the test operations team that uses your software daily to support testing operations., • Take part in the complete test program lifecycle including design, integration, testing, deployment, debugging, and finding novel solutions to late-breaking changes or issues., • Design and develop software and tools in support of testing operations., • Review code written by others, and write reviewed code yourself., • Work onsite in a fast-paced, challenging environment., • Resolve technical issues with innovative and resourceful solutions. Minimum Qualifications • Bachelor’s degree in engineering, computer science or related field., • 2+ years' of demonstrated proficiency with python, or an object-oriented programming language & demonstrated hands-on experience operating the software., • Experience developing user-facing software applications related to networking, hardware control and data acquisition., • Experience with software best practices and workflows, including git. Preferred Skills and Experience • Demonstrated ability of taking project ownership and working well in small teams., • Proficient with basic principles of data acquisition and control., • Master’s degree in electrical, software, mechanical, or aerospace engineering., • Familiarity with Propulsion Systems development testing., • LabVIEW certification (CLAD, CLD, CLA)., • Experience with Real-Time Operating Systems., • Hands-on experience with design, build, and operation of electrical systems. Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionSENIOR MECHANICAL ENGINEER (SITE INFRASTRUCTURE) Freeform builds AI-native manufacturing systems that unify software, hardware, and physics to produce industrial-scale parts at the speed of human ideation. By treating manufacturing as a single integrated system, we unlock a new era of innovation where complex hardware is designed, built, and scaled without limits. As a Senior Mechanical Engineer (Site Infrastructure) at Freeform, you will have the unique opportunity to bridge the gap between site infrastructure and next-generation autonomous manufacturing. You will deep dive into the complex mechanical systems that power Skyfall, our proprietary printing platform, ranging from industrial fluid and cooling systems, high-pressure gases, and factory performance monitoring systems leveraging sensors and data acquisition. This work is critical to the ultimate goal of enabling Freeform to deploy and scale its hardware stack globally. You will work alongside an interdisciplinary team of engineers to create custom solutions that ensure Freeform's physical infrastructure is as advanced as the software driving it. The ideal candidate possesses a "no job too big or small" mentality and is a proactive problem-solver dedicated to accelerating the pace of innovation. 3D printing experience is not required to be successful here - we look for leaders who are organized, accountable, collaborative, and motivated to build and scale world-class hardware operations. Responsibilities: • Design and implement custom infrastructure for our next-gen printing system, Skyfall, including state-of-the-art thermal management (chillers), industrial plumbing, and high-flow gas delivery, • Develop and integrate factory performance monitoring systems, leveraging sensors and data acquisition (DAQ) to ensure real-time visibility into utility health, pressure levels, and flow rates, • Oversee critical utilities, ensuring power, process water, and industrial gases like nitrogen and argon are supplied to the Skyfall fleet in strict accordance with safety codes, • Define and implement preventive maintenance for facilities equipment (pumps, compressors, and HVAC) to optimize operational efficiency and minimize system downtime with a pragmatic eye for automation opportunities, • Secure the availability of specialized fluid system components and high-pressure fittings to ensure that infrastructure build-outs and engineering projects always move at the pace of innovation Basic Qualifications: • Bachelor's degree in mechanical or aerospace engineering or similar engineering discipline, • 5+ years of facilities engineering, factory engineering, launch/ground systems engineering or similar experience, • Strong first principles understanding of fluid mechanics, thermodynamics, and heat transfer, • Hands-on ability to troubleshoot and repair complex mechanical and fluid systems Nice to Have: • Experience with Environmental, Health, and Safety (EHS) practices, specifically regarding high-pressure gas safety (NFPA 55) and metal powder handling, • Proficiency in 3D CAD software (SolidWorks, NX, or similar) for designing facility layouts, piping routes, and custom mechanical mounts, • Experience developing infrastructure for high-volume production or scaling automated manufacturing lines, • Hands-on experience with industrial automation controls, PLCs, or building management systems (BMS), • Background in aerospace ground support or rocket engine test site operations involving cryogenic or high-pressure fluid systems, • Experience with new facility buildouts, including managing external MEP (mechanical, electrical, plumbing) contractors, • Knowledge of ITAR, ISO 9001, and/or similar industrial compliance standards, • Experience with metal additive manufacturing or similar powder-based industrial processes, • Excellent verbal and written communication skills with the ability to present technical infrastructure plans to cross-functional teams Location: * Based in Hawthorne, our vertically integrated facility brings technology development, R&D, and production together under one roof. We operate at the center of LA's deep tech ecosystem, surrounded by some of the most ambitious hardware innovation happening anywhere in the country. What We Offer: • We have an inclusive and diverse culture that values collaboration, learning, and making deliberate data-driven decisions., • We offer a unique opportunity to be an early and integral member of a rapidly growing company that is scaling a world-changing technology., • Benefits, • Significant stock option packages, • 100% employer-paid Medical, Dental, and Vision insurance (premium PPO and HMO options), • Life insurance, • Traditional and Roth 401(k), • Relocation assistance provided, • Paid vacation, sick leave, and company holidays, • Generous Paid Parental Leave and extended transition back to work for the birthing parent, • Free daily catered lunch and dinner, and fully stocked kitchenette, • Casual dress, flexible work hours, and regular catered team building events, • Compensation, • As a growing company, the salary range is intentionally wide as we determine the most appropriate package for each individual taking into consideration years of experience, educational background, and unique skills and abilities as demonstrated throughout the interview process. Our intent is to offer a salary that is commensurate for the company's current stage of development and allows the employee to grow and develop within a role., • In addition to the significant stock option package, the estimated salary range for this role is $100,000-$200,000, inclusive of all levels/seniority within this discipline., • Freeform is an Equal Opportunity Employer that values diversity; employment with Freeform is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Engineering Technician Radiant is seeking a Engineering Technician who will have the opportunity to apply a variety of skillsets while fabricating and assembling our development microreactor unit. Additionally, you will be instrumental in building large and small-scale test rigs, making prototype parts and tooling, sourcing tools to execute builds, material handling, and more. You will be the fourth foundational technician team member at Radiant with a high degree of autonomy and initiative is needed. You will build and maintain our prototype shop in our new El Segundo headquarters and use a variety of tools as it comes to shop activities (Machining, welding, metal forming, electrical work, plumbing). You’ll have the opportunity to bring significant technical contribution to the team and lead us to the successful fueling of a new reactor design in over 50 years by 2026. Responsibilities and Duties: * Fabricate piece parts to print using shop equipment: mill, lathe, welders, metal forming tools, hand tools, etc. * Own the assembly and commissioning of test rigs and production builds. * Perform troubleshooting and root cause investigation of mechanical, electrical, thermal, and pneumatic issues. * Partner and collaborate with engineers to develop solutions and improvements for hardware design, fabrication, and assembly. * Abide by a high level of operational standards regarding safety, reliability, and cleanliness. * Perform other tasks as needed. We are a small company, and you may need to perform tasks outside your normal duties and responsibilities. Required Skills and Qualifications: * High school diploma or equivalent certificate. * 3+ years of fabrication or assembly work experience. * Positive attitude and able to work well on a team. * Able to work independently and efficiently with minimal supervision. * Able to stay organized and strong attention to detail. * Able to use traditional inspection tools for the inspection of parts and assemblies. * Able to read mechanical drawings and interpret tolerances. * Able to read and interpret fluid or electrical schematics. * Experienced in manufacturing with the use of machine tools, saws, grinders etc. * Physical effort including standing, lifting, and carrying equipment up to 50 lbs. unassisted. * Able to work in outdoor environments as needed. * Ability to work at elevated heights occasionally (scissor lifts, ladders, etc.) * Ability to travel on occasion for offsite support. Desired Skills and Qualifications: * Experience operating and working with high pressure and temperature systems. * Experience with MIG and TIG welding. * Experience with CNC programming and manual machine operation. * Experience with GD&T interpretation preferred. * Knowledge/experience working with electrical components and high voltage systems. * Experience operating safely in shop environments. * Experience lifting, rigging, and preparing for heavy crane operations of complicated parts. * Proficient computer skills; comfortable with using email and the Microsoft Office suite. Additional Requirements: * Must be willing to work extended hours and weekends as necessary to achieve company goals. * Must work 100% onsite at El Segundo HQ. Benefits and Perks * Stock: Substantial incentive stock plan for all full-time employees. * Medical: 100% up to base silver level plan for employee + 50% dependents, offers up to Platinum plans. * One Medical: Sponsored memberships for employees and their dependents. * Vision: 100% top tier plan coverage + 50% for dependents. * Dental: 100% top tier plan coverage, orthodontia extra, 50% for dependents. * Voluntary life, accident, hospital, critical illness, commuter and FSA/HSA are offered as employee contributed benefits. * 8-weeks of paid parental leave for all parents. Additional paid pregnancy leave for CA employees. * Daily catered lunch. Free snacks and drinks. * Flexible PTO policy. Remote workday allocation. * Company and team-bonding events, happy hours and in-person camaraderie. * Beautiful El Segundo headquarters close to the Pacific Ocean. Total Compensation and Benefits Radiant compensates people for impact and invests in those who continue to raise the bar. Radiant’s new hire compensation package includes base salary, substantial equity grants, and comprehensive health benefits. Total compensation and level are determined through a rigorous evaluation of interview performance, experience, education, and qualifications, and are designed to support continued growth as scope, responsibility, and impact expand at Radiant. The best of today’s advanced reactor builders don’t wait for job postings. They join the winning team. If that’s you, contact us directly for immediate opportunities: . We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. Unfortunately, we are unable to provide visa sponsorship at this time. This position involves access to technology that is subject to U.S. export controls. Any job offer made will be contingent upon the applicant’s capacity to serve in compliance with U.S. export controls.

Job Description Responsibilities and Duties: * Read engineering drawings, electrical schematics, and wiring diagrams. * Assemble, wire, and integrate hardware including PCBs, harnesses, electrical panels, and enclosures. * Complete work according to procedures and specifications. * Collaborate with engineers to develop and document processes. * Expert using manufacturing tools including but not limited to soldering irons, cutters, strippers, crimpers, and torque wrenches. * Familiarity with electromechanical testing including continuity, hi-pot, and pull test. * Abide by a high level of operational standards regarding safety, reliability, and cleanliness. * Understand the basics of electrical hardware and how to interact with it safely. Required Skills and Qualifications: * Previous experience with military/aerospace grade electronics. * Experience with high-power electronics and batteries. * Knowledge of production equipment and tooling to build out a functional electromechanical manufacturing floor. * Ability to flex to projects in support of near-term company goals. * Experience with NASA-STD-8739.4, IPC-A-610, IPC-A-620. * Experience with UL-508A, NFPA-70 (NEC). Preferred Requirements: * Standing, bending, and working with small components for extended periods. * Good vision and fine motor skills for precision electrical assembly work. * Ability to lift up to 50 lbs occasionally. * Excellent teamwork, communication, and organizational skills. * Positive attitude and able to work well on a team with minimal oversight. * Able to stay organized and strong attention to detail. * Able to work in outdoor environments as needed. * Ability to work at elevated heights occasionally (scissor lifts, ladders, etc.) * Ability to travel on occasion for offsite support. Additional Requirements: * Must be willing to work extended hours and weekends as necessary to accomplish our mission. * Must work 100% onsite at El Segundo HQ. Benefits and Perks * Stock: Substantial incentive stock plan for all full-time employees. * Medical: 100% up to base silver level plan for employee + 50% dependents, offers up to Platinum plans. * One Medical: Sponsored memberships for employees and their dependents. * Vision: 100% top tier plan coverage + 50% for dependents. * Dental: 100% top tier plan coverage, orthodontia extra, 50% for dependents. * Voluntary life, accident, hospital, critical illness, commuter and FSA/HSA are offered as employee contributed benefits. * 8-weeks of paid parental leave for all parents. Additional paid pregnancy leave for CA employees. * Daily catered lunch. Free snacks and drinks. * Flexible PTO policy. Remote workday allocation. * Company and team-bonding events, happy hours and in-person camaraderie. * Beautiful El Segundo headquarters close to the Pacific Ocean. Total Compensation and Benefits Radiant compensates people for impact and invests in those who continue to raise the bar. Radiant’s new hire compensation package includes base salary, substantial equity grants, and comprehensive health benefits. Total compensation and level are determined through a rigorous evaluation of interview performance, experience, education, and qualifications, and are designed to support continued growth as scope, responsibility, and impact expand at Radiant. The best of today’s advanced reactor builders don’t wait for job postings. They join the winning team. If that’s you, contact us directly for immediate opportunities: . We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. Unfortunately, we are unable to provide visa sponsorship at this time. This position involves access to technology that is subject to U.S. export controls. Any job offer made will be contingent upon the applicant’s capacity to serve in compliance with U.S. export controls. Compensation Range: $36 - $50

Job Description Perception & Sensing Engineer - Elevate Space Defense with Cutting-Edge Technology! El Segundo, CA | On-site Opportunity Summary Join a trailblazing team at the forefront of space defense innovation. We are seeking a dynamic Perception & Sensing Engineer to lead the integration and development of advanced sensing systems crucial to autonomous orbital interceptors. This role is pivotal to ensuring our interceptors navigate complex environments accurately. You'll collaborate closely with the founding team, contribute to essential test experiments, and see your work come to life in high-stakes applications. Backed by seed funding, this is a chance to be part of a rapidly evolving field with a direct impact on national security. About Us We are a cutting-edge startup focused on developing the next generation of space-based defense technology. Our mission is to design and deploy autonomous interceptors capable of neutralizing hypersonic and ballistic threats, addressing a critical need for the U.S. and its allies. As part of a small but elite team, you'll engage in developing systems that merge advanced sensing, guidance, and spaceflight. Our efforts are constantly tested in rigorous environments, from ground experiments to potential orbital deployments, ensuring every engineer plays a key role in shaping the future of defense technology. Job Duties • Integrate sensor modules into sophisticated avionics systems, • Oversee the selection, calibration, and integration of sensors, including FOV analysis and lensing, • Construct high-reliability camera interfaces using SPI/I2C, MIPI, USB3, Ethernet, or custom buses, • Develop and implement perception pipelines for ultra-low latency object tracking, • Design and execute algorithms for target detection, filtering, and motion compensation, • Fuse data from IR/EO sensors with IMU, GPS, and other onboard estimators, • Collaborate with controls engineers to create perception-to-guidance interfaces for closed-loop systems, • Engineer verification and validation tests using high-G mounts and simulated environments Qualifications • B.S. degree in Electrical Engineering, Computer Science, Physics, Robotics, or related field, • Extensive experience with IR/EO camera systems, radar, and imaging physics, • Proficient in computer vision with tools like OpenCV, NumPy, and SciPy, • Proven track record with real-time detection and tracking algorithm implementation, • Knowledgeable in signal processing, filtering, sensor fusion, and coordinate transforms, • Hands-on experience with thermal cameras, radar, and optical equipment Preferred Experience • Familiarity with LWIR sensors or radar units, • Background in high-speed robotics or autonomous systems, • Experience with GPU acceleration, embedded systems, or FPGA-based vision, • Insight into optical modeling, lens design, and radiometry, • Understanding of IR scene modeling and synthetic target generation, • Experience in high-dynamic-range thermal environments or high-G mount design, • Familiarity with defense or aerospace sensor standards Why Join Us • Employer covers 100% of your benefits, • Early-stage equity in a pioneering space defense startup, • Opportunity for full product ownership over propulsion systems, • Founding engineering role with significant influence, • Engage in impactful work at the intersection of space and national security, • Collaborate with a team led by a technical founder with experience at leading aerospace companies, • Be part of a mission-critical effort to protect millions Compensation Details $120,000 - $180,000 #LI-AV

Job Description POSITION OBJECTIVE/SUMMARY: The Building Maintenance Engineer is responsible for performing a variety of building maintenance duties which may include: repair, maintenance, alteration, carpentry, and masonry, electrical, painting, welding, plumbing, and light construction of facilities associated with Kedren. MINIMUM QUALIFICATIONS REQUIRED FOR THIS POSITION: • Previous experience in general building maintenance in a psychiatric healthcare environment required or a related environment is preferred., • Ability to stand, walk, bend, stoop, squat, lift, and reach using required safety techniques., • Must be organized and detail oriented., • Good verbal and written communication, interpersonal skills, and the ability to interface with all levels of management and associates while building strong relationships., • Must have the ability to problem solve, meet deadlines and follow through on work assignments in a fast-paced environment., • The ability to work overtime and/or additional days on special projects as needed. GENERAL STATEMENT OF FUNCTIONS: • Perform semi-skilled craft related work in such areas as carpentry, electrical, masonry, painting, plumbing, sheet metal, and refrigeration in the maintenance, repair, and alteration of buildings, facilities, and equipment., • Maintain and repair a variety of equipment, including heating/air conditioning, laundry, kitchen, medical water systems, pool, sewage disposal, low pressure boilers, and other facility related equipment., • Perform minor welding; operates wood and metal working equipment, grounds maintenance equipment, tractors, trucks, and automobiles., • May assist in planning of duties for resident workers in a vocational training program., • May perform scheduling work and requisitioning of supplies and materials; maintains files and records and makes reports on work performed as required., • Practice confidentiality in all client, employee, and management related matters., • Assist in preserving Kedren’s mission, goals, and objectives; and help management in establishing its internal service delivery goals and objectives that are consistent with the organization’s public service mission statement., • Participate in the fundraising activities of Kedren., • Assist in other duties and special projects as assigned. Competencies: • Analytical Thinking - Able to breakdown raw information and undefined problems into specific, workable components that in-turn clearly identifies the issues at hand. Makes logical conclusions, anticipates obstacles, and considers different approaches to the decision-making process., • Attention to Detail – Accomplishes tasks through concern for all the areas involved, no matter how small. Monitors and checks work or information and plans and organizes time and resources efficiently., • Compliance – Ensures compliance and examines patient information to insure that they comply with company and industry regulations, and service policies and procedures., • Critical Thinking – Obtains, analyzes and evaluates information effectively in the face of ambiguity. Makes appropriate decisions based on relevant information and experience., • Equipment Management – Assesses equipment performance, identifies improvement opportunities, implements performance improvement; schedules routine or preventative maintenance with vendors., • Multi-tasking – Handles multiple projects or tasks simultaneously and creates linkages between all involved parties. Utilizes time management, setting priorities and managing ambiguity skills., • Multi-Trade Ability – Understands and exhibits skills in repairs, maintenance and/or installations in the areas of carpentry, plumbing, painting, cleaning, AC/heating systems, etc., • Thoroughness - Demonstrates attention to detail and accuracy. Defines and organizes tasks, responsibilities, and priorities. Takes responsibility for timely completion., • Safety – Works to comply with all safety regulations and promotes safety consciousness and well-being throughout the organization., • Safety and Quality Improvement – Identifies situations that compromise safety, and participates in risk reduction and continuous quality improvement.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are seeking a Principal Power Electronics Engineer I (2025538) to join our growing spacecraft payload development team. In this position, you will contribute across the entire development lifecycle of next-generation power electronics hardware for satellites and space power systems payloads—from leading the definition of power system architectures and trade studies to detailed circuit design, simulation, printed circuit board (PCB) layout, verification and integration testing, production transition, and manufacturing support. DUTIES AND RESPONSIBILITIES * Define electrical power system architecture, and derive power subsystem requirements * Design DC-DC power converters, motor drives, inverters, power management and control circuits from concept to production release * Perform detailed design for low to high complexity analog and power electronics circuits ranging from single DC-DC power converters to multi-output power supply modules * Perform modeling and analysis of analog and power electronics designs including worst-case circuit analysis (WCA), stress analysis, small signal modeling analysis, failure modes and effects analysis (FMEA), reliability analysis, and power integrity analysis * Develop design verification test plans, requirement compliance matrices, system integration and qualification test plans, and production acceptance test plans for power converters and power supply designs * Lead board bring-up and design verification testing of power electronics circuits and modules * Lead system integration, qualification campaigns, and release of analog and power electronics designs into production * Mentor younger engineers and foster knowledge sharing * Lead a small team of power electronics engineers to drive project execution * Perform research and monitor power electronics industry trends to drive innovation and generate intellectual property in this area REQUIREMENTS AND MINIMUM QUALIFICATIONS * Bachelor of Science (BS) degree or higher in Electrical Engineering (or related) from an accredited university. * Minimum of 9 years of experience designing analog and power electronics * Experience working with electrical power systems and subsystems, including developing power architecture and power requirements, performing trade studies for size, weight, power, and cost optimization (SWAP-C), selecting power converter topologies, and defining power management and control blocks * Experience with modeling and control of DC-DC converters and power stage design of different isolated and non-isolated DC-DC power converters (e.g. discrete linear regulators, Buck, Boost, Buck-boost, Flyback, Forward, Half-bridge, Full bridge, and Resonant converters) * Experience designing custom signal and power magnetics, and power filters for low noise and electromagnetic compatibility (EMC) * Experience developing design verification test plans, requirement compliance matrices, system integration and qualification test plans, and production acceptance test plans * Experience performing worst-case circuit analysis (WCA), stress analysis, failure modes and effects analysis (FMEA), and reliability analysis for power supplies * Extensive hands-on experience with testing and troubleshooting electronics and power converters using laboratory instruments such as oscilloscopes, impedance analyzers, spectrum analyzers, electronic loads, and signal generators * Experience with electronics schematic capture and printed circuit board (PCB) layout tools such as Altium, OrCAD, Allegro or Xpedition * Experience with analysis and simulation tools such as SPICE, LTSPICE, SIMetrix/SIMPLIS, PLECS, Simulink, MATLAB, MathCAD, ANSYS Q3D and SiWave, or HyperLynx * Excellent written and verbal communication skills PREFERRED EXPERIENCE * Master of Science or PhD in Electrical Engineering with research focus in power electronics * Experience designing high-reliability analog and power electronics for automotive, space or defense applications * Knowledge of space radiation environments and radiation effects in electronics * Experience in power electronics applications utilizing GaN or SiC wide bandgap power semiconductor devices * Experience running board-level power integrity simulation using tools such as Ansys SiWave, or HyperLynx * Experience with soft switching and resonant power converter topologies (e.g. LLC, CLLC, series resonant, phase shifted full bridge, dual active bridge, etc.) * Experience with power stage design for inverters and motor drives * Knowledge of modeling and control of inverters and motor drives * Experience with advanced control schemes for DC-DC power converters (e.g. voltage mode with feedforward control, constant on-time control, V2 constant on-time control, phase shift modulation, average current mode control) * Experience with isolation and grounding, failure mode effects analysis and fault tolerant design, and thermal management of power electronics * Programming skills to support hardware test and data processing (Python, MATLAB, etc.) * Knowledge of maximum power point tracking (MPPT) for solar power applications, battery sizing and battery management systems, power conversion for electric propulsion systems, power conditioning, power management, and power distribution units for spacecraft technology * Experience designing and testing power electronics units to meet industry standards and requirements in the automotive, industrial, space or military markets (e.g., FCC, CISPR, UL safety, ECSS, NASA, MIL standards) CesiumAstro considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate’s work experience, education/training, and key skills. Full-time employment offers include company stock options and a generous benefits package including health, dental, vision, HSA, FSA, life, disability and retirement plans. CesiumAstro is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. Please note: CesiumAstro does not accept unsolicited resumes from contract agencies or search firms. Any unsolicited resumes submitted to our website or to CesiumAstro team members will be considered property of CesiumAstro, and we will not be obligated to pay any referral fees. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionCompany Description At Coffman Engineers, we serve as both prime consultant and sub consultant on projects large and small. The markets we serve include commercial, institutional, government, industrial, healthcare, energy services, and more. Incorporated in 1979, we have employees in more than 23 locations serving clients across the United States and overseas. To meet client objectives and to integrate our many disciplines, we can create teams comprised of civil, structural, mechanical, electrical, fire protection, and corrosion control, as well as project/construction managers and professionals in a variety of specialty services. This ability has made us a leader in the engineering and construction communities, and has strengthened our reputation as being progressive, innovative, and a great place to work. Job Description Coffman Engineers is seeking a highly-skilled, outgoing, self-motivated Mechanical Engineering Department Manager with at least 13-years of experience to lead the mechanical engineering department in the Downtown Los Angeles office. This role is focused on technical leadership, staff development, and strategic growth of the Downtown LA office. The Mechanical Engineering Department Manager provides technical direction, supports project teams, mentors engineers, and strengthens client relationships. The role also contributes to department operations and business development efforts, with an emphasis on building a high‑performing mechanical engineering team that delivers consistent, high‑quality work. Key responsibilities will include: • Lead, mentor, and develop a team of mechanical engineers, designers, and technical staff., • Oversee workload distribution, staffing decisions, and employee performance evaluations., • Foster a collaborative and high-performance work culture., • Provide oversight over mechanical engineering projects from planning through construction, maintaining quality, schedule, and budget., • Provide technical oversight and quality control for designs, calculations, reports, and deliverables., • Serve as a subject matter expert in mechanical systems design, applicable codes, and industry best practices., • Identify and pursue business development opportunities in coordination with office leadership., • Develop and maintain relationships with clients, architects, contractors, and key stakeholders., • Lead proposal development, scope definition, and contract discussions., • Develop and manage department budgets, revenue forecasts, and financial performance. The successful individual will assist the business development team and other discipline leads in developing technical proposals and will take a proactive role in client engagement and marketing efforts. Candidates must be able to represent team capabilities while also providing high-quality technical design and consulting services to a diverse client base. Compensation and Benefits • Approximate Base Salary – $150,000 - $180,000 annually, • Paid overtime at 1.0 times hourly rate, • Competitive end of year discretionary bonus based on company/team/personal performance, • Hybrid Work Schedule (subject to change), • 401k with maximum of 5% Contribution Matching for 9% Employee ContributionQualifications, • Minimum of 13 years of U.S. professional experience. California experience preferred., • Bachelor’s degree in Mechanical Engineering, • California Mechanical Engineer PE registration required, • Experience coordinating with a multi-discipline design team, • Strong written and verbal communication skills, • Project management experience, • Proficiency with Microsoft Office Suite, Bluebeam, AutoCAD, and/or Revit, • Experience collaborating with local architectural/engineering community is a strong plus, • Experience with managing day-to-day contacts with internal and external clients, • Experience attending and participating in local professional organizations, • Strong working knowledge of California Mechanical Code, Plumbing Code, Energy Code, and applicable ASHRAE standards, • Must be a self-starter, persistent, and follow through in a consistent manner, • Passionate about the client or pursuit and takes ownership of his/her work, • Able to multi-task and prioritize in a fast-paced environment, • Possess strong critical thinking, organizational, and analytical abilities, • Maintain positive working relationships with internal and external customers, • Strong understanding of A/E/C industry terminology and procedures and basic marketing principles, • Strong organizational ability; detail oriented; high degree of accuracy, • Must work well under pressure, • Positive contributor to overall office and department goals, culture, and morale, • Excellent time management skills, • Ability to provide peer reviews of colleagues’ work product, • Ability to work with counterparts in other offices to share workload when required, • A positive, can-do attitude Additional Information Why You Want To Work Here You could choose to work anywhere, so why work at Coffman Engineers? Because we are different – our culture sets us apart. Simply stated, we are a group of creative, high-performing people who like working together and believe that what we do makes a difference. Employees say that it feels like working with a group of friends in a small office while enjoying the benefits and perks of working for a large firm. Our culture isn’t the only thing that makes us different, but it drives everything we do. The office you will be joining may provide flexibility to work from home some of the time. The specifics of your work from home options will be worked out with your manager following your hire. Coffman offer a comprehensive benefits plan, flexible PTO program, an open collaborative environment, professional development, community opportunities, and lively employee activities. But the best part of working here is being in an environment that allows you to be yourself, be respected, work alongside other intelligent motivated people, and have some good hearty fun while you impact the built environment around you! Don’t take our word for it. Check out what others are saying: Coffman at a Glance: • 47 years in business, • 850+ employees serving clients throughout the U.S. and overseas from more than 23 locations, • Multi-discipline engineering services plus corrosion control, commissioning and project/construction management, • 70+ employees in 9 offices, providing Fire Protection services since 2014, • #34 Top 80 Engineering Firms, Building Design + Construction, 2022, • #29 Zweig Group Hot Firm List, Zweig Group, 2021, • #161 Top 500 Design Firms, Engineering News-Record, 2023 Applying You must apply online for this position. If you are unable to complete our online application process, or if you need assistance to do so, let us know so we can provide a reasonable accommodation. If you are experiencing problems applying through our system, please try using a different browser or an updated version of your current browser. If that doesn't work, please contact us directly. This position is direct with Coffman Engineers; we are an Equal Opportunity Employer. We do not discriminate on the basis of any status protected under federal, state, or local law. Follow us! Twitter: @CoffmanEngineer Instagram: @CoffmanEngineers LinkedIn: Facebook: @CoffmanEngineers

Job DescriptionAbout DexterityAt Dexterity, we believe robots can positively transform the world. Our breakthrough technology frees people to do the creative, inspiring, problem-solving jobs that humans do best by enabling robots to handle repetitive and physically difficult work. We’re starting with warehouse automation, where the need for smarter, more resilient supply chains impacts millions of lives and businesses around the world. Dexterity's full-stack robotics systems pick, move, pack, and collaborate with human-like skill, awareness, and learning capabilities. Our systems are software-driven, hardware-agnostic, and have already picked over 15 million goods in production. And did we mention we’re customer-obsessed? Every decision, large and small, is driven by one question – how can we empower our customers with robots to do more than they thought was possible? Dexterity is one of the fastest growing companies in robotics, backed by world-class investors such as Kleiner Perkins, Lightspeed Venture Partners, and Obvious Ventures. We’re a diverse and multidisciplinary team with a culture built on passion, trust, and dedication. Come join Dexterity and help make intelligent robots a reality! About the RoleAs a Mech Specialist, you will be the primary engineer to operate our product at the customer site, and be the first point of contact for troubleshooting issues, and providing communication to our development team. This role bridges hardware, systems integration, and field operations with ownership of diagnostics, repairs, retrofits, and lifecycle service actions. You’ll lead on-site investigations, coordinate fixes, and interface tightly with our Development team. Success in this role means hands-on operational excellence, a deep understanding of Physical AI systems, and the ability to communicate clearly with both technical teams and operations leaders. Physical & Work Environment • Location: Customer Facility in Gardena, CA., • This position requires extended deployment to customer locations, with up to 80% of time spent stationed on-site., • On-site assignments will involve warehouse conditions (temperature variations, industrial noise) and prolonged standing or walks., • Assignments may span several weeks or months and are intended to establishing a consistent presence at the customer site.Core Outcomes, • New Product Introduction: Ensure successful field deployment of new products by driving pilot execution, resolving early issues, and meeting customer KPIs., • Reliable Operations: Maintain high Mech system uptime by diagnosing root causes and executing rapid, durable fixes in the field., • Lifecycle Stewardship: Own warranty actions, spare part tracking, retrofit execution, and RMA processing for your assigned sites., • Customer Confidence: Act as the face of Dexterity Engineering in the field—resolving chronic issues and maintaining long-term system health., • Operational Excellence: Reduce repeat incidents by authoring runbooks, knowledge base articles, and automated diagnostics.Key Responsibilities, • Run day-to-day operations of the Mech system at customer sites during pilots., • Act as super-user, first line of support, and liaison between DGS and Dexterity., • System Operation: Safely operate Mech and materials handling systems. Manage daily workflow, including package exception handling., • Issue Management: Identify and report issues; perform initial T0 troubleshooting. Validate fixes in the field and close out issues with Echo/Delta teams. Track issue lifecycle on site until closure., • Reporting: Provide daily internal updates and KPI reports. Deliver daily customer-facing reports on operations status., • Customer Interface: Align pilot schedules with local operations team. Support customer training sessions and act as a trainer for new users., • Feature Deployment: Execute SW upgrades/downgrades and RFT (Request for Test) activities for software and hardware. Manage test packages and coordinate new feature validation., • Maintenance & Logistics: Manage spares, tools, and maintenance cage. Support preventive maintenance activities as directed by Echo/Delta., • Continuous Learning: Build knowledge base of operations, troubleshooting, and reporting.Core Skills & Experience, • Strong troubleshooting skills across electromechanical systems, pneumatics, drives, sensors, and industrial robotics, • Comfort with Linux command line, log analysis, and basic application debugging (Python/SQL), • Familiarity with tools like Jira, Zendesk, and knowledge base platforms, • Experience managing spares, executing RMAs, and coordinating with supply chain or service teams, • Ability to read schematics, wiring diagrams, and mechanical drawings, • Self-starter mindset, with ability to lead service actions under ambiguous field conditions, • Strong communication skills to clearly explain findings and collaborate across functions, • Familiarity with support tools and observability platforms (e.g., Grafana, Kibana, Foxglove, ArgoCD)., • Self-starter mindset with a willingness to take ownership in ambiguous environmentsBias for Action — sense of urgency in production environments; willingness to “own the ticket” until closureNice-to-Have, Role-Specific Strengths, • Experience supporting warehouse robotics or industrial automation systems, • Familiarity with EtherCAT, Beckhoff, or Elmo servo drive systems, • Prior field service engineering or hardware NPI commissioning experience, • Experience developing or maintaining diagnostic tooling, • Knowledge of application-layer debugging, especially for real-time systems, • Understanding of reliability modeling, FMEA, or service metrics (e.g., MTTR, MTBF)Qualifications, • Bachelor’s degree in Mechanical, Electrical, Mechatronics, or Industrial Engineering or related field, • 3+ years in field service, product support, or hardware debugging roles in robotics, automation, or complex electromechanical systems, • Physical ability to perform service tasks in warehouse environments, including equipment access, lifting, and calibration, • Comfortable working extended hours or on-call rotations for high-severity incidents, • Must be able to travel up to 25%

Job DescriptionSENIOR ELECTRICAL ENGINEER (HARDWARE DESIGN) Freeform builds AI-native manufacturing systems that unify software, hardware, and physics to produce industrial-scale parts at the speed of human ideation. By treating manufacturing as a single integrated system, we unlock a new era of innovation where complex hardware is designed, built, and scaled without limits. As a Senior Electrical Engineer at Freeform, you will play an integral role in the design and development of custom electronics that bring our advanced metal 3D printing factory systems to life. You will be solving challenging problems in fields such as high performance compute, high speed communications, embedded hardware, motion control, autonomous robots, and much more. You will use a first principles approach to solving problems and tackling new areas within electrical engineering that you may not have directly worked on before. The ideal candidate is capable of running projects from cradle to grave and has the ability to work effectively with other engineering disciplines. 3D printing experience is not required to be successful here - rather we look for smart, motivated, collaborative engineers who love solving hard problems and creating amazing technology! Responsibilities: • Rapidly design, develop and test highly reliable electronics for metal printing, • Drive electrical architecture, product requirements, component selection, analysis, schematic capture, prototyping, bring-up, debugging, documentation, product management, productization, manufacturing, and test, • Challenge assumptions and learn new design approaches, • Drive component selection, analysis, schematic capture, prototyping, bring-up, debugging, documentation, manufacturing, and test, • Hands-on debugging of the unexpected via the use of laboratory test equipment, custom instrumentation, and testing setups, • Model and simulate circuit designs for analysis and performance Basic Qualifications: • Bachelor's degree in electrical engineering, computer engineering, or similar engineering discipline, • 5+ years of professional experience designing and delivering complex electrical hardware, • Broad electrical engineering background; well versed in electrical engineering fundamentals and comfortable taking a first-principles approach to solving problems, • Experience designing, developing, and testing analog and digital circuits (e.g. generating electrical schematics, analyzing circuits, breadboarding prototypes, designing circuit boards, etc. Nice to Have: • Advanced degree (Master's or PhD) in electrical engineering, • 8+ years of electronic product experience designing hardware from concept through production; strong emphasis on full life cycle development of new hardware products and not small incremental updates to legacy hardware, • Familiarity with industrial automation technologies and robotics, • Working knowledge of data acquisition systems, • Experience with sensors, embedded microcontroller design and firmware, and FPGA hardware and software development, • Experience with high-speed data acquisition systems, high-accuracy motion systems, high-speed scanning systems, optomechanical assemblies, and complex electromechanical systems Location: * Based in Hawthorne, our vertically integrated facility brings technology development, R&D, and production together under one roof. We operate at the center of LA's deep tech ecosystem, surrounded by some of the most ambitious hardware innovation happening anywhere in the country. What We Offer: • We have an inclusive and diverse culture that values collaboration, learning, and making deliberate data-driven decisions., • We offer a unique opportunity to be an early and integral member of a rapidly growing company that is scaling a world-changing technology., • Benefits, • Significant stock option packages, • 100% employer-paid Medical, Dental, and Vision insurance (premium PPO and HMO options), • Life insurance, • Traditional and Roth 401(k), • Relocation assistance provided, • Paid vacation, sick leave, and company holidays, • Generous Paid Parental Leave and extended transition back to work for the birthing parent, • Free daily catered lunch and dinner, and fully stocked kitchenette, • Casual dress, flexible work hours, and regular catered team building events, • Compensation, • Our intent is to offer a salary that is commensurate for the company's current stage of development and allows the employee to grow and develop within a role., • In addition to the significant stock option package, the estimated salary range for this role is $130,000-$200,000. The upper end of the range is reserved for individuals who demonstrate exceptional experience, deep domain mastery, and a proven history of high performance and impact., • Freeform is an Equal Opportunity Employer that values diversity; employment with Freeform is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description ELECTRICAL REPAIR TECHNICIAN Position: Electrical Repair Technician (Bench / Avionics) Employment type: FULL TIME Location: 9101 WINNETKA AVE Company summary FAA-certified avionics repair facility providing precision maintenance and overhaul services. Position summary Perform bench and shop level repairs, overhauls, and maintenance on aircraft avionics instruments and related equipment, ensuring full compliance with ISO 9001:2015 and FAA 145 requirements. Key responsibilities • Perform repairs, overhauls, and maintenance on aircraft avionics instruments per customer purchase orders, manufacturer manuals, and instructions., • Lay out items on assigned racks and maintain associated paperwork for accountability and traceability., • Complete required documentation/forms throughout the repair process to meet ISO and FAA regulatory requirements., • Perform self-audits and support internal/process audits as assigned., • Coordinate closely with technicians and office personnel to support a team-oriented environment., • Maintain clean, safe, and organized work areas; participate in housekeeping duties., • Strong bench-level electronics skills; hands-on experience repairing circuit boards., • Ability to read and interpret electrical schematics and wiring diagrams., • Ability to reverse-engineer at the board level., • Prior TV and radio repair experience (component-level troubleshooting and repair)., • Familiarity with avionics systems and instruments., • Strong documentation habits, attention to detail, and ability to follow regulatory procedures., • Good communication skills and ability to work collaboratively. Preferred / additional skills • FAA certifications or prior experience in an FAA 145 environment., • Shop environment; exposure to soldering, small parts, and test equipment., • Salary: Starting at $22.00, will consider higher depending on level of experience U. S. Citizen or Permanent Resident Veteran friendly To apply Send resume, cover letter, and any relevant certifications or portfolio examples to: Company DescriptionAVIONICS FAA REPAIR STATION/OVERHAUL/DISTRIBUTORAVIONICS FAA REPAIR STATION/OVERHAUL/DISTRIBUTOR

Job DescriptionIntellisense Systems, Inc. is a privately held company with a proven track record of developing and deploying innovative products that successfully operate in the most extreme environments. We are a fast-growing Southern California technology innovator that solves tough, mission-critical challenges for our customers in the aerospace, defense, and commercial markets. We design, develop, and manufacture advanced products for airborne, ground, maritime, and emerging market applications. We are seeking a Director, Business Development. This is an excellent opportunity for an energetic “hands-on, get-it-done” individual to contribute to the development of business of the highest importance to the future growth of the Corporation. The Director, Business Development will report to the Corporate Vice President, Business Development and be responsible for all aspects of the business development/capture lifecycle, from opportunity creation/ identification through to award, including customer relationship, opportunity identification, proposal generation and overall customer satisfaction. The successful candidate will be an experienced professional that drives business growth across the Corporation focusing on a military service branch and associated Tier 1 system integrators. The successful candidate will present a proven track record of action management of technically complex programs and engineering tasks, which are essential skills for developing business utilizing cutting edge technologies. The candidate must quickly assume leadership responsibility for capturing large military programs as well as their eventual successful transition to program execution. This is an on-site role located in Torrance, CA. As Director, Business Development, Your Responsibilities Are: • Identification and capture of new business including Small Business Innovation Research transition with focus on year over year revenue growth., • Actively participate in the identification and process of potential business opportunities to align with Intellisense growth strategy., • Support strategic, long-range planning, market analysis and forecast data for DoD sector. Demonstrate a history of Identification and capture of new military and defense business opportunities, including relevant Small Business Innovation Research with focus on year over year revenue growth., • Lead capture and proposal team activities with a focus on customer requirements and budget, competitive intelligence and price-to-win analyses., • Conduct customer engagements and customer call planning with the purpose of establishing critical trust with senior leaders of assigned military service(s) and Primes., • Identification of strategic alliances, teammates and partners for key pursuit opportunities., • Participate in relevant trade shows, industry days and seminars to stay abreast of customer strategies, goals and objectives., • Lead capture and proposal writing activities with a focus on customer requirements, program management planning and budget, competitive intelligence and price-to-win analyses – how we win and why us., • Identify and pursue opportunities for Foreign Military Sales or DCS of existing products in compliance with current ITAR and US Export restrictions., • Will be required to travel up to 50%., • A minimum of an Engineering bachelor's degree in electrical engineering, computer science, or similar with 7+ years' experience in engineering., • 5+ years’ experience in Business Development with demonstrated results. Program management experience for avionics programs/systems., • Practical understanding of technology transitioning, product/market development, and marketing/product planning for US military applications., • Knowledge of conducting and directing competitive product analysis using market research techniques and a solid technical understanding of service/agency needs and requirements., • Must have superior proposal development/writing and basic contracting/negotiation skills., • Strong leadership skills, excellent communication (presentation, written, and verbal), and relationship building skills. Good problem-solving ability to work with a diverse work force., • Relevant experience in Mergers and Acquisitions (M&A) a plus., • Business degree is a plus., • Experience with AF and/or NAVAIR Programs and Platforms, • Former pilot is a plus, • Advanced degree is a plus, • The freedom to take risks, to innovate, and to be rewarded., • The ability to deliver products that are continually recognized as industry disruptors. $150,000-$215,000 + quarterly bonus However, base salary for this position will vary based on your skills, qualifications, and experience. Benefits: • 4 Weeks PTO a year (including 40 hours of PTO your first day), • 10 paid holidays, • 401(k) with 100% employer matching up to 4% of salary (no vesting period), • Multiple options for Medical, Vision, Dental Insurance plans, • Health Savings Accounts, • Flexible Spending Accounts, • Tuition Assistance (30% of Tuition with a minimum qualifying grade), • 100% Paid Employee Assistance Program (EAP), • 100% Paid Basic Life and AD&D Insurance, • 100% Paid Workers Compensation Insurance With an immediate 40-hours of paid time off and 100% 401(k) matching up to 4% of your annual salary without a vesting period, we recognize that employees are our greatest resource and that finding the right individuals will make our company even better. If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please contact us by phone at 424-319-7813 or by email at Unless otherwise stated in the requirements section of an individual job listing, our positions require U.S. Citizenship, U.S. Permanent Residency, or other status as a U.S. Person as defined by 8 USC 1324b(a)(3). Intellisense Systems, Inc is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, veteran status, genetic data, or other legally protected status. ZU 25023-A Powered by JazzHR ArmNUJ4zKC

Job Description Icarus was founded on the belief that the Stratosphere is the Forgotten Frontier and that reclaiming it will define the next era of aerospace and what is possible from the sky. We build solar-powered aircraft that fly at 60,000 ft for weeks at a time, delivering persistent, affordable, and scalable presence from this layer of the atmosphere. Mission Re-establish and maintain dominance in the Stratosphere. What you'll do • Deploy forward with aircraft, ground systems, and engineers to real-world test sites and customer environments, • Own on-site integration, troubleshooting, and rapid iteration of flight hardware and software, • Act as the connective tissue between flight operations, engineering, and customers, • Debug avionics, RF, power, software, and mechanical issues in the field under time pressure, • Execute flight tests, demos, and exercises with minimal support and high autonomy, • Collect ground truth, flight data, and operator feedback and drive it back into the product, • Support customer training, mission planning, and operational workflowsWhat we're looking for, • 2+ years working on real systems in the field (aerospace, robotics, defense, autonomy, or hardware startups), • Strong hands-on debugging skills across hardware and software, • Comfort working across disciplines: avionics, RF, embedded software, mechanical systems, and ops, • Ability to operate independently in ambiguous, high-pressure environments, • Strong communication skills with engineers, operators, and customers, • Willingness to travel frequently and operate out of test ranges, airfields, and remote locationsWhy Icarus, • Meaningful equity, • Top market salary and bonuses, • Health, dental, and vision insurance, • Factory in El Segundo, • Real ownership, real hardware, real flight, • Small team, massive responsibility, • High signal (engineering) to noise (management) culture, • Dream desk setup, • Daily lunch, • Unlimited celsiusThis is not a normal engineering job, • We are pioneers, not corporate managers. Icarus deliberately optimizes for a high signal (engineers) to noise (management) ratio, where engineering, flight, and execution matter more than process, politics, or management overhead, • You will work side by side with the CEO and a small team of world-class builders. You will own your subsystem end to end. Design it. Build it. Break it. Fix it. Validate it in the desert. Fly it. Then do it again, faster, • We expect full extreme ownership. This is a high-trust, no-BS team, and everyone pulls their weight, • We are hiring across the stack: mechanical, aerodynamics, RF, GNC, electrical, avionics, power electronics, energy storage, software, and systems, • We want builders. No hand-holding. No fluff. No fake projects. No slide decks. No sitting in meetings all day. Just raw engineering, real hardware, and real flight, • You must thrive under pressure, learn fast, troubleshoot in the field, and push hardware to its limits. We move fast. We go to Mojave at 4 am in the morning. We expect results and an obsession with quality and speed, • Technical interview, • One-on-one with CEO The salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are considered part of Icarus' total compensation package. We're an equal opportunity employer. We welcome all applicants without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

Job Description Head of Propulsion (Founding Engineer) – Chemical Propulsion & High-Energy Systems El Segundo, CA | On-site Opportunity Summary A venture-backed defense technology startup is developing advanced interceptor platforms designed to operate in extreme, high-speed environments. The team is building systems where propulsion performance directly determines mission success, requiring rapid impulse generation, precise control, and reliable operation under high pressure and thermal stress. This role serves as the founding leader for propulsion, owning the full architecture, design, and execution of chemical propulsion systems from first principles through testing and demonstration. You will define propulsion strategy, lead system trade studies, and build hardware that moves from concept to fully validated subsystems. This is a high-ownership role with direct impact on product direction and system performance. About Us We are an early-stage engineering team developing autonomous defense systems that integrate propulsion, sensing, and control into tightly coupled hardware platforms. The company operates at the intersection of aerospace and national security, with a focus on rapid iteration, real-world testing, and building mission-critical systems from the ground up. Job Duties • Own propulsion architecture across chemical propulsion systems, including gas generators, monopropellant and bipropellant systems, and hybrid approaches, • Lead design and development of high-energy propulsion hardware including combustion chambers, injectors, valves, and feed systems, • Define system requirements for thrust, impulse, response time, and thermal performance, • Model combustion processes, mass flow, pressure dynamics, and heat transfer across propulsion systems, • Evaluate tradeoffs across propulsion architectures to meet performance and integration constraints, • Design and validate high-pressure systems including tanks, regulators, and fluid handling components, • Plan and execute propulsion test campaigns including static fire, pressure, and thermal testing, • Develop test infrastructure, instrumentation, and data acquisition systems for propulsion validation, • Analyze test data to drive rapid iteration and performance improvements, • Collaborate with mechanical, electrical, and controls teams to ensure full system integration, • Establish propulsion design standards, test processes, and documentation as the function scales, • Support hiring and build out the propulsion team over time Qualifications • Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, Chemical Engineering, or related field, • 5+ years of experience working with chemical propulsion systems or high-energy fluid systems, • Deep understanding of combustion, fluid dynamics, thermodynamics, and high-pressure system design, • Experience designing and testing propulsion hardware such as thrusters, gas generators, or rocket engines, • Strong modeling experience using tools such as CFD, CEA, MATLAB, or Python, • Hands-on experience with propulsion testing, including instrumentation and data analysis, • Ability to operate with high ownership in an early-stage, fast-paced environment, • U.S. citizenship required Preferred Experience • Experience with monopropellant, bipropellant, or hybrid propulsion systems, • Background in aerospace systems such as missiles, launch vehicles, or high-speed aircraft, • Experience leading propulsion development programs or small engineering teams, • Familiarity with environmental and qualification testing standards, • Experience with high-speed data acquisition, sensors, and test instrumentation, • Hands-on experience with machining, pressure systems, or test stand development Why Join Us • Equity participation and performance-based incentives, • Medical, dental, and vision coverage for employees and dependents, • Paid parental leave and flexible PTO policy, • Access to a 401(k) retirement plan, • Opportunity to define and lead propulsion development for a mission-critical system from the ground up Compensation Details $140,000 - $190,000 #LI-AV

Job DescriptionDescriptionAs a Test Automation Engineer at Impulse, you will develop and operate the software systems that power our propulsion test infrastructure. You’ll be responsible for automation, data acquisition, and control software used across our engine test stands, valve test benches, and other propulsion component test assets. In this role, you’ll collaborate closely with test operations, propulsion engineers, and other cross‑functional teams to ensure rapid, reliable, and high‑fidelity testing of critical flight hardware. Responsibilities • Design, implement, and maintain automation software for propulsion test operations, including near–real‑time data acquisition, control systems, automated test sequences, and user-facing tools., • Implement automation frameworks to streamline setup, execution, and analysis for propulsion component testing (e.g., engines, valves, pressure systems)., • Work closely with the test operations team to continually refine and optimize the software used on test assets., • Participate in the full test lifecycle—from concept and integration to execution, debugging, and iterative improvement. · Review and contribute high‑quality, well‑tested code within a collaborative, fast‑moving environment. · Diagnose and resolve issues across software, hardware interfaces, and test infrastructure with resourceful, hands‑on problem‑solving. · Work onsite with engineering and test teams to support rapid propulsion development. Minimum Qualifications • Bachelor’s degree in engineering, computer science or related field., • Experience developing user-facing software applications related to networking, hardware control and data acquisition., • 2+ years of demonstrated proficiency with python or an object-oriented programming language & demonstrated hands-on experience operating the software. Preferred Skills and Experience • Demonstrated knowledge of basic data acquisition, control principles, and hardware‑software integration., • Experience with software best practices and workflows, including git., • Demonstrated ability of taking project ownership and working well in small teams., • Master’s degree in electrical, software, mechanical, or aerospace engineering., • Familiarity or experience with Propulsion Systems development testing., • LabVIEW certification (CLAD, CLD, CLA)., • Experience with real‑time operating systems or deterministic control software., • Hands-on experience with design, build, and operation of electrical systems., • Understanding of core networking concepts such as IP addressing, Ethernet, VLANs, and PTP. Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Lead Avionics Engineer – Drive Next-Generation Spacecraft Systems! El Segundo, CA | On-site Opportunity Summary A seed-stage deep-tech startup is developing next-generation platforms that enable mobility, maneuverability, and in-space resource capability for a wide range of orbital missions. The company is focused on advancing spacecraft performance through novel propulsion and onboard systems, supporting missions that require reliability in demanding orbital environments. The engineering team brings experience across spacecraft development, launch systems, and high-reliability hardware programs, and the company is entering a rapid build and test phase. As a Lead Avionics Engineer, you will own the avionics and electronic system architecture across the spacecraft platform. You will guide design decisions from concept through hardware bring-up and flight readiness, working across flight computers, power systems, communications, and supporting electronics. This role is built for someone who wants to take true ownership, move quickly, and help shape the technical direction of a company that is building hardware to operate in some of the most complex mission environments in space. About Us We are a venture-backed space technology startup building high-performance spacecraft platforms that support in-space mobility and future propellant generation capabilities. Our mission is to expand what is possible in orbit by pairing advanced propulsion with tightly integrated spacecraft systems. Operating from Southern California, we combine a first-principles engineering culture with a fast-moving startup mindset, giving engineers real ownership over design, testing, and mission execution. Job Duties • Lead avionics architecture, design, qualification, and integration across the spacecraft platform, • Develop flight-ready electronics from concept through system integration and mission operations, • Translate operational needs into technical requirements and system-level trade studies, • Design and prototype flight computers, power distribution, networking, and comms hardware, • Perform structured debugging, fault isolation, and root-cause investigations, • Build hardware-in-the-loop test environments and validation frameworks, • Ensure reliability, testability, and compliance across mission-critical systems Qualifications • Bachelor’s degree in electrical engineering, aerospace engineering, computer engineering, computer science, or related field, • 5+ years of experience designing avionics or space-grade electronics, • Direct experience delivering flight-qualified or mission-critical electronic systems, • Familiarity with government, aerospace, or industry hardware standards, • Hands-on background in circuit design, debugging, and test equipment use, • Proficiency with PCB design tools such as Altium or similar platforms, • Strong system-level troubleshooting capability across hardware and software interfaces, • Experience working in fast-paced engineering environments with significant ownership, • Strong technical foundation supported by first-principles problem solving Preferred Experience • Avionics or electronics work on spacecraft, launch vehicles, satellites, or deep-tech platforms, • Experience supporting integration, environmental testing, or qualification campaigns, • Background working with space-relevant system constraints such as radiation tolerance, thermal limits, EMI/EMC, or mission reliability engineering, • Experience with PCB layout and schematic design tools beyond basic use, • Familiarity with aerospace standards including MIL-spec, ECSS, or NASA-derived guidelines, • Prior exposure to early-stage startup environments or small engineering teams Why Join Us • High-ownership role with direct impact on flight hardware, • Opportunity to help shape the architecture of next-generation spacecraft systems, • Tight-knit, high-caliber team working on complex and meaningful technology, • Build in an environment where decision-making is fast and engineering leads the way Compensation Details $175,000 - $215,000

Job Description About Us: LettrLabs is a technology company at heart, with world class robotics designed, built, and operated in house, disrupting the direct mail industry with a brand new advertising medium. Paired with an advanced direct mail advertising platform (SaaS), we integrate into the broader omni-channel advertising ecosystem. We enable businesses to connect meaningfully with customers through personalized, robotically handwritten mail that vastly outperforms conventional printed pieces. Our mission is to make direct mail advertising as effortless and impactful as digital advertising. Position Overview: As a Staff Mechatronics Engineer, you will be responsible for the architecture, design, implementation, testing, and ongoing improvement of our custom automation equipment. You'll work across mechanical, electrical, controls, and embedded domains to deliver reliable, production-ready mechatronics systems. This role requires a blend of high-level system thinking and low-level engineering execution. You will lead designs from concept through deployment, collaborate closely with manufacturing and operations, and continually drive performance, reliability, and throughput improvements. You will have large, end-to-end ownership of complex electromechanical automation and robotics systems, with focus on cost, scalability and warehouse automation platform development to modernize and revolutionize an aging industry. Key Responsibilities: • Own the full lifecycle of mechatronics systems: requirements definition, architecture, design, prototyping, testing, release, and iteration., • Design precision mechanisms, paper-handling components, motion assemblies, and supporting structures., • Select and integrate actuators, sensors, linear motion systems, and industrial components., • Design wiring harnesses, cable routing, sensor interfaces, and panel layouts., • Develop control architectures including PLC logic, embedded firmware, state machines, and motion profiles., • Apply principles of control theory, system modeling, and dynamics to achieve smooth, reliable motion., • Collaborate with electrical engineers, machinists, software engineers, and operations teams to bring designs into production., • Lead debugging and root-cause analysis efforts for mechanical, electrical, or firmware issues., • Support manufacturing through documentation, build procedures, BOMs, testing protocols, and quality control., • Insatiably curious, multidisciplinary thinker with exceptional creative problem-solving, focus on solution scalability, and a humble, highly capable, "figure-it-out" attitude., • 10+ years engineering complex automation or mechatronic systems, with demonstrated leadership in system ownership and platform architecture., • Strong mechanical design background with experience in mechanism/motion design, precision assemblies, and CAD proficiency (Siemens NX preferred, SolidWorks/Creo acceptable)., • Hands-on expertise across mechanical, electrical, and embedded domains typical of mechatronics:, • Experience with actuator and motor selection, motion control systems, and Sensor integration, • Electronics fundamentals (analog/digital), • Wiring, harnessing, cable management, • Pneumatic components and system design Proficiency with embedded programming principles: • State machines, • RTOS fundamentals, • Basic C/C++ for microcontrollers, • Communication buses (CAN, RS-485, I2C, SPI, Modbus, EtherCAT a plus), • Experience with industrial automation platforms (PLCs, servo drives, industrial IO)., • Strong understanding of control theory, feedback loops, PID tuning, system dynamics., • Experience with high-performance CNC platforms a plus., • Experience working in fast-paced, iterative engineering environments (startup or small team preferred)., • Strong problem-solving skills, ability to self-direct, and comfort managing ambiguous requirements., • Ability to rapidly learn new technologies and domains., • Excellent communication and documentation skills., • Non-technical:, • Strong product sense, able to see the big picture., • Comfortable with ambiguity in requirements — driving clarity and execution., • Quick learner and debugger, able to dive into unfamiliar systems with confidence., • Motivated to be part of a fast-moving, high-performance team, owning big chunks of the product. Additional Skills Worth Including: • Experience with DFM/DFA, especially for small-batch or in-house production., • Competence in finite element analysis (FEA) for stiffness, stress, and modal analysis., • Comfort with thermal considerations, motor heating, and duty-cycle analysis., • Understanding of power distribution, grounding, shielding, EMC/EMI best practices., • Familiarity with Python or similar for scripting, automation, data logging, and testing., • Knowledge of vision systems (simple image processing, alignment, fiducial detection) is a plus., • Ability to build quick prototypes (3D printing, machining, hand assembly)., • Experience writing clear technical documentation, maintenance guides, and SOPs., • Knowledge of linear rails, ball screws, belt-drives, and precision motion components., • Experience with servo tuning, dynamic motion profiles, jerk-limited trajectories., • Familiarity with multi-axis kinematics, calibration, homing strategies, encoder systems., • Experience with vibration analysis, resonance mitigation, system stiffness optimization., • Designing systems for industrial reliability, uptime, and maintainability. What you can expect at LettrLabs: Industry competitive salary Unlimited PTO policy 8 company paid holidays Why Join Us? At Lettrlabs, you'll be part of a forward-thinking team dedicated to transforming direct mail marketing. We offer a collaborative work environment, opportunities for professional development, and the chance to make a significant impact on our growth. Actual base salary offered will be determined by: experience, skills, and work location. This range is meant to cover total compensation and benefits. We welcome you to apply even if your expectations are outside our listed range. LettrLabs USA$160,000—$200,000 USD Actual base salary offered will be determined by: experience, skills, and work location. This range is for base salary, our total compensation includes equity and benefits. We welcome you to apply even if your expectations are outside our listed range. LettrLabs is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. LettrLabs is committed to providing reasonable accommodations for qualified individuals with disabilities in our job application procedures and throughout employment. If you need assistance or any accommodation, please let us know. LettrLabs does not accept unsolicited resumes from recruiters or employment agencies without a fully executed recruitment agreement in place. In the absence of such agreement, LettrLabs reserves the right to pursue and hire any candidates without an obligation to pay fees. Agencies are requested not to contact LettrLabs hiring managers or employees regarding recruiting services.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Senior Electronics Engineer I to our Digital and Mixed-Signal Electronics team. If you are great at what you do, enjoy working in a startup environment, and are passionate about developing leading-edge electronics for satellites, spacecraft, and aerospace systems, we would like to hear from you. At the Senior level, you will be tasked with full-stack hardware development for complex modules. You will have the opportunity to start at concept development and progress through detailed design, analysis, layout, build, test, and delivery, doing hands-on work at each phase. At a small company and a startup, your work will make direct contributions to the success of the business. The work is challenging and impactful, requiring both breadth and depth of technical knowledge. Our products are made for high-reliability space and airborne applications, so designs require high levels of technical rigor while maintaining the agility of a startup environment. The successful candidate will also present engineering design review materials to our customers and executive team. As such, excellent written and verbal communication skills are required.JOB DUTIES AND RESPONSIBILITIES • Own end-to-end design of electronics modules, from concept and architecture through schematic, layout, test, and production, • Own the digital and mixed-signal portions of complex RF electronics, such as phased array control circuitry, • Design circuits with FPGAs, processors, microcontrollers, and other complex programmable targets, • Design mixed-signal electronics ranging from software-defined radios to telemetry subsystems, • Perform detailed and complete schematic design for complex boards, ranging from key components to supporting passives, • Perform detailed PCB layout in Altium Designer for complex boards, sometimes working with a PCB Designer, • Complete analysis such as worst-case circuit analysis, signal integrity analysis, and power integrity analysis, • Develop bring-up plans and design verification plans for new electronics modules, • Perform bring-up and key verification testing of modules, often working with a technician to complete validation, • Release modules to production, working with the Manufacturing and Test Engineering teams, • Mentor junior engineers to build technical understanding and professional development, • Use working knowledge of adjacent fields, such as software and mechanical, to streamline development of electronics modulesJOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Bachelor of Science (BS) degree or higher in Electrical Engineering from an accredited university., • Minimum of 4 years of industry or university research experience in board-level electronics design, analysis, and test., • Direct experience designing high-reliability electronics for space or defense applications, including part derating, worst-case analysis, and thermal constraints., • Experience owning the design phase of circuits or boards, including trade studies, key part selection, and detailed design., • Experience delivering subcircuit or board designs to production and deployment., • Experience performing complex PCB layout, such as high-density interconnect (HDI) and high-speed digital or power electronics., • Experience running board-level signal integrity and/or power integrity simulation tools such as Ansys SIwave, ADS SIPro, or Mentor Hyperlynx., • Working knowledge of adjacent fields, such as software and mechanical., • Proficiency in electronics design tools such as Altium., • Strong lab experience for bring-up and verification of new hardware., • Excellent written and spoken communication skills.PREFERRED EXPERIENCE

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Schedule: This is a 4x10 rotating shift alternating Wednesday to Saturday or Sunday to Wednesday Shifts Available • Sun- Wed 1st shift (5am - 4pm), • Sun-Wed 2nd shift (2pm - 1am), • Wed-Sat 1st shift (5am - 4pm) Divergent is on the lookout for an adept and driven Service Specialist dedicated to the maintenance and enhancement of our current and forthcoming Additive Manufacturing (AM) equipment. We are committed to setting a new benchmark in aerospace and automotive manufacturing, and we need a proactive team member to help us redefine the future of manufacturing and automation. The Role • Maintain, enhance, and operate metal powder bed fusion additive manufacturing machines, ensuring optimal part quality, machine uptime, and production throughput within set schedules., • Conduct scheduled preventative maintenance on machinery and equipment to uphold operational efficiency., • Perform unplanned mechanical and electro-optical repairs, as well as machine optimizations and intra-facility equipment relocations., • Proficiently diagnose intricate electrical and mechanical issues, meticulously document root causes of failures, and drive effective corrective actions., • Execute complex optical and mechanical calibration procedures to uphold precision standards., • Swiftly troubleshoot and rectify mechanical issues to minimize production downtime., • Work with Programable Logic Controllers (PLCs) for automated systems., • Communicate machine status effectively, along with estimated repair timelines., • Conduct routine inspections to preempt potential maintenance requirements., • Utilize precision measuring instruments to ensure the accuracy of repairs., • Interpret schematics for troubleshooting purposes., • Adhere strictly to safety protocols., • Support performance enhancement initiatives within the production department and contribute to continuous improvement and quality programs (e.g., AS9100, IATF 16949, etc.)., • Assist in developing training programs, crafting work instructions, standard operating procedures, and provide guidance to other team members on machine maintenance tasks., • Ability to lawfully access information and technology that is subject to US export controls., • A Bachelor's degree in a technical field or Associates degree in a technical field and equivalent maintenance technician work experience. Strong equivalent maintenance technician experience may be considered in lieu of educational requirements., • Automation and machine control experience with demonstrated troubleshooting capabilities., • Mechanical and electrical troubleshooting and repair experience., • Interest and ability to work hands-on with additive technology: working with the machines, systems, and processes in a factory environment., • Highly self-motivated and able to prioritize and execute tasks in a fast paced, startup manufacturing environment., • Strong ability to think and work autonomously when required, and to perform under pressure to logically troubleshoot systems and processes., • Ability to effectively use a wide variety of hand tools and test equipment, • Proficient verbal and written skills especially related to technical records, documentation, and presentation., • The person in this position needs to frequently work in a factory environment to access and repair machinery (up to 100%), • Ability to walk, kneel, reach, climb, use hands to operate machinery in an industrial production environment, as required., • Ability to lift up to 30 lbs., as required to execute a repair. Pay Range$40—$55 USD What We Offer: • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job Description Electrical Engineering Intern: Radiant is building the next generation of clean, portable nuclear power through small modular reactors. As part of our mission to transform how energy is generated and delivered, we are seeking a motivated Electrical Engineering Intern to join our team. In this role, you’ll gain hands-on experience working alongside experienced engineers to support the design, testing, and integration of electrical systems that power our advanced reactors. This is an opportunity to apply your classroom knowledge to real-world engineering challenges while contributing to a pioneering clean energy technology. Responsibilities: * Assist with the design, modeling, and analysis of electrical systems and components. * Support testing, validation, and troubleshooting of hardware and instrumentation. * Collaborate with cross-disciplinary engineering teams (mechanical, software, nuclear) to ensure system reliability and safety. * Contribute to documentation, schematics, and technical reports. * Participate in lab and prototyping work as needed. Qualifications: * Current pursuit of a Bachelor’s or Master’s degree in Electrical Engineering or a related field. * Foundational knowledge of circuit design, power systems, or control systems. * Familiarity with tools such as MATLAB, Simulink, SPICE, or CAD software is a plus. * Strong problem-solving skills, attention to detail, and eagerness to learn. * Ability to work collaboratively in a fast-paced, innovative environment. Benefits and Perks * Stock: Substantial incentive stock plan for all full-time employees. * Medical: 100% up to base silver level plan for employee + 50% dependents, offers up to Platinum plans. * One Medical: Sponsored memberships for employees and their dependents. * Vision: 100% top tier plan coverage + 50% for dependents. * Dental: 100% top tier plan coverage, orthodontia extra, 50% for dependents. * Voluntary life, accident, hospital, critical illness, commuter and FSA/HSA are offered as employee contributed benefits. * 8-weeks of paid parental leave for all parents. Additional paid pregnancy leave for CA employees. * Daily catered lunch. Free snacks and drinks. * Flexible PTO policy. Remote workday allocation. * Company and team-bonding events, happy hours and in-person camaraderie. * Beautiful El Segundo headquarters close to the Pacific Ocean. Total Compensation and Benefits Radiant compensates people for impact and invests in those who continue to raise the bar. Radiant’s new hire compensation package includes base salary, substantial equity grants, and comprehensive health benefits. Total compensation and level are determined through a rigorous evaluation of interview performance, experience, education, and qualifications, and are designed to support continued growth as scope, responsibility, and impact expand at Radiant. The best of today’s advanced reactor builders don’t wait for job postings. They join the winning team. If that’s you, contact us directly for immediate opportunities: . We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. Unfortunately, we are unable to provide visa sponsorship at this time. This position involves access to technology that is subject to U.S. export controls. Any job offer made will be contingent upon the applicant’s capacity to serve in compliance with U.S. export controls.

Job Description AnySignal is a startup whose mission is to usher in the next generation of RF products and services. For the most demanding space and defense missions, AnySignal provides a flexible platform with world-class performance that is easy to deploy, monitor, purchase, and upgrade. Our team has a diverse range of backgrounds that cover cloud computing to artificial intelligence, communications and sensing, embedded systems, and much more. As a Digital Electronics Engineer on the hardware team, you will be responsible for owning the design, manufacture, test and deployment of highly integrated PCBAs used by a large number of space customers. You will work with a small team of software, RF hardware, and FPGA engineers to shepherd the product from initial design to vehicle integration, taking a full-stack approach to building robust space communication systems. Responsibilities * Design high-speed digital hardware including processors, FPGAs, memory, interfaces, and supporting circuitry * Perform trades and analyses of board architecture and component selection * Schematic capture and layout of space-grade PCBs * Bring-up and testing of new designs * Partner with RF engineers, software, mechanical, thermal, manufacturing teams and production test teams to drive designs end-to-end * Work with mechanical engineers to ensure proper thermal dissipation of devices * Work with supply chain counterparts to enable rapid manufacture and iteration of components * Design for performance under space-grade acceptance, qualification, and compliance requirements Basic Qualifications * Bachelor’s degree in electrical engineering, computer engineering, physics, or other STEM discipline * 3+ years of professional experience designing high-speed digital circuitry * Proven experience designing boards using EDA tools such as Altium Designer Preferred Experience & Skills * Experience designing and debugging Xilinx RFSoC / MPSoC-based systems or equivalent platforms * Experience debugging SoCs across the bootup stack (baremetal/bootloader/linux) * Experience designing and implementing mixed-signal circuit boards from concept through production using processors, FPGAs, Ethernet, multi-GHz Serdes, DRAM interfaces (DDR4), I2C, SPI, operational amplifiers, analog to digital and digital to analog converters, and power supply components * Deep understanding with configuration and interfacing of memory, volatile and nonvolatile * Familiar with failure mode effects and criticality analysis (FMEA) * Experience designing power trees with complex sequencing requirements * Experience in modeling, simulation, and testing of digital and power electronics * Working experience in voltage and current mode control and compensation design * Strong grasp of DC-DC topologies, with ability to select optimal architectures and components * Familiarity with power supply testing and packaging for harsh environments * Experience selecting and monitoring components capable of performing in a radiation environment In order to comply with the space technology export rules of the U.S. Government, such as the International Traffic in Arms Regulations (ITAR), it is necessary to be a U.S. citizen, a lawful U.S. permanent resident, a protected individual as specified by 8 U.S.C. 1324b(a)(3), or possess eligibility to secure the necessary authorizations from the U.S. Department of State. For additional information on ITAR, please seek further details. AnySignal values and fosters an inclusive, accessible environment, where all employees and customers feel respected, supported and able to participate. We welcome applications from: women, Aboriginal persons, persons with disabilities, ethnic minorities, visible minorities, veterans, people who identify as LGBTQIA2S+ and others who may contribute to diversification in our environment. Should you have a need for accommodation, AnySignal will endeavor to meet your accommodation needs. At any stage of the recruitment and selection process you may make your needs for accommodation known through contacting our team, in confidence, by email to: . We aim to provide equal access to all applicants with disabilities, please do not hesitate to contact us about accommodations. Compensation Range: $130K - $185K

Job Description Icarus was founded on the belief that the Stratosphere is the Forgotten Frontier and that reclaiming it will define the next era of aerospace and what is possible from the sky. We build solar-powered aircraft that fly at 60,000 ft for weeks at a time, delivering persistent, affordable, and scalable presence from this layer of the atmosphere. Mission Re-establish and maintain dominance in the Stratosphere. What you'll do • Design, implement, and fly guidance, navigation, and control systems for long-endurance stratospheric aircraft, • Own the GNC stack end to end: modeling, simulation, control law design, estimation, tuning, validation, and flight test, • Develop and maintain vehicle dynamics models and simulation environments, • Design and tune controllers for launch, climb, station-keeping, loiter, descent, and recovery, • Integrate GNC tightly with avionics, sensors, propulsion, and autonomy software, • Debug and iterate rapidly using flight data, hardware-in-the-loop, and field testing, • Support integration, production bring-up, and flight operations in the desertWhat we're looking for, • 2+ years working on real GNC systems for aircraft, UAVs, spacecraft, or similarly complex dynamic systems, • Strong fundamentals in dynamics, controls, estimation, and linear systems, • Experience with state estimation (EKF/UKF), sensor fusion, and inertial navigation, • Experience designing and tuning control systems that fly on real vehicles, • Comfortable working from first principles and validating with test and flight data, • Ability to move fast, own outcomes, and troubleshoot in the fieldWhy Icarus, • Meaningful equity, • Top market salary and bonuses, • Health, dental, and vision insurance, • Factory in El Segundo, • Real ownership, real hardware, real flight, • Small team, massive responsibility, • High signal (engineering) to noise (management) culture, • Dream desk setup, • Daily lunch, • Unlimited celsiusThis is not a normal engineering job, • We are pioneers, not corporate managers. Icarus deliberately optimizes for a high signal (engineers) to noise (management) ratio, where engineering, flight, and execution matter more than process, politics, or management overhead, • You will work side by side with the CEO and a small team of world-class builders. You will own your subsystem end to end. Design it. Build it. Break it. Fix it. Validate it in the desert. Fly it. Then do it again, faster, • We expect full extreme ownership. This is a high-trust, no-BS team, and everyone pulls their weight, • We are hiring across the stack: mechanical, aerodynamics, RF, GNC, electrical, avionics, power electronics, energy storage, software, and systems, • We want builders. No hand-holding. No fluff. No fake projects. No slide decks. No sitting in meetings all day. Just raw engineering, real hardware, and real flight, • You must thrive under pressure, learn fast, troubleshoot in the field, and push hardware to its limits. We move fast. We go to Mojave at 4 am in the morning. We expect results and an obsession with quality and speed, • Technical interview, • One-on-one with CEO The salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are considered part of Icarus' total compensation package. We're an equal opportunity employer. We welcome all applicants without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

Job DescriptionCompany Description At Coffman Engineers, we serve as both prime consultant and sub consultant on projects large and small, including commercial, retail, institutional, government, industrial, and project/construction management. Incorporated in 1979, we have employees in more than 23 locations serving clients across the United States and overseas. To meet client objectives and to integrate our many disciplines, we can create teams comprised of civil, structural, mechanical, electrical, fire protection, and corrosion control, as well as project/construction managers and professionals in a variety of specialty services. This ability has made us a leader in the engineering and construction communities, and has strengthened our reputation as being progressive, innovative, and a great place to work. Job Description We are looking for a Senior Mechanical Engineer with a minimum 10 years of experience, who wants to work and grow as a team player within our progressive multi-discipline firm. Ideal applicants will be well versed in all aspects of mechanical design and project management. The desired individual should be comfortable consulting to owners and general contractors and have a desire to work as part of a multi-discipline engineering team. The mission of this role is to expand this 14 person mechanical group’s capabilities into healthcare, education, data centers, and other target markets. This engineer will serve as a technical leader, bringing expertise in complex project design and execution while mentoring the team for long-term growth. They will help us build the next generation fo mechanical engineering leadership at Coffman, ensuring the team is well positioned to handle increasing diverse and sophisticated projects while maintaining high standards of quality, compliance, and innovation. Compensation and Benefits: • Approximate Base Salary – 130k-180k based on experience, • Paid overtime at 1.0 times hourly rate, • Competitive end of year discretionary bonus based on company/team/personal performance, • Hybrid Work Schedule (subject to change) Qualifications • BS in Mechanical engineering or related field, • PE license in Mechanical Engineering, • Minimum 10 years of experience in mechanical design, piping design, and/or process design, • Excellent verbal and written communication skills, • Experience in healthcare, education, federal and DOD, science and technology, and/or data center projects a plus., • Extensive knowledge of California building codes and California AHJs, • Project Management experience and/or certifications, • Must be a self-starter who is able to see the big picture and connect the vision of the company with his/her job, be persistent, and follow through in a consistent manner., • Passionate about the client or pursuit and takes ownership of his/her work., • Able to multi-task and prioritize in a fast-paced environment (or demonstrate ability to develop such abilities)., • Possess strong critical thinking, organizational, and analytical abilities (or demonstrate ability to develop such abilities)., • Maintain positive working relationships with internal and external customers., • Proficiency in Microsoft Outlook, Word, Excel and Adobe InDesign software preferred. Must understand database concepts. Working knowledge of marketing databases and proposal resources files., • General knowledge of firm’s practice, clientele, goals, policies, and procedures., • Basic understanding of A/E/C industry terminology and procedures and basic marketing principles., • Able to work independently, as a team member, and as a team leader., • Strong organizational ability; detail oriented; high degree of accuracy., • Must work well under pressure., • Positive contributor to overall office and department goals, culture, and morale. Additional Information Why You Want To Work Here Coffman truly focuses on its employees. We support and encourage individually tailored professional and technical advancement as well as personal growth. We offer an excellent salary and comprehensive benefits package (including eligibility for annual discretionary bonuses), a desirable location, and a professional office environment with the opportunity to work with a collaborative team. Don’t take our word for it. Check out what others are saying: Coffman At A Glance: • 45 years in business., • 850+ employees serving clients throughout the U.S. and overseas from more than 23 locations., • Multi-discipline engineering services plus corrosion control, commissioning and project/construction management., • 70+ employees in 9 offices, providing Fire Protection services since 2014., • #34 Top 80 Engineering Firms, Building Design + Construction, 2022., • #29 Zweig Group Hot Firm List, Zweig Group, 2021., • #161 Top 500 Design Firms, Engineering News-Record, 2023. Applying You must apply online for this position. If you are unable to complete our online application process, or if you need assistance to do so, let us know so we can provide a reasonable accommodation. If you are experiencing problems applying through our system, please try again using a different browser or an updated version of your current browser. If that doesn't work, please contact us directly. This position is direct with Coffman Engineers; we are an Equal Opportunity Employer. We do not discriminate on the basis of any status protected under federal, state, or local law. Follow us! Twitter: @CoffmanEngineer Instagram: @CoffmanEngineers LinkedIn: Facebook: @CoffmanEngineers

Job Description Responsibilities and Duties: * Read engineering drawings, electrical schematics, and wiring diagrams. * Assemble, wire, and integrate hardware including PCBs, harnesses, electrical panels, and enclosures. * Complete work according to procedures and specifications. * Collaborate with engineers to develop and document processes. * Expert using manufacturing tools including but not limited to soldering irons, cutters, strippers, crimpers, and torque wrenches. * Familiarity with electromechanical testing including continuity, hi-pot, and pull test. * Abide by a high level of operational standards regarding safety, reliability, and cleanliness. * Understand the basics of electrical hardware and how to interact with it safely. Required Skills and Qualifications: * Previous experience with military/aerospace grade electronics. * Experience with high-power electronics and batteries. * Knowledge of production equipment and tooling to build out a functional electromechanical manufacturing floor. * Ability to flex to projects in support of near-term company goals. * Experience with NASA-STD-8739.4, IPC-A-610, IPC-A-620. * Experience with UL-508A, NFPA-70 (NEC). Preferred Requirements: * Standing, bending, and working with small components for extended periods. * Good vision and fine motor skills for precision electrical assembly work. * Ability to lift up to 50 lbs occasionally. * Excellent teamwork, communication, and organizational skills. * Positive attitude and able to work well on a team with minimal oversight. * Able to stay organized and strong attention to detail. * Able to work in outdoor environments as needed. * Ability to work at elevated heights occasionally (scissor lifts, ladders, etc.) * Ability to travel on occasion for offsite support. Additional Requirements: * Must be willing to work extended hours and weekends as necessary to accomplish our mission. * Must work 100% onsite at El Segundo HQ. Benefits and Perks * Stock: Substantial incentive stock plan for all full-time employees. * Medical: 100% up to base silver level plan for employee + 50% dependents, offers up to Platinum plans. * One Medical: Sponsored memberships for employees and their dependents. * Vision: 100% top tier plan coverage + 50% for dependents. * Dental: 100% top tier plan coverage, orthodontia extra, 50% for dependents. * Voluntary life, accident, hospital, critical illness, commuter and FSA/HSA are offered as employee contributed benefits. * 8-weeks of paid parental leave for all parents. Additional paid pregnancy leave for CA employees. * Daily catered lunch. Free snacks and drinks. * Flexible PTO policy. Remote workday allocation. * Company and team-bonding events, happy hours and in-person camaraderie. * Beautiful El Segundo headquarters close to the Pacific Ocean. Total Compensation and Benefits Radiant compensates people for impact and invests in those who continue to raise the bar. Radiant’s new hire compensation package includes base salary, substantial equity grants, and comprehensive health benefits. Total compensation and level are determined through a rigorous evaluation of interview performance, experience, education, and qualifications, and are designed to support continued growth as scope, responsibility, and impact expand at Radiant. The best of today’s advanced reactor builders don’t wait for job postings. They join the winning team. If that’s you, contact us directly for immediate opportunities: . We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. Unfortunately, we are unable to provide visa sponsorship at this time. This position involves access to technology that is subject to U.S. export controls. Any job offer made will be contingent upon the applicant’s capacity to serve in compliance with U.S. export controls. Compensation Range: $45 - $61

Job Description Responsibilities and Duties: * Read engineering drawings, electrical schematics, and wiring diagrams. * Assemble, wire, and integrate hardware including PCBs, harnesses, electrical panels, and enclosures. * Complete work according to procedures and specifications. * Collaborate with engineers to develop and document processes. * Expert using manufacturing tools including but not limited to soldering irons, cutters, strippers, crimpers, and torque wrenches. * Familiarity with electromechanical testing including continuity, hi-pot, and pull test. * Abide by a high level of operational standards regarding safety, reliability, and cleanliness. * Understand the basics of electrical hardware and how to interact with it safely. Required Skills and Qualifications: * Previous experience with military/aerospace grade electronics. * Experience with high-power electronics and batteries. * Knowledge of production equipment and tooling to build out a functional electromechanical manufacturing floor. * Ability to flex to projects in support of near-term company goals. * Experience with NASA-STD-8739.4, IPC-A-610, IPC-A-620. * Experience with UL-508A, NFPA-70 (NEC). Preferred Requirements: * Standing, bending, and working with small components for extended periods. * Good vision and fine motor skills for precision electrical assembly work. * Ability to lift up to 50 lbs occasionally. * Excellent teamwork, communication, and organizational skills. * Positive attitude and able to work well on a team with minimal oversight. * Able to stay organized and strong attention to detail. * Able to work in outdoor environments as needed. * Ability to work at elevated heights occasionally (scissor lifts, ladders, etc.) * Ability to travel on occasion for offsite support. Additional Requirements: * Must be willing to work extended hours and weekends as necessary to accomplish our mission. * Must work 100% onsite at El Segundo HQ. Benefits and Perks * Stock: Substantial incentive stock plan for all full-time employees. * Medical: 100% up to base silver level plan for employee + 50% dependents, offers up to Platinum plans. * One Medical: Sponsored memberships for employees and their dependents. * Vision: 100% top tier plan coverage + 50% for dependents. * Dental: 100% top tier plan coverage, orthodontia extra, 50% for dependents. * Voluntary life, accident, hospital, critical illness, commuter and FSA/HSA are offered as employee contributed benefits. * 8-weeks of paid parental leave for all parents. Additional paid pregnancy leave for CA employees. * Daily catered lunch. Free snacks and drinks. * Flexible PTO policy. Remote workday allocation. * Company and team-bonding events, happy hours and in-person camaraderie. * Beautiful El Segundo headquarters close to the Pacific Ocean. Total Compensation and Benefits Radiant compensates people for impact and invests in those who continue to raise the bar. Radiant’s new hire compensation package includes base salary, substantial equity grants, and comprehensive health benefits. Total compensation and level are determined through a rigorous evaluation of interview performance, experience, education, and qualifications, and are designed to support continued growth as scope, responsibility, and impact expand at Radiant. The best of today’s advanced reactor builders don’t wait for job postings. They join the winning team. If that’s you, contact us directly for immediate opportunities: . We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. Unfortunately, we are unable to provide visa sponsorship at this time. This position involves access to technology that is subject to U.S. export controls. Any job offer made will be contingent upon the applicant’s capacity to serve in compliance with U.S. export controls.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are seeking a Senior Power Electronics Engineer I (2025225) to join our growing spacecraft payload development team. In this position, you will contribute across the entire development life cycle of next-generation power electronics hardware for satellites and space power systems payloads—from working to define power system architectures and trade studies to detailed circuit design, simulation, printed circuit board (PCB) layout, verification and integration testing, production transition, and manufacturing support. JOB DUTIES AND RESPONSIBILITIES • Define electrical power system architecture, and derive power subsystem requirements, • Design DC-DC power converters, power management and control circuits from concept to production release, • Perform detailed design for low to high complexity analog and power electronics circuits ranging from single DC-DC power converters to multi-output power supply modules, • Perform modeling and analysis of analog and power electronics designs including worst-case circuit analysis (WCA), stress analysis, small signal modeling analysis, failure modes and effects analysis (FMEA), reliability analysis, and power integrity analysis, • Develop design verification test plans, requirement compliance matrices, system integration and qualification test plans, and production acceptance test plans for power converters and power supply designs, • Perform board bring-up and design verification testing of analog and power electronics circuits, • Perform system integration, qualification testing, and production release of power supply modules and power systems, • Perform research and monitor power electronics industry trends to drive innovation and generate intellectual property in this area JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Bachelor of Science (BS) degree or higher in Electrical Engineering from an accredited university, • Minimum of 4 years of experience designing analog and power electronics, • Experience with power stage design ofcommon DC-DC power converter topologies (e.g. discrete linear regulators, Buck, Boost, Buck-boost, Flyback), • Experience with voltage mode control and peak current mode control modeling and characterization for DC-DC converters, • Knowledge of control theory and stability of power electronics, including experience characterizing control loops and impedances in the laboratory, • Experience designing power filters for low noise outputs and for power line electromagnetic compatibility (EMC), • Hands-on experience with testing and troubleshooting electronics and power converters using laboratory instruments such as oscilloscopes, impedance analyzers, spectrum analyzers, electronic loads, and signal generators, • Experience with electronics schematic capture and printed circuit board (PCB) layout tools such as Altium, OrCAD, Allegro or Xpedition, • Experience with analysis and simulation tools such as SPICE, LTSPICE, SIMetrix/SIMPLIS, PLECS, Simulink, MATLAB, MathCAD, ANSYS Q3D and SiWave, or HyperLynx, • Excellent written and verbal communication skills PREFERRED EXPERIENCE, • Master of Science or PhD in Electrical Engineering with research focus in power electronics, • Experience designing high-reliability analog and power electronics for automotive, space or defense applications, • Knowledge of space radiation environments and radiation effects in electronics, • Experience in power electronics applications utilizing GaN or SiC wide bandgap power semiconductor devices, • Experience developing design verification test plans, requirement compliance matrices, system integration and qualification test plans, and production acceptance test plans, • Experience performing worst-case circuit analysis (WCA), stress analysis, failure modes and effects analysis (FMEA), and reliability analysis for power supplies, • Experience running board-level power integrity simulation using tools such as Ansys SiWave, or HyperLynx, • Experience with power magnetics modeling, design and laboratory characterization, • Knowledge of soft switching and resonant power converter topologies (e.g. LLC, CLLC, series resonant, phase shifted full bridge, dual active bridge, etc.), • Knowledge of power stage design for inverters and motor drives, • Experience with advanced control schemes for DC-DC power converters (e.g. constant on-time control, boundary mode control, average current mode control)

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are seeking a Senior Power Electronics Engineer II (2025140)to join our growing spacecraft payload development team. In this position, you will contribute across the entire development lifecycle of next-generation power electronics hardware for satellites and space power systems payloads—from leading the definition of power system architectures and trade studies to detailed circuit design, simulation, printed circuit board (PCB) layout, verification and integration testing, production transition, and manufacturing support. DUTIES AND RESPONSIBILITIES * Define electrical power system architecture, and derive power subsystem requirements * Design DC-DC power converters, power conditioning, power management and control circuits from concept to production release * Perform detailed design for low to high complexity analog and power electronics circuits ranging from single DC-DC power converters to multi-output power supply modules * Perform modeling and analysis of analog and power electronics designs including worst-case circuit analysis (WCA), stress analysis, small signal modeling analysis, failure modes and effects analysis (FMEA), reliability analysis, and power integrity analysis * Develop design verification test plans, requirement compliance matrices, system integration and qualification test plans, and production acceptance test plans for power converters and power supply designs * Lead board bring-up and design verification testing of power electronics circuits and modules * Lead system integration, qualification campaigns, and release of analog and power electronics designs into production * Mentor younger engineers and foster knowledge sharing * Perform research and monitor power electronics industry trends to drive innovation and generate intellectual property in this area REQUIREMENTS AND MINIMUM QUALIFICATIONS * Bachelor of Science (BS) degree or higher in Electrical Engineering (or related) from an accredited university * Minimum of 6 years of experience designing analog and power electronics * Experience working with electrical power systems and subsystems, including developing power architecture and power requirements, performing trade studies for size, weight, power, and cost optimization (SWAP-C), selecting power converter topologies, and defining power management and control blocks * Experience with power stage design of common DC-DC power converter topologies (e.g. discrete linear regulators, Buck, Boost, Buck-boost, Flyback, Forward) * Experience with voltage mode control and peak current mode control modeling and characterization for DC-DC converters * Knowledge of control theory and stability of power electronics, including experience characterizing control loops and impedances in the laboratory * Experience designing power filters for low noise outputs and for power line electromagnetic compatibility (EMC) * Experience developing design verification test plans, requirement compliance matrices, system integration and qualification test plans, and production acceptance test plans * Experience performing worst-case circuit analysis (WCA), stress analysis, failure modes and effects analysis (FMEA), and reliability analysis for power supplies * Extensive hands-on experience with testing and troubleshooting electronics and power converters using laboratory instruments such as oscilloscopes, impedance analyzers, spectrum analyzers, electronic loads, and signal generators * Experience with electronics schematic capture and printed circuit board (PCB) layout tools such as Altium, OrCAD, Allegro or Xpedition * Experience with analysis and simulation tools such as SPICE, LTSPICE, SIMetrix/SIMPLIS, PLECS, Simulink, MATLAB, MathCAD, ANSYS Q3D and SiWave, or HyperLynx * Excellent written and verbal communication skills PREFERRED EXPERIENCE * Master of Science or PhD in Electrical Engineering with research focus in power electronics * Experience designing high-reliability analog and power electronics for automotive, space or defense applications * Knowledge of space radiation environments and radiation effects in electronics * Experience in power electronics applications utilizing GaN or SiC wide bandgap power semiconductor devices * Experience running board-level power integrity simulation using tools such as Ansys SiWave, or HyperLynx * Experience designing custom signal and power magnetics, and power filters for low noise and electromagnetic compatibility (EMC) * Knowledge of soft switching and resonant power converter topologies (e.g. LLC, CLLC, series resonant, phase shifted full bridge, dual active bridge, etc.) * Knowledge of power stage design for inverters and motor drives * Knowledge of modeling and control of inverters and motor drives * Experience with advanced control schemes for DC-DC power converters (e.g. voltage mode with feedforward control, constant on-time control, V2 constant on-time control, phase shift modulation, average current mode control) * Experience with isolation and grounding, failure mode effects analysis and fault tolerant design, and thermal management of power electronics * Programming skills to support hardware test and data processing (Python, MATLAB, etc.) CesiumAstro considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate’s work experience, education/training, and key skills. Full-time employment offers include company stock options and a generous benefits package including health, dental, vision, HSA, FSA, life, disability and retirement plans. CesiumAstro is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. Please note: CesiumAstro does not accept unsolicited resumes from contract agencies or search firms. Any unsolicited resumes submitted to our website or to CesiumAstro team members will be considered property of CesiumAstro, and we will not be obligated to pay any referral fees. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Evergreen Posting This is an evergreen position, meaning we are continuously accepting applications as we look to expand our talented pool of project engineers for future openings. If you are passionate about the renewable industry and want to make an impact with a company that values your contributions, this is the place for you. Even if a position isn't immediately available, your application will be reviewed for future opportunities as they arise. Interested candidates are encouraged to apply by submitting their resume and we will keep your application on file and reach out when an appropriate position becomes available. Scope of Job PowerFlex, an EDF Renewables company, is a leading national provider of intelligent onsite energy solutions that support carbon-free electrification and transportation. The Company delivers integrated solar, storage, EV charging, and microgrid systems, to businesses and organizations. As a single full-service provider, PowerFlex customizes clean technology solutions to help clients achieve their energy and sustainability goals. Through the comprehensive PowerFlex X platform, PowerFlex leverages patented smart software to control, monitor, and optimize a client's distributed energy resources to reduce cost and maximize return on investment. The Project Engineer II will be responsible for providing technical support during the detailed engineering & construction stage of projects and will be exposed to all aspects of projects. Traveling on average once a week should be expected. Location This role would be supporting our projects in California and would be required to be a hybrid role out of one of our offices (Mountain View, CA, San Diego, CA, Los Angeles, CA. or New York, NY) Responsibilities * Design and engineer commercial and small utility-scale solar PV projects * Communicate with utilities on an ongoing basis * Stay up-to-date on code and policy changes that impact system design * Coordinate cadence with customer during design phase and construction phase * Coordinate design package with Engineering firms * Coordinate with vendors and lead procurement of materials * Perform inspections during the installation process * Oversee commissioning process * Assist in close out of projects with utility * Perform production analysis for PV systems * Assist Business Development team with pre-contract due diligence Qualifications Education/Experience * Bachelor’s Degree in Engineering (Civil or Electrical preferred) or related major * 2-3 years of experience * Excellent communication and organizational skills * Detail-oriented and strong analytical skills * Proficient in Helioscope, AutoCAD, PVSyst and Excel * Understands permitting & interconnection process * Basic understanding of financial modeling and incentive programs * Experience with Procore and Salesforce a plus * Computer Skills preferred: Salesforce, Microsoft Office applications, Microsoft Project knowledge, CRM, and Smartsheet Skills/Knowledge/Abilities * Ability to work independently, prioritize workload and deliver quality results on time while working on multiple projects simultaneously. * Plan and organize tasks to consistently produce results, with minimal supervision. * Acute attention to detail. * Strong organizational skills. * Commitment to excellence and high standards. * Excellent written and verbal communication skills. * Ability to deal effectively with a diversity of individuals at all organizational levels. * Ability to successfully resolve conflicts both internally and externally Compensation The pay range for this position is $88,560 - $108,240 annually. This position is eligible for PowerFlex's comprehensive Health and Welfare plans including but not limited to medical, dental, vision, 401(k) retirement plan and paid time off. The total compensation for this position may include an annual performance bonus (or other incentive compensation, as applicable). PowerFlex's compensation packages carefully consider a candidate's qualifications, experiences, and education in relation to the position. Physical Requirements Remaining in a seated position. Long hours on the computer keyboard. Prolonged periods of standing and/or walking. Must be able to lift and carry or otherwise move 25 pounds regularly/occasionally. Working Conditions 95% of time is spent in the office environment, utilizing computers (frequent use of various Microsoft software/programs), phones, and general office equipment. 5% of time is spent outside of the office visiting vendors’ and/or internal customers’ sites in addition to attending various conferences and meetings. Applicant Certification and Acknowledgment By submitting this application, you are certifying that all information provided is true and complete to the best of your knowledge. You understand that any false, misleading, or omitted information may disqualify you from consideration for employment or result in termination if already employed. You also release the company from any liability resulting from your failure to provide accurate information. DEI Statement Our company-wide approach to diversity, equity and inclusion is focused on our workplace, community and business outcomes. We believe Diversity, Equity & Inclusion (DEI) is a key component to our mission of delivering renewable solutions and leading the transition to a sustainable energy future. As such, we strive to become a workplace that is diverse, equitable, and inclusive. Our aspiration is to build a culture of belonging and accountability by creating opportunities for growth and continuous learning to ensure progress. EEO Statement PowerFlex is committed to building a diverse and inclusive workplace. We are a proud Equal Opportunity Employer and prohibit discrimination based on age, ancestry, color, disability (mental and physical), exercising the right to family care and medical leave, gender, gender expression, gender identity, genetic information, marital status, medical condition, military or veteran status, national origin, political affiliation, race, religious creed, sex (includes pregnancy, childbirth, breastfeeding, and related medical conditions), and sexual orientation. Privacy Notice to California Job Applicants For information on Privacy Notice to California Job Applicants, click here. Privacy Policy PowerFlex is committed to protecting the privacy of your personally identifiable information, for more information click here. Special Accommodation Language If you require assistance or accommodation while seeking employment with PowerFlex, please contact Human Resources at (209) 227-1511 or . Please note that these communication alternatives are for accommodation requests and not for general employment inquiries. Powered by JazzHR oXBJcMipn9

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit . Your Impact As a Lead Solar Field Service Technician (Utility-Scale / PV Repair), you'll work on large, utility-scale solar farms—not residential or rooftop systems. You'll handle troubleshooting, repair, and maintenance of ground-mount solar systems, central/string inverters, and power plant equipment, while leading a small field crew (4+ techs). You're responsible for making sure work is done safely, correctly, and on schedule. This is a hands-on leadership role for someone with real experience on utility-scale solar sites (megawatt-scale projects). This is a 100% travel position. Core Responsibilities • Troubleshoot and repair utility-scale solar systems, including inverters, combiner boxes, and string circuits, • Perform testing: LOTO, IV curve tracing, megger/insulation testing, IR scans, • Lead and direct 4+ field technicians on active solar farm sites, • Assign work, track progress, and keep jobs on schedule, • Perform operations and maintenance (O&M) on utility-scale solar plants, • Inspect completed work and ensure it meets quality and safety standards, • Enforce safety requirements (OSHA, NFPA 70E) on-site, • Diagnose system issues and resolve them in the field, • Complete work orders, service logs, and required documentation, • Operate and maintain company vehicle and tools, • 3+ years of utility-scale solar experience (solar farms / ground-mount systems), • Experience leading crews of 4+ or acting as lead tech on-site, • Experience working on megawatt-scale PV systems (NOT residential rooftop solar), • Strong electrical troubleshooting and repair skills (inverters, DC systems, power electronics), • Experience with solar O&M / maintenance work, • Working knowledge of OSHA / NFPA 70E safety standards, • Experience using multimeters, meggers, amp clamps, and testing equipment, • Lift and move equipment up to 50lbs, • 100% travel role (frequent travel to solar farm sites), • Work outdoors in all weather conditions (heat, cold, wind, dust) At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range$28—$40 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at !

Job Description At Senra Systems, we believe that the future of manufacturing lies not in automation, but in configuration. We supercharge electrical wire harness manufacturing through software configuration, transforming skilled assembly tasks into high-throughput production lines. We enable customers to design what they want, when they want it and deliver harness builds at record-breaking speed. We are seeking a detail-oriented Strategic Components Buyer to manage the procurement of critical materials and components for our wire harness manufacturing operations. The ideal candidate thrives in a fast-paced, dynamic environment where small teams take on diverse responsibilities. They will be proactive, results-driven, and committed to continuous improvement, with the ability to critically evaluate outcomes and drive performance across the team and company. What you'll own: • Source and procure components such as wires, connectors, terminals, and other materials critical to wire harness manufacturing., • Identify, assess, and onboard new suppliers to expand the supply base while minimizing risks., • Develop and implement cost-saving initiatives and improve supplier performance strategies to enhance production efficiency and profitability., • Foster strong relationships with suppliers to ensure alignment on quality, pricing, and delivery schedules., • Conduct regular supplier audits to evaluate performance, compliance with industry standards, and adherence to company specifications., • Work closely with production and engineering teams to forecast component needs based on upcoming projects, ensuring seamless manufacturing processes., • Ensure all components meet industry-specific and company-quality standards, collaborating with the quality team to address and resolve any quality-related issues., • Stay informed about market trends, material price fluctuations, and potential disruptions to proactively manage risks and maintain supply chain stability., • Experience in wire harness manufacturing or a similar industry is highly preferred, • Strong skills in negotiating with suppliers and managing supplier relationships, • Ability to accurately read and interpret various technical drawings and specifications, • Experience using ERP/MRP systems and proficiency in Microsoft Office Suite, • Familiarity with wire harness components and manufacturing processes is a plus, • Exceptional organizational and time management abilities, with strong attention to detail and analytical skills, • Must be able to lift up to 35 lbs, • Familiarity with industry standards such as IPC/WHMA-A-620, • Compensation will be based on experience, qualifications, and other job-related factors., • Salary Range: $70,000-$120,000, • Unmatched opportunities to drive impact on a friendly and mission-driven team, • Own a piece of the pie with equity participation!, • Comprehensive medical, dental, vision, life and long-term disability coverage, • Flexible Spending Account (FSA) and Dependent Spending Account (DSA) for health-related expenses, • 20 vacation days per year and 12 company holidays for rest and relaxation, • a 401(k) plan to set yourself up for retirement, • Choose a record you love, and we'll add it to our growing vinyl collection!, • $50/month DoorDash credit – lunch is on us!, • Up to $100/month reimbursement for gym memberships, • Fully stocked kitchen with snacks and beverages, • Regular team-building events, lunches, and the occasional breakfast burrito!, • Bright, open office with communal spaces for collaboration and free parking ITAR REQUIREMENTS: • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Pay range$70,000—$120,000 USD

Job Description Icarus was founded on the belief that the Stratosphere is the Forgotten Frontier and that reclaiming it will define the next era of aerospace and what is possible from the sky. We build solar-powered aircraft that fly at 60,000 ft for weeks at a time, delivering persistent, affordable, and scalable presence from this layer of the atmosphere. Mission Re-establish and maintain dominance in the Stratosphere. Dream job • This is for exceptional candidates only. If you meet our bar and believe you'd materially improve Icarus, apply here even if no current role fits you perfectly.Why Icarus, • Meaningful equity, • Top market salary and bonuses, • Health, dental, and vision insurance, • Factory in El Segundo, • Real ownership, real hardware, real flight, • Small team, massive responsibility, • High signal (engineering) to noise (management) culture, • Dream desk setup, • Daily lunch, • Unlimited celsiusThis is not a normal engineering job, • We are pioneers, not corporate managers. Icarus deliberately optimizes for a high signal (engineers) to noise (management) ratio, where engineering, flight, and execution matter more than process, politics, or management overhead, • You will work side by side with the CEO and a small team of world-class builders. You will own your subsystem end to end. Design it. Build it. Break it. Fix it. Validate it in the desert. Fly it. Then do it again, faster, • We expect full extreme ownership. This is a high-trust, no-BS team, and everyone pulls their weight, • We are hiring across the stack: mechanical, aerodynamics, RF, GNC, electrical, avionics, power electronics, energy storage, software, and systems, • We want builders. No hand-holding. No fluff. No fake projects. No slide decks. No sitting in meetings all day. Just raw engineering, real hardware, and real flight, • You must thrive under pressure, learn fast, troubleshoot in the field, and push hardware to its limits. We move fast. We go to Mojave at 4 am in the morning. We expect results and an obsession with quality and speed, • Technical interview, • One-on-one with CEO The salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are considered part of Icarus' total compensation package. We're an equal opportunity employer. We welcome all applicants without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

Job Description Job Description: The Estimating Project Engineer is dedicated to supporting operations through quantity digital takeoffs; bid procurement; preliminary value analysis; constructability reviews; scope, cost, and time value engineering; scope and budget development; and the timely contracting of projects. An individual in this position should have strong interpersonal and communication skills, as well as a high technical/engineering ability. An understanding of Civil, Architectural, Structural, and Mechanical/Electrical/Plumbing (MEP) drawings, and of Public Utilities, Fire Systems, and geotechnical reports, is required. This position will require on-site job set up responsibilities. This is a salaried position with a minimum of 40 hours/week required. As with any salaried professional position the actual number of hours required will be determined by workload. Functions of the Position:  Seeks out new vendors and subcontractors for inclusion in company’s Qualified Contractors list.  Coordinates with subcontractors, vendors, and internal personnel to schedule pre/post-development site inspections in preparation of bid requests.  Prepares sites for Pre-construction by coordinating trades and securing permits for all temporary utilities.  Provide detailed take-offs of Permit Submittal Set for more accurate bidding in Plan Development Budget Phase.  Develop a fully detailed scope of work for each construction trade.  Prepare a complete and detailed construction budget for each project. Candidate MUST possess in-depth knowledge of the construction 16 divisions.  Manages the Request for Proposal (RFP) process in conjunction with the Project Managers, including the review, coordination, and negotiation of bids for budgeting purposes.  Manages the RFI process to ensure complete bids are received as to mitigate Change Orders after contracts are issued.  Prepare all necessary request documents for the Purchasing Department.  Assists with document control and permit processing with various City and Jurisdictional offices.  Assist Construction Project Manager with the procurement of additional bids after the commencement of construction.  Manage and update all cloud-based services (BuilderTrend/DropBox) to ensure contractors are provided with accurate plans.  Experienced in pulling permits with LADBS, Bureau of Engineering, and Urban Forestry.  Experience with high-end hillside residential scope of work and able to verify scope with all vendors.  At plan development, prepares contractor bid package and procures bids/estimates.  Computes cost factors used for management purposes such as planning, organizing, and scheduling work; selecting vendors or subcontractors; and determining cost effectiveness.  Works with Construction Project managers to fully assess and detail changes in the field that will affect project budget.  Prepares preliminary funding budget for approval and follows through with changes until final budget is approved by Management.  Negotiates contractor's price and issues contracts.  Analyzes completed projects to compare estimated costs to actual costs to determine the reason for any discrepancies, and then provides improvement recommendations to cost estimating procedures to reduce future discrepancies. Education/Experience: Bachelor's degree from a four-year college or university. Civil Engineering degree preferred. Extensive, documented experience in residential construction is required. Skills:  Must be qualified, with a minimum of 4 years of verifiable experience. Degree in related field required: Engineering Degree is preferred.  Understanding of Civil, Architectural, Structural, and MEP drawings, and of Public Utilities, Fire Systems, and geotechnical reports, is required.  Ability to produce accurate take-offs and cost analysis of labor and materials using various software programs.  Exceptional motivational and communication skills capable of dealing w/employees, owners, architects, engineers & project subcontractors are required.  Knowledge of all residential construction trade requirements and pricing, both for rehabilitation and new construction.  Strong familiarity with project estimation, scheduling and permitting  Advanced proficiency with MS Office applications preferred; Plan Swift, Builder Trend and Sage Contractor experience a plus (training will be provided otherwise)  Highly organized and able to work accurately and independently  Self starter with ability to multi-task Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Competencies: To perform the job successfully, an individual should demonstrate the following competencies:  Initiative - Volunteers readily; Undertakes self-development activities; Seeks increased responsibilities; Takes independent actions and calculated risks; Looks for and takes advantage of opportunities; Asks for and offers help when needed.  Cost Consciousness - Works within approved budget; Develops and implements cost saving measures; Contributes to profits and revenue; Conserves organizational resources.  Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals; Completes tasks on time or notifies appropriate person with an alternate plan. Company DescriptionWe are a small but thriving company, interested in hiring and keeping the best employees possible.We are a small but thriving company, interested in hiring and keeping the best employees possible.

Job DescriptionSystems Integration Tech Department: Engineering Reports to: Electrical Engineering Manager Pay Range: $45 to $68 an hour Shift: Monday - Thursday 10 hour shifts We are dedicated to recruiting and developing diverse talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers mission and quest for professional growth. RPM provides an inclusive, engaging environment designed to empower employees and promote life-work success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. Essential Functions • Members of our electrical design team are responsible for all aspects of design throughout the engineering process, • Perform detailed design: System, harnessing, CABU W6 ANS circuit board, • Hands on work in assembly, test, electrical wiring, connectors, cabling, harnesses and various RPM components, • Support fabrication and testing of digital and analog circuits for pedestal mount, servo, and processor systems, • Coordinate and follow through all phases of product/project, • Research component obsolescence, • Familiarity with digital and analog electronics theory and applications is preferred, • Having knowledge of electronics design environment: Orcad Schematic capture, FPGA design/development is preferred. AutoCAD is a plus Excellent written and oral communication skills Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Education and/or Experience • Bachelors or advanced degree in Electrical Engineering is required, • A minimum of 7 years of related experience in analog, digital, microprocessor/micro Controller application circuit design, preferably in an aerospace environment., • Familiarity with digital and analog electronics theory and applications is preferred, • Familiarity with microprocessor/micro-controller base design and/or microprocessor/micro-controller COTS product application is preferred., • Analog design with filter, signal conditioning, A/D and D/A circuit is preferred, • Digital design with CPLD and FPGA using VERILOG preferred., • Understanding high voltage power supply application is preferred, • Having the ability to research component obsolescence and provide recommendation is preferred., • Problem Solving Identifies and resolves problems in a timely manner; gathers and analyzes information skillfully; works well in-group problem solving situations., • Customer Service Responds promptly to customer needs; solicits customer feedback to improve service; responds to requests for service and assistance; meets commitments., • 401(k), • Dental insurance, • Health insurance, • Paid time off Work Location: In person

Job DescriptionADDITIVE ENGINEERING INTERNSHIP/CO-OP (SUMMER/FALL 2026) Freeform builds AI-native manufacturing systems that unify software, hardware, and physics to produce industrial-scale parts at the speed of human ideation. By treating manufacturing as a single integrated system, we unlock a new era of innovation where complex hardware is designed, built, and scaled without limits. As an Additive Engineering Intern at Freeform, you will contribute to the development and scaling of our advanced metal 3D printing processes, including design for additive manufacturing (DFAM) feedback, print file preparation, toolpath automation, part quality analysis, and end-to-end process improvement. You will work closely with mechanical, electrical, software, and manufacturing engineers to support all stages of print development for high-volume production. Interns at Freeform own meaningful cradle-to-grave projects. Using first-principles thinking, you will help define test methods, evaluate solutions, iterate quickly, and synthesize information from engineering drawings, in-situ machine data, post-processing results, and inspection data to draw conclusions that improve printing and downstream machining processes. 3D printing experience is not required to be successful here - we look for smart, motivated, collaborative engineers who love solving hard problems and creating amazing technology! Responsibilities: • Own a cradle to grave project that delivers meaningful impact to critical print factory capabilities or customer print workflows, • Support all stages of print development including design for additive manufacturing feedback, file preparation, printing, post-processing, and quality control, • Analyze in-situ data and post-print part quality to drive continuous improvement in system performance, • Use first-principles thinking to define problems, develop test methods, evaluate solutions, iterate, and provide technical recommendations Basic Qualifications: • Currently enrolled in a bachelor's degree in mechanical or aerospace engineering from an ABET accredited university or college, • Hands on design experience from internships or engineering clubs such as FSAE, Baja SAE, solar car, rocket club, robotics club, or similar, • Strong grasp of mechanical engineering fundamentals and comfortable taking a first-principles approach to solving problems Nice to Have: • Advanced degree (Master's, PhD) in mechanical or aerospace engineering, • Experience with metal 3D printing or additive manufacturing processes, • Experience with process development for metal additive manufacturing, • Scripting experience in MATLAB or similar tools for toolpath generation, • Experience with DFM and GD&T, • Experience with CNC machining, • Passion for improving the state of metal 3D printing, • Comfortable working in fast-paced, ambiguous environments and iterating quickly (comfortable building the plane as we fly it), • Strong communicator who collaborates across disciplines and proactively seeks support when needed, • Willing to take ownership of tasks big and small, with a hands-on, problem-solving mindset, • Strong work ethic with a refuse-to-fail mindset, • Demonstrated indicators of excellence and/or achieving success against adversity (i.e. top academic performance, leadership in engineering clubs, first-generation college student, or other examples of resilience and achievement) Location: * Based in Hawthorne, our vertically integrated facility brings technology development, R&D, and production together under one roof. We operate at the center of LA's deep tech ecosystem, surrounded by some of the most ambitious hardware innovation happening anywhere in the country. What We Offer: • We have an inclusive and diverse culture that values collaboration, learning, and making deliberate data-driven decisions, • We offer a unique opportunity to be an early and integral member of a rapidly growing company that is scaling a world-changing technology, • Compensation and Benefits, • The compensation for this role is $30/hour, • Relocation assistance provided, • Free daily catered lunch and dinner, and fully stocked kitchenette, • Casual dress, flexible work hours, and regular catered team building events, • Freeform is an Equal Opportunity Employer that values diversity; employment with Freeform is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Senior Engineering Technician Radiant is seeking a Senior Engineering Technician who will have the opportunity to apply a variety of skillsets while fabricating and assembling our development microreactor unit. Additionally, you will be instrumental in building large and small-scale test rigs, making prototype parts and tooling, sourcing tools to execute builds, material handling, and more. You will be the fourth foundational technician team member at Radiant with a high degree of autonomy and initiative is needed. You will build and maintain our prototype shop in our new El Segundo headquarters and use a variety of tools as it comes to shop activities (Machining, welding, metal forming, electrical work, plumbing). You’ll have the opportunity to bring significant technical contribution to the team and lead us to the successful fueling of a new reactor design in over 50 years by 2026. Responsibilities and Duties: * Fabricate piece parts to print using shop equipment: mill, lathe, welders, metal forming tools, hand tools, etc. * Own the assembly and commissioning of test rigs and production builds. * Perform troubleshooting and root cause investigation of mechanical, electrical, thermal, and pneumatic issues. * Partner and collaborate with engineers to develop solutions and improvements for hardware design, fabrication, and assembly. * Abide by a high level of operational standards regarding safety, reliability, and cleanliness. * Perform other tasks as needed. We are a small company, and you may need to perform tasks outside your normal duties and responsibilities. Required Skills and Qualifications: * High school diploma or equivalent certificate. * 5+ years of fabrication or assembly work experience. * Positive attitude and able to work well on a team. * Able to work independently and efficiently with minimal supervision. * Able to stay organized and strong attention to detail. * Able to use traditional inspection tools for the inspection of parts and assemblies. * Able to read mechanical drawings and interpret tolerances. * Able to read and interpret fluid or electrical schematics. * Experienced in manufacturing with the use of machine tools, saws, grinders etc. * Physical effort including standing, lifting, and carrying equipment up to 50 lbs. unassisted. * Able to work in outdoor environments as needed. * Ability to work at elevated heights occasionally (scissor lifts, ladders, etc.) * Ability to travel on occasion for offsite support. Desired Skills and Qualifications: * Experience operating and working with high pressure and temperature systems. * Experience with MIG and TIG welding. * Experience with CNC programming and manual machine operation. * Experience with GD&T interpretation preferred. * Knowledge/experience working with electrical components and high voltage systems. * Experience operating safely in shop environments. * Experience lifting, rigging, and preparing for heavy crane operations of complicated parts. * Proficient computer skills; comfortable with using email and the Microsoft Office suite. Additional Requirements: * Must be willing to work extended hours and weekends as necessary to achieve company goals. * Must work 100% onsite at El Segundo HQ. Benefits and Perks * Stock: Substantial incentive stock plan for all full-time employees. * Medical: 100% up to base silver level plan for employee + 50% dependents, offers up to Platinum plans. * One Medical: Sponsored memberships for employees and their dependents. * Vision: 100% top tier plan coverage + 50% for dependents. * Dental: 100% top tier plan coverage, orthodontia extra, 50% for dependents. * Voluntary life, accident, hospital, critical illness, commuter and FSA/HSA are offered as employee contributed benefits. * 8-weeks of paid parental leave for all parents. Additional paid pregnancy leave for CA employees. * Daily catered lunch. Free snacks and drinks. * Flexible PTO policy. Remote workday allocation. * Company and team-bonding events, happy hours and in-person camaraderie. * Beautiful El Segundo headquarters close to the Pacific Ocean. Total Compensation and Benefits Radiant compensates people for impact and invests in those who continue to raise the bar. Radiant’s new hire compensation package includes base salary, substantial equity grants, and comprehensive health benefits. Total compensation and level are determined through a rigorous evaluation of interview performance, experience, education, and qualifications, and are designed to support continued growth as scope, responsibility, and impact expand at Radiant. The best of today’s advanced reactor builders don’t wait for job postings. They join the winning team. If that’s you, contact us directly for immediate opportunities: . We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. Unfortunately, we are unable to provide visa sponsorship at this time. This position involves access to technology that is subject to U.S. export controls. Any job offer made will be contingent upon the applicant’s capacity to serve in compliance with U.S. export controls.

Job DescriptionHermeus is a high-speed aircraft manufacturer focused on the rapid design, build, and test of high-Mach and hypersonic aircraft for the national interest. Working directly with the Department of Defense, Hermeus delivers capabilities that will ensure that our nation, and our allies, maintain an asymmetric advantage over any and all potential adversaries. The Manufacturing Team at Hermeus are the boots on the ground. We have a vast array of experiences ranging from welding, additive, tube bending, machining, integration, and avionics. We are a lean team who are responsible for building a vehicle that will fly. We provide crucial design feedback to our engineering team and can rapidly iterate on design and assembly. The Vehicle Integration Technician is responsible for the integration of all secondary structure, avionics, and propulsion components and systems to the vehicle’s primary structure. The task requires both avionics and mechanical integration skills along with pneumatic and avionics checkout activity.Responsibilities • Stage, set up, assemble, test and install flight hardware, • Use precision calibrated toolsHands on operations with both large and small fragile assemblies, • Heavy rigging for large assemblies, • Operate personnel platforms (boom lifts, scissor lifts, etc.), • Read and interpret engineering drawings and work instructions, • Perform work according to procedures, specifications, and test instructionsUse various mechanical tools without prior instruction, • Collaborate with production engineers to develop and document integration processes, • Ensure all production services are performed on time, safely and in a professional manner, • Perform fluids and pneumatic testingBasic Qualifications, • High school diploma or equivalency certificate, • 2+ years of professional propulsion, mechanical, automotive, electrical or avionics hardware installation experience, • Experience in the aerospace industry, aviation, military or other high-reliability operating environment, • Knowledge of pressure, temperature and flow measurement devices, mechanical and electrical systems, and propulsion engines, • Skill in operating and manipulating machinery and various hand and power tools requiring manual dexterityPreferred Skills and Experience:, • FAA Airframe and PowerPlant license, • Experience with forklifts, cranes and heavy transport equipment, • Ability to use precision measuring instruments, • Ability to rapidly change roles/responsibilities while working in a high-paced, challenging work environment, • Proficient with computers and the ability to use MS Office, • Ability to work effectively in a team environmentAdditional Requirements, • Ability to lift at least 25 lbs unassisted, • Willing to travel up to 25%, • Ability to climb ladders and work in confined spaces, • Willing to work all shifts, overtime, and weekends as neededThe salary information provided is a general guideline only. Hermeus takes various factors into account, including, but not limited to, the position's scope and responsibilities, the candidate's professional background, education and training, essential skills, and market and business considerations, when presenting a job offer. Salary is only one part of our total compensation and benefits package. Hermeus offers competitive salary and equity, unlimited PTO policy, paid parental leave, potential for year-end bonuses, and more! 100% employer-paid health care401k & Retirement PlansWeekly Paid Office LunchesFully stocked breakroomsStock Options Paid Parental LeaveThe compensation information provided is a general guideline only. Hermeus takes various factors into account, including, but not limited to, the position's scope and responsibilities, the candidate's professional background, education and training, essential skills, and market and business considerations, when presenting a job offer. Compensation is only one part of our total rewards package. Hermeus offers competitive base pay and equity, generous parental leave, potential for year-end bonuses, and more! • 100% employer-paid health care • 401k & retirement plans • Weekly paid office lunches • Fully stocked breakrooms • Stock options • Paid Parental Leave • Flexible PTO (exempt) and generous accrued PTO (non-exempt), plus 12 federal holidays off U.S. EXPORT CONTROL COMPLIANCE STATUS The person hired will have access to information and items subject to U.S. export controls, and therefore, must either be a “U.S. person” as defined by 22 C.F.R. § 120.62 or otherwise eligible for deemed export licensing. US persons include U.S. citizens, U.S. nationals, lawful permanent residents (green card holders), and asylees and refugees with such status granted, not pending. EQUAL OPPORTUNITYHermeus is an Equal Opportunity Employer. Employment decisions at Hermeus are based solely on merit, competence, and qualifications, without regard to race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability, or any other legally protected status. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Sans is on a mission to build the next great consumer hardware brand, with a laser focus on products that help people live healthier lives at home. We started with a category-leading air purifier before expanding to a best-in-class countertop water purifier that actually works to eliminate harmful contaminants - and our product roadmap is just getting started. We're a small, ambitious team that believes deeply in our ability to create a meaningful consumer brand. We move fast, learn quickly, and consistently outperform much larger competitors. The Director of Hardware Product Development will own the development of Sans' hardware products from concept through production. This person will act as the product owner for hardware development, working closely with factory partners and outside engineering resources to bring new products to life. You will lead the process, the decisions, the timelines, and the quality bar across our hardware portfolio. You will be the senior hardware voice in the company, responsible for translating product goals into clear development plans and ensuring our partners execute to the standard Sans expects. This role sits at the center of product development, working with Director of Operations, Head of CX, and external partners managing manufacturing, firmware, software, and industrial design to deliver connected devices that are well-designed, manufacturable, reliable, and ready to scale. This is a senior individual contributor role reporting directly to the Founder and CEO. The ideal candidate will have deep experience bringing consumer hardware products to market through ODMs, OEMs, and outside development partners. They should combine strong technical judgment with strong product sense, know how to manage the realities of outsourced development, and be comfortable owning both strategy and execution. They should be highly collaborative, detail-oriented, and able to keep complex programs moving across multiple stakeholders and time zones. Responsibilities and Duties • Own hardware product development end-to-end, leading programs from concept through EVT, DVT, PVT, and mass production while maintaining the timeline, decision-making, and quality bar at each stage, • Act as the product owner for hardware development, translating company priorities and product requirements into clear direction for factory partners and external engineering firms, • Partner cross-functionally with internal and external partners across operations, firmware and software development, and industrial design to define product requirements, resolve tradeoffs, and ensure hardware decisions support the full product experience, • Lead a rigorous development process that includes design reviews, FMEA, and strong DfX discipline across cost, manufacturability, reliability, supply chain, and quality, • Co-own factory and supplier relationships in Asia in partnership with Director of Operations, building strong operating rhythms with current partners, holding them accountable to Sans standards, and helping identify new partners as the product line expands, • Oversee prototyping, testing, validation, and issue resolution to ensure products meet performance, reliability, and manufacturability requirements before launch, • Own hardware compliance and certification across FCC, CE, UL, and UK PSTI requirements, and work with outside partners to ensure products are properly tested and documented, • Serve as the senior point person for hardware-related field issues, helping diagnose root causes, prioritize fixes, and drive corrective action with partners when problems arise after launch, • Contribute to product strategy and roadmap decisions by bringing a practical view on technical feasibility, cost, development complexity, and launch timing, • Drive clarity across active programs so leadership has a clear view of status, risks, tradeoffs, and critical path, • Bachelor's Degree in Electrical Engineering, Mechanical Engineering, Product Design Engineering, or a related technical field, or equivalent practical experience, • 8+ years of experience developing consumer hardware products, including taking multiple products from concept through production with outsourced design, development, and manufacturing partners, • 3+ years in a role with clear ownership over hardware programs, product decisions, or cross-functional execution, • Strong technical foundation in hardware development, including enough fluency in circuit design, PCB architecture, embedded systems, and hardware debugging to make good decisions and challenge partners when needed, • Experience with connected devices, wireless protocols such as Wi-Fi and Bluetooth, and the hardware-software interface required for IoT products, • Deep familiarity with phase-gate hardware product development and a strong sense for where programs usually slip, break, or create downstream problems, • Experience managing ODM, OEM, and supplier relationships in Asia, with the judgment and persistence required to maintain quality through external partners, • Experience with overseas manufacturers, • Working knowledge of consumer hardware compliance requirements, including FCC, CE, and UL. Experience with UK or EU compliance frameworks is a plus, • Willingness to travel regularly to Asia 2-4 times per year to work closely with manufacturing and development partnersInterpersonal, • Strong leadership and communication skills, with the ability to drive alignment across internal stakeholders and external partners, • Ability to work effectively across functions in a fast-moving environment with limited structure and changing priorities, • Highly organized and comfortable managing multiple workstreams, dependencies, and deadlines at once, • Strong product judgment and a practical, hands-on approach to problem solving, • Base salary $160,000-$180,000 based on experience, plus bonus and equity, • Option for fully paid medical, dental, and vision, • Opportunity to contribute to 401k, • Unlimited PTO plus 11+ paid holidays, • Free Sans products, • LA-based hybrid team (3 days/week), office in Culver City

Job Description Compensation: $20 - $28 an hour. We are Southern California’s leader in uniform and linen services – family-owned and operated since 1932. Our proud heritage of quality service started 89 years, and the operation has remained in the family ever since for 4 generations. Medico Professional Linen Service is a uniform and linen service specializing in private practice and medical clinic businesses in the Southern California area. This operation is the largest linen and uniform service specializing in this niche in the United States and is now being mirrored by our industry peers in other regions of the country. Our values of team work, quality, and service have been at the heart of what we do and have strengthened our brands and business relationships. Job Summary: This position is responsible but not limited to new Installs, repairing and maintaining plant equipment and property as directed by the Chief Engineer. Maintaining inventory supplies and preparing maintenance records. Ensures operation of machinery and mechanical equipment by completing preventive maintenance requirements on engines, motors, pneumatic tools, conveyor systems, and production machines; following diagrams, sketches, operations manuals, manufacturer's instructions, to engineering specifications. Job Responsibilities: • Locates sources of problems by observing mechanical devices in operation; listening for problems; using precision measuring and testing instruments., • Removes defective parts by dismantling devices; using hoists and hand and power tools; examining form and texture of parts., • Determines changes in dimensional requirements of parts by inspecting used parts; using rules, calipers, micrometers, and other measuring instruments., • Adjusts functional parts of devices and control instruments by using hand tools, levels, plumb bobs, and straightedges., • Controls downtime by informing production workers of routine preventive maintenance techniques; monitoring compliance., • Fabricates repair parts by using machine shop instrumentation and equipment., • Maintains equipment, parts, and supplies inventories by checking stock to determine inventory level; anticipating needed equipment, parts, and supplies; placing and expediting orders; verifying receipt., • Conserves maintenance resources by using equipment and supplies as needed to accomplish job results., • Prepares mechanical maintenance reports by collecting, analyzing, and summarizing information and trends., • Maintains safe and clean working environment by complying with procedures, rules, and regulations., • Morning start-up and/or evening shutdown of all equipment including the boilers, pumps/tanks/valves, air compressors, water softeners, soil systems, conveyor systems, tunnel washers, conventional washers, dryers, feeder/ironer/folder systems, small piece folders, steam tunnels, cart washers and all other plant equipment Required Qualifications and Experience: Education: • Must be able to read, write and communicate effectively., • Basic computer skills, • Experience working on machinery, Electrical, plumbing, welding, carpentry and boiler applications., • Ability to trouble shoot from operation manuals, manufactures instruction electrical schematics at a basic level., • Must be able to walk or stand for long periods at a time during a full time shift., • Handling the maintenance task of stooping, pulling, or pushing and working in cramped spaces., • Be able to lift, push or pull 50 lbs. or more. Working conditions: Some exposure to extreme degrees of heat, noise, dust and dirt. Job Type: Full-time Salary: $20.00 - $28.00 per hour Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off, • Vision insurance Schedule: • 8-hour shift + Overtime, • Must be available any day of the week including weekends. Work Location: In person American Textile Maintenance Co. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job DescriptionELECTRICAL ENGINEER (NEW GRAD SUMMER 2026) Freeform builds AI-native manufacturing systems that unify software, hardware, and physics to produce industrial-scale parts at the speed of human ideation. By treating manufacturing as a single integrated system, we unlock a new era of innovation where complex hardware is designed, built, and scaled without limits. As an Electrical Engineer at Freeform, you will play an integral role in the design and development of custom electronics that bring our advanced metal 3D printing factory systems to life. You'll work with a talented engineering team from some of the world's most innovative companies on electrical system design, development, and integration efforts across the factory systems, with a specific focus on PCB and compute system design. You will use a first-principles approach to solving problems and tackling new areas within electrical engineering that you may not have directly worked on before. The ideal candidate is capable of running projects from cradle to grave and has the ability to work effectively with other engineering disciplines. 3D printing experience is not required to be successful here - rather we look for smart, motivated, collaborative engineers who love solving hard problems and creating amazing technology! Responsibilities: • Rapidly design, develop and test highly reliable electronics and PCBs, • Model and simulate circuit designs for analysis and performance, • Contribute to electrical architecture, product requirements, component selection, analysis, schematic capture, prototyping, bring-up, debugging, documentation, product management, productization, manufacturing, and test, • Drive component selection, analysis, schematic capture, prototyping, bring-up, debugging, documentation, manufacturing, and test, • Hands-on debugging of the unexpected via the use of laboratory test equipment, custom instrumentation, and testing setups Basic Qualifications: • Bachelor's degree in electrical engineering or computer engineering from an ABET accredited university or college, • Hands on electrical experience from internships or engineering clubs such as FSAE, Baja SAE, solar car, rocket club, robotics club, or similar, • Well-versed in electrical engineering fundamentals and comfortable taking a first-principles approach to solving problems Nice to Have: • Advanced degree (Master's, PhD) in electrical engineering, • Familiarity with industrial automation technologies, robotics, spacecraft avionics, or similar high-performance electromechanical system, • Experience with sensors, embedded microcontroller design and firmware, and FPGA hardware and software development, • Experience with high-speed data acquisition systems, high-accuracy motion systems, high-speed scanning systems, or similar camera/telemetry-based control systems, • Comfortable working in fast-paced, ambiguous environments and iterating quickly (comfortable building the plane as we fly it), • Strong communicator who collaborates across disciplines and proactively seeks support when needed, • Willing to take ownership of tasks big and small, with a hands-on, problem-solving mindset, • Strong work ethic with a refuse-to-fail mindset, • Demonstrated indicators of excellence and/or achieving success against adversity (i.e. top academic performance, leadership in engineering clubs, first-generation college student, or other examples of resilience and achievement) Location: * Based in Hawthorne, our vertically integrated facility brings technology development, R&D, and production together under one roof. We operate at the center of LA's deep tech ecosystem, surrounded by some of the most ambitious hardware innovation happening anywhere in the country. What We Offer: • We have an inclusive and diverse culture that values collaboration, learning, and making deliberate data-driven decisions., • We offer a unique opportunity to be an early and integral member of a rapidly growing company that is scaling a world-changing technology., • Benefits, • Significant stock option packages, • 100% employer-paid Medical, Dental, and Vision insurance (premium PPO and HMO options), • Life insurance, • Traditional and Roth 401(k), • Relocation assistance provided, • Paid vacation, sick leave, and company holidays, • Generous Paid Parental Leave and extended transition back to work for the birthing parent, • Free daily catered lunch and dinner, and fully stocked kitchenette, • Casual dress, flexible work hours, and regular catered team building events, • Compensation, • Our intent is to offer a salary that is commensurate for the company's current stage of development and allows the employee to grow and develop within a role., • In addition to the significant stock option package, the estimated salary range for this role is $105,000-$120,000. The upper end of the range is reserved for individuals who demonstrate exceptional experience, deep domain mastery, and a proven history of high performance and impact., • Freeform is an Equal Opportunity Employer that values diversity; employment with Freeform is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. What To Expect: • Thank you for your interest in our new graduate opportunity! We truly appreciate your application and enthusiasm to join our team. Please note that our interview process will include 2-3 rounds of interviews.

Job Description Electrical Engineering Team Lead Fully Remote (Need to live in CA) Direct Hire/ Permanent Placement, $100k-$180k w/ annual raise and bi-annual bonus, Unlimited PTO $5,000/ year childcare assistance program, 401K w/ 3% company match, PC and Monitor provided THE CLIENT Small MEP+ firm specializing in Multi-unit residential apartment complexes, mixed-use, and commercial buildings. OVERVIEW Senior Electrical Engineer / Electrical Team Lead to join our growing MEP engineering team and lead the Electrical engineering department. The ideal candidate is a licensed Professional Engineer (PE) with a degree in Electrical Engineering and significant experience designing electrical systems for commercial and/or residential building projects. This role will be responsible for leading electrical design efforts, mentoring junior engineers, coordinating with multidisciplinary teams, and ensuring high-quality engineering deliverables. The candidate should have strong technical expertise in building electrical systems and a demonstrated ability to manage project timelines and client relationships. ROLE/ RESPONSIBILITIES • Lead the design and engineering of electrical systems for building projects including: power distribution, lighting, fire alarm, emergency power in accordance with NEC codes, CA Electrical code, Title 24, and standards • Electrical equipment calcs, selection, and layout of switchgear, transformers, electrical panels and emergency generators, • Design recommendations, decisions, planning, delegating, reviewing, and QC of work from junior staff, • Coordinate with architects, mechanical engineers, structural engineers, and clients, • Manage project schedules, budgets, and deliverables, • Participate in project meetings and design reviews, • Mentor, guide, and supervise junior electrical engineers REQUIRED SKILLS AND EXPERIENCE • Bachelor’s degree in Electrical Engineering, Architectural Engineering, or similar w/ 8+ yrs experience, • REVIT, AutoCAD, SKM, ETAP, • PE

Job Description Role Overview: As an Electrical Engineer II, you will own the end-to-end design of complex electrical systems, from initial concept and architecture through hardware bring-up and testing. Joining a growing organization, you'll have the opportunity to guide technical decisions and tackle mission-critical challenges across projects in multiple industries, including commercial space, aviation, renewable energy, and medical devices. This role is ideal for engineers who are passionate about technical ownership, cross-functional collaboration, and building systems that matter. What You Will Do: • Support the design, architecture, and development of electronic systems, • Work closely with internal engineering teams and external customers to build solutions across multiple industries, • Take ownership from schematic capture and PCB layout through hardware bring-up and troubleshooting, • Bachelor's degree in Electrical Engineering, Computer Engineering, Physics, or a related field, • 3+ years of experience with end-to-end electronics design, including requirements generation, schematic design, board layout, design verification and acceptance testing, • Ability to collaborate effectively with an interdisciplinary team, • Demonstrated passion for engineering, • Strong problem-solving skills and initiative to overcome technical challenges, • Excellent written and verbal technical communication skills; ability to explain design decisions and component selections, • Master's Degree in Electrical Engineering, Computer Engineering, Systems Engineering, Physics, or a related field, • Experience in a team-based design and build project (e.g., Formula SAE, Solar Car, CubeSat, etc.), • Experience designing PCBs for high-reliability applications (e.g., aerospace, automotive, medical), • Compensation range of $132,070-$165,090 + equity incentive plan, • Flexible work hours and work from home policy, • 100% employer-paid health insurance (Medical, Dental, Vision) for employees + 50% dependent coverage, • Unlimited paid time off policy, 11x paid company holidays, 12x paid sick days, • 401(k) retirement account and employer matching (Safe Harbor 4%), • Generous paid parental leave, • Relocation assistance available if 50+ miles away from the office, • Electric Vehicle (EV) charging ports Second Order Effects practices a "first principles approach" to technical problems. We break down complex challenges to their most fundamental components. This enables us to find solutions across industries, use cases, and engineering functions. As an engineering consulting firm, we focus on solving the right problems and building teams to take them on. Going beyond just resolving tough issues, we want to answer impactful questions. Additional Requirements: • Applicant must be willing to work 40 hours a week on-site in El Segundo, California, USA, • Applicant must be eligible to work on export controlled projects If you don't meet 100% of the preferred skills and experience, we encourage you to still apply! Second Order Effects is proud to be an Equal Opportunity Employer; employment with SOE is governed on the basis of excellence and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability, or any other legally protected status.

Job Description Claros is a power management solutions company that is innovating at the intersection of power and compute to make AI more sustainable and widely available. By driving down the cost and complexity of power delivery and leveraging innovative hardware and software, the company seeks to decrease energy consumption, optimize power delivery, increase compute performance, and maximize the efficiency of AI operations. Electrical Engineer Intern - Power Electronics & Controls About Claros Claros enables Grid-to-Chip power infrastructure solutions for next generation Data Centers. Our mission is to transform power management to meet the global energy demand created by big data, artificial intelligence and ML. Through our innovative power delivery platform, our technology helps next generation data centers implement and operate server platforms that identify, control, and optimize power and energy management systems to meet real-world end user demands. We serve government and commercial customers. About The Team We are open-minded, fast paced, problem solvers that value open dialogue and candor. Our passion is to challenge the status-quo and we embrace transformational thinking. Our response is never "no, but…." instead "yes, if….". We are mindful of our personal and organizational blinders and try to build an environment where our team members are At Their Best. What You Will Do • Support control design and validation using MATLAB/Simulink alongside senior engineers., • Participate in rapid prototyping, iteration, and troubleshooting in a fast-moving startup environment., • Pursuing or recently completed a Bachelor's degree in Electrical Engineering, Computer Engineering, or related field., • 0–2 years of experience (through internships, coursework, research, or personal projects) in:, • Power electronics, • Control theory, • Digital systems, • MATLAB/Simulink, • Comfort working in environments with ambiguity, changing requirements, and limited process., • Willingness to learn quickly, take ownership, and ask good questions., • Exposure to mixed-signal circuit design, including power management, ADCs/DACs, and op-amps., • Familiarity with microcontrollers, processors, or FPGAs., • Programming experience in Python and/or C/C++. Our Red Cell Partners Benefits: • Career track opportunity with potential for rapid advancement with strong performance as the firm grows, • 100% employer paid, comprehensive health care including medical, dental, and vision for you and your family., • Paid maternity and paternity for 14 weeks at employees' normal pay., • Unlimited PTO, with management approval., • Opportunities for professional development and continued learning. By submitting an application, you acknowledge that Red Cell Partners, LLC ("Red Cell") uses third-party service providers to facilitate its recruitment and hiring processes. These providers include applicant tracking systems, candidate verification platforms, and fraud detection tools (collectively, "Hiring Platforms"). Your application materials, including your résumé, cover letter, work samples, responses to application questions, and any other information you submit, may be transmitted to and processed by these Hiring Platforms for the following purposes: • Managing and administering your application throughout the hiring process;, • Verifying the accuracy and authenticity of application materials, including by cross-referencing information you provide against publicly available sources and proprietary databases; Red Cell requires its Hiring Platform providers to process your information solely for the purposes described above and in accordance with applicable law. Your information will be retained only for as long as necessary to fulfill these purposes and any applicable legal obligations, after which it will be deleted in accordance with Red Cell's data retention policies. For more information about how your data is used, please refer to our Privacy Policy and Applicant Privacy Notice.

Job DescriptionDCX-CHOL Enterprises Inc. is a leading source for high performance interconnect products. We design, engineer, and produce cable assemblies, wiring harnesses, conduit assemblies, custom connectors, wire enclosures and much more! We are privately held American owned Small Business made up of five (5) vertically integrated manufacturing and assembly divisions, each with their own history, specializations and products. Teletronic Division of DCX-CHOL Enterprises Inc. is actively seeking a Project Engineers with the following qualifications. The Project / Manufacturing Engineer is responsible for managing manufacturing jobs from initial release through final delivery. This role serves as the primary engineering point of contact for assigned work orders, ensuring manufacturability, schedule adherence, quality compliance, and timely issue resolution throughout the production lifecycle. The position requires strong project management skills, cross-functional coordination, and hands-on manufacturing engineering experience in an aerospace and defense environment. Position Description: The Project / Manufacturing Engineer owns assigned jobs end-to-end and works closely with Production, Quality, Supply Chain, and Program Management to ensure successful execution. Key Responsibilities: • Own manufacturing jobs from kickoff through final shipment, serving as the primary engineering contact throughout the lifecycle, • Develop, review, and release manufacturing travelers, work instructions, routings, and Bills of Materials (BOMs), • Coordinate cross-functionally with Production, Quality, Purchasing and Testing to ensure jobs progress on schedule, • Actively monitor work order status and identify risks related to schedule, material, tooling, or manufacturability, • Provide timely support to the production floor, resolving technical issues and clarifying documentation as needed, • Lead issue resolution related to manufacturing discrepancies, nonconformances, and build challenges, • Support and participate in MRB (Material Review Board) activities and dispositions, • Ensure ERP accuracy for work orders, BOMs, and engineering changes, • Drive jobs to completion by removing obstacles, coordinating resources, and escalating issues when required, • Communicate regularly with management on job status, risks, and corrective actions, • Support continuous improvement initiatives to reduce defects, improve flow, and increase manufacturing efficiency Required Skills & Technical Qualifications: Technical Skills: • Strong ability to read and interpret electrical and mechanical drawings, • Solid understanding of cable assemblies and electro-mechanical manufacturing processes, • Familiarity with aerospace and military standards and regulated manufacturing environments, • Experience creating and maintaining manufacturing documentation (travelers, work instructions, BOMs), • Experience supporting production floor activities and resolving manufacturing issues Project & Systems Skills: • Proven experience managing multiple jobs or projects simultaneously, • Strong organizational and prioritization skills, • Experience working within an ERP system for work orders, BOMs, and revisions, • Experience participating in MRB activities and structured problem solving Software Experience (Preferred): • ERP systems (experience required; specific system training provided), • Microsoft Office (Excel, Word, PowerPoint), • AutoCAD, Visio, or similar tools for technical documentation Education & Experience: • Bachelor’s degree in Engineering or related technical field (Manufacturing, Mechanical, Aerospace, or similar), • Minimum of 5 years of experience in a manufacturing engineering or project engineering role, • Prior experience in aerospace, defense, or other regulated manufacturing environments strongly preferred Professional Characteristics: • Strong ownership mentality and ability to push jobs to completion, • Clear and effective communication skills across engineering, production, and management, • Comfortable working in a fast-paced, high-mix manufacturing environment, • Proactive problem solver with a continuous improvement mindset, • Able to balance technical detail with schedule and execution priorities Additional Requirements: • Ability to lift up to 50 lbs, • Maintain a neat and professional appearance, • Willingness to work flexible hours, including evenings or weekends as required, • Must be able to communicate effectively in English, • Must be eligible to work in the United States DCX-CHOL Enterprises Inc. is an Equal Opportunity Employer; employment with DCX-CHOL Enterprises Inc. is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. ITAR REQUIREMENTS: To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. DCX-CHOL Enterprises Inc. is an Equal Opportunity Employer; employment with DCX-CHOL Enterprises Inc. is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. DCX-CHOL Enterprises Inc. will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS), with information from each new employee’s Form I-9 to confirm work authorization via E-Verify.

Job DescriptionHermeus is a high-speed aircraft manufacturer focused on the rapid design, build, and test of high-Mach and hypersonic aircraft for the national interest. Working directly with the Department of Defense, Hermeus delivers capabilities that will ensure that our nation, and our allies, maintain an asymmetric advantage over any and all potential adversaries.Responsibilities: • Develop and standardize procedures/automation for the checkouts, integration, development testing, and taxi testing of new and flight-proven vehicles, rapidly iterating based on lessons learned, • Design software and automation tools to enable autonomous vehicle operations, and to conduct vehicle system testing in ways that reduce complexity, • Assist with integration and testing of flight hardware, partnering with and providing direction to highly skilled field technicians and specialists daily, • Ensure test and flight readiness by reviewing test results and working with other teams to resolve off-nominal test results, collaborating with engineering staff from other departments and locations on a regular basis, • Identify opportunities to improve existing processes and equipment to eliminate small scale production waste, • Manage work orders and drive non-conformances into actionable items and systematic improvements Minimum Requirements:, • Bachelor’s degree in an engineering discipline, • 3+ years of experience with mechanical, electrical and/or fluid systems Preferred Skills and Experience:, • Expert level first-principles engineering knowledge, • Experience working with a variety of software systems and writing/de-bugging code, • Experience writing test plans and test procedures, • Experience (preferably hands-on) working on projects that involve the integration of electrical, mechanical, and software systems, • Professional experience testing and operating with or around hazardous systems (high voltage, high pressure, combustible fluids, etc.), • Professional experience working with large assembly moves (e.g. crane operations), • Ability to communicate clearly and accurately with a wide range of people, • Ability to multitask and work in a fast-paced, autonomously driven, and demanding start-up atmosphere, • Ability to learn, lead others, and help others learn while maintaining productivity, • Advanced degree in electrical engineering, computer engineering, computer science, mechatronics, mechanical engineering, and/or aerospace engineering Additional Requirements:, • Ability to work long hours and some weekend as needed, to support critical milestones, • Ability to lift up to 25 lbs; standing, climbing, bending, grasping, sitting, pulling, pushing, stooping, stretching, and carrying maybe require to perform the functions of this positions., • Ability to travel on short notice to support test campaigns We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description PM2CM, Inc., (Project Management to Construction Management) is a professional services company dedicated to providing Program and Project Management, Construction Management and Project Controls services during the design and construction phase of projects. Our core expertise is in Project Controls which includes Scheduling, Cost Controls, Document Management and Controls, Budget tracking and monitoring, Estimating, Risk Analysis, Claims avoidance and Mitigation, Change Management and Earned Value Management. Position is in Pomona, California. Hybrid-Remote (Tuesday and Wednesday in the office/field) JOB OPPORTUNITY: WE ARE HIRING WITH 1 OR MORE YEARS OF WORK EXPERIENCE TO WORK ON ELECTRICAL INFRASTRUCTURE PROJECTS WITH ONE OF THE LARGEST UTILITIES IN SOUTHERN CALIFORNIA. THIS IS A HYBRID POSITION WHERE THE SUCCESSFUL CANDIDATE WILL HAVE THE FLEXIBILITY TO WORK FROM HOME THREE DAYS A WEEK AND REQUIRED TO COME INTO THE CLIENT OFFICES LOCATED IN POMONA, TWO DAYS A WEEK. As a project controls estimator, you will play a crucial role in supporting the estimation process for projects ranging from small to large scale. You will work closely with the Project Controls team, project managers, engineers, and other stakeholders to gather necessary information and develop accurate cost estimates. Responsibilities will include: · Assisting with the collection and analysis of project scope and cost data · Supporting the development of project cost estimates based on historical data and industry benchmarks · Collaborating with cross-functional teams to review and validate cost estimates · Preparing and maintaining documentation related to cost estimates · Assisting with risk analysis and contingency planning · Contributing to the continuous improvement of estimation methodologies Requirements Requirements: · Bachelor’s degree in engineering, Construction Management, or a related field · 1-2 years of experience in project controls, estimating, or a similar role within the construction industry · Strong analytical skills with the ability to interpret and analyze project data · Proficiency in relevant software tools, such as Excel, estimating software, and project management software · Excellent communication skills, both written and verbal · Detail-oriented and organized, with the ability to manage multiple tasks and meet deadlines · Knowledge of project management principles and practices · Understanding of construction processes and terminology · Ability to work collaboratively in a team environment · Willingness to adapt to changing priorities and requirements Benefits If you are an F1 student on OPT seeking professional STEM opportunities, we encourage you to apply and join our team. PM2CM is here to support your career growth and development, and we look forward to welcoming individuals with diverse backgrounds and experiences to contribute to our collaborative and dynamic work environment.

Job DescriptionDescriptionAs a Senior Propulsion Development Engineer (Fluids) at Impulse, you will own all aspects of in-house propulsion system design, analysis, implementation and operation while working closely with a fast-paced, agile team that produces high-performance spacecraft from clean sheet designs. Building off our successful Mira spacecraft program, Impulse is developing new propulsion systems for on-orbit applications as well as Lander applications. Impulse is looking for development engineers who can contribute to these key hardware development projects. Responsibilities • Own all aspects of a storable, liquid propellant system development, • Architect and layout fluids systems on a high delta-V, storable propellant propulsion system, • Conduct analysis and testing to ensure that the performance and function of hardware meets intent, • Prepare, plan and execute tests including propellant and pressurization system testing, • Work with wide-ranging teams across engineering, manufacturing and operations to deliver a reliable, high-performance and highly integrated system, • Resolve technical issues with innovative resourceful solutions, • Bachelor's degree in engineering or science, • 5+ years of demonstrated experience in the aerospace propulsion field, • Prior experience working liquid rocket propulsion systems, including hardware and test experience with flow control systems., • Proficiency in basic principles of fluids, thermodynamics, heat transfer, mechanics and materials, • Ability to perform system trades ranging from thermal-fluids analyses to materials selection, • Hands-on experience working with fluid, mechanical, electrical and controls systems, • Advanced degree in Mechanical, Aerospace, or a comparable field., • Experience working in fast-paced, startup environment., • Demonstrated technical project leadership over propulsion development programs, • Prior experience with propulsion system architecture and layout for low mass fraction vehicle designs, • Prior experience with nitrous oxide as a propellant, • Proficiency in CAD software with ability to learn new tools, • Cross disciplinary fluid analysis experience (e.g. hand calc, fluid network modeling)., • Familiarity with aerospace structural analysis standards pertinent to liquid rocket engine development (e.g. NASA-STD-5012, NASA-STD-5020), • Excellent verbal and written communication skills.Additional Requirements:, • Flexible schedule and willing to travel as needed Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.