Trabajos structural welding en Camden, New JerseyCrear alertas

Summary\n \n \nYou will serve as a WELDER LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility.\n \n \nThis position is located in the Structural Shop (Shop 26).\n \n Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A.\n \n Learn more about this agency\n \n Duties\n \n \nHelp\n \n \n\n • You will perform reviews of documents associated with completed work and trade processes.\n, • You will keep shop personnel apprised of new technologies, procedures, and tooling improvements associated, approved, and adopted for welding work.\n, • You will provide process improvements and work with engineering to reduce cost and improve the overall efficiency of the welding and non-destructive test program.\n, • You will inspect completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules.\n, • You will train and mentor less skilled employees, demonstrate proper work methods, and discuss viable alternatives and considerations.\n, • You will serve as an Expert Welder leading a group to ensure work assignments are completed.\n\n \n Requirements\n \n \nHelp\n \n Conditions of employment\n \n \n\n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This is a bargaining unit position.\n, • You will be required to successfully complete a pre-appointment physical examination.\n, • This position requires the ability to lift and carry items weighing 50 pounds.\n, • Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position requires the ability to climb vertical ladders when working aboard ships and submarines, and occasional work from ladders, platforms and staging areas.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n, • This position requires rotating shift work.\n, • Must hold two common welding qualifications in either SMAW, GTAW, GMAW, Flame Spray, Sub Arc, Hull Cuts, Robotic, etc.\n, • Must maintain visual inspection qualifications per VT-271.\n\n \n Qualifications\n \n \nAlthough a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time.\n \n \nYour qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below.\n \n \nThis job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE.\n \n \nApplicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: https://www.opm.gov/policy-data-oversight/classification-qualifications/federal-wage-system-qualifications/#url=List-of-Approved-Job-Elements\n \n Education\n \n \nThis job does not have an education qualification requirement.\n \n Additional information\n \n Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: https://wageandsalary.dcpas.osd.mil/BWN/AFWageSchedules/\n \n SALARY: \n Puget Sound Naval Shipyard: \n \n WA: https://wageandsalary.dcpas.osd.mil/Content/FWS%20Special%20Schedules/MSA143143SeattleEverett_Tacoma,Washington.pdf\n \n CA: https://wageandsalary.dcpas.osd.mil/Content/FWS%20Special%20Schedules/AMA017017SanDiego,California.pdf\n \n Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/044/044R-25Nov2025.pdf\n \n Portsmouth Naval Shipyard:\n \n ME: https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/087/087R-02Jan2025.pdf\n \n CA: https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/017/017R-02Jan2025.pdf\n \n Norfolk Naval Shipyard: \n \n VA:https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/140/140R-09Jul2024.pdf\n \n PA: https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/115/115R-02Jan2025.pdf\n \n \nThis position is covered by the Department of Defense Priority Placement Program.\n \n \nAdditional vacancies may be filled by this announcement.\n \n \nA tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.\n \n \nTemporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations.\n \n \nTemporary actions taken under this announcement may be made permanent without further competition.\n \n \nTemporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date.\n \n \nCertain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees.\n \n \nApplicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement.\n \n \nA relocation incentive may be authorized.\n \n \nA relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee.\n \n \nApplicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement.\n \n \nReferral lists will be issued on an as-needed basis as vacancies occur.\n \n \nAll eligibility and qualifications must be met by the referral cut-off date.\n \n \nFederal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf\n \n \nPPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation.\n \n \nExpand Hide additional information\n \n \nCandidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.\n \n Benefits\n \n \nHelp\n \n \nA career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.\n \n \nReview our benefits\n \n \nEligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Summary\n \n \nYou will serve as a WELDER LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility.\n \n \nThis position is located in the Structural Shop (Shop 26).\n \n Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A.\n \n Learn more about this agency\n \n Duties\n \n \nHelp\n \n \n\n • You will perform reviews of documents associated with completed work and trade processes.\n, • You will keep shop personnel apprised of new technologies, procedures, and tooling improvements associated, approved, and adopted for welding work.\n, • You will provide process improvements and work with engineering to reduce cost and improve the overall efficiency of the welding and non-destructive test program.\n, • You will inspect completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules.\n, • You will train and mentor less skilled employees, demonstrate proper work methods, and discuss viable alternatives and considerations.\n, • You will serve as an Expert Welder leading a group to ensure work assignments are completed.\n\n \n Requirements\n \n \nHelp\n \n Conditions of employment\n \n \n\n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This is a bargaining unit position.\n, • You will be required to successfully complete a pre-appointment physical examination.\n, • This position requires the ability to lift and carry items weighing 50 pounds.\n, • Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position requires the ability to climb vertical ladders when working aboard ships and submarines, and occasional work from ladders, platforms and staging areas.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n, • This position requires rotating shift work.\n, • Must hold two common welding qualifications in either SMAW, GTAW, GMAW, Flame Spray, Sub Arc, Hull Cuts, Robotic, etc.\n, • Must maintain visual inspection qualifications per VT-271.\n\n \n Qualifications\n \n \nAlthough a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time.\n \n \nYour qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below.\n \n \nThis job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE.\n \n \nApplicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: https://www.opm.gov/policy-data-oversight/classification-qualifications/federal-wage-system-qualifications/#url=List-of-Approved-Job-Elements\n \n Education\n \n \nThis job does not have an education qualification requirement.\n \n Additional information\n \n Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: https://wageandsalary.dcpas.osd.mil/BWN/AFWageSchedules/\n \n SALARY: \n Puget Sound Naval Shipyard: \n \n WA: https://wageandsalary.dcpas.osd.mil/Content/FWS%20Special%20Schedules/MSA143143SeattleEverett_Tacoma,Washington.pdf\n \n CA: https://wageandsalary.dcpas.osd.mil/Content/FWS%20Special%20Schedules/AMA017017SanDiego,California.pdf\n \n Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/044/044R-25Nov2025.pdf\n \n Portsmouth Naval Shipyard:\n \n ME: https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/087/087R-02Jan2025.pdf\n \n CA: https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/017/017R-02Jan2025.pdf\n \n Norfolk Naval Shipyard: \n \n VA:https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/140/140R-09Jul2024.pdf\n \n PA: https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/115/115R-02Jan2025.pdf\n \n \nThis position is covered by the Department of Defense Priority Placement Program.\n \n \nAdditional vacancies may be filled by this announcement.\n \n \nA tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.\n \n \nTemporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations.\n \n \nTemporary actions taken under this announcement may be made permanent without further competition.\n \n \nTemporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date.\n \n \nCertain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees.\n \n \nApplicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement.\n \n \nA relocation incentive may be authorized.\n \n \nA relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee.\n \n \nApplicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement.\n \n \nReferral lists will be issued on an as-needed basis as vacancies occur.\n \n \nAll eligibility and qualifications must be met by the referral cut-off date.\n \n \nFederal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf\n \n \nPPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation.\n \n \nExpand Hide additional information\n \n \nCandidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.\n \n Benefits\n \n \nHelp\n \n \nA career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.\n \n \nReview our benefits\n \n \nEligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Summary\n \n \nYou will serve as a WELDER LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility.\n \n \nThis position is located in the Structural Shop (Shop 26).\n \n Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A.\n \n Learn more about this agency\n \n Duties\n \n \nHelp\n \n \n\n • You will perform reviews of documents associated with completed work and trade processes.\n, • You will keep shop personnel apprised of new technologies, procedures, and tooling improvements associated, approved, and adopted for welding work.\n, • You will provide process improvements and work with engineering to reduce cost and improve the overall efficiency of the welding and non-destructive test program.\n, • You will inspect completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules.\n, • You will train and mentor less skilled employees, demonstrate proper work methods, and discuss viable alternatives and considerations.\n, • You will serve as an Expert Welder leading a group to ensure work assignments are completed.\n\n \n Requirements\n \n \nHelp\n \n Conditions of employment\n \n \n\n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This is a bargaining unit position.\n, • You will be required to successfully complete a pre-appointment physical examination.\n, • This position requires the ability to lift and carry items weighing 50 pounds.\n, • Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position requires the ability to climb vertical ladders when working aboard ships and submarines, and occasional work from ladders, platforms and staging areas.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n, • This position requires rotating shift work.\n, • Must hold two common welding qualifications in either SMAW, GTAW, GMAW, Flame Spray, Sub Arc, Hull Cuts, Robotic, etc.\n, • Must maintain visual inspection qualifications per VT-271.\n\n \n Qualifications\n \n \nAlthough a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time.\n \n \nYour qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below.\n \n \nThis job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE.\n \n \nApplicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: https://www.opm.gov/policy-data-oversight/classification-qualifications/federal-wage-system-qualifications/#url=List-of-Approved-Job-Elements\n \n Education\n \n \nThis job does not have an education qualification requirement.\n \n Additional information\n \n Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: https://wageandsalary.dcpas.osd.mil/BWN/AFWageSchedules/\n \n SALARY: \n Puget Sound Naval Shipyard: \n \n WA: https://wageandsalary.dcpas.osd.mil/Content/FWS%20Special%20Schedules/MSA143143SeattleEverett_Tacoma,Washington.pdf\n \n CA: https://wageandsalary.dcpas.osd.mil/Content/FWS%20Special%20Schedules/AMA017017SanDiego,California.pdf\n \n Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/044/044R-25Nov2025.pdf\n \n Portsmouth Naval Shipyard:\n \n ME: https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/087/087R-02Jan2025.pdf\n \n CA: https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/017/017R-02Jan2025.pdf\n \n Norfolk Naval Shipyard: \n \n VA:https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/140/140R-09Jul2024.pdf\n \n PA: https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/115/115R-02Jan2025.pdf\n \n \nThis position is covered by the Department of Defense Priority Placement Program.\n \n \nAdditional vacancies may be filled by this announcement.\n \n \nA tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.\n \n \nTemporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations.\n \n \nTemporary actions taken under this announcement may be made permanent without further competition.\n \n \nTemporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date.\n \n \nCertain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees.\n \n \nApplicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement.\n \n \nA relocation incentive may be authorized.\n \n \nA relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee.\n \n \nApplicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement.\n \n \nReferral lists will be issued on an as-needed basis as vacancies occur.\n \n \nAll eligibility and qualifications must be met by the referral cut-off date.\n \n \nFederal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf\n \n \nPPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation.\n \n \nExpand Hide additional information\n \n \nCandidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.\n \n Benefits\n \n \nHelp\n \n \nA career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.\n \n \nReview our benefits\n \n \nEligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Job Description 360X Staffing is hiring for Structural Welders in Philadelphia, PA. Pay: $26-29/hr + $150 daily per diem for days worked (for those who qualify) Job Description We are seeking experienced 1st Class Structural Welders for a heavy shipyard construction project. Candidates must have extensive experience with Flux Core Arc Welding (FCAW) and ceramic tape backing while producing high-quality structural welds in all welding positions. Successful candidates must demonstrate exceptional welding skills, pass required testing, and work safely in a fast-paced shipbuilding environment. Responsibilities • Perform structural welding using the Flux Core Arc Welding (FCAW) process., • Weld structural steel in the flat, horizontal, vertical, and overhead positions., • Complete full-penetration welds utilizing ceramic tape backing., • Read and interpret blueprints, weld symbols, and approved Welding Procedure Specifications (WPS)., • Produce welds that meet shipyard quality standards and project specifications., • Safely operate, inspect, troubleshoot, and maintain welding machines and related equipment., • Perform work in accordance with all shipyard safety policies and OSHA regulations. Qualifications • Minimum 5 years of structural welding experience, preferably in heavy shipbuilding, ship repair, or heavy industrial fabrication., • Current hands-on experience with Flux Core Arc Welding (FCAW)., • Current experience using ceramic tape backing., • Proven knowledge and proficiency in heavy shipyard structural welding in all welding positions., • Ability to read and interpret approved Welding Procedure Specifications (WPS), blueprints, and weld symbols., • Strong knowledge of welding equipment, proper setup, basic troubleshooting, and routine maintenance. Working Days: Monday - Saturday Hours: 50+/week To Apply download our app 360X JOBS, visit our website www.360xstaffing.com and 'Join our Team.' \nCompany Description 360X Staffing is a national staffing and workforce management company headquartered in Phoenix, Arizona, that specializes in providing vetted skilled tradespeople, craftsmen, and professionals for commercial, industrial, and infrastructure projects. 360X Staffing is a national staffing and workforce management company headquartered in Phoenix, Arizona, that specializes in providing vetted skilled tradespeople, craftsmen, and professionals for commercial, industrial, and infrastructure projects.

Job DescriptionNDI Engineering Company is seeking a Senior Mechanical Engineer to support our team in Thorofare NJ/Philadelphia. The ideal candidate will have extensive experience in delivering complex design projects from concept to operational readiness. This candidate will have expertise in systems integration, reliability engineering, and compliance with industry standards, with a focus on safety, maintainability, and performance optimization. The ideal candidate will be able to collaborate with Navy program offices, contractors, and technical staff to meet mission-critical objectives. Job Responsibilities • Lead design projects from initial concept through detailed engineering, prototyping, and field validation, ensuring alignment with operational requirements and regulatory frameworks., • Mentor junior engineers, driving innovation in HM&E solutions, and delivering projects on time and within scope., • Create technical drawings and developing supporting technical documentation packages, • Review technical data packaged, mechanical test and quality data and the review of design, manufacturing level, and system installation engineering drawings, • Desired skills:, • CAE/D, SolidWorks and Finite Element Analysis, any additional modeling and design process and tools, • Working knowledge in welding and piping, materials selection, and finishing process., • Understanding of acquisition and systems engineering Qualifications: • Bachelor's level degree in Mechanical Engineering., • Seven (7) years of professional experience., • Five (5) years of relevant experience in Mechanical Engineering, designing mechanical systems associated with US Navy HM&E Submarine Communication and Electromagnetic Systems. NDI Engineering Company is a privately-held small business consulting firm. NDI provides engineering and technical services to Government clients chartered with responsibility for the defense of our country. NDI offerings include naval architecture, marine, civil, structural, mechanical, and electrical engineering and design services. NDI has an ISO 9001:20015 Certified Quality System and was a prior recipient of the U.S. Small Business Administration Region II, Prime Contractor of the Year Award. NDI's corporate office is located in Thorofare, NJ with additional offices at the Naval Business Center, Philadelphia, PA, and Virginia Beach, VA. NDI Engineering Company is an Equal Opportunity Employer. This contractor and subcontractor shall abide by the requirements of 41 CFR §§ 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, or national origin. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status Powered by JazzHR otSICb7Y8E

Job DescriptionNDI Engineering Company is seeking a Senior Mechanical Engineer to support our team in Thorofare, NJ. The ideal candidate will have experience in designing Naval Ship Hull, Mechanical and Electrical (HM&E) systems with extensive experience in delivering complex design projects from concept to operational readiness. This candidate will have expertise in systems integration, reliability engineering, and compliance with Navy standards, with a focus on safety, maintainability, and performance optimization and will collaborate with Navy program offices, contractors, and technical staff to meet mission-critical objectives. Job Responsibilities • Lead design projects from initial concept through detailed engineering, prototyping, and field validation, ensuring alignment with operational requirements and regulatory frameworks., • Mentor junior engineers, driving innovation in HM&E solutions, and delivering projects on time and within scope., • Create technical drawings and developing supporting technical documentation packages, • Review technical data packaged, mechanical test and quality data and the review of design, manufacturing level, and system installation engineering drawings, • Desired skills:, • CAE/D, SolidWorks and Finite Element Analysis, any additional modeling and design process and tools, • Working knowledge in welding and piping, materials selection, and finishing process., • Understanding of acquisition and systems engineeringMinimum Requirements, • Must be a U.S. Citizen and be able to obtain and maintain a U.S. Department of Defense Security Clearance., • Must possess a Bachelor of Science in Engineering degree; Professional Engineer or Engineer in Training Certification preferred but not required, • Must have 15 years of professional work experience, • 10 years of Mechanical Engineering experience in an applicable industry aligned to US Navy HM&E systems., • Excellent leadership and communications skills. NDI Engineering Company is a privately-held small business consulting firm. NDI provides engineering and technical services to Government clients chartered with responsibility for the defense of our country. NDI offerings include naval architecture, marine, civil, structural, mechanical, and electrical engineering and design services. NDI has an ISO 9001:20015 Certified Quality System and was a prior recipient of the U.S. Small Business Administration Region II, Prime Contractor of the Year Award. NDI's corporate office is located in Thorofare, NJ with additional offices at the Naval Business Center, Philadelphia, PA, and Virginia Beach, VA. NDI Engineering Company is an Equal Opportunity Employer. This contractor and subcontractor shall abide by the requirements of 41 CFR §§ 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, or national origin. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status Powered by JazzHR Atk9jcdn8p

Job Description Overview: Overnight TIG Welder: We are seeking a skilled and dedicated TIG Welder to join our fabrication and construction team. The ideal candidate will possess extensive experience in welding, particularly with Tungsten Inert Gas (TIG) processes, and demonstrate a strong understanding of metal fabrication standards. This role involves working on diverse projects that require precision welding, interpretation of technical drawings, and adherence to safety protocols. The successful applicant will contribute to high-quality craftsmanship, ensuring all welds meet industry standards and project specifications. Responsibilities: Overnight TIG Welder: • Perform TIG welding on various metal materials, including sheet metal, pipes, and structural components, following detailed blueprints and technical drawings., • Interpret mechanical blueprints and fabrication shop drawings to accurately execute welding tasks., • Use measuring instruments such as calipers, micrometers, and shop math to ensure precise dimensions and fit-up., • Prepare surfaces through plasma cutting, grinding, and cleaning to facilitate optimal weld quality., • Operate power tools and hand tools safely to assemble components prior to welding., • Maintain compliance with American Welding Society (AWS) standards and safety protocols throughout all operations., • Conduct quality inspections using measuring instruments like calipers and micrometers to verify weld integrity., • Collaborate with team members on assembly tasks involving metal fabrication and mechanical assembly., • Utilize various welding techniques including FCAW (Flux-Cored Arc Welding), MIG (Metal Inert Gas), shielded metal arc welding (SMAW), stick welding, and gas metal arc welding as required., • Support fabrication shop activities by interpreting technical drawings for pipe threading, plasma cutting, and sheet metal fabrication., • Maintain a clean work environment and ensure all safety procedures are followed diligently. Skills: Overnight TIG Welder: • Proven experience on construction sites with a solid understanding of site safety protocols., • Proficiency in TIG welding along with other methods such as FCAW, MIG welding, SMAW, and gas metal arc welding., • Strong mechanical knowledge including blueprint reading, interpreting technical drawings, and shop math., • Familiarity with measuring instruments such as calipers, micrometers, and other measuring tools., • Ability to operate power tools, hand tools, plasma cutters, and pipe threading equipment safely., • Experience with sheet metal fabrication, pipe assembly, plasma cutting, and mechanical fabrication processes., • Knowledge of safety standards set by industry organizations such as the American Welding Society (AWS)., • Excellent attention to detail combined with the ability to interpret technical specifications accurately., • Basic math skills necessary for precise measurements and calculations related to fabrication tasks., • Mechanical blueprint interpretation skills essential for assembling complex components accurately., • Strong teamwork orientation with effective communication skills across diverse project environments.

Job DescriptionMust be willing to travel/temporarily relocate to Portland, OR. Why Skilled Trades Professionals Choose AAA USA: • Competitive Pay., • Overtime Opportunities., • Long-Term Assignments., • Multiple U.S. Locations., • Relocation Assistance Available., • Referral Programs., • Medical, Dental & Vision Benefits., • 401(k) with Company Match., • Paid Time Off & Paid Holidays. Position Summary:AAA United States, Inc. has partnered with a company in Portland, Oregon that is the premiere West Coast shipyard for building large Jones Act compliant articulated tug barges, deck barges, dump scows, oil spill recovery vessels, crane barges hopper barges and more. Essential Functions: • Tack and fit steel components together in preparation for final welding., • Set up and operate welding equipment safely and efficiently., • Perform production welding on heavy steel components., • Perform assembly and disassembly of steel components, • Weld and fit in flat, horizontal, vertical, and overhead positions., • Read blueprints and execute precise layout and fitting work., • Inspect completed welds to ensure top-quality workmanship and specification compliance., • Remove slag and finish welds with attention to detail., • Troubleshoot minor welding equipment issues as needed., • Work safely and follow all company safety standards and procedures., • Collaborate with a hardworking team committed to quality and continuous improvement. Requirements: • Ability to weld structural steel and become certified using 1/16” flux core wire in all positions on unlimited thickness plate., • Ability to pass weld tests including:, • Fillet welds on 1" plate (2G, 3G, and 4G)., • Groove welds on 1" plate (2G, 3G, and 4G)., • Strong math and measurement skills, including fractions and tape measure reading., • Ability to operate a hand-cutting torch efficiently and produce quality cuts., • Blueprint reading and steel layout experience., • Ability to follow written and verbal instructions., • AWS D1.1 / D1.5., • Strong safety mindset and commitment to safe work practices., • Ability to work independently and as part of a team., • Desire to learn, improve, and build new skills continuously.

Job Description Geo-Technology Associates, Inc. (GTA) is seeking a CERTIFIED SPECIAL INSPECTOR with 2-5 years of relevant test experience for work in the Greater Philadelphia area. SPECIAL INSPECTOR RESPONSIBILITIES: · Verify construction is being completed in accordance with all plans and specifications · Carry out inspections, sampling and testing · Coordinate with clients, general contractors, and GTA Project Managers · Record and document the construction in daily field reports · Contribute to the generation of technical reports and special inspection summaries · Oversee, train, and mentor junior/less-experienced staff Requirements SPECIAL INSPECTOR REQUIREMENTS · At least one of the following: o ICC Certifications (Soils, Masonry, Fireproofing, Structural Steel Welding, Structural Steel Bolting, Reinforced Concrete, etc.) o ACI Certified Construction Special Inspector (CCS), ACI CCS, ACI Concrete Field-Testing Technician Grade I, ACI/CRSI Certificate for Post-Installed Concrete Anchor Installation Inspector. o Special Inspection of Firestopping · At least one of the following: o P.E., E.I.T, P.G., G.I.T. o NICET Level I, II, III or IV (Geotechnical Engineering Technology Construction) o NICET Level I, II, III, or IV (Soils Certificate in Construction Materials Testing) o AWS or CWI o American Society of Non-Destructive Testing (ASNT) Level II or III · Register as a Special Inspector with Philadelphia License and Inspection (L&I) ECLIPSE program. · Own reliable transportation, valid driver's license and satisfactory driving record · U.S. Citizen or Permanent Resident (Visa sponsorship not available) · Ability to work independently and as part of a team · Willing to travel and work in the Tri-State Area (PA, NJ, DE) and in the City of Philadelphia · Ability to lift up to 75 lbs. unaided and up to 100 lbs. with assistance; frequent bending, hammering and other repetitious movements · Proficient with Microsoft Word, Excel, PowerPoint and Adobe Benefits Why You’ll Love Working With Us: We believe in taking care of our team—professionally, personally, and everything in between. Here’s what you can look forward to as part of our team: • Generous Paid Time Off and Paid Holidays to support your work-life balance, • Annual Bonus Potential – your hard work deserves to be rewarded, • Comprehensive Health Coverage – including Medical, Dental, Vision, plus Health Savings and Flexible Spending Accounts, • Peace of Mind – with Company-paid Life Insurance and both Short- and Long-Term Disability Insurance, • Invest in Your Future – through our 401(k) with Company Match, • Education Assistance Program – helping you continue to grow and learn, • Employee Assistance Program – free access to short-term counseling, financial coaching, legal consultations, life coaching, and more, • Peak Health Wellness Plan – personalized nurse consultations, no-cost lab work, and ongoing wellness support, • Stay Connected & Inspired – with free memberships to professional societies, • Professional Development – Seminars, Conventions, Lunch & Learns, Mentoring, and Software Training to help you reach your goals, • Referral Bonuses – bring great people on board and get rewarded, • Recognition That Matters – we celebrate achievements big and small with our Employee Recognition Program, • Team Spirit & Fun – enjoy company picnics, events, and a welcoming, supportive work environment We ensure nondiscrimination and equal employment opportunity in all programs and activities in accordance with Title VI of the Civil Rights Act of 1964, and all revisions and addendums thereof.

Job Description Job description: We are looking for a Welding Instructor who is responsible for delivering high-quality classroom instruction and hands-on shop training to students enrolled in the Welding Technology Program. The instructor prepares students for entry-level employment in welding and fabrication by teaching core welding processes, blueprint reading, metal fabrication, safety practices, and jobsite professionalism. The ideal candidate is a skilled welding professional with strong technical knowledge, hands-on industry experience, and a passion for teaching adult learners. Essential Duties and Responsibilities • Deliver classroom and hands-on shop instruction in accordance with approved curriculum and learning objectives, • Teach students foundational and advanced welding concepts, including:, • Welding safety and OSHA compliance, • Shop safety and proper PPE usage, • Blueprint reading and welding symbols, • Measurement, layout, and shop mathematics, • Metal preparation and fabrication techniques, • Oxy-fuel cutting and plasma cutting, • Shielded Metal Arc Welding (SMAW / Stick), • Gas Metal Arc Welding (GMAW / MIG), • Flux-Cored Arc Welding (FCAW), • Gas Tungsten Arc Welding (GTAW / TIG), if applicable, • Weld inspection and quality control, • Joint design, weld positioning, and troubleshooting, • Basic pipe and structural welding applications, • Demonstrate proper operation of welding machines, cutting tools, grinders, and fabrication equipment, • Supervise students during lab/shop activities to ensure safe practices at all times, • Monitor and correct unsafe behaviors immediately, • Evaluate student progress through practical demonstrations, exams, projects, and performance assessments, • Maintain accurate attendance, grading, and student performance records, • Provide academic support, coaching, and mentorship to students needing additional assistance, • Reinforce professionalism, attendance, punctuality, and workplace expectations, • Maintain a clean, organized, and safe welding lab and classroom, • Report equipment malfunctions, supply needs, and safety concerns to administration Required Qualifications • Minimum 3-5 years of verifiable industry experience in:, • Welding, • Fabrication, • Structural welding, • Pipe welding, • Manufacturing or industrial welding environments Strong knowledge of: • Multiple welding processes (SMAW, MIG, FCAW; TIG preferred), • Welding safety standards, • Blueprint reading and weld symbols, • Fabrication and metalworking practices, • Weld quality and inspection methods, • Ability to teach both lecture and hands-on technical instruction, • Strong communication and classroom management skills, • Ability to work effectively with adult learners from diverse backgrounds, • High school diploma or GED required, • Basic computer skills for attendance, grading, and communication Preferred Qualifications • Prior teaching, mentoring, apprenticeship training, or workforce development experience, • American Welding Society (AWS) certification preferred (e.g., Certified Welder or CWI), • OSHA 10 or OSHA 30 certification preferred, • Experience in vocational, technical, or postsecondary education preferred Physical Requirements • Ability to stand, walk, bend, kneel, and move throughout classroom and shop for extended periods, • Ability to lift and carry up to 50 pounds, • Ability to safely demonstrate welding and fabrication techniques, • Comfortable working in an industrial shop environment with heat, sparks, noise, fumes, and heavy equipment Benefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Vision insurance \nCompany Description The Philadelphia Technician Training Institute (PTTI) is a leading trade school dedicated to providing students with the knowledge and hands-on experience necessary to succeed in various skilled trades. With over 12 years of experience in career-oriented education, PTTI prepares students for rewarding careers in Welding, Automotive, and Central Processing Sterilization Industries. The Philadelphia Technician Training Institute (PTTI) is a leading trade school dedicated to providing students with the knowledge and hands-on experience necessary to succeed in various skilled trades. With over 12 years of experience in career-oriented education, PTTI prepares students for rewarding careers in Welding, Automotive, and Central Processing Sterilization Industries.

Job DescriptionBenefits: • 401(k) matching, • Competitive salary, • Free uniforms, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development, • Bonus based on performance We are seeking a skilled and detail-oriented Sign Manufacturer Welder to join our team. The ideal candidate will be responsible for welding metal components used in the production of custom signs, ensuring high-quality craftsmanship and structural integrity. The role requires the ability to work with various materials, follow blueprints and design specifications, and maintain a safe and efficient workspace. Key Responsibilities: • Weld and fabricate metal components for custom signs, including frames, support structures, and decorative elements., • Read and interpret technical drawings, blueprints, and design specifications to accurately assemble and weld components., • Operate welding equipment (MIG, TIG, Stick) and tools, ensuring precision and quality in every weld., • Measure, cut, grind, and prepare metal materials for welding and assembly., • Ensure the final product meets company standards for durability, aesthetics, and safety., • Collaborate with designers and production team to achieve desired results within specified timelines., • Maintain and troubleshoot welding equipment, ensuring safe and proper operation., • Follow safety protocols and guidelines, including the proper use of protective equipment and adherence to safety regulations., • Keep a clean and organized work area, ensuring tools and materials are properly stored and maintained.Qualifications:, • Proven experience as a welder, preferably with experience in metal fabrication for signage., • Proficient in various welding techniques, including MIG, TIG, and Stick welding., • Strong understanding of blueprints, technical drawings, and welding symbols., • Ability to work with different metals, such as aluminum, steel, and stainless steel., • Attention to detail and a strong commitment to producing high-quality work., • Excellent problem-solving skills and the ability to troubleshoot and fix welding issues., • Strong communication skills and the ability to work collaboratively with a team., • Physical stamina to perform tasks that may require lifting, bending, and standing for extended periods., • Ability to follow instructions and work independently with minimal supervision.Preferred Qualifications:, • Certification in welding or related field., • Experience working with CNC machines or automated welding systems., • Previous experience in the sign manufacturing industry.Work Environment:, • Full-time, on-site position., • The work environment involves exposure to various welding gases, noise, and temperatures, requiring the use of personal protective equipment (PPE)., • May require overtime during peak production periods.Compensation:, • Competitive hourly wage, commensurate with experience., • Health benefits, retirement plans, and other company perks may be offered.

Job Description About PTS: Trusted, Responsive, and Nationwide Phillips Tank & Structure (PTS) is a growing, team-oriented, nationwide tank construction company with headquarters in Braddock, Pennsylvania, just outside of the City of Pittsburgh. We have over 190 employees and branch offices in Texas, California, Kentucky, and Hawaii. We specialize in designing, engineering, repairing, and constructing above-ground metal storage tanks and related structures, including welded tanks, bolted tanks, and geodesic domes. We have active projects in various industries, such as petroleum, power, chemical, and renewable fuels. At PTS, our commitment to our customers shapes everything we do. We have served companies across an array of industries, handling new tanks, repairs, and modifications. Our collective methodology, industry knowledge, and exhaustive range of abilities permit us to meet one-of-a-kind needs of our customers as they react to industry expectations. We believe in good quality and on-time delivery. We provide an excellent working relationship based on integrity and professionalism. Why Choose PTS? • Positive Work Culture: PTS employees experience a healthy blend of creativity, accountability, motivation, and improvement through team-based interactions with peers and other group members., • Professional Development: PTS is a growing company with many opportunities for advancement. PTS' systems-based approach to training and development helps employees quickly find the path to success in our company., • Intellectual Satisfaction: Being part of a team that executes unique and challenging projects throughout the country and actually builds something is an exciting endeavor. Our Core Principles • Service: The primary expectation for all employees at PTS is to focus on service. We are called to serve our customers as well as our co-workers and suppliers. We endeavor to build a cohesive team of employees who care about the well-being of the group., • Planning and Problem Solving: Planning and problem solving should be utilized to achieve productivity. We will strive every day to be organized and efficient in our approach. We will always look for better ways to achieve results rather than propagating inefficient or inaccurate methods., • Personal Development: Every employee should assist in the development of co-workers just as each employee should pursue their own personal development. Mentor and teammate relationships lay the groundwork for future growth and rewards. We are currently looking to hire a full-time Foreman/Tank Builder Job Duties: • Foreman are responsible for providing site supervision and site-based senior leadership of a PTS construction project. • Acts as point of contact with customer, vendors and subcontractors on site., • Works to maintain Safety, Quality and Productivity., • The Field Foreman is responsible for understanding the contract scope of work and for the identification of field-initiated scope changes (change orders). • Provides leadership regarding Safety on the jobsite. Fosters a Safety Culture within the crew., • Provides leadership regarding Quality on the jobsite. Eliminates “go-backs”, rejected or sloppy work. • Enhances field productivity. Consistently perform projects under budget and on time., • Balances customer satisfaction with profitability of the project. Keeps customers happy yet protects the company regarding scope changes and barrier time. • Provides craft knowledge and experience to the crew. Expertise in several areas of PTS specialty work (welding, structural erection, tank repair, new tank construction, rigging etc.) • Evaluates field employees and identifies those who are candidates for promotion. Provides guidance and training to assist in their development. Communicates the employee evaluation information to Construction Managers and HR. • Assists Construction Managers and HR in recruiting field workers., • Responsible for the care and maintenance of all tooling and equipment, and immediately calling equipment off rent when no longer needed • Utilizes experience and skills to identify opportunities for improvement of company practices and resources. • Represents PTS in a professional, positive light to customers and employees., • Provides a positive contribution to pre-construction planning effort., • Communicates well with the support staff (i.e. Design, Purchasing, PM, Admin), • Knows and understands the estimated manhours and scope on projects prior to job start. Works with PM in tracking progress weekly (Field Labor Reports). • Works with Safety Specialist, Construction Administration and HR to assure that employees assigned to upcoming or ongoing work have received the necessary training and certifications. This may include safety training, DOT, OQ, welder testing, and site-specific requirements. • Completes all necessary paperwork i.e. – daily time sheets, safety and quality audits, customer required paperwork, equipment inspections etc., • Advises Project Management of potential problems, work interferences, and schedule difficulties; assists in resolving such problems, as required. • Provides complete, final, project paperwork to Design Group at end of projects for creating of the Final QC Book. Requirements • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development., • Paid Time Off (accruing immediately), • You’ll be part of a team where YOU matter To Apply: If interested, complete the job application from our website at www.phillipstank.com/careers. We are an Equal Employment Opportunity employer. Powered by JazzHR KHFx6HJPGT

Job DescriptionDescription: We have an immediate opening for an energetic, enthusiastic and highly motivated collision professional to join our growing and dynamic team! Are you a career minded individual in search of a workplace to call home? At Faulkner Collision, you’ll have the opportunity to have a positive impact on our customers and our community while achieving your financial and career goals! Qualifications: · Welding, suspension, framework experience a plus OR willing to learn/train · ASE Certifications; Damage Analysis and Estimating, Mechanical and Electrical Components, Non-Structural Analysis and Damage Repair and State Vehicle Inspector (preferred) · Certifications listed above or equivalent experience and eagerness to improve · Valid driver's license and clean driving record Responsibilities: · Identify and resolve parts required for repair; review repair orders, work order, and Body Shop Manager’s estimate notes; follow warranty guidelines; notify supervisor of any repair add-ons. · Adjust, replace, and repair all series of equipment (e.g., sheet metal repairs, fiberglass/ panel repairs, fabrication and structural welding, installation and alignment body components, electrical and mechanical repairs, etc.). · Teardown and inspect for additional or hidden repairs. What we offer: · Hourly flat rate pay: · Full Time · PTO and holidays · 401(K) retirement plan with company matching · The top insurance program in the industry including medical, dental, prescription and vision · Advancement within the Ciocca Automotive Family · Employee discounts: purchases, repair, service At Faulkner Collision, our team members enjoy a supportive and collaborative work environment. Don’t miss out on this exciting opportunity to grow your career! Apply now! We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Requirements:

Job DescriptionDescription: We have an immediate opening for an energetic, enthusiastic and highly motivated collision technician to join our growing and dynamic team! Are you a career-minded individual in search of a workplace to call home? At Faulkner Collision of Philadelphia, you’ll have the opportunity to have a positive impact on our customers and our community while achieving your financial and career goals! Qualifications: · Welding, suspension, framework experience a plus OR willing to learn/train · ASE Certifications; Damage Analysis and Estimating, Mechanical and Electrical Components, Non-Structural Analysis and Damage Repair and State Vehicle Inspector (preferred) · Certifications listed above or equivalent experience and eagerness to improve · Valid driver's license and clean driving record Responsibilities: · Identify and resolve parts required for repair; review repair orders, work order, and Body Shop Manager’s estimate notes; follow warranty guidelines; notify supervisor of any repair add-ons. · Adjust, replace, and repair all series of equipment (e.g., sheet metal repairs, fiberglass/ panel repairs, fabrication and structural welding, installation and alignment body components, electrical and mechanical repairs, etc.). · Teardown and inspect for additional or hidden repairs. What we offer: · Hourly flat rate pay · Full Time · PTO and holidays · 401(K) retirement plan with company matching · The top insurance program in the industry including medical, dental, prescription and vision · Advancement within the Ciocca Automotive Family · Employee discounts: purchases, repair, service At Faulkner Collision of Philadelphia, our team members enjoy a supportive and collaborative work environment. Don’t miss out on this exciting opportunity to grow your career! Apply now! We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Requirements:

Job Description Vision Point Systems, Inc. is seeking an experienced Structural Engineering Technician with at least five (5) years of experience supporting U.S. Navy ship structures. The successful candidate will support structural condition assessments, nondestructive testing (NDT), and repair planning for Navy ships. This position requires 50% travel to support shipboard assessments, shipyard activities, and client requirements. When not traveling, the technician will work on site in Navy offices in Philadelphia, PA, directly with the Navy client, engineers, and maintenance stakeholders. Primary Responsibilities • Inspect and document the condition of hull plating, decks, bulkheads, stiffeners, frames, foundations, tanks, voids, and other ship structures., • Identify and document corrosion, pitting, metal loss, cracking, deformation, weld discontinuities, and deterioration affecting structural condition., • Perform assigned NDT within the limits of current method-specific qualification and certification, using approved procedures and applicable acceptance criteria., • Collect ultrasonic thickness measurements and prepare thickness maps, inspection sketches, photographs, and traceable records of structural deficiencies., • Read ship structural drawings, weld symbols, scantlings, repair details, and technical specifications; verify installed conditions against drawings., • Assist engineers with structural evaluations, repair scopes, inspection plans, and recommendations for follow-up testing or corrective action., • Prepare clear inspection reports, technical summaries, and client briefings; promptly elevate significant findings to the responsible engineer and Navy client., • Coordinate access, inspection schedules, and work priorities with Navy personnel, ship’s force, shipyards, and maintenance organizations., • Maintain inspection equipment, calibration records, test data, and document revision control; follow shipboard and shipyard safety requirements. Requirements • Associate degree + 2 yrs experience in Structural Engineering Technology, Mechanical Engineering Technology, Marine Engineering Technology, or a related technical field. -OR- • Minimum of five (5) years of directly relevant experience evaluating, inspecting, maintaining, or repairing U.S. Navy ship structures., • Working knowledge of steel and aluminum ship construction, structural members, welding, corrosion mechanisms, and common structural damage., • Experience interpreting Navy ship drawings and specifications and producing accurate inspection records and technical reports., • Documented NDT training applicable to ship structures, including the core methods listed below. Must obtain and maintain employer certification for assigned methods before independently performing or accepting examinations., • Ability to communicate professionally and work directly with the Navy client while coordinating technical issues with the company’s engineering team., • Ability to travel 50% of the time and work on site in the Philadelphia Navy offices when not traveling., • Ability to access shipboard spaces, climb ladders, and work in tanks, voids, and other confined spaces when authorized, with required training and protective equipment., • Must be able to obtain and maintain a DoD Secret Security Clearance. Requires US Citizenship. Required Training/Working Knowledge Core training for this position includes the following methods and Navy-specific applications. Required qualification scope will be matched to assigned work. • Visual Testing (VT): Structural and weld examination, weld gauges, surface condition assessment, discontinuity recognition, and inspection documentation., • Ultrasonic Testing (UT) for Thickness Measurement: Equipment setup, calibration, thickness gauging, corrosion mapping, and evaluation of measurement limitations on pitted or coated ship structures. Desired Training/Skills • Magnetic Particle Testing (MT): Surface and near-surface crack detection in ferromagnetic steel structures and welds, including technique selection and indication interpretation., • Liquid Penetrant Testing (PT): Surface-breaking discontinuity detection in nonporous materials, including aluminum and nonmagnetic structural components and welds., • Navy Procedure and Acceptance Criteria Training: Applicable contract-invoked NAVSEA requirements, including T9074-AS-GIB-010/271, approved inspection procedures, reporting, and the acceptance standards specified for the work., • Training in, or demonstrated working knowledge of, Naval Ships’ Technical Manual (NSTM) Chapter 100, Hull Structures. Experience applying NSTM Chapter 100 requirements and guidance to shipboard structural inspections, condition assessments, identification and documentation of structural deterioration, and development of recommendations for additional evaluation or repair is highly desired., • Training in, or demonstrated working knowledge of, the structural inspection and assessment requirements contained in the Corrosion Control Assessment and Maintenance (CCAM) Manual. Experience applying CCAM requirements to shipboard structural assessments, including identification, characterization, and documentation of corrosion, pitting, section loss, and other structural deficiencies, is highly desired., • Current or previous employer-issued Level II certifications in VT, UT, MT, and/or PT, supported by training and experience records., • Ultrasonic angle-beam weld examination training; phased array ultrasonic testing (PAUT) training and qualification for applicable structural weld examinations., • Eddy Current Testing (ET) training for applicable surface-crack inspections, especially aluminum structures; radiographic interpretation training where review of weld radiographs is assigned., • Experience assessing Navy ship tanks, voids, hull structures, and weld repairs during maintenance availabilities or dry-docking., • Experience with CAD software such as AutoCAD or SolidWorks and with digital inspection reporting, thickness mapping, and maintenance tracking systems., • Familiarity with applicable NAVSEA welding and inspection requirements and Navy maintenance documentation; AWS Certified Welding Inspector (CWI) credential is a plus., • Ability to recognize when additional testing or engineering review is needed and to support repair verification under approved procedures. Qualification and Safety Training Training completion alone does not authorize independent NDT work. Personnel must satisfy applicable documented experience, examinations, vision testing, and employer certification requirements under the employer’s written practice and contract-invoked NAVSEA requirements. Level II qualification is required for assigned methods involving independent interpretation and evaluation. Prior certifications are subject to employer review and applicable recertification requirements. Before field assignments, complete applicable shipboard and shipyard safety training, including confined-space entrant or attendant training as assigned, fall protection, hazard communication, and respiratory protection when required. Follow site-specific access and entry authorization procedures. Benefits Full-time employees with Vision Point Systems qualify for a generous benefits package including: • Medical, Dental, and Vision Insurance, • Life Insurance (1× annual salary), • Short- and Long-Term Disability, • 401(k) with company matching, • Paid Training and Professional Development, • Flexible work hours (when project and client schedules permit) Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws.

Job Description Department: Body Shop / Collision Center Reports To: Body Shop Manager Employment Type: Full-Time Position Summary The Body Technician (Collision Repair Technician) diagnoses and repairs vehicles damaged in collisions, restoring structural integrity, body panels, and finish to pre-accident condition. The Technician performs metal repair, panel replacement, structural straightening, and refinish preparation in accordance with OEM specifications and shop quality standards. Key Responsibilities • Analyze damage, review repair orders and estimates, and plan the repair procedure., • Repair or replace damaged body panels, frames, and structural components using welding, sectioning, and bonding techniques., • Perform structural and unibody straightening using frame machines and measuring systems to restore factory dimensions., • Remove dents, dings, and imperfections through metal finishing, filling, and sanding., • Weld, cut, and fabricate panels as required, following OEM and I-CAR procedures., • Prepare repaired surfaces for refinishing, including grinding, priming, and block sanding., • Ensure repaired vehicles meet safety, structural, and quality standards before refinish or delivery., • Identify supplemental damage and communicate additional repair needs to the estimator., • Maintain tools, equipment, and a clean, safe work environment; follow all safety and environmental regulations. Qualifications • High school diploma or equivalent; technical or vocational training in collision repair preferred., • 2+ years of hands-on collision/body repair experience., • I-CAR and/or ASE certification preferred (or willingness to obtain)., • Proficiency with frame machines, measuring systems, welders, and body shop tools and equipment., • Knowledge of OEM repair procedures, structural repair, and modern vehicle materials (steel, aluminum, composites)., • Ability to read and interpret repair orders, estimates, and technical specifications., • Valid driver's license with an acceptable driving record., • Ability to lift up to 50 lbs., stand for extended periods, and perform physically demanding work., • Detail-oriented, quality-focused, and able to meet production deadlines.

Position: Structural Inspector. AWS Certified Welding Inspector (CWI) preferred but not required.

Either S1 Structural Steel and Bolting Special Inspector and and S2 Structural Welding Special Inspector certifications required. Fenagh Engineering and Testing is seeking a CWI/S1/S2 Inspector to perform inspections for the shop/field.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo