Tag jobs in Rochester, New YorkCreate job alerts

We are looking for an Electrical and Instrumentation Mechanic to Support our Advanced Material & Chemicals division in Rochester, NY. As an Electrical and Instrumentation Mechanic you will be responsible for the following job functions: • Electrician & Instrumentation skilled trade service to provide multi-discipline capability to repair, maintain, install and make improvements on film manufacturing equipment, complex processing equipment, chemical processing equipment, building general systems (includes instrumentation, pneumatics, hydraulics, controls (PLC’s & distributed control systems (DCS), and a wide range of electrical components), • Ability to calibrate process control instruments tight tolerances using sophisticated calibration equipment., • Ability to achieve a high level of expertise to effectively troubleshoot and repair equipment, including root cause analysis., • Some experience or expertise in mechanical, piping, HVAC equipment and controls., • Includes maintenance of motors, breakers, starters, variable speed drives, process controls devices, heat tracing, lighting, etc., • Calibrate, align and make adjustments with test equipment and measurement equipment., • Installation of conduit, wiring, switches, relays, lighting, circuit breakers using power tools and hand tools, • Install upgrades to enhance or replace outdated control systems., • Execute preventive and predictive maintenance programs., • Data entry and report writing including ISO documentation., • Working knowledge of Microsoft Office and maintenance software tools., • Ability to change based on priorities Requirements: • Dependable, maintain good attendance, • Maintain a clean work area and operate in a safe manner at all times., • Detail orientated Team Player, • Strong electrical and/or instrumentation training and demonstrated skills/experience, • Proficient in Math functions, • Must demonstrate effective analytical troubleshooting skills, • Able to read electrical, instrument and machine drawings, • Able to read/modify PLC programs to troubleshoot equipment problems, • Understanding of new electrical codes for hazardous environments (flammable liquids), • Ability to work effectively with minimal supervision, • Excellent safety record – places safety and environment as top priority in all work, • Knowledge of Lock Out / Tag Out, • Effective communication skills – daily communications with leaders, maintenance planner, technical staff, engineering and operations as needed., • Team player – willing to be flexible, often work in other areas and with other trades as needed., • Significant walking or other means of mobility., • Ability to work in a standing position for extended periods of time (up to 8 hours)., • Ability to reach, bend, stoop, push and/or pull, and frequently lift up to 35 pounds and occasionally lift/move 40 pounds., • Ability to work off of ladders or scaffolding, in some awkward positions, • Indoor and outdoor work assignments, • The noise level in the work environment is usually moderate to loud., • Wear protective clothing and/or Personal Protective Equipment required by the work environment or governmental regulations. Qualifications: • HS diploma, and a 2-year degree or some level of instrumentation, electrical of demonstrated trade experience., • Varying schedule to include evenings, holidays, weekends and extended hours as business needs dictate.

Salary Range:$19.47 To $21.88 Hourly About LiDestri Foods LiDestri Foods has grown from our roots as a pasta sauce and salsa manufacturer to become an R&D engine, formulating and producing innovative food products for our national and retailer brand partners. A family-run company based in Rochester, NY, LiDestri employs over 1,000 people across three U.S. locations. We have decades-long partnerships with some of the most respected consumer packaged goods (CPG) companies and the most highly inventive retailer brands. Excellent Pay and Benefits: • Great career-pathing, • Professional development, including unlimited online training courses, • Health insurance with premium contributions, • Dental, vision, HSA, • 100% company paid life insurance and long-term disability, • 401k – with employer match, • Paid time off to include- vacation, sick pay, wellness time off, and 10 holidays, • Company bonuses, • And many more…. POSITION SUMMARY: Safely operate machinery with maximum efficiency, while maintaining product quality and following regulatory and company guidelines for sanitation and safety DUTIES & RESPONSIBILITIES: • Operate machinery, to include machine set-up, operation, change overs, and troubleshooting, to detect product (raw or finished) defects or machine malfunctions, adjusting machines as necessary;, • Maintain GMP (good housekeeping) standards at and around machinery;, • Perform SOPs for machinery in assigned area;, • Cross training or training on equipment as defined by manager;, • Maintain accurate document documentation;, • Maintain and issue raw materials into assigned work orders;, • Work in a safe manner, consistent with company safety rules and regulations;, • Maintain good attendance record per company policy;, • Report food safety & quality problems to personnel with authority to initiate action. REQUIRED EDUCATION, SKILLS & EXPERIENCE: • High School Diploma or GED preferred;, • Prior machine operation preferred;, • Ability to wear personal protective equipment (bump cap, hair net, ear plugs, beard net (if applicable), Kevlar gloves, safety glasses and leather, skid resistant work shoes/boots;, • Ability to apply basic computer and communication skills, math functions and reasoning;, • Ability to use various hand tools (knife, water house, band cutters, can opener, scales, Telnet scanners, various small hand tools as required for position/product testing);, • Previous experience operating a forklift (for applicable work areas);, • Lock out/tag out certified;, • Possess a continuous improvement and team orientated mind set. WORKING CONDITIONS: Ability to work in a manufacturing environment with exposure to: • Long periods of standing/moving, working around moving mechanical parts/conveyors, • Loud environment, hot/cold, wet/dry conditions, • Lifting/carrying <50 pounds, • Frequent reaching/pulling/climbing stairs/stooping/kneeling/bending

We are looking for an Automated Equipment Mechanic (AEM) to support the Advanced Materials and Chemicals Division in Rochester, NY. As an Automated Equipment Mechanic, you will have the following responsibilities: • AEM skilled trade to provide multi-discipline capability to repair, maintain, install, and make improvements to chemical processing equipment and machinery (includes pneumatics, hydraulics, controls (PLC’s), and electrical components), • Ability to fabricate to exact tolerances using lathes, drill presses, grinders, and other shop equipment, • Some experience or expertise in piping, HVAC equipment and controls, • Ability to achieve a high level of expertise of chemical process equipment for effective troubleshooting and equipment repair, • Execute preventive maintenance program, • Calibrate, alignment and make adjustments with test equipment and production equipment, • Working knowledge of Microsoft Office and maintenance software tools Qualifications include: • HS diploma, • Formal instrumentation, electrical, mechanical, and/or AEM training and demonstrated experience, • Mechanical equipment repair training and/or demonstrated experience: pumps, mechanical seals, agitators, gear boxes, fans (bearings, sheaves), alignment, • Demonstrate effective analytical troubleshooting skills, • Able to read electrical, instrument and machine drawings, • Able to read PLC programs to troubleshoot equipment problems, • Ability to work effectively with minimal supervision, • Excellent safety record – places safety and environment as top priority in all work, • Knowledge of Lock Out / Tag Out, • Understanding of electrical codes for hazardous environments (flammable liquids), • Good communication skills – daily communications with maintenance planner, technical staff and operations as needed, • Good team player – willing be flexible, work in other areas and with other trades as needed Minimum Education Level and Experience: 2-year schooling and/or 5 plus years of demonstrated experience. Work Schedule: • Work schedule will be days initially and during shutdowns., • Rotating Shift: 5-week rotations 4 times per year. Two, 12-hour days followed by two 12-hour nights, then 4 days off. Includes additional shift allowance pay.

Salary Range:$27.50 To $32.13 Hourly About LiDestri Foods LiDestri Foods has grown from our roots as a pasta sauce and salsa manufacturer to become an R&D engine, formulating and producing innovative food products for our national and retailer brand partners. A family-run company based in Rochester, NY, LiDestri employs over 1,000 people across three U.S. locations. We have decades-long partnerships with some of the most respected consumer packaged goods (CPG) companies and the most highly inventive retailer brands. Excellent Pay and Benefits: • Great career-pathing, • Professional development, including unlimited online training courses, • Health insurance with premium contributions, • Dental, vision, HSA, • 100% company paid life insurance and long-term disability, • 401k – with employer match, • Paid time off to include- vacation, sick pay, wellness time off, and 10 holidays, • Company bonuses, • And many more…. POSITION SUMMARY: • The primary role of the Mechanic/Electrician I is to work as a key maintenance team contributor to support company objectives with respect to maintaining equipment to support production requirements using strong mechanical and electrical aptitude., • The role requires a strong mechanical aptitude, which can work with internal and external customers, and can work as part of the maintenance team but is also comfortable working independently. Along with being actively involved in the support of Safety. Quality and Good Manufacturing Practices and Preventive Maintenance programs. DUTIES & RESPONSIBILITIES: • Setup, repair, install, maintain machinery equipment including; mechanical, electrical, pneumatic and hydraulic systems, special projects, measuring and calibrating equipment, performing preventive maintenance duties;, • Performs all production equipment setups as required to meet operational needs;, • Supports and completes Preventive and Planned maintenance of mechanical and utilities equipment including but not limited to; cleaning, inspecting, setup, diagnosing, replacement, testing and continuous improvements;, • Assists in the diagnoses of electrical and mechanical malfunctions in machinery and equipment. Inspect visually and listen to machines and equipment to locate causes of malfunction;, • Identifies and reports the need for repairs/major repairs to Maintenance Management;, • Crossover with previous shifts’ maintenance and production employees to review the schedule and current runs, identifying what needs repair and plan product changeovers;, • Effectively communicate with other departments in a professional manner at all times to communicate on equipment and repair status;, • Works within the maintenance team to accurately communicate/document events so that others have the most effective information to solve problems;, • Assists with the installation of new equipment and enhancing equipment through continuous improvements and upgrades;, • Some basic fabrication skills and use of tools associated with cutting, welding, grinding, soldering;, • Enhances knowledge and skills of mechanical and electrical systems with on the job training;, • Work closely with Engineering, Maintenance Managers and Master Mechanics on projects, continuous improvement and annual plant shut-down maintenance;, • Completes all tasks while strictly adhering to all required industry guidelines but not limited to; Plant Safety, Food Safety, SQF and all internal/external audits;, • Report food safety & quality problems to personnel with authority to initiate action. REQUIRED EDUCATION, SKILLS & EXPERIENCE: • High School Diploma or GED required;, • Basic computer literacy as evidenced by the ability to go online and conduct basic searches on the Internet, check email, create and send with attachments and use basic email features;, • Ability to read, write and interpret documents in English such as safety rules, procedure manuals, operating and maintenance instructions;, • Ability to add, subtract, multiply and divide all units of measure, using whole numbers, common fractions and decimals;, • Ability to solve practical problems and deal with a variety of variables in situations where only limited standardization exists;, • Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form;, • Experience working with manufacturing equipment including 3 phase motors, control wiring, 24VDC, 120VAC, 208/220VAC, 480VAC;, • Experience with Controls for Conveyor Systems, Pneumatics, Hydraulics, Pumps and Valves;, • Knowledge of and ability to comprehend and troubleshoot production machinery (i.e. Fillers, Rinsers, Cappers, Case Packers, Case Formers, Coolers and Pasteurizers);, • Familiarity with Lock-Out Tag-Out Authorized, Hot Work, Confined Space and HECP Training preferred;, • Ability to read and interpret electrical schematics;, • Ability to use a variety of measuring tools and test equipment;, • Ability to work independently, with limited supervision;, • Requires mechanical aptitude;, • Knowledge of Drill Press, Chop Saw, Port-a-Band, Sawzall and other maintenance tools preferred;, • Knowledge or experience with Multi-Meters, Amp Probes, Meger Ohm Meter, Panelview;, • LiDestri experience 2+ years and familiarly with 85% of plant machinery;, • Manlift, Powertools, Hand tools, Panelview Controls, Production Machines, X-Ray Equipment, all types of Photo Eyes, Light Curtains, and Conveyors;, • Kitchen equipment and Pumps, Milling Machine, Lathes and Drill Press;, • Lock-Out Tag-Out Equipment, Gear and HECPS;, • Computer and Printer;, • Ability to climb ladders and use carts;, • Ammeters, ohmmeters, voltmeters, oscilloscopes and motor megger;, • Digital Multimeter and clamp-on AC current reader., • RTO calibrator, RTO Milliamp and Calibrator/simulator. WORKING CONDITIONS: Ability to work in a manufacturing environment with exposure to: • Long periods of standing/moving, working around moving mechanical parts/conveyors, • Loud environment, hot/cold, wet/dry conditions, • Lifting/carrying <50 pounds, • Frequent reaching/pulling/climbing stairs/stooping/kneeling/bending

About LiDestri Foods LiDestri Foods has grown from our roots as a pasta sauce and salsa manufacturer to become an R&D engine, formulating and producing innovative food products for our national and retailer brand partners. A family-run company based in Rochester, NY, LiDestri employs over 1,000 people across three U.S. locations. We have decades-long partnerships with some of the most respected consumer packaged goods (CPG) companies and the most highly inventive retailer brands. Excellent Pay and Benefits: • Great career-pathing, • Professional development, including unlimited online training courses, • Health insurance with premium contributions, • Dental, vision, HSA, • 100% company paid life insurance and long-term disability, • 401k - with employer match, • Paid time off to include- vacation, sick pay, wellness time off, and 10 holidays, • Company bonuses, • The primary role of the Mechanic/Electrician I is to work as a key maintenance team contributor to support company objectives with respect to maintaining equipment to support production requirements using strong mechanical and electrical aptitude., • Setup, repair, install, maintain machinery equipment including; mechanical, electrical, pneumatic and hydraulic systems, special projects, measuring and calibrating equipment, performing preventive maintenance duties;, • Performs all production equipment setups as required to meet operational needs;, • Supports and completes Preventive and Planned maintenance of mechanical and utilities equipment including but not limited to; cleaning, inspecting, setup, diagnosing, replacement, testing and continuous improvements;, • Assists in the diagnoses of electrical and mechanical malfunctions in machinery and equipment. Inspect visually and listen to machines and equipment to locate causes of malfunction;, • Identifies and reports the need for repairs/major repairs to Maintenance Management;, • Crossover with previous shifts' maintenance and production employees to review the schedule and current runs, identifying what needs repair and plan product changeovers;, • Effectively communicate with other departments in a professional manner at all times to communicate on equipment and repair status;, • Works within the maintenance team to accurately communicate/document events so that others have the most effective information to solve problems;, • Assists with the installation of new equipment and enhancing equipment through continuous improvements and upgrades;, • Some basic fabrication skills and use of tools associated with cutting, welding, grinding, soldering;, • Enhances knowledge and skills of mechanical and electrical systems with on the job training;, • Work closely with Engineering, Maintenance Managers and Master Mechanics on projects, continuous improvement and annual plant shut-down maintenance;, • Completes all tasks while strictly adhering to all required industry guidelines but not limited to; Plant Safety, Food Safety, SQF and all internal/external audits;, • High School Diploma or GED required;, • Basic computer literacy as evidenced by the ability to go online and conduct basic searches on the Internet, check email, create and send with attachments and use basic email features;, • Ability to read, write and interpret documents in English such as safety rules, procedure manuals, operating and maintenance instructions;, • Ability to add, subtract, multiply and divide all units of measure, using whole numbers, common fractions and decimals;, • Ability to solve practical problems and deal with a variety of variables in situations where only limited standardization exists;, • Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form;, • Experience working with manufacturing equipment including 3 phase motors, control wiring, 24VDC, 120VAC, 208/220VAC, 480VAC;, • Experience with Controls for Conveyor Systems, Pneumatics, Hydraulics, Pumps and Valves;, • Knowledge of and ability to comprehend and troubleshoot production machinery (i.e. Fillers, Rinsers, Cappers, Case Packers, Case Formers, Coolers and Pasteurizers);, • Familiarity with Lock-Out Tag-Out Authorized, Hot Work, Confined Space and HECP Training preferred;, • Ability to read and interpret electrical schematics;, • Ability to use a variety of measuring tools and test equipment;, • Ability to work independently, with limited supervision;, • Requires mechanical aptitude;, • Knowledge of Drill Press, Chop Saw, Port-a-Band, Sawzall and other maintenance tools preferred;, • Knowledge or experience with Multi-Meters, Amp Probes, Meger Ohm Meter, Panelview;, • LiDestri experience 2+ years and familiarly with 85% of plant machinery;, • Manlift, Powertools, Hand tools, Panelview Controls, Production Machines, X-Ray Equipment, all types of Photo Eyes, Light Curtains, and Conveyors;, • Kitchen equipment and Pumps, Milling Machine, Lathes and Drill Press;, • Lock-Out Tag-Out Equipment, Gear and HECPS;, • Computer and Printer;, • Ability to climb ladders and use carts;, • Ammeters, ohmmeters, voltmeters, oscilloscopes and motor megger;, • Digital Multimeter and clamp-on AC current reader. Ability to work in a manufacturing environment with exposure to: • Long periods of standing/moving, working around moving mechanical parts/conveyors, • Loud environment, hot/cold, wet/dry conditions, • Lifting/carrying

About LiDestri Foods LiDestri Foods has grown from our roots as a pasta sauce and salsa manufacturer to become an R&D engine, formulating and producing innovative food products for our national and retailer brand partners. A family-run company based in Rochester, NY, LiDestri employs over 1,000 people across three U.S. locations. We have decades-long partnerships with some of the most respected consumer packaged goods (CPG) companies and the most highly inventive retailer brands. Excellent Pay and Benefits: • Great career-pathing, • Professional development, including unlimited online training courses, • Health insurance with premium contributions, • Dental, vision, HSA, • 100% company paid life insurance and long-term disability, • 401k - with employer match, • Paid time off to include- vacation, sick pay, wellness time off, and 10 holidays, • Company bonuses, • And many more.... POSITION SUMMARY: Safely operate machinery with maximum efficiency, while maintaining product quality and following regulatory and company guidelines for sanitation and safety DUTIES & RESPONSIBILITIES: • Operate machinery, to include machine set-up, operation, change overs, and troubleshooting, to detect product (raw or finished) defects or machine malfunctions, adjusting machines as necessary;, • Maintain GMP (good housekeeping) standards at and around machinery;, • Perform SOPs for machinery in assigned area;, • Cross training or training on equipment as defined by manager;, • Maintain accurate document documentation;, • Maintain and issue raw materials into assigned work orders;, • Work in a safe manner, consistent with company safety rules and regulations;, • Maintain good attendance record per company policy;, • High School Diploma or GED preferred;, • Prior machine operation preferred;, • Ability to wear personal protective equipment (bump cap, hair net, ear plugs, beard net (if applicable), Kevlar gloves, safety glasses and leather, skid resistant work shoes/boots;, • Ability to apply basic computer and communication skills, math functions and reasoning;, • Ability to use various hand tools (knife, water house, band cutters, can opener, scales, Telnet scanners, various small hand tools as required for position/product testing);, • Previous experience operating a forklift (for applicable work areas);, • Lock out/tag out certified; Ability to work in a manufacturing environment with exposure to: • Long periods of standing/moving, working around moving mechanical parts/conveyors, • Loud environment, hot/cold, wet/dry conditions, • Lifting/carrying, • Frequent reaching/pulling/climbing stairs/stooping/kneeling/bending DISCLAIMER: The duties listed above are intended only as illustrations of the various types of work that may be performed and is not an inclusive summary of job duties and responsibilities. The omission of specific statements of duties or responsibilities does not exclude them from the position. This job description does not constitute an employment agreement between the employer and the employee and is subject to change by the Company as the needs of the Company and requirements of the job change.

About LiDestri Foods LiDestri Foods has grown from our roots as a pasta sauce and salsa manufacturer to become an R&D engine, formulating and producing innovative food products for our national and retailer brand partners. A family-run company based in Rochester, NY, LiDestri employs over 1,000 people across three U.S. locations. We have decades-long partnerships with some of the most respected consumer packaged goods (CPG) companies and the most highly inventive retailer brands. Excellent Pay and Benefits: • Great career-pathing, • Professional development, including unlimited online training courses, • Health insurance with premium contributions, • Dental, vision, HSA, • 100% company paid life insurance and long-term disability, • 401k - with employer match, • Paid time off to include- vacation, sick pay, wellness time off, and 10 holidays, • Company bonuses, • Operate machinery, to include machine set-up, operation, change overs, and troubleshooting, to detect product (raw or finished) defects or machine malfunctions, adjusting machines as necessary;, • Maintain GMP (good housekeeping) standards at and around machinery;, • Perform SOPs for machinery in assigned area;, • Cross training or training on equipment as defined by manager;, • Maintain accurate document documentation;, • Maintain and issue raw materials into assigned work orders;, • Work in a safe manner, consistent with company safety rules and regulations;, • Maintain good attendance record per company policy;, • High School Diploma or GED preferred;, • Prior machine operation preferred;, • Ability to wear personal protective equipment (bump cap, hair net, ear plugs, beard net (if applicable), Kevlar gloves, safety glasses and leather, skid resistant work shoes/boots;, • Ability to apply basic computer and communication skills, math functions and reasoning;, • Ability to use various hand tools (knife, water house, band cutters, can opener, scales, Telnet scanners, various small hand tools as required for position/product testing);, • Previous experience operating a forklift (for applicable work areas);, • Lock out/tag out certified; Ability to work in a manufacturing environment with exposure to: • Long periods of standing/moving, working around moving mechanical parts/conveyors, • Loud environment, hot/cold, wet/dry conditions, • Lifting/carrying, • Frequent reaching/pulling/climbing stairs/stooping/kneeling/bending DISCLAIMER: The duties listed above are intended only as illustrations of the various types of work that may be performed and is not an inclusive summary of job duties and responsibilities. The omission of specific statements of duties or responsibilities does not exclude them from the position. This job description does not constitute an employment agreement between the employer and the employee and is subject to change by the Company as the needs of the Company and requirements of the job change.

• Job Identification 116408, • Job Category Operations, • Posting Date 02/26/2026, 04:39 PM, • Locations 181 McKee Rd, Rochester, NY, 14611, US (On-site), • Apply Before 05/22/2026, 04:00 AM, • Job Schedule Full time, • Remote Work Schedule Availability? None, • LinkedIn Recruiter Tag #LI-CC2 Basic Functions: Work in a fast-paced manufacturing facility to assist install, maintain, and repair machinery, equipment, physical structures, and pipe and electrical systems in commercial or industrial establishments by performing the following duties. Responsibilities: • Perform routine preventative maintenance to ensure that machines continue to run smoothly, building systems operate efficiently, and the physical condition of the building does not deteriorate:, • Visually inspect and test machinery and equipment, • Listen for unusual sounds from machines or equipment to detect malfunction and discuss machine operation variations with supervisors or other maintenance technicians to diagnose the problem or repair the machine, • Inspect drives, motors, and belts, check fluid levels, replace filters, and perform other maintenance actions, following checklists, • Clean and lubricate shafts, bearings, gears, and other parts of machinery, • Troubleshoot and repair various aspects of production machinery, including saws, hydraulic presses and associated forging equipment:, • Repair and replace mechanical components and assemblies, including install of forging dies and fixtures, bearing assemblies, chains, belts and sliding component wear plates, • Troubleshoot, diagnose and repair electrical issues, from control power (transforms, power supplies, contactors, relays, motor starters and overloads) to 480V distribution and motors, • Troubleshoot, diagnose and repair hydraulic issues including loss of system pressures, cylinder actuation, pump or valve leaks or malfunctions; replace hydraulics pumps, motors, cylinders valves and other associated components, • Plan and lay out repair work using diagrams, drawings, blueprints, maintenance manuals, and schematic diagrams, • Align and balance new equipment after installations, • Use tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches, to precision measuring instruments and electrical and electronic testing devices, • Operate cutting torches or welding equipment to cut or join metal parts, • Operate overhead cranes and hoists, forklifts, scissor and boom lifts, • Maintain a safe and organized workstation and follow all Company policies, safety, and procedures, • Record maintenance and repair work performed , Basic Qualifications: • High school diploma or GED is required, • 3-5 years of experience, • Ability to calculate figures and amounts and apply concepts of basic algebra and geometry, • Must be able to carry out instructions furnished in written, oral, or diagram form, • Ability to deal with problems involving several concrete variables in standardized situations., • Must be certified to operate a forklift and man lift to all approved OSHA and Howmet standards., • Salary Range: $24-$25 per hour Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position. , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email , The Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

• Job Identification 116436, • Job Category Engineering, • Posting Date 03/03/2026, 07:04 PM, • Locations 181 McKee Rd, Rochester, NY, 14611, US (On-site), • Apply Before 05/29/2026, 04:00 AM, • Job Schedule Full time, • LinkedIn Recruiter Tag #LI-CC2 This position is located at our aerospace forging plant in Rochester, NY. This position is eligible for $1000. sign-on bonus. Job Duties and Responsibilities: * Using a working knowledge of primarily Ferrous, Titanium and Nickel base alloy metallurgy and processing, and the associated impact on microstructure, mechanical and physical properties, work with the Sales Department on Contract Review. * Understand and work to Quality requirements of our major Aerospace customers including Product Approvals and non-conformance controls. * Work with Process Engineers and Operations groups to develop hot working, cold working, and heat-treating processes to obtain desired characteristics of customers specifications. And issue reports accordingly. * Consult with Engineers and the Operations staff to develop methods of manufacturing alloys at minimum costs, and to implement robust shop floor instructions. * Support Continuous Improvement and Cost Reduction activities as directed, including the use of Quality and Finite Element Analysis tools as appropriate. * Support Quality functions including documentation release of incoming raw material and forging Certificates of Conformity. * Study manufacturing problems to determine most efficient methods of processing metals commercially. Issue reports accordingly. * Work with Heat Treat Department to oversee furnace surveys, Heat Treat Operator qualification training and exams, and Brinell Hardness qualification exams. * Performs additional duties as required * Troubleshoot non-conforming parts and develop rework to correct problems , Basic Qualifications: • Bachelor of Science Degree from an accredited institution., • Strong verbal and written communication., • Ability to prioritize in a fast-paced environment., • Ability to meet the requirements pertaining to Vision Acuity Testing under the Quality Assurance Manual., • Advanced Microsoft Office skills, including Excel and Word., • Bachelor's Degree in Material Science or Metallurgy from an accredited institution., • Minimum of 3 years of Engineering experience in a manufacturing environment., • Quality or Engineering experience in the Aerospace industry., • Experience in the forging or metals industry., • Knowledge of statistical techniques, SPC, FMEA., • Experience with geometric dimension and tolerance (GD&T) principles., • Experience with the use of measuring devices common to the manufacturing industry such as calipers and micrometers., • Working knowledge of ISO9000 and AS9100 quality standards and material specifications., • Medical/Prescription Drug/Dental/Vision Benefits on Day 1 of employment, • 5% Annual Target Performance Pay, • Paid Time Off (PTO), • 11 paid holidays per year, • Employee Life Insurance, • Employee Assistance Program , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email , The Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

Avantor is looking for a Material Handler with Inventory experience to join our team. The Material Handler works under close supervision, expedites the movement of parts and material between production areas by listing or otherwise moving raw materials and/or parts. Prepares and coordinates schedules for pulling and delivering materials to control the flow of goods and regulate production floor space. Safely operates appropriate equipment (forklifts, hoists, crane, etc.) required to move materials along production floor. Follows all safety rules and practices. What we're looking for * Education: High School Diploma or GED required * OSHA Forklift experience required * HAZMAT certification a plus * Collaboration Tool:Basic Computer Skills * Experience: 0-1 year Warehouse with Inventory experience * Familiar with warehouse systems, WMS - SAP, RF units. * Able to handle stress caused in meeting deadlines with tight scheduling requirements. * Able to shift priorities easily. * Able to use hands and feet simultaneously and for repetitive movements. * Must have responsible work habits. * Available to work shift and occasional weekend. * Able to use proper techniques to lift up to 75 pounds. * The ability to follow directions with emphasis on safety is extremely important. LANGUAGE SKILLS: Ability to read, analyze, and interpret SOP's, coverage, documents, and regulations. Ability to write reports and business correspondence. Ability to effectively establish rapport, present information and respond to questions from managers, clients, customers and the public. Skill and ability to meet people and listen. MATHEMATICAL SKILLS: Ability to add and subtract two digit numbers and to multiply and divide with 10's and 100's. Ability to perform these operations using units of American money and weight measurement, volume, and distance. Understanding of metric system measurements is beneficial. REASONING ABILITY: Ability to apply common sense understanding to carry out detailed and uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. OTHER: Skill and ability to type. Skill and ability to operate a computer. Skill and ability to organize and prioritize work. Skill and ability to meet deadlines and operate office equipment. Skill and ability to use Microsoft office tools and company software. How you will thrive and create an impact Warehouse material handlers' essential duties are to perform various tasks in the warehouse such as but not limited to: * Inventory: Keep accurate records and reports. Assist in physical inventories and cycle counts. Ensure proper stock rotation. May key inventory adjustments in computer. * Inbound: Unload trucks, trailers, containers of freight, counting products, compare to manifest to check all shipments for damage, infestation, or production code dates. Material handlers must report shortages, damages, and mis-shipments on appropriate forms. Also be able to sign for inbound shipments when necessary. All inbound shipments are moved safely to storage locations to be efficiently stacked as store merchandise. * Order Picking: Ensure that the correct product number, quantity and type (lot, batch, serial number) of product are picked. Transport orders to shipping locations or delivery platforms with material handling equipment such as but not limited to fork trucks, cherry pickers, or pallet jacks. Materials handlers must be able to label, stencil, tag, mark orders, band, bundle, wrap, over-pack, and palletize as required. * Outbound: Compare quantity, labeling and address with order to ensure out-going shipments are complete and correct. Assign signature for outbound as necessary. Efficiently move product, cartons and or pallets into trailers, rail cars or containers. * Equipment: Maintain equipment in a neat, clean and orderly fashion. Operate equipment safely and efficiently. Comply with company standards and OSHA requirements. * Other Duties: Repack or re-box cases per customer instructions. Repair and consolidate damaged goods as required. Operate shrink-wrap machine. Charge forklift battery as needed; stack and or separate good from bad pallets when necessary; clean railcars, trailers, and truck docks, bays as requested. * Performs other duties as assigned. ENVIRONMENTAL WORKING CONDITIONS & PHYSICAL EFFORT (Under Typical Positions) The work environment characteristics and physical effort described here are representative of those an associate encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the associate is exposed to an industrial warehouse environment. The associate works near moving mechanical machinery and noise level in the work environment is usually loud. The job requires working in heights, exposure to changes in temperature, driving equipment, and maybe exposed to dust, fumes, or gases. The associate is required to stand and walk for the majority of the working day. The physical requirements of the job are for associates to talk, hear, bend/stoop, squat, crawl, climb height, reach above shoulder height, crouch, kneel, balance, and push/pull. Furthermore, the job requires associates to lift/carry/push or pull up to 75 pounds with or without assistance. Associates use both hands for repetitive actions such as grasping and manipulating as well as both feet for repetitive movement operating foots controls. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. Privacy Policy: We will use the personal information that you have submitted to us in order to consider your application for the relevant role. Your privacy is important to us. Please click here for our Privacy Policy which explains the purposes for which we will use your personal information and the ways in which we will handle and retain your information. It also explains the rights you have in relation to your information, and how to contact us with any queries or requests. The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of employees assigned to this position. Avantor is proud to be an equal opportunity employer. Why Avantor? Dare to go further in your career. Join our global team of 14,000+ associates whose passion for discovery and determination to overcome challenges relentlessly advances life-changing science. The work we do changes people's lives for the better. It brings new patient treatments and therapies to market, giving a cancer survivor the chance to walk his daughter down the aisle. It enables medical devices that help a little boy hear his mom's voice for the first time. Outcomes such as these create unlimited opportunities for you to contribute your talents, learn new skills and grow your career at Avantor. We are committed to helping you on this journey through our diverse, equitable and inclusive culture which includes learning experiences to support your career growth and success. At Avantor, dare to go further and see how the impact of your contributions set science in motion to create a better world. Apply today! Pay Transparency: The expected pre-tax pay for this position is $35,500.00 - $56,925.00 Actual pay may differ depending on relevant factors such as prior experience and geographic location. EEO Statement: We are an Equal Employment/Affirmative Action employer and VEVRAA Federal Contractor. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected Veteran status, or any other characteristic protected by federal, state/province, or local law. If you need a reasonable accommodation for any part of the employment process, please contact us by email at ___and let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this email address. For more information about equal employment opportunity protections, please view the Know Your Rights ___. Privacy Policy: We will use the personal information that you have submitted to us in order to consider your application for the relevant role. Your privacy is important to us. Please ___ for our Privacy Policy which explains the purposes for which we will use your personal information and the ways in which we will handle and retain your information. It also explains the rights you have in relation to your information, and how to contact us with any queries or requests. 3rd Party Non-Solicitation Policy: By submitting candidates without having been formally assigned on and contracted for a specific job requisition by Avantor, or by failing to comply with the Avantor recruitment process, you forfeit any fee on the submitted candidates, regardless of your usual terms and conditions. Avantor works with a preferred supplier list and will take the initiative to engage with recruitment agencies based on its needs and will not be accepting any form of solicitation.

Role Overview This Maintenance AEM (Automated Equipment Mechanic) position will work both independently and with other members of our maintenance and engineering teams to provide various types of support for equipment in our Battery Pilot and Manufacturing areas. Responsibilities: • Provide multi-discipline capability to repair, maintain, install and make improvements to Mixing, coating, slitting and calendaring equipment equipment (includes mechanical, electrical, pneumatics, hydraulics), • Work with other members of the engineering and operations team to resolve equipment issues, • Perform alignment and adjustments as needed on production equipment, • Perform preventive maintenance (PMs) on a wide variety of equipment, • Utilize hand tools as well as maintenance shop equipment to perform tasks as needed Required Skills/Experience: • Highly involved and motivated with a high level of mechanical / electrical troubleshooting skills, • Ability to change focus based on priorities, • Mechanical equipment repair training and/or demonstrated experience, • Able to read and interpret mechanical/electrical machine drawings, • Controls / PLC experience a plus, • Bridgeport mill , metal lathe and light fabrication experience is a plus, • Significant walking or other means of mobility, • Ability to work effectively with minimal supervision, • Must have the ability to work individually and with a team as needed, • Good team player - willing to be flexible and work with maintenance trades as needed, • Excellent safety record - places safety and environment as top priority in all work, • Knowledge of Lock Out / Tag Out process, • Must be able to work in dark-room conditions if needed, • Able to work occasional overtime, • Able to work in a standing position for an extended period of time, • Wear personal protective equipment as required, • Good communication skills for daily interaction with maintenance and operations staff, • Working knowledge of Microsoft Office and maintenance software tools., • Must be able to work Monday-Friday either 5-8 hour or 4-10 hour day shifts. EOE Policy Statement: All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or disability. Estimated Salary: $32.00 - $40.00 Experience Level: 5-10 Years Requisition ID: 1808

• Job Identification 117018, • Job Category Operations, • Posting Date 04/02/2026, 05:08 PM, • Locations 181 McKee Rd, Rochester, NY, 14611, US (On-site), • Apply Before 06/26/2026, 04:00 AM, • Job Schedule Full time, • Remote Work Schedule Availability? None, • LinkedIn Recruiter Tag #LI-CC2 Basic Function: Work in all metal forgings positions to assist operators in the completion of customer orders. This position is based in our Rochester, NY facility. Candidates should be shift flexible and able to work 12-hour shifts. Responsibilities: • Assist in the set-up and operation of hydraulic industrial forging equipment, • Set, adjust and monitor CN programs to process hot and cold forging rings, • Measure and record dimensions of forgings using scales, calipers and other tools, • Set, adjust and monitor furnaces to ensure material is heated properly and fully, • Follow all Howmet quality procedures to meet customer requirements, • Read and interpret travelers to create forgings meeting customer prints, • Interpret basic drawings to ensure parts and tooling are conforming, • Visually inspect parts to identify and notify engineering of defects, • Use forklifts and manipulators to transport and move hot and cold material, • Perform preventative maintenance daily, • Clean, paint and maintain assigned cell as required by your supervisor, • Work with other departments and shifts to ensure business needs are met, • Follow all safety procedures and assist in notification of improvement areas, • Strong teamwork skills in order to work with different teams and leads on a daily basis, • May be required to wear a respirator or supplied air system, • High school diploma or equivalent, • Ability to read a ruler and compete basic arithmetic, • Must be able to carry out instructions furnished in written, oral or diagram form., • Ability to multi-task and overcome obstacles as they arise, • Continuously lift up to 30 lbs, • Ability to work 12 hour shifts, • Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position. , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email , The Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

Role Overview We are looking for a Pipefitter to join our Advanced Materials & Chemicals department in Rochester, NY As a Pipefitter you will perform the following duties: • Pipefitter to provide multi-discipline capability to repair, maintain, install and make improvements on chemical processing equipment and building services (includes process piping, building service piping, pneumatics, and hydraulics), • Ability to work with variety of materials and piping system components (stainless steel, steel, glass-lined, plastic, copper, fibercast, etc.), • Ability to achieve a high level of process expertise to effectively troubleshoot and repair equipment, including root cause analysis., • Includes maintenance of steam traps, specialized valves, filtration systems, steam ejectors, and other specialized equipment., • Execute preventive and predictive maintenance programs., • Working knowledge of Microsoft Office and maintenance software tools., • Flexibility to change based on priorities, • Some experience or expertise in mechanical, process controls would be a plus., • Welding certification a plus. Requirements: • Dependable, maintain good attendance, • Maintain a clean work area and operate in a safe manner at all times., • Must demonstrate effective analytical troubleshooting skills, • Able to read pipe and machine drawings, • Understanding of piping codes for hazardous environments (flammable liquids), • Ability to work effectively with minimal supervision, • Excellent safety record - places safety and environment as top priority in all work, • Knowledge of Lock Out / Tag Out, • Good communication skills - daily communications with leaders, maintenance planner, technical staff, engineering and operations as needed., • Team player - willing to be flexible, often work in other areas and with other trades as needed to support maintenance team., • Significant walking, climbing stairs or other means of mobility., • Ability to reach, bend, stoop, push and/or pull, and frequently lift up to 30 pounds and occasionally lift/move 40 pounds., • Ability to work off of ladders or scaffolding, and in awkward positions, • Indoor and outdoor work assignments, • Wear protective clothing and/or Personal Protective Equipment required by the work environment or governmental regulations. Qualifications: • Graduate of apprentice program or equivalent demonstrated skill level, • HS diploma EOE Policy Statement: All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or disability. Estimated Salary: $32.00 - $40.00 Experience Level: 10+ Years Requisition ID: 1786

Job Description The Wares Processor is responsible for production in the hard lines department. This individual will price and tag / label products according to standard operating procedures. They will also provide excellent customer service and maintain a clean, neat, and safe work environment. This position may also be cross-trained and responsible for additional duties. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Accurately assess and sort hard line products based on quality standards., • Accurately tag and label products based on pricing guide system., • Generates a minimum of 8,000.00 in store sales from items produced during every two week production period., • Maintains a production minimum of 40 totes per day., • Continuously put forth effort in increasing and demonstrating knowledge of hard line items., • Push, place, and maintain merchandise on the sales floor., • Ensure safety procedures are followed during packing and movement of equipment., • Maintain a friendly and helpful attitude toward our customers and team members;, • Greet customers in a friendly and enthusiastic manner;, • Must follow Goodwill of the Finger Lakes values at all times;, • Address customer concerns in a courteous and respectful manner, while following retail policies. Seek assistance of supervisor, when necessary, to resolve concerns., • Act as a positive member of the team by receiving and providing ideas or concerns to coworkers and management in a timely and supportive fashion., • Maintains clean, stocked, and prepared work stations, requests needed supplies to supervisor., • Maintains interior and exterior of store in a neat, clean, organized manner (including but not limited to vacuuming, dusting, cleaning bathrooms, mopping floor), • Perform other duties as assigned by supervisor. QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. This position is required to work nights, weekends, and holidays. EDUCATION AND/OR EXPERIENCE: High school diploma or GED preferred. Previous retail experience preferred. LANGUAGE SKILLS: • Ability to read and understand documents such as time cards and policy manuals., • Ability to write routine reports., • Ability to speak effectively and communicate clearly to other employees and customers. WORK ENVIRONMENT: While performing the duties of this job the employee is usually working in a store environment. At times this employee may be exposed to the outside environment when receiving donations. The employee will also be exposed to the donation processing area which is a warehouse-like environment. AVAILABILITY: Must have open and flexible availability, and be willing to work evenings and weekends. PHYSICAL DEMANDS: Physical Demands- Wares Processor Frequency Never Almost Never Occasionally Frequently Always Sitting X Standing X Walking X Bending over X Crawling X Reaching Overhead X Crouching X Kneeling X Balancing X Lifting and Carrying 10 lbs. or less X 11 to 25 lbs. X 26 to 50 lbs. X 51 to 75 lbs. X 76 to 100 lbs. X over 100 lbs. X Push/ Pull Max Force 0 to 20 lbs. X 21 to 39 lbs. X 40 to 59 lbs. X 60 to 100 lbs. X Addendum: The production rates seen in this description are based on a workweek of 37.5 hours. Varying full time and part time classification production sale expectations will be calculated using the table below. 20 hours $4,267 25 hours $5,333 30 hours $6,400 37.5 hours $8,000 We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

The apparel sorter sorts and prepares the donated apparel to be able to sell in the salvage market.The Apparel Processor is responsible for production in the salvage department.This individual will sort, hang, tag, and label products according to standard operating procedures.They will also provide

The Opportunity: Avantor is looking for a Material Handler with Inventory experience to join our team. The Material Handler works under close supervision, expedites the movement of parts and material between production areas by listing or otherwise moving raw materials and/or parts. Prepares and coordinates schedules for pulling and delivering materials to control the flow of goods and regulate production floor space. Safely operates appropriate equipment (forklifts, hoists, crane, etc.) required to move materials along production floor. Follows all safety rules and practices. What we're looking for * Education: High School Diploma or GED required * OSHA Forklift experience required * HAZMAT certification a plus * Collaboration Tool:Basic Computer Skills * Experience: 0-1 year Warehouse with Inventory experience * Familiar with warehouse systems, WMS - SAP, RF units. * Able to handle stress caused in meeting deadlines with tight scheduling requirements. * Able to shift priorities easily. * Able to use hands and feet simultaneously and for repetitive movements. * Must have responsible work habits. * Available to work shift and occasional weekend. * Able to use proper techniques to lift up to 75 pounds. * The ability to follow directions with emphasis on safety is extremely important. LANGUAGE SKILLS: Ability to read, analyze, and interpret SOP's, coverage, documents, and regulations. Ability to write reports and business correspondence. Ability to effectively establish rapport, present information and respond to questions from managers, clients, customers and the public. Skill and ability to meet people and listen. MATHEMATICAL SKILLS: Ability to add and subtract two digit numbers and to multiply and divide with 10's and 100's. Ability to perform these operations using units of American money and weight measurement, volume, and distance. Understanding of metric system measurements is beneficial. REASONING ABILITY: Ability to apply common sense understanding to carry out detailed and uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. OTHER: Skill and ability to type. Skill and ability to operate a computer. Skill and ability to organize and prioritize work. Skill and ability to meet deadlines and operate office equipment. Skill and ability to use Microsoft office tools and company software. How you will thrive and create an impact Warehouse material handlers' essential duties are to perform various tasks in the warehouse such as but not limited to: * Inventory: Keep accurate records and reports. Assist in physical inventories and cycle counts. Ensure proper stock rotation. May key inventory adjustments in computer. * Inbound: Unload trucks, trailers, containers of freight, counting products, compare to manifest to check all shipments for damage, infestation, or production code dates. Material handlers must report shortages, damages, and mis-shipments on appropriate forms. Also be able to sign for inbound shipments when necessary. All inbound shipments are moved safely to storage locations to be efficiently stacked as store merchandise. * Order Picking: Ensure that the correct product number, quantity and type (lot, batch, serial number) of product are picked. Transport orders to shipping locations or delivery platforms with material handling equipment such as but not limited to fork trucks, cherry pickers, or pallet jacks. Materials handlers must be able to label, stencil, tag, mark orders, band, bundle, wrap, over-pack, and palletize as required. * Outbound: Compare quantity, labeling and address with order to ensure out-going shipments are complete and correct. Assign signature for outbound as necessary. Efficiently move product, cartons and or pallets into trailers, rail cars or containers. * Equipment: Maintain equipment in a neat, clean and orderly fashion. Operate equipment safely and efficiently. Comply with company standards and OSHA requirements. * Other Duties: Repack or re-box cases per customer instructions. Repair and consolidate damaged goods as required. Operate shrink-wrap machine. Charge forklift battery as needed; stack and or separate good from bad pallets when necessary; clean railcars, trailers, and truck docks, bays as requested. * Performs other duties as assigned. ENVIRONMENTAL WORKING CONDITIONS & PHYSICAL EFFORT (Under Typical Positions) The work environment characteristics and physical effort described here are representative of those an associate encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the associate is exposed to an industrial warehouse environment. The associate works near moving mechanical machinery and noise level in the work environment is usually loud. The job requires working in heights, exposure to changes in temperature, driving equipment, and maybe exposed to dust, fumes, or gases. The associate is required to stand and walk for the majority of the working day. The physical requirements of the job are for associates to talk, hear, bend/stoop, squat, crawl, climb height, reach above shoulder height, crouch, kneel, balance, and push/pull. Furthermore, the job requires associates to lift/carry/push or pull up to 75 pounds with or without assistance. Associates use both hands for repetitive actions such as grasping and manipulating as well as both feet for repetitive movement operating foots controls. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. Privacy Policy: We will use thepersonal information that you have submitted to us in order to consider your application for the relevant role.Your privacy is important to us. Please___for our Privacy Policy which explains the purposes for which we will use your personal information and the ways in which we will handle and retain your information. It also explains the rights you have in relation to your information, and how to contact us with any queries or requests. The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of employees assigned to this position. Avantor is proud to be an equal opportunity employer. Why Avantor? Dare to go further in your career. Join our global team of 14,000+ associates whose passion for discovery and determination to overcome challenges relentlessly advances life-changing science. The work we do changes people's lives for the better. It brings new patient treatments and therapies to market, giving a cancer survivor the chance to walk his daughter down the aisle. It enables medical devices that help a little boy hear his mom's voice for the first time. Outcomes such as these create unlimited opportunities for you to contribute your talents, learn new skills and grow your career at Avantor. We are committed to helping you on this journey through our diverse, equitable and inclusive culture which includes learning experiences to support your career growth and success. At Avantor, dare to go further and see how the impact of your contributions set science in motion to create a better world. Apply today! Pay Transparency: The expected pre-tax pay for this position is $35,500.00 - $56,925.00 Actual pay may differ depending on relevant factors such as prior experience and geographic location. EEO Statement: We are an Equal Employment/Affirmative Action employer and VEVRAA Federal Contractor. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected Veteran status, or any other characteristic protected by federal, state/province, or local law. If you need a reasonable accommodation for any part of the employment process, please contact us by email at ___and let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this email address. For more information about equal employment opportunity protections, please view the Know Your Rights ___. Privacy Policy: We will use the personal information that you have submitted to us in order to consider your application for the relevant role. Your privacy is important to us. Please ___ for our Privacy Policy which explains the purposes for which we will use your personal information and the ways in which we will handle and retain your information. It also explains the rights you have in relation to your information, and how to contact us with any queries or requests. 3rd Party Non-Solicitation Policy: By submitting candidates without having been formally assigned on and contracted for a specific job requisition by Avantor, or by failing to comply with the Avantor recruitment process, you forfeit any fee on the submitted candidates, regardless of your usual terms and conditions. Avantor works with a preferred supplier list and will take the initiative to engage with recruitment agencies based on its needs and will not be accepting any form of solicitation.

The Aspen Group (TAG) is made up of a family of brands that include Aspen Dental, ClearChoice, WellNow, Lovet, and Chapter. At Aspen Dental, we put You first, offering the security and job stability that comes with working with a world-class dental support organization (DSO) while still centering al

Aspen Dental and ClearChoice, part of The Aspen Group (TAG) family of brands, strives to bring better dental care to more people. Maintain affiliation with professional groups, dental associations and dental societies to represent Aspen Dental-branded practices in the local community. At Aspen Denta

Job Description Job Description Title Maintenance Mechanic Technician B Shift Department Facilities Reports to Facilities Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join to RPO team! Job Summary: The Maintenance Mechanic Technician plays a critical role in ensuring the smooth operation of all production and support equipment within the facility. This position is responsible for performing both mechanical and electrical maintenance tasks, diagnosing equipment issues, and executing timely repairs to minimize downtime. The technician also sources replacement components or devises effective solutions to restore damaged parts, contributing to the overall efficiency and reliability of plant operations. You will: • Troubleshoot and repair mechanical and electrical problems that occur on production and facility equipment, • Work with others as well as independently, • Read blueprints and set up procedures, • Operate several electrical test devices including digital multi-meters, amp meters, oscilloscope, etc., • Machine Programming, • Troubleshooting relay logic, control system devices, analog input/output devices, and similar equipment, • Perform calibration of precision devices related to measurement of process variables. (i.e. temperature, pressure, flow, etc..)., • Perform preventative maintenance on equipment including inspection, lubrication, and evaluation, • Maintain, troubleshoot and repair hydraulic, mechanical, pneumatic, and vacuum systems., • Must be able to read, understand, and create electrical and mechanical blueprints, assembly drawings, equipment manuals, control schematics, ladder logic and other technical manuals, • Must have a complete understanding of analog and digital control signals and power distribution systems – including but not limited to 0-10VDC, 4-20MA, 24 VDC, 120VAC control circuits, and 480VAC motor circuits, • Experience in programming and troubleshooting HMI and PLC controlled systems, • Process control experience, • Knowledge and understanding of Lock Out/Tag Out procedures, • Ability to work with 3 phase 240/480 and single phase 220/110 voltage systems, • Knowledge and understanding of induction heating equipment, • Ability to repair and maintain equipment with or without documentation, • Ability to document your own work and be able to generate repair manuals and preventative maintenance procedures for equipment, • Be able to respond immediately to equipment related problems and maintain, troubleshoot, and repair equipment to ensure minimal down time., • Maintains an organized, clean, safe work area., • Able to work independently in performing various equipment maintenance tasks. You Have: * Associate of Applied Science (AAS) in Electrical/Mechanical Technology or related field preferred. * Minimum of 5 years of hands-on experience in industrial maintenance required. * Strong ability to read, analyze, and interpret complex technical documents, schematics, and equipment manuals. * Effective verbal and written communication skills to collaborate with team members and management. * Proficient in applying basic mathematical concepts to troubleshoot and resolve equipment issues. * Demonstrated ability to diagnose mechanical and electrical problems and implement timely repairs. * Familiarity with sourcing and replacing parts or fabricating repair solutions for damaged components. * Commitment to safety protocols and preventive maintenance practices in a fast-paced manufacturing setting. You are: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Culture: an energetic, caring, fun, value-driven team Environment & Physical Demands: • While performing the duties of this job, the employee is regularly required to stand: use hands to fingers, handle or feel: and reach with hands and arms. The employee frequently is required to stand, walk, stoop, kneel, crouch: and talk and hear., • The job may involve prolong periods of sitting/standing., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain)., • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp., • The employee is frequently required to use the computer., • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally works in a clean environment and works to maintain the environment as such., • Safety Glasses are required and May require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually loud. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. B Shift Schedule: Monday - Friday, 2pm - 10:30pm Before transitioning to a B shift schedule, the employee will train on A shift for 2-4 weeks, Monday - Friday 6am - 2:30pm

Job Description Job Description Title Maintenance Mechanic Technician C Shift Department Facilities Reports to Facilities Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join to RPO team! Job Summary: The Maintenance Mechanic Technician plays a critical role in ensuring the smooth operation of all production and support equipment within the facility. This position is responsible for performing both mechanical and electrical maintenance tasks, diagnosing equipment issues, and executing timely repairs to minimize downtime. The technician also sources replacement components or devises effective solutions to restore damaged parts, contributing to the overall efficiency and reliability of plant operations. You will: • Troubleshoot and repair mechanical and electrical problems that occur on production and facility equipment, • Work with others as well as independently, • Read blueprints and set up procedures, • Operate several electrical test devices including digital multi-meters, amp meters, oscilloscope, etc., • Machine Programming, • Troubleshooting relay logic, control system devices, analog input/output devices, and similar equipment, • Perform calibration of precision devices related to measurement of process variables. (i.e. temperature, pressure, flow, etc..)., • Perform preventative maintenance on equipment including inspection, lubrication, and evaluation, • Maintain, troubleshoot and repair hydraulic, mechanical, pneumatic, and vacuum systems., • Must be able to read, understand, and create electrical and mechanical blueprints, assembly drawings, equipment manuals, control schematics, ladder logic and other technical manuals, • Must have a complete understanding of analog and digital control signals and power distribution systems – including but not limited to 0-10VDC, 4-20MA, 24 VDC, 120VAC control circuits, and 480VAC motor circuits, • Experience in programming and troubleshooting HMI and PLC controlled systems, • Process control experience, • Knowledge and understanding of Lock Out/Tag Out procedures, • Ability to work with 3 phase 240/480 and single phase 220/110 voltage systems, • Knowledge and understanding of induction heating equipment, • Ability to repair and maintain equipment with or without documentation, • Ability to document your own work and be able to generate repair manuals and preventative maintenance procedures for equipment, • Be able to respond immediately to equipment related problems and maintain, troubleshoot, and repair equipment to ensure minimal down time., • Maintains an organized, clean, safe work area., • Able to work independently in performing various equipment maintenance tasks. You Have: * Associate of Applied Science (AAS) in Electrical/Mechanical Technology or related field preferred. * Minimum of 5 years of hands-on experience in industrial maintenance required. * Strong ability to read, analyze, and interpret complex technical documents, schematics, and equipment manuals. * Effective verbal and written communication skills to collaborate with team members and management. * Proficient in applying basic mathematical concepts to troubleshoot and resolve equipment issues. * Demonstrated ability to diagnose mechanical and electrical problems and implement timely repairs. * Familiarity with sourcing and replacing parts or fabricating repair solutions for damaged components. * Commitment to safety protocols and preventive maintenance practices in a fast-paced manufacturing setting. You are: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Culture: an energetic, caring, fun, value-driven team Environment & Physical Demands: • While performing the duties of this job, the employee is regularly required to stand: use hands to fingers, handle or feel: and reach with hands and arms. The employee frequently is required to stand, walk, stoop, kneel, crouch: and talk and hear., • The job may involve prolong periods of sitting/standing., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain)., • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp., • The employee is frequently required to use the computer., • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally works in a clean environment and works to maintain the environment as such., • Safety Glasses are required and May require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually loud. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. C Shift Schedule: Sunday - Thursday, 10pm - 6:30am Before transitioning to a C shift schedule, the employee will train on A shift for 2-4 weeks, Monday - Friday 6am - 2:30pm

Join our growing team as a Netflix Content Tagger to categorize and tag streaming content for improved recommendations.

Job Description Job Summary: Effectively plans and implements workload for assigned orders ensuring parts, materials and manpower are available for the production floor to perform the work. Provides other support to production and operations as required. Essential Duties and Responsibilities: • Reviews the Daily Machine Schedule and dispatches operators to machines or work centers, • Responsible for ensuring adherence to work instructions, policies, and quality specifications, • Responsible for training all operators on the molding floor, • Reviews production, cycle time, down time, and scrap in ERP software to ensure accuracy, • Maintains and updates production reports, including finished product reporting, • Communicate machine issues to Engineering and Management, • Properly tag/dispose of nonconforming parts, • Review and move finished product to the next department/location, • Follow written and verbal instructions regarding job duties and daily activities, • Ensures that all operators are prepared for daily runs including packaging material, blue books, and any requisite tools, • Accountable for various reports, data, and inventory tracking, • Maintain current job traveler visibility on all work centers and stations Additional Responsibilities: • When requested, may work on special projects and various related assignments., • Collaborate with engineering to ensure all preliminary data for machine S/U checklists and machine work order summaries are available, • May be required to work in various areas of operations when necessary, • Performs other related duties and assignments as required, • May be required to assist in reclaiming inserts, general clean up and setting up conveyors as needed. Physical Demands and Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. The employee is occasionally required to reach with hands and arms. The employee is occasionally required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 25 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from moderate to loud. Education, Skills and Experience: • High school diploma or GED required, • Minimum 2 years experience in production, • Communication skills, • Familiar with computer software, • Attention to detail, • Good math skills.

Job Description The Customer Service Team Leader is responsible for supporting the Store Manager by serving as the Manager on Duty (MOD) assuring safety, sales, production, programs and services, and other standards are maintained. This position will also partner with other members of the Retail Administration team, People Resources, and Workforce Development to ensure that all activities performed are in a manner consistent with the mission, vision, and values of Goodwill of the Finger Lakes. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Serves as Leader on Duty as dictated by schedule:, • Ensures safe work practices are followed at all times, • Ensures the facility is neat, clean, and organized to prevent injury or accident., • Ensures employees, volunteers, community service personnel, and others use safe work methods at all times., • Assists with supervising the daily cash drawer balances and deposits of store receipts:, • Assists with monitoring the operation of the cash registers to ensure the proper accountability of all transactions., • Balances cash and deposits store receipts as required., • Assists with the transmission of all required reports., • Assists with the supervision of all employees., • Reviews customer concerns and resolves appropriately., • Maintains interior and exterior of store in a neat, clean, organized manner (including but not limited to vacuuming, dusting, cleaning bathrooms, mopping floor)., • Performs the duties of various team member roles as staffing needs arise., • Asks every customer for a Round-up donation, maintains a minimum of 25% round up average., • Maintains proper security of all company assets., • Assists the Store Leader with store employee meetings as necessary for employees in assigned operation., • Assists in ensuring that store equipment is maintained in proper working order. Promptly notifies Maintenance Supervisor of defects, or IT Manager of problems relating to the computer systems and e-mail., • Contributes to the effectiveness of the store by performing all other tasks as assigned, which include coverage of the donation door, cashiering, and production of donated merchandise. SUPERVISORY RESPONSIBILITIES: Indirectly supervises store team members, volunteers, and community service personnel in assigned operation in accordance with the organization's policies and applicable laws. QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. This position is required to work nights, weekends, and holidays. EDUCATION AND/OR EXPERIENCE: Associates degree preferred. Minimum of one year retail experience with at least six months supervisory experience. Or equivalent combination of education and experience. COMPUTER SKILLS: Must be proficient in Microsoft Word, Excel, and Outlook. LANGUAGE SKILLS: • Ability to read and understand documents such as time cards and policy manuals., • Ability to write routine reports., • Ability to speak effectively and communicate clearly to other employees and customers. MATHEMATICAL SKILLS: Able to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, and sales volume. Able to apply basic financial and budgeting concepts. WORK ENVIRONMENT: While performing the duties of this job the employee is usually working in a comfortable and store environment. At times this employee may be exposed to the outside environment when receiving donations. The employee will also be exposed to the donation processing area which is a factory-like environment. SCHEDULING REQUIREMENTS: Must have open and flexible availability, and be willing to work evenings and weekends. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee must be able to travel for work-related programs and meetings. The employee is required to move stock, climb or balance on step‑ladders; stoop, kneel, crouch or crawl while setting up displays. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. The employee may bend and turn to evaluate donations moving from a bin to a processing table, as needed. The employee may also on occasion need to tag merchandise which requires use of at least one hand. Physical Demands- Customer Service Team Leader Frequency Never Almost Never Occasionally Almost always Always Sitting X Standing X Walking X Bending over X Crawling X Reaching Overhead X Crouching X Kneeling X Balancing X Lifting and Carrying 10 lbs. or less X 11 to 25 lbs. X 26 to 50 lbs. X 51 to 75 lbs. X 76 to 100 lbs. X over 100 lbs. X Push/ Pull Max Force 0 to 20 lbs. X 21 to 39 lbs. X 40 to 59 lbs. X 60 to 100 lbs. X We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law

Job Description Summary/Objective: The responsibility of the Material Handler is to optimize the profitability of Flower City by performing to the highest level of efficiency and tasks listed below. Through these activities, it will ensure that the highest level of productivity is consistently achieved. Schedule This position is for our B Shift: Monday–Friday, 3:30 PM–12:00 AM (Midnight) Candidates must be willing to train on our A Shift: Monday–Friday, 7:00 AM–3:30 PM • Training may last up to four weeks, depending on your learning pace and readiness to transition independently to the B Shift. Essential Functions: • Load and ship all outgoing material., • Receive finished Kitpacking materials and ensure accuracy of materials and shipments by verifying vendor, Sku/part number, quantity received in compliance to Pallet tag., • Pull orders to ship and check accuracy of orders., • Process & put away customer finished goods orders., • Band and shrink-wrap customer orders for shipping., • Clean and maintain shipping area., • Inspect and operate all material handling equipment., • Any other duties, as assigned. Competencies: • Shipping and Receiving, • Machine Operation, • Maintain cooperative working relationships with supervisors., • Demonstrate ability to tactfully handle difficult situations., • Consistently shows ability to recognize and deal with priorities., • Perform all duties in an independent manner with little supervision., • Recognize and perform duties which need to be performed although not directly assigned, • Seeks guidance and direction as necessary for performance of duties., • Demonstrates good judgement in investigating problems., • Respects the confidentiality of company information. Preferred Education and Experience: • A two-year degree or equivalent from a technical school preferred, • Two (2) years of work experience or an equivalent of four (4) years in the industry, • Packaging experience highly preferred Physical Demands: • Sitting, standing, and/or walking for up to eight hours per day., • Frequently required to lift and/or carry up to 30 lbs., • Occasionally required to push and/or pull up to 50 lbs., • Occasionally required to stoop, kneel, crouch, crawl, and climb., • Regularly required to talk and/or hear, see, and perform repetitive motion., • Required to see color and use depth perception. AAP/EEO Statement Flower City Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), gender, national origin, ancestry, age, physical or mental disability, military status, status as a veteran or disabled veteran, sexual orientation, gender identity or expression, marital or family status, genetic information, medical condition, or any other basis protected by applicable federal, state, or local law, ordinance, or regulation.

Job Description Monroe Tractor is a well-known and respected construction equipment and agricultural equipment dealer with over 70 years of experience servicing the northeastern US. With 18 locations throughout New York, Pennsylvania, Vermont, Connecticut, and Massachusetts, we pride ourselves on providing best-in-class sales and support to over 15,000 hardworking customers. Since our founding in 1951, the industries we serve have been transformed by the technologies, equipment, and capabilities undreamed of decades ago. But the people we serve haven't changed, and neither have we. We're still a family-owned business! We're looking for a skilled Diesel Technician with a strong background in construction heavy equipment. In this role, you'll provide professional, safe, and efficient support for our branch, handling everything from routine maintenance to complex diesel engine repairs. This position includes membership of the IUOE Local 4 Union. Qualifications • Prior experience in heavy construction equipment or agriculture equipment is preferred, • Strong independent work ethic but also able to work collaboratively with a team, • Excellent customer service skills; a builder of relationships, • Clear and concise communications, • A strong sense of urgency, focusing on time, • Computer skills, • Valid Driver's License and clean driving record is required, • Provide technical service to equipment., • Read job orders, • Observe and listen to equipment in operation to resolve malfunction issues and execute work procedures effectively., • Follow checklists to ensure all critical parts are examined., • Examine protective guards, loose bolts, and specified safety devices on trucks, and adjust as needed., • Test-drive vehicles to ensure that they run smoothly., • Tag all warranty parts and return them to the warranty clerk., • Attend training classes and keep tabs on factory technical bulletins., • Develop and maintain positive relationships with customers to increase overall customer happiness., • Properly complete the service and/or repairs assigned by the supervisor., • Complete all work according to the applicable safety requirements and published procedures., • Participate in, and utilize to the best of one's abilities, technical training as assigned by management., • Maintain your designated workspace in an organized and clean manner., • Ensure guest vehicles are returned as clean as they were before being serviced., • Show the utmost courtesy to all guests, visitors, and dealership personnel., • Make every effort to achieve the production objectives set by management., • Adhere to the manufacturer's policies and procedures as they relate to labor operations, time, and repair order documentation when performing warranty repairs and torque specifications., • Any other duties as outlined by the Service Supervisor and, or management. Monroe Tractor Technician Benefits • Annual Tool/Shoe Allowance., • Uniforms provided., • Discounts on products and services., • Health/Prescription Drug Coverage, • Diabetes Care, • Telehealth/Digital Health Solutions, • Substance Abuse/Mental Health Support & Treatment, • Dental/Vision/Hearing, • Life/Disability Insurance, • Fertility/Wellness Programs, • Accident/Surgical/Sickness and Cancer Monroe Tractor is proud to be an Equal Opportunity Employer and values diversity in the workplace. We encourage candidates from all backgrounds to apply and join a team where your work makes a difference every day. Pay is commensurate with the applicant's experience, as it relates to the position. Pay Transparency$29.64—$39.02 USD

Job Description The Arcticom Group (“TAG”) is a U.S.-based network of commercial and industrial mechanical services companies that provide HVACR service, maintenance, and installation services throughout North America. TAG is committed to being an “employer of choice” and ensuring employees have a home where they can learn and grow. With competitive compensation and an attractive benefits package, TAG is an exciting place to work. TDH, a TAG company is seeking Refrigeration Service Technicians for commercial service work in and around the Rochester, NY area Role Summary: The Journeyman Refrigeration Service Technician performs commercial service, maintenance, and repair on refrigeration systems including walk-ins, self-contained units, single systems, and rack systems. This role supports grocery and retail locations, ensuring systems operate safely and efficiently. Roles and Responsibilities: • Diagnose, repair, and maintain commercial refrigeration systems (self-contained units, walk-ins, single systems, rack systems)., • Troubleshoot electrical and mechanical refrigeration components., • Perform preventative maintenance on HVAC and refrigeration equipment., • Complete minor plumbing repairs (walk-in drains, case drains, cooling towers, water-cooled condensers)., • Inspect refrigeration, electrical, and plumbing systems to identify service needs., • Communicate service updates with store managers and directors., • Provide repair estimates and recommend equipment replacement when appropriate., • Maintain van stock, tools, and required safety equipment. Skills and Qualifications: • 2-5 + years of HVAC/R experience, • Strong diagnostic and mechanical skills, • Professional communication abilities, • Attention to detail and strong decision-making skills, • Ability to participate in on-call rotation, • Universal EPA Certification, • Electrical license, • 2–3 years minimum of grocery refrigeration experience, • HVAC/R technical school or related certifications Benefits: • Competitive pay, • Medical, dental, and vision insurance options, • Retirement savings plan with company contributions (401(k) or equivalent), • Paid vacation, holidays, and sick time, • Year-round, steady work, • Opportunities for career growth advancement, • Supportive, team-based work environment

Job Description The Softline Processor is responsible for production in the softline department. This individual will sort, hang, tag, and label products according to standard operating procedures. They will also provide excellent customer service and maintain a clean, neat, and safe work environment. This position may also be cross-trained and responsible for additional duties. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Accurately assess and sort softline products based on quality standards., • Accurately tag and label products based description within production system., • Generates a minimum of 8000.00 in store sales from items produced during every two week production period., • Continuously put forth effort in increasing and demonstrating knowledge of apparel, accessory, shoe and other softline product brands., • Maintain a friendly and helpful attitude toward our customers and team members;, • Greet customers in a friendly and enthusiastic manner;, • Must follow Goodwill of the Finger Lakes values at all times;, • Address customer concerns in a courteous and respectful manner, while following retail policies. Seek assistance of supervisor, when necessary, to resolve concerns., • Act as a positive member of the team by receiving and providing ideas or concerns to coworkers and management in a timely and supportive fashion., • Maintains clean, stocked, and prepared work stations, requests needed supplies to supervisor., • Maintains interior and exterior of store in a neat, clean, organized manner (including but not limited to vacuuming, dusting, cleaning bathrooms, mopping floor), • Perform other duties as assigned by supervisor. QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. This position is required to work nights, weekends and holidays. EDUCATION AND/OR EXPERIENCE: High school diploma or GED preferred. Previous retail experience preferred. LANGUAGE SKILLS: • Ability to read and understand documents such as time cards and policy manuals., • Ability to complete daily production reports., • Ability to speak effectively and communicate clearly to team members and customers. WORK ENVIRONMENT: While performing the duties of this job the employee is usually working in a store environment. At times this employee may be exposed to the outside environment when receiving donations. The employee will also be exposed to the donation processing area which is a warehouse-like environment. Noise level is usually moderate. Availability: Must have open and flexible availability, and be willing to work nights, weekends, and holidays. PHYSICAL DEMANDS: Physical Demands- Softline Processor Frequency Never Almost Never Occasionally Frequently Always Sitting X Standing X Walking X Bending over X Crawling X Reaching Overhead X Crouching X Kneeling X Balancing X Lifting and Carrying 10 lbs. or less X 11 to 25 lbs. X 26 to 50 lbs. X 51 to 75 lbs. X 76 to 100 lbs. X over 100 lbs. X Push/ Pull Max Force 0 to 20 lbs. X 21 to 39 lbs. X 40 to 59 lbs. X 60 to 100 lbs. X Addendum: The production rates seen in this description are based on a workweek of 37.5 hours. Varying full time and part time classification production sale expectations will be calculated using the table below. 20 hours $4,267 25 hours $5,333 30 hours $6,400 37.5 hours $8,000 We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law

Job Description JOB SUMMARY The MRI TECHNOLOGIST/TECHNICIAN, under the direct supervision of a radiologist, performs quality magnetic resonance imaging scans on patients of all ages. ABOUT US For more than 40 years, ATC Healthcare has provided leading nurses and healthcare professionals to hospitals and facilities nationwide. Healthcare systems around the U.S., including municipal health systems, multi-unit senior care companies, governments, school systems, VMS and MSP vendors trust us to deliver more than 100,000 nurses and other healthcare professionals on-demand. If you have a track record of success in healthcare, we want you to join us! We offer the following benefits: • Medical insurance, • Dental insurance, • Vision insurance, • Referral program, • Tuition reimbursement, • 401k Plan, • Flexible Schedules, • Life insurance, • Disability insurance, • Identity theft insurance Technician: Graduate of an MRI program of study at the associate’s degree level. Technologist: Graduate of an MRI program of study at the bachelor’s degree level. LICENSURE State specific; current and unrestricted license or registration to practice as an MRI technologist/technician in the state of practice, as applicable. ARRT registration. EXPERIENCE One year of current MRI technologist/technician experience in the clinical setting. CREDENTIALS Current CPR at least; and other health and screening tests as required by specific facilities and/or regulatory agencies. ENVIRONMENTAL WORKING CONDITIONS Various client facility settings; possible exposure to blood, bodily fluids, and other potentially infectious materials. REPRESENTATIVE DUTIES AND RESPONSIBILITIES • Complies with ATC policies/procedures., • Complies with client facility policies/procedures., • Documents accurately and completely services provided., • Maintains confidentiality relative to patient care and facility practices in accordance with the Health Insurance Portability and Accountability Act (HIPAA)., • Provides patient care in a non-judgmental, non-discriminatory manner that considers cultural diversity and age appropriateness so that autonomy, rights, and dignity are preserved., • Communicates information effectively to appropriate personnel., • Maintains competency by participating in continuing education programs and meets state specific requirements., • Interviews patient and explains magnetic resonance imaging procedures., • Positions patient on examining table following protocols requested by radiologist., • Enters data such as patient history, anatomical area to be scanned, orientation specified, and position of entry into the computer., • Demonstrates knowledge of cross-sectional anatomy., • Monitors patient safety and comfort and views images of area being scanned on video display screen to ensure quality of pictures. Other Duties: Please note this job summary is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may vary by assignment and may change at any time with or without notice. Equal Opportunity Employer: ATC Healthcare Services is an Equal Opportunity Employer. All applicants will be considered for employment without regards to race, color, religion, age, sex, sexual orientation, gender identity, national origin, veteran or disability status or any other category protected by Federal, State or local law. M/F/D/V EOE ADD TAG

Job Description ATC Healthcare is looking for a Licensed Practical/Vocational Nurse! The LPN/LVN provides skilled nursing services to patients in facilities, including hospitals; long term care and psychiatric hospitals; centers for the developmentally disabled; public health facilities; and veterans’ hospitals. The LPN/LVN is under the direction of a professional registered nurse or medical doctor and provides a variety of related services to maintain a therapeutic environment. ABOUT US For more than 40 years, ATC Healthcare has provided leading nurses and healthcare professionals to hospitals and facilities nationwide. Healthcare systems around the U.S., including municipal health systems, multi-unit senior care companies, governments, school systems, VMS and MSP vendors trust us to deliver more than 100,000 nurses and other healthcare professionals on-demand. If you have a track record of success in healthcare, we want you to join us! We offer the following benefits: • Medical insurance, • Dental insurance, • Vision insurance, • Referral program, • Tuition reimbursement, • 401k Plan, • Flexible Schedules, • Life insurance, • Disability insurance, • Identity theft insurance, • Completion of an accredited licensed practical nursing program., • Current and unencumbered license in the state of practice., • At least one year of experience in the last three years. Representative Duties and Responsibilities • Complies with ATC Healthcare Services policies and procedures., • The licensed practical nurse (LPN) performs nursing acts, functions or performs tasks under the delegation/supervision of the registered nurse, medical physician or midlevel providers (e.g., PA's, NP's)., • Administers nursing procedures to patients in accordance with patients nursing care plans, such as sterile dressing, soaks, compresses, enemas, suppositories, tube feeding, oxygen therapy, range of motion therapy, catheterization, diabetic care, pre- and post-operative care, etc., • Sets up prescribed medications in accordance with patients’ nursing care plans., • Administers medications to patients orally, intra-muscularly or subcutaneously., • Monitors effects of medications, records medications given to patients’ reactions., • Assists in rehabilitation programming and activities for residents, such as:, • License Development of social skills, • Development of daily living skills, • Reality orientation, • Recreational skills, etc., • Records treatment given to patients; takes/records and monitors patients’ health., • Transports/accompanies patients to procedures., • If the LPN/LVN is currently IV certified, may perform limited IV tasks as permitted by the LPN/LVN nurse., • Maintains confidentiality related to patient, family, client facility and staff in accordance with the Health Insurance Portability and Accountability Act (HIPAA)., • Provides patient care in a non-judgmental, non-discriminatory manner that considers cultural diversity and age appropriateness so that autonomy, rights, and dignity are preserved. Equal Opportunity Employer: ATC Healthcare Services is an Equal Opportunity Employer. All applicants will be considered for employment without regards to race, color, religion, age, sex, sexual orientation, gender identity, national origin, veteran or disability status or any other category protected by Federal, State or local law. M/F/D/V EOE ADD TAG

Job Description JOB SUMMARY The PHLEBOTOMIST collects and processes blood samples to be analyzed in the laboratory. ABOUT US For more than 40 years, ATC Healthcare has provided leading nurses and healthcare professionals to hospitals and facilities nationwide. Healthcare systems around the U.S., including municipal health systems, multi-unit senior care companies, governments, school systems, VMS and MSP vendors trust us to deliver more than 100,000 nurses and other healthcare professionals on-demand. If you have a track record of success in healthcare, we want you to join us! We offer the following benefits: • Medical insurance, • Dental insurance, • Vision insurance, • Referral program, • Tuition reimbursement, • 401k Plan, • Flexible Schedules, • Life insurance, • Disability insurance, • Identity theft insurance High school diploma and one of the following: • NAACLS approved phlebotomy program; State specific; ASCP, as per client requirements. EXPERIENCE At least one year phlebotomy experience in the clinical setting. CREDENTIALS Health and screening tests as required by specific facilities and/or regulatory agencies. ENVIRONMENTAL WORKING CONDITIONS Various client facility settings; possible exposure to blood, bodily fluids, and other potentially infectious materials. REPRESENTATIVE DUTIES AND RESPONSIBILITIES • Complies with ATC policies/procedures., • Complies with client facility policies/procedures., • Documents accurately and completely services provided., • Ability to select blood drawing sites, label, and collect full range of blood laboratory tests., • Maintains confidentiality relative to patient care and facility practices in accordance with the Health Insurance Portability and Accountability Act (HIPAA)., • Communicates information effectively to appropriate., • Provides patient services in a non-judgmental, non-discriminatory manner that considers cultural diversity and age appropriateness so that autonomy, rights, and dignity are preserved., • Complies with accepted ethical and professional standards of conduct. Other Duties: Please note this job summary is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may vary by assignment and may change at any time with or without notice. Equal Opportunity Employer: ATC Healthcare Services is an Equal Opportunity Employer. All applicants will be considered for employment without regards to race, color, religion, age, sex, sexual orientation, gender identity, national origin, veteran or disability status or any other category protected by Federal, State or local law. M/F/D/V EOE ADD TAG

Job Description General Job Description: Sets up and operates punch press including blanking, drawing, forming, perforating, etc. Controls proper safety devices, feeds the material into dies and keeps stock well lubricated. Procures proper dies, sets up punch presses and feeds for all types of materials. All types of dies may be set up including compound, multiple, closing, trimming, shearing, drawing, perforating, cut-off, shimmy, coining, extruding, etc. Minimum Qualifications: • Ability to read blue prints a must., • Fluency in verbal and written English, • Ability to use shop math, • High school diploma, GED or equivalent, • Must supply own tools Specific Duties: • Ensure Punch Press is in full operation during the required work hours, • Inspect material; checking for type and measuring dimensions using a micrometer and a QA tag., • Shear material using a “Traveler”, • Make the part according to specifications on dimension and quantity, • Measure blank or strip using measurement tape or dial caliper, • Use shearing machine as per drawing or instructions, • Set up the punch press (under supervision if necessary) and punch first part, • Ensure that inspection of first and last piece is done by operator and QA, • Run job and check parts using SPC, • Tumble parts and remove burrs, • Spot weld parts, if necessary, • Inspect part according to print, • Get QA approval of part., • Manufacture and inspect part to blueprint, • Upkeep daily preventative maintenance log Required Tool List: • 6” Verniers, • Tape Measure, • Ball Peen Hammer, • Set Allen Wrenches This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Job Description · Provide onsite support to Authorized Users with operational and technical support and to meet specified SLAs. · Troubleshoot, diagnose and resolve the tickets (Hard IMAC and break fix) that needs onsite intervention. · Coordinate with higher level remote support teams and Supplier’s Service Desk teams for ticket resolution. · Participate in war rooms for critical incident management when required or at Customer’s discretion. · Resolve incidents at end-users’ desks when resolution cannot be achieved by remote support. · Resolve break-fix incidents, either by own intervention or requesting and coordinating technical service with OEM. · Provide Smart hands and feet support for audio / video conferencing devices in alignment with the operating model. · Plan, schedule and fulfil all IMAC (Install, Move, Add, Change) requests according to defined processes, approvals. · Request, coordinate and facilitate visits when required for IMAC in alignment with the operating model. · Follow the Customer’s requirements and procedures for escorting vendors and guests during facilitation of visits. · Update CMDB records during the IMAC process where appropriate to make sure that added/removed devices and spare parts are reflected properly in the Customer system(s). · Manage use of any manufacturer warranty and technical support to limit repair cost and facilitate incident resolution. · Install and test replacement parts for supported devices. · Schedule supported device installation, Software and Hardware activity with End User at their convenience to minimize disruption. · Coordinate physical move of end user devices within same office (performing physical move of end user devices outside of the office is out of scope). · Manage any end-user Service Requests (e.g., desktop, mobile) which require local interaction at the supported sites. · Desk side assistance for IT devices (laptop, desktop, and mobiles). · Provide loaner device to authorized Customer end users in case of break-fix to continue end users work, utilizing Customer provided List of Authorized Users · Perform soft IMAC, Image loading where this cannot be executed remotely using Customer provided tools. · Inform Customer end user on expected resolution time on for active Incidents in assigned incident queue. · Provide onsite depot support for receiving, shipping, packing, update AMDB / CMDB, apply asset tag, imaging, staging, storing the devices and spare parts at Customer provided facilities. · Keep device levels (pool), installation of pool devices with standard image, personalizing of exchange device, coordination of OEM according Customer requirements. · Consult with Customer prior to and during ordering of new devices. · Provide smart hands support for onsite Server and Networking devices with remote support supervision. Deskside support services and other duties as required. Company DescriptionWe are committed to delivering exceptional services and professionals with proven work ethics and processes. Provide an exceptional client experience Deliver on our commitments Build trust by thinking and acting with integrity Create an environment that inspires innovationWe are committed to delivering exceptional services and professionals with proven work ethics and processes.\r\nProvide an exceptional client experience\r\nDeliver on our commitments\r\nBuild trust by thinking and acting with integrity\r\nCreate an environment that inspires innovation

Job DescriptionDescription: This is a B-Shift Position starting at 4:00 PM and includes a 10% premium on base rate Please apply on our website Position Summary Operates CNC (Computer Numerically Controlled) lathes and/or mills to machine metallic and nonmetallic workpieces to produce precision machined parts at acceptable levels of efficiency and quality on both new and existing production processes. Operates machining centers on repetitive production work involving skill and dexterity in the operating. Attention is required to prevent damaged product or damage to machine center. Making necessary minor machine adjustments to ensure satisfactory production. Inspect work for obvious defects and dimensional integrity Requirements: Essential Duties and Responsibilities In addition to adhering to the policies of the company outlined in the PGM Employee Handbook, an individual servicing in this capacity shall consistently be able to: This is a B-Shift Position starting at 4:00 PM and includes a 10% premium on base rate • Operate CNC mills and/or lathes, running new and existing production jobs of moderate complexity without assistance unless unusual problems occur. Must be able to make minor adjustments when necessary., • Monitor perishable tooling inventory for each assigned job., • Perform all required inspection duties to maintain acceptable quality levels., • Inform supervisor of any problems associated with equipment, processes or procedures and offer ideas or possible solutions., • Complete job-related paperwork accurately and completely which includes: expedite sheets, move tickets, and job cards., • Perform routine preventative maintenance, as required, including but not limited to daily preventative machine maintenance logs., • Analyzes blueprint and specifications manual for requirements such as dimensions and tolerances, tooling instructions on fixturing, gauging, print rev. level, and cutting instruments., • Computes unspecified dimensions and necessary machine settings as required by the work order., • Positions and secures tools in holders, lifts work piece manually or with hoist, and secures work piece in chuck or appropriate fixture., • Starts machine, turns or initiates software program and engages feed. Directs coolant flow to tool and work piece., • Observes material removal step(s) to verify process integrity and detect excessive wear or malfunction., • Verifies conformance of machined work pieces to specification tolerances., • Plots dimensional data on control charts and collects SPC Data. Initiates proper procedural action if control chart warning limits are identified or out-of-tolerance conditions are experienced., • Basic and Advanced Vantage training, • Follow company policies as outlined in the employee handbook and values This job has no supervisory responsibilities. Education, Training and/or Experience High school diploma or general education degree (GED); and one to five years related experience and/or training or equivalent combination of education and experience. Internal Training Requirements • Company Practices & Policies, • Lock Out/Tag Out Video, • Company Benefits Orientation, • Personal Protection Equipment, • Mission, Vision & Values Training, • Right-to-Know Training, • Values Based Leadership, • Traveler Sign-Off, • Bloodborne Pathogen, • Hazardous Communication

Job DescriptionDescription: Position Summary Operates CNC (Computer Numerically Controlled) lathes and/or mills to machine metallic and nonmetallic workpieces to produce precision machined parts at acceptable levels of efficiency and quality on both new and existing production processes. Operates machining centers on repetitive production work involving skill and dexterity in the operating. Attention is required to prevent damaged product or damage to machine center. Making necessary minor machine adjustments to ensure satisfactory production. Inspect work for obvious defects and dimensional integrity Requirements: Essential Duties and Responsibilities In addition to adhering to the policies of the company outlined in the PGM Employee Handbook, an individual servicing in this capacity shall consistently be able to: • Operate CNC mills and/or lathes, running new and existing production jobs of moderate complexity without assistance unless unusual problems occur. Must be able to make minor adjustments when necessary., • Monitor perishable tooling inventory for each assigned job., • Perform all required inspection duties to maintain acceptable quality levels., • Inform supervisor of any problems associated with equipment, processes or procedures and offer ideas or possible solutions., • Complete job-related paperwork accurately and completely which includes: expedite sheets, move tickets, and job cards., • Perform routine preventative maintenance, as required, including but not limited to daily preventative machine maintenance logs., • Analyzes blueprint and specifications manual for requirements such as dimensions and tolerances, tooling instructions on fixturing, gauging, print rev. level, and cutting instruments., • Computes unspecified dimensions and necessary machine settings as required by the work order., • Positions and secures tools in holders, lifts work piece manually or with hoist, and secures work piece in chuck or appropriate fixture., • Starts machine, turns or initiates software program and engages feed. Directs coolant flow to tool and work piece., • Observes material removal step(s) to verify process integrity and detect excessive wear or malfunction., • Verifies conformance of machined work pieces to specification tolerances., • Plots dimensional data on control charts and collects SPC Data. Initiates proper procedural action if control chart warning limits are identified or out-of-tolerance conditions are experienced., • Basic and Advanced Vantage training, • Follow company policies as outlined in the employee handbook and values This job has no supervisory responsibilities. Education, Training and/or Experience High school diploma or general education degree (GED); and one to five years related experience and/or training or equivalent combination of education and experience. Internal Training Requirements • Company Practices & Policies, • Lock Out/Tag Out Video, • Company Benefits Orientation, • Personal Protection Equipment, • Mission, Vision & Values Training, • Right-to-Know Training, • Values Based Leadership, • Traveler Sign-Off, • Bloodborne Pathogen, • Hazardous Communication, • Fire Extinguisher Safety Benefits: • Competitive Pay, • Medical effective on start date, • Dental, • Life Insurance (plus additional supplemental coverage), • 401(k) program, • Short & Long Term Disability, • Profit Sharing Program, • Vacation Program, • Educational Financial Assistance, • Flexible Spending Accounts, • Health Savings Accounts, • And others!

Job DescriptionDescription: General Job Summary: Using job production documentation, selects, loads, and aligns tools into press brake machines in order to produce metal parts from raw stock while ensuring the safety integrity of the tool and the quality of the finished part. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Ensure all safety processes and procedures are defined for the job., • Reviews job description (job traveler) and determines tool requirement., • Using material handling equipment, loads and aligns appropriate tool into press brake machine., • Sets up blanks for forming in machine., • Selects appropriate packaging material and sets up supply., • Make the first part to ensure quality., • Confers with toolmakers and quality personnel to resolve problems., • Inspects first run of the part. Submits to inspection for blue tag. Runs parts., • Instructs machine operator on part production., • Performs periodic quality checks., • Schedules work on various press brake machines to ensure daily/weekly production requirements are met., • May train new brake operators., • May assist in scheduling jobs in other presses., • Maintains inventory of tools and fixtures., • Assists with other duties as assigned by supervisor/ manager. Supervisory Responsibilities: None Requirements: Education High school diploma or general education degree (GED); or equivalent combination of education and experience. One year certificate from college or technical school preferred Experience 2-3 years related experience or training Computer Skills: None Other Requirements: Understanding and ability to use inspection gauges (verniers, micrometers, height stand, pins) and material handling equipment. Language Skills: Intermediate Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or Associates of organization. Mathematical Skills: Basic Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability: Intermediate Skills: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Physical Demands: The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to stand; walk; sit; maneuver through the office and factory; use hands to finger, handle, or feel; reach with hands and arms; grasping and twisting; talk or hear; lift and/or move equipment/product weighing up to 50 pounds. Work with another associate to lift anything greater than 50lbs. Work Environment: The work environment characteristics described here are representative of those an Associate encounter while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. While performing the duties of this job the Associate is regularly exposed to extreme heat; extreme cold; wet and/or humid conditions. While performing the duties of this job the noise level in the work environment is usually loud.

Job DescriptionDescription: Position Summary Operates CNC (Computer Numerically Controlled) lathes or mills or to machine metallic and nonmetallic work pieces to produce precision machined parts to acceptable levels of efficiency and quality on both new and existing production processes. Operates machining centers on repetitive production work involving skill and dexterity in the operating. Attention is required to prevent damage product or damage to machine center. Makes necessary machine adjustments to ensure satisfactory production. Inspect work for obvious defects and dimensional integrity. Requirements: Essential Duties and Responsibilities In addition to adhering to the policies of the company outlined in the PGM Employee Handbook, an individual servicing in this capacity shall consistently be able to: • Operate CNC mills and/or lathes running new and existing production processes using proper procedures and equipment to establish and ensure consistent and quality parts, optimum perishable tooling usage, and acceptable quality levels., • Work with Set-up Operators debugging and developing new production processes and learning st-up skills., • Perform routine preventative maintenance, as required., • Provide training and instruction as needed to CNC I and CNC II operators in the operation and preventative maintenance of CNC mills and/or lathes and proper usage of required inspection equipment., • Monitor and maintain perishable tooling inventory for each assigned job., • Establish and perform all required inspection duties to maintain acceptable quality levels., • Record Statistical Process Control (SPC) data, as required., • Inform supervisor of any problems associated with equipment, processes or procedures trying to explore, develop and recommend continuous improvement ideas., • Analyzes blueprint and specifications., • Complete job related paperwork accurately and completely, which includes: expedite sheets, move tickets, and job cards., • Basic GD&T skills., • Basic and Advanced Vantage training., • Perform basic repeat set-ups, tear downs and organize perishable tool list – tool list to proper kit location., • Verifies spindle, feed rate, depth of cut and tool positions relative to work piece., • Follow company policies as outlined in the employee handbook., • Other duties may be assigned. Supervisory Responsibilities This position has no supervisory responsibilities. Education, Training and/or Experience High school diploma or general education degree (GED) and/or technical school, associates degree; and three to five years related experience and/or training; or equivalent combination of education and experience. Internal Training Requirements • Company Benefits Orientation, • Bloodborne Pathogen, • Company Practices & Policies, • Fire Extinguisher Safety, • Mission, Vision & Values Training, • Hazardous Communication, • Values Based Leadership, • Lock Out/Tag Out Video, • Traveler Sign-Off, • Personal Protection Equipment, • Right-to-Know Training

Job Description ATC Healthcare is looking for a Licensed Practical/Vocational Nurse! The LPN/LVN provides skilled nursing services to patients in facilities, including hospitals; long term care and psychiatric hospitals; centers for the developmentally disabled; public health facilities; and veterans’ hospitals. The LPN/LVN is under the direction of a professional registered nurse or medical doctor and provides a variety of related services to maintain a therapeutic environment. ABOUT US For more than 40 years, ATC Healthcare has provided leading nurses and healthcare professionals to hospitals and facilities nationwide. Healthcare systems around the U.S., including municipal health systems, multi-unit senior care companies, governments, school systems, VMS and MSP vendors trust us to deliver more than 100,000 nurses and other healthcare professionals on-demand. If you have a track record of success in healthcare, we want you to join us! We offer the following benefits: • Medical insurance, • Dental insurance, • Vision insurance, • Referral program, • Tuition reimbursement, • 401k Plan, • Flexible Schedules, • Life insurance, • Disability insurance, • Identity theft insurance, • Completion of an accredited licensed practical nursing program., • Current and unencumbered license in the state of practice., • At least one year of experience in the last three years., • Background screening as required by state or client contract., • Drug screening as required by the contract., • Work sites vary., • Possible exposure to blood, bodily fluids, and other potentially infectious materials., • Applicant should be able to read medical equipment and documents. Pushing carts and medical equipment may be a component of the job., • Complies with ATC Healthcare Services policies and procedures., • The licensed practical nurse (LPN) performs nursing acts, functions or performs tasks under the delegation/supervision of the registered nurse, medical physician or midlevel providers (e.g., PA's, NP's)., • Administers nursing procedures to patients in accordance with patients nursing care plans, such as sterile dressing, soaks, compresses, enemas, suppositories, tube feeding, oxygen therapy, range of motion therapy, catheterization, diabetic care, pre- and post-operative care, etc., • Sets up prescribed medications in accordance with patients’ nursing care plans., • Administers medications to patients orally, intra-muscularly or subcutaneously., • Monitors effects of medications, records medications given to patients’ reactions., • Assists in rehabilitation programming and activities for residents, such as:, • License Development of social skills, • Development of daily living skills, • Reality orientation, • Recreational skills, etc., • Records treatment given to patients; takes/records and monitors patients’ health., • Transports/accompanies patients to procedures., • If the LPN/LVN is currently IV certified, may perform limited IV tasks as permitted by the LPN/LVN nurse., • Maintains confidentiality related to patient, family, client facility and staff in accordance with the Health Insurance Portability and Accountability Act (HIPAA)., • Provides patient care in a non-judgmental, non-discriminatory manner that considers cultural diversity and age appropriateness so that autonomy, rights, and dignity are preserved. Equal Opportunity Employer: ATC Healthcare Services is an Equal Opportunity Employer. All applicants will be considered for employment without regards to race, color, religion, age, sex, sexual orientation, gender identity, national origin, veteran or disability status or any other category protected by Federal, State or local law. M/F/D/V EOE ADD TAG

Job Description ATC Healthcare is looking for a Licensed Practical/Vocational Nurse! The LPN/LVN provides skilled nursing services to patients in facilities, including hospitals; long term care and psychiatric hospitals; centers for the developmentally disabled; public health facilities; and veterans’ hospitals. The LPN/LVN is under the direction of a professional registered nurse or medical doctor and provides a variety of related services to maintain a therapeutic environment. ABOUT US For more than 40 years, ATC Healthcare has provided leading nurses and healthcare professionals to hospitals and facilities nationwide. Healthcare systems around the U.S., including municipal health systems, multi-unit senior care companies, governments, school systems, VMS and MSP vendors trust us to deliver more than 100,000 nurses and other healthcare professionals on-demand. If you have a track record of success in healthcare, we want you to join us! We offer the following benefits: • Medical insurance, • Dental insurance, • Vision insurance, • Referral program, • Tuition reimbursement, • 401k Plan, • Flexible Schedules, • Life insurance, • Disability insurance, • Identity theft insurance, • Completion of an accredited licensed practical nursing program., • Current and unencumbered license in the state of practice., • At least one year of experience in the last three years., • Work sites vary., • Possible exposure to blood, bodily fluids, and other potentially infectious materials., • Applicant should be able to read medical equipment and documents. Pushing carts and medical equipment may be a component of the job., • Complies with ATC Healthcare Services policies and procedures., • The licensed practical nurse (LPN) performs nursing acts, functions or performs tasks under the delegation/supervision of the registered nurse, medical physician or midlevel providers (e.g., PA's, NP's)., • Administers nursing procedures to patients in accordance with patients nursing care plans, such as sterile dressing, soaks, compresses, enemas, suppositories, tube feeding, oxygen therapy, range of motion therapy, catheterization, diabetic care, pre- and post-operative care, etc., • Sets up prescribed medications in accordance with patients’ nursing care plans., • Administers medications to patients orally, intra-muscularly or subcutaneously., • Monitors effects of medications, records medications given to patients’ reactions., • Assists in rehabilitation programming and activities for residents, such as:, • License Development of social skills, • Development of daily living skills, • Reality orientation, • Recreational skills, etc., • Records treatment given to patients; takes/records and monitors patients’ health., • Transports/accompanies patients to procedures., • If the LPN/LVN is currently IV certified, may perform limited IV tasks as permitted by the LPN/LVN nurse., • Maintains confidentiality related to patient, family, client facility and staff in accordance with the Health Insurance Portability and Accountability Act (HIPAA)., • Provides patient care in a non-judgmental, non-discriminatory manner that considers cultural diversity and age appropriateness so that autonomy, rights, and dignity are preserved. Equal Opportunity Employer: ATC Healthcare Services is an Equal Opportunity Employer. All applicants will be considered for employment without regards to race, color, religion, age, sex, sexual orientation, gender identity, national origin, veteran or disability status or any other category protected by Federal, State or local law. M/F/D/V EOE ADD TAG

Job Description SUMMARY: The Material Handler- Runner maintains efficient warehouse operations by moving product to and from various workstations, breaking down bales, and assisting with station clean-up. The position combines physical material handling with quality control. The Material Handler- Runner must have strong adherence to all safety policies and always wear all required personal protective equipment. The Material Handler- Runner will also sort and prepare the donated apparel to be able to sell in the salvage market when needed. The Warehouse Runner is responsible for production in the salvage department. This individual will sort, hang, tag, and label products according to standard operating procedures. They will also provide excellent customer service and maintain a clean, neat, and safe work environment. This position may also be cross-trained and responsible for additional duties. ESSENTIAL DUTIES AND RESPONSIBILITIES: Material Handling & Processing • Transport products between workstations in coordination with forklift operators to maintain workflow efficiency, • Load and manage clothing on grading tables and conveyors, • Process a minimum daily quota of 12 Gaylords (1,300 pounds or more), • Break down clothing bales to optimize processing speed, • Transfer processed items to baling station, • Record and track material weights, including:, • Daily starting and ending weights Individual Gaylord weights (summer, winter, and oversized "Biggie" categories), • Inspect donated merchandise for quality standards, • Sort and categorize clothing based on:, • Material type, • Size, • Style, • Seasonal categories (summer/winter), • Process retail store clothing returns, • Route non-qualifying items to appropriate clearance channels, • Prepare salvage-grade apparel for resale according to standard operating procedures Operational & Safety Compliance • Maintain an organized, safe, and clean workstation free of personal items and potential hazards, • Follow all safety protocols and properly use the required safety equipment, • Report any safety hazards or concerns immediately, • Protect company assets, including donated goods, and report any incidents of theft or misappropriation, • Cross training opportunity for warehouse operations and forklift operations, • Perform other duties as assigned by management QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to demonstrate proficiency in meeting competencies required for position; able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed below are representative of the knowledge, skill and/or ability required. EDUCATION AND EXPERIENCE: Minimum Qualifications (Education, Experience, Skills): • High School Diploma, GED, or equivalent experience., • Ability to be trained and take direction., • Ability to speak and read English proficiently., • Must be 18 years of age or older., • Must be able to use a calculator to add and subtract numbers. Ability to speak and read English proficiently. Able to read and write reports, compile data as needed. Communicates effectively with others and provides essential customer service duties either verbally or via computer e-mail. REASONING ABILITY: Able to define problems, collect data, establish facts, and draw valid conclusions. Able to interpret instructions furnished in written, oral or diagram form. WORK ENVIRONMENT: While performing the duties of this job the employee is usually working in a combination of a warehouse and retail store environment. At times this employee may be exposed to the outside environment. The noise in this environment will be moderate to loud. May require travel to other states or Goodwill territories. AVAILABILITY: Must have open/flexible availability and be willing to work evenings & weekends. PHYSICAL DEMANDS: Physical Demands- Apparel Processor Frequency Never Rarely Occasionally Frequently Always Sitting X Standing X Walking X Bending over X Crawling X Reaching Overhead X Crouching X Kneeling X Balancing X Lifting and Carrying 10 lbs. or less X 11 to 25 lbs. X 26 to 50 lbs. X 51 to 75 lbs. X 76 to 100 lbs. X over 100 lbs. X Push/ Pull Max Force 0 to 20 lbs. X 21 to 39 lbs. X 40 to 59 lbs. X 60 to 100 lbs. X

Job DescriptionDescription: General Job Summary: In addition to performing laser operation, ensures jobs are set-up to meet MPCD/customer requirements. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Understands and follows all applicable safety policies and procedures., • With Manufacturing Supervisor, schedule daily/weekly workload., • Download part program into machine controller., • Ability to perform adjustments of the tube laser to remedy slag, burn through, burrs, and un-desirable conditions., • Utilizes hand instruments (micrometers, calipers, height gage) to perform first piece/blue tag inspections., • Obtains inspection approval for each job., • Works with Engineering to resolve problems and production issues., • Train new Associates on equipment operation, department processes and procedures., • Ability to troubleshoot and resolve basic errors with the operation of the tube laser., • May be required to work/assist Maintenance with issues outside of basic errors/issues., • Ability to successfully load material and record production in Plex. Supervisory Responsibilities: None Requirements: Education High school diploma or general education degree (GED); One year certificate from college or technical school preferred or equivalent combination of education and experience. Experience 2-3 years related experience or training Computer Skills: None Other Requirements: Ability to use quality measurement devices such as micrometer, verniers, calipers height gauges. Language Skills: Intermediate Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or Associates of organization. Mathematical Skills: Basic Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability: Intermediate Skills: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Physical Demands: The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to stand; walk; sit; maneuver through the office and factory; use hands to finger, handle, or feel; reach with hands and arms; grasping and twisting; talk or hear; lift and/or move equipment/product weighing up to 50 pounds. Work with another associate to lift anything greater than 50lbs. Work Environment: The work environment characteristics described here are representative of those an Associate encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. While performing the duties of this job the Associate is regularly exposed to extreme heat; extreme cold; wet and/or humid conditions. While performing the duties of this job the noise level in the work environment is usually loud. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description Job Summary: Conducts machine setup for production and sample runs. Process development and troubleshooting. Essential Duties and Responsibilities: • Checks schedule daily for next job in queue., • Prepares and sets up machinery for scheduled production runs by reading quality plans, WI’s and or job orders for specifications., • Inspects and prepares mold for job run., • Selects, positions and secures mold in machine., • Completes all necessary paperwork and reports for job, including down time., • Answer Machine alarms., • Shut down and purge machines., • After job is complete, tears down job,, • When requested, may work on special projects and various related assignments., • Serves as back up Material Handler when necessary., • May trim degate or inspect parts., • May be required to compile various reports and data tracking., • Maybe required to read and interpret equipment manuals and suggest or assist in performing maintenance, service or repairs., • May be required to work in various areas of operations when necessary The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. The employee is occasionally required to reach with hands and arms. The employee is occasionally required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 75 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists The noise level in the work environment may range from moderate to loud. Education, Skills and Experience: • Two year college degree or a minimum of 5 yrs. experience in setup and processing injection mold operations, • Ability to read and interpret blueprints., • Knowledgeable in engineering protocols, • Familiar with metrology, preferably optical metrology., • Familiar with various trade tools., • Strong attention to detail., • Good computer, math skills., • Strong communication skills., • Work independently with minimal supervision.

Job Description ATC Healthcare is looking for Registered Nurses! Registered Nurses provide skilled nursing services to patients in a variety of healthcare settings. The Registered Nurse, or RN, is responsible for working with other healthcare professionals to help treat patients with various injuries, illnesses, or disabilities. ABOUT US For more than 40 years, ATC Healthcare has provided leading nurses and healthcare professionals to hospitals and facilities nationwide. Healthcare systems around the U.S., including municipal health systems, multi-unit senior care companies, governments, school systems, VMS and MSP vendors trust us to deliver more than 100,000 nurses and other healthcare professionals on-demand. If you have a track record of success in healthcare, we want you to join us! REQUIREMENTS OF THE RN POSITION: • Completion of an accredited Registered Nurse program of study., • Current and unencumbered license in the state of practice., • At least one year of experience as a Registered Nurse., • The RN should be able to read medical equipment and documents. Pushing carts and medical equipment may be a component of the job., • Registered Nurses must be able to lift at least 30 pounds; walk up and down the stairs; position patients; walk long distances; and stand for prolonged periods., • Complies with ATC Healthcare Services policies and procedures., • Provides general care services, including assessment, analysis, planning, implementation, and evaluation., • Assess healthcare needs of patients through a variety of routine assessments, and develops, implements, and evaluates individualized nursing and health care plans accordingly., • Perform health screenings of patients or clients., • Respond to emergency healthcare needs of patients., • Collect and records data specific to the health status of patients or clients., • Administer medications/treatments as prescribed by medical practitioners., • Responsibilities will vary depending on department of assignment (e.g., Emergency Room/Clinic, advisory to non-medical administrator, infection control, nurse/health education development, quality assurance, nurse anesthetist, etc.)., • Maintains confidentiality related to patient, family, client facility and staff in accordance with the Health Insurance Portability and Accountability Act (HIPAA)., • Complies with accepted ethical conduct and professional standards of nursing practice as set forth by the American Nurses Association or equivalent nursing organization., • Provides patient care in a non-judgmental, non-discriminatory manner that considers cultural diversity and age appropriateness so that autonomy, rights, and dignity are preserved., • Performs other duties as assigned., • Medical insurance, • Dental insurance, • Vision insurance, • Referral program, • Tuition reimbursement, • 401k Plan, • Flexible Schedules, • Life insurance, • Disability insurance, • Identity theft insurance, • Compensation $57/hour Equal Opportunity Employer: ATC Healthcare Services is an Equal Opportunity Employer. All applicants will be considered for employment without regards to race, color, religion, age, sex, sexual orientation, gender identity, national origin, veteran or disability status or any other category protected by Federal, State or local law. M/F/D/V EOE ADD TAG

Job Description JOB SUMMARY The ADULT MEDICAL SURGICAL REGISTERED NURSE (RN) is a healthcare provider who through education and experience possesses a distinct body of knowledge and skills relative to the care of the adult patient across the lifespan who is experiencing general medical conditions or general surgical interventions. He/she applies general nursing knowledge in assessing, implementing, and evaluating patient response to general and specific conditions, general therapies and interventions. He/she initiates nursing care, health teaching, and health counseling that supports life and restores well-being. Nursing care is performed in accordance with the nurse practice act and under the direction and supervision of the appropriate client representative(s) on the assigned Adult Medical Surgical Unit. ABOUT US For more than 40 years, ATC Healthcare has provided leading nurses and healthcare professionals to hospitals and facilities nationwide. Healthcare systems around the U.S., including municipal health systems, multi-unit senior care companies, governments, school systems, VMS and MSP vendors trust us to deliver more than 100,000 nurses and other healthcare professionals on-demand. If you have a track record of success in healthcare, we want you to join us! We offer the following benefits: • Medical insurance, • Dental insurance, • Vision insurance, • Referral program, • Tuition reimbursement, • 401k Plan, • Flexible Schedules, • Life insurance, • Disability insurance, • Identity theft insurance Graduate of an accredited Diploma, Associate or Baccalaureate School of Nursing. LICENSURE Current and unrestricted RN nursing license in the state of practice. EXPERIENCE One year of experience as an RN in an Adult Medical Surgical Unit in the last three years. CREDENTIALS Current CPR at least to the BLS level; and other health and screening tests as required by specific facilities and/or regulatory agencies. ENVIRONMENTAL WORKING CONDITIONS Various client facility settings; possible exposure to blood, bodily fluids, and other potentially infectious materials. REPRESENTATIVE DUTIES AND RESPONSIBILITIES • Complies with ATC policies/procedures., • Complies with client facility nursing policies/procedures., • Conducts individualized patient assessment, prioritizing collection of data based on individual needs and condition., • Conducts ongoing nursing assessment as dictated by the patient’s condition and in accordance with client facility’s protocols., • Collaborates with other team members in the development, implementation, and evaluation of an individualized plan of care., • Performs appropriate treatments and therapies as ordered by physician in an appropriate and timely fashion., • Provides individualized patient and family teaching., • Documents patient assessments, findings, and psychosocial responses to nursing interventions, • Initiates emergency measures according to adult and client resuscitation protocols., • Maintains confidentiality related to patient, family, client facility and staff in accordance with the Health Insurance Portability and Accountability Act (HIPAA)., • Provides patient care in a non-judgmental, non-discriminatory manner that considers cultural diversity and age appropriateness so that autonomy, rights, and dignity are preserved., • Advocates patient rights with respect to advance directives and organ donation., • Reports patient condition to appropriate personnel during each shift, as needed based on individualized patient assessment., • Maintains competency by participating in continuing education programs and meets state specific requirements., • Complies with accepted ethical conduct and professional Standards of Nursing Practice as set forth by the American Nurses Association or equivalent national organization., • Demonstrates ability to delegate effectively and appropriately. Other Duties: Please note this job summary is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may vary by assignment and may change at any time with or without notice. Equal Opportunity Employer: ATC Healthcare Services is an Equal Opportunity Employer. All applicants will be considered for employment without regards to race, color, religion, age, sex, sexual orientation, gender identity, national origin, veteran or disability status or any other category protected by Federal, State or local law. M/F/D/V EOE ADD TAG

Job Description JOB SUMMARY The ENDO/GASTROINTESTINAL (GI), GASTROENTEROLGY (GE) LABORATORY NURSE works in collaboration with doctors to diagnose and treat conditions affecting the gastrointestinal tract. GI/GE nurses might work as scrub or circulators in the GI lab (colonoscopy, endoscopy). The GI/GE nurse may work in a variety of settings such as hospitals, physician practices and outpatient clinics. The GI/GE Lab nurse works under the supervision of physicians and nursing supervisors/managers. ABOUT US For more than 40 years, ATC Healthcare has provided leading nurses and healthcare professionals to hospitals and facilities nationwide. Healthcare systems around the U.S., including municipal health systems, multi-unit senior care companies, governments, school systems, VMS and MSP vendors trust us to deliver more than 100,000 nurses and other healthcare professionals on-demand. If you have a track record of success in healthcare, we want you to join us! We offer the following benefits: • Medical insurance, • Dental insurance, • Vision insurance, • Referral program, • Tuition reimbursement, • 401k Plan, • Flexible Schedules, • Life insurance, • Disability insurance, • Identity theft insurance Graduate of an accredited school of registered nursing. LICENSURE Current unrestricted nursing license in the state of practice. EXPERIENCE At least one year of experience in a GI/ENDO CREDENTIALS: BLS and ACLS; PALS required of nurses serving the pediatric population ENVIRONMENTAL WORKING CONDITIONS Various client facility settings; possible exposure to blood, bodily fluids, and other potentially infectious materials. REPRESENTATIVE DUTIES AND RESPONSIBILITIES • Complies with ATC policies/procedures., • Complies with client facility nursing policies/procedures., • Practices registered nursing within scope of practice promulgated by the Board of Nursing., • Provides continuous nursing assessments of patients' physical and emotional needs and corresponding therapeutic interventions., • Documents accurately and completely services provided., • Collects patient data and completes required documentation with appropriate responses according to unit standards., • Maintains confidentiality relative to patient care and facility practices in accordance with the Health Insurance Portability and Accountability Act., • Communicates information effectively to appropriate personnel., • Provides patient services in a non-judgmental, non-discriminatory manner that considers cultural diversity and age appropriateness so that autonomy, rights, and dignity are preserved., • Provides required care while maintaining a safe, therapeutic environment., • Develops, implements and evaluates comprehensive nursing plan of care based on the nursing process which incorporates the plans of other disciplines and the continuing care needs of patients so as to meet identified patient care needs and outcome goals., • Plans and prepares for the pre-procedure nursing care of the patient., • Verbally validates procedure to be done and ensures consents are signed and in the proper timeframe as per facility protocols., • Answers patient questions and explains each task performed. Reassures family members., • Completes pre-procedure assessment, identifies the patient's baseline vital signs, including ECG and pulse oximetry., • Reviews for current allergies, medications and medical history. Documents and flags allergies., • Completes pre-procedure documentation in a legible and concise manner., • Reviews history, physical and laboratory values provided by the physician., • Checks and signs off the physician’s orders., • Performs/ensures laboratory tests ordered by physician are completed or drawn., • Inserts IV and administers pre-procedure medications as ordered by physician., • Keeps family members informed of any delays., • Functions in role of scrub/circulator in some units and assists physician with procedures, handles specimens as per protocol., • Post procedure care and discharge instructions as dictated by facility protocols., • Initiates cardiopulmonary resuscitation in age appropriate manner, in accordance with facility protocols, and applicable advance directives., • Advocates patient rights with respect to advance directives., • Maintains competency by participating in continuing education programs and meets state specific requirements., • Complies with accepted ethical conduct and professional standards of nursing practice as set forth by the American Nurses Association or equivalent nursing organization. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may vary by assignment and may change at any time with or without notice. Equal Opportunity Employer: ATC Healthcare Services is an Equal Opportunity Employer. All applicants will be considered for employment without regards to race, color, religion, age, sex, sexual orientation, gender identity, national origin, veteran or disability status or any other category protected by Federal, State or local law. M/F/D/V EOE ADD TAG

Job Description ABOUT US For more than 40 years, ATC Healthcare, a Joint Commission Certified Company, has provided leading nurses and healthcare professionals to hospitals and facilities nationwide. Healthcare systems around the U.S., including municipal health systems, multi-unit senior care companies, governments, school systems, VMS and MSP vendors trust us to deliver more than 100,000 nurses and other healthcare professionals on-demand. If you have a track record of success in healthcare, we want you to join us! ABOUT THE EMERGENCY DEPARTMENT REGISTERED NURSE POSITION We have an exciting opening for an EMERGENCY DEPARTMENT REGISTERED NURSE (RN). The Emergency Department RN possesses a distinct body of knowledge and skills relative to the care of patients across the lifespan who are experiencing life-threatening conditions requiring complex clinical assessment, technologically intense therapies, and interventions. The RN applies specialized nursing knowledge in assessing, implementing, and evaluating patient response to complex conditions, therapies, and interventions. The RN initiates nursing care, health teaching, and health counseling that supports life and restores well-being. Nursing care is performed in accordance with the nurse practice act and under the direction and supervision of the appropriate client representative(s) on the assigned Emergency Care Unit. We offer the following benefits: • Medical insurance, • Dental insurance, • Vision insurance, • Referral program, • Tuition reimbursement, • 401k Plan, • Flexible Schedules, • Life insurance, • Disability insurance, • Identity theft insurance CREDENTIALS Current CPR at least to the ACLS level; TNCC and/or PALS, as required by client facility. ENVIRONMENTAL WORKING CONDITIONS Various client facility settings; possible exposure to blood, bodily fluids, and other potentially infectious materials. REPRESENTATIVE DUTIES AND RESPONSIBILITIES • Complies with ATC policies/procedures., • Complies with client facility nursing policies/procedures., • Conducts individualized patient assessment, prioritizing collection of data based on individual needs and condition., • Conducts ongoing nursing assessment as dictated by the patient’s condition and in accordance with client facility’s protocols., • Collaborates with other team members in the development, implementation, and evaluation of an individualized plan of care., • Performs appropriate treatments and therapies as ordered by physician in an appropriate and timely fashion., • Performs hemodynamic monitoring as ordered by physician in an appropriate manner., • Provides individualized patient and family teaching., • Documents patient assessments, findings, and psychosocial responses to nursing interventions, • Initiates emergency measures according to adult, pediatric and client advanced resuscitation protocols., • Maintains confidentiality related to patient, family, client facility and staff in accordance with the Health Insurance Portability and Accountability Act (HIPAA)., • Provides patient care in a non-judgmental, non-discriminatory manner that considers cultural diversity and age appropriateness so that autonomy, rights, and dignity are preserved., • Advocates patient rights with respect to advance directives and organ donation., • Reports patient condition to appropriate personnel during each shift, and as needed based on individualized patient assessment., • Maintains competency in emergency care by participating in continuing education programs and meets state specific requirements., • Complies with accepted ethical conduct and professional Standards of Nursing Practice as set forth by the American Nurses Association or equivalent national organization. Equal Opportunity Employer: ATC Healthcare Services is an Equal Opportunity Employer. All applicants will be considered for employment without regards to race, color, religion, age, sex, sexual orientation, gender identity, national origin, veteran or disability status or any other category protected by Federal, State, or local law. M/F/D/V EOE ADD TAG

Job Description Paid Media Manager The Opportunity: Soleo Communications is seeking an innovative, self-motivated individual with strong communication and project management skills to join our Digital Marketing Team. As the Senior Paid Media Manager, you will be responsible for the development and execution of a multi-channel paid media marketing plan for Soleo’s owned and operated digital brands, including RateRetriever.com. This a unique opportunity to take on a leadership role within the organization and contribute to initiatives that are core to Soleo’s strategic growth plan. Our ideal candidate possesses 5+ years of experience managing paid campaigns with over $100k in monthly ad spend. You should have a firm grasp of how to leverage paid search and other paid channels including display, video, and social media to formulate a comprehensive digital marketing strategy that will drive scalable growth and brand awareness for each of our brands. You should understand what it takes to compete for some of the most competitive keywords and have mastered best practices around account structure, campaign types, automated bidding strategies and conversion tracking. The ability to communicate complex strategies and provide data-driven performance updates to the Executive Team is essential to your success. Responsibilities: • Campaign Strategy: Develop a comprehensive paid media and digital marketing strategy for Soleo’s owned and operated digital brands. Be prepared to think differently and introduce creative solutions for driving brand awareness on a fixed budget., • Media Buying: Leverage your understanding of customer needs, performance KPIs and compliance requirements to develop scalable lead generation strategies that deliver on ROAS targets. Campaigns will include paid search as well as other channels like affiliate, display, email, and more, depending on factors like goals and budget., • Brand Awareness Strategy: Assist in developing a strategy for ongoing brand awareness to support organic traffic growth in addition to paid traffic., • Forecasting + KPI Tracking: Assist the executive team in developing forecasts, performance targets, and a standard set of KPIS to be monitored across all of Soleo’s owned and operated digital brands., • CRO: Partner closely with other members of the digital marketing team to ensure that content and landing page design is consistent with the paid media strategy ensuring an excellent consumer experience and converstion rate optimization. Be prepared to share feedback and suggestions for CRO based on campaign performance., • Testing: Create and maintain a log of A/B tests to validate digital marketing strategies and continuously optimize performance. Report results to executive leadership., • Research + Planning: Utilize online tools and other resources to conduct keyword and competitive research, identify growth opportunities, and stay on top of key industry trends.Position Requirements:, • Bachelor’s degree, with related experience in the marketing/advertising field, • 3+ years experience directly configuring, and optimizing, paid search campaigns with both low budget ($5k $10k/month) and medium budget ($25k-$50k/month) constraints., • 3+ years of media buying experience and exposure to all the major platforms including Google, Microsoft, Facebook, Instagram, TikTok, LinkedIn, etc, • Strong project and performance management skills including the ability to delegate work and provide constructive feedback, • Solid understanding of paid search best practices including:, • Experience writing effective search ad copy, • Experience identifying testing opportunities and implementing experiments, • Ability to audit and uncover account performance or technical issues, • Knowledge of automated bidding strategies including smart bidding, • Knowledge of new campaign types including dynamic search and performance max, • Proven experience with Brand Awareness campaigns targeted specifically at growing visitors to web properties, • Experience with 3rd party and SEM Tools (SEMrush), • Experience using Google Analytics and Google Tag Manager to configure conversion trackingAbout Soleo: Soleo is a leader in performance marketing. We are a well-established and trusted partner and technology innovator in the industries we serve. With over 20 years of experience, we have earned our reputation by building world-class platforms, maintaining the highest standards of compliance, being selective about our suppliers, and providing best-in-class customer support. Powered by JazzHR yccX9pxQ3n

Job Description We are seeking experienced Visual Inspectors to perform 100% visual inspection under a microscope on small, precision-machined metal components used in aerospace and defense applications. This is a focused, detail-oriented role—your primary responsibility is to identify cosmetic and surface defects and accurately document pass/fail results. What You’ll Do: • Perform microscope inspection of CNC-machined Aerospace parts per work instructions, samples, and acceptance criteria., • Identify and segregate nonconforming product (e.g., nicks, burrs, scratches, dents, tool marks, FOD, coating/plating blemishes)., • Record and document inspection results (pass/fail, defect codes/notes) in excel logs and ERP system., • Tag and escalate defects to the Quality Lead/Inspector for disposition., • Maintain a clean, organized, FOD-controlled workstation; handle delicate parts safely., • Meet daily throughput and accuracy targets while following AS9100/ISO 9001 procedures and EHS guidelines., • Utilize and care for inspection tools (microscopes, optical comparators, calipers, micrometers, height gages, Radius gages, chamfer/countersink gage, bore gage, thread pitch gage (for simple confirmation checks) for visual inspections. Requirements What You’ll Bring: • 3+ years of prior experience with Microscopes, for visual inspections in precision manufacturing environments (aerospace/defense, medical device, optics, or similar), required., • Exceptional attention to detail, steady hands, and comfort with repetitive, precision work., • Ability to read and follow written work instructions with GD&T and basic drawings/visual standards., • Basic computer skills for entering inspection results., • Physical ability to sit/stand for extended periods, use hands to handle small parts, and maintain visual focus under magnification., • Must know how to use inspection and metrology equipment & tools; microscopes, calipers, micrometers, gage blocks, stage micrometers, optical comparators, height gages, Radius gages, chamfer/countersink gage, bore gage, thread pitch gage (for simple confirmation checks) to conduct visual inspections., • High school diploma/GED required., • Prior experience with MS Office Suite Software, excel, and ERP systems, preferably Epicor., • Willingness to work assigned shift and overtime as needed.Company DescriptionWe’re Infinia Search. We’re a relationship-driven search firm that proves that talent, ambition, curiosity, and an infinite work ethic creates exponential results for our clients and candidates.We’re Infinia Search. We’re a relationship-driven search firm that proves that talent, ambition, curiosity, and an infinite work ethic creates exponential results for our clients and candidates.

Job Description ATC Healthcare is looking for a PATIENT CARE TECHNICIAN (PCT)! The PCT provides services to meet the personal care needs of the patient in various healthcare settings under the direction of a licensed professional. The PCT provides nursing care specific to the age of the population served. ABOUT US For more than 40 years, ATC Healthcare has provided leading nurses and healthcare professionals to hospitals and facilities nationwide. Healthcare systems around the U.S., including municipal health systems, multi-unit senior care companies, governments, school systems, VMS and MSP vendors trust us to deliver more than 100,000 nurses and other healthcare professionals on-demand. If you have a track record of success in healthcare, we want you to join us! We offer the following benefits: • Medical insurance, • Dental insurance, • Vision insurance, • Referral program, • Tuition reimbursement, • 401k Plan, • Flexible Schedules, • Life insurance, • Disability insurance, • Identity theft insurance, • Completion of a state-approved certified nursing program and/or successful passing of a competency evaluation program which meets state regulations., • Meets state specific certification requirements and possesses unrestricted certification as a PCT., • At least One - two years of work experience as a PCT in a healthcare setting., • Complies with ATC policies/procedures., • Complies with client facility nursing policies/procedures., • Maintains confidentiality relative to patient care and facility practices in accordance with the Health Insurance Portability and Accountability Act (HIPAA)., • Communicates information effectively to appropriate personnel., • Documents patient care as assigned in accordance with facility policies and procedures., • Follows the patient's plan of care as assigned., • Delivers personal care services to patients as assigned., • Takes vital signs and documents according to facility protocols., • Records patient input and output as assigned., • Maintains competency by participating in continuing education programs and meets state specific requirements., • Provides patient care in a non-judgmental, non-discriminatory manner that considers cultural diversity and age appropriateness so that autonomy, rights, and dignity are preserved., • Performs other duties as assigned., • Duties, responsibilities, and activities may vary by assignment and may change at any time with or without notice. Equal Opportunity Employer: ATC Healthcare Services is an Equal Opportunity Employer. All applicants will be considered for employment without regards to race, color, religion, age, sex, sexual orientation, gender identity, national origin, veteran or disability status or any other category protected by Federal, State or local law. M/F/D/V EOE ADD TAG