Tank jobs in Los Angeles, California - Page 2Create job alerts

Job DescriptionDescription: Drive service truck to various job sites, clean/empty portable restrooms and maintain them to Andy Gump, Inc. quality standards. Represent our company in a friendly and professional manner. Use NAV mobile app daily to report/communicate/document problems, potential problems, inaccessibility to units etc. Receives Direction From: Sanitation Service Supervisor Classification: Non-exempt Wage Range: $21.00 - $30.00 per hour Examples of Essential Duties and responsibilities: The duties and responsibilities include, but are not limited to, the following: • Safely drive company vehicle to job sites to service portable restrooms and maintain them to Andy Gump, Inc. quality standards., • Perform job duties in a safe manner., • Work independently. Be a self-starter. Manage time efficiently., • Replenish all paper i.e. toilet tissue, seat pads and paper towels if applicable., • Operate company vehicle safely following all applicable driving rules and maintain vehicle in good, clean operating condition., • Project professional and friendly image to customers., • Document / report any and all units that were not serviced and why daily., • Perform daily inspection of vehicle. Complete vehicle inspection report and notify supervisor of any problems., • Use smart phone to access NAV mobile app daily., • Report any accident or damages to supervisor immediately., • Schedule may include nights, weekends and holidays., • Cooperate with coworkers, • Obtain/maintain a Class B Commercial driver license with tank and air brake endorsements., • All other duties assigned by management. Requirements: Accountability: Service a minimum of 6 units per hour. Number of units will vary according to route assigned. Qualifications Guidelines Experience: Prior experience is preferred but not required. Training can be provided. Andy Gump, Inc. quality standards will be taught. Education and/or Training: On the job training is provided. Knowledge: Knowledge of smart phones is preferred. Skills/Abilities: Ability to understand, read and write English. All work orders verbal and written are in English. Good communication skills are required. Ability to adapt to all traffic conditions. Use technology to work efficiently. Special requirements: Clean DMV history. Class B driver license with tank and air brake endorsements. Current DMV medical card. Physical requirements/working conditions: Work is performed outdoors in all weather conditions. Position requires getting in and out of truck several times throughout the day. Must be able to pull/carry hose from truck to portable restroom to service. Will also be required to carry bucket with water and deodorizer weighing approximately 40 lbs from truck to portable restroom. Vacuum pump on truck is a little noisy. • Driving 45%, • Bending 10%, • Walking 10%, • Lifting 10% Average lbs. 40, • Standing 10%, • Lifting overhead 5% Average lbs. 30, • Reaching 10% We are committed to providing equal employment opportunities to all employees and applicants without regard to race, ethnicity, religion, color, sex (including childbirth, breastfeeding and related medical conditions), gender, gender identity or expression, sexual orientation, national origin, ancestry, citizenship status, uniform service member and veteran status, pregnancy, age, protected medical condition, genetic information, disability or any other protected status in accordance with all applicable federal, state, and local laws. Andy Gump participates in the E-Verify program.

Driver must gas up once vehicle is at half a tank of gas. Valid CA Driver's License and eligibility for company vehicle insurance. Illumination Foundation Driver.

Must have 2 or more years experience with sit down forklifts. All warehouse equipment includes, forklift, clamp truck, etc. Fill forklift propane tank at end of shift.

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: • Our people are our #1 priority., • Teamwork is the best way to solve problems., • Safety is critical. Everyone is responsible for creating a safe work environment., • We strive to find new and better ways of doing things every day., • Clear expectations and directions are always given., • Frequent coaching and support lead to great performers and high quality for our customers., • A manager's job is to set each employee up for success every day., • We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together., • Performing arc and torch cutting and gouging., • Using generators, compressors, tuggers, blowers, grinders, and other power and air tools., • Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o’clock and “goat”/tractor)., • Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment., • Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment., • Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations., • Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment., • Operating forklifts, man lifts, boom lifts, and other large lifting equipment., • Knowledge of crane operations (including rigging and signaling), • Reading detailed erection and fabrication drawings., • Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks., • Completing job safety analysis, safety audits, site-specific training, and other safety training., • Follow directions and work professionally with other crew members. \, • Other duties as assigned. Requirements, • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development. LOhiGlT6VK

Job Description Mission Statement The Salvation Army, an international movement, is an evangelical part of the universal Christian church. Its message is based on the Bible. Its ministry is motivated by the love of God. Its mission is to preach the gospel of Jesus Christ and to meet human needs in His name without discrimination. Position Summary A Crew Team Member is part of a group of staff who works as a team and rotate responsibilities. They provide assistance in serving food, setting up the dining hall, and cleaning the dining hall and dishes. Essential Functions • Set & clear tables for each meal, • Serve the food, • Follow rotating schedule set by Dining Room Supervisor, • Protect the health & safety of campers & staff, • Be responsible for the safety and upkeep of the dish room, • Maintain cleanliness of dish room & equipment, • Stack, wash & store dishes and upkeep of dish room, prep room & kitchen floors, • Attend & actively participate in Orientation, • Maintain a standard of high integrity & morality that always promotes Jesus Christ, including break days and time off, • Maintain a high standard of personal living, cleanliness, • Responsible for any other duties assigned by the Camp Director or his designate, • Assist with and be involved with the supervision of campers during camp programs when available Working Conditions APPEARANCE and PERSONAL CLEANLINESS: • Tie back hair and use head cover as designated by the Food Service Manager, • Wash hands regularly throughout shift, • Wear a clean apron while working, • Dress should be appropriate and modest and should not include the following:, • No tank tops, • No clothing that reveals mid-drifts or cleavage, • No clothes worn that others can see boxers or underwear., • Minimum 18 years of age, • Interest and ability to work with children Ability to sit, walk, stand, bend, squat, climb, kneel, and twist on an intermittent or sometimes continuous basis. Ability to grasp, reach overhead, push, pull and carry objects such as chairs, dish racks, tables, etc. Skills, Knowledge & Abilities • Ability, both visual and auditory, to identify safety hazards and monitor guest and staff behavior and enforce appropriate safety regulations and emergency procedures, • Ability to walk, stand, bend and stretch, • Ability to lift, up to approximately 50 pounds, and occasional lifting of equipment., • Ability to safely and properly use maintenance equipment, • Physical ability to respond appropriately to situations requiring first aid. Must be able to assist campers in an emergency (fire, evacuation, illness or injury)., • Willing to live in a camp setting and work irregular hours. Operate with daily exposure to the sun and heat and other environmental conditions

Job Description Position Purpose: The Transportation Driver driver is located at Women and Children’s Program in South Los Angeles. The driver is responsible to transport mothers and children safely to appointments and other transports. The Transportation Driver will also uphold the JWCH mission to improve the health status and wellbeing of under-served segments of the population of Los Angeles County through the direct provision or coordination of health care, health education, services, and research. Principal Responsibilities: • Transports women and children residing at a residential treatment program in South Los Angeles to after hour and weekend appointments in a safe and professional manner., • Transports residents to 12 Step Meetings, spiritual & religious services, and therapeutic outings, • Capable of making independent decisions for transport, • Able to use navigation system, and make independent decision about transportation directions, • Creates a create weekly and daily transportation schedule with Program Administrator that is understandable to staff and clients, • Communicates daily with staff about status of transportation schedule, • Upholds client rules while being transported (i.e. no food in car, do not deviate), • Participate in weekly case conference with the Treatment Team, as needed, • Keeps the vehicle clean, regular maintenance, and gas tank filled, • Follow all COVID 19 and other health and safety protocols, • Keeps a Transportation Log Book that tracks trips destination, departure and return, • Assists clients with establishing bus routes via Google Maps, • Coordinate Uber Health transports, • Pick up program items from Corporate Office or other location as indicated, • Distribute program marketing cards in the community during drop offs, • Assist with program needs at the facility when not transporting, • High School Diploma or GED, • Valid California Class B Driver’s license, • Minimum 2 years professional driving experience., • 5 years DMV printout of no driving violations., • Must pass mandatory and random drug and alcohol screenings., • Culturally competent and able to work with a diverse population., • Knowledgeable of bookkeeping for token distribution, mileage log and gas receipts., • Knowledge of vehicle safety and maintenance. Employee Benefits: At JWCH Institute, Inc., we believe in taking care of those who take care of others. If you work 30+ hours per week, you’ll enjoy competitive pay and a robust benefits package that includes: • Medical, Dental, Vision, • Monthly employer-sponsored allowance for assistance with health premiums., • Funded Health Savings Account (up to deductible) to assist with carrier-approved medical expenses., • Paid time off (vacation, sick leave) and 13 paid holidays., • 401(k) Safe Harbor Profit Sharing plan., • Mileage reimbursement., • Short- and long-term disability plans (LTD/STD). JWCH Institute, Inc + Wesley Health Centers is an Equal Opportunity and Fair Chance Employer.

Job DescriptionDescription: Job Summary: • Completes power washing services on scheduled cycles and/or on-demand work orders as assigned. This position requires operators to safely drive large F-550 diesel or gas powered (or comparable) vehicles with a mounted pressure washing unit, hose reels, 500+ gallon primary water tank, recovery vacuum, and 125-gallon wastewater recovery tank., • Operators are responsible for pressure washing various outdoor surfaces including bus stops, sidewalks, bus shelters, benches, trash receptacles, concrete walls and other vertical and horizontal structures. The position requires working in and around crowded areas in a safe and effective way with the ability to identify and correct conditions that might affect public and employee safety., • Be able to complete assigned work orders daily, monitor operational status of the pressure wash unit, perform minor maintenance such as checking oil, other fuel levels, check hoses and connectors prior to each use., • Follow the safety training procedures and instructions provided by the company, wear safety googles, face-shields, rubber-soled boots and other personal protective equipment (PPE) while performing pressure washing., • The operator will handle and operator pressure washing machines with high-pressure (3500-4000 psi) and extremely hot water and/or steam. The safe operation of this equipment is imperative to the safety of the public and the operator., • Must have a basic level of English comprehension, reading, speaking, and writing., • Equipment Type: F-550 diesel or gas powered (or comparable 15,000+ GWVR) vehicles with a mounted pressure washing unit, hose reels, 500+ gallon primary water tank, vacuum, and 125-gallon wastewater recovery tank., • High School Diploma or Equivalency preferred. Pressure washing experience desired but not required. Physical demands require frequent and prolonged use of hands and arms to use pressure wash gun/wand, bending, standing, and lifting 20-50 lbs. frequently throughout a normal shift. The employee must be able to work and walk around on smooth, uneven, cracked, slippery and slick surfaces (sidewalks, parking lots, walkways, etc.). Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to moderate to extreme weather (very cold and wet to very hot conditions), bicyclists and pedestrians, vehicle and bus traffic. Due to the nature of this work (pressure washing), the employee is exposed to high-pressure, hot and cold water and steam from ground-level and overhead. The employee is frequently exposed to pressure wash machine and street noise and occasionally is exposed to loud noise. These conditions can be mitigated with hearing protection equipment.

Depot Connect International (DCI).Tank/ISO Tank Container Services and Tank Trailer Parts industry.We're more than just a service provider; we're a unified team combining the expertise of industry leaders.Headquartered in Tampa, Florida, with over 160 locations worldwide, our team of over 3,500 empl

Compensation Pay Range: $16.50 - $24.50. The actual hourly rate will equal or exceed the required minimum wage applicable to the job location. Additional compensation includes annual, quarterly performance, or premiums may be paid in amounts ranging per hour in specific circumstances. Premiums may be based on schedule, facility, season, or specific work performed. Multiple premiums may apply if applicable criteria are met. The Delivery Specialist will maintain and operate store vehicles to deliver parts and/or products to professional customers in a safe and efficient manner. This position will also collect money on C.O.D. deliveries and pick up customer returns. Bilingual candidates encouraged to apply. Essential Job Functions: • Operate company vehicles to deliver parts and products to customers in a safe and efficient manner., • Ability to use delivery fleet management hand-held devices to process deliveries, capture customer signatures, update vehicle mileage, complete daily vehicle inspections, etc., • Responsible for keeping vehicles clean, maintained, and completing daily vehicle inspections prior to operating., • Responsible for keeping delivery vehicles, keys, fuel/fleet credit cards, hand-held devices, and monies collected secure at all times., • Pick up customer returns, i.e., new, warranty, cores, etc. and fill out driver return slip., • Communicate any problems or special needs from customers to store management., • Report vehicle maintenance needs, accidents, or vehicle damage to store manager immediately., • Ensure fuel tank is filled and lock and secure vehicle at end of day's business., • Clock in/out according to company policy., • Other additional duties as assigned, including customer service, sweeping, general stocking and straightening stock, merchandising, running errands, handling core returns, checking in and putting up stock orders, etc., • May occasionally assist customers, serve as a cashier, and/or help with merchandising tasks, when business dictates. (i.e.: phones, sales and service) Required: • Ability to quickly match alphanumeric sequences., • Strong interpersonal communication skills., • Ability to adapt quickly and effectively to changing delivery situations., • Driving record must meet the standard set in the company's 14/18-point record system., • Familiar with automotive parts., • Ability to operate other light store equipment. Total Compensation Package: • Competitive Wages & Paid Time Off, • Stock Purchase Plan & 401k with Employer Contributions Starting Day One, • Medical, Dental, & Vision Insurance with Optional Flexible Spending Account (FSA), • Team Member Health/Wellbeing Programs, • Tuition Educational Assistance Programs

To provide satisfying, long-term work opportunities for our dedicated employees.We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team.Our efforts will be spent towards continuously improving the health, streng

We are looking for a capable Welder who will be responsible for cutting and joining metals and other materials at our facilities or construction sites, using appropriate equipment. Minimum 5 years' experience as a Welder using Flux Core (FCAW) and Stick (SMAW).

At Jacobs, we challenge what is currently accepted, so we can shape innovative and lasting solutions for tomorrow. Through the delivery of our operations and maintenance services, you'll make it simpler and more seamless for our municipal clients to operate safely and efficiently, empowering communities to focus on what matters most to them - people. Join our advanced water treatment facility in Santa Monica, CA as the Project Manager of the Sustainable Water Infrastructure Program (SWIP). SWIP provides a drought resilient water supply for the City of Santa Monica by producing up to 1,680 acre-feet per year of advanced treated recycled water through the advanced water treatment facility, stormwater harvesting, and upgrades to the Santa Monica Urban Runoff Recycling Facility. Treatment process include membranes, cartridge filters, reverse osmosis, and ultraviolet advanced oxidation. Jacobs has a unique opportunity in the Operations and Maintenance business group for a dynamic, savvy, and highly motivated Project Manager for a new advanced water treatment facility in Santa Monica, CA. In this role, you will be responsible for the overall management including health and safety, permit compliance, process control, profit and loss, quality, and internal/external reporting. You'll also be responsible for employee supervision and management including staffing, compensation, training, performance management, and workforce development. Collaborating with other members of our team, you'll build and maintain positive business and client relationships, and be accountable for the planning, organization, operations, maintenance, and improvement of the facility. Bring your team-focus, adaptability, and commitment to excellence, and we'll help you grow what drives you - and deliver the world's most challenging Operations Management projects, together. Essential Duties & Responsibilities: * Excellent verbal and written communications, self-motivation, team-oriented work practices, strong technical problem-solving skills. * Capable of working independently and maintaining an orderly schedule. * Understanding of the technical aspects of the AWTF. * Demonstrate interpersonal relations and personnel management skills. * Experience in developing and working within an approved budget. Specifically tracking costs, adjusting activities to stay on budget, and optimizing labor and materials. * Proficiency in preparing operational reports for both internal and external purposes. * Knowledge of the laws and regulations relating to system operations. * Knowledge and ability to analyze data and maintain computer records. * Knowledge of and ability to perform standard laboratory sampling and testing. * Available for stand-by duty and emergencies as needed. * Ability to write reports, business correspondence and procedure manuals and/or SOPs. * Ability to apply mathematical operations to such tasks as chemical dosing, flow calculations, pipe or tank capacity. * Ability to define problems, collects data, establish facts, and draw valid conclusions. * Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and factual variables. * Knowledge of the principles and practices of water and/or wastewater treatment plants operations. * Proficiency with computer software including but not limited to Microsoft Office, Excel, Power Point and Outlook. * Experience working with, overseeing, and developing other employees and supervisors. * Experience with SCADA systems. * Experience with Computerized Maintenance Management Systems (CMMS). * Experience developing budgets, tracking actual expenditures vs budget and variance. * Possess a valid SWRCB Grade IV Wastewater certificate and AWT-4 Certifications. * Must have and maintain a valid CA Driver's License with no major infractions. * Ability to travel 25-percent of the time. * Ten (10) years' experience in wastewater/advanced water treatment operations or related field, including two (2) years of supervisory experience. * High School Diploma or equivalent is required. Ideally, you'll also have: Jacobs is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, medical condition, marital or domestic partner status, sexual orientation, gender, gender identity, gender expression and transgender status, mental disability or physical disability, genetic information, military or veteran status, citizenship, low-income status or any other status or characteristic protected by applicable law. Learn more about your rights under Federal EEO laws and supplemental language.

Job Description As a valued member of our team, you will be working for our well-established, medium-sized construction materials company with multiple production plants throughout California. The Ready-Mix Driver is responsible for driving a truck equipped with a concrete mixer to deliver concrete mix to job sites. The role requires the driver to operate the truck in a safe and efficient manner, following and adhering to all applicable Federal & State laws. • Paid training is available for candidates that have a Class A or B license with air brake and tank endorsements with no automatic restrictions., • Starting pay is $32.40 per hour after paid training. BENEFITS:, • PPO/HMO Health Insurance, Medical, Dental, Vision, Life, • PTO (Paid Time Off), • 401k Retirement Plan, • Overtime pay, • Direct Deposit, • Training Program, • Strong Safety Program, • Employee Assistance Program, • Employee Referral BonusEssential Functions:, • Drive truck safely and timely to location for unloading., • Drive truck under loading hopper to receive sand, gravel, cement, and water and starts mixer., • Move levers on truck to release concrete down truck chute into wheelbarrow or other conveying container or directly into area to be poured with concrete., • Perform all duties assigned by management in a timely manner., • Perform pre-trip and post-trip inspections of truck and reports repairs to personnel., • Assemble, disassemble, lift, and carry chutes., • Clean truck after delivery to prevent concrete from hardening in mixer and on truck., • Maintain a clean vehicle, always cleaning it while on duty (spray surfaces of truck with water and protective compounds for cleaning purposes), on company time., • Monitor trucks and other company equipment to ensure appearance, safety, and proper maintenance levels., • Maintain accurate work and driving records of daily activities., • Assist in yard functions, lifting materials and operating yard equipment., • Able to communicate effectively with other staff., • Able to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals. This is a full-time position. Hours of work may vary at plant or other location. Not eligible for remote work. Must be available 6 days a week and to work overtime as job duties demand. Travel Required: Yes Preferred Education and Experience • Possession of a valid unrestricted California Commercial Driver License (Group A or B) and comply with Department of Transportation regulations., • Must have Air Brake and Tanker Endorsement and a safe driving record., • Knowledge of road construction materials, road construction processes and industry. requirements. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Physical Demands and Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts, hazardous chemicals, outside weather conditions and vibration. The employee is occasionally exposed to wet and/or humid conditions, high, precarious places, fumes or airborne particles, extreme heat and risk of electrical shock and elevated noise levels. Employees must wear the required personal protective equipment; up to and including safety vest, hard hat, e r protection, gloves, and safety glasses. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit for extended periods of time. The employee frequently is required to use hands to finger, handle or feel and reach with hands and arms. The employee is regularly required to stand, walk, climb, balance, stoop, kneel, crouch, crawl, talk or hear. The employee regularly assembles, disassembles, lifts, and carries chutes that can weigh up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Individual must be able to pass a pre-employment physical and drug screen. This Organization Participates in E-VerifyEsta Organizacion Participa en E-Verify A&A Ready Mixed Concrete is an EEO/AA (equal opportunity/affirmative action) company and does not discriminate on the basis of race, color, religion, religious creed, sex, sexual orientation, gender identity or expression, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, marital or familial status, military or veteran status, or any other characteristic protected by under federal, state or local law in the programs or activities which it operates. A&A Ready Mixed Concrete es una compañía EEO/AA (igualdad de oportunidades/acción afirmativa) y no discrimina por motivos de raza, color, religión, credo religioso, sexo, orientación sexual, identidad o expresión de género, origen nacional, ascendencia, edad, condición física odiscapacidad mental, condición médica, información genética, estado civil o familiar, estado militar o de veterano, o cualquier otra característica protegida por la ley federal, estatal o local en los programas o actividades que opera.

Job DescriptionAs a valued member of our team, you will be working for our well-established, medium-sized construction materials company with multiple production plants throughout California. The Ready-Mix Driver is responsible for driving a truck equipped with a concrete mixer to deliver concrete mix to job sites. The role requires the driver to operate the truck in a safe and efficient manner, following and adhering to all applicable Federal & State laws. • Paid training is available for candidates that have a Class A or B license with air brake and tank endorsements with no automatic restrictions., • Starting pay is $31.00 per hour after paid training. TRUCK DRIVER BENEFITS:, • PPO/HMO Health Insurance, Medical, Dental, Vision, Life, • PTO (Paid Time Off), • 401k Retirement Plan, • Overtime pay, • Direct Deposit, • Training Program, • Strong Safety Program, • Employee Assistance Program, • Employee Referral BonusTRUCK DRIVER ESSENTIAL RESPONSIBILITIES AND DUTIES:, • Responsible for the safe and efficient delivery of concrete to our customers., • Responsible for maintaining the proper speed, following distance, and must be aware hazards (defensive driving)., • Thorough DOT Pre and Post trip Inspections which include raising and lowering of the hood., • Maintain driver logs and timecards within the DOT guidelines.TRUCK DRIVER QUALIFICATIONS AND REQUIREMENTS:, • Truck Driver must have a valid Class A or B commercial driver's license with Air Brake and Tanker endorsements., • Truck Driver record must not contain any reckless driving offenses, leaving the scene of an accident, DUI's, etc., • Be able to communicate effectively with customers and Dispatch, while representing the company in a professional manner. Associated Ready Mixed Concrete, Inc. is an EEO/AA (equal opportunity/affirmative action) company and does not discriminate on the basis of race, color, religion, religious creed, sex, sexual orientation, gender identity or expression, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, marital or familial status, military or veteran status, or any other characteristic protected by under federal, state or local law in the programs or activities which it operates. Associated Ready Mixed Concrete, Inc. es una compañía EEO/AA (igualdad de oportunidades/acción afirmativa) y no discrimina por motivos de raza, color, religión, credo religioso, sexo, orientación sexual, identidad o expresión de género, origen nacional, ascendencia, edad, condición física odiscapacidad mental, condición médica, información genética, estado civil o familiar, estado militar o de veterano, o cualquier otra característica protegida por la ley federal, estatal o local en los programas o actividades que opera.

Tank Outfitting Technician Role with Industry Leader / $25-$40 an hour depending on Experience / Room for Growth and Great Benefits.This Jobot Job is hosted by: Ken McClure.Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume.A leading provider of petroleum and bul

Job DescriptionDescriptionAs a Principal Weld Engineer at Impulse you will help develop, qualify and optimize welding designs and processes with both laser beam, gas tungsten arc welding, friction stir welding, and orbital tube welding. This role will integral to performing weld developments on Helios' main structural tank, Deneb’s thrust chamber and preburner assemblies, and valve components across all of our vehicles. The welding engineer in this role will interface daily with design and manufacturing engineers to make welding judgment calls and improvements and will enforce standardized practices and procedures on multiple welded assemblies. Helios is Impulse's new vehicle, a 3rd stage/kick stage. Launching in 2026, it is designed to take satellites & payloads to GEO for 1/3rd of today's current cost. Deneb is Impulse’s 15k lb thrust lox methane staged combustion engine. Responsibilities • Develop, optimize, and qualify weld processes and parameters for multiple welding processes including but not limited to: laser beam welding, friction stir welding, gas tungsten arc welding, orbital tube welding., • Work closely with design, tooling, automation, and development engineers to improve welded designs for manufacturing, • Develop and implement improved process control where possible using test and NDE results as feedback loop, • Support production operations on full scale welded assemblies, providing direction to manufacturing engineers and welders on correct techniques in a fast paced manufacturing environment, • Support on-site manufacturing and development of Helios tank, Deneb engine weldments, and Mira components., • Set up welding qualification test campaigns and interpret mechanical testing and NDE results, • Work closely with NDE personnel to interpret weld quality on development and flight hardware in addition to developing and implementing innovative state-of-the-art NDE techniques, • Set up automated welding solutions in an effort to drive process consistency, • Scope out new welding technologies that may be employed to improve rate/quality/efficiency, • Support design, manufacturing, and materials engineering with root cause analysis Minimum Qualifications • Bachelor’s degree in an engineering discipline or related field, • 10+ years of experience with hands-on fabrication, manufacturing, or testing experience of welded assemblies Preferred Skills and Experience • Master’s degree in welding engineering or related technical program, • 8+ years' of demonstrated hands-on welding experience of aluminum, nickel-based, stainless steel, titanium, and copper alloys., • 8+ years' of demonstrated experience with brazing, joining, and metallographic interpretation, • Fundamental understanding of welding processes including, but not limited to, laser beam, friction stir, gas tungsten arc, gas metal arc, electron beam, plasma arc, and resistance welding, • Robot programming experience for automated welding solutions, • Tooling design experience for welded assemblies to reduce part distortion and improve part consistency, • Understanding of weld strength testing methodologies, standards, and data acquisition systems used to make informed welding decisions (ASTM E8, E399, E740, ISO 15653, AWS D17.X, AWS C7.X, thermos-couples, strain gages, etc.), • Experience with root cause analysis and corrective actions including, but not limited to, optical and SEM fractography/metallography, hardness, chemical analysis, and mechanical testing Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Phillips Tank & Structure (PTS).Phillips Tank & Structure (PTS) is no ordinary tank construction company.We specialize in the complex and fast-paced environment of tank repair on a nationwide scale.No two tanks are alike, so when they need repair, they often pose unique or complicated technical issu

Supervisor, Production (Tank Weldment) - Weekend Shift. Supervisor, Production (Tank Weldment) - Weekend Shift. The Tank Weldment team is looking for a highly skilled supervisor who is an excellent problem solver and is able to overcome challenging circumstances on a daily basis to ensure successful

To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team.Our efforts will be spent towards continuously improving the health, stre

Job Description HMT is looking for a Foreman who is responsible for ensuring that jobs in the field are performed efficiently, safely, and in a quality manner. The Field Foreman will be responsible for site related activities, working with the Field Superintendent to ensure that jobs are being executed in an efficient manner. Essential Function • Ensure / Audit Field Progress Reports to ensure accuracy, • Certified to run and able to train employees on typical equipment found on large jobs. This would include lull, skid steer loaders, aerial equipment such as man lifts, Boom lifts, etc., • Communicate any problems with fieldwork to the Field Superintendent and assist in resolving those problems., • Communicate with the Field Superintendent regarding job schedules and performance issues that may arise., • Ensure that all HMT safety policies and procedures are being followed., • Assist with the maintenance of HMT owned equipment as needed., • Assist the Field Superintendent in identifying scope of work changes., • Coordinate communication among your team members, the customer, and subcontractors as needed., • Ensure that all QA/QC policies and procedures are being followed., • Assist with the training of employees as needed, • Responsible for the training of crew members in tank building., • Assume the site related project duties of Field Superintendent when they are scheduled for vacation or take personal time away from the job., • Work closely with all the team to promote a positive working environment., • High school diploma or equivalent., • 3+ years’ experience in the AST (Above Ground Storage Tank industry), Minimum 3 years' experience in API 650/653 repair and maintenance., • 3+ years of Supervisory experience in construction and/or industrial environments, • Must be able to weld in all positions with SMAW, FCAW, and SAW, • Detail-oriented, Excellent organizational skills, • Ability to complete all required paperwork associated with safety and QA/QC without assistance., • Ability to interpret field and fabrication drawings., • Must be DOT OQ qualified., • Must have a 3-year clean driver record, • Demonstrated ability to work independently and handle a broad scope of responsibility., • Thorough understanding of construction scheduling and cost control; comprehensive knowledge of company policies, procedures, and standards; Sound communication, organizational, supervisory, and planning skills;, • Ability to handle multiple jobs concurrently., • Maintain accurate Field Progress Reports., • Able to give clear and concise instructions to multiple employees in the execution of work., • Must have experience managing multiple crews/ job sites. The physical demands must be met by an employee to successfully perform essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform essential functions. While performing the duties of this job, the employee is regularly required to stand, walk, and use hands to finger, handle, or feel and reach with hands and arms. The employee frequently is required to walk, stoop, kneel, climb, carry, pushing/pulling and use repetitive wrist and hand movements. The employee may be required to lift and/or move objects of up to 50 pounds. Hearing and seeing ability of rapid mental coordination. It is required to be mentally alert for the entirety of shift. WORK ENVIRONMENT: This position may work in various locations within the U.S. Some locations may be subject to extreme temperatures, working in high places, etc. Potential for exposure to temperature changes, wetness, confined spaces, fumes/odors, working with ladder/scaffolds, working with pressurized equipment, high places, hazardous materials, and working alone. HMT will supply adequate training and equipment to meet the functions of the job. About HMT HMT is the global leader in aboveground storage tank solutions. HMT brings a distinct level of innovation and service to the tank industry through a unique approach of partnering with customers to optimize tank operations. Knowing that every customer’s need is different, we use our decades of experience to customize solutions that help tank operations become more efficient, more productive, and more profitable. HMT is an Equal Employment Opportunity Employer. We will not tolerate discrimination because of race, color, religion, sex, age, national origin, military or veteran status, mental or physical disability, genetic information, gender, gender identity or expression, sexual expression, or any other unlawful reason. All qualified applicants are encouraged to submit applications for employment. Employment with HMT is At-Will.

Job DescriptionJob Title: Director, Business Development & Transactions Annual Base Salary: DOE, $200,000-$250,000 along with bonus eligibility and a comprehensive benefits package Location: Los Angeles, CA Our Mission Formerly known as the Ellison Institute of Technology Los Angeles, the Ellison Medical Institute strives to spark innovation, leverage technology, and drive interdisciplinary, patient-centered research to continually enhance health, reimagine and redefine cancer care, and transform lives. Established in 2016 as a medical research and development center, the Institute features innovation labs for artificial intelligence and molecular analytics and was among the first organizations to vertically integrate the interdisciplinary study and treatment of disease. We offer multifaceted programs, including a preventative medicine and cancer clinic, cross-disciplinary research laboratories, a health policy think-tank, and community outreach and educational programs. Please visit emila.org for more details. Job Summary We are seeking an experienced Director, Business Development & Transactions to lead strategic partnering, in-licensing of external innovation, and out-licensing or co-development of internal programs from discovery through early clinical proof of concept. This is a high-impact, high-visibility role for a business development leader with strong training in biotech or pharma. You will identify, evaluate, and execute transactions that expand our pipeline, accelerate clinical development, and align with our scientific and strategic priorities. The ideal candidate is a hands-on dealmaker—equally comfortable structuring complex collaborations with global biopharma as negotiating research agreements with academic groups and early-stage companies. You will work closely with R&D, clinical, regulatory, finance, and legal teams to advance opportunities and ensure every transaction supports long-term value creation. This is an entrepreneurial role in a fast-moving environment where precision, creativity, and ownership are key. Why You Should Join Us: • Drive Transformational Growth: Lead high-value transactions that bring forward new therapies, technologies, and scientific innovations—directly shaping the Institute’s long-term trajectory., • Shape Strategic Direction: Partner closely with founders and senior executives to inform, refine, and advance enterprise-level strategy in a high-trust, highly collaborative environment., • Visibility That Accelerates Impact: Operate in a role where your decisions influence scientific, operational, and organizational outcomes—and where your expertise is recognized at the highest levels., • Autonomy With Purpose: Enjoy the latitude of a start-up environment combined with the mission-centered focus of a world-class research institute committed to improving patient lives.Job Accountabilities: Transaction Leadership • Lead structuring, negotiation, and execution of term sheets and definitive agreements for in-licensing, out-licensing, co-development, and strategic collaborations., • Develop creative deal architectures, including options-to-license, regional rights, risk-sharing structures, and co-development models., • Negotiate and finalize collaboration agreements with academic institutions, research hospitals, technology developers, and data platform partners., • Drive internal alignment across scientific, clinical, finance, and legal functions., • Present opportunities and recommendations to senior leadership and ensure seamless transition to alliance management post-deal.Strategic Sourcing & Evaluation, • Identify and evaluate external technologies, discovery platforms, and therapeutic assets aligned with Institute priorities., • Assess internal programs for partnering or out-licensing opportunities as they progress toward clinical development., • Lead and coordinate cross-functional due diligence, including scientific, clinical, regulatory, IP, and financial assessments., • Analyze market opportunities, scenarios, risks, and projected value creation.Portfolio Strategy & Analysis, • Integrate market intelligence, competitive landscape insights, and deal trend analyses to guide strategic decision-making., • Develop valuation models and financial forecasts to support business cases., • Contribute to long-range portfolio and partnership strategy with executive leadership.External Representation & Relationship Building, • Represent the Institute at partnering conferences, investor events, and scientific meetings., • Build and maintain productive relationships with biotech, pharma, venture, and academic partners., • Cultivate a broad network enabling early access to emerging technologies and scientific innovation.ADDITIONAL INFORMATION, • Required Education:, • Master’s or Ph.D. in a relevant scientific discipline (e.g., biology, chemistry, pharmacology, or related field)., • MBA strongly preferred; must demonstrate strong grounding in strategy, finance, and valuation., • Required Experience:, • 10+ years of biotech/pharma experience in business development, licensing, or corporate development., • Proven track record leading and closing in-licensing, out-licensing, and co-development transactions spanning preclinical through Phase 1-2 development., • Experience in both large/mid-cap pharma or biotech and fast-paced start-up environments strongly preferred., • Comprehensive understanding of drug discovery, translational research, clinical development, and regulatory pathways., • High scientific fluency with the ability to partner effectively with discovery, translational, and clinical leaders., • Advanced proficiency in financial modeling, valuation, deal structuring, and strategic analysis., • Required Skills:, • Strategic, entrepreneurial mindset with disciplined execution., • Ability to integrate scientific, clinical, commercial, and financial perspectives into sound business decision-making., • Strong deal leadership—able to independently drive transactions from sourcing through signed agreement., • Exceptional communication skills with executive presence and the ability to influence across functions and levels. The Ellison Medical Institute is an equal opportunity employer. We believe that an inclusive, collaborative team environment is just as important to our mission as stethoscopes and microscopes. We strive to always provide employees a supportive atmosphere, so they feel confident taking creative risks toward innovation. The Ellison Medical Institute values emotional intelligence and communication with empathy and respect for others. We seek to build a diverse group of people who are curious, have a deep sense of responsibility, and the grit needed to achieve excellence. #LI-DNP Powered by JazzHR gm4cpPwbCP

Job Description AVIATION FUEL TANKER TRUCK SENIOR DRIVER JOB (SANTA FE SPRINGS (LOS ANGELES), CA) We are looking for local and regional fuel transport drivers to join our small, “family first” company, who are committed to getting the job done safely and efficiently. This full-time position features local and regional driving opportunities primarily within 350-400 miles of Santa Fe Springs (Los Angeles), CA. Humboldt Pacific LLC is a fuel transport company that safely transports bulk fuel (Jet A, JP8, AVGAS & Kerosene) and other petroleum commodities throughout California, Nevada, Idaho, Washington, Oregon, Arizona and Utah. Our focus is in the transportation of bulk aviation fuels, however, we also specialize transport a variety of other petroleum-based products such as Jet Fuel, Renewable Fuels, Marine Gas Oil, Ethanol, Diesel Exhaust Fluid (DEF), Biodiesel, Red Dye Off-road Diesel, AV Gas, Clear Diesel Fuel, Bunker Fuel, Gasoline, Heating Oils and Bulk Oils to commercial and private airports, aviation emergency response, agriculture and logging aviation, cardlocks, C-stores and military bases. Category: Operatives: CDL-A Petroleum Tanker transport of product in a safe, responsible manner and in accordance with company policy and applicable State & Federal regulations. Department: Operations Shift: Varies Location: Santa Fe Springs (LA), CA Job Type: Full Time - Day Shift, Monday-Friday Education: High School Equivalent or Higher Pay Rate: Hourly | Non-Exempt | $27 (Training, avg. 3-6 weeks) then $33 Per Hour DOE + Overtime Over 40 Hours/Week + Paid Vacation, Health and 401k Benefits Duration: Full-time Permanent | 90 Day Probationary Period Applies Travel: Yes Job Description: SUMMARY The Petroleum Product Tanker Driver's responsibilities include safe product handling, product quality assurance, and product transportation consistent with regulatory compliance and Company operating goals. The Petroleum Product Tanker Driver is responsible for the pick-up and the drop-off of a specified liquid or gas. The driver must keep the truck properly maintained and must follow all safe driving regulations. WE OFFER: • Competitive Compensation with Attractive Annual Earnings DOE, • We Pay Our Drivers Overtime!, • Petroleum Driver Training Program, • Paid Vacation, • Comprehensive Health Insurance Plan, • Comprehensive Vision Insurance Plan, • Comprehensive Dental Insurance Plan, • Life Insurance Plan, • 401k Savings Program, • Employee Recognition Bonus Program, • Transports deliveries in a safe, responsible manner and in accordance with company policy and applicable State & Federal regulations., • Applies knowledge and abilities to safely load and unload deliveries according to the capacity of the load and content description., • Processes and maintains proper delivery authorization and pickup documentation and submits in a timely manner., • Maintains communication with dispatch as to any delays or issues during route/shift., • Provides good customer service and maintains a professional manner and appearance to enhance the company’s image., • Performs a daily DOT pre-trip and post-trip inspection checklist, informing maintenance personnel of any issues., • Maintains a daily, legible DOT log book and submits logbooks as required by company policy. Maintains vehicle in a neat and tidy manner., • Reports all accidents/damages/malfunctions immediately to management as per company policy and procedure., • Must hold a valid Class A CDL with TWIC, HAZMAT, and Tank Endorsement, • Senior driver considered after 5th year of tanker driving experience, • Minimum of 24 months commercial driving experience, • No more than 2 major moving violations within a 3 year period, • No more than 2 accidents within a 3 year period, • DOT Drug Screening required, • No Felony convictions, • No DUI's/ DWI's within the last 7 years, • No positive or refused drug or alcohol tests, • Current Medical Examiner's Certificate, • Must be 23 Years of age or older, • Ability to conduct all operations in a safe manner, • Must be legally authorized to work in the U.S. on a regular, full-time basis without restrictions, • Must be able to perform repetitive motion activities throughout the day, • Requires getting into and out of the truck frequently, • Must be able to lift and/or move 75 lbs on a regular basis, • Must be able to work 10-12 hours per day, 5 days/week, • Drug and Alcohol screening required, • While performing the duties of this job, the employee will be regularly exposed to work near moving mechanical parts., • The employee must able to sit for an average of 65-75% of working hours, • The employee will be regularly exposed to very dusty and noisy conditions, • The employee will be exposed to outdoor weather conditions, • The employee may be exposed to chemicals used in the process EQUAL OPPORTUNITY EMPLOYER (EOE) STATEMENT We value the diverse backgrounds of our people. At Humboldt Pacific, LLC we work to create an open atmosphere of trust, honesty and respect. Harassment or discrimination of any kind – including that involving race, color, religion, gender, age, national origin, citizenship, mental or physical disabilities, sexual orientation, veteran status, or any other similarly protected status – is unacceptable. This principle applies to all aspects of employment, including recruitment, hiring, placement, transfer, promotion, layoff, recall, termination, and other terms and conditions of employment. We recruit, process and assign all applicants on the basis of their qualifications for the particular job, and we do so without regard to any factor unrelated to their ability to fulfill job requirements. Humboldt Pacific, LLC will only accept customer requests for temporary or permanent help that meets our standards. To comply with applicable laws and ensure equal employment opportunities to qualified individuals with a disability, we will make reasonable accommodations for the known physical or mental limitations of an otherwise qualified individual with a disability who is an applicant or an employee, unless undue hardship would result. Our company further recognizes that the effective application of a policy of merit employment involves more than just policy statement and will, therefore, Humboldt Pacific, LLC undertakes a program of affirmative action to make known that equal employment opportunities are available on the basis of individual merit and to encourage all persons to seek employment with our company and to strive for advancement on this basis. Powered by JazzHR VPIDf8Q6KH

Job Description Title: QA Tech I -1st shift Department: Quality Location: Irwindale, CA Shift: 1st shift Pay rate: $20.50 an hour Reports to: QA Lead Position Summary: The QA Tech 1 is a key Quality Assurance role within the plant and supports QA team leads in safeguarding compliance with food safety and quality requirements. As a QA Tech 1 at Bonduelle Fresh Americas (“BFA”), you will embrace our vision of Giving People the Freedom to Eat HealthierTM through excellence and daily performance of essential quality assurance functions, including finished goods checks and sampling for PCT testing (Hold & Release products). What if your job had a real impact? By joining Bonduelle, the world leader in ready-to-use plant-based food, you are deciding to make a positive and sustainable impact on yourself, others and the planet. You will play an active part in our mission: "inspire the transition toward a plant-based diet to contribute to people's well being and planet health". Bonduelle is a family-run company of 14,600 people which provides over 100 countries with vegetables. Well established in the United States, our business unit includes 4 production facilities with more than 3,200 associates. We process fresh vegetables, salads and meal solutions with our own brands: Ready Pac Foods® and Bistro®. Join us at Bonduelle to start an adventure where people come first and contribute to a better future through plant-based food! Bonduelle Fresh Americas is a Certified B Corp for a better life. Bonduelle chose B Corporation because of its comprehensive and rigorous standards and its ability to measure a company’s governance as well as worker, community, and environmental impact.We aim to make a positive impact on People, Planet and Food, as seen in our global B!Pact objectives. B Corp certification validates our positive impact and tells the world we are part of a community using business as a force for good. Key Responsibilities: • Ensure compliance with and maintain all GMP/PPE/Safety, HACCP & Sanitation guidelines and processes., • Understand and implement requirements for product sampling and sample product following PCT sampling procedures established by the customer and corporate QA., • Sample finished product for Hold & Release PCT sampling as required by customers; prepares logs and submits samples for Hold & Release tests., • Conduct seal integrity tests on finished products and ensure PMOs/SMOs perform equipment adjustments as needed to ensure 100% compliance with seal integrity., • Identify any and all non-conformances, document and report it to the PMO/SMO and production leads for immediate follow-up; correct abnormalities and restore functioning where needed., • Clean and/or fill-up the Haug tank at the start of every shift and maintain tank water level and cleanliness throughout the shift., • Log leaks, non-conformances and sample submissions in the QA database., • Strong attention to detail., • Ability to read, write and speak English; comprehension of basic math., • Basic computer skills and ability to multitask., • Willingness and flexibility to work in a cold, wet, fast-paced, 24 hour plant environment., • Ability to lift up to 50 pounds, ability to climb stairs numerous times a day., • Ability to work independently and in a team environment. While performing the duties of this job, this position entails use of ladders and catwalks to reach production equipment, regularly works near moving mechanical parts and is regularly exposed to extreme cold for extended periods of time. The associate frequently works in high, precarious places. The associate is occasionally exposed to wet and/or humid conditions, fumes or airborne particles, toxic or caustic chemicals, and risk of electrical shock. The noise level in the work environment is usually loud.

Job DescriptionDescriptionAs a Manufacturing Engineer for Tank Weldments at Impulse, you will be responsible for building the primary pressure boundary for Impulse’s new “Helios” kick-stage vehicle. This is a technical role in a development heavy environment, requiring execution on aggressive timelines and rapid design iterations. The manufacturing engineer is expected to own design for manufacturability of their hardware and development of the manufacturing process. Responsibilities • Own the entire manufacturing life cycle for assigned projects & hardware, • Own selection of manufacturing processes during the hardware design phase. Identify manufacturing options to inform design. Own requirements associated with the manufacturing process., • Provide subject matter expertise on primary structure manufacturing processes including fusion welding, solid state welding, raw material processing, machining, non-destructive examination, and mechanical joining processes. Participate in design trades and sign off on key decisions on how hardware is made., • Design, build and activate factory production cells. Own factory layouts including material movement, build process flows, lifting and rigging solutions, and facilities requirements, • Optimize and accelerate existing manufacturing processes for tank integration & supporting structures, • Work directly with machinists, welders & technicians to produce hardware that meets all technical requirements. Ideate and execute on projects to improve the technicians’ experience and provide design for manufacturability feedback based on technician feedback., • Provide technical guidance to outside vendors and support supply chain development, • Update designs, manufacturing processes, and documentation to support continuous improvement, • Bachelor's degree in an engineering discipline, or related field, • Demonstrate experience in developing manufacturing processes, • Experience working in a hardware development environment, • 2+ years of demonstrated hands-on manufacturing experience, • Proficiency with CAD software and the ability to learn new tools, • Masters' degree in an engineering discipline, • 6+ years' of demonstrated hands-on manufacturing experience within aerospace or related industry working with metallics structures, • Previous experience working within a start-up, • 4+ years' of demonstrated experience with welding (laser, friction stir weld, TIG, etc.), • Prior experience with spacecraft, aircraft, or automotive composite part design and fabrication, • Experience working on a launch vehicle or satellite development effort, • Ability to work in a fast paced, autonomously driven, and demanding atmosphere Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescriptionAs a Senior Manufacturing Engineer, you will own all aspects of manufacturing spacecraft chassis & aluminum panels, set up machining cells, and iterate products from development test articles to high volume production. Impulse is building an exceptional team and this position is a growth opportunity open to high performers of any experience level above the basic qualifications (Staff, Principal, etc.). Responsibilities • Own all aspects of spacecraft component manufacturing from product inception and iteration to volume production (i.e. tank skins, vehicle structures, large & thin aluminum hardware), • Work with various CAM software (i.e. NX MasterCam) and strong ability to learn and become expert in new software rapidly, • Install advanced CNC machining work centers and develop processes for prototype, test and flight hardware, • Work with the design and development teams to iterate designs for manufacturability and produce highly reliable, cost-efficient components, • Resolve technical issues with innovative and resourceful solutions, • Bachelor’s degree in engineering, science or related field, • 5+ year(s) of experience with CNC machines and various CAM packages (HSM Works, Fusion 360, ESPRIT, Hypermill, etc.), • 5+ year(s) of experience in a design, test, manufacturing, or production environment, • Experience on 5-axis mills and/or routers, • Experience on manual and CNC mills and/or lathes, • Ability to rapidly pick up new CAM software and manage large tool libraries, • 7+ years of demonstrated experience with CNC machines and various CAM packages (HSM Works, Fusion 360, ESPRIT, Hypermill, etc.), • 5+ years of demonstrated experience programming machining for spacecraft components (structures), experience programming in MAX-PAC, • Excited to setup, work on and manufacture hardware on the shop floor. Develop production processes from the ground up including driving design improvements for manufacturing, • Self-starter able to identify problems and implement solutions with limited supervision, • Experience on various machines and OEM software including Heidenhain, Okuma OSP, Siemens, Fanuc, etc., • Experience setting up machine shops, recommending and evaluating capital for purchase, • Extremely hands on. Experience with fabrication tools and processes (electric/pneumatic power tools, manual lathes/mills, calipers, welding equipment, etc.), • Familiarity with CAD software (NX or equivalent), geometric dimensioning and tolerancing (GD&T) and work holding design and analysis Prior experience working in a fast-paced agile product development environment, • Flexible schedule and willing to travel as needed, • Python / SQL programming experience or similar, • High attention to detail and rapid pace of executionAdditional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description HMT, LLC has an immediate opening for an, Assistant Tank Foreman. In this role, you would be responsible for directing personnel in the safe execution of the site-specific scope of work items outlined in the contract documents. Must be able to follow written instructions as well as follow verbal directions as required to perform duties and responsibilities as listed below. Heavy lifting will often be required to perform tasks. Must be able to kneel, squat, and climb. Must be able to perform required duties for extended periods of time inside confined spaces, often with breathing equipment required. Must be able to tolerate extreme weather conditions for extended periods of time. Essential Duties and Responsibilities: • Ensure that all employees are working in a safe manner and environment. Assistant Tank Foreman are to fulfill all requirements outlined in the HMT Safety Manual, site specific requirements, and customer specific requirements., • Work well with the Tank Foreman to understand the scope of work and bring to their attention any potential problems and issues. Communication with the Tank Foreman should continue on a regular basis., • Ensure that all HMT and customer specifications, guidelines, and programs are being followed and documented as required., • Responsible for supporting the Tank Foreman on managing the field crew in the performance of daily tasks., • Ensure that work is being performed efficiently with regard to manpower, equipment, tools and consumables., • Responsible for compliance with all QA/QC requirements including contract drawings and specifications., • Complete all general site paperwork including timesheets, T&M sheets, and purchase orders., • Responsible for onsite customer relations., • Red-line construction drawings as required for approved scope changes. Provide sketches of existing customer equipment associated with our scope (platform connections, ladders, catwalks, and any piping)., • Complete any required HMT Data Sheets (roof drain systems, suctions, seal data, etc.)., • Responsible for the training of crew members in the art of tank building and supporting the Field Tank Foreman are expected to train prospective employees to become Field Foreman., • Must maintain a positive attitude with crew members., • Must have a minimum of 2 years of heavy steel industry work experience, preferably in in the AST industry space (Above Ground Storage Tank industry), • Detail-oriented, Excellent organizational skills, • Ability to handle multiple jobs concurrently (ability to help support management up to 15 employees)., • Maintain accurate Field Progress Reports., • Able to give clear and concise instructions to multiple employees in the execution of work. Ability to complete all required paperwork associated with safety and QA/QC without assistance., • Possess knowledge of automatic welding and burning equipment. This would include the ability to run, repair, and train others in the use and operation of this type of equipment., • Ability to interpret field and fabrication drawings. The physical demands must be met by an employee to successfully perform essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform essential functions. While performing the duties of this job, the employee is regularly required to stand, walk and use hands to finger, handle, or feel and reach with hands and arms. The employee frequently is required to walk, stoop, kneel, climbing, carry, pushing/pulling and use repetitive wrist and hand movements. The employee may be required to lift and/or move objects of up to 50 pounds. Hearing, seeing ability of rapid mental coordination. It is required to be mentally alert for entire regular shift. This position may work in various locations within the U.S. Some locations may be subject to extreme temperatures, working in high places, etc. Potential for exposure to temperature changes, wetness, confined spaces, fumes/odors, working with ladder/scaffolds, working with pressurized equipment, high places, hazardous materials, and working alone. HMT will supply adequate training and equipment to meet the functions of the job. About HMT HMT is the global leader in aboveground storage tank solutions. HMT brings a distinct level of innovation and service to the tank industry through a unique approach of partnering with customers to optimize tank operations. Knowing that every customer’s need is different, we use our decades of experience to customize solutions that help tank operations become more efficient, more productive, and more profitable. HMT is an Equal Employment Opportunity Employer. We will not tolerate discrimination because of race, color, religion, sex, age, national origin, military or veteran status, mental or physical disability, genetic information, gender, gender identity or expression, sexual expression, or any other unlawful reason. All qualified applicants are encouraged to submit applications for employment. Employment with HMT is At-Will.

Job DescriptionJob Title: Clinical Associate II Hourly Rate: DOE, $28.00-$37.00 along with bonus eligibility and a comprehensive benefits package Location: Los Angeles, CA Our Mission Formerly known as the Ellison Institute of Technology Los Angeles, the Ellison Medical Institute strives to spark innovation, leverage technology, and drive interdisciplinary, patient-centered research to continually enhance health, reimagine and redefine cancer care, and transform lives. Established in 2016 as a medical research and development center, the Institute features innovation labs for artificial intelligence and molecular analytics and was among the first organizations to vertically integrate the interdisciplinary study and treatment of disease. We offer multifaceted programs, including a preventative medicine and cancer clinic, cross-disciplinary research laboratories, a health policy think-tank, and community outreach and educational programs. Please visit emila.org for more details. Job Summary The Ellison Medical Institute is seeking a reliable and detailed-oriented front office administrator to join its Oncology and Preventative Health clinic. The Clinical Associate II is a key member of the clinic, responsible for supporting efficient, accurate, and well-coordinated front office operations within the clinic. This position performs advanced administrative duties and oversees specialized coordination tasks to ensure seamless patient experience and smooth clinic workflow. Responsibilities include managing complex referral processes for imaging, procedures, and specialty services, submitting prior authorizations, maintaining essential patient tracking systems, and upholding clear communication with patients throughout the process. In addition, the Clinical Associate II assists with maintaining accurate clinic documentation and supports staffing training to promote consistency, compliance, and adherence to established procedures. Why Join Us: • Mission-Driven Impact: Join a collaborative oncology and preventative medicine team where clinical care, research, and a broad range of other disciplines come together to continually enhance health, reimagine and redefine cancer care, and transform lives., • Patient Experience: Help create a seamless, supportive experience for patients by streamlining processes and guiding patients through referrals, helping make healthcare more accessible, efficient, and compassionate., • Referral & Authorization Coordination: Coordinate referrals for imaging, procedures, and specialty services, including initiating requests, scheduling, and tracking referrals through completion. Submit and monitor prior authorization requests, ensuring required clinical documentation is complete, and communicate authorization determinations promptly to patients, providers, and external facilities., • New Patient Referrals & Registration: Process incoming patient referrals, including registration, insurance verification, and accurate demographic entry. Obtain any required authorizations and medical records prior to appointment., • Medical Records Management: Receive, review, and upload medical records for new and established patients, ensuring accuracy and completeness within the electronic health record (EHR). Serve as the primary contact for medical record requests and coordinate processing and tracking with Providence as appropriate., • Front Office Operations & Patient Support: Support daily clinic operations by managing phone and electronic communications and providing front desk coverage as needed. Prepare self-pay estimates and maintain office supply inventory to support efficient clinic flow., • Required Education: High School Diploma / GED required; Associate’s Degree preferred., • Required Experience: A minimum of 2 years of experience in a medical front office or outpatient clinical setting is required. Relevant experience should include scheduling appointments, processing referrals and authorizations, working with electronic health record (EHR) systems, and performing administrative duties in support of patient care.Required Skills & Experience:, • Strong verbal and written communication skills., • Excellent organizational skills and attention to detail for accurate maintenance of patient records and communications., • Proficiency in electronic health records (EHR) systems and office software, including Microsoft Office Suite and Outlook., • Critical thinking and problem-solving skills., • Knowledge of and adherence to privacy regulations, including HIPAA., • Ability to maintain discretion and confidentiality., • Effective time management to handle multiple tasks and prioritize responsibilities., • Attention to compliance and regulatory requirements., • Patience and empathy in addressing patient inquiries and concerns. The Ellison Medical Institute is an equal opportunity employer. We believe that an inclusive, collaborative team environment is just as important to our mission as stethoscopes and microscopes. We strive to always provide employees a supportive atmosphere, so they feel confident taking creative risks toward innovation. The Ellison Medical Institute values emotional intelligence and communication with empathy and respect for others. We seek to build a diverse group of people who are curious, have a deep sense of responsibility, and the grit needed to achieve excellence. #LI-DNP Powered by JazzHR SNbGRPavuT

Job Description We are a family-owned bulk petroleum transportation company located in Southern California, seeking highly professional CDL (Class A) Hazmat Fuel Tanker Drivers to join our growing fleet. Our drivers are responsible for delivering various petroleum products to our customers in a safe, efficient, and timely manner. We provide best-in-class trucks and equipment and are looking for motivated professionals to help us grow. We pride ourselves on staying ahead of the curve with state-of-the-art technology and a commitment to our core values of "Integrity Delivered." If you love working independently and thrive on the road, this position is right for you! Responsibilities • Load and make deliveries in accordance with company and legal guidelines, including proper use of safety equipment and following established procedures., • Perform required pre and post-trip inspections., • Maintain detailed driving and delivery logs., • Utilize onboard electronics, including ELDs., • Navigate Southern California geography and freeway systems., • Route around traffic and hazards utilizing maps and/or GPS., • Maintain vehicle cleanliness and other related equipment as necessary., • Promote company Core Values and Integrity., • Work additional varying hours, which may include weekends, holidays, and overtime. Qualifications • Must possess and maintain a valid Class A driver's license in the state of residence with Tanker and Hazardous Materials (X) endorsements., • Minimum of 36 months recent and verifiable commercial vehicle experience., • Experience driving trucks totaling gross vehicle weight (GVW) over 26,000 pounds., • Must be able to pass pre-employment physical, background screening, and drug/alcohol test., • Current medical certificate, with no restrictions or limitations., • Must be able to pass our road test with a vehicle chosen by the company., • Must be able to acquire and maintain loading privileges at all Southern California terminals., • Ability to lift up to 35 pounds., • Adherence to California labor laws (meal and rest breaks)., • TWIC (Transportation Worker's Identification Credential) preferred but not required., • Experience in petroleum transportation highly preferred. Compensation $29.00- $41.00 per hour (depending on years of service and additional premiums for weekend work.) Benefits • Home every day with a great working environment., • Assigned best-in-class equipment with both truck and trailer or semi available., • Industry-leading hourly pay with overtime., • Employer contribution for Medical insurance (BlueShield HMO, PPO, and Kaiser)., • Dental, Vision, and Aflac Insurance are available., • Paid Vacation Time and Holiday Pay offered., • 401k plan with generous employer match. Equal Opportunity Opportunity MJ Tank Lines is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, or any other characteristic protected by law. Recruiter Notice Please note: MJ Tank Lines does not accept unsolicited resumes or calls from staffing agencies or recruiters. Powered by JazzHR gQHXvTHvgX

Job Description AVIATION FUEL TANKER TRUCK SENIOR DRIVER JOB (SANTA FE SPRINGS (LOS ANGELES), CA) We are looking for local and regional fuel transport drivers to join our small, “family first” company, who are committed to getting the job done safely and efficiently. This full-time position features local and regional driving opportunities primarily within 350-400 miles of Santa Fe Springs (Los Angeles), CA. Humboldt Pacific LLC is a fuel transport company that safely transports bulk fuel (Jet A, JP8, AVGAS & Kerosene) and other petroleum commodities throughout California, Nevada, Idaho, Washington, Oregon, Arizona and Utah. Our focus is in the transportation of bulk aviation fuels, however, we also specialize transport a variety of other petroleum-based products such as Jet Fuel, Renewable Fuels, Marine Gas Oil, Ethanol, Diesel Exhaust Fluid (DEF), Biodiesel, Red Dye Off-road Diesel, AV Gas, Clear Diesel Fuel, Bunker Fuel, Gasoline, Heating Oils and Bulk Oils to commercial and private airports, aviation emergency response, agriculture and logging aviation, cardlocks, C-stores and military bases. Category: Operatives: CDL-A Petroleum Tanker transport of product in a safe, responsible manner and in accordance with company policy and applicable State & Federal regulations. Department: Operations Shift: Varies Location: Santa Fe Springs (LA), CA Job Type: Full Time - Night Driver, Sunday-Thursday Education: High School Equivalent or Higher Pay Rate: Hourly | Non-Exempt | $27 (Training, avg. 3-6 weeks) then $33 Per Hour DOE + Overtime Over 40 Hours/Week + Paid Vacation, Health and 401k Benefits Duration: Full-time Permanent | 90 Day Probationary Period Applies Travel: Yes Job Description: SUMMARY The Petroleum Product Tanker Driver's responsibilities include safe product handling, product quality assurance, and product transportation consistent with regulatory compliance and Company operating goals. The Petroleum Product Tanker Driver is responsible for the pick-up and the drop-off of a specified liquid or gas. The driver must keep the truck properly maintained and must follow all safe driving regulations. WE OFFER: • Competitive Compensation with Attractive Annual Earnings DOE, • We Pay Our Drivers Overtime!, • Petroleum Driver Training Program, • Paid Vacation, • Comprehensive Health Insurance Plan, • Comprehensive Vision Insurance Plan, • Comprehensive Dental Insurance Plan, • Life Insurance Plan, • 401k Savings Program, • Employee Recognition Bonus Program, • Transports deliveries in a safe, responsible manner and in accordance with company policy and applicable State & Federal regulations., • Applies knowledge and abilities to safely load and unload deliveries according to the capacity of the load and content description., • Processes and maintains proper delivery authorization and pickup documentation and submits in a timely manner., • Maintains communication with dispatch as to any delays or issues during route/shift., • Provides good customer service and maintains a professional manner and appearance to enhance the company’s image., • Performs a daily DOT pre-trip and post-trip inspection checklist, informing maintenance personnel of any issues., • Maintains a daily, legible DOT log book and submits logbooks as required by company policy. Maintains vehicle in a neat and tidy manner., • Reports all accidents/damages/malfunctions immediately to management as per company policy and procedure., • Must hold a valid Class A CDL with TWIC, HAZMAT, and Tank Endorsement, • Senior driver considered after 5th year of tanker driving experience, • Minimum of 24 months commercial driving experience, • No more than 2 major moving violations within a 3 year period, • No more than 2 accidents within a 3 year period, • DOT Drug Screening required, • No Felony convictions, • No DUI's/ DWI's within the last 7 years, • No positive or refused drug or alcohol tests, • Current Medical Examiner's Certificate, • Must be 23 Years of age or older, • Ability to conduct all operations in a safe manner, • Must be legally authorized to work in the U.S. on a regular, full-time basis without restrictions, • Must be able to perform repetitive motion activities throughout the day, • Requires getting into and out of the truck frequently, • Must be able to lift and/or move 75 lbs on a regular basis, • Must be able to work 10-12 hours per day, 5 days/week, • Drug and Alcohol screening required, • While performing the duties of this job, the employee will be regularly exposed to work near moving mechanical parts., • The employee must able to sit for an average of 65-75% of working hours, • The employee will be regularly exposed to very dusty and noisy conditions, • The employee will be exposed to outdoor weather conditions, • The employee may be exposed to chemicals used in the process EQUAL OPPORTUNITY EMPLOYER (EOE) STATEMENT We value the diverse backgrounds of our people. At Humboldt Pacific, LLC we work to create an open atmosphere of trust, honesty and respect. Harassment or discrimination of any kind – including that involving race, color, religion, gender, age, national origin, citizenship, mental or physical disabilities, sexual orientation, veteran status, or any other similarly protected status – is unacceptable. This principle applies to all aspects of employment, including recruitment, hiring, placement, transfer, promotion, layoff, recall, termination, and other terms and conditions of employment. We recruit, process and assign all applicants on the basis of their qualifications for the particular job, and we do so without regard to any factor unrelated to their ability to fulfill job requirements. Humboldt Pacific, LLC will only accept customer requests for temporary or permanent help that meets our standards. To comply with applicable laws and ensure equal employment opportunities to qualified individuals with a disability, we will make reasonable accommodations for the known physical or mental limitations of an otherwise qualified individual with a disability who is an applicant or an employee, unless undue hardship would result. Our company further recognizes that the effective application of a policy of merit employment involves more than just policy statement and will, therefore, Humboldt Pacific, LLC undertakes a program of affirmative action to make known that equal employment opportunities are available on the basis of individual merit and to encourage all persons to seek employment with our company and to strive for advancement on this basis. Powered by JazzHR l0hwEjFyeJ

Job DescriptionDescriptionAs a Senior Propulsion Analyst (Fluids) at Impulse, your core responsibility will be to analyze and create clean sheet designs of spacecraft propulsion fluids systems and components. Responsibilities • Perform and document fluids and thermal analyses of liquid propellant rocket engine, tanks and feed systems., • Size propellant management devices (PMDs), baffles and/or screens with industry standard equations and techniques, • Perform CFD analysis of internal flow geometries, • Perform analysis of propellant tank phenomenon including: zero- and micro-gravity fluid management, propellant slosh and propellant mass gauging, • Assist with validation testing of internal tank propellant management devices (baffles, AVDs, bubble point screens, etc), • Ensure model predictions are grounded through a practical hands-on approach, • Contribute to developing analysis processes and tools to be used company wide. Achieve buy-in with key stakeholders and provide training for general use, • B.S. degree in Mechanical, Aerospace, or a comparable field, • 4+ years of demonstrated experience with fluid/thermal analysis on liquid propellant rocket engines, rocket stages, spacecraft or similar high-performance systems, • 4+ years of professional experience in fluid analysis with commercial software (e.g. Fluent, CFX, SINDA/FLUINT,) and hand-calc methods, • Advanced degree in Mechanical, Aerospace, or a comparable field, • Experience working in fast-paced, startup environment, • Strong fundamentals in compressible & incompressible fluid mechanics and heat-transfer, including hand calculation methods, • Advanced proficiency with a commercial CFD tool through all stages of the workflow (geometry prep, mesh generation, setup, convergence, post-processing), • Familiarity with ANSYS CFX, ANSYS Fluent, and/or Star-CCM+, • Familiarity with multi-phase fluid modeling and acceleration dominated fluid dynamics, • Experience with anchoring CFD analysis to test or flight data, • Experience with waterhammer and fluid network modeling (SINDA/FLUINT or other similar tools), • Programing experience for creating analysis tools or performing hand-calcs. Python preferred. Matlab or other high-level languages acceptable, • Experience in root-cause analysis, • Excellent verbal and written communication skills Additional Requirements:, • Flexible schedule and willing to travel as needed Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: • Our people are our #1 priority., • Teamwork is the best way to solve problems., • Safety is critical. Everyone is responsible for creating a safe work environment., • We strive to find new and better ways of doing things every day., • Clear expectations and directions are always given., • Frequent coaching and support lead to great performers and high quality for our customers., • A manager's job is to set each employee up for success every day., • We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. • Acts as point of contact with customer, vendors and subcontractors on site., • Works to maintain Safety, Quality and Productivity., • Provides leadership regarding Safety on the jobsite. Fosters a Safety Culture within the crew., • Enhances field productivity. Consistently perform projects under budget and on time., • Assists Construction Managers and HR in recruiting field workers., • Represents PTS in a professional, positive light to customers and employees., • Provides a positive contribution to pre-construction planning effort., • Communicates well with the support staff (i.e. Design, Purchasing, PM, Admin), • Completes all necessary paperwork i.e. – daily time sheets, safety and quality audits, customer required paperwork, equipment inspections etc. Requirements • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development., • Paid Time Off (accruing immediately), • You’ll be part of a team where YOU matter Powered by JazzHR 7JAvPz2BJJ

Job DescriptionDescription: Scope of Work: The Biomedical Technician is responsible for overseeing the overall operational condition, maintenance and repair of all water treatment equipment, all medical equipment and mechanical/electrical systems to ensure patient safety and the safety of all staff operating such equipment for their assigned clinic(s). Responsibilities and Expectations: · Demonstrates effective use of supplies and staff labor hours · Assist with purchasing as needed; place orders, perform weekly and month end inventory counts · Be familiar with the overall procedures used in inventory control and assist in the documentation and control of excess inventory · Perform duties as assigned to meet the patient care and/or operational needs of the facility · Troubleshoot, repair and maintain equipment as recommended by the manufacturer · Repair, calibrate, test, clean and disinfect dialysis machines, water distribution loop and RO’s according to protocol · Perform water quality checks to include but not limited to; free chlorine, total chlorine, and water hardness testing · Perform safety checks and test on all pre-treatment water equipment including but not limited to carbon tanks, water softeners, RO units, UV lamps and ultra filters · Collect samples of RO water and dialysate for microbiology testing according to protocol · Collect water samples for AAMI analysis testing according to protocol · Disinfection of central bicarbonate systems and mixing tank according to protocol · Disinfection of RO, distribution system, and hemodialysis machines according to protocol · Perform duties at all times within limitations established by and in accordance with company policy and procedures, applicable state and federal laws and regulations · Assist with program’s target goals for patient outcomes in accordance with quality patient care and company goals · Attend and participate in monthly Quality Assessment and Performance Improvement (QAPI) meetings · Use appropriate safety measures including personal protective equipment (PPE) as necessary · Be familiar with emergency equipment and all emergency operational measures · Participate in staff meetings as required. Attend in-services and continuing education sessions in compliance with company policy and procedure · Assist with staff training as requested · Participate in team concepts and promote a team effort, perform duties in accordance with company policies and procedures · All other duties as assigned Physical Demands and Working Conditions: The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. · The position regularly involves heavy lifting, moving of patients and assisting with ambulation. Equipment aids and/or coworkers may provide assistance · This position requires frequent, prolonged periods of standing and the employee must be able to bend over · The employee may occasionally be required to move, with assistance, machines and equipment of up to 200 lbs., and may lift chemical and water solutions of up to 50lbs. as high as 5 feet · The work environment is characteristic of a health care facility with air temperature control and moderate noise levels · May be exposed to infectious and contagious diseases/materials · May be required to wear protective gear for extended periods of time. · Day to day work includes desk work, computer work, interaction with patients, facility/hospital staff and physicians · The position may require travel to training sites or other facilities. · May be asked to provide essential functions of this position in other locations with the same physical demands and working conditions as described above. Requirements: Position Requirements: · High school diploma or equivalent · Valid driver’s license in relevant state. License must be kept as current, without restrictions and good driving records · Previous dialysis, hospital, or medical experience preferred · Confirmation of ability to differentiate all primary colors · Ability to react and perform under stress and in emergency conditions · Ability to communicate and work effectively with others · Ability to work independently as well as with others to plan and organize work assignments · Demonstrated working knowledge of the English language and ability to communicate in writing as well as verbally · Must have basic computer skills; proficiency in all NRC clinical applications required within 90 days of hire · Must be able to organize time and tasks well · Ability to meet minimum hospital/agency hiring standards which may include additional background clearances and orientation requirements if applicable to the program assigned to for employment

Job DescriptionJob Title: Senior AI Peptide and Protein Design Engineer Annual Base Salary: DOE, $160,000-$213,000 along with bonus eligibility and a comprehensive benefits package Location: Los Angeles, CA Our Mission Formerly known as the Ellison Institute of Technology Los Angeles, the Ellison Medical Institute strives to spark innovation, leverage technology, and drive interdisciplinary, patient-centered research to continually enhance health, reimagine and redefine cancer care, and transform lives. Established in 2016 as a medical research and development center, the Institute features innovation labs for artificial intelligence and molecular analytics and was among the first organizations to vertically integrate the interdisciplinary study and treatment of disease. We offer multifaceted programs, including a preventative medicine and cancer clinic, cross-disciplinary research laboratories, a health policy think-tank, and community outreach and educational programs. Please visit emila.org for more details. Job Summary The Ellison Medical Institute is launching a strategic new initiative in de novo peptide and protein engineering to advance the design and delivery of next-generation therapeutics. This effort represents a deliberate expansion of the organization’s capabilities and will establish a strong foundation in AI-driven peptide and protein engineering. The successful candidate will play a central role in shaping core tools, workflows, and technical direction, while working closely with experts in peptide and protein design who are deeply engaged in the program. The Senior AI Peptide and Protein Design Engineer role offers the opportunity to influence the initiative from its inception with strong scientific partnership and institutional support. Candidates with strong peptide and protein design backgrounds are encouraged to apply. Why You Should Join Us: • Build a Foundational Capability: Help establish and scale core AI-driven peptide and protein engineering capabilities from the ground up., • Translational Focus: Work on technologies designed to directly influence therapeutic discovery and development across multiple programs., • Cross-Functional Collaboration: Work in a highly integrated environment with physicians, computational scientists, peptide and protein characterization and experimental teams to translate designs from concept to therapeutic candidates., • High Ownership and Impact: Shape tools, workflows, and technical direction with visibility across research and leadership.Job Accountabilities:, • De Novo Design Pipelines: Develop, deploy, and continuously improve computational pipelines for de novo peptide and protein design, including property prediction using data-driven and modeling approaches. Define robust benchmarking, performance metrics, and validation strategies., • Peptide and Protein Design: Design and optimize novel peptide and protein therapeutics using sequence- and structure-based computational design methods, leveraging silico predictions to support lead identification and optimization., • Design-Build-Test Cycles: Work directly with the peptide and protein production and characterization teams to experimentally test designs, interpret results, and incorporate feedback into iterative design cycles., • Cross-Functional Integration: Collaborate with target biology and translational research teams to evaluate designs in biological context and support progression from concept to optimized lead candidates., • Mentorship: Mentoring junior scientists or contributing to hiring and team growth., • Documentation & Communication: Maintain clear, reproducible documentation of methodologies, code, and results. Communicate findings effectively to scientific and leadership stakeholders., • Culture & Leadership: Contribute to a high-performing scientific culture that values rigor, innovation, transparency, collaboration, accountability, and efficient execution.ADDITIONAL INFORMATION, • Required Education: Ph.D. in Computational Peptide/Protein Design, Structural Biology, Protein Engineering, or a closely related field., • Required Experience:, • Postdoctoral or industry experience applying computational modeling to peptide or protein engineering, and a strong publication record or proven track record contributing to therapeutic development., • 5+ years of hands-on experience in peptide and protein design, modeling, and sequence/structure-function prediction, with proficiency in relevant. macromolecular modeling software (i.e. AlphaFold, RoseTTAFold, RFdiffusion, RFpeptides, Boltz, ProteinMPNN)., • Demonstrated understanding of peptide and protein biology, including structure, folding, stability, and experimental constraints, gained through direct experimental work and/or close collaboration with wet-lab teams., • Strong analytical and problem-solving skills applied to complex biological and computational challenges., • Excellent teamwork, time management, documentation, and communication skills, • Proven ability to work effectively in interdisciplinary, cross-functional research environments.For the safety and health of employees, guests, and patients, the Ellison Medical Institute may mandate vaccination requirements for employment. The Ellison Medical Institute's policies are always subject to review and change to ensure they are appropriate under the circumstances. The Ellison Medical Institute is an equal opportunity employer. We believe that an inclusive, collaborative team environment is just as important to our mission as stethoscopes and microscopes. We strive to always provide employees a supportive atmosphere, so they feel confident taking creative risks toward innovation. The Ellison Medical Institute values emotional intelligence and communication with empathy and respect for others. We seek to build a diverse group of people who are curious, have a deep sense of responsibility, and the grit needed to achieve excellence. Powered by JazzHR FptAqjb2Jq

Job Description As a valued member of our team, you will be working for our well-established, medium-sized construction materials company with multiple production plants throughout California. The Ready-Mix Driver is responsible for driving a truck equipped with a concrete mixer to deliver concrete mix to job sites. The role requires the driver to operate the truck in a safe and efficient manner, following and adhering to all applicable Federal & State laws. • This is a part-time, graveyard shift position. The selected candidate may be required to report to various plant locations, including Downey, Santa Monica, and Sun Valley, based on operational needs.Essential Functions:, • Drive truck safely and timely to location for unloading., • Drive truck under loading hopper to receive sand, gravel, cement, and water and starts mixer., • Move levers on truck to release concrete down truck chute into wheelbarrow or other conveying container or directly into area to be poured with concrete., • Perform all duties assigned by management in a timely manner., • Perform pre-trip and post-trip inspections of truck and reports repairs to personnel., • Assemble, disassemble, lift, and carry chutes., • Clean truck after delivery to prevent concrete from hardening in mixer and on truck., • Maintain a clean vehicle, always cleaning it while on duty (spray surfaces of truck with water and protective compounds for cleaning purposes), on company time., • Monitor trucks and other company equipment to ensure appearance, safety, and proper maintenance levels., • Maintain accurate work and driving records of daily activities., • Assist in yard functions, lifting materials and operating yard equipment., • Able to communicate effectively with other staff., • Able to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals. Preferred Education and Experience • Possession of a valid unrestricted California Commercial Driver License (Group A or B) and comply with Department of Transportation regulations., • Must have Air Brake and Tanker Endorsement and a safe driving record., • Knowledge of road construction materials, road construction processes and industry. requirements. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Physical Demands and Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts, hazardous chemicals, outside weather conditions and vibration. The employee is occasionally exposed to wet and/or humid conditions, high, precarious places, fumes or airborne particles, extreme heat and risk of electrical shock and elevated noise levels. Employees must wear the required personal protective equipment; up to and including safety vest, hard hat, e r protection, gloves, and safety glasses. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit for extended periods of time. The employee frequently is required to use hands to finger, handle or feel and reach with hands and arms. The employee is regularly required to stand, walk, climb, balance, stoop, kneel, crouch, crawl, talk or hear. The employee regularly assembles, disassembles, lifts, and carries chutes that can weigh up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Individual must be able to pass a pre-employment physical and drug screen. This Organization Participates in E-VerifyEsta Organizacion Participa en E-Verify Associated Ready Mixed Concrete is an EEO/AA (equal opportunity/affirmative action) company and does not discriminate on the basis of race, color, religion, religious creed, sex, sexual orientation, gender identity or expression, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, marital or familial status, military or veteran status, or any other characteristic protected by under federal, state or local law in the programs or activities which it operates. Associated Ready Mixed Concrete es una compañía EEO/AA (igualdad de oportunidades/acción afirmativa) y no discrimina por motivos de raza, color, religión, credo religioso, sexo, orientación sexual, identidad o expresión de género, origen nacional, ascendencia, edad, condición física odiscapacidad mental, condición médica, información genética, estado civil o familiar, estado militar o de veterano, o cualquier otra característica protegida por la ley federal, estatal o local en los programas o actividades que opera.

Job Description Payroll Type: Non-Exempt Location of Job: Covina, CA Pay Range: $26.00 - $36.00/hour JOB CULTURE The Masonic Homes of California are committed to a culture of Leadership. Our culture is to provide superior service to members, residents and staff through a sound and progressive model of service and care which aligns our mission, vision and operations. We demonstrate excellence in core services and place value on high quality job performance, professional development, effective time management, budget management, workplace safety and resident/employee satisfaction. We are dedicated to disciplined innovation and continuous quality improvement we are a learning company. We are committed to sharing our knowledge and being an organization that attracts the best and brightest talent. We are team-oriented, caring and honest. JOB SUMMARY Under the direction of the Director of Adult/Health Services, Licensed Vocational Nurses are responsible for the comprehensive nursing care of all adult residents. Assures and provides for the health, safety, and welfare of all adult residents of the Masonic Homes at Covina. ESSENTIAL FUNCTIONS • Implement and maintain Health Services standards and objectives in accordance with all Masonic Homes policies and procedures and Dept. of Social Services rules and regulations., • Arrange, monitor and document medical care (including individual care and assessment plans) appropriate to the needs of the residents. Document resident’s response (or lack of), to treatment. Reports changes in residents’ condition to the physician and the Director of Senior Services., • Order, distribute, monitor and record medications as necessary; evaluates effectiveness of these medications and treatments., • Responsible for the inventory and safe storage and/or disposal of all medications, medical supplies and equipment in accordance with applicable policies, procedures, rules and regulations., • Admit residents, document their condition, discharge them, and perform other functions using HCS software., • Assess medical and psychological evaluations on prospective resident admissions., • Maintain all required medical records in accordance with established Social Services regulations., • Maintain confidentiality of all pertinent resident care information to assure their rights are protected., • Assign direct nursing care to be given by certified nursing assistants. Oversee restorative care and activities. Train assigned staff in routine tasks as necessary. Oversee shift staff and makes recommendations regarding performance and discipline., • Visit residents in Assisted Living and make floor rounds daily., • Keep Director of Senior Services informed, orally and in writing, of any changes in a resident's condition., • Attend scheduled staff, resident care and in-service training meetings. Assure that all required and pertinent information is complete and available., • Provide charge nurse coming on duty with concise and accurate reports. Follow up on information and instructions given by charge nurse who is going off duty., • Answer phones and monitor campus access gate., • Administers and reads TB tests. Reports employee TB test results to Human Resources. Conduct Hepatitis in-service and administers Hepatitis B shots., • Assess medical condition of child residents as needed. Medication/Treatment Carts Oxygen Calculator Concentrator Hospital Bed Oxygen Tank Sphygmomanometer Stethoscope Thermometer Blood Glucose Monitor Otoscope Printer Walker Wheel Chair Chart Rack Food Gurney Fire Extinguisher Chart Telephone Computer Pager Copy Machine Fax Requirements EDUCATIONAL REQUIREMENTS/LICENSES/CERTIFICATES • Maintain Licensed Vocational Nurse status., • Maintain current CPR and First Aid Certificates., • Training and experience in geriatric and restorative nursing preferred., • Computer and keyboard skills required. At the Masonic Homes you will have the opportunity to combine your passion for helping people and high ethical standards with the opportunities to advance your career. In return for your skills and passion, we offer: • A work environment focused on teamwork and support for excellent care, • A generous contribution to a 401K plan whether or not you participate, and an additional contribution from the company when you participate in the plan

Job Description Entity: Masonic Homes of California Payroll Type: Non-Exempt Department: Administration Supervisory: No Reports To: Nurse Manager Location of Job: Covina Pay Range: $26.00 - $36.00/hour Position Held By: Open Regular Hours: to be determined Schedule: To Be Determined. Overtime, weekends and evenings may be required JOB CULTURE The Masonic Homes of California are committed to a culture of Leadership. Our culture is to provide superior service to members, residents and staff through a sound and progressive model of service and care which aligns our mission, vision and operations. We demonstrate excellence in core services and place value on high quality job performance, professional development, effective time management, budget management, workplace safety and resident/employee satisfaction. We are dedicated to disciplined innovation and continuous quality improvement we are a learning company. We are committed to sharing our knowledge and being an organization that attracts the best and brightest talent. We are team-oriented, caring and honest. JOB SUMMARY Under the direction of the Director of Adult/Health Services, Licensed Vocational Nurses are responsible for the comprehensive nursing care of all adult residents. Assures and provides for the health, safety, and welfare of all adult residents of the Masonic Homes at Covina. ESSENTIAL FUNCTIONS • Implement and maintain Health Services standards and objectives in accordance with all Masonic Homes policies and procedures and Dept. of Social Services rules and regulations., • Arrange, monitor and document medical care (including individual care and assessment plans) appropriate to the needs of the residents. Document resident’s response (or lack of), to treatment. Reports changes in residents’ condition to the physician and the Director of Senior Services., • Order, distribute, monitor and record medications as necessary; evaluates effectiveness of these medications and treatments., • Responsible for the inventory and safe storage and/or disposal of all medications, medical supplies and equipment in accordance with applicable policies, procedures, rules and regulations., • Admit residents, document their condition, discharge them, and perform other functions using HCS software., • Assess medical and psychological evaluations on prospective resident admissions., • Maintain all required medical records in accordance with established Social Services regulations., • Maintain confidentiality of all pertinent resident care information to assure their rights are protected., • Assign direct nursing care to be given by certified nursing assistants. Oversee restorative care and activities. Train assigned staff in routine tasks as necessary. Oversee shift staff and makes recommendations regarding performance and discipline., • Visit residents in Assisted Living and make floor rounds daily., • Keep Director of Senior Services informed, orally and in writing, of any changes in a resident's condition., • Attend scheduled staff, resident care and in-service training meetings. Assure that all required and pertinent information is complete and available., • Provide charge nurse coming on duty with concise and accurate reports. Follow up on information and instructions given by charge nurse who is going off duty., • Answer phones and monitor campus access gate., • Administers and reads TB tests. Reports employee TB test results to Human Resources. Conduct Hepatitis in-service and administers Hepatitis B shots., • Assess medical condition of child residents as needed. Medication/Treatment Carts Oxygen Calculator Concentrator Hospital Bed Oxygen Tank Sphygmomanometer Stethoscope Thermometer Blood Glucose Monitor Otoscope Printer Walker Wheel Chair Chart Rack Food Gurney Fire Extinguisher Chart Telephone Computer Pager Copy Machine Fax Requirements EDUCATIONAL REQUIREMENTS/LICENSES/CERTIFICATES • Maintain Licensed Vocational Nurse status., • Maintain current CPR and First Aid Certificates., • Training and experience in geriatric and restorative nursing preferred., • Computer and keyboard skills required. At the Masonic Homes you will have the opportunity to combine your passion for helping people and high ethical standards with the opportunities to advance your career. In return for your skills and passion, we offer: • A work environment focused on teamwork and support for excellent care, • A generous contribution to a 401K plan whether or not you participate, and an additional contribution from the company when you participate in the plan

Job DescriptionWe are seeking a highly skilled and motivated B1 Licensed Aircraft Engineer to join our team. In this role, you will be responsible for ensuring the safety, airworthiness, and operational readiness of aircraft. As a B1 Licensed Aircraft Engineer, you will work closely with a team of engineers and technicians, providing technical expertise for the maintenance and repair of aircraft systems, including the structure, engines, and mechanical systems. Your key responsibilities will include troubleshooting, performing routine maintenance, and conducting complex inspections to meet both regulatory standards and our operational excellence. If you are a detail-oriented professional with a passion for aviation, this position offers an exciting opportunity to work in a fast-paced, dynamic environment.Key Responsibilities: • Perform scheduled and unscheduled maintenance tasks on aircraft in accordance with company and regulatory guidelines., • Troubleshoot and repair aircraft systems, including hydraulic, pneumatic, and mechanical components., • Conduct pre-flight and post-flight inspections to ensure aircraft safety and compliance., • Diagnose issues and determine the necessary course of action for repairs or replacements., • Complete maintenance logs and reports accurately to document all work performed., • Work closely with flight crews to ensure the timely and safe return of aircraft to service., • Ensure that all tools, equipment, and facilities used in maintenance are kept in good condition and properly calibrated., • Supervise and mentor junior maintenance staff and technicians., • Liaise with regulatory authorities during inspections and audits., • Stay updated on industry regulations and technology advancements.Qualifications:, • Valid EASA Part 66 B1 License (or equivalent recognized by local aviation authorities)., • Strong knowledge of aircraft systems, including engines, landing gear, airframes, and associated mechanical and hydraulic systems., • Minimum of 3 years of experience working on aircraft maintenance, repairs, or modifications., • Experience with both scheduled and unscheduled maintenance., • Ability to read and interpret technical manuals, blueprints, and engineering drawings., • Excellent troubleshooting and problem-solving skills., • Strong attention to detail and commitment to safety., • Ability to work in a fast-paced environment with minimal supervision., • Excellent communication skills and ability to work as part of a team.Preferred Qualifications:, • EASA Part 66 B1 License or equivalent qualification (e.g., FAA A&P License, CAA B1 License)., • Aircraft Type Ratings on relevant aircraft models (e.g., Airbus, Boeing, Bombardier, etc.)., • Valid Human Factors certification., • Current EWIS (Electrical Wiring Interconnection System) certificate., • Fuel Tank Safety certification (Level 1 and 2 preferred)., • Updated training on relevant regulations (Part 145, Part M, etc.)., • Type ratings on multiple aircraft types., • Experience in both line and base maintenance environments.

Job DescriptionJob Title: Postdoctoral Research Fellow Annual Base Salary: DOE, $71,000-$98,000 along with bonus eligibility and a comprehensive benefits package Location: Los Angeles, CA Our Mission Formerly known as the Ellison Institute of Technology Los Angeles, the Ellison Medical Institute strives to spark innovation, leverage technology, and drive interdisciplinary, patient-centered research to continually enhance health, reimagine and redefine cancer care, and transform lives. Established in 2016 as a medical research and development center, the Institute features innovation labs for artificial intelligence and molecular analytics and was among the first organizations to vertically integrate the interdisciplinary study and treatment of disease. We offer multifaceted programs, including a preventative medicine and cancer clinic, cross-disciplinary research laboratories, a health policy think-tank, and community outreach and educational programs. Please visit emila.org for more details. Job Summary The Convergent Systems Research Department is a interdisciplinary team of engineers, scientists, and technicians working collaboratively across the Ellison Medical Institute’s intellectual ecosystem to accelerate the development of novel therapeutics. The department develops innovative therapeutic assays, imaging systems, and analytical tools, with responsibilities spanning the full design lifecycle—from ideation and protoyping to piloting, validation, and the establishment of standard operating procedures (SOPs). As a Postdoctoral Research Fellow, you will play a central role in both technology development and therapeutic research at EMI. You will apply your immunology expertise to interpret and contextualize data generated by a newly developed instrument aimed at advancing our understanding of T cell activation in research and clinical settings. In parallel, you will contribute to the evaluation and advancement of therapeutic development efforts, working closely with cross-functional teams to ensure these technologies and insights translate effectively to healthcare applications. This is a two-year appointment, with the possibility of extension based on research progress. Periodic travel to the UK will be required, typically 1-3 times per year. Why You Should Join Us: • Advance Translational Immunology: Leverage expertise in immunology—particularly T cell activation and immune functional assays—to support the development of innovative biotechnology platforms with direct clinical and translational relevance., • Operate at the Intersection of Biology, Engineering, and Medicine: Partner closely with engineers, data scientists, and clinicians to define how immune responses are measured, analyzed, and translated into real-world biomedical applications., • Build Industry-Ready Research Skills with Clinical Impact: Develop experience in system validation, assay robustness, and biologically meaningful readouts within a fast-paced, rigorous environment focused on patient-facing outcomes.Job Accountabilities:, • Design and Execute T Cell Activation Experiments: Plan, perform, and interpret T cell activation studies using novel imaging-based approaches, including optimization of activation conditions and functional readouts., • Develop and Validate Imaging Assays: Lead the refinement, qualification, and validation of imaging-based assays to interrogate immune cell behavior in both research and translational settings., • Integrate Multimodal Data: Synthesize imaging data with flow cytometry, molecular, and functional assay outputs to build a comprehensive understanding of T cell activation and function., • Analyze High-Dimensional Datasets: Independently analyze complex datasets and collaborate with engineering and data science teams to enhance data quality, throughput, and interpretability., • Serve as Immunology Subject-Matter Expert: Provide scientific leadership in assay design, troubleshooting, and experimental execution across multiple programs., • Drive Experimental Optimization and Reproducibility: Perform root-cause analyses to identify technical or biological sources of variability and implement strategies to improve robustness and reproducibility., • Lead Projects from Concept to Milestones: Define and execute project plans with clear objectives, timelines, and success metrics to advance program goals., • Document and Communicate Scientific Results: Maintain detailed experimental records, contribute to SOPs and validation documentation, and present findings to internal and external stakeholders., • Collaborate and Contribute Scientifically: Partner with cross-functional teams and clinical collaborators, contributing to publications, presentations, and scientific discussions that shape platform and assay development.ADDITIONAL INFORMATION, • Required Education: PhD in Immunology, Biology, Microbiology, Biochemistry, Chemistry, Pathology, Translational Medicine, Biomedical Engineering, or related field or MD with substantial research experience in a relevant discipline., • Required Experience:, • 4–6 years of hands-on immunology research experience (including doctoral training), with demonstrated expertise in T cell biology and activation., • Proven track record designing and executing cellular assays, analyzing complex datasets, and contributing to experimental strategy in fast-paced, collaborative, and multidisciplinary research environments., • Required Skills:, • Strong hands-on experience with T cell activation assays and core immunological techniques (e.g., flow cytometry, cytokine measurements). Demonstrated ability to design, execute, and interpret quantitative biological experiments with rigor and reproducibility., • Experience analyzing complex biological datasets; effective collaboration with engineers, data scientists, and clinicians; and proficiency in experimental troubleshooting, documentation, and scientific reporting. Ability to work both independently and as part of multidisciplinary teams, with excellent communication and organizational skills.For the safety and health of employees, guests, and patients, the Ellison Medical Institute may mandate vaccination requirements for employment. The Ellison Medical Institute's policies are always subject to review and change to ensure they are appropriate under the circumstances. The Ellison Medical Institute is an equal opportunity employer. We believe that an inclusive, collaborative team environment is just as important to our mission as stethoscopes and microscopes. We strive to always provide employees a supportive atmosphere, so they feel confident taking creative risks toward innovation. The Ellison Medical Institute values emotional intelligence and communication with empathy and respect for others. We seek to build a diverse group of people who are curious, have a deep sense of responsibility, and the grit needed to achieve excellence. Powered by JazzHR c8NRAUHTZl

Job Description$30 per hour, local work, home dailyUrgently Hiring – Class A CDL Delivery Driver – Hazmat & Tanker Location: Santa Fe Springs, CAWe are looking for experienced Class A CDL drivers with Hazmat and Tanker endorsements for a full-time, local delivery role. This position is requires flexibility to offload freight using an electric or manual pallet jack when needed. Local routes, home daily with a consistent schedule. Driver Snapshot • Pay: $30.00/hr, • Schedule: Monday – Friday | Start: 7:00 AM – 10:00 AM, • Route: Local pickups & deliveries – Home Daily, • Freight: Hazmat and tanker loads, • Equipment: Tractor trailers (manual & electric pallet jacks provided), • Local pick up and deliveries. Offloading with electric or manual pallet jack as needed., • Perform trailer swaps, and handle offloading with pallet jack when required, • Load/unload freight safely and efficiently, • Maintain DOT compliance and safety standards, • Deliver excellent customer service at every stop, • Minimum 2.5 years recent Class A driving experience (within last 3 years), • Hazmat & Tanker endorsements required, • No automatic transmission restriction on CDL, • Physically able to handle freight with pallet jack, • Strong work ethic, punctual, and team-focused, • Local routes – Home Daily, • Weekly pay via Direct Deposit or Rapid! PayCard, • Competitive pay $30/hr + overtime if applicable, • Medical & Dental insurance (eligible after 60 days), • Supportive, long-term team environmentQualified drivers may be contacted the same day for an interview. Apply now to join a stable, rewarding driving team in Santa Fe Springs.#PTS1

Job DescriptionJob Title: Director, Compute & Data Infrastructure Annual Base Salary: DOE, $175,000-$232,000 along with bonus eligibility and a comprehensive benefits package Location: Los Angeles, CA Our Mission Formerly known as the Ellison Institute of Technology Los Angeles, the Ellison Medical Institute strives to spark innovation, leverage technology, and drive interdisciplinary, patient-centered research to continually enhance health, reimagine and redefine cancer care, and transform lives. Established in 2016 as a medical research and development center, the Institute features innovation labs for artificial intelligence and molecular analytics and was among the first organizations to vertically integrate the interdisciplinary study and treatment of disease. We offer multifaceted programs, including a preventative medicine and cancer clinic, cross-disciplinary research laboratories, a health policy think-tank, and community outreach and educational programs. Please visit emila.org for more details. Job Summary At the Ellison Medical Institute, we are seeking an accomplished Director, Compute & Data Infrastructure to architect, scale, and operationalize the research computing and data foundations that power discovery across digital pathology, multi-omics, computational modeling, and AI-driven science. This leader owns the strategy and execution of our compute, storage, and data ecosystems—building unified architectures that ensure research data is visible, interoperable, well-governed, and fully compliant with regulatory, sponsor, and institutional requirements. The role is central to establishing the Institute’s readiness for artificial intelligence by delivering robust metadata standards, scalable data platforms, and high-performance computing environments designed for modern ML workflows. The ideal candidate brings deep technical expertise in cloud/hybrid research computing, a strong understanding of biomedical data governance, and the ability to translate scientific needs into scalable infrastructure roadmaps. This is a high-impact, highly cross-functional position working closely with scientific, clinical, engineering, IT, and operational leaders. You will guide cloud partnerships, optimize technology investments, and mentor a high-performing technical team committed to supporting world-class research. Why You Should Join Us: • Build the Foundation for AI-Driven Science: Develop the compute and data architectures that enable cutting-edge machine learning, digital pathology, and multi-omic research., • Directly Accelerate Discovery: Shape systems that allow scientists to generate insights faster, collaborate more effectively, and advance breakthroughs from concept to clinic., • Lead at the Intersection of Science & Technology: Partner with principal investigators, data scientists, clinicians, IT, and executive leadership to align infrastructure with transformative scientific priorities., • Operate With Autonomy and Purpose: Drive strategy in a mission-driven environment that values innovation, ownership, and technical excellence., • High Visibility, High Impact: Your work influences nearly every aspect of research operations—enabling reproducibility, compliance, and long-term institutional success.Key Responsibilities Infrastructure Strategy & Leadership • Develop and execute a unified compute and data infrastructure strategy across on-premises and cloud environments., • Build scalable, secure, cost-efficient architectures that support long-term research goals.Data Governance & Centralization, • Establish centralized visibility, governance, and lifecycle management for research data assets aligned with HIPAA, GxP, and FDA data integrity requirements., • Ensure systems support auditability, traceability, and reproducible science, including IND-relevant workflows.Operational Excellence, • Oversee compute, storage, networking, and data pipeline operations to ensure resilience, reliability, and performance., • Manage cloud and vendor partnerships to support institutional strategy and optimize cost.AI/ML Enablement, • Architect modern data platforms, metadata standards, and high-performance computing environments optimized for AI/ML and automation., • Partner with scientific teams to integrate platforms with emerging research workflows.Cross-Functional Alignment, • Collaborate with scientists, engineers, IT, and leadership to translate research requirements into actionable technical roadmaps., • Present recommendations, performance insights, and future-state strategies to senior leadership.Team Development, • Lead, mentor, and develop systems engineers, DevOps engineers, software engineers, and other technical staff., • Foster a culture of excellence, reliability, and innovation.Knowledge Sharing & Communication, • Create documentation, tutorials, and training resources to help researchers adopt compute and data platforms., • Present platform capabilities, innovations, and best practices through internal and external forums.ADDITIONAL INFORMATION, • Required Education:, • Bachelor’s degree in Computer Science, Engineering, or related field required; Master’s or Ph.D. strongly preferred., • Required Experience:, • 8+ years years leading compute and data infrastructure in life sciences, research computing, or similarly complex environments., • Proven expertise with cloud-native and hybrid architectures, scientific data management, distributed storage, and metadata/catalog systems., • Demonstrated success enabling research through infrastructure, ideally in digital pathology, computational biology, or computational drug discovery., • Strong understanding of data governance, integrity, and compliance frameworks relevant to biomedical research (HIPAA, GxP, FDA)., • Experience in strategic planning, budget management, vendor negotiations, and cloud cost optimization., • High scientific fluency with the ability to partner effectively with discovery, translational, and clinical leaders., • Advanced proficiency in financial modeling, valuation, deal structuring, and strategic analysis., • Required Skills:, • Proven ability to lead cross-functional teams and partner effectively with scientists, IT, and data professionals., • Excellent communication and collaboration skills, capable of translating complex technical concepts into actionable strategies for non-technical stakeholders., • Strong strategic thinking with a record of operational excellence and innovation., • Self-starter with experience in a fast-paced environment preferred.For the safety and health of employees, guests, and patients, the Ellison Medical Institute may mandate vaccination requirements for employment. The Ellison Medical Institute's policies are always subject to review and change to ensure they are appropriate under the circumstances. The Ellison Medical Institute is an equal opportunity employer. We believe that an inclusive, collaborative team environment is just as important to our mission as stethoscopes and microscopes. We strive to always provide employees a supportive atmosphere, so they feel confident taking creative risks toward innovation. The Ellison Medical Institute values emotional intelligence and communication with empathy and respect for others. We seek to build a diverse group of people who are curious, have a deep sense of responsibility, and the grit needed to achieve excellence. #LI-DNP Powered by JazzHR ZHkbq6Z2QD

Job Description Responsibilities Are you an Experienced Mobile Diesel Technician looking for an opportunity to work for a leader in the commercial truck industry? We are searching for tenured & certified technicians to support our customers! Our Mobile Diesel Technicians are responsible for maintaining the fleet for clients and to handle service calls at client locations, so we can provide expedited expertise directly to our customer's trucks & equipment on site. Rush Truck Centers opens the door to the world of opportunity. We are the largest network of commercial vehicle dealerships across the US representing truck and bus manufacturers. Our franchises include Peterbilt, International, Hino, Isuzu, Ford, IC Bus and Blue Bird. We offer a rewarding career as a leader in the transportation industry. Grow with us as we continue to expand our network of locations and services. Responsibilities: • Maintain all aspects of equipment according to company standards., • Handle basic maintenance of the truck including filling tank with fuel, checking oil, keeping it clean, and making sure required inspections are performed and documented as assigned., • Manage inventory control on the service truck and for keeping the vehicle properly stocked., • Report to the Service Manager and will be assigned duties on a daily basis., • Maintain availability for after-hours service calls and be available for an open work schedule., • Maintain and inventory the supplied tools for the work required in maintaining diesel engine trucks and associated equipment, • Read job order and observes and listens to vehicle in operation to determine malfunction and to plan work procedures., • Utilize various diagnostic equipment to determine malfunction and utilize available technical information to determine and perform correct repair procedure., • Diagnosis, removal and replacement of injectors, pistons, liners, cam shafts, cylinder heads, rod and main bearings, oil pans, clutches, fan hubs, differentials, fifth wheels, brakes, changes or recharges batteries, and replaces transmissions and other parts., • Perform all necessary diagnostic and documentation functions on the company computer system., • Examine protective guards, loose bolts, and specified safety devices on trucks, and makes adjustments., • Lubricate moving parts and drives repaired vehicle to verify conformance to specifications., • Perform preventative maintenance work as requested., • Document and submit necessary paperwork or enter into mobile service program as work performed in an accurate and timely manner., • Respond to customer inquiries regarding the work. Foster positive customer relations., • Advise customer and/or service writer of any repairs or services which should be performed within the next 3 months., • Participate in training and utilize that training in the course of work. Benefits: * We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally. Basic Qualifications: • High school diploma or general education degree (GED)., • 5 years' experience as a Class 7 & 8 technician in a dealership or related truck service facility, • Current CDL preferred but not required., • Medical card as required by the FMVS., • Mechanical aptitude and technical ability is a must., • Peterbilt, International, Ford, Hino, Isuzu, Cummins, & ASE certifications are preferred & rewarded Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Job DescriptionDescriptionAs a Mechanical Engineer at Impulse for our Vehicle Engineering Team, you will own all aspects of the design, analysis, build, test and integration of flight hardware – working with cross-functional engineering teams to accomplish this. This means cradle-to-grave ownership of pressurized and/or unpressurized structures in support of Impulse’s collection of next generation advanced propulsion space vehicles. Responsibilities • Design, analyze, build, test, and document innovative structures; example systems include primary structure weldments, tank internal fluid/structural devices, payload attachment fittings, and stage propulsion/avionics integration hardware, • Steer system definition, layout, requirements, and verification, • Support first article build through the ramp to production in collaboration with the manufacturing team, rolling in DFM and reliability improvements, • Support development and qualification test campaigns in collaboration with the test team, creating test plans to gather key learnings and demonstrate flightworthiness, • Establish driving load cases and environments in collaboration with the loads/dynamics and thermal teams, • Collaborate effectively with partner teams (such as propulsion, avionics, and GNC) to create a high performing, integrated system Minimum Qualifications • Bachelor’s degree in Mechanical Engineering or related field, • 5+ years demonstrated experience designing and analyzing structural aerospace hardware, • Strong knowledge of strength and stability hand calculations for structural sizing and model validation, • Strong understanding of mechanics of materials, material failure modes, and associated analysis methods, • Familiarity with a wide set of manufacturing processes such as machining, welding, forming, and joining methods, • Proficiency with CAD software and assembly management, • Demonstrated experience working collaboratively across different teams, • Ability to communicate technical challenges, explain rationale and/or resolve concerns Preferred Skills and Experience • Master’s degree in Mechanical Engineering or related field, • 7+ years of demonstrated experience designing and analyzing highly performant structures with space-flown hardware, • Experience with aerospace aluminum welding, inspection, and allowables development, • Experience with composite primary or secondary structure design, analysis, and testing, • Experience with payload accommodations, testing, and validation, • Experience with structural testing, validation, and correlation methods, • Experience working on a launch vehicle development effort, • Experience in a startup or agile development environment Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by $450M from leading investors including Altimeter Capital, Redpoint Ventures, T. Rowe Price, Lightspeed Venture Partners, Alpine Space Ventures, and others – with an additional $500M in signed contracts across commercial and US government customers – we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches planned through 2026 and 2027, we're Building Bigger to develop the solar system and become a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a groundbreaking Series C space startup, we'd love for you to apply. The Role You will own the success of mechanical structures and mechanisms used for a propulsion system that will be the highest-powered electric propulsion system ever flown and unlock new mission concepts and increase our access to deep space. As part of a small multidisciplinary team, your role will involve mechanical design, development, build, test, and analysis of the satellite's plasma propulsion system and all related hardware. In your first 6 months, you will define product requirements, create initial concepts and trades, perform preliminary and detailed analysis, define development test campaigns, and produce development hardware. In your first year, you will validate your designs through prototype iterations and build and qualify flight hardware. In your first two years you will fly your hardware in space while directly supporting production and integration. Responsibilities • Own the mechanical design of propulsion system hardware including propulsion modules, critical thruster components, the propellant management system, avionics box design, propulsion secondary structures, and potentially tank development, • Validate your designs through the entire lifecycle from concept to production, and successful flight demonstrations, • Generate 3D models, fully dimensioned drawings, and interface control documents, • Perform analysis on data from testing hardware, iterating designs, and critical go/no-go calls on hardware performance, • Develop and execute component and system-level test plans, • Manage key propulsion vendors and suppliers through hardware delivery, • Bachelor's degree in mechanical, aerospace, or other relevant engineering discipline, • 10+ years of experience with mechanical and/or electromechanical design and analysis, • Experience with CAD or FEA software packages, • Experience with the practical application of GD&T, • Demonstrated proficiency in the principles of mechanical design, materials, thermodynamics, and fluids, • Demonstrated ability to own mechanical hardware or systems within an integrated engineering team outside a classroom setting, • Experience in advanced propulsion technologies, including high-performance engines, in-space propulsion, and propulsion system integration, • Experience designing, building, and testing mechanical assemblies for aerospace applications (satellite mechanical systems, payloads, launch vehicles, propulsion systems, and/or aircraft structures and mechanisms), • Deep experience in the development and qualification of high-pressure and low-pressure fluidic components, this may include flight feed system or pressurized tanks, • Demonstrated understanding of structural analysis and failure modes of complex mechanical systems in space environments and operations, • Base salary range for this role is $140,000 - $175,000 + equity in the company, • Salary will be based on several factors including, but not limited to: knowledge and skills, education, and experience level If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionSalary: $27.57 + commission Join Our Team!!At World Oil we strive to be an employer of choice by recruiting, developing, retaining, a high performing and diverse workforce. As a family-owned company, our focus in the work life balance fosters a healthy, safe, and productive work environment for all employees. More than 75 years later, learn more About Us at:. World Oil Environmental Servicesrecycles, produces, and transports vital petroleum products and provides important environmental services in California and throughout the western United States. We deliver more than just high-quality, high-performance products and services. We believe in doing things right and doing them well every day.World Oil offers competitive hourly pay. Company Benefits include multiple Medical/ Dental plan options, Vision, Life Insurance, 401(k) with employer match, STD/LTD, Paid Holidays, Vacation, Sick Time, and so much more! We are seeking an experienced Local Commercial Driver for aFull-time position in Compton, CA. Pay Range: $27.57 - $31.57 per hour ($3.00 to $4.00 per hour is included in rate to be earned as commission) Position Summary: The Driver position is responsible for the pick up and delivery of hazardous waste and/or non-hazardous waste and/or material or other products at various customer locations. The Driver drives to multiple customer job sites to perform various environment services; i.e. picking up used oil, used antifreeze and oily water, and delivery to a Transfer Disposal Storage Facility. The position may also include picking up and delivering full or empty drums or other containers of hazardous waste or non-hazardous waste or material. Essential Duties and Responsibilities: The essential functions include, but are not limited to the following: • Operates a commercial vehicle in a safe manner on a daily basis., • Plans a route and completes customer service requests in an efficient manner., • Completes their pre-trip inspection daily to determine the unit safe to operate., • Maintains basic vehicle maintenance, including fueling vehicle., • Drives and pulls into customer site to pump oil or pick up drums in a safe manner., • Offloads oil into railcar or offload drums into trailers., • Communicates with customers, supervisors, and other employees effectively., • Offloads trucks into tank farm Other Functions: • Provides professional, respectful, and courteous customer service at all times., • Completes required annual training via online or a classroom type setting., • Performs other related duties as assigned. Required Qualifications: • High School Diploma or equivalent (G.E.D.)., • 21 years of age or older, • Commercial Class A/B Drivers License with all endorsements., • 1 year of experience driving a commercial vehicle and maintaining a Commercial Class A/B drivers license preferred., • Ability to lift up to 50LBS., • Manual and Automatic Transmission required, • Must be able to work Monday through Friday (available to work on Saturday) 5:00 am - 3:00pm EEO Statement: It is the policy of World Oil and its subsidiaries to provide equal opportunity for all applicants and employees. The Company does not discriminate on the basis of race, age,color, religion, sex/gender, gender identity/gender expression, sexual orientation, marital status, medical condition, military/veteran status, national origin, ancestry, disability, genetic information, reproductive health decision making, or any other status protected by state or federal law.

Job Description A Superintendent is responsible for ensuring jobs in the field are performed efficiently, safely, and in a quality manner. The Superintendent is the primary contact for Foremen and will direct the Field Foremen as needed regarding site related activities. The Field Superintendent will work with the Lead Superintendent and Project Managers to achieve these goals. Duties and Responsibilities • Ensure jobs are being executed in an efficient manner and that the Field Foreman has all the resources needed to achieve the goal of completing the job on time and under budget., • Responsible for communicating to Operations and Project Managers any problems with field work and with assisting in resolving those problems., • Communicate with Operations regarding job schedules and performance issues that may arise., • Ensure all HMT safety policies and procedures are being followed., • Perform a minimum of 12 jobsite safety inspections per year and document as required per the safety manual., • Responsible for assisting with the maintenance of HMT-owned equipment as needed. Communicate with Operations regarding equipment problems., • Assist the Project Manager in identifying scope of work changes., • Coordinate communication among your team members, the customer, and subcontractors as needed., • Attend job walks and bid meetings as needed to assist the Project Managers in determining the site conditions and developing the scope of work for customer quotations., • Must be able to convert site measurements into legible sketches (drawings) for presentation to HMT engineering for scope planning and as-built drawings., • Ensure that all QA/QC policies and procedures are being followed., • Assist with the training of employees as needed., • Assume the site related project duties of Field Foreman when they are scheduled for vacation or take personal time away from the job., • Responsible for the training of crew members in the art of tank building. Train prospective employees to become Field Foreman and assist with the HMT Mentoring Program including documentation., • Leverage existing relationships to mitigate issues at site and secure new opportunities., • The Field Superintendent will also assist with performing general office work as required by the Area or Regional Manager to help ensure a profitable and well-run area and/or regional office., • The Field Superintendent should be aware HMT has a comprehensive drug and alcohol policy and program in place, including random testing., • High school diploma or equivalent., • 2 years+ experience as a field foreman in the AST (Above Ground Storage Tank industry), • Must have a minimum of 2 years of Foreman experience, • Detail-oriented, Excellent organizational skills, • Ability to handle multiple jobs concurrently., • Ability to handle multiple jobs concurrently (able to manage up to 15 employees)., • Maintain accurate Field Progress Reports., • Able to give clear and concise instructions to multiple employees in the execution of work., • Ability to complete all required paperwork associated with safety and QA/QC without assistance., • Possess knowledge of automatic welding and burning equipment. This would include the ability to run, repair, and train others in the use and operation of this type of equipment., • Ability to interpret field and fabrication drawings. The physical demands must be met by an employee to successfully perform essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform essential functions. While performing the duties of this job, the employee is regularly required to stand, walk and use hands to finger, handle, or feel and reach with hands and arms. The employee frequently is required to walk, stoop, kneel, climbing, carry, pushing/pulling and use repetitive wrist and hand movements. The employee may be required to lift and/or move objects of up to 50 pounds. Hearing, seeing ability of rapid mental coordination. It is required to be mentally alert for entire regular shift. This position may work in various locations within the U.S. Some locations may be subject to extreme temperatures, working in high places, etc. Potential for exposure to temperature changes, wetness, confined spaces, fumes/odors, working with ladder/scaffolds, working with pressurized equipment, high places, hazardous materials, and working alone. HMT will supply adequate training and equipment to meet the functions of the job. About HMT HMT is the global leader in aboveground storage tank solutions. HMT brings a distinct level of innovation and service to the tank industry through a unique approach of partnering with customers to optimize tank operations. Knowing that every customer’s need is different, we use our decades of experience to customize solutions that help tank operations become more efficient, more productive, and more profitable. HMT is an Equal Employment Opportunity Employer. We will not tolerate discrimination because of race, color, religion, sex, age, national origin, military or veteran status, mental or physical disability, genetic information, gender, gender identity or expression, sexual expression, or any other unlawful reason. All qualified applicants are encouraged to submit applications for employment. Employment with HMT is At-Will.

Job Description Job Opportunity: Sales Porter Location: Beverly Hills, CA Department: Sales Employment Type: Full-Time and/or Part-Time Compensation: $18.00–$21.00 per hour (non-exempt, hourly; based on experience and qualifications) Company: Optima Dealer Services, Inc. About Optima Dealer Services, Inc. Optima Dealer Services, Inc. provides professional staffing and operational support to luxury automotive dealerships throughout California. We are committed to operational excellence, regulatory compliance, and maintaining a respectful, safe, and inclusive workplace. Position Overview The main role of a Sales Porter at Optima Dealer Services, Inc. is to be responsible for supporting the Sales Department by managing the flow and presentation of vehicles across the dealership. This includes receiving, moving, fueling, and parking vehicles, ensuring cleanliness and organization of lots and showrooms, and providing support to the sales staff and customers Why Join Us? • Hands-On Experience: Work with luxury and late-model vehicles, • Active Role: Physically engaging work environment, • Skill Development: Exposure to dealership operations and vehicle handling, • Growth Opportunities: Advancement paths within service and operations, • Professional Team Culture: Safety-focused, respectful, and performance-driven Essential Duties and Responsibilities • Organize and maintain new and pre-owned car lots in a neat, orderly, and safe manner., • Manage logistics of vehicles between the dealership and parking/storage lots., • Ensure that sold vehicles are properly prepared for delivery., • Avoid blocking vehicles, occupying ADA spaces inappropriately, or creating safety hazards., • Oversee inventory, issuance, and security of vehicle keys and key machines., • Promptly report any missing or misplaced keys to management., • Assist with maintaining accurate records of vehicle locations and availability., • Ensure all showroom vehicles are clean, fully charged (EVs), fueled (minimum quarter tank for gas vehicles), and properly staged., • Inform the Car Wash Manager when a vehicle requires cleaning., • Verify that seat memory, A/C, and radio settings match pre-delivery requirements, documenting as needed., • Support the Sales Manager with showroom organization and vehicle rotation., • Greet guests in a courteous and professional manner, using positive and welcoming language., • Maintain professional dress, body language, and demeanor while on duty., • Provide excellent customer service by anticipating guest needs and delivering a “five-star” experience. Requirements Driving Assignments Only • Valid California driver’s license and acceptable driving record, • Ability to safely operate automatic vehicles (manual transmission preferred but not required), • Strong attention to detail and time management skills, • Ability to follow instructions and work independently or as part of a team, • Ability to stand and walk for extended periods, • Ability to lift up to 25 pounds Compensation & Benefits • Competitive hourly pay within the stated range, • Paid sick leave in accordance with California law, • Health benefits eligibility (based on employment status and hours worked), • Vacation benefits for eligible full-time employees, • Training and advancement opportunities How to Apply If you are interested in joining a professional, safety-focused team supporting luxury automotive dealerships, we encourage you to apply today. Equal Employment Opportunity Statement Optima Dealer Services, Inc. is an Equal Opportunity Employer and complies with all applicable federal, state, and local employment laws, including the California Fair Employment and Housing Act (FEHA). Employment decisions are based on qualifications, merit, and business needs without regard to race, color, religion, sex, sexual orientation, gender identity or expression, age, disability, medical condition, genetic information, marital status, national origin, ancestry, veteran status, or any other protected characteristic.

Job Description About Us Centrally located in Torrance, California, Sunnyside Nursing and Post-Acute Care provides sub-acute nursing care, rehabilitation services, skilled nursing, and long-term care. Our compassionate staff offers individualized care plans for each resident to ensure personalized care is provided to all our patients with a goal to return home. Our team of qualified professionals provides compassionate care by: • Maintaining high medical integrity, • Fostering a team spirit among staff Job Description • Perform set-up, operation and monitoring of ventilator when resident’s respiratory system is incapable of adequate spontaneous ventilation, • Assist with admission, transfer and discharge of residents with airway needs as required., • Receive/give report upon reporting in and ending shift duty hours if assuming a direct care assignment., • Provide Oxygen Therapy; tank, tent, mask, cannula, walker, high flow, etc. respiratory care., • Coughing and deep breathing instruction and exercises and related maneuvers including, Incentive Spirometry., • Aerosol Therapy; Bland and Medicated, Metered dose, Ambient, Ultrasonic, Sputum Induction., • Chest therapy., • IPPB, CPAP, and BiPAP Therapy, • Airway maintenance as to oral, nasal, and tracheal suctioning., • ABG interpretation and analysis., • Consult with the physician and follow protocols for ventilator management including weaning, decannulation, and terminal weaning., • Perform assessment of the patient, determining needs related to the frequency and duration of the treatment regime ordered by the MD., • Request re-order when necessary and communicates with nurse and MD about discrepancies and concerns., • Initiate and follow through with protocols described in the policy and procedure manual and as approved by the department and medical/pulmonology director. Must Have an active and valid Respiratory Therapist License Must be authorized to work in the United States Full-Time or Per Diem Available shifts: 6:00am - 6:30pm 6:00pm - 6:30am Benefits Why Work for Sunnyside Nursing & Post-Acute Care • Top of the market wages with adjustments: $36.17 - $40.83 per hour, • Paid orientation and training, • Opportunities for growth, • Paid sick leave/paid holidays, • Medical, dental, vision, and AFLAC, • 401K If hired, we require that all employees be vaccinated, unless a medical or religious accommodation is needed. EQUAL OPPORTUNITY EMPLOYER We are an equal opportunity employer. We celebrate diversity & pride ourselves on creating an inclusive environment for all employees and residents.

Job DescriptionJob Title: Clinical Associate I Hourly Rate: DOE, $25.00-$31.00 along with bonus eligibility and a comprehensive benefits package Location: Los Angeles, CA Our Mission Formerly known as the Ellison Institute of Technology Los Angeles, the Ellison Medical Institute strives to spark innovation, leverage technology, and drive interdisciplinary, patient-centered research to continually enhance health, reimagine and redefine cancer care, and transform lives. Established in 2016 as a medical research and development center, the Institute features innovation labs for artificial intelligence and molecular analytics and was among the first organizations to vertically integrate the interdisciplinary study and treatment of disease. We offer multifaceted programs, including a preventative medicine and cancer clinic, cross-disciplinary research laboratories, a health policy think-tank, and community outreach and educational programs. Please visit emila.org for more details. Job Summary The Ellison Medical Institute is seeking a reliable and detailed-oriented front office administrator to join its Oncology and Preventative Health clinic. The Clinical Associate I is a key member of the clinic, serving as the primary point of contact for patients and visitors while supporting the clinic’s commitment to exceptional, patient-centered care. This role ensures efficient front-office operations by scheduling patient appointments, managing incoming communications, maintaining accurate medical records, and overseeing registration and insurance processes. Reporting to the Clinic Manager, the Clinical Associate I contributes to operational excellence and a seamless patient experience that supports the Institute’s broader mission of delivering high-quality, compassionate oncology and preventative medicine services. Why Join Us: • Mission-Driven Impact: Join a collaborative oncology and preventative medicine team where clinical care, research, and a broad range of other disciplines come together to continually enhance health, reimagine and redefine cancer care, and transform lives., • Patient Experience: Help create a seamless, supportive experience for every patient who walks through our doors, serving as a trusted first point of contact in a multidisciplinary team committed to an integrated, patient-focused care., • Patient Access & Experience: Serve as the first point of contact from registration through discharge, ensuring a welcoming, professional, and seamless patient experience. Accurately collect, verify, and update demographic, insurance, benefits, and care team information to support proper registration, billing integrity, and continuity of care. Facilitate efficient check-in and check-out processes., • Appointment & Infusion Scheduling: Coordinate and schedule patient appointments, including follow-up and infusion visits. Confirm upcoming appointments, maintain schedule accuracy, and support clinic flow to ensure timely access to care., • Front Office Communications: Manage incoming calls via multi-line phone system, triage inquiries appropriately, route calls to clinical or administrative staff, and document messages accurately to ensure timely resolution and follow-up., • Medical Records & Documentation Management: Maintain accurate and complete patient records within the Electronic Health Record (EHR) system. Obtain, upload, and organize clinical documentation to support care coordination., • Correspondence & Document Processing: Process incoming faxes and electronic correspondence, ensuring timely review, accurate documentation, and appropriate distribution to care team members., • Required Education: High School Diploma / GED required; Associate’s Degree preferred. Required Experience: A minimum of 6 months to 1 year of work experience is required, experience in a healthcare or customer service setting is preferred., • Required Skills & Experience:, • Strong verbal and written communication skills., • Excellent organizational skills and attention to detail for accurate maintenance of patient records and communications., • Proficiency in electronic health records (EHR) systems and office software, including Microsoft Office Suite, Outlook, and Adobe Acrobat., • Critical thinking and problem-solving skills., • Knowledge of and adherence to privacy regulations, including HIPAA., • Ability to maintain discretion and confidentiality., • Effective time management to handle multiple tasks and prioritize responsibilities., • Attention to compliance and regulatory requirements., • Patience and empathy in addressing patient inquiries and concerns., • Team collaboration and adaptability.For the safety and health of employees, guests, and patients, the Ellison Medical Institute may mandate vaccination requirements for employment. The Ellison Medical Institute's policies are always subject to review and change to ensure they are appropriate under the circumstances. The Ellison Medical Institute is an equal opportunity employer. We believe that an inclusive, collaborative team environment is just as important to our mission as stethoscopes and microscopes. We strive to always provide employees a supportive atmosphere, so they feel confident taking creative risks toward innovation. The Ellison Medical Institute values emotional intelligence and communication with empathy and respect for others. We seek to build a diverse group of people who are curious, have a deep sense of responsibility, and the grit needed to achieve excellence. #LI-DNP Powered by JazzHR 3KxyBJxHE7