Trabajos testing en Austin, Texas - Page 11Crear alertas

Job Description POSITION SUMMARY The Traffic Signal Installer - Austin, Texas assembles, wires, and installs traffic signal systems, pedestrian push buttons, detection devices, and related equipment according to engineered layouts and specifications. This role works with overhead and underground wiring, operates bucket trucks and aerial lifts, and ensures all installations meet MUTCD, OSHA, and project standards. Work is performed outdoors in all weather conditions and requires technical skill, physical stamina, and strict adherence to electrical and aerial safety practices. YOUR ROLE • Read and interpret intersection layouts, engineered schematics, and overhead signal plans., • Install and wire traffic signal heads, pedestrian push buttons, and detection devices per project specifications., • Pull, route, and splice overhead and underground wires through conduit systems, maintaining correct color coding and terminations., • Assemble and install signal poles, mast arms, and brackets using proper hardware, torque specifications, and rigging techniques., • Install and configure detection systems, controllers, cabinets, and battery backup systems to ensure continuous operation., • Operate bucket trucks and aerial lifts to position and adjust traffic signals, ensuring correct orientation and visibility., • Perform voltage, continuity, and signal testing using multimeters and other diagnostic tools., • Follow MUTCD, OSHA, and company standards for aerial work, electrical safety, and traffic control., • Maintain neat and organized wiring inside cabinets, junction boxes, and poles., • Assist with material staging, inventory management, and loading/unloading of poles, arms, and cabinets., • Document installations, inspections, and adjustments in project logs or digital tools., • Identify and report layout discrepancies, material needs, or safety hazards to the Foreman or Leadman immediately. WHAT YOU BRING • 1–5 years of experience in traffic signal installation, electrical work, or related construction trade., • Ability to read and interpret construction drawings, electrical schematics, and riser diagrams., • Knowledge of MUTCD, OSHA, and TxDOT traffic signal installation standards preferred., • Skilled in the safe use of bucket trucks, aerial lifts, and basic rigging practices., • Proficient with hand tools, power tools, and electrical testing equipment., • Strong attention to detail and ability to work at heights., • Commitment to following safety protocols, including PPE, aerial safety, and electrical hazard prevention. PHYSICAL REQUIREMENTS Work is performed outdoors year-round in all conditions, including extreme heat, cold, rain, and other harsh weather. Must be able to stand, climb, bend, kneel, and perform physically demanding tasks for extended periods. Regularly lifts and carries up to 50 lbs. and occasionally up to 100 lbs. with assistance while handling poles, mast arms, equipment, and materials. Must tolerate exposure to dust, noise, vibration, and work at heights in bucket trucks or aerial lifts. TRAVEL REQUIREMENTS May require travel within Texas. Overnight or out-of-town stays may be needed based on project location. PRE-SCREEN Upon offer, employees will be required to complete and pass a pre-employment drug screen. BENEFITS • Best-in-class Medical & Dental Plans, • Vision Insurance, • Voluntary Life Insurance, • Supplemental Accident, Critical Illness, and Short-Term Disability Coverage, • Pet Insurance, • 401(k) Retirement Plan, • Quarterly Bonuses, • Paid Time Off (PTO), • Employee Assistance Program (EAP), • Tuition Reimbursement & Continued Education Programs, • Scholarship Initiatives, • Community Engagement Opportunities, • Company Events & Quarterly State of the Company Meetings E-Z Bel Construction, LLC is an equal opportunity employer. We encourage all qualified individuals to apply, regardless of race, color, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or veteran status.

Job DescriptionDescription: Join Our Team at Austin Emergency Center – South Austin Region! Locations: South Lamar, Riverside, and Mueller Are you looking for an exciting career in emergency medicine? Austin Emergency Center offers a dynamic, fast-paced work environment with top-tier benefits, competitive pay, and amazing incentives! Join a team that values compassion, excellence, and teamwork while providing high-quality emergency care to the South Austin community. Why Work with Us? • Competitive Pay & Shift Differentials, • Sign-On & Retention Bonuses, • Flexible Scheduling Options, • Comprehensive Benefits & 401(k) Matching Summary: The Radiology Technologist will operate radiographic equipment to produce radiographs of body for diagnostic purposes, as directed by the Physician in accordance with the Radiologist accepted protocol. The technologist will also be proficient in the positioning of the patient and examining table to obtain optimum views of specified area of body requested by physician. Technologist will also practice radiation safety techniques with the ALARA principle in mind, using beam restrictive devices, patient shielding skills, and knowledge of applicable exposure factors, to maximize radiation protection to patient and staff. Each Radiology Technologist will operate CAT SCAN equipment to produce Computed Tomography (CT scans) of the body for diagnostic purposes, as directed by the Physician in accordance with the Radiologist protocol. The Radiology Technologist will be responsible for administering and consenting for contrast both IV and oral, while being aware of all possible reactions and side effects. The Radiology Technologist will also be responsible for filling out appropriate paperwork and ensuring proper documentation in patients’ chart. Our Primary goal is to ensure patient safety and satisfaction, while acquiring an acceptable exam of diagnostic quality. The Radiology Technologist will also be responsible for additional patient care duties. This includes, but is not limited to starting IVs, drawing blood, operating lab testing equipment and running patient samples, changing of beds, cleaning of rooms, and also stocking linens. Requirements: EDUCATION & EXPERIENCE • Graduate of an accredited approved school of Radiologic Technology, • At least 2 years of radiologic/imaging experience and CT experience LANGUAGE/MATH/REASONING ABILITY • Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization., • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs., • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situation. COMPUTER SKILLS • Basic computer skills CERTIFICATE/LICENSES • Current State Licensure (Required), • Current BCLS Certification (Required), • Registered with the American Registry of Radiologic Technologists (Preferred)

Job Description Job Title: Commercial AV Technician Location: Austin, TX Pay Rate: $18-$23 Company Summary: Our client is a proven leader in the communications industry, offering a professional level of Integration, Design, and Project Engineering expertise to their partners. Having been around for over forty years, our client provides the resources necessary for their team members to excel and reach their career goals in the communications industry. We are looking for Audio Visual Field Technicians who will hit the ground running, pay attention to detail, and work efficiently under minimal supervision. This will include but is not limited to: • Extensive knowledge with all aspects of AV systems, • Install, troubleshoot, repair AV devices and systems, • Installing/hanging/mounting: displays, projectors, speakers, racks, info plates, • 2+ years experience with configuring, implementing and testing a variety of systems, • 2+ years experience in troubleshooting Crestron, Sony, AMX, Extron, Biamp, ClearOne, QSC Essential Duties and Responsibilities: • Provide experienced install, program, and troubleshooting services of high end Audio/Visual Systems such as video conferencing, presentation, control systems, digital signage, and video walls, • Work with clients to complete final walk through after systems have been thoroughly tested, • Builds and Maintains customer relationships, • Identify opportunities and communicate with sales teams Qualifications: • Good verbal communication, written communication, and presentation skills, • Ability to work independently, • Installer or Technician background a MUST, • Familiar with background in room audio tuning About Us: At Anistar Technologies, we connect individuals from a variety of industries with respected companies, both nationally and internationally. Each day, our Recruiters are presenting our clients with talented industry professionals for their most in-demand positions. To accomplish this, the Anistar staffing team will invest the time to understand your goals, work experiences, and career objectives. To search for other exciting opportunities in your area, visit our website at . Anistar Technologies is an Equal Opportunity Employer and is dedicated to fostering diversity in the workplace. Anistar utilizes E-Verify. Interested Candidates, click “Apply”, or contact the Anistar office at the number listed below. Anistar PAYS YOU for referrals!!!!!!!! If you know any qualified job seekers looking for work, we want to talk with them! Call us to find out more information regarding our referral placement program! Contact: Anistar Technologies PH: (800)-257-5597 Fax: 888-293-5055 #DHO

Job DescriptionBenefits: • Bonus based on performance, • Competitive salary Here at Optimum Care Counseling and Wellness Solutions, our goal is to help our clients use their individual strengths to gain insight into their problems and feel more in control of their lives. We are seeking applicants with Masters in Mental, Behavioral Health and/or in Counseling; we can help you in getting your license and practice your profession by working and by being supervised by us. We are offering flexible hours Monday through Friday from 9:00 am until 9:00 pm and Saturday 9:00 am until 5:00 pm looking for a minimum of 15 to 20 hours worked on a weekly basis. You will provide individual counseling services to children, adults and elderly, remotely in your home office as we are 100% virtual. We use a robust electronic health records system which includes a telehealth platform to see patients virtually. Here at Optimum Care Counseling and Wellness Solutions, you will enjoy the benefit of: • New patient scheduling, • Credentialing, • Advertising, • Collection of co-pays, • Prior authorizations, • Patient relations, • In house prescriber for medication management, • Electronic EHR System, • Phone system ( to protect our personal number from clients to promote boundaries), • Online Fax systemResponsibilities:, • Establish open lines of communication for individuals with mental or emotional issues, • Offer assistance to individuals with mental and behavioral issues, • Provide prevention-oriented, cognitive behavior, dialectical behavioral, or psychoanalysis therapies, • Develop and Implement treatment plans, • Collaborate with our in house Psychiatrist and Psychiatrist Nurse Practitioners, other treatment providers, and placement agencies, • Ensure all documentation is completed in a timely manner, • Complete all online EHR training videos necessary for this position (paid training usually 10-15 hours dependent on provider)Qualifications:, • Previous experience in mental & behavioral health counseling or other related fields a plus, • Excellent written and verbal communications skills, • Ability to build rapport with clients, • Strong leadership qualities, • Masters degree required This is a remote position.

Job Description We are looking for experienced Plumbers to join our team! When a leak affects a customer’s home or business, it affects their livelihood. Homeowners know that when they call American Leak Detection, they have called a company they can trust and the leak will be found. This is truly a service position, meaning you are always serving an internal or external customer, mostly in the Austin, TX area. Your workmanship in this job will make you proud of what you do - helping people! What We Offer: • COVID19 considerations: PPE Provided, • Pay: $20.00 - $25.00 per hour DOE, • Current Journeyman license is Required, • Valid Texas Drivers License - Required, • Previous applicable work experience Required, • Good customer service skills, • Tunnel repair experience Providing leak detection services to inspect and survey systems for the cause and origin of concealed leaks behind walls, under concrete slabs and asphalt, in basements, in landscaping, water intrusion in roofs, irrigation systems, radiant heat systems, and pools and spas. You may also complete water, sewer and specific line location, and utility line location. Duties include going to commercial and residential locations to perform leak detection work on underground piping systems inside and outside buildings, as well as on swimming pools and spas. Locating leaks is also done on sewer systems. All of the leak detection work is done above ground. Various forms of Electronic Leak Detection equipment are used on each job depending on the type of piping needing locating and depths, etc., including infrared camera. Inert gasses and plugs for sealing systems for testing are also used. Other duties may be assigned.

Job DescriptionDescription: $20-22 per hour Field Test Bikers are responsible for testing the condition of the sidewalks with our advanced technology. We will provide the e-Bike for you, what you need to do is show up on time ready to ride safely. Demonstrates ability to safely operate bicycle, truck and trailer Ability to operate technology and data Must be able to demonstrate the ability to ride an eBike Requirements: Must be at least 18 years of age Have a valid DL and be able to pass DOT Physical Ability to pass a drug test and background check Maintain safe operations of e-bike while it collects data for sidewalk conditions

Job Description LAUNCHING HEAD OF OPERATIONS: BASIS Leander Campus! This position reports to the Chief Schools Officer, the Head of Operations, BASIS Leander Campus, will be responsible for all non-academic, operational campus functions. This includes, but is not limited to, financial, facilities and enrollment management for the school site including vendor selection and management, purchasing and accounting, facilities management and technology. This position also serves as the onsite human resources contact, implementing programs designed by central office. This position partners with the Head of School to ensure that the academics are able to meet BASIS standards and manages a small operations staff. Because of the multi-faceted nature of this position, the job includes an intensive onboarding period including hands on training at other BASIS campuses, prior to the opening of the new campus in the fall of 2026. Primary Responsibilities • Oversees the physical operation of the school including security, IT, VOIP, copiers etc. and maintains the schools’ inventory of hardware and software, • Manages the school budget and acts as the on-site bookkeeper keeping an accurate and continuous record of the financial position of the school, in partnership with Central Office accounting department, • Partners with the head of school with decisions regarding salaries and benefits for all personnel, including the evaluation of support staff., • Manages human resource functions for school employees in partnership with the central human resources team, • In accordance with internal controls and procurement requirements, • Researches, evaluates, purchases and manages school services including building maintenance, housekeeping and grounds, • Manages the purchase of all supplies including textbooks and school operating supplies, • Arranges bids and develops specifications for all outside contractual work, • Ensures the safety of personnel and students in their use of the facilities including the scheduling and management of required drills (fire, lockdown, etc.), • Manages the front office and specialized support staff including registrar and records management, • Maintains accurate and complete records of all school assets, • Ensures all new families are effectively onboarded and registered by June, • Responsible for managing all beginning of year efforts, • Entrepreneurial spirit and mindset, • Demonstrated knowledge of management principles and practices, • Excellent oral and written communication skills, • Ability to think analytically and strategically, • Excellent problem solving and negotiating skills, • Ability to work independently with diverse constituents while maintain high professional standards, • Exemplary organizational skills; ability to establish and manage multiple priorities; ability to work under pressure, • Outstanding attention to detail and accuracy, • Patience, flexibility and a sense of humor, • Enjoys working in an environment serving children, • MBA or Bachelor’s in Business Administration or similar degree, • 3-5 years in a financial or purchasing management role, • 2+ years of experience with facilities management, • Preferred experience with HR related functions, • Education management or non-profit management a plus Benefits and Salary: Salary for this position is competitive and dependent on education and experience. BASIS.ed offers a comprehensive benefits package, including medical, dental and vision insurance and a robust 401K plan. Notice of Non-Discrimination: In accordance with Title VI of the Civil Rights Act of 1964, Title IX of the Education Amendments of 1972, Section 504 of the Rehabilitation Act of 1973, the Age Discrimination Act of 1975, Title II of the Americans with Disabilities Act of 1990, the Boy Scouts of America Equal Access Act and applicable state law, BASIS* does not discriminate on the basis of actual or perceived race, color, religion, national origin, sex, age, disability, gender identity or expression, or any other classification protected by law in any of its business activities, including its educational programs and activities which comply fully with the requirements of state and federal law and Title IX. *As used in this policy, the term "BASIS" refers to: BASIS Educational Group, LLC, BASIS Schools, Inc., BTX Schools, Inc., BDC, A Public School, Inc., BBR Schools, Inc., and all affiliated entities.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance BSU Inc. is a dynamic and fast-growing Electronic Manufacturing and Design company. Summary: BSU has an immediate opening for a Stockroom clerk. This position requires good inventory control skills as well as the ability to multitask and to work independently. Job Duties: • Electronic part recognition., • Picking of electrical components needed for production floor., • Inventory Control tasks such as cycle-counting and replenishment of on-hand inventory., • Supporting production by providing kits and electrical parts for electronic board assembly., • Minimal clerical duties may be required, such as generating labels, entering items into the inventory system, entering items onto Excel worksheets, etc., • Maintaining inventory of shipping materials and supplies., • Other duties as assigned. Requirements: • At least 5 years experience in stockroom in a manufacturing environment., • Expected to read and comprehend process documentation., • Expected to communicate well in English both verbally and in written format., • Candidates should be very organized with the ability to keep count of parts., • Experience in Pick/Pack/Ship or assembly/production experience in a light manufacturing and/or warehouse environment is preferred., • Experience with common Manufacturing/Distribution Center tasks such as picking, packing, receiving, stocking, and knowledge of related documents and/or MRP operation preferred, • Experience with BOMs, SOPs, and work instructions is preferred, • High school diploma. ABOUT THE ORGANIZATION We take pride in our people and they take pride in adding value whenever they work with our customers. Our customers include government and not-for-profit organizations as well as businesses ranging from privately held small businesses and startups to multi-national corporations. These customers represent many industries including federal/state government, service, entertainment, instrumentation/testing, manufacturing, distribution, high-tech, and telecommunications. EOE STATEMENT We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, sexual orientation, protected veteran/military status, familial status, domestic violence status, genetic information or any other characteristic protected by law.

Job Description We’re making the world a more walkable place. Through intuitive personal mobility, we make walking faster, more efficient, and more accessible to empower people to choose walking over sitting in traffic. By giving people the ability to Moonwalk, we believe the path forward to a better future is easily reached on your own two feet. Help us advance the world’s fastest shoes by designing, prototyping, and testing reliable and innovative hardware. We want an engineer ready to push the boundaries and one who makes the impossible a reality. We are looking for a work ethic similar to an engineer in Formula One. You must deliver and iterate quickly. We are not here for mediocrity, we are here to create elegant engineering designs. Is it demanding? Sure, but it is also rewarding and fun. We are covered in Wired, CNET, Gizomodo, PCMag and many other tech press. Responsibilities • Create reliable and scalable designs, • Enjoy creating hardware products from brainstorming to final manufacturing DFM and scaling., • FEA simulation of components with particular attention to fatigue, torsion, and bending of both engineering plastics and metals., • Design components for manufacturing and assembling (DFM/DFA)., • Be willing to try new ideas and concessions from a packaging/integration perspective., • Keep a pulse on other products in the space and evolving industry best practices in terms of materials, manufacturing methods, and hardware design, • Troubleshoot problems in manufacturing, assembly, and field use of Moonwalkers., • Mechanical modeling and testing of components., • Experience with designing, manufacturing, troubleshooting, and debugging prototype hardware., • BS/MS/Ph.D. in Mechanical Engineering or a related discipline or equivalent experience., • FEA experience with static, dynamic, and thermal simulation (3+ years in Ansys or similar)., • CAD proficiency (2+ years in Fusion 360 / Solidworks / Inventor, etc.), • Background in scalable DFM / DFA products or deep knowledge in casting, injection molding, and machining., • Gearbox development experience (sintered metal/cut gears)., • Project management and planning., • Rapid prototyping development (from basic models to 3DP and CNC prototypes). Nice to have • Generative design simulation, • Consumer electronics design experience, with a deep understanding of system-level architecture and tradeoffs (mechanical, thermal, manufacturability, power, reliability, cost, etc.), • GD&T, 2D drawing understanding, • Experience designing sealed enclosures for electronics and mechanical systems., • Opportunities for participation in our Employee Options programs, • 401K retirement plan, • Excellent medical, dental, and vision insurance, • Sick and Vacation time (Flex time for salary positions), and Paid Holidays, • Massive Growth Opportunities and a long-term career, • Casual and comfortable work environment

Job Description Should be able to automate benchmarking of networking workloads – expert in Python, Linux systems and should have good knowledge on C & basic networking concepts. Roles & Responsibilities: • Should be able to run benchmarks of networking workloads for performance testing on the latest Arm-based systems and other platforms, • Work to expand capabilities by developing software to automate the deployment and running of these workloads, • Integrate the software into the existing automation framework, • Previous experience in benchmarking and a strong background in software development, especially in Python is a must Skills required: • Expertise in Python, • Experience with Linux systems, • Experience with benchmarking, • Good knowledge of C., • Good knowledge of basic networking concepts., • Experience with DPDK and other networking applications is a bonus., • Capable of working both in teams and independently, should be a problem solver, • Fluent in English language, both written and spoken., • Good communicator, personable and able to work and communicate at a detailed or high level Experience 7-15 years

Job DescriptionAre you ready to make a difference in critical moments? Join our dynamic team as an Emergency Room Registered Nurse (ER RN) and play a vital role in providing compassionate and expert care to patients during their most urgent healthcare needs. Position: Travel Registered NurseLocation: Memphis, TennesseeSchedule: Night 4x12-Hour (19:00 - 07:00)Duration: 13 Week ContractUnit: Emergency Room (ER) What You'll Do:As an integral member of our Emergency Department (ED), you will collaborate with a diverse team of healthcare professionals to assess, stabilize, and treat patients across a wide range of medical emergencies. Your clinical expertise, quick decision-making skills, and ability to thrive in a fast-paced environment will contribute to our mission of delivering exceptional care 24/7. If you are passionate about emergency nursing and dedicated to delivering high-quality patient care, we invite you to explore this exciting opportunity with us. Requirements: • 2 years’ experience with travel or 3 years’ experience with no travel, • Compact or TN License at time of submittal, • Must live at least 100 miles from facility, • COVID-19 Vaccine, • Flu VaccineWhy Join Us:, • Professional Growth: Expand your nursing proficiency and knowledge while experiencing a range of cases and scenarios that enrich your career journey., • Adventurous Opportunities: As a Travel Registered Nurse, you will have the chance to explore diverse locations across the United States. Expand your professional horizons while enjoying the adventure of new environments. Patient Assessment and Triage * Emergency Care * Monitoring and Observation * Collaboration with Healthcare Team * Patient Education * Documentation and Charting * Emergency Preparedness Requirements Authorized to work in the US without sponsorship Do you have your RN License in the State of Assignment or a Compact License? Do you have a min of 2 years experience as a travel nurse or a min of 3 yrs exp. in nursing? This is a travel RN Contract. Confirm you live at least 100 miles from the facility located in 38116 Equal Opportunity Employer Hire Energy provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Requisition #clz77b3pqeitr0pquq6pbow1d

Job Description Aravo Solutions, Inc. is a global leader in third-party risk management, ESG, and vendor lifecycle management solutions. Our cloud-based platform empowers organizations of all sizes, from Fortune 100 to mid-level enterprises, streamline vendor management processes, mitigate risk, and drive strategic decision-making. We provide guidance globally for the most complex third-party networks in the world, helping them manage risk, achieve compliance, and protect their reputations. Join us at Aravo Solutions, where we are passionate about helping companies eliminate corruption and social injustice from their extended enterprises. You will have the opportunity to work alongside industry experts, leverage the latest technologies, and contribute to shaping the future of vendor management! Position Overview: The Aravo product development team places an emphasis on meaningful contribution by all members in a creative, collaborative, and sustainable environment where opportunities for growth, leadership, and recognition abound. The Engineer will enhance and maintain a highly configurable, multi-tenant, enterprise class, SaaS solution that incorporates cross-organizational collaborative workflows, data integration, and a rich user interface built on a complex data model. This role will work primarily on the design and implementation of solutions that integrate with infrastructure, new and existing services, monitoring systems and internal tooling to provide a secure, reliable, supportable platform. Key Responsibilities: • Design, develop, and maintain scalable and supportable services and APIs for a multi-tenant SaaS application., • Manage and improve CI/CD pipelines, Infrastructure as Code (IaC), and configuration management, focusing on engineering efficiencies, quality, and security, to accelerate deployment cycles., • Effectively communicate risk and impact of changes by defining technical requirements through collaboration with stakeholders to understand functional, system, and data requirements., • Drive sustained improvements in our platforms observability to proactively identify issues, improve system health, and reduce incident resolution time., • Contribute to architectural discussion and champion best practices for code quality, security, and operational excellence., • Create and maintain technical documentation for system architecture and operational procedures., • Provide training to team members as needed., • Stay current with industry trends and emerging technologies, proposing and implementing improvements to enhance the SaaS platform. Requirements Qualifications: • 6+ years of hands-on experience building enterprise SaaS Java applications built on top of a spring framework., • Extensive experience with database modeling and concepts; Oracle experience a plus., • Adept at designing solutions in public, private, and hybrid infrastructure models., • Experience with the full software development life cycle, including a strong quality focus, and demonstrable success with design reviews, code reviews, and unit testing., • Leveraging automation tools (CI/CD pipelines, IaC, configuration management) to modernize systems and processes., • Proficiency in utilizing and integrating with modern observability tools for monitoring system health, analyzing trends, and proactive issue detection., • Effective communications skills honed refining requirements and solving complex problems within a collaborative team environment., • The capacity for viewing the big picture while consistently delivering product in a hands-on development position., • Experience using agile software development methodology, • Experience integrating JS UI frameworks., • Experience debugging complex applications in Linux environments., • Ability to quickly come up to speed on a complex technical architecture., • Desire to contribute in a fast-paced, iterative development environment. Preferred Qualifications/Skills/Soft Skills: • Results oriented, product focused, and at ease in an environment requiring the ability to quickly and appropriately prioritize conflicting demands, • Strong analytical skills, and excellent verbal and written communications skills, • High degree of initiative consistently demonstrated by the active ownership of complex problems through their successful resolution, • Team player eager to work closely with, learn from, and mentor others while continually improving self and team, • Innately curious about new technologies and their practical application in a startup environment, • Flexibility and willingness to pitch in and wear more than one hat in a dynamic organization Benefits • 100% Employer Paid Medical Insurance options for the Employee and Family, • Paid Maternity and Paternity Leave, • Life and AD&D Insurance, • Long-Term Disability Insurance, • 401K with Company Matching, • Equity Participation, • 4 Weeks of Vacation, • Fully Stocked Kitchens, • Company-Sponsored Charitable Day of Giving Events

Job Description Thermal Fluids Engineer Interested in getting in at the ground floor of a new, disruptive company attacking an important multi-billion-dollar problem? Businesses and consumers continue to demand increasing data services at an exponential rate -- streaming, deep learning, analytics, loT connectivity, and more. What this means is higher performing CPUs, components, servers, and ultimately Data and Edge computing centers, all generating excessive heat that is increasingly difficult to manage with traditional cooling systems. Accelsius is developing revolutionary direct-to-chip, 2-Phase cooling technologies that empower and enable Server OEMs, Data Centers, Edge Computing Operators, and 5G Edge deployments to meet performance, sustainability, scale, and cost goals while serving this high-growth market for data services. We are seeking a highly skilled Mechanical Engineer with deep experience in refrigerant-based fluid handling systems. This role focuses on the design, development, and integration of refrigerant pumps and fluid control systems for industrial or data center cooling applications. The ideal candidate will bring at least five years of relevant experience, strong 3D modeling skills, and a solid understanding of system reliability and leak control strategies. Key Responsibilities: • Design, develop, and validate data-center scale direct-to-chip 2-phase cooling systems, • Specify and integrate refrigerant pumps, including positive displacement, centrifugal, regenerative turbine, or other appropriate technologies, • Design and implement valving and control systems for refrigerant flow regulation in closed-loop systems, • Collaborate with electrical and controls teams to define automation and control interfaces, • Perform system-level thermal and fluid modeling, pressure drop calculations, and component sizing, • Source, evaluate, and integrate commercial components such as valves, pumps, and fittings, • Bachelor’s degree in Mechanical Engineering or related field, • 5+ years of experience developing refrigerant-based fluid handling systems, preferably in data center or industrial cooling environments, • Hands-on experience with valving and control systems used for refrigerant regulation, • Expertise in 3D mechanical design and modeling, • Proficiency with SolidWorks preferred; other tools such as Creo, NX, or Autodesk Inventor are acceptable, • Familiarity with industrial process control systems and process flow in manufacturing and validation environments., • Strong understanding of thermodynamics, fluid dynamics, and heat transfer principles, • Experience with two-phase refrigerant systems or direct-to-chip liquid cooling, • Experience with leak control devices, containment strategies, and system pressure integrity, • FEA experience for structural, thermal, or flow simulations (e.g., SolidWorks Simulation, ANSYS, COMSOL), • Knowledge of industrial communication/control protocols (e.g., Modbus, BACnet, PLC integration), • Understanding of refrigerant codes and safety standards (ASHRAE, UL, ISO), • Experience in pump testing, flow balancing, and system commissioning What We Offer: • Competitive salary, benefits, and performance-based bonuses, • A chance to work on cutting-edge thermal system technologies, • Collaborative, cross-disciplinary engineering environment The position is based in Austin, Texas. Accelsius does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, veteran status, marital status, or based on an individual's status in any group or class protected by applicable federal, state or local law. Accelsius encourages applications from minorities, women, the disabled, protected veterans, and all other qualified applicants.

Job Description Company Profile: Culligan Ultrapure is a Culligan Water franchise that started in 1962 with and has 28 locations spread across Minnesota, Indiana, Arizona, Missouri, Michigan, and Texas. The company services residential, commercial, and industrial customers with water purification and softening systems. Position Description: As a Household Sales Rep you will be a Residential Water Treatment Consultant, an expert providing a range of top-notch water treatment solutions, from water softeners to safe, healthy drinking water systems. Using a proven methodology, you’ll identify water issues and deliver Culligan Ultrapure solutions that effectively solve them, backed by technical water testing and hands-on demonstrations. You’ll also create and execute a dynamic marketing plan to consistently generate new leads, while maintaining strong conversion rates for company-provided leads. This role offers the perfect blend of technical expertise and customer-focused service, helping you build lasting relationships while driving growth for the company. Why Culligan Ultrapure: We are passionate about caring for employees and our customers. The Residential Water Treatment Consultant position at Culligan Ultrapure is career position that offers a lot of variety and interesting work. We provide an excellent environment to learn, grow, and interact with a variety of great people on daily basis. We will provide you with the training and tools that you will need to be successful. Culligan is an established leader in the water treatment industry and has been providing problem water solutions for over 80 years. When you come to work with us you are becoming part of a team who is customer focused and committed to improving lives of people in the community through providing them with great quality water. Job Qualifications: • BS degree preferred with an emphasis in Sales or Marketing along with 1+ year of sales experience (relevant experience will be considered in place of degree), • Proven track record of residential sales experience is preferred., • Community involvement., • Excellent time management, telephone, and presentation skills., • Ability to work unsupervised., • Ability to obtain Culligan Sales License within 90-days of employment. This is a commission-based position with a recoverable draw. The expected total annual compensation for this role ranges from $75,000 to $125,000, depending on individual performance. * Draw Against Commission: A recoverable draw is provided to support income stability. The draw amount is offset against earned commissions. If commissions exceed the draw, the difference is paid out. If commissions do not exceed the draw, the difference is carried forward and recovered from future commission earnings * Actual Earnings: Actual compensation may vary based on sales performance This compensation plan is designed to offer strong income potential for motivated, high-performing individuals. • Monthly vehicle allowance, • Health insurance, dental, vision, disability, life, insurances plus matching 401k. #LI-AN1

Job Description OUR COMPANY: EOS IT Solutions is a Global Technology and Logistics company, providing Collaboration and Business IT Support services to some of the world's largest industry leaders, delivering forward-thinking solutions based on multi-domain architecture. Customer satisfaction and commitment to superior quality of service are our top business priorities, along with investing in and supporting our partners and employees. We are a true International IT provider and are proud to deliver our services through global simplicity with trusted transparency. WHAT YOU WILL DO: As an Audio Visual Post Sales Systems, you will provide technical oversight from project award through final commissioning. You'll ensure successful delivery by identifying specific needs or processes, including tooling, test documentation, and resource planning. This role supports project managers, field teams, and sales, ensuring technical excellence and customer satisfaction. This role is remote with intermittent travel to client sites or EOS locations for installation support and training. KEY RESPONSIBILITIES: • Provide technical support to Project Managers, Field Implementation Teams, and Sales., • Assist with product testing and remote commissioning., • Review and refine project Scope of Works (SOW) to ensure optimal operation and customer satisfaction., • Approve support documentation for project deployment., • Stay current with system technologies via manufacturer training and partner relationships., • Review and approve technical documents (schematics, rack drawings, layout drawings, IP system details)., • Provide feedback on technical aspects to improve project processes and deployments., • Approve final as-built drawing sets for project close-out., • 8+ years of AV industry design experience., • Degree in a technical discipline or 10+ years of professional AV experience in implementation/system support., • Expertise in key technologies:, • Control: Crestron, AMX, Extron, • Audio: BIAMP, QSC, Polycom, • Video: Cisco, Polycom, QSC, Crestron, Lightware, Teams, Zoom, • AVoIP Design and Deployment, • CTS certification or higher., • Experience managing large projects (Project or Field)., • Strong written and verbal communication skills., • Proficiency in:, • Audio systems design (conferencing, digital sound, public address, event spaces), • Video systems (large format displays, projection, video wall processing), • Control systems (touchscreen, automation, smart building tech), • Video conferencing integration and deployment, • AV infrastructure design and planning, • Flexibility to work across time zones and travel internationally as needed., • CTS-D, CTS-I certifications, • Formal engineering degree, • Experience with AutoCAD, BIM software, • Proficiency in Microsoft Excel, PowerPoint, Visio, • Familiarity with Ease Software, • Certifications in Shure, QSC, Lightware EOS is committed to creating a diverse and inclusive work environment and is proud to be an equal opportunity employer. We invite you to consider opportunities at EOS regardless of your gender; gender identity; gender reassignment; age; religious or similar philosophical belief; race; national origin; political opinion; sexual orientation; disability; marital or civil partnership status or other non-merit factor. Pay Range$120,000—$130,000 USD

Job DescriptionJOB DESCRIPTION: Job Title: CAPPS/PeopleSoft FSCM Business Analyst Location: Austin, TX (Initially Remote) Duration: 12+ Months Summary: Seeking a Business Analyst with 8+ years of experience in PeopleSoft FSCM 9.2, particularly in Accounts Receivable and Billing. The role requires strong skills in requirements gathering, fit/gap analysis, and system integration testing with third-party interfaces. Mandatory Skills: PeopleSoft FSCM 9.2 Accounts Receivable & Billing modules Fit/Gap analysis & requirements gathering Integration testing Microsoft O365 (Word, Excel, Visio, etc.) MS Teams in large team environments Preferred Skills: Public sector experience Texas CAPPS Financials PeopleSoft AWE SharePoint, Jira, STAT Scrum/Agile experience Work remote temporarily due to COVID-19.

Job DescriptionDescription: Summary: The Test Engineering Manager innovation and provides training and technical guidance to all levels of the business and participates with all business areas and customers to deliver expertly tested products on time and on budget. Responsibilities: • Develop and execute test plans: Create comprehensive test plans for RF systems and components., • Perform RF testing: Use advanced test equipment such as spectrum analyzers, network analyzers, and signal generators., • Analyze test data: Provide detailed reports on performance, quality, and reliability., • Troubleshoot and debug: Identify and resolve issues in RF systems and components., • Collaborate with design engineers: Work closely with design teams to ensure products meet performance standards. Train and mentor lower level engineers and technicians., • Support new product development: Lead the test engineering function for new product and R&D projects from product concept to launch., • Maintain test equipment: Calibrate and maintain test equipment to ensure accurate measurements., • Develop automated test scripts: Improve testing efficiency through automation., • Lead company-wide test automation initiatives: Work with counterparts throughout engineering and production to develop and implement world-class test automation hardware and software solutions. Requirements: • Bachelor degree in Electrical Engineering, Radio Frequency, or related field of study., • Applicable experience in lieu of a Degree may be considered., • Ten (10) years or more of experience in RF, test measurement, and high power amplifiers up to 10 kW., • Preferred LabVIEW, Microsoft Visual Studio C, C#, C++, VB.net or any other programming languages. Database knowledge, SQL, Pspice, or equivalent., • This position requires access to technology, materials, software or hardware that is controlled by either ITAR or EAR U.S. export laws. As a condition to this job offer, in order to be employed in this position, you must be able to obtain an U.S. Government export license(s), as required by law.

Job DescriptionESP is looking for experienced (5+ years), results-driven, and enthusiastic person to lead and support proposal development. You will join a supportive team of marketing professionals that support ESP’s qualification-based selection (QBS) for federal, state, and municipal agencies. • Do you love helping left-brained people communicate right-brained ideas?, • Do you enjoy working collaboratively with a talented group of people?, • Do you thrive in a fast-paced, deadline driven environment?, • Is life/work balance important to you? Working with our firm’s department managers, professional/technical staff, and other marketing team members, you will guide and develop compelling and complex proposal documents and shortlist presentations from initial kick-off and strategy through document design, development, technical review, and production. Ideal Qualities: • Prior experience in the A/E/C industry is a significant plus, specifically, experience in land development, • Associate or Bachelor degree (studies in Marketing, Communications, Design, Journalism, English, or similar studies is a great fit), • Experience in the Adobe Suite is a MUST, especially InDesign – be prepared to submit portfolio/work samples in original format, • Experience with Customer Relationship Management (CRM) is preferred, specifically, Unane If this sounds like a good fit for you – let’s talk! Corporate Information: ESP is a multi-discipline engineering design and consulting firm providing our clients with civil engineering, surveying, planning/landscape architecture, geosciences, environmental, subsurface utility engineering, and construction engineering inspection. Through years of dedicated service to our clients, ESP has received a designation of 195 on the 2025 ENR Top 500 Design Firm rankings. For the firm's primary territory, the ENR Texas & Southeast Top Design Firms, ESP received a 2025 ranking of 52. ESP offers an excellent employee benefits package including: • Competitive compensation with yearly performance reviews and discretionary annual bonuses, • 401(k) (Traditional & Roth plans) with a guaranteed employer match of 100% up to the first 3% and 50% on the next 2% (eligibility after 60 days), • PTO (Paid Time Off) & 10 Paid Holidays, • Tiered Health, Vision & Dental Insurance Options (eligibility after 30 days), • Behavioral Medicine through Teladoc, • Short-Term Disability Insurance, • Long-Term Disability Insurance, • Life Insurance, • Pet Insurance, • Education Reimbursement Opportunities, • Flexible and Dependent Benefits Plan

Job Description Engineering Technician 2 Description: • The Sample Loaner Pool Coordinator role manages the day-to-day operations of the Sample Loaner Pool., • This includes product intake, product information collection and update to asset database, FW updates review of loaner sample request, packaging and shipping of samples, follow-up with overdue samples, processing of returned sample products, answers shipping questions., • The role will also require testing of FIO scripts and various SSD Power States to measure performance and power. Duties:, • Supports engineering activities such as design, test, check-out, modification, fabrication, and assembly of prototype electro-mechanical systems, experimental design circuitry, or specialized test equipment., • Applications may include analog, digital and/or video circuits and logic systems., • Works from schematics, diagrams, written, and verbal descriptions, layouts or defined plans to perform testing, checkout, and trouble-shooting functions., • Performs operational test and fault isolation on systems and equipment., • Assists in determining methods or actions to remedy malfunctions., • Assists in the design, construction, test, and check-out of test equipment., • Uses manufacturing, test, development, or diagnostic equipment, including, but not limited to, test programs oscilloscopes, signal generators, and specialized test apparatus. Required, • 3-5 years of experienceCompensation:, • $26.24 – 31.72/hr W-2

Job Description Role: * • Full analysis of the existing infrastructure (architecture, technologies, and dependencies), • Lead and mentor the engineering team (creating a positive culture/work atmosphere), • Develop/streamline relevant processes for software development, deployment, and testing., • Create processes for deployment, monitoring, and enhancements., • At least 5+ years of proven experience leading software development teams (mentoring and developing talent), • Comfortable working with both technical and non-technical stakeholders, • Strong technical proficiency in Microsoft Azure, Angular Js, .NET/C#, MS Sql Server, • Strong time management skills, • Experience developing unique solutions to technical challenges

Job Description 📢 Now Hiring: Systems Analyst 3 (PeopleSoft FSCM 9.2) Location: Hybrid – Must be local to the Austin, TX area (within 50-mile radius) Schedule: 07/01/2025 – 08/31/2025 (with potential for extension) Work Authorization: US Authorized Candidates Only (no C2C through consulting firms) Interview Format: Microsoft Teams Video We’re seeking a seasoned Systems Analyst to support an enterprise-level implementation of PeopleSoft FSCM 9.2, with a strong emphasis on Accounts Receivable and Billing modules. This role is ideal for a hands-on analyst who excels at gathering complex requirements, leading fit/gap analysis, and executing end-to-end system integration testing with third-party systems. 💼 Key Responsibilities: * Collaborate with SMEs to define requirements and analyze business needs * Lead fit/gap analysis for PeopleSoft FSCM modules * Conduct hands-on system integration testing * Support configuration and approval workflows * Participate in Agile ceremonies and maintain documentation ✅ Required Experience: * 8+ years as a Business Analyst with PeopleSoft FSCM 9.2 * Deep experience with Accounts Receivable and Billing implementations * Proven ability in requirements gathering and fit/gap analysis * Strong integration testing experience * Proficient with Microsoft O365 (Word, Excel, PowerPoint, Visio) * 2+ years working in MS Teams with large teams ⭐ Preferred Experience: * Public sector experience (federal, state, or local government) * Familiarity with Texas CPA CAPPS Financials * PeopleSoft AWE, SharePoint, Jira, Scrum framework, STAT 💲 Pay Rate: * W-2: $65 – $70/hr (target), up to $80/hr max * 1099: $78 – $84/hr (target), up to $96/hr max If you bring deep PeopleSoft knowledge, a sharp analytical mindset, and thrive in collaborative environments, we’d love to connect with you. 🎯 Apply now to be considered for a July 1st start!

Job Description ESP is currently seeking a Project Manager with experience in geotechnical engineering to join our Texas team. This is an excellent opportunity to continue to advance your career with a well-established firm! Responsibilities: • Project Management duties to include:, • Project scoping, • Proposal preparation, • Coordination and executing field investigation and laboratory testing,, • Engineering analyses, • Report writing, • Consultation, • Invoice preparation, • Shallow and deep foundation analyses, • Pavement design and analysis, • Slope stability analysis, • Settlement analysis, • Bachelors or master’s degree in a related discipline. Master’s in geotechnical preferred., • Professional Engineer (PE) registration is preferred, or the ability to obtain within 6 months of employment. If registered in other states than Texas, must have the ability to obtain reciprocity in Texas within 6 months, • 5+ years of experience is preferred, • Strong written/verbal communication skills, • Candidate must be able to pass a drug screen, background check, and have a satisfactory driving record in accordance with the company’s driving (MVR) policy. Corporate Information: ESP is a multi-discipline engineering design and consulting firm providing our clients with civil engineering, surveying, planning/landscape architecture, geosciences, environmental, subsurface utility engineering, and construction engineering inspection. Through years of dedicated service to our clients, ESP has received a designation of 195 on the 2025 ENR Top 500 Design Firm rankings. For the firm's primary territory, the ENR Texas & Southeast Top Design Firms, ESP received a 2025 ranking of 52. ESP offers an excellent employee benefits package including: • Competitive compensation with yearly performance reviews and discretionary annual bonuses, • 401(k) (Traditional & Roth plans) with a guaranteed employer match of 100% up to the first 3% and 50% on the next 2% (eligibility after 60 days), • PTO (Paid Time Off) & 10 Paid Holidays, • Tiered Health, Vision & Dental Insurance Options (eligibility after 30 days), • Behavioral Medicine through Teladoc, • Short-Term Disability Insurance, • Long-Term Disability Insurance, • Life Insurance, • Pet Insurance, • Education Reimbursement Opportunities, • Flexible and Dependent Benefits Plan, • Referral Bonuses

Job DescriptionSalary: $80,000+ Jetvia recognizes our greatest asset, our team members. Its their diversity of experience, professionalism, and ideas that create an outstanding work environment, building the foundation of an efficient team atmosphere. Jetvia is looking for a full time SIC for one of our aircraft in Austin, Texas. Must have previous Learjet 35/55 Experience. Relocation Allowance Provided! Must live within 60 minutes drive of Austin, Texas. • At least 8 hard days off per month. MINIMUM REQUIREMENTS: • First-class medical certificate., • LRJET Type Rating, • Minimum 1,000 hours total time, 200 multi-engine time., • Well organized and detail-oriented with an ability to multitask., • Excellent time management and customer relation skills. PREFERRED REQUIREMENTS: • 2,000 hours total time, 1,000 multi-engine time., • LRJET Type Rating with 300 hours LRJET 60 time., • Previous Part 91/135 operational experience as Pilot in Command. BENEFITS • Competitive Pay, • Company provided iPads with ForeFlight Performance, • Complete Insurance Coverage Medical, Dental, Vision, Life., • IRA /401k with Profit Sharing., • Annual bonuses POSITION RESPONSIBILITIES • Conducts flight planning, reviews weather conditions at destination, en route, and at alternate airports., • Calculates and reviews aircraft weight and balance, fuel planning, and performance data., • Ensures pre-flight inspections are performed., • Complies with schedules and other directives governing aircraft operation., • Serves as Second in Command, • Coordinates and monitors the functions of all assigned crew members., • Represents ATI Jet when dealing with executive clients and other charter operators., • Perform other duties as assigned. Jetvia provides safe and courteous executive jet charter service to a wide variety of clients throughout the world. Professionalism, great customer relations, and courteous service are key elements needed to meet our goals of safety, excellent passenger service, and on-time operations. Jetvia is an equal opportunity employer and reviews applicants without regard to race, color, religion, sex, age, national origin, handicapped, or veteran's status. Employment with Jetvia is contingent upon pre-employment drug testing, background checks and post-offer, job-related physicals (when applicable). Employment will be conditioned upon a negative result of this test. If the applicant tests positive for illegal drugs, the offer of employment will be withdrawn.

Job Description Join SADA as a Senior Artificial Intelligence Architect Your Mission As a Senior Artificial Intelligence Architect at SADA, you will work in a fast-paced, highly-skilled team developing state-of-the-art enterprise solutions using a wide variety of artificial intelligence technologies. You will work directly with customers, engineers, sales teams and partners to deliver high quality professional service engagements to SADA's customers. SADA is a premier partner of Google Cloud Platform (GCP), and as such, your implementations will focus on enabling customers to best utilize GCP or to demonstrate its capabilities. You will be responsible for building cloud-native artificial intelligence solutions using Google's Vertex AI platform and all related technologies, such as Gemini large language models, Vertex AI, LangChain, Agent Development Kit, Vector Search and more. You may also be responsible for implementing domain-specific solutions such as Vertex AI Search for Retail or Contact Center AI Platform. This is a hands-on role that will include both architecting and implementing AI solutions. Artificial intelligence is an extremely dynamic and quick-changing discipline. Therefore, your approach for learning new technology will be as important as any prior knowledge. We are looking for a "professional tinkerer" with a passion for continuous learning and a knack for problem solving. Someone that learns fast and pivots even faster. That always says "I'll figure it out" instead of "I don't know." Your day-to-day will consist of the following activities: • Implementing AI–based solutions for SADA clients across all project stages, from discovery and architecture, to development, testing and launch, • Providing subject matter expertise and assistance to SADA clients and colleagues on artificial intelligence topics, • Collaboration with client stakeholders managing the project, including other engineers and Director-level client resources, • Creating technical documentation and leading solution design discussions Customer-Facing - Daily interactions with customers, including standups or sales meetings; at other times, weekly/bi-weekly as for sprint planning, reviews/retrospectives, or demos. These interactions will be with roles ranging from engineers to key executive stakeholders. Travel - Up to 35% travel to customer sites, conferences, and other related events. Job Requirements Required Credentials: • One of the following (within 90 days of hire):, • Google Professional Machine Learning Certification, • 4+ years of relevant work experience in technical consulting, software development or cloud engineering, • 1+ years of relevant work experience designing and implementing Generative AI solutions, including the use of large language models, model fine tuning, vector embeddings, and AI application frameworks to build retrieval augmented generation and multimodal workloads, preferably using Vertex AI on GCP, • Strong consultative skills, including the ability to translate complex AI concepts into actionable business strategies and solutions, • Ability to communicate complex technical concepts to a broad range of internal and external stakeholders, • Expertise in development using Python, and familiarity with other programming languages such as JavaScript, Go or Java, • Comfortable developing with frontend web frameworks such as Streamlit, Gradio or React, • Experience designing and implementing serverless and containerized solutions on common deployment runtimes, preferably Cloud Run, Google Kubernetes Engine, or Vertex AI on Google Cloud Platform, • Experience building and maintaining high-quality, developer-friendly server-side code, such as webhooks, cloud functions, and data pipelines, • Experience with full stack development, including setting up cloud infrastructure, database services and application lifecycle management, • Ability to architect, scope, and prioritize work based on feedback from the customer or internal teams., • Experience working with analytical and transactional database systems, including SQL databases like MySQL, PostgreSQL or BigQuery, • Experience participating in sales calls, • Exposure to containers and container orchestration, such as Docker, • Experience working with interactive development environments like JupyterLab and Vertex AI Workbench, • Exposure to model serving frameworks such as LLM and FastAPI and model training frameworks such as PyTorch and TensorFlow, • Experience in writing automated tests, including unit, integration, and acceptance tests, • Experience monitoring and scaling workloads based on latency or throughput demands About SADA An Insight company Values: SADA stands for inclusion, fairness, and doing the right thing. From our very beginning, we've championed a diverse workplace where we support and learn from each other, amplifying the impact we make with our customers. We're proud that our teams are composed of contributors who represent a wide array of backgrounds, experiences, abilities, and perspectives. We are an equal opportunity employer. Our three core values are the foundation of everything we do: • Hunger, • Heart Benefits: Unlimited PTO, paid parental leave, competitive and attractive compensation, performance-based bonuses, paid holidays, generous medical, dental, vision plans, life, short and long-term disability insurance, 401K/RRSP with match, as well as Google-certified training programs and a professional development stipend. Business Performance: SADA has been named to the INC 5000 Fastest-Growing Private Companies list for the last 10+ years in a row, garnering Honoree status. CRN has also named SADA on the Top 500 Global Solutions Providers list for the past 5 years. The overall culture continues to evolve with engineering at its core: 3200+ projects completed, 4000+ customers served, 10K+ workloads, and 30M+ users migrated to the cloud. To request reasonable accommodation to participate in the job application or interview process, contact . SADA complies with federal and state/provincial disability laws and makes reasonable accommodations for applicants and candidates with disabilities.

Job Description Instructional Designer Responsibilities • Partner with internal team members and SMEs to translate business objectives into learning solutions and ensure all materials are instructionally sound, • Create learning programs that include product information, sales, and customer service strategies, • Design training documents that allow our employees to have maximum success, • Develop the testing strategies to measure and assess effectiveness of the curriculum and learner performance., • Take results and implement them back into new and existing course content as needed.Qualifications, • 2+ years of experience designing training materials, • Bachelors or Masters Degree in Instructional Design, Educational Psychology, or equivalent preferred., • Must have experience with eLearning tools such as Articulate Storyline/Rise, • Excellent verbal and written communication skills., • Excellent organizational skills and detail orientation, • You are reliable & can follow directions, • Experience using Microsoft Office and Google Apps.

Job Description Experience The EMBREY Way by joining our dynamic Property Management team as a Maintenance Supervisor at Arboretum Oaks. As a Maintenance Supervisor, you will contribute to increasing retention rates and occupancy percentages by maintaining and improving the physical property. Responsibilities • Ensure compliance within the maintenance team., • Improve processes and find efficiencies in workflow., • Troubleshoot and implement cost-saving techniques and recommend improvements., • Lead in the management, training and retention of quality employees., • Consistently review pending work orders and allocate them appropriately., • Maintain monthly and yearly budget overages., • Facilitate property maintenance issues, including scheduling regular maintenance and repair, negotiating contracts with vendors and conducting property inspections., • Review turns and make-ready schedule and delegate work to proper work groups. Qualifications • Proven experience in Property Maintenance, • Experience utilizing Yardi, preferred, • Three years’ experience as a Manager/Supervisor, • HVAC certified, • Pool certification, • High school diploma or equivalent, preferred, • Valid Driver’s License Required Testing • Criminal Background Check, Non-DOT Testing, MVR Position Type • Hourly Rate - Non-Exempt, Based on Experience, • Full-time, • Competitive pay & benefits (including healthcare & 401k) Position Location • Austin, TX; Reporting: direct to Community Manager. Choose EMBREY: Join an industry-leading team where we believe our people are our most important investment. That’s why we’re committed to fostering a strong, value-driven culture through a long-term strategic focus on our team. We were recently recognized as one of the Best Places to Work by the San Antonio Business Journal, a reflection of the environment we’ve built together. By joining our team, you'll become part of an empowering workplace that values dedication, encourages growth and celebrates teamwork. Enjoy the perks of a salaried/exempt position with competitive pay and bonus. We have an extensive benefits package, including healthcare (medical, vision, dental), wellness activities, short and long-term disability, life and AD&D, parental leave, PTO (Paid Time Off) and a 401(k) match. Who We Are: San Antonio-based EMBREY is a vertically integrated real estate investment company that develops, builds, acquires, owns, and manages multifamily communities and commercial assets in select markets throughout the United States. With over 50 years in business, more than 6,000 units under construction, and nearly 14,400 units under management, EMBREY does more than build places to work and live. We design the experience, and together as ONE EMBREY, we deliver exceptional results. Our Values: Do the Right Thing - Details Matter - Rise to the Challenge - Own it EMBREY is an equal-opportunity employer and value diversity and inclusion in our workforce. We do not discriminate based on race, color, religion, sex, national origin, age, disability or any other protected status. Our commitment is to provide a fair and inclusive hiring process. All employment is decided on the basis of qualifications, merit and business needs.

Job DescriptionJob Title: Electromechanical TechnicianJob Description Are you mechanically inclined and seeking a foot in the door with an exciting, innovative, tech-forward company? Join a team that serves a purposeful mission with an incredible breakthrough, high-tech industrial product. The Electromechanical Technician will conduct factory acceptance testing (FAT) and commissioning of the company's primary industrial product line. Responsibilities • Troubleshoot, test, and validate electromechanical assemblies, controls, and wiring harnesses., • Identify and resolve electrical, mechanical, and control issues with minimal supervision., • Implement improvements and ensure issues are properly documented., • 5+ years of experience in electromechanical assembly and troubleshooting., • Strong understanding of industrial automation, robotics, and control systems., • Skilled in wiring, mechanical repair, and system-level debugging., • Experience with software tools for control system diagnostics (PLC/HMI/etc.)., • Ability to read electrical and mechanical schematics., • Ability to write and improve manufacturing assembly work instructions for hardware and electrical systems., • Experience with mechanical systems such as pumps, motors, gears, air compressors, and pressure vessels., • Experience in a manufacturing environment., • Experience with high-current, high-voltage, or high-amperage wiring systems., • Associate's Degree in mechanical engineering technology, mechatronics, electronics technology, or related field., • Experience with Beckhoff Twincat PLC systems., • Ability to work standing, kneeling, or on ladders., • Proficient in Microsoft applications. Experience the cutting-edge, urban, and modern start-up company feel with a breakthrough product and purpose. This is a challenging and exciting environment with a positive and team-oriented company culture. The company's growth could allow for more hours and opportunities to learn and advance as the company expands. This is a great opportunity for someone who is a go-getter and flourishes in a dynamic, ever-changing work environment to get in at early stages and have the ability to solve problems, be a part of big solutions, process roll-outs, and advance. Work Environment Enjoy working in a climate-controlled assembly shop and corporate headquarters offices from Monday to Friday, 8 am-5 pm. You will be surrounded by friendly, driven, passionate people dedicated to the mission the company serves. Job Type & Location This is a Contract position based out of Austin, Texas. Pay and Benefits The pay range for this position is $35.00 - $45.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Austin,TX. Application Deadline This position is anticipated to close on Sep 25, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Controls Engineer - Automation Engineer - Electrical Engineer to $120,000 - Direct Hire - Permanent - Full Time - In House - Good Benefits – Career Growth Apply Now – | f 484-844-3837 attn. Chuck Winter • Bachelor’s Degree in Electrical Engineering, Electronics Engineering or closely related Engineering Discipline, • Strong Siemens Step 7 ( S7 ) PLC programming, and testing experience and ability in automated manufacturing 2+ years of Controls Engineering experience Strong PLC programming skills (Allen Bradley/Rockwell, Keyence, Panasonic, others) Proficient in RsLogix/Studio5000, AutoCAD, MS Office, FactoryTalk View Strong Mechanical Aptitude Experience controlling sensors, actuators, pneumatics, stepper/servo motors, VFD drives Strong oral and written communication skills Knowledge of NEC, UL, NEMA, CE, NFPA 79, PMMI, and relevant ISO/EN standard Controls engineer, ab, Allen Bradley, servo, automation engineer

Job Description About Us One Medical is a primary care solution challenging the industry status quo by making quality care more affordable, accessible and enjoyable. But this isn't your average doctor's office. We're on a mission to transform healthcare, which means improving the experience for everyone involved - from patients and providers to employers and health networks. Our seamless in-office and 24/7 virtual care services, on-site labs, and programs for preventive care, chronic care management, common illnesses and mental health concerns have been delighting people for the past fifteen years. In February 2023 we marked a milestone when One Medical joined Amazon. Together, we look to deliver exceptional health care to more consumers, employers, care team members, and health networks to achieve better health outcomes. As we continue to grow and seek to impact more lives, we're building a diverse, driven and empathetic team, while working hard to cultivate an environment where everyone can thrive. Employment type: • Managing a patient panel with a broad array of patient needs; conducting a mix of acute, chronic, and well visits, • Treating patients in-office or in testing centers as well as conducting occasional tele-health visits, • Continuous learning during weekly Clinical Rounds and through other modalities, • Ongoing collaboration with in-office teammates via daily huddles, as well as with virtual clinical teams, • Utilization of your specific clinical training and opportunities to perform in-office procedures, • Enrolled in, or have completed, an accredited Family Medicine or Medicine/Pediatrics residency program, • Practiced at least 2 of the last 5 years in an outpatient primary care setting seeing all ages (0+), • Board certified in Family Medicine or Medicine/Pediatrics, or Board Eligible with plans to obtain board certification within 1 year of your One Medical start date, • A passion for human-centered primary care, • The ability to successfully communicate with and provide care to individuals of all backgrounds, • The ability to effectively use technology to deliver high quality care, • Clinical proficiency in evidence-based primary care, • The desire to be an integral part of a team dedicated to changing healthcare delivery, • An openness to feedback and reflection to gain productive insight into strengths and weaknesses, • The ability to confidently navigate uncertain situations with both patients and colleagues One Medical offers a robust benefits package designed to aid your health and wellness. All regular team members working 24+ hours per week and their dependents are eligible for benefits starting on the team member's date of hire: Taking care of you today • Paid sabbatical for every five years of service, • Free One Medical memberships for yourself, your friends and family, • Employee Assistance Program - Free confidential services for team members who need help with stress, anxiety, financial planning, and legal issues, • Competitive Medical, Dental and Vision plans, • Pre-Tax commuter benefits, • 401K match, • Credit towards emergency childcare, • Company paid maternity and paternity leave, • Paid Life Insurance - One Medical pays 100% of the cost of Basic Life Insurance, • Malpractice Insurance - Malpractice fees to insure your practice at One Medical is covered 100%., • UpToDate Subscription - An evidence-based clinical research tool, • Continuing Medical Education (CME) - Receive an annual stipend for continuing medical education, • Rounds - Providers end patient care one hour early each week to participate in this shared learning experience One Medical participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Please refer to the E-Verification Poster and Right to Work Poster for additional information.

Job Description Pay: $90,000.00 per year We are seeking a skilled Mechanical Engineer with 3–5 years of experience in designing and implementing liquid cooling solutions for servers, computers, and data center environments. This role focuses on liquid-to-liquid and liquid-to-air cooling systems, requiring expertise in thermal management, heat transfer, fluid dynamics, and electro-mechanical design. The ideal candidate will have hands-on experience with pumps, manifolds, cold plates, and heat exchangers and a proven track record of developing solutions that support high-volume production environments. This position offers the opportunity to help shape next-generation computing infrastructure, including high-performance computing clusters and hyperscale data centers, through innovative, energy-efficient designs. Key Responsibilities: • Design and develop liquid-to-liquid and liquid-to-air cooling systems for high-density servers, GPUs, CPUs, and supporting IT hardware., • Perform thermal modeling, CFD simulations, and fluid flow analysis to evaluate pressure drop, system efficiency, and thermal performance using tools such as ANSYS Fluent, SolidWorks Flow Simulation, or COMSOL., • Create detailed CAD models, technical drawings, and specifications for complex electro-mechanical and fluid-handling assemblies., • Collaborate with hardware, electrical, and systems engineering teams to integrate cooling systems effectively into rack-level and facility-level architectures., • Oversee prototype development and validation testing, ensuring reliability, efficiency, and compliance with internal and industry standards., • Work with manufacturing teams to create designs optimized for scalability and high-volume production, maintaining performance and cost efficiency., • Conduct root cause analysis and troubleshooting for cooling issues during testing, production, or field operations., • Document all designs, simulations, test data, and lessons learned for engineering and customer reference., • Support customer engagements and design reviews, providing technical expertise to showcase engineering solutions and value., • Bachelor’s degree in Mechanical Engineering (Master’s preferred)., • 3–5 years of experience in thermal management or liquid cooling systems for servers, data centers, or other high-power electronics., • Proficiency with 3D CAD tools (SolidWorks, Creo) and simulation software (ANSYS Fluent, COMSOL, Icepak)., • Strong understanding of thermodynamics, fluid dynamics, and heat transfer principles., • Experience working with electro-mechanical systems consisting of fluids and pumps., • Experience designing solutions supporting high-volume production environments for complex electro-mechanical, fluid-based products and assemblies., • Knowledge of material compatibility, sealing methods, and system reliability in fluid-based environments., • Background in liquid-to-liquid and liquid-to-air cooling specific to data center and high-performance server applications., • Familiarity with rear-door heat exchangers, cold-plate designs, and rack-level integration strategies., • Knowledge of ASHRAE data center cooling guidelines, Green Grid standards, and other industry regulations. We pride ourselves on our diverse and inclusive workplace, where every team member is driven by a shared commitment to innovation, quality, and excellence. If you have a relentless drive to succeed and a passion for pushing boundaries, we want you on our team! Bring your unique talents and join us in shaping the future of technology today!Join the Revolution in Technology!\r\nBe part of one of the fastest-growing sectors in the world—where innovation meets impact! Our work touches every semiconductor chip found in smartphones, smart cars, and cutting-edge AI devices. As the semiconductor industry undergoes transformative changes, we are at the forefront, adapting and evolving to meet new challenges.\r\n\r\nWe pride ourselves on our diverse and inclusive workplace, where every team member is driven by a shared commitment to innovation, quality, and excellence. If you have a relentless drive to succeed and a passion for pushing boundaries, we want you on our team! Bring your unique talents and join us in shaping the future of technology today!

Job Description IEC 62304 Quality Specialist (Design Assurance Engineer) No C2C. Fulltime permanent role (no sponsorship). Note: non-medical device industry exp application will NOT be considered. Overview We are looking a highly skilled IEC 62304 expert as Software Quality Engineer to work in Austin, TX (Onsite). MUST Have: hands-on experience with • IEC 62304 (Medical Device Software Life Cycle Processes), • ISO 14971 (Risk Management for Medical Devices), • ISO 13485 (Quality Management Systems) Key Responsibilities • Ensure full compliance with global medical device regulations and standards, including: 1. IEC 62304 (Medical Device Software Life Cycle Processes), 2. ISO 14971 (Risk Management for Medical Devices), 3. ISO 13485 (Quality Management Systems), 4. FDA 21 CFR Part 820 (Quality System Regulation), 5. 21 CFR Part 11 (Electronic Records and Signatures), 6. Cybersecurity guidance for medical devices (e.g., FDA premarket guidance, AAMI TIR57/97, etc.) • Review, maintain, and improve Quality System procedures and work instructions governing software development, validation, and lifecycle management for embedded, standalone, and cloud-based medical device software., • Partner closely with cross-functional teams including R&D, Systems Engineering, Regulatory Affairs, Manufacturing, and Clinical teams to ensure that software development activities are fully integrated with design controls and compliant with applicable standards., • Review and approve software design documentation, including: 1. Software Development Plans, 2. Software Requirements Specifications (SRS), 3. Software Architecture and Design Documents, 4. Risk Management documentation (including Software Failure Modes and Effects Analysis), 5. Verification and Validation protocols, test plans, test cases, and reports. • Conduct software quality audits and assessments to ensure compliance with internal processes, SOPs, and applicable regulatory requirements., • Actively participate in software risk management processes, facilitating hazard analyses, failure mode assessments, and risk mitigations throughout the product lifecycle., • Provide oversight and review of process validation protocols for software systems used in manufacturing, testing, installation, service, and support of medical devices., • Support regulatory submissions including 510(k), PMA, CE Technical Files, and international regulatory dossiers, ensuring complete and compliant software documentation., • Participate in usability testing, clinical lab evaluations, cadaveric labs, and design validation activities to ensure software meets intended use and user needs., • Provide expert guidance to teams during internal and external audits (e.g., FDA inspections, Notified Body audits, MDSAP audits)., • Assist in design transfer activities to ensure smooth transition from product development to manufacturing with appropriate validation of test methods, process controls, and inspection methods., • Bachelor’s degree in Software Engineering, Computer Science, Biomedical Engineering, Electrical Engineering, or related technical discipline. Master’s degree preferred., • Minimum 5+ years of hands-on experience as a Software Quality Engineer in the medical device industry (Class II and/or Class III devices preferred)., • In-depth knowledge of design controls, risk management, and software lifecycle processes specific to regulated medical devices., • Demonstrated experience with IEC 62304-compliant software development and verification/validation processes., • Strong working knowledge of ISO 14971, ISO 13485, 21 CFR Part 820, and current FDA guidance documents related to software in medical devices., • Prior experience supporting 510(k), PMA, EU MDR, or other international regulatory submissions for medical device software., • Ability to collaborate effectively with cross-functional teams and communicate quality requirements clearly to both technical and non-technical stakeholders., • Excellent written, verbal, and interpersonal communication skills., • Experience with connected medical devices, or software as a medical device (SaMD)., • Familiarity with cybersecurity frameworks applicable to medical device software., • Experience with cloud-based or mobile medical applications., • Direct interaction with FDA, Notified Bodies, or MDSAP auditors during inspections.

Job Description The Staff Engineer (Forensic) will perform site investigative evaluations and understand civil/structural testing data to determine the root cause of structural engineering and building envelope failures. He/She will take a hands-on approach to engineering by recording observations, performing/witnessing testing, and writing his/her unbiased findings into a detailed report. This role will require continuous learning in a team-focused environment. The ideal candidate will be located in Austin, TX, but we will also consider candidates in San Antonio, Dallas or Houston. Essential Functions • Performs investigations and assessments regarding the design, construction, and standard of care associated with planned improvements and the built environment involving geotechnical engineering, soil-structure interactions, structural systems, civil sitework, exterior cladding systems, building envelopes (moisture and thermal), peril damage, and personal injury., • Evaluates single-family residences, multi-family apartment/condominium complexes, commercial facilities, warehouses, institutional facilities, and industrial facilities as well as ancillary structures such as retaining walls, screen walls, and swimming pools., • Documents facts and gives a thorough and complete report on all related findings, • Performs technical research as needed to support investigation., • Applies engineering theory, education, and previous work knowledge to real world situations, • Prepares precise and unbiased written reports of complex findings for site investigations based on field inspections and research on a timely basis., • Consistently meets all required company expectations and deadlines, particularly during heavy workload., • Consistently and effectively communicates with engineering team daily., • Meets with clients as needed to review findings and make recommendations, • Bachelor’s Degree in Structural/Civil/Geotechnical Engineering (MSCE preferred), • 5+ years of experience in structural engineering and/or forensics engineering, • Self-motivated with the ability and desire to deliver excellent client service, • Registered Professional Engineer in Texas (NCEES record preferred), • Strong written and verbal communication skills, • Possess valid driver’s license to travel to job sites - overnight travel may be required at times, • Ability to multi-task and meet tight deadlines This position is a combination of site visits, travel-related work, and sedentary work. An employee is regularly required to drive, stand, sit, walk, reach, type, talk, hear, balance, stoop, kneel, crouch, crawl, climb, push, pull, carry, and lift up to 20 pounds and occasionally move up to 50 pounds. An employee may also be required to traverse uneven terrain, enter structures, use ladders, climb scaffolding, walk on roofs, enter crawl spaces and other tight areas, as well as work in a variety weather conditions. Company DescriptionBenefits: -\tHealth Insurance o\tMedical insurance - company pays an industry-leading 70% of the cost for you and your dependents o\t100% company paid Vision and Dental coverage for you, your spouse and child(ren) o\t100% company paid Accident, Critical Illness (including cancer), and Hospital Insurance for you, your spouse and child(ren) o\t100% company paid Short-term and Long-term disability for employees o\t100% company paid Basic Life and Supplemental Life Insurance for you, your spouse, and child(ren) o\t$1,000 allowance for the birth of a child o\t12 weeks maternity leave and up to 4 weeks bonding leave company paid -\tTime Off (32 days total) o\t20 days PTO prorated o\t10 paid holidays o\t2 paid volunteer days -\t401K o\tEligible after 60 days of service o\tIncludes up to 4% match o\tNo vesting period -\tTenure o\t5-Year Anniversary - Additional 5 days PTO accrued per calendar year for a total of 20 days o\t10-Year Anniversary - Additional 5 days PTO accrued per calendar year for a total of 25 days, plus an additional 5 days of PTO and up to $10,000 expenses reimbursed towards a one-time sabbatical o\tMentor program o\tContinuing education -\tCompensation o\tAnnual bonus pro-rated based on start date o\tStudent debt assistance up to $300 per month for 5 years for job-related degrees o\tStraight time available to be paid for eligible salaried and exempt positions (non directors/managers) working more than 43 hours per week o\tWellness reimbursement of $75 per month o\tNight out reimbursement of $75 per month o\tCell phone reimbursement of $15 per month o\t$5,000 referral bonus (for a successfully hired colleague) o\tTSA Pre-Check Reimbursement o\tCLEAR reimbursementBenefits:\r\n•\tHealth Insurance\r\no\tMedical insurance - company pays an industry-leading 70% of the cost for you and your dependents\r\no\t100% company paid Vision and Dental coverage for you, your spouse and child(ren)\r\no\t100% company paid Accident, Critical Illness (including cancer), and Hospital Insurance for you, your spouse and child(ren)\r\no\t100% company paid Short-term and Long-term disability for employees\r\no\t100% company paid Basic Life and Supplemental Life Insurance for you, your spouse, and child(ren) \r\no\t$1,000 allowance for the birth of a child\r\no\t12 weeks maternity leave and up to 4 weeks bonding leave company paid\r\n\r\n•\tTime Off (32 days total)\r\no\t20 days PTO prorated\r\no\t10 paid holidays\r\no\t2 paid volunteer days\r\n\r\n•\t401K\r\no\tEligible after 60 days of service\r\no\tIncludes up to 4% match\r\no\tNo vesting period\r\n\r\n•\tTenure\r\no\t5-Year Anniversary - Additional 5 days PTO accrued per calendar year for a total of 20 days\r\no\t10-Year Anniversary - Additional 5 days PTO accrued per calendar year for a total of 25 days, plus an additional 5 days of PTO and up to $10,000 expenses reimbursed towards a one-time sabbatical\r\no\tMentor program\r\no\tContinuing education\r\n\r\n•\tCompensation\r\no\tAnnual bonus pro-rated based on start date\r\no\tStudent debt assistance up to $300 per month for 5 years for job-related degrees\r\no\tStraight time available to be paid for eligible salaried and exempt positions (non directors/managers) working more than 43 hours per week\r\no\tWellness reimbursement of $75 per month\r\no\tNight out reimbursement of $75 per month\r\no\tCell phone reimbursement of $15 per month\r\no\t$5,000 referral bonus (for a successfully hired colleague)\r\no\tTSA Pre-Check Reimbursement\r\no\tCLEAR reimbursement

Job Description Interested in getting in at the ground floor of a new, disruptive company attacking an important multi-billion-dollar problem? Accelsius is developing revolutionary direct-to-chip cooling technology applicable in the data center, in 5G edge deployments, and in embedded applications such as electric vehicles. Accelsius is looking for a seasoned and experienced Production Test Engineer to help drive the design and implementation of manufacturing test processes specifically associated with product control systems and final manufacturing system test in advance of rapid product and company growth. This position reports directly to the Vice President Mfg Operations and the right candidate will provide strong strategic and tactical thought leadership backed with a proven track record of successful execution and subject expertise to drive operational excellence and growth of manufacturing operations. Role Responsibilities: • Establish and oversee the manufacturing system test development and execution including product test procedures, test scripts, etc., • Establish and oversee PCBA manufacturing test development, design, and test fixture build execution including related test procedures, test scripts, etc., • Fully support failure analysis efforts to address specific and systematic failures associated with product design, process design, manufacturing, or assembly., • Work with product development engineering teams to ensure requirements for production testing components, systems, and products are enabled and scaled for volume ramp., • Provide technical expertise and support to manufacturing including hands-on debug of testing systems or components., • Liaise with component suppliers or contract manufacturers to implement product testing criteria, fixtures, and specifications., • Establish effective performance management system to ensure timely delivery of products, • Collaborate with Manufacturing, Quality, Product Engineering, and other Operations teams to ensure smooth delivery of products and mitigation of any potential risks or disruptions to supply, • Bachelor of Science degree in engineering or a relevant technical field, • 8+ years relevant experience with previous roles showing progressively increasing responsibility over systems, methods, and scope of projects, • Ability to design, automate, and maintain test equipment used for Engineering Design Test Verification, Qualification Validation, and Manufacturing Product Validation, • Ability to develop requirements, specifications, plans, procedures, and reports for test system development and product qualification, verification, and validation, • Ability to design test fixtures as needed. Experience with AutoCAD, SolidWorks or similar drawing/design software skills a plus, • Ability to carry out detailed Test Systems design work including 3D modeling, simulation and design verification testing, as required, • Exceptional communication and interpersonal skills with the ability to effectively collaborate with stakeholders at all levels of the organization, • Experience designing, building and operating testing fixtures for controls systems, • Experience with PCB design and assembly for test fixtures, • Experience designing, building and operating testing scripts, • Experience in developing tests for automatic execution, • Experience with LabView, • Experience in establishing facilities, mechanical manufacturing, and test processes, • Previous experience in metal machining equipment, mechanical processing, metal cleans/degreasing, and mechanical/electrical assembly operations., • Previous experience with Facilities and utility-based systems including, HVAC, chilled water, electrical distribution, CDA, environmental safety, and fire systems., • Strong background in lean manufacturing principles, process optimization and continuous improvement methodologies, • Excellent leadership and team interface skills with the ability to motivate and inspire others, • Knowledge of industry regulations and standards related to manufacturing operations The position is based in Austin, Texas. Accelsius does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, veteran status, marital status, or based on an individual's status in any group or class protected by applicable federal, state or local law. Accelsius encourages applications from minorities, women, the disabled, protected veterans and all other qualified applicants.

Job Description Schedule Requirements: Monday through Friday 7:30AM to 3:30PM Location: Austin Cultivation & Production Facility Everyone is welcome here. Each of us is unique, and that's what makes us amazing. We believe in inclusiveness and celebrating each person's individuality, because there's power in bringing people with different points of view and life experiences together. That's why we provide equal employment opportunities (EEO). All applicants are considered regardless of race, color, religion, national origin, age, sex, marital status, ancestry, physical or mental disability, veteran status, or sexual orientation. So, bring yourself and your best ideas; when we feel safe and comfortable being ourselves, there's no limit to what we can achieve.IN A NUTSHELL… As a Production Technician II, you will play a critical role in the processing and production of high-quality cannabis products. This position involves working in all aspects of the production process, including extraction, packaging, testing, and ensuring product quality. You will work closely with the Laboratory Manager and team to maintain an efficient and productive work environment. The cannabis industry is continuously evolving, and you must be able and willing to learn and implement new technologies and methods to enhance efficiency and effectiveness. Parallel is one of the largest multi-state cannabis companies in the world, owning and operating in three markets; Florida (Surterra Wellness), Massachusetts (NETA) and Texas (Goodblend). If you enjoy companies that are growing, moving fast, and constantly challenging themselves to achieve more, then Parallel is for you. We work hard, lean on each other, and are passionate about a pretty ambitious vision … pioneering a new paradigm of what well-being can be for all people, everywhere. For more information, visit . WHAT YOU WILL BE DOING Extraction: Support extraction processes, including biomass preparation, operating extraction equipment, and ensuring the safe and efficient production of cannabis extracts. Lab Work: Assist with lab-related tasks, including the preparation and testing of samples, maintaining lab equipment, and ensuring compliance with safety and quality standards. Packaging: Assist with the packaging of cannabis products, including labeling, weighing, and sealing products for distribution. Quality Control: Conduct quality control checks throughout the production process to ensure products meet company standards and regulatory requirements. Sanitation: Maintain a clean and organized work environment, including the cleaning and sanitization of equipment and work areas to prevent contamination. Compliance: Adhere to all state and local regulations, as well as company policies and procedures, to ensure legal and operational standards are met. Inventory Management: Assist with inventory management, including tracking and recording product quantities, and reporting discrepancies. Adaptability and Learning: Stay updated on industry trends and new technologies. Be open to learning and implementing new methods to improve production efficiency and effectiveness. Team Collaboration: Work collaboratively with other team members to ensure the smooth and efficient operation of the production department. Other Duties: Perform other duties assigned by the Production Manager to support the overall success of the production operation. EXPERIENCE AND SKILLS YOU'LL BRING Required • Age 21 or over, • Valid Government-Issued Photo ID, • Bachelor's degree in Biology, Chemistry, Microbiology or a related field from an accredited university/college preferred, • Previous experience working in a cannabis production facility, lab, or a related manufacturing environment., • Familiarity with quality control, policy, procedure, and documentation, • Experience with cannabis extraction processes, lab procedures, knowledge of production techniques, and proficiency in using production-related software and tools., • Ability to learn new technologies, • Ability to multitask and be aware of multiple active processesPHYSICAL REQUIREMENTS, • Ability to consistently lift up to 50 pounds, • Ability to be able to be in constant standing/moving position, • Ability to perform various physical activities, including lifting, standing, and squatting, • YOU WILL BE SUCCESSFUL IF YOU…, • Are self-motivated; micro-managing isn't fun for anyone, • Roll your sleeves up and do the work; strategy is important, but so is getting stuff done, • Willingness to flex between department to s, • Can work fast and be flexible; our industry is always changing, • Play nice with others; we collaborate with each other a lot, • Think creatively; sometimes, the "traditional" solution isn't the best oneWHAT YOU GET, • Employee discount, • Consistent, reliable benefits; Full medical/vision/dental, 401k with possibility of a company match, access to company-sponsored well-being programs, • Balance and flexibility; paid time off, paid parental leave, flexible work arrangements, • Tuition Reimbursement Programs, • Pet Insurance, • Chance to make a difference; Employee Relief Fund, community volunteerism through our Parallel Cares program PARALLEL IS UNITED BY OUR VISION, Mission, & Values Our Vision – why we exist – is to pioneer well-being and improve the quality of life for humanity through the benefits of cannabinoids. Our Mission – how we will do this – is to build a leading, global well-being company through the best talent, our values, trusted and recognized brands, science and technology-based innovation, and a relentless focus on execution and continuous improvement. Our Values – Integrity | Collaboration | Alignment | Intentionality | Accountability | Agility We are an Equal Opportunity Employer. We embrace and encourage our employees' differences in age, color, disability, ethnicity, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socioeconomic status, veteran status, and other characteristics that make our employees unique. Disclaimer Parallel reserves the right to change or assign other duties to this job description. Your employment with Parallel is a voluntary one and is subject to termination by you or Parallel at will, with or without cause, and with or without notice, at any time. Nothing in this document shall be interpreted to be in conflict with or to eliminate or modify in any way the employment-at-will status of Parallel associates.

Job Description Building Automation Programmer - Tridium & Distech Location: Austin, TX (Field & Remote Work) We're seeking an experienced BAS Programmer with deep expertise in Tridium Niagara and Distech Controls. In this role, you'll focus on programming, commissioning, and optimizing BAS devices, both onsite and remotely. You'll bring control sequences to life, integrate systems for peak efficiency, and ensure building environments operate exactly as designed. You'll be hands-on in the field for startups, troubleshooting, and commissioning, as well as working from a remote setup to fine-tune logic, graphics, and system performance. This role combines technical problem-solving, precise programming, and collaborative work with project teams and clients. Key Responsibilities * Program, configure, and commission Tridium Niagara and Distech BAS controllers and front-end software. * Create and optimize graphics, dashboards, and trends for user interfaces. * Integrate BAS with third-party systems (BACnet, Modbus, etc.). * Troubleshoot programming logic, device communications, and network integration issues. * Perform remote diagnostics and fine-tuning to ensure system performance meets project specifications. * Conduct onsite startup, functional testing, and commissioning of HVAC and control systems. * Collaborate with engineering teams to translate sequences of operation into effective control programs. * Maintain clear project documentation, backups, and version control of programs. * Support service teams in resolving complex controls issues in the field or remotely. * Ensure all work meets industry standards, project timelines, and customer expectations. Requirements * Proven experience programming BAS systems with Tridium Niagara and Distech Controls. * Strong understanding of HVAC sequences, control theory, and system integration protocols (BACnet/IP, MSTP, Modbus). * Ability to read and interpret control drawings, wiring diagrams, and sequences of operation. * Proficient in remote access and troubleshooting tools. * Field commissioning experience for new construction or retrofit projects. * Excellent problem-solving and communication skills. * Capable of independent work and time management in both field and remote environments. * Familiarity with other BAS platforms (Alerton, Siemens, JCI, Automated Logic, etc.) is a plus. Compensation & Benefits • Salary: $90,000 to $120,000 per year, depending on experience, certifications, and a successful interview Medical, Dental, and Vision insurance * 401(k) with company match * Paid Vacation, Sick Time, and Holidays Why Join Us? Joining our team means working with cutting-edge BAS technologies on high-profile projects while enjoying the flexibility of both field and remote programming work. You'll be part of a collaborative and highly skilled group that values innovation, technical excellence, and problem-solving. We offer competitive pay, comprehensive benefits, and ongoing opportunities for professional growth, including advanced training in Tridium Niagara and Distech systems. If you're looking to take your BAS programming expertise to the next level in an environment that supports your success, we'd love to have you on board.

Job Description *Please note that this position is for an upcoming position. We are, however, accepting applications for this anticipated need. If you are interested in joining The Building People, we encourage you to APPLY TODAY! The Building People, LLC, has a position open for a full-time Building Controls Technician who will provide services related to the expansion, upgrade or replacement of building automation hardware and software for smart building infrastructure. The position will work independently to meet project requirements with limited supervision. The programmer will be responsible for programming, configuring, and testing of Direct Digital Control (DDC) building automation and control systems. The control technician will be assigned to buildings in Austin, TX and its neighboring suburbs. Responsibilities/Duties: * Design and engineer control system hardware and software programming based on project plans, specifications, and other contract documents * Ability to program projects with various levels of complexity * Capable of performing network troubleshooting, database troubleshooting and repair programming * Collaborates with the engineering team on the system configuration, network and software requirements, graphics, programming, and sequences of operations * Develop and configure the sequence of operations, programming, graphics, database, network, and integrations into third party systems * Maintains accurate and thorough project documentation and redlines * Provides owner training as required by the project * Executes system commissioning and functional testing * Assist in installation of control hardware * Startup and commission new hardware installations * Provide project management assistance on projects as required, interfacing directly to customers * Supervise sub-contractors and suppliers as needed * Help educate lower-level technicians through on the job training as needed *This position will require a minimum of 25% travel Required Skills * Excellent verbal and written communication skills * Proficient in Microsoft Office Suite or related software * Programming skills * Strong analytical skills * Strong interactive and communication skills * Strong troubleshooting skills * Experience with electronics and basic electrical circuits * Thorough understanding of and ability to use appropriate tools * Excellent customer service and ability to work well with others * Knowledge of DDC Control Theory and Applications as related to HVAC equipment * Strong knowledge of common DDC communications protocols such as but not limited to BACnet, LON, Modbus, etc. Required Experience/Education * At least 3 years of experience with programming, startup and commissioning of control systems • Niagara Ax or N4 certification a plus but not required Experience with multiple manufacturers of controls a plus * Technical knowledge with installation of controls equipment and ancillary devices Physical Requirements * Physically able to climb overhead or crawl under spaces to complete jobs. * Must be willing to work at heights. * Must be able to lift up to 35 pounds at times.

Job DescriptionSalary: $21-$23/hr DOE Mission/ Position Description Summary: The duties described below for a Laboratory Technician serves as guidance. Personnel should become proficient in the test procedures that HVJ performs as part of quality assurance and quality control for construction materials. Detailed procedures and training will be provided by the Lab Manager. Assist with performing laboratory testing Document work performed by number of tests or time spent, as appropriate Communicate test results to client when required Provide support on engineering projects as directed Assist other personnel at the direction of lab manager Perform duties in a safe, cheerful, efficient, and workmanlike manner Maintain assigned equipment Be responsible for maintaining quality standards on all projects Additional Key Expectations: Responsible for making sure that all laboratory work performed meets or exceeds the minimum requirements set forth in the quality manual and the test procedure. Responsible for making sure that laboratory has the appropriate resources in place to execute testing per applicable standards. This includes but is not limited to acquiring and maintaining equipment, cross training, preparing and reviewing lab reports, client coordination, resolving conflicts, coordination with other departments and administrative requirements. Preferred Key Criteria/Requirements: 1-3 years of experience working in Civil Engineering/Geotechnical/Construction Materials Testing Lab preferred Graduation from High School or equivalent. Good skills in math and communications. Ability to lift concrete, soil, or asphalt samples up to 50lbs as a routine part of the job. Valid Texas Drivers License Revisions: The responsibilities of this position may evolve with time. Revisions to the Job Description and Scorecard will be made as needed, and the adopted version with the most recent date will apply. HVJ SCTx is an equal opportunity employer.

Job Description We’re making the world a more walkable place. Through intuitive personal mobility, we make walking faster, more efficient, and more accessible to empower people to choose walking over sitting in traffic. By giving people the ability to Moonwalk, we believe the path forward to a better future is easily reached on your own two feet. Help us advance the world’s fastest shoes by designing, prototyping, and testing reliable and innovative hardware. If you are looking for a job where MS Excel is a skill set, this is not the one. We want an engineer ready to push the boundaries and one who makes the impossible a reality. We are looking for a work ethic similar to an engineer in Formula One. You must deliver and iterate quickly. We are not here for mediocrity, we are here to create elegant engineering designs. Is it demanding? Sure, but it is also rewarding and fun. We are covered in Wired, CNET, Gizomodo, PCMag and many other tech presses. Responsibilities: • You will be responsible for the electrical design from end-to-end for the innovative robotic shoes: from concept through architecture and design, simulation and analysis, R&D, test and manufacture to production., • You will work with the firmware team to participate in architecture and code review., • You will interact with a mechanical engineering team to design a tightly integrated electro-mechanical system., • You will be responsible for writing firmware scripts and example codes to validate hardware solutions., • Solid experience in PCB design and optimizing component placements and routing for motor control and minimal EMC., • Experience in three phase BLDC motor control (FOC) is preferred, • System integration experience of embedded systems with electronics, firmware, and software., • Experienced in the use of MCU and IC devices and their peripheral circuitry including signal conditioning, voltage level translators, etc., • Solid experience in board bring-ups including reworking and soldering., • Comfortable designing and testing board-level power supplies., • Familiar with analog and power circuitry, • Proficient with standard EE tools (scopes, digital analyzers etc.), • Proficient in Altium Design, • Experience in JTAG/SWO., • Basic level of low-level programming (register access and configuration) for hardware V&V, • Opportunities for participation in our Employee Options programs, • 401K retirement plan, • Excellent medical, dental, and vision insurance, • Sick and Vacation time (Flex time for salary positions), and Paid Holidays, • Massive Growth Opportunities and a long-term career, • Casual and comfortable work environment

Job Description Lab Technician Interested in getting in at the ground floor of a disruptive company tackling a multi-billion-dollar challenge? Businesses and consumers continue to demand increasing data services at an exponential rate—streaming, deep learning, analytics, IoT connectivity, and more. These applications require higher-performing CPUs, components, servers, and data centers, all generating significant heat that traditional cooling systems struggle to manage. Accelsius is developing revolutionary direct-to-chip, 2-phase cooling technologies that enable Server OEMs, Data Centers, Edge Computing Operators, and 5G deployments to achieve performance, sustainability, scale, and cost goals while serving this high-growth market for data services. Position Summary The Lab Technician will play a critical role in supporting prototype development, system builds, and experimental testing within our engineering lab. This position is highly hands-on, requiring technical curiosity, precision, and a willingness to collaborate across teams to accelerate innovation. Key Responsibilities • Assemble, configure, and maintain prototype systems and lab test setups., • Prepare and interpret specifications for fabrication, assembly, and testing., • Support engineers in conducting lab experiments, recording data, and troubleshooting test results., • Perform mechanical and electronic assembly, including handling cooling components, sensors, and instrumentation., • Maintain lab organization, safety standards, and equipment calibration., • Assist with the build and integration of rack-level systems during early deployments., • Contribute to continuous improvement initiatives for lab processes and test methodologies. Qualifications • Education/Experience:, • 2–4 years of relevant industry or lab experience (electronics, mechanical systems, or hardware prototyping)., • Associate’s or Bachelor’s degree in a technical field preferred, but not required., • Technical Skills:, • Hands-on experience with hardware assembly and testing., • Familiarity with heating/cooling systems, fluid dynamics, or electronics troubleshooting preferred., • Ability to read and follow technical drawings, wiring diagrams, and assembly instructions., • Other Requirements:, • Strong attention to detail with excellent problem-solving skills., • Positive attitude and collaborative approach in a fast-paced startup environment., • Previous startup or R&D lab experience is a plus. Accelsius offers a competitive salary with equity, a full range of benefits including medical and dental, 401K, and unlimited PTO. The position is based in Austin, Texas. Accelsius does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, veteran status, marital status, or based on an individual's status in any group or class protected by applicable federal, state or local law. Accelsius encourages applications from minorities, women, the disabled, protected veterans, and all other qualified applicants.

Job Description • Please note that this is for an upcoming position. We are, however, accepting applications for this anticipated need. If you are interested in joining The Building People, we encourage you to APPLY TODAY! The Building People, LLC, has a position open for a full-time Senior Building Controls Technician to provide services related to the expansion, upgrade or replacement of building automation hardware and software for smart building infrastructure. The position will work independently to meet project requirements with limited supervision. The programmer will be responsible for programming, configuring, and testing of Direct Digital Control (DDC) building automation and control systems. Responsibilities/Duties • Design and engineer control system hardware and software programming based on project plans, specifications, and other contract documents, • Ability to program projects with various levels of complexity, • Capable of performing network troubleshooting, database troubleshooting and repair programming, • Collaborates with the engineering team on the system configuration, network and software requirements, graphics, programming, and sequences of operations, • Develop and configure the sequence of operations, programming, graphics, database, network, and integrations into third party systems, • Maintains accurate and thorough project documentation and redlines, • Provides owner training as required by the project, • Executes system commissioning and functional testing, • Assist in installation of control hardware, • Startup and commission new hardware installations, • Provide project management assistance on projects as required, interfacing directly to customers, • Supervise sub-contractors and suppliers as needed Required Skills * Excellent verbal and written communication skills * Proficient in Microsoft Office Suite or related software * Programming skills * Strong analytical skills * Strong interactive and communication skills * Strong troubleshooting skills * Experience with electronics and basic electrical circuits * Thorough understanding of and ability to use appropriate tools * Excellent customer service and ability to work well with others * Knowledge of DDC Control Theory and Applications as related to HVAC equipment * Strong knowledge of common DDC communications protocols such as but not limited to BACnet, LON, Modbus, etc. Required Experience/Education * At least 3 years of experience with programming, startup and commissioning of control systems * Niagara N4 certification * Experience with multiple manufacturers of controls a plus * Technical knowledge with installation of controls equipment and ancillary devices Physical Requirements * Physically able to climb overhead or crawl under spaces to complete jobs. * Must be willing to work at heights. * Must be able to lift up to 35 pounds at times.

Job Description ALARM CONSTRUCTION TECHNICIAN JOB DESCRIPTION Job Responsibilities include but are not limited to: • Installation of fire alarm systems in residential, commercial, and industrial buildings, • Installation, service, and trouble-shooting of fire alarm systems along with all its related equipment, • Be a leader: oversee, direct, and delegate appropriate tasks to fulfill project completion deadlines, meet scheduling requirements, and exceed the goals established by the fire alarm manager, • Ensure project results are achieved within financial and productivity budgets, • Accurately complete, execute and process paperwork/electronic or paperless required by the office and corporate management systems, • Conduct/coordinate necessary testing of the system Ensure required certifications are complete, • Instruct and train Helpers, apprentices, or other personnel in the basic process of service, repair and/or system installation, • Coordinate the daily work schedules and direct the daily tasks/productivity of assigned employees, • Maintain inventory on vehicle, • Believe In, Live, and Support Our Mission Statement, Core Values and Business Plan Daily, • Safety First, • Ensure timely and complete submittal of JSAs, Toolbox Talks, Audit Forms, etc., • Ensure timely and accurate Incident and Accident Reporting, • Hold yourself accountable for all Safety Initiatives, • Hold yourself accountable for Safe Driving of Company Vehicles, • Ensure awareness and support of Stop Work Authority, • Complete all Training Requirements – Safety, Certifications, etc., • Submit accurate Timesheet – job numbers/names, OT and travel pay, completed on time, etc., support transition to Electronic timesheet submittal, • Ensure all required documents are complete, accurate and professional, with required signatures, • Ensure proper Inventory Management – review, update, and approve packing slips – submitted timely, proper material management, • Ensure proper Maintenance and care of equipment – trucks, lifts, tools, etc., • Keep jobsites clean and organized, • Ensure Production Efficiency – awareness of budget vs. actual labor hours and proactive communication with superintendent, • Support and Ensure Adherence to Company SOPs – Purchase Orders, Change Orders, etc., • Timeliness – at the job on time; attendance; communication with supervisor; paperwork, • Ensure Customer Satisfaction and respond to Customer Satisfaction Survey feedback improvement opportunities, • Maintain Quality Control i.e. reduce the need for return trips and warranty work, • Maintain a Professional appearance, • Communicate effectively and professionally within the department and with internal and external customers, • Teamwork – maintain positive interactions within your team, local office, etc., • Actively Participate in required team meetings, • Must have knowledge of fire alarm systems.., • Understand fire alarm installation requirements., • Ability to properly read fire alarm blueprints, submittals and operation/product manuals., • Minimum education of High School Diploma or Equivalent, • Forklift and scissor lift certification, preferred, • FAL required., • Ability to take direction from upper management, • Accurately complete and maintain all paperwork, • Maintain vehicle and tools as per company policy, • Must have valid state driver's license and good driving record, • Self-motivated, Ambitious, Interactive, Communicative, Detail-oriented, Organized, • Valid driver’s license and clean driving record, • Knowledgeable with NFPA, NEC and local applicable codes and all necessary codes, • Experience with powered hand tools, hand tools test equipment, multi-meter usage, digital analyzer and commissioning devices, • Ability to interact and communicate in a professional and positive manner with other trades, customers, project managers, county officials, general contractors, etc., • Demonstrate positive team work and ability to be a team leader and mentor, • Maintain a clean and safe work environment, • Comply with all company safety practices and the safety handbook, • Complete projects in a timely manner while providing the highest standard of quality work and customer satisfaction

Job DescriptionCareer Renew is recruiting for one of its clients a Full Stack Engineer (Oracles) - this is a fully-remote role for US-based candidates. We are the first automated, on-chain economic security system enabling crypto protocols to optimize risk management and capital efficiency while safeguarding user funds. We analyze protocol mechanics and scenario implications using world-class custom EVM simulations to provide actionable insights. Our platform is trusted by leading protocols, including Aave, GMX, dYdX, Venus, Jupiter and others, to manage and secure billions of dollars in assets. We are seeking a proactive and results-driven Senior Full Stack Engineer to join our team. Reporting directly to the Oracle Team Lead, you will play a critical role in building data-driven dashboards and tools to support risk analysis. In this role, you will collaborate closely with research and protocol teams to deliver high-quality frontend and backend components that power protocol security insights. Responsibilities * Take full ownership of projects: break down high-level goals into actionable tasks, propose technical approaches, and drive execution end-to-end. * Build and maintain oracle infrastructure that support the various data feeds we deploy across many blockchains * Partner with research and protocol teams to deeply understand DeFi protocols and present insights via intuitive, data-rich interfaces. * Ensure code quality and maintainability through testing, documentation, and code reviews. * Take initiative in identifying product opportunities and technical improvements across the platform. * Collaborate with cross-functional teams to ensure high-quality outputs. * Contribute to the continuous improvement and innovation of our platform. Requirements * 5+ years of professional experience in full-stack development with modern technologies (Node.js, Python, React etc.). * Proven ability to independently manage projects and deliver production-grade features with minimal supervision. * Experience with Python, Go, Solidity and Rust * Comfortable working in dynamic, high-ownership environments with shifting priorities. * Passion for high-quality engineering and building tools that solve real user problems. * Strong problem-solving abilities and a passion for DeFi and blockchain technology. Preferred Qualifications * Experience designing, developing, and operating cloud-native services (AWS/GCP). * Strong foundation in frontend engineering best practices including accessibility, performance, and testing. * Familiarity with CI/CD pipelines and modern DevOps workflows. * Interest in or curiosity about DeFi and blockchain technologies. * Excellent communication skills and the ability to work cross-functionally in a fast-paced environment. * Based in United States with the ability to work remotely or from our Brooklyn office in NYC. Compensation & Package Our Perks * Competitive PTO (21 days) + sick days (7) + 8 observed US-company holidays * 100% employer-paid health benefit options (Medical, dental & vision insurance) for you and your dependents * FSA or HSA (depending on selected health insurance) * Thoughtful Parental Leave Policy * Corporate wellness programs (OneMedical, Teladoc, Talkspace, EAP) * Career growth opportunities at a rapidly expanding, global technology company * Pre-tax Commuter Benefits

Job Description Firetrol Protection Systems is a reputable company specializing in fire protection and life safety services. We are currently looking for a skilled Fire Alarm Service Technician to join our team. As a Fire Alarm Service Technician, you will be responsible for installing, testing, and servicing fire alarm systems to ensure they meet all safety standards and regulations. Responsibilities: • Perform installation, maintenance, troubleshooting, and repair of fire alarm systems, • Conduct inspections and testing of fire alarm systems, • Provide excellent customer service and address client concerns, • Minimum of 2 years of experience as a Fire Alarm Service Technician, • Valid state-issued fire alarm technician license or certification, • Strong knowledge of fire alarm systems and their components, • Experience with installation, troubleshooting, and repair of fire alarm systems, • Excellent communication and problem-solving skills, • Ability to work independently and as part of a team Firetrol offers competitive wages and top-of-the-line benefits that include health, dental vision, life insurance, short and long term disability, generous paid time off practice and a 401(k) plan with a generous company match and immediate vesting. Additionally, sponsors training and education opportunities. Finally, Firetrol offers career growth opportunities, not just a job.

Job Description: KTA-Tator, Inc. (KTA) is a 100% employee-owned consulting engineering, testing, and inspection firm internationally recognized as a leading expert in asset protection, specializing in materials engineering, protective coatings, and concrete/steel fabrication inspection. KTA’s Commercial Services Group provides building systems consulting services through a variety of offerings, including building envelope diagnostics with an emphasis on moisture intrusion, masonry, and paint problems, specifying repairs, and providing quality assurance services during remodel projects. KTA is seeking a full-time Commercial Building Inspector/Project Manager to travel throughout portions of the United States. This position is a combination of field inspection and project execution. This is a blend of travel and home office work depending on location. Work that will be performed consists of conducting comprehensive building condition assessments and inspections for commercial properties and architectural sites. The assessment and inspection of conditions include: • Identifying exterior and interior coating problems;, • Conduct and record results of various types of building diagnostic tests on floors and interior and exterior walls and roofs;, • Gather building condition data and obtain measurements of building components and defects;, • Take field notes and summarize the results electronically;, • Interfacing with onsite building owners, restoration contractors and comping quality assurance reports; and, • Examining the building envelope for design or construction deficiencies;, • Managing projects through the initial assessment and subsequent in-process inspections and final document closeouts.This position is open to all candidates with the following qualifications:, • Associate’s or Bachelor’s degree in Building Construction or related field – preferred, • Ability to travel extensively ~70% of the time, • Experience with reading, interpreting, and editing/revising blueprints or as-built drawings (utilizing construction software such as Bluebeam, AutoCAD, Autodesk) is desired, • Experience with construction, repair, painting and/or renovation of retail buildings, • Experience with concrete slabs, masonry construction, and/or roofing – preferred, • Experience using a laptop and iPad, • Proficiency with Word and Excel, • Strong written and oral communication skills, • Ability to perform a significant amount of walking around project sites, • Ability to sit/drive for periods of time, • Ability to climb ladders (must be comfortable taking readings and working while on a ladder), • Manual dexterity (to handle small objects, instruments, or gages), • Ability to safely lift 40 pounds Links: Know Your Rights: Workplace Discrimination is Illegal The Family and Medical Leave Act Pay Transparency Nondiscrimination Provision Notice of E-Verify Participation E-Verify Right to Work We strive to make this site accessible to any and all users. If you are a qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access our career center and application process as a result of your disability or if you have Equal Employment Opportunity questions. To request an accommodation, please contact us at info@kta. Powered by JazzHR ZeRqs5RVtV

Job Description Job Title: ABD & OBGYN SONOGRAPHY INSTRUCTOR Summary: An instructor facilitates meaningful learning of the course competencies in the curriculum and proactively supports all facets of the learning environment. S/He provides education through excellence in learning-centered instruction that will enable graduates to fulfill the evolving needs of the marketplace. S/He encourages a culture of learning that values mutual responsibility and respect, life-long learning and ethics as well as personal and professional development. Incumbent must assure that the College of Health Care Professions (CHCP) philosophy: quality services to clients; development, growth, involvement, and recognition of employees; sound economic principles; and environment which is conducive to innovation, positive thinking and expansion - is considered in carrying out the duties and responsibilities of this position. Key Job Elements: Instructor • Provides competency-based education which aligns with the CHCP model of curricula as well as supports the CHCP style of system delivery., • Designs and delivers excellence of class instruction through the development of instructional plans to meet course competencies, the development of activities which support lesson objectives, and delivers the instruction as approved., • Enables the achievement of pre-described exit competencies for student achievement and evaluation of learning by providing instruction which fosters competencies and establishes student performance criteria and evaluation., • Delivers excellence in learning-centered instruction by establishing a classroom environment conducive to learning and student involvement as well as effectively planning and preparing for classes and student success., • Provides weekly feedback to students, taking special care to provide comprehensive feedback at the conclusion of the mid-term mark, providing struggling students with opportunities to improve., • Promotes student success by showing flexibility in style and work schedule as well as exhibiting a passion for teaching and students and engaging students in the learning process., • Manages the learning environment through keeping accurate records, taking attendance, submitting grades and other reports on time, and enforcing school/campus academic and attendance policies., • Attends a majority of general faculty, departmental, and school-wide meetings., • Contributes service to the campus by actively participating on at least one special project committee each year., • Relates professional/life/industry experience to learning by the continuation of professional/technical skills development, the introduction of industry perspective into courses, and the active awareness of professional/industry trends and opportunities., • nswers questions related to program content that may impact curriculum and delivery of objectives for courses. Also attends Program Advisory Committee meetings one a year to the program for which the expertise is appropriate., • Ability to communicate abstract and concrete concepts to individuals in both written and oral form., • Ability to quickly establish rapport with students and to maintain positive relationships with students, continuing seeking to promote and provide opportunities for student success., • Ability to adapt classroom management style and communication style to engage various personalities inside and outside the classroom environment., • Able to prepare lesson plans, syllabi, tests, worksheets and other teaching materials with minimal supervision, seeking to provide multiple opportunities for student engagement and success., • Must be willing to work long hours, including morning, evening, and afternoon course shifts when applicable providing specialty program tutoring and review for testing/certification (e.g. DMS)., • Must be comfortable with various computer software programs, including presentation and word processing software and email., • Must be comfortable utilizing technology in the classroom, including computers, and projectors, always seeking to use technology to enhance the student experience in the classroom., • Must be able to familiarize self with new technology and approaches as opportunities present themselves. Education/Experience: • At a minimum an Associate’s Degree, • RDMS, ABD, OB/GYN - Required, • Appropriate credential(s) specific to the concentrations offered, • Proficiency in teaching methodology, supervision, instruction, evaluation, and guidance, • The equivalent of three years full-time professional experience as a general Sonographer, cardiac Sonographer, pediatric cardiac Sonographer and /or vascular technologist. Full-time is defined as 35 hours per week Powered by JazzHR vVgDwacN4q

Job Description Why Join Our Team? Joining Rinker means becoming a part of a team that's committed to making a positive impact. When you work with us, you're not just building structures; you're contributing to the growth and development of communities. As a Quality Control Technician, you will be responsible for quality control in all phases of production utilizing established procedures, quality control manuals, and equipment. Join our team and enjoy a comprehensive benefits package that includes competitive pay, a 401k match, paid vacation, holidays, employee discounts, and more. Why Choose a Career with Us? • Growth and Learning: We provide an environment that encourages personal and professional growth, helping you build a long-lasting, successful career., • Innovation: Be a part of a team that's shaping the future of construction and infrastructure., • Impact: What we build today will shape the world for generations to come. Your work here will be your legacy, impacting communities and leaving a lasting mark on the world., • Responsible for quality control in all phases of production utilizing established procedures, quality control manuals, and equipment, • Read and understand shop fabrication drawings and specs and verify dimensions of product or material, • Perform internal audits and maintain quality control inspection records, • Act as liaison to outside inspectors, • Resolve quality issues due to production and fabrication errors, • Inspect finished good loads prior to plant departure, • High School Diploma or GED., • 2 years manufacturing experience. Prior QC experience preferred., • Ability to read and interpret shop drawings and American Society for Testing and Materials (ASTM) specifications., • Ability to interpret readings from Micrometers, Calipers, and other QC tools. Ready to Apply? • The process is simple. Click on the “apply” button to get started.

Job Description Hardware Reliability Engineer Interested in getting in at the ground floor of a new, disruptive company attacking an important multi-billion-dollar problem? Businesses and consumers continue to demand increasing data services at an exponential rate -- streaming, deep learning, analytics, loT connectivity, and more. What this means is higher performing CPUs, components, servers, and ultimately Data and Edge computing centers, all generating excessive heat that is increasingly difficult to manage with traditional cooling systems. Accelsius is developing revolutionary direct-to-chip, 2-Phase cooling technologies that empower and enable Server OEMs, Data Centers, Edge Computing Operators, and 5G Edge deployments to meet performance, sustainability, scale, and cost goals while serving this high-growth market for data services. We are seeking a Hardware Reliability Engineer to lead the definition and execution of mechanical validation strategies for our advanced datacenter products. In this role, you will be responsible for specifying and coordinating key mechanical and environmental tests—such as shock, vibration, thermal cycling, and HALT—to ensure our systems meet demanding real-world reliability standards. You’ll work cross-functionally with hardware design, thermal engineering, manufacturing, and system integration teams to evaluate risks and drive robust design improvements. This is a critical, hands-on engineering role requiring both technical depth and broad system-level awareness. The ideal candidate combines deep expertise in physical/mechanical testing with a solid understanding of how datacenter hardware functions as a complete thermal-electromechanical system. Key Responsibilities • Define reliability and validation test plans for new hardware products, with a focus on mechanical and thermal stress conditions., • Lead and/or support shock & vibration, thermal cycling, HALT, HASS, and temperature/humidity testing activities., • Establish mechanical, thermal, and environmental test specifications aligned with product use cases and reliability goals., • Partner with hardware, mechanical, process, and system engineers to analyze test results, identify failure modes, and propose corrective actions., • Develop custom test setups, fixtures, and protocols as needed., • Drive root cause analysis (RCA) and provide feedback on design improvements., • Maintain test documentation, reliability dashboards, and reports for internal and customer-facing deliverables., • Bachelor’s degree in Mechanical Engineering, Materials Science, or related field (Master’s preferred)., • 5+ years of experience in hardware reliability, mechanical validation, or test engineering for electronics or datacenter hardware., • Strong knowledge of environmental testing standards (e.g., ISTA, MIL-STD-810, or similar)., • Experience with HALT/HASS, thermal cycling, and vibration testing techniques., • Familiarity with thermal design, heat sinks, and system-level thermal behavior., • Proven ability to work cross-functionally and influence design decisions., • Experience in datacenter hardware, server systems, or high-density electronics., • Familiarity with refrigerant-based cooling systems, vapor chambers, or cold plate designs., • Knowledge of reliability modeling and prediction tools (e.g., Weibull analysis, FMEA)., • Help shape the next generation of sustainable cooling and reliability solutions for datacenter infrastructure., • Work at the intersection of mechanical innovation, thermal systems, and high-performance computing. Accelsius does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, veteran status, marital status, or based on an individual's status in any group or class protected by applicable federal, state or local law. Accelsius encourages applications from minorities, women, the disabled, protected veterans, and all other qualified applicants. #LI-JO1

Job Description SafeLease is an insurance technology company that specializes in commercial real estate. We focus on insurance products for the self-storage industry but are rapidly expanding our suite of services. We believe traditional commercial insurance can be distributed faster and cheaper. To do that, we’ve brought the entire insurance value chain—distribution, underwriting, and reinsurance—under one roof to drive innovation in an industry that’s ripe for change. Our technical team is growing! As we expand, we’re looking for a Product Owner to ensure our critical product lines are running effectively and elegantly. About The Role To drive our mission forward, this role will: * Make sense of signals. Translate data, research, and feedback into clear user stories, prioritized backlog items, and actionable product requirements. * Drive clarity and focus. Collaborate cross-functionally to refine acceptance criteria, align sprint priorities, and ensure the team delivers against business goals. * Roll up your sleeves. Whether it’s grooming the backlog, shaping an MVP, or testing a release, you’ll be hands-on from idea through delivery. * Represent the product. Be the go-to voice for what’s in scope, why it matters, and how it connects to the customer and company vision. About You * 3+ years in Product Ownership, ideally in a fast-moving, startup or growth-stage environment. * You thrive on solving real problems for real people—and translate insights into user stories, priorities, and tangible product outcomes. * You know how to build from zero-to-one and scale existing products. * You’re confident navigating ambiguity and turning it into action. * You understand what makes a great user experience, and can balance technical tradeoffs with delivering simple, intuitive solutions. * You bring strong communication and collaboration skills, especially with engineering, design, and go-to-market teams. * You take ownership of the backlog, move with urgency, and maintain a bias toward delivering results. Why SafeLease? The tech: Our prospects convert fast because we’re solving real problems and delivering serious value to commercial real estate owners. The team: We’re a team of seasoned pros and sharp operators who know how to move fast and build smart. High standards, low ego. The stability: We’re well-funded, growing fast, and we make sure our team shares in that success with competitive pay and equity. The employee experience: We also offer unlimited PTO, full health benefits, flexible work setups, and the kind of culture where people want to show up to do their best work. If you don't have all the qualifications listed, don't worry! We understand everyone's career path is unique and still encourage you to apply if you feel this role is aligned with your career trajectory. Employment at SafeLease is contingent upon a satisfactory verification of a general and criminal background check.