Testing jobs in Tucson, ArizonaCreate job alerts

Primary City/State: Tucson, Arizona Department Name: Tucson Cytology-Ref Lab Work Shift: Day Job Category: Lab $10k SIGN ON BONUS OFFERED!! This position is primarily located at our teaching hospital, Banner University Medical Center Tucson hospital. The cytology leadership role provides Rapid On-Site Evaluation (ROSE)/Adequacy assessment for fine needle aspiration procedures covering several busy hospital departments, in rotation with other cytologists (e.g., EBUS, ENB, Robot) while screening NGYN and FNA and will also perform digital cytology using the newly approved Hologic technology to streamline the review of GYN samples. In addition to this cutting-edge work, our cytologists have the opportunity to teach pathology to residents rotating through the department! This is a wholly engaging and rewarding opportunity. • ThinPrep Certification preferred*** Come make a direct impact on patient diagnostic care in our new, state of the art hospital laboratory. Tucson is regarded for its stargazing, local hiking, birding, old west film studios, Mexican cuisine (birthplace of the Chimichanga!) proximity to Saguaro National Park, and of course, the University of Arizona and all the cultural and sporting enjoyment a large University provides! POSITION SUMMARY Assists in assuring that all technical work within Cytology is performed at an acceptable level of competency and efficiency. Solves problems arising in Cytology testing procedures as well as more sophisticated or unusual tests. Is involved with continuous quality improvement, research and development and ensuring regulatory and accreditation compliance. Provides technical and procedural shift supervision (determine schedules, manage day to day work flow and give input into an assessment or disciplinary action) in the absence of a Cytology Technical Supervisor. All employees are responsible for (1) supporting the Company's goals and mission, (2) for following all Company policies and procedures, (3) for providing quality customer service, and (4) for following safety standards in performing all aspects of the functions below, reporting/removing unsafe equipment and attending safety education sessions. CORE FUNCTIONS 1. Performs all duties of a Cytotechnologist utilizing the knowledge and skills necessary to effectively meet the needs of all patients and clients by providing quality cytologic results in a timely manner. Provides daily operational oversight (determine schedules, manage day to day work flow and give input into an assessment or disciplinary action). Provides technical support to all bench level positions within Cytology. May be responsible for one or more technical areas of focus, to include training, quality and technical support., 2. Focuses on quality by reviewing data and assuring performance of all quality control procedures. Ensures that quality control and instrumentation maintenance records meet standards of accrediting and licensing agencies. Assists the Cytology Technical Director, Cytology Technical Supervisors and Cytology Specimen Control Supervisor, as appropriate, in the implementation of new QC/QA policies and continuous quality improvement programs in accordance with the Quality System. Provides support to the Cytology Technical Director and Cytology Supervisors during inspections., 3. Participates in Cytology financial monitoring, controlling and improvement. Tracks supply usage and orders as needed. Identifies and supports waste reduction and expense reduction programs., 4. Assists with basic personnel oversight including participation in training, developing, and coaching under the direction of the Cytology Supervisors or Technical Director. Assists in new employee orientation, training and competency validation. Provides input for competency and annual assessments for employees in appropriate time frames. Assists in implementation and updating of policies and procedures for all Cytology staff. Ensures that all Cytology staff has been trained in all company required programs, i.e. Safety and Compliance., 5. Serves as a ressource communication liaison. Interacts with Cytology staff at all bench positions, and informs Cytology Supervisors and Cytology Technical Director of issues impacting on quality and productivity. Demonstrates appropriate verbal and written skills., 6. Promotes supports and exhibits behavior consistent with the Mission, Vision, and Values of Laboratory Sciences of Arizona and customer-focused care. Ensures all company policies and procedures are followed. SUPERVISORY RESPONSIBILITIES None DIRECTLY REPORTING None MATRIX OR INDIRECT REPORTING None TYPE OF SUPERVISORY RESPONSIBILITIES None SCOPE AND COMPLEXITY On site responsibility includes involvement in intra-departmental and interdepartmental communications and activities. Internal customer-all employees within Laboratory Sciences of Arizona. External customers - nurses, clinicians, office personnel, and vendors. PHYSICAL DEMANDS/ENVIRONMENT FACTORS Reasoning, thinking, financial skills, judgement, writing, reading, problem solving, detail work, multiple concurrent tasks, frequent interruptions, math, verbal communication skills. KNOWLEDGE, SKILLS AND ABILITIES MINIMUM QUALIFICATIONS • Must be ASCP certified as a cytotechnologist., • Must qualify as a Laboratory Technologist as defined under CLIA '88., • Must have at least three years of experience in Cytology., • Must be able to recognize problems, identify the cause and determine solutions., • Must have a thorough knowledge of instrumentation and procedures utilized in the section., • Must have a working knowledge of regulatory and accreditation requirements., • Good leadership, human relations and communication skills are required., • Additional related education and/or experience preferred. EEO Statement: EEO/Disabled/Veterans Our organization supports a drug-free work environment. Privacy Policy: Privacy Policy

Primary City/State: Tucson, Arizona Department Name: Tucson Cytology-Ref Lab Work Shift: Day Job Category: Lab $10k SIGN ON BONUS OFFERED!! This position is primarily located at our teaching hospital, Banner University Medical Center Tucson hospital. The cytologist provides Rapid On-Site Evaluation (ROSE)/Adequacy assessment for fine needle aspiration procedures covering several busy hospital departments, in rotation with other cytologists (e.g., EBUS, ENB, Robot) while screening NGYN and FNA and will also perform digital cytology using the newly approved Hologic technology to streamline the review of GYN samples. In addition to this cutting edge work, our cytologists have the opportunity to teach pathology to residents rotating through the department! This is a wholly engaging and rewarding opportunity. • ThinPrep Certification preferred*** Come make a direct impact on patient diagnostic care in our new, state of the art hospital laboratory. Tucson is regarded for its stargazing, local hiking, birding, old west film studios, Mexican cuisine (birthplace of the Chimichanga!) proximity to Saguaro National Park, and of course, the University of Arizona and all the cultural and sporting enjoyment a large University provides! Find out why Tucson was named the #1 City for Cytotechnologists in 2025: 10 Best Cities For Cytotechnologists In 2025 - Zippia POSITION SUMMARY Responsible for quality and productive microscopic examination and evaluation of gynecological and non-gynecological specimens, primarily for the diagnosis of malignant and pre-malignant conditions. This position may assist with fine needle aspiration collection and NGYN and FNA screening. Proficiency testing and continuing education are required for all cytotechnologists. This position is required to keep daily workload records in accordance with CLIA '88. MINIMUM QUALIFICATIONS • Completion of cytotechnology program from a Commission on Accreditation of Allied Health Education Programs (CAAHEP) school. ASCP certification or eligible required., • Students may be hired at the job title equivalent of a future Cytotechnologist under the following conditions: Student is enrolled in a cytotechnology program at CAAHEP school with a completion date within six (6) months of hire. Student must pass the ASCP Board Certification at the first opportunity but no later than 3 months after program completion, • A Bachelor's degree is required for individuals registered by the ASCP after September 1, 1994., • Good interpersonal and organizational skills required., • This position requires attaining 90% on an internal proficiency test at the time of interview., • This position requires passing annually the required CAP-PT (or approved alternative by CLIA)., • This position requires maintaining 80% proficiency on quarterly GYN CAP mailings as well as 24 continuing education credits each year. PREFERRED QUALIFICATIONS • Additional related education and/or experience preferred. EEO Statement: EEO/Disabled/Veterans Our organization supports a drug-free work environment. Privacy Policy: Privacy Policy

Vibra Travels is seeking a travel nurse RN ICU - Intensive Care Unit for a travel nursing job in Tucson, Arizona. Job Description & Requirements • Specialty: ICU - Intensive Care Unit, • Discipline: RN, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, days Benefits/Perks of working with VIBRA TRAVELS: • Work with 1 recruiter from start to finish and assignment to assignment, • Local and Non-local positions available, • Competitive hourly rate in addition to tax-free stipend (if applicable), • No pay cuts mid-contract, • Referral bonus (up to $1000 per referral!), • License reimbursement if traveling to new state where new license is required, • Your pick of assignments at facilities we own and operate nationwide (70+) or partner facilities Qualifications/Skills: • Current BLS certification from a Vibra-approved vendor required., • Additional certifications may be required by Vibra Travels (ex ACLS, PALS, NRP) Additional Qualifications/Skills: • Previous acute care experience is strongly preferred., • Ability to project a professional image., • Knowledge of regulatory standards and compliance requirements., • Strong organizational, prioritizing and analytical skills., • Ability to make independent decisions when circumstances warrant., • Working knowledge of computer and software applications used in job functions., • Freedom from illegal use of and effects of use of drugs and alcohol in the workplace Per Federal Health Care Worker Vaccine Requirements, all employees must be fully vaccinated against COVID-19 or be approved for a valid religious or medical exemption. Anyone hired by the company must provide proof of their COVID-19 vaccine before they can begin employment or request and be approved for a valid religious or medical exemption. Unvaccinated employees on an approved exemption must submit to weekly COVID-19 testing and wear a respirator at all times while in the facility. Some states and locations require increased frequency testing pursuant to state regulations. Vibra Travels Job ID #20250605-187. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. About Vibra Travels Regardless of the placement you’re seeking, you’ll experience the same great benefits when choosing Vibra Travels for your next contract. White-glove service, every step of the way: At Vibra Travels, we believe in providing top-notch service to our travel nurses. From the moment you first contact us, you’ll experience a level of support and care that sets us apart from the rest. Your recruiter, your partner: Unlike other travel nursing agencies, we believe in building one-on-one relationships with our clinicians. Your dedicated recruiter will be your advocate, guiding you through the entire process and ensuring your needs are met. Clinical support at your fingertips: We understand that being a traveler can sometimes be challenging. That’s why we have a dedicated clinical support team available to answer any questions or concerns you may have during your assignments. Nationwide placements, endless opportunities: With Vibra Travels, you’ll have access to placements across the nation. Whether you’re looking for an acute care, rehabilitation, critical care, or behavioral health hospital, we have opportunities waiting for you in every corner of the country. Join us today and experience traveling done different! Benefits • Holiday Pay, • License and certification reimbursement, • Medical benefits, • Referral bonus

GLC Government Services is seeking highly qualified Registered Nurses for a Government, 1 year long contract position at FCC in Tucson AZ. Location: FCC Tucson, 9300 S. Wilmot Rd., Tucson, AZ 85756 Schedule: Monday – Friday, 40 hours/week between 6AM - 4PM GLC Government Services is seeking experienced Registered Nurses to support the Health Services Department at FCC Tucson. This contract role offers flexible scheduling and a dynamic correctional healthcare environment. Key Responsibilities • Provide direct patient care and administer medications, • Perform venipuncture, EKGs, skin testing, and lab processing, • Support chronic care clinics and emergency response, • Maintain accurate documentation and infection control standards, • Receive patients, explain procedures, and submit evaluations, • Follow Bureau of Prisons Health Services Manual and institutional policies Qualifications • Graduate of accredited RN program, • Active Arizona RN license, • Correctional experience preferred but not required Make a meaningful impact in federal healthcare while working in a secure, structured environment. Apply today to join a team committed to quality care and institutional integrity. Job Types: Full-time, Contract Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Vision insurance

Primary City/State: Tucson, Arizona Department Name: Work Shift: Day Job Category: Phlebotomy Come do great work on behalf of better health! We have a variety of opportunities that work in doctor's offices, outpatient settings, float, and/or even flexible scheduling throughout the valley. These roles are crucial to help our patients receive excellent diagnostic care and we want dedicated people who are here to help our patients. You belong here! • Looking for people who want to work for a purpose, to help patients, to ensure quality diagnostic care, and to be dedicated to ensure our patients are getting the critical health results they need in time to make important health decisions., • We don't just want a phlebotomist. We want someone who understands that behind every lab there is a human being with loved ones who count on them, who also want to make a difference., • Our positions are located all over the valley, Anthem, Maricopa and Casa Grande and include both outpatient Patient Service Centers and Doctors Office environments., • We offer training, comprehensive benefits, generous paid time off, a career ladder and a variety of work opportunities., • We are invested in your Success because we are all invested in our patient's health. POSITION SUMMARY This position may be located within a Hospital Facility, Patient Service Center (PSC), In Office Phlebotomy (IOP) or Mobile Diagnostic Services (MDS). This position may be responsible to provide coverage at multiple locations. This position is responsible for the collection and receipt of biological specimens into the department, their proper entry into the company's computer system, the preparation of samples for analytical testing and/or the distribution of these specimens to the proper analytical area. This includes responsibility for pre and post aspects of analytical testing. This position will also perform specified analytical testing as assigned. Follows the guidelines of the Code of Conduct. Performs all functions according to established policies, procedures, regulatory and accreditation requirements, as well as applicable professional standards. MINIMUM QUALIFICATIONS • Minimum age requirement of 18., • High School diploma or equivalent may be required dependent on state regulatory requirements., • Basic knowledge of department resource materials., • Completion of a phlebotomy program or phlebotomy experience., • Position may require DHS Fingerprinting Certification or the ability to obtain fingerprint certification., • Dependent on department/location, candidate must possess a valid state driver's license in the state of employment and be eligible for coverage under the company auto insurance policy., • Float positions require travel and flexible hours required to work multiple locations and required to cover at mobile phlebotomy facilities/in-office phlebotomy locations with minimal notice. Must be flexible and available based on staffing requirements, weekends, holidays and overtime. May be required to work occasional on-call duties weekends, evenings and early AM., • Progression through career ladder II-IV is subject to completion of career ladder requirements. PREFERRED QUALIFICATIONS • Bilingual (Spanish/English)., • Knowledge of medical terminology., • Additional related education and/or experience. EEO Statement: EEO/Disabled/Veterans Our organization supports a drug-free work environment. Privacy Policy: Privacy Policy

Ardor Health Solutions is seeking a travel Respiratory Therapist for a travel job in Tucson, Arizona. Job Description & Requirements • Specialty: Respiratory Therapist, • Discipline: Allied Health Professional, • Start Date: 11/17/2025, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, days, • Employment Type: Travel \n\t • Location: Tucson, AZ\n\t, • Setting: Hospital\n\t\t, • Employment Type: Traveler\t\n Ardor Health Solutions is looking for a Registered Respiratory Therapist to join our travel team in a Hospital setting, in Tucson, AZ! This is a full time travel contract position. \n\t\t\t\t Requirements include, but are not limited to: \n\t\t\t\t \n\t\t\t\t • Active AZ. Hospital license \n\t\t\t\t, • 2+ years of Registered Respiratory Therapist experience \n\t\t\t\t, • Major Medical \n\t\t\t\t, • Dental/Vision Insurance \n\t\t\t\t, • Pet Insurance \n\t\t\t\t, • Life Insurance with extensive family health options \n\t\t\t\t, • License Reimbursements and processing assistance with our internal licensing department \n\t\t\t\t, • $500 referral bonus Ardor Health Solutions is a Fortune Ranked, award-winning, expanding company that has also recently been ranked the 20th Largest Allied Staffing Firm in the Nation by Staffing Industry Analysts (SIA) and by Fortune`s Great Places to Work Surveys several years in a row. For more information or to be considered, please apply now. \n\n\n\t \n\n\n\nOur Awesome Benefits include:\n\n • Weekly Pay.\n, • Major Medical/Dental and Vision/Pet Insurance on Day 1.\n, • Option to enroll in our FREE Medical Coverage plan for you and your family.\n, • Life Insurance with extensive family health options.\n, • Immediately start accruing Paid Time off as a part of our Shift Gift Program.\n, • Earn an Ardor Appreciation Bonus for EVERY assignment/extension simply for working your contracted hours!\n, • Our Ardor Ambassador Referral Program allows you to make up to 2,000.00 per clinician you refer.\n, • Dedicated Clinical Support on staff – You are never alone on assignment.\n, • License Reimbursements and processing assistance with our internal licensing department.\n, • 24-hour emergency access to our offices.\n\n \n \n \n About Ardor Health Solutions:\n Ardor Health is a Family owned and operated Nursing and Allied staffing agency that has been around since 2001. For over 20 years now our Mission and Vision have been simple – Exceptionalism and Empowerment. We place exceptional clinicians in positions to provide exceptional care. We believe in Empowering our clinicians. You chose your path and one of our Ardor Advocates will empower you on your journey. We do not employ recruiters. We employ advocates. We believe in Pay Package Transparency. You chose your assignment – We are along for ride with you! From Free Insurance options and appreciation end bonuses to immediate accrual of PTO in the form of Shift Gifts, we offer some of the best benefits in the travel staffing industry. We genuinely care about the people we work with. We’re not filling quotas – we’re here to make intimate connections and have your back! Absolutely nothing we do is outsourced. Every function, process, and question you ask is handled by an Ardor Advocate who can greet you with a smile.\n For more information or to be \n COVID-19 vaccination and testing requirements vary by facility. Ardor\n Health adheres to the guidelines and requirements of each facility, as\n well as all applicable federal, state, and local laws.\n Ardor Health Job ID #785366. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Allied Health Professional Respiratory Therapist 3x12 Days About Ardor Health Solutions Ardor Health Solutions formed in 2001 and remains a privately held medical staffing business owned and operated by the same family. Over the years we have expanded our staffing and recruiting capabilities to include therapy services, nursing services, and all allied services. If you would like the personal service that comes with a staff of recruiters that have an average tenure with the company between 5 and 15 years, and the knowledge of our client services representatives with similar experience, there is no need to look any further. At Ardor Health Solutions you can expect better than average pay packages, extraordinary benefits, and the peace of mind that you will not be forgotten once you start your assignment. Perhaps that is why so many of our caregivers have completed more than a dozen different assignments with us over our long history. Ardor Health is pleased to offer a free medical insurance plan in addition to major medical plans. Please contact a recruiter for more details on the free medical plan and/or any other general inquiries. One final fact about Ardor Health Solutions. We have been paying our caregivers weekly since 2001, and we have never, ever, missed a payroll. If you are currently on an assignment with us, thank you. If you have traveled with us before, we would like to welcome you back. If you have never traveled with us, give us a try. You will not be disappointed. Benefits • Weekly pay, • Holiday Pay, • Pet insurance, • Referral bonus, • Employee assistance programs, • Medical benefits, • Dental benefits, • Vision benefits, • Benefits start day 1, • License and certification reimbursement, • Life insurance, • Discount program

Job Description Arizona Interior Maintenance Service LLC dba Maid In Tucson is a reputable and established cleaning company serving Tucson and the surrounding area. We are currently seeking dedicated and detail-oriented House Cleaners to join our professional team. If you take pride in delivering exceptional cleaning services and enjoy creating tidy and comfortable spaces, this opportunity is perfect for you. Shift: Days Only (no nights or weekends) Responsibilities: • Perform thorough and efficient cleaning of clients' homes according to our company's high standards and checklist., • Dusting, vacuuming, sweeping, mopping, and polishing floors as needed., • Clean and sanitize bathrooms, including toilets, sinks, showers, and countertops., • Clean and sanitize kitchen appliances, surfaces, and cabinets to maintain cleanliness and order., • Make beds, change linens, and ensure bedrooms are tidy and organized., • Empty trash cans and dispose of waste in a proper and hygienic manner., • Communicate effectively with clients to understand their specific cleaning needs and preferences., • Follow safety protocols and use appropriate cleaning agents and equipment., • Provide exceptional customer service and address any client concerns or feedback promptly and professionally., • Previous experience in residential or commercial cleaning is preferred but not required. We are willing to train motivated candidates who demonstrate a strong work ethic and willingness to learn., • Attention to detail and the ability to work efficiently and independently., • Excellent time management skills to ensure all tasks are completed within the assigned timeframe., • Strong communication skills and the ability to interact with clients in a courteous and respectful manner., • English speaking required and a valid driver’s license is required., • Must be physically capable of performing cleaning tasks, including lifting and moving furniture or equipment when necessary., • Competitive hourly wages with opportunities for bonuses and tips., • Flexible scheduling to accommodate work-life balance., • Ongoing training and development to enhance your skills and expertise., • Supportive and positive work environment with a focus on teamwork and collaboration., • The opportunity to work with a reputable company known for delivering exceptional cleaning services., • $50,000 no cost term Life Insurance after 90 days Arizona Interior Maintenance Service LLC is a drug and alcohol-free employer; criminal background check and drug testing must be completed upon contingent offer of employment. EOE Arizona Interior Maintenance Service LLC dba Maid In Tucson LLC dba AIMS Cleaning Company DescriptionArizona Interior Maintenance Service, LLC dba Maid In Tucson is a family owned and operated complete cleaning service located in Tucson, Arizona. We first began providing commercial cleaning services to Tucson businesses in 2000. We strive to be the best in our field when it comes to integrity, honesty, and workmanship and are A+ rated with the BBB. We believe that our workforce and our customers are an extension of our family.Arizona Interior Maintenance Service, LLC dba Maid In Tucson is a family owned and operated complete cleaning service located in Tucson, Arizona. We first began providing commercial cleaning services to Tucson businesses in 2000. We strive to be the best in our field when it comes to integrity, honesty, and workmanship and are A+ rated with the BBB. We believe that our workforce and our customers are an extension of our family.

Tenet-AZ Region is seeking a Speech Language Pathologist for a job in Tucson, Arizona. Job Description & Requirements • Specialty: Speech Language Pathologist, • Discipline: Therapy, • Duration: Ongoing, • 40 hours per week, • Shift: 8 hours Welcome to Carondelet Health Network, where making a real difference in people's lives is at the heart of everything we do. Beyond just medical treatments, we believe in the power of genuine connections and heartfelt compassion. It's what sets us apart and makes us truly special. \n\n\n When you join our team, you're not just stepping into a job – you're becoming part of a community that uplifts and supports each other every day. We know that healthcare requires a unique blend of talent and dedication, and we are fully committed to providing an environment that enriches and rewards your journey. \n\n\n Picture yourself among the brightest healthcare professionals, all united by a common purpose: caring for our community with unwavering commitment. At Carondelet, you won't just find colleagues; you'll find awe-inspiring teammates who share your passion for making a meaningful impact. \n\n\n If you're ready to go above and beyond, to embrace the energy and camaraderie that Carondelet Health System offers, then join us on this incredible adventure. Together, we'll create a healthier, happier world – one patient at a time. Let your career find its purpose here at Carondelet. \n\n\n Speech Therapist ASP Full Time Days Position Summary \n\n\n Evaluates, plans, and implements specific treatment programs for individual patients according to the principles and practices of speech language pathology. Functions as an interdisciplinary team member providing patient assessment/re-assessment, direct patient care, and individualized care planning/implementation. Works with neonatal through geriatric patients with clinical competency, as applicable. Completes established competencies for the position within designated introductory period. \n\n\n Responsibilities \n\n\n Responds to physician orders for physical therapy. \n\n\n Administers and interprets tests and measurements of patients. \n\n\n Reviews patient charts and progress prior to treatment and modifies treatment plan accordingly. \n\n\n Develops functional goals based on patient and/or family expectations. \n\n\n Develops, improves, and restores cognitive skills, language comprehension, and language expression skills through comprehensive assessment and testing. \n\n\n Seeks clarification of physician orders as needed. \n\n\n \n\n\n THE SPEECH THERAPIST ASP FULL TIME DAYS CANDIDATE WILL POSSESS THE FOLLOWING EDUCATION, LICENSE/CERTIFICATIONS, AND EXPERIENCE. \n\n\n LICENSURE/CERTIFICATION/REGISTRATION \n\n\n Required: State Licensure and Certificate of Clinical Competence (CCC) from ASHA \n\n\n EDUCATION \n\n\n Required: Master's degree in Speech Language Pathology/Communication Sciences and Disorders \n\n\n WORK EXPERIENCE \n\n\n Required: None \n\n\n Preferred: Competency in performing modified barium swallow exams \n\n\n #LI-SB4 \n Tenet AZ Job ID #2503026751-0. Posted job title: Speech Therapist ASP FT Days

Tenet-AZ Region is seeking a Physical Therapist for a job in Tucson, Arizona. Job Description & Requirements • Specialty: Physical Therapist, • Discipline: Therapy, • Duration: Ongoing, • 40 hours per week, • Shift: 8 hours Up to $10K Bonus Based on Eligibility \n \n Welcome to Carondelet Health Network, where making a real difference in people's lives is at the heart of everything we do. Beyond just medical treatments, we believe in the power of genuine connections and heartfelt compassion. It's what sets us apart and makes us truly special. \n When you join our team, you're not just stepping into a job – you're becoming part of a community that uplifts and supports each other every day. We know that healthcare requires a unique blend of talent and dedication, and we are fully committed to providing an environment that enriches and rewards your journey. \n Picture yourself among the brightest healthcare professionals, all united by a common purpose: caring for our community with unwavering commitment. At Carondelet, you won't just find colleagues; you'll find awe-inspiring teammates who share your passion for making a meaningful impact. \n If you're ready to go above and beyond, to embrace the energy and camaraderie that Carondelet Health System offers, then join us on this incredible adventure. Together, we'll create a healthier, happier world – one patient at a time. Let your career find its purpose here at Carondelet. \n\n \n \n Physical Therapist Full Time Days Position Summary \n Provides Physical Therapy services to patients/clients including assessment, treatment, program planning and implementation, related documentation and communication. The Physical Therapist II has mastered basic technical and organizational physical therapy skills. Has skills in evaluating patient responses and uses past experiences and evidence-based practices in providing care and decision- making. There is a focus on outcomes, and care is delivered using a systematic approach. The Physical Therapist II is able to make independent decisions guided by experience, as well as policies and standards. Consults with other members of the healthcare team when necessary. Maintain acceptable standards of patient care within the clinical area. \n Some weekend work per month required. \n Responsibilities \n \n \n THE PHYSICAL THERAPIST FULL TIME DAYS CANDIDATE WILL POSSESS THE FOLLOWING EDUCATION, LICENSE/CERTIFICATIONS, AND EXPERIENCE. \n Education \n Required: Graduation from an accredited school of Physical Therapy. Minimum of a Bachelor’s Degree. \n Preferred: Doctorate’s in Physical Therapy \n Licensure \n Required: Valid, current license, AZ State Board of Physical Therapy Examiners \n Certificates \n Required: CPR-BLS \n Experience \n Required: 1 year experience as a licensed Physical Therapist working in the field of Physical Therapy \n Preferred: Prior patient exposure in area of practice \n Skills \n Required: Verbal and written communication skills \n Knowledge \n Required: Knowledge of Physical Therapy theory and practice. \n Technology \n Required: Basic computer skills \n Preferred: Microsoft Office programs \n Other \n Required: Must be able to work flexible hours, holidays and/or weekends. Must be able to transport self to various work sites. When using own vehicle must have valid Arizona drivers’ license and proof of insurance that meets the minimum standard for the state of Arizona \n Preferred: Bilingual English / Spanish \n #LI-CN1 \n \n \n \n Tenet AZ Job ID #2403032594-11. Posted job title: Physical Therapist FT Days

Job Description Join the Sargent Legacy in Securing Our Future With continual growth comes opportunity and Sargent has an immediate opening for an Inspector III. Position Summary Inspects and reports on materials, processes and products using variable or attribute measuring instruments and techniques to assure conformance with the Sargent quality standards. Develops Inspection plans, Mentors and provides training for other inspectors as directed. Responsibilities • Promote Safety to all team members, Customers and Suppliers., • Perform, in-process and final inspections on complex machined parts and detailed final assemblies., • Perform receiving inspection on incoming product., • Proficient in dimensional inspection using all inspection tools to include optical comparators., • Is proficient in the use of CMM's and Vision Systems to include limited programming., • Interpret drawings, certifications and military/industry specifications. The ability to apply GD&T., • Create and complete first articles to AS9102., • Trains and mentors less experienced inspectors., • Performs Supplier Source Inspection as assigned., • High School Diploma or GED., • Experience in an ISO9001/AS9100 manufacturing environment., • A minimum of 6 years of experience in a manufacturing environment with demonstrated mechanical inspection background., • Advanced measurement skills using micrometers, calipers, height gages, bore gages and optical comparators., • Minimum 3 years' experience operating CMM's., • Advanced GD&T understanding., • Ability to read and interpret drawings and specifications., • Must possess basic math skills and have good reading comprehension., • Basic computer skills., • Proficient with applicable computer programs, including Microsoft Excel, Word and Outlook., • Must be able to make decisions, communicate effectively and work with others., • Must be a team player, self-starter, problem solver and adaptable., • An AS degree in Applied Technology with Quality Assurance or other applicable technical discipline., • 8 years of Quality Assurance experience in and ISO9001/AS9100 manufacturing environment., • ASQ Certified Quality Inspector. RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components and essential systems for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing and manufacturing capabilities for the diversified industrial, aerospace and defense markets. RBC currently has 56 facilities, of which 37 are manufacturing facilities in ten countries and the market capitalization is approximately $6.2 billion. In 2015, RBC acquired Sargent Aerospace and Defense. Founded in 1920, Sargent Aerospace & Defense leverages 100 years of expertise as a premier global supplier of precision engineered customized components that directly contributes to the safe operation of countless commercial and military aircraft, rotorcraft, submarines and land-based vehicles. At Sargent, our mission is to secure our future by making the challenging a reality. We achieve this by delivering high quality products and services that meet customer requirements and exceed customer expectations through employee development, customer focus and continual improvement. Sargent’s continuing investment in people, assets, technology, and process quality ensures excellence and is integral to the company’s commitment to customers and their end-users. As we grow, we will continue to root our culture through our core values of Integrity, Respects & Values People, Customer Focus, Teamwork, Results Focus and Continual Improvement. Company Benefits Include: • Competitive Compensation, • Bonus platforms, • Holidays/Vacation/Sick Time, • 401k Savings & Investment Plan, • Tuition Reimbursement, • Medical/Dental/Vision Plans, • HSA/FSA, • Life & Disability Insurance, • Accident/Hospital/Critical Care Plans, • Pet Insurance, • Gym & Rideshare Incentives, • Legal Insurance/Identity Theft, • Flexible Schedules, • 3 & 4-day work week, • Integrity - We do the right thing the right way. Our ideal candidate is ethical, honest in all interactions, delivers good news and bad, and follows through on commitments. Key Skills & Abilities is fair, credible, confidential, fiscally responsible and accountable for decisions and actions., • Respects and Values People - We encourage and bring out the potential of others. Our ideal candidate embraces diversity, recognizes and supports the accomplishments, talents and development of others. Key Skills & Abilities is committed to the building of strong relationships and creates an environment of trust and mutual respect., • Customer Focus - We act with excellence in each and every interaction. Our ideal candidate builds strong internal/external customer relationships and goes above and beyond to deliver high quality products and services on time, every time. Key Skills & Abilities is responsive with strong customer service skills, product and job knowledge to provide excellent customer satisfaction., • Teamwork - We are better together. Our ideal candidate is inclusive, engaged and collaborative, sharing information, ideas and experiences to accomplish goals, improve decision making and leverage capabilities. Key Skills & Abilities is a dependable team player, demonstrated through attendance and punctuality, works well with others and has strong communication skills (both oral & written) to keep all stakeholders informed., • Results Focus - We focus on the outcome, not the obstacle. Our ideal candidate must have a strong work ethic with a results/performance driven track record in a fast paced, changing and challenging environment. Key Skills & Abilities is adaptable, works with a sense of urgency and high level of initiative and demonstrates a commitment to quality with attention to detail., • Continual Improvement - We encourage and drive innovation. Our ideal candidate must be naturally curious, passionate and never satisfied with the status quo. Key Skills & Abilities is innovative and has a problem-solving mindset that provides and implements CI ideas. EEO/AA/F/M/Vet/Disabled #zr

Job Description Join the Sargent Legacy in Securing Our Future With continual growth comes opportunity and Sargent has an immediate opening for an Inspector II. Purpose & Scope Inspects and reports on materials, processes and products using variable or attribute measuring instruments and techniques to assure conformance with the Sargent quality standards. Roles & Responsibilities: • Promote Safety to all team members, Customers and Suppliers., • Perform, in-process and final inspections for machine shop and production product., • Perform receiving inspection on incoming product., • Performs dimensional inspection using calipers, micrometers, bore gages, height gages, and more complex tools as required., • Interpret drawings, certifications, and military/industry specifications., • Create and complete first articles to AS9102., • Trains and mentors less experienced inspectors., • High School Diploma or GED., • Experience in an ISO9001/AS9100 manufacturing environment., • A minimum of 4 years of experience in a manufacturing environment with demonstrated mechanical inspection background., • Basic measurement skills using micrometers, calipers, height gages, bore gages and optical comparators., • Basic GD&T understanding., • Ability to read and interpret drawings and specifications., • Must possess basic math skills and have good reading comprehension., • Basic computer skills., • Proficient with applicable computer programs, including Microsoft Excel, Word and Outlook., • Must be able to make decisions, communicate effectively and work with others., • Must be a team player, self-starter, problem solver and adaptable., • Must be a U.S. citizen. Preferred Job Knowledge, Skills & Experience: • Continued education (College Course Work, Technical Studies, Seminar Completion)., • 6 years of Quality Assurance experience in and ISO9001/AS9100 manufacturing environment., • A general knowledge of applicable QMS standards, including ISO9001 and AS9100. RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components, and essential systems for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing, and manufacturing capabilities for the diversified industrial, aerospace and defense markets. RBC currently has 56 facilities, of which 37 are manufacturing facilities in ten countries and the market capitalization is approximately $6.2 billion. In 2015, RBC acquired Sargent Aerospace and Defense. Founded in 1920, Sargent Aerospace & Defense leverages 100 years of expertise as a premier global supplier of precision engineered customized components that directly contributes to the safe operation of countless commercial and military aircraft, rotorcraft, submarines, and land-based vehicles. At Sargent, our mission is to secure our future by making the challenging a reality. We achieve this by delivering high quality products and services that meet customer requirements and exceed customer expectations through employee development, customer focus and continual improvement. Sargent’s continuing investment in people, assets, technology, and process quality ensures excellence and is integral to the company’s commitment to customers and their end-users. As we grow, we will continue to root our culture through our core values of Integrity, Respects & Values People, Customer Focus, Teamwork, Results Focus and Continual Improvement. Company Benefits Include: • Competitive Compensation, • Bonus platforms, • Holidays/Vacation/Sick Time, • 401k Savings & Investment Plan, • Tuition Reimbursement, • Medical/Dental/Vision Plans, • HSA/FSA, • Life & Disability Insurance, • Accident/Hospital/Critical Care Plans, • Pet Insurance, • Gym & Rideshare Incentives, • Legal Insurance/Identity Theft, • Flexible Schedules, • 3 & 4-day work week, • Integrity - We do the right thing the right way. Our ideal candidate is ethical, honest in all interactions, delivers good news and bad, and follows through on commitments. Key Skills & Abilities is fair, credible, confidential, fiscally responsible, and accountable for decisions and actions., • Respects and Values People - We encourage and bring out the potential of others. Our ideal candidate embraces diversity, recognizes, and supports the accomplishments, talents, and development of others. Key Skills & Abilities is committed to the building of strong relationships and creates an environment of trust and mutual respect., • Customer Focus - We act with excellence in each and every interaction. Our ideal candidate builds strong internal/external customer relationships and goes above and beyond to deliver high quality products and services on time, every time. Key Skills & Abilities is responsive with strong customer service skills, product, and job knowledge to provide excellent customer satisfaction., • Teamwork - We are better together. Our ideal candidate is inclusive, engaged and collaborative, sharing information, ideas, and experiences to accomplish goals, improve decision making and leverage capabilities. Key Skills & Abilities is a dependable team player, demonstrated through attendance and punctuality, works well with others, and has strong communication skills (both oral & written) to keep all stakeholders informed., • Results Focus - We focus on the outcome, not the obstacle. Our ideal candidate must have a strong work ethic with a results/performance driven track record in a fast paced, changing, and challenging environment. Key Skills & Abilities is adaptable, works with a sense of urgency and high level of initiative and demonstrates a commitment to quality with attention to detail., • Continual Improvement - We encourage and drive innovation. Our ideal candidate must be naturally curious, passionate, and never satisfied with the status quo. Key Skills & Abilities is innovative and has a problem-solving mindset that provides and implements CI ideas. EEO/AA/F/M/VET/DISABLED #zr

Job DescriptionCompany Description Segula Technologies is a global engineering and consulting firm specializing in innovative solutions across industries such as aerospace, automotive, energy, rail, and life sciences. Founded in 1985 and headquartered in France, Segula operates in over 30 countries, driving technological advancements, improving industrial performance, and supporting clients throughout the product lifecycle. With expertise in design, manufacturing, testing, and project management, Segula helps businesses tackle complex engineering challenges while fostering innovation and sustainability. Job Description • Adhere to General Work Requirements as required in coordination with Quality leadership., • Research and capture all maintenance program requirements to include Inspection Program, Airworthiness Directives, Service Bulletins, Instructions for Continued Airworthiness, etc. to establish comprehensive and accurate listings of requirements for specific model aircraft., • Research all maintenance documentation for an aircraft and conduct necessary on-aircraft inspections to construct an accurate configuration of specific aircraft., • Utilize research to establish aircraft maintenance requirements pertinent to customer visit and organize the results into an understandable report for delivery to customer., • Supports Quality Inspectors by performing Quality Inspector duties and returning A/C to service when requested from Quality Leadership., • Ensure all work packages (orders and forms) as well as records of arrival, maintenance and corrective actions performed, are documented accurately and that all specialized customer (RED, RFE & SRPSA) and regulatory paperwork (FAA, FAR/CAA, etc) is complete and required approvals have been obtained., • Perform walk around inspection of aircraft for release from maintenance., • Perform return to service process and ensure assigned aircraft meets all airworthiness requirements prior to return to service., • Train, coach and mentor employees in the performance of duties in area(s) of qualification., • Provide data to customers as requested. Qualifications, • US Citizenship or authorized to work in the U.S. without visa sponsorship, • You hold a current and valid FAA Airframe and Powerplant License., • You bring at least 5 years of hands-on maintenance experience working on corporate or commercial jets., • You’ve worked on Bombardier aircraft for at least 1 year., • You have at least 1 year of experience as a Quality Inspector in an aviation maintenance environment., • You’re skilled at planning and problem-solving, ensuring that challenges are resolved efficiently and commitments are met., • You make decisions with a strategic mindset, keeping broader business goals in view while seizing opportunities., • You thrive in a team-based environment, working well with others to get the job done., • You have a strong “Get It Done” attitude, staying focused and driving results—even in the face of change., • You're customer-focused, committed to understanding needs and building strong internal and external relationships., • You’re passionate about growth and development—both your own and that of those around you., • You’re comfortable using a wide range of measuring tools and hand tools, and can operate and interpret test equipment with confidence., • You understand and can apply domestic and international regulatory requirements (FAR, CAA, RSM/QCM, FAA, AD, SB, CFR, TCDS, etc.)., • You’re proficient with essential software tools such as Excel, Access, Word, Quality Maintenance Tracking systems, SAP, AMS, and internet-based platforms., • You have a thorough understanding of return-to-service procedures and the relevant SAP applications involved., • You communicate clearly and effectively in English—both spoken and written., • You have the ability to train, coach, and mentor others, helping team members grow and succeed in their roles. Additional Information Here’s a heads-up of the upcoming steps: • Phone Interview with Recruiter: We’ll begin with an introductory call to discuss your background and interest in the role., • Interview with the Hiring Manager, • Offer Letter: We´ll extend you an offer and start the onboarding process., • Background Check & DOT Drug Screen: This step involves conducting a comprehensive background check, which includes reviewing criminal history, and other relevant records. Additionally, a Department of Transportation (DOT) drug screening will be carried out to ensure compliance with federal regulations for safety-sensitive positions, • You start your next challenge!

Job Description Join the Sargent Legacy in Securing Our Future With continual growth comes opportunity and Sargent has an immediate opening for a Manufacturing Quality Inspector II. Purpose & Scope Inspects and reports on materials, processes and products using variable or attribute measuring instruments and techniques to assure conformance with the Sargent quality standards. Roles & Responsibilities: • Promote Safety to all team members, Customers and Suppliers., • Perform, in-process and final inspections for machine shop and production product., • Perform receiving inspection on incoming product., • Performs dimensional inspection using calipers, micrometers, bore gages, height gages, and more complex tools as required., • Interpret drawings, certifications, and military/industry specifications., • Create and complete first articles to AS9102., • Trains and mentors less experienced inspectors., • High School Diploma or GED., • Experience in an ISO9001/AS9100 manufacturing environment., • A minimum of 4 years of experience in a manufacturing environment with demonstrated mechanical inspection background., • Basic measurement skills using micrometers, calipers, height gages, bore gages and optical comparators., • Basic GD&T understanding., • Ability to read and interpret drawings and specifications., • Must possess basic math skills and have good reading comprehension., • Basic computer skills., • Proficient with applicable computer programs, including Microsoft Excel, Word and Outlook., • Must be able to make decisions, communicate effectively and work with others., • Must be a team player, self-starter, problem solver and adaptable., • Must be a U.S. citizen. Preferred Job Knowledge, Skills & Experience: • Continued education (College Course Work, Technical Studies, Seminar Completion)., • 6 years of Quality Assurance experience in and ISO9001/AS9100 manufacturing environment., • A general knowledge of applicable QMS standards, including ISO9001 and AS9100. RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components, and essential systems for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing, and manufacturing capabilities for the diversified industrial, aerospace and defense markets. RBC currently has 56 facilities, of which 37 are manufacturing facilities in ten countries and the market capitalization is approximately $6.2 billion. In 2015, RBC acquired Sargent Aerospace and Defense. Founded in 1920, Sargent Aerospace & Defense leverages 100 years of expertise as a premier global supplier of precision engineered customized components that directly contributes to the safe operation of countless commercial and military aircraft, rotorcraft, submarines, and land-based vehicles. At Sargent, our mission is to secure our future by making the challenging a reality. We achieve this by delivering high quality products and services that meet customer requirements and exceed customer expectations through employee development, customer focus and continual improvement. Sargent’s continuing investment in people, assets, technology, and process quality ensures excellence and is integral to the company’s commitment to customers and their end-users. As we grow, we will continue to root our culture through our core values of Integrity, Respects & Values People, Customer Focus, Teamwork, Results Focus and Continual Improvement. Company Benefits Include: • Competitive Compensation, • Bonus platforms, • Holidays/Vacation/Sick Time, • 401k Savings & Investment Plan, • Tuition Reimbursement, • Medical/Dental/Vision Plans, • HSA/FSA, • Life & Disability Insurance, • Accident/Hospital/Critical Care Plans, • Pet Insurance, • Gym & Rideshare Incentives, • Legal Insurance/Identity Theft, • Flexible Schedules, • 3 & 4-day work week, • Integrity - We do the right thing the right way. Our ideal candidate is ethical, honest in all interactions, delivers good news and bad, and follows through on commitments. Key Skills & Abilities is fair, credible, confidential, fiscally responsible, and accountable for decisions and actions., • Respects and Values People - We encourage and bring out the potential of others. Our ideal candidate embraces diversity, recognizes, and supports the accomplishments, talents, and development of others. Key Skills & Abilities is committed to the building of strong relationships and creates an environment of trust and mutual respect., • Customer Focus - We act with excellence in each and every interaction. Our ideal candidate builds strong internal/external customer relationships and goes above and beyond to deliver high quality products and services on time, every time. Key Skills & Abilities is responsive with strong customer service skills, product, and job knowledge to provide excellent customer satisfaction., • Teamwork - We are better together. Our ideal candidate is inclusive, engaged and collaborative, sharing information, ideas, and experiences to accomplish goals, improve decision making and leverage capabilities. Key Skills & Abilities is a dependable team player, demonstrated through attendance and punctuality, works well with others, and has strong communication skills (both oral & written) to keep all stakeholders informed., • Results Focus - We focus on the outcome, not the obstacle. Our ideal candidate must have a strong work ethic with a results/performance driven track record in a fast paced, changing, and challenging environment. Key Skills & Abilities is adaptable, works with a sense of urgency and high level of initiative and demonstrates a commitment to quality with attention to detail., • Continual Improvement - We encourage and drive innovation. Our ideal candidate must be naturally curious, passionate, and never satisfied with the status quo. Key Skills & Abilities is innovative and has a problem-solving mindset that provides and implements CI ideas. EEO/AA/F/M/VET/DISABLED

Job Description Certerra is a growing national provider of testing, inspection, and certification services that support innovation in new product development, quality assurance, for project delivery, and engineered solutions for asset management. We are passionate about contributing to the sustainable development of the communities we serve. We are a national firm with a global reach serving national and international clients from 30+ offices located in 10 states and are ranked on ENR’s Top 500 list alongside the nation’s top firms. With a 60-year history, Certerra has a passion for high-end services, constant innovation, and investment in the development of world-class laboratory facilities, and interactive management technologies. Each member of our staff is committed to service, innovation, and the success of our clients. This Opportunity: We have immediate full-time career opportunities for ICC Special Inspectors in several of our offices. Certerra offers on-going training and the ability to gain valuable career experience and technical certifications. Job Duties Candidate will have experience performing construction testing and inspection of soil, concrete, masonry, steel with ICC certifications. Also reinforced concrete, pre-stressed concrete, structural masonry, structural steel and or spray-applied fireproofing. Job Requirements • Strong work ethic and ability to work as a team player, • Capable of working independently, • Strong communication and detailed writing skills, • Valid driver’s license with clean driving record, • Ability to lift and carry 30 to 50 lbs. and 80 lbs. periodically, • Basic math and writing skills, • Involves outside work in various weather conditions, available to work irregular and weekend hours., • Ability to pass a drug screen Required & Preferred Education & Experience • High school diploma or equivalent, • Ability to communicate clearly and politely with clients Certifications that could be applicable for this position: • ACI – American Concrete Institute Field or Laboratory, • ICC – International Code Council, • NICET – National Institution for Certification in Engineering Technologies, • WAQTC and ACNM TTCP Physical Demands • Physical examination required to obtain medical clearance to work, • Ability to stoop, kneel and to routinely lift and carry 50 pounds, • Clean driving record and capable of being insured for driving company vehicles, • Able to work in variable outside conditions, including extreme heat or cold if need We are an Equal Opportunity Employer. This Company is dedicated to both the letter and the spirit of the equal opportunity employment laws. All applicants and all employees will be evaluated on the basis of their ability, competence, and performance of the essential functions of their positions. There will be no discrimination on the basis of race, sex, national origin, religion, age 40 and over, disability, sexual orientation, marital status, or any other classification which may be protected by federal, state, or local laws. In compliance with the Americans with Disabilities Act, we specifically offer equal opportunity for all employees or job applicants who may have a physical or mental disability. Such persons will be hired on the basis of their ability to perform the essential functions of the job in question. Likewise, their work will be evaluated on their performance of these essential functions. We will offer reasonable accommodation to individuals with disabilities, to the extent that Company resources allow without undue hardship. As part of our equal employment policy, there will be no wage differentials based on gender, between men and women employed in the same establishment, on jobs that require equal skill, effort, and responsibility, and which are performed under similar working conditions.

Job Description Certerra is a growing national provider of testing, inspection, and certification services that support innovation in new product development, quality assurance, for project delivery, and engineered solutions for asset management. We are passionate about contributing to the sustainable development of the communities we serve. We are a national firm with a global reach serving national and international clients from 30+ offices located in 10 states and are ranked on ENR’s Top 500 list alongside the nation’s top firms. With a 60-year history, Certerra has a passion for high-end services, constant innovation, and investment in the development of world-class laboratory facilities, and interactive management technologies. Each member of our staff is committed to service, innovation, and the success of our clients. This Opportunity: We have immediate full-time career opportunities for a Level II NDT/ CWI Technician in several of our offices. Certerra offers on-going training and the ability to gain valuable career experience and technical certifications. Job Duties • Test and inspect using NDT and or CWI procedures on construction job sites., • Prepare daily reports on observation and testing activities, • Review reports and test data for accuracy and completeness Job Requirements: Candidate must have a minimum qualification of Level II certifications: CWI Gamma Radiography Testing (RT) Magnetic Particle Testing (MT) Candidate must meet the following minimum requirements: Work related experience in utility and/or industrial construction Current State card or ASNT-IRRSP Documented education and on-the-job training Good communication and report writing skills Clean motor vehicle record Pass a pre-employment drug screen Complete a FBI fingerprint criminal background check or TWIC card Additional preference given for candidates with the following certifications: Certified Welding Inspector (AWS) Ultrasonic (SWUT / PAUT) Liquid Penetrant (PT) Physical Demands • Physical examination required to obtain medical clearance to work, • Ability to stoop, kneel and to routinely lift and carry 50 pounds, • Clean driving record and capable of being insured for driving company vehicles, • Able to work in variable outside conditions, including extreme heat or cold if need We are an Equal Opportunity Employer. This Company is dedicated to both the letter and the spirit of the equal opportunity employment laws. All applicants and all employees will be evaluated on the basis of their ability, competence, and performance of the essential functions of their positions. There will be no discrimination on the basis of race, sex, national origin, religion, age 40 and over, disability, sexual orientation, marital status, or any other classification which may be protected by federal, state, or local laws. In compliance with the Americans with Disabilities Act, we specifically offer equal opportunity for all employees or job applicants who may have a physical or mental disability. Such persons will be hired on the basis of their ability to perform the essential functions of the job in question. Likewise, their work will be evaluated on their performance of these essential functions. We will offer reasonable accommodation to individuals with disabilities, to the extent that Company resources allow without undue hardship. As part of our equal employment policy, there will be no wage differentials based on gender, between men and women employed in the same establishment, on jobs that require equal skill, effort, and responsibility, and which are performed under similar working conditions.

Job DescriptionDescription: Company Overview: ARCXIS, headquartered in Houston, Texas, is the leading provider of inspection, design, engineering, energy efficiency, and quality assurance services for the U.S. residential construction industry. With a nationwide presence, ARCXIS serves builders across the continental United States, delivering innovative solutions that enhance efficiency, performance, and compliance in new home construction. Our national team brings together years of expertise, offering a comprehensive suite of services that support builders in constructing high-quality, high-performance, energy-efficient homes. Through cutting-edge technology, industry knowledge, and a commitment to excellence, ARCXIS continues to set the standard for residential construction services. To learn more, visit Position Overview: The focus of this position is verification of newly constructed homes to HERS, EPA's ENERGY STAR Program, Federal Incentives/National Programs, and other Utility Programs. The Field Inspector is responsible for performing inspections at residential development sites. The primary customers for these services are large production home builders. Field Inspectors interface with a Field Coordinator to assess the daily schedule, perform diagnostic testing on scheduled communities while coordinating with job superintendent, sub-contractors and city inspectors. Coordination and communication with the Field Coordinator and Operations Manager regarding the status of job sites must be frequent, clear, complete, and is critical. Essential Job Duties/Responsibilities: • Performing field inspections and HERS compliance testing for new construction builders., • Travel daily to multiple job sites, • Completing daily inspection reports of inspections, • Communicate inefficiencies to job superintendents and educate them and their trades on correction items., • High School Diploma or AA Degree, • Two (2) years of construction experience and/or one (1) year of field experience supported with degree in related field of study, • HERS- Rater Certification preferred, or obtained within 3 months of hire, • ENERGY STAR for Homes preferred, • Photovoltaic Inspector Certification preferred, • OSHA 10-Hour Training Course Certification preferred, • HVAC installation or technical experience preferred, • We are looking for a self-motivated person who is highly detail oriented with excellent communication skills and who is passionate about getting their job done right., • Experience in green building programs such as LEED, Build-it-Green, Energy Star would be preferable., • Reliable transportation is required to accommodate testing equipment and a ladder. This role may involve driving over 80-120 miles per day. Candidates must have and maintain the following: a valid driver’s license, a clean driving record, and state-minimum auto insurance. To support your travel needs, the company provides an auto allowance to help cover maintenance costs and a fuel card for company-related travel., • Candidate must be able to conduct multiple inspections each day,, • Must have solid communication skills, and able to convey direction and leadership while enforcing Energy Code to project Superintendents and their trades. Good attitude and personality a must., • Basic Computer skills, • Several years of construction experience, • Can read building plans Generally Monday – Friday day shift, however additional hours, including weekend hours, may be required in accordance with changing business needs. Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Referral program, • Vision insurance, • Fuel card for business related travel and auto allowance, • Training wage is $20.00 per hour. Once fully trained and certified, this position will transition to a production (piece work) pay compensation model. Estimated pay for this is $50,000 - $80,000 per year, depending on performance.

Job Description Join the Sargent Legacy in Securing Our Future With continual growth comes opportunity and Sargent has an immediate opening for an Inspector II. Purpose & Scope Inspects and reports on materials, processes and products using variable or attribute measuring instruments and techniques to assure conformance with the Sargent quality standards. Roles & Responsibilities: • Promote Safety to all team members, Customers and Suppliers., • Perform, in-process and final inspections for machine shop and production product., • Perform receiving inspection on incoming product., • Performs dimensional inspection using calipers, micrometers, bore gages, height gages, and more complex tools as required., • Interpret drawings, certifications, and military/industry specifications., • Create and complete first articles to AS9102., • Trains and mentors less experienced inspectors., • High School Diploma or GED., • Experience in an ISO9001/AS9100 manufacturing environment., • A minimum of 4 years of experience in a manufacturing environment with demonstrated mechanical inspection background., • Basic measurement skills using micrometers, calipers, height gages, bore gages and optical comparators., • Basic GD&T understanding., • Ability to read and interpret drawings and specifications., • Must possess basic math skills and have good reading comprehension., • Basic computer skills., • Proficient with applicable computer programs, including Microsoft Excel, Word and Outlook., • Must be able to make decisions, communicate effectively and work with others., • Must be a team player, self-starter, problem solver and adaptable., • Must be a U.S. citizen. Preferred Job Knowledge, Skills & Experience: • Continued education (College Course Work, Technical Studies, Seminar Completion)., • 6 years of Quality Assurance experience in and ISO9001/AS9100 manufacturing environment., • A general knowledge of applicable QMS standards, including ISO9001 and AS9100. RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components, and essential systems for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing, and manufacturing capabilities for the diversified industrial, aerospace and defense markets. RBC currently has 56 facilities, of which 37 are manufacturing facilities in ten countries and the market capitalization is approximately $6.2 billion. In 2015, RBC acquired Sargent Aerospace and Defense. Founded in 1920, Sargent Aerospace & Defense leverages 100 years of expertise as a premier global supplier of precision engineered customized components that directly contributes to the safe operation of countless commercial and military aircraft, rotorcraft, submarines, and land-based vehicles. At Sargent, our mission is to secure our future by making the challenging a reality. We achieve this by delivering high quality products and services that meet customer requirements and exceed customer expectations through employee development, customer focus and continual improvement. Sargent’s continuing investment in people, assets, technology, and process quality ensures excellence and is integral to the company’s commitment to customers and their end-users. As we grow, we will continue to root our culture through our core values of Integrity, Respects & Values People, Customer Focus, Teamwork, Results Focus and Continual Improvement. Company Benefits Include: • Competitive Compensation, • Bonus platforms, • Holidays/Vacation/Sick Time, • 401k Savings & Investment Plan, • Tuition Reimbursement, • Medical/Dental/Vision Plans, • HSA/FSA, • Life & Disability Insurance, • Accident/Hospital/Critical Care Plans, • Pet Insurance, • Gym & Rideshare Incentives, • Legal Insurance/Identity Theft, • Flexible Schedules, • 3 & 4-day work week, • Integrity - We do the right thing the right way. Our ideal candidate is ethical, honest in all interactions, delivers good news and bad, and follows through on commitments. Key Skills & Abilities is fair, credible, confidential, fiscally responsible, and accountable for decisions and actions., • Respects and Values People - We encourage and bring out the potential of others. Our ideal candidate embraces diversity, recognizes, and supports the accomplishments, talents, and development of others. Key Skills & Abilities is committed to the building of strong relationships and creates an environment of trust and mutual respect., • Customer Focus - We act with excellence in each and every interaction. Our ideal candidate builds strong internal/external customer relationships and goes above and beyond to deliver high quality products and services on time, every time. Key Skills & Abilities is responsive with strong customer service skills, product, and job knowledge to provide excellent customer satisfaction., • Teamwork - We are better together. Our ideal candidate is inclusive, engaged and collaborative, sharing information, ideas, and experiences to accomplish goals, improve decision making and leverage capabilities. Key Skills & Abilities is a dependable team player, demonstrated through attendance and punctuality, works well with others, and has strong communication skills (both oral & written) to keep all stakeholders informed., • Results Focus - We focus on the outcome, not the obstacle. Our ideal candidate must have a strong work ethic with a results/performance driven track record in a fast paced, changing, and challenging environment. Key Skills & Abilities is adaptable, works with a sense of urgency and high level of initiative and demonstrates a commitment to quality with attention to detail., • Continual Improvement - We encourage and drive innovation. Our ideal candidate must be naturally curious, passionate, and never satisfied with the status quo. Key Skills & Abilities is innovative and has a problem-solving mindset that provides and implements CI ideas. EEO/AA/F/M/VET/DISABLED

Job Description Join the Sargent Legacy in Securing Our Future This will be a 2nd Shift position - Mon-Thu 1:30 pm - 12:00 am. With continual growth comes opportunity and Sargent has an immediate opening for a Test Tech III - 2nd Shift. Position Summary This position supports operational excellence in the building and testing of hydraulic components. This role entails collaboration with various members of the Sargent hydraulics team to meet organizational goals while furthering productivity, quality, and continuous improvement. The primary functions of this position are to assemble and test hydraulic components. Responsibilities • Maintain a clean and safe work area at all times., • Promote a culture of Continual Improvement by utilizing Lean Six Sigma methodologies to drive quality improvements, reduce manufacturing cost, minimize waste and improve efficiency., • Ensure that all work performed complies with Sargent procedures, drawings, work instructions, Foreign Object Debris (FOD), tooling control standards and quality policies, as well as customer and regulatory requirements., • Record and report necessary technical data using Sargent approved documentation., • Verify that proper equipment is used and is sufficient for work performed; verify that all calibration requirements are met., • Works with Design and Manufacturing Engineering providing technical support and to improve the assembly and test process., • Performs sub/lower-level assemblies., • Performs tear down and assembles various hydraulic control valves and actuators., • Performs tear down, assemble and tests various hydraulic control valves and actuators ., • Build required test setup per acceptance test procedure & hydraulic schematic., • Ability to setup and test electrical control boxes and L.V.D.Ts., • Ability to run, operate and understand data acquisition results., • Ability to set up data acquisition hardware., • Mentor less experienced Technicians., • Performs top tier assembly and testing., • Performs complex first time build and test. Minimum Qualifications • High School Diploma or GED required., • Minimum three (3) plus years combined experience in tear down, inspection, assembly, test, repair/overhaul or troubleshooting of hydraulic, servo (marine), actuators (aero) pneumatic. Equivalent education and/or practical experience may be substituted from a mechanical, manufacturing, or military background., • Ability to lift 40lbs. Obtain help when lifting over 40lbs or when lifting is awkward for one person to lift safely., • Ability to use hand tools., • Ability to read and understand blueprints, engineering drawings and hydraulic schematics., • Mechanical ability demonstrated through employment, projects, or hobbies., • Utilize MS Office, specifically Excel, Word, PowerPoint and Outlook., • Ability to work effectively and cooperatively within a multifaceted production team., • Ability to work in a fast-paced environment in order to meet scheduling and customer deadlines., • Must be detail oriented and complete work accurately., • Must be available to work overtime and weekends as required., • Attendance and punctuality at work are essential functions of this position., • Must be a U.S. Citizen., • Basic knowledge and utilization of Lean and Six Sigma Principles. Preferred Qualifications • Experience in a Manufacturing Aerospace, Defense or other regulated industry., • Experience in tear down, inspection, assembly, test, repair/overhaul or troubleshooting of hydraulic, pneumatic, or electrical equipment. RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components, and essential systems for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing, and manufacturing capabilities for the diversified industrial, aerospace and defense markets. RBC currently has 56 facilities, of which 37 are manufacturing facilities in ten countries and the market capitalization is approximately $6.2 billion. In 2015, RBC acquired Sargent Aerospace and Defense. Founded in 1920, Sargent Aerospace & Defense leverages 100 years of expertise as a premier global supplier of precision engineered customized components that directly contributes to the safe operation of countless commercial and military aircraft, rotorcraft, submarines, and land-based vehicles. At Sargent, our mission is to secure our future by making the challenging a reality. We achieve this by delivering high quality products and services that meet customer requirements and exceed customer expectations through employee development, customer focus and continual improvement. Sargent’s continuing investment in people, assets, technology, and process quality ensures excellence and is integral to the company’s commitment to customers and their end-users. As we grow, we will continue to root our culture through our core values of Integrity, Respects & Values People, Customer Focus, Teamwork, Results Focus and Continual Improvement. Company Benefits Include: • Competitive Compensation, • Bonus platforms, • Holidays/Vacation/Sick Time, • 401k Savings & Investment Plan, • Tuition Reimbursement, • Medical/Dental/Vision Plans, • HSA/FSA, • Life & Disability Insurance, • Accident/Hospital/Critical Care Plans, • Pet Insurance, • Gym & Rideshare Incentives, • Legal Insurance/Identity Theft, • Flexible Schedules, • 3 & 4-day work week, • Integrity - We do the right thing the right way. Our ideal candidate is ethical, honest in all interactions, delivers good news and bad, and follows through on commitments. Key Skills & Abilities is fair, credible, confidential, fiscally responsible, and accountable for decisions and actions., • Respects and Values People - We encourage and bring out the potential of others. Our ideal candidate embraces diversity, recognizes, and supports the accomplishments, talents, and development of others. Key Skills & Abilities is committed to the building of strong relationships and creates an environment of trust and mutual respect., • Customer Focus - We act with excellence in each and every interaction. Our ideal candidate builds strong internal/external customer relationships and goes above and beyond to deliver high quality products and services on time, every time. Key Skills & Abilities is responsive with strong customer service skills, product, and job knowledge to provide excellent customer satisfaction., • Teamwork - We are better together. Our ideal candidate is inclusive, engaged and collaborative, sharing information, ideas, and experiences to accomplish goals, improve decision making and leverage capabilities. Key Skills & Abilities is a dependable team player, demonstrated through attendance and punctuality, works well with others, and has strong communication skills (both oral & written) to keep all stakeholders informed., • Results Focus - We focus on the outcome, not the obstacle. Our ideal candidate must have a strong work ethic with a results/performance driven track record in a fast paced, changing, and challenging environment. Key Skills & Abilities is adaptable, works with a sense of urgency and high level of initiative and demonstrates a commitment to quality with attention to detail., • Continual Improvement - We encourage and drive innovation. Our ideal candidate must be naturally curious, passionate, and never satisfied with the status quo. Key Skills & Abilities is innovative and has a problem-solving mindset that provides and implements CI ideas. EEO/AA/F/M/VET/DISABLED #zr

Job Description Alta E&I is an Engineering, Surveying, and Construction Materials Testing Consulting Company providing performance driven solutions throughout the asset life cycle, from concept to decommissioning. If your passion is collaborating with a fast-growing company, Alta E&I is the place for you! Alta E&I prides itself on providing professional development and career paths for all our team members from our interns to senior leadership! Be part of the limitless career growth and experience Alta E&I offers all employees. Summary A career as a Special Inspector at Alta E&I means you will be the day-to-day eyes and ears on job sites by providing inspections of various construction activities. Inspectors prepare reports documenting both structural special inspection and construction materials testing in accordance with building code requirements and project specific construction documents. Inspections may require expertise in one or more of the following areas: soils, reinforced concrete and/or masonry, structural steel, fireproofing, etc. Inspectors work under the supervision and direction of a Professional Engineer and/or Project Manager, although work activities are generally performed unsupervised (i.e. employee is in the field as the Company's Representative). Essential Roles and Responsibilities: • Performs testing, observation, and inspection as directed in accordance with training and the specified procedures., • Reads and interprets construction drawings and specifications., • Drafts inspection reports for review by senior inspector and/or Project Managers, providing clear documentation of findings and results., • Performs basic analysis of data to verify accuracy before communication and submittal to the Project Manager., • Communicates information to Project Manager and other personnel as directed by the Project Manager., • Strictly adheres to OSHA and company safety guidelines and policies. Able to successfully complete internal safety certifications. Follows safety rules and practices and other safety requirements for all projects., • Performs pre-task planning prior to executing work. Reports any safety issues or concerns to management., • Responsible for maintaining quality standards on all projects, • Manages Personal field equipment., • Demonstrates ability to obtain and keep in good standing professional certifications such as:, • ICC certification (Reinforced Concrete, Spray-applied Fireproofing, Structural Masonry, Prestressed/Post-Tensioned Concrete, Structural Steel – Bolting, and/or Structural Steel – Welding)., • American Welding Society (AWS) Certified Welding Inspector (CWI), • Post Tension Inspector Level 1 or 2 (PTI), • Travel is primarily local during the business day, although some out-of-the-area and overnight travel may be needed as available. Required Skills/Abilities: • Strong written, verbal, and non-verbal communication skills, • Ability to work independently or as part of a team, • Strong computer skills, • Expertise in reading and understanding structural plans, • Experience with sampling and testing of construction materials and structural special inspections, • Physically fit and able to stand, walk, or sit for extended periods of time, • Attention to detail, • Professionalism Education, Licenses and Experience: • A minimum of 2-4 years’ experience as an Engineering Technician or other applicable experience. Candidates with 5+ years of experience may be considered for a senior level position, • High School Diploma or GED required., • Valid driver’s license with a clean Motor Vehicle Record (MVR), • Previous experience with certifications pertaining to: Arizona Technical Testing Institute (ATTI), American Concrete Institute (ACI), Radiation Safety and Nuclear Density Gauge operation certification Work Environment: • Indoors, outdoors, extreme weather conditions, including heat, cold, outdoor, sun exposure, • Frequently work on elevated surfaces and/or confined spaces Physical Requirements: • Capacity to work on your feet for extended periods standing and walking up to 9 hours a day, • Frequently lift, carry, push, pull or otherwise move objects weighing no less than 40 lbs., • Walk, stand, crouch, or run on narrow, slippery, or erratically moving surfaces, • Full use of senses to assist in observation and awareness including visual acuity and hand and finger dexterity to operate equipment, read technical information, and/or use a keyboard; ability to speak and hear over environmental and equipment noise Benefits: • Competitive compensation based on experience and current certifications, • A company gas card, • A company provided work vehicle or vehicle reimbursement plan, • Cell Phone reimbursement plan, • All certification costs required for employment, • A road to leadership through personal development and mentorship, • Based on eligibility, role and job status, we offer many other programs including medical, dental, vision, life insurance, 401(k) plan with matching, and paid time off and holidays About Alta Alta Arizona is a leading Engineering Consulting Firm providing professional services for Geotechnical Engineering, Surveying, Material Testing, Civil Engineering and Structural Inspection in the Southwestern United States. Alta’s engineering staff has project experience involving residential, commercial, government, institutional and industrial projects. We are a full-service company with a unique offering (Survey Mapping, Geotechnical Design, Civil Design, Construction Staking, Construction Material Testing, and Special Inspection Services) with Arizona offices in Tempe, Florence, Tucson, and Sierra Vista with a staff that includes registered land surveyors, certified material technicians & inspectors, and licensed professional engineers. Alta Arizona maintains a resource (formerly AMRL/CCRL) accredited lab and holds the United States Army Corps of Engineers Certificate, which allows Alta to complete complex and rewarding projects throughout the Southwest. Alta’s core value is SAFETY, without it, none of the information provided above is relevant. To learn more and apply on-line visit our website at The Employer retains the right to change or assign other duties to this position. All candidates receiving an offer of employment must successfully complete a background check and any other tests that may be required in accordance with state law. Equal Opportunity Employer Statement: Alta E&I is an Equal Opportunity Employer that values and respects the importance of a diverse and inclusive workforce committed to leveraging diverse backgrounds, perspective and experiences that create opportunities for our colleagues and our business. It is the policy of the company to recruit, hire, train and promote persons in all job titles without regard to protected category.

Ardor Health Solutions is seeking a travel Physical Therapist for a travel job in Tucson, Arizona. Job Description & Requirements • Specialty: Physical Therapist, • Discipline: Therapy, • Start Date: 11/03/2025, • Duration: 26 weeks, • 40 hours per week, • Shift: 8 hours, days, • Employment Type: Travel \n\t • Location: Tucson, AZ\n\t, • Setting: OUT PATIENT\n\t\t, • Employment Type: Traveler\t\n Ardor Health Solutions is looking for a Physical Therapist to join our travel team in a OUT PATIENT setting, in Tucson, AZ! This is a full time travel contract position. \n\t\t\t\t Requirements include, but are not limited to: \n\t\t\t\t \n\t\t\t\t • Active AZ. OUT PATIENT license \n\t\t\t\t, • 2+ years of Physical Therapist experience \n\t\t\t\t, • Major Medical \n\t\t\t\t, • Dental/Vision Insurance \n\t\t\t\t, • Pet Insurance \n\t\t\t\t, • Life Insurance with extensive family health options \n\t\t\t\t, • License Reimbursements and processing assistance with our internal licensing department \n\t\t\t\t, • $500 referral bonus Ardor Health Solutions is a Fortune Ranked, award-winning, expanding company that has also recently been ranked the 20th Largest Allied Staffing Firm in the Nation by Staffing Industry Analysts (SIA) and by Fortune`s Great Places to Work Surveys several years in a row. For more information or to be considered, please apply now. \n\n\n\t \n\n\n\nOur Awesome Benefits include:\n\n • Weekly Pay.\n, • Major Medical/Dental and Vision/Pet Insurance on Day 1.\n, • Option to enroll in our FREE Medical Coverage plan for you and your family.\n, • Life Insurance with extensive family health options.\n, • Immediately start accruing Paid Time off as a part of our Shift Gift Program.\n, • Earn an Ardor Appreciation Bonus for EVERY assignment/extension simply for working your contracted hours!\n, • Our Ardor Ambassador Referral Program allows you to make up to 2,000.00 per clinician you refer.\n, • Dedicated Clinical Support on staff – You are never alone on assignment.\n, • License Reimbursements and processing assistance with our internal licensing department.\n, • 24-hour emergency access to our offices.\n\n \n \n \n About Ardor Health Solutions:\n Ardor Health is a Family owned and operated Nursing and Allied staffing agency that has been around since 2001. For over 20 years now our Mission and Vision have been simple – Exceptionalism and Empowerment. We place exceptional clinicians in positions to provide exceptional care. We believe in Empowering our clinicians. You chose your path and one of our Ardor Advocates will empower you on your journey. We do not employ recruiters. We employ advocates. We believe in Pay Package Transparency. You chose your assignment – We are along for ride with you! From Free Insurance options and appreciation end bonuses to immediate accrual of PTO in the form of Shift Gifts, we offer some of the best benefits in the travel staffing industry. We genuinely care about the people we work with. We’re not filling quotas – we’re here to make intimate connections and have your back! Absolutely nothing we do is outsourced. Every function, process, and question you ask is handled by an Ardor Advocate who can greet you with a smile.\n For more information or to be \n COVID-19 vaccination and testing requirements vary by facility. Ardor\n Health adheres to the guidelines and requirements of each facility, as\n well as all applicable federal, state, and local laws.\n Ardor Health Job ID #784351. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Therapy Physical Therapist 5x8 Days About Ardor Health Solutions Ardor Health Solutions formed in 2001 and remains a privately held medical staffing business owned and operated by the same family. Over the years we have expanded our staffing and recruiting capabilities to include therapy services, nursing services, and all allied services. If you would like the personal service that comes with a staff of recruiters that have an average tenure with the company between 5 and 15 years, and the knowledge of our client services representatives with similar experience, there is no need to look any further. At Ardor Health Solutions you can expect better than average pay packages, extraordinary benefits, and the peace of mind that you will not be forgotten once you start your assignment. Perhaps that is why so many of our caregivers have completed more than a dozen different assignments with us over our long history. Ardor Health is pleased to offer a free medical insurance plan in addition to major medical plans. Please contact a recruiter for more details on the free medical plan and/or any other general inquiries. One final fact about Ardor Health Solutions. We have been paying our caregivers weekly since 2001, and we have never, ever, missed a payroll. If you are currently on an assignment with us, thank you. If you have traveled with us before, we would like to welcome you back. If you have never traveled with us, give us a try. You will not be disappointed. Benefits • Weekly pay, • Holiday Pay, • Pet insurance, • Referral bonus, • Employee assistance programs, • Medical benefits, • Dental benefits, • Vision benefits, • Benefits start day 1, • License and certification reimbursement, • Life insurance, • Discount program

Primary City/State: Tucson, Arizona Department Name: Work Shift: Varied Job Category: Lab Come do great work on behalf of better health! We in need of several Histo Technologists to work at our Tucson lab providing excellent diagnostic care for our community. POSITION SUMMARY This is position is responsible for the receipt of biological specimens into the department, preparation of samples for analytical testing, and performing waived testing. This position reports to department supervisor, and may take direction from higher level technical personnel. This position assists the coordinator and supervisor in the functional operation of the histology section; insuring the continuity of daily workflow and prioritization of work, training of new employees as well as the maintenance and reporting of quality control and quality assurance systems and procedure manuals, solving technical problems, and research and development activities. This position is also responsible for performing all essential functions as defined by the department. In addition, performs waived and moderately complex tests as defined by CLIA '88 in an accurate and timely manner. This position may perform highly complex testing as defined by CLIA '88 under general supervision. Also, under general supervision, performs as a grossing processor taking direction from a Certified Pathologist Assistant. Receives, examines and processes Pathology specimens. In the absence of the supervisor or coordinator, this position provides overview support for the Anatomic pathology section. Performs all functions of AP Laboratory Technician. Also, may train employees on basic entry level tasks, performs QC/QA duties and serves as a resource. This is an evening/night shift position. MINIMUM QUALIFICATIONS • Requires a Bachelor's degree with Anatomic Pathology departmental-specific certification documentation within 6 months of hire date. OR associates degree with 1 year of grossing experience in clinical laboratory., • Must be willing to perform/cross train in all areas of the Anatomic Pathology section and have demonstrated competency in all aspects of work., • 6 months of grossing experience in clinical laboratory EEO Statement: EEO/Disabled/Veterans Our organization supports a drug-free work environment. Privacy Policy: Privacy Policy

Primary City/State: Tucson, Arizona Department Name: Microbiology-BUMCT Work Shift: Evening Job Category: Lab Join one of Arizona's leading diagnostic labs at Sonora Quest, where your work directly supports life-saving medical testing and patient care. Whether you're beginning your lab career or bringing experience to the table, this role offers hands-on impact and career growth in a high-demand healthcare setting. Come do great work on behalf of better health! POSITION SUMMARY This position assists technical lab staff and may be responsible for the collection, receipt, and processing of biological specimens into the department, preparation of samples for analytical testing, and may perform waived and/or limited moderate complexity testing if CLIA minimum requirements are met or as approved by the CLIA Medical Director. This position reports to department leadership and takes direction from higher-level technical personnel. Performs all functions according to established policies, procedures, regulatory and accreditation requirements, as well as applicable professional standards. PHYSICAL DEMANDS/ENVIRONMENT FACTORS Able to stand, walk, bend, swat, reach and stretch frequently. Use material handling equipment to push and/or pull up to 75 pounds and required to lift, push and/or pull up to 25 pounds. Requires manual dexterity. Must use standard precautions due to threat of exposure to blood and body fluids, chemical, electrical and biological hazards. Ability to distinguish colors and to take direction and assimilate instructions quickly. Requires use of computer, printers, copiers, telephone, fax and department specific equipment. KNOWLEDGE, SKILLS AND ABILITIES • Must exhibit personal maturity and responsibility., • Excellent reading, writing and math abilities., • Communicates effectively in oral and written formats sufficient to demonstrate comprehension., • Ability to perform detailed work; work with frequent interruptions, multi-task, problem solve and memorization., • Ability to take direction and assimilate instructions quickly., • Detail oriented and exceptional organizational skills., • Basic computer skills., • Must exhibit skills in exceptional customer service, good performance review and passing on-site competency evaluation and /or assessment as defined by the department. MINIMUM QUALIFICATIONS • High School Diploma or equivalent and must be 18 years or older if performing phlebotomy., • Progression through career ladder II-IV is subject to completion of career ladder requirements., • Position may require DHS Fingerprinting Certification or the ability to obtain fingerprint certification., • Dependent on department/location, candidate must possess a valid state driver's license in the state of employment and be eligible for coverage under the company auto insurance policy., • Phlebotomy/CLA certification as defined by state regulations. PREFERRED QUALIFICATIONS • Previous clinical laboratory experience., • Successful completion of a laboratory assistant program., • Basic knowledge of specimen requirements and handling., • Knowledge of medical terminology., • Additional related education and/or experience. EEO Statement: EEO/Disabled/Veterans Our organization supports a drug-free work environment. Privacy Policy: Privacy Policy

Job DescriptionDescription: This is a full time role providing Southern AZ clinic support (Tucson, Safford, Sierra Vista and Yuma). Varying 8 hour shifts Monday-Saturday between 4AM-4PM Community Medical Services (CMS) is urgently hiring a Nurse to administer medication to patients recovering from addictions to opioids and other illicit substances. In your role as a dosing nurse, you’ll work under the supervision of the Nursing Manager and the Director of Medical and Nursing Operations to conduct required testing, maintain the medication inventory, audit records, and assist medical providers in providing a safe place for anyone looking to start their recovery journey with us. As part of our mission to help individuals recover from substance use disorders, you’ll thrive in a supportive, engaging, and fulfilling work environment where your contributions are valued. Along the way, we’ll invest in your well-being through a benefits package that includes: • Subsidized medical, dental, and vision insurance, • Health savings account, • Short and long-term disability insurance, • Life insurance, • Paid sick, vacation, and holiday time, • 401K retirement plan with match, • Tuition and CME reimbursement up to 100%, • Employee assistance program to support your mental health and wellness, • Is excited to work in an outpatient setting, much like a doctor’s office., • Enjoys a consistent schedule., • Administer medications as ordered/prescribed by a CMS medical provider, • Monitor behavioral patterns, medical symptoms, and physical symptoms related to dosage, as well as other symptoms related to drug use and mental health concerns, • Obtain vital signs, blood specimens, and urine samples, • Process point-of-care urine drug screens per company policy, • Prepare take-home medication (n/a in Montana), • Monitor medication administration closely to prevent diversion, • Report diversion to proper internal authorities, • Maintain accurate client records in company’s EHR system, • Document medication errors and respond to adverse medical reactions per company policy, • Arrange temporary incoming and outgoing courtesy dosing clients, • Deliver medications to external facilities, • Order necessary dosing room and nursing-related supplies, • Maintain accurate medication inventory records, • Adhere to all federal, state, local, and accrediting body regulations, • Administer CPR if necessaryRequirements:, • Licensed LPN or RN in state of employment, • CPR certification required, • Ability to travel to assigned CMS sites, • Experience in the field of substance use disorders preferred, but not required, • Knowledge of the signs of intoxication and opioid withdrawal symptoms, • Demonstrates accuracy in medication administration and ability to maintain accurate client records, • Must have reliable transportation #NUR About Community Medical Services Community Medical Services (CMS) is a CARF-accredited addiction treatment program providing services in the form of outpatient medication-assisted treatment and one-on-one and group counseling to those seeking help with their opioid use disorder. Headquartered in Arizona with more than 70 treatment clinics in 14 states, CMS is dedicated to meeting the challenges presented by the growing opioid epidemic in communities where treatment is lacking. Our Commitment We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, sex, disability status, sexual orientation, gender identity, age, protected veteran status or any other characteristic protected by law. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Other Conditions Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Tenet-AZ Region is seeking a Ultrasound Technologist Senior for a job in Tucson, Arizona. Job Description & Requirements • Specialty: Ultrasound Technologist, • Discipline: Allied Health Professional, • Duration: Ongoing, • 40 hours per week, • Shift: 8 hours Up to $10k SOB based on Eligibility Welcome to Carondelet Health Network, where making a real difference in people's lives is at the heart of everything we do. Beyond just medical treatments, we believe in the power of genuine connections and heartfelt compassion. It's what sets us apart and makes us truly special. \n\n When you join our team, you're not just stepping into a job – you're becoming part of a community that uplifts and supports each other every day. We know that healthcare requires a unique blend of talent and dedication, and we are fully committed to providing an environment that enriches and rewards your journey. \n\n\n Picture yourself among the brightest healthcare professionals, all united by a common purpose: caring for our community with unwavering commitment. At Carondelet, you won't just find colleagues; you'll find awe-inspiring teammates who share your passion for making a meaningful impact. \n\n\n If you're ready to go above and beyond, to embrace the energy and camaraderie that Carondelet Health System offers, then join us on this incredible adventure. Together, we'll create a healthier, happier world – one patient at a time. Let your career find its purpose here at Carondelet. \n\n\n Senior Ultrasound Tech FT Days Position Summary \n\n\n Working Lead, coordinates scheduling and efforts of the Ultrasound Techs. Mentors and trains staff. Position coordinates with other departments the day-to-day activity for routine, portable and invasive patient procedures. Works with the Manager of Radiology, the Radiologists, and other personnel to supervise and perform technical procedures in General and Vascular Ultrasound. \n\n\n Responsibilities: \n Coordinates the scheduling and efforts of the Ultrasound Technologists. Mentors new and less experienced staff and students. \n Performs general ultrasound procedures for patients of all age groups served. Duties include: general operating procedures, start-up procedures, calibration of equipment, troubleshooting, QC, preventative maintenance, malfunctioning equipment and problem solving. Assists in evaluation of new procedures, reagents and equipment. Ensures correct exam is performed with the right patient, at the right time, verifies patient identification with proper film. Explains procedure and assesses the patient before testing occurs. Follows protocol for filing and copying of films. \n Performs billing and charging with hospital computer systems. \n Identifies, proposes solutions and assists in implementation of ideas for improvement in patient care and departmental / hospital operations. Identifies opportunities and implements strategies to decrease waste in supplies and equipment. \n Maintains inter and intra departmental communication via phone, fax, computer, etc. Maintains communication with radiologists. Identify anatomy and recognize types of disease processes by interpretation of measurements and by visual inspection of images. Calculates various measurements by using established formulas or computational capabilities of the individual piece of equipment. \n Prioritizes workload. Completes work in a timely manner. Maintains a clean and orderly work environment. Shares responsibility for organizing supplies, tracking, stocking and storing equipment. \n Participates in the peer review and orientation process for new team members. Coordinates and participates in completion of the orientation competency checklist for new hires and annual competencies for all employees. Manages employee performance by participating in evaluation process and coaching. \n Refers problems/issues to the appropriate resources when unable to independently manage the situation. \n Utilizes personal protective equipment to protect from exposure to chemical, radiation and infectious hazards. \n Uses policy and procedure manuals and other reference material to ensure proper course of action. Participates in departmental meetings by providing input and reading posted communication \n Position is required to work on-call (stand-by) shifts and return to work as outlined in the department policy. \n Other related job tasks or responsibilities as assigned. \n\n\n Special Skills: Excellent verbal communication skills necessary to understand oral and written instructions stated in radiological and medical terms and to exchange information with patients and staff. Problem solving skills. \n\n\n \n\n\n \n\n\n SENIOR ULTRASOUND TECH FT DAYS CANDIDATE WILL POSSESS THE FOLLOWING EDUCATION, LICENSE/CERTIFICATIONS, AND EXPERIENCE \n\n\n LICENSURE/CERTIFICATION/REGISTRATION: \n\n\n Required: American Registry of Diagnostic Medical Sonographers (ARDMS) or CCI Certified. Basic Life Support. \n\n\n Preferred: RT(R), RDMS (General and OB), RVT \n\n\n Candidates without the required certification have up to one (1) year from date of hire to obtain \n\n\n EDUCATION: \n\n\n Required: Completion of formal ultrasound technology training which meets requirements for certification with the American Registry of Diagnostic Medical Sonographers. \n\n\n Preferred: Associates degree \n\n\n WORK EXPERIENCE: \n\n\n Required: Three years UItrasound and Vascular experience with demonstrated leadership skills \n\n\n Preferred: Five years Ultrasound and Vascular hospital experience with demonstrated leadership skills \n\n\n #LI-SB3 \n Tenet AZ Job ID #2503024242-0. Posted job title: Senior Ultrasound Technologist FT Days

Job Description Quality Inspector – Aviation Excellence Starts With You Location: Tucson, AZ | Pay: 38–47/hour Your Expertise. Our Mission. Safer Skies. Take on a pivotal role where your skills and attention to detail directly impact the safety, compliance, and performance of modern aircraft. Our aerospace client in Tucson, AZ—recognized for excellence in manufacturing, repair, and testing—seeks a Quality Inspector with a passion for precision and a commitment to aviation standards. This is more than a job—it's your opportunity to help define the standard of safety in the skies. Key Responsibilities As a Quality Inspector, you are a trusted authority in ensuring every aircraft component, part, and system meets the highest airworthiness standards. Your day-to-day responsibilities include: * Ensuring all maintenance, repairs, and alterations are fully compliant with FAA, FAR, and other regulatory bodies * Conducting precise inspections of aircraft, engines, and parts using specialized tools and methods * Overseeing and validating aircraft documentation, from arrival records to completed work packages * Performing aircraft weighing procedures and walk-around inspections prior to return to service * Coordinating inspection activities using computer-based maintenance tracking systems (CAMPS, AVTRAC, etc.) * Reviewing and verifying new, repaired, or rebuilt parts for conformity and quality * Researching and interpreting technical data, engineering orders, and maintenance documentation * Participating in the return-to-service process to confirm all airworthiness requirements are met * Communicating inspection findings clearly and providing detailed reports to both internal teams and external customers * Supporting continuous improvement by mentoring team members and sharing technical knowledge What It Takes to Thrive We’re looking for professionals who are not only technically skilled, but also proactive problem-solvers and collaborative team members. Minimum Requirements: * FAA Airframe & Powerplant (A&P) Certification * 3+ years of aircraft maintenance experience or substantiated equivalent * 2+ years working with corporate or commercial jets * Basic set of hand tools with proven inventory control * Proficient in interpreting and applying domestic and international regulatory documentation (FAA Regs, CAA, ADs, SBs, TCDS, etc.) * Skilled in the use of inspection tools and test equipment * Strong understanding of return-to-service procedures * Excellent communication and documentation skills Preferred: * Leadership qualities with the ability to train, coach, and mentor team members in inspection practices * Experience working in fast-paced MRO or manufacturing environments Ready to Take Flight? If you're a detail-oriented aviation professional ready to lead from the inspection line, we want to hear from you. Apply today and join a team that’s setting the bar for excellence in aerospace safety. Your precision keeps aircraft flying. Your next career move starts here! This position may be eligible for up to a 5,000.00 sign-on bonus! (Terms and Conditions Apply) Pay Details: 38.00 to 47.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Company DescriptionSince 1977, the PDS family of companies has become among the largest and most respected staffing companies in the United States. A vital part of the PDS family, PDS Tech Commercial connects highly skilled employees with Fortune 500 clients’ needs for project support such as contingent labor, statement of work/offload engineering projects, and permanent placements. PDS Tech Commercial has staffing partnerships with leading organizations based in the United States and globally. We hire jobseekers daily for openings across skill categories, including Engineering, IT, Business Professional, Administrative, Accounting/Finance, Skilled Trades and Industrial. We offer eligible associates an ala carte benefits package, that can include direct deposit, free career counseling, 401(k), select paid holidays, short-term disability insurance, skills training, employee referral bonuses, and an affordable medical coverage plan. Now part of The Adecco Group, our shared synergies combined with the investment Adecco continues to make in PDS offers significant advantages to both clients and associates alike. We share Adecco’s dedication to unlocking our Associates’ potential by unleashing the Future@Work and to the importance of human and labor rights, diversity and inclusion, environmental responsibility, and more.Since 1977, the PDS family of companies has become among the largest and most respected staffing companies in the United States. A vital part of the PDS family, PDS Tech Commercial connects highly skilled employees with Fortune 500 clients’ needs for project support such as contingent labor, statement of work/offload engineering projects, and permanent placements.\r\n\r\nPDS Tech Commercial has staffing partnerships with leading organizations based in the United States and globally. We hire jobseekers daily for openings across skill categories, including Engineering, IT, Business Professional, Administrative, Accounting/Finance, Skilled Trades and Industrial.\r\n\r\nWe offer eligible associates an ala carte benefits package, that can include direct deposit, free career counseling, 401(k), select paid holidays, short-term disability insurance, skills training, employee referral bonuses, and an affordable medical coverage plan.\r\n\r\nNow part of The Adecco Group, our shared synergies combined with the investment Adecco continues to make in PDS offers significant advantages to both clients and associates alike. We share Adecco’s dedication to unlocking our Associates’ potential by unleashing the Future@Work and to the importance of human and labor rights, diversity and inclusion, environmental responsibility, and more.

Job DescriptionBenefits: • Competitive salary, • Opportunity for advancement, • Comprehensive training program, • Raises at regular intervals and milestones, • Performance bonuses, • Career Advancement Opportunities Responsibilities • Maintain the cleanliness and safety of the building, • Adhere to company systems and training, • Submit to regular knowledge testing, • Vacuum carpets, mop floors, scrub restrooms, dust furniture, and empty trash cans daily, • Clean windows, spot clean carpets, and supply restrooms on a regular basis, • Wipe up spills and other hazards with sponges and squeegees, • Secure the building by locking doors once cleaning is complete, • Write reports of areas cleaned and notify the manager of major issuesQualifications, • Educational requirements include a high school diploma or equivalent, • Entry level No experience necessary, • Drivers license or reliable transportation to and from the worksite, • Excellent stamina and physical health, • Must be a hard worker with high attention to detail and have a strong work ethic

Job Description General Summary An HAVC Technician to perform preventive maintenance, repairs, and installation of commercial and residential HVAC systems. work to be performed throughout Southern Arizona at US Border Patrol Stations. 4-10s. No on-call. DOE $23-28, plus $4.41 H&W. Must pass the Department of Homeland Security Background Investigation Essential Duties and Responsibilities • Performing routine maintenance, • Troubleshooting, • Repair, • Removal and Installation, • Communicate equipment deficiency, • Must pass the Department of Homeland Security Background Investigation, • Ability to perform most tasks of the craft without supervision, • Must be able to read and understand blueprints, construction drawings, schematics and diagrams, • Ability to drive safe, • Trained in all types of sizes of air condition refrigeration and evaporative cooling equipment, • Enviromental Protection Agency (EPA) certification to purchase and handle ozone depleting chemical as outlined in federal and state regulations., • Work in a team, • Must be able lift 50 lbs., squat, bend, stoop and knell for short periods, climb a ladder, stand for long periods of time, constant arm extensions., • Occasional exposure to elements such as heat, cold, noise, dust, dirt, chemicals, but none to the point of being disagreeable. May involve minor safety hazards where likely result would be cuts, bruises, etc. This job description is subject to change by the employer as the needs of the employer and requirements of the job change. We maintain a drug-free workplace and perform pre-employment substance abuse testing. J&J Worldwide Services CBRE Government and Defense Business is thrilled at the opportunity for you to apply to one of our roles. The base salary range for this position is $23.94 per hour. This position may also be eligible for a wide range of competitive benefits that can include but not limited to: medical, well-being, financial planning and short-term incentives benefits. Due to compliance requirements imposed by a federal contract, this position may be filled by U.S. Persons only. U.S. Persons includes: U.S. citizens, U.S. nationals, lawful permanent residents, individuals granted refugee status in the U.S., and individuals granted asylum in the U.S. This description is not intended to be an “all inclusive” list of the accountabilities of the job described. Rather, it describes the general nature of the job. In addition, some aspects of this job may change over time, according to business needs, and these changes may not be recorded immediately. Requirements stated represent the minimum levels of knowledge, skills and/or abilities to qualify and satisfactorily perform this job. THIS DOCUMENT SHOULD NOT BE CONSTRUED AS CREATING A CONTRACT OF EMPLOYMENT BETWEEN J&J WORLDWIDE SERVICES AND ANY OF ITS EMPLOYEES OR OTHERWISE ALTERING AN EMPLOYEE’S AT WILL EMPLOYMENT RELATIONSHIP WITH J&J WORLDWIDE SERVICES.

Job Description Join the Sargent Legacy in Securing Our Future With continual growth comes opportunity and Sargent has an immediate opening for a Deburr/Machine Operator. Position Summary Sargent is seeking a motivated individual to join our growing team as a Deburr/Machine Operator. This role is integral to our machining operations, driving productivity, ensuring quality, and fostering continuous improvement. The successful candidate will collaborate with our team to exceed organizational goals and support operational excellence. Responsibilities • Adhere to and promote safety standards for all equipment, demonstrating safe behaviors at all times., • Maintain a clean, organized, and safe work environment., • Perform routine maintenance checks on equipment as required., • Ensure compliance with company quality standards in all tasks., • Execute operations as outlined in specifications, blueprints, and documented procedures., • Collaborate effectively within a team-oriented environment., • Monitor processes and respond promptly to non-conformances., • Use hand tools, power tools, and abrasives to deburr and finish machined parts to required specifications (training available)., • Inspect parts for burrs, sharp edges, and surface imperfections., • Interpret work orders, blueprints, and technical drawings to understand finishing requirements (training provided if needed)., • Assist machinists and quality control teams in ensuring parts meet customer and company standards., • Operate pre-setup machines or saw materials as needed when not deburring., • High school diploma or GED., • Strong mathematical skills., • Mechanically inclined with a basic mechanical aptitude., • Ability to read and write in English., • Availability to work overtime as required., • Proven ability to follow work instructions., • Strong attention to detail and commitment to producing high-quality work., • No prior deburring experience required; on-the-job training provided., • Basic familiarity with hand tools and mechanical processes., • Ability to read and measure complex parts using various measuring equipment., • Physical capability to:, • Bend, squat, sit, stand, walk, and handle objects as needed., • Push, pull, and reach above shoulder level., • Carry/lift to 40 pounds and rotate handled items., • Stand on feet for the entire shift., • Manual dexterity for repetitive, methodical tasks., • Must be a U.S. Citizen., • Manufacturing experience preferred., • Machining related experience or course work is a plus. RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components, and essential systems for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing, and manufacturing capabilities for the diversified industrial, aerospace and defense markets. RBC currently has 56 facilities, of which 37 are manufacturing facilities in ten countries and the market capitalization is approximately $6.2 billion. In 2015, RBC acquired Sargent Aerospace and Defense. Founded in 1920, Sargent Aerospace & Defense leverages 100 years of expertise as a premier global supplier of precision engineered customized components that directly contributes to the safe operation of countless commercial and military aircraft, rotorcraft, submarines, and land-based vehicles. At Sargent, our mission is to secure our future by making the challenging a reality. We achieve this by delivering high quality products and services that meet customer requirements and exceed customer expectations through employee development, customer focus and continual improvement. Sargent’s continuing investment in people, assets, technology, and process quality ensures excellence and is integral to the company’s commitment to customers and their end-users. As we grow, we will continue to root our culture through our core values of Integrity, Respects & Values People, Customer Focus, Teamwork, Results Focus and Continual Improvement. Company Benefits Include: • Competitive Compensation, • Bonus platforms, • Holidays/Vacation/Sick Time, • 401k Savings & Investment Plan, • Tuition Reimbursement, • Medical/Dental/Vision Plans, • HSA/FSA, • Life & Disability Insurance, • Accident/Hospital/Critical Care Plans, • Pet Insurance, • Gym & Rideshare Incentives, • Legal Insurance/Identity Theft, • Flexible Schedules, • 3 & 4-day work week, • Integrity - We do the right thing the right way. Our ideal candidate is ethical, honest in all interactions, delivers good news and bad, and follows through on commitments. Key Skills & Abilities is fair, credible, confidential, fiscally responsible, and accountable for decisions and actions., • Respects and Values People - We encourage and bring out the potential of others. Our ideal candidate embraces diversity, recognizes, and supports the accomplishments, talents, and development of others. Key Skills & Abilities is committed to the building of strong relationships and creates an environment of trust and mutual respect., • Customer Focus - We act with excellence in each and every interaction. Our ideal candidate builds strong internal/external customer relationships and goes above and beyond to deliver high quality products and services on time, every time. Key Skills & Abilities is responsive with strong customer service skills, product, and job knowledge to provide excellent customer satisfaction., • Teamwork - We are better together. Our ideal candidate is inclusive, engaged and collaborative, sharing information, ideas, and experiences to accomplish goals, improve decision making and leverage capabilities. Key Skills & Abilities is a dependable team player, demonstrated through attendance and punctuality, works well with others, and has strong communication skills (both oral & written) to keep all stakeholders informed., • Results Focus - We focus on the outcome, not the obstacle. Our ideal candidate must have a strong work ethic with a results/performance driven track record in a fast paced, changing, and challenging environment. Key Skills & Abilities is adaptable, works with a sense of urgency and high level of initiative and demonstrates a commitment to quality with attention to detail., • Continual Improvement - We encourage and drive innovation. Our ideal candidate must be naturally curious, passionate, and never satisfied with the status quo. Key Skills & Abilities is innovative and has a problem-solving mindset that provides and implements CI ideas. EEO/AA/F/M/VET/DISABLED #zr

Job Description Make an Impact as a Physical Therapist (PT) at BAYADA Home Health Care BAYADA Home Health Care is currently seeking a Physical Therapist (PT) to join our East Tucson Visits team. PT's work with clients in their home, craft treatment plans, and apply innovative techniques to help them reach their goals. You will be an integral member of a multi-disciplinary health care team that provides skilled nursing and rehabilitative care to clients, affording them the opportunity to remain at home. We believe our clients and their families deserve the highest quality home health care delivered with compassion, excellence, and reliability. Delivering this care is our highest priority and greatest joy. We want you to join us! How You'll Make an Impact: * Perform diagnostic tests and measurements, such as the mobility/range of joints, transfer status, stability, patterns and appearance of ambulation, strength and endurance, balance testing, and safety assessments * Develop and implement appropriate individualized care plans, including manual therapeutic exercises, gait training, balance, and other interventions * Implement integumentary protective interventions to prevent wound formation and promote wound repair utilizing evidence-based dressings and topical agents * Continually assess and revise the Physical Therapy - PT care plan * Educate and instruct clients, family members, or other client representatives, in rehabilitative care and activities necessary to promote the client's health, safety, and independent living. * Accurately document observations, interventions, and evaluations pertaining to patient care management and services provided, utilizing a state-of-the-art touch pad tablet Compensation & Schedule: * Competitive pay rates with a weekly pay schedule * Flexible scheduling Benefits You'll Love: * Health Insurance: Medical, dental, vision, prescription coverage, FSA and HSA options * Recognition & Rewards: Recognition and Therapy Hero programs; referral bonuses * Paid Time Off: PTO (paid time off) and paid holidays * Reimbursements: Mileage reimbursement or schedule-specific benefits * Life Insurance: Employer-paid life insurance * Wellness: Employee Assistance Program (EAP) Qualifications for a BAYADA Physical Therapist: * A current Physical Therapist - PT license in Arizona * Graduation from a program approved by the American Physical Therapy Association or the Committee on Allied Health Education and Accreditation of the American Medical Association, as indicated by school transcript or diploma * Solid computer skills; prior experience with electronic medical records (EMR) preferred Thrive in a Culture That Cares: We put your well-being first, fostering an inclusive and collaborative environment of belonging where you can achieve your goals. Don't just take our word for it: * Newsweek's Greatest Workplace for Overall, Women, Parents & Families, Diversity * Forbes Best Employers for Veterans Be part of a caring, professional team that is instrumental in providing the highest quality care while developing your career with an industry leader. Apply now for immediate consideration. As a BAYADA Physical Therapist you will be prepared to succeed. * Paid training from day one in the office, in the home, and online to make sure you feel confident * Clinical support whenever you need it around the clock BAYADA recognizes and rewards our PTs who set and maintain the highest standards of excellence. We can't wait to meet you! Locations We're Hiring: East Tucson Type: Full-Time, Part-Time, Per Diem As an accredited, regulated, certified, and licensed home health care provider, BAYADA complies with all state/local mandates. BAYADA is celebrating 50 years of compassion, excellence, and reliability. Learn more about our 50th anniversary celebration and how you can join in here. BAYADA Home Health Care, Inc., and its associated entities and joint venture partners, are Equal Opportunity Employers. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, age, disability, pregnancy or maternity, sexual orientation, gender identity, citizenship status, military status, or any other similarly protected status in accordance with federal, state and local laws. Hence, we strongly encourage applications from people with these identities or who are members of other marginalized communities.

Job Description about Climatec For over 40 years, Climatec has steadily invested in their people, technology, and services to be a trusted business partner for building solutions. As part of the Bosch Building Technologies Integrator Business in North America, Climatec is one of the leading providers of building technologies and energy solutions in the nation – delivering results for thousands of customers, every day. Climatec’s strategic business partners include the world’s leading suppliers of building automation, security, life safety, and energy efficiency technologies. about Bosch The Bosch Group is a privately held supplier of innovative technology and services with over 400,000 associates worldwide. Its unique private ownership structure was established to promote entrepreneurial freedom and long-term business focus. Bosch’s operations serve millions of customers across four business sectors: Mobility Solutions, Industrial Technology, Consumer Goods, and Energy and Building Technology. Level Descriptions: • Level 1 – Must be able to achieve many objectives of this position. Requires some amount of timely supervision to ensure the proper tasks are being accomplished and that communication is adequate, timely, in the correct manner (i.e. verbal, written, email, etc.). If in Special Systems, the individual had a good understanding of at least one type of system within this division as well as holds a low level NICET or other industry certification., • Level 2 - Consistently achieves all of the objectives of this position. This individual also provides mentoring and direct day-to-day supervision to level 1 positions. The individual, if working for the Special Systems division, has an ability to work on multiple Special Systems deliverables and has obtained mid-level NICET or other industry certifications., • Perform service and inspections based on NFPA 10, 12, 17, 17A, and 2001, • Identify, correct, and report violations or non-compliance issues relating to NFPA, OSHA, and local fire safety codes., • Perform basic troubleshooting and describe them to owners and service managers for repairs, • Conduct regular inspections and testing of commercial kitchen hood suppression systems to ensure proper function and compliance with regulatory requirements (including code-mandated semiannual checks)., • Complete detailed inspection, maintain accurate reporting, maintenance, and repair reports, documenting findings and actions taken., • Respond to emergency service requests, troubleshoot urgent issues, and restore fire suppression system functionality in high-pressure situations., • Monitor and assure progress and completion of all assigned tasks., • Complete time sheets, service work orders, and other paperwork required for this position in an accurate and timely manner., • Provide service support on existing installations ensuring systems continue to meet existing building codes., • Assist Sales team during estimating phase including potential product or system demonstrations., • May perform inspections from man lifts at elevations of 30 to 40 feet from ground level, as necessary Minimum Qualifications: • Minimum of high school diploma or GED., • 2+ years of related work experience in commercial kitchen hood inspection and service required., • Other technical experience such as military, on the job training programs, etc. may meet this requirement as determined by local management., • Experience and expertise including but not limited to:, • Working knowledge of the operational characteristics of fire extinguishers, kitchen hoods, and emergency/exit lights, • Knowledge of NFPA 10, 12, 17, 17A, and 2001, • Basic mechanical skills, including the ability to troubleshoot mechanical and electrical issues, • An understanding of computer operating systems including MS Office Suite of products., • Clear and concise ability to communicate verbally and in writing., • Ability to obtain all required certifications, • 3+ years of experience in fire suppression, pipe fitting, and other related fields and specialties., • 3+ years of experience inspecting and servicing commercial kitchen hoods., • 2+ years of experience in fire alarm installation, inspection, and service., • 2+ years of experience working in security and life safety systems or related., • An Advanced understanding of NFPA and other related fire and life safety codes., • Certifications with an advanced understanding such as NICET, CSA, and Backflow (Inspection and Repair), • Be able to lift and carry ladders, drawings, personal computers, material, etc., • Be able to lift up to 75lbs., • Be able to spend significant time standing and walking on construction sites., • Be able to climb several flights of stairs or ladders throughout a typical day on a construction site., • Maintain a satisfactory driving record which, per Climatec’s vehicle policy, allows the individual to drive a company vehicle., • Medical, • Dental, • Vision, • Flexible Spending Accounts, • 401K w/ company match, • Life/AD&D/LTD, • Paid Vacation/Sick/Holidays, • Employee Assistance Program Equal Employment Opportunity Statement This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. Equal Opportunity Employer, including disability / veterans. All your information will be kept confidential according to EEO guidelines. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Reasonable Accommodations If you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, you can reach out to our HR team for support at 602-944-3330 or email . Please note our HR representatives do not have visibility of application or interview status. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization unavailable.

Job Description General: Support customer flight operations by performing duties as an Instructor Pilot. Mission location will be disclosed at time of interview/hire. Responsibilities: • Lead operation of UAS in accordance with applicable regulatory flight approvals, • Follow and execute test plans and test cards, in conjunction with test engineering and mission operations, • Coordinates ground and flight operations including mission planning, execution, and debriefing; safe operation of the aircraft; aircrew resource management; and customer coordination., • Assist with non-routine experimental program, • Provides recommendations for manual updates, and flexible enough to adapt to sudden changes in mission tasking., • Provides advice and feedback on corrective actions., • Provides technical assistance and guidance to other technical personnel., • Work with engineering on functionality issues and procedure updates., • Communicate with engineering on product performance and functionality issues., • Assist the Technical support group with our customer needs for technical support., • Supports the operations and testing of UAS platforms Minimum Requirements: • 4-6 yrs of experience in this field, • HS Diploma/Associate's, • 1,000-1,500 hours flying experience, • FAA Class II Medical Certificate, >200 hours previous Instructor Ability to work extended hours and shift work Preferred Experience: • Piccolo Experience; Demonstrated experience flying inter-country missions; Payload and Gimbal Operating Experience; FAA Instrument Rating; FAA Commercial Pilot License, • Graduate from group 3 DOD UAS Course or FAA private pilot license w/instrument rating, • 300-500 hrs ULTRA or LEAP Flight Experience Competitive pay with full benefits package and paid time off

Job Description Certerra is a growing national provider of testing, inspection, and certification services that support innovation in new product development, quality assurance, for project delivery, and engineered solutions for asset management. We are passionate about contributing to the sustainable development of the communities we serve. We are a national firm with a global reach serving national and international clients from 30+ offices located in 10 states and are ranked on ENR’s Top 500 list alongside the nation’s top firms. With a 60-year history, Certerra has a passion for high-end services, constant innovation, and investment in the development of world-class laboratory facilities, and interactive management technologies. Each member of our staff is committed to service, innovation, and the success of our clients. This Opportunity: We have immediate full-time career opportunities for a Level II NDT/ CWI Technician in several of our offices. Certerra offers on-going training and the ability to gain valuable career experience and technical certifications. Job Duties • Test and inspect using NDT and or CWI procedures on construction job sites., • Prepare daily reports on observation and testing activities, • Review reports and test data for accuracy and completeness Job Requirements: Candidate must have a minimum qualification of Level II certifications: CWI Gamma Radiography Testing (RT) Magnetic Particle Testing (MT) Candidate must meet the following minimum requirements: Work related experience in utility and/or industrial construction Current State card or ASNT-IRRSP Documented education and on-the-job training Good communication and report writing skills Clean motor vehicle record Pass a pre-employment drug screen Complete a FBI fingerprint criminal background check or TWIC card Additional preference given for candidates with the following certifications: Certified Welding Inspector (AWS) Ultrasonic (SWUT / PAUT) Liquid Penetrant (PT) Physical Demands • Physical examination required to obtain medical clearance to work, • Ability to stoop, kneel and to routinely lift and carry 50 pounds, • Clean driving record and capable of being insured for driving company vehicles, • Able to work in variable outside conditions, including extreme heat or cold if need We are an Equal Opportunity Employer. This Company is dedicated to both the letter and the spirit of the equal opportunity employment laws. All applicants and all employees will be evaluated on the basis of their ability, competence, and performance of the essential functions of their positions. There will be no discrimination on the basis of race, sex, national origin, religion, age 40 and over, disability, sexual orientation, marital status, or any other classification which may be protected by federal, state, or local laws. In compliance with the Americans with Disabilities Act, we specifically offer equal opportunity for all employees or job applicants who may have a physical or mental disability. Such persons will be hired on the basis of their ability to perform the essential functions of the job in question. Likewise, their work will be evaluated on their performance of these essential functions. We will offer reasonable accommodation to individuals with disabilities, to the extent that Company resources allow without undue hardship. As part of our equal employment policy, there will be no wage differentials based on gender, between men and women employed in the same establishment, on jobs that require equal skill, effort, and responsibility, and which are performed under similar working conditions.

Job DescriptionEstablished in 1982, MBI Industrial Medicine, Inc. is an Arizona-based company that operates 31 full-service occupational healthcare facilities across Arizona, Colorado, California, and Nevada. MBI stands out for its unique focus solely on treating injured workers. Our facilities are staffed with dedicated medical professionals who are committed to our mission of delivering timely, compassionate care and implementing evidence-based practices to achieve industry-leading results. As a company on the move, we have plans for expansion, presenting exciting opportunities across all levels of our organization! If you are seeking a rewarding career, eager to collaborate with a team of dedicated healthcare providers, and desire for personal and professional growth in the medical field, MBI invites you to apply today! Work Schedule: Monday through Friday, 8:00 AM to 5:00 PM Summary: Will assist in the operations of a physical therapy clinic including patient care, functional abilities testing (“lifts”), administration, confidential medical record management, and office maintenance/cleaning. Responsibilities: • Patient care will include assessing vitals, supervising, and carrying out the plan of care set by the physical therapist and medical charting in accordance with the State Physical Therapy Assistant’s Practice Act and Statutes., • Lift/fit testing will include the objective and unbiased assessment of a person’s ability to safely complete pre-determined tasks with proper mechanics., • Administrative responsibilities will include patient and provider scheduling, copying, faxing, typing/computer use, and phone work., • Medical record management will include insuring confidentiality under HIPAA law, insurance authorizations, and filing., • Office maintenance and cleaning will include table surface disinfecting, laundry, exercise and modality equipment care, and supply inventory and stocking., • Perform other duties as assigned. Requirements: • Certificate from an accredited PTA program., • Current State PTA license in good standing., • Current CPR certification. Benefits: At MBI, our commitment to providing accessible and convenient care to individuals injured at work is a team effort. Every employee and role are essential and valued. Rewarding the dedication and commitment of our employees extends beyond a paycheck. In addition to competitive salaries, we offer to full-time Physical Therapy Assistants: • Group Medical, Dental, and Vision Insurance, • Life, Short-Term, and Long-Term Disability Insurance, • 401(K) with company match, • Generous Paid Time Off and Company Paid Holidays, • Medical Malpractice Coverage, • Colleague Referral Bonus Program Equal Opportunity Employer

Job Description This position will require access to ITAR and/or EAR controlled technical data, technology or source code, and requires that all individuals in this role be authorized to access such information. General Description: The Production Technician reports to the Production Supervisor within their area of assignment. The Production Technician is responsible for working on production projects that require a higher level of experience, assisting in the training of operators in the proper processing of product, and working with engineers in the transition of jobs from development to production. The Production Technician also performs the general work of a Production Operator. This position requires a safety and quality conscious person who is energetic and goal orientated. Personal contact with others outside of the department will typically involve interaction with technical and quality assurance personnel to give information on product related concerns. Strong communication skills are required. The work environment may involve the handling of hazardous chemicals. The ability to use a personal respirator is required. The physical demands of the position may involve standing for extended periods, as well as periodic lifting of items weighing up to 75 lbs. This classification applied to: Mill Room: mixing, calendaring, extruding. Hose Department: building, molding/swage/solder, k-46 bottle assembly and knitting. Special Projects: molding, bonding and lay-up of parts. Primary Responsibilities: • Achieve daily and job specific goals, • Establish lean manufacturing techniques in processes, • Train operators in the proper processing of product, • Practice safe and efficient work habits, • Provide support to engineering and product management in the development of new jobs, • Perform the general work of an Production Operator Education and Experience Requirements-External Candidate: • High School diploma or equivalent, • Minimum of three (3) years experience within a similar manufacturing environment, • Ability to interpret technical drawings in area of specialty, • Experience conducting process audits, • Experience in cause analysis and preparing corrective actions, • Must complete and pass testing requirements for position of specialty within the first ninety days of employment, • Ability to set up, operate and shut down equipment within area of specialty, • Lean manufacturing experience in previously held position(s), • Ability to complete production forms, such as product travelers, • Ability to accurately utilize measuring equipment, such as calipers, thickness gages, weigh scales, and tape measures, • Advance knowledge of quality requirements and in-process inspection techniques, • Basic computer skills preferred Education and Experience Requirements-Internal Candidate • High School diploma or equivalent, • Minimum of three (3) years employment at R. E. Darling- Preferred, • Ability to interpret technical drawings in area of specialty, • Experience conducting process audits (must have conducted six (6) process audits and reported findings), • Experience in cause analysis and preparing corrective actions (must have conducted one (1) cause analysis investigation and have prepared a corrective action relating to the cause analysis investigation), • Must complete and pass testing requirements for position of specialty, • Ability to set up, operate and shut down equipment within area of specialty, • Completion of internal Lean manufacturing training, • Ability to complete production forms, such as product travelers, • Ability to accurately utilize measuring equipment, such as calipers, thickness gages, weigh scales, and tape measures, • Advance knowledge of quality requirements and in-process inspection techniques, • Basic computer skills preferred Specific Tasks and Focus Areas: • Achieve daily and job specific goals, • Manage all jobs assigned from start-up to shut-down, • Utilize advanced knowledge of manufacturing methods used in area of specialty, • Utilize advanced knowledge of equipment operations within area of specialty, • Produce product per the manufacturing instructions and drawings, • Utilize knowledge of methods and materials to identify problems, • Proficient processing of requisitions (purchase and material), • Support immediate lead person/supervisor in decision making, • Produce quality parts by adhering to quality requirements and utilizing in-process inspection techniques for assigned jobs, • Maintain a good communication loop with engineering, quality, management, production operators and maintenance and provide support to each department as needed, • Fill in for Lead/Supervisor when necessary, • Establish lean manufacturing techniques in processes, • Set-up areas that maintain lean thinking, • Support the lean daily management system, • Conduct shift start up meetings, • Train operators in the proper processing of product, • Evaluate quality of product produced by the trainee for conformance, • Establish training criteria for manufacturing processes, • Lead by example and maintain a professional relationship with trainees, • Support Company mission statement and values, • Practice safe and efficient work habits, • Know safety procedures and safety equipment in work area, • Support a safe work environment and production practices, • Utilize proper PPE at all times, • Provide support to engineering and product management in the development of new jobs, • Support engineering in the development on new processes, • Support production in the troubleshooting of processing problems, • Generate engineering change requests, • Develop basic manufacturing processes, • Provide training to production operators, • Perform the general work of an operator “AA/EOE/W/M/Vet/Disable” R.E. Darling Co., Inc. is an equal opportunity employer. All qualified applicants will receive consideration of employment without regard to race, religion, color, national origin, gender, gender identity, sexual orientation, age, status as protected veteran, among other things, or status as qualified individual with disability.

Job Description Position Summary: Provide hands-on manufacturing support, utilizing experience with machining and hardware production. Support the full product life cycle from research and development to low volume production. Provide machine set-up and testing support as required. Must be a responsible self-starter and take pride in their work. Description of Duties: -Must have a full understanding of G-code. -Assist with the initial set-up of CNC mills/lathes. -Participate in fixture design and manufacturability reviews. -Assist with development and documentation of hardware manufacturing and verification processes. -Must be capable of fabricating and assembling prototype hardware in a fast-paced aerospace environment. -Provide back-up lab technician support as needed -Diagnose product problems and communicate symptoms to manufacturing engineers -Must be able to inspect personal 1st piece components using a variety of hand inspection equipment prior to submittal to quality assurance. -Frequently lifts, carries or otherwise moves and positions objects weighing up to 50 pounds when setting up equipment. -Typically bends, stoops and crouches on a regular basis to adjust settings on machinery. -Perform other duties as assigned. Knowledge, Skills, and Abilities: -Knowledge of precision machining -Ability to read engineering drawings including GD&T per ASME Y14.5 -Knowledgeable in a variety of metal working tools and equipment. -Knowledge of and experience with Foreign Object Debris (FOD) and working within a visibly clean environment. Can implement and work to "clean as you go" best practices. -Knowledge of and proficiency in the safe use of mechanical measuring instruments -Familiar with working under ISO9001 & AS9100 requirements -Skill in maintaining a clean, safe work environment. -Ability to operate various assembly equipment, such as pneumatic riveters, helical installation tools (both manual and electric), and various torque wrenches. -Skilled in verbal and written communications. -Ability to stand, stoop, and crouch over 50% of the time -Ability to lift objects weighing up to 50lbs -Ability to read standard work instructions -Ability to solve routine problems independently -Ability to demonstrate self-initiative in a fast-paced environment with minimal supervision -Ability to establish and maintain effective, positive work relationships; have creativity, flexibility, and resourcefulness. -Ability to support production requirements as required for the safe operation of standard manufacturing equipment and machinery Must have a high standard in personal workmanship Job Posted by ApplicantPro

Job DescriptionDescription: POSITION SUMMARY SOLON Corporation is a leading provider of large commercial and utility-scale photovoltaic (PV) and battery energy storage system (BESS) solutions in the Southwest United States. We are seeking an experienced solar Service Technician/Electrician to join our operations and maintenance (O&M) program. This role requires a proactive individual with experience in solar and electrical O&M, as well as excellent reporting and communication skills. The ideal candidate will be responsible for performing preventive and corrective maintenance, troubleshooting, warranty repairs, and operational diagnostics on commercial and utility-scale PV and BESS systems. This position will also occasionally be expected to support the electrical department with new construction projects, which may require in and out-of-state travel. RESPONSIBILITIES • Work with the Service Manager to administer a comprehensive solar O&M and service program, following standard operating procedures, safety protocols, and best practices., • Ensure all work is performed safely and in accordance with OSHA, NFPA and other applicable workplace safety standards., • Perform scheduled preventive and corrective maintenance on commercial solar PV and BESS systems in accordance with contractual and regulatory requirements., • Maintain accurate service records, documentation, logs and reports, ensuring compliance with NFPA-70B., • Diagnose and resolve system issues including inverter faults, nuisance trips, communication problems, and string-level failures., • Utilize common industry practices to analyze system health including megger testing, voltage readings, thermal imaging, IR curve tracing and performance testing., • Replace or repair system components such as inverters, disconnects, modules, fuses and wiring., • Collaborate with manufacturer and third-party engineering support when complex issues arise, creating case numbers and keeping proper documentation., • Process and execute warranty claims with manufacturers for defective equipment. Perform RMA duties as required., • Interact with customers and site personnel in a professional and courteous manner., • Provide detailed technical summaries and field reports after service visits in accordance with company standards., • Perform comprehensive site inspections and/or site surveys as needed., • Maintain department inventory, tools and equipment., • Occasionally, and on an as-needed basis, serve as a PV installer / electrician on new construction PV and BESS projects. Duties shall include installing conduit, pulling and terminating conductors, installing equipment and enclosures, performing system interconnections and service shutdowns, and other assigned. Requirements: QUALIFICATIONS AND SKILLS Education and Experience • Minimum 3-5 years of experience as a technician in solar O specifically commercial 3-phase systems., • Strong working knowledge of the National Electric Code (NEC), • Minimum 3 years of experience as a solar system installer or electrician on 3-phase commercial or utility-scale systems., • Experience energizing and de-energizing PV and BESS systems following NFPA 70E and other workplace safety requirements., • Demonstrated technical expertise in photovoltaic and electrical systems, including troubleshooting methods and knowledge of various industry manufacturers., • Proficiency with DAS monitoring system hardware and software platforms, with a fundamental understanding of industry standard hardware components., • Proficiency with diagnostic equipment and relevant software tools., • Familiarity with regulatory requirements and industry best practices for safety., • Outstanding communication and interpersonal abilities, both written and verbal., • Experience commissioning and programming commercial inverters., • Experience with batteries, transformers, switchgear and other major system components., • Experience with single axis tracker systems., • Applicable NABCEP O&M certification., • Ability to lift and move objects up to 50lbs., • Qualified and prepared to work on energized or potentially energized electrical systems. This role can be physically demanding and frequently requires working outdoors in various weather conditions, including extreme heat and cold. This role involves frequent climbing, lifting and bending. Benefits: • 401(k), • 401(k) matching, • Dental Insurance, • Employee assistance program, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Parental leave, • Referral program, • Vision insurance

Job Description Why Join Rincon Research Corporation (RRC)? At Rincon Research Corporation, our primary business is innovating, developing, and fielding digital signal processing (DSP) products and services for the United States Defense and Intelligence Communities in support of national security. We are seeking an Electronics Test Technician to join our team. This individual will perform a variety of product tests using detailed work instructions, test procedures, and engineering documents to test and troubleshoot technologically advanced and a highly diverse family of parts/products including CCAs and chassis. Duties will include set up and operation of testing equipment, troubleshooting, documenting test results, and physical movement of materials on and off testing platforms. The successful candidate will have a demonstrated history of initiative, strong work ethic, function well under pressure, and maintain a success-oriented attitude while working with diverse teams. Rincon Research Corporation (RRC), an employee owned company, is seeking a talented, tenacious, results-driven individual to work in a multi-disciplinary R&D environment with similarly motivated electrical engineers, mathematicians, computer scientists, and analysts who are collectively responsible for creating custom digital signal processing solutions and leveraging them to make an operational mission impact. Come join the team that is creating cutting edge signal processing and geolocation systems for the future! What are the primary responsibilities in the Electronics Test Technician position? • Tests, troubleshoots, repairs, maintains, and installs a wide variety of electronic, mechanical, computer, laboratory, and scientific systems and/or equipment., • Assists in the development of procedures., • Observes, analyzes, and reports test data; and when appropriate, makes necessary repairs to equipment., • Utilizes various engineering and scientific drawings, manuals, and other related documentation in the performance of their tasks. May include configuration/data management. What required background will make you successful? • HS Diploma or AA/AS degree (or other 2-year post high school training), • Ability to work directly from approved procedures, schematics, and assembly drawings as well as wiring diagrams, • Ability to troubleshoot electronic circuits to component level and effectively identify failure trends., • Aid the team in isolating problems between the test environment the units under test and resolve as necessary., • Help select appropriate test equipment and configure it based on test specifications., • Effectively communicate technical issues to the engineering team regarding test reports, • Ability to work in a fast-paced Repair/manufacturing/production test environment., • Must work well in a team environment., • Must be well versed in computer architectures and data protocols in order to facilitate networking/interfacing with test equipment, • US CITIZENSHIP REQUIRED Preferred skills: • Experience in the use of computers and software applications (both desktop and technical), • Associates Degree in Electronic Sciences, • Experience using a wide variety of electronic RF/Analog, High Voltage, Digital and other electronic test equipment such as Oscilloscopes, Network Analyzers, Signal Generators, Spectrum Analyzers and Power Meters., • Familiarity in these testing areas: Insertion Loss, VSWR, Phase, gain, SFDR, SNR, Harmonics, S-band, L-band and X-Band frequencies., • Experience inspecting CCAs to IPC 610A or equivalent Where is the position located? This position is located at our Tucson, AZ Headquarters. What benefits does RRC offer? • 100% employer-paid premiums for family medical and dental insurance, employee life insurance, short-term and long-term disability (STD & LTD), • Flexible reimbursement spending accounts for medical expense and dependent care, • Immediate participation and vesting in the company’s Employee Stock Ownership Plan (ESOP) and 401(k) Plan, • Employer contributions to RRC’s ESOP, • Employer matching contributions to the company’s 401( k) Plan

Job Description Job Title: Quality Assurance & Safety Technician Department: Compliance Reports To: Director of Quality Assurance Location: Tucson, AZ - Production Facility Job Type: Full-Time Position Summary The Quality Assurance Technician is responsible for supporting daily food safety and quality operations on the production floor. This includes conducting inspections, collecting samples, verifying records, and enforcing Good Manufacturing Practices (GMPs). The QA Technician plays a key role in monitoring compliance with regulatory standards, internal policies, and customer specifications. This position reports to the Director of Quality Assurance and works closely with production staff to ensure the consistent quality and safety of Tucson Foods products. Essential Duties and Responsibilities Quality Assurance Perform routine quality and food safety checks on raw materials, work-in-progress, and finished goods. Verify compliance with HACCP, GMPs, allergen control, sanitation, labeling, and traceability standards. Accurately document inspection results, test data, and deviations using established forms and logs. Conduct pre-operational inspections, production line audits, and environmental monitoring as needed. Collect product and environmental samples for microbiological and analytical testing. Assist with the investigation of quality issues and customer complaints; document findings and corrective actions. Support internal audits and third-party inspections by maintaining organized records and documentation. Communicate food safety concerns or non-conformances to the Director of QA or appropriate leadership promptly. Help train production staff on basic food safety and quality practices when needed. Ensure QA tools (thermometers, scales, swabs, etc.) are properly calibrated, cleaned, and maintained. Promote a strong food safety culture by modeling compliance and attention to detail on the floor. Safety Actively participate in facility safety programs and promote a culture of safety. Monitor production areas to ensure compliance with OSHA, GMPs, and company safety policies. Assist with safety inspections, incident investigations, and follow-up corrective actions. Support training efforts on proper use of PPE, chemical handling, equipment safety, and safe work practices. Identify and report unsafe conditions, near misses, and potential hazards in a timely manner. Help maintain documentation related to safety programs, including Safety Data Sheet records, safety audits, and safety meeting notes. Qualifications Required: 1+ year of experience in a food manufacturing, commercial kitchen, or QA/QC role Basic understanding of food safety principles and GMPs Ability to accurately follow procedures and complete documentation Strong communication and observation skills Dependable, detail-oriented, and able to work independently Ability to read and write in English; basic math skills Preferred: Prior experience with HACCP, SQF/BRC, or food safety programs Bilingual (English/Spanish) Experience using digital QA systems or databases Physical Requirements Able to lift and carry up to 40 lbs regularly Stand, walk, bend, and climb for extended periods throughout the shift Comfortable working in hot, cold, or humid environments Use of hands and fingers for repetitive tasks such as writing, swabbing, and packaging inspection Work Environment The QA Technician works primarily on the production floor in a commercial food manufacturing facility. The environment may include variable temperatures and exposure to moving equipment, loud noise, and strong food aromas. PPE (personal protective equipment) is required. Company Expectations Follow all food safety, hygiene, allergen control, and sanitation procedures Demonstrate accuracy, timeliness, and professionalism Report food safety issues or equipment concerns immediately Comply with all GMP and company policies Maintain a clean, organized, and respectful work area Shift & Availability Shifts vary based on production schedule and may include early mornings, evenings, weekends, or holidays Full-time, on-site position Compensation and Benefits Hourly wage based on experience Medical, dental, and vision insurance (for eligible employees) Paid time off and paid holidays Referral bonus program Supportive team culture-and tasty tamales every day! Equal Opportunity Statement Tucson Foods is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Job Description Staff Experts, LLC is a highly specialized full-service Staffing & Recruiting Firm. We specialize in staffing in the areas of Engineering, Construction Management, Manufacturing, Information Technology, Aerospace & Defense, Administrative-Accounting-Finance, Call Center Operations, Life Sciences, Healthcare, Skilled Trades and Logistics. Staff Experts, LLC is currently seeking to fill a Mobile Crane Operator position. If you are interested, please email us your resume and call 520-989-9270 to schedule an interview appointment. Qualifications Minimum Qualifications • Mobile Crane Operator certification or license and Completion of an Apprenticeship Program and four (4) years of experience as a Mechanical Mobile Crane Operator in a related industrial maintenance/construction field working on a large mobile crane (150 ton and greater capacity), OR, • Associate's degree in a Mechanical field or closely related field and four (4) years of experience as a Journeyman Mechanical Mobile Crane Operator in a related industrial maintenance/construction field working on a large mobile crane (150 ton and greater capacity), • Passed the Certified Crane Operator Practical exam, • Candidate shall pass the Hands-on test, • Completed DDI and TEAMS training or equivalent, • Must have a Commercial Driver's License (CDL), • Extensive experience in and knowledge of rigging procedures, cable reeling and crane load testing, • Extensive experience with and knowledge of mobile crane preventative maintenance practices and inspection procedures, • Working knowledge of Hydraulic equipment, • Proficient in the use of Microsoft applications and advanced computer skills, • Skills and ability to work in an environment with minimal direction, • Ability to read, understand and apply information from technical manuals, blueprints and schematics for trouble shooting and repair in English Staff Experts, LLC is an Equal Opportunity Employer. Contact Information: Staff Experts, LLC (Tucson Branch) 1611 W Ina Road Tucson, AZ 85704 520-989-9270 Office 520-509-3709 Fax

Job DescriptionABOUT THE ROLE This position is an experienced QC tech of Aggregate materials with an opportunity for growth within the company. An individual will perform laboratory and field inspections of material production and quality control tests in accordance with established local or state standards for both production and shipping. WHAT YOU'LL ACCOMPLISH • Observe and demonstrate a commitment to adhere to all Amrize Safety Standards, Advisories, and Policies., • Perform ongoing product sampling and testing of aggregate to ensure that material produced and shipped will meet state, project, or customer specifications and expectations., • Perform timely repair, and calibration of laboratory testing equipment, as needed., • Performs regular updates to appropriate Quality Control and testing databases and spreadsheets., • Perform testing and assist with any of the company's new aggregate product designs., • Provide troubleshooting guidance and advice for plant quality., • Assist Plant Manager as required., • Work directly with the QC team and Management to complete testing in a timely manner., • Travel to and from jobsites assisting and coordinating the transfer of samples from the field and or multiple mine sites to the laboratory, • Work Experience: Aggregate-Construction Materials QC testing, • High school diploma is a minimum requirement., • Current ATTI Lab Soils/Aggregate Technician Certification or the ability to obtain certifications at a minimum, • Availability and willingness to work flexible hours including nights, weekends, and 12 hr. shifts to meet the company's and customer needs., • Microsoft Office software user abilities, • Competitive salary, • Retirement Savings: Choose from 401(k) pre-tax and/or Roth after-tax savings, • Medical, Dental, Disability and Life Insurance, • Holistic Health & Well-being programs, • Health Savings Accounts (HSAs) & Flexible Spending Accounts (FSAs) for health and dependent care, • Vision and other Voluntary benefits and discounts, • Paid time off & paid holidays, • Paid Parental Leave (maternity & paternity), • Educational Assistance Program, • Dress for your day BUILDING INCLUSIVE WORKSPACES At Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! Amrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email . This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process. While we sincerely appreciate all applications, only candidates selected for an interview will be contacted.]]>

Job DescriptionSalary: $22-$34 hourly DOE Job Summary Under the general direction of the Foreman (and Superintendent), the pipelayer has the general responsibility for assembling, connecting, and the installation of pipe systems for wet utilities (storm or sanitation sewers, drains, and water mains) and/or dry utilities (power, cable, communications, natural gas, and conduit). Responsibilities * Measure and mark pipes to required length for cutting and threading; cut, thread, hammer, and weld pipe to specifications using saws, pipe threaders, and benders; connect pipe pieces and seals joints * Secure pipes to structures with clamps, brackets, and hangers * Grout and clear manholes * Inspect, examine, and test installed systems and pipe lines using pressure hydrostatic testing, observation, or other testing methods * Locate existing pipes needing repair or replacement through potholing and/or excavation * Tap and drill holes into pipes to introduce auxiliary line or devices * Maintain a safe worksite and exhibit safe work practices by following company rules and OSHA regulations, including attendance at all required safety training programs * Wear required Personal Protective Equipment (PPE) including hard hat, eye protection, reflective vest, gloves and composite-toed boots * Be able to performs a wide variety of manual labor tasks involving dexterous use of hand tools such as pneumatic, electric, and hand tools Requirements * High School diploma or equivalent education * 2 years of work related experience in laying underground wet utilities (storm or sanitation sewers, drains, and water mains) and/or dry utilities (power, cable, communications, natural gas, and conduit) * Knowledge of materials, production processes, quality control, costs, and other techniques for maximizing the effective installation or repair of pipelines * Work within special standard of accuracy * Must have flexibility in personal schedule including weekday, overtime with occasional night and weekend work * Strong focus on safety, quality, integrity, productivity, and teamwork * OSHA, confined space, and related safety training a plus * Ability to stand and exert physical effort performing manual labor most of the day * Ability to lift up to 60 pounds regularly and up to 100 pounds occasionally * Ability to work in confined spaces * Ability to understand and follow plans, drawings, and directions (verbal and written) * Willingness to wear required Personal Protective Equipment (PPE) including hard hat, eye protection, reflective vest, gloves and composite-toed boots * Ability to work in severe weather conditions, including extreme heat * Knowledge of hand and power tools required to perform the duty of a pipelayer * Knowledge or experience in underground dry and/or wet utility installation is a must * Knowledge of street and highway traffic rules and regulations, and safety precautions to be observed in working on or near roads and highways * Ability to detect unsafe or hazardous conditions of tools and work environment. * Thorough knowledge of safety standards and Underground Facilities Law (Blue Stake, Arizona 811) * Hold/obtain and maintain an OSHA 10 Certification * Good communication skills and the ability to interact in a team environment * Reliable transportation * Bilingual English/Spanish a plus * Ability to pass pre-employment and random drug tests Work Environment While performing the duties of this Job, the employee is regularly exposed to: * Wet and/or humid conditions * Moving mechanical parts * Precarious places and narrow spaces * Fumes or airborne particles * Outside weather conditions * Extreme heat * Frequent and/or sustained loud noises The employee is occasionally exposed to: * Toxic or caustic chemicals * Risk of electrical shock * Risk of vibration

Job Description General: Support customer flight operations by performing duties as an Instructor Pilot. Mission location will be disclosed at time of interview/hire. Responsibilities: • Lead operation of UAS in accordance with applicable regulatory flight approvals, • Follow and execute test plans and test cards, in conjunction with test engineering and mission operations, • Coordinates ground and flight operations including mission planning, execution, and debriefing; safe operation of the aircraft; aircrew resource management; and customer coordination., • Assist with non-routine experimental program, • Provides recommendations for manual updates, and flexible enough to adapt to sudden changes in mission tasking., • Provides advice and feedback on corrective actions., • Provides technical assistance and guidance to other technical personnel., • Work with engineering on functionality issues and procedure updates., • Communicate with engineering on product performance and functionality issues., • Assist the Technical support group with our customer needs for technical support., • Supports the operations and testing of UAS platforms Minimum Requirements: • 2-4 yrs of experience in this field, • HS Diploma/Associate's, • 500 hours flying experience, • FAA Class II Medical Certificate , Previous UAS Instructor or FAA Certified Flight Instructor Ability to work extended hours and shift work Preferred Experience: • Piccolo Experience; Demonstrated experience flying inter-country missions; Payload and Gimbal Operating Experience; FAA Instrument Rating; FAA Commercial Pilot License, • Graduate from group 3 DOD UAS Course or FAA private pilot license, • 150-300 hrs ULTRA or LEAP Flight Experience Competitive pay with full benefits package and paid time off

Job Description About Us: Arizona Liver Health (ALH) is dedicated to driving high standards of care and advancing medical innovation through leading clinical trials, ensuring patient safety and regulatory compliance, and generating high-quality clinical data. Our network of multiphase, multitherapeutic research, standard of care, and VEN Centers sites is staffed by skilled providers, research, clinic, pharmacy, and patient outreach professionals. ALH operates state-of-the-art facilities and programs to meet the evolving needs of clinical research and overall patient treatment. Job Summary Arizona Clinical Trials and is looking for qualified candidates for the Sub-I / Research APP position in Tucson, AZ. Successful candidates are current Nurse Practitioners (NPs) or Physician Assistants (PAs) who ideally have previous experience in clinical research (Phase II/III preferred) with a high understanding of research protocol and what it means to be a sub-investigator for a clinical trial. The Research APP plays a crucial role in driving and expanding the organization's ability to provide innovative patient care. Title: Research Advanced Practice Provider (APP) Status: Full-time, Exempt Salary: $110,000 - $150,000 per year; Depending on experience Location: Tucson, AZ (Monday-Friday, 7am-4pm, On-site) Reports to: VP of Research Essential job functions/duties Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions. • Responsible for performing patient evaluations, consults, and review of pretreatment for standard of care patients as well clinical research patients., • Educating patients on therapeutic options through available liver clinical trials onsite., • Performs specialized procedure(s) and works with MD on patient diagnosis., • Counseling patients and their families, as well as collaborating with appropriate physicians to provide other appropriate direct care interventions within the scope of practice for physician's assistants or nurse practitioners., • Primary point of contact and assumes responsibilities for managing the care for patients., • Oversee patient care in clinical trials and perform safety medical reviews., • Work with various research staff members such as clinical research coordinators and research recruiters to complete visits and submit accurate source documentation., • Completes detailed review of documentation for studies, charting, and proper informed consents., • Communicate with research team members regarding studies and fully understand the protocols., • Must have previous experience in clinical research with a high level of understanding of research processes and protocols., • Proficient in use of Microsoft applications such as Outlook, Word, Excel, PowerPoint, and OneDrive as well as practice's EMR system (eCW), • Excellent verbal and written communication skills., • Strong ability to identify issues with "quietly unhappy" patients., • Refers patients appropriately., • Demonstrates awareness of quality-of-care metrics and regularly meets them, • Solid interpersonal skills and ability to maintain good working relationships with peers, coworkers, and patients., • Ability to provide patient care with minimal supervision., • Ability to perform in-clinic procedures (such as fibroscans) independently., • Autonomous in call-rotation., • Ability to diagnose and make treatment decisions for patients., • At least one (1) year experience working in a clinic or hospital setting as an NP or PA, • Bilingual (Spanish-speaking) preferred., • Ability to problem solve with systems and processes., • Committed to self-study and learning new skills to enhance work performance, • Great leadership skills required with ability to mentor clinical research team on standard operating procedures and best practices., • Commitment to earning additional certifications/professional titles outside scope of work., • Ability to be resourceful and consult all available resources before asking others for instruction, • Diagnoses and manages care of clinically complex patients with minimal assistance, • Previous outpatient hepatology/gastroenterology experience as an NP or a PA highly preferred., • Bachelor's and Master's Degree in a related Nursing or Physician Assistant Studies Program from an accredited institution, • Certification as a Nurse Practitioner with current RN and NP License or, • Graduate of a university program approved by the Accreditation Review Commission on Education (ARCE) for the Physician Assistant with certification by the National Commission on the Certification of Physician Assistants (NCCPA), license to practice in Arizona, • Must maintain certifications as required by department or division, • Health, Dental, Vision (with HSA plans and employer contribution), • 4 weeks of PTO, • Continuing Medical Education budget (CME) and necessary time off, • 5 Days Sick Time, • 7 Company Holidays + 2 Half-Days, • 401K with company 6% match, • Short & Long Term Disability, • 30-min Call with Internal Talent Partner (Recruiter), • 30-min video interview with Hiring Manager, • 90-min onsite interview to tour the clinic and meet Founder, • Reference Check, • Hiring Decision / Offer Affirmative Action/EEO statement It is the policy of the Institute for Liver Health DBA Arizona Liver Health and Arizona Clinical Trials to provide equal employment opportunities without regard to race, color, religion, sex, national origin, age, disability, marital status, veteran status, sexual orientation, genetic information or any other protected characteristic under applicable law. This policy relates to all phases of employment, including, but not limited to, recruiting, employment, placement, promotion, transfer, demotion, reduction of workforce and termination, rates of pay or other forms of compensation, selection for training, the use of all facilities, and participation in all company-sponsored employee activities. Provisions in applicable laws providing for bona fide occupational qualifications, business necessity or age limitations will be adhered to by the company where appropriate. Other duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Other responsibilities may be communicated directly by the reporting manager/supervisor. Duties, responsibilities, and activities may change at any time with or without notice. [Notice to Staffing Agencies] It is our policy that any and all contact with third party staffing or recruitment vendors come through our Talent Acquisition Team directly. We have an established and preferred network of contracted partners that we engage if and when we deem it necessary. We request that staffing agencies refrain from repeatedly contacting our hiring managers or employees directly. Unsolicited resumes, onsite solicitations, and inquiries will not be considered or responded to. Overly persistent and forceful inquires may also be blocked across our network at the domain level as spam. Thank you for your understanding and cooperation.

Job Description Who We Are: Velocity Vehicle Group (VVG) is a premium commercial brand medium to heavy truck dealership that offers the full-service experience for our customers, from an outstanding sales organization to highly skilled technicians to service your vehicle, and on demand parts. Our goal is to be your one stop shop experts for all truckers, owner operators, fleets and companies. This coupled with our Leasing and Rental business and our Financial services business make VVG the leading Truck dealership. What’s in it for You: VVG is a fast paced and growing organization that is looking for candidates that are ready for a daily challenge and cannot wait to provide superior customer service both internally and externally. VVG offers fantastic Culture as well as competitive pay, 401K W/Match, Medical, Dental, & Vision benefits. Become a part of our team and immerse yourself in a company that fosters a Great Place to Work™ culture! What You’ll Do: We are seeking a dedicated Mobile Service Technician to join our team. As a Mobile Service Technician, you will be responsible for providing on-site maintenance, repairs, and upgrades for a variety of vehicles and equipment. You will travel to customer locations in a service truck to perform inspections, diagnose issues, and complete necessary repairs. This role requires versatility, technical expertise, and a commitment to delivering exceptional service to our customers. Job Duties • Determines vehicle condition by conducting Preventive Maintenance Inspections, oil changes, chassis lubrication while identifying worn and damaged parts, installing component and part upgrades on light, medium, and heavy-duty tractors and other equipment., • Performs inspections at customers location with a service truck which could include inclement weather at times. Maintains the service truck to standard including cleanliness and resupply., • Performs service calls dispatching to provide diagnosis and repairs related to vehicle breakdowns., • Corrects vehicle deficiencies identified by repairing, replacing, adjusting, disassembling and assembling, components in all major equipment system areas., • Verifies vehicle performance by conducting test drives; adjusting controls and systems., • Performs tire replacements, rotations, mounting and dismounting on and off of vehicles as needed., • Complies with federal and state vehicle requirements by testing engine, safety, and combustion control standards., • Maintains vehicle records by annotating services and repairs., • Contains costs by using warranty; evaluating service and parts options. Job Qualifications & Requirements • High School Diploma or its equivalent required., • Post-Secondary vocational education strongly preferred., • Experience in mechanical inspections and repairs in a related field., • Must have a valid driver’s license, • Fleet and mobile maintenance experience a plus., • Ability to understand and adhere to company policies in all areas., • Must have a basic set of hand tools up to 1 ½”and ½ drive pneumatics., • Technical understanding with attention to detail., • Strong verbal communication and documentation skills., • Capable of maintaining accurate inventory control., • Ability to implement a strong safety environment at all times., • Ability to work alone with little or no direction at times. Physical Requirements: • Must be able to pass post offer drug test, physical and lift. Compensation: • Hourly $32-$42/hr. depending on experience and qualifications, • Full Time position Benefits Velocity Vehicle Group Offers: • Fantastic Culture, • 401k + match, • Health, Dental & Vision Insurance + HSA & FSA, • Employer paid Life Insurance, • Paid Vacation Days, • Sick Leave, • Company perks such as employee discounts, company events and training programs, • Excellent Training and Career Advancement Opportunities Velocity Vehicle Group is an equal opportunity employer. Velocity Vehicle Group prohibits discrimination and harassment of any type and affords equal employment opportunities to employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. Company Description

Job DescriptionCompany Description Segula Technologies is a global engineering and consulting firm specializing in innovative solutions across industries such as aerospace, automotive, energy, rail, and life sciences. Founded in 1985 and headquartered in France, Segula operates in over 30 countries, driving technological advancements, improving industrial performance, and supporting clients throughout the product lifecycle. With expertise in design, manufacturing, testing, and project management, Segula helps businesses tackle complex engineering challenges while fostering innovation and sustainability. Job Description • You will adhere to General Work Requirements, • Adhere to General Work Requirements, • Facilitate technical training courses and programs, for example, advertising and scheduling of courses, rooms, equipment and coordinating course evaluations, • Assist in development of curriculum, materials, and teaching aids, for example, training handbooks, demonstration models, video content, and reference workbooks, • Coordinate with quality team on audits and training related issues, • Coordinate and maintain inventory of purchased training materials, • Perform data entry, record keeping, and tracking of personnel training and certification requirements, training attendance, and course evaluations for internal use as well as documented compliance with regulatory agencies and customers, • Coordinate travel arrangements and accommodations for personnel attending off-site training as required by assigned site, • Performs other duties as assigned.Qualifications, • 3 years aircraft maintenance work experience or substantiated equivalent experience, • 1 plus year corporate / commercial jet experience, • Experience in developing and administering technical training programs, • Interpersonal skills necessary to develop and maintain effective working relationships with regulatory agencies and representatives, all levels of management team, suppliers, and other departments and sites throughout Bombardier Aerospace, • Basic knowledge of heavy maintenance practices within business and/or regional aircraft industry as required by assigned site, • Basic knowledge of training system development and administration principles, • Basic knowledge of FAR training regulations part 145 and 163, • Working knowledge of training techniques and video production, • Working knowledge of education instructional techniques and design, • Planning and organizational skills necessary to plan, prioritize, and coordinate workload within a multiple project setting, • Training skills necessary to create, deliver, and evaluate curriculum and materials, • Computer skills necessary to operate word processing, spreadsheet, presentation, training, email, and web-based applications, • Presentation skills, • Verbal and written communication skills Additional Information This role is initially a maternity leave cover for up to 4 months. However, if you perform exceptionally well, there may be an opportunity to transition into a permanent position afterward. Here’s a heads-up of the upcoming steps: • Phone Interview with Recruiter: We’ll begin with an introductory call to discuss your background and interest in the role., • Interview with Hiring Manager: We’ll schedule a technical interview to go over your experience and qualifications in more detail., • Offer Letter: We´ll extend you an offer and start the onboarding process., • Background Check & DOT Drug Screen: This step involves conducting a comprehensive background check, which includes reviewing criminal history, and other relevant records. Additionally, a Department of Transportation (DOT) drug screening will be carried out to ensure compliance with federal regulations for safety-sensitive positions, • You start your next challenge!

Job Description This position will require access to ITAR and/or EAR controlled technical data, technology or source code, and requires that all individuals in this role be authorized to access such information. General Description: The Production Technician reports to the Production Supervisor within their area of assignment. The Production Technician is responsible for working on production projects that require a higher level of experience, assisting in the training of operators in the proper processing of product, and working with engineers in the transition of jobs from development to production. The Production Technician also performs the general work of a Production Operator. This position requires a safety and quality conscious person who is energetic, and goal orientated. Personal contact with others outside of the department will typically involve interaction with technical and quality assurance personnel to give information on product related concerns. Strong communication skills are required. The work environment may involve the handling of hazardous chemicals. The ability to use a personal respirator is required. The physical demands of the position may involve standing for extended periods, as well as periodic lifting of items weighing up to 75 lbs. This classification applied to: Mill Room: Mixing, Calendaring, Extruding. Primary Responsibilities: • Achieve daily and job specific goals, • Establish lean manufacturing techniques in processes, • Train operators in the proper processing of product, • Practice safe and efficient work habits, • Provide support to engineering and product management in the development of new jobs, • Perform the general work of a Production Operator Education and Experience Requirements - External Candidate: • High School diploma or equivalent, • Minimum of three (3) years' experience within a similar manufacturing environment, • Ability to interpret technical drawings in area of specialty, • Experience conducting process audits, • Experience in cause analysis and preparing corrective actions, • Must complete and pass testing requirements for position of specialty within the first ninety days of employment, • Ability to set up, operate and shut down equipment within area of specialty, • Lean manufacturing experience in previously held position(s), • Ability to complete production forms, such as product travelers, • Ability to accurately utilize measuring equipment, such as calipers, thickness gages, weigh scales, and tape measures, • Advance knowledge of quality requirements and in-process inspection techniques, • Basic computer skills preferred Education and Experience Requirements - Internal Candidate • High School diploma or equivalent, • Minimum of three (3) years employment at R. E. Darling- Preferred, • Ability to interpret technical drawings in area of specialty, • Experience conducting process audits (must have conducted six (6) process audits and reported findings), • Experience in cause analysis and preparing corrective actions (must have conducted one (1) cause analysis investigation and have prepared a corrective action relating to the cause analysis investigation), • Must complete and pass testing requirements for position of specialty, • Ability to set up, operate and shut down equipment within area of specialty, • Completion of internal Lean manufacturing training, • Ability to complete production forms, such as product travelers, • Ability to accurately utilize measuring equipment, such as calipers, thickness gages, weigh scales, and tape measures, • Advance knowledge of quality requirements and in-process inspection techniques, • Basic computer skills preferred Specific Tasks and Focus Areas: • Achieve daily and job specific goals, • Manage all jobs assigned from start-up to shut-down, • Utilize advanced knowledge of manufacturing methods used in area of specialty, • Utilize advanced knowledge of equipment operations within area of specialty, • Produce product per the manufacturing instructions and drawings, • Utilize knowledge of methods and materials to identify problems, • Proficient processing of requisitions (purchase and material), • Support immediate lead person/supervisor in decision making, • Produce quality parts by adhering to quality requirements and utilizing in-process inspection techniques for assigned jobs, • Maintain a good communication loop with engineering, quality, management, production operators and maintenance and provide support to each department as needed, • Fill in for Lead/Supervisor when necessary, • Establish lean manufacturing techniques in processes, • Set-up areas that maintain lean thinking, • Support the lean daily management system, • Conduct shift start up meetings, • Train operators in the proper processing of product, • Evaluate quality of product produced by the trainee for conformance, • Establish training criteria for manufacturing processes, • Lead by example and maintain a professional relationship with trainees, • Support Company mission statement and values, • Practice safe and efficient work habits, • Know safety procedures and safety equipment in work area, • Support a safe work environment and production practices, • Utilize proper PPE at all times, • Provide support to engineering and product management in the development of new jobs, • Support engineering in the development on new processes, • Support production in the troubleshooting of processing problems, • Generate engineering change requests, • Develop basic manufacturing processes, • Provide training to production operators, • Perform the general work of an operator “AA/EOE/W/M/Vet/Disable” R.E. Darling Co., Inc. is an equal opportunity employer. All qualified applicants will receive consideration of employment without regard to race, religion, color, national origin, gender, gender identity, sexual orientation, age, status as protected veteran, among other things, or status as qualified individual with disability.

Job Description gTANGIBLE Corporation (gTC), , is a S corporation and a registered Government contractor that provides services and solutions in: • National Security Programs, • Professional, Administrative, and Management Support, • Mission and Warfighter Support We are a Service Disabled Veteran Owned Small Business (SDVOSB) and the founder has years of successful experience in the Government contracting arena. Our leadership team is an exceptional group of Government contracting professionals. gTANGIBLE is in the process of identifying candidates for the following position. Requisition Type: Contingent (Open) Position Status: Full Time Position Title: Information Systems Security Manager (ISSM) I Location: Tucson, AZ Security Clearance Level: Top Secret/SCI, SAP Information eligible, consent for Counterintelligence polygraph Duties and Responsibilities The Air Force (AF) Special Access Program (SAP) Security Support Services (SSS) assists the AF cognizant security authority in oversight of enhanced National Security Objectives supporting AF SAP interests through active and integrated security operations, processes, mechanisms, and management. This support provides multi- disciplinary security support, including specialized analytical/program protection support, while being responsive and flexible to dynamic SAP security situations. The ISSM's primary function serves as a principal advisor on all matters, technical and otherwise, involving the security of information systems under their purview. Primary support will be working within Special Access Programs (SAPs) supporting Department of Defense (DoD) agencies, such as HQ Air Force, Office of the Secretary of Defense, and Military Compartment efforts. The position will provide "day-to-day" support for Collateral, Sensitive Compartmented Information (SCI) and Special Access Program (SAP) activities. Duties include the following: • Perform oversight of the development, implementation and evaluation of information system security program policy; special emphasis placed upon integration of existing SAP network infrastructures., • Develop and oversee operational information systems security implementation policy and guidelines of network security, based upon the Risk Management Framework (RMF) with emphasize on Joint Special Access Program Implementation Guide (JSIG) authorization process., • Advise customer on Risk Management Framework (RMF) assessment and authorization issues., • Perform risk assessments and make recommendations to DoD agency customers., • Advise government program managers on security testing methodologies and processes., • Evaluate authorization documentation and provide written recommendations for authorization to government PMs., • Develop and maintain a formal Information Systems Security Program., • Ensure that all IAOs, network administrators, and other cyber security personnel receive the necessary technical and security training to carry out their duties., • Develop, review, endorse, and recommend action by the AO or DAO of system assessment documentation., • Ensure approved procedures are in place for clearing, sanitizing, and destroying various types of hardware and media., • Develop and execute security assessment plans that include verification that the features and assurances required for each protection level functioning., • Maintain a and/or applicable repository for all system authorization documentation and modifications., • Institute and implement a Configuration Control Board (CCB) charter., • Develop policies and procedures for responding to security incidents, to include investigating and reporting security violations and incidents., • Ensure proper protection or corrective measures have been taken when an incident or vulnerability has been discovered within a system., • Ensure that data ownership and responsibilities are established for each authorization boundary, to include accountability, access rights, and special handling requirements., • Ensure development and implementation of an information security education, training, and awareness program, to include attending, monitoring, and presenting local cyber security training., • Evaluate threats and vulnerabilities to ascertain whether additional safeguards are needed., • Assess changes in the system, its environment, and operational needs that could affect the authorization., • Ensure that authorization is accomplished a valid Authorization determination has been given for all authorization boundaries under your purview., • Review AIS assessment plans., • Coordinate with PSO or cognizant security official on approval of external information systems (e.g., guest systems, interconnected system with another organization)., • Conduct periodic assessments of the security posture of the authorization boundaries., • Ensure configuration management (CM) for security-relevant changes to software, hardware, and firmware and that they are properly documented., • Ensure periodic testing is conducted to evaluate the security posture of IS by employing various intrusion/attack detection and monitoring tools (shared responsibility with ISSOs)., • Ensure that system recovery and reconstitution processes developed and monitored to ensure that the authorization boundary can be recovered based on its availability level determination., • Ensure all authorization documentation is current and accessible to properly authorized individuals., • Ensure that system security requirements are addressed during all phases of the system life cycle., • Develop Assured File Transfers (AFT) on accordance with the JSIG., • Conduct the duties of the Information System Security Officer (ISSO) if one is not present and/or available. Knowledge and Qualifications • Bachelor's degree in a related area and 5-7 years of related experience or 9-11 years of related experience without a degree., • Prior performance in roles such as ISSO or ISSM., • Must meet position and certification requirements outlined in DoD Directive 8570.01-M for Information Assurance Technician Level II or Information Assurance Manager Level I within 6 months of the date of hire., • Must having working knowledge of DoD, National and applicable service and agency security policy, manuals and standards., • SAP experience desired.

Job Description Alta Environmental & Infrastructure (Phoenix and Tucson) is seeking energetic and highly motivated engineering interns to join our team in Phoenix and Tucson locations. The ideal candidate will have a technical background / education in geotechnical, civil, geological, environmental, engineering, construction or related field. Current students and recent graduates are encouraged to apply. You'll get to work side-by-side with experienced, licensed professionals who are committed to personal and professional development. Our offices are close to campus and foster a diverse, interactive and safety-focused culture! Alta E&I is a full-service Engineering, Surveying, and Construction Material Testing Company. We have partnered with the most reputable and knowledgeable architects, developers, building contractors, institutions, and government agencies. Alta E&I provides performance driven solutions throughout the asset life cycle, from concept to decommissioning. These projects have primarily been in the Phoenix and Tucson metropolitan areas but have included other locations in the State of Arizona. Alta E&I is one of the fastest growing Engineering companies in the state. We strive to be the best technical services consultant to work with, work for and invest in! Responsibilities and Expectations: • Assist in preparing technical reports, • Ability to work on a team or independently on less complex projects, • Excellent written and verbal communication skills, • Clean driving record and the ability to pass a drug test required, • Travel to and Perform field sampling or testing, • Collect and classify soil samples for geotechnical investigations, • Ability to adhere to safety standards and practices, • Excellent communication skills, both written and verbal, • Knowledge of MS Office, including Word, Excel, and Power Point, • Knowledge of Autodesk Civil 3D, • Organization skills Must be able to work outdoors in all weather conditions and may be required to lift up to 50 pounds. Travel Travel is primarily local during the business day. Qualifications: Currently enrolled in college or recent graduate with a bachelor’s degree in Geotechnical, Civil, Geological Engineering or related field. Must have a valid drivers license and be able to drive to our project sites. Supervisory Responsibility This position has no supervisory responsibilities. All applicants must be able to complete pre-employment onboarding requirements (if selected) which may include the following: criminal/civil background check and drug screen EQUAL EMPLOYMENT OPPORTUNITY POLICY STATEMENT. It is the policy of Alta E&I not to discriminate against any applicant for employment, or any employee because of age, color, sex, disability, national origin, race, religion, or veteran status.