Welder jobs in Bloomfield, New JerseyCreate job alerts

The Welder I Perform Electron beam welding on assemblies following procedures; able to set up and tend machines designed to weld through the use of a high-velocity electron beam.

The Entry-Level B Welder is responsible for performing basic welding and repair tasks on steel waste containers and compactors. This position focuses on structural reinforcement, minor fabrication, and the restoration of worn or damaged units under s Welder, Welding, Equipment Maintenance, Transportation, Skilled Trades, Repair

Location: Bergen County, NJ Compensation: $35–$45/hour + Benefits Schedule: Night Shift Monday–Friday, 4:00 pm to 1:30 am A growing food manufacturer is seeking an experienced Fabricator / Sanitary Welder NIGHT SHIFT to support Engineering and Maintenance. This is a hands-on role for someone capable of independently taking stainless-steel fabrication projects from layout and fabrication through welding, finishing, installation, and turnover. The ideal candidate has advanced sanitary welding and stainless-steel fabrication experience and can serve as a technical resource within the plant. Responsibilities • Fabricate, modify, install, and repair stainless-steel equipment, piping, tanks, conveyors, platforms, guarding, hoppers, and other components., • Perform high-quality TIG and MIG welding, including thin-gauge and sanitary stainless applications., • Lay out, cut, form, grind, polish, passivate, and finish stainless steel and other metals., • Read blueprints, weld symbols, P&IDs, schematics, and engineering drawings., • Build components from drawings and field measurements., • Support equipment installations, utility tie-ins, capital projects, and equipment upgrades., • Fabricate replacement parts to reduce equipment downtime., • Apply sanitary design standards using 304/316L stainless and food-grade materials., • Support troubleshooting, preventive maintenance, and continuous improvement., • Mentor less-experienced fabricators and maintenance technicians. Qualifications • 7+ years of hands-on welding and fabrication experience., • 3+ years in food, beverage, dairy, pharmaceutical, or another sanitary manufacturing environment., • Advanced TIG and MIG stainless-steel welding skills., • Experience with sanitary tubing, Tri-Clamp fittings, weld ferrules, and butt welds., • Strong stainless-steel layout, fabrication, grinding, polishing, and finishing skills., • Ability to independently complete fabrication projects., • Ability to read engineering drawings, weld symbols, and P&IDs., • Knowledge of sanitary design, GMPs, food safety, and CIP systems., • AWS D1.6 or ASME Section IX certification is a strong plus., • Orbital welding experience preferred. Why Join? • $35–$45/hour, • Monday–Friday night shift, • Benefits, • Skilled fabrication work with significant autonomy, • Opportunity to support equipment improvements and capital projects, • Stable, growing food manufacturing environment Occasional weekend or shutdown work may be required.

Job Description Railcar Repairman (Carman) • Repairs, modifies, and upgrades rail cars., • Rebuilds car components: bolsters, side framers, hitch heads, and box car doors., • Welds (up to 30% of time), fabricates, and uses a cutting torch., • Performs mechanical labor (frequently - 95% of time)., • Repairs and maintains railcars, according to blueprints and other specifications, using hand tools, power tools, and precision measuring instruments. Inspects machines and equipment visually by touch, special knowledge, and training, to locate causes of trouble., • Operates forklift to move, align, and set in place parts in place., • Measures, cuts, and threads pipes and replaces air lines using hand tools., • Assembles subassemblies, major components, and equipment. Checks the function to test for proper operation., • Repairs broken parts using hand tools and welding equipment., • Enters car repair information via electronic keyboard system. MARGINAL FUNCTIONS: • Maintains a clean work environment., • May set up and operate metalworking tools, such as a welder or grinder., • All other duties as assigned by the supervisor. PERFORMANCE STANDARDS: • Must perform each job to specified time standards., • Work must be done to the customer's requirements (AAR, FMO, FRA, TTX, etc., standards)., • Must comply with all work rules., • Must work safely and not cause a threat to the health and safety of oneself and others. MACHINE/EQUIPMENT/TOOLS USED: • Circular saw., • Air impacts 1/2", 3/4", 1"; Air grinders 4", 7", 9"; Air or hydraulic portable power pump and ram used regularly., • Various hand tools are used frequently., • Cutting torch used for cutting frequently; heating torch used while bending regularly; side grinder used for grinding regularly; hoist used for lifting regularly; winch used for pulling regularly. SAFETY EQUIPMENT: • Steel-toe shoes, hard hat, earplugs, safety glasses, welding shield, burning goggles, grinding shield, and proper clothing (long-sleeved shirts and long pants while welding). PHYSICAL REQUIREMENTS: • Physical abilities (approximate times - vary slightly by location): standing, hearing, and seeing for 8 or 10 hours; handling for 6 hours; walking, stooping, kneeling, crouching, and fingering for 5 hours; reaching below waist, twisting, and feeling for 2 hours; sitting, climbing, balancing, crawling, reaching over head, and talking for 1 hour. Frequently: standing, kneeling, stretching, reaching, gripping tools or objects, and bending at the waist, • Regularly: walking, crouching, and twisting while standing. Occasionally: sitting, crawling, and twisting while sitting for 1 hour or less., • Lifting: car parts from 1-80 lbs. throughout the day (lifting 10-25 lbs. frequently; 25-50 lbs. regularly; over 50 lbs. occasionally)., • Wrenches weighing up to 10 lbs. to tighten bolts (occasionally - 4 hours)., • Pulling: 10-25 lbs. frequently; 25-50 lbs. regularly; over 50 lbs. occasionally; carrying 50-75 lbs. QUALIFICATIONS: • Knowledge: mechanical skills., • Skills: welding and cutting., • Mental factors: decision-making and reasoning; intermediate (such as determining when parts should be repaired); planning and scheduling - limited; compiling/classifying/gathering information - intermediate; short-term memory - intermediate. WORKING CONDITIONS: • Working environment: Requires outdoor work (8 or 10 hours/day; exposure to heat, cold/humidity; working at heights regularly; working around moving machinery occasionally., • Environmental Conditions: Exposure to welding and burning fumes, odors, dust, gases, and uncomfortable noises from welding and burning (10 hours/day); working in hot temperatures regularly; working in cold temperatures occasionally; driving automotive equipment occasionally; working with oil and grease regularly; working with vibrations regularly; and working alone occasionally., • Hazard Exposure: Mechanical from tools; electrical from welders; and radiant energy from torches frequently (10 hours/day). WORKING SCHEDULE: • 8 to 10-hour shifts; work hours and rest days may change regularly., • Must be available to work a flexible schedule, which may include shift work, nights, weekends, and holidays., • Must be available to attend a mandatory 4-week training program after hire. REPORTING RELATIONSHIP: • Reports to the line supervisor or work group supervisor. PAY RATE: • The pay rate for the Railcar Repairman position begins at $28/hour. Pay rate is determined based on Carman/Journeyman status. DISCLAIMER: Management reserves the right to modify or adjust duties and essential functions at any time based on operational needs. The frequency of essential and marginal functions, use of equipment/tools, physical requirements, and working conditions may vary depending on railcar type, weather, and location-specific restrictions. However, all Maintenance Specialists are expected to perform the same core responsibilities. About Us TTX Company is a leading provider of railcars and related freight car management services to the North American rail industry. TTX’s pool of railcars is ideal for supporting shippers in the intermodal, automotive, paper & forest, metals, machinery, wind energy and other markets where flatcars, boxcars and gondolas are required.TTX’s generous Total Rewards package includes Paid Time Off, Health, Dental and Vision benefits, and 401(k) with company match. This position participates in Railroad Retirement. TTX Company is an Equal Employment Opportunity Employer. About the Team What we do: Provide reliable, cost effective an innovative railcar solutions for the markets we serve. Ensure an injury-free work place. Build and develop a highly capable team of subject matter experts and leaders at every level in our organization. Bring new product and process innovation to the rail car industry. Continuously improve our products, processes and systems in a cost effective manner by using modern design techniques and data analytics. Achieve, maintain and support cross company alignment with the TTX company mission statement. Posting Link: https://ejjc.fa.us6.oraclecloud.com/hcmUI/CandidateExperience/en/sites/CX/job/6545/?utmmedium=jobshare&utmsource=External+Job+Share You should be proficient in: • Heavy Equipment Repair, • Mechanical Troubleshooting Skills, • Pneumatics Troubleshooting, • Maintenance and Repair Skills, • Lift Truck Repair & Maintenance, • Diesel & Heavy Equipment Systems, • Equipment Diagnostics & Troubleshooting, • Mechanical Systems & Component Repair, • Equipment Repair & Maintenance, • Automotive Manufacturing Systems, • Automotive Repair & Service Systems, • Aircraft Maintenance

The Welder Class 2 is a mid-level welding position responsible for welding prefabricated components and fabricating assemblies from blueprints. The position requires the ability to independently set up welding equipment, interpret fabrication drawing Welder, Welding, Manufacturing, Staffing, Production, Fabrication

A growing food manufacturing facility in Bergen County is looking for an experienced Welder/Fabricator to join its night-shift team. This is a hands-on role supporting production equipment, facility needs, equipment modifications, repairs, and custom fabrication projects throughout the plant. Key Responsibilities • Perform TIG welding and stainless-steel fabrication, • Complete sanitary welding and fabrication on equipment used within a food production environment, • Fabricate, modify, repair, and install equipment and components, • Build and repair guards, brackets, frames, supports, and custom-fabricated pieces, • Perform cutting, fitting, grinding, measuring, layout, and finishing, • Work from blueprints, sketches, measurements, and existing equipment, • Support maintenance and engineering with equipment repairs, modifications, and improvement projects, • Maintain sanitary standards and proper weld finishes required for food-processing equipment Required Experience • Sanitary welding/fabrication experience – REQUIRED, • Strong TIG welding experience, • Strong stainless-steel fabrication background, • Experience producing clean, precise welds and sanitary finishes, • Experience working on equipment within food, beverage, pharmaceutical, dairy, cosmetic, medical, or another sanitary Manufacturing environment, • Ability to fabricate from prints, measurements, sketches, or existing equipment, • Strong cutting, fitting, grinding, layout, and finishing skills, • Ability to work independently on fabrication and equipment-repair projects Environment: Food manufacturing / sanitary production Schedule: Night Shift All qualified applicants will receive consideration without regard to race, age, color, sex (including pregnancy), religion, national origin, disability, sexual orientation, gender identity, marital status, military status, genetic information, or any other status protected by applicable laws or regulations. GPAC (Growing People and Companies) is an award-winning search firm specializing in placing quality professionals within multiple industries across the United States since 1990. We are extremely competitive, client-focused and realize that our value is in our ability to deliver the right solutions at the right time.

Job Description Alternate Concepts, Inc. (ACI) and Herzog Transit Services, Inc. (HTSI), collectively the ACI/Herzog Joint Venture, along with our key subcontractors are seeking applicants for the Hudson Bergen Light Rail operation located in Hudson County, New Jersey. ACI was founded in 1989 with their corporate office located in Boston, MA and Herzog founded in 1969 with corporate offices located in St. Joseph, MO and Fort Worth, TX. Combined with our companies provide FRA/FTA compliant transportation, equipment maintenance, dispatching, right-of-way maintenance, facility maintenance and dispatching services for 20 distinct client properties. In addition to the Joint Venture being the upcoming operator/maintainer of the Hudson Bergen Light Rail, we currently jointly operate the Tren Urbano heavy rail service in San Juan, Puerto Rico and the CTDOT’s Hartford intercity service in Connecticut. ACI/Herzog Joint Venture, along with our key subcontractors, are currently seeking a Full-Time Track Maintainer to join our team. The starting pay rate for this position is $15.99 per hour. ACI-Herzog Joint Venture offers a competitive benefits package for eligible employees, including paid-time-off, medical, dental, and vision coverage; employer-paid life and AD&D insurance; short-term and long-term disability coverage; and a 401(k) retirement savings plan. Voluntary employee-paid benefits include supplemental life and AD&D insurance, critical illness, hospital indemnity, and accident coverage. The Track Maintainer is responsible for the maintenance, repair, inspection, and emergency response related to track within the Hudson Bergen Light Rail (HBLR) system. This role emphasizes safety, operational excellence, and effective team collaboration under varying conditions. Duties and Responsibilities: • Installs railroad track and embankments including special track work, road crossings, signage, and rail lubricators., • Capable of using hand and power tools and a wide variety of sizes and types of track machines including:, • Spike pullers, spike drivers, tie adze, hydraulic rail jacks, power wrenches, tie boring machines, rail drills, rail grinders, and rail saws., • Highway trucks equipped with rail guide wheels, hydraulic booms, and lift gates to remove and replace ties, rails, fasteners - cut or screw spikes, anti-creepers, bolts, elastic clips, insulators, rail seat pads, and conventional and insulated rail joints, special track work components, crushed rock ballast, crossing surfaces, paving, subgrade material, vegetation, signs, and structures., • May work as a member of a crew or independently., • May work under the direction of a Railroad Track Foreman or Track Welder., • Regular and consistent engagement, participation and promotion of ACI-Herzog’s Culture and its essential behaviors are a requirement for this position., • Regular and predictable attendance and punctuality are a requirement for this position., • Other duties as assigned. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the specific knowledge, skills, and/or abilities required. • Must be legal to work in the U.S.A., • Must possess a valid driver’s license., • Must be able to pass a pre-employment physical and drug screening as well as a background check and motor vehicle report review. Education and/or Experience: • High School diploma or equivalent., • Previous maintenance experience., • Ability to complete work under time pressures and to maintain composure under the stress of emergency situations., • Must be able to work well with others. Language Skills: • Able to read, write, and communicate (speak, hear, and understand) the English language in a work setting., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals., • Ability to write regulatory and departmental reports and correspondence., • Ability to speak effectively before groups of customers or employees of the organization. Mathematical Skills: • Ability to work with mathematical concepts including but not limited to proficiency in adding, subtracting, multiplying and dividing all units of measure., • Ability to apply concepts such as fractions, percentages, ratios and proportions to practical situations., • Ability to compute ratio, rates, percentages and able to draw and interpret graphs and tabular data sets. Reasoning Ability: • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists., • Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Certificates, Licenses, Registrations: • Must successfully complete Light Rail operations training program and Light Rail Operator recertification annually., • Possession of a valid driver’s license and any other certificates, licenses and registrations as required by law to perform the specified functions., • Must be certified in CPR/AED. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • The employee must be able to distinguish between visual colors., • While performing the duties of this job, the employee is regularly required to stand, walk, sit; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop; kneel, crouch, or crawl; talk or hear; and taste or smell., • The employee must occasionally lift and/or move up to 75 pounds., • Specific vision abilities required by this job include close vision, and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. • While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts and outside weather conditions. The noise level in the work environment is usually moderate. AHJV reserves the right to revise this job description from time to time. NOTE: The above statements are intended to describe the general nature and level of work performed by employees assigned to this position. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of employees assigned to this job. It is the policy of ACI/Herzog Joint Venture to provide equal opportunity in employment for all qualified individuals regardless of race, color, religion, ethnicity, national origin, ancestry, disability, medical condition, age, citizenship, sex, sexual orientation, gender, gender identity, gender expression, marital status, pregnancy, genetic information, military status, veteran status, and any other characteristic protected by law.

Job Description TIG WELDER An industry leader in the design, manufacturing and distribution of custom stainless-steel equipment for the food service, plumbing and materials handling industry is looking for experienced TIG welders responsible for fitting and welding of stainless steel parts using TIG process. PRIMARY RESPONSIBILITIES o Set up welding machines o Read and interpret blueprints and/or drawings to determine the specific welding requirements o Fit and TIG weld stainless steel components based on the specifications of the blueprints and/or drawings o Insure work conforms to prints and quality requirements. o Follow production plans and required daily output requirements. o Assists with material cutting and preparation as needed. Including sawing, grinding and deburring. o Keep work areas clean and organized and take proper care of all equipment and facilities o Provide a great level of attention to detail and focus on the given task o Follow all safety rules and quality standards o Work together with team members to maximize productivity and efficiency KNOWLEDGE AND SKILL REQUIREMENTS o High School Diploma or equivalent preferred o One-year related experience and/or training through a certified training facility. o Experience with stainless steel TIG welding required o Ability to lift up to 50 pounds independently. o must be able to stand, kneel, stoop. o Ability to identify and measure material types and thicknesses o Ability to produce quality products consistently o Ability to follow instructions given both verbally and in written form o Must be reliable with a strong work ethic We are an Equal Employment Opportunity Employer. We offer a competitive salary with great benefits. The position is full-time; Monday-Friday. 1st shift, 7:30 Am to 4:00 PM with some overtime. Benefits: o Retirement Plan o Health insurance o Paid time off Schedule: o 8-hour shift o Day shift o Monday to Friday o Overtime Work Location: One location

Job Description We are seeking a part-time Welding Instructor to work alongside the senior instructor, follow the welding curriculum, and support students in the classroom and welding lab. Schedule: Monday-Thursday 4:30pm to 9:30pm Duties and Responsibilities • Assist with student instruction in both the classroom and welding lab, • Guide and support student learning in a safe, structured environment, • Demonstrate welding, cutting, fitting, and fabrication techniques, • Prepare materials and projects for instruction, • Weld, fabricate, cut, and visually inspect welds on a variety of materials and processes, • Work with mild steel, stainless steel, and aluminum, • Facilitate workshop sessions as needed, • Enforce all shop and lab safety procedures, • Perform other duties as assigned Qualifications • Current welding certification or completion of an AWS program, trade school, 900-hour welder/fabricator program, or equivalent training., • and/or 5-7 years of documented industry experience, • Strong knowledge of welding theory, welding code requirements, and certification standards, • Demonstrated commitment to workplace and lab safety, including the ability to follow and enforce safety protocols, • Ability to work effectively with students of diverse backgrounds, skill levels, and learning needs, • Ability to pass a multi-process welding and cutting evaluation, • Minimum of 5 years of experience in fabrication, fitting, ironwork, welding, CNC, pipe, or related metalworking industries, whether civilian or military, • Comfortable demonstrating and instructing SMAW, GMAW, FCAW, GTAW, plasma cutting, and oxy-fuel cutting in multiple positions, • Minimum of 3G certification or equivalent skill level in at least two welding processes Certifications • Destructive test certification, • OSHA certification, • Torch and fire watch certification, • DOT certification Candidate must pass a practical welding test. The completion of a background check will be required for the selected candidate. Compensation: The hourly pay for this position is $28. Benefits: • New Jersey Sick Leave: Earn 1 hour of sick leave for every 30 hours worked with a maximum of 40 hours of leave per benefit year. (Eligible to use after successful completion of probationary period.), • Employee Assistance Program provides free, confidential, limited counseling services, work-life assistance, legal and financial guidance., • Commuter Benefits: Free parking access is provided on site. An optional Transit Pre-Tax Plan is available which allows employees to use pre-tax dollars to purchase eligible transit expenses., • NJ Defined Contribution Retirement Program provides eligible members with a tax-sheltered, defined contribution retirement benefit, along with life insurance and long-term disability coverage. (Must meet eligibility requirements.)

Job DescriptionWelder Fairfield, NJ Manufacturing Facility Shift: 2nd Shift, Monday–Friday, 2:30 PM–11:00 PM Pay: $17.50–$19.75/hr base + $2.25/hr shift differential ($19.75–$22.00/hr, based on experience) About the Role We're looking for Welders to join our Fabrication department on 2nd shift. You'll weld frames, legs, and other components, working from assembly drawings to produce quality parts and correct anything that falls out of spec. What You'll Do • Set up and operate TIG and MIG welding machines, • Select the correct jig or fixturing for each job, • Weld aluminum and steel parts as needed, • Complete drill and grind work as required, • Inspect finished welds and rework parts that are out of spec, • Read and interpret assembly drawings, BOMs, and related procedures, • Navigate computer-generated production boards, • Keep your workstation clean per 5S and safety protocols, • Support daily work and special projects alongside your team What You'll Need • High school diploma or GED, • Previous welding experience preferred, • Mechanical aptitude and the ability to follow directions, • Comfortable reading assembly drawings and BOMs, • Reliable attendance and flexibility with changing priorities, • Basic comfort navigating production systems on a computer Physical Requirements Standing up to 10 hours/day with frequent bending, reaching, and coordinated hand movements. Lifting up to 50 lbs regularly and up to 100 lbs occasionally. Steel-toed shoes, welding mask, and supplemental PPE (weld gloves, sleeves, jackets/aprons) required. Warehouse environment, no air conditioning Full-time, Weekly Pay, and Benefits • 5 Days of PTO, • 6 Paid Holidays, • Paid Sick Leave, • Up to 50% of health insurance premiums paid, • Access to a retirement plan, financial fitness, and employee savings programs

Job Description Job Summary We are seeking an experienced Welder or Welder-Mechanic with at least 5 years of hands-on welding and fabrication experience to join our team. The ideal candidate will be skilled in welding, metal fabrication, trailer and truck body repairs, and general repair work. Candidates with mechanical experience are highly preferred, as this role may also assist with preventive maintenance, inspections, and general fleet repairs. This position offers an opportunity to work on a variety of commercial trailers, straight trucks, liftgates, and tractors in a fast-paced repair environment. What We Offer • Competitive pay $35- $40 per hour, • Medical, Vision, Dental, Life Insurance, • 401k with employer contribution, • Vacation, Holidays and Sick days, • Stable full-time employment, • Opportunity for overtime, • Variety of challenging repair and fabrication work, • Growth opportunities for skilled technicians and mechanics Schedule: Sunday to Thursday 9pm - 5am Required Welding & Fabrication Experience • Minimum 5+ years of welding experience, • MIG (wire) welding, • TIG and stick welding, • Aluminum welding, • Metal fabrication and custom repairs, • Cutting, grinding, and finishing metal components, • Torch cutting and metal shaping, • Reading measurements and fabricating accurately from specifications, • Strong problem-solving and fabrication skills, • Body Repair Experience, • Preparation and painting of repaired components, • Body filler (Bondo) application and repair, • Repairing damaged body panels and structural components, • Ability to restore equipment to safe operating condition Primary Responsibilities • Perform trailer body repairs including:, • Sidewalls, • Floors, • Roofs, • Corner rails, • Top and bottom rails, • Floor beams and cross members, • Side, freezer, and liftgate steps, • Repair and replace trailer landing legs and associated components, • Repair straight truck bodies and structural components, • Diagnose and repair hydraulic liftgates (Maxon, Palfinger, Waltco, and others), • Fabricate custom parts, brackets, hooks, and components as needed, • Repair and weld rear axle/banjo housings, • Replace and paint tractor and truck hoods, • Replace and paint bumpers on tractors and straight trucks, • Maintain a clean and safe work environment, • Complete work efficiently while meeting quality standards Preferred Mechanical Experience • Candidates with mechanical experience will receive strong consideration and higher compensation. Additional responsibilities may include:, • Preventive Maintenance (PM) services, • DVIR (Driver Vehicle Inspection Report) repairs, • General trailer and truck maintenance, • Assisting with fleet repair operations as needed Qualifications • 5+ years of welding and fabrication experience, • Experience working on commercial trucks and trailers preferred, • Ability to safely operate welding, cutting, grinding, and fabrication equipment, • Ability to read measuring tools and perform precise fabrication work, • Strong attention to detail and workmanship, • Ability to lift heavy materials and work in a shop environment, • Valid driver's license preferred, • Mechanical repair experience is a plus If you're a skilled welder who takes pride in quality craftsmanship, or a well-rounded welder/mechanic looking for a long-term opportunity, we'd love to hear from you. Apply today!

Job Description Role Snapshot Picture your day: you start with a safety huddle, review work orders, and step onto the track to bring railcars back to life. You’ll diagnose issues by sight, touch, and training; rebuild critical car components; and verify every repair against stringent rail industry standards. By the end of your shift, you’ll have logged precise repair notes via an electronic keyboard system and seen the direct impact of your craftsmanship on North America’s freight network. What You’ll Do • Repair, modify, and upgrade freight railcars to spec., • Rebuild key components, including bolsters, side framers, hitch heads, and boxcar doors., • Weld, fabricate, and use a cutting torch (welding up to 30% of your time; hands-on mechanical work approximately 95%)., • Use blueprints and technical specifications to perform mechanical repairs with hand and power tools and precision measuring instruments., • Inspect equipment by visual checks and tactile assessment using your specialized knowledge and training to pinpoint root causes., • Operate a forklift to move, align, and position components accurately., • Measure, cut, and thread pipe; replace air lines using appropriate hand tools., • Assemble subassemblies and major components; function-test to ensure proper operation., • Repair broken parts using hand tools and welding equipment., • Enter repair details and codes via an electronic keyboard system. Also Part of the Job, • Keep the work area orderly and clean., • Set up and operate metalworking tools (e.g., welder or grinder) as needed., • Pitch in on other tasks assigned by your supervisor. Performance & Quality Benchmarks, • Meet established time standards for each task., • Deliver work that meets customer and governing requirements (AAR, FMO, FRA, TTX, etc.)., • Follow all work rules and procedures., • Work safely at all times to protect yourself and your team. Tools & Equipment You’ll Use, • Circular saw., • Air impacts (1/2", 3/4", 1"); air grinders (4", 7", 9"); air or hydraulic portable power pump and ram (regular use)., • Common hand tools (frequent use)., • Cutting torch (frequent cutting); heating torch for bending (regular); side grinder for grinding (regular); hoist for lifting (regular); winch for pulling (regular). Required PPE, • Steel-toe shoes, hard hat, earplugs, safety glasses, welding shield, burning goggles, grinding shield, and proper clothing (long-sleeved shirt and long pants while welding). Physical Demands, • Approximate activity times (vary slightly by location): standing, hearing, and seeing for 8–10 hours; handling for 6 hours; walking, stooping, kneeling, crouching, and fingering for 5 hours; reaching below waist, twisting, and feeling for 2 hours; sitting, climbing, balancing, crawling, reaching overhead, and talking for 1 hour., • Frequent: standing, kneeling, stretching, reaching, gripping tools/objects, bending at the waist., • Regular: walking, crouching, twisting while standing. Occasional: sitting, crawling, twisting while sitting for 1 hour or less., • Lifting railcar parts from 1–80 lbs throughout the day (10–25 lbs frequently; 25–50 lbs regularly; over 50 lbs occasionally)., • Use wrenches up to 10 lbs to tighten bolts (occasionally—up to 4 hours)., • Pulling forces: 10–25 lbs frequently; 25–50 lbs regularly; over 50 lbs occasionally; carry 50–75 lbs. Work Environment, • Outdoors 8–10 hours/day with exposure to heat and cold/humidity; regular work at heights; occasional work near moving machinery., • Frequent exposure to welding/burning fumes, odors, dust, gases, and elevated noise (up to 10 hours/day); regular hot temperatures; occasional cold; occasional driving of automotive equipment; regular exposure to oil/grease and vibration; occasional solitary work., • Hazards include mechanical (tools), electrical (welders), and radiant energy (torches), frequently up to 10 hours/day. Schedule & Training, • 8–10 hour shifts; work hours and rest days may change regularly., • Flexibility to work shifts, nights, weekends, and holidays., • Mandatory 4-week training program after hire. Reporting Line & Pay, • Reports to the line supervisor or work group supervisor., • Starting pay: $28/hour; rate based on Carman/Journeyman status. Qualifications, • Mechanical aptitude and experience., • Welding and cutting skills., • Ability to make sound decisions and reason through repairs; intermediate short-term memory and information gathering; limited planning/scheduling. About TTX TTX Company provides railcars and freight car management services across North America. Our diverse fleet supports intermodal, automotive, paper and forest products, metals, machinery, wind energy, and other markets where flatcars, boxcars, and gondolas are essential. We offer a robust Total Rewards package with Paid Time Off, Health, Dental, and Vision benefits, and a 401(k) with company match. This position participates in Railroad Retirement. Our Team Mission • Deliver reliable, cost-effective, and innovative railcar solutions., • Prioritize an injury-free workplace., • Develop a deep bench of subject matter experts and leaders at every level., • Drive product and process innovation for the railcar industry., • Continuously improve products, processes, and systems using modern design techniques and data analytics, aligned with TTX’s mission. Apply Posting Link: https://ejjc.fa.us6.oraclecloud.com/hcmUI/CandidateExperience/en/sites/CX/job/6545/?utmmedium=jobshare&utmsource=External+Job+Share Preferred Proficiencies • Heavy Equipment Repair, • Mechanical Troubleshooting Skills, • Pneumatics Troubleshooting, • Maintenance and Repair Skills, • Lift Truck Repair & Maintenance, • Diesel & Heavy Equipment Systems, • Equipment Diagnostics & Troubleshooting, • Mechanical Systems & Component Repair, • Equipment Repair & Maintenance, • Automotive Manufacturing Systems, • Automotive Repair & Service Systems, • Aircraft Maintenance Legal TTX Company is an Equal Employment Opportunity Employer. Note Management reserves the right to modify or adjust duties and essential functions at any time based on operational needs. The frequency of essential and marginal functions, use of equipment/tools, physical requirements, and working conditions may vary depending on railcar type, weather, and location-specific restrictions. However, all Maintenance Specialists are expected to perform the same core responsibilities.

Job Description We are looking for a Welder - Diesel Mechanic - Machine Operator to join our team! You will be responsible for repairing various vehicles and equipment Responsibilities: • Repair Diesel Equipment, • Perform routine maintenance, • Use diagnostic tools to test vehicle components, • Perform quality inspections, • Machine Operator Qualifications: • Previous experience as a mechanic, • Knowledge of shop equipment, • Strong mechanical aptitude and troubleshooting skills, • Deadline and detail-oriented, • Ability to thrive in a fast-paced environmentCompany DescriptionSolid Waste Transfer Station visit www.Lemcortransfer.com for more informationSolid Waste Transfer Station visit www.Lemcortransfer.com for more information

Job Description We are hiring a Welder/Metal Fabricator for their Metal Fabrication company. The Welder/Metal Fabricator will be involved in all parts of the fabrication process, from raw material to finished product. This is a Temp to Perm opportunity, with company benefits once converted to Direct Hire. The Welder/Fabricator will have the opportunity to fabricate high profile projects throughout New York City! Welder/Metal Fabricator Responsibilities • Cut, assemble, and weld metal components for stairs, railings, and other structural projects using provided blueprints and specifications., • Review drawings and completed work to identify errors, troubleshoot issues, and ensure accuracy and quality standards are met., • Work independently and with team members to complete projects efficiently and within established timelines., • Assist with the handling, movement, and organization of materials throughout the fabrication facility. Welder/Metal Fabricator Requirements • Minimum 3 years of welding and fabrication experience, • Ability to read and interpret blueprints and technical drawings, • Strong attention to detail and commitment to quality workmanship, • Ability to work independently as well as collaboratively within a team environment Welding Test will be administered as part of the interview process Schedule: Monday – Friday Hours: 7am – 3:30pm (Overtime Availability) Pay: $21- $34/hr. depending on experience

Job Description Seeking entry level welder to learn and grow. Reports to: Welding supervisor & Manager Responsibilities: cleaning, cutting, brushing, grinding, tacking, fitting, welding, using MIG & Stick Minimum Educational Qualifications High school Diploma /GED Minimum Previous Experience 1 year experience in shop setting

Perform Electron beam welding on assemblies following procedures; able to set up and tend machines designed to weld through the use of a high-velocity electron beam.Review work orders to ensure familiarization with job requirements.Follow technical instructions, interpret engineering blueprints and

Perform Electron beam welding on assemblies following procedures; able to set up and tend machines designed to weld through the use of a high-velocity electron beam.Review work orders to ensure familiarization with job requirements.Follow technical instructions, interpret engineering blueprints and

This may include safety training, DOT, OQ, welder testing, and site-specific requirements.

Job SummaryPerform Electron beam welding on assemblies following procedures; able to set up and tend machines designed to weld through the use of a high-velocity electron beam. Perform welding using Heli-arc, Spot weld, and Electron Beam equipment. Inspect parts continuously to ensure that the weldi

Location: Bergen County, NJ | Compensation: $40$45/hour + Benefits | Schedule: MondayFriday, 6:00 AM3:30 PM A growing food manufacturer is seeking an experienced Fabricator / Sanitary Welder to support Engineering and Maintenance. This is a hands-on role for someone capable of independently taking stainless-steel fabrication projects from layout and fabrication through welding, finishing, installation, and turnover. • Fabricate, modify, install, and repair stainless-steel equipment, piping, tanks, conveyors, platforms, guarding, hoppers, and other components., • Perform high-quality TIG and MIG welding, including thin-gauge and sanitary stainless applications., • Lay out, cut, form, grind, polish, passivate, and finish stainless steel and other metals., • Read blueprints, weld symbols, P&IDs, schematics, and engineering drawings., • Build components from drawings and field measurements., • Support equipment installations, utility tie-ins, capital projects, and equipment upgrades., • Fabricate replacement parts to reduce equipment downtime., • Apply sanitary design standards using 304/316L stainless and food-grade materials., • Support troubleshooting, preventive maintenance, and continuous improvement., • Mentor less-experienced fabricators and maintenance technicians., • 7+ years of hands-on welding and fabrication experience., • 3+ years in food, beverage, dairy, pharmaceutical, or another sanitary manufacturing environment., • Advanced TIG and MIG stainless-steel welding skills., • Experience with sanitary tubing, Tri-Clamp fittings, weld ferrules, and butt welds., • Strong stainless-steel layout, fabrication, grinding, polishing, and finishing skills., • Ability to independently complete fabrication projects., • Ability to read engineering drawings, weld symbols, and P&IDs., • Knowledge of sanitary design, GMPs, food safety, and CIP systems., • AWS D1.6 or ASME Section IX certification is a strong plus., • Orbital welding experience preferred., • $40$45/hour, • MondayFriday, • Benefits, • Skilled fabrication work with significant autonomy, • Opportunity to support equipment improvements and capital projects, • Stable, growing food manufacturing environment Occasional weekend or shutdown work may be required.

Must have 4+ years welding experience.Must be able to successfully pass a weld test.Must have the ability to weld in 2g, 4g, and 6g conditions.Must be able to Stick and Tig weld on Pipe.Must have experience welding multiple types of pipes including but not limited to carbon steel, stainless, and chr

WelderSince 1953, Ferguson has been a source of quality supplies for a variety of industries.Together We Build Better infrastructure, better homes and better businesses.We exist to make our customers' complex projects simple, successful, and sustainable.We proactively solve problems, adapt and grow

Entry-Level B WelderInterstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Connecticut, with a state-of-the-art rail served landfill located in O

This is a senior-level position for a highly skilled fabricator who can independently take stainless-steel fabrication projects from concept and layout through welding, finishing, installation, and turnover. This individual will work closely with Engineering, Maintenance, and Production and serve as

Welders-Direct HireWe're seeking Welders to work with a premier manufacturing client in Kearny, NJ.Direct HireJob SummaryThe Welder Class 2 is a mid-level welding position responsible for welding prefabricated components and fabricating assemblies from blueprints.The position requires the ability to

Welder/FabricatorDonjon Marine, LLC, an established and expanding New Jersey-based Salvage and Diving company, is seeking an experienced, safety-driven, and reliable candidate to fill the role of a generic welder/fabricator in our Salvage Team. This is not a typical welder/fabricator position—each

The A Welder / Fabricator is a senior-level technician responsible for high-quality welding, fabrication, and structural rebuilding of steel containers and compactors. The A Welder works independently on complex repair tasks and supports the training and development of entry-level team members. Ment

We are looking for a Welder - Yellow Diesel Mechanic to join our team! You will be responsible for repairing various vehicles and equipment.Repair Yellow Diesel Equipment.Use diagnostic tools to test vehicle components.Machine Operator skills to move equipment slated for repair.Previous experience a

Prior welding technical school, vocational training, or equivalent welding education/experience. Minimum 3 years of recent welding experience.

Job Description Our client is a ommercial and industrial boiler contractor serving building owners, property managers, hospitals, universities, manufacturers, and process facilities across New Jersey and the greater New York metropolitan area. Our work spans new boiler and boiler room installations, code repairs and alterations to pressure-retaining equipment, burner and controls retrofits, preventive maintenance agreements, emergency service, and efficiency upgrade projects. We are seeking a General Manager to take full operational and financial ownership of the business. This is a true P&L role. You will run service, construction, and shop operations day to day, own the numbers that ownership sees every month, protect and advance our code certifications, and build a durable leadership culture in a trade where skilled labor is scarce and loyalty is earned rather than bought. The right person is equal parts operator, financial thinker, and people leader — comfortable in a boiler room at 2 a.m. and in front of a spreadsheet the next morning. This role exists to professionalize how the business runs without breaking what already works. You will inherit experienced field technicians and long-standing customer relationships. Your job is to raise margin, tighten execution, and modernize systems while keeping the crew intact and the phone answered. Core Responsibilities Profit & Loss Ownership You own the P&L outright — top line, gross margin, overhead, and net. You will be accountable for annual budgeting, monthly forecasting, and the variance conversations that follow when actuals miss plan. • Build and defend the annual operating budget across every revenue line: service labor, preventive maintenance agreements, projects and retrofits, parts and equipment sales, rental, and shop work., • Own gross margin by division and by job. Understand where margin is made and where it leaks — mispriced service calls, unbilled work, warranty rework, unmanaged overtime, change orders never captured., • Manage work-in-progress and percentage-of-completion reporting on project work, including over/under billings, cost-to-complete accuracy, and backlog quality., • Drive cash performance: billing velocity, DSO, retainage recovery, unbilled revenue, and vendor terms., • Approve pricing, quoting standards, labor rates, and markup structures; make the call on which work is worth chasing and which is not. Financial Reporting & Analysis Produce the monthly financial package that ownership relies on to make decisions. This is not accounting support work — you are expected to build the reporting, interpret it, and act on it. • Assemble and present a monthly package including P&L with budget variance, gross margin by revenue line, backlog and WIP schedules, cash flow and aging, and KPI dashboards with commentary on what moved and why., • Build the operating metrics that run the business: technician billable utilization and labor efficiency rates, revenue per technician, first-time fix rate, callback percentage, average service ticket, quote-to-close conversion, PM agreement renewal and attachment rates, and overtime as a percentage of field labor., • Prepare capital request business cases for fleet, tooling, shop capacity, and headcount, with payback and return expectations stated plainly., • Develop customer-facing financial proposals for capital projects — installed cost, projected fuel and efficiency savings, simple payback and lifecycle cost, and applicable utility incentive and rebate capture. Operations, Code Compliance & the R Stamp Program You are the executive owner of our quality and code program. You are not expected to personally perform inspections or weld, but you are expected to understand what our certifications require and to make sure the organization never puts them at risk. • Maintain the integrity of the company’s National Board R Certificate of Authorization: enforce the Quality Control Manual in daily practice, support the designated QC Manager, manage the relationship with our Authorized Inspection Agency, and lead preparation for triennial National Board review and renewal audits., • Ensure repairs and alterations to pressure-retaining items are performed and documented to NBIC (NB-23) requirements, including R-1 and R-2 form execution, proper nameplate and stamping practice, and complete traceability of materials and welder qualifications., • Govern the welding program: ASME Section IX WPS, PQR, and welder performance qualification currency; continuity logs; and NDE coordination with third-party testing partners., • Apply ASME Section I, Section IV, and Section VIII Division 1 requirements appropriately across power boilers, heating boilers, and pressure vessels., • Enforce ASME CSD-1 controls and safety device requirements and NFPA 85 combustion safety practice on automatically fired equipment., • Own field execution across service dispatch, project scheduling, manpower planning, procurement and equipment lead times, subcontractor management, fleet, and shop throughput., • Own safety outcomes and the metrics that follow the company into every bid: TRIR, DART, and Experience Modification Rate. Lockout/tagout, confined space entry for boiler and vessel work, hot work, and respiratory protection are non-negotiable disciplines. Team Leadership & Change Management The technical problems in this business are solvable. The people problems are the hard part, and they are the reason this role exists. We are looking for high emotional intelligence — someone who reads a room, hears what a technician is actually saying under a complaint, and can hold a hard line without humiliating anyone. • Lead a multi-disciplinary team spanning field service technicians, boilermakers and welders, project managers, estimators, dispatch, and administrative staff., • Introduce process, measurement, and accountability into an environment that has historically run on relationships and tribal knowledge — and do it in a sequence the team can absorb. Sequencing and communication matter more than the changes themselves., • Build the succession bench: recruit, develop, and retain technicians in a labor market where the experienced boiler mechanic pool is shrinking and every competitor is fishing in the same pond. Own the apprenticeship and mentoring pipeline., • Set clear performance expectations, run consistent one-on-ones and reviews, coach the willing, and move decisively on the unwilling., • Serve as the escalation point for customer conflict, jobsite disputes, and internal friction — de-escalating without conceding margin. Commercial Growth & Customer Retention • Grow recurring revenue through preventive maintenance agreements and full-coverage service contracts; improve renewal rates and expand scope within existing accounts., • Support estimating and bid strategy on larger installations and retrofits; sit at the table on the accounts that matter., • Position the company on efficiency-driven work — burner and controls upgrades, condensing economizers, boiler plant optimization, fuel conversions, and decarbonization retrofits — where regulatory pressure is generating demand., • Maintain relationships with OEMs, distributors, engineering firms, mechanical contractors, and property management groups. Requirements Required Qualifications • Ten or more years of progressive operations leadership in commercial or industrial boiler, mechanical HVAC, power generation, or process piping contracting, including at least five years with direct P&L accountability., • Demonstrated experience operating inside an R Stamp certified organization — you have lived under a Quality Control Manual, worked alongside an Authorized Inspector, and been through a National Board review., • Working command of ASME Boiler and Pressure Vessel Code and the National Board Inspection Code as they apply to repair, alteration, and new installation., • Track record of improving gross margin and operating income in a service-and-project business, with specific numbers you can speak to., • Proven ability to build financial reporting from operational data and present it credibly to an owner, board, or private equity sponsor., • Experience leading fifteen or more employees across field and office functions, including hiring, development, and performance management., • Fluency with service management and ERP platforms and the discipline to make a team actually use them., • Bachelor’s degree in engineering, construction management, business, or a related field — or an equivalent combination of trade credentials and operating experience., • Valid driver’s license and willingness to be present in the field and at customer sites throughout the NJ/NY territory. Preferred Qualifications • Direct experience managing or holding responsibility for an R Stamp quality program, including manual authorship or revision and audit preparation., • Additional ASME certifications in the organization’s scope, such as S, U, PP, or A stamps, and National Board VR experience., • Prior background as a boiler technician, boilermaker, welder, or field service engineer before moving into management., • Experience with combustion analysis, boiler efficiency testing, stack loss and thermal efficiency measurement, O2 trim, turndown optimization, and heat recovery., • Union contract administration experience in the NJ/NY market., • Formal change management, Lean, or continuous improvement training., • Experience integrating an acquired business or standing up new systems and processes post-acquisition. Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Short Term & Long Term Disability, • Compensation: $100,000 - 150,000 base salary + bonues and car allowance

Job Description About PTS: Trusted, Responsive, and Nationwide Phillips Tank & Structure (PTS) is a growing, team-oriented, nationwide tank construction company with headquarters in Braddock, Pennsylvania, just outside of the City of Pittsburgh. We have over 190 employees and branch offices in Texas, California, Kentucky, and Hawaii. We specialize in designing, engineering, repairing, and constructing above-ground metal storage tanks and related structures, including welded tanks, bolted tanks, and geodesic domes. We have active projects in various industries, such as petroleum, power, chemical, and renewable fuels. At PTS, our commitment to our customers shapes everything we do. We have served companies across an array of industries, handling new tanks, repairs, and modifications. Our collective methodology, industry knowledge, and exhaustive range of abilities permit us to meet one-of-a-kind needs of our customers as they react to industry expectations. We believe in good quality and on-time delivery. We provide an excellent working relationship based on integrity and professionalism. Why Choose PTS? • Positive Work Culture: PTS employees experience a healthy blend of creativity, accountability, motivation, and improvement through team-based interactions with peers and other group members., • Professional Development: PTS is a growing company with many opportunities for advancement. PTS' systems-based approach to training and development helps employees quickly find the path to success in our company., • Intellectual Satisfaction: Being part of a team that executes unique and challenging projects throughout the country and actually builds something is an exciting endeavor. Our Core Principles • Service: The primary expectation for all employees at PTS is to focus on service. We are called to serve our customers as well as our co-workers and suppliers. We endeavor to build a cohesive team of employees who care about the well-being of the group., • Planning and Problem Solving: Planning and problem solving should be utilized to achieve productivity. We will strive every day to be organized and efficient in our approach. We will always look for better ways to achieve results rather than propagating inefficient or inaccurate methods., • Personal Development: Every employee should assist in the development of co-workers just as each employee should pursue their own personal development. Mentor and teammate relationships lay the groundwork for future growth and rewards. We are currently looking to hire a full-time Foreman/Tank Builder Job Duties: • Foreman are responsible for providing site supervision and site-based senior leadership of a PTS construction project. • Acts as point of contact with customer, vendors and subcontractors on site., • Works to maintain Safety, Quality and Productivity., • The Field Foreman is responsible for understanding the contract scope of work and for the identification of field-initiated scope changes (change orders). • Provides leadership regarding Safety on the jobsite. Fosters a Safety Culture within the crew., • Provides leadership regarding Quality on the jobsite. Eliminates “go-backs”, rejected or sloppy work. • Enhances field productivity. Consistently perform projects under budget and on time., • Balances customer satisfaction with profitability of the project. Keeps customers happy yet protects the company regarding scope changes and barrier time. • Provides craft knowledge and experience to the crew. Expertise in several areas of PTS specialty work (welding, structural erection, tank repair, new tank construction, rigging etc.) • Evaluates field employees and identifies those who are candidates for promotion. Provides guidance and training to assist in their development. Communicates the employee evaluation information to Construction Managers and HR. • Assists Construction Managers and HR in recruiting field workers., • Responsible for the care and maintenance of all tooling and equipment, and immediately calling equipment off rent when no longer needed • Utilizes experience and skills to identify opportunities for improvement of company practices and resources. • Represents PTS in a professional, positive light to customers and employees., • Provides a positive contribution to pre-construction planning effort., • Communicates well with the support staff (i.e. Design, Purchasing, PM, Admin), • Knows and understands the estimated manhours and scope on projects prior to job start. Works with PM in tracking progress weekly (Field Labor Reports). • Works with Safety Specialist, Construction Administration and HR to assure that employees assigned to upcoming or ongoing work have received the necessary training and certifications. This may include safety training, DOT, OQ, welder testing, and site-specific requirements. • Completes all necessary paperwork i.e. – daily time sheets, safety and quality audits, customer required paperwork, equipment inspections etc., • Advises Project Management of potential problems, work interferences, and schedule difficulties; assists in resolving such problems, as required. • Provides complete, final, project paperwork to Design Group at end of projects for creating of the Final QC Book. Requirements • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development., • Paid Time Off (accruing immediately), • You’ll be part of a team where YOU matter To Apply: If interested, complete the job application from our website at www.phillipstank.com/careers. We are an Equal Employment Opportunity employer. Powered by JazzHR 9fV7OtpanF

Job Description About PTS: Trusted, Responsive, and Nationwide Phillips Tank & Structure (PTS) is a growing, team-oriented, nationwide tank construction company with headquarters in Braddock, Pennsylvania, just outside of the City of Pittsburgh. We have over 190 employees and branch offices in Texas, California, Kentucky, and Hawaii. We specialize in designing, engineering, repairing, and constructing above-ground metal storage tanks and related structures, including welded tanks, bolted tanks, and geodesic domes. We have active projects in various industries, such as petroleum, power, chemical, and renewable fuels. At PTS, our commitment to our customers shapes everything we do. We have served companies across an array of industries, handling new tanks, repairs, and modifications. Our collective methodology, industry knowledge, and exhaustive range of abilities permit us to meet one-of-a-kind needs of our customers as they react to industry expectations. We believe in good quality and on-time delivery. We provide an excellent working relationship based on integrity and professionalism. Why Choose PTS? • Positive Work Culture: PTS employees experience a healthy blend of creativity, accountability, motivation, and improvement through team-based interactions with peers and other group members., • Professional Development: PTS is a growing company with many opportunities for advancement. PTS' systems-based approach to training and development helps employees quickly find the path to success in our company., • Intellectual Satisfaction: Being part of a team that executes unique and challenging projects throughout the country and actually builds something is an exciting endeavor. Our Core Principles • Service: The primary expectation for all employees at PTS is to focus on service. We are called to serve our customers as well as our co-workers and suppliers. We endeavor to build a cohesive team of employees who care about the well-being of the group., • Planning and Problem Solving: Planning and problem solving should be utilized to achieve productivity. We will strive every day to be organized and efficient in our approach. We will always look for better ways to achieve results rather than propagating inefficient or inaccurate methods., • Personal Development: Every employee should assist in the development of co-workers just as each employee should pursue their own personal development. Mentor and teammate relationships lay the groundwork for future growth and rewards. We are currently looking to hire a full-time Foreman/Tank Builder Job Duties: • Foreman are responsible for providing site supervision and site-based senior leadership of a PTS construction project. • Acts as point of contact with customer, vendors and subcontractors on site., • Works to maintain Safety, Quality and Productivity., • The Field Foreman is responsible for understanding the contract scope of work and for the identification of field-initiated scope changes (change orders). • Provides leadership regarding Safety on the jobsite. Fosters a Safety Culture within the crew., • Provides leadership regarding Quality on the jobsite. Eliminates “go-backs”, rejected or sloppy work. • Enhances field productivity. Consistently perform projects under budget and on time., • Balances customer satisfaction with profitability of the project. Keeps customers happy yet protects the company regarding scope changes and barrier time. • Provides craft knowledge and experience to the crew. Expertise in several areas of PTS specialty work (welding, structural erection, tank repair, new tank construction, rigging etc.) • Evaluates field employees and identifies those who are candidates for promotion. Provides guidance and training to assist in their development. Communicates the employee evaluation information to Construction Managers and HR. • Assists Construction Managers and HR in recruiting field workers., • Responsible for the care and maintenance of all tooling and equipment, and immediately calling equipment off rent when no longer needed • Utilizes experience and skills to identify opportunities for improvement of company practices and resources. • Represents PTS in a professional, positive light to customers and employees., • Provides a positive contribution to pre-construction planning effort., • Communicates well with the support staff (i.e. Design, Purchasing, PM, Admin), • Knows and understands the estimated manhours and scope on projects prior to job start. Works with PM in tracking progress weekly (Field Labor Reports). • Works with Safety Specialist, Construction Administration and HR to assure that employees assigned to upcoming or ongoing work have received the necessary training and certifications. This may include safety training, DOT, OQ, welder testing, and site-specific requirements. • Completes all necessary paperwork i.e. – daily time sheets, safety and quality audits, customer required paperwork, equipment inspections etc., • Advises Project Management of potential problems, work interferences, and schedule difficulties; assists in resolving such problems, as required. • Provides complete, final, project paperwork to Design Group at end of projects for creating of the Final QC Book. Requirements • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development., • Paid Time Off (accruing immediately), • You’ll be part of a team where YOU matter To Apply: If interested, complete the job application from our website at www.phillipstank.com/careers. We are an Equal Employment Opportunity employer. Powered by JazzHR 8LZ3NNYNQp

Perform Electron beam welding on assemblies following procedures; able to set up and tend machines designed to weld through the use of a high-velocity electron beam.Review work orders to ensure familiarization with job requirements.Follow technical instructions, interpret engineering blueprints and

This is your opportunity to obtain a dynamic and rewarding career at the Philips Latham, New York site where magnetic resonance imaging magnets are manufactured.Completing high quality TIG and MIG welds and using precision instruments.Cutting, bending, drilling, tapping, and similar operations as re

This is your opportunity to obtain a dynamic and rewarding career at the Philips Latham, New York site where magnetic resonance imaging magnets are manufactured.Completing high quality TIG and MIG welds and using precision instruments.Cutting, bending, drilling, tapping, and similar operations as re

This is your opportunity to obtain a dynamic and rewarding career at the Philips Latham, New York site where magnetic resonance imaging magnets are manufactured.Completing high quality TIG and MIG welds and using precision instruments.Cutting, bending, drilling, tapping, and similar operations as re

The Welder is responsible for very precise TIG Welding / Fabrication of custom chambers and/or components using customer supplied drawings and/or blueprints while holding tolerances of +/-.

Interpret blueprints, drawings, and measurements to plan layouts.Weld small and large components such as copper plumbing, beams, and pipelines.Use specialized machinery for industrial welding and oversee machines that perform the same job.Maintain and repair all machinery.Assess welded surfaces, str

The TIG Welder will perform layout, fabrication, installation, testing, and repair of shipyard or vessel welding projects.

Welder Job Duties: Expertly welds small, medium, and large bore pipe of various metals and alloys.