Trabajos electrical industry en AccringtonCrear alertas

Lead Engineer | Blackburn | Up to £45,000 | Permanent | We have an exciting opportunity for a Lead Engineer to join a well-established facilities and engineering team based in Blackburn. This is a full-time, permanent role working 37.5 hours per week, Monday Friday 07.00 - 15.00 The Role You'll take the lead on all engineering activity across the site, ensuring planned and reactive maintenance is delivered to the highest standard while supporting and mentoring the wider engineering team. Key responsibilities include: Overseeing the prompt completion of all planned, reactive and remedial work orders Providing routine and specialist engineering maintenance and breakdown support on site Offering technical, health, safety and environmental support across the facility Training, mentoring and supporting site-based technicians and engineering assistants Providing engineering advice and support to site management Leading by example and helping build a strong, collaborative team culture What You'll Need City & Guilds Part 3, ONC or NVQ Level 3 (or above) in Mechanical or Electrical Engineering Time-served apprenticeship in a mechanical or electrical discipline CSCS card (or ECS card if electrically qualified) at the appropriate level Strong understanding of Health & Safety legislation and ACOPs Knowledge of L8 Legionella guidelines What's On Offer Up to £45,000 depending on experience 25 days holiday rising to 30 with service Private healthcare scheme covering pre-existing conditions Private pension scheme Non-contributory life insurance Enhanced maternity, paternity and adoption pay Industry leading training and development Staff discounts and rewards hub TPBN1_UKTJ

SLINGCO is an award-winning supplier of high-quality tools and accessories for the installation and handling of cable, with over 40 years of industry heritage. We serve customers in over 70 countries worldwide from our head office in Lancashire, UK, and bases in Georgia, USA, and Bengaluru, India. Our products are used in safety critical applications for a wide range of markets. With sectors including oil & gas, civil engineering, aerospace, transport, utilities, marine/offshore and the military – there's no room for error. That's why we do everything with the utmost care and precision. We design and manufacture to the highest specifications and test to destruction. If our products don't meet and exceed the most stringent national and international standards, they're not good enough for our customers. At Slingco, our goal is to create innovative high-quality products that our customers can depend on, whilst providing a positive experience for our customers and our employees. Every aspect of our work, culture and commitment to innovation is driven by our core values. Salary Dependent on Experience 30 days' annual leave including Bank Holidays, rising to 35 with service Option to buy 5 additional holidays Your birthday off Hybrid working options Enhanced employer pension contribution Life assurance cover x4 salary Gym membership Cycle to work scheme Employee loan scheme Employee Assistance Programme (EAP) The NPD Project Manager is responsible for leading Slingco's new product development projects from approved concept through to successful production launch. Working within the NPD programme, the role coordinates cross-functional teams across Engineering, Operations, Quality, Procurement and Commercial to deliver products to the agreed scope, quality, cost and timescale. A central part of the role is applying a strong manufacturing and engineering background to ensure new products are designed for efficient, repeatable manufacture and are launched smoothly into production. Take ownership of assigned NPD projects from approval through to launch, working with the Product team to translate customer and market requirements into a clear project scope and product specification Lead projects through each stage of the Slingco stage-gate process, including: Building and maintaining integrated project plans, timelines and critical path Defining and controlling project budgets, capital investment and forecast spend Preparing gate review packs and project updates for the Programme Director and steering group Managing risk, issue, change and decision logs, including DFMEA and PFMEA actions Coordinating design verification, validation testing and product certification Lead cross-functional project teams across Engineering, Quality, Procurement, Operations, Sales and Marketing, setting clear priorities and holding owners to account for delivery Manage industrialisation with Manufacturing Engineering and suppliers, including tooling, fixtures, first article inspection, PPAP and production trials Drive design for manufacture and assembly (DFM/DFA), value engineering and cost-down activity to achieve target product cost and margin Maintain a sound technical understanding of Slingco products, their manufacturing processes and their end-use applications Lead structured root-cause problem solving (8D, 5 Whys, Ishikawa) on technical, quality and supply issues arising during development, launch and early production Act as the main point of contact for project status, providing clear, regular reporting to stakeholders and the senior leadership team Ensure a smooth handover of launched products into business-as-usual operations, including post-launch reviews and lessons learned Ensure new products meet all applicable product standards, regulatory requirements and customer specifications Ensure technical files, drawings, BOMs, work instructions and operation and maintenance manuals are complete, controlled and released before launch Uphold the company's quality management system and health, safety and environmental requirements throughout the project lifecycle Coordinate launch readiness, including product training materials for internal teams, distributors and end users Support the Sales and Marketing teams with launch planning, product training and customer presentations Attend customer visits, supplier visits and trade shows as required. Required Technical Knowledge Excellent planning and organisational skills, with the ability to manage multiple concurrent projects and competing priorities Proficient in project management software (MS Project, Smartsheet or similar) Proficient using MS Office software, particularly Excel and PowerPoint Strong leadership, influencing and stakeholder management skills, with excellent written and verbal communication at all levels Self-starter, motivated, able to prioritise workload, and capable of working with limited direction Ability to work hands-on with engineering, production and suppliers on the shop floor to resolve issues quickly Familiarity with CAD (Autodesk Inventor or similar) and ERP/PLM systems (desirable) Experience managing new product development projects in a manufacturing or engineering environment, with a record of delivering products to market on time and on budget Proven experience applying a formal stage-gate or phase-gate NPD/NPI process in a manufacturing environment, from concept through to production launch Strong understanding of manufacturing processes and how design decisions affect cost, quality and lead time Practical application of APQP tools - DFMEA/PFMEA, control plans, PPAP / first article inspection and design verification planning Sound commercial and financial awareness: project budgeting, capital expenditure, product costing, business cases and return on investment Working knowledge and demonstrated experience applying PRINCE2, APM or PMP - recognised project management frameworks and methodologies Formal project management qualification (PRINCE2, APM PMQ or PMP) Degree (BEng/BSc) in Mechanical, Manufacturing or Electrical Engineering, or a related discipline, desired. Candidates with equivalent experience in an engineering or manufacturing environment will be considered in lieu of the degree Familiarity with UKCA / CE marking and relevant product standards (e.g. BS EN, IEC, ASTM) for engineered products Familiarity with ISO 9001 - Quality management systems, including design and development controls Familiarity with APQP / PPAP - Advanced Product Quality Planning and Production Part Approval Process, or an equivalent new-product quality planning methodology Lean / Six Sigma training #J-18808-Ljbffr

My client is looking for an experienced Vehicle Technician, 4+ years workshop experience, Level 3 qualified with proof of qualification & a Full UK driving license Vehicle Technician - Blackburn Salary – Up to £37,000 Basic + Bonus + Overtime OTE 48k DOE & Qualifications Days – Monday – Friday, 8:30am – 5pm, Saturdays on a rota Ref – 31544 We have a new job vacancy available for a Vehicle Technician in Blackburn. My client is one of the UK's leading main dealer groups in the area and they're looking for an experienced Vehicle Technician wanting to join a great team! This is a great opportunity for a Vehicle Technician looking to work for and alongside one of the best in the industry, so if you're currently on the lookout then apply now! Vehicle Technician Benefits: Excellent Bonus Opportunities In house training opportunities for career progression Life assurance provided Tool insurance provided Great pension scheme Company Discounts Vehicle Technician Role: Carry out servicing and maintenance of all vehicles Electrical, mechanical, and hydraulic fault diagnosis and repair, this work may include warranty approved work in line with our brand parameters Department of Transport (MOT) testing duties (if qualified) Vehicle Technician Requirements: Full UK driving license NVQ, IMI, City & Guilds or Mechanical Engineering level 3 (or equivalent). We will also consider a level 2 if you have main dealership experience MOT License is beneficial but not essential Octane Recruitment Consultant – Al-amin Abiru AAVT Octane Recruitment is a specialist Automotive and Motor Trade recruitment agency, working with main dealerships, bodyshops, tyre management companies, parts distribution TPBN1_UKTJ

Flex is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world. A career at Flex offers the opportunity to make a difference and invest in your growth in a respectful, inclusive, and collaborative environment. If you are excited about a role but don't meet every bullet point, we encourage you to apply and join us to create the extraordinary. Job Summary Flex intends to spin off its Cloud and Power Infrastructure segment into a new, independent publicly traded company, Axiom, with the spin planned for Q1 2027. If the intended spin occurs, this role will support Axiom, a company focused on critical digital infrastructure and delivering end-to-end power and thermal management solutions for AI data centers and other mission-critical applications. We are looking for a new Project Manager employee to be based in either Blackburn or Kendal . Reporting to the Head of Projects (Modular) EMEA , this role is responsible for delivering Modular projects safely, on time, within budget, and to the required quality standards. The role leads projects through the full lifecycle from design and manufacture through FAT, logistics, delivery, and site integration, while ensuring commercial performance and customer satisfaction. What a typical day looks like: Manage multiple high-value Modular projects, taking full ownership for delivery to scope, schedule, cost, quality, and safety requirements. Lead delivery across the full Modular project lifecycle, including design, manufacture, FAT, logistics, delivery sequencing, and site integration. Own project commercial performance, including cost control, profitability, variations, invoicing, final accounts, forecasting, and financial reporting. Coordinate cross-functional teams across engineering, manufacturing, logistics, and site operations to ensure delivery alignment. Control, monitor, and report project performance, implementing interventions where required to achieve project objectives. Manage project risks, issues, dependencies, and change control processes, ensuring timely escalation and mitigation. Build and maintain effective relationships with customers, internal stakeholders, and third-party partners. Ensure project documentation is complete, accurate, current, and stored appropriately. Provide accurate project reporting and forecasting in line with business governance requirements. Promote continuous improvement through lessons learned and the adoption of best practices. Support and mentor project team members where required to drive consistent delivery standards. The experience we're looking to add to our team: Proven experience delivering complex Modular, skid-based, switchgear, busbar, or power distribution projects. Demonstrated ability to manage multiple concurrent, high-value projects and diverse stakeholders. Strong commercial and financial awareness, including profitability management, cost control, and variation management. Experience working across engineering, manufacturing, factory delivery, and site execution environments. Strong stakeholder management skills with the ability to build relationships at all levels, including senior customer stakeholders. Proficient in project management and reporting tools, including Microsoft Office and Smartsheet. Excellent organisational, communication, and reporting skills. Self-motivated, enthusiastic, and able to work effectively in fast-paced, pressurised environments. Strong attention to detail, decision-making capability, and ability to work with high levels of autonomy and accountability. Full clean driving licence and eligibility to work in the UK, passport and flexibility to also travel abroad. Desirable: Project Management certification (APMP, PRINCE2, or equivalent) Understanding of electrical principles and power distribution/generation systems What you'll receive for the great work you provide: An environment where you will feel fulfilled by your work, valued for your contribution, and celebrated for your success; Opportunities to learn new skills in a fast-paced industry; A competitive salary and benefits package that includes: A merit-based annual pay review Enhanced annual leave Employee recognition scheme and long service awards Referral bonus Volunteer days Group Life Insurance, including a death in service payment and access to a virtual GP service 24/7 365 days a year Sick pay scheme Cycle to Work scheme Enhanced maternity/paternity leave Blackburn or Kendal /Hybrid Work based on your Job Function. Being able to travel occasionally is essential; Travel opportunities (role dependent); Support in your well-being by access to: Employee Assistance Programme offering free access to qualified counsellors and expert advice On-site trained Mental Health First Aiders Access to various discount programs (including food, activities, gym memberships etc.) Location: Blackburn / Kendal TK43 Job Category Operations Required Skills: Optional Skills: Flex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first). TPBN1_UKTJ

Panel Builder Nuneaton £15.50 per hour Overtime: Time & a half 40 hours per week Permanent Monday–Friday Panel Builder We are recruiting for a Panel Builder to join an established engineering and automation business in Nuneaton. This is a hands-on workshop role building and wiring electrical control panels from schematics and engineering drawings. What You Need Previous Panel Builder / Panel Wiring experience Confident reading electrical schematics Experience with electrical assembly and cable termination Good practical skills with hand and power tools Strong attention to detail Relevant qualification, apprenticeship or industry experience ECS Gold Card desirable PLC/automation experience advantageous The Role As a Panel Builder, you will: Build and wire electrical control panels Work from schematics and engineering drawings Install PLCs, relays, contactors, VFDs and terminal blocks Prepare enclosures by cutting, drilling and punching Route and terminate cables Carry out crimping and ferruling Label cables and components Complete job documentation Work alongside engineers Maintain high quality and safety standards What's On Offer? £15.50 per hour £32,240 annual salary Overtime at time & a half 40-hour week Permanent Panel Builder position Monday–Friday Training and development Varied automation projects Career progression If you're an experienced Panel Builder looking for your next opportunity in Nuneaton, apply today. Panel Builder Nuneaton £15.50ph overtime TPBN1_UKTJ

Senior Quantity Surveyor Would you like to be part of Vital Energi's 5-Year Strategy of Growth? If so, due to our continuing success, we are experiencing rapid and extensive growth across all business sectors and are looking to recruit a Senior Quantity Surveyor with a successful background in construction. You will join our Commercial team, supporting a variety of projects across the North West. You will support the financial management of contracts in partnership with the Contracts Managers and/or Project Managers. What You Will Be Doing Work in partnership with site management, providing commercial support as required to develop a proactive site team and ensure contractual obligations are identified and administered. Vet contract documentation upon receipt from the client to ensure compatibility with the Company's tender submission and subsequent negotiations. Produce a Commercial Risk Register for each contract, monitoring risk and assisting in the implementation of agreed mitigation measures. Prepare and issue enquiries for major plant, equipment and subcontract packages. Commercially evaluate quotations, negotiate pricing and terms with vendors, and issue resultant purchase orders. Prepare and submit applications for payment and/or invoices, obtain payment certificates and progress client payments in accordance with contractual provisions. Measure, submit and agree variations, loss and expense claims, and/or compensation events in accordance with contractual provisions to facilitate the prompt agreement of final accounts. Monitor on-site record keeping and prepare and issue notices in accordance with contractual provisions. Prepare and submit monthly Cost Value Reconciliations (CVRs) and Cash/Spend Profiles. Attend Contract Review Meetings. Authorise and code suppliers' and subcontractors' invoices and submit them to Finance for payment. Measure, certify and agree subcontractors' interim valuations and final accounts. Prepare and issue contractual notices to subcontractors. Who We Are Looking For A Senior Quantity Surveyor with a successful track record in the construction industry. Educated to BSc level in Quantity Surveying (or another equivalent commercially related discipline). A strong understanding of NEC3 and NEC4 Contracts, including Options A, B, C, D and E, with predominantly Option A experience. Membership of a relevant professional institution (e.g. MRICS or equivalent). Knowledge and practical experience within the construction and/or mechanical and electrical (M&E) sectors. Strong commercial awareness and business acumen. Full UK driving licence. The Package Attractive salary. Company car or car allowance. Pension scheme. Employee Assistance Programme (EAP). 25 days' annual leave plus 8 bank holidays, increasing with length of service. Free onsite gym. Cycle to Work scheme and additional employee benefits. Additional Information Applications will be processed within 28 days of receipt. If you have not heard from us within this period, your application has unfortunately been unsuccessful. Thank you for your interest in Vital Energi. The Company is opposed to all forms of discrimination and will select for employment, training and promotion based solely on suitability for the role and/or merit. It is Company policy that no job applicant or employee receives less favourable treatment on the grounds of sex, race, colour, age, ethnic or national origin, political affiliation, religious belief, marital status, or physical disability, nor is disadvantaged by any unjustifiable conditions or requirements. Applicants must have the unrestricted and ongoing right to work in the UK for the duration of employment without the need for sponsorship. Due to the nature of this role, we are unable to support visa sponsorship or employ individuals with time-limited permission or restrictions attached to their right to work in the UK. Notice to Agency and Search Firm Representatives Vital Energi Utilities Ltd does not accept unsolicited CVs from agencies and/or search firms for this vacancy. CVs submitted to any employee of Vital Energi Utilities Ltd by a third-party agency or search firm without a valid written and signed search agreement will become the sole property of Vital Energi Utilities Ltd. No fee will be paid should a candidate be hired as a result of an unsolicited agency or search firm referral. Thank you. TPBN1_UKTJ

Project Manager Electrical Testing Inspection and Certification Location: Lancashire Travel required: 75% of time Position type: Full time Reports to: Division Lead car allowance £5000pa The Project Manager – TIC Electrical is responsible for planning, coordinating, and delivering all electrical Testing, Inspection, and Certification (TIC) projects within the division, ensuring compliance with industry standards, client requirements, and company objectives. This role provides departmental leadership, managing a team of electrical engineers and technicians, and acting as the key point of accountability for project execution, resource allocation, and client communication. Unlike a traditional operations role, this position is project-focused, requiring strong organizational skills, technical expertise, and leadership capability to ensure projects are delivered on time, within budget, and to the highest quality standards. The Project Manager also drives continuous improvement, ensures accurate reporting, and maintains governance over safety, compliance, and data integrity within CRM (Customer Relationship Management) and HRIS (Human Resources Information System) platforms. A critical aspect of this role is ensuring that all TIC Electrical activities adhere to ISO standards, including ISO 9001 (Quality Management), ISO 14001 (Environmental Management), and ISO 45001 (Occupational Health & Safety), embedding best practices and maintaining certification compliance across all projects. • Develop detailed project plans for all TIC Electrical activities, including timelines, resource allocation, and budget control., • Coordinate with internal teams and clients to ensure project requirements are clearly defined and met., • Monitor project progress, resolve issues, and implement corrective actions to maintain delivery schedules., • Lead and manage the TIC Electrical team, providing guidance, support, and performance oversight., • Allocate resources effectively across multiple projects to optimize productivity and efficiency., • Conduct regular team briefings and ensure alignment with project objectives., • Ensure all electrical TIC projects comply with statutory regulations, industry standards, and client specifications., • Maintain governance over health and safety practices, including confined space and electrical safety protocols., • Embed ISO standards (ISO 9001, ISO 14001, ISO 45001) into project delivery processes and documentation., • Prepare for and support internal and external audits to maintain ISO certification., • Maintain accurate project data within CRM systems for client communication, forecasting, and reporting., • Ensure workforce compliance and training records are up to date in HRIS., • Prepare detailed project reports for senior leadership, including KPIs, financial performance, and risk assessments., • Act as the primary point of contact for clients on all TIC Electrical projects., • Communicate project updates, resolve queries, and ensure client satisfaction throughout the project lifecycle., • Identify opportunities to improve project delivery processes and reduce operational costs., • Implement best practices and innovative solutions to enhance efficiency and quality., • Project Delivery: 95% of TIC Electrical projects completed on time and within budget., • ISO Compliance: 100% adherence to ISO 9001 (Quality Management), ISO 14001 (Environmental Management), and ISO 45001 (Occupational Health & Safety) standards across all projects., • Audit Performance: Achieve a minimum of 95% compliance score in internal and external audits related to ISO standards., • Data Accuracy: 100% compliance with CRM and HRIS data entry standards for project and workforce information., • Client Satisfaction: Maintain or improve client satisfaction scores through consistent communication and quality delivery., • Team Performance: Achievement of productivity and quality targets across all TIC Electrical projects., • Complex Project Coordination: Managing multiple TIC Electrical projects simultaneously requires strong organisational and leadership skills., • ISO Governance: Maintaining compliance with ISO standards presents both a challenge and an opportunity to embed best practices and strengthen operational excellence., • Data Integrity: Ensuring accurate CRM and HRIS data is critical for forecasting and compliance, offering scope for process improvement., • Client Engagement: Building strong relationships with clients provides opportunities for repeat business and long-term partnerships., • Innovation: Driving efficiency and adopting new technologies in TIC Electrical operations can deliver significant competitive advantage. The above list of duties is non-exhaustive and additional duties may be requested by your line manager. Forward Assist Recruitment is an Equal Opportunities employer; we welcome applicants from all backgrounds #J-18808-Ljbffr

Vital Energi are at the forefront of the UK's low carbon energy generating systems of the future. We essentially work in the construction industry, in a rapidly expanding market for Heat and Power Solutions from renewable energy. As a leading turnkey engineering contractor, we design, install, operate and maintain environmentally friendly energy generating systems and networks. Due to Vital Energi's continued growth, we require an Senior level / experienced Architectural Technologist based at our Head Office in Blackburn, to work in this exciting and growing sector of the industry. Reporting to the CSA Lead and Architectural Development Manager, you will lead the technical design of energy centres and renewable energy schemes (Heat Pumps/Solar) from concept to completion. • Design & Delivery: Produce detailed tender and construction drawings, conduct site surveys, and ensure building regulation compliance., • Technical Leadership: Integrate high-performance energy solutions and coordinate with civil and structural teams., • Team Management: Mentor and manage Graduate ATs/Technicians, overseeing workload allocation, quality assurance, and project timelines., • Lead the design and development of distributed energy schemes, energy centres, Air Source heat pump external compounds, Solar farm and aspects of retrofits/ modifications to existing structures and client owned assets., • Lead the development of detailed construction drawings, technical specifications and tender documentation., • Resolve, monitor where appropriate site queries to progress both design and site development., • Lead the preparation of technical specifications (NBS), • Have an awareness of cost implications within design., • Liaising with external designers, customers and Vital Energi's in‑house project teams and integrate their requirements into the working drawings packages., • Procure/ produce architectural detailing where non-standard – fire stopping, waterproofing and gas protection as listed examples., • Compliance with CDM requirements and our in in‑house design processes., • Ensuring compliance with legislation and best practice with company procedures., • Act as a technical mentor to junior team members. Providing training and quality assurance to work produced., • Co‑ordinate with Architects Engineers, Contractors and 3rd party consultants to ensure seamless project execution., • Lead client meetings, site inspections and contractor workshops, addressing technical queries raised by individuals., • Ensure project timelines and budgets are met while maintaining high standard of quality., • Conduct technical reviews to ensure designs meet statutory requirements, building codes and best practice, • Lead Building Regulation approval, and preparation of applications, • Lead Planning Application approval and preparation of applications, • Oversee on site technical problem solving, liaising with construction teams to resolve any issues efficiently., • Ensure all healthy and safety standard are integrated into design and construction processes. The successful candidates will ideally be qualified at Degree level with a minimum of circa 5 to 7 years’ experience in a design/ design build environment. The following attributes are essential for the role: • Strong affiliation to the Chartered Institute of Architectural Technologists whilst holding valid MCIAT accreditation., • A strong understanding of current Building Regulations., • A strong understanding of local planning policies, • A good understanding with knowledge associated with renewable technologies., • A familiarity of National Design Specifications (NES/NBS), • Experience in preparing both Planning and Building Regulation applications, • Experience of liaising with Local Authorities and other Statutory Bodies throughout project durations., • Experience/ competence of being effective communicators, who are confident and focused, with the ability to manage their time and duties in a professional and effective way., • Proven ability to lead projects from concept to completion in a fast‑paced environment., • Excellent written and verbal communication skills, with experience in client and stake holder engagement., • Be fluent with the RIBA Plan of Work and relevant design standards and stages., • Have good knowledge of forms of contract used within the construction industry. The following attributes would be considered advantageous, although not essential to the role as training and/or support will be provided: • Experience working on highly sustainable or net zero carbon projects, • Experience in the use of 3D drafting software (Sketch Up & REVIT), • Experience in the design and build sector, • Competent knowledge of steel and/or concrete structures, • Competent knowledge of mechanical and/or electrical services, • Knowledge of renewable energy technologies and their application in building design The successful candidate will join a small team of construction professionals and will work on a variety of projects that may all be running concurrently. The role would suit a dynamic, recently qualified and experienced Architectural Technologist who wishes to broaden their skill range in an exciting and fast-moving sector of the construction industry. • Salary negotiable DOE, • Company Car, • Contributory Company Pension Scheme, • Non‑contributory death-in-service insurance, • Employee Assistance Programme, • 25 Days Holiday plus 8 days bank holidays., • Additional holidays awarded in line with length of service, • Option to purchase/sell additional holidays, • Onsite gym/wellbeing centre at our Blackburn Head Office, • Discounted gym membership across the UK, • EV charging points where possible Applications will be processed within 28 days of receipt. If you have not heard from us within this period it will mean that your application has unfortunately been unsuccessful. The company is opposed to all forms of discrimination and will select for employment, training and promotion on the basis of suitability for the job and/ or merit. It is company policy that no job applicant or employee receives less favourable treatment than another on the grounds of sex, race, colour, age, ethnic or national origins, political affiliations, religious beliefs, marital status, physical disability or is disadvantaged by unjustifiable conditions or requirements. Applicants must have the unrestricted and ongoing right to work in the UK for the duration of employment, without the need for sponsorship. Due to the nature of this role, we are unable to support visa sponsorship or employ individuals with time‑limited permission or conditions attached to their right to work in the UK Vital Energi Utilities Ltd is not accepting unsolicited CVs from agencies and/or search firms for this job posting. CVs submitted to any Vital Energi Utilities Ltd employee by a third party agency and/or search firm without a valid written & signed search agreement, will become the sole property of Vital Energi Utilities Ltd. No fee will be paid if a candidate is hired for this position as a result of an unsolicited agency or search firm referral. Thank you #J-18808-Ljbffr

Assystem is a global leader committed to accelerating the energy transition. With 7,500 employees across 12 countries, we tackle the monumental task of switching to low-carbon energy. Our 55+ years of experience in highly regulated sectors ensure we deliver top-notch engineering, project management, and digital solutions. Join the Fusion and Modular Nuclear Business Unit! • Develop Technical Programmes: Create and manage EC&I technical programmes covering the entire product lifecycle., • Detailed Task Planning: Plan tasks meticulously, accounting for dependencies from other areas., • Ensure Work Integration: Foster seamless collaboration across work areas to deliver integrated solutions., • Scope Management: Monitor tasks closely and implement protocols to adjust programme scopes as needed., • Resource Alignment: Identify resource gaps and assist the Chief Design Engineer (CDE) in crafting resourcing strategies., • Budget Development: Help establish and maintain budgets for EC&I programmes., • Financial Oversight: Track work pack budgets, forecast, and monitor actual costs versus projections., • Risk Monitoring: Manage programme risks, including both threats and opportunities., • Contract Staff Management: Oversee and optimize resource allocation for contract staff., • Over 55 years in nuclear engineering., • Ranked among the top 3 largest nuclear engineering companies., • Attractive social benefits, including an engaging Employee Committee and holiday bonuses., • Ongoing training with numerous career opportunities., • 70% of our managers are promoted internally!, • Hybrid work: 1-2 days remote per week., • Experience: in EC&I design and management, with expertise in two areas (e.g., Control Systems, Radiometrics, Functional Safety)., • Industry Knowledge: Familiarity with highly regulated industries, control systems, design phases, configuration management, and life cycle stages., • Leadership Skills: Proven abilities in leading teams, managing project complexities, and driving continuous improvement., • Qualifications: Degree (or equivalent) in Electrical, Instrumentation, or Control Engineering; advanced degrees are a plus. We are committed to equal treatment of candidates and promote, as well as foster all forms of diversity within our company. We believe that bringing together people with different backgrounds and perspectives is essential for creating innovative and impactful solutions. Skills, talent, and our people’s ability to dare are the only things that matter !. Bring your unique contributions and help us shape the future. #J-18808-Ljbffr

Morson Edge seeks a Senior Electrical Design Engineer to lead detailed electrical system design for aerospace projects at client site in Samlesbury, Lancashire. You will drive documentation, reviews and compliance with industry standards. Ideal candidates bring 5+ years in aerospace electrical design, strong CAD skills, and ability to mentor junior engineers within multidisciplinary teams. This is a contract, full-time role with occasional extra hours to meet deadlines. #J-18808-Ljbffr

Join Our Team as an Offsite Standardisation Manager! Location: Leeds (Open to other locations) Salary: Competitive + Car Allowance + Flexible Benefits Are you ready to take the lead in shaping the future of offsite manufacturing? We're looking for an Offsite Standardisation Manager with an electrical/mechanical bias to join our dynamic team. In this pivotal role, you will spearhead the development, implementation, and adoption of standardised offsite (OSM) products across our business. Your mission will be to collaborate with various teams-central technical, offsite manufacturing, design, estimating, and project delivery to ensure that our standardised solutions are not only developed but also embedded in designs and consistently delivered on-site. • Health and Safety Leadership: Champion a safety-first culture in all activities., • Product Development: Identify and continuously improve standardised offsite products in collaboration with project teams., • Strategic Alignment: Ensure products align with business strategy and sector needs, establishing a structured product roadmap., • Design Collaboration: Work with internal and external designers to incorporate standardised products into designs., • Innovative Thinking: Challenge traditional design approaches and promote design for manufacture and assembly (DFMA) principles., • BIM Coordination: Collaborate with the BIM team to maintain standardised products within the Revit library., • Tender Solutions: Ensure standardised products are included in tender solutions and cost models., • Project Support: Assist project teams in adopting standardised products and addressing implementation barriers., • Feedback Loop: Capture learnings and identify opportunities to expand the product suite., • Market Awareness: Monitor industry trends and emerging technologies to enhance our offerings., • Stakeholder Engagement: Build strong relationships with stakeholders to support product development and adoption., • Central Point of Contact: Facilitate communication and resolve challenges related to offsite standardisation. Extensive experience in mechanical/electrical building services projects. Background in offsite manufacturing, DFMA, or standardisation within construction/MEP. Strong communication skills with a proven ability to drive change and influence stakeholders. Experience with BIM processes and digital engineering (Revit libraries, data structures). Solid understanding of construction methodologies, costing, and programme impacts. Experience in developing repeatable products or standard solutions. I. Eng, MCIBSE, MIET, B. Eng (Hons) or equivalent. • Car/Car allowance, • Salary sacrifice car scheme (Hybrid/Electric Vehicle), • Pension with up to 8% employer contribution, • Personal Wellbeing and Volunteer Days, • Private Medical Insurance, • 24/7 Employee Assistance Program for mental health support, • Flexible benefits including Dental Insurance, Gym Memberships, and more, • Personal development programme to support your growth At our company, we're on a journey to foster a culture of inclusion, fairness, and respect. We're dedicated to making the recruitment process transparent and accommodating. If you need any adjustments to participate in the application or interview process, just let us know—we're here to help! As one of the leading independent engineering and services businesses in the UK, we take pride in our rich history since 1921. With a turnover of £500m and a team of 3000 employees, we're committed to developing great people through our investment in training. We work across various sectors within the building and infrastructure industry, tackling groundbreaking projects with innovative solutions using the latest tools and technologies. When you join us, you'll have a clearly defined development path, supported by regular reviews and ongoing training to help you reach your full potential. #J-18808-Ljbffr

We are innovative That's why we need people like you to help us. People who enjoy finding new ways to do things … We are currently seeking a Contractor Competency Authorising Officer (CCAO) to join our dynamic Energy team. This permanent role involves ensuring the competency of contractor personnel within the electrical distribution field, specifically for SSEN works ranging from 11kV to 132kV. Here are some of the activities you'll be involved with… • Assessing individuals against defined competency criteria, including technical knowledge, experience, and understanding of Distribution Safety Rules., • Conducting structured assessments using interviews, scenario questioning, and evidence review., • Verifying candidate evidence such as training records, authorisations, logbooks, and experience records., • Producing and signing a Contractor Competence Assurance Statement for each candidate., • Maintaining contractor competency matrices and role profiles, ensuring reassessment where necessary., • Operating independently from programme and commercial pressures to ensure consistency and fairness in competence decisions., • Maintaining strong communication and collaboration with SSEN Authorising Officers, Operational Safety teams, and Project & Delivery Managers. We'd love to hear from you if you can demonstrate… • Significant experience working in UK electricity distribution networks., • Strong understanding of Distribution Safety Rules, Permit to Work systems, and HV/EHV operational protocols., • Experience in roles such as Senior Authorised Person (SAP), Authorising Officer, Electrical Safety Manager, or Commissioning Manager/Lead Engineer., • Recognised electrical qualification or equivalent industry route., • Full UK Driving licence., • High Voltage (HV) operational experience appropriate to distribution environments., • Previous SSEN authorisation (current or historical)., • Experience conducting formal competence assessments or audits., • Involvement in large capital delivery or complex outage programmes., • Familiarity with contractor assurance models under DNO governance. Every day we work smarter, greener and use our imaginations. Our purpose at Clancy is simple - we make life better for everyone's growing families. We play a vital role in providing fresh drinking water and power to millions of homes and businesses and so much more. We are one of the biggest family owned construction businesses in the UK and we care about our people, our clients and the environment. In addition to helping you reach your career goals, a competitive salary, pension, healthcare and holiday allowance starting at 24-26 days per annum, we also offer perks including Clancy Xtras, our employee benefits programme with discounts for numerous well-known retailers such as Tesco, Sainsbury's, Currys PC World and Vue Cinemas, cycle to work scheme as well as an Employee Assistance Programme. • competitive salary, pension, healthcare and holiday allowance starting at 24-26 days per annum, • Clancy Xtras, • our employee benefits programme with discounts for numerous well-known retailers such as Tesco, Sainsbury's, Currys PC World and Vue Cinemas, • cycle to work scheme, • Employee Assistance Programme Clancy is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all our employees. If you require any reasonable adjustments to be made for you to attend an interview, please do let us know and we will be happy to accommodate. We are proud signatories of the Armed Forces Covenant and Disability Confident Committed #J-18808-Ljbffr

We have a unique opportunity for an experienced Electrical Supervisor to join the team on the HARP Project. HARP is a critical infrastructure project supporting the water supply to millions of people in the North West. STRABAG - Work On Progress • ECS Gold Card., • Full HV authorisation up to 33KV, • An accepted City & Guilds Apprenticeship or equivalent professional electrical qualification or HNC, HND or Eng Tech in Electrical Engineering., • HV switching course., • 18th Edition Wiring regulations, amendment 3., • SSSTS., • Previous experience as an electrician in construction., • Experience/knowledge of working on a major project., • Highly experienced in EPB/Open/Slurry TBM tunnel drives and SCL works; minimum 5 years, with at least 2 years as Supervisor In depth knowledge of industry regulations for, construction and testing and commissioning of tunnelling electrical equipment and services (e.g. BS 6164 and Electrical Regulations)., • Safety critical role overseeing all Electrical, Surface, Tunnels and Shaft works services and then tunnel construction works., • Compliance with Strabag (UK) systems of works., • Oversee all the Electrical personnel and electrical plant and distribution and associated activities., • Electrical Supervisor will initially be the undertaking the following activities; Equipment work package specifications & procurement / electrical services specifications & single line drawings / site set-up / TBM assembly (inc FAT/SAT/Commissioning) / TBM operation and maintenance / surface and tunnel conveyor (assembly/commissioning/operation) / Grout Batching plant / Water treatment plants / cooling water plants / Gantry cranes / MSVs / hyperbaric systems / surface & tunnel HV/LV distribution / lighting systems / communication systems. Surface and sub-surface sub-distribution, including all equipment associated with SCL cavern construction, ground freezing, de-watering wells., • Produce and implement the Electrical Operating Safety Procedures, including; Safe Systems of Work (SSOW), Risk Assessments & Method Statements (RAMS), Task Briefings., • HV/LV (up to 20kV) SAP; with experience of managing / appointing AP9s., • Produce weekly / monthly progress and look-ahead reports., • Overseeing the Electrical operations to ensure the key roles are staffed with people that are competent and can effectively and safely undertake their roles on the project., • Develop innovative systems and processes to ensure maximum availability of equipment and safe systems of work at all times., • Coordinate electrical distribution requirements across all shaft / tunnel construction sites., • Implement a planned preventative maintenance scheme and oversee the spare parts management., • Maintain all records of inspections and maintenance (planned & unplanned). Other Responsibilities • Close liaison with the immediate tunnel construction team on requirements and programme., • Close liaison with wider Plant team working across all areas of HARP on requirements and programme., • Close liaison with the HARP Safety team., • Close liaison with Planning teams., • Actively participate in installations, troubleshooting, and wiring tasks while supervising the team., • Ability to interpret complex electrical drawings., • Promoting and monitoring the roll out and implementation of Strabag (UK) values and behaviours. Pre-employment screening is required for this position. More information on our career website . This happens after the successful application 1. Screening of applications – careful review and evaluation of submitted documents, 2. Decision, whether to invite an applicant to an interview, 3. Getting to know the candidate in a virtual or personal setting – the number of interviews may vary depending on the position, 4. Welcome to STRABAG SE– clarifying the offer and the final details regarding the candidate’s entry At STRABAG around 89,000 people working on progress at more than 2,400 locations worldwide. Uniqueness and individual strengths characterise both our projects and each of us as individuals. Whether its building construction, civil engineering, road construction, underground engineering, bridge building, tunnelling, construction material production, project development or building management – we are always one step ahead so that we can become the most innovative and sustainable construction technology company in Europe. Diversity, inclusion and equal opportunities are integral to this, who we are as a company and how we work. Together we work as partners to complete projects successfully and grow with new challenges. Together we achieve great things. Let’s progress! #J-18808-Ljbffr

We are working with a leader in mechanical, electrical and public health engineering solutions, delivering innovative designs and advanced technologies across various industries. Our focus is on MEP design in the construction industry for predominantly residential and commercial projects. We specialist in RIBA Stage 4 & 5 Construction projects, with a commitment to engineering excellence. This is a full-time working from home role for a Principal or Senior Electrical Engineer based in a location with the ability to get to Greater London to site are required when necessary. The Principal Electrical Engineer will lead engineering projects, design and analyze electrical systems using advanced software tools, and oversee a team of revit engineers. Responsibilities also include managing project timelines and collaborating across project design teams to ensure the successful completion of project objectives. • Strong expertise in Electrical Engineering and Design., • Proficiency in Computer-Aided Design (CAD) and/or reviewing models in Navis Works., • Proven ability in Project Management, including planning, execution, and team leadership., • Excellent problem-solving and analytical skills., • Excellent written english and verbal communication abilities., • Master's or Bachelor's degree in Electrical/ Electronics Engineering., • Prior experience in a leadership role within the building services sector., • Proven ability and knowledge on high riser residential buildings. Eden Brown is committed to equality in the workplace and is an equal opportunity employer. Eden Brown is acting as an Employment Business in relation to this vacancy. #J-18808-Ljbffr

Location: Samlesbury, Lancashire, North West England Job Type: Contract, Full-Time hours Primary Industry: Aerospace and Aviation Secondary Industry: Engineering Salary: £35.00 - £47.12 per hour As a Senior Electrical Design Engineer, you are responsible for leading the design and development of electrical systems and components within aerospace projects. You apply advanced engineering principles to produce detailed designs, ensuring compliance with industry standards and client requirements. You collaborate closely with multidisciplinary teams to deliver innovative solutions that meet technical, regulatory and operational demands. • Develop and produce detailed electrical design documentation, including schematics, wiring diagrams, and system architecture., • Lead design reviews and provide technical guidance to junior engineers and design teams., • Ensure all electrical designs comply with relevant aerospace standards, safety regulations and quality assurance protocols., • Conduct feasibility studies, risk assessments and failure mode analyses for electrical systems., • Collaborate with systems engineers, mechanical engineers and project managers to integrate electrical designs within overall project frameworks., • Support the preparation of technical proposals, cost estimations and project schedules., • Identify and implement design improvements to enhance system performance, reliability and maintainability., • Participate in testing and validation activities to verify design integrity and functionality., • Maintain up-to-date knowledge of emerging technologies, industry trends and best practises relevant to aerospace electrical engineering., • Degree in Electrical Engineering or a closely related discipline from a recognised institution., • Professional Engineering registration or working towards registration is desirable., • Bachelor's degree in Electrical Engineering or equivalent qualification., • Postgraduate qualifications in aerospace engineering or related fields are advantageous but not essential., • Minimum of five years' experience in electrical design engineering within the aerospace or aviation sectors., • Proven experience producing complex electrical system designs and documentation., • Experience working on projects involving aircraft electrical systems, wiring harnesses and avionics is preferred., • Previous involvement in contract-based engineering roles is advantageous., • In-depth knowledge of aerospace electrical standards and regulations, including electrical safety and certification requirements., • Strong proficiency in electrical design tools, such as CAD software and schematic capture applications., • Excellent analytical and problem-solving skills with attention to detail., • Ability to communicate complex technical information clearly and effectively, both verbally and in writing., • Strong organisational skills with the ability to manage multiple tasks and meet deadlines., • Demonstrated leadership capability and experience in mentoring junior team members., • Chartered Engineer status or equivalent professional accreditation., • Experience with software tools specific to aerospace electrical design and simulation., • Familiarity with project management methodologies and working within Agile or similar frameworks., • Understanding of mechanical and systems engineering principles to support multidisciplinary collaboration., • Based primarily at the client's site in Samlesbury, Lancashire, with standard full-time hours expected., • Occasional requirement to work additional hours to meet project deadlines., • Work involves use of computer-based design software and participation in design review meetings., • Compliance with health and safety regulations in an engineering and aerospace environment is mandatory., • Potential for limited travel to other sites or suppliers as required by project demands. JBRP1_UKTJ #J-18808-Ljbffr