Trabajos electrical technician en BristolCrear alertas

Mobile Fleet Engineer (HGV Mechanic) Expensed Van Provided Your day starts when you start your vehicle. Are you an experienced HGV Technician looking for a mobile role where no two days are the same? We are looking for a self-motivated and independent Mobile Fleet Engineer to support a network of customer sites across the South West. You will travel to customer workshops and rural sites carrying out servicing, repairs, and maintenance across a wide range of specialist vehicles and equipment. The equipment you will work on includes: * HGVs * Ground Support Equipment (GSE) * RoRo (Roll-on Roll-off) equipment * Tractors and Tugs • Shunters, • Cherry Pickers Other specialist/ bespoke operating platforms Key Responsibilities * Attending vehicle callouts * Carrying out preventative maintenance * Responding to emergency breakdowns * Pre-arranged servicing at customer and rural sites * MOT preparation * Engine work and diagnostic investigations * Rectifying running defects * Chassis and fabrication work * Working with hydraulic and pneumatic systems * Improving vehicle standards and reliability * Electrical and wiring inspections and repairs Coverage Area You will be covering the following locations: * South Bristol * Bath * Frome * Weston-super-Mare * Glastonbury About You We are looking for someone with a strong technical background and the ability to work independently while representing the company professionally on customer sites. You should be: * Reliable and punctual * Enthusiastic and proactive * A strong problem solver with a can-do attitude * Committed to health and safety standards * Comfortable

Trainee Field Service Technician/Engineer roles available across several territories throughout the South of England Trainees £30,000 - £35,000 starting salary + Company car/van + 25 days holiday and company perks, salary increases once fully qualified with different levelling throughout the journey that could lead to £40k after 2 years Experienced Coffee Vending Machines Technicians also welcome paying £40,000 Must have a full driving licence (with less than 6 points) and been driving for at least 12 months (21 years + for insurance purposes) First class training and development and genuine progression and career path on offer here. A mechanical or electrical technical background is key otherwise full training provided in a niche market-place. Mon-Fri 42,5 working week, role is conducting 6 Service jobs daily within a 10-15 miles Your Key Duties & Responsibilities: To diagnose and repair faults on a complete range of Vending Equipment Continually review multiple fault equipment and ensure that any machine that displays persistent breakdowns is given the highest priority regarding repair. To attend various Training Courses to assist you to maintain the highest standard of workmanship. Maintain good customer relations by adopting a pleasant manner at all times. Adhere to customer procedure e.g. entry/exit from premises and Health & Safety Policies where appropriate. Maintain your company vehicle in a road worthy condition in accordance with company procedures. Ensure that your vehicle is stocked with correct parts and kept clean and tidy both inside and out. What You Bring to The Role Ability form and maintain a close working relationship with colleagues and clients with a view to providing the best possible service to our clients. Willing and able to work on your own initiative A full UK driving licence with at least 12 months driving experience and no more than 6 points is essential Be customer-focused with a smart and professional appearance. Must have strong electrical knowledge/experience – demonstrated through practical work experience or an electrical qualification. Have a technical background with strong fault finding and diagnosis skills. Be aware of how to work safely on electrical equipment.

Field Service Engineer - White Goods, LaundryBristol/Swindon/South West£36,000 - £39,000 + Bonuses, Regular Overtime (£45k+ OTE) + Full Training + Van + Door to Door + 36 days holiday + Medical Are you a service engineer from a white goods, catering or similar background looking to join an international OEM offering specialist training and regular overtime at x1.5 and x2? This is an outstanding opportunity to join a highly respected, international manufacturer of commercial laundry equipment that will fully train you on high quality technical equipment. The excellent package including bonuses, 28 days holiday + bank holidays, medical cover, regular enhanced overtime and more. The company are a global organisation with an excellent reputation and a successful track record of training and progressing their employees. This is a regional role, paid door to door, servicing, repairing and maintaining commercial laundry equipment, there is a weekend call out rota 1 in 4 weekends with additional payments and overtime rates applied. This is a great chance for a service engineer to join a rapidly expanding OEM offering excellent training, interesting and varied work in a regional service engineer position with regular overtime. George Mallett - 5018 - The Role:Servicing and repairing equipmentRegular overtime, bonuses, door to door travel and training The Candidate:Competent with basic electric testing and safety*Full Driving License Elix Sourcing Solutions is a specialist recruiter for Engineering, Manufacturing, Tech, Energy and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. Service Engineer, Mobile Engineer, Field Service, Technician, White Goods, Catering, Coffee, Dishwasher, Domestic Appliances, Glasswasher, Comcat, Commercial, Laundry, Refrigeration, Electrical, 18th, Bristol, Swindon, Bath, Weston, Clevedon,

Right Now Group are currently partnered with an International Software client and industry leader who are closely linked to the Engineering sector. They have an open vacancy within their Field Service Engineering team. If you are an experienced field-based Electrician/Technician or have previous hands-on experience/ qualifications within any of the following areas, then this would be the ideal role for you! • Vehicle Mechanics Electronics, • Re-manufacturing/Assembly, • General Maintenance/Engineering, • Facilities Maintenance Job Title: Field Service Engineer Weekly Hours: 40 hours (flexible) 5 in 7 days worked (time and a half on weekends) Salary: £32,000 - £33,000 Role Type: Full time - Permanent Location: Bristol Field Service Engineer Responsibilities • Carry out Remedial Maintenance initiated by customer requests for service as directed, • Partake in and carry out machine installations and commissioning as required, • Ensure that all Technical Documentation is kept available and up to date, • Ensure that at all times you promote the Best Practise approach to your duties, • Complete all necessary Work Dockets and Reports as part of the Service and Maintenance procedures, • Assistance in maintenance of organisational charts for customers as a basis for the Networking, • Previous experience in a Field Service Engineering or Technician role, • Mechanical/Electrical knowledge, previous experience in maintenance or some form of mechanics/electrics, • Experience in working out on the road from a van or car, • Good customer relationship skills, • Flexible approach to working hours and days, • Able to work under pressure Have good problem-solving acumen, • Able to both work independently and also as part of a team

Senior Revit TechnicianLocation: BristolOpportunity Overview An opportunity has arisen for a Senior Revit Technician to join a Building Services (MEP) team based in Bristol. This Senior Revit Technician role involves working within a multidisciplinary consultancy delivering engineering, environmental and planning services across the UK. The Senior Revit Technician will support the delivery of projects across multiple sectors including commercial, retail, industrial, residential, education, healthcare and mixed-use developments.Role Overview – Senior Revit Technician As a Senior Revit Technician, you will be responsible for producing and coordinating high-quality Revit models and technical drawings for building services systems. The Senior Revit Technician will work closely with engineers and project teams to ensure coordinated, accurate and standards-compliant models are delivered from concept through to project completion. Key responsibilities include: • Producing and coordinating detailed Revit MEP models and drawings, • Modelling mechanical, electrical and public health systems including HVAC, pipework, containment and plant layouts, • Supporting engineers in translating design intent into accurate BIM models, • Coordinating models across disciplines and resolving clashes using BIM tools, • Maintaining and applying BIM standards, templates and workflows, • Reviewing and checking models and drawings for accuracy and quality, • Supporting project coordination meetings and model reviews, • Assisting in mentoring and supporting junior techniciansSkills and Experience Required – Senior Revit Technician To be considered for this Senior Revit Technician position, you should have:, • Proven experience as a Revit Technician within Building Services / MEP, • Strong working knowledge of Revit MEP and AutoCAD, • Experience delivering projects across sectors such as commercial, residential, education, healthcare or defence, • Understanding of building services systems and construction methodologies, • Knowledge of BIM Level 2 standards and collaborative working practices, • Strong attention to detail and ability to manage multiple project deadlines, • Effective communication skills and a collaborative approach, • Experience working on defence or secure projects or eligibility for security clearanceDesirable Skills, • Experience using Navisworks or other BIM coordination tools, • Knowledge of ISO 19650 standardsWorking Environment The Senior Revit Technician will be based in a Bristol office working within a multidisciplinary Building Services environment delivering coordinated MEP design solutions across a wide range of sectors. The Senior Revit Technician will operate within a BIM-focused workflow aligned to industry standards and collaborative project delivery practices.What’s on Offer for Senior Revit Technician, • Competitive salary and benefits package with annual salary reviews, • 26 days annual leave, increasing to 31 days with service, plus bank holidays, • Hybrid working arrangements, • Structured training and development culture, • Mentoring from industry professionals, • Exposure to a wide range of building services projects, • ICE Training Agreement support, • Opportunity for client-facing involvement and business development exposure, • Clear career progression opportunities for the right candidateSummary This Senior Revit Technician role is suited to an experienced BIM / Revit technician within Building Services who has strong coordination experience and is looking to work across a diverse portfolio of multidisciplinary projects within a structured BIM environment.Key Keywords Senior Revit Technician | Revit MEP | BIM | Building Information Modelling | AutoCAD | Navisworks | ISO 19650 | BIM Level 2 | Mechanical Electrical Public Health (MEP) | HVAC | Pipework | Containment | Clash Detection | Model Coordination | Building Services | Defence Projects | Healthcare | Residential | Commercial

Trainee Field Service EngineerBristol £28,000 - £35,000 Basic + (OTE £42,000+) + Training + Stability + Job satisfaction + Family - feel + Travel paid + Profit Share Bonus + Company Van + Fuel Card + Personal use + Pension + Overtime + Door to doorStart your career in the medical engineering industry as a Trainee Field Service Engineer, where you'll receive full training to become a skilled engineer. This is a great opportunity for someone who wants to make the step to progress their career in a stable and rewarding sector, whilst having the opportunity to earn well through overtime and styaying away allowances. Join a forward-thinking medical equipment supplier as a field service engineer that is growing rapidly and offers excellent support, development, and progression opportunities. You'll work in a varied, hands-on role while maintaining a strong work-life balance and being part of a supportive team. Your Role As A Trainee Field Installation Engineer Will Include: • Assisting with installation of medical lifting equipment (e.g. ceiling track hoists), • Learning fault finding, servicing, and installation techniques, • Covering Bristol and surrounding areas, • Occasional travel & stay awayAs A Trainee Field Installation Engineer You Will Need To Have:, • Basic mechanical knowledge (college, apprenticeship, or hands-on experience), • A strong willingness to learn and develop, • Good attitude and reliability, • Full UK Driving Licence, • Ability to travel within the Bristol area and stay away when required Keywords: Trainee Field Service Engineer, Trainee Installation Engineer, Junior Engineer, Entry Level Engineer, Mechanical, Electrical, Installation Technician, Field Engineer, Mobile Engineer, Medical Equipment, Hoists, Lifting Equipment, Bristol, Bath, Swindon, South West

Vehicle Technician / Mechanical Engineer (Motorhome & Campervans) Juice Recruitment is delighted to be partnering with an award-winning, independent motorhome and campervan specialist in the search for a skilled Vehicle Technician / Mechanical Engineer to join their growing team based in Bristol. This is a fantastic opportunity to join a well-established business that truly values its team, offering a low-stress, organised working environment where quality always comes first. You’ll be part of a friendly, supportive workshop. DAY TO DAY • Carry out servicing, maintenance and repairs to motorhomes and campervans, • Complete cambelt replacements and engine work, • Conduct pre-MOT and post-MOT repairs, • Diagnose mechanical and electrical faults (including 12V systems), • Install accessories such as solar panels, bike racks, awnings, reverse cameras and towbars, • Accurately record work completed, faults and parts used on internal systems, • Estimate time and parts required for jobs, • Liaise with customers where required, explaining work carried out, • Maintain a clean, organised and safe working environment WE WOULD LOVE TO SEE • NVQ / City & Guilds Level 3 in Vehicle Maintenance (or equivalent), • Minimum 3 years’ experience in vehicle servicing and repair, • Strong diagnostic and problem-solving skills, • Experience working on LCVs such as Fiat Ducato, Ford Transit or Mercedes Sprinter (desirable), • Full UK driving licence and own tools Bonus (training can be provided): • 230V Leisure Vehicle Electrical Qualification, • 12V Leisure Vehicle Maintenance Qualification, • Lithium systems experience AND FOR YOU • OTE £45,000 (including bonus and overtime), • Competitive basic salary, • Workshop bonus scheme, • Monday – Friday 8:30am – 5:00pm, • Overtime and Saturday mornings available during busy periods, • 28 days holiday (including bank holidays), • Government pension, • Free on-site parking, • Free uniform JRBristol

Field TechnicianLocation:Coverage – Bristol, Swindon, South West (Down to Hayle), South Wales. Salary: £29,000 – £30,000 per annumWorking Days: Monday to Friday Job Type: Full-time Our client is seeking a dependable Field Technician to join their expanding team. Coverage – Bristol, Swindon, South West (down to Hayle), South Wales. This is a full-time role, Monday to Friday. This is an excellent opportunity for an individual who enjoys practical, hands-on work and is eager to develop their skills within a supportive environment. The role involves installing, maintaining, and repairing washroom systems across commercial sites. Full training, a company vehicle, and a fuel card will be provided. Experience in plumbing and electrical work is essential. Key Responsibilities * Install, maintain, and repair washroom systems * Carry out basic plumbing and maintenance tasks * Travel to client sites across West London • Install Air Fresheners and Hand Dryers Conduct inspections and identify maintenance issues * Operate hand and power tools safely and effectively * Maintain accurate records of completed work * Collaborate with colleagues to ensure timely project completion * Adhere to all health and safety regulations Requirements * Full UK driving licence (essential) * Practical maintenance experience is preferred * Basic knowledge of plumbing or drainage is advantageous * Reliable with excellent attention to detail * Capable of working independently and collaboratively within a team What’s on Offer * Salary up to £30,000 per annum Experience in plumbing and electrical work is essential * Company vehicle and fuel card provided * Comprehensive training and ongoing support * Opportunity to join a growing and supportive team If you enjoy practical, hands-on work and are seeking a role with training and career progression, we encourage you to apply today. Full training will be provided. THE company specialises in installing, maintaining, and undertaking reactive repairs in washrooms across a variety of corporate sites. They also install air fresheners and hand dryers. Experience in plumbing and electrical work is essential. Full training, tools, a company vehicle, and a fuel card will be provided. A full UK driving licence is essential. A DBS check will be required following a six-month probation period. Coverage – Bristol, Swindon, South West (down to Hayle), South Wales. This is a full-time role, Monday to Friday.

Requisition ID 63608 Position Type FT Permanent Workplace Arrangement #LI-Onsite About Kerry\nKerry is the world's leading taste and nutrition company for the food, beverage and pharmaceutical industries. Every day we partner with customers to create healthier, tastier and more sustainable products that are consumed by billions of people across the world. Our vision is to be our customers' most valued partner, creating a world of sustainable nutrition. A career with Kerry offers you an opportunity to shape the future of food while providing you opportunities to explore and grow in a truly global environment.About the role\n We are currently recruiting for two multi-skilled or electrically biased Maintenance Technicians to the join the Engineering Team at our Portbury production facility in Bristol. The facility is a dry blending and mixing production facility where we create flavour blends for some of the world's best loved brands, 100's of tonnes of product are precisely measured, mixed and packaged every week. This is a permanent position, with a 3 shift pattern Week 1 - PM - 1400 - 22.00 Week 2 - AM - 6.00 - 14.00 Week 3 - Nights - 22.00 - 6.00 Key responsibilities\n As a Maintenance Technician you will be responsible for • Complying with the health and safety policy and regulations., • Resolving breakdowns, carryout PM’s and work on project / improvement works with a view to minimizing production downtime., • Carrying out risk assessments with the relevant people and put controls in place to minimise the risk to acceptable levels where reasonably practicable., • Lock off any dangerous machinery immediately/ or repair and notify., • Actively seek to undertake PMs on offline machinery where time allows., • Fully complete PM sheets with all observations, jobs completed and recommendations and file with the Maintenance Planner, whilst always looking at ways of improving to PMs., • Actively gain as much information as possible from production personnel regarding the fault on the machine to speed up the fault-finding process., • Ensure engineering log and computer systems are fully filled in with all relevant information including PM numbers, all used parts, plant numbers, urgency of required parts, at the end of each shift., • HNC, City & Guilds or time served apprentice with appropriate electrical engineering qualifications., • Experience within a similar role ideally gained within a food manufacturing environment, if not food, experience within any manufacturing environment is highly desirable., • Electrically or biased, or multi-skilled. PLC experience highly desirable., • Hydraulic and Pneumatic systems experience highly desirable, • Flexible approach with a positive 'can-do' attitude., • Experience of SAP highly desirable. In Kerry we know that sometimes the perfect candidate doesn’t exist, and people can be put off applying for a role if they don’t fit all the requirements. If you are excited about working for us and have the majority of the skills or experience, then please do apply as you could be exactly what we are looking for. Why join Kerry?\n At Kerry, we believe in giving talented, curious people the opportunity to make a difference. We work as a team, searching for the best ways to inspire food and nourish life. We are a community of innovators, working across disciplines to solve global food challenges with a fresh approach. We want you to achieve whatever you put your mind to! We can offer you • Career development opportunities within a leading global player in sustainable nutrition, • Competitive salary, • Shift allowance, • Matched pension scheme up to 10%., • Life Assurance, • Employee benefit platform with discounts and offers for retailers online and offline, travelling, utilities and more., • Employee Assistance Program, supporting your emotional, physical, nutritional and financial wellbeing., • Inspiring People - Kerry's Global Recognition Program., • Access to Udemy, a learning platform with 1000's of free courses., • OurVoice, opportunity to share your feedback on the work environment every year., • OurShare, Kerry share plan available to all employees, with option to enroll once a year., • MyCommunity, have one day per year to volunteer for a worthwhile cause. In Kerry we benefit from the knowledge of our colleagues who bring a diverse range of cultures, backgrounds, lifestyles and experiences. One team fostering an inclusive culture that, above all, inspires food and nourishes life. One culture where everyone brings their unique perspectives and experiences to help make us better, together. We are committed to nurturing an environment of positivity and inclusiveness, where everyone can be at their best, both personally and professionally.Our recruitment, selection and assessment process are based on the skills and competencies of the specific roles and based entirely on merit. We are committed to and value Diversity and Inclusion in all recruitment processes within Kerry and do not discriminate based on gender, race, class, economic status, ethnic background, sexual orientation, age, political beliefs, veteran status, marital status or any other protected characteristic. Beware of scams online or from individuals claiming to represent us. A Kerry employee will not solicit candidates through a non-Kerry email address or phone number. In addition, Kerry does not currently utilise video chat rooms (e.g., Google Hangouts) to conduct interviews. Refuse any request that asks you to provide payment to participate in the hiring process (e.g., purchasing a “starter kit,” investing in training, or something similar). Kerry will not ask you to pay any money at any point in the hiring process with the exception of reimbursable travel expenses. In addition, any payments made by Kerry will be from official firm accounts bearing the Kerry name. Recruiter #LI-JP2 Posting Type LI

Senior Mechanical Estates Engineer/Technician (NHS) Start: ASAP | approx. 6 month FTC | Band 8a | On site- North of England An NHS healthcare organisation in the North of England is seeking an experienced Senior Mechanical Technician to support its estates function during a period of significant operational change. The Trust currently has electrical leadership in place and is looking to appoint a senior mechanical specialist to act as a technical lead within estates. This role will provide expert oversight, support planned preventative maintenance (PPM) activity and help relieve capacity pressures within the internal team. Key responsibilities • Provide senior technical leadership within NHS estates, with a mechanical specialism, • Act as subject‑matter expert in one or more of the following areas: Medical gases, Lifts, Ventilation systems, Water and plumbing systems, • Support delivery and oversight of planned preventative maintenance (PPM) programmes, • Ensure compliance with relevant Health Technical Memoranda (HTMs), • Work closely with estates teams to manage workload, reduce pressure on internal resources and support service continuity, • Be fully on site for the first three months, with scope for reduced on‑site presence thereafter Essential experience • Proven NHS experience, ideally within estates or facilities management, • Strong mechanical engineering background, potentially from an advanced trade (e.g. plumbing or mechanical engineering), • Experience working within NHS estates environments, • Good working knowledge of PPM and HTM requirements Other factors, including specific specialisms and contractual details, can be discussed for the right candidate. Why this role? This role has been created due to a significant volume of estates work that cannot be sustainably managed by the internal team alone. Bringing in an experienced senior interim will help increase capacity, reduce staff pressure, and ensure critical compliance and maintenance activity continues safely and effectively. How to Apply If you would like to apply for this position, please submit an up‑to‑date copy of your CV demonstrating how you meet the essential criteria, along with your availability, desired rate, and contact details. Due to the level of interest typically received for senior interim roles, we will only be able to contact candidates who closely meet the required criteria to discuss the opportunity further.

Job Title: CAD / BIM Technician – Infrastructure & Telecommunications Location Remote - Europe / EU Role Overview A CAD / BIM Technician is required to support the delivery of infrastructure and telecommunications design solutions across multiple projects. The role involves producing, maintaining, and updating technical drawings and BIM models to support telecoms networks, data centre infrastructure, and associated civil / building works. You will work closely with design engineers, project managers, and site teams to ensure accurate, coordinated, and buildable design information is produced and maintained throughout the project lifecycle. Key Responsibilities • Produce and update 2D CAD drawings and 3D BIM models for infrastructure and telecoms projects, • Support design teams with layout drawings for structured cabling, fibre networks, containment systems, and associated infrastructure, • Maintain drawing standards, templates, and version control in line with project requirements, • Coordinate design information between disciplines (civil, electrical, mechanical, and telecoms), • Assist in producing as-built drawings based on site feedback and redline mark-ups, • Support data centre and network infrastructure designs, including rack layouts, cable pathways, and equipment placement, • Ensure compliance with internal design standards and client specifications, • Liaise with engineers and site teams to interpret design changes and update documentation accordingly, • Support BIM coordination processes, including clash detection reviews where applicable, • Manage drawing documentation within project information management systems (e.g. CDE platforms) Required Experience • Experience in a CAD or BIM technician role within infrastructure, telecoms, or data centre environments, • Strong working knowledge of AutoCAD (essential), • Extensive experience using Autodesk Revit for BIM modelling and project delivery (essential requirement), • Experience with structured cabling systems, fibre networks, or telecoms infrastructure design, • Experience producing technical drawings for installation or construction projects, • Familiarity with working in multi-discipline engineering environments, • Experience working with redline mark-ups and as-built documentation updates, • Understanding of basic data centre or critical infrastructure layouts is advantageous Skills & Competencies • Strong attention to detail and accuracy in technical drawing production, • Ability to interpret engineering sketches and technical requirements, • Good communication skills for working with engineers and site teams, • Ability to manage multiple drawing packages and deadlines, • Organised approach to document control and version management, • Comfortable working in structured project delivery environments Desirable • Experience in telecoms infrastructure, fibre networks, or data centre environments, • Exposure to GIS systems or network mapping tools, • Understanding of IMACD environments or live infrastructure changes, • Familiarity with ISO 19650 BIM standards, • Experience supporting large-scale infrastructure or multi-site projects

Job Title: Operations and Maintenance Engineer – EV Charging Infrastructure Salary: £45,000 - £50,000 DOE Location: Bristol (Hybrid – office and remote) Imagine your next mission delivering vital public service on a city scale. You’ve thrived in high-stakes environments, maintaining critical electrical systems under pressure. Now picture applying that same drive to keep Bristol’s electric-vehicle network online, directly powering climate action and daily life. This role offers you the chance to step off the tools, lead complex installations and shape processes that enable a cleaner, more resilient city. Why this role You’ll be at the heart of a pioneering city-wide decarbonisation programme, responsible for ensuring that every AC and DC charge point is ready when drivers need it. Your work means fewer breakdowns, faster fixes and greater confidence in EV technology. With your disciplined approach and attention to detail, you’ll help Bristol achieve its net-zero targets while influencing the development of best-in-class maintenance procedures. The sense of purpose you felt serving your country will continue here, as you deliver tangible benefits for businesses, public institutions and residents alike. What you’ll do You will manage contractor teams through each stage of installation, commissioning and maintenance, balancing remote troubleshooting with hands-on site visits. Interpreting BS 7671 regulations, you’ll lead fault-finding exercises, verify compliance records and author clear technical procedures. Your confident challenge of design assumptions will refine installation standards, while your meticulous reporting will underpin transparent performance monitoring. Regular liaison with project managers, clients and manufacturers will ensure smooth handovers and rapid resolution of any issues. About the company Our client is a trusted energy-solutions partner to public sector bodies, educational institutions and healthcare providers across the UK. They design, build and operate tailored efficiency upgrades and distributed energy systems that reduce costs, enhance resilience and drive decarbonisation. Their Bristol EV charging network is internationally recognised as a world-first model for sustainable urban energy. About you You come from a strong electrical maintenance background—perhaps as a service electrician, radar or avionics technician, submarine electrical specialist or similar—with at least two years of hands-on experience. You excel at diagnosing faults under pressure, thrive on ownership of complex systems and communicate confidently with technical and non-technical stakeholders. Armed-forces experience is highly valued for the discipline and adaptability it brings, but anyone with comparable skills and the determination to master EV charging standards on the job will succeed. Rewards & growth You’ll receive full training in EV-charging regulations, professional development opportunities and clear progression pathways. Alongside a competitive salary and hybrid working model, you’ll join a collaborative team that values integrity, initiative and shared purpose as you help power Bristol’s sustainable future. How to apply Eager to apply your electrical expertise to Bristol’s EV revolution? Contact with your CV and a brief note on why you’re the ideal candidate. We look forward to hearing from you.

Electrical Maintenance Engineer (electrical / multiskilled) £52,635 (including shift allowance) SUEZ are looking for a skilled maintenance technician to join our material recycling facility where we sort and process recyclable materials, diverting waste from landfill and supporting the circular economy. Location: Avonmouth Hours: 4 on 4 off, 2 days 2 nights (average 40 hours per week) Salary: £47,850 Benefits: 10% shift allowance, overtime, up to 10% annual bonus, 20.5 days inclusive of bank holidays, 5% employer pension and additional benefits. At SUEZ, we act for what truly matters: for the environment, for society, and for the future. This is the place for people who want to make a real impact, not just watch from the sidelines. Join us and help drive positive change through innovative solutions that build a more resilient and sustainable world. What will I be doing? You'll help ensure our Avonmouth MRF operates safely, efficiently, and at full capacity: * Deliver planned and reactive maintenance across all plant areas, ensuring installations and modifications meet the latest standards and regulatory requirements. * Work closely with colleagues across functions to identify continuous improvement opportunities and drive changes that lower maintenance costs and boost efficiency. * Maintain fixed plant equipment, applying hands-on knowledge...

“We’re looking for a Service and Commissioning Technician at VPS Emsys Maritime who can support our clients globally. International travel to exciting locations, working on specialised projects” WHO WE ARE Come and join the revolution, as the world is challenged to reduce CO2 and Greenhouse gases to prevent further global warming, there is an ever-increasing requirement to report exhaust gas emissions from the shipping industry. VPS Emsys Maritime is a leading manufacturer of ship and maritime exhaust gas emissions measurement systems. Emsys Maritime Ltd. was acquired by VPS in 2023 and has been incorporated into the VPS Digital division. VPS is the world’s leading marine fuel and lubricants testing and analysis company and a pioneer in its field for creating innovative, sustainable solutions to the shipping industry. We are experiencing strong growth, with a forward order book extending well into the next decade. To support our expanding customer base and continued product development, we are looking to strengthen our team. Our internal supportive culture is ideal for those who want to join an organisation which provides a challenging environment and opportunities for personal skills development. As exclusive suppliers to marine and offshore industries, our highly experienced team have market-leading expertise in the design, installation, commissioning, and through-life support of marine emissions monitoring systems (EMS) THE OPPORTUNITY We are currently looking for a marine service and commissioning technician to join our team. You will be part of a highly experienced team working on the design, installation, commissioning, and long-term support of marine emissions monitoring systems. This is a key service role, servicing, repairing, installing and commissioning of Emsys emissions monitoring systems onboard ocean-going ships and shipyards on a global basis. Your background should include working on electrical, electronic and mechanical systems and you should be comfortable in fault-finding systems that include PLC and PC based software environments. A full in-depth system training will be provided. This role will require flexibility to travel globally to meet our client’s requirements. What you will do: In this role you will • Carry out service, maintenance and repair work on board ships worldwide, • Ensure systems are up and running by diagnosing issues and delivering effective first-time fixes, • Recommend spares holding for customers., • Provide remote technical support to customers, including troubleshooting guidance, • Update admin systems of work completed., • Preparing Method of Works and Plans of Action as required., • Work closely with the Service Manager to help efficiently schedule your visits, • Update inhouse systems with service information reports, • Liaise directly with customers, captains and port agents, • Handle administrative tasks such as reporting, documentation and expense processing, • Contribute to a safe working environment by following HSQE procedures. This is important as we deal with challenging customers in sometimes difficult environments. What you bring We are looking for someone who is practical, technically skilled and confident working with customers in dynamic environments. • Technical background in Mechanical or Electrical Engineering (or equivalent), • Around 3+ years of relevant experience, • Ideally a technical understanding of the marine emissions monitoring industry and the products and services supplied by the company., • Strong organisational and administrative skills, • Confident communicator in English (spoken and written), • Able to stay calm and constructive in challenging situations, • Customer-focused with a proactive, problem-solving mindset, • Comfortable taking initiative and working independently, • Demonstrate drive and passion for continuous improvement., • Physically fit and comfortable working on board ships Additional requirements • Willingness to travel internationally (Europe, US, Middle East, South America, Caribbean, Far East), • Valid right to live and work in the UK, • Full driving licence OUR OFFER TO YOU • Fulltime job, • Competitive base salary (£45,000-£50,000 per year), • Deployment allowance (£45 per day), • Flexible working contract, • Tools, workwear, laptop, mobile phone, tablet, company credit card, travel insurance, • Comprehensive training program, • 28 days annual paid leave

FuzeHR is now hiring a Service Technician/Service Engineer based in the UK! This is an exciting opportunity to join a highly successful business in the mining/mineral processing equipment space. The successful Service Engineer will provide post sales service, commissioning, and client support for company supplied equipment in domestic and international locations. No need to report into an office or shop daily, this is a fully remote opportunity involving work on customer sites & from home. Apply today! What are the Perks? • Competitive compensation (dependent on experience and qualifications)!, • M-F, day shift schedule with minimal requirement to work evening or weekends, • Work from home while not servicing customer equipment! What are the Responsibilities? • Post-sales support, including client follow-up and training, • Identify issues in the field and resolve them; look for areas of improvement; bring forward ideas or solutions, • Write service reports and commissioning checklists upon trip completion, • Create procedures, instructions, reports, training information which may include manuals, PowerPoint, and videos, • Act as a content expert for Technical Writing department; support their development of manuals, procedures and documentation, • Follow-up on action items identified during commissioning or service trips, • Assist with Falcon SB bowl refurbishment program; generate reports for the Parts Team, help coordinate and support work processes, • Assist with larger projects including assembly, teardown and coordination; lead and direct a third party vendor to fabricate and assemble company equipment, • Assist with shop assembly when resources require it; this may be in Perth, Langley, Montreal, or at an international vendor, • Assist QA department with quality inspections, • Handle warranty claims; disposition and needed actions to see process to completion using new procedures, • Test company equipment after assembly; follow FAT (factory acceptance test) steps; bring forward any concerns and ensure corrections, • Assist with spare parts orders (packing, picking, communication with Langley, etc.); aid with annual inventory count; aid other company departments (Quality, Procurement, etc.) if local support is required What are the Requirements? • Good mechanical knowledge or mechanical aptitude; follows company and client safety protocols; best practices; follows procedures; ability to follow directions; continued growth and development, • Experience with equipment commissioning and service, • Experience with analysing and troubleshooting machinery both mechanically and electrically (Low Voltage), • Able to read, follow, and understand mechanical (assembly) and electrical drawings, • Clear communication with clients and peers on equipment installation, operation, maintenance, and repair, • Understand how to see a job through and adjust your schedule to suit the task at hand, • Demonstrates personal leadership; looks to develop and stays up to date with required training including but not limited to White Card, Senior first aid, HSR, electrical safety, mineral processing, automation, • Use and understand various Automation software; be able to clearly understand directions if being instructed on a program change, • Proficient in MS Word, Excel, PowerPoint and Adobe Acrobat or other PDF editors, • Able and willing to travel domestically and internationally on short notice and up to 50% of the time. Destinations may be underdeveloped, • Hold a valid Australian passport and maintain good standing, • When working onsite, able to match client hours which may require working 10-12 hour shifts, • Flexible with work/personal life balance to communicate with Langley head office at inconvenient times due to the time difference Bonus Points • Millwright (apprentice program), • Electrician (apprentice program), • Mineral Processing or mine experience, • Multiple languages Personal Attributes • Self-starter, proactive and motivated, • Ability to deliver under pressure or in uncomfortable conditions, • Dependable, trustworthy, accountable; owns mistakes and learns from them, • Works well both independently and with others in a team, • Able to accept and grow from constructive criticism, • Well organized and able to prioritize activities, • Confident in making decisions, some of which may not be well received; diplomatic approach to ensure work gets done, • Ability to recognize when to ask for help, • Flexible to work in a small/medium-sized business

We are urgently looking to onboard Quality Technicians for upcoming projects across the UK & Ireland. Key Requirements: Right to work in the UK (mandatory) Working hours: 10h/day, 60h/week Rotations in line with local/company regulations Must meet HSE standards, including: PPE Laptop & phone Suitable vehicle Valid GWO certifications Scope • Supervise the execution of the foundations of the turbines of the wind farm., • Quality review of main components when arriving to site., • Quality review of minor components at the site warehouse., • Creation of punch items., • Drafting and management of non-conformities., • Audit the execution of the works., • Quality review of the complete WTG when finished, according to Nordex standards., • Report to the Quality Department the progress of the project. Description The work will be performed by a qualified technician/s, with experience in renewable energy with Engineering degree, preferably in Mechanical or Electrical Engineering. Vocational Education (FP) might be accepted. The technician/s will have a car to be able to move across the wind farm and the protective personal equipment (PPE) necessary to access to the wind farm as well as equipment for working at height. Certificates of trainings in working at height (GWO or similar) will be provided. Besides, the technician/s should also have all the equipment to develop their activities such as laptop, and smart phone. Equipment • PPEs for working at heights, • PPEs according to RD614/2001, EN50110-1 or equivalent for local regulations, • Individual car (in compliance with local regulations, in and out of the construction site), • Laptop, • Smart phone Special trainings There are some specific trainings the worker must be trained on: • GWO BST (Basic Safety Training), • Electrical Risk training, according to RD614/2001, EN50110-1 or equivalent for local regulations, • Corresponding Service Lift (Jaso, Hailo or 3S) training for use, • Corresponding Service Lift (Jaso, Hailo or 3S) training for certification/installation (only for DIN projects) • Avanti fall arrester certification (only for DIN projects)

Very interesting EC&I Technician opportunity with a multinational manufacturing company based in Bolton, Greater Manchester. Growth Opportunities (promotion plan already confirmed), Insane Benefits, 60+ days off! But, we are looking for the diamond in the rough: • Must have Compex certification and hands-on experience in ATEX / Hazardous environments., • 18th Edition will strengthen your profile., • Controls & Instrumentation experience - as much as you can possibly leverage, • Functional Safety / SILs - very beneficial This is however a Technician position, yes it comes with perks, but it is as mentioned - Hands On - Practical experience of implementing what the Engineering group designs is important. I am not going to list compliance needs, education / qualification needs, years of experience... If you have a profile matching the above closely, reach out, you will be relevant, and I will share all the info I can - this is not one to be missed. If you are based anywhere in the UK, the company is happy to look at candidates that needs to relocate. This is not a remote position, just opening it up to the entire UK, for those willing to relocate for an awesome opportunity. Location is close to Bolton, Greater Manchester. Unfortunately, this position can not offer Visa / Work Permit sponsorship.

CT19 is working with an emerging cleantech organisation focused on advancing sustainable solutions for complex materials. With applications across multiple industrial sectors, the business is developing scalable technologies designed to reduce waste and support circularity. The company is entering an exciting growth phase, building out pilot-scale operations and expanding its engineering capability. Process Technician role: This is a hands-on role for someone who enjoys making things work. You will join during the commissioning phase of a pre-pilot system and play a key role in the transition to pilot operations. You will be involved in building, commissioning, operating and maintaining process equipment, working closely with engineering and R&D teams to support trials and ensure the plant runs effectively. This role is ideal for someone with a strong practical mindset who takes pride in fault-finding, problem-solving and keeping systems running in a fast-paced environment. Process Technician responsibilities Build & Commissioning • Support the physical build and commissioning of process equipment, • Install and test pumps, pipework, valves, heat exchangers and associated systems, • Fabricate brackets, supports and custom fixtures where required, • Operate pilot plant equipment during trials, following procedures and monitoring performance, • Carry out preventative maintenance, servicing and calibration activities, • Support experimental programmes by setting up equipment and monitoring runs, • Prepare plant and materials ahead of trials, • Record data and provide practical observations during testing Process Technician requirements • Strong practical mechanical ability, gained through hands-on experience or training, • Experience working with process plant, industrial equipment or mechanical systems, • A methodical approach to fault-finding and problem-solving, • Understanding of safe working practices in a process or industrial environment, • Engineering apprenticeship, HNC/HND or equivalent, • Experience in process industries such as chemicals, manufacturing, or food production, • Experience with pipework, fluid systems or pneumatics, • Basic knowledge of electrical systems or instrumentation, • Relevant operational licences (e.g. forklift, IPAF)

Calibration Technician (Electrical / Torque) Location: Bristol (BS15 4NQ) Department: Calibration Laboratory Reporting to: Laboratory Team Lead Salary:26k – 34k depending on experience The Role We are seeking a skilled and detail-oriented Calibration Technician to join a leading Calibration La

HGV Technician / HGV Mechanic / LGV Fitter Location: Avonmouth, Bristol Pay: £43,(Apply online only)–£53,(Apply online only) per year | OTE £47,300–£58,300 | Overtime at 1.5x Hours: Monday–Friday | Early and late shifts 06:00–14:00 / 14:00–22:00 Job Type: Full time, permanent Tru Talent is a specialist recruitment agency placing experienced HGV Technicians and HGV Mechanics across the UK. About the Role Are you an experienced HGV Technician or HGV Mechanic looking for a well-paid role in Avonmouth? This is an excellent opportunity to join a skilled commercial vehicle workshop offering £43,(Apply online only)–£53,(Apply online only) per year with an OTE of £47,300–£58,300 including overtime. Offering early and late shift stability, manufacturer-led training and clear career progression, this role is ideal for an LGV Fitter or Commercial Vehicle Technician who wants strong earnings within a professional and supportive dealer network environment. If you are an HGV Technician or HGV Mechanic based in or around Avonmouth or Bristol looking for a role that genuinely invests in your development, do not miss this one. What You Will Be Doing As an HGV Technician / HGV Mechanic / LGV Fitter you will be responsible for: Servicing, maintaining and repairing HGVs and LGVs to DVSA and manufacturer standards Diagnosing mechanical and electrical faults effic...

SENIOR ELECTRICAL BUILD ENGINEER / ELECTRICAL BUILD TECHNICIAN Role: EXPERIENCED ELECTRICAL BUILD ENGINEER / ELECTRICAL BUILD TECHNICIAN Location: Bristol Salary: £Competitive salary plus excellent benefits ARCA is partnered with a rapidly scaling, high tech business seeking to expand its electrical engineering team by hiring an experienced and enthusiastic ELECTRICAL BUILD ENGINEER / SENIOR ELECTRICAL TECHNICIAN. The successful candidate will have experience working in a highly productive assembly environment and have a good experience as an Electrical Build Engineer. This is a fantastic opportunity to be part of a high technology business. Responsibilities: * Construct electrical assemblies, looms, and harnesses. * Conduct electrical testing. * Offer electrical support both on-site and off-site as needed. * Fault finding * Build individual components as well as handle larger production batches. * Keep detailed records of assembly and testing progress. * Document any instances of quality non-compliance and escalate as necessary. * Assist with field installations, modifications, and maintenance domestically and internationally. * Work collaboratively * Maintain a safe working environment. Experienced required: * Electrical NVQ 3 or equivalent or equivalent working experience in the electrical industry * Experienced Electrical Technician / Electrical Fitter * Strong build experience of electrical m...

An excellent opportunity has arisen for an experienced Maintenance Electrician to join one of the country's leading Facilities Management companies working in the Bristol / Swindon and the surrounding region. The ideal candidate will have a strong electrical background and hold electrical qualifications such as NVQ/SVQ Level 3 in electrical installations or maintenance, and 17/18th edition as a minimum. The role will be working as part of a team working at a number of retail sites in the region undertaking a range of building maintenance duties. The purpose of this role carry out planned and reactive maintenance on electrical and mechanical plant. Duties: Support other technicians with any major or minor maintenance work. Complete all necessary PPM's and reactive maintenance schedules within agreed timescales and to ensure all necessary paperwork is completed accurately and as required. Prioritising and completing minor maintenance and repair work to agreed timescales. Ensuring all tools and equipment necessary to complete minor maintenance and repairs are always available and serviceable. Although aligned to an area for the purpose of PPM completion there may be times that the Technician will be required to attend other sites within the cluster to carry out work. Work with company and client colleagues to ensure laid-down standards of quality are always maintained. Represent the company in a professional manner at all tim...

Mobile Fleet Engineer (HGV Mechanic) Expensed Van Provided Your day starts when you start your vehicle. Are you an experienced HGV Technician looking for a mobile role where no two days are the same? We are looking for a self-motivated and independent Mobile Fleet Engineer to support a network of customer sites across the South West. You will travel to customer workshops and rural sites carrying out servicing, repairs, and maintenance across a wide range of specialist vehicles and equipment. The equipment you will work on includes: HGVs Ground Support Equipment (GSE) RoRo (Roll-on Roll-off) equipment Tractors and Tugs Shunters Cherry Pickers Other specialist/ bespoke operating platforms Key Responsibilities Attending vehicle callouts Carrying out preventative maintenance Responding to emergency breakdowns Pre-arranged servicing at customer and rural sites MOT preparation Engine work and diagnostic investigations Rectifying running defects Chassis and fabrication work Working with hydraulic and pneumatic systems Improving vehicle standards and reliability Electrical and wiring inspections and repairs Coverage Area You will be covering the following locations: South Bristol Bath Frome Weston-super-Mare Glastonbury About You We are looking for someone with a strong technical background and the ability to work independently while representing the company pro...

Job Title: Vehicle Technician Location: Bristol Hours: Monday to Friday, 3 week rotating shift pattern Week 1: 06:00-14:30, Week 2: 08:00-16:30, Week 3: 13:30-22:00. 1 in 3 Saturdays on a rota, with a day off in the week Salary: £39,715 Basic + Bonus (OTE £50,000+) Ref: 30307 We are seeking a skilled and experienced Vehicle Technician to join our client’s commercial dealership in Bristol. The successful Vehicle Technician will be responsible for diagnosing, repairing, and maintaining a variety of vehicles makes and models. Benefits: 22.5 days annual holiday (plus bank holidays), rising with service. 39.5 hour working week. A competitive company pension scheme. A great opportunity to develop your career. Modern workshop facilities and equipment. Annual training and development plan provided. Development and progression opportunities into management structure.Vehicle Technician Responsibilities: Diagnose and repair vehicle problems, including engine, transmission, brake, suspension, and electrical issues. Perform routine maintenance tasks, such as oil changes, tire rotations, and brake inspections. Use diagnostic tools and software to identify and resolve complex issues. Keep accurate records of all work performed and parts used. Communicate with customers about vehicle issues and repair recommendations. Maintain a clean and organized work area.Vehicle Tec...

HGV Technician We are recruiting for an experienced HGV Technician to work for our client who are in Bristol. THE DUTIES: * Perform maintenance and repairs on Varied Fleet Vehicles. * Repairing and replacing faulty components. * Carry out mechanical and electrical fault-finding and repairs. * Prepare and present HGVs for MOT inspections and periodic safety checks. * Complete job cards, inspection sheets, and order parts as needed. * Maintain a safe, clean, and organised workshop. ESSENTIAL QUALIFICATIONS: * Previous experience on HGV’s. * NVQ Level 3 or equivalent (Certificate required) THE HOURS: This is an ongoing temp position. Rotating Shifts Monday – Friday: 6am – 2pm Monday – Friday: 2pm – 10pm This is an on-going temporary position with no end date. You can be paid PAYE or UMBRELLA to suit your needs. There are lots of permanent opportunities available and for the right candidate. THE PAY: You will earn an hourly rate between £20 - £28 per hour. If you’re interested in this position, please give Louise a call, details are below: Louise Bowles Recruitment Consultant (phone number removed)...

Maintenance Engineer (electrical / multiskilled) SUEZ are looking for a skilled maintenance technician to join our material recycling facility where we sort and process recyclable materials, diverting waste from landfill and supporting the circular economy. Location: Avonmouth Hours: 4 on 4 off, 2 days 2 nights (average 40 hours per week) Salary: total package £52,635 (including 10% shift allowance) Benefits: overtime, up to 10% annual bonus, 20.5 days inclusive of bank holidays, 5% employer pension and additional benefits. At SUEZ, we act for what truly matters: for the environment, for society, and for the future. This is the place for people who want to make a real impact, not just watch from the sidelines. Join us and help drive positive change through innovative solutions that build a more resilient and sustainable world. What will I be doing? You'll help ensure our Avonmouth MRF operates safely, efficiently, and at full capacity: * Deliver planned and reactive maintenance across all plant areas, ensuring installations and modifications meet the latest standards and regulatory requirements. * Work closely with colleagues across functions to identify continuous improvement opportunities and drive changes that lower maintenance costs and boost efficiency. * Maintain fixed plant equipment, applying hands-on knowledge of conveyors, motors, gearboxes, hydraulics, and basic electrical systems. * Promote...

Job Title: Vehicle Technician Location: Bristol Hours: Monday to Friday, with 1 in 4 Saturdays on a rota - 42.5 hours per week Salary: up to £40,000 basic OTE £50,000 Ref: 29988 We are seeking a skilled and experienced Vehicle Technician to join our client’s main dealership in Bristol. The successful Vehicle Technician will be responsible for diagnosing, repairing, and maintaining a variety of vehicles makes and models. Vehicle Technician Benefits: Pension. Critical illness pay. Life assurance. 30 days holiday including bank Holidays, increasing with service. Vehicle Technician Responsibilities: Diagnose and repair vehicle problems, including engine, transmission, brake, suspension, and electrical issues. Perform routine maintenance tasks, such as oil changes, tire rotations, and brake inspections. Use diagnostic tools and software to identify and resolve complex issues. Keep accurate records of all work performed and parts used. Communicate with customers about vehicle issues and repair recommendations. Maintain a clean and organized work area.Vehicle Technician Requirements: You will need to have experience as a vehicle mechanic and a relevant and up to date Level 3 qualification. You will be a person who takes great pride in your work. You will have incredible attention to detail and an eye for spotting things others cannot. You will need a f...

Brightsmith are pleased to be representing a climate technology company developing processes to recover and reuse high-value materials from industrial waste, supporting sustainable manufacturing in broad range of sectors, incluing aerospace. We’re looking for a practical, hands-on technician to support the build, commissioning, and operation of an early-stage industrial pilot plant. This is a role for someone who enjoys making things work, installing equipment, troubleshooting issues, and keeping systems running in a fast-moving environment. Key responsibilities: Build & Commissioning • Install and set up mechanical and process equipment (pumps, pipework, valves, etc.), • Support system testing and commissioning activities, • Fabricate and adapt components such as brackets, supports, and fixtures, • Work closely with engineers and external contractors during build phases Operations & Maintenance • Operate plant equipment during process trials, monitoring performance and conditions, • Perform preventative maintenance, servicing, and basic calibration, • Diagnose faults and carry out effective, root-cause fixes, • Maintain a safe, clean, and organised working environment Trial Support • Prepare equipment and materials for experimental runs, • Assist with trial execution, including monitoring and data/sample collection, • Provide practical feedback and observations to support improvements Safety & Compliance • Follow and contribute to safe working practices and procedures, • Identify and report hazards or issues, • Maintain clear records of maintenance and plant status Experience Required • Strong hands-on mechanical ability (through experience, training, or apprenticeship), • Experience working with industrial equipment, plant, or mechanical systems, • A practical, problem-solving mindset with a structured approach to fault-finding, • Comfortable working in a process or safety-critical environment, • Self-motivated, reliable, and proactive, • Technical training (apprenticeship, HNC/HND, or equivalent), • Experience in process industries (e.g. chemicals, pharma, food & beverage), • Exposure to pipework, pneumatics, or fluid systems, • Basic familiarity with electrical systems or instrumentation If you are interested please apply below, or reach out directly at

Field Service Engineer - Installation & Maintenance Technician Field based | North, Midlands & South UK | Smart Parcel Lockers We’re supporting a fast‑growing business rolling out a nationwide network of smart parcel lockers across the UK. As installations accelerate, they are looking to hire field‑based technicians to take ownership of on‑site site surveys, installations, commissioning, maintenance, and ongoing support of live locker units across the North, Midlands, and South. This is a hands‑on field role for someone who enjoys working with physical, connected hardware in real‑world environments. The role You’ll be responsible for installing delivered locker units on site, commissioning them into service, maintaining live equipment, and resolving faults in the field. The lockers are battery and solar powered, modular, and connected via IoT technology. This role is fully field based and does not involve building units from scratch. What you’ll be doing • Install parcel locker units at customer sites, • Conduct pre-installation site surveys to confirm location suitability, access, and ground conditions, • Position, secure, and commission lockers so they are live and operational, • Carry out system checks, functional testing, and go‑live sign‑off, • Diagnose and repair mechanical, electrical, or connectivity faults on site, • Perform preventative maintenance and routine inspections on live lockers, • Support firmware or product updates in the field, • Respond to escalated faults or repeat issues, • Work alongside subcontractors or delivery partners during larger regional rollouts, • Accurately document installations, maintenance activity, and fixes, • Represent the business professionally on retail, landlord, and public‑facing sites What we’re looking for • Experience in field service, installation, or maintenance roles involving physical and connected equipment, • Strong practical and mechanical aptitude with a logical fault‑finding approach, • Comfortable working independently in a field‑based role, • Confident working with low‑voltage, battery‑powered, or IoT‑enabled systems, • Full UK driving licence and willingness to travel within your region Experience with the following is desirable • ATM field engineering, • Vending machines or kiosks, • E‑bike or e‑scooter rental fleets, • Smart lockers, access control, CCTV, parking systems, or EV charging equipment Electrical qualifications are not essential. The lockers are battery and solar powered, operating on low‑voltage systems. Training will be provided on the specific product. What’s provided • Company van or mileage reimbursement, • All tools and equipment required to carry out the role, • Full product training Why join • Be part of a rapidly scaling UK infrastructure rollout, • Varied, hands‑on field work rather than desk‑based maintenance, • Opportunity to grow with the product and influence how it evolves in the field Locations: North Midlands South East (If you are unable to cover these locations please do not apply) You will be based from home but travelling daily to various sites across your region. Process: Apply via LinkedIn If your application accurately matches the criteria of this role we will be in touch to arrange 1st stage recruiter interview. 2 stage video interview with hiring team

Electrical Assembly Technician Bristol £32,000 - £35,000 + Shift premium (17.5%) + 33 days leave + Bonus + EAP + Share scheme • £32,000 - £35,000, • Shift premium (17.5%), • 33 days leave, • Bonus, • EAP The Role: • Building systems and sub-assemblies for complex systems., • Ensuring that the requirements of the BOM and the customer specification are achieved., • Identify and resolve build problems., • Reporting technical issues., • Wiring and Soldering., • Support and promote 5S initiatives., • Time served Electrical apprenticeship OR City and Guilds part 3, or HND, HNC, or BTech level 3 in Electrical Engineering., • Experience in an electrical fitting/assembly position., • Lead-free soldering., • Panel wiring to schematics., • Ability to read electrical drawings., • Shift premium (17.5%) - overall guaranteed earnings between £37,600 - £41,125, • 33 days leave, • Bonus, • Private Healthcare, • EAP Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business. Job Tenure: Permanent Salary: £32000 - £35000 per annum + + Shift premium + 33 days AL + Bonus + EAP Location: Bristol,

Field Service Engineer / Water Treatment Engineer / Service Technician required to join a leading Water Treatment solutions provider.The successful Field Service Engineer / Water Treatment Engineer / Service Technician will be responsibvle for both Electrical and Mechanical maintenance, servici

Electrical Assembly Technician Bristol £37,000 - £41,000 + Overtime + 33 days leave + Bonus + EAP + Share scheme £37,000 - £41,000 inclusive of (shift premium (17. Bonus Overtime EAP Share schemeThis is a fantastic opportunity for an electrically minded assembly technician

Have worked as: Electrical Maintenance Engineer, Automation Engineer, Electrical Technician, Multiskilled Maintenance Engineer or Maintenance Electrician. The Role: * Perform maintenance tasks, including preventative, predictive and corrective maintenance. We're working with a leading national

Industrial Electrician (Switchgear) £43,000 - £48,000 Overtime OTE 75k Bonus Company Van 7% Pension 33 Days Holiday Door to Door Pay Bristol Are you an Industrial Electrician/Engineer with switchgear servicing experience, looking to join a renowned company founded over 100 years ago, offering plenty of bonuses and allowances to boost your earnings to £75k? Are you looking to join a market-leader, offering full internal training on bespoke equipment, plus tailored development to learn test and commissioning? In this role you will travel to sites performing servicing, installations, maintenance and upgrades of electrical equipment such as switchboard and related equipment. You will buddy up with another engineer and average 2 nights away a week, paid at a premium. Originally established over 100 years ago, this company provide electrical services to the Oil & Gas, Mining, Industrial, Rail, and Utilities industries across the globe. They pride themselves on continuous growth and developing their staff through inhouse training to reach their true potential. This role would suit someone who has worked on MV/HV switchgear looking for a diverse, interesting role within one of the UKs leading companies in their market. The Role: Installing, servicing, maintaining and upgrading electrical equipment Working on switchgear, medium and high voltage Serving the oil & gas, industrial, rail, utilities and mining industries 90% UK and European travel, 2 nights away a week The Person: Industrial Electrician/Engineer Experience working on switchgear (medium or high voltage) Reference number: BBBH24217 Engineer, Engineering, Service, Manufacturing, Production, Servicing, Technician, Field, Mobile, Machinery, Machine, MV, Power, Distribution, Drives, Switchgear, Cardiff, Swindon, Gloucester If youre interested in this role, click apply now to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&Cs, Privacy Policy and Disclaimers which can be found at our website.

Handyperson /Field Engineer / Maintenance Technician Location: Bristol - Coverage – Bristol, Swindon, South West (down to Hayle), South Wales. Salary: £29,000 (starting salary) - £30,000 (following successful six-month probation) This is a full-time position – Monday to Friday Job Type: Full-time Our client is seeking a dependable Handyperson to join their expanding team based in Bristol . This is an excellent opportunity for individuals who enjoy practical work and wish to develop their skills within a supportive and professional environment. The role involves installing, maintaining and repairing washroom systems across commercial sites. Comprehensive training, a company vehicle and fuel card will be provided. Electrical, plumbing or drainage experience is advantageousl, as the company specialises in installing, maintaining, and carrying out reactive work in washrooms across a variety of corporate sites, as well as fitting air fresheners and hand dryers. Key Responsibilities Install, maintain and repair washroom systems Carry out plumbing and general maintenance tasks Fit hand dryers and air fresheners (electrical work) Travel to client sites as required Conduct inspections and identify maintenance issues Operate hand and power tools safely and effectively Maintain accurate records of work completed Collaborate with colleagues to ensure timely project completion Adhere to all health and safety regulations and procedures Requirements Full UK driving licence (essential) Disclosure and Barring Service (DBS) check required following successful completion of the six-month probation period Practical or maintenance experience preferred Basic knowledge of electrical, plumbing or drainage systems is beneficial Reliable with strong attention to detail Able to work independently and collaboratively within a team Whats on Offer £29,000 (starting salary) - £30,000 (following successful six-month probation) Company vehicle and fuel card provided Comprehensive training and ongoing support Opportunity to join a growing, inclusive and supportive team If you enjoy practical work and are seeking a hands-on role with training and clear progression opportunities , we encourage you to apply today.

Industrial Electrician (Switchgear / Commissioning) £50,000 - £58,000 Overtime OTE 85k Bonus Company Van 7% Pension 33 Days Holiday Door to Door Pay Bristol Are you an Industrial Electrician/Engineer with experience commissioning switchgear, looking to join a renowned and continuously growing company, where you can be the go-to expert in the field, working on a range of large-scale industrial projects? In this role you will travel to sites performing testing & commissioning, servicing, installations, maintenance and upgrades of electrical equipment such as switchboards and related equipment. You will buddy up with another engineer and average 2 nights away a week, paid at a premium. Originally established over 100 years ago, this company provide electrical services to the Oil & Gas, Mining, Industrial, Rail, and Utilities industries across the globe. They pride themselves on continuous growth and developing their staff through inhouse training to reach their true potential. This role would suit an Industrial Electrician/Engineer with experience commissioning switchgear looking for a long-term career as the technical expert in a national company. The Role: Service, maintain, test, and commission medium and high voltage switchgear Serving the oil & gas, industrial, rail, utilities and mining industries Primarily covering the M4 corridor, some staying away from home The Person: Industrial Electrician/Engineer Experience commissioning switchgear Reference number: BBBH24224 Engineer, Engineering, Service, Manufacturing, Production, Servicing, Technician, Field, Mobile, Machinery, Machine, MV, Power, Distribution, Drives, Switchgear, Cardiff, Gloucester, Newport If youre interested in this role, click apply now to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&Cs, Privacy Policy and Disclaimers which can be found at our website.

ELECTRICAL BUILD ENGINEER / ELECTRICAL ASSEMBLY ENGINEER Roles: Electrical Build Engineer / Electrical Assembly Technician Location: Bristol Salary: £Competitive salary plus benefits Electrical Build Engineer / Electrical Assembly Technician ARCA is partnered with a rapidly scaling, high-

Contract: PermanentSalary: Offering up to £42,000 per annum depending on skills and experience.Electrical Maintenance Technician – Banbury STW We currently have an exciting opportunity for an experienced Electrical Maintenance Technician to join our team within the Cherwell area of the Thames Valley North Wastewater Operations Region. This is a fantastic role for someone looking to join a close‑knit, high‑performing team with a wide range of experience and ability, all working to the same high standards. This position offers excellent learning and development potential, including opportunities to cross‑skill across multiple engineering disciplines and broaden your operational knowledge. As the successful candidate, you will be responsible for ensuring that all electrical equipment across our wastewater treatment sites operates safely, efficiently, and reliably. You will use both proactive and reactive maintenance techniques to keep critical assets running and to support the resilience of our sites. What you'll be doing as an Electrical Maintenance Technician • Proactively and reactively maintain the electrical assets across the Cherwell sites., • Investigating plant failures and carrying out repairs as quickly and efficiently as possible to avoid interruptions to the process. This may involve investigating and diagnosing complex faults and carrying out repairs during incidents., • Carrying out service and replacement of assets. Examples of equipment that you will be working on will be various pumps and associated control gear, 3-phase motors, starters and controls, electronic control systems such as VSDs, automatic valves and penstocks, flow, level and pressure measurement, programmable logic controllers, variable speed drives and controls, and chemical handling and dosing equipment., • Supporting the local maintenance teams, carrying out planned and breakdown maintenance activity on electromechanical wastewater assets., • Providing technical advice to the wider team, referring to up-to-date technical knowledge, and providing training or support for technical trainees if required., • Undertake fault diagnostics and have the ability to resolve issues in a timely manner., • Interpret and update Electrical drawings., • Timely feedback on work carried out on daily basis., • Have considerable experience in electrical and systems. A time-served apprenticeship in an engineering sector, NVQ level 3 or greater in electrical engineering., • You will have qualifications in BS7671 or 18thEdition electrical wiring regulations. Experience in maintaining, testing, installing and fault diagnosis on electrical plant equipment safely and efficiently., • Experience with 3-phased systems., • Knowledge and awareness of health and safety policies and processes are essential., • The work will require physical fitness as you will work in confined spaces with successful completion of the appropriate training., • Participation in a 24/7 out-of-hours standby rota will be required after a suitable period of training and assessment, for which you will receive additional payment., • You will need to undertake role-specific training to fulfil any safety and team competency requirements., • A full UK driving licence is essential. We are looking for you to, • Be a self-motivated individual who can immerse themselves into the team around them, you need to be very disciplined, have the desire to learn from those around you and have a can-do attitude. This role can be demanding at times but very rewarding too., • Take Ownership of responding quickly to faults, being curious to fully understand the problem, and identifying the best solution to resolve it the first time., • Have excellent communication and interpersonal skills to interact with the team., • Teamwork – We are one team, and our end goals are the same., • Proactive – take the lead on recommendations and improvements around the site and communicate effectively., • Must be prepared to be trained in safety procedures., • Knowledge and awareness of health and safety standards. What’s in it for you?, • Competitive salary up to £42,000 per annum, depending on skills and experience., • Standby rota payments & Overtime opportunities can increase this earning potential by up to a further £8,000-£10,000 per annum upon completion of essential company training., • 24 days holiday per year increasing to 28 days with the length of service (Plus bank holidays)., • Contributory pension – Defined Contribution - Maximum of 12% -2x employee contribution., • Personal Medical Assessments – Open to all once a year.

Exciting opportunity for Electrical Technicians with experience of high voltage (HV, 11kV / 33kV) testing and maintenance to become a Senior Authorised Person for private networks. Working for an industry-leading organisation with a tremendous reputation for providing superb training and development to its employees, the role will involve: • Carrying out the inspection and maintenance (reactive and planned) of HV and LV equipment up to 132kV, Equipment will include switchgear, transformers, ring main units, busbars, circuit breakers and protection systems, • Plan, carry out and supervise HV switching schedules, ensuring compliance with Company Safety Rules, • Manage fault location and response, diagnosis and repair, • Provide quotations for works, work packages and plans, job instructions and RAMS, • Coordinate the work of Electrical Technicians, supervising junior staff, • Work with clients and other stakeholders to make sure project aims, deliverables and deadlines are met, • After gaining the appropriate authorisation, carry out HV switching and isolations, • Ensure electrical system safety - issue safety documentation in accordance with safety rules and operational procedures, • Test electrical installations, create test reports, • Ensure all projects are conducted to the highest standards of quality and safety Requirements: • Qualification in Electrical Engineering, • Driving licence, • Previous experience working with HV electrical systems, ideally from a maintenance perspective, • Supervisory experience and strong communications skills, • Current or previous HV Authorised Person (AP) or Senior Authorised Person (SAP) status This is a brilliant opportunity for someone wishing to become a Senior Authorised Person in the HV industry. Apply to Andrew Snelgrove at Deploy. • salary based on skills and experience required for the role

Electrical, Energy Feasibility Engineer (Decarbonisation) Bristol - £50,000 - £60,000 The Electrical / Energy Feasibility Engineer supports early-stage decarbonization projects for industrial production sites. The role focuses on assessing electrical and thermal energy supply capabilities, estimating future energy demand, and identifying technical constraints or reinforcements required to enable low-carbon solutions. This position is primarily involved in pre-feasibility and feasibility phases, providing robust technical inputs to guide investment and engineering decisions. Good understanding of Interfaces management. Good understanding of project cost assessment. Key Responsibilities (Summary) • Assess electrical and thermal supply capacity for industrial sites, including demand forecasting for electrification, new equipment, and decarbonization scenarios., • Evaluate existing energy infrastructure, identify constraints or compliance issues, and propose solutions such as grid upgrades, on-site generation, or storage., • Support early project phases by documenting technical assumptions, contributing to feasibility studies, and coordinating with utilities, grid operators, and multidisciplinary teams. Deliverables • Energy supply and capacity assessment notes, • Preliminary load balance and demand estimation summaries, • Constraint and risk identification matrices, • Degree in Electrical Engineering, Energy Engineering, or equivalent, • (Technician / Higher Technician profiles with strong experience are welcome), • Experience in industrial electrical systems, power distribution, or energy infrastructure, • Familiarity with:, • industrial power systems, • grid connection principles, • energy balance and load estimation, • Ability to work with incomplete data and build engineering assumptions, • Experience in decarbonization, electrification or energy transition projects, • Knowledge of industrial utilities (HV/LV, substations, thermal networks), • Awareness of regulatory or grid-connection constraints, • Engineering judgment in early project phases, • Structured problem analysis, • Clear technical communication (written and oral), • Risk and assumption management

Title: Master Auto Technician / Automotive Technical Specialist (B2B) Location: Remote in Midlands, North England hybrid if London based Work style: Field-based ( Fully Remote role if in the Midlands or N. England) Salary up to £55,000 + Car + Bonus + excellent additional benefits Sector : Passenger cars & dealerships Company details You will be joining one of the fastest growing automotive export businesses in the world at a key moment in the transformation of the sector. This is a very exciting role in which you will work for this passenger car business which has experienced stunning growth in the last 2 years. Your role is to essentially to provide the most outstanding level of technical customer care and technical training directly to the dealership network. This role is part of the company’s growth strategy where customer care is at the heart of it's planned growth . The work that you do will directly impact repeat business, dealer reputation and future sales success . Reputation is everything in this sector....not just the provision of a wonderful CAR product, but in the provision of outstanding customer service. This role is 100% field based DUTIES This is a B2B technical support & training role Dealer Communications • Provide a fully field-based technical support to the passenger car Dealer network and create visit reports., • Manage a caseload and liaise with engineers., • Escalate unresolved cases to the appropriate engineering team, • Liaise with Quality Improvement Team and the customer experience team to suggest improvements to the product., • Review technical automotive documentation received from head office., • Create technical presentations and seminars and deliver to on-site technicians, ensuring best practices are shared across the Dealer network., • Create technical service bulletins, troubleshooting guides and training materials., • 5 years of experience in a previous technical role within the automotive sector., • A formal technical or engineering-based qualification or Master Technician experience, • Experience with diagnostic tooling and engineering logging equipment., • Experience in hybrid and electric vehicle systems, • Ability to read and understand engineering drawings, including electrical diagrams., • Full and clean driving licence., • Happy to work fully remotely and field based

LV/HV Technician Location: UK Wide (ideally based in the Midlands or South) Hours: 40 Hours - Monday to Friday At Mitie, our people are our greatest strength, and our promise is to create a place to work where you can thrive and be your best every day. We're looking for an LV / HV Technician (Authorised Person) to carry out the safe operation, maintenance and control of electrical systems across our sites, ensuring compliance with legislation, safety rules and operational procedures. Role Responsibilities • Operate, maintain and isolate LV and HV electrical systems in line with Authorised Person responsibilities, • Ensure all electrical works are carried out safely, following permits to work, switching procedures and risk assessments, • Carry out inspections, fault finding and maintenance to ensure continuity of supply, • Maintain accurate records, logs and compliance documentation, • Act as a technical point of contact, supporting colleagues and contractors on site Required Qualifications • Authorised Person (AP) status for LV and/or HV systems, • Relevant electrical qualification (e.g. 18th Edition, HNC), • Full UK driving licence What we're looking for • Proven experience working with LV/HV electrical systems in an operational or facilities environment, • Strong understanding of electrical safety rules, legislation and safe systems of work, • Ability to work independently and make sound decisions in safety‑critical situations, • Good communication skills and the ability to liaise effectively with internal teams and contractors, • A proactive, professional approach with strong attention to detail What's in it for you? • Ongoing training, development in HV works, • Company Van, Equipment provided

Mechanical Assembly Technician Bristol £37,000 - £41,000 + 33 days holiday + Private Healthcare + Share plan + Pension • 33 days holiday, • Private Healthcare, • Share plan, • Pension The Role: • Carry out the mechanical assembly of advanced technology products., • Contribute to creating and updating documentation that supports Lean manufacturing practices., • Adhere to all requirements outlined in the Bill of Materials (BOM)., • Complete assigned tasks effectively while keeping the Team Leader informed of any material shortages, technical challenges, and actions taken to minimize disruption to production timelines., • Troubleshoot and resolve assembly issues. The Candidate: • Previous mechanical fitting experience., • Ability to read mechanical drawings., • Ability to fault find and implement corrective action., • Happy working shifts. The Benefits: • £37,000 - £41,000 (including shift premium), • 33 days holiday, • Private Healthcare, • Share plan Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business. Job Tenure: Permanent Salary: £37000 - £41000 per annum + 33 days holiday + Private Health + Pension Location: Bristol,

Trainee Field Service Engineer Bristol £28,000 - £35,000 Basic (OTE £42,000) Training Stability Job satisfaction Family - feel Travel paid Profit Share Bonus Company Van Fuel Card Personal use Pension Overtime Door to door Start your career in the medical engineering industry as a Trainee Field Service Engineer, where youll receive full training to become a skilled engineer. This is a great opportunity for someone who wants to make the step to progress their career in a stable and rewarding sector, whilst having the opportunity to earn well through overtime and styaying away allowances. Join a forward-thinking medical equipment supplier as a field service engineer that is growing rapidly and offers excellent support, development, and progression opportunities. Youll work in a varied, hands-on role while maintaining a strong work-life balance and being part of a supportive team. Your Role As A Trainee Field Installation Engineer Will Include: Assisting with installation of medical lifting equipment (e.g. ceiling track hoists) Learning fault finding, servicing, and installation techniques Covering Bristol and surrounding areas Occasional travel & stay away As A Trainee Field Installation Engineer You Will Need To Have: Basic mechanical knowledge (college, apprenticeship, or hands-on experience) A strong willingness to learn and develop Good attitude and reliability Full UK Driving Licence Ability to travel within the Bristol area and stay away when required Physically fit If this sounds like you, call Rebecka Van Ristell on 07458163046 for immediate consideration or apply now. Keywords: Trainee Field Service Engineer, Trainee Installation Engineer, Junior Engineer, Entry Level Engineer, Mechanical, Electrical, Installation Technician, Field Engineer, Mobile Engineer, Medical Equipment, Hoists, Lifting Equipment, Bristol, Bath, Swindon, South West

In this dynamic role, you'll engage in a variety of tasks, from performing planned and reactive maintenance on mechanical and electrical systems to troubleshooting and enhancing maintenance procedures. An exciting opportunity awaits for a Mechanical Maintenance Technician to join a well-known food m

Join our innovative Production team and seize this incredible chance to contribute to the assembly of groundbreaking, high‑tech products. Act as a point of reference to ensure that the technicians within the build area are fully aware of the build sequence. Train and guide less experienced technic

Hunter Selection Limited is seeking an Electrical Assembly Technician to join their growing team in Bristol. Candidates should have an electrical apprenticeship or relevant qualifications, along with soldering and assembly experience.

HGV PDI Electrical Installation Technician**Wanted at Motus Commercials, the largest DAF Trucks Dealer Group in Europe and Largest independent commercial vehicle dealer group in the UK!Here at Motus Commercials we’re proudto employ great colleagues who are passionate about their roles. So