Trabajos machining en RotherhamCrear alertas

Position: Senior Mechanical Design Engineer Location: Sheffield Salary: £40K-60K Our client is seeking a passionate and dynamic Senior Mechanical Design Engineer who is driven by curiosity & precision, who takes an innovative & inquisitive approach & who has the capacity to ‘think outside the box’ to solve problems. This is your opportunity to work on varied & intellectually demanding projects. In this role you will be responsible for product design, development, and detailing utilizing CAD software, calculations, Projects specific areas, machines, technologies and working in close collaboration with Project Engineers to reach assigned targets. Your responsibilities will include: • Being accountable for the completion of 3D modelling, detail design, technical calculations, and product development as assigned by management utilizing the internal software and tools., • Responsibility for assigned portion of product design and development process, ensuring project schedules are maintained while following the Company standards., • Developing the layout of areas of equipment, proposal layout, basic engineering of new mechanical equipment based on Customer requests., • Carrying out complex mechanical calculations., • Participating in commercial / technical (basic and detail design) meetings worldwide. This will involve customer interaction and other business units such as Civil, Piping, Automation, • Assisting Purchasing, Manufacturing, Erection and Commissioning Departments during handling of developed engineering where necessary, • Continuous monitoring on project progress, identify any areas of concern, escalating where necessary and managing customer expectations, • Supporting sales activities through drawing/document creation and on-site reverse engineering of products., • Liaising with representatives from suppliers during technical evaluations of project solutions., • Managing expectations, clarifying requirements and making requests, including submission deadline changes, as required. You will have: • Degree in Mechanical Engineering or equivalent relevant experience., • Proven experience in 2D and 3D CAD required (Autodesk Inventor an advantage but not essential) within an OEM structured engineering department, • Knowledge of metallurgy, material science, heat treatment; specific knowledge in cutting, welding, heat treatment and machining, • Mechanical calculations (NX, MathCAD, Microsoft Excel) - mechanics, stress calculation, resolution of forces, beam calculation., • Free reading of design/technical documentation, • Basic product/plant understanding and know-how (what pieces go where and how to find reference information)., • Relevant experience in heavy engineering and structural design., • Applying geometric dimensioning and tolerancing standards relevant to the component designed., • Fabrication design, welded joint selection, and correct use of welding symbols., • Design for large, machined components including tolerance selection, limits and fits., • Design of original machines considering for correct assembly and maintenance., • Production of clear concise working engineering drawings, accurate bills of material and arrangement drawings. Examples of previous work are helpful., • To operate freely with international documentation: technical books, standards, catalogues etc (AutoCAD, Inventor), • Work in international groups with ability to communicate both verbally and written and work within a worldwide team environment., • Strong analytical and problem-solving ability looking at overall results and finer details., • Ability to prioritise workload, on-time delivery and deliver on-time results to Company standards whilst working on multiple projects., • Experience undertaking structured writing in the form of technical reports., • Available for regular business travel (worldwide)

Are you an experienced CNC Miller looking for your next contract opportunity? Our client, a leading aerospace precision manufacturer based in Sheffield, is seeking skilled CNC Miller to support increased production demand This role involves setting and operating CNC Milling machines using Fanuc controls to produce high-precision aerospace components. Candidates with experience machining exotic materials such as Inconel and working to tight aerospace tolerances will be highly desirable. CNC Miller 3-Month Contract (FTC or Contract – likely inside IR35) Competitive Rates 37 hours per week – Early & Late shifts (continental shifts also available) CNC Miller Job Description • Set and operate CNC Milling machines (Hartford 3+ axis) with Fanuc controls, • Manufacture high-precision aerospace components including structural parts, engine components, and complex machined details, • Work from engineering drawings and job cards to produce components to tight tolerances, • Machine exotic materials such as Inconel, • Carry out drilling, trimming, and finishing operations on formed components (e.g. titanium parts), • Ensure all work is completed in line with aerospace and quality standards CNC Miller Essential Experience/Skills/Qualifications • Proven experience setting and operating CNC milling machines (3-axis or above, Fanuc controls essential), • Strong background in precision machining within aerospace or similarly regulated industries, • Experience machining exotic materials (e.g. Inconel) is highly desirable, • Ability to read and interpret engineering drawings, • Flexible approach to shift work (earlies, lates, or continental), • Must be eligible to work in the UK (ITAR regulated site – no restrictions) CNC Miller Additional Information • Immediate start available following a one-stage, on-site interview with the Head of Production and CNC Team Leader, • Candidates must bring passport and safety boots to interview, • 1 CNC Miller position available, • Candidates must bring passport and safety boots to interview, • Multiple CNC Turner positions available

Are you an experienced CNC Turner looking for your next contract opportunity? Our client, a leading aerospace precision manufacturer based in Sheffield, is seeking skilled CNC Turners to support increased production demand This role involves setting and operating CNC turning machines using Fanuc controls to produce high-precision aerospace components. Candidates with experience machining exotic materials such as Inconel and working to tight aerospace tolerances will be highly desirable. CNC Turner 3-Month Contract (FTC or Contract – likely inside IR35) Competitive Rates 37 hours per week – Early & Late shifts (continental shifts also available) CNC Turner Job Description • Set and operate CNC Turning machines (Toshulin & Doosan) with Fanuc controls, • Manufacture high-precision aerospace components including structural parts, engine components, and complex machined details, • Work from engineering drawings and job cards to produce components to tight tolerances, • Machine exotic materials such as Inconel, • Carry out finishing, drilling, and trimming operations on formed components where required, • Ensure all work is completed in line with aerospace and quality standards CNC Turner Essential Experience/Skills/Qualifications • Proven experience setting and operating CNC lathes (Fanuc controls essential), • Strong background in precision machining within aerospace or similarly regulated industries, • Experience machining exotic materials (e.g. Inconel) is highly desirable, • Ability to read and interpret engineering drawings, • Flexible approach to shift work (earlies, lates, or continental), • Must be eligible to work in the UK (ITAR regulated site – no restrictions) CNC Turner Additional Information • Immediate start available following a one-stage, on-site interview with the Head of Production and CNC Team Leader, • Candidates must bring passport and safety boots to interview, • Multiple CNC Turner positions available

Equipment Maintenance Specialist – Night Shift Sheffield £50,000 - £58,500 including shift allowance A leading advanced manufacturing business is seeking an experienced Equipment Maintenance Specialist to join its night shift engineering team. This is a critical role focused on maximising equipment reliability, limiting downtime and ensuring high precision machinery and production assets are maintained to the highest standards. The Role You’ll be responsible for maintaining and repairing high-spec, high precision CNC machinery and associated production equipment in a fast-paced, precision-driven environment. Working closely with production and engineering teams, you’ll play a key role in minimising downtime and driving continuous improvement across the site. Key Responsibilities • Carry out planned preventative maintenance (PPM) and condition-based servicing on high precision CNC machines and ancillary equipment, • Diagnose and resolve electrical, mechanical, hydraulic and pneumatic faults, • Respond to breakdowns quickly to restore production capability, • Support installation, alignment, calibration and commissioning of new or modified high precision equipment, • Contribute to root cause analysis and implement corrective actions to prevent repeat issues, • Manage spare parts inventory, ensuring critical components are available when needed, • Collaborate cross-functionally to improve overall equipment reliability and performance What We’re Looking For • Multi-skilled maintenance experience with a strong electrical bias, • Proven fault-finding capability across mechanical, hydraulic and pneumatic systems, • Experience working with high precision machinery (e.g. CNC machining environments), • Ability to read and interpret engineering drawings, schematics and PLC/HMI documentation, • Strong communication skills and ability to work cross-functionally, • Comfortable using Microsoft Office tools Desirable Experience • Apprenticeship (Level 3 or equivalent) in Electrical, Mechanical or Electronic Engineering, • Ideally 5-7+ years’ experience in a maintenance role post-apprenticeship, • HNC/HND in Engineering, • PLC/HMI fault finding or programming experience, • IOSH Managing Safely, • Background in aerospace or regulated manufacturing environments (e.g. AS9100) Additional Information • Night shift role (UK-based), • Candidates must already have the right to work in the UK, • No visa sponsorship or relocation support available If you’re a hands-on maintenance engineer with experience supporting high precision machinery and looking to work with cutting-edge manufacturing technology in a highly regulated environment, this is a strong opportunity to step into a technically rewarding and stable role.

Elevation Recruitment Group are proud to be partnering with a large specialist manufacturing business based in Sheffield. Our client is seeking an experienced, hands-on Production Manager to lead their shop-floor operations, overseeing the entire process of manufacturing specialist products, driving continuous improvement, and ensuring high standards for quality, safety, and delivery. Duties of the role: • Oversee day-to-day production activities, managing a large team of Production Supervisors and skilled Operatives., • Plan and schedule production to ensure orders are delivered on time and in full (OTIF), • Champion Lean / CI initiatives to improve efficiency, reduce waste, and drive cost savings, • Ensure compliance with health & safety, quality, and environmental standards, • Collaborate with Engineering, Quality, Planning, and Supply Chain to resolve production bottlenecks - root cause analysis, • Monitor KPIs and generate performance reports to senior leadership, • Develop and coach the production team to build capability and ownership Experienced required: • Proven production management experience in a large, fast paced manufacturing environment (machining style manufacturing preferred), • Strong knowledge of lean manufacturing / CI methodologies (Kaizen, 5S, root cause analysis) - Lean Six Sigma qualifications preferred, • Excellent leadership and people management skills — you can motivate and develop a team, • Strong planning, organisational, and problem-solving abilities, • Experience of working with production planning systems (ERP / MRP) and Microsoft Office, • A solid commitment to health and safety standards, ideally with qualifications (IOSH / NEBOSH) About Elevation Recruitment Group Elevation Recruitment Group is a specialist recruitment consultancy that helps people build long-term, successful careers. We work across a wide range of industries and disciplines with a focus on making recruitment feel more human, more honest and more effective. We are specialists in every function and experts in every hire. Check out our website to find out more.

Senior Mechanical Design EngineerElevation Recruitment are delighted to be partnering with a leading engineering company based in Sheffield, in their search for a Mechanical Design Engineer. Specialising in bespoke structural solutions, our client has earned a reputation for technical excellence and innovation, delivering high-quality engineered systems for infrastructure and construction projects across the UK and internationally. Role Overview We are looking for an experienced and highly capable Senior Mechanical Design Engineer to take a key role within the engineering team. This is a senior-level position that will involve leading design activities, mentoring junior engineers, and taking ownership of complex design challenges. The successful candidate will bring strong technical expertise in mechanical and structural design, particularly in hand calculations, alongside a deep understanding of welding, fabrication, and engineering principles. You will play a pivotal role in ensuring practical, efficient, and robust designs are delivered on time and to the highest standards, supporting both UK and international projects. Key Responsibilities * Lead the design and development of bespoke mechanical components and assemblies, from concept through to manufacture and installation. * Take ownership of detailed hand calculations (stress analysis, joint strength, load assessments, etc.) to validate and optimise designs. * Review and approve technical drawings, models, and documentation produced by junior engineers and CAD technicians. * Provide technical leadership, mentoring, and guidance to less experienced team members. * Collaborate closely with the fabrication team to ensure designs are practical, manufacturable, and compliant with welding/fabrication standards. * Interpret and apply British and international design codes and standards. * Act as a technical authority, providing expert support to project managers, fabricators, and installation teams. * Ensure all work is delivered in line with company quality, safety, and environmental standards. Requirements * Degree (or equivalent) in Mechanical Engineering. * Significant experience in mechanical design engineering, ideally within structural or heavy engineering sectors. * Demonstrable expertise in manual hand calculations for structural and mechanical design. * Strong knowledge of welding principles, weld design, and fabrication processes (machining, cutting, assembly, etc.). * Proficiency in CAD software (SolidWorks preferred). * Good understanding of materials, tolerancing, and manufacturing methods. * In-depth knowledge of BS, EN, and ISO design codes and standards. * Strong communication, leadership, and team mentoring skills. * Excellent problem-solving ability and meticulous attention to detail. Desirable * Experience working on infrastructure or construction projects. * Familiarity with FEA tools (e.g., ANSYS, SolidWorks Simulation). * CSCS card (or willingness to obtain one). What’s on Offer * The opportunity to take a leading role on complex, bespoke engineering projects with tangible real-world impact. * A senior position within a highly skilled and collaborative engineering team. * Competitive salary and benefits package. * Clear opportunities for continued career progression and professional development.For more information, please contact Steve Barnett or Jack Heffren

Position: Centre Lathe Turner Location: Sheffield Rate £16.93 (£34,334 per annum) Centre Lathe Turner required for a well-established specialist supplier of hydraulic and Electric Submersible Pumps. The successful Candidate will be undertaking Setting and Operating Manual Lathes. It is envisioned that the successful candidate will come from a background in Manual Machining with a strong level of ... WHJS1_UKTJ

Key Responsibilities of a CNC Turner: Setting and operating xcunqrw CNC lathes to produce high-quality precision components Machining parts up to. We are currently seeking an experienced CNC Turner to join a well-established precision engineering business based in Sheffield.

The position offers competitive pay, additional allowances for machine operation, and a structured benefits package including holidays and a pension plan.

A leading university in the UK is seeking a Senior Project Engineer to support high-quality machining projects. Responsibilities include conducting engineering tasks, analyzing data, and mentoring junior engineers.

Manual Machinist - Aerospace & Power Generation. We are seeking skilled Manual Machinists to join our client's team, machining centrifugally spun castings for the Aerospace and Power Generation industries. Operate various manual machines, including lathes and horizontal & vertical borers.

A prestigious educational institution in Sheffield is seeking a Technician to support laboratory services in the Faculty of Engineering. The successful candidate will be responsible for designing, manufacturing, and maintaining specialized laboratory equipment, ensuring compliance with health and sa

Effectively programme, set and operate CNC lathes to meet production deadlines and quality standards. Previous experience in a similar CNC turning or machining role. Ability to set or modify existing CNC programs.

MECHANICAL MAINTENANCE ENGINEERS/FITTERS SHEFFIELD DAYS (EARLY FINISH THURSDAY & FRIDAY) + UP TO 10 WEEKS HOLIDAY! £30,000-£40,000, DEPENDING ON EXPERIENCE We are looking for a motivated mechanical maintenance engineer to join a very reputable manufacting company in Sheffield. You will be a key member in ensuring the production facility is kept running. You will be involved in all aspects of planned and reactive maintenance within their operation. With progressive training and development this company is always looking to enhance its employees and their skill sets, whilst additionally being supported by a welcoming team of engineers. The position will appeal to a strong engineer looking for their next challenging role within in a secure and stable company. Role Description - Maintenance & Fitting - Planned & Reactive Maintenance - Hydraulics & Pneumatics - Gearboxes, Belts, Chains, Bearings - CNC Metal Cutting Machinery Skills and Qualifications - Apprentice Trained - Machining and/or Automotive Experience is advantageous - NVQ LV3+ - Mechanical - CNC Machinery Experience is advantageous In return for your commitment my client offers a stable and secure career for a technically motivated engineer. If you feel this is of interest, please call Jordan Hindhaugh for a confidential discussion on (phone number removed) , alternatively you can email for further details on

REED Engineering & Manufacturing are working with leading Engineering & Manufacturing company Key Responsibilities & Skills Machining: Using CNC Lathes to machine parts used within the Aerospace, Oil & Gas and Nuclear sectors working with metals such as Inconel (718), stainless steels and titanium etc Quality Control: Inspecting finished components using precision measuring equipment to meet tight tolerances, often working to AS9100 standards. Materials: Working with aerospace-grade alloys like Aluminium, Stainless Steel, and Inconel. Role Requirements & Qualifications Experience: Proven experience in a high-precision CNC turning environment Controls: Strong working knowledge of either Siemens, Fanuc, Haas, or Mori Seiki controls. Education: Apprenticeship, Qualification or technical training in precision engineering. * Maintaining high house keeping standards and Health & Safety at all times The position also includes a bonus of up to 10% circa £4,200 to £4,800

JRS Associates have partnered up with an exciting precision engineering company in Sheffield to recruit a skilled Manual Turner to join their established and highly capable machining team. This is a fantastic opportunity to join a stable business working on large, complex components within a well-equipped workshop environment. The Successful Manual Turner - Package: • £18.00 – £19.00 per hour, • Monday to Thursday, 6:00am – 4:15pm (4-day working week), • Overtime available at premium rates, • Long-term, stable opportunity within a well-established business, • Supportive team environment with modern workshop facilities The Successful Manual Turner - Requirements: • Proven experience as a Manual Turner within a precision engineering environment, • Strong experience working on small to large components, • Experience using Horizontal Boring machines is highly desirable, • Ability to read and interpret engineering drawings, • Competent using manual measuring equipment (micrometers, verniers, etc.), • Experience working to tight tolerances, • Self-motivated with the ability to work independently and as part of a team, • Strong attention to detail and quality-focused mindset Apply now! Shortlisted candidates will receive a call within 3 hours during working hours to discuss the role further

Job Title: Mechanical Design Engineer Location: Sheffield About the Company Based in Sheffield, this established engineering business specialises in the design, manufacture, and installation of structural movement control systems and bespoke mechanical solutions for infrastructure projects. The company delivers high-quality engineered products used in bridges, highways, rail, commercial buildings, and large-scale civil engineering projects across the UK and internationally. With in-house design, fabrication, and project delivery capabilities, the organisation is known for producing technically robust, practical solutions that meet demanding structural and environmental performance standards. Projects range from complex steel fabrications to engineered mechanical assemblies that accommodate structural movement, load transfer, and long-term durability in challenging environments. Due to continued growth and project demand, the company is seeking a skilled Mechanical Design Engineer to join its engineering team in Sheffield. Role Overview We are looking for a capable and detail-driven Mechanical Design Engineer (Senior or Lead level considered depending on experience) to support the design and development of bespoke structural and mechanical systems. This role requires strong technical competence, particularly in manual hand calculations, structural mechanics, welding design, and fabrication processes. The successful candidate will take ownership of designs from initial concept through to manufacture, installation, and post-project review — ensuring solutions are safe, efficient, and compliant with relevant standards. This is a hands-on engineering role suited to someone who enjoys practical design challenges and seeing projects through from cradle to grave. Key Responsibilities • Design and develop bespoke mechanical components and structural assemblies from concept through detailed design, manufacture, installation, and post-installation feedback, • Perform detailed hand calculations including:, • Stress and deflection analysis, • Bolted and welded joint design, • Load and fatigue assessments, • Bearing pressures and structural capacity checks, • Produce and review detailed technical drawings, 3D models, and manufacturing documentation using CAD software (SolidWorks, Inventor, AutoCAD), • Ensure designs are manufacturable by collaborating closely with in-house fabrication and welding teams, • Apply relevant British and international design standards (BS, EN, Eurocodes, ISO), • Support project managers with technical input during tender, planning, and delivery stages, • Provide technical guidance during installation and resolve on-site engineering queries where required, • Contribute to continuous improvement by incorporating lessons learned into future design iterations, • Ensure full compliance with quality, health & safety, and environmental standards For Senior / Lead level candidates: Review and approve designs from junior engineers Provide technical mentorship and leadership Lead complex or high-value engineering projects Represent the engineering function in client and project meetings Requirements • Degree-qualified in Mechanical Engineering or related discipline, • Demonstrable experience in mechanical or structural design engineering, • Strong capability in manual engineering calculations (essential), • Sound understanding of welding design, weld symbols, and fabrication processes (cutting, machining, assembly), • Proficiency in CAD software (SolidWorks preferred), • Good understanding of materials selection, tolerancing, and manufacturing techniques, • Familiarity with BS, EN, Eurocode, and ISO standards, • Excellent analytical and problem-solving skills, • Strong communication and collaboration abilities Desirable Experience working on infrastructure, civil engineering, or construction projects Familiarity with FEA tools (ANSYS, SolidWorks Simulation) Chartered Engineer status (or working towards) 5+ years of industry experience (more for Senior/Lead level) What’s on Offer • Opportunity to work on technically challenging, bespoke engineering projects with visible real-world impact, • A collaborative and experienced engineering team environment, • Exposure to full lifecycle engineering, from concept through to site installation, • Competitive salary and benefits package, • Clear progression opportunities into Senior or Lead roles, • Professional development support If you are a motivated Mechanical Design Engineer looking to work on challenging, real-world infrastructure projects and take ownership of designs from concept through to installation, we would love to hear from you

Job Title: CNC Turner Setter/Operator Location: Sheffield Salary: £25.00 - £30.00 per hour Hours: 37 hours per week basic, various shifts available Contract type: 3 Month Contract The Opportunity: EMBS Engineering is seeking a skilled and motivated CNC Turner to join a well-established and forward-thinking precision engineering company based in Sheffield. This opportunity involves working with advanced multi axis CNC machinery to produce high-quality components for globally recognised clients. It is an excellent role for an experienced CNC Setter. What the role offers: Excellent pay £25.00 - £30.00 per hour Various shifts available: 2 shift pattern - Mornings & afternoons rotating weekly 3 shift pattern - Mornings, afternoons and nights rotating weekly 37 hours per week basic + overtime 3 month contract - potential to extend Key Responsibilities: Setting and operating CNC turning machines using Fanuc controls to produce high-quality components for highly regulated, advanced manufacturing industries Performing routine manual maintenance checks, including monitoring oil and coolant levels Conducting visual inspections of machined parts to ensure they meet required standards Essential Requirements: Able to set and operate Turning Machines Background working with metallic components, ideally within regulated sectors such as aerospace, oil & gas, or nuclear Experience in machining high-performance materials such as Inconel Confident performing multiple set ups per day Ability to work to tight tolerances Ability to read and interpret engineering drawings Strong work ethic with a flexible and adaptable approach Positive attitude with the ability to integrate well into an established team This position requires the successful candidate to undergo UK security clearance. To be considered for this role, applicants must meet the above essential requirements. Please note that due to the security clearance requirements, we are unable to sponsor visas for this position. How to Apply: If you are a skilled CNC Setter with relevant experience, we encourage you to apply. Please click the link below to submit your application. About us: EMBS Engineering is a dedicated talent specialist partnering with leading UK companies across diverse, advanced precision engineering sectors, including Aerospace, Automotive/Motorsport, Nuclear, Oil & Gas, Green/Environmental, and FMCG. We are committed to providing expert support and guidance throughout your job search to help you secure a career-defining role

An established precision engineering manufacturer is looking to recruit Surface Grinders to join its production team, operating on a 4-day days shift/3-day night shift pattern. This role offers the opportunity to work within a high-precision machining environment, producing components to tight tolerances while contributing to quality and productivity targets. You will be responsible for operating manual grinding machinery within a busy production facility. Key responsibilities: Operate a range of surface grinding machines (line, segmental and end grinding) * Work to tight tolerances and high-quality standards * Carry out machine set-ups, including wheel changes and fixture adjustments * Select appropriate grinding wheels for different materials * Support improvements in tooling, fixtures and production processes * Maintain high standards of health & safety and housekeeping on the shop floor * Work independently or across multiple machines where requiredAbout You Apprentice trained or equivalent hands-on experience in grinding / machining * Strong understanding of precision engineering and tight tolerances * Ability to read and interpret complex engineering drawings and tolerances * Experience working with a range of materials, including hardened steels * Capable of completing full machine changeovers and set-ups * Proactive, reliable and motivated with a strong work ethic * Team player with good communication and problem-solving skills * Willingness to learn, develop and adapt within a manufacturing environmentWorking Pattern Days & Nights weekly rotation - Days: Monday - Thursday (4-day week) & Nights: Monday - Wednesday (3-night week) What's on Offer Competitive hourly rates depending on experience * Additional shift premium and machine operation allowances * Overtime available (typically 10-15%) * Annual profit-related bonus scheme * Company pension * 23 days holiday + bank holidays (increasing with service) * Cycle to work scheme * Free onsite parking and workwear * Short working week with strong work-life balanceAbout Us We are dedicated to fostering a diverse and inclusive community. In line with our Diversity and Inclusion policy, we welcome applications from all qualified individuals, regardless of age, gender, ethnicity, sexual orientation, or disability. As a Disability Confident Employer, and part of the Nicholas Associates Group, we are committed to supporting candidates with disabilities, and we're happy to discuss flexible working options. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Nicholas Associates Group of companies

CNC Machinist Lodestone Recruitment is currently partnered with a local manufacturer for the medical sector. Due to an increase in work, they seek skilled CNC Machinists for their Sheffield facility. This is an excellent opportunity to work in a precision engineering environment producing high-quality medical components. The Role As a CNC Machinist, you will be responsible for setting and operating CNC machines to manufacture orthopaedic medical components. You’ll work with high-spec materials in a regulated environment where quality and accuracy are critical. Key responsibilities include: * Setting and operating CNC machines (Milling and/or Turning considered) * Working to tight tolerances and detailed engineering drawings * Conducting in-process inspection using measuring equipment * Ensuring adherence to quality standards and regulatory requirements * Maintaining a clean and safe working environment Working Hours (37.5 hours per week) Rotating shifts (Monday to Friday, no nights): * Days: 6am – 2pm (Mon–Thurs), 6am – 11:30am (Friday) * Afternoons: 1:45pm – 10pm (Mon–Thurs), 11:15am – 3:45pm (Friday) Benefits * Salary - £36k * 27 days annual leave + bank holidays, increasing to 32 days with service * (3 days reserved for Christmas shutdown) * Company pension (Aviva, salary sacrifice) – 4% employer / 4% employee contribution after 3 months * Free onsite parking * 3-month probation period Upon successful completion of probation: * Life Assurance (2x salary) * Westfield Health Cash Plan (Level 5) * Cycle to Work Scheme * Employee Assistance Programme (EAP) About You We’re looking for candidates who: * Must be Apprentice trained or Time-served * Have experience in CNC Machining (setting and operating with basic editing) * Can read and interpret engineering drawings * Have experience working to tight tolerances * Are quality-focused and detail-oriented * Are reliable and able to work rotating shifts Location Based in North Sheffield with good links to M1, with plentiful free onsite parking. Apply Now If you are an experienced CNC Machinist looking for your next opportunity in the Sheffield area, apply today for immediate consideration. Lodestone Recruitment Ltd is acting as an employment agency in relation to this vacancy

Forde Recruitment, the leading provider of engineering staff within South Yorkshire, are currently seeking an experienced, ideally apprentice served CNC Turner with iGuide programming experience. The CNC Turner will be responsible for: Read and interpret engineering drawings. Create, download, edit, archive, read and interpret CNC programs. Use CNC turning machines Inspection and recording of all relevant dimensions. Completion of all documentation and record labour bookings. Basic machine maintenance. The successful candidate will have: Good and demonstratable knowledge of appropriate tooling. Good and demonstratable knowledge of appropriate cutting & machining conditions. Good and demonstratable knowledge of using measuring equipment. Engage well with other Team Members. Hours: 39 hours per week Rotational Shifts: Days • Mon - Thurs - 06.00 - 14.35 & Fri - 06.00 - 12.00 Nights, • Mon Weds 16:00 02:20 & Thurs 16:00 01:20 (x1.5 premium applies for nights) Salary: Salary circ.£45k to £55k (dependent upon shift pattern and experience) If you possess the necessary skills and qualities to thrive as a CNC Machinist / Milling & Turning Operator, we invite you to apply today! This vacancy is being advertised on behalf of Forde Recruitment Ltd who are operating as an Employment Business. Unfortunately, due to the high volumes of applications we are currently receiving, we are only able to contact candidates who are successful in progressing to the next stage. If you have not been contacted within 7 days of your application, then please presume that you have not been successful on this occasion and continue to search on our website for future vacancies." TPBN1_UKTJ

Inspector / Machinist Salary: £17.70 per hour plus shift allowance at 12.5% Hours: 37.5 hours per week Shifts: Rotational shifts: Days & Afternoons Location: Sheffield, S9 Contract: Full-Time | Permanent The Role: We're looking for a highly detail-focused Inspector / Machinist to support inspection and CNC machining processes, ensuring all products meet strict medical and customer specifications. Key Responsibilities: Perform visual and dimensional inspections Complete DIR reports and OGP scanning Use precision measuring equipment (callipers, verniers, micrometers) Record results accurately in Excel and internal systems Reject and quarantine non-conforming product Set, load, and operate CNC machines Verify parts against engineering drawings and tolerances Complete route cards, inspection sheets, and traceability documentation Escalate quality or machine issues promptly Support Lean, 5S, and EHS initiatives Essential Criteria: Proven experience in CNC machining and/or inspection Strong ability to use measurement tools (verniers, callipers, micrometres) Ability to read and interpret engineering drawings & GD&T Experience working to tight tolerances Good working knowledge of quality control processes Competent in Microsoft Excel and basic IT systems Strong attention to detail and problem-solving ability Desirable Criteria: Experience within medical device, aerospace, or other regulated industries Familiarity with OGP / CMM inspection equipment Knowledge of ISO 13485 or similar quality standards Previous experience with traceability and batch control Understanding of Lean Manufacturing / Continuous Improvement Apprenticeship or relevant engineering qualification (NVQ Level 2/3 or equivalent) Behavioural & Performance Criteria: Demonstrates a 'right first time' quality mind set Strong accountability and ownership of work Ability to work independently and as part of a team Effective communication skills across departments Flexible approach to shift work and production demands Commitment to health, safety, and compliance standards Why Apply? Competitive hourly rate with structured shifts Join a globally recognised manufacturer Work on life-changing products Clear pathway to develop within precision engineering & quality TPBN1_UKTJ

Manual Machinist £16.00ph - £18.00ph Rotherham Days only moving to Afternoons 12 Week Temporary - Permanent Metalis are working with a manufacturing company based in Rotherham who are looking for an experienced Machinist to join the team. Your primary responsibility will be centre lathe turning, focusing mainly on straight bar turning to wide tolerances, predominantly on nickel alloys (though other materials are also machined). As a subcontract environment, productivity, accuracy, and reliability are key. Duties & Responsibilities: Set up and operate machine tools including heavy-duty Centre Lathes, Borers, Mills, and Bandsaws Carry out centre lathe turning to specified tolerances Read and interpret engineering drawings and blueprints Select appropriate tooling and machining methods to meet job specifications Measure and inspect components to ensure accuracy and quality Perform minor machine maintenance and adjustments to keep equipment running efficiently Work collaboratively within a team committed to quality, safety, and continuous improvement Undertake any other reasonable duties within your capabilityShifts & Salary: Days initially then moving to afternoons £16.00ph - £18.00ph 8am - 4pm, Monday - Friday (Days) 2pm - 10pm Monday - Friday (Afternoons) Overtime AvailableThe ideal candidate will have: Previous Machining Experience Ability to read technical drawings and use precision measuring tools Strong mechanical aptitude and attention to detail Desire to produce quality work with prideIf this role is of interest, please give our office a call and one of our experienced consultants will be in touch

We are recruiting for a Mechanical Maintenance Fitter (nights only - 10pm - 6am) to join our client's team of Mechanical Engineers. The role is to provide assistance in the development of the company's reliability-based maintenance strategy in working independently and with other plant personnel to perform preventative, predictive, and routine maintenance tasks. Principle Accountabilities: Troubleshooting, repair and replacement of the mechanical systems in a timely and logical manner. Assist other maintenance personnel with equipment repairs and research. Assist in the development of critically centred preventative and proactive maintenance regimes. Carry out mechanical installations and the decommissioning of redundant machines. To maintain equipment information and service files, including the involvement in spare parts management, data entry and procurement. Liaise with and assist in the managing of third-party contractors including issuance of Permit to Works. Liaise and engage with stakeholders at all levels. The successful candidate will have the following skills/experience: Experience in an engineering discipline. Experience of maintaining machinery and equipment (vertical borers, lathes etc). Flexible attitude towards selection of tasks. The ability to read engineering drawings. Willingness to cross train with colleagues. Experience of working in a proactive maintenance department. Experience of working in a machining facility. Hold a recognised mechanical apprenticeship. Good H&S and environmental awareness. Good communication skills, both written and verbal. Competent working with Microsoft Office (Excel & Word). Please apply for immediate consideration. At Adept Resourcing - Commercial & Engineering, we specialise in connecting companies with top talent that drives innovation, growth and success. With our industry expertise, extensive network and personalised approach, we're here to help you. TPBN1_UKTJ

CNC VERTICAL BORER We are recruiting for a Vertical Borer to work for our client who are located in Sheffield, South Yorkshire. THE DUTIES OF A VERTICAL BORER: * Setting and operating vertical borer * Machining parts / face /edge / bore * Reading engineering drawings ESSENTIAL EXPERIENCES & SKILLS: * Minimum 2 years' experience working within a high precision manufacturing background * Excellent communication skills THE HOURS: Working on Nights: Monday – Thursday 4:30pm – 2:30am Overtime is x 1.5 THE PAY: You will earn an annual hourly rate of £23.20. Questech Recruitment is a specialist engineering support within the Mechanical & Engineering industry, our focus is to support many clients within the M&E Sectors. If you feel you match the desired criteria, or you would like more information on roles such as CNC Machinist , CNC Programmer, CNC Setter , CNC Operator, we would really like to hear from you.#CNC #CNCProgrammer #fanuc #CNCSetter #CNCOperator #heidenhein #hurco #cmm #inspection

CNC Programmer / Manufacturing Engineer Location: Sheffield Salary: £38,000 - £42,000 + Overtime & 15% Pension Shift: Double Days (6am-2pm / 2pm-10pm) Early Finish Friday! The Opportunity We are recruiting on behalf of a well-established and forward-thinking manufacturing business experiencing continued growth. This is an excellent opportunity for an experienced CNC Programmer to take ownership of programming processes and play a key role in driving efficiency, quality and continuous improvement across the shop floor. Key Responsibilities Take full ownership of CNC programs including creation, prove-out, optimisation and revision control Program and edit using Fanuc and/or Siemens controls (training provided where required) Utilise CAD/CAM systems (SolidCAM) alongside on-machine programming Support efficient, repeatable production through continuous improvement Select appropriate tooling, speeds and feeds across a range of materials Troubleshoot and resolve machining issues on the shop floor Maintain accurate records and support quality processes Work closely with production teams to improve machining performance Skills & Experience Strong CNC programming experience (Fanuc or Siemens) Background in CAD/CAM systems (SolidCAM desirable, training available) Confident with tooling selection and machining parameters Practical, hands-on approach with strong problem-solving ability Good communication skills and ability to work cross-functionally Understanding of CMM, oils/coolants and machining processes (training provided where needed) Willingness to learn and attend training courses What's on Offer £38,000 - £42,000 basic salary Overtime and/or shift allowance available 15% Pension 24 days holiday + bank holidays + birthday off (increasing with service) Early finish every Friday Private healthcare and strong wellbeing support Industry-leading training and clear progression opportunities Long-term career stability within a growing business Additional Information This role is due to continued growth within the business Structured training both in-house and externally Clear reporting line and support from management TPBN1_UKTJ

Quality Engineer Days Role Permanent Shillito Group are working with a well established, highly regulated manufacturing business looking to strengthen their quality function with an experienced Quality Engineer. This is a hands on role, working closely with production and engineering to improve quality performance, reduce defects, and ensure processes are controlled and compliant. The Role Maintain a strong shopfloor presence, ensuring quality is controlled at source Lead root cause investigations (8D, 5 Whys, DMAIC) and implement corrective actions Drive continuous improvement across scrap, rework and process capability Analyse data to identify trends and areas for improvement Apply statistical methods (SPC, Cp/Cpk, MSA) to strengthen process control Support validation activities (IQ/OQ/PQ) where required Ensure compliance with quality standards and regulatory requirements Support audits (internal, customer and regulatory) Work cross-functionally to implement sustainable improvements Develop and improve SOPs and quality documentation Support customer issue resolution and improve overall performance What They're Looking For Background in manufacturing / engineering quality Strong problem-solving capability with a structured approach Experience using data and statistical tools to drive improvement Understanding of working within regulated environments Able to influence across teams and drive change on the shopfloor Comfortable being hands on and visible in production Additional Experience (Desirable) Precision engineering or machining environments Knowledge of validation processes Experience with CMM or measurement systems Exposure to highly regulated industries Why It's Worth a Look Stable, growing manufacturing environment Strong investment in equipment and capability Opportunity to make a visible impact on quality performance Salary up to £36k Days based role Shillito Group is a specialist recruitment and executive search partner, working with ambitious businesses to secure high-impact talent across commercial and engineering markets. Our reputation is built on deep expertise, trusted relationships and delivering results that go beyond the brief

We are partnering with a reputable and growing furniture manufacturer seeking an experienced Production Manager to take ownership of shop floor operations. This is a pivotal role responsible for leading a medium-sized team, driving efficiency, and ensuring high-quality craftsmanship across all production activities. As Production Manager, you will oversee the end-to-end manufacturing process across woodworking, assembly, and finishing areas. You will play a key role in improving processes, reducing waste, and implementing Lean methodologies to enhance productivity and quality. Roles & Responsibilities: Lead, manage, and develop a medium-sized shop floor team Oversee daily manufacturing operations, ensuring production schedules, quality standards, and delivery deadlines are consistently met Drive continuous improvement initiatives using Lean manufacturing principles Implement and sustain Lean tools such as 5S, Kaizen, waste reduction, and process standardisation Monitor and improve KPIs including productivity, yield, rework, and on-time delivery Ensure high standards of craftsmanship and product quality, particularly across joinery, upholstery, and finishing processes Work closely with design, planning, and supply chain teams to optimise workflow and material availability Manage labour planning, training, and performance management across the team Maintain strict adherence to health & safety standards within a workshop environment The Ideal Candidate Proven experience as a Production Manager / Manufacturing Manager within furniture manufacturing, joinery, or wood-based production Strong understanding of shop floor operations, including machining, assembly, and finishing processes Demonstrable experience implementing Lean manufacturing and continuous improvement initiatives Hands-on leadership style with the ability to engage and motivate teams Ability to balance production output with high standards of craftsmanship Qualifications Formal Lean / Continuous Improvement qualification (e.g. Lean Six Sigma Green Belt or higher) Relevant qualification in manufacturing, engineering, or furniture production (or equivalent hands-on experience) Experience in bespoke or high-end furniture manufacturing Six Sigma Black Belt Experience working with ERP/MRP systems

A global engineering leader is strengthening its senior design capability on large‑scale, bespoke mechanical systems used worldwide. High technical challenge, proper CAD/analysis ownership, and the stability of long‑term capital projects - away from short‑cycle, low‑impact design work. Accountability and Responsibility: Accountable for the completion of 3D modelling, detail design, technical calculations, and product development as assigned by management utilizing the internal software and tools. Responsible for assigned portion of product design and development process, ensuring project schedules are maintained while following the Company standards. Coordinate and mentor the Designer Engineers, whilst maintaining responsibility for Projects within specific areas, working closely with Project Engineers to reach assigned target Develop the layout of areas of equipment, proposal layout, basic engineering of new mechanical equipment based on Customer requests Carry out complex mechanical calculations Oversee Design Engineers during detail engineering stage Participate in commercial / technical (basic and detail design) meetings worldwide. This will involve customer interaction and other business units such as Civil, Piping, Automation Assist Purchasing, Manufacturing, Erection and Commissioning Departments during handling of developed engineering where necessary Continuous monitoring on project progress, identify any areas of concern, escalate where necessary and manage customer expectations Coordinate inputs to ensure a winning strategy is clearly communicated and documented. On time delivery of technical documents; in the desired medium (portal upload and/or electronic/hard copies, etc). Ensure technical documents, relevant project related information, MoMs, etc, are recorded and filed correctly on the server. Support sales activities through drawing/document creation and on-site reverse engineering of products. Liaison with representatives from suppliers during technical evaluations of project solutions. Manage expectations, clarify requirements and make requests, including submission deadline changes, as required. Support sales and prepare the data analysis and collection before the project start.Qualifications & Experience: Degree in Mechanical Engineering or equivalent relevant experience. Minimum of 7 years' experience in 2D and 3D CAD required (Autodesk Inventor an advantage but not essential) within an OEM structured engineering department Metallurgy, material science, heat treatment; specific knowledge in cutting, welding, heat treatment and machining Mechanical calculations (NX, MathCAD, Microsoft Excel) Free reading of design/technical documentation To operate freely with international documentation: technical books, standards, catalogues etc (AutoCAD, Inventor) Work in international groups with ability to communicate both verbally and written and work within a worldwide team environment. Strong analytical and problem-solving ability looking at overall results and finer details. Ability to prioritise workload, on-time delivery and deliver on-time results to Company standards whilst working on multiple projects. Experience undertaking structured writing in the form of technical reports. Available for regular business travel (worldwide) Basic product/plant understanding and know-how (what pieces go where and how to find reference information)

Reed Engineering & Manufacturing are working with a successful Engineering company, who are growing year on year and due to growth are looking for a Technical Sales Engineer. Key Job Specifications & Responsibilities Technical Quoting: Confidently interpret technical drawings, CAD files, and specifications to generate accurate, competitive quotations. Business Development: Proactively identify and secure new business while maintaining relationships with existing clients. Technical Knowledge: Deep understanding of subcontract machining processes (turning, milling, grinding) and, ideally, working with materials like carbon, stainless and alloy steels etc Customer Relationship Management (CRM): Act as the technical consultant for clients, providing advice on manufacturing feasibility. Project Coordination: Liaise with production teams, subcontractors, and material suppliers to manage timelines, costs, and quality. Sales Pipeline Management: Track inquiries, quotes, and wins to achieve sales targets. Required Skills and Qualifications Experience: Proven experience in technical sales, specifically within the subcontract machining or precision engineering sectors. Technical Ability: Strong understanding of engineering drawings and CAD. Interpersonal Skills: Excellent communication, negotiation, and relationship-building abilities. Qualification: Background in mechanical engineering or related technical sales field in SUBCONTRACT machining is ESSENTIAL. The position includes a competitive bonus structure, private healthcare, company car, pension etc

CNC Turner A skilled CNC Turner is needed to programme, set and operate lathes to produce precision-engineered parts to high quality standards, using FANUC or Siemens controls, engineering drawings and inspection equipment. If you’ve also worked in the following roles, we’d also like to hear from you: CNC Lathe Programmer, CNC Setter, CNC Machine Operator, Precision Machinist, CNC Machinist, CNC Turner, CNC Setter, Setter/Operator, CNC Setter Operator, CNC Programmer, CNC Turning Operative, Milling and Turning Machinist, CNC Engineer, Milling Engineer SALARY: £16.72 - £18.78 per hour (depending on experience) + Overtime + Benefits (weekly pay) LOCATION: Rotherham, South Yorkshire JOB TYPE: Full-Time, Permanent WORKING HOURS: Day Shift hours - 39 hours per week, 7am – 4pm Monday to Thursday, 7am – 12pm Friday JOB OVERVIEW We have a fantastic new job opportunity for a CNC Turner to join a busy precision engineering environment producing high specification component parts and assemblies. As a CNC Turner you will programme, set and operate lathes, machine exotic materials, read complex engineering drawings and carry out quality checks using measuring equipment and basic CMM. This CNC Turner role suits a capable machinist with a strong work ethic, good communication skills and a commitment to continuous improvement, teamwork and high manufacturing standards. APPLY TODAY Ready to make your next career move? Apply Now for our Recruitment Team to review. DUTIES Your duties as the CNC Turner include: • Programming and Setting Lathes: effectively programme, set and operate CNC lathes to meet production deadlines and quality standards, • Machining Exotic Materials: machine materials such as 625 and 718 using FANUC or Siemens control systems, • Reading Engineering Drawings: interpret complex engineering drawings and manufacture components to specification, • Modifying Existing Programs: set or amend existing programs where required to support production, • Quality Inspection: use measuring equipment and basic CMM to complete checks and maintain accuracy, • Tooling Improvements: implement minor tooling changes and suggest major improvements where appropriate, • Process Improvement Support: identify and suggest process improvements to the engineering department, • Team Support: assist and instruct colleagues when needed across the machining team, • Machine Loading and Monitoring: load varying size components safely and competently and monitor long cycle times CANDIDATE REQUIREMENTS ESSENTIAL • Previous experience in a similar CNC turning or machining role, • Experience with FANUC or Siemens control systems, • Able to understand complex engineering drawings, • Able to set or modify existing CNC programs, • Confident using measuring equipment and basic CMM, • Able to work alone and as part of a team, • Excellent communication skills and reliable timekeeping, • Willingness to follow management direction and achieve results DESIRABLE • NVQ Level 3 in Engineering or equivalent, • Enthusiasm to learn and contribute ideas for process improvements BENEFITS • Weekly pay and Regular Overtime, • 32 days paid annual leave (includes Bank Holidays), • Monthly profit sharing bonus scheme (after qualifying period), • Enhanced Company Pension Scheme, • Level 1 Health Care Scheme, • Uniform & PPE provided, • Modern working environment with secure onsite parking HOW TO APPLY To be considered for this job vacancy, please submit your CV to our Recruitment Team who will review your details. CV’s of Job Applicants meeting this requirement will be submitted to our Client for consideration. By submitting your job application to us you are hereby giving us your express consent to submit your details to our Client for this purpose. JOB REF: AWDO-P14628 Full-Time, Permanent Manufacturing Jobs, Careers and Vacancies. Find a new job and work in Rotherham, South Yorkshire. Multi-Job Board Advertising and CV Sourcing Recruitment Services provided by AWD online. AWD online specialise in sourcing candidates and advertising vacancies on multiple job boards for companies on a non-commission basis. AWD online operates as an employment agency. awd online | AWD-IN-SPJ

Reed Engineering & Manufacturing are working with a successful Engineering company, who are growing year on year and due to growth are looking for a Technical Sales Engineer. Key Job Specifications & Responsibilities Technical Quoting: Confidently interpret technical drawings, CAD files, and specifications to generate accurate, competitive quotations. Business Development: Proactively identify and secure new business while maintaining relationships with existing clients. Technical Knowledge: Deep understanding of subcontract machining processes (turning, milling, grinding) and, ideally, working with materials like carbon, stainless and alloy steels etc Customer Relationship Management (CRM): Act as the technical consultant for clients, providing advice on manufacturing feasibility. Project Coordination: Liaise with production teams, subcontractors, and material suppliers to manage timelines, costs, and quality. Sales Pipeline Management: Track inquiries, quotes, and wins to achieve sales targets. Required Skills and Qualifications Experience: Proven experience in technical sales, specifically within the subcontract machining or precision engineering sectors. Technical Ability: Strong understanding of engineering drawings and CAD. Interpersonal Skills: Excellent communication, negotiation, and relationship-building abilities. Qualification: Background in mechanical engineering or related technical sales field in SUBCONTRACT machining is ESSENTIAL. The position includes a competitive bonus structure, private healthcare, company car, pension etc TPBN1_UKTJ

Job Title: CNC Miller Setter/Operator Location: Sheffield Salary: £25.00 - £30.00 per hour Hours: 37 hours per week basic, various shifts available Contract type: 3 Month Contract The Opportunity: EMBS Engineering is seeking skilled and motivated CNC Millers to join a well-established and forward-thinking precision engineering company based in Sheffield. This opportunity involves working with advanced multi axis CNC machinery to produce high-quality components for globally recognised clients. It is an excellent role for an experienced CNC Setter. What the role offers: Excellent pay £25.00 - £30.00 per hour Various shifts available: 2 shift pattern - Mornings & afternoons rotating weekly 3 shift pattern - Mornings, afternoons and nights rotating weekly 37 hours per week basic + overtime 3 month contract - potential to extend Key Responsibilities: Setting and operating CNC milling machines using Fanuc controls to produce high-quality components for highly regulated, advanced manufacturing industries Performing routine manual maintenance checks, including monitoring oil and coolant levels Conducting visual inspections of machined parts to ensure they meet required standards Essential Requirements: Able to set and operate multi-axis milling machines using Fanuc controls Background working with metallic components, ideally within regulated sectors such as aerospace, oil & gas, or nuclear Experience in machining high-performance materials such as Inconel Confident performing multiple set ups per day Ability to work to tight tolerances Ability to read and interpret engineering drawings Strong work ethic with a flexible and adaptable approach Positive attitude with the ability to integrate well into an established team This position requires the successful candidate to undergo UK security clearance. To be considered for this role, applicants must meet the above essential requirements. Please note that due to the security clearance requirements, we are unable to sponsor visas for this position. How to Apply: If you are a skilled CNC Setter with relevant experience, we encourage you to apply. Please click the link below to submit your application. About us: EMBS Engineering is a dedicated talent specialist partnering with leading UK companies across diverse, advanced precision engineering sectors, including Aerospace, Automotive/Motorsport, Nuclear, Oil & Gas, Green/Environmental, and FMCG. We are committed to providing expert support and guidance throughout your job search to help you secure a career-defining role

Climb Recruitment is proud to be working with a leading company in Sheffield Role: Manual Machine Operator (Manual Machinist). The primary requirement for this role is to machine components to a very high standard to satisfy customer requirements and quality specifications. Key duties and responsibilities include: • Manufacturing components from engineering drawings while adhering to company Quality procedures., • Maintaining housekeeping standards for a safe and clean working environment., • Interpreting engineering drawings to customer specifications to produce components within estimated production times., • Machining high-grade materials, such as Inconel 718. The ideal candidate will possess strong attention to detail, good communication skills, and a flexible approach to problem-solving. Experience of operating manual lathes. Working knowledge of relevant tooling applications and machine tool capability including tool feed and speeds required to achieve efficient cycle times This position involves a one-week rotation of days and nights

Sander/Saw Operative Salary: £12.71ph - £15.89ph Days & Afternoons Rotherham S60 Temp-Perm Metalis are working alongside a prestigious manufacturing company who provide critical parts into engineering sectors including marine, aerospace and oil & gas. Due to continuous growth, they are looking for a skilled Sander/Saw Operative to join their team in Rotherham. Duties & Responsibilities: Operate sanding and cutting equipment (e.g., belt sanders, orbital sanders, band saws, and circular saws) to shape and finish engineered components to specification. Prepare and process metal, plastic, or composite parts by sanding edges, deburring surfaces, and cutting materials to required dimensions. Read and follow engineering drawings, job sheets, and production instructions to ensure accurate cutting and finishing. Inspect finished parts to ensure they meet quality standards and report any defects or inconsistencies. Carry out routine maintenance and basic adjustments on sanding and sawing machinery to ensure safe and efficient operation. Adhere to all health and safety procedures, including the correct use of PPE and safe handling of tools and materials. Maintain a clean and organised workstation in line with workshop and 5S standards. Work collaboratively with fabrication, machining, and assembly teams to meet production deadlines. Assist with general workshop duties such as material handling, stock organisation, and supporting other manufacturing processes when required.Requirements Previous experience operating sanding and/or cutting machinery in an engineering, manufacturing, or workshop environment (preferred). Ability to read and follow basic engineering drawings, job sheets, and work instructions. Ability to use basic measuring tools such as tape measures, verniers, or gauges. Good manual dexterity and confidence using hand and power tools.Shifts & Salary: £12.71ph + 25% shift allowance for afternoons (£15.89ph) Days & Afternoons rotating Monday - Friday 6am - 2pm £12.21ph Monday - Thursday 2pm - 11pm £15.26ph Rotherham 12 Week Temporary - Permanent Opportunity If you're interested in this role and you think you'd be a suitable fit, please apply and a member of the team will be in touch

Job Title: CNC Setter Operator Location: Rotherham, S60 (Close to Meadowhall, Sheffield) Salary: £27,885- £42,900 (Depending on experience) Contract: Full-time, Permanent Hours: 3-shift rotation (Monday to Friday): 6:00 am – 2:00 pm, 2:00 pm – 10:00 pm, 10:00 pm – 6:00 am Verus Recruitment is partnering with a leading manufacturing company based in South Yorkshire, operating from their advanced manufacturing facility in Rotherham. This company provides services to OEMs across industries such as defense, security, construction, quarrying, recycling, and rail, with in-house capabilities including laser cutting, CNC machining, fabrication, welding, shot blasting, painting, and assembly. We are seeking a highly skilled CNC Setter Operator to join this dynamic team. Working within a skilled department, you will play a key role in producing critical precision components for a variety of exciting projects. Key Responsibilities: Operate Vertical mill CNC machines to produce precision parts as per specifications. Set up and load materials onto the machine. Monitor machine operations, making adjustments as needed. Inspect finished products to ensure quality and accuracy. Troubleshoot and resolve production issues. Maintain a clean and organized work environment. Support further technical progression initiatives. About You: The ideal candidate will possess: Demonstrated experience as a CNC milling Setter, Operator, Machinist, or Programmer. Proficiency with precision measurement instruments. Strong ability to interpret technical drawings and specifications. Excellent interpersonal and communication skills, with the ability to work at all levels. A focus on quality, with the ability to promote and uphold high standards. Strong mathematical skills for measurements and calculations. A commitment to excellent manufacturing practices. What’s in it for You? Competitive salary £27,885- £42,900 PA (£14.30-£22.00 PH) Depending on experience 33 days holiday (including statutory public holidays). Free, secure onsite parking. Life Assurance Plan (Death in Service). Monthly prize draw incentives. Company pension scheme. Reduced gym membership. Access to a healthcare scheme. Colleague referral program with financial rewards. Training and development opportunities tailored to your career growth. Participation in companywide initiatives celebrating team success. Why Join Us? This is an exciting opportunity to develop your career within a forward-thinking manufacturing business. With continuous investment in cutting-edge technology and a collaborative work environment, this role is perfect for skilled professionals looking to make an impact. If you’re a skilled CNC Setter Operator eager to join a thriving manufacturing business, we’d love to hear from you! For more information, contact our Sheffield Team at (phone number removed) . Verus Recruitment Partners is acting as a Recruitment Agency in relation to this vacancy and is an Equal Opportunities Employer. Keywords: CNC Setter, CNC Operator, CNC Machinist, CNC Programmer, Precision Machining, Manufacturing, Rotherham, Sheffield, South Yorkshire, Meadowhall

Job title: Quality Inspector Location: Rotherham Salary: Up to £19 PH Contract: Full-time, Permanent Shifts: 4-day week, Monday-Thursday, Rotating Days and Nights (6am – 4pm and 8pm – 6am.) Verus Recruitment is excited to partner with a leading manufacturing company in Rotherham, seeking an experienced Quality Inspector to join their team. This company serves a diverse range of OEMs across industries such as defence, security, construction, quarrying, recycling, and rail, with in-house capabilities including laser cutting, CNC machining, fabrication, welding, shot blasting, painting, and assembly. About the Role: Follow the Inspection Plan set by the Quality Manager. Conduct timely inspections using available equipment. Create inspection reports for components and fabrications. Liaise with Quality Engineers when required. Perform monthly internal calibration of measurement equipment and maintain calibration records. About You: Previous experience in quality/inspection within a metal engineering manufacturing environment. Proficient in using the following equipment: Measuring Arms (Faro or similar) Polyworks General handheld tools (Vernier, Tape, Rule, Bevel Box, etc.) Knowledge of problem-solving techniques and quality control processes. Flexible and adaptable to meet changing requirements. Strong interpersonal and communication skills, with the ability to interact at all levels. Focused on quality with the ability to consistently advocate its importance. What’s in it for you? Competitive Salary: Up to £19 Per Hour (Includes shift allowance) Health & Well-being Support: Access to a healthcare plan. Generous Leave: 33 days holiday (including public holidays). Future Planning: Company pension scheme and life assurance. Rewards: Monthly prize draw and referral programme incentives. Development Opportunities: Tailored training for career growth. Health & Fitness: Reduced gym membership. Team Success: Participation in company-wide initiatives and celebrations. Convenience: Free and secure onsite parking. If you’re passionate about quality and eager to make an impact in a forward-thinking manufacturing environment, we’d love to hear from you! For more information, please contact our Sheffield Team at (phone number removed) Verus Recruitment Partners is acting as a Recruitment Agency in relation to this vacancy and is an Equal Opportunities Employer. Keyword: Inspection, Inspector, Quality Inspector, FARO arm, Polyworks, metals, Verniers, Sheffield, Rotherham, Doncaster

Responsibilities include ensuring precision in machined parts and maintaining overall machining quality.

Candidates should have a minimum of 5 years experience in precision machining and be proficient in CAD software like AutoCAD or SolidWorks.

A well-established UK manufacturer is seeking an experienced Alphacam Programmer to develop CNC programs and operate CNC machinery.The ideal candidate will have a minimum of 2 years' experience in wood or composite cutting, strong knowledge of Alphacam, and proficiency in programming CNC machines.Th

A dynamic manufacturing company in the United Kingdom is seeking a skilled CNC Operator to join their team on a full‑time basis.The ideal candidate should have a strong background in operating CNC machines with at least 2 years of experience.Responsibilities include setting up machines, monitoring

A leading precision engineering firm in the United Kingdom is seeking a skilled CNC Machinist.The role involves operating various machinery to meet production goals while ensuring quality standards.Candidates should have experience with Fanuc, Haas, or Siemens systems, and a background in CNC millin

A manufacturing company in the UK is seeking an Apprentice Machining Technician. This full-time apprenticeship provides hands-on experience in precision machining operations and training for a Level 3 qualification.

Candidates should have a strong background in machining and capital equipment, excellent communication skills, and be flexible for regional and national travel.

The chosen candidate will study towards an Extended Diploma Level 3 in Mechanical Manufacturing Engineering (Machining) Apprenticeship. During your apprenticeship you will be trained in all disciplines of machining, including milling and turning along with general hand‑fitting skills.

The ideal candidate has a background in machining and capital equipment, with strong fault-finding skills.

This role will involve hands-on training in CNC machining with the aim of becoming a permanent team member after 3.

The ideal candidate will set and operate CNC lathes and various machining centres, producing high-quality precision components in materials like stainless steels and nickel alloys.