Trabajos machining en BedfordCrear alertas

Baltic Recruitment are currently recruiting for a Temp to Perm Maintenance Senior Technician (Electrical Bias) for a client located in Pontypool. This role is working on a 3-Shift Pattern, Monday - Friday. Reporting into the Maintenance Supervisor. Maintenance Senior Technician (Electrical Bias) Main Duties and Responsibilities: • Safety, • To promote health and safety in all aspects of engineering through effective leadership., • Develop a safety culture within the maintenance team to improve safety when working, • Raise near misses and conduct investigations where required., • Ensure all maintenance activities are carried out in a safe manner and are compliant with all health and safety rules., • People, • To actively coach and develop associate Technicians and maintenance Technicians through training and development activities., • Support, Coach and develop engineering apprentices where required., • Quality, • Support the business in ensuring right first time, every time is achieved from the machining and assembly cells., • Ensure the customer is put first in all decisions relating to engineering repairs. Ensuring they are not affected by any work completed., • Reliability, • OEE - React and respond to daily OEE issues where Technical support is Required, • OEE - Analyse and utilise OEE data to identify engineering issues and create improvement plans to resolve in the shortest possible time frame, • OEE - Take ownership of plant performance in your area of responsibility and strive to ensure it is always improving., • Utilise root cause analysis tools and techniques to determine root cause on significant failures and plan, implement and monitor control to resolve., • Utilise CMMS system to log time and report counter measures for reactive and planned maintenance activities., • Take lead role and Strive to continually improve plant and processes in line with business goals. Utilising performance data to identify areas for improvement and measure success., • Support Maintenance team in optimising maintenance strategy for the site and identifying critical spares., • Provide technical support where required during planned predictive maintenance activities to ensure all tasks are completed correctly., • Cost, • Keep business profitability in mind when using spare parts., • Look for improvement opportunities that will reduce costs., • Promote energy saving within the department. Maintenance Senior Technician (Electrical Bias) Applicants: Essential: • An apprenticeship or HNC in engineering., • Must understand the systems within Company and the Customer Quality Drivers., • Must understand the importance of OEE and how it is made up and calculated., • Must be able to communicate effectively at all levels both verbally and in writing., • Must be able to manage workload in a timely manner in order to achieve deadlines., • Must be able to formulate plans to achieve targets and be willing and able to make decisions based on facts., • The will to achieve targets and goals and satisfy all internal and external customers., • Electrical control system fault finding in a manufacturing/production environment., • PLC fault finding experience, using A-B Logix platforms and Siemens Step7/TIA Portal. Desirable: • HNC/HND in Electrical engineering subject., • Microsoft Outlook and PowerPoint software., • CMMS experience - Ideally Agility or SAP., • CNC fault finding and maintenance, predominantly Siemens 840D Solution Line., • PLC programming experience., • Vision system interrogation and modification using Cognex or Neurocheck., • Robotics fault finding and maintenance (Staubli, ABB and UR). Working a 3-Shift Pattern, Monday to Friday. 9.00 pm - 6.00 am: Day Shift: 6am - 2pm Back Shift: 2pm - 10pm Night Shift: 10pm - 6am Salary(s): Basic: £37,938.11 AM/PM Shift: £42,650.02 Night Shift: £43,461.90 JBRP1_UKTJ

MERITUS are recruiting for a Senior Manufacturing Engineer to join our client, a growing precision engineering business supporting the aerospace sector in Northern Ireland. This is a permanent opportunity created through expansion, with significant new aerospace projects already approved and ready to move into production. SENIOR MANUFACTURING ENGINEER - CNC PROGRAMMING - £45,000-£50,000+ DEPENDING ON EXPERIENCE - PORTADOWN, NORTHERN IRELAND - PERMANENT - AEROSPACE / PRECISION ENGINEERING The business is experiencing significant growth and has a strong pipeline of work for the coming years. Recent investment includes new state-of-the-art machinery and expanded manufacturing facilities, making this an excellent opportunity for an experienced engineer looking for long-term stability alongside technically interesting work. You'll join an established engineering team of around 10-12 people, typically working collaboratively in groups of two or three to introduce new products into production. What will you be doing? • Delivering New Product Introduction (NPI) projects for precision-engineered aerospace components, • Offline CNC programming for 3, 4 and 5-axis milling using CAM software such as MasterCAM or CATIA V5, • Designing fixtures and workholding solutions, • Selecting cutting tools and developing effective machining strategies, • Verifying NC programs using Vericut and supporting prove-out activities, • Creating manufacturing processes, work instructions and machine set-up documentation, • Working closely with Production and Quality to improve existing manufacturing processes, • Supporting projects from initial manufacturing concept through to productionWhat are we looking for?, • Around 5+ years' experience within precision manufacturing, CNC machining or a closely related engineering environment, • Hands-on experience using CAM software such as MasterCAM, CATIA V5, Hypermill, EdgeCAM or similar, • Strong knowledge of CNC machining strategies, processes and G & M codes, • Experience working within aerospace, automotive, precision engineering or another relevant high-quality manufacturing environment, • HND or Degree in an Engineering discipline, or a completed engineering apprenticeship backed by relevant manufacturing experience, • A collaborative, practical approach and willingness to contribute across the wider engineering teamExperience with any of the following would be useful:, • Aerospace manufacturing or aerospace engine components, • New Product Introduction (NPI), • CMM / precision inspection, • Advanced CNC functions including macro programming and probing, • FANUC, Heidenhain or Siemens controls, • Lean Manufacturing or Six SigmaWhy consider this opportunity? This is a genuine growth role rather than a replacement. The company has secured substantial new work and continues to invest heavily in its manufacturing capability. There is a strong focus on job security, long-term aerospace programmes and giving engineers the opportunity to work with modern manufacturing technology. • £45,000-£50,000+ salary depending on experience, with flexibility for particularly strong candidates, • Monday-Thursday, 7:00am-4:00pm and Friday, 7:00am-12 noon, • Private medical benefits, • Death in service benefit, • Additional holiday and long-service holiday benefitsCandidates relocating to Northern Ireland can be considered. Applicants must already have the right to work in the UK, as visa sponsorship is not available for this position. JBRP1_UKTJ

Baltic Recruitment are currently recruiting for a Temp to Perm Maintenance Senior Technician (Mechanical Bias) for a client located in Pontypool. This role is working on a 3-Shift Pattern, Monday - Friday. Reporting into the Maintenance Supervisor. Maintenance Senior Technician (Mechanical Bias) Main Duties and Responsibilities: • Safety, • To promote health and safety in all aspects of engineering through effective leadership., • Develop a safety culture within the maintenance team to improve safety when working, • Raise near misses and conduct investigations where required., • Ensure all maintenance activities are carried out in a safe manner and are compliant with all health and safety rules., • People, • To actively coach and develop associate Technicians and maintenance Technicians through training and development activities., • Support, Coach and develop engineering apprentices where required., • Quality, • Support the business in ensuring right first time, every time is achieved from the machining and assembly cells., • Ensure the customer is put first in all decisions relating to engineering repairs. Ensuring they are not affected by any work completed., • Reliability, • OEE - React and respond to daily OEE issues where Technical support is Required, • OEE - Analyse and utilise OEE data to identify engineering issues and create improvement plans to resolve in the shortest possible time frame, • OEE - Take ownership of plant performance in your area of responsibility and strive to ensure it is always improving., • Utilise root cause analysis tools and techniques to determine root cause on significant failures and plan, implement and monitor control to resolve., • Utilise CMMS system to log time and report counter measures for reactive and planned maintenance activities., • Take lead role and Strive to continually improve plant and processes in line with business goals. Utilising performance data to identify areas for improvement and measure success., • Support Maintenance team in optimising maintenance strategy for the site and identifying critical spares., • Provide technical support where required during planned predictive maintenance activities to ensure all tasks are completed correctly., • Cost, • Keep business profitability in mind when using spare parts., • Look for improvement opportunities that will reduce costs., • Promote energy saving within the department. Maintenance Senior Technician (Mechanical Bias) Applicants: Essential: • An apprenticeship or HNC in engineering., • Must understand the systems within the Company and the Customer Quality Drivers., • Must understand the importance of OEE and how it is made up and calculated., • Must be able to communicate effectively at all levels both verbally and in writing., • Must be able to manage workload in a timely manner in order to achieve deadlines., • Must be able to formulate plans to achieve targets and be willing and able to make decisions based on facts., • The will to achieve targets and goals and satisfy all internal and external customers., • Electrical control system fault finding in a manufacturing/production environment., • Hydraulic and pneumatic fault finding and repair., • Drive chain (gearbox/bearings/couplings/pulley/belt/chain) fault finding and repairs. Desirable: • HNC/HND in Mechanical engineering subject., • Microsoft Outlook and PowerPoint software., • CMMS experience - Ideally Agility or SAP., • CNC fault finding and maintenance, predominantly Siemens 840D Solution Line., • Precision spindle maintenance and repair., • Position control - Linear rail/Ballscrew maintenance and repair., • Robotics fault finding and maintenance (Staubli, ABB and UR). Working a 3-Shift Pattern, Monday to Friday. Day Shift: 6am - 2pm Back Shift: 2pm - 10pm Night Shift: 10pm - 6am Salary(s): Basic: £37,938.11 AM/PM Shift: £42,650.02 Night Shift: £43,461.90 JBRP1_UKTJ

Lead CNC machining strategy and own the machining technology roadmap. We are seeking an experienced Manufacturing Engineer - Machining Lead to lead CNC machining strategy and advanced tooling initiatives within the Operations Engineering department. Working closely with Engineering, Production and Q

TXM Recruit seeks an experienced Manufacturing Engineer - Machining Lead to direct CNC machining strategy and tooling initiatives within the Operations Engineering team. You will lead engineers and technicians, develop robust machining processes and own the technology roadmap, aligning with business

QHSE Engineer Bedford £50,000 excellent benefits An established engineering business is looking for an experienced QHSE Engineer to lead and develop its Quality, Environmental, Health & Safety systems, while working closely with Engineering, Purchasing and suppliers across the UK and Europe. Key duties for QHSE Engineer role Maintain and develop ISO 9001 & ISO 14001 management systems. Manage QHSE policies, procedures, audits and compliance. Conduct internal and supplier audits and manage external certification audits. Lead quarterly HSE meetings and management reviews. Develop quality plans and work instructions. Manage supplier quality, delivery performance and corrective actions. Carry out supplier assessments and visits across the UK and Europe. Work closely with Engineering and Purchasing to ensure technical and quality requirements are met. Coordinate planned and reactive maintenance for the site facilities. About you as the QHSE Engineer 5+ years' experience in a similar QHSE role within an engineering/manufacturing environment. Strong knowledge of ISO 9001, ISO 14001 and H&S legislation NEBOSH General Certificate Internal Auditor qualification/experience required; Lead Auditor desirable. Strong understanding of engineering processes including casting, forging, machining, NDT. Excellent communication, analytical and problem-solving skills. Experience working with suppliers and MRP systems would be advantageous. TPBN1_UKTJ

ARM Ampthill is recruiting an experienced Tooling Design Engineer to support the full lifecycle from prototype development through to production. The role focuses on designing tooling, jigs and fixtures for manufacturing, including NC machining and composites, with CREO-based drawings and Windchill document control. The position is onsite in Ampthill with a 4-day week, 12-month contract, offering £40-£50 per hour. Active SC clearance is required to work on this defence programme. #J-18808-Ljbffr

As an Automation Engineer at Lexington Medical, you will design the fixtures and specify the robotics and automation equipment that build a surgical stapler, then scale those processes as production volume grows. This is an entry-level role built for an engineer coming out of school, and the work is real from the start: the fixture you design gets installed on a line that is running, and you will be on the floor when it does. Manufacturing, engineering, and quality all work in the same building in Bedford, so the loop between designing something and finding out whether it worked is short. Lexington Medical designs and manufactures AEON™ surgical stapling technology at our headquarters in Bedford, Massachusetts, just outside Boston. Our products are used in minimally invasive surgery, where precision, reliability, and quality matter every time. Because engineering, manufacturing, and quality work together under one roof, the people building and supporting our products are close to both the process and the decisions behind it. As an Automation Engineer at Lexington Medical, you will support the development, implementation, and scaling of the manufacturing processes that produce our AEON™ surgical stapling products. You will design fixturing and tooling in SolidWorks, help source and commission production equipment including robotics and automation cells, provide day-to-day engineering support on the floor, and use process data to find and fix the steps that limit quality or throughput. You will work alongside experienced manufacturing engineers who will hand you real projects early rather than have you shadow theirs, and you will learn how manufacturing works inside a regulated quality system as you go. • Design semi-automated, automated, and manual fixturing and tooling for manufacturing operations, including both digital and physical tools., • Work with external vendors to source custom and off-the-shelf production equipment, • Develop and implement manufacturing processes that scale as production volume grows., • Provide engineering support on the production floor, troubleshooting equipment, and process issues as they come up., • Write and maintain manufacturing work instructions and process documentation., • Train production personnel on new and revised processes, and support continuous improvement and quality projects., • BS in Mechanical Engineering or a related engineering discipline (Industrial, Manufacturing, or Computer)., • No professional experience is required. This role is open to recent graduates, and internship, co-op, or project experience designing and building mechanical or electromechanical equipment is what we look for in its place., • Proficient in 3D CAD, with SolidWorks preferred., • Coursework or hands-on experience with production methods such as machining, injection molding, or assembly processes., • Coursework or hands-on experience working from electrical schematics and I/O lists to wire, terminate, and troubleshoot sensors, I/O blocks, and motor control hardware at the machine or panel level., • Willing to spend real time on a production floor, hands-on with equipment., • Exposure to robotics, automation, PLCs, or motion control is a plus., • An internship or co-op in medical device or another regulated manufacturing environment is a plus., • In your first few months, you own a fixture or tooling project from concept through installation on the line., • By one year, you have worked as a member of a team launching a fully automated work cell, taking responsibility for the success of a subsystem., • You are able to familiarize yourself with processes, equipment, and mechanisms with which you have no prior experience. You can turn this familiarity into practical, right-sized solutions on and off the production floor. This position is based at our headquarters in Bedford, Massachusetts, in the Greater Boston area, and is an on-site role. Salary Range $80,000—$100,000 USD #J-18808-Ljbffr

GM Performance Power Units – Concord, NC Title: AM Design Engineer Job Summary: The AM Design Engineer will serve as a rotational member of product design teams, embedding directly into projects to apply AM design principles and provide feedback to the core AM Design group. This role focuses on developing optimized geometries for laser powder bed fusion using 3DXpert and NX, while also supporting prototyping, fixtures, and tooling through FDM systems. A key part of the role is creating and refining test geometries in collaboration with the AM Materials and AM Process teams to accelerate parameter development and process optimization. Success in this role means delivering manufacturable, cost-effective designs that balance design freedom with process constraints, while building foundational expertise in AM design. Key Responsibilities: • Apply design-for-additive-manufacturing (DfAM) rules and guidelines to create optimized LPBF parts., • Collaborate with product design teams on part orientation, support strategies, and manufacturability reviews., • Develop and iterate test geometries to support AM Materials and AM Process teams in parameter, simulation, and process optimization., • Support rapid prototyping efforts using in-house and external AM equipment, including FDM for fixtures, tooling, and prototypes., • Assist in training and mentoring junior designers on AM design practices., • Document lessons learned and contribute to the continuous improvement of AM design standards and best practices., • Collaborate with downstream manufacturing stakeholders to ensure efficient and achievable manufacturing plans., • Become a technical resource and mentor for cross functional teams incorporating AM into their manufacturing workflow. Required Qualifications: • Bachelor’s degree in Mechanical Engineering or a related field., • 1–3 years of professional experience in design engineering; prior LPBF AM exposure preferred., • Proficiency in Siemens NX (preferred) or similar 3D CAD software is required., • Familiarity with AM-specific software such as 3DXpert, nTop, or Materialise is preferred., • Understanding of DfAM principles, particularly for LPBF., • Working knowledge of 3D GD&T and application to downstream processes of the Additive component such as Machining, Welding, and Assembly, • Strong problem-solving skills, attention to detail, and eagerness to learn in a fast-paced environment., • Ability to solve complex problems using innovative solutions while having the agility to adapt to evolving part designs and requirements., • Ability to collaborate across design, materials, and process teams., • Strong functional mechanical knowledge, establishing a working familiarity with product team’s design intent and goals in order to best utilize and “sell” the advantages of AM to develop the highest performing and efficient component., • Working knowledge of LPBF equipment operation, setup, and material handling is preferred. Key Performance Indicators (KPI’s): • Design quality and manufacturability: percentage of parts meeting specification with minimal design cycles and efficient post processing., • Iteration speed: ability to deliver optimized designs and test geometries within project timelines., • Cross-team impact: measurable contributions to Materials and Process teams through effective test geometry design., • Knowledge transfer: effectiveness in capturing and sharing design insights with the core AM Design team and product design teams. Because this position requires access to export-controlled technology or information, the successful candidate must be able to satisfy applicable U.S. export-control requirements. This may require verification of status as a “U.S. Person” or eligibility to obtain any required government authorization. Why Join Us You’ll play a pivotal role in ensuring the reliability and performance of a next-generation Formula 1 power unit. Our culture rewards precision, innovation, and the relentless pursuit of performance. Please note: GM Performance Power Units and all affiliated companies are Equal Opportunity employer(s). Minorities, women, veterans, and individuals with disabilities are encouraged to apply. For more information regarding the EEOC, please visit https://www.eeoc.gov/employers/upload/posterscreenreader_optimized.pdf. Only direct hires need apply to or inquire about job postings at GM Performance Power Units. We are not accepting calls, resumes or applications from recruiting firms at this time.

The role drives manufacturing excellence via optimized programming, fixture design, tooling strategy, and process improvements. Lockheed Martin Corporation in Ampthill seeks an experienced Lead Machining Manufacturing Engineer to steer CNC machining strategy and tooling initiatives.

Tooling Design Engineer Ampthill, Bedfordshire (Onsite) £40-£50 per hour 12-Month Contract 37.5 Hours Per Week | Monday to Thursday (4-Day Week) Inside IR35 Active SC Clearance Required An exciting opportunity has arisen for an experienced Tooling Design Engineer to join a leading defence engineering programme. Working within the Operations Engineering team, you will support the full product lifecycle, from prototype development and manufacturing build through to production support and product maturity. This role offers the chance to work on complex engineering projects, designing and developing tooling, jigs, fixtures and manufacturing aids that improve quality, efficiency and production performance. You will play a key role in supporting manufacturing operations while driving continuous improvement and right-first-time quality. • Design and develop tooling, jigs and fixtures for manufacturing applications., • Support tooling requirements across NC machining and composite lay-up activities., • Create technical requirement specifications and manufacturing documentation., • Produce manufacturing BOMs, routings and detailed process instructions., • Support new product introduction and ongoing production programmes., • Work closely with Production Engineering, Industrial Engineering and wider project teams., • Drive manufacturing improvements, cost reduction initiatives and quality enhancements., • Support capital equipment projects from definition through to implementation., • Proven tooling design experience within a manufacturing environment., • Experience designing tooling solutions from concept through to production release., • Strong manufacturing knowledge across CNC machining, composites, fabrication, mechanical assembly or additive manufacturing., • Proficiency using CREO to create 3D models and engineering drawings., • Experience using Windchill for document control and change management., • Ability to produce engineering drawings to BS8888 standards., • Working knowledge of GD&T, DFM/A and PFMEA principles., • Experience preparing manufacturing BOMs, routings and process documentation., • Understanding of Lean Manufacturing and continuous improvement methodologies., • Strong analytical and problem-solving skills., • Excellent communication and stakeholder management abilities., • Collaborative team player with a proactive approach., • Ability to work independently and influence positive change., • Highly organised with a focus on quality, delivery and customer requirements. Please note: Due to the nature of the programme, candidates must hold active SC Security Clearance and be available to work onsite in Ampthil #J-18808-Ljbffr

We’re seeking a Senior Mechanical Design Engineer (Tooling) to join our team based in Ampthill, Bedfordshire. The Operations Engineering team provides engineering resources to support Operational performance and major product development projects; from design through to engineering build and production support, to end of life of product. The team provides full product lifecycle support including prototype design & build, development and integration of the build documentation and supporting requirements of full production build. This role will be required to Design, develop and implement industrial tools, dies, gauges, jigs, fixtures, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements. will be required to have a good working knowledge of CAD design tools such as CREO and Windchill. Design involvement through the full product lifecycle, with the aim to reduce manufacturing costs and improve yield at all stages, which will directly impact our customers, whilst supporting the Programme in delivery of the milestones. As part of the Operations Engineering Team, the Mechanical Design Engineer (Tooling) is the recognised point of contact for all matters related to their area of expertise, providing engineering advice, problem solving and co-ordination of activities in support of current and future business. The Mechanical Design Engineer (Tooling) will drive a proactive approach to right first time quality to promote growth, will enhance the reputation of the business through exceptional quality standards and contribute towards a significant reduction in overall manufacturing costs. • Develop manufacturing tooling within any of the following technologies;, • Assembly, Integration and Test, • Machining, • Composite layup, • Additive Manufacturing, • Designing any new tooling & fixturing requirements, • Experienced in the creation of Technical Requirement Specifications, • Creation of detailed process instructions, • Creation of Manufacturing BOM’s / routings to aid ease of manufacture., • Active participation in customer and programme meetings., • Assist with the Technical requirements of the relevant section of the Capital plan from definition to acceptance., • Supporting full rate production of a range of products aligned to the LMUK Ampthill Business requirements., • Close liaison of activities with Industrial Engineering, Production Engineering and other functions., • Support with the business process reviews and generation / update of relevant documentation. The successful candidate must be able to achieve the appropriate level (SC) of security clearance. More details can be found here • Knowledge of Manufacturing technologies., • Good communication skills that can sell and influence to a range of audiences internally and externally with the ability to work with all levels of the business., • An independent thinker, able to take an assertive stance to enforce the key requirements of quality and the customer., • Demonstrate a level of design and manufacturing process industry experience, • Knowledge of, Lean Manufacturing, Six Sigma methodology, Quality toolset experience., • An understanding of GD&T (Geometric Dimensioning & Tolerances) with the ability to identify key characteristics and datum structures., • Familiar with the use of CAD software (CREO) to generate technical drawings, • Experience of preparing operational documentation and manufacturing data-packs., • Experience of driving change in process, behaviour and culture., • Awareness of DFM/A and PFMEA principles and the use of them in a practical application to support Industrial Engineering activity., • Strong analytical skills., • Key competences: Personal accountability, building relationships, planning for results, customer first, adaptability. #J-18808-Ljbffr

We are seeking an experienced Lead Machining Manufacturing Engineer to lead CNC machining strategy and advanced tooling initiatives within the Operations Engineering department. The Lead Machining Manufacturing Engineer will be responsible for maintaining and adding to the machining section of the t

Senior Mechanical Design Engineer (Tooling) Ampthill, Bedfordshire, UK 37.5 hours per week + 4-day work week option We’re seeking a Senior Mechanical Design Engineer (Tooling) to join our team based in Ampthill, Bedfordshire. The Operations Engineering team provides engineering resources to support Operational performance and major product development projects; from design through to engineering build and production support, to end of life of product. The team provides full product lifecycle support including prototype design & build, development and integration of the build documentation and supporting requirements of full production build. This role will be required to Design, develop and implement industrial tools, dies, gauges, jigs, fixtures, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements. You will be required to have a good working knowledge of CAD design tools such as CREO and Windchill. You will have design involvement through the full product lifecycle, with the aim to reduce manufacturing costs and improve yield at all stages, which will directly impact our customers, whilst supporting the Programme in delivery of the milestones. As part of the Operations Engineering Team, the Mechanical Design Engineer (Tooling) is the recognised point of contact for all matters related to their area of expertise, providing engineering advice, problem solving and co-ordination of activities in support of current and future business. You will drive a proactive approach to right first time quality to promote growth, will enhance the reputation of the business through exceptional quality standards and contribute towards a significant reduction in overall manufacturing costs. Key Responsibilities: • Develop manufacturing tooling within any of the following technologies;, • Assembly, Integration and Test, • Machining, • Additive Manufacturing, • Designing any new tooling & fixturing requirements, • Experienced in the creation of Technical Requirement Specifications, • Creation of detailed process instructions, • Creation of Manufacturing BOM’s / routings to aid ease of manufacture., • Active participation in customer and programme meetings., • Assist with the Technical requirements of the relevant section of the Capital plan from definition to acceptance., • Supporting full rate production of a range of products aligned to the LMUK Ampthill Business requirements., • Close liaison of activities with Industrial Engineering, Production Engineering and other functions., • Support with the business process reviews and generation / update of relevant documentation., • The successful candidate must be able to achieve the appropriate level (DV) of security clearance. Required skills, qualifications and experience • Knowledge of Manufacturing technologies., • Good communication skills that can sell and influence to a range of audiences internally and externally with the ability to work with all levels of the business., • An independent thinker, able to take an assertive stance to enforce the key requirements of quality and the customer., • Demonstrate a level of design and manufacturing process industry experience, • Knowledge of, Lean Manufacturing, Six Sigma methodology, Quality toolset experience., • An understanding of GD&T (Geometric Dimensioning & Tolerances) with the ability to identify key characteristics and datum structures., • Familiar with the use of CAD software (CREO) to generate technical drawings Experience of preparing operational documentation and manufacturing data-packs., • Experience of driving change in process, behaviour and culture., • Awareness of DFM/A and PFMEA principles and the use of them in a practical application to support Industrial Engineering activity., • Strong analytical skills. Personal accountability, building relationships, planning for results, customer first, adaptability. #J-18808-Ljbffr

Lockheed Martin in Ampthill, United Kingdom, seeks an experienced Lead Machining Manufacturing Engineer to guide CNC machining strategy and advanced tooling initiatives.

Experienced machinist sought for a manufacturing role involving CNC and manual machining to produce precision components.

Seeking a CNC Turner for precision machining roles, working with new lathes in a modern workshop for a company supplying the F1 industry.

Seeking a Quality Manager for a precision engineering company specializing in CNC machining and aerospace components.

Junior Machinist (Manual Machining / Bespoke Joinery).

Seeking a Junior Machinist with manual woodworking machine experience for a bespoke joinery manufacturer.Role involves operating machinery, reading drawings, and selecting materials, with training and progression opportunities.

Seeking a Quality Manager to lead the quality function for a growing precision engineering company specializing in CNC machined components for the aerospace industry.

Seeking an Estimator & Planning Engineer in Manchester for a full-time permanent role.Responsibilities include cost estimation, production planning, and job ticket creation for manufacturing.

Job Description: We are recruiting for our food production client in Dunstable who are looking for a machine operator for their packaging department.Working Monday and Friday between the hours of 07:00 to 17:00 However, there may be a need to work flexibly across the calendar week in line with busin

Production Operative Location: Shefford Hours: Monday to Friday, Rotating Weekly Shifts - 6:00am to 2:00pm & 2:00pm to 10:00pm Job Type: Temp Ongoing, Immediate Start Pay Rate: £13.We are looking for a motivated and hardworking Production Operative to join our clients growing team in Shefford.A

NOW RECRUITING – FOOD PRODUCTION OPERATIVES Location: Potton, Bedfordshire We are currently recruiting Food Production Operatives for a busy food production company based in Potton, specialising in pork and beef products.We are looking for hardworking, reliable and committed individuals who are wi

Triangle Recruitment is looking to recruiting a Production Operatives to work for a leading UK-based manufacturer of concrete fencing products in the Bedfrod.We are looking for a reliable and safety-focused Production Operative to join our concrete manufacturing team.This is a hands-on role working

This job is with TE Connectivity, an inclusive employer and a member of myGwork – the largest global platform for the LGBTQ+ business community.Please do not contact the recruiter directly.At TE, you will unleash your potential working with people from diverse backgrounds and industries to create

Selecting appropriate tooling, workholding arrangements, cutting speeds and feeds for different machining operations. Setting tools, offsets and work coordinates to ensure accurate and repeatable machining. Adjusting CNC programmes, tooling and machining parameters to achieve the required component

Strong understanding of machining principles, cutting tools, fixture design and process control. TE Connectivity's CNC Machinists prepare, set, operate and optimise CNC machining processes used in the manufacture of high-precision components. Set up and operate Haas, Matsuura and FANUC Robodrill mac

Food Production Operative - Selby.At Job&Talent, we are recruiting for a Food Production Operative to work with Greencore in Selby.Join a team creating food for leading supermarket brands, working on either the production or packing line in a hands-on environment.Candidates should take the time to r

This job is with TE Connectivity, an inclusive employer and a member of myGwork – the largest global platform for the LGBTQ+ business community.Please do not contact the recruiter directly.At TE, you will unleash your potential working with people from diverse backgrounds and industries to create

Machine Operator Darlaston, Wednesbury.Double Days: Monday to Thursday 6am to 1.Main Duties & Responsibilities.Quality checking and ensuring parts are built to tolerance.Checking parts with the use of a gauge.Previous manufacturing experience within an automotive environment.Strong organisational sk

Airbus in Broughton is seeking a candidate for a full-time continental night shift.Nights are 19:00–07:00, on a 3 on/4 off cycle, and the role is based on site.Security clearance: eligibility to gain UK SC clearance.The position offers a competitive salary and a broad package including pension, sh

NEUTRA, a precision engineering business in Oxfordshire, is seeking an exceptional CNC Turner for a 6-month contract with lates and nights.You will set, operate and program Mazak turning centres, turning predominantly composite materials to tight tolerances and inspecting parts to ensure first-time

Baltic Recruitment is seeking a Machine Operator in Darlaston, West Midlands on a temporary basis to support the automotive manufacturing sector.You will operate machines, check quality with gauges, and ensure parts meet tolerance while maintaining a clean, safe workspace in a fast-paced environment

SECURITY CLEARANCE: Eligibility to gain UK SC Security Clearance.TYPE: Full time - Continental night shift.Nights 3 on 4 off - 19:00pm-07:00am.Financial Reward: Competitive salary, annual profit share, contributory pension, share options, car leasing scheme, free onsite parking, various optional sal

You’ll be setting, operating and programming CNC turning machines, machining predominantly composite materials to very tight tolerances.

This hands-on role focuses on low-volume, high-precision components, requiring strong skills in CNC programming and machining.

Monday to Friday | 3-Week Rotating Shift Pattern An exciting opportunity has arisen for an Fork Lift Truck Production Operator to join our Northampton team.We're looking for a safety-focused and motivated individual who enjoys working as part of a team and takes pride in delivering high standards.

Programming, setting and operating a Doosan Puma 2600L CNC lathe with Fanuc controls Producing components from engineering drawings and raw material Programming from scratch for one-off and low-volume work Selecting tooling, machining strategies and processes independently Manufacturing components i

Production Operative Nights - Northampton At Job&Talent, we are recruiting for a Production Operative Nights to work with a leading company in the food manufacturing sector in Northampton.Shift Patterns: 5 out of 7 days per week, including weekends Shift time: 10:00 PM - 6:30 AM * Overtime avail

Join Our Team at Smurfit Westrock! Are you searching for a workplace that values you and your growth? At Smurfit Westrock, we're committed to sustainability, employee well-being, and personal development.About Us We are a global leader in sustainable paper and packaging.Our focus is on the health an

The Role: Setting, operating and programming CNC machines and lathes New team with clear paths for progression to a senior/team lead role Monday to Friday - 8am-5pm The Person: CNC Machinist Milling or turning experience Programming experience Reference Number: BBBH27954 CNC Operator, Machinist, Set

This is what you'll be doing: Setting and/or operating CNC machines Producing components to engineering specifications Carrying out first-off inspections and in-process checks Reading and interpreting engineering drawings Using measuring equipment such as verniers, micrometers and gauges Working in

Experienced CNC Turner Programmer Setter needed for a UK leading precision engineering company in Watford.Offers competitive salary and benefits.