Mechanical jobs in RipleyCreate job alerts

As an experienced Traffic Management Operative, you will be required to work on Traffic Management Schemes for a range of projects, helping them to run smoothly and efficiently to achieve maximum production in a working day, whilst maintaining a high Health and Safety standard. This role requires flexibility due to the nature of the business. You must be able to work both days and nights, including some weekends as required. You must have a can do and responsible attitude to work. Direct and Self Employed available We are looking for someone to: • Oversee all methods of traffic management; Give and take, Priority, Stop/Go boards, Portable traffic signals, Convoy working, Road closures, Lane closures and diversions, • Ensure all work is carried out according to safe working methods and best practice procedures, • Carry out risk assessments and method statements on works involving traffic management, • Ensure that all activities associated with the job are carried out according to laid down procedures where possible. Identify areas that can be improved and report to your line manager, • Ensure that daily vehicle checks are carried out – to ensure cleanliness and tidiness of vehicle and the safety of the driver and passenger, • Promote positive company image whilst at work (via wearing of company clothing, attitude, and site cleanliness), • Demonstrate initiative by constantly looking to see where improvements can be made, • Assist the public, directing them through safe site lines when required, • Ascertain when management intervention is required GTM Golden Rules to be followed, • Only undertake Traffic Management activities that you have the qualification to undertake (LANTRA), • All Traffic Management setups must be compliant with guidance and legislation (Red Book, Chapter 8, ARTSM etc.), • Regularly check your site to ensure it remains compliant, • Report any unsafe acts and conditions, and rectify immediately if safe and competent to do so, • Drive safely and avoid distractions. Keep within the speed limit and drive with due care and attention to prevent road traffic collisions, • Park vehicles safely, taking consideration of members of the public and other road users, • Five-point PPE to be worn on site at all times, • Lantra 12d accreditation as a minimum TTMBC, 12d (M1-M2), • Lantra 12 a/b accreditation, IPV driver, foreman advantageous, • Provide evidence that you understand the differences between Chapter 8 and the Safety at Street Works and Road Works (red book) and how these apply, • Full valid UK driving licence, • Be able to read and understand CAD drawings, in relation to the works required, • Preferable to have mechanical ability in relation to Traffic Lights We offer a competitive salary based on experience along with a full benefits package. Network Plus is proud to be an Equal Opportunity Employer. We celebrate diversity and do not discriminate based on race, religion, colour, nationality, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. We are Armed Forces-friendly. We welcome applications from ex-Armed Forces personnel, reservists, armed forces veterans, cadet instructors and military spouses/partners. We understand that privacy and the security of your personal information is extremely important. By applying for this role, you agree to the terms of our privacy policy which you can find here - https://networkplus.co.uk/privacy-and-cookie-policy. Go Traffic Management has been serving traffic management solutions to clients since 2008, and are now one of the UK’s largest traffic management providers. Our services are delivered from our 22 regional depots, through our dedicated team of 200 employees and support network of approved suppliers. At Go Traffic Management, we have a reputation for providing clients with extensive, well-planned, and expertly delivered solutions for projects and schemes of all sizes. We pride ourselves in meeting (and often exceeding) clients’ expectations in a professional and cost-effective manner, which is a strategy that has resulted in our long-standing working relationships with clients, partners, and stakeholders. Be: SAFE - Go Traffic Management Our Be: SAFE campaign actively encourages our workforce to work safely and avoid unsafe acts and conditions by following four basic rules.

Senior Mechanical Design Engineer \n Due to sustained growth, a significant forward order workload and a continued commitment to be at the forefront of the industry, our client is now searching for a talented and motivated Senior Mechanical Design Engineer. \n The successful candidate will be responsible for supporting the successful delivery of innovative, creative and winning design packages in line w... \n \n ZIPC1_UKTJ

Our client, one of the UK's fastest-growing fast-fit automotive businesses, is currently looking for a Tyre Technician based at their retail centre in Ripley.\n \n \n As a Tyre Technician, you will be responsible for carrying out accurate tyre fitting and repairs, as well as supporting with a range of fast-fit mechanical work, including brakes, exhausts and basic servicing.\n \n \n This is an excellent opportunit...\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n ZIPC1_UKTJ

Elevation Recruitment Group are working with a leading manufacturing business in Ilkeston to recruit a Maintenance Engineer (open to Electrically or Mechanically biased) \n Location: Ilkeston Salary: £50,500 Shift Pattern: 4 on 4 off (days and nights) \n This is an excellent opportunity for an experienced Maintenance Engineer to work within a fast-paced manufacturing environment, supporting cutting-edge automation and production systems. \n As a Maintenance Engineer, you will play a key role in maintaining, troubleshooting and improving a wide range of manufacturing equipment. \n Key Responsibilities of the Maintenance Engineer \n\n • Carry out planned and reactive maintenance across manufacturing equipment.\n, • Diagnose and repair electrical and mechanical faults on automated production lines.\n, • Perform PLC fault finding and support automation systems.\n, • Maintain motor control systems, drives and electrical distribution equipment.\n, • Support robotic systems and automated machinery.\n, • Identify and implement continuous improvement initiatives to maximise plant performance.\n, • Work closely with production and engineering teams to minimise downtime.\n\n About You \n To be successful in this Maintenance Engineer position, you will possess: \n\n • Level 3 or above in Electrical OR Mechanical Engineering\n, • Proven experience as an Maintenance Engineer within a manufacturing environment.\n, • Versatile individual with strong electrical or mechanical expertise and the ability to fault-find across complex automated production machinery.\n, • Experience with motor controls, inverters and automation systems.\n, • A flexible and hands-on approach to maintenance engineering.\n, • Excellent problem-solving and fault-diagnosis abilities.\n\n What's On Offer? \n\n • Competitive salary of £50,500\n, • Stable and growing manufacturing business.\n, • Ongoing training and development opportunities.\n, • Supportive engineering and leadership team.\n\n If you are an experienced Maintenance Engineer looking to join a forward-thinking manufacturing business in Ilkeston, we'd love to hear from you. \n Apply now or contact Kerry Hill for a confidential discussion about this opportunity.

Maintenance Engineer | Alfreton |. The role will involve fault finding on a range of electrical and mechanical equipment, supporting production teams, and helping to drive high engineering standards. Electrical and mechanical maintenance.

MAINTENANCE ENGINEER Job Title: Maintenance Engineer Location: Alfreton, Derbyshire Salary: £40,000 Shift: Days, Monday to Friday Job Role of the Maintenance Engineer A fantastic opportunity that is not to be missed by a strong Maintenance Engineer has come to the forefront. This is an excellent opportunity to join an established FMCG manufacturing business based in Alfreton. Working within a fast-paced manufacturing environment, you will be responsible for carrying out planned preventative maintenance, reactive maintenance, and breakdown repairs across a range of production machinery and equipment, ensuring maximum uptime and operational efficiency. This is a great opportunity for a Maintenance Engineer looking to join a stable business offering a competitive £40,000 salary on a days-based shift pattern. If you are looking for a role that offers technical variety alongside a better work-life balance, this could be the perfect next step in your career. Sector: FMCG Manufacturing Non-Negotiable Requirements of the Maintenance Engineer • Maintenance engineering experience within an industrial manufacturing environment., • Hands-on experience carrying out planned, reactive, and breakdown maintenance within a fast-paced factory. Essential Requirements for the Maintenance Engineer • Strong mechanical and/or electrical fault-finding experience., • Experience working with production machinery and industrial equipment., • A recognised engineering qualification or relevant equivalent experience., • Previous experience working within a manufacturing environment. Desirable Requirements for the Maintenance Engineer • Experience working as a Maintenance Engineer within the UK manufacturing sector., • Previous experience within an FMCG manufacturing environment., • Knowledge of preventative maintenance systems and continuous improvement. The Maintenance Engineer Will Benefit From: • A competitive salary of £40,000., • Days-based working hours., • Working for an established FMCG manufacturing business., • A varied engineering role within a fast-paced production environment., • Opportunities to develop technical skills and improve machinery reliability., • A better work-life balance compared with rotating or night shifts. If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert. For further details, contact Kieran Wall at Pioneer Selection. As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply; please see our website for further details.

An excellent opportunity for a motivated Multi Skilled Maintenance Engineer. You will be responsible for electrical fault finding, mechanical maintenance and attending emergency breakdowns. Maintenance of electrical equipment including motors, drives, sensors and control panels.

Engineer, Mechanical, Project, Engineering, Manufacturing, Manager, Capex, Projects, Design, Manufacture, Manufacturing, Ripley, Nottingham, Derby, Mansfield, Chesterfield, Alfreton. Are you a Project Engineer from a manufacturing background looking to join a world-leading company, offering a highly

Engineer, Mechanical, Project, Engineering, Manufacturing, Manager, Capex, Projects, Design, Manufacture, Manufacturing, Ripley, Nottingham, Derby, Mansfield, Chesterfield, Alfreton. This role would suit a Project Engineer from manufacturing, background looking to work on multi million pound project

WHAT WE NEED FROM OUR MULTI SKILLED MAINTENANCE ENGINEERS:. Recognised Electrical / Mechanical maintenance apprenticeship / training scheme Level 3. Previous experience of maintenance and repair of PLC systems.

Contract Duration: 3 Months (Short-Term Ongoing) Location: Heanor Rate: £35-£40 per hour (Outside IR35) Are you an experienced Mechanical Maintenance Technician looking for your next contract opportunity? We are currently recruiting for a Mechanical Maintenance Technician to join a busy industrial site in Heanor on an initial 3-month contract. This is an Outside IR35 assignment offering excellent rates and the potential for ongoing work. The role is heavily mechanically biased, focusing on valves, pumps, pipework, mechanical repairs, and plant maintenance, with occasional basic electrical fault-finding support. • Carry out planned preventative maintenance (PPM) and reactive maintenance on plant and equipment., • Diagnose faults and complete strip-downs, repairs, overhauls, and rebuilds of valves, pumps, and mechanical assemblies., • Perform repairs and maintenance on pipework, fittings, and associated mechanical systems., • Respond effectively to equipment breakdowns to minimise downtime., • Assist with basic electrical fault-finding on motors, sensors, and control equipment when required., • Support installation, commissioning, and modification activities across site., • Complete maintenance records and documentation accurately., • Ensure all activities comply with health & safety regulations, permit-to-work systems, and confined space procedures., • Work closely with operations and engineering teams to maximise plant reliability and performance., • Proven experience within an industrial, manufacturing, process, utilities, or heavy engineering environment., • Strong hands‑on mechanical maintenance experience., • Demonstrable experience working on:, • Valves, • Pumps, • Pipework, • Mechanical assemblies, • Rotating equipment, • Experience diagnosing and repairing mechanical faults., • Basic electrical fault-finding knowledge., • Ability to read and interpret engineering drawings and technical documentation., • NVQ Level 3, City & Guilds, Apprenticeship, or equivalent Mechanical Engineering qualification., • IPAF Licence, • Confined Space Certification, • Permit to Work Experience, • Process manufacturing environments, • Utilities, water treatment, energy, or heavy industrial sites, • CMMS maintenance systems, • Shutdowns, outages, and project-based maintenance work Ideal background / Previous roles may include Mechanical Fitter | Maintenance Fitter | Mechanical Engineer | Plant Fitter | Maintenance Engineer | Mechanical Maintenance Engineer | Industrial Mechanical Technician | Reliability Technician | Shutdown Technician | Valve Technician | Service Engineer | Multi-Skilled Maintenance Engineer (Mechanical Bias) | Mechanical Craftsperson #J-18808-Ljbffr

At Envirogen Group, we deliver advanced water solutions as a premier Lifecycle Performance Company. We are seeking a high-calibre Senior Engineer to join our core engineering team in the UK —though for highly accomplished professionals, flexible hybrid or remote working arrangements will be fully considered. This critical role offers an exceptional opportunity to spearhead the end-to-end lifecycle of multi-million-pound industrial water and wastewater treatment systems, transitioning seamlessly from high-level conceptual design to impactful field deployment. We value entrepreneurial execution, offering a uniquely flat structure where exceptional performance translates directly into accelerated professional development. For an ambitious engineer, this represents an unparalleled launchpad to deploy your expertise, drive visible industrial outcomes, and grow exponentially alongside our expanding UK footprint.. As a Senior Engineer you will hold complete technical ownership over the execution and delivery of high-impact, capital engineering infrastructure ranging from c£1M to £20M. Partnering seamlessly with our Project Management team, you will translate complex challenges into operational, high-performance systems. • Lead Advanced System Design: Spearhead the end-to-end design lifecycle of multi-million-pound treatment systems, serving as the technical anchor for major engineering deliverables from initial concept to final execution., • Mentor & Develop Talent: Coach, mentor, and elevate the capabilities of the core engineering team, fostering a culture of technical excellence, accountability, and continuous professional growth., • Engineering Governance & Review: Serve as the definitive authority for reviewing and approving critical project documentation, including complex P&IDs, fabrication drawings, electrical schematics, and comprehensive Bills of Materials (BOM)., • High-Performance Equipment Selection: Execute advanced hydraulic calculations, precise pump design and selection, and comprehensive valve and instrumentation specifications to guarantee system performance and full contractual compliance, while supporting the sales team with precise cost, labour, and subcontractor estimates for commercial proposals., • Strategic Sourcing & Vendor Governance: Author rigorous technical data sheets, initiate RFQs, collaborate closely with key vendors, and execute data-driven procurement determinations to maintain aggressive project velocity., • Cross-Functional & Commercial Leadership: Drive critical customer- and vendor-facing technical reviews, while partnering seamlessly with the sales team to deliver precise cost, labour, and subcontractor estimates for winning commercial proposals., • Exceptional Total Rewards: We offer a highly competitive base salary complemented by a comprehensive health, wellness, and retirement benefits package, alongside an impactful, performance-driven Project Incentive Plan that directly rewards your engineering successes., • An Elite, Flat Culture: Work alongside leading industry experts in a collaborative, un-siloed environment that actively rejects bureaucratic layers. Here, your technical voice is empowered, and your individual contributions directly shape project outcomes., • Global Project Horizons: Expand your engineering mastery and leadership footprint by delivering on exciting, technologically diverse industrial water and wastewater systems across the UK and key international markets, • Academic Foundation: A Bachelor of Science or Bachelor of Engineering degree, with a strong preference for a discipline in Mechanical, Chemical, or Civil Engineering., • Proven Track Record: A demonstrated history of engineering success and technical achievement within the industrial water, wastewater, or fluid process industries., • Professional Attributes: A highly organized, self-directed professional who thrives in a collaborative, flat organization; possesses top-tier problem-solving acumen, exceptional communication skills, and the polished presence required for high-stakes, customer-facing technical engagements, • Supportive and collaborative culture, • Opportunity for development and career progression, • Private healthcare, • Purchase extra annual leave #J-18808-Ljbffr

Workshop Controller (Automotive) £40,000 - £44,000 + Private Medical Insurance + 4% Pension + Employee Discount + Training + Progression + Overtime Ripley Are you a Workshop Controller, Workshop Foreman or Senior Technician with strong hands-on mechanical skills, looking to take ownership of a bus

Role: Senior Mechanical Design Engineer Salary: 65k+ (DoE) Location: Heanor Hours: 37.5 per week (8:30 - 17:00) • 25 days holiday + Bank Holidays, • WFH Fridays, • 6% Pension Match, • Westfield Healthcare A well-established UK engineering company specialising in the design, manufacture and installation of bespoke mechanical solutions for industrial and infrastructure sectors. The business delivers technically complex, customer-specific projects, combining innovative engineering with high standards of quality, safety and compliance. The Senior Mechanical Design Engineer is responsible for delivering high-quality, compliant mechanical designs on time and to budget. The role combines technical design, engineering leadership, project delivery and customer engagement, with responsibility for ensuring designs meet customer requirements, legislative standards, quality expectations and Health & Safety requirements. As a senior member of the engineering team, the postholder acts as a technical signatory, provides technical guidance to colleagues, mentors junior engineers and contributes to continuous improvement of engineering processes and product development. • Produce bespoke mechanical designs from concept through to detailed manufacture., • Design products and assemblies that satisfy customer specifications, functionality, cost and manufacturability requirements., • Apply mechanical, structural, thermo-fluid, dynamic and acoustic engineering principles where appropriate., • Produce engineering calculations, technical reports, specifications and design documentation., • Verify and validate designs to ensure compliance with relevant engineering standards and legislation., • Carry out site surveys when required to support design activities., • Participate in research and development projects and continuous product improvement., • Act as a Technical Signatory, checking and approving engineering calculations, design submissions and technical documentation., • Review customer and subcontractor technical submissions for quality and compliance., • Interpret engineering standards, specifications and applicable legislation., • Identify hazards and incorporate risk reduction into designs., • Deliver engineering work to agreed programmes, budgets and quality standards., • Manage design activities across assigned projects., • Attend project meetings and provide regular progress updates., • Maintain accurate engineering records and documentation., • Promote value engineering and cost reduction opportunities., • Lead mechanical engineering activities on larger projects., • Mentor and support junior engineers / staff., • Provide technical guidance across the business., • Liaise with customers, suppliers, subcontractors and internal departments., • CAD software (TBC specific packages), • Microsoft Packages (Word, Excel Etc), • SMath Studio, • COMSOL Multiphysics, • Other engineering analysis and documentation tools, • Mechanical Engineering Degree, • Experience in a responsible mechanical engineering position, • Understanding of mechanical engineering principles, • Good understanding of fabrication design details, • Commitment to continued professional development in conjunction with the Company Vision Statement, Departmental Mission Statements, Values, recognised professional standards and the changing requirements of the organisation., • Diploma in Acoustics and Noise Control, • Good pass grades at Advanced level mathematics and physics, • IMechE corporate membership, • IOA membership, • Experience of working to structural design codes, • Knowledge of acoustic and noise control principles, • Design of fabrication details, • Familiar with the requirements of the Construction Design and Management regulations, • Practical use of design techniques of hazard identification and risk reduction, • Familiar with the requirements of European directives such as the Machinery directive and ATEX, • Out of hours, overseas and offshore working may be necessary from time to time. #J-18808-Ljbffr

Our work is guided by our purpose: creating an energy-resilient world for a better future. This purpose embodies the legacy we bring, with more than 100 years as the global leader in energy resilience, delivering solutions critical to sustain and improve life. Our teams have the opportunity to provide a critical resource - energy - that ensures safety, security, and independence for people around the world. Our team members are focused on pushing boundaries, continuing to innovate in an ever-changing landscape, and keeping up with the pace required to create solutions for today's world demands. Our product range includes engines, generators, power conversion, UPS systems, EV components and electrification solutions, microgrid controls and management, and clean energy solutions that serve a broad spectrum of OEM, residential, industrial, and commercial customers. At Rehlko, you have the freedom to identify, create, and deliver solutions - large and small - that help people and communities thrive in the moments that matter. At Rehlko, our team members are the essential energy that powers our organization's success. We are committed to fostering a safe and sustainable work environment where safety is everyone's responsibility. We empower every team member to actively participate in our Zero Is Possible safety culture by encouraging open communication, proactively reporting hazards, following protocols, and suggesting improvements. Join us in creating an energy resilient world for a better future! At Rehlko, our Total Rewards programs are designed to accelerate growth, energize performance, and support a culture of inclusion at every stage of life and work. We offer total rewards that are easily understood, recognize results, enable career mobility, and reflect our commitment to valuing diverse needs in a fast-moving world. We provide: • Competitive compensation and benefits, • Work-life flexibility, • Recognition and rewards, • Development and career opportunities, • A safe and inclusive workplace As a Proposals Engineer, you'll play a key role in supporting our Sales and Projects teams by developing accurate, competitive, and technically robust proposals. You'll work closely with clients, suppliers, and internal stakeholders to interpret requirements, build cost-effective solutions, and ensure seamless handovers into project delivery. • Produce accurate project estimates, bill of materials, and cost build-ups., • Write technical and commercial clarifications as part of tender submissions., • Review existing proposals and highlight key selling points to support the Sales Team., • Interpret client enquiry documents and develop conceptual designs and formal tender responses to strict deadlines., • Review M&E specifications and scopes of supply to ensure compliance and clarity., • Provide ongoing technical clarifications throughout the tender lifecycle., • Support the Sales Team with technical input for proposals, consultant reports, and engine selection., • Prepare and review detailed contract handover files for the Projects Team., • Update internal database systems with communications and feedback., • Obtain compliant quotations from subcontractors and supply chain partners., • Ensure all work aligns with ISO 9001, ISO 14001, and ISO 45001 quality accreditations., • Strong technical understanding of mechanical/electrical systems (power generation experience is a bonus)., • Confidence in interpreting technical drawings, specifications, and tender documents., • Ability to manage multiple tenders simultaneously., • Commercial awareness and problem-solving ability., • A methodical approach with high attention to detail., • Excellent communicator, both in-person and over digital channels., • Strong analytical skills with the ability to break down complex requirements into clear, cost-effective solutions., • Full UK driving licence required., • £50,000 - £60,000 basic salary depending on experience, • Company car and fuel card, • 25 days annual leave + bank holidays, • Private healthcare, • Life assurance (Death in Service), • Long service recognition, • Employee perks and discount platform, • Excellent internal support and investment in your success, • Clear path for career progression in a thriving sector Rehlko proudly offers a rich history steeped in creativity and commitment to our associates and communities, along with competitive benefits and compensation. Our Purpose-Creating an energy resilient world for a better future-and Values: Curiosity, Trust, Pace, and Excellence, are important cultural components that shape the way we work and relate to one another. Learn more about Rehlko at who-we-are. In addition to the investment in your development, Rehlko offers a comprehensive package with competitive salaries and a range of additional benefits. Rehlko is an equal opportunity employer that prohibits discrimination and will make decisions regarding employment opportunities, including, but not limited to, hiring, job assignment, compensation, promotion, benefits, training, discipline, and termination, promote equal opportunities in every aspect of our process. • Curiosity - Seek, learn, share, • Trust - Go farther together, • Pace - Focus to go faster, • Excellence - Find the win every day #J-18808-Ljbffr

Cibsejournal in Heanor is seeking a Senior Mechanical Design Engineer to deliver bespoke mechanical designs from concept to manufacture, ensuring compliance with standards and budget. The role combines technical leadership, project delivery and customer engagement on industrial and infrastructure projects. You will mentor junior engineers, act as a technical signatory and drive continuous improvement while collaborating with suppliers and internal teams. #J-18808-Ljbffr

Location: Ripley, Derbyshire (Onsite) Salary: Up to £45,000 Job Type: Full-Time, Permanent An exciting opportunity has arisen for a Project Engineer to join a growing engineering business delivering bespoke pressure vessels, heat exchangers and engineered solutions to the energy sector. Supporting projects across renewable energy, hydrogen, carbon capture, waste-to-energy and conventional power generation, you'll play a key role throughout the full project lifecycle, from initial concept design through to delivery and commissioning. This position would suit a Mechanical Design Engineer or Project Engineer with pressure vessel design experience who is looking to join an innovative company working on technically challenging projects with genuine career development opportunities. • Design and engineer pressure vessels and associated equipment for industrial applications., • Perform detailed engineering calculations using relevant design codes and standards., • Review customer specifications, drawings and technical requirements., • Support projects from concept design through to manufacture and commissioning., • Produce technical documentation, calculations and manufacturing information., • Attend customer meetings and provide technical support when required., • Work closely with engineering, quality, supply chain and project teams to ensure successful project delivery., • Contribute to continuous improvement and engineering best practice initiatives., • Degree-qualified Engineer or equivalent., • Experience in pressure vessel design and mechanical engineering., • Knowledge of design codes such as ASME VIII, EN 13445, AD2000 or CODAP., • Experience selecting pressure vessel components and instrumentation., • Strong understanding of thermodynamics and engineering fundamentals., • Ability to communicate technical information through calculations, drawings and specifications., • Strong problem-solving and analytical skills., • Full UK driving licence., • Heat exchanger design experience., • Experience using PV Elite, ASPEN, HTRI or Autodesk Inventor., • Knowledge of TEMA, API and ASME standards., • Experience creating or interpreting P&IDs., • Understanding of fabrication and manufacturing processes., • Salary up to £45,000., • Exposure to cutting-edge renewable energy and decarbonisation projects., • Opportunity to work across a diverse range of engineering projects., • Long-term career progression within a growing and successful engineering organisation., • Supportive, collaborative and technically focused environment. If you're looking for a role where you can apply your pressure vessel design expertise to innovative energy projects while developing your career, we'd love to hear from you. #J-18808-Ljbffr

CV Technical is seeking a Multi-Skilled Maintenance Engineer for a double days shift in Ripley. You will cover electrical and mechanical maintenance, reactive breakdown support and planned preventative maintenance across a range of production equipment. You will join a small, skilled team where your expertise is valued and applied in a fast-paced manufacturing environment. The role offers a competitive salary, a monthly bonus, generous holidays and a pension scheme. #J-18808-Ljbffr

Are you a technically skilled civil engineer with a passion for delivering integrated, sustainable solutions? We're looking for a Civil Design Technical Lead to take ownership of civil and structural design elements for water and wastewater treatment projects. You'll manage external consultants, review designs for compliance and buildability, and collaborate with other disciplines to deliver safe, efficient, and cost-effective solutions. From feasibility studies to detailed design and commissioning support, this role offers variety and impact—perfect for someone who combines technical expertise with strong coordination skills. Please note that this role requires you to be in the office 2-3 times a week. The contractual office base is flexible and can be either Ilkeston, Apsley or Glasgow. This can be discussed further at interview. The weekly contractual hours for the role is 40. At Browne, we are engineering with purpose. We are a leading UK contractor delivering specialist engineering, construction and maintenance services across the water, wastewater and civil engineering sectors. From building pipelines and upgrading pumping stations to delivering complex mechanical, electrical, instrumentation, control and automation (MEICA) solutions, we help provide cleaner water, stronger infrastructure and more reliable services for communities across the UK. Our expertise spans the full lifecycle of water and wastewater assets, combining civil engineering, process engineering, power systems, control systems, system integration and long-term maintenance. We work closely with our clients to deliver safe, sustainable and innovative solutions that improve operational performance and support future resilience. We offer a wide range of career opportunities both on site and behind the scenes. Whether your skills are in engineering, project delivery, safety, sustainability, commercial, planning, automation or business support, there's a place for you at Browne. We value different perspectives and experiences, and we're proud to be a Silver Award Investors in Diversity accredited employer. Our teams use smart technology, technical expertise and a hands‑on approach to deliver high-quality outcomes safely and efficiently. From construction and infrastructure projects to advanced control systems and commissioning, we support our clients in solving complex challenges and maintaining essential services. Browne is part of Renew Holdings plc, a UK‑based group of specialist engineering businesses. • A detail‑oriented engineer with strong leadership and coordination skills., • Excellent communicator who can engage effectively with clients and multidisciplinary teams., • Experience in civil design engineering in the water/wastewater sector, • Proven ability to manage and review external consultants and civil works packages., • Knowledge of civil engineering standards, construction methods, and buildability principles., • Degree in Civil Engineering; proficiency in AutoCAD Civil 3D, Revit, or similar., • Understanding of BIM processes and collaborative design environments., • Chartered status (or working towards) and experience in sustainable design desirable. The Company has experienced unprecedented growth over the past few years. We have a vast number of employees, and provide support to clients from all over the country #J-18808-Ljbffr

Applications Engineers – Electrical OR Mechanical Bias Ripley, Derbyshire | £30,000 – £50,000 DOE | Permanent Multiple Opportunities Available Applications Engineering | Mechanical | Electrical | Controls & Instrumentation | Energy & Industrial Projects Are you an experienced Applications Engineer, Proposals Engineer, Mechanical Engineer or Electrical Engineer looking for a role where you can use your technical expertise to develop solutions, influence projects and work directly with customers? Our client is looking to strengthen their growing Sales team with Applications Engineers across both Mechanical and Electrical disciplines. Whether your background is predominantly mechanical engineering or electrical, controls and instrumentation, these are technically challenging and commercially focused positions where you'll take customer requirements and develop them into practical, commercially viable engineering solutions. You'll be involved from initial customer enquiry and technical discussions through solution development, equipment selection, costing and proposal preparation to contract award. Working across complex energy and industrial systems, you'll collaborate with customers, suppliers and multidisciplinary engineering teams on technically interesting UK and international projects. • Review customer specifications, drawings, schematics, data sheets and technical requirements, • Develop engineering solutions in response to customer enquiries, • Produce engineering concepts, calculations and supporting technical documentation, • Assess customer requirements and determine appropriate equipment and technical solutions, • Support equipment and component selection, • Work with suppliers and manufacturers to obtain technical and commercial information, • Support estimating, costing and tender preparation, • Prepare detailed technical proposals and identify suitable alternative solutions where appropriate, • Attend customer meetings and provide technical support throughout the sales process, • Liaise closely with internal engineering and project teams to ensure proposed solutions are practical and achievable, • Maintain accurate records of enquiries, proposals and customer requirements, • Contribute to product development, standardisation, cost reduction and continuous improvement For the Electrical Applications Engineer opportunities, we're particularly interested in candidates with experience or knowledge across: • Electrical engineering, controls and instrumentation, • AC/DC power systems, • Electrical distribution and protection, • Control and instrumentation interfaces, • Electrical equipment selection, • Electrical schematics and technical drawings, • Single-line diagrams, • Load schedules, • Cable schedules, • Electrical calculations and technical documentation You'll use your electrical and C&I knowledge to interpret customer requirements and develop appropriate solutions for complex engineering applications. For the Mechanical Applications Engineer opportunities, we're particularly interested in candidates with a strong mechanical engineering background who can interpret customer requirements and develop appropriate equipment and system solutions. • Mechanical equipment and system design, • Mechanical calculations and technical documentation, • Equipment specification and selection, • Reviewing mechanical drawings, layouts, schematics and data sheets, • Piping and associated mechanical systems, • Pumps, valves, vessels, packaged equipment or rotating equipment, • Materials and component selection, • Understanding design parameters such as pressure, temperature, flow and operating conditions, • Working with suppliers and manufacturers to develop technically suitable solutions, • Supporting costing, quotations, tenders or technical proposals Experience across all of these areas isn't essential; we're interested in engineers who have a strong mechanical foundation and the ability to apply their technical knowledge to customer-specific engineering requirements. We're particularly interested in engineers who can combine strong technical knowledge with commercial awareness and confident customer communication. • At least 2 years' relevant experience within Applications Engineering, Proposals Engineering, Mechanical Engineering, Electrical Engineering or Technical Sales in a relevant industry, • An HND or equivalent qualification in Mechanical Engineering, Electrical Engineering or a related discipline, • A strong mechanical or electrical engineering background, • Experience working within industrial, energy or other complex engineering environments, • The ability to interpret technical specifications, drawings, schematics, data sheets and engineering requirements, • Experience developing engineering solutions around customer and project requirements, • Strong analytical and problem-solving skills, • Good commercial awareness and an understanding of customer requirements, • Excellent communication skills with the confidence to liaise directly with customers and suppliers, • The ability to manage multiple enquiries, priorities and deadlines, • A full UK driving licence and willingness to travel when required Previous experience within gas turbines, carbon capture, hydrogen, energy recovery, power generation, power grid, water or nuclear would be highly advantageous. You'll become involved at the front end of technically complex projects, using your engineering expertise to understand what the customer needs and helping determine the best solution before a contract is awarded. It's an excellent opportunity for an experienced engineer who enjoys problem-solving, technical variety and customer interaction and would like greater commercial involvement without moving away from engineering. • £30,000 – £50,000 salary, dependent on experience, • Competitive bonus scheme, • 5% matched pension scheme, • Private healthcare, • EV salary sacrifice scheme, • Cycle to Work salary sacrifice scheme, • Exposure to complex UK and international engineering projects, • A varied role combining technical engineering, customer interaction and commercial activity, • Career development and opportunities to broaden your technical and commercial expertise Positions: Applications Engineers – Mechanical & Electrical Bias Location: Ripley, Derbyshire Contract: Permanent, full-time Salary: £30,000 – £50,000 DOE Travel: UK and international travel may be required Additional requirements: Occasional out-of-hours support may be required #J-18808-Ljbffr

Eurocell PLC, a market leader for uPVC products, is recruiting at its Ilkeston Recycling site for a Multi Skilled Maintenance Engineer. The role covers 4-on-4-off days/nights with responsibilities across electrical and mechanical maintenance of PLC systems and process equipment. You'll work on DC motors, drives, and plant, performing planned and breakdown maintenance while interpreting drawings, with full driving license required. Excellent benefits and a supportive career path offered. #J-18808-Ljbffr

Holt Recruitment is sourcing a Twilight Shift MET Technician/Strip Fitter for an Ilkeston location. You will remove and refit parts, dismantle and rebuild vehicles, and report unseen damage promptly. The role covers 4-wheel alignment, suspension work, GEOs, diagnostics and all mechanical tasks, with hybrid/training qualifications welcome, including ADAS accreditation. Ideal candidates will have MET Technician or Strip Fitter experience; ATA/NVQ is advantageous but not essential, with a #J-18808-Ljbffr

Shillito Group is seeking a Multi Skilled Maintenance Engineer to join their team. The role covers electrical fault finding on production lines, mechanical maintenance of machinery, and attending emergency breakdowns.

Maintenance Engineer4 on 4 off Days/Nights - 12 hour shifts£56,000Eastwood, Nottinghamshire • Employer pension contribution, • OT paid at 1.5X, • 22 days holiday, • Christmas shutdown, • Training and development We are recruiting for a Multi-Skilled Maintenance Engineer to join a well established manufacturer operating within a high speed, high volume production environment. This role works a 4 on / 4 off rotating shift pattern covering both days and nights. This is a hands on position suited to an experienced engineer who is comfortable working across both mechanical and electrical systems and enjoys working in a busy production setting. The RoleAs part of the Engineering team, you will be responsible for carrying out routine and preventative maintenance across the site, ensuring equipment reliability and minimising downtime. You will also respond to breakdowns, diagnose faults, and carry out repairs efficiently to keep production running smoothly. You will play an active role in supporting the site's Health, Safety and Environmental standards and will assist with risk assessments and PUWER compliance. The role also involves delivering the site's PPM schedule. Teamwork is important in this role, and you will work closely with colleagues to ensure planned workloads are achieved. • At least 3 years' experience in a similar maintenance role within a manufacturing environment, • Strong engineering background within manufacturing, • Ideally multi-skilled in both mechanical and electrical disciplines, • Relevant electrical or electronic qualifications is preferred but not essential, • Good fault-finding and analytical skills #J-18808-Ljbffr

An excellent opportunity for a motivated Electrical Maintenance Engineer. You will be responsible for electrical fault finding, maintenance, and improvement of industrial systems. There will also be some mechanical maintenance involved with this role. Hours: 4 on 4 off. Rotational days and nights, 6am-6pm and 6pm-6am • Electrical fault finding on production machinery and control systems, • Maintenance of electrical equipment including motors, drives, sensors and control panels, • Supporting planned preventative maintenance activities, • Diagnosing breakdowns and restoring equipment safely and efficiently, • Working with PLC-controlled equipment and industrial automation systems, • Supporting electrical upgrades and improvement projects, • Assisting with installation and commissioning of new equipment, • Liaising with specialist contractors and suppliers when required, • Time-served apprenticeship in Electrical Installation, Electrical Maintenance, Engineering Maintenance, or a related engineering discipline, • Electrical qualification to NVQ Level 3 or equivalent, • Strong practical electrical fault-finding skills, • Experience working with industrial electrical systems, • Ability to read and interpret electrical schematics and circuit drawings, • Knowledge of PLC-controlled systems and industrial automation - desirable, • Experience with motors, drives, sensors and control systems- could be an advantage, • Ongoing training and development, • 25 days holiday, plus bank holidays, • Pension Scheme, matched contribution/salary sacrifice, • BHSF healthcare cash plan which allows you to claim towards health costs such as dental and optical as well as physiotherapy and chiropody, • Life Assurance Scheme, • Long Service Awards, • Holiday Purchase Scheme, • Free Parking #J-18808-Ljbffr

Location: Ripley, Derbyshire Employment Type: Full-time, 40 hours/week Sector: Manufacturing / Engineering Salary: £46,400 + Bonus An established manufacturing company based in Ripley is looking for a Project Engineer to join their team and lead end-to-end project delivery for a key product line. This is a pivotal role within a small but high-performing engineering team, offering the chance to own and deliver impactful capital investment projects from concept to completion. The successful candidate will play a central part in managing technical specifications, coordinating multi-disciplinary stakeholders, and ensuring project delivery meets both operational and strategic goals. • Lead all five phases of project management - from feasibility and planning, through execution, monitoring, and final sign-off (FAT/SAT)., • Deliver capital investment projects on time, on budget, and in line with business objectives., • Liaise with internal teams and external suppliers (including international OEMs) to specify, source, and implement new manufacturing equipment., • Own the installation and commissioning process, ensuring all services, utilities, and support infrastructure are prepared in advance., • Manage snagging, aftercare, and documentation to ensure full project closure and knowledge transfer., • Maintain regular communication with key stakeholders, providing weekly updates and formal monthly reporting., • Coordinate contractors, ensure compliance, and manage equipment servicing/critical parts planning via internal systems., • Background in mechanical or electrical engineering with hands-on experience; time-served (e.g. apprenticeship route) in a production or manufacturing environment., • Proven experience in project management within an industrial or engineering setting., • Strong technical understanding and the ability to manage and prioritise multiple project deliverables., • Comfortable preparing technical and investment documentation and communicating clearly across functions and with external partners., • Experience with Factory and Site Acceptance Testing (FAT/SAT)., • Digitally fluent with MS Office, AutoCAD, CMMS, and project planning software., • Highly organized, proactive, and able to work independently to drive results., • Work in a highly impactful role within a supportive, skilled team., • Be a key player in driving long-term operational improvements and strategic investment., • Join a company that values innovation, continuous improvement, and engineering excellence. #J-18808-Ljbffr

Location: Ripley, Derbyshire (Full-Time, Onsite) Salary: Up to £55,000 Are you an experienced Structural Engineer looking to take ownership of complex engineering projects within a growing and innovative organisation? We are recruiting for a Senior Structural Engineer to join a specialist engineering business delivering industrial steel structures and engineering solutions across major energy sector projects. This is an excellent opportunity to work on a diverse range of projects spanning renewable energy, hydrogen, carbon capture, waste-to-energy and conventional power generation facilities. Reporting to the Engineering Manager, you will play a key role in the analysis, design and delivery of industrial steel structures, supporting projects from concept through to completion. You'll collaborate with multidisciplinary engineering teams and contribute to the successful execution of technically challenging projects. • Perform structural analysis and design of industrial steel frame, braced-frame and portal-frame structures., • Carry out detailed engineering calculations including connection design, foundation design and analysis of fabricated structures., • Ensure designs comply with relevant standards and design codes including Eurocodes and ASCE 7., • Review client specifications, drawings and technical requirements., • Support the development of drawings, 3D models and engineering documentation., • Review and check engineering work completed by colleagues., • Participate in technical reviews and provide engineering support to customers and internal stakeholders., • Contribute to continuous improvement initiatives and engineering best practices., • Degree in Civil, Structural or Mechanical Engineering (minimum 2:1)., • 6+ years' structural design experience., • Strong experience in structural analysis of steel structures., • Proficiency with structural analysis software such as Autodesk Robot, ETABS, STAAD Pro or Tekla., • Sound knowledge of Eurocodes and related structural design standards., • Experience in steel connection and foundation design., • Strong analytical and problem-solving skills., • Excellent communication and technical reporting abilities., • Full UK driving licence., • Current UK resident., • Membership of IStructE or ICE, with progression towards Chartership., • Experience with steel shell structures., • FEA experience., • Knowledge of Revit, Navisworks, AutoCAD or IDEA StatiCa., • Understanding of fabrication and manufacturing processes., • Salary up to £55,000 depending on experience., • Opportunity to work on high-profile energy and industrial projects., • Long-term career progression within a growing engineering business., • Exposure to cutting-edge projects across renewable energy, hydrogen and carbon capture sectors., • Collaborative and technically focused engineering environment. #J-18808-Ljbffr

An excellent opportunity for a motivated Electrical Maintenance Engineer. You will be responsible for electrical fault finding, maintenance, and improvement of industrial systems. There will also be some mechanical maintenance involved with this role. Hours: 4 on 4 off. Rotational days and nights, 6am-6pm and 6pm-6am • Electrical fault finding on production machinery and control systems, • Maintenance of electrical equipment including motors, drives, sensors and control panels, • Supporting planned preventative maintenance activities, • Diagnosing breakdowns and restoring equipment safely and efficiently, • Working with PLC-controlled equipment and industrial automation systems, • Supporting electrical upgrades and improvement projects, • Assisting with installation and commissioning of new equipment, • Liaising with specialist contractors and suppliers when required, • Time-served apprenticeship in Electrical Installation, Electrical Maintenance, Engineering Maintenance, or a related engineering discipline, • Electrical qualification to NVQ Level 3 or equivalent, • Strong practical electrical fault-finding skills, • Experience working with industrial electrical systems, • Ability to read and interpret electrical schematics and circuit drawings, • Knowledge of PLC-controlled systems and industrial automation - desirable, • Experience with motors, drives, sensors and control systems- could be an advantage, • Ongoing training and development, • 25 days holiday, plus bank holidays, • Pension Scheme, matched contribution/salary sacrifice, • BHSF healthcare cash plan which allows you to claim towards health costs such as dental and optical as well as physiotherapy and chiropody, • Life Assurance Scheme, • Long Service Awards, • Holiday Purchase Scheme, • Free Parking #J-18808-Ljbffr

Envirogen Group in Alfreton CP is seeking a Senior Mechanical Engineer to design and develop components for water and wastewater treatment solutions. A technical qualification in mechanical or chemical engineering is required, along with industry experience.

Browne Group is seeking a Mechanical Design Engineer to design, develop, and optimise mechanical systems for water and wastewater projects. You will work across the full project lifecycle from concept through detailed design to commissioning, collaborating with Civil, EICA, and Process engineers to deliver robust solutions. The role requires on-site or office presence at least 3 days per week. We value accuracy, teamwork and a proactive approach to evolving engineering practices. #J-18808-Ljbffr

Our client, a well‑established family‑run independent garage in Ilkeston, Derbyshire, is seeking an experienced Diagnostic Vehicle Technician to join their reputable team. This is an outstanding opportunity for a skilled Diagnostic Vehicle Technician to progress within a supportive and friendly environment, offering long‑term career development. • Salary of up to £43,000 depending on experience, • Higher earning potential for senior technicians or MOT testers, • Overtime opportunities, • Paid MOT training for the right individual, • Paid training days each year, • Ongoing training and professional development, • Monday to Friday working hours, 8:00am - 5:30pm, • -1 in 2 Saturdays, 8:00am - 12:30pm, • Family‑run business with a strong local reputation, • Friendly, supportive working environment, • Long‑term career progression opportunities, • Carry out advanced vehicle diagnostics using manufacturer and aftermarket diagnostic equipment, • Accurately identify mechanical, electrical, and electronic faults as the Diagnostic Vehicle Technician, • Interpret fault codes, live data, wiring diagrams, and technical information, • Conduct systematic fault‑finding to determine root causes of complex issues, • Complete diagnostic reports detailing findings and recommended repairs, • Provide technical guidance and support to other technicians as the Diagnostic Vehicle Technician, • Carry out servicing, maintenance, and repairs as necessary, • Ensure all work is completed safely, efficiently, and to high standards, • Maintain a clean, safe, and organised workshop environment, • Work collaboratively with the team to ensure timely completion of vehicle repairs, • Previous experience as a Diagnostic Vehicle Technician or Highly Skilled Vehicle Technician is essential, • Proficient in using diagnostic equipment and fault‑finding systems, • NVQ Level 3 or equivalent qualification is desirable, • Strong mechanical, electrical, and electronic diagnostic knowledge, • Excellent attention to detail and a pride in workmanship, • Ability to diagnose complex faults accurately and efficiently, • Good communication skills and teamwork ability, • Must be reliable, hardworking, and able to work independently, • Seeking a stable, long‑term role within a supportive independent garage #J-18808-Ljbffr

Rehlko is seeking a tender and project estimator with strong mechanical and electrical systems knowledge to support bids and project handover. You will produce cost build-ups, refine proposals, and provide technical clarifications throughout the tender lifecycle. Role involves reviewing specifications, supporting the sales team, and coordinating with subcontractors, all while ensuring ISO 9001/14001/45001 standards are met. #J-18808-Ljbffr

Job Title: Multi Skilled Maintenance Engineer Location: Ilkeston Salary: £52,000 Shift: 4 on 4 off A superb opportunity has arisen for a Multi Skilled Maintenance Engineer to join a supportive and collaborative engineering team within a busy manufacturing site. The company prides itself on a positive working culture where teamwork and mutual respect are at the centre of daily operations. You will be responsible for both electrical and mechanical maintenance, responding to breakdowns, completing planned preventative maintenance, and supporting continuous improvement initiatives across site machinery. This is a fantastic opportunity for an engineer looking to develop their technical skills and progress their career within a stable and growing manufacturing business. You will work closely with the wider engineering and production teams to minimise downtime, improve equipment reliability and ensure the site continues to operate safely and efficiently. Sector – Factory Maintenance • Multi-skilled maintenance experience within an industrial manufacturing environment., • Hands-on experience with planned, reactive and breakdown maintenance in a fast-paced industrial factory., • Strong electrical and mechanical fault-finding ability., • Experience working on automated production machinery and industrial equipment., • Ability to diagnose faults quickly and effectively to minimise production downtime., • Electrical and mechanical fault-finding experience., • Level 3 Electrical qualification., • Experience working within a manufacturing environment., • Experience carrying out planned preventative maintenance and reactive maintenance., • Ability to work effectively as part of an engineering team., • Strong understanding of health and safety within an industrial environment., • Good problem-solving and fault-finding skills., • Previous experience working as a Maintenance Engineer in the UK., • Experience working with PLCs, ideally being able to fault-find using inputs and outputs., • Experience working with automated production machinery., • Experience with sensors, motors, drives, conveyors and control systems., • Experience with continuous improvement and reducing machinery downtime., • Experience working within a fast-paced manufacturing or production environment., • Working for a recognised market-leading business., • Excellent benefits package including pension, life insurance and gym access., • Training and development opportunities for engineers., • Working within a supportive and collaborative engineering team., • Opportunity to develop both electrical and mechanical engineering skills., • Stable employment within an established manufacturing business., • Modern and well-maintained manufacturing facilities., • Opportunity to contribute to continuous improvement and reliability projects. #J-18808-Ljbffr

HOURS: 4on4off, Continental Days and Nights - 07:00 -19:00, 19:00 - 07:00 SALARY: £48,179.04 plus shift allowance and excellent benefits • Healthcare Cash Plan, • 3x Salary Life Assurance, • High Street Discounts, • Staff Discount BASE: Eurocell Recycling, llkeston, Derbyshire Eurocell are a stock market listed Plc and the market leader for uPVC products within the building industry. We know that our people are our greatest asset, we are successful, dynamic, ambitious and looking for great team players to grow with us. As we continue to strengthen our Engineering team, we are delighted to be recruiting for a Multi Skilled Maintenance Engineer within our Ilkeston based Recycling site, working 4 on 4 off Days/Nights. • Maintenance of DC motors and associated drives, • Maintenance of process control equipment, • Electrical installations and/or mechanical installation work, • Carrying out planned and preventative maintenance systems (mechanical and electrical), • Breakdown maintenance involving fault finding on industrial and process control systems, • Carry out electrical and mechanical repairs on PVCu recycling extrusion plant and process equipment, • Mechanical and Electrical installation and maintenance experience, • Recognised Electrical / Mechanical maintenance apprenticeship / training scheme Level 3, • Understand and be able to interpret mechanical and electrical drawings, • Previous experience of maintenance and repair of PLC systems, • Full Driving license required, • You will be rewarded with a very competitive basic salary, • 25 days holiday, plus statutory holidays - normally 33 days in total each year, • Free Healthcare plan for all employees, • Enhanced Maternity and Paternity benefit, • Free Life Assurance Plan of 3x your Annual Salary Christmas shutdown, • Option to join the Eurocell Share Save Scheme at discounted rates, and share in our company success, • Company Pension Plan, • Employee discount on Eurocell products, • Discounts across many well-known online and high street retailers, • A blend of training, including e-learning and on the job training to help your career development, • Care First Employee Assistance Programme, available 24 hours a day, 365 days a year for confidential support and advice, if and when you need it, • Colleague Referral Programme; we pay you for successfully referring people to join our team, • Excellent opportunities to grow with us, and progress your career #J-18808-Ljbffr

Salary: £40,000 - £55,000 per annum Location: Alfreton Hours: Monday to Friday, Full Time (No Shift Pattern) Annual Leave: 25 Days Holiday + Bank Holidays Envirogen is a leading international water treatment solutions business, helping customers across a range of industries address their water and wastewater challenges through innovative and sustainable solutions. We're looking for an experienced and motivated Workshop Supervisor to join our growing team. This is an excellent opportunity for a hands‑on leader who enjoys developing people, improving processes, and ensuring workshop operations run safely and efficiently. If you're looking for a role where you can make a genuine impact while enjoying a great work‑life balance with Monday to Friday hours and no shift work, we'd love to hear from you. As Workshop Supervisor, you'll take ownership of the day‑to‑day management of our workshop, ensuring equipment, assets, and vehicles are maintained to the highest standards. Your responsibilities will include: • Leading, motivating, and developing a team of technicians and mechanics, • Planning and coordinating workshop activities, repairs, and maintenance schedules, • Ensuring all work is completed safely, efficiently, and to a high standard, • Managing workshop resources, tools, equipment, and spare parts inventory, • Monitoring productivity and driving continuous improvement initiatives, • Supporting water and wastewater treatment projects through effective workshop operations, • Ensuring compliance with Health & Safety policies and procedures, • Maintaining accurate service, maintenance, and inspection records, • Collaborating with operational and project teams to meet business objectives We're seeking a proactive leader who can balance technical expertise with excellent people management skills. You’ll ideally have: • Previous experience in a Workshop Supervisor, Workshop Manager, Maintenance Supervisor, or similar role, • Strong mechanical maintenance and repair knowledge, • Experience leading and developing technical teams, • Excellent organisational and planning skills, • A positive, solution‑focused approach, • Strong understanding of health, safety, and quality standards, • Good communication skills and the ability to build effective working relationships Experience within the water, wastewater, industrial, engineering, manufacturing, plant hire, utilities, or related sectors would be highly advantageous. • Competitive salary of £45,000 - £55,000, • Monday to Friday working pattern with no shifts, • 25 days annual leave plus bank holidays, • Opportunity to work for a respected and growing international business, • Supportive, collaborative, and friendly working environment, • Interesting and varied projects across the water treatment sector, • Career development opportunities and ongoing training, • The opportunity to contribute to sustainable environmental solutions, • Proven experience as a workshop supervisor or similar leadership role, • Strong knowledge of mechanical and electrical maintenance practices, • Excellent organizational and team management skills, • Ability to prioritize tasks and manage multiple projects, • Experience in water, wastewater, or industrial environments preferred, • Strong commitment to safety and quality standards, • Relevant technical qualifications or certifications, • 25 Days holiday plus bank holidays and you are able to purchase more, • Private healthcare #J-18808-Ljbffr

Shillito Group is seeking an Electrical Maintenance Engineer in the United Kingdom. The role covers fault finding, maintenance and improvement of industrial electrical systems, with some mechanical tasks. The position operates on a 4 on 4 off shift pattern (6am-6pm and 6pm-6am) to support continuous production. You will work with motors, drives, sensors and control panels, perform planned maintenance, and assist with installation and upgrades. #J-18808-Ljbffr

We’re looking for a Maintenance Engineer to join an automated factory in Desford, working Monday to Friday on a 10-hour day shift pattern. This is a great opportunity for an engineer looking for excellent earning potential, no weekends, no bank holiday working and genuine career development. • 29 days’ holiday per year, including bank holidays, • Overtime on tap all paid at 1.5X, • 8% pension contribution, • No bank holiday working, • No working over Christmas You’ll work a rotating two-week pattern: • Week 1:06:00–16:00, • Week 2:08:00–18:00, • Monday to Friday, • 10-hour shifts The basic contract rate is £17.16 per hour (40 hours), with additional hours paid at £25.74 per hour (10 hours). Based on the standard 40 hours plus 10 hours at the enhanced rate, earnings are approximately: Weekly: £943.80 • Yearly: £49,077 (basic salary), • With average bonus £56,000 The bonus is linked to the amount of product stacked in the yard — essentially, the more product the factory produces and stacks, the bigger the bonus. The average weekly production bonus paid to maintenance staff so far this year is £137.21. We’re looking for a hands-on maintenance engineer with a mechanical bias. Ideally, you’ll have: • Experience working with hydraulics and pneumatics, • Strong fault-finding and problem-solving skills, • A background in heavy industry or manufacturing would be ideal, although this isn’t essential, • The ability and willingness to work across both mechanical and electrical disciplines, • A practical, hands-on approach and the confidence to work in a busy, automated environment This is more than just another maintenance position. You’ll be working within a highly automated factory in Desford, with plenty of opportunity to develop your skills and progress your career. A great salary, enhanced overtime, a strong benefits package and a Monday-to-Friday working pattern, it’s a particularly attractive opportunity for an engineer looking to take your next step. #J-18808-Ljbffr

Up to £50,000 + Uncapped Bonus + Excellent Benefits (Ilkeston) • Removing and refitting parts to ensure body repairs are to a very high standard, • Dismantle and rebuild vehicles as instructed, • To report unseen damage, absent from estimate as soon as its identified, • 4 wheel alignment, Suspension work, GEO's, diagnostics and all mechanical work, • Have Previous experience as an MET Technician / Strip Fitter, • ATA / NVQ is advantageous but not essential, • Hybrid Trained, • ADAS Accredited, • Paying up to £50,000 per hour plus bonus, • Individual bonus available, • Monday to Friday, • fantastic uncapped monthly bonus schemes, • 24 days holiday plus Bank Holidays, • free life assurance, • exclusive employee vehicle-leasing schemes, • pension & save-as-you-earn share scheme, • A Benefits App giving a huge range of retailer discounts and cashback deals, • well-being services, • Permanent Vacancy #J-18808-Ljbffr

ROLE: Multi Skilled Engineer HOURS: 4on4off, Nights 19:00 - 07:00 SALARY: £48,179.04 plus shift allowance and excellent benefits BENEFITS: Healthcare Cash Plan, 3x Salary Life Assurance, High Street Discounts, Staff Discount BASE: Eurocell Recycling, llkeston, Derbyshire Eurocell are a stock market listed Plc and the market leader for uPVC products within the building industry. We know that our people are our greatest asset, we are successful, dynamic, ambitious and looking for great team players to grow with us. As we continue to strengthen our Engineering team, we are delighted to be recruiting for an additional Multi Skilled Maintenance Engineer within our Ilkeston based Recycling site, working 4 on 4 off Nights. WHAT OUR MULTI SKILLED MAINTENANCE ENGINEERS DO: • Maintenance of DC motors and associated drives, • Maintenance of process control equipment, • Electrical installations and/or mechanical installation work, • Carrying out planned and preventative maintenance systems (mechanical and electrical), • Breakdown maintenance involving fault finding on industrial and process control systems, • Carry out electrical and mechanical repairs on PVCu recycling extrusion plant and process equipment WHAT WE NEED FROM OUR MULTI SKILLED MAINTENANCE ENGINEERS: • Mechanical and Electrical installation and maintenance experience, • Recognised Electrical / Mechanical maintenance apprenticeship / training scheme Level 3, • Understand and be able to interpret mechanical and electrical drawings, • Previous experience of maintenance and repair of PLC systems, • Full Driving license required WHAT WE OFFER OUR MULTI SKILLED MAINTENANCE ENGINEERS: • You will be rewarded with a very competitive basic salary, • 25 days holiday, plus statutory holidays - normally 33 days in total each year, • Free Healthcare plan for all employees, • Enhanced Maternity and Paternity benefit, • Free Life Assurance Plan of 3x your Annual Salary Christmas shutdown, • Option to join the Eurocell Share Save Scheme at discounted rates, and share in our company success, • Company Pension Plan, • Employee discount on Eurocell products, • Discounts across many well-known online and high street retailers, • A blend of training, including e-learning and on the job training to help your career development, • Care First Employee Assistance Programme, available 24 hours a day, 365 days a year for confidential support and advice, if and when you need it, • Colleague Referral Programme; we pay you for successfully referring people to join our team, • Excellent opportunities to grow with us, and progress your career JBRP1_UKTJ

Our work is guided by our purpose: creating an energy-resilient world for a better future. This purpose embodies the legacy we bring, with more than 100 years as the global leader in energy resilience, delivering solutions critical to sustain and improve life. Our teams have the opportunity to provide a critical resource – energy – that ensures safety, security, and independence for people around the world. Our team members are focused on pushing boundaries, continuing to innovate in an ever-changing landscape, and keeping up with the pace required to create solutions for today’s world demands. Our product range includes engines, generators, power conversion, UPS systems, EV components and electrification solutions, microgrid controls and management, and clean energy solutions that serve a broad spectrum of OEM, residential, industrial, and commercial customers. At Rehlko, you have the freedom to identify, create, and deliver solutions – large and small – that help people and communities thrive in the moments that matter. At Rehlko, our team members are the essential energy that powers our organization’s success. We are committed to fostering a safe and sustainable work environment where safety is everyone’s responsibility. We empower every team member to actively participate in our Zero Is Possible safety culture by encouraging open communication, proactively reporting hazards, following protocols, and suggesting improvements. Join us in creating an energy resilient world for a better future! • Competitive compensation and benefits, • Work-life flexibility, • Recognition and rewards, • Development and career opportunities, • A safe and inclusive workplace We are seeking an experienced Project Manager / Senior Project Manager to join our expanding Projects team. This is an exciting opportunity to take the lead on generator installation projects across the UK and Europe, acting as both principal and sub-contractor. You will be responsible for ensuring projects are delivered safely, efficiently, and to the highest quality standards, while building strong client relationships and managing resources effectively. The role requires regular travel to project sites across the UK and Europe, with all travel, hotel, and food expenses fully covered. • Manage multiple generator installation projects simultaneously, from handover through to commissioning., • Attend project handovers and review scope, delivery, and client requirements., • Build and maintain strong client relationships, ensuring satisfaction and repeat business., • Coordinate engineers, subcontractors, and suppliers for efficient project delivery., • Monitor budgets, financial performance, and cash flow., • Ensure compliance with ISO9001, ISO14001, and ISO45001 standards., • Maintain accurate project records using CRM systems (e.g., Protean)., • Oversee purchase orders, invoicing, and supplier management., • Support the development and appraisal of project administrators and engineers., • Travel regularly to project sites across the UK and Europe (expenses covered)., • Strong background in project delivery within mechanical, electrical, or construction sectors., • Experience in generator projects desirable, but not essential., • Proven track record in managing budgets, schedules, and client relationships., • Excellent problem-solving skills with a proactive and adaptable approach., • Competent in using IT systems and project management software., • Confident communicator with strong organisational skills., • Flexible and willing to travel extensively across the UK and Europe., • Competitive salary., • 28 days holiday plus bank holidays., • Company vehicle or car allowance., • Private healthcare., • All travel, food, and hotel expenses covered when working away (UK & Europe)., • Death in Service benefit., • Outstanding Employee Assistance Programme., • Clear senior progression paths within a global business. Rehlko proudly offers a rich history steeped in creativity and commitment to our associates and communities, along with competitive benefits and compensation. Our Purpose—Creating an energy resilient world for a better future—and Values: Curiosity, Trust, Pace, and Excellence, are important cultural components that shape the way we work and relate to one another. Learn more about Rehlko at who-we-are. In addition to the investment in your development, Rehlko offers a comprehensive package with competitive salaries and a range of additional benefits. Rehlko is an equal opportunity employer that prohibits discrimination and will make decisions regarding employment opportunities, including, but not limited to, hiring, job assignment, compensation, promotion, benefits, training, discipline, and termination, promote equal opportunities in every aspect of our process. • Curiosity – Seek, learn, share, • Trust – Go farther together, • Pace – Focus to go faster, • Excellence – Find the win every day #J-18808-Ljbffr

Sales Manager Location: Derbyshire (Office Based with UK & European Travel) Salary: £50,000 - £60,000 + Car Allowance + Bonus + Private Healthcare + Excellent Benefits Drive Growth in a Global Engineering Business We are partnering with a highly successful, international engineering organisation that designs and supplies specialist systems and solutions to the global energy sector. Operating across power generation, hydrogen storage, carbon capture, waste-to-energy, oil & gas, and industrial markets, the business has experienced exceptional growth, increasing turnover significantly over recent years and continuing to invest in its sales capability. With ambitious plans for further expansion, they are now seeking a Sales Manager to drive the growth of their specialist filtration division, supporting key customers and developing new opportunities across the UK and Europe. The Opportunity This is a strategic sales position with responsibility for developing and managing relationships within the power generation, oil & gas, and wider energy sectors. You will inherit an established customer base while also identifying and winning new business opportunities to support ambitious revenue growth plans. Working closely with engineering, project management, quality, and supply chain teams, you will play a key role in delivering technically focused filtration solutions for some of the world's leading industrial operators. Key Responsibilities • Develop and grow sales within existing customer accounts across the energy sector., • Identify, engage, and secure new business opportunities within power generation, oil & gas, hydrogen, and industrial markets., • Build long-term relationships with key stakeholders and decision makers., • Generate quotations and commercially competitive proposals., • Review customer specifications, technical documentation, and project requirements., • Support marketing initiatives, exhibitions, trade events, and customer presentations., • Maintain accurate CRM records and sales pipeline activity., • Conduct customer visits, site surveys, and condition assessments where required., • Work collaboratively with internal engineering and project teams to ensure successful project delivery., • Achieve and exceed order intake and revenue targets. About You We are interested in speaking with ambitious sales professionals who have experience within technical or engineering-led industries. You may currently be working as a: • Sales Manager, • Business Development Manager, • Account Manager, • Key Account Manager, • Technical Sales Engineer Experience within one or more of the following sectors would be highly advantageous: • Industrial Filtration, • Gas Turbines, • Power Generation, • Oil & Gas, • Rotating Equipment, • Mechanical Components, • Process Equipment, • Industrial Consumables, • Energy Infrastructure Requirements • Experience in a sales, account management, or business development role., • Proven track record of delivering revenue growth and managing customer relationships., • Strong commercial awareness and negotiation skills., • Ability to understand technical products and solutions., • Knowledge of power generation, gas turbines, or filtration systems is highly desirable., • Full UK Driving Licence., • Willingness to travel regularly throughout the UK and Europe (approximately 40-50% of the time). What's on Offer? • £50,000 - £60,000 basic salary, • £5,000 car allowance, • Company profit share / bonus scheme, • Private healthcare, • 5% matched pension contribution, • Life assurance, • 24 days holiday plus bank holidays, • EV salary sacrifice scheme, • Genuine progression opportunities within a rapidly growing international organisation Join a Business Going Places This is an excellent opportunity to join a fast-growing engineering organisation with ambitious expansion plans, innovative products, and exposure to some of the most exciting sectors shaping the future of global energy. If you are an ambitious sales professional looking for a role that combines account development, new business generation, international markets, and long-term career progression, we would love to hear from you. ATA Recruitment are working exclusively with this client we will be conducting a short list starting today, we will conduct the 1st interview over the phone, and the successful candidates will then be forwarded to our client with our recommendation. If you wish to be considered for this opportunity then please respond with your intention as we are looking to fill this role in the not-so-distant future, you will then be contacting by one of our Recruitment Consultant who will be able to provide more details. Contact: Bav Patel Recruitment Consultant ATA Recruitment specialises in Manufacturing, Infrastructure, Civil, Transportation and general Engineering recruitment on both a permanent and contract basis – for more opportunities like this one, visit our website. By applying you accept the terms of our Privacy Notice which can be found on our website ATA is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation JBRP1_UKTJ

Kit Design Engineer - Automotive Location: Alfreton, Derbyshire Salary: Competitive, DOE Contract: Permanent, Full-time Hours: Monday to Friday, 39 hours per week Benefits: Pension Scheme, 31 days' holiday including statutory days, additional holidays for length of service, Life Insurance, Profit Related Pay, Employee Assistance Programme, on-site parking, holiday purchase scheme and car lease scheme. About Us Autochair Ltd specialise in the design and manufacture of vehicle adaptations that help people with mobility issues get into and out of their cars. For the customers we support, our products provide the opportunity to maintain — and in many cases regain — their independence. With more than 40 years' experience, we have developed and manufactured a wide range of vehicle adaptations, from boot hoists to hand controls. The Opportunity If you're looking for a change, love practical engineering design and don't want to be sat behind a desk all day, this could be the role for you. We're looking for a confident and self-motivated Kit Design Engineer to join our team and develop new kits for our vehicle adaptation products. You'll design vehicle-specific adaptations with a focus on customer usability, ease of installation and manufacturing repeatability, while using your engineering knowledge and practical problem-solving skills to develop effective solutions. This is a varied, hands-on role where you'll combine CAD and technical design with vehicle surveys, fabrication, installation and practical engineering. You'll need to be comfortable working to deadlines, tackling problems logically and finding innovative solutions. The Role As a Kit Design Engineer, you'll: • Support the development of vehicle-specific adaptation kits across our full range of products., • Design kits to the highest standards, balancing ease and speed of installation with manufacturing repeatability., • Carry out vehicle surveys, measurements, photography and dimensional data capture., • Populate and maintain accurate vehicle, kit and component information., • Install and configure mobility products and associated equipment into customer vehicles., • Support the creation and maintenance of FAT documentation and other technical records., • Assist with identifying required components and supporting parts ordering., • Develop your practical engineering and kit design skills., • Create jigs for new kit designs where required., • Help develop and improve the kit design process, ensuring the team delivers high-quality designs efficiently and consistently. About You We're looking for someone with a strong mechanical and practical engineering background who enjoys getting hands-on and solving problems. You'll ideally have: • Engineering experience., • The ability to read and create technical drawings., • Experience using CAD systems., • A strong mechanical bias and confidence using power tools., • Fabrication skills, including cutting steel, grinding and welding., • Solid knowledge of vehicle construction and functionality., • Good Microsoft Office skills., • A logical and innovative approach to problem solving., • The ability to work independently, manage deadlines and take ownership of your work., • Good communication skills and the confidence to deal directly with customers when required. A full driving licence is essential for this role. Why Join Us You'll be joining a long-established business where engineering has a direct and meaningful impact on people's lives. This is an excellent opportunity for someone who wants to combine design, CAD and engineering with hands-on practical work, while developing specialist knowledge within the mobility and automotive sector. If you're technically minded, enjoy working with vehicles and want a role where every project presents a different engineering challenge, we'd love to hear from you. Apply today! No agencies please. JBRP1_UKTJ

Printing our own 3D prototypes. And becoming more agile in every dimension of our daily work.Both count. Both are us. • The successful applicant will work within the department that is responsible for all current model, new product introduction, engineering, and continuous improvement activities within the plant., • You will be part of a team of engineers collaborating across functions, from Production, Quality, Supply Chain, and maintenance, both locally and with group colleagues., • Driving actions with cross functional teams to improve all KPIs for the plant, ensuring production attainment, efficiency, quality, and scrap reduction objectives are achieved., • Manage and implement engineering change requests from design to production., • Support electro-pneumatic production test equipment and monitoring of key plant and process parameters, recommending data derived corrective actions as required., • Working with NPI Project engineers to implement new products and process improvements to existing and new production lines., • A background in a Mechanical / Electrical / Process engineering discipline is required and the relevant practical experience in a manufacturing environment., • Ideally educated to degree level but individuals with HNC, relevant qualifications and industrial experience will be considered., • Experience of automated assembly management systems and production IT systems., • A proven track record as a process / manufacturing engineer delivering significant value to an organisation and having a sense of urgency to deliver to your internal customers solutions on time and to requirement., • Ability to work effectively and communicate with cross-functional teams and being a key team player is essential to this role; you will need to have good interpersonal skills and be a proactive engineer able to work with all levels of an organisation., • Possess a practical approach to problem solving using A3 / 8D problem solving methodology, analytical with experience of robust data driven decisions., • We offer our employees an attractive remuneration package, 25 days holiday plus bank holidays and bonus opportunities., • We offer a generous pension scheme which enables our employees to have greater financial security when they do retire., • For our employee’s peace of mind, we provide a death in service benefit and the option of subsidised private health care., • The safety of our employees is paramount and Vaillant Industrial are proud to have received the ROSPA Gold medal award for the 10th consecutive year and the resultant Presidents Award., • We pride ourselves on our family friendly policies designed to support our employees during important life events., • The health of our employees is important, we provide free eye test vouchers, Health MOT’s, NHS Health checks and flu vaccinations to all. We take care of a better climate. In every home and our environment. As a successful family business, we have been living up to this claim for over 150 years. We are one of the world's leading providers of heat pumps, digital services and efficient gas heating appliances and offer energy-saving solutions. You will find sustainability everywhere at the Vaillant Group. In the office, at the production sites and on the road. Around 16,000 employees from over 70 countries are committed to this every day. As an international team, we take responsibility - for our future and that of our planet. We promote your personal development so that you can act with passion and together we can ensure a better climate. Become part of the Vaillant Group and help us shape the future of heating! We rely on digital application processes – not only to work more efficiently, but also to help conserve resources. Therefore, we kindly ask you to apply online only. #J-18808-Ljbffr

Home » Civil » Utilities » Mechanical Design Engineer Salary: £45,000 - £50,000 Location: Ilkeston Region: Midlands Pinnacle Recruitment are currently looking for a Mechanical Design Engineer for one of the main contractors within the Water & Utilities sector. You will be directing, co-ordinating, initiating, planning, executing, monitoring & control of all mechanical aspects of primarily clean water design projects. You will be; • Mechanical design of infrastructure related primarily to clean water treatment plants ensuring it is compliant with clients specifications and standards, • Producing design deliverables including, but not limited to, P&IDs, hydraulic calculations, pipework layouts, pipework schedules, P&E schedules, Pipe supports/thrust design, Mechanical GAs and layouts, • Liaising with designers from different disciplines to ensure the design package is complete and concise, • Compilation of mechanical specifications and datasheets for procurement of mechanical equipment (pumps, valves, pipework, screens etc), • Reviewing technical submissions, • Presenting technical data or project results to both technical and non-technical Clients and Colleagues, • Maintaining design input throughout the project lifecycle– from the feasibility stage, to outline and detail design, through to construction and handover, • Assist with controlling and managing budgets at project level Ensuring compliance with design/specifications and standard You will need the below; • Experience in a similar role, preferably clean water based, • Mechanical Engineering degree – Essential, • BTEC HNC/HND in an engineering field as a minimum, • EUSR water hygiene card, • Competent in using Microsoft Word & Excel, • Full UK driving licence Title Name Address Postcode Your Email Attach CV #J-18808-Ljbffr

Ready to play a key role in delivering innovative engineering solutions for critical infrastructure projects? We are seeking an experienced and motivated EICA Design Engineer to join our team and contribute to the successful delivery of electrical, instrumentation, control and automation designs across a diverse project portfolio. As an EICA Design Engineer, you will be responsible for developing high-quality engineering designs that meet client requirements and project objectives. Working closely with multidisciplinary teams, you will produce technical documentation, specifications, calculations and drawings, ensuring compliance with relevant standards, regulations and best practice. You will provide technical support throughout the project lifecycle, helping to identify and resolve design challenges while contributing to the safe, efficient and successful delivery of projects. • Experience in EICA design within the water, utilities, industrial, energy or infrastructure sectors, • Strong understanding of electrical, instrumentation, control and automation systems, • Ability to develop practical engineering solutions and resolve technical challenges, • Excellent communication and collaboration skills, • Strong attention to detail and commitment to delivering quality work At Browne, we are engineering with purpose. We are a leading UK contractor delivering specialist engineering, construction and maintenance services across the water, wastewater and civil engineering sectors. From building pipelines and upgrading pumping stations to delivering complex mechanical, electrical, instrumentation, control and automation (MEICA) solutions, we help provide cleaner water, stronger infrastructure and more reliable services for communities across the UK. Our expertise spans the full lifecycle of water and wastewater assets, combining civil engineering, process engineering, power systems, control systems, system integration and long-term maintenance. We work closely with our clients to deliver safe, sustainable and innovative solutions that improve operational performance and support future resilience. We offer a wide range of career opportunities both on site and behind the scenes. Whether your skills are in engineering, project delivery, safety, sustainability, commercial, planning, automation or business support, there's a place for you at Browne. We value different perspectives and experiences, and we're proud to be a Silver Award Investors in Diversity accredited employer. Our teams use smart technology, technical expertise and a hands‑on approach to deliver high‑quality outcomes safely and efficiently. From construction and infrastructure projects to advanced control systems and commissioning, we support our clients in solving complex challenges and maintaining essential services. Browne is part of Renew Holdings plc, a UK‑based group of specialist engineering businesses. • Degree, HND or equivalent qualification in Electrical Engineering, Control & Instrumentation, or a related discipline, • Knowledge of relevant engineering standards and health and safety requirements, • Experience producing technical specifications, calculations and engineering drawings, • Professional membership or working towards Incorporated or Chartered Engineer status is desirable This is an exciting opportunity to work on challenging and rewarding projects within a supportive and forward‑thinking environment. You'll have the chance to develop your expertise, collaborate with talented professionals and make a meaningful contribution to projects that improve and maintain essential services. #J-18808-Ljbffr

Envirogen is seeking an experienced and motivated Workshop Supervisor to lead our workshop operations. As a key member of our team, you will be responsible for overseeing daily workshop activities, ensuring efficient maintenance and repair processes, and promoting a safe and productive work environment. We are a leading UK based international water treatment solutions business. We offer an interesting and varied working environment that is supportive and collaborative. In this role, you will manage a team of technicians and mechanics, coordinate repair schedules, maintain inventory of parts and equipment, and collaborate with other departments to support our water and wastewater treatment projects. Your leadership will be essential in driving continuous improvement and maintaining high standards of quality and safety. The ideal candidate will have a strong background in workshop supervision, excellent organizational skills, and proven ability to lead and motivate a technical team. Experience in the water, wastewater, or industrial sectors is highly desirable. If you are a proactive leader passionate about operational excellence and team development, consider joining Envirogen to contribute to innovative environmental solutions. • Proven experience as a workshop supervisor or similar leadership role., • Strong knowledge of mechanical and electrical maintenance practices., • Excellent organizational and team management skills., • Ability to prioritize tasks and manage multiple projects., • Experience in water, wastewater, or industrial environments preferred., • Strong commitment to safety and quality standards., • Relevant technical qualifications or certifications., • 25 Days holiday plus bank holidays and you are able to purchase more, • Private healthcare #J-18808-Ljbffr

CapEx Project Engineer (Manufacturing) £45,000 - £50,000 + 3k Bonus + 34 Days Holiday + Company Benefits Belper Are you a Project Engineer from a manufacturing background looking to join a world-leading company, offering a role where you will be working on multi million pound projects? In this role you will be planning and managing a range of CapEx projects, overseeing budgets, schedules, and quality. You will be improving manufacturing efficiencies, generating progress reports for stakeholders, and making a positive difference in the future success of a global company. Founded nearly 100 years ago, this global business specialises in the manufacturing of a wide range of building materials. Priding themselves on their international success, they have multiple sites in over 20 countries, with clear goals to be the worldwide leaders in their specialist sector. This role would suit a Project Engineer from manufacturing, background looking to work on multi million pound projects within a global business. The Role: Planning and managing CapEx projects up to the value of £1 million Handling budgets, timescales, and quality Getting quotations, tender evaluations, and generating progress reports Monday to Thursday, 8:30am - 4:45pm, finish at 3:45pm on Friday The Person: Project Engineer Manufacturing background Reference Number: BBBH26733d Engineer, Mechanical, Project, Engineering, Manufacturing, Manager, Capex, Projects, Design, Manufacture, Manufacturing, Ripley, Nottingham, Derby, Mansfield, Chesterfield, Alfreton If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. TPBN1_UKTJ

Browne Group is seeking a Senior Mechanical Design Engineer to lead multiple mechanical design packages across water and wastewater projects. You will own the design quality from concept to completion, ensuring compliance with safety, environmental, and client requirements. You will mentor junior engineers, drive best practices, and collaborate with multidisciplinary teams while providing support during procurement, installation and commissioning. #J-18808-Ljbffr